2020-07-09T20:29:21.414Z,1594326561.414 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2020-07-09T20:29:26.819Z,1594326566.819 [SBIT](IMPORTANT): git: 2020-07-06
2020-07-09T20:29:26.819Z,1594326566.819 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2020-07-09T20:29:27.398Z,1594326567.398 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-09T20:30:11.269Z,1594326611.269 [SBIT](IMPORTANT): Beginning Startup BIT
2020-07-09T20:30:11.273Z,1594326611.273 [CBIT](IMPORTANT): Beginning ground fault scan
2020-07-09T20:30:22.172Z,1594326622.172 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.016493
CHAN A1 (24V): 0.000324
CHAN A2 (12V): -0.002207
CHAN A3 (5V): -0.001224
CHAN B0 (3.3V): -0.000361
CHAN B1 (3.15aV): -0.000140
CHAN B2 (3.15bV): 0.000045
CHAN B3 (GND): 0.000212
OPEN: -0.000324
Full Scale Calc: 4.765 mA, -1.589 mA
2020-07-09T20:30:27.388Z,1594326627.388 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-09T20:30:28.207Z,1594326628.207 [DAT](FAULT): LCB fault:  Hardware Overcurrent Shutdown. Current Limiter Activated.
2020-07-09T20:30:28.303Z,1594326628.303 [CommandLine](IMPORTANT): got command failComponent
2020-07-09T20:30:28.304Z,1594326628.304 [CommandLine](IMPORTANT): Failed components:
2020-07-09T20:30:28.304Z,1594326628.304 [CommandLine](IMPORTANT): DAT: Hardware Fault
2020-07-09T20:30:31.112Z,1594326631.112 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-09T20:31:05.418Z,1594326665.418 [SBIT](IMPORTANT): SBIT PASSED
2020-07-09T20:31:05.418Z,1594326665.418 [SBIT](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2020-07-09T20:31:05.419Z,1594326665.419 [SBIT](IMPORTANT): CBIT.gf24Offset=154 microampere;

2020-07-09T20:31:05.419Z,1594326665.419 [SBIT](IMPORTANT): Express linearApproximation acoustic_contact_range 10.000000 meter;

2020-07-09T20:31:05.420Z,1594326665.420 [SBIT](IMPORTANT): Express linearApproximation platform_average_power 1.000000 watt;

2020-07-09T20:31:05.420Z,1594326665.420 [SBIT](IMPORTANT): VerticalControl.buoyancyNeutral=97.075473 cubic_centimeter;

2020-07-09T20:31:05.420Z,1594326665.420 [SBIT](IMPORTANT): VerticalControl.massDefault=-6.016589 millimeter;

2020-07-09T20:31:05.811Z,1594326665.811 [MissionManager](IMPORTANT): Started mission Startup
2020-07-09T20:31:31.251Z,1594326691.251 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-09T20:31:32.057Z,1594326692.057 [DAT](FAULT): LCB fault:  Hardware Overcurrent Shutdown. Current Limiter Activated.
2020-07-09T20:31:34.959Z,1594326694.959 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-09T20:32:35.083Z,1594326755.083 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-09T20:32:35.877Z,1594326755.877 [DAT](FAULT): LCB fault:  Hardware Overcurrent Shutdown. Current Limiter Activated.
2020-07-09T20:32:38.771Z,1594326758.771 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-09T20:33:05.804Z,1594326785.804 [MissionManager](IMPORTANT): Started mission Default
2020-07-09T20:33:38.900Z,1594326818.900 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-09T20:33:39.705Z,1594326819.705 [DAT](FAULT): LCB fault:  Hardware Overcurrent Shutdown. Current Limiter Activated.
2020-07-09T20:33:42.607Z,1594326822.607 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-09T20:34:42.732Z,1594326882.732 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-09T20:34:43.541Z,1594326883.541 [DAT](FAULT): LCB fault:  Hardware Overcurrent Shutdown. Current Limiter Activated.
2020-07-09T20:34:46.459Z,1594326886.459 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-09T20:35:07.784Z,1594326907.784 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2020-07-09T20:35:46.579Z,1594326946.579 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-09T20:35:47.377Z,1594326947.377 [DAT](FAULT): LCB fault:  Hardware Overcurrent Shutdown. Current Limiter Activated.
2020-07-09T20:35:50.307Z,1594326950.307 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-09T20:36:50.419Z,1594327010.419 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-09T20:36:51.219Z,1594327011.219 [DAT](FAULT): LCB fault:  Hardware Overcurrent Shutdown. Current Limiter Activated.
2020-07-09T20:36:54.139Z,1594327014.139 [CommandLine](IMPORTANT): got command ! echo 1 > /dev/loadB2
2020-07-09T20:37:54.247Z,1594327074.247 [DAT](FAULT): failed to initialize, no bytes available on serial interface
2020-07-09T20:37:54.263Z,1594327074.263 [CBIT](FAULT): Communications Fault in component: DAT
2020-07-09T20:37:55.041Z,1594327075.041 [DAT](FAULT): LCB fault:  Hardware Overcurrent Shutdown. Current Limiter Activated.