2018-08-20T23:48:25.489Z,1534808905.489 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg 2018-08-20T23:48:30.525Z,1534808910.525 [SBIT](IMPORTANT): git: 2018-08-20 2018-08-20T23:48:30.526Z,1534808910.526 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2018-08-20T23:48:32.894Z,1534808912.894 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-08-20T23:48:36.474Z,1534808916.474 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2018-08-20T23:48:54.049Z,1534808934.049 [SBIT](IMPORTANT): Beginning Startup BIT 2018-08-20T23:48:54.055Z,1534808934.055 [CBIT](IMPORTANT): Beginning ground fault scan 2018-08-20T23:49:05.052Z,1534808945.052 [CBIT](IMPORTANT): No ground fault detected mA: CHAN A0 (Batt): -0.006564 CHAN A1 (24V): -0.010062 CHAN A2 (12V): -0.002021 CHAN A3 (5V): -0.001483 CHAN B0 (3.3V): 0.000164 CHAN B1 (3.15aV): 0.000014 CHAN B2 (3.15bV): -0.000499 CHAN B3 (GND): 0.000096 OPEN: -0.000430 Full Scale Calc: 4.765 mA, -1.589 mA 2018-08-20T23:49:47.823Z,1534808987.823 [SBIT](IMPORTANT): SBIT PASSED 2018-08-20T23:49:47.893Z,1534808987.893 [CommandLine](IMPORTANT): got command configSet list 2018-08-20T23:49:47.893Z,1534808987.893 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg 2018-08-20T23:49:47.895Z,1534808987.895 [CommandLine](IMPORTANT): CBIT.stopDepth=215 meter; 2018-08-20T23:49:47.895Z,1534808987.895 [CommandLine](IMPORTANT): Rowe_600LCM.loadAtStartup=1 bool; 2018-08-20T23:49:48.237Z,1534808988.237 [MissionManager](IMPORTANT): Started mission Startup 2018-08-20T23:50:31.806Z,1534809031.806 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-20T23:51:49.223Z,1534809109.223 [MissionManager](IMPORTANT): Started mission Default 2018-08-20T23:52:34.642Z,1534809154.642 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-20T23:52:36.047Z,1534809156.047 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-20T23:54:37.606Z,1534809277.606 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-20T23:56:40.426Z,1534809400.426 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-20T23:57:43.839Z,1534809463.839 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 5.903541 min 2018-08-20T23:58:42.898Z,1534809522.898 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-20T23:58:43.017Z,1534809523.017 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-20T23:58:48.864Z,1534809528.864 [DataOverHttps](IMPORTANT): SBD MTMSN=20180820T235846 2018-08-20T23:58:53.292Z,1534809533.292 [CommandLine](IMPORTANT): got command load ./Missions/Science/sci2.xml 2018-08-20T23:58:55.157Z,1534809535.157 [CommandLine](IMPORTANT): Loaded ./Missions/Science/sci2.xml 2018-08-20T23:58:57.103Z,1534809537.103 [CommandLine](IMPORTANT): got command set sci2.Lat1 36.750000 degree 2018-08-20T23:58:57.104Z,1534809537.104 [CommandLine](IMPORTANT): got command set sci2.Lon1 -122.022003 degree 2018-08-20T23:58:57.105Z,1534809537.105 [CommandLine](IMPORTANT): got command run 2018-08-20T23:58:57.108Z,1534809537.108 [CommandLine](IMPORTANT): Running 2018-08-20T23:58:57.193Z,1534809537.193 [MissionManager](IMPORTANT): Started mission sci2 2018-08-20T23:58:58.222Z,1534809538.222 [ThrusterServo](FAULT): getVelocity uart error serial timeout 2018-08-20T23:58:58.222Z,1534809538.222 [ThrusterServo](FAULT): Thruster uart error: serial timeout 2018-08-21T00:10:44.106Z,1534810244.106 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:10:45.726Z,1534810245.726 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T00:12:47.302Z,1534810367.302 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:14:50.118Z,1534810490.118 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:16:53.314Z,1534810613.314 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:16:55.135Z,1534810615.135 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T00:18:56.504Z,1534810736.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:18:56.797Z,1534810736.797 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-21T00:30:57.302Z,1534811457.302 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:33:00.111Z,1534811580.111 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:33:01.799Z,1534811581.799 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T00:35:03.306Z,1534811703.306 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:35:04.958Z,1534811704.958 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T00:37:06.287Z,1534811826.287 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:39:09.098Z,1534811949.098 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:39:09.289Z,1534811949.289 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-21T00:51:09.525Z,1534812669.525 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:53:12.342Z,1534812792.342 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:55:15.438Z,1534812915.438 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:57:18.067Z,1534813038.067 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:57:19.713Z,1534813039.713 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T00:58:19.480Z,1534813099.480 [ThrusterServo](FAULT): getVelocity uart error serial timeout 2018-08-21T00:58:19.481Z,1534813099.481 [ThrusterServo](FAULT): Thruster uart error: serial timeout 2018-08-21T00:59:20.524Z,1534813160.524 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T00:59:20.725Z,1534813160.725 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-21T01:11:21.082Z,1534813881.082 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:13:24.291Z,1534814004.291 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:13:25.947Z,1534814005.947 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T01:15:27.488Z,1534814127.488 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:15:29.151Z,1534814129.151 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T01:17:30.274Z,1534814250.274 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:17:31.923Z,1534814251.923 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T01:19:33.258Z,1534814373.258 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:19:33.615Z,1534814373.615 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-21T01:22:24.288Z,1534814544.288 [sci2:NeedComms:C:A_Timeout:A](IMPORTANT): first GPS update timeout 2018-08-21T01:31:34.042Z,1534815094.042 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:33:37.042Z,1534815217.042 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:35:40.090Z,1534815340.090 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:35:41.739Z,1534815341.739 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T01:37:43.078Z,1534815463.078 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:39:44.537Z,1534815584.537 [ThrusterServo](FAULT): Invalid EZ Servo response:"\377\377\325242" 2018-08-21T01:39:45.222Z,1534815585.222 [ThrusterServo](FAULT): LCB fault: Hardware Overcurrent Shutdown. Software Overcurrent. Current Limiter Activated. 2018-08-21T01:39:46.078Z,1534815586.078 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:39:46.797Z,1534815586.797 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-21T01:51:47.043Z,1534816307.043 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:51:48.679Z,1534816308.679 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T01:53:50.042Z,1534816430.042 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:55:53.243Z,1534816553.243 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:57:56.230Z,1534816676.230 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:58:57.997Z,1534816737.997 [MissionManager](IMPORTANT): Started mission Default 2018-08-21T01:59:59.367Z,1534816799.367 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T01:59:59.487Z,1534816799.487 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-21T02:12:00.142Z,1534817520.142 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T02:14:02.658Z,1534817642.658 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T02:15:47.481Z,1534817747.481 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=8103, MT Status=1, MTMSN=1481 2018-08-21T02:15:48.043Z,1534817748.043 [CommandLine](IMPORTANT): got command stop 2018-08-21T02:15:48.043Z,1534817748.043 [CommandLine](IMPORTANT): Scheduling is paused 2018-08-21T02:16:05.067Z,1534817765.067 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T02:16:06.526Z,1534817766.526 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T02:18:07.930Z,1534817887.930 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T02:20:10.627Z,1534818010.627 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2018-08-21T02:20:10.676Z,1534818010.676 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2018-08-21T02:20:12.031Z,1534818012.031 [Rowe_600LCM](FAULT): LCB fault: Software Overcurrent. 2018-08-21T02:24:11.177Z,1534818251.177 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 25.213064 min 2018-08-21T02:26:20.418Z,1534818380.418 [DataOverHttps](IMPORTANT): SBD MTMSN=20180821T022617 2018-08-21T02:26:26.317Z,1534818386.317 [CommandLine](IMPORTANT): got command schedule asap "load Science/sci2.xml;set sci2.MissionTimeout 14 hour;set sci2.NeedCommsTime 120 minute;set sci2.Lat1 36.750 degree;set sci2.Lon1 -122.022 degree;set sci2.Lat2 36.691 degree;set sci2.Lon2 -122.376 degree;set sci2.Lat3 36.750 degree" 3apfk 1 2.000000 2018-08-21T02:26:26.318Z,1534818386.318 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=3apfk 2018-08-21T02:26:26.319Z,1534818386.319 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='3apfk'): "load Science/sci2.xml;set sci2.MissionTimeout 14 hour;set sci2.NeedCommsTime 120 minute;set sci2.Lat1 36.750 degree;set sci2.Lon1 -122.022 degree;set sci2.Lat2 36.691 degree;set sci2.Lon2 -122.376 degree;set sci2.Lat3 36.750 degree" ASAP 2018-08-21T02:26:28.304Z,1534818388.304 [DataOverHttps](IMPORTANT): SBD MTMSN=20180821T022625 2018-08-21T02:26:35.731Z,1534818395.731 [CommandLine](IMPORTANT): got command schedule asap "set sci2.Lon3 -122.022 degree;run " 3apfk 2 2.000000 2018-08-21T02:26:35.732Z,1534818395.732 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=3apfk 2018-08-21T02:26:35.733Z,1534818395.733 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='3apfk'): "set sci2.Lon3 -122.022 degree;run " ASAP 2018-08-21T02:26:35.822Z,1534818395.822 [CommandLine](IMPORTANT): got command load ./Missions/Science/sci2.xml 2018-08-21T02:26:37.509Z,1534818397.509 [CommandLine](IMPORTANT): Loaded ./Missions/Science/sci2.xml 2018-08-21T02:26:47.909Z,1534818407.909 [CommandLine](IMPORTANT): got command set sci2.MissionTimeout 14.000000 hour 2018-08-21T02:26:47.923Z,1534818407.923 [CommandLine](IMPORTANT): got command set sci2.NeedCommsTime 120.000000 minute 2018-08-21T02:26:47.924Z,1534818407.924 [CommandLine](IMPORTANT): got command set sci2.Lat1 36.750000 degree 2018-08-21T02:26:47.925Z,1534818407.925 [CommandLine](IMPORTANT): got command set sci2.Lon1 -122.022003 degree 2018-08-21T02:26:47.925Z,1534818407.925 [CommandLine](IMPORTANT): got command set sci2.Lat2 36.691002 degree 2018-08-21T02:26:47.926Z,1534818407.926 [CommandLine](IMPORTANT): got command set sci2.Lon2 -122.375999 degree 2018-08-21T02:26:47.927Z,1534818407.927 [CommandLine](IMPORTANT): got command set sci2.Lat3 36.750000 degree 2018-08-21T02:26:49.368Z,1534818409.368 [CommandLine](IMPORTANT): got command set sci2.Lon3 -122.022003 degree 2018-08-21T02:26:49.369Z,1534818409.369 [CommandLine](IMPORTANT): got command run 2018-08-21T02:26:49.375Z,1534818409.375 [CommandLine](IMPORTANT): Running 2018-08-21T02:26:51.088Z,1534818411.088 [MissionManager](IMPORTANT): Started mission sci2