2017-05-24T00:39:08.397Z,1495586348.397 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2017-05-24T00:39:08.525Z,1495586348.525 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2017-05-24T00:39:25.781Z,1495586365.781 [CBIT](CRITICAL): Hardware Fault in component: RudderServo
2017-05-24T00:39:51.941Z,1495586391.941 [CBIT](CRITICAL): Data Fault in component: PNI_TCM
2017-05-24T00:39:53.529Z,1495586393.529 [CBIT](CRITICAL): Hardware Fault in component: ElevatorServo
2017-05-24T00:39:01.151Z,1495586341.151 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2017-05-24T00:39:06.635Z,1495586346.635 [SBIT](IMPORTANT): git: 2017-04-19-5-g443ab08
2017-05-24T00:39:06.640Z,1495586346.640 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2017-05-24T00:39:08.506Z,1495586348.506 [CommandLine](FAULT): Scheduling is paused
2017-05-24T00:39:09.011Z,1495586349.011 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2017-05-24T00:39:13.391Z,1495586353.391 [RudderServo](FAULT): Overload Error
2017-05-24T00:39:14.868Z,1495586354.868 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2017-05-24T00:39:17.243Z,1495586357.243 [Aanderaa_O2](FAULT): Timed out starting
2017-05-24T00:39:19.863Z,1495586359.863 [RudderServo](FAULT): Overload Error
2017-05-24T00:39:24.070Z,1495586364.070 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2017-05-24T00:39:25.739Z,1495586365.739 [RudderServo](FAULT): Overload Error
2017-05-24T00:39:29.243Z,1495586369.243 [Aanderaa_O2](FAULT): Timed out starting
2017-05-24T00:39:33.299Z,1495586373.299 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2017-05-24T00:39:39.313Z,1495586379.313 [SBIT](IMPORTANT): Beginning Startup BIT
2017-05-24T00:39:39.318Z,1495586379.318 [CBIT](IMPORTANT): Beginning ground fault scan
2017-05-24T00:39:41.243Z,1495586381.243 [Aanderaa_O2](FAULT): Timed out starting
2017-05-24T00:39:41.343Z,1495586381.343 [ElevatorServo](FAULT): Overload Error
2017-05-24T00:39:41.772Z,1495586381.772 [CBIT](FAULT): Communications Fault in component: Aanderaa_O2
2017-05-24T00:39:42.605Z,1495586382.605 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2017-05-24T00:39:47.483Z,1495586387.483 [ElevatorServo](FAULT): Overload Error
2017-05-24T00:39:49.532Z,1495586389.532 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 4.657929
CHAN A1 (24V): 0.026906
CHAN A2 (12V): 4.697929
CHAN A3 (5V): -0.012213
CHAN B0 (3.3V): 4.766929
CHAN B1 (3.15aV): 0.002115
CHAN B2 (3.15bV): -0.001246
CHAN B3 (GND): -0.000274
OPEN: -0.000691
Full Scale Calc: 4.765 mA, -1.589 mA
2017-05-24T00:39:51.801Z,1495586391.801 [PNI_TCM](FAULT): Failed to set parameters during initialization.
2017-05-24T00:39:53.487Z,1495586393.487 [ElevatorServo](FAULT): Overload Error
2017-05-24T00:40:18.746Z,1495586418.746 [SBIT](FAULT): Control surface position failure.
2017-05-24T00:40:28.733Z,1495586428.733 [CommandLine](IMPORTANT): got command quit