daphne Path

trajectory

20250609T184255 [CommandExec]:got command restart logs

20250609T184301 [BPC1]:BPC1B got IPBS message with 4 sticks (min is 7).

20250609T184402 [CommandExec]:got command run ./Missions/Maintenance/ballast_and_trim.tl

20250609T184417 [CommandExec]:Running ./Missions/Maintenance/ballast_and_trim.tl

20250609T184417 [MissionManager]:Started mission ballast_and_trim

20250609T184422 [CTD_Seabird]:Failed to parse device response: #

20250609T184735 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20250609T190140 [CommandExec]:got command gfscan

20250609T190141 [GFScanner]:Beginning ground fault scan

20250609T191141 completed. Estimation time: 10.01 minutes.

20250609T191141 persisted config values to: 249.798756 cc buoyancy neutral and 12.729612 mm mass default

20250609T191500 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250609T191609 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250609T191747 [MissionManager]:Started mission Default

20250609T192131 [CommandExec]:got command run ./Missions/Maintenance/calibrate_sparton_compass.tl

20250609T192143 [CommandExec]:Running ./Missions/Maintenance/calibrate_sparton_compass.tl

20250609T192143 [MissionManager]:Started mission calibrate_sparton_compass

20250609T192144 [calibrate_sparton_compass:N.AltitudeEnvelope]:Altitude Measurement is not Active.

20250609T192148 [CTD_Seabird]:Failed to parse device response: #

20250609T192212 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250609T192328 [CTD_Seabird]:Failed to parse device response: 5,4.06196,4112.05#

20250609T195235 [BPC1]:BPC1B got IPBS message with 4 sticks (min is 7).

20250609T195248 [BPC1]:BPC1B got IPBS message with 4 sticks (min is 7).

20250609T200831 [CTD_Seabird]:Failed to parse device response: .56#

20250609T201836 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20250609T202143 [AHRS_M2]:Acquired 10 calibration points.

20250609T202143 [MissionManager]:Started mission Default

20250609T202144 [AHRS_M2]:Magnetic calibration quality (0[best] to 10000) is 0.000457.

20250609T203040 [Default:CheckIn:E]:Default mission has been running for 8.928549 min

20250609T203532 [CommandExec]:got command run ./Missions/Science/mbts_sci2.tl

20250609T203545 [CommandExec]:Running ./Missions/Science/mbts_sci2.tl

20250609T203546 [MissionManager]:Started mission mbts_sci2

20250609T203547 [mbts_sci2:U.AltitudeEnvelope]:Altitude Measurement is not Active.

20250609T203547 [mbts_sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20250609T203550 [CTD_Seabird]:Failed to parse device response: #

20250609T203623 [mbts_sci2:Lap:A]:Starting Lap

20250609T203626 [mbts_sci2:Lap:Wpt1:A]:Setting YoYoMaxDepth = 40.000000 m

20250609T204030 [RudderServo]:Invalid EZ Servo response:"#\r"

20250609T204030 [RudderServo]:Communications Fault

20250609T204030 [RudderServo]:Rudder reporting null position

20250609T204030 [CBIT]:Communications Fault in component: RudderServo

20250609T204833 [mbts_sci2:Lap:Wpt2:A]:Setting YoYoMaxDepth = 100.000000 m

20250609T211140 [CTD_Seabird]:Failed to parse device response: 96.33,9.071.31#

20250609T211433 [GFScanner]:Beginning ground fault scan

20250609T213458 [CTD_Seabird]:Failed to parse device response: .55#

20250609T214036 [CTD_Seabird]:Salinity reading out of range: 24.563898 psu

20250609T214101 [CTD_Seabird]:Salinity reading out of range: 27.008051 psu

20250609T214459 [BPC1]:BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250609T214537 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250609T214802 [NAL9602]:Queried for signal strength and failed to receive proper response.

20250609T214937 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 37, 50, 51, 54, 55.

20250609T215055 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250609T215057 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250609T215101 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250609T220211 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250609T221012 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250609T222248 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250609T223010 [CTD_Seabird]:Failed to parse device response: .15#

20250609T223039 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 37, 50, 51, 54, 55.

20250609T231141 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 37, 50, 51, 54, 55.

20250609T232410 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250609T232416 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250609T232855 [CTD_Seabird]:Failed to parse device response: 6.58,13.928.92#

20250609T232856 [ThrusterHE]:getSpeed error serial timeout

20250609T232856 [ThrusterHE]:Thruster uart error: serial timeout

20250609T232856 [ThrusterHE]:Communications Fault

20250609T232856 [CBIT]:Communications Fault in component: ThrusterHE

20250609T233415 [CTD_Seabird]:Failed to parse device response: 88.98,9.450.43#

20250610T001801 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250610T003241 [BPC1]:BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250610T003926 [CTD_Seabird]:Failed to parse device response: 30.85,77#

20250610T012313 [CTD_Seabird]:Failed to parse device response: 9,3.78310,3067.97#

20250610T013009 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250610T014947 [BPC1]:BPC1A: No match for serial number FFFF in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250610T015548 [BPC1]:Failed to receive data from 7 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 37, 50, 51, 54.

20250610T015618 [CTD_Seabird]:Failed to parse device response: 92004.53#

20250610T022457 [CTD_Seabird]:Failed to parse device response: 1.83,37#

20250610T022756 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250610T023650 [BPC1]:Failed to receive data from 7 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 37, 50, 51, 54.

20250610T030234 [mbts_sci2:Lap:Wpt3:A]:Setting YoYoMaxDepth = 200.000000 m

20250610T031433 [GFScanner]:Beginning ground fault scan

20250610T031752 [BPC1]:Battery stick #1 (s/n: 0266) reported OVER_TEMP_ALARM. Status code: 0x1717.

20250610T031752 [BPC1]:Failed to receive data from 7 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 37, 50, 51, 54.

20250610T032229 [ThrusterHE]:Could not get status:serial timeout

20250610T033501 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250610T040714 [CTD_Seabird]:Failed to parse device response: 77.10,71#

20250610T041122 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250610T041651 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250610T042532 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250610T042640 [CTD_Seabird]:Failed to parse device response: 160.2069,1575.57#

20250610T043501 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20250610T044454 [CTD_Seabird]:Failed to parse device response: 99,2126.99#

20250610T050844 [ThrusterHE]:Could not get status:serial timeout

20250610T052057 [BPC1]:Failed to receive data from 6 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 50, 51, 54.

20250610T060159 [BPC1]:Failed to receive data from 6 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 50, 51, 54.

20250610T064301 [BPC1]:Failed to receive data from 6 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 36, 50, 51, 54.

20250610T065833 [CTD_Seabird]:Failed to parse device response: 23,1617.62#

20250610T075433 [CTD_Seabird]:Salinity reading out of range: 20.134462 psu

20250610T084606 [BPC1]:Failed to receive data from 11 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 38, 39, 50, 51, 54, 55.

20250610T085311 [RudderServo]:getPosition uart error serial timeout

20250610T085311 [RudderServo]:Rudder uart error - getPosition..serial timeout

20250610T085311 [RudderServo]:Communications Fault

20250610T085311 [CBIT]:Communications Fault in component: RudderServo

20250610T090516 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250610T090712 [mbts_sci2:NeedComms:C:A_Timeout:A]:first GPS update timeout

20250610T090742 [NAL9602]:Queried for signal strength and failed to receive proper response.

20250610T091122 [NAL9602]:GPS failed to acquire within timeout.

20250610T091122 [CBIT]:Data Fault in component: NAL9602

20250610T092708 [BPC1]:Failed to receive data from 10 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 38, 39, 51, 54, 55.

20250610T095412 [CTD_Seabird]:Failed to parse device response: 0,3.66834,1557.26#

20250610T100809 [BPC1]:Failed to receive data from 10 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 38, 39, 51, 54, 55.

20250610T104911 [BPC1]:Failed to receive data from 10 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 38, 39, 51, 54, 55.

20250610T113013 [BPC1]:Failed to receive data from 9 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 38, 39, 51, 54.

20250610T113743 [ThrusterHE]:Could not get status:serial timeout

20250610T115857 [BuoyancyServo]:getPosition uart error serial timeout

20250610T115857 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20250610T115857 [BuoyancyServo]:Communications Fault

20250610T115857 [CBIT]:Communications Fault in component: BuoyancyServo

20250610T121115 [BPC1]:Failed to receive data from 9 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 38, 39, 51, 54.

20250610T130602 [MassServo]:getPosition uart error serial timeout

20250610T130602 [MassServo]:Invalid EZ Servo response:"\377"

20250610T130602 [MassServo]:Communications Fault

20250610T130602 [CBIT]:Communications Fault in component: MassServo

20250610T133221 [CTD_Seabird]:Failed to parse device response: 00,1687.72#

20250610T140153 [CTD_Seabird]:Failed to parse device response: 11462.06#

20250610T143854 [CTD_Seabird]:Failed to parse device response: 97.57.88#

20250610T153624 [BPC1]:Failed to receive data from 9 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 39, 50, 51, 54.

20250610T162134 [ThrusterHE]:getSpeed error serial timeout

20250610T162134 [ThrusterHE]:Thruster uart error: serial timeout

20250610T162134 [ThrusterHE]:Communications Fault

20250610T162134 [CBIT]:Communications Fault in component: ThrusterHE

20250610T180123 [ElevatorServo]:getPosition uart error serial timeout

20250610T180123 [ElevatorServo]:Elevator uart error - getPosition.serial timeout

20250610T180123 [ElevatorServo]:Communications Fault

20250610T180123 [CBIT]:Communications Fault in component: ElevatorServo

20250610T190134 [BPC1]:Failed to receive data from 11 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 38, 39, 50, 51, 54, 55.

20250610T194235 [BPC1]:Failed to receive data from 11 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 32, 33, 34, 35, 36, 38, 39, 50, 51, 54, 55.

20250610T201610 [CTD_Seabird]:Failed to parse device response: 8.68878,2022.83#

20250610T203337 [CTD_Seabird]:Failed to parse device response: ,3.73492,2256.50#

20250610T203546 [mbts_sci2:Logs:A:B]:Restarting logs.