2018-12-03T21:14:51.699Z,1543871691.699 [CommandLine](IMPORTANT): got command restart logs 2018-12-03T21:14:52.022Z,1543871692.022 [MissionManager](IMPORTANT): Started mission Default 2018-12-03T21:14:52.022Z,1543871692.022 [Default] Running Loop=1 2018-12-03T21:14:52.022Z,1543871692.022 [Default](DEBUG): Aggregate::initialize Default 2018-12-03T21:14:52.022Z,1543871692.022 [Default:B.GoToSurface] Running Loop=1 2018-12-03T21:14:52.022Z,1543871692.022 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent. 2018-12-03T21:14:52.022Z,1543871692.022 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s. 2018-12-03T21:14:52.023Z,1543871692.023 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees. 2018-12-03T21:14:52.023Z,1543871692.023 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s. 2018-12-03T21:14:52.023Z,1543871692.023 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds. 2018-12-03T21:14:52.024Z,1543871692.024 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds. 2018-12-03T21:14:52.024Z,1543871692.024 [Default:A.Wait] Running Loop=1 2018-12-03T21:14:52.024Z,1543871692.024 [Default:A.Wait](DEBUG): Initialize Wait Component. 2018-12-03T21:15:05.230Z,1543871705.230 [Default:A.Wait](INFO): Done Waiting. 2018-12-03T21:15:05.230Z,1543871705.230 [Default:A.Wait] Stopped 2018-12-03T21:15:05.231Z,1543871705.231 [Default:A.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T21:15:05.624Z,1543871705.624 [Default:CheckIn] Running Loop=1 2018-12-03T21:15:05.624Z,1543871705.624 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T21:15:05.624Z,1543871705.624 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T21:15:06.395Z,1543871706.395 [NAL9602](INFO): Powering up 2018-12-03T21:15:17.552Z,1543871717.552 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:15:49.271Z,1543871749.271 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-03T21:15:49.354Z,1543871749.354 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-03T21:15:49.354Z,1543871749.354 [NAL9602] Data Fault, FailCount= 3 2018-12-03T21:15:49.354Z,1543871749.354 [NAL9602](ERROR): Data Fault 2018-12-03T21:15:49.417Z,1543871749.417 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T21:15:49.671Z,1543871749.671 [NAL9602](INFO): Powering down 2018-12-03T21:15:50.497Z,1543871750.497 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:15:50.497Z,1543871750.497 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-03T21:15:50.498Z,1543871750.498 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:15:50.500Z,1543871750.500 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:15:50.500Z,1543871750.500 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-03T21:15:50.500Z,1543871750.500 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:15:50.515Z,1543871750.515 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T21:15:50.515Z,1543871750.515 [NAL9602] No Fault, FailCount= 3 2018-12-03T21:15:50.515Z,1543871750.515 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:15:50.516Z,1543871750.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:15:50.910Z,1543871750.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:15:50.910Z,1543871750.910 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-03T21:15:50.915Z,1543871750.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:15:50.915Z,1543871750.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-03T21:15:51.302Z,1543871751.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:15:51.302Z,1543871751.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:15:51.303Z,1543871751.303 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:15:51.303Z,1543871751.303 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:15:51.303Z,1543871751.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:15:51.304Z,1543871751.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:16:20.441Z,1543871780.441 [NAL9602](INFO): Powering up NAL9602 2018-12-03T21:16:31.306Z,1543871791.306 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:16:32.101Z,1543871792.101 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T21:16:32.101Z,1543871792.101 [NAL9602] Data Fault, FailCount= 4 2018-12-03T21:16:32.101Z,1543871792.101 [NAL9602](ERROR): Data Fault 2018-12-03T21:16:32.220Z,1543871792.220 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T21:16:32.503Z,1543871792.503 [NAL9602](INFO): Powering down 2018-12-03T21:16:33.352Z,1543871793.352 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T21:16:33.353Z,1543871793.353 [NAL9602] No Fault, FailCount= 4 2018-12-03T21:17:02.556Z,1543871822.556 [NAL9602](INFO): Powering up NAL9602 2018-12-03T21:17:13.760Z,1543871833.760 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:17:51.343Z,1543871871.343 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:17:51.343Z,1543871871.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-03T21:17:51.343Z,1543871871.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:17:51.345Z,1543871871.345 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:17:51.345Z,1543871871.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-03T21:17:51.345Z,1543871871.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:17:51.391Z,1543871871.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:17:51.392Z,1543871871.392 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:17:51.754Z,1543871871.754 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:17:51.754Z,1543871871.754 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-03T21:17:51.755Z,1543871871.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:17:51.755Z,1543871871.755 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-03T21:17:52.138Z,1543871872.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:17:52.139Z,1543871872.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:17:52.139Z,1543871872.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:17:52.139Z,1543871872.139 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:17:52.140Z,1543871872.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:17:52.140Z,1543871872.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:19:52.169Z,1543871992.169 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:19:52.169Z,1543871992.169 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-03T21:19:52.169Z,1543871992.169 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:19:52.171Z,1543871992.171 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:19:52.172Z,1543871992.172 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-03T21:19:52.172Z,1543871992.172 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:19:52.185Z,1543871992.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:19:52.185Z,1543871992.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:19:52.316Z,1543871992.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:19:52.316Z,1543871992.316 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-03T21:19:52.316Z,1543871992.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:19:52.316Z,1543871992.316 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-03T21:19:52.634Z,1543871992.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:19:52.635Z,1543871992.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:19:52.635Z,1543871992.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:19:52.635Z,1543871992.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:19:52.636Z,1543871992.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:19:52.636Z,1543871992.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:20:05.834Z,1543872005.834 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T21:15:05.6Z 2018-12-03T21:20:05.835Z,1543872005.835 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T21:20:05.835Z,1543872005.835 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T21:20:10.351Z,1543872010.351 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181201T193800/Courier0864.lzma 2018-12-03T21:20:11.153Z,1543872011.153 [DataOverHttps](INFO): Moved sent file to Logs/20181201T193800/Courier0864.lzma.bak 2018-12-03T21:20:11.153Z,1543872011.153 [DataOverHttps](INFO): SBD MOMSN=8961500 2018-12-03T21:20:19.977Z,1543872019.977 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0000.lzma 2018-12-03T21:20:20.777Z,1543872020.777 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0000.lzma.bak 2018-12-03T21:20:20.777Z,1543872020.777 [DataOverHttps](INFO): SBD MOMSN=8961504 2018-12-03T21:20:20.782Z,1543872020.782 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T21:20:30.140Z,1543872030.140 [DataOverHttps](INFO): Sending 319 bytes from file Logs/20181201T193800/Express0865.lzma 2018-12-03T21:20:30.909Z,1543872030.909 [DataOverHttps](INFO): Moved sent file to Logs/20181201T193800/Express0865.lzma.bak 2018-12-03T21:20:30.910Z,1543872030.910 [DataOverHttps](INFO): SBD MOMSN=8961512 2018-12-03T21:20:40.684Z,1543872040.684 [DataOverHttps](INFO): Sending 463 bytes from file Logs/20181203T211451/Express0001.lzma 2018-12-03T21:20:41.481Z,1543872041.481 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0001.lzma.bak 2018-12-03T21:20:41.481Z,1543872041.481 [DataOverHttps](INFO): SBD MOMSN=8961523 2018-12-03T21:20:42.820Z,1543872042.820 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T21:20:42.820Z,1543872042.820 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T21:20:42.820Z,1543872042.820 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T21:20:52.047Z,1543872052.047 [NAL9602](INFO): Powering down 2018-12-03T21:20:52.122Z,1543872052.122 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-03T21:20:52.123Z,1543872052.123 [DropWeight] No Fault, FailCount= 1 2018-12-03T21:21:52.866Z,1543872112.866 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:21:52.866Z,1543872112.866 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-03T21:21:52.866Z,1543872112.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:21:52.868Z,1543872112.868 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:21:52.868Z,1543872112.868 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-03T21:21:52.869Z,1543872112.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:21:52.882Z,1543872112.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:21:52.912Z,1543872112.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:21:53.282Z,1543872113.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:21:53.282Z,1543872113.282 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-03T21:21:53.283Z,1543872113.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:21:53.283Z,1543872113.283 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-03T21:21:53.668Z,1543872113.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:21:53.668Z,1543872113.668 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:21:53.668Z,1543872113.668 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:21:53.669Z,1543872113.669 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:21:53.669Z,1543872113.669 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:21:53.670Z,1543872113.670 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:23:53.810Z,1543872233.810 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:23:53.811Z,1543872233.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-03T21:23:53.811Z,1543872233.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:23:53.813Z,1543872233.813 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:23:53.813Z,1543872233.813 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-03T21:23:53.813Z,1543872233.813 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:23:53.826Z,1543872233.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:23:53.826Z,1543872233.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:23:54.215Z,1543872234.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:23:54.215Z,1543872234.215 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-03T21:23:54.216Z,1543872234.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:23:54.216Z,1543872234.216 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-03T21:23:54.604Z,1543872234.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:23:54.604Z,1543872234.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:23:54.605Z,1543872234.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:23:54.605Z,1543872234.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:23:54.606Z,1543872234.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:23:54.606Z,1543872234.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:25:43.298Z,1543872343.298 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T21:25:43.299Z,1543872343.299 [Default:CheckIn:C.Wait] Stopped 2018-12-03T21:25:43.299Z,1543872343.299 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T21:25:43.299Z,1543872343.299 [Default:CheckIn:D] Running Loop=1 2018-12-03T21:25:43.674Z,1543872343.674 [Default:CheckIn:D] Stopped 2018-12-03T21:25:43.674Z,1543872343.674 [Default:CheckIn:E] Running Loop=1 2018-12-03T21:25:44.082Z,1543872344.082 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.860861 min 2018-12-03T21:25:44.083Z,1543872344.083 [Default:CheckIn:E] Stopped 2018-12-03T21:25:44.083Z,1543872344.083 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T21:25:44.083Z,1543872344.083 [Default:CheckIn] Stopped 2018-12-03T21:25:44.083Z,1543872344.083 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T21:25:44.083Z,1543872344.083 [Default:CheckIn](INFO): Running loop #2 2018-12-03T21:25:44.083Z,1543872344.083 [Default:CheckIn] Running Loop=2 2018-12-03T21:25:44.083Z,1543872344.083 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T21:25:44.083Z,1543872344.083 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T21:25:44.845Z,1543872344.845 [NAL9602](INFO): Powering up 2018-12-03T21:25:54.875Z,1543872354.875 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:25:54.875Z,1543872354.875 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-03T21:25:54.875Z,1543872354.875 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:25:54.877Z,1543872354.877 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:25:54.877Z,1543872354.877 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-03T21:25:54.878Z,1543872354.878 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:25:54.904Z,1543872354.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:25:54.904Z,1543872354.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:25:55.299Z,1543872355.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:25:55.300Z,1543872355.300 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-03T21:25:55.300Z,1543872355.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:25:55.300Z,1543872355.300 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-03T21:25:55.649Z,1543872355.649 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:25:55.686Z,1543872355.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:25:55.691Z,1543872355.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:25:55.691Z,1543872355.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:25:55.691Z,1543872355.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:25:55.692Z,1543872355.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:25:55.692Z,1543872355.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:27:55.877Z,1543872475.877 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:27:55.877Z,1543872475.877 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-03T21:27:55.877Z,1543872475.877 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:27:55.879Z,1543872475.879 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:27:55.879Z,1543872475.879 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-03T21:27:55.880Z,1543872475.880 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:27:55.893Z,1543872475.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:27:55.893Z,1543872475.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:27:56.304Z,1543872476.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:27:56.304Z,1543872476.304 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-03T21:27:56.305Z,1543872476.305 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:27:56.305Z,1543872476.305 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-03T21:27:56.678Z,1543872476.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:27:56.678Z,1543872476.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:27:56.679Z,1543872476.679 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:27:56.679Z,1543872476.679 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:27:56.679Z,1543872476.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:27:56.680Z,1543872476.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:29:56.710Z,1543872596.710 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:29:56.710Z,1543872596.710 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-03T21:29:56.710Z,1543872596.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:29:56.712Z,1543872596.712 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:29:56.712Z,1543872596.712 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-03T21:29:56.713Z,1543872596.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:29:56.726Z,1543872596.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:29:56.726Z,1543872596.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:29:57.130Z,1543872597.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:29:57.130Z,1543872597.130 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-03T21:29:57.130Z,1543872597.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:29:57.130Z,1543872597.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-03T21:29:57.514Z,1543872597.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:29:57.515Z,1543872597.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:29:57.515Z,1543872597.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:29:57.515Z,1543872597.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:29:57.516Z,1543872597.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:29:57.516Z,1543872597.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:30:45.058Z,1543872645.058 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T21:25:44.1Z 2018-12-03T21:30:45.058Z,1543872645.058 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T21:30:45.058Z,1543872645.058 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T21:30:49.957Z,1543872649.957 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0003.lzma 2018-12-03T21:30:50.761Z,1543872650.761 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0003.lzma.bak 2018-12-03T21:30:50.761Z,1543872650.761 [DataOverHttps](INFO): SBD MOMSN=8961550 2018-12-03T21:31:00.166Z,1543872660.166 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T21:31:00.625Z,1543872660.625 [DataOverHttps](INFO): Sending 317 bytes from file Logs/20181203T211451/Express0004.lzma 2018-12-03T21:31:01.800Z,1543872661.800 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0004.lzma.bak 2018-12-03T21:31:01.800Z,1543872661.800 [DataOverHttps](INFO): SBD MOMSN=8961552 2018-12-03T21:31:02.757Z,1543872662.757 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T21:31:02.757Z,1543872662.757 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T21:31:02.757Z,1543872662.757 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T21:31:30.367Z,1543872690.367 [NAL9602](INFO): Powering down 2018-12-03T21:31:57.726Z,1543872717.726 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:31:57.727Z,1543872717.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-03T21:31:57.727Z,1543872717.727 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:31:57.729Z,1543872717.729 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:31:57.729Z,1543872717.729 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-03T21:31:57.729Z,1543872717.729 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:31:57.742Z,1543872717.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:31:57.742Z,1543872717.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:31:58.135Z,1543872718.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:31:58.135Z,1543872718.135 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-03T21:31:58.136Z,1543872718.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:31:58.136Z,1543872718.136 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-03T21:31:58.522Z,1543872718.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:31:58.523Z,1543872718.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:31:58.523Z,1543872718.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:31:58.523Z,1543872718.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:31:58.524Z,1543872718.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:31:58.524Z,1543872718.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:33:58.570Z,1543872838.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:33:58.570Z,1543872838.570 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-03T21:33:58.570Z,1543872838.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:33:58.572Z,1543872838.572 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:33:58.572Z,1543872838.572 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-03T21:33:58.573Z,1543872838.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:33:58.586Z,1543872838.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:33:58.586Z,1543872838.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:33:58.982Z,1543872838.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:33:58.982Z,1543872838.982 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-03T21:33:58.982Z,1543872838.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:33:58.983Z,1543872838.983 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-03T21:33:59.374Z,1543872839.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:33:59.374Z,1543872839.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:33:59.375Z,1543872839.375 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:33:59.375Z,1543872839.375 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:33:59.375Z,1543872839.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:33:59.376Z,1543872839.376 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:35:59.442Z,1543872959.442 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:35:59.442Z,1543872959.442 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-03T21:35:59.442Z,1543872959.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:35:59.444Z,1543872959.444 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:35:59.444Z,1543872959.444 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-03T21:35:59.445Z,1543872959.445 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:35:59.458Z,1543872959.458 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:35:59.458Z,1543872959.458 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:35:59.847Z,1543872959.847 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:35:59.847Z,1543872959.847 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-03T21:35:59.848Z,1543872959.848 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:35:59.848Z,1543872959.848 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-03T21:36:00.238Z,1543872960.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:36:00.238Z,1543872960.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:36:00.239Z,1543872960.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:36:00.239Z,1543872960.239 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:36:00.240Z,1543872960.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:36:00.240Z,1543872960.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:36:03.039Z,1543872963.039 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T21:36:03.039Z,1543872963.039 [Default:CheckIn:C.Wait] Stopped 2018-12-03T21:36:03.039Z,1543872963.039 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T21:36:03.039Z,1543872963.039 [Default:CheckIn:D] Running Loop=1 2018-12-03T21:36:03.446Z,1543872963.446 [Default:CheckIn:D] Stopped 2018-12-03T21:36:03.446Z,1543872963.446 [Default:CheckIn:E] Running Loop=1 2018-12-03T21:36:03.846Z,1543872963.846 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.190397 min 2018-12-03T21:36:03.847Z,1543872963.847 [Default:CheckIn:E] Stopped 2018-12-03T21:36:03.847Z,1543872963.847 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T21:36:03.847Z,1543872963.847 [Default:CheckIn] Stopped 2018-12-03T21:36:03.847Z,1543872963.847 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T21:36:03.847Z,1543872963.847 [Default:CheckIn](INFO): Running loop #3 2018-12-03T21:36:03.847Z,1543872963.847 [Default:CheckIn] Running Loop=3 2018-12-03T21:36:03.847Z,1543872963.847 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T21:36:03.847Z,1543872963.847 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T21:36:04.611Z,1543872964.611 [NAL9602](INFO): Powering up 2018-12-03T21:36:15.812Z,1543872975.812 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:36:16.612Z,1543872976.612 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T21:36:16.612Z,1543872976.612 [NAL9602] Data Fault, FailCount= 5 2018-12-03T21:36:16.612Z,1543872976.612 [NAL9602](ERROR): Data Fault 2018-12-03T21:36:16.680Z,1543872976.680 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T21:36:16.680Z,1543872976.680 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-03T21:36:17.012Z,1543872977.012 [NAL9602](INFO): Powering down 2018-12-03T21:36:17.079Z,1543872977.079 [CBIT](INFO): Critical error at 20181203T213616 2018-12-03T21:38:00.578Z,1543873080.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:38:00.578Z,1543873080.578 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-03T21:38:00.578Z,1543873080.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:38:00.580Z,1543873080.580 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:38:00.580Z,1543873080.580 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-03T21:38:00.581Z,1543873080.581 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:38:00.594Z,1543873080.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:38:00.594Z,1543873080.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:38:00.985Z,1543873080.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:38:00.985Z,1543873080.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-03T21:38:00.986Z,1543873080.986 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:38:00.986Z,1543873080.986 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-03T21:38:01.376Z,1543873081.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:38:01.377Z,1543873081.377 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:38:01.377Z,1543873081.377 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:38:01.377Z,1543873081.377 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:38:01.378Z,1543873081.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:38:01.378Z,1543873081.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:38:16.940Z,1543873096.940 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T21:38:16.941Z,1543873096.941 [NAL9602] No Fault, FailCount= 5 2018-12-03T21:38:17.300Z,1543873097.300 [NAL9602](INFO): Powering up NAL9602 2018-12-03T21:38:28.500Z,1543873108.500 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:40:01.531Z,1543873201.531 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:40:01.531Z,1543873201.531 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-03T21:40:01.531Z,1543873201.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:40:01.533Z,1543873201.533 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:40:01.533Z,1543873201.533 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-03T21:40:01.533Z,1543873201.533 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:40:01.547Z,1543873201.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:40:01.547Z,1543873201.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:40:01.951Z,1543873201.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:40:01.952Z,1543873201.952 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-03T21:40:01.952Z,1543873201.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:40:01.952Z,1543873201.952 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-03T21:40:02.332Z,1543873202.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:40:02.333Z,1543873202.333 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:40:02.333Z,1543873202.333 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:40:02.334Z,1543873202.334 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:40:02.334Z,1543873202.334 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:40:02.334Z,1543873202.334 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:41:04.994Z,1543873264.994 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T21:36:03.8Z 2018-12-03T21:41:04.995Z,1543873264.995 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T21:41:04.995Z,1543873264.995 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T21:41:09.918Z,1543873269.918 [DataOverHttps](INFO): Sending 93 bytes from file Logs/20181203T211451/Courier0006.lzma 2018-12-03T21:41:10.717Z,1543873270.717 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0006.lzma.bak 2018-12-03T21:41:10.717Z,1543873270.717 [DataOverHttps](INFO): SBD MOMSN=8961584 2018-12-03T21:41:20.027Z,1543873280.027 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0007.lzma 2018-12-03T21:41:20.825Z,1543873280.825 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0007.lzma.bak 2018-12-03T21:41:20.825Z,1543873280.825 [DataOverHttps](INFO): SBD MOMSN=8961587 2018-12-03T21:41:22.083Z,1543873282.083 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T21:41:22.083Z,1543873282.083 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T21:41:22.083Z,1543873282.083 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T21:42:02.643Z,1543873322.643 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:42:02.643Z,1543873322.643 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-03T21:42:02.643Z,1543873322.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:42:02.645Z,1543873322.645 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:42:02.645Z,1543873322.645 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-03T21:42:02.645Z,1543873322.645 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:42:02.659Z,1543873322.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:42:02.659Z,1543873322.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:42:03.073Z,1543873323.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:42:03.073Z,1543873323.073 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-03T21:42:03.073Z,1543873323.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:42:03.073Z,1543873323.073 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-03T21:42:03.453Z,1543873323.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:42:03.454Z,1543873323.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:42:03.455Z,1543873323.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:42:03.455Z,1543873323.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:42:03.455Z,1543873323.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:42:03.456Z,1543873323.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:43:31.748Z,1543873411.748 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T21:44:02.495Z,1543873442.495 [NAL9602](INFO): Powering down 2018-12-03T21:44:03.722Z,1543873443.722 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:44:03.722Z,1543873443.722 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-03T21:44:03.722Z,1543873443.722 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:44:03.724Z,1543873443.724 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:44:03.724Z,1543873443.724 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-03T21:44:03.725Z,1543873443.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:44:03.738Z,1543873443.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:44:03.739Z,1543873443.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:44:04.142Z,1543873444.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:44:04.142Z,1543873444.142 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-03T21:44:04.143Z,1543873444.143 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:44:04.143Z,1543873444.143 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-03T21:44:04.526Z,1543873444.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:44:04.527Z,1543873444.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:44:04.527Z,1543873444.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:44:04.527Z,1543873444.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:44:04.528Z,1543873444.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:44:04.528Z,1543873444.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:46:07.372Z,1543873567.372 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:46:07.372Z,1543873567.372 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-03T21:46:07.372Z,1543873567.372 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:46:07.374Z,1543873567.374 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:46:07.374Z,1543873567.374 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-03T21:46:07.374Z,1543873567.374 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:46:07.388Z,1543873567.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:46:07.388Z,1543873567.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:46:07.519Z,1543873567.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:46:07.519Z,1543873567.519 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-03T21:46:07.520Z,1543873567.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:46:07.520Z,1543873567.520 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-03T21:46:07.830Z,1543873567.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:46:07.830Z,1543873567.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:46:07.831Z,1543873567.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:46:07.831Z,1543873567.831 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:46:07.831Z,1543873567.831 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:46:07.832Z,1543873567.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:46:22.234Z,1543873582.234 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T21:46:22.234Z,1543873582.234 [Default:CheckIn:C.Wait] Stopped 2018-12-03T21:46:22.234Z,1543873582.234 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T21:46:22.234Z,1543873582.234 [Default:CheckIn:D] Running Loop=1 2018-12-03T21:46:22.638Z,1543873582.638 [Default:CheckIn:D] Stopped 2018-12-03T21:46:22.638Z,1543873582.638 [Default:CheckIn:E] Running Loop=1 2018-12-03T21:46:23.029Z,1543873583.029 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.510262 min 2018-12-03T21:46:23.029Z,1543873583.029 [Default:CheckIn:E] Stopped 2018-12-03T21:46:23.029Z,1543873583.029 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T21:46:23.029Z,1543873583.029 [Default:CheckIn] Stopped 2018-12-03T21:46:23.030Z,1543873583.030 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T21:46:23.030Z,1543873583.030 [Default:CheckIn](INFO): Running loop #4 2018-12-03T21:46:23.030Z,1543873583.030 [Default:CheckIn] Running Loop=4 2018-12-03T21:46:23.030Z,1543873583.030 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T21:46:23.030Z,1543873583.030 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T21:46:23.807Z,1543873583.807 [NAL9602](INFO): Powering up 2018-12-03T21:46:35.004Z,1543873595.004 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:47:06.960Z,1543873626.960 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-03T21:47:07.042Z,1543873627.042 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-03T21:47:07.042Z,1543873627.042 [NAL9602] Data Fault, FailCount= 1 2018-12-03T21:47:07.042Z,1543873627.042 [NAL9602](ERROR): Data Fault 2018-12-03T21:47:07.078Z,1543873627.078 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T21:47:07.360Z,1543873627.360 [NAL9602](INFO): Powering down 2018-12-03T21:47:08.211Z,1543873628.211 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T21:47:08.211Z,1543873628.211 [NAL9602] No Fault, FailCount= 1 2018-12-03T21:47:37.703Z,1543873657.703 [NAL9602](INFO): Powering up NAL9602 2018-12-03T21:47:48.504Z,1543873668.504 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:48:07.865Z,1543873687.865 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:48:07.865Z,1543873687.865 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-03T21:48:07.865Z,1543873687.865 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:48:07.867Z,1543873687.867 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:48:07.867Z,1543873687.867 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-03T21:48:07.867Z,1543873687.867 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:48:07.881Z,1543873687.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:48:07.881Z,1543873687.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:48:08.275Z,1543873688.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:48:08.275Z,1543873688.275 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-03T21:48:08.276Z,1543873688.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:48:08.276Z,1543873688.276 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-03T21:48:08.658Z,1543873688.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:48:08.672Z,1543873688.672 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:48:08.673Z,1543873688.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:48:08.673Z,1543873688.673 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:48:08.673Z,1543873688.673 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:48:08.674Z,1543873688.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:50:08.714Z,1543873808.714 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:50:08.715Z,1543873808.715 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-03T21:50:08.715Z,1543873808.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:50:08.717Z,1543873808.717 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:50:08.717Z,1543873808.717 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-03T21:50:08.717Z,1543873808.717 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:50:08.731Z,1543873808.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:50:08.731Z,1543873808.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:50:09.130Z,1543873809.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:50:09.130Z,1543873809.130 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-03T21:50:09.130Z,1543873809.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:50:09.131Z,1543873809.131 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-03T21:50:09.518Z,1543873809.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:50:09.518Z,1543873809.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:50:09.519Z,1543873809.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:50:09.519Z,1543873809.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:50:09.519Z,1543873809.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:50:09.520Z,1543873809.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:50:53.590Z,1543873853.590 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-03T21:50:53.590Z,1543873853.590 [DropWeight] Hardware Fault, FailCount= 1 2018-12-03T21:50:53.590Z,1543873853.590 [DropWeight](ERROR): Hardware Fault 2018-12-03T21:50:53.622Z,1543873853.622 [CBIT](INFO): Critical error at 20181203T215053 2018-12-03T21:50:53.625Z,1543873853.625 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-03T21:50:53.625Z,1543873853.625 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-03T21:50:54.031Z,1543873854.031 [CBIT](INFO): Critical error at 20181203T215053 2018-12-03T21:51:24.391Z,1543873884.391 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T21:46:23.0Z 2018-12-03T21:51:24.391Z,1543873884.391 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T21:51:24.391Z,1543873884.391 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T21:51:29.287Z,1543873889.287 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181203T211451/Courier0009.lzma 2018-12-03T21:51:30.085Z,1543873890.085 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0009.lzma.bak 2018-12-03T21:51:30.085Z,1543873890.085 [DataOverHttps](INFO): SBD MOMSN=8961615 2018-12-03T21:51:39.273Z,1543873899.273 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T21:51:39.380Z,1543873899.380 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20181203T211451/Express0010.lzma 2018-12-03T21:51:40.181Z,1543873900.181 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0010.lzma.bak 2018-12-03T21:51:40.181Z,1543873900.181 [DataOverHttps](INFO): SBD MOMSN=8961620 2018-12-03T21:51:41.510Z,1543873901.510 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T21:51:41.510Z,1543873901.510 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T21:51:41.510Z,1543873901.510 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T21:52:09.487Z,1543873929.487 [NAL9602](INFO): Powering down 2018-12-03T21:52:09.911Z,1543873929.911 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:52:09.911Z,1543873929.911 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-03T21:52:09.911Z,1543873929.911 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:52:09.913Z,1543873929.913 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:52:09.913Z,1543873929.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-03T21:52:09.913Z,1543873929.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:52:09.927Z,1543873929.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:52:09.927Z,1543873929.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:52:10.337Z,1543873930.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:52:10.337Z,1543873930.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-03T21:52:10.338Z,1543873930.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:52:10.338Z,1543873930.338 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-03T21:52:10.710Z,1543873930.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:52:10.723Z,1543873930.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:52:10.724Z,1543873930.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:52:10.724Z,1543873930.724 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:52:10.725Z,1543873930.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:52:10.725Z,1543873930.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:54:10.807Z,1543874050.807 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:54:10.807Z,1543874050.807 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-03T21:54:10.807Z,1543874050.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:54:10.809Z,1543874050.809 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:54:10.810Z,1543874050.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-03T21:54:10.810Z,1543874050.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:54:10.823Z,1543874050.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:54:10.823Z,1543874050.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:54:11.219Z,1543874051.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:54:11.219Z,1543874051.219 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-03T21:54:11.220Z,1543874051.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:54:11.220Z,1543874051.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-03T21:54:11.618Z,1543874051.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:54:11.618Z,1543874051.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:54:11.619Z,1543874051.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:54:11.619Z,1543874051.619 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:54:11.619Z,1543874051.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:54:11.620Z,1543874051.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:56:11.885Z,1543874171.885 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:56:11.885Z,1543874171.885 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-03T21:56:11.886Z,1543874171.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:56:11.888Z,1543874171.888 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:56:11.888Z,1543874171.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-03T21:56:11.888Z,1543874171.888 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:56:11.902Z,1543874171.902 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:56:11.902Z,1543874171.902 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:56:12.292Z,1543874172.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:56:12.292Z,1543874172.292 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-03T21:56:12.293Z,1543874172.293 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:56:12.293Z,1543874172.293 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-03T21:56:12.690Z,1543874172.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:56:12.690Z,1543874172.690 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:56:12.691Z,1543874172.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:56:12.691Z,1543874172.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:56:12.691Z,1543874172.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:56:12.692Z,1543874172.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:56:41.626Z,1543874201.626 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T21:56:41.626Z,1543874201.626 [Default:CheckIn:C.Wait] Stopped 2018-12-03T21:56:41.626Z,1543874201.626 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T21:56:41.626Z,1543874201.626 [Default:CheckIn:D] Running Loop=1 2018-12-03T21:56:42.021Z,1543874202.021 [Default:CheckIn:D] Stopped 2018-12-03T21:56:42.021Z,1543874202.021 [Default:CheckIn:E] Running Loop=1 2018-12-03T21:56:42.420Z,1543874202.420 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.833309 min 2018-12-03T21:56:42.421Z,1543874202.421 [Default:CheckIn:E] Stopped 2018-12-03T21:56:42.421Z,1543874202.421 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T21:56:42.421Z,1543874202.421 [Default:CheckIn] Stopped 2018-12-03T21:56:42.421Z,1543874202.421 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T21:56:42.421Z,1543874202.421 [Default:CheckIn](INFO): Running loop #5 2018-12-03T21:56:42.421Z,1543874202.421 [Default:CheckIn] Running Loop=5 2018-12-03T21:56:42.421Z,1543874202.421 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T21:56:42.421Z,1543874202.421 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T21:56:43.192Z,1543874203.192 [NAL9602](INFO): Powering up 2018-12-03T21:56:54.392Z,1543874214.392 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:56:55.192Z,1543874215.192 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T21:56:55.192Z,1543874215.192 [NAL9602] Data Fault, FailCount= 2 2018-12-03T21:56:55.192Z,1543874215.192 [NAL9602](ERROR): Data Fault 2018-12-03T21:56:55.261Z,1543874215.261 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T21:56:55.591Z,1543874215.591 [NAL9602](INFO): Powering down 2018-12-03T21:56:56.436Z,1543874216.436 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T21:56:56.436Z,1543874216.436 [NAL9602] No Fault, FailCount= 2 2018-12-03T21:57:25.663Z,1543874245.663 [NAL9602](INFO): Powering up NAL9602 2018-12-03T21:57:38.015Z,1543874258.015 [NAL9602](INFO): NAL9602 initialized 2018-12-03T21:58:12.818Z,1543874292.818 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:58:12.818Z,1543874292.818 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-03T21:58:12.819Z,1543874292.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T21:58:12.821Z,1543874292.821 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T21:58:12.821Z,1543874292.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-03T21:58:12.821Z,1543874292.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T21:58:12.876Z,1543874292.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T21:58:12.876Z,1543874292.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T21:58:13.256Z,1543874293.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T21:58:13.256Z,1543874293.256 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-03T21:58:13.256Z,1543874293.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T21:58:13.256Z,1543874293.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-03T21:58:13.608Z,1543874293.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T21:58:13.609Z,1543874293.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:58:13.609Z,1543874293.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T21:58:13.609Z,1543874293.609 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T21:58:13.610Z,1543874293.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T21:58:13.610Z,1543874293.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:00:13.758Z,1543874413.758 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:00:13.758Z,1543874413.758 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-03T22:00:13.758Z,1543874413.758 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:00:13.760Z,1543874413.760 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:00:13.760Z,1543874413.760 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-03T22:00:13.760Z,1543874413.760 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:00:13.774Z,1543874413.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:00:13.775Z,1543874413.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:00:14.175Z,1543874414.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:00:14.175Z,1543874414.175 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-03T22:00:14.175Z,1543874414.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:00:14.176Z,1543874414.176 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-03T22:00:14.578Z,1543874414.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:00:14.579Z,1543874414.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:00:14.579Z,1543874414.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:00:14.580Z,1543874414.580 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:00:14.580Z,1543874414.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:00:14.580Z,1543874414.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:01:44.121Z,1543874504.121 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T21:56:42.4Z 2018-12-03T22:01:44.121Z,1543874504.121 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T22:01:44.121Z,1543874504.121 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T22:01:49.180Z,1543874509.180 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0012.lzma 2018-12-03T22:01:49.962Z,1543874509.962 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0012.lzma.bak 2018-12-03T22:01:49.962Z,1543874509.962 [DataOverHttps](INFO): SBD MOMSN=8961649 2018-12-03T22:01:59.353Z,1543874519.353 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0013.lzma 2018-12-03T22:02:00.153Z,1543874520.153 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0013.lzma.bak 2018-12-03T22:02:00.153Z,1543874520.153 [DataOverHttps](INFO): SBD MOMSN=8961651 2018-12-03T22:02:01.437Z,1543874521.437 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T22:02:01.437Z,1543874521.437 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T22:02:01.437Z,1543874521.437 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T22:02:14.798Z,1543874534.798 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:02:14.798Z,1543874534.798 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-03T22:02:14.798Z,1543874534.798 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:02:14.800Z,1543874534.800 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:02:14.801Z,1543874534.801 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-03T22:02:14.801Z,1543874534.801 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:02:14.815Z,1543874534.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:02:14.815Z,1543874534.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:02:15.215Z,1543874535.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:02:15.215Z,1543874535.215 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-03T22:02:15.215Z,1543874535.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:02:15.216Z,1543874535.216 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-03T22:02:15.598Z,1543874535.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:02:15.598Z,1543874535.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:02:15.599Z,1543874535.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:02:15.599Z,1543874535.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:02:15.600Z,1543874535.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:02:15.600Z,1543874535.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:02:41.188Z,1543874561.188 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T22:03:11.974Z,1543874591.974 [NAL9602](INFO): Powering down 2018-12-03T22:04:15.968Z,1543874655.968 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:04:15.968Z,1543874655.968 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-03T22:04:15.968Z,1543874655.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:04:15.970Z,1543874655.970 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:04:15.970Z,1543874655.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-03T22:04:15.970Z,1543874655.970 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:04:16.001Z,1543874656.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:04:16.001Z,1543874656.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:04:16.382Z,1543874656.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:04:16.382Z,1543874656.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-03T22:04:16.395Z,1543874656.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:04:16.395Z,1543874656.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-03T22:04:16.774Z,1543874656.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:04:16.774Z,1543874656.774 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:04:16.775Z,1543874656.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:04:16.775Z,1543874656.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:04:16.776Z,1543874656.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:04:16.776Z,1543874656.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:05:53.637Z,1543874753.637 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-03T22:05:53.638Z,1543874753.638 [DropWeight] No Fault, FailCount= 1 2018-12-03T22:06:16.866Z,1543874776.866 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:06:16.866Z,1543874776.866 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-03T22:06:16.867Z,1543874776.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:06:16.869Z,1543874776.869 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:06:16.869Z,1543874776.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-03T22:06:16.869Z,1543874776.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:06:16.882Z,1543874776.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:06:16.882Z,1543874776.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:06:17.271Z,1543874777.271 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:06:17.271Z,1543874777.271 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-03T22:06:17.272Z,1543874777.272 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:06:17.272Z,1543874777.272 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-03T22:06:17.666Z,1543874777.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:06:17.666Z,1543874777.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:06:17.667Z,1543874777.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:06:17.667Z,1543874777.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:06:17.668Z,1543874777.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:06:17.668Z,1543874777.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:07:01.649Z,1543874821.649 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T22:07:01.649Z,1543874821.649 [Default:CheckIn:C.Wait] Stopped 2018-12-03T22:07:01.649Z,1543874821.649 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T22:07:01.650Z,1543874821.650 [Default:CheckIn:D] Running Loop=1 2018-12-03T22:07:02.043Z,1543874822.043 [Default:CheckIn:D] Stopped 2018-12-03T22:07:02.043Z,1543874822.043 [Default:CheckIn:E] Running Loop=1 2018-12-03T22:07:02.444Z,1543874822.444 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.167013 min 2018-12-03T22:07:02.445Z,1543874822.445 [Default:CheckIn:E] Stopped 2018-12-03T22:07:02.445Z,1543874822.445 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T22:07:02.445Z,1543874822.445 [Default:CheckIn] Stopped 2018-12-03T22:07:02.445Z,1543874822.445 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T22:07:02.445Z,1543874822.445 [Default:CheckIn](INFO): Running loop #6 2018-12-03T22:07:02.445Z,1543874822.445 [Default:CheckIn] Running Loop=6 2018-12-03T22:07:02.445Z,1543874822.445 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T22:07:02.446Z,1543874822.446 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T22:07:03.215Z,1543874823.215 [NAL9602](INFO): Powering up 2018-12-03T22:07:14.416Z,1543874834.416 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:08:17.994Z,1543874897.994 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:08:17.995Z,1543874897.995 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-03T22:08:17.995Z,1543874897.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:08:17.997Z,1543874897.997 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:08:17.997Z,1543874897.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-03T22:08:17.997Z,1543874897.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:08:18.032Z,1543874898.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:08:18.032Z,1543874898.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:08:18.409Z,1543874898.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:08:18.409Z,1543874898.409 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-03T22:08:18.410Z,1543874898.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:08:18.410Z,1543874898.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-03T22:08:18.790Z,1543874898.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:08:18.805Z,1543874898.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:08:18.805Z,1543874898.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:08:18.805Z,1543874898.805 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:08:18.806Z,1543874898.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:08:18.806Z,1543874898.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:10:18.833Z,1543875018.833 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:10:18.833Z,1543875018.833 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-03T22:10:18.833Z,1543875018.833 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:10:18.835Z,1543875018.835 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:10:18.835Z,1543875018.835 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-03T22:10:18.835Z,1543875018.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:10:18.849Z,1543875018.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:10:18.849Z,1543875018.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:10:19.246Z,1543875019.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:10:19.246Z,1543875019.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-03T22:10:19.247Z,1543875019.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:10:19.247Z,1543875019.247 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-03T22:10:19.635Z,1543875019.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:10:19.635Z,1543875019.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:10:19.635Z,1543875019.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:10:19.636Z,1543875019.636 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:10:19.636Z,1543875019.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:10:19.637Z,1543875019.637 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:12:03.770Z,1543875123.770 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T22:07:02.4Z 2018-12-03T22:12:03.770Z,1543875123.770 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T22:12:03.771Z,1543875123.771 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T22:12:08.776Z,1543875128.776 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0015.lzma 2018-12-03T22:12:09.569Z,1543875129.569 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0015.lzma.bak 2018-12-03T22:12:09.569Z,1543875129.569 [DataOverHttps](INFO): SBD MOMSN=8961680 2018-12-03T22:12:19.217Z,1543875139.217 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T22:12:19.320Z,1543875139.320 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0016.lzma 2018-12-03T22:12:19.746Z,1543875139.746 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:12:19.746Z,1543875139.746 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-03T22:12:19.747Z,1543875139.747 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:12:19.749Z,1543875139.749 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:12:19.749Z,1543875139.749 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-03T22:12:19.749Z,1543875139.749 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:12:19.789Z,1543875139.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:12:19.789Z,1543875139.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:12:20.097Z,1543875140.097 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0016.lzma.bak 2018-12-03T22:12:20.097Z,1543875140.097 [DataOverHttps](INFO): SBD MOMSN=8961682 2018-12-03T22:12:20.262Z,1543875140.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:12:20.262Z,1543875140.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-03T22:12:20.263Z,1543875140.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:12:20.263Z,1543875140.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-03T22:12:21.396Z,1543875141.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:12:21.397Z,1543875141.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:12:21.397Z,1543875141.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:12:21.398Z,1543875141.398 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:12:21.398Z,1543875141.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:12:21.398Z,1543875141.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:12:21.401Z,1543875141.401 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T22:12:21.401Z,1543875141.401 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T22:12:21.401Z,1543875141.401 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T22:12:49.420Z,1543875169.420 [NAL9602](INFO): Powering down 2018-12-03T22:14:21.502Z,1543875261.502 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:14:21.503Z,1543875261.503 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-03T22:14:21.503Z,1543875261.503 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:14:21.505Z,1543875261.505 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:14:21.505Z,1543875261.505 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-03T22:14:21.505Z,1543875261.505 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:14:21.518Z,1543875261.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:14:21.518Z,1543875261.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:14:21.919Z,1543875261.919 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:14:21.919Z,1543875261.919 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-03T22:14:21.920Z,1543875261.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:14:21.920Z,1543875261.920 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-03T22:14:22.305Z,1543875262.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:14:22.306Z,1543875262.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:14:22.306Z,1543875262.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:14:22.307Z,1543875262.307 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:14:22.307Z,1543875262.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:14:22.307Z,1543875262.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:16:22.390Z,1543875382.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:16:22.390Z,1543875382.390 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-03T22:16:22.390Z,1543875382.390 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:16:22.392Z,1543875382.392 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:16:22.393Z,1543875382.393 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-03T22:16:22.393Z,1543875382.393 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:16:22.407Z,1543875382.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:16:22.407Z,1543875382.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:16:22.802Z,1543875382.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:16:22.802Z,1543875382.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-03T22:16:22.802Z,1543875382.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:16:22.803Z,1543875382.803 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-03T22:16:23.186Z,1543875383.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:16:23.187Z,1543875383.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:16:23.187Z,1543875383.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:16:23.187Z,1543875383.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:16:23.188Z,1543875383.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:16:23.188Z,1543875383.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:17:21.774Z,1543875441.774 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T22:17:21.775Z,1543875441.775 [Default:CheckIn:C.Wait] Stopped 2018-12-03T22:17:21.775Z,1543875441.775 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T22:17:21.775Z,1543875441.775 [Default:CheckIn:D] Running Loop=1 2018-12-03T22:17:22.160Z,1543875442.160 [Default:CheckIn:D] Stopped 2018-12-03T22:17:22.160Z,1543875442.160 [Default:CheckIn:E] Running Loop=1 2018-12-03T22:17:22.570Z,1543875442.570 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.502299 min 2018-12-03T22:17:22.571Z,1543875442.571 [Default:CheckIn:E] Stopped 2018-12-03T22:17:22.571Z,1543875442.571 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T22:17:22.571Z,1543875442.571 [Default:CheckIn] Stopped 2018-12-03T22:17:22.571Z,1543875442.571 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T22:17:22.571Z,1543875442.571 [Default:CheckIn](INFO): Running loop #7 2018-12-03T22:17:22.571Z,1543875442.571 [Default:CheckIn] Running Loop=7 2018-12-03T22:17:22.572Z,1543875442.572 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T22:17:22.572Z,1543875442.572 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T22:17:23.331Z,1543875443.331 [NAL9602](INFO): Powering up 2018-12-03T22:17:34.532Z,1543875454.532 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:17:35.332Z,1543875455.332 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T22:17:35.332Z,1543875455.332 [NAL9602] Data Fault, FailCount= 3 2018-12-03T22:17:35.332Z,1543875455.332 [NAL9602](ERROR): Data Fault 2018-12-03T22:17:35.396Z,1543875455.396 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T22:17:35.732Z,1543875455.732 [NAL9602](INFO): Powering down 2018-12-03T22:17:36.591Z,1543875456.591 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T22:17:36.592Z,1543875456.592 [NAL9602] No Fault, FailCount= 3 2018-12-03T22:18:06.121Z,1543875486.121 [NAL9602](INFO): Powering up NAL9602 2018-12-03T22:18:06.543Z,1543875486.543 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-03T22:18:17.400Z,1543875497.400 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:18:23.429Z,1543875503.429 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:18:23.429Z,1543875503.429 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-03T22:18:23.429Z,1543875503.429 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:18:23.432Z,1543875503.432 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:18:23.432Z,1543875503.432 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-03T22:18:23.432Z,1543875503.432 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:18:23.445Z,1543875503.445 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:18:23.445Z,1543875503.445 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:18:23.846Z,1543875503.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:18:23.846Z,1543875503.846 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-03T22:18:23.846Z,1543875503.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:18:23.846Z,1543875503.846 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-03T22:18:24.230Z,1543875504.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:18:24.230Z,1543875504.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:18:24.231Z,1543875504.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:18:24.231Z,1543875504.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:18:24.232Z,1543875504.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:18:24.232Z,1543875504.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:20:24.524Z,1543875624.524 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:20:24.524Z,1543875624.524 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-03T22:20:24.524Z,1543875624.524 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:20:24.526Z,1543875624.526 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:20:24.538Z,1543875624.538 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-03T22:20:24.539Z,1543875624.539 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:20:24.568Z,1543875624.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:20:24.568Z,1543875624.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:20:24.959Z,1543875624.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:20:24.959Z,1543875624.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-03T22:20:24.959Z,1543875624.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:20:24.960Z,1543875624.960 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-03T22:20:25.326Z,1543875625.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:20:25.327Z,1543875625.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:20:25.327Z,1543875625.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:20:25.327Z,1543875625.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:20:25.328Z,1543875625.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:20:25.328Z,1543875625.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:22:23.418Z,1543875743.418 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T22:17:22.6Z 2018-12-03T22:22:23.418Z,1543875743.418 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T22:22:23.419Z,1543875743.419 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T22:22:28.269Z,1543875748.269 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:22:28.269Z,1543875748.269 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-03T22:22:28.270Z,1543875748.270 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:22:28.272Z,1543875748.272 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:22:28.272Z,1543875748.272 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-03T22:22:28.272Z,1543875748.272 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:22:28.287Z,1543875748.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:22:28.287Z,1543875748.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:22:28.436Z,1543875748.436 [DataOverHttps](INFO): Sending 190 bytes from file Logs/20181203T211451/Courier0018.lzma 2018-12-03T22:22:28.492Z,1543875748.492 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:22:28.492Z,1543875748.492 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-03T22:22:28.493Z,1543875748.493 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:22:28.493Z,1543875748.493 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-03T22:22:28.732Z,1543875748.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:22:28.733Z,1543875748.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:22:28.733Z,1543875748.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:22:28.734Z,1543875748.734 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:22:28.734Z,1543875748.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:22:28.734Z,1543875748.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:22:29.097Z,1543875749.097 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0018.lzma.bak 2018-12-03T22:22:29.097Z,1543875749.097 [DataOverHttps](INFO): SBD MOMSN=8961711 2018-12-03T22:22:38.408Z,1543875758.408 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0019.lzma 2018-12-03T22:22:39.205Z,1543875759.205 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0019.lzma.bak 2018-12-03T22:22:39.205Z,1543875759.205 [DataOverHttps](INFO): SBD MOMSN=8961713 2018-12-03T22:22:40.510Z,1543875760.510 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T22:22:40.510Z,1543875760.510 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T22:22:40.510Z,1543875760.510 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T22:23:20.480Z,1543875800.480 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T22:23:51.281Z,1543875831.281 [NAL9602](INFO): Powering down 2018-12-03T22:24:29.840Z,1543875869.840 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:24:29.840Z,1543875869.840 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-03T22:24:29.840Z,1543875869.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:24:29.842Z,1543875869.842 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:24:29.843Z,1543875869.843 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-03T22:24:29.843Z,1543875869.843 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:24:29.886Z,1543875869.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:24:29.893Z,1543875869.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:24:29.985Z,1543875869.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:24:29.985Z,1543875869.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-03T22:24:29.985Z,1543875869.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:24:29.986Z,1543875869.986 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-03T22:24:30.338Z,1543875870.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:24:30.338Z,1543875870.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:24:30.339Z,1543875870.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:24:30.339Z,1543875870.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:24:30.339Z,1543875870.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:24:30.340Z,1543875870.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:26:30.585Z,1543875990.585 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:26:30.585Z,1543875990.585 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-03T22:26:30.585Z,1543875990.585 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:26:30.587Z,1543875990.587 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:26:30.587Z,1543875990.587 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-03T22:26:30.587Z,1543875990.587 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:26:30.601Z,1543875990.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:26:30.601Z,1543875990.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:26:31.006Z,1543875991.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:26:31.006Z,1543875991.006 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-03T22:26:31.007Z,1543875991.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:26:31.007Z,1543875991.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-03T22:26:31.394Z,1543875991.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:26:31.394Z,1543875991.394 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:26:31.395Z,1543875991.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:26:31.395Z,1543875991.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:26:31.396Z,1543875991.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:26:31.396Z,1543875991.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:27:40.722Z,1543876060.722 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T22:27:40.722Z,1543876060.722 [Default:CheckIn:C.Wait] Stopped 2018-12-03T22:27:40.722Z,1543876060.722 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T22:27:40.722Z,1543876060.722 [Default:CheckIn:D] Running Loop=1 2018-12-03T22:27:41.126Z,1543876061.126 [Default:CheckIn:D] Stopped 2018-12-03T22:27:41.126Z,1543876061.126 [Default:CheckIn:E] Running Loop=1 2018-12-03T22:27:41.522Z,1543876061.522 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.818400 min 2018-12-03T22:27:41.522Z,1543876061.522 [Default:CheckIn:E] Stopped 2018-12-03T22:27:41.522Z,1543876061.522 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T22:27:41.523Z,1543876061.523 [Default:CheckIn] Stopped 2018-12-03T22:27:41.523Z,1543876061.523 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T22:27:41.523Z,1543876061.523 [Default:CheckIn](INFO): Running loop #8 2018-12-03T22:27:41.523Z,1543876061.523 [Default:CheckIn] Running Loop=8 2018-12-03T22:27:41.523Z,1543876061.523 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T22:27:41.523Z,1543876061.523 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T22:27:42.299Z,1543876062.299 [NAL9602](INFO): Powering up 2018-12-03T22:27:53.504Z,1543876073.504 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:28:25.480Z,1543876105.480 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-03T22:28:25.562Z,1543876105.562 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-03T22:28:25.562Z,1543876105.562 [NAL9602] Data Fault, FailCount= 4 2018-12-03T22:28:25.562Z,1543876105.562 [NAL9602](ERROR): Data Fault 2018-12-03T22:28:25.596Z,1543876105.596 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T22:28:25.880Z,1543876105.880 [NAL9602](INFO): Powering down 2018-12-03T22:28:26.742Z,1543876106.742 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T22:28:26.742Z,1543876106.742 [NAL9602] No Fault, FailCount= 4 2018-12-03T22:28:31.502Z,1543876111.502 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:28:31.502Z,1543876111.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-03T22:28:31.502Z,1543876111.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:28:31.504Z,1543876111.504 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:28:31.504Z,1543876111.504 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-03T22:28:31.504Z,1543876111.504 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:28:31.560Z,1543876111.560 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:28:31.561Z,1543876111.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:28:31.942Z,1543876111.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:28:31.942Z,1543876111.942 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-03T22:28:31.943Z,1543876111.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:28:31.943Z,1543876111.943 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-03T22:28:32.298Z,1543876112.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:28:32.299Z,1543876112.299 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:28:32.299Z,1543876112.299 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:28:32.300Z,1543876112.300 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:28:32.300Z,1543876112.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:28:32.300Z,1543876112.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:28:56.228Z,1543876136.228 [NAL9602](INFO): Powering up NAL9602 2018-12-03T22:29:07.431Z,1543876147.431 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:29:08.228Z,1543876148.228 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T22:29:08.228Z,1543876148.228 [NAL9602] Data Fault, FailCount= 5 2018-12-03T22:29:08.228Z,1543876148.228 [NAL9602](ERROR): Data Fault 2018-12-03T22:29:08.263Z,1543876148.263 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T22:29:08.263Z,1543876148.263 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-03T22:29:11.321Z,1543876151.321 [NAL9602](INFO): Powering down 2018-12-03T22:29:11.365Z,1543876151.365 [CBIT](INFO): Critical error at 20181203T222908 2018-12-03T22:30:32.338Z,1543876232.338 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:30:32.338Z,1543876232.338 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-03T22:30:32.339Z,1543876232.339 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:30:32.341Z,1543876232.341 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:30:32.341Z,1543876232.341 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-03T22:30:32.341Z,1543876232.341 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:30:32.355Z,1543876232.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:30:32.355Z,1543876232.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:30:32.746Z,1543876232.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:30:32.746Z,1543876232.746 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-03T22:30:32.747Z,1543876232.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:30:32.747Z,1543876232.747 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-03T22:30:33.131Z,1543876233.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:30:33.131Z,1543876233.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:30:33.131Z,1543876233.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:30:33.132Z,1543876233.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:30:33.132Z,1543876233.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:30:33.133Z,1543876233.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:31:08.347Z,1543876268.347 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T22:31:08.347Z,1543876268.347 [NAL9602] No Fault, FailCount= 5 2018-12-03T22:31:08.712Z,1543876268.712 [NAL9602](INFO): Powering up NAL9602 2018-12-03T22:31:19.912Z,1543876279.912 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:32:33.477Z,1543876353.477 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:32:33.477Z,1543876353.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-03T22:32:33.478Z,1543876353.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:32:33.480Z,1543876353.480 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:32:33.480Z,1543876353.480 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-03T22:32:33.480Z,1543876353.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:32:33.494Z,1543876353.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:32:33.494Z,1543876353.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:32:33.887Z,1543876353.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:32:33.887Z,1543876353.887 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-03T22:32:33.888Z,1543876353.888 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:32:33.888Z,1543876353.888 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-03T22:32:34.258Z,1543876354.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:32:34.258Z,1543876354.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:32:34.259Z,1543876354.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:32:34.259Z,1543876354.259 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:32:34.259Z,1543876354.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:32:34.260Z,1543876354.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:32:42.709Z,1543876362.709 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T22:27:41.5Z 2018-12-03T22:32:42.709Z,1543876362.709 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T22:32:42.709Z,1543876362.709 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T22:32:47.841Z,1543876367.841 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0021.lzma 2018-12-03T22:32:48.625Z,1543876368.625 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0021.lzma.bak 2018-12-03T22:32:48.625Z,1543876368.625 [DataOverHttps](INFO): SBD MOMSN=8961741 2018-12-03T22:32:58.015Z,1543876378.015 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T22:32:58.073Z,1543876378.073 [DataOverHttps](INFO): Sending 353 bytes from file Logs/20181203T211451/Express0022.lzma 2018-12-03T22:32:58.873Z,1543876378.873 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0022.lzma.bak 2018-12-03T22:32:58.873Z,1543876378.873 [DataOverHttps](INFO): SBD MOMSN=8961744 2018-12-03T22:33:00.149Z,1543876380.149 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T22:33:00.149Z,1543876380.149 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T22:33:00.149Z,1543876380.149 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T22:33:28.264Z,1543876408.264 [NAL9602](INFO): Powering down 2018-12-03T22:34:34.624Z,1543876474.624 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:34:34.624Z,1543876474.624 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-03T22:34:34.624Z,1543876474.624 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:34:34.626Z,1543876474.626 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:34:34.626Z,1543876474.626 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-03T22:34:34.627Z,1543876474.627 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:34:34.641Z,1543876474.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:34:34.641Z,1543876474.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:34:35.039Z,1543876475.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:34:35.039Z,1543876475.039 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-03T22:34:35.040Z,1543876475.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:34:35.040Z,1543876475.040 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-03T22:34:35.431Z,1543876475.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:34:35.431Z,1543876475.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:34:35.431Z,1543876475.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:34:35.432Z,1543876475.432 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:34:35.432Z,1543876475.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:34:35.433Z,1543876475.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:35:55.063Z,1543876555.063 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-03T22:35:55.063Z,1543876555.063 [DropWeight] Hardware Fault, FailCount= 1 2018-12-03T22:35:55.063Z,1543876555.063 [DropWeight](ERROR): Hardware Fault 2018-12-03T22:35:55.135Z,1543876555.135 [CBIT](INFO): Critical error at 20181203T223555 2018-12-03T22:35:55.138Z,1543876555.138 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-03T22:35:55.139Z,1543876555.139 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-03T22:35:55.506Z,1543876555.506 [CBIT](INFO): Critical error at 20181203T223555 2018-12-03T22:36:35.542Z,1543876595.542 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:36:35.542Z,1543876595.542 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-03T22:36:35.543Z,1543876595.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:36:35.545Z,1543876595.545 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:36:35.545Z,1543876595.545 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-03T22:36:35.545Z,1543876595.545 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:36:35.558Z,1543876595.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:36:35.558Z,1543876595.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:36:35.963Z,1543876595.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:36:35.963Z,1543876595.963 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-03T22:36:35.964Z,1543876595.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:36:35.964Z,1543876595.964 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-03T22:36:36.346Z,1543876596.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:36:36.347Z,1543876596.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:36:36.347Z,1543876596.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:36:36.347Z,1543876596.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:36:36.348Z,1543876596.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:36:36.348Z,1543876596.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:38:00.249Z,1543876680.249 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T22:38:00.249Z,1543876680.249 [Default:CheckIn:C.Wait] Stopped 2018-12-03T22:38:00.249Z,1543876680.249 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T22:38:00.249Z,1543876680.249 [Default:CheckIn:D] Running Loop=1 2018-12-03T22:38:00.654Z,1543876680.654 [Default:CheckIn:D] Stopped 2018-12-03T22:38:00.654Z,1543876680.654 [Default:CheckIn:E] Running Loop=1 2018-12-03T22:38:01.054Z,1543876681.054 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.143864 min 2018-12-03T22:38:01.055Z,1543876681.055 [Default:CheckIn:E] Stopped 2018-12-03T22:38:01.055Z,1543876681.055 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T22:38:01.055Z,1543876681.055 [Default:CheckIn] Stopped 2018-12-03T22:38:01.055Z,1543876681.055 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T22:38:01.055Z,1543876681.055 [Default:CheckIn](INFO): Running loop #9 2018-12-03T22:38:01.055Z,1543876681.055 [Default:CheckIn] Running Loop=9 2018-12-03T22:38:01.056Z,1543876681.056 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T22:38:01.056Z,1543876681.056 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T22:38:01.824Z,1543876681.824 [NAL9602](INFO): Powering up 2018-12-03T22:38:13.024Z,1543876693.024 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:38:36.367Z,1543876716.367 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:38:36.367Z,1543876716.367 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-03T22:38:36.367Z,1543876716.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:38:36.369Z,1543876716.369 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:38:36.369Z,1543876716.369 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-03T22:38:36.369Z,1543876716.369 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:38:36.384Z,1543876716.384 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:38:36.384Z,1543876716.384 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:38:36.783Z,1543876716.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:38:36.783Z,1543876716.783 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-03T22:38:36.783Z,1543876716.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:38:36.783Z,1543876716.783 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-03T22:38:37.165Z,1543876717.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:38:37.166Z,1543876717.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:38:37.166Z,1543876717.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:38:37.166Z,1543876717.166 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:38:37.167Z,1543876717.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:38:37.167Z,1543876717.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:38:44.740Z,1543876724.740 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-03T22:38:44.814Z,1543876724.814 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-03T22:38:44.814Z,1543876724.814 [NAL9602] Data Fault, FailCount= 1 2018-12-03T22:38:44.814Z,1543876724.814 [NAL9602](ERROR): Data Fault 2018-12-03T22:38:44.853Z,1543876724.853 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T22:38:45.139Z,1543876725.139 [NAL9602](INFO): Powering down 2018-12-03T22:38:45.989Z,1543876725.989 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T22:38:45.989Z,1543876725.989 [NAL9602] No Fault, FailCount= 1 2018-12-03T22:39:15.203Z,1543876755.203 [NAL9602](INFO): Powering up NAL9602 2018-12-03T22:39:26.403Z,1543876766.403 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:40:37.559Z,1543876837.559 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:40:37.559Z,1543876837.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-03T22:40:37.559Z,1543876837.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:40:37.561Z,1543876837.561 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:40:37.561Z,1543876837.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-03T22:40:37.561Z,1543876837.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:40:37.604Z,1543876837.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:40:37.605Z,1543876837.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:40:37.992Z,1543876837.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:40:37.992Z,1543876837.992 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-03T22:40:37.992Z,1543876837.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:40:37.992Z,1543876837.992 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-03T22:40:38.385Z,1543876838.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:40:38.386Z,1543876838.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:40:38.386Z,1543876838.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:40:38.386Z,1543876838.386 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:40:38.387Z,1543876838.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:40:38.387Z,1543876838.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:42:38.591Z,1543876958.591 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:42:38.591Z,1543876958.591 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-03T22:42:38.591Z,1543876958.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:42:38.593Z,1543876958.593 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:42:38.593Z,1543876958.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-03T22:42:38.593Z,1543876958.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:42:38.631Z,1543876958.631 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:42:38.631Z,1543876958.631 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:42:38.990Z,1543876958.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:42:38.990Z,1543876958.990 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-03T22:42:38.991Z,1543876958.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:42:38.991Z,1543876958.991 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-03T22:42:39.378Z,1543876959.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:42:39.379Z,1543876959.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:42:39.379Z,1543876959.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:42:39.379Z,1543876959.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:42:39.380Z,1543876959.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:42:39.380Z,1543876959.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:43:02.468Z,1543876982.468 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T22:38:01.1Z 2018-12-03T22:43:02.468Z,1543876982.468 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T22:43:02.468Z,1543876982.468 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T22:43:03.350Z,1543876983.350 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0024.lzma 2018-12-03T22:43:04.225Z,1543876984.225 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0024.lzma.bak 2018-12-03T22:43:04.225Z,1543876984.225 [DataOverHttps](INFO): SBD MOMSN=8961777 2018-12-03T22:43:13.580Z,1543876993.580 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20181203T211451/Express0025.lzma 2018-12-03T22:43:14.369Z,1543876994.369 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0025.lzma.bak 2018-12-03T22:43:14.369Z,1543876994.369 [DataOverHttps](INFO): SBD MOMSN=8961781 2018-12-03T22:43:15.658Z,1543876995.658 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T22:43:15.658Z,1543876995.658 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T22:43:15.658Z,1543876995.658 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T22:43:18.795Z,1543876998.795 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T22:43:49.243Z,1543877029.243 [NAL9602](INFO): Powering down 2018-12-03T22:44:39.595Z,1543877079.595 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:44:39.595Z,1543877079.595 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-03T22:44:39.595Z,1543877079.595 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:44:39.597Z,1543877079.597 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:44:39.597Z,1543877079.597 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-03T22:44:39.597Z,1543877079.597 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:44:39.611Z,1543877079.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:44:39.611Z,1543877079.611 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:44:40.006Z,1543877080.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:44:40.007Z,1543877080.007 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-03T22:44:40.007Z,1543877080.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:44:40.007Z,1543877080.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-03T22:44:40.385Z,1543877080.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:44:40.385Z,1543877080.385 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:44:40.386Z,1543877080.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:44:40.386Z,1543877080.386 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:44:40.387Z,1543877080.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:44:40.387Z,1543877080.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:46:40.534Z,1543877200.534 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:46:40.534Z,1543877200.534 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-03T22:46:40.534Z,1543877200.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:46:40.536Z,1543877200.536 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:46:40.537Z,1543877200.537 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-03T22:46:40.537Z,1543877200.537 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:46:40.550Z,1543877200.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:46:40.551Z,1543877200.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:46:40.951Z,1543877200.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:46:40.951Z,1543877200.951 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-03T22:46:40.952Z,1543877200.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:46:40.952Z,1543877200.952 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-03T22:46:41.347Z,1543877201.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:46:41.347Z,1543877201.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:46:41.347Z,1543877201.347 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:46:41.348Z,1543877201.348 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:46:41.348Z,1543877201.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:46:41.348Z,1543877201.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:48:16.002Z,1543877296.002 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T22:48:16.002Z,1543877296.002 [Default:CheckIn:C.Wait] Stopped 2018-12-03T22:48:16.003Z,1543877296.003 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T22:48:16.003Z,1543877296.003 [Default:CheckIn:D] Running Loop=1 2018-12-03T22:48:16.394Z,1543877296.394 [Default:CheckIn:D] Stopped 2018-12-03T22:48:16.394Z,1543877296.394 [Default:CheckIn:E] Running Loop=1 2018-12-03T22:48:16.795Z,1543877296.795 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.406193 min 2018-12-03T22:48:16.796Z,1543877296.796 [Default:CheckIn:E] Stopped 2018-12-03T22:48:16.796Z,1543877296.796 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T22:48:16.796Z,1543877296.796 [Default:CheckIn] Stopped 2018-12-03T22:48:16.796Z,1543877296.796 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T22:48:16.796Z,1543877296.796 [Default:CheckIn](INFO): Running loop #10 2018-12-03T22:48:16.796Z,1543877296.796 [Default:CheckIn] Running Loop=10 2018-12-03T22:48:16.796Z,1543877296.796 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T22:48:16.796Z,1543877296.796 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T22:48:17.567Z,1543877297.567 [NAL9602](INFO): Powering up 2018-12-03T22:48:28.768Z,1543877308.768 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:48:29.572Z,1543877309.572 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T22:48:29.572Z,1543877309.572 [NAL9602] Data Fault, FailCount= 2 2018-12-03T22:48:29.572Z,1543877309.572 [NAL9602](ERROR): Data Fault 2018-12-03T22:48:29.625Z,1543877309.625 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T22:48:29.967Z,1543877309.967 [NAL9602](INFO): Powering down 2018-12-03T22:48:30.804Z,1543877310.804 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T22:48:30.804Z,1543877310.804 [NAL9602] No Fault, FailCount= 2 2018-12-03T22:48:41.602Z,1543877321.602 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:48:41.602Z,1543877321.602 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-03T22:48:41.602Z,1543877321.602 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:48:41.604Z,1543877321.604 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:48:41.604Z,1543877321.604 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-03T22:48:41.605Z,1543877321.605 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:48:41.618Z,1543877321.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:48:41.618Z,1543877321.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:48:42.014Z,1543877322.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:48:42.014Z,1543877322.014 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-03T22:48:42.015Z,1543877322.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:48:42.015Z,1543877322.015 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-03T22:48:42.396Z,1543877322.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:48:42.397Z,1543877322.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:48:42.397Z,1543877322.397 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:48:42.397Z,1543877322.397 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:48:42.398Z,1543877322.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:48:42.398Z,1543877322.398 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:48:59.975Z,1543877339.975 [NAL9602](INFO): Powering up NAL9602 2018-12-03T22:49:11.635Z,1543877351.635 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:50:42.417Z,1543877442.417 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:50:42.417Z,1543877442.417 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-03T22:50:42.417Z,1543877442.417 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:50:42.419Z,1543877442.419 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:50:42.419Z,1543877442.419 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-03T22:50:42.419Z,1543877442.419 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:50:42.434Z,1543877442.434 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:50:42.434Z,1543877442.434 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:50:42.830Z,1543877442.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:50:42.830Z,1543877442.830 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-03T22:50:42.830Z,1543877442.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:50:42.830Z,1543877442.830 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-03T22:50:43.221Z,1543877443.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:50:43.222Z,1543877443.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:50:43.222Z,1543877443.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:50:43.222Z,1543877443.222 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:50:43.223Z,1543877443.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:50:43.223Z,1543877443.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:50:56.746Z,1543877456.746 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-03T22:50:56.746Z,1543877456.746 [DropWeight] No Fault, FailCount= 1 2018-12-03T22:52:43.422Z,1543877563.422 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:52:43.422Z,1543877563.422 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-03T22:52:43.422Z,1543877563.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:52:43.424Z,1543877563.424 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:52:43.424Z,1543877563.424 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-03T22:52:43.425Z,1543877563.425 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:52:43.471Z,1543877563.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:52:43.472Z,1543877563.472 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:52:43.827Z,1543877563.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:52:43.827Z,1543877563.827 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-03T22:52:43.827Z,1543877563.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:52:43.828Z,1543877563.828 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-03T22:52:44.206Z,1543877564.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:52:44.207Z,1543877564.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:52:44.207Z,1543877564.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:52:44.215Z,1543877564.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:52:44.215Z,1543877564.215 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:52:44.216Z,1543877564.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:53:17.703Z,1543877597.703 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T22:48:16.8Z 2018-12-03T22:53:17.703Z,1543877597.703 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T22:53:17.703Z,1543877597.703 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T22:53:22.623Z,1543877602.623 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0027.lzma 2018-12-03T22:53:23.421Z,1543877603.421 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0027.lzma.bak 2018-12-03T22:53:23.421Z,1543877603.421 [DataOverHttps](INFO): SBD MOMSN=8961811 2018-12-03T22:53:33.236Z,1543877613.236 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0028.lzma 2018-12-03T22:53:34.033Z,1543877614.033 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0028.lzma.bak 2018-12-03T22:53:34.038Z,1543877614.038 [DataOverHttps](INFO): SBD MOMSN=8961813 2018-12-03T22:53:35.326Z,1543877615.326 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T22:53:35.326Z,1543877615.326 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T22:53:35.327Z,1543877615.327 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T22:54:14.242Z,1543877654.242 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T22:54:44.313Z,1543877684.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:54:44.313Z,1543877684.313 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-03T22:54:44.314Z,1543877684.314 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:54:44.316Z,1543877684.316 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:54:44.316Z,1543877684.316 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-03T22:54:44.316Z,1543877684.316 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:54:44.329Z,1543877684.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:54:44.329Z,1543877684.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:54:44.688Z,1543877684.688 [NAL9602](INFO): Powering down 2018-12-03T22:54:44.750Z,1543877684.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:54:44.750Z,1543877684.750 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-03T22:54:44.751Z,1543877684.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:54:44.751Z,1543877684.751 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-03T22:54:45.126Z,1543877685.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:54:45.127Z,1543877685.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:54:45.127Z,1543877685.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:54:45.127Z,1543877685.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:54:45.128Z,1543877685.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:54:45.128Z,1543877685.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:56:45.452Z,1543877805.452 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:56:45.452Z,1543877805.452 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-03T22:56:45.452Z,1543877805.452 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:56:45.454Z,1543877805.454 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:56:45.454Z,1543877805.454 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-03T22:56:45.454Z,1543877805.454 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:56:45.467Z,1543877805.467 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:56:45.468Z,1543877805.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:56:45.861Z,1543877805.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:56:45.861Z,1543877805.861 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-03T22:56:45.862Z,1543877805.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:56:45.862Z,1543877805.862 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-03T22:56:46.247Z,1543877806.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:56:46.248Z,1543877806.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:56:46.248Z,1543877806.248 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:56:46.249Z,1543877806.249 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:56:46.249Z,1543877806.249 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:56:46.249Z,1543877806.249 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:58:35.598Z,1543877915.598 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T22:58:35.598Z,1543877915.598 [Default:CheckIn:C.Wait] Stopped 2018-12-03T22:58:35.598Z,1543877915.598 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T22:58:35.598Z,1543877915.598 [Default:CheckIn:D] Running Loop=1 2018-12-03T22:58:35.999Z,1543877915.999 [Default:CheckIn:D] Stopped 2018-12-03T22:58:35.999Z,1543877915.999 [Default:CheckIn:E] Running Loop=1 2018-12-03T22:58:36.378Z,1543877916.378 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.732959 min 2018-12-03T22:58:36.378Z,1543877916.378 [Default:CheckIn:E] Stopped 2018-12-03T22:58:36.378Z,1543877916.378 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T22:58:36.378Z,1543877916.378 [Default:CheckIn] Stopped 2018-12-03T22:58:36.379Z,1543877916.379 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T22:58:36.379Z,1543877916.379 [Default:CheckIn](INFO): Running loop #11 2018-12-03T22:58:36.379Z,1543877916.379 [Default:CheckIn] Running Loop=11 2018-12-03T22:58:36.379Z,1543877916.379 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T22:58:36.379Z,1543877916.379 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T22:58:37.160Z,1543877917.160 [NAL9602](INFO): Powering up 2018-12-03T22:58:46.384Z,1543877926.384 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:58:46.384Z,1543877926.384 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-03T22:58:46.385Z,1543877926.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T22:58:46.387Z,1543877926.387 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T22:58:46.387Z,1543877926.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-03T22:58:46.387Z,1543877926.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T22:58:46.429Z,1543877926.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T22:58:46.429Z,1543877926.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T22:58:46.794Z,1543877926.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T22:58:46.794Z,1543877926.794 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-03T22:58:46.794Z,1543877926.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T22:58:46.794Z,1543877926.794 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-03T22:58:47.174Z,1543877927.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T22:58:47.175Z,1543877927.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:58:47.175Z,1543877927.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:58:47.176Z,1543877927.176 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T22:58:47.176Z,1543877927.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T22:58:47.176Z,1543877927.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T22:58:48.360Z,1543877928.360 [NAL9602](INFO): NAL9602 initialized 2018-12-03T22:59:20.308Z,1543877960.308 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-03T22:59:20.390Z,1543877960.390 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-03T22:59:20.390Z,1543877960.390 [NAL9602] Data Fault, FailCount= 3 2018-12-03T22:59:20.390Z,1543877960.390 [NAL9602](ERROR): Data Fault 2018-12-03T22:59:20.454Z,1543877960.454 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T22:59:20.708Z,1543877960.708 [NAL9602](INFO): Powering down 2018-12-03T22:59:21.561Z,1543877961.561 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T22:59:21.561Z,1543877961.561 [NAL9602] No Fault, FailCount= 3 2018-12-03T22:59:51.072Z,1543877991.072 [NAL9602](INFO): Powering up NAL9602 2018-12-03T23:00:02.276Z,1543878002.276 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:00:03.076Z,1543878003.076 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T23:00:03.076Z,1543878003.076 [NAL9602] Data Fault, FailCount= 4 2018-12-03T23:00:03.076Z,1543878003.076 [NAL9602](ERROR): Data Fault 2018-12-03T23:00:03.148Z,1543878003.148 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T23:00:06.337Z,1543878006.337 [NAL9602](INFO): Powering down 2018-12-03T23:00:06.832Z,1543878006.832 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T23:00:06.832Z,1543878006.832 [NAL9602] No Fault, FailCount= 4 2018-12-03T23:00:36.386Z,1543878036.386 [NAL9602](INFO): Powering up NAL9602 2018-12-03T23:00:47.236Z,1543878047.236 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:00:47.266Z,1543878047.266 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:00:47.267Z,1543878047.267 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-03T23:00:47.267Z,1543878047.267 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:00:47.269Z,1543878047.269 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:00:47.269Z,1543878047.269 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-03T23:00:47.269Z,1543878047.269 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:00:47.283Z,1543878047.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:00:47.283Z,1543878047.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:00:47.683Z,1543878047.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:00:47.683Z,1543878047.683 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-03T23:00:47.683Z,1543878047.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:00:47.683Z,1543878047.683 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-03T23:00:48.070Z,1543878048.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:00:48.075Z,1543878048.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:00:48.075Z,1543878048.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:00:48.075Z,1543878048.075 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:00:48.076Z,1543878048.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:00:48.076Z,1543878048.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:02:48.458Z,1543878168.458 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:02:48.458Z,1543878168.458 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-03T23:02:48.458Z,1543878168.458 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:02:48.460Z,1543878168.460 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:02:48.460Z,1543878168.460 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-03T23:02:48.461Z,1543878168.461 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:02:48.474Z,1543878168.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:02:48.474Z,1543878168.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:02:48.883Z,1543878168.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:02:48.883Z,1543878168.883 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-03T23:02:48.884Z,1543878168.884 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:02:48.884Z,1543878168.884 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-03T23:02:49.242Z,1543878169.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:02:49.258Z,1543878169.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:02:49.259Z,1543878169.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:02:49.259Z,1543878169.259 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:02:49.259Z,1543878169.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:02:49.260Z,1543878169.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:03:37.554Z,1543878217.554 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T22:58:36.4Z 2018-12-03T23:03:37.554Z,1543878217.554 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T23:03:37.555Z,1543878217.555 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T23:03:42.569Z,1543878222.569 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0030.lzma 2018-12-03T23:03:43.361Z,1543878223.361 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0030.lzma.bak 2018-12-03T23:03:43.361Z,1543878223.361 [DataOverHttps](INFO): SBD MOMSN=8961843 2018-12-03T23:03:52.682Z,1543878232.682 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T23:03:52.766Z,1543878232.766 [DataOverHttps](INFO): Sending 343 bytes from file Logs/20181203T211451/Express0031.lzma 2018-12-03T23:03:53.561Z,1543878233.561 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0031.lzma.bak 2018-12-03T23:03:53.561Z,1543878233.561 [DataOverHttps](INFO): SBD MOMSN=8961845 2018-12-03T23:03:54.888Z,1543878234.888 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T23:03:54.888Z,1543878234.888 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T23:03:54.888Z,1543878234.888 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T23:04:22.963Z,1543878262.963 [NAL9602](INFO): Powering down 2018-12-03T23:04:49.346Z,1543878289.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:04:49.346Z,1543878289.346 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-03T23:04:49.346Z,1543878289.346 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:04:49.348Z,1543878289.348 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:04:49.349Z,1543878289.349 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-03T23:04:49.349Z,1543878289.349 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:04:49.362Z,1543878289.362 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:04:49.363Z,1543878289.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:04:49.753Z,1543878289.753 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:04:49.753Z,1543878289.753 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-03T23:04:49.754Z,1543878289.754 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:04:49.754Z,1543878289.754 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-03T23:04:50.146Z,1543878290.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:04:50.146Z,1543878290.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:04:50.147Z,1543878290.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:04:50.147Z,1543878290.147 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:04:50.147Z,1543878290.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:04:50.148Z,1543878290.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:06:50.185Z,1543878410.185 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:06:50.185Z,1543878410.185 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-03T23:06:50.185Z,1543878410.185 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:06:50.199Z,1543878410.199 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:06:50.199Z,1543878410.199 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-03T23:06:50.199Z,1543878410.199 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:06:50.212Z,1543878410.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:06:50.213Z,1543878410.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:06:50.603Z,1543878410.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:06:50.603Z,1543878410.603 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-03T23:06:50.603Z,1543878410.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:06:50.603Z,1543878410.603 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-03T23:06:50.974Z,1543878410.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:06:50.974Z,1543878410.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:06:50.975Z,1543878410.975 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:06:50.975Z,1543878410.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:06:50.975Z,1543878410.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:06:50.976Z,1543878410.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:08:51.338Z,1543878531.338 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:08:51.338Z,1543878531.338 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-03T23:08:51.338Z,1543878531.338 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:08:51.340Z,1543878531.340 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:08:51.340Z,1543878531.340 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-03T23:08:51.341Z,1543878531.341 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:08:51.354Z,1543878531.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:08:51.354Z,1543878531.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:08:51.746Z,1543878531.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:08:51.746Z,1543878531.746 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-03T23:08:51.747Z,1543878531.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:08:51.747Z,1543878531.747 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-03T23:08:52.138Z,1543878532.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:08:52.138Z,1543878532.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:08:52.139Z,1543878532.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:08:52.139Z,1543878532.139 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:08:52.139Z,1543878532.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:08:52.140Z,1543878532.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:08:55.341Z,1543878535.341 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T23:08:55.342Z,1543878535.342 [Default:CheckIn:C.Wait] Stopped 2018-12-03T23:08:55.342Z,1543878535.342 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T23:08:55.342Z,1543878535.342 [Default:CheckIn:D] Running Loop=1 2018-12-03T23:08:55.731Z,1543878535.731 [Default:CheckIn:D] Stopped 2018-12-03T23:08:55.731Z,1543878535.731 [Default:CheckIn:E] Running Loop=1 2018-12-03T23:08:56.141Z,1543878536.141 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 114.061825 min 2018-12-03T23:08:56.141Z,1543878536.141 [Default:CheckIn:E] Stopped 2018-12-03T23:08:56.141Z,1543878536.141 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T23:08:56.141Z,1543878536.141 [Default:CheckIn] Stopped 2018-12-03T23:08:56.141Z,1543878536.141 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T23:08:56.141Z,1543878536.141 [Default:CheckIn](INFO): Running loop #12 2018-12-03T23:08:56.141Z,1543878536.141 [Default:CheckIn] Running Loop=12 2018-12-03T23:08:56.142Z,1543878536.142 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T23:08:56.142Z,1543878536.142 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T23:08:56.902Z,1543878536.902 [NAL9602](INFO): Powering up 2018-12-03T23:09:07.704Z,1543878547.704 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:09:39.664Z,1543878579.664 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-03T23:09:39.746Z,1543878579.746 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-03T23:09:39.747Z,1543878579.747 [NAL9602] Data Fault, FailCount= 5 2018-12-03T23:09:39.747Z,1543878579.747 [NAL9602](ERROR): Data Fault 2018-12-03T23:09:39.789Z,1543878579.789 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T23:09:39.789Z,1543878579.789 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-03T23:09:40.068Z,1543878580.068 [NAL9602](INFO): Powering down 2018-12-03T23:09:40.136Z,1543878580.136 [CBIT](INFO): Critical error at 20181203T230939 2018-12-03T23:10:52.226Z,1543878652.226 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:10:52.226Z,1543878652.226 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-03T23:10:52.226Z,1543878652.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:10:52.228Z,1543878652.228 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:10:52.228Z,1543878652.228 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-03T23:10:52.229Z,1543878652.229 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:10:52.242Z,1543878652.242 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:10:52.242Z,1543878652.242 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:10:52.633Z,1543878652.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:10:52.633Z,1543878652.633 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-03T23:10:52.633Z,1543878652.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:10:52.633Z,1543878652.633 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-03T23:10:53.025Z,1543878653.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:10:53.026Z,1543878653.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:10:53.026Z,1543878653.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:10:53.027Z,1543878653.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:10:53.028Z,1543878653.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:10:53.028Z,1543878653.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:11:39.795Z,1543878699.795 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T23:11:39.795Z,1543878699.795 [NAL9602] No Fault, FailCount= 5 2018-12-03T23:11:40.160Z,1543878700.160 [NAL9602](INFO): Powering up NAL9602 2018-12-03T23:11:51.360Z,1543878711.360 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:11:52.160Z,1543878712.160 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T23:11:52.160Z,1543878712.160 [NAL9602] Data Fault, FailCount= 1 2018-12-03T23:11:52.160Z,1543878712.160 [NAL9602](ERROR): Data Fault 2018-12-03T23:11:52.225Z,1543878712.225 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T23:11:52.560Z,1543878712.560 [NAL9602](INFO): Powering down 2018-12-03T23:11:53.407Z,1543878713.407 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T23:11:53.407Z,1543878713.407 [NAL9602] No Fault, FailCount= 1 2018-12-03T23:12:22.580Z,1543878742.580 [NAL9602](INFO): Powering up NAL9602 2018-12-03T23:12:33.784Z,1543878753.784 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:12:53.385Z,1543878773.385 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:12:53.385Z,1543878773.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-03T23:12:53.385Z,1543878773.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:12:53.388Z,1543878773.388 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:12:53.388Z,1543878773.388 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-03T23:12:53.388Z,1543878773.388 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:12:53.435Z,1543878773.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:12:53.436Z,1543878773.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:12:53.787Z,1543878773.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:12:53.787Z,1543878773.787 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-03T23:12:53.788Z,1543878773.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:12:53.788Z,1543878773.788 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-03T23:12:54.178Z,1543878774.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:12:54.179Z,1543878774.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:12:54.179Z,1543878774.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:12:54.179Z,1543878774.179 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:12:54.180Z,1543878774.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:12:54.180Z,1543878774.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:13:57.166Z,1543878837.166 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T23:08:56.1Z 2018-12-03T23:13:57.166Z,1543878837.166 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T23:13:57.167Z,1543878837.167 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T23:14:02.126Z,1543878842.126 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0033.lzma 2018-12-03T23:14:02.919Z,1543878842.919 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0033.lzma.bak 2018-12-03T23:14:02.919Z,1543878842.919 [DataOverHttps](INFO): SBD MOMSN=8961874 2018-12-03T23:14:12.168Z,1543878852.168 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T23:14:12.252Z,1543878852.252 [DataOverHttps](INFO): Sending 342 bytes from file Logs/20181203T211451/Express0034.lzma 2018-12-03T23:14:13.041Z,1543878853.041 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0034.lzma.bak 2018-12-03T23:14:13.041Z,1543878853.041 [DataOverHttps](INFO): SBD MOMSN=8961877 2018-12-03T23:14:14.320Z,1543878854.320 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T23:14:14.320Z,1543878854.320 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T23:14:14.320Z,1543878854.320 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T23:14:42.295Z,1543878882.295 [NAL9602](INFO): Powering down 2018-12-03T23:14:54.290Z,1543878894.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:14:54.290Z,1543878894.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-03T23:14:54.290Z,1543878894.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:14:54.292Z,1543878894.292 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:14:54.292Z,1543878894.292 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-03T23:14:54.292Z,1543878894.292 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:14:54.305Z,1543878894.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:14:54.306Z,1543878894.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:14:54.697Z,1543878894.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:14:54.697Z,1543878894.697 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-03T23:14:54.698Z,1543878894.698 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:14:54.698Z,1543878894.698 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-03T23:14:55.094Z,1543878895.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:14:55.094Z,1543878895.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:14:55.095Z,1543878895.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:14:55.095Z,1543878895.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:14:55.095Z,1543878895.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:14:55.096Z,1543878895.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:16:55.170Z,1543879015.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:16:55.170Z,1543879015.170 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-03T23:16:55.170Z,1543879015.170 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:16:55.172Z,1543879015.172 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:16:55.172Z,1543879015.172 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-03T23:16:55.172Z,1543879015.172 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:16:55.185Z,1543879015.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:16:55.186Z,1543879015.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:16:55.586Z,1543879015.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:16:55.586Z,1543879015.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-03T23:16:55.591Z,1543879015.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:16:55.591Z,1543879015.591 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-03T23:16:55.970Z,1543879015.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:16:55.971Z,1543879015.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:16:55.971Z,1543879015.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:16:55.972Z,1543879015.972 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:16:55.972Z,1543879015.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:16:55.972Z,1543879015.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:18:56.240Z,1543879136.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:18:56.240Z,1543879136.240 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-03T23:18:56.240Z,1543879136.240 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:18:56.243Z,1543879136.243 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:18:56.243Z,1543879136.243 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-03T23:18:56.243Z,1543879136.243 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:18:56.257Z,1543879136.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:18:56.257Z,1543879136.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:18:59.507Z,1543879139.507 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:18:59.507Z,1543879139.507 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-03T23:18:59.508Z,1543879139.508 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:18:59.508Z,1543879139.508 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-03T23:18:59.594Z,1543879139.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:18:59.594Z,1543879139.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:18:59.594Z,1543879139.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:18:59.595Z,1543879139.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:18:59.595Z,1543879139.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:18:59.596Z,1543879139.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:19:14.775Z,1543879154.775 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T23:19:14.775Z,1543879154.775 [Default:CheckIn:C.Wait] Stopped 2018-12-03T23:19:14.775Z,1543879154.775 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T23:19:14.775Z,1543879154.775 [Default:CheckIn:D] Running Loop=1 2018-12-03T23:19:15.188Z,1543879155.188 [Default:CheckIn:D] Stopped 2018-12-03T23:19:15.188Z,1543879155.188 [Default:CheckIn:E] Running Loop=1 2018-12-03T23:19:15.551Z,1543879155.551 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.386100 min 2018-12-03T23:19:15.552Z,1543879155.552 [Default:CheckIn:E] Stopped 2018-12-03T23:19:15.552Z,1543879155.552 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T23:19:15.552Z,1543879155.552 [Default:CheckIn] Stopped 2018-12-03T23:19:15.552Z,1543879155.552 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T23:19:15.552Z,1543879155.552 [Default:CheckIn](INFO): Running loop #13 2018-12-03T23:19:15.552Z,1543879155.552 [Default:CheckIn] Running Loop=13 2018-12-03T23:19:15.552Z,1543879155.552 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T23:19:15.552Z,1543879155.552 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T23:19:16.327Z,1543879156.327 [NAL9602](INFO): Powering up 2018-12-03T23:19:27.524Z,1543879167.524 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:19:59.196Z,1543879199.196 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-03T23:19:59.279Z,1543879199.279 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-03T23:19:59.279Z,1543879199.279 [NAL9602] Data Fault, FailCount= 2 2018-12-03T23:19:59.279Z,1543879199.279 [NAL9602](ERROR): Data Fault 2018-12-03T23:19:59.358Z,1543879199.358 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T23:19:59.596Z,1543879199.596 [NAL9602](INFO): Powering down 2018-12-03T23:20:00.439Z,1543879200.439 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T23:20:00.439Z,1543879200.439 [NAL9602] No Fault, FailCount= 2 2018-12-03T23:20:29.670Z,1543879229.670 [NAL9602](INFO): Powering up NAL9602 2018-12-03T23:20:40.472Z,1543879240.472 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:20:57.647Z,1543879257.647 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-03T23:20:57.647Z,1543879257.647 [DropWeight] Hardware Fault, FailCount= 1 2018-12-03T23:20:57.647Z,1543879257.647 [DropWeight](ERROR): Hardware Fault 2018-12-03T23:20:57.715Z,1543879257.715 [CBIT](INFO): Critical error at 20181203T232057 2018-12-03T23:20:57.718Z,1543879257.718 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-03T23:20:57.726Z,1543879257.726 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-03T23:20:58.113Z,1543879258.113 [CBIT](INFO): Critical error at 20181203T232057 2018-12-03T23:20:59.675Z,1543879259.675 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:20:59.676Z,1543879259.676 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-03T23:20:59.676Z,1543879259.676 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:20:59.678Z,1543879259.678 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:20:59.678Z,1543879259.678 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-03T23:20:59.678Z,1543879259.678 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:20:59.720Z,1543879259.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:20:59.720Z,1543879259.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:21:00.090Z,1543879260.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:21:00.090Z,1543879260.090 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-03T23:21:00.091Z,1543879260.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:21:00.091Z,1543879260.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-03T23:21:00.486Z,1543879260.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:21:00.487Z,1543879260.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:21:00.487Z,1543879260.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:21:00.487Z,1543879260.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:21:00.488Z,1543879260.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:21:00.488Z,1543879260.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:23:00.650Z,1543879380.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:23:00.650Z,1543879380.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-03T23:23:00.650Z,1543879380.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:23:00.652Z,1543879380.652 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:23:00.653Z,1543879380.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-03T23:23:00.653Z,1543879380.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:23:00.710Z,1543879380.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:23:00.710Z,1543879380.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:23:01.063Z,1543879381.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:23:01.063Z,1543879381.063 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-03T23:23:01.063Z,1543879381.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:23:01.063Z,1543879381.063 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-03T23:23:01.450Z,1543879381.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:23:01.450Z,1543879381.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:23:01.451Z,1543879381.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:23:01.451Z,1543879381.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:23:01.451Z,1543879381.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:23:01.452Z,1543879381.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:24:16.670Z,1543879456.670 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T23:19:15.6Z 2018-12-03T23:24:16.670Z,1543879456.670 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T23:24:16.670Z,1543879456.670 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T23:24:21.709Z,1543879461.709 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0036.lzma 2018-12-03T23:24:22.501Z,1543879462.501 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0036.lzma.bak 2018-12-03T23:24:22.501Z,1543879462.501 [DataOverHttps](INFO): SBD MOMSN=8961909 2018-12-03T23:24:31.767Z,1543879471.767 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T23:24:31.918Z,1543879471.918 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0037.lzma 2018-12-03T23:24:32.718Z,1543879472.718 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0037.lzma.bak 2018-12-03T23:24:32.720Z,1543879472.720 [DataOverHttps](INFO): SBD MOMSN=8961913 2018-12-03T23:24:33.978Z,1543879473.978 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T23:24:33.978Z,1543879473.978 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T23:24:33.978Z,1543879473.978 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T23:25:01.802Z,1543879501.802 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:25:01.802Z,1543879501.802 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-03T23:25:01.803Z,1543879501.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:25:01.805Z,1543879501.805 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:25:01.805Z,1543879501.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-03T23:25:01.805Z,1543879501.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:25:01.819Z,1543879501.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:25:01.820Z,1543879501.820 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:25:02.171Z,1543879502.171 [NAL9602](INFO): Powering down 2018-12-03T23:25:02.225Z,1543879502.225 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:25:02.225Z,1543879502.225 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-03T23:25:02.226Z,1543879502.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:25:02.226Z,1543879502.226 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-03T23:25:02.596Z,1543879502.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:25:02.596Z,1543879502.596 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:25:02.597Z,1543879502.597 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:25:02.597Z,1543879502.597 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:25:02.597Z,1543879502.597 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:25:02.598Z,1543879502.598 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:25:38.401Z,1543879538.401 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-03T23:27:02.660Z,1543879622.660 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:27:02.660Z,1543879622.660 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-03T23:27:02.660Z,1543879622.660 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:27:02.662Z,1543879622.662 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:27:02.662Z,1543879622.662 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-03T23:27:02.662Z,1543879622.662 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:27:02.676Z,1543879622.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:27:02.676Z,1543879622.676 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:27:02.676Z,1543879622.676 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:27:02.677Z,1543879622.677 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:29:34.377Z,1543879774.377 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T23:29:34.377Z,1543879774.377 [Default:CheckIn:C.Wait] Stopped 2018-12-03T23:29:34.377Z,1543879774.377 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T23:29:34.377Z,1543879774.377 [Default:CheckIn:D] Running Loop=1 2018-12-03T23:29:34.780Z,1543879774.780 [Default:CheckIn:D] Stopped 2018-12-03T23:29:34.780Z,1543879774.780 [Default:CheckIn:E] Running Loop=1 2018-12-03T23:29:35.178Z,1543879775.178 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.712638 min 2018-12-03T23:29:35.178Z,1543879775.178 [Default:CheckIn:E] Stopped 2018-12-03T23:29:35.178Z,1543879775.178 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T23:29:35.178Z,1543879775.178 [Default:CheckIn] Stopped 2018-12-03T23:29:35.178Z,1543879775.178 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T23:29:35.179Z,1543879775.179 [Default:CheckIn](INFO): Running loop #14 2018-12-03T23:29:35.179Z,1543879775.179 [Default:CheckIn] Running Loop=14 2018-12-03T23:29:35.179Z,1543879775.179 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T23:29:35.179Z,1543879775.179 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T23:29:35.951Z,1543879775.951 [NAL9602](INFO): Powering up 2018-12-03T23:29:47.148Z,1543879787.148 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:29:47.952Z,1543879787.952 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T23:29:47.952Z,1543879787.952 [NAL9602] Data Fault, FailCount= 3 2018-12-03T23:29:47.952Z,1543879787.952 [NAL9602](ERROR): Data Fault 2018-12-03T23:29:48.008Z,1543879788.008 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T23:29:48.348Z,1543879788.348 [NAL9602](INFO): Powering down 2018-12-03T23:29:49.202Z,1543879789.202 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T23:29:49.202Z,1543879789.202 [NAL9602] No Fault, FailCount= 3 2018-12-03T23:30:18.691Z,1543879818.691 [NAL9602](INFO): Powering up NAL9602 2018-12-03T23:30:29.616Z,1543879829.616 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:34:35.615Z,1543880075.615 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T23:29:35.2Z 2018-12-03T23:34:35.615Z,1543880075.615 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T23:34:35.616Z,1543880075.616 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T23:34:40.544Z,1543880080.544 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0039.lzma 2018-12-03T23:34:41.333Z,1543880081.333 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0039.lzma.bak 2018-12-03T23:34:41.334Z,1543880081.334 [DataOverHttps](INFO): SBD MOMSN=8961943 2018-12-03T23:34:51.239Z,1543880091.239 [DataOverHttps](INFO): Sending 377 bytes from file Logs/20181203T211451/Express0040.lzma 2018-12-03T23:34:52.020Z,1543880092.020 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0040.lzma.bak 2018-12-03T23:34:52.020Z,1543880092.020 [DataOverHttps](INFO): SBD MOMSN=8961945 2018-12-03T23:34:53.280Z,1543880093.280 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T23:34:53.280Z,1543880093.280 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T23:34:53.280Z,1543880093.280 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T23:35:32.820Z,1543880132.820 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T23:35:57.649Z,1543880157.649 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-03T23:35:57.649Z,1543880157.649 [DropWeight] No Fault, FailCount= 1 2018-12-03T23:36:03.220Z,1543880163.220 [NAL9602](INFO): Powering down 2018-12-03T23:39:53.538Z,1543880393.538 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T23:39:53.538Z,1543880393.538 [Default:CheckIn:C.Wait] Stopped 2018-12-03T23:39:53.538Z,1543880393.538 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T23:39:53.538Z,1543880393.538 [Default:CheckIn:D] Running Loop=1 2018-12-03T23:39:53.921Z,1543880393.921 [Default:CheckIn:D] Stopped 2018-12-03T23:39:53.921Z,1543880393.921 [Default:CheckIn:E] Running Loop=1 2018-12-03T23:39:54.339Z,1543880394.339 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 145.031657 min 2018-12-03T23:39:54.339Z,1543880394.339 [Default:CheckIn:E] Stopped 2018-12-03T23:39:54.339Z,1543880394.339 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T23:39:54.340Z,1543880394.340 [Default:CheckIn] Stopped 2018-12-03T23:39:54.340Z,1543880394.340 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T23:39:54.340Z,1543880394.340 [Default:CheckIn](INFO): Running loop #15 2018-12-03T23:39:54.340Z,1543880394.340 [Default:CheckIn] Running Loop=15 2018-12-03T23:39:54.340Z,1543880394.340 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T23:39:54.340Z,1543880394.340 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T23:39:55.101Z,1543880395.101 [NAL9602](INFO): Powering up 2018-12-03T23:40:05.908Z,1543880405.908 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:42:02.760Z,1543880522.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:42:02.760Z,1543880522.760 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-03T23:42:02.760Z,1543880522.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:42:02.761Z,1543880522.761 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-03T23:42:03.149Z,1543880523.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:42:03.150Z,1543880523.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:42:03.150Z,1543880523.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:42:03.151Z,1543880523.151 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:42:03.151Z,1543880523.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:42:03.151Z,1543880523.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:44:03.373Z,1543880643.373 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:44:03.373Z,1543880643.373 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-03T23:44:03.373Z,1543880643.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:44:03.375Z,1543880643.375 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:44:03.375Z,1543880643.375 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-03T23:44:03.376Z,1543880643.376 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:44:03.390Z,1543880643.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:44:03.390Z,1543880643.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:44:03.791Z,1543880643.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:44:03.791Z,1543880643.791 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-03T23:44:03.792Z,1543880643.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:44:03.792Z,1543880643.792 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-03T23:44:04.178Z,1543880644.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:44:04.179Z,1543880644.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:44:04.179Z,1543880644.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:44:04.179Z,1543880644.179 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:44:04.180Z,1543880644.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:44:04.180Z,1543880644.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:44:55.658Z,1543880695.658 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T23:39:54.3Z 2018-12-03T23:44:55.658Z,1543880695.658 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T23:44:55.659Z,1543880695.659 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T23:45:00.623Z,1543880700.623 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0042.lzma 2018-12-03T23:45:01.397Z,1543880701.397 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0042.lzma.bak 2018-12-03T23:45:01.397Z,1543880701.397 [DataOverHttps](INFO): SBD MOMSN=8961988 2018-12-03T23:45:10.712Z,1543880710.712 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T23:45:10.788Z,1543880710.788 [DataOverHttps](INFO): Sending 251 bytes from file Logs/20181203T211451/Express0043.lzma 2018-12-03T23:45:11.571Z,1543880711.571 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0043.lzma.bak 2018-12-03T23:45:11.571Z,1543880711.571 [DataOverHttps](INFO): SBD MOMSN=8961990 2018-12-03T23:45:12.850Z,1543880712.850 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T23:45:12.850Z,1543880712.850 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T23:45:12.850Z,1543880712.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T23:45:40.823Z,1543880740.823 [NAL9602](INFO): Powering down 2018-12-03T23:46:04.246Z,1543880764.246 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:46:04.247Z,1543880764.247 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-03T23:46:04.247Z,1543880764.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:46:04.249Z,1543880764.249 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:46:04.249Z,1543880764.249 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-03T23:46:04.249Z,1543880764.249 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:46:04.263Z,1543880764.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:46:04.263Z,1543880764.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:46:04.656Z,1543880764.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:46:04.656Z,1543880764.656 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-03T23:46:04.657Z,1543880764.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:46:04.657Z,1543880764.657 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-03T23:46:05.046Z,1543880765.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:46:05.047Z,1543880765.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:46:05.047Z,1543880765.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:46:05.047Z,1543880765.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:46:05.048Z,1543880765.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:46:05.048Z,1543880765.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:48:05.423Z,1543880885.423 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:48:05.423Z,1543880885.423 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-03T23:48:05.423Z,1543880885.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:48:05.425Z,1543880885.425 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:48:05.425Z,1543880885.425 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-03T23:48:05.425Z,1543880885.425 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:48:05.439Z,1543880885.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:48:05.439Z,1543880885.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:48:05.834Z,1543880885.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:48:05.834Z,1543880885.834 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-03T23:48:05.835Z,1543880885.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:48:05.835Z,1543880885.835 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-03T23:48:06.222Z,1543880886.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:48:06.222Z,1543880886.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:48:06.223Z,1543880886.223 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:48:06.223Z,1543880886.223 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:48:06.223Z,1543880886.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:48:06.224Z,1543880886.224 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:50:06.314Z,1543881006.314 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:50:06.314Z,1543881006.314 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-03T23:50:06.314Z,1543881006.314 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:50:06.316Z,1543881006.316 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:50:06.316Z,1543881006.316 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-03T23:50:06.317Z,1543881006.317 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:50:06.330Z,1543881006.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:50:06.330Z,1543881006.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:50:06.734Z,1543881006.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:50:06.734Z,1543881006.734 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-03T23:50:06.735Z,1543881006.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:50:06.735Z,1543881006.735 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-03T23:50:07.114Z,1543881007.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:50:07.114Z,1543881007.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:50:07.115Z,1543881007.115 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:50:07.115Z,1543881007.115 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:50:07.115Z,1543881007.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:50:07.116Z,1543881007.116 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:50:13.117Z,1543881013.117 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-03T23:50:13.117Z,1543881013.117 [Default:CheckIn:C.Wait] Stopped 2018-12-03T23:50:13.118Z,1543881013.118 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-03T23:50:13.118Z,1543881013.118 [Default:CheckIn:D] Running Loop=1 2018-12-03T23:50:13.518Z,1543881013.518 [Default:CheckIn:D] Stopped 2018-12-03T23:50:13.518Z,1543881013.518 [Default:CheckIn:E] Running Loop=1 2018-12-03T23:50:13.914Z,1543881013.914 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 155.358268 min 2018-12-03T23:50:13.914Z,1543881013.914 [Default:CheckIn:E] Stopped 2018-12-03T23:50:13.915Z,1543881013.915 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-03T23:50:13.915Z,1543881013.915 [Default:CheckIn] Stopped 2018-12-03T23:50:13.915Z,1543881013.915 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-03T23:50:13.915Z,1543881013.915 [Default:CheckIn](INFO): Running loop #16 2018-12-03T23:50:13.915Z,1543881013.915 [Default:CheckIn] Running Loop=16 2018-12-03T23:50:13.915Z,1543881013.915 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-03T23:50:13.915Z,1543881013.915 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-03T23:50:14.681Z,1543881014.681 [NAL9602](INFO): Powering up 2018-12-03T23:50:25.484Z,1543881025.484 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:50:26.284Z,1543881026.284 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-03T23:50:26.284Z,1543881026.284 [NAL9602] Data Fault, FailCount= 4 2018-12-03T23:50:26.284Z,1543881026.284 [NAL9602](ERROR): Data Fault 2018-12-03T23:50:26.364Z,1543881026.364 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-03T23:50:26.681Z,1543881026.681 [NAL9602](INFO): Powering down 2018-12-03T23:50:27.538Z,1543881027.538 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-03T23:50:27.538Z,1543881027.538 [NAL9602] No Fault, FailCount= 4 2018-12-03T23:50:57.060Z,1543881057.060 [NAL9602](INFO): Powering up NAL9602 2018-12-03T23:51:09.019Z,1543881069.019 [NAL9602](INFO): NAL9602 initialized 2018-12-03T23:52:07.190Z,1543881127.190 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:52:07.190Z,1543881127.190 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-03T23:52:07.190Z,1543881127.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:52:07.192Z,1543881127.192 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:52:07.192Z,1543881127.192 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-03T23:52:07.193Z,1543881127.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:52:07.206Z,1543881127.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:52:07.206Z,1543881127.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:52:07.599Z,1543881127.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:52:07.599Z,1543881127.599 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-03T23:52:07.600Z,1543881127.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:52:07.600Z,1543881127.600 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-03T23:52:07.990Z,1543881127.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:52:07.990Z,1543881127.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:52:07.991Z,1543881127.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:52:07.991Z,1543881127.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:52:07.992Z,1543881127.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:52:07.992Z,1543881127.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:54:08.362Z,1543881248.362 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:54:08.362Z,1543881248.362 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-03T23:54:08.362Z,1543881248.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:54:08.364Z,1543881248.364 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:54:08.364Z,1543881248.364 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-03T23:54:08.364Z,1543881248.364 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:54:08.378Z,1543881248.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:54:08.379Z,1543881248.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:54:08.784Z,1543881248.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:54:08.784Z,1543881248.784 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-03T23:54:08.785Z,1543881248.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:54:08.785Z,1543881248.785 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-03T23:54:09.169Z,1543881249.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:54:09.170Z,1543881249.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:54:09.170Z,1543881249.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:54:09.170Z,1543881249.170 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:54:09.171Z,1543881249.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:54:09.171Z,1543881249.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:55:15.274Z,1543881315.274 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-03T23:50:13.9Z 2018-12-03T23:55:15.274Z,1543881315.274 [Default:CheckIn:Read_GPS] Stopped 2018-12-03T23:55:15.275Z,1543881315.275 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-03T23:55:20.176Z,1543881320.176 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0045.lzma 2018-12-03T23:55:20.961Z,1543881320.961 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0045.lzma.bak 2018-12-03T23:55:20.961Z,1543881320.961 [DataOverHttps](INFO): SBD MOMSN=8962016 2018-12-03T23:55:30.698Z,1543881330.698 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0046.lzma 2018-12-03T23:55:31.860Z,1543881331.860 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0046.lzma.bak 2018-12-03T23:55:31.860Z,1543881331.860 [DataOverHttps](INFO): SBD MOMSN=8962018 2018-12-03T23:55:32.842Z,1543881332.842 [Default:CheckIn:Read_Iridium] Stopped 2018-12-03T23:55:32.842Z,1543881332.842 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-03T23:55:32.842Z,1543881332.842 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-03T23:56:11.978Z,1543881371.978 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:56:11.978Z,1543881371.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-03T23:56:11.978Z,1543881371.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:56:11.980Z,1543881371.980 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:56:11.980Z,1543881371.980 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-03T23:56:11.980Z,1543881371.980 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:56:11.993Z,1543881371.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:56:11.994Z,1543881371.994 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:56:12.141Z,1543881372.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:56:12.141Z,1543881372.141 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-03T23:56:12.142Z,1543881372.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:56:12.146Z,1543881372.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-03T23:56:12.418Z,1543881372.418 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-03T23:56:12.437Z,1543881372.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:56:12.438Z,1543881372.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:56:12.438Z,1543881372.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:56:12.439Z,1543881372.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:56:12.439Z,1543881372.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:56:12.439Z,1543881372.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:56:43.208Z,1543881403.208 [NAL9602](INFO): Powering down 2018-12-03T23:58:12.686Z,1543881492.686 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:58:12.686Z,1543881492.686 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-03T23:58:12.686Z,1543881492.686 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-03T23:58:12.688Z,1543881492.688 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-03T23:58:12.688Z,1543881492.688 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-03T23:58:12.688Z,1543881492.688 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-03T23:58:12.701Z,1543881492.701 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-03T23:58:12.702Z,1543881492.702 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-03T23:58:13.102Z,1543881493.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-03T23:58:13.102Z,1543881493.102 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-03T23:58:13.103Z,1543881493.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-03T23:58:13.103Z,1543881493.103 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-03T23:58:13.489Z,1543881493.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-03T23:58:13.489Z,1543881493.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:58:13.489Z,1543881493.489 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-03T23:58:13.490Z,1543881493.490 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-03T23:58:13.490Z,1543881493.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-03T23:58:13.491Z,1543881493.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:00:13.764Z,1543881613.764 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:00:13.764Z,1543881613.764 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-04T00:00:13.764Z,1543881613.764 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:00:13.766Z,1543881613.766 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:00:13.766Z,1543881613.766 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-04T00:00:13.766Z,1543881613.766 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:00:13.801Z,1543881613.801 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:00:13.801Z,1543881613.801 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:00:14.195Z,1543881614.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:00:14.195Z,1543881614.195 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-04T00:00:14.195Z,1543881614.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:00:14.195Z,1543881614.195 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-04T00:00:14.570Z,1543881614.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:00:14.570Z,1543881614.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:00:14.571Z,1543881614.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:00:14.571Z,1543881614.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:00:14.571Z,1543881614.571 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:00:14.572Z,1543881614.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:00:33.101Z,1543881633.101 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T00:00:33.101Z,1543881633.101 [Default:CheckIn:C.Wait] Stopped 2018-12-04T00:00:33.101Z,1543881633.101 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T00:00:33.101Z,1543881633.101 [Default:CheckIn:D] Running Loop=1 2018-12-04T00:00:33.504Z,1543881633.504 [Default:CheckIn:D] Stopped 2018-12-04T00:00:33.504Z,1543881633.504 [Default:CheckIn:E] Running Loop=1 2018-12-04T00:00:33.910Z,1543881633.910 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.691374 min 2018-12-04T00:00:33.910Z,1543881633.910 [Default:CheckIn:E] Stopped 2018-12-04T00:00:33.911Z,1543881633.911 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T00:00:33.911Z,1543881633.911 [Default:CheckIn] Stopped 2018-12-04T00:00:33.911Z,1543881633.911 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T00:00:33.911Z,1543881633.911 [Default:CheckIn](INFO): Running loop #17 2018-12-04T00:00:33.911Z,1543881633.911 [Default:CheckIn] Running Loop=17 2018-12-04T00:00:33.911Z,1543881633.911 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T00:00:33.911Z,1543881633.911 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T00:00:34.673Z,1543881634.673 [NAL9602](INFO): Powering up 2018-12-04T00:00:45.476Z,1543881645.476 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:01:17.102Z,1543881677.102 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T00:01:17.174Z,1543881677.174 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T00:01:17.174Z,1543881677.174 [NAL9602] Data Fault, FailCount= 5 2018-12-04T00:01:17.174Z,1543881677.174 [NAL9602](ERROR): Data Fault 2018-12-04T00:01:17.212Z,1543881677.212 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T00:01:17.212Z,1543881677.212 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T00:01:17.508Z,1543881677.508 [NAL9602](INFO): Powering down 2018-12-04T00:01:17.563Z,1543881677.563 [CBIT](INFO): Critical error at 20181204T000117 2018-12-04T00:02:14.658Z,1543881734.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:02:14.658Z,1543881734.658 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-04T00:02:14.658Z,1543881734.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:02:14.660Z,1543881734.660 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:02:14.661Z,1543881734.661 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-04T00:02:14.661Z,1543881734.661 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:02:14.674Z,1543881734.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:02:14.674Z,1543881734.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:02:15.065Z,1543881735.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:02:15.065Z,1543881735.065 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-04T00:02:15.066Z,1543881735.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:02:15.066Z,1543881735.066 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-04T00:02:15.452Z,1543881735.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:02:15.453Z,1543881735.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:02:15.453Z,1543881735.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:02:15.453Z,1543881735.453 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:02:15.454Z,1543881735.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:02:15.454Z,1543881735.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:03:17.543Z,1543881797.543 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T00:03:17.543Z,1543881797.543 [NAL9602] No Fault, FailCount= 5 2018-12-04T00:03:17.900Z,1543881797.900 [NAL9602](INFO): Powering up NAL9602 2018-12-04T00:03:29.100Z,1543881809.100 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:03:29.900Z,1543881809.900 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T00:03:29.900Z,1543881809.900 [NAL9602] Data Fault, FailCount= 1 2018-12-04T00:03:29.900Z,1543881809.900 [NAL9602](ERROR): Data Fault 2018-12-04T00:03:29.962Z,1543881809.962 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T00:03:30.300Z,1543881810.300 [NAL9602](INFO): Powering down 2018-12-04T00:03:31.144Z,1543881811.144 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T00:03:31.144Z,1543881811.144 [NAL9602] No Fault, FailCount= 1 2018-12-04T00:04:00.320Z,1543881840.320 [NAL9602](INFO): Powering up NAL9602 2018-12-04T00:04:11.520Z,1543881851.520 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:04:15.554Z,1543881855.554 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:04:15.554Z,1543881855.554 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-04T00:04:15.554Z,1543881855.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:04:15.556Z,1543881855.556 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:04:15.557Z,1543881855.557 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-04T00:04:15.557Z,1543881855.557 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:04:15.570Z,1543881855.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:04:15.570Z,1543881855.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:04:15.962Z,1543881855.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:04:15.962Z,1543881855.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-04T00:04:15.963Z,1543881855.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:04:15.963Z,1543881855.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-04T00:04:16.345Z,1543881856.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:04:16.345Z,1543881856.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:04:16.345Z,1543881856.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:04:16.346Z,1543881856.346 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:04:16.346Z,1543881856.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:04:16.347Z,1543881856.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:05:34.990Z,1543881934.990 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T00:00:33.9Z 2018-12-04T00:05:34.991Z,1543881934.991 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T00:05:34.991Z,1543881934.991 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T00:05:39.908Z,1543881939.908 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0048.lzma 2018-12-04T00:05:40.709Z,1543881940.709 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0048.lzma.bak 2018-12-04T00:05:40.709Z,1543881940.709 [DataOverHttps](INFO): SBD MOMSN=8962048 2018-12-04T00:05:49.929Z,1543881949.929 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T00:05:50.013Z,1543881950.013 [DataOverHttps](INFO): Sending 347 bytes from file Logs/20181203T211451/Express0049.lzma 2018-12-04T00:05:50.773Z,1543881950.773 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0049.lzma.bak 2018-12-04T00:05:50.773Z,1543881950.773 [DataOverHttps](INFO): SBD MOMSN=8962051 2018-12-04T00:05:52.044Z,1543881952.044 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T00:05:52.044Z,1543881952.044 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T00:05:52.044Z,1543881952.044 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T00:05:59.019Z,1543881959.019 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T00:05:59.019Z,1543881959.019 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T00:05:59.019Z,1543881959.019 [DropWeight](ERROR): Hardware Fault 2018-12-04T00:05:59.080Z,1543881959.080 [CBIT](INFO): Critical error at 20181204T000559 2018-12-04T00:05:59.082Z,1543881959.082 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T00:05:59.083Z,1543881959.083 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T00:05:59.465Z,1543881959.465 [CBIT](INFO): Critical error at 20181204T000559 2018-12-04T00:06:16.636Z,1543881976.636 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:06:16.636Z,1543881976.636 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-04T00:06:16.636Z,1543881976.636 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:06:16.638Z,1543881976.638 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:06:16.638Z,1543881976.638 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-04T00:06:16.638Z,1543881976.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:06:16.664Z,1543881976.664 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:06:16.664Z,1543881976.664 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:06:17.070Z,1543881977.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:06:17.070Z,1543881977.070 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-04T00:06:17.071Z,1543881977.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:06:17.071Z,1543881977.071 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-04T00:06:17.442Z,1543881977.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:06:17.442Z,1543881977.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:06:17.443Z,1543881977.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:06:17.443Z,1543881977.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:06:17.444Z,1543881977.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:06:17.444Z,1543881977.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:06:20.223Z,1543881980.223 [NAL9602](INFO): Powering down 2018-12-04T00:08:17.824Z,1543882097.824 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:08:17.824Z,1543882097.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-04T00:08:17.824Z,1543882097.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:08:17.826Z,1543882097.826 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:08:17.826Z,1543882097.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-04T00:08:17.826Z,1543882097.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:08:17.840Z,1543882097.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:08:17.840Z,1543882097.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:08:18.244Z,1543882098.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:08:18.244Z,1543882098.244 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-04T00:08:18.245Z,1543882098.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:08:18.245Z,1543882098.245 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-04T00:08:18.629Z,1543882098.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:08:18.630Z,1543882098.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:08:18.630Z,1543882098.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:08:18.631Z,1543882098.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:08:18.631Z,1543882098.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:08:18.631Z,1543882098.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:10:18.767Z,1543882218.767 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:10:18.767Z,1543882218.767 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-04T00:10:18.767Z,1543882218.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:10:18.769Z,1543882218.769 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:10:18.769Z,1543882218.769 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-04T00:10:18.769Z,1543882218.769 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:10:18.783Z,1543882218.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:10:18.783Z,1543882218.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:10:19.175Z,1543882219.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:10:19.176Z,1543882219.176 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-04T00:10:19.176Z,1543882219.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:10:19.176Z,1543882219.176 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-04T00:10:19.570Z,1543882219.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:10:19.571Z,1543882219.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:10:19.572Z,1543882219.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:10:19.572Z,1543882219.572 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:10:19.572Z,1543882219.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:10:19.573Z,1543882219.573 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:10:52.327Z,1543882252.327 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T00:10:52.327Z,1543882252.327 [Default:CheckIn:C.Wait] Stopped 2018-12-04T00:10:52.327Z,1543882252.327 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T00:10:52.327Z,1543882252.327 [Default:CheckIn:D] Running Loop=1 2018-12-04T00:10:52.722Z,1543882252.722 [Default:CheckIn:D] Stopped 2018-12-04T00:10:52.722Z,1543882252.722 [Default:CheckIn:E] Running Loop=1 2018-12-04T00:10:53.120Z,1543882253.120 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 176.011670 min 2018-12-04T00:10:53.120Z,1543882253.120 [Default:CheckIn:E] Stopped 2018-12-04T00:10:53.120Z,1543882253.120 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T00:10:53.120Z,1543882253.120 [Default:CheckIn] Stopped 2018-12-04T00:10:53.120Z,1543882253.120 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T00:10:53.120Z,1543882253.120 [Default:CheckIn](INFO): Running loop #18 2018-12-04T00:10:53.121Z,1543882253.121 [Default:CheckIn] Running Loop=18 2018-12-04T00:10:53.121Z,1543882253.121 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T00:10:53.121Z,1543882253.121 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T00:10:53.891Z,1543882253.891 [NAL9602](INFO): Powering up 2018-12-04T00:11:05.095Z,1543882265.095 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:11:37.037Z,1543882297.037 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T00:11:37.114Z,1543882297.114 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T00:11:37.114Z,1543882297.114 [NAL9602] Data Fault, FailCount= 2 2018-12-04T00:11:37.114Z,1543882297.114 [NAL9602](ERROR): Data Fault 2018-12-04T00:11:37.172Z,1543882297.172 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T00:11:37.439Z,1543882297.439 [NAL9602](INFO): Powering down 2018-12-04T00:11:38.306Z,1543882298.306 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T00:11:38.306Z,1543882298.306 [NAL9602] No Fault, FailCount= 2 2018-12-04T00:12:07.567Z,1543882327.567 [NAL9602](INFO): Powering up NAL9602 2018-12-04T00:12:18.767Z,1543882338.767 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:12:19.614Z,1543882339.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:12:19.615Z,1543882339.615 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-04T00:12:19.615Z,1543882339.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:12:19.617Z,1543882339.617 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:12:19.617Z,1543882339.617 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-04T00:12:19.617Z,1543882339.617 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:12:19.659Z,1543882339.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:12:19.659Z,1543882339.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:12:20.018Z,1543882340.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:12:20.018Z,1543882340.018 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-04T00:12:20.019Z,1543882340.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:12:20.019Z,1543882340.019 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-04T00:12:23.166Z,1543882343.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:12:23.166Z,1543882343.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:12:23.167Z,1543882343.167 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:12:23.167Z,1543882343.167 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:12:23.167Z,1543882343.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:12:23.168Z,1543882343.168 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:14:23.258Z,1543882463.258 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:14:23.258Z,1543882463.258 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-04T00:14:23.258Z,1543882463.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:14:23.260Z,1543882463.260 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:14:23.260Z,1543882463.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-04T00:14:23.261Z,1543882463.261 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:14:23.274Z,1543882463.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:14:23.274Z,1543882463.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:14:23.674Z,1543882463.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:14:23.674Z,1543882463.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-04T00:14:23.675Z,1543882463.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:14:23.675Z,1543882463.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-04T00:14:24.054Z,1543882464.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:14:24.059Z,1543882464.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:14:24.059Z,1543882464.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:14:24.059Z,1543882464.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:14:24.060Z,1543882464.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:14:24.060Z,1543882464.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:15:54.295Z,1543882554.295 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T00:10:53.1Z 2018-12-04T00:15:54.296Z,1543882554.296 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T00:15:54.296Z,1543882554.296 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T00:15:59.201Z,1543882559.201 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0051.lzma 2018-12-04T00:15:59.992Z,1543882559.992 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0051.lzma.bak 2018-12-04T00:15:59.992Z,1543882559.992 [DataOverHttps](INFO): SBD MOMSN=8962126 2018-12-04T00:16:09.622Z,1543882569.622 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T00:16:09.726Z,1543882569.726 [DataOverHttps](INFO): Sending 320 bytes from file Logs/20181203T211451/Express0052.lzma 2018-12-04T00:16:10.485Z,1543882570.485 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0052.lzma.bak 2018-12-04T00:16:10.485Z,1543882570.485 [DataOverHttps](INFO): SBD MOMSN=8962133 2018-12-04T00:16:11.776Z,1543882571.776 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T00:16:11.776Z,1543882571.776 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T00:16:11.776Z,1543882571.776 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T00:16:24.160Z,1543882584.160 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:16:24.160Z,1543882584.160 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-04T00:16:24.160Z,1543882584.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:16:24.174Z,1543882584.174 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:16:24.174Z,1543882584.174 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-04T00:16:24.174Z,1543882584.174 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:16:24.188Z,1543882584.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:16:24.188Z,1543882584.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:16:24.611Z,1543882584.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:16:24.611Z,1543882584.611 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-04T00:16:24.612Z,1543882584.612 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:16:24.612Z,1543882584.612 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-04T00:16:24.966Z,1543882584.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:16:24.966Z,1543882584.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:16:24.967Z,1543882584.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:16:24.967Z,1543882584.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:16:24.967Z,1543882584.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:16:24.968Z,1543882584.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:16:39.741Z,1543882599.741 [NAL9602](INFO): Powering down 2018-12-04T00:18:24.998Z,1543882704.998 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:18:24.998Z,1543882704.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-04T00:18:24.998Z,1543882704.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:18:25.000Z,1543882705.000 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:18:25.000Z,1543882705.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-04T00:18:25.001Z,1543882705.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:18:25.014Z,1543882705.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:18:25.014Z,1543882705.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:18:25.410Z,1543882705.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:18:25.410Z,1543882705.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-04T00:18:25.410Z,1543882705.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:18:25.411Z,1543882705.411 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-04T00:18:25.790Z,1543882705.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:18:25.790Z,1543882705.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:18:25.791Z,1543882705.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:18:25.791Z,1543882705.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:18:25.791Z,1543882705.791 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:18:25.792Z,1543882705.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:20:26.129Z,1543882826.129 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:20:26.129Z,1543882826.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-04T00:20:26.129Z,1543882826.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:20:26.131Z,1543882826.131 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:20:26.132Z,1543882826.132 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-04T00:20:26.132Z,1543882826.132 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:20:26.145Z,1543882826.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:20:26.146Z,1543882826.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:20:26.547Z,1543882826.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:20:26.547Z,1543882826.547 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-04T00:20:26.547Z,1543882826.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:20:26.547Z,1543882826.547 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-04T00:20:26.920Z,1543882826.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:20:26.920Z,1543882826.920 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:20:26.921Z,1543882826.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:20:26.921Z,1543882826.921 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:20:26.922Z,1543882826.922 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:20:26.922Z,1543882826.922 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:20:59.039Z,1543882859.039 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T00:20:59.039Z,1543882859.039 [DropWeight] No Fault, FailCount= 1 2018-12-04T00:21:12.247Z,1543882872.247 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T00:21:12.247Z,1543882872.247 [Default:CheckIn:C.Wait] Stopped 2018-12-04T00:21:12.247Z,1543882872.247 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T00:21:12.247Z,1543882872.247 [Default:CheckIn:D] Running Loop=1 2018-12-04T00:21:12.630Z,1543882872.630 [Default:CheckIn:D] Stopped 2018-12-04T00:21:12.630Z,1543882872.630 [Default:CheckIn:E] Running Loop=1 2018-12-04T00:21:13.026Z,1543882873.026 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 186.343457 min 2018-12-04T00:21:13.027Z,1543882873.027 [Default:CheckIn:E] Stopped 2018-12-04T00:21:13.027Z,1543882873.027 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T00:21:13.027Z,1543882873.027 [Default:CheckIn] Stopped 2018-12-04T00:21:13.027Z,1543882873.027 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T00:21:13.027Z,1543882873.027 [Default:CheckIn](INFO): Running loop #19 2018-12-04T00:21:13.027Z,1543882873.027 [Default:CheckIn] Running Loop=19 2018-12-04T00:21:13.027Z,1543882873.027 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T00:21:13.027Z,1543882873.027 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T00:21:13.803Z,1543882873.803 [NAL9602](INFO): Powering up 2018-12-04T00:21:25.004Z,1543882885.004 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:21:25.804Z,1543882885.804 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T00:21:25.804Z,1543882885.804 [NAL9602] Data Fault, FailCount= 3 2018-12-04T00:21:25.804Z,1543882885.804 [NAL9602](ERROR): Data Fault 2018-12-04T00:21:25.877Z,1543882885.877 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T00:21:26.204Z,1543882886.204 [NAL9602](INFO): Powering down 2018-12-04T00:21:27.073Z,1543882887.073 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T00:21:27.073Z,1543882887.073 [NAL9602] No Fault, FailCount= 3 2018-12-04T00:21:56.232Z,1543882916.232 [NAL9602](INFO): Powering up NAL9602 2018-12-04T00:22:07.852Z,1543882927.852 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:22:27.086Z,1543882947.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:22:27.086Z,1543882947.086 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-04T00:22:27.087Z,1543882947.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:22:27.089Z,1543882947.089 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:22:27.089Z,1543882947.089 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-04T00:22:27.089Z,1543882947.089 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:22:27.139Z,1543882947.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:22:27.140Z,1543882947.140 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:22:27.494Z,1543882947.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:22:27.494Z,1543882947.494 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-04T00:22:27.495Z,1543882947.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:22:27.495Z,1543882947.495 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-04T00:22:27.874Z,1543882947.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:22:27.874Z,1543882947.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:22:27.875Z,1543882947.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:22:27.875Z,1543882947.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:22:27.876Z,1543882947.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:22:27.876Z,1543882947.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:24:28.315Z,1543883068.315 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:24:28.315Z,1543883068.315 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-04T00:24:28.315Z,1543883068.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:24:28.317Z,1543883068.317 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:24:28.318Z,1543883068.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-04T00:24:28.318Z,1543883068.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:24:28.331Z,1543883068.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:24:28.332Z,1543883068.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:24:28.455Z,1543883068.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:24:28.455Z,1543883068.455 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-04T00:24:28.455Z,1543883068.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:24:28.456Z,1543883068.456 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-04T00:24:28.786Z,1543883068.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:24:28.786Z,1543883068.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:24:28.787Z,1543883068.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:24:28.787Z,1543883068.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:24:28.787Z,1543883068.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:24:28.788Z,1543883068.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:26:13.931Z,1543883173.931 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T00:21:13.0Z 2018-12-04T00:26:13.931Z,1543883173.931 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T00:26:13.931Z,1543883173.931 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T00:26:19.026Z,1543883179.026 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0054.lzma 2018-12-04T00:26:19.801Z,1543883179.801 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0054.lzma.bak 2018-12-04T00:26:19.801Z,1543883179.801 [DataOverHttps](INFO): SBD MOMSN=8962162 2018-12-04T00:26:29.189Z,1543883189.189 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:26:29.189Z,1543883189.189 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-04T00:26:29.189Z,1543883189.189 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:26:29.191Z,1543883189.191 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:26:29.191Z,1543883189.191 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-04T00:26:29.191Z,1543883189.191 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:26:29.204Z,1543883189.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:26:29.205Z,1543883189.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:26:29.251Z,1543883189.251 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0055.lzma 2018-12-04T00:26:29.339Z,1543883189.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:26:29.339Z,1543883189.339 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-04T00:26:29.339Z,1543883189.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:26:29.340Z,1543883189.340 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-04T00:26:29.670Z,1543883189.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:26:29.670Z,1543883189.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:26:29.671Z,1543883189.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:26:29.671Z,1543883189.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:26:29.672Z,1543883189.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:26:29.672Z,1543883189.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:26:30.045Z,1543883190.045 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0055.lzma.bak 2018-12-04T00:26:30.045Z,1543883190.045 [DataOverHttps](INFO): SBD MOMSN=8962164 2018-12-04T00:26:31.349Z,1543883191.349 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T00:26:31.349Z,1543883191.349 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T00:26:31.349Z,1543883191.349 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T00:27:10.780Z,1543883230.780 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T00:27:41.178Z,1543883261.178 [NAL9602](INFO): Powering down 2018-12-04T00:28:29.694Z,1543883309.694 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:28:29.694Z,1543883309.694 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-04T00:28:29.694Z,1543883309.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:28:29.696Z,1543883309.696 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:28:29.697Z,1543883309.697 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-04T00:28:29.697Z,1543883309.697 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:28:29.710Z,1543883309.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:28:29.730Z,1543883309.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:28:30.138Z,1543883310.138 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:28:30.138Z,1543883310.138 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-04T00:28:30.139Z,1543883310.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:28:30.139Z,1543883310.139 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-04T00:28:30.498Z,1543883310.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:28:30.498Z,1543883310.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:28:30.499Z,1543883310.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:28:30.499Z,1543883310.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:28:30.500Z,1543883310.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:28:30.500Z,1543883310.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:30:30.662Z,1543883430.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:30:30.662Z,1543883430.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-04T00:30:30.662Z,1543883430.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:30:30.664Z,1543883430.664 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:30:30.664Z,1543883430.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-04T00:30:30.664Z,1543883430.664 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:30:30.677Z,1543883430.677 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:30:30.678Z,1543883430.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:30:31.076Z,1543883431.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:30:31.077Z,1543883431.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-04T00:30:31.077Z,1543883431.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:30:31.077Z,1543883431.077 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-04T00:30:31.470Z,1543883431.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:30:31.470Z,1543883431.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:30:31.471Z,1543883431.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:30:31.471Z,1543883431.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:30:31.471Z,1543883431.471 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:30:31.472Z,1543883431.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:31:31.538Z,1543883491.538 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T00:31:31.538Z,1543883491.538 [Default:CheckIn:C.Wait] Stopped 2018-12-04T00:31:31.538Z,1543883491.538 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T00:31:31.538Z,1543883491.538 [Default:CheckIn:D] Running Loop=1 2018-12-04T00:31:31.939Z,1543883491.939 [Default:CheckIn:D] Stopped 2018-12-04T00:31:31.939Z,1543883491.939 [Default:CheckIn:E] Running Loop=1 2018-12-04T00:31:32.337Z,1543883492.337 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.665267 min 2018-12-04T00:31:32.337Z,1543883492.337 [Default:CheckIn:E] Stopped 2018-12-04T00:31:32.338Z,1543883492.338 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T00:31:32.338Z,1543883492.338 [Default:CheckIn] Stopped 2018-12-04T00:31:32.338Z,1543883492.338 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T00:31:32.338Z,1543883492.338 [Default:CheckIn](INFO): Running loop #20 2018-12-04T00:31:32.338Z,1543883492.338 [Default:CheckIn] Running Loop=20 2018-12-04T00:31:32.338Z,1543883492.338 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T00:31:32.338Z,1543883492.338 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T00:31:33.108Z,1543883493.108 [NAL9602](INFO): Powering up 2018-12-04T00:31:44.304Z,1543883504.304 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:32:31.782Z,1543883551.782 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:32:31.783Z,1543883551.783 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-04T00:32:31.783Z,1543883551.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:32:31.785Z,1543883551.785 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:32:31.785Z,1543883551.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-04T00:32:31.785Z,1543883551.785 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:32:31.804Z,1543883551.804 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:32:31.805Z,1543883551.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:32:32.173Z,1543883552.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:32:32.173Z,1543883552.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-04T00:32:32.174Z,1543883552.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:32:32.174Z,1543883552.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-04T00:32:32.542Z,1543883552.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:32:32.547Z,1543883552.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:32:32.547Z,1543883552.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:32:32.547Z,1543883552.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:32:32.548Z,1543883552.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:32:32.548Z,1543883552.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:33:07.125Z,1543883587.125 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T00:34:32.763Z,1543883672.763 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:34:32.763Z,1543883672.763 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-04T00:34:32.763Z,1543883672.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:34:32.765Z,1543883672.765 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:34:32.765Z,1543883672.765 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-04T00:34:32.765Z,1543883672.765 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:34:32.779Z,1543883672.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:34:32.779Z,1543883672.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:34:33.203Z,1543883673.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:34:33.203Z,1543883673.203 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-04T00:34:33.204Z,1543883673.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:34:33.204Z,1543883673.204 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-04T00:34:33.572Z,1543883673.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:34:33.573Z,1543883673.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:34:33.573Z,1543883673.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:34:33.574Z,1543883673.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:34:33.574Z,1543883673.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:34:33.575Z,1543883673.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:36:33.675Z,1543883793.675 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:36:33.675Z,1543883793.675 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-04T00:36:33.675Z,1543883793.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:36:33.677Z,1543883793.677 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:36:33.677Z,1543883793.677 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-04T00:36:33.677Z,1543883793.677 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:36:33.680Z,1543883793.680 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T00:31:32.3Z 2018-12-04T00:36:33.681Z,1543883793.681 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T00:36:33.681Z,1543883793.681 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T00:36:33.692Z,1543883793.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:36:33.692Z,1543883793.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:36:33.814Z,1543883793.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:36:33.815Z,1543883793.815 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-04T00:36:33.815Z,1543883793.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:36:33.815Z,1543883793.815 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-04T00:36:34.619Z,1543883794.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:36:34.620Z,1543883794.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:36:34.620Z,1543883794.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:36:34.621Z,1543883794.621 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:36:34.621Z,1543883794.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:36:34.621Z,1543883794.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:36:38.630Z,1543883798.630 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0057.lzma 2018-12-04T00:36:39.493Z,1543883799.493 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0057.lzma.bak 2018-12-04T00:36:39.493Z,1543883799.493 [DataOverHttps](INFO): SBD MOMSN=8962187 2018-12-04T00:36:48.708Z,1543883808.708 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T00:36:49.584Z,1543883809.584 [DataOverHttps](INFO): Sending 296 bytes from file Logs/20181203T211451/Express0058.lzma 2018-12-04T00:36:50.381Z,1543883810.381 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0058.lzma.bak 2018-12-04T00:36:50.381Z,1543883810.381 [DataOverHttps](INFO): SBD MOMSN=8962189 2018-12-04T00:36:51.720Z,1543883811.720 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T00:36:51.720Z,1543883811.720 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T00:36:51.720Z,1543883811.720 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T00:37:18.892Z,1543883838.892 [NAL9602](INFO): Powering down 2018-12-04T00:38:34.968Z,1543883914.968 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:38:34.968Z,1543883914.968 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-04T00:38:34.968Z,1543883914.968 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:38:34.970Z,1543883914.970 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:38:34.970Z,1543883914.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-04T00:38:34.970Z,1543883914.970 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:38:35.005Z,1543883915.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:38:35.005Z,1543883915.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:38:35.408Z,1543883915.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:38:35.408Z,1543883915.408 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-04T00:38:35.409Z,1543883915.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:38:35.409Z,1543883915.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-04T00:38:35.767Z,1543883915.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:38:35.768Z,1543883915.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:38:35.768Z,1543883915.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:38:35.769Z,1543883915.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:38:35.769Z,1543883915.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:38:35.769Z,1543883915.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:40:36.117Z,1543884036.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:40:36.117Z,1543884036.117 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-04T00:40:36.117Z,1543884036.117 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:40:36.119Z,1543884036.119 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:40:36.119Z,1543884036.119 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-04T00:40:36.119Z,1543884036.119 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:40:36.149Z,1543884036.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:40:36.150Z,1543884036.150 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:40:36.558Z,1543884036.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:40:36.559Z,1543884036.559 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-04T00:40:36.559Z,1543884036.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:40:36.559Z,1543884036.559 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-04T00:40:36.922Z,1543884036.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:40:36.922Z,1543884036.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:40:36.923Z,1543884036.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:40:36.923Z,1543884036.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:40:36.923Z,1543884036.923 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:40:36.924Z,1543884036.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:41:52.191Z,1543884112.191 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T00:41:52.191Z,1543884112.191 [Default:CheckIn:C.Wait] Stopped 2018-12-04T00:41:52.191Z,1543884112.191 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T00:41:52.191Z,1543884112.191 [Default:CheckIn:D] Running Loop=1 2018-12-04T00:41:52.594Z,1543884112.594 [Default:CheckIn:D] Stopped 2018-12-04T00:41:52.594Z,1543884112.594 [Default:CheckIn:E] Running Loop=1 2018-12-04T00:41:52.989Z,1543884112.989 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 207.009538 min 2018-12-04T00:41:52.990Z,1543884112.990 [Default:CheckIn:E] Stopped 2018-12-04T00:41:52.990Z,1543884112.990 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T00:41:52.990Z,1543884112.990 [Default:CheckIn] Stopped 2018-12-04T00:41:52.990Z,1543884112.990 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T00:41:52.990Z,1543884112.990 [Default:CheckIn](INFO): Running loop #21 2018-12-04T00:41:52.991Z,1543884112.991 [Default:CheckIn] Running Loop=21 2018-12-04T00:41:52.991Z,1543884112.991 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T00:41:52.991Z,1543884112.991 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T00:41:53.759Z,1543884113.759 [NAL9602](INFO): Powering up 2018-12-04T00:42:04.960Z,1543884124.960 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:42:05.759Z,1543884125.759 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T00:42:05.759Z,1543884125.759 [NAL9602] Data Fault, FailCount= 4 2018-12-04T00:42:05.759Z,1543884125.759 [NAL9602](ERROR): Data Fault 2018-12-04T00:42:05.840Z,1543884125.840 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T00:42:06.157Z,1543884126.157 [NAL9602](INFO): Powering down 2018-12-04T00:42:07.020Z,1543884127.020 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T00:42:07.020Z,1543884127.020 [NAL9602] No Fault, FailCount= 4 2018-12-04T00:42:36.235Z,1543884156.235 [NAL9602](INFO): Powering up NAL9602 2018-12-04T00:42:37.058Z,1543884157.058 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:42:37.058Z,1543884157.058 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-04T00:42:37.058Z,1543884157.058 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:42:37.060Z,1543884157.060 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:42:37.060Z,1543884157.060 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-04T00:42:37.061Z,1543884157.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:42:37.074Z,1543884157.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:42:37.074Z,1543884157.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:42:37.474Z,1543884157.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:42:37.474Z,1543884157.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-04T00:42:37.475Z,1543884157.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:42:37.475Z,1543884157.475 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-04T00:42:37.857Z,1543884157.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:42:37.857Z,1543884157.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:42:37.857Z,1543884157.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:42:37.858Z,1543884157.858 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:42:37.858Z,1543884157.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:42:37.859Z,1543884157.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:42:47.795Z,1543884167.795 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:44:37.912Z,1543884277.912 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:44:37.912Z,1543884277.912 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-04T00:44:37.912Z,1543884277.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:44:37.915Z,1543884277.915 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:44:37.915Z,1543884277.915 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-04T00:44:37.915Z,1543884277.915 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:44:37.929Z,1543884277.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:44:37.929Z,1543884277.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:44:38.381Z,1543884278.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:44:38.381Z,1543884278.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-04T00:44:38.382Z,1543884278.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:44:38.382Z,1543884278.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-04T00:44:38.685Z,1543884278.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:44:38.685Z,1543884278.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:44:38.686Z,1543884278.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:44:38.686Z,1543884278.686 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:44:38.687Z,1543884278.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:44:38.687Z,1543884278.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:46:38.716Z,1543884398.716 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:46:38.716Z,1543884398.716 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-04T00:46:38.716Z,1543884398.716 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:46:38.718Z,1543884398.718 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:46:38.718Z,1543884398.718 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-04T00:46:38.718Z,1543884398.718 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:46:38.731Z,1543884398.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:46:38.732Z,1543884398.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:46:39.134Z,1543884399.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:46:39.134Z,1543884399.134 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-04T00:46:39.135Z,1543884399.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:46:39.135Z,1543884399.135 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-04T00:46:39.522Z,1543884399.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:46:39.522Z,1543884399.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:46:39.523Z,1543884399.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:46:39.523Z,1543884399.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:46:39.523Z,1543884399.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:46:39.524Z,1543884399.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:46:53.838Z,1543884413.838 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T00:41:52.0Z 2018-12-04T00:46:53.839Z,1543884413.839 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T00:46:53.839Z,1543884413.839 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T00:46:58.968Z,1543884418.968 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0060.lzma 2018-12-04T00:46:59.769Z,1543884419.769 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0060.lzma.bak 2018-12-04T00:46:59.769Z,1543884419.769 [DataOverHttps](INFO): SBD MOMSN=8962214 2018-12-04T00:47:09.058Z,1543884429.058 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0061.lzma 2018-12-04T00:47:09.829Z,1543884429.829 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0061.lzma.bak 2018-12-04T00:47:09.840Z,1543884429.840 [DataOverHttps](INFO): SBD MOMSN=8962216 2018-12-04T00:47:11.107Z,1543884431.107 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T00:47:11.107Z,1543884431.107 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T00:47:11.107Z,1543884431.107 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T00:47:50.883Z,1543884470.883 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T00:48:21.276Z,1543884501.276 [NAL9602](INFO): Powering down 2018-12-04T00:48:39.722Z,1543884519.722 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:48:39.722Z,1543884519.722 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-04T00:48:39.722Z,1543884519.722 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:48:39.724Z,1543884519.724 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:48:39.724Z,1543884519.724 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-04T00:48:39.725Z,1543884519.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:48:39.738Z,1543884519.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:48:39.738Z,1543884519.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:48:40.133Z,1543884520.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:48:40.133Z,1543884520.133 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-04T00:48:40.133Z,1543884520.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:48:40.133Z,1543884520.133 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-04T00:48:40.522Z,1543884520.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:48:40.522Z,1543884520.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:48:40.523Z,1543884520.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:48:40.523Z,1543884520.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:48:40.523Z,1543884520.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:48:40.524Z,1543884520.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:50:40.905Z,1543884640.905 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:50:40.905Z,1543884640.905 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-04T00:50:40.905Z,1543884640.905 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:50:40.907Z,1543884640.907 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:50:40.907Z,1543884640.907 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-04T00:50:40.907Z,1543884640.907 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:50:40.934Z,1543884640.934 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:50:40.935Z,1543884640.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:50:41.320Z,1543884641.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:50:41.320Z,1543884641.320 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-04T00:50:41.321Z,1543884641.321 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:50:41.321Z,1543884641.321 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-04T00:50:41.716Z,1543884641.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:50:41.717Z,1543884641.717 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:50:41.717Z,1543884641.717 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:50:41.718Z,1543884641.718 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:50:41.718Z,1543884641.718 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:50:41.718Z,1543884641.718 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:51:00.219Z,1543884660.219 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T00:51:00.219Z,1543884660.219 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T00:51:00.219Z,1543884660.219 [DropWeight](ERROR): Hardware Fault 2018-12-04T00:51:00.291Z,1543884660.291 [CBIT](INFO): Critical error at 20181204T005100 2018-12-04T00:51:00.294Z,1543884660.294 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T00:51:00.294Z,1543884660.294 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T00:51:00.662Z,1543884660.662 [CBIT](INFO): Critical error at 20181204T005100 2018-12-04T00:52:11.466Z,1543884731.466 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T00:52:11.466Z,1543884731.466 [Default:CheckIn:C.Wait] Stopped 2018-12-04T00:52:11.466Z,1543884731.466 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T00:52:11.466Z,1543884731.466 [Default:CheckIn:D] Running Loop=1 2018-12-04T00:52:11.857Z,1543884731.857 [Default:CheckIn:D] Stopped 2018-12-04T00:52:11.857Z,1543884731.857 [Default:CheckIn:E] Running Loop=1 2018-12-04T00:52:12.257Z,1543884732.257 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 217.330583 min 2018-12-04T00:52:12.257Z,1543884732.257 [Default:CheckIn:E] Stopped 2018-12-04T00:52:12.258Z,1543884732.258 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T00:52:12.258Z,1543884732.258 [Default:CheckIn] Stopped 2018-12-04T00:52:12.258Z,1543884732.258 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T00:52:12.258Z,1543884732.258 [Default:CheckIn](INFO): Running loop #22 2018-12-04T00:52:12.258Z,1543884732.258 [Default:CheckIn] Running Loop=22 2018-12-04T00:52:12.258Z,1543884732.258 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T00:52:12.258Z,1543884732.258 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T00:52:13.034Z,1543884733.034 [NAL9602](INFO): Powering up 2018-12-04T00:52:24.232Z,1543884744.232 [NAL9602](INFO): NAL9602 initialized 2018-12-04T00:52:41.821Z,1543884761.821 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:52:41.821Z,1543884761.821 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-04T00:52:41.822Z,1543884761.822 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:52:41.824Z,1543884761.824 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:52:41.824Z,1543884761.824 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-04T00:52:41.824Z,1543884761.824 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:52:41.838Z,1543884761.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:52:41.838Z,1543884761.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:52:42.238Z,1543884762.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:52:42.238Z,1543884762.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-04T00:52:42.239Z,1543884762.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:52:42.239Z,1543884762.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-04T00:52:42.629Z,1543884762.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:52:42.630Z,1543884762.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:52:42.630Z,1543884762.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:52:42.631Z,1543884762.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:52:42.631Z,1543884762.631 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:52:42.632Z,1543884762.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:54:42.807Z,1543884882.807 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:54:42.807Z,1543884882.807 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-04T00:54:42.807Z,1543884882.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:54:42.809Z,1543884882.809 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:54:42.809Z,1543884882.809 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-04T00:54:42.809Z,1543884882.809 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:54:42.823Z,1543884882.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:54:42.823Z,1543884882.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:54:43.220Z,1543884883.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:54:43.220Z,1543884883.220 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-04T00:54:43.221Z,1543884883.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:54:43.221Z,1543884883.221 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-04T00:54:43.610Z,1543884883.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:54:43.611Z,1543884883.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:54:43.611Z,1543884883.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:54:43.612Z,1543884883.612 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:54:43.612Z,1543884883.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:54:43.612Z,1543884883.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:56:43.666Z,1543885003.666 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:56:43.666Z,1543885003.666 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-04T00:56:43.667Z,1543885003.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:56:43.669Z,1543885003.669 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:56:43.669Z,1543885003.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-04T00:56:43.669Z,1543885003.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:56:43.682Z,1543885003.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:56:43.682Z,1543885003.682 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:56:44.072Z,1543885004.072 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:56:44.072Z,1543885004.072 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-04T00:56:44.073Z,1543885004.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:56:44.073Z,1543885004.073 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-04T00:56:44.470Z,1543885004.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:56:44.471Z,1543885004.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:56:44.471Z,1543885004.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:56:44.471Z,1543885004.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:56:44.472Z,1543885004.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:56:44.472Z,1543885004.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:57:13.645Z,1543885033.645 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T00:52:12.3Z 2018-12-04T00:57:13.645Z,1543885033.645 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T00:57:13.645Z,1543885033.645 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T00:57:18.534Z,1543885038.534 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0063.lzma 2018-12-04T00:57:19.336Z,1543885039.336 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0063.lzma.bak 2018-12-04T00:57:19.337Z,1543885039.337 [DataOverHttps](INFO): SBD MOMSN=8962238 2018-12-04T00:57:28.553Z,1543885048.553 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T00:57:28.632Z,1543885048.632 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0064.lzma 2018-12-04T00:57:29.409Z,1543885049.409 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0064.lzma.bak 2018-12-04T00:57:29.409Z,1543885049.409 [DataOverHttps](INFO): SBD MOMSN=8962242 2018-12-04T00:57:30.698Z,1543885050.698 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T00:57:30.698Z,1543885050.698 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T00:57:30.698Z,1543885050.698 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T00:57:58.671Z,1543885078.671 [NAL9602](INFO): Powering down 2018-12-04T00:58:44.550Z,1543885124.550 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:58:44.550Z,1543885124.550 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-04T00:58:44.550Z,1543885124.550 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T00:58:44.552Z,1543885124.552 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T00:58:44.553Z,1543885124.553 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-04T00:58:44.553Z,1543885124.553 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T00:58:44.566Z,1543885124.566 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T00:58:44.566Z,1543885124.566 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T00:58:44.690Z,1543885124.690 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T00:58:44.690Z,1543885124.690 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-04T00:58:44.691Z,1543885124.691 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T00:58:44.691Z,1543885124.691 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-04T00:58:45.006Z,1543885125.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T00:58:45.007Z,1543885125.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:58:45.007Z,1543885125.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T00:58:45.007Z,1543885125.007 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T00:58:45.008Z,1543885125.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T00:58:45.008Z,1543885125.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:00:45.072Z,1543885245.072 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:00:45.072Z,1543885245.072 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-04T01:00:45.072Z,1543885245.072 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:00:45.074Z,1543885245.074 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:00:45.074Z,1543885245.074 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-04T01:00:45.075Z,1543885245.075 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:00:45.104Z,1543885245.104 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:00:45.104Z,1543885245.104 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:00:45.518Z,1543885245.518 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:00:45.518Z,1543885245.518 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-04T01:00:45.519Z,1543885245.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:00:45.519Z,1543885245.519 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-04T01:00:45.882Z,1543885245.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:00:45.882Z,1543885245.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:00:45.883Z,1543885245.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:00:45.883Z,1543885245.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:00:45.883Z,1543885245.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:00:45.884Z,1543885245.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:02:31.126Z,1543885351.126 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T01:02:31.126Z,1543885351.126 [Default:CheckIn:C.Wait] Stopped 2018-12-04T01:02:31.126Z,1543885351.126 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T01:02:31.126Z,1543885351.126 [Default:CheckIn:D] Running Loop=1 2018-12-04T01:02:31.526Z,1543885351.526 [Default:CheckIn:D] Stopped 2018-12-04T01:02:31.526Z,1543885351.526 [Default:CheckIn:E] Running Loop=1 2018-12-04T01:02:31.920Z,1543885351.920 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.658398 min 2018-12-04T01:02:31.920Z,1543885351.920 [Default:CheckIn:E] Stopped 2018-12-04T01:02:31.921Z,1543885351.921 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T01:02:31.921Z,1543885351.921 [Default:CheckIn] Stopped 2018-12-04T01:02:31.921Z,1543885351.921 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T01:02:31.921Z,1543885351.921 [Default:CheckIn](INFO): Running loop #23 2018-12-04T01:02:31.921Z,1543885351.921 [Default:CheckIn] Running Loop=23 2018-12-04T01:02:31.921Z,1543885351.921 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T01:02:31.921Z,1543885351.921 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T01:02:32.691Z,1543885352.691 [NAL9602](INFO): Powering up 2018-12-04T01:02:43.492Z,1543885363.492 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:02:44.289Z,1543885364.289 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T01:02:44.289Z,1543885364.289 [NAL9602] Data Fault, FailCount= 5 2018-12-04T01:02:44.290Z,1543885364.290 [NAL9602](ERROR): Data Fault 2018-12-04T01:02:44.336Z,1543885364.336 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T01:02:44.336Z,1543885364.336 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T01:02:44.691Z,1543885364.691 [NAL9602](INFO): Powering down 2018-12-04T01:02:44.750Z,1543885364.750 [CBIT](INFO): Critical error at 20181204T010244 2018-12-04T01:02:45.909Z,1543885365.909 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:02:45.909Z,1543885365.909 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-04T01:02:45.909Z,1543885365.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:02:45.912Z,1543885365.912 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:02:45.912Z,1543885365.912 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-04T01:02:45.912Z,1543885365.912 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:02:45.946Z,1543885365.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:02:45.946Z,1543885365.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:02:46.322Z,1543885366.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:02:46.322Z,1543885366.322 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-04T01:02:46.335Z,1543885366.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:02:46.335Z,1543885366.335 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-04T01:02:46.714Z,1543885366.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:02:46.714Z,1543885366.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:02:46.715Z,1543885366.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:02:46.715Z,1543885366.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:02:46.715Z,1543885366.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:02:46.716Z,1543885366.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:04:44.689Z,1543885484.689 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T01:04:44.689Z,1543885484.689 [NAL9602] No Fault, FailCount= 5 2018-12-04T01:04:45.041Z,1543885485.041 [NAL9602](INFO): Powering up NAL9602 2018-12-04T01:04:47.074Z,1543885487.074 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:04:47.074Z,1543885487.074 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-04T01:04:47.074Z,1543885487.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:04:47.076Z,1543885487.076 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:04:47.076Z,1543885487.076 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-04T01:04:47.077Z,1543885487.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:04:47.090Z,1543885487.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:04:47.090Z,1543885487.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:04:47.482Z,1543885487.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:04:47.482Z,1543885487.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-04T01:04:47.483Z,1543885487.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:04:47.483Z,1543885487.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-04T01:04:47.874Z,1543885487.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:04:47.874Z,1543885487.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:04:47.875Z,1543885487.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:04:47.875Z,1543885487.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:04:47.875Z,1543885487.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:04:47.876Z,1543885487.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:04:56.243Z,1543885496.243 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:06:00.461Z,1543885560.461 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T01:06:00.461Z,1543885560.461 [DropWeight] No Fault, FailCount= 1 2018-12-04T01:06:48.041Z,1543885608.041 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:06:48.042Z,1543885608.042 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-04T01:06:48.042Z,1543885608.042 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:06:48.044Z,1543885608.044 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:06:48.044Z,1543885608.044 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-04T01:06:48.044Z,1543885608.044 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:06:48.058Z,1543885608.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:06:48.058Z,1543885608.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:06:48.458Z,1543885608.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:06:48.458Z,1543885608.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-04T01:06:48.459Z,1543885608.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:06:48.459Z,1543885608.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-04T01:06:48.837Z,1543885608.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:06:48.838Z,1543885608.838 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:06:48.838Z,1543885608.838 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:06:48.839Z,1543885608.839 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:06:48.839Z,1543885608.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:06:48.840Z,1543885608.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:07:32.719Z,1543885652.719 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T01:02:31.9Z 2018-12-04T01:07:32.719Z,1543885652.719 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T01:07:32.719Z,1543885652.719 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T01:07:37.641Z,1543885657.641 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0066.lzma 2018-12-04T01:07:38.441Z,1543885658.441 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0066.lzma.bak 2018-12-04T01:07:38.441Z,1543885658.441 [DataOverHttps](INFO): SBD MOMSN=8962263 2018-12-04T01:07:47.790Z,1543885667.790 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0067.lzma 2018-12-04T01:07:48.564Z,1543885668.564 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0067.lzma.bak 2018-12-04T01:07:48.565Z,1543885668.565 [DataOverHttps](INFO): SBD MOMSN=8962266 2018-12-04T01:07:49.842Z,1543885669.842 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T01:07:49.842Z,1543885669.842 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T01:07:49.842Z,1543885669.842 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T01:08:48.889Z,1543885728.889 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:08:48.889Z,1543885728.889 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-04T01:08:48.889Z,1543885728.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:08:48.891Z,1543885728.891 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:08:48.891Z,1543885728.891 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-04T01:08:48.891Z,1543885728.891 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:08:48.921Z,1543885728.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:08:48.922Z,1543885728.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:08:49.310Z,1543885729.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:08:49.312Z,1543885729.312 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-04T01:08:49.313Z,1543885729.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:08:49.313Z,1543885729.313 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-04T01:08:49.698Z,1543885729.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:08:49.698Z,1543885729.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:08:49.699Z,1543885729.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:08:49.713Z,1543885729.713 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:08:49.713Z,1543885729.713 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:08:49.714Z,1543885729.714 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:09:59.616Z,1543885799.616 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T01:10:30.351Z,1543885830.351 [NAL9602](INFO): Powering down 2018-12-04T01:10:49.743Z,1543885849.743 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:10:49.743Z,1543885849.743 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-04T01:10:49.743Z,1543885849.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:10:49.745Z,1543885849.745 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:10:49.745Z,1543885849.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-04T01:10:49.745Z,1543885849.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:10:49.759Z,1543885849.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:10:49.759Z,1543885849.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:10:50.108Z,1543885850.108 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:10:50.108Z,1543885850.108 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-04T01:10:50.109Z,1543885850.109 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:10:50.109Z,1543885850.109 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-04T01:10:50.496Z,1543885850.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:10:50.497Z,1543885850.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:10:50.497Z,1543885850.497 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:10:50.498Z,1543885850.498 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:10:50.498Z,1543885850.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:10:50.499Z,1543885850.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:12:50.128Z,1543885970.128 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T01:12:50.129Z,1543885970.129 [Default:CheckIn:C.Wait] Stopped 2018-12-04T01:12:50.129Z,1543885970.129 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T01:12:50.129Z,1543885970.129 [Default:CheckIn:D] Running Loop=1 2018-12-04T01:12:50.516Z,1543885970.516 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:12:50.516Z,1543885970.516 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-04T01:12:50.517Z,1543885970.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:12:50.519Z,1543885970.519 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:12:50.519Z,1543885970.519 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-04T01:12:50.519Z,1543885970.519 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:12:50.521Z,1543885970.521 [Default:CheckIn:D] Stopped 2018-12-04T01:12:50.522Z,1543885970.522 [Default:CheckIn:E] Running Loop=1 2018-12-04T01:12:50.532Z,1543885970.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:12:50.532Z,1543885970.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:12:50.925Z,1543885970.925 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 237.974984 min 2018-12-04T01:12:50.925Z,1543885970.925 [Default:CheckIn:E] Stopped 2018-12-04T01:12:50.925Z,1543885970.925 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T01:12:50.925Z,1543885970.925 [Default:CheckIn] Stopped 2018-12-04T01:12:50.926Z,1543885970.926 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T01:12:50.926Z,1543885970.926 [Default:CheckIn](INFO): Running loop #24 2018-12-04T01:12:50.926Z,1543885970.926 [Default:CheckIn] Running Loop=24 2018-12-04T01:12:50.926Z,1543885970.926 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T01:12:50.926Z,1543885970.926 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T01:12:50.937Z,1543885970.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:12:50.937Z,1543885970.937 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-04T01:12:50.938Z,1543885970.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:12:50.938Z,1543885970.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-04T01:12:51.326Z,1543885971.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:12:51.327Z,1543885971.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:12:51.327Z,1543885971.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:12:51.327Z,1543885971.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:12:51.328Z,1543885971.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:12:51.328Z,1543885971.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:12:51.691Z,1543885971.691 [NAL9602](INFO): Powering up 2018-12-04T01:13:02.492Z,1543885982.492 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:13:34.448Z,1543886014.448 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T01:13:34.522Z,1543886014.522 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T01:13:34.522Z,1543886014.522 [NAL9602] Data Fault, FailCount= 1 2018-12-04T01:13:34.522Z,1543886014.522 [NAL9602](ERROR): Data Fault 2018-12-04T01:13:34.561Z,1543886014.561 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T01:13:34.848Z,1543886014.848 [NAL9602](INFO): Powering down 2018-12-04T01:13:35.703Z,1543886015.703 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T01:13:35.703Z,1543886015.703 [NAL9602] No Fault, FailCount= 1 2018-12-04T01:14:05.220Z,1543886045.220 [NAL9602](INFO): Powering up NAL9602 2018-12-04T01:14:16.420Z,1543886056.420 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:14:51.394Z,1543886091.394 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:14:51.394Z,1543886091.394 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-04T01:14:51.394Z,1543886091.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:14:51.397Z,1543886091.397 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:14:51.397Z,1543886091.397 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-04T01:14:51.397Z,1543886091.397 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:14:51.459Z,1543886091.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:14:51.459Z,1543886091.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:14:51.836Z,1543886091.836 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:14:51.836Z,1543886091.836 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-04T01:14:51.836Z,1543886091.836 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:14:51.836Z,1543886091.836 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-04T01:14:52.199Z,1543886092.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:14:52.199Z,1543886092.199 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:14:52.199Z,1543886092.199 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:14:52.200Z,1543886092.200 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:14:52.200Z,1543886092.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:14:52.201Z,1543886092.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:16:52.226Z,1543886212.226 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:16:52.227Z,1543886212.227 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-04T01:16:52.227Z,1543886212.227 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:16:52.229Z,1543886212.229 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:16:52.229Z,1543886212.229 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-04T01:16:52.229Z,1543886212.229 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:16:52.243Z,1543886212.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:16:52.243Z,1543886212.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:16:52.631Z,1543886212.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:16:52.632Z,1543886212.632 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-04T01:16:52.632Z,1543886212.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:16:52.632Z,1543886212.632 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-04T01:16:53.018Z,1543886213.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:16:53.018Z,1543886213.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:16:53.019Z,1543886213.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:16:53.019Z,1543886213.019 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:16:53.019Z,1543886213.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:16:53.020Z,1543886213.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:17:52.144Z,1543886272.144 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T01:12:50.9Z 2018-12-04T01:17:52.144Z,1543886272.144 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T01:17:52.144Z,1543886272.144 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T01:17:57.061Z,1543886277.061 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0069.lzma 2018-12-04T01:17:57.853Z,1543886277.853 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0069.lzma.bak 2018-12-04T01:17:57.853Z,1543886277.853 [DataOverHttps](INFO): SBD MOMSN=8962290 2018-12-04T01:18:07.227Z,1543886287.227 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T01:18:07.287Z,1543886287.287 [DataOverHttps](INFO): Sending 327 bytes from file Logs/20181203T211451/Express0070.lzma 2018-12-04T01:18:08.085Z,1543886288.085 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0070.lzma.bak 2018-12-04T01:18:08.085Z,1543886288.085 [DataOverHttps](INFO): SBD MOMSN=8962292 2018-12-04T01:18:09.426Z,1543886289.426 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T01:18:09.426Z,1543886289.426 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T01:18:09.426Z,1543886289.426 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T01:18:37.488Z,1543886317.488 [NAL9602](INFO): Powering down 2018-12-04T01:18:53.070Z,1543886333.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:18:53.070Z,1543886333.070 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-04T01:18:53.071Z,1543886333.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:18:53.073Z,1543886333.073 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:18:53.073Z,1543886333.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-04T01:18:53.073Z,1543886333.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:18:53.087Z,1543886333.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:18:53.087Z,1543886333.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:18:53.491Z,1543886333.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:18:53.491Z,1543886333.491 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-04T01:18:53.492Z,1543886333.492 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:18:53.492Z,1543886333.492 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-04T01:18:53.878Z,1543886333.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:18:53.879Z,1543886333.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:18:53.879Z,1543886333.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:18:53.879Z,1543886333.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:18:53.880Z,1543886333.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:18:53.880Z,1543886333.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:20:53.962Z,1543886453.962 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:20:53.962Z,1543886453.962 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-04T01:20:53.962Z,1543886453.962 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:20:53.964Z,1543886453.964 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:20:53.965Z,1543886453.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-04T01:20:53.965Z,1543886453.965 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:20:53.978Z,1543886453.978 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:20:53.978Z,1543886453.978 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:20:54.367Z,1543886454.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:20:54.367Z,1543886454.367 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-04T01:20:54.368Z,1543886454.368 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:20:54.368Z,1543886454.368 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-04T01:20:54.761Z,1543886454.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:20:54.762Z,1543886454.762 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:20:54.762Z,1543886454.762 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:20:54.763Z,1543886454.763 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:20:54.763Z,1543886454.763 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:20:54.763Z,1543886454.763 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:22:54.826Z,1543886574.826 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:22:54.826Z,1543886574.826 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-04T01:22:54.827Z,1543886574.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:22:54.829Z,1543886574.829 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:22:54.829Z,1543886574.829 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-04T01:22:54.829Z,1543886574.829 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:22:54.863Z,1543886574.863 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:22:54.863Z,1543886574.863 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:22:55.180Z,1543886575.180 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:22:55.180Z,1543886575.180 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-04T01:22:55.181Z,1543886575.181 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:22:55.181Z,1543886575.181 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-04T01:22:55.570Z,1543886575.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:22:55.571Z,1543886575.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:22:55.571Z,1543886575.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:22:55.572Z,1543886575.572 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:22:55.572Z,1543886575.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:22:55.572Z,1543886575.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:23:09.577Z,1543886589.577 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T01:23:09.578Z,1543886589.578 [Default:CheckIn:C.Wait] Stopped 2018-12-04T01:23:09.578Z,1543886589.578 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T01:23:09.578Z,1543886589.578 [Default:CheckIn:D] Running Loop=1 2018-12-04T01:23:09.972Z,1543886589.972 [Default:CheckIn:D] Stopped 2018-12-04T01:23:09.972Z,1543886589.972 [Default:CheckIn:E] Running Loop=1 2018-12-04T01:23:10.369Z,1543886590.369 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 248.299170 min 2018-12-04T01:23:10.370Z,1543886590.370 [Default:CheckIn:E] Stopped 2018-12-04T01:23:10.370Z,1543886590.370 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T01:23:10.370Z,1543886590.370 [Default:CheckIn] Stopped 2018-12-04T01:23:10.370Z,1543886590.370 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T01:23:10.370Z,1543886590.370 [Default:CheckIn](INFO): Running loop #25 2018-12-04T01:23:10.370Z,1543886590.370 [Default:CheckIn] Running Loop=25 2018-12-04T01:23:10.371Z,1543886590.371 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T01:23:10.371Z,1543886590.371 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T01:23:11.141Z,1543886591.141 [NAL9602](INFO): Powering up 2018-12-04T01:23:22.344Z,1543886602.344 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:23:23.144Z,1543886603.144 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T01:23:23.144Z,1543886603.144 [NAL9602] Data Fault, FailCount= 2 2018-12-04T01:23:23.144Z,1543886603.144 [NAL9602](ERROR): Data Fault 2018-12-04T01:23:23.206Z,1543886603.206 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T01:23:23.544Z,1543886603.544 [NAL9602](INFO): Powering down 2018-12-04T01:23:24.384Z,1543886604.384 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T01:23:24.384Z,1543886604.384 [NAL9602] No Fault, FailCount= 2 2018-12-04T01:23:53.563Z,1543886633.563 [NAL9602](INFO): Powering up NAL9602 2018-12-04T01:24:05.563Z,1543886645.563 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:24:55.589Z,1543886695.589 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:24:55.590Z,1543886695.590 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-04T01:24:55.590Z,1543886695.590 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:24:55.592Z,1543886695.592 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:24:55.592Z,1543886695.592 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-04T01:24:55.592Z,1543886695.592 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:24:55.605Z,1543886695.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:24:55.605Z,1543886695.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:24:56.015Z,1543886696.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:24:56.015Z,1543886696.015 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-04T01:24:56.015Z,1543886696.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:24:56.015Z,1543886696.015 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-04T01:24:56.387Z,1543886696.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:24:56.387Z,1543886696.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:24:56.387Z,1543886696.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:24:56.388Z,1543886696.388 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:24:56.388Z,1543886696.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:24:56.389Z,1543886696.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:26:56.502Z,1543886816.502 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:26:56.502Z,1543886816.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-04T01:26:56.502Z,1543886816.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:26:56.504Z,1543886816.504 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:26:56.505Z,1543886816.505 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-04T01:26:56.505Z,1543886816.505 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:26:56.525Z,1543886816.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:26:56.525Z,1543886816.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:26:56.915Z,1543886816.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:26:56.915Z,1543886816.915 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-04T01:26:56.916Z,1543886816.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:26:56.916Z,1543886816.916 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-04T01:26:57.299Z,1543886817.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:26:57.300Z,1543886817.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:26:57.300Z,1543886817.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:26:57.300Z,1543886817.300 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:26:57.301Z,1543886817.301 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:26:57.301Z,1543886817.301 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:28:07.398Z,1543886887.398 [CBIT](IMPORTANT): Beginning ground fault scan 2018-12-04T01:28:11.694Z,1543886891.694 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T01:23:10.4Z 2018-12-04T01:28:11.694Z,1543886891.694 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T01:28:11.695Z,1543886891.695 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T01:28:17.001Z,1543886897.001 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0072.lzma 2018-12-04T01:28:17.801Z,1543886897.801 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0072.lzma.bak 2018-12-04T01:28:17.801Z,1543886897.801 [DataOverHttps](INFO): SBD MOMSN=8962314 2018-12-04T01:28:27.798Z,1543886907.798 [DataOverHttps](INFO): Sending 331 bytes from file Logs/20181203T211451/Express0073.lzma 2018-12-04T01:28:28.597Z,1543886908.597 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0073.lzma.bak 2018-12-04T01:28:28.597Z,1543886908.597 [DataOverHttps](INFO): SBD MOMSN=8962316 2018-12-04T01:28:29.892Z,1543886909.892 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T01:28:29.892Z,1543886909.892 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T01:28:29.892Z,1543886909.892 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T01:28:30.056Z,1543886910.056 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.144509 CHAN A1 (24V): 0.001277 CHAN A2 (12V): -0.005685 CHAN A3 (5V): -0.003108 CHAN B0 (3.3V): -0.001164 CHAN B1 (3.15aV): -0.001122 CHAN B2 (3.15bV): -0.001190 CHAN B3 (GND): -0.000266 OPEN: -0.001434 Full Scale Calc: 4.765 mA, -1.589 mA 2018-12-04T01:28:57.359Z,1543886937.359 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:28:57.359Z,1543886937.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-04T01:28:57.359Z,1543886937.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:28:57.361Z,1543886937.361 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:28:57.361Z,1543886937.361 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-04T01:28:57.362Z,1543886937.362 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:28:57.375Z,1543886937.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:28:57.376Z,1543886937.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:28:57.782Z,1543886937.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:28:57.782Z,1543886937.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-04T01:28:57.783Z,1543886937.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:28:57.783Z,1543886937.783 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-04T01:28:58.157Z,1543886938.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:28:58.158Z,1543886938.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:28:58.158Z,1543886938.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:28:58.158Z,1543886938.158 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:28:58.159Z,1543886938.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:28:58.159Z,1543886938.159 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:29:08.908Z,1543886948.908 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T01:29:39.707Z,1543886979.707 [NAL9602](INFO): Powering down 2018-12-04T01:30:58.566Z,1543887058.566 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:30:58.567Z,1543887058.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-04T01:30:58.567Z,1543887058.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:30:58.569Z,1543887058.569 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:30:58.569Z,1543887058.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-04T01:30:58.569Z,1543887058.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:30:58.636Z,1543887058.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:30:58.636Z,1543887058.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:30:58.974Z,1543887058.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:30:58.974Z,1543887058.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-04T01:30:58.975Z,1543887058.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:30:58.975Z,1543887058.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-04T01:30:59.338Z,1543887059.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:30:59.338Z,1543887059.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:30:59.339Z,1543887059.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:30:59.339Z,1543887059.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:30:59.339Z,1543887059.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:30:59.340Z,1543887059.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:32:59.509Z,1543887179.509 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:32:59.509Z,1543887179.509 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-04T01:32:59.509Z,1543887179.509 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:32:59.512Z,1543887179.512 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:32:59.512Z,1543887179.512 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-04T01:32:59.512Z,1543887179.512 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:32:59.525Z,1543887179.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:32:59.525Z,1543887179.525 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:32:59.926Z,1543887179.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:32:59.926Z,1543887179.926 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-04T01:32:59.926Z,1543887179.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:32:59.926Z,1543887179.926 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-04T01:33:00.309Z,1543887180.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:33:00.310Z,1543887180.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:33:00.310Z,1543887180.310 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:33:00.310Z,1543887180.310 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:33:00.311Z,1543887180.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:33:00.311Z,1543887180.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:33:30.381Z,1543887210.381 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T01:33:30.382Z,1543887210.382 [Default:CheckIn:C.Wait] Stopped 2018-12-04T01:33:30.382Z,1543887210.382 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T01:33:30.382Z,1543887210.382 [Default:CheckIn:D] Running Loop=1 2018-12-04T01:33:30.786Z,1543887210.786 [Default:CheckIn:D] Stopped 2018-12-04T01:33:30.786Z,1543887210.786 [Default:CheckIn:E] Running Loop=1 2018-12-04T01:33:31.179Z,1543887211.179 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 258.646061 min 2018-12-04T01:33:31.180Z,1543887211.180 [Default:CheckIn:E] Stopped 2018-12-04T01:33:31.180Z,1543887211.180 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T01:33:31.180Z,1543887211.180 [Default:CheckIn] Stopped 2018-12-04T01:33:31.180Z,1543887211.180 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T01:33:31.180Z,1543887211.180 [Default:CheckIn](INFO): Running loop #26 2018-12-04T01:33:31.180Z,1543887211.180 [Default:CheckIn] Running Loop=26 2018-12-04T01:33:31.180Z,1543887211.180 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T01:33:31.180Z,1543887211.180 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T01:33:31.955Z,1543887211.955 [NAL9602](INFO): Powering up 2018-12-04T01:33:42.756Z,1543887222.756 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:34:14.744Z,1543887254.744 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T01:34:14.826Z,1543887254.826 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T01:34:14.826Z,1543887254.826 [NAL9602] Data Fault, FailCount= 3 2018-12-04T01:34:14.826Z,1543887254.826 [NAL9602](ERROR): Data Fault 2018-12-04T01:34:14.945Z,1543887254.945 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T01:34:15.137Z,1543887255.137 [NAL9602](INFO): Powering down 2018-12-04T01:34:16.006Z,1543887256.006 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T01:34:16.006Z,1543887256.006 [NAL9602] No Fault, FailCount= 3 2018-12-04T01:34:45.520Z,1543887285.520 [NAL9602](INFO): Powering up NAL9602 2018-12-04T01:34:56.720Z,1543887296.720 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:35:00.230Z,1543887300.230 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T01:35:00.230Z,1543887300.230 [NAL9602] Data Fault, FailCount= 4 2018-12-04T01:35:00.230Z,1543887300.230 [NAL9602](ERROR): Data Fault 2018-12-04T01:35:00.301Z,1543887300.301 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T01:35:00.352Z,1543887300.352 [NAL9602](INFO): Powering down 2018-12-04T01:35:00.378Z,1543887300.378 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:35:00.378Z,1543887300.378 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-04T01:35:00.378Z,1543887300.378 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:35:00.380Z,1543887300.380 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:35:00.380Z,1543887300.380 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-04T01:35:00.380Z,1543887300.380 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:35:00.429Z,1543887300.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:35:00.429Z,1543887300.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:35:00.764Z,1543887300.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:35:00.764Z,1543887300.764 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-04T01:35:00.765Z,1543887300.765 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:35:00.765Z,1543887300.765 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-04T01:35:01.140Z,1543887301.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:35:01.141Z,1543887301.141 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:35:01.141Z,1543887301.141 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:35:01.141Z,1543887301.141 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:35:01.142Z,1543887301.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:35:01.150Z,1543887301.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:35:01.172Z,1543887301.172 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T01:35:01.172Z,1543887301.172 [NAL9602] No Fault, FailCount= 4 2018-12-04T01:35:30.724Z,1543887330.724 [NAL9602](INFO): Powering up NAL9602 2018-12-04T01:35:41.792Z,1543887341.792 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:36:01.794Z,1543887361.794 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T01:36:01.794Z,1543887361.794 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T01:36:01.794Z,1543887361.794 [DropWeight](ERROR): Hardware Fault 2018-12-04T01:36:01.828Z,1543887361.828 [CBIT](INFO): Critical error at 20181204T013601 2018-12-04T01:36:01.831Z,1543887361.831 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T01:36:01.831Z,1543887361.831 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T01:36:02.315Z,1543887362.315 [CBIT](INFO): Critical error at 20181204T013601 2018-12-04T01:37:01.491Z,1543887421.491 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:37:01.491Z,1543887421.491 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-04T01:37:01.491Z,1543887421.491 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:37:01.493Z,1543887421.493 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:37:01.493Z,1543887421.493 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-04T01:37:01.493Z,1543887421.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:37:01.508Z,1543887421.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:37:01.508Z,1543887421.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:37:01.910Z,1543887421.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:37:01.910Z,1543887421.910 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-04T01:37:01.911Z,1543887421.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:37:01.911Z,1543887421.911 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-04T01:37:02.297Z,1543887422.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:37:02.298Z,1543887422.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:37:02.298Z,1543887422.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:37:02.299Z,1543887422.299 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:37:02.300Z,1543887422.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:37:02.300Z,1543887422.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:38:31.633Z,1543887511.633 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T01:33:31.2Z 2018-12-04T01:38:31.633Z,1543887511.633 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T01:38:31.633Z,1543887511.633 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T01:38:32.508Z,1543887512.508 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0075.lzma 2018-12-04T01:38:33.009Z,1543887513.009 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0075.lzma.bak 2018-12-04T01:38:33.009Z,1543887513.009 [DataOverHttps](INFO): SBD MOMSN=8962341 2018-12-04T01:38:42.862Z,1543887522.862 [DataOverHttps](INFO): Sending 506 bytes from file Logs/20181203T211451/Express0076.lzma 2018-12-04T01:38:43.661Z,1543887523.661 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0076.lzma.bak 2018-12-04T01:38:43.661Z,1543887523.661 [DataOverHttps](INFO): SBD MOMSN=8962345 2018-12-04T01:38:45.002Z,1543887525.002 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T01:38:45.002Z,1543887525.002 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T01:38:45.002Z,1543887525.002 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T01:38:48.207Z,1543887528.207 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T01:39:02.301Z,1543887542.301 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:39:02.301Z,1543887542.301 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-04T01:39:02.301Z,1543887542.301 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:39:02.304Z,1543887542.304 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:39:02.304Z,1543887542.304 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-04T01:39:02.305Z,1543887542.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:39:02.318Z,1543887542.318 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:39:02.318Z,1543887542.318 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:39:02.715Z,1543887542.715 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:39:02.715Z,1543887542.715 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-04T01:39:02.716Z,1543887542.716 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:39:02.716Z,1543887542.716 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-04T01:39:03.102Z,1543887543.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:39:03.103Z,1543887543.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:39:03.103Z,1543887543.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:39:03.104Z,1543887543.104 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:39:03.104Z,1543887543.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:39:03.104Z,1543887543.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:39:18.671Z,1543887558.671 [NAL9602](INFO): Powering down 2018-12-04T01:40:37.975Z,1543887637.975 [BPC1](FAULT): Battery stick #39 (s/n: 01F7) reported OVER_TEMP_ALARM. Status code: 0x1717. 2018-12-04T01:40:37.976Z,1543887637.976 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 5. 2018-12-04T01:41:03.176Z,1543887663.176 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:41:03.177Z,1543887663.177 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-04T01:41:03.177Z,1543887663.177 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:41:03.179Z,1543887663.179 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:41:03.179Z,1543887663.179 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-04T01:41:03.179Z,1543887663.179 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:41:03.193Z,1543887663.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:41:03.193Z,1543887663.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:41:03.594Z,1543887663.594 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:41:03.594Z,1543887663.594 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-04T01:41:03.595Z,1543887663.595 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:41:03.595Z,1543887663.595 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-04T01:41:03.977Z,1543887663.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:41:03.977Z,1543887663.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:41:03.977Z,1543887663.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:41:03.978Z,1543887663.978 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:41:03.978Z,1543887663.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:41:03.979Z,1543887663.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:43:04.195Z,1543887784.195 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:43:04.195Z,1543887784.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-04T01:43:04.195Z,1543887784.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:43:04.197Z,1543887784.197 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:43:04.197Z,1543887784.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-04T01:43:04.197Z,1543887784.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:43:04.211Z,1543887784.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:43:04.211Z,1543887784.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:43:04.610Z,1543887784.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:43:04.610Z,1543887784.610 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-04T01:43:04.611Z,1543887784.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:43:04.611Z,1543887784.611 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-04T01:43:05.006Z,1543887785.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:43:05.006Z,1543887785.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:43:05.007Z,1543887785.007 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:43:05.007Z,1543887785.007 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:43:05.007Z,1543887785.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:43:05.008Z,1543887785.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:43:45.373Z,1543887825.373 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T01:43:45.373Z,1543887825.373 [Default:CheckIn:C.Wait] Stopped 2018-12-04T01:43:45.373Z,1543887825.373 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T01:43:45.373Z,1543887825.373 [Default:CheckIn:D] Running Loop=1 2018-12-04T01:43:45.768Z,1543887825.768 [Default:CheckIn:D] Stopped 2018-12-04T01:43:45.768Z,1543887825.768 [Default:CheckIn:E] Running Loop=1 2018-12-04T01:43:46.169Z,1543887826.169 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 268.895752 min 2018-12-04T01:43:46.169Z,1543887826.169 [Default:CheckIn:E] Stopped 2018-12-04T01:43:46.169Z,1543887826.169 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T01:43:46.169Z,1543887826.169 [Default:CheckIn] Stopped 2018-12-04T01:43:46.170Z,1543887826.170 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T01:43:46.170Z,1543887826.170 [Default:CheckIn](INFO): Running loop #27 2018-12-04T01:43:46.170Z,1543887826.170 [Default:CheckIn] Running Loop=27 2018-12-04T01:43:46.170Z,1543887826.170 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T01:43:46.170Z,1543887826.170 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T01:43:46.939Z,1543887826.939 [NAL9602](INFO): Powering up 2018-12-04T01:43:58.155Z,1543887838.155 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:44:30.115Z,1543887870.115 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T01:44:30.190Z,1543887870.190 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T01:44:30.190Z,1543887870.190 [NAL9602] Data Fault, FailCount= 5 2018-12-04T01:44:30.190Z,1543887870.190 [NAL9602](ERROR): Data Fault 2018-12-04T01:44:30.256Z,1543887870.256 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T01:44:30.257Z,1543887870.257 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T01:44:30.523Z,1543887870.523 [NAL9602](INFO): Powering down 2018-12-04T01:44:30.570Z,1543887870.570 [CBIT](INFO): Critical error at 20181204T014430 2018-12-04T01:45:05.303Z,1543887905.303 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:45:05.303Z,1543887905.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-04T01:45:05.303Z,1543887905.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:45:05.305Z,1543887905.305 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:45:05.305Z,1543887905.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-04T01:45:05.305Z,1543887905.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:45:05.344Z,1543887905.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:45:05.345Z,1543887905.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:45:05.719Z,1543887905.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:45:05.719Z,1543887905.719 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-04T01:45:05.720Z,1543887905.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:45:05.720Z,1543887905.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-04T01:45:06.104Z,1543887906.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:45:06.104Z,1543887906.104 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:45:06.104Z,1543887906.104 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:45:06.105Z,1543887906.105 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:45:06.105Z,1543887906.105 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:45:06.106Z,1543887906.106 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:46:30.282Z,1543887990.282 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T01:46:30.282Z,1543887990.282 [NAL9602] No Fault, FailCount= 5 2018-12-04T01:46:30.643Z,1543887990.643 [NAL9602](INFO): Powering up NAL9602 2018-12-04T01:46:41.844Z,1543888001.844 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:46:42.644Z,1543888002.644 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T01:46:42.644Z,1543888002.644 [NAL9602] Data Fault, FailCount= 1 2018-12-04T01:46:42.644Z,1543888002.644 [NAL9602](ERROR): Data Fault 2018-12-04T01:46:42.712Z,1543888002.712 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T01:46:43.043Z,1543888003.043 [NAL9602](INFO): Powering down 2018-12-04T01:46:43.885Z,1543888003.885 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T01:46:43.885Z,1543888003.885 [NAL9602] No Fault, FailCount= 1 2018-12-04T01:47:06.222Z,1543888026.222 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:47:06.222Z,1543888026.222 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-04T01:47:06.222Z,1543888026.222 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:47:06.224Z,1543888026.224 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:47:06.224Z,1543888026.224 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-04T01:47:06.224Z,1543888026.224 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:47:06.237Z,1543888026.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:47:06.238Z,1543888026.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:47:06.647Z,1543888026.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:47:06.647Z,1543888026.647 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-04T01:47:06.647Z,1543888026.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:47:06.647Z,1543888026.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-04T01:47:07.030Z,1543888027.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:47:07.030Z,1543888027.030 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:47:07.031Z,1543888027.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:47:07.031Z,1543888027.031 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:47:07.031Z,1543888027.031 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:47:07.032Z,1543888027.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:47:13.399Z,1543888033.399 [NAL9602](INFO): Powering up NAL9602 2018-12-04T01:47:24.599Z,1543888044.599 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:48:47.502Z,1543888127.502 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T01:43:46.2Z 2018-12-04T01:48:47.502Z,1543888127.502 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T01:48:47.502Z,1543888127.502 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T01:48:52.385Z,1543888132.385 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20181203T211451/Courier0078.lzma 2018-12-04T01:48:53.185Z,1543888133.185 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0078.lzma.bak 2018-12-04T01:48:53.185Z,1543888133.185 [DataOverHttps](INFO): SBD MOMSN=8962370 2018-12-04T01:49:03.204Z,1543888143.204 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T01:49:03.261Z,1543888143.261 [DataOverHttps](INFO): Sending 435 bytes from file Logs/20181203T211451/Express0079.lzma 2018-12-04T01:49:04.061Z,1543888144.061 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0079.lzma.bak 2018-12-04T01:49:04.061Z,1543888144.061 [DataOverHttps](INFO): SBD MOMSN=8962373 2018-12-04T01:49:05.374Z,1543888145.374 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T01:49:05.374Z,1543888145.374 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T01:49:05.374Z,1543888145.374 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T01:49:08.952Z,1543888148.952 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:49:08.953Z,1543888148.953 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-04T01:49:08.953Z,1543888148.953 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:49:08.955Z,1543888148.955 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:49:08.955Z,1543888148.955 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-04T01:49:08.955Z,1543888148.955 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:49:08.968Z,1543888148.968 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:49:08.968Z,1543888148.968 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:49:09.086Z,1543888149.086 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:49:09.086Z,1543888149.086 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-04T01:49:09.091Z,1543888149.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:49:09.091Z,1543888149.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-04T01:49:09.418Z,1543888149.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:49:09.418Z,1543888149.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:49:09.419Z,1543888149.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:49:09.419Z,1543888149.419 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:49:09.420Z,1543888149.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:49:09.420Z,1543888149.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:49:33.391Z,1543888173.391 [NAL9602](INFO): Powering down 2018-12-04T01:51:02.064Z,1543888262.064 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T01:51:02.064Z,1543888262.064 [DropWeight] No Fault, FailCount= 1 2018-12-04T01:51:09.646Z,1543888269.646 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:51:09.646Z,1543888269.646 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-04T01:51:09.646Z,1543888269.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:51:09.648Z,1543888269.648 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:51:09.648Z,1543888269.648 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-04T01:51:09.648Z,1543888269.648 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:51:09.662Z,1543888269.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:51:09.662Z,1543888269.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:51:10.066Z,1543888270.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:51:10.066Z,1543888270.066 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-04T01:51:10.067Z,1543888270.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:51:10.067Z,1543888270.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-04T01:51:10.450Z,1543888270.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:51:10.451Z,1543888270.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:51:10.451Z,1543888270.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:51:10.451Z,1543888270.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:51:10.452Z,1543888270.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:51:10.452Z,1543888270.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:53:10.674Z,1543888390.674 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:53:10.674Z,1543888390.674 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-04T01:53:10.674Z,1543888390.674 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:53:10.676Z,1543888390.676 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:53:10.676Z,1543888390.676 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-04T01:53:10.677Z,1543888390.677 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:53:10.690Z,1543888390.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:53:10.690Z,1543888390.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:53:11.081Z,1543888391.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:53:11.081Z,1543888391.081 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-04T01:53:11.082Z,1543888391.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:53:11.082Z,1543888391.082 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-04T01:53:11.474Z,1543888391.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:53:11.474Z,1543888391.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:53:11.475Z,1543888391.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:53:11.475Z,1543888391.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:53:11.475Z,1543888391.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:53:11.476Z,1543888391.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:54:05.786Z,1543888445.786 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T01:54:05.786Z,1543888445.786 [Default:CheckIn:C.Wait] Stopped 2018-12-04T01:54:05.786Z,1543888445.786 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T01:54:05.786Z,1543888445.786 [Default:CheckIn:D] Running Loop=1 2018-12-04T01:54:06.194Z,1543888446.194 [Default:CheckIn:D] Stopped 2018-12-04T01:54:06.210Z,1543888446.210 [Default:CheckIn:E] Running Loop=1 2018-12-04T01:54:06.594Z,1543888446.594 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 279.236198 min 2018-12-04T01:54:06.594Z,1543888446.594 [Default:CheckIn:E] Stopped 2018-12-04T01:54:06.594Z,1543888446.594 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T01:54:06.595Z,1543888446.595 [Default:CheckIn] Stopped 2018-12-04T01:54:06.595Z,1543888446.595 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T01:54:06.595Z,1543888446.595 [Default:CheckIn](INFO): Running loop #28 2018-12-04T01:54:06.595Z,1543888446.595 [Default:CheckIn] Running Loop=28 2018-12-04T01:54:06.595Z,1543888446.595 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T01:54:06.595Z,1543888446.595 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T01:54:07.370Z,1543888447.370 [NAL9602](INFO): Powering up 2018-12-04T01:54:18.564Z,1543888458.564 [NAL9602](INFO): NAL9602 initialized 2018-12-04T01:55:11.765Z,1543888511.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:55:11.766Z,1543888511.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-04T01:55:11.766Z,1543888511.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:55:11.770Z,1543888511.770 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:55:11.770Z,1543888511.770 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-04T01:55:11.770Z,1543888511.770 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:55:11.784Z,1543888511.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:55:11.784Z,1543888511.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:55:12.175Z,1543888512.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:55:12.175Z,1543888512.175 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-04T01:55:12.176Z,1543888512.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:55:12.176Z,1543888512.176 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-04T01:55:12.536Z,1543888512.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:55:12.537Z,1543888512.537 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:55:12.537Z,1543888512.537 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:55:12.537Z,1543888512.537 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:55:12.538Z,1543888512.538 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:55:12.538Z,1543888512.538 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:57:12.781Z,1543888632.781 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:57:12.781Z,1543888632.781 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-04T01:57:12.781Z,1543888632.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:57:12.784Z,1543888632.784 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:57:12.784Z,1543888632.784 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-04T01:57:12.784Z,1543888632.784 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:57:12.821Z,1543888632.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:57:12.821Z,1543888632.821 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:57:13.203Z,1543888633.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:57:13.203Z,1543888633.203 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-04T01:57:13.204Z,1543888633.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:57:13.204Z,1543888633.204 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-04T01:57:13.573Z,1543888633.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:57:13.573Z,1543888633.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:57:13.573Z,1543888633.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:57:13.574Z,1543888633.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:57:13.574Z,1543888633.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:57:13.575Z,1543888633.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:59:07.662Z,1543888747.662 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T01:54:06.6Z 2018-12-04T01:59:07.662Z,1543888747.662 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T01:59:07.663Z,1543888747.663 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T01:59:12.561Z,1543888752.561 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0081.lzma 2018-12-04T01:59:13.345Z,1543888753.345 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0081.lzma.bak 2018-12-04T01:59:13.345Z,1543888753.345 [DataOverHttps](INFO): SBD MOMSN=8962399 2018-12-04T01:59:14.631Z,1543888754.631 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:59:14.631Z,1543888754.631 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-04T01:59:14.631Z,1543888754.631 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T01:59:14.633Z,1543888754.633 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T01:59:14.633Z,1543888754.633 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-04T01:59:14.633Z,1543888754.633 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T01:59:14.647Z,1543888754.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T01:59:14.647Z,1543888754.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T01:59:14.763Z,1543888754.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T01:59:14.763Z,1543888754.763 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-04T01:59:14.763Z,1543888754.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T01:59:14.764Z,1543888754.764 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-04T01:59:17.826Z,1543888757.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T01:59:17.827Z,1543888757.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:59:17.827Z,1543888757.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:59:17.827Z,1543888757.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T01:59:17.828Z,1543888757.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T01:59:17.828Z,1543888757.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T01:59:22.682Z,1543888762.682 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T01:59:22.759Z,1543888762.759 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0082.lzma 2018-12-04T01:59:23.538Z,1543888763.538 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0082.lzma.bak 2018-12-04T01:59:23.538Z,1543888763.538 [DataOverHttps](INFO): SBD MOMSN=8962401 2018-12-04T01:59:24.823Z,1543888764.823 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T01:59:24.823Z,1543888764.823 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T01:59:24.823Z,1543888764.823 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T01:59:52.799Z,1543888792.799 [NAL9602](INFO): Powering down 2018-12-04T02:01:18.117Z,1543888878.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:01:18.117Z,1543888878.117 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-04T02:01:18.117Z,1543888878.117 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:01:18.119Z,1543888878.119 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:01:18.119Z,1543888878.119 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-04T02:01:18.119Z,1543888878.119 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:01:18.133Z,1543888878.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:01:18.133Z,1543888878.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:01:18.531Z,1543888878.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:01:18.531Z,1543888878.531 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-04T02:01:18.532Z,1543888878.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:01:18.532Z,1543888878.532 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-04T02:01:18.916Z,1543888878.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:01:18.917Z,1543888878.917 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:01:18.917Z,1543888878.917 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:01:18.917Z,1543888878.917 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:01:18.918Z,1543888878.918 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:01:18.918Z,1543888878.918 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:03:19.229Z,1543888999.229 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:03:19.229Z,1543888999.229 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-04T02:03:19.229Z,1543888999.229 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:03:19.232Z,1543888999.232 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:03:19.232Z,1543888999.232 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-04T02:03:19.232Z,1543888999.232 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:03:19.246Z,1543888999.246 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:03:19.246Z,1543888999.246 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:03:19.640Z,1543888999.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:03:19.640Z,1543888999.640 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-04T02:03:19.640Z,1543888999.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:03:19.640Z,1543888999.640 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-04T02:03:20.038Z,1543889000.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:03:20.039Z,1543889000.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:03:20.039Z,1543889000.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:03:20.040Z,1543889000.040 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:03:20.040Z,1543889000.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:03:20.040Z,1543889000.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:04:24.972Z,1543889064.972 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T02:04:24.972Z,1543889064.972 [Default:CheckIn:C.Wait] Stopped 2018-12-04T02:04:24.972Z,1543889064.972 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T02:04:24.972Z,1543889064.972 [Default:CheckIn:D] Running Loop=1 2018-12-04T02:04:25.362Z,1543889065.362 [Default:CheckIn:D] Stopped 2018-12-04T02:04:25.362Z,1543889065.362 [Default:CheckIn:E] Running Loop=1 2018-12-04T02:04:25.763Z,1543889065.763 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 289.555664 min 2018-12-04T02:04:25.763Z,1543889065.763 [Default:CheckIn:E] Stopped 2018-12-04T02:04:25.763Z,1543889065.763 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T02:04:25.763Z,1543889065.763 [Default:CheckIn] Stopped 2018-12-04T02:04:25.763Z,1543889065.763 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T02:04:25.763Z,1543889065.763 [Default:CheckIn](INFO): Running loop #29 2018-12-04T02:04:25.763Z,1543889065.763 [Default:CheckIn] Running Loop=29 2018-12-04T02:04:25.764Z,1543889065.764 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T02:04:25.764Z,1543889065.764 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T02:04:26.538Z,1543889066.538 [NAL9602](INFO): Powering up 2018-12-04T02:04:37.740Z,1543889077.740 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:04:38.540Z,1543889078.540 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T02:04:38.540Z,1543889078.540 [NAL9602] Data Fault, FailCount= 2 2018-12-04T02:04:38.540Z,1543889078.540 [NAL9602](ERROR): Data Fault 2018-12-04T02:04:38.613Z,1543889078.613 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T02:04:38.940Z,1543889078.940 [NAL9602](INFO): Powering down 2018-12-04T02:04:39.803Z,1543889079.803 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T02:04:39.803Z,1543889079.803 [NAL9602] No Fault, FailCount= 2 2018-12-04T02:05:09.008Z,1543889109.008 [NAL9602](INFO): Powering up NAL9602 2018-12-04T02:05:20.542Z,1543889120.542 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:05:20.543Z,1543889120.543 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-04T02:05:20.543Z,1543889120.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:05:20.545Z,1543889120.545 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:05:20.545Z,1543889120.545 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-04T02:05:20.545Z,1543889120.545 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:05:20.579Z,1543889120.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:05:20.579Z,1543889120.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:05:20.699Z,1543889120.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:05:20.699Z,1543889120.699 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-04T02:05:20.700Z,1543889120.700 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:05:20.700Z,1543889120.700 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-04T02:05:20.996Z,1543889120.996 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:05:21.015Z,1543889121.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:05:21.015Z,1543889121.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:05:21.016Z,1543889121.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:05:21.016Z,1543889121.016 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:05:21.016Z,1543889121.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:05:21.017Z,1543889121.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:07:21.351Z,1543889241.351 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:07:21.351Z,1543889241.351 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-04T02:07:21.351Z,1543889241.351 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:07:21.353Z,1543889241.353 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:07:21.353Z,1543889241.353 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-04T02:07:21.353Z,1543889241.353 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:07:21.368Z,1543889241.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:07:21.368Z,1543889241.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:07:21.769Z,1543889241.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:07:21.769Z,1543889241.769 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-04T02:07:21.769Z,1543889241.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:07:21.769Z,1543889241.769 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-04T02:07:22.146Z,1543889242.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:07:22.146Z,1543889242.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:07:22.147Z,1543889242.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:07:22.147Z,1543889242.147 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:07:22.148Z,1543889242.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:07:22.148Z,1543889242.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:09:22.313Z,1543889362.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:09:22.313Z,1543889362.313 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-04T02:09:22.313Z,1543889362.313 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:09:22.315Z,1543889362.315 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:09:22.316Z,1543889362.316 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-04T02:09:22.316Z,1543889362.316 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:09:22.329Z,1543889362.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:09:22.329Z,1543889362.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:09:22.764Z,1543889362.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:09:22.764Z,1543889362.764 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-04T02:09:22.764Z,1543889362.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:09:22.765Z,1543889362.765 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-04T02:09:23.126Z,1543889363.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:09:23.127Z,1543889363.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:09:23.127Z,1543889363.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:09:23.127Z,1543889363.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:09:23.128Z,1543889363.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:09:23.128Z,1543889363.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:09:27.026Z,1543889367.026 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T02:04:25.8Z 2018-12-04T02:09:27.026Z,1543889367.026 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T02:09:27.026Z,1543889367.026 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T02:09:31.912Z,1543889371.912 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0084.lzma 2018-12-04T02:09:32.697Z,1543889372.697 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0084.lzma.bak 2018-12-04T02:09:32.697Z,1543889372.697 [DataOverHttps](INFO): SBD MOMSN=8962422 2018-12-04T02:09:42.009Z,1543889382.009 [DataOverHttps](INFO): Sending 316 bytes from file Logs/20181203T211451/Express0085.lzma 2018-12-04T02:09:42.809Z,1543889382.809 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0085.lzma.bak 2018-12-04T02:09:42.809Z,1543889382.809 [DataOverHttps](INFO): SBD MOMSN=8962424 2018-12-04T02:09:44.095Z,1543889384.095 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T02:09:44.095Z,1543889384.095 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T02:09:44.095Z,1543889384.095 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T02:10:24.246Z,1543889424.246 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T02:10:55.052Z,1543889455.052 [NAL9602](INFO): Powering down 2018-12-04T02:11:23.178Z,1543889483.178 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:11:23.178Z,1543889483.178 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-04T02:11:23.179Z,1543889483.179 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:11:23.181Z,1543889483.181 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:11:23.181Z,1543889483.181 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-04T02:11:23.181Z,1543889483.181 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:11:23.195Z,1543889483.195 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:11:23.195Z,1543889483.195 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:11:23.588Z,1543889483.588 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:11:23.588Z,1543889483.588 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-04T02:11:23.589Z,1543889483.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:11:23.589Z,1543889483.589 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-04T02:11:23.977Z,1543889483.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:11:23.978Z,1543889483.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:11:23.978Z,1543889483.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:11:23.978Z,1543889483.978 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:11:23.979Z,1543889483.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:11:23.979Z,1543889483.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:13:24.379Z,1543889604.379 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:13:24.379Z,1543889604.379 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-04T02:13:24.379Z,1543889604.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:13:24.381Z,1543889604.381 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:13:24.381Z,1543889604.381 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-04T02:13:24.381Z,1543889604.381 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:13:24.419Z,1543889604.419 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:13:24.419Z,1543889604.419 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:13:24.794Z,1543889604.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:13:24.794Z,1543889604.794 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-04T02:13:24.823Z,1543889604.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:13:24.823Z,1543889604.823 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-04T02:13:25.182Z,1543889605.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:13:25.182Z,1543889605.182 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:13:25.183Z,1543889605.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:13:25.183Z,1543889605.183 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:13:25.183Z,1543889605.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:13:25.184Z,1543889605.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:14:44.380Z,1543889684.380 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T02:14:44.380Z,1543889684.380 [Default:CheckIn:C.Wait] Stopped 2018-12-04T02:14:44.380Z,1543889684.380 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T02:14:44.380Z,1543889684.380 [Default:CheckIn:D] Running Loop=1 2018-12-04T02:14:44.805Z,1543889684.805 [Default:CheckIn:D] Stopped 2018-12-04T02:14:44.805Z,1543889684.805 [Default:CheckIn:E] Running Loop=1 2018-12-04T02:14:45.208Z,1543889685.208 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 299.879720 min 2018-12-04T02:14:45.208Z,1543889685.208 [Default:CheckIn:E] Stopped 2018-12-04T02:14:45.208Z,1543889685.208 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T02:14:45.208Z,1543889685.208 [Default:CheckIn] Stopped 2018-12-04T02:14:45.208Z,1543889685.208 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T02:14:45.208Z,1543889685.208 [Default:CheckIn](INFO): Running loop #30 2018-12-04T02:14:45.208Z,1543889685.208 [Default:CheckIn] Running Loop=30 2018-12-04T02:14:45.209Z,1543889685.209 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T02:14:45.209Z,1543889685.209 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T02:14:45.960Z,1543889685.960 [NAL9602](INFO): Powering up 2018-12-04T02:14:57.160Z,1543889697.160 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:15:25.553Z,1543889725.553 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:15:25.553Z,1543889725.553 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-04T02:15:25.553Z,1543889725.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:15:25.555Z,1543889725.555 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:15:25.556Z,1543889725.556 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-04T02:15:25.556Z,1543889725.556 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:15:25.569Z,1543889725.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:15:25.569Z,1543889725.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:15:25.970Z,1543889725.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:15:25.970Z,1543889725.970 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-04T02:15:25.971Z,1543889725.971 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:15:25.971Z,1543889725.971 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-04T02:15:26.351Z,1543889726.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:15:26.352Z,1543889726.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:15:26.352Z,1543889726.352 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:15:26.353Z,1543889726.353 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:15:26.353Z,1543889726.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:15:26.353Z,1543889726.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:15:29.128Z,1543889729.128 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T02:15:29.203Z,1543889729.203 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T02:15:29.203Z,1543889729.203 [NAL9602] Data Fault, FailCount= 3 2018-12-04T02:15:29.203Z,1543889729.203 [NAL9602](ERROR): Data Fault 2018-12-04T02:15:29.237Z,1543889729.237 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T02:15:29.532Z,1543889729.532 [NAL9602](INFO): Powering down 2018-12-04T02:15:30.386Z,1543889730.386 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T02:15:30.386Z,1543889730.386 [NAL9602] No Fault, FailCount= 3 2018-12-04T02:15:59.892Z,1543889759.892 [NAL9602](INFO): Powering up NAL9602 2018-12-04T02:16:11.092Z,1543889771.092 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:16:11.903Z,1543889771.903 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T02:16:11.903Z,1543889771.903 [NAL9602] Data Fault, FailCount= 4 2018-12-04T02:16:11.903Z,1543889771.903 [NAL9602](ERROR): Data Fault 2018-12-04T02:16:11.938Z,1543889771.938 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T02:16:15.158Z,1543889775.158 [NAL9602](INFO): Powering down 2018-12-04T02:16:15.648Z,1543889775.648 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T02:16:15.648Z,1543889775.648 [NAL9602] No Fault, FailCount= 4 2018-12-04T02:16:45.214Z,1543889805.214 [NAL9602](INFO): Powering up NAL9602 2018-12-04T02:16:56.020Z,1543889816.020 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:17:26.418Z,1543889846.418 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:17:26.418Z,1543889846.418 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-04T02:17:26.418Z,1543889846.418 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:17:26.420Z,1543889846.420 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:17:26.420Z,1543889846.420 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-04T02:17:26.420Z,1543889846.420 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:17:26.459Z,1543889846.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:17:26.459Z,1543889846.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:17:26.819Z,1543889846.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:17:26.819Z,1543889846.819 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-04T02:17:26.820Z,1543889846.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:17:26.820Z,1543889846.820 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-04T02:17:27.214Z,1543889847.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:17:27.214Z,1543889847.214 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:17:27.215Z,1543889847.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:17:27.215Z,1543889847.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:17:27.216Z,1543889847.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:17:27.216Z,1543889847.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:19:27.270Z,1543889967.270 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:19:27.270Z,1543889967.270 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-04T02:19:27.270Z,1543889967.270 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:19:27.272Z,1543889967.272 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:19:27.272Z,1543889967.272 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-04T02:19:27.273Z,1543889967.273 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:19:27.286Z,1543889967.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:19:27.334Z,1543889967.334 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:19:27.677Z,1543889967.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:19:27.677Z,1543889967.677 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-04T02:19:27.678Z,1543889967.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:19:27.678Z,1543889967.678 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-04T02:19:28.061Z,1543889968.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:19:28.062Z,1543889968.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:19:28.062Z,1543889968.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:19:28.063Z,1543889968.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:19:28.063Z,1543889968.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:19:28.063Z,1543889968.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:19:46.430Z,1543889986.430 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T02:14:45.2Z 2018-12-04T02:19:46.430Z,1543889986.430 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T02:19:46.430Z,1543889986.430 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T02:19:51.419Z,1543889991.419 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0087.lzma 2018-12-04T02:19:52.202Z,1543889992.202 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0087.lzma.bak 2018-12-04T02:19:52.202Z,1543889992.202 [DataOverHttps](INFO): SBD MOMSN=8962448 2018-12-04T02:20:01.430Z,1543890001.430 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T02:20:01.501Z,1543890001.501 [DataOverHttps](INFO): Sending 343 bytes from file Logs/20181203T211451/Express0088.lzma 2018-12-04T02:20:02.301Z,1543890002.301 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0088.lzma.bak 2018-12-04T02:20:02.301Z,1543890002.301 [DataOverHttps](INFO): SBD MOMSN=8962450 2018-12-04T02:20:03.633Z,1543890003.633 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T02:20:03.633Z,1543890003.633 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T02:20:03.633Z,1543890003.633 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T02:20:31.611Z,1543890031.611 [NAL9602](INFO): Powering down 2018-12-04T02:21:03.567Z,1543890063.567 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T02:21:03.567Z,1543890063.567 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T02:21:03.567Z,1543890063.567 [DropWeight](ERROR): Hardware Fault 2018-12-04T02:21:03.619Z,1543890063.619 [CBIT](INFO): Critical error at 20181204T022103 2018-12-04T02:21:03.622Z,1543890063.622 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T02:21:03.622Z,1543890063.622 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T02:21:04.012Z,1543890064.012 [CBIT](INFO): Critical error at 20181204T022103 2018-12-04T02:21:28.350Z,1543890088.350 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:21:28.350Z,1543890088.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-04T02:21:28.350Z,1543890088.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:21:28.352Z,1543890088.352 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:21:28.352Z,1543890088.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-04T02:21:28.353Z,1543890088.353 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:21:28.366Z,1543890088.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:21:28.366Z,1543890088.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:21:28.755Z,1543890088.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:21:28.756Z,1543890088.756 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-04T02:21:28.756Z,1543890088.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:21:28.756Z,1543890088.756 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-04T02:21:29.150Z,1543890089.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:21:29.150Z,1543890089.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:21:29.151Z,1543890089.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:21:29.151Z,1543890089.151 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:21:29.152Z,1543890089.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:21:29.152Z,1543890089.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:23:29.290Z,1543890209.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:23:29.291Z,1543890209.291 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-04T02:23:29.291Z,1543890209.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:23:29.293Z,1543890209.293 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:23:29.293Z,1543890209.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-04T02:23:29.293Z,1543890209.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:23:29.328Z,1543890209.328 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:23:29.329Z,1543890209.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:23:29.723Z,1543890209.723 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:23:29.723Z,1543890209.723 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-04T02:23:29.724Z,1543890209.724 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:23:29.724Z,1543890209.724 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-04T02:23:30.094Z,1543890210.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:23:30.094Z,1543890210.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:23:30.095Z,1543890210.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:23:30.095Z,1543890210.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:23:30.095Z,1543890210.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:23:30.096Z,1543890210.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:25:03.739Z,1543890303.739 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T02:25:03.739Z,1543890303.739 [Default:CheckIn:C.Wait] Stopped 2018-12-04T02:25:03.739Z,1543890303.739 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T02:25:03.739Z,1543890303.739 [Default:CheckIn:D] Running Loop=1 2018-12-04T02:25:04.141Z,1543890304.141 [Default:CheckIn:D] Stopped 2018-12-04T02:25:04.142Z,1543890304.142 [Default:CheckIn:E] Running Loop=1 2018-12-04T02:25:04.541Z,1543890304.541 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 310.201986 min 2018-12-04T02:25:04.541Z,1543890304.541 [Default:CheckIn:E] Stopped 2018-12-04T02:25:04.541Z,1543890304.541 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T02:25:04.541Z,1543890304.541 [Default:CheckIn] Stopped 2018-12-04T02:25:04.542Z,1543890304.542 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T02:25:04.542Z,1543890304.542 [Default:CheckIn](INFO): Running loop #31 2018-12-04T02:25:04.542Z,1543890304.542 [Default:CheckIn] Running Loop=31 2018-12-04T02:25:04.542Z,1543890304.542 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T02:25:04.542Z,1543890304.542 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T02:25:05.311Z,1543890305.311 [NAL9602](INFO): Powering up 2018-12-04T02:25:16.515Z,1543890316.515 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:25:30.190Z,1543890330.190 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:25:30.190Z,1543890330.190 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-04T02:25:30.190Z,1543890330.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:25:30.192Z,1543890330.192 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:25:30.193Z,1543890330.193 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-04T02:25:30.193Z,1543890330.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:25:30.207Z,1543890330.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:25:30.207Z,1543890330.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:25:30.609Z,1543890330.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:25:30.609Z,1543890330.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-04T02:25:30.609Z,1543890330.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:25:30.609Z,1543890330.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-04T02:25:30.978Z,1543890330.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:25:30.978Z,1543890330.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:25:30.979Z,1543890330.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:25:30.979Z,1543890330.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:25:30.979Z,1543890330.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:25:30.980Z,1543890330.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:27:30.000Z,1543890451.000 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:27:30.000Z,1543890451.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-04T02:27:30.000Z,1543890451.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:27:31.050Z,1543890451.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:27:31.386Z,1543890451.386 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:27:31.394Z,1543890451.394 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-04T02:27:31.394Z,1543890451.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:27:31.413Z,1543890451.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:27:31.413Z,1543890451.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:27:31.413Z,1543890451.413 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-04T02:27:31.778Z,1543890451.778 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:27:31.778Z,1543890451.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:27:31.779Z,1543890451.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:27:31.804Z,1543890451.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:27:31.804Z,1543890451.804 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-04T02:27:32.173Z,1543890452.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:27:32.174Z,1543890452.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:27:32.192Z,1543890452.192 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:29:31.796Z,1543890571.796 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:29:31.796Z,1543890571.796 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-04T02:29:31.796Z,1543890571.796 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:29:31.822Z,1543890571.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:29:32.199Z,1543890572.199 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:29:32.199Z,1543890572.199 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-04T02:29:32.199Z,1543890572.199 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:29:32.213Z,1543890572.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:29:32.213Z,1543890572.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:29:32.213Z,1543890572.213 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-04T02:29:32.579Z,1543890572.579 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:29:32.580Z,1543890572.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:29:32.580Z,1543890572.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:29:32.605Z,1543890572.605 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:29:32.605Z,1543890572.605 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-04T02:29:32.976Z,1543890572.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:29:32.976Z,1543890572.976 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:29:32.977Z,1543890572.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:30:05.762Z,1543890605.762 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T02:25:04.5Z 2018-12-04T02:30:05.763Z,1543890605.763 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T02:30:05.763Z,1543890605.763 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T02:30:10.679Z,1543890610.679 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0090.lzma 2018-12-04T02:30:11.477Z,1543890611.477 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0090.lzma.bak 2018-12-04T02:30:11.477Z,1543890611.477 [DataOverHttps](INFO): SBD MOMSN=8962475 2018-12-04T02:30:20.948Z,1543890620.948 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T02:30:21.828Z,1543890621.828 [DataOverHttps](INFO): Sending 292 bytes from file Logs/20181203T211451/Express0091.lzma 2018-12-04T02:30:22.625Z,1543890622.625 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0091.lzma.bak 2018-12-04T02:30:22.625Z,1543890622.625 [DataOverHttps](INFO): SBD MOMSN=8962479 2018-12-04T02:30:23.915Z,1543890623.915 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T02:30:23.915Z,1543890623.915 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T02:30:23.915Z,1543890623.915 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T02:30:51.091Z,1543890651.091 [NAL9602](INFO): Powering down 2018-12-04T02:31:32.668Z,1543890692.668 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:31:32.668Z,1543890692.668 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-04T02:31:32.668Z,1543890692.668 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:31:32.683Z,1543890692.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:31:33.069Z,1543890693.069 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:31:33.069Z,1543890693.069 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-04T02:31:33.069Z,1543890693.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:31:33.083Z,1543890693.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:31:33.083Z,1543890693.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:31:33.083Z,1543890693.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-04T02:31:33.473Z,1543890693.473 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:31:33.473Z,1543890693.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:31:33.473Z,1543890693.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:31:33.487Z,1543890693.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:31:33.487Z,1543890693.487 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-04T02:31:33.868Z,1543890693.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:31:33.868Z,1543890693.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:31:33.868Z,1543890693.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:33:33.482Z,1543890813.482 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:33:33.483Z,1543890813.483 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-04T02:33:33.483Z,1543890813.483 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:33:33.497Z,1543890813.497 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:33:33.886Z,1543890813.886 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:33:33.886Z,1543890813.886 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-04T02:33:33.886Z,1543890813.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:33:33.900Z,1543890813.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:33:33.900Z,1543890813.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:33:33.900Z,1543890813.900 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-04T02:33:34.286Z,1543890814.286 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:33:34.286Z,1543890814.286 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:33:34.287Z,1543890814.287 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:33:34.300Z,1543890814.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:33:34.300Z,1543890814.300 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-04T02:33:34.681Z,1543890814.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:33:34.681Z,1543890814.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:33:34.681Z,1543890814.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:35:24.058Z,1543890924.058 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T02:35:24.058Z,1543890924.058 [Default:CheckIn:C.Wait] Stopped 2018-12-04T02:35:24.058Z,1543890924.058 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T02:35:24.058Z,1543890924.058 [Default:CheckIn:D] Running Loop=1 2018-12-04T02:35:24.451Z,1543890924.451 [Default:CheckIn:D] Stopped 2018-12-04T02:35:24.452Z,1543890924.452 [Default:CheckIn:E] Running Loop=1 2018-12-04T02:35:24.851Z,1543890924.851 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 320.540495 min 2018-12-04T02:35:24.851Z,1543890924.851 [Default:CheckIn:E] Stopped 2018-12-04T02:35:24.851Z,1543890924.851 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T02:35:24.851Z,1543890924.851 [Default:CheckIn] Stopped 2018-12-04T02:35:24.851Z,1543890924.851 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T02:35:24.851Z,1543890924.851 [Default:CheckIn](INFO): Running loop #32 2018-12-04T02:35:24.852Z,1543890924.852 [Default:CheckIn] Running Loop=32 2018-12-04T02:35:24.852Z,1543890924.852 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T02:35:24.852Z,1543890924.852 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T02:35:25.627Z,1543890925.627 [NAL9602](INFO): Powering up 2018-12-04T02:35:34.448Z,1543890934.448 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:35:34.448Z,1543890934.448 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-04T02:35:34.448Z,1543890934.448 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:35:34.462Z,1543890934.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:35:34.853Z,1543890934.853 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:35:34.853Z,1543890934.853 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-04T02:35:34.853Z,1543890934.853 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:35:34.867Z,1543890934.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:35:34.867Z,1543890934.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:35:34.867Z,1543890934.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-04T02:35:35.252Z,1543890935.252 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:35:35.253Z,1543890935.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:35:35.253Z,1543890935.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:35:35.266Z,1543890935.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:35:35.266Z,1543890935.266 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-04T02:35:35.649Z,1543890935.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:35:35.649Z,1543890935.649 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:35:35.650Z,1543890935.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:35:36.823Z,1543890936.823 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:35:37.624Z,1543890937.624 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T02:35:37.624Z,1543890937.624 [NAL9602] Data Fault, FailCount= 5 2018-12-04T02:35:37.624Z,1543890937.624 [NAL9602](ERROR): Data Fault 2018-12-04T02:35:37.682Z,1543890937.682 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T02:35:37.682Z,1543890937.682 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T02:35:38.023Z,1543890938.023 [NAL9602](INFO): Powering down 2018-12-04T02:35:38.070Z,1543890938.070 [CBIT](INFO): Critical error at 20181204T023537 2018-12-04T02:36:03.630Z,1543890963.630 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T02:36:03.630Z,1543890963.630 [DropWeight] No Fault, FailCount= 1 2018-12-04T02:37:35.647Z,1543891055.647 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:37:35.647Z,1543891055.647 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-04T02:37:35.647Z,1543891055.647 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:37:35.661Z,1543891055.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:37:36.045Z,1543891056.045 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:37:36.045Z,1543891056.045 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-04T02:37:36.045Z,1543891056.045 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:37:36.059Z,1543891056.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:37:36.060Z,1543891056.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:37:36.060Z,1543891056.060 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-04T02:37:36.450Z,1543891056.450 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:37:36.450Z,1543891056.450 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:37:36.451Z,1543891056.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:37:36.464Z,1543891056.464 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:37:36.464Z,1543891056.464 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-04T02:37:36.843Z,1543891056.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:37:36.843Z,1543891056.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:37:36.843Z,1543891056.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:37:37.664Z,1543891057.664 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T02:37:37.664Z,1543891057.664 [NAL9602] No Fault, FailCount= 5 2018-12-04T02:37:38.018Z,1543891058.018 [NAL9602](INFO): Powering up NAL9602 2018-12-04T02:37:48.820Z,1543891068.820 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:39:36.487Z,1543891176.487 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:39:36.487Z,1543891176.487 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-04T02:39:36.487Z,1543891176.487 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:39:36.501Z,1543891176.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:39:36.881Z,1543891176.881 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:39:36.881Z,1543891176.881 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-04T02:39:36.881Z,1543891176.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:39:36.894Z,1543891176.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:39:36.894Z,1543891176.894 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:39:36.894Z,1543891176.894 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-04T02:39:37.279Z,1543891177.279 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:39:37.280Z,1543891177.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:39:37.280Z,1543891177.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:39:37.306Z,1543891177.306 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:39:37.306Z,1543891177.306 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-04T02:39:37.670Z,1543891177.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:39:37.685Z,1543891177.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:39:37.686Z,1543891177.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:40:26.119Z,1543891226.119 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T02:35:24.9Z 2018-12-04T02:40:26.119Z,1543891226.119 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T02:40:26.119Z,1543891226.119 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T02:40:31.084Z,1543891231.084 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0093.lzma 2018-12-04T02:40:31.885Z,1543891231.885 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0093.lzma.bak 2018-12-04T02:40:31.885Z,1543891231.885 [DataOverHttps](INFO): SBD MOMSN=8962500 2018-12-04T02:40:41.260Z,1543891241.260 [DataOverHttps](INFO): Sending 312 bytes from file Logs/20181203T211451/Express0094.lzma 2018-12-04T02:40:42.061Z,1543891242.061 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0094.lzma.bak 2018-12-04T02:40:42.062Z,1543891242.062 [DataOverHttps](INFO): SBD MOMSN=8962503 2018-12-04T02:40:43.350Z,1543891243.350 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T02:40:43.350Z,1543891243.350 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T02:40:43.350Z,1543891243.350 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T02:41:37.541Z,1543891297.541 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:41:37.541Z,1543891297.541 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-04T02:41:37.541Z,1543891297.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:41:37.555Z,1543891297.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:41:37.944Z,1543891297.944 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:41:37.944Z,1543891297.944 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-04T02:41:37.944Z,1543891297.944 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:41:37.957Z,1543891297.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:41:37.958Z,1543891297.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:41:37.958Z,1543891297.958 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-04T02:41:38.342Z,1543891298.342 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:41:38.347Z,1543891298.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:41:38.347Z,1543891298.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:41:38.369Z,1543891298.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:41:38.369Z,1543891298.369 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-04T02:41:38.746Z,1543891298.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:41:38.746Z,1543891298.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:41:38.747Z,1543891298.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:42:52.660Z,1543891372.660 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T02:43:23.183Z,1543891403.183 [NAL9602](INFO): Powering down 2018-12-04T02:43:38.408Z,1543891418.408 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:43:38.408Z,1543891418.408 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-04T02:43:38.408Z,1543891418.408 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:43:38.451Z,1543891418.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:43:38.807Z,1543891418.807 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:43:38.807Z,1543891418.807 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-04T02:43:38.807Z,1543891418.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:43:38.851Z,1543891418.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:43:38.851Z,1543891418.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:43:38.851Z,1543891418.851 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-04T02:43:39.210Z,1543891419.210 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:43:39.225Z,1543891419.225 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:43:39.225Z,1543891419.225 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:43:39.238Z,1543891419.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:43:39.238Z,1543891419.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-04T02:43:39.601Z,1543891419.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:43:39.601Z,1543891419.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:43:39.602Z,1543891419.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:45:39.334Z,1543891539.334 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:45:39.334Z,1543891539.334 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-04T02:45:39.334Z,1543891539.334 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:45:39.348Z,1543891539.348 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:45:39.729Z,1543891539.729 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:45:39.729Z,1543891539.729 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-04T02:45:39.729Z,1543891539.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:45:39.742Z,1543891539.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:45:39.743Z,1543891539.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:45:39.743Z,1543891539.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-04T02:45:40.118Z,1543891540.118 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:45:40.133Z,1543891540.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:45:40.133Z,1543891540.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:45:40.146Z,1543891540.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:45:40.146Z,1543891540.146 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-04T02:45:40.518Z,1543891540.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:45:40.532Z,1543891540.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:45:40.532Z,1543891540.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:45:43.722Z,1543891543.722 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T02:45:43.722Z,1543891543.722 [Default:CheckIn:C.Wait] Stopped 2018-12-04T02:45:43.722Z,1543891543.722 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T02:45:43.722Z,1543891543.722 [Default:CheckIn:D] Running Loop=1 2018-12-04T02:45:44.122Z,1543891544.122 [Default:CheckIn:D] Stopped 2018-12-04T02:45:44.122Z,1543891544.122 [Default:CheckIn:E] Running Loop=1 2018-12-04T02:45:44.515Z,1543891544.515 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 330.868327 min 2018-12-04T02:45:44.515Z,1543891544.515 [Default:CheckIn:E] Stopped 2018-12-04T02:45:44.515Z,1543891544.515 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T02:45:44.515Z,1543891544.515 [Default:CheckIn] Stopped 2018-12-04T02:45:44.515Z,1543891544.515 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T02:45:44.516Z,1543891544.516 [Default:CheckIn](INFO): Running loop #33 2018-12-04T02:45:44.516Z,1543891544.516 [Default:CheckIn] Running Loop=33 2018-12-04T02:45:44.516Z,1543891544.516 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T02:45:44.516Z,1543891544.516 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T02:45:45.295Z,1543891545.295 [NAL9602](INFO): Powering up 2018-12-04T02:45:56.496Z,1543891556.496 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:46:28.260Z,1543891588.260 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T02:46:28.342Z,1543891588.342 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T02:46:28.342Z,1543891588.342 [NAL9602] Data Fault, FailCount= 1 2018-12-04T02:46:28.342Z,1543891588.342 [NAL9602](ERROR): Data Fault 2018-12-04T02:46:28.402Z,1543891588.402 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T02:46:28.660Z,1543891588.660 [NAL9602](INFO): Powering down 2018-12-04T02:46:29.507Z,1543891589.507 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T02:46:29.507Z,1543891589.507 [NAL9602] No Fault, FailCount= 1 2018-12-04T02:46:58.724Z,1543891618.724 [NAL9602](INFO): Powering up NAL9602 2018-12-04T02:47:09.524Z,1543891629.524 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:47:40.483Z,1543891660.483 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:47:40.483Z,1543891660.483 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-04T02:47:40.483Z,1543891660.483 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:47:40.497Z,1543891660.497 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:47:40.990Z,1543891660.990 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:47:40.990Z,1543891660.990 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-04T02:47:40.990Z,1543891660.990 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:47:41.005Z,1543891661.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:47:41.005Z,1543891661.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:47:41.005Z,1543891661.005 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-04T02:47:41.306Z,1543891661.306 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:47:41.307Z,1543891661.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:47:41.307Z,1543891661.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:47:41.333Z,1543891661.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:47:41.333Z,1543891661.333 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-04T02:47:41.687Z,1543891661.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:47:41.687Z,1543891661.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:47:41.687Z,1543891661.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:48:08.023Z,1543891688.023 [BPC1](INFO): Calculating totals. Valid battery stick count: 53. Valid reserve battery stick count: 6. 2018-12-04T02:49:41.371Z,1543891781.371 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:49:41.372Z,1543891781.372 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-04T02:49:41.372Z,1543891781.372 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:49:41.407Z,1543891781.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:49:41.763Z,1543891781.763 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:49:41.763Z,1543891781.763 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-04T02:49:41.763Z,1543891781.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:49:41.787Z,1543891781.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:49:41.787Z,1543891781.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:49:41.787Z,1543891781.787 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-04T02:49:42.182Z,1543891782.182 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:49:42.193Z,1543891782.193 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:49:42.194Z,1543891782.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:49:42.207Z,1543891782.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:49:42.207Z,1543891782.207 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-04T02:49:42.592Z,1543891782.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:49:42.593Z,1543891782.593 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:49:42.593Z,1543891782.593 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:50:46.104Z,1543891846.104 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T02:45:44.5Z 2018-12-04T02:50:46.104Z,1543891846.104 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T02:50:46.104Z,1543891846.104 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T02:50:46.998Z,1543891846.998 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0096.lzma 2018-12-04T02:50:47.870Z,1543891847.870 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0096.lzma.bak 2018-12-04T02:50:47.870Z,1543891847.870 [DataOverHttps](INFO): SBD MOMSN=8962525 2018-12-04T02:50:57.261Z,1543891857.261 [DataOverHttps](INFO): Sending 336 bytes from file Logs/20181203T211451/Express0097.lzma 2018-12-04T02:50:58.029Z,1543891858.029 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0097.lzma.bak 2018-12-04T02:50:58.029Z,1543891858.029 [DataOverHttps](INFO): SBD MOMSN=8962527 2018-12-04T02:50:59.396Z,1543891859.396 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T02:50:59.396Z,1543891859.396 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T02:50:59.396Z,1543891859.396 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T02:51:02.518Z,1543891862.518 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T02:51:32.987Z,1543891892.987 [NAL9602](INFO): Powering down 2018-12-04T02:51:42.245Z,1543891902.245 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:51:42.245Z,1543891902.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-04T02:51:42.245Z,1543891902.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:51:42.259Z,1543891902.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:51:42.646Z,1543891902.646 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:51:42.647Z,1543891902.647 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-04T02:51:42.647Z,1543891902.647 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:51:42.661Z,1543891902.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:51:42.661Z,1543891902.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:51:42.661Z,1543891902.661 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-04T02:51:43.050Z,1543891903.050 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:51:43.051Z,1543891903.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:51:43.051Z,1543891903.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:51:43.064Z,1543891903.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:51:43.064Z,1543891903.064 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-04T02:51:43.466Z,1543891903.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:51:43.466Z,1543891903.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:51:43.467Z,1543891903.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:53:43.356Z,1543892023.356 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:53:43.356Z,1543892023.356 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-04T02:53:43.356Z,1543892023.356 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:53:43.371Z,1543892023.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:53:43.738Z,1543892023.738 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:53:43.738Z,1543892023.738 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-04T02:53:43.738Z,1543892023.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:53:43.763Z,1543892023.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:53:43.764Z,1543892023.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:53:43.764Z,1543892023.764 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-04T02:53:44.146Z,1543892024.146 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:53:44.146Z,1543892024.146 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:53:44.147Z,1543892024.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:53:44.159Z,1543892024.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:53:44.160Z,1543892024.160 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-04T02:53:44.541Z,1543892024.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:53:44.541Z,1543892024.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:53:44.542Z,1543892024.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:55:44.459Z,1543892144.459 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:55:44.459Z,1543892144.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-04T02:55:44.459Z,1543892144.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:55:44.473Z,1543892144.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:55:44.568Z,1543892144.568 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:55:44.568Z,1543892144.568 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-04T02:55:44.569Z,1543892144.569 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:55:44.582Z,1543892144.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:55:44.582Z,1543892144.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:55:44.582Z,1543892144.582 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-04T02:55:44.914Z,1543892144.914 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:55:44.915Z,1543892144.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:55:44.915Z,1543892144.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:55:44.929Z,1543892144.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:55:44.929Z,1543892144.929 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-04T02:55:45.322Z,1543892145.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:55:45.323Z,1543892145.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:55:45.323Z,1543892145.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:55:59.727Z,1543892159.727 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T02:55:59.727Z,1543892159.727 [Default:CheckIn:C.Wait] Stopped 2018-12-04T02:55:59.727Z,1543892159.727 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T02:55:59.727Z,1543892159.727 [Default:CheckIn:D] Running Loop=1 2018-12-04T02:56:00.125Z,1543892160.125 [Default:CheckIn:D] Stopped 2018-12-04T02:56:00.125Z,1543892160.125 [Default:CheckIn:E] Running Loop=1 2018-12-04T02:56:00.527Z,1543892160.527 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 341.135059 min 2018-12-04T02:56:00.528Z,1543892160.528 [Default:CheckIn:E] Stopped 2018-12-04T02:56:00.528Z,1543892160.528 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T02:56:00.528Z,1543892160.528 [Default:CheckIn] Stopped 2018-12-04T02:56:00.528Z,1543892160.528 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T02:56:00.528Z,1543892160.528 [Default:CheckIn](INFO): Running loop #34 2018-12-04T02:56:00.528Z,1543892160.528 [Default:CheckIn] Running Loop=34 2018-12-04T02:56:00.528Z,1543892160.528 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T02:56:00.529Z,1543892160.529 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T02:56:01.287Z,1543892161.287 [NAL9602](INFO): Powering up 2018-12-04T02:56:12.088Z,1543892172.088 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:56:12.886Z,1543892172.886 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T02:56:12.886Z,1543892172.886 [NAL9602] Data Fault, FailCount= 2 2018-12-04T02:56:12.886Z,1543892172.886 [NAL9602](ERROR): Data Fault 2018-12-04T02:56:12.945Z,1543892172.945 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T02:56:13.288Z,1543892173.288 [NAL9602](INFO): Powering down 2018-12-04T02:56:14.132Z,1543892174.132 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T02:56:14.132Z,1543892174.132 [NAL9602] No Fault, FailCount= 2 2018-12-04T02:56:43.660Z,1543892203.660 [NAL9602](INFO): Powering up NAL9602 2018-12-04T02:56:55.376Z,1543892215.376 [NAL9602](INFO): NAL9602 initialized 2018-12-04T02:57:45.047Z,1543892265.047 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:57:45.047Z,1543892265.047 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-04T02:57:45.047Z,1543892265.047 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:57:45.061Z,1543892265.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:57:45.454Z,1543892265.454 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:57:45.454Z,1543892265.454 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-04T02:57:45.454Z,1543892265.454 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:57:45.468Z,1543892265.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:57:45.468Z,1543892265.468 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:57:45.468Z,1543892265.468 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-04T02:57:45.854Z,1543892265.854 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:57:45.855Z,1543892265.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:57:45.855Z,1543892265.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:57:45.868Z,1543892265.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:57:45.868Z,1543892265.868 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-04T02:57:46.254Z,1543892266.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:57:46.254Z,1543892266.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:57:46.255Z,1543892266.255 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:59:46.255Z,1543892386.255 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:59:46.255Z,1543892386.255 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-04T02:59:46.256Z,1543892386.256 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T02:59:46.269Z,1543892386.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T02:59:46.671Z,1543892386.671 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T02:59:46.671Z,1543892386.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-04T02:59:46.672Z,1543892386.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T02:59:46.685Z,1543892386.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T02:59:46.685Z,1543892386.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T02:59:46.685Z,1543892386.685 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-04T02:59:47.058Z,1543892387.058 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T02:59:47.059Z,1543892387.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:59:47.059Z,1543892387.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T02:59:47.097Z,1543892387.096 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T02:59:47.097Z,1543892387.097 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-04T02:59:47.458Z,1543892387.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T02:59:47.459Z,1543892387.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T02:59:47.459Z,1543892387.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:01:01.492Z,1543892461.492 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T02:56:00.5Z 2018-12-04T03:01:01.493Z,1543892461.493 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T03:01:01.493Z,1543892461.493 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T03:01:06.441Z,1543892466.441 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0099.lzma 2018-12-04T03:01:07.225Z,1543892467.225 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0099.lzma.bak 2018-12-04T03:01:07.225Z,1543892467.225 [DataOverHttps](INFO): SBD MOMSN=8962550 2018-12-04T03:01:17.544Z,1543892477.544 [DataOverHttps](INFO): Sending 312 bytes from file Logs/20181203T211451/Express0100.lzma 2018-12-04T03:01:18.341Z,1543892478.341 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0100.lzma.bak 2018-12-04T03:01:18.341Z,1543892478.341 [DataOverHttps](INFO): SBD MOMSN=8962552 2018-12-04T03:01:19.635Z,1543892479.635 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T03:01:19.635Z,1543892479.635 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T03:01:19.635Z,1543892479.635 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T03:01:47.295Z,1543892507.295 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:01:47.295Z,1543892507.295 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-04T03:01:47.295Z,1543892507.295 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:01:47.309Z,1543892507.309 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:01:47.669Z,1543892507.669 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:01:47.669Z,1543892507.669 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-04T03:01:47.669Z,1543892507.669 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:01:47.699Z,1543892507.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:01:47.699Z,1543892507.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:01:47.699Z,1543892507.699 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-04T03:01:48.078Z,1543892508.078 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:01:48.079Z,1543892508.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:01:48.079Z,1543892508.079 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:01:48.120Z,1543892508.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:01:48.121Z,1543892508.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-04T03:01:48.478Z,1543892508.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:01:48.478Z,1543892508.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:01:48.479Z,1543892508.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:01:58.352Z,1543892518.352 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T03:02:28.829Z,1543892548.829 [NAL9602](INFO): Powering down 2018-12-04T03:03:48.455Z,1543892628.455 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:03:48.455Z,1543892628.455 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-04T03:03:48.455Z,1543892628.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:03:48.469Z,1543892628.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:03:48.470Z,1543892628.470 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:03:48.852Z,1543892628.852 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:03:48.852Z,1543892628.852 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-04T03:03:48.852Z,1543892628.852 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:03:48.866Z,1543892628.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:03:48.867Z,1543892628.867 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:06:05.184Z,1543892765.184 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T03:06:05.184Z,1543892765.184 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T03:06:05.184Z,1543892765.184 [DropWeight](ERROR): Hardware Fault 2018-12-04T03:06:05.238Z,1543892765.238 [CBIT](INFO): Critical error at 20181204T030605 2018-12-04T03:06:05.241Z,1543892765.241 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T03:06:05.241Z,1543892765.241 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T03:06:05.627Z,1543892765.627 [CBIT](INFO): Critical error at 20181204T030605 2018-12-04T03:06:20.011Z,1543892780.011 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T03:06:20.011Z,1543892780.011 [Default:CheckIn:C.Wait] Stopped 2018-12-04T03:06:20.012Z,1543892780.012 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T03:06:20.012Z,1543892780.012 [Default:CheckIn:D] Running Loop=1 2018-12-04T03:06:20.415Z,1543892780.415 [Default:CheckIn:D] Stopped 2018-12-04T03:06:20.415Z,1543892780.415 [Default:CheckIn:E] Running Loop=1 2018-12-04T03:06:20.811Z,1543892780.811 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 351.473210 min 2018-12-04T03:06:20.811Z,1543892780.811 [Default:CheckIn:E] Stopped 2018-12-04T03:06:20.811Z,1543892780.811 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T03:06:20.811Z,1543892780.811 [Default:CheckIn] Stopped 2018-12-04T03:06:20.811Z,1543892780.811 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T03:06:20.811Z,1543892780.811 [Default:CheckIn](INFO): Running loop #35 2018-12-04T03:06:20.811Z,1543892780.811 [Default:CheckIn] Running Loop=35 2018-12-04T03:06:20.812Z,1543892780.812 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T03:06:20.812Z,1543892780.812 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T03:06:21.583Z,1543892781.583 [NAL9602](INFO): Powering up 2018-12-04T03:06:32.788Z,1543892792.788 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:07:04.452Z,1543892824.452 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T03:07:04.526Z,1543892824.526 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T03:07:04.526Z,1543892824.526 [NAL9602] Data Fault, FailCount= 3 2018-12-04T03:07:04.526Z,1543892824.526 [NAL9602](ERROR): Data Fault 2018-12-04T03:07:04.557Z,1543892824.557 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:07:04.848Z,1543892824.848 [NAL9602](INFO): Powering down 2018-12-04T03:07:05.690Z,1543892825.690 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:07:05.690Z,1543892825.690 [NAL9602] No Fault, FailCount= 3 2018-12-04T03:07:35.193Z,1543892855.193 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:07:46.396Z,1543892866.396 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:07:47.196Z,1543892867.196 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T03:07:47.197Z,1543892867.197 [NAL9602] Data Fault, FailCount= 4 2018-12-04T03:07:47.197Z,1543892867.197 [NAL9602](ERROR): Data Fault 2018-12-04T03:07:47.256Z,1543892867.256 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:07:50.296Z,1543892870.296 [NAL9602](INFO): Powering down 2018-12-04T03:07:50.798Z,1543892870.798 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:07:50.798Z,1543892870.798 [NAL9602] No Fault, FailCount= 4 2018-12-04T03:08:20.349Z,1543892900.349 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:08:31.504Z,1543892911.504 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:11:21.371Z,1543893081.371 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T03:06:20.8Z 2018-12-04T03:11:21.371Z,1543893081.371 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T03:11:21.372Z,1543893081.372 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T03:11:26.836Z,1543893086.836 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0102.lzma 2018-12-04T03:11:27.633Z,1543893087.633 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0102.lzma.bak 2018-12-04T03:11:27.633Z,1543893087.633 [DataOverHttps](INFO): SBD MOMSN=8962576 2018-12-04T03:11:36.937Z,1543893096.937 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T03:11:36.991Z,1543893096.991 [DataOverHttps](INFO): Sending 400 bytes from file Logs/20181203T211451/Express0103.lzma 2018-12-04T03:11:37.789Z,1543893097.789 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0103.lzma.bak 2018-12-04T03:11:37.789Z,1543893097.789 [DataOverHttps](INFO): SBD MOMSN=8962580 2018-12-04T03:11:39.075Z,1543893099.075 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T03:11:39.075Z,1543893099.075 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T03:11:39.075Z,1543893099.075 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T03:12:07.233Z,1543893127.233 [NAL9602](INFO): Powering down 2018-12-04T03:16:39.381Z,1543893399.381 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T03:16:39.381Z,1543893399.381 [Default:CheckIn:C.Wait] Stopped 2018-12-04T03:16:39.381Z,1543893399.381 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T03:16:39.381Z,1543893399.381 [Default:CheckIn:D] Running Loop=1 2018-12-04T03:16:39.773Z,1543893399.773 [Default:CheckIn:D] Stopped 2018-12-04T03:16:39.773Z,1543893399.773 [Default:CheckIn:E] Running Loop=1 2018-12-04T03:16:40.177Z,1543893400.177 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 361.795866 min 2018-12-04T03:16:40.177Z,1543893400.177 [Default:CheckIn:E] Stopped 2018-12-04T03:16:40.177Z,1543893400.177 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T03:16:40.177Z,1543893400.177 [Default:CheckIn] Stopped 2018-12-04T03:16:40.178Z,1543893400.178 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T03:16:40.178Z,1543893400.178 [Default:CheckIn](INFO): Running loop #36 2018-12-04T03:16:40.178Z,1543893400.178 [Default:CheckIn] Running Loop=36 2018-12-04T03:16:40.178Z,1543893400.178 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T03:16:40.178Z,1543893400.178 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T03:16:40.949Z,1543893400.949 [NAL9602](INFO): Powering up 2018-12-04T03:16:52.156Z,1543893412.156 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:17:24.108Z,1543893444.108 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T03:17:24.182Z,1543893444.182 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T03:17:24.182Z,1543893444.182 [NAL9602] Data Fault, FailCount= 5 2018-12-04T03:17:24.182Z,1543893444.182 [NAL9602](ERROR): Data Fault 2018-12-04T03:17:24.259Z,1543893444.259 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:17:24.259Z,1543893444.259 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T03:17:24.504Z,1543893444.504 [NAL9602](INFO): Powering down 2018-12-04T03:17:24.546Z,1543893444.546 [CBIT](INFO): Critical error at 20181204T031724 2018-12-04T03:18:48.626Z,1543893528.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:18:48.626Z,1543893528.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-04T03:18:49.013Z,1543893529.013 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:18:49.014Z,1543893529.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:18:49.014Z,1543893529.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:18:49.027Z,1543893529.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:18:49.027Z,1543893529.027 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-04T03:18:49.412Z,1543893529.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:18:49.412Z,1543893529.412 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:18:49.413Z,1543893529.413 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:19:24.313Z,1543893564.313 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:19:24.313Z,1543893564.313 [NAL9602] No Fault, FailCount= 5 2018-12-04T03:19:24.668Z,1543893564.668 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:19:35.868Z,1543893575.868 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:19:36.668Z,1543893576.668 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T03:19:36.668Z,1543893576.668 [NAL9602] Data Fault, FailCount= 1 2018-12-04T03:19:36.668Z,1543893576.668 [NAL9602](ERROR): Data Fault 2018-12-04T03:19:36.720Z,1543893576.720 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:19:37.065Z,1543893577.065 [NAL9602](INFO): Powering down 2018-12-04T03:19:37.909Z,1543893577.909 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:19:37.909Z,1543893577.909 [NAL9602] No Fault, FailCount= 1 2018-12-04T03:20:07.437Z,1543893607.437 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:20:18.239Z,1543893618.239 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:20:49.036Z,1543893649.036 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:20:49.036Z,1543893649.036 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-04T03:20:49.036Z,1543893649.036 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:20:49.050Z,1543893649.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:20:49.438Z,1543893649.438 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:20:49.438Z,1543893649.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-04T03:20:49.438Z,1543893649.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:20:49.452Z,1543893649.452 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:20:49.452Z,1543893649.452 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:20:49.452Z,1543893649.452 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-04T03:20:49.832Z,1543893649.832 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:20:49.833Z,1543893649.833 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:20:49.833Z,1543893649.833 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:20:49.846Z,1543893649.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:20:49.846Z,1543893649.846 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-04T03:20:50.229Z,1543893650.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:20:50.230Z,1543893650.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:20:50.231Z,1543893650.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:21:06.162Z,1543893666.162 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T03:21:06.162Z,1543893666.162 [DropWeight] No Fault, FailCount= 1 2018-12-04T03:21:41.323Z,1543893701.323 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T03:16:40.2Z 2018-12-04T03:21:41.323Z,1543893701.323 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T03:21:41.323Z,1543893701.323 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T03:21:46.344Z,1543893706.344 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0105.lzma 2018-12-04T03:21:47.145Z,1543893707.145 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0105.lzma.bak 2018-12-04T03:21:47.145Z,1543893707.145 [DataOverHttps](INFO): SBD MOMSN=8962644 2018-12-04T03:21:56.987Z,1543893716.987 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T03:21:57.045Z,1543893717.045 [DataOverHttps](INFO): Sending 308 bytes from file Logs/20181203T211451/Express0106.lzma 2018-12-04T03:21:57.845Z,1543893717.845 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0106.lzma.bak 2018-12-04T03:21:57.845Z,1543893717.845 [DataOverHttps](INFO): SBD MOMSN=8962647 2018-12-04T03:21:59.130Z,1543893719.130 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T03:21:59.130Z,1543893719.130 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T03:21:59.130Z,1543893719.130 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T03:22:27.200Z,1543893747.200 [NAL9602](INFO): Powering down 2018-12-04T03:22:50.001Z,1543893770.001 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:22:50.001Z,1543893770.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-04T03:22:50.001Z,1543893770.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:22:50.015Z,1543893770.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:22:50.406Z,1543893770.406 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:22:50.406Z,1543893770.406 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-04T03:22:50.406Z,1543893770.406 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:22:50.420Z,1543893770.420 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:22:50.420Z,1543893770.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:22:50.420Z,1543893770.420 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-04T03:22:50.806Z,1543893770.806 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:22:50.806Z,1543893770.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:22:50.807Z,1543893770.807 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:22:50.819Z,1543893770.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:22:50.820Z,1543893770.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-04T03:22:51.202Z,1543893771.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:22:51.202Z,1543893771.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:22:51.202Z,1543893771.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:24:50.820Z,1543893890.820 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:24:50.821Z,1543893890.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-04T03:24:50.821Z,1543893890.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:24:50.835Z,1543893890.835 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:24:51.221Z,1543893891.221 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:24:51.221Z,1543893891.221 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-04T03:24:51.221Z,1543893891.221 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:24:51.234Z,1543893891.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:24:51.234Z,1543893891.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:24:51.235Z,1543893891.235 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-04T03:24:51.626Z,1543893891.626 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:24:51.626Z,1543893891.626 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:24:51.627Z,1543893891.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:24:51.640Z,1543893891.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:24:51.640Z,1543893891.640 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-04T03:24:52.020Z,1543893892.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:24:52.021Z,1543893892.021 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:24:52.021Z,1543893892.021 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:26:51.981Z,1543894011.981 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:26:51.982Z,1543894011.982 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-04T03:26:51.982Z,1543894011.982 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:26:52.014Z,1543894012.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:26:52.382Z,1543894012.382 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:26:52.382Z,1543894012.382 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-04T03:26:52.382Z,1543894012.382 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:26:52.411Z,1543894012.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:26:52.411Z,1543894012.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:26:52.411Z,1543894012.411 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-04T03:26:52.801Z,1543894012.801 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:26:52.802Z,1543894012.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:26:52.802Z,1543894012.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:26:52.815Z,1543894012.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:26:52.815Z,1543894012.815 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-04T03:26:53.180Z,1543894013.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:26:53.180Z,1543894013.180 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:26:53.180Z,1543894013.180 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:26:59.590Z,1543894019.590 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T03:26:59.612Z,1543894019.612 [Default:CheckIn:C.Wait] Stopped 2018-12-04T03:26:59.612Z,1543894019.612 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T03:26:59.613Z,1543894019.613 [Default:CheckIn:D] Running Loop=1 2018-12-04T03:26:59.994Z,1543894019.994 [Default:CheckIn:D] Stopped 2018-12-04T03:26:59.995Z,1543894019.995 [Default:CheckIn:E] Running Loop=1 2018-12-04T03:27:00.390Z,1543894020.390 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 372.132878 min 2018-12-04T03:27:00.390Z,1543894020.390 [Default:CheckIn:E] Stopped 2018-12-04T03:27:00.390Z,1543894020.390 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T03:27:00.390Z,1543894020.390 [Default:CheckIn] Stopped 2018-12-04T03:27:00.391Z,1543894020.391 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T03:27:00.391Z,1543894020.391 [Default:CheckIn](INFO): Running loop #37 2018-12-04T03:27:00.391Z,1543894020.391 [Default:CheckIn] Running Loop=37 2018-12-04T03:27:00.391Z,1543894020.391 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T03:27:00.391Z,1543894020.391 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T03:27:01.167Z,1543894021.167 [NAL9602](INFO): Powering up 2018-12-04T03:27:12.364Z,1543894032.364 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:27:44.096Z,1543894064.096 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T03:27:44.178Z,1543894064.178 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T03:27:44.178Z,1543894064.178 [NAL9602] Data Fault, FailCount= 2 2018-12-04T03:27:44.178Z,1543894064.178 [NAL9602](ERROR): Data Fault 2018-12-04T03:27:44.218Z,1543894064.218 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:27:44.496Z,1543894064.496 [NAL9602](INFO): Powering down 2018-12-04T03:27:45.352Z,1543894065.352 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:27:45.352Z,1543894065.352 [NAL9602] No Fault, FailCount= 2 2018-12-04T03:28:14.516Z,1543894094.516 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:28:25.720Z,1543894105.720 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:28:52.988Z,1543894132.988 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:28:52.988Z,1543894132.988 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-04T03:28:52.988Z,1543894132.988 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:28:53.005Z,1543894133.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:28:53.385Z,1543894133.385 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:28:53.385Z,1543894133.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-04T03:28:53.385Z,1543894133.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:28:53.401Z,1543894133.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:28:53.401Z,1543894133.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:28:53.401Z,1543894133.401 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-04T03:28:53.770Z,1543894133.770 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:28:53.770Z,1543894133.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:28:53.771Z,1543894133.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:28:53.820Z,1543894133.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:28:53.820Z,1543894133.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-04T03:28:54.171Z,1543894134.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:28:54.171Z,1543894134.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:28:54.172Z,1543894134.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:30:54.059Z,1543894254.059 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:30:54.060Z,1543894254.060 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-04T03:30:54.060Z,1543894254.060 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:30:54.112Z,1543894254.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:30:54.448Z,1543894254.448 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:30:54.448Z,1543894254.448 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-04T03:30:54.448Z,1543894254.448 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:30:54.462Z,1543894254.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:30:54.462Z,1543894254.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:30:54.462Z,1543894254.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-04T03:30:54.854Z,1543894254.854 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:30:54.854Z,1543894254.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:30:54.855Z,1543894254.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:30:54.867Z,1543894254.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:30:54.868Z,1543894254.868 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-04T03:30:55.258Z,1543894255.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:30:55.259Z,1543894255.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:30:55.259Z,1543894255.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:32:01.255Z,1543894321.255 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T03:27:00.4Z 2018-12-04T03:32:01.255Z,1543894321.255 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T03:32:01.255Z,1543894321.255 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T03:32:06.161Z,1543894326.161 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0108.lzma 2018-12-04T03:32:06.943Z,1543894326.943 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0108.lzma.bak 2018-12-04T03:32:06.943Z,1543894326.943 [DataOverHttps](INFO): SBD MOMSN=8962668 2018-12-04T03:32:16.239Z,1543894336.239 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T03:32:16.324Z,1543894336.324 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20181203T211451/Express0109.lzma 2018-12-04T03:32:17.109Z,1543894337.109 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0109.lzma.bak 2018-12-04T03:32:17.109Z,1543894337.109 [DataOverHttps](INFO): SBD MOMSN=8962670 2018-12-04T03:32:18.397Z,1543894338.397 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T03:32:18.397Z,1543894338.397 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T03:32:18.398Z,1543894338.398 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T03:32:46.407Z,1543894366.407 [NAL9602](INFO): Powering down 2018-12-04T03:32:57.281Z,1543894377.281 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:32:57.281Z,1543894377.281 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-04T03:32:57.282Z,1543894377.282 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:32:57.284Z,1543894377.284 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:32:57.284Z,1543894377.284 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-04T03:32:57.284Z,1543894377.284 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:32:57.327Z,1543894377.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:32:57.328Z,1543894377.328 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:32:57.414Z,1543894377.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:32:57.414Z,1543894377.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-04T03:32:57.415Z,1543894377.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:32:57.415Z,1543894377.415 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-04T03:32:57.774Z,1543894377.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:32:57.775Z,1543894377.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:32:57.775Z,1543894377.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:32:57.775Z,1543894377.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:32:57.776Z,1543894377.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:32:57.776Z,1543894377.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:34:57.858Z,1543894497.858 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:34:57.859Z,1543894497.859 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-04T03:34:57.859Z,1543894497.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:34:57.861Z,1543894497.861 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:34:57.861Z,1543894497.861 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-04T03:34:57.861Z,1543894497.861 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:34:57.874Z,1543894497.874 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:34:57.874Z,1543894497.874 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:34:58.266Z,1543894498.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:34:58.266Z,1543894498.266 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-04T03:34:58.266Z,1543894498.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:34:58.266Z,1543894498.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-04T03:34:58.658Z,1543894498.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:34:58.658Z,1543894498.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:34:58.659Z,1543894498.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:34:58.659Z,1543894498.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:34:58.659Z,1543894498.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:34:58.660Z,1543894498.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:36:58.926Z,1543894618.926 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:36:58.927Z,1543894618.927 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-04T03:36:58.927Z,1543894618.927 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:36:58.929Z,1543894618.929 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:36:58.929Z,1543894618.929 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-04T03:36:58.929Z,1543894618.929 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:36:58.943Z,1543894618.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:36:58.943Z,1543894618.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:36:59.342Z,1543894619.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:36:59.342Z,1543894619.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-04T03:36:59.343Z,1543894619.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:36:59.343Z,1543894619.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-04T03:36:59.722Z,1543894619.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:36:59.723Z,1543894619.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:36:59.723Z,1543894619.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:36:59.723Z,1543894619.723 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:36:59.724Z,1543894619.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:36:59.724Z,1543894619.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:37:18.678Z,1543894638.678 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T03:37:18.678Z,1543894638.678 [Default:CheckIn:C.Wait] Stopped 2018-12-04T03:37:18.678Z,1543894638.678 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T03:37:18.679Z,1543894638.679 [Default:CheckIn:D] Running Loop=1 2018-12-04T03:37:19.075Z,1543894639.075 [Default:CheckIn:D] Stopped 2018-12-04T03:37:19.075Z,1543894639.075 [Default:CheckIn:E] Running Loop=1 2018-12-04T03:37:19.478Z,1543894639.478 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 382.450879 min 2018-12-04T03:37:19.479Z,1543894639.479 [Default:CheckIn:E] Stopped 2018-12-04T03:37:19.479Z,1543894639.479 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T03:37:19.479Z,1543894639.479 [Default:CheckIn] Stopped 2018-12-04T03:37:19.479Z,1543894639.479 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T03:37:19.480Z,1543894639.480 [Default:CheckIn](INFO): Running loop #38 2018-12-04T03:37:19.480Z,1543894639.480 [Default:CheckIn] Running Loop=38 2018-12-04T03:37:19.480Z,1543894639.480 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T03:37:19.480Z,1543894639.480 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T03:37:20.241Z,1543894640.241 [NAL9602](INFO): Powering up 2018-12-04T03:37:31.444Z,1543894651.444 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:37:32.242Z,1543894652.242 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T03:37:32.242Z,1543894652.242 [NAL9602] Data Fault, FailCount= 3 2018-12-04T03:37:32.242Z,1543894652.242 [NAL9602](ERROR): Data Fault 2018-12-04T03:37:32.300Z,1543894652.300 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:37:32.644Z,1543894652.644 [NAL9602](INFO): Powering down 2018-12-04T03:37:33.499Z,1543894653.499 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:37:33.499Z,1543894653.499 [NAL9602] No Fault, FailCount= 3 2018-12-04T03:38:02.669Z,1543894682.669 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:38:14.640Z,1543894694.640 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:38:59.854Z,1543894739.854 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:38:59.855Z,1543894739.855 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-04T03:38:59.855Z,1543894739.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:38:59.857Z,1543894739.857 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:38:59.857Z,1543894739.857 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-04T03:38:59.857Z,1543894739.857 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:38:59.870Z,1543894739.870 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:38:59.871Z,1543894739.871 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:39:00.268Z,1543894740.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:39:00.268Z,1543894740.268 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-04T03:39:00.268Z,1543894740.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:39:00.268Z,1543894740.268 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-04T03:39:00.666Z,1543894740.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:39:00.666Z,1543894740.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:39:00.667Z,1543894740.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:39:00.667Z,1543894740.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:39:00.668Z,1543894740.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:39:00.668Z,1543894740.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:41:01.067Z,1543894861.067 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:41:01.067Z,1543894861.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-04T03:41:01.067Z,1543894861.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:41:01.069Z,1543894861.069 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:41:01.070Z,1543894861.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-04T03:41:01.070Z,1543894861.070 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:41:01.083Z,1543894861.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:41:01.084Z,1543894861.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:41:01.480Z,1543894861.480 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:41:01.480Z,1543894861.480 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-04T03:41:01.481Z,1543894861.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:41:01.481Z,1543894861.481 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-04T03:41:01.882Z,1543894861.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:41:01.882Z,1543894861.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:41:01.883Z,1543894861.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:41:01.883Z,1543894861.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:41:01.883Z,1543894861.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:41:01.884Z,1543894861.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:42:20.658Z,1543894940.658 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T03:37:19.5Z 2018-12-04T03:42:20.659Z,1543894940.659 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T03:42:20.659Z,1543894940.659 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T03:42:25.565Z,1543894945.565 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0111.lzma 2018-12-04T03:42:26.344Z,1543894946.344 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0111.lzma.bak 2018-12-04T03:42:26.344Z,1543894946.344 [DataOverHttps](INFO): SBD MOMSN=8962700 2018-12-04T03:42:35.832Z,1543894955.832 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0112.lzma 2018-12-04T03:42:37.411Z,1543894957.411 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0112.lzma.bak 2018-12-04T03:42:37.414Z,1543894957.414 [DataOverHttps](INFO): SBD MOMSN=8962702 2018-12-04T03:42:38.699Z,1543894958.699 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T03:42:38.699Z,1543894958.699 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T03:42:38.699Z,1543894958.699 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T03:43:01.977Z,1543894981.977 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:43:01.977Z,1543894981.977 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-04T03:43:01.978Z,1543894981.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:43:01.980Z,1543894981.980 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:43:01.980Z,1543894981.980 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-04T03:43:01.980Z,1543894981.980 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:43:01.993Z,1543894981.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:43:01.993Z,1543894981.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:43:02.398Z,1543894982.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:43:02.398Z,1543894982.398 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-04T03:43:02.399Z,1543894982.399 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:43:02.399Z,1543894982.399 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-04T03:43:02.790Z,1543894982.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:43:02.790Z,1543894982.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:43:02.791Z,1543894982.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:43:02.791Z,1543894982.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:43:02.792Z,1543894982.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:43:02.792Z,1543894982.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:43:17.864Z,1543894997.864 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T03:43:48.624Z,1543895028.624 [NAL9602](INFO): Powering down 2018-12-04T03:45:03.015Z,1543895103.015 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:45:03.015Z,1543895103.015 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-04T03:45:03.015Z,1543895103.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:45:03.017Z,1543895103.017 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:45:03.017Z,1543895103.017 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-04T03:45:03.017Z,1543895103.017 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:45:03.031Z,1543895103.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:45:03.031Z,1543895103.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:45:03.163Z,1543895103.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:45:03.163Z,1543895103.163 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-04T03:45:03.163Z,1543895103.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:45:03.163Z,1543895103.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-04T03:45:03.474Z,1543895103.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:45:03.474Z,1543895103.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:45:03.475Z,1543895103.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:45:03.475Z,1543895103.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:45:03.476Z,1543895103.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:45:03.476Z,1543895103.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:47:03.514Z,1543895223.514 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:47:03.514Z,1543895223.514 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-04T03:47:03.514Z,1543895223.514 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:47:03.516Z,1543895223.516 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:47:03.516Z,1543895223.516 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-04T03:47:03.516Z,1543895223.516 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:47:03.551Z,1543895223.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:47:03.551Z,1543895223.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:47:03.957Z,1543895223.957 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:47:03.958Z,1543895223.958 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-04T03:47:03.958Z,1543895223.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:47:03.958Z,1543895223.958 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-04T03:47:04.318Z,1543895224.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:47:04.318Z,1543895224.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:47:04.319Z,1543895224.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:47:04.319Z,1543895224.319 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:47:04.319Z,1543895224.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:47:04.320Z,1543895224.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:47:39.125Z,1543895259.125 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T03:47:39.125Z,1543895259.125 [Default:CheckIn:C.Wait] Stopped 2018-12-04T03:47:39.125Z,1543895259.125 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T03:47:39.125Z,1543895259.125 [Default:CheckIn:D] Running Loop=1 2018-12-04T03:47:39.530Z,1543895259.530 [Default:CheckIn:D] Stopped 2018-12-04T03:47:39.530Z,1543895259.530 [Default:CheckIn:E] Running Loop=1 2018-12-04T03:47:39.927Z,1543895259.927 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 392.791797 min 2018-12-04T03:47:39.927Z,1543895259.927 [Default:CheckIn:E] Stopped 2018-12-04T03:47:39.927Z,1543895259.927 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T03:47:39.927Z,1543895259.927 [Default:CheckIn] Stopped 2018-12-04T03:47:39.927Z,1543895259.927 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T03:47:39.928Z,1543895259.928 [Default:CheckIn](INFO): Running loop #39 2018-12-04T03:47:39.928Z,1543895259.928 [Default:CheckIn] Running Loop=39 2018-12-04T03:47:39.928Z,1543895259.928 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T03:47:39.928Z,1543895259.928 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T03:47:40.703Z,1543895260.703 [NAL9602](INFO): Powering up 2018-12-04T03:47:51.903Z,1543895271.903 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:48:23.532Z,1543895303.532 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T03:48:23.610Z,1543895303.610 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T03:48:23.610Z,1543895303.610 [NAL9602] Data Fault, FailCount= 4 2018-12-04T03:48:23.611Z,1543895303.611 [NAL9602](ERROR): Data Fault 2018-12-04T03:48:23.648Z,1543895303.648 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:48:23.932Z,1543895303.932 [NAL9602](INFO): Powering down 2018-12-04T03:48:24.786Z,1543895304.786 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:48:24.786Z,1543895304.786 [NAL9602] No Fault, FailCount= 4 2018-12-04T03:48:54.297Z,1543895334.297 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:49:04.322Z,1543895344.322 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:49:04.340Z,1543895344.340 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-04T03:49:04.340Z,1543895344.340 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:49:04.342Z,1543895344.342 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:49:04.342Z,1543895344.342 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-04T03:49:04.343Z,1543895344.343 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:49:04.356Z,1543895344.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:49:04.356Z,1543895344.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:49:04.754Z,1543895344.754 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:49:04.754Z,1543895344.754 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-04T03:49:04.754Z,1543895344.754 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:49:04.755Z,1543895344.755 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-04T03:49:05.100Z,1543895345.100 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:49:05.126Z,1543895345.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:49:05.145Z,1543895345.145 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:49:05.145Z,1543895345.145 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:49:05.145Z,1543895345.145 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:49:05.146Z,1543895345.146 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:49:05.146Z,1543895345.146 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:49:05.904Z,1543895345.904 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T03:49:05.904Z,1543895345.904 [NAL9602] Data Fault, FailCount= 5 2018-12-04T03:49:05.904Z,1543895345.904 [NAL9602](ERROR): Data Fault 2018-12-04T03:49:05.976Z,1543895345.976 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:49:05.976Z,1543895345.976 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T03:49:06.300Z,1543895346.300 [NAL9602](INFO): Powering down 2018-12-04T03:49:06.366Z,1543895346.366 [CBIT](INFO): Critical error at 20181204T034905 2018-12-04T03:49:11.472Z,1543895351.472 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size. 2018-12-04T03:49:17.085Z,1543895357.085 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size. 2018-12-04T03:51:05.391Z,1543895465.391 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:51:05.391Z,1543895465.391 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-04T03:51:05.391Z,1543895465.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:51:05.393Z,1543895465.393 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:51:05.394Z,1543895465.394 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-04T03:51:05.394Z,1543895465.394 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:51:05.428Z,1543895465.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:51:05.428Z,1543895465.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:51:05.830Z,1543895465.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:51:05.830Z,1543895465.830 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-04T03:51:05.830Z,1543895465.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:51:05.831Z,1543895465.831 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-04T03:51:06.198Z,1543895466.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:51:06.205Z,1543895466.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:51:06.206Z,1543895466.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:51:06.206Z,1543895466.206 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:51:06.207Z,1543895466.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:51:06.207Z,1543895466.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:51:06.248Z,1543895466.248 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:51:06.248Z,1543895466.248 [NAL9602] No Fault, FailCount= 5 2018-12-04T03:51:06.575Z,1543895466.575 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:51:07.371Z,1543895467.371 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T03:51:07.371Z,1543895467.371 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T03:51:07.371Z,1543895467.371 [DropWeight](ERROR): Hardware Fault 2018-12-04T03:51:07.550Z,1543895467.550 [CBIT](INFO): Critical error at 20181204T035107 2018-12-04T03:51:07.553Z,1543895467.553 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T03:51:07.553Z,1543895467.553 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T03:51:07.835Z,1543895467.835 [CBIT](INFO): Critical error at 20181204T035107 2018-12-04T03:51:17.767Z,1543895477.767 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:52:40.477Z,1543895560.477 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T03:47:39.9Z 2018-12-04T03:52:40.477Z,1543895560.477 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T03:52:40.477Z,1543895560.477 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T03:52:45.512Z,1543895565.512 [DataOverHttps](INFO): Sending 125 bytes from file Logs/20181203T211451/Courier0114.lzma 2018-12-04T03:52:46.313Z,1543895566.313 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0114.lzma.bak 2018-12-04T03:52:46.313Z,1543895566.313 [DataOverHttps](INFO): SBD MOMSN=8962730 2018-12-04T03:52:55.620Z,1543895575.620 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T03:52:55.752Z,1543895575.752 [DataOverHttps](INFO): Sending 343 bytes from file Logs/20181203T211451/Express0115.lzma 2018-12-04T03:52:56.545Z,1543895576.545 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0115.lzma.bak 2018-12-04T03:52:56.545Z,1543895576.545 [DataOverHttps](INFO): SBD MOMSN=8962735 2018-12-04T03:52:57.833Z,1543895577.833 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T03:52:57.833Z,1543895577.833 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T03:52:57.833Z,1543895577.833 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T03:53:06.438Z,1543895586.438 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:53:06.438Z,1543895586.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-04T03:53:06.438Z,1543895586.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:53:06.440Z,1543895586.440 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:53:06.441Z,1543895586.441 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-04T03:53:06.441Z,1543895586.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:53:06.454Z,1543895586.454 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:53:06.454Z,1543895586.454 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:53:06.853Z,1543895586.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:53:06.853Z,1543895586.853 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-04T03:53:06.854Z,1543895586.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:53:06.854Z,1543895586.854 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-04T03:53:07.241Z,1543895587.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:53:07.242Z,1543895587.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:53:07.242Z,1543895587.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:53:07.243Z,1543895587.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:53:07.243Z,1543895587.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:53:07.243Z,1543895587.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:53:26.007Z,1543895606.007 [NAL9602](INFO): Powering down 2018-12-04T03:55:07.334Z,1543895707.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:55:07.334Z,1543895707.334 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-04T03:55:07.334Z,1543895707.334 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:55:07.337Z,1543895707.337 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:55:07.337Z,1543895707.337 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-04T03:55:07.337Z,1543895707.337 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:55:07.350Z,1543895707.350 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:55:07.351Z,1543895707.351 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:55:07.746Z,1543895707.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:55:07.746Z,1543895707.746 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-04T03:55:07.747Z,1543895707.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:55:07.747Z,1543895707.747 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-04T03:55:08.137Z,1543895708.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:55:08.137Z,1543895708.137 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:55:08.138Z,1543895708.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:55:08.138Z,1543895708.138 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:55:08.138Z,1543895708.138 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:55:08.139Z,1543895708.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:55:41.303Z,1543895741.303 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T03:57:08.310Z,1543895828.310 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:57:08.310Z,1543895828.310 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-04T03:57:08.310Z,1543895828.310 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:57:08.312Z,1543895828.312 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:57:08.312Z,1543895828.312 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-04T03:57:08.313Z,1543895828.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:57:08.326Z,1543895828.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:57:08.326Z,1543895828.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:57:08.717Z,1543895828.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:57:08.717Z,1543895828.717 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-04T03:57:08.717Z,1543895828.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:57:08.717Z,1543895828.717 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-04T03:57:09.110Z,1543895829.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:57:09.110Z,1543895829.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:57:09.111Z,1543895829.111 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:57:09.111Z,1543895829.111 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:57:09.111Z,1543895829.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:57:09.112Z,1543895829.112 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:57:58.256Z,1543895878.256 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T03:57:58.256Z,1543895878.256 [Default:CheckIn:C.Wait] Stopped 2018-12-04T03:57:58.256Z,1543895878.256 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T03:57:58.256Z,1543895878.256 [Default:CheckIn:D] Running Loop=1 2018-12-04T03:57:58.660Z,1543895878.660 [Default:CheckIn:D] Stopped 2018-12-04T03:57:58.660Z,1543895878.660 [Default:CheckIn:E] Running Loop=1 2018-12-04T03:57:59.064Z,1543895879.064 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 403.110645 min 2018-12-04T03:57:59.064Z,1543895879.064 [Default:CheckIn:E] Stopped 2018-12-04T03:57:59.064Z,1543895879.064 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T03:57:59.065Z,1543895879.065 [Default:CheckIn] Stopped 2018-12-04T03:57:59.065Z,1543895879.065 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T03:57:59.065Z,1543895879.065 [Default:CheckIn](INFO): Running loop #40 2018-12-04T03:57:59.065Z,1543895879.065 [Default:CheckIn] Running Loop=40 2018-12-04T03:57:59.065Z,1543895879.065 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T03:57:59.065Z,1543895879.065 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T03:57:59.831Z,1543895879.831 [NAL9602](INFO): Powering up 2018-12-04T03:58:11.032Z,1543895891.032 [NAL9602](INFO): NAL9602 initialized 2018-12-04T03:58:42.987Z,1543895922.987 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T03:58:43.071Z,1543895923.070 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T03:58:43.071Z,1543895923.071 [NAL9602] Data Fault, FailCount= 1 2018-12-04T03:58:43.071Z,1543895923.071 [NAL9602](ERROR): Data Fault 2018-12-04T03:58:43.133Z,1543895923.133 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T03:58:43.387Z,1543895923.387 [NAL9602](INFO): Powering down 2018-12-04T03:58:44.288Z,1543895924.288 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T03:58:44.289Z,1543895924.289 [NAL9602] No Fault, FailCount= 1 2018-12-04T03:59:09.373Z,1543895949.373 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:59:09.373Z,1543895949.373 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-04T03:59:09.373Z,1543895949.373 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T03:59:09.376Z,1543895949.376 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T03:59:09.376Z,1543895949.376 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-04T03:59:09.376Z,1543895949.376 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T03:59:09.389Z,1543895949.389 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T03:59:09.389Z,1543895949.389 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T03:59:09.784Z,1543895949.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T03:59:09.784Z,1543895949.784 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-04T03:59:09.785Z,1543895949.785 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T03:59:09.785Z,1543895949.785 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-04T03:59:10.171Z,1543895950.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T03:59:10.172Z,1543895950.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:59:10.172Z,1543895950.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:59:10.172Z,1543895950.172 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T03:59:10.173Z,1543895950.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T03:59:10.173Z,1543895950.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T03:59:13.747Z,1543895953.747 [NAL9602](INFO): Powering up NAL9602 2018-12-04T03:59:24.548Z,1543895964.548 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:01:10.413Z,1543896070.413 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:01:10.413Z,1543896070.413 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-04T04:01:10.413Z,1543896070.413 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:01:10.415Z,1543896070.415 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:01:10.415Z,1543896070.415 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-04T04:01:10.415Z,1543896070.415 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:01:10.429Z,1543896070.429 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:01:10.430Z,1543896070.430 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:01:10.826Z,1543896070.826 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:01:10.826Z,1543896070.826 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-04T04:01:10.853Z,1543896070.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:01:10.853Z,1543896070.853 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-04T04:01:11.221Z,1543896071.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:01:11.222Z,1543896071.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:01:11.222Z,1543896071.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:01:11.222Z,1543896071.222 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:01:11.223Z,1543896071.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:01:11.223Z,1543896071.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:02:59.917Z,1543896179.917 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T03:57:59.1Z 2018-12-04T04:02:59.917Z,1543896179.917 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T04:02:59.918Z,1543896179.918 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T04:03:04.830Z,1543896184.830 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0117.lzma 2018-12-04T04:03:05.617Z,1543896185.617 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0117.lzma.bak 2018-12-04T04:03:05.617Z,1543896185.617 [DataOverHttps](INFO): SBD MOMSN=8962766 2018-12-04T04:03:11.329Z,1543896191.329 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:03:11.329Z,1543896191.329 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-04T04:03:11.329Z,1543896191.329 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:03:11.333Z,1543896191.333 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:03:11.333Z,1543896191.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-04T04:03:11.333Z,1543896191.333 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:03:11.347Z,1543896191.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:03:11.347Z,1543896191.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:03:11.752Z,1543896191.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:03:11.753Z,1543896191.753 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-04T04:03:11.753Z,1543896191.753 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:03:11.753Z,1543896191.753 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-04T04:03:14.966Z,1543896194.966 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T04:03:14.985Z,1543896194.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:03:14.985Z,1543896194.985 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:03:14.985Z,1543896194.985 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:03:14.986Z,1543896194.986 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:03:14.986Z,1543896194.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:03:14.987Z,1543896194.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:03:15.045Z,1543896195.045 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20181203T211451/Express0118.lzma 2018-12-04T04:03:15.814Z,1543896195.814 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0118.lzma.bak 2018-12-04T04:03:15.815Z,1543896195.815 [DataOverHttps](INFO): SBD MOMSN=8962768 2018-12-04T04:03:17.145Z,1543896197.145 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T04:03:17.145Z,1543896197.145 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T04:03:17.145Z,1543896197.145 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T04:03:45.127Z,1543896225.127 [NAL9602](INFO): Powering down 2018-12-04T04:05:15.167Z,1543896315.167 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:05:15.167Z,1543896315.167 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-04T04:05:15.167Z,1543896315.167 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:05:15.170Z,1543896315.170 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:05:15.170Z,1543896315.170 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-04T04:05:15.170Z,1543896315.170 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:05:15.183Z,1543896315.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:05:15.184Z,1543896315.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:05:15.586Z,1543896315.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:05:15.587Z,1543896315.587 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-04T04:05:15.587Z,1543896315.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:05:15.587Z,1543896315.587 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-04T04:05:15.969Z,1543896315.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:05:15.969Z,1543896315.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:05:15.969Z,1543896315.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:05:15.970Z,1543896315.970 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:05:15.970Z,1543896315.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:05:15.971Z,1543896315.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:06:07.599Z,1543896367.599 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T04:06:07.599Z,1543896367.599 [DropWeight] No Fault, FailCount= 1 2018-12-04T04:07:16.340Z,1543896436.340 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:07:16.340Z,1543896436.340 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-04T04:07:16.340Z,1543896436.340 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:07:16.342Z,1543896436.342 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:07:16.342Z,1543896436.342 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-04T04:07:16.342Z,1543896436.342 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:07:16.356Z,1543896436.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:07:16.356Z,1543896436.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:07:16.757Z,1543896436.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:07:16.757Z,1543896436.757 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-04T04:07:16.757Z,1543896436.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:07:16.757Z,1543896436.757 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-04T04:07:17.150Z,1543896437.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:07:17.150Z,1543896437.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:07:17.151Z,1543896437.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:07:17.151Z,1543896437.151 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:07:17.151Z,1543896437.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:07:17.152Z,1543896437.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:08:17.506Z,1543896497.506 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T04:08:17.506Z,1543896497.506 [Default:CheckIn:C.Wait] Stopped 2018-12-04T04:08:17.506Z,1543896497.506 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T04:08:17.506Z,1543896497.506 [Default:CheckIn:D] Running Loop=1 2018-12-04T04:08:17.906Z,1543896497.906 [Default:CheckIn:D] Stopped 2018-12-04T04:08:17.906Z,1543896497.906 [Default:CheckIn:E] Running Loop=1 2018-12-04T04:08:18.321Z,1543896498.321 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 413.431413 min 2018-12-04T04:08:18.322Z,1543896498.322 [Default:CheckIn:E] Stopped 2018-12-04T04:08:18.322Z,1543896498.322 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T04:08:18.322Z,1543896498.322 [Default:CheckIn] Stopped 2018-12-04T04:08:18.322Z,1543896498.322 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T04:08:18.322Z,1543896498.322 [Default:CheckIn](INFO): Running loop #41 2018-12-04T04:08:18.322Z,1543896498.322 [Default:CheckIn] Running Loop=41 2018-12-04T04:08:18.323Z,1543896498.323 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T04:08:18.323Z,1543896498.323 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T04:08:19.075Z,1543896499.075 [NAL9602](INFO): Powering up 2018-12-04T04:08:30.276Z,1543896510.276 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:08:31.080Z,1543896511.080 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T04:08:31.080Z,1543896511.080 [NAL9602] Data Fault, FailCount= 2 2018-12-04T04:08:31.080Z,1543896511.080 [NAL9602](ERROR): Data Fault 2018-12-04T04:08:31.138Z,1543896511.138 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T04:08:31.476Z,1543896511.476 [NAL9602](INFO): Powering down 2018-12-04T04:08:32.336Z,1543896512.336 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T04:08:32.336Z,1543896512.336 [NAL9602] No Fault, FailCount= 2 2018-12-04T04:09:01.846Z,1543896541.846 [NAL9602](INFO): Powering up NAL9602 2018-12-04T04:09:13.104Z,1543896553.104 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:09:17.530Z,1543896557.530 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:09:17.530Z,1543896557.530 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-04T04:09:17.530Z,1543896557.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:09:17.532Z,1543896557.532 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:09:17.532Z,1543896557.532 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-04T04:09:17.532Z,1543896557.532 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:09:17.546Z,1543896557.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:09:17.546Z,1543896557.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:09:17.946Z,1543896557.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:09:17.946Z,1543896557.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-04T04:09:17.947Z,1543896557.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:09:17.947Z,1543896557.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-04T04:09:18.334Z,1543896558.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:09:18.334Z,1543896558.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:09:18.335Z,1543896558.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:09:18.335Z,1543896558.335 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:09:18.336Z,1543896558.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:09:18.336Z,1543896558.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:11:18.671Z,1543896678.671 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:11:18.672Z,1543896678.672 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-04T04:11:18.672Z,1543896678.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:11:18.674Z,1543896678.674 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:11:18.674Z,1543896678.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-04T04:11:18.674Z,1543896678.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:11:18.688Z,1543896678.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:11:18.688Z,1543896678.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:11:19.082Z,1543896679.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:11:19.082Z,1543896679.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-04T04:11:19.082Z,1543896679.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:11:19.083Z,1543896679.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-04T04:11:19.474Z,1543896679.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:11:19.474Z,1543896679.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:11:19.475Z,1543896679.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:11:19.475Z,1543896679.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:11:19.476Z,1543896679.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:11:19.476Z,1543896679.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:13:19.115Z,1543896799.115 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T04:08:18.3Z 2018-12-04T04:13:19.116Z,1543896799.116 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T04:13:19.116Z,1543896799.116 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T04:13:20.120Z,1543896800.120 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:13:20.121Z,1543896800.121 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-04T04:13:20.121Z,1543896800.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:13:20.123Z,1543896800.123 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:13:20.123Z,1543896800.123 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-04T04:13:20.123Z,1543896800.123 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:13:20.188Z,1543896800.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:13:20.188Z,1543896800.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:13:20.278Z,1543896800.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:13:20.278Z,1543896800.278 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-04T04:13:20.279Z,1543896800.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:13:20.279Z,1543896800.279 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-04T04:13:20.653Z,1543896800.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:13:20.654Z,1543896800.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:13:20.654Z,1543896800.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:13:20.655Z,1543896800.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:13:20.655Z,1543896800.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:13:20.656Z,1543896800.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:13:24.179Z,1543896804.179 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0120.lzma 2018-12-04T04:13:24.973Z,1543896804.973 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0120.lzma.bak 2018-12-04T04:13:24.973Z,1543896804.973 [DataOverHttps](INFO): SBD MOMSN=8962799 2018-12-04T04:13:34.403Z,1543896814.403 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0121.lzma 2018-12-04T04:13:35.201Z,1543896815.201 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0121.lzma.bak 2018-12-04T04:13:35.201Z,1543896815.201 [DataOverHttps](INFO): SBD MOMSN=8962801 2018-12-04T04:13:36.490Z,1543896816.490 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T04:13:36.490Z,1543896816.490 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T04:13:36.490Z,1543896816.490 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T04:14:16.250Z,1543896856.250 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T04:14:47.007Z,1543896887.007 [NAL9602](INFO): Powering down 2018-12-04T04:15:20.709Z,1543896920.709 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:15:20.709Z,1543896920.709 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-04T04:15:20.709Z,1543896920.709 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:15:20.711Z,1543896920.711 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:15:20.711Z,1543896920.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-04T04:15:20.712Z,1543896920.712 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:15:20.725Z,1543896920.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:15:20.725Z,1543896920.725 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:15:21.126Z,1543896921.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:15:21.126Z,1543896921.126 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-04T04:15:21.127Z,1543896921.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:15:21.127Z,1543896921.127 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-04T04:15:21.514Z,1543896921.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:15:21.514Z,1543896921.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:15:21.515Z,1543896921.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:15:21.515Z,1543896921.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:15:21.515Z,1543896921.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:15:21.516Z,1543896921.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:17:21.744Z,1543897041.744 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:17:21.744Z,1543897041.744 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-04T04:17:21.744Z,1543897041.744 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:17:21.755Z,1543897041.755 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:17:21.755Z,1543897041.755 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-04T04:17:21.755Z,1543897041.755 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:17:21.782Z,1543897041.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:17:21.782Z,1543897041.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:17:22.174Z,1543897042.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:17:22.175Z,1543897042.175 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-04T04:17:22.175Z,1543897042.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:17:22.175Z,1543897042.175 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-04T04:17:22.549Z,1543897042.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:17:22.550Z,1543897042.550 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:17:22.563Z,1543897042.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:17:22.567Z,1543897042.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:17:22.567Z,1543897042.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:17:22.568Z,1543897042.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:18:36.654Z,1543897116.654 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T04:18:36.654Z,1543897116.654 [Default:CheckIn:C.Wait] Stopped 2018-12-04T04:18:36.654Z,1543897116.654 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T04:18:36.654Z,1543897116.654 [Default:CheckIn:D] Running Loop=1 2018-12-04T04:18:37.034Z,1543897117.034 [Default:CheckIn:D] Stopped 2018-12-04T04:18:37.034Z,1543897117.034 [Default:CheckIn:E] Running Loop=1 2018-12-04T04:18:37.438Z,1543897117.438 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 423.750195 min 2018-12-04T04:18:37.438Z,1543897117.438 [Default:CheckIn:E] Stopped 2018-12-04T04:18:37.438Z,1543897117.438 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T04:18:37.439Z,1543897117.439 [Default:CheckIn] Stopped 2018-12-04T04:18:37.439Z,1543897117.439 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T04:18:37.439Z,1543897117.439 [Default:CheckIn](INFO): Running loop #42 2018-12-04T04:18:37.439Z,1543897117.439 [Default:CheckIn] Running Loop=42 2018-12-04T04:18:37.439Z,1543897117.439 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T04:18:37.439Z,1543897117.439 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T04:18:38.227Z,1543897118.227 [NAL9602](INFO): Powering up 2018-12-04T04:18:49.429Z,1543897129.429 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:19:22.649Z,1543897162.649 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:19:22.649Z,1543897162.649 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-04T04:19:22.649Z,1543897162.649 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:19:22.652Z,1543897162.652 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:19:22.652Z,1543897162.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-04T04:19:22.652Z,1543897162.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:19:22.665Z,1543897162.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:19:22.665Z,1543897162.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:19:23.066Z,1543897163.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:19:23.066Z,1543897163.066 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-04T04:19:23.067Z,1543897163.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:19:23.067Z,1543897163.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-04T04:19:23.462Z,1543897163.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:19:23.463Z,1543897163.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:19:23.463Z,1543897163.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:19:23.464Z,1543897163.464 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:19:23.464Z,1543897163.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:19:23.464Z,1543897163.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:21:23.498Z,1543897283.498 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:21:23.498Z,1543897283.498 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-04T04:21:23.499Z,1543897283.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:21:23.501Z,1543897283.501 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:21:23.501Z,1543897283.501 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-04T04:21:23.501Z,1543897283.501 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:21:23.539Z,1543897283.539 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:21:23.539Z,1543897283.539 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:21:23.898Z,1543897283.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:21:23.898Z,1543897283.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-04T04:21:23.899Z,1543897283.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:21:23.899Z,1543897283.899 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-04T04:21:24.290Z,1543897284.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:21:24.290Z,1543897284.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:21:24.291Z,1543897284.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:21:24.291Z,1543897284.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:21:24.291Z,1543897284.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:21:24.292Z,1543897284.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:23:24.317Z,1543897404.317 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:23:24.317Z,1543897404.317 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-04T04:23:24.317Z,1543897404.317 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:23:24.319Z,1543897404.319 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:23:24.319Z,1543897404.319 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-04T04:23:24.319Z,1543897404.319 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:23:24.333Z,1543897404.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:23:24.333Z,1543897404.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:23:24.762Z,1543897404.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:23:24.762Z,1543897404.762 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-04T04:23:24.763Z,1543897404.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:23:24.763Z,1543897404.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-04T04:23:25.118Z,1543897405.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:23:25.118Z,1543897405.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:23:25.119Z,1543897405.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:23:25.119Z,1543897405.119 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:23:25.120Z,1543897405.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:23:25.120Z,1543897405.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:23:38.612Z,1543897418.612 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T04:18:37.4Z 2018-12-04T04:23:38.612Z,1543897418.612 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T04:23:38.612Z,1543897418.612 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T04:23:43.700Z,1543897423.700 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0123.lzma 2018-12-04T04:23:44.501Z,1543897424.501 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0123.lzma.bak 2018-12-04T04:23:44.501Z,1543897424.501 [DataOverHttps](INFO): SBD MOMSN=8962830 2018-12-04T04:23:54.431Z,1543897434.431 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T04:23:54.502Z,1543897434.502 [DataOverHttps](INFO): Sending 297 bytes from file Logs/20181203T211451/Express0124.lzma 2018-12-04T04:23:55.293Z,1543897435.293 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0124.lzma.bak 2018-12-04T04:23:55.293Z,1543897435.293 [DataOverHttps](INFO): SBD MOMSN=8962832 2018-12-04T04:23:56.580Z,1543897436.580 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T04:23:56.580Z,1543897436.580 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T04:23:56.580Z,1543897436.580 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T04:24:24.724Z,1543897464.724 [NAL9602](INFO): Powering down 2018-12-04T04:25:25.170Z,1543897525.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:25:25.170Z,1543897525.170 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-04T04:25:25.171Z,1543897525.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:25:25.173Z,1543897525.173 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:25:25.173Z,1543897525.173 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-04T04:25:25.173Z,1543897525.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:25:25.186Z,1543897525.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:25:25.186Z,1543897525.186 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:25:25.582Z,1543897525.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:25:25.582Z,1543897525.582 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-04T04:25:25.583Z,1543897525.583 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:25:25.583Z,1543897525.583 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-04T04:25:25.970Z,1543897525.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:25:25.971Z,1543897525.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:25:25.971Z,1543897525.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:25:25.971Z,1543897525.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:25:25.972Z,1543897525.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:25:25.972Z,1543897525.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:27:25.988Z,1543897645.988 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:27:25.989Z,1543897645.989 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-04T04:27:25.989Z,1543897645.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:27:25.991Z,1543897645.991 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:27:25.991Z,1543897645.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-04T04:27:25.991Z,1543897645.991 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:27:26.004Z,1543897646.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:27:26.004Z,1543897646.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:27:26.410Z,1543897646.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:27:26.410Z,1543897646.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-04T04:27:26.410Z,1543897646.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:27:26.410Z,1543897646.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-04T04:27:26.786Z,1543897646.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:27:26.787Z,1543897646.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:27:26.787Z,1543897646.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:27:26.787Z,1543897646.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:27:26.788Z,1543897646.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:27:26.788Z,1543897646.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:28:56.762Z,1543897736.762 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T04:28:56.762Z,1543897736.762 [Default:CheckIn:C.Wait] Stopped 2018-12-04T04:28:56.762Z,1543897736.762 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T04:28:56.762Z,1543897736.762 [Default:CheckIn:D] Running Loop=1 2018-12-04T04:28:57.169Z,1543897737.169 [Default:CheckIn:D] Stopped 2018-12-04T04:28:57.169Z,1543897737.169 [Default:CheckIn:E] Running Loop=1 2018-12-04T04:28:57.570Z,1543897737.570 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 434.085775 min 2018-12-04T04:28:57.570Z,1543897737.570 [Default:CheckIn:E] Stopped 2018-12-04T04:28:57.571Z,1543897737.571 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T04:28:57.571Z,1543897737.571 [Default:CheckIn] Stopped 2018-12-04T04:28:57.571Z,1543897737.571 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T04:28:57.571Z,1543897737.571 [Default:CheckIn](INFO): Running loop #43 2018-12-04T04:28:57.571Z,1543897737.571 [Default:CheckIn] Running Loop=43 2018-12-04T04:28:57.571Z,1543897737.571 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T04:28:57.571Z,1543897737.571 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T04:28:58.336Z,1543897738.336 [NAL9602](INFO): Powering up 2018-12-04T04:29:09.136Z,1543897749.136 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:29:09.936Z,1543897749.936 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T04:29:09.936Z,1543897749.936 [NAL9602] Data Fault, FailCount= 3 2018-12-04T04:29:09.936Z,1543897749.936 [NAL9602](ERROR): Data Fault 2018-12-04T04:29:09.000Z,1543897750.000 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T04:29:10.336Z,1543897750.336 [NAL9602](INFO): Powering down 2018-12-04T04:29:11.181Z,1543897751.181 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T04:29:11.181Z,1543897751.181 [NAL9602] No Fault, FailCount= 3 2018-12-04T04:29:27.122Z,1543897767.122 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:29:27.122Z,1543897767.122 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-04T04:29:27.122Z,1543897767.122 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:29:27.124Z,1543897767.124 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:29:27.124Z,1543897767.124 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-04T04:29:27.125Z,1543897767.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:29:27.138Z,1543897767.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:29:27.138Z,1543897767.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:29:27.537Z,1543897767.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:29:27.537Z,1543897767.537 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-04T04:29:27.538Z,1543897767.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:29:27.538Z,1543897767.538 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-04T04:29:27.922Z,1543897767.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:29:27.923Z,1543897767.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:29:27.923Z,1543897767.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:29:27.923Z,1543897767.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:29:27.924Z,1543897767.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:29:27.924Z,1543897767.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:29:40.692Z,1543897780.692 [NAL9602](INFO): Powering up NAL9602 2018-12-04T04:29:52.808Z,1543897792.808 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:31:28.103Z,1543897888.103 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:31:28.103Z,1543897888.103 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-04T04:31:28.103Z,1543897888.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:31:28.105Z,1543897888.105 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:31:28.105Z,1543897888.105 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-04T04:31:28.105Z,1543897888.105 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:31:28.119Z,1543897888.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:31:28.119Z,1543897888.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:31:28.521Z,1543897888.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:31:28.521Z,1543897888.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-04T04:31:28.521Z,1543897888.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:31:28.521Z,1543897888.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-04T04:31:28.910Z,1543897888.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:31:28.910Z,1543897888.910 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:31:28.911Z,1543897888.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:31:28.911Z,1543897888.911 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:31:28.911Z,1543897888.911 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:31:28.912Z,1543897888.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:33:29.012Z,1543898009.012 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:33:29.013Z,1543898009.013 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-04T04:33:29.013Z,1543898009.013 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:33:29.015Z,1543898009.015 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:33:29.015Z,1543898009.015 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-04T04:33:29.015Z,1543898009.015 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:33:29.029Z,1543898009.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:33:29.029Z,1543898009.029 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:33:29.423Z,1543898009.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:33:29.423Z,1543898009.423 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-04T04:33:29.423Z,1543898009.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:33:29.424Z,1543898009.424 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-04T04:33:29.822Z,1543898009.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:33:29.823Z,1543898009.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:33:29.823Z,1543898009.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:33:29.823Z,1543898009.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:33:29.824Z,1543898009.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:33:29.824Z,1543898009.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:33:59.003Z,1543898039.003 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T04:28:57.6Z 2018-12-04T04:33:59.003Z,1543898039.003 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T04:33:59.003Z,1543898039.003 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T04:34:03.913Z,1543898043.913 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0126.lzma 2018-12-04T04:34:04.705Z,1543898044.705 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0126.lzma.bak 2018-12-04T04:34:04.705Z,1543898044.705 [DataOverHttps](INFO): SBD MOMSN=8962863 2018-12-04T04:34:14.224Z,1543898054.224 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0127.lzma 2018-12-04T04:34:15.026Z,1543898055.026 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0127.lzma.bak 2018-12-04T04:34:15.034Z,1543898055.034 [DataOverHttps](INFO): SBD MOMSN=8962865 2018-12-04T04:34:16.307Z,1543898056.307 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T04:34:16.308Z,1543898056.308 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T04:34:16.308Z,1543898056.308 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T04:34:56.292Z,1543898096.292 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T04:35:27.099Z,1543898127.099 [NAL9602](INFO): Powering down 2018-12-04T04:35:30.434Z,1543898130.434 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:35:30.434Z,1543898130.434 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-04T04:35:30.434Z,1543898130.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:35:30.436Z,1543898130.436 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:35:30.436Z,1543898130.436 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-04T04:35:30.436Z,1543898130.436 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:35:30.450Z,1543898130.450 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:35:30.450Z,1543898130.450 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:35:30.585Z,1543898130.585 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:35:30.585Z,1543898130.585 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-04T04:35:30.586Z,1543898130.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:35:30.586Z,1543898130.586 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-04T04:35:30.924Z,1543898130.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:35:30.925Z,1543898130.925 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:35:30.925Z,1543898130.925 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:35:30.925Z,1543898130.925 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:35:30.926Z,1543898130.926 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:35:30.926Z,1543898130.926 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:36:08.974Z,1543898168.974 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T04:36:08.974Z,1543898168.974 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T04:36:08.974Z,1543898168.974 [DropWeight](ERROR): Hardware Fault 2018-12-04T04:36:09.012Z,1543898169.012 [CBIT](INFO): Critical error at 20181204T043608 2018-12-04T04:36:09.015Z,1543898169.015 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T04:36:09.015Z,1543898169.015 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T04:36:09.408Z,1543898169.408 [CBIT](INFO): Critical error at 20181204T043609 2018-12-04T04:37:30.991Z,1543898250.991 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:37:30.991Z,1543898250.991 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-04T04:37:30.991Z,1543898250.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:37:30.993Z,1543898250.993 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:37:30.993Z,1543898250.993 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-04T04:37:30.994Z,1543898250.994 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:37:31.009Z,1543898251.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:37:31.009Z,1543898251.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:37:31.408Z,1543898251.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:37:31.408Z,1543898251.408 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-04T04:37:31.409Z,1543898251.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:37:31.409Z,1543898251.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-04T04:37:31.791Z,1543898251.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:37:31.791Z,1543898251.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:37:31.792Z,1543898251.792 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:37:31.792Z,1543898251.792 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:37:31.793Z,1543898251.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:37:31.793Z,1543898251.793 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:39:16.671Z,1543898356.671 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T04:39:16.671Z,1543898356.671 [Default:CheckIn:C.Wait] Stopped 2018-12-04T04:39:16.671Z,1543898356.671 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T04:39:16.671Z,1543898356.671 [Default:CheckIn:D] Running Loop=1 2018-12-04T04:39:17.078Z,1543898357.078 [Default:CheckIn:D] Stopped 2018-12-04T04:39:17.078Z,1543898357.078 [Default:CheckIn:E] Running Loop=1 2018-12-04T04:39:17.478Z,1543898357.478 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 444.417611 min 2018-12-04T04:39:17.478Z,1543898357.478 [Default:CheckIn:E] Stopped 2018-12-04T04:39:17.478Z,1543898357.478 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T04:39:17.479Z,1543898357.479 [Default:CheckIn] Stopped 2018-12-04T04:39:17.479Z,1543898357.479 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T04:39:17.479Z,1543898357.479 [Default:CheckIn](INFO): Running loop #44 2018-12-04T04:39:17.479Z,1543898357.479 [Default:CheckIn] Running Loop=44 2018-12-04T04:39:17.479Z,1543898357.479 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T04:39:17.479Z,1543898357.479 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T04:39:18.243Z,1543898358.243 [NAL9602](INFO): Powering up 2018-12-04T04:39:29.443Z,1543898369.443 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:39:31.871Z,1543898371.871 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:39:31.871Z,1543898371.871 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-04T04:39:31.871Z,1543898371.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:39:31.873Z,1543898371.873 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:39:31.873Z,1543898371.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-04T04:39:31.873Z,1543898371.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:39:31.898Z,1543898371.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:39:31.899Z,1543898371.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:39:32.291Z,1543898372.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:39:32.291Z,1543898372.291 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-04T04:39:32.292Z,1543898372.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:39:32.292Z,1543898372.292 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-04T04:39:32.666Z,1543898372.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:39:32.667Z,1543898372.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:39:32.667Z,1543898372.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:39:32.667Z,1543898372.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:39:32.668Z,1543898372.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:39:32.668Z,1543898372.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:40:01.119Z,1543898401.119 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T04:40:01.194Z,1543898401.194 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T04:40:01.194Z,1543898401.194 [NAL9602] Data Fault, FailCount= 4 2018-12-04T04:40:01.194Z,1543898401.194 [NAL9602](ERROR): Data Fault 2018-12-04T04:40:01.232Z,1543898401.232 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T04:40:01.519Z,1543898401.519 [NAL9602](INFO): Powering down 2018-12-04T04:40:02.373Z,1543898402.373 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T04:40:02.374Z,1543898402.374 [NAL9602] No Fault, FailCount= 4 2018-12-04T04:40:31.895Z,1543898431.895 [NAL9602](INFO): Powering up NAL9602 2018-12-04T04:40:43.095Z,1543898443.095 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:40:43.892Z,1543898443.892 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T04:40:43.892Z,1543898443.892 [NAL9602] Data Fault, FailCount= 5 2018-12-04T04:40:43.893Z,1543898443.893 [NAL9602](ERROR): Data Fault 2018-12-04T04:40:43.961Z,1543898443.961 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T04:40:43.962Z,1543898443.962 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T04:40:46.984Z,1543898446.984 [NAL9602](INFO): Powering down 2018-12-04T04:40:47.034Z,1543898447.034 [CBIT](INFO): Critical error at 20181204T044043 2018-12-04T04:41:33.038Z,1543898493.038 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:41:33.038Z,1543898493.038 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-04T04:41:33.038Z,1543898493.038 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:41:33.040Z,1543898493.040 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:41:33.040Z,1543898493.040 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-04T04:41:33.041Z,1543898493.041 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:41:33.054Z,1543898493.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:41:33.054Z,1543898493.054 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:41:33.450Z,1543898493.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:41:33.450Z,1543898493.450 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-04T04:41:33.451Z,1543898493.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:41:33.451Z,1543898493.451 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-04T04:41:33.836Z,1543898493.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:41:33.837Z,1543898493.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:41:33.837Z,1543898493.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:41:33.838Z,1543898493.838 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:41:33.838Z,1543898493.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:41:33.839Z,1543898493.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:42:43.922Z,1543898563.922 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T04:42:43.922Z,1543898563.922 [NAL9602] No Fault, FailCount= 5 2018-12-04T04:42:44.288Z,1543898564.288 [NAL9602](INFO): Powering up NAL9602 2018-12-04T04:42:55.088Z,1543898575.088 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:43:33.938Z,1543898613.938 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:43:33.938Z,1543898613.938 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-04T04:43:33.939Z,1543898613.939 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:43:33.941Z,1543898613.941 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:43:33.941Z,1543898613.941 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-04T04:43:33.941Z,1543898613.941 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:43:33.955Z,1543898613.955 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:43:33.955Z,1543898613.955 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:43:34.344Z,1543898614.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:43:34.344Z,1543898614.344 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-04T04:43:34.344Z,1543898614.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:43:34.344Z,1543898614.344 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-04T04:43:34.738Z,1543898614.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:43:34.738Z,1543898614.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:43:34.739Z,1543898614.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:43:34.750Z,1543898614.750 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:43:34.751Z,1543898614.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:43:34.751Z,1543898614.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:44:18.192Z,1543898658.192 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T04:39:17.5Z 2018-12-04T04:44:18.193Z,1543898658.193 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T04:44:18.193Z,1543898658.193 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T04:44:23.297Z,1543898663.297 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181203T211451/Courier0129.lzma 2018-12-04T04:44:24.098Z,1543898664.098 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0129.lzma.bak 2018-12-04T04:44:24.108Z,1543898664.108 [DataOverHttps](INFO): SBD MOMSN=8962894 2018-12-04T04:44:33.444Z,1543898673.444 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T04:44:33.932Z,1543898673.932 [DataOverHttps](INFO): Sending 340 bytes from file Logs/20181203T211451/Express0130.lzma 2018-12-04T04:44:34.729Z,1543898674.729 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0130.lzma.bak 2018-12-04T04:44:34.729Z,1543898674.729 [DataOverHttps](INFO): SBD MOMSN=8962899 2018-12-04T04:44:36.003Z,1543898676.003 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T04:44:36.004Z,1543898676.004 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T04:44:36.004Z,1543898676.004 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T04:45:03.815Z,1543898703.815 [NAL9602](INFO): Powering down 2018-12-04T04:45:35.001Z,1543898735.001 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:45:35.002Z,1543898735.002 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-04T04:45:35.002Z,1543898735.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:45:35.004Z,1543898735.004 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:45:35.004Z,1543898735.004 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-04T04:45:35.004Z,1543898735.004 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:45:35.024Z,1543898735.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:45:35.025Z,1543898735.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:45:35.425Z,1543898735.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:45:35.425Z,1543898735.425 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-04T04:45:35.426Z,1543898735.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:45:35.426Z,1543898735.426 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-04T04:45:35.793Z,1543898735.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:45:35.794Z,1543898735.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:45:35.810Z,1543898735.810 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:45:35.811Z,1543898735.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:45:35.811Z,1543898735.811 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:45:35.812Z,1543898735.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:47:36.204Z,1543898856.204 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:47:36.204Z,1543898856.204 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-04T04:47:36.204Z,1543898856.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:47:36.206Z,1543898856.206 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:47:36.206Z,1543898856.206 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-04T04:47:36.206Z,1543898856.206 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:47:36.220Z,1543898856.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:47:36.220Z,1543898856.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:47:36.616Z,1543898856.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:47:36.616Z,1543898856.616 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-04T04:47:36.617Z,1543898856.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:47:36.617Z,1543898856.617 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-04T04:47:36.994Z,1543898856.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:47:36.995Z,1543898856.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:47:36.995Z,1543898856.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:47:36.995Z,1543898856.995 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:47:36.996Z,1543898856.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:47:36.996Z,1543898856.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:49:36.368Z,1543898976.368 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T04:49:36.368Z,1543898976.368 [Default:CheckIn:C.Wait] Stopped 2018-12-04T04:49:36.368Z,1543898976.368 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T04:49:36.368Z,1543898976.368 [Default:CheckIn:D] Running Loop=1 2018-12-04T04:49:36.774Z,1543898976.774 [Default:CheckIn:D] Stopped 2018-12-04T04:49:36.774Z,1543898976.774 [Default:CheckIn:E] Running Loop=1 2018-12-04T04:49:37.170Z,1543898977.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:49:37.170Z,1543898977.170 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-04T04:49:37.171Z,1543898977.171 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:49:37.173Z,1543898977.173 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:49:37.173Z,1543898977.173 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-04T04:49:37.173Z,1543898977.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:49:37.176Z,1543898977.176 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 454.745866 min 2018-12-04T04:49:37.176Z,1543898977.176 [Default:CheckIn:E] Stopped 2018-12-04T04:49:37.176Z,1543898977.176 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T04:49:37.176Z,1543898977.176 [Default:CheckIn] Stopped 2018-12-04T04:49:37.176Z,1543898977.176 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T04:49:37.176Z,1543898977.176 [Default:CheckIn](INFO): Running loop #45 2018-12-04T04:49:37.177Z,1543898977.177 [Default:CheckIn] Running Loop=45 2018-12-04T04:49:37.177Z,1543898977.177 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T04:49:37.177Z,1543898977.177 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T04:49:37.188Z,1543898977.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:49:37.188Z,1543898977.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:49:37.574Z,1543898977.574 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:49:37.575Z,1543898977.575 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-04T04:49:37.575Z,1543898977.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:49:37.575Z,1543898977.575 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-04T04:49:37.939Z,1543898977.939 [NAL9602](INFO): Powering up 2018-12-04T04:49:37.970Z,1543898977.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:49:37.970Z,1543898977.970 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:49:37.971Z,1543898977.971 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:49:37.971Z,1543898977.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:49:37.972Z,1543898977.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:49:37.972Z,1543898977.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:49:49.139Z,1543898989.139 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:50:21.089Z,1543899021.089 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T04:50:21.164Z,1543899021.164 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T04:50:21.164Z,1543899021.164 [NAL9602] Data Fault, FailCount= 1 2018-12-04T04:50:21.164Z,1543899021.164 [NAL9602](ERROR): Data Fault 2018-12-04T04:50:21.204Z,1543899021.204 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T04:50:21.495Z,1543899021.495 [NAL9602](INFO): Powering down 2018-12-04T04:50:22.348Z,1543899022.348 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T04:50:22.348Z,1543899022.348 [NAL9602] No Fault, FailCount= 1 2018-12-04T04:50:51.863Z,1543899051.863 [NAL9602](INFO): Powering up NAL9602 2018-12-04T04:51:03.063Z,1543899063.063 [NAL9602](INFO): NAL9602 initialized 2018-12-04T04:51:09.109Z,1543899069.109 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T04:51:09.109Z,1543899069.109 [DropWeight] No Fault, FailCount= 1 2018-12-04T04:51:38.258Z,1543899098.258 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:51:38.258Z,1543899098.258 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-04T04:51:38.259Z,1543899098.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:51:38.261Z,1543899098.261 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:51:38.261Z,1543899098.261 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-04T04:51:38.261Z,1543899098.261 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:51:38.274Z,1543899098.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:51:38.274Z,1543899098.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:51:38.676Z,1543899098.676 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:51:38.676Z,1543899098.676 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-04T04:51:38.676Z,1543899098.676 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:51:38.676Z,1543899098.676 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-04T04:51:41.944Z,1543899101.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:51:41.945Z,1543899101.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:51:41.945Z,1543899101.945 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:51:41.945Z,1543899101.945 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:51:41.946Z,1543899101.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:51:41.946Z,1543899101.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:53:42.035Z,1543899222.035 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:53:42.035Z,1543899222.035 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-04T04:53:42.035Z,1543899222.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:53:42.037Z,1543899222.037 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:53:42.038Z,1543899222.038 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-04T04:53:42.038Z,1543899222.038 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:53:42.052Z,1543899222.052 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:53:42.052Z,1543899222.052 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:53:42.454Z,1543899222.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:53:42.454Z,1543899222.454 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-04T04:53:42.455Z,1543899222.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:53:42.455Z,1543899222.455 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-04T04:53:42.842Z,1543899222.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:53:42.843Z,1543899222.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:53:42.843Z,1543899222.843 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:53:42.843Z,1543899222.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:53:42.844Z,1543899222.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:53:42.844Z,1543899222.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:54:38.083Z,1543899278.083 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T04:49:37.2Z 2018-12-04T04:54:38.083Z,1543899278.083 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T04:54:38.083Z,1543899278.083 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T04:54:43.058Z,1543899283.058 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0132.lzma 2018-12-04T04:54:43.849Z,1543899283.849 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0132.lzma.bak 2018-12-04T04:54:43.849Z,1543899283.849 [DataOverHttps](INFO): SBD MOMSN=8962926 2018-12-04T04:54:53.616Z,1543899293.616 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T04:54:54.064Z,1543899294.064 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20181203T211451/Express0133.lzma 2018-12-04T04:54:54.861Z,1543899294.861 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0133.lzma.bak 2018-12-04T04:54:54.861Z,1543899294.861 [DataOverHttps](INFO): SBD MOMSN=8962928 2018-12-04T04:54:56.179Z,1543899296.179 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T04:54:56.179Z,1543899296.179 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T04:54:56.179Z,1543899296.179 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T04:55:23.827Z,1543899323.827 [NAL9602](INFO): Powering down 2018-12-04T04:55:42.994Z,1543899342.994 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:55:42.994Z,1543899342.994 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-04T04:55:42.995Z,1543899342.995 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:55:42.997Z,1543899342.997 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:55:42.997Z,1543899342.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-04T04:55:42.997Z,1543899342.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:55:43.048Z,1543899343.048 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:55:43.049Z,1543899343.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:55:43.435Z,1543899343.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:55:43.435Z,1543899343.435 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-04T04:55:43.435Z,1543899343.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:55:43.436Z,1543899343.436 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-04T04:55:43.787Z,1543899343.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:55:43.788Z,1543899343.788 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:55:43.788Z,1543899343.788 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:55:43.789Z,1543899343.789 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:55:43.789Z,1543899343.789 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:55:43.789Z,1543899343.789 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:57:43.850Z,1543899463.850 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:57:43.850Z,1543899463.850 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-04T04:57:43.850Z,1543899463.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:57:43.853Z,1543899463.853 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:57:43.853Z,1543899463.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-04T04:57:43.853Z,1543899463.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:57:43.866Z,1543899463.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:57:43.866Z,1543899463.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:57:44.282Z,1543899464.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:57:44.282Z,1543899464.282 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-04T04:57:44.283Z,1543899464.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:57:44.283Z,1543899464.283 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-04T04:57:44.646Z,1543899464.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:57:44.646Z,1543899464.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:57:44.647Z,1543899464.647 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:57:44.647Z,1543899464.647 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:57:44.647Z,1543899464.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:57:44.648Z,1543899464.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:59:44.722Z,1543899584.722 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:59:44.722Z,1543899584.722 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-04T04:59:44.722Z,1543899584.722 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T04:59:44.724Z,1543899584.724 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T04:59:44.724Z,1543899584.724 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-04T04:59:44.725Z,1543899584.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T04:59:44.738Z,1543899584.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T04:59:44.738Z,1543899584.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T04:59:45.184Z,1543899585.184 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T04:59:45.184Z,1543899585.184 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-04T04:59:45.184Z,1543899585.184 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T04:59:45.184Z,1543899585.184 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-04T04:59:45.537Z,1543899585.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T04:59:45.538Z,1543899585.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:59:45.538Z,1543899585.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:59:45.539Z,1543899585.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T04:59:45.539Z,1543899585.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T04:59:45.539Z,1543899585.539 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T04:59:56.326Z,1543899596.326 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T04:59:56.326Z,1543899596.326 [Default:CheckIn:C.Wait] Stopped 2018-12-04T04:59:56.326Z,1543899596.326 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T04:59:56.327Z,1543899596.327 [Default:CheckIn:D] Running Loop=1 2018-12-04T04:59:56.729Z,1543899596.729 [Default:CheckIn:D] Stopped 2018-12-04T04:59:56.729Z,1543899596.729 [Default:CheckIn:E] Running Loop=1 2018-12-04T04:59:57.134Z,1543899597.134 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 465.078451 min 2018-12-04T04:59:57.134Z,1543899597.134 [Default:CheckIn:E] Stopped 2018-12-04T04:59:57.134Z,1543899597.134 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T04:59:57.134Z,1543899597.134 [Default:CheckIn] Stopped 2018-12-04T04:59:57.135Z,1543899597.135 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T04:59:57.135Z,1543899597.135 [Default:CheckIn](INFO): Running loop #46 2018-12-04T04:59:57.135Z,1543899597.135 [Default:CheckIn] Running Loop=46 2018-12-04T04:59:57.135Z,1543899597.135 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T04:59:57.135Z,1543899597.135 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T04:59:57.893Z,1543899597.893 [NAL9602](INFO): Powering up 2018-12-04T05:00:09.094Z,1543899609.094 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:00:09.894Z,1543899609.894 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T05:00:09.894Z,1543899609.894 [NAL9602] Data Fault, FailCount= 2 2018-12-04T05:00:09.894Z,1543899609.894 [NAL9602](ERROR): Data Fault 2018-12-04T05:00:09.928Z,1543899609.928 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:00:10.296Z,1543899610.296 [NAL9602](INFO): Powering down 2018-12-04T05:00:11.133Z,1543899611.133 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:00:11.133Z,1543899611.133 [NAL9602] No Fault, FailCount= 2 2018-12-04T05:00:40.328Z,1543899640.328 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:00:52.456Z,1543899652.456 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:01:45.796Z,1543899705.796 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:01:45.796Z,1543899705.796 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-04T05:01:45.796Z,1543899705.796 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:01:45.798Z,1543899705.798 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:01:45.798Z,1543899705.798 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-04T05:01:45.798Z,1543899705.798 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:01:45.811Z,1543899705.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:01:45.812Z,1543899705.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:01:46.208Z,1543899706.208 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:01:46.208Z,1543899706.208 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-04T05:01:46.209Z,1543899706.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:01:46.209Z,1543899706.209 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-04T05:01:46.606Z,1543899706.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:01:46.607Z,1543899706.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:01:46.607Z,1543899706.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:01:46.607Z,1543899706.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:01:46.608Z,1543899706.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:01:46.608Z,1543899706.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:03:13.077Z,1543899793.077 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T05:03:48.299Z,1543899828.299 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:03:48.299Z,1543899828.299 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-04T05:03:48.299Z,1543899828.299 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:03:48.301Z,1543899828.301 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:03:48.301Z,1543899828.301 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-04T05:03:48.301Z,1543899828.301 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:03:48.314Z,1543899828.314 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:03:48.315Z,1543899828.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:03:48.447Z,1543899828.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:03:48.447Z,1543899828.447 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-04T05:03:48.447Z,1543899828.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:03:48.448Z,1543899828.448 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-04T05:03:48.758Z,1543899828.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:03:48.758Z,1543899828.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:03:48.759Z,1543899828.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:03:48.759Z,1543899828.759 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:03:48.759Z,1543899828.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:03:48.760Z,1543899828.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:04:58.757Z,1543899898.757 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T04:59:57.1Z 2018-12-04T05:04:58.757Z,1543899898.757 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T05:04:58.757Z,1543899898.757 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T05:05:03.717Z,1543899903.717 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0135.lzma 2018-12-04T05:05:04.509Z,1543899904.509 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0135.lzma.bak 2018-12-04T05:05:04.509Z,1543899904.509 [DataOverHttps](INFO): SBD MOMSN=8962957 2018-12-04T05:05:14.473Z,1543899914.473 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0136.lzma 2018-12-04T05:05:15.273Z,1543899915.273 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0136.lzma.bak 2018-12-04T05:05:15.273Z,1543899915.273 [DataOverHttps](INFO): SBD MOMSN=8962959 2018-12-04T05:05:16.575Z,1543899916.575 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T05:05:16.575Z,1543899916.575 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T05:05:16.575Z,1543899916.575 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T05:05:49.007Z,1543899949.007 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:05:49.007Z,1543899949.007 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-04T05:05:49.008Z,1543899949.008 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:05:49.010Z,1543899949.010 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:05:49.010Z,1543899949.010 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-04T05:05:49.010Z,1543899949.010 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:05:49.068Z,1543899949.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:05:49.068Z,1543899949.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:05:49.447Z,1543899949.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:05:49.447Z,1543899949.447 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-04T05:05:49.447Z,1543899949.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:05:49.447Z,1543899949.447 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-04T05:05:49.803Z,1543899949.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:05:49.804Z,1543899949.804 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:05:49.804Z,1543899949.804 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:05:49.804Z,1543899949.804 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:05:49.805Z,1543899949.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:05:49.805Z,1543899949.805 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:05:55.768Z,1543899955.768 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T05:06:26.568Z,1543899986.568 [NAL9602](INFO): Powering down 2018-12-04T05:07:49.950Z,1543900069.950 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:07:49.950Z,1543900069.950 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-04T05:07:49.950Z,1543900069.950 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:07:49.952Z,1543900069.952 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:07:49.952Z,1543900069.952 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-04T05:07:49.952Z,1543900069.952 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:07:49.965Z,1543900069.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:07:49.966Z,1543900069.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:07:50.378Z,1543900070.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:07:50.379Z,1543900070.379 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-04T05:07:50.379Z,1543900070.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:07:50.379Z,1543900070.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-04T05:07:50.753Z,1543900070.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:07:50.753Z,1543900070.753 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:07:50.754Z,1543900070.754 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:07:50.754Z,1543900070.754 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:07:50.755Z,1543900070.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:07:50.755Z,1543900070.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:09:51.046Z,1543900191.046 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:09:51.046Z,1543900191.046 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-04T05:09:51.046Z,1543900191.046 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:09:51.049Z,1543900191.049 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:09:51.049Z,1543900191.049 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-04T05:09:51.049Z,1543900191.049 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:09:51.062Z,1543900191.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:09:51.062Z,1543900191.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:09:51.466Z,1543900191.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:09:51.466Z,1543900191.466 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-04T05:09:51.466Z,1543900191.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:09:51.466Z,1543900191.466 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-04T05:09:51.854Z,1543900191.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:09:51.854Z,1543900191.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:09:51.855Z,1543900191.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:09:51.855Z,1543900191.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:09:51.855Z,1543900191.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:09:51.856Z,1543900191.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:10:16.799Z,1543900216.799 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T05:10:16.799Z,1543900216.799 [Default:CheckIn:C.Wait] Stopped 2018-12-04T05:10:16.799Z,1543900216.799 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T05:10:16.799Z,1543900216.799 [Default:CheckIn:D] Running Loop=1 2018-12-04T05:10:17.206Z,1543900217.206 [Default:CheckIn:D] Stopped 2018-12-04T05:10:17.206Z,1543900217.206 [Default:CheckIn:E] Running Loop=1 2018-12-04T05:10:17.598Z,1543900217.598 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 475.419727 min 2018-12-04T05:10:17.598Z,1543900217.598 [Default:CheckIn:E] Stopped 2018-12-04T05:10:17.598Z,1543900217.598 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T05:10:17.598Z,1543900217.598 [Default:CheckIn] Stopped 2018-12-04T05:10:17.599Z,1543900217.599 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T05:10:17.599Z,1543900217.599 [Default:CheckIn](INFO): Running loop #47 2018-12-04T05:10:17.599Z,1543900217.599 [Default:CheckIn] Running Loop=47 2018-12-04T05:10:17.599Z,1543900217.599 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T05:10:17.599Z,1543900217.599 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T05:10:18.371Z,1543900218.371 [NAL9602](INFO): Powering up 2018-12-04T05:10:29.572Z,1543900229.572 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:11:01.194Z,1543900261.194 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T05:11:01.266Z,1543900261.266 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T05:11:01.266Z,1543900261.266 [NAL9602] Data Fault, FailCount= 3 2018-12-04T05:11:01.266Z,1543900261.266 [NAL9602](ERROR): Data Fault 2018-12-04T05:11:01.323Z,1543900261.323 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:11:01.596Z,1543900261.596 [NAL9602](INFO): Powering down 2018-12-04T05:11:02.440Z,1543900262.440 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:11:02.440Z,1543900262.440 [NAL9602] No Fault, FailCount= 3 2018-12-04T05:11:31.949Z,1543900291.949 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:11:42.752Z,1543900302.752 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:11:43.552Z,1543900303.552 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T05:11:43.552Z,1543900303.552 [NAL9602] Data Fault, FailCount= 4 2018-12-04T05:11:43.552Z,1543900303.552 [NAL9602](ERROR): Data Fault 2018-12-04T05:11:43.613Z,1543900303.613 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:11:43.952Z,1543900303.952 [NAL9602](INFO): Powering down 2018-12-04T05:11:47.506Z,1543900307.506 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:11:47.506Z,1543900307.506 [NAL9602] No Fault, FailCount= 4 2018-12-04T05:11:51.954Z,1543900311.954 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:11:51.954Z,1543900311.954 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-04T05:11:51.954Z,1543900311.954 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:11:51.956Z,1543900311.956 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:11:51.957Z,1543900311.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-04T05:11:51.957Z,1543900311.957 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:11:51.970Z,1543900311.970 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:11:51.971Z,1543900311.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:11:52.365Z,1543900312.365 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:11:52.365Z,1543900312.365 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-04T05:11:52.367Z,1543900312.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:11:52.367Z,1543900312.367 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-04T05:11:52.766Z,1543900312.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:11:52.771Z,1543900312.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:11:52.771Z,1543900312.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:11:52.772Z,1543900312.772 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:11:52.772Z,1543900312.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:11:52.773Z,1543900312.773 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:12:14.317Z,1543900334.317 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:12:25.488Z,1543900345.488 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:13:52.839Z,1543900432.839 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:13:52.839Z,1543900432.839 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-04T05:13:52.839Z,1543900432.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:13:52.841Z,1543900432.841 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:13:52.841Z,1543900432.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-04T05:13:52.842Z,1543900432.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:13:52.856Z,1543900432.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:13:52.856Z,1543900432.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:13:53.249Z,1543900433.249 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:13:53.249Z,1543900433.249 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-04T05:13:53.250Z,1543900433.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:13:53.250Z,1543900433.250 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-04T05:13:53.650Z,1543900433.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:13:53.651Z,1543900433.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:13:53.651Z,1543900433.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:13:53.652Z,1543900433.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:13:53.652Z,1543900433.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:13:53.652Z,1543900433.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:15:18.752Z,1543900518.752 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T05:10:17.6Z 2018-12-04T05:15:18.752Z,1543900518.752 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T05:15:18.752Z,1543900518.752 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T05:15:23.668Z,1543900523.668 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0138.lzma 2018-12-04T05:15:24.437Z,1543900524.437 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0138.lzma.bak 2018-12-04T05:15:24.438Z,1543900524.438 [DataOverHttps](INFO): SBD MOMSN=8962991 2018-12-04T05:15:33.740Z,1543900533.740 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T05:15:34.224Z,1543900534.224 [DataOverHttps](INFO): Sending 342 bytes from file Logs/20181203T211451/Express0139.lzma 2018-12-04T05:15:35.021Z,1543900535.021 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0139.lzma.bak 2018-12-04T05:15:35.021Z,1543900535.021 [DataOverHttps](INFO): SBD MOMSN=8962993 2018-12-04T05:15:36.322Z,1543900536.322 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T05:15:36.322Z,1543900536.322 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T05:15:36.343Z,1543900536.343 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T05:15:53.928Z,1543900553.928 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:15:53.928Z,1543900553.928 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-04T05:15:53.928Z,1543900553.928 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:15:53.931Z,1543900553.931 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:15:53.931Z,1543900553.931 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-04T05:15:53.931Z,1543900553.931 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:15:53.961Z,1543900553.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:15:53.961Z,1543900553.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:15:54.368Z,1543900554.368 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:15:54.368Z,1543900554.368 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-04T05:15:54.369Z,1543900554.369 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:15:54.369Z,1543900554.369 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-04T05:15:54.729Z,1543900554.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:15:54.729Z,1543900554.729 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:15:54.729Z,1543900554.729 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:15:54.730Z,1543900554.730 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:15:54.730Z,1543900554.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:15:54.731Z,1543900554.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:16:03.919Z,1543900563.919 [NAL9602](INFO): Powering down 2018-12-04T05:17:54.845Z,1543900674.845 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:17:54.845Z,1543900674.845 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-04T05:17:54.845Z,1543900674.845 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:17:54.847Z,1543900674.847 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:17:54.847Z,1543900674.847 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-04T05:17:54.847Z,1543900674.847 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:17:54.860Z,1543900674.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:17:54.860Z,1543900674.860 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:17:55.257Z,1543900675.257 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:17:55.257Z,1543900675.257 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-04T05:17:55.258Z,1543900675.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:17:55.258Z,1543900675.258 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-04T05:17:55.650Z,1543900675.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:17:55.650Z,1543900675.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:17:55.651Z,1543900675.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:17:55.651Z,1543900675.651 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:17:55.651Z,1543900675.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:17:55.652Z,1543900675.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:19:55.706Z,1543900795.706 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:19:55.706Z,1543900795.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-04T05:19:55.706Z,1543900795.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:19:55.708Z,1543900795.708 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:19:55.709Z,1543900795.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-04T05:19:55.709Z,1543900795.709 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:19:55.722Z,1543900795.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:19:55.722Z,1543900795.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:19:56.111Z,1543900796.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:19:56.111Z,1543900796.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-04T05:19:56.112Z,1543900796.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:19:56.112Z,1543900796.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-04T05:19:56.506Z,1543900796.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:19:56.506Z,1543900796.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:19:56.507Z,1543900796.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:19:56.507Z,1543900796.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:19:56.507Z,1543900796.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:19:56.508Z,1543900796.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:20:36.470Z,1543900836.470 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T05:20:36.470Z,1543900836.470 [Default:CheckIn:C.Wait] Stopped 2018-12-04T05:20:36.470Z,1543900836.470 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T05:20:36.470Z,1543900836.470 [Default:CheckIn:D] Running Loop=1 2018-12-04T05:20:36.870Z,1543900836.870 [Default:CheckIn:D] Stopped 2018-12-04T05:20:36.870Z,1543900836.870 [Default:CheckIn:E] Running Loop=1 2018-12-04T05:20:37.263Z,1543900837.263 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 485.747461 min 2018-12-04T05:20:37.263Z,1543900837.263 [Default:CheckIn:E] Stopped 2018-12-04T05:20:37.263Z,1543900837.263 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T05:20:37.263Z,1543900837.263 [Default:CheckIn] Stopped 2018-12-04T05:20:37.263Z,1543900837.263 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T05:20:37.263Z,1543900837.263 [Default:CheckIn](INFO): Running loop #48 2018-12-04T05:20:37.263Z,1543900837.263 [Default:CheckIn] Running Loop=48 2018-12-04T05:20:37.264Z,1543900837.264 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T05:20:37.264Z,1543900837.264 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T05:20:38.036Z,1543900838.036 [NAL9602](INFO): Powering up 2018-12-04T05:20:49.236Z,1543900849.236 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:21:10.391Z,1543900870.391 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T05:21:10.391Z,1543900870.391 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T05:21:10.391Z,1543900870.391 [DropWeight](ERROR): Hardware Fault 2018-12-04T05:21:10.454Z,1543900870.454 [CBIT](INFO): Critical error at 20181204T052110 2018-12-04T05:21:10.457Z,1543900870.457 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T05:21:10.457Z,1543900870.457 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T05:21:10.838Z,1543900870.838 [CBIT](INFO): Critical error at 20181204T052110 2018-12-04T05:21:21.191Z,1543900881.191 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T05:21:21.274Z,1543900881.274 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T05:21:21.274Z,1543900881.274 [NAL9602] Data Fault, FailCount= 5 2018-12-04T05:21:21.274Z,1543900881.274 [NAL9602](ERROR): Data Fault 2018-12-04T05:21:21.344Z,1543900881.344 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:21:21.345Z,1543900881.345 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T05:21:21.591Z,1543900881.591 [NAL9602](INFO): Powering down 2018-12-04T05:21:21.651Z,1543900881.651 [CBIT](INFO): Critical error at 20181204T052121 2018-12-04T05:21:56.762Z,1543900916.762 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:21:56.762Z,1543900916.762 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-04T05:21:56.763Z,1543900916.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:21:56.765Z,1543900916.765 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:21:56.765Z,1543900916.765 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-04T05:21:56.765Z,1543900916.765 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:21:56.803Z,1543900916.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:21:56.803Z,1543900916.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:21:57.165Z,1543900917.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:21:57.165Z,1543900917.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-04T05:21:57.166Z,1543900917.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:21:57.166Z,1543900917.166 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-04T05:21:57.558Z,1543900917.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:21:57.558Z,1543900917.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:21:57.559Z,1543900917.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:21:57.559Z,1543900917.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:21:57.559Z,1543900917.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:21:57.560Z,1543900917.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:23:21.336Z,1543901001.336 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:23:21.336Z,1543901001.336 [NAL9602] No Fault, FailCount= 5 2018-12-04T05:23:21.691Z,1543901001.691 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:23:32.891Z,1543901012.891 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:23:33.696Z,1543901013.696 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T05:23:33.696Z,1543901013.696 [NAL9602] Data Fault, FailCount= 1 2018-12-04T05:23:33.696Z,1543901013.696 [NAL9602](ERROR): Data Fault 2018-12-04T05:23:33.773Z,1543901013.773 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:23:34.091Z,1543901014.091 [NAL9602](INFO): Powering down 2018-12-04T05:23:34.933Z,1543901014.933 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:23:34.933Z,1543901014.933 [NAL9602] No Fault, FailCount= 1 2018-12-04T05:23:57.691Z,1543901037.691 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:23:57.691Z,1543901037.691 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-04T05:23:57.691Z,1543901037.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:23:57.693Z,1543901037.693 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:23:57.693Z,1543901037.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-04T05:23:57.693Z,1543901037.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:23:57.707Z,1543901037.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:23:57.707Z,1543901037.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:23:58.106Z,1543901038.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:23:58.106Z,1543901038.106 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-04T05:23:58.107Z,1543901038.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:23:58.107Z,1543901038.107 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-04T05:23:58.486Z,1543901038.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:23:58.487Z,1543901038.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:23:58.487Z,1543901038.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:23:58.487Z,1543901038.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:23:58.488Z,1543901038.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:23:58.488Z,1543901038.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:24:04.467Z,1543901044.467 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:24:15.663Z,1543901055.663 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:25:38.497Z,1543901138.497 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T05:20:37.3Z 2018-12-04T05:25:38.497Z,1543901138.497 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T05:25:38.497Z,1543901138.497 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T05:25:43.382Z,1543901143.382 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20181203T211451/Courier0141.lzma 2018-12-04T05:25:44.181Z,1543901144.181 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0141.lzma.bak 2018-12-04T05:25:44.181Z,1543901144.181 [DataOverHttps](INFO): SBD MOMSN=8963025 2018-12-04T05:25:53.896Z,1543901153.896 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T05:25:53.956Z,1543901153.956 [DataOverHttps](INFO): Sending 344 bytes from file Logs/20181203T211451/Express0142.lzma 2018-12-04T05:25:54.757Z,1543901154.757 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0142.lzma.bak 2018-12-04T05:25:54.758Z,1543901154.758 [DataOverHttps](INFO): SBD MOMSN=8963030 2018-12-04T05:25:56.084Z,1543901156.084 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T05:25:56.084Z,1543901156.084 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T05:25:56.085Z,1543901156.085 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T05:25:59.303Z,1543901159.303 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:25:59.303Z,1543901159.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-04T05:25:59.303Z,1543901159.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:25:59.305Z,1543901159.305 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:25:59.305Z,1543901159.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-04T05:25:59.305Z,1543901159.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:25:59.365Z,1543901159.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:25:59.365Z,1543901159.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:25:59.441Z,1543901159.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:25:59.441Z,1543901159.441 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-04T05:25:59.441Z,1543901159.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:25:59.441Z,1543901159.441 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-04T05:25:59.806Z,1543901159.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:25:59.806Z,1543901159.806 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:25:59.807Z,1543901159.807 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:25:59.807Z,1543901159.807 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:25:59.808Z,1543901159.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:25:59.808Z,1543901159.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:26:24.185Z,1543901184.185 [NAL9602](INFO): Powering down 2018-12-04T05:28:00.197Z,1543901280.197 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:28:00.197Z,1543901280.197 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-04T05:28:00.197Z,1543901280.197 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:28:00.199Z,1543901280.199 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:28:00.199Z,1543901280.199 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-04T05:28:00.199Z,1543901280.199 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:28:00.213Z,1543901280.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:28:00.213Z,1543901280.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:28:00.618Z,1543901280.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:28:00.618Z,1543901280.618 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-04T05:28:00.618Z,1543901280.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:28:00.619Z,1543901280.619 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-04T05:28:00.998Z,1543901280.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:28:00.999Z,1543901280.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:28:00.999Z,1543901280.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:28:00.000Z,1543901281.000 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:28:00.000Z,1543901281.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:28:01.000Z,1543901281.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:30:01.374Z,1543901401.374 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:30:01.374Z,1543901401.374 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-04T05:30:01.374Z,1543901401.374 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:30:01.376Z,1543901401.376 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:30:01.376Z,1543901401.376 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-04T05:30:01.377Z,1543901401.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:30:01.390Z,1543901401.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:30:01.391Z,1543901401.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:30:01.788Z,1543901401.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:30:01.788Z,1543901401.788 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-04T05:30:01.789Z,1543901401.789 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:30:01.789Z,1543901401.789 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-04T05:30:02.174Z,1543901402.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:30:02.174Z,1543901402.174 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:30:02.175Z,1543901402.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:30:02.175Z,1543901402.175 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:30:02.175Z,1543901402.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:30:02.176Z,1543901402.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:30:56.238Z,1543901456.238 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T05:30:56.238Z,1543901456.238 [Default:CheckIn:C.Wait] Stopped 2018-12-04T05:30:56.238Z,1543901456.238 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T05:30:56.238Z,1543901456.238 [Default:CheckIn:D] Running Loop=1 2018-12-04T05:30:56.636Z,1543901456.636 [Default:CheckIn:D] Stopped 2018-12-04T05:30:56.636Z,1543901456.636 [Default:CheckIn:E] Running Loop=1 2018-12-04T05:30:57.035Z,1543901457.035 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 496.076921 min 2018-12-04T05:30:57.035Z,1543901457.035 [Default:CheckIn:E] Stopped 2018-12-04T05:30:57.035Z,1543901457.035 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T05:30:57.035Z,1543901457.035 [Default:CheckIn] Stopped 2018-12-04T05:30:57.036Z,1543901457.036 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T05:30:57.036Z,1543901457.036 [Default:CheckIn](INFO): Running loop #49 2018-12-04T05:30:57.036Z,1543901457.036 [Default:CheckIn] Running Loop=49 2018-12-04T05:30:57.036Z,1543901457.036 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T05:30:57.036Z,1543901457.036 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T05:30:57.807Z,1543901457.807 [NAL9602](INFO): Powering up 2018-12-04T05:31:09.008Z,1543901469.008 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:31:40.675Z,1543901500.675 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T05:31:40.758Z,1543901500.758 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T05:31:40.758Z,1543901500.758 [NAL9602] Data Fault, FailCount= 2 2018-12-04T05:31:40.758Z,1543901500.758 [NAL9602](ERROR): Data Fault 2018-12-04T05:31:40.801Z,1543901500.801 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:31:41.071Z,1543901501.071 [NAL9602](INFO): Powering down 2018-12-04T05:31:41.902Z,1543901501.902 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:31:41.902Z,1543901501.902 [NAL9602] No Fault, FailCount= 2 2018-12-04T05:32:02.300Z,1543901522.300 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:32:02.300Z,1543901522.300 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-04T05:32:02.300Z,1543901522.300 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:32:02.302Z,1543901522.302 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:32:02.302Z,1543901522.302 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-04T05:32:02.302Z,1543901522.302 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:32:02.331Z,1543901522.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:32:02.331Z,1543901522.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:32:02.714Z,1543901522.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:32:02.714Z,1543901522.714 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-04T05:32:02.726Z,1543901522.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:32:02.727Z,1543901522.727 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-04T05:32:03.106Z,1543901523.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:32:03.107Z,1543901523.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:32:03.107Z,1543901523.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:32:03.108Z,1543901523.108 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:32:03.108Z,1543901523.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:32:03.108Z,1543901523.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:32:11.081Z,1543901531.081 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:32:21.884Z,1543901541.884 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:34:03.167Z,1543901643.167 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:34:03.167Z,1543901643.167 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-04T05:34:03.167Z,1543901643.167 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:34:03.169Z,1543901643.169 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:34:03.169Z,1543901643.169 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-04T05:34:03.169Z,1543901643.169 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:34:03.183Z,1543901643.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:34:03.184Z,1543901643.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:34:03.578Z,1543901643.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:34:03.578Z,1543901643.578 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-04T05:34:03.579Z,1543901643.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:34:03.579Z,1543901643.579 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-04T05:34:03.966Z,1543901643.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:34:03.967Z,1543901643.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:34:03.967Z,1543901643.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:34:03.967Z,1543901643.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:34:03.968Z,1543901643.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:34:03.968Z,1543901643.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:35:58.307Z,1543901758.307 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T05:30:57.0Z 2018-12-04T05:35:58.307Z,1543901758.307 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T05:35:58.307Z,1543901758.307 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T05:36:04.123Z,1543901764.123 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0144.lzma 2018-12-04T05:36:04.191Z,1543901764.191 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:36:04.191Z,1543901764.191 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-04T05:36:04.192Z,1543901764.192 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:36:04.194Z,1543901764.194 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:36:04.194Z,1543901764.194 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-04T05:36:04.194Z,1543901764.194 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:36:04.279Z,1543901764.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:36:04.279Z,1543901764.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:36:04.571Z,1543901764.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:36:04.571Z,1543901764.571 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-04T05:36:04.571Z,1543901764.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:36:04.571Z,1543901764.571 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-04T05:36:04.958Z,1543901764.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:36:04.958Z,1543901764.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:36:04.959Z,1543901764.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:36:04.959Z,1543901764.959 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:36:04.959Z,1543901764.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:36:04.960Z,1543901764.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:36:05.321Z,1543901765.321 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0144.lzma.bak 2018-12-04T05:36:05.321Z,1543901765.321 [DataOverHttps](INFO): SBD MOMSN=8963060 2018-12-04T05:36:10.776Z,1543901770.776 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T05:36:10.777Z,1543901770.777 [DropWeight] No Fault, FailCount= 1 2018-12-04T05:36:14.620Z,1543901774.620 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T05:36:14.678Z,1543901774.678 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20181203T211451/Express0145.lzma 2018-12-04T05:36:15.477Z,1543901775.477 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0145.lzma.bak 2018-12-04T05:36:15.477Z,1543901775.477 [DataOverHttps](INFO): SBD MOMSN=8963062 2018-12-04T05:36:16.798Z,1543901776.798 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T05:36:16.798Z,1543901776.798 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T05:36:16.798Z,1543901776.798 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T05:36:44.933Z,1543901804.933 [NAL9602](INFO): Powering down 2018-12-04T05:38:06.109Z,1543901886.109 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:38:06.109Z,1543901886.109 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-04T05:38:06.109Z,1543901886.109 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:38:06.111Z,1543901886.111 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:38:06.112Z,1543901886.112 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-04T05:38:06.112Z,1543901886.112 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:38:06.154Z,1543901886.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:38:06.154Z,1543901886.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:38:06.234Z,1543901886.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:38:06.234Z,1543901886.234 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-04T05:38:06.235Z,1543901886.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:38:06.235Z,1543901886.235 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-04T05:38:06.590Z,1543901886.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:38:06.604Z,1543901886.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:38:06.604Z,1543901886.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:38:06.605Z,1543901886.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:38:06.605Z,1543901886.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:38:06.605Z,1543901886.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:40:06.721Z,1543902006.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:40:06.721Z,1543902006.721 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-04T05:40:06.721Z,1543902006.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:40:06.723Z,1543902006.723 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:40:06.723Z,1543902006.723 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-04T05:40:06.723Z,1543902006.723 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:40:06.736Z,1543902006.736 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:40:06.737Z,1543902006.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:40:07.152Z,1543902007.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:40:07.152Z,1543902007.152 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-04T05:40:07.153Z,1543902007.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:40:07.153Z,1543902007.153 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-04T05:40:07.510Z,1543902007.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:40:07.510Z,1543902007.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:40:07.511Z,1543902007.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:40:07.511Z,1543902007.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:40:07.512Z,1543902007.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:40:07.512Z,1543902007.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:41:17.124Z,1543902077.124 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T05:41:17.124Z,1543902077.124 [Default:CheckIn:C.Wait] Stopped 2018-12-04T05:41:17.124Z,1543902077.124 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T05:41:17.124Z,1543902077.124 [Default:CheckIn:D] Running Loop=1 2018-12-04T05:41:17.552Z,1543902077.552 [Default:CheckIn:D] Stopped 2018-12-04T05:41:17.552Z,1543902077.552 [Default:CheckIn:E] Running Loop=1 2018-12-04T05:41:17.925Z,1543902077.925 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 506.425521 min 2018-12-04T05:41:17.925Z,1543902077.925 [Default:CheckIn:E] Stopped 2018-12-04T05:41:17.925Z,1543902077.925 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T05:41:17.925Z,1543902077.925 [Default:CheckIn] Stopped 2018-12-04T05:41:17.925Z,1543902077.925 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T05:41:17.925Z,1543902077.925 [Default:CheckIn](INFO): Running loop #50 2018-12-04T05:41:17.925Z,1543902077.925 [Default:CheckIn] Running Loop=50 2018-12-04T05:41:17.926Z,1543902077.926 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T05:41:17.926Z,1543902077.926 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T05:41:18.703Z,1543902078.703 [NAL9602](INFO): Powering up 2018-12-04T05:41:29.904Z,1543902089.904 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:41:30.708Z,1543902090.708 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T05:41:30.708Z,1543902090.708 [NAL9602] Data Fault, FailCount= 3 2018-12-04T05:41:30.708Z,1543902090.708 [NAL9602](ERROR): Data Fault 2018-12-04T05:41:30.791Z,1543902090.791 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:41:31.103Z,1543902091.103 [NAL9602](INFO): Powering down 2018-12-04T05:41:31.977Z,1543902091.977 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:41:31.977Z,1543902091.977 [NAL9602] No Fault, FailCount= 3 2018-12-04T05:42:01.472Z,1543902121.472 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:42:07.884Z,1543902127.884 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:42:07.884Z,1543902127.884 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-04T05:42:07.884Z,1543902127.884 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:42:07.886Z,1543902127.886 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:42:07.887Z,1543902127.887 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-04T05:42:07.887Z,1543902127.887 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:42:07.900Z,1543902127.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:42:07.900Z,1543902127.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:42:08.322Z,1543902128.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:42:08.322Z,1543902128.322 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-04T05:42:08.323Z,1543902128.323 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:42:08.323Z,1543902128.323 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-04T05:42:08.698Z,1543902128.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:42:08.698Z,1543902128.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:42:08.699Z,1543902128.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:42:08.699Z,1543902128.699 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:42:08.699Z,1543902128.699 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:42:08.700Z,1543902128.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:42:13.015Z,1543902133.015 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:44:08.971Z,1543902248.971 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:44:08.972Z,1543902248.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-04T05:44:08.972Z,1543902248.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:44:08.974Z,1543902248.974 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:44:08.974Z,1543902248.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-04T05:44:08.974Z,1543902248.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:44:08.987Z,1543902248.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:44:08.988Z,1543902248.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:44:09.390Z,1543902249.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:44:09.390Z,1543902249.390 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-04T05:44:09.391Z,1543902249.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:44:09.391Z,1543902249.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-04T05:44:09.774Z,1543902249.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:44:09.775Z,1543902249.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:44:09.775Z,1543902249.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:44:09.775Z,1543902249.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:44:09.776Z,1543902249.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:44:09.776Z,1543902249.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:46:10.079Z,1543902370.079 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:46:10.079Z,1543902370.079 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-04T05:46:10.079Z,1543902370.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:46:10.081Z,1543902370.081 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:46:10.081Z,1543902370.081 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-04T05:46:10.081Z,1543902370.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:46:10.095Z,1543902370.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:46:10.095Z,1543902370.095 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:46:10.506Z,1543902370.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:46:10.510Z,1543902370.510 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-04T05:46:10.511Z,1543902370.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:46:10.511Z,1543902370.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-04T05:46:10.881Z,1543902370.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:46:10.882Z,1543902370.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:46:10.882Z,1543902370.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:46:10.883Z,1543902370.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:46:10.883Z,1543902370.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:46:10.883Z,1543902370.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:46:19.332Z,1543902379.332 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T05:41:17.9Z 2018-12-04T05:46:19.332Z,1543902379.332 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T05:46:19.332Z,1543902379.332 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T05:46:24.304Z,1543902384.304 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0147.lzma 2018-12-04T05:46:25.086Z,1543902385.086 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0147.lzma.bak 2018-12-04T05:46:25.086Z,1543902385.086 [DataOverHttps](INFO): SBD MOMSN=8963090 2018-12-04T05:46:34.528Z,1543902394.528 [DataOverHttps](INFO): Sending 316 bytes from file Logs/20181203T211451/Express0148.lzma 2018-12-04T05:46:35.317Z,1543902395.317 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0148.lzma.bak 2018-12-04T05:46:35.318Z,1543902395.318 [DataOverHttps](INFO): SBD MOMSN=8963092 2018-12-04T05:46:36.674Z,1543902396.674 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T05:46:36.674Z,1543902396.674 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T05:46:36.674Z,1543902396.674 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T05:47:15.924Z,1543902435.924 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T05:47:46.723Z,1543902466.723 [NAL9602](INFO): Powering down 2018-12-04T05:48:11.102Z,1543902491.102 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:48:11.102Z,1543902491.102 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-04T05:48:11.102Z,1543902491.102 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:48:11.104Z,1543902491.104 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:48:11.104Z,1543902491.104 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-04T05:48:11.105Z,1543902491.105 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:48:11.118Z,1543902491.118 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:48:11.119Z,1543902491.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:48:11.514Z,1543902491.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:48:11.514Z,1543902491.514 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-04T05:48:11.515Z,1543902491.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:48:11.515Z,1543902491.515 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-04T05:48:11.894Z,1543902491.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:48:11.894Z,1543902491.894 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:48:11.895Z,1543902491.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:48:11.895Z,1543902491.895 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:48:11.895Z,1543902491.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:48:11.896Z,1543902491.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:50:12.001Z,1543902612.001 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:50:12.001Z,1543902612.001 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-04T05:50:12.001Z,1543902612.001 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:50:12.003Z,1543902612.003 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:50:12.003Z,1543902612.003 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-04T05:50:12.004Z,1543902612.004 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:50:12.017Z,1543902612.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:50:12.017Z,1543902612.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:50:12.416Z,1543902612.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:50:12.416Z,1543902612.416 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-04T05:50:12.416Z,1543902612.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:50:12.416Z,1543902612.416 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-04T05:50:12.802Z,1543902612.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:50:12.802Z,1543902612.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:50:12.803Z,1543902612.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:50:12.803Z,1543902612.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:50:12.804Z,1543902612.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:50:12.804Z,1543902612.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:51:37.109Z,1543902697.109 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T05:51:37.109Z,1543902697.109 [Default:CheckIn:C.Wait] Stopped 2018-12-04T05:51:37.109Z,1543902697.109 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T05:51:37.109Z,1543902697.109 [Default:CheckIn:D] Running Loop=1 2018-12-04T05:51:37.505Z,1543902697.505 [Default:CheckIn:D] Stopped 2018-12-04T05:51:37.505Z,1543902697.505 [Default:CheckIn:E] Running Loop=1 2018-12-04T05:51:37.905Z,1543902697.905 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 516.758040 min 2018-12-04T05:51:37.905Z,1543902697.905 [Default:CheckIn:E] Stopped 2018-12-04T05:51:37.905Z,1543902697.905 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T05:51:37.905Z,1543902697.905 [Default:CheckIn] Stopped 2018-12-04T05:51:37.905Z,1543902697.905 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T05:51:37.906Z,1543902697.906 [Default:CheckIn](INFO): Running loop #51 2018-12-04T05:51:37.906Z,1543902697.906 [Default:CheckIn] Running Loop=51 2018-12-04T05:51:37.906Z,1543902697.906 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T05:51:37.906Z,1543902697.906 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T05:51:38.675Z,1543902698.675 [NAL9602](INFO): Powering up 2018-12-04T05:51:49.876Z,1543902709.876 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:52:13.050Z,1543902733.050 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:52:13.050Z,1543902733.050 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-04T05:52:13.050Z,1543902733.050 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:52:13.052Z,1543902733.052 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:52:13.052Z,1543902733.052 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-04T05:52:13.053Z,1543902733.053 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:52:13.066Z,1543902733.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:52:13.066Z,1543902733.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:52:13.472Z,1543902733.472 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:52:13.472Z,1543902733.472 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-04T05:52:13.473Z,1543902733.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:52:13.473Z,1543902733.473 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-04T05:52:13.839Z,1543902733.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:52:13.839Z,1543902733.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:52:13.840Z,1543902733.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:52:13.840Z,1543902733.840 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:52:13.841Z,1543902733.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:52:13.841Z,1543902733.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:52:21.824Z,1543902741.824 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T05:52:21.898Z,1543902741.898 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T05:52:21.898Z,1543902741.898 [NAL9602] Data Fault, FailCount= 4 2018-12-04T05:52:21.898Z,1543902741.898 [NAL9602](ERROR): Data Fault 2018-12-04T05:52:21.966Z,1543902741.966 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:52:22.220Z,1543902742.220 [NAL9602](INFO): Powering down 2018-12-04T05:52:23.060Z,1543902743.060 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:52:23.060Z,1543902743.060 [NAL9602] No Fault, FailCount= 4 2018-12-04T05:52:52.328Z,1543902772.328 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:53:03.528Z,1543902783.528 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:53:04.336Z,1543902784.336 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T05:53:04.336Z,1543902784.336 [NAL9602] Data Fault, FailCount= 5 2018-12-04T05:53:04.336Z,1543902784.336 [NAL9602](ERROR): Data Fault 2018-12-04T05:53:04.397Z,1543902784.397 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T05:53:04.398Z,1543902784.398 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T05:53:07.484Z,1543902787.484 [NAL9602](INFO): Powering down 2018-12-04T05:53:07.529Z,1543902787.529 [CBIT](INFO): Critical error at 20181204T055304 2018-12-04T05:54:14.033Z,1543902854.033 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:54:14.033Z,1543902854.033 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-04T05:54:14.034Z,1543902854.034 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:54:14.036Z,1543902854.036 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:54:14.036Z,1543902854.036 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-04T05:54:14.036Z,1543902854.036 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:54:14.049Z,1543902854.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:54:14.049Z,1543902854.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:54:14.445Z,1543902854.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:54:14.445Z,1543902854.445 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-04T05:54:14.446Z,1543902854.446 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:54:14.446Z,1543902854.446 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-04T05:54:14.839Z,1543902854.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:54:14.839Z,1543902854.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:54:14.840Z,1543902854.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:54:14.840Z,1543902854.840 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:54:14.840Z,1543902854.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:54:14.841Z,1543902854.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:55:04.358Z,1543902904.358 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T05:55:04.358Z,1543902904.358 [NAL9602] No Fault, FailCount= 5 2018-12-04T05:55:04.716Z,1543902904.716 [NAL9602](INFO): Powering up NAL9602 2018-12-04T05:55:15.923Z,1543902915.923 [NAL9602](INFO): NAL9602 initialized 2018-12-04T05:56:15.091Z,1543902975.091 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:56:15.091Z,1543902975.091 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-04T05:56:15.091Z,1543902975.091 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:56:15.093Z,1543902975.093 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:56:15.093Z,1543902975.093 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-04T05:56:15.093Z,1543902975.093 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:56:15.107Z,1543902975.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:56:15.107Z,1543902975.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:56:15.512Z,1543902975.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:56:15.512Z,1543902975.512 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-04T05:56:15.513Z,1543902975.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:56:15.513Z,1543902975.513 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-04T05:56:15.890Z,1543902975.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:56:15.890Z,1543902975.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:56:15.891Z,1543902975.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:56:15.891Z,1543902975.891 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:56:15.891Z,1543902975.891 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:56:15.892Z,1543902975.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:56:38.770Z,1543902998.770 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T05:51:37.9Z 2018-12-04T05:56:38.770Z,1543902998.770 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T05:56:38.771Z,1543902998.771 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T05:56:43.728Z,1543903003.728 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0150.lzma 2018-12-04T05:56:44.529Z,1543903004.529 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0150.lzma.bak 2018-12-04T05:56:44.529Z,1543903004.529 [DataOverHttps](INFO): SBD MOMSN=8963126 2018-12-04T05:56:53.902Z,1543903013.902 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T05:56:58.847Z,1543903018.847 [DataOverHttps](INFO): Sending 342 bytes from file Logs/20181203T211451/Express0151.lzma 2018-12-04T05:56:59.637Z,1543903019.637 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0151.lzma.bak 2018-12-04T05:56:59.637Z,1543903019.637 [DataOverHttps](INFO): SBD MOMSN=8963134 2018-12-04T05:57:00.931Z,1543903020.931 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T05:57:00.931Z,1543903020.931 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T05:57:00.931Z,1543903020.931 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T05:57:24.107Z,1543903044.107 [NAL9602](INFO): Powering down 2018-12-04T05:58:16.210Z,1543903096.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:58:16.211Z,1543903096.211 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-04T05:58:16.211Z,1543903096.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T05:58:16.213Z,1543903096.213 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T05:58:16.213Z,1543903096.213 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-04T05:58:16.213Z,1543903096.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T05:58:16.226Z,1543903096.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T05:58:16.227Z,1543903096.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T05:58:16.622Z,1543903096.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T05:58:16.622Z,1543903096.622 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-04T05:58:16.623Z,1543903096.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T05:58:16.623Z,1543903096.623 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-04T05:58:17.004Z,1543903097.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T05:58:17.005Z,1543903097.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:58:17.005Z,1543903097.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T05:58:17.006Z,1543903097.006 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T05:58:17.006Z,1543903097.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T05:58:17.007Z,1543903097.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:00:17.020Z,1543903217.020 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:00:17.020Z,1543903217.020 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-04T06:00:17.020Z,1543903217.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:00:17.023Z,1543903217.023 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:00:17.023Z,1543903217.023 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-04T06:00:17.023Z,1543903217.023 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:00:17.036Z,1543903217.036 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:00:17.036Z,1543903217.036 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:00:17.442Z,1543903217.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:00:17.443Z,1543903217.443 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-04T06:00:17.443Z,1543903217.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:00:17.443Z,1543903217.443 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-04T06:00:17.820Z,1543903217.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:00:17.821Z,1543903217.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:00:17.821Z,1543903217.821 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:00:17.821Z,1543903217.821 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:00:17.822Z,1543903217.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:00:17.822Z,1543903217.822 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:02:01.205Z,1543903321.205 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T06:02:01.205Z,1543903321.205 [Default:CheckIn:C.Wait] Stopped 2018-12-04T06:02:01.205Z,1543903321.205 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T06:02:01.205Z,1543903321.205 [Default:CheckIn:D] Running Loop=1 2018-12-04T06:02:01.599Z,1543903321.599 [Default:CheckIn:D] Stopped 2018-12-04T06:02:01.599Z,1543903321.599 [Default:CheckIn:E] Running Loop=1 2018-12-04T06:02:01.000Z,1543903322.000 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 527.159603 min 2018-12-04T06:02:02.000Z,1543903322.000 [Default:CheckIn:E] Stopped 2018-12-04T06:02:02.000Z,1543903322.000 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T06:02:02.000Z,1543903322.000 [Default:CheckIn] Stopped 2018-12-04T06:02:02.000Z,1543903322.000 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T06:02:02.001Z,1543903322.001 [Default:CheckIn](INFO): Running loop #52 2018-12-04T06:02:02.001Z,1543903322.001 [Default:CheckIn] Running Loop=52 2018-12-04T06:02:02.001Z,1543903322.001 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T06:02:02.001Z,1543903322.001 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T06:02:02.767Z,1543903322.767 [NAL9602](INFO): Powering up 2018-12-04T06:02:13.987Z,1543903333.987 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:02:18.015Z,1543903338.015 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:02:18.016Z,1543903338.016 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-04T06:02:18.016Z,1543903338.016 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:02:18.018Z,1543903338.018 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:02:18.018Z,1543903338.018 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-04T06:02:18.018Z,1543903338.018 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:02:18.031Z,1543903338.031 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:02:18.032Z,1543903338.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:02:18.408Z,1543903338.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:02:18.408Z,1543903338.408 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-04T06:02:18.409Z,1543903338.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:02:18.409Z,1543903338.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-04T06:02:21.556Z,1543903341.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:02:21.557Z,1543903341.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:02:21.557Z,1543903341.557 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:02:21.558Z,1543903341.558 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:02:21.558Z,1543903341.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:02:21.559Z,1543903341.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:02:45.588Z,1543903365.588 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T06:02:45.662Z,1543903365.662 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T06:02:45.662Z,1543903365.662 [NAL9602] Data Fault, FailCount= 1 2018-12-04T06:02:45.662Z,1543903365.662 [NAL9602](ERROR): Data Fault 2018-12-04T06:02:45.738Z,1543903365.738 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T06:02:45.988Z,1543903365.988 [NAL9602](INFO): Powering down 2018-12-04T06:02:46.825Z,1543903366.825 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T06:02:46.825Z,1543903366.825 [NAL9602] No Fault, FailCount= 1 2018-12-04T06:03:16.329Z,1543903396.329 [NAL9602](INFO): Powering up NAL9602 2018-12-04T06:03:27.132Z,1543903407.132 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:04:21.882Z,1543903461.882 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:04:21.882Z,1543903461.882 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-04T06:04:21.883Z,1543903461.883 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:04:21.885Z,1543903461.885 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:04:21.885Z,1543903461.885 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-04T06:04:21.885Z,1543903461.885 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:04:21.898Z,1543903461.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:04:21.898Z,1543903461.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:04:22.292Z,1543903462.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:04:22.292Z,1543903462.292 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-04T06:04:22.292Z,1543903462.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:04:22.292Z,1543903462.292 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-04T06:04:22.677Z,1543903462.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:04:22.677Z,1543903462.677 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:04:22.678Z,1543903462.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:04:22.678Z,1543903462.678 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:04:22.679Z,1543903462.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:04:22.679Z,1543903462.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:06:12.137Z,1543903572.137 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T06:06:12.137Z,1543903572.137 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T06:06:12.137Z,1543903572.137 [DropWeight](ERROR): Hardware Fault 2018-12-04T06:06:12.175Z,1543903572.175 [CBIT](INFO): Critical error at 20181204T060612 2018-12-04T06:06:12.177Z,1543903572.177 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T06:06:12.178Z,1543903572.178 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T06:06:12.578Z,1543903572.578 [CBIT](INFO): Critical error at 20181204T060612 2018-12-04T06:06:22.966Z,1543903582.966 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:06:22.966Z,1543903582.966 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-04T06:06:22.967Z,1543903582.967 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:06:22.969Z,1543903582.969 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:06:22.969Z,1543903582.969 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-04T06:06:22.969Z,1543903582.969 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:06:22.983Z,1543903582.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:06:22.983Z,1543903582.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:06:23.460Z,1543903583.460 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:06:23.460Z,1543903583.460 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-04T06:06:23.461Z,1543903583.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:06:23.461Z,1543903583.461 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-04T06:06:23.784Z,1543903583.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:06:23.784Z,1543903583.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:06:23.784Z,1543903583.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:06:23.785Z,1543903583.785 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:06:23.785Z,1543903583.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:06:23.786Z,1543903583.786 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:07:03.275Z,1543903623.275 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T06:02:02.0Z 2018-12-04T06:07:03.275Z,1543903623.275 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T06:07:03.275Z,1543903623.275 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T06:07:09.211Z,1543903629.211 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0153.lzma 2018-12-04T06:07:09.989Z,1543903629.989 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0153.lzma.bak 2018-12-04T06:07:09.990Z,1543903629.990 [DataOverHttps](INFO): SBD MOMSN=8963163 2018-12-04T06:07:19.449Z,1543903639.449 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T06:07:19.627Z,1543903639.627 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0154.lzma 2018-12-04T06:07:20.425Z,1543903640.425 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0154.lzma.bak 2018-12-04T06:07:20.426Z,1543903640.426 [DataOverHttps](INFO): SBD MOMSN=8963167 2018-12-04T06:07:21.719Z,1543903641.719 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T06:07:21.719Z,1543903641.719 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T06:07:21.719Z,1543903641.719 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T06:07:49.851Z,1543903669.851 [NAL9602](INFO): Powering down 2018-12-04T06:08:24.075Z,1543903704.075 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:08:24.075Z,1543903704.075 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-04T06:08:24.075Z,1543903704.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:08:24.077Z,1543903704.077 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:08:24.077Z,1543903704.077 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-04T06:08:24.077Z,1543903704.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:08:24.129Z,1543903704.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:08:24.130Z,1543903704.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:08:24.511Z,1543903704.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:08:24.511Z,1543903704.511 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-04T06:08:24.512Z,1543903704.512 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:08:24.512Z,1543903704.512 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-04T06:08:24.882Z,1543903704.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:08:24.883Z,1543903704.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:08:24.883Z,1543903704.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:08:24.883Z,1543903704.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:08:24.884Z,1543903704.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:08:24.884Z,1543903704.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:10:24.925Z,1543903824.925 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:10:24.925Z,1543903824.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-04T06:10:24.925Z,1543903824.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:10:24.928Z,1543903824.928 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:10:24.928Z,1543903824.928 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-04T06:10:24.928Z,1543903824.928 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:10:24.942Z,1543903824.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:10:24.942Z,1543903824.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:10:25.342Z,1543903825.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:10:25.342Z,1543903825.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-04T06:10:25.343Z,1543903825.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:10:25.343Z,1543903825.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-04T06:10:25.724Z,1543903825.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:10:25.725Z,1543903825.725 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:10:25.725Z,1543903825.725 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:10:25.725Z,1543903825.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:10:25.726Z,1543903825.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:10:25.726Z,1543903825.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:10:46.917Z,1543903846.917 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T06:12:22.064Z,1543903942.064 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T06:12:22.064Z,1543903942.064 [Default:CheckIn:C.Wait] Stopped 2018-12-04T06:12:22.065Z,1543903942.065 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T06:12:22.065Z,1543903942.065 [Default:CheckIn:D] Running Loop=1 2018-12-04T06:12:22.462Z,1543903942.462 [Default:CheckIn:D] Stopped 2018-12-04T06:12:22.462Z,1543903942.462 [Default:CheckIn:E] Running Loop=1 2018-12-04T06:12:22.871Z,1543903942.871 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 537.507324 min 2018-12-04T06:12:22.871Z,1543903942.871 [Default:CheckIn:E] Stopped 2018-12-04T06:12:22.871Z,1543903942.871 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T06:12:22.871Z,1543903942.871 [Default:CheckIn] Stopped 2018-12-04T06:12:22.871Z,1543903942.871 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T06:12:22.872Z,1543903942.872 [Default:CheckIn](INFO): Running loop #53 2018-12-04T06:12:22.872Z,1543903942.872 [Default:CheckIn] Running Loop=53 2018-12-04T06:12:22.872Z,1543903942.872 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T06:12:22.872Z,1543903942.872 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T06:12:23.635Z,1543903943.635 [NAL9602](INFO): Powering up 2018-12-04T06:12:26.059Z,1543903946.059 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:12:26.059Z,1543903946.059 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-04T06:12:26.059Z,1543903946.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:12:26.061Z,1543903946.061 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:12:26.061Z,1543903946.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-04T06:12:26.061Z,1543903946.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:12:26.075Z,1543903946.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:12:26.075Z,1543903946.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:12:26.478Z,1543903946.478 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:12:26.478Z,1543903946.478 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-04T06:12:26.479Z,1543903946.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:12:26.479Z,1543903946.479 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-04T06:12:26.861Z,1543903946.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:12:26.861Z,1543903946.861 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:12:26.862Z,1543903946.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:12:26.862Z,1543903946.862 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:12:26.863Z,1543903946.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:12:26.863Z,1543903946.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:12:34.836Z,1543903954.836 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:12:35.633Z,1543903955.633 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T06:12:35.633Z,1543903955.633 [NAL9602] Data Fault, FailCount= 2 2018-12-04T06:12:35.634Z,1543903955.634 [NAL9602](ERROR): Data Fault 2018-12-04T06:12:35.701Z,1543903955.701 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T06:12:36.035Z,1543903956.035 [NAL9602](INFO): Powering down 2018-12-04T06:12:36.879Z,1543903956.879 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T06:12:36.879Z,1543903956.879 [NAL9602] No Fault, FailCount= 2 2018-12-04T06:13:06.391Z,1543903986.391 [NAL9602](INFO): Powering up NAL9602 2018-12-04T06:13:17.711Z,1543903997.711 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:14:27.699Z,1543904067.699 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:14:27.699Z,1543904067.699 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-04T06:14:27.699Z,1543904067.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:14:27.701Z,1543904067.701 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:14:27.701Z,1543904067.701 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-04T06:14:27.701Z,1543904067.701 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:14:27.715Z,1543904067.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:14:27.715Z,1543904067.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:14:27.831Z,1543904067.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:14:27.831Z,1543904067.831 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-04T06:14:27.832Z,1543904067.832 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:14:27.832Z,1543904067.832 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-04T06:14:28.162Z,1543904068.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:14:28.162Z,1543904068.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:14:28.163Z,1543904068.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:14:28.163Z,1543904068.163 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:14:28.163Z,1543904068.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:14:28.164Z,1543904068.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:16:28.242Z,1543904188.242 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:16:28.243Z,1543904188.243 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-04T06:16:28.243Z,1543904188.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:16:28.245Z,1543904188.245 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:16:28.245Z,1543904188.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-04T06:16:28.245Z,1543904188.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:16:28.259Z,1543904188.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:16:28.259Z,1543904188.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:16:28.666Z,1543904188.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:16:28.666Z,1543904188.666 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-04T06:16:28.675Z,1543904188.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:16:28.675Z,1543904188.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-04T06:16:29.054Z,1543904189.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:16:29.055Z,1543904189.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:16:29.055Z,1543904189.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:16:29.055Z,1543904189.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:16:29.056Z,1543904189.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:16:29.056Z,1543904189.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:17:23.830Z,1543904243.830 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T06:12:22.9Z 2018-12-04T06:17:23.830Z,1543904243.830 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T06:17:23.831Z,1543904243.831 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T06:17:28.764Z,1543904248.764 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0156.lzma 2018-12-04T06:17:29.548Z,1543904249.548 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0156.lzma.bak 2018-12-04T06:17:29.549Z,1543904249.549 [DataOverHttps](INFO): SBD MOMSN=8963201 2018-12-04T06:17:39.433Z,1543904259.433 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0157.lzma 2018-12-04T06:17:40.233Z,1543904260.233 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0157.lzma.bak 2018-12-04T06:17:40.234Z,1543904260.234 [DataOverHttps](INFO): SBD MOMSN=8963203 2018-12-04T06:17:41.522Z,1543904261.522 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T06:17:41.522Z,1543904261.522 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T06:17:41.522Z,1543904261.522 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T06:18:20.667Z,1543904300.667 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T06:18:29.089Z,1543904309.089 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:18:29.089Z,1543904309.089 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-04T06:18:29.089Z,1543904309.089 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:18:29.091Z,1543904309.091 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:18:29.091Z,1543904309.091 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-04T06:18:29.091Z,1543904309.091 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:18:29.106Z,1543904309.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:18:29.106Z,1543904309.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:18:29.501Z,1543904309.501 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:18:29.501Z,1543904309.501 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-04T06:18:29.502Z,1543904309.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:18:29.502Z,1543904309.502 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-04T06:18:29.890Z,1543904309.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:18:29.890Z,1543904309.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:18:29.891Z,1543904309.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:18:29.891Z,1543904309.891 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:18:29.891Z,1543904309.891 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:18:29.892Z,1543904309.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:18:51.463Z,1543904331.463 [NAL9602](INFO): Powering down 2018-12-04T06:20:30.046Z,1543904430.046 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:20:30.047Z,1543904430.047 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-04T06:20:30.047Z,1543904430.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:20:30.049Z,1543904430.049 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:20:30.049Z,1543904430.049 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-04T06:20:30.049Z,1543904430.049 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:20:30.111Z,1543904430.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:20:30.111Z,1543904430.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:20:30.455Z,1543904430.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:20:30.455Z,1543904430.455 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-04T06:20:30.456Z,1543904430.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:20:30.456Z,1543904430.456 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-04T06:20:30.850Z,1543904430.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:20:30.850Z,1543904430.850 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:20:30.851Z,1543904430.851 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:20:30.851Z,1543904430.851 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:20:30.851Z,1543904430.851 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:20:30.852Z,1543904430.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:21:12.407Z,1543904472.407 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T06:21:12.407Z,1543904472.407 [DropWeight] No Fault, FailCount= 1 2018-12-04T06:22:30.867Z,1543904550.867 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:22:30.867Z,1543904550.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-04T06:22:30.867Z,1543904550.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:22:30.869Z,1543904550.869 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:22:30.869Z,1543904550.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-04T06:22:30.869Z,1543904550.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:22:30.882Z,1543904550.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:22:30.882Z,1543904550.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:22:31.285Z,1543904551.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:22:31.285Z,1543904551.285 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-04T06:22:31.286Z,1543904551.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:22:31.286Z,1543904551.286 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-04T06:22:31.674Z,1543904551.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:22:31.674Z,1543904551.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:22:31.675Z,1543904551.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:22:31.675Z,1543904551.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:22:31.675Z,1543904551.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:22:31.676Z,1543904551.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:22:41.674Z,1543904561.674 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T06:22:41.674Z,1543904561.674 [Default:CheckIn:C.Wait] Stopped 2018-12-04T06:22:41.674Z,1543904561.674 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T06:22:41.674Z,1543904561.674 [Default:CheckIn:D] Running Loop=1 2018-12-04T06:22:42.071Z,1543904562.071 [Default:CheckIn:D] Stopped 2018-12-04T06:22:42.071Z,1543904562.071 [Default:CheckIn:E] Running Loop=1 2018-12-04T06:22:42.478Z,1543904562.478 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 547.834115 min 2018-12-04T06:22:42.478Z,1543904562.478 [Default:CheckIn:E] Stopped 2018-12-04T06:22:42.478Z,1543904562.478 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T06:22:42.478Z,1543904562.478 [Default:CheckIn] Stopped 2018-12-04T06:22:42.479Z,1543904562.479 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T06:22:42.479Z,1543904562.479 [Default:CheckIn](INFO): Running loop #54 2018-12-04T06:22:42.479Z,1543904562.479 [Default:CheckIn] Running Loop=54 2018-12-04T06:22:42.479Z,1543904562.479 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T06:22:42.479Z,1543904562.479 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T06:22:43.241Z,1543904563.241 [NAL9602](INFO): Powering up 2018-12-04T06:22:54.044Z,1543904574.044 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:23:25.720Z,1543904605.720 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T06:23:25.802Z,1543904605.802 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T06:23:25.802Z,1543904605.802 [NAL9602] Data Fault, FailCount= 3 2018-12-04T06:23:25.802Z,1543904605.802 [NAL9602](ERROR): Data Fault 2018-12-04T06:23:25.841Z,1543904605.841 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T06:23:26.116Z,1543904606.116 [NAL9602](INFO): Powering down 2018-12-04T06:23:26.948Z,1543904606.948 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T06:23:26.948Z,1543904606.948 [NAL9602] No Fault, FailCount= 3 2018-12-04T06:23:56.503Z,1543904636.503 [NAL9602](INFO): Powering up NAL9602 2018-12-04T06:24:07.706Z,1543904647.706 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:24:08.504Z,1543904648.504 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T06:24:08.504Z,1543904648.504 [NAL9602] Data Fault, FailCount= 4 2018-12-04T06:24:08.504Z,1543904648.504 [NAL9602](ERROR): Data Fault 2018-12-04T06:24:08.545Z,1543904648.545 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T06:24:08.900Z,1543904648.900 [NAL9602](INFO): Powering down 2018-12-04T06:24:12.437Z,1543904652.437 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T06:24:12.437Z,1543904652.437 [NAL9602] No Fault, FailCount= 4 2018-12-04T06:24:31.682Z,1543904671.682 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:24:31.682Z,1543904671.682 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-04T06:24:31.682Z,1543904671.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:24:31.684Z,1543904671.684 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:24:31.685Z,1543904671.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-04T06:24:31.685Z,1543904671.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:24:31.698Z,1543904671.698 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:24:31.699Z,1543904671.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:24:32.093Z,1543904672.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:24:32.093Z,1543904672.093 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-04T06:24:32.094Z,1543904672.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:24:32.094Z,1543904672.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-04T06:24:32.476Z,1543904672.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:24:32.476Z,1543904672.476 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:24:32.476Z,1543904672.476 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:24:32.477Z,1543904672.477 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:24:32.477Z,1543904672.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:24:32.478Z,1543904672.478 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:24:39.250Z,1543904679.250 [NAL9602](INFO): Powering up NAL9602 2018-12-04T06:24:50.412Z,1543904690.412 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:26:33.374Z,1543904793.374 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:26:33.375Z,1543904793.375 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-04T06:26:33.375Z,1543904793.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:26:33.377Z,1543904793.377 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:26:33.377Z,1543904793.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-04T06:26:33.377Z,1543904793.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:26:33.428Z,1543904793.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:26:33.428Z,1543904793.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:26:33.503Z,1543904793.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:26:33.503Z,1543904793.503 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-04T06:26:33.504Z,1543904793.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:26:33.504Z,1543904793.504 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-04T06:26:33.878Z,1543904793.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:26:33.879Z,1543904793.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:26:33.879Z,1543904793.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:26:33.879Z,1543904793.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:26:33.880Z,1543904793.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:26:33.880Z,1543904793.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:27:43.763Z,1543904863.763 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T06:22:42.5Z 2018-12-04T06:27:43.763Z,1543904863.763 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T06:27:43.763Z,1543904863.763 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T06:27:48.705Z,1543904868.705 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0159.lzma 2018-12-04T06:27:49.497Z,1543904869.497 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0159.lzma.bak 2018-12-04T06:27:49.498Z,1543904869.498 [DataOverHttps](INFO): SBD MOMSN=8963232 2018-12-04T06:27:59.222Z,1543904879.222 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T06:27:59.295Z,1543904879.295 [DataOverHttps](INFO): Sending 339 bytes from file Logs/20181203T211451/Express0160.lzma 2018-12-04T06:28:00.069Z,1543904880.069 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0160.lzma.bak 2018-12-04T06:28:00.069Z,1543904880.069 [DataOverHttps](INFO): SBD MOMSN=8963234 2018-12-04T06:28:01.354Z,1543904881.354 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T06:28:01.354Z,1543904881.354 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T06:28:01.354Z,1543904881.354 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T06:28:29.420Z,1543904909.420 [NAL9602](INFO): Powering down 2018-12-04T06:28:34.251Z,1543904914.251 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:28:34.251Z,1543904914.251 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-04T06:28:34.251Z,1543904914.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:28:34.253Z,1543904914.253 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:28:34.253Z,1543904914.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-04T06:28:34.253Z,1543904914.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:28:34.266Z,1543904914.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:28:34.267Z,1543904914.267 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:28:34.663Z,1543904914.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:28:34.663Z,1543904914.663 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-04T06:28:34.663Z,1543904914.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:28:34.664Z,1543904914.664 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-04T06:28:35.053Z,1543904915.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:28:35.054Z,1543904915.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:28:35.054Z,1543904915.054 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:28:35.055Z,1543904915.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:28:35.055Z,1543904915.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:28:35.056Z,1543904915.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:30:35.414Z,1543905035.414 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:30:35.414Z,1543905035.414 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-04T06:30:35.415Z,1543905035.415 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:30:35.417Z,1543905035.417 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:30:35.417Z,1543905035.417 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-04T06:30:35.417Z,1543905035.417 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:30:35.431Z,1543905035.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:30:35.431Z,1543905035.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:30:35.830Z,1543905035.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:30:35.830Z,1543905035.830 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-04T06:30:35.831Z,1543905035.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:30:35.831Z,1543905035.831 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-04T06:30:36.211Z,1543905036.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:30:36.211Z,1543905036.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:30:36.212Z,1543905036.212 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:30:36.212Z,1543905036.212 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:30:36.213Z,1543905036.213 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:30:36.213Z,1543905036.213 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:32:36.387Z,1543905156.387 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:32:36.387Z,1543905156.387 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-04T06:32:36.387Z,1543905156.387 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:32:36.389Z,1543905156.389 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:32:36.389Z,1543905156.389 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-04T06:32:36.389Z,1543905156.389 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:32:36.404Z,1543905156.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:32:36.404Z,1543905156.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:32:36.802Z,1543905156.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:32:36.802Z,1543905156.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-04T06:32:36.802Z,1543905156.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:32:36.802Z,1543905156.802 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-04T06:32:37.181Z,1543905157.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:32:37.181Z,1543905157.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:32:37.182Z,1543905157.182 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:32:37.182Z,1543905157.182 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:32:37.183Z,1543905157.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:32:37.183Z,1543905157.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:33:01.549Z,1543905181.549 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T06:33:01.550Z,1543905181.550 [Default:CheckIn:C.Wait] Stopped 2018-12-04T06:33:01.550Z,1543905181.550 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T06:33:01.550Z,1543905181.550 [Default:CheckIn:D] Running Loop=1 2018-12-04T06:33:01.954Z,1543905181.954 [Default:CheckIn:D] Stopped 2018-12-04T06:33:01.954Z,1543905181.954 [Default:CheckIn:E] Running Loop=1 2018-12-04T06:33:02.348Z,1543905182.348 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 558.165560 min 2018-12-04T06:33:02.348Z,1543905182.348 [Default:CheckIn:E] Stopped 2018-12-04T06:33:02.348Z,1543905182.348 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T06:33:02.348Z,1543905182.348 [Default:CheckIn] Stopped 2018-12-04T06:33:02.348Z,1543905182.348 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T06:33:02.349Z,1543905182.349 [Default:CheckIn](INFO): Running loop #55 2018-12-04T06:33:02.349Z,1543905182.349 [Default:CheckIn] Running Loop=55 2018-12-04T06:33:02.349Z,1543905182.349 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T06:33:02.349Z,1543905182.349 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T06:33:03.120Z,1543905183.120 [NAL9602](INFO): Powering up 2018-12-04T06:33:14.320Z,1543905194.320 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:33:46.280Z,1543905226.280 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T06:33:46.358Z,1543905226.358 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T06:33:46.358Z,1543905226.358 [NAL9602] Data Fault, FailCount= 5 2018-12-04T06:33:46.358Z,1543905226.358 [NAL9602](ERROR): Data Fault 2018-12-04T06:33:46.428Z,1543905226.428 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T06:33:46.429Z,1543905226.429 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T06:33:46.684Z,1543905226.684 [NAL9602](INFO): Powering down 2018-12-04T06:33:46.749Z,1543905226.749 [CBIT](INFO): Critical error at 20181204T063346 2018-12-04T06:34:37.575Z,1543905277.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:34:37.575Z,1543905277.575 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-04T06:34:37.575Z,1543905277.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:34:37.577Z,1543905277.577 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:34:37.577Z,1543905277.577 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-04T06:34:37.577Z,1543905277.577 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:34:37.591Z,1543905277.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:34:37.591Z,1543905277.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:34:37.988Z,1543905277.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:34:37.988Z,1543905277.988 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-04T06:34:37.989Z,1543905277.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:34:37.989Z,1543905277.989 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-04T06:34:38.373Z,1543905278.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:34:38.374Z,1543905278.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:34:38.374Z,1543905278.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:34:38.374Z,1543905278.374 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:34:38.375Z,1543905278.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:34:38.375Z,1543905278.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:35:46.454Z,1543905346.454 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T06:35:46.454Z,1543905346.454 [NAL9602] No Fault, FailCount= 5 2018-12-04T06:35:46.808Z,1543905346.808 [NAL9602](INFO): Powering up NAL9602 2018-12-04T06:35:58.008Z,1543905358.008 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:35:58.808Z,1543905358.808 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T06:35:58.808Z,1543905358.808 [NAL9602] Data Fault, FailCount= 1 2018-12-04T06:35:58.808Z,1543905358.808 [NAL9602](ERROR): Data Fault 2018-12-04T06:35:58.868Z,1543905358.868 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T06:35:59.208Z,1543905359.208 [NAL9602](INFO): Powering down 2018-12-04T06:36:00.057Z,1543905360.057 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T06:36:00.057Z,1543905360.057 [NAL9602] No Fault, FailCount= 1 2018-12-04T06:36:29.576Z,1543905389.576 [NAL9602](INFO): Powering up NAL9602 2018-12-04T06:36:38.399Z,1543905398.399 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:36:38.399Z,1543905398.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-04T06:36:38.399Z,1543905398.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:36:38.401Z,1543905398.401 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:36:38.401Z,1543905398.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-04T06:36:38.401Z,1543905398.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:36:38.414Z,1543905398.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:36:38.415Z,1543905398.415 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:36:38.822Z,1543905398.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:36:38.827Z,1543905398.827 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-04T06:36:38.827Z,1543905398.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:36:38.828Z,1543905398.828 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-04T06:36:39.205Z,1543905399.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:36:39.206Z,1543905399.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:36:39.206Z,1543905399.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:36:39.207Z,1543905399.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:36:39.207Z,1543905399.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:36:39.207Z,1543905399.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:36:40.776Z,1543905400.776 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:38:03.618Z,1543905483.618 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T06:33:02.3Z 2018-12-04T06:38:03.618Z,1543905483.618 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T06:38:03.618Z,1543905483.618 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T06:38:08.645Z,1543905488.645 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0162.lzma 2018-12-04T06:38:09.437Z,1543905489.437 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0162.lzma.bak 2018-12-04T06:38:09.437Z,1543905489.437 [DataOverHttps](INFO): SBD MOMSN=8963263 2018-12-04T06:38:19.094Z,1543905499.094 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T06:38:19.596Z,1543905499.596 [DataOverHttps](INFO): Sending 344 bytes from file Logs/20181203T211451/Express0163.lzma 2018-12-04T06:38:20.393Z,1543905500.393 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0163.lzma.bak 2018-12-04T06:38:20.393Z,1543905500.393 [DataOverHttps](INFO): SBD MOMSN=8963266 2018-12-04T06:38:21.687Z,1543905501.687 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T06:38:21.687Z,1543905501.687 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T06:38:21.687Z,1543905501.687 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T06:38:39.442Z,1543905519.442 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:38:39.442Z,1543905519.442 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-04T06:38:39.442Z,1543905519.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:38:39.444Z,1543905519.444 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:38:39.445Z,1543905519.445 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-04T06:38:39.445Z,1543905519.445 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:38:39.458Z,1543905519.458 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:38:39.459Z,1543905519.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:38:39.853Z,1543905519.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:38:39.853Z,1543905519.853 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-04T06:38:39.853Z,1543905519.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:38:39.854Z,1543905519.854 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-04T06:38:40.238Z,1543905520.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:38:40.239Z,1543905520.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:38:40.239Z,1543905520.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:38:40.240Z,1543905520.240 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:38:40.240Z,1543905520.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:38:40.240Z,1543905520.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:38:49.411Z,1543905529.411 [NAL9602](INFO): Powering down 2018-12-04T06:40:40.614Z,1543905640.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:40:40.614Z,1543905640.614 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-04T06:40:40.614Z,1543905640.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:40:40.616Z,1543905640.616 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:40:40.616Z,1543905640.616 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-04T06:40:40.617Z,1543905640.617 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:40:40.630Z,1543905640.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:40:40.631Z,1543905640.631 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:40:40.631Z,1543905640.631 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:40:40.631Z,1543905640.631 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:43:21.887Z,1543905801.887 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T06:43:21.888Z,1543905801.888 [Default:CheckIn:C.Wait] Stopped 2018-12-04T06:43:21.888Z,1543905801.888 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T06:43:21.888Z,1543905801.888 [Default:CheckIn:D] Running Loop=1 2018-12-04T06:43:22.283Z,1543905802.283 [Default:CheckIn:D] Stopped 2018-12-04T06:43:22.283Z,1543905802.283 [Default:CheckIn:E] Running Loop=1 2018-12-04T06:43:22.686Z,1543905802.686 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 568.504362 min 2018-12-04T06:43:22.686Z,1543905802.686 [Default:CheckIn:E] Stopped 2018-12-04T06:43:22.686Z,1543905802.686 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T06:43:22.687Z,1543905802.687 [Default:CheckIn] Stopped 2018-12-04T06:43:22.687Z,1543905802.687 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T06:43:22.687Z,1543905802.687 [Default:CheckIn](INFO): Running loop #56 2018-12-04T06:43:22.687Z,1543905802.687 [Default:CheckIn] Running Loop=56 2018-12-04T06:43:22.687Z,1543905802.687 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T06:43:22.687Z,1543905802.687 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T06:43:23.464Z,1543905803.464 [NAL9602](INFO): Powering up 2018-12-04T06:43:34.660Z,1543905814.660 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:44:06.624Z,1543905846.624 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T06:44:06.698Z,1543905846.698 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T06:44:06.699Z,1543905846.699 [NAL9602] Data Fault, FailCount= 2 2018-12-04T06:44:06.699Z,1543905846.699 [NAL9602](ERROR): Data Fault 2018-12-04T06:44:06.733Z,1543905846.733 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T06:44:07.024Z,1543905847.024 [NAL9602](INFO): Powering down 2018-12-04T06:44:07.865Z,1543905847.865 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T06:44:07.865Z,1543905847.865 [NAL9602] No Fault, FailCount= 2 2018-12-04T06:44:37.136Z,1543905877.136 [NAL9602](INFO): Powering up NAL9602 2018-12-04T06:44:48.345Z,1543905888.345 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:48:24.079Z,1543906104.079 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T06:43:22.7Z 2018-12-04T06:48:24.079Z,1543906104.079 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T06:48:24.079Z,1543906104.079 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T06:48:28.993Z,1543906108.993 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0165.lzma 2018-12-04T06:48:29.793Z,1543906109.793 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0165.lzma.bak 2018-12-04T06:48:29.793Z,1543906109.793 [DataOverHttps](INFO): SBD MOMSN=8963298 2018-12-04T06:48:39.158Z,1543906119.158 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T06:48:39.201Z,1543906119.201 [DataOverHttps](INFO): Sending 373 bytes from file Logs/20181203T211451/Express0166.lzma 2018-12-04T06:48:40.001Z,1543906120.001 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0166.lzma.bak 2018-12-04T06:48:40.001Z,1543906120.001 [DataOverHttps](INFO): SBD MOMSN=8963300 2018-12-04T06:48:41.300Z,1543906121.300 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T06:48:41.300Z,1543906121.300 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T06:48:41.300Z,1543906121.300 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T06:49:09.344Z,1543906149.344 [NAL9602](INFO): Powering down 2018-12-04T06:51:13.790Z,1543906273.790 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T06:51:13.790Z,1543906273.790 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T06:51:13.791Z,1543906273.791 [DropWeight](ERROR): Hardware Fault 2018-12-04T06:51:13.823Z,1543906273.823 [CBIT](INFO): Critical error at 20181204T065113 2018-12-04T06:51:13.826Z,1543906273.826 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T06:51:13.826Z,1543906273.826 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T06:51:14.220Z,1543906274.220 [CBIT](INFO): Critical error at 20181204T065113 2018-12-04T06:53:41.774Z,1543906421.774 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T06:53:41.775Z,1543906421.775 [Default:CheckIn:C.Wait] Stopped 2018-12-04T06:53:41.775Z,1543906421.775 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T06:53:41.775Z,1543906421.775 [Default:CheckIn:D] Running Loop=1 2018-12-04T06:53:42.179Z,1543906422.179 [Default:CheckIn:D] Stopped 2018-12-04T06:53:42.179Z,1543906422.179 [Default:CheckIn:E] Running Loop=1 2018-12-04T06:53:42.580Z,1543906422.580 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 578.835938 min 2018-12-04T06:53:42.580Z,1543906422.580 [Default:CheckIn:E] Stopped 2018-12-04T06:53:42.580Z,1543906422.580 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T06:53:42.580Z,1543906422.580 [Default:CheckIn] Stopped 2018-12-04T06:53:42.580Z,1543906422.580 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T06:53:42.580Z,1543906422.580 [Default:CheckIn](INFO): Running loop #57 2018-12-04T06:53:42.580Z,1543906422.580 [Default:CheckIn] Running Loop=57 2018-12-04T06:53:42.581Z,1543906422.581 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T06:53:42.581Z,1543906422.581 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T06:53:43.355Z,1543906423.355 [NAL9602](INFO): Powering up 2018-12-04T06:53:54.552Z,1543906434.552 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:53:55.352Z,1543906435.352 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T06:53:55.352Z,1543906435.352 [NAL9602] Data Fault, FailCount= 3 2018-12-04T06:53:55.352Z,1543906435.352 [NAL9602](ERROR): Data Fault 2018-12-04T06:53:55.413Z,1543906435.413 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T06:53:55.749Z,1543906435.749 [NAL9602](INFO): Powering down 2018-12-04T06:53:56.604Z,1543906436.604 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T06:53:56.604Z,1543906436.604 [NAL9602] No Fault, FailCount= 3 2018-12-04T06:54:25.817Z,1543906465.817 [NAL9602](INFO): Powering up NAL9602 2018-12-04T06:54:37.368Z,1543906477.368 [NAL9602](INFO): NAL9602 initialized 2018-12-04T06:55:40.982Z,1543906540.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:55:40.982Z,1543906540.982 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-04T06:55:40.983Z,1543906540.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:55:40.983Z,1543906540.983 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-04T06:55:41.369Z,1543906541.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:55:41.369Z,1543906541.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:55:41.369Z,1543906541.369 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:55:41.370Z,1543906541.370 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:55:41.371Z,1543906541.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:55:41.371Z,1543906541.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:57:41.557Z,1543906661.557 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:57:41.557Z,1543906661.557 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-04T06:57:41.557Z,1543906661.557 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:57:41.560Z,1543906661.560 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:57:41.560Z,1543906661.560 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-04T06:57:41.560Z,1543906661.560 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:57:41.574Z,1543906661.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:57:41.574Z,1543906661.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:57:42.006Z,1543906662.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:57:42.006Z,1543906662.006 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-04T06:57:42.007Z,1543906662.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:57:42.007Z,1543906662.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-04T06:57:42.354Z,1543906662.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:57:42.354Z,1543906662.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:57:42.355Z,1543906662.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:57:42.366Z,1543906662.366 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:57:42.367Z,1543906662.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:57:42.367Z,1543906662.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:58:43.057Z,1543906723.057 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T06:53:42.6Z 2018-12-04T06:58:43.057Z,1543906723.057 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T06:58:43.057Z,1543906723.057 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T06:58:48.170Z,1543906728.170 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0168.lzma 2018-12-04T06:58:48.961Z,1543906728.961 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0168.lzma.bak 2018-12-04T06:58:48.962Z,1543906728.962 [DataOverHttps](INFO): SBD MOMSN=8963326 2018-12-04T06:58:58.379Z,1543906738.379 [DataOverHttps](INFO): Sending 268 bytes from file Logs/20181203T211451/Express0169.lzma 2018-12-04T06:58:59.149Z,1543906739.149 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0169.lzma.bak 2018-12-04T06:58:59.150Z,1543906739.150 [DataOverHttps](INFO): SBD MOMSN=8963330 2018-12-04T06:59:00.443Z,1543906740.443 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T06:59:00.443Z,1543906740.443 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T06:59:00.443Z,1543906740.443 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T06:59:40.247Z,1543906780.247 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T06:59:42.667Z,1543906782.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:59:42.667Z,1543906782.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-04T06:59:42.667Z,1543906782.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T06:59:42.669Z,1543906782.669 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T06:59:42.669Z,1543906782.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-04T06:59:42.670Z,1543906782.670 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T06:59:42.683Z,1543906782.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T06:59:42.684Z,1543906782.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T06:59:43.074Z,1543906783.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T06:59:43.074Z,1543906783.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-04T06:59:43.075Z,1543906783.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T06:59:43.075Z,1543906783.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-04T06:59:43.467Z,1543906783.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T06:59:43.467Z,1543906783.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:59:43.467Z,1543906783.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T06:59:43.468Z,1543906783.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T06:59:43.468Z,1543906783.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T06:59:43.468Z,1543906783.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:00:11.035Z,1543906811.035 [NAL9602](INFO): Powering down 2018-12-04T07:01:43.791Z,1543906903.791 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:01:43.791Z,1543906903.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-04T07:01:43.791Z,1543906903.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:01:43.793Z,1543906903.793 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:01:43.793Z,1543906903.793 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-04T07:01:43.794Z,1543906903.794 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:01:43.807Z,1543906903.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:01:43.807Z,1543906903.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:01:44.210Z,1543906904.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:01:44.210Z,1543906904.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-04T07:01:44.211Z,1543906904.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:01:44.211Z,1543906904.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-04T07:01:44.590Z,1543906904.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:01:44.590Z,1543906904.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:01:44.591Z,1543906904.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:01:44.591Z,1543906904.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:01:44.591Z,1543906904.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:01:44.592Z,1543906904.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:03:45.830Z,1543907025.830 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:03:45.830Z,1543907025.830 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-04T07:03:45.830Z,1543907025.830 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:03:45.832Z,1543907025.832 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:03:45.832Z,1543907025.832 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-04T07:03:45.833Z,1543907025.833 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:03:45.846Z,1543907025.846 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:03:45.846Z,1543907025.846 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:03:45.991Z,1543907025.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:03:45.991Z,1543907025.991 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-04T07:03:45.992Z,1543907025.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:03:45.992Z,1543907025.992 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-04T07:03:46.288Z,1543907026.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:03:46.288Z,1543907026.288 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:03:46.289Z,1543907026.289 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:03:46.289Z,1543907026.289 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:03:46.289Z,1543907026.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:03:46.290Z,1543907026.290 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:04:00.681Z,1543907040.681 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T07:04:00.682Z,1543907040.682 [Default:CheckIn:C.Wait] Stopped 2018-12-04T07:04:00.682Z,1543907040.682 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T07:04:00.682Z,1543907040.682 [Default:CheckIn:D] Running Loop=1 2018-12-04T07:04:01.083Z,1543907041.083 [Default:CheckIn:D] Stopped 2018-12-04T07:04:01.083Z,1543907041.083 [Default:CheckIn:E] Running Loop=1 2018-12-04T07:04:01.480Z,1543907041.480 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 589.151042 min 2018-12-04T07:04:01.480Z,1543907041.480 [Default:CheckIn:E] Stopped 2018-12-04T07:04:01.480Z,1543907041.480 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T07:04:01.480Z,1543907041.480 [Default:CheckIn] Stopped 2018-12-04T07:04:01.481Z,1543907041.481 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T07:04:01.481Z,1543907041.481 [Default:CheckIn](INFO): Running loop #58 2018-12-04T07:04:01.481Z,1543907041.481 [Default:CheckIn] Running Loop=58 2018-12-04T07:04:01.481Z,1543907041.481 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T07:04:01.481Z,1543907041.481 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T07:04:02.263Z,1543907042.263 [NAL9602](INFO): Powering up 2018-12-04T07:04:13.463Z,1543907053.463 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:05:46.351Z,1543907146.351 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:05:46.351Z,1543907146.351 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-04T07:05:46.351Z,1543907146.351 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:05:46.353Z,1543907146.353 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:05:46.353Z,1543907146.353 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-04T07:05:46.354Z,1543907146.354 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:05:46.403Z,1543907146.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:05:46.403Z,1543907146.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:05:46.770Z,1543907146.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:05:46.770Z,1543907146.770 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-04T07:05:46.770Z,1543907146.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:05:46.771Z,1543907146.771 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-04T07:05:47.154Z,1543907147.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:05:47.154Z,1543907147.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:05:47.155Z,1543907147.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:05:47.155Z,1543907147.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:05:47.156Z,1543907147.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:05:47.156Z,1543907147.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:06:13.989Z,1543907173.989 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T07:06:13.990Z,1543907173.990 [DropWeight] No Fault, FailCount= 1 2018-12-04T07:07:47.199Z,1543907267.199 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:07:47.199Z,1543907267.199 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-04T07:07:47.199Z,1543907267.199 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:07:47.201Z,1543907267.201 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:07:47.202Z,1543907267.202 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-04T07:07:47.202Z,1543907267.202 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:07:47.252Z,1543907267.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:07:47.252Z,1543907267.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:07:47.614Z,1543907267.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:07:47.614Z,1543907267.614 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-04T07:07:47.648Z,1543907267.648 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:07:47.648Z,1543907267.648 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-04T07:07:47.994Z,1543907267.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:07:47.995Z,1543907267.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:07:47.995Z,1543907267.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:07:47.996Z,1543907267.996 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:07:47.996Z,1543907267.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:07:47.996Z,1543907267.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:09:02.681Z,1543907342.681 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T07:04:01.5Z 2018-12-04T07:09:02.681Z,1543907342.681 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T07:09:02.681Z,1543907342.681 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T07:09:03.707Z,1543907343.707 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0171.lzma 2018-12-04T07:09:04.165Z,1543907344.165 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0171.lzma.bak 2018-12-04T07:09:04.165Z,1543907344.165 [DataOverHttps](INFO): SBD MOMSN=8963351 2018-12-04T07:09:13.661Z,1543907353.661 [DataOverHttps](INFO): Sending 286 bytes from file Logs/20181203T211451/Express0172.lzma 2018-12-04T07:09:14.461Z,1543907354.461 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0172.lzma.bak 2018-12-04T07:09:14.462Z,1543907354.462 [DataOverHttps](INFO): SBD MOMSN=8963353 2018-12-04T07:09:15.796Z,1543907355.796 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T07:09:15.796Z,1543907355.796 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T07:09:15.796Z,1543907355.796 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T07:09:18.925Z,1543907358.925 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T07:09:48.218Z,1543907388.218 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:09:48.218Z,1543907388.218 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-04T07:09:48.218Z,1543907388.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:09:48.220Z,1543907388.220 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:09:48.220Z,1543907388.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-04T07:09:48.220Z,1543907388.220 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:09:48.233Z,1543907388.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:09:48.234Z,1543907388.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:09:48.639Z,1543907388.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:09:48.639Z,1543907388.639 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-04T07:09:48.639Z,1543907388.639 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:09:48.639Z,1543907388.639 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-04T07:09:49.014Z,1543907389.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:09:49.029Z,1543907389.029 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:09:49.030Z,1543907389.030 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:09:49.030Z,1543907389.030 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:09:49.031Z,1543907389.031 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:09:49.031Z,1543907389.031 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:09:49.383Z,1543907389.383 [NAL9602](INFO): Powering down 2018-12-04T07:11:49.347Z,1543907509.347 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:11:49.347Z,1543907509.347 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-04T07:11:49.347Z,1543907509.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:11:49.349Z,1543907509.349 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:11:49.349Z,1543907509.349 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-04T07:11:49.349Z,1543907509.349 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:11:49.385Z,1543907509.385 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:11:49.385Z,1543907509.385 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:11:49.779Z,1543907509.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:11:49.779Z,1543907509.779 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-04T07:11:49.780Z,1543907509.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:11:49.780Z,1543907509.780 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-04T07:11:50.154Z,1543907510.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:11:50.168Z,1543907510.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:11:50.169Z,1543907510.169 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:11:50.169Z,1543907510.169 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:11:50.169Z,1543907510.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:11:50.170Z,1543907510.170 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:13:50.302Z,1543907630.302 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:13:50.302Z,1543907630.302 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-04T07:13:50.303Z,1543907630.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:13:50.305Z,1543907630.305 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:13:50.305Z,1543907630.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-04T07:13:50.305Z,1543907630.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:13:50.319Z,1543907630.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:13:50.319Z,1543907630.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:13:50.714Z,1543907630.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:13:50.714Z,1543907630.714 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-04T07:13:50.714Z,1543907630.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:13:50.715Z,1543907630.715 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-04T07:13:51.102Z,1543907631.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:13:51.102Z,1543907631.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:13:51.103Z,1543907631.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:13:51.103Z,1543907631.103 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:13:51.103Z,1543907631.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:13:51.104Z,1543907631.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:14:16.282Z,1543907656.282 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T07:14:16.282Z,1543907656.282 [Default:CheckIn:C.Wait] Stopped 2018-12-04T07:14:16.282Z,1543907656.282 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T07:14:16.282Z,1543907656.282 [Default:CheckIn:D] Running Loop=1 2018-12-04T07:14:16.676Z,1543907656.676 [Default:CheckIn:D] Stopped 2018-12-04T07:14:16.676Z,1543907656.676 [Default:CheckIn:E] Running Loop=1 2018-12-04T07:14:17.083Z,1543907657.083 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 599.410872 min 2018-12-04T07:14:17.083Z,1543907657.083 [Default:CheckIn:E] Stopped 2018-12-04T07:14:17.083Z,1543907657.083 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T07:14:17.083Z,1543907657.083 [Default:CheckIn] Stopped 2018-12-04T07:14:17.083Z,1543907657.083 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T07:14:17.084Z,1543907657.084 [Default:CheckIn](INFO): Running loop #59 2018-12-04T07:14:17.084Z,1543907657.084 [Default:CheckIn] Running Loop=59 2018-12-04T07:14:17.084Z,1543907657.084 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T07:14:17.084Z,1543907657.084 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T07:14:17.847Z,1543907657.847 [NAL9602](INFO): Powering up 2018-12-04T07:14:28.652Z,1543907668.652 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:14:29.448Z,1543907669.448 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T07:14:29.448Z,1543907669.448 [NAL9602] Data Fault, FailCount= 4 2018-12-04T07:14:29.448Z,1543907669.448 [NAL9602](ERROR): Data Fault 2018-12-04T07:14:29.516Z,1543907669.516 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T07:14:29.848Z,1543907669.848 [NAL9602](INFO): Powering down 2018-12-04T07:14:30.720Z,1543907670.720 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T07:14:30.720Z,1543907670.720 [NAL9602] No Fault, FailCount= 4 2018-12-04T07:14:59.876Z,1543907699.876 [NAL9602](INFO): Powering up NAL9602 2018-12-04T07:15:11.828Z,1543907711.828 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:15:51.347Z,1543907751.347 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:15:51.347Z,1543907751.347 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-04T07:15:51.347Z,1543907751.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:15:51.349Z,1543907751.349 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:15:51.349Z,1543907751.349 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-04T07:15:51.350Z,1543907751.350 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:15:51.363Z,1543907751.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:15:51.363Z,1543907751.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:15:51.778Z,1543907751.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:15:51.778Z,1543907751.778 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-04T07:15:51.778Z,1543907751.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:15:51.779Z,1543907751.779 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-04T07:15:52.162Z,1543907752.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:15:52.163Z,1543907752.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:15:52.163Z,1543907752.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:15:52.164Z,1543907752.164 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:15:52.164Z,1543907752.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:15:52.164Z,1543907752.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:17:52.210Z,1543907872.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:17:52.210Z,1543907872.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-04T07:17:52.210Z,1543907872.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:17:52.212Z,1543907872.212 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:17:52.213Z,1543907872.213 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-04T07:17:52.213Z,1543907872.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:17:52.226Z,1543907872.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:17:52.226Z,1543907872.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:17:52.624Z,1543907872.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:17:52.624Z,1543907872.624 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-04T07:17:52.624Z,1543907872.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:17:52.624Z,1543907872.624 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-04T07:17:53.003Z,1543907873.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:17:53.003Z,1543907873.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:17:53.004Z,1543907873.004 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:17:53.004Z,1543907873.004 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:17:53.004Z,1543907873.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:17:53.005Z,1543907873.005 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:18:15.792Z,1543907895.792 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T07:19:17.866Z,1543907957.866 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T07:14:17.1Z 2018-12-04T07:19:17.866Z,1543907957.866 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T07:19:17.866Z,1543907957.866 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T07:19:22.844Z,1543907962.844 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0174.lzma 2018-12-04T07:19:23.645Z,1543907963.645 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0174.lzma.bak 2018-12-04T07:19:23.645Z,1543907963.645 [DataOverHttps](INFO): SBD MOMSN=8963384 2018-12-04T07:19:33.205Z,1543907973.205 [DataOverHttps](INFO): Sending 301 bytes from file Logs/20181203T211451/Express0175.lzma 2018-12-04T07:19:34.005Z,1543907974.005 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0175.lzma.bak 2018-12-04T07:19:34.006Z,1543907974.006 [DataOverHttps](INFO): SBD MOMSN=8963386 2018-12-04T07:19:35.316Z,1543907975.316 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T07:19:35.316Z,1543907975.316 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T07:19:35.316Z,1543907975.316 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T07:19:53.398Z,1543907993.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:19:53.398Z,1543907993.398 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-04T07:19:53.398Z,1543907993.398 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:19:53.400Z,1543907993.400 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:19:53.400Z,1543907993.400 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-04T07:19:53.401Z,1543907993.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:19:53.414Z,1543907993.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:19:53.414Z,1543907993.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:19:53.822Z,1543907993.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:19:53.822Z,1543907993.822 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-04T07:19:53.823Z,1543907993.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:19:53.823Z,1543907993.823 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-04T07:19:54.214Z,1543907994.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:19:54.215Z,1543907994.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:19:54.215Z,1543907994.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:19:54.215Z,1543907994.215 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:19:54.216Z,1543907994.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:19:54.216Z,1543907994.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:20:15.351Z,1543908015.351 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T07:20:46.148Z,1543908046.148 [NAL9602](INFO): Powering down 2018-12-04T07:21:54.242Z,1543908114.242 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:21:54.242Z,1543908114.242 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-04T07:21:54.243Z,1543908114.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:21:54.245Z,1543908114.245 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:21:54.245Z,1543908114.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-04T07:21:54.245Z,1543908114.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:21:54.259Z,1543908114.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:21:54.259Z,1543908114.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:21:54.654Z,1543908114.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:21:54.654Z,1543908114.654 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-04T07:21:54.655Z,1543908114.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:21:54.655Z,1543908114.655 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-04T07:21:55.046Z,1543908115.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:21:55.047Z,1543908115.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:21:55.047Z,1543908115.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:21:55.048Z,1543908115.048 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:21:55.048Z,1543908115.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:21:55.048Z,1543908115.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:23:55.362Z,1543908235.362 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:23:55.362Z,1543908235.362 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-04T07:23:55.362Z,1543908235.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:23:55.365Z,1543908235.365 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:23:55.365Z,1543908235.365 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-04T07:23:55.365Z,1543908235.365 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:23:55.378Z,1543908235.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:23:55.378Z,1543908235.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:23:55.774Z,1543908235.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:23:55.774Z,1543908235.774 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-04T07:23:55.775Z,1543908235.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:23:55.775Z,1543908235.775 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-04T07:23:56.162Z,1543908236.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:23:56.162Z,1543908236.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:23:56.163Z,1543908236.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:23:56.163Z,1543908236.163 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:23:56.163Z,1543908236.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:23:56.164Z,1543908236.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:24:35.474Z,1543908275.474 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T07:24:35.475Z,1543908275.475 [Default:CheckIn:C.Wait] Stopped 2018-12-04T07:24:35.475Z,1543908275.475 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T07:24:35.475Z,1543908275.475 [Default:CheckIn:D] Running Loop=1 2018-12-04T07:24:35.873Z,1543908275.873 [Default:CheckIn:D] Stopped 2018-12-04T07:24:35.873Z,1543908275.873 [Default:CheckIn:E] Running Loop=1 2018-12-04T07:24:36.274Z,1543908276.274 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 609.730859 min 2018-12-04T07:24:36.274Z,1543908276.274 [Default:CheckIn:E] Stopped 2018-12-04T07:24:36.274Z,1543908276.274 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T07:24:36.275Z,1543908276.275 [Default:CheckIn] Stopped 2018-12-04T07:24:36.275Z,1543908276.275 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T07:24:36.275Z,1543908276.275 [Default:CheckIn](INFO): Running loop #60 2018-12-04T07:24:36.275Z,1543908276.275 [Default:CheckIn] Running Loop=60 2018-12-04T07:24:36.275Z,1543908276.275 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T07:24:36.275Z,1543908276.275 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T07:24:37.039Z,1543908277.039 [NAL9602](INFO): Powering up 2018-12-04T07:24:47.844Z,1543908287.844 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:25:19.464Z,1543908319.464 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T07:25:19.542Z,1543908319.542 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T07:25:19.542Z,1543908319.542 [NAL9602] Data Fault, FailCount= 5 2018-12-04T07:25:19.542Z,1543908319.542 [NAL9602](ERROR): Data Fault 2018-12-04T07:25:19.617Z,1543908319.617 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T07:25:19.618Z,1543908319.618 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T07:25:19.860Z,1543908319.860 [NAL9602](INFO): Powering down 2018-12-04T07:25:19.892Z,1543908319.892 [CBIT](INFO): Critical error at 20181204T072519 2018-12-04T07:25:56.305Z,1543908356.305 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:25:56.306Z,1543908356.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-04T07:25:56.306Z,1543908356.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:25:56.308Z,1543908356.308 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:25:56.308Z,1543908356.308 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-04T07:25:56.308Z,1543908356.308 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:25:56.355Z,1543908356.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:25:56.355Z,1543908356.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:25:56.719Z,1543908356.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:25:56.719Z,1543908356.719 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-04T07:25:56.719Z,1543908356.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:25:56.719Z,1543908356.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-04T07:25:57.110Z,1543908357.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:25:57.110Z,1543908357.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:25:57.111Z,1543908357.111 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:25:57.111Z,1543908357.111 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:25:57.111Z,1543908357.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:25:57.112Z,1543908357.112 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:27:19.929Z,1543908439.929 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T07:27:19.929Z,1543908439.929 [NAL9602] No Fault, FailCount= 5 2018-12-04T07:27:20.288Z,1543908440.288 [NAL9602](INFO): Powering up NAL9602 2018-12-04T07:27:31.088Z,1543908451.088 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:27:31.888Z,1543908451.888 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T07:27:31.888Z,1543908451.888 [NAL9602] Data Fault, FailCount= 1 2018-12-04T07:27:31.888Z,1543908451.888 [NAL9602](ERROR): Data Fault 2018-12-04T07:27:31.941Z,1543908451.941 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T07:27:32.288Z,1543908452.288 [NAL9602](INFO): Powering down 2018-12-04T07:27:33.165Z,1543908453.165 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T07:27:33.165Z,1543908453.165 [NAL9602] No Fault, FailCount= 1 2018-12-04T07:27:57.235Z,1543908477.235 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:27:57.235Z,1543908477.235 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-04T07:27:57.235Z,1543908477.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:27:57.237Z,1543908477.237 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:27:57.237Z,1543908477.237 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-04T07:27:57.237Z,1543908477.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:27:57.279Z,1543908477.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:27:57.280Z,1543908477.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:27:57.643Z,1543908477.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:27:57.643Z,1543908477.643 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-04T07:27:57.644Z,1543908477.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:27:57.644Z,1543908477.644 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-04T07:27:58.030Z,1543908478.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:27:58.030Z,1543908478.030 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:27:58.031Z,1543908478.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:27:58.043Z,1543908478.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:27:58.044Z,1543908478.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:27:58.044Z,1543908478.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:28:02.405Z,1543908482.405 [NAL9602](INFO): Powering up NAL9602 2018-12-04T07:28:13.608Z,1543908493.608 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:28:30.129Z,1543908510.129 [CBIT](IMPORTANT): Beginning ground fault scan 2018-12-04T07:28:40.939Z,1543908520.939 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.143794 CHAN A1 (24V): 0.000762 CHAN A2 (12V): -0.005550 CHAN A3 (5V): -0.002611 CHAN B0 (3.3V): -0.001737 CHAN B1 (3.15aV): -0.001573 CHAN B2 (3.15bV): -0.000975 CHAN B3 (GND): -0.000307 OPEN: -0.001345 Full Scale Calc: 4.765 mA, -1.589 mA 2018-12-04T07:29:37.578Z,1543908577.578 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T07:24:36.3Z 2018-12-04T07:29:37.578Z,1543908577.578 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T07:29:37.578Z,1543908577.578 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T07:29:42.634Z,1543908582.634 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0177.lzma 2018-12-04T07:29:43.435Z,1543908583.435 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0177.lzma.bak 2018-12-04T07:29:43.435Z,1543908583.435 [DataOverHttps](INFO): SBD MOMSN=8963414 2018-12-04T07:29:52.735Z,1543908592.735 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T07:29:52.819Z,1543908592.819 [DataOverHttps](INFO): Sending 529 bytes from file Logs/20181203T211451/Express0178.lzma 2018-12-04T07:29:53.593Z,1543908593.593 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0178.lzma.bak 2018-12-04T07:29:53.593Z,1543908593.593 [DataOverHttps](INFO): SBD MOMSN=8963417 2018-12-04T07:29:54.885Z,1543908594.885 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T07:29:54.885Z,1543908594.885 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T07:29:54.885Z,1543908594.885 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T07:29:58.232Z,1543908598.232 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:29:58.232Z,1543908598.232 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-04T07:29:58.232Z,1543908598.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:29:58.234Z,1543908598.234 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:29:58.234Z,1543908598.234 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-04T07:29:58.234Z,1543908598.234 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:29:58.248Z,1543908598.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:29:58.248Z,1543908598.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:29:58.386Z,1543908598.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:29:58.386Z,1543908598.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-04T07:29:58.386Z,1543908598.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:29:58.387Z,1543908598.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-04T07:29:58.691Z,1543908598.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:29:58.691Z,1543908598.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:29:58.692Z,1543908598.692 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:29:58.692Z,1543908598.692 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:29:58.692Z,1543908598.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:29:58.693Z,1543908598.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:30:23.068Z,1543908623.068 [NAL9602](INFO): Powering down 2018-12-04T07:31:58.873Z,1543908718.873 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:31:58.873Z,1543908718.873 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-04T07:31:58.873Z,1543908718.873 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:31:58.876Z,1543908718.876 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:31:58.876Z,1543908718.876 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-04T07:31:58.876Z,1543908718.876 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:31:58.889Z,1543908718.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:31:58.889Z,1543908718.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:31:59.294Z,1543908719.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:31:59.294Z,1543908719.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-04T07:31:59.295Z,1543908719.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:31:59.295Z,1543908719.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-04T07:31:59.678Z,1543908719.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:31:59.678Z,1543908719.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:31:59.679Z,1543908719.679 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:31:59.679Z,1543908719.679 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:31:59.679Z,1543908719.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:31:59.680Z,1543908719.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:33:59.710Z,1543908839.710 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:33:59.710Z,1543908839.710 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-04T07:33:59.710Z,1543908839.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:33:59.712Z,1543908839.712 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:33:59.712Z,1543908839.712 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-04T07:33:59.713Z,1543908839.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:33:59.726Z,1543908839.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:33:59.726Z,1543908839.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:34:00.122Z,1543908840.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:34:00.122Z,1543908840.122 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-04T07:34:00.123Z,1543908840.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:34:00.123Z,1543908840.123 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-04T07:34:00.506Z,1543908840.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:34:00.506Z,1543908840.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:34:00.507Z,1543908840.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:34:00.507Z,1543908840.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:34:00.508Z,1543908840.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:34:00.508Z,1543908840.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:34:55.370Z,1543908895.370 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T07:34:55.370Z,1543908895.370 [Default:CheckIn:C.Wait] Stopped 2018-12-04T07:34:55.370Z,1543908895.370 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T07:34:55.370Z,1543908895.370 [Default:CheckIn:D] Running Loop=1 2018-12-04T07:34:55.776Z,1543908895.776 [Default:CheckIn:D] Stopped 2018-12-04T07:34:55.776Z,1543908895.776 [Default:CheckIn:E] Running Loop=1 2018-12-04T07:34:56.171Z,1543908896.171 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 620.062565 min 2018-12-04T07:34:56.171Z,1543908896.171 [Default:CheckIn:E] Stopped 2018-12-04T07:34:56.171Z,1543908896.171 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T07:34:56.171Z,1543908896.171 [Default:CheckIn] Stopped 2018-12-04T07:34:56.171Z,1543908896.171 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T07:34:56.171Z,1543908896.171 [Default:CheckIn](INFO): Running loop #61 2018-12-04T07:34:56.171Z,1543908896.171 [Default:CheckIn] Running Loop=61 2018-12-04T07:34:56.172Z,1543908896.172 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T07:34:56.172Z,1543908896.172 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T07:34:56.935Z,1543908896.935 [NAL9602](INFO): Powering up 2018-12-04T07:35:08.136Z,1543908908.136 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:35:40.096Z,1543908940.096 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T07:35:40.170Z,1543908940.170 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T07:35:40.170Z,1543908940.170 [NAL9602] Data Fault, FailCount= 2 2018-12-04T07:35:40.170Z,1543908940.170 [NAL9602](ERROR): Data Fault 2018-12-04T07:35:40.229Z,1543908940.229 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T07:35:40.495Z,1543908940.495 [NAL9602](INFO): Powering down 2018-12-04T07:35:41.340Z,1543908941.340 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T07:35:41.340Z,1543908941.340 [NAL9602] No Fault, FailCount= 2 2018-12-04T07:36:00.878Z,1543908960.878 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:36:00.879Z,1543908960.879 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-04T07:36:00.879Z,1543908960.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:36:00.881Z,1543908960.881 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:36:00.881Z,1543908960.881 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-04T07:36:00.881Z,1543908960.881 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:36:00.895Z,1543908960.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:36:00.895Z,1543908960.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:36:01.294Z,1543908961.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:36:01.294Z,1543908961.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-04T07:36:01.295Z,1543908961.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:36:01.295Z,1543908961.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-04T07:36:01.673Z,1543908961.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:36:01.673Z,1543908961.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:36:01.673Z,1543908961.673 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:36:01.674Z,1543908961.674 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:36:01.674Z,1543908961.674 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:36:01.675Z,1543908961.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:36:10.852Z,1543908970.852 [NAL9602](INFO): Powering up NAL9602 2018-12-04T07:36:15.251Z,1543908975.251 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T07:36:15.251Z,1543908975.251 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T07:36:15.251Z,1543908975.251 [DropWeight](ERROR): Hardware Fault 2018-12-04T07:36:15.307Z,1543908975.307 [CBIT](INFO): Critical error at 20181204T073615 2018-12-04T07:36:15.310Z,1543908975.310 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T07:36:15.322Z,1543908975.322 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T07:36:15.694Z,1543908975.694 [CBIT](INFO): Critical error at 20181204T073615 2018-12-04T07:36:22.063Z,1543908982.063 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:38:01.888Z,1543909081.888 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:38:01.888Z,1543909081.888 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-04T07:38:01.888Z,1543909081.888 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:38:01.890Z,1543909081.890 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:38:01.890Z,1543909081.890 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-04T07:38:01.890Z,1543909081.890 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:38:01.904Z,1543909081.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:38:01.904Z,1543909081.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:38:02.311Z,1543909082.311 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:38:02.311Z,1543909082.311 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-04T07:38:02.311Z,1543909082.311 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:38:02.311Z,1543909082.311 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-04T07:38:02.694Z,1543909082.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:38:02.694Z,1543909082.694 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:38:02.695Z,1543909082.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:38:02.706Z,1543909082.706 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:38:02.707Z,1543909082.707 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:38:02.707Z,1543909082.707 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:39:56.555Z,1543909196.555 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T07:34:56.2Z 2018-12-04T07:39:56.555Z,1543909196.555 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T07:39:56.555Z,1543909196.555 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T07:40:01.591Z,1543909201.591 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0180.lzma 2018-12-04T07:40:02.372Z,1543909202.372 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0180.lzma.bak 2018-12-04T07:40:02.372Z,1543909202.372 [DataOverHttps](INFO): SBD MOMSN=8963451 2018-12-04T07:40:03.649Z,1543909203.649 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:40:03.649Z,1543909203.649 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-04T07:40:03.650Z,1543909203.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:40:03.652Z,1543909203.652 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:40:03.652Z,1543909203.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-04T07:40:03.652Z,1543909203.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:40:03.666Z,1543909203.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:40:03.666Z,1543909203.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:40:03.779Z,1543909203.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:40:03.779Z,1543909203.779 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-04T07:40:03.780Z,1543909203.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:40:03.780Z,1543909203.780 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-04T07:40:06.853Z,1543909206.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:40:06.854Z,1543909206.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:40:06.854Z,1543909206.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:40:06.855Z,1543909206.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:40:06.855Z,1543909206.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:40:06.856Z,1543909206.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:40:11.745Z,1543909211.745 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T07:40:11.829Z,1543909211.829 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0181.lzma 2018-12-04T07:40:12.589Z,1543909212.589 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0181.lzma.bak 2018-12-04T07:40:12.589Z,1543909212.589 [DataOverHttps](INFO): SBD MOMSN=8963455 2018-12-04T07:40:13.932Z,1543909213.932 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T07:40:13.932Z,1543909213.932 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T07:40:13.932Z,1543909213.932 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T07:40:41.991Z,1543909241.991 [NAL9602](INFO): Powering down 2018-12-04T07:42:07.062Z,1543909327.062 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:42:07.062Z,1543909327.062 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-04T07:42:07.063Z,1543909327.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:42:07.065Z,1543909327.065 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:42:07.065Z,1543909327.065 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-04T07:42:07.065Z,1543909327.065 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:42:07.079Z,1543909327.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:42:07.079Z,1543909327.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:42:07.482Z,1543909327.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:42:07.482Z,1543909327.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-04T07:42:07.483Z,1543909327.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:42:07.483Z,1543909327.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-04T07:42:07.862Z,1543909327.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:42:07.863Z,1543909327.863 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:42:07.863Z,1543909327.863 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:42:07.863Z,1543909327.863 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:42:07.864Z,1543909327.864 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:42:07.864Z,1543909327.864 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:44:07.981Z,1543909447.981 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:44:07.981Z,1543909447.981 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-04T07:44:07.981Z,1543909447.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:44:07.983Z,1543909447.983 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:44:07.983Z,1543909447.983 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-04T07:44:07.983Z,1543909447.983 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:44:07.997Z,1543909447.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:44:07.997Z,1543909447.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:44:08.407Z,1543909448.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:44:08.407Z,1543909448.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-04T07:44:08.407Z,1543909448.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:44:08.407Z,1543909448.407 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-04T07:44:08.790Z,1543909448.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:44:08.790Z,1543909448.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:44:08.791Z,1543909448.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:44:08.791Z,1543909448.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:44:08.791Z,1543909448.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:44:08.792Z,1543909448.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:45:14.300Z,1543909514.300 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T07:45:14.300Z,1543909514.300 [Default:CheckIn:C.Wait] Stopped 2018-12-04T07:45:14.300Z,1543909514.300 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T07:45:14.300Z,1543909514.300 [Default:CheckIn:D] Running Loop=1 2018-12-04T07:45:14.701Z,1543909514.701 [Default:CheckIn:D] Stopped 2018-12-04T07:45:14.701Z,1543909514.701 [Default:CheckIn:E] Running Loop=1 2018-12-04T07:45:15.098Z,1543909515.098 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 630.377995 min 2018-12-04T07:45:15.099Z,1543909515.099 [Default:CheckIn:E] Stopped 2018-12-04T07:45:15.099Z,1543909515.099 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T07:45:15.099Z,1543909515.099 [Default:CheckIn] Stopped 2018-12-04T07:45:15.099Z,1543909515.099 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T07:45:15.099Z,1543909515.099 [Default:CheckIn](INFO): Running loop #62 2018-12-04T07:45:15.099Z,1543909515.099 [Default:CheckIn] Running Loop=62 2018-12-04T07:45:15.099Z,1543909515.099 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T07:45:15.100Z,1543909515.100 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T07:45:15.865Z,1543909515.865 [NAL9602](INFO): Powering up 2018-12-04T07:45:26.668Z,1543909526.668 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:45:27.472Z,1543909527.472 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T07:45:27.472Z,1543909527.472 [NAL9602] Data Fault, FailCount= 3 2018-12-04T07:45:27.472Z,1543909527.472 [NAL9602](ERROR): Data Fault 2018-12-04T07:45:27.527Z,1543909527.527 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T07:45:27.867Z,1543909527.867 [NAL9602](INFO): Powering down 2018-12-04T07:45:28.713Z,1543909528.713 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T07:45:28.713Z,1543909528.713 [NAL9602] No Fault, FailCount= 3 2018-12-04T07:45:58.223Z,1543909558.223 [NAL9602](INFO): Powering up NAL9602 2018-12-04T07:46:09.499Z,1543909569.499 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:46:09.499Z,1543909569.499 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-04T07:46:09.499Z,1543909569.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:46:09.501Z,1543909569.501 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:46:09.501Z,1543909569.501 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-04T07:46:09.501Z,1543909569.501 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:46:09.514Z,1543909569.514 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:46:09.515Z,1543909569.515 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:46:09.655Z,1543909569.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:46:09.655Z,1543909569.655 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-04T07:46:09.656Z,1543909569.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:46:09.656Z,1543909569.656 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-04T07:46:09.932Z,1543909569.932 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:46:09.963Z,1543909569.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:46:09.964Z,1543909569.964 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:46:09.964Z,1543909569.964 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:46:09.965Z,1543909569.965 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:46:09.965Z,1543909569.965 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:46:09.965Z,1543909569.965 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:48:10.018Z,1543909690.018 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:48:10.018Z,1543909690.018 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-04T07:48:10.018Z,1543909690.018 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:48:10.020Z,1543909690.020 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:48:10.020Z,1543909690.020 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-04T07:48:10.021Z,1543909690.021 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:48:10.034Z,1543909690.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:48:10.035Z,1543909690.035 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:48:10.438Z,1543909690.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:48:10.438Z,1543909690.438 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-04T07:48:10.439Z,1543909690.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:48:10.439Z,1543909690.439 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-04T07:48:10.826Z,1543909690.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:48:10.827Z,1543909690.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:48:10.827Z,1543909690.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:48:10.827Z,1543909690.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:48:10.828Z,1543909690.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:48:10.828Z,1543909690.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:50:11.094Z,1543909811.094 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:50:11.095Z,1543909811.095 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-04T07:50:11.095Z,1543909811.095 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:50:11.097Z,1543909811.097 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:50:11.097Z,1543909811.097 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-04T07:50:11.097Z,1543909811.097 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:50:11.111Z,1543909811.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:50:11.111Z,1543909811.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:50:11.502Z,1543909811.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:50:11.502Z,1543909811.502 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-04T07:50:11.503Z,1543909811.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:50:11.503Z,1543909811.503 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-04T07:50:11.885Z,1543909811.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:50:11.885Z,1543909811.885 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:50:11.885Z,1543909811.885 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:50:11.886Z,1543909811.886 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:50:11.886Z,1543909811.886 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:50:11.887Z,1543909811.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:50:15.970Z,1543909815.970 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T07:45:15.1Z 2018-12-04T07:50:15.970Z,1543909815.970 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T07:50:15.971Z,1543909815.971 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T07:50:16.901Z,1543909816.901 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0183.lzma 2018-12-04T07:50:17.374Z,1543909817.374 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0183.lzma.bak 2018-12-04T07:50:17.374Z,1543909817.374 [DataOverHttps](INFO): SBD MOMSN=8963486 2018-12-04T07:50:26.725Z,1543909826.725 [DataOverHttps](INFO): Sending 316 bytes from file Logs/20181203T211451/Express0184.lzma 2018-12-04T07:50:27.525Z,1543909827.525 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0184.lzma.bak 2018-12-04T07:50:27.525Z,1543909827.525 [DataOverHttps](INFO): SBD MOMSN=8963488 2018-12-04T07:50:28.848Z,1543909828.848 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T07:50:28.848Z,1543909828.848 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T07:50:28.848Z,1543909828.848 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T07:51:13.899Z,1543909873.899 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T07:51:15.546Z,1543909875.546 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T07:51:15.546Z,1543909875.546 [DropWeight] No Fault, FailCount= 1 2018-12-04T07:51:44.671Z,1543909904.671 [NAL9602](INFO): Powering down 2018-12-04T07:52:11.896Z,1543909931.896 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:52:11.896Z,1543909931.896 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-04T07:52:11.896Z,1543909931.896 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:52:11.898Z,1543909931.898 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:52:11.898Z,1543909931.898 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-04T07:52:11.899Z,1543909931.899 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:52:11.912Z,1543909931.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:52:11.912Z,1543909931.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:52:12.319Z,1543909932.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:52:12.319Z,1543909932.319 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-04T07:52:12.320Z,1543909932.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:52:12.320Z,1543909932.320 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-04T07:52:12.701Z,1543909932.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:52:12.701Z,1543909932.701 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:52:12.702Z,1543909932.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:52:12.702Z,1543909932.702 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:52:12.702Z,1543909932.702 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:52:12.703Z,1543909932.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:54:12.748Z,1543910052.748 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:54:12.748Z,1543910052.748 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-04T07:54:12.748Z,1543910052.748 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:54:12.750Z,1543910052.750 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:54:12.750Z,1543910052.750 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-04T07:54:12.750Z,1543910052.750 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:54:12.763Z,1543910052.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:54:12.764Z,1543910052.764 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:54:13.164Z,1543910053.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:54:13.164Z,1543910053.164 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-04T07:54:13.165Z,1543910053.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:54:13.165Z,1543910053.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-04T07:54:13.544Z,1543910053.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:54:13.544Z,1543910053.544 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:54:13.545Z,1543910053.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:54:13.545Z,1543910053.545 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:54:13.545Z,1543910053.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:54:13.546Z,1543910053.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:55:29.206Z,1543910129.206 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T07:55:29.206Z,1543910129.206 [Default:CheckIn:C.Wait] Stopped 2018-12-04T07:55:29.206Z,1543910129.206 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T07:55:29.206Z,1543910129.206 [Default:CheckIn:D] Running Loop=1 2018-12-04T07:55:29.605Z,1543910129.605 [Default:CheckIn:D] Stopped 2018-12-04T07:55:29.605Z,1543910129.605 [Default:CheckIn:E] Running Loop=1 2018-12-04T07:55:30.004Z,1543910130.004 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 640.626367 min 2018-12-04T07:55:30.004Z,1543910130.004 [Default:CheckIn:E] Stopped 2018-12-04T07:55:30.004Z,1543910130.004 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T07:55:30.004Z,1543910130.004 [Default:CheckIn] Stopped 2018-12-04T07:55:30.004Z,1543910130.004 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T07:55:30.005Z,1543910130.005 [Default:CheckIn](INFO): Running loop #63 2018-12-04T07:55:30.005Z,1543910130.005 [Default:CheckIn] Running Loop=63 2018-12-04T07:55:30.005Z,1543910130.005 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T07:55:30.005Z,1543910130.005 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T07:55:30.765Z,1543910130.765 [NAL9602](INFO): Powering up 2018-12-04T07:55:51.532Z,1543910151.532 [NAL9602](ERROR): NAL9602 initialization error. 2018-12-04T07:55:51.532Z,1543910151.532 [NAL9602] Communications Fault, FailCount= 4 2018-12-04T07:55:51.532Z,1543910151.532 [NAL9602](ERROR): Communications Fault 2018-12-04T07:55:51.609Z,1543910151.609 [CBIT](ERROR): Communications Fault in component: NAL9602 2018-12-04T07:55:51.932Z,1543910151.932 [NAL9602](INFO): Powering down 2018-12-04T07:55:52.781Z,1543910152.781 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T07:55:52.781Z,1543910152.781 [NAL9602] No Fault, FailCount= 4 2018-12-04T07:56:13.590Z,1543910173.590 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:56:13.591Z,1543910173.591 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-04T07:56:13.591Z,1543910173.591 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:56:13.593Z,1543910173.593 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:56:13.593Z,1543910173.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-04T07:56:13.593Z,1543910173.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:56:13.637Z,1543910173.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:56:13.637Z,1543910173.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:56:13.994Z,1543910173.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:56:13.994Z,1543910173.994 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-04T07:56:13.995Z,1543910173.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:56:13.995Z,1543910173.995 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-04T07:56:14.380Z,1543910174.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:56:14.381Z,1543910174.381 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:56:14.381Z,1543910174.381 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:56:14.381Z,1543910174.381 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:56:14.382Z,1543910174.382 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:56:14.382Z,1543910174.382 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:56:24.227Z,1543910184.227 [NAL9602](INFO): Powering up NAL9602 2018-12-04T07:56:35.076Z,1543910195.076 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:56:35.876Z,1543910195.876 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T07:56:35.876Z,1543910195.876 [NAL9602] Data Fault, FailCount= 5 2018-12-04T07:56:35.876Z,1543910195.876 [NAL9602](ERROR): Data Fault 2018-12-04T07:56:35.953Z,1543910195.953 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T07:56:35.953Z,1543910195.953 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T07:56:36.276Z,1543910196.276 [NAL9602](INFO): Powering down 2018-12-04T07:56:36.328Z,1543910196.328 [CBIT](INFO): Critical error at 20181204T075635 2018-12-04T07:58:14.462Z,1543910294.462 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:58:14.462Z,1543910294.462 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-04T07:58:14.463Z,1543910294.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T07:58:14.465Z,1543910294.465 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T07:58:14.465Z,1543910294.465 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-04T07:58:14.465Z,1543910294.465 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T07:58:14.534Z,1543910294.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T07:58:14.535Z,1543910294.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T07:58:14.891Z,1543910294.891 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T07:58:14.891Z,1543910294.891 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-04T07:58:14.891Z,1543910294.891 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T07:58:14.891Z,1543910294.891 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-04T07:58:15.262Z,1543910295.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T07:58:15.263Z,1543910295.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:58:15.263Z,1543910295.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:58:15.264Z,1543910295.264 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T07:58:15.264Z,1543910295.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T07:58:15.264Z,1543910295.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T07:58:36.076Z,1543910316.076 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T07:58:36.076Z,1543910316.076 [NAL9602] No Fault, FailCount= 5 2018-12-04T07:58:36.440Z,1543910316.440 [NAL9602](INFO): Powering up NAL9602 2018-12-04T07:58:47.588Z,1543910327.588 [NAL9602](INFO): NAL9602 initialized 2018-12-04T07:59:56.322Z,1543910396.322 [BuoyancyServo](ERROR): getPosition uart error serial timeout 2018-12-04T07:59:56.322Z,1543910396.322 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-12-04T07:59:56.323Z,1543910396.323 [BuoyancyServo] Communications Fault, FailCount= 1 2018-12-04T07:59:56.323Z,1543910396.323 [BuoyancyServo](ERROR): Communications Fault 2018-12-04T07:59:56.328Z,1543910396.328 [CBIT](ERROR): Communications Fault in component: BuoyancyServo 2018-12-04T07:59:58.014Z,1543910398.014 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo. 2018-12-04T07:59:58.014Z,1543910398.014 [BuoyancyServo](INFO): Powering down 2018-12-04T07:59:58.802Z,1543910398.802 [CBIT](INFO): Clearing failed state for component BuoyancyServo 2018-12-04T07:59:58.802Z,1543910398.802 [BuoyancyServo] No Fault, FailCount= 1 2018-12-04T07:59:59.215Z,1543910399.215 [BuoyancyServo](DEBUG): Initializing EZServoServo. 2018-12-04T07:59:59.221Z,1543910399.221 [BuoyancyServo](DEBUG): Initializing BuoyancyServo. 2018-12-04T08:00:15.584Z,1543910415.584 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:00:15.584Z,1543910415.584 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-04T08:00:15.584Z,1543910415.584 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:00:15.586Z,1543910415.586 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:00:15.586Z,1543910415.586 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-04T08:00:15.586Z,1543910415.586 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:00:15.637Z,1543910415.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:00:15.638Z,1543910415.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:00:16.026Z,1543910416.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:00:16.027Z,1543910416.027 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-04T08:00:16.027Z,1543910416.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:00:16.027Z,1543910416.027 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-04T08:00:16.394Z,1543910416.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:00:16.409Z,1543910416.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:00:16.409Z,1543910416.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:00:16.410Z,1543910416.410 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:00:16.410Z,1543910416.410 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:00:16.411Z,1543910416.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:00:30.863Z,1543910430.863 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T07:55:30.0Z 2018-12-04T08:00:30.863Z,1543910430.863 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T08:00:30.863Z,1543910430.863 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T08:00:36.639Z,1543910436.639 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0186.lzma 2018-12-04T08:00:37.437Z,1543910437.437 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0186.lzma.bak 2018-12-04T08:00:37.437Z,1543910437.437 [DataOverHttps](INFO): SBD MOMSN=8963521 2018-12-04T08:00:46.901Z,1543910446.901 [DataOverHttps](INFO): Sending 372 bytes from file Logs/20181203T211451/Express0187.lzma 2018-12-04T08:00:47.701Z,1543910447.701 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0187.lzma.bak 2018-12-04T08:00:47.702Z,1543910447.702 [DataOverHttps](INFO): SBD MOMSN=8963524 2018-12-04T08:00:49.037Z,1543910449.037 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T08:00:49.037Z,1543910449.037 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T08:00:49.038Z,1543910449.038 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T08:02:16.723Z,1543910536.723 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:02:16.723Z,1543910536.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-04T08:02:16.723Z,1543910536.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:02:16.725Z,1543910536.725 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:02:16.725Z,1543910536.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-04T08:02:16.725Z,1543910536.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:02:16.750Z,1543910536.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:02:16.751Z,1543910536.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:02:17.143Z,1543910537.143 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:02:17.143Z,1543910537.143 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-04T08:02:17.143Z,1543910537.143 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:02:17.143Z,1543910537.143 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-04T08:02:17.534Z,1543910537.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:02:17.535Z,1543910537.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:02:17.535Z,1543910537.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:02:17.535Z,1543910537.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:02:17.536Z,1543910537.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:02:17.536Z,1543910537.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:03:50.868Z,1543910630.868 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T08:04:17.698Z,1543910657.698 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:04:17.698Z,1543910657.698 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-04T08:04:17.698Z,1543910657.698 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:04:17.701Z,1543910657.701 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:04:17.701Z,1543910657.701 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-04T08:04:17.701Z,1543910657.701 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:04:17.714Z,1543910657.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:04:17.714Z,1543910657.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:04:18.117Z,1543910658.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:04:18.118Z,1543910658.118 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-04T08:04:18.118Z,1543910658.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:04:18.118Z,1543910658.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-04T08:04:18.487Z,1543910658.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:04:18.487Z,1543910658.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:04:18.487Z,1543910658.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:04:18.488Z,1543910658.488 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:04:18.488Z,1543910658.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:04:18.489Z,1543910658.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:04:24.035Z,1543910664.035 [NAL9602](INFO): Powering down 2018-12-04T08:05:49.280Z,1543910749.280 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T08:05:49.281Z,1543910749.281 [Default:CheckIn:C.Wait] Stopped 2018-12-04T08:05:49.281Z,1543910749.281 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T08:05:49.281Z,1543910749.281 [Default:CheckIn:D] Running Loop=1 2018-12-04T08:05:49.681Z,1543910749.681 [Default:CheckIn:D] Stopped 2018-12-04T08:05:49.681Z,1543910749.681 [Default:CheckIn:E] Running Loop=1 2018-12-04T08:05:50.087Z,1543910750.087 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 650.961003 min 2018-12-04T08:05:50.087Z,1543910750.087 [Default:CheckIn:E] Stopped 2018-12-04T08:05:50.087Z,1543910750.087 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T08:05:50.087Z,1543910750.087 [Default:CheckIn] Stopped 2018-12-04T08:05:50.087Z,1543910750.087 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T08:05:50.087Z,1543910750.087 [Default:CheckIn](INFO): Running loop #64 2018-12-04T08:05:50.088Z,1543910750.088 [Default:CheckIn] Running Loop=64 2018-12-04T08:05:50.088Z,1543910750.088 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T08:05:50.088Z,1543910750.088 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T08:05:50.849Z,1543910750.849 [NAL9602](INFO): Powering up 2018-12-04T08:06:01.652Z,1543910761.652 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:06:18.590Z,1543910778.590 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:06:18.590Z,1543910778.590 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-04T08:06:18.590Z,1543910778.590 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:06:18.592Z,1543910778.592 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:06:18.593Z,1543910778.593 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-04T08:06:18.593Z,1543910778.593 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:06:18.606Z,1543910778.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:06:18.606Z,1543910778.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:06:19.006Z,1543910779.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:06:19.006Z,1543910779.006 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-04T08:06:19.006Z,1543910779.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:06:19.006Z,1543910779.006 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-04T08:06:19.389Z,1543910779.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:06:19.389Z,1543910779.389 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:06:19.390Z,1543910779.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:06:19.390Z,1543910779.390 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:06:19.391Z,1543910779.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:06:19.391Z,1543910779.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:08:19.422Z,1543910899.422 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:08:19.422Z,1543910899.422 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-04T08:08:19.422Z,1543910899.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:08:19.424Z,1543910899.424 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:08:19.424Z,1543910899.424 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-04T08:08:19.424Z,1543910899.424 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:08:19.438Z,1543910899.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:08:19.462Z,1543910899.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:08:19.834Z,1543910899.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:08:19.834Z,1543910899.834 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-04T08:08:19.834Z,1543910899.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:08:19.834Z,1543910899.834 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-04T08:08:20.218Z,1543910900.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:08:20.218Z,1543910900.218 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:08:20.219Z,1543910900.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:08:20.219Z,1543910900.219 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:08:20.219Z,1543910900.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:08:20.220Z,1543910900.220 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:10:20.406Z,1543911020.406 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:10:20.406Z,1543911020.406 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-04T08:10:20.406Z,1543911020.406 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:10:20.408Z,1543911020.408 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:10:20.409Z,1543911020.409 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-04T08:10:20.409Z,1543911020.409 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:10:20.422Z,1543911020.422 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:10:20.423Z,1543911020.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:10:20.811Z,1543911020.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:10:20.811Z,1543911020.811 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-04T08:10:20.812Z,1543911020.812 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:10:20.812Z,1543911020.812 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-04T08:10:21.210Z,1543911021.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:10:21.211Z,1543911021.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:10:21.211Z,1543911021.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:10:21.211Z,1543911021.211 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:10:21.212Z,1543911021.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:10:21.212Z,1543911021.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:10:51.509Z,1543911051.509 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T08:05:50.1Z 2018-12-04T08:10:51.509Z,1543911051.509 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T08:10:51.510Z,1543911051.510 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T08:10:56.480Z,1543911056.480 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0189.lzma 2018-12-04T08:10:57.257Z,1543911057.257 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0189.lzma.bak 2018-12-04T08:10:57.257Z,1543911057.257 [DataOverHttps](INFO): SBD MOMSN=8963555 2018-12-04T08:11:06.701Z,1543911066.701 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T08:11:06.796Z,1543911066.796 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0190.lzma 2018-12-04T08:11:07.561Z,1543911067.561 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0190.lzma.bak 2018-12-04T08:11:07.561Z,1543911067.561 [DataOverHttps](INFO): SBD MOMSN=8963557 2018-12-04T08:11:08.849Z,1543911068.849 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T08:11:08.849Z,1543911068.849 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T08:11:08.850Z,1543911068.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T08:11:36.867Z,1543911096.867 [NAL9602](INFO): Powering down 2018-12-04T08:12:22.949Z,1543911142.949 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:12:22.949Z,1543911142.949 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-04T08:12:22.949Z,1543911142.949 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:12:22.952Z,1543911142.952 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:12:22.952Z,1543911142.952 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-04T08:12:22.952Z,1543911142.952 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:12:22.965Z,1543911142.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:12:22.965Z,1543911142.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:12:23.097Z,1543911143.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:12:23.097Z,1543911143.097 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-04T08:12:23.098Z,1543911143.098 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:12:23.098Z,1543911143.098 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-04T08:12:23.430Z,1543911143.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:12:23.430Z,1543911143.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:12:23.431Z,1543911143.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:12:23.431Z,1543911143.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:12:23.432Z,1543911143.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:12:23.432Z,1543911143.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:14:23.763Z,1543911263.763 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:14:23.763Z,1543911263.763 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-04T08:14:23.763Z,1543911263.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:14:23.765Z,1543911263.765 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:14:23.765Z,1543911263.765 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-04T08:14:23.765Z,1543911263.765 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:14:23.779Z,1543911263.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:14:23.779Z,1543911263.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:14:24.182Z,1543911264.182 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:14:24.182Z,1543911264.182 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-04T08:14:24.183Z,1543911264.183 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:14:24.183Z,1543911264.183 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-04T08:14:24.565Z,1543911264.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:14:24.565Z,1543911264.565 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:14:24.566Z,1543911264.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:14:24.566Z,1543911264.566 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:14:24.567Z,1543911264.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:14:24.567Z,1543911264.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:16:09.119Z,1543911369.119 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T08:16:09.120Z,1543911369.120 [Default:CheckIn:C.Wait] Stopped 2018-12-04T08:16:09.120Z,1543911369.120 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T08:16:09.120Z,1543911369.120 [Default:CheckIn:D] Running Loop=1 2018-12-04T08:16:09.525Z,1543911369.525 [Default:CheckIn:D] Stopped 2018-12-04T08:16:09.525Z,1543911369.525 [Default:CheckIn:E] Running Loop=1 2018-12-04T08:16:09.919Z,1543911369.919 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 661.291732 min 2018-12-04T08:16:09.919Z,1543911369.919 [Default:CheckIn:E] Stopped 2018-12-04T08:16:09.919Z,1543911369.919 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T08:16:09.919Z,1543911369.919 [Default:CheckIn] Stopped 2018-12-04T08:16:09.920Z,1543911369.920 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T08:16:09.920Z,1543911369.920 [Default:CheckIn](INFO): Running loop #65 2018-12-04T08:16:09.920Z,1543911369.920 [Default:CheckIn] Running Loop=65 2018-12-04T08:16:09.920Z,1543911369.920 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T08:16:09.920Z,1543911369.920 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T08:16:10.692Z,1543911370.692 [NAL9602](INFO): Powering up 2018-12-04T08:16:21.892Z,1543911381.892 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:16:22.692Z,1543911382.692 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T08:16:22.692Z,1543911382.692 [NAL9602] Data Fault, FailCount= 1 2018-12-04T08:16:22.692Z,1543911382.692 [NAL9602](ERROR): Data Fault 2018-12-04T08:16:22.773Z,1543911382.773 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T08:16:23.092Z,1543911383.092 [NAL9602](INFO): Powering down 2018-12-04T08:16:23.950Z,1543911383.950 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T08:16:23.950Z,1543911383.950 [NAL9602] No Fault, FailCount= 1 2018-12-04T08:16:24.727Z,1543911384.727 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:16:24.727Z,1543911384.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-04T08:16:24.728Z,1543911384.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:16:24.730Z,1543911384.730 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:16:24.730Z,1543911384.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-04T08:16:24.730Z,1543911384.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:16:24.792Z,1543911384.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:16:24.792Z,1543911384.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:16:25.137Z,1543911385.137 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:16:25.137Z,1543911385.137 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-04T08:16:25.146Z,1543911385.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:16:25.146Z,1543911385.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-04T08:16:25.525Z,1543911385.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:16:25.526Z,1543911385.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:16:25.526Z,1543911385.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:16:25.527Z,1543911385.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:16:25.527Z,1543911385.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:16:25.527Z,1543911385.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:16:53.460Z,1543911413.460 [NAL9602](INFO): Powering up NAL9602 2018-12-04T08:17:05.003Z,1543911425.003 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:18:25.919Z,1543911505.919 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:18:25.919Z,1543911505.919 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-04T08:18:25.919Z,1543911505.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:18:25.921Z,1543911505.921 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:18:25.921Z,1543911505.921 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-04T08:18:25.922Z,1543911505.922 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:18:25.936Z,1543911505.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:18:25.937Z,1543911505.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:18:26.345Z,1543911506.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:18:26.345Z,1543911506.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-04T08:18:26.345Z,1543911506.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:18:26.346Z,1543911506.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-04T08:18:26.730Z,1543911506.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:18:26.730Z,1543911506.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:18:26.731Z,1543911506.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:18:26.731Z,1543911506.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:18:26.732Z,1543911506.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:18:26.732Z,1543911506.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:20:26.806Z,1543911626.806 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:20:26.806Z,1543911626.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-04T08:20:26.807Z,1543911626.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:20:26.809Z,1543911626.809 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:20:26.809Z,1543911626.809 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-04T08:20:26.809Z,1543911626.809 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:20:26.822Z,1543911626.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:20:26.822Z,1543911626.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:20:27.229Z,1543911627.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:20:27.229Z,1543911627.229 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-04T08:20:27.229Z,1543911627.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:20:27.229Z,1543911627.229 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-04T08:20:27.606Z,1543911627.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:20:27.607Z,1543911627.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:20:27.607Z,1543911627.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:20:27.607Z,1543911627.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:20:27.608Z,1543911627.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:20:27.608Z,1543911627.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:21:11.107Z,1543911671.107 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T08:16:09.9Z 2018-12-04T08:21:11.107Z,1543911671.107 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T08:21:11.107Z,1543911671.107 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T08:21:16.372Z,1543911676.372 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0192.lzma 2018-12-04T08:21:16.735Z,1543911676.735 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T08:21:16.735Z,1543911676.735 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T08:21:16.735Z,1543911676.735 [DropWeight](ERROR): Hardware Fault 2018-12-04T08:21:16.809Z,1543911676.809 [CBIT](INFO): Critical error at 20181204T082116 2018-12-04T08:21:16.811Z,1543911676.811 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T08:21:16.812Z,1543911676.812 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T08:21:17.133Z,1543911677.133 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0192.lzma.bak 2018-12-04T08:21:17.133Z,1543911677.133 [DataOverHttps](INFO): SBD MOMSN=8963584 2018-12-04T08:21:17.243Z,1543911677.243 [CBIT](INFO): Critical error at 20181204T082116 2018-12-04T08:21:26.576Z,1543911686.576 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0193.lzma 2018-12-04T08:21:27.391Z,1543911687.391 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0193.lzma.bak 2018-12-04T08:21:27.391Z,1543911687.391 [DataOverHttps](INFO): SBD MOMSN=8963586 2018-12-04T08:21:28.665Z,1543911688.665 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T08:21:28.665Z,1543911688.665 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T08:21:28.665Z,1543911688.665 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T08:21:58.593Z,1543911718.593 [BPC1](ERROR): BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file). 2018-12-04T08:22:07.860Z,1543911727.860 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T08:22:27.882Z,1543911747.882 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:22:27.882Z,1543911747.882 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-04T08:22:27.882Z,1543911747.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:22:27.884Z,1543911747.884 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:22:27.884Z,1543911747.884 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-04T08:22:27.885Z,1543911747.885 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:22:27.898Z,1543911747.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:22:27.898Z,1543911747.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:22:28.298Z,1543911748.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:22:28.298Z,1543911748.298 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-04T08:22:28.299Z,1543911748.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:22:28.299Z,1543911748.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-04T08:22:28.681Z,1543911748.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:22:28.681Z,1543911748.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:22:28.682Z,1543911748.682 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:22:28.682Z,1543911748.682 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:22:28.683Z,1543911748.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:22:28.683Z,1543911748.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:22:38.659Z,1543911758.659 [NAL9602](INFO): Powering down 2018-12-04T08:22:38.699Z,1543911758.699 [BPC1](ERROR): BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file). 2018-12-04T08:24:28.715Z,1543911868.715 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:24:28.715Z,1543911868.715 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-04T08:24:28.715Z,1543911868.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:24:28.717Z,1543911868.717 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:24:28.717Z,1543911868.717 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-04T08:24:28.717Z,1543911868.717 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:24:28.731Z,1543911868.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:24:28.731Z,1543911868.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:24:29.173Z,1543911869.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:24:29.173Z,1543911869.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-04T08:24:29.173Z,1543911869.173 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:24:29.173Z,1543911869.173 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-04T08:24:29.507Z,1543911869.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:24:29.507Z,1543911869.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:24:29.508Z,1543911869.508 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:24:29.508Z,1543911869.508 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:24:29.509Z,1543911869.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:24:29.509Z,1543911869.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:25:46.936Z,1543911946.936 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T08:26:28.916Z,1543911988.916 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T08:26:28.916Z,1543911988.916 [Default:CheckIn:C.Wait] Stopped 2018-12-04T08:26:28.916Z,1543911988.916 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T08:26:28.916Z,1543911988.916 [Default:CheckIn:D] Running Loop=1 2018-12-04T08:26:29.321Z,1543911989.321 [Default:CheckIn:D] Stopped 2018-12-04T08:26:29.321Z,1543911989.321 [Default:CheckIn:E] Running Loop=1 2018-12-04T08:26:29.718Z,1543911989.718 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:26:29.718Z,1543911989.718 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-04T08:26:29.718Z,1543911989.718 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:26:29.720Z,1543911989.720 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:26:29.720Z,1543911989.720 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-04T08:26:29.721Z,1543911989.721 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:26:29.724Z,1543911989.724 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 671.621615 min 2018-12-04T08:26:29.724Z,1543911989.724 [Default:CheckIn:E] Stopped 2018-12-04T08:26:29.724Z,1543911989.724 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T08:26:29.724Z,1543911989.724 [Default:CheckIn] Stopped 2018-12-04T08:26:29.724Z,1543911989.724 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T08:26:29.724Z,1543911989.724 [Default:CheckIn](INFO): Running loop #66 2018-12-04T08:26:29.725Z,1543911989.725 [Default:CheckIn] Running Loop=66 2018-12-04T08:26:29.725Z,1543911989.725 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T08:26:29.725Z,1543911989.725 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T08:26:29.736Z,1543911989.736 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:26:29.736Z,1543911989.736 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:26:30.127Z,1543911990.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:26:30.127Z,1543911990.127 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-04T08:26:30.128Z,1543911990.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:26:30.128Z,1543911990.128 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-04T08:26:30.491Z,1543911990.491 [NAL9602](INFO): Powering up 2018-12-04T08:26:30.514Z,1543911990.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:26:30.514Z,1543911990.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:26:30.515Z,1543911990.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:26:30.530Z,1543911990.530 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:26:30.531Z,1543911990.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:26:30.531Z,1543911990.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:26:41.691Z,1543912001.691 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:27:13.647Z,1543912033.647 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T08:27:13.730Z,1543912033.730 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T08:27:13.730Z,1543912033.730 [NAL9602] Data Fault, FailCount= 2 2018-12-04T08:27:13.730Z,1543912033.730 [NAL9602](ERROR): Data Fault 2018-12-04T08:27:13.789Z,1543912033.789 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T08:27:14.051Z,1543912034.051 [NAL9602](INFO): Powering down 2018-12-04T08:27:14.895Z,1543912034.895 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T08:27:14.895Z,1543912034.895 [NAL9602] No Fault, FailCount= 2 2018-12-04T08:27:44.415Z,1543912064.415 [NAL9602](INFO): Powering up NAL9602 2018-12-04T08:27:55.616Z,1543912075.616 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:27:56.427Z,1543912076.427 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T08:27:56.428Z,1543912076.428 [NAL9602] Data Fault, FailCount= 3 2018-12-04T08:27:56.428Z,1543912076.428 [NAL9602](ERROR): Data Fault 2018-12-04T08:27:56.469Z,1543912076.469 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T08:27:59.687Z,1543912079.687 [NAL9602](INFO): Powering down 2018-12-04T08:28:00.209Z,1543912080.209 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T08:28:00.210Z,1543912080.210 [NAL9602] No Fault, FailCount= 3 2018-12-04T08:28:29.763Z,1543912109.763 [NAL9602](INFO): Powering up NAL9602 2018-12-04T08:28:30.594Z,1543912110.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:28:30.594Z,1543912110.594 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-04T08:28:30.594Z,1543912110.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:28:30.596Z,1543912110.596 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:28:30.596Z,1543912110.596 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-04T08:28:30.596Z,1543912110.596 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:28:30.610Z,1543912110.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:28:30.610Z,1543912110.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:28:30.998Z,1543912110.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:28:30.998Z,1543912110.998 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-04T08:28:31.011Z,1543912111.011 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:28:31.011Z,1543912111.011 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-04T08:28:31.382Z,1543912111.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:28:31.382Z,1543912111.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:28:31.383Z,1543912111.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:28:31.383Z,1543912111.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:28:31.384Z,1543912111.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:28:31.384Z,1543912111.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:28:40.583Z,1543912120.583 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:30:31.710Z,1543912231.710 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:30:31.711Z,1543912231.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-04T08:30:31.711Z,1543912231.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:30:31.713Z,1543912231.713 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:30:31.713Z,1543912231.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-04T08:30:31.713Z,1543912231.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:30:31.751Z,1543912231.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:30:31.751Z,1543912231.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:30:32.118Z,1543912232.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:30:32.118Z,1543912232.118 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-04T08:30:32.119Z,1543912232.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:30:32.119Z,1543912232.119 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-04T08:30:32.502Z,1543912232.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:30:32.503Z,1543912232.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:30:32.503Z,1543912232.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:30:32.503Z,1543912232.503 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:30:32.504Z,1543912232.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:30:32.504Z,1543912232.504 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:31:30.991Z,1543912290.991 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T08:26:29.7Z 2018-12-04T08:31:30.991Z,1543912290.991 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T08:31:30.991Z,1543912290.991 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T08:31:35.948Z,1543912295.948 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20181203T211451/Courier0195.lzma 2018-12-04T08:31:36.721Z,1543912296.721 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0195.lzma.bak 2018-12-04T08:31:36.721Z,1543912296.721 [DataOverHttps](INFO): SBD MOMSN=8963617 2018-12-04T08:31:45.938Z,1543912305.938 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T08:31:46.017Z,1543912306.017 [DataOverHttps](INFO): Sending 338 bytes from file Logs/20181203T211451/Express0196.lzma 2018-12-04T08:31:46.818Z,1543912306.818 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0196.lzma.bak 2018-12-04T08:31:46.818Z,1543912306.818 [DataOverHttps](INFO): SBD MOMSN=8963621 2018-12-04T08:31:48.163Z,1543912308.163 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T08:31:48.163Z,1543912308.163 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T08:31:48.163Z,1543912308.163 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T08:32:16.171Z,1543912336.171 [NAL9602](INFO): Powering down 2018-12-04T08:32:32.551Z,1543912352.551 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:32:32.551Z,1543912352.551 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-04T08:32:32.551Z,1543912352.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:32:32.553Z,1543912352.553 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:32:32.553Z,1543912352.553 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-04T08:32:32.553Z,1543912352.553 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:32:32.596Z,1543912352.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:32:32.597Z,1543912352.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:32:32.995Z,1543912352.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:32:32.995Z,1543912352.995 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-04T08:32:32.996Z,1543912352.996 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:32:32.996Z,1543912352.996 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-04T08:32:33.354Z,1543912353.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:32:33.354Z,1543912353.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:32:33.355Z,1543912353.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:32:33.355Z,1543912353.355 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:32:33.355Z,1543912353.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:32:33.356Z,1543912353.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:34:33.540Z,1543912473.540 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:34:33.541Z,1543912473.541 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-04T08:34:33.541Z,1543912473.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:34:33.543Z,1543912473.543 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:34:33.543Z,1543912473.543 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-04T08:34:33.543Z,1543912473.543 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:34:33.556Z,1543912473.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:34:33.556Z,1543912473.556 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:34:33.955Z,1543912473.955 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:34:33.955Z,1543912473.955 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-04T08:34:33.956Z,1543912473.956 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:34:33.956Z,1543912473.956 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-04T08:34:34.344Z,1543912474.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:34:34.345Z,1543912474.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:34:34.345Z,1543912474.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:34:34.346Z,1543912474.346 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:34:34.347Z,1543912474.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:34:34.347Z,1543912474.347 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:36:17.063Z,1543912577.063 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T08:36:17.063Z,1543912577.063 [DropWeight] No Fault, FailCount= 1 2018-12-04T08:36:34.353Z,1543912594.353 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:36:34.353Z,1543912594.353 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-04T08:36:34.353Z,1543912594.353 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:36:34.356Z,1543912594.356 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:36:34.356Z,1543912594.356 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-04T08:36:34.356Z,1543912594.356 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:36:34.369Z,1543912594.369 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:36:34.370Z,1543912594.370 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:36:34.774Z,1543912594.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:36:34.774Z,1543912594.774 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-04T08:36:34.774Z,1543912594.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:36:34.774Z,1543912594.774 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-04T08:36:35.146Z,1543912595.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:36:35.147Z,1543912595.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:36:35.147Z,1543912595.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:36:35.148Z,1543912595.148 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:36:35.148Z,1543912595.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:36:35.148Z,1543912595.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:36:48.354Z,1543912608.354 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T08:36:48.355Z,1543912608.355 [Default:CheckIn:C.Wait] Stopped 2018-12-04T08:36:48.355Z,1543912608.355 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T08:36:48.355Z,1543912608.355 [Default:CheckIn:D] Running Loop=1 2018-12-04T08:36:48.754Z,1543912608.754 [Default:CheckIn:D] Stopped 2018-12-04T08:36:48.754Z,1543912608.754 [Default:CheckIn:E] Running Loop=1 2018-12-04T08:36:49.162Z,1543912609.162 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 681.945508 min 2018-12-04T08:36:49.162Z,1543912609.162 [Default:CheckIn:E] Stopped 2018-12-04T08:36:49.162Z,1543912609.162 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T08:36:49.162Z,1543912609.162 [Default:CheckIn] Stopped 2018-12-04T08:36:49.163Z,1543912609.163 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T08:36:49.163Z,1543912609.163 [Default:CheckIn](INFO): Running loop #67 2018-12-04T08:36:49.163Z,1543912609.163 [Default:CheckIn] Running Loop=67 2018-12-04T08:36:49.163Z,1543912609.163 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T08:36:49.163Z,1543912609.163 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T08:36:49.923Z,1543912609.923 [NAL9602](INFO): Powering up 2018-12-04T08:37:01.128Z,1543912621.128 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:38:35.366Z,1543912715.366 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:38:35.366Z,1543912715.366 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-04T08:38:35.366Z,1543912715.366 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:38:35.368Z,1543912715.368 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:38:35.368Z,1543912715.368 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-04T08:38:35.369Z,1543912715.369 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:38:35.382Z,1543912715.382 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:38:35.383Z,1543912715.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:38:35.786Z,1543912715.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:38:35.786Z,1543912715.786 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-04T08:38:35.787Z,1543912715.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:38:35.787Z,1543912715.787 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-04T08:38:36.156Z,1543912716.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:38:36.156Z,1543912716.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:38:36.157Z,1543912716.157 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:38:36.157Z,1543912716.157 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:38:36.158Z,1543912716.158 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:38:36.158Z,1543912716.158 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:40:36.510Z,1543912836.510 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:40:36.510Z,1543912836.510 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-04T08:40:36.510Z,1543912836.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:40:36.512Z,1543912836.512 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:40:36.512Z,1543912836.512 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-04T08:40:36.513Z,1543912836.513 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:40:36.526Z,1543912836.526 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:40:36.561Z,1543912836.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:40:36.946Z,1543912836.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:40:36.946Z,1543912836.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-04T08:40:36.947Z,1543912836.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:40:36.947Z,1543912836.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-04T08:40:40.119Z,1543912840.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:40:40.119Z,1543912840.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:40:40.120Z,1543912840.120 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:40:40.120Z,1543912840.120 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:40:40.120Z,1543912840.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:40:40.121Z,1543912840.121 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:41:50.460Z,1543912910.460 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T08:36:49.2Z 2018-12-04T08:41:50.460Z,1543912910.460 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T08:41:50.461Z,1543912910.461 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T08:41:55.587Z,1543912915.587 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0198.lzma 2018-12-04T08:41:56.385Z,1543912916.385 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0198.lzma.bak 2018-12-04T08:41:56.386Z,1543912916.386 [DataOverHttps](INFO): SBD MOMSN=8963650 2018-12-04T08:42:06.503Z,1543912926.503 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T08:42:06.587Z,1543912926.587 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0199.lzma 2018-12-04T08:42:07.373Z,1543912927.373 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0199.lzma.bak 2018-12-04T08:42:07.373Z,1543912927.373 [DataOverHttps](INFO): SBD MOMSN=8963652 2018-12-04T08:42:08.672Z,1543912928.672 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T08:42:08.672Z,1543912928.672 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T08:42:08.672Z,1543912928.672 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T08:42:36.840Z,1543912956.840 [NAL9602](INFO): Powering down 2018-12-04T08:42:40.459Z,1543912960.459 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:42:40.459Z,1543912960.459 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-04T08:42:40.459Z,1543912960.459 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:42:40.461Z,1543912960.461 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:42:40.461Z,1543912960.461 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-04T08:42:40.461Z,1543912960.461 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:42:40.503Z,1543912960.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:42:40.503Z,1543912960.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:42:40.902Z,1543912960.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:42:40.902Z,1543912960.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-04T08:42:40.903Z,1543912960.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:42:40.903Z,1543912960.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-04T08:42:41.256Z,1543912961.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:42:41.256Z,1543912961.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:42:41.257Z,1543912961.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:42:41.257Z,1543912961.257 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:42:41.258Z,1543912961.258 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:42:41.258Z,1543912961.258 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:44:41.562Z,1543913081.562 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:44:41.562Z,1543913081.562 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-04T08:44:41.562Z,1543913081.562 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:44:41.564Z,1543913081.564 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:44:41.564Z,1543913081.564 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-04T08:44:41.565Z,1543913081.565 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:44:41.578Z,1543913081.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:44:41.579Z,1543913081.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:44:41.974Z,1543913081.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:44:41.974Z,1543913081.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-04T08:44:41.974Z,1543913081.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:44:41.974Z,1543913081.974 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-04T08:44:42.353Z,1543913082.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:44:42.353Z,1543913082.353 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:44:42.354Z,1543913082.354 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:44:42.354Z,1543913082.354 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:44:42.355Z,1543913082.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:44:42.355Z,1543913082.355 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:46:42.516Z,1543913202.516 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:46:42.516Z,1543913202.516 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-04T08:46:42.516Z,1543913202.516 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:46:42.519Z,1543913202.519 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:46:42.519Z,1543913202.519 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-04T08:46:42.519Z,1543913202.519 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:46:42.554Z,1543913202.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:46:42.555Z,1543913202.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:46:42.946Z,1543913202.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:46:42.946Z,1543913202.946 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-04T08:46:42.947Z,1543913202.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:46:42.947Z,1543913202.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-04T08:46:43.323Z,1543913203.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:46:43.323Z,1543913203.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:46:43.323Z,1543913203.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:46:43.324Z,1543913203.324 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:46:43.324Z,1543913203.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:46:43.324Z,1543913203.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:47:08.950Z,1543913228.950 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T08:47:08.950Z,1543913228.950 [Default:CheckIn:C.Wait] Stopped 2018-12-04T08:47:08.950Z,1543913228.950 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T08:47:08.950Z,1543913228.950 [Default:CheckIn:D] Running Loop=1 2018-12-04T08:47:09.343Z,1543913229.343 [Default:CheckIn:D] Stopped 2018-12-04T08:47:09.343Z,1543913229.343 [Default:CheckIn:E] Running Loop=1 2018-12-04T08:47:09.751Z,1543913229.751 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 692.288672 min 2018-12-04T08:47:09.751Z,1543913229.751 [Default:CheckIn:E] Stopped 2018-12-04T08:47:09.751Z,1543913229.751 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T08:47:09.751Z,1543913229.751 [Default:CheckIn] Stopped 2018-12-04T08:47:09.752Z,1543913229.752 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T08:47:09.752Z,1543913229.752 [Default:CheckIn](INFO): Running loop #68 2018-12-04T08:47:09.752Z,1543913229.752 [Default:CheckIn] Running Loop=68 2018-12-04T08:47:09.752Z,1543913229.752 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T08:47:09.752Z,1543913229.752 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T08:47:10.520Z,1543913230.520 [NAL9602](INFO): Powering up 2018-12-04T08:47:21.720Z,1543913241.720 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:47:22.518Z,1543913242.518 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T08:47:22.518Z,1543913242.518 [NAL9602] Data Fault, FailCount= 4 2018-12-04T08:47:22.518Z,1543913242.518 [NAL9602](ERROR): Data Fault 2018-12-04T08:47:22.584Z,1543913242.584 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T08:47:22.920Z,1543913242.920 [NAL9602](INFO): Powering down 2018-12-04T08:47:23.770Z,1543913243.770 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T08:47:23.770Z,1543913243.770 [NAL9602] No Fault, FailCount= 4 2018-12-04T08:47:53.292Z,1543913273.292 [NAL9602](INFO): Powering up NAL9602 2018-12-04T08:48:04.852Z,1543913284.852 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:48:43.702Z,1543913323.702 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:48:43.702Z,1543913323.702 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-04T08:48:43.702Z,1543913323.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:48:43.704Z,1543913323.704 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:48:43.705Z,1543913323.705 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-04T08:48:43.705Z,1543913323.705 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:48:43.718Z,1543913323.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:48:43.718Z,1543913323.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:48:44.108Z,1543913324.108 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:48:44.108Z,1543913324.108 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-04T08:48:44.109Z,1543913324.109 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:48:44.109Z,1543913324.109 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-04T08:48:44.514Z,1543913324.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:48:44.515Z,1543913324.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:48:44.515Z,1543913324.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:48:44.515Z,1543913324.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:48:44.516Z,1543913324.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:48:44.516Z,1543913324.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:50:44.546Z,1543913444.546 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:50:44.547Z,1543913444.546 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-04T08:50:44.547Z,1543913444.547 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:50:44.549Z,1543913444.549 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:50:44.549Z,1543913444.549 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-04T08:50:44.549Z,1543913444.549 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:50:44.587Z,1543913444.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:50:44.587Z,1543913444.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:50:44.958Z,1543913444.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:50:44.958Z,1543913444.958 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-04T08:50:44.959Z,1543913444.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:50:44.959Z,1543913444.959 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-04T08:50:45.342Z,1543913445.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:50:45.343Z,1543913445.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:50:45.343Z,1543913445.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:50:45.344Z,1543913445.344 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:50:45.344Z,1543913445.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:50:45.344Z,1543913445.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:52:10.984Z,1543913530.984 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T08:47:09.8Z 2018-12-04T08:52:10.984Z,1543913530.984 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T08:52:10.984Z,1543913530.984 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T08:52:15.988Z,1543913535.988 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0201.lzma 2018-12-04T08:52:16.783Z,1543913536.783 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0201.lzma.bak 2018-12-04T08:52:16.783Z,1543913536.783 [DataOverHttps](INFO): SBD MOMSN=8963680 2018-12-04T08:52:26.231Z,1543913546.231 [DataOverHttps](INFO): Sending 303 bytes from file Logs/20181203T211451/Express0202.lzma 2018-12-04T08:52:27.029Z,1543913547.029 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0202.lzma.bak 2018-12-04T08:52:27.029Z,1543913547.029 [DataOverHttps](INFO): SBD MOMSN=8963682 2018-12-04T08:52:28.381Z,1543913548.381 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T08:52:28.381Z,1543913548.381 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T08:52:28.381Z,1543913548.381 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T08:52:45.707Z,1543913565.707 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:52:45.707Z,1543913565.707 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-04T08:52:45.707Z,1543913565.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:52:45.709Z,1543913565.709 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:52:45.709Z,1543913565.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-04T08:52:45.710Z,1543913565.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:52:45.768Z,1543913565.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:52:45.768Z,1543913565.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:52:46.146Z,1543913566.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:52:46.147Z,1543913566.147 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-04T08:52:46.147Z,1543913566.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:52:46.147Z,1543913566.147 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-04T08:52:46.510Z,1543913566.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:52:46.511Z,1543913566.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:52:46.511Z,1543913566.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:52:46.511Z,1543913566.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:52:46.512Z,1543913566.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:52:46.512Z,1543913566.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:53:07.728Z,1543913587.728 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T08:53:38.521Z,1543913618.521 [NAL9602](INFO): Powering down 2018-12-04T08:54:46.887Z,1543913686.887 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:54:46.887Z,1543913686.887 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-04T08:54:46.887Z,1543913686.887 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:54:46.889Z,1543913686.889 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:54:46.889Z,1543913686.889 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-04T08:54:46.889Z,1543913686.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:54:46.942Z,1543913686.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:54:46.942Z,1543913686.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:54:47.325Z,1543913687.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:54:47.325Z,1543913687.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-04T08:54:47.325Z,1543913687.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:54:47.325Z,1543913687.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-04T08:54:47.682Z,1543913687.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:54:47.683Z,1543913687.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:54:47.683Z,1543913687.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:54:47.683Z,1543913687.683 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:54:47.684Z,1543913687.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:54:47.684Z,1543913687.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:56:48.034Z,1543913808.034 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:56:48.034Z,1543913808.034 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-04T08:56:48.034Z,1543913808.034 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:56:48.036Z,1543913808.036 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:56:48.036Z,1543913808.036 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-04T08:56:48.036Z,1543913808.036 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:56:48.050Z,1543913808.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:56:48.050Z,1543913808.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:56:48.454Z,1543913808.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:56:48.454Z,1543913808.454 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-04T08:56:48.454Z,1543913808.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:56:48.454Z,1543913808.454 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-04T08:56:48.841Z,1543913808.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:56:48.841Z,1543913808.841 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:56:48.841Z,1543913808.841 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:56:48.842Z,1543913808.842 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:56:48.843Z,1543913808.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:56:48.843Z,1543913808.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:57:28.573Z,1543913848.573 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T08:57:28.574Z,1543913848.574 [Default:CheckIn:C.Wait] Stopped 2018-12-04T08:57:28.574Z,1543913848.574 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T08:57:28.574Z,1543913848.574 [Default:CheckIn:D] Running Loop=1 2018-12-04T08:57:28.976Z,1543913848.976 [Default:CheckIn:D] Stopped 2018-12-04T08:57:28.976Z,1543913848.976 [Default:CheckIn:E] Running Loop=1 2018-12-04T08:57:29.359Z,1543913849.359 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 702.615625 min 2018-12-04T08:57:29.359Z,1543913849.359 [Default:CheckIn:E] Stopped 2018-12-04T08:57:29.359Z,1543913849.359 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T08:57:29.359Z,1543913849.359 [Default:CheckIn] Stopped 2018-12-04T08:57:29.360Z,1543913849.360 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T08:57:29.360Z,1543913849.360 [Default:CheckIn](INFO): Running loop #69 2018-12-04T08:57:29.360Z,1543913849.360 [Default:CheckIn] Running Loop=69 2018-12-04T08:57:29.360Z,1543913849.360 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T08:57:29.360Z,1543913849.360 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T08:57:30.133Z,1543913850.133 [NAL9602](INFO): Powering up 2018-12-04T08:57:41.336Z,1543913861.336 [NAL9602](INFO): NAL9602 initialized 2018-12-04T08:58:49.147Z,1543913929.147 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:58:49.147Z,1543913929.147 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-04T08:58:49.147Z,1543913929.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T08:58:49.149Z,1543913929.149 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T08:58:49.150Z,1543913929.150 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-04T08:58:49.150Z,1543913929.150 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T08:58:49.163Z,1543913929.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T08:58:49.163Z,1543913929.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T08:58:49.570Z,1543913929.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T08:58:49.570Z,1543913929.570 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-04T08:58:49.571Z,1543913929.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T08:58:49.571Z,1543913929.571 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-04T08:58:49.958Z,1543913929.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T08:58:49.958Z,1543913929.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:58:49.959Z,1543913929.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T08:58:49.959Z,1543913929.959 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T08:58:49.959Z,1543913929.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T08:58:49.960Z,1543913929.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:00:50.014Z,1543914050.014 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:00:50.015Z,1543914050.015 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-04T09:00:50.015Z,1543914050.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:00:50.019Z,1543914050.019 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:00:50.020Z,1543914050.020 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-04T09:00:50.020Z,1543914050.020 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:00:50.041Z,1543914050.041 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:00:50.042Z,1543914050.042 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:00:50.430Z,1543914050.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:00:50.430Z,1543914050.430 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-04T09:00:50.431Z,1543914050.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:00:50.431Z,1543914050.431 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-04T09:00:50.834Z,1543914050.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:00:50.834Z,1543914050.834 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:00:50.835Z,1543914050.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:00:50.835Z,1543914050.835 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:00:50.836Z,1543914050.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:00:50.836Z,1543914050.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:02:30.748Z,1543914150.748 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T08:57:29.4Z 2018-12-04T09:02:30.748Z,1543914150.748 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T09:02:30.748Z,1543914150.748 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T09:02:35.660Z,1543914155.660 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0204.lzma 2018-12-04T09:02:36.497Z,1543914156.497 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0204.lzma.bak 2018-12-04T09:02:36.497Z,1543914156.497 [DataOverHttps](INFO): SBD MOMSN=8963711 2018-12-04T09:02:45.728Z,1543914165.728 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T09:02:45.813Z,1543914165.813 [DataOverHttps](INFO): Sending 290 bytes from file Logs/20181203T211451/Express0205.lzma 2018-12-04T09:02:46.601Z,1543914166.601 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0205.lzma.bak 2018-12-04T09:02:46.601Z,1543914166.601 [DataOverHttps](INFO): SBD MOMSN=8963713 2018-12-04T09:02:47.902Z,1543914167.902 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T09:02:47.902Z,1543914167.902 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T09:02:47.902Z,1543914167.902 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T09:02:51.054Z,1543914171.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:02:51.054Z,1543914171.054 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-04T09:02:51.054Z,1543914171.054 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:02:51.056Z,1543914171.056 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:02:51.056Z,1543914171.056 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-04T09:02:51.056Z,1543914171.056 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:02:51.069Z,1543914171.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:02:51.070Z,1543914171.070 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:02:51.197Z,1543914171.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:02:51.197Z,1543914171.197 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-04T09:02:51.198Z,1543914171.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:02:51.198Z,1543914171.198 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-04T09:02:51.506Z,1543914171.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:02:51.506Z,1543914171.506 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:02:51.507Z,1543914171.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:02:51.507Z,1543914171.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:02:51.507Z,1543914171.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:02:51.508Z,1543914171.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:03:15.884Z,1543914195.884 [NAL9602](INFO): Powering down 2018-12-04T09:04:51.694Z,1543914291.694 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:04:51.694Z,1543914291.694 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-04T09:04:51.694Z,1543914291.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:04:51.696Z,1543914291.696 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:04:51.696Z,1543914291.696 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-04T09:04:51.697Z,1543914291.697 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:04:51.710Z,1543914291.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:04:51.710Z,1543914291.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:04:52.109Z,1543914292.109 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:04:52.109Z,1543914292.109 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-04T09:04:52.110Z,1543914292.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:04:52.110Z,1543914292.110 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-04T09:04:52.497Z,1543914292.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:04:52.498Z,1543914292.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:04:52.498Z,1543914292.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:04:52.499Z,1543914292.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:04:52.499Z,1543914292.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:04:52.499Z,1543914292.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:06:18.403Z,1543914378.403 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T09:06:18.403Z,1543914378.403 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T09:06:18.403Z,1543914378.403 [DropWeight](ERROR): Hardware Fault 2018-12-04T09:06:18.454Z,1543914378.454 [CBIT](INFO): Critical error at 20181204T090618 2018-12-04T09:06:18.457Z,1543914378.457 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T09:06:18.457Z,1543914378.457 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T09:06:18.846Z,1543914378.846 [CBIT](INFO): Critical error at 20181204T090618 2018-12-04T09:06:52.567Z,1543914412.567 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:06:52.567Z,1543914412.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-04T09:06:52.567Z,1543914412.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:06:52.569Z,1543914412.569 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:06:52.569Z,1543914412.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-04T09:06:52.569Z,1543914412.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:06:52.635Z,1543914412.635 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:06:52.635Z,1543914412.635 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:06:52.994Z,1543914412.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:06:52.995Z,1543914412.995 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-04T09:06:52.995Z,1543914412.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:06:52.995Z,1543914412.995 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-04T09:06:53.374Z,1543914413.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:06:53.406Z,1543914413.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:06:53.407Z,1543914413.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:06:53.407Z,1543914413.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:06:53.408Z,1543914413.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:06:53.408Z,1543914413.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:07:48.242Z,1543914468.242 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T09:07:48.242Z,1543914468.242 [Default:CheckIn:C.Wait] Stopped 2018-12-04T09:07:48.242Z,1543914468.242 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T09:07:48.242Z,1543914468.242 [Default:CheckIn:D] Running Loop=1 2018-12-04T09:07:48.641Z,1543914468.641 [Default:CheckIn:D] Stopped 2018-12-04T09:07:48.641Z,1543914468.641 [Default:CheckIn:E] Running Loop=1 2018-12-04T09:07:49.040Z,1543914469.040 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 712.943620 min 2018-12-04T09:07:49.040Z,1543914469.040 [Default:CheckIn:E] Stopped 2018-12-04T09:07:49.040Z,1543914469.040 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T09:07:49.040Z,1543914469.040 [Default:CheckIn] Stopped 2018-12-04T09:07:49.040Z,1543914469.040 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T09:07:49.040Z,1543914469.040 [Default:CheckIn](INFO): Running loop #70 2018-12-04T09:07:49.040Z,1543914469.040 [Default:CheckIn] Running Loop=70 2018-12-04T09:07:49.041Z,1543914469.041 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T09:07:49.041Z,1543914469.041 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T09:07:49.811Z,1543914469.811 [NAL9602](INFO): Powering up 2018-12-04T09:08:00.612Z,1543914480.612 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:08:01.416Z,1543914481.416 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T09:08:01.416Z,1543914481.416 [NAL9602] Data Fault, FailCount= 5 2018-12-04T09:08:01.416Z,1543914481.416 [NAL9602](ERROR): Data Fault 2018-12-04T09:08:01.494Z,1543914481.494 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T09:08:01.494Z,1543914481.494 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T09:08:01.811Z,1543914481.811 [NAL9602](INFO): Powering down 2018-12-04T09:08:01.858Z,1543914481.858 [CBIT](INFO): Critical error at 20181204T090801 2018-12-04T09:08:53.746Z,1543914533.746 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:08:53.746Z,1543914533.746 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-04T09:08:53.746Z,1543914533.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:08:53.748Z,1543914533.748 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:08:53.748Z,1543914533.748 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-04T09:08:53.749Z,1543914533.749 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:08:53.762Z,1543914533.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:08:53.762Z,1543914533.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:08:54.155Z,1543914534.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:08:54.155Z,1543914534.155 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-04T09:08:54.156Z,1543914534.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:08:54.156Z,1543914534.156 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-04T09:08:54.541Z,1543914534.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:08:54.542Z,1543914534.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:08:54.542Z,1543914534.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:08:54.543Z,1543914534.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:08:54.543Z,1543914534.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:08:54.543Z,1543914534.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:10:01.436Z,1543914601.436 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T09:10:01.436Z,1543914601.436 [NAL9602] No Fault, FailCount= 5 2018-12-04T09:10:01.795Z,1543914601.795 [NAL9602](INFO): Powering up NAL9602 2018-12-04T09:10:12.595Z,1543914612.595 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:10:54.612Z,1543914654.612 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:10:54.612Z,1543914654.612 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-04T09:10:54.613Z,1543914654.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:10:54.615Z,1543914654.615 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:10:54.615Z,1543914654.615 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-04T09:10:54.615Z,1543914654.615 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:10:54.629Z,1543914654.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:10:54.629Z,1543914654.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:10:55.038Z,1543914655.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:10:55.038Z,1543914655.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-04T09:10:55.039Z,1543914655.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:10:55.039Z,1543914655.039 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-04T09:10:55.419Z,1543914655.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:10:55.419Z,1543914655.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:10:55.420Z,1543914655.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:10:55.420Z,1543914655.420 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:10:55.421Z,1543914655.421 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:10:55.421Z,1543914655.421 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:12:50.171Z,1543914770.171 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T09:07:49.0Z 2018-12-04T09:12:50.171Z,1543914770.171 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T09:12:50.171Z,1543914770.171 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T09:12:55.273Z,1543914775.273 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181203T211451/Courier0207.lzma 2018-12-04T09:12:55.694Z,1543914775.694 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:12:55.694Z,1543914775.694 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-04T09:12:55.694Z,1543914775.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:12:55.696Z,1543914775.696 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:12:55.696Z,1543914775.696 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-04T09:12:55.697Z,1543914775.697 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:12:55.757Z,1543914775.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:12:55.757Z,1543914775.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:12:56.053Z,1543914776.053 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0207.lzma.bak 2018-12-04T09:12:56.053Z,1543914776.053 [DataOverHttps](INFO): SBD MOMSN=8963741 2018-12-04T09:12:56.135Z,1543914776.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:12:56.135Z,1543914776.135 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-04T09:12:56.135Z,1543914776.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:12:56.135Z,1543914776.135 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-04T09:12:57.387Z,1543914777.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:12:57.388Z,1543914777.388 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:12:57.388Z,1543914777.388 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:12:57.389Z,1543914777.389 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:12:57.389Z,1543914777.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:12:57.389Z,1543914777.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:13:05.497Z,1543914785.497 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0208.lzma 2018-12-04T09:13:06.272Z,1543914786.272 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0208.lzma.bak 2018-12-04T09:13:06.272Z,1543914786.272 [DataOverHttps](INFO): SBD MOMSN=8963746 2018-12-04T09:13:07.582Z,1543914787.582 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T09:13:07.582Z,1543914787.582 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T09:13:07.582Z,1543914787.582 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T09:14:57.473Z,1543914897.473 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:14:57.473Z,1543914897.473 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-04T09:14:57.473Z,1543914897.473 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:14:57.476Z,1543914897.476 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:14:57.476Z,1543914897.476 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-04T09:14:57.476Z,1543914897.476 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:14:57.489Z,1543914897.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:14:57.489Z,1543914897.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:14:57.899Z,1543914897.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:14:57.899Z,1543914897.899 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-04T09:14:57.900Z,1543914897.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:14:57.900Z,1543914897.900 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-04T09:14:58.278Z,1543914898.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:14:58.278Z,1543914898.278 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:14:58.279Z,1543914898.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:14:58.279Z,1543914898.279 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:14:58.279Z,1543914898.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:14:58.280Z,1543914898.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:15:16.235Z,1543914916.235 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T09:15:47.015Z,1543914947.015 [NAL9602](INFO): Powering down 2018-12-04T09:16:58.306Z,1543915018.306 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:16:58.306Z,1543915018.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-04T09:16:58.306Z,1543915018.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:16:58.308Z,1543915018.308 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:16:58.308Z,1543915018.308 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-04T09:16:58.308Z,1543915018.308 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:16:58.322Z,1543915018.322 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:16:58.322Z,1543915018.322 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:16:58.726Z,1543915018.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:16:58.726Z,1543915018.726 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-04T09:16:58.727Z,1543915018.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:16:58.727Z,1543915018.727 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-04T09:16:59.109Z,1543915019.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:16:59.109Z,1543915019.109 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:16:59.110Z,1543915019.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:16:59.110Z,1543915019.110 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:16:59.110Z,1543915019.110 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:16:59.111Z,1543915019.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:18:08.029Z,1543915088.029 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T09:18:08.030Z,1543915088.030 [Default:CheckIn:C.Wait] Stopped 2018-12-04T09:18:08.030Z,1543915088.030 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T09:18:08.030Z,1543915088.030 [Default:CheckIn:D] Running Loop=1 2018-12-04T09:18:08.423Z,1543915088.423 [Default:CheckIn:D] Stopped 2018-12-04T09:18:08.423Z,1543915088.423 [Default:CheckIn:E] Running Loop=1 2018-12-04T09:18:08.848Z,1543915088.848 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 723.273372 min 2018-12-04T09:18:08.848Z,1543915088.848 [Default:CheckIn:E] Stopped 2018-12-04T09:18:08.848Z,1543915088.848 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T09:18:08.848Z,1543915088.848 [Default:CheckIn] Stopped 2018-12-04T09:18:08.848Z,1543915088.848 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T09:18:08.849Z,1543915088.849 [Default:CheckIn](INFO): Running loop #71 2018-12-04T09:18:08.849Z,1543915088.849 [Default:CheckIn] Running Loop=71 2018-12-04T09:18:08.849Z,1543915088.849 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T09:18:08.849Z,1543915088.849 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T09:18:09.601Z,1543915089.601 [NAL9602](INFO): Powering up 2018-12-04T09:18:20.403Z,1543915100.403 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:18:52.371Z,1543915132.371 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T09:18:52.454Z,1543915132.454 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T09:18:52.454Z,1543915132.454 [NAL9602] Data Fault, FailCount= 1 2018-12-04T09:18:52.454Z,1543915132.454 [NAL9602](ERROR): Data Fault 2018-12-04T09:18:52.513Z,1543915132.513 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T09:18:52.771Z,1543915132.771 [NAL9602](INFO): Powering down 2018-12-04T09:18:53.621Z,1543915133.621 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T09:18:53.621Z,1543915133.621 [NAL9602] No Fault, FailCount= 1 2018-12-04T09:18:59.188Z,1543915139.188 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:18:59.188Z,1543915139.188 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-04T09:18:59.188Z,1543915139.188 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:18:59.190Z,1543915139.190 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:18:59.190Z,1543915139.190 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-04T09:18:59.190Z,1543915139.190 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:18:59.216Z,1543915139.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:18:59.216Z,1543915139.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:18:59.630Z,1543915139.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:18:59.630Z,1543915139.630 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-04T09:18:59.630Z,1543915139.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:18:59.630Z,1543915139.630 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-04T09:18:59.999Z,1543915139.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:18:59.999Z,1543915139.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:18:59.999Z,1543915139.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:18:59.000Z,1543915140.000 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:19:00.000Z,1543915140.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:19:00.001Z,1543915140.001 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:19:23.115Z,1543915163.115 [NAL9602](INFO): Powering up NAL9602 2018-12-04T09:19:34.322Z,1543915174.322 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:21:00.206Z,1543915260.206 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:21:00.206Z,1543915260.206 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-04T09:21:00.206Z,1543915260.206 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:21:00.208Z,1543915260.208 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:21:00.208Z,1543915260.208 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-04T09:21:00.209Z,1543915260.209 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:21:00.222Z,1543915260.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:21:00.255Z,1543915260.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:21:00.607Z,1543915260.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:21:00.608Z,1543915260.608 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-04T09:21:00.608Z,1543915260.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:21:00.608Z,1543915260.608 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-04T09:21:01.004Z,1543915261.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:21:01.005Z,1543915261.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:21:01.005Z,1543915261.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:21:01.006Z,1543915261.006 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:21:01.006Z,1543915261.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:21:01.007Z,1543915261.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:21:18.642Z,1543915278.642 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T09:21:18.642Z,1543915278.642 [DropWeight] No Fault, FailCount= 1 2018-12-04T09:23:01.370Z,1543915381.370 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:23:01.370Z,1543915381.370 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-04T09:23:01.370Z,1543915381.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:23:01.372Z,1543915381.372 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:23:01.372Z,1543915381.372 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-04T09:23:01.373Z,1543915381.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:23:01.390Z,1543915381.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:23:01.390Z,1543915381.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:23:01.781Z,1543915381.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:23:01.782Z,1543915381.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-04T09:23:01.782Z,1543915381.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:23:01.782Z,1543915381.782 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-04T09:23:02.180Z,1543915382.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:23:02.180Z,1543915382.180 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:23:02.181Z,1543915382.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:23:02.181Z,1543915382.181 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:23:02.181Z,1543915382.181 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:23:02.182Z,1543915382.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:23:09.678Z,1543915389.678 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T09:18:08.8Z 2018-12-04T09:23:09.679Z,1543915389.679 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T09:23:09.679Z,1543915389.679 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T09:23:14.690Z,1543915394.690 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0210.lzma 2018-12-04T09:23:15.489Z,1543915395.489 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0210.lzma.bak 2018-12-04T09:23:15.489Z,1543915395.489 [DataOverHttps](INFO): SBD MOMSN=8963780 2018-12-04T09:23:25.069Z,1543915405.069 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T09:23:25.139Z,1543915405.139 [DataOverHttps](INFO): Sending 333 bytes from file Logs/20181203T211451/Express0211.lzma 2018-12-04T09:23:25.929Z,1543915405.929 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0211.lzma.bak 2018-12-04T09:23:25.929Z,1543915405.929 [DataOverHttps](INFO): SBD MOMSN=8963782 2018-12-04T09:23:27.404Z,1543915407.404 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T09:23:27.405Z,1543915407.405 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T09:23:27.405Z,1543915407.405 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T09:23:55.459Z,1543915435.459 [NAL9602](INFO): Powering down 2018-12-04T09:25:02.263Z,1543915502.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:25:02.263Z,1543915502.263 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-04T09:25:02.263Z,1543915502.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:25:02.265Z,1543915502.265 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:25:02.265Z,1543915502.265 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-04T09:25:02.265Z,1543915502.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:25:02.279Z,1543915502.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:25:02.279Z,1543915502.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:25:02.682Z,1543915502.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:25:02.682Z,1543915502.682 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-04T09:25:02.682Z,1543915502.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:25:02.683Z,1543915502.683 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-04T09:25:03.066Z,1543915503.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:25:03.066Z,1543915503.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:25:03.067Z,1543915503.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:25:03.067Z,1543915503.067 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:25:03.068Z,1543915503.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:25:03.068Z,1543915503.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:27:03.176Z,1543915623.176 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:27:03.176Z,1543915623.176 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-04T09:27:03.176Z,1543915623.176 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:27:03.178Z,1543915623.178 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:27:03.178Z,1543915623.178 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-04T09:27:03.178Z,1543915623.178 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:27:03.222Z,1543915623.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:27:03.223Z,1543915623.223 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:27:03.591Z,1543915623.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:27:03.591Z,1543915623.591 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-04T09:27:03.592Z,1543915623.592 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:27:03.592Z,1543915623.592 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-04T09:27:03.974Z,1543915623.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:27:03.975Z,1543915623.975 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:27:03.975Z,1543915623.975 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:27:03.976Z,1543915623.976 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:27:03.976Z,1543915623.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:27:03.976Z,1543915623.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:28:27.538Z,1543915707.538 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T09:28:27.538Z,1543915707.538 [Default:CheckIn:C.Wait] Stopped 2018-12-04T09:28:27.538Z,1543915707.538 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T09:28:27.538Z,1543915707.538 [Default:CheckIn:D] Running Loop=1 2018-12-04T09:28:27.942Z,1543915707.942 [Default:CheckIn:D] Stopped 2018-12-04T09:28:27.942Z,1543915707.942 [Default:CheckIn:E] Running Loop=1 2018-12-04T09:28:28.338Z,1543915708.338 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 733.598633 min 2018-12-04T09:28:28.338Z,1543915708.338 [Default:CheckIn:E] Stopped 2018-12-04T09:28:28.338Z,1543915708.338 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T09:28:28.339Z,1543915708.339 [Default:CheckIn] Stopped 2018-12-04T09:28:28.339Z,1543915708.339 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T09:28:28.339Z,1543915708.339 [Default:CheckIn](INFO): Running loop #72 2018-12-04T09:28:28.339Z,1543915708.339 [Default:CheckIn] Running Loop=72 2018-12-04T09:28:28.339Z,1543915708.339 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T09:28:28.339Z,1543915708.339 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T09:28:29.103Z,1543915709.103 [NAL9602](INFO): Powering up 2018-12-04T09:28:40.304Z,1543915720.304 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:28:41.108Z,1543915721.108 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T09:28:41.108Z,1543915721.108 [NAL9602] Data Fault, FailCount= 2 2018-12-04T09:28:41.108Z,1543915721.108 [NAL9602](ERROR): Data Fault 2018-12-04T09:28:41.171Z,1543915721.171 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T09:28:41.504Z,1543915721.504 [NAL9602](INFO): Powering down 2018-12-04T09:28:42.369Z,1543915722.369 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T09:28:42.369Z,1543915722.369 [NAL9602] No Fault, FailCount= 2 2018-12-04T09:29:04.375Z,1543915744.375 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:29:04.375Z,1543915744.375 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-04T09:29:04.375Z,1543915744.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:29:04.377Z,1543915744.377 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:29:04.377Z,1543915744.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-04T09:29:04.377Z,1543915744.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:29:04.391Z,1543915744.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:29:04.391Z,1543915744.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:29:04.792Z,1543915744.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:29:04.792Z,1543915744.792 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-04T09:29:04.793Z,1543915744.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:29:04.793Z,1543915744.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-04T09:29:05.181Z,1543915745.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:29:05.181Z,1543915745.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:29:05.182Z,1543915745.182 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:29:05.182Z,1543915745.182 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:29:05.182Z,1543915745.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:29:05.183Z,1543915745.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:29:11.552Z,1543915751.552 [NAL9602](INFO): Powering up NAL9602 2018-12-04T09:29:23.560Z,1543915763.560 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:31:05.278Z,1543915865.278 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:31:05.279Z,1543915865.279 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-04T09:31:05.279Z,1543915865.279 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:31:05.281Z,1543915865.281 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:31:05.281Z,1543915865.281 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-04T09:31:05.281Z,1543915865.281 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:31:05.323Z,1543915865.323 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:31:05.323Z,1543915865.323 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:31:05.727Z,1543915865.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:31:05.727Z,1543915865.727 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-04T09:31:05.728Z,1543915865.728 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:31:05.728Z,1543915865.728 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-04T09:31:08.789Z,1543915868.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:31:08.790Z,1543915868.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:31:08.790Z,1543915868.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:31:08.791Z,1543915868.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:31:08.792Z,1543915868.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:31:08.792Z,1543915868.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:33:08.862Z,1543915988.862 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:33:08.862Z,1543915988.862 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-04T09:33:08.863Z,1543915988.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:33:08.865Z,1543915988.865 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:33:08.865Z,1543915988.865 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-04T09:33:08.865Z,1543915988.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:33:08.878Z,1543915988.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:33:08.878Z,1543915988.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:33:09.272Z,1543915989.272 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:33:09.272Z,1543915989.272 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-04T09:33:09.273Z,1543915989.273 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:33:09.273Z,1543915989.273 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-04T09:33:09.654Z,1543915989.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:33:09.654Z,1543915989.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:33:09.655Z,1543915989.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:33:09.655Z,1543915989.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:33:09.655Z,1543915989.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:33:09.656Z,1543915989.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:33:15.671Z,1543915995.671 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T09:33:29.966Z,1543916009.966 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T09:28:28.3Z 2018-12-04T09:33:29.966Z,1543916009.966 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T09:33:29.966Z,1543916009.966 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T09:33:34.913Z,1543916014.913 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0213.lzma 2018-12-04T09:33:35.693Z,1543916015.693 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0213.lzma.bak 2018-12-04T09:33:35.693Z,1543916015.693 [DataOverHttps](INFO): SBD MOMSN=8963813 2018-12-04T09:33:45.580Z,1543916025.580 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0214.lzma 2018-12-04T09:33:46.355Z,1543916026.355 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0214.lzma.bak 2018-12-04T09:33:46.355Z,1543916026.355 [DataOverHttps](INFO): SBD MOMSN=8963815 2018-12-04T09:33:47.666Z,1543916027.666 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T09:33:47.666Z,1543916027.666 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T09:33:47.666Z,1543916027.666 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T09:34:27.001Z,1543916067.001 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T09:34:57.796Z,1543916097.796 [NAL9602](INFO): Powering down 2018-12-04T09:35:09.791Z,1543916109.791 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:35:09.791Z,1543916109.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-04T09:35:09.791Z,1543916109.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:35:09.793Z,1543916109.793 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:35:09.793Z,1543916109.793 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-04T09:35:09.793Z,1543916109.793 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:35:09.806Z,1543916109.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:35:09.807Z,1543916109.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:35:10.206Z,1543916110.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:35:10.206Z,1543916110.206 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-04T09:35:10.206Z,1543916110.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:35:10.207Z,1543916110.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-04T09:35:10.590Z,1543916110.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:35:10.591Z,1543916110.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:35:10.591Z,1543916110.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:35:10.591Z,1543916110.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:35:10.592Z,1543916110.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:35:10.592Z,1543916110.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:37:10.699Z,1543916230.699 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:37:10.699Z,1543916230.699 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-04T09:37:10.700Z,1543916230.700 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:37:10.702Z,1543916230.702 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:37:10.702Z,1543916230.702 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-04T09:37:10.702Z,1543916230.702 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:37:10.715Z,1543916230.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:37:10.716Z,1543916230.716 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:37:11.117Z,1543916231.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:37:11.117Z,1543916231.117 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-04T09:37:11.118Z,1543916231.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:37:11.118Z,1543916231.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-04T09:37:11.506Z,1543916231.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:37:11.507Z,1543916231.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:37:11.507Z,1543916231.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:37:11.507Z,1543916231.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:37:11.508Z,1543916231.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:37:11.508Z,1543916231.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:38:48.010Z,1543916328.010 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T09:38:48.010Z,1543916328.010 [Default:CheckIn:C.Wait] Stopped 2018-12-04T09:38:48.010Z,1543916328.010 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T09:38:48.010Z,1543916328.010 [Default:CheckIn:D] Running Loop=1 2018-12-04T09:38:48.410Z,1543916328.410 [Default:CheckIn:D] Stopped 2018-12-04T09:38:48.410Z,1543916328.410 [Default:CheckIn:E] Running Loop=1 2018-12-04T09:38:48.801Z,1543916328.801 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 743.939779 min 2018-12-04T09:38:48.801Z,1543916328.801 [Default:CheckIn:E] Stopped 2018-12-04T09:38:48.801Z,1543916328.801 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T09:38:48.801Z,1543916328.801 [Default:CheckIn] Stopped 2018-12-04T09:38:48.801Z,1543916328.801 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T09:38:48.802Z,1543916328.802 [Default:CheckIn](INFO): Running loop #73 2018-12-04T09:38:48.802Z,1543916328.802 [Default:CheckIn] Running Loop=73 2018-12-04T09:38:48.802Z,1543916328.802 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T09:38:48.802Z,1543916328.802 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T09:38:49.575Z,1543916329.575 [NAL9602](INFO): Powering up 2018-12-04T09:39:00.776Z,1543916340.776 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:39:11.566Z,1543916351.566 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:39:11.566Z,1543916351.566 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-04T09:39:11.566Z,1543916351.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:39:11.568Z,1543916351.568 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:39:11.568Z,1543916351.568 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-04T09:39:11.569Z,1543916351.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:39:11.582Z,1543916351.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:39:11.582Z,1543916351.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:39:11.979Z,1543916351.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:39:11.979Z,1543916351.979 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-04T09:39:11.980Z,1543916351.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:39:11.980Z,1543916351.980 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-04T09:39:12.370Z,1543916352.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:39:12.372Z,1543916352.372 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:39:12.372Z,1543916352.372 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:39:12.372Z,1543916352.372 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:39:12.373Z,1543916352.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:39:12.373Z,1543916352.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:41:12.438Z,1543916472.438 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:41:12.438Z,1543916472.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-04T09:41:12.438Z,1543916472.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:41:12.440Z,1543916472.440 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:41:12.440Z,1543916472.440 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-04T09:41:12.441Z,1543916472.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:41:12.478Z,1543916472.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:41:12.479Z,1543916472.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:41:12.850Z,1543916472.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:41:12.850Z,1543916472.850 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-04T09:41:12.850Z,1543916472.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:41:12.850Z,1543916472.850 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-04T09:41:13.238Z,1543916473.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:41:13.239Z,1543916473.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:41:13.239Z,1543916473.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:41:13.239Z,1543916473.239 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:41:13.240Z,1543916473.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:41:13.240Z,1543916473.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:43:14.732Z,1543916594.732 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:43:14.732Z,1543916594.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-04T09:43:14.732Z,1543916594.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:43:14.735Z,1543916594.735 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:43:14.735Z,1543916594.735 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-04T09:43:14.735Z,1543916594.735 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:43:14.748Z,1543916594.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:43:14.748Z,1543916594.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:43:14.875Z,1543916594.875 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:43:14.875Z,1543916594.875 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-04T09:43:14.876Z,1543916594.876 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:43:14.876Z,1543916594.876 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-04T09:43:15.206Z,1543916595.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:43:15.207Z,1543916595.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:43:15.207Z,1543916595.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:43:15.207Z,1543916595.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:43:15.208Z,1543916595.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:43:15.208Z,1543916595.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:43:50.074Z,1543916630.074 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T09:38:48.8Z 2018-12-04T09:43:50.074Z,1543916630.074 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T09:43:50.075Z,1543916630.075 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T09:43:55.072Z,1543916635.072 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0216.lzma 2018-12-04T09:43:55.853Z,1543916635.853 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0216.lzma.bak 2018-12-04T09:43:55.853Z,1543916635.853 [DataOverHttps](INFO): SBD MOMSN=8963846 2018-12-04T09:44:05.262Z,1543916645.262 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T09:44:05.351Z,1543916645.351 [DataOverHttps](INFO): Sending 285 bytes from file Logs/20181203T211451/Express0217.lzma 2018-12-04T09:44:06.141Z,1543916646.141 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0217.lzma.bak 2018-12-04T09:44:06.141Z,1543916646.141 [DataOverHttps](INFO): SBD MOMSN=8963848 2018-12-04T09:44:07.473Z,1543916647.473 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T09:44:07.473Z,1543916647.473 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T09:44:07.473Z,1543916647.473 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T09:44:35.583Z,1543916675.583 [NAL9602](INFO): Powering down 2018-12-04T09:45:15.566Z,1543916715.566 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:45:15.567Z,1543916715.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-04T09:45:15.567Z,1543916715.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:45:15.569Z,1543916715.569 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:45:15.569Z,1543916715.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-04T09:45:15.569Z,1543916715.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:45:15.613Z,1543916715.613 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:45:15.613Z,1543916715.613 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:45:15.998Z,1543916715.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:45:15.998Z,1543916715.998 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-04T09:45:15.999Z,1543916715.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:45:15.999Z,1543916715.999 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-04T09:45:16.378Z,1543916716.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:45:16.379Z,1543916716.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:45:16.379Z,1543916716.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:45:16.379Z,1543916716.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:45:16.380Z,1543916716.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:45:16.380Z,1543916716.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:47:16.570Z,1543916836.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:47:16.570Z,1543916836.570 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-04T09:47:16.570Z,1543916836.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:47:16.572Z,1543916836.572 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:47:16.572Z,1543916836.572 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-04T09:47:16.573Z,1543916836.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:47:16.587Z,1543916836.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:47:16.588Z,1543916836.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:47:16.983Z,1543916836.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:47:16.983Z,1543916836.983 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-04T09:47:16.984Z,1543916836.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:47:16.984Z,1543916836.984 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-04T09:47:17.370Z,1543916837.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:47:17.370Z,1543916837.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:47:17.371Z,1543916837.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:47:17.371Z,1543916837.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:47:17.371Z,1543916837.371 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:47:17.372Z,1543916837.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:49:07.650Z,1543916947.650 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T09:49:07.650Z,1543916947.650 [Default:CheckIn:C.Wait] Stopped 2018-12-04T09:49:07.650Z,1543916947.650 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T09:49:07.650Z,1543916947.650 [Default:CheckIn:D] Running Loop=1 2018-12-04T09:49:08.060Z,1543916948.060 [Default:CheckIn:D] Stopped 2018-12-04T09:49:08.060Z,1543916948.060 [Default:CheckIn:E] Running Loop=1 2018-12-04T09:49:08.451Z,1543916948.451 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 754.267318 min 2018-12-04T09:49:08.451Z,1543916948.451 [Default:CheckIn:E] Stopped 2018-12-04T09:49:08.452Z,1543916948.452 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T09:49:08.452Z,1543916948.452 [Default:CheckIn] Stopped 2018-12-04T09:49:08.452Z,1543916948.452 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T09:49:08.452Z,1543916948.452 [Default:CheckIn](INFO): Running loop #74 2018-12-04T09:49:08.452Z,1543916948.452 [Default:CheckIn] Running Loop=74 2018-12-04T09:49:08.452Z,1543916948.452 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T09:49:08.452Z,1543916948.452 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T09:49:09.224Z,1543916949.224 [NAL9602](INFO): Powering up 2018-12-04T09:49:17.650Z,1543916957.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:49:17.651Z,1543916957.651 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-04T09:49:17.651Z,1543916957.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:49:17.653Z,1543916957.653 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:49:17.653Z,1543916957.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-04T09:49:17.653Z,1543916957.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:49:17.667Z,1543916957.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:49:17.667Z,1543916957.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:49:18.066Z,1543916958.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:49:18.066Z,1543916958.066 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-04T09:49:18.067Z,1543916958.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:49:18.067Z,1543916958.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-04T09:49:18.445Z,1543916958.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:49:18.446Z,1543916958.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:49:18.446Z,1543916958.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:49:18.447Z,1543916958.447 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:49:18.447Z,1543916958.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:49:18.447Z,1543916958.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:49:20.424Z,1543916960.424 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:49:21.224Z,1543916961.224 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T09:49:21.224Z,1543916961.224 [NAL9602] Data Fault, FailCount= 3 2018-12-04T09:49:21.224Z,1543916961.224 [NAL9602](ERROR): Data Fault 2018-12-04T09:49:21.298Z,1543916961.298 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T09:49:21.624Z,1543916961.624 [NAL9602](INFO): Powering down 2018-12-04T09:49:22.468Z,1543916962.468 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T09:49:22.468Z,1543916962.468 [NAL9602] No Fault, FailCount= 3 2018-12-04T09:49:51.740Z,1543916991.740 [NAL9602](INFO): Powering up NAL9602 2018-12-04T09:50:03.760Z,1543917003.760 [NAL9602](INFO): NAL9602 initialized 2018-12-04T09:51:18.682Z,1543917078.682 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:51:18.682Z,1543917078.682 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-04T09:51:18.682Z,1543917078.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:51:18.684Z,1543917078.684 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:51:18.684Z,1543917078.684 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-04T09:51:18.684Z,1543917078.684 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:51:18.698Z,1543917078.698 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:51:18.699Z,1543917078.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:51:19.102Z,1543917079.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:51:19.102Z,1543917079.102 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-04T09:51:19.102Z,1543917079.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:51:19.102Z,1543917079.102 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-04T09:51:19.490Z,1543917079.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:51:19.490Z,1543917079.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:51:19.491Z,1543917079.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:51:19.491Z,1543917079.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:51:19.491Z,1543917079.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:51:19.492Z,1543917079.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:51:19.859Z,1543917079.859 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T09:51:19.859Z,1543917079.859 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T09:51:19.859Z,1543917079.859 [DropWeight](ERROR): Hardware Fault 2018-12-04T09:51:19.943Z,1543917079.943 [CBIT](INFO): Critical error at 20181204T095119 2018-12-04T09:51:19.945Z,1543917079.945 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T09:51:19.946Z,1543917079.946 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T09:51:20.318Z,1543917080.318 [CBIT](INFO): Critical error at 20181204T095119 2018-12-04T09:53:19.534Z,1543917199.534 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:53:19.534Z,1543917199.534 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-04T09:53:19.534Z,1543917199.534 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:53:19.537Z,1543917199.537 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:53:19.537Z,1543917199.537 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-04T09:53:19.537Z,1543917199.537 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:53:19.550Z,1543917199.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:53:19.550Z,1543917199.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:53:19.985Z,1543917199.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:53:19.985Z,1543917199.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-04T09:53:19.985Z,1543917199.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:53:19.985Z,1543917199.985 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-04T09:53:20.349Z,1543917200.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:53:20.349Z,1543917200.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:53:20.349Z,1543917200.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:53:20.350Z,1543917200.350 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:53:20.350Z,1543917200.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:53:20.351Z,1543917200.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:54:09.938Z,1543917249.938 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T09:49:08.5Z 2018-12-04T09:54:09.938Z,1543917249.938 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T09:54:09.939Z,1543917249.939 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T09:54:14.841Z,1543917254.841 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0219.lzma 2018-12-04T09:54:15.625Z,1543917255.625 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0219.lzma.bak 2018-12-04T09:54:15.625Z,1543917255.625 [DataOverHttps](INFO): SBD MOMSN=8963878 2018-12-04T09:54:25.510Z,1543917265.510 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0220.lzma 2018-12-04T09:54:26.297Z,1543917266.297 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0220.lzma.bak 2018-12-04T09:54:26.297Z,1543917266.297 [DataOverHttps](INFO): SBD MOMSN=8963882 2018-12-04T09:54:27.674Z,1543917267.674 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T09:54:27.674Z,1543917267.674 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T09:54:27.674Z,1543917267.674 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T09:55:07.264Z,1543917307.264 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T09:55:20.495Z,1543917320.495 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:55:20.495Z,1543917320.495 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-04T09:55:20.495Z,1543917320.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:55:20.497Z,1543917320.497 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:55:20.497Z,1543917320.497 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-04T09:55:20.497Z,1543917320.497 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:55:20.510Z,1543917320.510 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:55:20.511Z,1543917320.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:55:20.890Z,1543917320.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:55:20.890Z,1543917320.890 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-04T09:55:20.903Z,1543917320.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:55:20.903Z,1543917320.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-04T09:55:21.278Z,1543917321.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:55:21.279Z,1543917321.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:55:21.279Z,1543917321.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:55:21.279Z,1543917321.279 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:55:21.280Z,1543917321.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:55:21.280Z,1543917321.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:55:38.059Z,1543917338.059 [NAL9602](INFO): Powering down 2018-12-04T09:57:21.294Z,1543917441.294 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:57:21.294Z,1543917441.294 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-04T09:57:21.294Z,1543917441.294 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:57:21.296Z,1543917441.296 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:57:21.296Z,1543917441.296 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-04T09:57:21.297Z,1543917441.297 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:57:21.310Z,1543917441.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:57:21.310Z,1543917441.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:57:21.706Z,1543917441.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:57:21.706Z,1543917441.706 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-04T09:57:21.706Z,1543917441.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:57:21.707Z,1543917441.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-04T09:57:22.094Z,1543917442.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:57:22.094Z,1543917442.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:57:22.095Z,1543917442.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:57:22.095Z,1543917442.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:57:22.095Z,1543917442.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:57:22.096Z,1543917442.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:59:22.202Z,1543917562.202 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:59:22.202Z,1543917562.202 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-04T09:59:22.202Z,1543917562.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T09:59:22.204Z,1543917562.204 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T09:59:22.204Z,1543917562.204 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-04T09:59:22.204Z,1543917562.204 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T09:59:22.218Z,1543917562.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T09:59:22.218Z,1543917562.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T09:59:22.609Z,1543917562.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T09:59:22.609Z,1543917562.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-04T09:59:22.610Z,1543917562.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T09:59:22.610Z,1543917562.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-04T09:59:22.998Z,1543917562.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T09:59:22.999Z,1543917562.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:59:22.999Z,1543917562.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:59:22.999Z,1543917562.999 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T09:59:22.000Z,1543917563.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T09:59:22.000Z,1543917563.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T09:59:27.805Z,1543917567.805 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T09:59:27.805Z,1543917567.805 [Default:CheckIn:C.Wait] Stopped 2018-12-04T09:59:27.805Z,1543917567.805 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T09:59:27.805Z,1543917567.805 [Default:CheckIn:D] Running Loop=1 2018-12-04T09:59:28.214Z,1543917568.214 [Default:CheckIn:D] Stopped 2018-12-04T09:59:28.214Z,1543917568.214 [Default:CheckIn:E] Running Loop=1 2018-12-04T09:59:28.609Z,1543917568.609 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 764.603190 min 2018-12-04T09:59:28.609Z,1543917568.609 [Default:CheckIn:E] Stopped 2018-12-04T09:59:28.609Z,1543917568.609 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T09:59:28.609Z,1543917568.609 [Default:CheckIn] Stopped 2018-12-04T09:59:28.609Z,1543917568.609 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T09:59:28.609Z,1543917568.609 [Default:CheckIn](INFO): Running loop #75 2018-12-04T09:59:28.609Z,1543917568.609 [Default:CheckIn] Running Loop=75 2018-12-04T09:59:28.610Z,1543917568.610 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T09:59:28.610Z,1543917568.610 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T09:59:29.382Z,1543917569.382 [NAL9602](INFO): Powering up 2018-12-04T09:59:40.571Z,1543917580.571 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:01:23.023Z,1543917683.023 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:01:23.023Z,1543917683.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-04T10:01:23.023Z,1543917683.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:01:23.025Z,1543917683.025 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:01:23.026Z,1543917683.026 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-04T10:01:23.026Z,1543917683.026 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:01:23.068Z,1543917683.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:01:23.069Z,1543917683.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:01:23.442Z,1543917683.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:01:23.442Z,1543917683.442 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-04T10:01:23.443Z,1543917683.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:01:23.443Z,1543917683.443 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-04T10:01:23.819Z,1543917683.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:01:23.819Z,1543917683.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:01:23.820Z,1543917683.820 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:01:23.820Z,1543917683.820 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:01:23.820Z,1543917683.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:01:23.821Z,1543917683.821 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:03:23.992Z,1543917803.992 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:03:23.992Z,1543917803.992 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-04T10:03:23.992Z,1543917803.992 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:03:23.994Z,1543917803.994 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:03:23.994Z,1543917803.994 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-04T10:03:23.994Z,1543917803.994 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:03:24.008Z,1543917804.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:03:24.008Z,1543917804.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:03:24.419Z,1543917804.419 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:03:24.419Z,1543917804.419 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-04T10:03:24.419Z,1543917804.419 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:03:24.420Z,1543917804.420 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-04T10:03:24.795Z,1543917804.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:03:24.795Z,1543917804.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:03:24.795Z,1543917804.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:03:24.796Z,1543917804.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:03:24.796Z,1543917804.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:03:24.796Z,1543917804.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:04:29.870Z,1543917869.870 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T09:59:28.6Z 2018-12-04T10:04:29.870Z,1543917869.870 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T10:04:29.871Z,1543917869.871 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T10:04:34.937Z,1543917874.937 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0222.lzma 2018-12-04T10:04:35.737Z,1543917875.737 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0222.lzma.bak 2018-12-04T10:04:35.737Z,1543917875.737 [DataOverHttps](INFO): SBD MOMSN=8963915 2018-12-04T10:04:45.088Z,1543917885.088 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T10:04:45.548Z,1543917885.548 [DataOverHttps](INFO): Sending 285 bytes from file Logs/20181203T211451/Express0223.lzma 2018-12-04T10:04:46.345Z,1543917886.345 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0223.lzma.bak 2018-12-04T10:04:46.345Z,1543917886.345 [DataOverHttps](INFO): SBD MOMSN=8963917 2018-12-04T10:04:47.663Z,1543917887.663 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T10:04:47.663Z,1543917887.663 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T10:04:47.663Z,1543917887.663 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T10:05:15.403Z,1543917915.403 [NAL9602](INFO): Powering down 2018-12-04T10:05:26.592Z,1543917926.592 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:05:26.592Z,1543917926.592 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-04T10:05:26.592Z,1543917926.592 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:05:26.594Z,1543917926.594 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:05:26.594Z,1543917926.594 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-04T10:05:26.594Z,1543917926.594 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:05:26.609Z,1543917926.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:05:26.609Z,1543917926.609 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:05:26.723Z,1543917926.723 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:05:26.723Z,1543917926.723 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-04T10:05:26.724Z,1543917926.724 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:05:26.724Z,1543917926.724 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-04T10:05:27.050Z,1543917927.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:05:27.050Z,1543917927.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:05:27.051Z,1543917927.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:05:27.051Z,1543917927.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:05:27.052Z,1543917927.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:05:27.052Z,1543917927.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:06:19.872Z,1543917979.872 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T10:06:19.872Z,1543917979.872 [DropWeight] No Fault, FailCount= 1 2018-12-04T10:07:27.362Z,1543918047.362 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:07:27.362Z,1543918047.362 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-04T10:07:27.362Z,1543918047.362 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:07:27.364Z,1543918047.364 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:07:27.364Z,1543918047.364 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-04T10:07:27.364Z,1543918047.364 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:07:27.379Z,1543918047.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:07:27.379Z,1543918047.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:07:27.777Z,1543918047.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:07:27.777Z,1543918047.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-04T10:07:27.777Z,1543918047.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:07:27.777Z,1543918047.777 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-04T10:07:28.170Z,1543918048.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:07:28.170Z,1543918048.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:07:28.171Z,1543918048.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:07:28.171Z,1543918048.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:07:28.171Z,1543918048.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:07:28.172Z,1543918048.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:09:28.337Z,1543918168.337 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:09:28.337Z,1543918168.337 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-04T10:09:28.337Z,1543918168.337 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:09:28.339Z,1543918168.339 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:09:28.339Z,1543918168.339 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-04T10:09:28.339Z,1543918168.339 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:09:28.352Z,1543918168.352 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:09:28.353Z,1543918168.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:09:28.755Z,1543918168.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:09:28.755Z,1543918168.755 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-04T10:09:28.756Z,1543918168.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:09:28.756Z,1543918168.756 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-04T10:09:29.130Z,1543918169.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:09:29.130Z,1543918169.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:09:29.131Z,1543918169.131 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:09:29.131Z,1543918169.131 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:09:29.132Z,1543918169.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:09:29.132Z,1543918169.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:09:47.969Z,1543918187.969 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T10:09:47.970Z,1543918187.970 [Default:CheckIn:C.Wait] Stopped 2018-12-04T10:09:47.970Z,1543918187.970 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T10:09:47.970Z,1543918187.970 [Default:CheckIn:D] Running Loop=1 2018-12-04T10:09:48.363Z,1543918188.363 [Default:CheckIn:D] Stopped 2018-12-04T10:09:48.363Z,1543918188.363 [Default:CheckIn:E] Running Loop=1 2018-12-04T10:09:48.769Z,1543918188.769 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 774.938997 min 2018-12-04T10:09:48.770Z,1543918188.770 [Default:CheckIn:E] Stopped 2018-12-04T10:09:48.770Z,1543918188.770 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T10:09:48.770Z,1543918188.770 [Default:CheckIn] Stopped 2018-12-04T10:09:48.770Z,1543918188.770 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T10:09:48.770Z,1543918188.770 [Default:CheckIn](INFO): Running loop #76 2018-12-04T10:09:48.771Z,1543918188.771 [Default:CheckIn] Running Loop=76 2018-12-04T10:09:48.771Z,1543918188.771 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T10:09:48.771Z,1543918188.771 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T10:09:49.535Z,1543918189.535 [NAL9602](INFO): Powering up 2018-12-04T10:10:00.736Z,1543918200.736 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:10:01.536Z,1543918201.536 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T10:10:01.536Z,1543918201.536 [NAL9602] Data Fault, FailCount= 4 2018-12-04T10:10:01.536Z,1543918201.536 [NAL9602](ERROR): Data Fault 2018-12-04T10:10:01.593Z,1543918201.593 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T10:10:01.933Z,1543918201.933 [NAL9602](INFO): Powering down 2018-12-04T10:10:02.774Z,1543918202.774 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T10:10:02.775Z,1543918202.775 [NAL9602] No Fault, FailCount= 4 2018-12-04T10:10:32.332Z,1543918232.332 [NAL9602](INFO): Powering up NAL9602 2018-12-04T10:10:43.896Z,1543918243.896 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:11:29.198Z,1543918289.198 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:11:29.198Z,1543918289.198 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-04T10:11:29.198Z,1543918289.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:11:29.200Z,1543918289.200 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:11:29.200Z,1543918289.200 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-04T10:11:29.201Z,1543918289.201 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:11:29.214Z,1543918289.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:11:29.214Z,1543918289.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:11:29.619Z,1543918289.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:11:29.619Z,1543918289.619 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-04T10:11:29.619Z,1543918289.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:11:29.619Z,1543918289.619 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-04T10:11:30.002Z,1543918290.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:11:30.002Z,1543918290.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:11:30.003Z,1543918290.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:11:30.003Z,1543918290.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:11:30.003Z,1543918290.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:11:30.004Z,1543918290.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:13:30.006Z,1543918410.006 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:13:30.006Z,1543918410.006 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-04T10:13:30.006Z,1543918410.006 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:13:30.008Z,1543918410.008 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:13:30.008Z,1543918410.008 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-04T10:13:30.009Z,1543918410.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:13:30.022Z,1543918410.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:13:30.023Z,1543918410.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:13:30.413Z,1543918410.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:13:30.413Z,1543918410.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-04T10:13:30.414Z,1543918410.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:13:30.414Z,1543918410.414 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-04T10:13:30.801Z,1543918410.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:13:30.802Z,1543918410.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:13:30.802Z,1543918410.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:13:30.803Z,1543918410.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:13:30.803Z,1543918410.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:13:30.803Z,1543918410.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:14:50.047Z,1543918490.047 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T10:09:48.8Z 2018-12-04T10:14:50.047Z,1543918490.047 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T10:14:50.047Z,1543918490.047 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T10:14:55.084Z,1543918495.084 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0225.lzma 2018-12-04T10:14:55.883Z,1543918495.883 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0225.lzma.bak 2018-12-04T10:14:55.883Z,1543918495.883 [DataOverHttps](INFO): SBD MOMSN=8963945 2018-12-04T10:15:05.766Z,1543918505.766 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0226.lzma 2018-12-04T10:15:06.533Z,1543918506.533 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0226.lzma.bak 2018-12-04T10:15:06.533Z,1543918506.533 [DataOverHttps](INFO): SBD MOMSN=8963947 2018-12-04T10:15:07.866Z,1543918507.866 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T10:15:07.866Z,1543918507.866 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T10:15:07.866Z,1543918507.866 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T10:15:31.114Z,1543918531.114 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:15:31.114Z,1543918531.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-04T10:15:31.114Z,1543918531.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:15:31.117Z,1543918531.117 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:15:31.117Z,1543918531.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-04T10:15:31.117Z,1543918531.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:15:31.130Z,1543918531.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:15:31.131Z,1543918531.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:15:31.555Z,1543918531.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:15:31.555Z,1543918531.555 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-04T10:15:31.556Z,1543918531.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:15:31.556Z,1543918531.556 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-04T10:15:31.927Z,1543918531.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:15:31.927Z,1543918531.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:15:31.927Z,1543918531.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:15:31.928Z,1543918531.928 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:15:31.928Z,1543918531.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:15:31.928Z,1543918531.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:15:47.052Z,1543918547.052 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T10:16:17.849Z,1543918577.849 [NAL9602](INFO): Powering down 2018-12-04T10:17:32.310Z,1543918652.310 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:17:32.310Z,1543918652.310 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-04T10:17:32.310Z,1543918652.310 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:17:32.312Z,1543918652.312 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:17:32.313Z,1543918652.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-04T10:17:32.313Z,1543918652.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:17:32.326Z,1543918652.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:17:32.326Z,1543918652.326 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:17:32.327Z,1543918652.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:17:32.327Z,1543918652.327 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:20:07.988Z,1543918807.988 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T10:20:07.988Z,1543918807.988 [Default:CheckIn:C.Wait] Stopped 2018-12-04T10:20:07.988Z,1543918807.988 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T10:20:07.988Z,1543918807.988 [Default:CheckIn:D] Running Loop=1 2018-12-04T10:20:08.395Z,1543918808.395 [Default:CheckIn:D] Stopped 2018-12-04T10:20:08.395Z,1543918808.395 [Default:CheckIn:E] Running Loop=1 2018-12-04T10:20:08.790Z,1543918808.790 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 785.272852 min 2018-12-04T10:20:08.790Z,1543918808.790 [Default:CheckIn:E] Stopped 2018-12-04T10:20:08.790Z,1543918808.790 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T10:20:08.790Z,1543918808.790 [Default:CheckIn] Stopped 2018-12-04T10:20:08.791Z,1543918808.791 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T10:20:08.791Z,1543918808.791 [Default:CheckIn](INFO): Running loop #77 2018-12-04T10:20:08.791Z,1543918808.791 [Default:CheckIn] Running Loop=77 2018-12-04T10:20:08.791Z,1543918808.791 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T10:20:08.791Z,1543918808.791 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T10:20:09.562Z,1543918809.562 [NAL9602](INFO): Powering up 2018-12-04T10:20:20.364Z,1543918820.364 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:20:52.372Z,1543918852.372 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T10:20:52.450Z,1543918852.450 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T10:20:52.450Z,1543918852.450 [NAL9602] Data Fault, FailCount= 5 2018-12-04T10:20:52.450Z,1543918852.450 [NAL9602](ERROR): Data Fault 2018-12-04T10:20:52.507Z,1543918852.507 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T10:20:52.507Z,1543918852.507 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T10:20:52.772Z,1543918852.772 [NAL9602](INFO): Powering down 2018-12-04T10:20:52.822Z,1543918852.822 [CBIT](INFO): Critical error at 20181204T102052 2018-12-04T10:22:52.785Z,1543918972.785 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T10:22:52.785Z,1543918972.785 [NAL9602] No Fault, FailCount= 5 2018-12-04T10:22:53.156Z,1543918973.156 [NAL9602](INFO): Powering up NAL9602 2018-12-04T10:23:04.356Z,1543918984.356 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:23:05.156Z,1543918985.156 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T10:23:05.156Z,1543918985.156 [NAL9602] Data Fault, FailCount= 1 2018-12-04T10:23:05.156Z,1543918985.156 [NAL9602](ERROR): Data Fault 2018-12-04T10:23:05.193Z,1543918985.193 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T10:23:05.555Z,1543918985.555 [NAL9602](INFO): Powering down 2018-12-04T10:23:06.390Z,1543918986.390 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T10:23:06.390Z,1543918986.390 [NAL9602] No Fault, FailCount= 1 2018-12-04T10:23:35.940Z,1543919015.940 [NAL9602](INFO): Powering up NAL9602 2018-12-04T10:23:47.136Z,1543919027.136 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:25:09.872Z,1543919109.872 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T10:20:08.8Z 2018-12-04T10:25:09.872Z,1543919109.872 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T10:25:09.872Z,1543919109.872 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T10:25:14.967Z,1543919114.967 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0228.lzma 2018-12-04T10:25:15.709Z,1543919115.709 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0228.lzma.bak 2018-12-04T10:25:15.709Z,1543919115.709 [DataOverHttps](INFO): SBD MOMSN=8963977 2018-12-04T10:25:25.445Z,1543919125.445 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T10:25:25.503Z,1543919125.503 [DataOverHttps](INFO): Sending 390 bytes from file Logs/20181203T211451/Express0229.lzma 2018-12-04T10:25:26.302Z,1543919126.302 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0229.lzma.bak 2018-12-04T10:25:26.302Z,1543919126.302 [DataOverHttps](INFO): SBD MOMSN=8963980 2018-12-04T10:25:27.737Z,1543919127.737 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T10:25:27.738Z,1543919127.738 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T10:25:27.738Z,1543919127.738 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T10:25:55.894Z,1543919155.894 [NAL9602](INFO): Powering down 2018-12-04T10:30:28.143Z,1543919428.143 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T10:30:28.143Z,1543919428.143 [Default:CheckIn:C.Wait] Stopped 2018-12-04T10:30:28.143Z,1543919428.143 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T10:30:28.143Z,1543919428.143 [Default:CheckIn:D] Running Loop=1 2018-12-04T10:30:28.537Z,1543919428.537 [Default:CheckIn:D] Stopped 2018-12-04T10:30:28.537Z,1543919428.537 [Default:CheckIn:E] Running Loop=1 2018-12-04T10:30:28.938Z,1543919428.938 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 795.608594 min 2018-12-04T10:30:28.938Z,1543919428.938 [Default:CheckIn:E] Stopped 2018-12-04T10:30:28.938Z,1543919428.938 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T10:30:28.939Z,1543919428.939 [Default:CheckIn] Stopped 2018-12-04T10:30:28.939Z,1543919428.939 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T10:30:28.939Z,1543919428.939 [Default:CheckIn](INFO): Running loop #78 2018-12-04T10:30:28.939Z,1543919428.939 [Default:CheckIn] Running Loop=78 2018-12-04T10:30:28.939Z,1543919428.939 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T10:30:28.939Z,1543919428.939 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T10:30:29.712Z,1543919429.712 [NAL9602](INFO): Powering up 2018-12-04T10:30:40.921Z,1543919440.921 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:31:12.864Z,1543919472.864 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T10:31:12.946Z,1543919472.946 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T10:31:12.946Z,1543919472.946 [NAL9602] Data Fault, FailCount= 2 2018-12-04T10:31:12.946Z,1543919472.946 [NAL9602](ERROR): Data Fault 2018-12-04T10:31:13.010Z,1543919473.010 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T10:31:13.260Z,1543919473.260 [NAL9602](INFO): Powering down 2018-12-04T10:31:14.102Z,1543919474.102 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T10:31:14.102Z,1543919474.102 [NAL9602] No Fault, FailCount= 2 2018-12-04T10:31:43.620Z,1543919503.620 [NAL9602](INFO): Powering up NAL9602 2018-12-04T10:31:54.820Z,1543919514.820 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:32:33.771Z,1543919553.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:32:33.771Z,1543919553.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-04T10:32:33.772Z,1543919553.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:32:33.772Z,1543919553.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-04T10:32:33.866Z,1543919553.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:32:33.867Z,1543919553.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:32:33.867Z,1543919553.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:32:33.867Z,1543919553.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:32:33.868Z,1543919553.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:32:33.868Z,1543919553.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:34:21.324Z,1543919661.324 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size. 2018-12-04T10:34:34.114Z,1543919674.114 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:34:34.114Z,1543919674.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-04T10:34:34.114Z,1543919674.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:34:34.117Z,1543919674.117 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:34:34.117Z,1543919674.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-04T10:34:34.117Z,1543919674.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:34:34.131Z,1543919674.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:34:34.131Z,1543919674.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:34:34.527Z,1543919674.527 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:34:34.527Z,1543919674.527 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-04T10:34:34.528Z,1543919674.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:34:34.528Z,1543919674.528 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-04T10:34:34.910Z,1543919674.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:34:34.911Z,1543919674.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:34:34.911Z,1543919674.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:34:34.911Z,1543919674.911 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:34:34.912Z,1543919674.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:34:34.912Z,1543919674.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:35:29.506Z,1543919729.506 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T10:30:28.9Z 2018-12-04T10:35:29.506Z,1543919729.506 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T10:35:29.507Z,1543919729.507 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T10:35:34.576Z,1543919734.576 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0231.lzma 2018-12-04T10:35:35.764Z,1543919735.764 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0231.lzma.bak 2018-12-04T10:35:35.764Z,1543919735.764 [DataOverHttps](INFO): SBD MOMSN=8964008 2018-12-04T10:35:45.017Z,1543919745.017 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T10:35:45.097Z,1543919745.097 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0232.lzma 2018-12-04T10:35:45.893Z,1543919745.893 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0232.lzma.bak 2018-12-04T10:35:45.893Z,1543919745.893 [DataOverHttps](INFO): SBD MOMSN=8964010 2018-12-04T10:35:47.329Z,1543919747.329 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T10:35:47.329Z,1543919747.329 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T10:35:47.330Z,1543919747.330 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T10:36:03.970Z,1543919763.970 [BPC1](ERROR): BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file). 2018-12-04T10:36:15.480Z,1543919775.480 [NAL9602](INFO): Powering down 2018-12-04T10:36:21.079Z,1543919781.079 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T10:36:21.079Z,1543919781.079 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T10:36:21.079Z,1543919781.079 [DropWeight](ERROR): Hardware Fault 2018-12-04T10:36:21.133Z,1543919781.133 [CBIT](INFO): Critical error at 20181204T103621 2018-12-04T10:36:21.136Z,1543919781.136 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T10:36:21.136Z,1543919781.136 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T10:36:21.533Z,1543919781.533 [CBIT](INFO): Critical error at 20181204T103621 2018-12-04T10:36:35.070Z,1543919795.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:36:35.070Z,1543919795.070 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-04T10:36:35.070Z,1543919795.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:36:35.072Z,1543919795.072 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:36:35.072Z,1543919795.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-04T10:36:35.072Z,1543919795.072 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:36:35.085Z,1543919795.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:36:35.086Z,1543919795.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:36:35.493Z,1543919795.493 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:36:35.493Z,1543919795.493 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-04T10:36:35.494Z,1543919795.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:36:35.494Z,1543919795.494 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-04T10:36:35.878Z,1543919795.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:36:35.878Z,1543919795.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:36:35.879Z,1543919795.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:36:35.879Z,1543919795.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:36:35.879Z,1543919795.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:36:35.880Z,1543919795.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:38:36.046Z,1543919916.046 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:38:36.046Z,1543919916.046 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-04T10:38:36.047Z,1543919916.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:38:36.049Z,1543919916.049 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:38:36.049Z,1543919916.049 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-04T10:38:36.049Z,1543919916.049 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:38:36.093Z,1543919916.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:38:36.093Z,1543919916.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:38:36.485Z,1543919916.485 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:38:36.485Z,1543919916.485 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-04T10:38:36.486Z,1543919916.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:38:36.486Z,1543919916.486 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-04T10:38:36.905Z,1543919916.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:38:36.906Z,1543919916.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:38:36.919Z,1543919916.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:38:36.919Z,1543919916.919 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:38:36.920Z,1543919916.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:38:36.920Z,1543919916.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:40:37.083Z,1543920037.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:40:37.083Z,1543920037.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-04T10:40:37.083Z,1543920037.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:40:37.085Z,1543920037.085 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:40:37.085Z,1543920037.085 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-04T10:40:37.085Z,1543920037.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:40:37.132Z,1543920037.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:40:37.133Z,1543920037.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:40:37.482Z,1543920037.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:40:37.482Z,1543920037.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-04T10:40:37.483Z,1543920037.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:40:37.483Z,1543920037.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-04T10:40:37.866Z,1543920037.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:40:37.866Z,1543920037.866 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:40:37.867Z,1543920037.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:40:37.867Z,1543920037.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:40:37.868Z,1543920037.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:40:37.868Z,1543920037.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:40:45.070Z,1543920045.070 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T10:40:47.473Z,1543920047.473 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T10:40:47.474Z,1543920047.474 [Default:CheckIn:C.Wait] Stopped 2018-12-04T10:40:47.474Z,1543920047.474 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T10:40:47.474Z,1543920047.474 [Default:CheckIn:D] Running Loop=1 2018-12-04T10:40:47.875Z,1543920047.875 [Default:CheckIn:D] Stopped 2018-12-04T10:40:47.875Z,1543920047.875 [Default:CheckIn:E] Running Loop=1 2018-12-04T10:40:48.270Z,1543920048.270 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 805.930859 min 2018-12-04T10:40:48.270Z,1543920048.270 [Default:CheckIn:E] Stopped 2018-12-04T10:40:48.270Z,1543920048.270 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T10:40:48.270Z,1543920048.270 [Default:CheckIn] Stopped 2018-12-04T10:40:48.271Z,1543920048.271 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T10:40:48.271Z,1543920048.271 [Default:CheckIn](INFO): Running loop #79 2018-12-04T10:40:48.271Z,1543920048.271 [Default:CheckIn] Running Loop=79 2018-12-04T10:40:48.271Z,1543920048.271 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T10:40:48.271Z,1543920048.271 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T10:40:49.039Z,1543920049.039 [NAL9602](INFO): Powering up 2018-12-04T10:40:59.847Z,1543920059.847 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:41:00.637Z,1543920060.637 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T10:41:00.637Z,1543920060.637 [NAL9602] Data Fault, FailCount= 3 2018-12-04T10:41:00.638Z,1543920060.638 [NAL9602](ERROR): Data Fault 2018-12-04T10:41:00.711Z,1543920060.711 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T10:41:01.039Z,1543920061.039 [NAL9602](INFO): Powering down 2018-12-04T10:41:01.875Z,1543920061.875 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T10:41:01.876Z,1543920061.876 [NAL9602] No Fault, FailCount= 3 2018-12-04T10:41:31.054Z,1543920091.054 [NAL9602](INFO): Powering up NAL9602 2018-12-04T10:41:43.495Z,1543920103.495 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:42:37.902Z,1543920157.902 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:42:37.902Z,1543920157.902 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-04T10:42:37.902Z,1543920157.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:42:37.904Z,1543920157.904 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:42:37.904Z,1543920157.904 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-04T10:42:37.905Z,1543920157.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:42:37.918Z,1543920157.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:42:37.918Z,1543920157.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:42:38.318Z,1543920158.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:42:38.318Z,1543920158.318 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-04T10:42:38.319Z,1543920158.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:42:38.319Z,1543920158.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-04T10:42:38.706Z,1543920158.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:42:38.707Z,1543920158.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:42:38.707Z,1543920158.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:42:38.707Z,1543920158.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:42:38.708Z,1543920158.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:42:38.708Z,1543920158.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:44:39.135Z,1543920279.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:44:39.135Z,1543920279.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-04T10:44:39.135Z,1543920279.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:44:39.137Z,1543920279.137 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:44:39.137Z,1543920279.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-04T10:44:39.137Z,1543920279.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:44:39.152Z,1543920279.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:44:39.152Z,1543920279.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:44:39.275Z,1543920279.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:44:39.275Z,1543920279.275 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-04T10:44:39.276Z,1543920279.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:44:39.276Z,1543920279.276 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-04T10:44:39.622Z,1543920279.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:44:39.637Z,1543920279.637 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:44:39.637Z,1543920279.637 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:44:39.637Z,1543920279.637 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:44:39.638Z,1543920279.638 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:44:39.639Z,1543920279.639 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:45:49.466Z,1543920349.466 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T10:40:48.3Z 2018-12-04T10:45:49.467Z,1543920349.467 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T10:45:49.467Z,1543920349.467 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T10:45:54.469Z,1543920354.469 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0234.lzma 2018-12-04T10:45:55.241Z,1543920355.241 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0234.lzma.bak 2018-12-04T10:45:55.241Z,1543920355.241 [DataOverHttps](INFO): SBD MOMSN=8964029 2018-12-04T10:46:04.719Z,1543920364.719 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0235.lzma 2018-12-04T10:46:05.517Z,1543920365.517 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0235.lzma.bak 2018-12-04T10:46:05.517Z,1543920365.517 [DataOverHttps](INFO): SBD MOMSN=8964033 2018-12-04T10:46:06.840Z,1543920366.840 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T10:46:06.840Z,1543920366.840 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T10:46:06.841Z,1543920366.841 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T10:46:39.668Z,1543920399.668 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:46:39.668Z,1543920399.668 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-04T10:46:39.668Z,1543920399.668 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:46:39.670Z,1543920399.670 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:46:39.670Z,1543920399.670 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-04T10:46:39.670Z,1543920399.670 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:46:39.684Z,1543920399.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:46:39.684Z,1543920399.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:46:40.087Z,1543920400.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:46:40.087Z,1543920400.087 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-04T10:46:40.088Z,1543920400.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:46:40.088Z,1543920400.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-04T10:46:40.454Z,1543920400.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:46:40.454Z,1543920400.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:46:40.455Z,1543920400.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:46:40.455Z,1543920400.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:46:40.455Z,1543920400.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:46:40.456Z,1543920400.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:46:46.520Z,1543920406.520 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T10:47:17.315Z,1543920437.315 [NAL9602](INFO): Powering down 2018-12-04T10:48:40.515Z,1543920520.515 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:48:40.515Z,1543920520.515 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-04T10:48:40.515Z,1543920520.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:48:40.517Z,1543920520.517 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:48:40.517Z,1543920520.517 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-04T10:48:40.517Z,1543920520.517 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:48:40.531Z,1543920520.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:48:40.531Z,1543920520.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:48:40.934Z,1543920520.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:48:40.934Z,1543920520.934 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-04T10:48:40.935Z,1543920520.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:48:40.935Z,1543920520.935 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-04T10:48:41.322Z,1543920521.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:48:41.322Z,1543920521.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:48:41.323Z,1543920521.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:48:41.323Z,1543920521.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:48:41.323Z,1543920521.323 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:48:41.324Z,1543920521.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:50:41.522Z,1543920641.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:50:41.522Z,1543920641.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-04T10:50:41.542Z,1543920641.542 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:50:41.544Z,1543920641.544 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:50:41.544Z,1543920641.544 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-04T10:50:41.544Z,1543920641.544 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:50:41.559Z,1543920641.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:50:41.560Z,1543920641.560 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:50:41.962Z,1543920641.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:50:41.962Z,1543920641.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-04T10:50:41.963Z,1543920641.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:50:41.963Z,1543920641.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-04T10:50:42.322Z,1543920642.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:50:42.322Z,1543920642.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:50:42.323Z,1543920642.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:50:42.323Z,1543920642.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:50:42.323Z,1543920642.323 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:50:42.324Z,1543920642.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:51:07.074Z,1543920667.074 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T10:51:07.074Z,1543920667.074 [Default:CheckIn:C.Wait] Stopped 2018-12-04T10:51:07.074Z,1543920667.074 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T10:51:07.074Z,1543920667.074 [Default:CheckIn:D] Running Loop=1 2018-12-04T10:51:07.478Z,1543920667.478 [Default:CheckIn:D] Stopped 2018-12-04T10:51:07.478Z,1543920667.478 [Default:CheckIn:E] Running Loop=1 2018-12-04T10:51:07.873Z,1543920667.873 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 816.257617 min 2018-12-04T10:51:07.874Z,1543920667.874 [Default:CheckIn:E] Stopped 2018-12-04T10:51:07.874Z,1543920667.874 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T10:51:07.874Z,1543920667.874 [Default:CheckIn] Stopped 2018-12-04T10:51:07.874Z,1543920667.874 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T10:51:07.874Z,1543920667.874 [Default:CheckIn](INFO): Running loop #80 2018-12-04T10:51:07.874Z,1543920667.874 [Default:CheckIn] Running Loop=80 2018-12-04T10:51:07.874Z,1543920667.874 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T10:51:07.875Z,1543920667.875 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T10:51:08.647Z,1543920668.647 [NAL9602](INFO): Powering up 2018-12-04T10:51:19.847Z,1543920679.847 [NAL9602](INFO): NAL9602 initialized 2018-12-04T10:51:21.101Z,1543920681.101 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T10:51:21.101Z,1543920681.101 [DropWeight] No Fault, FailCount= 1 2018-12-04T10:52:42.326Z,1543920762.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:52:42.326Z,1543920762.326 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-04T10:52:42.326Z,1543920762.326 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:52:42.328Z,1543920762.328 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:52:42.329Z,1543920762.329 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-04T10:52:42.329Z,1543920762.329 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:52:42.342Z,1543920762.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:52:42.342Z,1543920762.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:52:42.759Z,1543920762.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:52:42.759Z,1543920762.759 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-04T10:52:42.759Z,1543920762.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:52:42.759Z,1543920762.759 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-04T10:52:43.142Z,1543920763.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:52:43.143Z,1543920763.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:52:43.143Z,1543920763.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:52:43.143Z,1543920763.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:52:43.144Z,1543920763.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:52:43.144Z,1543920763.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:54:43.223Z,1543920883.223 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:54:43.223Z,1543920883.223 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-04T10:54:43.223Z,1543920883.223 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:54:43.225Z,1543920883.225 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:54:43.225Z,1543920883.225 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-04T10:54:43.225Z,1543920883.225 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:54:43.238Z,1543920883.238 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:54:43.239Z,1543920883.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:54:43.626Z,1543920883.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:54:43.626Z,1543920883.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-04T10:54:43.627Z,1543920883.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:54:43.627Z,1543920883.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-04T10:54:44.014Z,1543920884.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:54:44.015Z,1543920884.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:54:44.015Z,1543920884.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:54:44.016Z,1543920884.016 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:54:44.016Z,1543920884.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:54:44.016Z,1543920884.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:56:09.195Z,1543920969.195 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T10:51:07.9Z 2018-12-04T10:56:09.195Z,1543920969.195 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T10:56:09.195Z,1543920969.195 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T10:56:14.915Z,1543920974.915 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0237.lzma 2018-12-04T10:56:15.709Z,1543920975.709 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0237.lzma.bak 2018-12-04T10:56:15.709Z,1543920975.709 [DataOverHttps](INFO): SBD MOMSN=8964065 2018-12-04T10:56:24.922Z,1543920984.922 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T10:56:24.990Z,1543920984.990 [DataOverHttps](INFO): Sending 289 bytes from file Logs/20181203T211451/Express0238.lzma 2018-12-04T10:56:25.769Z,1543920985.769 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0238.lzma.bak 2018-12-04T10:56:25.769Z,1543920985.769 [DataOverHttps](INFO): SBD MOMSN=8964067 2018-12-04T10:56:27.063Z,1543920987.063 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T10:56:27.063Z,1543920987.063 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T10:56:27.063Z,1543920987.063 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T10:56:44.374Z,1543921004.374 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:56:44.375Z,1543921004.375 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-04T10:56:44.375Z,1543921004.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:56:44.377Z,1543921004.377 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:56:44.377Z,1543921004.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-04T10:56:44.377Z,1543921004.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:56:44.415Z,1543921004.415 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:56:44.415Z,1543921004.415 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:56:44.803Z,1543921004.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:56:44.803Z,1543921004.803 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-04T10:56:44.803Z,1543921004.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:56:44.804Z,1543921004.804 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-04T10:56:45.182Z,1543921005.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:56:45.182Z,1543921005.182 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:56:45.182Z,1543921005.182 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:56:45.183Z,1543921005.183 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:56:45.183Z,1543921005.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:56:45.184Z,1543921005.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:56:55.145Z,1543921015.145 [NAL9602](INFO): Powering down 2018-12-04T10:58:45.513Z,1543921125.513 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:58:45.513Z,1543921125.513 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-04T10:58:45.513Z,1543921125.513 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T10:58:45.515Z,1543921125.515 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T10:58:45.515Z,1543921125.515 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-04T10:58:45.515Z,1543921125.515 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T10:58:45.528Z,1543921125.528 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T10:58:45.528Z,1543921125.528 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T10:58:45.931Z,1543921125.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T10:58:45.931Z,1543921125.931 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-04T10:58:45.932Z,1543921125.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T10:58:45.932Z,1543921125.932 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-04T10:58:46.298Z,1543921126.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T10:58:46.298Z,1543921126.298 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:58:46.299Z,1543921126.299 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T10:58:46.299Z,1543921126.299 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T10:58:46.299Z,1543921126.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T10:58:46.300Z,1543921126.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:00:46.446Z,1543921246.446 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:00:46.446Z,1543921246.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-04T11:00:46.446Z,1543921246.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:00:46.448Z,1543921246.448 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:00:46.449Z,1543921246.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-04T11:00:46.449Z,1543921246.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:00:46.473Z,1543921246.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:00:46.474Z,1543921246.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:00:46.855Z,1543921246.855 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:00:46.855Z,1543921246.855 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-04T11:00:46.856Z,1543921246.856 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:00:46.856Z,1543921246.856 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-04T11:00:47.231Z,1543921247.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:00:47.231Z,1543921247.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:00:47.231Z,1543921247.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:00:47.232Z,1543921247.232 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:00:47.232Z,1543921247.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:00:47.232Z,1543921247.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:01:27.201Z,1543921287.201 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T11:01:27.201Z,1543921287.201 [Default:CheckIn:C.Wait] Stopped 2018-12-04T11:01:27.202Z,1543921287.202 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T11:01:27.202Z,1543921287.202 [Default:CheckIn:D] Running Loop=1 2018-12-04T11:01:27.600Z,1543921287.600 [Default:CheckIn:D] Stopped 2018-12-04T11:01:27.600Z,1543921287.600 [Default:CheckIn:E] Running Loop=1 2018-12-04T11:01:27.978Z,1543921287.978 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 826.592969 min 2018-12-04T11:01:27.979Z,1543921287.979 [Default:CheckIn:E] Stopped 2018-12-04T11:01:27.979Z,1543921287.979 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T11:01:27.979Z,1543921287.979 [Default:CheckIn] Stopped 2018-12-04T11:01:27.979Z,1543921287.979 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T11:01:27.979Z,1543921287.979 [Default:CheckIn](INFO): Running loop #81 2018-12-04T11:01:27.979Z,1543921287.979 [Default:CheckIn] Running Loop=81 2018-12-04T11:01:27.979Z,1543921287.979 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T11:01:27.979Z,1543921287.979 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T11:01:28.753Z,1543921288.753 [NAL9602](INFO): Powering up 2018-12-04T11:01:39.967Z,1543921299.967 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:01:40.760Z,1543921300.760 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T11:01:40.760Z,1543921300.760 [NAL9602] Data Fault, FailCount= 4 2018-12-04T11:01:40.760Z,1543921300.760 [NAL9602](ERROR): Data Fault 2018-12-04T11:01:40.825Z,1543921300.825 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T11:01:41.157Z,1543921301.157 [NAL9602](INFO): Powering down 2018-12-04T11:01:41.986Z,1543921301.986 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T11:01:41.987Z,1543921301.987 [NAL9602] No Fault, FailCount= 4 2018-12-04T11:02:11.536Z,1543921331.536 [NAL9602](INFO): Powering up NAL9602 2018-12-04T11:02:23.080Z,1543921343.080 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:02:47.515Z,1543921367.515 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:02:47.515Z,1543921367.515 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-04T11:02:47.515Z,1543921367.515 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:02:47.517Z,1543921367.517 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:02:47.517Z,1543921367.517 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-04T11:02:47.517Z,1543921367.517 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:02:47.531Z,1543921367.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:02:47.531Z,1543921367.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:02:47.920Z,1543921367.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:02:47.921Z,1543921367.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-04T11:02:47.921Z,1543921367.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:02:47.921Z,1543921367.921 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-04T11:02:48.314Z,1543921368.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:02:48.314Z,1543921368.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:02:48.315Z,1543921368.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:02:48.315Z,1543921368.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:02:48.315Z,1543921368.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:02:48.316Z,1543921368.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:04:48.501Z,1543921488.501 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:04:48.501Z,1543921488.501 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-04T11:04:48.501Z,1543921488.501 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:04:48.504Z,1543921488.504 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:04:48.504Z,1543921488.504 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-04T11:04:48.504Z,1543921488.504 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:04:48.518Z,1543921488.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:04:48.518Z,1543921488.518 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:04:48.915Z,1543921488.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:04:48.915Z,1543921488.915 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-04T11:04:48.916Z,1543921488.916 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:04:48.916Z,1543921488.916 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-04T11:04:49.288Z,1543921489.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:04:49.288Z,1543921489.288 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:04:49.289Z,1543921489.289 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:04:49.289Z,1543921489.289 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:04:49.289Z,1543921489.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:04:49.290Z,1543921489.290 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:06:29.417Z,1543921589.417 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T11:01:27.0Z 2018-12-04T11:06:29.418Z,1543921589.418 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T11:06:29.418Z,1543921589.418 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T11:06:30.298Z,1543921590.298 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0240.lzma 2018-12-04T11:06:30.786Z,1543921590.786 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0240.lzma.bak 2018-12-04T11:06:30.786Z,1543921590.786 [DataOverHttps](INFO): SBD MOMSN=8964093 2018-12-04T11:06:40.049Z,1543921600.049 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0241.lzma 2018-12-04T11:06:40.850Z,1543921600.850 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0241.lzma.bak 2018-12-04T11:06:40.852Z,1543921600.852 [DataOverHttps](INFO): SBD MOMSN=8964095 2018-12-04T11:06:42.294Z,1543921602.294 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T11:06:42.294Z,1543921602.294 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T11:06:42.294Z,1543921602.294 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T11:06:49.550Z,1543921609.550 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:06:49.550Z,1543921609.550 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-04T11:06:49.550Z,1543921609.550 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:06:49.552Z,1543921609.552 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:06:49.552Z,1543921609.552 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-04T11:06:49.552Z,1543921609.552 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:06:49.568Z,1543921609.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:06:49.568Z,1543921609.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:06:49.964Z,1543921609.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:06:49.965Z,1543921609.965 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-04T11:06:49.965Z,1543921609.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:06:49.965Z,1543921609.965 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-04T11:06:50.362Z,1543921610.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:06:50.367Z,1543921610.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:06:50.367Z,1543921610.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:06:50.367Z,1543921610.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:06:50.368Z,1543921610.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:06:50.368Z,1543921610.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:07:25.996Z,1543921645.996 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T11:07:56.401Z,1543921676.401 [NAL9602](INFO): Powering down 2018-12-04T11:08:50.731Z,1543921730.731 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:08:50.731Z,1543921730.731 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-04T11:08:50.731Z,1543921730.731 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:08:50.733Z,1543921730.733 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:08:50.733Z,1543921730.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-04T11:08:50.733Z,1543921730.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:08:50.775Z,1543921730.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:08:50.775Z,1543921730.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:08:51.175Z,1543921731.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:08:51.175Z,1543921731.175 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-04T11:08:51.176Z,1543921731.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:08:51.176Z,1543921731.176 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-04T11:08:51.526Z,1543921731.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:08:51.526Z,1543921731.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:08:51.527Z,1543921731.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:08:51.527Z,1543921731.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:08:51.527Z,1543921731.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:08:51.528Z,1543921731.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:10:52.426Z,1543921852.426 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:10:52.426Z,1543921852.426 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-04T11:10:52.426Z,1543921852.426 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:10:52.428Z,1543921852.428 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:10:52.428Z,1543921852.428 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-04T11:10:52.428Z,1543921852.428 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:10:52.442Z,1543921852.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:10:52.443Z,1543921852.443 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:10:52.573Z,1543921852.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:10:52.573Z,1543921852.573 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-04T11:10:52.573Z,1543921852.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:10:52.573Z,1543921852.573 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-04T11:10:52.880Z,1543921852.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:10:52.880Z,1543921852.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:10:52.881Z,1543921852.881 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:10:52.881Z,1543921852.881 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:10:52.882Z,1543921852.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:10:52.882Z,1543921852.882 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:11:42.442Z,1543921902.442 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T11:11:42.442Z,1543921902.442 [Default:CheckIn:C.Wait] Stopped 2018-12-04T11:11:42.442Z,1543921902.442 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T11:11:42.443Z,1543921902.443 [Default:CheckIn:D] Running Loop=1 2018-12-04T11:11:42.847Z,1543921902.847 [Default:CheckIn:D] Stopped 2018-12-04T11:11:42.847Z,1543921902.847 [Default:CheckIn:E] Running Loop=1 2018-12-04T11:11:43.246Z,1543921903.246 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 836.847070 min 2018-12-04T11:11:43.246Z,1543921903.246 [Default:CheckIn:E] Stopped 2018-12-04T11:11:43.246Z,1543921903.246 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T11:11:43.246Z,1543921903.246 [Default:CheckIn] Stopped 2018-12-04T11:11:43.247Z,1543921903.247 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T11:11:43.247Z,1543921903.247 [Default:CheckIn](INFO): Running loop #82 2018-12-04T11:11:43.247Z,1543921903.247 [Default:CheckIn] Running Loop=82 2018-12-04T11:11:43.247Z,1543921903.247 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T11:11:43.247Z,1543921903.247 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T11:11:44.009Z,1543921904.009 [NAL9602](INFO): Powering up 2018-12-04T11:11:54.812Z,1543921914.812 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:12:26.517Z,1543921946.517 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T11:12:26.590Z,1543921946.590 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T11:12:26.590Z,1543921946.590 [NAL9602] Data Fault, FailCount= 5 2018-12-04T11:12:26.590Z,1543921946.590 [NAL9602](ERROR): Data Fault 2018-12-04T11:12:26.653Z,1543921946.653 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T11:12:26.653Z,1543921946.653 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T11:12:26.916Z,1543921946.916 [NAL9602](INFO): Powering down 2018-12-04T11:12:26.976Z,1543921946.976 [CBIT](INFO): Critical error at 20181204T111226 2018-12-04T11:12:52.904Z,1543921972.904 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:12:52.904Z,1543921972.904 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-04T11:12:52.904Z,1543921972.904 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:12:52.906Z,1543921972.906 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:12:52.906Z,1543921972.906 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-04T11:12:52.906Z,1543921972.906 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:12:52.927Z,1543921972.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:12:52.927Z,1543921972.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:12:53.337Z,1543921973.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:12:53.337Z,1543921973.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-04T11:12:53.337Z,1543921973.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:12:53.337Z,1543921973.337 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-04T11:12:53.721Z,1543921973.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:12:53.721Z,1543921973.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:12:53.722Z,1543921973.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:12:53.722Z,1543921973.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:12:53.723Z,1543921973.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:12:53.723Z,1543921973.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:14:26.697Z,1543922066.697 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T11:14:26.697Z,1543922066.697 [NAL9602] No Fault, FailCount= 5 2018-12-04T11:14:27.059Z,1543922067.059 [NAL9602](INFO): Powering up NAL9602 2018-12-04T11:14:38.265Z,1543922078.265 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:14:39.060Z,1543922079.060 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T11:14:39.060Z,1543922079.060 [NAL9602] Data Fault, FailCount= 1 2018-12-04T11:14:39.060Z,1543922079.060 [NAL9602](ERROR): Data Fault 2018-12-04T11:14:39.098Z,1543922079.098 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T11:14:39.456Z,1543922079.456 [NAL9602](INFO): Powering down 2018-12-04T11:14:40.299Z,1543922080.299 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T11:14:40.299Z,1543922080.299 [NAL9602] No Fault, FailCount= 1 2018-12-04T11:14:53.878Z,1543922093.878 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:14:53.878Z,1543922093.878 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-04T11:14:53.879Z,1543922093.879 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:14:53.881Z,1543922093.881 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:14:53.881Z,1543922093.881 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-04T11:14:53.881Z,1543922093.881 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:14:53.894Z,1543922093.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:14:53.894Z,1543922093.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:14:54.291Z,1543922094.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:14:54.291Z,1543922094.291 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-04T11:14:54.292Z,1543922094.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:14:54.292Z,1543922094.292 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-04T11:14:54.686Z,1543922094.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:14:54.686Z,1543922094.686 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:14:54.687Z,1543922094.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:14:54.687Z,1543922094.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:14:54.687Z,1543922094.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:14:54.688Z,1543922094.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:15:09.805Z,1543922109.806 [NAL9602](INFO): Powering up NAL9602 2018-12-04T11:15:20.608Z,1543922120.608 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:16:44.685Z,1543922204.685 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T11:11:43.2Z 2018-12-04T11:16:44.685Z,1543922204.685 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T11:16:44.685Z,1543922204.685 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T11:16:49.609Z,1543922209.609 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0243.lzma 2018-12-04T11:16:50.409Z,1543922210.409 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0243.lzma.bak 2018-12-04T11:16:50.409Z,1543922210.409 [DataOverHttps](INFO): SBD MOMSN=8964124 2018-12-04T11:16:54.892Z,1543922214.892 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:16:54.893Z,1543922214.893 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-04T11:16:54.893Z,1543922214.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:16:54.895Z,1543922214.895 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:16:54.895Z,1543922214.895 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-04T11:16:54.895Z,1543922214.895 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:16:54.909Z,1543922214.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:16:54.909Z,1543922214.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:16:55.045Z,1543922215.045 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:16:55.045Z,1543922215.045 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-04T11:16:55.046Z,1543922215.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:16:55.046Z,1543922215.046 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-04T11:16:55.358Z,1543922215.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:16:55.358Z,1543922215.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:16:55.359Z,1543922215.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:16:55.359Z,1543922215.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:16:55.359Z,1543922215.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:16:55.360Z,1543922215.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:16:59.785Z,1543922219.785 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T11:16:59.866Z,1543922219.866 [DataOverHttps](INFO): Sending 346 bytes from file Logs/20181203T211451/Express0244.lzma 2018-12-04T11:17:00.643Z,1543922220.643 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0244.lzma.bak 2018-12-04T11:17:00.645Z,1543922220.645 [DataOverHttps](INFO): SBD MOMSN=8964127 2018-12-04T11:17:02.024Z,1543922222.024 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T11:17:02.025Z,1543922222.025 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T11:17:02.025Z,1543922222.025 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T11:17:30.036Z,1543922250.036 [NAL9602](INFO): Powering down 2018-12-04T11:18:55.703Z,1543922335.703 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:18:55.703Z,1543922335.703 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-04T11:18:55.703Z,1543922335.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:18:55.705Z,1543922335.705 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:18:55.705Z,1543922335.705 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-04T11:18:55.705Z,1543922335.705 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:18:55.718Z,1543922335.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:18:55.719Z,1543922335.719 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:18:56.122Z,1543922336.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:18:56.122Z,1543922336.122 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-04T11:18:56.122Z,1543922336.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:18:56.122Z,1543922336.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-04T11:18:56.501Z,1543922336.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:18:56.501Z,1543922336.501 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:18:56.502Z,1543922336.502 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:18:56.502Z,1543922336.502 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:18:56.503Z,1543922336.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:18:56.503Z,1543922336.503 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:20:56.525Z,1543922456.525 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:20:56.525Z,1543922456.525 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-04T11:20:56.525Z,1543922456.525 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:20:56.527Z,1543922456.527 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:20:56.527Z,1543922456.527 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-04T11:20:56.528Z,1543922456.528 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:20:56.541Z,1543922456.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:20:56.542Z,1543922456.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:20:56.940Z,1543922456.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:20:56.940Z,1543922456.940 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-04T11:20:56.941Z,1543922456.941 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:20:56.941Z,1543922456.941 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-04T11:20:57.334Z,1543922457.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:20:57.334Z,1543922457.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:20:57.335Z,1543922457.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:20:57.335Z,1543922457.335 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:20:57.335Z,1543922457.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:20:57.336Z,1543922457.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:21:22.451Z,1543922482.451 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T11:21:22.451Z,1543922482.451 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T11:21:22.451Z,1543922482.451 [DropWeight](ERROR): Hardware Fault 2018-12-04T11:21:22.524Z,1543922482.524 [CBIT](INFO): Critical error at 20181204T112122 2018-12-04T11:21:22.526Z,1543922482.526 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T11:21:22.527Z,1543922482.527 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T11:21:22.906Z,1543922482.906 [CBIT](INFO): Critical error at 20181204T112122 2018-12-04T11:22:02.509Z,1543922522.509 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T11:22:02.509Z,1543922522.509 [Default:CheckIn:C.Wait] Stopped 2018-12-04T11:22:02.509Z,1543922522.509 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T11:22:02.509Z,1543922522.509 [Default:CheckIn:D] Running Loop=1 2018-12-04T11:22:02.912Z,1543922522.912 [Default:CheckIn:D] Stopped 2018-12-04T11:22:02.913Z,1543922522.913 [Default:CheckIn:E] Running Loop=1 2018-12-04T11:22:03.310Z,1543922523.310 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 847.181510 min 2018-12-04T11:22:03.310Z,1543922523.310 [Default:CheckIn:E] Stopped 2018-12-04T11:22:03.311Z,1543922523.311 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T11:22:03.311Z,1543922523.311 [Default:CheckIn] Stopped 2018-12-04T11:22:03.311Z,1543922523.311 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T11:22:03.311Z,1543922523.311 [Default:CheckIn](INFO): Running loop #83 2018-12-04T11:22:03.311Z,1543922523.311 [Default:CheckIn] Running Loop=83 2018-12-04T11:22:03.311Z,1543922523.311 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T11:22:03.311Z,1543922523.311 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T11:22:04.086Z,1543922524.086 [NAL9602](INFO): Powering up 2018-12-04T11:22:15.290Z,1543922535.290 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:22:47.273Z,1543922567.273 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T11:22:47.346Z,1543922567.346 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T11:22:47.346Z,1543922567.346 [NAL9602] Data Fault, FailCount= 2 2018-12-04T11:22:47.346Z,1543922567.346 [NAL9602](ERROR): Data Fault 2018-12-04T11:22:47.417Z,1543922567.417 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T11:22:47.676Z,1543922567.676 [NAL9602](INFO): Powering down 2018-12-04T11:22:48.542Z,1543922568.542 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T11:22:48.542Z,1543922568.542 [NAL9602] No Fault, FailCount= 2 2018-12-04T11:22:57.732Z,1543922577.732 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:22:57.732Z,1543922577.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-04T11:22:57.732Z,1543922577.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:22:57.734Z,1543922577.734 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:22:57.734Z,1543922577.734 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-04T11:22:57.734Z,1543922577.734 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:22:57.747Z,1543922577.747 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:22:57.748Z,1543922577.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:22:57.888Z,1543922577.888 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:22:57.888Z,1543922577.888 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-04T11:22:57.888Z,1543922577.888 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:22:57.888Z,1543922577.888 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-04T11:22:58.184Z,1543922578.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:22:58.185Z,1543922578.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:22:58.185Z,1543922578.185 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:22:58.186Z,1543922578.186 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:22:58.186Z,1543922578.186 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:22:58.187Z,1543922578.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:23:17.767Z,1543922597.767 [NAL9602](INFO): Powering up NAL9602 2018-12-04T11:23:28.963Z,1543922608.963 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:24:58.274Z,1543922698.274 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:24:58.274Z,1543922698.274 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-04T11:24:58.274Z,1543922698.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:24:58.276Z,1543922698.276 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:24:58.277Z,1543922698.277 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-04T11:24:58.277Z,1543922698.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:24:58.290Z,1543922698.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:24:58.290Z,1543922698.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:24:58.686Z,1543922698.686 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:24:58.686Z,1543922698.686 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-04T11:24:58.687Z,1543922698.687 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:24:58.687Z,1543922698.687 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-04T11:24:59.070Z,1543922699.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:24:59.075Z,1543922699.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:24:59.075Z,1543922699.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:24:59.075Z,1543922699.075 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:24:59.076Z,1543922699.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:24:59.076Z,1543922699.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:26:59.140Z,1543922819.140 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:26:59.140Z,1543922819.140 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-04T11:26:59.140Z,1543922819.140 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:26:59.143Z,1543922819.143 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:26:59.144Z,1543922819.144 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-04T11:26:59.144Z,1543922819.144 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:26:59.159Z,1543922819.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:26:59.160Z,1543922819.160 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:26:59.554Z,1543922819.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:26:59.554Z,1543922819.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-04T11:26:59.559Z,1543922819.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:26:59.559Z,1543922819.559 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-04T11:26:59.942Z,1543922819.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:26:59.942Z,1543922819.942 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:26:59.942Z,1543922819.942 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:26:59.943Z,1543922819.943 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:26:59.943Z,1543922819.943 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:26:59.944Z,1543922819.944 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:27:04.254Z,1543922824.254 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T11:22:03.3Z 2018-12-04T11:27:04.254Z,1543922824.254 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T11:27:04.255Z,1543922824.255 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T11:27:10.124Z,1543922830.124 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0246.lzma 2018-12-04T11:27:10.913Z,1543922830.913 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0246.lzma.bak 2018-12-04T11:27:10.913Z,1543922830.913 [DataOverHttps](INFO): SBD MOMSN=8964159 2018-12-04T11:27:20.234Z,1543922840.234 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T11:27:20.281Z,1543922840.281 [DataOverHttps](INFO): Sending 334 bytes from file Logs/20181203T211451/Express0247.lzma 2018-12-04T11:27:21.081Z,1543922841.081 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0247.lzma.bak 2018-12-04T11:27:21.081Z,1543922841.081 [DataOverHttps](INFO): SBD MOMSN=8964163 2018-12-04T11:27:22.414Z,1543922842.414 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T11:27:22.414Z,1543922842.414 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T11:27:22.414Z,1543922842.414 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T11:27:50.543Z,1543922870.543 [NAL9602](INFO): Powering down 2018-12-04T11:29:00.250Z,1543922940.250 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:29:00.251Z,1543922940.251 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-04T11:29:00.251Z,1543922940.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:29:00.253Z,1543922940.253 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:29:00.253Z,1543922940.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-04T11:29:00.253Z,1543922940.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:29:00.266Z,1543922940.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:29:00.266Z,1543922940.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:29:00.665Z,1543922940.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:29:00.665Z,1543922940.665 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-04T11:29:00.666Z,1543922940.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:29:00.666Z,1543922940.666 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-04T11:29:01.062Z,1543922941.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:29:01.063Z,1543922941.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:29:01.063Z,1543922941.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:29:01.063Z,1543922941.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:29:01.064Z,1543922941.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:29:01.064Z,1543922941.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:31:01.159Z,1543923061.159 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:31:01.159Z,1543923061.159 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-04T11:31:01.160Z,1543923061.160 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:31:01.162Z,1543923061.162 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:31:01.162Z,1543923061.162 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-04T11:31:01.162Z,1543923061.162 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:31:01.175Z,1543923061.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:31:01.175Z,1543923061.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:31:01.578Z,1543923061.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:31:01.578Z,1543923061.578 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-04T11:31:01.578Z,1543923061.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:31:01.579Z,1543923061.579 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-04T11:31:01.962Z,1543923061.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:31:01.962Z,1543923061.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:31:01.963Z,1543923061.963 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:31:01.963Z,1543923061.963 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:31:01.963Z,1543923061.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:31:01.964Z,1543923061.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:32:22.801Z,1543923142.801 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T11:32:22.802Z,1543923142.802 [Default:CheckIn:C.Wait] Stopped 2018-12-04T11:32:22.802Z,1543923142.802 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T11:32:22.802Z,1543923142.802 [Default:CheckIn:D] Running Loop=1 2018-12-04T11:32:23.203Z,1543923143.203 [Default:CheckIn:D] Stopped 2018-12-04T11:32:23.203Z,1543923143.203 [Default:CheckIn:E] Running Loop=1 2018-12-04T11:32:23.610Z,1543923143.610 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 857.519661 min 2018-12-04T11:32:23.610Z,1543923143.610 [Default:CheckIn:E] Stopped 2018-12-04T11:32:23.610Z,1543923143.610 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T11:32:23.611Z,1543923143.611 [Default:CheckIn] Stopped 2018-12-04T11:32:23.611Z,1543923143.611 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T11:32:23.611Z,1543923143.611 [Default:CheckIn](INFO): Running loop #84 2018-12-04T11:32:23.611Z,1543923143.611 [Default:CheckIn] Running Loop=84 2018-12-04T11:32:23.611Z,1543923143.611 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T11:32:23.611Z,1543923143.611 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T11:32:24.375Z,1543923144.375 [NAL9602](INFO): Powering up 2018-12-04T11:32:35.576Z,1543923155.576 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:32:36.380Z,1543923156.380 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T11:32:36.381Z,1543923156.381 [NAL9602] Data Fault, FailCount= 3 2018-12-04T11:32:36.381Z,1543923156.381 [NAL9602](ERROR): Data Fault 2018-12-04T11:32:36.448Z,1543923156.448 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T11:32:36.779Z,1543923156.779 [NAL9602](INFO): Powering down 2018-12-04T11:32:37.633Z,1543923157.633 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T11:32:37.633Z,1543923157.634 [NAL9602] No Fault, FailCount= 3 2018-12-04T11:33:01.972Z,1543923181.972 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:33:01.972Z,1543923181.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-04T11:33:01.972Z,1543923181.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:33:01.974Z,1543923181.974 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:33:01.974Z,1543923181.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-04T11:33:01.974Z,1543923181.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:33:01.988Z,1543923181.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:33:01.988Z,1543923181.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:33:02.394Z,1543923182.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:33:02.394Z,1543923182.394 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-04T11:33:02.395Z,1543923182.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:33:02.395Z,1543923182.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-04T11:33:02.778Z,1543923182.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:33:02.778Z,1543923182.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:33:02.779Z,1543923182.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:33:02.779Z,1543923182.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:33:02.779Z,1543923182.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:33:02.780Z,1543923182.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:33:07.147Z,1543923187.147 [NAL9602](INFO): Powering up NAL9602 2018-12-04T11:33:18.703Z,1543923198.703 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:35:04.035Z,1543923304.035 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:35:04.035Z,1543923304.035 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-04T11:35:04.035Z,1543923304.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:35:04.037Z,1543923304.037 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:35:04.037Z,1543923304.037 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-04T11:35:04.037Z,1543923304.037 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:35:04.051Z,1543923304.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:35:04.051Z,1543923304.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:35:04.179Z,1543923304.179 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:35:04.179Z,1543923304.179 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-04T11:35:04.180Z,1543923304.180 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:35:04.180Z,1543923304.180 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-04T11:35:04.491Z,1543923304.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:35:04.492Z,1543923304.492 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:35:04.492Z,1543923304.492 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:35:04.493Z,1543923304.493 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:35:04.493Z,1543923304.493 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:35:04.493Z,1543923304.493 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:36:22.464Z,1543923382.464 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T11:36:22.464Z,1543923382.464 [DropWeight] No Fault, FailCount= 1 2018-12-04T11:37:04.819Z,1543923424.819 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:37:04.819Z,1543923424.819 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-04T11:37:04.819Z,1543923424.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:37:04.821Z,1543923424.821 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:37:04.821Z,1543923424.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-04T11:37:04.821Z,1543923424.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:37:04.835Z,1543923424.835 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:37:04.835Z,1543923424.835 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:37:05.223Z,1543923425.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:37:05.224Z,1543923425.224 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-04T11:37:05.224Z,1543923425.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:37:05.224Z,1543923425.224 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-04T11:37:05.606Z,1543923425.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:37:05.606Z,1543923425.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:37:05.607Z,1543923425.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:37:05.607Z,1543923425.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:37:05.607Z,1543923425.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:37:05.608Z,1543923425.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:37:24.735Z,1543923444.735 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T11:32:23.6Z 2018-12-04T11:37:24.735Z,1543923444.735 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T11:37:24.735Z,1543923444.735 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T11:37:29.947Z,1543923449.947 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0249.lzma 2018-12-04T11:37:30.743Z,1543923450.743 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0249.lzma.bak 2018-12-04T11:37:30.743Z,1543923450.743 [DataOverHttps](INFO): SBD MOMSN=8964200 2018-12-04T11:37:41.387Z,1543923461.387 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0250.lzma 2018-12-04T11:37:42.185Z,1543923462.185 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0250.lzma.bak 2018-12-04T11:37:42.185Z,1543923462.185 [DataOverHttps](INFO): SBD MOMSN=8964202 2018-12-04T11:37:43.514Z,1543923463.514 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T11:37:43.514Z,1543923463.514 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T11:37:43.514Z,1543923463.514 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T11:38:22.347Z,1543923502.347 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T11:38:52.836Z,1543923532.836 [NAL9602](INFO): Powering down 2018-12-04T11:39:05.642Z,1543923545.642 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:39:05.642Z,1543923545.642 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-04T11:39:05.642Z,1543923545.642 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:39:05.644Z,1543923545.644 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:39:05.644Z,1543923545.644 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-04T11:39:05.645Z,1543923545.645 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:39:05.658Z,1543923545.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:39:05.658Z,1543923545.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:39:06.052Z,1543923546.052 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:39:06.052Z,1543923546.052 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-04T11:39:06.052Z,1543923546.052 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:39:06.052Z,1543923546.052 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-04T11:39:06.442Z,1543923546.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:39:06.443Z,1543923546.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:39:06.443Z,1543923546.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:39:06.443Z,1543923546.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:39:06.444Z,1543923546.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:39:06.444Z,1543923546.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:41:06.622Z,1543923666.622 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:41:06.622Z,1543923666.622 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-04T11:41:06.622Z,1543923666.622 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:41:06.624Z,1543923666.624 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:41:06.624Z,1543923666.624 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-04T11:41:06.625Z,1543923666.625 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:41:06.639Z,1543923666.639 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:41:06.639Z,1543923666.639 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:41:07.028Z,1543923667.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:41:07.028Z,1543923667.028 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-04T11:41:07.029Z,1543923667.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:41:07.029Z,1543923667.029 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-04T11:41:07.422Z,1543923667.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:41:07.422Z,1543923667.422 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:41:07.423Z,1543923667.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:41:07.423Z,1543923667.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:41:07.423Z,1543923667.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:41:07.424Z,1543923667.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:42:43.778Z,1543923763.778 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T11:42:43.778Z,1543923763.778 [Default:CheckIn:C.Wait] Stopped 2018-12-04T11:42:43.778Z,1543923763.778 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T11:42:43.778Z,1543923763.778 [Default:CheckIn:D] Running Loop=1 2018-12-04T11:42:44.180Z,1543923764.180 [Default:CheckIn:D] Stopped 2018-12-04T11:42:44.180Z,1543923764.180 [Default:CheckIn:E] Running Loop=1 2018-12-04T11:42:44.586Z,1543923764.586 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 867.869336 min 2018-12-04T11:42:44.586Z,1543923764.586 [Default:CheckIn:E] Stopped 2018-12-04T11:42:44.586Z,1543923764.586 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T11:42:44.587Z,1543923764.587 [Default:CheckIn] Stopped 2018-12-04T11:42:44.587Z,1543923764.587 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T11:42:44.587Z,1543923764.587 [Default:CheckIn](INFO): Running loop #85 2018-12-04T11:42:44.587Z,1543923764.587 [Default:CheckIn] Running Loop=85 2018-12-04T11:42:44.587Z,1543923764.587 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T11:42:44.587Z,1543923764.587 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T11:42:45.347Z,1543923765.347 [NAL9602](INFO): Powering up 2018-12-04T11:42:56.552Z,1543923776.552 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:43:07.518Z,1543923787.518 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:43:07.518Z,1543923787.518 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-04T11:43:07.518Z,1543923787.518 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:43:07.520Z,1543923787.520 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:43:07.521Z,1543923787.521 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-04T11:43:07.521Z,1543923787.521 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:43:07.534Z,1543923787.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:43:07.534Z,1543923787.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:43:07.929Z,1543923787.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:43:07.929Z,1543923787.929 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-04T11:43:07.929Z,1543923787.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:43:07.929Z,1543923787.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-04T11:43:08.318Z,1543923788.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:43:08.318Z,1543923788.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:43:08.319Z,1543923788.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:43:08.319Z,1543923788.319 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:43:08.319Z,1543923788.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:43:08.320Z,1543923788.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:43:28.288Z,1543923808.288 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T11:43:28.370Z,1543923808.370 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T11:43:28.370Z,1543923808.370 [NAL9602] Data Fault, FailCount= 4 2018-12-04T11:43:28.370Z,1543923808.370 [NAL9602](ERROR): Data Fault 2018-12-04T11:43:28.434Z,1543923808.434 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T11:43:28.692Z,1543923808.692 [NAL9602](INFO): Powering down 2018-12-04T11:43:29.556Z,1543923809.556 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T11:43:29.556Z,1543923809.556 [NAL9602] No Fault, FailCount= 4 2018-12-04T11:43:58.768Z,1543923838.768 [NAL9602](INFO): Powering up NAL9602 2018-12-04T11:44:09.976Z,1543923849.976 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:44:10.763Z,1543923850.763 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T11:44:10.764Z,1543923850.764 [NAL9602] Data Fault, FailCount= 5 2018-12-04T11:44:10.764Z,1543923850.764 [NAL9602](ERROR): Data Fault 2018-12-04T11:44:10.836Z,1543923850.836 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T11:44:10.836Z,1543923850.836 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T11:44:11.164Z,1543923851.164 [NAL9602](INFO): Powering down 2018-12-04T11:44:11.227Z,1543923851.227 [CBIT](INFO): Critical error at 20181204T114410 2018-12-04T11:45:08.470Z,1543923908.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:45:08.470Z,1543923908.470 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-04T11:45:08.471Z,1543923908.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:45:08.473Z,1543923908.473 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:45:08.473Z,1543923908.473 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-04T11:45:08.473Z,1543923908.473 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:45:08.497Z,1543923908.497 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:45:08.497Z,1543923908.497 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:45:08.886Z,1543923908.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:45:08.886Z,1543923908.886 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-04T11:45:08.887Z,1543923908.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:45:08.887Z,1543923908.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-04T11:45:09.266Z,1543923909.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:45:09.266Z,1543923909.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:45:09.266Z,1543923909.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:45:09.267Z,1543923909.267 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:45:09.267Z,1543923909.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:45:09.268Z,1543923909.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:46:10.805Z,1543923970.805 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T11:46:10.805Z,1543923970.805 [NAL9602] No Fault, FailCount= 5 2018-12-04T11:46:11.169Z,1543923971.169 [NAL9602](INFO): Powering up NAL9602 2018-12-04T11:46:22.391Z,1543923982.391 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:47:10.922Z,1543924030.922 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:47:10.923Z,1543924030.923 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-04T11:47:10.923Z,1543924030.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:47:10.925Z,1543924030.925 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:47:10.925Z,1543924030.925 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-04T11:47:10.925Z,1543924030.925 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:47:10.963Z,1543924030.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:47:10.963Z,1543924030.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:47:11.071Z,1543924031.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:47:11.071Z,1543924031.071 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-04T11:47:11.072Z,1543924031.072 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:47:11.072Z,1543924031.072 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-04T11:47:11.430Z,1543924031.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:47:11.430Z,1543924031.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:47:11.431Z,1543924031.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:47:11.431Z,1543924031.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:47:11.431Z,1543924031.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:47:11.432Z,1543924031.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:47:46.184Z,1543924066.184 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T11:42:44.6Z 2018-12-04T11:47:46.184Z,1543924066.184 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T11:47:46.184Z,1543924066.184 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T11:47:51.231Z,1543924071.231 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0252.lzma 2018-12-04T11:47:52.029Z,1543924072.029 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0252.lzma.bak 2018-12-04T11:47:52.030Z,1543924072.030 [DataOverHttps](INFO): SBD MOMSN=8964231 2018-12-04T11:48:01.719Z,1543924081.719 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T11:48:02.203Z,1543924082.203 [DataOverHttps](INFO): Sending 342 bytes from file Logs/20181203T211451/Express0253.lzma 2018-12-04T11:48:02.993Z,1543924082.993 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0253.lzma.bak 2018-12-04T11:48:02.993Z,1543924082.993 [DataOverHttps](INFO): SBD MOMSN=8964234 2018-12-04T11:48:04.420Z,1543924084.420 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T11:48:04.420Z,1543924084.420 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T11:48:04.420Z,1543924084.420 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T11:48:18.833Z,1543924098.833 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T11:48:32.005Z,1543924112.005 [NAL9602](INFO): Powering down 2018-12-04T11:49:11.573Z,1543924151.573 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:49:11.573Z,1543924151.573 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-04T11:49:11.573Z,1543924151.573 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:49:11.575Z,1543924151.575 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:49:11.575Z,1543924151.575 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-04T11:49:11.575Z,1543924151.575 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:49:11.621Z,1543924151.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:49:11.621Z,1543924151.621 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:49:11.984Z,1543924151.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:49:11.984Z,1543924151.984 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-04T11:49:11.985Z,1543924151.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:49:11.985Z,1543924151.985 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-04T11:49:12.378Z,1543924152.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:49:12.379Z,1543924152.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:49:12.379Z,1543924152.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:49:12.380Z,1543924152.380 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:49:12.380Z,1543924152.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:49:12.381Z,1543924152.381 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:51:12.502Z,1543924272.502 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:51:12.502Z,1543924272.502 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-04T11:51:12.502Z,1543924272.502 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:51:12.504Z,1543924272.504 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:51:12.504Z,1543924272.504 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-04T11:51:12.505Z,1543924272.505 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:51:12.519Z,1543924272.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:51:12.519Z,1543924272.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:51:12.907Z,1543924272.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:51:12.907Z,1543924272.907 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-04T11:51:12.908Z,1543924272.908 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:51:12.908Z,1543924272.908 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-04T11:51:13.296Z,1543924273.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:51:13.297Z,1543924273.297 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:51:13.297Z,1543924273.297 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:51:13.297Z,1543924273.297 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:51:13.298Z,1543924273.298 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:51:13.298Z,1543924273.298 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:53:04.586Z,1543924384.586 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T11:53:04.586Z,1543924384.586 [Default:CheckIn:C.Wait] Stopped 2018-12-04T11:53:04.586Z,1543924384.586 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T11:53:04.586Z,1543924384.586 [Default:CheckIn:D] Running Loop=1 2018-12-04T11:53:04.987Z,1543924384.987 [Default:CheckIn:D] Stopped 2018-12-04T11:53:04.987Z,1543924384.987 [Default:CheckIn:E] Running Loop=1 2018-12-04T11:53:05.394Z,1543924385.394 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 878.216081 min 2018-12-04T11:53:05.394Z,1543924385.394 [Default:CheckIn:E] Stopped 2018-12-04T11:53:05.394Z,1543924385.394 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T11:53:05.395Z,1543924385.395 [Default:CheckIn] Stopped 2018-12-04T11:53:05.395Z,1543924385.395 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T11:53:05.395Z,1543924385.395 [Default:CheckIn](INFO): Running loop #86 2018-12-04T11:53:05.395Z,1543924385.395 [Default:CheckIn] Running Loop=86 2018-12-04T11:53:05.395Z,1543924385.395 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T11:53:05.395Z,1543924385.395 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T11:53:06.157Z,1543924386.157 [NAL9602](INFO): Powering up 2018-12-04T11:53:13.390Z,1543924393.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:53:13.390Z,1543924393.390 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-04T11:53:13.390Z,1543924393.390 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:53:13.392Z,1543924393.392 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:53:13.393Z,1543924393.393 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-04T11:53:13.393Z,1543924393.393 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:53:13.406Z,1543924393.406 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:53:13.406Z,1543924393.406 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:53:13.805Z,1543924393.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:53:13.805Z,1543924393.805 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-04T11:53:13.806Z,1543924393.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:53:13.806Z,1543924393.806 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-04T11:53:14.176Z,1543924394.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:53:14.176Z,1543924394.176 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:53:14.177Z,1543924394.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:53:14.177Z,1543924394.177 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:53:14.178Z,1543924394.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:53:14.178Z,1543924394.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:53:16.964Z,1543924396.964 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:53:48.578Z,1543924428.578 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T11:53:48.654Z,1543924428.654 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T11:53:48.654Z,1543924428.654 [NAL9602] Data Fault, FailCount= 1 2018-12-04T11:53:48.654Z,1543924428.654 [NAL9602](ERROR): Data Fault 2018-12-04T11:53:48.729Z,1543924428.729 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T11:53:48.980Z,1543924428.980 [NAL9602](INFO): Powering down 2018-12-04T11:53:49.817Z,1543924429.817 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T11:53:49.817Z,1543924429.817 [NAL9602] No Fault, FailCount= 1 2018-12-04T11:54:19.324Z,1543924459.324 [NAL9602](INFO): Powering up NAL9602 2018-12-04T11:54:30.524Z,1543924470.524 [NAL9602](INFO): NAL9602 initialized 2018-12-04T11:55:14.263Z,1543924514.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:55:14.264Z,1543924514.264 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-04T11:55:14.264Z,1543924514.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:55:14.266Z,1543924514.266 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:55:14.266Z,1543924514.266 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-04T11:55:14.266Z,1543924514.266 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:55:14.280Z,1543924514.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:55:14.280Z,1543924514.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:55:14.678Z,1543924514.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:55:14.678Z,1543924514.678 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-04T11:55:14.678Z,1543924514.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:55:14.678Z,1543924514.678 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-04T11:55:15.054Z,1543924515.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:55:15.069Z,1543924515.069 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:55:15.069Z,1543924515.069 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:55:15.070Z,1543924515.070 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:55:15.070Z,1543924515.070 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:55:15.071Z,1543924515.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:57:15.114Z,1543924635.114 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:57:15.114Z,1543924635.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-04T11:57:15.114Z,1543924635.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:57:15.116Z,1543924635.116 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:57:15.116Z,1543924635.116 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-04T11:57:15.117Z,1543924635.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:57:15.187Z,1543924635.187 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:57:15.188Z,1543924635.188 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:57:15.520Z,1543924635.520 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:57:15.520Z,1543924635.520 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-04T11:57:15.521Z,1543924635.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:57:15.521Z,1543924635.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-04T11:57:15.914Z,1543924635.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:57:15.914Z,1543924635.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:57:15.915Z,1543924635.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:57:15.915Z,1543924635.915 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:57:15.915Z,1543924635.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:57:15.916Z,1543924635.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:58:06.580Z,1543924686.580 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T11:53:05.4Z 2018-12-04T11:58:06.581Z,1543924686.581 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T11:58:06.581Z,1543924686.581 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T11:58:07.471Z,1543924687.471 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0255.lzma 2018-12-04T11:58:07.961Z,1543924687.961 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0255.lzma.bak 2018-12-04T11:58:07.961Z,1543924687.961 [DataOverHttps](INFO): SBD MOMSN=8964267 2018-12-04T11:58:17.355Z,1543924697.355 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20181203T211451/Express0256.lzma 2018-12-04T11:58:18.153Z,1543924698.153 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0256.lzma.bak 2018-12-04T11:58:18.153Z,1543924698.153 [DataOverHttps](INFO): SBD MOMSN=8964269 2018-12-04T11:58:19.484Z,1543924699.484 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T11:58:19.484Z,1543924699.484 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T11:58:19.484Z,1543924699.484 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T11:58:22.607Z,1543924702.607 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T11:58:53.061Z,1543924733.061 [NAL9602](INFO): Powering down 2018-12-04T11:59:16.088Z,1543924756.088 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:59:16.088Z,1543924756.088 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-04T11:59:16.088Z,1543924756.088 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T11:59:16.090Z,1543924756.090 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T11:59:16.090Z,1543924756.090 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-04T11:59:16.090Z,1543924756.090 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T11:59:16.103Z,1543924756.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T11:59:16.104Z,1543924756.104 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T11:59:16.506Z,1543924756.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T11:59:16.506Z,1543924756.506 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-04T11:59:16.506Z,1543924756.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T11:59:16.506Z,1543924756.506 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-04T11:59:16.888Z,1543924756.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T11:59:16.888Z,1543924756.888 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:59:16.889Z,1543924756.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T11:59:16.889Z,1543924756.889 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T11:59:16.889Z,1543924756.889 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T11:59:16.890Z,1543924756.890 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:00:03.869Z,1543924803.869 [Reporter](INFO): platform_buoyancy_position 962.366583 cc 2018-12-04T12:01:18.925Z,1543924878.925 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:01:18.925Z,1543924878.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-04T12:01:18.925Z,1543924878.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:01:18.927Z,1543924878.927 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:01:18.927Z,1543924878.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-04T12:01:18.927Z,1543924878.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:01:18.940Z,1543924878.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:01:18.940Z,1543924878.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:01:19.054Z,1543924879.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:01:19.054Z,1543924879.054 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-04T12:01:19.055Z,1543924879.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:01:19.055Z,1543924879.055 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-04T12:01:19.390Z,1543924879.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:01:19.390Z,1543924879.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:01:19.391Z,1543924879.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:01:19.391Z,1543924879.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:01:19.391Z,1543924879.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:01:19.392Z,1543924879.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:03:19.542Z,1543924999.542 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:03:19.542Z,1543924999.542 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-04T12:03:19.542Z,1543924999.542 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:03:19.544Z,1543924999.544 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:03:19.544Z,1543924999.544 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-04T12:03:19.545Z,1543924999.545 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:03:19.563Z,1543924999.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:03:19.563Z,1543924999.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:03:19.944Z,1543924999.944 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T12:03:19.944Z,1543924999.944 [Default:CheckIn:C.Wait] Stopped 2018-12-04T12:03:19.944Z,1543924999.944 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T12:03:19.944Z,1543924999.944 [Default:CheckIn:D] Running Loop=1 2018-12-04T12:03:19.957Z,1543924999.957 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:03:19.957Z,1543924999.957 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-04T12:03:19.958Z,1543924999.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:03:19.958Z,1543924999.958 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-04T12:03:20.341Z,1543925000.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:03:20.342Z,1543925000.342 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:03:20.342Z,1543925000.342 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:03:20.342Z,1543925000.342 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:03:20.343Z,1543925000.343 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:03:20.343Z,1543925000.343 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:03:20.345Z,1543925000.345 [Default:CheckIn:D] Stopped 2018-12-04T12:03:20.345Z,1543925000.345 [Default:CheckIn:E] Running Loop=1 2018-12-04T12:03:20.746Z,1543925000.746 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 888.472070 min 2018-12-04T12:03:20.746Z,1543925000.746 [Default:CheckIn:E] Stopped 2018-12-04T12:03:20.747Z,1543925000.747 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T12:03:20.747Z,1543925000.747 [Default:CheckIn] Stopped 2018-12-04T12:03:20.747Z,1543925000.747 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T12:03:20.747Z,1543925000.747 [Default:CheckIn](INFO): Running loop #87 2018-12-04T12:03:20.747Z,1543925000.747 [Default:CheckIn] Running Loop=87 2018-12-04T12:03:20.747Z,1543925000.747 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T12:03:20.747Z,1543925000.747 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T12:03:21.511Z,1543925001.511 [NAL9602](INFO): Powering up 2018-12-04T12:03:32.719Z,1543925012.719 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:03:33.512Z,1543925013.512 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T12:03:33.512Z,1543925013.512 [NAL9602] Data Fault, FailCount= 2 2018-12-04T12:03:33.512Z,1543925013.512 [NAL9602](ERROR): Data Fault 2018-12-04T12:03:33.584Z,1543925013.584 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:03:33.912Z,1543925013.912 [NAL9602](INFO): Powering down 2018-12-04T12:03:34.809Z,1543925014.809 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:03:34.809Z,1543925014.809 [NAL9602] No Fault, FailCount= 2 2018-12-04T12:04:04.277Z,1543925044.277 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:04:15.863Z,1543925055.863 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:05:20.650Z,1543925120.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:05:20.650Z,1543925120.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-04T12:05:20.650Z,1543925120.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:05:20.652Z,1543925120.652 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:05:20.652Z,1543925120.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-04T12:05:20.652Z,1543925120.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:05:20.665Z,1543925120.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:05:20.665Z,1543925120.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:05:21.073Z,1543925121.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:05:21.073Z,1543925121.073 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-04T12:05:21.074Z,1543925121.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:05:21.074Z,1543925121.074 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-04T12:05:21.462Z,1543925121.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:05:21.463Z,1543925121.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:05:21.463Z,1543925121.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:05:21.463Z,1543925121.463 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:05:21.464Z,1543925121.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:05:21.464Z,1543925121.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:06:23.891Z,1543925183.891 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T12:06:23.891Z,1543925183.891 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T12:06:23.891Z,1543925183.891 [DropWeight](ERROR): Hardware Fault 2018-12-04T12:06:23.951Z,1543925183.951 [CBIT](INFO): Critical error at 20181204T120623 2018-12-04T12:06:23.954Z,1543925183.954 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T12:06:23.956Z,1543925183.956 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T12:06:24.340Z,1543925184.340 [CBIT](INFO): Critical error at 20181204T120623 2018-12-04T12:07:21.478Z,1543925241.478 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:07:21.478Z,1543925241.478 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-04T12:07:21.478Z,1543925241.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:07:21.480Z,1543925241.480 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:07:21.480Z,1543925241.480 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-04T12:07:21.480Z,1543925241.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:07:21.494Z,1543925241.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:07:21.494Z,1543925241.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:07:21.903Z,1543925241.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:07:21.903Z,1543925241.903 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-04T12:07:21.903Z,1543925241.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:07:21.904Z,1543925241.904 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-04T12:07:22.277Z,1543925242.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:07:22.277Z,1543925242.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:07:22.277Z,1543925242.277 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:07:22.278Z,1543925242.278 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:07:22.278Z,1543925242.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:07:22.279Z,1543925242.279 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:08:21.510Z,1543925301.510 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T12:03:20.7Z 2018-12-04T12:08:21.510Z,1543925301.510 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T12:08:21.511Z,1543925301.511 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T12:08:26.529Z,1543925306.529 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0258.lzma 2018-12-04T12:08:27.338Z,1543925307.338 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0258.lzma.bak 2018-12-04T12:08:27.338Z,1543925307.338 [DataOverHttps](INFO): SBD MOMSN=8964299 2018-12-04T12:08:37.236Z,1543925317.236 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0259.lzma 2018-12-04T12:08:38.833Z,1543925318.833 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0259.lzma.bak 2018-12-04T12:08:38.833Z,1543925318.833 [DataOverHttps](INFO): SBD MOMSN=8964303 2018-12-04T12:08:40.215Z,1543925320.215 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T12:08:40.215Z,1543925320.215 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T12:08:40.216Z,1543925320.216 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T12:09:19.048Z,1543925359.048 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T12:09:22.356Z,1543925362.356 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:09:22.357Z,1543925362.357 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-04T12:09:22.357Z,1543925362.357 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:09:22.359Z,1543925362.359 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:09:22.359Z,1543925362.359 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-04T12:09:22.359Z,1543925362.359 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:09:22.372Z,1543925362.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:09:22.372Z,1543925362.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:09:22.772Z,1543925362.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:09:22.772Z,1543925362.772 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-04T12:09:22.772Z,1543925362.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:09:22.772Z,1543925362.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-04T12:09:23.158Z,1543925363.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:09:23.158Z,1543925363.158 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:09:23.159Z,1543925363.159 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:09:23.159Z,1543925363.159 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:09:23.160Z,1543925363.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:09:23.160Z,1543925363.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:09:49.535Z,1543925389.535 [NAL9602](INFO): Powering down 2018-12-04T12:11:23.189Z,1543925483.189 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:11:23.189Z,1543925483.189 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-04T12:11:23.190Z,1543925483.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:11:23.192Z,1543925483.192 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:11:23.192Z,1543925483.192 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-04T12:11:23.192Z,1543925483.192 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:11:23.205Z,1543925483.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:11:23.205Z,1543925483.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:11:23.606Z,1543925483.606 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:11:23.606Z,1543925483.606 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-04T12:11:23.606Z,1543925483.606 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:11:23.606Z,1543925483.606 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-04T12:11:24.014Z,1543925484.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:11:24.014Z,1543925484.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:11:24.015Z,1543925484.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:11:24.015Z,1543925484.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:11:24.016Z,1543925484.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:11:24.016Z,1543925484.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:13:25.455Z,1543925605.455 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:13:25.455Z,1543925605.455 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-04T12:13:25.456Z,1543925605.456 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:13:25.458Z,1543925605.458 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:13:25.458Z,1543925605.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-04T12:13:25.458Z,1543925605.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:13:25.511Z,1543925605.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:13:25.512Z,1543925605.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:13:25.597Z,1543925605.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:13:25.597Z,1543925605.597 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-04T12:13:25.598Z,1543925605.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:13:25.598Z,1543925605.598 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-04T12:13:25.960Z,1543925605.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:13:25.961Z,1543925605.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:13:25.961Z,1543925605.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:13:25.961Z,1543925605.961 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:13:25.962Z,1543925605.962 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:13:25.962Z,1543925605.962 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:13:40.366Z,1543925620.366 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T12:13:40.366Z,1543925620.366 [Default:CheckIn:C.Wait] Stopped 2018-12-04T12:13:40.366Z,1543925620.366 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T12:13:40.366Z,1543925620.366 [Default:CheckIn:D] Running Loop=1 2018-12-04T12:13:40.770Z,1543925620.770 [Default:CheckIn:D] Stopped 2018-12-04T12:13:40.770Z,1543925620.770 [Default:CheckIn:E] Running Loop=1 2018-12-04T12:13:41.170Z,1543925621.170 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 898.812500 min 2018-12-04T12:13:41.170Z,1543925621.170 [Default:CheckIn:E] Stopped 2018-12-04T12:13:41.171Z,1543925621.171 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T12:13:41.171Z,1543925621.171 [Default:CheckIn] Stopped 2018-12-04T12:13:41.171Z,1543925621.171 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T12:13:41.171Z,1543925621.171 [Default:CheckIn](INFO): Running loop #88 2018-12-04T12:13:41.171Z,1543925621.171 [Default:CheckIn] Running Loop=88 2018-12-04T12:13:41.171Z,1543925621.171 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T12:13:41.171Z,1543925621.171 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T12:13:41.935Z,1543925621.935 [NAL9602](INFO): Powering up 2018-12-04T12:13:53.136Z,1543925633.136 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:14:25.103Z,1543925665.103 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T12:14:25.186Z,1543925665.186 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T12:14:25.186Z,1543925665.186 [NAL9602] Data Fault, FailCount= 3 2018-12-04T12:14:25.186Z,1543925665.186 [NAL9602](ERROR): Data Fault 2018-12-04T12:14:25.261Z,1543925665.261 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:14:25.503Z,1543925665.503 [NAL9602](INFO): Powering down 2018-12-04T12:14:26.348Z,1543925666.348 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:14:26.348Z,1543925666.348 [NAL9602] No Fault, FailCount= 3 2018-12-04T12:14:55.615Z,1543925695.615 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:15:06.820Z,1543925706.820 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:15:07.614Z,1543925707.614 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T12:15:07.614Z,1543925707.614 [NAL9602] Data Fault, FailCount= 4 2018-12-04T12:15:07.614Z,1543925707.614 [NAL9602](ERROR): Data Fault 2018-12-04T12:15:07.664Z,1543925707.664 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:15:08.019Z,1543925708.019 [NAL9602](INFO): Powering down 2018-12-04T12:15:11.313Z,1543925711.313 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:15:11.313Z,1543925711.313 [NAL9602] No Fault, FailCount= 4 2018-12-04T12:15:26.067Z,1543925726.067 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:15:26.067Z,1543925726.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-04T12:15:26.067Z,1543925726.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:15:26.069Z,1543925726.069 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:15:26.069Z,1543925726.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-04T12:15:26.069Z,1543925726.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:15:26.083Z,1543925726.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:15:26.083Z,1543925726.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:15:26.486Z,1543925726.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:15:26.486Z,1543925726.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-04T12:15:26.487Z,1543925726.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:15:26.487Z,1543925726.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-04T12:15:26.874Z,1543925726.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:15:26.874Z,1543925726.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:15:26.875Z,1543925726.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:15:26.875Z,1543925726.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:15:26.875Z,1543925726.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:15:26.876Z,1543925726.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:15:38.043Z,1543925738.043 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:15:48.855Z,1543925748.855 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:17:27.211Z,1543925847.211 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:17:27.211Z,1543925847.211 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-04T12:17:27.211Z,1543925847.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:17:27.213Z,1543925847.213 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:17:27.213Z,1543925847.213 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-04T12:17:27.213Z,1543925847.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:17:27.269Z,1543925847.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:17:27.270Z,1543925847.270 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:17:27.646Z,1543925847.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:17:27.646Z,1543925847.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-04T12:17:27.646Z,1543925847.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:17:27.646Z,1543925847.646 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-04T12:17:28.022Z,1543925848.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:17:28.037Z,1543925848.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:17:28.037Z,1543925848.037 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:17:28.038Z,1543925848.038 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:17:28.038Z,1543925848.038 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:17:28.039Z,1543925848.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:18:42.566Z,1543925922.566 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T12:13:41.2Z 2018-12-04T12:18:42.567Z,1543925922.567 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T12:18:42.567Z,1543925922.567 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T12:18:47.884Z,1543925927.884 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0261.lzma 2018-12-04T12:18:48.681Z,1543925928.681 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0261.lzma.bak 2018-12-04T12:18:48.681Z,1543925928.681 [DataOverHttps](INFO): SBD MOMSN=8964332 2018-12-04T12:18:58.152Z,1543925938.152 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T12:18:58.227Z,1543925938.227 [DataOverHttps](INFO): Sending 339 bytes from file Logs/20181203T211451/Express0262.lzma 2018-12-04T12:18:58.997Z,1543925938.997 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0262.lzma.bak 2018-12-04T12:18:58.997Z,1543925938.997 [DataOverHttps](INFO): SBD MOMSN=8964334 2018-12-04T12:19:00.300Z,1543925940.300 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T12:19:00.300Z,1543925940.300 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T12:19:00.300Z,1543925940.300 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T12:19:28.297Z,1543925968.297 [NAL9602](INFO): Powering down 2018-12-04T12:19:28.318Z,1543925968.318 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:19:28.319Z,1543925968.319 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-04T12:19:28.319Z,1543925968.319 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:19:28.321Z,1543925968.321 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:19:28.321Z,1543925968.321 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-04T12:19:28.321Z,1543925968.321 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:19:28.346Z,1543925968.346 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:19:28.347Z,1543925968.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:19:28.771Z,1543925968.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:19:28.771Z,1543925968.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-04T12:19:28.772Z,1543925968.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:19:28.772Z,1543925968.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-04T12:19:29.122Z,1543925969.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:19:29.122Z,1543925969.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:19:29.123Z,1543925969.123 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:19:29.123Z,1543925969.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:19:29.123Z,1543925969.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:19:29.124Z,1543925969.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:21:24.780Z,1543926084.780 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T12:21:24.781Z,1543926084.781 [DropWeight] No Fault, FailCount= 1 2018-12-04T12:21:29.215Z,1543926089.215 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:21:29.215Z,1543926089.215 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-04T12:21:29.215Z,1543926089.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:21:29.217Z,1543926089.217 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:21:29.217Z,1543926089.217 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-04T12:21:29.217Z,1543926089.217 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:21:29.230Z,1543926089.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:21:29.231Z,1543926089.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:21:29.626Z,1543926089.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:21:29.626Z,1543926089.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-04T12:21:29.627Z,1543926089.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:21:29.627Z,1543926089.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-04T12:21:30.018Z,1543926090.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:21:30.019Z,1543926090.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:21:30.019Z,1543926090.019 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:21:30.020Z,1543926090.020 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:21:30.020Z,1543926090.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:21:30.020Z,1543926090.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:23:30.320Z,1543926210.320 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:23:30.320Z,1543926210.320 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-04T12:23:30.320Z,1543926210.320 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:23:30.322Z,1543926210.322 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:23:30.323Z,1543926210.323 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-04T12:23:30.323Z,1543926210.323 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:23:30.336Z,1543926210.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:23:30.336Z,1543926210.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:23:30.722Z,1543926210.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:23:30.723Z,1543926210.723 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-04T12:23:30.723Z,1543926210.723 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:23:30.724Z,1543926210.724 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-04T12:23:31.106Z,1543926211.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:23:31.106Z,1543926211.106 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:23:31.107Z,1543926211.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:23:31.107Z,1543926211.107 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:23:31.107Z,1543926211.107 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:23:31.108Z,1543926211.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:24:00.486Z,1543926240.486 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T12:24:00.486Z,1543926240.486 [Default:CheckIn:C.Wait] Stopped 2018-12-04T12:24:00.486Z,1543926240.486 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T12:24:00.486Z,1543926240.486 [Default:CheckIn:D] Running Loop=1 2018-12-04T12:24:00.882Z,1543926240.882 [Default:CheckIn:D] Stopped 2018-12-04T12:24:00.882Z,1543926240.882 [Default:CheckIn:E] Running Loop=1 2018-12-04T12:24:01.279Z,1543926241.279 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 909.147656 min 2018-12-04T12:24:01.279Z,1543926241.279 [Default:CheckIn:E] Stopped 2018-12-04T12:24:01.280Z,1543926241.280 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T12:24:01.280Z,1543926241.280 [Default:CheckIn] Stopped 2018-12-04T12:24:01.280Z,1543926241.280 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T12:24:01.280Z,1543926241.280 [Default:CheckIn](INFO): Running loop #89 2018-12-04T12:24:01.280Z,1543926241.280 [Default:CheckIn] Running Loop=89 2018-12-04T12:24:01.280Z,1543926241.280 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T12:24:01.280Z,1543926241.280 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T12:24:02.051Z,1543926242.051 [NAL9602](INFO): Powering up 2018-12-04T12:24:13.256Z,1543926253.256 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:24:44.868Z,1543926284.868 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T12:24:44.942Z,1543926284.942 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T12:24:44.942Z,1543926284.942 [NAL9602] Data Fault, FailCount= 5 2018-12-04T12:24:44.942Z,1543926284.942 [NAL9602](ERROR): Data Fault 2018-12-04T12:24:44.981Z,1543926284.981 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:24:44.981Z,1543926284.981 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T12:24:45.268Z,1543926285.268 [NAL9602](INFO): Powering down 2018-12-04T12:24:45.331Z,1543926285.331 [CBIT](INFO): Critical error at 20181204T122444 2018-12-04T12:25:31.209Z,1543926331.209 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:25:31.209Z,1543926331.209 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-04T12:25:31.209Z,1543926331.209 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:25:31.211Z,1543926331.211 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:25:31.212Z,1543926331.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-04T12:25:31.212Z,1543926331.212 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:25:31.226Z,1543926331.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:25:31.226Z,1543926331.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:25:31.343Z,1543926331.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:25:31.343Z,1543926331.343 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-04T12:25:31.344Z,1543926331.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:25:31.344Z,1543926331.344 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-04T12:25:31.658Z,1543926331.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:25:31.658Z,1543926331.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:25:31.659Z,1543926331.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:25:31.659Z,1543926331.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:25:31.660Z,1543926331.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:25:31.660Z,1543926331.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:26:45.216Z,1543926405.216 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:26:45.216Z,1543926405.216 [NAL9602] No Fault, FailCount= 5 2018-12-04T12:26:45.564Z,1543926405.564 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:26:56.366Z,1543926416.366 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:26:57.168Z,1543926417.168 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T12:26:57.168Z,1543926417.168 [NAL9602] Data Fault, FailCount= 1 2018-12-04T12:26:57.168Z,1543926417.168 [NAL9602](ERROR): Data Fault 2018-12-04T12:26:57.237Z,1543926417.237 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:26:57.565Z,1543926417.565 [NAL9602](INFO): Powering down 2018-12-04T12:26:58.411Z,1543926418.411 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:26:58.411Z,1543926418.411 [NAL9602] No Fault, FailCount= 1 2018-12-04T12:27:27.688Z,1543926447.688 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:27:31.719Z,1543926451.719 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:27:31.719Z,1543926451.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-04T12:27:31.719Z,1543926451.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:27:31.721Z,1543926451.721 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:27:31.721Z,1543926451.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-04T12:27:31.721Z,1543926451.721 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:27:31.745Z,1543926451.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:27:31.746Z,1543926451.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:27:32.139Z,1543926452.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:27:32.139Z,1543926452.139 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-04T12:27:32.140Z,1543926452.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:27:32.140Z,1543926452.140 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-04T12:27:32.511Z,1543926452.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:27:32.511Z,1543926452.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:27:32.512Z,1543926452.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:27:32.512Z,1543926452.512 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:27:32.512Z,1543926452.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:27:32.513Z,1543926452.513 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:27:38.488Z,1543926458.488 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:29:02.506Z,1543926542.506 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T12:24:01.3Z 2018-12-04T12:29:02.507Z,1543926542.507 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T12:29:02.507Z,1543926542.507 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T12:29:07.836Z,1543926547.836 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0264.lzma 2018-12-04T12:29:08.633Z,1543926548.633 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0264.lzma.bak 2018-12-04T12:29:08.633Z,1543926548.633 [DataOverHttps](INFO): SBD MOMSN=8964366 2018-12-04T12:29:18.375Z,1543926558.375 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T12:29:18.433Z,1543926558.433 [DataOverHttps](INFO): Sending 343 bytes from file Logs/20181203T211451/Express0265.lzma 2018-12-04T12:29:19.233Z,1543926559.233 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0265.lzma.bak 2018-12-04T12:29:19.233Z,1543926559.233 [DataOverHttps](INFO): SBD MOMSN=8964369 2018-12-04T12:29:20.571Z,1543926560.571 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T12:29:20.571Z,1543926560.571 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T12:29:20.571Z,1543926560.571 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T12:29:32.571Z,1543926572.571 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:29:32.571Z,1543926572.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-04T12:29:32.571Z,1543926572.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:29:32.573Z,1543926572.573 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:29:32.573Z,1543926572.573 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-04T12:29:32.573Z,1543926572.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:29:32.587Z,1543926572.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:29:32.587Z,1543926572.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:29:32.983Z,1543926572.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:29:32.983Z,1543926572.983 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-04T12:29:32.984Z,1543926572.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:29:32.984Z,1543926572.984 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-04T12:29:33.378Z,1543926573.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:29:33.378Z,1543926573.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:29:33.379Z,1543926573.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:29:33.379Z,1543926573.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:29:33.379Z,1543926573.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:29:33.380Z,1543926573.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:29:48.551Z,1543926588.551 [NAL9602](INFO): Powering down 2018-12-04T12:31:33.741Z,1543926693.741 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:31:33.741Z,1543926693.741 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-04T12:31:33.741Z,1543926693.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:31:33.744Z,1543926693.744 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:31:33.744Z,1543926693.744 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-04T12:31:33.744Z,1543926693.744 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:31:33.758Z,1543926693.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:31:33.758Z,1543926693.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:31:34.162Z,1543926694.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:31:34.162Z,1543926694.162 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-04T12:31:34.163Z,1543926694.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:31:34.163Z,1543926694.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-04T12:31:34.541Z,1543926694.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:31:34.541Z,1543926694.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:31:34.542Z,1543926694.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:31:34.542Z,1543926694.542 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:31:34.543Z,1543926694.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:31:34.543Z,1543926694.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:33:34.549Z,1543926814.549 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:33:34.549Z,1543926814.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-04T12:33:34.549Z,1543926814.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:33:34.551Z,1543926814.551 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:33:34.551Z,1543926814.551 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-04T12:33:34.552Z,1543926814.552 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:33:34.565Z,1543926814.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:33:34.565Z,1543926814.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:33:34.964Z,1543926814.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:33:34.964Z,1543926814.964 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-04T12:33:34.965Z,1543926814.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:33:34.965Z,1543926814.965 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-04T12:33:35.358Z,1543926815.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:33:35.358Z,1543926815.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:33:35.359Z,1543926815.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:33:35.359Z,1543926815.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:33:35.359Z,1543926815.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:33:35.360Z,1543926815.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:34:20.921Z,1543926860.921 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T12:34:20.921Z,1543926860.921 [Default:CheckIn:C.Wait] Stopped 2018-12-04T12:34:20.922Z,1543926860.922 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T12:34:20.922Z,1543926860.922 [Default:CheckIn:D] Running Loop=1 2018-12-04T12:34:21.325Z,1543926861.325 [Default:CheckIn:D] Stopped 2018-12-04T12:34:21.325Z,1543926861.325 [Default:CheckIn:E] Running Loop=1 2018-12-04T12:34:21.710Z,1543926861.710 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 919.488411 min 2018-12-04T12:34:21.730Z,1543926861.730 [Default:CheckIn:E] Stopped 2018-12-04T12:34:21.730Z,1543926861.730 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T12:34:21.731Z,1543926861.731 [Default:CheckIn] Stopped 2018-12-04T12:34:21.731Z,1543926861.731 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T12:34:21.731Z,1543926861.731 [Default:CheckIn](INFO): Running loop #90 2018-12-04T12:34:21.731Z,1543926861.731 [Default:CheckIn] Running Loop=90 2018-12-04T12:34:21.731Z,1543926861.731 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T12:34:21.731Z,1543926861.731 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T12:34:22.491Z,1543926862.491 [NAL9602](INFO): Powering up 2018-12-04T12:34:33.688Z,1543926873.688 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:35:05.662Z,1543926905.662 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T12:35:05.738Z,1543926905.738 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T12:35:05.738Z,1543926905.738 [NAL9602] Data Fault, FailCount= 2 2018-12-04T12:35:05.738Z,1543926905.738 [NAL9602](ERROR): Data Fault 2018-12-04T12:35:05.793Z,1543926905.793 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:35:06.068Z,1543926906.068 [NAL9602](INFO): Powering down 2018-12-04T12:35:06.906Z,1543926906.906 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:35:06.907Z,1543926906.907 [NAL9602] No Fault, FailCount= 2 2018-12-04T12:35:35.753Z,1543926935.753 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:35:35.753Z,1543926935.753 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-04T12:35:35.753Z,1543926935.753 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:35:35.755Z,1543926935.755 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:35:35.755Z,1543926935.755 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-04T12:35:35.755Z,1543926935.755 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:35:35.768Z,1543926935.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:35:35.769Z,1543926935.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:35:36.128Z,1543926936.128 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:35:36.174Z,1543926936.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:35:36.174Z,1543926936.174 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-04T12:35:36.175Z,1543926936.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:35:36.175Z,1543926936.175 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-04T12:35:36.557Z,1543926936.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:35:36.558Z,1543926936.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:35:36.558Z,1543926936.558 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:35:36.559Z,1543926936.559 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:35:36.559Z,1543926936.559 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:35:36.560Z,1543926936.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:35:47.328Z,1543926947.328 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:37:36.918Z,1543927056.918 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:37:36.919Z,1543927056.919 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-04T12:37:36.919Z,1543927056.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:37:36.921Z,1543927056.921 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:37:36.921Z,1543927056.921 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-04T12:37:36.921Z,1543927056.921 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:37:36.935Z,1543927056.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:37:36.935Z,1543927056.935 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:37:37.082Z,1543927057.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:37:37.082Z,1543927057.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-04T12:37:37.083Z,1543927057.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:37:37.083Z,1543927057.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-04T12:37:37.378Z,1543927057.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:37:37.379Z,1543927057.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:37:37.379Z,1543927057.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:37:37.380Z,1543927057.380 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:37:37.380Z,1543927057.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:37:37.380Z,1543927057.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:39:22.711Z,1543927162.711 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T12:34:21.7Z 2018-12-04T12:39:22.711Z,1543927162.711 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T12:39:22.711Z,1543927162.711 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T12:39:23.594Z,1543927163.594 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0267.lzma 2018-12-04T12:39:24.073Z,1543927164.073 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0267.lzma.bak 2018-12-04T12:39:24.073Z,1543927164.073 [DataOverHttps](INFO): SBD MOMSN=8964398 2018-12-04T12:39:33.968Z,1543927173.968 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20181203T211451/Express0268.lzma 2018-12-04T12:39:34.744Z,1543927174.744 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0268.lzma.bak 2018-12-04T12:39:34.744Z,1543927174.744 [DataOverHttps](INFO): SBD MOMSN=8964400 2018-12-04T12:39:36.078Z,1543927176.078 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T12:39:36.078Z,1543927176.078 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T12:39:36.078Z,1543927176.078 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T12:39:39.709Z,1543927179.709 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T12:39:39.727Z,1543927179.727 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:39:39.727Z,1543927179.727 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-04T12:39:39.728Z,1543927179.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:39:39.730Z,1543927179.730 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:39:39.730Z,1543927179.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-04T12:39:39.730Z,1543927179.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:39:39.743Z,1543927179.743 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:39:39.743Z,1543927179.743 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:39:39.860Z,1543927179.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:39:39.860Z,1543927179.860 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-04T12:39:39.860Z,1543927179.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:39:39.860Z,1543927179.860 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-04T12:39:40.182Z,1543927180.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:39:40.183Z,1543927180.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:39:40.183Z,1543927180.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:39:40.183Z,1543927180.183 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:39:40.184Z,1543927180.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:39:40.184Z,1543927180.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:40:10.155Z,1543927210.155 [NAL9602](INFO): Powering down 2018-12-04T12:41:40.210Z,1543927300.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:41:40.210Z,1543927300.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-04T12:41:40.211Z,1543927300.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:41:40.213Z,1543927300.213 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:41:40.213Z,1543927300.213 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-04T12:41:40.213Z,1543927300.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:41:40.227Z,1543927300.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:41:40.227Z,1543927300.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:41:40.626Z,1543927300.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:41:40.626Z,1543927300.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-04T12:41:40.626Z,1543927300.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:41:40.626Z,1543927300.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-04T12:41:41.010Z,1543927301.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:41:41.010Z,1543927301.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:41:41.011Z,1543927301.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:41:41.011Z,1543927301.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:41:41.011Z,1543927301.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:41:41.012Z,1543927301.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:43:41.017Z,1543927421.017 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:43:41.018Z,1543927421.018 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-04T12:43:41.018Z,1543927421.018 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:43:41.020Z,1543927421.020 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:43:41.020Z,1543927421.020 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-04T12:43:41.020Z,1543927421.020 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:43:41.033Z,1543927421.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:43:41.033Z,1543927421.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:43:41.447Z,1543927421.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:43:41.447Z,1543927421.447 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-04T12:43:41.448Z,1543927421.448 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:43:41.448Z,1543927421.448 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-04T12:43:41.825Z,1543927421.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:43:41.825Z,1543927421.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:43:41.825Z,1543927421.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:43:41.826Z,1543927421.826 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:43:41.826Z,1543927421.826 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:43:41.827Z,1543927421.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:44:36.300Z,1543927476.300 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T12:44:36.301Z,1543927476.301 [Default:CheckIn:C.Wait] Stopped 2018-12-04T12:44:36.301Z,1543927476.301 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T12:44:36.301Z,1543927476.301 [Default:CheckIn:D] Running Loop=1 2018-12-04T12:44:36.682Z,1543927476.682 [Default:CheckIn:D] Stopped 2018-12-04T12:44:36.682Z,1543927476.682 [Default:CheckIn:E] Running Loop=1 2018-12-04T12:44:37.086Z,1543927477.086 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 929.744336 min 2018-12-04T12:44:37.110Z,1543927477.110 [Default:CheckIn:E] Stopped 2018-12-04T12:44:37.111Z,1543927477.111 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T12:44:37.111Z,1543927477.111 [Default:CheckIn] Stopped 2018-12-04T12:44:37.111Z,1543927477.111 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T12:44:37.111Z,1543927477.111 [Default:CheckIn](INFO): Running loop #91 2018-12-04T12:44:37.111Z,1543927477.111 [Default:CheckIn] Running Loop=91 2018-12-04T12:44:37.111Z,1543927477.111 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T12:44:37.111Z,1543927477.111 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T12:44:37.859Z,1543927477.859 [NAL9602](INFO): Powering up 2018-12-04T12:44:49.060Z,1543927489.060 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:44:49.858Z,1543927489.858 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T12:44:49.858Z,1543927489.858 [NAL9602] Data Fault, FailCount= 3 2018-12-04T12:44:49.858Z,1543927489.858 [NAL9602](ERROR): Data Fault 2018-12-04T12:44:49.891Z,1543927489.891 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:44:50.260Z,1543927490.260 [NAL9602](INFO): Powering down 2018-12-04T12:44:51.096Z,1543927491.096 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:44:51.096Z,1543927491.096 [NAL9602] No Fault, FailCount= 3 2018-12-04T12:45:20.640Z,1543927520.640 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:45:32.307Z,1543927532.307 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:45:41.934Z,1543927541.934 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:45:41.934Z,1543927541.934 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-04T12:45:41.934Z,1543927541.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:45:41.936Z,1543927541.936 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:45:41.936Z,1543927541.936 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-04T12:45:41.937Z,1543927541.937 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:45:41.950Z,1543927541.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:45:41.950Z,1543927541.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:45:42.364Z,1543927542.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:45:42.364Z,1543927542.364 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-04T12:45:42.364Z,1543927542.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:45:42.364Z,1543927542.364 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-04T12:45:42.730Z,1543927542.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:45:42.731Z,1543927542.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:45:42.731Z,1543927542.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:45:42.731Z,1543927542.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:45:42.732Z,1543927542.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:45:42.732Z,1543927542.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:47:43.054Z,1543927663.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:47:43.054Z,1543927663.054 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-04T12:47:43.055Z,1543927663.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:47:43.057Z,1543927663.057 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:47:43.057Z,1543927663.057 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-04T12:47:43.057Z,1543927663.057 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:47:43.070Z,1543927663.070 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:47:43.071Z,1543927663.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:47:43.470Z,1543927663.470 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:47:43.470Z,1543927663.470 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-04T12:47:43.471Z,1543927663.471 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:47:43.471Z,1543927663.471 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-04T12:47:43.854Z,1543927663.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:47:43.855Z,1543927663.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:47:43.855Z,1543927663.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:47:43.855Z,1543927663.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:47:43.856Z,1543927663.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:47:43.856Z,1543927663.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:49:38.410Z,1543927778.410 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T12:44:37.1Z 2018-12-04T12:49:38.410Z,1543927778.410 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T12:49:38.410Z,1543927778.410 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T12:49:43.415Z,1543927783.415 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0270.lzma 2018-12-04T12:49:43.889Z,1543927783.889 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:49:43.889Z,1543927783.889 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-04T12:49:43.890Z,1543927783.890 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:49:43.892Z,1543927783.892 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:49:43.892Z,1543927783.892 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-04T12:49:43.892Z,1543927783.892 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:49:43.905Z,1543927783.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:49:43.905Z,1543927783.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:49:44.217Z,1543927784.217 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0270.lzma.bak 2018-12-04T12:49:44.217Z,1543927784.217 [DataOverHttps](INFO): SBD MOMSN=8964431 2018-12-04T12:49:44.283Z,1543927784.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:49:44.283Z,1543927784.283 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-04T12:49:44.284Z,1543927784.284 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:49:44.284Z,1543927784.284 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-04T12:49:45.517Z,1543927785.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:49:45.518Z,1543927785.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:49:45.518Z,1543927785.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:49:45.518Z,1543927785.518 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:49:45.519Z,1543927785.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:49:45.519Z,1543927785.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:49:53.744Z,1543927793.744 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0271.lzma 2018-12-04T12:49:54.541Z,1543927794.541 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0271.lzma.bak 2018-12-04T12:49:54.541Z,1543927794.541 [DataOverHttps](INFO): SBD MOMSN=8964433 2018-12-04T12:49:55.979Z,1543927795.979 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T12:49:55.979Z,1543927795.979 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T12:49:55.979Z,1543927795.979 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T12:50:35.364Z,1543927835.364 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T12:51:05.762Z,1543927865.762 [NAL9602](INFO): Powering down 2018-12-04T12:51:25.765Z,1543927885.765 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T12:51:25.765Z,1543927885.765 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T12:51:25.765Z,1543927885.765 [DropWeight](ERROR): Hardware Fault 2018-12-04T12:51:25.832Z,1543927885.832 [CBIT](INFO): Critical error at 20181204T125125 2018-12-04T12:51:25.838Z,1543927885.838 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T12:51:25.843Z,1543927885.843 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T12:51:26.208Z,1543927886.208 [CBIT](INFO): Critical error at 20181204T125125 2018-12-04T12:51:45.665Z,1543927905.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:51:45.665Z,1543927905.665 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-04T12:51:45.665Z,1543927905.665 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:51:45.667Z,1543927905.667 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:51:45.667Z,1543927905.667 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-04T12:51:45.667Z,1543927905.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:51:45.693Z,1543927905.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:51:45.694Z,1543927905.694 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:51:46.048Z,1543927906.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:51:46.048Z,1543927906.048 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-04T12:51:46.049Z,1543927906.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:51:46.049Z,1543927906.049 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-04T12:51:46.415Z,1543927906.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:51:46.415Z,1543927906.415 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:51:46.416Z,1543927906.416 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:51:46.416Z,1543927906.416 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:51:46.416Z,1543927906.416 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:51:46.417Z,1543927906.417 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:53:46.729Z,1543928026.729 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:53:46.729Z,1543928026.729 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-04T12:53:46.729Z,1543928026.729 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:53:46.732Z,1543928026.732 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:53:46.732Z,1543928026.732 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-04T12:53:46.732Z,1543928026.732 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:53:46.746Z,1543928026.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:53:46.746Z,1543928026.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:53:47.159Z,1543928027.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:53:47.159Z,1543928027.159 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-04T12:53:47.159Z,1543928027.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:53:47.159Z,1543928027.159 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-04T12:53:47.522Z,1543928027.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:53:47.522Z,1543928027.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:53:47.523Z,1543928027.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:53:47.523Z,1543928027.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:53:47.523Z,1543928027.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:53:47.524Z,1543928027.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:54:56.170Z,1543928096.170 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T12:54:56.170Z,1543928096.170 [Default:CheckIn:C.Wait] Stopped 2018-12-04T12:54:56.170Z,1543928096.170 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T12:54:56.170Z,1543928096.170 [Default:CheckIn:D] Running Loop=1 2018-12-04T12:54:56.570Z,1543928096.570 [Default:CheckIn:D] Stopped 2018-12-04T12:54:56.570Z,1543928096.570 [Default:CheckIn:E] Running Loop=1 2018-12-04T12:54:56.971Z,1543928096.971 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 940.075781 min 2018-12-04T12:54:56.971Z,1543928096.971 [Default:CheckIn:E] Stopped 2018-12-04T12:54:56.971Z,1543928096.971 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T12:54:56.972Z,1543928096.972 [Default:CheckIn] Stopped 2018-12-04T12:54:56.972Z,1543928096.972 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T12:54:56.972Z,1543928096.972 [Default:CheckIn](INFO): Running loop #92 2018-12-04T12:54:56.972Z,1543928096.972 [Default:CheckIn] Running Loop=92 2018-12-04T12:54:56.972Z,1543928096.972 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T12:54:56.972Z,1543928096.972 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T12:54:57.727Z,1543928097.727 [NAL9602](INFO): Powering up 2018-12-04T12:55:08.928Z,1543928108.928 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:55:40.564Z,1543928140.564 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T12:55:40.638Z,1543928140.638 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T12:55:40.638Z,1543928140.638 [NAL9602] Data Fault, FailCount= 4 2018-12-04T12:55:40.638Z,1543928140.638 [NAL9602](ERROR): Data Fault 2018-12-04T12:55:40.700Z,1543928140.700 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:55:40.963Z,1543928140.963 [NAL9602](INFO): Powering down 2018-12-04T12:55:41.810Z,1543928141.810 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:55:41.810Z,1543928141.810 [NAL9602] No Fault, FailCount= 4 2018-12-04T12:55:47.793Z,1543928147.793 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:55:47.793Z,1543928147.793 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-04T12:55:47.794Z,1543928147.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:55:47.796Z,1543928147.796 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:55:47.796Z,1543928147.796 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-04T12:55:47.796Z,1543928147.796 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:55:47.810Z,1543928147.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:55:47.811Z,1543928147.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:55:48.208Z,1543928148.208 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:55:48.208Z,1543928148.208 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-04T12:55:48.208Z,1543928148.208 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:55:48.208Z,1543928148.208 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-04T12:55:48.590Z,1543928148.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:55:48.590Z,1543928148.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:55:48.591Z,1543928148.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:55:48.591Z,1543928148.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:55:48.591Z,1543928148.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:55:48.592Z,1543928148.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:55:52.080Z,1543928152.080 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T12:56:11.347Z,1543928171.347 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:56:22.147Z,1543928182.147 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:56:22.948Z,1543928182.948 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T12:56:22.948Z,1543928182.948 [NAL9602] Data Fault, FailCount= 5 2018-12-04T12:56:22.948Z,1543928182.948 [NAL9602](ERROR): Data Fault 2018-12-04T12:56:23.010Z,1543928183.010 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T12:56:23.014Z,1543928183.014 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T12:56:23.347Z,1543928183.347 [NAL9602](INFO): Powering down 2018-12-04T12:56:23.392Z,1543928183.392 [CBIT](INFO): Critical error at 20181204T125623 2018-12-04T12:57:48.984Z,1543928268.984 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:57:48.985Z,1543928268.985 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-04T12:57:48.985Z,1543928268.985 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:57:48.987Z,1543928268.987 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:57:48.987Z,1543928268.987 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-04T12:57:48.987Z,1543928268.987 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:57:49.001Z,1543928269.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:57:49.001Z,1543928269.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:57:49.401Z,1543928269.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:57:49.401Z,1543928269.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-04T12:57:49.402Z,1543928269.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:57:49.402Z,1543928269.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-04T12:57:49.786Z,1543928269.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:57:49.787Z,1543928269.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:57:49.787Z,1543928269.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:57:49.787Z,1543928269.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:57:49.788Z,1543928269.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:57:49.788Z,1543928269.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:58:23.059Z,1543928303.059 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T12:58:23.060Z,1543928303.060 [NAL9602] No Fault, FailCount= 5 2018-12-04T12:58:23.419Z,1543928303.419 [NAL9602](INFO): Powering up NAL9602 2018-12-04T12:58:34.620Z,1543928314.620 [NAL9602](INFO): NAL9602 initialized 2018-12-04T12:59:49.796Z,1543928389.796 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:59:49.796Z,1543928389.796 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-04T12:59:49.796Z,1543928389.796 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T12:59:49.799Z,1543928389.799 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T12:59:49.799Z,1543928389.799 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-04T12:59:49.799Z,1543928389.799 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T12:59:49.825Z,1543928389.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T12:59:49.825Z,1543928389.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T12:59:50.235Z,1543928390.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T12:59:50.235Z,1543928390.235 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-04T12:59:50.236Z,1543928390.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T12:59:50.236Z,1543928390.236 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-04T12:59:50.622Z,1543928390.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T12:59:50.623Z,1543928390.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:59:50.623Z,1543928390.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:59:50.623Z,1543928390.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T12:59:50.624Z,1543928390.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T12:59:50.624Z,1543928390.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T12:59:58.928Z,1543928398.928 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T12:54:56.0Z 2018-12-04T12:59:58.928Z,1543928398.928 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T12:59:58.928Z,1543928398.928 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T13:00:04.455Z,1543928404.455 [DataOverHttps](INFO): Sending 142 bytes from file Logs/20181203T211451/Courier0273.lzma 2018-12-04T13:00:05.253Z,1543928405.253 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0273.lzma.bak 2018-12-04T13:00:05.254Z,1543928405.254 [DataOverHttps](INFO): SBD MOMSN=8964462 2018-12-04T13:00:12.178Z,1543928412.178 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T13:00:15.734Z,1543928415.734 [DataOverHttps](INFO): Sending 354 bytes from file Logs/20181203T211451/Express0274.lzma 2018-12-04T13:00:16.517Z,1543928416.517 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0274.lzma.bak 2018-12-04T13:00:16.517Z,1543928416.517 [DataOverHttps](INFO): SBD MOMSN=8964467 2018-12-04T13:00:17.850Z,1543928417.850 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T13:00:17.850Z,1543928417.850 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T13:00:17.850Z,1543928417.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T13:00:42.771Z,1543928442.771 [NAL9602](INFO): Powering down 2018-12-04T13:01:50.776Z,1543928510.776 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:01:50.776Z,1543928510.776 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-04T13:01:50.776Z,1543928510.776 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:01:50.778Z,1543928510.778 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:01:50.778Z,1543928510.778 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-04T13:01:50.778Z,1543928510.778 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:01:50.823Z,1543928510.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:01:50.823Z,1543928510.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:01:51.188Z,1543928511.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:01:51.188Z,1543928511.188 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-04T13:01:51.189Z,1543928511.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:01:51.189Z,1543928511.189 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-04T13:01:51.578Z,1543928511.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:01:51.579Z,1543928511.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:01:51.579Z,1543928511.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:01:51.579Z,1543928511.579 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:01:51.580Z,1543928511.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:01:51.580Z,1543928511.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:03:52.800Z,1543928632.800 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:03:52.800Z,1543928632.800 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-04T13:03:52.800Z,1543928632.800 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:03:52.803Z,1543928632.803 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:03:52.803Z,1543928632.803 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-04T13:03:52.803Z,1543928632.803 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:03:52.816Z,1543928632.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:03:52.816Z,1543928632.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:03:52.944Z,1543928632.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:03:52.944Z,1543928632.944 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-04T13:03:52.944Z,1543928632.944 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:03:52.944Z,1543928632.944 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-04T13:03:53.258Z,1543928633.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:03:53.259Z,1543928633.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:03:53.259Z,1543928633.259 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:03:53.260Z,1543928633.260 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:03:53.260Z,1543928633.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:03:53.260Z,1543928633.260 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:05:18.046Z,1543928718.046 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T13:05:18.046Z,1543928718.046 [Default:CheckIn:C.Wait] Stopped 2018-12-04T13:05:18.046Z,1543928718.046 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T13:05:18.046Z,1543928718.046 [Default:CheckIn:D] Running Loop=1 2018-12-04T13:05:18.446Z,1543928718.446 [Default:CheckIn:D] Stopped 2018-12-04T13:05:18.446Z,1543928718.446 [Default:CheckIn:E] Running Loop=1 2018-12-04T13:05:18.841Z,1543928718.841 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 950.440365 min 2018-12-04T13:05:18.841Z,1543928718.841 [Default:CheckIn:E] Stopped 2018-12-04T13:05:18.842Z,1543928718.842 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T13:05:18.842Z,1543928718.842 [Default:CheckIn] Stopped 2018-12-04T13:05:18.842Z,1543928718.842 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T13:05:18.842Z,1543928718.842 [Default:CheckIn](INFO): Running loop #93 2018-12-04T13:05:18.842Z,1543928718.842 [Default:CheckIn] Running Loop=93 2018-12-04T13:05:18.842Z,1543928718.842 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T13:05:18.842Z,1543928718.842 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T13:05:19.615Z,1543928719.615 [NAL9602](INFO): Powering up 2018-12-04T13:05:30.815Z,1543928730.815 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:05:53.603Z,1543928753.603 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:05:53.603Z,1543928753.603 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-04T13:05:53.604Z,1543928753.604 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:05:53.606Z,1543928753.606 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:05:53.606Z,1543928753.606 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-04T13:05:53.606Z,1543928753.606 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:05:53.619Z,1543928753.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:05:53.619Z,1543928753.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:05:54.008Z,1543928754.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:05:54.009Z,1543928754.009 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-04T13:05:54.009Z,1543928754.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:05:54.009Z,1543928754.009 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-04T13:05:54.390Z,1543928754.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:05:54.391Z,1543928754.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:05:54.391Z,1543928754.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:05:54.391Z,1543928754.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:05:54.392Z,1543928754.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:05:54.392Z,1543928754.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:06:02.776Z,1543928762.776 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T13:06:02.858Z,1543928762.858 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T13:06:02.858Z,1543928762.858 [NAL9602] Data Fault, FailCount= 1 2018-12-04T13:06:02.858Z,1543928762.858 [NAL9602](ERROR): Data Fault 2018-12-04T13:06:02.919Z,1543928762.919 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T13:06:03.163Z,1543928763.163 [NAL9602](INFO): Powering down 2018-12-04T13:06:04.010Z,1543928764.010 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T13:06:04.010Z,1543928764.010 [NAL9602] No Fault, FailCount= 1 2018-12-04T13:06:25.977Z,1543928785.977 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T13:06:25.977Z,1543928785.977 [DropWeight] No Fault, FailCount= 1 2018-12-04T13:06:33.520Z,1543928793.520 [NAL9602](INFO): Powering up NAL9602 2018-12-04T13:06:44.724Z,1543928804.724 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:07:54.519Z,1543928874.519 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:07:54.519Z,1543928874.519 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-04T13:07:54.519Z,1543928874.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:07:54.521Z,1543928874.521 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:07:54.521Z,1543928874.521 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-04T13:07:54.521Z,1543928874.521 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:07:54.589Z,1543928874.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:07:54.590Z,1543928874.590 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:07:54.937Z,1543928874.937 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:07:54.937Z,1543928874.937 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-04T13:07:54.938Z,1543928874.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:07:54.938Z,1543928874.938 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-04T13:07:55.326Z,1543928875.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:07:55.327Z,1543928875.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:07:55.328Z,1543928875.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:07:55.328Z,1543928875.328 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:07:55.328Z,1543928875.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:07:55.329Z,1543928875.329 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:09:55.364Z,1543928995.364 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:09:55.364Z,1543928995.364 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-04T13:09:55.364Z,1543928995.364 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:09:55.366Z,1543928995.366 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:09:55.366Z,1543928995.366 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-04T13:09:55.366Z,1543928995.366 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:09:55.413Z,1543928995.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:09:55.414Z,1543928995.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:09:55.794Z,1543928995.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:09:55.794Z,1543928995.794 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-04T13:09:55.795Z,1543928995.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:09:55.795Z,1543928995.795 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-04T13:09:56.154Z,1543928996.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:09:56.155Z,1543928996.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:09:56.156Z,1543928996.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:09:56.156Z,1543928996.156 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:09:56.157Z,1543928996.157 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:09:56.157Z,1543928996.157 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:10:20.110Z,1543929020.110 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T13:05:18.8Z 2018-12-04T13:10:20.110Z,1543929020.110 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T13:10:20.111Z,1543929020.111 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T13:10:25.033Z,1543929025.033 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0276.lzma 2018-12-04T13:10:25.834Z,1543929025.834 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0276.lzma.bak 2018-12-04T13:10:25.834Z,1543929025.834 [DataOverHttps](INFO): SBD MOMSN=8964498 2018-12-04T13:10:35.476Z,1543929035.476 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T13:10:35.936Z,1543929035.936 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0277.lzma 2018-12-04T13:10:36.733Z,1543929036.733 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0277.lzma.bak 2018-12-04T13:10:36.734Z,1543929036.734 [DataOverHttps](INFO): SBD MOMSN=8964500 2018-12-04T13:10:38.223Z,1543929038.223 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T13:10:38.223Z,1543929038.223 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T13:10:38.223Z,1543929038.223 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T13:11:05.804Z,1543929065.804 [NAL9602](INFO): Powering down 2018-12-04T13:11:56.309Z,1543929116.309 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:11:56.309Z,1543929116.309 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-04T13:11:56.309Z,1543929116.309 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:11:56.311Z,1543929116.311 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:11:56.312Z,1543929116.312 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-04T13:11:56.312Z,1543929116.312 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:11:56.325Z,1543929116.325 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:11:56.325Z,1543929116.325 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:11:56.730Z,1543929116.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:11:56.730Z,1543929116.730 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-04T13:11:56.731Z,1543929116.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:11:56.731Z,1543929116.731 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-04T13:11:57.109Z,1543929117.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:11:57.109Z,1543929117.109 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:11:57.110Z,1543929117.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:11:57.110Z,1543929117.110 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:11:57.111Z,1543929117.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:11:57.111Z,1543929117.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:13:57.370Z,1543929237.370 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:13:57.370Z,1543929237.370 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-04T13:13:57.370Z,1543929237.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:13:57.372Z,1543929237.372 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:13:57.372Z,1543929237.372 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-04T13:13:57.373Z,1543929237.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:13:57.386Z,1543929237.386 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:13:57.386Z,1543929237.386 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:13:57.777Z,1543929237.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:13:57.777Z,1543929237.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-04T13:13:57.778Z,1543929237.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:13:57.778Z,1543929237.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-04T13:13:58.170Z,1543929238.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:13:58.170Z,1543929238.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:13:58.171Z,1543929238.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:13:58.171Z,1543929238.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:13:58.171Z,1543929238.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:13:58.172Z,1543929238.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:15:38.585Z,1543929338.585 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T13:15:38.586Z,1543929338.586 [Default:CheckIn:C.Wait] Stopped 2018-12-04T13:15:38.586Z,1543929338.586 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T13:15:38.586Z,1543929338.586 [Default:CheckIn:D] Running Loop=1 2018-12-04T13:15:38.990Z,1543929338.990 [Default:CheckIn:D] Stopped 2018-12-04T13:15:38.990Z,1543929338.990 [Default:CheckIn:E] Running Loop=1 2018-12-04T13:15:39.394Z,1543929339.394 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 960.782812 min 2018-12-04T13:15:39.394Z,1543929339.394 [Default:CheckIn:E] Stopped 2018-12-04T13:15:39.394Z,1543929339.394 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T13:15:39.395Z,1543929339.395 [Default:CheckIn] Stopped 2018-12-04T13:15:39.395Z,1543929339.395 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T13:15:39.395Z,1543929339.395 [Default:CheckIn](INFO): Running loop #94 2018-12-04T13:15:39.395Z,1543929339.395 [Default:CheckIn] Running Loop=94 2018-12-04T13:15:39.395Z,1543929339.395 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T13:15:39.395Z,1543929339.395 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T13:15:40.155Z,1543929340.155 [NAL9602](INFO): Powering up 2018-12-04T13:15:51.360Z,1543929351.360 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:15:52.156Z,1543929352.156 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T13:15:52.156Z,1543929352.156 [NAL9602] Data Fault, FailCount= 2 2018-12-04T13:15:52.156Z,1543929352.156 [NAL9602](ERROR): Data Fault 2018-12-04T13:15:52.239Z,1543929352.239 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T13:15:52.554Z,1543929352.554 [NAL9602](INFO): Powering down 2018-12-04T13:15:53.400Z,1543929353.400 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T13:15:53.400Z,1543929353.400 [NAL9602] No Fault, FailCount= 2 2018-12-04T13:15:58.538Z,1543929358.538 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:15:58.538Z,1543929358.538 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-04T13:15:58.538Z,1543929358.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:15:58.540Z,1543929358.540 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:15:58.541Z,1543929358.541 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-04T13:15:58.541Z,1543929358.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:15:58.554Z,1543929358.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:15:58.554Z,1543929358.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:15:58.684Z,1543929358.684 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:15:58.684Z,1543929358.684 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-04T13:15:58.685Z,1543929358.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:15:58.685Z,1543929358.685 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-04T13:15:58.991Z,1543929358.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:15:58.992Z,1543929358.992 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:15:58.992Z,1543929358.992 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:15:58.993Z,1543929358.993 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:15:58.993Z,1543929358.993 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:15:58.993Z,1543929358.993 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:16:22.568Z,1543929382.568 [NAL9602](INFO): Powering up NAL9602 2018-12-04T13:16:34.184Z,1543929394.184 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:17:59.359Z,1543929479.359 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:17:59.359Z,1543929479.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-04T13:17:59.359Z,1543929479.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:17:59.361Z,1543929479.361 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:17:59.361Z,1543929479.361 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-04T13:17:59.361Z,1543929479.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:17:59.375Z,1543929479.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:17:59.375Z,1543929479.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:17:59.777Z,1543929479.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:17:59.777Z,1543929479.777 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-04T13:17:59.778Z,1543929479.778 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:17:59.778Z,1543929479.778 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-04T13:18:00.165Z,1543929480.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:18:00.166Z,1543929480.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:18:00.166Z,1543929480.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:18:00.166Z,1543929480.166 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:18:00.167Z,1543929480.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:18:00.167Z,1543929480.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:20:00.366Z,1543929600.366 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:20:00.366Z,1543929600.366 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-04T13:20:00.366Z,1543929600.366 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:20:00.368Z,1543929600.368 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:20:00.368Z,1543929600.368 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-04T13:20:00.369Z,1543929600.369 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:20:00.410Z,1543929600.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:20:00.410Z,1543929600.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:20:00.810Z,1543929600.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:20:00.810Z,1543929600.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-04T13:20:00.811Z,1543929600.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:20:00.811Z,1543929600.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-04T13:20:01.169Z,1543929601.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:20:01.170Z,1543929601.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:20:01.170Z,1543929601.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:20:01.171Z,1543929601.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:20:01.171Z,1543929601.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:20:01.172Z,1543929601.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:20:40.259Z,1543929640.259 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T13:15:39.4Z 2018-12-04T13:20:40.259Z,1543929640.259 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T13:20:40.259Z,1543929640.259 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T13:20:41.129Z,1543929641.129 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0279.lzma 2018-12-04T13:20:41.597Z,1543929641.597 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0279.lzma.bak 2018-12-04T13:20:41.597Z,1543929641.597 [DataOverHttps](INFO): SBD MOMSN=8964530 2018-12-04T13:20:51.190Z,1543929651.190 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0280.lzma 2018-12-04T13:20:51.952Z,1543929651.952 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0280.lzma.bak 2018-12-04T13:20:51.953Z,1543929651.953 [DataOverHttps](INFO): SBD MOMSN=8964532 2018-12-04T13:20:53.270Z,1543929653.270 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T13:20:53.270Z,1543929653.270 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T13:20:53.270Z,1543929653.270 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T13:21:37.240Z,1543929697.240 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T13:22:01.266Z,1543929721.266 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:22:01.266Z,1543929721.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-04T13:22:01.266Z,1543929721.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:22:01.268Z,1543929721.268 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:22:01.268Z,1543929721.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-04T13:22:01.269Z,1543929721.269 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:22:01.282Z,1543929721.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:22:01.282Z,1543929721.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:22:01.678Z,1543929721.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:22:01.679Z,1543929721.679 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-04T13:22:01.679Z,1543929721.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:22:01.679Z,1543929721.679 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-04T13:22:02.069Z,1543929722.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:22:02.069Z,1543929722.069 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:22:02.070Z,1543929722.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:22:02.070Z,1543929722.070 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:22:02.071Z,1543929722.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:22:02.071Z,1543929722.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:22:07.748Z,1543929727.748 [NAL9602](INFO): Powering down 2018-12-04T13:24:02.095Z,1543929842.095 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:24:02.095Z,1543929842.095 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-04T13:24:02.095Z,1543929842.095 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:24:02.097Z,1543929842.097 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:24:02.097Z,1543929842.097 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-04T13:24:02.097Z,1543929842.097 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:24:02.110Z,1543929842.110 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:24:02.111Z,1543929842.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:24:02.510Z,1543929842.510 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:24:02.510Z,1543929842.510 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-04T13:24:02.511Z,1543929842.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:24:02.511Z,1543929842.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-04T13:24:02.882Z,1543929842.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:24:02.882Z,1543929842.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:24:02.883Z,1543929842.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:24:02.883Z,1543929842.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:24:02.883Z,1543929842.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:24:02.884Z,1543929842.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:25:53.394Z,1543929953.394 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T13:25:53.394Z,1543929953.394 [Default:CheckIn:C.Wait] Stopped 2018-12-04T13:25:53.394Z,1543929953.394 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T13:25:53.394Z,1543929953.394 [Default:CheckIn:D] Running Loop=1 2018-12-04T13:25:53.794Z,1543929953.794 [Default:CheckIn:D] Stopped 2018-12-04T13:25:53.794Z,1543929953.794 [Default:CheckIn:E] Running Loop=1 2018-12-04T13:25:54.187Z,1543929954.187 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 971.029557 min 2018-12-04T13:25:54.188Z,1543929954.188 [Default:CheckIn:E] Stopped 2018-12-04T13:25:54.188Z,1543929954.188 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T13:25:54.188Z,1543929954.188 [Default:CheckIn] Stopped 2018-12-04T13:25:54.188Z,1543929954.188 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T13:25:54.188Z,1543929954.188 [Default:CheckIn](INFO): Running loop #95 2018-12-04T13:25:54.188Z,1543929954.188 [Default:CheckIn] Running Loop=95 2018-12-04T13:25:54.188Z,1543929954.188 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T13:25:54.189Z,1543929954.189 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T13:25:54.959Z,1543929954.959 [NAL9602](INFO): Powering up 2018-12-04T13:26:02.981Z,1543929962.981 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:26:02.981Z,1543929962.981 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-04T13:26:02.981Z,1543929962.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:26:02.983Z,1543929962.983 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:26:02.984Z,1543929962.984 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-04T13:26:02.984Z,1543929962.984 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:26:02.998Z,1543929962.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:26:02.998Z,1543929962.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:26:03.402Z,1543929963.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:26:03.402Z,1543929963.402 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-04T13:26:03.402Z,1543929963.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:26:03.403Z,1543929963.403 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-04T13:26:03.783Z,1543929963.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:26:03.783Z,1543929963.783 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:26:03.784Z,1543929963.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:26:03.784Z,1543929963.784 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:26:03.785Z,1543929963.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:26:03.785Z,1543929963.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:26:06.164Z,1543929966.164 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:26:38.172Z,1543929998.172 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T13:26:38.246Z,1543929998.246 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T13:26:38.246Z,1543929998.246 [NAL9602] Data Fault, FailCount= 3 2018-12-04T13:26:38.246Z,1543929998.246 [NAL9602](ERROR): Data Fault 2018-12-04T13:26:38.305Z,1543929998.305 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T13:26:38.571Z,1543929998.571 [NAL9602](INFO): Powering down 2018-12-04T13:26:39.416Z,1543929999.416 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T13:26:39.416Z,1543929999.416 [NAL9602] No Fault, FailCount= 3 2018-12-04T13:27:08.924Z,1543930028.924 [NAL9602](INFO): Powering up NAL9602 2018-12-04T13:27:20.124Z,1543930040.124 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:27:20.935Z,1543930040.935 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T13:27:20.935Z,1543930040.935 [NAL9602] Data Fault, FailCount= 4 2018-12-04T13:27:20.935Z,1543930040.935 [NAL9602](ERROR): Data Fault 2018-12-04T13:27:20.977Z,1543930040.977 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T13:27:24.089Z,1543930044.089 [NAL9602](INFO): Powering down 2018-12-04T13:27:24.581Z,1543930044.581 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T13:27:24.581Z,1543930044.581 [NAL9602] No Fault, FailCount= 4 2018-12-04T13:27:54.138Z,1543930074.138 [NAL9602](INFO): Powering up NAL9602 2018-12-04T13:28:03.869Z,1543930083.869 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:28:03.869Z,1543930083.869 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-04T13:28:03.869Z,1543930083.869 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:28:03.871Z,1543930083.871 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:28:03.871Z,1543930083.871 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-04T13:28:03.871Z,1543930083.871 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:28:03.884Z,1543930083.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:28:03.885Z,1543930083.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:28:04.290Z,1543930084.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:28:04.290Z,1543930084.290 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-04T13:28:04.290Z,1543930084.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:28:04.290Z,1543930084.290 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-04T13:28:04.690Z,1543930084.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:28:04.691Z,1543930084.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:28:04.691Z,1543930084.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:28:04.691Z,1543930084.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:28:04.692Z,1543930084.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:28:04.692Z,1543930084.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:28:05.052Z,1543930085.052 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:28:41.108Z,1543930121.108 [CBIT](IMPORTANT): Beginning ground fault scan 2018-12-04T13:28:51.930Z,1543930131.930 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.144201 CHAN A1 (24V): 0.000791 CHAN A2 (12V): -0.005638 CHAN A3 (5V): -0.002961 CHAN B0 (3.3V): -0.001651 CHAN B1 (3.15aV): -0.001452 CHAN B2 (3.15bV): -0.001226 CHAN B3 (GND): -0.000406 OPEN: -0.001263 Full Scale Calc: 4.765 mA, -1.589 mA 2018-12-04T13:30:05.068Z,1543930205.068 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:30:05.068Z,1543930205.068 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-04T13:30:05.068Z,1543930205.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:30:05.071Z,1543930205.071 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:30:05.071Z,1543930205.071 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-04T13:30:05.071Z,1543930205.071 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:30:05.084Z,1543930205.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:30:05.084Z,1543930205.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:30:05.494Z,1543930205.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:30:05.494Z,1543930205.494 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-04T13:30:05.495Z,1543930205.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:30:05.495Z,1543930205.495 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-04T13:30:05.882Z,1543930205.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:30:05.882Z,1543930205.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:30:05.883Z,1543930205.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:30:05.883Z,1543930205.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:30:05.883Z,1543930205.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:30:05.884Z,1543930205.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:30:55.334Z,1543930255.334 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T13:25:54.2Z 2018-12-04T13:30:55.334Z,1543930255.334 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T13:30:55.334Z,1543930255.334 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T13:31:00.409Z,1543930260.409 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0282.lzma 2018-12-04T13:31:01.210Z,1543930261.210 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0282.lzma.bak 2018-12-04T13:31:01.210Z,1543930261.210 [DataOverHttps](INFO): SBD MOMSN=8964564 2018-12-04T13:31:10.415Z,1543930270.415 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T13:31:10.471Z,1543930270.471 [DataOverHttps](INFO): Sending 515 bytes from file Logs/20181203T211451/Express0283.lzma 2018-12-04T13:31:11.269Z,1543930271.269 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0283.lzma.bak 2018-12-04T13:31:11.270Z,1543930271.270 [DataOverHttps](INFO): SBD MOMSN=8964566 2018-12-04T13:31:12.798Z,1543930272.798 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T13:31:12.798Z,1543930272.798 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T13:31:12.798Z,1543930272.798 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T13:31:40.825Z,1543930300.825 [NAL9602](INFO): Powering down 2018-12-04T13:32:06.086Z,1543930326.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:32:06.086Z,1543930326.086 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-04T13:32:06.086Z,1543930326.086 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:32:06.088Z,1543930326.088 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:32:06.088Z,1543930326.088 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-04T13:32:06.088Z,1543930326.088 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:32:06.102Z,1543930326.102 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:32:06.102Z,1543930326.102 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:32:06.499Z,1543930326.499 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:32:06.499Z,1543930326.499 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-04T13:32:06.500Z,1543930326.500 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:32:06.500Z,1543930326.500 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-04T13:32:06.879Z,1543930326.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:32:06.879Z,1543930326.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:32:06.880Z,1543930326.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:32:06.880Z,1543930326.880 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:32:06.881Z,1543930326.881 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:32:06.881Z,1543930326.881 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:34:06.963Z,1543930446.963 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:34:06.963Z,1543930446.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-04T13:34:06.963Z,1543930446.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:34:06.965Z,1543930446.965 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:34:06.965Z,1543930446.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-04T13:34:06.965Z,1543930446.965 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:34:07.003Z,1543930447.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:34:07.003Z,1543930447.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:34:07.387Z,1543930447.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:34:07.387Z,1543930447.387 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-04T13:34:07.388Z,1543930447.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:34:07.388Z,1543930447.388 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-04T13:34:07.752Z,1543930447.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:34:07.752Z,1543930447.752 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:34:07.753Z,1543930447.753 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:34:07.753Z,1543930447.753 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:34:07.754Z,1543930447.754 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:34:07.754Z,1543930447.754 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:36:07.766Z,1543930567.766 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:36:07.766Z,1543930567.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-04T13:36:07.766Z,1543930567.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:36:07.768Z,1543930567.768 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:36:07.768Z,1543930567.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-04T13:36:07.768Z,1543930567.768 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:36:07.782Z,1543930567.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:36:07.782Z,1543930567.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:36:08.186Z,1543930568.186 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:36:08.186Z,1543930568.186 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-04T13:36:08.187Z,1543930568.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:36:08.187Z,1543930568.187 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-04T13:36:08.566Z,1543930568.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:36:08.566Z,1543930568.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:36:08.567Z,1543930568.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:36:08.567Z,1543930568.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:36:08.567Z,1543930568.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:36:08.568Z,1543930568.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:36:12.964Z,1543930572.964 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T13:36:12.964Z,1543930572.964 [Default:CheckIn:C.Wait] Stopped 2018-12-04T13:36:12.964Z,1543930572.964 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T13:36:12.964Z,1543930572.964 [Default:CheckIn:D] Running Loop=1 2018-12-04T13:36:13.387Z,1543930573.387 [Default:CheckIn:D] Stopped 2018-12-04T13:36:13.387Z,1543930573.387 [Default:CheckIn:E] Running Loop=1 2018-12-04T13:36:13.765Z,1543930573.765 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 981.356055 min 2018-12-04T13:36:13.765Z,1543930573.765 [Default:CheckIn:E] Stopped 2018-12-04T13:36:13.765Z,1543930573.765 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T13:36:13.765Z,1543930573.765 [Default:CheckIn] Stopped 2018-12-04T13:36:13.765Z,1543930573.765 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T13:36:13.766Z,1543930573.766 [Default:CheckIn](INFO): Running loop #96 2018-12-04T13:36:13.766Z,1543930573.766 [Default:CheckIn] Running Loop=96 2018-12-04T13:36:13.766Z,1543930573.766 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T13:36:13.766Z,1543930573.766 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T13:36:14.544Z,1543930574.544 [NAL9602](INFO): Powering up 2018-12-04T13:36:25.744Z,1543930585.744 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:36:27.343Z,1543930587.343 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T13:36:27.343Z,1543930587.343 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T13:36:27.343Z,1543930587.343 [DropWeight](ERROR): Hardware Fault 2018-12-04T13:36:27.413Z,1543930587.413 [CBIT](INFO): Critical error at 20181204T133627 2018-12-04T13:36:27.416Z,1543930587.416 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T13:36:27.416Z,1543930587.416 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T13:36:27.803Z,1543930587.803 [CBIT](INFO): Critical error at 20181204T133627 2018-12-04T13:36:57.476Z,1543930617.476 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T13:36:57.557Z,1543930617.557 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T13:36:57.557Z,1543930617.557 [NAL9602] Data Fault, FailCount= 5 2018-12-04T13:36:57.557Z,1543930617.557 [NAL9602](ERROR): Data Fault 2018-12-04T13:36:57.597Z,1543930617.597 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T13:36:57.597Z,1543930617.597 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T13:36:57.875Z,1543930617.875 [NAL9602](INFO): Powering down 2018-12-04T13:36:57.935Z,1543930617.935 [CBIT](INFO): Critical error at 20181204T133657 2018-12-04T13:38:08.820Z,1543930688.820 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:38:08.820Z,1543930688.820 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-04T13:38:08.820Z,1543930688.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:38:08.823Z,1543930688.823 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:38:08.823Z,1543930688.823 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-04T13:38:08.823Z,1543930688.823 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:38:08.836Z,1543930688.836 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:38:08.837Z,1543930688.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:38:09.236Z,1543930689.236 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:38:09.236Z,1543930689.236 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-04T13:38:09.237Z,1543930689.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:38:09.237Z,1543930689.237 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-04T13:38:09.630Z,1543930689.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:38:09.630Z,1543930689.630 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:38:09.631Z,1543930689.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:38:09.631Z,1543930689.631 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:38:09.632Z,1543930689.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:38:09.632Z,1543930689.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:38:57.939Z,1543930737.939 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T13:38:57.939Z,1543930737.939 [NAL9602] No Fault, FailCount= 5 2018-12-04T13:38:58.303Z,1543930738.303 [NAL9602](INFO): Powering up NAL9602 2018-12-04T13:39:09.107Z,1543930749.107 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:39:09.905Z,1543930749.905 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T13:39:09.905Z,1543930749.905 [NAL9602] Data Fault, FailCount= 1 2018-12-04T13:39:09.905Z,1543930749.905 [NAL9602](ERROR): Data Fault 2018-12-04T13:39:09.939Z,1543930749.939 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T13:39:10.303Z,1543930750.303 [NAL9602](INFO): Powering down 2018-12-04T13:39:11.137Z,1543930751.137 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T13:39:11.137Z,1543930751.137 [NAL9602] No Fault, FailCount= 1 2018-12-04T13:39:40.651Z,1543930780.651 [NAL9602](INFO): Powering up NAL9602 2018-12-04T13:39:51.851Z,1543930791.851 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:40:10.030Z,1543930810.030 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:40:10.030Z,1543930810.030 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-04T13:40:10.030Z,1543930810.030 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:40:10.032Z,1543930810.032 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:40:10.032Z,1543930810.032 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-04T13:40:10.033Z,1543930810.033 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:40:10.047Z,1543930810.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:40:10.047Z,1543930810.047 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:40:10.433Z,1543930810.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:40:10.433Z,1543930810.433 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-04T13:40:10.433Z,1543930810.433 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:40:10.433Z,1543930810.433 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-04T13:40:10.821Z,1543930810.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:40:10.822Z,1543930810.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:40:10.822Z,1543930810.822 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:40:10.823Z,1543930810.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:40:10.823Z,1543930810.823 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:40:10.824Z,1543930810.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:41:15.310Z,1543930875.310 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T13:36:13.8Z 2018-12-04T13:41:15.310Z,1543930875.310 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T13:41:15.311Z,1543930875.311 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T13:41:20.225Z,1543930880.225 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181203T211451/Courier0285.lzma 2018-12-04T13:41:21.025Z,1543930881.025 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0285.lzma.bak 2018-12-04T13:41:21.025Z,1543930881.025 [DataOverHttps](INFO): SBD MOMSN=8964602 2018-12-04T13:41:30.868Z,1543930890.868 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T13:41:30.940Z,1543930890.940 [DataOverHttps](INFO): Sending 340 bytes from file Logs/20181203T211451/Express0286.lzma 2018-12-04T13:41:31.729Z,1543930891.729 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0286.lzma.bak 2018-12-04T13:41:31.729Z,1543930891.729 [DataOverHttps](INFO): SBD MOMSN=8964607 2018-12-04T13:41:33.035Z,1543930893.035 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T13:41:33.035Z,1543930893.035 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T13:41:33.035Z,1543930893.035 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T13:42:01.055Z,1543930921.055 [NAL9602](INFO): Powering down 2018-12-04T13:42:11.769Z,1543930931.769 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:42:11.769Z,1543930931.769 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-04T13:42:11.769Z,1543930931.769 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:42:11.772Z,1543930931.772 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:42:11.772Z,1543930931.772 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-04T13:42:11.772Z,1543930931.772 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:42:11.829Z,1543930931.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:42:11.829Z,1543930931.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:42:11.902Z,1543930931.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:42:11.902Z,1543930931.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-04T13:42:11.903Z,1543930931.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:42:11.903Z,1543930931.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-04T13:42:12.274Z,1543930932.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:42:12.274Z,1543930932.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:42:12.275Z,1543930932.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:42:12.275Z,1543930932.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:42:12.275Z,1543930932.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:42:12.276Z,1543930932.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:44:12.474Z,1543931052.474 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:44:12.474Z,1543931052.474 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-04T13:44:12.474Z,1543931052.474 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:44:12.477Z,1543931052.477 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:44:12.477Z,1543931052.477 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-04T13:44:12.477Z,1543931052.477 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:44:12.490Z,1543931052.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:44:12.490Z,1543931052.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:44:12.886Z,1543931052.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:44:12.887Z,1543931052.887 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-04T13:44:12.887Z,1543931052.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:44:12.887Z,1543931052.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-04T13:44:13.274Z,1543931053.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:44:13.275Z,1543931053.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:44:13.275Z,1543931053.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:44:13.276Z,1543931053.276 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:44:13.276Z,1543931053.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:44:13.277Z,1543931053.277 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:46:13.385Z,1543931173.385 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:46:13.385Z,1543931173.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-04T13:46:13.385Z,1543931173.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:46:13.387Z,1543931173.387 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:46:13.387Z,1543931173.387 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-04T13:46:13.387Z,1543931173.387 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:46:13.401Z,1543931173.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:46:13.401Z,1543931173.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:46:13.790Z,1543931173.790 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:46:13.791Z,1543931173.791 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-04T13:46:13.791Z,1543931173.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:46:13.791Z,1543931173.791 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-04T13:46:14.180Z,1543931174.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:46:14.180Z,1543931174.180 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:46:14.181Z,1543931174.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:46:14.181Z,1543931174.181 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:46:14.182Z,1543931174.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:46:14.182Z,1543931174.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:46:33.438Z,1543931193.438 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T13:46:33.438Z,1543931193.438 [Default:CheckIn:C.Wait] Stopped 2018-12-04T13:46:33.438Z,1543931193.438 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T13:46:33.438Z,1543931193.438 [Default:CheckIn:D] Running Loop=1 2018-12-04T13:46:33.830Z,1543931193.830 [Default:CheckIn:D] Stopped 2018-12-04T13:46:33.830Z,1543931193.830 [Default:CheckIn:E] Running Loop=1 2018-12-04T13:46:34.238Z,1543931194.238 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 991.696810 min 2018-12-04T13:46:34.238Z,1543931194.238 [Default:CheckIn:E] Stopped 2018-12-04T13:46:34.239Z,1543931194.239 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T13:46:34.239Z,1543931194.239 [Default:CheckIn] Stopped 2018-12-04T13:46:34.239Z,1543931194.239 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T13:46:34.239Z,1543931194.239 [Default:CheckIn](INFO): Running loop #97 2018-12-04T13:46:34.239Z,1543931194.239 [Default:CheckIn] Running Loop=97 2018-12-04T13:46:34.239Z,1543931194.239 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T13:46:34.239Z,1543931194.239 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T13:46:35.003Z,1543931195.003 [NAL9602](INFO): Powering up 2018-12-04T13:46:46.203Z,1543931206.203 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:47:18.164Z,1543931238.164 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T13:47:18.242Z,1543931238.242 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T13:47:18.242Z,1543931238.242 [NAL9602] Data Fault, FailCount= 2 2018-12-04T13:47:18.242Z,1543931238.242 [NAL9602](ERROR): Data Fault 2018-12-04T13:47:18.276Z,1543931238.276 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T13:47:18.563Z,1543931238.563 [NAL9602](INFO): Powering down 2018-12-04T13:47:19.413Z,1543931239.413 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T13:47:19.413Z,1543931239.413 [NAL9602] No Fault, FailCount= 2 2018-12-04T13:47:48.929Z,1543931268.929 [NAL9602](INFO): Powering up NAL9602 2018-12-04T13:47:59.731Z,1543931279.731 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:48:14.514Z,1543931294.514 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:48:14.514Z,1543931294.514 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-04T13:48:14.514Z,1543931294.514 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:48:14.516Z,1543931294.516 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:48:14.517Z,1543931294.517 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-04T13:48:14.517Z,1543931294.517 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:48:14.530Z,1543931294.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:48:14.530Z,1543931294.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:48:14.934Z,1543931294.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:48:14.935Z,1543931294.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-04T13:48:14.935Z,1543931294.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:48:14.935Z,1543931294.935 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-04T13:48:15.334Z,1543931295.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:48:15.334Z,1543931295.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:48:15.335Z,1543931295.335 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:48:15.335Z,1543931295.335 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:48:15.336Z,1543931295.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:48:15.336Z,1543931295.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:50:15.507Z,1543931415.507 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:50:15.507Z,1543931415.507 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-04T13:50:15.507Z,1543931415.507 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:50:15.509Z,1543931415.509 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:50:15.509Z,1543931415.509 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-04T13:50:15.509Z,1543931415.509 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:50:15.544Z,1543931415.544 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:50:15.544Z,1543931415.544 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:50:15.951Z,1543931415.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:50:15.951Z,1543931415.951 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-04T13:50:15.952Z,1543931415.952 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:50:15.952Z,1543931415.952 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-04T13:50:16.310Z,1543931416.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:50:16.311Z,1543931416.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:50:16.311Z,1543931416.311 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:50:16.311Z,1543931416.311 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:50:16.312Z,1543931416.312 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:50:16.312Z,1543931416.312 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:51:27.457Z,1543931487.457 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T13:51:27.457Z,1543931487.457 [DropWeight] No Fault, FailCount= 1 2018-12-04T13:51:35.506Z,1543931495.506 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T13:46:34.2Z 2018-12-04T13:51:35.507Z,1543931495.507 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T13:51:35.507Z,1543931495.507 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T13:51:36.483Z,1543931496.483 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0288.lzma 2018-12-04T13:51:36.977Z,1543931496.977 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0288.lzma.bak 2018-12-04T13:51:36.977Z,1543931496.977 [DataOverHttps](INFO): SBD MOMSN=8964638 2018-12-04T13:51:47.232Z,1543931507.232 [DataOverHttps](INFO): Sending 320 bytes from file Logs/20181203T211451/Express0289.lzma 2018-12-04T13:51:48.030Z,1543931508.030 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0289.lzma.bak 2018-12-04T13:51:48.033Z,1543931508.033 [DataOverHttps](INFO): SBD MOMSN=8964640 2018-12-04T13:51:49.352Z,1543931509.352 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T13:51:49.352Z,1543931509.352 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T13:51:49.352Z,1543931509.352 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T13:51:49.412Z,1543931509.412 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T13:52:16.522Z,1543931536.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:52:16.522Z,1543931536.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-04T13:52:16.522Z,1543931536.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:52:16.524Z,1543931536.524 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:52:16.524Z,1543931536.524 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-04T13:52:16.525Z,1543931536.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:52:16.538Z,1543931536.538 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:52:16.538Z,1543931536.538 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:52:16.934Z,1543931536.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T13:52:16.935Z,1543931536.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-04T13:52:16.935Z,1543931536.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T13:52:16.935Z,1543931536.935 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-04T13:52:17.314Z,1543931537.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T13:52:17.328Z,1543931537.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:52:17.328Z,1543931537.328 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:52:17.329Z,1543931537.329 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T13:52:17.329Z,1543931537.329 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T13:52:17.329Z,1543931537.329 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T13:52:22.891Z,1543931542.891 [NAL9602](INFO): Powering down 2018-12-04T13:54:17.349Z,1543931657.349 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:54:17.349Z,1543931657.349 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-04T13:54:17.349Z,1543931657.349 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T13:54:17.351Z,1543931657.351 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T13:54:17.351Z,1543931657.351 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-04T13:54:17.351Z,1543931657.351 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T13:54:17.364Z,1543931657.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:54:17.365Z,1543931657.365 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T13:54:17.365Z,1543931657.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:54:17.366Z,1543931657.366 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T13:56:49.818Z,1543931809.818 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T13:56:49.818Z,1543931809.818 [Default:CheckIn:C.Wait] Stopped 2018-12-04T13:56:49.818Z,1543931809.818 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T13:56:49.818Z,1543931809.818 [Default:CheckIn:D] Running Loop=1 2018-12-04T13:56:50.227Z,1543931810.227 [Default:CheckIn:D] Stopped 2018-12-04T13:56:50.227Z,1543931810.227 [Default:CheckIn:E] Running Loop=1 2018-12-04T13:56:50.627Z,1543931810.627 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1001.970052 min 2018-12-04T13:56:50.628Z,1543931810.628 [Default:CheckIn:E] Stopped 2018-12-04T13:56:50.628Z,1543931810.628 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T13:56:50.628Z,1543931810.628 [Default:CheckIn] Stopped 2018-12-04T13:56:50.628Z,1543931810.628 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T13:56:50.628Z,1543931810.628 [Default:CheckIn](INFO): Running loop #98 2018-12-04T13:56:50.628Z,1543931810.628 [Default:CheckIn] Running Loop=98 2018-12-04T13:56:50.628Z,1543931810.628 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T13:56:50.628Z,1543931810.628 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T13:56:51.396Z,1543931811.396 [NAL9602](INFO): Powering up 2018-12-04T13:57:02.200Z,1543931822.200 [NAL9602](INFO): NAL9602 initialized 2018-12-04T13:57:03.000Z,1543931823.000 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T13:57:03.000Z,1543931823.000 [NAL9602] Data Fault, FailCount= 3 2018-12-04T13:57:03.000Z,1543931823.000 [NAL9602](ERROR): Data Fault 2018-12-04T13:57:03.054Z,1543931823.054 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T13:57:03.396Z,1543931823.396 [NAL9602](INFO): Powering down 2018-12-04T13:57:04.235Z,1543931824.235 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T13:57:04.235Z,1543931824.235 [NAL9602] No Fault, FailCount= 3 2018-12-04T13:57:33.760Z,1543931853.760 [NAL9602](INFO): Powering up NAL9602 2018-12-04T13:57:45.475Z,1543931865.475 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:01:51.795Z,1543932111.795 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T13:56:50.6Z 2018-12-04T14:01:51.795Z,1543932111.795 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T14:01:51.796Z,1543932111.796 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T14:01:56.741Z,1543932116.741 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0291.lzma 2018-12-04T14:01:57.541Z,1543932117.541 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0291.lzma.bak 2018-12-04T14:01:57.541Z,1543932117.541 [DataOverHttps](INFO): SBD MOMSN=8964671 2018-12-04T14:02:08.528Z,1543932128.528 [DataOverHttps](INFO): Sending 356 bytes from file Logs/20181203T211451/Express0292.lzma 2018-12-04T14:02:09.325Z,1543932129.325 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0292.lzma.bak 2018-12-04T14:02:09.325Z,1543932129.325 [DataOverHttps](INFO): SBD MOMSN=8964673 2018-12-04T14:02:10.645Z,1543932130.645 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T14:02:10.645Z,1543932130.645 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T14:02:10.645Z,1543932130.645 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T14:02:49.365Z,1543932169.365 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T14:03:19.844Z,1543932199.844 [NAL9602](INFO): Powering down 2018-12-04T14:03:21.473Z,1543932201.473 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T14:07:10.792Z,1543932430.792 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T14:07:10.792Z,1543932430.792 [Default:CheckIn:C.Wait] Stopped 2018-12-04T14:07:10.792Z,1543932430.792 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T14:07:10.792Z,1543932430.792 [Default:CheckIn:D] Running Loop=1 2018-12-04T14:07:11.203Z,1543932431.203 [Default:CheckIn:D] Stopped 2018-12-04T14:07:11.203Z,1543932431.203 [Default:CheckIn:E] Running Loop=1 2018-12-04T14:07:11.611Z,1543932431.611 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1012.319661 min 2018-12-04T14:07:11.611Z,1543932431.611 [Default:CheckIn:E] Stopped 2018-12-04T14:07:11.612Z,1543932431.612 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T14:07:11.612Z,1543932431.612 [Default:CheckIn] Stopped 2018-12-04T14:07:11.612Z,1543932431.612 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T14:07:11.612Z,1543932431.612 [Default:CheckIn](INFO): Running loop #99 2018-12-04T14:07:11.612Z,1543932431.612 [Default:CheckIn] Running Loop=99 2018-12-04T14:07:11.612Z,1543932431.612 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T14:07:11.612Z,1543932431.612 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T14:07:12.372Z,1543932432.372 [NAL9602](INFO): Powering up 2018-12-04T14:07:23.568Z,1543932443.568 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:07:55.301Z,1543932475.301 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T14:07:55.374Z,1543932475.374 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T14:07:55.374Z,1543932475.374 [NAL9602] Data Fault, FailCount= 4 2018-12-04T14:07:55.374Z,1543932475.374 [NAL9602](ERROR): Data Fault 2018-12-04T14:07:55.434Z,1543932475.434 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:07:55.684Z,1543932475.684 [NAL9602](INFO): Powering down 2018-12-04T14:07:56.536Z,1543932476.536 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:07:56.537Z,1543932476.537 [NAL9602] No Fault, FailCount= 4 2018-12-04T14:08:25.707Z,1543932505.707 [NAL9602](INFO): Powering up NAL9602 2018-12-04T14:08:36.900Z,1543932516.900 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:08:37.707Z,1543932517.707 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T14:08:37.707Z,1543932517.707 [NAL9602] Data Fault, FailCount= 5 2018-12-04T14:08:37.708Z,1543932517.708 [NAL9602](ERROR): Data Fault 2018-12-04T14:08:37.739Z,1543932517.739 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:08:37.739Z,1543932517.739 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T14:08:38.104Z,1543932518.104 [NAL9602](INFO): Powering down 2018-12-04T14:08:38.150Z,1543932518.150 [CBIT](INFO): Critical error at 20181204T140837 2018-12-04T14:09:17.641Z,1543932557.641 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:09:17.641Z,1543932557.641 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-04T14:09:17.642Z,1543932557.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:09:17.642Z,1543932557.642 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-04T14:09:18.022Z,1543932558.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:09:18.023Z,1543932558.023 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:09:18.023Z,1543932558.023 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:09:18.023Z,1543932558.023 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:09:18.024Z,1543932558.024 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:09:18.024Z,1543932558.024 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:10:37.711Z,1543932637.711 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:10:37.711Z,1543932637.711 [NAL9602] No Fault, FailCount= 5 2018-12-04T14:10:38.076Z,1543932638.076 [NAL9602](INFO): Powering up NAL9602 2018-12-04T14:10:48.872Z,1543932648.872 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:11:18.186Z,1543932678.186 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:11:18.186Z,1543932678.186 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-04T14:11:18.186Z,1543932678.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:11:18.188Z,1543932678.188 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:11:18.188Z,1543932678.188 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-04T14:11:18.188Z,1543932678.188 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:11:18.203Z,1543932678.203 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:11:18.203Z,1543932678.203 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:11:18.602Z,1543932678.602 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:11:18.602Z,1543932678.602 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-04T14:11:18.602Z,1543932678.602 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:11:18.602Z,1543932678.602 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-04T14:11:18.961Z,1543932678.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:11:18.962Z,1543932678.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:11:18.962Z,1543932678.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:11:18.962Z,1543932678.962 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:11:18.963Z,1543932678.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:11:18.963Z,1543932678.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:12:12.831Z,1543932732.831 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T14:07:11.6Z 2018-12-04T14:12:12.831Z,1543932732.831 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T14:12:12.831Z,1543932732.831 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T14:12:18.152Z,1543932738.152 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20181203T211451/Courier0294.lzma 2018-12-04T14:12:18.953Z,1543932738.953 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0294.lzma.bak 2018-12-04T14:12:18.953Z,1543932738.953 [DataOverHttps](INFO): SBD MOMSN=8964700 2018-12-04T14:12:28.743Z,1543932748.743 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T14:12:28.831Z,1543932748.831 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0295.lzma 2018-12-04T14:12:29.601Z,1543932749.601 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0295.lzma.bak 2018-12-04T14:12:29.601Z,1543932749.601 [DataOverHttps](INFO): SBD MOMSN=8964703 2018-12-04T14:12:30.918Z,1543932750.918 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T14:12:30.918Z,1543932750.918 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T14:12:30.918Z,1543932750.918 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T14:12:58.959Z,1543932778.959 [NAL9602](INFO): Powering down 2018-12-04T14:13:19.150Z,1543932799.150 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:13:19.150Z,1543932799.150 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-04T14:13:19.150Z,1543932799.150 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:13:19.152Z,1543932799.152 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:13:19.152Z,1543932799.152 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-04T14:13:19.152Z,1543932799.152 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:13:19.166Z,1543932799.166 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:13:19.166Z,1543932799.166 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:13:19.566Z,1543932799.566 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:13:19.566Z,1543932799.566 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-04T14:13:19.567Z,1543932799.567 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:13:19.567Z,1543932799.567 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-04T14:13:19.946Z,1543932799.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:13:19.947Z,1543932799.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:13:19.947Z,1543932799.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:13:19.947Z,1543932799.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:13:19.948Z,1543932799.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:13:19.948Z,1543932799.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:15:20.320Z,1543932920.320 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:15:20.320Z,1543932920.320 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-04T14:15:20.320Z,1543932920.320 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:15:20.322Z,1543932920.322 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:15:20.322Z,1543932920.322 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-04T14:15:20.322Z,1543932920.322 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:15:20.335Z,1543932920.335 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:15:20.336Z,1543932920.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:15:20.739Z,1543932920.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:15:20.739Z,1543932920.739 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-04T14:15:20.739Z,1543932920.739 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:15:20.739Z,1543932920.739 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-04T14:15:21.126Z,1543932921.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:15:21.126Z,1543932921.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:15:21.127Z,1543932921.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:15:21.127Z,1543932921.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:15:21.128Z,1543932921.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:15:21.128Z,1543932921.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:17:21.200Z,1543933041.200 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:17:21.200Z,1543933041.200 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-04T14:17:21.200Z,1543933041.200 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:17:21.202Z,1543933041.202 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:17:21.202Z,1543933041.202 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-04T14:17:21.202Z,1543933041.202 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:17:21.216Z,1543933041.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:17:21.217Z,1543933041.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:17:21.613Z,1543933041.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:17:21.613Z,1543933041.613 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-04T14:17:21.613Z,1543933041.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:17:21.613Z,1543933041.613 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-04T14:17:22.004Z,1543933042.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:17:22.005Z,1543933042.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:17:22.005Z,1543933042.005 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:17:22.006Z,1543933042.006 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:17:22.006Z,1543933042.006 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:17:22.007Z,1543933042.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:17:31.203Z,1543933051.203 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T14:17:31.203Z,1543933051.203 [Default:CheckIn:C.Wait] Stopped 2018-12-04T14:17:31.203Z,1543933051.203 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T14:17:31.204Z,1543933051.204 [Default:CheckIn:D] Running Loop=1 2018-12-04T14:17:31.604Z,1543933051.604 [Default:CheckIn:D] Stopped 2018-12-04T14:17:31.604Z,1543933051.604 [Default:CheckIn:E] Running Loop=1 2018-12-04T14:17:32.010Z,1543933052.010 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1022.659701 min 2018-12-04T14:17:32.010Z,1543933052.010 [Default:CheckIn:E] Stopped 2018-12-04T14:17:32.010Z,1543933052.010 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T14:17:32.010Z,1543933052.010 [Default:CheckIn] Stopped 2018-12-04T14:17:32.011Z,1543933052.011 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T14:17:32.011Z,1543933052.011 [Default:CheckIn](INFO): Running loop #100 2018-12-04T14:17:32.011Z,1543933052.011 [Default:CheckIn] Running Loop=100 2018-12-04T14:17:32.011Z,1543933052.011 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T14:17:32.011Z,1543933052.011 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T14:17:32.775Z,1543933052.775 [NAL9602](INFO): Powering up 2018-12-04T14:17:43.976Z,1543933063.976 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:18:15.936Z,1543933095.936 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T14:18:16.014Z,1543933096.014 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T14:18:16.014Z,1543933096.014 [NAL9602] Data Fault, FailCount= 1 2018-12-04T14:18:16.014Z,1543933096.014 [NAL9602](ERROR): Data Fault 2018-12-04T14:18:16.052Z,1543933096.052 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:18:16.335Z,1543933096.335 [NAL9602](INFO): Powering down 2018-12-04T14:18:17.191Z,1543933097.191 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:18:17.191Z,1543933097.191 [NAL9602] No Fault, FailCount= 1 2018-12-04T14:18:46.708Z,1543933126.708 [NAL9602](INFO): Powering up NAL9602 2018-12-04T14:18:57.908Z,1543933137.908 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:19:22.102Z,1543933162.102 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:19:22.102Z,1543933162.102 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-04T14:19:22.103Z,1543933162.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:19:22.105Z,1543933162.105 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:19:22.105Z,1543933162.105 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-04T14:19:22.105Z,1543933162.105 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:19:22.155Z,1543933162.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:19:22.155Z,1543933162.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:19:22.518Z,1543933162.518 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:19:22.518Z,1543933162.518 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-04T14:19:22.519Z,1543933162.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:19:22.519Z,1543933162.519 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-04T14:19:22.906Z,1543933162.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:19:22.906Z,1543933162.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:19:22.907Z,1543933162.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:19:22.907Z,1543933162.907 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:19:22.907Z,1543933162.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:19:22.908Z,1543933162.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:21:22.967Z,1543933282.967 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:21:22.967Z,1543933282.967 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-04T14:21:22.967Z,1543933282.967 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:21:22.969Z,1543933282.969 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:21:22.969Z,1543933282.969 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-04T14:21:22.969Z,1543933282.969 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:21:22.984Z,1543933282.984 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:21:22.984Z,1543933282.984 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:21:23.382Z,1543933283.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:21:23.382Z,1543933283.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-04T14:21:23.383Z,1543933283.383 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:21:23.383Z,1543933283.383 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-04T14:21:23.778Z,1543933283.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:21:23.778Z,1543933283.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:21:23.779Z,1543933283.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:21:23.779Z,1543933283.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:21:23.779Z,1543933283.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:21:23.780Z,1543933283.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:21:28.931Z,1543933288.931 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T14:21:28.931Z,1543933288.931 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T14:21:28.931Z,1543933288.931 [DropWeight](ERROR): Hardware Fault 2018-12-04T14:21:29.011Z,1543933289.011 [CBIT](INFO): Critical error at 20181204T142128 2018-12-04T14:21:29.014Z,1543933289.014 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T14:21:29.015Z,1543933289.015 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T14:21:29.395Z,1543933289.395 [CBIT](INFO): Critical error at 20181204T142129 2018-12-04T14:22:33.270Z,1543933353.270 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T14:17:32.0Z 2018-12-04T14:22:33.270Z,1543933353.270 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T14:22:33.271Z,1543933353.271 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T14:22:38.760Z,1543933358.760 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0297.lzma 2018-12-04T14:22:39.957Z,1543933359.957 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0297.lzma.bak 2018-12-04T14:22:39.957Z,1543933359.957 [DataOverHttps](INFO): SBD MOMSN=8964727 2018-12-04T14:22:49.182Z,1543933369.182 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T14:22:49.256Z,1543933369.256 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0298.lzma 2018-12-04T14:22:50.029Z,1543933370.029 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0298.lzma.bak 2018-12-04T14:22:50.029Z,1543933370.029 [DataOverHttps](INFO): SBD MOMSN=8964731 2018-12-04T14:22:51.355Z,1543933371.355 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T14:22:51.355Z,1543933371.355 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T14:22:51.355Z,1543933371.355 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T14:23:19.475Z,1543933399.475 [NAL9602](INFO): Powering down 2018-12-04T14:23:23.905Z,1543933403.905 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:23:23.906Z,1543933403.906 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-04T14:23:23.906Z,1543933403.906 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:23:23.908Z,1543933403.908 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:23:23.908Z,1543933403.908 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-04T14:23:23.908Z,1543933403.908 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:23:23.921Z,1543933403.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:23:23.922Z,1543933403.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:23:24.314Z,1543933404.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:23:24.314Z,1543933404.314 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-04T14:23:24.315Z,1543933404.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:23:24.315Z,1543933404.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-04T14:23:24.713Z,1543933404.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:23:24.714Z,1543933404.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:23:24.714Z,1543933404.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:23:24.715Z,1543933404.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:23:24.716Z,1543933404.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:23:24.716Z,1543933404.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:25:25.098Z,1543933525.098 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:25:25.098Z,1543933525.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-04T14:25:25.098Z,1543933525.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:25:25.100Z,1543933525.100 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:25:25.100Z,1543933525.100 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-04T14:25:25.101Z,1543933525.101 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:25:25.114Z,1543933525.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:25:25.114Z,1543933525.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:25:25.513Z,1543933525.513 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:25:25.513Z,1543933525.513 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-04T14:25:25.514Z,1543933525.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:25:25.514Z,1543933525.514 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-04T14:25:25.897Z,1543933525.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:25:25.897Z,1543933525.897 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:25:25.897Z,1543933525.897 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:25:25.898Z,1543933525.898 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:25:25.899Z,1543933525.899 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:25:25.899Z,1543933525.899 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:27:26.266Z,1543933646.266 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:27:26.266Z,1543933646.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-04T14:27:26.266Z,1543933646.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:27:26.268Z,1543933646.268 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:27:26.268Z,1543933646.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-04T14:27:26.269Z,1543933646.269 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:27:26.283Z,1543933646.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:27:26.283Z,1543933646.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:27:26.671Z,1543933646.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:27:26.671Z,1543933646.671 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-04T14:27:26.672Z,1543933646.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:27:26.672Z,1543933646.672 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-04T14:27:27.061Z,1543933647.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:27:27.061Z,1543933647.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:27:27.061Z,1543933647.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:27:27.062Z,1543933647.062 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:27:27.062Z,1543933647.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:27:27.063Z,1543933647.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:27:51.829Z,1543933671.829 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T14:27:51.830Z,1543933671.830 [Default:CheckIn:C.Wait] Stopped 2018-12-04T14:27:51.830Z,1543933671.830 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T14:27:51.830Z,1543933671.830 [Default:CheckIn:D] Running Loop=1 2018-12-04T14:27:52.222Z,1543933672.222 [Default:CheckIn:D] Stopped 2018-12-04T14:27:52.223Z,1543933672.223 [Default:CheckIn:E] Running Loop=1 2018-12-04T14:27:52.635Z,1543933672.635 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1033.003320 min 2018-12-04T14:27:52.635Z,1543933672.635 [Default:CheckIn:E] Stopped 2018-12-04T14:27:52.635Z,1543933672.635 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T14:27:52.635Z,1543933672.635 [Default:CheckIn] Stopped 2018-12-04T14:27:52.635Z,1543933672.635 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T14:27:52.635Z,1543933672.635 [Default:CheckIn](INFO): Running loop #101 2018-12-04T14:27:52.635Z,1543933672.635 [Default:CheckIn] Running Loop=101 2018-12-04T14:27:52.636Z,1543933672.636 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T14:27:52.636Z,1543933672.636 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T14:27:53.396Z,1543933673.396 [NAL9602](INFO): Powering up 2018-12-04T14:28:04.595Z,1543933684.595 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:28:05.393Z,1543933685.393 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T14:28:05.393Z,1543933685.393 [NAL9602] Data Fault, FailCount= 2 2018-12-04T14:28:05.394Z,1543933685.394 [NAL9602](ERROR): Data Fault 2018-12-04T14:28:05.454Z,1543933685.454 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:28:05.795Z,1543933685.795 [NAL9602](INFO): Powering down 2018-12-04T14:28:06.646Z,1543933686.646 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:28:06.646Z,1543933686.646 [NAL9602] No Fault, FailCount= 2 2018-12-04T14:28:35.911Z,1543933715.911 [NAL9602](INFO): Powering up NAL9602 2018-12-04T14:28:47.520Z,1543933727.520 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:29:27.207Z,1543933767.207 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:29:27.207Z,1543933767.207 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-04T14:29:27.207Z,1543933767.207 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:29:27.209Z,1543933767.209 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:29:27.209Z,1543933767.209 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-04T14:29:27.210Z,1543933767.210 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:29:27.223Z,1543933767.223 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:29:27.224Z,1543933767.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:29:27.624Z,1543933767.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:29:27.624Z,1543933767.624 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-04T14:29:27.625Z,1543933767.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:29:27.625Z,1543933767.625 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-04T14:29:27.993Z,1543933767.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:29:27.993Z,1543933767.993 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:29:27.994Z,1543933767.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:29:27.994Z,1543933767.994 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:29:27.995Z,1543933767.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:29:27.995Z,1543933767.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:31:28.070Z,1543933888.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:31:28.071Z,1543933888.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-04T14:31:28.071Z,1543933888.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:31:28.073Z,1543933888.073 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:31:28.073Z,1543933888.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-04T14:31:28.073Z,1543933888.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:31:28.086Z,1543933888.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:31:28.087Z,1543933888.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:31:28.489Z,1543933888.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:31:28.489Z,1543933888.489 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-04T14:31:28.490Z,1543933888.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:31:28.490Z,1543933888.490 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-04T14:31:28.877Z,1543933888.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:31:28.878Z,1543933888.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:31:28.878Z,1543933888.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:31:28.879Z,1543933888.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:31:28.879Z,1543933888.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:31:28.879Z,1543933888.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:32:53.699Z,1543933973.699 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T14:27:52.6Z 2018-12-04T14:32:53.700Z,1543933973.700 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T14:32:53.700Z,1543933973.700 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T14:32:59.375Z,1543933979.375 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0300.lzma 2018-12-04T14:33:00.173Z,1543933980.173 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0300.lzma.bak 2018-12-04T14:33:00.173Z,1543933980.173 [DataOverHttps](INFO): SBD MOMSN=8964760 2018-12-04T14:33:10.192Z,1543933990.192 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0301.lzma 2018-12-04T14:33:10.989Z,1543933990.989 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0301.lzma.bak 2018-12-04T14:33:10.989Z,1543933990.989 [DataOverHttps](INFO): SBD MOMSN=8964762 2018-12-04T14:33:12.308Z,1543933992.308 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T14:33:12.309Z,1543933992.309 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T14:33:12.309Z,1543933992.309 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T14:33:29.158Z,1543934009.158 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:33:29.158Z,1543934009.158 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-04T14:33:29.158Z,1543934009.158 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:33:29.160Z,1543934009.160 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:33:29.160Z,1543934009.160 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-04T14:33:29.161Z,1543934009.161 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:33:29.174Z,1543934009.174 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:33:29.175Z,1543934009.175 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:33:29.573Z,1543934009.573 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:33:29.573Z,1543934009.573 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-04T14:33:29.574Z,1543934009.574 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:33:29.574Z,1543934009.574 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-04T14:33:29.961Z,1543934009.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:33:29.962Z,1543934009.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:33:29.962Z,1543934009.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:33:29.962Z,1543934009.962 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:33:29.963Z,1543934009.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:33:29.963Z,1543934009.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:33:51.254Z,1543934031.254 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T14:34:21.703Z,1543934061.703 [NAL9602](INFO): Powering down 2018-12-04T14:35:30.155Z,1543934130.155 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:35:30.155Z,1543934130.155 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-04T14:35:30.155Z,1543934130.155 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:35:30.157Z,1543934130.157 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:35:30.157Z,1543934130.157 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-04T14:35:30.157Z,1543934130.157 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:35:30.222Z,1543934130.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:35:30.223Z,1543934130.223 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:35:30.560Z,1543934130.560 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:35:30.560Z,1543934130.560 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-04T14:35:30.561Z,1543934130.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:35:30.561Z,1543934130.561 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-04T14:35:30.962Z,1543934130.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:35:30.978Z,1543934130.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:35:30.979Z,1543934130.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:35:30.979Z,1543934130.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:35:30.979Z,1543934130.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:35:30.980Z,1543934130.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:36:28.933Z,1543934188.933 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T14:36:28.933Z,1543934188.933 [DropWeight] No Fault, FailCount= 1 2018-12-04T14:37:31.354Z,1543934251.354 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:37:31.354Z,1543934251.354 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-04T14:37:31.354Z,1543934251.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:37:31.356Z,1543934251.356 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:37:31.357Z,1543934251.357 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-04T14:37:31.357Z,1543934251.357 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:37:31.370Z,1543934251.370 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:37:31.370Z,1543934251.370 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:37:31.780Z,1543934251.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:37:31.780Z,1543934251.780 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-04T14:37:31.780Z,1543934251.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:37:31.781Z,1543934251.781 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-04T14:37:32.148Z,1543934252.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:37:32.148Z,1543934252.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:37:32.148Z,1543934252.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:37:32.149Z,1543934252.149 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:37:32.149Z,1543934252.149 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:37:32.150Z,1543934252.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:38:12.557Z,1543934292.557 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T14:38:12.557Z,1543934292.557 [Default:CheckIn:C.Wait] Stopped 2018-12-04T14:38:12.557Z,1543934292.557 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T14:38:12.557Z,1543934292.557 [Default:CheckIn:D] Running Loop=1 2018-12-04T14:38:12.934Z,1543934292.934 [Default:CheckIn:D] Stopped 2018-12-04T14:38:12.934Z,1543934292.934 [Default:CheckIn:E] Running Loop=1 2018-12-04T14:38:13.363Z,1543934293.363 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1043.348503 min 2018-12-04T14:38:13.363Z,1543934293.363 [Default:CheckIn:E] Stopped 2018-12-04T14:38:13.363Z,1543934293.363 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T14:38:13.363Z,1543934293.363 [Default:CheckIn] Stopped 2018-12-04T14:38:13.363Z,1543934293.363 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T14:38:13.363Z,1543934293.363 [Default:CheckIn](INFO): Running loop #102 2018-12-04T14:38:13.363Z,1543934293.363 [Default:CheckIn] Running Loop=102 2018-12-04T14:38:13.364Z,1543934293.364 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T14:38:13.364Z,1543934293.364 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T14:38:14.105Z,1543934294.105 [NAL9602](INFO): Powering up 2018-12-04T14:38:24.911Z,1543934304.911 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:38:56.606Z,1543934336.606 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T14:38:56.678Z,1543934336.678 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T14:38:56.679Z,1543934336.679 [NAL9602] Data Fault, FailCount= 3 2018-12-04T14:38:56.679Z,1543934336.679 [NAL9602](ERROR): Data Fault 2018-12-04T14:38:56.713Z,1543934336.713 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:38:57.008Z,1543934337.008 [NAL9602](INFO): Powering down 2018-12-04T14:38:57.851Z,1543934337.851 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:38:57.851Z,1543934337.851 [NAL9602] No Fault, FailCount= 3 2018-12-04T14:39:27.372Z,1543934367.372 [NAL9602](INFO): Powering up NAL9602 2018-12-04T14:39:32.186Z,1543934372.186 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:39:32.187Z,1543934372.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-04T14:39:32.187Z,1543934372.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:39:32.189Z,1543934372.189 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:39:32.189Z,1543934372.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-04T14:39:32.189Z,1543934372.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:39:32.240Z,1543934372.240 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:39:32.240Z,1543934372.240 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:39:32.624Z,1543934372.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:39:32.624Z,1543934372.624 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-04T14:39:32.625Z,1543934372.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:39:32.625Z,1543934372.625 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-04T14:39:32.990Z,1543934372.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:39:32.991Z,1543934372.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:39:32.991Z,1543934372.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:39:32.991Z,1543934372.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:39:32.992Z,1543934372.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:39:32.992Z,1543934372.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:39:38.568Z,1543934378.568 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:39:39.368Z,1543934379.368 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T14:39:39.368Z,1543934379.368 [NAL9602] Data Fault, FailCount= 4 2018-12-04T14:39:39.368Z,1543934379.368 [NAL9602](ERROR): Data Fault 2018-12-04T14:39:39.433Z,1543934379.433 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:39:39.772Z,1543934379.772 [NAL9602](INFO): Powering down 2018-12-04T14:39:43.300Z,1543934383.300 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:39:43.300Z,1543934383.300 [NAL9602] No Fault, FailCount= 4 2018-12-04T14:40:10.119Z,1543934410.119 [NAL9602](INFO): Powering up NAL9602 2018-12-04T14:40:21.264Z,1543934421.264 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:41:33.094Z,1543934493.094 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:41:33.094Z,1543934493.094 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-04T14:41:33.094Z,1543934493.094 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:41:33.096Z,1543934493.096 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:41:33.097Z,1543934493.097 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-04T14:41:33.097Z,1543934493.097 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:41:33.110Z,1543934493.110 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:41:33.146Z,1543934493.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:41:33.502Z,1543934493.502 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:41:33.502Z,1543934493.502 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-04T14:41:33.503Z,1543934493.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:41:33.503Z,1543934493.503 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-04T14:41:33.902Z,1543934493.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:41:33.903Z,1543934493.903 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:41:33.903Z,1543934493.903 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:41:33.903Z,1543934493.903 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:41:33.904Z,1543934493.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:41:33.904Z,1543934493.904 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:43:14.568Z,1543934594.568 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T14:38:13.4Z 2018-12-04T14:43:14.568Z,1543934594.568 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T14:43:14.568Z,1543934594.568 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T14:43:15.500Z,1543934595.500 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0303.lzma 2018-12-04T14:43:15.997Z,1543934595.997 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0303.lzma.bak 2018-12-04T14:43:15.997Z,1543934595.997 [DataOverHttps](INFO): SBD MOMSN=8964795 2018-12-04T14:43:26.316Z,1543934606.316 [DataOverHttps](INFO): Sending 345 bytes from file Logs/20181203T211451/Express0304.lzma 2018-12-04T14:43:27.514Z,1543934607.514 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0304.lzma.bak 2018-12-04T14:43:27.515Z,1543934607.515 [DataOverHttps](INFO): SBD MOMSN=8964797 2018-12-04T14:43:28.783Z,1543934608.783 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T14:43:28.806Z,1543934608.806 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T14:43:28.806Z,1543934608.806 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T14:43:28.806Z,1543934608.806 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T14:43:34.030Z,1543934614.030 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:43:34.030Z,1543934614.030 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-04T14:43:34.030Z,1543934614.030 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:43:34.032Z,1543934614.032 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:43:34.033Z,1543934614.033 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-04T14:43:34.033Z,1543934614.033 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:43:34.046Z,1543934614.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:43:34.046Z,1543934614.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:43:34.438Z,1543934614.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:43:34.438Z,1543934614.438 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-04T14:43:34.439Z,1543934614.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:43:34.439Z,1543934614.439 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-04T14:43:34.828Z,1543934614.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:43:34.829Z,1543934614.829 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:43:34.829Z,1543934614.829 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:43:34.829Z,1543934614.829 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:43:34.830Z,1543934614.830 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:43:34.831Z,1543934614.831 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:43:59.204Z,1543934639.204 [NAL9602](INFO): Powering down 2018-12-04T14:44:33.320Z,1543934673.320 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=60.123569 2018-12-04T14:44:45.351Z,1543934685.351 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002728 2018-12-04T14:45:35.005Z,1543934735.005 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:45:35.005Z,1543934735.005 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-04T14:45:35.005Z,1543934735.005 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:45:35.008Z,1543934735.008 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:45:35.008Z,1543934735.008 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-04T14:45:35.008Z,1543934735.008 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:45:35.022Z,1543934735.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:45:35.022Z,1543934735.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:45:35.418Z,1543934735.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:45:35.418Z,1543934735.418 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-04T14:45:35.419Z,1543934735.419 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:45:35.419Z,1543934735.419 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-04T14:45:35.798Z,1543934735.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:45:35.799Z,1543934735.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:45:35.799Z,1543934735.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:45:35.800Z,1543934735.800 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:45:35.800Z,1543934735.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:45:35.800Z,1543934735.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:47:38.925Z,1543934858.925 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:47:38.925Z,1543934858.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-04T14:47:38.925Z,1543934858.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:47:38.927Z,1543934858.927 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:47:38.927Z,1543934858.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-04T14:47:38.927Z,1543934858.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:47:38.944Z,1543934858.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:47:38.945Z,1543934858.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:47:39.080Z,1543934859.080 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:47:39.080Z,1543934859.080 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-04T14:47:39.081Z,1543934859.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:47:39.081Z,1543934859.081 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-04T14:47:39.390Z,1543934859.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:47:39.390Z,1543934859.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:47:39.391Z,1543934859.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:47:39.391Z,1543934859.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:47:39.391Z,1543934859.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:47:39.392Z,1543934859.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:48:28.968Z,1543934908.968 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T14:48:28.968Z,1543934908.968 [Default:CheckIn:C.Wait] Stopped 2018-12-04T14:48:28.968Z,1543934908.968 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T14:48:28.968Z,1543934908.968 [Default:CheckIn:D] Running Loop=1 2018-12-04T14:48:29.366Z,1543934909.366 [Default:CheckIn:D] Stopped 2018-12-04T14:48:29.366Z,1543934909.366 [Default:CheckIn:E] Running Loop=1 2018-12-04T14:48:29.767Z,1543934909.767 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1053.622396 min 2018-12-04T14:48:29.767Z,1543934909.767 [Default:CheckIn:E] Stopped 2018-12-04T14:48:29.767Z,1543934909.767 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T14:48:29.767Z,1543934909.767 [Default:CheckIn] Stopped 2018-12-04T14:48:29.767Z,1543934909.767 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T14:48:29.768Z,1543934909.768 [Default:CheckIn](INFO): Running loop #103 2018-12-04T14:48:29.768Z,1543934909.768 [Default:CheckIn] Running Loop=103 2018-12-04T14:48:29.768Z,1543934909.768 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T14:48:29.768Z,1543934909.768 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T14:48:30.521Z,1543934910.521 [NAL9602](INFO): Powering up 2018-12-04T14:48:41.328Z,1543934921.328 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:49:13.096Z,1543934953.096 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T14:49:13.174Z,1543934953.174 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T14:49:13.174Z,1543934953.174 [NAL9602] Data Fault, FailCount= 5 2018-12-04T14:49:13.175Z,1543934953.175 [NAL9602](ERROR): Data Fault 2018-12-04T14:49:13.245Z,1543934953.245 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:49:13.245Z,1543934953.245 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T14:49:13.496Z,1543934953.496 [NAL9602](INFO): Powering down 2018-12-04T14:49:13.547Z,1543934953.547 [CBIT](INFO): Critical error at 20181204T144913 2018-12-04T14:49:39.487Z,1543934979.487 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:49:39.487Z,1543934979.487 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-04T14:49:39.487Z,1543934979.487 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:49:39.489Z,1543934979.489 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:49:39.489Z,1543934979.489 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-04T14:49:39.489Z,1543934979.489 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:49:39.502Z,1543934979.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:49:39.503Z,1543934979.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:49:39.902Z,1543934979.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:49:39.902Z,1543934979.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-04T14:49:39.903Z,1543934979.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:49:39.903Z,1543934979.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-04T14:49:40.282Z,1543934980.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:49:40.282Z,1543934980.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:49:40.283Z,1543934980.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:49:40.283Z,1543934980.283 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:49:40.284Z,1543934980.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:49:40.284Z,1543934980.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:51:13.533Z,1543935073.533 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:51:13.533Z,1543935073.533 [NAL9602] No Fault, FailCount= 5 2018-12-04T14:51:13.900Z,1543935073.900 [NAL9602](INFO): Powering up NAL9602 2018-12-04T14:51:25.092Z,1543935085.092 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:51:25.892Z,1543935085.892 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T14:51:25.892Z,1543935085.892 [NAL9602] Data Fault, FailCount= 1 2018-12-04T14:51:25.892Z,1543935085.892 [NAL9602](ERROR): Data Fault 2018-12-04T14:51:25.957Z,1543935085.957 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:51:26.292Z,1543935086.292 [NAL9602](INFO): Powering down 2018-12-04T14:51:27.131Z,1543935087.131 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:51:27.131Z,1543935087.131 [NAL9602] No Fault, FailCount= 1 2018-12-04T14:51:40.317Z,1543935100.317 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:51:40.317Z,1543935100.317 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-04T14:51:40.317Z,1543935100.317 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:51:40.319Z,1543935100.319 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:51:40.319Z,1543935100.319 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-04T14:51:40.320Z,1543935100.320 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:51:40.333Z,1543935100.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:51:40.333Z,1543935100.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:51:40.730Z,1543935100.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:51:40.730Z,1543935100.730 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-04T14:51:40.731Z,1543935100.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:51:40.731Z,1543935100.731 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-04T14:51:41.122Z,1543935101.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:51:41.123Z,1543935101.123 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:51:41.124Z,1543935101.124 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:51:41.124Z,1543935101.124 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:51:41.124Z,1543935101.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:51:41.125Z,1543935101.125 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:51:56.357Z,1543935116.357 [NAL9602](INFO): Powering up NAL9602 2018-12-04T14:52:07.567Z,1543935127.567 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:53:31.166Z,1543935211.166 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T14:48:29.8Z 2018-12-04T14:53:31.167Z,1543935211.167 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T14:53:31.167Z,1543935211.167 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T14:53:36.106Z,1543935216.106 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0306.lzma 2018-12-04T14:53:36.901Z,1543935216.901 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0306.lzma.bak 2018-12-04T14:53:36.901Z,1543935216.901 [DataOverHttps](INFO): SBD MOMSN=8964825 2018-12-04T14:53:41.439Z,1543935221.439 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:53:41.439Z,1543935221.439 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-04T14:53:41.439Z,1543935221.439 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:53:41.441Z,1543935221.441 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:53:41.441Z,1543935221.441 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-04T14:53:41.441Z,1543935221.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:53:41.455Z,1543935221.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:53:41.455Z,1543935221.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:53:41.583Z,1543935221.583 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:53:41.583Z,1543935221.583 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-04T14:53:41.584Z,1543935221.584 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:53:41.584Z,1543935221.584 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-04T14:53:41.906Z,1543935221.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:53:41.906Z,1543935221.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:53:41.907Z,1543935221.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:53:41.907Z,1543935221.907 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:53:41.907Z,1543935221.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:53:41.908Z,1543935221.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:53:46.169Z,1543935226.169 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T14:53:46.628Z,1543935226.628 [DataOverHttps](INFO): Sending 344 bytes from file Logs/20181203T211451/Express0307.lzma 2018-12-04T14:53:47.425Z,1543935227.425 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0307.lzma.bak 2018-12-04T14:53:47.426Z,1543935227.425 [DataOverHttps](INFO): SBD MOMSN=8964828 2018-12-04T14:53:48.871Z,1543935228.871 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T14:53:48.871Z,1543935228.871 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T14:53:48.871Z,1543935228.871 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T14:54:16.616Z,1543935256.616 [NAL9602](INFO): Powering down 2018-12-04T14:55:42.186Z,1543935342.186 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:55:42.186Z,1543935342.186 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-04T14:55:42.186Z,1543935342.186 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:55:42.188Z,1543935342.188 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:55:42.188Z,1543935342.188 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-04T14:55:42.189Z,1543935342.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:55:42.202Z,1543935342.202 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:55:42.202Z,1543935342.202 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:55:42.600Z,1543935342.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:55:42.600Z,1543935342.600 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-04T14:55:42.601Z,1543935342.601 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:55:42.601Z,1543935342.601 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-04T14:55:42.986Z,1543935342.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:55:42.986Z,1543935342.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:55:42.987Z,1543935342.987 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:55:42.987Z,1543935342.987 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:55:42.987Z,1543935342.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:55:42.988Z,1543935342.988 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:57:43.070Z,1543935463.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:57:43.070Z,1543935463.070 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-04T14:57:43.070Z,1543935463.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:57:43.072Z,1543935463.072 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:57:43.072Z,1543935463.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-04T14:57:43.072Z,1543935463.072 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:57:43.085Z,1543935463.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:57:43.086Z,1543935463.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:57:43.486Z,1543935463.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:57:43.486Z,1543935463.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-04T14:57:43.486Z,1543935463.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:57:43.486Z,1543935463.486 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-04T14:57:43.870Z,1543935463.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:57:43.871Z,1543935463.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:57:43.871Z,1543935463.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:57:43.872Z,1543935463.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:57:43.872Z,1543935463.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:57:43.872Z,1543935463.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:58:49.370Z,1543935529.370 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T14:58:49.370Z,1543935529.370 [Default:CheckIn:C.Wait] Stopped 2018-12-04T14:58:49.370Z,1543935529.370 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T14:58:49.370Z,1543935529.370 [Default:CheckIn:D] Running Loop=1 2018-12-04T14:58:49.768Z,1543935529.768 [Default:CheckIn:D] Stopped 2018-12-04T14:58:49.768Z,1543935529.768 [Default:CheckIn:E] Running Loop=1 2018-12-04T14:58:50.175Z,1543935530.175 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1063.962435 min 2018-12-04T14:58:50.175Z,1543935530.175 [Default:CheckIn:E] Stopped 2018-12-04T14:58:50.175Z,1543935530.175 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T14:58:50.175Z,1543935530.175 [Default:CheckIn] Stopped 2018-12-04T14:58:50.175Z,1543935530.175 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T14:58:50.176Z,1543935530.176 [Default:CheckIn](INFO): Running loop #104 2018-12-04T14:58:50.176Z,1543935530.176 [Default:CheckIn] Running Loop=104 2018-12-04T14:58:50.176Z,1543935530.176 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T14:58:50.176Z,1543935530.176 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T14:58:50.943Z,1543935530.943 [NAL9602](INFO): Powering up 2018-12-04T14:59:01.740Z,1543935541.740 [NAL9602](INFO): NAL9602 initialized 2018-12-04T14:59:33.750Z,1543935573.750 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T14:59:33.834Z,1543935573.834 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T14:59:33.834Z,1543935573.834 [NAL9602] Data Fault, FailCount= 2 2018-12-04T14:59:33.834Z,1543935573.834 [NAL9602](ERROR): Data Fault 2018-12-04T14:59:33.867Z,1543935573.867 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T14:59:34.156Z,1543935574.156 [NAL9602](INFO): Powering down 2018-12-04T14:59:35.007Z,1543935575.007 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T14:59:35.007Z,1543935575.007 [NAL9602] No Fault, FailCount= 2 2018-12-04T14:59:44.459Z,1543935584.459 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:59:44.460Z,1543935584.460 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-04T14:59:44.460Z,1543935584.460 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T14:59:44.462Z,1543935584.462 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T14:59:44.462Z,1543935584.462 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-04T14:59:44.462Z,1543935584.462 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T14:59:44.475Z,1543935584.475 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T14:59:44.475Z,1543935584.475 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T14:59:44.597Z,1543935584.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T14:59:44.597Z,1543935584.597 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-04T14:59:44.598Z,1543935584.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T14:59:44.598Z,1543935584.598 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-04T14:59:44.908Z,1543935584.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T14:59:44.909Z,1543935584.909 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:59:44.909Z,1543935584.909 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T14:59:44.910Z,1543935584.910 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T14:59:44.910Z,1543935584.910 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T14:59:44.910Z,1543935584.910 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:00:04.488Z,1543935604.488 [NAL9602](INFO): Powering up NAL9602 2018-12-04T15:00:15.688Z,1543935615.688 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:01:45.033Z,1543935705.033 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:01:45.033Z,1543935705.033 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-04T15:01:45.033Z,1543935705.033 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:01:45.036Z,1543935705.036 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:01:45.036Z,1543935705.036 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-04T15:01:45.036Z,1543935705.036 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:01:45.049Z,1543935705.049 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:01:45.050Z,1543935705.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:01:45.450Z,1543935705.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:01:45.451Z,1543935705.451 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-04T15:01:45.451Z,1543935705.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:01:45.451Z,1543935705.451 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-04T15:01:45.838Z,1543935705.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:01:45.838Z,1543935705.838 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:01:45.839Z,1543935705.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:01:45.839Z,1543935705.839 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:01:45.839Z,1543935705.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:01:45.840Z,1543935705.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:03:46.115Z,1543935826.115 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:03:46.115Z,1543935826.115 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-04T15:03:46.115Z,1543935826.115 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:03:46.117Z,1543935826.117 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:03:46.117Z,1543935826.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-04T15:03:46.117Z,1543935826.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:03:46.131Z,1543935826.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:03:46.131Z,1543935826.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:03:46.526Z,1543935826.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:03:46.526Z,1543935826.526 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-04T15:03:46.526Z,1543935826.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:03:46.526Z,1543935826.526 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-04T15:03:46.910Z,1543935826.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:03:46.911Z,1543935826.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:03:46.911Z,1543935826.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:03:46.912Z,1543935826.912 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:03:46.912Z,1543935826.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:03:46.912Z,1543935826.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:03:51.056Z,1543935831.056 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T14:58:50.2Z 2018-12-04T15:03:51.056Z,1543935831.056 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T15:03:51.056Z,1543935831.056 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T15:03:56.032Z,1543935836.032 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0309.lzma 2018-12-04T15:03:56.833Z,1543935836.833 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0309.lzma.bak 2018-12-04T15:03:56.833Z,1543935836.833 [DataOverHttps](INFO): SBD MOMSN=8964861 2018-12-04T15:04:07.194Z,1543935847.194 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T15:04:07.262Z,1543935847.262 [DataOverHttps](INFO): Sending 335 bytes from file Logs/20181203T211451/Express0310.lzma 2018-12-04T15:04:08.041Z,1543935848.041 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0310.lzma.bak 2018-12-04T15:04:08.041Z,1543935848.041 [DataOverHttps](INFO): SBD MOMSN=8964863 2018-12-04T15:04:09.384Z,1543935849.384 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T15:04:09.384Z,1543935849.384 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T15:04:09.384Z,1543935849.384 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T15:04:37.447Z,1543935877.447 [NAL9602](INFO): Powering down 2018-12-04T15:05:46.950Z,1543935946.950 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:05:46.950Z,1543935946.950 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-04T15:05:46.950Z,1543935946.950 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:05:46.953Z,1543935946.953 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:05:46.953Z,1543935946.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-04T15:05:46.953Z,1543935946.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:05:47.009Z,1543935947.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:05:47.009Z,1543935947.009 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:05:47.394Z,1543935947.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:05:47.394Z,1543935947.394 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-04T15:05:47.395Z,1543935947.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:05:47.395Z,1543935947.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-04T15:05:47.745Z,1543935947.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:05:47.745Z,1543935947.745 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:05:47.746Z,1543935947.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:05:47.746Z,1543935947.746 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:05:47.746Z,1543935947.746 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:05:47.747Z,1543935947.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:06:30.223Z,1543935990.223 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T15:06:30.223Z,1543935990.223 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T15:06:30.223Z,1543935990.223 [DropWeight](ERROR): Hardware Fault 2018-12-04T15:06:30.350Z,1543935990.350 [CBIT](INFO): Critical error at 20181204T150630 2018-12-04T15:06:30.353Z,1543935990.353 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T15:06:30.353Z,1543935990.353 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T15:06:30.710Z,1543935990.710 [CBIT](INFO): Critical error at 20181204T150630 2018-12-04T15:07:47.987Z,1543936067.987 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:07:47.987Z,1543936067.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-04T15:07:47.987Z,1543936067.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:07:47.989Z,1543936067.989 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:07:47.989Z,1543936067.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-04T15:07:47.989Z,1543936067.989 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:07:48.003Z,1543936068.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:07:48.003Z,1543936068.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:07:48.393Z,1543936068.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:07:48.394Z,1543936068.394 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-04T15:07:48.394Z,1543936068.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:07:48.394Z,1543936068.394 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-04T15:07:48.786Z,1543936068.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:07:48.787Z,1543936068.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:07:48.787Z,1543936068.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:07:48.787Z,1543936068.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:07:48.788Z,1543936068.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:07:48.788Z,1543936068.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:09:09.654Z,1543936149.654 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T15:09:09.654Z,1543936149.654 [Default:CheckIn:C.Wait] Stopped 2018-12-04T15:09:09.654Z,1543936149.654 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T15:09:09.654Z,1543936149.654 [Default:CheckIn:D] Running Loop=1 2018-12-04T15:09:10.059Z,1543936150.059 [Default:CheckIn:D] Stopped 2018-12-04T15:09:10.059Z,1543936150.059 [Default:CheckIn:E] Running Loop=1 2018-12-04T15:09:10.459Z,1543936150.459 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1074.300651 min 2018-12-04T15:09:10.459Z,1543936150.459 [Default:CheckIn:E] Stopped 2018-12-04T15:09:10.460Z,1543936150.460 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T15:09:10.460Z,1543936150.460 [Default:CheckIn] Stopped 2018-12-04T15:09:10.460Z,1543936150.460 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T15:09:10.460Z,1543936150.460 [Default:CheckIn](INFO): Running loop #105 2018-12-04T15:09:10.460Z,1543936150.460 [Default:CheckIn] Running Loop=105 2018-12-04T15:09:10.460Z,1543936150.460 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T15:09:10.460Z,1543936150.460 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T15:09:11.223Z,1543936151.223 [NAL9602](INFO): Powering up 2018-12-04T15:09:22.427Z,1543936162.427 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:09:23.228Z,1543936163.228 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T15:09:23.228Z,1543936163.228 [NAL9602] Data Fault, FailCount= 3 2018-12-04T15:09:23.228Z,1543936163.228 [NAL9602](ERROR): Data Fault 2018-12-04T15:09:23.294Z,1543936163.294 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T15:09:23.623Z,1543936163.623 [NAL9602](INFO): Powering down 2018-12-04T15:09:24.467Z,1543936164.467 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T15:09:24.467Z,1543936164.467 [NAL9602] No Fault, FailCount= 3 2018-12-04T15:09:48.970Z,1543936188.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:09:48.971Z,1543936188.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-04T15:09:48.971Z,1543936188.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:09:48.973Z,1543936188.973 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:09:48.973Z,1543936188.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-04T15:09:48.973Z,1543936188.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:09:49.015Z,1543936189.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:09:49.016Z,1543936189.016 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:09:49.378Z,1543936189.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:09:49.378Z,1543936189.378 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-04T15:09:49.379Z,1543936189.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:09:49.379Z,1543936189.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-04T15:09:49.762Z,1543936189.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:09:49.763Z,1543936189.763 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:09:49.763Z,1543936189.763 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:09:49.764Z,1543936189.764 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:09:49.764Z,1543936189.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:09:49.764Z,1543936189.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:09:53.741Z,1543936193.741 [NAL9602](INFO): Powering up NAL9602 2018-12-04T15:09:56.962Z,1543936196.962 [BPC1](ERROR): BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file). 2018-12-04T15:10:06.235Z,1543936206.235 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:10:49.837Z,1543936249.837 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T15:11:51.307Z,1543936311.307 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:11:51.307Z,1543936311.307 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-04T15:11:51.307Z,1543936311.307 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:11:51.309Z,1543936311.309 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:11:51.309Z,1543936311.309 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-04T15:11:51.309Z,1543936311.309 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:11:51.354Z,1543936311.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:11:51.354Z,1543936311.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:11:51.462Z,1543936311.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:11:51.463Z,1543936311.463 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-04T15:11:51.463Z,1543936311.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:11:51.463Z,1543936311.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-04T15:11:51.814Z,1543936311.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:11:51.814Z,1543936311.814 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:11:51.815Z,1543936311.815 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:11:51.815Z,1543936311.815 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:11:51.815Z,1543936311.815 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:11:51.816Z,1543936311.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:13:51.994Z,1543936431.994 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:13:51.994Z,1543936431.994 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-04T15:13:51.994Z,1543936431.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:13:51.996Z,1543936431.996 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:13:51.997Z,1543936431.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-04T15:13:51.997Z,1543936431.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:13:52.010Z,1543936432.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:13:52.010Z,1543936432.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:13:52.414Z,1543936432.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:13:52.414Z,1543936432.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-04T15:13:52.415Z,1543936432.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:13:52.415Z,1543936432.415 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-04T15:13:52.802Z,1543936432.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:13:52.803Z,1543936432.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:13:52.803Z,1543936432.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:13:52.804Z,1543936432.804 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:13:52.804Z,1543936432.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:13:52.804Z,1543936432.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:14:12.301Z,1543936452.301 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T15:09:10.5Z 2018-12-04T15:14:12.301Z,1543936452.301 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T15:14:12.301Z,1543936452.301 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T15:14:13.176Z,1543936453.176 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20181203T211451/Courier0312.lzma 2018-12-04T15:14:14.065Z,1543936454.065 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0312.lzma.bak 2018-12-04T15:14:14.065Z,1543936454.065 [DataOverHttps](INFO): SBD MOMSN=8964890 2018-12-04T15:14:23.580Z,1543936463.580 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0313.lzma 2018-12-04T15:14:24.381Z,1543936464.381 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0313.lzma.bak 2018-12-04T15:14:24.382Z,1543936464.382 [DataOverHttps](INFO): SBD MOMSN=8964894 2018-12-04T15:14:25.688Z,1543936465.688 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T15:14:25.688Z,1543936465.688 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T15:14:25.688Z,1543936465.688 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T15:15:09.315Z,1543936509.315 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T15:15:39.781Z,1543936539.781 [NAL9602](INFO): Powering down 2018-12-04T15:15:53.070Z,1543936553.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:15:53.071Z,1543936553.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-04T15:15:53.071Z,1543936553.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:15:53.073Z,1543936553.073 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:15:53.073Z,1543936553.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-04T15:15:53.073Z,1543936553.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:15:53.086Z,1543936553.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:15:53.086Z,1543936553.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:15:53.486Z,1543936553.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:15:53.486Z,1543936553.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-04T15:15:53.487Z,1543936553.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:15:53.487Z,1543936553.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-04T15:15:53.874Z,1543936553.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:15:53.875Z,1543936553.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:15:53.875Z,1543936553.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:15:53.875Z,1543936553.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:15:53.876Z,1543936553.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:15:53.876Z,1543936553.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:17:54.194Z,1543936674.194 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:17:54.194Z,1543936674.194 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-04T15:17:54.195Z,1543936674.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:17:54.197Z,1543936674.197 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:17:54.197Z,1543936674.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-04T15:17:54.197Z,1543936674.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:17:54.210Z,1543936674.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:17:54.210Z,1543936674.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:17:54.599Z,1543936674.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:17:54.599Z,1543936674.599 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-04T15:17:54.600Z,1543936674.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:17:54.600Z,1543936674.600 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-04T15:17:54.988Z,1543936674.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:17:54.989Z,1543936674.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:17:54.989Z,1543936674.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:17:54.989Z,1543936674.989 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:17:54.990Z,1543936674.990 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:17:54.990Z,1543936674.990 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:19:25.858Z,1543936765.858 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T15:19:25.858Z,1543936765.858 [Default:CheckIn:C.Wait] Stopped 2018-12-04T15:19:25.858Z,1543936765.858 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T15:19:25.858Z,1543936765.858 [Default:CheckIn:D] Running Loop=1 2018-12-04T15:19:26.270Z,1543936766.270 [Default:CheckIn:D] Stopped 2018-12-04T15:19:26.270Z,1543936766.270 [Default:CheckIn:E] Running Loop=1 2018-12-04T15:19:26.657Z,1543936766.657 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1084.570768 min 2018-12-04T15:19:26.657Z,1543936766.657 [Default:CheckIn:E] Stopped 2018-12-04T15:19:26.657Z,1543936766.657 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T15:19:26.658Z,1543936766.658 [Default:CheckIn] Stopped 2018-12-04T15:19:26.658Z,1543936766.658 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T15:19:26.658Z,1543936766.658 [Default:CheckIn](INFO): Running loop #106 2018-12-04T15:19:26.658Z,1543936766.658 [Default:CheckIn] Running Loop=106 2018-12-04T15:19:26.658Z,1543936766.658 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T15:19:26.658Z,1543936766.658 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T15:19:27.431Z,1543936767.431 [NAL9602](INFO): Powering up 2018-12-04T15:19:38.632Z,1543936778.632 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:19:55.130Z,1543936795.130 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:19:55.130Z,1543936795.130 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-04T15:19:55.130Z,1543936795.130 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:19:55.132Z,1543936795.132 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:19:55.132Z,1543936795.132 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-04T15:19:55.133Z,1543936795.133 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:19:55.146Z,1543936795.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:19:55.146Z,1543936795.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:19:55.542Z,1543936795.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:19:55.542Z,1543936795.542 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-04T15:19:55.543Z,1543936795.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:19:55.543Z,1543936795.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-04T15:19:55.922Z,1543936795.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:19:55.927Z,1543936795.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:19:55.927Z,1543936795.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:19:55.927Z,1543936795.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:19:55.928Z,1543936795.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:19:55.928Z,1543936795.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:20:10.300Z,1543936810.300 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T15:20:10.374Z,1543936810.374 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T15:20:10.374Z,1543936810.374 [NAL9602] Data Fault, FailCount= 4 2018-12-04T15:20:10.374Z,1543936810.374 [NAL9602](ERROR): Data Fault 2018-12-04T15:20:10.441Z,1543936810.441 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T15:20:10.699Z,1543936810.699 [NAL9602](INFO): Powering down 2018-12-04T15:20:11.539Z,1543936811.539 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T15:20:11.539Z,1543936811.539 [NAL9602] No Fault, FailCount= 4 2018-12-04T15:20:41.051Z,1543936841.051 [NAL9602](INFO): Powering up NAL9602 2018-12-04T15:20:52.252Z,1543936852.252 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:20:53.050Z,1543936853.050 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T15:20:53.050Z,1543936853.050 [NAL9602] Data Fault, FailCount= 5 2018-12-04T15:20:53.050Z,1543936853.050 [NAL9602](ERROR): Data Fault 2018-12-04T15:20:53.113Z,1543936853.113 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T15:20:53.114Z,1543936853.114 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T15:20:53.455Z,1543936853.455 [NAL9602](INFO): Powering down 2018-12-04T15:20:53.519Z,1543936853.519 [CBIT](INFO): Critical error at 20181204T152053 2018-12-04T15:21:31.758Z,1543936891.758 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T15:21:31.758Z,1543936891.758 [DropWeight] No Fault, FailCount= 1 2018-12-04T15:21:56.199Z,1543936916.199 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:21:56.199Z,1543936916.199 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-04T15:21:56.199Z,1543936916.199 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:21:56.201Z,1543936916.201 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:21:56.201Z,1543936916.201 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-04T15:21:56.201Z,1543936916.201 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:21:56.215Z,1543936916.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:21:56.215Z,1543936916.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:21:56.614Z,1543936916.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:21:56.614Z,1543936916.614 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-04T15:21:56.615Z,1543936916.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:21:56.615Z,1543936916.615 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-04T15:21:56.994Z,1543936916.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:21:56.995Z,1543936916.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:21:56.995Z,1543936916.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:21:56.996Z,1543936916.996 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:21:56.996Z,1543936916.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:21:56.996Z,1543936916.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:22:53.134Z,1543936973.134 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T15:22:53.134Z,1543936973.134 [NAL9602] No Fault, FailCount= 5 2018-12-04T15:22:53.504Z,1543936973.504 [NAL9602](INFO): Powering up NAL9602 2018-12-04T15:23:04.700Z,1543936984.700 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:23:57.063Z,1543937037.063 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:23:57.063Z,1543937037.063 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-04T15:23:57.063Z,1543937037.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:23:57.065Z,1543937037.065 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:23:57.065Z,1543937037.065 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-04T15:23:57.065Z,1543937037.065 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:23:57.078Z,1543937037.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:23:57.079Z,1543937037.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:23:57.475Z,1543937037.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:23:57.475Z,1543937037.475 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-04T15:23:57.476Z,1543937037.476 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:23:57.476Z,1543937037.476 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-04T15:23:57.866Z,1543937037.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:23:57.867Z,1543937037.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:23:57.867Z,1543937037.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:23:57.867Z,1543937037.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:23:57.868Z,1543937037.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:23:57.868Z,1543937037.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:24:27.782Z,1543937067.782 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T15:19:26.7Z 2018-12-04T15:24:27.782Z,1543937067.782 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T15:24:27.783Z,1543937067.783 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T15:24:28.653Z,1543937068.653 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0315.lzma 2018-12-04T15:24:29.117Z,1543937069.117 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0315.lzma.bak 2018-12-04T15:24:29.117Z,1543937069.117 [DataOverHttps](INFO): SBD MOMSN=8964927 2018-12-04T15:24:38.860Z,1543937078.860 [DataOverHttps](INFO): Sending 345 bytes from file Logs/20181203T211451/Express0316.lzma 2018-12-04T15:24:39.632Z,1543937079.632 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0316.lzma.bak 2018-12-04T15:24:39.632Z,1543937079.632 [DataOverHttps](INFO): SBD MOMSN=8964930 2018-12-04T15:24:40.945Z,1543937080.945 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T15:24:40.945Z,1543937080.945 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T15:24:40.945Z,1543937080.945 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T15:24:44.068Z,1543937084.068 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T15:25:14.532Z,1543937114.532 [NAL9602](INFO): Powering down 2018-12-04T15:25:57.881Z,1543937157.881 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:25:57.881Z,1543937157.881 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-04T15:25:57.881Z,1543937157.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:25:57.884Z,1543937157.884 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:25:57.884Z,1543937157.884 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-04T15:25:57.884Z,1543937157.884 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:25:57.898Z,1543937157.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:25:57.898Z,1543937157.898 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:25:58.299Z,1543937158.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:25:58.299Z,1543937158.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-04T15:25:58.299Z,1543937158.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:25:58.299Z,1543937158.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-04T15:25:58.683Z,1543937158.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:25:58.683Z,1543937158.683 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:25:58.684Z,1543937158.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:25:58.684Z,1543937158.684 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:25:58.685Z,1543937158.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:25:58.685Z,1543937158.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:27:59.015Z,1543937279.015 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:27:59.015Z,1543937279.015 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-04T15:27:59.015Z,1543937279.015 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:27:59.017Z,1543937279.017 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:27:59.017Z,1543937279.017 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-04T15:27:59.017Z,1543937279.017 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:27:59.053Z,1543937279.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:27:59.053Z,1543937279.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:27:59.442Z,1543937279.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:27:59.442Z,1543937279.442 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-04T15:27:59.443Z,1543937279.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:27:59.443Z,1543937279.443 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-04T15:27:59.802Z,1543937279.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:27:59.802Z,1543937279.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:27:59.803Z,1543937279.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:27:59.803Z,1543937279.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:27:59.804Z,1543937279.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:27:59.804Z,1543937279.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:29:41.194Z,1543937381.194 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T15:29:41.194Z,1543937381.194 [Default:CheckIn:C.Wait] Stopped 2018-12-04T15:29:41.194Z,1543937381.194 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T15:29:41.194Z,1543937381.194 [Default:CheckIn:D] Running Loop=1 2018-12-04T15:29:41.594Z,1543937381.594 [Default:CheckIn:D] Stopped 2018-12-04T15:29:41.594Z,1543937381.594 [Default:CheckIn:E] Running Loop=1 2018-12-04T15:29:41.987Z,1543937381.987 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1094.826172 min 2018-12-04T15:29:41.987Z,1543937381.987 [Default:CheckIn:E] Stopped 2018-12-04T15:29:41.987Z,1543937381.987 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T15:29:41.987Z,1543937381.987 [Default:CheckIn] Stopped 2018-12-04T15:29:41.987Z,1543937381.987 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T15:29:41.987Z,1543937381.987 [Default:CheckIn](INFO): Running loop #107 2018-12-04T15:29:41.987Z,1543937381.987 [Default:CheckIn] Running Loop=107 2018-12-04T15:29:41.988Z,1543937381.988 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T15:29:41.988Z,1543937381.988 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T15:29:42.757Z,1543937382.757 [NAL9602](INFO): Powering up 2018-12-04T15:29:53.560Z,1543937393.560 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:30:02.275Z,1543937402.275 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:30:02.275Z,1543937402.275 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-04T15:30:02.275Z,1543937402.275 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:30:02.277Z,1543937402.277 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:30:02.277Z,1543937402.277 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-04T15:30:02.277Z,1543937402.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:30:02.324Z,1543937402.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:30:02.324Z,1543937402.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:30:02.416Z,1543937402.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:30:02.416Z,1543937402.416 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-04T15:30:02.416Z,1543937402.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:30:02.416Z,1543937402.416 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-04T15:30:02.770Z,1543937402.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:30:02.771Z,1543937402.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:30:02.771Z,1543937402.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:30:02.772Z,1543937402.772 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:30:02.772Z,1543937402.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:30:02.772Z,1543937402.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:30:25.544Z,1543937425.544 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T15:30:25.618Z,1543937425.618 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T15:30:25.618Z,1543937425.618 [NAL9602] Data Fault, FailCount= 1 2018-12-04T15:30:25.618Z,1543937425.618 [NAL9602](ERROR): Data Fault 2018-12-04T15:30:25.656Z,1543937425.656 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T15:30:25.948Z,1543937425.948 [NAL9602](INFO): Powering down 2018-12-04T15:30:26.785Z,1543937426.785 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T15:30:26.785Z,1543937426.785 [NAL9602] No Fault, FailCount= 1 2018-12-04T15:30:56.308Z,1543937456.308 [NAL9602](INFO): Powering up NAL9602 2018-12-04T15:31:07.508Z,1543937467.508 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:32:02.950Z,1543937522.950 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:32:02.951Z,1543937522.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-04T15:32:02.951Z,1543937522.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:32:02.953Z,1543937522.953 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:32:02.953Z,1543937522.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-04T15:32:02.953Z,1543937522.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:32:03.015Z,1543937523.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:32:03.015Z,1543937523.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:32:03.351Z,1543937523.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:32:03.351Z,1543937523.351 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-04T15:32:03.352Z,1543937523.352 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:32:03.352Z,1543937523.352 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-04T15:32:03.726Z,1543937523.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:32:03.727Z,1543937523.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:32:03.727Z,1543937523.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:32:03.728Z,1543937523.728 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:32:03.728Z,1543937523.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:32:03.728Z,1543937523.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:34:03.732Z,1543937643.732 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:34:03.733Z,1543937643.733 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-04T15:34:03.733Z,1543937643.733 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:34:03.736Z,1543937643.736 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:34:03.737Z,1543937643.737 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-04T15:34:03.737Z,1543937643.737 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:34:03.750Z,1543937643.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:34:03.750Z,1543937643.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:34:04.174Z,1543937644.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:34:04.174Z,1543937644.174 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-04T15:34:04.175Z,1543937644.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:34:04.175Z,1543937644.175 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-04T15:34:04.546Z,1543937644.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:34:04.546Z,1543937644.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:34:04.547Z,1543937644.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:34:04.547Z,1543937644.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:34:04.547Z,1543937644.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:34:04.548Z,1543937644.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:34:43.263Z,1543937683.263 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T15:29:41.0Z 2018-12-04T15:34:43.263Z,1543937683.263 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T15:34:43.264Z,1543937683.264 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T15:34:49.951Z,1543937689.951 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0318.lzma 2018-12-04T15:34:50.752Z,1543937690.752 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0318.lzma.bak 2018-12-04T15:34:50.752Z,1543937690.752 [DataOverHttps](INFO): SBD MOMSN=8964961 2018-12-04T15:34:59.951Z,1543937699.951 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T15:35:00.017Z,1543937700.017 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0319.lzma 2018-12-04T15:35:00.802Z,1543937700.802 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0319.lzma.bak 2018-12-04T15:35:00.802Z,1543937700.802 [DataOverHttps](INFO): SBD MOMSN=8964963 2018-12-04T15:35:02.114Z,1543937702.114 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T15:35:02.114Z,1543937702.114 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T15:35:02.114Z,1543937702.114 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T15:35:30.288Z,1543937730.288 [NAL9602](INFO): Powering down 2018-12-04T15:36:04.656Z,1543937764.656 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:36:04.657Z,1543937764.657 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-04T15:36:04.657Z,1543937764.657 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:36:04.659Z,1543937764.659 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:36:04.659Z,1543937764.659 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-04T15:36:04.659Z,1543937764.659 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:36:04.688Z,1543937764.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:36:04.688Z,1543937764.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:36:05.062Z,1543937765.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:36:05.062Z,1543937765.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-04T15:36:05.063Z,1543937765.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:36:05.063Z,1543937765.063 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-04T15:36:05.455Z,1543937765.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:36:05.456Z,1543937765.456 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:36:05.456Z,1543937765.456 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:36:05.457Z,1543937765.457 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:36:05.457Z,1543937765.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:36:05.457Z,1543937765.457 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:38:05.526Z,1543937885.526 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:38:05.526Z,1543937885.526 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-04T15:38:05.526Z,1543937885.526 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:38:05.528Z,1543937885.528 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:38:05.528Z,1543937885.528 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-04T15:38:05.528Z,1543937885.528 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:38:05.542Z,1543937885.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:38:05.543Z,1543937885.543 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:38:05.931Z,1543937885.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:38:05.931Z,1543937885.931 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-04T15:38:05.932Z,1543937885.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:38:05.932Z,1543937885.932 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-04T15:38:06.326Z,1543937886.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:38:06.326Z,1543937886.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:38:06.327Z,1543937886.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:38:06.327Z,1543937886.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:38:06.327Z,1543937886.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:38:06.328Z,1543937886.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:40:02.290Z,1543938002.290 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T15:40:02.290Z,1543938002.290 [Default:CheckIn:C.Wait] Stopped 2018-12-04T15:40:02.290Z,1543938002.290 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T15:40:02.290Z,1543938002.290 [Default:CheckIn:D] Running Loop=1 2018-12-04T15:40:02.687Z,1543938002.687 [Default:CheckIn:D] Stopped 2018-12-04T15:40:02.688Z,1543938002.688 [Default:CheckIn:E] Running Loop=1 2018-12-04T15:40:03.091Z,1543938003.091 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1105.177734 min 2018-12-04T15:40:03.091Z,1543938003.091 [Default:CheckIn:E] Stopped 2018-12-04T15:40:03.091Z,1543938003.091 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T15:40:03.091Z,1543938003.091 [Default:CheckIn] Stopped 2018-12-04T15:40:03.091Z,1543938003.091 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T15:40:03.092Z,1543938003.092 [Default:CheckIn](INFO): Running loop #108 2018-12-04T15:40:03.092Z,1543938003.092 [Default:CheckIn] Running Loop=108 2018-12-04T15:40:03.092Z,1543938003.092 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T15:40:03.092Z,1543938003.092 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T15:40:03.858Z,1543938003.858 [NAL9602](INFO): Powering up 2018-12-04T15:40:06.690Z,1543938006.690 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:40:06.690Z,1543938006.690 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-04T15:40:06.691Z,1543938006.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:40:06.693Z,1543938006.693 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:40:06.693Z,1543938006.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-04T15:40:06.693Z,1543938006.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:40:06.707Z,1543938006.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:40:06.707Z,1543938006.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:40:07.104Z,1543938007.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:40:07.105Z,1543938007.105 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-04T15:40:07.105Z,1543938007.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:40:07.105Z,1543938007.105 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-04T15:40:07.490Z,1543938007.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:40:07.490Z,1543938007.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:40:07.491Z,1543938007.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:40:07.491Z,1543938007.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:40:07.491Z,1543938007.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:40:07.492Z,1543938007.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:40:15.060Z,1543938015.060 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:40:15.858Z,1543938015.858 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T15:40:15.858Z,1543938015.858 [NAL9602] Data Fault, FailCount= 2 2018-12-04T15:40:15.858Z,1543938015.858 [NAL9602](ERROR): Data Fault 2018-12-04T15:40:15.922Z,1543938015.922 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T15:40:16.260Z,1543938016.260 [NAL9602](INFO): Powering down 2018-12-04T15:40:17.115Z,1543938017.115 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T15:40:17.115Z,1543938017.115 [NAL9602] No Fault, FailCount= 2 2018-12-04T15:40:46.372Z,1543938046.372 [NAL9602](INFO): Powering up NAL9602 2018-12-04T15:40:57.980Z,1543938057.980 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:42:07.945Z,1543938127.945 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:42:07.945Z,1543938127.945 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-04T15:42:07.945Z,1543938127.945 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:42:07.948Z,1543938127.948 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:42:07.948Z,1543938127.948 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-04T15:42:07.948Z,1543938127.948 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:42:07.962Z,1543938127.962 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:42:07.963Z,1543938127.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:42:08.087Z,1543938128.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:42:08.087Z,1543938128.087 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-04T15:42:08.088Z,1543938128.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:42:08.088Z,1543938128.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-04T15:42:08.410Z,1543938128.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:42:08.410Z,1543938128.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:42:08.411Z,1543938128.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:42:08.411Z,1543938128.411 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:42:08.411Z,1543938128.411 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:42:08.412Z,1543938128.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:44:08.559Z,1543938248.559 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:44:08.559Z,1543938248.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-04T15:44:08.559Z,1543938248.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:44:08.561Z,1543938248.561 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:44:08.561Z,1543938248.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-04T15:44:08.561Z,1543938248.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:44:08.605Z,1543938248.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:44:08.605Z,1543938248.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:44:08.982Z,1543938248.982 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:44:08.982Z,1543938248.982 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-04T15:44:08.983Z,1543938248.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:44:08.983Z,1543938248.983 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-04T15:44:09.366Z,1543938249.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:44:09.367Z,1543938249.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:44:09.367Z,1543938249.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:44:09.367Z,1543938249.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:44:09.368Z,1543938249.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:44:09.368Z,1543938249.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:45:04.151Z,1543938304.151 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T15:40:03.1Z 2018-12-04T15:45:04.151Z,1543938304.151 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T15:45:04.151Z,1543938304.151 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T15:45:09.583Z,1543938309.583 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0321.lzma 2018-12-04T15:45:10.381Z,1543938310.381 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0321.lzma.bak 2018-12-04T15:45:10.381Z,1543938310.381 [DataOverHttps](INFO): SBD MOMSN=8964993 2018-12-04T15:45:19.928Z,1543938319.928 [DataOverHttps](INFO): Sending 308 bytes from file Logs/20181203T211451/Express0322.lzma 2018-12-04T15:45:20.729Z,1543938320.729 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0322.lzma.bak 2018-12-04T15:45:20.730Z,1543938320.730 [DataOverHttps](INFO): SBD MOMSN=8964995 2018-12-04T15:45:22.246Z,1543938322.246 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T15:45:22.246Z,1543938322.246 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T15:45:22.246Z,1543938322.246 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T15:46:01.151Z,1543938361.151 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T15:46:09.641Z,1543938369.641 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:46:09.642Z,1543938369.642 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-04T15:46:09.642Z,1543938369.642 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:46:09.644Z,1543938369.644 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:46:09.644Z,1543938369.644 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-04T15:46:09.644Z,1543938369.644 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:46:09.657Z,1543938369.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:46:09.657Z,1543938369.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:46:10.051Z,1543938370.051 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:46:10.051Z,1543938370.051 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-04T15:46:10.052Z,1543938370.052 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:46:10.052Z,1543938370.052 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-04T15:46:10.434Z,1543938370.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:46:10.435Z,1543938370.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:46:10.436Z,1543938370.436 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:46:10.436Z,1543938370.436 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:46:10.436Z,1543938370.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:46:10.437Z,1543938370.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:46:31.607Z,1543938391.607 [NAL9602](INFO): Powering down 2018-12-04T15:48:10.813Z,1543938490.813 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:48:10.813Z,1543938490.813 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-04T15:48:10.813Z,1543938490.813 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:48:10.815Z,1543938490.815 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:48:10.815Z,1543938490.815 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-04T15:48:10.815Z,1543938490.815 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:48:10.828Z,1543938490.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:48:10.829Z,1543938490.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:48:11.219Z,1543938491.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:48:11.219Z,1543938491.219 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-04T15:48:11.220Z,1543938491.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:48:11.220Z,1543938491.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-04T15:48:11.610Z,1543938491.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:48:11.610Z,1543938491.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:48:11.611Z,1543938491.611 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:48:11.611Z,1543938491.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:48:11.611Z,1543938491.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:48:11.612Z,1543938491.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:50:11.730Z,1543938611.730 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:50:11.730Z,1543938611.730 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-04T15:50:11.730Z,1543938611.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:50:11.732Z,1543938611.732 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:50:11.733Z,1543938611.733 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-04T15:50:11.733Z,1543938611.733 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:50:11.748Z,1543938611.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:50:11.748Z,1543938611.748 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:50:12.151Z,1543938612.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:50:12.151Z,1543938612.151 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-04T15:50:12.152Z,1543938612.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:50:12.152Z,1543938612.152 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-04T15:50:12.540Z,1543938612.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:50:12.540Z,1543938612.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:50:12.540Z,1543938612.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:50:12.541Z,1543938612.541 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:50:12.541Z,1543938612.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:50:12.542Z,1543938612.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:50:22.540Z,1543938622.540 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T15:50:22.540Z,1543938622.540 [Default:CheckIn:C.Wait] Stopped 2018-12-04T15:50:22.540Z,1543938622.540 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T15:50:22.540Z,1543938622.540 [Default:CheckIn:D] Running Loop=1 2018-12-04T15:50:22.944Z,1543938622.944 [Default:CheckIn:D] Stopped 2018-12-04T15:50:22.944Z,1543938622.944 [Default:CheckIn:E] Running Loop=1 2018-12-04T15:50:23.340Z,1543938623.340 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1115.515365 min 2018-12-04T15:50:23.340Z,1543938623.340 [Default:CheckIn:E] Stopped 2018-12-04T15:50:23.340Z,1543938623.340 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T15:50:23.340Z,1543938623.340 [Default:CheckIn] Stopped 2018-12-04T15:50:23.340Z,1543938623.340 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T15:50:23.341Z,1543938623.341 [Default:CheckIn](INFO): Running loop #109 2018-12-04T15:50:23.341Z,1543938623.341 [Default:CheckIn] Running Loop=109 2018-12-04T15:50:23.341Z,1543938623.341 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T15:50:23.341Z,1543938623.341 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T15:50:24.103Z,1543938624.103 [NAL9602](INFO): Powering up 2018-12-04T15:50:35.304Z,1543938635.304 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:51:07.280Z,1543938667.280 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T15:51:07.358Z,1543938667.358 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T15:51:07.358Z,1543938667.358 [NAL9602] Data Fault, FailCount= 3 2018-12-04T15:51:07.358Z,1543938667.358 [NAL9602](ERROR): Data Fault 2018-12-04T15:51:07.428Z,1543938667.428 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T15:51:07.680Z,1543938667.680 [NAL9602](INFO): Powering down 2018-12-04T15:51:08.528Z,1543938668.528 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T15:51:08.528Z,1543938668.528 [NAL9602] No Fault, FailCount= 3 2018-12-04T15:51:32.847Z,1543938692.847 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T15:51:32.847Z,1543938692.847 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T15:51:32.847Z,1543938692.847 [DropWeight](ERROR): Hardware Fault 2018-12-04T15:51:32.902Z,1543938692.902 [CBIT](INFO): Critical error at 20181204T155132 2018-12-04T15:51:32.916Z,1543938692.916 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T15:51:32.916Z,1543938692.916 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T15:51:33.296Z,1543938693.296 [CBIT](INFO): Critical error at 20181204T155132 2018-12-04T15:51:38.047Z,1543938698.047 [NAL9602](INFO): Powering up NAL9602 2018-12-04T15:51:49.247Z,1543938709.247 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:51:50.059Z,1543938710.059 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T15:51:50.059Z,1543938710.059 [NAL9602] Data Fault, FailCount= 4 2018-12-04T15:51:50.059Z,1543938710.059 [NAL9602](ERROR): Data Fault 2018-12-04T15:51:50.095Z,1543938710.095 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T15:51:53.142Z,1543938713.142 [NAL9602](INFO): Powering down 2018-12-04T15:51:53.645Z,1543938713.645 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T15:51:53.645Z,1543938713.645 [NAL9602] No Fault, FailCount= 4 2018-12-04T15:52:12.824Z,1543938732.824 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:52:12.824Z,1543938732.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-04T15:52:12.824Z,1543938732.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:52:12.826Z,1543938732.826 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:52:12.827Z,1543938732.827 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-04T15:52:12.827Z,1543938732.827 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:52:12.840Z,1543938732.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:52:12.840Z,1543938732.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:52:13.246Z,1543938733.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:52:13.246Z,1543938733.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-04T15:52:13.247Z,1543938733.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:52:13.247Z,1543938733.247 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-04T15:52:13.634Z,1543938733.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:52:13.634Z,1543938733.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:52:13.635Z,1543938733.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:52:13.635Z,1543938733.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:52:13.635Z,1543938733.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:52:13.636Z,1543938733.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:52:23.201Z,1543938743.201 [NAL9602](INFO): Powering up NAL9602 2018-12-04T15:52:34.143Z,1543938754.143 [NAL9602](INFO): NAL9602 initialized 2018-12-04T15:54:14.113Z,1543938854.113 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:54:14.114Z,1543938854.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-04T15:54:14.114Z,1543938854.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:54:14.116Z,1543938854.116 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:54:14.116Z,1543938854.116 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-04T15:54:14.116Z,1543938854.116 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:54:14.129Z,1543938854.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:54:14.130Z,1543938854.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:54:14.267Z,1543938854.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:54:14.267Z,1543938854.267 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-04T15:54:14.268Z,1543938854.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:54:14.268Z,1543938854.268 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-04T15:54:14.582Z,1543938854.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:54:14.583Z,1543938854.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:54:14.583Z,1543938854.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:54:14.584Z,1543938854.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:54:14.584Z,1543938854.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:54:14.584Z,1543938854.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:55:24.459Z,1543938924.459 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T15:50:23.3Z 2018-12-04T15:55:24.459Z,1543938924.459 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T15:55:24.459Z,1543938924.459 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T15:55:30.085Z,1543938930.085 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0324.lzma 2018-12-04T15:55:30.885Z,1543938930.885 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0324.lzma.bak 2018-12-04T15:55:30.885Z,1543938930.885 [DataOverHttps](INFO): SBD MOMSN=8965025 2018-12-04T15:55:40.187Z,1543938940.187 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T15:55:40.245Z,1543938940.245 [DataOverHttps](INFO): Sending 342 bytes from file Logs/20181203T211451/Express0325.lzma 2018-12-04T15:55:41.047Z,1543938941.047 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0325.lzma.bak 2018-12-04T15:55:41.047Z,1543938941.047 [DataOverHttps](INFO): SBD MOMSN=8965029 2018-12-04T15:55:42.418Z,1543938942.418 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T15:55:42.418Z,1543938942.418 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T15:55:42.418Z,1543938942.418 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T15:56:10.451Z,1543938970.451 [NAL9602](INFO): Powering down 2018-12-04T15:56:14.868Z,1543938974.868 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:56:14.868Z,1543938974.868 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-04T15:56:14.868Z,1543938974.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:56:14.883Z,1543938974.883 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:56:14.883Z,1543938974.883 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-04T15:56:14.883Z,1543938974.883 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:56:14.912Z,1543938974.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:56:14.912Z,1543938974.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:56:15.298Z,1543938975.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:56:15.298Z,1543938975.298 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-04T15:56:15.299Z,1543938975.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:56:15.299Z,1543938975.299 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-04T15:56:15.674Z,1543938975.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:56:15.674Z,1543938975.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:56:15.675Z,1543938975.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:56:15.675Z,1543938975.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:56:15.675Z,1543938975.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:56:15.676Z,1543938975.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:58:16.022Z,1543939096.022 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:58:16.022Z,1543939096.022 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-04T15:58:16.023Z,1543939096.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T15:58:16.025Z,1543939096.025 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T15:58:16.025Z,1543939096.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-04T15:58:16.025Z,1543939096.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T15:58:16.068Z,1543939096.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T15:58:16.069Z,1543939096.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T15:58:16.461Z,1543939096.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T15:58:16.461Z,1543939096.461 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-04T15:58:16.462Z,1543939096.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T15:58:16.462Z,1543939096.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-04T15:58:16.822Z,1543939096.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T15:58:16.823Z,1543939096.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:58:16.823Z,1543939096.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T15:58:16.823Z,1543939096.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T15:58:16.824Z,1543939096.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T15:58:16.824Z,1543939096.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:00:05.450Z,1543939205.450 [Reporter](INFO): platform_buoyancy_position 960.486301 cc 2018-12-04T16:00:16.967Z,1543939216.967 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:00:16.967Z,1543939216.967 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-04T16:00:16.967Z,1543939216.967 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:00:16.969Z,1543939216.969 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:00:16.969Z,1543939216.969 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-04T16:00:16.969Z,1543939216.969 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:00:16.982Z,1543939216.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:00:16.983Z,1543939216.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:00:17.378Z,1543939217.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:00:17.378Z,1543939217.378 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-04T16:00:17.379Z,1543939217.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:00:17.379Z,1543939217.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-04T16:00:17.786Z,1543939217.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:00:17.786Z,1543939217.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:00:17.787Z,1543939217.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:00:17.787Z,1543939217.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:00:17.788Z,1543939217.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:00:17.788Z,1543939217.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:00:42.521Z,1543939242.521 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T16:00:42.522Z,1543939242.522 [Default:CheckIn:C.Wait] Stopped 2018-12-04T16:00:42.522Z,1543939242.522 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T16:00:42.522Z,1543939242.522 [Default:CheckIn:D] Running Loop=1 2018-12-04T16:00:42.906Z,1543939242.906 [Default:CheckIn:D] Stopped 2018-12-04T16:00:42.906Z,1543939242.906 [Default:CheckIn:E] Running Loop=1 2018-12-04T16:00:43.306Z,1543939243.306 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1125.848047 min 2018-12-04T16:00:43.306Z,1543939243.306 [Default:CheckIn:E] Stopped 2018-12-04T16:00:43.306Z,1543939243.306 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T16:00:43.306Z,1543939243.306 [Default:CheckIn] Stopped 2018-12-04T16:00:43.307Z,1543939243.307 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T16:00:43.307Z,1543939243.307 [Default:CheckIn](INFO): Running loop #110 2018-12-04T16:00:43.307Z,1543939243.307 [Default:CheckIn] Running Loop=110 2018-12-04T16:00:43.307Z,1543939243.307 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T16:00:43.307Z,1543939243.307 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T16:00:44.083Z,1543939244.083 [NAL9602](INFO): Powering up 2018-12-04T16:00:55.291Z,1543939255.291 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:01:27.231Z,1543939287.231 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T16:01:27.306Z,1543939287.306 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T16:01:27.306Z,1543939287.306 [NAL9602] Data Fault, FailCount= 5 2018-12-04T16:01:27.306Z,1543939287.306 [NAL9602](ERROR): Data Fault 2018-12-04T16:01:27.396Z,1543939287.396 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T16:01:27.396Z,1543939287.396 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T16:01:27.631Z,1543939287.631 [NAL9602](INFO): Powering down 2018-12-04T16:01:27.691Z,1543939287.691 [CBIT](INFO): Critical error at 20181204T160127 2018-12-04T16:02:17.905Z,1543939337.905 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:02:17.905Z,1543939337.905 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-04T16:02:17.905Z,1543939337.905 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:02:17.907Z,1543939337.907 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:02:17.907Z,1543939337.907 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-04T16:02:17.907Z,1543939337.907 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:02:17.920Z,1543939337.920 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:02:17.921Z,1543939337.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:02:18.324Z,1543939338.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:02:18.324Z,1543939338.324 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-04T16:02:18.325Z,1543939338.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:02:18.325Z,1543939338.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-04T16:02:18.709Z,1543939338.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:02:18.710Z,1543939338.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:02:18.710Z,1543939338.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:02:18.711Z,1543939338.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:02:18.711Z,1543939338.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:02:18.712Z,1543939338.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:03:27.552Z,1543939407.552 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T16:03:27.552Z,1543939407.552 [NAL9602] No Fault, FailCount= 5 2018-12-04T16:03:27.915Z,1543939407.915 [NAL9602](INFO): Powering up NAL9602 2018-12-04T16:03:39.111Z,1543939419.111 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:03:39.909Z,1543939419.909 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T16:03:39.909Z,1543939419.909 [NAL9602] Data Fault, FailCount= 1 2018-12-04T16:03:39.909Z,1543939419.909 [NAL9602](ERROR): Data Fault 2018-12-04T16:03:39.966Z,1543939419.966 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T16:03:40.311Z,1543939420.311 [NAL9602](INFO): Powering down 2018-12-04T16:03:41.150Z,1543939421.150 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T16:03:41.150Z,1543939421.150 [NAL9602] No Fault, FailCount= 1 2018-12-04T16:04:10.659Z,1543939450.659 [NAL9602](INFO): Powering up NAL9602 2018-12-04T16:04:19.076Z,1543939459.076 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:04:19.076Z,1543939459.076 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-04T16:04:19.076Z,1543939459.076 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:04:19.078Z,1543939459.078 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:04:19.078Z,1543939459.078 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-04T16:04:19.078Z,1543939459.078 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:04:19.119Z,1543939459.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:04:19.119Z,1543939459.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:04:19.516Z,1543939459.516 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:04:19.516Z,1543939459.516 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-04T16:04:19.516Z,1543939459.516 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:04:19.517Z,1543939459.517 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-04T16:04:19.878Z,1543939459.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:04:19.878Z,1543939459.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:04:19.879Z,1543939459.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:04:19.879Z,1543939459.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:04:19.879Z,1543939459.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:04:19.880Z,1543939459.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:04:21.863Z,1543939461.863 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:05:44.740Z,1543939544.740 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T16:00:43.3Z 2018-12-04T16:05:44.741Z,1543939544.741 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T16:05:44.741Z,1543939544.741 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T16:05:49.644Z,1543939549.644 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0327.lzma 2018-12-04T16:05:50.845Z,1543939550.845 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0327.lzma.bak 2018-12-04T16:05:50.846Z,1543939550.846 [DataOverHttps](INFO): SBD MOMSN=8965059 2018-12-04T16:06:00.214Z,1543939560.214 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T16:06:00.299Z,1543939560.299 [DataOverHttps](INFO): Sending 345 bytes from file Logs/20181203T211451/Express0328.lzma 2018-12-04T16:06:01.089Z,1543939561.089 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0328.lzma.bak 2018-12-04T16:06:01.090Z,1543939561.090 [DataOverHttps](INFO): SBD MOMSN=8965062 2018-12-04T16:06:02.800Z,1543939562.800 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T16:06:02.800Z,1543939562.800 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T16:06:02.800Z,1543939562.800 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T16:06:20.024Z,1543939580.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:06:20.024Z,1543939580.024 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-04T16:06:20.024Z,1543939580.024 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:06:20.026Z,1543939580.026 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:06:20.026Z,1543939580.026 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-04T16:06:20.026Z,1543939580.026 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:06:20.062Z,1543939580.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:06:20.062Z,1543939580.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:06:20.442Z,1543939580.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:06:20.442Z,1543939580.442 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-04T16:06:20.473Z,1543939580.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:06:20.473Z,1543939580.473 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-04T16:06:20.830Z,1543939580.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:06:20.830Z,1543939580.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:06:20.831Z,1543939580.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:06:20.831Z,1543939580.831 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:06:20.832Z,1543939580.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:06:20.832Z,1543939580.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:06:30.407Z,1543939590.407 [NAL9602](INFO): Powering down 2018-12-04T16:06:32.859Z,1543939592.859 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T16:06:32.859Z,1543939592.859 [DropWeight] No Fault, FailCount= 1 2018-12-04T16:08:21.104Z,1543939701.104 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:08:21.104Z,1543939701.104 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-04T16:08:21.105Z,1543939701.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:08:21.107Z,1543939701.107 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:08:21.107Z,1543939701.107 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-04T16:08:21.107Z,1543939701.107 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:08:21.120Z,1543939701.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:08:21.120Z,1543939701.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:08:21.522Z,1543939701.522 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:08:21.522Z,1543939701.522 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-04T16:08:21.522Z,1543939701.522 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:08:21.522Z,1543939701.522 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-04T16:08:21.910Z,1543939701.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:08:21.911Z,1543939701.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:08:21.911Z,1543939701.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:08:21.911Z,1543939701.911 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:08:21.912Z,1543939701.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:08:21.912Z,1543939701.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:10:22.264Z,1543939822.264 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:10:22.264Z,1543939822.264 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-04T16:10:22.264Z,1543939822.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:10:22.267Z,1543939822.267 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:10:22.267Z,1543939822.267 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-04T16:10:22.267Z,1543939822.267 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:10:22.280Z,1543939822.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:10:22.280Z,1543939822.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:10:22.677Z,1543939822.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:10:22.677Z,1543939822.677 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-04T16:10:22.678Z,1543939822.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:10:22.678Z,1543939822.678 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-04T16:10:23.063Z,1543939823.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:10:23.063Z,1543939823.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:10:23.064Z,1543939823.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:10:23.064Z,1543939823.064 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:10:23.064Z,1543939823.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:10:23.065Z,1543939823.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:11:03.182Z,1543939863.182 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T16:11:03.182Z,1543939863.182 [Default:CheckIn:C.Wait] Stopped 2018-12-04T16:11:03.183Z,1543939863.183 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T16:11:03.183Z,1543939863.183 [Default:CheckIn:D] Running Loop=1 2018-12-04T16:11:03.586Z,1543939863.586 [Default:CheckIn:D] Stopped 2018-12-04T16:11:03.586Z,1543939863.586 [Default:CheckIn:E] Running Loop=1 2018-12-04T16:11:03.984Z,1543939863.984 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1136.192708 min 2018-12-04T16:11:03.984Z,1543939863.984 [Default:CheckIn:E] Stopped 2018-12-04T16:11:03.984Z,1543939863.984 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T16:11:03.984Z,1543939863.984 [Default:CheckIn] Stopped 2018-12-04T16:11:03.984Z,1543939863.984 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T16:11:03.985Z,1543939863.985 [Default:CheckIn](INFO): Running loop #111 2018-12-04T16:11:03.985Z,1543939863.985 [Default:CheckIn] Running Loop=111 2018-12-04T16:11:03.985Z,1543939863.985 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T16:11:03.985Z,1543939863.985 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T16:11:04.751Z,1543939864.751 [NAL9602](INFO): Powering up 2018-12-04T16:11:15.952Z,1543939875.952 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:11:47.608Z,1543939907.608 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T16:11:47.690Z,1543939907.690 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T16:11:47.690Z,1543939907.690 [NAL9602] Data Fault, FailCount= 2 2018-12-04T16:11:47.690Z,1543939907.690 [NAL9602](ERROR): Data Fault 2018-12-04T16:11:47.757Z,1543939907.757 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T16:11:48.008Z,1543939908.008 [NAL9602](INFO): Powering down 2018-12-04T16:11:48.861Z,1543939908.861 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T16:11:48.861Z,1543939908.861 [NAL9602] No Fault, FailCount= 2 2018-12-04T16:12:18.069Z,1543939938.069 [NAL9602](INFO): Powering up NAL9602 2018-12-04T16:12:23.306Z,1543939943.306 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:12:23.306Z,1543939943.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-04T16:12:23.306Z,1543939943.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:12:23.308Z,1543939943.308 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:12:23.309Z,1543939943.309 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-04T16:12:23.309Z,1543939943.309 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:12:23.322Z,1543939943.322 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:12:23.322Z,1543939943.322 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:12:23.714Z,1543939943.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:12:23.714Z,1543939943.714 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-04T16:12:23.715Z,1543939943.715 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:12:23.715Z,1543939943.715 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-04T16:12:24.102Z,1543939944.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:12:24.103Z,1543939944.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:12:24.103Z,1543939944.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:12:24.104Z,1543939944.104 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:12:24.104Z,1543939944.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:12:24.104Z,1543939944.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:12:28.872Z,1543939948.872 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:14:24.196Z,1543940064.196 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:14:24.196Z,1543940064.196 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-04T16:14:24.196Z,1543940064.196 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:14:24.211Z,1543940064.211 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:14:24.211Z,1543940064.211 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-04T16:14:24.211Z,1543940064.211 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:14:24.261Z,1543940064.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:14:24.261Z,1543940064.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:14:24.626Z,1543940064.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:14:24.626Z,1543940064.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-04T16:14:24.627Z,1543940064.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:14:24.627Z,1543940064.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-04T16:14:25.002Z,1543940065.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:14:25.018Z,1543940065.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:14:25.018Z,1543940065.018 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:14:25.018Z,1543940065.018 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:14:25.019Z,1543940065.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:14:25.019Z,1543940065.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:16:05.046Z,1543940165.046 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T16:11:03.0Z 2018-12-04T16:16:05.046Z,1543940165.046 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T16:16:05.047Z,1543940165.047 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T16:16:09.966Z,1543940169.966 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0330.lzma 2018-12-04T16:16:10.765Z,1543940170.765 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0330.lzma.bak 2018-12-04T16:16:10.765Z,1543940170.765 [DataOverHttps](INFO): SBD MOMSN=8965090 2018-12-04T16:16:20.177Z,1543940180.177 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T16:16:20.321Z,1543940180.321 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0331.lzma 2018-12-04T16:16:21.093Z,1543940181.093 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0331.lzma.bak 2018-12-04T16:16:21.093Z,1543940181.093 [DataOverHttps](INFO): SBD MOMSN=8965092 2018-12-04T16:16:22.819Z,1543940182.819 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T16:16:22.819Z,1543940182.819 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T16:16:22.819Z,1543940182.819 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T16:16:25.975Z,1543940185.975 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:16:25.976Z,1543940185.976 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-04T16:16:25.976Z,1543940185.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:16:25.978Z,1543940185.978 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:16:25.978Z,1543940185.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-04T16:16:25.978Z,1543940185.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:16:25.992Z,1543940185.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:16:25.992Z,1543940185.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:16:26.106Z,1543940186.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:16:26.111Z,1543940186.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-04T16:16:26.111Z,1543940186.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:16:26.111Z,1543940186.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-04T16:16:26.436Z,1543940186.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:16:26.437Z,1543940186.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:16:26.437Z,1543940186.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:16:26.438Z,1543940186.438 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:16:26.438Z,1543940186.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:16:26.439Z,1543940186.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:16:50.407Z,1543940210.407 [NAL9602](INFO): Powering down 2018-12-04T16:18:16.810Z,1543940296.810 [BPC1](INFO): Calculating totals. Valid battery stick count: 53. Valid reserve battery stick count: 6. 2018-12-04T16:18:26.806Z,1543940306.806 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:18:26.806Z,1543940306.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-04T16:18:26.806Z,1543940306.806 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:18:26.808Z,1543940306.808 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:18:26.808Z,1543940306.808 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-04T16:18:26.808Z,1543940306.808 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:18:26.822Z,1543940306.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:18:26.822Z,1543940306.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:18:27.223Z,1543940307.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:18:27.223Z,1543940307.223 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-04T16:18:27.224Z,1543940307.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:18:27.224Z,1543940307.224 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-04T16:18:27.594Z,1543940307.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:18:27.594Z,1543940307.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:18:27.595Z,1543940307.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:18:27.595Z,1543940307.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:18:27.595Z,1543940307.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:18:27.596Z,1543940307.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:20:27.666Z,1543940427.666 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:20:27.666Z,1543940427.666 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-04T16:20:27.666Z,1543940427.666 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:20:27.668Z,1543940427.668 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:20:27.668Z,1543940427.668 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-04T16:20:27.669Z,1543940427.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:20:27.714Z,1543940427.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:20:27.714Z,1543940427.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:20:28.099Z,1543940428.099 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:20:28.099Z,1543940428.099 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-04T16:20:28.099Z,1543940428.099 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:20:28.099Z,1543940428.099 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-04T16:20:28.470Z,1543940428.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:20:28.470Z,1543940428.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:20:28.471Z,1543940428.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:20:28.471Z,1543940428.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:20:28.471Z,1543940428.471 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:20:28.472Z,1543940428.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:21:23.261Z,1543940483.261 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T16:21:23.261Z,1543940483.261 [Default:CheckIn:C.Wait] Stopped 2018-12-04T16:21:23.261Z,1543940483.261 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T16:21:23.261Z,1543940483.261 [Default:CheckIn:D] Running Loop=1 2018-12-04T16:21:23.666Z,1543940483.666 [Default:CheckIn:D] Stopped 2018-12-04T16:21:23.666Z,1543940483.666 [Default:CheckIn:E] Running Loop=1 2018-12-04T16:21:24.067Z,1543940484.067 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1146.527344 min 2018-12-04T16:21:24.067Z,1543940484.067 [Default:CheckIn:E] Stopped 2018-12-04T16:21:24.067Z,1543940484.067 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T16:21:24.067Z,1543940484.067 [Default:CheckIn] Stopped 2018-12-04T16:21:24.067Z,1543940484.067 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T16:21:24.067Z,1543940484.067 [Default:CheckIn](INFO): Running loop #112 2018-12-04T16:21:24.067Z,1543940484.067 [Default:CheckIn] Running Loop=112 2018-12-04T16:21:24.068Z,1543940484.068 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T16:21:24.068Z,1543940484.068 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T16:21:24.835Z,1543940484.835 [NAL9602](INFO): Powering up 2018-12-04T16:21:36.040Z,1543940496.040 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:21:36.834Z,1543940496.834 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T16:21:36.834Z,1543940496.834 [NAL9602] Data Fault, FailCount= 3 2018-12-04T16:21:36.834Z,1543940496.834 [NAL9602](ERROR): Data Fault 2018-12-04T16:21:36.893Z,1543940496.893 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T16:21:37.236Z,1543940497.236 [NAL9602](INFO): Powering down 2018-12-04T16:21:38.079Z,1543940498.079 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T16:21:38.079Z,1543940498.079 [NAL9602] No Fault, FailCount= 3 2018-12-04T16:22:07.600Z,1543940527.600 [NAL9602](INFO): Powering up NAL9602 2018-12-04T16:22:19.156Z,1543940539.156 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:22:28.789Z,1543940548.789 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:22:28.789Z,1543940548.789 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-04T16:22:28.790Z,1543940548.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:22:28.792Z,1543940548.792 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:22:28.792Z,1543940548.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-04T16:22:28.792Z,1543940548.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:22:28.805Z,1543940548.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:22:28.805Z,1543940548.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:22:29.202Z,1543940549.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:22:29.202Z,1543940549.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-04T16:22:29.203Z,1543940549.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:22:29.203Z,1543940549.203 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-04T16:22:29.590Z,1543940549.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:22:29.590Z,1543940549.590 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:22:29.591Z,1543940549.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:22:29.591Z,1543940549.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:22:29.592Z,1543940549.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:22:29.592Z,1543940549.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:24:29.839Z,1543940669.839 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:24:29.839Z,1543940669.839 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-04T16:24:29.839Z,1543940669.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:24:29.841Z,1543940669.841 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:24:29.841Z,1543940669.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-04T16:24:29.841Z,1543940669.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:24:29.855Z,1543940669.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:24:29.855Z,1543940669.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:24:30.231Z,1543940670.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:24:30.231Z,1543940670.231 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-04T16:24:30.231Z,1543940670.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:24:30.231Z,1543940670.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-04T16:24:30.618Z,1543940670.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:24:30.618Z,1543940670.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:24:30.619Z,1543940670.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:24:30.619Z,1543940670.619 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:24:30.620Z,1543940670.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:24:30.620Z,1543940670.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:26:25.273Z,1543940785.273 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T16:21:24.1Z 2018-12-04T16:26:25.273Z,1543940785.273 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T16:26:25.273Z,1543940785.273 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T16:26:30.563Z,1543940790.563 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0333.lzma 2018-12-04T16:26:31.011Z,1543940791.011 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:26:31.011Z,1543940791.011 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-04T16:26:31.011Z,1543940791.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:26:31.013Z,1543940791.013 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:26:31.013Z,1543940791.013 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-04T16:26:31.013Z,1543940791.013 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:26:31.060Z,1543940791.060 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:26:31.061Z,1543940791.061 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:26:31.357Z,1543940791.357 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0333.lzma.bak 2018-12-04T16:26:31.357Z,1543940791.357 [DataOverHttps](INFO): SBD MOMSN=8965120 2018-12-04T16:26:31.453Z,1543940791.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:26:31.453Z,1543940791.453 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-04T16:26:31.454Z,1543940791.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:26:31.454Z,1543940791.454 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-04T16:26:32.933Z,1543940792.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:26:32.933Z,1543940792.933 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:26:32.934Z,1543940792.934 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:26:32.934Z,1543940792.934 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:26:32.939Z,1543940792.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:26:32.939Z,1543940792.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:26:40.937Z,1543940800.937 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0334.lzma 2018-12-04T16:26:41.708Z,1543940801.708 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0334.lzma.bak 2018-12-04T16:26:41.708Z,1543940801.708 [DataOverHttps](INFO): SBD MOMSN=8965122 2018-12-04T16:26:43.182Z,1543940803.182 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T16:26:43.182Z,1543940803.182 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T16:26:43.182Z,1543940803.182 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T16:27:22.009Z,1543940842.009 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T16:27:52.479Z,1543940872.479 [NAL9602](INFO): Powering down 2018-12-04T16:28:33.262Z,1543940913.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:28:33.263Z,1543940913.263 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-04T16:28:33.263Z,1543940913.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:28:33.265Z,1543940913.265 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:28:33.265Z,1543940913.265 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-04T16:28:33.265Z,1543940913.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:28:33.279Z,1543940913.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:28:33.279Z,1543940913.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:28:33.674Z,1543940913.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:28:33.674Z,1543940913.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-04T16:28:33.674Z,1543940913.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:28:33.675Z,1543940913.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-04T16:28:34.057Z,1543940914.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:28:34.058Z,1543940914.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:28:34.058Z,1543940914.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:28:34.059Z,1543940914.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:28:34.059Z,1543940914.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:28:34.059Z,1543940914.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:30:34.298Z,1543941034.298 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:30:34.298Z,1543941034.298 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-04T16:30:34.299Z,1543941034.299 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:30:34.301Z,1543941034.301 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:30:34.301Z,1543941034.301 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-04T16:30:34.301Z,1543941034.301 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:30:34.314Z,1543941034.314 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:30:34.314Z,1543941034.314 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:30:34.719Z,1543941034.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:30:34.719Z,1543941034.719 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-04T16:30:34.720Z,1543941034.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:30:34.720Z,1543941034.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-04T16:30:35.098Z,1543941035.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:30:35.098Z,1543941035.098 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:30:35.099Z,1543941035.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:30:35.099Z,1543941035.099 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:30:35.100Z,1543941035.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:30:35.100Z,1543941035.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:31:43.442Z,1543941103.442 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T16:31:43.442Z,1543941103.442 [Default:CheckIn:C.Wait] Stopped 2018-12-04T16:31:43.442Z,1543941103.442 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T16:31:43.442Z,1543941103.442 [Default:CheckIn:D] Running Loop=1 2018-12-04T16:31:43.842Z,1543941103.842 [Default:CheckIn:D] Stopped 2018-12-04T16:31:43.842Z,1543941103.842 [Default:CheckIn:E] Running Loop=1 2018-12-04T16:31:44.233Z,1543941104.233 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1156.863672 min 2018-12-04T16:31:44.233Z,1543941104.233 [Default:CheckIn:E] Stopped 2018-12-04T16:31:44.233Z,1543941104.233 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T16:31:44.233Z,1543941104.233 [Default:CheckIn] Stopped 2018-12-04T16:31:44.233Z,1543941104.233 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T16:31:44.234Z,1543941104.234 [Default:CheckIn](INFO): Running loop #113 2018-12-04T16:31:44.234Z,1543941104.234 [Default:CheckIn] Running Loop=113 2018-12-04T16:31:44.234Z,1543941104.234 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T16:31:44.234Z,1543941104.234 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T16:31:45.007Z,1543941105.007 [NAL9602](INFO): Powering up 2018-12-04T16:31:56.208Z,1543941116.208 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:32:28.164Z,1543941148.164 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T16:32:28.246Z,1543941148.246 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T16:32:28.246Z,1543941148.246 [NAL9602] Data Fault, FailCount= 4 2018-12-04T16:32:28.246Z,1543941148.246 [NAL9602](ERROR): Data Fault 2018-12-04T16:32:28.309Z,1543941148.309 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T16:32:28.568Z,1543941148.568 [NAL9602](INFO): Powering down 2018-12-04T16:32:29.404Z,1543941149.404 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T16:32:29.404Z,1543941149.404 [NAL9602] No Fault, FailCount= 4 2018-12-04T16:32:35.393Z,1543941155.393 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:32:35.393Z,1543941155.393 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-04T16:32:35.393Z,1543941155.393 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:32:35.395Z,1543941155.395 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:32:35.396Z,1543941155.396 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-04T16:32:35.396Z,1543941155.396 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:32:35.409Z,1543941155.409 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:32:35.409Z,1543941155.409 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:32:35.820Z,1543941155.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:32:35.820Z,1543941155.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-04T16:32:35.821Z,1543941155.821 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:32:35.821Z,1543941155.821 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-04T16:32:39.048Z,1543941159.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:32:39.049Z,1543941159.049 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:32:39.049Z,1543941159.049 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:32:39.049Z,1543941159.049 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:32:39.050Z,1543941159.050 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:32:39.050Z,1543941159.050 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:32:58.676Z,1543941178.676 [NAL9602](INFO): Powering up NAL9602 2018-12-04T16:33:09.479Z,1543941189.479 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:33:10.274Z,1543941190.274 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T16:33:10.274Z,1543941190.274 [NAL9602] Data Fault, FailCount= 5 2018-12-04T16:33:10.274Z,1543941190.274 [NAL9602](ERROR): Data Fault 2018-12-04T16:33:10.343Z,1543941190.343 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T16:33:10.343Z,1543941190.343 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T16:33:10.682Z,1543941190.682 [NAL9602](INFO): Powering down 2018-12-04T16:33:10.714Z,1543941190.714 [CBIT](INFO): Critical error at 20181204T163310 2018-12-04T16:34:39.098Z,1543941279.098 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:34:39.098Z,1543941279.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-04T16:34:39.098Z,1543941279.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:34:39.100Z,1543941279.100 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:34:39.100Z,1543941279.100 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-04T16:34:39.100Z,1543941279.100 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:34:39.113Z,1543941279.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:34:39.114Z,1543941279.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:34:39.535Z,1543941279.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:34:39.535Z,1543941279.535 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-04T16:34:39.535Z,1543941279.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:34:39.535Z,1543941279.535 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-04T16:34:39.901Z,1543941279.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:34:39.902Z,1543941279.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:34:39.902Z,1543941279.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:34:39.903Z,1543941279.903 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:34:39.903Z,1543941279.903 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:34:39.903Z,1543941279.903 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:35:10.280Z,1543941310.280 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T16:35:10.280Z,1543941310.280 [NAL9602] No Fault, FailCount= 5 2018-12-04T16:35:10.636Z,1543941310.636 [NAL9602](INFO): Powering up NAL9602 2018-12-04T16:35:21.836Z,1543941321.836 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:36:34.363Z,1543941394.363 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T16:36:34.363Z,1543941394.363 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T16:36:34.363Z,1543941394.363 [DropWeight](ERROR): Hardware Fault 2018-12-04T16:36:34.433Z,1543941394.433 [CBIT](INFO): Critical error at 20181204T163634 2018-12-04T16:36:34.440Z,1543941394.440 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T16:36:34.440Z,1543941394.440 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T16:36:34.812Z,1543941394.812 [CBIT](INFO): Critical error at 20181204T163634 2018-12-04T16:36:39.994Z,1543941399.994 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:36:39.994Z,1543941399.994 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-04T16:36:39.994Z,1543941399.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:36:39.996Z,1543941399.996 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:36:39.996Z,1543941399.996 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-04T16:36:39.997Z,1543941399.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:36:40.010Z,1543941400.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:36:40.010Z,1543941400.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:36:40.404Z,1543941400.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:36:40.404Z,1543941400.404 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-04T16:36:40.405Z,1543941400.405 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:36:40.405Z,1543941400.405 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-04T16:36:40.794Z,1543941400.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:36:40.799Z,1543941400.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:36:40.799Z,1543941400.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:36:40.799Z,1543941400.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:36:40.800Z,1543941400.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:36:40.800Z,1543941400.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:36:45.570Z,1543941405.570 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T16:31:44.2Z 2018-12-04T16:36:45.570Z,1543941405.570 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T16:36:45.571Z,1543941405.571 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T16:36:50.524Z,1543941410.524 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181203T211451/Courier0336.lzma 2018-12-04T16:36:51.338Z,1543941411.338 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0336.lzma.bak 2018-12-04T16:36:51.338Z,1543941411.338 [DataOverHttps](INFO): SBD MOMSN=8965152 2018-12-04T16:37:00.855Z,1543941420.855 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T16:37:00.948Z,1543941420.948 [DataOverHttps](INFO): Sending 358 bytes from file Logs/20181203T211451/Express0337.lzma 2018-12-04T16:37:01.733Z,1543941421.733 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0337.lzma.bak 2018-12-04T16:37:01.734Z,1543941421.734 [DataOverHttps](INFO): SBD MOMSN=8965157 2018-12-04T16:37:03.055Z,1543941423.055 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T16:37:03.055Z,1543941423.055 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T16:37:03.056Z,1543941423.056 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T16:37:31.025Z,1543941451.025 [NAL9602](INFO): Powering down 2018-12-04T16:38:41.138Z,1543941521.138 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:38:41.138Z,1543941521.138 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-04T16:38:41.138Z,1543941521.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:38:41.140Z,1543941521.140 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:38:41.140Z,1543941521.140 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-04T16:38:41.140Z,1543941521.140 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:38:41.153Z,1543941521.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:38:41.154Z,1543941521.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:38:41.551Z,1543941521.551 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:38:41.551Z,1543941521.551 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-04T16:38:41.551Z,1543941521.551 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:38:41.551Z,1543941521.551 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-04T16:38:41.935Z,1543941521.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:38:41.935Z,1543941521.935 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:38:41.936Z,1543941521.936 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:38:41.936Z,1543941521.936 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:38:41.936Z,1543941521.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:38:41.937Z,1543941521.937 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:40:42.267Z,1543941642.267 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:40:42.267Z,1543941642.267 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-04T16:40:42.268Z,1543941642.268 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:40:42.270Z,1543941642.270 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:40:42.270Z,1543941642.270 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-04T16:40:42.270Z,1543941642.270 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:40:42.283Z,1543941642.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:40:42.283Z,1543941642.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:40:42.682Z,1543941642.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:40:42.682Z,1543941642.682 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-04T16:40:42.683Z,1543941642.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:40:42.683Z,1543941642.683 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-04T16:40:43.063Z,1543941643.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:40:43.064Z,1543941643.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:40:43.064Z,1543941643.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:40:43.064Z,1543941643.064 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:40:43.065Z,1543941643.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:40:43.065Z,1543941643.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:42:03.249Z,1543941723.249 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T16:42:03.249Z,1543941723.249 [Default:CheckIn:C.Wait] Stopped 2018-12-04T16:42:03.249Z,1543941723.249 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T16:42:03.249Z,1543941723.249 [Default:CheckIn:D] Running Loop=1 2018-12-04T16:42:03.654Z,1543941723.654 [Default:CheckIn:D] Stopped 2018-12-04T16:42:03.654Z,1543941723.654 [Default:CheckIn:E] Running Loop=1 2018-12-04T16:42:04.048Z,1543941724.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1167.193880 min 2018-12-04T16:42:04.048Z,1543941724.048 [Default:CheckIn:E] Stopped 2018-12-04T16:42:04.048Z,1543941724.048 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T16:42:04.048Z,1543941724.048 [Default:CheckIn] Stopped 2018-12-04T16:42:04.048Z,1543941724.048 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T16:42:04.048Z,1543941724.048 [Default:CheckIn](INFO): Running loop #114 2018-12-04T16:42:04.048Z,1543941724.048 [Default:CheckIn] Running Loop=114 2018-12-04T16:42:04.049Z,1543941724.049 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T16:42:04.049Z,1543941724.049 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T16:42:04.819Z,1543941724.819 [NAL9602](INFO): Powering up 2018-12-04T16:42:16.020Z,1543941736.020 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:42:43.210Z,1543941763.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:42:43.210Z,1543941763.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-04T16:42:43.210Z,1543941763.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:42:43.212Z,1543941763.212 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:42:43.212Z,1543941763.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-04T16:42:43.213Z,1543941763.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:42:43.227Z,1543941763.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:42:43.227Z,1543941763.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:42:43.622Z,1543941763.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:42:43.622Z,1543941763.622 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-04T16:42:43.623Z,1543941763.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:42:43.623Z,1543941763.623 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-04T16:42:44.010Z,1543941764.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:42:44.010Z,1543941764.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:42:44.011Z,1543941764.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:42:44.011Z,1543941764.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:42:44.012Z,1543941764.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:42:44.012Z,1543941764.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:42:47.979Z,1543941767.979 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T16:42:48.062Z,1543941768.062 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T16:42:48.062Z,1543941768.062 [NAL9602] Data Fault, FailCount= 1 2018-12-04T16:42:48.062Z,1543941768.062 [NAL9602](ERROR): Data Fault 2018-12-04T16:42:48.142Z,1543941768.142 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T16:42:48.379Z,1543941768.379 [NAL9602](INFO): Powering down 2018-12-04T16:42:49.229Z,1543941769.229 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T16:42:49.229Z,1543941769.230 [NAL9602] No Fault, FailCount= 1 2018-12-04T16:43:18.747Z,1543941798.747 [NAL9602](INFO): Powering up NAL9602 2018-12-04T16:43:29.947Z,1543941809.947 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:44:44.449Z,1543941884.449 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:44:44.449Z,1543941884.449 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-04T16:44:44.449Z,1543941884.449 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:44:44.452Z,1543941884.452 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:44:44.452Z,1543941884.452 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-04T16:44:44.452Z,1543941884.452 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:44:44.465Z,1543941884.465 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:44:44.466Z,1543941884.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:44:44.607Z,1543941884.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:44:44.607Z,1543941884.607 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-04T16:44:44.608Z,1543941884.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:44:44.608Z,1543941884.608 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-04T16:44:44.913Z,1543941884.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:44:44.913Z,1543941884.913 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:44:44.913Z,1543941884.913 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:44:44.914Z,1543941884.914 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:44:44.914Z,1543941884.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:44:44.915Z,1543941884.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:46:44.940Z,1543942004.940 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:46:44.940Z,1543942004.940 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-04T16:46:44.940Z,1543942004.940 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:46:44.942Z,1543942004.942 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:46:44.942Z,1543942004.942 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-04T16:46:44.942Z,1543942004.942 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:46:44.956Z,1543942004.956 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:46:44.956Z,1543942004.956 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:46:45.361Z,1543942005.361 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:46:45.361Z,1543942005.361 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-04T16:46:45.363Z,1543942005.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:46:45.363Z,1543942005.363 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-04T16:46:45.748Z,1543942005.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:46:45.748Z,1543942005.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:46:45.749Z,1543942005.749 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:46:45.749Z,1543942005.749 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:46:45.749Z,1543942005.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:46:45.750Z,1543942005.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:47:05.243Z,1543942025.243 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T16:42:04.0Z 2018-12-04T16:47:05.243Z,1543942025.243 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T16:47:05.243Z,1543942025.243 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T16:47:10.369Z,1543942030.369 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0339.lzma 2018-12-04T16:47:11.162Z,1543942031.162 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0339.lzma.bak 2018-12-04T16:47:11.162Z,1543942031.162 [DataOverHttps](INFO): SBD MOMSN=8965193 2018-12-04T16:47:20.504Z,1543942040.504 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T16:47:20.596Z,1543942040.596 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20181203T211451/Express0340.lzma 2018-12-04T16:47:21.378Z,1543942041.378 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0340.lzma.bak 2018-12-04T16:47:21.378Z,1543942041.378 [DataOverHttps](INFO): SBD MOMSN=8965195 2018-12-04T16:47:22.701Z,1543942042.701 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T16:47:22.701Z,1543942042.701 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T16:47:22.701Z,1543942042.701 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T16:47:50.673Z,1543942070.673 [NAL9602](INFO): Powering down 2018-12-04T16:48:45.891Z,1543942125.891 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:48:45.891Z,1543942125.891 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-04T16:48:45.891Z,1543942125.891 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:48:45.893Z,1543942125.893 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:48:45.893Z,1543942125.893 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-04T16:48:45.893Z,1543942125.893 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:48:45.907Z,1543942125.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:48:45.907Z,1543942125.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:48:46.302Z,1543942126.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:48:46.302Z,1543942126.302 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-04T16:48:46.303Z,1543942126.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:48:46.303Z,1543942126.303 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-04T16:48:46.688Z,1543942126.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:48:46.688Z,1543942126.688 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:48:46.689Z,1543942126.689 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:48:46.689Z,1543942126.689 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:48:46.689Z,1543942126.689 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:48:46.690Z,1543942126.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:50:46.966Z,1543942246.966 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:50:46.966Z,1543942246.966 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-04T16:50:46.966Z,1543942246.966 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:50:46.968Z,1543942246.968 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:50:46.968Z,1543942246.968 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-04T16:50:46.969Z,1543942246.969 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:50:46.982Z,1543942246.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:50:46.982Z,1543942246.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:50:47.381Z,1543942247.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:50:47.381Z,1543942247.381 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-04T16:50:47.382Z,1543942247.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:50:47.382Z,1543942247.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-04T16:50:47.768Z,1543942247.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:50:47.768Z,1543942247.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:50:47.768Z,1543942247.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:50:47.769Z,1543942247.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:50:47.769Z,1543942247.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:50:47.770Z,1543942247.770 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:51:34.709Z,1543942294.709 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T16:51:34.709Z,1543942294.709 [DropWeight] No Fault, FailCount= 1 2018-12-04T16:52:23.156Z,1543942343.156 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T16:52:23.156Z,1543942343.156 [Default:CheckIn:C.Wait] Stopped 2018-12-04T16:52:23.156Z,1543942343.156 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T16:52:23.156Z,1543942343.156 [Default:CheckIn:D] Running Loop=1 2018-12-04T16:52:23.557Z,1543942343.557 [Default:CheckIn:D] Stopped 2018-12-04T16:52:23.557Z,1543942343.557 [Default:CheckIn:E] Running Loop=1 2018-12-04T16:52:23.954Z,1543942343.954 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1177.525521 min 2018-12-04T16:52:23.955Z,1543942343.955 [Default:CheckIn:E] Stopped 2018-12-04T16:52:23.955Z,1543942343.955 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T16:52:23.955Z,1543942343.955 [Default:CheckIn] Stopped 2018-12-04T16:52:23.955Z,1543942343.955 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T16:52:23.955Z,1543942343.955 [Default:CheckIn](INFO): Running loop #115 2018-12-04T16:52:23.955Z,1543942343.955 [Default:CheckIn] Running Loop=115 2018-12-04T16:52:23.955Z,1543942343.955 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T16:52:23.955Z,1543942343.955 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T16:52:24.719Z,1543942344.719 [NAL9602](INFO): Powering up 2018-12-04T16:52:35.920Z,1543942355.920 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:52:36.720Z,1543942356.720 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T16:52:36.720Z,1543942356.720 [NAL9602] Data Fault, FailCount= 2 2018-12-04T16:52:36.720Z,1543942356.720 [NAL9602](ERROR): Data Fault 2018-12-04T16:52:36.794Z,1543942356.794 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T16:52:37.117Z,1543942357.117 [NAL9602](INFO): Powering down 2018-12-04T16:52:37.981Z,1543942357.981 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T16:52:37.981Z,1543942357.981 [NAL9602] No Fault, FailCount= 2 2018-12-04T16:52:47.914Z,1543942367.914 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:52:47.914Z,1543942367.914 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-04T16:52:47.914Z,1543942367.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:52:47.916Z,1543942367.916 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:52:47.917Z,1543942367.917 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-04T16:52:47.917Z,1543942367.917 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:52:47.930Z,1543942367.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:52:47.930Z,1543942367.930 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:52:48.328Z,1543942368.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:52:48.328Z,1543942368.328 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-04T16:52:48.329Z,1543942368.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:52:48.329Z,1543942368.329 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-04T16:52:48.722Z,1543942368.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:52:48.722Z,1543942368.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:52:48.723Z,1543942368.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:52:48.723Z,1543942368.723 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:52:48.723Z,1543942368.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:52:48.724Z,1543942368.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:53:07.496Z,1543942387.496 [NAL9602](INFO): Powering up NAL9602 2018-12-04T16:53:18.656Z,1543942398.656 [NAL9602](INFO): NAL9602 initialized 2018-12-04T16:54:48.902Z,1543942488.902 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:54:48.902Z,1543942488.902 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-04T16:54:48.902Z,1543942488.902 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:54:48.904Z,1543942488.904 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:54:48.904Z,1543942488.904 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-04T16:54:48.905Z,1543942488.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:54:48.918Z,1543942488.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:54:48.918Z,1543942488.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:54:49.310Z,1543942489.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:54:49.310Z,1543942489.310 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-04T16:54:49.311Z,1543942489.311 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:54:49.311Z,1543942489.311 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-04T16:54:49.702Z,1543942489.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:54:49.702Z,1543942489.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:54:49.703Z,1543942489.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:54:49.703Z,1543942489.703 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:54:49.703Z,1543942489.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:54:49.704Z,1543942489.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:56:49.702Z,1543942609.702 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:56:49.702Z,1543942609.702 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-04T16:56:49.703Z,1543942609.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:56:49.705Z,1543942609.705 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:56:49.705Z,1543942609.705 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-04T16:56:49.705Z,1543942609.705 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:56:49.719Z,1543942609.719 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:56:49.719Z,1543942609.719 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:56:50.062Z,1543942610.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:56:50.062Z,1543942610.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-04T16:56:50.062Z,1543942610.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:56:50.062Z,1543942610.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-04T16:56:50.447Z,1543942610.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:56:50.447Z,1543942610.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:56:50.448Z,1543942610.448 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:56:50.448Z,1543942610.448 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:56:50.448Z,1543942610.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:56:50.449Z,1543942610.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:57:24.971Z,1543942644.971 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T16:52:23.0Z 2018-12-04T16:57:24.971Z,1543942644.971 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T16:57:24.971Z,1543942644.971 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T16:57:29.989Z,1543942649.989 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0342.lzma 2018-12-04T16:57:30.789Z,1543942650.789 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0342.lzma.bak 2018-12-04T16:57:30.789Z,1543942650.789 [DataOverHttps](INFO): SBD MOMSN=8965224 2018-12-04T16:57:40.247Z,1543942660.247 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0343.lzma 2018-12-04T16:57:41.045Z,1543942661.045 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0343.lzma.bak 2018-12-04T16:57:41.045Z,1543942661.045 [DataOverHttps](INFO): SBD MOMSN=8965226 2018-12-04T16:57:42.390Z,1543942662.390 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T16:57:42.390Z,1543942662.390 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T16:57:42.390Z,1543942662.390 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T16:58:22.059Z,1543942702.059 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T16:58:50.464Z,1543942730.464 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:58:50.464Z,1543942730.464 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-04T16:58:50.465Z,1543942730.465 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T16:58:50.467Z,1543942730.467 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T16:58:50.467Z,1543942730.467 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-04T16:58:50.467Z,1543942730.467 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T16:58:50.502Z,1543942730.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T16:58:50.503Z,1543942730.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T16:58:50.882Z,1543942730.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T16:58:50.882Z,1543942730.882 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-04T16:58:50.907Z,1543942730.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T16:58:50.907Z,1543942730.907 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-04T16:58:51.274Z,1543942731.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T16:58:51.274Z,1543942731.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:58:51.275Z,1543942731.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:58:51.275Z,1543942731.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T16:58:51.275Z,1543942731.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T16:58:51.276Z,1543942731.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T16:58:52.455Z,1543942732.455 [NAL9602](INFO): Powering down 2018-12-04T17:00:51.355Z,1543942851.355 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:00:51.356Z,1543942851.356 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-04T17:00:51.356Z,1543942851.356 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:00:51.358Z,1543942851.358 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:00:51.358Z,1543942851.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-04T17:00:51.358Z,1543942851.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:00:51.371Z,1543942851.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:00:51.371Z,1543942851.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:00:51.766Z,1543942851.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:00:51.766Z,1543942851.766 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-04T17:00:51.766Z,1543942851.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:00:51.766Z,1543942851.766 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-04T17:00:52.154Z,1543942852.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:00:52.155Z,1543942852.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:00:52.155Z,1543942852.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:00:52.155Z,1543942852.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:00:52.156Z,1543942852.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:00:52.156Z,1543942852.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:02:42.898Z,1543942962.898 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T17:02:42.898Z,1543942962.898 [Default:CheckIn:C.Wait] Stopped 2018-12-04T17:02:42.898Z,1543942962.898 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T17:02:42.898Z,1543942962.898 [Default:CheckIn:D] Running Loop=1 2018-12-04T17:02:43.294Z,1543942963.294 [Default:CheckIn:D] Stopped 2018-12-04T17:02:43.294Z,1543942963.294 [Default:CheckIn:E] Running Loop=1 2018-12-04T17:02:43.692Z,1543942963.692 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1187.854557 min 2018-12-04T17:02:43.693Z,1543942963.693 [Default:CheckIn:E] Stopped 2018-12-04T17:02:43.693Z,1543942963.693 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T17:02:43.693Z,1543942963.693 [Default:CheckIn] Stopped 2018-12-04T17:02:43.693Z,1543942963.693 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T17:02:43.693Z,1543942963.693 [Default:CheckIn](INFO): Running loop #116 2018-12-04T17:02:43.693Z,1543942963.693 [Default:CheckIn] Running Loop=116 2018-12-04T17:02:43.693Z,1543942963.693 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T17:02:43.694Z,1543942963.694 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T17:02:44.461Z,1543942964.461 [NAL9602](INFO): Powering up 2018-12-04T17:02:52.497Z,1543942972.497 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:02:52.497Z,1543942972.497 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-04T17:02:52.497Z,1543942972.497 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:02:52.499Z,1543942972.499 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:02:52.499Z,1543942972.499 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-04T17:02:52.500Z,1543942972.500 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:02:52.513Z,1543942972.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:02:52.513Z,1543942972.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:02:52.902Z,1543942972.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:02:52.902Z,1543942972.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-04T17:02:52.903Z,1543942972.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:02:52.903Z,1543942972.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-04T17:02:53.287Z,1543942973.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:02:53.287Z,1543942973.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:02:53.288Z,1543942973.288 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:02:53.288Z,1543942973.288 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:02:53.289Z,1543942973.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:02:53.289Z,1543942973.289 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:02:55.662Z,1543942975.662 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:04:53.452Z,1543943093.452 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:04:53.452Z,1543943093.452 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-04T17:04:53.452Z,1543943093.452 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:04:53.455Z,1543943093.455 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:04:53.455Z,1543943093.455 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-04T17:04:53.455Z,1543943093.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:04:53.468Z,1543943093.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:04:53.469Z,1543943093.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:04:53.870Z,1543943093.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:04:53.870Z,1543943093.870 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-04T17:04:53.871Z,1543943093.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:04:53.871Z,1543943093.871 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-04T17:04:54.252Z,1543943094.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:04:54.253Z,1543943094.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:04:54.253Z,1543943094.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:04:54.254Z,1543943094.254 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:04:54.254Z,1543943094.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:04:54.254Z,1543943094.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:06:54.529Z,1543943214.529 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:06:54.529Z,1543943214.529 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-04T17:06:54.529Z,1543943214.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:06:54.531Z,1543943214.531 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:06:54.531Z,1543943214.531 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-04T17:06:54.531Z,1543943214.531 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:06:54.578Z,1543943214.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:06:54.578Z,1543943214.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:06:54.991Z,1543943214.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:06:54.991Z,1543943214.991 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-04T17:06:54.991Z,1543943214.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:06:54.991Z,1543943214.991 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-04T17:06:55.365Z,1543943215.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:06:55.365Z,1543943215.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:06:55.366Z,1543943215.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:06:55.366Z,1543943215.366 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:06:55.367Z,1543943215.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:06:55.367Z,1543943215.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:07:44.944Z,1543943264.944 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T17:02:43.7Z 2018-12-04T17:07:44.944Z,1543943264.944 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T17:07:44.944Z,1543943264.944 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T17:07:49.990Z,1543943269.990 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0345.lzma 2018-12-04T17:07:50.789Z,1543943270.789 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0345.lzma.bak 2018-12-04T17:07:50.789Z,1543943270.789 [DataOverHttps](INFO): SBD MOMSN=8965255 2018-12-04T17:08:00.506Z,1543943280.506 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T17:08:00.587Z,1543943280.587 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0346.lzma 2018-12-04T17:08:01.357Z,1543943281.357 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0346.lzma.bak 2018-12-04T17:08:01.358Z,1543943281.358 [DataOverHttps](INFO): SBD MOMSN=8965257 2018-12-04T17:08:02.671Z,1543943282.671 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T17:08:02.671Z,1543943282.671 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T17:08:02.671Z,1543943282.671 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T17:08:30.651Z,1543943310.651 [NAL9602](INFO): Powering down 2018-12-04T17:08:55.438Z,1543943335.438 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:08:55.438Z,1543943335.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-04T17:08:55.438Z,1543943335.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:08:55.440Z,1543943335.440 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:08:55.440Z,1543943335.440 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-04T17:08:55.441Z,1543943335.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:08:55.484Z,1543943335.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:08:55.485Z,1543943335.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:08:55.846Z,1543943335.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:08:55.846Z,1543943335.846 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-04T17:08:55.847Z,1543943335.847 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:08:55.847Z,1543943335.847 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-04T17:08:56.242Z,1543943336.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:08:56.242Z,1543943336.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:08:56.243Z,1543943336.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:08:56.243Z,1543943336.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:08:56.244Z,1543943336.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:08:56.244Z,1543943336.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:10:56.355Z,1543943456.355 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:10:56.355Z,1543943456.355 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-04T17:10:56.355Z,1543943456.355 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:10:56.357Z,1543943456.357 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:10:56.357Z,1543943456.357 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-04T17:10:56.357Z,1543943456.357 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:10:56.371Z,1543943456.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:10:56.371Z,1543943456.371 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:10:56.762Z,1543943456.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:10:56.762Z,1543943456.762 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-04T17:10:56.763Z,1543943456.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:10:56.763Z,1543943456.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-04T17:10:57.148Z,1543943457.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:10:57.148Z,1543943457.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:10:57.148Z,1543943457.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:10:57.149Z,1543943457.149 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:10:57.149Z,1543943457.149 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:10:57.150Z,1543943457.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:12:57.249Z,1543943577.249 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:12:57.249Z,1543943577.249 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-04T17:12:57.249Z,1543943577.249 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:12:57.251Z,1543943577.251 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:12:57.251Z,1543943577.251 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-04T17:12:57.251Z,1543943577.251 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:12:57.265Z,1543943577.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:12:57.265Z,1543943577.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:12:57.674Z,1543943577.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:12:57.674Z,1543943577.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-04T17:12:57.675Z,1543943577.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:12:57.675Z,1543943577.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-04T17:12:58.056Z,1543943578.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:12:58.057Z,1543943578.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:12:58.057Z,1543943578.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:12:58.057Z,1543943578.057 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:12:58.058Z,1543943578.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:12:58.058Z,1543943578.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:13:02.861Z,1543943582.861 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T17:13:02.861Z,1543943582.861 [Default:CheckIn:C.Wait] Stopped 2018-12-04T17:13:02.861Z,1543943582.861 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T17:13:02.861Z,1543943582.861 [Default:CheckIn:D] Running Loop=1 2018-12-04T17:13:03.257Z,1543943583.257 [Default:CheckIn:D] Stopped 2018-12-04T17:13:03.257Z,1543943583.257 [Default:CheckIn:E] Running Loop=1 2018-12-04T17:13:03.667Z,1543943583.667 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1198.187240 min 2018-12-04T17:13:03.667Z,1543943583.667 [Default:CheckIn:E] Stopped 2018-12-04T17:13:03.668Z,1543943583.668 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T17:13:03.668Z,1543943583.668 [Default:CheckIn] Stopped 2018-12-04T17:13:03.668Z,1543943583.668 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T17:13:03.668Z,1543943583.668 [Default:CheckIn](INFO): Running loop #117 2018-12-04T17:13:03.668Z,1543943583.668 [Default:CheckIn] Running Loop=117 2018-12-04T17:13:03.668Z,1543943583.668 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T17:13:03.668Z,1543943583.668 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T17:13:04.425Z,1543943584.425 [NAL9602](INFO): Powering up 2018-12-04T17:13:15.628Z,1543943595.628 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:13:16.426Z,1543943596.426 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T17:13:16.426Z,1543943596.426 [NAL9602] Data Fault, FailCount= 3 2018-12-04T17:13:16.426Z,1543943596.426 [NAL9602](ERROR): Data Fault 2018-12-04T17:13:16.488Z,1543943596.488 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T17:13:16.828Z,1543943596.828 [NAL9602](INFO): Powering down 2018-12-04T17:13:17.667Z,1543943597.667 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T17:13:17.667Z,1543943597.667 [NAL9602] No Fault, FailCount= 3 2018-12-04T17:13:46.838Z,1543943626.838 [NAL9602](INFO): Powering up NAL9602 2018-12-04T17:13:58.952Z,1543943638.952 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:14:58.238Z,1543943698.238 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:14:58.238Z,1543943698.238 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-04T17:14:58.238Z,1543943698.238 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:14:58.240Z,1543943698.240 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:14:58.241Z,1543943698.241 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-04T17:14:58.241Z,1543943698.241 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:14:58.274Z,1543943698.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:14:58.285Z,1543943698.285 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:14:58.651Z,1543943698.651 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:14:58.651Z,1543943698.651 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-04T17:14:58.652Z,1543943698.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:14:58.652Z,1543943698.652 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-04T17:14:59.046Z,1543943699.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:14:59.046Z,1543943699.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:14:59.047Z,1543943699.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:14:59.047Z,1543943699.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:14:59.048Z,1543943699.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:14:59.048Z,1543943699.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:16:59.135Z,1543943819.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:16:59.135Z,1543943819.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-04T17:16:59.135Z,1543943819.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:16:59.137Z,1543943819.137 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:16:59.137Z,1543943819.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-04T17:16:59.137Z,1543943819.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:16:59.151Z,1543943819.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:16:59.151Z,1543943819.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:16:59.583Z,1543943819.583 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:16:59.583Z,1543943819.583 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-04T17:16:59.584Z,1543943819.584 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:16:59.584Z,1543943819.584 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-04T17:16:59.950Z,1543943819.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:16:59.950Z,1543943819.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:16:59.951Z,1543943819.951 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:16:59.951Z,1543943819.951 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:16:59.952Z,1543943819.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:16:59.952Z,1543943819.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:18:05.015Z,1543943885.015 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T17:13:03.7Z 2018-12-04T17:18:05.015Z,1543943885.015 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T17:18:05.015Z,1543943885.015 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T17:18:10.173Z,1543943890.173 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0348.lzma 2018-12-04T17:18:10.965Z,1543943890.965 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0348.lzma.bak 2018-12-04T17:18:10.965Z,1543943890.965 [DataOverHttps](INFO): SBD MOMSN=8965288 2018-12-04T17:18:20.253Z,1543943900.253 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0349.lzma 2018-12-04T17:18:21.053Z,1543943901.053 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0349.lzma.bak 2018-12-04T17:18:21.054Z,1543943901.054 [DataOverHttps](INFO): SBD MOMSN=8965290 2018-12-04T17:18:22.869Z,1543943902.869 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T17:18:22.869Z,1543943902.869 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T17:18:22.869Z,1543943902.869 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T17:19:01.755Z,1543943941.755 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:19:01.755Z,1543943941.755 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-04T17:19:01.755Z,1543943941.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:19:01.757Z,1543943941.757 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:19:01.757Z,1543943941.757 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-04T17:19:01.757Z,1543943941.757 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:19:01.770Z,1543943941.770 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:19:01.771Z,1543943941.771 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:19:01.903Z,1543943941.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:19:01.903Z,1543943941.903 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-04T17:19:01.903Z,1543943941.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:19:01.903Z,1543943941.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-04T17:19:02.184Z,1543943942.184 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T17:19:02.222Z,1543943942.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:19:02.235Z,1543943942.235 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:19:02.236Z,1543943942.236 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:19:02.236Z,1543943942.236 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:19:02.237Z,1543943942.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:19:02.237Z,1543943942.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:19:32.984Z,1543943972.984 [NAL9602](INFO): Powering down 2018-12-04T17:21:02.614Z,1543944062.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:21:02.614Z,1543944062.614 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-04T17:21:02.614Z,1543944062.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:21:02.616Z,1543944062.616 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:21:02.616Z,1543944062.616 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-04T17:21:02.616Z,1543944062.616 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:21:02.630Z,1543944062.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:21:02.631Z,1543944062.631 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:21:03.028Z,1543944063.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:21:03.028Z,1543944063.028 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-04T17:21:03.029Z,1543944063.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:21:03.029Z,1543944063.029 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-04T17:21:03.425Z,1543944063.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:21:03.426Z,1543944063.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:21:03.426Z,1543944063.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:21:03.427Z,1543944063.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:21:03.427Z,1543944063.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:21:03.427Z,1543944063.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:21:36.264Z,1543944096.264 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T17:21:36.264Z,1543944096.264 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T17:21:36.264Z,1543944096.264 [DropWeight](ERROR): Hardware Fault 2018-12-04T17:21:36.316Z,1543944096.316 [CBIT](INFO): Critical error at 20181204T172136 2018-12-04T17:21:36.342Z,1543944096.342 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T17:21:36.343Z,1543944096.343 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T17:21:36.703Z,1543944096.703 [CBIT](INFO): Critical error at 20181204T172136 2018-12-04T17:23:03.664Z,1543944183.664 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:23:03.664Z,1543944183.664 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-04T17:23:03.664Z,1543944183.664 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:23:03.666Z,1543944183.666 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:23:03.666Z,1543944183.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-04T17:23:03.667Z,1543944183.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:23:03.680Z,1543944183.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:23:03.680Z,1543944183.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:23:04.046Z,1543944184.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:23:04.046Z,1543944184.046 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-04T17:23:04.047Z,1543944184.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:23:04.047Z,1543944184.047 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-04T17:23:04.418Z,1543944184.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:23:04.418Z,1543944184.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:23:04.419Z,1543944184.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:23:04.419Z,1543944184.419 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:23:04.420Z,1543944184.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:23:04.420Z,1543944184.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:23:23.174Z,1543944203.174 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T17:23:23.174Z,1543944203.174 [Default:CheckIn:C.Wait] Stopped 2018-12-04T17:23:23.174Z,1543944203.174 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T17:23:23.174Z,1543944203.174 [Default:CheckIn:D] Running Loop=1 2018-12-04T17:23:23.578Z,1543944203.578 [Default:CheckIn:D] Stopped 2018-12-04T17:23:23.578Z,1543944203.578 [Default:CheckIn:E] Running Loop=1 2018-12-04T17:23:23.969Z,1543944203.969 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1208.525911 min 2018-12-04T17:23:23.969Z,1543944203.969 [Default:CheckIn:E] Stopped 2018-12-04T17:23:23.969Z,1543944203.969 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T17:23:23.970Z,1543944203.970 [Default:CheckIn] Stopped 2018-12-04T17:23:23.970Z,1543944203.970 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T17:23:23.970Z,1543944203.970 [Default:CheckIn](INFO): Running loop #118 2018-12-04T17:23:23.970Z,1543944203.970 [Default:CheckIn] Running Loop=118 2018-12-04T17:23:23.970Z,1543944203.970 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T17:23:23.970Z,1543944203.970 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T17:23:24.751Z,1543944204.751 [NAL9602](INFO): Powering up 2018-12-04T17:23:35.951Z,1543944215.951 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:25:04.643Z,1543944304.643 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:25:04.643Z,1543944304.643 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-04T17:25:04.643Z,1543944304.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:25:04.645Z,1543944304.645 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:25:04.645Z,1543944304.645 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-04T17:25:04.645Z,1543944304.645 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:25:04.684Z,1543944304.684 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:25:04.685Z,1543944304.685 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:25:05.060Z,1543944305.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:25:05.060Z,1543944305.060 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-04T17:25:05.061Z,1543944305.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:25:05.061Z,1543944305.061 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-04T17:25:05.430Z,1543944305.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:25:05.430Z,1543944305.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:25:05.431Z,1543944305.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:25:05.431Z,1543944305.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:25:05.432Z,1543944305.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:25:05.432Z,1543944305.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:25:47.015Z,1543944347.015 [BPC1](INFO): Calculating totals. Valid battery stick count: 54. Valid reserve battery stick count: 6. 2018-12-04T17:27:05.706Z,1543944425.706 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:27:05.707Z,1543944425.707 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-04T17:27:05.707Z,1543944425.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:27:05.709Z,1543944425.709 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:27:05.709Z,1543944425.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-04T17:27:05.709Z,1543944425.709 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:27:05.759Z,1543944425.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:27:05.759Z,1543944425.759 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:27:06.156Z,1543944426.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:27:06.156Z,1543944426.156 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-04T17:27:06.157Z,1543944426.157 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:27:06.157Z,1543944426.157 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-04T17:27:06.518Z,1543944426.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:27:06.518Z,1543944426.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:27:06.519Z,1543944426.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:27:06.519Z,1543944426.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:27:06.520Z,1543944426.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:27:06.520Z,1543944426.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:28:25.046Z,1543944505.046 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T17:23:23.0Z 2018-12-04T17:28:25.046Z,1543944505.046 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T17:28:25.047Z,1543944505.047 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T17:28:29.942Z,1543944509.942 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0351.lzma 2018-12-04T17:28:30.725Z,1543944510.725 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0351.lzma.bak 2018-12-04T17:28:30.726Z,1543944510.726 [DataOverHttps](INFO): SBD MOMSN=8965321 2018-12-04T17:28:40.030Z,1543944520.030 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T17:28:40.115Z,1543944520.115 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0352.lzma 2018-12-04T17:28:40.874Z,1543944520.874 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0352.lzma.bak 2018-12-04T17:28:40.874Z,1543944520.874 [DataOverHttps](INFO): SBD MOMSN=8965325 2018-12-04T17:28:42.178Z,1543944522.178 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T17:28:42.178Z,1543944522.178 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T17:28:42.178Z,1543944522.178 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T17:29:06.579Z,1543944546.579 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:29:06.579Z,1543944546.579 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-04T17:29:06.579Z,1543944546.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:29:06.581Z,1543944546.581 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:29:06.581Z,1543944546.581 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-04T17:29:06.581Z,1543944546.581 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:29:06.595Z,1543944546.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:29:06.595Z,1543944546.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:29:06.987Z,1543944546.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:29:06.987Z,1543944546.987 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-04T17:29:06.988Z,1543944546.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:29:06.988Z,1543944546.988 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-04T17:29:07.382Z,1543944547.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:29:07.382Z,1543944547.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:29:07.383Z,1543944547.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:29:07.383Z,1543944547.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:29:07.384Z,1543944547.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:29:07.384Z,1543944547.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:29:10.155Z,1543944550.155 [NAL9602](INFO): Powering down 2018-12-04T17:31:07.452Z,1543944667.452 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:31:07.452Z,1543944667.452 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-04T17:31:07.452Z,1543944667.452 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:31:07.455Z,1543944667.455 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:31:07.455Z,1543944667.455 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-04T17:31:07.455Z,1543944667.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:31:07.468Z,1543944667.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:31:07.468Z,1543944667.468 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:31:07.469Z,1543944667.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:31:07.469Z,1543944667.469 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:33:42.515Z,1543944822.515 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T17:33:42.515Z,1543944822.515 [Default:CheckIn:C.Wait] Stopped 2018-12-04T17:33:42.515Z,1543944822.515 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T17:33:42.515Z,1543944822.515 [Default:CheckIn:D] Running Loop=1 2018-12-04T17:33:42.919Z,1543944822.919 [Default:CheckIn:D] Stopped 2018-12-04T17:33:42.919Z,1543944822.919 [Default:CheckIn:E] Running Loop=1 2018-12-04T17:33:43.322Z,1543944823.322 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1218.848307 min 2018-12-04T17:33:43.322Z,1543944823.322 [Default:CheckIn:E] Stopped 2018-12-04T17:33:43.323Z,1543944823.323 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T17:33:43.323Z,1543944823.323 [Default:CheckIn] Stopped 2018-12-04T17:33:43.323Z,1543944823.323 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T17:33:43.323Z,1543944823.323 [Default:CheckIn](INFO): Running loop #119 2018-12-04T17:33:43.323Z,1543944823.323 [Default:CheckIn] Running Loop=119 2018-12-04T17:33:43.323Z,1543944823.323 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T17:33:43.323Z,1543944823.323 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T17:33:44.091Z,1543944824.091 [NAL9602](INFO): Powering up 2018-12-04T17:33:55.296Z,1543944835.296 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:33:56.090Z,1543944836.090 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T17:33:56.090Z,1543944836.090 [NAL9602] Data Fault, FailCount= 4 2018-12-04T17:33:56.091Z,1543944836.091 [NAL9602](ERROR): Data Fault 2018-12-04T17:33:56.122Z,1543944836.122 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T17:33:56.492Z,1543944836.492 [NAL9602](INFO): Powering down 2018-12-04T17:33:57.355Z,1543944837.355 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T17:33:57.356Z,1543944837.356 [NAL9602] No Fault, FailCount= 4 2018-12-04T17:34:26.636Z,1543944866.636 [NAL9602](INFO): Powering up NAL9602 2018-12-04T17:34:38.332Z,1543944878.332 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:36:36.293Z,1543944996.293 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T17:36:36.293Z,1543944996.293 [DropWeight] No Fault, FailCount= 1 2018-12-04T17:38:44.344Z,1543945124.344 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T17:33:43.3Z 2018-12-04T17:38:44.345Z,1543945124.345 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T17:38:44.345Z,1543945124.345 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T17:38:49.449Z,1543945129.449 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0354.lzma 2018-12-04T17:38:50.250Z,1543945130.250 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0354.lzma.bak 2018-12-04T17:38:50.250Z,1543945130.250 [DataOverHttps](INFO): SBD MOMSN=8965353 2018-12-04T17:38:59.701Z,1543945139.701 [DataOverHttps](INFO): Sending 356 bytes from file Logs/20181203T211451/Express0355.lzma 2018-12-04T17:39:00.501Z,1543945140.501 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0355.lzma.bak 2018-12-04T17:39:00.501Z,1543945140.501 [DataOverHttps](INFO): SBD MOMSN=8965355 2018-12-04T17:39:01.866Z,1543945141.866 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T17:39:01.866Z,1543945141.866 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T17:39:01.866Z,1543945141.866 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T17:39:41.020Z,1543945181.020 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T17:40:11.820Z,1543945211.820 [NAL9602](INFO): Powering down 2018-12-04T17:44:02.283Z,1543945442.283 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T17:44:02.283Z,1543945442.283 [Default:CheckIn:C.Wait] Stopped 2018-12-04T17:44:02.283Z,1543945442.283 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T17:44:02.283Z,1543945442.283 [Default:CheckIn:D] Running Loop=1 2018-12-04T17:44:02.687Z,1543945442.687 [Default:CheckIn:D] Stopped 2018-12-04T17:44:02.687Z,1543945442.687 [Default:CheckIn:E] Running Loop=1 2018-12-04T17:44:03.079Z,1543945443.079 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1229.177734 min 2018-12-04T17:44:03.079Z,1543945443.079 [Default:CheckIn:E] Stopped 2018-12-04T17:44:03.079Z,1543945443.079 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T17:44:03.079Z,1543945443.079 [Default:CheckIn] Stopped 2018-12-04T17:44:03.079Z,1543945443.079 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T17:44:03.080Z,1543945443.080 [Default:CheckIn](INFO): Running loop #120 2018-12-04T17:44:03.080Z,1543945443.080 [Default:CheckIn] Running Loop=120 2018-12-04T17:44:03.080Z,1543945443.080 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T17:44:03.080Z,1543945443.080 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T17:44:03.859Z,1543945443.859 [NAL9602](INFO): Powering up 2018-12-04T17:44:14.664Z,1543945454.664 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:44:46.616Z,1543945486.616 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T17:44:46.690Z,1543945486.690 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T17:44:46.690Z,1543945486.690 [NAL9602] Data Fault, FailCount= 5 2018-12-04T17:44:46.690Z,1543945486.690 [NAL9602](ERROR): Data Fault 2018-12-04T17:44:46.762Z,1543945486.762 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T17:44:46.762Z,1543945486.762 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T17:44:47.016Z,1543945487.016 [NAL9602](INFO): Powering down 2018-12-04T17:44:47.060Z,1543945487.060 [CBIT](INFO): Critical error at 20181204T174446 2018-12-04T17:46:07.921Z,1543945567.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:46:07.921Z,1543945567.921 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-04T17:46:07.922Z,1543945567.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:46:07.922Z,1543945567.922 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-04T17:46:08.006Z,1543945568.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:46:08.006Z,1543945568.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:46:08.006Z,1543945568.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:46:08.007Z,1543945568.007 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:46:08.007Z,1543945568.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:46:08.008Z,1543945568.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:46:46.729Z,1543945606.729 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T17:46:46.729Z,1543945606.729 [NAL9602] No Fault, FailCount= 5 2018-12-04T17:46:47.095Z,1543945607.095 [NAL9602](INFO): Powering up NAL9602 2018-12-04T17:46:58.293Z,1543945618.293 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:46:59.092Z,1543945619.092 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T17:46:59.092Z,1543945619.092 [NAL9602] Data Fault, FailCount= 1 2018-12-04T17:46:59.092Z,1543945619.092 [NAL9602](ERROR): Data Fault 2018-12-04T17:46:59.149Z,1543945619.149 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T17:46:59.492Z,1543945619.492 [NAL9602](INFO): Powering down 2018-12-04T17:47:00.337Z,1543945620.337 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T17:47:00.337Z,1543945620.337 [NAL9602] No Fault, FailCount= 1 2018-12-04T17:47:29.838Z,1543945649.838 [NAL9602](INFO): Powering up NAL9602 2018-12-04T17:47:41.040Z,1543945661.040 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:48:08.236Z,1543945688.236 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:48:08.236Z,1543945688.236 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-04T17:48:08.236Z,1543945688.236 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:48:08.238Z,1543945688.238 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:48:08.239Z,1543945688.239 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-04T17:48:08.239Z,1543945688.239 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:48:08.252Z,1543945688.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:48:08.252Z,1543945688.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:48:08.643Z,1543945688.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:48:08.643Z,1543945688.643 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-04T17:48:08.644Z,1543945688.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:48:08.644Z,1543945688.644 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-04T17:48:09.026Z,1543945689.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:48:09.027Z,1543945689.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:48:09.027Z,1543945689.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:48:09.027Z,1543945689.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:48:09.028Z,1543945689.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:48:09.028Z,1543945689.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:49:03.923Z,1543945743.923 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T17:44:03.1Z 2018-12-04T17:49:03.924Z,1543945743.924 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T17:49:03.924Z,1543945743.924 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T17:49:08.893Z,1543945748.893 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0357.lzma 2018-12-04T17:49:09.661Z,1543945749.661 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0357.lzma.bak 2018-12-04T17:49:09.662Z,1543945749.662 [DataOverHttps](INFO): SBD MOMSN=8965381 2018-12-04T17:49:18.880Z,1543945758.880 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T17:49:18.973Z,1543945758.973 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0358.lzma 2018-12-04T17:49:19.775Z,1543945759.775 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0358.lzma.bak 2018-12-04T17:49:19.776Z,1543945759.776 [DataOverHttps](INFO): SBD MOMSN=8965384 2018-12-04T17:49:21.156Z,1543945761.156 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T17:49:21.156Z,1543945761.156 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T17:49:21.156Z,1543945761.156 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T17:49:49.255Z,1543945789.255 [NAL9602](INFO): Powering down 2018-12-04T17:50:09.247Z,1543945809.247 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:50:09.247Z,1543945809.247 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-04T17:50:09.247Z,1543945809.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:50:09.250Z,1543945809.250 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:50:09.250Z,1543945809.250 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-04T17:50:09.250Z,1543945809.250 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:50:09.263Z,1543945809.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:50:09.263Z,1543945809.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:50:09.675Z,1543945809.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:50:09.675Z,1543945809.675 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-04T17:50:09.675Z,1543945809.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:50:09.675Z,1543945809.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-04T17:50:10.054Z,1543945810.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:50:10.055Z,1543945810.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:50:10.055Z,1543945810.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:50:10.056Z,1543945810.056 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:50:10.056Z,1543945810.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:50:10.056Z,1543945810.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:52:10.163Z,1543945930.163 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:52:10.163Z,1543945930.163 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-04T17:52:10.163Z,1543945930.163 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:52:10.165Z,1543945930.165 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:52:10.165Z,1543945930.165 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-04T17:52:10.165Z,1543945930.165 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:52:10.179Z,1543945930.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:52:10.179Z,1543945930.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:52:10.556Z,1543945930.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:52:10.556Z,1543945930.556 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-04T17:52:10.557Z,1543945930.557 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:52:10.557Z,1543945930.557 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-04T17:52:10.944Z,1543945930.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:52:10.944Z,1543945930.944 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:52:10.944Z,1543945930.944 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:52:10.945Z,1543945930.945 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:52:10.945Z,1543945930.945 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:52:10.946Z,1543945930.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:54:11.263Z,1543946051.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:54:11.263Z,1543946051.263 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-04T17:54:11.263Z,1543946051.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:54:11.265Z,1543946051.265 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:54:11.265Z,1543946051.265 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-04T17:54:11.265Z,1543946051.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:54:11.280Z,1543946051.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:54:11.280Z,1543946051.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:54:11.678Z,1543946051.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:54:11.678Z,1543946051.678 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-04T17:54:11.679Z,1543946051.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:54:11.679Z,1543946051.679 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-04T17:54:12.062Z,1543946052.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:54:12.062Z,1543946052.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:54:12.063Z,1543946052.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:54:12.063Z,1543946052.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:54:12.063Z,1543946052.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:54:12.064Z,1543946052.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:54:21.274Z,1543946061.274 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T17:54:21.274Z,1543946061.274 [Default:CheckIn:C.Wait] Stopped 2018-12-04T17:54:21.274Z,1543946061.274 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T17:54:21.275Z,1543946061.275 [Default:CheckIn:D] Running Loop=1 2018-12-04T17:54:21.670Z,1543946061.670 [Default:CheckIn:D] Stopped 2018-12-04T17:54:21.670Z,1543946061.670 [Default:CheckIn:E] Running Loop=1 2018-12-04T17:54:22.058Z,1543946062.058 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1239.493880 min 2018-12-04T17:54:22.070Z,1543946062.070 [Default:CheckIn:E] Stopped 2018-12-04T17:54:22.070Z,1543946062.070 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T17:54:22.070Z,1543946062.070 [Default:CheckIn] Stopped 2018-12-04T17:54:22.071Z,1543946062.071 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T17:54:22.071Z,1543946062.071 [Default:CheckIn](INFO): Running loop #121 2018-12-04T17:54:22.071Z,1543946062.071 [Default:CheckIn] Running Loop=121 2018-12-04T17:54:22.071Z,1543946062.071 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T17:54:22.071Z,1543946062.071 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T17:54:22.833Z,1543946062.833 [NAL9602](INFO): Powering up 2018-12-04T17:54:34.036Z,1543946074.036 [NAL9602](INFO): NAL9602 initialized 2018-12-04T17:56:12.208Z,1543946172.208 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:56:12.208Z,1543946172.208 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-04T17:56:12.208Z,1543946172.208 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:56:12.210Z,1543946172.210 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:56:12.210Z,1543946172.210 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-04T17:56:12.210Z,1543946172.210 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:56:12.223Z,1543946172.223 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:56:12.224Z,1543946172.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:56:12.630Z,1543946172.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:56:12.630Z,1543946172.630 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-04T17:56:12.631Z,1543946172.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:56:12.631Z,1543946172.631 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-04T17:56:13.014Z,1543946173.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:56:13.014Z,1543946173.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:56:13.015Z,1543946173.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:56:13.015Z,1543946173.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:56:13.016Z,1543946173.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:56:13.016Z,1543946173.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:58:13.390Z,1543946293.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:58:13.390Z,1543946293.390 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-04T17:58:13.390Z,1543946293.390 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T17:58:13.403Z,1543946293.403 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T17:58:13.403Z,1543946293.403 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-04T17:58:13.403Z,1543946293.403 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T17:58:13.440Z,1543946293.440 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T17:58:13.441Z,1543946293.441 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T17:58:13.775Z,1543946293.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T17:58:13.775Z,1543946293.775 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-04T17:58:13.775Z,1543946293.775 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T17:58:13.775Z,1543946293.775 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-04T17:58:14.142Z,1543946294.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T17:58:14.147Z,1543946294.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:58:14.147Z,1543946294.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:58:14.147Z,1543946294.147 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T17:58:14.148Z,1543946294.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T17:58:14.148Z,1543946294.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T17:59:23.438Z,1543946363.438 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T17:54:22.1Z 2018-12-04T17:59:23.438Z,1543946363.438 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T17:59:23.439Z,1543946363.439 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T17:59:28.416Z,1543946368.416 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0360.lzma 2018-12-04T17:59:29.209Z,1543946369.209 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0360.lzma.bak 2018-12-04T17:59:29.209Z,1543946369.210 [DataOverHttps](INFO): SBD MOMSN=8965410 2018-12-04T17:59:38.451Z,1543946378.451 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T17:59:38.508Z,1543946378.508 [DataOverHttps](INFO): Sending 286 bytes from file Logs/20181203T211451/Express0361.lzma 2018-12-04T17:59:39.309Z,1543946379.309 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0361.lzma.bak 2018-12-04T17:59:39.309Z,1543946379.309 [DataOverHttps](INFO): SBD MOMSN=8965412 2018-12-04T17:59:40.702Z,1543946380.702 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T17:59:40.702Z,1543946380.703 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T17:59:40.703Z,1543946380.703 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T18:00:08.713Z,1543946408.713 [NAL9602](INFO): Powering down 2018-12-04T18:00:14.349Z,1543946414.349 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:00:14.349Z,1543946414.349 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-04T18:00:14.350Z,1543946414.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:00:14.352Z,1543946414.352 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:00:14.352Z,1543946414.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-04T18:00:14.352Z,1543946414.352 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:00:14.365Z,1543946414.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:00:14.365Z,1543946414.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:00:14.758Z,1543946414.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:00:14.758Z,1543946414.758 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-04T18:00:14.759Z,1543946414.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:00:14.759Z,1543946414.759 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-04T18:00:15.139Z,1543946415.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:00:15.139Z,1543946415.139 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:00:15.140Z,1543946415.140 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:00:15.140Z,1543946415.140 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:00:15.140Z,1543946415.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:00:15.141Z,1543946415.141 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:02:15.305Z,1543946535.305 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:02:15.306Z,1543946535.306 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-04T18:02:15.306Z,1543946535.306 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:02:15.308Z,1543946535.308 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:02:15.308Z,1543946535.308 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-04T18:02:15.308Z,1543946535.308 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:02:15.321Z,1543946535.321 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:02:15.321Z,1543946535.321 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:02:15.711Z,1543946535.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:02:15.711Z,1543946535.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-04T18:02:15.712Z,1543946535.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:02:15.712Z,1543946535.712 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-04T18:02:16.100Z,1543946536.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:02:16.100Z,1543946536.100 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:02:16.101Z,1543946536.101 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:02:16.101Z,1543946536.101 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:02:16.102Z,1543946536.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:02:16.102Z,1543946536.102 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:04:16.351Z,1543946656.351 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:04:16.351Z,1543946656.351 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-04T18:04:16.351Z,1543946656.351 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:04:16.353Z,1543946656.353 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:04:16.353Z,1543946656.353 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-04T18:04:16.353Z,1543946656.353 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:04:16.368Z,1543946656.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:04:16.368Z,1543946656.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:04:16.762Z,1543946656.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:04:16.762Z,1543946656.762 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-04T18:04:16.763Z,1543946656.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:04:16.763Z,1543946656.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-04T18:04:17.148Z,1543946657.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:04:17.148Z,1543946657.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:04:17.149Z,1543946657.149 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:04:17.149Z,1543946657.149 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:04:17.150Z,1543946657.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:04:17.150Z,1543946657.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:04:40.866Z,1543946680.866 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T18:04:40.866Z,1543946680.866 [Default:CheckIn:C.Wait] Stopped 2018-12-04T18:04:40.866Z,1543946680.866 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T18:04:40.866Z,1543946680.866 [Default:CheckIn:D] Running Loop=1 2018-12-04T18:04:41.261Z,1543946681.261 [Default:CheckIn:D] Stopped 2018-12-04T18:04:41.261Z,1543946681.261 [Default:CheckIn:E] Running Loop=1 2018-12-04T18:04:41.670Z,1543946681.670 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1249.820703 min 2018-12-04T18:04:41.670Z,1543946681.670 [Default:CheckIn:E] Stopped 2018-12-04T18:04:41.670Z,1543946681.670 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T18:04:41.671Z,1543946681.671 [Default:CheckIn] Stopped 2018-12-04T18:04:41.671Z,1543946681.671 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T18:04:41.671Z,1543946681.671 [Default:CheckIn](INFO): Running loop #122 2018-12-04T18:04:41.671Z,1543946681.671 [Default:CheckIn] Running Loop=122 2018-12-04T18:04:41.671Z,1543946681.671 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T18:04:41.671Z,1543946681.671 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T18:04:42.442Z,1543946682.442 [NAL9602](INFO): Powering up 2018-12-04T18:04:53.636Z,1543946693.636 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:04:54.436Z,1543946694.436 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T18:04:54.436Z,1543946694.436 [NAL9602] Data Fault, FailCount= 2 2018-12-04T18:04:54.436Z,1543946694.436 [NAL9602](ERROR): Data Fault 2018-12-04T18:04:54.498Z,1543946694.498 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T18:04:54.836Z,1543946694.836 [NAL9602](INFO): Powering down 2018-12-04T18:04:55.685Z,1543946695.685 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T18:04:55.685Z,1543946695.685 [NAL9602] No Fault, FailCount= 2 2018-12-04T18:05:24.909Z,1543946724.909 [NAL9602](INFO): Powering up NAL9602 2018-12-04T18:05:36.944Z,1543946736.944 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:06:17.358Z,1543946777.358 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:06:17.358Z,1543946777.358 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-04T18:06:17.358Z,1543946777.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:06:17.360Z,1543946777.360 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:06:17.361Z,1543946777.361 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-04T18:06:17.361Z,1543946777.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:06:17.411Z,1543946777.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:06:17.412Z,1543946777.412 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:06:17.806Z,1543946777.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:06:17.810Z,1543946777.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-04T18:06:17.811Z,1543946777.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:06:17.811Z,1543946777.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-04T18:06:18.154Z,1543946778.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:06:18.154Z,1543946778.154 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:06:18.155Z,1543946778.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:06:18.160Z,1543946778.160 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:06:18.160Z,1543946778.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:06:18.161Z,1543946778.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:06:37.713Z,1543946797.713 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T18:06:37.713Z,1543946797.713 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T18:06:37.713Z,1543946797.713 [DropWeight](ERROR): Hardware Fault 2018-12-04T18:06:37.822Z,1543946797.822 [CBIT](INFO): Critical error at 20181204T180637 2018-12-04T18:06:37.825Z,1543946797.825 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T18:06:37.825Z,1543946797.825 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T18:06:38.159Z,1543946798.159 [CBIT](INFO): Critical error at 20181204T180637 2018-12-04T18:08:18.205Z,1543946898.205 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:08:18.205Z,1543946898.205 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-04T18:08:18.205Z,1543946898.205 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:08:18.208Z,1543946898.208 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:08:18.208Z,1543946898.208 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-04T18:08:18.208Z,1543946898.208 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:08:18.222Z,1543946898.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:08:18.222Z,1543946898.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:08:18.630Z,1543946898.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:08:18.631Z,1543946898.631 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-04T18:08:18.631Z,1543946898.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:08:18.631Z,1543946898.631 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-04T18:08:19.014Z,1543946899.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:08:19.015Z,1543946899.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:08:19.015Z,1543946899.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:08:19.015Z,1543946899.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:08:19.016Z,1543946899.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:08:19.016Z,1543946899.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:09:42.999Z,1543946982.999 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T18:04:41.7Z 2018-12-04T18:09:42.999Z,1543946982.999 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T18:09:42.999Z,1543946982.999 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T18:09:48.055Z,1543946988.055 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0363.lzma 2018-12-04T18:09:48.853Z,1543946988.853 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0363.lzma.bak 2018-12-04T18:09:48.853Z,1543946988.853 [DataOverHttps](INFO): SBD MOMSN=8965443 2018-12-04T18:09:58.307Z,1543946998.307 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0364.lzma 2018-12-04T18:09:59.105Z,1543946999.105 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0364.lzma.bak 2018-12-04T18:09:59.105Z,1543946999.105 [DataOverHttps](INFO): SBD MOMSN=8965447 2018-12-04T18:10:00.450Z,1543947000.450 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T18:10:00.450Z,1543947000.450 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T18:10:00.450Z,1543947000.450 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T18:10:19.284Z,1543947019.284 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:10:19.284Z,1543947019.284 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-04T18:10:19.284Z,1543947019.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:10:19.286Z,1543947019.286 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:10:19.286Z,1543947019.286 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-04T18:10:19.286Z,1543947019.286 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:10:19.320Z,1543947019.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:10:19.321Z,1543947019.321 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:10:19.722Z,1543947019.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:10:19.722Z,1543947019.722 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-04T18:10:19.722Z,1543947019.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:10:19.722Z,1543947019.722 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-04T18:10:20.078Z,1543947020.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:10:20.079Z,1543947020.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:10:20.079Z,1543947020.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:10:20.079Z,1543947020.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:10:20.080Z,1543947020.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:10:20.080Z,1543947020.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:10:40.196Z,1543947040.196 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T18:11:10.991Z,1543947070.991 [NAL9602](INFO): Powering down 2018-12-04T18:12:20.226Z,1543947140.226 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:12:20.226Z,1543947140.226 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-04T18:12:20.226Z,1543947140.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:12:20.228Z,1543947140.228 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:12:20.228Z,1543947140.228 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-04T18:12:20.228Z,1543947140.228 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:12:20.242Z,1543947140.242 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:12:20.243Z,1543947140.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:12:20.640Z,1543947140.640 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:12:20.640Z,1543947140.640 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-04T18:12:20.641Z,1543947140.641 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:12:20.641Z,1543947140.641 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-04T18:12:21.027Z,1543947141.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:12:21.028Z,1543947141.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:12:21.028Z,1543947141.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:12:21.028Z,1543947141.028 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:12:21.029Z,1543947141.029 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:12:21.029Z,1543947141.029 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:14:21.107Z,1543947261.107 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:14:21.107Z,1543947261.107 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-04T18:14:21.107Z,1543947261.107 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:14:21.109Z,1543947261.109 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:14:21.109Z,1543947261.109 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-04T18:14:21.109Z,1543947261.109 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:14:21.123Z,1543947261.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:14:21.123Z,1543947261.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:14:21.529Z,1543947261.529 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:14:21.529Z,1543947261.529 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-04T18:14:21.529Z,1543947261.529 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:14:21.529Z,1543947261.529 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-04T18:14:21.902Z,1543947261.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:14:21.902Z,1543947261.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:14:21.903Z,1543947261.903 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:14:21.914Z,1543947261.914 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:14:21.915Z,1543947261.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:14:21.915Z,1543947261.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:15:00.746Z,1543947300.746 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T18:15:00.746Z,1543947300.746 [Default:CheckIn:C.Wait] Stopped 2018-12-04T18:15:00.746Z,1543947300.746 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T18:15:00.746Z,1543947300.746 [Default:CheckIn:D] Running Loop=1 2018-12-04T18:15:01.137Z,1543947301.137 [Default:CheckIn:D] Stopped 2018-12-04T18:15:01.137Z,1543947301.137 [Default:CheckIn:E] Running Loop=1 2018-12-04T18:15:01.546Z,1543947301.546 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1260.151953 min 2018-12-04T18:15:01.547Z,1543947301.547 [Default:CheckIn:E] Stopped 2018-12-04T18:15:01.547Z,1543947301.547 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T18:15:01.547Z,1543947301.547 [Default:CheckIn] Stopped 2018-12-04T18:15:01.547Z,1543947301.547 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T18:15:01.547Z,1543947301.547 [Default:CheckIn](INFO): Running loop #123 2018-12-04T18:15:01.547Z,1543947301.547 [Default:CheckIn] Running Loop=123 2018-12-04T18:15:01.547Z,1543947301.547 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T18:15:01.548Z,1543947301.548 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T18:15:02.312Z,1543947302.312 [NAL9602](INFO): Powering up 2018-12-04T18:15:13.511Z,1543947313.511 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:16:22.260Z,1543947382.260 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:16:22.260Z,1543947382.260 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-04T18:16:22.260Z,1543947382.260 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:16:22.262Z,1543947382.262 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:16:22.262Z,1543947382.262 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-04T18:16:22.262Z,1543947382.262 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:16:22.276Z,1543947382.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:16:22.276Z,1543947382.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:16:22.682Z,1543947382.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:16:22.683Z,1543947382.683 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-04T18:16:22.683Z,1543947382.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:16:22.683Z,1543947382.683 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-04T18:16:23.070Z,1543947383.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:16:23.070Z,1543947383.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:16:23.071Z,1543947383.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:16:23.071Z,1543947383.071 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:16:23.071Z,1543947383.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:16:23.072Z,1543947383.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:18:23.274Z,1543947503.274 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:18:23.275Z,1543947503.275 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-04T18:18:23.275Z,1543947503.275 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:18:23.277Z,1543947503.277 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:18:23.277Z,1543947503.277 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-04T18:18:23.277Z,1543947503.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:18:23.291Z,1543947503.291 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:18:23.291Z,1543947503.291 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:18:23.691Z,1543947503.691 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:18:23.691Z,1543947503.691 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-04T18:18:23.692Z,1543947503.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:18:23.692Z,1543947503.692 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-04T18:18:24.082Z,1543947504.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:18:24.083Z,1543947504.083 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:18:24.083Z,1543947504.083 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:18:24.083Z,1543947504.083 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:18:24.084Z,1543947504.084 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:18:24.084Z,1543947504.084 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:20:03.067Z,1543947603.067 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T18:15:01.5Z 2018-12-04T18:20:03.067Z,1543947603.067 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T18:20:03.067Z,1543947603.067 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T18:20:08.065Z,1543947608.065 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0366.lzma 2018-12-04T18:20:08.865Z,1543947608.865 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0366.lzma.bak 2018-12-04T18:20:08.865Z,1543947608.865 [DataOverHttps](INFO): SBD MOMSN=8965476 2018-12-04T18:20:18.289Z,1543947618.289 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T18:20:18.335Z,1543947618.335 [DataOverHttps](INFO): Sending 292 bytes from file Logs/20181203T211451/Express0367.lzma 2018-12-04T18:20:19.133Z,1543947619.133 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0367.lzma.bak 2018-12-04T18:20:19.133Z,1543947619.133 [DataOverHttps](INFO): SBD MOMSN=8965478 2018-12-04T18:20:20.458Z,1543947620.458 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T18:20:20.458Z,1543947620.458 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T18:20:20.458Z,1543947620.458 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T18:20:24.162Z,1543947624.162 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:20:24.162Z,1543947624.162 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-04T18:20:24.162Z,1543947624.162 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:20:24.164Z,1543947624.164 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:20:24.165Z,1543947624.165 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-04T18:20:24.165Z,1543947624.165 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:20:24.178Z,1543947624.178 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:20:24.178Z,1543947624.178 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:20:24.574Z,1543947624.574 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:20:24.574Z,1543947624.574 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-04T18:20:24.575Z,1543947624.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:20:24.575Z,1543947624.575 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-04T18:20:24.957Z,1543947624.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:20:24.957Z,1543947624.957 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:20:24.957Z,1543947624.957 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:20:24.958Z,1543947624.958 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:20:24.958Z,1543947624.958 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:20:24.959Z,1543947624.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:20:48.531Z,1543947648.531 [NAL9602](INFO): Powering down 2018-12-04T18:21:38.077Z,1543947698.077 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T18:21:38.077Z,1543947698.077 [DropWeight] No Fault, FailCount= 1 2018-12-04T18:22:25.235Z,1543947745.235 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:22:25.235Z,1543947745.235 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-04T18:22:25.235Z,1543947745.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:22:25.237Z,1543947745.237 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:22:25.237Z,1543947745.237 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-04T18:22:25.237Z,1543947745.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:22:25.252Z,1543947745.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:22:25.252Z,1543947745.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:22:25.654Z,1543947745.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:22:25.654Z,1543947745.654 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-04T18:22:25.655Z,1543947745.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:22:25.655Z,1543947745.655 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-04T18:22:26.038Z,1543947746.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:22:26.039Z,1543947746.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:22:26.039Z,1543947746.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:22:26.040Z,1543947746.040 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:22:26.040Z,1543947746.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:22:26.040Z,1543947746.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:24:26.238Z,1543947866.238 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:24:26.239Z,1543947866.239 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-04T18:24:26.239Z,1543947866.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:24:26.241Z,1543947866.241 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:24:26.241Z,1543947866.241 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-04T18:24:26.241Z,1543947866.241 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:24:26.254Z,1543947866.254 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:24:26.254Z,1543947866.254 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:24:26.667Z,1543947866.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:24:26.667Z,1543947866.667 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-04T18:24:26.667Z,1543947866.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:24:26.667Z,1543947866.667 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-04T18:24:27.042Z,1543947867.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:24:27.042Z,1543947867.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:24:27.042Z,1543947867.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:24:27.043Z,1543947867.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:24:27.043Z,1543947867.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:24:27.044Z,1543947867.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:25:20.954Z,1543947920.954 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T18:25:20.955Z,1543947920.955 [Default:CheckIn:C.Wait] Stopped 2018-12-04T18:25:20.955Z,1543947920.955 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T18:25:20.955Z,1543947920.955 [Default:CheckIn:D] Running Loop=1 2018-12-04T18:25:21.362Z,1543947921.362 [Default:CheckIn:D] Stopped 2018-12-04T18:25:21.362Z,1543947921.362 [Default:CheckIn:E] Running Loop=1 2018-12-04T18:25:21.755Z,1543947921.755 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1270.488932 min 2018-12-04T18:25:21.755Z,1543947921.755 [Default:CheckIn:E] Stopped 2018-12-04T18:25:21.755Z,1543947921.755 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T18:25:21.755Z,1543947921.755 [Default:CheckIn] Stopped 2018-12-04T18:25:21.755Z,1543947921.755 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T18:25:21.755Z,1543947921.755 [Default:CheckIn](INFO): Running loop #124 2018-12-04T18:25:21.755Z,1543947921.755 [Default:CheckIn] Running Loop=124 2018-12-04T18:25:21.756Z,1543947921.756 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T18:25:21.756Z,1543947921.756 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T18:25:22.523Z,1543947922.523 [NAL9602](INFO): Powering up 2018-12-04T18:25:33.724Z,1543947933.724 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:25:34.524Z,1543947934.524 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T18:25:34.524Z,1543947934.524 [NAL9602] Data Fault, FailCount= 3 2018-12-04T18:25:34.524Z,1543947934.524 [NAL9602](ERROR): Data Fault 2018-12-04T18:25:34.595Z,1543947934.595 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T18:25:34.924Z,1543947934.924 [NAL9602](INFO): Powering down 2018-12-04T18:25:35.773Z,1543947935.773 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T18:25:35.773Z,1543947935.773 [NAL9602] No Fault, FailCount= 3 2018-12-04T18:26:04.944Z,1543947964.944 [NAL9602](INFO): Powering up NAL9602 2018-12-04T18:26:16.656Z,1543947976.656 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:26:27.090Z,1543947987.090 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:26:27.090Z,1543947987.090 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-04T18:26:27.090Z,1543947987.090 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:26:27.092Z,1543947987.092 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:26:27.092Z,1543947987.092 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-04T18:26:27.092Z,1543947987.092 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:26:27.106Z,1543947987.106 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:26:27.107Z,1543947987.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:26:27.500Z,1543947987.500 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:26:27.500Z,1543947987.500 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-04T18:26:27.501Z,1543947987.501 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:26:27.501Z,1543947987.501 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-04T18:26:27.875Z,1543947987.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:26:27.876Z,1543947987.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:26:27.876Z,1543947987.876 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:26:27.876Z,1543947987.876 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:26:27.877Z,1543947987.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:26:27.877Z,1543947987.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:28:19.664Z,1543948099.664 [BPC1](ERROR): BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file). 2018-12-04T18:28:28.063Z,1543948108.063 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:28:28.063Z,1543948108.063 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-04T18:28:28.063Z,1543948108.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:28:28.065Z,1543948108.065 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:28:28.065Z,1543948108.065 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-04T18:28:28.065Z,1543948108.065 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:28:28.079Z,1543948108.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:28:28.079Z,1543948108.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:28:28.473Z,1543948108.473 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:28:28.473Z,1543948108.473 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-04T18:28:28.474Z,1543948108.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:28:28.474Z,1543948108.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-04T18:28:28.861Z,1543948108.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:28:28.862Z,1543948108.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:28:28.862Z,1543948108.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:28:28.862Z,1543948108.862 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:28:28.863Z,1543948108.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:28:28.863Z,1543948108.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:30:22.716Z,1543948222.716 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T18:25:21.8Z 2018-12-04T18:30:22.716Z,1543948222.716 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T18:30:22.716Z,1543948222.716 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T18:30:27.680Z,1543948227.680 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0369.lzma 2018-12-04T18:30:28.482Z,1543948228.482 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0369.lzma.bak 2018-12-04T18:30:28.482Z,1543948228.482 [DataOverHttps](INFO): SBD MOMSN=8965505 2018-12-04T18:30:29.812Z,1543948229.812 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:30:29.812Z,1543948229.812 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-04T18:30:29.812Z,1543948229.812 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:30:29.814Z,1543948229.814 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:30:29.814Z,1543948229.814 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-04T18:30:29.814Z,1543948229.814 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:30:29.828Z,1543948229.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:30:29.828Z,1543948229.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:30:29.959Z,1543948229.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:30:29.959Z,1543948229.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-04T18:30:29.960Z,1543948229.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:30:29.960Z,1543948229.960 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-04T18:30:33.186Z,1543948233.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:30:33.186Z,1543948233.186 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:30:33.187Z,1543948233.187 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:30:33.187Z,1543948233.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:30:33.188Z,1543948233.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:30:33.188Z,1543948233.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:30:38.256Z,1543948238.256 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0370.lzma 2018-12-04T18:30:39.057Z,1543948239.057 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0370.lzma.bak 2018-12-04T18:30:39.057Z,1543948239.057 [DataOverHttps](INFO): SBD MOMSN=8965507 2018-12-04T18:30:40.394Z,1543948240.394 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T18:30:40.394Z,1543948240.394 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T18:30:40.394Z,1543948240.394 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T18:31:19.207Z,1543948279.207 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T18:31:49.795Z,1543948309.795 [NAL9602](INFO): Powering down 2018-12-04T18:32:33.579Z,1543948353.579 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:32:33.579Z,1543948353.579 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-04T18:32:33.579Z,1543948353.579 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:32:33.581Z,1543948353.581 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:32:33.581Z,1543948353.581 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-04T18:32:33.582Z,1543948353.582 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:32:33.628Z,1543948353.628 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:32:33.629Z,1543948353.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:32:33.991Z,1543948353.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:32:33.991Z,1543948353.991 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-04T18:32:33.992Z,1543948353.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:32:33.992Z,1543948353.992 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-04T18:32:34.382Z,1543948354.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:32:34.383Z,1543948354.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:32:34.383Z,1543948354.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:32:34.384Z,1543948354.384 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:32:34.384Z,1543948354.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:32:34.384Z,1543948354.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:33:18.738Z,1543948398.738 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T18:34:34.628Z,1543948474.628 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:34:34.628Z,1543948474.628 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-04T18:34:34.628Z,1543948474.628 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:34:34.630Z,1543948474.630 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:34:34.630Z,1543948474.630 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-04T18:34:34.630Z,1543948474.630 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:34:34.643Z,1543948474.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:34:34.644Z,1543948474.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:34:35.042Z,1543948475.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:34:35.042Z,1543948475.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-04T18:34:35.043Z,1543948475.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:34:35.043Z,1543948475.043 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-04T18:34:35.434Z,1543948475.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:34:35.435Z,1543948475.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:34:35.435Z,1543948475.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:34:35.436Z,1543948475.436 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:34:35.436Z,1543948475.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:34:35.437Z,1543948475.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:35:40.814Z,1543948540.814 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T18:35:40.815Z,1543948540.815 [Default:CheckIn:C.Wait] Stopped 2018-12-04T18:35:40.815Z,1543948540.815 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T18:35:40.815Z,1543948540.815 [Default:CheckIn:D] Running Loop=1 2018-12-04T18:35:41.218Z,1543948541.218 [Default:CheckIn:D] Stopped 2018-12-04T18:35:41.218Z,1543948541.218 [Default:CheckIn:E] Running Loop=1 2018-12-04T18:35:41.615Z,1543948541.615 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1280.819922 min 2018-12-04T18:35:41.615Z,1543948541.615 [Default:CheckIn:E] Stopped 2018-12-04T18:35:41.615Z,1543948541.615 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T18:35:41.615Z,1543948541.615 [Default:CheckIn] Stopped 2018-12-04T18:35:41.615Z,1543948541.615 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T18:35:41.616Z,1543948541.616 [Default:CheckIn](INFO): Running loop #125 2018-12-04T18:35:41.616Z,1543948541.616 [Default:CheckIn] Running Loop=125 2018-12-04T18:35:41.616Z,1543948541.616 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T18:35:41.616Z,1543948541.616 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T18:35:42.383Z,1543948542.383 [NAL9602](INFO): Powering up 2018-12-04T18:35:53.588Z,1543948553.588 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:36:25.548Z,1543948585.548 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T18:36:25.622Z,1543948585.622 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T18:36:25.622Z,1543948585.622 [NAL9602] Data Fault, FailCount= 4 2018-12-04T18:36:25.622Z,1543948585.622 [NAL9602](ERROR): Data Fault 2018-12-04T18:36:25.677Z,1543948585.677 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T18:36:25.948Z,1543948585.948 [NAL9602](INFO): Powering down 2018-12-04T18:36:26.812Z,1543948586.812 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T18:36:26.812Z,1543948586.812 [NAL9602] No Fault, FailCount= 4 2018-12-04T18:36:36.260Z,1543948596.260 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:36:36.260Z,1543948596.260 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-04T18:36:36.260Z,1543948596.260 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:36:36.262Z,1543948596.262 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:36:36.262Z,1543948596.262 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-04T18:36:36.262Z,1543948596.262 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:36:36.275Z,1543948596.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:36:36.275Z,1543948596.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:36:36.457Z,1543948596.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:36:36.457Z,1543948596.457 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-04T18:36:36.457Z,1543948596.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:36:36.457Z,1543948596.457 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-04T18:36:36.713Z,1543948596.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:36:36.713Z,1543948596.713 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:36:36.714Z,1543948596.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:36:36.714Z,1543948596.714 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:36:36.715Z,1543948596.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:36:36.715Z,1543948596.715 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:36:56.288Z,1543948616.288 [NAL9602](INFO): Powering up NAL9602 2018-12-04T18:37:07.488Z,1543948627.488 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:37:08.292Z,1543948628.292 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T18:37:08.292Z,1543948628.292 [NAL9602] Data Fault, FailCount= 5 2018-12-04T18:37:08.292Z,1543948628.292 [NAL9602](ERROR): Data Fault 2018-12-04T18:37:08.364Z,1543948628.364 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T18:37:08.364Z,1543948628.364 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T18:37:11.388Z,1543948631.388 [NAL9602](INFO): Powering down 2018-12-04T18:37:11.438Z,1543948631.438 [CBIT](INFO): Critical error at 20181204T183708 2018-12-04T18:38:36.899Z,1543948716.899 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:38:36.899Z,1543948716.899 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-04T18:38:36.899Z,1543948716.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:38:36.901Z,1543948716.901 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:38:36.901Z,1543948716.901 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-04T18:38:36.901Z,1543948716.901 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:38:36.914Z,1543948716.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:38:36.915Z,1543948716.915 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:38:37.303Z,1543948717.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:38:37.303Z,1543948717.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-04T18:38:37.304Z,1543948717.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:38:37.304Z,1543948717.304 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-04T18:38:37.698Z,1543948717.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:38:37.698Z,1543948717.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:38:37.699Z,1543948717.699 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:38:37.699Z,1543948717.699 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:38:37.699Z,1543948717.699 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:38:37.700Z,1543948717.700 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:39:08.472Z,1543948748.472 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T18:39:08.472Z,1543948748.472 [NAL9602] No Fault, FailCount= 5 2018-12-04T18:39:08.828Z,1543948748.828 [NAL9602](INFO): Powering up NAL9602 2018-12-04T18:39:20.028Z,1543948760.028 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:40:37.971Z,1543948837.971 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:40:37.972Z,1543948837.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-04T18:40:37.972Z,1543948837.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:40:37.974Z,1543948837.974 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:40:37.974Z,1543948837.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-04T18:40:37.974Z,1543948837.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:40:38.012Z,1543948838.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:40:38.012Z,1543948838.012 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:40:38.414Z,1543948838.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:40:38.414Z,1543948838.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-04T18:40:38.415Z,1543948838.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:40:38.415Z,1543948838.415 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-04T18:40:38.774Z,1543948838.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:40:38.775Z,1543948838.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:40:38.775Z,1543948838.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:40:38.776Z,1543948838.776 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:40:38.776Z,1543948838.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:40:38.776Z,1543948838.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:40:42.859Z,1543948842.859 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T18:35:41.6Z 2018-12-04T18:40:42.859Z,1543948842.859 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T18:40:42.859Z,1543948842.859 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T18:40:47.851Z,1543948847.851 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20181203T211451/Courier0372.lzma 2018-12-04T18:40:48.649Z,1543948848.649 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0372.lzma.bak 2018-12-04T18:40:48.649Z,1543948848.649 [DataOverHttps](INFO): SBD MOMSN=8965538 2018-12-04T18:40:58.017Z,1543948858.017 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T18:40:58.097Z,1543948858.097 [DataOverHttps](INFO): Sending 356 bytes from file Logs/20181203T211451/Express0373.lzma 2018-12-04T18:40:58.874Z,1543948858.874 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0373.lzma.bak 2018-12-04T18:40:58.874Z,1543948858.874 [DataOverHttps](INFO): SBD MOMSN=8965541 2018-12-04T18:41:00.217Z,1543948860.217 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T18:41:00.217Z,1543948860.217 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T18:41:00.217Z,1543948860.217 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T18:41:28.161Z,1543948888.161 [NAL9602](INFO): Powering down 2018-12-04T18:42:39.033Z,1543948959.033 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:42:39.034Z,1543948959.034 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-04T18:42:39.034Z,1543948959.034 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:42:39.036Z,1543948959.036 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:42:39.036Z,1543948959.036 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-04T18:42:39.036Z,1543948959.036 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:42:39.050Z,1543948959.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:42:39.050Z,1543948959.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:42:39.458Z,1543948959.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:42:39.458Z,1543948959.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-04T18:42:39.459Z,1543948959.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:42:39.459Z,1543948959.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-04T18:42:39.846Z,1543948959.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:42:39.846Z,1543948959.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:42:39.847Z,1543948959.847 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:42:39.847Z,1543948959.847 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:42:39.847Z,1543948959.847 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:42:39.848Z,1543948959.848 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:44:39.953Z,1543949079.953 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:44:39.953Z,1543949079.953 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-04T18:44:39.953Z,1543949079.953 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:44:39.955Z,1543949079.955 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:44:39.956Z,1543949079.956 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-04T18:44:39.956Z,1543949079.956 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:44:39.969Z,1543949079.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:44:39.969Z,1543949079.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:44:40.364Z,1543949080.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:44:40.364Z,1543949080.364 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-04T18:44:40.364Z,1543949080.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:44:40.364Z,1543949080.365 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-04T18:44:40.758Z,1543949080.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:44:40.758Z,1543949080.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:44:40.759Z,1543949080.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:44:40.759Z,1543949080.759 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:44:40.759Z,1543949080.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:44:40.760Z,1543949080.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:46:00.681Z,1543949160.681 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T18:46:00.681Z,1543949160.681 [Default:CheckIn:C.Wait] Stopped 2018-12-04T18:46:00.681Z,1543949160.681 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T18:46:00.681Z,1543949160.681 [Default:CheckIn:D] Running Loop=1 2018-12-04T18:46:01.075Z,1543949161.075 [Default:CheckIn:D] Stopped 2018-12-04T18:46:01.075Z,1543949161.075 [Default:CheckIn:E] Running Loop=1 2018-12-04T18:46:01.482Z,1543949161.482 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1291.150911 min 2018-12-04T18:46:01.482Z,1543949161.482 [Default:CheckIn:E] Stopped 2018-12-04T18:46:01.483Z,1543949161.483 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T18:46:01.483Z,1543949161.483 [Default:CheckIn] Stopped 2018-12-04T18:46:01.483Z,1543949161.483 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T18:46:01.483Z,1543949161.483 [Default:CheckIn](INFO): Running loop #126 2018-12-04T18:46:01.483Z,1543949161.483 [Default:CheckIn] Running Loop=126 2018-12-04T18:46:01.483Z,1543949161.483 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T18:46:01.483Z,1543949161.483 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T18:46:02.245Z,1543949162.245 [NAL9602](INFO): Powering up 2018-12-04T18:46:13.048Z,1543949173.048 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:46:40.794Z,1543949200.794 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:46:40.794Z,1543949200.794 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-04T18:46:40.794Z,1543949200.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:46:40.797Z,1543949200.797 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:46:40.797Z,1543949200.797 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-04T18:46:40.797Z,1543949200.797 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:46:40.810Z,1543949200.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:46:40.811Z,1543949200.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:46:41.211Z,1543949201.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:46:41.211Z,1543949201.211 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-04T18:46:41.212Z,1543949201.212 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:46:41.212Z,1543949201.212 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-04T18:46:41.598Z,1543949201.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:46:41.598Z,1543949201.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:46:41.599Z,1543949201.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:46:41.599Z,1543949201.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:46:41.599Z,1543949201.599 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:46:41.600Z,1543949201.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:46:44.768Z,1543949204.768 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T18:46:44.850Z,1543949204.850 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T18:46:44.850Z,1543949204.850 [NAL9602] Data Fault, FailCount= 1 2018-12-04T18:46:44.850Z,1543949204.850 [NAL9602](ERROR): Data Fault 2018-12-04T18:46:44.918Z,1543949204.918 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T18:46:45.168Z,1543949205.168 [NAL9602](INFO): Powering down 2018-12-04T18:46:46.010Z,1543949206.010 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T18:46:46.010Z,1543949206.010 [NAL9602] No Fault, FailCount= 1 2018-12-04T18:47:15.182Z,1543949235.182 [NAL9602](INFO): Powering up NAL9602 2018-12-04T18:47:25.988Z,1543949245.988 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:48:41.606Z,1543949321.606 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:48:41.607Z,1543949321.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-04T18:48:41.607Z,1543949321.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:48:41.609Z,1543949321.609 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:48:41.609Z,1543949321.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-04T18:48:41.609Z,1543949321.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:48:41.623Z,1543949321.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:48:41.623Z,1543949321.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:48:41.970Z,1543949321.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:48:41.970Z,1543949321.970 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-04T18:48:41.970Z,1543949321.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:48:41.970Z,1543949321.970 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-04T18:48:42.344Z,1543949322.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:48:42.344Z,1543949322.344 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:48:42.345Z,1543949322.345 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:48:42.345Z,1543949322.345 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:48:42.346Z,1543949322.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:48:42.346Z,1543949322.346 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:50:42.551Z,1543949442.551 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:50:42.551Z,1543949442.551 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-04T18:50:42.551Z,1543949442.551 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:50:42.553Z,1543949442.553 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:50:42.553Z,1543949442.553 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-04T18:50:42.553Z,1543949442.553 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:50:42.587Z,1543949442.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:50:42.587Z,1543949442.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:50:42.962Z,1543949442.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:50:42.962Z,1543949442.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-04T18:50:42.963Z,1543949442.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:50:42.963Z,1543949442.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-04T18:50:43.340Z,1543949443.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:50:43.340Z,1543949443.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:50:43.340Z,1543949443.340 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:50:43.341Z,1543949443.341 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:50:43.341Z,1543949443.341 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:50:43.342Z,1543949443.342 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:51:02.451Z,1543949462.451 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T18:46:01.5Z 2018-12-04T18:51:02.451Z,1543949462.451 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T18:51:02.451Z,1543949462.451 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T18:51:07.396Z,1543949467.396 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0375.lzma 2018-12-04T18:51:08.177Z,1543949468.177 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0375.lzma.bak 2018-12-04T18:51:08.177Z,1543949468.177 [DataOverHttps](INFO): SBD MOMSN=8965575 2018-12-04T18:51:17.677Z,1543949477.677 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T18:51:17.770Z,1543949477.770 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20181203T211451/Express0376.lzma 2018-12-04T18:51:18.529Z,1543949478.529 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0376.lzma.bak 2018-12-04T18:51:18.529Z,1543949478.529 [DataOverHttps](INFO): SBD MOMSN=8965577 2018-12-04T18:51:19.864Z,1543949479.864 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T18:51:19.864Z,1543949479.864 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T18:51:19.864Z,1543949479.864 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T18:51:39.463Z,1543949499.463 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T18:51:39.463Z,1543949499.463 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T18:51:39.463Z,1543949499.463 [DropWeight](ERROR): Hardware Fault 2018-12-04T18:51:39.522Z,1543949499.522 [CBIT](INFO): Critical error at 20181204T185139 2018-12-04T18:51:39.524Z,1543949499.524 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T18:51:39.525Z,1543949499.525 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T18:51:39.906Z,1543949499.906 [CBIT](INFO): Critical error at 20181204T185139 2018-12-04T18:51:47.861Z,1543949507.861 [NAL9602](INFO): Powering down 2018-12-04T18:52:43.617Z,1543949563.617 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:52:43.617Z,1543949563.617 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-04T18:52:43.617Z,1543949563.617 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:52:43.620Z,1543949563.620 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:52:43.620Z,1543949563.620 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-04T18:52:43.620Z,1543949563.620 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:52:43.633Z,1543949563.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:52:43.633Z,1543949563.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:52:44.025Z,1543949564.025 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:52:44.025Z,1543949564.025 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-04T18:52:44.026Z,1543949564.026 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:52:44.026Z,1543949564.026 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-04T18:52:44.417Z,1543949564.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:52:44.417Z,1543949564.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:52:44.418Z,1543949564.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:52:44.418Z,1543949564.418 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:52:44.419Z,1543949564.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:52:44.419Z,1543949564.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:54:44.694Z,1543949684.694 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:54:44.694Z,1543949684.694 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-04T18:54:44.694Z,1543949684.694 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:54:44.696Z,1543949684.696 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:54:44.696Z,1543949684.696 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-04T18:54:44.697Z,1543949684.697 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:54:44.710Z,1543949684.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:54:44.711Z,1543949684.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:54:45.098Z,1543949685.098 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:54:45.098Z,1543949685.098 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-04T18:54:45.099Z,1543949685.099 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:54:45.099Z,1543949685.099 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-04T18:54:45.494Z,1543949685.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:54:45.494Z,1543949685.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:54:45.495Z,1543949685.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:54:45.495Z,1543949685.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:54:45.495Z,1543949685.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:54:45.496Z,1543949685.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:56:20.014Z,1543949780.014 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T18:56:20.014Z,1543949780.014 [Default:CheckIn:C.Wait] Stopped 2018-12-04T18:56:20.014Z,1543949780.014 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T18:56:20.014Z,1543949780.014 [Default:CheckIn:D] Running Loop=1 2018-12-04T18:56:20.414Z,1543949780.414 [Default:CheckIn:D] Stopped 2018-12-04T18:56:20.414Z,1543949780.414 [Default:CheckIn:E] Running Loop=1 2018-12-04T18:56:20.814Z,1543949780.814 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1301.473177 min 2018-12-04T18:56:20.814Z,1543949780.814 [Default:CheckIn:E] Stopped 2018-12-04T18:56:20.815Z,1543949780.815 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T18:56:20.815Z,1543949780.815 [Default:CheckIn] Stopped 2018-12-04T18:56:20.815Z,1543949780.815 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T18:56:20.815Z,1543949780.815 [Default:CheckIn](INFO): Running loop #127 2018-12-04T18:56:20.815Z,1543949780.815 [Default:CheckIn] Running Loop=127 2018-12-04T18:56:20.815Z,1543949780.815 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T18:56:20.815Z,1543949780.815 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T18:56:21.579Z,1543949781.579 [NAL9602](INFO): Powering up 2018-12-04T18:56:32.779Z,1543949792.779 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:56:33.584Z,1543949793.584 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T18:56:33.584Z,1543949793.584 [NAL9602] Data Fault, FailCount= 2 2018-12-04T18:56:33.584Z,1543949793.584 [NAL9602](ERROR): Data Fault 2018-12-04T18:56:33.662Z,1543949793.662 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T18:56:33.979Z,1543949793.979 [NAL9602](INFO): Powering down 2018-12-04T18:56:34.825Z,1543949794.825 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T18:56:34.825Z,1543949794.825 [NAL9602] No Fault, FailCount= 2 2018-12-04T18:56:45.562Z,1543949805.562 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:56:45.562Z,1543949805.562 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-04T18:56:45.562Z,1543949805.562 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:56:45.564Z,1543949805.564 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:56:45.564Z,1543949805.564 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-04T18:56:45.565Z,1543949805.565 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:56:45.578Z,1543949805.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:56:45.578Z,1543949805.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:56:45.967Z,1543949805.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:56:45.968Z,1543949805.968 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-04T18:56:45.968Z,1543949805.968 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:56:45.968Z,1543949805.968 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-04T18:56:46.354Z,1543949806.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:56:46.355Z,1543949806.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:56:46.355Z,1543949806.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:56:46.356Z,1543949806.356 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:56:46.356Z,1543949806.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:56:46.356Z,1543949806.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:57:04.331Z,1543949824.331 [NAL9602](INFO): Powering up NAL9602 2018-12-04T18:57:15.883Z,1543949835.883 [NAL9602](INFO): NAL9602 initialized 2018-12-04T18:58:46.457Z,1543949926.457 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:58:46.457Z,1543949926.457 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-04T18:58:46.457Z,1543949926.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T18:58:46.468Z,1543949926.468 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T18:58:46.468Z,1543949926.468 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-04T18:58:46.468Z,1543949926.468 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T18:58:46.494Z,1543949926.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T18:58:46.494Z,1543949926.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T18:58:46.892Z,1543949926.892 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T18:58:46.892Z,1543949926.892 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-04T18:58:46.893Z,1543949926.893 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T18:58:46.893Z,1543949926.893 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-04T18:58:47.266Z,1543949927.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T18:58:47.283Z,1543949927.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:58:47.283Z,1543949927.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T18:58:47.287Z,1543949927.287 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T18:58:47.288Z,1543949927.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T18:58:47.288Z,1543949927.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:00:47.594Z,1543950047.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:00:47.594Z,1543950047.594 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-04T19:00:47.594Z,1543950047.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:00:47.596Z,1543950047.596 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:00:47.596Z,1543950047.596 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-04T19:00:47.596Z,1543950047.596 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:00:47.610Z,1543950047.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:00:47.610Z,1543950047.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:00:48.022Z,1543950048.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:00:48.023Z,1543950048.023 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-04T19:00:48.023Z,1543950048.023 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:00:48.023Z,1543950048.023 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-04T19:00:48.406Z,1543950048.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:00:48.406Z,1543950048.406 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:00:48.407Z,1543950048.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:00:48.407Z,1543950048.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:00:48.407Z,1543950048.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:00:48.408Z,1543950048.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:01:22.026Z,1543950082.026 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T18:56:20.8Z 2018-12-04T19:01:22.026Z,1543950082.026 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T19:01:22.027Z,1543950082.027 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T19:01:27.027Z,1543950087.027 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0378.lzma 2018-12-04T19:01:27.797Z,1543950087.797 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0378.lzma.bak 2018-12-04T19:01:27.797Z,1543950087.797 [DataOverHttps](INFO): SBD MOMSN=8965606 2018-12-04T19:01:37.250Z,1543950097.250 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0379.lzma 2018-12-04T19:01:38.052Z,1543950098.052 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0379.lzma.bak 2018-12-04T19:01:38.053Z,1543950098.053 [DataOverHttps](INFO): SBD MOMSN=8965610 2018-12-04T19:01:39.406Z,1543950099.406 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T19:01:39.406Z,1543950099.406 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T19:01:39.406Z,1543950099.406 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T19:02:19.087Z,1543950139.087 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T19:02:48.701Z,1543950168.701 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:02:48.701Z,1543950168.701 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-04T19:02:48.701Z,1543950168.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:02:48.704Z,1543950168.704 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:02:48.704Z,1543950168.704 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-04T19:02:48.704Z,1543950168.704 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:02:48.717Z,1543950168.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:02:48.717Z,1543950168.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:02:49.117Z,1543950169.117 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:02:49.118Z,1543950169.118 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-04T19:02:49.118Z,1543950169.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:02:49.118Z,1543950169.118 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-04T19:02:49.479Z,1543950169.479 [NAL9602](INFO): Powering down 2018-12-04T19:02:49.518Z,1543950169.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:02:49.523Z,1543950169.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:02:49.523Z,1543950169.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:02:49.523Z,1543950169.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:02:49.524Z,1543950169.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:02:49.524Z,1543950169.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:04:49.690Z,1543950289.690 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:04:49.690Z,1543950289.690 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-04T19:04:49.691Z,1543950289.691 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:04:49.693Z,1543950289.693 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:04:49.693Z,1543950289.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-04T19:04:49.693Z,1543950289.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:04:49.706Z,1543950289.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:04:49.706Z,1543950289.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:04:50.110Z,1543950290.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:04:50.110Z,1543950290.110 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-04T19:04:50.111Z,1543950290.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:04:50.111Z,1543950290.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-04T19:04:50.478Z,1543950290.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:04:50.478Z,1543950290.478 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:04:50.479Z,1543950290.479 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:04:50.479Z,1543950290.479 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:04:50.480Z,1543950290.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:04:50.480Z,1543950290.480 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:06:39.770Z,1543950399.770 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T19:06:39.770Z,1543950399.770 [Default:CheckIn:C.Wait] Stopped 2018-12-04T19:06:39.770Z,1543950399.770 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T19:06:39.770Z,1543950399.770 [Default:CheckIn:D] Running Loop=1 2018-12-04T19:06:39.783Z,1543950399.783 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T19:06:39.783Z,1543950399.783 [DropWeight] No Fault, FailCount= 1 2018-12-04T19:06:40.205Z,1543950400.205 [Default:CheckIn:D] Stopped 2018-12-04T19:06:40.205Z,1543950400.205 [Default:CheckIn:E] Running Loop=1 2018-12-04T19:06:40.578Z,1543950400.578 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1311.802995 min 2018-12-04T19:06:40.583Z,1543950400.583 [Default:CheckIn:E] Stopped 2018-12-04T19:06:40.583Z,1543950400.583 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T19:06:40.583Z,1543950400.583 [Default:CheckIn] Stopped 2018-12-04T19:06:40.583Z,1543950400.583 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T19:06:40.583Z,1543950400.583 [Default:CheckIn](INFO): Running loop #128 2018-12-04T19:06:40.584Z,1543950400.584 [Default:CheckIn] Running Loop=128 2018-12-04T19:06:40.584Z,1543950400.584 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T19:06:40.584Z,1543950400.584 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T19:06:41.343Z,1543950401.343 [NAL9602](INFO): Powering up 2018-12-04T19:06:50.566Z,1543950410.566 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:06:50.566Z,1543950410.566 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-04T19:06:50.566Z,1543950410.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:06:50.568Z,1543950410.568 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:06:50.569Z,1543950410.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-04T19:06:50.569Z,1543950410.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:06:50.583Z,1543950410.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:06:50.583Z,1543950410.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:06:50.985Z,1543950410.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:06:50.985Z,1543950410.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-04T19:06:50.986Z,1543950410.986 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:06:50.986Z,1543950410.986 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-04T19:06:51.358Z,1543950411.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:06:51.359Z,1543950411.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:06:51.359Z,1543950411.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:06:51.359Z,1543950411.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:06:51.360Z,1543950411.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:06:51.360Z,1543950411.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:06:52.540Z,1543950412.540 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:08:51.375Z,1543950531.375 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:08:51.375Z,1543950531.375 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-04T19:08:51.375Z,1543950531.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:08:51.377Z,1543950531.377 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:08:51.377Z,1543950531.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-04T19:08:51.377Z,1543950531.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:08:51.391Z,1543950531.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:08:51.391Z,1543950531.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:08:51.838Z,1543950531.838 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:08:51.838Z,1543950531.838 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-04T19:08:51.839Z,1543950531.839 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:08:51.839Z,1543950531.839 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-04T19:08:52.201Z,1543950532.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:08:52.201Z,1543950532.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:08:52.202Z,1543950532.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:08:52.202Z,1543950532.202 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:08:52.203Z,1543950532.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:08:52.203Z,1543950532.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:10:52.254Z,1543950652.254 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:10:52.254Z,1543950652.254 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-04T19:10:52.254Z,1543950652.254 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:10:52.257Z,1543950652.257 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:10:52.257Z,1543950652.257 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-04T19:10:52.257Z,1543950652.257 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:10:52.270Z,1543950652.270 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:10:52.270Z,1543950652.270 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:10:52.668Z,1543950652.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:10:52.669Z,1543950652.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-04T19:10:52.669Z,1543950652.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:10:52.669Z,1543950652.669 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-04T19:10:53.062Z,1543950653.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:10:53.062Z,1543950653.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:10:53.063Z,1543950653.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:10:53.063Z,1543950653.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:10:53.064Z,1543950653.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:10:53.064Z,1543950653.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:11:41.794Z,1543950701.794 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T19:06:40.6Z 2018-12-04T19:11:41.795Z,1543950701.795 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T19:11:41.795Z,1543950701.795 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T19:11:46.746Z,1543950706.746 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0381.lzma 2018-12-04T19:11:47.541Z,1543950707.541 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0381.lzma.bak 2018-12-04T19:11:47.541Z,1543950707.541 [DataOverHttps](INFO): SBD MOMSN=8965642 2018-12-04T19:11:57.458Z,1543950717.458 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T19:11:57.544Z,1543950717.544 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0382.lzma 2018-12-04T19:11:58.329Z,1543950718.329 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0382.lzma.bak 2018-12-04T19:11:58.329Z,1543950718.329 [DataOverHttps](INFO): SBD MOMSN=8965644 2018-12-04T19:11:59.770Z,1543950719.770 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T19:11:59.770Z,1543950719.770 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T19:11:59.770Z,1543950719.770 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T19:12:27.761Z,1543950747.761 [NAL9602](INFO): Powering down 2018-12-04T19:12:53.316Z,1543950773.316 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:12:53.316Z,1543950773.316 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-04T19:12:53.316Z,1543950773.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:12:53.318Z,1543950773.318 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:12:53.318Z,1543950773.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-04T19:12:53.318Z,1543950773.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:12:53.332Z,1543950773.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:12:53.332Z,1543950773.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:12:53.727Z,1543950773.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:12:53.727Z,1543950773.727 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-04T19:12:53.727Z,1543950773.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:12:53.727Z,1543950773.727 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-04T19:12:54.118Z,1543950774.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:12:54.118Z,1543950774.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:12:54.119Z,1543950774.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:12:54.119Z,1543950774.119 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:12:54.120Z,1543950774.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:12:54.120Z,1543950774.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:14:54.262Z,1543950894.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:14:54.262Z,1543950894.262 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-04T19:14:54.262Z,1543950894.262 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:14:54.264Z,1543950894.264 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:14:54.264Z,1543950894.264 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-04T19:14:54.265Z,1543950894.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:14:54.278Z,1543950894.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:14:54.278Z,1543950894.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:14:54.685Z,1543950894.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:14:54.685Z,1543950894.685 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-04T19:14:54.685Z,1543950894.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:14:54.685Z,1543950894.685 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-04T19:14:55.070Z,1543950895.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:14:55.070Z,1543950895.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:14:55.071Z,1543950895.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:14:55.071Z,1543950895.071 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:14:55.071Z,1543950895.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:14:55.072Z,1543950895.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:16:55.111Z,1543951015.111 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:16:55.111Z,1543951015.111 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-04T19:16:55.111Z,1543951015.111 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:16:55.113Z,1543951015.113 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:16:55.113Z,1543951015.113 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-04T19:16:55.113Z,1543951015.113 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:16:55.126Z,1543951015.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:16:55.127Z,1543951015.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:16:55.530Z,1543951015.530 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:16:55.530Z,1543951015.530 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-04T19:16:55.531Z,1543951015.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:16:55.531Z,1543951015.531 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-04T19:16:55.911Z,1543951015.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:16:55.911Z,1543951015.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:16:55.911Z,1543951015.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:16:55.912Z,1543951015.912 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:16:55.912Z,1543951015.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:16:55.912Z,1543951015.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:16:59.918Z,1543951019.918 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T19:16:59.918Z,1543951019.918 [Default:CheckIn:C.Wait] Stopped 2018-12-04T19:16:59.918Z,1543951019.918 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T19:16:59.918Z,1543951019.918 [Default:CheckIn:D] Running Loop=1 2018-12-04T19:17:00.376Z,1543951020.376 [Default:CheckIn:D] Stopped 2018-12-04T19:17:00.376Z,1543951020.376 [Default:CheckIn:E] Running Loop=1 2018-12-04T19:17:00.720Z,1543951020.720 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1322.139193 min 2018-12-04T19:17:00.720Z,1543951020.720 [Default:CheckIn:E] Stopped 2018-12-04T19:17:00.721Z,1543951020.721 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T19:17:00.721Z,1543951020.721 [Default:CheckIn] Stopped 2018-12-04T19:17:00.721Z,1543951020.721 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T19:17:00.721Z,1543951020.721 [Default:CheckIn](INFO): Running loop #129 2018-12-04T19:17:00.721Z,1543951020.721 [Default:CheckIn] Running Loop=129 2018-12-04T19:17:00.721Z,1543951020.721 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T19:17:00.721Z,1543951020.721 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T19:17:01.488Z,1543951021.488 [NAL9602](INFO): Powering up 2018-12-04T19:17:12.288Z,1543951032.288 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:17:13.088Z,1543951033.088 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T19:17:13.088Z,1543951033.088 [NAL9602] Data Fault, FailCount= 3 2018-12-04T19:17:13.088Z,1543951033.088 [NAL9602](ERROR): Data Fault 2018-12-04T19:17:13.150Z,1543951033.150 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T19:17:13.487Z,1543951033.487 [NAL9602](INFO): Powering down 2018-12-04T19:17:14.336Z,1543951034.336 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T19:17:14.336Z,1543951034.336 [NAL9602] No Fault, FailCount= 3 2018-12-04T19:17:43.516Z,1543951063.516 [NAL9602](INFO): Powering up NAL9602 2018-12-04T19:17:55.883Z,1543951075.883 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:18:56.308Z,1543951136.308 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:18:56.308Z,1543951136.308 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-04T19:18:56.308Z,1543951136.308 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:18:56.311Z,1543951136.311 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:18:56.311Z,1543951136.311 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-04T19:18:56.311Z,1543951136.311 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:18:56.324Z,1543951136.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:18:56.324Z,1543951136.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:18:56.720Z,1543951136.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:18:56.720Z,1543951136.720 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-04T19:18:56.721Z,1543951136.721 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:18:56.721Z,1543951136.721 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-04T19:18:57.106Z,1543951137.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:18:57.106Z,1543951137.106 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:18:57.107Z,1543951137.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:18:57.107Z,1543951137.107 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:18:57.108Z,1543951137.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:18:57.108Z,1543951137.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:20:57.270Z,1543951257.270 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:20:57.271Z,1543951257.271 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-04T19:20:57.271Z,1543951257.271 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:20:57.273Z,1543951257.273 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:20:57.273Z,1543951257.273 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-04T19:20:57.273Z,1543951257.273 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:20:57.287Z,1543951257.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:20:57.287Z,1543951257.287 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:20:57.699Z,1543951257.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:20:57.699Z,1543951257.699 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-04T19:20:57.699Z,1543951257.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:20:57.699Z,1543951257.699 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-04T19:20:58.078Z,1543951258.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:20:58.078Z,1543951258.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:20:58.079Z,1543951258.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:20:58.079Z,1543951258.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:20:58.080Z,1543951258.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:20:58.080Z,1543951258.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:22:01.945Z,1543951321.945 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T19:17:00.7Z 2018-12-04T19:22:01.945Z,1543951321.945 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T19:22:01.945Z,1543951321.945 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T19:22:07.053Z,1543951327.053 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0384.lzma 2018-12-04T19:22:07.833Z,1543951327.833 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0384.lzma.bak 2018-12-04T19:22:07.833Z,1543951327.833 [DataOverHttps](INFO): SBD MOMSN=8965672 2018-12-04T19:22:17.132Z,1543951337.132 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0385.lzma 2018-12-04T19:22:17.933Z,1543951337.933 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0385.lzma.bak 2018-12-04T19:22:17.934Z,1543951337.934 [DataOverHttps](INFO): SBD MOMSN=8965674 2018-12-04T19:22:19.414Z,1543951339.414 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T19:22:19.414Z,1543951339.414 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T19:22:19.414Z,1543951339.414 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T19:22:58.283Z,1543951378.283 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:22:58.283Z,1543951378.283 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-04T19:22:58.283Z,1543951378.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:22:58.285Z,1543951378.285 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:22:58.285Z,1543951378.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-04T19:22:58.285Z,1543951378.285 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:22:58.299Z,1543951378.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:22:58.299Z,1543951378.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:22:58.415Z,1543951378.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:22:58.415Z,1543951378.415 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-04T19:22:58.416Z,1543951378.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:22:58.416Z,1543951378.416 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-04T19:22:58.716Z,1543951378.716 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T19:22:58.746Z,1543951378.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:22:58.747Z,1543951378.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:22:58.747Z,1543951378.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:22:58.748Z,1543951378.748 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:22:58.748Z,1543951378.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:22:58.748Z,1543951378.748 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:23:29.511Z,1543951409.511 [NAL9602](INFO): Powering down 2018-12-04T19:24:58.766Z,1543951498.766 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:24:58.766Z,1543951498.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-04T19:24:58.767Z,1543951498.767 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:24:58.769Z,1543951498.769 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:24:58.769Z,1543951498.769 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-04T19:24:58.769Z,1543951498.769 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:24:58.782Z,1543951498.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:24:58.782Z,1543951498.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:24:59.170Z,1543951499.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:24:59.170Z,1543951499.170 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-04T19:24:59.171Z,1543951499.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:24:59.171Z,1543951499.171 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-04T19:24:59.559Z,1543951499.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:24:59.559Z,1543951499.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:24:59.559Z,1543951499.559 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:24:59.560Z,1543951499.560 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:24:59.560Z,1543951499.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:24:59.560Z,1543951499.560 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:26:59.950Z,1543951619.950 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:26:59.950Z,1543951619.950 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-04T19:26:59.950Z,1543951619.950 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:26:59.952Z,1543951619.952 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:26:59.953Z,1543951619.953 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-04T19:26:59.953Z,1543951619.953 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:26:59.966Z,1543951619.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:26:59.966Z,1543951619.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:27:00.356Z,1543951620.356 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:27:00.356Z,1543951620.356 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-04T19:27:00.357Z,1543951620.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:27:00.357Z,1543951620.357 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-04T19:27:00.745Z,1543951620.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:27:00.746Z,1543951620.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:27:00.746Z,1543951620.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:27:00.747Z,1543951620.747 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:27:00.747Z,1543951620.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:27:00.747Z,1543951620.747 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:27:19.903Z,1543951639.903 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T19:27:19.903Z,1543951639.903 [Default:CheckIn:C.Wait] Stopped 2018-12-04T19:27:19.903Z,1543951639.903 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T19:27:19.903Z,1543951639.903 [Default:CheckIn:D] Running Loop=1 2018-12-04T19:27:20.303Z,1543951640.303 [Default:CheckIn:D] Stopped 2018-12-04T19:27:20.303Z,1543951640.303 [Default:CheckIn:E] Running Loop=1 2018-12-04T19:27:20.710Z,1543951640.710 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1332.471354 min 2018-12-04T19:27:20.710Z,1543951640.710 [Default:CheckIn:E] Stopped 2018-12-04T19:27:20.710Z,1543951640.710 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T19:27:20.711Z,1543951640.711 [Default:CheckIn] Stopped 2018-12-04T19:27:20.711Z,1543951640.711 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T19:27:20.711Z,1543951640.711 [Default:CheckIn](INFO): Running loop #130 2018-12-04T19:27:20.711Z,1543951640.711 [Default:CheckIn] Running Loop=130 2018-12-04T19:27:20.711Z,1543951640.711 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T19:27:20.711Z,1543951640.711 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T19:27:21.475Z,1543951641.475 [NAL9602](INFO): Powering up 2018-12-04T19:27:32.676Z,1543951652.676 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:28:04.356Z,1543951684.356 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T19:28:04.438Z,1543951684.438 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T19:28:04.438Z,1543951684.438 [NAL9602] Data Fault, FailCount= 4 2018-12-04T19:28:04.438Z,1543951684.438 [NAL9602](ERROR): Data Fault 2018-12-04T19:28:04.497Z,1543951684.497 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T19:28:04.756Z,1543951684.756 [NAL9602](INFO): Powering down 2018-12-04T19:28:05.605Z,1543951685.605 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T19:28:05.605Z,1543951685.605 [NAL9602] No Fault, FailCount= 4 2018-12-04T19:28:35.140Z,1543951715.140 [NAL9602](INFO): Powering up NAL9602 2018-12-04T19:28:46.339Z,1543951726.339 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:28:47.139Z,1543951727.139 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T19:28:47.139Z,1543951727.139 [NAL9602] Data Fault, FailCount= 5 2018-12-04T19:28:47.139Z,1543951727.139 [NAL9602](ERROR): Data Fault 2018-12-04T19:28:47.173Z,1543951727.173 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T19:28:47.174Z,1543951727.174 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T19:28:50.313Z,1543951730.313 [NAL9602](INFO): Powering down 2018-12-04T19:28:50.376Z,1543951730.376 [CBIT](INFO): Critical error at 20181204T192847 2018-12-04T19:28:52.032Z,1543951732.032 [CBIT](IMPORTANT): Beginning ground fault scan 2018-12-04T19:29:00.813Z,1543951740.813 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:29:00.813Z,1543951740.813 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-04T19:29:00.813Z,1543951740.813 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:29:00.816Z,1543951740.816 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:29:00.816Z,1543951740.816 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-04T19:29:00.816Z,1543951740.816 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:29:00.829Z,1543951740.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:29:00.829Z,1543951740.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:29:01.233Z,1543951741.233 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:29:01.233Z,1543951741.233 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-04T19:29:01.234Z,1543951741.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:29:01.234Z,1543951741.234 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-04T19:29:01.613Z,1543951741.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:29:01.613Z,1543951741.613 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:29:01.613Z,1543951741.613 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:29:01.614Z,1543951741.614 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:29:01.614Z,1543951741.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:29:01.615Z,1543951741.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:29:02.830Z,1543951742.830 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.144236 CHAN A1 (24V): 0.000876 CHAN A2 (12V): -0.005517 CHAN A3 (5V): -0.002358 CHAN B0 (3.3V): -0.001267 CHAN B1 (3.15aV): -0.001744 CHAN B2 (3.15bV): -0.000891 CHAN B3 (GND): -0.000174 OPEN: -0.001362 Full Scale Calc: 4.765 mA, -1.589 mA 2018-12-04T19:30:47.284Z,1543951847.284 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T19:30:47.284Z,1543951847.284 [NAL9602] No Fault, FailCount= 5 2018-12-04T19:30:47.651Z,1543951847.651 [NAL9602](INFO): Powering up NAL9602 2018-12-04T19:30:58.851Z,1543951858.851 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:31:01.672Z,1543951861.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:31:01.672Z,1543951861.672 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-04T19:31:01.672Z,1543951861.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:31:01.674Z,1543951861.674 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:31:01.674Z,1543951861.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-04T19:31:01.674Z,1543951861.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:31:01.687Z,1543951861.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:31:01.687Z,1543951861.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:31:02.122Z,1543951862.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:31:02.123Z,1543951862.123 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-04T19:31:02.123Z,1543951862.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:31:02.123Z,1543951862.123 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-04T19:31:02.485Z,1543951862.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:31:02.485Z,1543951862.485 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:31:02.486Z,1543951862.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:31:02.486Z,1543951862.486 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:31:02.487Z,1543951862.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:31:02.487Z,1543951862.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:32:21.643Z,1543951941.643 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T19:27:20.7Z 2018-12-04T19:32:21.643Z,1543951941.643 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T19:32:21.644Z,1543951941.644 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T19:32:26.671Z,1543951946.671 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0387.lzma 2018-12-04T19:32:27.469Z,1543951947.469 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0387.lzma.bak 2018-12-04T19:32:27.469Z,1543951947.469 [DataOverHttps](INFO): SBD MOMSN=8965706 2018-12-04T19:32:36.760Z,1543951956.760 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T19:32:36.847Z,1543951956.847 [DataOverHttps](INFO): Sending 522 bytes from file Logs/20181203T211451/Express0388.lzma 2018-12-04T19:32:37.617Z,1543951957.617 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0388.lzma.bak 2018-12-04T19:32:37.617Z,1543951957.617 [DataOverHttps](INFO): SBD MOMSN=8965709 2018-12-04T19:32:38.931Z,1543951958.931 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T19:32:38.932Z,1543951958.932 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T19:32:38.932Z,1543951958.932 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T19:33:02.531Z,1543951982.531 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:33:02.531Z,1543951982.531 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-04T19:33:02.531Z,1543951982.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:33:02.533Z,1543951982.533 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:33:02.533Z,1543951982.533 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-04T19:33:02.533Z,1543951982.533 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:33:02.601Z,1543951982.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:33:02.602Z,1543951982.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:33:02.968Z,1543951982.968 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:33:02.969Z,1543951982.969 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-04T19:33:02.969Z,1543951982.969 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:33:02.969Z,1543951982.969 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-04T19:33:03.330Z,1543951983.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:33:03.330Z,1543951983.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:33:03.331Z,1543951983.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:33:03.331Z,1543951983.331 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:33:03.331Z,1543951983.331 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:33:03.332Z,1543951983.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:33:06.910Z,1543951986.910 [NAL9602](INFO): Powering down 2018-12-04T19:35:03.543Z,1543952103.543 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:35:03.543Z,1543952103.543 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-04T19:35:03.543Z,1543952103.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:35:03.545Z,1543952103.545 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:35:03.545Z,1543952103.545 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-04T19:35:03.545Z,1543952103.545 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:35:03.559Z,1543952103.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:35:03.559Z,1543952103.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:35:03.679Z,1543952103.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:35:03.679Z,1543952103.679 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-04T19:35:03.679Z,1543952103.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:35:03.680Z,1543952103.680 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-04T19:35:04.009Z,1543952104.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:35:04.010Z,1543952104.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:35:04.010Z,1543952104.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:35:04.010Z,1543952104.010 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:35:04.011Z,1543952104.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:35:04.011Z,1543952104.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:36:18.355Z,1543952178.355 [BPC1](ERROR): BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file). 2018-12-04T19:36:41.139Z,1543952201.139 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T19:36:41.139Z,1543952201.139 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T19:36:41.139Z,1543952201.139 [DropWeight](ERROR): Hardware Fault 2018-12-04T19:36:41.172Z,1543952201.172 [CBIT](INFO): Critical error at 20181204T193641 2018-12-04T19:36:41.175Z,1543952201.175 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T19:36:41.175Z,1543952201.175 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T19:36:41.574Z,1543952201.574 [CBIT](INFO): Critical error at 20181204T193641 2018-12-04T19:37:04.074Z,1543952224.074 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:37:04.074Z,1543952224.074 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-04T19:37:04.074Z,1543952224.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:37:04.076Z,1543952224.076 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:37:04.076Z,1543952224.076 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-04T19:37:04.077Z,1543952224.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:37:04.090Z,1543952224.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:37:04.091Z,1543952224.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:37:04.490Z,1543952224.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:37:04.490Z,1543952224.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-04T19:37:04.491Z,1543952224.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:37:04.491Z,1543952224.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-04T19:37:04.878Z,1543952224.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:37:04.878Z,1543952224.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:37:04.879Z,1543952224.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:37:04.879Z,1543952224.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:37:04.880Z,1543952224.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:37:04.880Z,1543952224.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:37:39.054Z,1543952259.054 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T19:37:39.054Z,1543952259.054 [Default:CheckIn:C.Wait] Stopped 2018-12-04T19:37:39.054Z,1543952259.054 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T19:37:39.054Z,1543952259.054 [Default:CheckIn:D] Running Loop=1 2018-12-04T19:37:39.438Z,1543952259.438 [Default:CheckIn:D] Stopped 2018-12-04T19:37:39.438Z,1543952259.438 [Default:CheckIn:E] Running Loop=1 2018-12-04T19:37:39.831Z,1543952259.831 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1342.790234 min 2018-12-04T19:37:39.831Z,1543952259.831 [Default:CheckIn:E] Stopped 2018-12-04T19:37:39.831Z,1543952259.831 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T19:37:39.831Z,1543952259.831 [Default:CheckIn] Stopped 2018-12-04T19:37:39.832Z,1543952259.832 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T19:37:39.832Z,1543952259.832 [Default:CheckIn](INFO): Running loop #131 2018-12-04T19:37:39.832Z,1543952259.832 [Default:CheckIn] Running Loop=131 2018-12-04T19:37:39.832Z,1543952259.832 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T19:37:39.832Z,1543952259.832 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T19:37:40.603Z,1543952260.603 [NAL9602](INFO): Powering up 2018-12-04T19:37:51.803Z,1543952271.803 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:39:04.998Z,1543952344.998 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:39:04.999Z,1543952344.999 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-04T19:39:04.999Z,1543952344.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:39:05.001Z,1543952345.001 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:39:05.001Z,1543952345.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-04T19:39:05.001Z,1543952345.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:39:05.015Z,1543952345.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:39:05.015Z,1543952345.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:39:05.407Z,1543952345.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:39:05.407Z,1543952345.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-04T19:39:05.407Z,1543952345.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:39:05.408Z,1543952345.408 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-04T19:39:05.793Z,1543952345.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:39:05.794Z,1543952345.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:39:05.795Z,1543952345.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:39:05.796Z,1543952345.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:39:05.796Z,1543952345.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:39:05.796Z,1543952345.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:40:46.851Z,1543952446.851 [BPC1](INFO): Calculating totals. Valid battery stick count: 55. Valid reserve battery stick count: 6. 2018-12-04T19:41:06.047Z,1543952466.047 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:41:06.047Z,1543952466.047 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-04T19:41:06.047Z,1543952466.047 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:41:06.049Z,1543952466.049 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:41:06.049Z,1543952466.049 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-04T19:41:06.049Z,1543952466.049 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:41:06.092Z,1543952466.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:41:06.093Z,1543952466.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:41:06.459Z,1543952466.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:41:06.459Z,1543952466.459 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-04T19:41:06.460Z,1543952466.460 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:41:06.460Z,1543952466.460 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-04T19:41:06.854Z,1543952466.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:41:06.854Z,1543952466.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:41:06.855Z,1543952466.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:41:06.855Z,1543952466.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:41:06.855Z,1543952466.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:41:06.856Z,1543952466.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:42:41.163Z,1543952561.163 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T19:37:39.8Z 2018-12-04T19:42:41.163Z,1543952561.163 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T19:42:41.163Z,1543952561.163 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T19:42:46.266Z,1543952566.266 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0390.lzma 2018-12-04T19:42:47.100Z,1543952567.100 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0390.lzma.bak 2018-12-04T19:42:47.100Z,1543952567.100 [DataOverHttps](INFO): SBD MOMSN=8965748 2018-12-04T19:42:56.485Z,1543952576.485 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T19:42:56.564Z,1543952576.564 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0391.lzma 2018-12-04T19:42:57.329Z,1543952577.329 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0391.lzma.bak 2018-12-04T19:42:57.329Z,1543952577.329 [DataOverHttps](INFO): SBD MOMSN=8965752 2018-12-04T19:42:58.652Z,1543952578.652 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T19:42:58.653Z,1543952578.653 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T19:42:58.653Z,1543952578.653 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T19:43:07.210Z,1543952587.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:43:07.210Z,1543952587.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-04T19:43:07.210Z,1543952587.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:43:07.212Z,1543952587.212 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:43:07.212Z,1543952587.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-04T19:43:07.212Z,1543952587.212 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:43:07.225Z,1543952587.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:43:07.226Z,1543952587.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:43:07.646Z,1543952587.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:43:07.646Z,1543952587.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-04T19:43:07.647Z,1543952587.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:43:07.647Z,1543952587.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-04T19:43:08.014Z,1543952588.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:43:08.014Z,1543952588.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:43:08.015Z,1543952588.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:43:08.015Z,1543952588.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:43:08.015Z,1543952588.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:43:08.016Z,1543952588.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:43:26.790Z,1543952606.790 [NAL9602](INFO): Powering down 2018-12-04T19:45:08.370Z,1543952708.370 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:45:08.370Z,1543952708.370 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-04T19:45:08.370Z,1543952708.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:45:08.372Z,1543952708.372 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:45:08.373Z,1543952708.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-04T19:45:08.373Z,1543952708.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:45:08.386Z,1543952708.386 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:45:08.386Z,1543952708.386 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:45:08.780Z,1543952708.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:45:08.780Z,1543952708.780 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-04T19:45:08.781Z,1543952708.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:45:08.781Z,1543952708.781 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-04T19:45:09.168Z,1543952709.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:45:09.168Z,1543952709.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:45:09.168Z,1543952709.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:45:09.169Z,1543952709.169 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:45:09.169Z,1543952709.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:45:09.170Z,1543952709.170 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:47:09.326Z,1543952829.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:47:09.326Z,1543952829.326 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-04T19:47:09.326Z,1543952829.326 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:47:09.328Z,1543952829.328 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:47:09.328Z,1543952829.328 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-04T19:47:09.329Z,1543952829.329 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:47:09.342Z,1543952829.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:47:09.374Z,1543952829.374 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:47:09.737Z,1543952829.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:47:09.737Z,1543952829.737 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-04T19:47:09.737Z,1543952829.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:47:09.737Z,1543952829.737 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-04T19:47:10.126Z,1543952830.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:47:10.127Z,1543952830.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:47:10.127Z,1543952830.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:47:10.127Z,1543952830.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:47:10.128Z,1543952830.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:47:10.128Z,1543952830.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:47:58.870Z,1543952878.870 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T19:47:58.870Z,1543952878.870 [Default:CheckIn:C.Wait] Stopped 2018-12-04T19:47:58.870Z,1543952878.870 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T19:47:58.871Z,1543952878.871 [Default:CheckIn:D] Running Loop=1 2018-12-04T19:47:59.266Z,1543952879.266 [Default:CheckIn:D] Stopped 2018-12-04T19:47:59.266Z,1543952879.266 [Default:CheckIn:E] Running Loop=1 2018-12-04T19:47:59.666Z,1543952879.666 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1353.120703 min 2018-12-04T19:47:59.667Z,1543952879.667 [Default:CheckIn:E] Stopped 2018-12-04T19:47:59.667Z,1543952879.667 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T19:47:59.667Z,1543952879.667 [Default:CheckIn] Stopped 2018-12-04T19:47:59.667Z,1543952879.667 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T19:47:59.667Z,1543952879.667 [Default:CheckIn](INFO): Running loop #132 2018-12-04T19:47:59.667Z,1543952879.667 [Default:CheckIn] Running Loop=132 2018-12-04T19:47:59.667Z,1543952879.667 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T19:47:59.668Z,1543952879.668 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T19:48:00.441Z,1543952880.441 [NAL9602](INFO): Powering up 2018-12-04T19:48:11.644Z,1543952891.644 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:48:12.444Z,1543952892.444 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T19:48:12.444Z,1543952892.444 [NAL9602] Data Fault, FailCount= 1 2018-12-04T19:48:12.444Z,1543952892.444 [NAL9602](ERROR): Data Fault 2018-12-04T19:48:12.504Z,1543952892.504 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T19:48:12.843Z,1543952892.843 [NAL9602](INFO): Powering down 2018-12-04T19:48:13.686Z,1543952893.686 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T19:48:13.686Z,1543952893.686 [NAL9602] No Fault, FailCount= 1 2018-12-04T19:48:43.195Z,1543952923.195 [NAL9602](INFO): Powering up NAL9602 2018-12-04T19:48:54.907Z,1543952934.907 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:49:10.136Z,1543952950.136 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:49:10.136Z,1543952950.136 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-04T19:49:10.136Z,1543952950.136 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:49:10.138Z,1543952950.138 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:49:10.138Z,1543952950.138 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-04T19:49:10.142Z,1543952950.142 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:49:10.204Z,1543952950.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:49:10.205Z,1543952950.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:49:10.544Z,1543952950.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:49:10.544Z,1543952950.544 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-04T19:49:10.544Z,1543952950.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:49:10.544Z,1543952950.544 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-04T19:49:10.926Z,1543952950.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:49:10.927Z,1543952950.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:49:10.927Z,1543952950.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:49:10.928Z,1543952950.928 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:49:10.928Z,1543952950.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:49:10.928Z,1543952950.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:51:11.030Z,1543953071.030 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:51:11.030Z,1543953071.030 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-04T19:51:11.030Z,1543953071.030 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:51:11.033Z,1543953071.033 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:51:11.033Z,1543953071.033 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-04T19:51:11.033Z,1543953071.033 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:51:11.046Z,1543953071.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:51:11.046Z,1543953071.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:51:11.451Z,1543953071.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:51:11.451Z,1543953071.451 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-04T19:51:11.451Z,1543953071.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:51:11.452Z,1543953071.452 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-04T19:51:11.826Z,1543953071.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:51:11.826Z,1543953071.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:51:11.827Z,1543953071.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:51:11.827Z,1543953071.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:51:11.828Z,1543953071.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:51:11.828Z,1543953071.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:51:41.450Z,1543953101.450 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T19:51:41.450Z,1543953101.450 [DropWeight] No Fault, FailCount= 1 2018-12-04T19:53:01.061Z,1543953181.061 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T19:47:59.7Z 2018-12-04T19:53:01.061Z,1543953181.061 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T19:53:01.061Z,1543953181.061 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T19:53:05.995Z,1543953185.995 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0393.lzma 2018-12-04T19:53:06.798Z,1543953186.798 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0393.lzma.bak 2018-12-04T19:53:06.798Z,1543953186.798 [DataOverHttps](INFO): SBD MOMSN=8965781 2018-12-04T19:53:12.187Z,1543953192.187 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:53:12.187Z,1543953192.187 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-04T19:53:12.187Z,1543953192.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:53:12.189Z,1543953192.189 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:53:12.189Z,1543953192.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-04T19:53:12.189Z,1543953192.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:53:12.202Z,1543953192.202 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:53:12.203Z,1543953192.203 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:53:12.603Z,1543953192.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:53:12.603Z,1543953192.603 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-04T19:53:12.603Z,1543953192.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:53:12.603Z,1543953192.603 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-04T19:53:13.005Z,1543953193.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:53:13.006Z,1543953193.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:53:13.006Z,1543953193.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:53:13.006Z,1543953193.006 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:53:13.007Z,1543953193.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:53:13.007Z,1543953193.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:53:16.316Z,1543953196.316 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0394.lzma 2018-12-04T19:53:17.101Z,1543953197.101 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0394.lzma.bak 2018-12-04T19:53:17.101Z,1543953197.101 [DataOverHttps](INFO): SBD MOMSN=8965783 2018-12-04T19:53:18.545Z,1543953198.545 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T19:53:18.545Z,1543953198.545 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T19:53:18.545Z,1543953198.545 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T19:53:57.364Z,1543953237.364 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T19:54:28.111Z,1543953268.111 [NAL9602](INFO): Powering down 2018-12-04T19:55:13.260Z,1543953313.260 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:55:13.260Z,1543953313.260 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-04T19:55:13.261Z,1543953313.261 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:55:13.263Z,1543953313.263 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:55:13.263Z,1543953313.263 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-04T19:55:13.263Z,1543953313.263 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:55:13.276Z,1543953313.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:55:13.276Z,1543953313.276 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:55:13.671Z,1543953313.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:55:13.671Z,1543953313.671 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-04T19:55:13.672Z,1543953313.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:55:13.672Z,1543953313.672 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-04T19:55:14.069Z,1543953314.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:55:14.069Z,1543953314.069 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:55:14.070Z,1543953314.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:55:14.070Z,1543953314.070 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:55:14.071Z,1543953314.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:55:14.071Z,1543953314.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:57:14.202Z,1543953434.202 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:57:14.202Z,1543953434.202 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-04T19:57:14.202Z,1543953434.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:57:14.204Z,1543953434.204 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:57:14.204Z,1543953434.204 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-04T19:57:14.205Z,1543953434.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:57:14.218Z,1543953434.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:57:14.218Z,1543953434.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:57:14.609Z,1543953434.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:57:14.609Z,1543953434.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-04T19:57:14.610Z,1543953434.610 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:57:14.610Z,1543953434.610 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-04T19:57:14.994Z,1543953434.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:57:15.009Z,1543953435.009 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:57:15.009Z,1543953435.009 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:57:15.010Z,1543953435.010 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:57:15.010Z,1543953435.010 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:57:15.011Z,1543953435.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:58:18.875Z,1543953498.875 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T19:58:18.875Z,1543953498.875 [Default:CheckIn:C.Wait] Stopped 2018-12-04T19:58:18.875Z,1543953498.875 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T19:58:18.875Z,1543953498.875 [Default:CheckIn:D] Running Loop=1 2018-12-04T19:58:19.282Z,1543953499.282 [Default:CheckIn:D] Stopped 2018-12-04T19:58:19.282Z,1543953499.282 [Default:CheckIn:E] Running Loop=1 2018-12-04T19:58:19.683Z,1543953499.683 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1363.454297 min 2018-12-04T19:58:19.683Z,1543953499.683 [Default:CheckIn:E] Stopped 2018-12-04T19:58:19.683Z,1543953499.683 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T19:58:19.684Z,1543953499.684 [Default:CheckIn] Stopped 2018-12-04T19:58:19.684Z,1543953499.684 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T19:58:19.684Z,1543953499.684 [Default:CheckIn](INFO): Running loop #133 2018-12-04T19:58:19.684Z,1543953499.684 [Default:CheckIn] Running Loop=133 2018-12-04T19:58:19.684Z,1543953499.684 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T19:58:19.684Z,1543953499.684 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T19:58:20.449Z,1543953500.449 [NAL9602](INFO): Powering up 2018-12-04T19:58:31.255Z,1543953511.255 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:59:03.207Z,1543953543.207 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T19:59:03.290Z,1543953543.290 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T19:59:03.290Z,1543953543.290 [NAL9602] Data Fault, FailCount= 2 2018-12-04T19:59:03.290Z,1543953543.290 [NAL9602](ERROR): Data Fault 2018-12-04T19:59:03.361Z,1543953543.361 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T19:59:03.600Z,1543953543.600 [NAL9602](INFO): Powering down 2018-12-04T19:59:04.445Z,1543953544.445 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T19:59:04.445Z,1543953544.445 [NAL9602] No Fault, FailCount= 2 2018-12-04T19:59:15.198Z,1543953555.198 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:59:15.198Z,1543953555.198 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-04T19:59:15.198Z,1543953555.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T19:59:15.200Z,1543953555.200 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T19:59:15.201Z,1543953555.201 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-04T19:59:15.201Z,1543953555.201 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T19:59:15.239Z,1543953555.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T19:59:15.240Z,1543953555.240 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T19:59:15.618Z,1543953555.618 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T19:59:15.618Z,1543953555.618 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-04T19:59:15.619Z,1543953555.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T19:59:15.619Z,1543953555.619 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-04T19:59:15.993Z,1543953555.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T19:59:15.994Z,1543953555.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:59:15.994Z,1543953555.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:59:15.995Z,1543953555.995 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T19:59:15.995Z,1543953555.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T19:59:15.995Z,1543953555.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T19:59:33.969Z,1543953573.969 [NAL9602](INFO): Powering up NAL9602 2018-12-04T19:59:45.172Z,1543953585.172 [NAL9602](INFO): NAL9602 initialized 2018-12-04T19:59:45.980Z,1543953585.980 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T19:59:45.980Z,1543953585.980 [NAL9602] Data Fault, FailCount= 3 2018-12-04T19:59:45.980Z,1543953585.980 [NAL9602](ERROR): Data Fault 2018-12-04T19:59:46.043Z,1543953586.043 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T19:59:49.179Z,1543953589.179 [NAL9602](INFO): Powering down 2018-12-04T19:59:49.700Z,1543953589.700 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T19:59:49.700Z,1543953589.700 [NAL9602] No Fault, FailCount= 3 2018-12-04T20:00:06.970Z,1543953606.970 [Reporter](INFO): platform_buoyancy_position 960.352074 cc 2018-12-04T20:00:19.256Z,1543953619.256 [NAL9602](INFO): Powering up NAL9602 2018-12-04T20:00:30.404Z,1543953630.404 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:01:16.061Z,1543953676.061 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:01:16.061Z,1543953676.061 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-04T20:01:16.061Z,1543953676.061 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:01:16.063Z,1543953676.063 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:01:16.064Z,1543953676.064 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-04T20:01:16.064Z,1543953676.064 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:01:16.077Z,1543953676.077 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:01:16.077Z,1543953676.077 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:01:16.470Z,1543953676.470 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:01:16.470Z,1543953676.470 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-04T20:01:16.471Z,1543953676.471 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:01:16.471Z,1543953676.471 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-04T20:01:16.858Z,1543953676.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:01:16.858Z,1543953676.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:01:16.859Z,1543953676.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:01:16.859Z,1543953676.859 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:01:16.860Z,1543953676.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:01:16.860Z,1543953676.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:03:16.926Z,1543953796.926 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:03:16.926Z,1543953796.926 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-04T20:03:16.927Z,1543953796.927 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:03:16.929Z,1543953796.929 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:03:16.929Z,1543953796.929 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-04T20:03:16.929Z,1543953796.929 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:03:16.942Z,1543953796.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:03:16.942Z,1543953796.942 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:03:17.336Z,1543953797.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:03:17.336Z,1543953797.336 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-04T20:03:17.337Z,1543953797.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:03:17.337Z,1543953797.337 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-04T20:03:20.426Z,1543953800.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:03:20.427Z,1543953800.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:03:20.427Z,1543953800.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:03:20.427Z,1543953800.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:03:20.428Z,1543953800.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:03:20.428Z,1543953800.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:03:20.431Z,1543953800.431 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T19:58:19.7Z 2018-12-04T20:03:20.431Z,1543953800.431 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T20:03:20.431Z,1543953800.431 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T20:03:25.341Z,1543953805.341 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0396.lzma 2018-12-04T20:03:26.121Z,1543953806.121 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0396.lzma.bak 2018-12-04T20:03:26.121Z,1543953806.121 [DataOverHttps](INFO): SBD MOMSN=8965811 2018-12-04T20:03:35.512Z,1543953815.512 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T20:03:35.569Z,1543953815.569 [DataOverHttps](INFO): Sending 357 bytes from file Logs/20181203T211451/Express0397.lzma 2018-12-04T20:03:36.369Z,1543953816.369 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0397.lzma.bak 2018-12-04T20:03:36.369Z,1543953816.369 [DataOverHttps](INFO): SBD MOMSN=8965813 2018-12-04T20:03:37.704Z,1543953817.704 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T20:03:37.704Z,1543953817.704 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T20:03:37.704Z,1543953817.704 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T20:04:05.721Z,1543953845.721 [NAL9602](INFO): Powering down 2018-12-04T20:05:20.671Z,1543953920.671 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:05:20.671Z,1543953920.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-04T20:05:20.671Z,1543953920.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:05:20.673Z,1543953920.673 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:05:20.673Z,1543953920.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-04T20:05:20.673Z,1543953920.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:05:20.697Z,1543953920.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:05:20.698Z,1543953920.698 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:05:21.107Z,1543953921.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:05:21.107Z,1543953921.107 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-04T20:05:21.107Z,1543953921.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:05:21.107Z,1543953921.107 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-04T20:05:21.466Z,1543953921.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:05:21.466Z,1543953921.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:05:21.467Z,1543953921.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:05:21.467Z,1543953921.467 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:05:21.467Z,1543953921.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:05:21.468Z,1543953921.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:07:21.779Z,1543954041.779 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:07:21.780Z,1543954041.780 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-04T20:07:21.780Z,1543954041.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:07:21.782Z,1543954041.782 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:07:21.782Z,1543954041.782 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-04T20:07:21.782Z,1543954041.782 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:07:21.795Z,1543954041.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:07:21.795Z,1543954041.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:07:22.192Z,1543954042.192 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:07:22.193Z,1543954042.193 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-04T20:07:22.193Z,1543954042.193 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:07:22.193Z,1543954042.193 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-04T20:07:22.580Z,1543954042.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:07:22.580Z,1543954042.580 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:07:22.580Z,1543954042.580 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:07:22.581Z,1543954042.581 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:07:22.581Z,1543954042.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:07:22.582Z,1543954042.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:08:38.009Z,1543954118.009 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T20:08:38.010Z,1543954118.010 [Default:CheckIn:C.Wait] Stopped 2018-12-04T20:08:38.010Z,1543954118.010 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T20:08:38.010Z,1543954118.010 [Default:CheckIn:D] Running Loop=1 2018-12-04T20:08:38.403Z,1543954118.403 [Default:CheckIn:D] Stopped 2018-12-04T20:08:38.403Z,1543954118.403 [Default:CheckIn:E] Running Loop=1 2018-12-04T20:08:38.804Z,1543954118.804 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1373.773047 min 2018-12-04T20:08:38.805Z,1543954118.805 [Default:CheckIn:E] Stopped 2018-12-04T20:08:38.805Z,1543954118.805 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T20:08:38.805Z,1543954118.805 [Default:CheckIn] Stopped 2018-12-04T20:08:38.805Z,1543954118.805 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T20:08:38.805Z,1543954118.805 [Default:CheckIn](INFO): Running loop #134 2018-12-04T20:08:38.805Z,1543954118.805 [Default:CheckIn] Running Loop=134 2018-12-04T20:08:38.805Z,1543954118.805 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T20:08:38.806Z,1543954118.806 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T20:08:39.575Z,1543954119.575 [NAL9602](INFO): Powering up 2018-12-04T20:08:50.376Z,1543954130.376 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:09:22.809Z,1543954162.809 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:09:22.809Z,1543954162.809 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-04T20:09:22.809Z,1543954162.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:09:22.811Z,1543954162.811 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:09:22.811Z,1543954162.811 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-04T20:09:22.811Z,1543954162.811 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:09:22.849Z,1543954162.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:09:22.850Z,1543954162.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:09:23.240Z,1543954163.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:09:23.240Z,1543954163.240 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-04T20:09:23.240Z,1543954163.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:09:23.240Z,1543954163.240 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-04T20:09:23.614Z,1543954163.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:09:23.614Z,1543954163.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:09:23.615Z,1543954163.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:09:23.615Z,1543954163.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:09:23.616Z,1543954163.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:09:23.616Z,1543954163.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:11:23.714Z,1543954283.714 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:11:23.714Z,1543954283.714 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-04T20:11:23.715Z,1543954283.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:11:23.717Z,1543954283.717 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:11:23.717Z,1543954283.717 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-04T20:11:23.717Z,1543954283.717 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:11:23.731Z,1543954283.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:11:23.731Z,1543954283.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:11:24.129Z,1543954284.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:11:24.130Z,1543954284.130 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-04T20:11:24.130Z,1543954284.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:11:24.130Z,1543954284.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-04T20:11:24.514Z,1543954284.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:11:24.515Z,1543954284.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:11:24.515Z,1543954284.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:11:24.515Z,1543954284.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:11:24.516Z,1543954284.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:11:24.516Z,1543954284.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:13:24.625Z,1543954404.625 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:13:24.625Z,1543954404.625 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-04T20:13:24.625Z,1543954404.625 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:13:24.628Z,1543954404.628 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:13:24.628Z,1543954404.628 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-04T20:13:24.628Z,1543954404.628 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:13:24.641Z,1543954404.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:13:24.641Z,1543954404.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:13:25.059Z,1543954405.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:13:25.059Z,1543954405.059 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-04T20:13:25.060Z,1543954405.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:13:25.060Z,1543954405.060 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-04T20:13:25.435Z,1543954405.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:13:25.435Z,1543954405.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:13:25.436Z,1543954405.436 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:13:25.436Z,1543954405.436 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:13:25.437Z,1543954405.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:13:25.437Z,1543954405.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:13:39.742Z,1543954419.742 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T20:08:38.8Z 2018-12-04T20:13:39.742Z,1543954419.742 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T20:13:39.742Z,1543954419.742 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T20:13:44.799Z,1543954424.799 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0399.lzma 2018-12-04T20:13:45.581Z,1543954425.581 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0399.lzma.bak 2018-12-04T20:13:45.581Z,1543954425.581 [DataOverHttps](INFO): SBD MOMSN=8965847 2018-12-04T20:13:54.815Z,1543954434.815 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T20:13:54.861Z,1543954434.861 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0400.lzma 2018-12-04T20:13:55.661Z,1543954435.661 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0400.lzma.bak 2018-12-04T20:13:55.661Z,1543954435.661 [DataOverHttps](INFO): SBD MOMSN=8965849 2018-12-04T20:13:57.149Z,1543954437.149 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T20:13:57.149Z,1543954437.149 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T20:13:57.149Z,1543954437.149 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T20:14:25.204Z,1543954465.204 [NAL9602](INFO): Powering down 2018-12-04T20:15:25.614Z,1543954525.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:15:25.614Z,1543954525.614 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-04T20:15:25.614Z,1543954525.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:15:25.616Z,1543954525.616 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:15:25.616Z,1543954525.616 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-04T20:15:25.617Z,1543954525.617 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:15:25.630Z,1543954525.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:15:25.630Z,1543954525.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:15:26.022Z,1543954526.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:15:26.022Z,1543954526.022 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-04T20:15:26.022Z,1543954526.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:15:26.023Z,1543954526.023 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-04T20:15:26.407Z,1543954526.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:15:26.408Z,1543954526.408 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:15:26.408Z,1543954526.408 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:15:26.408Z,1543954526.408 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:15:26.409Z,1543954526.409 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:15:26.409Z,1543954526.409 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:17:26.511Z,1543954646.511 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:17:26.512Z,1543954646.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-04T20:17:26.512Z,1543954646.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:17:26.514Z,1543954646.514 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:17:26.514Z,1543954646.514 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-04T20:17:26.514Z,1543954646.514 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:17:26.527Z,1543954646.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:17:26.527Z,1543954646.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:17:26.930Z,1543954646.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:17:26.930Z,1543954646.930 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-04T20:17:26.930Z,1543954646.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:17:26.930Z,1543954646.931 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-04T20:17:27.312Z,1543954647.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:17:27.312Z,1543954647.312 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:17:27.313Z,1543954647.313 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:17:27.313Z,1543954647.313 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:17:27.314Z,1543954647.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:17:27.314Z,1543954647.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:18:57.251Z,1543954737.251 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T20:18:57.251Z,1543954737.251 [Default:CheckIn:C.Wait] Stopped 2018-12-04T20:18:57.251Z,1543954737.251 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T20:18:57.251Z,1543954737.251 [Default:CheckIn:D] Running Loop=1 2018-12-04T20:18:57.643Z,1543954737.643 [Default:CheckIn:D] Stopped 2018-12-04T20:18:57.643Z,1543954737.643 [Default:CheckIn:E] Running Loop=1 2018-12-04T20:18:58.051Z,1543954738.051 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1384.093750 min 2018-12-04T20:18:58.051Z,1543954738.051 [Default:CheckIn:E] Stopped 2018-12-04T20:18:58.051Z,1543954738.051 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T20:18:58.051Z,1543954738.051 [Default:CheckIn] Stopped 2018-12-04T20:18:58.051Z,1543954738.051 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T20:18:58.052Z,1543954738.052 [Default:CheckIn](INFO): Running loop #135 2018-12-04T20:18:58.052Z,1543954738.052 [Default:CheckIn] Running Loop=135 2018-12-04T20:18:58.052Z,1543954738.052 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T20:18:58.052Z,1543954738.052 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T20:18:58.815Z,1543954738.815 [NAL9602](INFO): Powering up 2018-12-04T20:19:10.016Z,1543954750.016 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:19:10.814Z,1543954750.814 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T20:19:10.814Z,1543954750.814 [NAL9602] Data Fault, FailCount= 4 2018-12-04T20:19:10.814Z,1543954750.814 [NAL9602](ERROR): Data Fault 2018-12-04T20:19:10.873Z,1543954750.873 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T20:19:11.216Z,1543954751.216 [NAL9602](INFO): Powering down 2018-12-04T20:19:12.065Z,1543954752.065 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T20:19:12.065Z,1543954752.065 [NAL9602] No Fault, FailCount= 4 2018-12-04T20:19:27.700Z,1543954767.700 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:19:27.700Z,1543954767.700 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-04T20:19:27.700Z,1543954767.700 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:19:27.702Z,1543954767.702 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:19:27.703Z,1543954767.703 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-04T20:19:27.703Z,1543954767.703 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:19:27.728Z,1543954767.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:19:27.728Z,1543954767.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:19:28.138Z,1543954768.138 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:19:28.139Z,1543954768.139 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-04T20:19:28.139Z,1543954768.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:19:28.139Z,1543954768.139 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-04T20:19:28.514Z,1543954768.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:19:28.514Z,1543954768.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:19:28.515Z,1543954768.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:19:28.515Z,1543954768.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:19:28.516Z,1543954768.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:19:28.516Z,1543954768.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:19:41.288Z,1543954781.288 [NAL9602](INFO): Powering up NAL9602 2018-12-04T20:19:53.411Z,1543954793.411 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:21:28.703Z,1543954888.703 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:21:28.704Z,1543954888.704 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-04T20:21:28.704Z,1543954888.704 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:21:28.706Z,1543954888.706 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:21:28.706Z,1543954888.706 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-04T20:21:28.706Z,1543954888.706 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:21:28.720Z,1543954888.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:21:28.720Z,1543954888.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:21:29.122Z,1543954889.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:21:29.122Z,1543954889.122 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-04T20:21:29.122Z,1543954889.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:21:29.122Z,1543954889.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-04T20:21:29.510Z,1543954889.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:21:29.510Z,1543954889.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:21:29.511Z,1543954889.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:21:29.511Z,1543954889.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:21:29.511Z,1543954889.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:21:29.512Z,1543954889.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:21:42.655Z,1543954902.655 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T20:21:42.655Z,1543954902.655 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T20:21:42.655Z,1543954902.655 [DropWeight](ERROR): Hardware Fault 2018-12-04T20:21:42.711Z,1543954902.711 [CBIT](INFO): Critical error at 20181204T202142 2018-12-04T20:21:42.714Z,1543954902.714 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T20:21:42.722Z,1543954902.722 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T20:21:43.093Z,1543954903.093 [CBIT](INFO): Critical error at 20181204T202142 2018-12-04T20:23:29.679Z,1543955009.679 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:23:29.679Z,1543955009.679 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-04T20:23:29.679Z,1543955009.679 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:23:29.681Z,1543955009.681 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:23:29.681Z,1543955009.681 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-04T20:23:29.681Z,1543955009.681 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:23:29.695Z,1543955009.695 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:23:29.695Z,1543955009.695 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:23:30.094Z,1543955010.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:23:30.094Z,1543955010.094 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-04T20:23:30.095Z,1543955010.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:23:30.095Z,1543955010.095 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-04T20:23:30.482Z,1543955010.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:23:30.483Z,1543955010.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:23:30.484Z,1543955010.484 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:23:30.484Z,1543955010.484 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:23:30.484Z,1543955010.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:23:30.485Z,1543955010.485 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:23:59.595Z,1543955039.595 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T20:18:58.1Z 2018-12-04T20:23:59.595Z,1543955039.595 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T20:23:59.595Z,1543955039.595 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T20:24:04.525Z,1543955044.525 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0402.lzma 2018-12-04T20:24:05.317Z,1543955045.317 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0402.lzma.bak 2018-12-04T20:24:05.318Z,1543955045.318 [DataOverHttps](INFO): SBD MOMSN=8965879 2018-12-04T20:24:14.717Z,1543955054.717 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0403.lzma 2018-12-04T20:24:15.489Z,1543955055.489 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0403.lzma.bak 2018-12-04T20:24:15.489Z,1543955055.489 [DataOverHttps](INFO): SBD MOMSN=8965883 2018-12-04T20:24:16.846Z,1543955056.846 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T20:24:16.847Z,1543955056.847 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T20:24:16.847Z,1543955056.847 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T20:24:56.955Z,1543955096.955 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T20:25:27.757Z,1543955127.757 [NAL9602](INFO): Powering down 2018-12-04T20:25:31.053Z,1543955131.053 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:25:31.053Z,1543955131.053 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-04T20:25:31.053Z,1543955131.053 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:25:31.055Z,1543955131.055 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:25:31.056Z,1543955131.056 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-04T20:25:31.056Z,1543955131.056 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:25:31.069Z,1543955131.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:25:31.069Z,1543955131.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:25:31.210Z,1543955131.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:25:31.210Z,1543955131.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-04T20:25:31.211Z,1543955131.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:25:31.211Z,1543955131.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-04T20:25:31.514Z,1543955131.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:25:31.514Z,1543955131.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:25:31.515Z,1543955131.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:25:31.515Z,1543955131.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:25:31.516Z,1543955131.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:25:31.516Z,1543955131.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:27:31.875Z,1543955251.875 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:27:31.875Z,1543955251.875 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-04T20:27:31.875Z,1543955251.875 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:27:31.877Z,1543955251.877 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:27:31.877Z,1543955251.877 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-04T20:27:31.877Z,1543955251.877 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:27:31.908Z,1543955251.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:27:31.909Z,1543955251.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:27:32.296Z,1543955252.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:27:32.296Z,1543955252.296 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-04T20:27:32.296Z,1543955252.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:27:32.297Z,1543955252.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-04T20:27:32.664Z,1543955252.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:27:32.664Z,1543955252.664 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:27:32.664Z,1543955252.664 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:27:32.665Z,1543955252.665 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:27:32.665Z,1543955252.665 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:27:32.666Z,1543955252.666 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:29:16.949Z,1543955356.949 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T20:29:16.949Z,1543955356.949 [Default:CheckIn:C.Wait] Stopped 2018-12-04T20:29:16.949Z,1543955356.949 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T20:29:16.949Z,1543955356.949 [Default:CheckIn:D] Running Loop=1 2018-12-04T20:29:17.354Z,1543955357.354 [Default:CheckIn:D] Stopped 2018-12-04T20:29:17.354Z,1543955357.354 [Default:CheckIn:E] Running Loop=1 2018-12-04T20:29:17.751Z,1543955357.751 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1394.422135 min 2018-12-04T20:29:17.751Z,1543955357.751 [Default:CheckIn:E] Stopped 2018-12-04T20:29:17.751Z,1543955357.751 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T20:29:17.751Z,1543955357.751 [Default:CheckIn] Stopped 2018-12-04T20:29:17.751Z,1543955357.751 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T20:29:17.751Z,1543955357.751 [Default:CheckIn](INFO): Running loop #136 2018-12-04T20:29:17.751Z,1543955357.751 [Default:CheckIn] Running Loop=136 2018-12-04T20:29:17.752Z,1543955357.752 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T20:29:17.752Z,1543955357.752 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T20:29:18.519Z,1543955358.519 [NAL9602](INFO): Powering up 2018-12-04T20:29:29.319Z,1543955369.319 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:29:33.010Z,1543955373.010 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:29:33.010Z,1543955373.010 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-04T20:29:33.010Z,1543955373.010 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:29:33.027Z,1543955373.027 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:29:33.027Z,1543955373.027 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-04T20:29:33.027Z,1543955373.027 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:29:33.040Z,1543955373.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:29:33.040Z,1543955373.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:29:33.390Z,1543955373.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:29:33.390Z,1543955373.390 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-04T20:29:33.391Z,1543955373.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:29:33.391Z,1543955373.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-04T20:29:33.754Z,1543955373.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:29:33.755Z,1543955373.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:29:33.755Z,1543955373.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:29:33.755Z,1543955373.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:29:33.756Z,1543955373.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:29:33.756Z,1543955373.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:31:33.824Z,1543955493.824 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:31:33.824Z,1543955493.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-04T20:31:33.824Z,1543955493.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:31:33.826Z,1543955493.826 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:31:33.826Z,1543955493.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-04T20:31:33.827Z,1543955493.827 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:31:33.840Z,1543955493.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:31:33.840Z,1543955493.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:31:34.251Z,1543955494.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:31:34.251Z,1543955494.251 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-04T20:31:34.252Z,1543955494.252 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:31:34.252Z,1543955494.252 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-04T20:31:34.630Z,1543955494.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:31:34.631Z,1543955494.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:31:34.631Z,1543955494.631 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:31:34.632Z,1543955494.632 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:31:34.632Z,1543955494.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:31:34.632Z,1543955494.632 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:33:34.683Z,1543955614.683 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:33:34.684Z,1543955614.684 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-04T20:33:34.684Z,1543955614.684 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:33:34.686Z,1543955614.686 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:33:34.686Z,1543955614.686 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-04T20:33:34.686Z,1543955614.686 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:33:34.700Z,1543955614.700 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:33:34.700Z,1543955614.700 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:33:35.091Z,1543955615.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:33:35.091Z,1543955615.091 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-04T20:33:35.092Z,1543955615.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:33:35.092Z,1543955615.092 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-04T20:33:35.470Z,1543955615.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:33:35.471Z,1543955615.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:33:35.471Z,1543955615.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:33:35.471Z,1543955615.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:33:35.472Z,1543955615.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:33:35.472Z,1543955615.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:34:19.342Z,1543955659.342 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T20:29:17.8Z 2018-12-04T20:34:19.342Z,1543955659.342 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T20:34:19.342Z,1543955659.342 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T20:34:24.421Z,1543955664.421 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0405.lzma 2018-12-04T20:34:25.213Z,1543955665.213 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0405.lzma.bak 2018-12-04T20:34:25.214Z,1543955665.214 [DataOverHttps](INFO): SBD MOMSN=8965913 2018-12-04T20:34:34.446Z,1543955674.446 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T20:34:34.492Z,1543955674.492 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0406.lzma 2018-12-04T20:34:35.293Z,1543955675.293 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0406.lzma.bak 2018-12-04T20:34:35.293Z,1543955675.293 [DataOverHttps](INFO): SBD MOMSN=8965915 2018-12-04T20:34:36.810Z,1543955676.810 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T20:34:36.810Z,1543955676.810 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T20:34:36.810Z,1543955676.810 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T20:35:04.841Z,1543955704.841 [NAL9602](INFO): Powering down 2018-12-04T20:35:35.672Z,1543955735.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:35:35.672Z,1543955735.672 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-04T20:35:35.672Z,1543955735.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:35:35.674Z,1543955735.674 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:35:35.674Z,1543955735.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-04T20:35:35.674Z,1543955735.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:35:35.709Z,1543955735.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:35:35.709Z,1543955735.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:35:36.107Z,1543955736.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:35:36.107Z,1543955736.107 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-04T20:35:36.108Z,1543955736.108 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:35:36.108Z,1543955736.108 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-04T20:35:36.471Z,1543955736.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:35:36.472Z,1543955736.472 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:35:36.472Z,1543955736.472 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:35:36.472Z,1543955736.472 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:35:36.473Z,1543955736.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:35:36.473Z,1543955736.473 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:36:42.796Z,1543955802.796 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T20:36:42.797Z,1543955802.797 [DropWeight] No Fault, FailCount= 1 2018-12-04T20:37:36.543Z,1543955856.543 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:37:36.543Z,1543955856.543 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-04T20:37:36.543Z,1543955856.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:37:36.545Z,1543955856.545 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:37:36.545Z,1543955856.545 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-04T20:37:36.545Z,1543955856.545 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:37:36.579Z,1543955856.579 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:37:36.580Z,1543955856.580 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:37:36.933Z,1543955856.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:37:36.933Z,1543955856.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-04T20:37:36.934Z,1543955856.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:37:36.934Z,1543955856.934 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-04T20:37:37.317Z,1543955857.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:37:37.317Z,1543955857.317 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:37:37.318Z,1543955857.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:37:37.318Z,1543955857.318 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:37:37.318Z,1543955857.318 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:37:37.319Z,1543955857.319 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:39:37.285Z,1543955977.285 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T20:39:37.285Z,1543955977.285 [Default:CheckIn:C.Wait] Stopped 2018-12-04T20:39:37.285Z,1543955977.285 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T20:39:37.285Z,1543955977.285 [Default:CheckIn:D] Running Loop=1 2018-12-04T20:39:37.681Z,1543955977.681 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:39:37.681Z,1543955977.681 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-04T20:39:37.681Z,1543955977.681 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:39:37.683Z,1543955977.683 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:39:37.683Z,1543955977.683 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-04T20:39:37.683Z,1543955977.683 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:39:37.686Z,1543955977.686 [Default:CheckIn:D] Stopped 2018-12-04T20:39:37.686Z,1543955977.686 [Default:CheckIn:E] Running Loop=1 2018-12-04T20:39:37.696Z,1543955977.696 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:39:37.697Z,1543955977.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:39:38.081Z,1543955978.081 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1404.761068 min 2018-12-04T20:39:38.081Z,1543955978.081 [Default:CheckIn:E] Stopped 2018-12-04T20:39:38.081Z,1543955978.081 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T20:39:38.081Z,1543955978.081 [Default:CheckIn] Stopped 2018-12-04T20:39:38.081Z,1543955978.081 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T20:39:38.081Z,1543955978.081 [Default:CheckIn](INFO): Running loop #137 2018-12-04T20:39:38.081Z,1543955978.081 [Default:CheckIn] Running Loop=137 2018-12-04T20:39:38.082Z,1543955978.082 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T20:39:38.082Z,1543955978.082 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T20:39:38.092Z,1543955978.092 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:39:38.092Z,1543955978.092 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-04T20:39:38.093Z,1543955978.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:39:38.093Z,1543955978.093 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-04T20:39:38.490Z,1543955978.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:39:38.490Z,1543955978.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:39:38.491Z,1543955978.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:39:38.491Z,1543955978.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:39:38.492Z,1543955978.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:39:38.492Z,1543955978.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:39:38.855Z,1543955978.855 [NAL9602](INFO): Powering up 2018-12-04T20:39:50.057Z,1543955990.057 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:39:50.856Z,1543955990.856 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T20:39:50.856Z,1543955990.856 [NAL9602] Data Fault, FailCount= 5 2018-12-04T20:39:50.856Z,1543955990.856 [NAL9602](ERROR): Data Fault 2018-12-04T20:39:50.918Z,1543955990.918 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T20:39:50.919Z,1543955990.919 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T20:39:51.256Z,1543955991.256 [NAL9602](INFO): Powering down 2018-12-04T20:39:51.309Z,1543955991.309 [CBIT](INFO): Critical error at 20181204T203950 2018-12-04T20:41:38.639Z,1543956098.639 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:41:38.639Z,1543956098.639 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-04T20:41:38.639Z,1543956098.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:41:38.641Z,1543956098.641 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:41:38.641Z,1543956098.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-04T20:41:38.641Z,1543956098.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:41:38.655Z,1543956098.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:41:38.655Z,1543956098.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:41:39.043Z,1543956099.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:41:39.043Z,1543956099.043 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-04T20:41:39.044Z,1543956099.044 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:41:39.044Z,1543956099.044 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-04T20:41:39.434Z,1543956099.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:41:39.434Z,1543956099.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:41:39.435Z,1543956099.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:41:39.435Z,1543956099.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:41:39.436Z,1543956099.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:41:39.436Z,1543956099.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:41:51.061Z,1543956111.061 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T20:41:51.061Z,1543956111.061 [NAL9602] No Fault, FailCount= 5 2018-12-04T20:41:51.420Z,1543956111.420 [NAL9602](INFO): Powering up NAL9602 2018-12-04T20:42:02.620Z,1543956122.620 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:43:39.682Z,1543956219.682 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:43:39.682Z,1543956219.682 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-04T20:43:39.682Z,1543956219.682 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:43:39.685Z,1543956219.685 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:43:39.685Z,1543956219.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-04T20:43:39.685Z,1543956219.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:43:39.698Z,1543956219.698 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:43:39.699Z,1543956219.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:43:40.095Z,1543956220.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:43:40.095Z,1543956220.095 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-04T20:43:40.095Z,1543956220.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:43:40.096Z,1543956220.096 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-04T20:43:40.474Z,1543956220.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:43:40.475Z,1543956220.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:43:40.475Z,1543956220.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:43:40.476Z,1543956220.476 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:43:40.476Z,1543956220.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:43:40.476Z,1543956220.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:44:38.883Z,1543956278.883 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T20:39:38.1Z 2018-12-04T20:44:38.883Z,1543956278.883 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T20:44:38.883Z,1543956278.883 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T20:44:43.945Z,1543956283.945 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0408.lzma 2018-12-04T20:44:44.729Z,1543956284.729 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0408.lzma.bak 2018-12-04T20:44:44.729Z,1543956284.729 [DataOverHttps](INFO): SBD MOMSN=8965943 2018-12-04T20:44:54.852Z,1543956294.852 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0409.lzma 2018-12-04T20:44:55.649Z,1543956295.649 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0409.lzma.bak 2018-12-04T20:44:55.649Z,1543956295.649 [DataOverHttps](INFO): SBD MOMSN=8965946 2018-12-04T20:44:56.989Z,1543956296.989 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T20:44:56.989Z,1543956296.989 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T20:44:56.989Z,1543956296.989 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T20:45:40.744Z,1543956340.744 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:45:40.744Z,1543956340.744 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-04T20:45:40.744Z,1543956340.744 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:45:40.746Z,1543956340.746 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:45:40.746Z,1543956340.746 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-04T20:45:40.746Z,1543956340.746 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:45:40.772Z,1543956340.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:45:40.773Z,1543956340.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:45:41.166Z,1543956341.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:45:41.166Z,1543956341.166 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-04T20:45:41.167Z,1543956341.167 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:45:41.167Z,1543956341.167 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-04T20:45:41.562Z,1543956341.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:45:41.562Z,1543956341.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:45:41.563Z,1543956341.563 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:45:41.563Z,1543956341.563 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:45:41.563Z,1543956341.563 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:45:41.564Z,1543956341.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:47:06.204Z,1543956426.204 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T20:47:36.979Z,1543956456.979 [NAL9602](INFO): Powering down 2018-12-04T20:47:41.814Z,1543956461.814 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:47:41.814Z,1543956461.814 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-04T20:47:41.814Z,1543956461.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:47:41.816Z,1543956461.816 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:47:41.816Z,1543956461.816 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-04T20:47:41.816Z,1543956461.816 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:47:41.831Z,1543956461.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:47:41.831Z,1543956461.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:47:42.227Z,1543956462.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:47:42.227Z,1543956462.227 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-04T20:47:42.228Z,1543956462.228 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:47:42.228Z,1543956462.228 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-04T20:47:42.614Z,1543956462.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:47:42.614Z,1543956462.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:47:42.614Z,1543956462.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:47:42.615Z,1543956462.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:47:42.615Z,1543956462.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:47:42.616Z,1543956462.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:48:19.372Z,1543956499.372 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T20:49:42.643Z,1543956582.643 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:49:42.643Z,1543956582.643 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-04T20:49:42.643Z,1543956582.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:49:42.645Z,1543956582.645 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:49:42.645Z,1543956582.645 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-04T20:49:42.645Z,1543956582.645 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:49:42.680Z,1543956582.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:49:42.680Z,1543956582.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:49:43.042Z,1543956583.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:49:43.042Z,1543956583.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-04T20:49:43.043Z,1543956583.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:49:43.043Z,1543956583.043 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-04T20:49:43.438Z,1543956583.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:49:43.438Z,1543956583.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:49:43.439Z,1543956583.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:49:43.439Z,1543956583.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:49:43.440Z,1543956583.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:49:43.440Z,1543956583.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:49:57.438Z,1543956597.438 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T20:49:57.438Z,1543956597.438 [Default:CheckIn:C.Wait] Stopped 2018-12-04T20:49:57.438Z,1543956597.438 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T20:49:57.438Z,1543956597.438 [Default:CheckIn:D] Running Loop=1 2018-12-04T20:49:57.828Z,1543956597.828 [Default:CheckIn:D] Stopped 2018-12-04T20:49:57.829Z,1543956597.829 [Default:CheckIn:E] Running Loop=1 2018-12-04T20:49:58.237Z,1543956598.237 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1415.096745 min 2018-12-04T20:49:58.237Z,1543956598.237 [Default:CheckIn:E] Stopped 2018-12-04T20:49:58.237Z,1543956598.237 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T20:49:58.237Z,1543956598.237 [Default:CheckIn] Stopped 2018-12-04T20:49:58.237Z,1543956598.237 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T20:49:58.237Z,1543956598.237 [Default:CheckIn](INFO): Running loop #138 2018-12-04T20:49:58.237Z,1543956598.237 [Default:CheckIn] Running Loop=138 2018-12-04T20:49:58.238Z,1543956598.238 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T20:49:58.238Z,1543956598.238 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T20:49:59.001Z,1543956599.001 [NAL9602](INFO): Powering up 2018-12-04T20:50:09.808Z,1543956609.808 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:50:41.483Z,1543956641.483 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T20:50:41.558Z,1543956641.558 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T20:50:41.558Z,1543956641.558 [NAL9602] Data Fault, FailCount= 1 2018-12-04T20:50:41.558Z,1543956641.558 [NAL9602](ERROR): Data Fault 2018-12-04T20:50:41.622Z,1543956641.622 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T20:50:41.887Z,1543956641.887 [NAL9602](INFO): Powering down 2018-12-04T20:50:42.715Z,1543956642.715 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T20:50:42.715Z,1543956642.715 [NAL9602] No Fault, FailCount= 1 2018-12-04T20:51:12.236Z,1543956672.236 [NAL9602](INFO): Powering up NAL9602 2018-12-04T20:51:23.436Z,1543956683.436 [NAL9602](INFO): NAL9602 initialized 2018-12-04T20:51:43.838Z,1543956703.838 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:51:43.839Z,1543956703.839 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-04T20:51:43.839Z,1543956703.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:51:43.841Z,1543956703.841 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:51:43.841Z,1543956703.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-04T20:51:43.841Z,1543956703.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:51:43.887Z,1543956703.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:51:43.887Z,1543956703.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:51:44.246Z,1543956704.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:51:44.246Z,1543956704.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-04T20:51:44.246Z,1543956704.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:51:44.246Z,1543956704.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-04T20:51:44.628Z,1543956704.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:51:44.628Z,1543956704.628 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:51:44.628Z,1543956704.628 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:51:44.629Z,1543956704.629 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:51:44.629Z,1543956704.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:51:44.630Z,1543956704.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:53:44.779Z,1543956824.779 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:53:44.779Z,1543956824.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-04T20:53:44.779Z,1543956824.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:53:44.781Z,1543956824.781 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:53:44.781Z,1543956824.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-04T20:53:44.781Z,1543956824.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:53:44.807Z,1543956824.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:53:44.807Z,1543956824.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:53:45.206Z,1543956825.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:53:45.207Z,1543956825.207 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-04T20:53:45.207Z,1543956825.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:53:45.207Z,1543956825.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-04T20:53:45.573Z,1543956825.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:53:45.574Z,1543956825.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:53:45.593Z,1543956825.593 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:53:45.593Z,1543956825.593 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:53:45.594Z,1543956825.594 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:53:45.594Z,1543956825.594 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:54:59.485Z,1543956899.485 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T20:49:58.2Z 2018-12-04T20:54:59.485Z,1543956899.485 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T20:54:59.485Z,1543956899.485 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T20:55:04.569Z,1543956904.569 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0411.lzma 2018-12-04T20:55:05.374Z,1543956905.374 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0411.lzma.bak 2018-12-04T20:55:05.375Z,1543956905.375 [DataOverHttps](INFO): SBD MOMSN=8965977 2018-12-04T20:55:14.719Z,1543956914.719 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T20:55:14.779Z,1543956914.779 [DataOverHttps](INFO): Sending 327 bytes from file Logs/20181203T211451/Express0412.lzma 2018-12-04T20:55:15.577Z,1543956915.577 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0412.lzma.bak 2018-12-04T20:55:15.577Z,1543956915.577 [DataOverHttps](INFO): SBD MOMSN=8965979 2018-12-04T20:55:17.049Z,1543956917.049 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T20:55:17.049Z,1543956917.049 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T20:55:17.049Z,1543956917.049 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T20:55:45.227Z,1543956945.227 [NAL9602](INFO): Powering down 2018-12-04T20:55:45.653Z,1543956945.653 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:55:45.653Z,1543956945.653 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-04T20:55:45.653Z,1543956945.653 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:55:45.655Z,1543956945.655 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:55:45.655Z,1543956945.655 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-04T20:55:45.655Z,1543956945.655 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:55:45.669Z,1543956945.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:55:45.669Z,1543956945.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:55:46.065Z,1543956946.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:55:46.065Z,1543956946.065 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-04T20:55:46.065Z,1543956946.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:55:46.065Z,1543956946.065 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-04T20:55:46.458Z,1543956946.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:55:46.458Z,1543956946.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:55:46.459Z,1543956946.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:55:46.459Z,1543956946.459 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:55:46.459Z,1543956946.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:55:46.460Z,1543956946.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:57:46.771Z,1543957066.771 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:57:46.771Z,1543957066.771 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-04T20:57:46.771Z,1543957066.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:57:46.773Z,1543957066.773 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:57:46.774Z,1543957066.774 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-04T20:57:46.774Z,1543957066.774 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:57:46.787Z,1543957066.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:57:46.787Z,1543957066.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:57:47.190Z,1543957067.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:57:47.190Z,1543957067.190 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-04T20:57:47.191Z,1543957067.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:57:47.191Z,1543957067.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-04T20:57:47.573Z,1543957067.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:57:47.573Z,1543957067.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:57:47.574Z,1543957067.574 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:57:47.574Z,1543957067.574 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:57:47.575Z,1543957067.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:57:47.575Z,1543957067.575 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:59:47.711Z,1543957187.711 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:59:47.711Z,1543957187.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-04T20:59:47.711Z,1543957187.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T20:59:47.713Z,1543957187.713 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T20:59:47.713Z,1543957187.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-04T20:59:47.713Z,1543957187.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T20:59:47.728Z,1543957187.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T20:59:47.728Z,1543957187.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T20:59:48.121Z,1543957188.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T20:59:48.121Z,1543957188.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-04T20:59:48.122Z,1543957188.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T20:59:48.122Z,1543957188.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-04T20:59:48.514Z,1543957188.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T20:59:48.514Z,1543957188.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:59:48.515Z,1543957188.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T20:59:48.515Z,1543957188.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T20:59:48.515Z,1543957188.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T20:59:48.516Z,1543957188.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:00:17.274Z,1543957217.274 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T21:00:17.274Z,1543957217.274 [Default:CheckIn:C.Wait] Stopped 2018-12-04T21:00:17.274Z,1543957217.274 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T21:00:17.274Z,1543957217.274 [Default:CheckIn:D] Running Loop=1 2018-12-04T21:00:17.677Z,1543957217.677 [Default:CheckIn:D] Stopped 2018-12-04T21:00:17.677Z,1543957217.677 [Default:CheckIn:E] Running Loop=1 2018-12-04T21:00:18.082Z,1543957218.082 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1425.427604 min 2018-12-04T21:00:18.082Z,1543957218.082 [Default:CheckIn:E] Stopped 2018-12-04T21:00:18.082Z,1543957218.082 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T21:00:18.083Z,1543957218.083 [Default:CheckIn] Stopped 2018-12-04T21:00:18.083Z,1543957218.083 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T21:00:18.083Z,1543957218.083 [Default:CheckIn](INFO): Running loop #139 2018-12-04T21:00:18.083Z,1543957218.083 [Default:CheckIn] Running Loop=139 2018-12-04T21:00:18.083Z,1543957218.083 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T21:00:18.083Z,1543957218.083 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T21:00:18.848Z,1543957218.848 [NAL9602](INFO): Powering up 2018-12-04T21:00:30.048Z,1543957230.048 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:00:30.846Z,1543957230.846 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T21:00:30.846Z,1543957230.846 [NAL9602] Data Fault, FailCount= 2 2018-12-04T21:00:30.846Z,1543957230.846 [NAL9602](ERROR): Data Fault 2018-12-04T21:00:30.902Z,1543957230.902 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T21:00:31.248Z,1543957231.248 [NAL9602](INFO): Powering down 2018-12-04T21:00:32.091Z,1543957232.091 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T21:00:32.091Z,1543957232.091 [NAL9602] No Fault, FailCount= 2 2018-12-04T21:01:01.604Z,1543957261.604 [NAL9602](INFO): Powering up NAL9602 2018-12-04T21:01:12.921Z,1543957272.921 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:01:48.551Z,1543957308.551 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:01:48.551Z,1543957308.551 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-04T21:01:48.552Z,1543957308.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:01:48.554Z,1543957308.554 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:01:48.554Z,1543957308.554 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-04T21:01:48.554Z,1543957308.554 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:01:48.602Z,1543957308.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:01:48.603Z,1543957308.603 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:01:48.954Z,1543957308.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:01:48.954Z,1543957308.954 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-04T21:01:48.955Z,1543957308.955 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:01:48.955Z,1543957308.955 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-04T21:01:49.338Z,1543957309.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:01:49.339Z,1543957309.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:01:49.339Z,1543957309.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:01:49.339Z,1543957309.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:01:49.340Z,1543957309.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:01:49.340Z,1543957309.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:03:49.721Z,1543957429.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:03:49.721Z,1543957429.721 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-04T21:03:49.721Z,1543957429.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:03:49.723Z,1543957429.723 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:03:49.723Z,1543957429.723 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-04T21:03:49.723Z,1543957429.723 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:03:49.754Z,1543957429.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:03:49.755Z,1543957429.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:03:50.155Z,1543957430.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:03:50.155Z,1543957430.155 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-04T21:03:50.156Z,1543957430.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:03:50.156Z,1543957430.156 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-04T21:03:50.530Z,1543957430.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:03:50.545Z,1543957430.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:03:50.545Z,1543957430.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:03:50.545Z,1543957430.545 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:03:50.546Z,1543957430.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:03:50.546Z,1543957430.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:05:18.817Z,1543957518.817 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T21:00:18.1Z 2018-12-04T21:05:18.818Z,1543957518.818 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T21:05:18.818Z,1543957518.818 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T21:05:23.792Z,1543957523.792 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0414.lzma 2018-12-04T21:05:24.594Z,1543957524.594 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0414.lzma.bak 2018-12-04T21:05:24.594Z,1543957524.594 [DataOverHttps](INFO): SBD MOMSN=8966003 2018-12-04T21:05:34.132Z,1543957534.132 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0415.lzma 2018-12-04T21:05:34.906Z,1543957534.906 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0415.lzma.bak 2018-12-04T21:05:34.907Z,1543957534.907 [DataOverHttps](INFO): SBD MOMSN=8966005 2018-12-04T21:05:36.284Z,1543957536.284 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T21:05:36.284Z,1543957536.284 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T21:05:36.284Z,1543957536.284 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T21:05:50.798Z,1543957550.798 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:05:50.798Z,1543957550.798 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-04T21:05:50.799Z,1543957550.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:05:50.801Z,1543957550.801 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:05:50.801Z,1543957550.801 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-04T21:05:50.801Z,1543957550.801 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:05:50.857Z,1543957550.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:05:50.857Z,1543957550.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:05:51.199Z,1543957551.199 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:05:51.199Z,1543957551.199 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-04T21:05:51.199Z,1543957551.199 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:05:51.199Z,1543957551.199 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-04T21:05:51.586Z,1543957551.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:05:51.587Z,1543957551.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:05:51.587Z,1543957551.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:05:51.587Z,1543957551.587 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:05:51.588Z,1543957551.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:05:51.588Z,1543957551.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:06:16.008Z,1543957576.008 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T21:06:43.999Z,1543957603.999 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T21:06:43.999Z,1543957603.999 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T21:06:43.999Z,1543957603.999 [DropWeight](ERROR): Hardware Fault 2018-12-04T21:06:44.059Z,1543957604.059 [CBIT](INFO): Critical error at 20181204T210643 2018-12-04T21:06:44.061Z,1543957604.061 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T21:06:44.062Z,1543957604.062 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T21:06:44.458Z,1543957604.458 [CBIT](INFO): Critical error at 20181204T210644 2018-12-04T21:06:46.798Z,1543957606.798 [NAL9602](INFO): Powering down 2018-12-04T21:07:51.710Z,1543957671.710 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:07:51.710Z,1543957671.710 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-04T21:07:51.711Z,1543957671.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:07:51.713Z,1543957671.713 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:07:51.713Z,1543957671.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-04T21:07:51.713Z,1543957671.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:07:51.726Z,1543957671.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:07:51.726Z,1543957671.726 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:07:51.727Z,1543957671.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:07:51.727Z,1543957671.727 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:10:36.387Z,1543957836.387 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T21:10:36.387Z,1543957836.387 [Default:CheckIn:C.Wait] Stopped 2018-12-04T21:10:36.388Z,1543957836.388 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T21:10:36.388Z,1543957836.388 [Default:CheckIn:D] Running Loop=1 2018-12-04T21:10:36.795Z,1543957836.795 [Default:CheckIn:D] Stopped 2018-12-04T21:10:36.795Z,1543957836.795 [Default:CheckIn:E] Running Loop=1 2018-12-04T21:10:37.193Z,1543957837.193 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1435.746224 min 2018-12-04T21:10:37.193Z,1543957837.193 [Default:CheckIn:E] Stopped 2018-12-04T21:10:37.194Z,1543957837.194 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T21:10:37.194Z,1543957837.194 [Default:CheckIn] Stopped 2018-12-04T21:10:37.194Z,1543957837.194 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T21:10:37.194Z,1543957837.194 [Default:CheckIn](INFO): Running loop #140 2018-12-04T21:10:37.194Z,1543957837.194 [Default:CheckIn] Running Loop=140 2018-12-04T21:10:37.194Z,1543957837.194 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T21:10:37.194Z,1543957837.194 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T21:10:37.963Z,1543957837.963 [NAL9602](INFO): Powering up 2018-12-04T21:10:49.168Z,1543957849.168 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:15:38.719Z,1543958138.719 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T21:10:37.2Z 2018-12-04T21:15:38.719Z,1543958138.719 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T21:15:38.719Z,1543958138.719 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T21:15:43.662Z,1543958143.662 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0417.lzma 2018-12-04T21:15:44.448Z,1543958144.448 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0417.lzma.bak 2018-12-04T21:15:44.448Z,1543958144.448 [DataOverHttps](INFO): SBD MOMSN=8966027 2018-12-04T21:15:53.930Z,1543958153.930 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T21:15:54.003Z,1543958154.003 [DataOverHttps](INFO): Sending 339 bytes from file Logs/20181203T211451/Express0418.lzma 2018-12-04T21:15:54.802Z,1543958154.802 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0418.lzma.bak 2018-12-04T21:15:54.804Z,1543958154.804 [DataOverHttps](INFO): SBD MOMSN=8966031 2018-12-04T21:15:56.133Z,1543958156.133 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T21:15:56.133Z,1543958156.133 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T21:15:56.133Z,1543958156.133 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T21:16:24.105Z,1543958184.105 [NAL9602](INFO): Powering down 2018-12-04T21:20:56.263Z,1543958456.263 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T21:20:56.263Z,1543958456.263 [Default:CheckIn:C.Wait] Stopped 2018-12-04T21:20:56.263Z,1543958456.263 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T21:20:56.263Z,1543958456.263 [Default:CheckIn:D] Running Loop=1 2018-12-04T21:20:56.662Z,1543958456.662 [Default:CheckIn:D] Stopped 2018-12-04T21:20:56.662Z,1543958456.662 [Default:CheckIn:E] Running Loop=1 2018-12-04T21:20:57.058Z,1543958457.058 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1446.077344 min 2018-12-04T21:20:57.059Z,1543958457.059 [Default:CheckIn:E] Stopped 2018-12-04T21:20:57.059Z,1543958457.059 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T21:20:57.059Z,1543958457.059 [Default:CheckIn] Stopped 2018-12-04T21:20:57.059Z,1543958457.059 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T21:20:57.059Z,1543958457.059 [Default:CheckIn](INFO): Running loop #141 2018-12-04T21:20:57.059Z,1543958457.059 [Default:CheckIn] Running Loop=141 2018-12-04T21:20:57.059Z,1543958457.059 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T21:20:57.060Z,1543958457.060 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T21:20:57.839Z,1543958457.839 [NAL9602](INFO): Powering up 2018-12-04T21:21:09.039Z,1543958469.039 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:21:09.843Z,1543958469.843 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T21:21:09.843Z,1543958469.843 [NAL9602] Data Fault, FailCount= 3 2018-12-04T21:21:09.843Z,1543958469.843 [NAL9602](ERROR): Data Fault 2018-12-04T21:21:09.874Z,1543958469.874 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T21:21:10.236Z,1543958470.236 [NAL9602](INFO): Powering down 2018-12-04T21:21:11.073Z,1543958471.073 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T21:21:11.073Z,1543958471.073 [NAL9602] No Fault, FailCount= 3 2018-12-04T21:21:40.595Z,1543958500.595 [NAL9602](INFO): Powering up NAL9602 2018-12-04T21:21:44.222Z,1543958504.222 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T21:21:44.222Z,1543958504.222 [DropWeight] No Fault, FailCount= 1 2018-12-04T21:21:52.136Z,1543958512.136 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:22:51.814Z,1543958571.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:22:51.814Z,1543958571.814 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-04T21:22:51.815Z,1543958571.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:22:51.815Z,1543958571.815 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-04T21:22:52.131Z,1543958572.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:22:52.132Z,1543958572.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:22:52.132Z,1543958572.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:22:52.132Z,1543958572.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:22:52.133Z,1543958572.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:22:52.133Z,1543958572.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:24:52.300Z,1543958692.300 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:24:52.300Z,1543958692.300 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-04T21:24:52.300Z,1543958692.300 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:24:52.302Z,1543958692.302 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:24:52.302Z,1543958692.302 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-04T21:24:52.302Z,1543958692.302 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:24:52.315Z,1543958692.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:24:52.316Z,1543958692.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:24:52.718Z,1543958692.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:24:52.718Z,1543958692.718 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-04T21:24:52.719Z,1543958692.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:24:52.719Z,1543958692.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-04T21:24:53.110Z,1543958693.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:24:53.110Z,1543958693.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:24:53.111Z,1543958693.111 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:24:53.111Z,1543958693.111 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:24:53.111Z,1543958693.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:24:53.112Z,1543958693.112 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:25:58.199Z,1543958758.199 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T21:20:57.1Z 2018-12-04T21:25:58.199Z,1543958758.199 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T21:25:58.199Z,1543958758.199 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T21:26:03.194Z,1543958763.194 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0420.lzma 2018-12-04T21:26:03.973Z,1543958763.973 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0420.lzma.bak 2018-12-04T21:26:03.973Z,1543958763.973 [DataOverHttps](INFO): SBD MOMSN=8966048 2018-12-04T21:26:13.341Z,1543958773.341 [DataOverHttps](INFO): Sending 268 bytes from file Logs/20181203T211451/Express0421.lzma 2018-12-04T21:26:14.115Z,1543958774.115 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0421.lzma.bak 2018-12-04T21:26:14.115Z,1543958774.115 [DataOverHttps](INFO): SBD MOMSN=8966050 2018-12-04T21:26:15.442Z,1543958775.442 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T21:26:15.442Z,1543958775.442 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T21:26:15.442Z,1543958775.442 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T21:26:54.303Z,1543958814.303 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:26:54.303Z,1543958814.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-04T21:26:54.303Z,1543958814.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:26:54.305Z,1543958814.305 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:26:54.305Z,1543958814.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-04T21:26:54.305Z,1543958814.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:26:54.356Z,1543958814.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:26:54.356Z,1543958814.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:26:54.451Z,1543958814.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:26:54.451Z,1543958814.451 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-04T21:26:54.451Z,1543958814.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:26:54.451Z,1543958814.451 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-04T21:26:54.822Z,1543958814.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:26:54.823Z,1543958814.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:26:54.823Z,1543958814.823 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:26:54.823Z,1543958814.823 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:26:54.824Z,1543958814.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:26:54.824Z,1543958814.824 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:26:55.196Z,1543958815.196 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T21:27:25.988Z,1543958845.988 [NAL9602](INFO): Powering down 2018-12-04T21:28:55.177Z,1543958935.177 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:28:55.177Z,1543958935.177 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-04T21:28:55.177Z,1543958935.177 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:28:55.180Z,1543958935.180 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:28:55.180Z,1543958935.180 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-04T21:28:55.180Z,1543958935.180 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:28:55.193Z,1543958935.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:28:55.193Z,1543958935.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:28:55.613Z,1543958935.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:28:55.613Z,1543958935.613 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-04T21:28:55.613Z,1543958935.613 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:28:55.614Z,1543958935.614 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-04T21:28:55.974Z,1543958935.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:28:55.974Z,1543958935.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:28:55.975Z,1543958935.975 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:28:55.975Z,1543958935.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:28:55.976Z,1543958935.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:28:55.976Z,1543958935.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:30:56.314Z,1543959056.314 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:30:56.314Z,1543959056.314 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-04T21:30:56.314Z,1543959056.314 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:30:56.316Z,1543959056.316 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:30:56.316Z,1543959056.316 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-04T21:30:56.316Z,1543959056.316 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:30:56.329Z,1543959056.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:30:56.330Z,1543959056.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:30:56.743Z,1543959056.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:30:56.743Z,1543959056.743 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-04T21:30:56.743Z,1543959056.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:30:56.743Z,1543959056.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-04T21:30:57.117Z,1543959057.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:30:57.117Z,1543959057.117 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:30:57.118Z,1543959057.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:30:57.118Z,1543959057.118 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:30:57.119Z,1543959057.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:30:57.119Z,1543959057.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:31:15.929Z,1543959075.929 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T21:31:15.929Z,1543959075.929 [Default:CheckIn:C.Wait] Stopped 2018-12-04T21:31:15.929Z,1543959075.929 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T21:31:15.929Z,1543959075.929 [Default:CheckIn:D] Running Loop=1 2018-12-04T21:31:16.334Z,1543959076.334 [Default:CheckIn:D] Stopped 2018-12-04T21:31:16.334Z,1543959076.334 [Default:CheckIn:E] Running Loop=1 2018-12-04T21:31:16.734Z,1543959076.734 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1456.405208 min 2018-12-04T21:31:16.734Z,1543959076.734 [Default:CheckIn:E] Stopped 2018-12-04T21:31:16.734Z,1543959076.734 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T21:31:16.735Z,1543959076.735 [Default:CheckIn] Stopped 2018-12-04T21:31:16.735Z,1543959076.735 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T21:31:16.735Z,1543959076.735 [Default:CheckIn](INFO): Running loop #142 2018-12-04T21:31:16.735Z,1543959076.735 [Default:CheckIn] Running Loop=142 2018-12-04T21:31:16.735Z,1543959076.735 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T21:31:16.735Z,1543959076.735 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T21:31:17.506Z,1543959077.506 [NAL9602](INFO): Powering up 2018-12-04T21:31:28.711Z,1543959088.711 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:32:00.392Z,1543959120.392 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T21:32:00.470Z,1543959120.470 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T21:32:00.470Z,1543959120.470 [NAL9602] Data Fault, FailCount= 4 2018-12-04T21:32:00.470Z,1543959120.470 [NAL9602](ERROR): Data Fault 2018-12-04T21:32:00.550Z,1543959120.550 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T21:32:00.792Z,1543959120.792 [NAL9602](INFO): Powering down 2018-12-04T21:32:01.629Z,1543959121.629 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T21:32:01.629Z,1543959121.629 [NAL9602] No Fault, FailCount= 4 2018-12-04T21:32:31.176Z,1543959151.176 [NAL9602](INFO): Powering up NAL9602 2018-12-04T21:32:42.380Z,1543959162.380 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:32:43.177Z,1543959163.177 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T21:32:43.177Z,1543959163.177 [NAL9602] Data Fault, FailCount= 5 2018-12-04T21:32:43.177Z,1543959163.177 [NAL9602](ERROR): Data Fault 2018-12-04T21:32:43.236Z,1543959163.236 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T21:32:43.236Z,1543959163.236 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T21:32:46.342Z,1543959166.342 [NAL9602](INFO): Powering down 2018-12-04T21:32:46.386Z,1543959166.386 [CBIT](INFO): Critical error at 20181204T213243 2018-12-04T21:32:57.225Z,1543959177.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:32:57.225Z,1543959177.225 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-04T21:32:57.225Z,1543959177.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:32:57.227Z,1543959177.227 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:32:57.227Z,1543959177.227 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-04T21:32:57.227Z,1543959177.227 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:32:57.241Z,1543959177.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:32:57.241Z,1543959177.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:32:57.646Z,1543959177.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:32:57.646Z,1543959177.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-04T21:32:57.647Z,1543959177.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:32:57.647Z,1543959177.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-04T21:32:58.026Z,1543959178.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:32:58.027Z,1543959178.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:32:58.027Z,1543959178.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:32:58.028Z,1543959178.028 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:32:58.028Z,1543959178.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:32:58.028Z,1543959178.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:34:43.242Z,1543959283.242 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T21:34:43.242Z,1543959283.242 [NAL9602] No Fault, FailCount= 5 2018-12-04T21:34:43.604Z,1543959283.604 [NAL9602](INFO): Powering up NAL9602 2018-12-04T21:34:54.804Z,1543959294.804 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:34:58.054Z,1543959298.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:34:58.055Z,1543959298.055 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-04T21:34:58.055Z,1543959298.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:34:58.057Z,1543959298.057 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:34:58.057Z,1543959298.057 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-04T21:34:58.057Z,1543959298.057 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:34:58.071Z,1543959298.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:34:58.071Z,1543959298.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:34:58.462Z,1543959298.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:34:58.462Z,1543959298.462 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-04T21:34:58.462Z,1543959298.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:34:58.462Z,1543959298.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-04T21:34:58.840Z,1543959298.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:34:58.840Z,1543959298.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:34:58.840Z,1543959298.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:34:58.841Z,1543959298.841 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:34:58.841Z,1543959298.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:34:58.841Z,1543959298.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:36:17.558Z,1543959377.558 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T21:31:16.7Z 2018-12-04T21:36:17.558Z,1543959377.558 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T21:36:17.559Z,1543959377.559 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T21:36:22.513Z,1543959382.513 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0423.lzma 2018-12-04T21:36:23.338Z,1543959383.338 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0423.lzma.bak 2018-12-04T21:36:23.338Z,1543959383.338 [DataOverHttps](INFO): SBD MOMSN=8966066 2018-12-04T21:36:32.811Z,1543959392.811 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T21:36:32.900Z,1543959392.900 [DataOverHttps](INFO): Sending 346 bytes from file Logs/20181203T211451/Express0424.lzma 2018-12-04T21:36:33.669Z,1543959393.669 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0424.lzma.bak 2018-12-04T21:36:33.669Z,1543959393.669 [DataOverHttps](INFO): SBD MOMSN=8966069 2018-12-04T21:36:34.992Z,1543959394.992 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T21:36:34.992Z,1543959394.992 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T21:36:34.992Z,1543959394.992 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T21:36:58.994Z,1543959418.994 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:36:58.994Z,1543959418.994 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-04T21:36:58.994Z,1543959418.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:36:58.996Z,1543959418.996 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:36:58.996Z,1543959418.996 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-04T21:36:58.996Z,1543959418.996 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:36:59.010Z,1543959419.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:36:59.010Z,1543959419.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:36:59.413Z,1543959419.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:36:59.413Z,1543959419.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-04T21:36:59.413Z,1543959419.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:36:59.414Z,1543959419.414 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-04T21:36:59.801Z,1543959419.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:36:59.801Z,1543959419.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:36:59.801Z,1543959419.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:36:59.802Z,1543959419.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:36:59.803Z,1543959419.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:36:59.803Z,1543959419.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:37:02.976Z,1543959422.976 [NAL9602](INFO): Powering down 2018-12-04T21:38:59.916Z,1543959539.916 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:38:59.916Z,1543959539.916 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-04T21:38:59.916Z,1543959539.916 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:38:59.918Z,1543959539.918 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:38:59.918Z,1543959539.918 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-04T21:38:59.918Z,1543959539.918 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:38:59.931Z,1543959539.931 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:38:59.931Z,1543959539.931 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:39:00.329Z,1543959540.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:39:00.329Z,1543959540.329 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-04T21:39:00.330Z,1543959540.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:39:00.330Z,1543959540.330 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-04T21:39:00.718Z,1543959540.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:39:00.719Z,1543959540.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:39:00.719Z,1543959540.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:39:00.719Z,1543959540.719 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:39:00.720Z,1543959540.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:39:00.720Z,1543959540.720 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:41:00.814Z,1543959660.814 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:41:00.814Z,1543959660.814 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-04T21:41:00.814Z,1543959660.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:41:00.816Z,1543959660.816 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:41:00.817Z,1543959660.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-04T21:41:00.817Z,1543959660.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:41:00.830Z,1543959660.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:41:00.830Z,1543959660.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:41:01.219Z,1543959661.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:41:01.219Z,1543959661.219 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-04T21:41:01.220Z,1543959661.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:41:01.220Z,1543959661.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-04T21:41:01.614Z,1543959661.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:41:01.615Z,1543959661.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:41:01.615Z,1543959661.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:41:01.616Z,1543959661.616 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:41:01.616Z,1543959661.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:41:01.616Z,1543959661.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:41:35.220Z,1543959695.220 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T21:41:35.220Z,1543959695.220 [Default:CheckIn:C.Wait] Stopped 2018-12-04T21:41:35.220Z,1543959695.220 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T21:41:35.220Z,1543959695.220 [Default:CheckIn:D] Running Loop=1 2018-12-04T21:41:35.626Z,1543959695.626 [Default:CheckIn:D] Stopped 2018-12-04T21:41:35.626Z,1543959695.626 [Default:CheckIn:E] Running Loop=1 2018-12-04T21:41:36.043Z,1543959696.043 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1466.726693 min 2018-12-04T21:41:36.044Z,1543959696.044 [Default:CheckIn:E] Stopped 2018-12-04T21:41:36.044Z,1543959696.044 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T21:41:36.044Z,1543959696.044 [Default:CheckIn] Stopped 2018-12-04T21:41:36.044Z,1543959696.044 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T21:41:36.044Z,1543959696.044 [Default:CheckIn](INFO): Running loop #143 2018-12-04T21:41:36.044Z,1543959696.044 [Default:CheckIn] Running Loop=143 2018-12-04T21:41:36.044Z,1543959696.044 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T21:41:36.044Z,1543959696.044 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T21:41:36.799Z,1543959696.799 [NAL9602](INFO): Powering up 2018-12-04T21:41:47.600Z,1543959707.600 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:42:19.564Z,1543959739.564 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T21:42:19.646Z,1543959739.646 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T21:42:19.646Z,1543959739.646 [NAL9602] Data Fault, FailCount= 1 2018-12-04T21:42:19.646Z,1543959739.646 [NAL9602](ERROR): Data Fault 2018-12-04T21:42:19.685Z,1543959739.685 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T21:42:19.964Z,1543959739.964 [NAL9602](INFO): Powering down 2018-12-04T21:42:20.824Z,1543959740.824 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T21:42:20.824Z,1543959740.824 [NAL9602] No Fault, FailCount= 1 2018-12-04T21:42:50.338Z,1543959770.338 [NAL9602](INFO): Powering up NAL9602 2018-12-04T21:43:01.140Z,1543959781.140 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:43:01.982Z,1543959781.982 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:43:01.982Z,1543959781.982 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-04T21:43:01.982Z,1543959781.982 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:43:01.984Z,1543959781.984 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:43:01.985Z,1543959781.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-04T21:43:01.985Z,1543959781.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:43:01.998Z,1543959781.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:43:01.999Z,1543959781.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:43:02.410Z,1543959782.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:43:02.414Z,1543959782.414 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-04T21:43:02.415Z,1543959782.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:43:02.415Z,1543959782.415 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-04T21:43:02.778Z,1543959782.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:43:02.779Z,1543959782.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:43:02.779Z,1543959782.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:43:02.780Z,1543959782.780 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:43:02.780Z,1543959782.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:43:02.780Z,1543959782.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:45:03.011Z,1543959903.011 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:45:03.011Z,1543959903.011 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-04T21:45:03.011Z,1543959903.011 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:45:03.013Z,1543959903.013 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:45:03.013Z,1543959903.013 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-04T21:45:03.014Z,1543959903.014 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:45:03.028Z,1543959903.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:45:03.028Z,1543959903.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:45:03.463Z,1543959903.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:45:03.463Z,1543959903.463 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-04T21:45:03.463Z,1543959903.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:45:03.463Z,1543959903.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-04T21:45:03.810Z,1543959903.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:45:03.811Z,1543959903.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:45:03.811Z,1543959903.811 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:45:03.811Z,1543959903.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:45:03.812Z,1543959903.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:45:03.812Z,1543959903.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:46:37.250Z,1543959997.250 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T21:41:36.0Z 2018-12-04T21:46:37.250Z,1543959997.250 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T21:46:37.251Z,1543959997.251 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T21:46:42.377Z,1543960002.377 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0426.lzma 2018-12-04T21:46:43.177Z,1543960003.177 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0426.lzma.bak 2018-12-04T21:46:43.177Z,1543960003.177 [DataOverHttps](INFO): SBD MOMSN=8966092 2018-12-04T21:46:52.437Z,1543960012.437 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T21:46:52.517Z,1543960012.517 [DataOverHttps](INFO): Sending 323 bytes from file Logs/20181203T211451/Express0427.lzma 2018-12-04T21:46:53.294Z,1543960013.294 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0427.lzma.bak 2018-12-04T21:46:53.294Z,1543960013.294 [DataOverHttps](INFO): SBD MOMSN=8966094 2018-12-04T21:46:54.771Z,1543960014.771 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T21:46:54.771Z,1543960014.771 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T21:46:54.771Z,1543960014.771 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T21:47:04.125Z,1543960024.125 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:47:04.125Z,1543960024.125 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-04T21:47:04.125Z,1543960024.125 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:47:04.128Z,1543960024.128 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:47:04.128Z,1543960024.128 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-04T21:47:04.128Z,1543960024.128 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:47:04.141Z,1543960024.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:47:04.141Z,1543960024.141 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:47:04.542Z,1543960024.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:47:04.542Z,1543960024.542 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-04T21:47:04.543Z,1543960024.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:47:04.543Z,1543960024.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-04T21:47:04.922Z,1543960024.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:47:04.922Z,1543960024.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:47:04.923Z,1543960024.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:47:04.934Z,1543960024.934 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:47:04.935Z,1543960024.935 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:47:04.935Z,1543960024.935 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:47:22.903Z,1543960042.903 [NAL9602](INFO): Powering down 2018-12-04T21:49:04.987Z,1543960144.987 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:49:04.987Z,1543960144.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-04T21:49:04.987Z,1543960144.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:49:04.989Z,1543960144.989 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:49:04.989Z,1543960144.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-04T21:49:04.989Z,1543960144.989 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:49:05.003Z,1543960145.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:49:05.003Z,1543960145.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:49:05.403Z,1543960145.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:49:05.403Z,1543960145.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-04T21:49:05.404Z,1543960145.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:49:05.404Z,1543960145.404 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-04T21:49:05.798Z,1543960145.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:49:05.798Z,1543960145.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:49:05.799Z,1543960145.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:49:05.799Z,1543960145.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:49:05.799Z,1543960145.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:49:05.800Z,1543960145.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:51:06.164Z,1543960266.164 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:51:06.165Z,1543960266.165 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-04T21:51:06.165Z,1543960266.165 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:51:06.167Z,1543960266.167 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:51:06.167Z,1543960266.167 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-04T21:51:06.167Z,1543960266.167 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:51:06.180Z,1543960266.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:51:06.180Z,1543960266.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:51:06.576Z,1543960266.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:51:06.576Z,1543960266.576 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-04T21:51:06.577Z,1543960266.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:51:06.577Z,1543960266.577 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-04T21:51:06.965Z,1543960266.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:51:06.966Z,1543960266.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:51:06.966Z,1543960266.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:51:06.967Z,1543960266.967 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:51:06.967Z,1543960266.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:51:06.967Z,1543960266.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:51:45.688Z,1543960305.688 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T21:51:45.688Z,1543960305.688 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T21:51:45.688Z,1543960305.688 [DropWeight](ERROR): Hardware Fault 2018-12-04T21:51:45.778Z,1543960305.778 [CBIT](INFO): Critical error at 20181204T215145 2018-12-04T21:51:45.785Z,1543960305.785 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T21:51:45.786Z,1543960305.786 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T21:51:46.140Z,1543960306.140 [CBIT](INFO): Critical error at 20181204T215145 2018-12-04T21:51:54.921Z,1543960314.921 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T21:51:54.922Z,1543960314.922 [Default:CheckIn:C.Wait] Stopped 2018-12-04T21:51:54.922Z,1543960314.922 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T21:51:54.922Z,1543960314.922 [Default:CheckIn:D] Running Loop=1 2018-12-04T21:51:55.321Z,1543960315.321 [Default:CheckIn:D] Stopped 2018-12-04T21:51:55.321Z,1543960315.321 [Default:CheckIn:E] Running Loop=1 2018-12-04T21:51:55.721Z,1543960315.721 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1477.054948 min 2018-12-04T21:51:55.721Z,1543960315.721 [Default:CheckIn:E] Stopped 2018-12-04T21:51:55.722Z,1543960315.722 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T21:51:55.722Z,1543960315.722 [Default:CheckIn] Stopped 2018-12-04T21:51:55.722Z,1543960315.722 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T21:51:55.722Z,1543960315.722 [Default:CheckIn](INFO): Running loop #144 2018-12-04T21:51:55.722Z,1543960315.722 [Default:CheckIn] Running Loop=144 2018-12-04T21:51:55.723Z,1543960315.723 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T21:51:55.723Z,1543960315.723 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T21:51:56.483Z,1543960316.483 [NAL9602](INFO): Powering up 2018-12-04T21:52:07.688Z,1543960327.688 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:52:08.484Z,1543960328.484 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T21:52:08.484Z,1543960328.484 [NAL9602] Data Fault, FailCount= 2 2018-12-04T21:52:08.484Z,1543960328.484 [NAL9602](ERROR): Data Fault 2018-12-04T21:52:08.552Z,1543960328.552 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T21:52:08.883Z,1543960328.883 [NAL9602](INFO): Powering down 2018-12-04T21:52:09.725Z,1543960329.725 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T21:52:09.725Z,1543960329.725 [NAL9602] No Fault, FailCount= 2 2018-12-04T21:52:39.280Z,1543960359.280 [NAL9602](INFO): Powering up NAL9602 2018-12-04T21:52:50.835Z,1543960370.835 [NAL9602](INFO): NAL9602 initialized 2018-12-04T21:53:07.263Z,1543960387.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:53:07.263Z,1543960387.263 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-04T21:53:07.263Z,1543960387.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:53:07.265Z,1543960387.265 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:53:07.265Z,1543960387.265 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-04T21:53:07.265Z,1543960387.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:53:07.316Z,1543960387.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:53:07.316Z,1543960387.316 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:53:07.675Z,1543960387.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:53:07.675Z,1543960387.675 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-04T21:53:07.676Z,1543960387.676 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:53:07.676Z,1543960387.676 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-04T21:53:08.062Z,1543960388.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:53:08.062Z,1543960388.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:53:08.063Z,1543960388.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:53:08.063Z,1543960388.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:53:08.063Z,1543960388.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:53:08.064Z,1543960388.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:55:08.194Z,1543960508.194 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:55:08.195Z,1543960508.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-04T21:55:08.195Z,1543960508.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:55:08.197Z,1543960508.197 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:55:08.197Z,1543960508.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-04T21:55:08.197Z,1543960508.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:55:08.255Z,1543960508.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:55:08.256Z,1543960508.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:55:11.331Z,1543960511.331 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:55:11.331Z,1543960511.331 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-04T21:55:11.332Z,1543960511.332 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:55:11.332Z,1543960511.332 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-04T21:55:11.423Z,1543960511.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:55:11.423Z,1543960511.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:55:11.424Z,1543960511.424 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:55:11.424Z,1543960511.424 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:55:11.424Z,1543960511.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:55:11.425Z,1543960511.425 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:55:52.161Z,1543960552.161 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-04T21:56:57.038Z,1543960617.038 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T21:51:55.7Z 2018-12-04T21:56:57.038Z,1543960617.038 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T21:56:57.039Z,1543960617.039 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T21:57:02.071Z,1543960622.071 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0429.lzma 2018-12-04T21:57:02.858Z,1543960622.858 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0429.lzma.bak 2018-12-04T21:57:02.858Z,1543960622.858 [DataOverHttps](INFO): SBD MOMSN=8966116 2018-12-04T21:57:12.181Z,1543960632.181 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:57:12.182Z,1543960632.182 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-04T21:57:12.182Z,1543960632.182 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:57:12.211Z,1543960632.211 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:57:12.211Z,1543960632.211 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-04T21:57:12.211Z,1543960632.211 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:57:12.256Z,1543960632.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:57:12.256Z,1543960632.256 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:57:12.283Z,1543960632.283 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0430.lzma 2018-12-04T21:57:12.379Z,1543960632.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:57:12.379Z,1543960632.379 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-04T21:57:12.380Z,1543960632.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:57:12.380Z,1543960632.380 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-04T21:57:12.720Z,1543960632.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:57:12.720Z,1543960632.720 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:57:12.721Z,1543960632.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:57:12.721Z,1543960632.721 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:57:12.722Z,1543960632.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:57:12.722Z,1543960632.722 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:57:13.069Z,1543960633.069 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0430.lzma.bak 2018-12-04T21:57:13.069Z,1543960633.069 [DataOverHttps](INFO): SBD MOMSN=8966120 2018-12-04T21:57:14.394Z,1543960634.394 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T21:57:14.394Z,1543960634.394 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T21:57:14.394Z,1543960634.394 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T21:57:53.784Z,1543960673.784 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T21:58:24.575Z,1543960704.575 [NAL9602](INFO): Powering down 2018-12-04T21:59:12.929Z,1543960752.929 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:59:12.930Z,1543960752.930 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-04T21:59:12.930Z,1543960752.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T21:59:12.932Z,1543960752.932 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T21:59:12.932Z,1543960752.932 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-04T21:59:12.932Z,1543960752.932 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T21:59:12.946Z,1543960752.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T21:59:12.947Z,1543960752.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T21:59:13.350Z,1543960753.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T21:59:13.350Z,1543960753.350 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-04T21:59:13.351Z,1543960753.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T21:59:13.351Z,1543960753.351 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-04T21:59:13.730Z,1543960753.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T21:59:13.730Z,1543960753.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:59:13.731Z,1543960753.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T21:59:13.731Z,1543960753.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T21:59:13.732Z,1543960753.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T21:59:13.732Z,1543960753.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:01:13.966Z,1543960873.966 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:01:13.966Z,1543960873.966 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-04T22:01:13.966Z,1543960873.966 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:01:13.968Z,1543960873.968 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:01:13.968Z,1543960873.968 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-04T22:01:13.968Z,1543960873.968 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:01:14.003Z,1543960874.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:01:14.003Z,1543960874.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:01:14.403Z,1543960874.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:01:14.403Z,1543960874.403 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-04T22:01:14.404Z,1543960874.404 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:01:14.404Z,1543960874.404 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-04T22:01:14.770Z,1543960874.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:01:14.770Z,1543960874.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:01:14.771Z,1543960874.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:01:14.771Z,1543960874.771 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:01:14.771Z,1543960874.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:01:14.772Z,1543960874.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:02:14.714Z,1543960934.714 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T22:02:14.715Z,1543960934.715 [Default:CheckIn:C.Wait] Stopped 2018-12-04T22:02:14.715Z,1543960934.715 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T22:02:14.715Z,1543960934.715 [Default:CheckIn:D] Running Loop=1 2018-12-04T22:02:15.119Z,1543960935.119 [Default:CheckIn:D] Stopped 2018-12-04T22:02:15.119Z,1543960935.119 [Default:CheckIn:E] Running Loop=1 2018-12-04T22:02:15.518Z,1543960935.518 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1487.384896 min 2018-12-04T22:02:15.518Z,1543960935.518 [Default:CheckIn:E] Stopped 2018-12-04T22:02:15.519Z,1543960935.519 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T22:02:15.519Z,1543960935.519 [Default:CheckIn] Stopped 2018-12-04T22:02:15.519Z,1543960935.519 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T22:02:15.519Z,1543960935.519 [Default:CheckIn](INFO): Running loop #145 2018-12-04T22:02:15.519Z,1543960935.519 [Default:CheckIn] Running Loop=145 2018-12-04T22:02:15.519Z,1543960935.519 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T22:02:15.519Z,1543960935.519 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T22:02:16.283Z,1543960936.283 [NAL9602](INFO): Powering up 2018-12-04T22:02:27.483Z,1543960947.483 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:02:59.439Z,1543960979.439 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T22:02:59.514Z,1543960979.514 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T22:02:59.514Z,1543960979.514 [NAL9602] Data Fault, FailCount= 3 2018-12-04T22:02:59.514Z,1543960979.514 [NAL9602](ERROR): Data Fault 2018-12-04T22:02:59.582Z,1543960979.582 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T22:02:59.846Z,1543960979.846 [NAL9602](INFO): Powering down 2018-12-04T22:03:00.680Z,1543960980.680 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T22:03:00.680Z,1543960980.680 [NAL9602] No Fault, FailCount= 3 2018-12-04T22:03:14.814Z,1543960994.814 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:03:14.814Z,1543960994.814 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-04T22:03:14.814Z,1543960994.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:03:14.816Z,1543960994.816 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:03:14.816Z,1543960994.816 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-04T22:03:14.817Z,1543960994.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:03:14.830Z,1543960994.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:03:14.830Z,1543960994.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:03:15.220Z,1543960995.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:03:15.220Z,1543960995.220 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-04T22:03:15.220Z,1543960995.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:03:15.220Z,1543960995.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-04T22:03:15.611Z,1543960995.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:03:15.612Z,1543960995.612 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:03:15.612Z,1543960995.612 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:03:15.612Z,1543960995.612 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:03:15.613Z,1543960995.613 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:03:15.613Z,1543960995.613 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:03:29.981Z,1543961009.981 [NAL9602](INFO): Powering up NAL9602 2018-12-04T22:03:40.783Z,1543961020.783 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:03:41.584Z,1543961021.584 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T22:03:41.584Z,1543961021.584 [NAL9602] Data Fault, FailCount= 4 2018-12-04T22:03:41.584Z,1543961021.584 [NAL9602](ERROR): Data Fault 2018-12-04T22:03:41.657Z,1543961021.657 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T22:03:41.991Z,1543961021.991 [NAL9602](INFO): Powering down 2018-12-04T22:03:45.329Z,1543961025.329 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T22:03:45.329Z,1543961025.329 [NAL9602] No Fault, FailCount= 4 2018-12-04T22:04:12.041Z,1543961052.041 [NAL9602](INFO): Powering up NAL9602 2018-12-04T22:04:23.199Z,1543961063.199 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:05:15.984Z,1543961115.984 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:05:15.984Z,1543961115.984 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-04T22:05:15.984Z,1543961115.984 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:05:15.998Z,1543961115.998 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:05:15.999Z,1543961115.999 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-04T22:05:15.999Z,1543961115.999 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:05:16.020Z,1543961116.020 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:05:16.021Z,1543961116.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:05:16.415Z,1543961116.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:05:16.415Z,1543961116.415 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-04T22:05:16.416Z,1543961116.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:05:16.416Z,1543961116.416 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-04T22:05:16.783Z,1543961116.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:05:16.783Z,1543961116.783 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:05:16.783Z,1543961116.783 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:05:16.784Z,1543961116.784 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:05:16.784Z,1543961116.784 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:05:16.785Z,1543961116.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:06:45.770Z,1543961205.770 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T22:06:45.770Z,1543961205.770 [DropWeight] No Fault, FailCount= 1 2018-12-04T22:07:16.514Z,1543961236.514 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T22:02:15.5Z 2018-12-04T22:07:16.515Z,1543961236.515 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T22:07:16.515Z,1543961236.515 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T22:07:17.433Z,1543961237.433 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:07:17.433Z,1543961237.433 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-04T22:07:17.434Z,1543961237.434 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:07:17.436Z,1543961237.436 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:07:17.436Z,1543961237.436 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-04T22:07:17.436Z,1543961237.436 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:07:17.487Z,1543961237.487 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:07:17.488Z,1543961237.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:07:17.576Z,1543961237.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:07:17.576Z,1543961237.576 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-04T22:07:17.577Z,1543961237.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:07:17.577Z,1543961237.577 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-04T22:07:17.938Z,1543961237.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:07:17.938Z,1543961237.938 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:07:17.939Z,1543961237.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:07:17.939Z,1543961237.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:07:17.940Z,1543961237.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:07:17.940Z,1543961237.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:07:21.742Z,1543961241.742 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0432.lzma 2018-12-04T22:07:22.445Z,1543961242.445 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0432.lzma.bak 2018-12-04T22:07:22.445Z,1543961242.445 [DataOverHttps](INFO): SBD MOMSN=8966143 2018-12-04T22:07:31.979Z,1543961251.979 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T22:07:32.065Z,1543961252.065 [DataOverHttps](INFO): Sending 346 bytes from file Logs/20181203T211451/Express0433.lzma 2018-12-04T22:07:32.853Z,1543961252.853 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0433.lzma.bak 2018-12-04T22:07:32.853Z,1543961252.853 [DataOverHttps](INFO): SBD MOMSN=8966145 2018-12-04T22:07:34.192Z,1543961254.192 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T22:07:34.192Z,1543961254.192 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T22:07:34.192Z,1543961254.192 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T22:08:02.184Z,1543961282.184 [NAL9602](INFO): Powering down 2018-12-04T22:09:18.293Z,1543961358.293 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:09:18.293Z,1543961358.293 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-04T22:09:18.293Z,1543961358.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:09:18.295Z,1543961358.295 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:09:18.295Z,1543961358.295 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-04T22:09:18.295Z,1543961358.295 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:09:18.309Z,1543961358.309 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:09:18.310Z,1543961358.310 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:09:18.716Z,1543961358.716 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:09:18.716Z,1543961358.716 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-04T22:09:18.717Z,1543961358.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:09:18.717Z,1543961358.717 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-04T22:09:19.075Z,1543961359.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:09:19.076Z,1543961359.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:09:19.076Z,1543961359.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:09:19.077Z,1543961359.077 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:09:19.077Z,1543961359.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:09:19.077Z,1543961359.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:11:19.446Z,1543961479.446 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:11:19.446Z,1543961479.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-04T22:11:19.446Z,1543961479.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:11:19.449Z,1543961479.449 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:11:19.449Z,1543961479.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-04T22:11:19.449Z,1543961479.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:11:19.462Z,1543961479.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:11:19.463Z,1543961479.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:11:19.858Z,1543961479.858 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:11:19.858Z,1543961479.858 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-04T22:11:19.859Z,1543961479.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:11:19.859Z,1543961479.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-04T22:11:20.239Z,1543961480.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:11:20.239Z,1543961480.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:11:20.240Z,1543961480.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:11:20.240Z,1543961480.240 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:11:20.240Z,1543961480.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:11:20.241Z,1543961480.241 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:12:34.353Z,1543961554.353 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T22:12:34.353Z,1543961554.353 [Default:CheckIn:C.Wait] Stopped 2018-12-04T22:12:34.353Z,1543961554.353 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T22:12:34.353Z,1543961554.353 [Default:CheckIn:D] Running Loop=1 2018-12-04T22:12:34.758Z,1543961554.758 [Default:CheckIn:D] Stopped 2018-12-04T22:12:34.758Z,1543961554.758 [Default:CheckIn:E] Running Loop=1 2018-12-04T22:12:35.153Z,1543961555.153 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1497.712240 min 2018-12-04T22:12:35.154Z,1543961555.154 [Default:CheckIn:E] Stopped 2018-12-04T22:12:35.154Z,1543961555.154 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T22:12:35.154Z,1543961555.154 [Default:CheckIn] Stopped 2018-12-04T22:12:35.154Z,1543961555.154 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T22:12:35.154Z,1543961555.154 [Default:CheckIn](INFO): Running loop #146 2018-12-04T22:12:35.154Z,1543961555.154 [Default:CheckIn] Running Loop=146 2018-12-04T22:12:35.154Z,1543961555.154 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T22:12:35.155Z,1543961555.155 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T22:12:35.935Z,1543961555.935 [NAL9602](INFO): Powering up 2018-12-04T22:12:47.128Z,1543961567.128 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:13:18.748Z,1543961598.748 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T22:13:18.826Z,1543961598.826 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T22:13:18.826Z,1543961598.826 [NAL9602] Data Fault, FailCount= 5 2018-12-04T22:13:18.826Z,1543961598.826 [NAL9602](ERROR): Data Fault 2018-12-04T22:13:18.886Z,1543961598.886 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T22:13:18.891Z,1543961598.891 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T22:13:19.148Z,1543961599.148 [NAL9602](INFO): Powering down 2018-12-04T22:13:19.190Z,1543961599.190 [CBIT](INFO): Critical error at 20181204T221318 2018-12-04T22:13:20.378Z,1543961600.378 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:13:20.378Z,1543961600.378 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-04T22:13:20.378Z,1543961600.378 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:13:20.380Z,1543961600.380 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:13:20.381Z,1543961600.381 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-04T22:13:20.381Z,1543961600.381 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:13:20.396Z,1543961600.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:13:20.396Z,1543961600.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:13:20.792Z,1543961600.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:13:20.792Z,1543961600.792 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-04T22:13:20.792Z,1543961600.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:13:20.793Z,1543961600.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-04T22:13:21.171Z,1543961601.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:13:21.172Z,1543961601.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:13:21.172Z,1543961601.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:13:21.173Z,1543961601.173 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:13:21.173Z,1543961601.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:13:21.173Z,1543961601.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:15:19.099Z,1543961719.099 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T22:15:19.099Z,1543961719.099 [NAL9602] No Fault, FailCount= 5 2018-12-04T22:15:19.464Z,1543961719.464 [NAL9602](INFO): Powering up NAL9602 2018-12-04T22:15:21.494Z,1543961721.494 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:15:21.494Z,1543961721.494 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-04T22:15:21.495Z,1543961721.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:15:21.497Z,1543961721.497 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:15:21.497Z,1543961721.497 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-04T22:15:21.497Z,1543961721.497 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:15:21.510Z,1543961721.510 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:15:21.510Z,1543961721.510 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:15:21.907Z,1543961721.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:15:21.907Z,1543961721.907 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-04T22:15:21.907Z,1543961721.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:15:21.907Z,1543961721.907 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-04T22:15:22.293Z,1543961722.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:15:22.294Z,1543961722.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:15:22.294Z,1543961722.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:15:22.295Z,1543961722.295 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:15:22.295Z,1543961722.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:15:22.295Z,1543961722.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:15:30.664Z,1543961730.664 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:15:31.462Z,1543961731.462 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T22:15:31.462Z,1543961731.462 [NAL9602] Data Fault, FailCount= 1 2018-12-04T22:15:31.462Z,1543961731.462 [NAL9602](ERROR): Data Fault 2018-12-04T22:15:31.523Z,1543961731.523 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T22:15:31.864Z,1543961731.864 [NAL9602](INFO): Powering down 2018-12-04T22:15:32.709Z,1543961732.709 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T22:15:32.709Z,1543961732.709 [NAL9602] No Fault, FailCount= 1 2018-12-04T22:16:01.884Z,1543961761.884 [NAL9602](INFO): Powering up NAL9602 2018-12-04T22:16:13.088Z,1543961773.088 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:17:22.662Z,1543961842.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:17:22.662Z,1543961842.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-04T22:17:22.663Z,1543961842.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:17:22.665Z,1543961842.665 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:17:22.665Z,1543961842.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-04T22:17:22.665Z,1543961842.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:17:22.711Z,1543961842.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:17:22.711Z,1543961842.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:17:23.078Z,1543961843.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:17:23.078Z,1543961843.078 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-04T22:17:23.111Z,1543961843.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:17:23.111Z,1543961843.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-04T22:17:23.478Z,1543961843.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:17:23.495Z,1543961843.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:17:23.495Z,1543961843.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:17:23.496Z,1543961843.496 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:17:23.496Z,1543961843.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:17:23.496Z,1543961843.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:17:36.214Z,1543961856.214 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T22:12:35.2Z 2018-12-04T22:17:36.214Z,1543961856.214 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T22:17:36.215Z,1543961856.215 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T22:17:41.233Z,1543961861.233 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0435.lzma 2018-12-04T22:17:42.033Z,1543961862.033 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0435.lzma.bak 2018-12-04T22:17:42.033Z,1543961862.033 [DataOverHttps](INFO): SBD MOMSN=8966170 2018-12-04T22:17:51.436Z,1543961871.436 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T22:17:51.512Z,1543961871.512 [DataOverHttps](INFO): Sending 354 bytes from file Logs/20181203T211451/Express0436.lzma 2018-12-04T22:17:52.293Z,1543961872.293 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0436.lzma.bak 2018-12-04T22:17:52.293Z,1543961872.293 [DataOverHttps](INFO): SBD MOMSN=8966173 2018-12-04T22:17:53.653Z,1543961873.653 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T22:17:53.653Z,1543961873.653 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T22:17:53.654Z,1543961873.654 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T22:18:21.716Z,1543961901.716 [NAL9602](INFO): Powering down 2018-12-04T22:19:23.719Z,1543961963.719 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:19:23.719Z,1543961963.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-04T22:19:23.719Z,1543961963.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:19:23.721Z,1543961963.721 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:19:23.721Z,1543961963.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-04T22:19:23.722Z,1543961963.722 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:19:23.735Z,1543961963.735 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:19:23.735Z,1543961963.735 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:19:24.132Z,1543961964.132 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:19:24.132Z,1543961964.132 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-04T22:19:24.133Z,1543961964.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:19:24.133Z,1543961964.133 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-04T22:19:24.524Z,1543961964.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:19:24.525Z,1543961964.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:19:24.525Z,1543961964.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:19:24.526Z,1543961964.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:19:24.526Z,1543961964.526 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:19:24.527Z,1543961964.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:21:24.606Z,1543962084.606 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:21:24.606Z,1543962084.606 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-04T22:21:24.607Z,1543962084.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:21:24.609Z,1543962084.609 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:21:24.609Z,1543962084.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-04T22:21:24.609Z,1543962084.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:21:24.646Z,1543962084.646 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:21:24.647Z,1543962084.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:21:25.015Z,1543962085.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:21:25.015Z,1543962085.015 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-04T22:21:25.015Z,1543962085.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:21:25.015Z,1543962085.015 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-04T22:21:25.386Z,1543962085.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:21:25.386Z,1543962085.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:21:25.387Z,1543962085.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:21:25.387Z,1543962085.387 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:21:25.387Z,1543962085.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:21:25.388Z,1543962085.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:22:53.794Z,1543962173.794 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T22:22:53.794Z,1543962173.794 [Default:CheckIn:C.Wait] Stopped 2018-12-04T22:22:53.794Z,1543962173.794 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T22:22:53.794Z,1543962173.794 [Default:CheckIn:D] Running Loop=1 2018-12-04T22:22:54.186Z,1543962174.186 [Default:CheckIn:D] Stopped 2018-12-04T22:22:54.186Z,1543962174.186 [Default:CheckIn:E] Running Loop=1 2018-12-04T22:22:54.590Z,1543962174.590 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1508.036068 min 2018-12-04T22:22:54.591Z,1543962174.591 [Default:CheckIn:E] Stopped 2018-12-04T22:22:54.591Z,1543962174.591 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T22:22:54.591Z,1543962174.591 [Default:CheckIn] Stopped 2018-12-04T22:22:54.591Z,1543962174.591 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T22:22:54.591Z,1543962174.591 [Default:CheckIn](INFO): Running loop #147 2018-12-04T22:22:54.591Z,1543962174.591 [Default:CheckIn] Running Loop=147 2018-12-04T22:22:54.591Z,1543962174.591 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T22:22:54.591Z,1543962174.591 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T22:22:55.355Z,1543962175.355 [NAL9602](INFO): Powering up 2018-12-04T22:23:06.556Z,1543962186.556 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:23:25.494Z,1543962205.494 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:23:25.494Z,1543962205.494 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-04T22:23:25.494Z,1543962205.494 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:23:25.496Z,1543962205.496 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:23:25.496Z,1543962205.496 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-04T22:23:25.497Z,1543962205.497 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:23:25.510Z,1543962205.510 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:23:25.510Z,1543962205.510 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:23:25.906Z,1543962205.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:23:25.906Z,1543962205.906 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-04T22:23:25.907Z,1543962205.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:23:25.907Z,1543962205.907 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-04T22:23:26.289Z,1543962206.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:23:26.289Z,1543962206.289 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:23:26.290Z,1543962206.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:23:26.290Z,1543962206.290 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:23:26.291Z,1543962206.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:23:26.291Z,1543962206.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:23:38.264Z,1543962218.264 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T22:23:38.346Z,1543962218.346 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T22:23:38.346Z,1543962218.346 [NAL9602] Data Fault, FailCount= 2 2018-12-04T22:23:38.346Z,1543962218.346 [NAL9602](ERROR): Data Fault 2018-12-04T22:23:38.405Z,1543962218.405 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T22:23:38.664Z,1543962218.664 [NAL9602](INFO): Powering down 2018-12-04T22:23:39.513Z,1543962219.513 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T22:23:39.513Z,1543962219.513 [NAL9602] No Fault, FailCount= 2 2018-12-04T22:24:09.028Z,1543962249.028 [NAL9602](INFO): Powering up NAL9602 2018-12-04T22:24:20.228Z,1543962260.228 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:25:26.494Z,1543962326.494 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:25:26.495Z,1543962326.495 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-04T22:25:26.495Z,1543962326.495 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:25:26.497Z,1543962326.497 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:25:26.497Z,1543962326.497 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-04T22:25:26.497Z,1543962326.497 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:25:26.527Z,1543962326.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:25:26.527Z,1543962326.527 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:25:26.902Z,1543962326.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:25:26.902Z,1543962326.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-04T22:25:26.903Z,1543962326.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:25:26.903Z,1543962326.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-04T22:25:27.290Z,1543962327.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:25:27.290Z,1543962327.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:25:27.291Z,1543962327.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:25:27.291Z,1543962327.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:25:27.291Z,1543962327.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:25:27.292Z,1543962327.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:27:27.360Z,1543962447.360 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:27:27.360Z,1543962447.360 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-04T22:27:27.360Z,1543962447.360 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:27:27.362Z,1543962447.362 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:27:27.362Z,1543962447.362 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-04T22:27:27.362Z,1543962447.362 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:27:27.376Z,1543962447.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:27:27.376Z,1543962447.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:27:27.781Z,1543962447.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:27:27.782Z,1543962447.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-04T22:27:27.782Z,1543962447.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:27:27.782Z,1543962447.782 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-04T22:27:28.172Z,1543962448.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:27:28.172Z,1543962448.172 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:27:28.173Z,1543962448.173 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:27:28.173Z,1543962448.173 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:27:28.174Z,1543962448.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:27:28.174Z,1543962448.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:27:56.127Z,1543962476.127 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T22:22:54.6Z 2018-12-04T22:27:56.127Z,1543962476.127 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T22:27:56.127Z,1543962476.127 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T22:28:01.122Z,1543962481.122 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0438.lzma 2018-12-04T22:28:01.908Z,1543962481.908 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0438.lzma.bak 2018-12-04T22:28:01.908Z,1543962481.908 [DataOverHttps](INFO): SBD MOMSN=8966198 2018-12-04T22:28:11.312Z,1543962491.312 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T22:28:11.357Z,1543962491.357 [DataOverHttps](INFO): Sending 323 bytes from file Logs/20181203T211451/Express0439.lzma 2018-12-04T22:28:12.157Z,1543962492.157 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0439.lzma.bak 2018-12-04T22:28:12.157Z,1543962492.157 [DataOverHttps](INFO): SBD MOMSN=8966200 2018-12-04T22:28:13.675Z,1543962493.675 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T22:28:13.675Z,1543962493.675 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T22:28:13.675Z,1543962493.675 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T22:28:41.681Z,1543962521.681 [NAL9602](INFO): Powering down 2018-12-04T22:29:28.411Z,1543962568.411 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:29:28.411Z,1543962568.411 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-04T22:29:28.411Z,1543962568.411 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:29:28.413Z,1543962568.413 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:29:28.413Z,1543962568.413 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-04T22:29:28.413Z,1543962568.413 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:29:28.427Z,1543962568.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:29:28.428Z,1543962568.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:29:28.819Z,1543962568.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:29:28.820Z,1543962568.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-04T22:29:28.820Z,1543962568.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:29:28.820Z,1543962568.820 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-04T22:29:29.209Z,1543962569.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:29:29.209Z,1543962569.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:29:29.209Z,1543962569.209 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:29:29.210Z,1543962569.210 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:29:29.210Z,1543962569.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:29:29.211Z,1543962569.211 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:31:29.490Z,1543962689.490 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:31:29.490Z,1543962689.490 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-04T22:31:29.490Z,1543962689.490 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:31:29.492Z,1543962689.492 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:31:29.492Z,1543962689.492 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-04T22:31:29.493Z,1543962689.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:31:29.506Z,1543962689.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:31:29.506Z,1543962689.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:31:29.902Z,1543962689.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:31:29.902Z,1543962689.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-04T22:31:29.903Z,1543962689.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:31:29.903Z,1543962689.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-04T22:31:30.282Z,1543962690.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:31:30.283Z,1543962690.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:31:30.283Z,1543962690.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:31:30.283Z,1543962690.283 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:31:30.284Z,1543962690.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:31:30.284Z,1543962690.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:33:13.815Z,1543962793.815 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T22:33:13.815Z,1543962793.815 [Default:CheckIn:C.Wait] Stopped 2018-12-04T22:33:13.815Z,1543962793.815 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T22:33:13.815Z,1543962793.815 [Default:CheckIn:D] Running Loop=1 2018-12-04T22:33:14.234Z,1543962794.234 [Default:CheckIn:D] Stopped 2018-12-04T22:33:14.234Z,1543962794.234 [Default:CheckIn:E] Running Loop=1 2018-12-04T22:33:14.617Z,1543962794.617 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1518.370182 min 2018-12-04T22:33:14.617Z,1543962794.617 [Default:CheckIn:E] Stopped 2018-12-04T22:33:14.617Z,1543962794.617 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T22:33:14.617Z,1543962794.617 [Default:CheckIn] Stopped 2018-12-04T22:33:14.618Z,1543962794.618 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T22:33:14.618Z,1543962794.618 [Default:CheckIn](INFO): Running loop #148 2018-12-04T22:33:14.618Z,1543962794.618 [Default:CheckIn] Running Loop=148 2018-12-04T22:33:14.618Z,1543962794.618 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T22:33:14.619Z,1543962794.619 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T22:33:15.388Z,1543962795.388 [NAL9602](INFO): Powering up 2018-12-04T22:33:26.592Z,1543962806.592 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:33:27.388Z,1543962807.388 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T22:33:27.388Z,1543962807.388 [NAL9602] Data Fault, FailCount= 3 2018-12-04T22:33:27.388Z,1543962807.388 [NAL9602](ERROR): Data Fault 2018-12-04T22:33:27.449Z,1543962807.449 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T22:33:27.788Z,1543962807.788 [NAL9602](INFO): Powering down 2018-12-04T22:33:28.629Z,1543962808.629 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T22:33:28.629Z,1543962808.629 [NAL9602] No Fault, FailCount= 3 2018-12-04T22:33:30.638Z,1543962810.638 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:33:30.638Z,1543962810.638 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-04T22:33:30.638Z,1543962810.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:33:30.640Z,1543962810.640 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:33:30.641Z,1543962810.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-04T22:33:30.641Z,1543962810.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:33:30.689Z,1543962810.689 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:33:30.690Z,1543962810.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:33:33.746Z,1543962813.746 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:33:33.746Z,1543962813.746 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-04T22:33:33.747Z,1543962813.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:33:33.747Z,1543962813.747 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-04T22:33:33.835Z,1543962813.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:33:33.836Z,1543962813.836 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:33:33.836Z,1543962813.836 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:33:33.837Z,1543962813.837 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:33:33.837Z,1543962813.837 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:33:33.837Z,1543962813.837 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:33:58.161Z,1543962838.161 [NAL9602](INFO): Powering up NAL9602 2018-12-04T22:34:09.448Z,1543962849.448 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:35:33.838Z,1543962933.838 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:35:33.838Z,1543962933.838 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-04T22:35:33.838Z,1543962933.838 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:35:33.840Z,1543962933.840 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:35:33.840Z,1543962933.840 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-04T22:35:33.840Z,1543962933.840 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:35:33.854Z,1543962933.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:35:33.854Z,1543962933.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:35:34.248Z,1543962934.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:35:34.248Z,1543962934.248 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-04T22:35:34.249Z,1543962934.249 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:35:34.249Z,1543962934.249 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-04T22:35:34.623Z,1543962934.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:35:34.624Z,1543962934.624 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:35:34.624Z,1543962934.624 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:35:34.625Z,1543962934.625 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:35:34.625Z,1543962934.625 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:35:34.625Z,1543962934.625 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:36:47.115Z,1543963007.115 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T22:36:47.115Z,1543963007.115 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T22:36:47.115Z,1543963007.115 [DropWeight](ERROR): Hardware Fault 2018-12-04T22:36:47.179Z,1543963007.179 [CBIT](INFO): Critical error at 20181204T223647 2018-12-04T22:36:47.181Z,1543963007.181 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T22:36:47.181Z,1543963007.181 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T22:36:47.563Z,1543963007.563 [CBIT](INFO): Critical error at 20181204T223647 2018-12-04T22:37:34.851Z,1543963054.851 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:37:34.851Z,1543963054.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-04T22:37:34.851Z,1543963054.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:37:34.853Z,1543963054.853 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:37:34.853Z,1543963054.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-04T22:37:34.853Z,1543963054.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:37:34.913Z,1543963054.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:37:34.914Z,1543963054.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:37:35.262Z,1543963055.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:37:35.262Z,1543963055.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-04T22:37:35.263Z,1543963055.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:37:35.263Z,1543963055.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-04T22:37:35.654Z,1543963055.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:37:35.654Z,1543963055.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:37:35.655Z,1543963055.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:37:35.655Z,1543963055.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:37:35.655Z,1543963055.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:37:35.656Z,1543963055.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:38:15.667Z,1543963095.667 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T22:33:14.6Z 2018-12-04T22:38:15.667Z,1543963095.667 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T22:38:15.667Z,1543963095.667 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T22:38:20.552Z,1543963100.552 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0441.lzma 2018-12-04T22:38:21.353Z,1543963101.353 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0441.lzma.bak 2018-12-04T22:38:21.353Z,1543963101.353 [DataOverHttps](INFO): SBD MOMSN=8966223 2018-12-04T22:38:30.764Z,1543963110.764 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0442.lzma 2018-12-04T22:38:31.533Z,1543963111.533 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0442.lzma.bak 2018-12-04T22:38:31.533Z,1543963111.533 [DataOverHttps](INFO): SBD MOMSN=8966227 2018-12-04T22:38:32.874Z,1543963112.874 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T22:38:32.874Z,1543963112.874 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T22:38:32.874Z,1543963112.874 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T22:39:12.625Z,1543963152.625 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T22:39:35.840Z,1543963175.840 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:39:35.840Z,1543963175.840 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-04T22:39:35.840Z,1543963175.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:39:35.842Z,1543963175.842 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:39:35.842Z,1543963175.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-04T22:39:35.842Z,1543963175.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:39:35.855Z,1543963175.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:39:35.856Z,1543963175.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:39:36.262Z,1543963176.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:39:36.262Z,1543963176.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-04T22:39:36.295Z,1543963176.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:39:36.295Z,1543963176.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-04T22:39:36.641Z,1543963176.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:39:36.642Z,1543963176.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:39:36.642Z,1543963176.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:39:36.643Z,1543963176.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:39:36.643Z,1543963176.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:39:36.643Z,1543963176.643 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:39:43.031Z,1543963183.031 [NAL9602](INFO): Powering down 2018-12-04T22:41:37.022Z,1543963297.022 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:41:37.022Z,1543963297.022 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-04T22:41:37.022Z,1543963297.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:41:37.024Z,1543963297.024 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:41:37.024Z,1543963297.024 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-04T22:41:37.025Z,1543963297.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:41:37.038Z,1543963297.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:41:37.038Z,1543963297.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:41:37.434Z,1543963297.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:41:37.434Z,1543963297.434 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-04T22:41:37.435Z,1543963297.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:41:37.435Z,1543963297.435 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-04T22:41:37.817Z,1543963297.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:41:37.818Z,1543963297.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:41:37.818Z,1543963297.818 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:41:37.819Z,1543963297.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:41:37.819Z,1543963297.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:41:37.819Z,1543963297.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:43:33.251Z,1543963413.251 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T22:43:33.251Z,1543963413.251 [Default:CheckIn:C.Wait] Stopped 2018-12-04T22:43:33.251Z,1543963413.251 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T22:43:33.251Z,1543963413.251 [Default:CheckIn:D] Running Loop=1 2018-12-04T22:43:33.647Z,1543963413.647 [Default:CheckIn:D] Stopped 2018-12-04T22:43:33.647Z,1543963413.647 [Default:CheckIn:E] Running Loop=1 2018-12-04T22:43:34.054Z,1543963414.054 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1528.693750 min 2018-12-04T22:43:34.054Z,1543963414.054 [Default:CheckIn:E] Stopped 2018-12-04T22:43:34.054Z,1543963414.054 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T22:43:34.055Z,1543963414.055 [Default:CheckIn] Stopped 2018-12-04T22:43:34.055Z,1543963414.055 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T22:43:34.055Z,1543963414.055 [Default:CheckIn](INFO): Running loop #149 2018-12-04T22:43:34.055Z,1543963414.055 [Default:CheckIn] Running Loop=149 2018-12-04T22:43:34.055Z,1543963414.055 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T22:43:34.055Z,1543963414.055 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T22:43:34.820Z,1543963414.820 [NAL9602](INFO): Powering up 2018-12-04T22:43:38.048Z,1543963418.048 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:43:38.048Z,1543963418.048 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-04T22:43:38.048Z,1543963418.048 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:43:38.050Z,1543963418.050 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:43:38.050Z,1543963418.050 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-04T22:43:38.050Z,1543963418.050 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:43:38.064Z,1543963418.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:43:38.064Z,1543963418.064 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:43:38.456Z,1543963418.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:43:38.456Z,1543963418.456 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-04T22:43:38.457Z,1543963418.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:43:38.457Z,1543963418.457 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-04T22:43:38.850Z,1543963418.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:43:38.850Z,1543963418.850 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:43:38.851Z,1543963418.851 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:43:38.851Z,1543963418.851 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:43:38.851Z,1543963418.851 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:43:38.852Z,1543963418.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:43:46.020Z,1543963426.020 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:45:39.230Z,1543963539.230 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:45:39.231Z,1543963539.231 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-04T22:45:39.231Z,1543963539.231 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:45:39.233Z,1543963539.233 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:45:39.233Z,1543963539.233 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-04T22:45:39.233Z,1543963539.233 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:45:39.247Z,1543963539.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:45:39.248Z,1543963539.248 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:45:39.379Z,1543963539.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:45:39.379Z,1543963539.379 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-04T22:45:39.380Z,1543963539.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:45:39.380Z,1543963539.380 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-04T22:45:39.706Z,1543963539.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:45:39.706Z,1543963539.706 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:45:39.707Z,1543963539.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:45:39.707Z,1543963539.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:45:39.707Z,1543963539.707 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:45:39.708Z,1543963539.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:47:39.794Z,1543963659.794 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:47:39.794Z,1543963659.794 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-04T22:47:39.794Z,1543963659.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:47:39.796Z,1543963659.796 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:47:39.796Z,1543963659.796 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-04T22:47:39.796Z,1543963659.796 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:47:39.810Z,1543963659.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:47:39.810Z,1543963659.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:47:40.206Z,1543963660.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:47:40.206Z,1543963660.206 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-04T22:47:40.207Z,1543963660.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:47:40.207Z,1543963660.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-04T22:47:40.593Z,1543963660.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:47:40.594Z,1543963660.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:47:40.594Z,1543963660.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:47:40.595Z,1543963660.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:47:40.595Z,1543963660.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:47:40.595Z,1543963660.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:48:35.263Z,1543963715.263 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T22:43:34.1Z 2018-12-04T22:48:35.263Z,1543963715.263 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T22:48:35.263Z,1543963715.263 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T22:48:40.233Z,1543963720.233 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0444.lzma 2018-12-04T22:48:41.025Z,1543963721.025 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0444.lzma.bak 2018-12-04T22:48:41.025Z,1543963721.025 [DataOverHttps](INFO): SBD MOMSN=8966251 2018-12-04T22:48:50.356Z,1543963730.356 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T22:48:50.433Z,1543963730.433 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0445.lzma 2018-12-04T22:48:51.205Z,1543963731.205 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0445.lzma.bak 2018-12-04T22:48:51.205Z,1543963731.205 [DataOverHttps](INFO): SBD MOMSN=8966253 2018-12-04T22:48:52.537Z,1543963732.537 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T22:48:52.538Z,1543963732.538 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T22:48:52.538Z,1543963732.538 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T22:49:20.707Z,1543963760.707 [NAL9602](INFO): Powering down 2018-12-04T22:49:40.752Z,1543963780.752 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:49:40.752Z,1543963780.752 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-04T22:49:40.752Z,1543963780.752 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:49:40.754Z,1543963780.754 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:49:40.755Z,1543963780.755 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-04T22:49:40.755Z,1543963780.755 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:49:40.769Z,1543963780.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:49:40.769Z,1543963780.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:49:41.169Z,1543963781.169 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:49:41.169Z,1543963781.169 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-04T22:49:41.170Z,1543963781.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:49:41.170Z,1543963781.170 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-04T22:49:41.555Z,1543963781.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:49:41.555Z,1543963781.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:49:41.555Z,1543963781.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:49:41.556Z,1543963781.556 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:49:41.556Z,1543963781.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:49:41.556Z,1543963781.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:51:41.575Z,1543963901.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:51:41.575Z,1543963901.575 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-04T22:51:41.575Z,1543963901.575 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:51:41.577Z,1543963901.577 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:51:41.577Z,1543963901.577 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-04T22:51:41.577Z,1543963901.577 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:51:41.591Z,1543963901.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:51:41.591Z,1543963901.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:51:41.985Z,1543963901.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:51:41.985Z,1543963901.985 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-04T22:51:41.985Z,1543963901.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:51:41.985Z,1543963901.985 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-04T22:51:42.378Z,1543963902.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:51:42.378Z,1543963902.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:51:42.379Z,1543963902.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:51:42.379Z,1543963902.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:51:42.379Z,1543963902.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:51:42.380Z,1543963902.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:51:47.188Z,1543963907.188 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T22:51:47.188Z,1543963907.188 [DropWeight] No Fault, FailCount= 1 2018-12-04T22:53:42.686Z,1543964022.686 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:53:42.686Z,1543964022.686 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-04T22:53:42.686Z,1543964022.686 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:53:42.688Z,1543964022.688 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:53:42.688Z,1543964022.688 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-04T22:53:42.689Z,1543964022.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:53:42.703Z,1543964022.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:53:42.703Z,1543964022.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:53:43.102Z,1543964023.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:53:43.102Z,1543964023.102 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-04T22:53:43.103Z,1543964023.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:53:43.103Z,1543964023.103 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-04T22:53:43.490Z,1543964023.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:53:43.490Z,1543964023.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:53:43.491Z,1543964023.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:53:43.491Z,1543964023.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:53:43.491Z,1543964023.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:53:43.492Z,1543964023.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:53:52.693Z,1543964032.693 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T22:53:52.694Z,1543964032.694 [Default:CheckIn:C.Wait] Stopped 2018-12-04T22:53:52.694Z,1543964032.694 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T22:53:52.694Z,1543964032.694 [Default:CheckIn:D] Running Loop=1 2018-12-04T22:53:53.094Z,1543964033.094 [Default:CheckIn:D] Stopped 2018-12-04T22:53:53.094Z,1543964033.094 [Default:CheckIn:E] Running Loop=1 2018-12-04T22:53:53.494Z,1543964033.494 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1539.017839 min 2018-12-04T22:53:53.494Z,1543964033.494 [Default:CheckIn:E] Stopped 2018-12-04T22:53:53.494Z,1543964033.494 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T22:53:53.494Z,1543964033.494 [Default:CheckIn] Stopped 2018-12-04T22:53:53.495Z,1543964033.495 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T22:53:53.495Z,1543964033.495 [Default:CheckIn](INFO): Running loop #150 2018-12-04T22:53:53.495Z,1543964033.495 [Default:CheckIn] Running Loop=150 2018-12-04T22:53:53.495Z,1543964033.495 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T22:53:53.495Z,1543964033.495 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T22:53:54.259Z,1543964034.259 [NAL9602](INFO): Powering up 2018-12-04T22:54:05.460Z,1543964045.460 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:54:06.260Z,1543964046.260 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T22:54:06.260Z,1543964046.260 [NAL9602] Data Fault, FailCount= 4 2018-12-04T22:54:06.260Z,1543964046.260 [NAL9602](ERROR): Data Fault 2018-12-04T22:54:06.314Z,1543964046.314 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T22:54:06.660Z,1543964046.660 [NAL9602](INFO): Powering down 2018-12-04T22:54:07.501Z,1543964047.501 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T22:54:07.501Z,1543964047.501 [NAL9602] No Fault, FailCount= 4 2018-12-04T22:54:36.682Z,1543964076.682 [NAL9602](INFO): Powering up NAL9602 2018-12-04T22:54:48.664Z,1543964088.664 [NAL9602](INFO): NAL9602 initialized 2018-12-04T22:55:43.535Z,1543964143.535 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:55:43.535Z,1543964143.535 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-04T22:55:43.536Z,1543964143.536 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:55:43.538Z,1543964143.538 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:55:43.538Z,1543964143.538 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-04T22:55:43.538Z,1543964143.538 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:55:43.551Z,1543964143.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:55:43.551Z,1543964143.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:55:43.963Z,1543964143.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:55:43.963Z,1543964143.963 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-04T22:55:43.963Z,1543964143.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:55:43.963Z,1543964143.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-04T22:55:44.350Z,1543964144.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:55:44.350Z,1543964144.350 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:55:44.351Z,1543964144.351 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:55:44.351Z,1543964144.351 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:55:44.352Z,1543964144.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:55:44.352Z,1543964144.352 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:57:44.387Z,1543964264.387 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:57:44.387Z,1543964264.387 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-04T22:57:44.387Z,1543964264.387 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:57:44.389Z,1543964264.389 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:57:44.389Z,1543964264.389 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-04T22:57:44.389Z,1543964264.389 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:57:44.403Z,1543964264.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:57:44.403Z,1543964264.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:57:44.767Z,1543964264.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:57:44.767Z,1543964264.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-04T22:57:44.767Z,1543964264.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:57:44.767Z,1543964264.767 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-04T22:57:45.162Z,1543964265.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:57:45.162Z,1543964265.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:57:45.163Z,1543964265.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:57:45.163Z,1543964265.163 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:57:45.163Z,1543964265.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:57:45.164Z,1543964265.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:58:54.788Z,1543964334.788 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T22:53:53.5Z 2018-12-04T22:58:54.788Z,1543964334.788 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T22:58:54.788Z,1543964334.788 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T22:58:59.801Z,1543964339.801 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0447.lzma 2018-12-04T22:59:00.601Z,1543964340.601 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0447.lzma.bak 2018-12-04T22:59:00.601Z,1543964340.601 [DataOverHttps](INFO): SBD MOMSN=8966274 2018-12-04T22:59:10.265Z,1543964350.265 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0448.lzma 2018-12-04T22:59:11.061Z,1543964351.061 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0448.lzma.bak 2018-12-04T22:59:11.061Z,1543964351.061 [DataOverHttps](INFO): SBD MOMSN=8966276 2018-12-04T22:59:12.407Z,1543964352.407 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T22:59:12.407Z,1543964352.407 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T22:59:12.407Z,1543964352.407 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T22:59:45.308Z,1543964385.308 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:59:45.308Z,1543964385.308 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-04T22:59:45.308Z,1543964385.308 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T22:59:45.310Z,1543964385.310 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T22:59:45.314Z,1543964385.314 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-04T22:59:45.314Z,1543964385.314 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T22:59:45.336Z,1543964385.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T22:59:45.337Z,1543964385.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T22:59:45.722Z,1543964385.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T22:59:45.722Z,1543964385.722 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-04T22:59:45.723Z,1543964385.723 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T22:59:45.723Z,1543964385.723 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-04T22:59:46.111Z,1543964386.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T22:59:46.112Z,1543964386.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:59:46.112Z,1543964386.112 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:59:46.112Z,1543964386.112 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T22:59:46.113Z,1543964386.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T22:59:46.113Z,1543964386.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T22:59:52.204Z,1543964392.204 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T23:00:22.996Z,1543964422.996 [NAL9602](INFO): Powering down 2018-12-04T23:01:46.380Z,1543964506.380 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:01:46.380Z,1543964506.380 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-04T23:01:46.380Z,1543964506.380 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:01:46.383Z,1543964506.383 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:01:46.383Z,1543964506.383 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-04T23:01:46.383Z,1543964506.383 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:01:46.396Z,1543964506.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:01:46.397Z,1543964506.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:01:46.802Z,1543964506.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:01:46.802Z,1543964506.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-04T23:01:46.802Z,1543964506.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:01:46.803Z,1543964506.803 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-04T23:01:47.194Z,1543964507.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:01:47.194Z,1543964507.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:01:47.195Z,1543964507.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:01:47.195Z,1543964507.195 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:01:47.196Z,1543964507.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:01:47.196Z,1543964507.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:03:19.735Z,1543964599.735 [BPC1](INFO): Calculating totals. Valid battery stick count: 54. Valid reserve battery stick count: 6. 2018-12-04T23:03:47.293Z,1543964627.293 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:03:47.293Z,1543964627.293 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-04T23:03:47.293Z,1543964627.293 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:03:47.295Z,1543964627.295 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:03:47.295Z,1543964627.295 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-04T23:03:47.296Z,1543964627.296 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:03:47.309Z,1543964627.309 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:03:47.309Z,1543964627.309 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:03:47.706Z,1543964627.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:03:47.706Z,1543964627.706 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-04T23:03:47.707Z,1543964627.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:03:47.707Z,1543964627.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-04T23:03:48.102Z,1543964628.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:03:48.102Z,1543964628.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:03:48.103Z,1543964628.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:03:48.103Z,1543964628.103 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:03:48.103Z,1543964628.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:03:48.104Z,1543964628.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:04:12.618Z,1543964652.618 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T23:04:12.618Z,1543964652.618 [Default:CheckIn:C.Wait] Stopped 2018-12-04T23:04:12.619Z,1543964652.619 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T23:04:12.619Z,1543964652.619 [Default:CheckIn:D] Running Loop=1 2018-12-04T23:04:12.994Z,1543964652.994 [Default:CheckIn:D] Stopped 2018-12-04T23:04:13.006Z,1543964653.006 [Default:CheckIn:E] Running Loop=1 2018-12-04T23:04:13.413Z,1543964653.413 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1549.349479 min 2018-12-04T23:04:13.414Z,1543964653.414 [Default:CheckIn:E] Stopped 2018-12-04T23:04:13.414Z,1543964653.414 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T23:04:13.414Z,1543964653.414 [Default:CheckIn] Stopped 2018-12-04T23:04:13.414Z,1543964653.414 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T23:04:13.415Z,1543964653.415 [Default:CheckIn](INFO): Running loop #151 2018-12-04T23:04:13.415Z,1543964653.415 [Default:CheckIn] Running Loop=151 2018-12-04T23:04:13.415Z,1543964653.415 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T23:04:13.415Z,1543964653.415 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T23:04:14.187Z,1543964654.187 [NAL9602](INFO): Powering up 2018-12-04T23:04:25.400Z,1543964665.400 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:04:57.040Z,1543964697.040 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T23:04:57.114Z,1543964697.114 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T23:04:57.114Z,1543964697.114 [NAL9602] Data Fault, FailCount= 5 2018-12-04T23:04:57.114Z,1543964697.114 [NAL9602](ERROR): Data Fault 2018-12-04T23:04:57.189Z,1543964697.189 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T23:04:57.189Z,1543964697.189 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T23:04:57.440Z,1543964697.440 [NAL9602](INFO): Powering down 2018-12-04T23:04:57.494Z,1543964697.494 [CBIT](INFO): Critical error at 20181204T230457 2018-12-04T23:05:48.194Z,1543964748.194 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:05:48.194Z,1543964748.194 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-04T23:05:48.194Z,1543964748.194 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:05:48.196Z,1543964748.196 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:05:48.196Z,1543964748.196 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-04T23:05:48.196Z,1543964748.196 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:05:48.210Z,1543964748.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:05:48.210Z,1543964748.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:05:48.597Z,1543964748.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:05:48.597Z,1543964748.597 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-04T23:05:48.598Z,1543964748.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:05:48.598Z,1543964748.598 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-04T23:05:48.986Z,1543964748.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:05:48.986Z,1543964748.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:05:48.986Z,1543964748.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:05:48.987Z,1543964748.987 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:05:48.987Z,1543964748.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:05:48.988Z,1543964748.988 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:06:57.115Z,1543964817.115 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T23:06:57.115Z,1543964817.115 [NAL9602] No Fault, FailCount= 5 2018-12-04T23:06:57.472Z,1543964817.472 [NAL9602](INFO): Powering up NAL9602 2018-12-04T23:07:08.672Z,1543964828.672 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:07:09.472Z,1543964829.472 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T23:07:09.472Z,1543964829.472 [NAL9602] Data Fault, FailCount= 1 2018-12-04T23:07:09.472Z,1543964829.472 [NAL9602](ERROR): Data Fault 2018-12-04T23:07:09.535Z,1543964829.535 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T23:07:09.872Z,1543964829.872 [NAL9602](INFO): Powering down 2018-12-04T23:07:10.716Z,1543964830.716 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T23:07:10.716Z,1543964830.716 [NAL9602] No Fault, FailCount= 1 2018-12-04T23:07:39.888Z,1543964859.888 [NAL9602](INFO): Powering up NAL9602 2018-12-04T23:07:49.113Z,1543964869.113 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:07:49.113Z,1543964869.113 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-04T23:07:49.113Z,1543964869.113 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:07:49.116Z,1543964869.116 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:07:49.116Z,1543964869.116 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-04T23:07:49.116Z,1543964869.116 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:07:49.129Z,1543964869.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:07:49.129Z,1543964869.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:07:49.530Z,1543964869.530 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:07:49.530Z,1543964869.530 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-04T23:07:49.531Z,1543964869.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:07:49.531Z,1543964869.531 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-04T23:07:49.910Z,1543964869.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:07:49.911Z,1543964869.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:07:49.911Z,1543964869.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:07:49.912Z,1543964869.912 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:07:49.912Z,1543964869.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:07:49.912Z,1543964869.912 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:07:51.088Z,1543964871.088 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:09:14.979Z,1543964954.979 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T23:04:13.4Z 2018-12-04T23:09:14.979Z,1543964954.979 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T23:09:14.979Z,1543964954.979 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T23:09:19.940Z,1543964959.940 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20181203T211451/Courier0450.lzma 2018-12-04T23:09:20.717Z,1543964960.717 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0450.lzma.bak 2018-12-04T23:09:20.717Z,1543964960.717 [DataOverHttps](INFO): SBD MOMSN=8966298 2018-12-04T23:09:30.021Z,1543964970.021 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T23:09:30.106Z,1543964970.106 [DataOverHttps](INFO): Sending 347 bytes from file Logs/20181203T211451/Express0451.lzma 2018-12-04T23:09:30.879Z,1543964970.879 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0451.lzma.bak 2018-12-04T23:09:30.880Z,1543964970.880 [DataOverHttps](INFO): SBD MOMSN=8966301 2018-12-04T23:09:32.240Z,1543964972.240 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T23:09:32.240Z,1543964972.240 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T23:09:32.240Z,1543964972.240 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T23:09:50.002Z,1543964990.002 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:09:50.003Z,1543964990.003 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-04T23:09:50.003Z,1543964990.003 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:09:50.005Z,1543964990.005 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:09:50.005Z,1543964990.005 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-04T23:09:50.005Z,1543964990.005 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:09:50.018Z,1543964990.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:09:50.018Z,1543964990.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:09:50.415Z,1543964990.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:09:50.415Z,1543964990.415 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-04T23:09:50.416Z,1543964990.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:09:50.416Z,1543964990.416 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-04T23:09:50.806Z,1543964990.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:09:50.806Z,1543964990.806 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:09:50.807Z,1543964990.807 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:09:50.807Z,1543964990.807 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:09:50.807Z,1543964990.807 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:09:50.808Z,1543964990.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:10:00.375Z,1543965000.375 [NAL9602](INFO): Powering down 2018-12-04T23:11:51.157Z,1543965111.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:11:51.157Z,1543965111.157 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-04T23:11:51.157Z,1543965111.157 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:11:51.159Z,1543965111.159 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:11:51.159Z,1543965111.159 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-04T23:11:51.159Z,1543965111.159 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:11:51.184Z,1543965111.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:11:51.185Z,1543965111.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:11:51.596Z,1543965111.596 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:11:51.596Z,1543965111.596 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-04T23:11:51.597Z,1543965111.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:11:51.597Z,1543965111.597 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-04T23:11:51.958Z,1543965111.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:11:51.959Z,1543965111.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:11:51.959Z,1543965111.959 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:11:51.959Z,1543965111.959 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:11:51.960Z,1543965111.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:11:51.960Z,1543965111.960 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:13:52.042Z,1543965232.042 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:13:52.042Z,1543965232.042 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-04T23:13:52.042Z,1543965232.042 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:13:52.044Z,1543965232.044 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:13:52.045Z,1543965232.045 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-04T23:13:52.045Z,1543965232.045 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:13:52.058Z,1543965232.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:13:52.058Z,1543965232.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:13:52.454Z,1543965232.454 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:13:52.454Z,1543965232.454 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-04T23:13:52.455Z,1543965232.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:13:52.455Z,1543965232.455 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-04T23:13:52.830Z,1543965232.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:13:52.831Z,1543965232.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:13:52.831Z,1543965232.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:13:52.831Z,1543965232.831 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:13:52.832Z,1543965232.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:13:52.832Z,1543965232.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:14:32.393Z,1543965272.393 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T23:14:32.394Z,1543965272.394 [Default:CheckIn:C.Wait] Stopped 2018-12-04T23:14:32.394Z,1543965272.394 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T23:14:32.394Z,1543965272.394 [Default:CheckIn:D] Running Loop=1 2018-12-04T23:14:32.790Z,1543965272.790 [Default:CheckIn:D] Stopped 2018-12-04T23:14:32.790Z,1543965272.790 [Default:CheckIn:E] Running Loop=1 2018-12-04T23:14:33.199Z,1543965273.199 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1559.679427 min 2018-12-04T23:14:33.199Z,1543965273.199 [Default:CheckIn:E] Stopped 2018-12-04T23:14:33.199Z,1543965273.199 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T23:14:33.199Z,1543965273.199 [Default:CheckIn] Stopped 2018-12-04T23:14:33.199Z,1543965273.199 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T23:14:33.199Z,1543965273.199 [Default:CheckIn](INFO): Running loop #152 2018-12-04T23:14:33.199Z,1543965273.199 [Default:CheckIn] Running Loop=152 2018-12-04T23:14:33.200Z,1543965273.200 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T23:14:33.200Z,1543965273.200 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T23:14:33.967Z,1543965273.967 [NAL9602](INFO): Powering up 2018-12-04T23:14:45.168Z,1543965285.168 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:15:17.124Z,1543965317.124 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T23:15:17.206Z,1543965317.206 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T23:15:17.206Z,1543965317.206 [NAL9602] Data Fault, FailCount= 2 2018-12-04T23:15:17.206Z,1543965317.206 [NAL9602](ERROR): Data Fault 2018-12-04T23:15:17.277Z,1543965317.277 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T23:15:17.523Z,1543965317.523 [NAL9602](INFO): Powering down 2018-12-04T23:15:18.365Z,1543965318.365 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T23:15:18.365Z,1543965318.365 [NAL9602] No Fault, FailCount= 2 2018-12-04T23:15:47.638Z,1543965347.638 [NAL9602](INFO): Powering up NAL9602 2018-12-04T23:15:52.866Z,1543965352.866 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:15:52.867Z,1543965352.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-04T23:15:52.867Z,1543965352.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:15:52.869Z,1543965352.869 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:15:52.869Z,1543965352.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-04T23:15:52.869Z,1543965352.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:15:52.882Z,1543965352.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:15:52.882Z,1543965352.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:15:53.279Z,1543965353.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:15:53.279Z,1543965353.279 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-04T23:15:53.279Z,1543965353.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:15:53.280Z,1543965353.280 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-04T23:15:53.674Z,1543965353.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:15:53.674Z,1543965353.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:15:53.675Z,1543965353.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:15:53.675Z,1543965353.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:15:53.675Z,1543965353.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:15:53.676Z,1543965353.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:15:58.440Z,1543965358.440 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:17:53.682Z,1543965473.682 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:17:53.683Z,1543965473.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-04T23:17:53.683Z,1543965473.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:17:53.685Z,1543965473.685 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:17:53.685Z,1543965473.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-04T23:17:53.685Z,1543965473.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:17:53.715Z,1543965473.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:17:53.715Z,1543965473.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:17:54.084Z,1543965474.084 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:17:54.085Z,1543965474.085 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-04T23:17:54.085Z,1543965474.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:17:54.085Z,1543965474.085 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-04T23:17:54.482Z,1543965474.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:17:54.482Z,1543965474.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:17:54.483Z,1543965474.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:17:54.483Z,1543965474.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:17:54.484Z,1543965474.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:17:54.484Z,1543965474.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:19:34.610Z,1543965574.610 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T23:14:33.2Z 2018-12-04T23:19:34.610Z,1543965574.610 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T23:19:34.611Z,1543965574.611 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T23:19:39.548Z,1543965579.548 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0453.lzma 2018-12-04T23:19:40.341Z,1543965580.341 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0453.lzma.bak 2018-12-04T23:19:40.341Z,1543965580.341 [DataOverHttps](INFO): SBD MOMSN=8966325 2018-12-04T23:19:49.651Z,1543965589.651 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T23:19:49.738Z,1543965589.738 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20181203T211451/Express0454.lzma 2018-12-04T23:19:50.529Z,1543965590.529 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0454.lzma.bak 2018-12-04T23:19:50.529Z,1543965590.529 [DataOverHttps](INFO): SBD MOMSN=8966327 2018-12-04T23:19:51.900Z,1543965591.900 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T23:19:51.900Z,1543965591.900 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T23:19:51.900Z,1543965591.900 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T23:19:55.050Z,1543965595.050 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:19:55.051Z,1543965595.051 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-04T23:19:55.051Z,1543965595.051 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:19:55.053Z,1543965595.053 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:19:55.053Z,1543965595.053 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-04T23:19:55.053Z,1543965595.053 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:19:55.066Z,1543965595.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:19:55.066Z,1543965595.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:19:55.174Z,1543965595.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:19:55.174Z,1543965595.174 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-04T23:19:55.175Z,1543965595.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:19:55.175Z,1543965595.175 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-04T23:19:55.510Z,1543965595.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:19:55.511Z,1543965595.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:19:55.511Z,1543965595.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:19:55.512Z,1543965595.512 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:19:55.512Z,1543965595.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:19:55.512Z,1543965595.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:20:19.877Z,1543965619.877 [NAL9602](INFO): Powering down 2018-12-04T23:21:48.696Z,1543965708.696 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-04T23:21:48.696Z,1543965708.696 [DropWeight] Hardware Fault, FailCount= 1 2018-12-04T23:21:48.696Z,1543965708.696 [DropWeight](ERROR): Hardware Fault 2018-12-04T23:21:48.765Z,1543965708.765 [CBIT](INFO): Critical error at 20181204T232148 2018-12-04T23:21:48.767Z,1543965708.767 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-04T23:21:48.767Z,1543965708.767 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-04T23:21:49.137Z,1543965709.137 [CBIT](INFO): Critical error at 20181204T232148 2018-12-04T23:21:55.522Z,1543965715.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:21:55.522Z,1543965715.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-04T23:21:55.522Z,1543965715.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:21:55.524Z,1543965715.524 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:21:55.525Z,1543965715.525 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-04T23:21:55.525Z,1543965715.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:21:55.544Z,1543965715.544 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:21:55.544Z,1543965715.544 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:21:55.938Z,1543965715.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:21:55.938Z,1543965715.938 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-04T23:21:55.939Z,1543965715.939 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:21:55.939Z,1543965715.939 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-04T23:21:56.318Z,1543965716.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:21:56.319Z,1543965716.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:21:56.319Z,1543965716.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:21:56.320Z,1543965716.320 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:21:56.320Z,1543965716.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:21:56.320Z,1543965716.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:23:56.625Z,1543965836.625 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:23:56.625Z,1543965836.625 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-04T23:23:56.625Z,1543965836.625 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:23:56.627Z,1543965836.627 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:23:56.627Z,1543965836.627 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-04T23:23:56.627Z,1543965836.627 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:23:56.658Z,1543965836.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:23:56.658Z,1543965836.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:23:57.058Z,1543965837.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:23:57.058Z,1543965837.058 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-04T23:23:57.063Z,1543965837.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:23:57.063Z,1543965837.063 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-04T23:23:57.430Z,1543965837.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:23:57.430Z,1543965837.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:23:57.431Z,1543965837.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:23:57.431Z,1543965837.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:23:57.431Z,1543965837.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:23:57.432Z,1543965837.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:24:52.135Z,1543965892.135 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T23:24:52.135Z,1543965892.135 [Default:CheckIn:C.Wait] Stopped 2018-12-04T23:24:52.135Z,1543965892.135 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T23:24:52.135Z,1543965892.135 [Default:CheckIn:D] Running Loop=1 2018-12-04T23:24:52.542Z,1543965892.542 [Default:CheckIn:D] Stopped 2018-12-04T23:24:52.542Z,1543965892.542 [Default:CheckIn:E] Running Loop=1 2018-12-04T23:24:52.965Z,1543965892.965 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1570.008724 min 2018-12-04T23:24:52.966Z,1543965892.966 [Default:CheckIn:E] Stopped 2018-12-04T23:24:52.966Z,1543965892.966 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T23:24:52.966Z,1543965892.966 [Default:CheckIn] Stopped 2018-12-04T23:24:52.966Z,1543965892.966 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T23:24:52.966Z,1543965892.966 [Default:CheckIn](INFO): Running loop #153 2018-12-04T23:24:52.966Z,1543965892.966 [Default:CheckIn] Running Loop=153 2018-12-04T23:24:52.966Z,1543965892.966 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T23:24:52.967Z,1543965892.967 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T23:24:53.713Z,1543965893.713 [NAL9602](INFO): Powering up 2018-12-04T23:25:04.515Z,1543965904.515 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:25:05.316Z,1543965905.316 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T23:25:05.316Z,1543965905.316 [NAL9602] Data Fault, FailCount= 3 2018-12-04T23:25:05.316Z,1543965905.316 [NAL9602](ERROR): Data Fault 2018-12-04T23:25:05.396Z,1543965905.396 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T23:25:05.716Z,1543965905.716 [NAL9602](INFO): Powering down 2018-12-04T23:25:06.549Z,1543965906.549 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T23:25:06.549Z,1543965906.549 [NAL9602] No Fault, FailCount= 3 2018-12-04T23:25:35.845Z,1543965935.845 [NAL9602](INFO): Powering up NAL9602 2018-12-04T23:25:47.895Z,1543965947.895 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:25:57.526Z,1543965957.526 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:25:57.526Z,1543965957.526 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-04T23:25:57.527Z,1543965957.527 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:25:57.529Z,1543965957.529 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:25:57.529Z,1543965957.529 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-04T23:25:57.529Z,1543965957.529 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:25:57.542Z,1543965957.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:25:57.542Z,1543965957.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:25:57.932Z,1543965957.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:25:57.932Z,1543965957.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-04T23:25:57.932Z,1543965957.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:25:57.933Z,1543965957.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-04T23:25:58.322Z,1543965958.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:25:58.323Z,1543965958.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:25:58.323Z,1543965958.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:25:58.323Z,1543965958.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:25:58.324Z,1543965958.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:25:58.324Z,1543965958.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:27:58.650Z,1543966078.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:27:58.650Z,1543966078.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-04T23:27:58.651Z,1543966078.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:27:58.653Z,1543966078.653 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:27:58.653Z,1543966078.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-04T23:27:58.653Z,1543966078.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:27:58.666Z,1543966078.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:27:58.667Z,1543966078.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:27:59.073Z,1543966079.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:27:59.074Z,1543966079.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-04T23:27:59.074Z,1543966079.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:27:59.074Z,1543966079.074 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-04T23:27:59.448Z,1543966079.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:27:59.449Z,1543966079.449 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:27:59.449Z,1543966079.449 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:27:59.450Z,1543966079.450 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:27:59.450Z,1543966079.450 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:27:59.451Z,1543966079.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:29:53.975Z,1543966193.975 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T23:24:52.0Z 2018-12-04T23:29:53.975Z,1543966193.975 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T23:29:53.975Z,1543966193.975 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T23:29:59.007Z,1543966199.007 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0456.lzma 2018-12-04T23:29:59.793Z,1543966199.793 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0456.lzma.bak 2018-12-04T23:29:59.793Z,1543966199.793 [DataOverHttps](INFO): SBD MOMSN=8966351 2018-12-04T23:29:59.850Z,1543966199.850 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:29:59.850Z,1543966199.850 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-04T23:29:59.850Z,1543966199.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:29:59.852Z,1543966199.852 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:29:59.852Z,1543966199.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-04T23:29:59.853Z,1543966199.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:29:59.866Z,1543966199.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:29:59.866Z,1543966199.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:30:01.145Z,1543966201.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:30:01.145Z,1543966201.145 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-04T23:30:01.146Z,1543966201.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:30:01.146Z,1543966201.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-04T23:30:01.262Z,1543966201.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:30:01.263Z,1543966201.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:30:01.263Z,1543966201.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:30:01.264Z,1543966201.264 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:30:01.264Z,1543966201.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:30:01.264Z,1543966201.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:30:09.860Z,1543966209.860 [DataOverHttps](INFO): Sending 308 bytes from file Logs/20181203T211451/Express0457.lzma 2018-12-04T23:30:10.634Z,1543966210.634 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0457.lzma.bak 2018-12-04T23:30:10.635Z,1543966210.635 [DataOverHttps](INFO): SBD MOMSN=8966355 2018-12-04T23:30:11.974Z,1543966211.974 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T23:30:11.974Z,1543966211.974 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T23:30:11.974Z,1543966211.974 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T23:30:51.203Z,1543966251.203 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T23:31:22.001Z,1543966282.001 [NAL9602](INFO): Powering down 2018-12-04T23:32:01.290Z,1543966321.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:32:01.290Z,1543966321.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-04T23:32:01.290Z,1543966321.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:32:01.292Z,1543966321.292 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:32:01.293Z,1543966321.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-04T23:32:01.293Z,1543966321.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:32:01.306Z,1543966321.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:32:01.306Z,1543966321.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:32:01.655Z,1543966321.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:32:01.655Z,1543966321.655 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-04T23:32:01.656Z,1543966321.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:32:01.656Z,1543966321.656 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-04T23:32:02.046Z,1543966322.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:32:02.047Z,1543966322.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:32:02.047Z,1543966322.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:32:02.047Z,1543966322.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:32:02.048Z,1543966322.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:32:02.048Z,1543966322.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:34:02.096Z,1543966442.096 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:34:02.096Z,1543966442.096 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-04T23:34:02.096Z,1543966442.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:34:02.098Z,1543966442.098 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:34:02.098Z,1543966442.098 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-04T23:34:02.098Z,1543966442.098 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:34:02.111Z,1543966442.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:34:02.112Z,1543966442.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:34:02.514Z,1543966442.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:34:02.514Z,1543966442.514 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-04T23:34:02.515Z,1543966442.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:34:02.515Z,1543966442.515 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-04T23:34:02.895Z,1543966442.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:34:02.895Z,1543966442.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:34:02.895Z,1543966442.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:34:02.896Z,1543966442.896 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:34:02.896Z,1543966442.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:34:02.897Z,1543966442.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:35:12.111Z,1543966512.111 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T23:35:12.111Z,1543966512.111 [Default:CheckIn:C.Wait] Stopped 2018-12-04T23:35:12.112Z,1543966512.112 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T23:35:12.112Z,1543966512.112 [Default:CheckIn:D] Running Loop=1 2018-12-04T23:35:12.522Z,1543966512.522 [Default:CheckIn:D] Stopped 2018-12-04T23:35:12.522Z,1543966512.522 [Default:CheckIn:E] Running Loop=1 2018-12-04T23:35:12.918Z,1543966512.918 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1580.341667 min 2018-12-04T23:35:12.918Z,1543966512.918 [Default:CheckIn:E] Stopped 2018-12-04T23:35:12.919Z,1543966512.919 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T23:35:12.919Z,1543966512.919 [Default:CheckIn] Stopped 2018-12-04T23:35:12.919Z,1543966512.919 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T23:35:12.919Z,1543966512.919 [Default:CheckIn](INFO): Running loop #154 2018-12-04T23:35:12.919Z,1543966512.919 [Default:CheckIn] Running Loop=154 2018-12-04T23:35:12.919Z,1543966512.919 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T23:35:12.919Z,1543966512.919 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T23:35:13.691Z,1543966513.691 [NAL9602](INFO): Powering up 2018-12-04T23:35:24.891Z,1543966524.891 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:35:56.843Z,1543966556.843 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T23:35:56.926Z,1543966556.926 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T23:35:56.926Z,1543966556.926 [NAL9602] Data Fault, FailCount= 4 2018-12-04T23:35:56.926Z,1543966556.926 [NAL9602](ERROR): Data Fault 2018-12-04T23:35:57.013Z,1543966557.013 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T23:35:57.243Z,1543966557.243 [NAL9602](INFO): Powering down 2018-12-04T23:35:58.086Z,1543966558.086 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T23:35:58.086Z,1543966558.086 [NAL9602] No Fault, FailCount= 4 2018-12-04T23:36:03.263Z,1543966563.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:36:03.263Z,1543966563.263 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-04T23:36:03.263Z,1543966563.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:36:03.265Z,1543966563.265 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:36:03.265Z,1543966563.265 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-04T23:36:03.265Z,1543966563.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:36:03.294Z,1543966563.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:36:03.294Z,1543966563.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:36:03.706Z,1543966563.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:36:03.706Z,1543966563.706 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-04T23:36:03.707Z,1543966563.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:36:03.707Z,1543966563.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-04T23:36:04.060Z,1543966564.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:36:04.060Z,1543966564.060 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:36:04.061Z,1543966564.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:36:04.061Z,1543966564.061 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:36:04.062Z,1543966564.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:36:04.062Z,1543966564.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:36:27.271Z,1543966587.271 [NAL9602](INFO): Powering up NAL9602 2018-12-04T23:36:38.471Z,1543966598.471 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:36:39.272Z,1543966599.272 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T23:36:39.272Z,1543966599.272 [NAL9602] Data Fault, FailCount= 5 2018-12-04T23:36:39.272Z,1543966599.272 [NAL9602](ERROR): Data Fault 2018-12-04T23:36:39.349Z,1543966599.349 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T23:36:39.349Z,1543966599.349 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-04T23:36:39.675Z,1543966599.675 [NAL9602](INFO): Powering down 2018-12-04T23:36:39.725Z,1543966599.725 [CBIT](INFO): Critical error at 20181204T233639 2018-12-04T23:36:49.030Z,1543966609.030 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-04T23:36:49.030Z,1543966609.030 [DropWeight] No Fault, FailCount= 1 2018-12-04T23:38:04.243Z,1543966684.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:38:04.243Z,1543966684.243 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-04T23:38:04.243Z,1543966684.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:38:04.245Z,1543966684.245 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:38:04.246Z,1543966684.246 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-04T23:38:04.246Z,1543966684.246 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:38:04.294Z,1543966684.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:38:04.295Z,1543966684.295 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:38:04.653Z,1543966684.653 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:38:04.653Z,1543966684.653 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-04T23:38:04.654Z,1543966684.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:38:04.654Z,1543966684.654 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-04T23:38:05.046Z,1543966685.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:38:05.046Z,1543966685.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:38:05.047Z,1543966685.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:38:05.047Z,1543966685.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:38:05.047Z,1543966685.047 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:38:05.048Z,1543966685.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:38:39.436Z,1543966719.436 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T23:38:39.437Z,1543966719.437 [NAL9602] No Fault, FailCount= 5 2018-12-04T23:38:39.793Z,1543966719.793 [NAL9602](INFO): Powering up NAL9602 2018-12-04T23:38:50.000Z,1543966731.000 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:40:05.336Z,1543966805.336 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:40:05.336Z,1543966805.336 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-04T23:40:05.336Z,1543966805.336 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:40:05.338Z,1543966805.338 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:40:05.339Z,1543966805.339 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-04T23:40:05.339Z,1543966805.339 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:40:05.375Z,1543966805.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:40:05.375Z,1543966805.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:40:05.776Z,1543966805.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:40:05.776Z,1543966805.776 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-04T23:40:05.777Z,1543966805.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:40:05.777Z,1543966805.777 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-04T23:40:06.140Z,1543966806.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:40:06.141Z,1543966806.141 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:40:06.141Z,1543966806.141 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:40:06.141Z,1543966806.141 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:40:06.142Z,1543966806.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:40:06.142Z,1543966806.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:40:14.067Z,1543966814.067 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T23:35:12.9Z 2018-12-04T23:40:14.067Z,1543966814.067 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T23:40:14.067Z,1543966814.067 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T23:40:19.121Z,1543966819.121 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0459.lzma 2018-12-04T23:40:19.917Z,1543966819.917 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0459.lzma.bak 2018-12-04T23:40:19.917Z,1543966819.917 [DataOverHttps](INFO): SBD MOMSN=8966376 2018-12-04T23:40:29.230Z,1543966829.230 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T23:40:29.311Z,1543966829.311 [DataOverHttps](INFO): Sending 356 bytes from file Logs/20181203T211451/Express0460.lzma 2018-12-04T23:40:30.075Z,1543966830.075 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0460.lzma.bak 2018-12-04T23:40:30.076Z,1543966830.076 [DataOverHttps](INFO): SBD MOMSN=8966379 2018-12-04T23:40:31.434Z,1543966831.434 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T23:40:31.434Z,1543966831.434 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T23:40:31.434Z,1543966831.434 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T23:40:59.476Z,1543966859.476 [NAL9602](INFO): Powering down 2018-12-04T23:42:06.279Z,1543966926.279 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:42:06.279Z,1543966926.279 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-04T23:42:06.279Z,1543966926.279 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:42:06.281Z,1543966926.281 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:42:06.281Z,1543966926.281 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-04T23:42:06.281Z,1543966926.281 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:42:06.295Z,1543966926.295 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:42:06.295Z,1543966926.295 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:42:06.684Z,1543966926.684 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:42:06.684Z,1543966926.684 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-04T23:42:06.685Z,1543966926.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:42:06.685Z,1543966926.685 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-04T23:42:07.071Z,1543966927.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:42:07.071Z,1543966927.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:42:07.072Z,1543966927.072 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:42:07.072Z,1543966927.072 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:42:07.072Z,1543966927.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:42:07.073Z,1543966927.073 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:44:07.162Z,1543967047.162 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:44:07.162Z,1543967047.162 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-04T23:44:07.163Z,1543967047.163 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:44:07.165Z,1543967047.165 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:44:07.165Z,1543967047.165 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-04T23:44:07.165Z,1543967047.165 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:44:07.178Z,1543967047.178 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:44:07.178Z,1543967047.178 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:44:07.577Z,1543967047.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:44:07.577Z,1543967047.577 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-04T23:44:07.578Z,1543967047.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:44:07.578Z,1543967047.578 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-04T23:44:07.961Z,1543967047.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:44:07.961Z,1543967047.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:44:07.962Z,1543967047.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:44:07.962Z,1543967047.962 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:44:07.962Z,1543967047.962 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:44:07.963Z,1543967047.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:45:31.913Z,1543967131.913 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T23:45:31.914Z,1543967131.914 [Default:CheckIn:C.Wait] Stopped 2018-12-04T23:45:31.914Z,1543967131.914 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T23:45:31.914Z,1543967131.914 [Default:CheckIn:D] Running Loop=1 2018-12-04T23:45:32.326Z,1543967132.326 [Default:CheckIn:D] Stopped 2018-12-04T23:45:32.326Z,1543967132.326 [Default:CheckIn:E] Running Loop=1 2018-12-04T23:45:32.721Z,1543967132.721 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1590.671615 min 2018-12-04T23:45:32.721Z,1543967132.721 [Default:CheckIn:E] Stopped 2018-12-04T23:45:32.722Z,1543967132.722 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T23:45:32.722Z,1543967132.722 [Default:CheckIn] Stopped 2018-12-04T23:45:32.722Z,1543967132.722 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T23:45:32.722Z,1543967132.722 [Default:CheckIn](INFO): Running loop #155 2018-12-04T23:45:32.722Z,1543967132.722 [Default:CheckIn] Running Loop=155 2018-12-04T23:45:32.722Z,1543967132.722 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T23:45:32.722Z,1543967132.722 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T23:45:33.488Z,1543967133.488 [NAL9602](INFO): Powering up 2018-12-04T23:45:44.688Z,1543967144.688 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:46:08.269Z,1543967168.269 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:46:08.269Z,1543967168.269 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-04T23:46:08.269Z,1543967168.269 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:46:08.279Z,1543967168.279 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:46:08.279Z,1543967168.279 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-04T23:46:08.280Z,1543967168.280 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:46:08.299Z,1543967168.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:46:08.299Z,1543967168.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:46:08.697Z,1543967168.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:46:08.697Z,1543967168.697 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-04T23:46:08.698Z,1543967168.698 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:46:08.698Z,1543967168.698 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-04T23:46:09.085Z,1543967169.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:46:09.086Z,1543967169.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:46:09.086Z,1543967169.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:46:09.087Z,1543967169.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:46:09.087Z,1543967169.087 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:46:09.088Z,1543967169.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:46:16.652Z,1543967176.652 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-04T23:46:16.726Z,1543967176.726 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-04T23:46:16.727Z,1543967176.727 [NAL9602] Data Fault, FailCount= 1 2018-12-04T23:46:16.727Z,1543967176.727 [NAL9602](ERROR): Data Fault 2018-12-04T23:46:16.760Z,1543967176.760 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T23:46:17.052Z,1543967177.052 [NAL9602](INFO): Powering down 2018-12-04T23:46:17.903Z,1543967177.903 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T23:46:17.903Z,1543967177.903 [NAL9602] No Fault, FailCount= 1 2018-12-04T23:46:47.169Z,1543967207.169 [NAL9602](INFO): Powering up NAL9602 2018-12-04T23:46:57.972Z,1543967217.972 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:48:09.318Z,1543967289.318 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:48:09.318Z,1543967289.318 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-04T23:48:09.318Z,1543967289.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:48:09.320Z,1543967289.320 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:48:09.320Z,1543967289.320 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-04T23:48:09.321Z,1543967289.321 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:48:09.364Z,1543967289.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:48:09.364Z,1543967289.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:48:09.737Z,1543967289.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:48:09.737Z,1543967289.737 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-04T23:48:09.738Z,1543967289.738 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:48:09.738Z,1543967289.738 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-04T23:48:12.838Z,1543967292.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:48:12.839Z,1543967292.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:48:12.839Z,1543967292.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:48:12.839Z,1543967292.839 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:48:12.840Z,1543967292.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:48:12.840Z,1543967292.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:50:13.078Z,1543967413.078 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:50:13.079Z,1543967413.079 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-04T23:50:13.079Z,1543967413.079 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:50:13.081Z,1543967413.081 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:50:13.081Z,1543967413.081 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-04T23:50:13.081Z,1543967413.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:50:13.144Z,1543967413.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:50:13.144Z,1543967413.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:50:13.490Z,1543967413.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:50:13.490Z,1543967413.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-04T23:50:13.523Z,1543967413.523 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:50:13.523Z,1543967413.523 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-04T23:50:13.903Z,1543967413.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:50:13.904Z,1543967413.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:50:13.904Z,1543967413.904 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:50:13.904Z,1543967413.904 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:50:13.905Z,1543967413.905 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:50:13.905Z,1543967413.905 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:50:33.855Z,1543967433.855 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T23:45:32.7Z 2018-12-04T23:50:33.855Z,1543967433.855 [Default:CheckIn:Read_GPS] Stopped 2018-12-04T23:50:33.855Z,1543967433.855 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-04T23:50:38.800Z,1543967438.800 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0462.lzma 2018-12-04T23:50:39.602Z,1543967439.602 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0462.lzma.bak 2018-12-04T23:50:39.608Z,1543967439.608 [DataOverHttps](INFO): SBD MOMSN=8966476 2018-12-04T23:50:48.868Z,1543967448.868 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-04T23:50:48.943Z,1543967448.943 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0463.lzma 2018-12-04T23:50:49.733Z,1543967449.733 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0463.lzma.bak 2018-12-04T23:50:49.733Z,1543967449.733 [DataOverHttps](INFO): SBD MOMSN=8966478 2018-12-04T23:50:51.128Z,1543967451.128 [Default:CheckIn:Read_Iridium] Stopped 2018-12-04T23:50:51.128Z,1543967451.128 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-04T23:50:51.128Z,1543967451.128 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-04T23:51:19.120Z,1543967479.120 [NAL9602](INFO): Powering down 2018-12-04T23:52:14.249Z,1543967534.249 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:52:14.250Z,1543967534.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-04T23:52:14.250Z,1543967534.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:52:14.252Z,1543967534.252 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:52:14.252Z,1543967534.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-04T23:52:14.252Z,1543967534.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:52:14.265Z,1543967534.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:52:14.265Z,1543967534.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:52:14.670Z,1543967534.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:52:14.670Z,1543967534.670 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-04T23:52:14.670Z,1543967534.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:52:14.670Z,1543967534.670 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-04T23:52:15.058Z,1543967535.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:52:15.058Z,1543967535.058 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:52:15.059Z,1543967535.059 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:52:15.059Z,1543967535.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:52:15.059Z,1543967535.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:52:15.060Z,1543967535.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:54:15.250Z,1543967655.250 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:54:15.250Z,1543967655.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-04T23:54:15.250Z,1543967655.250 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:54:15.252Z,1543967655.252 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:54:15.252Z,1543967655.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-04T23:54:15.252Z,1543967655.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:54:15.265Z,1543967655.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:54:15.266Z,1543967655.266 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:54:15.666Z,1543967655.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:54:15.666Z,1543967655.666 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-04T23:54:15.666Z,1543967655.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:54:15.666Z,1543967655.666 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-04T23:54:16.042Z,1543967656.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:54:16.042Z,1543967656.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:54:16.043Z,1543967656.043 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:54:16.043Z,1543967656.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:54:16.044Z,1543967656.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:54:16.044Z,1543967656.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:55:51.353Z,1543967751.353 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-04T23:55:51.353Z,1543967751.353 [Default:CheckIn:C.Wait] Stopped 2018-12-04T23:55:51.353Z,1543967751.353 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-04T23:55:51.354Z,1543967751.354 [Default:CheckIn:D] Running Loop=1 2018-12-04T23:55:51.758Z,1543967751.758 [Default:CheckIn:D] Stopped 2018-12-04T23:55:51.758Z,1543967751.758 [Default:CheckIn:E] Running Loop=1 2018-12-04T23:55:52.169Z,1543967752.169 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1600.995573 min 2018-12-04T23:55:52.169Z,1543967752.169 [Default:CheckIn:E] Stopped 2018-12-04T23:55:52.169Z,1543967752.169 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-04T23:55:52.169Z,1543967752.169 [Default:CheckIn] Stopped 2018-12-04T23:55:52.169Z,1543967752.169 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-04T23:55:52.170Z,1543967752.170 [Default:CheckIn](INFO): Running loop #156 2018-12-04T23:55:52.170Z,1543967752.170 [Default:CheckIn] Running Loop=156 2018-12-04T23:55:52.170Z,1543967752.170 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-04T23:55:52.170Z,1543967752.170 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-04T23:55:52.925Z,1543967752.925 [NAL9602](INFO): Powering up 2018-12-04T23:56:03.728Z,1543967763.728 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:56:04.528Z,1543967764.528 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-04T23:56:04.528Z,1543967764.528 [NAL9602] Data Fault, FailCount= 2 2018-12-04T23:56:04.528Z,1543967764.528 [NAL9602](ERROR): Data Fault 2018-12-04T23:56:04.602Z,1543967764.602 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-04T23:56:04.928Z,1543967764.928 [NAL9602](INFO): Powering down 2018-12-04T23:56:05.772Z,1543967765.772 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-04T23:56:05.772Z,1543967765.772 [NAL9602] No Fault, FailCount= 2 2018-12-04T23:56:16.168Z,1543967776.168 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:56:16.168Z,1543967776.168 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-04T23:56:16.168Z,1543967776.168 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:56:16.170Z,1543967776.170 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:56:16.170Z,1543967776.170 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-04T23:56:16.170Z,1543967776.170 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:56:16.184Z,1543967776.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:56:16.184Z,1543967776.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:56:16.586Z,1543967776.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:56:16.586Z,1543967776.586 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-04T23:56:16.586Z,1543967776.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:56:16.586Z,1543967776.586 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-04T23:56:16.968Z,1543967776.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:56:16.969Z,1543967776.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:56:16.969Z,1543967776.969 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:56:16.969Z,1543967776.969 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:56:16.970Z,1543967776.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:56:16.970Z,1543967776.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:56:34.941Z,1543967794.941 [NAL9602](INFO): Powering up NAL9602 2018-12-04T23:56:47.362Z,1543967807.362 [NAL9602](INFO): NAL9602 initialized 2018-12-04T23:58:17.297Z,1543967897.297 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:58:17.297Z,1543967897.297 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-04T23:58:17.297Z,1543967897.297 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-04T23:58:17.299Z,1543967897.299 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-04T23:58:17.299Z,1543967897.299 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-04T23:58:17.300Z,1543967897.300 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-04T23:58:17.336Z,1543967897.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-04T23:58:17.337Z,1543967897.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-04T23:58:17.742Z,1543967897.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-04T23:58:17.742Z,1543967897.742 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-04T23:58:17.743Z,1543967897.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-04T23:58:17.743Z,1543967897.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-04T23:58:18.106Z,1543967898.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-04T23:58:18.106Z,1543967898.106 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:58:18.107Z,1543967898.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-04T23:58:18.107Z,1543967898.107 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-04T23:58:18.107Z,1543967898.107 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-04T23:58:18.108Z,1543967898.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:00:08.388Z,1543968008.388 [Reporter](INFO): platform_buoyancy_position 961.426529 cc 2018-12-05T00:00:18.214Z,1543968018.214 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:00:18.214Z,1543968018.214 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-05T00:00:18.215Z,1543968018.215 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:00:18.217Z,1543968018.217 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:00:18.217Z,1543968018.217 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-05T00:00:18.217Z,1543968018.217 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:00:18.231Z,1543968018.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:00:18.231Z,1543968018.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:00:18.371Z,1543968018.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:00:18.371Z,1543968018.371 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-05T00:00:18.372Z,1543968018.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:00:18.372Z,1543968018.372 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-05T00:00:18.686Z,1543968018.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:00:18.687Z,1543968018.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:00:18.687Z,1543968018.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:00:18.687Z,1543968018.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:00:18.688Z,1543968018.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:00:18.688Z,1543968018.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:00:53.368Z,1543968053.368 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-04T23:55:52.2Z 2018-12-05T00:00:53.368Z,1543968053.368 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T00:00:53.368Z,1543968053.368 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T00:00:58.433Z,1543968058.433 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0465.lzma 2018-12-05T00:00:59.233Z,1543968059.233 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0465.lzma.bak 2018-12-05T00:00:59.233Z,1543968059.233 [DataOverHttps](INFO): SBD MOMSN=8966501 2018-12-05T00:01:09.092Z,1543968069.092 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0466.lzma 2018-12-05T00:01:09.893Z,1543968069.893 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0466.lzma.bak 2018-12-05T00:01:09.893Z,1543968069.893 [DataOverHttps](INFO): SBD MOMSN=8966503 2018-12-05T00:01:11.350Z,1543968071.350 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T00:01:11.350Z,1543968071.350 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T00:01:11.350Z,1543968071.350 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T00:01:50.408Z,1543968110.408 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T00:02:18.834Z,1543968138.834 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:02:18.834Z,1543968138.834 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-05T00:02:18.854Z,1543968138.854 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:02:18.857Z,1543968138.857 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:02:18.857Z,1543968138.857 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-05T00:02:18.857Z,1543968138.857 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:02:18.871Z,1543968138.871 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:02:18.871Z,1543968138.871 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:02:19.250Z,1543968139.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:02:19.250Z,1543968139.250 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-05T00:02:19.251Z,1543968139.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:02:19.251Z,1543968139.251 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-05T00:02:19.634Z,1543968139.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:02:19.650Z,1543968139.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:02:19.650Z,1543968139.650 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:02:19.650Z,1543968139.650 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:02:19.651Z,1543968139.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:02:19.651Z,1543968139.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:02:21.208Z,1543968141.208 [NAL9602](INFO): Powering down 2018-12-05T00:04:19.714Z,1543968259.714 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:04:19.714Z,1543968259.714 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-05T00:04:19.714Z,1543968259.714 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:04:19.716Z,1543968259.716 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:04:19.716Z,1543968259.716 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-05T00:04:19.716Z,1543968259.716 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:04:19.730Z,1543968259.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:04:19.730Z,1543968259.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:04:20.131Z,1543968260.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:04:20.131Z,1543968260.131 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-05T00:04:20.131Z,1543968260.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:04:20.131Z,1543968260.131 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-05T00:04:20.517Z,1543968260.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:04:20.518Z,1543968260.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:04:20.519Z,1543968260.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:04:20.519Z,1543968260.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:04:20.520Z,1543968260.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:04:20.520Z,1543968260.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:06:11.564Z,1543968371.564 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T00:06:11.564Z,1543968371.564 [Default:CheckIn:C.Wait] Stopped 2018-12-05T00:06:11.564Z,1543968371.564 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T00:06:11.564Z,1543968371.564 [Default:CheckIn:D] Running Loop=1 2018-12-05T00:06:11.964Z,1543968371.964 [Default:CheckIn:D] Stopped 2018-12-05T00:06:11.964Z,1543968371.964 [Default:CheckIn:E] Running Loop=1 2018-12-05T00:06:12.363Z,1543968372.363 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1611.332422 min 2018-12-05T00:06:12.363Z,1543968372.363 [Default:CheckIn:E] Stopped 2018-12-05T00:06:12.364Z,1543968372.364 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T00:06:12.364Z,1543968372.364 [Default:CheckIn] Stopped 2018-12-05T00:06:12.364Z,1543968372.364 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T00:06:12.364Z,1543968372.364 [Default:CheckIn](INFO): Running loop #157 2018-12-05T00:06:12.364Z,1543968372.364 [Default:CheckIn] Running Loop=157 2018-12-05T00:06:12.364Z,1543968372.364 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T00:06:12.364Z,1543968372.364 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T00:06:13.120Z,1543968373.120 [NAL9602](INFO): Powering up 2018-12-05T00:06:20.743Z,1543968380.743 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:06:20.743Z,1543968380.743 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-05T00:06:20.743Z,1543968380.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:06:20.745Z,1543968380.745 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:06:20.745Z,1543968380.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-05T00:06:20.745Z,1543968380.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:06:20.789Z,1543968380.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:06:20.790Z,1543968380.790 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:06:21.151Z,1543968381.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:06:21.151Z,1543968381.151 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-05T00:06:21.151Z,1543968381.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:06:21.152Z,1543968381.152 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-05T00:06:21.539Z,1543968381.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:06:21.540Z,1543968381.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:06:21.540Z,1543968381.540 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:06:21.541Z,1543968381.541 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:06:21.541Z,1543968381.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:06:21.541Z,1543968381.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:06:23.924Z,1543968383.924 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:06:50.347Z,1543968410.347 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T00:06:50.347Z,1543968410.347 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T00:06:50.347Z,1543968410.347 [DropWeight](ERROR): Hardware Fault 2018-12-05T00:06:50.412Z,1543968410.412 [CBIT](INFO): Critical error at 20181205T000650 2018-12-05T00:06:50.418Z,1543968410.418 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T00:06:50.419Z,1543968410.419 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T00:06:50.793Z,1543968410.793 [CBIT](INFO): Critical error at 20181205T000650 2018-12-05T00:06:55.547Z,1543968415.547 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T00:06:55.626Z,1543968415.626 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T00:06:55.626Z,1543968415.626 [NAL9602] Data Fault, FailCount= 3 2018-12-05T00:06:55.626Z,1543968415.626 [NAL9602](ERROR): Data Fault 2018-12-05T00:06:55.664Z,1543968415.664 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T00:06:55.947Z,1543968415.947 [NAL9602](INFO): Powering down 2018-12-05T00:06:56.803Z,1543968416.803 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T00:06:56.803Z,1543968416.803 [NAL9602] No Fault, FailCount= 3 2018-12-05T00:07:26.318Z,1543968446.318 [NAL9602](INFO): Powering up NAL9602 2018-12-05T00:07:37.522Z,1543968457.522 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:07:38.314Z,1543968458.314 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T00:07:38.314Z,1543968458.314 [NAL9602] Data Fault, FailCount= 4 2018-12-05T00:07:38.315Z,1543968458.315 [NAL9602](ERROR): Data Fault 2018-12-05T00:07:38.413Z,1543968458.413 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T00:07:38.722Z,1543968458.722 [NAL9602](INFO): Powering down 2018-12-05T00:07:42.141Z,1543968462.141 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T00:07:42.141Z,1543968462.141 [NAL9602] No Fault, FailCount= 4 2018-12-05T00:08:08.863Z,1543968488.863 [NAL9602](INFO): Powering up NAL9602 2018-12-05T00:08:19.815Z,1543968499.815 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:08:21.862Z,1543968501.862 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:08:21.863Z,1543968501.863 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-05T00:08:21.863Z,1543968501.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:08:21.865Z,1543968501.865 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:08:21.865Z,1543968501.865 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-05T00:08:21.865Z,1543968501.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:08:21.907Z,1543968501.907 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:08:21.908Z,1543968501.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:08:22.259Z,1543968502.259 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:08:22.259Z,1543968502.259 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-05T00:08:22.259Z,1543968502.259 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:08:22.260Z,1543968502.260 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-05T00:08:22.650Z,1543968502.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:08:22.651Z,1543968502.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:08:22.651Z,1543968502.651 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:08:22.652Z,1543968502.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:08:22.652Z,1543968502.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:08:22.653Z,1543968502.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:10:23.023Z,1543968623.023 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:10:23.023Z,1543968623.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-05T00:10:23.023Z,1543968623.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:10:23.025Z,1543968623.025 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:10:23.025Z,1543968623.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-05T00:10:23.025Z,1543968623.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:10:23.068Z,1543968623.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:10:23.069Z,1543968623.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:10:23.438Z,1543968623.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:10:23.439Z,1543968623.439 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-05T00:10:23.439Z,1543968623.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:10:23.439Z,1543968623.439 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-05T00:10:23.824Z,1543968623.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:10:23.825Z,1543968623.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:10:23.825Z,1543968623.825 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:10:23.826Z,1543968623.826 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:10:23.826Z,1543968623.826 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:10:23.827Z,1543968623.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:10:47.189Z,1543968647.189 [BPC1](INFO): Calculating totals. Valid battery stick count: 54. Valid reserve battery stick count: 6. 2018-12-05T00:11:13.547Z,1543968673.547 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T00:06:12.4Z 2018-12-05T00:11:13.547Z,1543968673.547 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T00:11:13.548Z,1543968673.548 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T00:11:18.466Z,1543968678.466 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0468.lzma 2018-12-05T00:11:19.241Z,1543968679.241 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0468.lzma.bak 2018-12-05T00:11:19.241Z,1543968679.241 [DataOverHttps](INFO): SBD MOMSN=8966609 2018-12-05T00:11:28.660Z,1543968688.660 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T00:11:28.746Z,1543968688.746 [DataOverHttps](INFO): Sending 343 bytes from file Logs/20181203T211451/Express0469.lzma 2018-12-05T00:11:29.541Z,1543968689.541 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0469.lzma.bak 2018-12-05T00:11:29.542Z,1543968689.542 [DataOverHttps](INFO): SBD MOMSN=8966613 2018-12-05T00:11:30.884Z,1543968690.884 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T00:11:30.884Z,1543968690.884 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T00:11:30.884Z,1543968690.884 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T00:11:58.891Z,1543968718.891 [NAL9602](INFO): Powering down 2018-12-05T00:12:24.074Z,1543968744.074 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:12:24.074Z,1543968744.074 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-05T00:12:24.075Z,1543968744.075 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:12:24.077Z,1543968744.077 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:12:24.077Z,1543968744.077 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-05T00:12:24.077Z,1543968744.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:12:24.091Z,1543968744.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:12:24.091Z,1543968744.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:12:24.486Z,1543968744.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:12:24.486Z,1543968744.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-05T00:12:24.486Z,1543968744.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:12:24.487Z,1543968744.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-05T00:12:24.870Z,1543968744.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:12:24.871Z,1543968744.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:12:24.871Z,1543968744.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:12:24.872Z,1543968744.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:12:24.872Z,1543968744.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:12:24.872Z,1543968744.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:14:24.972Z,1543968864.972 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:14:24.972Z,1543968864.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-05T00:14:24.972Z,1543968864.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:14:24.974Z,1543968864.974 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:14:24.974Z,1543968864.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-05T00:14:24.974Z,1543968864.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:14:24.988Z,1543968864.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:14:24.988Z,1543968864.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:14:25.395Z,1543968865.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:14:25.395Z,1543968865.395 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-05T00:14:25.395Z,1543968865.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:14:25.395Z,1543968865.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-05T00:14:25.778Z,1543968865.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:14:25.778Z,1543968865.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:14:25.779Z,1543968865.779 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:14:25.779Z,1543968865.779 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:14:25.779Z,1543968865.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:14:25.780Z,1543968865.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:16:26.097Z,1543968986.097 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:16:26.098Z,1543968986.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-05T00:16:26.098Z,1543968986.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:16:26.100Z,1543968986.100 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:16:26.100Z,1543968986.100 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-05T00:16:26.100Z,1543968986.100 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:16:26.125Z,1543968986.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:16:26.126Z,1543968986.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:16:26.521Z,1543968986.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:16:26.521Z,1543968986.521 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-05T00:16:26.521Z,1543968986.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:16:26.522Z,1543968986.522 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-05T00:16:26.906Z,1543968986.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:16:26.906Z,1543968986.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:16:26.907Z,1543968986.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:16:26.907Z,1543968986.907 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:16:26.907Z,1543968986.907 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:16:26.908Z,1543968986.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:16:31.394Z,1543968991.394 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T00:16:31.394Z,1543968991.394 [Default:CheckIn:C.Wait] Stopped 2018-12-05T00:16:31.394Z,1543968991.394 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T00:16:31.398Z,1543968991.398 [Default:CheckIn:D] Running Loop=1 2018-12-05T00:16:31.706Z,1543968991.706 [Default:CheckIn:D] Stopped 2018-12-05T00:16:31.706Z,1543968991.706 [Default:CheckIn:E] Running Loop=1 2018-12-05T00:16:32.102Z,1543968992.102 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1621.661458 min 2018-12-05T00:16:32.102Z,1543968992.102 [Default:CheckIn:E] Stopped 2018-12-05T00:16:32.102Z,1543968992.102 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T00:16:32.102Z,1543968992.102 [Default:CheckIn] Stopped 2018-12-05T00:16:32.103Z,1543968992.103 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T00:16:32.103Z,1543968992.103 [Default:CheckIn](INFO): Running loop #158 2018-12-05T00:16:32.103Z,1543968992.103 [Default:CheckIn] Running Loop=158 2018-12-05T00:16:32.103Z,1543968992.103 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T00:16:32.103Z,1543968992.103 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T00:16:32.882Z,1543968992.882 [NAL9602](INFO): Powering up 2018-12-05T00:16:43.686Z,1543969003.686 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:18:27.245Z,1543969107.245 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:18:27.245Z,1543969107.245 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-05T00:18:27.245Z,1543969107.245 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:18:27.247Z,1543969107.247 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:18:27.247Z,1543969107.247 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-05T00:18:27.247Z,1543969107.247 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:18:27.282Z,1543969107.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:18:27.282Z,1543969107.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:18:27.681Z,1543969107.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:18:27.682Z,1543969107.682 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-05T00:18:27.682Z,1543969107.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:18:27.682Z,1543969107.682 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-05T00:18:28.069Z,1543969108.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:18:28.070Z,1543969108.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:18:28.070Z,1543969108.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:18:28.070Z,1543969108.070 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:18:28.071Z,1543969108.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:18:28.071Z,1543969108.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:20:28.388Z,1543969228.388 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:20:28.388Z,1543969228.388 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-05T00:20:28.388Z,1543969228.388 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:20:28.390Z,1543969228.390 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:20:28.390Z,1543969228.390 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-05T00:20:28.390Z,1543969228.390 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:20:28.404Z,1543969228.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:20:28.404Z,1543969228.404 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:20:28.803Z,1543969228.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:20:28.803Z,1543969228.803 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-05T00:20:28.804Z,1543969228.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:20:28.804Z,1543969228.804 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-05T00:20:29.189Z,1543969229.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:20:29.189Z,1543969229.189 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:20:29.190Z,1543969229.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:20:29.190Z,1543969229.190 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:20:29.191Z,1543969229.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:20:29.191Z,1543969229.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:21:33.171Z,1543969293.171 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T00:16:32.1Z 2018-12-05T00:21:33.171Z,1543969293.171 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T00:21:33.171Z,1543969293.171 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T00:21:38.088Z,1543969298.088 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0471.lzma 2018-12-05T00:21:38.867Z,1543969298.867 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0471.lzma.bak 2018-12-05T00:21:38.867Z,1543969298.867 [DataOverHttps](INFO): SBD MOMSN=8966641 2018-12-05T00:21:49.080Z,1543969309.080 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T00:21:49.156Z,1543969309.156 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0472.lzma 2018-12-05T00:21:49.941Z,1543969309.941 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0472.lzma.bak 2018-12-05T00:21:49.941Z,1543969309.941 [DataOverHttps](INFO): SBD MOMSN=8966643 2018-12-05T00:21:51.264Z,1543969311.264 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T00:21:51.264Z,1543969311.264 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T00:21:51.264Z,1543969311.264 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T00:21:51.304Z,1543969311.304 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T00:21:51.304Z,1543969311.304 [DropWeight] No Fault, FailCount= 1 2018-12-05T00:22:19.315Z,1543969339.315 [NAL9602](INFO): Powering down 2018-12-05T00:22:30.192Z,1543969350.192 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:22:30.192Z,1543969350.192 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-05T00:22:30.193Z,1543969350.193 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:22:30.195Z,1543969350.195 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:22:30.195Z,1543969350.195 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-05T00:22:30.195Z,1543969350.195 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:22:30.255Z,1543969350.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:22:30.255Z,1543969350.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:22:30.335Z,1543969350.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:22:30.335Z,1543969350.335 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-05T00:22:30.336Z,1543969350.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:22:30.336Z,1543969350.336 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-05T00:22:30.690Z,1543969350.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:22:30.691Z,1543969350.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:22:30.692Z,1543969350.692 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:22:30.692Z,1543969350.692 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:22:30.692Z,1543969350.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:22:30.693Z,1543969350.693 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:24:31.069Z,1543969471.069 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:24:31.069Z,1543969471.069 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-05T00:24:31.069Z,1543969471.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:24:31.071Z,1543969471.071 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:24:31.071Z,1543969471.071 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-05T00:24:31.071Z,1543969471.071 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:24:31.084Z,1543969471.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:24:31.085Z,1543969471.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:24:31.486Z,1543969471.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:24:31.486Z,1543969471.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-05T00:24:31.487Z,1543969471.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:24:31.487Z,1543969471.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-05T00:24:31.874Z,1543969471.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:24:31.874Z,1543969471.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:24:31.875Z,1543969471.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:24:31.875Z,1543969471.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:24:31.875Z,1543969471.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:24:31.876Z,1543969471.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:26:31.970Z,1543969591.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:26:31.970Z,1543969591.970 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-05T00:26:31.971Z,1543969591.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:26:31.973Z,1543969591.973 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:26:31.973Z,1543969591.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-05T00:26:31.973Z,1543969591.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:26:31.986Z,1543969591.986 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:26:31.987Z,1543969591.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:26:32.383Z,1543969592.383 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:26:32.383Z,1543969592.383 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-05T00:26:32.384Z,1543969592.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:26:32.384Z,1543969592.384 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-05T00:26:32.774Z,1543969592.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:26:32.775Z,1543969592.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:26:32.775Z,1543969592.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:26:32.775Z,1543969592.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:26:32.776Z,1543969592.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:26:32.776Z,1543969592.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:26:51.629Z,1543969611.629 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T00:26:51.630Z,1543969611.630 [Default:CheckIn:C.Wait] Stopped 2018-12-05T00:26:51.630Z,1543969611.630 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T00:26:51.630Z,1543969611.630 [Default:CheckIn:D] Running Loop=1 2018-12-05T00:26:52.028Z,1543969612.028 [Default:CheckIn:D] Stopped 2018-12-05T00:26:52.028Z,1543969612.028 [Default:CheckIn:E] Running Loop=1 2018-12-05T00:26:52.434Z,1543969612.434 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1632.000130 min 2018-12-05T00:26:52.434Z,1543969612.434 [Default:CheckIn:E] Stopped 2018-12-05T00:26:52.434Z,1543969612.434 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T00:26:52.435Z,1543969612.435 [Default:CheckIn] Stopped 2018-12-05T00:26:52.435Z,1543969612.435 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T00:26:52.435Z,1543969612.435 [Default:CheckIn](INFO): Running loop #159 2018-12-05T00:26:52.435Z,1543969612.435 [Default:CheckIn] Running Loop=159 2018-12-05T00:26:52.435Z,1543969612.435 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T00:26:52.435Z,1543969612.435 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T00:26:53.197Z,1543969613.197 [NAL9602](INFO): Powering up 2018-12-05T00:27:03.000Z,1543969624.000 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:27:04.800Z,1543969624.800 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T00:27:04.800Z,1543969624.800 [NAL9602] Data Fault, FailCount= 5 2018-12-05T00:27:04.800Z,1543969624.800 [NAL9602](ERROR): Data Fault 2018-12-05T00:27:04.869Z,1543969624.869 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T00:27:04.869Z,1543969624.869 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T00:27:05.200Z,1543969625.200 [NAL9602](INFO): Powering down 2018-12-05T00:27:05.244Z,1543969625.244 [CBIT](INFO): Critical error at 20181205T002704 2018-12-05T00:28:32.850Z,1543969712.850 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:28:32.851Z,1543969712.851 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-05T00:28:32.851Z,1543969712.851 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:28:32.853Z,1543969712.853 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:28:32.853Z,1543969712.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-05T00:28:32.853Z,1543969712.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:28:32.867Z,1543969712.867 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:28:32.868Z,1543969712.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:28:33.267Z,1543969713.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:28:33.267Z,1543969713.267 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-05T00:28:33.267Z,1543969713.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:28:33.267Z,1543969713.267 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-05T00:28:33.645Z,1543969713.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:28:33.645Z,1543969713.645 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:28:33.646Z,1543969713.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:28:33.646Z,1543969713.646 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:28:33.646Z,1543969713.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:28:33.647Z,1543969713.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:29:04.861Z,1543969744.861 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T00:29:04.861Z,1543969744.861 [NAL9602] No Fault, FailCount= 5 2018-12-05T00:29:05.196Z,1543969745.196 [NAL9602](INFO): Powering up NAL9602 2018-12-05T00:29:16.396Z,1543969756.396 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:30:34.027Z,1543969834.027 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:30:34.027Z,1543969834.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-05T00:30:34.027Z,1543969834.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:30:34.029Z,1543969834.029 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:30:34.029Z,1543969834.029 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-05T00:30:34.029Z,1543969834.029 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:30:34.074Z,1543969834.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:30:34.075Z,1543969834.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:30:34.458Z,1543969834.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:30:34.458Z,1543969834.458 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-05T00:30:34.459Z,1543969834.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:30:34.459Z,1543969834.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-05T00:30:34.842Z,1543969834.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:30:34.857Z,1543969834.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:30:34.858Z,1543969834.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:30:34.858Z,1543969834.858 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:30:34.859Z,1543969834.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:30:34.859Z,1543969834.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:31:53.839Z,1543969913.839 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T00:26:52.4Z 2018-12-05T00:31:53.839Z,1543969913.839 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T00:31:53.839Z,1543969913.839 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T00:31:58.804Z,1543969918.804 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0474.lzma 2018-12-05T00:31:59.605Z,1543969919.605 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0474.lzma.bak 2018-12-05T00:31:59.605Z,1543969919.605 [DataOverHttps](INFO): SBD MOMSN=8966671 2018-12-05T00:32:09.103Z,1543969929.103 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0475.lzma 2018-12-05T00:32:09.902Z,1543969929.902 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0475.lzma.bak 2018-12-05T00:32:09.902Z,1543969929.902 [DataOverHttps](INFO): SBD MOMSN=8966674 2018-12-05T00:32:11.291Z,1543969931.291 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T00:32:11.291Z,1543969931.291 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T00:32:11.292Z,1543969931.292 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T00:32:35.022Z,1543969955.022 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:32:35.023Z,1543969955.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-05T00:32:35.023Z,1543969955.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:32:35.025Z,1543969955.025 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:32:35.025Z,1543969955.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-05T00:32:35.025Z,1543969955.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:32:35.063Z,1543969955.063 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:32:35.063Z,1543969955.063 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:32:35.431Z,1543969955.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:32:35.431Z,1543969955.431 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-05T00:32:35.431Z,1543969955.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:32:35.431Z,1543969955.431 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-05T00:32:35.819Z,1543969955.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:32:35.819Z,1543969955.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:32:35.820Z,1543969955.820 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:32:35.820Z,1543969955.820 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:32:35.820Z,1543969955.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:32:35.821Z,1543969955.821 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:34:19.660Z,1543970059.660 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T00:34:35.845Z,1543970075.845 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:34:35.845Z,1543970075.845 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-05T00:34:35.845Z,1543970075.845 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:34:35.848Z,1543970075.848 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:34:35.848Z,1543970075.848 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-05T00:34:35.848Z,1543970075.848 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:34:35.861Z,1543970075.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:34:35.861Z,1543970075.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:34:36.209Z,1543970076.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:34:36.209Z,1543970076.209 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-05T00:34:36.210Z,1543970076.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:34:36.210Z,1543970076.210 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-05T00:34:36.604Z,1543970076.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:34:36.605Z,1543970076.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:34:36.605Z,1543970076.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:34:36.605Z,1543970076.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:34:36.606Z,1543970076.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:34:36.606Z,1543970076.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:34:50.195Z,1543970090.195 [NAL9602](INFO): Powering down 2018-12-05T00:36:36.633Z,1543970196.633 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:36:36.633Z,1543970196.633 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-05T00:36:36.633Z,1543970196.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:36:36.635Z,1543970196.635 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:36:36.635Z,1543970196.635 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-05T00:36:36.635Z,1543970196.635 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:36:36.649Z,1543970196.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:36:36.649Z,1543970196.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:36:37.050Z,1543970197.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:36:37.050Z,1543970197.050 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-05T00:36:37.051Z,1543970197.051 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:36:37.051Z,1543970197.051 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-05T00:36:37.438Z,1543970197.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:36:37.438Z,1543970197.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:36:37.439Z,1543970197.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:36:37.439Z,1543970197.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:36:37.440Z,1543970197.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:36:37.440Z,1543970197.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:37:11.786Z,1543970231.786 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T00:37:11.786Z,1543970231.786 [Default:CheckIn:C.Wait] Stopped 2018-12-05T00:37:11.786Z,1543970231.786 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T00:37:11.786Z,1543970231.786 [Default:CheckIn:D] Running Loop=1 2018-12-05T00:37:12.190Z,1543970232.190 [Default:CheckIn:D] Stopped 2018-12-05T00:37:12.190Z,1543970232.190 [Default:CheckIn:E] Running Loop=1 2018-12-05T00:37:12.587Z,1543970232.587 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1642.336068 min 2018-12-05T00:37:12.587Z,1543970232.587 [Default:CheckIn:E] Stopped 2018-12-05T00:37:12.587Z,1543970232.587 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T00:37:12.587Z,1543970232.587 [Default:CheckIn] Stopped 2018-12-05T00:37:12.587Z,1543970232.587 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T00:37:12.587Z,1543970232.587 [Default:CheckIn](INFO): Running loop #160 2018-12-05T00:37:12.587Z,1543970232.587 [Default:CheckIn] Running Loop=160 2018-12-05T00:37:12.588Z,1543970232.588 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T00:37:12.588Z,1543970232.588 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T00:37:13.363Z,1543970233.363 [NAL9602](INFO): Powering up 2018-12-05T00:37:24.171Z,1543970244.171 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:37:56.116Z,1543970276.116 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T00:37:56.190Z,1543970276.190 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T00:37:56.190Z,1543970276.190 [NAL9602] Data Fault, FailCount= 1 2018-12-05T00:37:56.190Z,1543970276.190 [NAL9602](ERROR): Data Fault 2018-12-05T00:37:56.265Z,1543970276.265 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T00:37:56.516Z,1543970276.516 [NAL9602](INFO): Powering down 2018-12-05T00:37:57.370Z,1543970277.370 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T00:37:57.371Z,1543970277.371 [NAL9602] No Fault, FailCount= 1 2018-12-05T00:38:26.888Z,1543970306.888 [NAL9602](INFO): Powering up NAL9602 2018-12-05T00:38:37.722Z,1543970317.722 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:38:37.722Z,1543970317.722 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-05T00:38:37.723Z,1543970317.723 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:38:37.725Z,1543970317.725 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:38:37.725Z,1543970317.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-05T00:38:37.725Z,1543970317.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:38:37.738Z,1543970317.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:38:37.738Z,1543970317.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:38:38.088Z,1543970318.088 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:38:38.138Z,1543970318.138 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:38:38.138Z,1543970318.138 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-05T00:38:38.139Z,1543970318.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:38:38.139Z,1543970318.139 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-05T00:38:38.520Z,1543970318.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:38:38.521Z,1543970318.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:38:38.521Z,1543970318.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:38:38.521Z,1543970318.521 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:38:38.522Z,1543970318.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:38:38.522Z,1543970318.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:40:38.670Z,1543970438.670 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:40:38.671Z,1543970438.671 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-05T00:40:38.671Z,1543970438.671 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:40:38.673Z,1543970438.673 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:40:38.673Z,1543970438.673 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-05T00:40:38.673Z,1543970438.673 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:40:38.687Z,1543970438.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:40:38.687Z,1543970438.687 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:40:39.078Z,1543970439.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:40:39.078Z,1543970439.078 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-05T00:40:39.079Z,1543970439.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:40:39.079Z,1543970439.079 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-05T00:40:39.466Z,1543970439.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:40:39.466Z,1543970439.466 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:40:39.467Z,1543970439.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:40:39.467Z,1543970439.467 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:40:39.467Z,1543970439.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:40:39.468Z,1543970439.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:42:13.532Z,1543970533.532 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T00:37:12.6Z 2018-12-05T00:42:13.532Z,1543970533.532 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T00:42:13.532Z,1543970533.532 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T00:42:18.491Z,1543970538.491 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0477.lzma 2018-12-05T00:42:19.275Z,1543970539.275 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0477.lzma.bak 2018-12-05T00:42:19.275Z,1543970539.275 [DataOverHttps](INFO): SBD MOMSN=8966704 2018-12-05T00:42:28.551Z,1543970548.551 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T00:42:28.657Z,1543970548.657 [DataOverHttps](INFO): Sending 329 bytes from file Logs/20181203T211451/Express0478.lzma 2018-12-05T00:42:29.457Z,1543970549.457 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0478.lzma.bak 2018-12-05T00:42:29.457Z,1543970549.457 [DataOverHttps](INFO): SBD MOMSN=8966706 2018-12-05T00:42:30.851Z,1543970550.851 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T00:42:30.851Z,1543970550.851 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T00:42:30.851Z,1543970550.851 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T00:42:39.659Z,1543970559.659 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:42:39.659Z,1543970559.659 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-05T00:42:39.659Z,1543970559.659 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:42:39.661Z,1543970559.661 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:42:39.661Z,1543970559.661 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-05T00:42:39.661Z,1543970559.661 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:42:39.675Z,1543970559.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:42:39.675Z,1543970559.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:42:40.074Z,1543970560.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:42:40.075Z,1543970560.075 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-05T00:42:40.076Z,1543970560.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:42:40.076Z,1543970560.076 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-05T00:42:40.456Z,1543970560.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:42:40.457Z,1543970560.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:42:40.457Z,1543970560.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:42:40.457Z,1543970560.457 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:42:40.458Z,1543970560.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:42:40.458Z,1543970560.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:42:58.832Z,1543970578.832 [NAL9602](INFO): Powering down 2018-12-05T00:44:40.529Z,1543970680.529 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:44:40.529Z,1543970680.529 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-05T00:44:40.529Z,1543970680.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T00:44:40.531Z,1543970680.531 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T00:44:40.531Z,1543970680.531 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-05T00:44:40.532Z,1543970680.532 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T00:44:40.547Z,1543970680.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:44:40.547Z,1543970680.547 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T00:44:40.547Z,1543970680.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:44:40.548Z,1543970680.548 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T00:47:30.994Z,1543970850.994 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T00:47:30.995Z,1543970850.995 [Default:CheckIn:C.Wait] Stopped 2018-12-05T00:47:30.995Z,1543970850.995 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T00:47:30.995Z,1543970850.995 [Default:CheckIn:D] Running Loop=1 2018-12-05T00:47:31.391Z,1543970851.391 [Default:CheckIn:D] Stopped 2018-12-05T00:47:31.391Z,1543970851.391 [Default:CheckIn:E] Running Loop=1 2018-12-05T00:47:31.803Z,1543970851.803 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1652.656120 min 2018-12-05T00:47:31.803Z,1543970851.803 [Default:CheckIn:E] Stopped 2018-12-05T00:47:31.804Z,1543970851.804 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T00:47:31.804Z,1543970851.804 [Default:CheckIn] Stopped 2018-12-05T00:47:31.804Z,1543970851.804 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T00:47:31.804Z,1543970851.804 [Default:CheckIn](INFO): Running loop #161 2018-12-05T00:47:31.804Z,1543970851.804 [Default:CheckIn] Running Loop=161 2018-12-05T00:47:31.804Z,1543970851.804 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T00:47:31.804Z,1543970851.804 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T00:47:32.572Z,1543970852.572 [NAL9602](INFO): Powering up 2018-12-05T00:47:43.768Z,1543970863.768 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:47:44.564Z,1543970864.564 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T00:47:44.564Z,1543970864.564 [NAL9602] Data Fault, FailCount= 2 2018-12-05T00:47:44.564Z,1543970864.564 [NAL9602](ERROR): Data Fault 2018-12-05T00:47:44.622Z,1543970864.622 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T00:47:44.964Z,1543970864.964 [NAL9602](INFO): Powering down 2018-12-05T00:47:45.813Z,1543970865.813 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T00:47:45.813Z,1543970865.813 [NAL9602] No Fault, FailCount= 2 2018-12-05T00:48:15.087Z,1543970895.087 [NAL9602](INFO): Powering up NAL9602 2018-12-05T00:48:27.143Z,1543970907.143 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:51:52.444Z,1543971112.444 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T00:51:52.444Z,1543971112.444 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T00:51:52.444Z,1543971112.444 [DropWeight](ERROR): Hardware Fault 2018-12-05T00:51:52.524Z,1543971112.524 [CBIT](INFO): Critical error at 20181205T005152 2018-12-05T00:51:52.531Z,1543971112.531 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T00:51:52.531Z,1543971112.531 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T00:51:52.880Z,1543971112.880 [CBIT](INFO): Critical error at 20181205T005152 2018-12-05T00:52:33.156Z,1543971153.156 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T00:47:31.8Z 2018-12-05T00:52:33.156Z,1543971153.156 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T00:52:33.156Z,1543971153.156 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T00:52:38.240Z,1543971158.240 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0480.lzma 2018-12-05T00:52:39.041Z,1543971159.041 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0480.lzma.bak 2018-12-05T00:52:39.041Z,1543971159.041 [DataOverHttps](INFO): SBD MOMSN=8966734 2018-12-05T00:52:48.475Z,1543971168.475 [DataOverHttps](INFO): Sending 354 bytes from file Logs/20181203T211451/Express0481.lzma 2018-12-05T00:52:49.249Z,1543971169.249 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0481.lzma.bak 2018-12-05T00:52:49.249Z,1543971169.249 [DataOverHttps](INFO): SBD MOMSN=8966738 2018-12-05T00:52:50.587Z,1543971170.587 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T00:52:50.587Z,1543971170.587 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T00:52:50.587Z,1543971170.587 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T00:53:30.348Z,1543971210.348 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T00:54:01.146Z,1543971241.146 [NAL9602](INFO): Powering down 2018-12-05T00:57:50.857Z,1543971470.857 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T00:57:50.857Z,1543971470.857 [Default:CheckIn:C.Wait] Stopped 2018-12-05T00:57:50.857Z,1543971470.857 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T00:57:50.857Z,1543971470.857 [Default:CheckIn:D] Running Loop=1 2018-12-05T00:57:51.261Z,1543971471.261 [Default:CheckIn:D] Stopped 2018-12-05T00:57:51.261Z,1543971471.261 [Default:CheckIn:E] Running Loop=1 2018-12-05T00:57:51.667Z,1543971471.667 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1662.987370 min 2018-12-05T00:57:51.667Z,1543971471.667 [Default:CheckIn:E] Stopped 2018-12-05T00:57:51.668Z,1543971471.668 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T00:57:51.668Z,1543971471.668 [Default:CheckIn] Stopped 2018-12-05T00:57:51.668Z,1543971471.668 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T00:57:51.668Z,1543971471.668 [Default:CheckIn](INFO): Running loop #162 2018-12-05T00:57:51.668Z,1543971471.668 [Default:CheckIn] Running Loop=162 2018-12-05T00:57:51.668Z,1543971471.668 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T00:57:51.668Z,1543971471.668 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T00:57:52.433Z,1543971472.433 [NAL9602](INFO): Powering up 2018-12-05T00:58:03.236Z,1543971483.236 [NAL9602](INFO): NAL9602 initialized 2018-12-05T00:59:40.665Z,1543971580.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T00:59:40.665Z,1543971580.665 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-05T00:59:40.666Z,1543971580.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T00:59:40.666Z,1543971580.666 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-05T00:59:41.054Z,1543971581.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T00:59:41.055Z,1543971581.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:59:41.055Z,1543971581.055 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T00:59:41.055Z,1543971581.055 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T00:59:41.056Z,1543971581.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T00:59:41.056Z,1543971581.056 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:01:42.586Z,1543971702.586 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:01:42.587Z,1543971702.587 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-05T01:01:42.587Z,1543971702.587 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:01:42.589Z,1543971702.589 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:01:42.589Z,1543971702.589 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-05T01:01:42.589Z,1543971702.589 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:01:42.652Z,1543971702.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:01:42.652Z,1543971702.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:01:42.735Z,1543971702.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:01:42.735Z,1543971702.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-05T01:01:42.736Z,1543971702.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:01:42.736Z,1543971702.736 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-05T01:01:43.098Z,1543971703.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:01:43.099Z,1543971703.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:01:43.099Z,1543971703.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:01:43.099Z,1543971703.099 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:01:43.100Z,1543971703.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:01:43.100Z,1543971703.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:02:53.259Z,1543971773.259 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T00:57:51.7Z 2018-12-05T01:02:53.259Z,1543971773.259 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T01:02:53.259Z,1543971773.259 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T01:02:58.186Z,1543971778.186 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0483.lzma 2018-12-05T01:02:58.986Z,1543971778.986 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0483.lzma.bak 2018-12-05T01:02:58.986Z,1543971778.986 [DataOverHttps](INFO): SBD MOMSN=8966765 2018-12-05T01:03:08.369Z,1543971788.369 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T01:03:08.456Z,1543971788.456 [DataOverHttps](INFO): Sending 251 bytes from file Logs/20181203T211451/Express0484.lzma 2018-12-05T01:03:09.249Z,1543971789.249 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0484.lzma.bak 2018-12-05T01:03:09.249Z,1543971789.249 [DataOverHttps](INFO): SBD MOMSN=8966767 2018-12-05T01:03:10.597Z,1543971790.597 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T01:03:10.597Z,1543971790.597 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T01:03:10.597Z,1543971790.597 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T01:03:38.600Z,1543971818.600 [NAL9602](INFO): Powering down 2018-12-05T01:03:43.419Z,1543971823.419 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:03:43.419Z,1543971823.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-05T01:03:43.419Z,1543971823.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:03:43.421Z,1543971823.421 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:03:43.421Z,1543971823.421 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-05T01:03:43.421Z,1543971823.421 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:03:43.473Z,1543971823.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:03:43.473Z,1543971823.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:03:43.831Z,1543971823.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:03:43.831Z,1543971823.831 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-05T01:03:43.831Z,1543971823.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:03:43.831Z,1543971823.831 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-05T01:03:44.222Z,1543971824.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:03:44.223Z,1543971824.223 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:03:44.223Z,1543971824.223 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:03:44.224Z,1543971824.224 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:03:44.224Z,1543971824.224 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:03:44.225Z,1543971824.225 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:05:44.386Z,1543971944.386 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:05:44.386Z,1543971944.386 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-05T01:05:44.386Z,1543971944.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:05:44.388Z,1543971944.388 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:05:44.388Z,1543971944.388 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-05T01:05:44.388Z,1543971944.388 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:05:44.402Z,1543971944.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:05:44.403Z,1543971944.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:05:44.794Z,1543971944.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:05:44.794Z,1543971944.794 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-05T01:05:44.795Z,1543971944.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:05:44.795Z,1543971944.795 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-05T01:05:45.190Z,1543971945.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:05:45.190Z,1543971945.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:05:45.191Z,1543971945.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:05:45.191Z,1543971945.191 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:05:45.191Z,1543971945.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:05:45.192Z,1543971945.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:06:52.716Z,1543972012.716 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T01:06:52.716Z,1543972012.716 [DropWeight] No Fault, FailCount= 1 2018-12-05T01:07:45.442Z,1543972065.442 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:07:45.442Z,1543972065.442 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-05T01:07:45.442Z,1543972065.442 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:07:45.444Z,1543972065.444 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:07:45.445Z,1543972065.445 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-05T01:07:45.445Z,1543972065.445 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:07:45.506Z,1543972065.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:07:45.506Z,1543972065.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:07:45.882Z,1543972065.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:07:45.883Z,1543972065.883 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-05T01:07:45.883Z,1543972065.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:07:45.883Z,1543972065.883 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-05T01:07:46.246Z,1543972066.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:07:46.246Z,1543972066.246 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:07:46.247Z,1543972066.247 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:07:46.247Z,1543972066.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:07:46.247Z,1543972066.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:07:46.248Z,1543972066.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:08:10.785Z,1543972090.785 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T01:08:10.785Z,1543972090.785 [Default:CheckIn:C.Wait] Stopped 2018-12-05T01:08:10.785Z,1543972090.785 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T01:08:10.785Z,1543972090.785 [Default:CheckIn:D] Running Loop=1 2018-12-05T01:08:11.189Z,1543972091.189 [Default:CheckIn:D] Stopped 2018-12-05T01:08:11.189Z,1543972091.189 [Default:CheckIn:E] Running Loop=1 2018-12-05T01:08:11.590Z,1543972091.590 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1673.319401 min 2018-12-05T01:08:11.590Z,1543972091.590 [Default:CheckIn:E] Stopped 2018-12-05T01:08:11.591Z,1543972091.591 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T01:08:11.591Z,1543972091.591 [Default:CheckIn] Stopped 2018-12-05T01:08:11.591Z,1543972091.591 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T01:08:11.591Z,1543972091.591 [Default:CheckIn](INFO): Running loop #163 2018-12-05T01:08:11.591Z,1543972091.591 [Default:CheckIn] Running Loop=163 2018-12-05T01:08:11.591Z,1543972091.591 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T01:08:11.591Z,1543972091.591 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T01:08:12.356Z,1543972092.356 [NAL9602](INFO): Powering up 2018-12-05T01:08:23.556Z,1543972103.556 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:08:24.356Z,1543972104.356 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T01:08:24.356Z,1543972104.356 [NAL9602] Data Fault, FailCount= 3 2018-12-05T01:08:24.356Z,1543972104.356 [NAL9602](ERROR): Data Fault 2018-12-05T01:08:24.429Z,1543972104.429 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T01:08:24.756Z,1543972104.756 [NAL9602](INFO): Powering down 2018-12-05T01:08:25.600Z,1543972105.600 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T01:08:25.600Z,1543972105.600 [NAL9602] No Fault, FailCount= 3 2018-12-05T01:08:54.777Z,1543972134.777 [NAL9602](INFO): Powering up NAL9602 2018-12-05T01:09:06.748Z,1543972146.748 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:09:46.358Z,1543972186.358 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:09:46.358Z,1543972186.358 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-05T01:09:46.359Z,1543972186.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:09:46.361Z,1543972186.361 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:09:46.361Z,1543972186.361 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-05T01:09:46.361Z,1543972186.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:09:46.375Z,1543972186.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:09:46.375Z,1543972186.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:09:46.766Z,1543972186.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:09:46.766Z,1543972186.766 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-05T01:09:46.767Z,1543972186.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:09:46.767Z,1543972186.767 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-05T01:09:47.162Z,1543972187.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:09:47.162Z,1543972187.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:09:47.163Z,1543972187.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:09:47.163Z,1543972187.163 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:09:47.163Z,1543972187.163 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:09:47.164Z,1543972187.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:11:47.274Z,1543972307.274 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:11:47.274Z,1543972307.274 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-05T01:11:47.274Z,1543972307.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:11:47.276Z,1543972307.276 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:11:47.276Z,1543972307.276 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-05T01:11:47.277Z,1543972307.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:11:47.290Z,1543972307.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:11:47.290Z,1543972307.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:11:47.707Z,1543972307.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:11:47.707Z,1543972307.707 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-05T01:11:47.707Z,1543972307.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:11:47.707Z,1543972307.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-05T01:11:48.086Z,1543972308.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:11:48.086Z,1543972308.086 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:11:48.087Z,1543972308.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:11:48.087Z,1543972308.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:11:48.088Z,1543972308.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:11:48.088Z,1543972308.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:13:12.814Z,1543972392.814 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T01:08:11.6Z 2018-12-05T01:13:12.814Z,1543972392.814 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T01:13:12.815Z,1543972392.815 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T01:13:18.001Z,1543972398.001 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0486.lzma 2018-12-05T01:13:18.801Z,1543972398.801 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0486.lzma.bak 2018-12-05T01:13:18.801Z,1543972398.801 [DataOverHttps](INFO): SBD MOMSN=8966843 2018-12-05T01:13:28.402Z,1543972408.402 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0487.lzma 2018-12-05T01:13:29.201Z,1543972409.201 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0487.lzma.bak 2018-12-05T01:13:29.201Z,1543972409.201 [DataOverHttps](INFO): SBD MOMSN=8966845 2018-12-05T01:13:30.558Z,1543972410.558 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T01:13:30.558Z,1543972410.558 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T01:13:30.578Z,1543972410.578 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T01:13:48.110Z,1543972428.110 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:13:48.110Z,1543972428.110 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-05T01:13:48.110Z,1543972428.110 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:13:48.112Z,1543972428.112 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:13:48.112Z,1543972428.112 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-05T01:13:48.113Z,1543972428.113 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:13:48.126Z,1543972428.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:13:48.126Z,1543972428.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:13:48.515Z,1543972428.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:13:48.515Z,1543972428.515 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-05T01:13:48.515Z,1543972428.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:13:48.515Z,1543972428.515 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-05T01:13:48.886Z,1543972428.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:13:48.886Z,1543972428.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:13:48.887Z,1543972428.887 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:13:48.887Z,1543972428.887 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:13:48.887Z,1543972428.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:13:48.888Z,1543972428.888 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:14:10.167Z,1543972450.167 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T01:14:40.567Z,1543972480.567 [NAL9602](INFO): Powering down 2018-12-05T01:15:49.059Z,1543972549.059 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:15:49.059Z,1543972549.059 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-05T01:15:49.059Z,1543972549.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:15:49.061Z,1543972549.061 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:15:49.061Z,1543972549.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-05T01:15:49.061Z,1543972549.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:15:49.074Z,1543972549.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:15:49.075Z,1543972549.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:15:49.475Z,1543972549.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:15:49.475Z,1543972549.475 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-05T01:15:49.476Z,1543972549.476 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:15:49.476Z,1543972549.476 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-05T01:15:49.858Z,1543972549.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:15:49.859Z,1543972549.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:15:49.859Z,1543972549.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:15:49.860Z,1543972549.860 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:15:49.860Z,1543972549.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:15:49.860Z,1543972549.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:17:50.083Z,1543972670.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:17:50.083Z,1543972670.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-05T01:17:50.083Z,1543972670.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:17:50.085Z,1543972670.085 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:17:50.085Z,1543972670.085 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-05T01:17:50.085Z,1543972670.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:17:50.099Z,1543972670.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:17:50.099Z,1543972670.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:17:50.485Z,1543972670.485 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:17:50.485Z,1543972670.485 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-05T01:17:50.486Z,1543972670.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:17:50.486Z,1543972670.486 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-05T01:17:50.870Z,1543972670.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:17:50.871Z,1543972670.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:17:50.871Z,1543972670.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:17:50.872Z,1543972670.872 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:17:50.872Z,1543972670.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:17:50.872Z,1543972670.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:18:20.471Z,1543972700.471 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T01:18:30.899Z,1543972710.899 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T01:18:30.900Z,1543972710.900 [Default:CheckIn:C.Wait] Stopped 2018-12-05T01:18:30.900Z,1543972710.900 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T01:18:30.900Z,1543972710.900 [Default:CheckIn:D] Running Loop=1 2018-12-05T01:18:31.278Z,1543972711.278 [Default:CheckIn:D] Stopped 2018-12-05T01:18:31.278Z,1543972711.278 [Default:CheckIn:E] Running Loop=1 2018-12-05T01:18:31.673Z,1543972711.673 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1683.654297 min 2018-12-05T01:18:31.673Z,1543972711.673 [Default:CheckIn:E] Stopped 2018-12-05T01:18:31.673Z,1543972711.673 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T01:18:31.673Z,1543972711.673 [Default:CheckIn] Stopped 2018-12-05T01:18:31.673Z,1543972711.673 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T01:18:31.674Z,1543972711.674 [Default:CheckIn](INFO): Running loop #164 2018-12-05T01:18:31.674Z,1543972711.674 [Default:CheckIn] Running Loop=164 2018-12-05T01:18:31.674Z,1543972711.674 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T01:18:31.674Z,1543972711.674 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T01:18:32.451Z,1543972712.451 [NAL9602](INFO): Powering up 2018-12-05T01:18:43.656Z,1543972723.656 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:19:51.226Z,1543972791.226 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:19:51.226Z,1543972791.226 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-05T01:19:51.226Z,1543972791.226 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:19:51.228Z,1543972791.228 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:19:51.228Z,1543972791.228 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-05T01:19:51.229Z,1543972791.229 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:19:51.282Z,1543972791.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:19:51.282Z,1543972791.282 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:19:51.632Z,1543972791.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:19:51.632Z,1543972791.632 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-05T01:19:51.633Z,1543972791.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:19:51.633Z,1543972791.633 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-05T01:19:52.030Z,1543972792.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:19:52.031Z,1543972792.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:19:52.031Z,1543972792.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:19:52.031Z,1543972792.031 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:19:52.032Z,1543972792.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:19:52.032Z,1543972792.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:21:52.282Z,1543972912.282 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:21:52.283Z,1543972912.283 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-05T01:21:52.283Z,1543972912.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:21:52.285Z,1543972912.285 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:21:52.285Z,1543972912.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-05T01:21:52.285Z,1543972912.285 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:21:52.299Z,1543972912.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:21:52.299Z,1543972912.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:21:52.688Z,1543972912.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:21:52.688Z,1543972912.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-05T01:21:52.689Z,1543972912.689 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:21:52.689Z,1543972912.689 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-05T01:21:53.076Z,1543972913.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:21:53.077Z,1543972913.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:21:53.077Z,1543972913.077 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:21:53.077Z,1543972913.077 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:21:53.078Z,1543972913.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:21:53.078Z,1543972913.078 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:23:33.226Z,1543973013.226 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T01:18:31.7Z 2018-12-05T01:23:33.226Z,1543973013.226 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T01:23:33.227Z,1543973013.227 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T01:23:38.132Z,1543973018.132 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0489.lzma 2018-12-05T01:23:38.916Z,1543973018.916 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0489.lzma.bak 2018-12-05T01:23:38.916Z,1543973018.916 [DataOverHttps](INFO): SBD MOMSN=8966867 2018-12-05T01:23:48.205Z,1543973028.205 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T01:23:48.261Z,1543973028.261 [DataOverHttps](INFO): Sending 293 bytes from file Logs/20181203T211451/Express0490.lzma 2018-12-05T01:23:49.061Z,1543973029.061 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0490.lzma.bak 2018-12-05T01:23:49.061Z,1543973029.061 [DataOverHttps](INFO): SBD MOMSN=8966869 2018-12-05T01:23:50.389Z,1543973030.389 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T01:23:50.389Z,1543973030.389 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T01:23:50.389Z,1543973030.389 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T01:23:53.576Z,1543973033.576 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:23:53.576Z,1543973033.576 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-05T01:23:53.576Z,1543973033.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:23:53.578Z,1543973033.578 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:23:53.578Z,1543973033.578 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-05T01:23:53.578Z,1543973033.578 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:23:53.591Z,1543973033.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:23:53.591Z,1543973033.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:23:53.694Z,1543973033.694 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:23:53.694Z,1543973033.694 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-05T01:23:53.695Z,1543973033.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:23:53.695Z,1543973033.695 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-05T01:23:54.026Z,1543973034.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:23:54.027Z,1543973034.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:23:54.027Z,1543973034.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:23:54.027Z,1543973034.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:23:54.028Z,1543973034.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:23:54.028Z,1543973034.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:24:18.407Z,1543973058.407 [NAL9602](INFO): Powering down 2018-12-05T01:25:54.342Z,1543973154.342 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:25:54.342Z,1543973154.342 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-05T01:25:54.342Z,1543973154.342 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:25:54.344Z,1543973154.344 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:25:54.345Z,1543973154.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-05T01:25:54.345Z,1543973154.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:25:54.358Z,1543973154.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:25:54.359Z,1543973154.359 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:25:54.754Z,1543973154.754 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:25:54.754Z,1543973154.754 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-05T01:25:54.754Z,1543973154.754 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:25:54.754Z,1543973154.754 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-05T01:25:55.132Z,1543973155.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:25:55.133Z,1543973155.133 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:25:55.133Z,1543973155.133 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:25:55.134Z,1543973155.134 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:25:55.134Z,1543973155.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:25:55.134Z,1543973155.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:27:55.510Z,1543973275.510 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:27:55.510Z,1543973275.510 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-05T01:27:55.510Z,1543973275.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:27:55.513Z,1543973275.513 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:27:55.513Z,1543973275.513 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-05T01:27:55.513Z,1543973275.513 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:27:55.564Z,1543973275.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:27:55.564Z,1543973275.564 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:27:55.950Z,1543973275.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:27:55.950Z,1543973275.950 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-05T01:27:55.951Z,1543973275.951 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:27:55.951Z,1543973275.951 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-05T01:27:56.314Z,1543973276.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:27:56.314Z,1543973276.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:27:56.315Z,1543973276.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:27:56.315Z,1543973276.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:27:56.315Z,1543973276.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:27:56.316Z,1543973276.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:28:50.777Z,1543973330.777 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T01:28:50.777Z,1543973330.777 [Default:CheckIn:C.Wait] Stopped 2018-12-05T01:28:50.777Z,1543973330.777 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T01:28:50.777Z,1543973330.777 [Default:CheckIn:D] Running Loop=1 2018-12-05T01:28:51.173Z,1543973331.173 [Default:CheckIn:D] Stopped 2018-12-05T01:28:51.174Z,1543973331.174 [Default:CheckIn:E] Running Loop=1 2018-12-05T01:28:51.582Z,1543973331.582 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1693.985807 min 2018-12-05T01:28:51.582Z,1543973331.582 [Default:CheckIn:E] Stopped 2018-12-05T01:28:51.582Z,1543973331.582 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T01:28:51.582Z,1543973331.582 [Default:CheckIn] Stopped 2018-12-05T01:28:51.582Z,1543973331.582 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T01:28:51.583Z,1543973331.583 [Default:CheckIn](INFO): Running loop #165 2018-12-05T01:28:51.583Z,1543973331.583 [Default:CheckIn] Running Loop=165 2018-12-05T01:28:51.583Z,1543973331.583 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T01:28:51.583Z,1543973331.583 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T01:28:52.344Z,1543973332.344 [NAL9602](INFO): Powering up 2018-12-05T01:29:03.193Z,1543973343.193 [CBIT](IMPORTANT): Beginning ground fault scan 2018-12-05T01:29:03.544Z,1543973343.544 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:29:04.344Z,1543973344.344 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T01:29:04.344Z,1543973344.344 [NAL9602] Data Fault, FailCount= 4 2018-12-05T01:29:04.344Z,1543973344.344 [NAL9602](ERROR): Data Fault 2018-12-05T01:29:04.405Z,1543973344.405 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T01:29:04.744Z,1543973344.744 [NAL9602](INFO): Powering down 2018-12-05T01:29:05.599Z,1543973345.599 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T01:29:05.599Z,1543973345.599 [NAL9602] No Fault, FailCount= 4 2018-12-05T01:29:16.153Z,1543973356.153 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.144848 CHAN A1 (24V): 0.000944 CHAN A2 (12V): -0.005534 CHAN A3 (5V): -0.003090 CHAN B0 (3.3V): -0.000928 CHAN B1 (3.15aV): -0.001600 CHAN B2 (3.15bV): -0.001435 CHAN B3 (GND): -0.000354 OPEN: -0.001295 Full Scale Calc: 4.765 mA, -1.589 mA 2018-12-05T01:29:34.885Z,1543973374.885 [NAL9602](INFO): Powering up NAL9602 2018-12-05T01:29:46.457Z,1543973386.457 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:29:56.493Z,1543973396.493 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:29:56.493Z,1543973396.493 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-05T01:29:56.493Z,1543973396.493 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:29:56.495Z,1543973396.495 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:29:56.495Z,1543973396.495 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-05T01:29:56.495Z,1543973396.495 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:29:56.508Z,1543973396.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:29:56.509Z,1543973396.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:29:56.900Z,1543973396.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:29:56.900Z,1543973396.900 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-05T01:29:56.901Z,1543973396.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:29:56.901Z,1543973396.901 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-05T01:29:57.296Z,1543973397.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:29:57.296Z,1543973397.296 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:29:57.296Z,1543973397.296 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:29:57.297Z,1543973397.297 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:29:57.297Z,1543973397.297 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:29:57.297Z,1543973397.297 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:31:57.378Z,1543973517.378 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:31:57.378Z,1543973517.378 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-05T01:31:57.378Z,1543973517.378 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:31:57.380Z,1543973517.380 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:31:57.380Z,1543973517.380 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-05T01:31:57.381Z,1543973517.381 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:31:57.438Z,1543973517.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:31:57.438Z,1543973517.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:31:57.786Z,1543973517.786 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:31:57.787Z,1543973517.787 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-05T01:31:57.787Z,1543973517.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:31:57.787Z,1543973517.787 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-05T01:31:58.182Z,1543973518.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:31:58.183Z,1543973518.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:31:58.183Z,1543973518.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:31:58.183Z,1543973518.183 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:31:58.184Z,1543973518.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:31:58.184Z,1543973518.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:33:52.646Z,1543973632.646 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T01:28:51.6Z 2018-12-05T01:33:52.646Z,1543973632.646 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T01:33:52.647Z,1543973632.647 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T01:33:57.805Z,1543973637.805 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0492.lzma 2018-12-05T01:33:58.229Z,1543973638.229 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:33:58.229Z,1543973638.229 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-05T01:33:58.229Z,1543973638.229 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:33:58.231Z,1543973638.231 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:33:58.232Z,1543973638.232 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-05T01:33:58.232Z,1543973638.232 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:33:58.253Z,1543973638.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:33:58.254Z,1543973638.254 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:33:58.599Z,1543973638.599 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0492.lzma.bak 2018-12-05T01:33:58.599Z,1543973638.599 [DataOverHttps](INFO): SBD MOMSN=8966885 2018-12-05T01:33:58.675Z,1543973638.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:33:58.675Z,1543973638.675 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-05T01:33:58.676Z,1543973638.676 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:33:58.676Z,1543973638.676 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-05T01:33:59.953Z,1543973639.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:33:59.953Z,1543973639.953 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:33:59.954Z,1543973639.954 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:33:59.954Z,1543973639.954 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:33:59.955Z,1543973639.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:33:59.955Z,1543973639.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:34:08.085Z,1543973648.085 [DataOverHttps](INFO): Sending 486 bytes from file Logs/20181203T211451/Express0493.lzma 2018-12-05T01:34:08.865Z,1543973648.865 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0493.lzma.bak 2018-12-05T01:34:08.865Z,1543973648.865 [DataOverHttps](INFO): SBD MOMSN=8966895 2018-12-05T01:34:10.231Z,1543973650.231 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T01:34:10.232Z,1543973650.232 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T01:34:10.232Z,1543973650.232 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T01:34:49.628Z,1543973689.628 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T01:35:20.020Z,1543973720.020 [NAL9602](INFO): Powering down 2018-12-05T01:36:00.002Z,1543973760.002 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:36:00.003Z,1543973760.003 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-05T01:36:00.003Z,1543973760.003 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:36:00.005Z,1543973760.005 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:36:00.005Z,1543973760.005 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-05T01:36:00.005Z,1543973760.005 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:36:00.052Z,1543973760.052 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:36:00.053Z,1543973760.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:36:00.410Z,1543973760.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:36:00.410Z,1543973760.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-05T01:36:00.410Z,1543973760.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:36:00.410Z,1543973760.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-05T01:36:00.793Z,1543973760.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:36:00.794Z,1543973760.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:36:00.794Z,1543973760.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:36:00.794Z,1543973760.794 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:36:00.795Z,1543973760.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:36:00.795Z,1543973760.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:36:53.922Z,1543973813.922 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T01:36:53.922Z,1543973813.922 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T01:36:53.922Z,1543973813.922 [DropWeight](ERROR): Hardware Fault 2018-12-05T01:36:53.958Z,1543973813.958 [CBIT](INFO): Critical error at 20181205T013653 2018-12-05T01:36:53.961Z,1543973813.961 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T01:36:53.961Z,1543973813.961 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T01:36:54.359Z,1543973814.359 [CBIT](INFO): Critical error at 20181205T013653 2018-12-05T01:38:00.865Z,1543973880.865 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:38:00.865Z,1543973880.865 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-05T01:38:00.865Z,1543973880.865 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:38:00.867Z,1543973880.867 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:38:00.867Z,1543973880.867 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-05T01:38:00.867Z,1543973880.867 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:38:00.880Z,1543973880.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:38:00.881Z,1543973880.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:38:01.283Z,1543973881.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:38:01.283Z,1543973881.283 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-05T01:38:01.284Z,1543973881.284 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:38:01.284Z,1543973881.284 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-05T01:38:01.663Z,1543973881.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:38:01.664Z,1543973881.664 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:38:01.664Z,1543973881.664 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:38:01.664Z,1543973881.664 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:38:01.665Z,1543973881.665 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:38:01.665Z,1543973881.665 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:39:10.432Z,1543973950.432 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T01:39:10.432Z,1543973950.432 [Default:CheckIn:C.Wait] Stopped 2018-12-05T01:39:10.432Z,1543973950.432 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T01:39:10.432Z,1543973950.432 [Default:CheckIn:D] Running Loop=1 2018-12-05T01:39:10.811Z,1543973950.811 [Default:CheckIn:D] Stopped 2018-12-05T01:39:10.811Z,1543973950.811 [Default:CheckIn:E] Running Loop=1 2018-12-05T01:39:11.226Z,1543973951.226 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1704.313151 min 2018-12-05T01:39:11.227Z,1543973951.227 [Default:CheckIn:E] Stopped 2018-12-05T01:39:11.227Z,1543973951.227 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T01:39:11.227Z,1543973951.227 [Default:CheckIn] Stopped 2018-12-05T01:39:11.227Z,1543973951.227 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T01:39:11.227Z,1543973951.227 [Default:CheckIn](INFO): Running loop #166 2018-12-05T01:39:11.227Z,1543973951.227 [Default:CheckIn] Running Loop=166 2018-12-05T01:39:11.227Z,1543973951.227 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T01:39:11.227Z,1543973951.227 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T01:39:11.989Z,1543973951.989 [NAL9602](INFO): Powering up 2018-12-05T01:39:22.792Z,1543973962.792 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:39:54.759Z,1543973994.759 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T01:39:54.842Z,1543973994.842 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T01:39:54.842Z,1543973994.842 [NAL9602] Data Fault, FailCount= 5 2018-12-05T01:39:54.842Z,1543973994.842 [NAL9602](ERROR): Data Fault 2018-12-05T01:39:54.880Z,1543973994.880 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T01:39:54.881Z,1543973994.881 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T01:39:55.159Z,1543973995.159 [NAL9602](INFO): Powering down 2018-12-05T01:39:55.222Z,1543973995.222 [CBIT](INFO): Critical error at 20181205T013954 2018-12-05T01:40:01.976Z,1543974001.976 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:40:01.976Z,1543974001.976 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-05T01:40:01.976Z,1543974001.976 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:40:01.978Z,1543974001.978 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:40:01.978Z,1543974001.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-05T01:40:01.978Z,1543974001.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:40:01.992Z,1543974001.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:40:01.992Z,1543974001.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:40:02.425Z,1543974002.425 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:40:02.425Z,1543974002.425 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-05T01:40:02.426Z,1543974002.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:40:02.426Z,1543974002.426 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-05T01:40:05.640Z,1543974005.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:40:05.640Z,1543974005.640 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:40:05.640Z,1543974005.640 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:40:05.641Z,1543974005.641 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:40:05.641Z,1543974005.641 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:40:05.641Z,1543974005.641 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:41:54.945Z,1543974114.945 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T01:41:54.945Z,1543974114.945 [NAL9602] No Fault, FailCount= 5 2018-12-05T01:41:55.303Z,1543974115.303 [NAL9602](INFO): Powering up NAL9602 2018-12-05T01:42:05.726Z,1543974125.726 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:42:05.726Z,1543974125.726 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-05T01:42:05.726Z,1543974125.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:42:05.728Z,1543974125.728 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:42:05.728Z,1543974125.728 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-05T01:42:05.728Z,1543974125.728 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:42:05.741Z,1543974125.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:42:05.742Z,1543974125.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:42:06.162Z,1543974126.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:42:06.162Z,1543974126.162 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-05T01:42:06.163Z,1543974126.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:42:06.163Z,1543974126.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-05T01:42:06.503Z,1543974126.503 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:42:06.538Z,1543974126.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:42:06.539Z,1543974126.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:42:06.539Z,1543974126.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:42:06.539Z,1543974126.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:42:06.540Z,1543974126.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:42:06.540Z,1543974126.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:42:07.304Z,1543974127.304 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T01:42:07.304Z,1543974127.304 [NAL9602] Data Fault, FailCount= 1 2018-12-05T01:42:07.304Z,1543974127.304 [NAL9602](ERROR): Data Fault 2018-12-05T01:42:07.358Z,1543974127.358 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T01:42:07.703Z,1543974127.703 [NAL9602](INFO): Powering down 2018-12-05T01:42:08.546Z,1543974128.546 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T01:42:08.546Z,1543974128.546 [NAL9602] No Fault, FailCount= 1 2018-12-05T01:42:38.053Z,1543974158.053 [NAL9602](INFO): Powering up NAL9602 2018-12-05T01:42:49.255Z,1543974169.255 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:44:06.578Z,1543974246.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:44:06.578Z,1543974246.578 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-05T01:44:06.578Z,1543974246.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:44:06.580Z,1543974246.580 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:44:06.581Z,1543974246.581 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-05T01:44:06.581Z,1543974246.581 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:44:06.595Z,1543974246.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:44:06.595Z,1543974246.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:44:06.987Z,1543974246.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:44:06.987Z,1543974246.987 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-05T01:44:06.988Z,1543974246.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:44:06.988Z,1543974246.988 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-05T01:44:07.386Z,1543974247.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:44:07.386Z,1543974247.386 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:44:07.387Z,1543974247.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:44:07.387Z,1543974247.387 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:44:07.387Z,1543974247.387 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:44:07.388Z,1543974247.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:44:12.132Z,1543974252.132 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T01:39:11.2Z 2018-12-05T01:44:12.132Z,1543974252.132 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T01:44:12.132Z,1543974252.132 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T01:44:17.065Z,1543974257.065 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181203T211451/Courier0495.lzma 2018-12-05T01:44:17.865Z,1543974257.865 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0495.lzma.bak 2018-12-05T01:44:17.865Z,1543974257.865 [DataOverHttps](INFO): SBD MOMSN=8966915 2018-12-05T01:44:27.264Z,1543974267.264 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T01:44:27.352Z,1543974267.352 [DataOverHttps](INFO): Sending 357 bytes from file Logs/20181203T211451/Express0496.lzma 2018-12-05T01:44:28.121Z,1543974268.121 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0496.lzma.bak 2018-12-05T01:44:28.121Z,1543974268.121 [DataOverHttps](INFO): SBD MOMSN=8966926 2018-12-05T01:44:29.481Z,1543974269.481 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T01:44:29.482Z,1543974269.482 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T01:44:29.482Z,1543974269.482 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T01:44:57.667Z,1543974297.667 [NAL9602](INFO): Powering down 2018-12-05T01:46:07.567Z,1543974367.567 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:46:07.567Z,1543974367.567 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-05T01:46:07.567Z,1543974367.567 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:46:07.569Z,1543974367.569 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:46:07.569Z,1543974367.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-05T01:46:07.569Z,1543974367.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:46:07.583Z,1543974367.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:46:07.583Z,1543974367.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:46:07.971Z,1543974367.971 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:46:07.971Z,1543974367.971 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-05T01:46:07.972Z,1543974367.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:46:07.972Z,1543974367.972 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-05T01:46:08.366Z,1543974368.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:46:08.366Z,1543974368.366 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:46:08.367Z,1543974368.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:46:08.367Z,1543974368.367 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:46:08.367Z,1543974368.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:46:08.368Z,1543974368.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:48:08.463Z,1543974488.463 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:48:08.463Z,1543974488.463 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-05T01:48:08.463Z,1543974488.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:48:08.465Z,1543974488.465 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:48:08.465Z,1543974488.465 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-05T01:48:08.465Z,1543974488.465 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:48:08.480Z,1543974488.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:48:08.480Z,1543974488.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:48:08.882Z,1543974488.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:48:08.883Z,1543974488.883 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-05T01:48:08.883Z,1543974488.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:48:08.883Z,1543974488.883 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-05T01:48:09.265Z,1543974489.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:48:09.265Z,1543974489.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:48:09.265Z,1543974489.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:48:09.266Z,1543974489.266 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:48:09.266Z,1543974489.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:48:09.267Z,1543974489.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:49:29.729Z,1543974569.729 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T01:49:29.729Z,1543974569.729 [Default:CheckIn:C.Wait] Stopped 2018-12-05T01:49:29.729Z,1543974569.729 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T01:49:29.729Z,1543974569.729 [Default:CheckIn:D] Running Loop=1 2018-12-05T01:49:30.133Z,1543974570.133 [Default:CheckIn:D] Stopped 2018-12-05T01:49:30.133Z,1543974570.133 [Default:CheckIn:E] Running Loop=1 2018-12-05T01:49:30.518Z,1543974570.518 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1714.635156 min 2018-12-05T01:49:30.518Z,1543974570.518 [Default:CheckIn:E] Stopped 2018-12-05T01:49:30.518Z,1543974570.518 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T01:49:30.518Z,1543974570.518 [Default:CheckIn] Stopped 2018-12-05T01:49:30.518Z,1543974570.518 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T01:49:30.519Z,1543974570.519 [Default:CheckIn](INFO): Running loop #167 2018-12-05T01:49:30.519Z,1543974570.519 [Default:CheckIn] Running Loop=167 2018-12-05T01:49:30.519Z,1543974570.519 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T01:49:30.519Z,1543974570.519 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T01:49:31.298Z,1543974571.298 [NAL9602](INFO): Powering up 2018-12-05T01:49:42.098Z,1543974582.098 [NAL9602](INFO): NAL9602 initialized 2018-12-05T01:50:09.309Z,1543974609.309 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:50:09.309Z,1543974609.309 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-05T01:50:09.309Z,1543974609.309 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:50:09.312Z,1543974609.312 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:50:09.312Z,1543974609.312 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-05T01:50:09.312Z,1543974609.312 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:50:09.338Z,1543974609.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:50:09.338Z,1543974609.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:50:09.735Z,1543974609.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:50:09.735Z,1543974609.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-05T01:50:09.736Z,1543974609.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:50:09.736Z,1543974609.736 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-05T01:50:10.113Z,1543974610.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:50:10.114Z,1543974610.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:50:10.114Z,1543974610.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:50:10.115Z,1543974610.115 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:50:10.115Z,1543974610.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:50:10.115Z,1543974610.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:51:54.214Z,1543974714.214 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T01:51:54.214Z,1543974714.214 [DropWeight] No Fault, FailCount= 1 2018-12-05T01:52:10.472Z,1543974730.472 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:52:10.472Z,1543974730.472 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-05T01:52:10.472Z,1543974730.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:52:10.474Z,1543974730.474 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:52:10.474Z,1543974730.474 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-05T01:52:10.475Z,1543974730.475 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:52:10.488Z,1543974730.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:52:10.488Z,1543974730.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:52:10.615Z,1543974730.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:52:10.615Z,1543974730.615 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-05T01:52:10.615Z,1543974730.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:52:10.615Z,1543974730.615 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-05T01:52:10.926Z,1543974730.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:52:10.927Z,1543974730.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:52:10.927Z,1543974730.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:52:10.928Z,1543974730.928 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:52:10.928Z,1543974730.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:52:10.928Z,1543974730.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:54:10.987Z,1543974850.987 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:54:10.987Z,1543974850.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-05T01:54:10.987Z,1543974850.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:54:10.989Z,1543974850.989 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:54:10.989Z,1543974850.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-05T01:54:10.990Z,1543974850.990 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:54:11.004Z,1543974851.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:54:11.004Z,1543974851.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:54:11.415Z,1543974851.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:54:11.415Z,1543974851.415 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-05T01:54:11.416Z,1543974851.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:54:11.416Z,1543974851.416 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-05T01:54:11.795Z,1543974851.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:54:11.795Z,1543974851.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:54:11.795Z,1543974851.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:54:11.796Z,1543974851.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:54:11.796Z,1543974851.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:54:11.797Z,1543974851.797 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:54:31.356Z,1543974871.356 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T01:49:30.5Z 2018-12-05T01:54:31.356Z,1543974871.356 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T01:54:31.356Z,1543974871.356 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T01:54:41.109Z,1543974881.109 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0498.lzma 2018-12-05T01:54:41.909Z,1543974881.909 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0498.lzma.bak 2018-12-05T01:54:41.909Z,1543974881.909 [DataOverHttps](INFO): SBD MOMSN=8966947 2018-12-05T01:54:46.635Z,1543974886.635 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T01:54:51.964Z,1543974891.964 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0499.lzma 2018-12-05T01:54:52.457Z,1543974892.457 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0499.lzma.bak 2018-12-05T01:54:52.457Z,1543974892.457 [DataOverHttps](INFO): SBD MOMSN=8966953 2018-12-05T01:54:53.786Z,1543974893.786 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T01:54:53.786Z,1543974893.786 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T01:54:53.786Z,1543974893.786 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T01:55:16.991Z,1543974916.991 [NAL9602](INFO): Powering down 2018-12-05T01:56:11.947Z,1543974971.947 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:56:11.947Z,1543974971.947 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-05T01:56:11.947Z,1543974971.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:56:11.949Z,1543974971.949 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:56:11.949Z,1543974971.949 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-05T01:56:11.949Z,1543974971.949 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:56:11.962Z,1543974971.962 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:56:11.963Z,1543974971.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:56:12.378Z,1543974972.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:56:12.378Z,1543974972.378 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-05T01:56:12.383Z,1543974972.383 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:56:12.383Z,1543974972.383 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-05T01:56:12.754Z,1543974972.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:56:12.755Z,1543974972.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:56:12.755Z,1543974972.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:56:12.755Z,1543974972.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:56:12.756Z,1543974972.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:56:12.756Z,1543974972.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:58:13.070Z,1543975093.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:58:13.070Z,1543975093.070 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-05T01:58:13.070Z,1543975093.070 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T01:58:13.072Z,1543975093.072 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T01:58:13.072Z,1543975093.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-05T01:58:13.073Z,1543975093.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T01:58:13.086Z,1543975093.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T01:58:13.086Z,1543975093.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T01:58:13.482Z,1543975093.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T01:58:13.482Z,1543975093.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-05T01:58:13.482Z,1543975093.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T01:58:13.482Z,1543975093.482 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-05T01:58:13.870Z,1543975093.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T01:58:13.870Z,1543975093.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:58:13.871Z,1543975093.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:58:13.871Z,1543975093.871 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T01:58:13.871Z,1543975093.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T01:58:13.872Z,1543975093.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T01:59:54.046Z,1543975194.046 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T01:59:54.046Z,1543975194.046 [Default:CheckIn:C.Wait] Stopped 2018-12-05T01:59:54.046Z,1543975194.046 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T01:59:54.046Z,1543975194.046 [Default:CheckIn:D] Running Loop=1 2018-12-05T01:59:54.446Z,1543975194.446 [Default:CheckIn:D] Stopped 2018-12-05T01:59:54.446Z,1543975194.446 [Default:CheckIn:E] Running Loop=1 2018-12-05T01:59:54.838Z,1543975194.838 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1725.040365 min 2018-12-05T01:59:54.839Z,1543975194.839 [Default:CheckIn:E] Stopped 2018-12-05T01:59:54.839Z,1543975194.839 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T01:59:54.839Z,1543975194.839 [Default:CheckIn] Stopped 2018-12-05T01:59:54.839Z,1543975194.839 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T01:59:54.839Z,1543975194.839 [Default:CheckIn](INFO): Running loop #168 2018-12-05T01:59:54.839Z,1543975194.839 [Default:CheckIn] Running Loop=168 2018-12-05T01:59:54.839Z,1543975194.839 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T01:59:54.839Z,1543975194.839 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T01:59:55.612Z,1543975195.612 [NAL9602](INFO): Powering up 2018-12-05T02:00:06.812Z,1543975206.812 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:00:07.612Z,1543975207.612 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T02:00:07.612Z,1543975207.612 [NAL9602] Data Fault, FailCount= 2 2018-12-05T02:00:07.612Z,1543975207.612 [NAL9602](ERROR): Data Fault 2018-12-05T02:00:07.680Z,1543975207.680 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T02:00:08.012Z,1543975208.012 [NAL9602](INFO): Powering down 2018-12-05T02:00:08.860Z,1543975208.860 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T02:00:08.861Z,1543975208.861 [NAL9602] No Fault, FailCount= 2 2018-12-05T02:00:14.397Z,1543975214.397 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:00:14.397Z,1543975214.397 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-05T02:00:14.397Z,1543975214.397 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:00:14.399Z,1543975214.399 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:00:14.399Z,1543975214.399 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-05T02:00:14.399Z,1543975214.399 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:00:14.413Z,1543975214.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:00:14.413Z,1543975214.413 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:00:14.546Z,1543975214.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:00:14.546Z,1543975214.546 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-05T02:00:14.547Z,1543975214.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:00:14.547Z,1543975214.547 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-05T02:00:14.847Z,1543975214.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:00:14.848Z,1543975214.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:00:14.848Z,1543975214.848 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:00:14.848Z,1543975214.848 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:00:14.849Z,1543975214.849 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:00:14.849Z,1543975214.849 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:00:38.028Z,1543975238.028 [NAL9602](INFO): Powering up NAL9602 2018-12-05T02:00:50.004Z,1543975250.004 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:02:15.065Z,1543975335.065 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:02:15.065Z,1543975335.065 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-05T02:02:15.065Z,1543975335.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:02:15.067Z,1543975335.067 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:02:15.067Z,1543975335.067 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-05T02:02:15.067Z,1543975335.067 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:02:15.080Z,1543975335.080 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:02:15.081Z,1543975335.081 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:02:15.482Z,1543975335.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:02:15.482Z,1543975335.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-05T02:02:15.482Z,1543975335.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:02:15.482Z,1543975335.482 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-05T02:02:15.870Z,1543975335.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:02:15.870Z,1543975335.870 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:02:15.871Z,1543975335.871 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:02:15.871Z,1543975335.871 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:02:15.872Z,1543975335.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:02:15.872Z,1543975335.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:04:15.874Z,1543975455.874 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:04:15.874Z,1543975455.875 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-05T02:04:15.875Z,1543975455.875 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:04:15.877Z,1543975455.877 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:04:15.877Z,1543975455.877 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-05T02:04:15.877Z,1543975455.877 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:04:15.891Z,1543975455.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:04:15.891Z,1543975455.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:04:16.290Z,1543975456.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:04:16.290Z,1543975456.290 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-05T02:04:16.291Z,1543975456.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:04:16.291Z,1543975456.291 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-05T02:04:16.674Z,1543975456.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:04:16.674Z,1543975456.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:04:16.675Z,1543975456.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:04:16.686Z,1543975456.686 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:04:16.687Z,1543975456.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:04:16.687Z,1543975456.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:04:56.301Z,1543975496.301 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T01:59:54.8Z 2018-12-05T02:04:56.301Z,1543975496.301 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T02:04:56.301Z,1543975496.301 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T02:05:01.376Z,1543975501.376 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0501.lzma 2018-12-05T02:05:02.163Z,1543975502.163 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0501.lzma.bak 2018-12-05T02:05:02.164Z,1543975502.164 [DataOverHttps](INFO): SBD MOMSN=8966970 2018-12-05T02:05:11.637Z,1543975511.637 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0502.lzma 2018-12-05T02:05:12.437Z,1543975512.437 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0502.lzma.bak 2018-12-05T02:05:12.437Z,1543975512.437 [DataOverHttps](INFO): SBD MOMSN=8966976 2018-12-05T02:05:13.826Z,1543975513.826 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T02:05:13.826Z,1543975513.826 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T02:05:13.827Z,1543975513.827 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T02:05:53.476Z,1543975553.476 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T02:06:16.698Z,1543975576.698 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:06:16.698Z,1543975576.698 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-05T02:06:16.698Z,1543975576.698 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:06:16.700Z,1543975576.700 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:06:16.700Z,1543975576.700 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-05T02:06:16.701Z,1543975576.701 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:06:16.714Z,1543975576.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:06:16.714Z,1543975576.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:06:17.104Z,1543975577.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:06:17.104Z,1543975577.104 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-05T02:06:17.105Z,1543975577.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:06:17.105Z,1543975577.105 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-05T02:06:17.498Z,1543975577.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:06:17.499Z,1543975577.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:06:17.499Z,1543975577.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:06:17.499Z,1543975577.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:06:17.500Z,1543975577.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:06:17.500Z,1543975577.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:06:23.868Z,1543975583.868 [NAL9602](INFO): Powering down 2018-12-05T02:08:17.627Z,1543975697.627 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:08:17.627Z,1543975697.627 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-05T02:08:17.627Z,1543975697.627 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:08:17.629Z,1543975697.629 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:08:17.629Z,1543975697.629 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-05T02:08:17.629Z,1543975697.629 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:08:17.643Z,1543975697.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:08:17.643Z,1543975697.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:08:18.038Z,1543975698.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:08:18.038Z,1543975698.038 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-05T02:08:18.039Z,1543975698.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:08:18.039Z,1543975698.039 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-05T02:08:18.430Z,1543975698.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:08:18.431Z,1543975698.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:08:18.431Z,1543975698.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:08:18.431Z,1543975698.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:08:18.432Z,1543975698.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:08:18.432Z,1543975698.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:10:14.066Z,1543975814.066 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T02:10:14.066Z,1543975814.066 [Default:CheckIn:C.Wait] Stopped 2018-12-05T02:10:14.066Z,1543975814.066 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T02:10:14.066Z,1543975814.066 [Default:CheckIn:D] Running Loop=1 2018-12-05T02:10:14.466Z,1543975814.466 [Default:CheckIn:D] Stopped 2018-12-05T02:10:14.466Z,1543975814.466 [Default:CheckIn:E] Running Loop=1 2018-12-05T02:10:14.858Z,1543975814.858 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1735.374089 min 2018-12-05T02:10:14.859Z,1543975814.859 [Default:CheckIn:E] Stopped 2018-12-05T02:10:14.859Z,1543975814.859 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T02:10:14.859Z,1543975814.859 [Default:CheckIn] Stopped 2018-12-05T02:10:14.859Z,1543975814.859 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T02:10:14.859Z,1543975814.859 [Default:CheckIn](INFO): Running loop #169 2018-12-05T02:10:14.859Z,1543975814.859 [Default:CheckIn] Running Loop=169 2018-12-05T02:10:14.859Z,1543975814.859 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T02:10:14.860Z,1543975814.860 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T02:10:15.631Z,1543975815.631 [NAL9602](INFO): Powering up 2018-12-05T02:10:18.462Z,1543975818.462 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:10:18.462Z,1543975818.462 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-05T02:10:18.462Z,1543975818.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:10:18.464Z,1543975818.464 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:10:18.464Z,1543975818.464 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-05T02:10:18.465Z,1543975818.465 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:10:18.478Z,1543975818.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:10:18.478Z,1543975818.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:10:18.873Z,1543975818.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:10:18.873Z,1543975818.873 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-05T02:10:18.874Z,1543975818.874 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:10:18.874Z,1543975818.874 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-05T02:10:19.262Z,1543975819.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:10:19.262Z,1543975819.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:10:19.263Z,1543975819.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:10:19.263Z,1543975819.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:10:19.263Z,1543975819.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:10:19.264Z,1543975819.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:10:26.832Z,1543975826.832 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:12:20.026Z,1543975940.026 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:12:20.027Z,1543975940.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-05T02:12:20.027Z,1543975940.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:12:20.029Z,1543975940.029 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:12:20.029Z,1543975940.029 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-05T02:12:20.029Z,1543975940.029 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:12:20.043Z,1543975940.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:12:20.043Z,1543975940.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:12:20.161Z,1543975940.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:12:20.161Z,1543975940.161 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-05T02:12:20.161Z,1543975940.161 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:12:20.161Z,1543975940.161 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-05T02:12:20.490Z,1543975940.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:12:20.490Z,1543975940.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:12:20.491Z,1543975940.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:12:20.491Z,1543975940.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:12:20.491Z,1543975940.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:12:20.492Z,1543975940.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:14:20.711Z,1543976060.711 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:14:20.711Z,1543976060.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-05T02:14:20.711Z,1543976060.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:14:20.713Z,1543976060.713 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:14:20.713Z,1543976060.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-05T02:14:20.714Z,1543976060.714 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:14:20.727Z,1543976060.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:14:20.727Z,1543976060.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:14:21.142Z,1543976061.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:14:21.143Z,1543976061.143 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-05T02:14:21.143Z,1543976061.143 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:14:21.143Z,1543976061.143 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-05T02:14:21.517Z,1543976061.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:14:21.518Z,1543976061.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:14:21.518Z,1543976061.518 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:14:21.519Z,1543976061.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:14:21.519Z,1543976061.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:14:21.519Z,1543976061.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:15:16.227Z,1543976116.227 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T02:10:14.9Z 2018-12-05T02:15:16.227Z,1543976116.227 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T02:15:16.227Z,1543976116.227 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T02:15:21.288Z,1543976121.288 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0504.lzma 2018-12-05T02:15:22.065Z,1543976122.065 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0504.lzma.bak 2018-12-05T02:15:22.065Z,1543976122.065 [DataOverHttps](INFO): SBD MOMSN=8966995 2018-12-05T02:15:31.458Z,1543976131.458 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T02:15:31.514Z,1543976131.514 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0505.lzma 2018-12-05T02:15:32.313Z,1543976132.313 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0505.lzma.bak 2018-12-05T02:15:32.313Z,1543976132.313 [DataOverHttps](INFO): SBD MOMSN=8967002 2018-12-05T02:15:33.642Z,1543976133.642 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T02:15:33.642Z,1543976133.642 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T02:15:33.643Z,1543976133.643 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T02:16:01.615Z,1543976161.615 [NAL9602](INFO): Powering down 2018-12-05T02:16:21.663Z,1543976181.663 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:16:21.664Z,1543976181.664 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-05T02:16:21.664Z,1543976181.664 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:16:21.666Z,1543976181.666 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:16:21.666Z,1543976181.666 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-05T02:16:21.666Z,1543976181.666 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:16:21.679Z,1543976181.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:16:21.680Z,1543976181.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:16:22.067Z,1543976182.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:16:22.067Z,1543976182.067 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-05T02:16:22.067Z,1543976182.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:16:22.067Z,1543976182.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-05T02:16:22.442Z,1543976182.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:16:22.443Z,1543976182.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:16:22.443Z,1543976182.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:16:22.443Z,1543976182.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:16:22.444Z,1543976182.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:16:22.444Z,1543976182.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:18:22.822Z,1543976302.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:18:22.822Z,1543976302.822 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-05T02:18:22.822Z,1543976302.822 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:18:22.824Z,1543976302.824 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:18:22.824Z,1543976302.824 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-05T02:18:22.824Z,1543976302.824 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:18:22.837Z,1543976302.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:18:22.838Z,1543976302.838 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:18:23.239Z,1543976303.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:18:23.239Z,1543976303.239 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-05T02:18:23.240Z,1543976303.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:18:23.240Z,1543976303.240 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-05T02:18:23.622Z,1543976303.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:18:23.636Z,1543976303.636 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:18:23.637Z,1543976303.637 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:18:23.637Z,1543976303.637 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:18:23.637Z,1543976303.637 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:18:23.638Z,1543976303.638 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:20:23.868Z,1543976423.868 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:20:23.868Z,1543976423.868 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-05T02:20:23.868Z,1543976423.868 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:20:23.870Z,1543976423.870 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:20:23.870Z,1543976423.870 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-05T02:20:23.870Z,1543976423.870 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:20:23.884Z,1543976423.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:20:23.884Z,1543976423.884 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:20:24.214Z,1543976424.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:20:24.214Z,1543976424.214 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-05T02:20:24.215Z,1543976424.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:20:24.215Z,1543976424.215 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-05T02:20:24.602Z,1543976424.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:20:24.602Z,1543976424.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:20:24.603Z,1543976424.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:20:24.603Z,1543976424.603 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:20:24.604Z,1543976424.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:20:24.604Z,1543976424.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:20:33.790Z,1543976433.790 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T02:20:33.791Z,1543976433.791 [Default:CheckIn:C.Wait] Stopped 2018-12-05T02:20:33.791Z,1543976433.791 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T02:20:33.791Z,1543976433.791 [Default:CheckIn:D] Running Loop=1 2018-12-05T02:20:34.191Z,1543976434.191 [Default:CheckIn:D] Stopped 2018-12-05T02:20:34.191Z,1543976434.191 [Default:CheckIn:E] Running Loop=1 2018-12-05T02:20:34.590Z,1543976434.590 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1745.702865 min 2018-12-05T02:20:34.591Z,1543976434.591 [Default:CheckIn:E] Stopped 2018-12-05T02:20:34.591Z,1543976434.591 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T02:20:34.591Z,1543976434.591 [Default:CheckIn] Stopped 2018-12-05T02:20:34.591Z,1543976434.591 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T02:20:34.591Z,1543976434.591 [Default:CheckIn](INFO): Running loop #170 2018-12-05T02:20:34.591Z,1543976434.591 [Default:CheckIn] Running Loop=170 2018-12-05T02:20:34.591Z,1543976434.591 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T02:20:34.591Z,1543976434.591 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T02:20:35.351Z,1543976435.351 [NAL9602](INFO): Powering up 2018-12-05T02:20:46.553Z,1543976446.553 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:20:47.352Z,1543976447.352 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T02:20:47.352Z,1543976447.352 [NAL9602] Data Fault, FailCount= 3 2018-12-05T02:20:47.352Z,1543976447.352 [NAL9602](ERROR): Data Fault 2018-12-05T02:20:47.436Z,1543976447.436 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T02:20:47.756Z,1543976447.756 [NAL9602](INFO): Powering down 2018-12-05T02:20:48.612Z,1543976448.612 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T02:20:48.612Z,1543976448.612 [NAL9602] No Fault, FailCount= 3 2018-12-05T02:21:17.776Z,1543976477.776 [NAL9602](INFO): Powering up NAL9602 2018-12-05T02:21:29.340Z,1543976489.340 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:21:55.742Z,1543976515.742 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T02:21:55.743Z,1543976515.743 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T02:21:55.743Z,1543976515.743 [DropWeight](ERROR): Hardware Fault 2018-12-05T02:21:55.779Z,1543976515.779 [CBIT](INFO): Critical error at 20181205T022155 2018-12-05T02:21:55.782Z,1543976515.782 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T02:21:55.782Z,1543976515.782 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T02:21:56.184Z,1543976516.184 [CBIT](INFO): Critical error at 20181205T022155 2018-12-05T02:22:24.998Z,1543976544.998 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:22:24.998Z,1543976544.998 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-05T02:22:24.998Z,1543976544.998 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:22:25.000Z,1543976545.000 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:22:25.001Z,1543976545.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-05T02:22:25.001Z,1543976545.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:22:25.038Z,1543976545.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:22:25.039Z,1543976545.039 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:22:25.427Z,1543976545.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:22:25.427Z,1543976545.427 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-05T02:22:25.428Z,1543976545.428 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:22:25.428Z,1543976545.428 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-05T02:22:25.786Z,1543976545.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:22:25.786Z,1543976545.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:22:25.787Z,1543976545.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:22:25.787Z,1543976545.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:22:25.788Z,1543976545.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:22:25.788Z,1543976545.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:24:25.978Z,1543976665.978 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:24:25.978Z,1543976665.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-05T02:24:25.979Z,1543976665.979 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:24:25.981Z,1543976665.981 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:24:25.981Z,1543976665.981 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-05T02:24:25.981Z,1543976665.981 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:24:26.026Z,1543976666.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:24:26.026Z,1543976666.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:24:26.407Z,1543976666.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:24:26.407Z,1543976666.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-05T02:24:26.408Z,1543976666.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:24:26.408Z,1543976666.408 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-05T02:24:26.770Z,1543976666.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:24:26.770Z,1543976666.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:24:26.771Z,1543976666.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:24:26.771Z,1543976666.771 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:24:26.771Z,1543976666.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:24:26.772Z,1543976666.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:25:35.755Z,1543976735.755 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T02:20:34.6Z 2018-12-05T02:25:35.755Z,1543976735.755 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T02:25:35.755Z,1543976735.755 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T02:25:40.877Z,1543976740.877 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0507.lzma 2018-12-05T02:25:41.677Z,1543976741.677 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0507.lzma.bak 2018-12-05T02:25:41.678Z,1543976741.678 [DataOverHttps](INFO): SBD MOMSN=8967018 2018-12-05T02:25:51.080Z,1543976751.080 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0508.lzma 2018-12-05T02:25:52.000Z,1543976752.000 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0508.lzma.bak 2018-12-05T02:25:52.000Z,1543976752.000 [DataOverHttps](INFO): SBD MOMSN=8967027 2018-12-05T02:25:53.297Z,1543976753.297 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T02:25:53.297Z,1543976753.297 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T02:25:53.297Z,1543976753.297 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T02:25:53.402Z,1543976753.402 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T02:26:27.082Z,1543976787.082 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:26:27.082Z,1543976787.082 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-05T02:26:27.083Z,1543976787.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:26:27.085Z,1543976787.085 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:26:27.085Z,1543976787.085 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-05T02:26:27.085Z,1543976787.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:26:27.098Z,1543976787.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:26:27.098Z,1543976787.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:26:27.514Z,1543976787.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:26:27.514Z,1543976787.514 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-05T02:26:27.515Z,1543976787.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:26:27.515Z,1543976787.515 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-05T02:26:27.895Z,1543976787.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:26:27.895Z,1543976787.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:26:27.896Z,1543976787.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:26:27.896Z,1543976787.896 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:26:27.896Z,1543976787.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:26:27.897Z,1543976787.897 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:26:32.219Z,1543976792.219 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T02:27:03.023Z,1543976823.023 [NAL9602](INFO): Powering down 2018-12-05T02:28:28.098Z,1543976908.098 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:28:28.098Z,1543976908.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-05T02:28:28.098Z,1543976908.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:28:28.100Z,1543976908.100 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:28:28.100Z,1543976908.100 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-05T02:28:28.100Z,1543976908.100 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:28:28.114Z,1543976908.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:28:28.114Z,1543976908.114 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:28:28.508Z,1543976908.508 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:28:28.509Z,1543976908.509 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-05T02:28:28.509Z,1543976908.509 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:28:28.509Z,1543976908.509 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-05T02:28:28.894Z,1543976908.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:28:28.895Z,1543976908.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:28:28.895Z,1543976908.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:28:28.895Z,1543976908.895 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:28:28.896Z,1543976908.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:28:28.896Z,1543976908.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:30:29.071Z,1543977029.071 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:30:29.071Z,1543977029.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-05T02:30:29.071Z,1543977029.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:30:29.073Z,1543977029.073 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:30:29.073Z,1543977029.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-05T02:30:29.074Z,1543977029.074 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:30:29.087Z,1543977029.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:30:29.087Z,1543977029.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:30:29.490Z,1543977029.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:30:29.490Z,1543977029.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-05T02:30:29.491Z,1543977029.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:30:29.491Z,1543977029.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-05T02:30:29.868Z,1543977029.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:30:29.869Z,1543977029.869 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:30:29.869Z,1543977029.869 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:30:29.869Z,1543977029.869 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:30:29.870Z,1543977029.870 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:30:29.870Z,1543977029.870 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:30:53.830Z,1543977053.830 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T02:30:53.830Z,1543977053.830 [Default:CheckIn:C.Wait] Stopped 2018-12-05T02:30:53.830Z,1543977053.830 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T02:30:53.830Z,1543977053.830 [Default:CheckIn:D] Running Loop=1 2018-12-05T02:30:54.227Z,1543977054.227 [Default:CheckIn:D] Stopped 2018-12-05T02:30:54.227Z,1543977054.227 [Default:CheckIn:E] Running Loop=1 2018-12-05T02:30:54.624Z,1543977054.624 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1756.036719 min 2018-12-05T02:30:54.624Z,1543977054.624 [Default:CheckIn:E] Stopped 2018-12-05T02:30:54.624Z,1543977054.624 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T02:30:54.624Z,1543977054.624 [Default:CheckIn] Stopped 2018-12-05T02:30:54.624Z,1543977054.624 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T02:30:54.625Z,1543977054.625 [Default:CheckIn](INFO): Running loop #171 2018-12-05T02:30:54.625Z,1543977054.625 [Default:CheckIn] Running Loop=171 2018-12-05T02:30:54.625Z,1543977054.625 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T02:30:54.625Z,1543977054.625 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T02:30:55.395Z,1543977055.395 [NAL9602](INFO): Powering up 2018-12-05T02:31:06.595Z,1543977066.595 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:31:38.561Z,1543977098.561 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T02:31:38.639Z,1543977098.639 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T02:31:38.639Z,1543977098.639 [NAL9602] Data Fault, FailCount= 4 2018-12-05T02:31:38.639Z,1543977098.639 [NAL9602](ERROR): Data Fault 2018-12-05T02:31:38.678Z,1543977098.678 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T02:31:38.971Z,1543977098.971 [NAL9602](INFO): Powering down 2018-12-05T02:31:39.819Z,1543977099.819 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T02:31:39.819Z,1543977099.819 [NAL9602] No Fault, FailCount= 4 2018-12-05T02:32:09.327Z,1543977129.327 [NAL9602](INFO): Powering up NAL9602 2018-12-05T02:32:20.536Z,1543977140.536 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:32:23.903Z,1543977143.903 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T02:32:23.904Z,1543977143.904 [NAL9602] Data Fault, FailCount= 5 2018-12-05T02:32:23.904Z,1543977143.904 [NAL9602](ERROR): Data Fault 2018-12-05T02:32:23.940Z,1543977143.940 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T02:32:23.940Z,1543977143.940 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T02:32:24.251Z,1543977144.251 [NAL9602](INFO): Powering down 2018-12-05T02:32:24.302Z,1543977144.302 [CBIT](INFO): Critical error at 20181205T023223 2018-12-05T02:32:29.873Z,1543977149.873 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:32:29.873Z,1543977149.873 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-05T02:32:29.873Z,1543977149.873 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:32:29.875Z,1543977149.875 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:32:29.875Z,1543977149.875 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-05T02:32:29.875Z,1543977149.875 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:32:29.889Z,1543977149.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:32:29.889Z,1543977149.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:32:30.289Z,1543977150.289 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:32:30.289Z,1543977150.289 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-05T02:32:30.290Z,1543977150.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:32:30.290Z,1543977150.290 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-05T02:32:30.680Z,1543977150.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:32:30.680Z,1543977150.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:32:30.681Z,1543977150.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:32:30.681Z,1543977150.681 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:32:30.682Z,1543977150.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:32:30.682Z,1543977150.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:34:24.263Z,1543977264.263 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T02:34:24.263Z,1543977264.263 [NAL9602] No Fault, FailCount= 5 2018-12-05T02:34:24.607Z,1543977264.607 [NAL9602](INFO): Powering up NAL9602 2018-12-05T02:34:31.024Z,1543977271.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:34:31.024Z,1543977271.024 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-05T02:34:31.024Z,1543977271.024 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:34:31.026Z,1543977271.026 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:34:31.026Z,1543977271.026 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-05T02:34:31.026Z,1543977271.026 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:34:31.056Z,1543977271.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:34:31.056Z,1543977271.056 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:34:31.461Z,1543977271.461 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:34:31.462Z,1543977271.462 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-05T02:34:31.462Z,1543977271.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:34:31.462Z,1543977271.462 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-05T02:34:31.826Z,1543977271.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:34:31.827Z,1543977271.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:34:31.827Z,1543977271.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:34:31.828Z,1543977271.828 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:34:31.828Z,1543977271.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:34:31.828Z,1543977271.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:34:35.807Z,1543977275.807 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:35:55.103Z,1543977355.103 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T02:30:54.6Z 2018-12-05T02:35:55.103Z,1543977355.103 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T02:35:55.103Z,1543977355.103 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T02:36:00.073Z,1543977360.073 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20181203T211451/Courier0510.lzma 2018-12-05T02:36:00.865Z,1543977360.865 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0510.lzma.bak 2018-12-05T02:36:00.865Z,1543977360.865 [DataOverHttps](INFO): SBD MOMSN=8967042 2018-12-05T02:36:10.211Z,1543977370.211 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T02:36:15.066Z,1543977375.066 [DataOverHttps](INFO): Sending 346 bytes from file Logs/20181203T211451/Express0511.lzma 2018-12-05T02:36:15.838Z,1543977375.838 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0511.lzma.bak 2018-12-05T02:36:15.838Z,1543977375.838 [DataOverHttps](INFO): SBD MOMSN=8967049 2018-12-05T02:36:17.165Z,1543977377.165 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T02:36:17.165Z,1543977377.165 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T02:36:17.165Z,1543977377.165 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T02:36:31.957Z,1543977391.957 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:36:31.957Z,1543977391.957 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-05T02:36:31.958Z,1543977391.958 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:36:31.960Z,1543977391.960 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:36:31.960Z,1543977391.960 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-05T02:36:31.960Z,1543977391.960 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:36:31.973Z,1543977391.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:36:31.973Z,1543977391.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:36:32.366Z,1543977392.366 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:36:32.366Z,1543977392.366 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-05T02:36:32.367Z,1543977392.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:36:32.367Z,1543977392.367 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-05T02:36:32.758Z,1543977392.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:36:32.758Z,1543977392.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:36:32.759Z,1543977392.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:36:32.759Z,1543977392.759 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:36:32.759Z,1543977392.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:36:32.760Z,1543977392.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:36:40.338Z,1543977400.338 [NAL9602](INFO): Powering down 2018-12-05T02:36:56.030Z,1543977416.030 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T02:36:56.030Z,1543977416.030 [DropWeight] No Fault, FailCount= 1 2018-12-05T02:38:32.918Z,1543977512.918 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:38:32.918Z,1543977512.918 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-05T02:38:32.918Z,1543977512.918 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:38:32.931Z,1543977512.931 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:38:32.931Z,1543977512.931 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-05T02:38:32.931Z,1543977512.931 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:38:32.944Z,1543977512.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:38:32.944Z,1543977512.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:38:33.345Z,1543977513.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:38:33.345Z,1543977513.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-05T02:38:33.346Z,1543977513.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:38:33.346Z,1543977513.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-05T02:38:33.729Z,1543977513.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:38:33.730Z,1543977513.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:38:33.730Z,1543977513.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:38:33.731Z,1543977513.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:38:33.731Z,1543977513.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:38:33.731Z,1543977513.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:40:33.754Z,1543977633.754 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:40:33.754Z,1543977633.754 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-05T02:40:33.755Z,1543977633.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:40:33.757Z,1543977633.757 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:40:33.757Z,1543977633.757 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-05T02:40:33.757Z,1543977633.757 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:40:33.772Z,1543977633.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:40:33.772Z,1543977633.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:40:34.162Z,1543977634.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:40:34.162Z,1543977634.162 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-05T02:40:34.163Z,1543977634.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:40:34.163Z,1543977634.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-05T02:40:34.554Z,1543977634.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:40:34.555Z,1543977634.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:40:34.555Z,1543977634.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:40:34.555Z,1543977634.555 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:40:34.556Z,1543977634.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:40:34.556Z,1543977634.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:41:17.557Z,1543977677.557 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T02:41:17.557Z,1543977677.557 [Default:CheckIn:C.Wait] Stopped 2018-12-05T02:41:17.557Z,1543977677.557 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T02:41:17.557Z,1543977677.557 [Default:CheckIn:D] Running Loop=1 2018-12-05T02:41:17.956Z,1543977677.956 [Default:CheckIn:D] Stopped 2018-12-05T02:41:17.956Z,1543977677.956 [Default:CheckIn:E] Running Loop=1 2018-12-05T02:41:18.362Z,1543977678.362 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1766.432292 min 2018-12-05T02:41:18.363Z,1543977678.363 [Default:CheckIn:E] Stopped 2018-12-05T02:41:18.363Z,1543977678.363 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T02:41:18.363Z,1543977678.363 [Default:CheckIn] Stopped 2018-12-05T02:41:18.363Z,1543977678.363 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T02:41:18.363Z,1543977678.363 [Default:CheckIn](INFO): Running loop #172 2018-12-05T02:41:18.364Z,1543977678.364 [Default:CheckIn] Running Loop=172 2018-12-05T02:41:18.364Z,1543977678.364 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T02:41:18.364Z,1543977678.364 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T02:41:19.125Z,1543977679.125 [NAL9602](INFO): Powering up 2018-12-05T02:41:29.928Z,1543977689.928 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:42:34.728Z,1543977754.728 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:42:34.728Z,1543977754.728 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-05T02:42:34.728Z,1543977754.728 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:42:34.730Z,1543977754.730 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:42:34.730Z,1543977754.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-05T02:42:34.730Z,1543977754.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:42:34.743Z,1543977754.743 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:42:34.743Z,1543977754.743 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:42:35.120Z,1543977755.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:42:35.120Z,1543977755.120 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-05T02:42:35.120Z,1543977755.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:42:35.120Z,1543977755.120 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-05T02:42:35.514Z,1543977755.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:42:35.514Z,1543977755.514 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:42:35.515Z,1543977755.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:42:35.515Z,1543977755.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:42:35.515Z,1543977755.515 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:42:35.516Z,1543977755.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:44:35.790Z,1543977875.790 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:44:35.791Z,1543977875.791 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-05T02:44:35.791Z,1543977875.791 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:44:35.793Z,1543977875.793 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:44:35.793Z,1543977875.793 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-05T02:44:35.793Z,1543977875.793 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:44:35.837Z,1543977875.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:44:35.837Z,1543977875.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:44:36.190Z,1543977876.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:44:36.190Z,1543977876.190 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-05T02:44:36.191Z,1543977876.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:44:36.191Z,1543977876.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-05T02:44:36.586Z,1543977876.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:44:36.587Z,1543977876.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:44:36.587Z,1543977876.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:44:36.587Z,1543977876.587 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:44:36.588Z,1543977876.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:44:36.588Z,1543977876.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:46:19.238Z,1543977979.238 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T02:41:18.4Z 2018-12-05T02:46:19.239Z,1543977979.239 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T02:46:19.239Z,1543977979.239 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T02:46:24.302Z,1543977984.302 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0513.lzma 2018-12-05T02:46:25.101Z,1543977985.101 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0513.lzma.bak 2018-12-05T02:46:25.101Z,1543977985.101 [DataOverHttps](INFO): SBD MOMSN=8967076 2018-12-05T02:46:34.417Z,1543977994.417 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T02:46:34.473Z,1543977994.473 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0514.lzma 2018-12-05T02:46:35.273Z,1543977995.273 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0514.lzma.bak 2018-12-05T02:46:35.273Z,1543977995.273 [DataOverHttps](INFO): SBD MOMSN=8967078 2018-12-05T02:46:36.632Z,1543977996.632 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:46:36.633Z,1543977996.633 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-05T02:46:36.633Z,1543977996.633 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:46:36.635Z,1543977996.635 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:46:36.635Z,1543977996.635 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-05T02:46:36.635Z,1543977996.635 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:46:36.637Z,1543977996.637 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T02:46:36.638Z,1543977996.638 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T02:46:36.638Z,1543977996.638 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T02:46:36.648Z,1543977996.648 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:46:36.649Z,1543977996.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:46:36.788Z,1543977996.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:46:36.788Z,1543977996.788 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-05T02:46:36.789Z,1543977996.789 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:46:36.789Z,1543977996.789 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-05T02:46:39.949Z,1543977999.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:46:39.949Z,1543977999.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:46:39.949Z,1543977999.949 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:46:39.950Z,1543977999.950 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:46:39.950Z,1543977999.950 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:46:39.951Z,1543977999.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:47:04.779Z,1543978024.779 [NAL9602](INFO): Powering down 2018-12-05T02:48:39.970Z,1543978119.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:48:39.970Z,1543978119.970 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-05T02:48:39.970Z,1543978119.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:48:39.972Z,1543978119.972 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:48:39.972Z,1543978119.972 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-05T02:48:39.973Z,1543978119.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:48:39.986Z,1543978119.986 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:48:39.986Z,1543978119.986 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:48:40.379Z,1543978120.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:48:40.379Z,1543978120.379 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-05T02:48:40.380Z,1543978120.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:48:40.380Z,1543978120.380 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-05T02:48:40.770Z,1543978120.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:48:40.771Z,1543978120.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:48:40.771Z,1543978120.771 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:48:40.771Z,1543978120.771 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:48:40.772Z,1543978120.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:48:40.772Z,1543978120.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:50:40.922Z,1543978240.922 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:50:40.922Z,1543978240.922 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-05T02:50:40.923Z,1543978240.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:50:40.925Z,1543978240.925 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:50:40.925Z,1543978240.925 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-05T02:50:40.925Z,1543978240.925 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:50:40.938Z,1543978240.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:50:40.938Z,1543978240.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:50:41.338Z,1543978241.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:50:41.338Z,1543978241.338 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-05T02:50:41.339Z,1543978241.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:50:41.339Z,1543978241.339 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-05T02:50:41.722Z,1543978241.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:50:41.722Z,1543978241.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:50:41.722Z,1543978241.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:50:41.723Z,1543978241.723 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:50:41.723Z,1543978241.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:50:41.724Z,1543978241.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:51:36.862Z,1543978296.862 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T02:51:36.862Z,1543978296.862 [Default:CheckIn:C.Wait] Stopped 2018-12-05T02:51:36.862Z,1543978296.862 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T02:51:36.862Z,1543978296.862 [Default:CheckIn:D] Running Loop=1 2018-12-05T02:51:37.253Z,1543978297.253 [Default:CheckIn:D] Stopped 2018-12-05T02:51:37.253Z,1543978297.253 [Default:CheckIn:E] Running Loop=1 2018-12-05T02:51:37.657Z,1543978297.657 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1776.753906 min 2018-12-05T02:51:37.657Z,1543978297.657 [Default:CheckIn:E] Stopped 2018-12-05T02:51:37.658Z,1543978297.658 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T02:51:37.658Z,1543978297.658 [Default:CheckIn] Stopped 2018-12-05T02:51:37.658Z,1543978297.658 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T02:51:37.658Z,1543978297.658 [Default:CheckIn](INFO): Running loop #173 2018-12-05T02:51:37.658Z,1543978297.658 [Default:CheckIn] Running Loop=173 2018-12-05T02:51:37.658Z,1543978297.658 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T02:51:37.658Z,1543978297.658 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T02:51:38.425Z,1543978298.425 [NAL9602](INFO): Powering up 2018-12-05T02:51:49.228Z,1543978309.228 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:51:50.028Z,1543978310.028 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T02:51:50.028Z,1543978310.028 [NAL9602] Data Fault, FailCount= 1 2018-12-05T02:51:50.028Z,1543978310.028 [NAL9602](ERROR): Data Fault 2018-12-05T02:51:50.084Z,1543978310.084 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T02:51:50.428Z,1543978310.428 [NAL9602](INFO): Powering down 2018-12-05T02:51:51.267Z,1543978311.267 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T02:51:51.267Z,1543978311.267 [NAL9602] No Fault, FailCount= 1 2018-12-05T02:52:20.792Z,1543978340.792 [NAL9602](INFO): Powering up NAL9602 2018-12-05T02:52:32.912Z,1543978352.912 [NAL9602](INFO): NAL9602 initialized 2018-12-05T02:52:41.750Z,1543978361.750 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:52:41.750Z,1543978361.750 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-05T02:52:41.750Z,1543978361.750 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:52:41.752Z,1543978361.752 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:52:41.753Z,1543978361.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-05T02:52:41.753Z,1543978361.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:52:41.808Z,1543978361.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:52:41.808Z,1543978361.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:52:42.164Z,1543978362.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:52:42.164Z,1543978362.164 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-05T02:52:42.165Z,1543978362.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:52:42.165Z,1543978362.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-05T02:52:42.542Z,1543978362.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:52:42.542Z,1543978362.542 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:52:42.543Z,1543978362.543 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:52:42.543Z,1543978362.543 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:52:42.543Z,1543978362.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:52:42.544Z,1543978362.544 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:54:42.614Z,1543978482.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:54:42.614Z,1543978482.614 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-05T02:54:42.614Z,1543978482.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:54:42.616Z,1543978482.616 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:54:42.616Z,1543978482.616 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-05T02:54:42.616Z,1543978482.616 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:54:42.630Z,1543978482.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:54:42.630Z,1543978482.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:54:43.029Z,1543978483.029 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:54:43.029Z,1543978483.029 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-05T02:54:43.030Z,1543978483.030 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:54:43.030Z,1543978483.030 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-05T02:54:43.417Z,1543978483.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:54:43.418Z,1543978483.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:54:43.418Z,1543978483.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:54:43.419Z,1543978483.419 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:54:43.419Z,1543978483.419 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:54:43.420Z,1543978483.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:56:39.107Z,1543978599.107 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T02:51:37.7Z 2018-12-05T02:56:39.107Z,1543978599.107 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T02:56:39.107Z,1543978599.107 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T02:56:44.086Z,1543978604.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:56:44.087Z,1543978604.087 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-05T02:56:44.087Z,1543978604.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:56:44.089Z,1543978604.089 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:56:44.089Z,1543978604.089 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-05T02:56:44.089Z,1543978604.089 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:56:44.127Z,1543978604.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:56:44.127Z,1543978604.127 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:56:44.157Z,1543978604.157 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0516.lzma 2018-12-05T02:56:44.277Z,1543978604.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:56:44.278Z,1543978604.278 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-05T02:56:44.289Z,1543978604.289 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:56:44.289Z,1543978604.289 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-05T02:56:44.587Z,1543978604.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:56:44.587Z,1543978604.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:56:44.588Z,1543978604.588 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:56:44.588Z,1543978604.588 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:56:44.589Z,1543978604.589 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:56:44.589Z,1543978604.589 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:56:44.937Z,1543978604.937 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0516.lzma.bak 2018-12-05T02:56:44.937Z,1543978604.937 [DataOverHttps](INFO): SBD MOMSN=8967100 2018-12-05T02:56:54.409Z,1543978614.409 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0517.lzma 2018-12-05T02:56:55.210Z,1543978615.210 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0517.lzma.bak 2018-12-05T02:56:55.210Z,1543978615.210 [DataOverHttps](INFO): SBD MOMSN=8967102 2018-12-05T02:56:56.572Z,1543978616.572 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T02:56:56.572Z,1543978616.572 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T02:56:56.572Z,1543978616.572 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T02:57:36.250Z,1543978656.250 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T02:58:07.048Z,1543978687.048 [NAL9602](INFO): Powering down 2018-12-05T02:58:45.710Z,1543978725.710 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:58:45.710Z,1543978725.710 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-05T02:58:45.710Z,1543978725.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T02:58:45.712Z,1543978725.712 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T02:58:45.712Z,1543978725.712 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-05T02:58:45.712Z,1543978725.712 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T02:58:45.726Z,1543978725.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T02:58:45.726Z,1543978725.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T02:58:45.851Z,1543978725.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T02:58:45.851Z,1543978725.851 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-05T02:58:45.851Z,1543978725.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T02:58:45.851Z,1543978725.851 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-05T02:58:46.202Z,1543978726.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T02:58:46.202Z,1543978726.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:58:46.203Z,1543978726.203 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T02:58:46.203Z,1543978726.203 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T02:58:46.203Z,1543978726.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T02:58:46.204Z,1543978726.204 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:00:46.377Z,1543978846.377 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:00:46.377Z,1543978846.377 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-05T03:00:46.377Z,1543978846.377 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:00:46.379Z,1543978846.379 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:00:46.380Z,1543978846.380 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-05T03:00:46.380Z,1543978846.380 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:00:46.394Z,1543978846.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:00:46.394Z,1543978846.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:00:46.794Z,1543978846.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:00:46.794Z,1543978846.794 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-05T03:00:46.794Z,1543978846.794 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:00:46.794Z,1543978846.794 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-05T03:00:47.182Z,1543978847.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:00:47.183Z,1543978847.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:00:47.183Z,1543978847.183 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:00:47.183Z,1543978847.183 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:00:47.184Z,1543978847.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:00:47.184Z,1543978847.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:01:56.696Z,1543978916.696 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T03:01:56.696Z,1543978916.696 [Default:CheckIn:C.Wait] Stopped 2018-12-05T03:01:56.696Z,1543978916.696 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T03:01:56.696Z,1543978916.696 [Default:CheckIn:D] Running Loop=1 2018-12-05T03:01:57.094Z,1543978917.094 [Default:CheckIn:D] Stopped 2018-12-05T03:01:57.094Z,1543978917.094 [Default:CheckIn:E] Running Loop=1 2018-12-05T03:01:57.498Z,1543978917.498 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1787.084505 min 2018-12-05T03:01:57.498Z,1543978917.498 [Default:CheckIn:E] Stopped 2018-12-05T03:01:57.499Z,1543978917.499 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T03:01:57.499Z,1543978917.499 [Default:CheckIn] Stopped 2018-12-05T03:01:57.499Z,1543978917.499 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T03:01:57.499Z,1543978917.499 [Default:CheckIn](INFO): Running loop #174 2018-12-05T03:01:57.499Z,1543978917.499 [Default:CheckIn] Running Loop=174 2018-12-05T03:01:57.499Z,1543978917.499 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T03:01:57.499Z,1543978917.499 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T03:01:58.261Z,1543978918.261 [NAL9602](INFO): Powering up 2018-12-05T03:02:09.064Z,1543978929.064 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:02:47.230Z,1543978967.230 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:02:47.230Z,1543978967.230 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-05T03:02:47.231Z,1543978967.231 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:02:47.233Z,1543978967.233 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:02:47.233Z,1543978967.233 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-05T03:02:47.233Z,1543978967.233 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:02:47.247Z,1543978967.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:02:47.247Z,1543978967.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:02:47.642Z,1543978967.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:02:47.642Z,1543978967.642 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-05T03:02:47.642Z,1543978967.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:02:47.642Z,1543978967.642 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-05T03:02:48.038Z,1543978968.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:02:48.038Z,1543978968.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:02:48.039Z,1543978968.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:02:48.039Z,1543978968.039 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:02:48.039Z,1543978968.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:02:48.040Z,1543978968.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:04:48.062Z,1543979088.062 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:04:48.062Z,1543979088.062 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-05T03:04:48.063Z,1543979088.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:04:48.065Z,1543979088.065 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:04:48.065Z,1543979088.065 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-05T03:04:48.065Z,1543979088.065 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:04:48.078Z,1543979088.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:04:48.078Z,1543979088.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:04:48.481Z,1543979088.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:04:48.481Z,1543979088.481 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-05T03:04:48.482Z,1543979088.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:04:48.482Z,1543979088.482 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-05T03:04:48.865Z,1543979088.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:04:48.866Z,1543979088.866 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:04:48.867Z,1543979088.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:04:48.867Z,1543979088.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:04:48.867Z,1543979088.867 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:04:48.868Z,1543979088.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:06:49.034Z,1543979209.034 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:06:49.034Z,1543979209.034 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-05T03:06:49.034Z,1543979209.034 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:06:49.036Z,1543979209.036 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:06:49.036Z,1543979209.036 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-05T03:06:49.037Z,1543979209.037 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:06:49.091Z,1543979209.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:06:49.092Z,1543979209.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:06:49.446Z,1543979209.446 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:06:49.446Z,1543979209.446 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-05T03:06:49.470Z,1543979209.470 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:06:49.470Z,1543979209.470 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-05T03:06:49.846Z,1543979209.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:06:49.860Z,1543979209.860 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:06:49.861Z,1543979209.861 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:06:49.861Z,1543979209.861 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:06:49.862Z,1543979209.862 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:06:49.862Z,1543979209.862 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:06:59.024Z,1543979219.024 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T03:01:57.5Z 2018-12-05T03:06:59.024Z,1543979219.024 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T03:06:59.024Z,1543979219.024 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T03:06:59.910Z,1543979219.910 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T03:06:59.910Z,1543979219.910 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T03:06:59.910Z,1543979219.910 [DropWeight](ERROR): Hardware Fault 2018-12-05T03:06:59.942Z,1543979219.942 [CBIT](INFO): Critical error at 20181205T030659 2018-12-05T03:06:59.945Z,1543979219.945 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T03:06:59.945Z,1543979219.945 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T03:07:00.067Z,1543979220.067 [CBIT](INFO): Critical error at 20181205T030659 2018-12-05T03:07:03.940Z,1543979223.940 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0519.lzma 2018-12-05T03:07:04.721Z,1543979224.721 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0519.lzma.bak 2018-12-05T03:07:04.721Z,1543979224.721 [DataOverHttps](INFO): SBD MOMSN=8967126 2018-12-05T03:07:14.182Z,1543979234.182 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T03:07:14.253Z,1543979234.253 [DataOverHttps](INFO): Sending 299 bytes from file Logs/20181203T211451/Express0520.lzma 2018-12-05T03:07:15.032Z,1543979235.032 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0520.lzma.bak 2018-12-05T03:07:15.033Z,1543979235.033 [DataOverHttps](INFO): SBD MOMSN=8967128 2018-12-05T03:07:16.369Z,1543979236.369 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T03:07:16.369Z,1543979236.369 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T03:07:16.369Z,1543979236.369 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T03:07:44.372Z,1543979264.372 [NAL9602](INFO): Powering down 2018-12-05T03:08:49.943Z,1543979329.943 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:08:49.943Z,1543979329.943 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-05T03:08:49.943Z,1543979329.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:08:49.945Z,1543979329.945 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:08:49.945Z,1543979329.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-05T03:08:49.945Z,1543979329.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:08:49.977Z,1543979329.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:08:49.977Z,1543979329.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:08:50.357Z,1543979330.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:08:50.358Z,1543979330.358 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-05T03:08:50.358Z,1543979330.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:08:50.358Z,1543979330.358 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-05T03:08:50.738Z,1543979330.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:08:50.738Z,1543979330.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:08:50.739Z,1543979330.739 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:08:50.739Z,1543979330.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:08:50.739Z,1543979330.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:08:50.740Z,1543979330.740 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:10:51.034Z,1543979451.034 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:10:51.034Z,1543979451.034 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-05T03:10:51.035Z,1543979451.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:10:51.037Z,1543979451.037 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:10:51.037Z,1543979451.037 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-05T03:10:51.037Z,1543979451.037 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:10:51.050Z,1543979451.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:10:51.051Z,1543979451.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:10:51.170Z,1543979451.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:10:51.174Z,1543979451.174 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-05T03:10:51.175Z,1543979451.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:10:51.175Z,1543979451.175 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-05T03:10:51.494Z,1543979451.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:10:51.494Z,1543979451.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:10:51.494Z,1543979451.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:10:51.495Z,1543979451.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:10:51.495Z,1543979451.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:10:51.496Z,1543979451.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:12:16.484Z,1543979536.484 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T03:12:16.484Z,1543979536.484 [Default:CheckIn:C.Wait] Stopped 2018-12-05T03:12:16.484Z,1543979536.484 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T03:12:16.484Z,1543979536.484 [Default:CheckIn:D] Running Loop=1 2018-12-05T03:12:16.797Z,1543979536.797 [Default:CheckIn:D] Stopped 2018-12-05T03:12:16.797Z,1543979536.797 [Default:CheckIn:E] Running Loop=1 2018-12-05T03:12:17.214Z,1543979537.214 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1797.412891 min 2018-12-05T03:12:17.214Z,1543979537.214 [Default:CheckIn:E] Stopped 2018-12-05T03:12:17.214Z,1543979537.214 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T03:12:17.214Z,1543979537.214 [Default:CheckIn] Stopped 2018-12-05T03:12:17.215Z,1543979537.215 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T03:12:17.215Z,1543979537.215 [Default:CheckIn](INFO): Running loop #175 2018-12-05T03:12:17.215Z,1543979537.215 [Default:CheckIn] Running Loop=175 2018-12-05T03:12:17.215Z,1543979537.215 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T03:12:17.215Z,1543979537.215 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T03:12:17.979Z,1543979537.979 [NAL9602](INFO): Powering up 2018-12-05T03:12:29.183Z,1543979549.183 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:12:29.979Z,1543979549.979 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T03:12:29.979Z,1543979549.979 [NAL9602] Data Fault, FailCount= 2 2018-12-05T03:12:29.979Z,1543979549.979 [NAL9602](ERROR): Data Fault 2018-12-05T03:12:30.014Z,1543979550.014 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T03:12:30.378Z,1543979550.378 [NAL9602](INFO): Powering down 2018-12-05T03:12:31.211Z,1543979551.211 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T03:12:31.211Z,1543979551.211 [NAL9602] No Fault, FailCount= 2 2018-12-05T03:12:51.554Z,1543979571.554 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:12:51.554Z,1543979571.554 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-05T03:12:51.554Z,1543979571.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:12:51.556Z,1543979571.556 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:12:51.556Z,1543979571.556 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-05T03:12:51.557Z,1543979571.557 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:12:51.570Z,1543979571.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:12:51.570Z,1543979571.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:12:51.972Z,1543979571.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:12:51.972Z,1543979571.972 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-05T03:12:51.972Z,1543979571.972 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:12:51.972Z,1543979571.972 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-05T03:12:52.358Z,1543979572.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:12:52.359Z,1543979572.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:12:52.359Z,1543979572.359 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:12:52.359Z,1543979572.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:12:52.360Z,1543979572.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:12:52.360Z,1543979572.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:13:00.731Z,1543979580.731 [NAL9602](INFO): Powering up NAL9602 2018-12-05T03:13:12.280Z,1543979592.280 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:14:52.419Z,1543979692.419 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:14:52.419Z,1543979692.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-05T03:14:52.419Z,1543979692.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:14:52.421Z,1543979692.421 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:14:52.421Z,1543979692.421 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-05T03:14:52.421Z,1543979692.421 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:14:52.436Z,1543979692.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:14:52.436Z,1543979692.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:14:52.835Z,1543979692.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:14:52.835Z,1543979692.835 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-05T03:14:52.835Z,1543979692.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:14:52.835Z,1543979692.835 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-05T03:14:53.214Z,1543979693.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:14:53.215Z,1543979693.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:14:53.215Z,1543979693.215 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:14:53.216Z,1543979693.216 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:14:53.216Z,1543979693.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:14:53.216Z,1543979693.216 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:16:53.258Z,1543979813.258 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:16:53.258Z,1543979813.258 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-05T03:16:53.258Z,1543979813.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:16:53.260Z,1543979813.260 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:16:53.260Z,1543979813.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-05T03:16:53.260Z,1543979813.260 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:16:53.274Z,1543979813.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:16:53.274Z,1543979813.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:16:53.651Z,1543979813.651 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:16:53.651Z,1543979813.651 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-05T03:16:53.652Z,1543979813.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:16:53.652Z,1543979813.652 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-05T03:16:54.047Z,1543979814.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:16:54.047Z,1543979814.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:16:54.047Z,1543979814.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:16:54.048Z,1543979814.048 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:16:54.048Z,1543979814.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:16:54.049Z,1543979814.049 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:17:18.524Z,1543979838.524 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T03:12:17.2Z 2018-12-05T03:17:18.525Z,1543979838.525 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T03:17:18.525Z,1543979838.525 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T03:17:23.555Z,1543979843.555 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0522.lzma 2018-12-05T03:17:24.357Z,1543979844.357 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0522.lzma.bak 2018-12-05T03:17:24.358Z,1543979844.358 [DataOverHttps](INFO): SBD MOMSN=8967151 2018-12-05T03:17:33.818Z,1543979853.818 [DataOverHttps](INFO): Sending 303 bytes from file Logs/20181203T211451/Express0523.lzma 2018-12-05T03:17:34.617Z,1543979854.617 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0523.lzma.bak 2018-12-05T03:17:34.617Z,1543979854.617 [DataOverHttps](INFO): SBD MOMSN=8967155 2018-12-05T03:17:36.001Z,1543979856.001 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T03:17:36.001Z,1543979856.001 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T03:17:36.001Z,1543979856.001 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T03:18:15.212Z,1543979895.212 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T03:18:46.011Z,1543979926.011 [NAL9602](INFO): Powering down 2018-12-05T03:18:54.381Z,1543979934.381 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:18:54.381Z,1543979934.381 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-05T03:18:54.381Z,1543979934.381 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:18:54.383Z,1543979934.383 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:18:54.384Z,1543979934.384 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-05T03:18:54.384Z,1543979934.384 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:18:54.397Z,1543979934.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:18:54.397Z,1543979934.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:18:54.802Z,1543979934.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:18:54.802Z,1543979934.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-05T03:18:54.803Z,1543979934.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:18:54.803Z,1543979934.803 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-05T03:18:55.190Z,1543979935.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:18:55.190Z,1543979935.190 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:18:55.191Z,1543979935.191 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:18:55.191Z,1543979935.191 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:18:55.191Z,1543979935.191 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:18:55.192Z,1543979935.192 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:20:55.326Z,1543980055.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:20:55.326Z,1543980055.326 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-05T03:20:55.326Z,1543980055.326 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:20:55.328Z,1543980055.328 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:20:55.328Z,1543980055.328 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-05T03:20:55.328Z,1543980055.328 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:20:55.388Z,1543980055.388 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:20:55.389Z,1543980055.389 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:20:55.737Z,1543980055.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:20:55.737Z,1543980055.737 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-05T03:20:55.738Z,1543980055.738 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:20:55.738Z,1543980055.738 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-05T03:20:56.124Z,1543980056.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:20:56.125Z,1543980056.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:20:56.125Z,1543980056.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:20:56.126Z,1543980056.126 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:20:56.126Z,1543980056.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:20:56.126Z,1543980056.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:22:00.089Z,1543980120.089 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T03:22:00.089Z,1543980120.089 [DropWeight] No Fault, FailCount= 1 2018-12-05T03:22:36.422Z,1543980156.422 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T03:22:36.423Z,1543980156.423 [Default:CheckIn:C.Wait] Stopped 2018-12-05T03:22:36.423Z,1543980156.423 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T03:22:36.423Z,1543980156.423 [Default:CheckIn:D] Running Loop=1 2018-12-05T03:22:36.826Z,1543980156.826 [Default:CheckIn:D] Stopped 2018-12-05T03:22:36.826Z,1543980156.826 [Default:CheckIn:E] Running Loop=1 2018-12-05T03:22:37.231Z,1543980157.231 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1807.746745 min 2018-12-05T03:22:37.231Z,1543980157.231 [Default:CheckIn:E] Stopped 2018-12-05T03:22:37.231Z,1543980157.231 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T03:22:37.231Z,1543980157.231 [Default:CheckIn] Stopped 2018-12-05T03:22:37.231Z,1543980157.231 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T03:22:37.231Z,1543980157.231 [Default:CheckIn](INFO): Running loop #176 2018-12-05T03:22:37.232Z,1543980157.232 [Default:CheckIn] Running Loop=176 2018-12-05T03:22:37.232Z,1543980157.232 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T03:22:37.232Z,1543980157.232 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T03:22:37.995Z,1543980157.995 [NAL9602](INFO): Powering up 2018-12-05T03:22:49.200Z,1543980169.200 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:22:56.489Z,1543980176.489 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:22:56.489Z,1543980176.489 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-05T03:22:56.490Z,1543980176.490 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:22:56.492Z,1543980176.492 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:22:56.492Z,1543980176.492 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-05T03:22:56.492Z,1543980176.492 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:22:56.505Z,1543980176.505 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:22:56.505Z,1543980176.505 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:22:56.627Z,1543980176.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:22:56.627Z,1543980176.627 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-05T03:22:56.628Z,1543980176.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:22:56.628Z,1543980176.628 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-05T03:22:56.946Z,1543980176.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:22:56.946Z,1543980176.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:22:56.947Z,1543980176.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:22:56.947Z,1543980176.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:22:56.948Z,1543980176.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:22:56.948Z,1543980176.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:23:20.920Z,1543980200.920 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T03:23:20.998Z,1543980200.998 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T03:23:20.998Z,1543980200.998 [NAL9602] Data Fault, FailCount= 3 2018-12-05T03:23:20.998Z,1543980200.998 [NAL9602](ERROR): Data Fault 2018-12-05T03:23:21.036Z,1543980201.036 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T03:23:21.320Z,1543980201.320 [NAL9602](INFO): Powering down 2018-12-05T03:23:22.184Z,1543980202.184 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T03:23:22.184Z,1543980202.184 [NAL9602] No Fault, FailCount= 3 2018-12-05T03:23:51.340Z,1543980231.340 [NAL9602](INFO): Powering up NAL9602 2018-12-05T03:24:02.540Z,1543980242.540 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:24:03.343Z,1543980243.343 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T03:24:03.343Z,1543980243.343 [NAL9602] Data Fault, FailCount= 4 2018-12-05T03:24:03.344Z,1543980243.344 [NAL9602](ERROR): Data Fault 2018-12-05T03:24:03.415Z,1543980243.415 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T03:24:03.747Z,1543980243.747 [NAL9602](INFO): Powering down 2018-12-05T03:24:07.033Z,1543980247.033 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T03:24:07.033Z,1543980247.033 [NAL9602] No Fault, FailCount= 4 2018-12-05T03:24:33.780Z,1543980273.780 [NAL9602](INFO): Powering up NAL9602 2018-12-05T03:24:44.936Z,1543980284.936 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:24:56.971Z,1543980296.971 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:24:56.971Z,1543980296.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-05T03:24:56.972Z,1543980296.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:24:56.974Z,1543980296.974 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:24:56.974Z,1543980296.974 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-05T03:24:56.974Z,1543980296.974 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:24:56.987Z,1543980296.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:24:56.987Z,1543980296.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:24:57.389Z,1543980297.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:24:57.389Z,1543980297.389 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-05T03:24:57.389Z,1543980297.389 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:24:57.389Z,1543980297.389 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-05T03:24:57.760Z,1543980297.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:24:57.761Z,1543980297.761 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:24:57.761Z,1543980297.761 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:24:57.762Z,1543980297.762 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:24:57.762Z,1543980297.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:24:57.779Z,1543980297.779 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:26:57.832Z,1543980417.832 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:26:57.832Z,1543980417.832 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-05T03:26:57.832Z,1543980417.832 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:26:57.834Z,1543980417.834 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:26:57.834Z,1543980417.834 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-05T03:26:57.835Z,1543980417.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:26:57.876Z,1543980417.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:26:57.876Z,1543980417.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:26:58.246Z,1543980418.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:26:58.246Z,1543980418.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-05T03:26:58.278Z,1543980418.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:26:58.278Z,1543980418.278 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-05T03:26:58.634Z,1543980418.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:26:58.634Z,1543980418.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:26:58.635Z,1543980418.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:26:58.635Z,1543980418.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:26:58.636Z,1543980418.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:26:58.636Z,1543980418.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:27:38.302Z,1543980458.302 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T03:22:37.2Z 2018-12-05T03:27:38.302Z,1543980458.302 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T03:27:38.303Z,1543980458.303 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T03:27:43.368Z,1543980463.368 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0525.lzma 2018-12-05T03:27:44.165Z,1543980464.165 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0525.lzma.bak 2018-12-05T03:27:44.165Z,1543980464.165 [DataOverHttps](INFO): SBD MOMSN=8967177 2018-12-05T03:27:53.804Z,1543980473.804 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T03:27:53.879Z,1543980473.879 [DataOverHttps](INFO): Sending 344 bytes from file Logs/20181203T211451/Express0526.lzma 2018-12-05T03:27:54.649Z,1543980474.649 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0526.lzma.bak 2018-12-05T03:27:54.650Z,1543980474.650 [DataOverHttps](INFO): SBD MOMSN=8967179 2018-12-05T03:27:56.016Z,1543980476.016 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T03:27:56.016Z,1543980476.016 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T03:27:56.017Z,1543980476.017 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T03:28:24.139Z,1543980504.139 [NAL9602](INFO): Powering down 2018-12-05T03:28:58.964Z,1543980538.964 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:28:58.964Z,1543980538.964 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-05T03:28:58.964Z,1543980538.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:28:58.967Z,1543980538.967 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:28:58.967Z,1543980538.967 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-05T03:28:58.967Z,1543980538.967 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:28:58.980Z,1543980538.980 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:28:58.980Z,1543980538.980 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:28:59.384Z,1543980539.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:28:59.384Z,1543980539.384 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-05T03:28:59.384Z,1543980539.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:28:59.384Z,1543980539.384 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-05T03:28:59.747Z,1543980539.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:28:59.748Z,1543980539.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:28:59.748Z,1543980539.748 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:28:59.748Z,1543980539.748 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:28:59.749Z,1543980539.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:28:59.749Z,1543980539.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:30:59.974Z,1543980659.974 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:30:59.974Z,1543980659.974 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-05T03:30:59.974Z,1543980659.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:30:59.976Z,1543980659.976 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:30:59.976Z,1543980659.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-05T03:30:59.977Z,1543980659.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:30:59.990Z,1543980659.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:30:59.990Z,1543980659.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:31:00.386Z,1543980660.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:31:00.386Z,1543980660.386 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-05T03:31:00.387Z,1543980660.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:31:00.387Z,1543980660.387 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-05T03:31:00.771Z,1543980660.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:31:00.772Z,1543980660.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:31:00.772Z,1543980660.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:31:00.772Z,1543980660.772 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:31:00.773Z,1543980660.773 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:31:00.773Z,1543980660.773 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:32:56.246Z,1543980776.246 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T03:32:56.246Z,1543980776.246 [Default:CheckIn:C.Wait] Stopped 2018-12-05T03:32:56.246Z,1543980776.246 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T03:32:56.246Z,1543980776.246 [Default:CheckIn:D] Running Loop=1 2018-12-05T03:32:56.638Z,1543980776.638 [Default:CheckIn:D] Stopped 2018-12-05T03:32:56.638Z,1543980776.638 [Default:CheckIn:E] Running Loop=1 2018-12-05T03:32:57.038Z,1543980777.038 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1818.076953 min 2018-12-05T03:32:57.039Z,1543980777.039 [Default:CheckIn:E] Stopped 2018-12-05T03:32:57.039Z,1543980777.039 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T03:32:57.039Z,1543980777.039 [Default:CheckIn] Stopped 2018-12-05T03:32:57.039Z,1543980777.039 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T03:32:57.039Z,1543980777.039 [Default:CheckIn](INFO): Running loop #177 2018-12-05T03:32:57.039Z,1543980777.039 [Default:CheckIn] Running Loop=177 2018-12-05T03:32:57.039Z,1543980777.039 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T03:32:57.040Z,1543980777.040 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T03:32:57.811Z,1543980777.811 [NAL9602](INFO): Powering up 2018-12-05T03:33:01.029Z,1543980781.029 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:33:01.029Z,1543980781.029 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-05T03:33:01.030Z,1543980781.030 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:33:01.032Z,1543980781.032 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:33:01.032Z,1543980781.032 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-05T03:33:01.032Z,1543980781.032 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:33:01.046Z,1543980781.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:33:01.046Z,1543980781.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:33:01.441Z,1543980781.441 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:33:01.441Z,1543980781.441 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-05T03:33:01.442Z,1543980781.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:33:01.442Z,1543980781.442 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-05T03:33:01.834Z,1543980781.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:33:01.834Z,1543980781.834 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:33:01.835Z,1543980781.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:33:01.835Z,1543980781.835 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:33:01.835Z,1543980781.835 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:33:01.836Z,1543980781.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:33:09.004Z,1543980789.004 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:33:28.325Z,1543980808.325 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T03:33:40.700Z,1543980820.700 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T03:33:40.782Z,1543980820.782 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T03:33:40.782Z,1543980820.782 [NAL9602] Data Fault, FailCount= 5 2018-12-05T03:33:40.782Z,1543980820.782 [NAL9602](ERROR): Data Fault 2018-12-05T03:33:40.857Z,1543980820.857 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T03:33:40.858Z,1543980820.858 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T03:33:41.100Z,1543980821.100 [NAL9602](INFO): Powering down 2018-12-05T03:33:41.148Z,1543980821.148 [CBIT](INFO): Critical error at 20181205T033340 2018-12-05T03:35:02.543Z,1543980902.543 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:35:02.543Z,1543980902.543 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-05T03:35:02.543Z,1543980902.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:35:02.546Z,1543980902.546 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:35:02.546Z,1543980902.546 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-05T03:35:02.546Z,1543980902.546 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:35:02.565Z,1543980902.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:35:02.565Z,1543980902.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:35:02.685Z,1543980902.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:35:02.685Z,1543980902.685 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-05T03:35:02.686Z,1543980902.686 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:35:02.686Z,1543980902.686 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-05T03:35:03.026Z,1543980903.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:35:03.026Z,1543980903.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:35:03.027Z,1543980903.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:35:03.031Z,1543980903.031 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:35:03.032Z,1543980903.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:35:03.032Z,1543980903.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:35:41.127Z,1543980941.127 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T03:35:41.127Z,1543980941.127 [NAL9602] No Fault, FailCount= 5 2018-12-05T03:35:41.492Z,1543980941.492 [NAL9602](INFO): Powering up NAL9602 2018-12-05T03:35:52.692Z,1543980952.692 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:35:53.496Z,1543980953.496 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T03:35:53.496Z,1543980953.496 [NAL9602] Data Fault, FailCount= 1 2018-12-05T03:35:53.496Z,1543980953.496 [NAL9602](ERROR): Data Fault 2018-12-05T03:35:53.573Z,1543980953.573 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T03:35:53.892Z,1543980953.892 [NAL9602](INFO): Powering down 2018-12-05T03:35:54.731Z,1543980954.731 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T03:35:54.732Z,1543980954.732 [NAL9602] No Fault, FailCount= 1 2018-12-05T03:36:23.908Z,1543980983.908 [NAL9602](INFO): Powering up NAL9602 2018-12-05T03:36:34.708Z,1543980994.708 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:37:03.118Z,1543981023.118 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:37:03.118Z,1543981023.118 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-05T03:37:03.118Z,1543981023.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:37:03.120Z,1543981023.120 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:37:03.120Z,1543981023.120 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-05T03:37:03.121Z,1543981023.121 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:37:03.172Z,1543981023.172 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:37:03.172Z,1543981023.172 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:37:03.548Z,1543981023.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:37:03.548Z,1543981023.548 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-05T03:37:03.549Z,1543981023.549 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:37:03.549Z,1543981023.549 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-05T03:37:03.926Z,1543981023.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:37:03.927Z,1543981023.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:37:03.927Z,1543981023.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:37:03.927Z,1543981023.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:37:03.928Z,1543981023.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:37:03.928Z,1543981023.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:37:58.584Z,1543981078.584 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T03:32:57.0Z 2018-12-05T03:37:58.584Z,1543981078.584 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T03:37:58.584Z,1543981078.584 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T03:38:03.541Z,1543981083.541 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20181203T211451/Courier0528.lzma 2018-12-05T03:38:04.341Z,1543981084.341 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0528.lzma.bak 2018-12-05T03:38:04.341Z,1543981084.341 [DataOverHttps](INFO): SBD MOMSN=8967204 2018-12-05T03:38:14.106Z,1543981094.106 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T03:38:14.192Z,1543981094.192 [DataOverHttps](INFO): Sending 342 bytes from file Logs/20181203T211451/Express0529.lzma 2018-12-05T03:38:14.966Z,1543981094.966 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0529.lzma.bak 2018-12-05T03:38:15.002Z,1543981095.002 [DataOverHttps](INFO): SBD MOMSN=8967207 2018-12-05T03:38:16.327Z,1543981096.327 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T03:38:16.328Z,1543981096.328 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T03:38:16.328Z,1543981096.328 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T03:38:44.351Z,1543981124.351 [NAL9602](INFO): Powering down 2018-12-05T03:39:04.078Z,1543981144.078 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:39:04.078Z,1543981144.078 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-05T03:39:04.078Z,1543981144.078 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:39:04.080Z,1543981144.080 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:39:04.080Z,1543981144.080 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-05T03:39:04.081Z,1543981144.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:39:04.094Z,1543981144.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:39:04.094Z,1543981144.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:39:04.490Z,1543981144.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:39:04.490Z,1543981144.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-05T03:39:04.491Z,1543981144.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:39:04.491Z,1543981144.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-05T03:39:04.872Z,1543981144.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:39:04.872Z,1543981144.872 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:39:04.873Z,1543981144.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:39:04.873Z,1543981144.873 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:39:04.874Z,1543981144.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:39:04.874Z,1543981144.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:41:04.889Z,1543981264.889 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:41:04.889Z,1543981264.889 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-05T03:41:04.889Z,1543981264.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:41:04.891Z,1543981264.891 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:41:04.892Z,1543981264.892 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-05T03:41:04.892Z,1543981264.892 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:41:04.905Z,1543981264.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:41:04.905Z,1543981264.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:41:05.318Z,1543981265.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:41:05.318Z,1543981265.318 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-05T03:41:05.319Z,1543981265.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:41:05.319Z,1543981265.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-05T03:41:05.702Z,1543981265.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:41:05.702Z,1543981265.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:41:05.703Z,1543981265.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:41:05.703Z,1543981265.703 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:41:05.704Z,1543981265.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:41:05.704Z,1543981265.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:43:05.989Z,1543981385.989 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:43:05.989Z,1543981385.989 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-05T03:43:05.989Z,1543981385.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:43:05.991Z,1543981385.991 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:43:05.991Z,1543981385.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-05T03:43:05.991Z,1543981385.991 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:43:06.005Z,1543981386.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:43:06.005Z,1543981386.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:43:06.401Z,1543981386.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:43:06.401Z,1543981386.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-05T03:43:06.402Z,1543981386.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:43:06.402Z,1543981386.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-05T03:43:06.794Z,1543981386.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:43:06.795Z,1543981386.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:43:06.795Z,1543981386.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:43:06.795Z,1543981386.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:43:06.796Z,1543981386.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:43:06.796Z,1543981386.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:43:16.802Z,1543981396.802 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T03:43:16.802Z,1543981396.802 [Default:CheckIn:C.Wait] Stopped 2018-12-05T03:43:16.802Z,1543981396.802 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T03:43:16.802Z,1543981396.802 [Default:CheckIn:D] Running Loop=1 2018-12-05T03:43:17.202Z,1543981397.202 [Default:CheckIn:D] Stopped 2018-12-05T03:43:17.202Z,1543981397.202 [Default:CheckIn:E] Running Loop=1 2018-12-05T03:43:17.599Z,1543981397.599 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1828.419661 min 2018-12-05T03:43:17.599Z,1543981397.599 [Default:CheckIn:E] Stopped 2018-12-05T03:43:17.599Z,1543981397.599 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T03:43:17.599Z,1543981397.599 [Default:CheckIn] Stopped 2018-12-05T03:43:17.599Z,1543981397.599 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T03:43:17.600Z,1543981397.600 [Default:CheckIn](INFO): Running loop #178 2018-12-05T03:43:17.600Z,1543981397.600 [Default:CheckIn] Running Loop=178 2018-12-05T03:43:17.600Z,1543981397.600 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T03:43:17.600Z,1543981397.600 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T03:43:18.365Z,1543981398.365 [NAL9602](INFO): Powering up 2018-12-05T03:43:29.568Z,1543981409.568 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:44:01.276Z,1543981441.276 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T03:44:01.350Z,1543981441.350 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T03:44:01.350Z,1543981441.350 [NAL9602] Data Fault, FailCount= 2 2018-12-05T03:44:01.350Z,1543981441.350 [NAL9602](ERROR): Data Fault 2018-12-05T03:44:01.430Z,1543981441.430 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T03:44:01.676Z,1543981441.676 [NAL9602](INFO): Powering down 2018-12-05T03:44:02.533Z,1543981442.533 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T03:44:02.533Z,1543981442.533 [NAL9602] No Fault, FailCount= 2 2018-12-05T03:44:32.052Z,1543981472.052 [NAL9602](INFO): Powering up NAL9602 2018-12-05T03:44:43.256Z,1543981483.256 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:45:06.958Z,1543981506.958 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:45:06.972Z,1543981506.972 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-05T03:45:06.972Z,1543981506.972 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:45:06.975Z,1543981506.975 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:45:06.975Z,1543981506.975 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-05T03:45:06.975Z,1543981506.975 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:45:06.988Z,1543981506.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:45:06.988Z,1543981506.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:45:07.394Z,1543981507.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:45:07.394Z,1543981507.394 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-05T03:45:07.395Z,1543981507.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:45:07.395Z,1543981507.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-05T03:45:07.751Z,1543981507.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:45:07.751Z,1543981507.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:45:07.752Z,1543981507.752 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:45:07.752Z,1543981507.752 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:45:07.752Z,1543981507.752 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:45:07.753Z,1543981507.753 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:47:08.173Z,1543981628.173 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:47:08.173Z,1543981628.173 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-05T03:47:08.173Z,1543981628.173 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:47:08.176Z,1543981628.176 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:47:08.176Z,1543981628.176 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-05T03:47:08.176Z,1543981628.176 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:47:08.190Z,1543981628.190 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:47:08.190Z,1543981628.190 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:47:08.323Z,1543981628.323 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:47:08.323Z,1543981628.323 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-05T03:47:08.323Z,1543981628.323 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:47:08.323Z,1543981628.323 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-05T03:47:08.642Z,1543981628.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:47:08.642Z,1543981628.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:47:08.643Z,1543981628.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:47:08.643Z,1543981628.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:47:08.644Z,1543981628.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:47:08.644Z,1543981628.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:48:18.652Z,1543981698.652 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T03:43:17.6Z 2018-12-05T03:48:18.652Z,1543981698.652 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T03:48:18.652Z,1543981698.652 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T03:48:24.026Z,1543981704.026 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0531.lzma 2018-12-05T03:48:24.827Z,1543981704.827 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0531.lzma.bak 2018-12-05T03:48:24.830Z,1543981704.830 [DataOverHttps](INFO): SBD MOMSN=8967230 2018-12-05T03:48:34.361Z,1543981714.361 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T03:48:34.443Z,1543981714.443 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20181203T211451/Express0532.lzma 2018-12-05T03:48:35.233Z,1543981715.233 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0532.lzma.bak 2018-12-05T03:48:35.233Z,1543981715.233 [DataOverHttps](INFO): SBD MOMSN=8967232 2018-12-05T03:48:36.574Z,1543981716.574 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T03:48:36.574Z,1543981716.574 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T03:48:36.574Z,1543981716.574 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T03:49:04.552Z,1543981744.552 [NAL9602](INFO): Powering down 2018-12-05T03:49:08.967Z,1543981748.967 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:49:08.967Z,1543981748.967 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-05T03:49:08.967Z,1543981748.967 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:49:08.969Z,1543981748.969 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:49:08.969Z,1543981748.969 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-05T03:49:08.969Z,1543981748.969 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:49:08.982Z,1543981748.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:49:08.983Z,1543981748.983 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:49:09.391Z,1543981749.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:49:09.391Z,1543981749.391 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-05T03:49:09.391Z,1543981749.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:49:09.391Z,1543981749.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-05T03:49:09.769Z,1543981749.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:49:09.770Z,1543981749.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:49:09.770Z,1543981749.770 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:49:09.771Z,1543981749.771 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:49:09.771Z,1543981749.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:49:09.772Z,1543981749.772 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:51:09.941Z,1543981869.941 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:51:09.942Z,1543981869.942 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-05T03:51:09.942Z,1543981869.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:51:09.944Z,1543981869.944 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:51:09.944Z,1543981869.944 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-05T03:51:09.944Z,1543981869.944 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:51:09.958Z,1543981869.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:51:09.958Z,1543981869.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:51:10.348Z,1543981870.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:51:10.349Z,1543981870.349 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-05T03:51:10.349Z,1543981870.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:51:10.349Z,1543981870.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-05T03:51:10.742Z,1543981870.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:51:10.742Z,1543981870.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:51:10.743Z,1543981870.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:51:10.743Z,1543981870.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:51:10.743Z,1543981870.743 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:51:10.744Z,1543981870.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:52:01.471Z,1543981921.471 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T03:52:01.471Z,1543981921.471 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T03:52:01.472Z,1543981921.472 [DropWeight](ERROR): Hardware Fault 2018-12-05T03:52:01.531Z,1543981921.531 [CBIT](INFO): Critical error at 20181205T035201 2018-12-05T03:52:01.534Z,1543981921.534 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T03:52:01.537Z,1543981921.537 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T03:52:01.914Z,1543981921.914 [CBIT](INFO): Critical error at 20181205T035201 2018-12-05T03:53:11.118Z,1543981991.118 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:53:11.118Z,1543981991.118 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-05T03:53:11.118Z,1543981991.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:53:11.120Z,1543981991.120 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:53:11.120Z,1543981991.120 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-05T03:53:11.121Z,1543981991.121 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:53:11.134Z,1543981991.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:53:11.134Z,1543981991.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:53:11.524Z,1543981991.524 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:53:11.524Z,1543981991.524 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-05T03:53:11.525Z,1543981991.525 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:53:11.525Z,1543981991.525 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-05T03:53:11.918Z,1543981991.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:53:11.919Z,1543981991.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:53:11.919Z,1543981991.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:53:11.919Z,1543981991.919 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:53:11.920Z,1543981991.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:53:11.920Z,1543981991.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:53:36.826Z,1543982016.826 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T03:53:36.826Z,1543982016.826 [Default:CheckIn:C.Wait] Stopped 2018-12-05T03:53:36.826Z,1543982016.826 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T03:53:36.826Z,1543982016.826 [Default:CheckIn:D] Running Loop=1 2018-12-05T03:53:37.234Z,1543982017.234 [Default:CheckIn:D] Stopped 2018-12-05T03:53:37.234Z,1543982017.234 [Default:CheckIn:E] Running Loop=1 2018-12-05T03:53:37.631Z,1543982017.631 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1838.753516 min 2018-12-05T03:53:37.631Z,1543982017.631 [Default:CheckIn:E] Stopped 2018-12-05T03:53:37.631Z,1543982017.631 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T03:53:37.631Z,1543982017.631 [Default:CheckIn] Stopped 2018-12-05T03:53:37.631Z,1543982017.631 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T03:53:37.631Z,1543982017.631 [Default:CheckIn](INFO): Running loop #179 2018-12-05T03:53:37.631Z,1543982017.631 [Default:CheckIn] Running Loop=179 2018-12-05T03:53:37.632Z,1543982017.632 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T03:53:37.632Z,1543982017.632 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T03:53:38.397Z,1543982018.397 [NAL9602](INFO): Powering up 2018-12-05T03:53:49.199Z,1543982029.199 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:53:50.004Z,1543982030.004 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T03:53:50.004Z,1543982030.004 [NAL9602] Data Fault, FailCount= 3 2018-12-05T03:53:50.004Z,1543982030.004 [NAL9602](ERROR): Data Fault 2018-12-05T03:53:50.058Z,1543982030.058 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T03:53:50.399Z,1543982030.399 [NAL9602](INFO): Powering down 2018-12-05T03:53:51.239Z,1543982031.239 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T03:53:51.240Z,1543982031.240 [NAL9602] No Fault, FailCount= 3 2018-12-05T03:54:20.461Z,1543982060.461 [NAL9602](INFO): Powering up NAL9602 2018-12-05T03:54:32.819Z,1543982072.819 [NAL9602](INFO): NAL9602 initialized 2018-12-05T03:55:12.027Z,1543982112.027 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:55:12.027Z,1543982112.027 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-05T03:55:12.027Z,1543982112.027 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:55:12.029Z,1543982112.029 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:55:12.029Z,1543982112.029 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-05T03:55:12.029Z,1543982112.029 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:55:12.043Z,1543982112.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:55:12.043Z,1543982112.043 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:55:12.445Z,1543982112.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:55:12.446Z,1543982112.446 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-05T03:55:12.446Z,1543982112.446 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:55:12.447Z,1543982112.447 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-05T03:55:12.834Z,1543982112.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:55:12.834Z,1543982112.834 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:55:12.835Z,1543982112.835 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:55:12.835Z,1543982112.835 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:55:12.836Z,1543982112.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:55:12.836Z,1543982112.836 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:57:12.934Z,1543982232.934 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:57:12.934Z,1543982232.934 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-05T03:57:12.934Z,1543982232.934 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:57:12.936Z,1543982232.936 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:57:12.937Z,1543982232.937 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-05T03:57:12.937Z,1543982232.937 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:57:12.950Z,1543982232.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:57:12.950Z,1543982232.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:57:13.346Z,1543982233.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:57:13.346Z,1543982233.346 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-05T03:57:13.347Z,1543982233.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:57:13.347Z,1543982233.347 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-05T03:57:13.726Z,1543982233.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:57:13.731Z,1543982233.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:57:13.731Z,1543982233.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:57:13.731Z,1543982233.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:57:13.732Z,1543982233.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:57:13.732Z,1543982233.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:58:38.892Z,1543982318.892 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T03:53:37.6Z 2018-12-05T03:58:38.892Z,1543982318.892 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T03:58:38.892Z,1543982318.892 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T03:58:43.822Z,1543982323.822 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0534.lzma 2018-12-05T03:58:44.609Z,1543982324.609 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0534.lzma.bak 2018-12-05T03:58:44.609Z,1543982324.609 [DataOverHttps](INFO): SBD MOMSN=8967254 2018-12-05T03:58:54.042Z,1543982334.042 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0535.lzma 2018-12-05T03:58:54.841Z,1543982334.841 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0535.lzma.bak 2018-12-05T03:58:54.841Z,1543982334.841 [DataOverHttps](INFO): SBD MOMSN=8967258 2018-12-05T03:58:56.173Z,1543982336.173 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T03:58:56.173Z,1543982336.173 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T03:58:56.173Z,1543982336.173 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T03:59:13.822Z,1543982353.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:59:13.822Z,1543982353.822 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-05T03:59:13.822Z,1543982353.822 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T03:59:13.824Z,1543982353.824 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T03:59:13.825Z,1543982353.825 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-05T03:59:13.825Z,1543982353.825 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T03:59:13.859Z,1543982353.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T03:59:13.859Z,1543982353.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T03:59:14.256Z,1543982354.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T03:59:14.256Z,1543982354.256 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-05T03:59:14.256Z,1543982354.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T03:59:14.256Z,1543982354.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-05T03:59:14.643Z,1543982354.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T03:59:14.644Z,1543982354.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:59:14.644Z,1543982354.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:59:14.644Z,1543982354.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T03:59:14.645Z,1543982354.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T03:59:14.645Z,1543982354.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T03:59:35.947Z,1543982375.947 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T04:00:06.751Z,1543982406.751 [NAL9602](INFO): Powering down 2018-12-05T04:00:11.182Z,1543982411.182 [BuoyancyServo](ERROR): getPosition uart error serial timeout 2018-12-05T04:00:11.183Z,1543982411.183 [BuoyancyServo](FAULT): Buoyancy getPosition uart error.serial timeout 2018-12-05T04:00:11.183Z,1543982411.183 [BuoyancyServo] Communications Fault, FailCount= 1 2018-12-05T04:00:11.183Z,1543982411.183 [BuoyancyServo](ERROR): Communications Fault 2018-12-05T04:00:11.188Z,1543982411.188 [CBIT](ERROR): Communications Fault in component: BuoyancyServo 2018-12-05T04:00:12.883Z,1543982412.883 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo. 2018-12-05T04:00:12.883Z,1543982412.883 [BuoyancyServo](INFO): Powering down 2018-12-05T04:00:13.685Z,1543982413.685 [CBIT](INFO): Clearing failed state for component BuoyancyServo 2018-12-05T04:00:13.685Z,1543982413.685 [BuoyancyServo] No Fault, FailCount= 1 2018-12-05T04:00:14.083Z,1543982414.083 [BuoyancyServo](DEBUG): Initializing EZServoServo. 2018-12-05T04:00:14.084Z,1543982414.084 [BuoyancyServo](DEBUG): Initializing BuoyancyServo. 2018-12-05T04:00:17.369Z,1543982417.369 [Reporter](INFO): platform_buoyancy_position 960.217789 cc 2018-12-05T04:01:14.838Z,1543982474.838 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:01:14.838Z,1543982474.838 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-05T04:01:14.838Z,1543982474.838 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:01:14.840Z,1543982474.840 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:01:14.841Z,1543982474.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-05T04:01:14.841Z,1543982474.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:01:14.855Z,1543982474.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:01:14.855Z,1543982474.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:01:15.254Z,1543982475.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:01:15.254Z,1543982475.254 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-05T04:01:15.254Z,1543982475.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:01:15.255Z,1543982475.255 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-05T04:01:15.632Z,1543982475.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:01:15.633Z,1543982475.633 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:01:15.633Z,1543982475.633 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:01:15.634Z,1543982475.634 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:01:15.634Z,1543982475.634 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:01:15.634Z,1543982475.634 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:03:15.741Z,1543982595.741 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:03:15.741Z,1543982595.741 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-05T04:03:15.741Z,1543982595.741 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:03:15.743Z,1543982595.743 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:03:15.743Z,1543982595.743 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-05T04:03:15.743Z,1543982595.743 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:03:15.757Z,1543982595.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:03:15.757Z,1543982595.757 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:03:16.164Z,1543982596.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:03:16.164Z,1543982596.164 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-05T04:03:16.165Z,1543982596.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:03:16.165Z,1543982596.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-05T04:03:16.544Z,1543982596.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:03:16.545Z,1543982596.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:03:16.545Z,1543982596.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:03:16.545Z,1543982596.545 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:03:16.546Z,1543982596.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:03:16.546Z,1543982596.546 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:03:56.594Z,1543982636.594 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T04:03:56.594Z,1543982636.594 [Default:CheckIn:C.Wait] Stopped 2018-12-05T04:03:56.594Z,1543982636.594 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T04:03:56.594Z,1543982636.594 [Default:CheckIn:D] Running Loop=1 2018-12-05T04:03:56.992Z,1543982636.992 [Default:CheckIn:D] Stopped 2018-12-05T04:03:56.992Z,1543982636.992 [Default:CheckIn:E] Running Loop=1 2018-12-05T04:03:57.402Z,1543982637.402 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1849.082813 min 2018-12-05T04:03:57.402Z,1543982637.402 [Default:CheckIn:E] Stopped 2018-12-05T04:03:57.403Z,1543982637.403 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T04:03:57.403Z,1543982637.403 [Default:CheckIn] Stopped 2018-12-05T04:03:57.403Z,1543982637.403 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T04:03:57.403Z,1543982637.403 [Default:CheckIn](INFO): Running loop #180 2018-12-05T04:03:57.403Z,1543982637.403 [Default:CheckIn] Running Loop=180 2018-12-05T04:03:57.403Z,1543982637.403 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T04:03:57.403Z,1543982637.403 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T04:03:58.163Z,1543982638.163 [NAL9602](INFO): Powering up 2018-12-05T04:04:08.964Z,1543982648.964 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:05:16.917Z,1543982716.917 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:05:16.917Z,1543982716.917 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-05T04:05:16.917Z,1543982716.917 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:05:16.919Z,1543982716.919 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:05:16.919Z,1543982716.919 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-05T04:05:16.919Z,1543982716.919 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:05:16.944Z,1543982716.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:05:16.945Z,1543982716.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:05:17.354Z,1543982717.354 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:05:17.355Z,1543982717.355 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-05T04:05:17.355Z,1543982717.355 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:05:17.355Z,1543982717.355 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-05T04:05:17.726Z,1543982717.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:05:17.726Z,1543982717.726 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:05:17.727Z,1543982717.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:05:17.727Z,1543982717.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:05:17.727Z,1543982717.727 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:05:17.728Z,1543982717.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:07:01.545Z,1543982821.545 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T04:07:01.545Z,1543982821.545 [DropWeight] No Fault, FailCount= 1 2018-12-05T04:07:17.902Z,1543982837.902 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:07:17.902Z,1543982837.902 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-05T04:07:17.903Z,1543982837.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:07:17.905Z,1543982837.905 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:07:17.905Z,1543982837.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-05T04:07:17.905Z,1543982837.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:07:17.963Z,1543982837.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:07:17.963Z,1543982837.963 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:07:18.330Z,1543982838.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:07:18.331Z,1543982838.331 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-05T04:07:18.331Z,1543982838.331 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:07:18.331Z,1543982838.331 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-05T04:07:18.701Z,1543982838.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:07:18.701Z,1543982838.701 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:07:18.702Z,1543982838.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:07:18.702Z,1543982838.702 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:07:18.703Z,1543982838.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:07:18.703Z,1543982838.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:08:58.737Z,1543982938.737 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T04:03:57.4Z 2018-12-05T04:08:58.737Z,1543982938.737 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T04:08:58.737Z,1543982938.737 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T04:09:03.708Z,1543982943.708 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0537.lzma 2018-12-05T04:09:04.509Z,1543982944.509 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0537.lzma.bak 2018-12-05T04:09:04.509Z,1543982944.509 [DataOverHttps](INFO): SBD MOMSN=8967281 2018-12-05T04:09:13.926Z,1543982953.926 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T04:09:14.003Z,1543982954.003 [DataOverHttps](INFO): Sending 329 bytes from file Logs/20181203T211451/Express0538.lzma 2018-12-05T04:09:14.769Z,1543982954.769 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0538.lzma.bak 2018-12-05T04:09:14.770Z,1543982954.770 [DataOverHttps](INFO): SBD MOMSN=8967283 2018-12-05T04:09:16.157Z,1543982956.157 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T04:09:16.157Z,1543982956.157 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T04:09:16.157Z,1543982956.157 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T04:09:19.411Z,1543982959.411 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:09:19.411Z,1543982959.411 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-05T04:09:19.411Z,1543982959.411 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:09:19.413Z,1543982959.413 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:09:19.413Z,1543982959.413 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-05T04:09:19.413Z,1543982959.413 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:09:19.471Z,1543982959.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:09:19.471Z,1543982959.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:09:19.563Z,1543982959.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:09:19.563Z,1543982959.563 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-05T04:09:19.564Z,1543982959.564 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:09:19.564Z,1543982959.564 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-05T04:09:19.922Z,1543982959.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:09:19.922Z,1543982959.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:09:19.923Z,1543982959.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:09:19.923Z,1543982959.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:09:19.924Z,1543982959.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:09:19.924Z,1543982959.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:09:44.299Z,1543982984.299 [NAL9602](INFO): Powering down 2018-12-05T04:11:19.971Z,1543983079.971 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:11:19.971Z,1543983079.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-05T04:11:19.971Z,1543983079.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:11:19.973Z,1543983079.973 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:11:19.973Z,1543983079.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-05T04:11:19.973Z,1543983079.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:11:19.987Z,1543983079.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:11:19.987Z,1543983079.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:11:20.387Z,1543983080.387 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:11:20.387Z,1543983080.387 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-05T04:11:20.388Z,1543983080.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:11:20.388Z,1543983080.388 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-05T04:11:20.767Z,1543983080.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:11:20.768Z,1543983080.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:11:20.768Z,1543983080.768 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:11:20.769Z,1543983080.769 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:11:20.769Z,1543983080.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:11:20.769Z,1543983080.769 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:13:20.794Z,1543983200.794 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:13:20.794Z,1543983200.794 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-05T04:13:20.794Z,1543983200.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:13:20.796Z,1543983200.796 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:13:20.796Z,1543983200.796 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-05T04:13:20.796Z,1543983200.796 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:13:20.810Z,1543983200.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:13:20.810Z,1543983200.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:13:21.217Z,1543983201.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:13:21.217Z,1543983201.217 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-05T04:13:21.218Z,1543983201.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:13:21.218Z,1543983201.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-05T04:13:21.590Z,1543983201.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:13:21.604Z,1543983201.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:13:21.604Z,1543983201.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:13:21.605Z,1543983201.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:13:21.605Z,1543983201.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:13:21.605Z,1543983201.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:14:16.469Z,1543983256.469 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T04:14:16.470Z,1543983256.470 [Default:CheckIn:C.Wait] Stopped 2018-12-05T04:14:16.470Z,1543983256.470 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T04:14:16.470Z,1543983256.470 [Default:CheckIn:D] Running Loop=1 2018-12-05T04:14:16.874Z,1543983256.874 [Default:CheckIn:D] Stopped 2018-12-05T04:14:16.874Z,1543983256.874 [Default:CheckIn:E] Running Loop=1 2018-12-05T04:14:17.274Z,1543983257.274 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1859.414193 min 2018-12-05T04:14:17.274Z,1543983257.274 [Default:CheckIn:E] Stopped 2018-12-05T04:14:17.275Z,1543983257.275 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T04:14:17.275Z,1543983257.275 [Default:CheckIn] Stopped 2018-12-05T04:14:17.275Z,1543983257.275 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T04:14:17.275Z,1543983257.275 [Default:CheckIn](INFO): Running loop #181 2018-12-05T04:14:17.275Z,1543983257.275 [Default:CheckIn] Running Loop=181 2018-12-05T04:14:17.275Z,1543983257.275 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T04:14:17.275Z,1543983257.275 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T04:14:18.044Z,1543983258.044 [NAL9602](INFO): Powering up 2018-12-05T04:14:29.244Z,1543983269.244 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:14:30.044Z,1543983270.044 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T04:14:30.044Z,1543983270.044 [NAL9602] Data Fault, FailCount= 4 2018-12-05T04:14:30.044Z,1543983270.044 [NAL9602](ERROR): Data Fault 2018-12-05T04:14:30.109Z,1543983270.109 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T04:14:30.444Z,1543983270.444 [NAL9602](INFO): Powering down 2018-12-05T04:14:31.288Z,1543983271.288 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T04:14:31.288Z,1543983271.288 [NAL9602] No Fault, FailCount= 4 2018-12-05T04:15:00.815Z,1543983300.815 [NAL9602](INFO): Powering up NAL9602 2018-12-05T04:15:12.452Z,1543983312.452 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:15:21.676Z,1543983321.676 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:15:21.677Z,1543983321.677 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-05T04:15:21.677Z,1543983321.677 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:15:21.679Z,1543983321.679 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:15:21.679Z,1543983321.679 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-05T04:15:21.679Z,1543983321.679 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:15:21.693Z,1543983321.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:15:21.693Z,1543983321.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:15:22.094Z,1543983322.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:15:22.094Z,1543983322.094 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-05T04:15:22.094Z,1543983322.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:15:22.094Z,1543983322.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-05T04:15:22.482Z,1543983322.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:15:22.482Z,1543983322.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:15:22.483Z,1543983322.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:15:22.483Z,1543983322.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:15:22.483Z,1543983322.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:15:22.484Z,1543983322.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:17:22.517Z,1543983442.517 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:17:22.517Z,1543983442.517 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-05T04:17:22.517Z,1543983442.517 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:17:22.520Z,1543983442.520 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:17:22.520Z,1543983442.520 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-05T04:17:22.520Z,1543983442.520 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:17:22.533Z,1543983442.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:17:22.533Z,1543983442.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:17:22.930Z,1543983442.930 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:17:22.931Z,1543983442.931 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-05T04:17:22.931Z,1543983442.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:17:22.931Z,1543983442.931 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-05T04:17:23.338Z,1543983443.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:17:23.338Z,1543983443.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:17:23.339Z,1543983443.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:17:23.339Z,1543983443.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:17:23.339Z,1543983443.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:17:23.340Z,1543983443.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:19:18.631Z,1543983558.631 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T04:14:17.3Z 2018-12-05T04:19:18.631Z,1543983558.631 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T04:19:18.631Z,1543983558.631 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T04:19:23.683Z,1543983563.683 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:19:23.683Z,1543983563.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-05T04:19:23.683Z,1543983563.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:19:23.685Z,1543983563.685 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:19:23.685Z,1543983563.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-05T04:19:23.685Z,1543983563.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:19:23.699Z,1543983563.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:19:23.699Z,1543983563.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:19:23.736Z,1543983563.736 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0540.lzma 2018-12-05T04:19:23.850Z,1543983563.850 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:19:23.850Z,1543983563.850 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-05T04:19:23.851Z,1543983563.851 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:19:23.851Z,1543983563.851 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-05T04:19:24.138Z,1543983564.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:19:24.138Z,1543983564.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:19:24.138Z,1543983564.138 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:19:24.139Z,1543983564.139 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:19:24.139Z,1543983564.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:19:24.140Z,1543983564.140 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:19:24.509Z,1543983564.509 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0540.lzma.bak 2018-12-05T04:19:24.509Z,1543983564.509 [DataOverHttps](INFO): SBD MOMSN=8967307 2018-12-05T04:19:33.921Z,1543983573.921 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0541.lzma 2018-12-05T04:19:34.722Z,1543983574.722 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0541.lzma.bak 2018-12-05T04:19:34.732Z,1543983574.732 [DataOverHttps](INFO): SBD MOMSN=8967309 2018-12-05T04:19:36.070Z,1543983576.070 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T04:19:36.070Z,1543983576.070 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T04:19:36.070Z,1543983576.070 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T04:20:15.516Z,1543983615.516 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T04:20:46.323Z,1543983646.323 [NAL9602](INFO): Powering down 2018-12-05T04:21:25.072Z,1543983685.072 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:21:25.072Z,1543983685.072 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-05T04:21:25.073Z,1543983685.073 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:21:25.102Z,1543983685.102 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:21:25.102Z,1543983685.102 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-05T04:21:25.102Z,1543983685.102 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:21:25.116Z,1543983685.116 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:21:25.117Z,1543983685.117 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:21:25.117Z,1543983685.117 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:21:25.117Z,1543983685.117 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:24:36.411Z,1543983876.411 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T04:24:36.411Z,1543983876.411 [Default:CheckIn:C.Wait] Stopped 2018-12-05T04:24:36.411Z,1543983876.411 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T04:24:36.411Z,1543983876.411 [Default:CheckIn:D] Running Loop=1 2018-12-05T04:24:36.819Z,1543983876.819 [Default:CheckIn:D] Stopped 2018-12-05T04:24:36.819Z,1543983876.819 [Default:CheckIn:E] Running Loop=1 2018-12-05T04:24:37.209Z,1543983877.209 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1869.746615 min 2018-12-05T04:24:37.210Z,1543983877.210 [Default:CheckIn:E] Stopped 2018-12-05T04:24:37.210Z,1543983877.210 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T04:24:37.210Z,1543983877.210 [Default:CheckIn] Stopped 2018-12-05T04:24:37.211Z,1543983877.211 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T04:24:37.211Z,1543983877.211 [Default:CheckIn](INFO): Running loop #182 2018-12-05T04:24:37.211Z,1543983877.211 [Default:CheckIn] Running Loop=182 2018-12-05T04:24:37.211Z,1543983877.211 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T04:24:37.211Z,1543983877.211 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T04:24:37.984Z,1543983877.984 [NAL9602](INFO): Powering up 2018-12-05T04:24:49.188Z,1543983889.188 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:29:38.031Z,1543984178.031 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T04:24:37.2Z 2018-12-05T04:29:38.031Z,1543984178.031 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T04:29:38.031Z,1543984178.031 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T04:29:42.951Z,1543984182.951 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0543.lzma 2018-12-05T04:29:43.726Z,1543984183.726 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0543.lzma.bak 2018-12-05T04:29:43.726Z,1543984183.726 [DataOverHttps](INFO): SBD MOMSN=8967331 2018-12-05T04:29:53.509Z,1543984193.509 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T04:29:53.566Z,1543984193.566 [DataOverHttps](INFO): Sending 340 bytes from file Logs/20181203T211451/Express0544.lzma 2018-12-05T04:29:54.365Z,1543984194.365 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0544.lzma.bak 2018-12-05T04:29:54.366Z,1543984194.366 [DataOverHttps](INFO): SBD MOMSN=8967333 2018-12-05T04:29:55.699Z,1543984195.699 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T04:29:55.699Z,1543984195.699 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T04:29:55.699Z,1543984195.699 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T04:30:23.675Z,1543984223.675 [NAL9602](INFO): Powering down 2018-12-05T04:34:56.204Z,1543984496.204 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T04:34:56.204Z,1543984496.204 [Default:CheckIn:C.Wait] Stopped 2018-12-05T04:34:56.205Z,1543984496.205 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T04:34:56.205Z,1543984496.205 [Default:CheckIn:D] Running Loop=1 2018-12-05T04:34:56.567Z,1543984496.567 [Default:CheckIn:D] Stopped 2018-12-05T04:34:56.567Z,1543984496.567 [Default:CheckIn:E] Running Loop=1 2018-12-05T04:34:56.975Z,1543984496.975 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1880.075781 min 2018-12-05T04:34:56.975Z,1543984496.975 [Default:CheckIn:E] Stopped 2018-12-05T04:34:56.976Z,1543984496.976 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T04:34:56.976Z,1543984496.976 [Default:CheckIn] Stopped 2018-12-05T04:34:56.976Z,1543984496.976 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T04:34:56.976Z,1543984496.976 [Default:CheckIn](INFO): Running loop #183 2018-12-05T04:34:56.976Z,1543984496.976 [Default:CheckIn] Running Loop=183 2018-12-05T04:34:56.976Z,1543984496.976 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T04:34:56.976Z,1543984496.976 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T04:34:57.736Z,1543984497.736 [NAL9602](INFO): Powering up 2018-12-05T04:35:08.540Z,1543984508.540 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:35:09.340Z,1543984509.340 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T04:35:09.340Z,1543984509.340 [NAL9602] Data Fault, FailCount= 5 2018-12-05T04:35:09.340Z,1543984509.340 [NAL9602](ERROR): Data Fault 2018-12-05T04:35:09.395Z,1543984509.395 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T04:35:09.396Z,1543984509.396 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T04:35:09.736Z,1543984509.736 [NAL9602](INFO): Powering down 2018-12-05T04:35:09.784Z,1543984509.784 [CBIT](INFO): Critical error at 20181205T043509 2018-12-05T04:36:26.646Z,1543984586.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:36:26.646Z,1543984586.646 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-05T04:36:26.647Z,1543984586.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:36:26.647Z,1543984586.647 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-05T04:36:26.732Z,1543984586.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:36:26.733Z,1543984586.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:36:26.733Z,1543984586.733 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:36:26.733Z,1543984586.733 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:36:26.734Z,1543984586.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:36:26.734Z,1543984586.734 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:37:03.011Z,1543984623.011 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T04:37:03.011Z,1543984623.011 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T04:37:03.012Z,1543984623.012 [DropWeight](ERROR): Hardware Fault 2018-12-05T04:37:03.044Z,1543984623.044 [CBIT](INFO): Critical error at 20181205T043703 2018-12-05T04:37:03.071Z,1543984623.071 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T04:37:03.071Z,1543984623.071 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T04:37:03.447Z,1543984623.447 [CBIT](INFO): Critical error at 20181205T043703 2018-12-05T04:37:09.448Z,1543984629.448 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T04:37:09.448Z,1543984629.448 [NAL9602] No Fault, FailCount= 5 2018-12-05T04:37:09.807Z,1543984629.807 [NAL9602](INFO): Powering up NAL9602 2018-12-05T04:37:21.007Z,1543984641.007 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:38:26.739Z,1543984706.739 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:38:26.739Z,1543984706.739 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-05T04:38:26.739Z,1543984706.739 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:38:26.741Z,1543984706.741 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:38:26.741Z,1543984706.741 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-05T04:38:26.742Z,1543984706.742 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:38:26.755Z,1543984706.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:38:26.756Z,1543984706.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:38:27.152Z,1543984707.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:38:27.152Z,1543984707.152 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-05T04:38:27.152Z,1543984707.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:38:27.153Z,1543984707.153 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-05T04:38:27.538Z,1543984707.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:38:27.538Z,1543984707.538 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:38:27.539Z,1543984707.539 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:38:27.539Z,1543984707.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:38:27.540Z,1543984707.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:38:27.540Z,1543984707.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:39:58.019Z,1543984798.019 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T04:34:56.0Z 2018-12-05T04:39:58.019Z,1543984798.019 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T04:39:58.019Z,1543984798.019 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T04:40:03.239Z,1543984803.239 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181203T211451/Courier0546.lzma 2018-12-05T04:40:04.009Z,1543984804.009 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0546.lzma.bak 2018-12-05T04:40:04.009Z,1543984804.009 [DataOverHttps](INFO): SBD MOMSN=8967350 2018-12-05T04:40:13.502Z,1543984813.502 [DataOverHttps](INFO): Sending 268 bytes from file Logs/20181203T211451/Express0547.lzma 2018-12-05T04:40:14.301Z,1543984814.301 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0547.lzma.bak 2018-12-05T04:40:14.301Z,1543984814.301 [DataOverHttps](INFO): SBD MOMSN=8967355 2018-12-05T04:40:15.656Z,1543984815.656 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T04:40:15.656Z,1543984815.656 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T04:40:15.656Z,1543984815.656 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T04:40:27.540Z,1543984827.540 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:40:27.540Z,1543984827.540 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-05T04:40:27.540Z,1543984827.540 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:40:27.542Z,1543984827.542 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:40:27.542Z,1543984827.542 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-05T04:40:27.542Z,1543984827.542 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:40:27.584Z,1543984827.584 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:40:27.585Z,1543984827.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:40:27.960Z,1543984827.960 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:40:27.960Z,1543984827.960 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-05T04:40:27.961Z,1543984827.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:40:27.961Z,1543984827.961 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-05T04:40:28.330Z,1543984828.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:40:28.330Z,1543984828.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:40:28.331Z,1543984828.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:40:28.331Z,1543984828.331 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:40:28.331Z,1543984828.331 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:40:28.332Z,1543984828.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:40:47.583Z,1543984847.583 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size. 2018-12-05T04:40:58.378Z,1543984858.378 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T04:42:24.375Z,1543984944.375 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T04:42:28.398Z,1543984948.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:42:28.398Z,1543984948.398 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-05T04:42:28.398Z,1543984948.398 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:42:28.400Z,1543984948.400 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:42:28.400Z,1543984948.400 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-05T04:42:28.401Z,1543984948.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:42:28.456Z,1543984948.456 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:42:28.456Z,1543984948.456 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:42:28.810Z,1543984948.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:42:28.810Z,1543984948.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-05T04:42:28.835Z,1543984948.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:42:28.835Z,1543984948.835 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-05T04:42:29.194Z,1543984949.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:42:29.194Z,1543984949.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:42:29.195Z,1543984949.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:42:29.195Z,1543984949.195 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:42:29.195Z,1543984949.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:42:29.196Z,1543984949.196 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:42:55.119Z,1543984975.119 [NAL9602](INFO): Powering down 2018-12-05T04:44:29.224Z,1543985069.224 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:44:29.224Z,1543985069.224 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-05T04:44:29.224Z,1543985069.224 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:44:29.226Z,1543985069.226 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:44:29.226Z,1543985069.226 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-05T04:44:29.226Z,1543985069.226 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:44:29.240Z,1543985069.240 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:44:29.240Z,1543985069.240 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:44:29.642Z,1543985069.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:44:29.642Z,1543985069.642 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-05T04:44:29.643Z,1543985069.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:44:29.643Z,1543985069.643 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-05T04:44:30.030Z,1543985070.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:44:30.030Z,1543985070.030 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:44:30.031Z,1543985070.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:44:30.031Z,1543985070.031 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:44:30.031Z,1543985070.031 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:44:30.032Z,1543985070.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:45:15.982Z,1543985115.982 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T04:45:15.982Z,1543985115.982 [Default:CheckIn:C.Wait] Stopped 2018-12-05T04:45:15.982Z,1543985115.982 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T04:45:15.982Z,1543985115.982 [Default:CheckIn:D] Running Loop=1 2018-12-05T04:45:16.386Z,1543985116.386 [Default:CheckIn:D] Stopped 2018-12-05T04:45:16.386Z,1543985116.386 [Default:CheckIn:E] Running Loop=1 2018-12-05T04:45:16.777Z,1543985116.777 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1890.406120 min 2018-12-05T04:45:16.777Z,1543985116.777 [Default:CheckIn:E] Stopped 2018-12-05T04:45:16.777Z,1543985116.777 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T04:45:16.777Z,1543985116.777 [Default:CheckIn] Stopped 2018-12-05T04:45:16.778Z,1543985116.778 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T04:45:16.778Z,1543985116.778 [Default:CheckIn](INFO): Running loop #184 2018-12-05T04:45:16.778Z,1543985116.778 [Default:CheckIn] Running Loop=184 2018-12-05T04:45:16.778Z,1543985116.778 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T04:45:16.778Z,1543985116.778 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T04:45:17.558Z,1543985117.558 [NAL9602](INFO): Powering up 2018-12-05T04:45:28.752Z,1543985128.752 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:46:00.700Z,1543985160.700 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T04:46:00.782Z,1543985160.782 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T04:46:00.782Z,1543985160.782 [NAL9602] Data Fault, FailCount= 1 2018-12-05T04:46:00.782Z,1543985160.782 [NAL9602](ERROR): Data Fault 2018-12-05T04:46:00.849Z,1543985160.849 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T04:46:01.099Z,1543985161.099 [NAL9602](INFO): Powering down 2018-12-05T04:46:01.951Z,1543985161.951 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T04:46:01.951Z,1543985161.951 [NAL9602] No Fault, FailCount= 1 2018-12-05T04:46:30.402Z,1543985190.402 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:46:30.402Z,1543985190.402 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-05T04:46:30.402Z,1543985190.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:46:30.404Z,1543985190.404 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:46:30.404Z,1543985190.404 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-05T04:46:30.405Z,1543985190.405 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:46:30.418Z,1543985190.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:46:30.418Z,1543985190.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:46:30.810Z,1543985190.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:46:30.810Z,1543985190.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-05T04:46:30.811Z,1543985190.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:46:30.811Z,1543985190.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-05T04:46:31.178Z,1543985191.178 [NAL9602](INFO): Powering up NAL9602 2018-12-05T04:46:31.202Z,1543985191.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:46:31.202Z,1543985191.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:46:31.203Z,1543985191.203 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:46:31.203Z,1543985191.203 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:46:31.203Z,1543985191.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:46:31.204Z,1543985191.204 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:46:42.375Z,1543985202.375 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:48:31.948Z,1543985311.948 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:48:31.948Z,1543985311.948 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-05T04:48:31.948Z,1543985311.948 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:48:31.951Z,1543985311.951 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:48:31.951Z,1543985311.951 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-05T04:48:31.951Z,1543985311.951 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:48:31.965Z,1543985311.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:48:31.965Z,1543985311.965 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:48:32.083Z,1543985312.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:48:32.083Z,1543985312.083 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-05T04:48:32.084Z,1543985312.084 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:48:32.084Z,1543985312.084 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-05T04:48:32.418Z,1543985312.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:48:32.419Z,1543985312.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:48:32.419Z,1543985312.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:48:32.419Z,1543985312.419 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:48:32.420Z,1543985312.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:48:32.420Z,1543985312.420 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:50:17.714Z,1543985417.714 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T04:45:16.8Z 2018-12-05T04:50:17.714Z,1543985417.714 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T04:50:17.715Z,1543985417.715 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T04:50:22.669Z,1543985422.669 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0549.lzma 2018-12-05T04:50:23.461Z,1543985423.461 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0549.lzma.bak 2018-12-05T04:50:23.461Z,1543985423.461 [DataOverHttps](INFO): SBD MOMSN=8967371 2018-12-05T04:50:33.050Z,1543985433.050 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T04:50:33.069Z,1543985433.069 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:50:33.069Z,1543985433.069 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-05T04:50:33.069Z,1543985433.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:50:33.071Z,1543985433.071 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:50:33.072Z,1543985433.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-05T04:50:33.072Z,1543985433.072 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:50:33.085Z,1543985433.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:50:33.085Z,1543985433.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:50:33.119Z,1543985433.119 [DataOverHttps](INFO): Sending 329 bytes from file Logs/20181203T211451/Express0550.lzma 2018-12-05T04:50:33.219Z,1543985433.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:50:33.219Z,1543985433.219 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-05T04:50:33.220Z,1543985433.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:50:33.220Z,1543985433.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-05T04:50:33.530Z,1543985433.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:50:33.531Z,1543985433.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:50:33.531Z,1543985433.531 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:50:33.531Z,1543985433.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:50:33.532Z,1543985433.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:50:33.532Z,1543985433.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:50:33.897Z,1543985433.897 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0550.lzma.bak 2018-12-05T04:50:33.897Z,1543985433.897 [DataOverHttps](INFO): SBD MOMSN=8967373 2018-12-05T04:50:35.264Z,1543985435.264 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T04:50:35.264Z,1543985435.264 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T04:50:35.264Z,1543985435.264 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T04:51:03.263Z,1543985463.263 [NAL9602](INFO): Powering down 2018-12-05T04:52:03.424Z,1543985523.424 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T04:52:03.424Z,1543985523.424 [DropWeight] No Fault, FailCount= 1 2018-12-05T04:52:33.782Z,1543985553.782 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:52:33.782Z,1543985553.782 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-05T04:52:33.783Z,1543985553.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:52:33.785Z,1543985553.785 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:52:33.785Z,1543985553.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-05T04:52:33.785Z,1543985553.785 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:52:33.799Z,1543985553.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:52:33.799Z,1543985553.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:52:34.194Z,1543985554.194 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:52:34.194Z,1543985554.194 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-05T04:52:34.195Z,1543985554.195 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:52:34.195Z,1543985554.195 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-05T04:52:34.579Z,1543985554.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:52:34.579Z,1543985554.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:52:34.579Z,1543985554.579 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:52:34.580Z,1543985554.580 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:52:34.580Z,1543985554.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:52:34.580Z,1543985554.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:54:34.892Z,1543985674.892 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:54:34.892Z,1543985674.892 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-05T04:54:34.892Z,1543985674.892 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:54:34.894Z,1543985674.894 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:54:34.895Z,1543985674.895 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-05T04:54:34.895Z,1543985674.895 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:54:34.920Z,1543985674.920 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:54:34.920Z,1543985674.920 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:54:35.337Z,1543985675.337 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:54:35.337Z,1543985675.337 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-05T04:54:35.338Z,1543985675.338 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:54:35.338Z,1543985675.338 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-05T04:54:35.692Z,1543985675.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:54:35.693Z,1543985675.693 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:54:35.693Z,1543985675.693 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:54:35.693Z,1543985675.693 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:54:35.694Z,1543985675.694 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:54:35.694Z,1543985675.694 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:55:35.418Z,1543985735.418 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T04:55:35.418Z,1543985735.418 [Default:CheckIn:C.Wait] Stopped 2018-12-05T04:55:35.419Z,1543985735.419 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T04:55:35.419Z,1543985735.419 [Default:CheckIn:D] Running Loop=1 2018-12-05T04:55:35.798Z,1543985735.798 [Default:CheckIn:D] Stopped 2018-12-05T04:55:35.798Z,1543985735.798 [Default:CheckIn:E] Running Loop=1 2018-12-05T04:55:36.174Z,1543985736.174 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1900.729557 min 2018-12-05T04:55:36.174Z,1543985736.174 [Default:CheckIn:E] Stopped 2018-12-05T04:55:36.174Z,1543985736.174 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T04:55:36.186Z,1543985736.186 [Default:CheckIn] Stopped 2018-12-05T04:55:36.186Z,1543985736.186 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T04:55:36.187Z,1543985736.187 [Default:CheckIn](INFO): Running loop #185 2018-12-05T04:55:36.187Z,1543985736.187 [Default:CheckIn] Running Loop=185 2018-12-05T04:55:36.187Z,1543985736.187 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T04:55:36.187Z,1543985736.187 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T04:55:36.952Z,1543985736.952 [NAL9602](INFO): Powering up 2018-12-05T04:55:47.752Z,1543985747.752 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:55:48.556Z,1543985748.556 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T04:55:48.556Z,1543985748.556 [NAL9602] Data Fault, FailCount= 2 2018-12-05T04:55:48.556Z,1543985748.556 [NAL9602](ERROR): Data Fault 2018-12-05T04:55:48.629Z,1543985748.629 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T04:55:48.952Z,1543985748.952 [NAL9602](INFO): Powering down 2018-12-05T04:55:49.785Z,1543985749.785 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T04:55:49.785Z,1543985749.785 [NAL9602] No Fault, FailCount= 2 2018-12-05T04:56:19.328Z,1543985779.328 [NAL9602](INFO): Powering up NAL9602 2018-12-05T04:56:31.407Z,1543985791.407 [NAL9602](INFO): NAL9602 initialized 2018-12-05T04:56:35.830Z,1543985795.830 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:56:35.830Z,1543985795.830 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-05T04:56:35.831Z,1543985795.831 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:56:35.833Z,1543985795.833 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:56:35.833Z,1543985795.833 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-05T04:56:35.833Z,1543985795.833 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:56:35.847Z,1543985795.847 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:56:35.847Z,1543985795.847 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:56:36.247Z,1543985796.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:56:36.247Z,1543985796.247 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-05T04:56:36.247Z,1543985796.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:56:36.247Z,1543985796.247 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-05T04:56:36.634Z,1543985796.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:56:36.634Z,1543985796.634 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:56:36.635Z,1543985796.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:56:36.635Z,1543985796.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:56:36.635Z,1543985796.635 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:56:36.636Z,1543985796.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:58:36.925Z,1543985916.925 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:58:36.925Z,1543985916.925 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-05T04:58:36.925Z,1543985916.925 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T04:58:36.928Z,1543985916.928 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T04:58:36.928Z,1543985916.928 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-05T04:58:36.928Z,1543985916.928 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T04:58:36.943Z,1543985916.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T04:58:36.943Z,1543985916.943 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T04:58:37.342Z,1543985917.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T04:58:37.342Z,1543985917.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-05T04:58:37.343Z,1543985917.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T04:58:37.343Z,1543985917.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-05T04:58:37.726Z,1543985917.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T04:58:37.727Z,1543985917.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:58:37.727Z,1543985917.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T04:58:37.727Z,1543985917.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T04:58:37.728Z,1543985917.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T04:58:37.728Z,1543985917.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:00:37.395Z,1543986037.395 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T04:55:36.2Z 2018-12-05T05:00:37.395Z,1543986037.395 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T05:00:37.395Z,1543986037.395 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T05:00:38.313Z,1543986038.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:00:38.313Z,1543986038.313 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-05T05:00:38.313Z,1543986038.313 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:00:38.315Z,1543986038.315 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:00:38.315Z,1543986038.315 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-05T05:00:38.315Z,1543986038.315 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:00:38.329Z,1543986038.329 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:00:38.330Z,1543986038.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:00:38.462Z,1543986038.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:00:38.463Z,1543986038.463 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-05T05:00:38.463Z,1543986038.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:00:38.463Z,1543986038.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-05T05:00:38.802Z,1543986038.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:00:38.802Z,1543986038.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:00:38.803Z,1543986038.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:00:38.803Z,1543986038.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:00:38.804Z,1543986038.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:00:38.804Z,1543986038.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:00:42.386Z,1543986042.386 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0552.lzma 2018-12-05T05:00:43.185Z,1543986043.185 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0552.lzma.bak 2018-12-05T05:00:43.185Z,1543986043.185 [DataOverHttps](INFO): SBD MOMSN=8967395 2018-12-05T05:00:52.780Z,1543986052.780 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0553.lzma 2018-12-05T05:00:53.544Z,1543986053.544 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0553.lzma.bak 2018-12-05T05:00:53.544Z,1543986053.544 [DataOverHttps](INFO): SBD MOMSN=8967397 2018-12-05T05:00:54.903Z,1543986054.903 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T05:00:54.903Z,1543986054.903 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T05:00:54.903Z,1543986054.903 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T05:01:34.620Z,1543986094.620 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T05:02:05.411Z,1543986125.411 [NAL9602](INFO): Powering down 2018-12-05T05:02:39.050Z,1543986159.050 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:02:39.050Z,1543986159.050 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-05T05:02:39.050Z,1543986159.050 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:02:39.052Z,1543986159.052 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:02:39.052Z,1543986159.052 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-05T05:02:39.053Z,1543986159.053 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:02:39.067Z,1543986159.067 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:02:39.068Z,1543986159.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:02:39.465Z,1543986159.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:02:39.465Z,1543986159.465 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-05T05:02:39.466Z,1543986159.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:02:39.466Z,1543986159.466 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-05T05:02:39.836Z,1543986159.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:02:39.836Z,1543986159.836 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:02:39.837Z,1543986159.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:02:39.837Z,1543986159.837 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:02:39.838Z,1543986159.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:02:39.838Z,1543986159.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:04:40.135Z,1543986280.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:04:40.135Z,1543986280.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-05T05:04:40.135Z,1543986280.135 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:04:40.137Z,1543986280.137 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:04:40.137Z,1543986280.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-05T05:04:40.138Z,1543986280.138 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:04:40.151Z,1543986280.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:04:40.151Z,1543986280.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:04:40.554Z,1543986280.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:04:40.554Z,1543986280.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-05T05:04:40.554Z,1543986280.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:04:40.555Z,1543986280.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-05T05:04:40.938Z,1543986280.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:04:40.939Z,1543986280.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:04:40.939Z,1543986280.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:04:40.939Z,1543986280.939 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:04:40.940Z,1543986280.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:04:40.940Z,1543986280.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:05:55.098Z,1543986355.098 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T05:05:55.098Z,1543986355.098 [Default:CheckIn:C.Wait] Stopped 2018-12-05T05:05:55.099Z,1543986355.099 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T05:05:55.099Z,1543986355.099 [Default:CheckIn:D] Running Loop=1 2018-12-05T05:05:55.507Z,1543986355.507 [Default:CheckIn:D] Stopped 2018-12-05T05:05:55.507Z,1543986355.507 [Default:CheckIn:E] Running Loop=1 2018-12-05T05:05:55.897Z,1543986355.897 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1911.058073 min 2018-12-05T05:05:55.898Z,1543986355.898 [Default:CheckIn:E] Stopped 2018-12-05T05:05:55.898Z,1543986355.898 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T05:05:55.898Z,1543986355.898 [Default:CheckIn] Stopped 2018-12-05T05:05:55.898Z,1543986355.898 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T05:05:55.899Z,1543986355.899 [Default:CheckIn](INFO): Running loop #186 2018-12-05T05:05:55.899Z,1543986355.899 [Default:CheckIn] Running Loop=186 2018-12-05T05:05:55.899Z,1543986355.899 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T05:05:55.899Z,1543986355.899 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T05:05:56.671Z,1543986356.671 [NAL9602](INFO): Powering up 2018-12-05T05:06:07.472Z,1543986367.472 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:06:39.436Z,1543986399.436 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T05:06:39.518Z,1543986399.518 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T05:06:39.518Z,1543986399.518 [NAL9602] Data Fault, FailCount= 3 2018-12-05T05:06:39.518Z,1543986399.518 [NAL9602](ERROR): Data Fault 2018-12-05T05:06:39.569Z,1543986399.569 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T05:06:39.836Z,1543986399.836 [NAL9602](INFO): Powering down 2018-12-05T05:06:40.703Z,1543986400.703 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T05:06:40.703Z,1543986400.703 [NAL9602] No Fault, FailCount= 3 2018-12-05T05:06:41.052Z,1543986401.052 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:06:41.052Z,1543986401.052 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-05T05:06:41.052Z,1543986401.052 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:06:41.054Z,1543986401.054 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:06:41.054Z,1543986401.054 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-05T05:06:41.054Z,1543986401.054 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:06:41.068Z,1543986401.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:06:41.068Z,1543986401.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:06:41.491Z,1543986401.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:06:41.491Z,1543986401.491 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-05T05:06:41.491Z,1543986401.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:06:41.491Z,1543986401.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-05T05:06:41.862Z,1543986401.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:06:41.862Z,1543986401.862 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:06:41.863Z,1543986401.863 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:06:41.863Z,1543986401.863 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:06:41.863Z,1543986401.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:06:41.864Z,1543986401.864 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:07:10.178Z,1543986430.178 [NAL9602](INFO): Powering up NAL9602 2018-12-05T05:07:20.987Z,1543986440.987 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:07:21.787Z,1543986441.787 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T05:07:21.787Z,1543986441.787 [NAL9602] Data Fault, FailCount= 4 2018-12-05T05:07:21.787Z,1543986441.787 [NAL9602](ERROR): Data Fault 2018-12-05T05:07:21.821Z,1543986441.821 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T05:07:22.180Z,1543986442.180 [NAL9602](INFO): Powering down 2018-12-05T05:07:25.715Z,1543986445.715 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T05:07:25.715Z,1543986445.715 [NAL9602] No Fault, FailCount= 4 2018-12-05T05:07:52.528Z,1543986472.528 [NAL9602](INFO): Powering up NAL9602 2018-12-05T05:08:03.696Z,1543986483.696 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:08:42.255Z,1543986522.255 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:08:42.255Z,1543986522.255 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-05T05:08:42.255Z,1543986522.255 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:08:42.257Z,1543986522.257 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:08:42.257Z,1543986522.257 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-05T05:08:42.257Z,1543986522.257 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:08:42.298Z,1543986522.298 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:08:42.299Z,1543986522.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:08:42.674Z,1543986522.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:08:42.674Z,1543986522.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-05T05:08:42.675Z,1543986522.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:08:42.675Z,1543986522.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-05T05:08:43.063Z,1543986523.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:08:43.063Z,1543986523.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:08:43.064Z,1543986523.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:08:43.064Z,1543986523.064 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:08:43.064Z,1543986523.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:08:43.065Z,1543986523.065 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:10:43.453Z,1543986643.453 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:10:43.453Z,1543986643.453 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-05T05:10:43.453Z,1543986643.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:10:43.455Z,1543986643.455 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:10:43.456Z,1543986643.456 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-05T05:10:43.456Z,1543986643.456 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:10:43.470Z,1543986643.470 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:10:43.470Z,1543986643.470 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:10:43.865Z,1543986643.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:10:43.865Z,1543986643.865 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-05T05:10:43.866Z,1543986643.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:10:43.866Z,1543986643.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-05T05:10:44.262Z,1543986644.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:10:44.262Z,1543986644.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:10:44.263Z,1543986644.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:10:44.263Z,1543986644.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:10:44.264Z,1543986644.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:10:44.264Z,1543986644.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:10:56.939Z,1543986656.939 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T05:05:55.9Z 2018-12-05T05:10:56.939Z,1543986656.939 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T05:10:56.939Z,1543986656.939 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T05:11:01.969Z,1543986661.969 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0555.lzma 2018-12-05T05:11:02.753Z,1543986662.753 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0555.lzma.bak 2018-12-05T05:11:02.753Z,1543986662.753 [DataOverHttps](INFO): SBD MOMSN=8967419 2018-12-05T05:11:12.062Z,1543986672.062 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T05:11:12.134Z,1543986672.134 [DataOverHttps](INFO): Sending 356 bytes from file Logs/20181203T211451/Express0556.lzma 2018-12-05T05:11:12.909Z,1543986672.909 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0556.lzma.bak 2018-12-05T05:11:12.909Z,1543986672.909 [DataOverHttps](INFO): SBD MOMSN=8967421 2018-12-05T05:11:14.247Z,1543986674.247 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T05:11:14.247Z,1543986674.247 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T05:11:14.248Z,1543986674.248 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T05:11:42.561Z,1543986702.561 [NAL9602](INFO): Powering down 2018-12-05T05:12:44.626Z,1543986764.626 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:12:44.626Z,1543986764.626 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-05T05:12:44.626Z,1543986764.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:12:44.628Z,1543986764.628 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:12:44.629Z,1543986764.629 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-05T05:12:44.629Z,1543986764.629 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:12:44.642Z,1543986764.642 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:12:44.642Z,1543986764.642 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:12:45.033Z,1543986765.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:12:45.033Z,1543986765.033 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-05T05:12:45.033Z,1543986765.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:12:45.034Z,1543986765.034 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-05T05:12:45.418Z,1543986765.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:12:45.423Z,1543986765.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:12:45.423Z,1543986765.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:12:45.423Z,1543986765.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:12:45.424Z,1543986765.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:12:45.424Z,1543986765.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:14:45.722Z,1543986885.722 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:14:45.722Z,1543986885.722 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-05T05:14:45.722Z,1543986885.722 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:14:45.725Z,1543986885.725 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:14:45.725Z,1543986885.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-05T05:14:45.725Z,1543986885.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:14:45.738Z,1543986885.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:14:45.738Z,1543986885.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:14:48.990Z,1543986888.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:14:48.990Z,1543986888.990 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-05T05:14:48.991Z,1543986888.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:14:48.991Z,1543986888.991 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-05T05:14:49.061Z,1543986889.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:14:49.061Z,1543986889.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:14:49.062Z,1543986889.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:14:49.066Z,1543986889.066 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:14:49.067Z,1543986889.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:14:49.067Z,1543986889.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:16:14.426Z,1543986974.426 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T05:16:14.426Z,1543986974.426 [Default:CheckIn:C.Wait] Stopped 2018-12-05T05:16:14.426Z,1543986974.426 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T05:16:14.426Z,1543986974.426 [Default:CheckIn:D] Running Loop=1 2018-12-05T05:16:14.823Z,1543986974.823 [Default:CheckIn:D] Stopped 2018-12-05T05:16:14.823Z,1543986974.823 [Default:CheckIn:E] Running Loop=1 2018-12-05T05:16:15.226Z,1543986975.226 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1921.379948 min 2018-12-05T05:16:15.227Z,1543986975.227 [Default:CheckIn:E] Stopped 2018-12-05T05:16:15.227Z,1543986975.227 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T05:16:15.227Z,1543986975.227 [Default:CheckIn] Stopped 2018-12-05T05:16:15.227Z,1543986975.227 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T05:16:15.227Z,1543986975.227 [Default:CheckIn](INFO): Running loop #187 2018-12-05T05:16:15.227Z,1543986975.227 [Default:CheckIn] Running Loop=187 2018-12-05T05:16:15.227Z,1543986975.227 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T05:16:15.228Z,1543986975.228 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T05:16:15.993Z,1543986975.993 [NAL9602](INFO): Powering up 2018-12-05T05:16:27.196Z,1543986987.196 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:16:49.183Z,1543987009.183 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:16:49.183Z,1543987009.183 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-05T05:16:49.183Z,1543987009.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:16:49.185Z,1543987009.185 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:16:49.185Z,1543987009.185 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-05T05:16:49.186Z,1543987009.186 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:16:49.200Z,1543987009.200 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:16:49.200Z,1543987009.200 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:16:49.612Z,1543987009.612 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:16:49.612Z,1543987009.612 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-05T05:16:49.612Z,1543987009.612 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:16:49.612Z,1543987009.612 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-05T05:16:49.973Z,1543987009.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:16:49.973Z,1543987009.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:16:49.973Z,1543987009.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:16:49.974Z,1543987009.974 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:16:49.975Z,1543987009.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:16:49.975Z,1543987009.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:16:59.156Z,1543987019.156 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T05:16:59.234Z,1543987019.234 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T05:16:59.234Z,1543987019.234 [NAL9602] Data Fault, FailCount= 5 2018-12-05T05:16:59.234Z,1543987019.234 [NAL9602](ERROR): Data Fault 2018-12-05T05:16:59.307Z,1543987019.307 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T05:16:59.308Z,1543987019.308 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T05:16:59.556Z,1543987019.556 [NAL9602](INFO): Powering down 2018-12-05T05:16:59.622Z,1543987019.622 [CBIT](INFO): Critical error at 20181205T051659 2018-12-05T05:18:49.979Z,1543987129.979 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:18:49.979Z,1543987129.979 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-05T05:18:49.979Z,1543987129.979 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:18:49.981Z,1543987129.981 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:18:49.981Z,1543987129.981 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-05T05:18:49.981Z,1543987129.981 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:18:49.995Z,1543987129.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:18:49.995Z,1543987129.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:18:50.392Z,1543987130.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:18:50.392Z,1543987130.392 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-05T05:18:50.393Z,1543987130.393 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:18:50.393Z,1543987130.393 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-05T05:18:50.786Z,1543987130.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:18:50.787Z,1543987130.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:18:50.787Z,1543987130.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:18:50.788Z,1543987130.788 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:18:50.788Z,1543987130.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:18:50.788Z,1543987130.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:18:59.244Z,1543987139.244 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T05:18:59.244Z,1543987139.244 [NAL9602] No Fault, FailCount= 5 2018-12-05T05:18:59.600Z,1543987139.600 [NAL9602](INFO): Powering up NAL9602 2018-12-05T05:19:10.800Z,1543987150.800 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:19:11.604Z,1543987151.604 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T05:19:11.604Z,1543987151.604 [NAL9602] Data Fault, FailCount= 1 2018-12-05T05:19:11.604Z,1543987151.604 [NAL9602](ERROR): Data Fault 2018-12-05T05:19:11.671Z,1543987151.671 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T05:19:11.000Z,1543987152.000 [NAL9602](INFO): Powering down 2018-12-05T05:19:12.844Z,1543987152.844 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T05:19:12.844Z,1543987152.844 [NAL9602] No Fault, FailCount= 1 2018-12-05T05:19:42.352Z,1543987182.352 [NAL9602](INFO): Powering up NAL9602 2018-12-05T05:19:53.556Z,1543987193.556 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:20:50.863Z,1543987250.863 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:20:50.863Z,1543987250.863 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-05T05:20:50.863Z,1543987250.863 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:20:50.865Z,1543987250.865 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:20:50.865Z,1543987250.865 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-05T05:20:50.865Z,1543987250.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:20:50.937Z,1543987250.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:20:50.937Z,1543987250.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:20:51.270Z,1543987251.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:20:51.270Z,1543987251.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-05T05:20:51.270Z,1543987251.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:20:51.271Z,1543987251.271 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-05T05:20:51.670Z,1543987251.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:20:51.670Z,1543987251.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:20:51.671Z,1543987251.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:20:51.671Z,1543987251.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:20:51.672Z,1543987251.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:20:51.672Z,1543987251.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:21:16.399Z,1543987276.399 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T05:16:15.2Z 2018-12-05T05:21:16.399Z,1543987276.399 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T05:21:16.399Z,1543987276.399 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T05:21:21.376Z,1543987281.376 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0558.lzma 2018-12-05T05:21:22.177Z,1543987282.177 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0558.lzma.bak 2018-12-05T05:21:22.177Z,1543987282.177 [DataOverHttps](INFO): SBD MOMSN=8967447 2018-12-05T05:21:31.610Z,1543987291.610 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T05:21:31.697Z,1543987291.697 [DataOverHttps](INFO): Sending 343 bytes from file Logs/20181203T211451/Express0559.lzma 2018-12-05T05:21:32.493Z,1543987292.493 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0559.lzma.bak 2018-12-05T05:21:32.493Z,1543987292.493 [DataOverHttps](INFO): SBD MOMSN=8967450 2018-12-05T05:21:33.884Z,1543987293.884 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T05:21:33.884Z,1543987293.884 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T05:21:33.885Z,1543987293.885 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T05:22:01.995Z,1543987321.995 [NAL9602](INFO): Powering down 2018-12-05T05:22:04.795Z,1543987324.795 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T05:22:04.795Z,1543987324.795 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T05:22:04.795Z,1543987324.795 [DropWeight](ERROR): Hardware Fault 2018-12-05T05:22:04.871Z,1543987324.871 [CBIT](INFO): Critical error at 20181205T052204 2018-12-05T05:22:04.874Z,1543987324.874 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T05:22:04.874Z,1543987324.874 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T05:22:05.227Z,1543987325.227 [CBIT](INFO): Critical error at 20181205T052204 2018-12-05T05:22:51.822Z,1543987371.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:22:51.822Z,1543987371.822 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-05T05:22:51.823Z,1543987371.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:22:51.825Z,1543987371.825 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:22:51.825Z,1543987371.825 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-05T05:22:51.825Z,1543987371.825 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:22:51.839Z,1543987371.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:22:51.840Z,1543987371.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:22:52.228Z,1543987372.228 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:22:52.228Z,1543987372.228 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-05T05:22:52.229Z,1543987372.229 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:22:52.229Z,1543987372.229 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-05T05:22:52.622Z,1543987372.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:22:52.622Z,1543987372.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:22:52.623Z,1543987372.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:22:52.623Z,1543987372.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:22:52.623Z,1543987372.623 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:22:52.624Z,1543987372.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:24:52.751Z,1543987492.751 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:24:52.751Z,1543987492.751 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-05T05:24:52.751Z,1543987492.751 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:24:52.753Z,1543987492.753 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:24:52.753Z,1543987492.753 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-05T05:24:52.753Z,1543987492.753 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:24:52.767Z,1543987492.767 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:24:52.767Z,1543987492.767 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:24:53.174Z,1543987493.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:24:53.174Z,1543987493.174 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-05T05:24:53.175Z,1543987493.175 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:24:53.175Z,1543987493.175 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-05T05:24:53.548Z,1543987493.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:24:53.548Z,1543987493.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:24:53.549Z,1543987493.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:24:53.549Z,1543987493.549 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:24:53.550Z,1543987493.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:24:53.550Z,1543987493.550 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:26:33.986Z,1543987593.986 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T05:26:33.986Z,1543987593.986 [Default:CheckIn:C.Wait] Stopped 2018-12-05T05:26:33.987Z,1543987593.987 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T05:26:33.987Z,1543987593.987 [Default:CheckIn:D] Running Loop=1 2018-12-05T05:26:34.379Z,1543987594.379 [Default:CheckIn:D] Stopped 2018-12-05T05:26:34.380Z,1543987594.380 [Default:CheckIn:E] Running Loop=1 2018-12-05T05:26:34.781Z,1543987594.781 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1931.705990 min 2018-12-05T05:26:34.781Z,1543987594.781 [Default:CheckIn:E] Stopped 2018-12-05T05:26:34.781Z,1543987594.781 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T05:26:34.781Z,1543987594.781 [Default:CheckIn] Stopped 2018-12-05T05:26:34.781Z,1543987594.781 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T05:26:34.782Z,1543987594.782 [Default:CheckIn](INFO): Running loop #188 2018-12-05T05:26:34.782Z,1543987594.782 [Default:CheckIn] Running Loop=188 2018-12-05T05:26:34.782Z,1543987594.782 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T05:26:34.782Z,1543987594.782 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T05:26:35.551Z,1543987595.551 [NAL9602](INFO): Powering up 2018-12-05T05:26:46.751Z,1543987606.751 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:26:54.338Z,1543987614.338 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:26:54.339Z,1543987614.339 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-05T05:26:54.339Z,1543987614.339 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:26:54.341Z,1543987614.341 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:26:54.341Z,1543987614.341 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-05T05:26:54.341Z,1543987614.341 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:26:54.355Z,1543987614.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:26:54.355Z,1543987614.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:26:54.475Z,1543987614.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:26:54.475Z,1543987614.475 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-05T05:26:54.476Z,1543987614.476 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:26:54.476Z,1543987614.476 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-05T05:26:54.801Z,1543987614.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:26:54.802Z,1543987614.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:26:54.802Z,1543987614.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:26:54.802Z,1543987614.802 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:26:54.803Z,1543987614.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:26:54.803Z,1543987614.803 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:27:18.365Z,1543987638.365 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T05:27:18.438Z,1543987638.438 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T05:27:18.438Z,1543987638.438 [NAL9602] Data Fault, FailCount= 2 2018-12-05T05:27:18.438Z,1543987638.438 [NAL9602](ERROR): Data Fault 2018-12-05T05:27:18.504Z,1543987638.504 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T05:27:18.767Z,1543987638.767 [NAL9602](INFO): Powering down 2018-12-05T05:27:19.622Z,1543987639.622 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T05:27:19.622Z,1543987639.622 [NAL9602] No Fault, FailCount= 2 2018-12-05T05:27:48.799Z,1543987668.799 [NAL9602](INFO): Powering up NAL9602 2018-12-05T05:27:59.995Z,1543987679.995 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:28:55.135Z,1543987735.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:28:55.135Z,1543987735.135 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-05T05:28:55.136Z,1543987735.136 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:28:55.138Z,1543987735.138 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:28:55.138Z,1543987735.138 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-05T05:28:55.138Z,1543987735.138 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:28:55.151Z,1543987735.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:28:55.151Z,1543987735.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:28:55.558Z,1543987735.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:28:55.559Z,1543987735.559 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-05T05:28:55.559Z,1543987735.559 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:28:55.559Z,1543987735.559 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-05T05:28:55.939Z,1543987735.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:28:55.939Z,1543987735.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:28:55.940Z,1543987735.940 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:28:55.940Z,1543987735.940 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:28:55.941Z,1543987735.941 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:28:55.941Z,1543987735.941 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:30:56.074Z,1543987856.074 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:30:56.074Z,1543987856.074 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-05T05:30:56.074Z,1543987856.074 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:30:56.076Z,1543987856.076 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:30:56.077Z,1543987856.077 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-05T05:30:56.077Z,1543987856.077 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:30:56.090Z,1543987856.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:30:56.090Z,1543987856.090 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:30:56.482Z,1543987856.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:30:56.482Z,1543987856.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-05T05:30:56.483Z,1543987856.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:30:56.483Z,1543987856.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-05T05:30:56.874Z,1543987856.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:30:56.875Z,1543987856.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:30:56.875Z,1543987856.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:30:56.875Z,1543987856.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:30:56.876Z,1543987856.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:30:56.876Z,1543987856.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:31:35.976Z,1543987895.976 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T05:26:34.8Z 2018-12-05T05:31:35.976Z,1543987895.976 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T05:31:35.976Z,1543987895.976 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T05:31:41.111Z,1543987901.111 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0561.lzma 2018-12-05T05:31:41.893Z,1543987901.893 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0561.lzma.bak 2018-12-05T05:31:41.893Z,1543987901.893 [DataOverHttps](INFO): SBD MOMSN=8967475 2018-12-05T05:31:51.303Z,1543987911.303 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T05:31:51.380Z,1543987911.380 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20181203T211451/Express0562.lzma 2018-12-05T05:31:52.157Z,1543987912.157 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0562.lzma.bak 2018-12-05T05:31:52.157Z,1543987912.157 [DataOverHttps](INFO): SBD MOMSN=8967479 2018-12-05T05:31:53.539Z,1543987913.539 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T05:31:53.539Z,1543987913.539 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T05:31:53.539Z,1543987913.539 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T05:32:21.667Z,1543987941.667 [NAL9602](INFO): Powering down 2018-12-05T05:32:56.923Z,1543987976.923 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:32:56.923Z,1543987976.923 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-05T05:32:56.923Z,1543987976.923 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:32:56.925Z,1543987976.925 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:32:56.925Z,1543987976.925 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-05T05:32:56.925Z,1543987976.925 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:32:56.940Z,1543987976.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:32:56.940Z,1543987976.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:32:57.350Z,1543987977.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:32:57.350Z,1543987977.350 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-05T05:32:57.351Z,1543987977.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:32:57.351Z,1543987977.351 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-05T05:32:57.730Z,1543987977.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:32:57.730Z,1543987977.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:32:57.731Z,1543987977.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:32:57.731Z,1543987977.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:32:57.731Z,1543987977.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:32:57.732Z,1543987977.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:34:57.981Z,1543988097.981 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:34:57.981Z,1543988097.981 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-05T05:34:57.981Z,1543988097.981 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:34:57.983Z,1543988097.983 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:34:57.983Z,1543988097.983 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-05T05:34:57.983Z,1543988097.983 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:34:57.997Z,1543988097.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:34:57.997Z,1543988097.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:34:58.402Z,1543988098.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:34:58.402Z,1543988098.402 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-05T05:34:58.403Z,1543988098.403 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:34:58.403Z,1543988098.403 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-05T05:34:58.783Z,1543988098.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:34:58.784Z,1543988098.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:34:58.784Z,1543988098.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:34:58.784Z,1543988098.784 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:34:58.785Z,1543988098.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:34:58.785Z,1543988098.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:36:53.756Z,1543988213.756 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T05:36:53.757Z,1543988213.757 [Default:CheckIn:C.Wait] Stopped 2018-12-05T05:36:53.757Z,1543988213.757 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T05:36:53.757Z,1543988213.757 [Default:CheckIn:D] Running Loop=1 2018-12-05T05:36:54.158Z,1543988214.158 [Default:CheckIn:D] Stopped 2018-12-05T05:36:54.158Z,1543988214.158 [Default:CheckIn:E] Running Loop=1 2018-12-05T05:36:54.561Z,1543988214.561 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1942.035547 min 2018-12-05T05:36:54.561Z,1543988214.561 [Default:CheckIn:E] Stopped 2018-12-05T05:36:54.561Z,1543988214.561 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T05:36:54.561Z,1543988214.561 [Default:CheckIn] Stopped 2018-12-05T05:36:54.561Z,1543988214.561 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T05:36:54.561Z,1543988214.561 [Default:CheckIn](INFO): Running loop #189 2018-12-05T05:36:54.562Z,1543988214.562 [Default:CheckIn] Running Loop=189 2018-12-05T05:36:54.562Z,1543988214.562 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T05:36:54.562Z,1543988214.562 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T05:36:55.325Z,1543988215.325 [NAL9602](INFO): Powering up 2018-12-05T05:36:58.944Z,1543988218.944 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:36:58.944Z,1543988218.944 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-05T05:36:58.944Z,1543988218.944 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:36:58.960Z,1543988218.960 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:36:58.960Z,1543988218.960 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-05T05:36:58.961Z,1543988218.961 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:36:58.995Z,1543988218.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:36:58.996Z,1543988218.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:36:59.391Z,1543988219.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:36:59.391Z,1543988219.391 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-05T05:36:59.392Z,1543988219.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:36:59.392Z,1543988219.392 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-05T05:36:59.754Z,1543988219.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:36:59.754Z,1543988219.754 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:36:59.755Z,1543988219.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:36:59.755Z,1543988219.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:36:59.755Z,1543988219.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:36:59.756Z,1543988219.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:37:04.970Z,1543988224.970 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T05:37:04.970Z,1543988224.970 [DropWeight] No Fault, FailCount= 1 2018-12-05T05:37:06.135Z,1543988226.135 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:37:06.935Z,1543988226.935 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T05:37:06.935Z,1543988226.935 [NAL9602] Data Fault, FailCount= 3 2018-12-05T05:37:06.935Z,1543988226.935 [NAL9602](ERROR): Data Fault 2018-12-05T05:37:07.021Z,1543988227.021 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T05:37:07.330Z,1543988227.330 [NAL9602](INFO): Powering down 2018-12-05T05:37:08.207Z,1543988228.207 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T05:37:08.207Z,1543988228.207 [NAL9602] No Fault, FailCount= 3 2018-12-05T05:37:37.680Z,1543988257.680 [NAL9602](INFO): Powering up NAL9602 2018-12-05T05:37:49.640Z,1543988269.640 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:38:59.824Z,1543988339.824 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:38:59.824Z,1543988339.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-05T05:38:59.824Z,1543988339.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:38:59.826Z,1543988339.826 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:38:59.826Z,1543988339.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-05T05:38:59.826Z,1543988339.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:38:59.840Z,1543988339.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:38:59.840Z,1543988339.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:39:00.250Z,1543988340.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:39:00.250Z,1543988340.250 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-05T05:39:00.251Z,1543988340.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:39:00.251Z,1543988340.251 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-05T05:39:00.630Z,1543988340.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:39:00.635Z,1543988340.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:39:00.635Z,1543988340.635 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:39:00.635Z,1543988340.635 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:39:00.636Z,1543988340.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:39:00.636Z,1543988340.636 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:41:00.657Z,1543988460.657 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:41:00.657Z,1543988460.657 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-05T05:41:00.657Z,1543988460.657 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:41:00.659Z,1543988460.659 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:41:00.659Z,1543988460.659 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-05T05:41:00.659Z,1543988460.659 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:41:00.672Z,1543988460.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:41:00.673Z,1543988460.673 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:41:01.087Z,1543988461.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:41:01.087Z,1543988461.087 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-05T05:41:01.088Z,1543988461.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:41:01.088Z,1543988461.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-05T05:41:01.459Z,1543988461.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:41:01.459Z,1543988461.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:41:01.460Z,1543988461.460 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:41:01.460Z,1543988461.460 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:41:01.460Z,1543988461.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:41:01.461Z,1543988461.461 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:41:55.907Z,1543988515.907 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T05:36:54.6Z 2018-12-05T05:41:55.907Z,1543988515.907 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T05:41:55.907Z,1543988515.907 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T05:42:00.932Z,1543988520.932 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0564.lzma 2018-12-05T05:42:01.733Z,1543988521.733 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0564.lzma.bak 2018-12-05T05:42:01.734Z,1543988521.734 [DataOverHttps](INFO): SBD MOMSN=8967501 2018-12-05T05:42:11.256Z,1543988531.256 [DataOverHttps](INFO): Sending 308 bytes from file Logs/20181203T211451/Express0565.lzma 2018-12-05T05:42:12.057Z,1543988532.057 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0565.lzma.bak 2018-12-05T05:42:12.057Z,1543988532.057 [DataOverHttps](INFO): SBD MOMSN=8967503 2018-12-05T05:42:13.483Z,1543988533.483 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T05:42:13.483Z,1543988533.483 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T05:42:13.483Z,1543988533.483 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T05:42:52.924Z,1543988572.924 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T05:43:01.749Z,1543988581.749 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:43:01.749Z,1543988581.749 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-05T05:43:01.749Z,1543988581.749 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:43:01.751Z,1543988581.751 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:43:01.752Z,1543988581.752 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-05T05:43:01.752Z,1543988581.752 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:43:01.774Z,1543988581.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:43:01.774Z,1543988581.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:43:02.176Z,1543988582.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:43:02.176Z,1543988582.176 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-05T05:43:02.176Z,1543988582.176 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:43:02.176Z,1543988582.176 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-05T05:43:02.554Z,1543988582.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:43:02.555Z,1543988582.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:43:02.555Z,1543988582.555 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:43:02.555Z,1543988582.555 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:43:02.556Z,1543988582.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:43:02.556Z,1543988582.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:43:23.724Z,1543988603.724 [NAL9602](INFO): Powering down 2018-12-05T05:45:02.726Z,1543988702.726 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:45:02.726Z,1543988702.726 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-05T05:45:02.726Z,1543988702.726 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:45:02.728Z,1543988702.728 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:45:02.728Z,1543988702.728 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-05T05:45:02.728Z,1543988702.728 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:45:02.742Z,1543988702.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:45:02.742Z,1543988702.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:45:03.141Z,1543988703.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:45:03.141Z,1543988703.141 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-05T05:45:03.142Z,1543988703.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:45:03.142Z,1543988703.142 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-05T05:45:03.525Z,1543988703.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:45:03.526Z,1543988703.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:45:03.526Z,1543988703.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:45:03.526Z,1543988703.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:45:03.527Z,1543988703.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:45:03.527Z,1543988703.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:47:03.562Z,1543988823.562 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:47:03.562Z,1543988823.562 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-05T05:47:03.563Z,1543988823.563 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:47:03.565Z,1543988823.565 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:47:03.565Z,1543988823.565 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-05T05:47:03.565Z,1543988823.565 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:47:03.578Z,1543988823.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:47:03.578Z,1543988823.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:47:03.969Z,1543988823.969 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:47:03.969Z,1543988823.969 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-05T05:47:03.970Z,1543988823.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:47:03.970Z,1543988823.970 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-05T05:47:04.357Z,1543988824.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:47:04.358Z,1543988824.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:47:04.358Z,1543988824.358 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:47:04.359Z,1543988824.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:47:04.359Z,1543988824.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:47:04.360Z,1543988824.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:47:13.966Z,1543988833.966 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T05:47:13.966Z,1543988833.966 [Default:CheckIn:C.Wait] Stopped 2018-12-05T05:47:13.966Z,1543988833.966 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T05:47:13.966Z,1543988833.966 [Default:CheckIn:D] Running Loop=1 2018-12-05T05:47:14.366Z,1543988834.366 [Default:CheckIn:D] Stopped 2018-12-05T05:47:14.366Z,1543988834.366 [Default:CheckIn:E] Running Loop=1 2018-12-05T05:47:14.770Z,1543988834.770 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1952.372396 min 2018-12-05T05:47:14.770Z,1543988834.770 [Default:CheckIn:E] Stopped 2018-12-05T05:47:14.770Z,1543988834.770 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T05:47:14.770Z,1543988834.770 [Default:CheckIn] Stopped 2018-12-05T05:47:14.771Z,1543988834.771 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T05:47:14.771Z,1543988834.771 [Default:CheckIn](INFO): Running loop #190 2018-12-05T05:47:14.771Z,1543988834.771 [Default:CheckIn] Running Loop=190 2018-12-05T05:47:14.771Z,1543988834.771 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T05:47:14.771Z,1543988834.771 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T05:47:15.531Z,1543988835.531 [NAL9602](INFO): Powering up 2018-12-05T05:47:26.332Z,1543988846.332 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:48:04.485Z,1543988884.485 [BPC1](ERROR): BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file). 2018-12-05T05:48:30.122Z,1543988910.122 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T05:49:04.564Z,1543988944.564 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:49:04.564Z,1543988944.564 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-05T05:49:04.564Z,1543988944.564 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:49:04.567Z,1543988944.567 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:49:04.567Z,1543988944.567 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-05T05:49:04.567Z,1543988944.567 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:49:04.580Z,1543988944.580 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:49:04.580Z,1543988944.580 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:49:04.987Z,1543988944.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:49:04.987Z,1543988944.987 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-05T05:49:04.988Z,1543988944.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:49:04.988Z,1543988944.988 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-05T05:49:05.370Z,1543988945.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:49:05.370Z,1543988945.370 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:49:05.371Z,1543988945.371 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:49:05.371Z,1543988945.371 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:49:05.372Z,1543988945.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:49:05.372Z,1543988945.372 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:51:05.463Z,1543989065.463 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:51:05.463Z,1543989065.463 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-05T05:51:05.463Z,1543989065.463 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:51:05.465Z,1543989065.465 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:51:05.465Z,1543989065.465 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-05T05:51:05.465Z,1543989065.465 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:51:05.511Z,1543989065.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:51:05.511Z,1543989065.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:51:05.855Z,1543989065.855 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:51:05.855Z,1543989065.855 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-05T05:51:05.855Z,1543989065.855 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:51:05.855Z,1543989065.855 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-05T05:51:06.210Z,1543989066.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:51:06.210Z,1543989066.210 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:51:06.211Z,1543989066.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:51:06.211Z,1543989066.211 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:51:06.212Z,1543989066.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:51:06.212Z,1543989066.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:52:15.779Z,1543989135.779 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T05:47:14.8Z 2018-12-05T05:52:15.779Z,1543989135.779 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T05:52:15.779Z,1543989135.779 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T05:52:20.716Z,1543989140.716 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0567.lzma 2018-12-05T05:52:21.501Z,1543989141.501 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0567.lzma.bak 2018-12-05T05:52:21.501Z,1543989141.501 [DataOverHttps](INFO): SBD MOMSN=8967525 2018-12-05T05:52:30.982Z,1543989150.982 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T05:52:31.070Z,1543989151.070 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0568.lzma 2018-12-05T05:52:31.857Z,1543989151.857 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0568.lzma.bak 2018-12-05T05:52:31.857Z,1543989151.857 [DataOverHttps](INFO): SBD MOMSN=8967527 2018-12-05T05:52:33.185Z,1543989153.185 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T05:52:33.185Z,1543989153.185 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T05:52:33.185Z,1543989153.185 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T05:53:01.187Z,1543989181.187 [NAL9602](INFO): Powering down 2018-12-05T05:53:06.404Z,1543989186.404 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:53:06.404Z,1543989186.404 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-05T05:53:06.404Z,1543989186.404 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:53:06.418Z,1543989186.418 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:53:06.418Z,1543989186.418 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-05T05:53:06.418Z,1543989186.418 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:53:06.432Z,1543989186.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:53:06.432Z,1543989186.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:53:06.836Z,1543989186.836 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:53:06.836Z,1543989186.836 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-05T05:53:06.837Z,1543989186.837 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:53:06.837Z,1543989186.837 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-05T05:53:07.221Z,1543989187.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:53:07.221Z,1543989187.221 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:53:07.222Z,1543989187.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:53:07.222Z,1543989187.222 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:53:07.223Z,1543989187.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:53:07.223Z,1543989187.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:55:07.354Z,1543989307.354 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:55:07.354Z,1543989307.354 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-05T05:55:07.354Z,1543989307.354 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:55:07.356Z,1543989307.356 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:55:07.357Z,1543989307.357 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-05T05:55:07.357Z,1543989307.357 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:55:07.376Z,1543989307.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:55:07.377Z,1543989307.377 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:55:07.767Z,1543989307.767 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:55:07.767Z,1543989307.767 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-05T05:55:07.768Z,1543989307.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:55:07.768Z,1543989307.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-05T05:55:08.135Z,1543989308.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:55:08.136Z,1543989308.136 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:55:08.136Z,1543989308.136 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:55:08.137Z,1543989308.137 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:55:08.137Z,1543989308.137 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:55:08.137Z,1543989308.137 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:57:08.170Z,1543989428.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:57:08.170Z,1543989428.170 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-05T05:57:08.170Z,1543989428.170 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:57:08.172Z,1543989428.172 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:57:08.172Z,1543989428.172 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-05T05:57:08.172Z,1543989428.172 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:57:08.217Z,1543989428.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:57:08.217Z,1543989428.217 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:57:08.608Z,1543989428.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:57:08.609Z,1543989428.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-05T05:57:08.609Z,1543989428.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:57:08.609Z,1543989428.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-05T05:57:08.976Z,1543989428.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:57:08.977Z,1543989428.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:57:08.977Z,1543989428.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:57:08.977Z,1543989428.977 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:57:08.978Z,1543989428.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:57:08.978Z,1543989428.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:57:33.358Z,1543989453.358 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T05:57:33.358Z,1543989453.358 [Default:CheckIn:C.Wait] Stopped 2018-12-05T05:57:33.358Z,1543989453.358 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T05:57:33.358Z,1543989453.358 [Default:CheckIn:D] Running Loop=1 2018-12-05T05:57:33.758Z,1543989453.758 [Default:CheckIn:D] Stopped 2018-12-05T05:57:33.758Z,1543989453.758 [Default:CheckIn:E] Running Loop=1 2018-12-05T05:57:34.181Z,1543989454.181 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1962.695573 min 2018-12-05T05:57:34.181Z,1543989454.181 [Default:CheckIn:E] Stopped 2018-12-05T05:57:34.181Z,1543989454.181 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T05:57:34.181Z,1543989454.181 [Default:CheckIn] Stopped 2018-12-05T05:57:34.182Z,1543989454.182 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T05:57:34.182Z,1543989454.182 [Default:CheckIn](INFO): Running loop #191 2018-12-05T05:57:34.182Z,1543989454.182 [Default:CheckIn] Running Loop=191 2018-12-05T05:57:34.182Z,1543989454.182 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T05:57:34.182Z,1543989454.182 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T05:57:34.932Z,1543989454.932 [NAL9602](INFO): Powering up 2018-12-05T05:57:46.136Z,1543989466.136 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:57:46.933Z,1543989466.933 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T05:57:46.933Z,1543989466.933 [NAL9602] Data Fault, FailCount= 4 2018-12-05T05:57:46.933Z,1543989466.933 [NAL9602](ERROR): Data Fault 2018-12-05T05:57:47.002Z,1543989467.002 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T05:57:47.336Z,1543989467.336 [NAL9602](INFO): Powering down 2018-12-05T05:57:48.207Z,1543989468.207 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T05:57:48.207Z,1543989468.207 [NAL9602] No Fault, FailCount= 4 2018-12-05T05:58:17.432Z,1543989497.432 [NAL9602](INFO): Powering up NAL9602 2018-12-05T05:58:29.404Z,1543989509.404 [NAL9602](INFO): NAL9602 initialized 2018-12-05T05:59:09.042Z,1543989549.042 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:59:09.042Z,1543989549.042 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-05T05:59:09.042Z,1543989549.042 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T05:59:09.044Z,1543989549.044 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T05:59:09.044Z,1543989549.044 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-05T05:59:09.044Z,1543989549.044 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T05:59:09.066Z,1543989549.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T05:59:09.071Z,1543989549.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T05:59:09.419Z,1543989549.419 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T05:59:09.419Z,1543989549.419 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-05T05:59:09.420Z,1543989549.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T05:59:09.420Z,1543989549.420 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-05T05:59:09.814Z,1543989549.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T05:59:09.815Z,1543989549.815 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:59:09.815Z,1543989549.815 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T05:59:09.815Z,1543989549.815 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T05:59:09.816Z,1543989549.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T05:59:09.816Z,1543989549.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:01:09.866Z,1543989669.866 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:01:09.866Z,1543989669.866 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-05T06:01:09.866Z,1543989669.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:01:09.868Z,1543989669.868 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:01:09.869Z,1543989669.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-05T06:01:09.869Z,1543989669.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:01:09.912Z,1543989669.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:01:09.912Z,1543989669.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:01:10.290Z,1543989670.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:01:10.290Z,1543989670.290 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-05T06:01:10.291Z,1543989670.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:01:10.291Z,1543989670.291 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-05T06:01:10.674Z,1543989670.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:01:10.674Z,1543989670.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:01:10.675Z,1543989670.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:01:10.675Z,1543989670.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:01:10.676Z,1543989670.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:01:10.676Z,1543989670.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:02:35.516Z,1543989755.516 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T05:57:34.2Z 2018-12-05T06:02:35.516Z,1543989755.516 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T06:02:35.516Z,1543989755.516 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T06:02:40.464Z,1543989760.464 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0570.lzma 2018-12-05T06:02:41.265Z,1543989761.265 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0570.lzma.bak 2018-12-05T06:02:41.265Z,1543989761.265 [DataOverHttps](INFO): SBD MOMSN=8967550 2018-12-05T06:02:50.712Z,1543989770.712 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0571.lzma 2018-12-05T06:02:51.491Z,1543989771.491 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0571.lzma.bak 2018-12-05T06:02:51.492Z,1543989771.492 [DataOverHttps](INFO): SBD MOMSN=8967552 2018-12-05T06:02:52.846Z,1543989772.846 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T06:02:52.846Z,1543989772.846 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T06:02:52.846Z,1543989772.846 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T06:03:10.858Z,1543989790.858 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:03:10.858Z,1543989790.858 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-05T06:03:10.858Z,1543989790.858 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:03:10.860Z,1543989790.860 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:03:10.860Z,1543989790.860 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-05T06:03:10.861Z,1543989790.861 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:03:10.874Z,1543989790.874 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:03:10.874Z,1543989790.874 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:03:11.270Z,1543989791.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:03:11.270Z,1543989791.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-05T06:03:11.270Z,1543989791.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:03:11.270Z,1543989791.270 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-05T06:03:11.651Z,1543989791.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:03:11.652Z,1543989791.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:03:11.652Z,1543989791.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:03:11.652Z,1543989791.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:03:11.653Z,1543989791.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:03:11.653Z,1543989791.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:03:32.996Z,1543989812.996 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T06:04:03.375Z,1543989843.375 [NAL9602](INFO): Powering down 2018-12-05T06:05:11.809Z,1543989911.809 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:05:11.809Z,1543989911.809 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-05T06:05:11.809Z,1543989911.809 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:05:11.812Z,1543989911.812 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:05:11.812Z,1543989911.812 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-05T06:05:11.812Z,1543989911.812 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:05:11.825Z,1543989911.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:05:11.825Z,1543989911.825 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:05:12.215Z,1543989912.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:05:12.215Z,1543989912.215 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-05T06:05:12.216Z,1543989912.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:05:12.216Z,1543989912.216 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-05T06:05:12.626Z,1543989912.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:05:12.626Z,1543989912.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:05:12.627Z,1543989912.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:05:12.627Z,1543989912.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:05:12.628Z,1543989912.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:05:12.628Z,1543989912.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:07:06.209Z,1543990026.209 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T06:07:06.209Z,1543990026.209 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T06:07:06.209Z,1543990026.209 [DropWeight](ERROR): Hardware Fault 2018-12-05T06:07:06.271Z,1543990026.271 [CBIT](INFO): Critical error at 20181205T060706 2018-12-05T06:07:06.274Z,1543990026.274 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T06:07:06.274Z,1543990026.274 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T06:07:06.653Z,1543990026.653 [CBIT](INFO): Critical error at 20181205T060706 2018-12-05T06:07:12.641Z,1543990032.641 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:07:12.641Z,1543990032.641 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-05T06:07:12.641Z,1543990032.641 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:07:12.643Z,1543990032.643 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:07:12.643Z,1543990032.643 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-05T06:07:12.643Z,1543990032.643 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:07:12.657Z,1543990032.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:07:12.657Z,1543990032.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:07:13.054Z,1543990033.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:07:13.054Z,1543990033.054 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-05T06:07:13.055Z,1543990033.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:07:13.055Z,1543990033.055 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-05T06:07:13.434Z,1543990033.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:07:13.434Z,1543990033.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:07:13.435Z,1543990033.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:07:13.435Z,1543990033.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:07:13.435Z,1543990033.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:07:13.436Z,1543990033.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:07:53.136Z,1543990073.136 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T06:07:53.136Z,1543990073.136 [Default:CheckIn:C.Wait] Stopped 2018-12-05T06:07:53.137Z,1543990073.137 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T06:07:53.137Z,1543990073.137 [Default:CheckIn:D] Running Loop=1 2018-12-05T06:07:53.546Z,1543990073.546 [Default:CheckIn:D] Stopped 2018-12-05T06:07:53.546Z,1543990073.546 [Default:CheckIn:E] Running Loop=1 2018-12-05T06:07:53.938Z,1543990073.938 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1973.025391 min 2018-12-05T06:07:53.939Z,1543990073.939 [Default:CheckIn:E] Stopped 2018-12-05T06:07:53.939Z,1543990073.939 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T06:07:53.939Z,1543990073.939 [Default:CheckIn] Stopped 2018-12-05T06:07:53.939Z,1543990073.939 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T06:07:53.939Z,1543990073.939 [Default:CheckIn](INFO): Running loop #192 2018-12-05T06:07:53.939Z,1543990073.939 [Default:CheckIn] Running Loop=192 2018-12-05T06:07:53.939Z,1543990073.939 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T06:07:53.939Z,1543990073.939 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T06:07:54.711Z,1543990074.711 [NAL9602](INFO): Powering up 2018-12-05T06:08:05.511Z,1543990085.511 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:08:37.467Z,1543990117.467 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T06:08:37.542Z,1543990117.542 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T06:08:37.542Z,1543990117.542 [NAL9602] Data Fault, FailCount= 5 2018-12-05T06:08:37.542Z,1543990117.542 [NAL9602](ERROR): Data Fault 2018-12-05T06:08:37.594Z,1543990117.594 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T06:08:37.599Z,1543990117.599 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T06:08:37.867Z,1543990117.867 [NAL9602](INFO): Powering down 2018-12-05T06:08:37.938Z,1543990117.938 [CBIT](INFO): Critical error at 20181205T060837 2018-12-05T06:09:13.838Z,1543990153.838 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:09:13.839Z,1543990153.839 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-05T06:09:13.839Z,1543990153.839 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:09:13.841Z,1543990153.841 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:09:13.841Z,1543990153.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-05T06:09:13.841Z,1543990153.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:09:13.856Z,1543990153.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:09:13.857Z,1543990153.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:09:14.245Z,1543990154.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:09:14.246Z,1543990154.246 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-05T06:09:14.246Z,1543990154.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:09:14.246Z,1543990154.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-05T06:09:14.632Z,1543990154.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:09:14.632Z,1543990154.632 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:09:14.633Z,1543990154.633 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:09:14.633Z,1543990154.633 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:09:14.633Z,1543990154.633 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:09:14.634Z,1543990154.634 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:10:37.916Z,1543990237.916 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T06:10:37.916Z,1543990237.916 [NAL9602] No Fault, FailCount= 5 2018-12-05T06:10:38.273Z,1543990238.273 [NAL9602](INFO): Powering up NAL9602 2018-12-05T06:10:49.083Z,1543990249.083 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:10:49.876Z,1543990249.876 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T06:10:49.876Z,1543990249.876 [NAL9602] Data Fault, FailCount= 1 2018-12-05T06:10:49.876Z,1543990249.876 [NAL9602](ERROR): Data Fault 2018-12-05T06:10:49.940Z,1543990249.940 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T06:10:50.275Z,1543990250.275 [NAL9602](INFO): Powering down 2018-12-05T06:10:51.118Z,1543990251.118 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T06:10:51.118Z,1543990251.118 [NAL9602] No Fault, FailCount= 1 2018-12-05T06:11:14.715Z,1543990274.715 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:11:14.715Z,1543990274.715 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-05T06:11:14.715Z,1543990274.715 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:11:14.717Z,1543990274.717 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:11:14.717Z,1543990274.717 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-05T06:11:14.717Z,1543990274.717 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:11:14.730Z,1543990274.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:11:14.731Z,1543990274.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:11:15.141Z,1543990275.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:11:15.142Z,1543990275.142 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-05T06:11:15.142Z,1543990275.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:11:15.143Z,1543990275.143 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-05T06:11:15.520Z,1543990275.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:11:15.520Z,1543990275.520 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:11:15.521Z,1543990275.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:11:15.521Z,1543990275.521 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:11:15.521Z,1543990275.521 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:11:15.522Z,1543990275.522 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:11:20.291Z,1543990280.291 [NAL9602](INFO): Powering up NAL9602 2018-12-05T06:11:31.492Z,1543990291.492 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:12:54.936Z,1543990374.936 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T06:07:53.9Z 2018-12-05T06:12:54.936Z,1543990374.936 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T06:12:54.936Z,1543990374.936 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T06:12:59.982Z,1543990379.982 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181203T211451/Courier0573.lzma 2018-12-05T06:13:00.781Z,1543990380.781 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0573.lzma.bak 2018-12-05T06:13:00.781Z,1543990380.781 [DataOverHttps](INFO): SBD MOMSN=8967574 2018-12-05T06:13:10.032Z,1543990390.032 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T06:13:10.102Z,1543990390.102 [DataOverHttps](INFO): Sending 349 bytes from file Logs/20181203T211451/Express0574.lzma 2018-12-05T06:13:10.877Z,1543990390.877 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0574.lzma.bak 2018-12-05T06:13:10.878Z,1543990390.878 [DataOverHttps](INFO): SBD MOMSN=8967579 2018-12-05T06:13:12.365Z,1543990392.365 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T06:13:12.365Z,1543990392.365 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T06:13:12.365Z,1543990392.365 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T06:13:15.608Z,1543990395.608 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:13:15.609Z,1543990395.609 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-05T06:13:15.609Z,1543990395.609 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:13:15.611Z,1543990395.611 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:13:15.611Z,1543990395.611 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-05T06:13:15.611Z,1543990395.611 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:13:15.624Z,1543990395.624 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:13:15.624Z,1543990395.624 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:13:15.750Z,1543990395.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:13:15.750Z,1543990395.750 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-05T06:13:15.751Z,1543990395.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:13:15.751Z,1543990395.751 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-05T06:13:16.062Z,1543990396.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:13:16.063Z,1543990396.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:13:16.063Z,1543990396.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:13:16.063Z,1543990396.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:13:16.064Z,1543990396.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:13:16.064Z,1543990396.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:13:40.439Z,1543990420.439 [NAL9602](INFO): Powering down 2018-12-05T06:15:16.395Z,1543990516.395 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:15:16.395Z,1543990516.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-05T06:15:16.395Z,1543990516.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:15:16.397Z,1543990516.397 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:15:16.397Z,1543990516.397 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-05T06:15:16.397Z,1543990516.397 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:15:16.431Z,1543990516.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:15:16.431Z,1543990516.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:15:16.810Z,1543990516.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:15:16.810Z,1543990516.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-05T06:15:16.811Z,1543990516.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:15:16.811Z,1543990516.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-05T06:15:17.188Z,1543990517.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:15:17.188Z,1543990517.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:15:17.189Z,1543990517.189 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:15:17.189Z,1543990517.189 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:15:17.189Z,1543990517.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:15:17.190Z,1543990517.190 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:17:17.326Z,1543990637.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:17:17.326Z,1543990637.326 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-05T06:17:17.326Z,1543990637.326 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:17:17.328Z,1543990637.328 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:17:17.328Z,1543990637.328 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-05T06:17:17.328Z,1543990637.328 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:17:17.424Z,1543990637.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:17:17.424Z,1543990637.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:17:17.771Z,1543990637.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:17:17.771Z,1543990637.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-05T06:17:17.771Z,1543990637.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:17:17.771Z,1543990637.771 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-05T06:17:18.129Z,1543990638.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:17:18.129Z,1543990638.129 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:17:18.129Z,1543990638.129 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:17:18.130Z,1543990638.130 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:17:18.130Z,1543990638.130 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:17:18.131Z,1543990638.131 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:18:12.529Z,1543990692.529 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T06:18:12.530Z,1543990692.530 [Default:CheckIn:C.Wait] Stopped 2018-12-05T06:18:12.530Z,1543990692.530 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T06:18:12.530Z,1543990692.530 [Default:CheckIn:D] Running Loop=1 2018-12-05T06:18:12.930Z,1543990692.930 [Default:CheckIn:D] Stopped 2018-12-05T06:18:12.930Z,1543990692.930 [Default:CheckIn:E] Running Loop=1 2018-12-05T06:18:13.326Z,1543990693.326 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1983.348438 min 2018-12-05T06:18:13.326Z,1543990693.326 [Default:CheckIn:E] Stopped 2018-12-05T06:18:13.326Z,1543990693.326 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T06:18:13.327Z,1543990693.327 [Default:CheckIn] Stopped 2018-12-05T06:18:13.327Z,1543990693.327 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T06:18:13.327Z,1543990693.327 [Default:CheckIn](INFO): Running loop #193 2018-12-05T06:18:13.327Z,1543990693.327 [Default:CheckIn] Running Loop=193 2018-12-05T06:18:13.327Z,1543990693.327 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T06:18:13.327Z,1543990693.327 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T06:18:14.099Z,1543990694.099 [NAL9602](INFO): Powering up 2018-12-05T06:18:25.303Z,1543990705.303 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:18:57.251Z,1543990737.251 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T06:18:57.326Z,1543990737.326 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T06:18:57.326Z,1543990737.326 [NAL9602] Data Fault, FailCount= 2 2018-12-05T06:18:57.326Z,1543990737.326 [NAL9602](ERROR): Data Fault 2018-12-05T06:18:57.401Z,1543990737.401 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T06:18:57.651Z,1543990737.651 [NAL9602](INFO): Powering down 2018-12-05T06:18:58.517Z,1543990738.517 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T06:18:58.517Z,1543990738.517 [NAL9602] No Fault, FailCount= 2 2018-12-05T06:19:18.452Z,1543990758.452 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:19:18.453Z,1543990758.453 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-05T06:19:18.453Z,1543990758.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:19:18.455Z,1543990758.455 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:19:18.455Z,1543990758.455 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-05T06:19:18.455Z,1543990758.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:19:18.469Z,1543990758.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:19:18.469Z,1543990758.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:19:18.876Z,1543990758.876 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:19:18.876Z,1543990758.876 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-05T06:19:18.876Z,1543990758.876 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:19:18.876Z,1543990758.876 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-05T06:19:19.262Z,1543990759.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:19:19.262Z,1543990759.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:19:19.263Z,1543990759.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:19:19.263Z,1543990759.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:19:19.263Z,1543990759.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:19:19.264Z,1543990759.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:19:28.031Z,1543990768.031 [NAL9602](INFO): Powering up NAL9602 2018-12-05T06:19:39.231Z,1543990779.231 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:21:19.398Z,1543990879.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:21:19.398Z,1543990879.398 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-05T06:21:19.398Z,1543990879.398 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:21:19.400Z,1543990879.400 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:21:19.401Z,1543990879.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-05T06:21:19.401Z,1543990879.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:21:19.414Z,1543990879.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:21:19.414Z,1543990879.414 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:21:19.807Z,1543990879.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:21:19.807Z,1543990879.807 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-05T06:21:19.807Z,1543990879.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:21:19.807Z,1543990879.807 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-05T06:21:20.202Z,1543990880.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:21:20.203Z,1543990880.203 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:21:20.203Z,1543990880.203 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:21:20.203Z,1543990880.203 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:21:20.204Z,1543990880.204 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:21:20.204Z,1543990880.204 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:22:06.540Z,1543990926.540 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T06:22:06.540Z,1543990926.540 [DropWeight] No Fault, FailCount= 1 2018-12-05T06:23:14.677Z,1543990994.677 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T06:18:13.3Z 2018-12-05T06:23:14.677Z,1543990994.677 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T06:23:14.677Z,1543990994.677 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T06:23:19.613Z,1543990999.613 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0576.lzma 2018-12-05T06:23:20.405Z,1543991000.405 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0576.lzma.bak 2018-12-05T06:23:20.406Z,1543991000.406 [DataOverHttps](INFO): SBD MOMSN=8967602 2018-12-05T06:23:20.450Z,1543991000.450 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:23:20.451Z,1543991000.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-05T06:23:20.451Z,1543991000.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:23:20.453Z,1543991000.453 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:23:20.453Z,1543991000.453 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-05T06:23:20.453Z,1543991000.453 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:23:20.478Z,1543991000.478 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:23:20.479Z,1543991000.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:23:21.783Z,1543991001.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:23:21.783Z,1543991001.783 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-05T06:23:21.784Z,1543991001.784 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:23:21.784Z,1543991001.784 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-05T06:23:21.882Z,1543991001.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:23:21.883Z,1543991001.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:23:21.883Z,1543991001.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:23:21.883Z,1543991001.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:23:21.884Z,1543991001.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:23:21.884Z,1543991001.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:23:29.710Z,1543991009.710 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T06:23:29.768Z,1543991009.768 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0577.lzma 2018-12-05T06:23:30.565Z,1543991010.565 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0577.lzma.bak 2018-12-05T06:23:30.566Z,1543991010.566 [DataOverHttps](INFO): SBD MOMSN=8967604 2018-12-05T06:23:32.048Z,1543991012.048 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T06:23:32.048Z,1543991012.048 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T06:23:32.048Z,1543991012.048 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T06:24:00.023Z,1543991040.023 [NAL9602](INFO): Powering down 2018-12-05T06:25:22.086Z,1543991122.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:25:22.086Z,1543991122.086 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-05T06:25:22.087Z,1543991122.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:25:22.089Z,1543991122.089 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:25:22.089Z,1543991122.089 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-05T06:25:22.089Z,1543991122.089 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:25:22.102Z,1543991122.102 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:25:22.102Z,1543991122.102 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:25:22.495Z,1543991122.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:25:22.495Z,1543991122.495 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-05T06:25:22.496Z,1543991122.496 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:25:22.496Z,1543991122.496 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-05T06:25:22.886Z,1543991122.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:25:22.886Z,1543991122.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:25:22.887Z,1543991122.887 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:25:22.887Z,1543991122.887 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:25:22.887Z,1543991122.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:25:22.888Z,1543991122.888 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:27:22.910Z,1543991242.910 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:27:22.910Z,1543991242.910 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-05T06:27:22.910Z,1543991242.910 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:27:22.912Z,1543991242.912 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:27:22.912Z,1543991242.912 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-05T06:27:22.912Z,1543991242.912 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:27:22.925Z,1543991242.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:27:22.926Z,1543991242.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:27:23.327Z,1543991243.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:27:23.327Z,1543991243.327 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-05T06:27:23.327Z,1543991243.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:27:23.327Z,1543991243.327 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-05T06:27:23.694Z,1543991243.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:27:23.695Z,1543991243.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:27:23.695Z,1543991243.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:27:23.695Z,1543991243.695 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:27:23.696Z,1543991243.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:27:23.696Z,1543991243.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:28:32.246Z,1543991312.246 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T06:28:32.246Z,1543991312.246 [Default:CheckIn:C.Wait] Stopped 2018-12-05T06:28:32.246Z,1543991312.246 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T06:28:32.246Z,1543991312.246 [Default:CheckIn:D] Running Loop=1 2018-12-05T06:28:32.646Z,1543991312.646 [Default:CheckIn:D] Stopped 2018-12-05T06:28:32.646Z,1543991312.646 [Default:CheckIn:E] Running Loop=1 2018-12-05T06:28:33.046Z,1543991313.046 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1993.677083 min 2018-12-05T06:28:33.047Z,1543991313.047 [Default:CheckIn:E] Stopped 2018-12-05T06:28:33.047Z,1543991313.047 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T06:28:33.047Z,1543991313.047 [Default:CheckIn] Stopped 2018-12-05T06:28:33.047Z,1543991313.047 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T06:28:33.047Z,1543991313.047 [Default:CheckIn](INFO): Running loop #194 2018-12-05T06:28:33.047Z,1543991313.047 [Default:CheckIn] Running Loop=194 2018-12-05T06:28:33.047Z,1543991313.047 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T06:28:33.048Z,1543991313.048 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T06:28:33.816Z,1543991313.816 [NAL9602](INFO): Powering up 2018-12-05T06:28:45.016Z,1543991325.016 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:28:45.814Z,1543991325.814 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T06:28:45.814Z,1543991325.814 [NAL9602] Data Fault, FailCount= 3 2018-12-05T06:28:45.814Z,1543991325.814 [NAL9602](ERROR): Data Fault 2018-12-05T06:28:45.869Z,1543991325.869 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T06:28:46.216Z,1543991326.216 [NAL9602](INFO): Powering down 2018-12-05T06:28:47.056Z,1543991327.056 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T06:28:47.056Z,1543991327.056 [NAL9602] No Fault, FailCount= 3 2018-12-05T06:29:16.268Z,1543991356.268 [NAL9602](INFO): Powering up NAL9602 2018-12-05T06:29:23.893Z,1543991363.893 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:29:23.893Z,1543991363.893 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-05T06:29:23.893Z,1543991363.893 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:29:23.895Z,1543991363.895 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:29:23.895Z,1543991363.895 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-05T06:29:23.895Z,1543991363.895 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:29:23.908Z,1543991363.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:29:23.909Z,1543991363.909 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:29:24.303Z,1543991364.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:29:24.303Z,1543991364.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-05T06:29:24.304Z,1543991364.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:29:24.304Z,1543991364.304 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-05T06:29:24.694Z,1543991364.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:29:24.695Z,1543991364.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:29:24.695Z,1543991364.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:29:24.695Z,1543991364.695 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:29:24.696Z,1543991364.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:29:24.696Z,1543991364.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:29:28.420Z,1543991368.420 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:31:24.906Z,1543991484.906 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:31:24.906Z,1543991484.906 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-05T06:31:24.906Z,1543991484.906 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:31:24.908Z,1543991484.908 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:31:24.908Z,1543991484.908 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-05T06:31:24.908Z,1543991484.908 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:31:24.921Z,1543991484.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:31:24.921Z,1543991484.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:31:25.318Z,1543991485.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:31:25.318Z,1543991485.318 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-05T06:31:25.319Z,1543991485.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:31:25.319Z,1543991485.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-05T06:31:25.706Z,1543991485.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:31:25.706Z,1543991485.706 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:31:25.707Z,1543991485.707 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:31:25.707Z,1543991485.707 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:31:25.707Z,1543991485.707 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:31:25.708Z,1543991485.708 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:33:25.734Z,1543991605.734 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:33:25.735Z,1543991605.735 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-05T06:33:25.735Z,1543991605.735 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:33:25.737Z,1543991605.737 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:33:25.737Z,1543991605.737 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-05T06:33:25.737Z,1543991605.737 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:33:25.799Z,1543991605.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:33:25.799Z,1543991605.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:33:26.150Z,1543991606.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:33:26.150Z,1543991606.150 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-05T06:33:26.151Z,1543991606.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:33:26.151Z,1543991606.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-05T06:33:26.511Z,1543991606.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:33:26.512Z,1543991606.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:33:26.512Z,1543991606.512 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:33:26.513Z,1543991606.513 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:33:26.513Z,1543991606.513 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:33:26.513Z,1543991606.513 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:33:34.412Z,1543991614.412 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T06:28:33.0Z 2018-12-05T06:33:34.412Z,1543991614.412 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T06:33:34.412Z,1543991614.412 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T06:33:39.515Z,1543991619.515 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0579.lzma 2018-12-05T06:33:40.297Z,1543991620.297 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0579.lzma.bak 2018-12-05T06:33:40.297Z,1543991620.297 [DataOverHttps](INFO): SBD MOMSN=8967627 2018-12-05T06:33:49.836Z,1543991629.836 [DataOverHttps](INFO): Sending 319 bytes from file Logs/20181203T211451/Express0580.lzma 2018-12-05T06:33:50.613Z,1543991630.613 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0580.lzma.bak 2018-12-05T06:33:50.613Z,1543991630.613 [DataOverHttps](INFO): SBD MOMSN=8967629 2018-12-05T06:33:51.982Z,1543991631.982 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T06:33:51.982Z,1543991631.982 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T06:33:51.982Z,1543991631.982 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T06:34:31.719Z,1543991671.719 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T06:35:02.516Z,1543991702.516 [NAL9602](INFO): Powering down 2018-12-05T06:35:26.674Z,1543991726.674 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:35:26.675Z,1543991726.675 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-05T06:35:26.675Z,1543991726.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:35:26.677Z,1543991726.677 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:35:26.677Z,1543991726.677 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-05T06:35:26.677Z,1543991726.677 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:35:26.711Z,1543991726.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:35:26.711Z,1543991726.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:35:27.090Z,1543991727.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:35:27.090Z,1543991727.090 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-05T06:35:27.090Z,1543991727.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:35:27.090Z,1543991727.090 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-05T06:35:27.474Z,1543991727.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:35:27.474Z,1543991727.474 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:35:27.475Z,1543991727.475 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:35:27.475Z,1543991727.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:35:27.475Z,1543991727.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:35:27.476Z,1543991727.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:37:27.518Z,1543991847.518 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:37:27.518Z,1543991847.518 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-05T06:37:27.518Z,1543991847.518 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:37:27.520Z,1543991847.520 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:37:27.520Z,1543991847.520 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-05T06:37:27.520Z,1543991847.520 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:37:27.533Z,1543991847.533 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:37:27.534Z,1543991847.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:37:27.941Z,1543991847.941 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:37:27.941Z,1543991847.941 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-05T06:37:27.942Z,1543991847.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:37:27.942Z,1543991847.942 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-05T06:37:28.318Z,1543991848.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:37:28.318Z,1543991848.318 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:37:28.319Z,1543991848.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:37:28.319Z,1543991848.319 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:37:28.320Z,1543991848.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:37:28.320Z,1543991848.320 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:38:52.365Z,1543991932.365 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T06:38:52.365Z,1543991932.365 [Default:CheckIn:C.Wait] Stopped 2018-12-05T06:38:52.365Z,1543991932.365 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T06:38:52.366Z,1543991932.366 [Default:CheckIn:D] Running Loop=1 2018-12-05T06:38:52.766Z,1543991932.766 [Default:CheckIn:D] Stopped 2018-12-05T06:38:52.766Z,1543991932.766 [Default:CheckIn:E] Running Loop=1 2018-12-05T06:38:53.170Z,1543991933.170 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2004.012370 min 2018-12-05T06:38:53.171Z,1543991933.171 [Default:CheckIn:E] Stopped 2018-12-05T06:38:53.171Z,1543991933.171 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T06:38:53.171Z,1543991933.171 [Default:CheckIn] Stopped 2018-12-05T06:38:53.171Z,1543991933.171 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T06:38:53.171Z,1543991933.171 [Default:CheckIn](INFO): Running loop #195 2018-12-05T06:38:53.171Z,1543991933.171 [Default:CheckIn] Running Loop=195 2018-12-05T06:38:53.171Z,1543991933.171 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T06:38:53.172Z,1543991933.172 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T06:38:53.943Z,1543991933.943 [NAL9602](INFO): Powering up 2018-12-05T06:39:05.148Z,1543991945.148 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:39:28.342Z,1543991968.342 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:39:28.342Z,1543991968.342 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-05T06:39:28.343Z,1543991968.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:39:28.345Z,1543991968.345 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:39:28.345Z,1543991968.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-05T06:39:28.345Z,1543991968.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:39:28.407Z,1543991968.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:39:28.407Z,1543991968.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:39:28.779Z,1543991968.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:39:28.779Z,1543991968.779 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-05T06:39:28.779Z,1543991968.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:39:28.779Z,1543991968.779 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-05T06:39:29.145Z,1543991969.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:39:29.146Z,1543991969.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:39:29.146Z,1543991969.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:39:29.147Z,1543991969.147 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:39:29.147Z,1543991969.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:39:29.148Z,1543991969.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:41:29.213Z,1543992089.213 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:41:29.213Z,1543992089.213 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-05T06:41:29.213Z,1543992089.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:41:29.232Z,1543992089.232 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:41:29.232Z,1543992089.232 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-05T06:41:29.232Z,1543992089.232 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:41:29.250Z,1543992089.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:41:29.250Z,1543992089.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:41:29.647Z,1543992089.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:41:29.647Z,1543992089.647 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-05T06:41:29.648Z,1543992089.648 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:41:29.648Z,1543992089.648 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-05T06:41:30.014Z,1543992090.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:41:30.015Z,1543992090.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:41:30.016Z,1543992090.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:41:30.016Z,1543992090.016 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:41:30.016Z,1543992090.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:41:30.017Z,1543992090.017 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:43:30.086Z,1543992210.086 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:43:30.087Z,1543992210.087 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-05T06:43:30.087Z,1543992210.087 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:43:30.089Z,1543992210.089 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:43:30.089Z,1543992210.089 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-05T06:43:30.089Z,1543992210.089 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:43:30.147Z,1543992210.147 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:43:30.148Z,1543992210.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:43:30.494Z,1543992210.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:43:30.494Z,1543992210.494 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-05T06:43:30.495Z,1543992210.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:43:30.495Z,1543992210.495 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-05T06:43:30.882Z,1543992210.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:43:30.882Z,1543992210.882 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:43:30.883Z,1543992210.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:43:30.883Z,1543992210.883 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:43:30.883Z,1543992210.883 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:43:30.884Z,1543992210.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:43:54.412Z,1543992234.412 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T06:38:53.2Z 2018-12-05T06:43:54.413Z,1543992234.413 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T06:43:54.413Z,1543992234.413 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T06:43:59.353Z,1543992239.353 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0582.lzma 2018-12-05T06:44:00.145Z,1543992240.145 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0582.lzma.bak 2018-12-05T06:44:00.145Z,1543992240.145 [DataOverHttps](INFO): SBD MOMSN=8967655 2018-12-05T06:44:09.596Z,1543992249.596 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T06:44:09.667Z,1543992249.667 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0583.lzma 2018-12-05T06:44:10.441Z,1543992250.441 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0583.lzma.bak 2018-12-05T06:44:10.441Z,1543992250.441 [DataOverHttps](INFO): SBD MOMSN=8967657 2018-12-05T06:44:11.840Z,1543992251.840 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T06:44:11.841Z,1543992251.841 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T06:44:11.841Z,1543992251.841 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T06:44:39.847Z,1543992279.847 [NAL9602](INFO): Powering down 2018-12-05T06:45:31.006Z,1543992331.006 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:45:31.006Z,1543992331.006 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-05T06:45:31.006Z,1543992331.006 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:45:31.008Z,1543992331.008 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:45:31.008Z,1543992331.008 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-05T06:45:31.009Z,1543992331.009 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:45:31.022Z,1543992331.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:45:31.022Z,1543992331.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:45:31.442Z,1543992331.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:45:31.442Z,1543992331.442 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-05T06:45:31.442Z,1543992331.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:45:31.442Z,1543992331.442 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-05T06:45:31.796Z,1543992331.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:45:31.796Z,1543992331.796 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:45:31.797Z,1543992331.797 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:45:31.797Z,1543992331.797 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:45:31.798Z,1543992331.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:45:31.798Z,1543992331.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:47:31.990Z,1543992451.990 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:47:31.990Z,1543992451.990 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-05T06:47:31.991Z,1543992451.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:47:31.993Z,1543992451.993 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:47:31.993Z,1543992451.993 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-05T06:47:31.993Z,1543992451.993 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:47:32.007Z,1543992452.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:47:32.008Z,1543992452.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:47:32.395Z,1543992452.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:47:32.395Z,1543992452.395 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-05T06:47:32.396Z,1543992452.396 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:47:32.396Z,1543992452.396 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-05T06:47:32.783Z,1543992452.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:47:32.784Z,1543992452.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:47:32.784Z,1543992452.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:47:32.784Z,1543992452.784 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:47:32.785Z,1543992452.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:47:32.785Z,1543992452.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:49:11.972Z,1543992551.972 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T06:49:11.973Z,1543992551.973 [Default:CheckIn:C.Wait] Stopped 2018-12-05T06:49:11.973Z,1543992551.973 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T06:49:11.973Z,1543992551.973 [Default:CheckIn:D] Running Loop=1 2018-12-05T06:49:12.373Z,1543992552.373 [Default:CheckIn:D] Stopped 2018-12-05T06:49:12.373Z,1543992552.373 [Default:CheckIn:E] Running Loop=1 2018-12-05T06:49:12.779Z,1543992552.779 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2014.339193 min 2018-12-05T06:49:12.779Z,1543992552.779 [Default:CheckIn:E] Stopped 2018-12-05T06:49:12.779Z,1543992552.779 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T06:49:12.779Z,1543992552.779 [Default:CheckIn] Stopped 2018-12-05T06:49:12.779Z,1543992552.779 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T06:49:12.779Z,1543992552.779 [Default:CheckIn](INFO): Running loop #196 2018-12-05T06:49:12.779Z,1543992552.779 [Default:CheckIn] Running Loop=196 2018-12-05T06:49:12.780Z,1543992552.780 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T06:49:12.780Z,1543992552.780 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T06:49:13.550Z,1543992553.550 [NAL9602](INFO): Powering up 2018-12-05T06:49:24.348Z,1543992564.348 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:49:25.148Z,1543992565.148 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T06:49:25.148Z,1543992565.148 [NAL9602] Data Fault, FailCount= 4 2018-12-05T06:49:25.148Z,1543992565.148 [NAL9602](ERROR): Data Fault 2018-12-05T06:49:25.209Z,1543992565.209 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T06:49:25.548Z,1543992565.548 [NAL9602](INFO): Powering down 2018-12-05T06:49:26.400Z,1543992566.400 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T06:49:26.400Z,1543992566.400 [NAL9602] No Fault, FailCount= 4 2018-12-05T06:49:33.153Z,1543992573.153 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:49:33.153Z,1543992573.153 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-05T06:49:33.153Z,1543992573.153 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:49:33.155Z,1543992573.155 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:49:33.155Z,1543992573.155 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-05T06:49:33.155Z,1543992573.155 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:49:33.169Z,1543992573.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:49:33.169Z,1543992573.169 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:49:33.570Z,1543992573.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:49:33.570Z,1543992573.570 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-05T06:49:33.571Z,1543992573.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:49:33.571Z,1543992573.571 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-05T06:49:33.956Z,1543992573.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:49:33.956Z,1543992573.956 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:49:33.957Z,1543992573.957 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:49:33.957Z,1543992573.957 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:49:33.958Z,1543992573.958 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:49:33.958Z,1543992573.958 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:49:34.351Z,1543992574.351 [BPC1](ERROR): BPC1A failed to parse battery data due to unrecognized msg size. 2018-12-05T06:49:34.359Z,1543992574.359 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size. 2018-12-05T06:49:39.955Z,1543992579.955 [BPC1](ERROR): BPC1A failed to parse battery data due to unrecognized msg size. 2018-12-05T06:49:39.966Z,1543992579.966 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size. 2018-12-05T06:49:55.924Z,1543992595.924 [NAL9602](INFO): Powering up NAL9602 2018-12-05T06:50:08.084Z,1543992608.084 [NAL9602](INFO): NAL9602 initialized 2018-12-05T06:51:34.085Z,1543992694.085 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:51:34.085Z,1543992694.085 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-05T06:51:34.086Z,1543992694.086 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:51:34.088Z,1543992694.088 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:51:34.088Z,1543992694.088 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-05T06:51:34.088Z,1543992694.088 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:51:34.101Z,1543992694.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:51:34.101Z,1543992694.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:51:34.514Z,1543992694.514 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:51:34.514Z,1543992694.514 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-05T06:51:34.515Z,1543992694.515 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:51:34.515Z,1543992694.515 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-05T06:51:34.894Z,1543992694.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:51:34.895Z,1543992694.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:51:34.895Z,1543992694.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:51:34.896Z,1543992694.896 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:51:34.896Z,1543992694.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:51:34.896Z,1543992694.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:52:08.031Z,1543992728.031 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T06:52:08.031Z,1543992728.031 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T06:52:08.031Z,1543992728.031 [DropWeight](ERROR): Hardware Fault 2018-12-05T06:52:08.087Z,1543992728.087 [CBIT](INFO): Critical error at 20181205T065208 2018-12-05T06:52:08.090Z,1543992728.090 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T06:52:08.090Z,1543992728.090 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T06:52:08.483Z,1543992728.483 [CBIT](INFO): Critical error at 20181205T065208 2018-12-05T06:53:35.294Z,1543992815.294 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:53:35.294Z,1543992815.294 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-05T06:53:35.294Z,1543992815.294 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:53:35.296Z,1543992815.296 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:53:35.296Z,1543992815.296 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-05T06:53:35.297Z,1543992815.297 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:53:35.387Z,1543992815.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:53:35.387Z,1543992815.387 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:53:35.712Z,1543992815.712 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:53:35.712Z,1543992815.712 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-05T06:53:35.713Z,1543992815.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:53:35.713Z,1543992815.713 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-05T06:53:38.836Z,1543992818.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:53:38.837Z,1543992818.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:53:38.837Z,1543992818.837 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:53:38.837Z,1543992818.837 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:53:38.838Z,1543992818.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:53:38.838Z,1543992818.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:54:14.061Z,1543992854.061 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T06:49:12.8Z 2018-12-05T06:54:14.061Z,1543992854.061 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T06:54:14.061Z,1543992854.061 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T06:54:19.174Z,1543992859.174 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0585.lzma 2018-12-05T06:54:19.973Z,1543992859.973 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0585.lzma.bak 2018-12-05T06:54:19.973Z,1543992859.973 [DataOverHttps](INFO): SBD MOMSN=8967678 2018-12-05T06:54:29.581Z,1543992869.581 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0586.lzma 2018-12-05T06:54:30.381Z,1543992870.381 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0586.lzma.bak 2018-12-05T06:54:30.381Z,1543992870.381 [DataOverHttps](INFO): SBD MOMSN=8967682 2018-12-05T06:54:31.990Z,1543992871.990 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T06:54:31.990Z,1543992871.990 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T06:54:31.990Z,1543992871.990 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T06:55:11.607Z,1543992911.607 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T06:55:39.230Z,1543992939.230 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:55:39.230Z,1543992939.230 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-05T06:55:39.230Z,1543992939.230 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:55:39.232Z,1543992939.232 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:55:39.233Z,1543992939.233 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-05T06:55:39.233Z,1543992939.233 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:55:39.246Z,1543992939.246 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:55:39.246Z,1543992939.246 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:55:39.642Z,1543992939.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:55:39.642Z,1543992939.642 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-05T06:55:39.643Z,1543992939.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:55:39.643Z,1543992939.643 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-05T06:55:40.023Z,1543992940.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:55:40.024Z,1543992940.024 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:55:40.024Z,1543992940.024 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:55:40.025Z,1543992940.025 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:55:40.025Z,1543992940.025 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:55:40.025Z,1543992940.025 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:55:42.400Z,1543992942.400 [NAL9602](INFO): Powering down 2018-12-05T06:56:02.533Z,1543992962.533 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T06:57:40.401Z,1543993060.401 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:57:40.401Z,1543993060.401 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-05T06:57:40.401Z,1543993060.401 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:57:40.403Z,1543993060.403 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:57:40.403Z,1543993060.403 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-05T06:57:40.403Z,1543993060.403 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:57:40.416Z,1543993060.416 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:57:40.417Z,1543993060.417 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:57:40.822Z,1543993060.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:57:40.822Z,1543993060.822 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-05T06:57:40.827Z,1543993060.827 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:57:40.827Z,1543993060.827 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-05T06:57:41.206Z,1543993061.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:57:41.206Z,1543993061.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:57:41.207Z,1543993061.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:57:41.207Z,1543993061.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:57:41.207Z,1543993061.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:57:41.208Z,1543993061.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:59:32.306Z,1543993172.306 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T06:59:32.306Z,1543993172.306 [Default:CheckIn:C.Wait] Stopped 2018-12-05T06:59:32.306Z,1543993172.306 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T06:59:32.306Z,1543993172.306 [Default:CheckIn:D] Running Loop=1 2018-12-05T06:59:32.710Z,1543993172.710 [Default:CheckIn:D] Stopped 2018-12-05T06:59:32.710Z,1543993172.710 [Default:CheckIn:E] Running Loop=1 2018-12-05T06:59:33.105Z,1543993173.105 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2024.678125 min 2018-12-05T06:59:33.105Z,1543993173.105 [Default:CheckIn:E] Stopped 2018-12-05T06:59:33.105Z,1543993173.105 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T06:59:33.106Z,1543993173.106 [Default:CheckIn] Stopped 2018-12-05T06:59:33.106Z,1543993173.106 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T06:59:33.106Z,1543993173.106 [Default:CheckIn](INFO): Running loop #197 2018-12-05T06:59:33.106Z,1543993173.106 [Default:CheckIn] Running Loop=197 2018-12-05T06:59:33.106Z,1543993173.106 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T06:59:33.106Z,1543993173.106 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T06:59:33.882Z,1543993173.882 [NAL9602](INFO): Powering up 2018-12-05T06:59:41.498Z,1543993181.498 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:59:41.498Z,1543993181.498 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-05T06:59:41.498Z,1543993181.498 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T06:59:41.500Z,1543993181.500 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T06:59:41.501Z,1543993181.501 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-05T06:59:41.501Z,1543993181.501 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T06:59:41.570Z,1543993181.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T06:59:41.570Z,1543993181.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T06:59:41.914Z,1543993181.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T06:59:41.914Z,1543993181.914 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-05T06:59:41.915Z,1543993181.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T06:59:41.915Z,1543993181.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-05T06:59:42.306Z,1543993182.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T06:59:42.306Z,1543993182.306 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:59:42.307Z,1543993182.307 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:59:42.307Z,1543993182.307 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T06:59:42.307Z,1543993182.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T06:59:42.308Z,1543993182.308 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T06:59:45.075Z,1543993185.075 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:01:42.438Z,1543993302.438 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:01:42.438Z,1543993302.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-05T07:01:42.438Z,1543993302.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:01:42.440Z,1543993302.440 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:01:42.440Z,1543993302.440 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-05T07:01:42.440Z,1543993302.440 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:01:42.454Z,1543993302.454 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:01:42.455Z,1543993302.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:01:42.859Z,1543993302.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:01:42.860Z,1543993302.860 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-05T07:01:42.860Z,1543993302.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:01:42.860Z,1543993302.860 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-05T07:01:43.231Z,1543993303.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:01:43.231Z,1543993303.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:01:43.231Z,1543993303.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:01:43.232Z,1543993303.232 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:01:43.232Z,1543993303.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:01:43.233Z,1543993303.233 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:03:43.299Z,1543993423.299 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:03:43.299Z,1543993423.299 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-05T07:03:43.299Z,1543993423.299 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:03:43.301Z,1543993423.301 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:03:43.301Z,1543993423.301 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-05T07:03:43.301Z,1543993423.301 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:03:43.363Z,1543993423.363 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:03:43.364Z,1543993423.364 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:03:43.733Z,1543993423.733 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:03:43.733Z,1543993423.733 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-05T07:03:43.734Z,1543993423.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:03:43.734Z,1543993423.734 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-05T07:03:44.117Z,1543993424.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:03:44.117Z,1543993424.117 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:03:44.118Z,1543993424.118 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:03:44.118Z,1543993424.118 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:03:44.119Z,1543993424.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:03:44.119Z,1543993424.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:04:33.618Z,1543993473.618 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T06:59:33.1Z 2018-12-05T07:04:33.618Z,1543993473.618 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T07:04:33.618Z,1543993473.618 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T07:04:38.615Z,1543993478.615 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0588.lzma 2018-12-05T07:04:39.389Z,1543993479.389 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0588.lzma.bak 2018-12-05T07:04:39.390Z,1543993479.390 [DataOverHttps](INFO): SBD MOMSN=8967704 2018-12-05T07:04:49.245Z,1543993489.245 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T07:04:49.307Z,1543993489.307 [DataOverHttps](INFO): Sending 289 bytes from file Logs/20181203T211451/Express0589.lzma 2018-12-05T07:04:50.105Z,1543993490.105 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0589.lzma.bak 2018-12-05T07:04:50.105Z,1543993490.105 [DataOverHttps](INFO): SBD MOMSN=8967706 2018-12-05T07:04:51.487Z,1543993491.487 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T07:04:51.487Z,1543993491.487 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T07:04:51.487Z,1543993491.487 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T07:05:19.467Z,1543993519.467 [NAL9602](INFO): Powering down 2018-12-05T07:05:44.243Z,1543993544.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:05:44.243Z,1543993544.243 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-05T07:05:44.243Z,1543993544.243 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:05:44.245Z,1543993544.245 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:05:44.245Z,1543993544.245 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-05T07:05:44.245Z,1543993544.245 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:05:44.259Z,1543993544.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:05:44.259Z,1543993544.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:05:44.661Z,1543993544.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:05:44.662Z,1543993544.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-05T07:05:44.662Z,1543993544.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:05:44.662Z,1543993544.662 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-05T07:05:45.046Z,1543993545.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:05:45.046Z,1543993545.046 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:05:45.047Z,1543993545.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:05:45.047Z,1543993545.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:05:45.047Z,1543993545.047 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:05:45.048Z,1543993545.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:07:08.378Z,1543993628.378 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T07:07:08.378Z,1543993628.378 [DropWeight] No Fault, FailCount= 1 2018-12-05T07:07:45.167Z,1543993665.167 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:07:45.167Z,1543993665.167 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-05T07:07:45.167Z,1543993665.167 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:07:45.169Z,1543993665.169 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:07:45.169Z,1543993665.169 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-05T07:07:45.169Z,1543993665.169 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:07:45.183Z,1543993665.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:07:45.183Z,1543993665.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:07:45.590Z,1543993665.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:07:45.590Z,1543993665.590 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-05T07:07:45.591Z,1543993665.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:07:45.591Z,1543993665.591 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-05T07:07:45.978Z,1543993665.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:07:45.978Z,1543993665.978 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:07:45.979Z,1543993665.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:07:45.979Z,1543993665.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:07:45.980Z,1543993665.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:07:45.980Z,1543993665.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:09:46.034Z,1543993786.034 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:09:46.035Z,1543993786.035 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-05T07:09:46.035Z,1543993786.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:09:46.037Z,1543993786.037 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:09:46.037Z,1543993786.037 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-05T07:09:46.037Z,1543993786.037 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:09:46.051Z,1543993786.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:09:46.051Z,1543993786.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:09:46.445Z,1543993786.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:09:46.445Z,1543993786.445 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-05T07:09:46.445Z,1543993786.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:09:46.445Z,1543993786.445 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-05T07:09:46.831Z,1543993786.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:09:46.832Z,1543993786.832 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:09:46.832Z,1543993786.832 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:09:46.832Z,1543993786.832 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:09:46.833Z,1543993786.833 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:09:46.833Z,1543993786.833 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:09:51.635Z,1543993791.635 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T07:09:51.636Z,1543993791.636 [Default:CheckIn:C.Wait] Stopped 2018-12-05T07:09:51.636Z,1543993791.636 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T07:09:51.636Z,1543993791.636 [Default:CheckIn:D] Running Loop=1 2018-12-05T07:09:52.046Z,1543993792.046 [Default:CheckIn:D] Stopped 2018-12-05T07:09:52.046Z,1543993792.046 [Default:CheckIn:E] Running Loop=1 2018-12-05T07:09:52.437Z,1543993792.437 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2035.000391 min 2018-12-05T07:09:52.437Z,1543993792.437 [Default:CheckIn:E] Stopped 2018-12-05T07:09:52.438Z,1543993792.438 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T07:09:52.438Z,1543993792.438 [Default:CheckIn] Stopped 2018-12-05T07:09:52.438Z,1543993792.438 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T07:09:52.438Z,1543993792.438 [Default:CheckIn](INFO): Running loop #198 2018-12-05T07:09:52.438Z,1543993792.438 [Default:CheckIn] Running Loop=198 2018-12-05T07:09:52.438Z,1543993792.438 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T07:09:52.438Z,1543993792.438 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T07:09:53.208Z,1543993793.208 [NAL9602](INFO): Powering up 2018-12-05T07:10:04.408Z,1543993804.408 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:10:05.208Z,1543993805.208 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T07:10:05.208Z,1543993805.208 [NAL9602] Data Fault, FailCount= 5 2018-12-05T07:10:05.208Z,1543993805.208 [NAL9602](ERROR): Data Fault 2018-12-05T07:10:05.271Z,1543993805.271 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T07:10:05.271Z,1543993805.271 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T07:10:05.608Z,1543993805.608 [NAL9602](INFO): Powering down 2018-12-05T07:10:05.661Z,1543993805.661 [CBIT](INFO): Critical error at 20181205T071005 2018-12-05T07:11:47.218Z,1543993907.218 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:11:47.218Z,1543993907.218 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-05T07:11:47.219Z,1543993907.219 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:11:47.221Z,1543993907.221 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:11:47.221Z,1543993907.221 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-05T07:11:47.221Z,1543993907.221 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:11:47.263Z,1543993907.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:11:47.264Z,1543993907.264 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:11:47.626Z,1543993907.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:11:47.626Z,1543993907.626 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-05T07:11:47.627Z,1543993907.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:11:47.627Z,1543993907.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-05T07:11:48.012Z,1543993908.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:11:48.012Z,1543993908.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:11:48.012Z,1543993908.012 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:11:48.013Z,1543993908.013 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:11:48.013Z,1543993908.013 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:11:48.014Z,1543993908.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:12:05.585Z,1543993925.585 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T07:12:05.585Z,1543993925.585 [NAL9602] No Fault, FailCount= 5 2018-12-05T07:12:05.940Z,1543993925.940 [NAL9602](INFO): Powering up NAL9602 2018-12-05T07:12:17.140Z,1543993937.140 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:13:48.198Z,1543994028.198 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:13:48.198Z,1543994028.198 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-05T07:13:48.198Z,1543994028.198 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:13:48.200Z,1543994028.200 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:13:48.200Z,1543994028.200 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-05T07:13:48.201Z,1543994028.201 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:13:48.214Z,1543994028.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:13:48.215Z,1543994028.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:13:48.614Z,1543994028.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:13:48.614Z,1543994028.614 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-05T07:13:48.615Z,1543994028.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:13:48.615Z,1543994028.615 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-05T07:13:49.002Z,1543994029.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:13:49.002Z,1543994029.002 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:13:49.003Z,1543994029.003 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:13:49.003Z,1543994029.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:13:49.003Z,1543994029.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:13:49.004Z,1543994029.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:14:53.696Z,1543994093.696 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T07:09:52.4Z 2018-12-05T07:14:53.696Z,1543994093.696 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T07:14:53.696Z,1543994093.696 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T07:14:58.624Z,1543994098.624 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0591.lzma 2018-12-05T07:14:59.425Z,1543994099.425 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0591.lzma.bak 2018-12-05T07:14:59.426Z,1543994099.426 [DataOverHttps](INFO): SBD MOMSN=8967729 2018-12-05T07:15:08.851Z,1543994108.851 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0592.lzma 2018-12-05T07:15:09.633Z,1543994109.633 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0592.lzma.bak 2018-12-05T07:15:09.633Z,1543994109.633 [DataOverHttps](INFO): SBD MOMSN=8967732 2018-12-05T07:15:10.999Z,1543994110.999 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T07:15:10.999Z,1543994110.999 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T07:15:10.999Z,1543994110.999 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T07:15:49.903Z,1543994149.903 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:15:49.903Z,1543994149.903 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-05T07:15:49.903Z,1543994149.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:15:49.905Z,1543994149.905 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:15:49.905Z,1543994149.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-05T07:15:49.905Z,1543994149.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:15:49.951Z,1543994149.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:15:49.951Z,1543994149.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:15:50.042Z,1543994150.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:15:50.042Z,1543994150.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-05T07:15:50.047Z,1543994150.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:15:50.047Z,1543994150.047 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-05T07:15:50.402Z,1543994150.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:15:50.402Z,1543994150.402 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:15:50.403Z,1543994150.403 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:15:50.403Z,1543994150.403 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:15:50.403Z,1543994150.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:15:50.404Z,1543994150.404 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:17:20.400Z,1543994240.400 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T07:17:50.779Z,1543994270.779 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:17:50.779Z,1543994270.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-05T07:17:50.779Z,1543994270.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:17:50.781Z,1543994270.781 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:17:50.781Z,1543994270.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-05T07:17:50.781Z,1543994270.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:17:50.795Z,1543994270.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:17:50.795Z,1543994270.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:17:51.156Z,1543994271.156 [NAL9602](INFO): Powering down 2018-12-05T07:17:51.210Z,1543994271.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:17:51.210Z,1543994271.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-05T07:17:51.215Z,1543994271.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:17:51.215Z,1543994271.215 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-05T07:17:51.581Z,1543994271.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:17:51.582Z,1543994271.582 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:17:51.582Z,1543994271.582 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:17:51.583Z,1543994271.583 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:17:51.583Z,1543994271.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:17:51.583Z,1543994271.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:19:51.666Z,1543994391.666 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:19:51.666Z,1543994391.666 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-05T07:19:51.666Z,1543994391.666 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:19:51.668Z,1543994391.668 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:19:51.668Z,1543994391.668 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-05T07:19:51.669Z,1543994391.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:19:51.683Z,1543994391.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:19:51.683Z,1543994391.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:19:52.073Z,1543994392.073 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:19:52.074Z,1543994392.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-05T07:19:52.074Z,1543994392.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:19:52.074Z,1543994392.074 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-05T07:19:52.469Z,1543994392.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:19:52.469Z,1543994392.469 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:19:52.469Z,1543994392.469 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:19:52.470Z,1543994392.470 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:19:52.470Z,1543994392.470 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:19:52.471Z,1543994392.471 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:20:11.287Z,1543994411.287 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T07:20:11.287Z,1543994411.287 [Default:CheckIn:C.Wait] Stopped 2018-12-05T07:20:11.287Z,1543994411.287 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T07:20:11.287Z,1543994411.287 [Default:CheckIn:D] Running Loop=1 2018-12-05T07:20:11.676Z,1543994411.676 [Default:CheckIn:D] Stopped 2018-12-05T07:20:11.676Z,1543994411.676 [Default:CheckIn:E] Running Loop=1 2018-12-05T07:20:12.082Z,1543994412.082 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2045.327604 min 2018-12-05T07:20:12.082Z,1543994412.082 [Default:CheckIn:E] Stopped 2018-12-05T07:20:12.082Z,1543994412.082 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T07:20:12.082Z,1543994412.082 [Default:CheckIn] Stopped 2018-12-05T07:20:12.083Z,1543994412.083 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T07:20:12.083Z,1543994412.083 [Default:CheckIn](INFO): Running loop #199 2018-12-05T07:20:12.083Z,1543994412.083 [Default:CheckIn] Running Loop=199 2018-12-05T07:20:12.083Z,1543994412.083 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T07:20:12.083Z,1543994412.083 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T07:20:12.846Z,1543994412.846 [NAL9602](INFO): Powering up 2018-12-05T07:20:23.652Z,1543994423.652 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:20:55.600Z,1543994455.600 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T07:20:55.678Z,1543994455.678 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T07:20:55.678Z,1543994455.678 [NAL9602] Data Fault, FailCount= 1 2018-12-05T07:20:55.678Z,1543994455.678 [NAL9602](ERROR): Data Fault 2018-12-05T07:20:55.717Z,1543994455.717 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T07:20:55.000Z,1543994456.000 [NAL9602](INFO): Powering down 2018-12-05T07:20:56.852Z,1543994456.852 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T07:20:56.853Z,1543994456.853 [NAL9602] No Fault, FailCount= 1 2018-12-05T07:21:26.364Z,1543994486.364 [NAL9602](INFO): Powering up NAL9602 2018-12-05T07:21:37.568Z,1543994497.568 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:21:52.552Z,1543994512.552 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:21:52.553Z,1543994512.553 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-05T07:21:52.553Z,1543994512.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:21:52.555Z,1543994512.555 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:21:52.555Z,1543994512.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-05T07:21:52.555Z,1543994512.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:21:52.571Z,1543994512.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:21:52.571Z,1543994512.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:21:52.975Z,1543994512.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:21:52.975Z,1543994512.975 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-05T07:21:52.976Z,1543994512.976 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:21:52.976Z,1543994512.976 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-05T07:21:53.342Z,1543994513.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:21:53.342Z,1543994513.342 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:21:53.343Z,1543994513.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:21:53.343Z,1543994513.343 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:21:53.343Z,1543994513.343 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:21:53.344Z,1543994513.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:23:53.423Z,1543994633.423 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:23:53.423Z,1543994633.423 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-05T07:23:53.423Z,1543994633.423 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:23:53.425Z,1543994633.425 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:23:53.425Z,1543994633.425 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-05T07:23:53.425Z,1543994633.425 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:23:53.439Z,1543994633.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:23:53.439Z,1543994633.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:23:53.847Z,1543994633.847 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:23:53.847Z,1543994633.847 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-05T07:23:53.848Z,1543994633.848 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:23:53.848Z,1543994633.848 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-05T07:23:54.230Z,1543994634.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:23:54.230Z,1543994634.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:23:54.231Z,1543994634.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:23:54.231Z,1543994634.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:23:54.231Z,1543994634.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:23:54.232Z,1543994634.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:25:13.274Z,1543994713.274 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T07:20:12.1Z 2018-12-05T07:25:13.275Z,1543994713.275 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T07:25:13.275Z,1543994713.275 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T07:25:18.421Z,1543994718.421 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0594.lzma 2018-12-05T07:25:19.221Z,1543994719.221 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0594.lzma.bak 2018-12-05T07:25:19.222Z,1543994719.222 [DataOverHttps](INFO): SBD MOMSN=8967754 2018-12-05T07:25:28.478Z,1543994728.478 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T07:25:28.653Z,1543994728.653 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20181203T211451/Express0595.lzma 2018-12-05T07:25:29.333Z,1543994729.333 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0595.lzma.bak 2018-12-05T07:25:29.333Z,1543994729.333 [DataOverHttps](INFO): SBD MOMSN=8967756 2018-12-05T07:25:30.849Z,1543994730.849 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T07:25:30.849Z,1543994730.849 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T07:25:30.850Z,1543994730.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T07:25:54.246Z,1543994754.246 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:25:54.246Z,1543994754.246 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-05T07:25:54.246Z,1543994754.246 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:25:54.248Z,1543994754.248 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:25:54.249Z,1543994754.249 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-05T07:25:54.249Z,1543994754.249 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:25:54.262Z,1543994754.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:25:54.262Z,1543994754.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:25:54.654Z,1543994754.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:25:54.654Z,1543994754.654 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-05T07:25:54.654Z,1543994754.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:25:54.654Z,1543994754.654 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-05T07:25:55.040Z,1543994755.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:25:55.041Z,1543994755.041 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:25:55.041Z,1543994755.041 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:25:55.041Z,1543994755.041 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:25:55.042Z,1543994755.042 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:25:55.042Z,1543994755.042 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:25:59.015Z,1543994759.015 [NAL9602](INFO): Powering down 2018-12-05T07:27:55.225Z,1543994875.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:27:55.225Z,1543994875.225 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-05T07:27:55.225Z,1543994875.225 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:27:55.227Z,1543994875.227 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:27:55.227Z,1543994875.227 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-05T07:27:55.227Z,1543994875.227 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:27:55.241Z,1543994875.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:27:55.241Z,1543994875.241 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:27:55.361Z,1543994875.361 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:27:55.361Z,1543994875.361 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-05T07:27:55.361Z,1543994875.361 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:27:55.362Z,1543994875.362 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-05T07:27:55.680Z,1543994875.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:27:55.680Z,1543994875.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:27:55.680Z,1543994875.680 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:27:55.681Z,1543994875.681 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:27:55.681Z,1543994875.681 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:27:55.682Z,1543994875.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:29:16.252Z,1543994956.252 [CBIT](IMPORTANT): Beginning ground fault scan 2018-12-05T07:29:27.048Z,1543994967.048 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.144906 CHAN A1 (24V): 0.000921 CHAN A2 (12V): -0.005166 CHAN A3 (5V): -0.002825 CHAN B0 (3.3V): -0.001135 CHAN B1 (3.15aV): -0.001597 CHAN B2 (3.15bV): -0.001235 CHAN B3 (GND): -0.000551 OPEN: -0.001321 Full Scale Calc: 4.765 mA, -1.589 mA 2018-12-05T07:29:55.895Z,1543994995.895 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:29:55.895Z,1543994995.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-05T07:29:55.895Z,1543994995.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:29:55.897Z,1543994995.897 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:29:55.897Z,1543994995.897 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-05T07:29:55.897Z,1543994995.897 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:29:55.910Z,1543994995.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:29:55.910Z,1543994995.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:29:56.318Z,1543994996.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:29:56.318Z,1543994996.318 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-05T07:29:56.318Z,1543994996.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:29:56.318Z,1543994996.318 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-05T07:29:56.702Z,1543994996.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:29:56.702Z,1543994996.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:29:56.703Z,1543994996.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:29:56.703Z,1543994996.703 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:29:56.703Z,1543994996.703 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:29:56.704Z,1543994996.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:30:31.060Z,1543995031.060 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T07:30:31.060Z,1543995031.060 [Default:CheckIn:C.Wait] Stopped 2018-12-05T07:30:31.060Z,1543995031.060 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T07:30:31.060Z,1543995031.060 [Default:CheckIn:D] Running Loop=1 2018-12-05T07:30:31.468Z,1543995031.468 [Default:CheckIn:D] Stopped 2018-12-05T07:30:31.468Z,1543995031.468 [Default:CheckIn:E] Running Loop=1 2018-12-05T07:30:31.868Z,1543995031.868 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2055.657422 min 2018-12-05T07:30:31.868Z,1543995031.868 [Default:CheckIn:E] Stopped 2018-12-05T07:30:31.869Z,1543995031.869 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T07:30:31.869Z,1543995031.869 [Default:CheckIn] Stopped 2018-12-05T07:30:31.869Z,1543995031.869 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T07:30:31.869Z,1543995031.869 [Default:CheckIn](INFO): Running loop #200 2018-12-05T07:30:31.869Z,1543995031.869 [Default:CheckIn] Running Loop=200 2018-12-05T07:30:31.869Z,1543995031.869 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T07:30:31.869Z,1543995031.869 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T07:30:32.628Z,1543995032.628 [NAL9602](INFO): Powering up 2018-12-05T07:30:43.828Z,1543995043.828 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:30:44.628Z,1543995044.628 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T07:30:44.628Z,1543995044.628 [NAL9602] Data Fault, FailCount= 2 2018-12-05T07:30:44.628Z,1543995044.628 [NAL9602](ERROR): Data Fault 2018-12-05T07:30:44.697Z,1543995044.697 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T07:30:45.028Z,1543995045.028 [NAL9602](INFO): Powering down 2018-12-05T07:30:45.882Z,1543995045.882 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T07:30:45.883Z,1543995045.883 [NAL9602] No Fault, FailCount= 2 2018-12-05T07:31:15.404Z,1543995075.404 [NAL9602](INFO): Powering up NAL9602 2018-12-05T07:31:26.956Z,1543995086.956 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:31:56.990Z,1543995116.990 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:31:56.990Z,1543995116.990 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-05T07:31:56.990Z,1543995116.990 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:31:56.992Z,1543995116.992 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:31:56.992Z,1543995116.992 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-05T07:31:56.992Z,1543995116.992 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:31:57.005Z,1543995117.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:31:57.006Z,1543995117.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:31:57.407Z,1543995117.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:31:57.407Z,1543995117.407 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-05T07:31:57.408Z,1543995117.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:31:57.408Z,1543995117.408 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-05T07:31:57.795Z,1543995117.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:31:57.796Z,1543995117.796 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:31:57.796Z,1543995117.796 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:31:57.796Z,1543995117.796 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:31:57.797Z,1543995117.797 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:31:57.797Z,1543995117.797 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:33:57.952Z,1543995237.952 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:33:57.952Z,1543995237.952 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-05T07:33:57.952Z,1543995237.952 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:33:57.970Z,1543995237.970 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:33:57.970Z,1543995237.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-05T07:33:57.971Z,1543995237.971 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:33:57.988Z,1543995237.988 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:33:57.989Z,1543995237.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:33:58.367Z,1543995238.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:33:58.368Z,1543995238.368 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-05T07:33:58.368Z,1543995238.368 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:33:58.368Z,1543995238.368 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-05T07:33:58.757Z,1543995238.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:33:58.757Z,1543995238.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:33:58.758Z,1543995238.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:33:58.758Z,1543995238.758 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:33:58.759Z,1543995238.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:33:58.759Z,1543995238.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:35:33.143Z,1543995333.143 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T07:30:31.9Z 2018-12-05T07:35:33.143Z,1543995333.143 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T07:35:33.143Z,1543995333.143 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T07:35:38.150Z,1543995338.150 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0597.lzma 2018-12-05T07:35:38.949Z,1543995338.949 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0597.lzma.bak 2018-12-05T07:35:38.949Z,1543995338.949 [DataOverHttps](INFO): SBD MOMSN=8967778 2018-12-05T07:35:48.504Z,1543995348.504 [DataOverHttps](INFO): Sending 487 bytes from file Logs/20181203T211451/Express0598.lzma 2018-12-05T07:35:49.305Z,1543995349.305 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0598.lzma.bak 2018-12-05T07:35:49.305Z,1543995349.305 [DataOverHttps](INFO): SBD MOMSN=8967780 2018-12-05T07:35:50.726Z,1543995350.726 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T07:35:50.727Z,1543995350.727 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T07:35:50.727Z,1543995350.727 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T07:35:58.806Z,1543995358.806 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:35:58.806Z,1543995358.806 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-05T07:35:58.807Z,1543995358.807 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:35:58.809Z,1543995358.809 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:35:58.809Z,1543995358.809 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-05T07:35:58.809Z,1543995358.809 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:35:58.851Z,1543995358.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:35:58.851Z,1543995358.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:35:59.238Z,1543995359.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:35:59.239Z,1543995359.239 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-05T07:35:59.239Z,1543995359.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:35:59.239Z,1543995359.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-05T07:35:59.601Z,1543995359.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:35:59.601Z,1543995359.601 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:35:59.602Z,1543995359.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:35:59.602Z,1543995359.602 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:35:59.603Z,1543995359.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:35:59.603Z,1543995359.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:36:29.931Z,1543995389.931 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T07:37:00.721Z,1543995420.721 [NAL9602](INFO): Powering down 2018-12-05T07:37:09.875Z,1543995429.875 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T07:37:09.875Z,1543995429.875 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T07:37:09.875Z,1543995429.875 [DropWeight](ERROR): Hardware Fault 2018-12-05T07:37:09.930Z,1543995429.930 [CBIT](INFO): Critical error at 20181205T073709 2018-12-05T07:37:09.953Z,1543995429.953 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T07:37:09.953Z,1543995429.953 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T07:37:10.318Z,1543995430.318 [CBIT](INFO): Critical error at 20181205T073709 2018-12-05T07:37:59.643Z,1543995479.643 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:37:59.644Z,1543995479.644 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-05T07:37:59.644Z,1543995479.644 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:37:59.646Z,1543995479.646 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:37:59.646Z,1543995479.646 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-05T07:37:59.646Z,1543995479.646 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:37:59.659Z,1543995479.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:37:59.660Z,1543995479.660 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:38:00.056Z,1543995480.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:38:00.056Z,1543995480.056 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-05T07:38:00.057Z,1543995480.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:38:00.057Z,1543995480.057 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-05T07:38:00.449Z,1543995480.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:38:00.450Z,1543995480.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:38:00.451Z,1543995480.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:38:00.451Z,1543995480.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:38:00.451Z,1543995480.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:38:00.452Z,1543995480.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:40:00.675Z,1543995600.675 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:40:00.675Z,1543995600.675 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-05T07:40:00.675Z,1543995600.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:40:00.678Z,1543995600.678 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:40:00.678Z,1543995600.678 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-05T07:40:00.678Z,1543995600.678 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:40:00.691Z,1543995600.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:40:00.691Z,1543995600.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:40:00.810Z,1543995600.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:40:00.810Z,1543995600.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-05T07:40:00.811Z,1543995600.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:40:00.811Z,1543995600.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-05T07:40:01.132Z,1543995601.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:40:01.132Z,1543995601.132 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:40:01.133Z,1543995601.133 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:40:01.133Z,1543995601.133 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:40:01.133Z,1543995601.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:40:01.134Z,1543995601.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:40:50.850Z,1543995650.850 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T07:40:50.850Z,1543995650.850 [Default:CheckIn:C.Wait] Stopped 2018-12-05T07:40:50.850Z,1543995650.850 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T07:40:50.851Z,1543995650.851 [Default:CheckIn:D] Running Loop=1 2018-12-05T07:40:51.245Z,1543995651.245 [Default:CheckIn:D] Stopped 2018-12-05T07:40:51.245Z,1543995651.245 [Default:CheckIn:E] Running Loop=1 2018-12-05T07:40:51.650Z,1543995651.650 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2065.987109 min 2018-12-05T07:40:51.650Z,1543995651.650 [Default:CheckIn:E] Stopped 2018-12-05T07:40:51.650Z,1543995651.650 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T07:40:51.651Z,1543995651.651 [Default:CheckIn] Stopped 2018-12-05T07:40:51.651Z,1543995651.651 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T07:40:51.651Z,1543995651.651 [Default:CheckIn](INFO): Running loop #201 2018-12-05T07:40:51.651Z,1543995651.651 [Default:CheckIn] Running Loop=201 2018-12-05T07:40:51.651Z,1543995651.651 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T07:40:51.651Z,1543995651.651 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T07:40:52.426Z,1543995652.426 [NAL9602](INFO): Powering up 2018-12-05T07:41:03.624Z,1543995663.624 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:41:35.236Z,1543995695.236 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T07:41:35.310Z,1543995695.310 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T07:41:35.310Z,1543995695.310 [NAL9602] Data Fault, FailCount= 3 2018-12-05T07:41:35.310Z,1543995695.310 [NAL9602](ERROR): Data Fault 2018-12-05T07:41:35.367Z,1543995695.367 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T07:41:35.635Z,1543995695.635 [NAL9602](INFO): Powering down 2018-12-05T07:41:36.479Z,1543995696.479 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T07:41:36.479Z,1543995696.479 [NAL9602] No Fault, FailCount= 3 2018-12-05T07:42:01.275Z,1543995721.275 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:42:01.275Z,1543995721.275 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-05T07:42:01.275Z,1543995721.275 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:42:01.277Z,1543995721.277 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:42:01.277Z,1543995721.277 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-05T07:42:01.277Z,1543995721.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:42:01.291Z,1543995721.291 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:42:01.292Z,1543995721.292 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:42:01.688Z,1543995721.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:42:01.688Z,1543995721.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-05T07:42:01.688Z,1543995721.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:42:01.688Z,1543995721.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-05T07:42:02.078Z,1543995722.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:42:02.079Z,1543995722.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:42:02.079Z,1543995722.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:42:02.080Z,1543995722.080 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:42:02.080Z,1543995722.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:42:02.080Z,1543995722.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:42:05.647Z,1543995725.647 [NAL9602](INFO): Powering up NAL9602 2018-12-05T07:42:16.851Z,1543995736.851 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:42:17.652Z,1543995737.652 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T07:42:17.652Z,1543995737.652 [NAL9602] Data Fault, FailCount= 4 2018-12-05T07:42:17.652Z,1543995737.652 [NAL9602](ERROR): Data Fault 2018-12-05T07:42:17.706Z,1543995737.706 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T07:42:18.047Z,1543995738.047 [NAL9602](INFO): Powering down 2018-12-05T07:42:21.583Z,1543995741.583 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T07:42:21.583Z,1543995741.583 [NAL9602] No Fault, FailCount= 4 2018-12-05T07:42:48.393Z,1543995768.393 [NAL9602](INFO): Powering up NAL9602 2018-12-05T07:42:59.563Z,1543995779.563 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:44:02.119Z,1543995842.119 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:44:02.119Z,1543995842.119 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-05T07:44:02.119Z,1543995842.119 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:44:02.121Z,1543995842.121 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:44:02.121Z,1543995842.121 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-05T07:44:02.121Z,1543995842.121 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:44:02.155Z,1543995842.155 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:44:02.156Z,1543995842.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:44:02.554Z,1543995842.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:44:02.554Z,1543995842.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-05T07:44:02.555Z,1543995842.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:44:02.555Z,1543995842.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-05T07:44:02.913Z,1543995842.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:44:02.914Z,1543995842.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:44:02.914Z,1543995842.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:44:02.915Z,1543995842.915 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:44:02.915Z,1543995842.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:44:02.916Z,1543995842.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:45:52.851Z,1543995952.851 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T07:40:51.7Z 2018-12-05T07:45:52.851Z,1543995952.851 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T07:45:52.851Z,1543995952.851 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T07:45:57.871Z,1543995957.871 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0600.lzma 2018-12-05T07:45:58.657Z,1543995958.657 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0600.lzma.bak 2018-12-05T07:45:58.658Z,1543995958.658 [DataOverHttps](INFO): SBD MOMSN=8967807 2018-12-05T07:46:03.290Z,1543995963.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:46:03.291Z,1543995963.291 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-05T07:46:03.291Z,1543995963.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:46:03.293Z,1543995963.293 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:46:03.293Z,1543995963.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-05T07:46:03.293Z,1543995963.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:46:03.355Z,1543995963.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:46:03.355Z,1543995963.355 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:46:03.443Z,1543995963.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:46:03.443Z,1543995963.443 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-05T07:46:03.444Z,1543995963.444 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:46:03.444Z,1543995963.444 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-05T07:46:03.814Z,1543995963.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:46:03.814Z,1543995963.814 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:46:03.815Z,1543995963.815 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:46:03.815Z,1543995963.815 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:46:03.815Z,1543995963.815 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:46:03.816Z,1543995963.816 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:46:08.096Z,1543995968.096 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T07:46:08.184Z,1543995968.184 [DataOverHttps](INFO): Sending 345 bytes from file Logs/20181203T211451/Express0601.lzma 2018-12-05T07:46:08.977Z,1543995968.977 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0601.lzma.bak 2018-12-05T07:46:08.978Z,1543995968.978 [DataOverHttps](INFO): SBD MOMSN=8967811 2018-12-05T07:46:10.343Z,1543995970.343 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T07:46:10.343Z,1543995970.343 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T07:46:10.343Z,1543995970.343 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T07:46:38.335Z,1543995998.335 [NAL9602](INFO): Powering down 2018-12-05T07:48:03.988Z,1543996083.988 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:48:03.989Z,1543996083.989 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-05T07:48:03.989Z,1543996083.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:48:03.991Z,1543996083.991 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:48:03.991Z,1543996083.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-05T07:48:03.991Z,1543996083.991 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:48:04.005Z,1543996084.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:48:04.005Z,1543996084.005 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:48:04.413Z,1543996084.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:48:04.413Z,1543996084.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-05T07:48:04.414Z,1543996084.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:48:04.414Z,1543996084.414 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-05T07:48:04.798Z,1543996084.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:48:04.798Z,1543996084.798 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:48:04.799Z,1543996084.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:48:04.799Z,1543996084.799 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:48:04.799Z,1543996084.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:48:04.800Z,1543996084.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:50:05.110Z,1543996205.110 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:50:05.110Z,1543996205.110 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-05T07:50:05.110Z,1543996205.110 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:50:05.112Z,1543996205.112 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:50:05.113Z,1543996205.113 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-05T07:50:05.113Z,1543996205.113 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:50:05.126Z,1543996205.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:50:05.126Z,1543996205.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:50:05.524Z,1543996205.524 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:50:05.524Z,1543996205.524 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-05T07:50:05.524Z,1543996205.524 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:50:05.525Z,1543996205.525 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-05T07:50:05.914Z,1543996205.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:50:05.914Z,1543996205.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:50:05.915Z,1543996205.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:50:05.926Z,1543996205.926 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:50:05.927Z,1543996205.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:50:05.927Z,1543996205.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:51:10.752Z,1543996270.752 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T07:51:10.752Z,1543996270.752 [Default:CheckIn:C.Wait] Stopped 2018-12-05T07:51:10.752Z,1543996270.752 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T07:51:10.752Z,1543996270.752 [Default:CheckIn:D] Running Loop=1 2018-12-05T07:51:11.154Z,1543996271.154 [Default:CheckIn:D] Stopped 2018-12-05T07:51:11.155Z,1543996271.155 [Default:CheckIn:E] Running Loop=1 2018-12-05T07:51:11.559Z,1543996271.559 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2076.318880 min 2018-12-05T07:51:11.559Z,1543996271.559 [Default:CheckIn:E] Stopped 2018-12-05T07:51:11.559Z,1543996271.559 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T07:51:11.559Z,1543996271.559 [Default:CheckIn] Stopped 2018-12-05T07:51:11.559Z,1543996271.559 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T07:51:11.560Z,1543996271.560 [Default:CheckIn](INFO): Running loop #202 2018-12-05T07:51:11.560Z,1543996271.560 [Default:CheckIn] Running Loop=202 2018-12-05T07:51:11.560Z,1543996271.560 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T07:51:11.560Z,1543996271.560 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T07:51:12.323Z,1543996272.323 [NAL9602](INFO): Powering up 2018-12-05T07:51:23.523Z,1543996283.523 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:51:55.476Z,1543996315.476 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T07:51:55.558Z,1543996315.558 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T07:51:55.558Z,1543996315.558 [NAL9602] Data Fault, FailCount= 5 2018-12-05T07:51:55.558Z,1543996315.558 [NAL9602](ERROR): Data Fault 2018-12-05T07:51:55.616Z,1543996315.616 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T07:51:55.617Z,1543996315.617 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T07:51:55.875Z,1543996315.875 [NAL9602](INFO): Powering down 2018-12-05T07:51:55.931Z,1543996315.931 [CBIT](INFO): Critical error at 20181205T075155 2018-12-05T07:52:06.249Z,1543996326.249 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:52:06.249Z,1543996326.249 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-05T07:52:06.249Z,1543996326.249 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:52:06.251Z,1543996326.251 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:52:06.252Z,1543996326.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-05T07:52:06.252Z,1543996326.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:52:06.265Z,1543996326.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:52:06.265Z,1543996326.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:52:06.682Z,1543996326.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:52:06.682Z,1543996326.682 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-05T07:52:06.683Z,1543996326.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:52:06.683Z,1543996326.683 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-05T07:52:07.057Z,1543996327.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:52:07.057Z,1543996327.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:52:07.057Z,1543996327.057 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:52:07.058Z,1543996327.058 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:52:07.058Z,1543996327.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:52:07.059Z,1543996327.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:52:10.267Z,1543996330.267 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T07:52:10.267Z,1543996330.267 [DropWeight] No Fault, FailCount= 1 2018-12-05T07:53:55.645Z,1543996435.645 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T07:53:55.645Z,1543996435.645 [NAL9602] No Fault, FailCount= 5 2018-12-05T07:53:56.008Z,1543996436.008 [NAL9602](INFO): Powering up NAL9602 2018-12-05T07:54:07.208Z,1543996447.208 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:54:07.245Z,1543996447.245 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:54:07.245Z,1543996447.245 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-05T07:54:07.245Z,1543996447.245 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:54:07.247Z,1543996447.247 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:54:07.247Z,1543996447.247 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-05T07:54:07.247Z,1543996447.247 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:54:07.260Z,1543996447.260 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:54:07.261Z,1543996447.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:54:07.654Z,1543996447.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:54:07.654Z,1543996447.654 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-05T07:54:07.655Z,1543996447.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:54:07.655Z,1543996447.655 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-05T07:54:08.008Z,1543996448.008 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T07:54:08.008Z,1543996448.008 [NAL9602] Data Fault, FailCount= 1 2018-12-05T07:54:08.008Z,1543996448.008 [NAL9602](ERROR): Data Fault 2018-12-05T07:54:08.028Z,1543996448.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:54:08.028Z,1543996448.028 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:54:08.029Z,1543996448.029 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:54:08.029Z,1543996448.029 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:54:08.029Z,1543996448.029 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:54:08.030Z,1543996448.030 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:54:08.064Z,1543996448.064 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T07:54:08.408Z,1543996448.408 [NAL9602](INFO): Powering down 2018-12-05T07:54:09.241Z,1543996449.241 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T07:54:09.241Z,1543996449.241 [NAL9602] No Fault, FailCount= 1 2018-12-05T07:54:38.784Z,1543996478.784 [NAL9602](INFO): Powering up NAL9602 2018-12-05T07:54:49.984Z,1543996489.984 [NAL9602](INFO): NAL9602 initialized 2018-12-05T07:56:08.129Z,1543996568.129 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:56:08.129Z,1543996568.129 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-05T07:56:08.129Z,1543996568.129 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:56:08.132Z,1543996568.132 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:56:08.132Z,1543996568.132 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-05T07:56:08.132Z,1543996568.132 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:56:08.145Z,1543996568.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:56:08.145Z,1543996568.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:56:08.554Z,1543996568.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T07:56:08.554Z,1543996568.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-05T07:56:08.555Z,1543996568.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T07:56:08.555Z,1543996568.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-05T07:56:08.926Z,1543996568.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T07:56:08.926Z,1543996568.926 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:56:08.927Z,1543996568.927 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:56:08.927Z,1543996568.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T07:56:08.927Z,1543996568.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T07:56:08.928Z,1543996568.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T07:56:12.529Z,1543996572.529 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T07:51:11.6Z 2018-12-05T07:56:12.529Z,1543996572.529 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T07:56:12.529Z,1543996572.529 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T07:56:17.482Z,1543996577.482 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0603.lzma 2018-12-05T07:56:18.281Z,1543996578.281 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0603.lzma.bak 2018-12-05T07:56:18.281Z,1543996578.281 [DataOverHttps](INFO): SBD MOMSN=8967836 2018-12-05T07:56:27.646Z,1543996587.646 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T07:56:27.721Z,1543996587.721 [DataOverHttps](INFO): Sending 356 bytes from file Logs/20181203T211451/Express0604.lzma 2018-12-05T07:56:28.501Z,1543996588.501 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0604.lzma.bak 2018-12-05T07:56:28.501Z,1543996588.501 [DataOverHttps](INFO): SBD MOMSN=8967839 2018-12-05T07:56:29.875Z,1543996589.875 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T07:56:29.875Z,1543996589.875 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T07:56:29.875Z,1543996589.875 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T07:56:57.867Z,1543996617.867 [NAL9602](INFO): Powering down 2018-12-05T07:58:08.935Z,1543996688.935 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:58:08.935Z,1543996688.935 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-05T07:58:08.935Z,1543996688.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T07:58:08.937Z,1543996688.937 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T07:58:08.937Z,1543996688.937 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-05T07:58:08.937Z,1543996688.937 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T07:58:08.967Z,1543996688.967 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:58:08.967Z,1543996688.967 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T07:58:08.968Z,1543996688.968 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T07:58:08.968Z,1543996688.968 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:00:18.928Z,1543996818.928 [Reporter](INFO): platform_buoyancy_position 962.232298 cc 2018-12-05T08:01:30.165Z,1543996890.165 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T08:01:30.166Z,1543996890.166 [Default:CheckIn:C.Wait] Stopped 2018-12-05T08:01:30.166Z,1543996890.166 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T08:01:30.166Z,1543996890.166 [Default:CheckIn:D] Running Loop=1 2018-12-05T08:01:30.561Z,1543996890.561 [Default:CheckIn:D] Stopped 2018-12-05T08:01:30.561Z,1543996890.561 [Default:CheckIn:E] Running Loop=1 2018-12-05T08:01:30.960Z,1543996890.960 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2086.642318 min 2018-12-05T08:01:30.960Z,1543996890.960 [Default:CheckIn:E] Stopped 2018-12-05T08:01:30.960Z,1543996890.960 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T08:01:30.961Z,1543996890.961 [Default:CheckIn] Stopped 2018-12-05T08:01:30.961Z,1543996890.961 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T08:01:30.961Z,1543996890.961 [Default:CheckIn](INFO): Running loop #203 2018-12-05T08:01:30.961Z,1543996890.961 [Default:CheckIn] Running Loop=203 2018-12-05T08:01:30.961Z,1543996890.961 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T08:01:30.961Z,1543996890.961 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T08:01:31.735Z,1543996891.735 [NAL9602](INFO): Powering up 2018-12-05T08:01:42.932Z,1543996902.932 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:03:31.065Z,1543997011.065 [BPC1](INFO): Calculating totals. Valid battery stick count: 55. Valid reserve battery stick count: 6. 2018-12-05T08:06:31.879Z,1543997191.879 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T08:01:30.0Z 2018-12-05T08:06:31.879Z,1543997191.879 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T08:06:31.879Z,1543997191.879 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T08:06:37.027Z,1543997197.027 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0606.lzma 2018-12-05T08:06:37.825Z,1543997197.825 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0606.lzma.bak 2018-12-05T08:06:37.826Z,1543997197.826 [DataOverHttps](INFO): SBD MOMSN=8967864 2018-12-05T08:06:47.154Z,1543997207.154 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T08:06:47.220Z,1543997207.220 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0607.lzma 2018-12-05T08:06:47.997Z,1543997207.997 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0607.lzma.bak 2018-12-05T08:06:47.997Z,1543997207.997 [DataOverHttps](INFO): SBD MOMSN=8967866 2018-12-05T08:06:49.326Z,1543997209.326 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T08:06:49.326Z,1543997209.326 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T08:06:49.326Z,1543997209.326 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T08:07:17.492Z,1543997237.492 [NAL9602](INFO): Powering down 2018-12-05T08:11:49.579Z,1543997509.579 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T08:11:49.579Z,1543997509.579 [Default:CheckIn:C.Wait] Stopped 2018-12-05T08:11:49.579Z,1543997509.579 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T08:11:49.579Z,1543997509.579 [Default:CheckIn:D] Running Loop=1 2018-12-05T08:11:49.972Z,1543997509.972 [Default:CheckIn:D] Stopped 2018-12-05T08:11:49.972Z,1543997509.972 [Default:CheckIn:E] Running Loop=1 2018-12-05T08:11:50.373Z,1543997510.373 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2096.965885 min 2018-12-05T08:11:50.374Z,1543997510.374 [Default:CheckIn:E] Stopped 2018-12-05T08:11:50.374Z,1543997510.374 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T08:11:50.374Z,1543997510.374 [Default:CheckIn] Stopped 2018-12-05T08:11:50.374Z,1543997510.374 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T08:11:50.374Z,1543997510.374 [Default:CheckIn](INFO): Running loop #204 2018-12-05T08:11:50.374Z,1543997510.374 [Default:CheckIn] Running Loop=204 2018-12-05T08:11:50.374Z,1543997510.374 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T08:11:50.374Z,1543997510.374 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T08:11:51.146Z,1543997511.146 [NAL9602](INFO): Powering up 2018-12-05T08:12:02.348Z,1543997522.348 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:12:03.148Z,1543997523.148 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T08:12:03.148Z,1543997523.148 [NAL9602] Data Fault, FailCount= 2 2018-12-05T08:12:03.148Z,1543997523.148 [NAL9602](ERROR): Data Fault 2018-12-05T08:12:03.202Z,1543997523.202 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T08:12:03.548Z,1543997523.548 [NAL9602](INFO): Powering down 2018-12-05T08:12:04.389Z,1543997524.389 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T08:12:04.389Z,1543997524.389 [NAL9602] No Fault, FailCount= 2 2018-12-05T08:12:33.890Z,1543997553.890 [NAL9602](INFO): Powering up NAL9602 2018-12-05T08:12:45.604Z,1543997565.604 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:13:09.262Z,1543997589.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:13:09.262Z,1543997589.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-05T08:13:09.263Z,1543997589.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:13:09.263Z,1543997589.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-05T08:13:09.642Z,1543997589.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:13:09.642Z,1543997589.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:13:09.643Z,1543997589.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:13:09.643Z,1543997589.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:13:09.644Z,1543997589.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:13:09.644Z,1543997589.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:15:09.650Z,1543997709.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:15:09.651Z,1543997709.651 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-05T08:15:09.651Z,1543997709.651 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:15:09.653Z,1543997709.653 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:15:09.653Z,1543997709.653 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-05T08:15:09.653Z,1543997709.653 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:15:09.667Z,1543997709.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:15:09.667Z,1543997709.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:15:10.061Z,1543997710.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:15:10.062Z,1543997710.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-05T08:15:10.062Z,1543997710.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:15:10.062Z,1543997710.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-05T08:15:10.445Z,1543997710.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:15:10.446Z,1543997710.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:15:10.446Z,1543997710.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:15:10.447Z,1543997710.447 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:15:10.447Z,1543997710.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:15:10.447Z,1543997710.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:16:51.755Z,1543997811.755 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T08:11:50.4Z 2018-12-05T08:16:51.755Z,1543997811.755 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T08:16:51.755Z,1543997811.755 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T08:16:56.749Z,1543997816.749 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0609.lzma 2018-12-05T08:16:57.542Z,1543997817.542 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0609.lzma.bak 2018-12-05T08:16:57.542Z,1543997817.542 [DataOverHttps](INFO): SBD MOMSN=8967881 2018-12-05T08:17:07.030Z,1543997827.030 [DataOverHttps](INFO): Sending 269 bytes from file Logs/20181203T211451/Express0610.lzma 2018-12-05T08:17:07.805Z,1543997827.805 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0610.lzma.bak 2018-12-05T08:17:07.805Z,1543997827.805 [DataOverHttps](INFO): SBD MOMSN=8967883 2018-12-05T08:17:09.171Z,1543997829.171 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T08:17:09.171Z,1543997829.171 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T08:17:09.171Z,1543997829.171 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T08:17:12.361Z,1543997832.361 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:17:12.361Z,1543997832.361 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-05T08:17:12.361Z,1543997832.361 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:17:12.391Z,1543997832.391 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:17:12.391Z,1543997832.391 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-05T08:17:12.391Z,1543997832.391 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:17:12.405Z,1543997832.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:17:12.405Z,1543997832.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:17:12.531Z,1543997832.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:17:12.531Z,1543997832.531 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-05T08:17:12.531Z,1543997832.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:17:12.531Z,1543997832.531 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-05T08:17:12.858Z,1543997832.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:17:12.858Z,1543997832.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:17:12.859Z,1543997832.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:17:12.859Z,1543997832.859 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:17:12.859Z,1543997832.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:17:12.860Z,1543997832.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:17:48.020Z,1543997868.020 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T08:18:18.792Z,1543997898.792 [NAL9602](INFO): Powering down 2018-12-05T08:19:13.184Z,1543997953.184 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:19:13.184Z,1543997953.184 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-05T08:19:13.184Z,1543997953.184 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:19:13.186Z,1543997953.186 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:19:13.187Z,1543997953.187 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-05T08:19:13.187Z,1543997953.187 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:19:13.220Z,1543997953.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:19:13.221Z,1543997953.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:19:13.608Z,1543997953.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:19:13.609Z,1543997953.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-05T08:19:13.609Z,1543997953.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:19:13.609Z,1543997953.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-05T08:19:13.993Z,1543997953.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:19:13.993Z,1543997953.993 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:19:13.994Z,1543997953.994 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:19:13.994Z,1543997953.994 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:19:13.995Z,1543997953.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:19:13.995Z,1543997953.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:21:14.368Z,1543998074.368 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:21:14.368Z,1543998074.368 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-05T08:21:14.368Z,1543998074.368 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:21:14.370Z,1543998074.370 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:21:14.370Z,1543998074.370 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-05T08:21:14.370Z,1543998074.370 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:21:14.396Z,1543998074.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:21:14.396Z,1543998074.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:21:14.803Z,1543998074.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:21:14.803Z,1543998074.803 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-05T08:21:14.804Z,1543998074.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:21:14.804Z,1543998074.804 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-05T08:21:15.168Z,1543998075.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:21:15.168Z,1543998075.168 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:21:15.169Z,1543998075.169 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:21:15.169Z,1543998075.169 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:21:15.169Z,1543998075.169 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:21:15.170Z,1543998075.170 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:22:09.670Z,1543998129.670 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T08:22:09.670Z,1543998129.670 [Default:CheckIn:C.Wait] Stopped 2018-12-05T08:22:09.670Z,1543998129.670 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T08:22:09.670Z,1543998129.670 [Default:CheckIn:D] Running Loop=1 2018-12-05T08:22:10.064Z,1543998130.064 [Default:CheckIn:D] Stopped 2018-12-05T08:22:10.064Z,1543998130.064 [Default:CheckIn:E] Running Loop=1 2018-12-05T08:22:10.468Z,1543998130.468 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2107.300651 min 2018-12-05T08:22:10.469Z,1543998130.469 [Default:CheckIn:E] Stopped 2018-12-05T08:22:10.469Z,1543998130.469 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T08:22:10.469Z,1543998130.469 [Default:CheckIn] Stopped 2018-12-05T08:22:10.469Z,1543998130.469 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T08:22:10.469Z,1543998130.469 [Default:CheckIn](INFO): Running loop #205 2018-12-05T08:22:10.469Z,1543998130.469 [Default:CheckIn] Running Loop=205 2018-12-05T08:22:10.469Z,1543998130.469 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T08:22:10.469Z,1543998130.469 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T08:22:11.235Z,1543998131.235 [NAL9602](INFO): Powering up 2018-12-05T08:22:11.639Z,1543998131.639 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T08:22:11.639Z,1543998131.639 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T08:22:11.639Z,1543998131.639 [DropWeight](ERROR): Hardware Fault 2018-12-05T08:22:11.711Z,1543998131.711 [CBIT](INFO): Critical error at 20181205T082211 2018-12-05T08:22:11.717Z,1543998131.717 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T08:22:11.717Z,1543998131.717 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T08:22:12.078Z,1543998132.078 [CBIT](INFO): Critical error at 20181205T082211 2018-12-05T08:22:22.435Z,1543998142.435 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:22:54.111Z,1543998174.111 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T08:22:54.186Z,1543998174.186 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T08:22:54.186Z,1543998174.186 [NAL9602] Data Fault, FailCount= 3 2018-12-05T08:22:54.186Z,1543998174.186 [NAL9602](ERROR): Data Fault 2018-12-05T08:22:54.245Z,1543998174.245 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T08:22:54.507Z,1543998174.507 [NAL9602](INFO): Powering down 2018-12-05T08:22:55.351Z,1543998175.351 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T08:22:55.351Z,1543998175.351 [NAL9602] No Fault, FailCount= 3 2018-12-05T08:23:15.278Z,1543998195.278 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:23:15.278Z,1543998195.278 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-05T08:23:15.278Z,1543998195.278 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:23:15.280Z,1543998195.280 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:23:15.281Z,1543998195.281 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-05T08:23:15.281Z,1543998195.281 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:23:15.294Z,1543998195.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:23:15.294Z,1543998195.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:23:15.698Z,1543998195.698 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:23:15.698Z,1543998195.698 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-05T08:23:15.699Z,1543998195.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:23:15.699Z,1543998195.699 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-05T08:23:16.082Z,1543998196.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:23:16.082Z,1543998196.082 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:23:16.083Z,1543998196.083 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:23:16.083Z,1543998196.083 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:23:16.083Z,1543998196.083 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:23:16.084Z,1543998196.084 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:23:24.859Z,1543998204.859 [NAL9602](INFO): Powering up NAL9602 2018-12-05T08:23:36.063Z,1543998216.063 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:23:36.863Z,1543998216.863 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T08:23:36.863Z,1543998216.863 [NAL9602] Data Fault, FailCount= 4 2018-12-05T08:23:36.863Z,1543998216.863 [NAL9602](ERROR): Data Fault 2018-12-05T08:23:36.905Z,1543998216.905 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T08:23:40.020Z,1543998220.020 [NAL9602](INFO): Powering down 2018-12-05T08:23:40.509Z,1543998220.509 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T08:23:40.509Z,1543998220.509 [NAL9602] No Fault, FailCount= 4 2018-12-05T08:24:10.065Z,1543998250.065 [NAL9602](INFO): Powering up NAL9602 2018-12-05T08:24:21.215Z,1543998261.215 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:25:16.190Z,1543998316.190 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:25:16.190Z,1543998316.190 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-05T08:25:16.190Z,1543998316.190 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:25:16.192Z,1543998316.192 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:25:16.193Z,1543998316.193 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-05T08:25:16.193Z,1543998316.193 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:25:16.206Z,1543998316.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:25:16.206Z,1543998316.206 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:25:16.602Z,1543998316.602 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:25:16.602Z,1543998316.602 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-05T08:25:16.603Z,1543998316.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:25:16.603Z,1543998316.603 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-05T08:25:16.989Z,1543998316.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:25:16.990Z,1543998316.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:25:16.990Z,1543998316.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:25:16.991Z,1543998316.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:25:16.991Z,1543998316.991 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:25:16.992Z,1543998316.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:27:11.339Z,1543998431.339 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T08:22:10.5Z 2018-12-05T08:27:11.339Z,1543998431.339 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T08:27:11.339Z,1543998431.339 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T08:27:16.494Z,1543998436.494 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0612.lzma 2018-12-05T08:27:17.286Z,1543998437.286 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0612.lzma.bak 2018-12-05T08:27:17.286Z,1543998437.286 [DataOverHttps](INFO): SBD MOMSN=8967899 2018-12-05T08:27:17.342Z,1543998437.342 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:27:17.343Z,1543998437.343 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-05T08:27:17.343Z,1543998437.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:27:17.345Z,1543998437.345 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:27:17.345Z,1543998437.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-05T08:27:17.345Z,1543998437.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:27:17.375Z,1543998437.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:27:17.375Z,1543998437.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:27:18.664Z,1543998438.664 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:27:18.664Z,1543998438.664 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-05T08:27:18.665Z,1543998438.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:27:18.665Z,1543998438.665 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-05T08:27:18.754Z,1543998438.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:27:18.755Z,1543998438.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:27:18.756Z,1543998438.756 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:27:18.756Z,1543998438.756 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:27:18.756Z,1543998438.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:27:18.757Z,1543998438.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:27:27.212Z,1543998447.212 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T08:27:27.276Z,1543998447.276 [DataOverHttps](INFO): Sending 345 bytes from file Logs/20181203T211451/Express0613.lzma 2018-12-05T08:27:28.077Z,1543998448.077 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0613.lzma.bak 2018-12-05T08:27:28.077Z,1543998448.077 [DataOverHttps](INFO): SBD MOMSN=8967903 2018-12-05T08:27:29.421Z,1543998449.421 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T08:27:29.421Z,1543998449.421 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T08:27:29.422Z,1543998449.422 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T08:27:57.587Z,1543998477.587 [NAL9602](INFO): Powering down 2018-12-05T08:29:18.982Z,1543998558.982 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:29:18.982Z,1543998558.982 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-05T08:29:18.982Z,1543998558.982 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:29:18.984Z,1543998558.984 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:29:18.984Z,1543998558.984 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-05T08:29:18.985Z,1543998558.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:29:18.998Z,1543998558.998 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:29:18.999Z,1543998558.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:29:19.394Z,1543998559.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:29:19.394Z,1543998559.394 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-05T08:29:19.395Z,1543998559.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:29:19.395Z,1543998559.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-05T08:29:19.781Z,1543998559.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:29:19.782Z,1543998559.782 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:29:19.782Z,1543998559.782 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:29:19.783Z,1543998559.783 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:29:19.783Z,1543998559.783 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:29:19.783Z,1543998559.783 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:31:19.834Z,1543998679.834 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:31:19.834Z,1543998679.834 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-05T08:31:19.834Z,1543998679.834 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:31:19.836Z,1543998679.836 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:31:19.836Z,1543998679.836 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-05T08:31:19.836Z,1543998679.836 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:31:19.850Z,1543998679.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:31:19.851Z,1543998679.851 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:31:20.250Z,1543998680.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:31:20.250Z,1543998680.250 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-05T08:31:20.251Z,1543998680.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:31:20.251Z,1543998680.251 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-05T08:31:20.638Z,1543998680.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:31:20.638Z,1543998680.638 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:31:20.639Z,1543998680.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:31:20.639Z,1543998680.639 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:31:20.640Z,1543998680.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:31:20.640Z,1543998680.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:32:29.894Z,1543998749.894 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T08:32:29.894Z,1543998749.894 [Default:CheckIn:C.Wait] Stopped 2018-12-05T08:32:29.894Z,1543998749.894 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T08:32:29.894Z,1543998749.894 [Default:CheckIn:D] Running Loop=1 2018-12-05T08:32:30.294Z,1543998750.294 [Default:CheckIn:D] Stopped 2018-12-05T08:32:30.294Z,1543998750.294 [Default:CheckIn:E] Running Loop=1 2018-12-05T08:32:30.694Z,1543998750.694 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2117.637891 min 2018-12-05T08:32:30.694Z,1543998750.694 [Default:CheckIn:E] Stopped 2018-12-05T08:32:30.694Z,1543998750.694 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T08:32:30.694Z,1543998750.694 [Default:CheckIn] Stopped 2018-12-05T08:32:30.695Z,1543998750.695 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T08:32:30.695Z,1543998750.695 [Default:CheckIn](INFO): Running loop #206 2018-12-05T08:32:30.695Z,1543998750.695 [Default:CheckIn] Running Loop=206 2018-12-05T08:32:30.695Z,1543998750.695 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T08:32:30.695Z,1543998750.695 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T08:32:31.459Z,1543998751.459 [NAL9602](INFO): Powering up 2018-12-05T08:32:42.660Z,1543998762.660 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:33:14.612Z,1543998794.612 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T08:33:14.694Z,1543998794.694 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T08:33:14.694Z,1543998794.694 [NAL9602] Data Fault, FailCount= 5 2018-12-05T08:33:14.694Z,1543998794.694 [NAL9602](ERROR): Data Fault 2018-12-05T08:33:14.754Z,1543998794.754 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T08:33:14.754Z,1543998794.754 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T08:33:15.015Z,1543998795.015 [NAL9602](INFO): Powering down 2018-12-05T08:33:15.067Z,1543998795.067 [CBIT](INFO): Critical error at 20181205T083314 2018-12-05T08:33:20.642Z,1543998800.642 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:33:20.642Z,1543998800.642 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-05T08:33:20.642Z,1543998800.642 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:33:20.644Z,1543998800.644 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:33:20.644Z,1543998800.644 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-05T08:33:20.644Z,1543998800.644 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:33:20.658Z,1543998800.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:33:20.658Z,1543998800.658 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:33:21.051Z,1543998801.051 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:33:21.051Z,1543998801.051 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-05T08:33:21.052Z,1543998801.052 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:33:21.052Z,1543998801.052 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-05T08:33:21.438Z,1543998801.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:33:21.439Z,1543998801.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:33:21.439Z,1543998801.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:33:21.440Z,1543998801.440 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:33:21.440Z,1543998801.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:33:21.440Z,1543998801.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:35:14.792Z,1543998914.792 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T08:35:14.792Z,1543998914.792 [NAL9602] No Fault, FailCount= 5 2018-12-05T08:35:15.147Z,1543998915.147 [NAL9602](INFO): Powering up NAL9602 2018-12-05T08:35:21.578Z,1543998921.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:35:21.578Z,1543998921.578 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-05T08:35:21.578Z,1543998921.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:35:21.580Z,1543998921.580 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:35:21.580Z,1543998921.580 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-05T08:35:21.581Z,1543998921.581 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:35:21.594Z,1543998921.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:35:21.594Z,1543998921.594 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:35:21.983Z,1543998921.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:35:21.984Z,1543998921.984 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-05T08:35:21.984Z,1543998921.984 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:35:21.984Z,1543998921.984 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-05T08:35:22.378Z,1543998922.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:35:22.378Z,1543998922.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:35:22.379Z,1543998922.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:35:22.379Z,1543998922.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:35:22.380Z,1543998922.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:35:22.380Z,1543998922.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:35:26.347Z,1543998926.347 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:35:27.145Z,1543998927.145 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T08:35:27.145Z,1543998927.145 [NAL9602] Data Fault, FailCount= 1 2018-12-05T08:35:27.146Z,1543998927.146 [NAL9602](ERROR): Data Fault 2018-12-05T08:35:27.202Z,1543998927.202 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T08:35:27.548Z,1543998927.548 [NAL9602](INFO): Powering down 2018-12-05T08:35:28.388Z,1543998928.388 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T08:35:28.388Z,1543998928.388 [NAL9602] No Fault, FailCount= 1 2018-12-05T08:35:57.895Z,1543998957.895 [NAL9602](INFO): Powering up NAL9602 2018-12-05T08:36:09.096Z,1543998969.096 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:37:11.939Z,1543999031.939 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T08:37:11.939Z,1543999031.939 [DropWeight] No Fault, FailCount= 1 2018-12-05T08:37:22.712Z,1543999042.712 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:37:22.712Z,1543999042.712 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-05T08:37:22.712Z,1543999042.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:37:22.714Z,1543999042.714 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:37:22.714Z,1543999042.714 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-05T08:37:22.714Z,1543999042.714 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:37:22.727Z,1543999042.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:37:22.728Z,1543999042.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:37:23.129Z,1543999043.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:37:23.129Z,1543999043.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-05T08:37:23.130Z,1543999043.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:37:23.130Z,1543999043.130 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-05T08:37:23.498Z,1543999043.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:37:23.498Z,1543999043.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:37:23.499Z,1543999043.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:37:23.499Z,1543999043.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:37:23.500Z,1543999043.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:37:23.500Z,1543999043.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:37:31.419Z,1543999051.419 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T08:32:30.7Z 2018-12-05T08:37:31.419Z,1543999051.419 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T08:37:31.419Z,1543999051.419 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T08:37:36.409Z,1543999056.409 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0615.lzma 2018-12-05T08:37:37.592Z,1543999057.592 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0615.lzma.bak 2018-12-05T08:37:37.592Z,1543999057.592 [DataOverHttps](INFO): SBD MOMSN=8967926 2018-12-05T08:37:47.013Z,1543999067.013 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T08:37:47.082Z,1543999067.082 [DataOverHttps](INFO): Sending 354 bytes from file Logs/20181203T211451/Express0616.lzma 2018-12-05T08:37:47.881Z,1543999067.881 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0616.lzma.bak 2018-12-05T08:37:47.881Z,1543999067.881 [DataOverHttps](INFO): SBD MOMSN=8967929 2018-12-05T08:37:49.276Z,1543999069.276 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T08:37:49.276Z,1543999069.276 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T08:37:49.276Z,1543999069.276 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T08:38:17.332Z,1543999097.332 [NAL9602](INFO): Powering down 2018-12-05T08:39:23.742Z,1543999163.742 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:39:23.743Z,1543999163.743 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-05T08:39:23.743Z,1543999163.743 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:39:23.745Z,1543999163.745 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:39:23.745Z,1543999163.745 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-05T08:39:23.745Z,1543999163.745 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:39:23.803Z,1543999163.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:39:23.803Z,1543999163.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:39:24.150Z,1543999164.150 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:39:24.150Z,1543999164.150 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-05T08:39:24.151Z,1543999164.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:39:24.151Z,1543999164.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-05T08:39:24.534Z,1543999164.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:39:24.535Z,1543999164.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:39:24.535Z,1543999164.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:39:24.536Z,1543999164.536 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:39:24.536Z,1543999164.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:39:24.536Z,1543999164.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:41:24.658Z,1543999284.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:41:24.658Z,1543999284.658 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-05T08:41:24.658Z,1543999284.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:41:24.661Z,1543999284.661 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:41:24.661Z,1543999284.661 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-05T08:41:24.661Z,1543999284.661 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:41:24.674Z,1543999284.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:41:24.674Z,1543999284.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:41:25.077Z,1543999285.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:41:25.077Z,1543999285.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-05T08:41:25.078Z,1543999285.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:41:25.078Z,1543999285.078 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-05T08:41:25.466Z,1543999285.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:41:25.467Z,1543999285.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:41:25.467Z,1543999285.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:41:25.468Z,1543999285.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:41:25.468Z,1543999285.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:41:25.468Z,1543999285.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:42:49.403Z,1543999369.403 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T08:42:49.403Z,1543999369.403 [Default:CheckIn:C.Wait] Stopped 2018-12-05T08:42:49.403Z,1543999369.403 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T08:42:49.403Z,1543999369.403 [Default:CheckIn:D] Running Loop=1 2018-12-05T08:42:49.804Z,1543999369.804 [Default:CheckIn:D] Stopped 2018-12-05T08:42:49.804Z,1543999369.804 [Default:CheckIn:E] Running Loop=1 2018-12-05T08:42:50.210Z,1543999370.210 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2127.963021 min 2018-12-05T08:42:50.210Z,1543999370.210 [Default:CheckIn:E] Stopped 2018-12-05T08:42:50.210Z,1543999370.210 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T08:42:50.211Z,1543999370.211 [Default:CheckIn] Stopped 2018-12-05T08:42:50.211Z,1543999370.211 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T08:42:50.211Z,1543999370.211 [Default:CheckIn](INFO): Running loop #207 2018-12-05T08:42:50.211Z,1543999370.211 [Default:CheckIn] Running Loop=207 2018-12-05T08:42:50.211Z,1543999370.211 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T08:42:50.211Z,1543999370.211 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T08:42:50.975Z,1543999370.975 [NAL9602](INFO): Powering up 2018-12-05T08:43:02.176Z,1543999382.176 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:43:25.522Z,1543999405.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:43:25.522Z,1543999405.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-05T08:43:25.523Z,1543999405.523 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:43:25.525Z,1543999405.525 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:43:25.525Z,1543999405.525 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-05T08:43:25.525Z,1543999405.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:43:25.571Z,1543999405.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:43:25.571Z,1543999405.571 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:43:25.956Z,1543999405.956 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:43:25.956Z,1543999405.956 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-05T08:43:25.956Z,1543999405.956 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:43:25.956Z,1543999405.956 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-05T08:43:26.322Z,1543999406.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:43:26.322Z,1543999406.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:43:26.323Z,1543999406.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:43:26.323Z,1543999406.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:43:26.324Z,1543999406.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:43:26.324Z,1543999406.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:43:33.892Z,1543999413.892 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T08:43:33.974Z,1543999413.974 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T08:43:33.974Z,1543999413.974 [NAL9602] Data Fault, FailCount= 2 2018-12-05T08:43:33.974Z,1543999413.974 [NAL9602](ERROR): Data Fault 2018-12-05T08:43:34.033Z,1543999414.033 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T08:43:34.292Z,1543999414.292 [NAL9602](INFO): Powering down 2018-12-05T08:43:35.139Z,1543999415.139 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T08:43:35.139Z,1543999415.139 [NAL9602] No Fault, FailCount= 2 2018-12-05T08:44:04.304Z,1543999444.304 [NAL9602](INFO): Powering up NAL9602 2018-12-05T08:44:15.508Z,1543999455.508 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:45:26.702Z,1543999526.702 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:45:26.703Z,1543999526.703 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-05T08:45:26.703Z,1543999526.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:45:26.705Z,1543999526.705 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:45:26.705Z,1543999526.705 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-05T08:45:26.705Z,1543999526.705 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:45:26.751Z,1543999526.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:45:26.751Z,1543999526.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:45:27.114Z,1543999527.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:45:27.114Z,1543999527.114 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-05T08:45:27.146Z,1543999527.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:45:27.147Z,1543999527.147 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-05T08:45:27.526Z,1543999527.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:45:27.527Z,1543999527.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:45:27.527Z,1543999527.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:45:27.528Z,1543999527.528 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:45:27.528Z,1543999527.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:45:27.528Z,1543999527.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:47:27.662Z,1543999647.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:47:27.662Z,1543999647.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-05T08:47:27.662Z,1543999647.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:47:27.664Z,1543999647.664 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:47:27.664Z,1543999647.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-05T08:47:27.665Z,1543999647.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:47:27.678Z,1543999647.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:47:27.678Z,1543999647.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:47:28.082Z,1543999648.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:47:28.082Z,1543999648.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-05T08:47:28.083Z,1543999648.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:47:28.083Z,1543999648.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-05T08:47:28.462Z,1543999648.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:47:28.463Z,1543999648.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:47:28.463Z,1543999648.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:47:28.464Z,1543999648.464 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:47:28.464Z,1543999648.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:47:28.464Z,1543999648.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:47:51.571Z,1543999671.571 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T08:42:50.2Z 2018-12-05T08:47:51.571Z,1543999671.571 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T08:47:51.571Z,1543999671.571 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T08:47:56.532Z,1543999676.532 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0618.lzma 2018-12-05T08:47:57.430Z,1543999677.430 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0618.lzma.bak 2018-12-05T08:47:57.430Z,1543999677.430 [DataOverHttps](INFO): SBD MOMSN=8967954 2018-12-05T08:48:06.660Z,1543999686.660 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T08:48:06.740Z,1543999686.740 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20181203T211451/Express0619.lzma 2018-12-05T08:48:07.508Z,1543999687.508 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0619.lzma.bak 2018-12-05T08:48:07.508Z,1543999687.508 [DataOverHttps](INFO): SBD MOMSN=8967956 2018-12-05T08:48:08.877Z,1543999688.877 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T08:48:08.877Z,1543999688.877 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T08:48:08.878Z,1543999688.878 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T08:48:36.852Z,1543999716.852 [NAL9602](INFO): Powering down 2018-12-05T08:49:28.619Z,1543999768.619 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:49:28.619Z,1543999768.619 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-05T08:49:28.619Z,1543999768.619 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:49:28.621Z,1543999768.621 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:49:28.621Z,1543999768.621 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-05T08:49:28.621Z,1543999768.621 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:49:28.634Z,1543999768.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:49:28.635Z,1543999768.635 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:49:29.037Z,1543999769.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:49:29.037Z,1543999769.037 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-05T08:49:29.038Z,1543999769.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:49:29.038Z,1543999769.038 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-05T08:49:29.426Z,1543999769.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:49:29.426Z,1543999769.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:49:29.427Z,1543999769.427 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:49:29.427Z,1543999769.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:49:29.427Z,1543999769.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:49:29.428Z,1543999769.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:51:29.794Z,1543999889.794 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:51:29.812Z,1543999889.812 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-05T08:51:29.812Z,1543999889.812 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:51:29.815Z,1543999889.815 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:51:29.815Z,1543999889.815 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-05T08:51:29.815Z,1543999889.815 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:51:29.828Z,1543999889.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:51:29.828Z,1543999889.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:51:30.226Z,1543999890.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:51:30.226Z,1543999890.226 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-05T08:51:30.227Z,1543999890.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:51:30.227Z,1543999890.227 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-05T08:51:30.605Z,1543999890.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:51:30.605Z,1543999890.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:51:30.605Z,1543999890.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:51:30.606Z,1543999890.606 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:51:30.607Z,1543999890.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:51:30.607Z,1543999890.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:53:09.106Z,1543999989.106 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T08:53:09.106Z,1543999989.106 [Default:CheckIn:C.Wait] Stopped 2018-12-05T08:53:09.106Z,1543999989.106 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T08:53:09.106Z,1543999989.106 [Default:CheckIn:D] Running Loop=1 2018-12-05T08:53:09.508Z,1543999989.508 [Default:CheckIn:D] Stopped 2018-12-05T08:53:09.508Z,1543999989.508 [Default:CheckIn:E] Running Loop=1 2018-12-05T08:53:09.913Z,1543999989.913 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2138.291406 min 2018-12-05T08:53:09.913Z,1543999989.913 [Default:CheckIn:E] Stopped 2018-12-05T08:53:09.913Z,1543999989.913 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T08:53:09.913Z,1543999989.913 [Default:CheckIn] Stopped 2018-12-05T08:53:09.913Z,1543999989.913 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T08:53:09.913Z,1543999989.913 [Default:CheckIn](INFO): Running loop #208 2018-12-05T08:53:09.914Z,1543999989.914 [Default:CheckIn] Running Loop=208 2018-12-05T08:53:09.914Z,1543999989.914 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T08:53:09.914Z,1543999989.914 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T08:53:10.679Z,1543999990.679 [NAL9602](INFO): Powering up 2018-12-05T08:53:21.880Z,1544000001.880 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:53:22.678Z,1544000002.678 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T08:53:22.678Z,1544000002.678 [NAL9602] Data Fault, FailCount= 3 2018-12-05T08:53:22.678Z,1544000002.678 [NAL9602](ERROR): Data Fault 2018-12-05T08:53:22.748Z,1544000002.748 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T08:53:23.080Z,1544000003.080 [NAL9602](INFO): Powering down 2018-12-05T08:53:23.928Z,1544000003.928 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T08:53:23.928Z,1544000003.928 [NAL9602] No Fault, FailCount= 3 2018-12-05T08:53:30.711Z,1544000010.711 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:53:30.711Z,1544000010.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-05T08:53:30.711Z,1544000010.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:53:30.713Z,1544000010.713 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:53:30.713Z,1544000010.713 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-05T08:53:30.713Z,1544000010.713 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:53:30.727Z,1544000010.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:53:30.727Z,1544000010.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:53:31.121Z,1544000011.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:53:31.121Z,1544000011.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-05T08:53:31.121Z,1544000011.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:53:31.122Z,1544000011.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-05T08:53:31.514Z,1544000011.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:53:31.515Z,1544000011.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:53:31.515Z,1544000011.515 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:53:31.516Z,1544000011.516 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:53:31.516Z,1544000011.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:53:31.517Z,1544000011.517 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:53:53.082Z,1544000033.082 [NAL9602](INFO): Powering up NAL9602 2018-12-05T08:54:05.032Z,1544000045.032 [NAL9602](INFO): NAL9602 initialized 2018-12-05T08:55:31.576Z,1544000131.576 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:55:31.576Z,1544000131.576 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-05T08:55:31.576Z,1544000131.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:55:31.578Z,1544000131.578 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:55:31.578Z,1544000131.578 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-05T08:55:31.578Z,1544000131.578 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:55:31.591Z,1544000131.591 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:55:31.592Z,1544000131.592 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:55:32.007Z,1544000132.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:55:32.007Z,1544000132.007 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-05T08:55:32.008Z,1544000132.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:55:32.008Z,1544000132.008 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-05T08:55:32.378Z,1544000132.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:55:32.378Z,1544000132.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:55:32.379Z,1544000132.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:55:32.379Z,1544000132.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:55:32.379Z,1544000132.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:55:32.380Z,1544000132.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:57:32.773Z,1544000252.773 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:57:32.773Z,1544000252.773 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-05T08:57:32.773Z,1544000252.773 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:57:32.776Z,1544000252.776 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:57:32.776Z,1544000252.776 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-05T08:57:32.776Z,1544000252.776 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:57:32.809Z,1544000252.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:57:32.810Z,1544000252.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:57:35.898Z,1544000255.898 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:57:35.898Z,1544000255.898 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-05T08:57:35.899Z,1544000255.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:57:35.899Z,1544000255.899 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-05T08:57:35.982Z,1544000255.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:57:35.983Z,1544000255.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:57:35.983Z,1544000255.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:57:35.983Z,1544000255.983 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:57:35.984Z,1544000255.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:57:35.984Z,1544000255.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:58:11.211Z,1544000291.211 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T08:53:09.9Z 2018-12-05T08:58:11.211Z,1544000291.211 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T08:58:11.211Z,1544000291.211 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T08:58:16.254Z,1544000296.254 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0621.lzma 2018-12-05T08:58:17.050Z,1544000297.050 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0621.lzma.bak 2018-12-05T08:58:17.050Z,1544000297.050 [DataOverHttps](INFO): SBD MOMSN=8967979 2018-12-05T08:58:26.656Z,1544000306.656 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0622.lzma 2018-12-05T08:58:27.449Z,1544000307.449 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0622.lzma.bak 2018-12-05T08:58:27.449Z,1544000307.449 [DataOverHttps](INFO): SBD MOMSN=8967981 2018-12-05T08:58:28.803Z,1544000308.803 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T08:58:28.803Z,1544000308.803 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T08:58:28.803Z,1544000308.803 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T08:59:08.633Z,1544000348.633 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T08:59:36.255Z,1544000376.255 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:59:36.255Z,1544000376.255 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-05T08:59:36.256Z,1544000376.256 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T08:59:36.258Z,1544000376.258 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T08:59:36.258Z,1544000376.258 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-05T08:59:36.258Z,1544000376.258 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T08:59:36.271Z,1544000376.271 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T08:59:36.271Z,1544000376.271 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T08:59:36.677Z,1544000376.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T08:59:36.677Z,1544000376.677 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-05T08:59:36.678Z,1544000376.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T08:59:36.678Z,1544000376.678 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-05T08:59:37.066Z,1544000377.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T08:59:37.066Z,1544000377.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:59:37.067Z,1544000377.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:59:37.067Z,1544000377.067 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T08:59:37.067Z,1544000377.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T08:59:37.068Z,1544000377.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T08:59:39.432Z,1544000379.432 [NAL9602](INFO): Powering down 2018-12-05T09:01:37.158Z,1544000497.158 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:01:37.158Z,1544000497.158 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-05T09:01:37.158Z,1544000497.158 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:01:37.160Z,1544000497.160 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:01:37.160Z,1544000497.160 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-05T09:01:37.161Z,1544000497.161 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:01:37.174Z,1544000497.174 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:01:37.174Z,1544000497.174 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:01:37.577Z,1544000497.577 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:01:37.577Z,1544000497.577 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-05T09:01:37.578Z,1544000497.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:01:37.578Z,1544000497.578 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-05T09:01:37.957Z,1544000497.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:01:37.958Z,1544000497.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:01:37.958Z,1544000497.958 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:01:37.959Z,1544000497.959 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:01:37.959Z,1544000497.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:01:37.959Z,1544000497.959 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:03:29.074Z,1544000609.074 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T09:03:29.074Z,1544000609.074 [Default:CheckIn:C.Wait] Stopped 2018-12-05T09:03:29.074Z,1544000609.074 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T09:03:29.074Z,1544000609.074 [Default:CheckIn:D] Running Loop=1 2018-12-05T09:03:29.470Z,1544000609.470 [Default:CheckIn:D] Stopped 2018-12-05T09:03:29.470Z,1544000609.470 [Default:CheckIn:E] Running Loop=1 2018-12-05T09:03:29.874Z,1544000609.874 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2148.624089 min 2018-12-05T09:03:29.874Z,1544000609.874 [Default:CheckIn:E] Stopped 2018-12-05T09:03:29.875Z,1544000609.875 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T09:03:29.875Z,1544000609.875 [Default:CheckIn] Stopped 2018-12-05T09:03:29.875Z,1544000609.875 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T09:03:29.875Z,1544000609.875 [Default:CheckIn](INFO): Running loop #209 2018-12-05T09:03:29.875Z,1544000609.875 [Default:CheckIn] Running Loop=209 2018-12-05T09:03:29.875Z,1544000609.875 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T09:03:29.875Z,1544000609.875 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T09:03:30.639Z,1544000610.639 [NAL9602](INFO): Powering up 2018-12-05T09:03:38.258Z,1544000618.258 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:03:38.258Z,1544000618.258 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-05T09:03:38.273Z,1544000618.273 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:03:38.282Z,1544000618.282 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:03:38.282Z,1544000618.282 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-05T09:03:38.282Z,1544000618.282 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:03:38.324Z,1544000618.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:03:38.324Z,1544000618.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:03:38.688Z,1544000618.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:03:38.688Z,1544000618.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-05T09:03:38.688Z,1544000618.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:03:38.688Z,1544000618.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-05T09:03:39.073Z,1544000619.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:03:39.073Z,1544000619.073 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:03:39.073Z,1544000619.073 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:03:39.074Z,1544000619.074 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:03:39.074Z,1544000619.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:03:39.075Z,1544000619.075 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:03:41.840Z,1544000621.840 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:04:13.556Z,1544000653.556 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T09:04:13.638Z,1544000653.638 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T09:04:13.638Z,1544000653.638 [NAL9602] Data Fault, FailCount= 4 2018-12-05T09:04:13.638Z,1544000653.638 [NAL9602](ERROR): Data Fault 2018-12-05T09:04:13.698Z,1544000653.698 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T09:04:13.956Z,1544000653.956 [NAL9602](INFO): Powering down 2018-12-05T09:04:14.805Z,1544000654.805 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T09:04:14.805Z,1544000654.805 [NAL9602] No Fault, FailCount= 4 2018-12-05T09:04:43.968Z,1544000683.968 [NAL9602](INFO): Powering up NAL9602 2018-12-05T09:04:55.168Z,1544000695.168 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:04:55.968Z,1544000695.968 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T09:04:55.968Z,1544000695.968 [NAL9602] Data Fault, FailCount= 5 2018-12-05T09:04:55.968Z,1544000695.968 [NAL9602](ERROR): Data Fault 2018-12-05T09:04:56.037Z,1544000696.037 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T09:04:56.038Z,1544000696.038 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T09:04:56.368Z,1544000696.368 [NAL9602](INFO): Powering down 2018-12-05T09:04:56.401Z,1544000696.401 [CBIT](INFO): Critical error at 20181205T090456 2018-12-05T09:05:39.238Z,1544000739.238 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:05:39.238Z,1544000739.238 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-05T09:05:39.238Z,1544000739.238 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:05:39.240Z,1544000739.240 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:05:39.240Z,1544000739.240 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-05T09:05:39.240Z,1544000739.240 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:05:39.253Z,1544000739.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:05:39.254Z,1544000739.254 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:05:39.661Z,1544000739.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:05:39.661Z,1544000739.661 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-05T09:05:39.662Z,1544000739.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:05:39.662Z,1544000739.662 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-05T09:05:40.048Z,1544000740.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:05:40.049Z,1544000740.049 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:05:40.049Z,1544000740.049 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:05:40.049Z,1544000740.049 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:05:40.050Z,1544000740.050 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:05:40.050Z,1544000740.050 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:06:56.121Z,1544000816.121 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T09:06:56.121Z,1544000816.121 [NAL9602] No Fault, FailCount= 5 2018-12-05T09:06:56.476Z,1544000816.476 [NAL9602](INFO): Powering up NAL9602 2018-12-05T09:07:07.676Z,1544000827.676 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:07:13.275Z,1544000833.275 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T09:07:13.275Z,1544000833.275 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T09:07:13.275Z,1544000833.275 [DropWeight](ERROR): Hardware Fault 2018-12-05T09:07:13.343Z,1544000833.343 [CBIT](INFO): Critical error at 20181205T090713 2018-12-05T09:07:13.346Z,1544000833.346 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T09:07:13.351Z,1544000833.351 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T09:07:13.718Z,1544000833.718 [CBIT](INFO): Critical error at 20181205T090713 2018-12-05T09:07:40.128Z,1544000860.128 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:07:40.128Z,1544000860.128 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-05T09:07:40.128Z,1544000860.128 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:07:40.130Z,1544000860.130 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:07:40.130Z,1544000860.130 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-05T09:07:40.130Z,1544000860.130 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:07:40.144Z,1544000860.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:07:40.144Z,1544000860.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:07:40.542Z,1544000860.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:07:40.542Z,1544000860.542 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-05T09:07:40.543Z,1544000860.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:07:40.543Z,1544000860.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-05T09:07:40.929Z,1544000860.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:07:40.930Z,1544000860.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:07:40.930Z,1544000860.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:07:40.930Z,1544000860.930 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:07:40.931Z,1544000860.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:07:40.931Z,1544000860.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:08:31.391Z,1544000911.391 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T09:03:29.9Z 2018-12-05T09:08:31.392Z,1544000911.392 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T09:08:31.392Z,1544000911.392 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T09:08:36.423Z,1544000916.423 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181203T211451/Courier0624.lzma 2018-12-05T09:08:37.202Z,1544000917.202 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0624.lzma.bak 2018-12-05T09:08:37.202Z,1544000917.202 [DataOverHttps](INFO): SBD MOMSN=8968005 2018-12-05T09:08:46.778Z,1544000926.778 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T09:08:46.955Z,1544000926.955 [DataOverHttps](INFO): Sending 344 bytes from file Logs/20181203T211451/Express0625.lzma 2018-12-05T09:08:47.753Z,1544000927.753 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0625.lzma.bak 2018-12-05T09:08:47.753Z,1544000927.753 [DataOverHttps](INFO): SBD MOMSN=8968010 2018-12-05T09:08:49.108Z,1544000929.108 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T09:08:49.108Z,1544000929.108 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T09:08:49.108Z,1544000929.108 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T09:09:17.141Z,1544000957.141 [NAL9602](INFO): Powering down 2018-12-05T09:09:41.141Z,1544000981.141 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:09:41.141Z,1544000981.141 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-05T09:09:41.141Z,1544000981.141 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:09:41.144Z,1544000981.144 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:09:41.144Z,1544000981.144 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-05T09:09:41.144Z,1544000981.144 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:09:41.189Z,1544000981.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:09:41.189Z,1544000981.189 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:09:41.447Z,1544000981.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:09:41.447Z,1544000981.447 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-05T09:09:41.448Z,1544000981.448 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:09:41.448Z,1544000981.448 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-05T09:09:41.839Z,1544000981.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:09:41.839Z,1544000981.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:09:41.839Z,1544000981.839 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:09:41.840Z,1544000981.840 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:09:41.840Z,1544000981.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:09:41.841Z,1544000981.841 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:11:03.118Z,1544001063.118 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T09:11:41.864Z,1544001101.864 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:11:41.864Z,1544001101.864 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-05T09:11:41.864Z,1544001101.864 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:11:41.866Z,1544001101.866 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:11:41.867Z,1544001101.867 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-05T09:11:41.867Z,1544001101.867 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:11:41.880Z,1544001101.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:11:41.880Z,1544001101.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:11:42.282Z,1544001102.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:11:42.282Z,1544001102.282 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-05T09:11:42.283Z,1544001102.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:11:42.283Z,1544001102.283 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-05T09:11:42.663Z,1544001102.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:11:42.663Z,1544001102.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:11:42.663Z,1544001102.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:11:42.664Z,1544001102.664 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:11:42.664Z,1544001102.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:11:42.664Z,1544001102.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:13:42.689Z,1544001222.689 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:13:42.689Z,1544001222.689 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-05T09:13:42.689Z,1544001222.689 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:13:42.691Z,1544001222.691 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:13:42.692Z,1544001222.692 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-05T09:13:42.692Z,1544001222.692 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:13:42.705Z,1544001222.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:13:42.705Z,1544001222.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:13:43.110Z,1544001223.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:13:43.110Z,1544001223.110 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-05T09:13:43.111Z,1544001223.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:13:43.111Z,1544001223.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-05T09:13:43.498Z,1544001223.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:13:43.498Z,1544001223.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:13:43.499Z,1544001223.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:13:43.499Z,1544001223.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:13:43.499Z,1544001223.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:13:43.500Z,1544001223.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:13:49.498Z,1544001229.498 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T09:13:49.498Z,1544001229.498 [Default:CheckIn:C.Wait] Stopped 2018-12-05T09:13:49.498Z,1544001229.498 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T09:13:49.498Z,1544001229.498 [Default:CheckIn:D] Running Loop=1 2018-12-05T09:13:49.895Z,1544001229.895 [Default:CheckIn:D] Stopped 2018-12-05T09:13:49.895Z,1544001229.895 [Default:CheckIn:E] Running Loop=1 2018-12-05T09:13:50.294Z,1544001230.294 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2158.964583 min 2018-12-05T09:13:50.294Z,1544001230.294 [Default:CheckIn:E] Stopped 2018-12-05T09:13:50.294Z,1544001230.294 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T09:13:50.294Z,1544001230.294 [Default:CheckIn] Stopped 2018-12-05T09:13:50.295Z,1544001230.295 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T09:13:50.295Z,1544001230.295 [Default:CheckIn](INFO): Running loop #210 2018-12-05T09:13:50.295Z,1544001230.295 [Default:CheckIn] Running Loop=210 2018-12-05T09:13:50.295Z,1544001230.295 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T09:13:50.295Z,1544001230.295 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T09:13:51.067Z,1544001231.067 [NAL9602](INFO): Powering up 2018-12-05T09:14:02.268Z,1544001242.268 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:14:33.883Z,1544001273.883 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T09:14:33.962Z,1544001273.962 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T09:14:33.962Z,1544001273.962 [NAL9602] Data Fault, FailCount= 1 2018-12-05T09:14:33.962Z,1544001273.962 [NAL9602](ERROR): Data Fault 2018-12-05T09:14:34.004Z,1544001274.004 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T09:14:34.283Z,1544001274.283 [NAL9602](INFO): Powering down 2018-12-05T09:14:35.144Z,1544001275.144 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T09:14:35.145Z,1544001275.145 [NAL9602] No Fault, FailCount= 1 2018-12-05T09:15:04.659Z,1544001304.659 [NAL9602](INFO): Powering up NAL9602 2018-12-05T09:15:15.859Z,1544001315.859 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:15:43.853Z,1544001343.853 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:15:43.853Z,1544001343.853 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-05T09:15:43.853Z,1544001343.853 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:15:43.856Z,1544001343.856 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:15:43.856Z,1544001343.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-05T09:15:43.856Z,1544001343.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:15:43.869Z,1544001343.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:15:43.870Z,1544001343.870 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:15:44.269Z,1544001344.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:15:44.269Z,1544001344.269 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-05T09:15:44.270Z,1544001344.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:15:44.270Z,1544001344.270 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-05T09:15:44.654Z,1544001344.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:15:44.654Z,1544001344.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:15:44.655Z,1544001344.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:15:44.655Z,1544001344.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:15:44.656Z,1544001344.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:15:44.656Z,1544001344.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:17:44.810Z,1544001464.810 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:17:44.810Z,1544001464.810 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-05T09:17:44.810Z,1544001464.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:17:44.812Z,1544001464.812 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:17:44.812Z,1544001464.812 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-05T09:17:44.812Z,1544001464.812 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:17:44.826Z,1544001464.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:17:44.826Z,1544001464.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:17:45.227Z,1544001465.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:17:45.227Z,1544001465.227 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-05T09:17:45.228Z,1544001465.228 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:17:45.228Z,1544001465.228 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-05T09:17:45.598Z,1544001465.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:17:45.598Z,1544001465.598 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:17:45.599Z,1544001465.599 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:17:45.599Z,1544001465.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:17:45.600Z,1544001465.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:17:45.600Z,1544001465.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:18:51.258Z,1544001531.258 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T09:13:50.3Z 2018-12-05T09:18:51.258Z,1544001531.258 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T09:18:51.259Z,1544001531.259 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T09:18:56.353Z,1544001536.353 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0627.lzma 2018-12-05T09:18:57.133Z,1544001537.133 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0627.lzma.bak 2018-12-05T09:18:57.133Z,1544001537.133 [DataOverHttps](INFO): SBD MOMSN=8968033 2018-12-05T09:19:06.372Z,1544001546.372 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T09:19:06.430Z,1544001546.430 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0628.lzma 2018-12-05T09:19:07.229Z,1544001547.229 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0628.lzma.bak 2018-12-05T09:19:07.229Z,1544001547.229 [DataOverHttps](INFO): SBD MOMSN=8968035 2018-12-05T09:19:08.609Z,1544001548.609 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T09:19:08.609Z,1544001548.609 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T09:19:08.609Z,1544001548.609 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T09:19:36.673Z,1544001576.673 [NAL9602](INFO): Powering down 2018-12-05T09:19:47.402Z,1544001587.402 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:19:47.402Z,1544001587.402 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-05T09:19:47.402Z,1544001587.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:19:47.404Z,1544001587.404 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:19:47.404Z,1544001587.404 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-05T09:19:47.404Z,1544001587.404 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:19:47.418Z,1544001587.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:19:47.418Z,1544001587.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:19:47.555Z,1544001587.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:19:47.555Z,1544001587.555 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-05T09:19:47.556Z,1544001587.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:19:47.556Z,1544001587.556 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-05T09:19:47.856Z,1544001587.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:19:47.857Z,1544001587.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:19:47.857Z,1544001587.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:19:47.858Z,1544001587.858 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:19:47.858Z,1544001587.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:19:47.858Z,1544001587.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:21:48.134Z,1544001708.134 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:21:48.134Z,1544001708.134 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-05T09:21:48.134Z,1544001708.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:21:48.136Z,1544001708.136 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:21:48.136Z,1544001708.136 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-05T09:21:48.137Z,1544001708.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:21:48.150Z,1544001708.150 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:21:48.150Z,1544001708.150 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:21:48.542Z,1544001708.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:21:48.542Z,1544001708.542 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-05T09:21:48.542Z,1544001708.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:21:48.542Z,1544001708.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-05T09:21:48.935Z,1544001708.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:21:48.936Z,1544001708.936 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:21:48.936Z,1544001708.936 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:21:48.936Z,1544001708.936 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:21:48.937Z,1544001708.937 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:21:48.937Z,1544001708.937 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:22:13.369Z,1544001733.369 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T09:22:13.369Z,1544001733.369 [DropWeight] No Fault, FailCount= 1 2018-12-05T09:23:48.976Z,1544001828.976 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:23:48.976Z,1544001828.976 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-05T09:23:48.977Z,1544001828.977 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:23:48.991Z,1544001828.991 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:23:48.991Z,1544001828.991 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-05T09:23:48.991Z,1544001828.991 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:23:49.010Z,1544001829.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:23:49.010Z,1544001829.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:23:49.406Z,1544001829.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:23:49.406Z,1544001829.406 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-05T09:23:49.406Z,1544001829.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:23:49.406Z,1544001829.406 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-05T09:23:49.776Z,1544001829.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:23:49.777Z,1544001829.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:23:49.777Z,1544001829.777 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:23:49.777Z,1544001829.777 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:23:49.778Z,1544001829.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:23:49.778Z,1544001829.778 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:24:08.922Z,1544001848.922 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T09:24:08.934Z,1544001848.934 [Default:CheckIn:C.Wait] Stopped 2018-12-05T09:24:08.934Z,1544001848.934 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T09:24:08.934Z,1544001848.934 [Default:CheckIn:D] Running Loop=1 2018-12-05T09:24:09.342Z,1544001849.342 [Default:CheckIn:D] Stopped 2018-12-05T09:24:09.342Z,1544001849.342 [Default:CheckIn:E] Running Loop=1 2018-12-05T09:24:09.721Z,1544001849.721 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2169.288672 min 2018-12-05T09:24:09.722Z,1544001849.722 [Default:CheckIn:E] Stopped 2018-12-05T09:24:09.722Z,1544001849.722 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T09:24:09.722Z,1544001849.722 [Default:CheckIn] Stopped 2018-12-05T09:24:09.722Z,1544001849.722 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T09:24:09.722Z,1544001849.722 [Default:CheckIn](INFO): Running loop #211 2018-12-05T09:24:09.722Z,1544001849.722 [Default:CheckIn] Running Loop=211 2018-12-05T09:24:09.722Z,1544001849.722 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T09:24:09.723Z,1544001849.723 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T09:24:10.499Z,1544001850.499 [NAL9602](INFO): Powering up 2018-12-05T09:24:21.700Z,1544001861.700 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:24:22.500Z,1544001862.500 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T09:24:22.500Z,1544001862.500 [NAL9602] Data Fault, FailCount= 2 2018-12-05T09:24:22.500Z,1544001862.500 [NAL9602](ERROR): Data Fault 2018-12-05T09:24:22.577Z,1544001862.577 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T09:24:22.900Z,1544001862.900 [NAL9602](INFO): Powering down 2018-12-05T09:24:23.737Z,1544001863.737 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T09:24:23.737Z,1544001863.737 [NAL9602] No Fault, FailCount= 2 2018-12-05T09:24:53.248Z,1544001893.248 [NAL9602](INFO): Powering up NAL9602 2018-12-05T09:25:07.252Z,1544001907.252 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:25:50.071Z,1544001950.071 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:25:50.071Z,1544001950.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-05T09:25:50.071Z,1544001950.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:25:50.073Z,1544001950.073 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:25:50.073Z,1544001950.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-05T09:25:50.073Z,1544001950.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:25:50.087Z,1544001950.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:25:50.087Z,1544001950.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:25:50.483Z,1544001950.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:25:50.483Z,1544001950.483 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-05T09:25:50.484Z,1544001950.484 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:25:50.484Z,1544001950.484 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-05T09:25:50.874Z,1544001950.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:25:50.874Z,1544001950.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:25:50.875Z,1544001950.875 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:25:50.875Z,1544001950.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:25:50.876Z,1544001950.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:25:50.876Z,1544001950.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:27:50.894Z,1544002070.894 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:27:50.895Z,1544002070.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-05T09:27:50.895Z,1544002070.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:27:50.899Z,1544002070.899 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:27:50.899Z,1544002070.899 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-05T09:27:50.899Z,1544002070.899 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:27:50.925Z,1544002070.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:27:50.925Z,1544002070.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:27:51.327Z,1544002071.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:27:51.327Z,1544002071.327 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-05T09:27:51.327Z,1544002071.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:27:51.327Z,1544002071.327 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-05T09:27:51.695Z,1544002071.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:27:51.695Z,1544002071.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:27:51.695Z,1544002071.695 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:27:51.696Z,1544002071.696 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:27:51.696Z,1544002071.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:27:51.697Z,1544002071.697 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:29:10.543Z,1544002150.543 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T09:24:09.7Z 2018-12-05T09:29:10.543Z,1544002150.543 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T09:29:10.543Z,1544002150.543 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T09:29:15.578Z,1544002155.578 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0630.lzma 2018-12-05T09:29:16.377Z,1544002156.377 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0630.lzma.bak 2018-12-05T09:29:16.377Z,1544002156.377 [DataOverHttps](INFO): SBD MOMSN=8968057 2018-12-05T09:29:25.782Z,1544002165.782 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0631.lzma 2018-12-05T09:29:26.547Z,1544002166.547 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0631.lzma.bak 2018-12-05T09:29:26.547Z,1544002166.547 [DataOverHttps](INFO): SBD MOMSN=8968059 2018-12-05T09:29:27.961Z,1544002167.961 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T09:29:27.961Z,1544002167.961 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T09:29:27.961Z,1544002167.961 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T09:29:51.990Z,1544002191.990 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:29:51.990Z,1544002191.990 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-05T09:29:51.991Z,1544002191.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:29:51.993Z,1544002191.993 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:29:51.993Z,1544002191.993 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-05T09:29:51.993Z,1544002191.993 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:29:52.006Z,1544002192.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:29:52.006Z,1544002192.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:29:52.410Z,1544002192.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:29:52.410Z,1544002192.410 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-05T09:29:52.410Z,1544002192.410 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:29:52.410Z,1544002192.410 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-05T09:29:52.786Z,1544002192.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:29:52.791Z,1544002192.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:29:52.791Z,1544002192.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:29:52.791Z,1544002192.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:29:52.792Z,1544002192.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:29:52.792Z,1544002192.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:30:10.720Z,1544002210.720 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T09:30:41.821Z,1544002241.821 [NAL9602](INFO): Powering down 2018-12-05T09:31:52.909Z,1544002312.909 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:31:52.910Z,1544002312.910 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-05T09:31:52.910Z,1544002312.910 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:31:52.912Z,1544002312.912 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:31:52.912Z,1544002312.912 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-05T09:31:52.912Z,1544002312.912 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:31:52.925Z,1544002312.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:31:52.925Z,1544002312.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:31:53.334Z,1544002313.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:31:53.334Z,1544002313.334 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-05T09:31:53.334Z,1544002313.334 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:31:53.334Z,1544002313.334 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-05T09:31:53.709Z,1544002313.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:31:53.710Z,1544002313.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:31:53.710Z,1544002313.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:31:53.710Z,1544002313.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:31:53.711Z,1544002313.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:31:53.711Z,1544002313.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:33:53.994Z,1544002433.994 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:33:53.994Z,1544002433.994 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-05T09:33:53.994Z,1544002433.994 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:33:53.996Z,1544002433.996 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:33:53.997Z,1544002433.997 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-05T09:33:53.997Z,1544002433.997 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:33:54.010Z,1544002434.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:33:54.010Z,1544002434.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:33:54.401Z,1544002434.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:33:54.401Z,1544002434.401 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-05T09:33:54.402Z,1544002434.402 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:33:54.402Z,1544002434.402 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-05T09:33:54.794Z,1544002434.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:33:54.795Z,1544002434.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:33:54.795Z,1544002434.795 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:33:54.795Z,1544002434.795 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:33:54.796Z,1544002434.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:33:54.796Z,1544002434.796 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:34:28.121Z,1544002468.121 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T09:34:28.121Z,1544002468.121 [Default:CheckIn:C.Wait] Stopped 2018-12-05T09:34:28.121Z,1544002468.121 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T09:34:28.121Z,1544002468.121 [Default:CheckIn:D] Running Loop=1 2018-12-05T09:34:28.517Z,1544002468.517 [Default:CheckIn:D] Stopped 2018-12-05T09:34:28.517Z,1544002468.517 [Default:CheckIn:E] Running Loop=1 2018-12-05T09:34:28.922Z,1544002468.922 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2179.608203 min 2018-12-05T09:34:28.922Z,1544002468.922 [Default:CheckIn:E] Stopped 2018-12-05T09:34:28.923Z,1544002468.923 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T09:34:28.923Z,1544002468.923 [Default:CheckIn] Stopped 2018-12-05T09:34:28.923Z,1544002468.923 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T09:34:28.923Z,1544002468.923 [Default:CheckIn](INFO): Running loop #212 2018-12-05T09:34:28.923Z,1544002468.923 [Default:CheckIn] Running Loop=212 2018-12-05T09:34:28.923Z,1544002468.923 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T09:34:28.923Z,1544002468.923 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T09:34:29.681Z,1544002469.681 [NAL9602](INFO): Powering up 2018-12-05T09:34:40.484Z,1544002480.484 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:35:12.111Z,1544002512.111 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T09:35:12.194Z,1544002512.194 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T09:35:12.194Z,1544002512.194 [NAL9602] Data Fault, FailCount= 3 2018-12-05T09:35:12.194Z,1544002512.194 [NAL9602](ERROR): Data Fault 2018-12-05T09:35:12.276Z,1544002512.276 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T09:35:12.511Z,1544002512.511 [NAL9602](INFO): Powering down 2018-12-05T09:35:13.345Z,1544002513.345 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T09:35:13.345Z,1544002513.345 [NAL9602] No Fault, FailCount= 3 2018-12-05T09:35:42.533Z,1544002542.533 [NAL9602](INFO): Powering up NAL9602 2018-12-05T09:35:53.336Z,1544002553.336 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:35:54.140Z,1544002554.140 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T09:35:54.140Z,1544002554.140 [NAL9602] Data Fault, FailCount= 4 2018-12-05T09:35:54.140Z,1544002554.140 [NAL9602](ERROR): Data Fault 2018-12-05T09:35:54.211Z,1544002554.211 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T09:35:54.535Z,1544002554.535 [NAL9602](INFO): Powering down 2018-12-05T09:35:54.974Z,1544002554.974 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:35:54.975Z,1544002554.975 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-05T09:35:54.975Z,1544002554.975 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:35:54.977Z,1544002554.977 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:35:54.977Z,1544002554.977 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-05T09:35:54.977Z,1544002554.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:35:55.017Z,1544002555.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:35:55.017Z,1544002555.017 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:35:55.383Z,1544002555.383 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T09:35:55.383Z,1544002555.383 [NAL9602] No Fault, FailCount= 4 2018-12-05T09:35:55.384Z,1544002555.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:35:55.384Z,1544002555.384 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-05T09:35:55.384Z,1544002555.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:35:55.384Z,1544002555.384 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-05T09:35:55.772Z,1544002555.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:35:55.772Z,1544002555.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:35:55.773Z,1544002555.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:35:55.773Z,1544002555.773 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:35:55.774Z,1544002555.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:35:55.774Z,1544002555.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:36:24.896Z,1544002584.896 [NAL9602](INFO): Powering up NAL9602 2018-12-05T09:36:36.060Z,1544002596.060 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:37:55.781Z,1544002675.781 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:37:55.781Z,1544002675.781 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-05T09:37:55.781Z,1544002675.781 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:37:55.783Z,1544002675.783 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:37:55.783Z,1544002675.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-05T09:37:55.783Z,1544002675.783 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:37:55.817Z,1544002675.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:37:55.817Z,1544002675.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:37:56.210Z,1544002676.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:37:56.210Z,1544002676.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-05T09:37:56.211Z,1544002676.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:37:56.211Z,1544002676.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-05T09:37:56.571Z,1544002676.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:37:56.572Z,1544002676.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:37:56.572Z,1544002676.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:37:56.573Z,1544002676.573 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:37:56.573Z,1544002676.573 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:37:56.573Z,1544002676.573 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:39:30.182Z,1544002770.182 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T09:34:28.9Z 2018-12-05T09:39:30.182Z,1544002770.182 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T09:39:30.183Z,1544002770.183 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T09:39:35.102Z,1544002775.102 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0633.lzma 2018-12-05T09:39:35.901Z,1544002775.901 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0633.lzma.bak 2018-12-05T09:39:35.902Z,1544002775.902 [DataOverHttps](INFO): SBD MOMSN=8968083 2018-12-05T09:39:45.242Z,1544002785.242 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T09:39:45.314Z,1544002785.314 [DataOverHttps](INFO): Sending 347 bytes from file Logs/20181203T211451/Express0634.lzma 2018-12-05T09:39:46.089Z,1544002786.089 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0634.lzma.bak 2018-12-05T09:39:46.090Z,1544002786.090 [DataOverHttps](INFO): SBD MOMSN=8968085 2018-12-05T09:39:47.442Z,1544002787.442 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T09:39:47.442Z,1544002787.442 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T09:39:47.442Z,1544002787.442 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T09:39:56.665Z,1544002796.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:39:56.665Z,1544002796.665 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-05T09:39:56.665Z,1544002796.665 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:39:56.667Z,1544002796.667 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:39:56.667Z,1544002796.667 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-05T09:39:56.667Z,1544002796.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:39:56.680Z,1544002796.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:39:56.680Z,1544002796.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:39:57.082Z,1544002797.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:39:57.082Z,1544002797.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-05T09:39:57.082Z,1544002797.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:39:57.082Z,1544002797.082 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-05T09:39:57.465Z,1544002797.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:39:57.465Z,1544002797.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:39:57.465Z,1544002797.465 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:39:57.466Z,1544002797.466 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:39:57.466Z,1544002797.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:39:57.467Z,1544002797.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:40:15.443Z,1544002815.443 [NAL9602](INFO): Powering down 2018-12-05T09:41:57.639Z,1544002917.639 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:41:57.639Z,1544002917.639 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-05T09:41:57.639Z,1544002917.639 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:41:57.641Z,1544002917.641 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:41:57.641Z,1544002917.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-05T09:41:57.641Z,1544002917.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:41:57.654Z,1544002917.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:41:57.655Z,1544002917.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:41:58.048Z,1544002918.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:41:58.048Z,1544002918.048 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-05T09:41:58.049Z,1544002918.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:41:58.049Z,1544002918.049 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-05T09:41:58.437Z,1544002918.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:41:58.437Z,1544002918.437 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:41:58.438Z,1544002918.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:41:58.438Z,1544002918.438 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:41:58.439Z,1544002918.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:41:58.439Z,1544002918.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:43:58.493Z,1544003038.493 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:43:58.493Z,1544003038.493 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-05T09:43:58.493Z,1544003038.493 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:43:58.495Z,1544003038.495 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:43:58.495Z,1544003038.495 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-05T09:43:58.495Z,1544003038.495 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:43:58.508Z,1544003038.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:43:58.508Z,1544003038.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:43:58.909Z,1544003038.909 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:43:58.909Z,1544003038.909 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-05T09:43:58.910Z,1544003038.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:43:58.910Z,1544003038.910 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-05T09:43:59.294Z,1544003039.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:43:59.294Z,1544003039.294 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:43:59.295Z,1544003039.295 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:43:59.295Z,1544003039.295 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:43:59.295Z,1544003039.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:43:59.296Z,1544003039.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:44:47.702Z,1544003087.702 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T09:44:47.702Z,1544003087.702 [Default:CheckIn:C.Wait] Stopped 2018-12-05T09:44:47.702Z,1544003087.702 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T09:44:47.702Z,1544003087.702 [Default:CheckIn:D] Running Loop=1 2018-12-05T09:44:48.123Z,1544003088.123 [Default:CheckIn:D] Stopped 2018-12-05T09:44:48.123Z,1544003088.123 [Default:CheckIn:E] Running Loop=1 2018-12-05T09:44:48.503Z,1544003088.503 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2189.934896 min 2018-12-05T09:44:48.503Z,1544003088.503 [Default:CheckIn:E] Stopped 2018-12-05T09:44:48.503Z,1544003088.503 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T09:44:48.504Z,1544003088.504 [Default:CheckIn] Stopped 2018-12-05T09:44:48.504Z,1544003088.504 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T09:44:48.504Z,1544003088.504 [Default:CheckIn](INFO): Running loop #213 2018-12-05T09:44:48.504Z,1544003088.504 [Default:CheckIn] Running Loop=213 2018-12-05T09:44:48.504Z,1544003088.504 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T09:44:48.504Z,1544003088.504 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T09:44:49.280Z,1544003089.280 [NAL9602](INFO): Powering up 2018-12-05T09:45:00.480Z,1544003100.480 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:45:59.663Z,1544003159.663 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:45:59.663Z,1544003159.663 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-05T09:45:59.663Z,1544003159.663 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:45:59.665Z,1544003159.665 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:45:59.665Z,1544003159.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-05T09:45:59.665Z,1544003159.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:45:59.678Z,1544003159.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:45:59.679Z,1544003159.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:46:00.082Z,1544003160.082 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:46:00.082Z,1544003160.082 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-05T09:46:00.083Z,1544003160.083 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:46:00.083Z,1544003160.083 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-05T09:46:00.482Z,1544003160.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:46:00.482Z,1544003160.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:46:00.483Z,1544003160.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:46:00.483Z,1544003160.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:46:00.483Z,1544003160.483 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:46:00.484Z,1544003160.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:48:00.810Z,1544003280.810 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:48:00.810Z,1544003280.810 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-05T09:48:00.810Z,1544003280.810 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:48:00.812Z,1544003280.812 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:48:00.812Z,1544003280.812 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-05T09:48:00.813Z,1544003280.813 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:48:00.826Z,1544003280.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:48:00.826Z,1544003280.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:48:01.223Z,1544003281.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:48:01.224Z,1544003281.224 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-05T09:48:01.224Z,1544003281.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:48:01.224Z,1544003281.224 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-05T09:48:04.314Z,1544003284.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:48:04.315Z,1544003284.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:48:04.315Z,1544003284.315 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:48:04.315Z,1544003284.315 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:48:04.316Z,1544003284.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:48:04.316Z,1544003284.316 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:49:49.964Z,1544003389.964 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T09:44:48.5Z 2018-12-05T09:49:49.964Z,1544003389.964 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T09:49:49.964Z,1544003389.964 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T09:49:54.948Z,1544003394.948 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0636.lzma 2018-12-05T09:49:55.749Z,1544003395.749 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0636.lzma.bak 2018-12-05T09:49:55.749Z,1544003395.749 [DataOverHttps](INFO): SBD MOMSN=8968108 2018-12-05T09:50:05.175Z,1544003405.175 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T09:50:05.195Z,1544003405.195 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:50:05.195Z,1544003405.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-05T09:50:05.195Z,1544003405.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:50:05.197Z,1544003405.197 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:50:05.197Z,1544003405.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-05T09:50:05.197Z,1544003405.197 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:50:05.211Z,1544003405.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:50:05.211Z,1544003405.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:50:05.266Z,1544003405.266 [DataOverHttps](INFO): Sending 286 bytes from file Logs/20181203T211451/Express0637.lzma 2018-12-05T09:50:05.347Z,1544003405.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:50:05.347Z,1544003405.347 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-05T09:50:05.348Z,1544003405.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:50:05.350Z,1544003405.350 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-05T09:50:05.654Z,1544003405.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:50:05.654Z,1544003405.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:50:05.655Z,1544003405.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:50:05.655Z,1544003405.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:50:05.655Z,1544003405.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:50:05.656Z,1544003405.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:50:06.021Z,1544003406.021 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0637.lzma.bak 2018-12-05T09:50:06.021Z,1544003406.021 [DataOverHttps](INFO): SBD MOMSN=8968110 2018-12-05T09:50:07.438Z,1544003407.438 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T09:50:07.438Z,1544003407.438 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T09:50:07.442Z,1544003407.442 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T09:50:35.488Z,1544003435.488 [NAL9602](INFO): Powering down 2018-12-05T09:52:05.782Z,1544003525.782 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:52:05.782Z,1544003525.782 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-05T09:52:05.782Z,1544003525.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:52:05.795Z,1544003525.795 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:52:05.795Z,1544003525.795 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-05T09:52:05.795Z,1544003525.795 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:52:05.809Z,1544003525.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:52:05.809Z,1544003525.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:52:06.207Z,1544003526.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:52:06.207Z,1544003526.207 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-05T09:52:06.207Z,1544003526.207 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:52:06.207Z,1544003526.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-05T09:52:06.591Z,1544003526.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:52:06.591Z,1544003526.591 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:52:06.592Z,1544003526.592 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:52:06.592Z,1544003526.592 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:52:06.592Z,1544003526.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:52:06.593Z,1544003526.593 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:52:14.563Z,1544003534.563 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T09:52:14.563Z,1544003534.563 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T09:52:14.563Z,1544003534.563 [DropWeight](ERROR): Hardware Fault 2018-12-05T09:52:14.622Z,1544003534.622 [CBIT](INFO): Critical error at 20181205T095214 2018-12-05T09:52:14.625Z,1544003534.625 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T09:52:14.625Z,1544003534.625 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T09:52:15.012Z,1544003535.012 [CBIT](INFO): Critical error at 20181205T095214 2018-12-05T09:54:06.714Z,1544003646.714 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:54:06.714Z,1544003646.714 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-05T09:54:06.734Z,1544003646.734 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:54:06.747Z,1544003646.747 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:54:06.747Z,1544003646.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-05T09:54:06.747Z,1544003646.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:54:06.760Z,1544003646.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:54:06.761Z,1544003646.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:54:07.144Z,1544003647.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:54:07.144Z,1544003647.144 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-05T09:54:07.144Z,1544003647.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:54:07.144Z,1544003647.144 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-05T09:54:07.510Z,1544003647.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:54:07.511Z,1544003647.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:54:07.511Z,1544003647.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:54:07.512Z,1544003647.512 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:54:07.512Z,1544003647.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:54:07.512Z,1544003647.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:55:07.848Z,1544003707.848 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T09:55:07.848Z,1544003707.848 [Default:CheckIn:C.Wait] Stopped 2018-12-05T09:55:07.849Z,1544003707.849 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T09:55:07.849Z,1544003707.849 [Default:CheckIn:D] Running Loop=1 2018-12-05T09:55:08.258Z,1544003708.258 [Default:CheckIn:D] Stopped 2018-12-05T09:55:08.258Z,1544003708.258 [Default:CheckIn:E] Running Loop=1 2018-12-05T09:55:08.649Z,1544003708.649 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2200.270573 min 2018-12-05T09:55:08.649Z,1544003708.649 [Default:CheckIn:E] Stopped 2018-12-05T09:55:08.650Z,1544003708.650 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T09:55:08.650Z,1544003708.650 [Default:CheckIn] Stopped 2018-12-05T09:55:08.650Z,1544003708.650 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T09:55:08.650Z,1544003708.650 [Default:CheckIn](INFO): Running loop #214 2018-12-05T09:55:08.650Z,1544003708.650 [Default:CheckIn] Running Loop=214 2018-12-05T09:55:08.650Z,1544003708.650 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T09:55:08.650Z,1544003708.650 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T09:55:09.423Z,1544003709.423 [NAL9602](INFO): Powering up 2018-12-05T09:55:20.624Z,1544003720.624 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:55:21.431Z,1544003721.431 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T09:55:21.431Z,1544003721.431 [NAL9602] Data Fault, FailCount= 5 2018-12-05T09:55:21.431Z,1544003721.431 [NAL9602](ERROR): Data Fault 2018-12-05T09:55:21.465Z,1544003721.465 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T09:55:21.466Z,1544003721.466 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T09:55:21.823Z,1544003721.823 [NAL9602](INFO): Powering down 2018-12-05T09:55:21.874Z,1544003721.874 [CBIT](INFO): Critical error at 20181205T095521 2018-12-05T09:56:07.570Z,1544003767.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:56:07.571Z,1544003767.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-05T09:56:07.571Z,1544003767.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:56:07.573Z,1544003767.573 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:56:07.573Z,1544003767.573 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-05T09:56:07.573Z,1544003767.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:56:07.587Z,1544003767.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:56:07.587Z,1544003767.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:56:07.978Z,1544003767.978 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:56:07.978Z,1544003767.978 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-05T09:56:07.979Z,1544003767.979 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:56:07.979Z,1544003767.979 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-05T09:56:08.374Z,1544003768.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:56:08.374Z,1544003768.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:56:08.375Z,1544003768.375 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:56:08.375Z,1544003768.375 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:56:08.375Z,1544003768.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:56:08.376Z,1544003768.376 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:57:21.541Z,1544003841.541 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T09:57:21.541Z,1544003841.541 [NAL9602] No Fault, FailCount= 5 2018-12-05T09:57:21.896Z,1544003841.896 [NAL9602](INFO): Powering up NAL9602 2018-12-05T09:57:33.095Z,1544003853.095 [NAL9602](INFO): NAL9602 initialized 2018-12-05T09:58:08.683Z,1544003888.683 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:58:08.683Z,1544003888.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-05T09:58:08.683Z,1544003888.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T09:58:08.685Z,1544003888.685 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T09:58:08.685Z,1544003888.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-05T09:58:08.685Z,1544003888.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T09:58:08.699Z,1544003888.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T09:58:08.699Z,1544003888.699 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T09:58:09.109Z,1544003889.109 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T09:58:09.109Z,1544003889.109 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-05T09:58:09.110Z,1544003889.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T09:58:09.110Z,1544003889.110 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-05T09:58:09.486Z,1544003889.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T09:58:09.486Z,1544003889.486 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:58:09.487Z,1544003889.487 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T09:58:09.488Z,1544003889.488 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T09:58:09.488Z,1544003889.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T09:58:09.488Z,1544003889.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:00:09.552Z,1544004009.552 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:00:09.553Z,1544004009.553 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-05T10:00:09.553Z,1544004009.553 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:00:09.555Z,1544004009.555 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:00:09.555Z,1544004009.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-05T10:00:09.555Z,1544004009.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:00:09.558Z,1544004009.558 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T09:55:08.7Z 2018-12-05T10:00:09.558Z,1544004009.558 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T10:00:09.558Z,1544004009.558 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T10:00:09.569Z,1544004009.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:00:09.570Z,1544004009.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:00:09.703Z,1544004009.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:00:09.703Z,1544004009.703 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-05T10:00:09.703Z,1544004009.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:00:09.704Z,1544004009.704 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-05T10:00:10.498Z,1544004010.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:00:10.499Z,1544004010.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:00:10.499Z,1544004010.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:00:10.499Z,1544004010.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:00:10.500Z,1544004010.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:00:10.500Z,1544004010.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:00:14.491Z,1544004014.491 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181203T211451/Courier0639.lzma 2018-12-05T10:00:15.277Z,1544004015.277 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0639.lzma.bak 2018-12-05T10:00:15.277Z,1544004015.277 [DataOverHttps](INFO): SBD MOMSN=8968131 2018-12-05T10:00:24.774Z,1544004024.774 [DataOverHttps](INFO): Sending 313 bytes from file Logs/20181203T211451/Express0640.lzma 2018-12-05T10:00:25.546Z,1544004025.546 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0640.lzma.bak 2018-12-05T10:00:25.547Z,1544004025.547 [DataOverHttps](INFO): SBD MOMSN=8968136 2018-12-05T10:00:26.918Z,1544004026.918 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T10:00:26.918Z,1544004026.918 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T10:00:26.918Z,1544004026.918 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T10:02:10.667Z,1544004130.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:02:10.667Z,1544004130.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-05T10:02:10.667Z,1544004130.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:02:10.669Z,1544004130.669 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:02:10.669Z,1544004130.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-05T10:02:10.669Z,1544004130.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:02:10.683Z,1544004130.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:02:10.683Z,1544004130.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:02:11.075Z,1544004131.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:02:11.075Z,1544004131.075 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-05T10:02:11.076Z,1544004131.076 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:02:11.076Z,1544004131.076 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-05T10:02:11.470Z,1544004131.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:02:11.470Z,1544004131.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:02:11.471Z,1544004131.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:02:11.471Z,1544004131.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:02:11.472Z,1544004131.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:02:11.472Z,1544004131.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:02:36.345Z,1544004156.345 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T10:03:07.099Z,1544004187.099 [NAL9602](INFO): Powering down 2018-12-05T10:04:11.614Z,1544004251.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:04:11.614Z,1544004251.614 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-05T10:04:11.614Z,1544004251.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:04:11.616Z,1544004251.616 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:04:11.616Z,1544004251.616 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-05T10:04:11.617Z,1544004251.617 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:04:11.630Z,1544004251.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:04:11.630Z,1544004251.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:04:12.018Z,1544004252.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:04:12.018Z,1544004252.018 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-05T10:04:12.019Z,1544004252.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:04:12.019Z,1544004252.019 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-05T10:04:12.414Z,1544004252.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:04:12.414Z,1544004252.414 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:04:12.415Z,1544004252.415 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:04:12.415Z,1544004252.415 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:04:12.415Z,1544004252.415 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:04:12.416Z,1544004252.416 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:05:27.287Z,1544004327.287 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T10:05:27.287Z,1544004327.287 [Default:CheckIn:C.Wait] Stopped 2018-12-05T10:05:27.287Z,1544004327.287 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T10:05:27.287Z,1544004327.287 [Default:CheckIn:D] Running Loop=1 2018-12-05T10:05:27.688Z,1544004327.688 [Default:CheckIn:D] Stopped 2018-12-05T10:05:27.688Z,1544004327.688 [Default:CheckIn:E] Running Loop=1 2018-12-05T10:05:28.094Z,1544004328.094 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2210.594531 min 2018-12-05T10:05:28.094Z,1544004328.094 [Default:CheckIn:E] Stopped 2018-12-05T10:05:28.095Z,1544004328.095 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T10:05:28.095Z,1544004328.095 [Default:CheckIn] Stopped 2018-12-05T10:05:28.095Z,1544004328.095 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T10:05:28.095Z,1544004328.095 [Default:CheckIn](INFO): Running loop #215 2018-12-05T10:05:28.095Z,1544004328.095 [Default:CheckIn] Running Loop=215 2018-12-05T10:05:28.095Z,1544004328.095 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T10:05:28.095Z,1544004328.095 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T10:05:28.859Z,1544004328.859 [NAL9602](INFO): Powering up 2018-12-05T10:05:40.060Z,1544004340.060 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:06:12.018Z,1544004372.018 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T10:06:12.102Z,1544004372.102 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T10:06:12.102Z,1544004372.102 [NAL9602] Data Fault, FailCount= 1 2018-12-05T10:06:12.102Z,1544004372.102 [NAL9602](ERROR): Data Fault 2018-12-05T10:06:12.181Z,1544004372.181 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T10:06:12.415Z,1544004372.415 [NAL9602](INFO): Powering down 2018-12-05T10:06:12.446Z,1544004372.446 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:06:12.446Z,1544004372.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-05T10:06:12.447Z,1544004372.447 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:06:12.449Z,1544004372.449 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:06:12.449Z,1544004372.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-05T10:06:12.449Z,1544004372.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:06:12.463Z,1544004372.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:06:12.463Z,1544004372.463 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:06:12.860Z,1544004372.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:06:12.860Z,1544004372.860 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-05T10:06:12.860Z,1544004372.860 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:06:12.860Z,1544004372.860 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-05T10:06:13.240Z,1544004373.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:06:13.240Z,1544004373.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:06:13.240Z,1544004373.240 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:06:13.241Z,1544004373.241 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:06:13.241Z,1544004373.241 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:06:13.242Z,1544004373.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:06:13.254Z,1544004373.254 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T10:06:13.255Z,1544004373.255 [NAL9602] No Fault, FailCount= 1 2018-12-05T10:06:42.767Z,1544004402.767 [NAL9602](INFO): Powering up NAL9602 2018-12-05T10:06:53.568Z,1544004413.568 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:07:14.802Z,1544004434.802 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T10:07:14.802Z,1544004434.802 [DropWeight] No Fault, FailCount= 1 2018-12-05T10:08:13.390Z,1544004493.390 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:08:13.391Z,1544004493.391 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-05T10:08:13.391Z,1544004493.391 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:08:13.393Z,1544004493.393 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:08:13.393Z,1544004493.393 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-05T10:08:13.393Z,1544004493.393 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:08:13.406Z,1544004493.406 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:08:13.407Z,1544004493.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:08:13.804Z,1544004493.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:08:13.804Z,1544004493.804 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-05T10:08:13.805Z,1544004493.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:08:13.805Z,1544004493.805 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-05T10:08:14.206Z,1544004494.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:08:14.206Z,1544004494.206 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:08:14.207Z,1544004494.207 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:08:14.207Z,1544004494.207 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:08:14.207Z,1544004494.207 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:08:14.208Z,1544004494.208 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:10:14.473Z,1544004614.473 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:10:14.473Z,1544004614.473 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-05T10:10:14.473Z,1544004614.473 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:10:14.475Z,1544004614.475 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:10:14.475Z,1544004614.475 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-05T10:10:14.475Z,1544004614.475 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:10:14.489Z,1544004614.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:10:14.489Z,1544004614.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:10:14.882Z,1544004614.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:10:14.883Z,1544004614.883 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-05T10:10:14.883Z,1544004614.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:10:14.883Z,1544004614.883 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-05T10:10:15.278Z,1544004615.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:10:15.279Z,1544004615.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:10:15.279Z,1544004615.279 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:10:15.280Z,1544004615.280 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:10:15.280Z,1544004615.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:10:15.280Z,1544004615.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:10:29.354Z,1544004629.354 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T10:05:28.1Z 2018-12-05T10:10:29.355Z,1544004629.355 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T10:10:29.355Z,1544004629.355 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T10:10:34.364Z,1544004634.364 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0642.lzma 2018-12-05T10:10:35.166Z,1544004635.166 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0642.lzma.bak 2018-12-05T10:10:35.167Z,1544004635.167 [DataOverHttps](INFO): SBD MOMSN=8968159 2018-12-05T10:10:44.580Z,1544004644.580 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T10:10:44.662Z,1544004644.662 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0643.lzma 2018-12-05T10:10:45.425Z,1544004645.425 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0643.lzma.bak 2018-12-05T10:10:45.425Z,1544004645.425 [DataOverHttps](INFO): SBD MOMSN=8968161 2018-12-05T10:10:46.795Z,1544004646.795 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T10:10:46.795Z,1544004646.795 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T10:10:46.795Z,1544004646.795 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T10:11:14.868Z,1544004674.868 [NAL9602](INFO): Powering down 2018-12-05T10:12:15.678Z,1544004735.678 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:12:15.678Z,1544004735.678 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-05T10:12:15.678Z,1544004735.678 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:12:15.680Z,1544004735.680 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:12:15.681Z,1544004735.681 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-05T10:12:15.681Z,1544004735.681 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:12:15.694Z,1544004735.694 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:12:15.694Z,1544004735.694 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:12:16.084Z,1544004736.084 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:12:16.085Z,1544004736.085 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-05T10:12:16.085Z,1544004736.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:12:16.085Z,1544004736.085 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-05T10:12:16.478Z,1544004736.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:12:16.483Z,1544004736.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:12:16.483Z,1544004736.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:12:16.483Z,1544004736.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:12:16.484Z,1544004736.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:12:16.484Z,1544004736.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:14:16.815Z,1544004856.815 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:14:16.815Z,1544004856.815 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-05T10:14:16.815Z,1544004856.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:14:16.817Z,1544004856.817 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:14:16.817Z,1544004856.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-05T10:14:16.817Z,1544004856.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:14:16.831Z,1544004856.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:14:16.831Z,1544004856.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:14:17.234Z,1544004857.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:14:17.234Z,1544004857.234 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-05T10:14:17.234Z,1544004857.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:14:17.235Z,1544004857.235 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-05T10:14:17.615Z,1544004857.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:14:17.616Z,1544004857.616 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:14:17.616Z,1544004857.616 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:14:17.616Z,1544004857.616 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:14:17.617Z,1544004857.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:14:17.617Z,1544004857.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:15:47.128Z,1544004947.128 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T10:15:47.128Z,1544004947.128 [Default:CheckIn:C.Wait] Stopped 2018-12-05T10:15:47.128Z,1544004947.128 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T10:15:47.128Z,1544004947.128 [Default:CheckIn:D] Running Loop=1 2018-12-05T10:15:47.537Z,1544004947.537 [Default:CheckIn:D] Stopped 2018-12-05T10:15:47.537Z,1544004947.537 [Default:CheckIn:E] Running Loop=1 2018-12-05T10:15:47.941Z,1544004947.941 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2220.925260 min 2018-12-05T10:15:47.941Z,1544004947.941 [Default:CheckIn:E] Stopped 2018-12-05T10:15:47.941Z,1544004947.941 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T10:15:47.941Z,1544004947.941 [Default:CheckIn] Stopped 2018-12-05T10:15:47.941Z,1544004947.941 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T10:15:47.941Z,1544004947.941 [Default:CheckIn](INFO): Running loop #216 2018-12-05T10:15:47.941Z,1544004947.941 [Default:CheckIn] Running Loop=216 2018-12-05T10:15:47.942Z,1544004947.942 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T10:15:47.942Z,1544004947.942 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T10:15:48.688Z,1544004948.688 [NAL9602](INFO): Powering up 2018-12-05T10:15:59.888Z,1544004959.888 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:16:00.688Z,1544004960.688 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T10:16:00.688Z,1544004960.688 [NAL9602] Data Fault, FailCount= 2 2018-12-05T10:16:00.688Z,1544004960.688 [NAL9602](ERROR): Data Fault 2018-12-05T10:16:00.766Z,1544004960.766 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T10:16:01.088Z,1544004961.088 [NAL9602](INFO): Powering down 2018-12-05T10:16:01.946Z,1544004961.946 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T10:16:01.946Z,1544004961.946 [NAL9602] No Fault, FailCount= 2 2018-12-05T10:16:17.666Z,1544004977.666 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:16:17.666Z,1544004977.666 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-05T10:16:17.666Z,1544004977.666 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:16:17.669Z,1544004977.669 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:16:17.669Z,1544004977.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-05T10:16:17.669Z,1544004977.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:16:17.708Z,1544004977.708 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:16:17.708Z,1544004977.708 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:16:18.066Z,1544004978.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:16:18.066Z,1544004978.066 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-05T10:16:18.067Z,1544004978.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:16:18.067Z,1544004978.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-05T10:16:18.454Z,1544004978.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:16:18.454Z,1544004978.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:16:18.455Z,1544004978.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:16:18.455Z,1544004978.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:16:18.455Z,1544004978.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:16:18.456Z,1544004978.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:16:31.224Z,1544004991.224 [NAL9602](INFO): Powering up NAL9602 2018-12-05T10:16:43.396Z,1544005003.396 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:18:18.827Z,1544005098.827 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:18:18.827Z,1544005098.827 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-05T10:18:18.827Z,1544005098.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:18:18.829Z,1544005098.829 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:18:18.829Z,1544005098.829 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-05T10:18:18.829Z,1544005098.829 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:18:18.843Z,1544005098.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:18:18.843Z,1544005098.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:18:19.101Z,1544005099.101 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:18:19.101Z,1544005099.101 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-05T10:18:19.102Z,1544005099.102 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:18:19.102Z,1544005099.102 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-05T10:18:19.494Z,1544005099.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:18:19.495Z,1544005099.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:18:19.495Z,1544005099.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:18:19.496Z,1544005099.496 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:18:19.496Z,1544005099.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:18:19.496Z,1544005099.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:18:31.467Z,1544005111.467 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T10:20:19.658Z,1544005219.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:20:19.658Z,1544005219.658 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-05T10:20:19.658Z,1544005219.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:20:19.660Z,1544005219.660 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:20:19.661Z,1544005219.661 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-05T10:20:19.661Z,1544005219.661 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:20:19.674Z,1544005219.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:20:19.674Z,1544005219.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:20:20.064Z,1544005220.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:20:20.064Z,1544005220.064 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-05T10:20:20.065Z,1544005220.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:20:20.065Z,1544005220.065 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-05T10:20:20.470Z,1544005220.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:20:20.471Z,1544005220.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:20:20.471Z,1544005220.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:20:20.471Z,1544005220.471 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:20:20.472Z,1544005220.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:20:20.472Z,1544005220.472 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:20:49.570Z,1544005249.570 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T10:15:47.9Z 2018-12-05T10:20:49.570Z,1544005249.570 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T10:20:49.570Z,1544005249.570 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T10:20:54.537Z,1544005254.537 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0645.lzma 2018-12-05T10:20:55.329Z,1544005255.329 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0645.lzma.bak 2018-12-05T10:20:55.329Z,1544005255.329 [DataOverHttps](INFO): SBD MOMSN=8968183 2018-12-05T10:21:04.886Z,1544005264.886 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0646.lzma 2018-12-05T10:21:05.686Z,1544005265.686 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0646.lzma.bak 2018-12-05T10:21:05.686Z,1544005265.686 [DataOverHttps](INFO): SBD MOMSN=8968185 2018-12-05T10:21:07.033Z,1544005267.033 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T10:21:07.033Z,1544005267.033 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T10:21:07.033Z,1544005267.033 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T10:21:46.796Z,1544005306.796 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T10:22:17.183Z,1544005337.183 [NAL9602](INFO): Powering down 2018-12-05T10:22:21.165Z,1544005341.165 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:22:21.165Z,1544005341.165 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-05T10:22:21.165Z,1544005341.165 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:22:21.167Z,1544005341.167 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:22:21.167Z,1544005341.167 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-05T10:22:21.167Z,1544005341.167 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:22:21.180Z,1544005341.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:22:21.181Z,1544005341.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:22:21.295Z,1544005341.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:22:21.295Z,1544005341.295 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-05T10:22:21.295Z,1544005341.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:22:21.296Z,1544005341.296 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-05T10:22:21.619Z,1544005341.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:22:21.619Z,1544005341.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:22:21.620Z,1544005341.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:22:21.620Z,1544005341.620 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:22:21.620Z,1544005341.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:22:21.621Z,1544005341.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:24:21.941Z,1544005461.941 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:24:21.942Z,1544005461.942 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-05T10:24:21.942Z,1544005461.942 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:24:21.944Z,1544005461.944 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:24:21.944Z,1544005461.944 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-05T10:24:21.944Z,1544005461.944 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:24:21.957Z,1544005461.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:24:21.957Z,1544005461.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:24:22.357Z,1544005462.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:24:22.357Z,1544005462.357 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-05T10:24:22.357Z,1544005462.357 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:24:22.357Z,1544005462.357 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-05T10:24:22.722Z,1544005462.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:24:22.722Z,1544005462.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:24:22.723Z,1544005462.723 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:24:22.723Z,1544005462.723 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:24:22.724Z,1544005462.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:24:22.724Z,1544005462.724 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:26:07.246Z,1544005567.246 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T10:26:07.246Z,1544005567.246 [Default:CheckIn:C.Wait] Stopped 2018-12-05T10:26:07.246Z,1544005567.246 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T10:26:07.247Z,1544005567.247 [Default:CheckIn:D] Running Loop=1 2018-12-05T10:26:07.650Z,1544005567.650 [Default:CheckIn:D] Stopped 2018-12-05T10:26:07.650Z,1544005567.650 [Default:CheckIn:E] Running Loop=1 2018-12-05T10:26:08.047Z,1544005568.047 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2231.260417 min 2018-12-05T10:26:08.047Z,1544005568.047 [Default:CheckIn:E] Stopped 2018-12-05T10:26:08.048Z,1544005568.048 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T10:26:08.048Z,1544005568.048 [Default:CheckIn] Stopped 2018-12-05T10:26:08.048Z,1544005568.048 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T10:26:08.048Z,1544005568.048 [Default:CheckIn](INFO): Running loop #217 2018-12-05T10:26:08.048Z,1544005568.048 [Default:CheckIn] Running Loop=217 2018-12-05T10:26:08.048Z,1544005568.048 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T10:26:08.048Z,1544005568.048 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T10:26:08.815Z,1544005568.815 [NAL9602](INFO): Powering up 2018-12-05T10:26:20.016Z,1544005580.016 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:26:22.850Z,1544005582.850 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:26:22.850Z,1544005582.850 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-05T10:26:22.850Z,1544005582.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:26:22.852Z,1544005582.852 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:26:22.853Z,1544005582.853 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-05T10:26:22.853Z,1544005582.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:26:22.866Z,1544005582.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:26:22.866Z,1544005582.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:26:23.258Z,1544005583.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:26:23.258Z,1544005583.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-05T10:26:23.259Z,1544005583.259 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:26:23.259Z,1544005583.259 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-05T10:26:23.638Z,1544005583.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:26:23.639Z,1544005583.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:26:23.639Z,1544005583.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:26:23.640Z,1544005583.640 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:26:23.640Z,1544005583.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:26:23.641Z,1544005583.641 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:26:51.976Z,1544005611.976 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T10:26:52.058Z,1544005612.058 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T10:26:52.058Z,1544005612.058 [NAL9602] Data Fault, FailCount= 3 2018-12-05T10:26:52.058Z,1544005612.058 [NAL9602](ERROR): Data Fault 2018-12-05T10:26:52.093Z,1544005612.093 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T10:26:52.375Z,1544005612.375 [NAL9602](INFO): Powering down 2018-12-05T10:26:53.209Z,1544005613.209 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T10:26:53.209Z,1544005613.209 [NAL9602] No Fault, FailCount= 3 2018-12-05T10:27:22.726Z,1544005642.727 [NAL9602](INFO): Powering up NAL9602 2018-12-05T10:27:33.928Z,1544005653.928 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:27:34.734Z,1544005654.734 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T10:27:34.734Z,1544005654.734 [NAL9602] Data Fault, FailCount= 4 2018-12-05T10:27:34.734Z,1544005654.734 [NAL9602](ERROR): Data Fault 2018-12-05T10:27:34.770Z,1544005654.770 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T10:27:37.831Z,1544005657.831 [NAL9602](INFO): Powering down 2018-12-05T10:27:38.318Z,1544005658.318 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T10:27:38.318Z,1544005658.318 [NAL9602] No Fault, FailCount= 4 2018-12-05T10:28:07.878Z,1544005687.878 [NAL9602](INFO): Powering up NAL9602 2018-12-05T10:28:19.032Z,1544005699.032 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:28:23.866Z,1544005703.866 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:28:23.866Z,1544005703.866 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-05T10:28:23.866Z,1544005703.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:28:23.868Z,1544005703.868 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:28:23.868Z,1544005703.868 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-05T10:28:23.868Z,1544005703.868 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:28:23.882Z,1544005703.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:28:23.882Z,1544005703.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:28:24.279Z,1544005704.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:28:24.280Z,1544005704.280 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-05T10:28:24.280Z,1544005704.280 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:28:24.280Z,1544005704.280 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-05T10:28:24.665Z,1544005704.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:28:24.666Z,1544005704.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:28:24.666Z,1544005704.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:28:24.667Z,1544005704.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:28:24.667Z,1544005704.667 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:28:24.667Z,1544005704.667 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:30:24.867Z,1544005824.867 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:30:24.867Z,1544005824.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-05T10:30:24.867Z,1544005824.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:30:24.869Z,1544005824.869 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:30:24.869Z,1544005824.869 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-05T10:30:24.869Z,1544005824.869 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:30:24.883Z,1544005824.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:30:24.883Z,1544005824.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:30:25.282Z,1544005825.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:30:25.283Z,1544005825.283 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-05T10:30:25.283Z,1544005825.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:30:25.283Z,1544005825.283 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-05T10:30:25.670Z,1544005825.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:30:25.670Z,1544005825.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:30:25.671Z,1544005825.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:30:25.671Z,1544005825.671 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:30:25.672Z,1544005825.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:30:25.672Z,1544005825.672 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:31:09.135Z,1544005869.135 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T10:26:08.0Z 2018-12-05T10:31:09.135Z,1544005869.135 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T10:31:09.135Z,1544005869.135 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T10:31:14.206Z,1544005874.206 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0648.lzma 2018-12-05T10:31:15.005Z,1544005875.005 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0648.lzma.bak 2018-12-05T10:31:15.006Z,1544005875.006 [DataOverHttps](INFO): SBD MOMSN=8968209 2018-12-05T10:31:24.369Z,1544005884.369 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T10:31:24.455Z,1544005884.455 [DataOverHttps](INFO): Sending 344 bytes from file Logs/20181203T211451/Express0649.lzma 2018-12-05T10:31:25.225Z,1544005885.225 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0649.lzma.bak 2018-12-05T10:31:25.225Z,1544005885.225 [DataOverHttps](INFO): SBD MOMSN=8968211 2018-12-05T10:31:26.793Z,1544005886.793 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T10:31:26.793Z,1544005886.793 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T10:31:26.793Z,1544005886.793 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T10:31:54.877Z,1544005914.877 [NAL9602](INFO): Powering down 2018-12-05T10:32:25.719Z,1544005945.719 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:32:25.719Z,1544005945.719 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-05T10:32:25.719Z,1544005945.719 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:32:25.721Z,1544005945.721 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:32:25.721Z,1544005945.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-05T10:32:25.721Z,1544005945.721 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:32:25.780Z,1544005945.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:32:25.780Z,1544005945.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:32:26.126Z,1544005946.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:32:26.126Z,1544005946.126 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-05T10:32:26.127Z,1544005946.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:32:26.127Z,1544005946.127 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-05T10:32:26.522Z,1544005946.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:32:26.522Z,1544005946.522 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:32:26.523Z,1544005946.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:32:26.523Z,1544005946.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:32:26.523Z,1544005946.523 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:32:26.524Z,1544005946.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:34:26.556Z,1544006066.556 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:34:26.556Z,1544006066.556 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-05T10:34:26.556Z,1544006066.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:34:26.558Z,1544006066.558 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:34:26.558Z,1544006066.558 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-05T10:34:26.558Z,1544006066.558 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:34:26.582Z,1544006066.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:34:26.582Z,1544006066.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:34:26.938Z,1544006066.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:34:26.939Z,1544006066.939 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-05T10:34:26.939Z,1544006066.939 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:34:26.939Z,1544006066.939 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-05T10:34:27.330Z,1544006067.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:34:27.331Z,1544006067.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:34:27.331Z,1544006067.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:34:27.331Z,1544006067.331 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:34:27.332Z,1544006067.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:34:27.332Z,1544006067.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:36:26.902Z,1544006186.902 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T10:36:26.902Z,1544006186.902 [Default:CheckIn:C.Wait] Stopped 2018-12-05T10:36:26.902Z,1544006186.902 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T10:36:26.903Z,1544006186.903 [Default:CheckIn:D] Running Loop=1 2018-12-05T10:36:27.306Z,1544006187.306 [Default:CheckIn:D] Stopped 2018-12-05T10:36:27.306Z,1544006187.306 [Default:CheckIn:E] Running Loop=1 2018-12-05T10:36:27.699Z,1544006187.699 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:36:27.699Z,1544006187.699 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-05T10:36:27.699Z,1544006187.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:36:27.701Z,1544006187.701 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:36:27.701Z,1544006187.701 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-05T10:36:27.701Z,1544006187.701 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:36:27.704Z,1544006187.704 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2241.588021 min 2018-12-05T10:36:27.704Z,1544006187.704 [Default:CheckIn:E] Stopped 2018-12-05T10:36:27.704Z,1544006187.704 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T10:36:27.704Z,1544006187.704 [Default:CheckIn] Stopped 2018-12-05T10:36:27.705Z,1544006187.705 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T10:36:27.705Z,1544006187.705 [Default:CheckIn](INFO): Running loop #218 2018-12-05T10:36:27.705Z,1544006187.705 [Default:CheckIn] Running Loop=218 2018-12-05T10:36:27.705Z,1544006187.705 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T10:36:27.705Z,1544006187.705 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T10:36:27.716Z,1544006187.716 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:36:27.716Z,1544006187.716 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:36:28.127Z,1544006188.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:36:28.127Z,1544006188.127 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-05T10:36:28.127Z,1544006188.127 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:36:28.127Z,1544006188.127 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-05T10:36:28.475Z,1544006188.475 [NAL9602](INFO): Powering up 2018-12-05T10:36:28.510Z,1544006188.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:36:28.510Z,1544006188.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:36:28.511Z,1544006188.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:36:28.511Z,1544006188.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:36:28.511Z,1544006188.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:36:28.512Z,1544006188.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:36:39.676Z,1544006199.676 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:37:11.636Z,1544006231.636 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T10:37:11.714Z,1544006231.714 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T10:37:11.714Z,1544006231.714 [NAL9602] Data Fault, FailCount= 5 2018-12-05T10:37:11.714Z,1544006231.714 [NAL9602](ERROR): Data Fault 2018-12-05T10:37:11.748Z,1544006231.748 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T10:37:11.748Z,1544006231.748 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T10:37:12.032Z,1544006232.032 [NAL9602](INFO): Powering down 2018-12-05T10:37:12.101Z,1544006232.101 [CBIT](INFO): Critical error at 20181205T103711 2018-12-05T10:37:16.029Z,1544006236.029 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T10:37:16.029Z,1544006236.029 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T10:37:16.029Z,1544006236.029 [DropWeight](ERROR): Hardware Fault 2018-12-05T10:37:16.060Z,1544006236.060 [CBIT](INFO): Critical error at 20181205T103716 2018-12-05T10:37:16.083Z,1544006236.083 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T10:37:16.083Z,1544006236.083 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T10:37:16.495Z,1544006236.495 [CBIT](INFO): Critical error at 20181205T103716 2018-12-05T10:38:28.867Z,1544006308.867 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:38:28.867Z,1544006308.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-05T10:38:28.867Z,1544006308.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:38:28.869Z,1544006308.869 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:38:28.870Z,1544006308.870 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-05T10:38:28.870Z,1544006308.870 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:38:28.899Z,1544006308.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:38:28.900Z,1544006308.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:38:29.294Z,1544006309.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:38:29.294Z,1544006309.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-05T10:38:29.295Z,1544006309.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:38:29.295Z,1544006309.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-05T10:38:29.678Z,1544006309.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:38:29.678Z,1544006309.678 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:38:29.679Z,1544006309.679 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:38:29.679Z,1544006309.679 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:38:29.680Z,1544006309.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:38:29.680Z,1544006309.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:39:12.077Z,1544006352.077 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T10:39:12.077Z,1544006352.077 [NAL9602] No Fault, FailCount= 5 2018-12-05T10:39:12.435Z,1544006352.435 [NAL9602](INFO): Powering up NAL9602 2018-12-05T10:39:23.235Z,1544006363.235 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:39:24.036Z,1544006364.036 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T10:39:24.036Z,1544006364.036 [NAL9602] Data Fault, FailCount= 1 2018-12-05T10:39:24.036Z,1544006364.036 [NAL9602](ERROR): Data Fault 2018-12-05T10:39:24.104Z,1544006364.104 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T10:39:24.435Z,1544006364.435 [NAL9602](INFO): Powering down 2018-12-05T10:39:25.282Z,1544006365.282 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T10:39:25.282Z,1544006365.282 [NAL9602] No Fault, FailCount= 1 2018-12-05T10:39:54.799Z,1544006394.799 [NAL9602](INFO): Powering up NAL9602 2018-12-05T10:40:05.999Z,1544006405.999 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:40:30.058Z,1544006430.058 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:40:30.058Z,1544006430.058 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-05T10:40:30.059Z,1544006430.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:40:30.061Z,1544006430.061 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:40:30.061Z,1544006430.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-05T10:40:30.061Z,1544006430.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:40:30.074Z,1544006430.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:40:30.075Z,1544006430.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:40:30.471Z,1544006430.471 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:40:30.471Z,1544006430.471 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-05T10:40:30.471Z,1544006430.471 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:40:30.471Z,1544006430.471 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-05T10:40:30.858Z,1544006430.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:40:30.859Z,1544006430.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:40:30.859Z,1544006430.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:40:30.859Z,1544006430.859 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:40:30.860Z,1544006430.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:40:30.860Z,1544006430.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:41:28.842Z,1544006488.842 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T10:36:27.7Z 2018-12-05T10:41:28.843Z,1544006488.843 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T10:41:28.843Z,1544006488.843 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T10:41:33.750Z,1544006493.750 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181203T211451/Courier0651.lzma 2018-12-05T10:41:34.549Z,1544006494.549 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0651.lzma.bak 2018-12-05T10:41:34.549Z,1544006494.549 [DataOverHttps](INFO): SBD MOMSN=8968234 2018-12-05T10:41:44.178Z,1544006504.178 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T10:41:44.224Z,1544006504.224 [DataOverHttps](INFO): Sending 341 bytes from file Logs/20181203T211451/Express0652.lzma 2018-12-05T10:41:45.025Z,1544006505.025 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0652.lzma.bak 2018-12-05T10:41:45.026Z,1544006505.026 [DataOverHttps](INFO): SBD MOMSN=8968239 2018-12-05T10:41:46.365Z,1544006506.365 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T10:41:46.365Z,1544006506.365 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T10:41:46.365Z,1544006506.365 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T10:42:14.367Z,1544006534.367 [NAL9602](INFO): Powering down 2018-12-05T10:42:31.178Z,1544006551.178 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:42:31.178Z,1544006551.178 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-05T10:42:31.178Z,1544006551.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:42:31.180Z,1544006551.180 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:42:31.180Z,1544006551.180 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-05T10:42:31.180Z,1544006551.180 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:42:31.194Z,1544006551.194 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:42:31.195Z,1544006551.195 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:42:31.562Z,1544006551.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:42:31.562Z,1544006551.562 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-05T10:42:31.562Z,1544006551.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:42:31.563Z,1544006551.563 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-05T10:42:31.943Z,1544006551.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:42:31.943Z,1544006551.943 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:42:31.944Z,1544006551.944 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:42:31.944Z,1544006551.944 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:42:31.945Z,1544006551.945 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:42:31.945Z,1544006551.945 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:44:32.119Z,1544006672.119 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:44:32.120Z,1544006672.120 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-05T10:44:32.120Z,1544006672.120 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:44:32.122Z,1544006672.122 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:44:32.122Z,1544006672.122 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-05T10:44:32.122Z,1544006672.122 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:44:32.136Z,1544006672.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:44:32.136Z,1544006672.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:44:32.538Z,1544006672.538 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:44:32.538Z,1544006672.538 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-05T10:44:32.539Z,1544006672.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:44:32.539Z,1544006672.539 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-05T10:44:32.917Z,1544006672.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:44:32.917Z,1544006672.917 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:44:32.918Z,1544006672.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:44:32.918Z,1544006672.918 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:44:32.919Z,1544006672.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:44:32.919Z,1544006672.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:46:32.952Z,1544006792.952 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:46:32.952Z,1544006792.952 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-05T10:46:32.952Z,1544006792.952 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:46:32.954Z,1544006792.954 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:46:32.954Z,1544006792.954 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-05T10:46:32.954Z,1544006792.954 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:46:32.985Z,1544006792.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:46:32.985Z,1544006792.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:46:33.371Z,1544006793.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:46:33.371Z,1544006793.371 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-05T10:46:33.371Z,1544006793.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:46:33.371Z,1544006793.371 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-05T10:46:33.758Z,1544006793.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:46:33.758Z,1544006793.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:46:33.759Z,1544006793.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:46:33.759Z,1544006793.759 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:46:33.759Z,1544006793.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:46:33.760Z,1544006793.760 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:46:46.565Z,1544006806.565 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T10:46:46.566Z,1544006806.566 [Default:CheckIn:C.Wait] Stopped 2018-12-05T10:46:46.566Z,1544006806.566 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T10:46:46.566Z,1544006806.566 [Default:CheckIn:D] Running Loop=1 2018-12-05T10:46:46.966Z,1544006806.966 [Default:CheckIn:D] Stopped 2018-12-05T10:46:46.966Z,1544006806.966 [Default:CheckIn:E] Running Loop=1 2018-12-05T10:46:47.368Z,1544006807.368 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2251.915625 min 2018-12-05T10:46:47.368Z,1544006807.368 [Default:CheckIn:E] Stopped 2018-12-05T10:46:47.368Z,1544006807.368 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T10:46:47.368Z,1544006807.368 [Default:CheckIn] Stopped 2018-12-05T10:46:47.368Z,1544006807.368 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T10:46:47.368Z,1544006807.368 [Default:CheckIn](INFO): Running loop #219 2018-12-05T10:46:47.369Z,1544006807.369 [Default:CheckIn] Running Loop=219 2018-12-05T10:46:47.369Z,1544006807.369 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T10:46:47.369Z,1544006807.369 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T10:46:48.127Z,1544006808.127 [NAL9602](INFO): Powering up 2018-12-05T10:46:58.928Z,1544006818.928 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:47:30.552Z,1544006850.552 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T10:47:30.630Z,1544006850.630 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T10:47:30.630Z,1544006850.630 [NAL9602] Data Fault, FailCount= 2 2018-12-05T10:47:30.630Z,1544006850.630 [NAL9602](ERROR): Data Fault 2018-12-05T10:47:30.698Z,1544006850.698 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T10:47:30.947Z,1544006850.947 [NAL9602](INFO): Powering down 2018-12-05T10:47:31.787Z,1544006851.787 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T10:47:31.788Z,1544006851.788 [NAL9602] No Fault, FailCount= 2 2018-12-05T10:48:01.303Z,1544006881.303 [NAL9602](INFO): Powering up NAL9602 2018-12-05T10:48:12.503Z,1544006892.503 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:48:34.083Z,1544006914.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:48:34.083Z,1544006914.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-05T10:48:34.083Z,1544006914.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:48:34.085Z,1544006914.085 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:48:34.085Z,1544006914.085 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-05T10:48:34.085Z,1544006914.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:48:34.099Z,1544006914.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:48:34.100Z,1544006914.100 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:48:34.499Z,1544006914.499 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:48:34.499Z,1544006914.499 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-05T10:48:34.500Z,1544006914.500 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:48:34.500Z,1544006914.500 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-05T10:48:34.886Z,1544006914.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:48:34.886Z,1544006914.886 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:48:34.887Z,1544006914.887 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:48:34.887Z,1544006914.887 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:48:34.887Z,1544006914.887 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:48:34.888Z,1544006914.888 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:50:35.005Z,1544007035.005 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:50:35.005Z,1544007035.005 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-05T10:50:35.005Z,1544007035.005 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:50:35.007Z,1544007035.007 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:50:35.008Z,1544007035.008 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-05T10:50:35.008Z,1544007035.008 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:50:35.021Z,1544007035.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:50:35.022Z,1544007035.022 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:50:38.090Z,1544007038.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:50:38.090Z,1544007038.090 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-05T10:50:38.107Z,1544007038.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:50:38.107Z,1544007038.107 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-05T10:50:38.187Z,1544007038.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:50:38.188Z,1544007038.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:50:38.188Z,1544007038.188 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:50:38.188Z,1544007038.188 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:50:38.189Z,1544007038.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:50:38.189Z,1544007038.189 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:51:48.529Z,1544007108.529 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T10:46:47.4Z 2018-12-05T10:51:48.530Z,1544007108.530 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T10:51:48.530Z,1544007108.530 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T10:51:53.610Z,1544007113.610 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0654.lzma 2018-12-05T10:51:54.382Z,1544007114.382 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0654.lzma.bak 2018-12-05T10:51:54.382Z,1544007114.382 [DataOverHttps](INFO): SBD MOMSN=8968262 2018-12-05T10:52:03.671Z,1544007123.671 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T10:52:03.742Z,1544007123.742 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20181203T211451/Express0655.lzma 2018-12-05T10:52:04.529Z,1544007124.529 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0655.lzma.bak 2018-12-05T10:52:04.530Z,1544007124.530 [DataOverHttps](INFO): SBD MOMSN=8968264 2018-12-05T10:52:05.871Z,1544007125.871 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T10:52:05.871Z,1544007125.871 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T10:52:05.871Z,1544007125.871 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T10:52:16.351Z,1544007136.351 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T10:52:16.351Z,1544007136.351 [DropWeight] No Fault, FailCount= 1 2018-12-05T10:52:33.903Z,1544007153.903 [NAL9602](INFO): Powering down 2018-12-05T10:52:38.321Z,1544007158.321 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:52:38.321Z,1544007158.321 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-05T10:52:38.321Z,1544007158.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:52:38.324Z,1544007158.324 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:52:38.324Z,1544007158.324 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-05T10:52:38.324Z,1544007158.324 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:52:38.340Z,1544007158.340 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:52:38.341Z,1544007158.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:52:38.773Z,1544007158.773 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:52:38.773Z,1544007158.773 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-05T10:52:38.774Z,1544007158.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:52:38.774Z,1544007158.774 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-05T10:52:39.118Z,1544007159.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:52:39.119Z,1544007159.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:52:39.119Z,1544007159.119 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:52:39.120Z,1544007159.120 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:52:39.120Z,1544007159.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:52:39.120Z,1544007159.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:54:39.443Z,1544007279.443 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:54:39.443Z,1544007279.443 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-05T10:54:39.443Z,1544007279.443 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:54:39.445Z,1544007279.445 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:54:39.445Z,1544007279.445 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-05T10:54:39.445Z,1544007279.445 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:54:39.458Z,1544007279.458 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:54:39.459Z,1544007279.459 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:54:39.865Z,1544007279.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:54:39.865Z,1544007279.865 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-05T10:54:39.866Z,1544007279.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:54:39.866Z,1544007279.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-05T10:54:40.251Z,1544007280.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:54:40.252Z,1544007280.252 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:54:40.252Z,1544007280.252 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:54:40.252Z,1544007280.252 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:54:40.253Z,1544007280.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:54:40.253Z,1544007280.253 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:56:40.425Z,1544007400.425 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:56:40.425Z,1544007400.425 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-05T10:56:40.425Z,1544007400.425 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:56:40.427Z,1544007400.427 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:56:40.427Z,1544007400.427 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-05T10:56:40.427Z,1544007400.427 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:56:40.452Z,1544007400.452 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:56:40.452Z,1544007400.452 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:56:40.838Z,1544007400.838 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:56:40.838Z,1544007400.838 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-05T10:56:40.839Z,1544007400.839 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:56:40.839Z,1544007400.839 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-05T10:56:41.238Z,1544007401.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:56:41.238Z,1544007401.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:56:41.239Z,1544007401.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:56:41.239Z,1544007401.239 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:56:41.239Z,1544007401.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:56:41.240Z,1544007401.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:57:06.014Z,1544007426.014 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T10:57:06.014Z,1544007426.014 [Default:CheckIn:C.Wait] Stopped 2018-12-05T10:57:06.014Z,1544007426.014 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T10:57:06.014Z,1544007426.014 [Default:CheckIn:D] Running Loop=1 2018-12-05T10:57:06.411Z,1544007426.411 [Default:CheckIn:D] Stopped 2018-12-05T10:57:06.411Z,1544007426.411 [Default:CheckIn:E] Running Loop=1 2018-12-05T10:57:06.818Z,1544007426.818 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2262.239844 min 2018-12-05T10:57:06.818Z,1544007426.818 [Default:CheckIn:E] Stopped 2018-12-05T10:57:06.818Z,1544007426.818 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T10:57:06.819Z,1544007426.819 [Default:CheckIn] Stopped 2018-12-05T10:57:06.819Z,1544007426.819 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T10:57:06.819Z,1544007426.819 [Default:CheckIn](INFO): Running loop #220 2018-12-05T10:57:06.819Z,1544007426.819 [Default:CheckIn] Running Loop=220 2018-12-05T10:57:06.819Z,1544007426.819 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T10:57:06.819Z,1544007426.819 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T10:57:07.583Z,1544007427.583 [NAL9602](INFO): Powering up 2018-12-05T10:57:18.784Z,1544007438.784 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:57:19.584Z,1544007439.584 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T10:57:19.584Z,1544007439.584 [NAL9602] Data Fault, FailCount= 3 2018-12-05T10:57:19.584Z,1544007439.584 [NAL9602](ERROR): Data Fault 2018-12-05T10:57:19.647Z,1544007439.647 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T10:57:19.984Z,1544007439.984 [NAL9602](INFO): Powering down 2018-12-05T10:57:20.834Z,1544007440.834 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T10:57:20.834Z,1544007440.834 [NAL9602] No Fault, FailCount= 3 2018-12-05T10:57:50.356Z,1544007470.356 [NAL9602](INFO): Powering up NAL9602 2018-12-05T10:58:01.904Z,1544007481.904 [NAL9602](INFO): NAL9602 initialized 2018-12-05T10:58:41.292Z,1544007521.292 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:58:41.292Z,1544007521.292 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-05T10:58:41.292Z,1544007521.292 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T10:58:41.322Z,1544007521.322 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T10:58:41.323Z,1544007521.323 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-05T10:58:41.323Z,1544007521.323 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T10:58:41.341Z,1544007521.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T10:58:41.341Z,1544007521.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T10:58:41.726Z,1544007521.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T10:58:41.726Z,1544007521.726 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-05T10:58:41.727Z,1544007521.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T10:58:41.727Z,1544007521.727 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-05T10:58:42.109Z,1544007522.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T10:58:42.110Z,1544007522.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:58:42.110Z,1544007522.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T10:58:42.110Z,1544007522.110 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T10:58:42.111Z,1544007522.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T10:58:42.111Z,1544007522.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:00:42.475Z,1544007642.475 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:00:42.475Z,1544007642.475 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-05T11:00:42.475Z,1544007642.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:00:42.477Z,1544007642.477 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:00:42.478Z,1544007642.478 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-05T11:00:42.478Z,1544007642.478 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:00:42.492Z,1544007642.492 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:00:42.492Z,1544007642.492 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:00:42.879Z,1544007642.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:00:42.880Z,1544007642.880 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-05T11:00:42.880Z,1544007642.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:00:42.880Z,1544007642.880 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-05T11:00:43.266Z,1544007643.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:00:43.266Z,1544007643.266 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:00:43.267Z,1544007643.267 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:00:43.267Z,1544007643.267 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:00:43.267Z,1544007643.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:00:43.268Z,1544007643.268 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:02:08.143Z,1544007728.143 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T10:57:06.8Z 2018-12-05T11:02:08.143Z,1544007728.143 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T11:02:08.143Z,1544007728.143 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T11:02:13.124Z,1544007733.124 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0657.lzma 2018-12-05T11:02:13.910Z,1544007733.910 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0657.lzma.bak 2018-12-05T11:02:13.910Z,1544007733.910 [DataOverHttps](INFO): SBD MOMSN=8968287 2018-12-05T11:02:23.372Z,1544007743.372 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0658.lzma 2018-12-05T11:02:24.173Z,1544007744.173 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0658.lzma.bak 2018-12-05T11:02:24.173Z,1544007744.173 [DataOverHttps](INFO): SBD MOMSN=8968289 2018-12-05T11:02:25.595Z,1544007745.595 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T11:02:25.595Z,1544007745.595 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T11:02:25.595Z,1544007745.595 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T11:02:43.615Z,1544007763.615 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:02:43.615Z,1544007763.615 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-05T11:02:43.615Z,1544007763.615 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:02:43.617Z,1544007763.617 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:02:43.617Z,1544007763.617 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-05T11:02:43.617Z,1544007763.617 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:02:43.631Z,1544007763.631 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:02:43.632Z,1544007763.632 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:02:44.042Z,1544007764.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:02:44.042Z,1544007764.042 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-05T11:02:44.043Z,1544007764.043 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:02:44.043Z,1544007764.043 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-05T11:02:44.427Z,1544007764.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:02:44.428Z,1544007764.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:02:44.428Z,1544007764.428 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:02:44.428Z,1544007764.428 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:02:44.429Z,1544007764.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:02:44.429Z,1544007764.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:03:04.738Z,1544007784.738 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T11:03:35.536Z,1544007815.536 [NAL9602](INFO): Powering down 2018-12-05T11:04:44.432Z,1544007884.432 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:04:44.432Z,1544007884.432 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-05T11:04:44.432Z,1544007884.432 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:04:44.435Z,1544007884.435 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:04:44.435Z,1544007884.435 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-05T11:04:44.435Z,1544007884.435 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:04:44.479Z,1544007884.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:04:44.480Z,1544007884.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:04:44.846Z,1544007884.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:04:44.846Z,1544007884.846 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-05T11:04:44.859Z,1544007884.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:04:44.859Z,1544007884.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-05T11:04:45.242Z,1544007885.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:04:45.242Z,1544007885.242 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:04:45.243Z,1544007885.243 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:04:45.243Z,1544007885.243 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:04:45.243Z,1544007885.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:04:45.244Z,1544007885.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:06:45.632Z,1544008005.632 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:06:45.632Z,1544008005.632 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-05T11:06:45.632Z,1544008005.632 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:06:45.634Z,1544008005.634 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:06:45.634Z,1544008005.634 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-05T11:06:45.635Z,1544008005.635 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:06:45.648Z,1544008005.648 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:06:45.648Z,1544008005.648 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:06:46.041Z,1544008006.041 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:06:46.041Z,1544008006.041 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-05T11:06:46.042Z,1544008006.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:06:46.042Z,1544008006.042 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-05T11:06:46.430Z,1544008006.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:06:46.430Z,1544008006.430 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:06:46.431Z,1544008006.431 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:06:46.450Z,1544008006.450 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:06:46.451Z,1544008006.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:06:46.451Z,1544008006.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:07:26.058Z,1544008046.058 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T11:07:26.058Z,1544008046.058 [Default:CheckIn:C.Wait] Stopped 2018-12-05T11:07:26.058Z,1544008046.058 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T11:07:26.059Z,1544008046.059 [Default:CheckIn:D] Running Loop=1 2018-12-05T11:07:26.466Z,1544008046.466 [Default:CheckIn:D] Stopped 2018-12-05T11:07:26.466Z,1544008046.466 [Default:CheckIn:E] Running Loop=1 2018-12-05T11:07:26.862Z,1544008046.862 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2272.573958 min 2018-12-05T11:07:26.862Z,1544008046.862 [Default:CheckIn:E] Stopped 2018-12-05T11:07:26.863Z,1544008046.863 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T11:07:26.863Z,1544008046.863 [Default:CheckIn] Stopped 2018-12-05T11:07:26.863Z,1544008046.863 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T11:07:26.863Z,1544008046.863 [Default:CheckIn](INFO): Running loop #221 2018-12-05T11:07:26.863Z,1544008046.863 [Default:CheckIn] Running Loop=221 2018-12-05T11:07:26.863Z,1544008046.863 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T11:07:26.863Z,1544008046.863 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T11:07:27.631Z,1544008047.631 [NAL9602](INFO): Powering up 2018-12-05T11:07:38.832Z,1544008058.832 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:08:10.815Z,1544008090.815 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T11:08:10.890Z,1544008090.890 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T11:08:10.890Z,1544008090.890 [NAL9602] Data Fault, FailCount= 4 2018-12-05T11:08:10.890Z,1544008090.890 [NAL9602](ERROR): Data Fault 2018-12-05T11:08:10.949Z,1544008090.949 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T11:08:11.219Z,1544008091.219 [NAL9602](INFO): Powering down 2018-12-05T11:08:12.048Z,1544008092.048 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T11:08:12.048Z,1544008092.048 [NAL9602] No Fault, FailCount= 4 2018-12-05T11:08:41.252Z,1544008121.252 [NAL9602](INFO): Powering up NAL9602 2018-12-05T11:08:46.475Z,1544008126.475 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:08:46.475Z,1544008126.475 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-05T11:08:46.475Z,1544008126.475 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:08:46.477Z,1544008126.477 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:08:46.477Z,1544008126.477 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-05T11:08:46.477Z,1544008126.477 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:08:46.548Z,1544008126.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:08:46.548Z,1544008126.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:08:46.913Z,1544008126.913 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:08:46.914Z,1544008126.914 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-05T11:08:46.926Z,1544008126.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:08:46.926Z,1544008126.926 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-05T11:08:47.270Z,1544008127.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:08:47.271Z,1544008127.271 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:08:47.271Z,1544008127.271 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:08:47.271Z,1544008127.271 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:08:47.272Z,1544008127.272 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:08:47.272Z,1544008127.272 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:08:52.452Z,1544008132.452 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:08:53.253Z,1544008133.253 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T11:08:53.253Z,1544008133.253 [NAL9602] Data Fault, FailCount= 5 2018-12-05T11:08:53.253Z,1544008133.253 [NAL9602](ERROR): Data Fault 2018-12-05T11:08:53.317Z,1544008133.317 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T11:08:53.318Z,1544008133.318 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T11:08:56.357Z,1544008136.357 [NAL9602](INFO): Powering down 2018-12-05T11:08:56.414Z,1544008136.414 [CBIT](INFO): Critical error at 20181205T110853 2018-12-05T11:10:47.606Z,1544008247.606 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:10:47.606Z,1544008247.606 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-05T11:10:47.606Z,1544008247.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:10:47.608Z,1544008247.608 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:10:47.609Z,1544008247.609 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-05T11:10:47.609Z,1544008247.609 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:10:47.623Z,1544008247.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:10:47.623Z,1544008247.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:10:48.013Z,1544008248.013 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:10:48.013Z,1544008248.013 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-05T11:10:48.014Z,1544008248.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:10:48.014Z,1544008248.014 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-05T11:10:48.401Z,1544008248.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:10:48.401Z,1544008248.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:10:48.401Z,1544008248.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:10:48.402Z,1544008248.402 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:10:48.402Z,1544008248.402 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:10:48.403Z,1544008248.403 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:10:53.625Z,1544008253.625 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T11:10:53.625Z,1544008253.625 [NAL9602] No Fault, FailCount= 5 2018-12-05T11:10:53.987Z,1544008253.987 [NAL9602](INFO): Powering up NAL9602 2018-12-05T11:11:05.180Z,1544008265.180 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:12:27.571Z,1544008347.571 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T11:07:26.9Z 2018-12-05T11:12:27.571Z,1544008347.571 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T11:12:27.571Z,1544008347.571 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T11:12:32.665Z,1544008352.665 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0660.lzma 2018-12-05T11:12:33.447Z,1544008353.447 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0660.lzma.bak 2018-12-05T11:12:33.447Z,1544008353.447 [DataOverHttps](INFO): SBD MOMSN=8968313 2018-12-05T11:12:42.832Z,1544008362.832 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T11:12:42.920Z,1544008362.920 [DataOverHttps](INFO): Sending 347 bytes from file Logs/20181203T211451/Express0661.lzma 2018-12-05T11:12:43.689Z,1544008363.689 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0661.lzma.bak 2018-12-05T11:12:43.689Z,1544008363.689 [DataOverHttps](INFO): SBD MOMSN=8968316 2018-12-05T11:12:45.033Z,1544008365.033 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T11:12:45.033Z,1544008365.033 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T11:12:45.034Z,1544008365.034 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T11:12:48.467Z,1544008368.467 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:12:48.467Z,1544008368.467 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-05T11:12:48.467Z,1544008368.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:12:48.469Z,1544008368.469 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:12:48.469Z,1544008368.469 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-05T11:12:48.469Z,1544008368.469 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:12:48.483Z,1544008368.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:12:48.483Z,1544008368.483 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:12:48.866Z,1544008368.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:12:48.866Z,1544008368.866 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-05T11:12:48.867Z,1544008368.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:12:48.867Z,1544008368.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-05T11:12:49.230Z,1544008369.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:12:49.230Z,1544008369.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:12:49.231Z,1544008369.231 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:12:49.231Z,1544008369.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:12:49.232Z,1544008369.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:12:49.232Z,1544008369.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:13:13.200Z,1544008393.200 [NAL9602](INFO): Powering down 2018-12-05T11:14:49.580Z,1544008489.580 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:14:49.580Z,1544008489.580 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-05T11:14:49.580Z,1544008489.580 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:14:49.582Z,1544008489.582 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:14:49.582Z,1544008489.582 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-05T11:14:49.582Z,1544008489.582 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:14:49.596Z,1544008489.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:14:49.596Z,1544008489.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:14:49.991Z,1544008489.991 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:14:49.991Z,1544008489.991 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-05T11:14:49.992Z,1544008489.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:14:49.992Z,1544008489.992 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-05T11:14:50.381Z,1544008490.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:14:50.381Z,1544008490.381 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:14:50.381Z,1544008490.381 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:14:50.382Z,1544008490.382 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:14:50.382Z,1544008490.382 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:14:50.383Z,1544008490.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:16:50.446Z,1544008610.446 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:16:50.446Z,1544008610.446 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-05T11:16:50.446Z,1544008610.446 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:16:50.449Z,1544008610.448 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:16:50.449Z,1544008610.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-05T11:16:50.449Z,1544008610.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:16:50.462Z,1544008610.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:16:50.462Z,1544008610.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:16:50.873Z,1544008610.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:16:50.873Z,1544008610.873 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-05T11:16:50.874Z,1544008610.874 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:16:50.874Z,1544008610.874 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-05T11:16:51.229Z,1544008611.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:16:51.230Z,1544008611.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:16:51.230Z,1544008611.230 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:16:51.231Z,1544008611.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:16:51.231Z,1544008611.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:16:51.232Z,1544008611.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:17:45.269Z,1544008665.269 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T11:17:45.269Z,1544008665.269 [Default:CheckIn:C.Wait] Stopped 2018-12-05T11:17:45.269Z,1544008665.269 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T11:17:45.269Z,1544008665.269 [Default:CheckIn:D] Running Loop=1 2018-12-05T11:17:45.669Z,1544008665.669 [Default:CheckIn:D] Stopped 2018-12-05T11:17:45.669Z,1544008665.669 [Default:CheckIn:E] Running Loop=1 2018-12-05T11:17:46.074Z,1544008666.074 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2282.894010 min 2018-12-05T11:17:46.074Z,1544008666.074 [Default:CheckIn:E] Stopped 2018-12-05T11:17:46.074Z,1544008666.074 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T11:17:46.075Z,1544008666.075 [Default:CheckIn] Stopped 2018-12-05T11:17:46.075Z,1544008666.075 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T11:17:46.075Z,1544008666.075 [Default:CheckIn](INFO): Running loop #222 2018-12-05T11:17:46.075Z,1544008666.075 [Default:CheckIn] Running Loop=222 2018-12-05T11:17:46.075Z,1544008666.075 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T11:17:46.075Z,1544008666.075 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T11:17:46.846Z,1544008666.846 [NAL9602](INFO): Powering up 2018-12-05T11:17:57.651Z,1544008677.651 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:18:29.596Z,1544008709.596 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T11:18:29.670Z,1544008709.670 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T11:18:29.670Z,1544008709.670 [NAL9602] Data Fault, FailCount= 1 2018-12-05T11:18:29.670Z,1544008709.670 [NAL9602](ERROR): Data Fault 2018-12-05T11:18:29.713Z,1544008709.713 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T11:18:29.996Z,1544008709.996 [NAL9602](INFO): Powering down 2018-12-05T11:18:30.845Z,1544008710.845 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T11:18:30.845Z,1544008710.845 [NAL9602] No Fault, FailCount= 1 2018-12-05T11:18:51.594Z,1544008731.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:18:51.594Z,1544008731.594 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-05T11:18:51.594Z,1544008731.594 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:18:51.596Z,1544008731.596 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:18:51.596Z,1544008731.596 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-05T11:18:51.597Z,1544008731.597 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:18:51.610Z,1544008731.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:18:51.610Z,1544008731.610 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:18:52.001Z,1544008732.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:18:52.002Z,1544008732.002 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-05T11:18:52.002Z,1544008732.002 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:18:52.003Z,1544008732.003 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-05T11:18:52.390Z,1544008732.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:18:52.390Z,1544008732.390 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:18:52.391Z,1544008732.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:18:52.391Z,1544008732.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:18:52.392Z,1544008732.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:18:52.392Z,1544008732.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:19:00.361Z,1544008740.361 [NAL9602](INFO): Powering up NAL9602 2018-12-05T11:19:11.564Z,1544008751.564 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:20:52.597Z,1544008852.597 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:20:52.597Z,1544008852.597 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-05T11:20:52.597Z,1544008852.597 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:20:52.599Z,1544008852.599 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:20:52.599Z,1544008852.599 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-05T11:20:52.599Z,1544008852.599 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:20:52.633Z,1544008852.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:20:52.634Z,1544008852.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:20:53.031Z,1544008853.031 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:20:53.031Z,1544008853.031 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-05T11:20:53.032Z,1544008853.032 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:20:53.032Z,1544008853.032 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-05T11:20:53.402Z,1544008853.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:20:53.403Z,1544008853.403 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:20:53.403Z,1544008853.403 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:20:53.403Z,1544008853.403 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:20:53.404Z,1544008853.404 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:20:53.404Z,1544008853.404 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:22:17.851Z,1544008937.851 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T11:22:17.851Z,1544008937.851 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T11:22:17.851Z,1544008937.851 [DropWeight](ERROR): Hardware Fault 2018-12-05T11:22:17.914Z,1544008937.914 [CBIT](INFO): Critical error at 20181205T112217 2018-12-05T11:22:17.921Z,1544008937.921 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T11:22:17.921Z,1544008937.921 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T11:22:18.300Z,1544008938.300 [CBIT](INFO): Critical error at 20181205T112217 2018-12-05T11:22:47.578Z,1544008967.578 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T11:17:46.1Z 2018-12-05T11:22:47.578Z,1544008967.578 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T11:22:47.578Z,1544008967.578 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T11:22:52.746Z,1544008972.746 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0663.lzma 2018-12-05T11:22:53.537Z,1544008973.537 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0663.lzma.bak 2018-12-05T11:22:53.537Z,1544008973.537 [DataOverHttps](INFO): SBD MOMSN=8968339 2018-12-05T11:22:53.610Z,1544008973.610 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:22:53.611Z,1544008973.611 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-05T11:22:53.611Z,1544008973.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:22:53.613Z,1544008973.613 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:22:53.613Z,1544008973.613 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-05T11:22:53.613Z,1544008973.613 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:22:53.643Z,1544008973.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:22:53.643Z,1544008973.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:22:54.903Z,1544008974.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:22:54.903Z,1544008974.903 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-05T11:22:54.903Z,1544008974.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:22:54.903Z,1544008974.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-05T11:22:54.998Z,1544008974.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:22:54.998Z,1544008974.998 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:22:54.999Z,1544008974.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:22:54.999Z,1544008974.999 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:22:54.000Z,1544008975.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:22:54.000Z,1544008975.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:23:03.400Z,1544008983.400 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T11:23:08.570Z,1544008988.570 [DataOverHttps](INFO): Sending 323 bytes from file Logs/20181203T211451/Express0664.lzma 2018-12-05T11:23:09.369Z,1544008989.369 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0664.lzma.bak 2018-12-05T11:23:09.370Z,1544008989.370 [DataOverHttps](INFO): SBD MOMSN=8968343 2018-12-05T11:23:10.722Z,1544008990.722 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T11:23:10.722Z,1544008990.722 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T11:23:10.722Z,1544008990.722 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T11:23:33.533Z,1544009013.533 [NAL9602](INFO): Powering down 2018-12-05T11:24:55.428Z,1544009095.428 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:24:55.428Z,1544009095.428 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-05T11:24:55.428Z,1544009095.428 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:24:55.430Z,1544009095.430 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:24:55.430Z,1544009095.430 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-05T11:24:55.430Z,1544009095.430 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:24:55.444Z,1544009095.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:24:55.444Z,1544009095.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:24:55.845Z,1544009095.845 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:24:55.845Z,1544009095.845 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-05T11:24:55.846Z,1544009095.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:24:55.846Z,1544009095.846 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-05T11:24:56.192Z,1544009096.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:24:56.193Z,1544009096.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:24:56.193Z,1544009096.193 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:24:56.193Z,1544009096.193 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:24:56.194Z,1544009096.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:24:56.194Z,1544009096.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:26:01.897Z,1544009161.897 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T11:26:56.244Z,1544009216.244 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:26:56.244Z,1544009216.244 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-05T11:26:56.245Z,1544009216.245 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:26:56.247Z,1544009216.247 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:26:56.247Z,1544009216.247 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-05T11:26:56.247Z,1544009216.247 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:26:56.261Z,1544009216.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:26:56.261Z,1544009216.261 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:26:56.666Z,1544009216.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:26:56.667Z,1544009216.667 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-05T11:26:56.667Z,1544009216.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:26:56.667Z,1544009216.667 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-05T11:26:57.046Z,1544009217.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:26:57.047Z,1544009217.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:26:57.047Z,1544009217.047 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:26:57.047Z,1544009217.047 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:26:57.048Z,1544009217.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:26:57.048Z,1544009217.048 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:28:11.000Z,1544009291.000 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T11:28:11.001Z,1544009291.001 [Default:CheckIn:C.Wait] Stopped 2018-12-05T11:28:11.001Z,1544009291.001 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T11:28:11.001Z,1544009291.001 [Default:CheckIn:D] Running Loop=1 2018-12-05T11:28:11.403Z,1544009291.403 [Default:CheckIn:D] Stopped 2018-12-05T11:28:11.403Z,1544009291.403 [Default:CheckIn:E] Running Loop=1 2018-12-05T11:28:11.806Z,1544009291.806 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2293.322917 min 2018-12-05T11:28:11.806Z,1544009291.806 [Default:CheckIn:E] Stopped 2018-12-05T11:28:11.806Z,1544009291.806 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T11:28:11.807Z,1544009291.807 [Default:CheckIn] Stopped 2018-12-05T11:28:11.807Z,1544009291.807 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T11:28:11.807Z,1544009291.807 [Default:CheckIn](INFO): Running loop #223 2018-12-05T11:28:11.807Z,1544009291.807 [Default:CheckIn] Running Loop=223 2018-12-05T11:28:11.807Z,1544009291.807 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T11:28:11.807Z,1544009291.807 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T11:28:12.575Z,1544009292.575 [NAL9602](INFO): Powering up 2018-12-05T11:28:23.776Z,1544009303.776 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:28:24.573Z,1544009304.573 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T11:28:24.573Z,1544009304.573 [NAL9602] Data Fault, FailCount= 2 2018-12-05T11:28:24.574Z,1544009304.574 [NAL9602](ERROR): Data Fault 2018-12-05T11:28:24.634Z,1544009304.634 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T11:28:24.975Z,1544009304.975 [NAL9602](INFO): Powering down 2018-12-05T11:28:25.819Z,1544009305.819 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T11:28:25.819Z,1544009305.819 [NAL9602] No Fault, FailCount= 2 2018-12-05T11:28:55.081Z,1544009335.081 [NAL9602](INFO): Powering up NAL9602 2018-12-05T11:28:57.114Z,1544009337.114 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:28:57.114Z,1544009337.114 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-05T11:28:57.114Z,1544009337.114 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:28:57.116Z,1544009337.116 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:28:57.117Z,1544009337.117 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-05T11:28:57.117Z,1544009337.117 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:28:57.167Z,1544009337.167 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:28:57.168Z,1544009337.168 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:28:57.518Z,1544009337.518 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:28:57.518Z,1544009337.518 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-05T11:28:57.519Z,1544009337.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:28:57.519Z,1544009337.519 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-05T11:28:57.914Z,1544009337.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:28:57.914Z,1544009337.914 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:28:57.915Z,1544009337.915 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:28:57.915Z,1544009337.915 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:28:57.915Z,1544009337.915 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:28:57.916Z,1544009337.916 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:29:07.039Z,1544009347.039 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:30:57.957Z,1544009457.957 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:30:57.957Z,1544009457.957 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-05T11:30:57.957Z,1544009457.957 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:30:57.959Z,1544009457.959 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:30:57.959Z,1544009457.959 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-05T11:30:57.960Z,1544009457.960 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:30:58.020Z,1544009458.020 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:30:58.021Z,1544009458.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:30:58.363Z,1544009458.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:30:58.363Z,1544009458.363 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-05T11:30:58.364Z,1544009458.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:30:58.364Z,1544009458.364 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-05T11:30:58.750Z,1544009458.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:30:58.750Z,1544009458.750 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:30:58.751Z,1544009458.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:30:58.751Z,1544009458.751 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:30:58.751Z,1544009458.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:30:58.752Z,1544009458.752 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:32:58.803Z,1544009578.803 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:32:58.803Z,1544009578.803 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-05T11:32:58.803Z,1544009578.803 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:32:58.805Z,1544009578.805 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:32:58.805Z,1544009578.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-05T11:32:58.805Z,1544009578.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:32:58.850Z,1544009578.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:32:58.850Z,1544009578.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:32:59.245Z,1544009579.245 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:32:59.245Z,1544009579.245 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-05T11:32:59.246Z,1544009579.246 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:32:59.246Z,1544009579.246 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-05T11:32:59.606Z,1544009579.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:32:59.607Z,1544009579.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:32:59.607Z,1544009579.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:32:59.607Z,1544009579.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:32:59.608Z,1544009579.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:32:59.608Z,1544009579.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:33:13.142Z,1544009593.142 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T11:28:11.8Z 2018-12-05T11:33:13.142Z,1544009593.142 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T11:33:13.142Z,1544009593.142 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T11:33:18.265Z,1544009598.265 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0666.lzma 2018-12-05T11:33:19.057Z,1544009599.057 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0666.lzma.bak 2018-12-05T11:33:19.057Z,1544009599.057 [DataOverHttps](INFO): SBD MOMSN=8968365 2018-12-05T11:33:28.527Z,1544009608.527 [DataOverHttps](INFO): Sending 314 bytes from file Logs/20181203T211451/Express0667.lzma 2018-12-05T11:33:29.297Z,1544009609.297 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0667.lzma.bak 2018-12-05T11:33:29.298Z,1544009609.298 [DataOverHttps](INFO): SBD MOMSN=8968367 2018-12-05T11:33:30.669Z,1544009610.669 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T11:33:30.669Z,1544009610.669 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T11:33:30.669Z,1544009610.669 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T11:34:10.463Z,1544009650.463 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T11:34:41.270Z,1544009681.270 [NAL9602](INFO): Powering down 2018-12-05T11:34:59.638Z,1544009699.638 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:34:59.638Z,1544009699.638 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-05T11:34:59.638Z,1544009699.638 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:34:59.640Z,1544009699.640 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:34:59.640Z,1544009699.640 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-05T11:34:59.640Z,1544009699.640 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:34:59.654Z,1544009699.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:34:59.654Z,1544009699.654 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:34:59.654Z,1544009699.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:34:59.655Z,1544009699.655 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:37:18.015Z,1544009838.015 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T11:37:18.015Z,1544009838.015 [DropWeight] No Fault, FailCount= 1 2018-12-05T11:38:30.826Z,1544009910.826 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T11:38:30.826Z,1544009910.826 [Default:CheckIn:C.Wait] Stopped 2018-12-05T11:38:30.826Z,1544009910.826 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T11:38:30.826Z,1544009910.826 [Default:CheckIn:D] Running Loop=1 2018-12-05T11:38:31.227Z,1544009911.227 [Default:CheckIn:D] Stopped 2018-12-05T11:38:31.227Z,1544009911.227 [Default:CheckIn:E] Running Loop=1 2018-12-05T11:38:31.631Z,1544009911.631 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2303.653385 min 2018-12-05T11:38:31.632Z,1544009911.632 [Default:CheckIn:E] Stopped 2018-12-05T11:38:31.632Z,1544009911.632 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T11:38:31.632Z,1544009911.632 [Default:CheckIn] Stopped 2018-12-05T11:38:31.632Z,1544009911.632 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T11:38:31.632Z,1544009911.632 [Default:CheckIn](INFO): Running loop #224 2018-12-05T11:38:31.632Z,1544009911.632 [Default:CheckIn] Running Loop=224 2018-12-05T11:38:31.632Z,1544009911.632 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T11:38:31.632Z,1544009911.632 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T11:38:32.398Z,1544009912.398 [NAL9602](INFO): Powering up 2018-12-05T11:38:43.200Z,1544009923.200 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:43:32.555Z,1544010212.555 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T11:38:31.6Z 2018-12-05T11:43:32.555Z,1544010212.555 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T11:43:32.556Z,1544010212.556 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T11:43:37.481Z,1544010217.481 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0669.lzma 2018-12-05T11:43:38.281Z,1544010218.281 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0669.lzma.bak 2018-12-05T11:43:38.281Z,1544010218.281 [DataOverHttps](INFO): SBD MOMSN=8968393 2018-12-05T11:43:47.693Z,1544010227.693 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T11:43:47.767Z,1544010227.767 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0670.lzma 2018-12-05T11:43:48.536Z,1544010228.536 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0670.lzma.bak 2018-12-05T11:43:48.536Z,1544010228.536 [DataOverHttps](INFO): SBD MOMSN=8968395 2018-12-05T11:43:49.897Z,1544010229.897 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T11:43:49.897Z,1544010229.897 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T11:43:49.897Z,1544010229.897 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T11:44:17.900Z,1544010257.900 [NAL9602](INFO): Powering down 2018-12-05T11:48:50.402Z,1544010530.402 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T11:48:50.403Z,1544010530.403 [Default:CheckIn:C.Wait] Stopped 2018-12-05T11:48:50.403Z,1544010530.403 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T11:48:50.403Z,1544010530.403 [Default:CheckIn:D] Running Loop=1 2018-12-05T11:48:50.806Z,1544010530.806 [Default:CheckIn:D] Stopped 2018-12-05T11:48:50.806Z,1544010530.806 [Default:CheckIn:E] Running Loop=1 2018-12-05T11:48:51.207Z,1544010531.207 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2313.979688 min 2018-12-05T11:48:51.207Z,1544010531.207 [Default:CheckIn:E] Stopped 2018-12-05T11:48:51.207Z,1544010531.207 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T11:48:51.207Z,1544010531.207 [Default:CheckIn] Stopped 2018-12-05T11:48:51.208Z,1544010531.208 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T11:48:51.208Z,1544010531.208 [Default:CheckIn](INFO): Running loop #225 2018-12-05T11:48:51.208Z,1544010531.208 [Default:CheckIn] Running Loop=225 2018-12-05T11:48:51.208Z,1544010531.208 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T11:48:51.208Z,1544010531.208 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T11:48:51.980Z,1544010531.980 [NAL9602](INFO): Powering up 2018-12-05T11:49:02.784Z,1544010542.784 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:49:03.580Z,1544010543.580 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T11:49:03.580Z,1544010543.580 [NAL9602] Data Fault, FailCount= 3 2018-12-05T11:49:03.580Z,1544010543.580 [NAL9602](ERROR): Data Fault 2018-12-05T11:49:03.636Z,1544010543.636 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T11:49:03.980Z,1544010543.980 [NAL9602](INFO): Powering down 2018-12-05T11:49:04.821Z,1544010544.821 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T11:49:04.822Z,1544010544.822 [NAL9602] No Fault, FailCount= 3 2018-12-05T11:49:34.095Z,1544010574.095 [NAL9602](INFO): Powering up NAL9602 2018-12-05T11:49:46.136Z,1544010586.136 [NAL9602](INFO): NAL9602 initialized 2018-12-05T11:49:59.780Z,1544010599.780 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:49:59.780Z,1544010599.780 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-05T11:49:59.781Z,1544010599.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:49:59.781Z,1544010599.781 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-05T11:50:00.174Z,1544010600.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:50:00.175Z,1544010600.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:50:00.175Z,1544010600.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:50:00.175Z,1544010600.175 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:50:00.176Z,1544010600.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:50:00.176Z,1544010600.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:52:00.494Z,1544010720.494 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:52:00.494Z,1544010720.494 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-05T11:52:00.494Z,1544010720.494 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:52:00.496Z,1544010720.496 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:52:00.496Z,1544010720.496 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-05T11:52:00.497Z,1544010720.497 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:52:00.567Z,1544010720.567 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:52:00.568Z,1544010720.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:52:00.902Z,1544010720.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:52:00.902Z,1544010720.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-05T11:52:00.902Z,1544010720.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:52:00.902Z,1544010720.902 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-05T11:52:01.291Z,1544010721.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:52:01.291Z,1544010721.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:52:01.292Z,1544010721.292 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:52:01.292Z,1544010721.292 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:52:01.292Z,1544010721.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:52:01.293Z,1544010721.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:53:52.168Z,1544010832.168 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T11:48:51.2Z 2018-12-05T11:53:52.168Z,1544010832.168 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T11:53:52.168Z,1544010832.168 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T11:53:57.129Z,1544010837.129 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0672.lzma 2018-12-05T11:53:57.930Z,1544010837.930 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0672.lzma.bak 2018-12-05T11:53:57.932Z,1544010837.932 [DataOverHttps](INFO): SBD MOMSN=8968410 2018-12-05T11:54:02.570Z,1544010842.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:54:02.570Z,1544010842.570 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-05T11:54:02.570Z,1544010842.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:54:02.572Z,1544010842.572 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:54:02.572Z,1544010842.572 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-05T11:54:02.572Z,1544010842.572 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:54:02.585Z,1544010842.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:54:02.586Z,1544010842.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:54:02.703Z,1544010842.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:54:02.703Z,1544010842.703 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-05T11:54:02.704Z,1544010842.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:54:02.704Z,1544010842.704 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-05T11:54:03.031Z,1544010843.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:54:03.031Z,1544010843.031 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:54:03.032Z,1544010843.032 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:54:03.032Z,1544010843.032 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:54:03.032Z,1544010843.033 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:54:03.033Z,1544010843.033 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:54:07.364Z,1544010847.364 [DataOverHttps](INFO): Sending 269 bytes from file Logs/20181203T211451/Express0673.lzma 2018-12-05T11:54:08.165Z,1544010848.165 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0673.lzma.bak 2018-12-05T11:54:08.166Z,1544010848.166 [DataOverHttps](INFO): SBD MOMSN=8968412 2018-12-05T11:54:09.550Z,1544010849.550 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T11:54:09.550Z,1544010849.550 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T11:54:09.550Z,1544010849.550 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T11:54:49.710Z,1544010889.710 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T11:55:20.516Z,1544010920.516 [NAL9602](INFO): Powering down 2018-12-05T11:56:03.330Z,1544010963.330 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:56:03.330Z,1544010963.330 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-05T11:56:03.331Z,1544010963.331 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:56:03.333Z,1544010963.333 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:56:03.333Z,1544010963.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-05T11:56:03.333Z,1544010963.333 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:56:03.346Z,1544010963.346 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:56:03.346Z,1544010963.346 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:56:03.735Z,1544010963.735 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:56:03.735Z,1544010963.735 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-05T11:56:03.736Z,1544010963.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:56:03.736Z,1544010963.736 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-05T11:56:04.125Z,1544010964.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:56:04.126Z,1544010964.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:56:04.127Z,1544010964.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:56:04.127Z,1544010964.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:56:04.127Z,1544010964.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:56:04.128Z,1544010964.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:58:04.150Z,1544011084.150 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:58:04.150Z,1544011084.150 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-05T11:58:04.151Z,1544011084.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T11:58:04.153Z,1544011084.153 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T11:58:04.153Z,1544011084.153 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-05T11:58:04.153Z,1544011084.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T11:58:04.191Z,1544011084.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T11:58:04.191Z,1544011084.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T11:58:04.551Z,1544011084.551 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T11:58:04.551Z,1544011084.551 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-05T11:58:04.552Z,1544011084.552 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T11:58:04.552Z,1544011084.552 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-05T11:58:04.946Z,1544011084.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T11:58:04.946Z,1544011084.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:58:04.947Z,1544011084.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:58:04.947Z,1544011084.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T11:58:04.947Z,1544011084.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T11:58:04.948Z,1544011084.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T11:59:09.758Z,1544011149.758 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T11:59:09.758Z,1544011149.758 [Default:CheckIn:C.Wait] Stopped 2018-12-05T11:59:09.758Z,1544011149.758 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T11:59:09.758Z,1544011149.758 [Default:CheckIn:D] Running Loop=1 2018-12-05T11:59:10.154Z,1544011150.154 [Default:CheckIn:D] Stopped 2018-12-05T11:59:10.154Z,1544011150.154 [Default:CheckIn:E] Running Loop=1 2018-12-05T11:59:10.549Z,1544011150.549 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2324.302083 min 2018-12-05T11:59:10.550Z,1544011150.550 [Default:CheckIn:E] Stopped 2018-12-05T11:59:10.550Z,1544011150.550 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T11:59:10.550Z,1544011150.550 [Default:CheckIn] Stopped 2018-12-05T11:59:10.550Z,1544011150.550 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T11:59:10.550Z,1544011150.550 [Default:CheckIn](INFO): Running loop #226 2018-12-05T11:59:10.550Z,1544011150.550 [Default:CheckIn] Running Loop=226 2018-12-05T11:59:10.550Z,1544011150.550 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T11:59:10.550Z,1544011150.550 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T11:59:11.335Z,1544011151.335 [NAL9602](INFO): Powering up 2018-12-05T11:59:22.535Z,1544011162.535 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:00:05.217Z,1544011205.217 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:00:05.217Z,1544011205.217 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-05T12:00:05.217Z,1544011205.217 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:00:05.220Z,1544011205.220 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:00:05.220Z,1544011205.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-05T12:00:05.220Z,1544011205.220 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:00:05.233Z,1544011205.233 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:00:05.234Z,1544011205.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:00:05.379Z,1544011205.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:00:05.379Z,1544011205.379 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-05T12:00:05.379Z,1544011205.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:00:05.379Z,1544011205.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-05T12:00:05.680Z,1544011205.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:00:05.681Z,1544011205.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:00:05.681Z,1544011205.681 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:00:05.681Z,1544011205.681 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:00:05.682Z,1544011205.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:00:05.682Z,1544011205.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:00:20.170Z,1544011220.170 [Reporter](INFO): platform_buoyancy_position 962.366583 cc 2018-12-05T12:02:05.862Z,1544011325.862 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:02:05.862Z,1544011325.862 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-05T12:02:05.862Z,1544011325.862 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:02:05.864Z,1544011325.864 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:02:05.864Z,1544011325.864 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-05T12:02:05.864Z,1544011325.864 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:02:05.877Z,1544011325.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:02:05.878Z,1544011325.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:02:06.279Z,1544011326.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:02:06.279Z,1544011326.279 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-05T12:02:06.280Z,1544011326.280 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:02:06.280Z,1544011326.280 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-05T12:02:06.666Z,1544011326.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:02:06.666Z,1544011326.666 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:02:06.667Z,1544011326.667 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:02:06.667Z,1544011326.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:02:06.668Z,1544011326.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:02:06.668Z,1544011326.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:04:06.709Z,1544011446.709 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:04:06.710Z,1544011446.710 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-05T12:04:06.710Z,1544011446.710 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:04:06.712Z,1544011446.712 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:04:06.712Z,1544011446.712 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-05T12:04:06.712Z,1544011446.712 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:04:06.727Z,1544011446.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:04:06.727Z,1544011446.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:04:07.142Z,1544011447.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:04:07.142Z,1544011447.142 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-05T12:04:07.151Z,1544011447.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:04:07.151Z,1544011447.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-05T12:04:07.510Z,1544011447.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:04:07.510Z,1544011447.510 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:04:07.511Z,1544011447.511 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:04:07.511Z,1544011447.511 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:04:07.511Z,1544011447.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:04:07.512Z,1544011447.512 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:04:11.867Z,1544011451.867 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T11:59:10.6Z 2018-12-05T12:04:11.867Z,1544011451.867 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T12:04:11.867Z,1544011451.867 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T12:04:16.876Z,1544011456.876 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0675.lzma 2018-12-05T12:04:17.669Z,1544011457.669 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0675.lzma.bak 2018-12-05T12:04:17.669Z,1544011457.669 [DataOverHttps](INFO): SBD MOMSN=8968426 2018-12-05T12:04:27.117Z,1544011467.117 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T12:04:27.203Z,1544011467.203 [DataOverHttps](INFO): Sending 298 bytes from file Logs/20181203T211451/Express0676.lzma 2018-12-05T12:04:27.989Z,1544011467.989 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0676.lzma.bak 2018-12-05T12:04:27.989Z,1544011467.989 [DataOverHttps](INFO): SBD MOMSN=8968428 2018-12-05T12:04:29.370Z,1544011469.370 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T12:04:29.370Z,1544011469.370 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T12:04:29.370Z,1544011469.370 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T12:04:57.563Z,1544011497.563 [NAL9602](INFO): Powering down 2018-12-05T12:06:07.585Z,1544011567.585 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:06:07.585Z,1544011567.585 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-05T12:06:07.585Z,1544011567.585 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:06:07.609Z,1544011567.609 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:06:07.610Z,1544011567.610 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-05T12:06:07.610Z,1544011567.610 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:06:07.623Z,1544011567.623 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:06:07.624Z,1544011567.624 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:06:07.974Z,1544011567.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:06:07.974Z,1544011567.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-05T12:06:07.975Z,1544011567.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:06:07.975Z,1544011567.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-05T12:06:08.356Z,1544011568.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:06:08.356Z,1544011568.356 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:06:08.357Z,1544011568.357 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:06:08.357Z,1544011568.357 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:06:08.357Z,1544011568.357 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:06:08.358Z,1544011568.358 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:07:19.199Z,1544011639.199 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T12:07:19.199Z,1544011639.199 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T12:07:19.199Z,1544011639.199 [DropWeight](ERROR): Hardware Fault 2018-12-05T12:07:19.260Z,1544011639.260 [CBIT](INFO): Critical error at 20181205T120719 2018-12-05T12:07:19.262Z,1544011639.262 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T12:07:19.263Z,1544011639.263 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T12:07:19.658Z,1544011639.658 [CBIT](INFO): Critical error at 20181205T120719 2018-12-05T12:08:08.456Z,1544011688.456 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:08:08.457Z,1544011688.457 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-05T12:08:08.457Z,1544011688.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:08:08.459Z,1544011688.459 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:08:08.459Z,1544011688.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-05T12:08:08.459Z,1544011688.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:08:08.472Z,1544011688.472 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:08:08.473Z,1544011688.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:08:08.869Z,1544011688.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:08:08.869Z,1544011688.869 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-05T12:08:08.870Z,1544011688.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:08:08.870Z,1544011688.870 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-05T12:08:09.262Z,1544011689.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:08:09.263Z,1544011689.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:08:09.263Z,1544011689.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:08:09.263Z,1544011689.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:08:09.264Z,1544011689.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:08:09.264Z,1544011689.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:09:29.551Z,1544011769.551 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T12:09:29.552Z,1544011769.552 [Default:CheckIn:C.Wait] Stopped 2018-12-05T12:09:29.552Z,1544011769.552 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T12:09:29.552Z,1544011769.552 [Default:CheckIn:D] Running Loop=1 2018-12-05T12:09:29.950Z,1544011769.950 [Default:CheckIn:D] Stopped 2018-12-05T12:09:29.950Z,1544011769.950 [Default:CheckIn:E] Running Loop=1 2018-12-05T12:09:30.352Z,1544011770.352 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2334.632031 min 2018-12-05T12:09:30.352Z,1544011770.352 [Default:CheckIn:E] Stopped 2018-12-05T12:09:30.352Z,1544011770.352 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T12:09:30.352Z,1544011770.352 [Default:CheckIn] Stopped 2018-12-05T12:09:30.352Z,1544011770.352 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T12:09:30.353Z,1544011770.353 [Default:CheckIn](INFO): Running loop #227 2018-12-05T12:09:30.353Z,1544011770.353 [Default:CheckIn] Running Loop=227 2018-12-05T12:09:30.353Z,1544011770.353 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T12:09:30.353Z,1544011770.353 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T12:09:31.127Z,1544011771.127 [NAL9602](INFO): Powering up 2018-12-05T12:09:41.935Z,1544011781.935 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:09:42.730Z,1544011782.730 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T12:09:42.730Z,1544011782.730 [NAL9602] Data Fault, FailCount= 4 2018-12-05T12:09:42.731Z,1544011782.731 [NAL9602](ERROR): Data Fault 2018-12-05T12:09:42.766Z,1544011782.766 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T12:09:43.130Z,1544011783.130 [NAL9602](INFO): Powering down 2018-12-05T12:09:43.000Z,1544011784.000 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T12:09:43.000Z,1544011784.000 [NAL9602] No Fault, FailCount= 4 2018-12-05T12:10:09.538Z,1544011809.538 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:10:09.538Z,1544011809.538 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-05T12:10:09.538Z,1544011809.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:10:09.540Z,1544011809.540 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:10:09.540Z,1544011809.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-05T12:10:09.541Z,1544011809.541 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:10:09.612Z,1544011809.612 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:10:09.612Z,1544011809.612 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:10:09.946Z,1544011809.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:10:09.947Z,1544011809.947 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-05T12:10:09.947Z,1544011809.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:10:09.947Z,1544011809.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-05T12:10:10.333Z,1544011810.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:10:10.333Z,1544011810.333 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:10:10.334Z,1544011810.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:10:10.334Z,1544011810.334 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:10:10.335Z,1544011810.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:10:10.335Z,1544011810.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:10:13.509Z,1544011813.509 [NAL9602](INFO): Powering up NAL9602 2018-12-05T12:10:25.226Z,1544011825.226 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:12:10.398Z,1544011930.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:12:10.399Z,1544011930.399 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-05T12:12:10.399Z,1544011930.399 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:12:10.401Z,1544011930.401 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:12:10.401Z,1544011930.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-05T12:12:10.401Z,1544011930.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:12:10.416Z,1544011930.416 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:12:10.416Z,1544011930.416 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:12:10.536Z,1544011930.536 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:12:10.536Z,1544011930.536 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-05T12:12:10.536Z,1544011930.536 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:12:10.537Z,1544011930.537 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-05T12:12:10.867Z,1544011930.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:12:10.868Z,1544011930.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:12:10.868Z,1544011930.868 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:12:10.868Z,1544011930.868 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:12:10.869Z,1544011930.869 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:12:10.869Z,1544011930.869 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:14:11.105Z,1544012051.105 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:14:11.105Z,1544012051.105 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-05T12:14:11.105Z,1544012051.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:14:11.107Z,1544012051.107 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:14:11.107Z,1544012051.107 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-05T12:14:11.107Z,1544012051.107 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:14:11.120Z,1544012051.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:14:11.121Z,1544012051.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:14:11.534Z,1544012051.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:14:11.534Z,1544012051.534 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-05T12:14:11.535Z,1544012051.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:14:11.535Z,1544012051.535 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-05T12:14:11.917Z,1544012051.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:14:11.918Z,1544012051.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:14:11.918Z,1544012051.918 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:14:11.918Z,1544012051.918 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:14:11.919Z,1544012051.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:14:11.919Z,1544012051.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:14:31.438Z,1544012071.438 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T12:09:30.4Z 2018-12-05T12:14:31.438Z,1544012071.438 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T12:14:31.439Z,1544012071.439 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T12:14:36.396Z,1544012076.396 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0678.lzma 2018-12-05T12:14:37.198Z,1544012077.198 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0678.lzma.bak 2018-12-05T12:14:37.199Z,1544012077.199 [DataOverHttps](INFO): SBD MOMSN=8968452 2018-12-05T12:14:46.799Z,1544012086.799 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0679.lzma 2018-12-05T12:14:47.597Z,1544012087.597 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0679.lzma.bak 2018-12-05T12:14:47.597Z,1544012087.597 [DataOverHttps](INFO): SBD MOMSN=8968456 2018-12-05T12:14:48.974Z,1544012088.974 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T12:14:48.974Z,1544012088.974 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T12:14:48.974Z,1544012088.974 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T12:15:27.666Z,1544012127.666 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T12:15:58.135Z,1544012158.135 [NAL9602](INFO): Powering down 2018-12-05T12:16:12.147Z,1544012172.147 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:16:12.147Z,1544012172.147 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-05T12:16:12.147Z,1544012172.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:16:12.149Z,1544012172.149 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:16:12.149Z,1544012172.149 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-05T12:16:12.149Z,1544012172.149 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:16:12.163Z,1544012172.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:16:12.163Z,1544012172.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:16:12.554Z,1544012172.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:16:12.554Z,1544012172.554 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-05T12:16:12.555Z,1544012172.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:16:12.555Z,1544012172.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-05T12:16:12.930Z,1544012172.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:16:12.930Z,1544012172.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:16:12.931Z,1544012172.931 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:16:12.931Z,1544012172.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:16:12.931Z,1544012172.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:16:12.932Z,1544012172.932 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:18:12.945Z,1544012292.945 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:18:12.945Z,1544012292.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-05T12:18:12.946Z,1544012292.946 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:18:12.960Z,1544012292.960 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:18:13.340Z,1544012293.340 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:18:13.340Z,1544012293.340 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-05T12:18:13.340Z,1544012293.340 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:18:13.354Z,1544012293.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:18:13.354Z,1544012293.354 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:18:13.354Z,1544012293.354 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-05T12:18:13.730Z,1544012293.730 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:18:13.731Z,1544012293.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:18:13.731Z,1544012293.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:18:13.760Z,1544012293.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:18:13.760Z,1544012293.760 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-05T12:18:14.134Z,1544012294.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:18:14.147Z,1544012294.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:18:14.148Z,1544012294.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:19:49.414Z,1544012389.414 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T12:19:49.414Z,1544012389.414 [Default:CheckIn:C.Wait] Stopped 2018-12-05T12:19:49.414Z,1544012389.414 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T12:19:49.414Z,1544012389.414 [Default:CheckIn:D] Running Loop=1 2018-12-05T12:19:49.808Z,1544012389.808 [Default:CheckIn:D] Stopped 2018-12-05T12:19:49.808Z,1544012389.808 [Default:CheckIn:E] Running Loop=1 2018-12-05T12:19:50.211Z,1544012390.211 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2344.963021 min 2018-12-05T12:19:50.211Z,1544012390.211 [Default:CheckIn:E] Stopped 2018-12-05T12:19:50.211Z,1544012390.211 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T12:19:50.211Z,1544012390.211 [Default:CheckIn] Stopped 2018-12-05T12:19:50.211Z,1544012390.211 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T12:19:50.211Z,1544012390.211 [Default:CheckIn](INFO): Running loop #228 2018-12-05T12:19:50.212Z,1544012390.212 [Default:CheckIn] Running Loop=228 2018-12-05T12:19:50.212Z,1544012390.212 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T12:19:50.212Z,1544012390.212 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T12:19:50.977Z,1544012390.977 [NAL9602](INFO): Powering up 2018-12-05T12:20:02.180Z,1544012402.180 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:20:13.762Z,1544012413.762 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:20:13.762Z,1544012413.762 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-05T12:20:13.762Z,1544012413.762 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:20:13.777Z,1544012413.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:20:14.162Z,1544012414.162 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:20:14.163Z,1544012414.163 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-05T12:20:14.163Z,1544012414.163 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:20:14.176Z,1544012414.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:20:14.177Z,1544012414.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:20:14.177Z,1544012414.177 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-05T12:20:14.568Z,1544012414.568 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:20:14.568Z,1544012414.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:20:14.569Z,1544012414.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:20:14.582Z,1544012414.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:20:14.582Z,1544012414.582 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-05T12:20:14.960Z,1544012414.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:20:14.960Z,1544012414.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:20:14.960Z,1544012414.960 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:20:34.136Z,1544012434.136 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T12:20:34.214Z,1544012434.214 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T12:20:34.214Z,1544012434.214 [NAL9602] Data Fault, FailCount= 5 2018-12-05T12:20:34.214Z,1544012434.214 [NAL9602](ERROR): Data Fault 2018-12-05T12:20:34.257Z,1544012434.257 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T12:20:34.257Z,1544012434.257 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T12:20:34.535Z,1544012434.535 [NAL9602](INFO): Powering down 2018-12-05T12:20:34.580Z,1544012434.580 [CBIT](INFO): Critical error at 20181205T122034 2018-12-05T12:22:14.959Z,1544012534.959 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:22:14.960Z,1544012534.960 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-05T12:22:14.960Z,1544012534.960 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:22:14.974Z,1544012534.974 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:22:15.362Z,1544012535.362 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:22:15.362Z,1544012535.362 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-05T12:22:15.363Z,1544012535.363 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:22:15.376Z,1544012535.376 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:22:15.376Z,1544012535.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:22:15.376Z,1544012535.376 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-05T12:22:15.762Z,1544012535.762 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:22:15.763Z,1544012535.763 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:22:15.763Z,1544012535.763 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:22:15.776Z,1544012535.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:22:15.776Z,1544012535.776 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-05T12:22:16.162Z,1544012536.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:22:16.162Z,1544012536.162 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:22:16.163Z,1544012536.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:22:19.376Z,1544012539.376 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T12:22:19.376Z,1544012539.376 [DropWeight] No Fault, FailCount= 1 2018-12-05T12:22:34.232Z,1544012554.232 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T12:22:34.232Z,1544012554.232 [NAL9602] No Fault, FailCount= 5 2018-12-05T12:22:34.590Z,1544012554.590 [NAL9602](INFO): Powering up NAL9602 2018-12-05T12:22:45.792Z,1544012565.792 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:22:46.590Z,1544012566.590 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T12:22:46.590Z,1544012566.590 [NAL9602] Data Fault, FailCount= 1 2018-12-05T12:22:46.590Z,1544012566.590 [NAL9602](ERROR): Data Fault 2018-12-05T12:22:46.661Z,1544012566.661 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T12:22:46.992Z,1544012566.992 [NAL9602](INFO): Powering down 2018-12-05T12:22:47.828Z,1544012567.828 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T12:22:47.828Z,1544012567.828 [NAL9602] No Fault, FailCount= 1 2018-12-05T12:23:17.352Z,1544012597.352 [NAL9602](INFO): Powering up NAL9602 2018-12-05T12:23:28.556Z,1544012608.556 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:24:15.768Z,1544012655.768 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:24:15.768Z,1544012655.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-05T12:24:15.768Z,1544012655.768 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:24:15.782Z,1544012655.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:24:16.152Z,1544012656.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:24:16.152Z,1544012656.152 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-05T12:24:16.534Z,1544012656.534 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:24:16.534Z,1544012656.534 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-05T12:24:16.535Z,1544012656.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:24:16.536Z,1544012656.536 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:24:16.537Z,1544012656.537 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:24:16.537Z,1544012656.537 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:24:16.550Z,1544012656.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:24:16.947Z,1544012656.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:24:16.948Z,1544012656.948 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-05T12:24:17.338Z,1544012657.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:24:17.338Z,1544012657.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:24:17.339Z,1544012657.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:24:50.999Z,1544012690.999 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T12:19:50.2Z 2018-12-05T12:24:50.999Z,1544012690.999 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T12:24:50.999Z,1544012690.999 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T12:24:55.986Z,1544012695.986 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0681.lzma 2018-12-05T12:24:56.786Z,1544012696.786 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0681.lzma.bak 2018-12-05T12:24:56.786Z,1544012696.786 [DataOverHttps](INFO): SBD MOMSN=8968480 2018-12-05T12:25:06.199Z,1544012706.199 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T12:25:06.274Z,1544012706.274 [DataOverHttps](INFO): Sending 346 bytes from file Logs/20181203T211451/Express0682.lzma 2018-12-05T12:25:07.045Z,1544012707.045 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0682.lzma.bak 2018-12-05T12:25:07.045Z,1544012707.045 [DataOverHttps](INFO): SBD MOMSN=8968483 2018-12-05T12:25:08.431Z,1544012708.431 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T12:25:08.431Z,1544012708.431 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T12:25:08.431Z,1544012708.431 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T12:25:36.499Z,1544012736.499 [NAL9602](INFO): Powering down 2018-12-05T12:26:16.873Z,1544012776.873 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:26:16.874Z,1544012776.874 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-05T12:26:16.874Z,1544012776.874 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:26:16.900Z,1544012776.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:26:17.316Z,1544012777.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:26:17.316Z,1544012777.316 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-05T12:26:17.672Z,1544012777.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:26:17.672Z,1544012777.672 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-05T12:26:17.672Z,1544012777.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:26:17.674Z,1544012777.674 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:26:17.675Z,1544012777.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:26:17.675Z,1544012777.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:26:17.710Z,1544012777.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:26:18.088Z,1544012778.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:26:18.088Z,1544012778.088 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-05T12:26:18.482Z,1544012778.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:26:18.482Z,1544012778.482 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:26:18.483Z,1544012778.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:28:17.919Z,1544012897.919 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:28:17.920Z,1544012897.920 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-05T12:28:17.920Z,1544012897.920 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:28:17.974Z,1544012897.974 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:28:18.320Z,1544012898.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:28:18.320Z,1544012898.320 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-05T12:28:18.702Z,1544012898.702 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:28:18.702Z,1544012898.702 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-05T12:28:18.702Z,1544012898.702 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:28:18.704Z,1544012898.704 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:28:18.705Z,1544012898.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:28:18.705Z,1544012898.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:28:18.718Z,1544012898.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:28:19.119Z,1544012899.119 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:28:19.119Z,1544012899.119 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-05T12:28:19.502Z,1544012899.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:28:19.503Z,1544012899.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:28:19.503Z,1544012899.503 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:30:08.719Z,1544013008.719 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T12:30:08.719Z,1544013008.719 [Default:CheckIn:C.Wait] Stopped 2018-12-05T12:30:08.719Z,1544013008.719 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T12:30:08.719Z,1544013008.719 [Default:CheckIn:D] Running Loop=1 2018-12-05T12:30:09.105Z,1544013009.105 [Default:CheckIn:D] Stopped 2018-12-05T12:30:09.106Z,1544013009.106 [Default:CheckIn:E] Running Loop=1 2018-12-05T12:30:09.502Z,1544013009.502 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2355.284635 min 2018-12-05T12:30:09.502Z,1544013009.502 [Default:CheckIn:E] Stopped 2018-12-05T12:30:09.503Z,1544013009.503 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T12:30:09.503Z,1544013009.503 [Default:CheckIn] Stopped 2018-12-05T12:30:09.503Z,1544013009.503 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T12:30:09.503Z,1544013009.503 [Default:CheckIn](INFO): Running loop #229 2018-12-05T12:30:09.503Z,1544013009.503 [Default:CheckIn] Running Loop=229 2018-12-05T12:30:09.503Z,1544013009.503 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T12:30:09.503Z,1544013009.503 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T12:30:10.275Z,1544013010.275 [NAL9602](INFO): Powering up 2018-12-05T12:30:18.711Z,1544013018.711 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:30:18.711Z,1544013018.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-05T12:30:18.712Z,1544013018.712 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:30:18.726Z,1544013018.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:30:19.120Z,1544013019.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:30:19.120Z,1544013019.120 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-05T12:30:19.569Z,1544013019.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:30:19.569Z,1544013019.569 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-05T12:30:19.570Z,1544013019.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:30:19.571Z,1544013019.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:30:19.572Z,1544013019.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:30:19.572Z,1544013019.572 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:30:19.586Z,1544013019.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:30:19.992Z,1544013019.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:30:19.992Z,1544013019.992 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-05T12:30:20.331Z,1544013020.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:30:20.331Z,1544013020.331 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:30:20.332Z,1544013020.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:30:21.476Z,1544013021.476 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:32:19.907Z,1544013139.907 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:32:19.907Z,1544013139.907 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-05T12:32:19.907Z,1544013139.907 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:32:19.978Z,1544013139.978 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:32:20.244Z,1544013140.244 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:32:20.245Z,1544013140.245 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-05T12:32:20.611Z,1544013140.611 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:32:20.611Z,1544013140.611 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-05T12:32:20.611Z,1544013140.611 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:32:20.613Z,1544013140.613 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:32:20.613Z,1544013140.613 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:32:20.614Z,1544013140.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:32:20.654Z,1544013140.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:32:21.039Z,1544013141.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:32:21.039Z,1544013141.039 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-05T12:32:21.383Z,1544013141.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:32:21.383Z,1544013141.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:32:21.383Z,1544013141.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:33:28.766Z,1544013208.766 [BPC1](INFO): Calculating totals. Valid battery stick count: 53. Valid reserve battery stick count: 6. 2018-12-05T12:34:20.772Z,1544013260.772 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:34:20.772Z,1544013260.772 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-05T12:34:20.772Z,1544013260.772 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:34:20.814Z,1544013260.814 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:34:21.208Z,1544013261.208 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:34:21.208Z,1544013261.208 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-05T12:34:21.578Z,1544013261.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:34:21.578Z,1544013261.578 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-05T12:34:21.578Z,1544013261.578 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:34:21.580Z,1544013261.580 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:34:21.580Z,1544013261.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:34:21.581Z,1544013261.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:34:21.630Z,1544013261.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:34:21.987Z,1544013261.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:34:21.987Z,1544013261.987 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-05T12:34:22.394Z,1544013262.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:34:22.408Z,1544013262.408 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:34:22.409Z,1544013262.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:35:11.127Z,1544013311.127 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T12:30:09.5Z 2018-12-05T12:35:11.128Z,1544013311.128 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T12:35:11.128Z,1544013311.128 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T12:35:16.064Z,1544013316.064 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0684.lzma 2018-12-05T12:35:16.865Z,1544013316.865 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0684.lzma.bak 2018-12-05T12:35:16.865Z,1544013316.865 [DataOverHttps](INFO): SBD MOMSN=8968506 2018-12-05T12:35:26.607Z,1544013326.607 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T12:35:26.691Z,1544013326.691 [DataOverHttps](INFO): Sending 293 bytes from file Logs/20181203T211451/Express0685.lzma 2018-12-05T12:35:27.461Z,1544013327.461 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0685.lzma.bak 2018-12-05T12:35:27.461Z,1544013327.461 [DataOverHttps](INFO): SBD MOMSN=8968508 2018-12-05T12:35:28.804Z,1544013328.804 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T12:35:28.804Z,1544013328.804 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T12:35:28.804Z,1544013328.804 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T12:35:56.780Z,1544013356.780 [NAL9602](INFO): Powering down 2018-12-05T12:36:21.715Z,1544013381.715 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:36:21.715Z,1544013381.715 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-05T12:36:21.715Z,1544013381.715 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:36:21.730Z,1544013381.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:36:22.132Z,1544013382.132 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:36:22.132Z,1544013382.132 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-05T12:36:22.522Z,1544013382.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:36:22.522Z,1544013382.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-05T12:36:22.522Z,1544013382.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:36:22.523Z,1544013382.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:36:22.524Z,1544013382.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:36:22.524Z,1544013382.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:36:22.538Z,1544013382.538 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:36:22.933Z,1544013382.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:36:22.933Z,1544013382.933 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-05T12:36:23.326Z,1544013383.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:36:23.326Z,1544013383.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:36:23.327Z,1544013383.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:38:22.899Z,1544013502.899 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:38:22.899Z,1544013502.899 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-05T12:38:22.899Z,1544013502.899 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:38:22.913Z,1544013502.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:38:23.319Z,1544013503.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:38:23.320Z,1544013503.320 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-05T12:38:23.703Z,1544013503.703 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:38:23.703Z,1544013503.703 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-05T12:38:23.703Z,1544013503.703 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:38:23.705Z,1544013503.705 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:38:23.705Z,1544013503.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:38:23.705Z,1544013503.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:38:23.718Z,1544013503.718 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:38:24.114Z,1544013504.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:38:24.114Z,1544013504.114 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-05T12:38:24.499Z,1544013504.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:38:24.499Z,1544013504.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:38:24.499Z,1544013504.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:40:23.814Z,1544013623.815 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:40:23.815Z,1544013623.815 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-05T12:40:23.815Z,1544013623.815 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:40:23.829Z,1544013623.829 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:40:24.231Z,1544013624.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:40:24.231Z,1544013624.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-05T12:40:24.612Z,1544013624.612 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:40:24.612Z,1544013624.612 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-05T12:40:24.613Z,1544013624.613 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:40:24.614Z,1544013624.614 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:40:24.615Z,1544013624.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:40:24.615Z,1544013624.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:40:24.628Z,1544013624.628 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:40:25.028Z,1544013625.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:40:25.028Z,1544013625.028 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-05T12:40:25.418Z,1544013625.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:40:25.418Z,1544013625.418 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:40:25.419Z,1544013625.419 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:40:29.014Z,1544013629.014 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T12:40:29.014Z,1544013629.014 [Default:CheckIn:C.Wait] Stopped 2018-12-05T12:40:29.014Z,1544013629.014 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T12:40:29.015Z,1544013629.015 [Default:CheckIn:D] Running Loop=1 2018-12-05T12:40:29.422Z,1544013629.422 [Default:CheckIn:D] Stopped 2018-12-05T12:40:29.422Z,1544013629.422 [Default:CheckIn:E] Running Loop=1 2018-12-05T12:40:29.822Z,1544013629.822 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2365.623437 min 2018-12-05T12:40:29.822Z,1544013629.822 [Default:CheckIn:E] Stopped 2018-12-05T12:40:29.822Z,1544013629.822 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T12:40:29.822Z,1544013629.822 [Default:CheckIn] Stopped 2018-12-05T12:40:29.823Z,1544013629.823 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T12:40:29.823Z,1544013629.823 [Default:CheckIn](INFO): Running loop #230 2018-12-05T12:40:29.823Z,1544013629.823 [Default:CheckIn] Running Loop=230 2018-12-05T12:40:29.823Z,1544013629.823 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T12:40:29.823Z,1544013629.823 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T12:40:30.585Z,1544013630.585 [NAL9602](INFO): Powering up 2018-12-05T12:40:41.388Z,1544013641.388 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:40:42.188Z,1544013642.188 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T12:40:42.188Z,1544013642.188 [NAL9602] Data Fault, FailCount= 2 2018-12-05T12:40:42.188Z,1544013642.188 [NAL9602](ERROR): Data Fault 2018-12-05T12:40:42.247Z,1544013642.247 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T12:40:42.588Z,1544013642.588 [NAL9602](INFO): Powering down 2018-12-05T12:40:43.432Z,1544013643.432 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T12:40:43.432Z,1544013643.432 [NAL9602] No Fault, FailCount= 2 2018-12-05T12:41:12.945Z,1544013672.945 [NAL9602](INFO): Powering up NAL9602 2018-12-05T12:41:24.900Z,1544013684.900 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:42:24.673Z,1544013744.673 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:42:24.674Z,1544013744.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-05T12:42:24.674Z,1544013744.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:42:24.720Z,1544013744.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:42:25.116Z,1544013745.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:42:25.116Z,1544013745.116 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-05T12:42:25.503Z,1544013745.503 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:42:25.503Z,1544013745.503 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-05T12:42:25.504Z,1544013745.504 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:42:25.505Z,1544013745.505 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:42:25.506Z,1544013745.506 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:42:25.506Z,1544013745.506 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:42:25.519Z,1544013745.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:42:25.919Z,1544013745.919 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:42:25.919Z,1544013745.919 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-05T12:42:26.301Z,1544013746.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:42:26.302Z,1544013746.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:42:26.302Z,1544013746.302 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:44:25.519Z,1544013865.519 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:44:25.520Z,1544013865.520 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-05T12:44:25.520Z,1544013865.520 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:44:25.534Z,1544013865.534 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:44:25.926Z,1544013865.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:44:25.926Z,1544013865.926 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-05T12:44:26.318Z,1544013866.318 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:44:26.318Z,1544013866.318 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-05T12:44:26.318Z,1544013866.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:44:26.320Z,1544013866.320 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:44:26.321Z,1544013866.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:44:26.321Z,1544013866.321 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:44:26.334Z,1544013866.334 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:44:26.722Z,1544013866.722 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:44:26.722Z,1544013866.722 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-05T12:44:27.102Z,1544013867.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:44:27.102Z,1544013867.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:44:27.103Z,1544013867.103 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:45:31.148Z,1544013931.148 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T12:40:29.8Z 2018-12-05T12:45:31.148Z,1544013931.148 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T12:45:31.148Z,1544013931.148 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T12:45:36.225Z,1544013936.225 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0687.lzma 2018-12-05T12:45:37.018Z,1544013937.018 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0687.lzma.bak 2018-12-05T12:45:37.018Z,1544013937.018 [DataOverHttps](INFO): SBD MOMSN=8968529 2018-12-05T12:45:46.436Z,1544013946.436 [DataOverHttps](INFO): Sending 310 bytes from file Logs/20181203T211451/Express0688.lzma 2018-12-05T12:45:47.233Z,1544013947.233 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0688.lzma.bak 2018-12-05T12:45:47.233Z,1544013947.233 [DataOverHttps](INFO): SBD MOMSN=8968531 2018-12-05T12:45:48.605Z,1544013948.605 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T12:45:48.605Z,1544013948.605 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T12:45:48.605Z,1544013948.605 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T12:46:27.529Z,1544013987.529 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:46:27.529Z,1544013987.529 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-05T12:46:27.529Z,1544013987.529 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:46:27.531Z,1544013987.531 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:46:27.531Z,1544013987.531 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-05T12:46:27.531Z,1544013987.531 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:46:27.546Z,1544013987.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:46:27.547Z,1544013987.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:46:27.658Z,1544013987.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:46:27.658Z,1544013987.658 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-05T12:46:27.667Z,1544013987.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:46:27.667Z,1544013987.667 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-05T12:46:27.998Z,1544013987.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:46:27.999Z,1544013987.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:46:27.999Z,1544013987.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:46:27.999Z,1544013987.999 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:46:27.000Z,1544013988.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:46:28.000Z,1544013988.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:46:28.364Z,1544013988.364 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T12:46:59.160Z,1544014019.160 [NAL9602](INFO): Powering down 2018-12-05T12:48:28.295Z,1544014108.295 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:48:28.295Z,1544014108.295 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-05T12:48:28.295Z,1544014108.295 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:48:28.297Z,1544014108.297 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:48:28.297Z,1544014108.297 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-05T12:48:28.297Z,1544014108.297 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:48:28.342Z,1544014108.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:48:28.342Z,1544014108.342 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:48:28.725Z,1544014108.725 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:48:28.725Z,1544014108.725 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-05T12:48:28.726Z,1544014108.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:48:28.726Z,1544014108.726 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-05T12:48:29.094Z,1544014109.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:48:29.095Z,1544014109.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:48:29.095Z,1544014109.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:48:29.095Z,1544014109.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:48:29.096Z,1544014109.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:48:29.096Z,1544014109.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:50:29.220Z,1544014229.220 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:50:29.220Z,1544014229.220 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-05T12:50:29.221Z,1544014229.221 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:50:29.223Z,1544014229.223 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:50:29.223Z,1544014229.223 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-05T12:50:29.223Z,1544014229.223 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:50:29.236Z,1544014229.236 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:50:29.237Z,1544014229.237 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:50:29.631Z,1544014229.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:50:29.631Z,1544014229.631 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-05T12:50:29.632Z,1544014229.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:50:29.632Z,1544014229.632 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-05T12:50:30.024Z,1544014230.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:50:30.025Z,1544014230.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:50:30.025Z,1544014230.025 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:50:30.026Z,1544014230.026 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:50:30.026Z,1544014230.026 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:50:30.027Z,1544014230.027 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:50:48.774Z,1544014248.774 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T12:50:48.774Z,1544014248.774 [Default:CheckIn:C.Wait] Stopped 2018-12-05T12:50:48.774Z,1544014248.774 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T12:50:48.774Z,1544014248.774 [Default:CheckIn:D] Running Loop=1 2018-12-05T12:50:49.175Z,1544014249.175 [Default:CheckIn:D] Stopped 2018-12-05T12:50:49.175Z,1544014249.175 [Default:CheckIn:E] Running Loop=1 2018-12-05T12:50:49.578Z,1544014249.578 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2375.952604 min 2018-12-05T12:50:49.603Z,1544014249.603 [Default:CheckIn:E] Stopped 2018-12-05T12:50:49.603Z,1544014249.603 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T12:50:49.603Z,1544014249.603 [Default:CheckIn] Stopped 2018-12-05T12:50:49.603Z,1544014249.603 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T12:50:49.603Z,1544014249.603 [Default:CheckIn](INFO): Running loop #231 2018-12-05T12:50:49.603Z,1544014249.603 [Default:CheckIn] Running Loop=231 2018-12-05T12:50:49.604Z,1544014249.604 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T12:50:49.604Z,1544014249.604 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T12:50:50.351Z,1544014250.351 [NAL9602](INFO): Powering up 2018-12-05T12:51:01.576Z,1544014261.576 [NAL9602](INFO): NAL9602 initialized 2018-12-05T12:52:20.849Z,1544014340.849 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T12:52:20.849Z,1544014340.849 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T12:52:20.849Z,1544014340.849 [DropWeight](ERROR): Hardware Fault 2018-12-05T12:52:20.919Z,1544014340.919 [CBIT](INFO): Critical error at 20181205T125220 2018-12-05T12:52:20.922Z,1544014340.922 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T12:52:20.926Z,1544014340.926 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T12:52:21.294Z,1544014341.294 [CBIT](INFO): Critical error at 20181205T125220 2018-12-05T12:52:30.095Z,1544014350.095 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:52:30.095Z,1544014350.095 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-05T12:52:30.095Z,1544014350.095 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:52:30.097Z,1544014350.097 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:52:30.097Z,1544014350.097 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-05T12:52:30.097Z,1544014350.097 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:52:30.138Z,1544014350.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:52:30.139Z,1544014350.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:52:30.503Z,1544014350.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:52:30.503Z,1544014350.503 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-05T12:52:30.503Z,1544014350.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:52:30.503Z,1544014350.503 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-05T12:52:30.890Z,1544014350.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:52:30.890Z,1544014350.890 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:52:30.891Z,1544014350.891 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:52:30.891Z,1544014350.891 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:52:30.891Z,1544014350.891 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:52:30.892Z,1544014350.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:54:30.910Z,1544014470.910 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:54:30.910Z,1544014470.910 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-05T12:54:30.910Z,1544014470.910 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:54:30.913Z,1544014470.913 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:54:30.913Z,1544014470.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-05T12:54:30.913Z,1544014470.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:54:30.926Z,1544014470.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:54:30.927Z,1544014470.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:54:31.335Z,1544014471.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:54:31.335Z,1544014471.335 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-05T12:54:31.335Z,1544014471.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:54:31.335Z,1544014471.335 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-05T12:54:31.710Z,1544014471.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:54:31.715Z,1544014471.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:54:31.715Z,1544014471.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:54:31.715Z,1544014471.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:54:31.716Z,1544014471.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:54:31.716Z,1544014471.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:55:50.970Z,1544014550.970 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T12:50:49.6Z 2018-12-05T12:55:50.970Z,1544014550.970 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T12:55:50.970Z,1544014550.970 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T12:55:55.961Z,1544014555.961 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0690.lzma 2018-12-05T12:55:56.753Z,1544014556.753 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0690.lzma.bak 2018-12-05T12:55:56.753Z,1544014556.753 [DataOverHttps](INFO): SBD MOMSN=8968555 2018-12-05T12:56:06.172Z,1544014566.172 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T12:56:06.246Z,1544014566.246 [DataOverHttps](INFO): Sending 291 bytes from file Logs/20181203T211451/Express0691.lzma 2018-12-05T12:56:07.045Z,1544014567.045 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0691.lzma.bak 2018-12-05T12:56:07.046Z,1544014567.046 [DataOverHttps](INFO): SBD MOMSN=8968559 2018-12-05T12:56:08.447Z,1544014568.447 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T12:56:08.448Z,1544014568.448 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T12:56:08.448Z,1544014568.448 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T12:56:32.072Z,1544014592.072 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:56:32.072Z,1544014592.072 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-05T12:56:32.072Z,1544014592.072 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:56:32.074Z,1544014592.074 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:56:32.074Z,1544014592.074 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-05T12:56:32.074Z,1544014592.074 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:56:32.100Z,1544014592.100 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:56:32.101Z,1544014592.101 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:56:32.493Z,1544014592.493 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:56:32.493Z,1544014592.493 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-05T12:56:32.494Z,1544014592.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:56:32.494Z,1544014592.494 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-05T12:56:32.886Z,1544014592.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:56:32.887Z,1544014592.887 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:56:32.887Z,1544014592.887 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:56:32.888Z,1544014592.888 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:56:32.888Z,1544014592.888 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:56:32.888Z,1544014592.888 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:56:36.455Z,1544014596.455 [NAL9602](INFO): Powering down 2018-12-05T12:58:32.983Z,1544014712.983 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:58:32.983Z,1544014712.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-05T12:58:32.983Z,1544014712.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T12:58:32.985Z,1544014712.985 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T12:58:32.985Z,1544014712.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-05T12:58:32.985Z,1544014712.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T12:58:32.999Z,1544014712.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T12:58:32.999Z,1544014712.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T12:58:33.120Z,1544014713.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T12:58:33.120Z,1544014713.120 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-05T12:58:33.121Z,1544014713.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T12:58:33.121Z,1544014713.121 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-05T12:58:33.434Z,1544014713.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T12:58:33.434Z,1544014713.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:58:33.435Z,1544014713.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T12:58:33.435Z,1544014713.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T12:58:33.435Z,1544014713.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T12:58:33.436Z,1544014713.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:00:33.721Z,1544014833.721 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:00:33.721Z,1544014833.721 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-05T13:00:33.721Z,1544014833.721 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:00:33.723Z,1544014833.723 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:00:33.724Z,1544014833.724 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-05T13:00:33.724Z,1544014833.724 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:00:33.737Z,1544014833.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:00:33.737Z,1544014833.737 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:00:34.145Z,1544014834.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:00:34.146Z,1544014834.146 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-05T13:00:34.146Z,1544014834.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:00:34.146Z,1544014834.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-05T13:00:34.522Z,1544014834.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:00:34.536Z,1544014834.536 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:00:34.537Z,1544014834.537 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:00:34.537Z,1544014834.537 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:00:34.537Z,1544014834.537 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:00:34.538Z,1544014834.538 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:01:08.645Z,1544014868.645 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T13:01:08.645Z,1544014868.645 [Default:CheckIn:C.Wait] Stopped 2018-12-05T13:01:08.645Z,1544014868.645 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T13:01:08.645Z,1544014868.645 [Default:CheckIn:D] Running Loop=1 2018-12-05T13:01:09.047Z,1544014869.047 [Default:CheckIn:D] Stopped 2018-12-05T13:01:09.047Z,1544014869.047 [Default:CheckIn:E] Running Loop=1 2018-12-05T13:01:09.454Z,1544014869.454 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2386.283854 min 2018-12-05T13:01:09.454Z,1544014869.454 [Default:CheckIn:E] Stopped 2018-12-05T13:01:09.454Z,1544014869.454 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T13:01:09.455Z,1544014869.455 [Default:CheckIn] Stopped 2018-12-05T13:01:09.455Z,1544014869.455 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T13:01:09.455Z,1544014869.455 [Default:CheckIn](INFO): Running loop #232 2018-12-05T13:01:09.455Z,1544014869.455 [Default:CheckIn] Running Loop=232 2018-12-05T13:01:09.455Z,1544014869.455 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T13:01:09.455Z,1544014869.455 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T13:01:10.219Z,1544014870.219 [NAL9602](INFO): Powering up 2018-12-05T13:01:21.419Z,1544014881.419 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:01:22.217Z,1544014882.217 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T13:01:22.217Z,1544014882.217 [NAL9602] Data Fault, FailCount= 3 2018-12-05T13:01:22.218Z,1544014882.218 [NAL9602](ERROR): Data Fault 2018-12-05T13:01:22.282Z,1544014882.282 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T13:01:22.619Z,1544014882.619 [NAL9602](INFO): Powering down 2018-12-05T13:01:23.462Z,1544014883.462 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T13:01:23.462Z,1544014883.462 [NAL9602] No Fault, FailCount= 3 2018-12-05T13:01:52.695Z,1544014912.695 [NAL9602](INFO): Powering up NAL9602 2018-12-05T13:02:04.703Z,1544014924.703 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:02:34.738Z,1544014954.738 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:02:34.738Z,1544014954.738 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-05T13:02:34.738Z,1544014954.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:02:34.740Z,1544014954.740 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:02:34.740Z,1544014954.740 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-05T13:02:34.741Z,1544014954.741 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:02:34.837Z,1544014954.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:02:34.837Z,1544014954.837 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:02:35.158Z,1544014955.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:02:35.158Z,1544014955.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-05T13:02:35.159Z,1544014955.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:02:35.159Z,1544014955.159 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-05T13:02:35.526Z,1544014955.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:02:35.534Z,1544014955.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:02:35.535Z,1544014955.535 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:02:35.535Z,1544014955.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:02:35.536Z,1544014955.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:02:35.536Z,1544014955.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:04:35.556Z,1544015075.556 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:04:35.556Z,1544015075.556 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-05T13:04:35.556Z,1544015075.556 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:04:35.558Z,1544015075.558 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:04:35.558Z,1544015075.558 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-05T13:04:35.558Z,1544015075.558 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:04:35.572Z,1544015075.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:04:35.572Z,1544015075.572 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:04:35.998Z,1544015075.998 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:04:35.999Z,1544015075.999 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-05T13:04:35.999Z,1544015075.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:04:35.999Z,1544015075.999 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-05T13:04:36.366Z,1544015076.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:04:36.367Z,1544015076.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:04:36.367Z,1544015076.367 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:04:36.368Z,1544015076.368 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:04:36.368Z,1544015076.368 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:04:36.369Z,1544015076.369 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:06:10.733Z,1544015170.733 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T13:01:09.5Z 2018-12-05T13:06:10.733Z,1544015170.733 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T13:06:10.733Z,1544015170.733 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T13:06:15.693Z,1544015175.693 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0693.lzma 2018-12-05T13:06:16.493Z,1544015176.493 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0693.lzma.bak 2018-12-05T13:06:16.493Z,1544015176.493 [DataOverHttps](INFO): SBD MOMSN=8968580 2018-12-05T13:06:26.325Z,1544015186.325 [DataOverHttps](INFO): Sending 303 bytes from file Logs/20181203T211451/Express0694.lzma 2018-12-05T13:06:27.106Z,1544015187.106 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0694.lzma.bak 2018-12-05T13:06:27.106Z,1544015187.106 [DataOverHttps](INFO): SBD MOMSN=8968582 2018-12-05T13:06:28.485Z,1544015188.485 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T13:06:28.485Z,1544015188.485 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T13:06:28.485Z,1544015188.485 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T13:06:36.546Z,1544015196.546 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:06:36.546Z,1544015196.546 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-05T13:06:36.547Z,1544015196.547 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:06:36.549Z,1544015196.549 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:06:36.549Z,1544015196.549 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-05T13:06:36.549Z,1544015196.549 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:06:36.603Z,1544015196.603 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:06:36.604Z,1544015196.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:06:36.938Z,1544015196.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:06:36.938Z,1544015196.938 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-05T13:06:36.967Z,1544015196.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:06:36.967Z,1544015196.967 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-05T13:06:37.295Z,1544015197.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:06:37.295Z,1544015197.295 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:06:37.296Z,1544015197.296 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:06:37.296Z,1544015197.296 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:06:37.296Z,1544015197.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:06:37.297Z,1544015197.297 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:07:08.212Z,1544015228.212 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T13:07:21.045Z,1544015241.045 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T13:07:21.045Z,1544015241.045 [DropWeight] No Fault, FailCount= 1 2018-12-05T13:07:38.608Z,1544015258.608 [NAL9602](INFO): Powering down 2018-12-05T13:08:37.466Z,1544015317.466 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:08:37.466Z,1544015317.466 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-05T13:08:37.467Z,1544015317.467 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:08:37.469Z,1544015317.469 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:08:37.469Z,1544015317.469 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-05T13:08:37.469Z,1544015317.469 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:08:37.482Z,1544015317.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:08:37.482Z,1544015317.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:08:37.878Z,1544015317.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:08:37.878Z,1544015317.878 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-05T13:08:37.878Z,1544015317.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:08:37.878Z,1544015317.878 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-05T13:08:38.264Z,1544015318.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:08:38.264Z,1544015318.264 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:08:38.264Z,1544015318.264 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:08:38.265Z,1544015318.265 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:08:38.265Z,1544015318.265 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:08:38.266Z,1544015318.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:10:38.687Z,1544015438.687 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:10:38.687Z,1544015438.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-05T13:10:38.687Z,1544015438.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:10:38.689Z,1544015438.689 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:10:38.689Z,1544015438.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-05T13:10:38.689Z,1544015438.689 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:10:38.703Z,1544015438.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:10:38.703Z,1544015438.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:10:38.813Z,1544015438.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:10:38.813Z,1544015438.813 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-05T13:10:38.814Z,1544015438.814 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:10:38.814Z,1544015438.814 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-05T13:10:39.201Z,1544015439.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:10:39.201Z,1544015439.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:10:39.202Z,1544015439.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:10:39.202Z,1544015439.202 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:10:39.203Z,1544015439.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:10:39.203Z,1544015439.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:11:28.786Z,1544015488.786 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T13:11:28.786Z,1544015488.786 [Default:CheckIn:C.Wait] Stopped 2018-12-05T13:11:28.790Z,1544015488.790 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T13:11:28.790Z,1544015488.790 [Default:CheckIn:D] Running Loop=1 2018-12-05T13:11:29.172Z,1544015489.172 [Default:CheckIn:D] Stopped 2018-12-05T13:11:29.172Z,1544015489.172 [Default:CheckIn:E] Running Loop=1 2018-12-05T13:11:29.562Z,1544015489.562 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2396.619271 min 2018-12-05T13:11:29.586Z,1544015489.586 [Default:CheckIn:E] Stopped 2018-12-05T13:11:29.587Z,1544015489.587 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T13:11:29.587Z,1544015489.587 [Default:CheckIn] Stopped 2018-12-05T13:11:29.587Z,1544015489.587 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T13:11:29.587Z,1544015489.587 [Default:CheckIn](INFO): Running loop #233 2018-12-05T13:11:29.587Z,1544015489.587 [Default:CheckIn] Running Loop=233 2018-12-05T13:11:29.587Z,1544015489.587 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T13:11:29.587Z,1544015489.587 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T13:11:30.331Z,1544015490.331 [NAL9602](INFO): Powering up 2018-12-05T13:11:41.532Z,1544015501.532 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:12:39.529Z,1544015559.529 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:12:39.530Z,1544015559.530 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-05T13:12:39.530Z,1544015559.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:12:39.532Z,1544015559.532 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:12:39.532Z,1544015559.532 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-05T13:12:39.532Z,1544015559.532 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:12:39.547Z,1544015559.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:12:39.547Z,1544015559.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:12:39.939Z,1544015559.939 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:12:39.940Z,1544015559.940 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-05T13:12:39.940Z,1544015559.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:12:39.940Z,1544015559.940 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-05T13:12:40.326Z,1544015560.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:12:40.341Z,1544015560.341 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:12:40.341Z,1544015560.341 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:12:40.342Z,1544015560.342 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:12:40.344Z,1544015560.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:12:40.344Z,1544015560.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:14:40.438Z,1544015680.438 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:14:40.438Z,1544015680.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-05T13:14:40.438Z,1544015680.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:14:40.440Z,1544015680.440 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:14:40.440Z,1544015680.440 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-05T13:14:40.441Z,1544015680.441 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:14:40.491Z,1544015680.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:14:40.492Z,1544015680.492 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:14:40.847Z,1544015680.847 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:14:40.847Z,1544015680.847 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-05T13:14:40.847Z,1544015680.847 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:14:40.848Z,1544015680.848 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-05T13:14:41.238Z,1544015681.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:14:41.238Z,1544015681.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:14:41.239Z,1544015681.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:14:41.239Z,1544015681.239 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:14:41.239Z,1544015681.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:14:41.240Z,1544015681.240 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:16:30.782Z,1544015790.782 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T13:11:29.6Z 2018-12-05T13:16:30.783Z,1544015790.783 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T13:16:30.783Z,1544015790.783 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T13:16:35.843Z,1544015795.843 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0696.lzma 2018-12-05T13:16:36.641Z,1544015796.641 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0696.lzma.bak 2018-12-05T13:16:36.641Z,1544015796.641 [DataOverHttps](INFO): SBD MOMSN=8968604 2018-12-05T13:16:41.283Z,1544015801.283 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:16:41.284Z,1544015801.284 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-05T13:16:41.284Z,1544015801.284 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:16:41.286Z,1544015801.286 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:16:41.286Z,1544015801.286 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-05T13:16:41.286Z,1544015801.286 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:16:41.300Z,1544015801.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:16:41.300Z,1544015801.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:16:41.674Z,1544015801.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:16:41.674Z,1544015801.674 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-05T13:16:41.675Z,1544015801.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:16:41.675Z,1544015801.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-05T13:16:42.037Z,1544015802.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:16:42.038Z,1544015802.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:16:42.038Z,1544015802.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:16:42.039Z,1544015802.039 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:16:42.039Z,1544015802.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:16:42.039Z,1544015802.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:16:45.906Z,1544015805.906 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T13:16:45.995Z,1544015805.995 [DataOverHttps](INFO): Sending 290 bytes from file Logs/20181203T211451/Express0697.lzma 2018-12-05T13:16:46.767Z,1544015806.767 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0697.lzma.bak 2018-12-05T13:16:46.767Z,1544015806.767 [DataOverHttps](INFO): SBD MOMSN=8968606 2018-12-05T13:16:48.279Z,1544015808.279 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T13:16:48.279Z,1544015808.279 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T13:16:48.279Z,1544015808.279 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T13:17:16.351Z,1544015836.351 [NAL9602](INFO): Powering down 2018-12-05T13:18:42.392Z,1544015922.392 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:18:42.392Z,1544015922.392 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-05T13:18:42.392Z,1544015922.392 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:18:42.394Z,1544015922.394 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:18:42.395Z,1544015922.395 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-05T13:18:42.395Z,1544015922.395 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:18:42.408Z,1544015922.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:18:42.408Z,1544015922.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:18:42.817Z,1544015922.817 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:18:42.817Z,1544015922.817 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-05T13:18:42.818Z,1544015922.818 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:18:42.818Z,1544015922.818 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-05T13:18:43.197Z,1544015923.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:18:43.198Z,1544015923.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:18:43.198Z,1544015923.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:18:43.199Z,1544015923.199 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:18:43.199Z,1544015923.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:18:43.199Z,1544015923.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:20:43.290Z,1544016043.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:20:43.290Z,1544016043.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-05T13:20:43.291Z,1544016043.291 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:20:43.293Z,1544016043.293 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:20:43.293Z,1544016043.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-05T13:20:43.293Z,1544016043.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:20:43.306Z,1544016043.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:20:43.306Z,1544016043.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:20:43.702Z,1544016043.702 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:20:43.702Z,1544016043.702 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-05T13:20:43.703Z,1544016043.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:20:43.703Z,1544016043.703 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-05T13:20:44.075Z,1544016044.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:20:44.076Z,1544016044.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:20:44.076Z,1544016044.076 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:20:44.076Z,1544016044.076 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:20:44.077Z,1544016044.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:20:44.077Z,1544016044.077 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:21:48.469Z,1544016108.469 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T13:21:48.469Z,1544016108.469 [Default:CheckIn:C.Wait] Stopped 2018-12-05T13:21:48.469Z,1544016108.469 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T13:21:48.469Z,1544016108.469 [Default:CheckIn:D] Running Loop=1 2018-12-05T13:21:48.866Z,1544016108.866 [Default:CheckIn:D] Stopped 2018-12-05T13:21:48.866Z,1544016108.866 [Default:CheckIn:E] Running Loop=1 2018-12-05T13:21:49.265Z,1544016109.265 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2406.947396 min 2018-12-05T13:21:49.265Z,1544016109.265 [Default:CheckIn:E] Stopped 2018-12-05T13:21:49.265Z,1544016109.265 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T13:21:49.265Z,1544016109.265 [Default:CheckIn] Stopped 2018-12-05T13:21:49.265Z,1544016109.265 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T13:21:49.266Z,1544016109.266 [Default:CheckIn](INFO): Running loop #234 2018-12-05T13:21:49.266Z,1544016109.266 [Default:CheckIn] Running Loop=234 2018-12-05T13:21:49.266Z,1544016109.266 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T13:21:49.266Z,1544016109.266 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T13:21:50.035Z,1544016110.035 [NAL9602](INFO): Powering up 2018-12-05T13:22:01.236Z,1544016121.236 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:22:02.036Z,1544016122.036 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T13:22:02.036Z,1544016122.036 [NAL9602] Data Fault, FailCount= 4 2018-12-05T13:22:02.036Z,1544016122.036 [NAL9602](ERROR): Data Fault 2018-12-05T13:22:02.102Z,1544016122.102 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T13:22:02.436Z,1544016122.436 [NAL9602](INFO): Powering down 2018-12-05T13:22:03.291Z,1544016123.291 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T13:22:03.292Z,1544016123.292 [NAL9602] No Fault, FailCount= 4 2018-12-05T13:22:32.801Z,1544016152.801 [NAL9602](INFO): Powering up NAL9602 2018-12-05T13:22:44.083Z,1544016164.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:22:44.083Z,1544016164.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-05T13:22:44.083Z,1544016164.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:22:44.085Z,1544016164.085 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:22:44.085Z,1544016164.085 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-05T13:22:44.085Z,1544016164.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:22:44.099Z,1544016164.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:22:44.099Z,1544016164.099 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:22:44.231Z,1544016164.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:22:44.231Z,1544016164.231 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-05T13:22:44.231Z,1544016164.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:22:44.232Z,1544016164.232 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-05T13:22:44.512Z,1544016164.512 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:22:44.545Z,1544016164.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:22:44.545Z,1544016164.545 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:22:44.546Z,1544016164.546 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:22:44.546Z,1544016164.546 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:22:44.547Z,1544016164.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:22:44.547Z,1544016164.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:24:44.570Z,1544016284.570 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:24:44.570Z,1544016284.570 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-05T13:24:44.570Z,1544016284.570 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:24:44.572Z,1544016284.572 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:24:44.573Z,1544016284.573 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-05T13:24:44.573Z,1544016284.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:24:44.586Z,1544016284.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:24:44.586Z,1544016284.586 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:24:44.994Z,1544016284.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:24:44.994Z,1544016284.994 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-05T13:24:44.994Z,1544016284.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:24:44.995Z,1544016284.995 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-05T13:24:45.382Z,1544016285.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:24:45.383Z,1544016285.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:24:45.383Z,1544016285.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:24:45.383Z,1544016285.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:24:45.384Z,1544016285.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:24:45.384Z,1544016285.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:26:45.471Z,1544016405.471 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:26:45.471Z,1544016405.471 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-05T13:26:45.471Z,1544016405.471 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:26:45.473Z,1544016405.473 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:26:45.473Z,1544016405.473 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-05T13:26:45.473Z,1544016405.473 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:26:45.488Z,1544016405.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:26:45.488Z,1544016405.488 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:26:45.887Z,1544016405.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:26:45.887Z,1544016405.887 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-05T13:26:45.887Z,1544016405.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:26:45.888Z,1544016405.888 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-05T13:26:46.265Z,1544016406.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:26:46.265Z,1544016406.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:26:46.265Z,1544016406.265 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:26:46.266Z,1544016406.266 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:26:46.266Z,1544016406.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:26:46.267Z,1544016406.267 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:26:50.674Z,1544016410.674 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T13:21:49.3Z 2018-12-05T13:26:50.674Z,1544016410.674 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T13:26:50.675Z,1544016410.675 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T13:26:55.595Z,1544016415.595 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0699.lzma 2018-12-05T13:26:56.397Z,1544016416.397 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0699.lzma.bak 2018-12-05T13:26:56.398Z,1544016416.398 [DataOverHttps](INFO): SBD MOMSN=8968628 2018-12-05T13:27:06.051Z,1544016426.051 [DataOverHttps](INFO): Sending 317 bytes from file Logs/20181203T211451/Express0700.lzma 2018-12-05T13:27:06.817Z,1544016426.817 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0700.lzma.bak 2018-12-05T13:27:06.817Z,1544016426.817 [DataOverHttps](INFO): SBD MOMSN=8968630 2018-12-05T13:27:08.185Z,1544016428.185 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T13:27:08.185Z,1544016428.185 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T13:27:08.185Z,1544016428.185 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T13:27:47.005Z,1544016467.005 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T13:28:17.756Z,1544016497.756 [NAL9602](INFO): Powering down 2018-12-05T13:28:46.297Z,1544016526.297 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:28:46.297Z,1544016526.297 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-05T13:28:46.297Z,1544016526.297 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:28:46.299Z,1544016526.299 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:28:46.299Z,1544016526.299 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-05T13:28:46.299Z,1544016526.299 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:28:46.313Z,1544016526.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:28:46.313Z,1544016526.313 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:28:46.723Z,1544016526.723 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:28:46.723Z,1544016526.723 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-05T13:28:46.724Z,1544016526.724 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:28:46.724Z,1544016526.724 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-05T13:28:47.106Z,1544016527.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:28:47.107Z,1544016527.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:28:47.107Z,1544016527.107 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:28:47.108Z,1544016527.108 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:28:47.108Z,1544016527.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:28:47.108Z,1544016527.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:29:27.138Z,1544016567.138 [CBIT](IMPORTANT): Beginning ground fault scan 2018-12-05T13:29:40.844Z,1544016580.844 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.144161 CHAN A1 (24V): 0.000614 CHAN A2 (12V): -0.005734 CHAN A3 (5V): -0.003544 CHAN B0 (3.3V): -0.001390 CHAN B1 (3.15aV): -0.001764 CHAN B2 (3.15bV): -0.001561 CHAN B3 (GND): -0.000480 OPEN: -0.001144 Full Scale Calc: 4.765 mA, -1.589 mA 2018-12-05T13:30:47.158Z,1544016647.158 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:30:47.158Z,1544016647.158 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-05T13:30:47.158Z,1544016647.158 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:30:47.160Z,1544016647.160 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:30:47.160Z,1544016647.160 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-05T13:30:47.161Z,1544016647.161 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:30:47.210Z,1544016647.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:30:47.210Z,1544016647.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:30:47.563Z,1544016647.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:30:47.563Z,1544016647.563 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-05T13:30:47.564Z,1544016647.564 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:30:47.564Z,1544016647.564 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-05T13:30:47.953Z,1544016647.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:30:47.954Z,1544016647.954 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:30:47.954Z,1544016647.954 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:30:47.955Z,1544016647.955 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:30:47.955Z,1544016647.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:30:47.955Z,1544016647.955 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:32:08.662Z,1544016728.662 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T13:32:08.662Z,1544016728.662 [Default:CheckIn:C.Wait] Stopped 2018-12-05T13:32:08.662Z,1544016728.662 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T13:32:08.662Z,1544016728.662 [Default:CheckIn:D] Running Loop=1 2018-12-05T13:32:09.057Z,1544016729.057 [Default:CheckIn:D] Stopped 2018-12-05T13:32:09.057Z,1544016729.057 [Default:CheckIn:E] Running Loop=1 2018-12-05T13:32:09.462Z,1544016729.462 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2417.283854 min 2018-12-05T13:32:09.462Z,1544016729.462 [Default:CheckIn:E] Stopped 2018-12-05T13:32:09.462Z,1544016729.462 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T13:32:09.463Z,1544016729.463 [Default:CheckIn] Stopped 2018-12-05T13:32:09.463Z,1544016729.463 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T13:32:09.463Z,1544016729.463 [Default:CheckIn](INFO): Running loop #235 2018-12-05T13:32:09.463Z,1544016729.463 [Default:CheckIn] Running Loop=235 2018-12-05T13:32:09.463Z,1544016729.463 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T13:32:09.463Z,1544016729.463 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T13:32:10.227Z,1544016730.227 [NAL9602](INFO): Powering up 2018-12-05T13:32:21.028Z,1544016741.028 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:32:47.973Z,1544016767.973 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:32:47.973Z,1544016767.973 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-05T13:32:47.973Z,1544016767.973 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:32:47.975Z,1544016767.975 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:32:47.975Z,1544016767.975 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-05T13:32:47.975Z,1544016767.975 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:32:47.990Z,1544016767.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:32:47.990Z,1544016767.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:32:48.394Z,1544016768.394 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:32:48.394Z,1544016768.394 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-05T13:32:48.395Z,1544016768.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:32:48.395Z,1544016768.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-05T13:32:48.772Z,1544016768.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:32:48.773Z,1544016768.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:32:48.773Z,1544016768.773 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:32:48.774Z,1544016768.774 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:32:48.774Z,1544016768.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:32:48.774Z,1544016768.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:32:52.748Z,1544016772.748 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T13:32:52.822Z,1544016772.822 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T13:32:52.822Z,1544016772.822 [NAL9602] Data Fault, FailCount= 5 2018-12-05T13:32:52.822Z,1544016772.822 [NAL9602](ERROR): Data Fault 2018-12-05T13:32:52.878Z,1544016772.878 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T13:32:52.878Z,1544016772.878 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T13:32:53.148Z,1544016773.148 [NAL9602](INFO): Powering down 2018-12-05T13:32:53.200Z,1544016773.200 [CBIT](INFO): Critical error at 20181205T133252 2018-12-05T13:34:49.552Z,1544016889.552 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:34:49.552Z,1544016889.552 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-05T13:34:49.552Z,1544016889.552 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:34:49.555Z,1544016889.555 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:34:49.555Z,1544016889.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-05T13:34:49.555Z,1544016889.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:34:49.568Z,1544016889.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:34:49.569Z,1544016889.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:34:49.710Z,1544016889.710 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:34:49.710Z,1544016889.710 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-05T13:34:49.711Z,1544016889.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:34:49.711Z,1544016889.711 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-05T13:34:50.101Z,1544016890.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:34:50.102Z,1544016890.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:34:50.102Z,1544016890.102 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:34:50.103Z,1544016890.103 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:34:50.103Z,1544016890.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:34:50.103Z,1544016890.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:34:52.866Z,1544016892.866 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T13:34:52.866Z,1544016892.866 [NAL9602] No Fault, FailCount= 5 2018-12-05T13:34:53.208Z,1544016893.208 [NAL9602](INFO): Powering up NAL9602 2018-12-05T13:35:04.008Z,1544016904.008 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:35:04.808Z,1544016904.808 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T13:35:04.808Z,1544016904.808 [NAL9602] Data Fault, FailCount= 1 2018-12-05T13:35:04.808Z,1544016904.808 [NAL9602](ERROR): Data Fault 2018-12-05T13:35:04.877Z,1544016904.877 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T13:35:05.208Z,1544016905.208 [NAL9602](INFO): Powering down 2018-12-05T13:35:06.069Z,1544016906.069 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T13:35:06.069Z,1544016906.069 [NAL9602] No Fault, FailCount= 1 2018-12-05T13:35:35.220Z,1544016935.220 [NAL9602](INFO): Powering up NAL9602 2018-12-05T13:35:46.420Z,1544016946.420 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:36:50.182Z,1544017010.182 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:36:50.182Z,1544017010.182 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-05T13:36:50.182Z,1544017010.182 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:36:50.187Z,1544017010.187 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:36:50.187Z,1544017010.187 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-05T13:36:50.187Z,1544017010.187 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:36:50.208Z,1544017010.208 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:36:50.208Z,1544017010.208 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:36:50.606Z,1544017010.606 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:36:50.606Z,1544017010.606 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-05T13:36:50.607Z,1544017010.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:36:50.607Z,1544017010.607 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-05T13:36:50.986Z,1544017010.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:36:50.991Z,1544017010.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:36:50.991Z,1544017010.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:36:50.991Z,1544017010.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:36:50.992Z,1544017010.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:36:50.992Z,1544017010.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:37:10.514Z,1544017030.514 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T13:32:09.5Z 2018-12-05T13:37:10.515Z,1544017030.515 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T13:37:10.515Z,1544017030.515 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T13:37:15.509Z,1544017035.509 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0702.lzma 2018-12-05T13:37:16.290Z,1544017036.290 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0702.lzma.bak 2018-12-05T13:37:16.291Z,1544017036.291 [DataOverHttps](INFO): SBD MOMSN=8968656 2018-12-05T13:37:22.331Z,1544017042.331 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T13:37:22.331Z,1544017042.331 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T13:37:22.331Z,1544017042.331 [DropWeight](ERROR): Hardware Fault 2018-12-05T13:37:22.394Z,1544017042.394 [CBIT](INFO): Critical error at 20181205T133722 2018-12-05T13:37:22.397Z,1544017042.397 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T13:37:22.397Z,1544017042.397 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T13:37:22.781Z,1544017042.781 [CBIT](INFO): Critical error at 20181205T133722 2018-12-05T13:37:25.830Z,1544017045.830 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T13:37:26.034Z,1544017046.034 [DataOverHttps](INFO): Sending 521 bytes from file Logs/20181203T211451/Express0703.lzma 2018-12-05T13:37:26.834Z,1544017046.834 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0703.lzma.bak 2018-12-05T13:37:26.837Z,1544017046.837 [DataOverHttps](INFO): SBD MOMSN=8968659 2018-12-05T13:37:28.188Z,1544017048.188 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T13:37:28.188Z,1544017048.188 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T13:37:28.188Z,1544017048.188 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T13:37:56.191Z,1544017076.191 [NAL9602](INFO): Powering down 2018-12-05T13:38:51.350Z,1544017131.350 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:38:51.350Z,1544017131.350 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-05T13:38:51.350Z,1544017131.350 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:38:51.352Z,1544017131.352 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:38:51.352Z,1544017131.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-05T13:38:51.353Z,1544017131.353 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:38:51.397Z,1544017131.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:38:51.398Z,1544017131.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:38:51.762Z,1544017131.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:38:51.762Z,1544017131.762 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-05T13:38:51.763Z,1544017131.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:38:51.763Z,1544017131.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-05T13:38:52.150Z,1544017132.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:38:52.150Z,1544017132.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:38:52.151Z,1544017132.151 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:38:52.151Z,1544017132.151 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:38:52.151Z,1544017132.151 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:38:52.152Z,1544017132.152 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:40:52.478Z,1544017252.478 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:40:52.478Z,1544017252.478 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-05T13:40:52.478Z,1544017252.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:40:52.480Z,1544017252.480 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:40:52.481Z,1544017252.481 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-05T13:40:52.481Z,1544017252.481 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:40:52.494Z,1544017252.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:40:52.495Z,1544017252.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:40:52.890Z,1544017252.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:40:52.890Z,1544017252.890 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-05T13:40:52.891Z,1544017252.891 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:40:52.891Z,1544017252.891 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-05T13:40:53.328Z,1544017253.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:40:53.329Z,1544017253.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:40:53.329Z,1544017253.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:40:53.329Z,1544017253.329 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:40:53.330Z,1544017253.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:40:53.330Z,1544017253.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:40:56.076Z,1544017256.076 [BPC1](INFO): Calculating totals. Valid battery stick count: 50. Valid reserve battery stick count: 6. 2018-12-05T13:42:28.651Z,1544017348.651 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T13:42:28.651Z,1544017348.651 [Default:CheckIn:C.Wait] Stopped 2018-12-05T13:42:28.652Z,1544017348.652 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T13:42:28.652Z,1544017348.652 [Default:CheckIn:D] Running Loop=1 2018-12-05T13:42:29.058Z,1544017349.058 [Default:CheckIn:D] Stopped 2018-12-05T13:42:29.058Z,1544017349.058 [Default:CheckIn:E] Running Loop=1 2018-12-05T13:42:29.452Z,1544017349.452 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2427.617188 min 2018-12-05T13:42:29.453Z,1544017349.453 [Default:CheckIn:E] Stopped 2018-12-05T13:42:29.453Z,1544017349.453 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T13:42:29.453Z,1544017349.453 [Default:CheckIn] Stopped 2018-12-05T13:42:29.453Z,1544017349.453 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T13:42:29.453Z,1544017349.453 [Default:CheckIn](INFO): Running loop #236 2018-12-05T13:42:29.453Z,1544017349.453 [Default:CheckIn] Running Loop=236 2018-12-05T13:42:29.453Z,1544017349.453 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T13:42:29.454Z,1544017349.454 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T13:42:30.217Z,1544017350.217 [NAL9602](INFO): Powering up 2018-12-05T13:42:41.019Z,1544017361.019 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:42:53.418Z,1544017373.418 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:42:53.418Z,1544017373.418 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-05T13:42:53.419Z,1544017373.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:42:53.421Z,1544017373.421 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:42:53.421Z,1544017373.421 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-05T13:42:53.421Z,1544017373.421 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:42:53.435Z,1544017373.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:42:53.435Z,1544017373.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:42:53.830Z,1544017373.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:42:53.830Z,1544017373.830 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-05T13:42:53.831Z,1544017373.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:42:53.831Z,1544017373.831 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-05T13:42:54.212Z,1544017374.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:42:54.212Z,1544017374.212 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:42:54.213Z,1544017374.213 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:42:54.213Z,1544017374.213 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:42:54.213Z,1544017374.213 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:42:54.214Z,1544017374.214 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:43:12.987Z,1544017392.987 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T13:43:13.070Z,1544017393.070 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T13:43:13.070Z,1544017393.070 [NAL9602] Data Fault, FailCount= 2 2018-12-05T13:43:13.070Z,1544017393.070 [NAL9602](ERROR): Data Fault 2018-12-05T13:43:13.141Z,1544017393.141 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T13:43:13.387Z,1544017393.387 [NAL9602](INFO): Powering down 2018-12-05T13:43:14.231Z,1544017394.231 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T13:43:14.231Z,1544017394.231 [NAL9602] No Fault, FailCount= 2 2018-12-05T13:43:43.751Z,1544017423.751 [NAL9602](INFO): Powering up NAL9602 2018-12-05T13:43:54.948Z,1544017434.948 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:44:54.394Z,1544017494.394 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:44:54.395Z,1544017494.395 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-05T13:44:54.395Z,1544017494.395 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:44:54.397Z,1544017494.397 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:44:54.397Z,1544017494.397 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-05T13:44:54.397Z,1544017494.397 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:44:54.431Z,1544017494.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:44:54.431Z,1544017494.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:44:54.840Z,1544017494.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:44:54.840Z,1544017494.840 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-05T13:44:54.841Z,1544017494.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:44:54.841Z,1544017494.841 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-05T13:44:55.201Z,1544017495.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:44:55.201Z,1544017495.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:44:55.201Z,1544017495.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:44:55.202Z,1544017495.202 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:44:55.202Z,1544017495.202 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:44:55.203Z,1544017495.203 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:46:55.202Z,1544017615.202 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:46:55.203Z,1544017615.203 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-05T13:46:55.203Z,1544017615.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:46:55.205Z,1544017615.205 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:46:55.205Z,1544017615.205 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-05T13:46:55.205Z,1544017615.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:46:55.219Z,1544017615.219 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:46:55.219Z,1544017615.219 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:46:55.570Z,1544017615.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:46:55.570Z,1544017615.570 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-05T13:46:55.571Z,1544017615.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:46:55.571Z,1544017615.571 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-05T13:46:55.995Z,1544017615.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:46:55.996Z,1544017615.996 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:46:55.996Z,1544017615.996 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:46:55.996Z,1544017615.996 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:46:55.997Z,1544017615.997 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:46:55.997Z,1544017615.997 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:47:30.424Z,1544017650.424 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T13:42:29.5Z 2018-12-05T13:47:30.425Z,1544017650.425 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T13:47:30.425Z,1544017650.425 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T13:47:35.505Z,1544017655.505 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0705.lzma 2018-12-05T13:47:36.297Z,1544017656.297 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0705.lzma.bak 2018-12-05T13:47:36.297Z,1544017656.297 [DataOverHttps](INFO): SBD MOMSN=8968686 2018-12-05T13:47:45.557Z,1544017665.557 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T13:47:45.638Z,1544017665.638 [DataOverHttps](INFO): Sending 326 bytes from file Logs/20181203T211451/Express0706.lzma 2018-12-05T13:47:46.422Z,1544017666.422 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0706.lzma.bak 2018-12-05T13:47:46.422Z,1544017666.422 [DataOverHttps](INFO): SBD MOMSN=8968690 2018-12-05T13:47:47.860Z,1544017667.860 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T13:47:47.860Z,1544017667.860 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T13:47:47.860Z,1544017667.860 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T13:48:15.987Z,1544017695.987 [NAL9602](INFO): Powering down 2018-12-05T13:48:56.147Z,1544017736.147 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:48:56.147Z,1544017736.147 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-05T13:48:56.147Z,1544017736.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:48:56.149Z,1544017736.149 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:48:56.150Z,1544017736.150 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-05T13:48:56.150Z,1544017736.150 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:48:56.163Z,1544017736.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:48:56.163Z,1544017736.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:48:56.562Z,1544017736.562 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:48:56.562Z,1544017736.562 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-05T13:48:56.563Z,1544017736.563 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:48:56.563Z,1544017736.563 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-05T13:48:56.946Z,1544017736.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:48:56.947Z,1544017736.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:48:56.947Z,1544017736.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:48:56.948Z,1544017736.948 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:48:56.948Z,1544017736.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:48:56.948Z,1544017736.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:50:57.151Z,1544017857.151 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:50:57.151Z,1544017857.151 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-05T13:50:57.151Z,1544017857.151 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:50:57.153Z,1544017857.153 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:50:57.153Z,1544017857.153 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-05T13:50:57.153Z,1544017857.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:50:57.167Z,1544017857.167 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:50:57.167Z,1544017857.167 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:50:57.570Z,1544017857.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:50:57.571Z,1544017857.571 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-05T13:50:57.571Z,1544017857.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:50:57.571Z,1544017857.571 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-05T13:50:57.954Z,1544017857.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:50:57.955Z,1544017857.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:50:57.955Z,1544017857.955 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:50:57.955Z,1544017857.955 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:50:57.956Z,1544017857.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:50:57.956Z,1544017857.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:52:22.374Z,1544017942.374 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T13:52:22.374Z,1544017942.374 [DropWeight] No Fault, FailCount= 1 2018-12-05T13:52:48.284Z,1544017968.284 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T13:52:48.285Z,1544017968.285 [Default:CheckIn:C.Wait] Stopped 2018-12-05T13:52:48.285Z,1544017968.285 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T13:52:48.285Z,1544017968.285 [Default:CheckIn:D] Running Loop=1 2018-12-05T13:52:48.695Z,1544017968.695 [Default:CheckIn:D] Stopped 2018-12-05T13:52:48.695Z,1544017968.695 [Default:CheckIn:E] Running Loop=1 2018-12-05T13:52:49.095Z,1544017969.095 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2437.944531 min 2018-12-05T13:52:49.095Z,1544017969.095 [Default:CheckIn:E] Stopped 2018-12-05T13:52:49.095Z,1544017969.095 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T13:52:49.095Z,1544017969.095 [Default:CheckIn] Stopped 2018-12-05T13:52:49.095Z,1544017969.095 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T13:52:49.096Z,1544017969.096 [Default:CheckIn](INFO): Running loop #237 2018-12-05T13:52:49.096Z,1544017969.096 [Default:CheckIn] Running Loop=237 2018-12-05T13:52:49.096Z,1544017969.096 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T13:52:49.096Z,1544017969.096 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T13:52:49.859Z,1544017969.859 [NAL9602](INFO): Powering up 2018-12-05T13:52:58.288Z,1544017978.288 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:52:58.288Z,1544017978.288 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-05T13:52:58.288Z,1544017978.288 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:52:58.290Z,1544017978.290 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:52:58.291Z,1544017978.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-05T13:52:58.291Z,1544017978.291 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:52:58.304Z,1544017978.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:52:58.304Z,1544017978.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:52:58.706Z,1544017978.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:52:58.706Z,1544017978.706 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-05T13:52:58.707Z,1544017978.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:52:58.707Z,1544017978.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-05T13:52:59.078Z,1544017979.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:52:59.079Z,1544017979.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:52:59.079Z,1544017979.079 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:52:59.079Z,1544017979.079 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:52:59.080Z,1544017979.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:52:59.080Z,1544017979.080 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:53:01.064Z,1544017981.064 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:53:01.864Z,1544017981.864 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T13:53:01.864Z,1544017981.864 [NAL9602] Data Fault, FailCount= 3 2018-12-05T13:53:01.864Z,1544017981.864 [NAL9602](ERROR): Data Fault 2018-12-05T13:53:01.929Z,1544017981.929 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T13:53:02.264Z,1544017982.264 [NAL9602](INFO): Powering down 2018-12-05T13:53:03.112Z,1544017983.112 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T13:53:03.112Z,1544017983.112 [NAL9602] No Fault, FailCount= 3 2018-12-05T13:53:32.623Z,1544018012.623 [NAL9602](INFO): Powering up NAL9602 2018-12-05T13:53:44.364Z,1544018024.364 [NAL9602](INFO): NAL9602 initialized 2018-12-05T13:54:59.194Z,1544018099.194 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:54:59.194Z,1544018099.194 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-05T13:54:59.194Z,1544018099.194 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:54:59.196Z,1544018099.196 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:54:59.196Z,1544018099.196 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-05T13:54:59.196Z,1544018099.196 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:54:59.211Z,1544018099.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:54:59.211Z,1544018099.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:54:59.598Z,1544018099.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:54:59.614Z,1544018099.614 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-05T13:54:59.615Z,1544018099.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:54:59.615Z,1544018099.615 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-05T13:54:59.991Z,1544018099.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:54:59.991Z,1544018099.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:54:59.992Z,1544018099.992 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:54:59.992Z,1544018099.992 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:54:59.992Z,1544018099.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:54:59.993Z,1544018099.993 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:57:00.310Z,1544018220.310 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:57:00.310Z,1544018220.310 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-05T13:57:00.311Z,1544018220.311 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:57:00.313Z,1544018220.313 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:57:00.313Z,1544018220.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-05T13:57:00.313Z,1544018220.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:57:00.365Z,1544018220.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:57:00.365Z,1544018220.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:57:00.754Z,1544018220.754 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:57:00.754Z,1544018220.754 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-05T13:57:00.755Z,1544018220.755 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:57:00.755Z,1544018220.755 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-05T13:57:01.101Z,1544018221.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:57:01.101Z,1544018221.101 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:57:01.101Z,1544018221.101 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:57:01.102Z,1544018221.102 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:57:01.104Z,1544018221.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:57:01.104Z,1544018221.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:57:50.339Z,1544018270.339 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T13:52:49.1Z 2018-12-05T13:57:50.339Z,1544018270.339 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T13:57:50.339Z,1544018270.339 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T13:57:55.348Z,1544018275.348 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0708.lzma 2018-12-05T13:57:56.142Z,1544018276.142 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0708.lzma.bak 2018-12-05T13:57:56.142Z,1544018276.142 [DataOverHttps](INFO): SBD MOMSN=8968712 2018-12-05T13:58:05.666Z,1544018285.666 [DataOverHttps](INFO): Sending 308 bytes from file Logs/20181203T211451/Express0709.lzma 2018-12-05T13:58:06.465Z,1544018286.465 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0709.lzma.bak 2018-12-05T13:58:06.465Z,1544018286.465 [DataOverHttps](INFO): SBD MOMSN=8968714 2018-12-05T13:58:07.849Z,1544018287.849 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T13:58:07.849Z,1544018287.849 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T13:58:07.849Z,1544018287.849 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T13:58:48.232Z,1544018328.232 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T13:59:01.457Z,1544018341.457 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:59:01.457Z,1544018341.457 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-05T13:59:01.457Z,1544018341.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T13:59:01.459Z,1544018341.459 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T13:59:01.459Z,1544018341.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-05T13:59:01.459Z,1544018341.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T13:59:01.472Z,1544018341.472 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T13:59:01.472Z,1544018341.472 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T13:59:01.874Z,1544018341.874 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T13:59:01.874Z,1544018341.874 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-05T13:59:01.874Z,1544018341.874 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T13:59:01.875Z,1544018341.875 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-05T13:59:02.257Z,1544018342.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T13:59:02.257Z,1544018342.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:59:02.257Z,1544018342.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:59:02.258Z,1544018342.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T13:59:02.258Z,1544018342.258 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T13:59:02.259Z,1544018342.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T13:59:18.636Z,1544018358.636 [NAL9602](INFO): Powering down 2018-12-05T14:01:02.346Z,1544018462.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:01:02.347Z,1544018462.347 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-05T14:01:02.347Z,1544018462.347 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:01:02.349Z,1544018462.349 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:01:02.349Z,1544018462.349 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-05T14:01:02.349Z,1544018462.349 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:01:02.362Z,1544018462.362 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:01:02.362Z,1544018462.362 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:01:02.761Z,1544018462.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:01:02.761Z,1544018462.761 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-05T14:01:02.762Z,1544018462.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:01:02.762Z,1544018462.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-05T14:01:03.151Z,1544018463.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:01:03.152Z,1544018463.152 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:01:03.152Z,1544018463.152 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:01:03.153Z,1544018463.153 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:01:03.153Z,1544018463.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:01:03.153Z,1544018463.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:03:03.490Z,1544018583.490 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:03:03.490Z,1544018583.490 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-05T14:03:03.490Z,1544018583.490 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:03:03.492Z,1544018583.492 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:03:03.492Z,1544018583.492 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-05T14:03:03.493Z,1544018583.493 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:03:03.506Z,1544018583.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:03:03.506Z,1544018583.506 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:03:03.902Z,1544018583.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:03:03.902Z,1544018583.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-05T14:03:03.903Z,1544018583.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:03:03.903Z,1544018583.903 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-05T14:03:04.285Z,1544018584.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:03:04.285Z,1544018584.285 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:03:04.285Z,1544018584.285 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:03:04.286Z,1544018584.286 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:03:04.286Z,1544018584.286 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:03:04.287Z,1544018584.287 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:03:08.289Z,1544018588.289 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T14:03:08.289Z,1544018588.289 [Default:CheckIn:C.Wait] Stopped 2018-12-05T14:03:08.289Z,1544018588.289 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T14:03:08.289Z,1544018588.289 [Default:CheckIn:D] Running Loop=1 2018-12-05T14:03:08.694Z,1544018588.694 [Default:CheckIn:D] Stopped 2018-12-05T14:03:08.694Z,1544018588.694 [Default:CheckIn:E] Running Loop=1 2018-12-05T14:03:09.089Z,1544018589.089 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2448.277865 min 2018-12-05T14:03:09.090Z,1544018589.090 [Default:CheckIn:E] Stopped 2018-12-05T14:03:09.090Z,1544018589.090 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T14:03:09.090Z,1544018589.090 [Default:CheckIn] Stopped 2018-12-05T14:03:09.090Z,1544018589.090 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T14:03:09.090Z,1544018589.090 [Default:CheckIn](INFO): Running loop #238 2018-12-05T14:03:09.090Z,1544018589.090 [Default:CheckIn] Running Loop=238 2018-12-05T14:03:09.090Z,1544018589.090 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T14:03:09.091Z,1544018589.091 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T14:03:09.864Z,1544018589.864 [NAL9602](INFO): Powering up 2018-12-05T14:03:21.064Z,1544018601.064 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:05:04.519Z,1544018704.519 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:05:04.519Z,1544018704.519 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-05T14:05:04.519Z,1544018704.519 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:05:04.521Z,1544018704.521 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:05:04.521Z,1544018704.521 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-05T14:05:04.521Z,1544018704.521 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:05:04.535Z,1544018704.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:05:04.535Z,1544018704.535 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:05:04.939Z,1544018704.939 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:05:04.939Z,1544018704.939 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-05T14:05:04.940Z,1544018704.940 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:05:04.940Z,1544018704.940 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-05T14:05:05.313Z,1544018705.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:05:05.314Z,1544018705.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:05:05.314Z,1544018705.314 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:05:05.314Z,1544018705.314 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:05:05.315Z,1544018705.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:05:05.315Z,1544018705.315 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:07:05.366Z,1544018825.366 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:07:05.366Z,1544018825.366 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-05T14:07:05.367Z,1544018825.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:07:05.369Z,1544018825.369 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:07:05.369Z,1544018825.369 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-05T14:07:05.369Z,1544018825.369 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:07:05.416Z,1544018825.416 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:07:05.417Z,1544018825.417 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:07:05.782Z,1544018825.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:07:05.783Z,1544018825.783 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-05T14:07:05.783Z,1544018825.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:07:05.783Z,1544018825.783 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-05T14:07:06.155Z,1544018826.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:07:06.156Z,1544018826.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:07:06.156Z,1544018826.156 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:07:06.156Z,1544018826.156 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:07:06.157Z,1544018826.157 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:07:06.157Z,1544018826.157 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:08:10.146Z,1544018890.146 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T14:03:09.1Z 2018-12-05T14:08:10.147Z,1544018890.147 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T14:08:10.147Z,1544018890.147 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T14:08:15.104Z,1544018895.104 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0711.lzma 2018-12-05T14:08:15.887Z,1544018895.887 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0711.lzma.bak 2018-12-05T14:08:15.887Z,1544018895.887 [DataOverHttps](INFO): SBD MOMSN=8968738 2018-12-05T14:08:25.221Z,1544018905.221 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T14:08:25.293Z,1544018905.293 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0712.lzma 2018-12-05T14:08:26.093Z,1544018906.093 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0712.lzma.bak 2018-12-05T14:08:26.093Z,1544018906.093 [DataOverHttps](INFO): SBD MOMSN=8968740 2018-12-05T14:08:27.470Z,1544018907.470 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T14:08:27.470Z,1544018907.470 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T14:08:27.470Z,1544018907.470 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T14:08:55.440Z,1544018935.440 [NAL9602](INFO): Powering down 2018-12-05T14:09:06.321Z,1544018946.321 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:09:06.321Z,1544018946.321 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-05T14:09:06.321Z,1544018946.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:09:06.324Z,1544018946.324 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:09:06.324Z,1544018946.324 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-05T14:09:06.324Z,1544018946.324 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:09:06.337Z,1544018946.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:09:06.338Z,1544018946.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:09:06.451Z,1544018946.451 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:09:06.451Z,1544018946.451 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-05T14:09:06.452Z,1544018946.452 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:09:06.452Z,1544018946.452 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-05T14:09:06.786Z,1544018946.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:09:06.786Z,1544018946.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:09:06.787Z,1544018946.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:09:06.787Z,1544018946.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:09:06.788Z,1544018946.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:09:06.788Z,1544018946.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:11:06.814Z,1544019066.814 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:11:06.814Z,1544019066.814 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-05T14:11:06.814Z,1544019066.814 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:11:06.816Z,1544019066.816 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:11:06.817Z,1544019066.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-05T14:11:06.817Z,1544019066.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:11:06.830Z,1544019066.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:11:06.831Z,1544019066.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:11:07.239Z,1544019067.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:11:07.240Z,1544019067.240 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-05T14:11:07.240Z,1544019067.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:11:07.240Z,1544019067.240 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-05T14:11:07.613Z,1544019067.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:11:07.614Z,1544019067.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:11:07.614Z,1544019067.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:11:07.615Z,1544019067.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:11:07.615Z,1544019067.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:11:07.615Z,1544019067.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:13:07.898Z,1544019187.898 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:13:07.898Z,1544019187.898 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-05T14:13:07.898Z,1544019187.898 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:13:07.900Z,1544019187.900 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:13:07.900Z,1544019187.900 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-05T14:13:07.900Z,1544019187.900 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:13:07.913Z,1544019187.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:13:07.914Z,1544019187.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:13:08.314Z,1544019188.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:13:08.315Z,1544019188.315 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-05T14:13:08.315Z,1544019188.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:13:08.315Z,1544019188.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-05T14:13:08.686Z,1544019188.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:13:08.687Z,1544019188.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:13:08.687Z,1544019188.687 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:13:08.687Z,1544019188.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:13:08.688Z,1544019188.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:13:08.688Z,1544019188.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:13:27.628Z,1544019207.628 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T14:13:27.628Z,1544019207.628 [Default:CheckIn:C.Wait] Stopped 2018-12-05T14:13:27.628Z,1544019207.628 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T14:13:27.628Z,1544019207.628 [Default:CheckIn:D] Running Loop=1 2018-12-05T14:13:28.029Z,1544019208.029 [Default:CheckIn:D] Stopped 2018-12-05T14:13:28.029Z,1544019208.029 [Default:CheckIn:E] Running Loop=1 2018-12-05T14:13:28.425Z,1544019208.425 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2458.600000 min 2018-12-05T14:13:28.425Z,1544019208.425 [Default:CheckIn:E] Stopped 2018-12-05T14:13:28.425Z,1544019208.425 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T14:13:28.425Z,1544019208.425 [Default:CheckIn] Stopped 2018-12-05T14:13:28.426Z,1544019208.426 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T14:13:28.426Z,1544019208.426 [Default:CheckIn](INFO): Running loop #239 2018-12-05T14:13:28.426Z,1544019208.426 [Default:CheckIn] Running Loop=239 2018-12-05T14:13:28.426Z,1544019208.426 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T14:13:28.427Z,1544019208.427 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T14:13:29.189Z,1544019209.189 [NAL9602](INFO): Powering up 2018-12-05T14:13:39.992Z,1544019219.992 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:13:40.792Z,1544019220.792 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T14:13:40.792Z,1544019220.792 [NAL9602] Data Fault, FailCount= 4 2018-12-05T14:13:40.792Z,1544019220.792 [NAL9602](ERROR): Data Fault 2018-12-05T14:13:40.862Z,1544019220.862 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T14:13:41.189Z,1544019221.189 [NAL9602](INFO): Powering down 2018-12-05T14:13:42.048Z,1544019222.048 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T14:13:42.048Z,1544019222.048 [NAL9602] No Fault, FailCount= 4 2018-12-05T14:14:11.268Z,1544019251.268 [NAL9602](INFO): Powering up NAL9602 2018-12-05T14:14:23.627Z,1544019263.627 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:15:08.856Z,1544019308.856 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:15:08.856Z,1544019308.856 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-05T14:15:08.856Z,1544019308.856 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:15:08.858Z,1544019308.858 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:15:08.858Z,1544019308.858 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-05T14:15:08.858Z,1544019308.858 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:15:08.872Z,1544019308.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:15:08.872Z,1544019308.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:15:09.282Z,1544019309.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:15:09.282Z,1544019309.282 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-05T14:15:09.286Z,1544019309.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:15:09.287Z,1544019309.287 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-05T14:15:09.658Z,1544019309.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:15:09.659Z,1544019309.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:15:09.659Z,1544019309.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:15:09.659Z,1544019309.659 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:15:09.660Z,1544019309.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:15:09.660Z,1544019309.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:17:09.782Z,1544019429.782 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:17:09.782Z,1544019429.782 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-05T14:17:09.782Z,1544019429.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:17:09.784Z,1544019429.784 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:17:09.784Z,1544019429.784 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-05T14:17:09.784Z,1544019429.784 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:17:09.798Z,1544019429.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:17:09.798Z,1544019429.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:17:10.178Z,1544019430.178 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:17:10.179Z,1544019430.179 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-05T14:17:10.179Z,1544019430.179 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:17:10.179Z,1544019430.179 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-05T14:17:10.566Z,1544019430.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:17:10.566Z,1544019430.566 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:17:10.567Z,1544019430.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:17:10.567Z,1544019430.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:17:10.568Z,1544019430.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:17:10.568Z,1544019430.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:18:29.676Z,1544019509.676 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T14:13:28.4Z 2018-12-05T14:18:29.676Z,1544019509.676 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T14:18:29.676Z,1544019509.676 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T14:18:34.806Z,1544019514.806 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0714.lzma 2018-12-05T14:18:35.605Z,1544019515.605 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0714.lzma.bak 2018-12-05T14:18:35.605Z,1544019515.605 [DataOverHttps](INFO): SBD MOMSN=8968761 2018-12-05T14:18:45.029Z,1544019525.029 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0715.lzma 2018-12-05T14:18:45.821Z,1544019525.821 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0715.lzma.bak 2018-12-05T14:18:45.821Z,1544019525.821 [DataOverHttps](INFO): SBD MOMSN=8968763 2018-12-05T14:18:47.441Z,1544019527.441 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T14:18:47.441Z,1544019527.441 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T14:18:47.442Z,1544019527.442 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T14:19:10.872Z,1544019550.872 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:19:10.872Z,1544019550.872 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-05T14:19:10.872Z,1544019550.872 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:19:10.874Z,1544019550.874 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:19:10.874Z,1544019550.874 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-05T14:19:10.874Z,1544019550.874 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:19:10.887Z,1544019550.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:19:10.888Z,1544019550.888 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:19:11.294Z,1544019551.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:19:11.294Z,1544019551.294 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-05T14:19:11.295Z,1544019551.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:19:11.295Z,1544019551.295 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-05T14:19:11.690Z,1544019551.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:19:11.691Z,1544019551.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:19:11.691Z,1544019551.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:19:11.691Z,1544019551.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:19:11.692Z,1544019551.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:19:11.692Z,1544019551.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:19:26.504Z,1544019566.504 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T14:19:57.303Z,1544019597.303 [NAL9602](INFO): Powering down 2018-12-05T14:21:12.050Z,1544019672.050 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:21:12.050Z,1544019672.050 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-05T14:21:12.050Z,1544019672.050 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:21:12.052Z,1544019672.052 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:21:12.052Z,1544019672.052 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-05T14:21:12.053Z,1544019672.053 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:21:12.066Z,1544019672.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:21:12.066Z,1544019672.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:21:12.474Z,1544019672.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:21:12.474Z,1544019672.474 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-05T14:21:12.475Z,1544019672.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:21:12.475Z,1544019672.475 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-05T14:21:12.849Z,1544019672.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:21:12.850Z,1544019672.850 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:21:12.850Z,1544019672.850 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:21:12.851Z,1544019672.851 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:21:12.851Z,1544019672.851 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:21:12.851Z,1544019672.851 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:22:23.805Z,1544019743.805 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T14:22:23.805Z,1544019743.805 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T14:22:23.805Z,1544019743.805 [DropWeight](ERROR): Hardware Fault 2018-12-05T14:22:23.875Z,1544019743.875 [CBIT](INFO): Critical error at 20181205T142223 2018-12-05T14:22:23.878Z,1544019743.878 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T14:22:23.878Z,1544019743.878 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T14:22:24.241Z,1544019744.241 [CBIT](INFO): Critical error at 20181205T142223 2018-12-05T14:23:12.987Z,1544019792.987 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:23:12.987Z,1544019792.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-05T14:23:12.987Z,1544019792.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:23:12.989Z,1544019792.989 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:23:12.989Z,1544019792.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-05T14:23:12.989Z,1544019792.989 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:23:13.003Z,1544019793.003 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:23:13.004Z,1544019793.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:23:13.397Z,1544019793.397 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:23:13.397Z,1544019793.397 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-05T14:23:13.398Z,1544019793.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:23:13.398Z,1544019793.398 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-05T14:23:13.780Z,1544019793.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:23:13.781Z,1544019793.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:23:13.781Z,1544019793.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:23:13.781Z,1544019793.781 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:23:13.782Z,1544019793.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:23:13.782Z,1544019793.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:23:47.742Z,1544019827.742 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T14:23:47.742Z,1544019827.742 [Default:CheckIn:C.Wait] Stopped 2018-12-05T14:23:47.742Z,1544019827.742 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T14:23:47.742Z,1544019827.742 [Default:CheckIn:D] Running Loop=1 2018-12-05T14:23:48.143Z,1544019828.143 [Default:CheckIn:D] Stopped 2018-12-05T14:23:48.143Z,1544019828.143 [Default:CheckIn:E] Running Loop=1 2018-12-05T14:23:48.543Z,1544019828.543 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2468.935417 min 2018-12-05T14:23:48.544Z,1544019828.544 [Default:CheckIn:E] Stopped 2018-12-05T14:23:48.544Z,1544019828.544 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T14:23:48.544Z,1544019828.544 [Default:CheckIn] Stopped 2018-12-05T14:23:48.544Z,1544019828.544 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T14:23:48.544Z,1544019828.544 [Default:CheckIn](INFO): Running loop #240 2018-12-05T14:23:48.544Z,1544019828.544 [Default:CheckIn] Running Loop=240 2018-12-05T14:23:48.544Z,1544019828.544 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T14:23:48.545Z,1544019828.545 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T14:23:49.322Z,1544019829.322 [NAL9602](INFO): Powering up 2018-12-05T14:24:00.519Z,1544019840.519 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:24:32.493Z,1544019872.493 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T14:24:32.566Z,1544019872.566 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T14:24:32.566Z,1544019872.566 [NAL9602] Data Fault, FailCount= 5 2018-12-05T14:24:32.566Z,1544019872.566 [NAL9602](ERROR): Data Fault 2018-12-05T14:24:32.600Z,1544019872.600 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T14:24:32.601Z,1544019872.601 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T14:24:32.899Z,1544019872.899 [NAL9602](INFO): Powering down 2018-12-05T14:24:32.956Z,1544019872.956 [CBIT](INFO): Critical error at 20181205T142432 2018-12-05T14:25:13.840Z,1544019913.840 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:25:13.840Z,1544019913.840 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-05T14:25:13.840Z,1544019913.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:25:13.842Z,1544019913.842 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:25:13.842Z,1544019913.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-05T14:25:13.842Z,1544019913.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:25:13.856Z,1544019913.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:25:13.856Z,1544019913.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:25:14.261Z,1544019914.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:25:14.262Z,1544019914.262 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-05T14:25:14.262Z,1544019914.262 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:25:14.262Z,1544019914.262 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-05T14:25:14.642Z,1544019914.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:25:14.642Z,1544019914.642 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:25:14.643Z,1544019914.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:25:14.643Z,1544019914.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:25:14.644Z,1544019914.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:25:14.644Z,1544019914.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:26:32.616Z,1544019992.616 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T14:26:32.616Z,1544019992.616 [NAL9602] No Fault, FailCount= 5 2018-12-05T14:26:32.979Z,1544019992.979 [NAL9602](INFO): Powering up NAL9602 2018-12-05T14:26:44.179Z,1544020004.179 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:26:44.979Z,1544020004.979 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T14:26:44.980Z,1544020004.980 [NAL9602] Data Fault, FailCount= 1 2018-12-05T14:26:44.980Z,1544020004.980 [NAL9602](ERROR): Data Fault 2018-12-05T14:26:45.052Z,1544020005.052 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T14:26:45.379Z,1544020005.379 [NAL9602](INFO): Powering down 2018-12-05T14:26:46.231Z,1544020006.231 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T14:26:46.231Z,1544020006.231 [NAL9602] No Fault, FailCount= 1 2018-12-05T14:27:14.974Z,1544020034.974 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:27:14.974Z,1544020034.974 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-05T14:27:14.974Z,1544020034.974 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:27:14.976Z,1544020034.976 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:27:14.976Z,1544020034.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-05T14:27:14.977Z,1544020034.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:27:14.990Z,1544020034.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:27:14.990Z,1544020034.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:27:15.390Z,1544020035.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:27:15.390Z,1544020035.390 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-05T14:27:15.391Z,1544020035.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:27:15.391Z,1544020035.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-05T14:27:15.743Z,1544020035.743 [NAL9602](INFO): Powering up NAL9602 2018-12-05T14:27:15.780Z,1544020035.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:27:15.780Z,1544020035.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:27:15.781Z,1544020035.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:27:15.781Z,1544020035.781 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:27:15.782Z,1544020035.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:27:15.782Z,1544020035.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:27:26.943Z,1544020046.943 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:28:49.525Z,1544020129.525 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T14:23:48.5Z 2018-12-05T14:28:49.525Z,1544020129.525 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T14:28:49.525Z,1544020129.525 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T14:28:54.449Z,1544020134.449 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181203T211451/Courier0717.lzma 2018-12-05T14:28:55.249Z,1544020135.249 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0717.lzma.bak 2018-12-05T14:28:55.249Z,1544020135.249 [DataOverHttps](INFO): SBD MOMSN=8968785 2018-12-05T14:29:04.811Z,1544020144.811 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T14:29:04.865Z,1544020144.865 [DataOverHttps](INFO): Sending 347 bytes from file Logs/20181203T211451/Express0718.lzma 2018-12-05T14:29:05.665Z,1544020145.665 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0718.lzma.bak 2018-12-05T14:29:05.665Z,1544020145.665 [DataOverHttps](INFO): SBD MOMSN=8968790 2018-12-05T14:29:07.007Z,1544020147.007 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T14:29:07.007Z,1544020147.007 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T14:29:07.007Z,1544020147.007 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T14:29:15.811Z,1544020155.811 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:29:15.811Z,1544020155.811 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-05T14:29:15.811Z,1544020155.811 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:29:15.813Z,1544020155.813 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:29:15.813Z,1544020155.813 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-05T14:29:15.813Z,1544020155.813 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:29:15.826Z,1544020155.826 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:29:15.827Z,1544020155.827 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:29:16.222Z,1544020156.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:29:16.223Z,1544020156.223 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-05T14:29:16.223Z,1544020156.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:29:16.223Z,1544020156.223 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-05T14:29:16.619Z,1544020156.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:29:16.620Z,1544020156.620 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:29:16.621Z,1544020156.621 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:29:16.622Z,1544020156.622 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:29:16.624Z,1544020156.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:29:16.624Z,1544020156.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:29:34.979Z,1544020174.979 [NAL9602](INFO): Powering down 2018-12-05T14:31:16.766Z,1544020276.766 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:31:16.766Z,1544020276.766 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-05T14:31:16.766Z,1544020276.766 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:31:16.769Z,1544020276.769 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:31:16.769Z,1544020276.769 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-05T14:31:16.769Z,1544020276.769 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:31:16.783Z,1544020276.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:31:16.783Z,1544020276.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:31:17.177Z,1544020277.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:31:17.177Z,1544020277.177 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-05T14:31:17.178Z,1544020277.178 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:31:17.178Z,1544020277.178 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-05T14:31:17.567Z,1544020277.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:31:17.568Z,1544020277.568 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:31:17.568Z,1544020277.568 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:31:17.569Z,1544020277.569 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:31:17.569Z,1544020277.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:31:17.569Z,1544020277.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:33:17.872Z,1544020397.872 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:33:17.872Z,1544020397.872 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-05T14:33:17.872Z,1544020397.872 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:33:17.874Z,1544020397.874 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:33:17.874Z,1544020397.874 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-05T14:33:17.874Z,1544020397.874 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:33:17.887Z,1544020397.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:33:17.888Z,1544020397.888 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:33:18.290Z,1544020398.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:33:18.290Z,1544020398.290 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-05T14:33:18.291Z,1544020398.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:33:18.291Z,1544020398.291 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-05T14:33:18.669Z,1544020398.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:33:18.670Z,1544020398.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:33:18.670Z,1544020398.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:33:18.670Z,1544020398.670 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:33:18.671Z,1544020398.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:33:18.671Z,1544020398.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:34:07.218Z,1544020447.218 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T14:34:07.218Z,1544020447.218 [Default:CheckIn:C.Wait] Stopped 2018-12-05T14:34:07.218Z,1544020447.218 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T14:34:07.218Z,1544020447.218 [Default:CheckIn:D] Running Loop=1 2018-12-05T14:34:07.614Z,1544020447.614 [Default:CheckIn:D] Stopped 2018-12-05T14:34:07.614Z,1544020447.614 [Default:CheckIn:E] Running Loop=1 2018-12-05T14:34:08.013Z,1544020448.013 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2479.259896 min 2018-12-05T14:34:08.014Z,1544020448.014 [Default:CheckIn:E] Stopped 2018-12-05T14:34:08.014Z,1544020448.014 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T14:34:08.014Z,1544020448.014 [Default:CheckIn] Stopped 2018-12-05T14:34:08.014Z,1544020448.014 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T14:34:08.014Z,1544020448.014 [Default:CheckIn](INFO): Running loop #241 2018-12-05T14:34:08.014Z,1544020448.014 [Default:CheckIn] Running Loop=241 2018-12-05T14:34:08.014Z,1544020448.014 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T14:34:08.015Z,1544020448.015 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T14:34:08.779Z,1544020448.779 [NAL9602](INFO): Powering up 2018-12-05T14:34:19.980Z,1544020459.980 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:34:51.599Z,1544020491.599 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T14:34:51.682Z,1544020491.682 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T14:34:51.682Z,1544020491.682 [NAL9602] Data Fault, FailCount= 2 2018-12-05T14:34:51.682Z,1544020491.682 [NAL9602](ERROR): Data Fault 2018-12-05T14:34:51.734Z,1544020491.734 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T14:34:51.999Z,1544020491.999 [NAL9602](INFO): Powering down 2018-12-05T14:34:52.844Z,1544020492.844 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T14:34:52.844Z,1544020492.844 [NAL9602] No Fault, FailCount= 2 2018-12-05T14:35:18.838Z,1544020518.838 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:35:18.838Z,1544020518.838 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-05T14:35:18.838Z,1544020518.838 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:35:18.840Z,1544020518.840 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:35:18.841Z,1544020518.841 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-05T14:35:18.841Z,1544020518.841 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:35:18.854Z,1544020518.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:35:18.854Z,1544020518.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:35:19.275Z,1544020519.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:35:19.275Z,1544020519.275 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-05T14:35:19.275Z,1544020519.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:35:19.275Z,1544020519.275 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-05T14:35:19.646Z,1544020519.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:35:19.646Z,1544020519.646 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:35:19.647Z,1544020519.647 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:35:19.647Z,1544020519.647 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:35:19.647Z,1544020519.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:35:19.648Z,1544020519.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:35:22.015Z,1544020522.015 [NAL9602](INFO): Powering up NAL9602 2018-12-05T14:35:33.215Z,1544020533.215 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:37:19.934Z,1544020639.934 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:37:19.934Z,1544020639.934 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-05T14:37:19.935Z,1544020639.935 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:37:19.937Z,1544020639.937 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:37:19.937Z,1544020639.937 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-05T14:37:19.937Z,1544020639.937 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:37:19.952Z,1544020639.952 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:37:19.952Z,1544020639.952 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:37:20.345Z,1544020640.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:37:20.345Z,1544020640.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-05T14:37:20.346Z,1544020640.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:37:20.346Z,1544020640.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-05T14:37:23.586Z,1544020643.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:37:23.587Z,1544020643.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:37:23.587Z,1544020643.587 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:37:23.587Z,1544020643.587 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:37:23.588Z,1544020643.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:37:23.588Z,1544020643.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:37:24.061Z,1544020644.061 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T14:37:24.061Z,1544020644.061 [DropWeight] No Fault, FailCount= 1 2018-12-05T14:39:09.152Z,1544020749.152 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T14:34:08.0Z 2018-12-05T14:39:09.152Z,1544020749.152 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T14:39:09.152Z,1544020749.152 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T14:39:14.176Z,1544020754.176 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0720.lzma 2018-12-05T14:39:14.977Z,1544020754.977 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0720.lzma.bak 2018-12-05T14:39:14.977Z,1544020754.977 [DataOverHttps](INFO): SBD MOMSN=8968812 2018-12-05T14:39:24.592Z,1544020764.592 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T14:39:24.612Z,1544020764.612 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:39:24.612Z,1544020764.612 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-05T14:39:24.612Z,1544020764.612 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:39:24.614Z,1544020764.614 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:39:24.614Z,1544020764.614 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-05T14:39:24.614Z,1544020764.614 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:39:24.629Z,1544020764.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:39:24.629Z,1544020764.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:39:24.685Z,1544020764.685 [DataOverHttps](INFO): Sending 323 bytes from file Logs/20181203T211451/Express0721.lzma 2018-12-05T14:39:24.776Z,1544020764.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:39:24.776Z,1544020764.776 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-05T14:39:24.777Z,1544020764.777 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:39:24.777Z,1544020764.777 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-05T14:39:25.115Z,1544020765.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:39:25.116Z,1544020765.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:39:25.116Z,1544020765.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:39:25.116Z,1544020765.116 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:39:25.117Z,1544020765.117 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:39:25.117Z,1544020765.117 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:39:25.477Z,1544020765.477 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0721.lzma.bak 2018-12-05T14:39:25.477Z,1544020765.477 [DataOverHttps](INFO): SBD MOMSN=8968814 2018-12-05T14:39:26.868Z,1544020766.868 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T14:39:26.868Z,1544020766.868 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T14:39:26.868Z,1544020766.868 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T14:39:54.843Z,1544020794.843 [NAL9602](INFO): Powering down 2018-12-05T14:41:25.290Z,1544020885.290 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:41:25.290Z,1544020885.290 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-05T14:41:25.290Z,1544020885.290 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:41:25.292Z,1544020885.292 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:41:25.292Z,1544020885.292 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-05T14:41:25.293Z,1544020885.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:41:25.306Z,1544020885.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:41:25.306Z,1544020885.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:41:25.702Z,1544020885.702 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:41:25.702Z,1544020885.702 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-05T14:41:25.703Z,1544020885.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:41:25.703Z,1544020885.703 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-05T14:41:26.089Z,1544020886.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:41:26.089Z,1544020886.089 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:41:26.089Z,1544020886.089 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:41:26.090Z,1544020886.090 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:41:26.090Z,1544020886.090 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:41:26.091Z,1544020886.091 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:43:26.139Z,1544021006.139 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:43:26.139Z,1544021006.139 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-05T14:43:26.139Z,1544021006.139 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:43:26.141Z,1544021006.141 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:43:26.141Z,1544021006.141 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-05T14:43:26.141Z,1544021006.141 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:43:26.156Z,1544021006.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:43:26.156Z,1544021006.156 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:43:26.556Z,1544021006.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:43:26.556Z,1544021006.556 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-05T14:43:26.556Z,1544021006.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:43:26.557Z,1544021006.557 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-05T14:43:26.919Z,1544021006.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:43:26.919Z,1544021006.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:43:26.920Z,1544021006.920 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:43:26.920Z,1544021006.920 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:43:26.920Z,1544021006.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:43:26.921Z,1544021006.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:44:27.340Z,1544021067.340 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T14:44:27.341Z,1544021067.341 [Default:CheckIn:C.Wait] Stopped 2018-12-05T14:44:27.341Z,1544021067.341 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T14:44:27.341Z,1544021067.341 [Default:CheckIn:D] Running Loop=1 2018-12-05T14:44:27.739Z,1544021067.739 [Default:CheckIn:D] Stopped 2018-12-05T14:44:27.739Z,1544021067.739 [Default:CheckIn:E] Running Loop=1 2018-12-05T14:44:28.141Z,1544021068.141 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2489.595313 min 2018-12-05T14:44:28.141Z,1544021068.141 [Default:CheckIn:E] Stopped 2018-12-05T14:44:28.142Z,1544021068.142 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T14:44:28.142Z,1544021068.142 [Default:CheckIn] Stopped 2018-12-05T14:44:28.142Z,1544021068.142 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T14:44:28.142Z,1544021068.142 [Default:CheckIn](INFO): Running loop #242 2018-12-05T14:44:28.142Z,1544021068.142 [Default:CheckIn] Running Loop=242 2018-12-05T14:44:28.142Z,1544021068.142 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T14:44:28.142Z,1544021068.142 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T14:44:28.895Z,1544021068.895 [NAL9602](INFO): Powering up 2018-12-05T14:44:40.096Z,1544021080.096 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:44:40.900Z,1544021080.900 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T14:44:40.900Z,1544021080.900 [NAL9602] Data Fault, FailCount= 3 2018-12-05T14:44:40.900Z,1544021080.900 [NAL9602](ERROR): Data Fault 2018-12-05T14:44:40.966Z,1544021080.966 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T14:44:41.296Z,1544021081.296 [NAL9602](INFO): Powering down 2018-12-05T14:44:42.149Z,1544021082.149 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T14:44:42.149Z,1544021082.149 [NAL9602] No Fault, FailCount= 3 2018-12-05T14:45:11.668Z,1544021111.668 [NAL9602](INFO): Powering up NAL9602 2018-12-05T14:45:22.948Z,1544021122.948 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:45:26.987Z,1544021126.987 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:45:26.987Z,1544021126.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-05T14:45:26.987Z,1544021126.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:45:26.989Z,1544021126.989 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:45:26.989Z,1544021126.989 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-05T14:45:26.989Z,1544021126.989 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:45:27.027Z,1544021127.027 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:45:27.027Z,1544021127.027 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:45:27.391Z,1544021127.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:45:27.391Z,1544021127.391 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-05T14:45:27.392Z,1544021127.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:45:27.392Z,1544021127.392 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-05T14:45:27.832Z,1544021127.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:45:27.832Z,1544021127.832 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:45:27.833Z,1544021127.833 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:45:27.833Z,1544021127.833 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:45:27.833Z,1544021127.833 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:45:27.834Z,1544021127.834 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:47:28.002Z,1544021248.002 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:47:28.002Z,1544021248.002 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-05T14:47:28.002Z,1544021248.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:47:28.004Z,1544021248.004 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:47:28.004Z,1544021248.004 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-05T14:47:28.005Z,1544021248.005 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:47:28.018Z,1544021248.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:47:28.018Z,1544021248.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:47:28.427Z,1544021248.427 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:47:28.427Z,1544021248.427 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-05T14:47:28.428Z,1544021248.428 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:47:28.428Z,1544021248.428 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-05T14:47:28.798Z,1544021248.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:47:28.803Z,1544021248.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:47:28.803Z,1544021248.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:47:28.803Z,1544021248.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:47:28.804Z,1544021248.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:47:28.804Z,1544021248.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:48:26.377Z,1544021306.377 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T14:49:29.201Z,1544021369.201 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:49:29.201Z,1544021369.201 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-05T14:49:29.201Z,1544021369.201 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:49:29.203Z,1544021369.203 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:49:29.204Z,1544021369.204 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-05T14:49:29.204Z,1544021369.204 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:49:29.207Z,1544021369.207 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T14:44:28.1Z 2018-12-05T14:49:29.207Z,1544021369.207 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T14:49:29.207Z,1544021369.207 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T14:49:29.218Z,1544021369.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:49:29.218Z,1544021369.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:49:29.343Z,1544021369.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:49:29.343Z,1544021369.343 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-05T14:49:29.344Z,1544021369.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:49:29.344Z,1544021369.344 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-05T14:49:30.132Z,1544021370.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:49:30.133Z,1544021370.133 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:49:30.133Z,1544021370.133 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:49:30.134Z,1544021370.134 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:49:30.134Z,1544021370.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:49:30.134Z,1544021370.134 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:49:34.198Z,1544021374.198 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0723.lzma 2018-12-05T14:49:34.989Z,1544021374.989 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0723.lzma.bak 2018-12-05T14:49:34.989Z,1544021374.989 [DataOverHttps](INFO): SBD MOMSN=8968836 2018-12-05T14:49:44.519Z,1544021384.519 [DataOverHttps](INFO): Sending 310 bytes from file Logs/20181203T211451/Express0724.lzma 2018-12-05T14:49:45.317Z,1544021385.317 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0724.lzma.bak 2018-12-05T14:49:45.317Z,1544021385.317 [DataOverHttps](INFO): SBD MOMSN=8968838 2018-12-05T14:49:46.688Z,1544021386.688 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T14:49:46.688Z,1544021386.688 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T14:49:46.688Z,1544021386.688 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T14:50:26.311Z,1544021426.311 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T14:50:57.100Z,1544021457.100 [NAL9602](INFO): Powering down 2018-12-05T14:51:30.286Z,1544021490.286 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:51:30.286Z,1544021490.286 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-05T14:51:30.286Z,1544021490.286 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:51:30.288Z,1544021490.288 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:51:30.288Z,1544021490.288 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-05T14:51:30.288Z,1544021490.288 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:51:30.332Z,1544021490.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:51:30.332Z,1544021490.332 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:51:30.706Z,1544021490.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:51:30.706Z,1544021490.706 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-05T14:51:30.707Z,1544021490.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:51:30.707Z,1544021490.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-05T14:51:31.092Z,1544021491.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:51:31.093Z,1544021491.093 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:51:31.093Z,1544021491.093 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:51:31.093Z,1544021491.093 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:51:31.094Z,1544021491.094 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:51:31.094Z,1544021491.094 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:53:31.281Z,1544021611.281 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:53:31.281Z,1544021611.281 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-05T14:53:31.282Z,1544021611.282 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:53:31.284Z,1544021611.284 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:53:31.284Z,1544021611.284 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-05T14:53:31.284Z,1544021611.284 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:53:31.297Z,1544021611.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:53:31.297Z,1544021611.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:53:31.684Z,1544021611.684 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:53:31.684Z,1544021611.684 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-05T14:53:31.684Z,1544021611.684 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:53:31.684Z,1544021611.684 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-05T14:53:32.072Z,1544021612.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:53:32.073Z,1544021612.073 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:53:32.073Z,1544021612.073 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:53:32.073Z,1544021612.073 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:53:32.074Z,1544021612.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:53:32.074Z,1544021612.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:54:47.173Z,1544021687.173 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T14:54:47.173Z,1544021687.173 [Default:CheckIn:C.Wait] Stopped 2018-12-05T14:54:47.173Z,1544021687.173 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T14:54:47.173Z,1544021687.173 [Default:CheckIn:D] Running Loop=1 2018-12-05T14:54:47.570Z,1544021687.570 [Default:CheckIn:D] Stopped 2018-12-05T14:54:47.570Z,1544021687.570 [Default:CheckIn:E] Running Loop=1 2018-12-05T14:54:47.969Z,1544021687.969 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2499.925781 min 2018-12-05T14:54:47.969Z,1544021687.969 [Default:CheckIn:E] Stopped 2018-12-05T14:54:47.969Z,1544021687.969 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T14:54:47.969Z,1544021687.969 [Default:CheckIn] Stopped 2018-12-05T14:54:47.969Z,1544021687.969 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T14:54:47.970Z,1544021687.970 [Default:CheckIn](INFO): Running loop #243 2018-12-05T14:54:47.970Z,1544021687.970 [Default:CheckIn] Running Loop=243 2018-12-05T14:54:47.970Z,1544021687.970 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T14:54:47.970Z,1544021687.970 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T14:54:48.739Z,1544021688.739 [NAL9602](INFO): Powering up 2018-12-05T14:54:59.940Z,1544021699.940 [NAL9602](INFO): NAL9602 initialized 2018-12-05T14:55:32.467Z,1544021732.467 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:55:32.468Z,1544021732.468 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-05T14:55:32.468Z,1544021732.468 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:55:32.470Z,1544021732.470 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:55:32.470Z,1544021732.470 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-05T14:55:32.470Z,1544021732.470 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:55:32.514Z,1544021732.514 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:55:32.515Z,1544021732.515 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:55:32.910Z,1544021732.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:55:32.910Z,1544021732.910 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-05T14:55:32.911Z,1544021732.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:55:32.911Z,1544021732.911 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-05T14:55:33.271Z,1544021733.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:55:33.272Z,1544021733.272 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:55:33.272Z,1544021733.272 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:55:33.272Z,1544021733.272 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:55:33.273Z,1544021733.273 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:55:33.273Z,1544021733.273 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:57:33.358Z,1544021853.358 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:57:33.359Z,1544021853.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-05T14:57:33.359Z,1544021853.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:57:33.361Z,1544021853.361 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:57:33.361Z,1544021853.361 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-05T14:57:33.361Z,1544021853.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:57:33.419Z,1544021853.419 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:57:33.419Z,1544021853.419 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:57:33.773Z,1544021853.773 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:57:33.773Z,1544021853.773 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-05T14:57:33.774Z,1544021853.774 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:57:33.774Z,1544021853.774 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-05T14:57:34.146Z,1544021854.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:57:34.146Z,1544021854.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:57:34.147Z,1544021854.147 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:57:34.147Z,1544021854.147 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:57:34.148Z,1544021854.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:57:34.148Z,1544021854.148 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:59:34.250Z,1544021974.250 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:59:34.250Z,1544021974.250 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-05T14:59:34.251Z,1544021974.251 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T14:59:34.253Z,1544021974.253 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T14:59:34.253Z,1544021974.253 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-05T14:59:34.253Z,1544021974.253 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T14:59:34.296Z,1544021974.296 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T14:59:34.296Z,1544021974.296 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T14:59:34.662Z,1544021974.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T14:59:34.662Z,1544021974.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-05T14:59:34.679Z,1544021974.679 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T14:59:34.679Z,1544021974.679 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-05T14:59:35.041Z,1544021975.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T14:59:35.042Z,1544021975.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:59:35.042Z,1544021975.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:59:35.042Z,1544021975.042 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T14:59:35.043Z,1544021975.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T14:59:35.043Z,1544021975.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T14:59:49.055Z,1544021989.055 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T14:54:47.0Z 2018-12-05T14:59:49.055Z,1544021989.055 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T14:59:49.055Z,1544021989.055 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T14:59:53.966Z,1544021993.966 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0726.lzma 2018-12-05T14:59:54.765Z,1544021994.765 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0726.lzma.bak 2018-12-05T14:59:54.766Z,1544021994.766 [DataOverHttps](INFO): SBD MOMSN=8968864 2018-12-05T15:00:04.192Z,1544022004.192 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T15:00:04.266Z,1544022004.266 [DataOverHttps](INFO): Sending 289 bytes from file Logs/20181203T211451/Express0727.lzma 2018-12-05T15:00:05.037Z,1544022005.037 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0727.lzma.bak 2018-12-05T15:00:05.037Z,1544022005.037 [DataOverHttps](INFO): SBD MOMSN=8968866 2018-12-05T15:00:06.405Z,1544022006.405 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T15:00:06.405Z,1544022006.405 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T15:00:06.406Z,1544022006.406 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T15:00:34.383Z,1544022034.383 [NAL9602](INFO): Powering down 2018-12-05T15:01:35.113Z,1544022095.113 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:01:35.113Z,1544022095.113 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-05T15:01:35.113Z,1544022095.113 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:01:35.115Z,1544022095.115 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:01:35.116Z,1544022095.116 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-05T15:01:35.116Z,1544022095.116 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:01:35.129Z,1544022095.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:01:35.129Z,1544022095.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:01:35.534Z,1544022095.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:01:35.534Z,1544022095.534 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-05T15:01:35.534Z,1544022095.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:01:35.535Z,1544022095.535 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-05T15:01:35.922Z,1544022095.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:01:35.923Z,1544022095.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:01:35.923Z,1544022095.923 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:01:35.923Z,1544022095.923 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:01:35.924Z,1544022095.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:01:35.924Z,1544022095.924 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:03:35.930Z,1544022215.930 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:03:35.930Z,1544022215.930 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-05T15:03:35.931Z,1544022215.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:03:35.933Z,1544022215.933 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:03:35.933Z,1544022215.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-05T15:03:35.933Z,1544022215.933 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:03:35.947Z,1544022215.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:03:35.947Z,1544022215.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:03:36.346Z,1544022216.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:03:36.346Z,1544022216.346 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-05T15:03:36.346Z,1544022216.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:03:36.346Z,1544022216.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-05T15:03:36.726Z,1544022216.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:03:36.727Z,1544022216.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:03:36.727Z,1544022216.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:03:36.727Z,1544022216.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:03:36.728Z,1544022216.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:03:36.728Z,1544022216.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:05:06.744Z,1544022306.744 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T15:05:06.745Z,1544022306.745 [Default:CheckIn:C.Wait] Stopped 2018-12-05T15:05:06.745Z,1544022306.745 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T15:05:06.745Z,1544022306.745 [Default:CheckIn:D] Running Loop=1 2018-12-05T15:05:07.147Z,1544022307.147 [Default:CheckIn:D] Stopped 2018-12-05T15:05:07.147Z,1544022307.147 [Default:CheckIn:E] Running Loop=1 2018-12-05T15:05:07.551Z,1544022307.551 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2510.252083 min 2018-12-05T15:05:07.552Z,1544022307.552 [Default:CheckIn:E] Stopped 2018-12-05T15:05:07.552Z,1544022307.552 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T15:05:07.552Z,1544022307.552 [Default:CheckIn] Stopped 2018-12-05T15:05:07.552Z,1544022307.552 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T15:05:07.552Z,1544022307.552 [Default:CheckIn](INFO): Running loop #244 2018-12-05T15:05:07.552Z,1544022307.552 [Default:CheckIn] Running Loop=244 2018-12-05T15:05:07.552Z,1544022307.552 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T15:05:07.552Z,1544022307.552 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T15:05:08.315Z,1544022308.315 [NAL9602](INFO): Powering up 2018-12-05T15:05:19.516Z,1544022319.516 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:05:20.316Z,1544022320.316 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T15:05:20.316Z,1544022320.316 [NAL9602] Data Fault, FailCount= 4 2018-12-05T15:05:20.316Z,1544022320.316 [NAL9602](ERROR): Data Fault 2018-12-05T15:05:20.373Z,1544022320.373 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T15:05:20.716Z,1544022320.716 [NAL9602](INFO): Powering down 2018-12-05T15:05:21.560Z,1544022321.560 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T15:05:21.560Z,1544022321.560 [NAL9602] No Fault, FailCount= 4 2018-12-05T15:05:36.801Z,1544022336.801 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:05:36.801Z,1544022336.801 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-05T15:05:36.801Z,1544022336.801 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:05:36.804Z,1544022336.804 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:05:36.804Z,1544022336.804 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-05T15:05:36.804Z,1544022336.804 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:05:36.817Z,1544022336.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:05:36.817Z,1544022336.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:05:37.223Z,1544022337.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:05:37.223Z,1544022337.223 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-05T15:05:37.224Z,1544022337.224 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:05:37.224Z,1544022337.224 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-05T15:05:37.603Z,1544022337.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:05:37.603Z,1544022337.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:05:37.604Z,1544022337.604 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:05:37.604Z,1544022337.604 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:05:37.605Z,1544022337.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:05:37.605Z,1544022337.605 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:05:50.780Z,1544022350.780 [NAL9602](INFO): Powering up NAL9602 2018-12-05T15:06:02.363Z,1544022362.363 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:07:25.515Z,1544022445.515 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T15:07:25.515Z,1544022445.515 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T15:07:25.515Z,1544022445.515 [DropWeight](ERROR): Hardware Fault 2018-12-05T15:07:25.583Z,1544022445.583 [CBIT](INFO): Critical error at 20181205T150725 2018-12-05T15:07:25.585Z,1544022445.585 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T15:07:25.586Z,1544022445.586 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T15:07:25.963Z,1544022445.963 [CBIT](INFO): Critical error at 20181205T150725 2018-12-05T15:07:37.942Z,1544022457.942 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:07:37.943Z,1544022457.943 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-05T15:07:37.943Z,1544022457.943 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:07:37.945Z,1544022457.945 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:07:37.945Z,1544022457.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-05T15:07:37.945Z,1544022457.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:07:37.959Z,1544022457.959 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:07:37.959Z,1544022457.959 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:07:38.354Z,1544022458.354 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:07:38.355Z,1544022458.355 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-05T15:07:38.355Z,1544022458.355 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:07:38.355Z,1544022458.355 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-05T15:07:38.742Z,1544022458.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:07:38.742Z,1544022458.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:07:38.743Z,1544022458.743 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:07:38.743Z,1544022458.743 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:07:38.744Z,1544022458.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:07:38.744Z,1544022458.744 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:09:38.899Z,1544022578.899 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:09:38.899Z,1544022578.899 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-05T15:09:38.899Z,1544022578.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:09:38.901Z,1544022578.901 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:09:38.901Z,1544022578.901 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-05T15:09:38.901Z,1544022578.901 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:09:38.915Z,1544022578.915 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:09:38.915Z,1544022578.915 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:09:39.327Z,1544022579.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:09:39.327Z,1544022579.327 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-05T15:09:39.327Z,1544022579.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:09:39.328Z,1544022579.328 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-05T15:09:39.734Z,1544022579.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:09:39.755Z,1544022579.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:09:39.755Z,1544022579.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:09:39.756Z,1544022579.756 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:09:39.756Z,1544022579.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:09:39.757Z,1544022579.757 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:10:08.419Z,1544022608.419 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T15:05:07.6Z 2018-12-05T15:10:08.419Z,1544022608.419 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T15:10:08.420Z,1544022608.420 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T15:10:13.550Z,1544022613.550 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181203T211451/Courier0729.lzma 2018-12-05T15:10:14.341Z,1544022614.341 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0729.lzma.bak 2018-12-05T15:10:14.341Z,1544022614.341 [DataOverHttps](INFO): SBD MOMSN=8968887 2018-12-05T15:10:23.804Z,1544022623.804 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0730.lzma 2018-12-05T15:10:24.605Z,1544022624.605 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0730.lzma.bak 2018-12-05T15:10:24.605Z,1544022624.605 [DataOverHttps](INFO): SBD MOMSN=8968891 2018-12-05T15:10:25.953Z,1544022625.953 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T15:10:25.953Z,1544022625.953 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T15:10:25.953Z,1544022625.953 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T15:11:05.398Z,1544022665.398 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T15:11:36.191Z,1544022696.191 [NAL9602](INFO): Powering down 2018-12-05T15:11:39.789Z,1544022699.789 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:11:39.789Z,1544022699.789 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-05T15:11:39.789Z,1544022699.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:11:39.791Z,1544022699.791 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:11:39.791Z,1544022699.791 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-05T15:11:39.792Z,1544022699.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:11:39.805Z,1544022699.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:11:39.805Z,1544022699.805 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:11:39.805Z,1544022699.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:11:39.806Z,1544022699.806 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:15:26.265Z,1544022926.265 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T15:15:26.265Z,1544022926.265 [Default:CheckIn:C.Wait] Stopped 2018-12-05T15:15:26.265Z,1544022926.265 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T15:15:26.265Z,1544022926.265 [Default:CheckIn:D] Running Loop=1 2018-12-05T15:15:26.663Z,1544022926.663 [Default:CheckIn:D] Stopped 2018-12-05T15:15:26.663Z,1544022926.663 [Default:CheckIn:E] Running Loop=1 2018-12-05T15:15:27.065Z,1544022927.065 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2520.577344 min 2018-12-05T15:15:27.065Z,1544022927.065 [Default:CheckIn:E] Stopped 2018-12-05T15:15:27.065Z,1544022927.065 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T15:15:27.065Z,1544022927.065 [Default:CheckIn] Stopped 2018-12-05T15:15:27.065Z,1544022927.065 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T15:15:27.065Z,1544022927.065 [Default:CheckIn](INFO): Running loop #245 2018-12-05T15:15:27.065Z,1544022927.065 [Default:CheckIn] Running Loop=245 2018-12-05T15:15:27.066Z,1544022927.066 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T15:15:27.066Z,1544022927.066 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T15:15:27.839Z,1544022927.839 [NAL9602](INFO): Powering up 2018-12-05T15:15:39.040Z,1544022939.040 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:16:10.990Z,1544022970.990 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T15:16:11.062Z,1544022971.062 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T15:16:11.062Z,1544022971.062 [NAL9602] Data Fault, FailCount= 5 2018-12-05T15:16:11.062Z,1544022971.062 [NAL9602](ERROR): Data Fault 2018-12-05T15:16:11.094Z,1544022971.094 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T15:16:11.094Z,1544022971.094 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T15:16:11.392Z,1544022971.392 [NAL9602](INFO): Powering down 2018-12-05T15:16:11.439Z,1544022971.439 [CBIT](INFO): Critical error at 20181205T151611 2018-12-05T15:18:11.411Z,1544023091.411 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T15:18:11.411Z,1544023091.411 [NAL9602] No Fault, FailCount= 5 2018-12-05T15:18:11.776Z,1544023091.776 [NAL9602](INFO): Powering up NAL9602 2018-12-05T15:18:22.976Z,1544023102.976 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:18:23.776Z,1544023103.776 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T15:18:23.776Z,1544023103.776 [NAL9602] Data Fault, FailCount= 1 2018-12-05T15:18:23.776Z,1544023103.776 [NAL9602](ERROR): Data Fault 2018-12-05T15:18:23.844Z,1544023103.844 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T15:18:24.176Z,1544023104.176 [NAL9602](INFO): Powering down 2018-12-05T15:18:25.018Z,1544023105.018 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T15:18:25.018Z,1544023105.018 [NAL9602] No Fault, FailCount= 1 2018-12-05T15:18:54.532Z,1544023134.532 [NAL9602](INFO): Powering up NAL9602 2018-12-05T15:19:05.732Z,1544023145.732 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:20:27.717Z,1544023227.717 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T15:15:27.1Z 2018-12-05T15:20:27.717Z,1544023227.717 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T15:20:27.717Z,1544023227.717 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T15:20:32.766Z,1544023232.766 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0732.lzma 2018-12-05T15:20:33.565Z,1544023233.565 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0732.lzma.bak 2018-12-05T15:20:33.566Z,1544023233.566 [DataOverHttps](INFO): SBD MOMSN=8968913 2018-12-05T15:20:43.114Z,1544023243.114 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T15:20:43.181Z,1544023243.181 [DataOverHttps](INFO): Sending 383 bytes from file Logs/20181203T211451/Express0733.lzma 2018-12-05T15:20:43.981Z,1544023243.981 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0733.lzma.bak 2018-12-05T15:20:43.981Z,1544023243.981 [DataOverHttps](INFO): SBD MOMSN=8968916 2018-12-05T15:20:45.414Z,1544023245.414 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T15:20:45.414Z,1544023245.414 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T15:20:45.414Z,1544023245.414 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T15:21:13.599Z,1544023273.599 [NAL9602](INFO): Powering down 2018-12-05T15:22:25.893Z,1544023345.893 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T15:22:25.893Z,1544023345.893 [DropWeight] No Fault, FailCount= 1 2018-12-05T15:25:45.556Z,1544023545.556 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T15:25:45.557Z,1544023545.557 [Default:CheckIn:C.Wait] Stopped 2018-12-05T15:25:45.557Z,1544023545.557 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T15:25:45.557Z,1544023545.557 [Default:CheckIn:D] Running Loop=1 2018-12-05T15:25:45.954Z,1544023545.954 [Default:CheckIn:D] Stopped 2018-12-05T15:25:45.954Z,1544023545.954 [Default:CheckIn:E] Running Loop=1 2018-12-05T15:25:46.359Z,1544023546.359 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2530.898958 min 2018-12-05T15:25:46.360Z,1544023546.360 [Default:CheckIn:E] Stopped 2018-12-05T15:25:46.360Z,1544023546.360 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T15:25:46.360Z,1544023546.360 [Default:CheckIn] Stopped 2018-12-05T15:25:46.360Z,1544023546.360 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T15:25:46.360Z,1544023546.360 [Default:CheckIn](INFO): Running loop #246 2018-12-05T15:25:46.360Z,1544023546.360 [Default:CheckIn] Running Loop=246 2018-12-05T15:25:46.360Z,1544023546.360 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T15:25:46.360Z,1544023546.360 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T15:25:47.128Z,1544023547.128 [NAL9602](INFO): Powering up 2018-12-05T15:25:58.328Z,1544023558.328 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:26:29.980Z,1544023589.980 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T15:26:30.058Z,1544023590.058 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T15:26:30.058Z,1544023590.058 [NAL9602] Data Fault, FailCount= 2 2018-12-05T15:26:30.058Z,1544023590.058 [NAL9602](ERROR): Data Fault 2018-12-05T15:26:30.138Z,1544023590.138 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T15:26:30.376Z,1544023590.376 [NAL9602](INFO): Powering down 2018-12-05T15:26:31.217Z,1544023591.217 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T15:26:31.217Z,1544023591.217 [NAL9602] No Fault, FailCount= 2 2018-12-05T15:26:41.114Z,1544023601.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:26:41.115Z,1544023601.115 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-05T15:26:41.115Z,1544023601.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:26:41.115Z,1544023601.115 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-05T15:26:41.199Z,1544023601.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:26:41.200Z,1544023601.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:26:41.200Z,1544023601.200 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:26:41.201Z,1544023601.201 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:26:41.201Z,1544023601.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:26:41.201Z,1544023601.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:27:00.729Z,1544023620.729 [NAL9602](INFO): Powering up NAL9602 2018-12-05T15:27:11.932Z,1544023631.932 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:28:41.374Z,1544023721.374 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:28:41.375Z,1544023721.375 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-05T15:28:41.375Z,1544023721.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:28:41.377Z,1544023721.377 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:28:41.377Z,1544023721.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-05T15:28:41.377Z,1544023721.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:28:41.391Z,1544023721.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:28:41.391Z,1544023721.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:28:41.801Z,1544023721.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:28:41.801Z,1544023721.801 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-05T15:28:41.802Z,1544023721.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:28:41.802Z,1544023721.802 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-05T15:28:42.159Z,1544023722.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:28:42.160Z,1544023722.160 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:28:42.160Z,1544023722.160 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:28:42.161Z,1544023722.161 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:28:42.161Z,1544023722.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:28:42.161Z,1544023722.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:30:42.168Z,1544023842.168 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:30:42.168Z,1544023842.168 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-05T15:30:42.168Z,1544023842.168 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:30:42.170Z,1544023842.170 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:30:42.170Z,1544023842.170 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-05T15:30:42.170Z,1544023842.170 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:30:42.203Z,1544023842.203 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:30:42.204Z,1544023842.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:30:42.607Z,1544023842.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:30:42.607Z,1544023842.607 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-05T15:30:42.607Z,1544023842.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:30:42.607Z,1544023842.607 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-05T15:30:42.974Z,1544023842.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:30:42.974Z,1544023842.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:30:42.975Z,1544023842.975 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:30:42.975Z,1544023842.975 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:30:42.975Z,1544023842.975 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:30:42.976Z,1544023842.976 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:30:47.699Z,1544023847.699 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T15:25:46.4Z 2018-12-05T15:30:47.699Z,1544023847.699 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T15:30:47.699Z,1544023847.699 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T15:30:52.904Z,1544023852.904 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0735.lzma 2018-12-05T15:30:53.704Z,1544023853.704 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0735.lzma.bak 2018-12-05T15:30:53.707Z,1544023853.707 [DataOverHttps](INFO): SBD MOMSN=8968934 2018-12-05T15:31:02.956Z,1544023862.956 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T15:31:03.041Z,1544023863.041 [DataOverHttps](INFO): Sending 296 bytes from file Logs/20181203T211451/Express0736.lzma 2018-12-05T15:31:03.801Z,1544023863.801 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0736.lzma.bak 2018-12-05T15:31:03.801Z,1544023863.801 [DataOverHttps](INFO): SBD MOMSN=8968936 2018-12-05T15:31:05.320Z,1544023865.320 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T15:31:05.321Z,1544023865.321 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T15:31:05.321Z,1544023865.321 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T15:31:33.400Z,1544023893.400 [NAL9602](INFO): Powering down 2018-12-05T15:32:43.349Z,1544023963.349 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:32:43.349Z,1544023963.349 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-05T15:32:43.349Z,1544023963.349 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:32:43.352Z,1544023963.352 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:32:43.352Z,1544023963.352 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-05T15:32:43.352Z,1544023963.352 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:32:43.365Z,1544023963.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:32:43.366Z,1544023963.366 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:32:43.760Z,1544023963.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:32:43.760Z,1544023963.760 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-05T15:32:43.761Z,1544023963.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:32:43.761Z,1544023963.761 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-05T15:32:44.147Z,1544023964.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:32:44.148Z,1544023964.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:32:44.148Z,1544023964.148 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:32:44.148Z,1544023964.148 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:32:44.149Z,1544023964.149 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:32:44.149Z,1544023964.149 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:34:44.234Z,1544024084.234 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:34:44.234Z,1544024084.234 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-05T15:34:44.234Z,1544024084.234 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:34:44.236Z,1544024084.236 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:34:44.236Z,1544024084.236 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-05T15:34:44.236Z,1544024084.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:34:44.250Z,1544024084.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:34:44.250Z,1544024084.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:34:44.659Z,1544024084.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:34:44.659Z,1544024084.659 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-05T15:34:44.659Z,1544024084.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:34:44.659Z,1544024084.659 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-05T15:34:45.040Z,1544024085.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:34:45.040Z,1544024085.040 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:34:45.040Z,1544024085.040 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:34:45.041Z,1544024085.041 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:34:45.041Z,1544024085.041 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:34:45.041Z,1544024085.041 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:36:05.747Z,1544024165.747 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T15:36:05.747Z,1544024165.747 [Default:CheckIn:C.Wait] Stopped 2018-12-05T15:36:05.747Z,1544024165.747 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T15:36:05.747Z,1544024165.747 [Default:CheckIn:D] Running Loop=1 2018-12-05T15:36:06.160Z,1544024166.160 [Default:CheckIn:D] Stopped 2018-12-05T15:36:06.160Z,1544024166.160 [Default:CheckIn:E] Running Loop=1 2018-12-05T15:36:06.555Z,1544024166.555 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2541.235677 min 2018-12-05T15:36:06.556Z,1544024166.556 [Default:CheckIn:E] Stopped 2018-12-05T15:36:06.556Z,1544024166.556 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T15:36:06.556Z,1544024166.556 [Default:CheckIn] Stopped 2018-12-05T15:36:06.556Z,1544024166.556 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T15:36:06.556Z,1544024166.556 [Default:CheckIn](INFO): Running loop #247 2018-12-05T15:36:06.556Z,1544024166.556 [Default:CheckIn] Running Loop=247 2018-12-05T15:36:06.556Z,1544024166.556 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T15:36:06.556Z,1544024166.556 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T15:36:07.319Z,1544024167.319 [NAL9602](INFO): Powering up 2018-12-05T15:36:18.520Z,1544024178.520 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:36:19.320Z,1544024179.320 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T15:36:19.320Z,1544024179.320 [NAL9602] Data Fault, FailCount= 3 2018-12-05T15:36:19.320Z,1544024179.320 [NAL9602](ERROR): Data Fault 2018-12-05T15:36:19.379Z,1544024179.379 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T15:36:19.720Z,1544024179.720 [NAL9602](INFO): Powering down 2018-12-05T15:36:20.574Z,1544024180.574 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T15:36:20.574Z,1544024180.574 [NAL9602] No Fault, FailCount= 3 2018-12-05T15:36:45.318Z,1544024205.318 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:36:45.318Z,1544024205.318 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-05T15:36:45.318Z,1544024205.318 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:36:45.321Z,1544024205.321 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:36:45.321Z,1544024205.321 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-05T15:36:45.321Z,1544024205.321 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:36:45.334Z,1544024205.334 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:36:45.335Z,1544024205.335 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:36:45.728Z,1544024205.728 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:36:45.728Z,1544024205.728 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-05T15:36:45.728Z,1544024205.728 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:36:45.728Z,1544024205.728 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-05T15:36:46.122Z,1544024206.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:36:46.122Z,1544024206.122 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:36:46.123Z,1544024206.123 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:36:46.123Z,1544024206.123 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:36:46.123Z,1544024206.123 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:36:46.124Z,1544024206.124 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:36:50.120Z,1544024210.120 [NAL9602](INFO): Powering up NAL9602 2018-12-05T15:37:01.256Z,1544024221.256 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:38:46.620Z,1544024326.620 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:38:46.620Z,1544024326.620 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-05T15:38:46.620Z,1544024326.620 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:38:46.622Z,1544024326.622 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:38:46.622Z,1544024326.622 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-05T15:38:46.622Z,1544024326.622 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:38:46.636Z,1544024326.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:38:46.636Z,1544024326.636 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:38:46.771Z,1544024326.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:38:46.771Z,1544024326.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-05T15:38:46.771Z,1544024326.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:38:46.772Z,1544024326.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-05T15:38:47.126Z,1544024327.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:38:47.127Z,1544024327.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:38:47.127Z,1544024327.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:38:47.127Z,1544024327.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:38:47.128Z,1544024327.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:38:47.128Z,1544024327.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:40:47.298Z,1544024447.298 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:40:47.298Z,1544024447.298 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-05T15:40:47.298Z,1544024447.298 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:40:47.300Z,1544024447.300 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:40:47.300Z,1544024447.300 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-05T15:40:47.301Z,1544024447.301 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:40:47.314Z,1544024447.314 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:40:47.314Z,1544024447.314 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:40:47.702Z,1544024447.702 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:40:47.703Z,1544024447.703 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-05T15:40:47.703Z,1544024447.703 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:40:47.703Z,1544024447.703 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-05T15:40:48.074Z,1544024448.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:40:48.094Z,1544024448.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:40:48.094Z,1544024448.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:40:48.095Z,1544024448.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:40:48.095Z,1544024448.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:40:48.096Z,1544024448.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:41:07.214Z,1544024467.214 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T15:36:06.6Z 2018-12-05T15:41:07.214Z,1544024467.214 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T15:41:07.215Z,1544024467.215 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T15:41:12.155Z,1544024472.155 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0738.lzma 2018-12-05T15:41:12.953Z,1544024472.953 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0738.lzma.bak 2018-12-05T15:41:12.953Z,1544024472.953 [DataOverHttps](INFO): SBD MOMSN=8968954 2018-12-05T15:41:22.490Z,1544024482.490 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0739.lzma 2018-12-05T15:41:23.294Z,1544024483.294 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0739.lzma.bak 2018-12-05T15:41:23.294Z,1544024483.294 [DataOverHttps](INFO): SBD MOMSN=8968956 2018-12-05T15:41:24.707Z,1544024484.707 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T15:41:24.707Z,1544024484.707 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T15:41:24.707Z,1544024484.707 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T15:42:04.692Z,1544024524.692 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T15:42:35.092Z,1544024555.092 [NAL9602](INFO): Powering down 2018-12-05T15:42:48.262Z,1544024568.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:42:48.262Z,1544024568.262 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-05T15:42:48.262Z,1544024568.262 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:42:48.264Z,1544024568.264 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:42:48.264Z,1544024568.264 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-05T15:42:48.265Z,1544024568.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:42:48.278Z,1544024568.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:42:48.278Z,1544024568.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:42:48.682Z,1544024568.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:42:48.682Z,1544024568.682 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-05T15:42:48.682Z,1544024568.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:42:48.682Z,1544024568.682 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-05T15:42:49.062Z,1544024569.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:42:49.062Z,1544024569.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:42:49.063Z,1544024569.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:42:49.063Z,1544024569.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:42:49.063Z,1544024569.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:42:49.064Z,1544024569.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:44:49.184Z,1544024689.184 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:44:49.184Z,1544024689.184 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-05T15:44:49.184Z,1544024689.184 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:44:49.186Z,1544024689.186 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:44:49.186Z,1544024689.186 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-05T15:44:49.186Z,1544024689.186 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:44:49.209Z,1544024689.209 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:44:49.210Z,1544024689.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:44:49.598Z,1544024689.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:44:49.610Z,1544024689.610 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-05T15:44:49.611Z,1544024689.611 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:44:49.611Z,1544024689.611 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-05T15:44:49.990Z,1544024689.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:44:49.990Z,1544024689.990 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:44:49.991Z,1544024689.991 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:44:49.991Z,1544024689.991 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:44:49.991Z,1544024689.991 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:44:49.992Z,1544024689.992 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:46:24.844Z,1544024784.844 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T15:46:24.844Z,1544024784.844 [Default:CheckIn:C.Wait] Stopped 2018-12-05T15:46:24.844Z,1544024784.844 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T15:46:24.844Z,1544024784.844 [Default:CheckIn:D] Running Loop=1 2018-12-05T15:46:25.252Z,1544024785.252 [Default:CheckIn:D] Stopped 2018-12-05T15:46:25.252Z,1544024785.252 [Default:CheckIn:E] Running Loop=1 2018-12-05T15:46:25.658Z,1544024785.658 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2551.553906 min 2018-12-05T15:46:25.659Z,1544024785.659 [Default:CheckIn:E] Stopped 2018-12-05T15:46:25.659Z,1544024785.659 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T15:46:25.659Z,1544024785.659 [Default:CheckIn] Stopped 2018-12-05T15:46:25.659Z,1544024785.659 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T15:46:25.659Z,1544024785.659 [Default:CheckIn](INFO): Running loop #248 2018-12-05T15:46:25.659Z,1544024785.659 [Default:CheckIn] Running Loop=248 2018-12-05T15:46:25.659Z,1544024785.659 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T15:46:25.659Z,1544024785.659 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T15:46:26.426Z,1544024786.426 [NAL9602](INFO): Powering up 2018-12-05T15:46:37.628Z,1544024797.628 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:46:50.071Z,1544024810.071 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:46:50.071Z,1544024810.071 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-05T15:46:50.071Z,1544024810.071 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:46:50.073Z,1544024810.073 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:46:50.073Z,1544024810.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-05T15:46:50.073Z,1544024810.073 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:46:50.103Z,1544024810.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:46:50.103Z,1544024810.103 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:46:50.489Z,1544024810.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:46:50.489Z,1544024810.489 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-05T15:46:50.490Z,1544024810.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:46:50.490Z,1544024810.490 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-05T15:46:50.856Z,1544024810.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:46:50.857Z,1544024810.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:46:50.857Z,1544024810.857 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:46:50.857Z,1544024810.857 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:46:50.858Z,1544024810.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:46:50.858Z,1544024810.858 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:47:09.240Z,1544024829.240 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T15:47:09.314Z,1544024829.314 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T15:47:09.314Z,1544024829.314 [NAL9602] Data Fault, FailCount= 4 2018-12-05T15:47:09.314Z,1544024829.314 [NAL9602](ERROR): Data Fault 2018-12-05T15:47:09.365Z,1544024829.365 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T15:47:09.640Z,1544024829.640 [NAL9602](INFO): Powering down 2018-12-05T15:47:10.484Z,1544024830.484 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T15:47:10.484Z,1544024830.484 [NAL9602] No Fault, FailCount= 4 2018-12-05T15:47:39.752Z,1544024859.752 [NAL9602](INFO): Powering up NAL9602 2018-12-05T15:47:50.959Z,1544024870.959 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:47:51.752Z,1544024871.752 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T15:47:51.752Z,1544024871.752 [NAL9602] Data Fault, FailCount= 5 2018-12-05T15:47:51.752Z,1544024871.752 [NAL9602](ERROR): Data Fault 2018-12-05T15:47:51.810Z,1544024871.810 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T15:47:51.810Z,1544024871.810 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T15:47:52.152Z,1544024872.152 [NAL9602](INFO): Powering down 2018-12-05T15:47:52.202Z,1544024872.202 [CBIT](INFO): Critical error at 20181205T154751 2018-12-05T15:48:50.876Z,1544024930.876 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:48:50.876Z,1544024930.876 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-05T15:48:50.876Z,1544024930.876 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:48:50.879Z,1544024930.879 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:48:50.879Z,1544024930.879 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-05T15:48:50.879Z,1544024930.879 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:48:50.892Z,1544024930.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:48:50.892Z,1544024930.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:48:51.295Z,1544024931.295 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:48:51.295Z,1544024931.295 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-05T15:48:51.296Z,1544024931.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:48:51.296Z,1544024931.296 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-05T15:48:51.726Z,1544024931.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:48:51.726Z,1544024931.726 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:48:51.727Z,1544024931.727 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:48:51.727Z,1544024931.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:48:51.728Z,1544024931.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:48:51.728Z,1544024931.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:49:51.765Z,1544024991.765 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T15:49:51.765Z,1544024991.765 [NAL9602] No Fault, FailCount= 5 2018-12-05T15:49:52.128Z,1544024992.128 [NAL9602](INFO): Powering up NAL9602 2018-12-05T15:50:03.328Z,1544025003.328 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:50:51.885Z,1544025051.885 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:50:51.885Z,1544025051.885 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-05T15:50:51.885Z,1544025051.885 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:50:51.887Z,1544025051.887 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:50:51.887Z,1544025051.887 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-05T15:50:51.887Z,1544025051.887 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:50:51.949Z,1544025051.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:50:51.949Z,1544025051.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:50:52.022Z,1544025052.022 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:50:52.022Z,1544025052.022 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-05T15:50:52.027Z,1544025052.027 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:50:52.027Z,1544025052.027 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-05T15:50:52.409Z,1544025052.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:50:52.410Z,1544025052.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:50:52.411Z,1544025052.411 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:50:52.412Z,1544025052.412 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:50:52.412Z,1544025052.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:50:52.412Z,1544025052.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:51:27.142Z,1544025087.142 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T15:46:25.7Z 2018-12-05T15:51:27.142Z,1544025087.142 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T15:51:27.143Z,1544025087.143 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T15:51:32.545Z,1544025092.545 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0741.lzma 2018-12-05T15:51:33.337Z,1544025093.337 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0741.lzma.bak 2018-12-05T15:51:33.338Z,1544025093.338 [DataOverHttps](INFO): SBD MOMSN=8968978 2018-12-05T15:51:42.964Z,1544025102.964 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T15:51:43.533Z,1544025103.533 [DataOverHttps](INFO): Sending 344 bytes from file Logs/20181203T211451/Express0742.lzma 2018-12-05T15:51:44.330Z,1544025104.330 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0742.lzma.bak 2018-12-05T15:51:44.330Z,1544025104.330 [DataOverHttps](INFO): SBD MOMSN=8968981 2018-12-05T15:51:45.711Z,1544025105.711 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T15:51:45.711Z,1544025105.711 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T15:51:45.711Z,1544025105.711 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T15:52:13.323Z,1544025133.323 [NAL9602](INFO): Powering down 2018-12-05T15:52:27.171Z,1544025147.171 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T15:52:27.171Z,1544025147.171 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T15:52:27.171Z,1544025147.171 [DropWeight](ERROR): Hardware Fault 2018-12-05T15:52:27.228Z,1544025147.228 [CBIT](INFO): Critical error at 20181205T155227 2018-12-05T15:52:27.243Z,1544025147.243 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T15:52:27.243Z,1544025147.243 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T15:52:27.624Z,1544025147.624 [CBIT](INFO): Critical error at 20181205T155227 2018-12-05T15:52:52.418Z,1544025172.418 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:52:52.419Z,1544025172.419 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-05T15:52:52.419Z,1544025172.419 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:52:52.421Z,1544025172.421 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:52:52.421Z,1544025172.421 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-05T15:52:52.421Z,1544025172.421 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:52:52.435Z,1544025172.435 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:52:52.436Z,1544025172.436 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:52:52.828Z,1544025172.828 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:52:52.828Z,1544025172.828 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-05T15:52:52.829Z,1544025172.829 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:52:52.829Z,1544025172.829 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-05T15:52:53.198Z,1544025173.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:52:53.198Z,1544025173.198 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:52:53.199Z,1544025173.199 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:52:53.199Z,1544025173.199 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:52:53.200Z,1544025173.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:52:53.200Z,1544025173.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:54:53.321Z,1544025293.321 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:54:53.321Z,1544025293.321 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-05T15:54:53.321Z,1544025293.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:54:53.323Z,1544025293.323 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:54:53.324Z,1544025293.324 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-05T15:54:53.324Z,1544025293.324 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:54:53.337Z,1544025293.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:54:53.337Z,1544025293.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:54:53.795Z,1544025293.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:54:53.795Z,1544025293.795 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-05T15:54:53.796Z,1544025293.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:54:53.796Z,1544025293.796 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-05T15:54:54.124Z,1544025294.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:54:54.125Z,1544025294.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:54:54.125Z,1544025294.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:54:54.126Z,1544025294.126 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:54:54.126Z,1544025294.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:54:54.127Z,1544025294.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:56:01.044Z,1544025361.044 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T15:56:45.867Z,1544025405.867 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T15:56:45.867Z,1544025405.867 [Default:CheckIn:C.Wait] Stopped 2018-12-05T15:56:45.867Z,1544025405.867 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T15:56:45.867Z,1544025405.867 [Default:CheckIn:D] Running Loop=1 2018-12-05T15:56:46.268Z,1544025406.268 [Default:CheckIn:D] Stopped 2018-12-05T15:56:46.268Z,1544025406.268 [Default:CheckIn:E] Running Loop=1 2018-12-05T15:56:46.675Z,1544025406.675 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2561.904167 min 2018-12-05T15:56:46.675Z,1544025406.675 [Default:CheckIn:E] Stopped 2018-12-05T15:56:46.675Z,1544025406.675 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T15:56:46.675Z,1544025406.675 [Default:CheckIn] Stopped 2018-12-05T15:56:46.675Z,1544025406.675 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T15:56:46.675Z,1544025406.675 [Default:CheckIn](INFO): Running loop #249 2018-12-05T15:56:46.675Z,1544025406.675 [Default:CheckIn] Running Loop=249 2018-12-05T15:56:46.676Z,1544025406.676 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T15:56:46.676Z,1544025406.676 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T15:56:47.439Z,1544025407.439 [NAL9602](INFO): Powering up 2018-12-05T15:56:54.264Z,1544025414.264 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:56:54.264Z,1544025414.264 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-05T15:56:54.264Z,1544025414.264 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:56:54.266Z,1544025414.266 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:56:54.266Z,1544025414.266 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-05T15:56:54.266Z,1544025414.266 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:56:54.280Z,1544025414.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:56:54.280Z,1544025414.280 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:56:54.674Z,1544025414.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:56:54.675Z,1544025414.675 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-05T15:56:54.675Z,1544025414.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:56:54.675Z,1544025414.675 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-05T15:56:55.070Z,1544025415.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:56:55.070Z,1544025415.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:56:55.071Z,1544025415.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:56:55.071Z,1544025415.071 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:56:55.072Z,1544025415.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:56:55.072Z,1544025415.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:56:58.639Z,1544025418.639 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:57:30.635Z,1544025450.635 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T15:57:30.718Z,1544025450.718 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T15:57:30.718Z,1544025450.718 [NAL9602] Data Fault, FailCount= 1 2018-12-05T15:57:30.718Z,1544025450.718 [NAL9602](ERROR): Data Fault 2018-12-05T15:57:30.754Z,1544025450.754 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T15:57:31.035Z,1544025451.035 [NAL9602](INFO): Powering down 2018-12-05T15:57:31.874Z,1544025451.874 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T15:57:31.874Z,1544025451.874 [NAL9602] No Fault, FailCount= 1 2018-12-05T15:58:01.387Z,1544025481.387 [NAL9602](INFO): Powering up NAL9602 2018-12-05T15:58:12.588Z,1544025492.588 [NAL9602](INFO): NAL9602 initialized 2018-12-05T15:58:55.133Z,1544025535.133 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:58:55.134Z,1544025535.134 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-05T15:58:55.134Z,1544025535.134 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T15:58:55.136Z,1544025535.136 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T15:58:55.136Z,1544025535.136 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-05T15:58:55.136Z,1544025535.136 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T15:58:55.149Z,1544025535.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T15:58:55.150Z,1544025535.150 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T15:58:55.541Z,1544025535.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T15:58:55.541Z,1544025535.541 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-05T15:58:55.541Z,1544025535.541 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T15:58:55.542Z,1544025535.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-05T15:58:55.934Z,1544025535.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T15:58:55.934Z,1544025535.934 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:58:55.935Z,1544025535.935 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T15:58:55.935Z,1544025535.935 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T15:58:55.935Z,1544025535.935 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T15:58:55.936Z,1544025535.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:00:21.719Z,1544025621.719 [Reporter](INFO): platform_buoyancy_position 960.352074 cc 2018-12-05T16:00:55.999Z,1544025655.999 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:00:55.999Z,1544025655.999 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-05T16:00:55.999Z,1544025655.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:00:56.001Z,1544025656.001 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:00:56.001Z,1544025656.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-05T16:00:56.001Z,1544025656.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:00:56.014Z,1544025656.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:00:56.015Z,1544025656.015 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:00:56.415Z,1544025656.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:00:56.415Z,1544025656.415 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-05T16:00:56.415Z,1544025656.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:00:56.415Z,1544025656.415 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-05T16:00:56.790Z,1544025656.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:00:56.805Z,1544025656.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:00:56.805Z,1544025656.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:00:56.805Z,1544025656.805 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:00:56.806Z,1544025656.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:00:56.806Z,1544025656.806 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:01:48.028Z,1544025708.028 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T15:56:46.7Z 2018-12-05T16:01:48.028Z,1544025708.028 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T16:01:48.028Z,1544025708.028 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T16:01:53.173Z,1544025713.173 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0744.lzma 2018-12-05T16:01:53.956Z,1544025713.956 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0744.lzma.bak 2018-12-05T16:01:53.956Z,1544025713.956 [DataOverHttps](INFO): SBD MOMSN=8969004 2018-12-05T16:02:03.540Z,1544025723.540 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T16:02:03.598Z,1544025723.598 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20181203T211451/Express0745.lzma 2018-12-05T16:02:04.397Z,1544025724.397 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0745.lzma.bak 2018-12-05T16:02:04.397Z,1544025724.397 [DataOverHttps](INFO): SBD MOMSN=8969008 2018-12-05T16:02:05.784Z,1544025725.784 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T16:02:05.784Z,1544025725.784 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T16:02:05.784Z,1544025725.784 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T16:02:33.892Z,1544025753.892 [NAL9602](INFO): Powering down 2018-12-05T16:02:57.067Z,1544025777.067 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:02:57.067Z,1544025777.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-05T16:02:57.067Z,1544025777.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:02:57.069Z,1544025777.069 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:02:57.069Z,1544025777.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-05T16:02:57.069Z,1544025777.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:02:57.083Z,1544025777.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:02:57.083Z,1544025777.083 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:02:57.486Z,1544025777.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:02:57.486Z,1544025777.486 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-05T16:02:57.487Z,1544025777.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:02:57.487Z,1544025777.487 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-05T16:02:57.873Z,1544025777.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:02:57.874Z,1544025777.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:02:57.874Z,1544025777.874 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:02:57.874Z,1544025777.874 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:02:57.875Z,1544025777.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:02:57.875Z,1544025777.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:04:58.240Z,1544025898.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:04:58.240Z,1544025898.240 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-05T16:04:58.241Z,1544025898.241 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:04:58.255Z,1544025898.255 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:04:58.255Z,1544025898.255 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-05T16:04:58.255Z,1544025898.255 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:04:58.302Z,1544025898.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:04:58.302Z,1544025898.302 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:04:58.659Z,1544025898.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:04:58.659Z,1544025898.659 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-05T16:04:58.660Z,1544025898.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:04:58.660Z,1544025898.660 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-05T16:04:59.050Z,1544025899.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:04:59.050Z,1544025899.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:04:59.051Z,1544025899.051 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:04:59.051Z,1544025899.051 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:04:59.051Z,1544025899.051 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:04:59.052Z,1544025899.052 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:06:59.451Z,1544026019.451 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:06:59.451Z,1544026019.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-05T16:06:59.451Z,1544026019.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:06:59.453Z,1544026019.453 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:06:59.453Z,1544026019.453 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-05T16:06:59.453Z,1544026019.453 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:06:59.467Z,1544026019.467 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:06:59.468Z,1544026019.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:06:59.862Z,1544026019.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:06:59.862Z,1544026019.862 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-05T16:06:59.863Z,1544026019.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:06:59.863Z,1544026019.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-05T16:07:00.250Z,1544026020.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:07:00.250Z,1544026020.250 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:07:00.251Z,1544026020.251 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:07:00.251Z,1544026020.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:07:00.251Z,1544026020.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:07:00.252Z,1544026020.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:07:06.247Z,1544026026.247 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T16:07:06.247Z,1544026026.247 [Default:CheckIn:C.Wait] Stopped 2018-12-05T16:07:06.247Z,1544026026.247 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T16:07:06.247Z,1544026026.247 [Default:CheckIn:D] Running Loop=1 2018-12-05T16:07:06.649Z,1544026026.649 [Default:CheckIn:D] Stopped 2018-12-05T16:07:06.649Z,1544026026.649 [Default:CheckIn:E] Running Loop=1 2018-12-05T16:07:07.048Z,1544026027.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2572.243750 min 2018-12-05T16:07:07.048Z,1544026027.048 [Default:CheckIn:E] Stopped 2018-12-05T16:07:07.048Z,1544026027.048 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T16:07:07.048Z,1544026027.048 [Default:CheckIn] Stopped 2018-12-05T16:07:07.049Z,1544026027.049 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T16:07:07.049Z,1544026027.049 [Default:CheckIn](INFO): Running loop #250 2018-12-05T16:07:07.049Z,1544026027.049 [Default:CheckIn] Running Loop=250 2018-12-05T16:07:07.049Z,1544026027.049 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T16:07:07.049Z,1544026027.049 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T16:07:07.819Z,1544026027.819 [NAL9602](INFO): Powering up 2018-12-05T16:07:19.019Z,1544026039.019 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:07:19.820Z,1544026039.820 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T16:07:19.820Z,1544026039.820 [NAL9602] Data Fault, FailCount= 2 2018-12-05T16:07:19.820Z,1544026039.820 [NAL9602](ERROR): Data Fault 2018-12-05T16:07:19.882Z,1544026039.882 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T16:07:20.219Z,1544026040.219 [NAL9602](INFO): Powering down 2018-12-05T16:07:21.067Z,1544026041.067 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T16:07:21.067Z,1544026041.067 [NAL9602] No Fault, FailCount= 2 2018-12-05T16:07:27.432Z,1544026047.432 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T16:07:27.432Z,1544026047.432 [DropWeight] No Fault, FailCount= 1 2018-12-05T16:07:50.599Z,1544026070.599 [NAL9602](INFO): Powering up NAL9602 2018-12-05T16:08:01.859Z,1544026081.859 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:09:00.263Z,1544026140.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:09:00.263Z,1544026140.263 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-05T16:09:00.263Z,1544026140.263 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:09:00.265Z,1544026140.265 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:09:00.265Z,1544026140.265 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-05T16:09:00.265Z,1544026140.265 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:09:00.307Z,1544026140.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:09:00.307Z,1544026140.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:09:00.698Z,1544026140.698 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:09:00.699Z,1544026140.699 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-05T16:09:00.699Z,1544026140.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:09:00.699Z,1544026140.699 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-05T16:09:01.070Z,1544026141.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:09:01.070Z,1544026141.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:09:01.071Z,1544026141.071 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:09:01.071Z,1544026141.071 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:09:01.071Z,1544026141.071 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:09:01.072Z,1544026141.072 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:11:01.112Z,1544026261.112 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:11:01.113Z,1544026261.113 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-05T16:11:01.113Z,1544026261.113 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:11:01.115Z,1544026261.115 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:11:01.115Z,1544026261.115 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-05T16:11:01.115Z,1544026261.115 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:11:01.129Z,1544026261.129 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:11:01.130Z,1544026261.130 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:11:01.532Z,1544026261.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:11:01.532Z,1544026261.532 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-05T16:11:01.532Z,1544026261.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:11:01.532Z,1544026261.532 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-05T16:11:01.918Z,1544026261.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:11:01.919Z,1544026261.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:11:01.919Z,1544026261.919 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:11:01.920Z,1544026261.920 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:11:01.920Z,1544026261.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:11:01.920Z,1544026261.920 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:12:07.810Z,1544026327.810 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T16:07:07.0Z 2018-12-05T16:12:07.811Z,1544026327.811 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T16:12:07.811Z,1544026327.811 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T16:12:13.440Z,1544026333.440 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0747.lzma 2018-12-05T16:12:14.241Z,1544026334.241 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0747.lzma.bak 2018-12-05T16:12:14.241Z,1544026334.241 [DataOverHttps](INFO): SBD MOMSN=8969029 2018-12-05T16:12:23.688Z,1544026343.688 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0748.lzma 2018-12-05T16:12:24.491Z,1544026344.491 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0748.lzma.bak 2018-12-05T16:12:24.491Z,1544026344.491 [DataOverHttps](INFO): SBD MOMSN=8969031 2018-12-05T16:12:25.877Z,1544026345.877 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T16:12:25.877Z,1544026345.877 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T16:12:25.877Z,1544026345.877 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T16:13:04.820Z,1544026384.820 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:13:04.820Z,1544026384.820 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-05T16:13:04.820Z,1544026384.820 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:13:04.822Z,1544026384.822 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:13:04.822Z,1544026384.822 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-05T16:13:04.822Z,1544026384.822 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:13:04.872Z,1544026384.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:13:04.873Z,1544026384.873 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:13:04.983Z,1544026384.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:13:04.983Z,1544026384.983 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-05T16:13:04.983Z,1544026384.983 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:13:04.984Z,1544026384.984 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-05T16:13:05.296Z,1544026385.296 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T16:13:05.394Z,1544026385.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:13:05.395Z,1544026385.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:13:05.395Z,1544026385.395 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:13:05.396Z,1544026385.396 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:13:05.396Z,1544026385.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:13:05.396Z,1544026385.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:13:35.700Z,1544026415.700 [NAL9602](INFO): Powering down 2018-12-05T16:15:05.653Z,1544026505.653 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:15:05.654Z,1544026505.654 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-05T16:15:05.654Z,1544026505.654 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:15:05.656Z,1544026505.656 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:15:05.656Z,1544026505.656 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-05T16:15:05.656Z,1544026505.656 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:15:05.669Z,1544026505.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:15:05.669Z,1544026505.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:15:06.063Z,1544026506.063 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:15:06.063Z,1544026506.063 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-05T16:15:06.064Z,1544026506.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:15:06.064Z,1544026506.064 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-05T16:15:06.458Z,1544026506.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:15:06.458Z,1544026506.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:15:06.459Z,1544026506.459 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:15:06.459Z,1544026506.459 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:15:06.459Z,1544026506.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:15:06.460Z,1544026506.460 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:17:06.626Z,1544026626.626 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:17:06.626Z,1544026626.626 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-05T16:17:06.626Z,1544026626.626 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:17:06.628Z,1544026626.628 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:17:06.628Z,1544026626.628 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-05T16:17:06.628Z,1544026626.628 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:17:06.641Z,1544026626.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:17:06.642Z,1544026626.642 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:17:07.037Z,1544026627.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:17:07.037Z,1544026627.037 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-05T16:17:07.038Z,1544026627.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:17:07.038Z,1544026627.038 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-05T16:17:07.434Z,1544026627.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:17:07.434Z,1544026627.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:17:07.435Z,1544026627.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:17:07.435Z,1544026627.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:17:07.435Z,1544026627.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:17:07.436Z,1544026627.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:17:26.194Z,1544026646.194 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T16:17:26.194Z,1544026646.194 [Default:CheckIn:C.Wait] Stopped 2018-12-05T16:17:26.194Z,1544026646.194 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T16:17:26.194Z,1544026646.194 [Default:CheckIn:D] Running Loop=1 2018-12-05T16:17:26.587Z,1544026646.587 [Default:CheckIn:D] Stopped 2018-12-05T16:17:26.587Z,1544026646.587 [Default:CheckIn:E] Running Loop=1 2018-12-05T16:17:26.990Z,1544026646.990 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2582.576042 min 2018-12-05T16:17:26.990Z,1544026646.990 [Default:CheckIn:E] Stopped 2018-12-05T16:17:26.990Z,1544026646.990 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T16:17:26.990Z,1544026646.990 [Default:CheckIn] Stopped 2018-12-05T16:17:26.990Z,1544026646.990 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T16:17:26.991Z,1544026646.991 [Default:CheckIn](INFO): Running loop #251 2018-12-05T16:17:26.991Z,1544026646.991 [Default:CheckIn] Running Loop=251 2018-12-05T16:17:26.991Z,1544026646.991 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T16:17:26.991Z,1544026646.991 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T16:17:27.757Z,1544026647.757 [NAL9602](INFO): Powering up 2018-12-05T16:17:38.560Z,1544026658.560 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:18:10.524Z,1544026690.524 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T16:18:10.606Z,1544026690.606 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T16:18:10.606Z,1544026690.606 [NAL9602] Data Fault, FailCount= 3 2018-12-05T16:18:10.607Z,1544026690.606 [NAL9602](ERROR): Data Fault 2018-12-05T16:18:10.645Z,1544026690.645 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T16:18:10.924Z,1544026690.924 [NAL9602](INFO): Powering down 2018-12-05T16:18:11.802Z,1544026691.802 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T16:18:11.802Z,1544026691.802 [NAL9602] No Fault, FailCount= 3 2018-12-05T16:18:41.304Z,1544026721.304 [NAL9602](INFO): Powering up NAL9602 2018-12-05T16:18:52.504Z,1544026732.504 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:18:53.308Z,1544026733.308 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T16:18:53.308Z,1544026733.308 [NAL9602] Data Fault, FailCount= 4 2018-12-05T16:18:53.308Z,1544026733.308 [NAL9602](ERROR): Data Fault 2018-12-05T16:18:53.382Z,1544026733.382 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T16:18:53.704Z,1544026733.704 [NAL9602](INFO): Powering down 2018-12-05T16:18:56.961Z,1544026736.961 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T16:18:56.961Z,1544026736.961 [NAL9602] No Fault, FailCount= 4 2018-12-05T16:19:07.706Z,1544026747.706 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:19:07.706Z,1544026747.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-05T16:19:07.707Z,1544026747.707 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:19:07.709Z,1544026747.709 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:19:07.709Z,1544026747.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-05T16:19:07.709Z,1544026747.709 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:19:07.756Z,1544026747.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:19:07.756Z,1544026747.756 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:19:08.145Z,1544026748.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:19:08.145Z,1544026748.145 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-05T16:19:08.146Z,1544026748.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:19:08.146Z,1544026748.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-05T16:19:08.500Z,1544026748.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:19:08.501Z,1544026748.501 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:19:08.501Z,1544026748.501 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:19:08.501Z,1544026748.501 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:19:08.502Z,1544026748.502 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:19:08.502Z,1544026748.502 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:19:24.080Z,1544026764.080 [NAL9602](INFO): Powering up NAL9602 2018-12-05T16:19:35.032Z,1544026775.032 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:21:08.738Z,1544026868.738 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:21:08.738Z,1544026868.738 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-05T16:21:08.738Z,1544026868.738 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:21:08.740Z,1544026868.740 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:21:08.741Z,1544026868.741 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-05T16:21:08.741Z,1544026868.741 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:21:08.754Z,1544026868.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:21:08.755Z,1544026868.755 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:21:09.158Z,1544026869.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:21:09.158Z,1544026869.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-05T16:21:09.159Z,1544026869.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:21:09.159Z,1544026869.159 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-05T16:21:09.541Z,1544026869.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:21:09.541Z,1544026869.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:21:09.541Z,1544026869.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:21:09.542Z,1544026869.542 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:21:09.542Z,1544026869.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:21:09.543Z,1544026869.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:22:28.330Z,1544026948.330 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T16:17:26.0Z 2018-12-05T16:22:28.330Z,1544026948.330 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T16:22:28.353Z,1544026948.353 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T16:22:33.358Z,1544026953.358 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0750.lzma 2018-12-05T16:22:34.141Z,1544026954.141 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0750.lzma.bak 2018-12-05T16:22:34.141Z,1544026954.141 [DataOverHttps](INFO): SBD MOMSN=8969053 2018-12-05T16:22:43.623Z,1544026963.623 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T16:22:43.697Z,1544026963.697 [DataOverHttps](INFO): Sending 346 bytes from file Logs/20181203T211451/Express0751.lzma 2018-12-05T16:22:44.469Z,1544026964.469 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0751.lzma.bak 2018-12-05T16:22:44.470Z,1544026964.470 [DataOverHttps](INFO): SBD MOMSN=8969055 2018-12-05T16:22:45.852Z,1544026965.852 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T16:22:45.852Z,1544026965.852 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T16:22:45.852Z,1544026965.852 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T16:23:09.576Z,1544026989.576 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:23:09.576Z,1544026989.576 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-05T16:23:09.576Z,1544026989.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:23:09.578Z,1544026989.578 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:23:09.578Z,1544026989.578 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-05T16:23:09.578Z,1544026989.578 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:23:09.604Z,1544026989.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:23:09.604Z,1544026989.604 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:23:10.011Z,1544026990.011 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:23:10.011Z,1544026990.011 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-05T16:23:10.012Z,1544026990.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:23:10.012Z,1544026990.012 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-05T16:23:10.382Z,1544026990.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:23:10.382Z,1544026990.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:23:10.383Z,1544026990.383 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:23:10.383Z,1544026990.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:23:10.383Z,1544026990.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:23:10.384Z,1544026990.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:23:13.963Z,1544026993.963 [NAL9602](INFO): Powering down 2018-12-05T16:25:10.696Z,1544027110.696 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:25:10.696Z,1544027110.696 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-05T16:25:10.696Z,1544027110.696 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:25:10.698Z,1544027110.698 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:25:10.698Z,1544027110.698 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-05T16:25:10.698Z,1544027110.698 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:25:10.712Z,1544027110.712 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:25:10.712Z,1544027110.712 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:25:11.111Z,1544027111.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:25:11.111Z,1544027111.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-05T16:25:11.112Z,1544027111.112 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:25:11.112Z,1544027111.112 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-05T16:25:11.498Z,1544027111.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:25:11.499Z,1544027111.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:25:11.499Z,1544027111.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:25:11.499Z,1544027111.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:25:11.500Z,1544027111.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:25:11.500Z,1544027111.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:27:11.878Z,1544027231.878 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:27:11.878Z,1544027231.878 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-05T16:27:11.878Z,1544027231.878 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:27:11.881Z,1544027231.881 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:27:11.881Z,1544027231.881 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-05T16:27:11.881Z,1544027231.881 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:27:11.894Z,1544027231.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:27:11.894Z,1544027231.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:27:12.286Z,1544027232.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:27:12.287Z,1544027232.287 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-05T16:27:12.287Z,1544027232.287 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:27:12.287Z,1544027232.287 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-05T16:27:12.673Z,1544027232.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:27:12.674Z,1544027232.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:27:12.674Z,1544027232.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:27:12.674Z,1544027232.674 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:27:12.675Z,1544027232.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:27:12.675Z,1544027232.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:27:46.224Z,1544027266.224 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T16:27:46.224Z,1544027266.224 [Default:CheckIn:C.Wait] Stopped 2018-12-05T16:27:46.224Z,1544027266.224 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T16:27:46.224Z,1544027266.224 [Default:CheckIn:D] Running Loop=1 2018-12-05T16:27:46.627Z,1544027266.627 [Default:CheckIn:D] Stopped 2018-12-05T16:27:46.627Z,1544027266.627 [Default:CheckIn:E] Running Loop=1 2018-12-05T16:27:47.049Z,1544027267.049 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2592.910156 min 2018-12-05T16:27:47.049Z,1544027267.049 [Default:CheckIn:E] Stopped 2018-12-05T16:27:47.049Z,1544027267.049 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T16:27:47.049Z,1544027267.049 [Default:CheckIn] Stopped 2018-12-05T16:27:47.050Z,1544027267.050 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T16:27:47.050Z,1544027267.050 [Default:CheckIn](INFO): Running loop #252 2018-12-05T16:27:47.050Z,1544027267.050 [Default:CheckIn] Running Loop=252 2018-12-05T16:27:47.050Z,1544027267.050 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T16:27:47.050Z,1544027267.050 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T16:27:47.803Z,1544027267.803 [NAL9602](INFO): Powering up 2018-12-05T16:27:59.004Z,1544027279.004 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:29:12.854Z,1544027352.854 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:29:12.854Z,1544027352.854 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-05T16:29:12.855Z,1544027352.855 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:29:12.857Z,1544027352.857 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:29:12.857Z,1544027352.857 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-05T16:29:12.857Z,1544027352.857 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:29:12.871Z,1544027352.871 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:29:12.871Z,1544027352.871 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:29:13.270Z,1544027353.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:29:13.270Z,1544027353.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-05T16:29:13.270Z,1544027353.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:29:13.270Z,1544027353.270 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-05T16:29:13.654Z,1544027353.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:29:13.654Z,1544027353.654 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:29:13.655Z,1544027353.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:29:13.655Z,1544027353.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:29:13.655Z,1544027353.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:29:13.656Z,1544027353.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:31:13.705Z,1544027473.705 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:31:13.705Z,1544027473.705 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-05T16:31:13.705Z,1544027473.705 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:31:13.707Z,1544027473.707 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:31:13.707Z,1544027473.707 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-05T16:31:13.708Z,1544027473.708 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:31:13.721Z,1544027473.721 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:31:13.721Z,1544027473.721 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:31:14.123Z,1544027474.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:31:14.124Z,1544027474.124 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-05T16:31:14.124Z,1544027474.124 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:31:14.124Z,1544027474.124 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-05T16:31:14.498Z,1544027474.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:31:14.513Z,1544027474.513 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:31:14.513Z,1544027474.513 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:31:14.513Z,1544027474.513 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:31:14.514Z,1544027474.514 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:31:14.514Z,1544027474.514 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:32:48.091Z,1544027568.091 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T16:27:47.0Z 2018-12-05T16:32:48.091Z,1544027568.091 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T16:32:48.091Z,1544027568.091 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T16:32:53.036Z,1544027573.036 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0753.lzma 2018-12-05T16:32:53.819Z,1544027573.819 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0753.lzma.bak 2018-12-05T16:32:53.819Z,1544027573.819 [DataOverHttps](INFO): SBD MOMSN=8969080 2018-12-05T16:33:03.170Z,1544027583.170 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T16:33:03.253Z,1544027583.253 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0754.lzma 2018-12-05T16:33:04.036Z,1544027584.036 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0754.lzma.bak 2018-12-05T16:33:04.036Z,1544027584.036 [DataOverHttps](INFO): SBD MOMSN=8969082 2018-12-05T16:33:05.446Z,1544027585.446 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T16:33:05.446Z,1544027585.446 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T16:33:05.446Z,1544027585.446 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T16:33:14.650Z,1544027594.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:33:14.650Z,1544027594.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-05T16:33:14.650Z,1544027594.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:33:14.652Z,1544027594.652 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:33:14.652Z,1544027594.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-05T16:33:14.652Z,1544027594.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:33:14.665Z,1544027594.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:33:14.666Z,1544027594.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:33:15.070Z,1544027595.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:33:15.070Z,1544027595.070 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-05T16:33:15.070Z,1544027595.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:33:15.070Z,1544027595.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-05T16:33:15.453Z,1544027595.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:33:15.453Z,1544027595.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:33:15.454Z,1544027595.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:33:15.454Z,1544027595.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:33:15.455Z,1544027595.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:33:15.455Z,1544027595.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:33:33.427Z,1544027613.427 [NAL9602](INFO): Powering down 2018-12-05T16:35:15.622Z,1544027715.622 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:35:15.622Z,1544027715.622 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-05T16:35:15.623Z,1544027715.623 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:35:15.625Z,1544027715.625 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:35:15.625Z,1544027715.625 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-05T16:35:15.625Z,1544027715.625 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:35:15.638Z,1544027715.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:35:15.638Z,1544027715.638 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:35:16.034Z,1544027716.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:35:16.034Z,1544027716.034 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-05T16:35:16.035Z,1544027716.035 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:35:16.035Z,1544027716.035 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-05T16:35:16.415Z,1544027716.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:35:16.416Z,1544027716.416 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:35:16.416Z,1544027716.416 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:35:16.417Z,1544027716.417 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:35:16.417Z,1544027716.417 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:35:16.417Z,1544027716.417 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:37:16.457Z,1544027836.457 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:37:16.457Z,1544027836.457 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-05T16:37:16.457Z,1544027836.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:37:16.459Z,1544027836.459 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:37:16.459Z,1544027836.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-05T16:37:16.459Z,1544027836.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:37:16.472Z,1544027836.472 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:37:16.473Z,1544027836.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:37:16.878Z,1544027836.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:37:16.878Z,1544027836.878 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-05T16:37:16.878Z,1544027836.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:37:16.878Z,1544027836.878 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-05T16:37:17.257Z,1544027837.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:37:17.257Z,1544027837.257 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:37:17.258Z,1544027837.258 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:37:17.258Z,1544027837.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:37:17.259Z,1544027837.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:37:17.259Z,1544027837.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:37:28.839Z,1544027848.839 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T16:37:28.839Z,1544027848.839 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T16:37:28.839Z,1544027848.839 [DropWeight](ERROR): Hardware Fault 2018-12-05T16:37:28.879Z,1544027848.879 [CBIT](INFO): Critical error at 20181205T163728 2018-12-05T16:37:28.881Z,1544027848.881 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T16:37:28.882Z,1544027848.882 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T16:37:29.279Z,1544027849.279 [CBIT](INFO): Critical error at 20181205T163728 2018-12-05T16:38:05.708Z,1544027885.708 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T16:38:05.708Z,1544027885.708 [Default:CheckIn:C.Wait] Stopped 2018-12-05T16:38:05.708Z,1544027885.708 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T16:38:05.708Z,1544027885.708 [Default:CheckIn:D] Running Loop=1 2018-12-05T16:38:06.114Z,1544027886.114 [Default:CheckIn:D] Stopped 2018-12-05T16:38:06.114Z,1544027886.114 [Default:CheckIn:E] Running Loop=1 2018-12-05T16:38:06.514Z,1544027886.514 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2603.234896 min 2018-12-05T16:38:06.515Z,1544027886.515 [Default:CheckIn:E] Stopped 2018-12-05T16:38:06.515Z,1544027886.515 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T16:38:06.515Z,1544027886.515 [Default:CheckIn] Stopped 2018-12-05T16:38:06.515Z,1544027886.515 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T16:38:06.515Z,1544027886.515 [Default:CheckIn](INFO): Running loop #253 2018-12-05T16:38:06.515Z,1544027886.515 [Default:CheckIn] Running Loop=253 2018-12-05T16:38:06.515Z,1544027886.515 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T16:38:06.516Z,1544027886.516 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T16:38:07.287Z,1544027887.287 [NAL9602](INFO): Powering up 2018-12-05T16:38:18.092Z,1544027898.092 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:38:18.892Z,1544027898.892 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T16:38:18.892Z,1544027898.892 [NAL9602] Data Fault, FailCount= 5 2018-12-05T16:38:18.892Z,1544027898.892 [NAL9602](ERROR): Data Fault 2018-12-05T16:38:18.933Z,1544027898.933 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T16:38:18.933Z,1544027898.933 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T16:38:19.287Z,1544027899.287 [NAL9602](INFO): Powering down 2018-12-05T16:38:19.344Z,1544027899.344 [CBIT](INFO): Critical error at 20181205T163818 2018-12-05T16:39:17.653Z,1544027957.653 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:39:17.654Z,1544027957.654 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-05T16:39:17.654Z,1544027957.654 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:39:17.656Z,1544027957.656 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:39:17.656Z,1544027957.656 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-05T16:39:17.656Z,1544027957.656 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:39:17.670Z,1544027957.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:39:17.670Z,1544027957.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:39:18.079Z,1544027958.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:39:18.079Z,1544027958.079 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-05T16:39:18.080Z,1544027958.080 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:39:18.080Z,1544027958.080 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-05T16:39:18.454Z,1544027958.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:39:18.454Z,1544027958.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:39:18.454Z,1544027958.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:39:18.455Z,1544027958.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:39:18.455Z,1544027958.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:39:18.456Z,1544027958.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:40:18.981Z,1544028018.981 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T16:40:18.981Z,1544028018.981 [NAL9602] No Fault, FailCount= 5 2018-12-05T16:40:19.331Z,1544028019.331 [NAL9602](INFO): Powering up NAL9602 2018-12-05T16:40:30.531Z,1544028030.531 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:41:18.646Z,1544028078.646 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:41:18.646Z,1544028078.646 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-05T16:41:18.646Z,1544028078.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:41:18.648Z,1544028078.648 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:41:18.649Z,1544028078.649 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-05T16:41:18.649Z,1544028078.649 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:41:18.662Z,1544028078.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:41:18.662Z,1544028078.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:41:19.059Z,1544028079.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:41:19.059Z,1544028079.059 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-05T16:41:19.060Z,1544028079.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:41:19.060Z,1544028079.060 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-05T16:41:22.162Z,1544028082.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:41:22.163Z,1544028082.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:41:22.163Z,1544028082.163 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:41:22.163Z,1544028082.163 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:41:22.164Z,1544028082.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:41:22.164Z,1544028082.164 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:43:07.870Z,1544028187.870 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T16:38:06.5Z 2018-12-05T16:43:07.871Z,1544028187.871 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T16:43:07.871Z,1544028187.871 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T16:43:12.930Z,1544028192.930 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181203T211451/Courier0756.lzma 2018-12-05T16:43:13.729Z,1544028193.729 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0756.lzma.bak 2018-12-05T16:43:13.729Z,1544028193.729 [DataOverHttps](INFO): SBD MOMSN=8969219 2018-12-05T16:43:23.059Z,1544028203.059 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:43:23.059Z,1544028203.059 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-05T16:43:23.059Z,1544028203.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:43:23.061Z,1544028203.061 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:43:23.061Z,1544028203.061 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-05T16:43:23.061Z,1544028203.061 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:43:23.075Z,1544028203.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:43:23.075Z,1544028203.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:43:23.088Z,1544028203.088 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0757.lzma 2018-12-05T16:43:23.199Z,1544028203.199 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:43:23.199Z,1544028203.199 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-05T16:43:23.200Z,1544028203.200 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:43:23.200Z,1544028203.200 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-05T16:43:23.522Z,1544028203.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:43:23.523Z,1544028203.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:43:23.523Z,1544028203.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:43:23.523Z,1544028203.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:43:23.524Z,1544028203.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:43:23.524Z,1544028203.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:43:23.885Z,1544028203.885 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0757.lzma.bak 2018-12-05T16:43:23.885Z,1544028203.885 [DataOverHttps](INFO): SBD MOMSN=8969224 2018-12-05T16:43:25.342Z,1544028205.342 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T16:43:25.342Z,1544028205.342 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T16:43:25.342Z,1544028205.342 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T16:45:23.743Z,1544028323.743 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:45:23.744Z,1544028323.744 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-05T16:45:23.744Z,1544028323.744 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:45:23.746Z,1544028323.746 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:45:23.746Z,1544028323.746 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-05T16:45:23.746Z,1544028323.746 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:45:23.760Z,1544028323.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:45:23.760Z,1544028323.760 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:45:24.162Z,1544028324.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:45:24.162Z,1544028324.162 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-05T16:45:24.163Z,1544028324.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:45:24.163Z,1544028324.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-05T16:45:24.546Z,1544028324.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:45:24.547Z,1544028324.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:45:24.547Z,1544028324.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:45:24.547Z,1544028324.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:45:24.548Z,1544028324.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:45:24.548Z,1544028324.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:45:34.119Z,1544028334.119 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T16:46:04.635Z,1544028364.635 [NAL9602](INFO): Powering down 2018-12-05T16:47:24.722Z,1544028444.722 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:47:24.722Z,1544028444.722 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-05T16:47:24.722Z,1544028444.722 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:47:24.724Z,1544028444.724 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:47:24.725Z,1544028444.725 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-05T16:47:24.725Z,1544028444.725 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:47:24.738Z,1544028444.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:47:24.738Z,1544028444.738 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:47:25.134Z,1544028445.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:47:25.134Z,1544028445.134 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-05T16:47:25.134Z,1544028445.134 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:47:25.135Z,1544028445.135 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-05T16:47:25.522Z,1544028445.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:47:25.523Z,1544028445.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:47:25.523Z,1544028445.523 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:47:25.523Z,1544028445.523 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:47:25.524Z,1544028445.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:47:25.524Z,1544028445.524 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:48:25.828Z,1544028505.828 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T16:48:25.828Z,1544028505.828 [Default:CheckIn:C.Wait] Stopped 2018-12-05T16:48:25.829Z,1544028505.829 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T16:48:25.829Z,1544028505.829 [Default:CheckIn:D] Running Loop=1 2018-12-05T16:48:26.234Z,1544028506.234 [Default:CheckIn:D] Stopped 2018-12-05T16:48:26.234Z,1544028506.234 [Default:CheckIn:E] Running Loop=1 2018-12-05T16:48:26.629Z,1544028506.629 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2613.570312 min 2018-12-05T16:48:26.629Z,1544028506.629 [Default:CheckIn:E] Stopped 2018-12-05T16:48:26.629Z,1544028506.629 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T16:48:26.629Z,1544028506.629 [Default:CheckIn] Stopped 2018-12-05T16:48:26.629Z,1544028506.629 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T16:48:26.630Z,1544028506.630 [Default:CheckIn](INFO): Running loop #254 2018-12-05T16:48:26.630Z,1544028506.630 [Default:CheckIn] Running Loop=254 2018-12-05T16:48:26.630Z,1544028506.630 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T16:48:26.630Z,1544028506.630 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T16:48:27.403Z,1544028507.403 [NAL9602](INFO): Powering up 2018-12-05T16:48:38.604Z,1544028518.604 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:49:10.315Z,1544028550.315 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T16:49:10.394Z,1544028550.394 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T16:49:10.394Z,1544028550.394 [NAL9602] Data Fault, FailCount= 1 2018-12-05T16:49:10.394Z,1544028550.394 [NAL9602](ERROR): Data Fault 2018-12-05T16:49:10.432Z,1544028550.432 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T16:49:10.715Z,1544028550.715 [NAL9602](INFO): Powering down 2018-12-05T16:49:11.559Z,1544028551.559 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T16:49:11.559Z,1544028551.559 [NAL9602] No Fault, FailCount= 1 2018-12-05T16:49:25.560Z,1544028565.560 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:49:25.560Z,1544028565.560 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-05T16:49:25.560Z,1544028565.560 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:49:25.562Z,1544028565.562 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:49:25.562Z,1544028565.562 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-05T16:49:25.562Z,1544028565.562 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:49:25.576Z,1544028565.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:49:25.576Z,1544028565.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:49:25.974Z,1544028565.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:49:25.974Z,1544028565.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-05T16:49:25.975Z,1544028565.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:49:25.975Z,1544028565.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-05T16:49:26.354Z,1544028566.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:49:26.355Z,1544028566.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:49:26.355Z,1544028566.355 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:49:26.355Z,1544028566.355 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:49:26.356Z,1544028566.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:49:26.356Z,1544028566.356 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:49:40.731Z,1544028580.731 [NAL9602](INFO): Powering up NAL9602 2018-12-05T16:49:51.931Z,1544028591.931 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:51:26.360Z,1544028686.360 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:51:26.360Z,1544028686.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-05T16:51:26.360Z,1544028686.360 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:51:26.375Z,1544028686.375 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:51:26.737Z,1544028686.737 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:51:26.737Z,1544028686.737 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-05T16:51:26.737Z,1544028686.737 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:51:26.763Z,1544028686.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:51:26.763Z,1544028686.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:51:26.763Z,1544028686.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-05T16:51:27.143Z,1544028687.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:51:27.143Z,1544028687.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:51:27.143Z,1544028687.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:51:27.169Z,1544028687.169 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:51:27.169Z,1544028687.169 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-05T16:51:27.547Z,1544028687.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:51:27.547Z,1544028687.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:51:27.548Z,1544028687.548 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:52:28.924Z,1544028748.924 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T16:52:28.925Z,1544028748.925 [DropWeight] No Fault, FailCount= 1 2018-12-05T16:53:27.655Z,1544028807.655 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:53:27.655Z,1544028807.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-05T16:53:27.655Z,1544028807.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:53:27.657Z,1544028807.657 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:53:27.657Z,1544028807.657 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-05T16:53:27.657Z,1544028807.657 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:53:27.660Z,1544028807.660 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T16:48:26.6Z 2018-12-05T16:53:27.660Z,1544028807.660 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T16:53:27.660Z,1544028807.660 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T16:53:27.716Z,1544028807.716 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:53:27.716Z,1544028807.716 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:53:27.795Z,1544028807.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:53:27.795Z,1544028807.795 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-05T16:53:27.796Z,1544028807.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:53:27.796Z,1544028807.796 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-05T16:53:28.657Z,1544028808.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:53:28.658Z,1544028808.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:53:28.658Z,1544028808.658 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:53:28.658Z,1544028808.658 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:53:28.659Z,1544028808.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:53:28.659Z,1544028808.659 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:53:32.679Z,1544028812.679 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0759.lzma 2018-12-05T16:53:33.553Z,1544028813.553 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0759.lzma.bak 2018-12-05T16:53:33.553Z,1544028813.553 [DataOverHttps](INFO): SBD MOMSN=8969246 2018-12-05T16:53:42.987Z,1544028822.987 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T16:53:43.056Z,1544028823.056 [DataOverHttps](INFO): Sending 332 bytes from file Logs/20181203T211451/Express0760.lzma 2018-12-05T16:53:43.833Z,1544028823.833 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0760.lzma.bak 2018-12-05T16:53:43.834Z,1544028823.834 [DataOverHttps](INFO): SBD MOMSN=8969248 2018-12-05T16:53:45.181Z,1544028825.181 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T16:53:45.181Z,1544028825.181 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T16:53:45.181Z,1544028825.181 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T16:54:13.179Z,1544028853.179 [NAL9602](INFO): Powering down 2018-12-05T16:55:29.042Z,1544028929.042 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:55:29.042Z,1544028929.042 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-05T16:55:29.042Z,1544028929.042 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:55:29.044Z,1544028929.044 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:55:29.044Z,1544028929.044 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-05T16:55:29.045Z,1544028929.045 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:55:29.058Z,1544028929.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:55:29.058Z,1544028929.058 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:55:29.457Z,1544028929.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:55:29.457Z,1544028929.457 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-05T16:55:29.458Z,1544028929.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:55:29.458Z,1544028929.458 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-05T16:55:29.840Z,1544028929.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:55:29.841Z,1544028929.841 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:55:29.841Z,1544028929.841 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:55:29.841Z,1544028929.841 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:55:29.842Z,1544028929.842 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:55:29.842Z,1544028929.842 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:57:30.209Z,1544029050.209 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:57:30.209Z,1544029050.209 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-05T16:57:30.209Z,1544029050.209 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:57:30.212Z,1544029050.212 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:57:30.212Z,1544029050.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-05T16:57:30.212Z,1544029050.212 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:57:30.226Z,1544029050.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:57:30.226Z,1544029050.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:57:30.623Z,1544029050.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:57:30.623Z,1544029050.623 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-05T16:57:30.624Z,1544029050.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:57:30.624Z,1544029050.624 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-05T16:57:31.014Z,1544029051.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:57:31.014Z,1544029051.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:57:31.015Z,1544029051.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:57:31.015Z,1544029051.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:57:31.016Z,1544029051.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:57:31.016Z,1544029051.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:58:45.286Z,1544029125.286 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T16:58:45.286Z,1544029125.286 [Default:CheckIn:C.Wait] Stopped 2018-12-05T16:58:45.286Z,1544029125.286 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T16:58:45.286Z,1544029125.286 [Default:CheckIn:D] Running Loop=1 2018-12-05T16:58:45.690Z,1544029125.690 [Default:CheckIn:D] Stopped 2018-12-05T16:58:45.690Z,1544029125.690 [Default:CheckIn:E] Running Loop=1 2018-12-05T16:58:46.093Z,1544029126.093 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2623.894531 min 2018-12-05T16:58:46.093Z,1544029126.093 [Default:CheckIn:E] Stopped 2018-12-05T16:58:46.094Z,1544029126.094 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T16:58:46.094Z,1544029126.094 [Default:CheckIn] Stopped 2018-12-05T16:58:46.094Z,1544029126.094 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T16:58:46.094Z,1544029126.094 [Default:CheckIn](INFO): Running loop #255 2018-12-05T16:58:46.094Z,1544029126.094 [Default:CheckIn] Running Loop=255 2018-12-05T16:58:46.094Z,1544029126.094 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T16:58:46.094Z,1544029126.094 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T16:58:46.856Z,1544029126.856 [NAL9602](INFO): Powering up 2018-12-05T16:58:57.654Z,1544029137.654 [NAL9602](INFO): NAL9602 initialized 2018-12-05T16:58:58.456Z,1544029138.456 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T16:58:58.456Z,1544029138.456 [NAL9602] Data Fault, FailCount= 2 2018-12-05T16:58:58.456Z,1544029138.456 [NAL9602](ERROR): Data Fault 2018-12-05T16:58:58.527Z,1544029138.527 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T16:58:58.856Z,1544029138.856 [NAL9602](INFO): Powering down 2018-12-05T16:58:59.716Z,1544029139.716 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T16:58:59.716Z,1544029139.716 [NAL9602] No Fault, FailCount= 2 2018-12-05T16:59:29.228Z,1544029169.228 [NAL9602](INFO): Powering up NAL9602 2018-12-05T16:59:31.259Z,1544029171.259 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:59:31.259Z,1544029171.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-05T16:59:31.259Z,1544029171.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T16:59:31.261Z,1544029171.261 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T16:59:31.261Z,1544029171.261 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-05T16:59:31.261Z,1544029171.261 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T16:59:31.274Z,1544029171.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T16:59:31.275Z,1544029171.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T16:59:31.671Z,1544029171.671 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T16:59:31.671Z,1544029171.671 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-05T16:59:31.672Z,1544029171.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T16:59:31.672Z,1544029171.672 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-05T16:59:32.061Z,1544029172.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T16:59:32.062Z,1544029172.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:59:32.062Z,1544029172.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:59:32.063Z,1544029172.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T16:59:32.063Z,1544029172.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T16:59:32.064Z,1544029172.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T16:59:41.607Z,1544029181.607 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:01:32.334Z,1544029292.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:01:32.334Z,1544029292.334 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-05T17:01:32.334Z,1544029292.334 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:01:32.336Z,1544029292.336 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:01:32.336Z,1544029292.336 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-05T17:01:32.336Z,1544029292.336 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:01:32.350Z,1544029292.350 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:01:32.350Z,1544029292.350 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:01:32.759Z,1544029292.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:01:32.759Z,1544029292.759 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-05T17:01:32.759Z,1544029292.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:01:32.759Z,1544029292.759 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-05T17:01:33.142Z,1544029293.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:01:33.142Z,1544029293.142 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:01:33.143Z,1544029293.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:01:33.143Z,1544029293.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:01:33.143Z,1544029293.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:01:33.144Z,1544029293.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:03:29.193Z,1544029409.193 [BPC1](INFO): Calculating totals. Valid battery stick count: 55. Valid reserve battery stick count: 6. 2018-12-05T17:03:33.199Z,1544029413.199 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:03:33.199Z,1544029413.199 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-05T17:03:33.199Z,1544029413.199 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:03:33.201Z,1544029413.201 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:03:33.201Z,1544029413.201 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-05T17:03:33.202Z,1544029413.202 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:03:33.215Z,1544029413.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:03:33.215Z,1544029413.215 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:03:33.621Z,1544029413.621 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:03:33.621Z,1544029413.621 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-05T17:03:33.622Z,1544029413.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:03:33.622Z,1544029413.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-05T17:03:33.981Z,1544029413.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:03:33.981Z,1544029413.981 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:03:33.982Z,1544029413.982 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:03:33.982Z,1544029413.982 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:03:33.982Z,1544029413.982 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:03:33.983Z,1544029413.983 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:03:48.045Z,1544029428.045 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T16:58:46.1Z 2018-12-05T17:03:48.045Z,1544029428.045 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T17:03:48.045Z,1544029428.045 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T17:03:53.118Z,1544029433.118 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0762.lzma 2018-12-05T17:03:53.893Z,1544029433.893 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0762.lzma.bak 2018-12-05T17:03:53.893Z,1544029433.893 [DataOverHttps](INFO): SBD MOMSN=8969274 2018-12-05T17:04:03.391Z,1544029443.391 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0763.lzma 2018-12-05T17:04:04.145Z,1544029444.145 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0763.lzma.bak 2018-12-05T17:04:04.145Z,1544029444.145 [DataOverHttps](INFO): SBD MOMSN=8969276 2018-12-05T17:04:05.538Z,1544029445.538 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T17:04:05.538Z,1544029445.538 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T17:04:05.538Z,1544029445.538 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T17:04:44.476Z,1544029484.476 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T17:05:15.228Z,1544029515.228 [NAL9602](INFO): Powering down 2018-12-05T17:05:34.022Z,1544029534.022 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:05:34.022Z,1544029534.022 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-05T17:05:34.022Z,1544029534.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:05:34.024Z,1544029534.024 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:05:34.025Z,1544029534.025 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-05T17:05:34.025Z,1544029534.025 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:05:34.038Z,1544029534.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:05:34.038Z,1544029534.038 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:05:34.439Z,1544029534.439 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:05:34.439Z,1544029534.439 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-05T17:05:34.440Z,1544029534.440 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:05:34.440Z,1544029534.440 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-05T17:05:34.830Z,1544029534.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:05:34.830Z,1544029534.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:05:34.831Z,1544029534.831 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:05:34.831Z,1544029534.831 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:05:34.831Z,1544029534.831 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:05:34.832Z,1544029534.832 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:07:34.914Z,1544029654.914 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:07:34.914Z,1544029654.914 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-05T17:07:34.914Z,1544029654.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:07:34.916Z,1544029654.916 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:07:34.916Z,1544029654.916 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-05T17:07:34.917Z,1544029654.917 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:07:34.931Z,1544029654.931 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:07:34.931Z,1544029654.931 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:07:35.330Z,1544029655.330 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:07:35.330Z,1544029655.330 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-05T17:07:35.331Z,1544029655.331 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:07:35.331Z,1544029655.331 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-05T17:07:35.708Z,1544029655.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:07:35.709Z,1544029655.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:07:35.709Z,1544029655.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:07:35.709Z,1544029655.709 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:07:35.710Z,1544029655.710 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:07:35.711Z,1544029655.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:09:05.662Z,1544029745.662 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T17:09:05.662Z,1544029745.662 [Default:CheckIn:C.Wait] Stopped 2018-12-05T17:09:05.662Z,1544029745.662 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T17:09:05.662Z,1544029745.662 [Default:CheckIn:D] Running Loop=1 2018-12-05T17:09:06.062Z,1544029746.062 [Default:CheckIn:D] Stopped 2018-12-05T17:09:06.062Z,1544029746.062 [Default:CheckIn:E] Running Loop=1 2018-12-05T17:09:06.460Z,1544029746.460 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2634.234115 min 2018-12-05T17:09:06.460Z,1544029746.460 [Default:CheckIn:E] Stopped 2018-12-05T17:09:06.460Z,1544029746.460 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T17:09:06.460Z,1544029746.460 [Default:CheckIn] Stopped 2018-12-05T17:09:06.460Z,1544029746.460 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T17:09:06.461Z,1544029746.461 [Default:CheckIn](INFO): Running loop #256 2018-12-05T17:09:06.461Z,1544029746.461 [Default:CheckIn] Running Loop=256 2018-12-05T17:09:06.461Z,1544029746.461 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T17:09:06.461Z,1544029746.461 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T17:09:07.231Z,1544029747.231 [NAL9602](INFO): Powering up 2018-12-05T17:09:18.432Z,1544029758.432 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:09:36.017Z,1544029776.017 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:09:36.017Z,1544029776.017 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-05T17:09:36.017Z,1544029776.017 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:09:36.019Z,1544029776.019 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:09:36.019Z,1544029776.019 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-05T17:09:36.019Z,1544029776.019 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:09:36.033Z,1544029776.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:09:36.034Z,1544029776.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:09:36.431Z,1544029776.431 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:09:36.432Z,1544029776.432 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-05T17:09:36.432Z,1544029776.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:09:36.432Z,1544029776.432 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-05T17:09:36.829Z,1544029776.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:09:36.829Z,1544029776.829 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:09:36.830Z,1544029776.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:09:36.830Z,1544029776.830 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:09:36.831Z,1544029776.831 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:09:36.831Z,1544029776.831 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:11:36.983Z,1544029896.983 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:11:36.983Z,1544029896.983 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-05T17:11:36.983Z,1544029896.983 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:11:36.985Z,1544029896.985 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:11:36.985Z,1544029896.985 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-05T17:11:36.985Z,1544029896.985 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:11:37.027Z,1544029897.027 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:11:37.027Z,1544029897.027 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:11:37.426Z,1544029897.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:11:37.426Z,1544029897.426 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-05T17:11:37.426Z,1544029897.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:11:37.427Z,1544029897.427 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-05T17:11:37.780Z,1544029897.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:11:37.780Z,1544029897.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:11:37.781Z,1544029897.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:11:37.781Z,1544029897.781 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:11:37.782Z,1544029897.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:11:37.782Z,1544029897.782 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:13:37.870Z,1544030017.870 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:13:37.870Z,1544030017.870 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-05T17:13:37.870Z,1544030017.870 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:13:37.872Z,1544030017.872 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:13:37.872Z,1544030017.872 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-05T17:13:37.873Z,1544030017.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:13:37.886Z,1544030017.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:13:37.886Z,1544030017.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:13:38.291Z,1544030018.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:13:38.292Z,1544030018.292 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-05T17:13:38.292Z,1544030018.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:13:38.292Z,1544030018.292 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-05T17:13:38.674Z,1544030018.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:13:38.675Z,1544030018.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:13:38.675Z,1544030018.675 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:13:38.675Z,1544030018.675 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:13:38.676Z,1544030018.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:13:38.676Z,1544030018.676 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:14:07.858Z,1544030047.858 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T17:09:06.5Z 2018-12-05T17:14:07.858Z,1544030047.858 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T17:14:07.859Z,1544030047.859 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T17:14:12.814Z,1544030052.814 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0765.lzma 2018-12-05T17:14:13.589Z,1544030053.589 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0765.lzma.bak 2018-12-05T17:14:13.589Z,1544030053.589 [DataOverHttps](INFO): SBD MOMSN=8969354 2018-12-05T17:14:23.019Z,1544030063.019 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T17:14:23.081Z,1544030063.081 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20181203T211451/Express0766.lzma 2018-12-05T17:14:23.881Z,1544030063.881 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0766.lzma.bak 2018-12-05T17:14:23.881Z,1544030063.881 [DataOverHttps](INFO): SBD MOMSN=8969356 2018-12-05T17:14:25.305Z,1544030065.305 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T17:14:25.305Z,1544030065.305 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T17:14:25.305Z,1544030065.305 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T17:14:53.331Z,1544030093.331 [NAL9602](INFO): Powering down 2018-12-05T17:15:39.195Z,1544030139.195 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:15:39.195Z,1544030139.195 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-05T17:15:39.195Z,1544030139.195 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:15:39.197Z,1544030139.197 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:15:39.197Z,1544030139.197 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-05T17:15:39.198Z,1544030139.198 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:15:39.211Z,1544030139.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:15:39.211Z,1544030139.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:15:39.328Z,1544030139.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:15:39.328Z,1544030139.328 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-05T17:15:39.329Z,1544030139.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:15:39.329Z,1544030139.329 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-05T17:15:39.642Z,1544030139.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:15:39.643Z,1544030139.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:15:39.643Z,1544030139.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:15:39.650Z,1544030139.650 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:15:39.651Z,1544030139.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:15:39.651Z,1544030139.651 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:17:39.946Z,1544030259.946 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:17:39.946Z,1544030259.946 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-05T17:17:39.946Z,1544030259.946 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:17:39.948Z,1544030259.948 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:17:39.949Z,1544030259.949 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-05T17:17:39.949Z,1544030259.949 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:17:39.962Z,1544030259.962 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:17:39.991Z,1544030259.991 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:17:40.358Z,1544030260.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:17:40.358Z,1544030260.358 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-05T17:17:40.358Z,1544030260.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:17:40.358Z,1544030260.358 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-05T17:17:40.737Z,1544030260.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:17:40.738Z,1544030260.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:17:40.738Z,1544030260.738 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:17:40.739Z,1544030260.739 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:17:40.739Z,1544030260.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:17:40.739Z,1544030260.739 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:19:25.793Z,1544030365.793 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T17:19:25.793Z,1544030365.793 [Default:CheckIn:C.Wait] Stopped 2018-12-05T17:19:25.793Z,1544030365.793 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T17:19:25.793Z,1544030365.793 [Default:CheckIn:D] Running Loop=1 2018-12-05T17:19:26.197Z,1544030366.197 [Default:CheckIn:D] Stopped 2018-12-05T17:19:26.197Z,1544030366.197 [Default:CheckIn:E] Running Loop=1 2018-12-05T17:19:26.602Z,1544030366.602 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2644.569531 min 2018-12-05T17:19:26.602Z,1544030366.602 [Default:CheckIn:E] Stopped 2018-12-05T17:19:26.603Z,1544030366.603 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T17:19:26.603Z,1544030366.603 [Default:CheckIn] Stopped 2018-12-05T17:19:26.603Z,1544030366.603 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T17:19:26.603Z,1544030366.603 [Default:CheckIn](INFO): Running loop #257 2018-12-05T17:19:26.603Z,1544030366.603 [Default:CheckIn] Running Loop=257 2018-12-05T17:19:26.603Z,1544030366.603 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T17:19:26.603Z,1544030366.603 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T17:19:27.378Z,1544030367.378 [NAL9602](INFO): Powering up 2018-12-05T17:19:38.568Z,1544030378.568 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:19:39.368Z,1544030379.368 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T17:19:39.368Z,1544030379.368 [NAL9602] Data Fault, FailCount= 3 2018-12-05T17:19:39.369Z,1544030379.369 [NAL9602](ERROR): Data Fault 2018-12-05T17:19:39.430Z,1544030379.430 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T17:19:39.772Z,1544030379.772 [NAL9602](INFO): Powering down 2018-12-05T17:19:40.610Z,1544030380.610 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T17:19:40.610Z,1544030380.610 [NAL9602] No Fault, FailCount= 3 2018-12-05T17:19:40.999Z,1544030380.999 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:19:40.999Z,1544030380.999 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-05T17:19:40.999Z,1544030380.999 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:19:41.001Z,1544030381.001 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:19:41.001Z,1544030381.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-05T17:19:41.001Z,1544030381.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:19:41.016Z,1544030381.016 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:19:41.016Z,1544030381.016 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:19:41.413Z,1544030381.413 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:19:41.413Z,1544030381.413 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-05T17:19:41.414Z,1544030381.414 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:19:41.414Z,1544030381.414 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-05T17:19:41.784Z,1544030381.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:19:41.784Z,1544030381.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:19:41.784Z,1544030381.784 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:19:41.785Z,1544030381.785 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:19:41.785Z,1544030381.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:19:41.785Z,1544030381.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:20:09.881Z,1544030409.881 [NAL9602](INFO): Powering up NAL9602 2018-12-05T17:20:21.551Z,1544030421.551 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:21:41.899Z,1544030501.899 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:21:41.899Z,1544030501.899 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-05T17:21:41.899Z,1544030501.899 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:21:41.901Z,1544030501.901 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:21:41.901Z,1544030501.901 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-05T17:21:41.901Z,1544030501.901 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:21:41.914Z,1544030501.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:21:41.915Z,1544030501.915 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:21:42.347Z,1544030502.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:21:42.347Z,1544030502.347 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-05T17:21:42.347Z,1544030502.347 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:21:42.347Z,1544030502.347 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-05T17:21:42.714Z,1544030502.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:21:42.714Z,1544030502.714 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:21:42.715Z,1544030502.715 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:21:42.715Z,1544030502.715 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:21:42.716Z,1544030502.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:21:42.716Z,1544030502.716 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:22:30.267Z,1544030550.267 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T17:22:30.267Z,1544030550.267 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T17:22:30.267Z,1544030550.267 [DropWeight](ERROR): Hardware Fault 2018-12-05T17:22:30.332Z,1544030550.332 [CBIT](INFO): Critical error at 20181205T172230 2018-12-05T17:22:30.335Z,1544030550.335 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T17:22:30.335Z,1544030550.335 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T17:22:30.695Z,1544030550.695 [CBIT](INFO): Critical error at 20181205T172230 2018-12-05T17:23:42.886Z,1544030622.886 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:23:42.886Z,1544030622.886 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-05T17:23:42.886Z,1544030622.886 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:23:42.888Z,1544030622.888 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:23:42.888Z,1544030622.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-05T17:23:42.889Z,1544030622.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:23:42.940Z,1544030622.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:23:42.940Z,1544030622.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:23:43.326Z,1544030623.326 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:23:43.326Z,1544030623.326 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-05T17:23:43.327Z,1544030623.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:23:43.327Z,1544030623.327 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-05T17:23:43.690Z,1544030623.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:23:43.691Z,1544030623.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:23:43.691Z,1544030623.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:23:43.691Z,1544030623.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:23:43.692Z,1544030623.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:23:43.692Z,1544030623.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:24:27.650Z,1544030667.650 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T17:19:26.6Z 2018-12-05T17:24:27.650Z,1544030667.650 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T17:24:27.651Z,1544030667.651 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T17:24:32.600Z,1544030672.600 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0768.lzma 2018-12-05T17:24:33.401Z,1544030673.401 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0768.lzma.bak 2018-12-05T17:24:33.401Z,1544030673.401 [DataOverHttps](INFO): SBD MOMSN=8969516 2018-12-05T17:24:42.928Z,1544030682.928 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0769.lzma 2018-12-05T17:24:43.709Z,1544030683.709 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0769.lzma.bak 2018-12-05T17:24:43.709Z,1544030683.709 [DataOverHttps](INFO): SBD MOMSN=8969520 2018-12-05T17:24:45.106Z,1544030685.106 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T17:24:45.106Z,1544030685.106 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T17:24:45.106Z,1544030685.106 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T17:25:24.455Z,1544030724.455 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T17:25:44.068Z,1544030744.068 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:25:44.068Z,1544030744.068 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-05T17:25:44.068Z,1544030744.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:25:44.070Z,1544030744.070 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:25:44.070Z,1544030744.070 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-05T17:25:44.071Z,1544030744.071 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:25:44.096Z,1544030744.096 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:25:44.096Z,1544030744.096 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:25:44.489Z,1544030744.489 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:25:44.489Z,1544030744.489 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-05T17:25:44.490Z,1544030744.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:25:44.490Z,1544030744.490 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-05T17:25:44.878Z,1544030744.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:25:44.879Z,1544030744.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:25:44.879Z,1544030744.879 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:25:44.879Z,1544030744.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:25:44.880Z,1544030744.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:25:44.880Z,1544030744.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:25:54.858Z,1544030754.858 [NAL9602](INFO): Powering down 2018-12-05T17:27:45.106Z,1544030865.106 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:27:45.106Z,1544030865.106 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-05T17:27:45.106Z,1544030865.106 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:27:45.108Z,1544030865.108 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:27:45.108Z,1544030865.108 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-05T17:27:45.109Z,1544030865.109 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:27:45.122Z,1544030865.122 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:27:45.122Z,1544030865.122 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:27:45.518Z,1544030865.518 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:27:45.518Z,1544030865.518 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-05T17:27:45.519Z,1544030865.519 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:27:45.519Z,1544030865.519 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-05T17:27:45.906Z,1544030865.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:27:45.906Z,1544030865.906 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:27:45.907Z,1544030865.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:27:45.907Z,1544030865.907 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:27:45.908Z,1544030865.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:27:45.908Z,1544030865.908 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:29:45.246Z,1544030985.246 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T17:29:45.246Z,1544030985.246 [Default:CheckIn:C.Wait] Stopped 2018-12-05T17:29:45.246Z,1544030985.246 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T17:29:45.246Z,1544030985.246 [Default:CheckIn:D] Running Loop=1 2018-12-05T17:29:45.647Z,1544030985.647 [Default:CheckIn:D] Stopped 2018-12-05T17:29:45.647Z,1544030985.647 [Default:CheckIn:E] Running Loop=1 2018-12-05T17:29:46.041Z,1544030986.041 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:29:46.041Z,1544030986.041 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-05T17:29:46.041Z,1544030986.041 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:29:46.043Z,1544030986.043 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:29:46.044Z,1544030986.044 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-05T17:29:46.044Z,1544030986.044 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:29:46.047Z,1544030986.047 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2654.893750 min 2018-12-05T17:29:46.047Z,1544030986.047 [Default:CheckIn:E] Stopped 2018-12-05T17:29:46.048Z,1544030986.048 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T17:29:46.048Z,1544030986.048 [Default:CheckIn] Stopped 2018-12-05T17:29:46.048Z,1544030986.048 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T17:29:46.048Z,1544030986.048 [Default:CheckIn](INFO): Running loop #258 2018-12-05T17:29:46.048Z,1544030986.048 [Default:CheckIn] Running Loop=258 2018-12-05T17:29:46.048Z,1544030986.048 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T17:29:46.048Z,1544030986.048 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T17:29:46.060Z,1544030986.060 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:29:46.060Z,1544030986.060 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:29:46.463Z,1544030986.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:29:46.463Z,1544030986.463 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-05T17:29:46.463Z,1544030986.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:29:46.464Z,1544030986.464 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-05T17:29:46.813Z,1544030986.813 [NAL9602](INFO): Powering up 2018-12-05T17:29:46.832Z,1544030986.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:29:46.833Z,1544030986.833 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:29:46.833Z,1544030986.833 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:29:46.833Z,1544030986.833 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:29:46.834Z,1544030986.834 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:29:46.842Z,1544030986.842 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:29:58.019Z,1544030998.019 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:30:29.991Z,1544031029.991 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T17:30:30.074Z,1544031030.074 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T17:30:30.074Z,1544031030.074 [NAL9602] Data Fault, FailCount= 4 2018-12-05T17:30:30.074Z,1544031030.074 [NAL9602](ERROR): Data Fault 2018-12-05T17:30:30.161Z,1544031030.161 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T17:30:30.391Z,1544031030.391 [NAL9602](INFO): Powering down 2018-12-05T17:30:31.258Z,1544031031.258 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T17:30:31.258Z,1544031031.258 [NAL9602] No Fault, FailCount= 4 2018-12-05T17:31:00.757Z,1544031060.757 [NAL9602](INFO): Powering up NAL9602 2018-12-05T17:31:11.959Z,1544031071.959 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:31:12.760Z,1544031072.760 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T17:31:12.760Z,1544031072.760 [NAL9602] Data Fault, FailCount= 5 2018-12-05T17:31:12.761Z,1544031072.761 [NAL9602](ERROR): Data Fault 2018-12-05T17:31:12.820Z,1544031072.820 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T17:31:12.820Z,1544031072.820 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T17:31:16.021Z,1544031076.021 [NAL9602](INFO): Powering down 2018-12-05T17:31:16.084Z,1544031076.084 [CBIT](INFO): Critical error at 20181205T173112 2018-12-05T17:31:46.921Z,1544031106.921 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:31:46.921Z,1544031106.921 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-05T17:31:46.921Z,1544031106.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:31:46.923Z,1544031106.923 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:31:46.923Z,1544031106.923 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-05T17:31:46.924Z,1544031106.924 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:31:46.939Z,1544031106.939 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:31:46.939Z,1544031106.939 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:31:47.348Z,1544031107.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:31:47.348Z,1544031107.348 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-05T17:31:47.349Z,1544031107.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:31:47.349Z,1544031107.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-05T17:31:47.730Z,1544031107.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:31:47.730Z,1544031107.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:31:47.731Z,1544031107.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:31:47.731Z,1544031107.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:31:47.731Z,1544031107.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:31:47.732Z,1544031107.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:33:13.008Z,1544031193.008 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T17:33:13.008Z,1544031193.008 [NAL9602] No Fault, FailCount= 5 2018-12-05T17:33:13.367Z,1544031193.367 [NAL9602](INFO): Powering up NAL9602 2018-12-05T17:33:24.567Z,1544031204.567 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:33:47.771Z,1544031227.771 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:33:47.771Z,1544031227.771 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-05T17:33:47.771Z,1544031227.771 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:33:47.773Z,1544031227.773 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:33:47.773Z,1544031227.773 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-05T17:33:47.773Z,1544031227.773 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:33:47.812Z,1544031227.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:33:47.812Z,1544031227.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:33:48.209Z,1544031228.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:33:48.209Z,1544031228.209 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-05T17:33:48.210Z,1544031228.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:33:48.210Z,1544031228.210 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-05T17:33:48.606Z,1544031228.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:33:48.606Z,1544031228.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:33:48.607Z,1544031228.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:33:48.607Z,1544031228.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:33:48.608Z,1544031228.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:33:48.608Z,1544031228.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:34:47.255Z,1544031287.255 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T17:29:46.0Z 2018-12-05T17:34:47.255Z,1544031287.255 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T17:34:47.255Z,1544031287.255 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T17:34:52.426Z,1544031292.426 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0771.lzma 2018-12-05T17:34:53.217Z,1544031293.217 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0771.lzma.bak 2018-12-05T17:34:53.217Z,1544031293.217 [DataOverHttps](INFO): SBD MOMSN=8969560 2018-12-05T17:35:02.621Z,1544031302.621 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T17:35:02.715Z,1544031302.715 [DataOverHttps](INFO): Sending 341 bytes from file Logs/20181203T211451/Express0772.lzma 2018-12-05T17:35:03.505Z,1544031303.505 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0772.lzma.bak 2018-12-05T17:35:03.505Z,1544031303.505 [DataOverHttps](INFO): SBD MOMSN=8969563 2018-12-05T17:35:04.868Z,1544031304.868 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T17:35:04.868Z,1544031304.868 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T17:35:04.868Z,1544031304.868 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T17:35:33.007Z,1544031333.007 [NAL9602](INFO): Powering down 2018-12-05T17:35:48.711Z,1544031348.711 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:35:48.711Z,1544031348.711 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-05T17:35:48.711Z,1544031348.711 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:35:48.714Z,1544031348.714 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:35:48.714Z,1544031348.714 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-05T17:35:48.714Z,1544031348.714 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:35:48.728Z,1544031348.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:35:48.728Z,1544031348.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:35:49.128Z,1544031349.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:35:49.129Z,1544031349.129 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-05T17:35:49.129Z,1544031349.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:35:49.129Z,1544031349.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-05T17:35:49.497Z,1544031349.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:35:49.498Z,1544031349.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:35:49.498Z,1544031349.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:35:49.499Z,1544031349.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:35:49.499Z,1544031349.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:35:49.499Z,1544031349.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:37:30.625Z,1544031450.625 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T17:37:30.625Z,1544031450.625 [DropWeight] No Fault, FailCount= 1 2018-12-05T17:37:49.802Z,1544031469.802 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:37:49.802Z,1544031469.802 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-05T17:37:49.802Z,1544031469.802 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:37:49.804Z,1544031469.804 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:37:49.805Z,1544031469.805 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-05T17:37:49.805Z,1544031469.805 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:37:49.818Z,1544031469.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:37:49.818Z,1544031469.818 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:37:50.220Z,1544031470.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:37:50.220Z,1544031470.220 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-05T17:37:50.221Z,1544031470.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:37:50.221Z,1544031470.221 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-05T17:37:50.606Z,1544031470.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:37:50.606Z,1544031470.606 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:37:50.607Z,1544031470.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:37:50.607Z,1544031470.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:37:50.608Z,1544031470.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:37:50.608Z,1544031470.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:39:50.692Z,1544031590.692 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:39:50.692Z,1544031590.692 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-05T17:39:50.692Z,1544031590.692 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:39:50.694Z,1544031590.694 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:39:50.695Z,1544031590.695 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-05T17:39:50.695Z,1544031590.695 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:39:50.708Z,1544031590.708 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:39:50.708Z,1544031590.708 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:39:51.107Z,1544031591.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:39:51.107Z,1544031591.107 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-05T17:39:51.108Z,1544031591.108 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:39:51.108Z,1544031591.108 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-05T17:39:51.498Z,1544031591.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:39:51.498Z,1544031591.498 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:39:51.499Z,1544031591.499 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:39:51.499Z,1544031591.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:39:51.500Z,1544031591.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:39:51.500Z,1544031591.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:40:05.097Z,1544031605.097 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T17:40:05.097Z,1544031605.097 [Default:CheckIn:C.Wait] Stopped 2018-12-05T17:40:05.097Z,1544031605.097 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T17:40:05.097Z,1544031605.097 [Default:CheckIn:D] Running Loop=1 2018-12-05T17:40:05.502Z,1544031605.502 [Default:CheckIn:D] Stopped 2018-12-05T17:40:05.502Z,1544031605.502 [Default:CheckIn:E] Running Loop=1 2018-12-05T17:40:05.897Z,1544031605.897 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2665.224740 min 2018-12-05T17:40:05.897Z,1544031605.897 [Default:CheckIn:E] Stopped 2018-12-05T17:40:05.897Z,1544031605.897 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T17:40:05.897Z,1544031605.897 [Default:CheckIn] Stopped 2018-12-05T17:40:05.898Z,1544031605.898 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T17:40:05.898Z,1544031605.898 [Default:CheckIn](INFO): Running loop #259 2018-12-05T17:40:05.898Z,1544031605.898 [Default:CheckIn] Running Loop=259 2018-12-05T17:40:05.898Z,1544031605.898 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T17:40:05.898Z,1544031605.898 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T17:40:06.665Z,1544031606.665 [NAL9602](INFO): Powering up 2018-12-05T17:40:17.468Z,1544031617.468 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:40:49.436Z,1544031649.436 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T17:40:49.510Z,1544031649.510 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T17:40:49.510Z,1544031649.510 [NAL9602] Data Fault, FailCount= 1 2018-12-05T17:40:49.510Z,1544031649.510 [NAL9602](ERROR): Data Fault 2018-12-05T17:40:49.561Z,1544031649.561 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T17:40:49.836Z,1544031649.836 [NAL9602](INFO): Powering down 2018-12-05T17:40:50.680Z,1544031650.680 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T17:40:50.680Z,1544031650.680 [NAL9602] No Fault, FailCount= 1 2018-12-05T17:41:19.952Z,1544031679.952 [NAL9602](INFO): Powering up NAL9602 2018-12-05T17:41:31.151Z,1544031691.151 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:41:51.635Z,1544031711.635 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:41:51.635Z,1544031711.635 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-05T17:41:51.635Z,1544031711.635 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:41:51.637Z,1544031711.637 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:41:51.637Z,1544031711.637 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-05T17:41:51.637Z,1544031711.637 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:41:51.651Z,1544031711.651 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:41:51.651Z,1544031711.651 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:41:52.049Z,1544031712.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:41:52.049Z,1544031712.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-05T17:41:52.050Z,1544031712.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:41:52.050Z,1544031712.050 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-05T17:41:52.434Z,1544031712.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:41:52.435Z,1544031712.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:41:52.435Z,1544031712.435 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:41:52.436Z,1544031712.436 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:41:52.436Z,1544031712.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:41:52.436Z,1544031712.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:43:52.745Z,1544031832.745 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:43:52.745Z,1544031832.745 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-05T17:43:52.745Z,1544031832.745 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:43:52.748Z,1544031832.748 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:43:52.748Z,1544031832.748 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-05T17:43:52.748Z,1544031832.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:43:52.761Z,1544031832.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:43:52.762Z,1544031832.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:43:53.162Z,1544031833.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:43:53.162Z,1544031833.162 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-05T17:43:53.163Z,1544031833.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:43:53.163Z,1544031833.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-05T17:43:53.550Z,1544031833.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:43:53.551Z,1544031833.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:43:53.551Z,1544031833.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:43:53.551Z,1544031833.551 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:43:53.552Z,1544031833.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:43:53.552Z,1544031833.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:45:07.314Z,1544031907.314 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T17:40:05.9Z 2018-12-05T17:45:07.314Z,1544031907.314 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T17:45:07.314Z,1544031907.314 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T17:45:12.241Z,1544031912.241 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0774.lzma 2018-12-05T17:45:13.041Z,1544031913.041 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0774.lzma.bak 2018-12-05T17:45:13.041Z,1544031913.041 [DataOverHttps](INFO): SBD MOMSN=8969661 2018-12-05T17:45:22.625Z,1544031922.625 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T17:45:22.716Z,1544031922.716 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0775.lzma 2018-12-05T17:45:23.493Z,1544031923.493 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0775.lzma.bak 2018-12-05T17:45:23.493Z,1544031923.493 [DataOverHttps](INFO): SBD MOMSN=8969663 2018-12-05T17:45:24.886Z,1544031924.886 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T17:45:24.886Z,1544031924.886 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T17:45:24.886Z,1544031924.886 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T17:45:52.863Z,1544031952.863 [NAL9602](INFO): Powering down 2018-12-05T17:45:53.687Z,1544031953.687 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:45:53.687Z,1544031953.687 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-05T17:45:53.687Z,1544031953.687 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:45:53.689Z,1544031953.689 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:45:53.689Z,1544031953.689 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-05T17:45:53.690Z,1544031953.690 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:45:53.703Z,1544031953.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:45:53.703Z,1544031953.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:45:54.106Z,1544031954.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:45:54.106Z,1544031954.106 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-05T17:45:54.106Z,1544031954.106 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:45:54.106Z,1544031954.106 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-05T17:45:54.494Z,1544031954.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:45:54.494Z,1544031954.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:45:54.495Z,1544031954.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:45:54.495Z,1544031954.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:45:54.495Z,1544031954.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:45:54.496Z,1544031954.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:47:54.645Z,1544032074.645 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:47:54.645Z,1544032074.645 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-05T17:47:54.645Z,1544032074.645 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:47:54.647Z,1544032074.647 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:47:54.647Z,1544032074.647 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-05T17:47:54.647Z,1544032074.647 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:47:54.660Z,1544032074.660 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:47:54.661Z,1544032074.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:47:55.060Z,1544032075.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:47:55.060Z,1544032075.060 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-05T17:47:55.061Z,1544032075.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:47:55.061Z,1544032075.061 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-05T17:47:55.454Z,1544032075.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:47:55.454Z,1544032075.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:47:55.455Z,1544032075.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:47:55.455Z,1544032075.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:47:55.455Z,1544032075.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:47:55.456Z,1544032075.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:49:55.729Z,1544032195.729 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:49:55.729Z,1544032195.730 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-05T17:49:55.730Z,1544032195.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:49:55.732Z,1544032195.732 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:49:55.732Z,1544032195.732 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-05T17:49:55.732Z,1544032195.732 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:49:55.750Z,1544032195.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:49:55.750Z,1544032195.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:49:56.145Z,1544032196.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:49:56.145Z,1544032196.145 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-05T17:49:56.146Z,1544032196.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:49:56.146Z,1544032196.146 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-05T17:49:56.533Z,1544032196.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:49:56.534Z,1544032196.534 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:49:56.541Z,1544032196.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:49:56.542Z,1544032196.542 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:49:56.542Z,1544032196.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:49:56.543Z,1544032196.543 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:50:25.301Z,1544032225.301 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T17:50:25.301Z,1544032225.301 [Default:CheckIn:C.Wait] Stopped 2018-12-05T17:50:25.301Z,1544032225.301 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T17:50:25.301Z,1544032225.301 [Default:CheckIn:D] Running Loop=1 2018-12-05T17:50:25.708Z,1544032225.708 [Default:CheckIn:D] Stopped 2018-12-05T17:50:25.709Z,1544032225.709 [Default:CheckIn:E] Running Loop=1 2018-12-05T17:50:26.088Z,1544032226.088 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2675.561458 min 2018-12-05T17:50:26.088Z,1544032226.088 [Default:CheckIn:E] Stopped 2018-12-05T17:50:26.089Z,1544032226.089 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T17:50:26.089Z,1544032226.089 [Default:CheckIn] Stopped 2018-12-05T17:50:26.089Z,1544032226.089 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T17:50:26.089Z,1544032226.089 [Default:CheckIn](INFO): Running loop #260 2018-12-05T17:50:26.089Z,1544032226.089 [Default:CheckIn] Running Loop=260 2018-12-05T17:50:26.089Z,1544032226.089 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T17:50:26.089Z,1544032226.089 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T17:50:26.871Z,1544032226.871 [NAL9602](INFO): Powering up 2018-12-05T17:50:38.068Z,1544032238.068 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:50:38.868Z,1544032238.868 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T17:50:38.868Z,1544032238.868 [NAL9602] Data Fault, FailCount= 2 2018-12-05T17:50:38.868Z,1544032238.868 [NAL9602](ERROR): Data Fault 2018-12-05T17:50:38.930Z,1544032238.930 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T17:50:39.268Z,1544032239.268 [NAL9602](INFO): Powering down 2018-12-05T17:50:40.116Z,1544032240.116 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T17:50:40.116Z,1544032240.116 [NAL9602] No Fault, FailCount= 2 2018-12-05T17:51:09.392Z,1544032269.392 [NAL9602](INFO): Powering up NAL9602 2018-12-05T17:51:21.036Z,1544032281.036 [NAL9602](INFO): NAL9602 initialized 2018-12-05T17:51:56.658Z,1544032316.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:51:56.658Z,1544032316.658 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-05T17:51:56.659Z,1544032316.659 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:51:56.661Z,1544032316.661 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:51:56.661Z,1544032316.661 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-05T17:51:56.661Z,1544032316.661 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:51:56.705Z,1544032316.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:51:56.705Z,1544032316.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:51:57.049Z,1544032317.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:51:57.049Z,1544032317.049 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-05T17:51:57.050Z,1544032317.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:51:57.050Z,1544032317.050 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-05T17:51:57.438Z,1544032317.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:51:57.438Z,1544032317.438 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:51:57.439Z,1544032317.439 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:51:57.439Z,1544032317.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:51:57.439Z,1544032317.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:51:57.440Z,1544032317.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:53:57.775Z,1544032437.775 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:53:57.775Z,1544032437.775 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-05T17:53:57.775Z,1544032437.775 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:53:57.777Z,1544032437.777 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:53:57.778Z,1544032437.778 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-05T17:53:57.778Z,1544032437.778 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:53:57.812Z,1544032437.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:53:57.812Z,1544032437.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:53:58.210Z,1544032438.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:53:58.211Z,1544032438.211 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-05T17:53:58.211Z,1544032438.211 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:53:58.211Z,1544032438.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-05T17:53:58.572Z,1544032438.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:53:58.573Z,1544032438.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:53:58.573Z,1544032438.573 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:53:58.573Z,1544032438.573 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:53:58.574Z,1544032438.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:53:58.574Z,1544032438.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:55:27.098Z,1544032527.098 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T17:50:26.1Z 2018-12-05T17:55:27.099Z,1544032527.099 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T17:55:27.099Z,1544032527.099 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T17:55:32.064Z,1544032532.064 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0777.lzma 2018-12-05T17:55:32.846Z,1544032532.846 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0777.lzma.bak 2018-12-05T17:55:32.847Z,1544032532.847 [DataOverHttps](INFO): SBD MOMSN=8969693 2018-12-05T17:55:42.279Z,1544032542.279 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0778.lzma 2018-12-05T17:55:43.050Z,1544032543.050 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0778.lzma.bak 2018-12-05T17:55:43.050Z,1544032543.050 [DataOverHttps](INFO): SBD MOMSN=8969695 2018-12-05T17:55:44.419Z,1544032544.419 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T17:55:44.419Z,1544032544.419 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T17:55:44.419Z,1544032544.419 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T17:55:58.870Z,1544032558.870 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:55:58.870Z,1544032558.870 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-05T17:55:58.870Z,1544032558.870 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:55:58.872Z,1544032558.872 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:55:58.873Z,1544032558.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-05T17:55:58.873Z,1544032558.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:55:58.886Z,1544032558.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:55:58.921Z,1544032558.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:55:59.274Z,1544032559.274 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:55:59.275Z,1544032559.275 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-05T17:55:59.275Z,1544032559.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:55:59.275Z,1544032559.275 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-05T17:55:59.662Z,1544032559.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:55:59.663Z,1544032559.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:55:59.663Z,1544032559.663 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:55:59.663Z,1544032559.663 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:55:59.664Z,1544032559.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:55:59.664Z,1544032559.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:56:24.157Z,1544032584.157 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T17:56:54.956Z,1544032614.956 [NAL9602](INFO): Powering down 2018-12-05T17:57:59.955Z,1544032679.955 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:57:59.955Z,1544032679.955 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-05T17:57:59.955Z,1544032679.955 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T17:57:59.957Z,1544032679.957 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T17:57:59.957Z,1544032679.957 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-05T17:57:59.957Z,1544032679.957 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T17:57:59.970Z,1544032679.970 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T17:57:59.971Z,1544032679.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T17:58:00.374Z,1544032680.374 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T17:58:00.374Z,1544032680.374 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-05T17:58:00.375Z,1544032680.375 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T17:58:00.375Z,1544032680.375 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-05T17:58:00.762Z,1544032680.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T17:58:00.762Z,1544032680.762 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:58:00.763Z,1544032680.763 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T17:58:00.763Z,1544032680.763 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T17:58:00.763Z,1544032680.763 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T17:58:00.764Z,1544032680.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:00:01.130Z,1544032801.130 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:00:01.130Z,1544032801.130 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-05T18:00:01.130Z,1544032801.130 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:00:01.143Z,1544032801.143 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:00:01.143Z,1544032801.143 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-05T18:00:01.143Z,1544032801.143 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:00:01.157Z,1544032801.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:00:01.157Z,1544032801.157 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:00:01.574Z,1544032801.574 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:00:01.575Z,1544032801.575 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-05T18:00:01.575Z,1544032801.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:00:01.575Z,1544032801.575 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-05T18:00:01.942Z,1544032801.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:00:01.942Z,1544032801.942 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:00:01.943Z,1544032801.943 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:00:01.943Z,1544032801.943 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:00:01.943Z,1544032801.943 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:00:01.944Z,1544032801.944 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:00:44.802Z,1544032844.802 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T18:00:44.803Z,1544032844.803 [Default:CheckIn:C.Wait] Stopped 2018-12-05T18:00:44.803Z,1544032844.803 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T18:00:44.803Z,1544032844.803 [Default:CheckIn:D] Running Loop=1 2018-12-05T18:00:45.211Z,1544032845.211 [Default:CheckIn:D] Stopped 2018-12-05T18:00:45.211Z,1544032845.211 [Default:CheckIn:E] Running Loop=1 2018-12-05T18:00:45.606Z,1544032845.606 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2685.886458 min 2018-12-05T18:00:45.606Z,1544032845.606 [Default:CheckIn:E] Stopped 2018-12-05T18:00:45.606Z,1544032845.606 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T18:00:45.607Z,1544032845.607 [Default:CheckIn] Stopped 2018-12-05T18:00:45.607Z,1544032845.607 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T18:00:45.607Z,1544032845.607 [Default:CheckIn](INFO): Running loop #261 2018-12-05T18:00:45.607Z,1544032845.607 [Default:CheckIn] Running Loop=261 2018-12-05T18:00:45.607Z,1544032845.607 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T18:00:45.607Z,1544032845.607 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T18:00:46.379Z,1544032846.379 [NAL9602](INFO): Powering up 2018-12-05T18:00:57.576Z,1544032857.576 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:01:29.536Z,1544032889.536 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T18:01:29.611Z,1544032889.611 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T18:01:29.611Z,1544032889.611 [NAL9602] Data Fault, FailCount= 3 2018-12-05T18:01:29.611Z,1544032889.611 [NAL9602](ERROR): Data Fault 2018-12-05T18:01:29.685Z,1544032889.685 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T18:01:29.932Z,1544032889.932 [NAL9602](INFO): Powering down 2018-12-05T18:01:30.786Z,1544032890.786 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T18:01:30.786Z,1544032890.786 [NAL9602] No Fault, FailCount= 3 2018-12-05T18:02:00.312Z,1544032920.312 [NAL9602](INFO): Powering up NAL9602 2018-12-05T18:02:02.342Z,1544032922.342 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:02:02.342Z,1544032922.342 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-05T18:02:02.343Z,1544032922.343 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:02:02.345Z,1544032922.345 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:02:02.345Z,1544032922.345 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-05T18:02:02.345Z,1544032922.345 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:02:02.358Z,1544032922.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:02:02.358Z,1544032922.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:02:02.747Z,1544032922.747 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:02:02.747Z,1544032922.747 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-05T18:02:02.748Z,1544032922.748 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:02:02.748Z,1544032922.748 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-05T18:02:03.142Z,1544032923.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:02:03.142Z,1544032923.142 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:02:03.143Z,1544032923.143 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:02:03.143Z,1544032923.143 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:02:03.143Z,1544032923.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:02:03.144Z,1544032923.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:02:11.512Z,1544032931.512 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:02:12.313Z,1544032932.313 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T18:02:12.313Z,1544032932.313 [NAL9602] Data Fault, FailCount= 4 2018-12-05T18:02:12.313Z,1544032932.313 [NAL9602](ERROR): Data Fault 2018-12-05T18:02:12.376Z,1544032932.376 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T18:02:15.418Z,1544032935.418 [NAL9602](INFO): Powering down 2018-12-05T18:02:15.909Z,1544032935.909 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T18:02:15.909Z,1544032935.909 [NAL9602] No Fault, FailCount= 4 2018-12-05T18:02:45.468Z,1544032965.468 [NAL9602](INFO): Powering up NAL9602 2018-12-05T18:02:56.383Z,1544032976.383 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:04:03.274Z,1544033043.274 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:04:03.274Z,1544033043.274 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-05T18:04:03.274Z,1544033043.274 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:04:03.276Z,1544033043.276 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:04:03.276Z,1544033043.276 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-05T18:04:03.277Z,1544033043.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:04:03.327Z,1544033043.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:04:03.327Z,1544033043.327 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:04:03.673Z,1544033043.673 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:04:03.673Z,1544033043.673 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-05T18:04:03.673Z,1544033043.673 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:04:03.673Z,1544033043.673 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-05T18:04:04.066Z,1544033044.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:04:04.066Z,1544033044.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:04:04.067Z,1544033044.067 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:04:04.067Z,1544033044.067 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:04:04.067Z,1544033044.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:04:04.068Z,1544033044.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:05:47.041Z,1544033147.041 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T18:00:45.6Z 2018-12-05T18:05:47.041Z,1544033147.041 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T18:05:47.041Z,1544033147.041 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T18:05:52.077Z,1544033152.077 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0780.lzma 2018-12-05T18:05:52.879Z,1544033152.879 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0780.lzma.bak 2018-12-05T18:05:52.879Z,1544033152.879 [DataOverHttps](INFO): SBD MOMSN=8969775 2018-12-05T18:06:02.334Z,1544033162.334 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T18:06:02.512Z,1544033162.512 [DataOverHttps](INFO): Sending 346 bytes from file Logs/20181203T211451/Express0781.lzma 2018-12-05T18:06:03.309Z,1544033163.309 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0781.lzma.bak 2018-12-05T18:06:03.309Z,1544033163.309 [DataOverHttps](INFO): SBD MOMSN=8969777 2018-12-05T18:06:04.723Z,1544033164.723 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:06:04.723Z,1544033164.723 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-05T18:06:04.724Z,1544033164.724 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:06:04.726Z,1544033164.726 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:06:04.726Z,1544033164.726 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-05T18:06:04.726Z,1544033164.726 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:06:04.728Z,1544033164.728 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T18:06:04.728Z,1544033164.728 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T18:06:04.728Z,1544033164.728 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T18:06:04.768Z,1544033164.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:06:04.768Z,1544033164.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:06:04.852Z,1544033164.852 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:06:04.852Z,1544033164.852 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-05T18:06:04.853Z,1544033164.853 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:06:04.853Z,1544033164.853 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-05T18:06:07.983Z,1544033167.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:06:07.984Z,1544033167.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:06:07.984Z,1544033167.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:06:07.984Z,1544033167.984 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:06:07.985Z,1544033167.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:06:07.985Z,1544033167.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:06:32.811Z,1544033192.811 [NAL9602](INFO): Powering down 2018-12-05T18:07:32.075Z,1544033252.075 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T18:07:32.075Z,1544033252.075 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T18:07:32.075Z,1544033252.075 [DropWeight](ERROR): Hardware Fault 2018-12-05T18:07:32.140Z,1544033252.140 [CBIT](INFO): Critical error at 20181205T180732 2018-12-05T18:07:32.143Z,1544033252.143 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T18:07:32.143Z,1544033252.143 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T18:07:32.521Z,1544033252.521 [CBIT](INFO): Critical error at 20181205T180732 2018-12-05T18:08:08.067Z,1544033288.067 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:08:08.067Z,1544033288.067 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-05T18:08:08.067Z,1544033288.067 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:08:08.069Z,1544033288.069 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:08:08.069Z,1544033288.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-05T18:08:08.069Z,1544033288.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:08:08.113Z,1544033288.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:08:08.113Z,1544033288.113 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:08:08.504Z,1544033288.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:08:08.504Z,1544033288.504 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-05T18:08:08.505Z,1544033288.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:08:08.505Z,1544033288.505 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-05T18:08:08.866Z,1544033288.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:08:08.867Z,1544033288.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:08:08.867Z,1544033288.867 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:08:08.867Z,1544033288.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:08:08.868Z,1544033288.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:08:08.868Z,1544033288.868 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:10:09.210Z,1544033409.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:10:09.211Z,1544033409.211 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-05T18:10:09.211Z,1544033409.211 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:10:09.213Z,1544033409.213 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:10:09.213Z,1544033409.213 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-05T18:10:09.213Z,1544033409.213 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:10:09.227Z,1544033409.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:10:09.227Z,1544033409.227 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:10:09.625Z,1544033409.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:10:09.625Z,1544033409.625 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-05T18:10:09.626Z,1544033409.626 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:10:09.626Z,1544033409.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-05T18:10:10.005Z,1544033410.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:10:10.006Z,1544033410.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:10:10.006Z,1544033410.006 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:10:10.006Z,1544033410.006 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:10:10.007Z,1544033410.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:10:10.007Z,1544033410.007 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:10:58.320Z,1544033458.320 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T18:11:05.124Z,1544033465.124 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T18:11:05.124Z,1544033465.124 [Default:CheckIn:C.Wait] Stopped 2018-12-05T18:11:05.125Z,1544033465.125 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T18:11:05.125Z,1544033465.125 [Default:CheckIn:D] Running Loop=1 2018-12-05T18:11:05.530Z,1544033465.530 [Default:CheckIn:D] Stopped 2018-12-05T18:11:05.530Z,1544033465.530 [Default:CheckIn:E] Running Loop=1 2018-12-05T18:11:05.934Z,1544033465.934 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2696.225000 min 2018-12-05T18:11:05.934Z,1544033465.934 [Default:CheckIn:E] Stopped 2018-12-05T18:11:05.934Z,1544033465.934 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T18:11:05.934Z,1544033465.934 [Default:CheckIn] Stopped 2018-12-05T18:11:05.934Z,1544033465.934 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T18:11:05.934Z,1544033465.934 [Default:CheckIn](INFO): Running loop #262 2018-12-05T18:11:05.934Z,1544033465.934 [Default:CheckIn] Running Loop=262 2018-12-05T18:11:05.935Z,1544033465.935 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T18:11:05.935Z,1544033465.935 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T18:11:06.702Z,1544033466.702 [NAL9602](INFO): Powering up 2018-12-05T18:11:17.503Z,1544033477.503 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:12:10.163Z,1544033530.163 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:12:10.163Z,1544033530.163 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-05T18:12:10.163Z,1544033530.163 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:12:10.165Z,1544033530.165 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:12:10.165Z,1544033530.165 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-05T18:12:10.165Z,1544033530.165 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:12:10.179Z,1544033530.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:12:10.180Z,1544033530.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:12:10.579Z,1544033530.579 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:12:10.579Z,1544033530.579 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-05T18:12:10.580Z,1544033530.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:12:10.580Z,1544033530.580 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-05T18:12:10.945Z,1544033530.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:12:10.946Z,1544033530.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:12:10.946Z,1544033530.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:12:10.947Z,1544033530.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:12:10.947Z,1544033530.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:12:10.947Z,1544033530.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:14:11.040Z,1544033651.040 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:14:11.040Z,1544033651.040 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-05T18:14:11.040Z,1544033651.040 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:14:11.042Z,1544033651.042 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:14:11.042Z,1544033651.042 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-05T18:14:11.042Z,1544033651.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:14:11.077Z,1544033651.077 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:14:11.077Z,1544033651.077 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:14:11.479Z,1544033651.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:14:11.479Z,1544033651.479 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-05T18:14:11.479Z,1544033651.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:14:11.479Z,1544033651.479 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-05T18:14:11.858Z,1544033651.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:14:11.858Z,1544033651.858 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:14:11.859Z,1544033651.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:14:11.859Z,1544033651.859 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:14:11.859Z,1544033651.859 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:14:11.860Z,1544033651.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:16:07.043Z,1544033767.043 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T18:11:05.9Z 2018-12-05T18:16:07.043Z,1544033767.043 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T18:16:07.043Z,1544033767.043 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T18:16:11.962Z,1544033771.962 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:16:11.963Z,1544033771.963 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-05T18:16:11.963Z,1544033771.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:16:11.965Z,1544033771.965 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:16:11.965Z,1544033771.965 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-05T18:16:11.965Z,1544033771.965 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:16:12.007Z,1544033772.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:16:12.007Z,1544033772.007 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:16:12.037Z,1544033772.037 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0783.lzma 2018-12-05T18:16:12.191Z,1544033772.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:16:12.191Z,1544033772.191 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-05T18:16:12.191Z,1544033772.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:16:12.191Z,1544033772.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-05T18:16:12.441Z,1544033772.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:16:12.442Z,1544033772.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:16:12.442Z,1544033772.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:16:12.442Z,1544033772.442 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:16:12.443Z,1544033772.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:16:12.443Z,1544033772.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:16:12.817Z,1544033772.817 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0783.lzma.bak 2018-12-05T18:16:12.817Z,1544033772.817 [DataOverHttps](INFO): SBD MOMSN=8969806 2018-12-05T18:16:22.304Z,1544033782.304 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T18:16:22.390Z,1544033782.390 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0784.lzma 2018-12-05T18:16:23.185Z,1544033783.185 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0784.lzma.bak 2018-12-05T18:16:23.185Z,1544033783.185 [DataOverHttps](INFO): SBD MOMSN=8969810 2018-12-05T18:16:24.576Z,1544033784.576 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T18:16:24.576Z,1544033784.576 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T18:16:24.576Z,1544033784.576 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T18:16:52.591Z,1544033812.591 [NAL9602](INFO): Powering down 2018-12-05T18:18:13.921Z,1544033893.921 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:18:13.921Z,1544033893.921 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-05T18:18:13.921Z,1544033893.921 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:18:13.923Z,1544033893.923 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:18:13.923Z,1544033893.923 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-05T18:18:13.923Z,1544033893.923 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:18:13.937Z,1544033893.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:18:13.937Z,1544033893.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:18:14.050Z,1544033894.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:18:14.050Z,1544033894.050 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-05T18:18:14.051Z,1544033894.051 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:18:14.051Z,1544033894.051 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-05T18:18:14.374Z,1544033894.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:18:14.374Z,1544033894.374 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:18:14.375Z,1544033894.375 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:18:14.375Z,1544033894.375 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:18:14.375Z,1544033894.375 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:18:14.376Z,1544033894.376 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:20:14.386Z,1544034014.386 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:20:14.387Z,1544034014.387 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-05T18:20:14.387Z,1544034014.387 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:20:14.389Z,1544034014.389 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:20:14.389Z,1544034014.389 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-05T18:20:14.389Z,1544034014.389 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:20:14.403Z,1544034014.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:20:14.403Z,1544034014.403 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:20:14.798Z,1544034014.798 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:20:14.798Z,1544034014.798 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-05T18:20:14.799Z,1544034014.799 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:20:14.799Z,1544034014.799 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-05T18:20:15.176Z,1544034015.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:20:15.177Z,1544034015.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:20:15.177Z,1544034015.177 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:20:15.177Z,1544034015.177 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:20:15.178Z,1544034015.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:20:15.178Z,1544034015.178 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:21:24.799Z,1544034084.799 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T18:21:24.800Z,1544034084.800 [Default:CheckIn:C.Wait] Stopped 2018-12-05T18:21:24.800Z,1544034084.800 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T18:21:24.800Z,1544034084.800 [Default:CheckIn:D] Running Loop=1 2018-12-05T18:21:25.200Z,1544034085.200 [Default:CheckIn:D] Stopped 2018-12-05T18:21:25.200Z,1544034085.200 [Default:CheckIn:E] Running Loop=1 2018-12-05T18:21:25.606Z,1544034085.606 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2706.552865 min 2018-12-05T18:21:25.606Z,1544034085.606 [Default:CheckIn:E] Stopped 2018-12-05T18:21:25.606Z,1544034085.606 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T18:21:25.607Z,1544034085.607 [Default:CheckIn] Stopped 2018-12-05T18:21:25.607Z,1544034085.607 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T18:21:25.607Z,1544034085.607 [Default:CheckIn](INFO): Running loop #263 2018-12-05T18:21:25.607Z,1544034085.607 [Default:CheckIn] Running Loop=263 2018-12-05T18:21:25.607Z,1544034085.607 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T18:21:25.607Z,1544034085.607 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T18:21:26.369Z,1544034086.369 [NAL9602](INFO): Powering up 2018-12-05T18:21:37.571Z,1544034097.571 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:21:38.372Z,1544034098.372 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T18:21:38.372Z,1544034098.372 [NAL9602] Data Fault, FailCount= 5 2018-12-05T18:21:38.372Z,1544034098.372 [NAL9602](ERROR): Data Fault 2018-12-05T18:21:38.443Z,1544034098.443 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T18:21:38.443Z,1544034098.443 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T18:21:38.771Z,1544034098.771 [NAL9602](INFO): Powering down 2018-12-05T18:21:38.818Z,1544034098.818 [CBIT](INFO): Critical error at 20181205T182138 2018-12-05T18:22:15.553Z,1544034135.553 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:22:15.553Z,1544034135.553 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-05T18:22:15.554Z,1544034135.554 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:22:15.556Z,1544034135.556 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:22:15.556Z,1544034135.556 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-05T18:22:15.556Z,1544034135.556 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:22:15.570Z,1544034135.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:22:15.570Z,1544034135.570 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:22:15.965Z,1544034135.965 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:22:15.966Z,1544034135.966 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-05T18:22:15.966Z,1544034135.966 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:22:15.966Z,1544034135.966 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-05T18:22:16.338Z,1544034136.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:22:16.339Z,1544034136.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:22:16.339Z,1544034136.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:22:16.339Z,1544034136.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:22:16.340Z,1544034136.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:22:16.340Z,1544034136.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:22:32.326Z,1544034152.326 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T18:22:32.326Z,1544034152.326 [DropWeight] No Fault, FailCount= 1 2018-12-05T18:23:38.452Z,1544034218.452 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T18:23:38.452Z,1544034218.452 [NAL9602] No Fault, FailCount= 5 2018-12-05T18:23:38.811Z,1544034218.811 [NAL9602](INFO): Powering up NAL9602 2018-12-05T18:23:50.012Z,1544034230.012 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:24:16.477Z,1544034256.477 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:24:16.477Z,1544034256.477 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-05T18:24:16.477Z,1544034256.477 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:24:16.479Z,1544034256.479 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:24:16.480Z,1544034256.480 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-05T18:24:16.480Z,1544034256.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:24:16.493Z,1544034256.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:24:16.493Z,1544034256.493 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:24:16.895Z,1544034256.895 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:24:16.895Z,1544034256.895 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-05T18:24:16.895Z,1544034256.895 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:24:16.896Z,1544034256.896 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-05T18:24:17.282Z,1544034257.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:24:17.282Z,1544034257.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:24:17.283Z,1544034257.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:24:17.283Z,1544034257.283 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:24:17.284Z,1544034257.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:24:17.284Z,1544034257.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:26:17.340Z,1544034377.340 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:26:17.340Z,1544034377.340 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-05T18:26:17.340Z,1544034377.340 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:26:17.342Z,1544034377.342 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:26:17.343Z,1544034377.343 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-05T18:26:17.343Z,1544034377.343 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:26:17.356Z,1544034377.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:26:17.356Z,1544034377.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:26:17.758Z,1544034377.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:26:17.758Z,1544034377.758 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-05T18:26:17.759Z,1544034377.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:26:17.759Z,1544034377.759 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-05T18:26:18.154Z,1544034378.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:26:18.155Z,1544034378.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:26:18.155Z,1544034378.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:26:18.155Z,1544034378.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:26:18.156Z,1544034378.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:26:18.156Z,1544034378.156 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:26:26.875Z,1544034386.875 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T18:21:25.6Z 2018-12-05T18:26:26.875Z,1544034386.875 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T18:26:26.875Z,1544034386.875 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T18:26:31.853Z,1544034391.853 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0786.lzma 2018-12-05T18:26:32.632Z,1544034392.632 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0786.lzma.bak 2018-12-05T18:26:32.632Z,1544034392.632 [DataOverHttps](INFO): SBD MOMSN=8969850 2018-12-05T18:26:42.176Z,1544034402.176 [DataOverHttps](INFO): Sending 316 bytes from file Logs/20181203T211451/Express0787.lzma 2018-12-05T18:26:42.933Z,1544034402.933 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0787.lzma.bak 2018-12-05T18:26:42.933Z,1544034402.933 [DataOverHttps](INFO): SBD MOMSN=8969853 2018-12-05T18:26:44.350Z,1544034404.350 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T18:26:44.350Z,1544034404.350 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T18:26:44.350Z,1544034404.350 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T18:28:18.499Z,1544034498.499 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:28:18.499Z,1544034498.499 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-05T18:28:18.499Z,1544034498.499 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:28:18.501Z,1544034498.501 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:28:18.501Z,1544034498.501 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-05T18:28:18.501Z,1544034498.501 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:28:18.515Z,1544034498.515 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:28:18.515Z,1544034498.515 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:28:18.910Z,1544034498.910 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:28:18.911Z,1544034498.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-05T18:28:18.911Z,1544034498.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:28:18.911Z,1544034498.911 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-05T18:28:19.281Z,1544034499.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:28:19.282Z,1544034499.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:28:19.282Z,1544034499.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:28:19.283Z,1544034499.283 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:28:19.283Z,1544034499.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:28:19.283Z,1544034499.283 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:28:53.364Z,1544034533.364 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T18:29:24.115Z,1544034564.115 [NAL9602](INFO): Powering down 2018-12-05T18:30:19.382Z,1544034619.382 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:30:19.383Z,1544034619.383 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-05T18:30:19.383Z,1544034619.383 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:30:19.385Z,1544034619.385 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:30:19.385Z,1544034619.385 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-05T18:30:19.385Z,1544034619.385 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:30:19.398Z,1544034619.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:30:19.398Z,1544034619.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:30:19.802Z,1544034619.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:30:19.802Z,1544034619.802 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-05T18:30:19.803Z,1544034619.803 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:30:19.803Z,1544034619.803 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-05T18:30:20.178Z,1544034620.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:30:20.179Z,1544034620.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:30:20.179Z,1544034620.179 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:30:20.180Z,1544034620.180 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:30:20.180Z,1544034620.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:30:20.180Z,1544034620.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:31:44.498Z,1544034704.498 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T18:31:44.498Z,1544034704.498 [Default:CheckIn:C.Wait] Stopped 2018-12-05T18:31:44.498Z,1544034704.498 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T18:31:44.498Z,1544034704.498 [Default:CheckIn:D] Running Loop=1 2018-12-05T18:31:44.898Z,1544034704.898 [Default:CheckIn:D] Stopped 2018-12-05T18:31:44.898Z,1544034704.898 [Default:CheckIn:E] Running Loop=1 2018-12-05T18:31:45.294Z,1544034705.294 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2716.881250 min 2018-12-05T18:31:45.294Z,1544034705.294 [Default:CheckIn:E] Stopped 2018-12-05T18:31:45.294Z,1544034705.294 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T18:31:45.294Z,1544034705.294 [Default:CheckIn] Stopped 2018-12-05T18:31:45.294Z,1544034705.294 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T18:31:45.294Z,1544034705.294 [Default:CheckIn](INFO): Running loop #264 2018-12-05T18:31:45.294Z,1544034705.294 [Default:CheckIn] Running Loop=264 2018-12-05T18:31:45.295Z,1544034705.295 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T18:31:45.295Z,1544034705.295 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T18:31:46.064Z,1544034706.064 [NAL9602](INFO): Powering up 2018-12-05T18:31:57.264Z,1544034717.264 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:32:20.449Z,1544034740.449 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:32:20.449Z,1544034740.449 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-05T18:32:20.449Z,1544034740.449 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:32:20.451Z,1544034740.451 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:32:20.451Z,1544034740.451 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-05T18:32:20.451Z,1544034740.451 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:32:20.464Z,1544034740.464 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:32:20.465Z,1544034740.465 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:32:20.866Z,1544034740.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:32:20.866Z,1544034740.866 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-05T18:32:20.866Z,1544034740.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:32:20.866Z,1544034740.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-05T18:32:21.243Z,1544034741.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:32:21.244Z,1544034741.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:32:21.244Z,1544034741.244 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:32:21.244Z,1544034741.244 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:32:21.245Z,1544034741.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:32:21.245Z,1544034741.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:32:29.220Z,1544034749.220 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T18:32:29.302Z,1544034749.302 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T18:32:29.302Z,1544034749.302 [NAL9602] Data Fault, FailCount= 1 2018-12-05T18:32:29.302Z,1544034749.302 [NAL9602](ERROR): Data Fault 2018-12-05T18:32:29.369Z,1544034749.369 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T18:32:29.620Z,1544034749.620 [NAL9602](INFO): Powering down 2018-12-05T18:32:30.469Z,1544034750.469 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T18:32:30.469Z,1544034750.469 [NAL9602] No Fault, FailCount= 1 2018-12-05T18:32:59.994Z,1544034779.994 [NAL9602](INFO): Powering up NAL9602 2018-12-05T18:33:11.200Z,1544034791.200 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:34:21.303Z,1544034861.303 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:34:21.303Z,1544034861.303 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-05T18:34:21.303Z,1544034861.303 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:34:21.305Z,1544034861.305 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:34:21.305Z,1544034861.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-05T18:34:21.305Z,1544034861.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:34:21.347Z,1544034861.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:34:21.347Z,1544034861.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:34:21.718Z,1544034861.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:34:21.718Z,1544034861.718 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-05T18:34:21.719Z,1544034861.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:34:21.719Z,1544034861.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-05T18:34:22.114Z,1544034862.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:34:22.114Z,1544034862.114 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:34:22.115Z,1544034862.115 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:34:22.115Z,1544034862.115 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:34:22.115Z,1544034862.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:34:22.116Z,1544034862.116 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:36:22.170Z,1544034982.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:36:22.170Z,1544034982.170 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-05T18:36:22.170Z,1544034982.170 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:36:22.172Z,1544034982.172 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:36:22.172Z,1544034982.172 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-05T18:36:22.173Z,1544034982.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:36:22.243Z,1544034982.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:36:22.243Z,1544034982.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:36:22.606Z,1544034982.606 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:36:22.606Z,1544034982.606 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-05T18:36:22.607Z,1544034982.607 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:36:22.607Z,1544034982.607 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-05T18:36:22.977Z,1544034982.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:36:22.977Z,1544034982.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:36:22.977Z,1544034982.977 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:36:22.978Z,1544034982.978 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:36:22.978Z,1544034982.978 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:36:22.979Z,1544034982.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:36:46.208Z,1544035006.208 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T18:31:45.3Z 2018-12-05T18:36:46.208Z,1544035006.208 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T18:36:46.208Z,1544035006.208 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T18:36:51.193Z,1544035011.193 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0789.lzma 2018-12-05T18:36:51.975Z,1544035011.975 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0789.lzma.bak 2018-12-05T18:36:51.975Z,1544035011.975 [DataOverHttps](INFO): SBD MOMSN=8969879 2018-12-05T18:37:01.298Z,1544035021.298 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T18:37:01.398Z,1544035021.398 [DataOverHttps](INFO): Sending 327 bytes from file Logs/20181203T211451/Express0790.lzma 2018-12-05T18:37:02.183Z,1544035022.183 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0790.lzma.bak 2018-12-05T18:37:02.183Z,1544035022.183 [DataOverHttps](INFO): SBD MOMSN=8969881 2018-12-05T18:37:03.564Z,1544035023.564 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T18:37:03.564Z,1544035023.564 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T18:37:03.564Z,1544035023.564 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T18:37:31.676Z,1544035051.676 [NAL9602](INFO): Powering down 2018-12-05T18:38:23.300Z,1544035103.300 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:38:23.301Z,1544035103.301 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-05T18:38:23.301Z,1544035103.301 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:38:23.303Z,1544035103.303 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:38:23.303Z,1544035103.303 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-05T18:38:23.303Z,1544035103.303 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:38:23.317Z,1544035103.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:38:23.317Z,1544035103.317 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:38:23.713Z,1544035103.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:38:23.713Z,1544035103.713 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-05T18:38:23.714Z,1544035103.714 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:38:23.714Z,1544035103.714 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-05T18:38:24.084Z,1544035104.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:38:24.084Z,1544035104.084 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:38:24.084Z,1544035104.084 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:38:24.085Z,1544035104.085 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:38:24.085Z,1544035104.085 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:38:24.086Z,1544035104.086 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:40:24.235Z,1544035224.235 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:40:24.235Z,1544035224.235 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-05T18:40:24.235Z,1544035224.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:40:24.237Z,1544035224.237 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:40:24.237Z,1544035224.237 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-05T18:40:24.237Z,1544035224.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:40:24.250Z,1544035224.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:40:24.251Z,1544035224.251 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:40:24.662Z,1544035224.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:40:24.662Z,1544035224.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-05T18:40:24.663Z,1544035224.663 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:40:24.663Z,1544035224.663 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-05T18:40:25.042Z,1544035225.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:40:25.042Z,1544035225.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:40:25.043Z,1544035225.043 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:40:25.043Z,1544035225.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:40:25.043Z,1544035225.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:40:25.044Z,1544035225.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:42:03.864Z,1544035323.864 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T18:42:03.864Z,1544035323.864 [Default:CheckIn:C.Wait] Stopped 2018-12-05T18:42:03.864Z,1544035323.864 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T18:42:03.865Z,1544035323.865 [Default:CheckIn:D] Running Loop=1 2018-12-05T18:42:04.266Z,1544035324.266 [Default:CheckIn:D] Stopped 2018-12-05T18:42:04.266Z,1544035324.266 [Default:CheckIn:E] Running Loop=1 2018-12-05T18:42:04.664Z,1544035324.664 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2727.204167 min 2018-12-05T18:42:04.664Z,1544035324.664 [Default:CheckIn:E] Stopped 2018-12-05T18:42:04.664Z,1544035324.664 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T18:42:04.665Z,1544035324.665 [Default:CheckIn] Stopped 2018-12-05T18:42:04.665Z,1544035324.665 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T18:42:04.665Z,1544035324.665 [Default:CheckIn](INFO): Running loop #265 2018-12-05T18:42:04.665Z,1544035324.665 [Default:CheckIn] Running Loop=265 2018-12-05T18:42:04.665Z,1544035324.665 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T18:42:04.665Z,1544035324.665 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T18:42:05.436Z,1544035325.436 [NAL9602](INFO): Powering up 2018-12-05T18:42:16.636Z,1544035336.636 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:42:17.436Z,1544035337.436 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T18:42:17.436Z,1544035337.436 [NAL9602] Data Fault, FailCount= 2 2018-12-05T18:42:17.436Z,1544035337.436 [NAL9602](ERROR): Data Fault 2018-12-05T18:42:17.509Z,1544035337.509 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T18:42:17.836Z,1544035337.836 [NAL9602](INFO): Powering down 2018-12-05T18:42:18.680Z,1544035338.680 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T18:42:18.680Z,1544035338.680 [NAL9602] No Fault, FailCount= 2 2018-12-05T18:42:25.082Z,1544035345.082 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:42:25.082Z,1544035345.082 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-05T18:42:25.082Z,1544035345.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:42:25.084Z,1544035345.084 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:42:25.084Z,1544035345.084 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-05T18:42:25.085Z,1544035345.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:42:25.098Z,1544035345.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:42:25.098Z,1544035345.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:42:25.490Z,1544035345.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:42:25.490Z,1544035345.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-05T18:42:25.491Z,1544035345.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:42:25.491Z,1544035345.491 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-05T18:42:25.883Z,1544035345.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:42:25.883Z,1544035345.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:42:25.883Z,1544035345.883 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:42:25.884Z,1544035345.884 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:42:25.884Z,1544035345.884 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:42:25.885Z,1544035345.885 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:42:47.856Z,1544035367.856 [NAL9602](INFO): Powering up NAL9602 2018-12-05T18:42:59.868Z,1544035379.868 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:44:26.219Z,1544035466.219 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:44:26.219Z,1544035466.219 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-05T18:44:26.219Z,1544035466.219 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:44:26.221Z,1544035466.221 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:44:26.222Z,1544035466.222 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-05T18:44:26.222Z,1544035466.222 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:44:26.235Z,1544035466.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:44:26.235Z,1544035466.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:44:26.630Z,1544035466.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:44:26.631Z,1544035466.631 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-05T18:44:26.631Z,1544035466.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:44:26.631Z,1544035466.631 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-05T18:44:27.021Z,1544035467.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:44:27.022Z,1544035467.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:44:27.022Z,1544035467.022 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:44:27.023Z,1544035467.023 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:44:27.023Z,1544035467.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:44:27.024Z,1544035467.024 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:46:27.234Z,1544035587.234 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:46:27.234Z,1544035587.234 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-05T18:46:27.235Z,1544035587.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:46:27.237Z,1544035587.237 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:46:27.237Z,1544035587.237 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-05T18:46:27.237Z,1544035587.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:46:27.250Z,1544035587.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:46:27.251Z,1544035587.251 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:46:27.658Z,1544035587.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T18:46:27.658Z,1544035587.658 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-05T18:46:27.659Z,1544035587.659 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T18:46:27.659Z,1544035587.659 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-05T18:46:30.707Z,1544035590.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T18:46:30.708Z,1544035590.708 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:46:30.708Z,1544035590.708 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:46:30.708Z,1544035590.708 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T18:46:30.709Z,1544035590.709 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T18:46:30.709Z,1544035590.709 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T18:47:05.930Z,1544035625.930 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T18:42:04.7Z 2018-12-05T18:47:05.931Z,1544035625.931 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T18:47:05.931Z,1544035625.931 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T18:47:11.048Z,1544035631.048 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0792.lzma 2018-12-05T18:47:11.849Z,1544035631.849 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0792.lzma.bak 2018-12-05T18:47:11.850Z,1544035631.850 [DataOverHttps](INFO): SBD MOMSN=8969903 2018-12-05T18:47:21.203Z,1544035641.203 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20181203T211451/Express0793.lzma 2018-12-05T18:47:21.993Z,1544035641.993 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0793.lzma.bak 2018-12-05T18:47:21.994Z,1544035641.994 [DataOverHttps](INFO): SBD MOMSN=8969905 2018-12-05T18:47:23.357Z,1544035643.357 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T18:47:23.357Z,1544035643.357 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T18:47:23.357Z,1544035643.357 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T18:48:03.232Z,1544035683.232 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T18:48:30.847Z,1544035710.847 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:48:30.847Z,1544035710.847 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-05T18:48:30.847Z,1544035710.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T18:48:30.849Z,1544035710.849 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T18:48:30.849Z,1544035710.849 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-05T18:48:30.849Z,1544035710.849 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T18:48:30.894Z,1544035710.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:48:30.894Z,1544035710.894 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T18:48:30.895Z,1544035710.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:48:30.895Z,1544035710.895 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T18:48:33.628Z,1544035713.628 [NAL9602](INFO): Powering down 2018-12-05T18:52:23.693Z,1544035943.693 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T18:52:23.694Z,1544035943.694 [Default:CheckIn:C.Wait] Stopped 2018-12-05T18:52:23.694Z,1544035943.694 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T18:52:23.694Z,1544035943.694 [Default:CheckIn:D] Running Loop=1 2018-12-05T18:52:24.099Z,1544035944.099 [Default:CheckIn:D] Stopped 2018-12-05T18:52:24.099Z,1544035944.099 [Default:CheckIn:E] Running Loop=1 2018-12-05T18:52:24.492Z,1544035944.492 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2737.534635 min 2018-12-05T18:52:24.493Z,1544035944.493 [Default:CheckIn:E] Stopped 2018-12-05T18:52:24.493Z,1544035944.493 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T18:52:24.493Z,1544035944.493 [Default:CheckIn] Stopped 2018-12-05T18:52:24.493Z,1544035944.493 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T18:52:24.493Z,1544035944.493 [Default:CheckIn](INFO): Running loop #266 2018-12-05T18:52:24.493Z,1544035944.493 [Default:CheckIn] Running Loop=266 2018-12-05T18:52:24.493Z,1544035944.493 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T18:52:24.493Z,1544035944.493 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T18:52:25.272Z,1544035945.272 [NAL9602](INFO): Powering up 2018-12-05T18:52:33.668Z,1544035953.668 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T18:52:33.668Z,1544035953.668 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T18:52:33.668Z,1544035953.668 [DropWeight](ERROR): Hardware Fault 2018-12-05T18:52:33.728Z,1544035953.728 [CBIT](INFO): Critical error at 20181205T185233 2018-12-05T18:52:33.755Z,1544035953.755 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T18:52:33.755Z,1544035953.755 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T18:52:34.102Z,1544035954.102 [CBIT](INFO): Critical error at 20181205T185233 2018-12-05T18:52:36.468Z,1544035956.468 [NAL9602](INFO): NAL9602 initialized 2018-12-05T18:57:25.623Z,1544036245.623 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T18:52:24.5Z 2018-12-05T18:57:25.624Z,1544036245.624 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T18:57:25.624Z,1544036245.624 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T18:57:30.589Z,1544036250.589 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0795.lzma 2018-12-05T18:57:31.385Z,1544036251.385 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0795.lzma.bak 2018-12-05T18:57:31.385Z,1544036251.385 [DataOverHttps](INFO): SBD MOMSN=8969927 2018-12-05T18:57:40.909Z,1544036260.909 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T18:57:40.989Z,1544036260.989 [DataOverHttps](INFO): Sending 325 bytes from file Logs/20181203T211451/Express0796.lzma 2018-12-05T18:57:41.790Z,1544036261.790 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0796.lzma.bak 2018-12-05T18:57:41.795Z,1544036261.795 [DataOverHttps](INFO): SBD MOMSN=8969931 2018-12-05T18:57:43.141Z,1544036263.141 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T18:57:43.141Z,1544036263.141 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T18:57:43.141Z,1544036263.141 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T18:58:11.135Z,1544036291.135 [NAL9602](INFO): Powering down 2018-12-05T19:02:43.334Z,1544036563.334 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T19:02:43.334Z,1544036563.334 [Default:CheckIn:C.Wait] Stopped 2018-12-05T19:02:43.341Z,1544036563.341 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T19:02:43.341Z,1544036563.341 [Default:CheckIn:D] Running Loop=1 2018-12-05T19:02:43.733Z,1544036563.733 [Default:CheckIn:D] Stopped 2018-12-05T19:02:43.733Z,1544036563.733 [Default:CheckIn:E] Running Loop=1 2018-12-05T19:02:44.121Z,1544036564.121 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2747.861979 min 2018-12-05T19:02:44.122Z,1544036564.122 [Default:CheckIn:E] Stopped 2018-12-05T19:02:44.122Z,1544036564.122 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T19:02:44.122Z,1544036564.122 [Default:CheckIn] Stopped 2018-12-05T19:02:44.122Z,1544036564.122 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T19:02:44.136Z,1544036564.136 [Default:CheckIn](INFO): Running loop #267 2018-12-05T19:02:44.136Z,1544036564.136 [Default:CheckIn] Running Loop=267 2018-12-05T19:02:44.136Z,1544036564.136 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T19:02:44.136Z,1544036564.136 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T19:02:44.903Z,1544036564.903 [NAL9602](INFO): Powering up 2018-12-05T19:02:55.711Z,1544036575.711 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:02:56.502Z,1544036576.502 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T19:02:56.502Z,1544036576.502 [NAL9602] Data Fault, FailCount= 3 2018-12-05T19:02:56.502Z,1544036576.502 [NAL9602](ERROR): Data Fault 2018-12-05T19:02:56.563Z,1544036576.563 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T19:02:56.908Z,1544036576.908 [NAL9602](INFO): Powering down 2018-12-05T19:02:57.747Z,1544036577.747 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T19:02:57.747Z,1544036577.747 [NAL9602] No Fault, FailCount= 3 2018-12-05T19:03:26.976Z,1544036606.976 [NAL9602](INFO): Powering up NAL9602 2018-12-05T19:03:31.055Z,1544036611.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:03:31.055Z,1544036611.055 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-05T19:03:31.055Z,1544036611.055 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:03:31.055Z,1544036611.055 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-05T19:03:31.398Z,1544036611.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:03:31.398Z,1544036611.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:03:31.399Z,1544036611.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:03:31.399Z,1544036611.399 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:03:31.400Z,1544036611.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:03:31.400Z,1544036611.400 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:03:39.363Z,1544036619.363 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:05:31.683Z,1544036731.683 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:05:31.683Z,1544036731.683 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-05T19:05:31.683Z,1544036731.683 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:05:31.685Z,1544036731.685 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:05:31.685Z,1544036731.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-05T19:05:31.685Z,1544036731.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:05:31.720Z,1544036731.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:05:31.720Z,1544036731.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:05:32.125Z,1544036732.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:05:32.125Z,1544036732.125 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-05T19:05:32.125Z,1544036732.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:05:32.125Z,1544036732.125 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-05T19:05:32.490Z,1544036732.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:05:32.490Z,1544036732.490 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:05:32.491Z,1544036732.491 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:05:32.491Z,1544036732.491 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:05:32.491Z,1544036732.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:05:32.492Z,1544036732.492 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:07:32.646Z,1544036852.646 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:07:32.646Z,1544036852.646 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-05T19:07:32.646Z,1544036852.646 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:07:32.648Z,1544036852.648 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:07:32.648Z,1544036852.648 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-05T19:07:32.649Z,1544036852.649 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:07:32.662Z,1544036852.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:07:32.662Z,1544036852.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:07:33.054Z,1544036853.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:07:33.054Z,1544036853.054 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-05T19:07:33.054Z,1544036853.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:07:33.055Z,1544036853.055 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-05T19:07:33.441Z,1544036853.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:07:33.442Z,1544036853.442 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:07:33.443Z,1544036853.443 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:07:33.443Z,1544036853.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:07:33.443Z,1544036853.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:07:33.444Z,1544036853.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:07:33.856Z,1544036853.856 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T19:07:33.856Z,1544036853.856 [DropWeight] No Fault, FailCount= 1 2018-12-05T19:07:45.344Z,1544036865.344 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T19:02:44.1Z 2018-12-05T19:07:45.344Z,1544036865.344 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T19:07:45.344Z,1544036865.344 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T19:07:50.275Z,1544036870.275 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0798.lzma 2018-12-05T19:07:51.077Z,1544036871.077 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0798.lzma.bak 2018-12-05T19:07:51.077Z,1544036871.077 [DataOverHttps](INFO): SBD MOMSN=8969948 2018-12-05T19:08:00.716Z,1544036880.716 [DataOverHttps](INFO): Sending 278 bytes from file Logs/20181203T211451/Express0799.lzma 2018-12-05T19:08:01.485Z,1544036881.485 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0799.lzma.bak 2018-12-05T19:08:01.485Z,1544036881.485 [DataOverHttps](INFO): SBD MOMSN=8969950 2018-12-05T19:08:02.870Z,1544036882.870 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T19:08:02.870Z,1544036882.870 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T19:08:02.870Z,1544036882.870 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T19:08:42.269Z,1544036922.269 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T19:09:12.816Z,1544036952.816 [NAL9602](INFO): Powering down 2018-12-05T19:09:33.658Z,1544036973.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:09:33.658Z,1544036973.658 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-05T19:09:33.658Z,1544036973.658 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:09:33.660Z,1544036973.660 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:09:33.660Z,1544036973.660 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-05T19:09:33.661Z,1544036973.661 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:09:33.674Z,1544036973.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:09:33.674Z,1544036973.674 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:09:34.070Z,1544036974.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:09:34.070Z,1544036974.070 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-05T19:09:34.070Z,1544036974.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:09:34.070Z,1544036974.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-05T19:09:34.450Z,1544036974.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:09:34.450Z,1544036974.450 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:09:34.451Z,1544036974.451 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:09:34.451Z,1544036974.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:09:34.452Z,1544036974.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:09:34.452Z,1544036974.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:11:37.634Z,1544037097.634 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:11:37.634Z,1544037097.634 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-05T19:11:37.634Z,1544037097.634 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:11:37.636Z,1544037097.636 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:11:37.637Z,1544037097.637 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-05T19:11:37.637Z,1544037097.637 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:11:37.650Z,1544037097.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:11:37.650Z,1544037097.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:11:37.762Z,1544037097.762 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:11:37.762Z,1544037097.762 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-05T19:11:37.763Z,1544037097.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:11:37.763Z,1544037097.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-05T19:11:38.094Z,1544037098.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:11:38.094Z,1544037098.094 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:11:38.095Z,1544037098.095 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:11:38.095Z,1544037098.095 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:11:38.095Z,1544037098.095 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:11:38.096Z,1544037098.096 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:13:03.102Z,1544037183.102 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T19:13:03.102Z,1544037183.102 [Default:CheckIn:C.Wait] Stopped 2018-12-05T19:13:03.102Z,1544037183.102 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T19:13:03.102Z,1544037183.102 [Default:CheckIn:D] Running Loop=1 2018-12-05T19:13:03.504Z,1544037183.504 [Default:CheckIn:D] Stopped 2018-12-05T19:13:03.504Z,1544037183.504 [Default:CheckIn:E] Running Loop=1 2018-12-05T19:13:03.904Z,1544037183.904 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2758.191406 min 2018-12-05T19:13:03.904Z,1544037183.904 [Default:CheckIn:E] Stopped 2018-12-05T19:13:03.904Z,1544037183.904 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T19:13:03.904Z,1544037183.904 [Default:CheckIn] Stopped 2018-12-05T19:13:03.904Z,1544037183.904 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T19:13:03.905Z,1544037183.905 [Default:CheckIn](INFO): Running loop #268 2018-12-05T19:13:03.905Z,1544037183.905 [Default:CheckIn] Running Loop=268 2018-12-05T19:13:03.905Z,1544037183.905 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T19:13:03.905Z,1544037183.905 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T19:13:04.663Z,1544037184.663 [NAL9602](INFO): Powering up 2018-12-05T19:13:15.864Z,1544037195.864 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:13:38.259Z,1544037218.259 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:13:38.259Z,1544037218.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5 2018-12-05T19:13:38.259Z,1544037218.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:13:38.261Z,1544037218.261 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:13:38.261Z,1544037218.261 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5 2018-12-05T19:13:38.261Z,1544037218.261 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:13:38.275Z,1544037218.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:13:38.275Z,1544037218.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:13:38.674Z,1544037218.674 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:13:38.675Z,1544037218.675 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5 2018-12-05T19:13:38.675Z,1544037218.675 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:13:38.676Z,1544037218.676 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5 2018-12-05T19:13:39.061Z,1544037219.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:13:39.061Z,1544037219.061 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:13:39.062Z,1544037219.062 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:13:39.062Z,1544037219.062 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:13:39.063Z,1544037219.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:13:39.063Z,1544037219.063 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:13:47.828Z,1544037227.829 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T19:13:47.910Z,1544037227.910 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T19:13:47.910Z,1544037227.910 [NAL9602] Data Fault, FailCount= 4 2018-12-05T19:13:47.910Z,1544037227.910 [NAL9602](ERROR): Data Fault 2018-12-05T19:13:47.949Z,1544037227.949 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T19:13:48.232Z,1544037228.232 [NAL9602](INFO): Powering down 2018-12-05T19:13:49.082Z,1544037229.082 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T19:13:49.082Z,1544037229.082 [NAL9602] No Fault, FailCount= 4 2018-12-05T19:14:18.600Z,1544037258.600 [NAL9602](INFO): Powering up NAL9602 2018-12-05T19:14:29.800Z,1544037269.800 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:14:30.608Z,1544037270.608 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T19:14:30.608Z,1544037270.608 [NAL9602] Data Fault, FailCount= 5 2018-12-05T19:14:30.608Z,1544037270.608 [NAL9602](ERROR): Data Fault 2018-12-05T19:14:30.690Z,1544037270.690 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T19:14:30.691Z,1544037270.691 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T19:14:33.715Z,1544037273.715 [NAL9602](INFO): Powering down 2018-12-05T19:14:33.810Z,1544037273.810 [CBIT](INFO): Critical error at 20181205T191430 2018-12-05T19:15:39.445Z,1544037339.445 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:15:39.445Z,1544037339.445 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6 2018-12-05T19:15:39.445Z,1544037339.445 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:15:39.448Z,1544037339.448 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:15:39.448Z,1544037339.448 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6 2018-12-05T19:15:39.448Z,1544037339.448 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:15:39.461Z,1544037339.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:15:39.462Z,1544037339.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:15:39.861Z,1544037339.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:15:39.861Z,1544037339.861 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6 2018-12-05T19:15:39.862Z,1544037339.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:15:39.862Z,1544037339.862 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6 2018-12-05T19:15:40.238Z,1544037340.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:15:40.253Z,1544037340.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:15:40.253Z,1544037340.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:15:40.253Z,1544037340.253 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:15:40.254Z,1544037340.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:15:40.254Z,1544037340.254 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:16:30.721Z,1544037390.721 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T19:16:30.721Z,1544037390.721 [NAL9602] No Fault, FailCount= 5 2018-12-05T19:16:31.072Z,1544037391.072 [NAL9602](INFO): Powering up NAL9602 2018-12-05T19:16:41.872Z,1544037401.872 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:17:40.418Z,1544037460.418 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:17:40.418Z,1544037460.418 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7 2018-12-05T19:17:40.418Z,1544037460.418 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:17:40.420Z,1544037460.420 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:17:40.420Z,1544037460.420 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7 2018-12-05T19:17:40.420Z,1544037460.420 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:17:40.434Z,1544037460.434 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:17:40.434Z,1544037460.434 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:17:40.834Z,1544037460.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:17:40.834Z,1544037460.834 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7 2018-12-05T19:17:40.835Z,1544037460.835 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:17:40.835Z,1544037460.835 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7 2018-12-05T19:17:41.222Z,1544037461.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:17:41.222Z,1544037461.222 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:17:41.223Z,1544037461.223 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:17:41.223Z,1544037461.223 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:17:41.223Z,1544037461.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:17:41.224Z,1544037461.224 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:18:05.136Z,1544037485.136 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T19:13:03.9Z 2018-12-05T19:18:05.136Z,1544037485.136 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T19:18:05.137Z,1544037485.137 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T19:18:10.147Z,1544037490.147 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0801.lzma 2018-12-05T19:18:10.946Z,1544037490.946 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0801.lzma.bak 2018-12-05T19:18:10.947Z,1544037490.947 [DataOverHttps](INFO): SBD MOMSN=8969966 2018-12-05T19:18:20.540Z,1544037500.540 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T19:18:20.628Z,1544037500.628 [DataOverHttps](INFO): Sending 343 bytes from file Logs/20181203T211451/Express0802.lzma 2018-12-05T19:18:21.409Z,1544037501.409 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0802.lzma.bak 2018-12-05T19:18:21.409Z,1544037501.409 [DataOverHttps](INFO): SBD MOMSN=8969969 2018-12-05T19:18:22.880Z,1544037502.880 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T19:18:22.880Z,1544037502.880 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T19:18:22.880Z,1544037502.880 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T19:18:28.549Z,1544037508.549 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T19:18:50.915Z,1544037530.915 [NAL9602](INFO): Powering down 2018-12-05T19:19:41.238Z,1544037581.238 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:19:41.239Z,1544037581.239 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8 2018-12-05T19:19:41.239Z,1544037581.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:19:41.241Z,1544037581.241 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:19:41.241Z,1544037581.241 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8 2018-12-05T19:19:41.241Z,1544037581.241 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:19:41.254Z,1544037581.254 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:19:41.255Z,1544037581.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:19:41.649Z,1544037581.649 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:19:41.649Z,1544037581.649 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8 2018-12-05T19:19:41.650Z,1544037581.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:19:41.650Z,1544037581.650 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8 2018-12-05T19:19:42.038Z,1544037582.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:19:42.038Z,1544037582.038 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:19:42.039Z,1544037582.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:19:42.039Z,1544037582.039 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:19:42.039Z,1544037582.039 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:19:42.040Z,1544037582.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:21:42.069Z,1544037702.069 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:21:42.069Z,1544037702.069 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9 2018-12-05T19:21:42.069Z,1544037702.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:21:42.071Z,1544037702.071 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:21:42.071Z,1544037702.071 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9 2018-12-05T19:21:42.071Z,1544037702.071 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:21:42.084Z,1544037702.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:21:42.084Z,1544037702.084 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:21:42.482Z,1544037702.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:21:42.482Z,1544037702.482 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9 2018-12-05T19:21:42.483Z,1544037702.483 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:21:42.483Z,1544037702.483 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9 2018-12-05T19:21:42.865Z,1544037702.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:21:42.866Z,1544037702.866 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:21:42.866Z,1544037702.866 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:21:42.867Z,1544037702.867 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:21:42.867Z,1544037702.867 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:21:42.867Z,1544037702.867 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:23:23.149Z,1544037803.149 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T19:23:23.149Z,1544037803.149 [Default:CheckIn:C.Wait] Stopped 2018-12-05T19:23:23.149Z,1544037803.149 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T19:23:23.149Z,1544037803.149 [Default:CheckIn:D] Running Loop=1 2018-12-05T19:23:23.548Z,1544037803.548 [Default:CheckIn:D] Stopped 2018-12-05T19:23:23.548Z,1544037803.548 [Default:CheckIn:E] Running Loop=1 2018-12-05T19:23:23.948Z,1544037803.948 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2768.525521 min 2018-12-05T19:23:23.948Z,1544037803.948 [Default:CheckIn:E] Stopped 2018-12-05T19:23:23.948Z,1544037803.948 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T19:23:23.948Z,1544037803.948 [Default:CheckIn] Stopped 2018-12-05T19:23:23.948Z,1544037803.948 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T19:23:23.949Z,1544037803.949 [Default:CheckIn](INFO): Running loop #269 2018-12-05T19:23:23.949Z,1544037803.949 [Default:CheckIn] Running Loop=269 2018-12-05T19:23:23.949Z,1544037803.949 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T19:23:23.949Z,1544037803.949 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T19:23:24.719Z,1544037804.719 [NAL9602](INFO): Powering up 2018-12-05T19:23:35.920Z,1544037815.920 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:23:43.200Z,1544037823.200 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:23:43.200Z,1544037823.200 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10 2018-12-05T19:23:43.200Z,1544037823.200 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:23:43.202Z,1544037823.202 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:23:43.238Z,1544037823.238 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10 2018-12-05T19:23:43.238Z,1544037823.238 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:23:43.267Z,1544037823.267 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:23:43.267Z,1544037823.267 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:23:43.351Z,1544037823.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:23:43.351Z,1544037823.351 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10 2018-12-05T19:23:43.352Z,1544037823.352 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:23:43.352Z,1544037823.352 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10 2018-12-05T19:23:43.706Z,1544037823.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:23:43.721Z,1544037823.721 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:23:43.722Z,1544037823.722 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:23:43.722Z,1544037823.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:23:43.723Z,1544037823.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:23:43.723Z,1544037823.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:24:07.680Z,1544037847.680 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T19:24:07.754Z,1544037847.754 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T19:24:07.754Z,1544037847.754 [NAL9602] Data Fault, FailCount= 1 2018-12-05T19:24:07.754Z,1544037847.754 [NAL9602](ERROR): Data Fault 2018-12-05T19:24:07.828Z,1544037847.828 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T19:24:08.080Z,1544037848.080 [NAL9602](INFO): Powering down 2018-12-05T19:24:08.912Z,1544037848.912 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T19:24:08.912Z,1544037848.912 [NAL9602] No Fault, FailCount= 1 2018-12-05T19:24:38.108Z,1544037878.108 [NAL9602](INFO): Powering up NAL9602 2018-12-05T19:24:49.308Z,1544037889.308 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:25:43.778Z,1544037943.778 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:25:43.779Z,1544037943.779 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11 2018-12-05T19:25:43.779Z,1544037943.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:25:43.781Z,1544037943.781 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:25:43.781Z,1544037943.781 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11 2018-12-05T19:25:43.781Z,1544037943.781 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:25:43.795Z,1544037943.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:25:43.795Z,1544037943.795 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:25:44.202Z,1544037944.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:25:44.202Z,1544037944.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11 2018-12-05T19:25:44.203Z,1544037944.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:25:44.203Z,1544037944.203 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11 2018-12-05T19:25:44.578Z,1544037944.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:25:44.583Z,1544037944.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:25:44.583Z,1544037944.583 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:25:44.583Z,1544037944.583 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:25:44.584Z,1544037944.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:25:44.584Z,1544037944.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:27:44.858Z,1544038064.858 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:27:44.858Z,1544038064.858 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12 2018-12-05T19:27:44.858Z,1544038064.858 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:27:44.861Z,1544038064.861 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:27:44.861Z,1544038064.861 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12 2018-12-05T19:27:44.861Z,1544038064.861 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:27:44.895Z,1544038064.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:27:44.895Z,1544038064.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:27:45.303Z,1544038065.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:27:45.303Z,1544038065.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12 2018-12-05T19:27:45.304Z,1544038065.304 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:27:45.304Z,1544038065.304 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12 2018-12-05T19:27:45.659Z,1544038065.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:27:45.659Z,1544038065.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:27:45.659Z,1544038065.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:27:45.660Z,1544038065.660 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:27:45.660Z,1544038065.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:27:45.661Z,1544038065.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:28:25.069Z,1544038105.069 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T19:23:23.9Z 2018-12-05T19:28:25.069Z,1544038105.069 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T19:28:25.069Z,1544038105.069 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T19:28:30.094Z,1544038110.094 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0804.lzma 2018-12-05T19:28:30.889Z,1544038110.889 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0804.lzma.bak 2018-12-05T19:28:30.889Z,1544038110.889 [DataOverHttps](INFO): SBD MOMSN=8969992 2018-12-05T19:28:40.429Z,1544038120.429 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T19:28:40.496Z,1544038120.496 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0805.lzma 2018-12-05T19:28:41.297Z,1544038121.297 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0805.lzma.bak 2018-12-05T19:28:41.297Z,1544038121.297 [DataOverHttps](INFO): SBD MOMSN=8969994 2018-12-05T19:28:42.673Z,1544038122.673 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T19:28:42.673Z,1544038122.673 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T19:28:42.673Z,1544038122.673 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T19:29:10.649Z,1544038150.649 [NAL9602](INFO): Powering down 2018-12-05T19:29:41.041Z,1544038181.041 [CBIT](IMPORTANT): Beginning ground fault scan 2018-12-05T19:29:45.812Z,1544038185.812 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:29:45.812Z,1544038185.812 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13 2018-12-05T19:29:45.812Z,1544038185.812 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:29:45.815Z,1544038185.815 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:29:45.815Z,1544038185.815 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13 2018-12-05T19:29:45.815Z,1544038185.815 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:29:45.854Z,1544038185.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:29:45.855Z,1544038185.855 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:29:46.248Z,1544038186.248 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:29:46.248Z,1544038186.248 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13 2018-12-05T19:29:46.249Z,1544038186.249 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:29:46.249Z,1544038186.249 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13 2018-12-05T19:29:46.618Z,1544038186.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:29:46.618Z,1544038186.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:29:46.619Z,1544038186.619 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:29:46.619Z,1544038186.619 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:29:46.620Z,1544038186.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:29:46.620Z,1544038186.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:29:51.834Z,1544038191.834 [CBIT](IMPORTANT): Ground fault detected mA: CHAN A0 (Batt): 0.144585 CHAN A1 (24V): 0.000494 CHAN A2 (12V): -0.004882 CHAN A3 (5V): -0.002793 CHAN B0 (3.3V): -0.001242 CHAN B1 (3.15aV): -0.001252 CHAN B2 (3.15bV): -0.001087 CHAN B3 (GND): -0.000536 OPEN: -0.001185 Full Scale Calc: 4.765 mA, -1.589 mA 2018-12-05T19:31:46.794Z,1544038306.794 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:31:46.794Z,1544038306.794 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14 2018-12-05T19:31:46.794Z,1544038306.794 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:31:46.796Z,1544038306.796 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:31:46.796Z,1544038306.796 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14 2018-12-05T19:31:46.796Z,1544038306.796 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:31:46.809Z,1544038306.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:31:46.809Z,1544038306.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:31:47.208Z,1544038307.208 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:31:47.209Z,1544038307.209 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14 2018-12-05T19:31:47.209Z,1544038307.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:31:47.209Z,1544038307.209 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14 2018-12-05T19:31:47.606Z,1544038307.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:31:47.607Z,1544038307.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:31:47.607Z,1544038307.607 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:31:47.607Z,1544038307.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:31:47.608Z,1544038307.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:31:47.608Z,1544038307.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:33:42.898Z,1544038422.898 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T19:33:42.898Z,1544038422.898 [Default:CheckIn:C.Wait] Stopped 2018-12-05T19:33:42.898Z,1544038422.898 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T19:33:42.898Z,1544038422.898 [Default:CheckIn:D] Running Loop=1 2018-12-05T19:33:43.298Z,1544038423.298 [Default:CheckIn:D] Stopped 2018-12-05T19:33:43.298Z,1544038423.298 [Default:CheckIn:E] Running Loop=1 2018-12-05T19:33:43.693Z,1544038423.693 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2778.854688 min 2018-12-05T19:33:43.694Z,1544038423.694 [Default:CheckIn:E] Stopped 2018-12-05T19:33:43.694Z,1544038423.694 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T19:33:43.694Z,1544038423.694 [Default:CheckIn] Stopped 2018-12-05T19:33:43.694Z,1544038423.694 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T19:33:43.694Z,1544038423.694 [Default:CheckIn](INFO): Running loop #270 2018-12-05T19:33:43.694Z,1544038423.694 [Default:CheckIn] Running Loop=270 2018-12-05T19:33:43.694Z,1544038423.694 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T19:33:43.695Z,1544038423.695 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T19:33:44.461Z,1544038424.461 [NAL9602](INFO): Powering up 2018-12-05T19:33:47.686Z,1544038427.686 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:33:47.686Z,1544038427.686 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15 2018-12-05T19:33:47.686Z,1544038427.686 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:33:47.688Z,1544038427.688 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:33:47.688Z,1544038427.688 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15 2018-12-05T19:33:47.688Z,1544038427.688 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:33:47.732Z,1544038427.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:33:47.732Z,1544038427.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:33:48.125Z,1544038428.125 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:33:48.125Z,1544038428.125 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15 2018-12-05T19:33:48.126Z,1544038428.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:33:48.126Z,1544038428.126 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15 2018-12-05T19:33:48.480Z,1544038428.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:33:48.481Z,1544038428.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:33:48.481Z,1544038428.481 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:33:48.481Z,1544038428.481 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:33:48.482Z,1544038428.482 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:33:48.482Z,1544038428.482 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:33:55.264Z,1544038435.264 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:33:56.068Z,1544038436.068 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T19:33:56.068Z,1544038436.068 [NAL9602] Data Fault, FailCount= 2 2018-12-05T19:33:56.068Z,1544038436.068 [NAL9602](ERROR): Data Fault 2018-12-05T19:33:56.127Z,1544038436.127 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T19:33:56.463Z,1544038436.463 [NAL9602](INFO): Powering down 2018-12-05T19:33:57.303Z,1544038437.303 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T19:33:57.303Z,1544038437.303 [NAL9602] No Fault, FailCount= 2 2018-12-05T19:34:26.512Z,1544038466.512 [NAL9602](INFO): Powering up NAL9602 2018-12-05T19:34:38.860Z,1544038478.860 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:35:48.762Z,1544038548.762 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:35:48.763Z,1544038548.763 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16 2018-12-05T19:35:48.763Z,1544038548.763 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:35:48.765Z,1544038548.765 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:35:48.765Z,1544038548.765 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16 2018-12-05T19:35:48.765Z,1544038548.765 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:35:48.803Z,1544038548.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:35:48.803Z,1544038548.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:35:48.903Z,1544038548.903 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:35:48.903Z,1544038548.903 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16 2018-12-05T19:35:48.904Z,1544038548.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:35:48.904Z,1544038548.904 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16 2018-12-05T19:35:49.242Z,1544038549.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:35:49.256Z,1544038549.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:35:49.256Z,1544038549.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:35:49.257Z,1544038549.257 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:35:49.257Z,1544038549.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:35:49.257Z,1544038549.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:37:35.035Z,1544038655.035 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T19:37:35.036Z,1544038655.036 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T19:37:35.036Z,1544038655.036 [DropWeight](ERROR): Hardware Fault 2018-12-05T19:37:35.108Z,1544038655.108 [CBIT](INFO): Critical error at 20181205T193735 2018-12-05T19:37:35.111Z,1544038655.111 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T19:37:35.111Z,1544038655.111 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T19:37:35.483Z,1544038655.483 [CBIT](INFO): Critical error at 20181205T193735 2018-12-05T19:37:49.455Z,1544038669.455 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:37:49.455Z,1544038669.455 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17 2018-12-05T19:37:49.455Z,1544038669.455 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:37:49.457Z,1544038669.457 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:37:49.457Z,1544038669.457 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17 2018-12-05T19:37:49.457Z,1544038669.457 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:37:49.500Z,1544038669.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:37:49.500Z,1544038669.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:37:49.901Z,1544038669.901 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:37:49.902Z,1544038669.902 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17 2018-12-05T19:37:49.902Z,1544038669.902 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:37:49.902Z,1544038669.902 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17 2018-12-05T19:37:50.270Z,1544038670.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:37:50.283Z,1544038670.283 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:37:50.284Z,1544038670.284 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:37:50.284Z,1544038670.284 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:37:50.284Z,1544038670.284 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:37:50.285Z,1544038670.285 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:38:44.914Z,1544038724.914 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T19:33:43.7Z 2018-12-05T19:38:44.914Z,1544038724.914 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T19:38:44.915Z,1544038724.915 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T19:38:49.881Z,1544038729.881 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0807.lzma 2018-12-05T19:38:50.681Z,1544038730.681 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0807.lzma.bak 2018-12-05T19:38:50.682Z,1544038730.682 [DataOverHttps](INFO): SBD MOMSN=8970017 2018-12-05T19:39:00.128Z,1544038740.128 [DataOverHttps](INFO): Sending 490 bytes from file Logs/20181203T211451/Express0808.lzma 2018-12-05T19:39:00.909Z,1544038740.909 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0808.lzma.bak 2018-12-05T19:39:00.909Z,1544038740.909 [DataOverHttps](INFO): SBD MOMSN=8970021 2018-12-05T19:39:02.378Z,1544038742.378 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T19:39:02.378Z,1544038742.378 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T19:39:02.378Z,1544038742.378 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T19:39:41.658Z,1544038781.658 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T19:39:50.478Z,1544038790.478 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:39:50.478Z,1544038790.478 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18 2018-12-05T19:39:50.478Z,1544038790.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:39:50.480Z,1544038790.480 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:39:50.480Z,1544038790.480 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18 2018-12-05T19:39:50.480Z,1544038790.480 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:39:50.494Z,1544038790.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:39:50.494Z,1544038790.494 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:39:50.899Z,1544038790.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:39:50.899Z,1544038790.899 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18 2018-12-05T19:39:50.900Z,1544038790.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:39:50.900Z,1544038790.900 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18 2018-12-05T19:39:51.286Z,1544038791.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:39:51.287Z,1544038791.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:39:51.287Z,1544038791.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:39:51.287Z,1544038791.287 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:39:51.288Z,1544038791.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:39:51.288Z,1544038791.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:40:12.453Z,1544038812.453 [NAL9602](INFO): Powering down 2018-12-05T19:41:51.662Z,1544038911.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:41:51.662Z,1544038911.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19 2018-12-05T19:41:51.662Z,1544038911.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:41:51.664Z,1544038911.664 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:41:51.664Z,1544038911.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19 2018-12-05T19:41:51.665Z,1544038911.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:41:51.722Z,1544038911.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:41:51.722Z,1544038911.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:41:52.070Z,1544038912.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:41:52.070Z,1544038912.070 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19 2018-12-05T19:41:52.071Z,1544038912.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:41:52.071Z,1544038912.071 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19 2018-12-05T19:41:52.457Z,1544038912.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:41:52.458Z,1544038912.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:41:52.458Z,1544038912.458 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:41:52.459Z,1544038912.459 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:41:52.459Z,1544038912.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:41:52.459Z,1544038912.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:43:52.826Z,1544039032.826 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:43:52.826Z,1544039032.826 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20 2018-12-05T19:43:52.827Z,1544039032.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:43:52.829Z,1544039032.829 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:43:52.829Z,1544039032.829 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20 2018-12-05T19:43:52.829Z,1544039032.829 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:43:52.842Z,1544039032.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:43:52.843Z,1544039032.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:43:53.238Z,1544039033.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:43:53.238Z,1544039033.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20 2018-12-05T19:43:53.239Z,1544039033.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:43:53.239Z,1544039033.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20 2018-12-05T19:43:53.617Z,1544039033.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:43:53.618Z,1544039033.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:43:53.618Z,1544039033.618 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:43:53.618Z,1544039033.618 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:43:53.619Z,1544039033.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:43:53.619Z,1544039033.619 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:44:02.826Z,1544039042.826 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T19:44:02.826Z,1544039042.826 [Default:CheckIn:C.Wait] Stopped 2018-12-05T19:44:02.826Z,1544039042.826 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T19:44:02.826Z,1544039042.826 [Default:CheckIn:D] Running Loop=1 2018-12-05T19:44:03.230Z,1544039043.230 [Default:CheckIn:D] Stopped 2018-12-05T19:44:03.230Z,1544039043.230 [Default:CheckIn:E] Running Loop=1 2018-12-05T19:44:03.624Z,1544039043.624 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2789.186719 min 2018-12-05T19:44:03.624Z,1544039043.624 [Default:CheckIn:E] Stopped 2018-12-05T19:44:03.624Z,1544039043.624 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T19:44:03.624Z,1544039043.624 [Default:CheckIn] Stopped 2018-12-05T19:44:03.624Z,1544039043.624 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T19:44:03.625Z,1544039043.625 [Default:CheckIn](INFO): Running loop #271 2018-12-05T19:44:03.625Z,1544039043.625 [Default:CheckIn] Running Loop=271 2018-12-05T19:44:03.625Z,1544039043.625 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T19:44:03.625Z,1544039043.625 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T19:44:04.395Z,1544039044.395 [NAL9602](INFO): Powering up 2018-12-05T19:44:15.199Z,1544039055.199 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:44:47.151Z,1544039087.151 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T19:44:47.234Z,1544039087.234 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T19:44:47.234Z,1544039087.234 [NAL9602] Data Fault, FailCount= 3 2018-12-05T19:44:47.234Z,1544039087.234 [NAL9602](ERROR): Data Fault 2018-12-05T19:44:47.306Z,1544039087.306 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T19:44:47.551Z,1544039087.551 [NAL9602](INFO): Powering down 2018-12-05T19:44:48.395Z,1544039088.395 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T19:44:48.396Z,1544039088.396 [NAL9602] No Fault, FailCount= 3 2018-12-05T19:45:17.667Z,1544039117.667 [NAL9602](INFO): Powering up NAL9602 2018-12-05T19:45:28.863Z,1544039128.863 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:45:29.663Z,1544039129.663 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T19:45:29.663Z,1544039129.663 [NAL9602] Data Fault, FailCount= 4 2018-12-05T19:45:29.663Z,1544039129.663 [NAL9602](ERROR): Data Fault 2018-12-05T19:45:29.722Z,1544039129.722 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T19:45:30.067Z,1544039130.067 [NAL9602](INFO): Powering down 2018-12-05T19:45:33.440Z,1544039133.440 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T19:45:33.440Z,1544039133.440 [NAL9602] No Fault, FailCount= 4 2018-12-05T19:45:53.701Z,1544039153.701 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:45:53.701Z,1544039153.701 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21 2018-12-05T19:45:53.701Z,1544039153.701 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:45:53.703Z,1544039153.703 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:45:53.703Z,1544039153.703 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 21 2018-12-05T19:45:53.703Z,1544039153.703 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:45:53.733Z,1544039153.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:45:53.733Z,1544039153.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:45:54.140Z,1544039154.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:45:54.140Z,1544039154.140 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21 2018-12-05T19:45:54.140Z,1544039154.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:45:54.140Z,1544039154.140 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 21 2018-12-05T19:45:54.500Z,1544039154.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:45:54.500Z,1544039154.500 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:45:54.500Z,1544039154.500 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:45:54.501Z,1544039154.501 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:45:54.501Z,1544039154.501 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:45:54.502Z,1544039154.502 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:46:00.083Z,1544039160.083 [NAL9602](INFO): Powering up NAL9602 2018-12-05T19:46:10.899Z,1544039170.899 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:47:54.846Z,1544039274.846 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:47:54.847Z,1544039274.847 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22 2018-12-05T19:47:54.847Z,1544039274.847 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:47:54.849Z,1544039274.849 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:47:54.849Z,1544039274.849 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 22 2018-12-05T19:47:54.849Z,1544039274.849 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:47:54.863Z,1544039274.863 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:47:54.863Z,1544039274.863 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:47:55.253Z,1544039275.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:47:55.253Z,1544039275.253 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22 2018-12-05T19:47:55.255Z,1544039275.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:47:55.255Z,1544039275.255 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 22 2018-12-05T19:47:55.640Z,1544039275.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:47:55.641Z,1544039275.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:47:55.641Z,1544039275.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:47:55.641Z,1544039275.641 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:47:55.642Z,1544039275.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:47:55.642Z,1544039275.642 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:49:04.580Z,1544039344.580 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T19:44:03.6Z 2018-12-05T19:49:04.580Z,1544039344.580 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T19:49:04.580Z,1544039344.580 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T19:49:09.530Z,1544039349.530 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0810.lzma 2018-12-05T19:49:10.489Z,1544039350.489 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0810.lzma.bak 2018-12-05T19:49:10.490Z,1544039350.490 [DataOverHttps](INFO): SBD MOMSN=8970038 2018-12-05T19:49:19.754Z,1544039359.754 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T19:49:19.825Z,1544039359.825 [DataOverHttps](INFO): Sending 342 bytes from file Logs/20181203T211451/Express0811.lzma 2018-12-05T19:49:20.625Z,1544039360.625 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0811.lzma.bak 2018-12-05T19:49:20.625Z,1544039360.625 [DataOverHttps](INFO): SBD MOMSN=8970040 2018-12-05T19:49:21.993Z,1544039361.993 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T19:49:21.993Z,1544039361.993 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T19:49:21.993Z,1544039361.993 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T19:49:50.001Z,1544039390.001 [NAL9602](INFO): Powering down 2018-12-05T19:49:56.020Z,1544039396.020 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:49:56.020Z,1544039396.020 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23 2018-12-05T19:49:56.020Z,1544039396.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:49:56.022Z,1544039396.022 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:49:56.022Z,1544039396.022 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 23 2018-12-05T19:49:56.022Z,1544039396.022 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:49:56.052Z,1544039396.052 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:49:56.052Z,1544039396.052 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:49:56.446Z,1544039396.446 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:49:56.446Z,1544039396.446 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23 2018-12-05T19:49:56.447Z,1544039396.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:49:56.447Z,1544039396.447 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 23 2018-12-05T19:49:56.826Z,1544039396.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:49:56.826Z,1544039396.826 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:49:56.827Z,1544039396.827 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:49:56.827Z,1544039396.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:49:56.827Z,1544039396.827 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:49:56.828Z,1544039396.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:51:57.186Z,1544039517.186 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:51:57.186Z,1544039517.186 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24 2018-12-05T19:51:57.187Z,1544039517.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:51:57.189Z,1544039517.189 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:51:57.189Z,1544039517.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 24 2018-12-05T19:51:57.189Z,1544039517.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:51:57.202Z,1544039517.202 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:51:57.202Z,1544039517.202 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:51:57.592Z,1544039517.592 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:51:57.592Z,1544039517.592 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24 2018-12-05T19:51:57.593Z,1544039517.593 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:51:57.593Z,1544039517.593 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 24 2018-12-05T19:51:57.982Z,1544039517.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:51:57.983Z,1544039517.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:51:57.983Z,1544039517.983 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:51:57.983Z,1544039517.983 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:51:57.984Z,1544039517.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:51:57.984Z,1544039517.984 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:52:35.147Z,1544039555.147 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T19:52:35.147Z,1544039555.147 [DropWeight] No Fault, FailCount= 1 2018-12-05T19:53:58.258Z,1544039638.258 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:53:58.258Z,1544039638.258 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25 2018-12-05T19:53:58.258Z,1544039638.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:53:58.260Z,1544039638.260 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:53:58.260Z,1544039638.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 25 2018-12-05T19:53:58.260Z,1544039638.260 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:53:58.273Z,1544039638.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:53:58.274Z,1544039638.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:53:58.665Z,1544039638.665 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:53:58.665Z,1544039638.665 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25 2018-12-05T19:53:58.666Z,1544039638.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:53:58.666Z,1544039638.666 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 25 2018-12-05T19:53:59.043Z,1544039639.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:53:59.044Z,1544039639.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:53:59.044Z,1544039639.044 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:53:59.044Z,1544039639.044 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:53:59.045Z,1544039639.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:53:59.045Z,1544039639.045 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:54:22.294Z,1544039662.294 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T19:54:22.294Z,1544039662.294 [Default:CheckIn:C.Wait] Stopped 2018-12-05T19:54:22.294Z,1544039662.294 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T19:54:22.294Z,1544039662.294 [Default:CheckIn:D] Running Loop=1 2018-12-05T19:54:22.688Z,1544039662.688 [Default:CheckIn:D] Stopped 2018-12-05T19:54:22.688Z,1544039662.688 [Default:CheckIn:E] Running Loop=1 2018-12-05T19:54:23.089Z,1544039663.089 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2799.511198 min 2018-12-05T19:54:23.090Z,1544039663.090 [Default:CheckIn:E] Stopped 2018-12-05T19:54:23.090Z,1544039663.090 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T19:54:23.090Z,1544039663.090 [Default:CheckIn] Stopped 2018-12-05T19:54:23.090Z,1544039663.090 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T19:54:23.090Z,1544039663.090 [Default:CheckIn](INFO): Running loop #272 2018-12-05T19:54:23.090Z,1544039663.090 [Default:CheckIn] Running Loop=272 2018-12-05T19:54:23.091Z,1544039663.091 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T19:54:23.091Z,1544039663.091 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T19:54:23.859Z,1544039663.859 [NAL9602](INFO): Powering up 2018-12-05T19:54:35.060Z,1544039675.060 [NAL9602](INFO): NAL9602 initialized 2018-12-05T19:55:59.082Z,1544039759.082 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:55:59.082Z,1544039759.082 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26 2018-12-05T19:55:59.082Z,1544039759.082 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:55:59.084Z,1544039759.084 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:55:59.084Z,1544039759.084 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 26 2018-12-05T19:55:59.085Z,1544039759.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:55:59.098Z,1544039759.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:55:59.098Z,1544039759.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:55:59.494Z,1544039759.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:55:59.494Z,1544039759.494 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26 2018-12-05T19:55:59.494Z,1544039759.494 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:55:59.494Z,1544039759.494 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 26 2018-12-05T19:55:59.877Z,1544039759.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:55:59.877Z,1544039759.877 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:55:59.878Z,1544039759.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:55:59.878Z,1544039759.878 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:55:59.879Z,1544039759.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:55:59.879Z,1544039759.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:57:59.990Z,1544039879.990 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:57:59.991Z,1544039879.991 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27 2018-12-05T19:57:59.991Z,1544039879.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T19:57:59.993Z,1544039879.993 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T19:57:59.993Z,1544039879.993 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 27 2018-12-05T19:57:59.993Z,1544039879.993 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T19:58:00.039Z,1544039880.039 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T19:58:00.039Z,1544039880.039 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T19:58:00.398Z,1544039880.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T19:58:00.399Z,1544039880.399 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27 2018-12-05T19:58:00.399Z,1544039880.399 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T19:58:00.399Z,1544039880.399 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 27 2018-12-05T19:58:00.790Z,1544039880.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T19:58:00.790Z,1544039880.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:58:00.791Z,1544039880.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:58:00.791Z,1544039880.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T19:58:00.791Z,1544039880.791 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T19:58:00.792Z,1544039880.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T19:59:23.863Z,1544039963.863 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T19:54:23.1Z 2018-12-05T19:59:23.863Z,1544039963.863 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T19:59:23.863Z,1544039963.863 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T19:59:28.989Z,1544039968.989 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0813.lzma 2018-12-05T19:59:29.789Z,1544039969.789 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0813.lzma.bak 2018-12-05T19:59:29.789Z,1544039969.789 [DataOverHttps](INFO): SBD MOMSN=8970056 2018-12-05T19:59:39.049Z,1544039979.049 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T19:59:39.131Z,1544039979.131 [DataOverHttps](INFO): Sending 287 bytes from file Logs/20181203T211451/Express0814.lzma 2018-12-05T19:59:39.896Z,1544039979.896 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0814.lzma.bak 2018-12-05T19:59:39.896Z,1544039979.896 [DataOverHttps](INFO): SBD MOMSN=8970058 2018-12-05T19:59:41.428Z,1544039981.428 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T19:59:41.428Z,1544039981.428 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T19:59:41.429Z,1544039981.429 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T20:00:01.105Z,1544040001.105 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:00:01.105Z,1544040001.105 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28 2018-12-05T20:00:01.105Z,1544040001.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:00:01.107Z,1544040001.107 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:00:01.108Z,1544040001.108 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 28 2018-12-05T20:00:01.108Z,1544040001.108 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:00:01.121Z,1544040001.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:00:01.121Z,1544040001.121 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:00:01.526Z,1544040001.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:00:01.526Z,1544040001.526 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28 2018-12-05T20:00:01.526Z,1544040001.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:00:01.527Z,1544040001.527 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 28 2018-12-05T20:00:01.912Z,1544040001.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:00:01.913Z,1544040001.913 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:00:01.913Z,1544040001.913 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:00:01.913Z,1544040001.913 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:00:01.914Z,1544040001.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:00:01.914Z,1544040001.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:00:09.487Z,1544040009.487 [NAL9602](INFO): Powering down 2018-12-05T20:00:23.254Z,1544040023.254 [Reporter](INFO): platform_buoyancy_position 961.023557 cc 2018-12-05T20:02:02.282Z,1544040122.282 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:02:02.282Z,1544040122.282 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29 2018-12-05T20:02:02.283Z,1544040122.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:02:02.285Z,1544040122.285 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:02:02.285Z,1544040122.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 29 2018-12-05T20:02:02.285Z,1544040122.285 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:02:02.298Z,1544040122.298 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:02:02.299Z,1544040122.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:02:02.692Z,1544040122.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:02:02.692Z,1544040122.692 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29 2018-12-05T20:02:02.693Z,1544040122.693 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:02:02.693Z,1544040122.693 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 29 2018-12-05T20:02:05.936Z,1544040125.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:02:05.937Z,1544040125.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:02:05.937Z,1544040125.937 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:02:05.938Z,1544040125.938 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:02:05.938Z,1544040125.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:02:05.939Z,1544040125.939 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:04:05.961Z,1544040245.961 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:04:05.961Z,1544040245.961 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30 2018-12-05T20:04:05.961Z,1544040245.961 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:04:05.963Z,1544040245.963 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:04:05.963Z,1544040245.963 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 30 2018-12-05T20:04:05.963Z,1544040245.963 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:04:05.976Z,1544040245.976 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:04:05.977Z,1544040245.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:04:06.378Z,1544040246.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:04:06.378Z,1544040246.378 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30 2018-12-05T20:04:06.378Z,1544040246.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:04:06.378Z,1544040246.378 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 30 2018-12-05T20:04:06.766Z,1544040246.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:04:06.767Z,1544040246.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:04:06.767Z,1544040246.767 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:04:06.767Z,1544040246.767 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:04:06.768Z,1544040246.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:04:06.768Z,1544040246.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:04:41.918Z,1544040281.918 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T20:04:41.918Z,1544040281.918 [Default:CheckIn:C.Wait] Stopped 2018-12-05T20:04:41.919Z,1544040281.919 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T20:04:41.919Z,1544040281.919 [Default:CheckIn:D] Running Loop=1 2018-12-05T20:04:42.318Z,1544040282.318 [Default:CheckIn:D] Stopped 2018-12-05T20:04:42.318Z,1544040282.318 [Default:CheckIn:E] Running Loop=1 2018-12-05T20:04:42.712Z,1544040282.712 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2809.838281 min 2018-12-05T20:04:42.713Z,1544040282.713 [Default:CheckIn:E] Stopped 2018-12-05T20:04:42.713Z,1544040282.713 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T20:04:42.713Z,1544040282.713 [Default:CheckIn] Stopped 2018-12-05T20:04:42.713Z,1544040282.713 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T20:04:42.713Z,1544040282.713 [Default:CheckIn](INFO): Running loop #273 2018-12-05T20:04:42.713Z,1544040282.713 [Default:CheckIn] Running Loop=273 2018-12-05T20:04:42.713Z,1544040282.713 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T20:04:42.714Z,1544040282.714 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T20:04:43.483Z,1544040283.483 [NAL9602](INFO): Powering up 2018-12-05T20:04:54.284Z,1544040294.284 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:04:55.082Z,1544040295.082 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T20:04:55.082Z,1544040295.082 [NAL9602] Data Fault, FailCount= 5 2018-12-05T20:04:55.082Z,1544040295.082 [NAL9602](ERROR): Data Fault 2018-12-05T20:04:55.116Z,1544040295.116 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T20:04:55.116Z,1544040295.116 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T20:04:55.484Z,1544040295.484 [NAL9602](INFO): Powering down 2018-12-05T20:04:55.534Z,1544040295.534 [CBIT](INFO): Critical error at 20181205T200455 2018-12-05T20:06:06.823Z,1544040366.823 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:06:06.823Z,1544040366.823 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31 2018-12-05T20:06:06.823Z,1544040366.823 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:06:06.825Z,1544040366.825 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:06:06.825Z,1544040366.825 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 31 2018-12-05T20:06:06.826Z,1544040366.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:06:06.840Z,1544040366.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:06:06.840Z,1544040366.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:06:07.242Z,1544040367.242 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:06:07.242Z,1544040367.242 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31 2018-12-05T20:06:07.243Z,1544040367.243 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:06:07.243Z,1544040367.243 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 31 2018-12-05T20:06:07.622Z,1544040367.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:06:07.623Z,1544040367.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:06:07.623Z,1544040367.623 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:06:07.623Z,1544040367.623 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:06:07.624Z,1544040367.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:06:07.624Z,1544040367.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:06:55.270Z,1544040415.270 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T20:06:55.270Z,1544040415.270 [NAL9602] No Fault, FailCount= 5 2018-12-05T20:06:55.632Z,1544040415.632 [NAL9602](INFO): Powering up NAL9602 2018-12-05T20:07:06.832Z,1544040426.832 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:08:07.978Z,1544040487.978 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:08:07.978Z,1544040487.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32 2018-12-05T20:08:07.979Z,1544040487.979 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:08:07.981Z,1544040487.981 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:08:07.981Z,1544040487.981 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 32 2018-12-05T20:08:07.981Z,1544040487.981 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:08:07.994Z,1544040487.994 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:08:07.994Z,1544040487.994 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:08:08.390Z,1544040488.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:08:08.390Z,1544040488.390 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32 2018-12-05T20:08:08.391Z,1544040488.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:08:08.391Z,1544040488.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 32 2018-12-05T20:08:08.774Z,1544040488.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:08:08.775Z,1544040488.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:08:08.775Z,1544040488.775 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:08:08.776Z,1544040488.776 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:08:08.776Z,1544040488.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:08:08.776Z,1544040488.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:09:43.577Z,1544040583.577 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T20:04:42.7Z 2018-12-05T20:09:43.577Z,1544040583.577 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T20:09:43.577Z,1544040583.577 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T20:09:48.549Z,1544040588.549 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0816.lzma 2018-12-05T20:09:49.320Z,1544040589.320 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0816.lzma.bak 2018-12-05T20:09:49.320Z,1544040589.320 [DataOverHttps](INFO): SBD MOMSN=8970131 2018-12-05T20:09:58.946Z,1544040598.946 [DataOverHttps](INFO): Sending 306 bytes from file Logs/20181203T211451/Express0817.lzma 2018-12-05T20:09:59.721Z,1544040599.721 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0817.lzma.bak 2018-12-05T20:09:59.721Z,1544040599.721 [DataOverHttps](INFO): SBD MOMSN=8970134 2018-12-05T20:10:01.116Z,1544040601.116 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T20:10:01.116Z,1544040601.116 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T20:10:01.116Z,1544040601.116 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T20:10:09.126Z,1544040609.126 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:10:09.127Z,1544040609.127 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33 2018-12-05T20:10:09.127Z,1544040609.127 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:10:09.129Z,1544040609.129 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:10:09.129Z,1544040609.129 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 33 2018-12-05T20:10:09.129Z,1544040609.129 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:10:09.142Z,1544040609.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:10:09.142Z,1544040609.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:10:09.575Z,1544040609.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:10:09.575Z,1544040609.575 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33 2018-12-05T20:10:09.576Z,1544040609.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:10:09.576Z,1544040609.576 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 33 2018-12-05T20:10:09.939Z,1544040609.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:10:09.939Z,1544040609.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:10:09.939Z,1544040609.939 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:10:09.940Z,1544040609.940 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:10:09.940Z,1544040609.940 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:10:09.941Z,1544040609.941 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:12:10.128Z,1544040730.128 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T20:12:10.149Z,1544040730.149 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:12:10.149Z,1544040730.149 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34 2018-12-05T20:12:10.149Z,1544040730.149 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:12:10.151Z,1544040730.151 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:12:10.151Z,1544040730.151 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 34 2018-12-05T20:12:10.152Z,1544040730.152 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:12:10.181Z,1544040730.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:12:10.181Z,1544040730.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:12:10.590Z,1544040730.590 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:12:10.590Z,1544040730.590 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34 2018-12-05T20:12:10.599Z,1544040730.599 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:12:10.599Z,1544040730.599 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 34 2018-12-05T20:12:10.949Z,1544040730.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:12:10.950Z,1544040730.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:12:10.950Z,1544040730.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:12:10.951Z,1544040730.951 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:12:10.951Z,1544040730.951 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:12:10.952Z,1544040730.952 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:12:40.905Z,1544040760.905 [NAL9602](INFO): Powering down 2018-12-05T20:14:11.316Z,1544040851.316 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:14:11.316Z,1544040851.316 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35 2018-12-05T20:14:11.316Z,1544040851.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:14:11.318Z,1544040851.318 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:14:11.318Z,1544040851.318 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 35 2018-12-05T20:14:11.318Z,1544040851.318 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:14:11.331Z,1544040851.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:14:11.331Z,1544040851.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:14:11.442Z,1544040851.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:14:11.442Z,1544040851.442 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35 2018-12-05T20:14:11.443Z,1544040851.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:14:11.443Z,1544040851.443 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 35 2018-12-05T20:14:11.787Z,1544040851.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:14:11.787Z,1544040851.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:14:11.787Z,1544040851.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:14:11.788Z,1544040851.788 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:14:11.788Z,1544040851.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:14:11.789Z,1544040851.789 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:15:01.422Z,1544040901.422 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T20:15:01.423Z,1544040901.423 [Default:CheckIn:C.Wait] Stopped 2018-12-05T20:15:01.423Z,1544040901.423 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T20:15:01.423Z,1544040901.423 [Default:CheckIn:D] Running Loop=1 2018-12-05T20:15:01.816Z,1544040901.816 [Default:CheckIn:D] Stopped 2018-12-05T20:15:01.816Z,1544040901.816 [Default:CheckIn:E] Running Loop=1 2018-12-05T20:15:02.217Z,1544040902.217 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2820.163281 min 2018-12-05T20:15:02.217Z,1544040902.217 [Default:CheckIn:E] Stopped 2018-12-05T20:15:02.217Z,1544040902.217 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T20:15:02.217Z,1544040902.217 [Default:CheckIn] Stopped 2018-12-05T20:15:02.217Z,1544040902.217 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T20:15:02.218Z,1544040902.218 [Default:CheckIn](INFO): Running loop #274 2018-12-05T20:15:02.218Z,1544040902.218 [Default:CheckIn] Running Loop=274 2018-12-05T20:15:02.218Z,1544040902.218 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T20:15:02.218Z,1544040902.218 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T20:15:02.991Z,1544040902.991 [NAL9602](INFO): Powering up 2018-12-05T20:15:14.188Z,1544040914.188 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:15:46.200Z,1544040946.200 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T20:15:46.283Z,1544040946.283 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T20:15:46.283Z,1544040946.283 [NAL9602] Data Fault, FailCount= 1 2018-12-05T20:15:46.283Z,1544040946.283 [NAL9602](ERROR): Data Fault 2018-12-05T20:15:46.352Z,1544040946.352 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T20:15:46.600Z,1544040946.600 [NAL9602](INFO): Powering down 2018-12-05T20:15:47.439Z,1544040947.439 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T20:15:47.439Z,1544040947.439 [NAL9602] No Fault, FailCount= 1 2018-12-05T20:16:11.789Z,1544040971.789 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:16:11.790Z,1544040971.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36 2018-12-05T20:16:11.790Z,1544040971.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:16:11.792Z,1544040971.792 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:16:11.792Z,1544040971.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 36 2018-12-05T20:16:11.792Z,1544040971.792 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:16:11.805Z,1544040971.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:16:11.805Z,1544040971.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:16:12.206Z,1544040972.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:16:12.206Z,1544040972.206 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36 2018-12-05T20:16:12.206Z,1544040972.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:16:12.206Z,1544040972.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 36 2018-12-05T20:16:12.594Z,1544040972.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:16:12.594Z,1544040972.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:16:12.595Z,1544040972.595 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:16:12.595Z,1544040972.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:16:12.595Z,1544040972.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:16:12.596Z,1544040972.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:16:16.964Z,1544040976.964 [NAL9602](INFO): Powering up NAL9602 2018-12-05T20:16:28.164Z,1544040988.164 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:18:12.654Z,1544041092.654 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:18:12.655Z,1544041092.655 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37 2018-12-05T20:18:12.655Z,1544041092.655 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:18:12.657Z,1544041092.657 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:18:12.657Z,1544041092.657 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 37 2018-12-05T20:18:12.657Z,1544041092.657 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:18:12.715Z,1544041092.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:18:12.715Z,1544041092.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:18:13.062Z,1544041093.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:18:13.062Z,1544041093.062 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37 2018-12-05T20:18:13.062Z,1544041093.062 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:18:13.062Z,1544041093.062 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 37 2018-12-05T20:18:13.446Z,1544041093.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:18:13.446Z,1544041093.446 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:18:13.447Z,1544041093.447 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:18:13.458Z,1544041093.458 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:18:13.459Z,1544041093.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:18:13.459Z,1544041093.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:20:03.610Z,1544041203.610 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T20:15:02.2Z 2018-12-05T20:20:03.610Z,1544041203.610 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T20:20:03.610Z,1544041203.610 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T20:20:08.741Z,1544041208.741 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0819.lzma 2018-12-05T20:20:09.521Z,1544041209.521 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0819.lzma.bak 2018-12-05T20:20:09.521Z,1544041209.521 [DataOverHttps](INFO): SBD MOMSN=8970149 2018-12-05T20:20:14.170Z,1544041214.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:20:14.170Z,1544041214.170 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38 2018-12-05T20:20:14.170Z,1544041214.170 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:20:14.172Z,1544041214.172 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:20:14.172Z,1544041214.172 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 38 2018-12-05T20:20:14.173Z,1544041214.173 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:20:14.235Z,1544041214.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:20:14.235Z,1544041214.235 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:20:14.335Z,1544041214.335 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:20:14.335Z,1544041214.335 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38 2018-12-05T20:20:14.336Z,1544041214.336 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:20:14.336Z,1544041214.336 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 38 2018-12-05T20:20:14.686Z,1544041214.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:20:14.703Z,1544041214.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:20:14.703Z,1544041214.703 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:20:14.703Z,1544041214.703 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:20:14.704Z,1544041214.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:20:14.704Z,1544041214.704 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:20:18.946Z,1544041218.946 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T20:20:19.124Z,1544041219.124 [DataOverHttps](INFO): Sending 327 bytes from file Logs/20181203T211451/Express0820.lzma 2018-12-05T20:20:19.925Z,1544041219.925 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0820.lzma.bak 2018-12-05T20:20:19.925Z,1544041219.925 [DataOverHttps](INFO): SBD MOMSN=8970151 2018-12-05T20:20:21.315Z,1544041221.315 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T20:20:21.315Z,1544041221.315 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T20:20:21.315Z,1544041221.315 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T20:20:49.491Z,1544041249.491 [NAL9602](INFO): Powering down 2018-12-05T20:22:14.870Z,1544041334.870 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:22:14.870Z,1544041334.870 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39 2018-12-05T20:22:14.871Z,1544041334.871 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:22:14.873Z,1544041334.873 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:22:14.873Z,1544041334.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 39 2018-12-05T20:22:14.873Z,1544041334.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:22:14.887Z,1544041334.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:22:14.887Z,1544041334.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:22:15.276Z,1544041335.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:22:15.276Z,1544041335.276 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39 2018-12-05T20:22:15.277Z,1544041335.277 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:22:15.277Z,1544041335.277 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 39 2018-12-05T20:22:15.659Z,1544041335.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:22:15.659Z,1544041335.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:22:15.660Z,1544041335.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:22:15.660Z,1544041335.660 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:22:15.660Z,1544041335.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:22:15.661Z,1544041335.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:22:36.450Z,1544041356.450 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T20:22:36.450Z,1544041356.450 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T20:22:36.450Z,1544041356.450 [DropWeight](ERROR): Hardware Fault 2018-12-05T20:22:36.531Z,1544041356.531 [CBIT](INFO): Critical error at 20181205T202236 2018-12-05T20:22:36.534Z,1544041356.534 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T20:22:36.546Z,1544041356.546 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T20:22:36.915Z,1544041356.915 [CBIT](INFO): Critical error at 20181205T202236 2018-12-05T20:24:15.895Z,1544041455.895 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:24:15.895Z,1544041455.895 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40 2018-12-05T20:24:15.895Z,1544041455.895 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:24:15.897Z,1544041455.897 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:24:15.898Z,1544041455.898 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 40 2018-12-05T20:24:15.898Z,1544041455.898 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:24:15.911Z,1544041455.911 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:24:15.912Z,1544041455.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:24:16.314Z,1544041456.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:24:16.314Z,1544041456.314 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40 2018-12-05T20:24:16.315Z,1544041456.315 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:24:16.315Z,1544041456.315 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 40 2018-12-05T20:24:16.697Z,1544041456.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:24:16.697Z,1544041456.697 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:24:16.698Z,1544041456.698 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:24:16.698Z,1544041456.698 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:24:16.699Z,1544041456.699 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:24:16.699Z,1544041456.699 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:25:21.554Z,1544041521.554 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T20:25:21.554Z,1544041521.554 [Default:CheckIn:C.Wait] Stopped 2018-12-05T20:25:21.554Z,1544041521.554 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T20:25:21.554Z,1544041521.554 [Default:CheckIn:D] Running Loop=1 2018-12-05T20:25:21.954Z,1544041521.954 [Default:CheckIn:D] Stopped 2018-12-05T20:25:21.954Z,1544041521.954 [Default:CheckIn:E] Running Loop=1 2018-12-05T20:25:22.354Z,1544041522.354 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2830.498958 min 2018-12-05T20:25:22.354Z,1544041522.354 [Default:CheckIn:E] Stopped 2018-12-05T20:25:22.355Z,1544041522.355 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T20:25:22.355Z,1544041522.355 [Default:CheckIn] Stopped 2018-12-05T20:25:22.355Z,1544041522.355 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T20:25:22.355Z,1544041522.355 [Default:CheckIn](INFO): Running loop #275 2018-12-05T20:25:22.355Z,1544041522.355 [Default:CheckIn] Running Loop=275 2018-12-05T20:25:22.355Z,1544041522.355 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T20:25:22.355Z,1544041522.355 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T20:25:23.117Z,1544041523.117 [NAL9602](INFO): Powering up 2018-12-05T20:25:34.323Z,1544041534.323 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:25:35.120Z,1544041535.120 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T20:25:35.120Z,1544041535.120 [NAL9602] Data Fault, FailCount= 2 2018-12-05T20:25:35.120Z,1544041535.120 [NAL9602](ERROR): Data Fault 2018-12-05T20:25:35.181Z,1544041535.181 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T20:25:35.519Z,1544041535.519 [NAL9602](INFO): Powering down 2018-12-05T20:25:36.368Z,1544041536.368 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T20:25:36.368Z,1544041536.368 [NAL9602] No Fault, FailCount= 2 2018-12-05T20:25:58.713Z,1544041558.713 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T20:26:05.887Z,1544041565.887 [NAL9602](INFO): Powering up NAL9602 2018-12-05T20:26:17.118Z,1544041577.118 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:26:17.118Z,1544041577.118 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41 2018-12-05T20:26:17.118Z,1544041577.118 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:26:17.123Z,1544041577.123 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:26:17.124Z,1544041577.124 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 41 2018-12-05T20:26:17.124Z,1544041577.124 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:26:17.170Z,1544041577.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:26:17.170Z,1544041577.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:26:17.275Z,1544041577.275 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:26:17.275Z,1544041577.275 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41 2018-12-05T20:26:17.276Z,1544041577.276 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:26:17.276Z,1544041577.276 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 41 2018-12-05T20:26:17.587Z,1544041577.587 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:26:17.614Z,1544041577.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:26:17.614Z,1544041577.614 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:26:17.615Z,1544041577.615 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:26:17.615Z,1544041577.615 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:26:17.615Z,1544041577.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:26:17.616Z,1544041577.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:28:17.706Z,1544041697.706 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:28:17.706Z,1544041697.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42 2018-12-05T20:28:17.706Z,1544041697.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:28:17.708Z,1544041697.708 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:28:17.709Z,1544041697.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 42 2018-12-05T20:28:17.709Z,1544041697.709 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:28:17.722Z,1544041697.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:28:17.722Z,1544041697.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:28:18.110Z,1544041698.110 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:28:18.111Z,1544041698.111 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42 2018-12-05T20:28:18.111Z,1544041698.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:28:18.111Z,1544041698.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 42 2018-12-05T20:28:18.502Z,1544041698.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:28:18.507Z,1544041698.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:28:18.507Z,1544041698.507 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:28:18.507Z,1544041698.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:28:18.508Z,1544041698.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:28:18.508Z,1544041698.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:30:18.572Z,1544041818.572 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:30:18.572Z,1544041818.572 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43 2018-12-05T20:30:18.572Z,1544041818.572 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:30:18.574Z,1544041818.574 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:30:18.574Z,1544041818.574 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 43 2018-12-05T20:30:18.574Z,1544041818.574 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:30:18.589Z,1544041818.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:30:18.589Z,1544041818.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:30:18.987Z,1544041818.987 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:30:18.988Z,1544041818.988 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43 2018-12-05T20:30:18.988Z,1544041818.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:30:18.988Z,1544041818.988 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 43 2018-12-05T20:30:19.386Z,1544041819.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:30:19.387Z,1544041819.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:30:19.387Z,1544041819.387 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:30:19.387Z,1544041819.387 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:30:19.388Z,1544041819.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:30:19.388Z,1544041819.388 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:30:23.699Z,1544041823.699 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T20:25:22.4Z 2018-12-05T20:30:23.699Z,1544041823.699 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T20:30:23.699Z,1544041823.699 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T20:30:28.685Z,1544041828.685 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181203T211451/Courier0822.lzma 2018-12-05T20:30:29.485Z,1544041829.485 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0822.lzma.bak 2018-12-05T20:30:29.485Z,1544041829.485 [DataOverHttps](INFO): SBD MOMSN=8970166 2018-12-05T20:30:39.038Z,1544041839.038 [DataOverHttps](INFO): Sending 318 bytes from file Logs/20181203T211451/Express0823.lzma 2018-12-05T20:30:39.837Z,1544041839.837 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0823.lzma.bak 2018-12-05T20:30:39.837Z,1544041839.837 [DataOverHttps](INFO): SBD MOMSN=8970170 2018-12-05T20:30:41.275Z,1544041841.275 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T20:30:41.275Z,1544041841.275 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T20:30:41.275Z,1544041841.275 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T20:31:19.991Z,1544041879.991 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T20:31:50.439Z,1544041910.439 [NAL9602](INFO): Powering down 2018-12-05T20:32:19.614Z,1544041939.614 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:32:19.614Z,1544041939.614 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44 2018-12-05T20:32:19.614Z,1544041939.614 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:32:19.616Z,1544041939.616 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:32:19.616Z,1544041939.616 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 44 2018-12-05T20:32:19.617Z,1544041939.617 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:32:19.652Z,1544041939.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:32:19.652Z,1544041939.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:32:20.056Z,1544041940.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:32:20.057Z,1544041940.057 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44 2018-12-05T20:32:20.057Z,1544041940.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:32:20.057Z,1544041940.057 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 44 2018-12-05T20:32:20.407Z,1544041940.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:32:20.408Z,1544041940.408 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:32:20.408Z,1544041940.408 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:32:20.408Z,1544041940.408 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:32:20.409Z,1544041940.409 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:32:20.409Z,1544041940.409 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:34:20.588Z,1544042060.588 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:34:20.588Z,1544042060.588 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45 2018-12-05T20:34:20.588Z,1544042060.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:34:20.591Z,1544042060.591 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:34:20.591Z,1544042060.591 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 45 2018-12-05T20:34:20.591Z,1544042060.591 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:34:20.605Z,1544042060.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:34:20.605Z,1544042060.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:34:21.008Z,1544042061.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:34:21.008Z,1544042061.008 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45 2018-12-05T20:34:21.008Z,1544042061.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:34:21.008Z,1544042061.008 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 45 2018-12-05T20:34:21.390Z,1544042061.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:34:21.391Z,1544042061.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:34:21.391Z,1544042061.391 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:34:21.391Z,1544042061.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:34:21.392Z,1544042061.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:34:21.392Z,1544042061.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:35:41.714Z,1544042141.714 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T20:35:41.714Z,1544042141.714 [Default:CheckIn:C.Wait] Stopped 2018-12-05T20:35:41.714Z,1544042141.714 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T20:35:41.714Z,1544042141.714 [Default:CheckIn:D] Running Loop=1 2018-12-05T20:35:42.107Z,1544042142.107 [Default:CheckIn:D] Stopped 2018-12-05T20:35:42.107Z,1544042142.107 [Default:CheckIn:E] Running Loop=1 2018-12-05T20:35:42.533Z,1544042142.533 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2840.834635 min 2018-12-05T20:35:42.533Z,1544042142.533 [Default:CheckIn:E] Stopped 2018-12-05T20:35:42.533Z,1544042142.533 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T20:35:42.533Z,1544042142.533 [Default:CheckIn] Stopped 2018-12-05T20:35:42.534Z,1544042142.534 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T20:35:42.534Z,1544042142.534 [Default:CheckIn](INFO): Running loop #276 2018-12-05T20:35:42.534Z,1544042142.534 [Default:CheckIn] Running Loop=276 2018-12-05T20:35:42.534Z,1544042142.534 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T20:35:42.536Z,1544042142.536 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T20:35:43.287Z,1544042143.287 [NAL9602](INFO): Powering up 2018-12-05T20:35:54.090Z,1544042154.090 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:36:21.432Z,1544042181.432 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:36:21.433Z,1544042181.433 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46 2018-12-05T20:36:21.433Z,1544042181.433 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:36:21.435Z,1544042181.435 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:36:21.435Z,1544042181.435 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 46 2018-12-05T20:36:21.435Z,1544042181.435 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:36:21.448Z,1544042181.448 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:36:21.448Z,1544042181.448 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:36:21.843Z,1544042181.843 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:36:21.843Z,1544042181.843 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46 2018-12-05T20:36:21.844Z,1544042181.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:36:21.844Z,1544042181.844 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 46 2018-12-05T20:36:22.228Z,1544042182.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:36:22.229Z,1544042182.229 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:36:22.229Z,1544042182.229 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:36:22.230Z,1544042182.230 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:36:22.230Z,1544042182.230 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:36:22.231Z,1544042182.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:36:25.804Z,1544042185.804 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T20:36:25.882Z,1544042185.882 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T20:36:25.882Z,1544042185.882 [NAL9602] Data Fault, FailCount= 3 2018-12-05T20:36:25.882Z,1544042185.882 [NAL9602](ERROR): Data Fault 2018-12-05T20:36:25.950Z,1544042185.950 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T20:36:26.208Z,1544042186.208 [NAL9602](INFO): Powering down 2018-12-05T20:36:27.043Z,1544042187.043 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T20:36:27.043Z,1544042187.043 [NAL9602] No Fault, FailCount= 3 2018-12-05T20:36:56.215Z,1544042216.215 [NAL9602](INFO): Powering up NAL9602 2018-12-05T20:37:07.412Z,1544042227.412 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:37:08.209Z,1544042228.209 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T20:37:08.209Z,1544042228.209 [NAL9602] Data Fault, FailCount= 4 2018-12-05T20:37:08.210Z,1544042228.210 [NAL9602](ERROR): Data Fault 2018-12-05T20:37:08.244Z,1544042228.244 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T20:37:08.611Z,1544042228.611 [NAL9602](INFO): Powering down 2018-12-05T20:37:12.224Z,1544042232.224 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T20:37:12.224Z,1544042232.224 [NAL9602] No Fault, FailCount= 4 2018-12-05T20:37:36.689Z,1544042256.689 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T20:37:36.689Z,1544042256.689 [DropWeight] No Fault, FailCount= 1 2018-12-05T20:37:38.640Z,1544042258.640 [NAL9602](INFO): Powering up NAL9602 2018-12-05T20:37:49.808Z,1544042269.808 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:38:22.549Z,1544042302.549 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:38:22.549Z,1544042302.549 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47 2018-12-05T20:38:22.549Z,1544042302.549 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:38:22.551Z,1544042302.551 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:38:22.552Z,1544042302.552 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 47 2018-12-05T20:38:22.552Z,1544042302.552 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:38:22.565Z,1544042302.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:38:22.565Z,1544042302.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:38:22.692Z,1544042302.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:38:22.692Z,1544042302.692 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47 2018-12-05T20:38:22.692Z,1544042302.692 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:38:22.692Z,1544042302.692 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 47 2018-12-05T20:38:23.012Z,1544042303.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:38:23.013Z,1544042303.013 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:38:23.013Z,1544042303.013 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:38:23.013Z,1544042303.013 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:38:23.014Z,1544042303.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:38:23.014Z,1544042303.014 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:40:23.218Z,1544042423.218 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:40:23.218Z,1544042423.218 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48 2018-12-05T20:40:23.218Z,1544042423.218 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:40:23.220Z,1544042423.220 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:40:23.220Z,1544042423.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 48 2018-12-05T20:40:23.221Z,1544042423.221 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:40:23.264Z,1544042423.264 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:40:23.264Z,1544042423.264 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:40:23.661Z,1544042423.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:40:23.662Z,1544042423.662 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48 2018-12-05T20:40:23.662Z,1544042423.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:40:23.662Z,1544042423.662 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 48 2018-12-05T20:40:24.026Z,1544042424.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:40:24.027Z,1544042424.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:40:24.027Z,1544042424.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:40:24.027Z,1544042424.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:40:24.028Z,1544042424.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:40:24.028Z,1544042424.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:40:43.558Z,1544042443.558 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T20:35:42.5Z 2018-12-05T20:40:43.558Z,1544042443.558 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T20:40:43.559Z,1544042443.559 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T20:40:48.517Z,1544042448.517 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0825.lzma 2018-12-05T20:40:49.301Z,1544042449.301 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0825.lzma.bak 2018-12-05T20:40:49.301Z,1544042449.301 [DataOverHttps](INFO): SBD MOMSN=8970268 2018-12-05T20:40:58.838Z,1544042458.838 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T20:40:58.897Z,1544042458.897 [DataOverHttps](INFO): Sending 344 bytes from file Logs/20181203T211451/Express0826.lzma 2018-12-05T20:40:59.697Z,1544042459.697 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0826.lzma.bak 2018-12-05T20:40:59.697Z,1544042459.697 [DataOverHttps](INFO): SBD MOMSN=8970270 2018-12-05T20:41:01.076Z,1544042461.076 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T20:41:01.076Z,1544042461.076 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T20:41:01.076Z,1544042461.076 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T20:41:29.099Z,1544042489.099 [NAL9602](INFO): Powering down 2018-12-05T20:42:24.131Z,1544042544.131 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:42:24.131Z,1544042544.131 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49 2018-12-05T20:42:24.131Z,1544042544.131 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:42:24.133Z,1544042544.133 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:42:24.134Z,1544042544.134 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 49 2018-12-05T20:42:24.134Z,1544042544.134 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:42:24.149Z,1544042544.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:42:24.149Z,1544042544.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:42:24.546Z,1544042544.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:42:24.546Z,1544042544.546 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49 2018-12-05T20:42:24.547Z,1544042544.547 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:42:24.547Z,1544042544.547 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 49 2018-12-05T20:42:24.933Z,1544042544.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:42:24.934Z,1544042544.934 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:42:24.936Z,1544042544.936 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:42:24.937Z,1544042544.937 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:42:24.937Z,1544042544.937 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:42:24.938Z,1544042544.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:44:25.259Z,1544042665.259 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:44:25.259Z,1544042665.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50 2018-12-05T20:44:25.259Z,1544042665.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:44:25.261Z,1544042665.261 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:44:25.261Z,1544042665.261 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 50 2018-12-05T20:44:25.261Z,1544042665.261 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:44:25.275Z,1544042665.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:44:25.275Z,1544042665.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:44:25.669Z,1544042665.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:44:25.669Z,1544042665.669 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50 2018-12-05T20:44:25.670Z,1544042665.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:44:25.670Z,1544042665.670 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 50 2018-12-05T20:44:26.040Z,1544042666.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:44:26.040Z,1544042666.040 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:44:26.041Z,1544042666.041 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:44:26.041Z,1544042666.041 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:44:26.041Z,1544042666.041 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:44:26.042Z,1544042666.042 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:46:01.426Z,1544042761.426 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T20:46:01.426Z,1544042761.426 [Default:CheckIn:C.Wait] Stopped 2018-12-05T20:46:01.426Z,1544042761.426 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T20:46:01.426Z,1544042761.426 [Default:CheckIn:D] Running Loop=1 2018-12-05T20:46:01.819Z,1544042761.819 [Default:CheckIn:D] Stopped 2018-12-05T20:46:01.820Z,1544042761.820 [Default:CheckIn:E] Running Loop=1 2018-12-05T20:46:02.226Z,1544042762.226 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2851.163281 min 2018-12-05T20:46:02.226Z,1544042762.226 [Default:CheckIn:E] Stopped 2018-12-05T20:46:02.226Z,1544042762.226 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T20:46:02.227Z,1544042762.227 [Default:CheckIn] Stopped 2018-12-05T20:46:02.227Z,1544042762.227 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T20:46:02.227Z,1544042762.227 [Default:CheckIn](INFO): Running loop #277 2018-12-05T20:46:02.227Z,1544042762.227 [Default:CheckIn] Running Loop=277 2018-12-05T20:46:02.227Z,1544042762.227 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T20:46:02.227Z,1544042762.227 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T20:46:02.991Z,1544042762.991 [NAL9602](INFO): Powering up 2018-12-05T20:46:14.192Z,1544042774.192 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:46:26.204Z,1544042786.204 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:46:26.204Z,1544042786.204 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51 2018-12-05T20:46:26.204Z,1544042786.204 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:46:26.219Z,1544042786.219 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:46:26.219Z,1544042786.219 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 51 2018-12-05T20:46:26.219Z,1544042786.219 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:46:26.245Z,1544042786.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:46:26.245Z,1544042786.245 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:46:26.635Z,1544042786.635 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:46:26.635Z,1544042786.635 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51 2018-12-05T20:46:26.636Z,1544042786.636 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:46:26.636Z,1544042786.636 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 51 2018-12-05T20:46:27.010Z,1544042787.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:46:27.010Z,1544042787.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:46:27.011Z,1544042787.011 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:46:27.011Z,1544042787.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:46:27.011Z,1544042787.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:46:27.012Z,1544042787.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:48:27.374Z,1544042907.374 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:48:27.374Z,1544042907.374 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52 2018-12-05T20:48:27.375Z,1544042907.375 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:48:27.377Z,1544042907.377 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:48:27.377Z,1544042907.377 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 52 2018-12-05T20:48:27.377Z,1544042907.377 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:48:27.391Z,1544042907.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:48:27.391Z,1544042907.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:48:27.809Z,1544042907.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:48:27.809Z,1544042907.809 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52 2018-12-05T20:48:27.809Z,1544042907.809 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:48:27.809Z,1544042907.809 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 52 2018-12-05T20:48:28.180Z,1544042908.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:48:28.181Z,1544042908.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:48:28.181Z,1544042908.181 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:48:28.182Z,1544042908.182 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:48:28.182Z,1544042908.182 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:48:28.183Z,1544042908.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:50:28.259Z,1544043028.259 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:50:28.259Z,1544043028.259 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53 2018-12-05T20:50:28.259Z,1544043028.259 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:50:28.261Z,1544043028.261 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:50:28.261Z,1544043028.261 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 53 2018-12-05T20:50:28.261Z,1544043028.261 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:50:28.303Z,1544043028.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:50:28.303Z,1544043028.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:50:28.395Z,1544043028.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:50:28.395Z,1544043028.395 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53 2018-12-05T20:50:28.396Z,1544043028.396 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:50:28.396Z,1544043028.396 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 53 2018-12-05T20:50:28.754Z,1544043028.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:50:28.755Z,1544043028.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:50:28.755Z,1544043028.755 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:50:28.755Z,1544043028.755 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:50:28.756Z,1544043028.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:50:28.756Z,1544043028.756 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:51:03.466Z,1544043063.466 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T20:46:02.2Z 2018-12-05T20:51:03.466Z,1544043063.466 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T20:51:03.466Z,1544043063.466 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T20:51:08.448Z,1544043068.448 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0828.lzma 2018-12-05T20:51:09.249Z,1544043069.249 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0828.lzma.bak 2018-12-05T20:51:09.249Z,1544043069.249 [DataOverHttps](INFO): SBD MOMSN=8970286 2018-12-05T20:51:18.659Z,1544043078.659 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T20:51:18.744Z,1544043078.744 [DataOverHttps](INFO): Sending 289 bytes from file Logs/20181203T211451/Express0829.lzma 2018-12-05T20:51:19.518Z,1544043079.518 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0829.lzma.bak 2018-12-05T20:51:19.518Z,1544043079.518 [DataOverHttps](INFO): SBD MOMSN=8970288 2018-12-05T20:51:20.900Z,1544043080.900 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T20:51:20.900Z,1544043080.900 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T20:51:20.900Z,1544043080.900 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T20:51:49.167Z,1544043109.167 [NAL9602](INFO): Powering down 2018-12-05T20:52:29.146Z,1544043149.146 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:52:29.147Z,1544043149.147 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54 2018-12-05T20:52:29.147Z,1544043149.147 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:52:29.149Z,1544043149.149 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:52:29.149Z,1544043149.149 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 54 2018-12-05T20:52:29.149Z,1544043149.149 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:52:29.162Z,1544043149.162 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:52:29.199Z,1544043149.199 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:52:29.555Z,1544043149.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:52:29.555Z,1544043149.555 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54 2018-12-05T20:52:29.555Z,1544043149.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:52:29.555Z,1544043149.555 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 54 2018-12-05T20:52:29.946Z,1544043149.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:52:29.946Z,1544043149.946 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:52:29.947Z,1544043149.947 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:52:29.947Z,1544043149.947 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:52:29.947Z,1544043149.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:52:29.948Z,1544043149.948 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:54:30.314Z,1544043270.314 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:54:30.314Z,1544043270.314 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55 2018-12-05T20:54:30.315Z,1544043270.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:54:30.317Z,1544043270.317 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:54:30.317Z,1544043270.317 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 55 2018-12-05T20:54:30.317Z,1544043270.317 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:54:30.330Z,1544043270.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:54:30.331Z,1544043270.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:54:30.726Z,1544043270.726 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:54:30.726Z,1544043270.726 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55 2018-12-05T20:54:30.727Z,1544043270.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:54:30.727Z,1544043270.727 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 55 2018-12-05T20:54:31.105Z,1544043271.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:54:31.105Z,1544043271.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:54:31.105Z,1544043271.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:54:31.106Z,1544043271.106 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:54:31.106Z,1544043271.106 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:54:31.107Z,1544043271.107 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:56:21.084Z,1544043381.084 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T20:56:21.084Z,1544043381.084 [Default:CheckIn:C.Wait] Stopped 2018-12-05T20:56:21.084Z,1544043381.084 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T20:56:21.085Z,1544043381.085 [Default:CheckIn:D] Running Loop=1 2018-12-05T20:56:21.491Z,1544043381.491 [Default:CheckIn:D] Stopped 2018-12-05T20:56:21.491Z,1544043381.491 [Default:CheckIn:E] Running Loop=1 2018-12-05T20:56:21.892Z,1544043381.892 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2861.491146 min 2018-12-05T20:56:21.893Z,1544043381.893 [Default:CheckIn:E] Stopped 2018-12-05T20:56:21.893Z,1544043381.893 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T20:56:21.893Z,1544043381.893 [Default:CheckIn] Stopped 2018-12-05T20:56:21.893Z,1544043381.893 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T20:56:21.893Z,1544043381.893 [Default:CheckIn](INFO): Running loop #278 2018-12-05T20:56:21.893Z,1544043381.893 [Default:CheckIn] Running Loop=278 2018-12-05T20:56:21.893Z,1544043381.893 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T20:56:21.894Z,1544043381.894 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T20:56:22.652Z,1544043382.652 [NAL9602](INFO): Powering up 2018-12-05T20:56:31.479Z,1544043391.479 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:56:31.479Z,1544043391.479 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56 2018-12-05T20:56:31.479Z,1544043391.479 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:56:31.481Z,1544043391.481 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:56:31.481Z,1544043391.481 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 56 2018-12-05T20:56:31.481Z,1544043391.481 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:56:31.531Z,1544043391.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:56:31.532Z,1544043391.532 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:56:31.890Z,1544043391.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:56:31.890Z,1544043391.890 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56 2018-12-05T20:56:31.891Z,1544043391.891 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:56:31.891Z,1544043391.891 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 56 2018-12-05T20:56:32.270Z,1544043392.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:56:32.271Z,1544043392.271 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:56:32.271Z,1544043392.271 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:56:32.271Z,1544043392.271 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:56:32.272Z,1544043392.272 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:56:32.272Z,1544043392.272 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:56:33.456Z,1544043393.456 [NAL9602](INFO): NAL9602 initialized 2018-12-05T20:56:34.255Z,1544043394.255 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T20:56:34.255Z,1544043394.255 [NAL9602] Data Fault, FailCount= 5 2018-12-05T20:56:34.255Z,1544043394.255 [NAL9602](ERROR): Data Fault 2018-12-05T20:56:34.292Z,1544043394.292 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T20:56:34.293Z,1544043394.293 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T20:56:34.655Z,1544043394.655 [NAL9602](INFO): Powering down 2018-12-05T20:56:34.687Z,1544043394.687 [CBIT](INFO): Critical error at 20181205T205634 2018-12-05T20:58:32.393Z,1544043512.393 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:58:32.393Z,1544043512.393 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57 2018-12-05T20:58:32.394Z,1544043512.394 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T20:58:32.396Z,1544043512.396 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T20:58:32.396Z,1544043512.396 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 57 2018-12-05T20:58:32.396Z,1544043512.396 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T20:58:32.410Z,1544043512.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T20:58:32.410Z,1544043512.410 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T20:58:32.810Z,1544043512.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T20:58:32.810Z,1544043512.810 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57 2018-12-05T20:58:32.811Z,1544043512.811 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T20:58:32.811Z,1544043512.811 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 57 2018-12-05T20:58:33.195Z,1544043513.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T20:58:33.196Z,1544043513.196 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:58:33.196Z,1544043513.196 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:58:33.196Z,1544043513.196 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T20:58:33.197Z,1544043513.197 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T20:58:33.197Z,1544043513.197 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T20:58:34.409Z,1544043514.409 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T20:58:34.409Z,1544043514.409 [NAL9602] No Fault, FailCount= 5 2018-12-05T20:58:34.772Z,1544043514.772 [NAL9602](INFO): Powering up NAL9602 2018-12-05T20:58:45.972Z,1544043525.972 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:00:33.283Z,1544043633.283 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:00:33.283Z,1544043633.283 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58 2018-12-05T21:00:33.283Z,1544043633.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:00:33.285Z,1544043633.285 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:00:33.286Z,1544043633.286 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 58 2018-12-05T21:00:33.286Z,1544043633.286 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:00:33.299Z,1544043633.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:00:33.299Z,1544043633.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:00:33.707Z,1544043633.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:00:33.707Z,1544043633.707 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58 2018-12-05T21:00:33.708Z,1544043633.708 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:00:33.708Z,1544043633.708 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 58 2018-12-05T21:00:34.082Z,1544043634.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:00:34.087Z,1544043634.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:00:34.087Z,1544043634.087 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:00:34.087Z,1544043634.087 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:00:34.088Z,1544043634.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:00:34.088Z,1544043634.088 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:01:22.891Z,1544043682.891 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T20:56:21.9Z 2018-12-05T21:01:22.891Z,1544043682.891 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T21:01:22.891Z,1544043682.891 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T21:01:27.857Z,1544043687.857 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181203T211451/Courier0831.lzma 2018-12-05T21:01:28.649Z,1544043688.649 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0831.lzma.bak 2018-12-05T21:01:28.650Z,1544043688.650 [DataOverHttps](INFO): SBD MOMSN=8970302 2018-12-05T21:01:38.901Z,1544043698.901 [DataOverHttps](INFO): Sending 308 bytes from file Logs/20181203T211451/Express0832.lzma 2018-12-05T21:01:39.673Z,1544043699.673 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0832.lzma.bak 2018-12-05T21:01:39.673Z,1544043699.673 [DataOverHttps](INFO): SBD MOMSN=8970305 2018-12-05T21:01:41.065Z,1544043701.065 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T21:01:41.065Z,1544043701.065 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T21:01:41.065Z,1544043701.065 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T21:02:34.381Z,1544043754.381 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:02:34.381Z,1544043754.381 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59 2018-12-05T21:02:34.382Z,1544043754.382 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:02:34.384Z,1544043754.384 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:02:34.384Z,1544043754.384 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 59 2018-12-05T21:02:34.384Z,1544043754.384 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:02:34.399Z,1544043754.399 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:02:34.399Z,1544043754.399 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:02:34.801Z,1544043754.801 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:02:34.801Z,1544043754.801 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59 2018-12-05T21:02:34.802Z,1544043754.802 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:02:34.802Z,1544043754.802 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 59 2018-12-05T21:02:35.165Z,1544043755.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:02:35.166Z,1544043755.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:02:35.166Z,1544043755.166 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:02:35.166Z,1544043755.166 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:02:35.167Z,1544043755.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:02:35.167Z,1544043755.167 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:03:49.188Z,1544043829.188 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T21:04:19.932Z,1544043859.932 [NAL9602](INFO): Powering down 2018-12-05T21:04:35.572Z,1544043875.572 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:04:35.572Z,1544043875.572 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60 2018-12-05T21:04:35.572Z,1544043875.572 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:04:35.574Z,1544043875.574 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:04:35.575Z,1544043875.575 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 60 2018-12-05T21:04:35.575Z,1544043875.575 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:04:35.588Z,1544043875.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:04:35.588Z,1544043875.588 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:04:35.995Z,1544043875.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:04:35.995Z,1544043875.995 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60 2018-12-05T21:04:35.995Z,1544043875.995 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:04:35.995Z,1544043875.995 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 60 2018-12-05T21:04:36.348Z,1544043876.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:04:36.348Z,1544043876.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:04:36.349Z,1544043876.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:04:36.349Z,1544043876.349 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:04:36.349Z,1544043876.349 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:04:36.350Z,1544043876.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:06:36.370Z,1544043996.370 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:06:36.370Z,1544043996.370 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61 2018-12-05T21:06:36.370Z,1544043996.370 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:06:36.372Z,1544043996.372 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:06:36.372Z,1544043996.372 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 61 2018-12-05T21:06:36.372Z,1544043996.372 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:06:36.385Z,1544043996.385 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:06:36.385Z,1544043996.385 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:06:36.787Z,1544043996.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:06:36.787Z,1544043996.787 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61 2018-12-05T21:06:36.787Z,1544043996.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:06:36.788Z,1544043996.788 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 61 2018-12-05T21:06:37.170Z,1544043997.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:06:37.170Z,1544043997.170 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:06:37.171Z,1544043997.171 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:06:37.171Z,1544043997.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:06:37.171Z,1544043997.171 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:06:37.172Z,1544043997.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:06:41.174Z,1544044001.174 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T21:06:41.174Z,1544044001.174 [Default:CheckIn:C.Wait] Stopped 2018-12-05T21:06:41.175Z,1544044001.175 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T21:06:41.175Z,1544044001.175 [Default:CheckIn:D] Running Loop=1 2018-12-05T21:06:41.577Z,1544044001.577 [Default:CheckIn:D] Stopped 2018-12-05T21:06:41.577Z,1544044001.577 [Default:CheckIn:E] Running Loop=1 2018-12-05T21:06:41.982Z,1544044001.982 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2871.826042 min 2018-12-05T21:06:41.982Z,1544044001.982 [Default:CheckIn:E] Stopped 2018-12-05T21:06:41.982Z,1544044001.982 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T21:06:41.982Z,1544044001.982 [Default:CheckIn] Stopped 2018-12-05T21:06:41.983Z,1544044001.983 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T21:06:41.983Z,1544044001.983 [Default:CheckIn](INFO): Running loop #279 2018-12-05T21:06:41.983Z,1544044001.983 [Default:CheckIn] Running Loop=279 2018-12-05T21:06:41.983Z,1544044001.983 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T21:06:41.983Z,1544044001.983 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T21:06:42.748Z,1544044002.748 [NAL9602](INFO): Powering up 2018-12-05T21:06:53.948Z,1544044013.948 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:07:25.924Z,1544044045.924 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T21:07:26.006Z,1544044046.006 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T21:07:26.006Z,1544044046.006 [NAL9602] Data Fault, FailCount= 1 2018-12-05T21:07:26.006Z,1544044046.006 [NAL9602](ERROR): Data Fault 2018-12-05T21:07:26.069Z,1544044046.069 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T21:07:26.328Z,1544044046.328 [NAL9602](INFO): Powering down 2018-12-05T21:07:27.165Z,1544044047.165 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T21:07:27.165Z,1544044047.165 [NAL9602] No Fault, FailCount= 1 2018-12-05T21:07:37.879Z,1544044057.879 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T21:07:37.879Z,1544044057.879 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T21:07:37.879Z,1544044057.879 [DropWeight](ERROR): Hardware Fault 2018-12-05T21:07:37.932Z,1544044057.932 [CBIT](INFO): Critical error at 20181205T210737 2018-12-05T21:07:37.934Z,1544044057.934 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T21:07:37.935Z,1544044057.935 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T21:07:38.315Z,1544044058.315 [CBIT](INFO): Critical error at 20181205T210737 2018-12-05T21:07:56.679Z,1544044076.679 [NAL9602](INFO): Powering up NAL9602 2018-12-05T21:08:07.880Z,1544044087.880 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:08:37.239Z,1544044117.239 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:08:37.239Z,1544044117.239 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62 2018-12-05T21:08:37.239Z,1544044117.239 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:08:37.241Z,1544044117.241 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:08:37.241Z,1544044117.241 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 62 2018-12-05T21:08:37.241Z,1544044117.241 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:08:37.255Z,1544044117.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:08:37.255Z,1544044117.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:08:37.642Z,1544044117.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:08:37.643Z,1544044117.643 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62 2018-12-05T21:08:37.643Z,1544044117.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:08:37.643Z,1544044117.643 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 62 2018-12-05T21:08:38.026Z,1544044118.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:08:38.026Z,1544044118.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:08:38.027Z,1544044118.027 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:08:38.027Z,1544044118.027 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:08:38.028Z,1544044118.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:08:38.028Z,1544044118.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:10:38.407Z,1544044238.407 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:10:38.407Z,1544044238.407 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63 2018-12-05T21:10:38.407Z,1544044238.407 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:10:38.409Z,1544044238.409 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:10:38.409Z,1544044238.409 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 63 2018-12-05T21:10:38.409Z,1544044238.409 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:10:38.423Z,1544044238.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:10:38.423Z,1544044238.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:10:38.839Z,1544044238.839 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:10:38.839Z,1544044238.839 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63 2018-12-05T21:10:38.839Z,1544044238.839 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:10:38.839Z,1544044238.839 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 63 2018-12-05T21:10:39.204Z,1544044239.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:10:39.205Z,1544044239.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:10:39.205Z,1544044239.205 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:10:39.205Z,1544044239.205 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:10:39.206Z,1544044239.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:10:39.206Z,1544044239.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:11:43.237Z,1544044303.237 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T21:06:41.0Z 2018-12-05T21:11:43.237Z,1544044303.237 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T21:11:43.237Z,1544044303.237 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T21:11:48.178Z,1544044308.178 [DataOverHttps](INFO): Sending 102 bytes from file Logs/20181203T211451/Courier0834.lzma 2018-12-05T21:11:48.969Z,1544044308.969 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0834.lzma.bak 2018-12-05T21:11:48.969Z,1544044308.969 [DataOverHttps](INFO): SBD MOMSN=8970320 2018-12-05T21:11:58.919Z,1544044318.919 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T21:11:58.987Z,1544044318.987 [DataOverHttps](INFO): Sending 328 bytes from file Logs/20181203T211451/Express0835.lzma 2018-12-05T21:11:59.785Z,1544044319.785 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0835.lzma.bak 2018-12-05T21:11:59.785Z,1544044319.785 [DataOverHttps](INFO): SBD MOMSN=8970324 2018-12-05T21:12:01.214Z,1544044321.214 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T21:12:01.214Z,1544044321.214 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T21:12:01.214Z,1544044321.214 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T21:12:29.189Z,1544044349.189 [NAL9602](INFO): Powering down 2018-12-05T21:12:39.903Z,1544044359.903 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:12:39.903Z,1544044359.903 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64 2018-12-05T21:12:39.903Z,1544044359.903 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:12:39.905Z,1544044359.905 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:12:39.905Z,1544044359.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 64 2018-12-05T21:12:39.905Z,1544044359.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:12:39.971Z,1544044359.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:12:39.972Z,1544044359.972 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:12:40.040Z,1544044360.040 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:12:40.040Z,1544044360.040 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64 2018-12-05T21:12:40.041Z,1544044360.041 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:12:40.041Z,1544044360.041 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 64 2018-12-05T21:12:40.425Z,1544044360.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:12:40.425Z,1544044360.425 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:12:40.426Z,1544044360.426 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:12:40.426Z,1544044360.426 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:12:40.427Z,1544044360.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:12:40.427Z,1544044360.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:14:40.541Z,1544044480.541 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:14:40.541Z,1544044480.541 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 65 2018-12-05T21:14:40.541Z,1544044480.541 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:14:40.543Z,1544044480.543 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:14:40.543Z,1544044480.543 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 65 2018-12-05T21:14:40.543Z,1544044480.543 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:14:40.557Z,1544044480.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:14:40.558Z,1544044480.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:14:40.959Z,1544044480.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:14:40.959Z,1544044480.959 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 65 2018-12-05T21:14:40.959Z,1544044480.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:14:40.959Z,1544044480.959 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 65 2018-12-05T21:14:41.348Z,1544044481.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:14:41.349Z,1544044481.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:14:41.349Z,1544044481.349 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:14:41.350Z,1544044481.350 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:14:41.350Z,1544044481.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:14:41.350Z,1544044481.350 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:16:41.672Z,1544044601.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:16:41.672Z,1544044601.672 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 66 2018-12-05T21:16:41.672Z,1544044601.672 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:16:41.674Z,1544044601.674 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:16:41.674Z,1544044601.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 66 2018-12-05T21:16:41.674Z,1544044601.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:16:41.688Z,1544044601.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:16:41.688Z,1544044601.688 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:16:42.086Z,1544044602.086 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:16:42.086Z,1544044602.086 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 66 2018-12-05T21:16:42.087Z,1544044602.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:16:42.087Z,1544044602.087 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 66 2018-12-05T21:16:42.466Z,1544044602.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:16:42.467Z,1544044602.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:16:42.467Z,1544044602.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:16:42.468Z,1544044602.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:16:42.468Z,1544044602.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:16:42.468Z,1544044602.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:17:01.369Z,1544044621.369 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T21:17:01.369Z,1544044621.369 [Default:CheckIn:C.Wait] Stopped 2018-12-05T21:17:01.369Z,1544044621.369 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T21:17:01.369Z,1544044621.369 [Default:CheckIn:D] Running Loop=1 2018-12-05T21:17:01.770Z,1544044621.770 [Default:CheckIn:D] Stopped 2018-12-05T21:17:01.770Z,1544044621.770 [Default:CheckIn:E] Running Loop=1 2018-12-05T21:17:02.171Z,1544044622.171 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2882.162500 min 2018-12-05T21:17:02.172Z,1544044622.172 [Default:CheckIn:E] Stopped 2018-12-05T21:17:02.172Z,1544044622.172 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T21:17:02.172Z,1544044622.172 [Default:CheckIn] Stopped 2018-12-05T21:17:02.172Z,1544044622.172 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T21:17:02.172Z,1544044622.172 [Default:CheckIn](INFO): Running loop #280 2018-12-05T21:17:02.172Z,1544044622.172 [Default:CheckIn] Running Loop=280 2018-12-05T21:17:02.172Z,1544044622.172 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T21:17:02.172Z,1544044622.172 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T21:17:02.947Z,1544044622.947 [NAL9602](INFO): Powering up 2018-12-05T21:17:14.140Z,1544044634.140 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:17:14.939Z,1544044634.939 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T21:17:14.939Z,1544044634.939 [NAL9602] Data Fault, FailCount= 2 2018-12-05T21:17:14.939Z,1544044634.939 [NAL9602](ERROR): Data Fault 2018-12-05T21:17:14.000Z,1544044635.000 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T21:17:15.339Z,1544044635.339 [NAL9602](INFO): Powering down 2018-12-05T21:17:16.197Z,1544044636.197 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T21:17:16.197Z,1544044636.197 [NAL9602] No Fault, FailCount= 2 2018-12-05T21:17:45.503Z,1544044665.503 [NAL9602](INFO): Powering up NAL9602 2018-12-05T21:17:57.571Z,1544044677.571 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:18:42.773Z,1544044722.773 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:18:42.773Z,1544044722.773 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 67 2018-12-05T21:18:42.774Z,1544044722.774 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:18:42.776Z,1544044722.776 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:18:42.776Z,1544044722.776 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 67 2018-12-05T21:18:42.776Z,1544044722.776 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:18:42.811Z,1544044722.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:18:42.811Z,1544044722.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:18:43.213Z,1544044723.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:18:43.213Z,1544044723.213 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 67 2018-12-05T21:18:43.214Z,1544044723.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:18:43.214Z,1544044723.214 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 67 2018-12-05T21:18:43.569Z,1544044723.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:18:43.570Z,1544044723.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:18:43.570Z,1544044723.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:18:43.571Z,1544044723.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:18:43.571Z,1544044723.571 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:18:43.571Z,1544044723.571 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:20:43.655Z,1544044843.655 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:20:43.656Z,1544044843.656 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 68 2018-12-05T21:20:43.656Z,1544044843.656 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:20:43.658Z,1544044843.658 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:20:43.658Z,1544044843.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 68 2018-12-05T21:20:43.658Z,1544044843.658 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:20:43.671Z,1544044843.671 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:20:43.672Z,1544044843.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:20:44.067Z,1544044844.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:20:44.067Z,1544044844.067 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 68 2018-12-05T21:20:44.067Z,1544044844.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:20:44.067Z,1544044844.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 68 2018-12-05T21:20:44.454Z,1544044844.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:20:44.455Z,1544044844.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:20:44.455Z,1544044844.455 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:20:44.455Z,1544044844.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:20:44.456Z,1544044844.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:20:44.456Z,1544044844.456 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:22:03.666Z,1544044923.666 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T21:17:02.2Z 2018-12-05T21:22:03.667Z,1544044923.667 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T21:22:03.667Z,1544044923.667 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T21:22:08.618Z,1544044928.618 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0837.lzma 2018-12-05T21:22:09.424Z,1544044929.424 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0837.lzma.bak 2018-12-05T21:22:09.424Z,1544044929.424 [DataOverHttps](INFO): SBD MOMSN=8970339 2018-12-05T21:22:19.088Z,1544044939.088 [DataOverHttps](INFO): Sending 304 bytes from file Logs/20181203T211451/Express0838.lzma 2018-12-05T21:22:19.885Z,1544044939.885 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0838.lzma.bak 2018-12-05T21:22:19.885Z,1544044939.885 [DataOverHttps](INFO): SBD MOMSN=8970341 2018-12-05T21:22:21.264Z,1544044941.264 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T21:22:21.264Z,1544044941.264 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T21:22:21.264Z,1544044941.264 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T21:22:38.153Z,1544044958.153 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T21:22:38.153Z,1544044958.153 [DropWeight] No Fault, FailCount= 1 2018-12-05T21:22:44.522Z,1544044964.522 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:22:44.522Z,1544044964.522 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 69 2018-12-05T21:22:44.522Z,1544044964.522 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:22:44.524Z,1544044964.524 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:22:44.524Z,1544044964.524 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 69 2018-12-05T21:22:44.525Z,1544044964.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:22:44.574Z,1544044964.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:22:44.574Z,1544044964.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:22:44.927Z,1544044964.927 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:22:44.928Z,1544044964.928 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 69 2018-12-05T21:22:44.928Z,1544044964.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:22:44.928Z,1544044964.928 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 69 2018-12-05T21:22:45.322Z,1544044965.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:22:45.322Z,1544044965.322 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:22:45.323Z,1544044965.323 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:22:45.323Z,1544044965.323 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:22:45.324Z,1544044965.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:22:45.324Z,1544044965.324 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:23:00.873Z,1544044980.873 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T21:23:31.668Z,1544045011.668 [NAL9602](INFO): Powering down 2018-12-05T21:24:45.790Z,1544045085.790 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:24:45.790Z,1544045085.790 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 70 2018-12-05T21:24:45.790Z,1544045085.790 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:24:45.792Z,1544045085.792 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:24:45.792Z,1544045085.792 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 70 2018-12-05T21:24:45.793Z,1544045085.793 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:24:45.806Z,1544045085.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:24:45.807Z,1544045085.807 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:24:45.922Z,1544045085.922 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:24:45.922Z,1544045085.922 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 70 2018-12-05T21:24:45.923Z,1544045085.923 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:24:45.923Z,1544045085.923 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 70 2018-12-05T21:24:46.244Z,1544045086.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:24:46.245Z,1544045086.245 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:24:46.245Z,1544045086.245 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:24:46.246Z,1544045086.246 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:24:46.246Z,1544045086.246 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:24:46.247Z,1544045086.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:26:46.283Z,1544045206.283 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:26:46.283Z,1544045206.283 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 71 2018-12-05T21:26:46.283Z,1544045206.283 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:26:46.286Z,1544045206.286 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:26:46.286Z,1544045206.286 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 71 2018-12-05T21:26:46.286Z,1544045206.286 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:26:46.304Z,1544045206.304 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:26:46.305Z,1544045206.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:26:46.709Z,1544045206.709 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:26:46.709Z,1544045206.709 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 71 2018-12-05T21:26:46.710Z,1544045206.710 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:26:46.710Z,1544045206.710 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 71 2018-12-05T21:26:47.090Z,1544045207.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:26:47.091Z,1544045207.091 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:26:47.091Z,1544045207.091 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:26:47.091Z,1544045207.091 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:26:47.092Z,1544045207.092 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:26:47.092Z,1544045207.092 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:27:21.542Z,1544045241.542 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T21:27:21.543Z,1544045241.543 [Default:CheckIn:C.Wait] Stopped 2018-12-05T21:27:21.543Z,1544045241.543 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T21:27:21.543Z,1544045241.543 [Default:CheckIn:D] Running Loop=1 2018-12-05T21:27:21.950Z,1544045241.950 [Default:CheckIn:D] Stopped 2018-12-05T21:27:21.950Z,1544045241.950 [Default:CheckIn:E] Running Loop=1 2018-12-05T21:27:22.348Z,1544045242.348 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2892.498698 min 2018-12-05T21:27:22.348Z,1544045242.348 [Default:CheckIn:E] Stopped 2018-12-05T21:27:22.348Z,1544045242.348 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T21:27:22.348Z,1544045242.348 [Default:CheckIn] Stopped 2018-12-05T21:27:22.348Z,1544045242.348 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T21:27:22.348Z,1544045242.348 [Default:CheckIn](INFO): Running loop #281 2018-12-05T21:27:22.348Z,1544045242.348 [Default:CheckIn] Running Loop=281 2018-12-05T21:27:22.349Z,1544045242.349 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T21:27:22.349Z,1544045242.349 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T21:27:23.119Z,1544045243.119 [NAL9602](INFO): Powering up 2018-12-05T21:27:34.324Z,1544045254.324 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:28:47.186Z,1544045327.186 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:28:47.186Z,1544045327.186 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 72 2018-12-05T21:28:47.187Z,1544045327.187 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:28:47.189Z,1544045327.189 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:28:47.189Z,1544045327.189 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 72 2018-12-05T21:28:47.189Z,1544045327.189 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:28:47.239Z,1544045327.239 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:28:47.240Z,1544045327.240 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:28:47.591Z,1544045327.591 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:28:47.591Z,1544045327.591 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 72 2018-12-05T21:28:47.592Z,1544045327.592 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:28:47.592Z,1544045327.592 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 72 2018-12-05T21:28:47.980Z,1544045327.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:28:47.980Z,1544045327.980 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:28:47.981Z,1544045327.981 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:28:47.981Z,1544045327.981 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:28:47.982Z,1544045327.982 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:28:47.982Z,1544045327.982 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:30:48.265Z,1544045448.265 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:30:48.266Z,1544045448.266 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 73 2018-12-05T21:30:48.266Z,1544045448.266 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:30:48.268Z,1544045448.268 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:30:48.268Z,1544045448.268 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 73 2018-12-05T21:30:48.268Z,1544045448.268 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:30:48.298Z,1544045448.298 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:30:48.299Z,1544045448.299 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:30:48.683Z,1544045448.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:30:48.683Z,1544045448.683 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 73 2018-12-05T21:30:48.683Z,1544045448.683 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:30:48.683Z,1544045448.683 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 73 2018-12-05T21:30:49.062Z,1544045449.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:30:49.063Z,1544045449.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:30:49.063Z,1544045449.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:30:49.063Z,1544045449.063 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:30:49.064Z,1544045449.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:30:49.064Z,1544045449.064 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:32:23.886Z,1544045543.886 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T21:27:22.3Z 2018-12-05T21:32:23.886Z,1544045543.886 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T21:32:23.887Z,1544045543.887 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T21:32:28.921Z,1544045548.921 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0840.lzma 2018-12-05T21:32:29.713Z,1544045549.713 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0840.lzma.bak 2018-12-05T21:32:29.713Z,1544045549.713 [DataOverHttps](INFO): SBD MOMSN=8970356 2018-12-05T21:32:39.117Z,1544045559.117 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T21:32:39.220Z,1544045559.220 [DataOverHttps](INFO): Sending 291 bytes from file Logs/20181203T211451/Express0841.lzma 2018-12-05T21:32:39.999Z,1544045559.999 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0841.lzma.bak 2018-12-05T21:32:39.999Z,1544045559.999 [DataOverHttps](INFO): SBD MOMSN=8970358 2018-12-05T21:32:41.587Z,1544045561.587 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T21:32:41.587Z,1544045561.587 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T21:32:41.587Z,1544045561.587 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T21:32:49.269Z,1544045569.269 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:32:49.269Z,1544045569.269 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 74 2018-12-05T21:32:49.269Z,1544045569.269 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:32:49.271Z,1544045569.271 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:32:49.271Z,1544045569.271 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 74 2018-12-05T21:32:49.272Z,1544045569.272 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:32:49.286Z,1544045569.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:32:49.286Z,1544045569.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:32:49.688Z,1544045569.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:32:49.688Z,1544045569.688 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 74 2018-12-05T21:32:49.688Z,1544045569.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:32:49.688Z,1544045569.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 74 2018-12-05T21:32:50.074Z,1544045570.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:32:50.074Z,1544045570.074 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:32:50.075Z,1544045570.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:32:50.075Z,1544045570.075 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:32:50.075Z,1544045570.075 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:32:50.076Z,1544045570.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:33:09.643Z,1544045589.643 [NAL9602](INFO): Powering down 2018-12-05T21:33:32.970Z,1544045612.970 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T21:34:50.453Z,1544045690.453 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:34:50.453Z,1544045690.453 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 75 2018-12-05T21:34:50.453Z,1544045690.453 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:34:50.455Z,1544045690.455 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:34:50.455Z,1544045690.455 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 75 2018-12-05T21:34:50.455Z,1544045690.455 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:34:50.468Z,1544045690.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:34:50.469Z,1544045690.469 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:34:50.878Z,1544045690.878 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:34:50.878Z,1544045690.878 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 75 2018-12-05T21:34:50.879Z,1544045690.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:34:50.879Z,1544045690.879 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 75 2018-12-05T21:34:51.262Z,1544045691.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:34:51.262Z,1544045691.262 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:34:51.263Z,1544045691.263 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:34:51.263Z,1544045691.263 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:34:51.263Z,1544045691.263 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:34:51.264Z,1544045691.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:36:51.792Z,1544045811.792 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:36:51.793Z,1544045811.793 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 76 2018-12-05T21:36:51.793Z,1544045811.793 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:36:51.795Z,1544045811.795 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:36:51.795Z,1544045811.795 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 76 2018-12-05T21:36:51.795Z,1544045811.795 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:36:51.808Z,1544045811.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:36:51.808Z,1544045811.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:36:51.926Z,1544045811.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:36:51.926Z,1544045811.926 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 76 2018-12-05T21:36:51.927Z,1544045811.927 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:36:51.927Z,1544045811.927 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 76 2018-12-05T21:36:52.255Z,1544045812.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:36:52.256Z,1544045812.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:36:52.256Z,1544045812.256 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:36:52.256Z,1544045812.256 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:36:52.257Z,1544045812.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:36:52.257Z,1544045812.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:37:41.795Z,1544045861.795 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T21:37:41.796Z,1544045861.796 [Default:CheckIn:C.Wait] Stopped 2018-12-05T21:37:41.796Z,1544045861.796 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T21:37:41.796Z,1544045861.796 [Default:CheckIn:D] Running Loop=1 2018-12-05T21:37:42.220Z,1544045862.220 [Default:CheckIn:D] Stopped 2018-12-05T21:37:42.220Z,1544045862.220 [Default:CheckIn:E] Running Loop=1 2018-12-05T21:37:42.595Z,1544045862.595 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2902.836719 min 2018-12-05T21:37:42.595Z,1544045862.595 [Default:CheckIn:E] Stopped 2018-12-05T21:37:42.595Z,1544045862.595 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T21:37:42.595Z,1544045862.595 [Default:CheckIn] Stopped 2018-12-05T21:37:42.595Z,1544045862.595 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T21:37:42.596Z,1544045862.596 [Default:CheckIn](INFO): Running loop #282 2018-12-05T21:37:42.596Z,1544045862.596 [Default:CheckIn] Running Loop=282 2018-12-05T21:37:42.596Z,1544045862.596 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T21:37:42.596Z,1544045862.596 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T21:37:43.375Z,1544045863.375 [NAL9602](INFO): Powering up 2018-12-05T21:37:54.576Z,1544045874.576 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:37:55.384Z,1544045875.384 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T21:37:55.384Z,1544045875.384 [NAL9602] Data Fault, FailCount= 3 2018-12-05T21:37:55.384Z,1544045875.384 [NAL9602](ERROR): Data Fault 2018-12-05T21:37:55.470Z,1544045875.470 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T21:37:55.776Z,1544045875.776 [NAL9602](INFO): Powering down 2018-12-05T21:37:56.637Z,1544045876.637 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T21:37:56.637Z,1544045876.637 [NAL9602] No Fault, FailCount= 3 2018-12-05T21:38:26.145Z,1544045906.145 [NAL9602](INFO): Powering up NAL9602 2018-12-05T21:38:37.700Z,1544045917.700 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:38:52.543Z,1544045932.543 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:38:52.543Z,1544045932.543 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 77 2018-12-05T21:38:52.543Z,1544045932.543 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:38:52.545Z,1544045932.545 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:38:52.546Z,1544045932.546 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 77 2018-12-05T21:38:52.546Z,1544045932.546 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:38:52.559Z,1544045932.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:38:52.559Z,1544045932.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:38:52.962Z,1544045932.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:38:52.962Z,1544045932.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 77 2018-12-05T21:38:52.963Z,1544045932.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:38:52.963Z,1544045932.963 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 77 2018-12-05T21:38:53.326Z,1544045933.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:38:53.326Z,1544045933.326 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:38:53.327Z,1544045933.327 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:38:53.327Z,1544045933.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:38:53.327Z,1544045933.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:38:53.328Z,1544045933.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:40:53.535Z,1544046053.535 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:40:53.535Z,1544046053.535 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 78 2018-12-05T21:40:53.535Z,1544046053.535 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:40:53.538Z,1544046053.538 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:40:53.538Z,1544046053.538 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 78 2018-12-05T21:40:53.538Z,1544046053.538 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:40:53.585Z,1544046053.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:40:53.585Z,1544046053.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:40:53.974Z,1544046053.974 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:40:53.974Z,1544046053.974 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 78 2018-12-05T21:40:53.975Z,1544046053.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:40:53.975Z,1544046053.975 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 78 2018-12-05T21:40:54.350Z,1544046054.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:40:54.365Z,1544046054.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:40:54.365Z,1544046054.365 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:40:54.366Z,1544046054.366 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:40:54.367Z,1544046054.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:40:54.367Z,1544046054.367 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:42:43.959Z,1544046163.959 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T21:37:42.6Z 2018-12-05T21:42:43.959Z,1544046163.959 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T21:42:43.959Z,1544046163.959 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T21:42:48.925Z,1544046168.925 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181203T211451/Courier0843.lzma 2018-12-05T21:42:49.717Z,1544046169.717 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0843.lzma.bak 2018-12-05T21:42:49.718Z,1544046169.718 [DataOverHttps](INFO): SBD MOMSN=8970372 2018-12-05T21:42:54.378Z,1544046174.378 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:42:54.379Z,1544046174.379 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 79 2018-12-05T21:42:54.379Z,1544046174.379 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:42:54.381Z,1544046174.381 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:42:54.381Z,1544046174.381 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 79 2018-12-05T21:42:54.381Z,1544046174.381 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:42:54.411Z,1544046174.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:42:54.411Z,1544046174.411 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:42:54.743Z,1544046174.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:42:54.743Z,1544046174.743 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 79 2018-12-05T21:42:54.744Z,1544046174.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:42:54.744Z,1544046174.744 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 79 2018-12-05T21:42:55.126Z,1544046175.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:42:55.126Z,1544046175.126 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:42:55.127Z,1544046175.127 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:42:55.127Z,1544046175.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:42:55.127Z,1544046175.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:42:55.128Z,1544046175.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:42:59.552Z,1544046179.552 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0844.lzma 2018-12-05T21:43:00.353Z,1544046180.353 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0844.lzma.bak 2018-12-05T21:43:00.353Z,1544046180.353 [DataOverHttps](INFO): SBD MOMSN=8970374 2018-12-05T21:43:01.834Z,1544046181.834 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T21:43:01.834Z,1544046181.834 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T21:43:01.834Z,1544046181.834 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T21:43:40.549Z,1544046220.549 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T21:44:11.023Z,1544046251.023 [NAL9602](INFO): Powering down 2018-12-05T21:44:55.486Z,1544046295.486 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:44:55.486Z,1544046295.486 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 80 2018-12-05T21:44:55.486Z,1544046295.486 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:44:55.488Z,1544046295.488 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:44:55.488Z,1544046295.488 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 80 2018-12-05T21:44:55.489Z,1544046295.489 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:44:55.502Z,1544046295.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:44:55.502Z,1544046295.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:44:55.895Z,1544046295.895 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:44:55.895Z,1544046295.895 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 80 2018-12-05T21:44:55.896Z,1544046295.896 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:44:55.896Z,1544046295.896 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 80 2018-12-05T21:44:56.290Z,1544046296.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:44:56.290Z,1544046296.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:44:56.291Z,1544046296.291 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:44:56.291Z,1544046296.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:44:56.291Z,1544046296.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:44:56.292Z,1544046296.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:46:56.667Z,1544046416.667 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:46:56.667Z,1544046416.667 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 81 2018-12-05T21:46:56.667Z,1544046416.667 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:46:56.669Z,1544046416.669 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:46:56.669Z,1544046416.669 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 81 2018-12-05T21:46:56.669Z,1544046416.669 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:46:56.683Z,1544046416.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:46:56.683Z,1544046416.683 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:46:57.095Z,1544046417.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:46:57.095Z,1544046417.095 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 81 2018-12-05T21:46:57.095Z,1544046417.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:46:57.095Z,1544046417.095 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 81 2018-12-05T21:46:57.462Z,1544046417.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:46:57.463Z,1544046417.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:46:57.463Z,1544046417.463 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:46:57.464Z,1544046417.464 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:46:57.464Z,1544046417.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:46:57.464Z,1544046417.464 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:48:02.302Z,1544046482.302 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T21:48:02.302Z,1544046482.302 [Default:CheckIn:C.Wait] Stopped 2018-12-05T21:48:02.302Z,1544046482.302 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T21:48:02.302Z,1544046482.302 [Default:CheckIn:D] Running Loop=1 2018-12-05T21:48:02.694Z,1544046482.694 [Default:CheckIn:D] Stopped 2018-12-05T21:48:02.694Z,1544046482.694 [Default:CheckIn:E] Running Loop=1 2018-12-05T21:48:03.102Z,1544046483.102 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2913.177865 min 2018-12-05T21:48:03.102Z,1544046483.102 [Default:CheckIn:E] Stopped 2018-12-05T21:48:03.102Z,1544046483.102 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T21:48:03.103Z,1544046483.103 [Default:CheckIn] Stopped 2018-12-05T21:48:03.103Z,1544046483.103 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T21:48:03.103Z,1544046483.103 [Default:CheckIn](INFO): Running loop #283 2018-12-05T21:48:03.103Z,1544046483.103 [Default:CheckIn] Running Loop=283 2018-12-05T21:48:03.103Z,1544046483.103 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T21:48:03.103Z,1544046483.103 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T21:48:03.867Z,1544046483.867 [NAL9602](INFO): Powering up 2018-12-05T21:48:15.072Z,1544046495.072 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:48:46.736Z,1544046526.736 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T21:48:46.819Z,1544046526.819 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T21:48:46.819Z,1544046526.819 [NAL9602] Data Fault, FailCount= 4 2018-12-05T21:48:46.819Z,1544046526.819 [NAL9602](ERROR): Data Fault 2018-12-05T21:48:46.889Z,1544046526.889 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T21:48:47.136Z,1544046527.136 [NAL9602](INFO): Powering down 2018-12-05T21:48:47.980Z,1544046527.980 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T21:48:47.980Z,1544046527.980 [NAL9602] No Fault, FailCount= 4 2018-12-05T21:48:57.558Z,1544046537.558 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:48:57.559Z,1544046537.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 82 2018-12-05T21:48:57.559Z,1544046537.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:48:57.561Z,1544046537.561 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:48:57.561Z,1544046537.561 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 82 2018-12-05T21:48:57.561Z,1544046537.561 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:48:57.602Z,1544046537.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:48:57.602Z,1544046537.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:48:57.935Z,1544046537.935 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:48:57.935Z,1544046537.935 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 82 2018-12-05T21:48:57.936Z,1544046537.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:48:57.936Z,1544046537.936 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 82 2018-12-05T21:48:58.318Z,1544046538.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:48:58.332Z,1544046538.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:48:58.332Z,1544046538.332 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:48:58.333Z,1544046538.333 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:48:58.333Z,1544046538.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:48:58.333Z,1544046538.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:49:17.490Z,1544046557.490 [NAL9602](INFO): Powering up NAL9602 2018-12-05T21:49:28.292Z,1544046568.292 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:49:29.096Z,1544046569.096 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T21:49:29.096Z,1544046569.096 [NAL9602] Data Fault, FailCount= 5 2018-12-05T21:49:29.096Z,1544046569.096 [NAL9602](ERROR): Data Fault 2018-12-05T21:49:29.163Z,1544046569.163 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T21:49:29.163Z,1544046569.163 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T21:49:29.492Z,1544046569.492 [NAL9602](INFO): Powering down 2018-12-05T21:49:29.559Z,1544046569.559 [CBIT](INFO): Critical error at 20181205T214929 2018-12-05T21:50:58.367Z,1544046658.367 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:50:58.367Z,1544046658.367 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 83 2018-12-05T21:50:58.367Z,1544046658.367 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:50:58.369Z,1544046658.369 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:50:58.369Z,1544046658.369 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 83 2018-12-05T21:50:58.370Z,1544046658.370 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:50:58.383Z,1544046658.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:50:58.383Z,1544046658.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:50:58.791Z,1544046658.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:50:58.791Z,1544046658.791 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 83 2018-12-05T21:50:58.791Z,1544046658.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:50:58.791Z,1544046658.791 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 83 2018-12-05T21:50:59.174Z,1544046659.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:50:59.175Z,1544046659.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:50:59.175Z,1544046659.175 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:50:59.176Z,1544046659.176 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:50:59.176Z,1544046659.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:50:59.176Z,1544046659.176 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:51:29.293Z,1544046689.293 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T21:51:29.293Z,1544046689.293 [NAL9602] No Fault, FailCount= 5 2018-12-05T21:51:29.648Z,1544046689.648 [NAL9602](INFO): Powering up NAL9602 2018-12-05T21:51:40.848Z,1544046700.848 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:52:39.603Z,1544046759.603 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T21:52:39.603Z,1544046759.603 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T21:52:39.603Z,1544046759.603 [DropWeight](ERROR): Hardware Fault 2018-12-05T21:52:39.667Z,1544046759.667 [CBIT](INFO): Critical error at 20181205T215239 2018-12-05T21:52:39.670Z,1544046759.670 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T21:52:39.675Z,1544046759.675 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T21:52:40.046Z,1544046760.046 [CBIT](INFO): Critical error at 20181205T215239 2018-12-05T21:52:59.234Z,1544046779.234 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:52:59.234Z,1544046779.234 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 84 2018-12-05T21:52:59.234Z,1544046779.234 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:52:59.236Z,1544046779.236 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:52:59.236Z,1544046779.236 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 84 2018-12-05T21:52:59.237Z,1544046779.237 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:52:59.250Z,1544046779.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:52:59.250Z,1544046779.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:52:59.641Z,1544046779.641 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:52:59.641Z,1544046779.641 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 84 2018-12-05T21:52:59.642Z,1544046779.642 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:52:59.642Z,1544046779.642 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 84 2018-12-05T21:53:00.038Z,1544046780.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:53:00.039Z,1544046780.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:53:00.039Z,1544046780.039 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:53:00.039Z,1544046780.039 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:53:00.040Z,1544046780.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:53:00.040Z,1544046780.040 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:53:03.947Z,1544046783.947 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T21:48:03.1Z 2018-12-05T21:53:03.947Z,1544046783.947 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T21:53:03.947Z,1544046783.947 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T21:53:08.977Z,1544046788.977 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181203T211451/Courier0846.lzma 2018-12-05T21:53:09.769Z,1544046789.769 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0846.lzma.bak 2018-12-05T21:53:09.769Z,1544046789.769 [DataOverHttps](INFO): SBD MOMSN=8970389 2018-12-05T21:53:19.590Z,1544046799.590 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T21:53:19.674Z,1544046799.674 [DataOverHttps](INFO): Sending 355 bytes from file Logs/20181203T211451/Express0847.lzma 2018-12-05T21:53:20.437Z,1544046800.437 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0847.lzma.bak 2018-12-05T21:53:20.437Z,1544046800.437 [DataOverHttps](INFO): SBD MOMSN=8970394 2018-12-05T21:53:21.973Z,1544046801.973 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T21:53:21.974Z,1544046801.974 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T21:53:21.974Z,1544046801.974 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T21:53:50.039Z,1544046830.039 [NAL9602](INFO): Powering down 2018-12-05T21:55:00.054Z,1544046900.054 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:55:00.055Z,1544046900.055 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 85 2018-12-05T21:55:00.055Z,1544046900.055 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:55:00.057Z,1544046900.057 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:55:00.057Z,1544046900.057 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 85 2018-12-05T21:55:00.057Z,1544046900.057 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:55:00.071Z,1544046900.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:55:00.071Z,1544046900.071 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:55:00.465Z,1544046900.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:55:00.465Z,1544046900.465 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 85 2018-12-05T21:55:00.466Z,1544046900.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:55:00.466Z,1544046900.466 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 85 2018-12-05T21:55:00.854Z,1544046900.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:55:00.854Z,1544046900.854 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:55:00.855Z,1544046900.855 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:55:00.855Z,1544046900.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:55:00.855Z,1544046900.855 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:55:00.856Z,1544046900.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:57:01.018Z,1544047021.018 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:57:01.018Z,1544047021.018 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 86 2018-12-05T21:57:01.018Z,1544047021.018 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:57:01.020Z,1544047021.020 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:57:01.020Z,1544047021.020 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 86 2018-12-05T21:57:01.021Z,1544047021.021 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:57:01.034Z,1544047021.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:57:01.034Z,1544047021.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:57:01.434Z,1544047021.434 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:57:01.434Z,1544047021.434 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 86 2018-12-05T21:57:01.435Z,1544047021.435 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:57:01.435Z,1544047021.435 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 86 2018-12-05T21:57:01.813Z,1544047021.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:57:01.813Z,1544047021.813 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:57:01.814Z,1544047021.814 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:57:01.814Z,1544047021.814 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:57:01.815Z,1544047021.815 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:57:01.815Z,1544047021.815 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:58:22.136Z,1544047102.136 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T21:58:22.137Z,1544047102.137 [Default:CheckIn:C.Wait] Stopped 2018-12-05T21:58:22.137Z,1544047102.137 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T21:58:22.137Z,1544047102.137 [Default:CheckIn:D] Running Loop=1 2018-12-05T21:58:22.539Z,1544047102.539 [Default:CheckIn:D] Stopped 2018-12-05T21:58:22.539Z,1544047102.539 [Default:CheckIn:E] Running Loop=1 2018-12-05T21:58:22.944Z,1544047102.944 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2923.508594 min 2018-12-05T21:58:22.945Z,1544047102.945 [Default:CheckIn:E] Stopped 2018-12-05T21:58:22.945Z,1544047102.945 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T21:58:22.945Z,1544047102.945 [Default:CheckIn] Stopped 2018-12-05T21:58:22.945Z,1544047102.945 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T21:58:22.945Z,1544047102.945 [Default:CheckIn](INFO): Running loop #284 2018-12-05T21:58:22.945Z,1544047102.945 [Default:CheckIn] Running Loop=284 2018-12-05T21:58:22.945Z,1544047102.945 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T21:58:22.945Z,1544047102.945 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T21:58:23.711Z,1544047103.711 [NAL9602](INFO): Powering up 2018-12-05T21:58:34.908Z,1544047114.908 [NAL9602](INFO): NAL9602 initialized 2018-12-05T21:59:02.083Z,1544047142.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:59:02.083Z,1544047142.083 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 87 2018-12-05T21:59:02.083Z,1544047142.083 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T21:59:02.085Z,1544047142.085 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T21:59:02.085Z,1544047142.085 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 87 2018-12-05T21:59:02.085Z,1544047142.085 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T21:59:02.131Z,1544047142.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T21:59:02.131Z,1544047142.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T21:59:02.506Z,1544047142.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T21:59:02.506Z,1544047142.506 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 87 2018-12-05T21:59:02.507Z,1544047142.507 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T21:59:02.507Z,1544047142.507 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 87 2018-12-05T21:59:02.894Z,1544047142.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T21:59:02.895Z,1544047142.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:59:02.895Z,1544047142.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:59:02.895Z,1544047142.895 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T21:59:02.896Z,1544047142.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T21:59:02.896Z,1544047142.896 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T21:59:06.863Z,1544047146.863 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T21:59:06.950Z,1544047146.950 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T21:59:06.950Z,1544047146.950 [NAL9602] Data Fault, FailCount= 1 2018-12-05T21:59:06.951Z,1544047146.951 [NAL9602](ERROR): Data Fault 2018-12-05T21:59:07.046Z,1544047147.046 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T21:59:07.263Z,1544047147.263 [NAL9602](INFO): Powering down 2018-12-05T21:59:08.104Z,1544047148.104 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T21:59:08.105Z,1544047148.105 [NAL9602] No Fault, FailCount= 1 2018-12-05T21:59:37.623Z,1544047177.623 [NAL9602](INFO): Powering up NAL9602 2018-12-05T21:59:48.824Z,1544047188.824 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:01:03.403Z,1544047263.403 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:01:03.403Z,1544047263.403 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 88 2018-12-05T22:01:03.403Z,1544047263.403 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:01:03.405Z,1544047263.405 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:01:03.406Z,1544047263.406 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 88 2018-12-05T22:01:03.406Z,1544047263.406 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:01:03.420Z,1544047263.420 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:01:03.420Z,1544047263.420 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:01:03.528Z,1544047263.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:01:03.528Z,1544047263.528 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 88 2018-12-05T22:01:03.528Z,1544047263.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:01:03.529Z,1544047263.529 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 88 2018-12-05T22:01:03.869Z,1544047263.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:01:03.869Z,1544047263.869 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:01:03.869Z,1544047263.869 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:01:03.870Z,1544047263.870 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:01:03.871Z,1544047263.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:01:03.871Z,1544047263.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:03:03.931Z,1544047383.931 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:03:03.931Z,1544047383.931 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 89 2018-12-05T22:03:03.931Z,1544047383.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:03:03.933Z,1544047383.933 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:03:03.933Z,1544047383.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 89 2018-12-05T22:03:03.933Z,1544047383.933 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:03:03.947Z,1544047383.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:03:03.947Z,1544047383.947 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:03:04.350Z,1544047384.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:03:04.350Z,1544047384.350 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 89 2018-12-05T22:03:04.350Z,1544047384.350 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:03:04.351Z,1544047384.351 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 89 2018-12-05T22:03:04.734Z,1544047384.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:03:04.735Z,1544047384.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:03:04.735Z,1544047384.735 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:03:04.735Z,1544047384.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:03:04.736Z,1544047384.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:03:04.736Z,1544047384.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:03:24.287Z,1544047404.287 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T21:58:22.9Z 2018-12-05T22:03:24.287Z,1544047404.287 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T22:03:24.287Z,1544047404.287 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T22:03:29.255Z,1544047409.255 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0849.lzma 2018-12-05T22:03:30.053Z,1544047410.053 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0849.lzma.bak 2018-12-05T22:03:30.053Z,1544047410.053 [DataOverHttps](INFO): SBD MOMSN=8970412 2018-12-05T22:03:39.833Z,1544047419.833 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T22:03:39.907Z,1544047419.907 [DataOverHttps](INFO): Sending 324 bytes from file Logs/20181203T211451/Express0850.lzma 2018-12-05T22:03:40.705Z,1544047420.705 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0850.lzma.bak 2018-12-05T22:03:40.705Z,1544047420.705 [DataOverHttps](INFO): SBD MOMSN=8970414 2018-12-05T22:03:42.085Z,1544047422.085 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T22:03:42.085Z,1544047422.085 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T22:03:42.085Z,1544047422.085 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T22:04:10.071Z,1544047450.071 [NAL9602](INFO): Powering down 2018-12-05T22:05:04.852Z,1544047504.852 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:05:04.852Z,1544047504.852 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 90 2018-12-05T22:05:04.852Z,1544047504.852 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:05:04.854Z,1544047504.854 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:05:04.855Z,1544047504.855 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 90 2018-12-05T22:05:04.855Z,1544047504.855 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:05:04.868Z,1544047504.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:05:04.868Z,1544047504.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:05:05.289Z,1544047505.289 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:05:05.289Z,1544047505.289 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 90 2018-12-05T22:05:05.290Z,1544047505.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:05:05.290Z,1544047505.290 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 90 2018-12-05T22:05:05.654Z,1544047505.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:05:05.655Z,1544047505.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:05:05.655Z,1544047505.655 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:05:05.656Z,1544047505.656 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:05:05.656Z,1544047505.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:05:05.656Z,1544047505.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:07:05.662Z,1544047625.662 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:07:05.662Z,1544047625.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 91 2018-12-05T22:07:05.662Z,1544047625.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:07:05.664Z,1544047625.664 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:07:05.664Z,1544047625.664 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 91 2018-12-05T22:07:05.664Z,1544047625.664 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:07:05.678Z,1544047625.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:07:05.678Z,1544047625.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:07:06.074Z,1544047626.074 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:07:06.074Z,1544047626.074 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 91 2018-12-05T22:07:06.075Z,1544047626.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:07:06.075Z,1544047626.075 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 91 2018-12-05T22:07:06.474Z,1544047626.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:07:06.477Z,1544047626.477 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:07:06.477Z,1544047626.477 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:07:06.477Z,1544047626.477 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:07:06.478Z,1544047626.478 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:07:06.478Z,1544047626.478 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:07:39.641Z,1544047659.641 [CBIT](INFO): Clearing failed state for component DropWeight 2018-12-05T22:07:39.641Z,1544047659.641 [DropWeight] No Fault, FailCount= 1 2018-12-05T22:08:42.390Z,1544047722.390 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T22:08:42.390Z,1544047722.390 [Default:CheckIn:C.Wait] Stopped 2018-12-05T22:08:42.390Z,1544047722.390 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T22:08:42.390Z,1544047722.390 [Default:CheckIn:D] Running Loop=1 2018-12-05T22:08:42.782Z,1544047722.782 [Default:CheckIn:D] Stopped 2018-12-05T22:08:42.783Z,1544047722.783 [Default:CheckIn:E] Running Loop=1 2018-12-05T22:08:43.190Z,1544047723.190 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2933.846094 min 2018-12-05T22:08:43.190Z,1544047723.190 [Default:CheckIn:E] Stopped 2018-12-05T22:08:43.190Z,1544047723.190 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T22:08:43.191Z,1544047723.191 [Default:CheckIn] Stopped 2018-12-05T22:08:43.191Z,1544047723.191 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T22:08:43.191Z,1544047723.191 [Default:CheckIn](INFO): Running loop #285 2018-12-05T22:08:43.191Z,1544047723.191 [Default:CheckIn] Running Loop=285 2018-12-05T22:08:43.191Z,1544047723.191 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T22:08:43.191Z,1544047723.191 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T22:08:43.955Z,1544047723.955 [NAL9602](INFO): Powering up 2018-12-05T22:08:55.156Z,1544047735.156 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:08:55.956Z,1544047735.956 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T22:08:55.956Z,1544047735.956 [NAL9602] Data Fault, FailCount= 2 2018-12-05T22:08:55.956Z,1544047735.956 [NAL9602](ERROR): Data Fault 2018-12-05T22:08:56.013Z,1544047736.013 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T22:08:56.355Z,1544047736.355 [NAL9602](INFO): Powering down 2018-12-05T22:08:57.200Z,1544047737.200 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T22:08:57.200Z,1544047737.200 [NAL9602] No Fault, FailCount= 2 2018-12-05T22:09:06.850Z,1544047746.850 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:09:06.850Z,1544047746.850 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 92 2018-12-05T22:09:06.850Z,1544047746.850 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:09:06.852Z,1544047746.852 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:09:06.852Z,1544047746.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 92 2018-12-05T22:09:06.853Z,1544047746.853 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:09:06.866Z,1544047746.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:09:06.866Z,1544047746.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:09:07.258Z,1544047747.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:09:07.258Z,1544047747.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 92 2018-12-05T22:09:07.259Z,1544047747.259 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:09:07.259Z,1544047747.259 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 92 2018-12-05T22:09:07.647Z,1544047747.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:09:07.647Z,1544047747.647 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:09:07.648Z,1544047747.648 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:09:07.648Z,1544047747.648 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:09:07.648Z,1544047747.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:09:07.649Z,1544047747.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:09:26.418Z,1544047766.418 [NAL9602](INFO): Powering up NAL9602 2018-12-05T22:09:37.972Z,1544047777.972 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:11:07.930Z,1544047867.930 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:11:07.930Z,1544047867.930 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 93 2018-12-05T22:11:07.931Z,1544047867.931 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:11:07.933Z,1544047867.933 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:11:07.933Z,1544047867.933 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 93 2018-12-05T22:11:07.933Z,1544047867.933 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:11:07.946Z,1544047867.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:11:07.946Z,1544047867.946 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:11:08.342Z,1544047868.342 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:11:08.342Z,1544047868.342 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 93 2018-12-05T22:11:08.343Z,1544047868.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:11:08.343Z,1544047868.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 93 2018-12-05T22:11:08.729Z,1544047868.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:11:08.729Z,1544047868.729 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:11:08.730Z,1544047868.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:11:08.730Z,1544047868.730 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:11:08.731Z,1544047868.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:11:08.731Z,1544047868.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:13:08.827Z,1544047988.827 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:13:08.827Z,1544047988.827 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 94 2018-12-05T22:13:08.827Z,1544047988.827 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:13:08.829Z,1544047988.829 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:13:08.829Z,1544047988.829 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 94 2018-12-05T22:13:08.829Z,1544047988.829 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:13:08.876Z,1544047988.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:13:08.876Z,1544047988.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:13:09.237Z,1544047989.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:13:09.237Z,1544047989.237 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 94 2018-12-05T22:13:09.238Z,1544047989.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:13:09.238Z,1544047989.238 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 94 2018-12-05T22:13:09.626Z,1544047989.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:13:09.626Z,1544047989.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:13:09.627Z,1544047989.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:13:09.627Z,1544047989.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:13:09.628Z,1544047989.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:13:09.628Z,1544047989.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:13:43.921Z,1544048023.921 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T22:08:43.2Z 2018-12-05T22:13:43.921Z,1544048023.921 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T22:13:43.922Z,1544048023.922 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T22:13:49.203Z,1544048029.203 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0852.lzma 2018-12-05T22:13:50.001Z,1544048030.001 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0852.lzma.bak 2018-12-05T22:13:50.001Z,1544048030.001 [DataOverHttps](INFO): SBD MOMSN=8970546 2018-12-05T22:13:59.374Z,1544048039.374 [DataOverHttps](INFO): Sending 305 bytes from file Logs/20181203T211451/Express0853.lzma 2018-12-05T22:14:00.177Z,1544048040.177 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0853.lzma.bak 2018-12-05T22:14:00.177Z,1544048040.177 [DataOverHttps](INFO): SBD MOMSN=8970548 2018-12-05T22:14:01.721Z,1544048041.721 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T22:14:01.721Z,1544048041.721 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T22:14:01.721Z,1544048041.721 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T22:14:40.996Z,1544048080.996 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T22:15:09.824Z,1544048109.824 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:15:09.824Z,1544048109.824 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 95 2018-12-05T22:15:09.824Z,1544048109.824 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:15:09.826Z,1544048109.826 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:15:09.826Z,1544048109.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 95 2018-12-05T22:15:09.826Z,1544048109.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:15:09.839Z,1544048109.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:15:09.839Z,1544048109.839 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:15:10.238Z,1544048110.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:15:10.238Z,1544048110.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 95 2018-12-05T22:15:10.239Z,1544048110.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:15:10.239Z,1544048110.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 95 2018-12-05T22:15:10.626Z,1544048110.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:15:10.626Z,1544048110.626 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:15:10.627Z,1544048110.627 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:15:10.627Z,1544048110.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:15:10.627Z,1544048110.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:15:10.628Z,1544048110.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:15:11.795Z,1544048111.795 [NAL9602](INFO): Powering down 2018-12-05T22:17:10.990Z,1544048230.990 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:17:10.991Z,1544048230.991 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 96 2018-12-05T22:17:10.991Z,1544048230.991 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:17:10.993Z,1544048230.993 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:17:10.993Z,1544048230.993 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 96 2018-12-05T22:17:10.993Z,1544048230.993 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:17:11.006Z,1544048231.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:17:11.006Z,1544048231.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:17:11.408Z,1544048231.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:17:11.408Z,1544048231.408 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 96 2018-12-05T22:17:11.409Z,1544048231.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:17:11.409Z,1544048231.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 96 2018-12-05T22:17:11.793Z,1544048231.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:17:11.794Z,1544048231.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:17:11.794Z,1544048231.794 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:17:11.794Z,1544048231.794 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:17:11.795Z,1544048231.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:17:11.795Z,1544048231.795 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:19:02.202Z,1544048342.202 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T22:19:02.202Z,1544048342.202 [Default:CheckIn:C.Wait] Stopped 2018-12-05T22:19:02.202Z,1544048342.202 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T22:19:02.202Z,1544048342.202 [Default:CheckIn:D] Running Loop=1 2018-12-05T22:19:02.595Z,1544048342.595 [Default:CheckIn:D] Stopped 2018-12-05T22:19:02.596Z,1544048342.596 [Default:CheckIn:E] Running Loop=1 2018-12-05T22:19:02.997Z,1544048342.997 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2944.176302 min 2018-12-05T22:19:02.997Z,1544048342.997 [Default:CheckIn:E] Stopped 2018-12-05T22:19:02.997Z,1544048342.997 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T22:19:02.997Z,1544048342.997 [Default:CheckIn] Stopped 2018-12-05T22:19:02.997Z,1544048342.997 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T22:19:02.998Z,1544048342.998 [Default:CheckIn](INFO): Running loop #286 2018-12-05T22:19:02.998Z,1544048342.998 [Default:CheckIn] Running Loop=286 2018-12-05T22:19:02.998Z,1544048342.998 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T22:19:02.998Z,1544048342.998 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T22:19:03.765Z,1544048343.765 [NAL9602](INFO): Powering up 2018-12-05T22:19:11.798Z,1544048351.798 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:19:11.799Z,1544048351.799 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 97 2018-12-05T22:19:11.799Z,1544048351.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:19:11.801Z,1544048351.801 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:19:11.801Z,1544048351.801 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 97 2018-12-05T22:19:11.801Z,1544048351.801 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:19:11.814Z,1544048351.814 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:19:11.815Z,1544048351.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:19:12.210Z,1544048352.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:19:12.210Z,1544048352.210 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 97 2018-12-05T22:19:12.210Z,1544048352.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:19:12.211Z,1544048352.211 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 97 2018-12-05T22:19:12.594Z,1544048352.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:19:12.594Z,1544048352.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:19:12.594Z,1544048352.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:19:12.595Z,1544048352.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:19:12.595Z,1544048352.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:19:12.596Z,1544048352.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:19:14.986Z,1544048354.986 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:19:46.979Z,1544048386.979 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T22:19:47.062Z,1544048387.062 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T22:19:47.062Z,1544048387.062 [NAL9602] Data Fault, FailCount= 3 2018-12-05T22:19:47.062Z,1544048387.062 [NAL9602](ERROR): Data Fault 2018-12-05T22:19:47.140Z,1544048387.140 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T22:19:47.348Z,1544048387.348 [NAL9602](INFO): Powering down 2018-12-05T22:19:48.216Z,1544048388.216 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T22:19:48.216Z,1544048388.216 [NAL9602] No Fault, FailCount= 3 2018-12-05T22:20:17.677Z,1544048417.677 [NAL9602](INFO): Powering up NAL9602 2018-12-05T22:20:28.880Z,1544048428.880 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:20:32.520Z,1544048432.520 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T22:20:32.520Z,1544048432.520 [NAL9602] Data Fault, FailCount= 4 2018-12-05T22:20:32.520Z,1544048432.520 [NAL9602](ERROR): Data Fault 2018-12-05T22:20:32.597Z,1544048432.597 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T22:20:32.644Z,1544048432.644 [NAL9602](INFO): Powering down 2018-12-05T22:20:33.459Z,1544048433.459 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T22:20:33.459Z,1544048433.459 [NAL9602] No Fault, FailCount= 4 2018-12-05T22:21:03.020Z,1544048463.020 [NAL9602](INFO): Powering up NAL9602 2018-12-05T22:21:12.650Z,1544048472.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:21:12.650Z,1544048472.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 98 2018-12-05T22:21:12.650Z,1544048472.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:21:12.652Z,1544048472.652 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:21:12.652Z,1544048472.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 98 2018-12-05T22:21:12.652Z,1544048472.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:21:12.665Z,1544048472.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:21:12.666Z,1544048472.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:21:13.071Z,1544048473.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:21:13.071Z,1544048473.071 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 98 2018-12-05T22:21:13.072Z,1544048473.072 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:21:13.072Z,1544048473.072 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 98 2018-12-05T22:21:13.466Z,1544048473.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:21:13.467Z,1544048473.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:21:13.467Z,1544048473.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:21:13.467Z,1544048473.467 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:21:13.468Z,1544048473.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:21:13.468Z,1544048473.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:21:13.828Z,1544048473.828 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:23:13.842Z,1544048593.842 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:23:13.843Z,1544048593.843 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 99 2018-12-05T22:23:13.843Z,1544048593.843 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:23:13.845Z,1544048593.845 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:23:13.845Z,1544048593.845 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 99 2018-12-05T22:23:13.845Z,1544048593.845 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:23:13.879Z,1544048593.879 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:23:13.879Z,1544048593.879 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:23:14.258Z,1544048594.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:23:14.258Z,1544048594.258 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 99 2018-12-05T22:23:14.259Z,1544048594.259 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:23:14.259Z,1544048594.259 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 99 2018-12-05T22:23:14.642Z,1544048594.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:23:14.643Z,1544048594.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:23:14.643Z,1544048594.643 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:23:14.644Z,1544048594.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:23:14.644Z,1544048594.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:23:14.644Z,1544048594.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:24:03.921Z,1544048643.921 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T22:19:02.0Z 2018-12-05T22:24:03.921Z,1544048643.921 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T22:24:03.921Z,1544048643.921 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T22:24:08.900Z,1544048648.900 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181203T211451/Courier0855.lzma 2018-12-05T22:24:09.693Z,1544048649.693 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0855.lzma.bak 2018-12-05T22:24:09.693Z,1544048649.693 [DataOverHttps](INFO): SBD MOMSN=8970563 2018-12-05T22:24:19.012Z,1544048659.012 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T22:24:19.097Z,1544048659.097 [DataOverHttps](INFO): Sending 345 bytes from file Logs/20181203T211451/Express0856.lzma 2018-12-05T22:24:19.869Z,1544048659.869 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0856.lzma.bak 2018-12-05T22:24:19.869Z,1544048659.869 [DataOverHttps](INFO): SBD MOMSN=8970565 2018-12-05T22:24:21.342Z,1544048661.342 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T22:24:21.342Z,1544048661.342 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T22:24:21.343Z,1544048661.343 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T22:24:49.316Z,1544048689.316 [NAL9602](INFO): Powering down 2018-12-05T22:25:14.920Z,1544048714.920 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:25:14.920Z,1544048714.920 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 100 2018-12-05T22:25:14.920Z,1544048714.920 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:25:14.922Z,1544048714.922 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:25:14.922Z,1544048714.922 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 100 2018-12-05T22:25:14.922Z,1544048714.922 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:25:14.937Z,1544048714.937 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:25:14.938Z,1544048714.938 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:25:14.938Z,1544048714.938 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:25:14.938Z,1544048714.938 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:29:21.719Z,1544048961.719 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T22:29:21.719Z,1544048961.719 [Default:CheckIn:C.Wait] Stopped 2018-12-05T22:29:21.719Z,1544048961.719 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T22:29:21.719Z,1544048961.719 [Default:CheckIn:D] Running Loop=1 2018-12-05T22:29:22.120Z,1544048962.120 [Default:CheckIn:D] Stopped 2018-12-05T22:29:22.120Z,1544048962.120 [Default:CheckIn:E] Running Loop=1 2018-12-05T22:29:22.513Z,1544048962.513 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2954.501563 min 2018-12-05T22:29:22.513Z,1544048962.513 [Default:CheckIn:E] Stopped 2018-12-05T22:29:22.513Z,1544048962.513 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T22:29:22.513Z,1544048962.513 [Default:CheckIn] Stopped 2018-12-05T22:29:22.514Z,1544048962.514 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T22:29:22.514Z,1544048962.514 [Default:CheckIn](INFO): Running loop #287 2018-12-05T22:29:22.514Z,1544048962.514 [Default:CheckIn] Running Loop=287 2018-12-05T22:29:22.514Z,1544048962.514 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T22:29:22.514Z,1544048962.514 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T22:29:23.288Z,1544048963.288 [NAL9602](INFO): Powering up 2018-12-05T22:29:34.488Z,1544048974.488 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:30:06.452Z,1544049006.452 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check. 2018-12-05T22:30:06.526Z,1544049006.526 [NAL9602](FAULT): received: +CSQ:0 OK 2, 0, 0, 0 OK 2018-12-05T22:30:06.526Z,1544049006.526 [NAL9602] Data Fault, FailCount= 5 2018-12-05T22:30:06.526Z,1544049006.526 [NAL9602](ERROR): Data Fault 2018-12-05T22:30:06.566Z,1544049006.566 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T22:30:06.566Z,1544049006.566 [CBIT](CRITICAL): Data Fault in component: NAL9602 2018-12-05T22:30:06.848Z,1544049006.848 [NAL9602](INFO): Powering down 2018-12-05T22:30:06.914Z,1544049006.914 [CBIT](INFO): Critical error at 20181205T223006 2018-12-05T22:32:06.832Z,1544049126.832 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T22:32:06.832Z,1544049126.832 [NAL9602] No Fault, FailCount= 5 2018-12-05T22:32:07.196Z,1544049127.196 [NAL9602](INFO): Powering up NAL9602 2018-12-05T22:32:18.392Z,1544049138.392 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:32:19.192Z,1544049139.192 [NAL9602](FAULT): GPS failed to acquire within timeout. 2018-12-05T22:32:19.192Z,1544049139.192 [NAL9602] Data Fault, FailCount= 1 2018-12-05T22:32:19.192Z,1544049139.192 [NAL9602](ERROR): Data Fault 2018-12-05T22:32:19.255Z,1544049139.255 [CBIT](ERROR): Data Fault in component: NAL9602 2018-12-05T22:32:19.592Z,1544049139.592 [NAL9602](INFO): Powering down 2018-12-05T22:32:20.433Z,1544049140.433 [CBIT](INFO): Clearing failed state for component NAL9602 2018-12-05T22:32:20.434Z,1544049140.434 [NAL9602] No Fault, FailCount= 1 2018-12-05T22:32:49.942Z,1544049169.942 [NAL9602](INFO): Powering up NAL9602 2018-12-05T22:33:00.744Z,1544049180.744 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:34:23.142Z,1544049263.142 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T22:29:22.5Z 2018-12-05T22:34:23.143Z,1544049263.143 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T22:34:23.143Z,1544049263.143 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T22:34:28.070Z,1544049268.070 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181203T211451/Courier0858.lzma 2018-12-05T22:34:28.869Z,1544049268.869 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0858.lzma.bak 2018-12-05T22:34:28.869Z,1544049268.869 [DataOverHttps](INFO): SBD MOMSN=8970655 2018-12-05T22:34:38.998Z,1544049278.998 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T22:34:39.074Z,1544049279.074 [DataOverHttps](INFO): Sending 379 bytes from file Logs/20181203T211451/Express0859.lzma 2018-12-05T22:34:39.873Z,1544049279.873 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0859.lzma.bak 2018-12-05T22:34:39.874Z,1544049279.874 [DataOverHttps](INFO): SBD MOMSN=8970658 2018-12-05T22:34:41.294Z,1544049281.294 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T22:34:41.294Z,1544049281.294 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T22:34:41.295Z,1544049281.295 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T22:35:09.328Z,1544049309.328 [NAL9602](INFO): Powering down 2018-12-05T22:37:41.516Z,1544049461.516 [DropWeight](CRITICAL): DROP WEIGHT MISSING. 2018-12-05T22:37:41.516Z,1544049461.516 [DropWeight] Hardware Fault, FailCount= 1 2018-12-05T22:37:41.516Z,1544049461.516 [DropWeight](ERROR): Hardware Fault 2018-12-05T22:37:41.588Z,1544049461.588 [CBIT](INFO): Critical error at 20181205T223741 2018-12-05T22:37:41.590Z,1544049461.590 [CBIT](ERROR): Hardware Fault in component: DropWeight 2018-12-05T22:37:41.591Z,1544049461.591 [CBIT](CRITICAL): Hardware Fault in component: DropWeight 2018-12-05T22:37:41.989Z,1544049461.989 [CBIT](INFO): Critical error at 20181205T223741 2018-12-05T22:39:41.783Z,1544049581.783 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T22:39:41.783Z,1544049581.783 [Default:CheckIn:C.Wait] Stopped 2018-12-05T22:39:41.783Z,1544049581.783 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T22:39:41.783Z,1544049581.783 [Default:CheckIn:D] Running Loop=1 2018-12-05T22:39:42.183Z,1544049582.183 [Default:CheckIn:D] Stopped 2018-12-05T22:39:42.183Z,1544049582.183 [Default:CheckIn:E] Running Loop=1 2018-12-05T22:39:42.583Z,1544049582.583 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2964.835938 min 2018-12-05T22:39:42.583Z,1544049582.583 [Default:CheckIn:E] Stopped 2018-12-05T22:39:42.584Z,1544049582.584 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T22:39:42.584Z,1544049582.584 [Default:CheckIn] Stopped 2018-12-05T22:39:42.584Z,1544049582.584 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T22:39:42.584Z,1544049582.584 [Default:CheckIn](INFO): Running loop #288 2018-12-05T22:39:42.584Z,1544049582.584 [Default:CheckIn] Running Loop=288 2018-12-05T22:39:42.584Z,1544049582.584 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn 2018-12-05T22:39:42.584Z,1544049582.584 [Default:CheckIn:Read_GPS] Running Loop=1 2018-12-05T22:39:43.355Z,1544049583.355 [NAL9602](INFO): Powering up 2018-12-05T22:39:54.552Z,1544049594.552 [NAL9602](INFO): NAL9602 initialized 2018-12-05T22:40:15.057Z,1544049615.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:40:15.057Z,1544049615.057 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 100 2018-12-05T22:40:15.058Z,1544049615.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:40:15.058Z,1544049615.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 100 2018-12-05T22:40:15.444Z,1544049615.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:40:15.445Z,1544049615.445 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:40:15.445Z,1544049615.445 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:40:15.445Z,1544049615.445 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:40:15.446Z,1544049615.446 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:40:15.446Z,1544049615.446 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:41:03.474Z,1544049663.474 [BPC1](INFO): Calculating totals. Valid battery stick count: 56. Valid reserve battery stick count: 6. 2018-12-05T22:42:15.601Z,1544049735.601 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:42:15.601Z,1544049735.601 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1 2018-12-05T22:42:15.601Z,1544049735.601 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:42:15.603Z,1544049735.603 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:42:15.603Z,1544049735.603 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1 2018-12-05T22:42:15.603Z,1544049735.603 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:42:15.618Z,1544049735.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:42:15.618Z,1544049735.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:42:16.011Z,1544049736.011 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:42:16.011Z,1544049736.011 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1 2018-12-05T22:42:16.012Z,1544049736.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:42:16.012Z,1544049736.012 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1 2018-12-05T22:42:16.378Z,1544049736.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:42:16.378Z,1544049736.378 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:42:16.379Z,1544049736.379 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:42:16.379Z,1544049736.379 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:42:16.380Z,1544049736.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:42:16.380Z,1544049736.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:44:16.416Z,1544049856.416 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:44:16.416Z,1544049856.416 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2 2018-12-05T22:44:16.416Z,1544049856.416 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:44:16.419Z,1544049856.419 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:44:16.419Z,1544049856.419 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2 2018-12-05T22:44:16.419Z,1544049856.419 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:44:16.432Z,1544049856.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:44:16.432Z,1544049856.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:44:16.840Z,1544049856.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:44:16.840Z,1544049856.840 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2 2018-12-05T22:44:16.841Z,1544049856.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:44:16.841Z,1544049856.841 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2 2018-12-05T22:44:17.210Z,1544049857.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:44:17.211Z,1544049857.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:44:17.211Z,1544049857.211 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:44:17.211Z,1544049857.211 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:44:17.212Z,1544049857.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:44:17.212Z,1544049857.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:44:44.087Z,1544049884.087 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-12-05T22:39:42.6Z 2018-12-05T22:44:44.087Z,1544049884.087 [Default:CheckIn:Read_GPS] Stopped 2018-12-05T22:44:44.087Z,1544049884.087 [Default:CheckIn:Read_Iridium] Running Loop=1 2018-12-05T22:44:49.157Z,1544049889.157 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20181203T211451/Courier0861.lzma 2018-12-05T22:44:49.957Z,1544049889.957 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Courier0861.lzma.bak 2018-12-05T22:44:49.957Z,1544049889.957 [DataOverHttps](INFO): SBD MOMSN=8970668 2018-12-05T22:44:59.465Z,1544049899.465 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2018-12-05T22:44:59.537Z,1544049899.537 [DataOverHttps](INFO): Sending 261 bytes from file Logs/20181203T211451/Express0862.lzma 2018-12-05T22:45:00.321Z,1544049900.321 [DataOverHttps](INFO): Moved sent file to Logs/20181203T211451/Express0862.lzma.bak 2018-12-05T22:45:00.321Z,1544049900.321 [DataOverHttps](INFO): SBD MOMSN=8970672 2018-12-05T22:45:01.754Z,1544049901.754 [Default:CheckIn:Read_Iridium] Stopped 2018-12-05T22:45:01.754Z,1544049901.754 [Default:CheckIn:C.Wait] Running Loop=1 2018-12-05T22:45:01.754Z,1544049901.754 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component. 2018-12-05T22:45:29.867Z,1544049929.867 [NAL9602](INFO): Powering down 2018-12-05T22:46:17.530Z,1544049977.530 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:46:17.531Z,1544049977.531 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3 2018-12-05T22:46:17.531Z,1544049977.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:46:17.533Z,1544049977.533 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:46:17.533Z,1544049977.533 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3 2018-12-05T22:46:17.533Z,1544049977.533 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:46:17.546Z,1544049977.546 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:46:17.547Z,1544049977.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:46:17.942Z,1544049977.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:46:17.942Z,1544049977.942 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3 2018-12-05T22:46:17.943Z,1544049977.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:46:17.943Z,1544049977.943 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3 2018-12-05T22:46:18.338Z,1544049978.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:46:18.338Z,1544049978.338 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:46:18.339Z,1544049978.339 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:46:18.339Z,1544049978.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:46:18.340Z,1544049978.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:46:18.340Z,1544049978.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:48:18.458Z,1544050098.458 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:48:18.458Z,1544050098.458 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4 2018-12-05T22:48:18.458Z,1544050098.458 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault 2018-12-05T22:48:18.460Z,1544050098.460 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2018-12-05T22:48:18.460Z,1544050098.460 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4 2018-12-05T22:48:18.461Z,1544050098.461 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault 2018-12-05T22:48:18.475Z,1544050098.475 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2018-12-05T22:48:18.475Z,1544050098.475 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator 2018-12-05T22:48:18.864Z,1544050098.864 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources 2018-12-05T22:48:18.864Z,1544050098.864 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4 2018-12-05T22:48:18.865Z,1544050098.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator 2018-12-05T22:48:18.865Z,1544050098.865 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4 2018-12-05T22:48:19.253Z,1544050099.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component. 2018-12-05T22:48:19.253Z,1544050099.253 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:48:19.254Z,1544050099.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:48:19.254Z,1544050099.254 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component. 2018-12-05T22:48:19.255Z,1544050099.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s. 2018-12-05T22:48:19.255Z,1544050099.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s. 2018-12-05T22:50:02.123Z,1544050202.123 [Default:CheckIn:C.Wait](INFO): Done Waiting. 2018-12-05T22:50:02.123Z,1544050202.123 [Default:CheckIn:C.Wait] Stopped 2018-12-05T22:50:02.123Z,1544050202.123 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component. 2018-12-05T22:50:02.123Z,1544050202.123 [Default:CheckIn:D] Running Loop=1 2018-12-05T22:50:02.525Z,1544050202.525 [Default:CheckIn:D] Stopped 2018-12-05T22:50:02.525Z,1544050202.525 [Default:CheckIn:E] Running Loop=1 2018-12-05T22:50:02.916Z,1544050202.916 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 2975.175000 min 2018-12-05T22:50:02.916Z,1544050202.916 [Default:CheckIn:E] Stopped 2018-12-05T22:50:02.916Z,1544050202.916 [Default:CheckIn](INFO): Completed Default:CheckIn 2018-12-05T22:50:02.916Z,1544050202.916 [Default:CheckIn] Stopped 2018-12-05T22:50:02.916Z,1544050202.916 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn 2018-12-05T22:50:02.916Z,1544050202.916 [Default:D] Running Loop=1 2018-12-05T22:50:03.324Z,1544050203.324 [Default:D](IMPORTANT): Restarting logs and Default mission. 2018-12-05T22:50:03.324Z,1544050203.324 [Default:D] Stopped 2018-12-05T22:50:03.324Z,1544050203.324 [Default:E.Execute] Running Loop=1 2018-12-05T22:50:03.714Z,1544050203.714 [Default:E.Execute](INFO): Executing command restart logs