galene Path

trajectory

20181029T234626 [CBIT]:Environmental Failure. Press:0.000000 PSI. Humidity:57%. Temp:19 C. ABORTING MISSION

20181029T234650 [DeadReckonUsingMultipleVelocitySources]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20181029T234650 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20181029T234650 [DeadReckonUsingSpeedCalculator]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20181029T234650 [DeadReckonUsingSpeedCalculator]:Software Fault

20181029T234650 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20181029T234650 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20181029T234712 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 5#Latitude: 36.802891 Longitude: -121.788086

20181029T234712 [IBIT]:Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.

20181029T234714 [IBIT]:bitPressureThreshold: 0.750000 psi

20181029T234714 [IBIT]:Could not read pressure

20181029T234714 [IBIT]:Humidity failed. Onboard reading:63.746799 %

20181029T234811 [CBIT]:Humidity exceeds 50% of running average: Humidity:67 %. Average:44.549999

20181029T234814 [NAL9602]:Failed to initiate SBD session. Error code: 2

20181029T234851 [DeadReckonUsingMultipleVelocitySources]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20181029T234851 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20181029T234851 [DeadReckonUsingSpeedCalculator]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20181029T234851 [DeadReckonUsingSpeedCalculator]:Software Fault

20181029T234851 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20181029T234851 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20181029T234919 [NAL9602]:Failed to initiate SBD session. Error code: 2

20181029T234934 [NAL9602]:Failed to initiate SBD session. Error code: 2

20181029T235011 [CommandLine]:got command ibit

20181029T235012 [IBIT]:Beginning Initiated BIT

20181029T235012 [IBIT]:Beginning control surface checks.

20181029T235012 [CBIT]:Beginning ground fault scan

20181029T235019 [BPC1]:BPC1A: No match for serial number 0226 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20181029T235019 [BPC1]:BPC1B: No match for serial number 0273 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181029T235019 [BPC1]:Failed to parse data from all battery packs.

20181029T235019 [CBIT]:Data Fault in component: BPC1

20181029T235019 [NAL9602]:parseGSV uart error: serial buffer full

20181029T235024 [NAL9602]:parseGSV uart error: serial buffer full

20181029T235029 [NAL9602]:parseGSV uart error: serial buffer full

20181029T235053 [DeadReckonUsingMultipleVelocitySources]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20181029T235053 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20181029T235053 [DeadReckonUsingSpeedCalculator]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20181029T235053 [DeadReckonUsingSpeedCalculator]:Software Fault

20181029T235053 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20181029T235053 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20181029T235058 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 5#Latitude: 36.802895 Longitude: -121.788094

20181029T235059 [IBIT]:Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.

20181029T235059 [IBIT]:bitPressureThreshold: 0.750000 psi

20181029T235059 [IBIT]:Could not read pressure

20181029T235059 [IBIT]:Humidity failed. Onboard reading:67.305580 %

20181029T235233 [CommandLine]:got command ibit

20181029T235235 [IBIT]:Beginning Initiated BIT

20181029T235235 [IBIT]:Beginning control surface checks.

20181029T235235 [CBIT]:Beginning ground fault scan

20181029T235427 [IBIT]:Error acquiring IBIT communications status. Timeout expired.

20181029T235427 [IBIT]:Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.

20181029T235428 [IBIT]:bitPressureThreshold: 0.750000 psi

20181029T235428 [IBIT]:Could not read pressure

20181029T235428 [IBIT]:Humidity failed. Onboard reading:66.621902 %

20181030T000133 [BPC1]:BPC1A: No match for serial number 0226 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20181030T000133 [BPC1]:BPC1B: No match for serial number 0273 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181030T000133 [BPC1]:Failed to parse data from all battery packs.

20181030T000133 [CBIT]:Data Fault in component: BPC1

20181030T001143 [DropWeight]:DROP WEIGHT MISSING.#

20181030T001143 [DropWeight]:Hardware Fault

20181030T001143 [CBIT]:Hardware Fault in component: DropWeight

20181030T001246 [BPC1]:BPC1A: No match for serial number 0226 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20181030T001246 [BPC1]:BPC1B: No match for serial number 0273 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181030T001246 [BPC1]:Failed to parse data from all battery packs.

20181030T001246 [CBIT]:Data Fault in component: BPC1

20181030T005648 [DropWeight]:DROP WEIGHT MISSING.#

20181030T005648 [DropWeight]:Hardware Fault

20181030T005648 [CBIT]:Hardware Fault in component: DropWeight

20181030T013518 [CommandLine]:got command burn on

20181030T013518 [CommandLine]:Activating dropweight wire

20181030T013518 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20181030T013519 [DropWeight]:DROP WEIGHT MISSING.#

20181030T013519 [DropWeight]:Hardware Fault

20181030T013519 [CBIT]:Hardware Fault in component: DropWeight

20181030T014020 [Default:CheckIn:E]:Default mission has been running for 130.300236 min

20181030T014032 [NAL9602]:GPS failed to acquire within timeout.

20181030T014033 [CBIT]:Data Fault in component: NAL9602

20181030T014620 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20181030T034523 [CommandLine]:got command burn on

20181030T034523 [CommandLine]:Activating dropweight wire

20181030T034523 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20181030T035024 [Default:CheckIn:E]:Default mission has been running for 260.376465 min

20181030T035037 [NAL9602]:GPS failed to acquire within timeout.

20181030T035037 [CBIT]:Data Fault in component: NAL9602

20181030T035625 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20181030T041930 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20181030T042103 [BPC1]:BPC1B: No match for serial number 01E9 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181030T042118 [BPC1]:BPC1B: No match for serial number 01E9 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181030T042132 [BPC1]:BPC1B: No match for serial number 01E9 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181030T042330 [BPC1]:BPC1B: No match for serial number 021B in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181030T042345 [BPC1]:BPC1B: No match for serial number 021B in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181030T042359 [BPC1]:BPC1B: No match for serial number 021B in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20181030T042428 [BPC1]:Failed to receive data from all battery packs.

20181030T042428 [BPC1]:Communications Fault

20181030T042428 [CBIT]:Communications Fault in component: BPC1

20181030T044649 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20181030T044654 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20181030T055255 [CBIT]:Beginning ground fault scan

20181030T055527 [CommandLine]:got command burn on

20181030T055527 [CommandLine]:Activating dropweight wire

20181030T055530 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20181030T060032 [Default:CheckIn:E]:Default mission has been running for 390.496940 min

20181030T060044 [NAL9602]:GPS failed to acquire within timeout.

20181030T060044 [CBIT]:Data Fault in component: NAL9602

20181030T060633 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20181030T114128 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20181030T114138 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20181030T114624 [BPC1]:Failed to receive data from all battery packs.

20181030T114624 [BPC1]:Communications Fault

20181030T114624 [CBIT]:Communications Fault in component: BPC1

20181030T155755 [CommandLine]:got command get RDI_Pathfinder.loadAtStartup

20181030T155755 [CommandLine]:RDI_Pathfinder.loadAtStartup 0 bool

20181030T155814 [CommandLine]:got command configSet RDI_Pathfinder.loadAtStartup 1.000000 bool persist

20181030T155814 [CommandLine]:configSet RDI_Pathfinder.loadAtStartup requires a restart to take effect.

20181030T160007 [CommandLine]:got command restart application