2018-08-01T17:07:59.592Z,1533143279.592 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-08-01T17:08:04.560Z,1533143284.560 [SBIT](IMPORTANT): git: 2018-06-03
2018-08-01T17:08:04.560Z,1533143284.560 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-08-01T17:08:28.088Z,1533143308.088 [SBIT](IMPORTANT): Beginning Startup BIT
2018-08-01T17:08:28.094Z,1533143308.094 [CBIT](IMPORTANT): Beginning ground fault scan
2018-08-01T17:08:39.059Z,1533143319.059 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.014632
CHAN A1 (24V): -0.018213
CHAN A2 (12V): -0.002366
CHAN A3 (5V): -0.001150
CHAN B0 (3.3V): -0.000302
CHAN B1 (3.15aV): -0.000249
CHAN B2 (3.15bV): 0.000046
CHAN B3 (GND): -0.000166
OPEN: -0.000474
Full Scale Calc: 4.765 mA, -1.589 mA
2018-08-01T17:09:22.252Z,1533143362.252 [SBIT](IMPORTANT): SBIT PASSED
2018-08-01T17:09:22.349Z,1533143362.349 [CommandLine](IMPORTANT): got command configSet list
2018-08-01T17:09:22.350Z,1533143362.350 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-08-01T17:09:22.351Z,1533143362.351 [CommandLine](IMPORTANT): Express linearApproximation height_above_sea_floor 5.000000 meter;

2018-08-01T17:09:22.662Z,1533143362.662 [MissionManager](IMPORTANT): Started mission Startup
2018-08-01T17:10:04.841Z,1533143404.841 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:10:44.271Z,1533143444.271 [MissionManager](IMPORTANT): Started mission Default
2018-08-01T17:12:07.773Z,1533143527.773 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:12:09.169Z,1533143529.169 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T17:12:10.757Z,1533143530.757 [DataOverHttps](IMPORTANT): SBD MTMSN=20180801T171152
2018-08-01T17:12:15.343Z,1533143535.343 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 2 hour;set profile_station.NeedCommsTime 20 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" 2asua 1 2.000000
2018-08-01T17:12:15.344Z,1533143535.344 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=2asua
2018-08-01T17:12:15.345Z,1533143535.345 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='2asua'): "load Science/profile_station.xml;set profile_station.MissionTimeout 2 hour;set profile_station.NeedCommsTime 20 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" ASAP
2018-08-01T17:12:16.063Z,1533143536.063 [DataOverHttps](IMPORTANT): SBD MTMSN=20180801T171157
2018-08-01T17:12:20.746Z,1533143540.746 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMaxDepth 20 meter;set profile_station.MaxDepth 40 meter;run " 2asua 2 2.000000
2018-08-01T17:12:20.746Z,1533143540.746 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=2asua
2018-08-01T17:12:20.748Z,1533143540.748 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='2asua'): "set profile_station.YoYoMaxDepth 20 meter;set profile_station.MaxDepth 40 meter;run " ASAP
2018-08-01T17:12:20.896Z,1533143540.896 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml
2018-08-01T17:12:22.624Z,1533143542.624 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml
2018-08-01T17:12:35.589Z,1533143555.589 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 2.000000 hour
2018-08-01T17:12:35.590Z,1533143555.590 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 20.000000 minute
2018-08-01T17:12:35.591Z,1533143555.591 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.797001 degree
2018-08-01T17:12:35.592Z,1533143555.592 [CommandLine](IMPORTANT): got command set profile_station.Lon -121.847000 degree
2018-08-01T17:12:41.980Z,1533143561.980 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 20.000000 meter
2018-08-01T17:12:41.988Z,1533143561.988 [CommandLine](IMPORTANT): got command set profile_station.MaxDepth 40.000000 meter
2018-08-01T17:12:41.988Z,1533143561.988 [CommandLine](IMPORTANT): got command run 
2018-08-01T17:12:41.991Z,1533143561.991 [CommandLine](IMPORTANT): Running 
2018-08-01T17:12:42.307Z,1533143562.307 [MissionManager](IMPORTANT): Started mission profile_station
2018-08-01T17:12:43.500Z,1533143563.500 [ThrusterServo](FAULT): getVelocity uart error serial timeout
2018-08-01T17:12:43.500Z,1533143563.500 [ThrusterServo](FAULT): Thruster uart error: serial timeout
2018-08-01T17:14:10.433Z,1533143650.433 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:16:13.421Z,1533143773.421 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:18:17.197Z,1533143897.197 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:18:17.273Z,1533143897.273 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T17:19:51.017Z,1533143991.017 [ThrusterServo](FAULT): getVelocity uart error serial timeout
2018-08-01T17:19:51.018Z,1533143991.018 [ThrusterServo](FAULT): Thruster uart error: serial timeout
2018-08-01T17:29:05.809Z,1533144545.809 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 23 sticks.
2018-08-01T17:30:18.440Z,1533144618.440 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:32:21.404Z,1533144741.404 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:32:23.017Z,1533144743.017 [Rowe_600LCM](FAULT): LCB fault: LCB Watchdog Reset. Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.
2018-08-01T17:33:19.893Z,1533144799.893 [ThrusterServo](FAULT): Overload Error
2018-08-01T17:33:20.648Z,1533144800.648 [ThrusterServo](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T17:34:24.189Z,1533144864.189 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:36:27.404Z,1533144987.404 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:36:29.057Z,1533144989.057 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T17:38:30.201Z,1533145110.201 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:38:30.255Z,1533145110.255 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T17:50:07.972Z,1533145807.972 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 23 sticks.
2018-08-01T17:50:31.181Z,1533145831.181 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:52:34.177Z,1533145954.177 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:52:35.881Z,1533145955.881 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T17:54:37.385Z,1533146077.385 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:56:40.374Z,1533146200.374 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:58:43.578Z,1533146323.578 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T17:58:43.864Z,1533146323.864 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T18:08:28.523Z,1533146908.523 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=7984, MT Status=1, MTMSN=1474
2018-08-01T18:08:29.082Z,1533146909.082 [CommandLine](IMPORTANT): got command stop
2018-08-01T18:08:29.083Z,1533146909.083 [CommandLine](IMPORTANT): Scheduling is paused
2018-08-01T18:08:29.416Z,1533146909.416 [MissionManager](IMPORTANT): Started mission Default
2018-08-01T18:10:44.352Z,1533147044.352 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:11:09.921Z,1533147069.921 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 23 sticks.
2018-08-01T18:12:47.345Z,1533147167.345 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:14:50.113Z,1533147290.113 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:16:31.025Z,1533147391.025 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 8.020163 min 
2018-08-01T18:16:52.952Z,1533147412.952 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:16:54.417Z,1533147414.417 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T18:18:55.857Z,1533147535.857 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:18:55.987Z,1533147535.987 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T18:23:20.648Z,1533147800.648 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 14.801995 min 
2018-08-01T18:29:34.512Z,1533148174.512 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.026742 min 
2018-08-01T18:30:57.217Z,1533148257.217 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:32:13.737Z,1533148333.737 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 23 sticks.
2018-08-01T18:33:00.065Z,1533148380.065 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:35:02.809Z,1533148502.809 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:35:43.828Z,1533148543.828 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 27.233864 min 
2018-08-01T18:35:49.381Z,1533148549.381 [DataOverHttps](IMPORTANT): SBD MTMSN=20180801T183531
2018-08-01T18:35:54.267Z,1533148554.267 [CommandLine](IMPORTANT): got command schedule asap "load Science/profile_station.xml;set profile_station.MissionTimeout 2 hour;set profile_station.NeedCommsTime 20 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" 2awyy 1 2.000000
2018-08-01T18:35:54.267Z,1533148554.267 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=2awyy
2018-08-01T18:35:54.281Z,1533148554.281 [CommandLine](IMPORTANT): Scheduled #3 (#1 of 2 with id='2awyy'): "load Science/profile_station.xml;set profile_station.MissionTimeout 2 hour;set profile_station.NeedCommsTime 20 minute;set profile_station.Lat 36.797 degree;set profile_station.Lon -121.847 degree" ASAP
2018-08-01T18:35:55.454Z,1533148555.454 [DataOverHttps](IMPORTANT): SBD MTMSN=20180801T183537
2018-08-01T18:35:59.983Z,1533148559.983 [CommandLine](IMPORTANT): got command schedule asap "set profile_station.YoYoMaxDepth 20 meter;set profile_station.MaxDepth 40 meter;run " 2awyy 2 2.000000
2018-08-01T18:35:59.983Z,1533148559.983 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=2awyy
2018-08-01T18:35:59.985Z,1533148559.985 [CommandLine](IMPORTANT): Scheduled #4 (#2 of 2 with id='2awyy'): "set profile_station.YoYoMaxDepth 20 meter;set profile_station.MaxDepth 40 meter;run " ASAP
2018-08-01T18:36:00.143Z,1533148560.143 [CommandLine](IMPORTANT): got command load ./Missions/Science/profile_station.xml
2018-08-01T18:36:01.885Z,1533148561.885 [CommandLine](IMPORTANT): Loaded ./Missions/Science/profile_station.xml
2018-08-01T18:36:14.183Z,1533148574.183 [CommandLine](IMPORTANT): got command set profile_station.MissionTimeout 2.000000 hour
2018-08-01T18:36:14.184Z,1533148574.184 [CommandLine](IMPORTANT): got command set profile_station.NeedCommsTime 20.000000 minute
2018-08-01T18:36:14.186Z,1533148574.186 [CommandLine](IMPORTANT): got command set profile_station.Lat 36.797001 degree
2018-08-01T18:36:14.187Z,1533148574.187 [CommandLine](IMPORTANT): got command set profile_station.Lon -121.847000 degree
2018-08-01T18:36:20.675Z,1533148580.675 [CommandLine](IMPORTANT): got command set profile_station.YoYoMaxDepth 20.000000 meter
2018-08-01T18:36:20.676Z,1533148580.676 [CommandLine](IMPORTANT): got command set profile_station.MaxDepth 40.000000 meter
2018-08-01T18:36:20.676Z,1533148580.676 [CommandLine](IMPORTANT): got command run 
2018-08-01T18:36:20.678Z,1533148580.678 [CommandLine](IMPORTANT): Running 
2018-08-01T18:36:20.842Z,1533148580.842 [MissionManager](IMPORTANT): Started mission profile_station
2018-08-01T18:37:05.373Z,1533148625.373 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:39:08.157Z,1533148748.157 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:39:08.226Z,1533148748.226 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T18:51:09.337Z,1533149469.337 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:53:12.144Z,1533149592.144 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:53:13.729Z,1533149593.729 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T18:53:15.610Z,1533149595.610 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 23 sticks.
2018-08-01T18:55:15.137Z,1533149715.137 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:55:16.782Z,1533149716.782 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T18:57:17.707Z,1533149837.707 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:57:19.450Z,1533149839.450 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T18:59:21.129Z,1533149961.129 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T18:59:21.642Z,1533149961.642 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T19:11:21.370Z,1533150681.370 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:13:24.153Z,1533150804.153 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:14:17.534Z,1533150857.534 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 23 sticks.
2018-08-01T19:15:27.125Z,1533150927.125 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:17:30.121Z,1533151050.121 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:19:33.327Z,1533151173.327 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:19:33.583Z,1533151173.583 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T19:31:34.305Z,1533151894.305 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:31:35.945Z,1533151895.945 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T19:33:01.777Z,1533151981.777 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=8003, MT Status=1, MTMSN=1475
2018-08-01T19:33:02.470Z,1533151982.470 [CommandLine](IMPORTANT): got command load ./Missions/Transport/keepstation_3km.xml
2018-08-01T19:33:03.696Z,1533151983.696 [CommandLine](IMPORTANT): Loaded ./Missions/Transport/keepstation_3km.xml
2018-08-01T19:33:11.662Z,1533151991.662 [CommandLine](IMPORTANT): got command set keepstation_3km:keepstation.MissionTimeout 2.000000 hour
2018-08-01T19:33:11.663Z,1533151991.663 [CommandLine](IMPORTANT): got command set keepstation_3km:keepstation.NeedCommsTime 20.000000 minute
2018-08-01T19:33:11.664Z,1533151991.664 [CommandLine](IMPORTANT): got command run 
2018-08-01T19:33:11.667Z,1533151991.667 [CommandLine](IMPORTANT): Running 
2018-08-01T19:33:11.760Z,1533151991.760 [MissionManager](IMPORTANT): Started mission keepstation_3km
2018-08-01T19:33:36.809Z,1533152016.809 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:33:38.281Z,1533152018.281 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T19:35:19.582Z,1533152119.582 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 18 sticks.
2018-08-01T19:35:39.853Z,1533152139.853 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:37:42.853Z,1533152262.853 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:39:46.052Z,1533152386.052 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:39:46.222Z,1533152386.222 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T19:39:47.561Z,1533152387.561 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T19:51:47.253Z,1533153107.253 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:53:49.648Z,1533153229.648 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:53:51.317Z,1533153231.317 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T19:55:41.974Z,1533153341.974 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=8005, MT Status=1, MTMSN=1476
2018-08-01T19:55:42.782Z,1533153342.782 [CommandLine](IMPORTANT): got command schedule asap "load Transport/keepstation_3km.xml;set keepstation_3km:keepstation.MissionTimeout 2 hour;set keepstation_3km:keepstation.NeedCommsTime 20 minute;set keepstation_3km:keepstation.Latitude 36.8069 degree" 2b0bu 1 2.000000
2018-08-01T19:55:42.783Z,1533153342.783 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=2b0bu
2018-08-01T19:55:42.784Z,1533153342.784 [CommandLine](IMPORTANT): Scheduled #5 (#1 of 2 with id='2b0bu'): "load Transport/keepstation_3km.xml;set keepstation_3km:keepstation.MissionTimeout 2 hour;set keepstation_3km:keepstation.NeedCommsTime 20 minute;set keepstation_3km:keepstation.Latitude 36.8069 degree" ASAP
2018-08-01T19:55:52.753Z,1533153352.753 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:56:27.441Z,1533153387.441 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 18 sticks.
2018-08-01T19:57:55.633Z,1533153475.633 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T19:57:57.173Z,1533153477.173 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T19:58:34.441Z,1533153514.441 [NAL9602](IMPORTANT): SBD MO Status=1, MOMSN=8006, MT Status=1, MTMSN=1477
2018-08-01T19:58:35.206Z,1533153515.206 [CommandLine](IMPORTANT): got command schedule asap "set keepstation_3km:keepstation.Longitude -121.824326 degree;set keepstation_3km:keepstation.Depth 15 meter;set keepstation_3km:keepstation.Speed 1 meter_per_second;run " 2b0bu 2 2.000000
2018-08-01T19:58:35.207Z,1533153515.207 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=2b0bu
2018-08-01T19:58:35.208Z,1533153515.208 [CommandLine](IMPORTANT): Scheduled #6 (#2 of 2 with id='2b0bu'): "set keepstation_3km:keepstation.Longitude -121.824326 degree;set keepstation_3km:keepstation.Depth 15 meter;set keepstation_3km:keepstation.Speed 1 meter_per_second;run " ASAP
2018-08-01T19:58:35.243Z,1533153515.243 [CommandLine](IMPORTANT): got command load ./Missions/Transport/keepstation_3km.xml
2018-08-01T19:58:36.231Z,1533153516.231 [CommandLine](IMPORTANT): Loaded ./Missions/Transport/keepstation_3km.xml
2018-08-01T19:58:36.606Z,1533153516.606 [MissionManager](IMPORTANT): Started mission Default
2018-08-01T19:58:51.557Z,1533153531.557 [CommandLine](IMPORTANT): got command set keepstation_3km:keepstation.MissionTimeout 2.000000 hour
2018-08-01T19:58:51.558Z,1533153531.558 [CommandLine](IMPORTANT): got command set keepstation_3km:keepstation.NeedCommsTime 20.000000 minute
2018-08-01T19:58:51.559Z,1533153531.559 [CommandLine](IMPORTANT): got command set keepstation_3km:keepstation.Latitude 36.806900 degree
2018-08-01T19:59:04.934Z,1533153544.934 [CommandLine](IMPORTANT): got command set keepstation_3km:keepstation.Longitude -121.824326 degree
2018-08-01T19:59:04.962Z,1533153544.962 [CommandLine](IMPORTANT): got command set keepstation_3km:keepstation.Depth 15.000000 meter
2018-08-01T19:59:04.963Z,1533153544.963 [CommandLine](IMPORTANT): got command set keepstation_3km:keepstation.Speed 1.000000 meter_per_second
2018-08-01T19:59:04.964Z,1533153544.964 [CommandLine](IMPORTANT): got command run 
2018-08-01T19:59:04.970Z,1533153544.970 [CommandLine](IMPORTANT): Running 
2018-08-01T19:59:05.014Z,1533153545.014 [MissionManager](IMPORTANT): Started mission keepstation_3km
2018-08-01T20:00:00.465Z,1533153600.465 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:00:00.604Z,1533153600.604 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T20:12:01.289Z,1533154321.289 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:14:04.089Z,1533154444.089 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:16:06.484Z,1533154566.484 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:16:07.965Z,1533154567.965 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T20:17:29.737Z,1533154649.737 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 17 sticks.
2018-08-01T20:18:09.289Z,1533154689.289 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:20:12.140Z,1533154812.140 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:20:12.283Z,1533154812.283 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T20:30:18.496Z,1533155418.496 [NAL9602](IMPORTANT): SBD MO Status=0, MOMSN=8013, MT Status=1, MTMSN=1478
2018-08-01T20:30:19.042Z,1533155419.042 [CommandLine](IMPORTANT): got command stop
2018-08-01T20:30:19.318Z,1533155419.318 [MissionManager](IMPORTANT): Started mission Default
2018-08-01T20:32:12.444Z,1533155532.444 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:32:13.878Z,1533155533.878 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T20:34:16.864Z,1533155656.864 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:36:19.029Z,1533155779.029 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:38:21.273Z,1533155901.273 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:38:30.097Z,1533155910.097 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 8.173091 min 
2018-08-01T20:38:34.812Z,1533155914.812 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 15 sticks.
2018-08-01T20:38:34.840Z,1533155914.840 [CBIT](CRITICAL): Data Fault in component: BPC1
2018-08-01T20:38:34.996Z,1533155914.996 [CommandLine](FAULT): Scheduling is paused
2018-08-01T20:40:24.276Z,1533156024.276 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:40:24.406Z,1533156024.406 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T20:48:56.025Z,1533156536.025 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 18.604482 min 
2018-08-01T20:49:08.411Z,1533156548.411 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-08-01T20:52:25.285Z,1533156745.285 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:54:28.104Z,1533156868.104 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:56:30.269Z,1533156990.269 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:56:31.714Z,1533156991.714 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T20:58:32.660Z,1533157112.660 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T20:58:34.061Z,1533157114.061 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T20:59:28.680Z,1533157168.680 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 29.149312 min 
2018-08-01T20:59:57.835Z,1533157197.835 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-08-01T21:00:35.813Z,1533157235.813 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-08-01T21:00:36.035Z,1533157236.035 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-08-01T21:00:37.162Z,1533157237.162 [Rowe_600LCM](FAULT): LCB fault:  Software Overcurrent.
2018-08-01T21:01:39.589Z,1533157299.589 [DataOverHttps](IMPORTANT): SBD MOMSN=8392181, MTMSN=20180801T210120