daphne Path

trajectory

20241007T175857 [MissionManager]:Started mission Default

20241007T175915 [NAL9602]:Failed to initiate SBD session. Error code: 2

20241007T180004 [NAL9602]:Failed to initiate SBD session. Error code: 2

20241007T180017 [CommandExec]:got command strobe off

20241007T180017 [CommandExec]:Deactivating strobe

20241007T180227 [RudderServo]:getPosition uart error serial timeout

20241007T180227 [RudderServo]:Rudder uart error - getPosition..serial timeout

20241007T180227 [RudderServo]:Communications Fault

20241007T180227 [CBIT]:Communications Fault in component: RudderServo

20241007T180621 [Default:CheckIn:E]:Default mission has been running for 7.398731 min

20241007T180707 [CommandExec]:got command report touch NAL9602.sigQuality

20241007T180849 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20241007T180908 [CommandExec]:got command ! echo 0 > /dev/loadB6

20241007T181154 [Default:CheckIn:E]:Default mission has been running for 12.934164 min

20241007T181219 [NAL9602]:Failed to initiate SBD session. Error code: 2

20241007T181908 [Default:CheckIn:E]:Default mission has been running for 20.176782 min

20241007T182007 [CommandExec]:got command ! grep -i sigquality /mnt/mmc/LRAUV/Logs/latest/syslog

20241007T182734 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20241007T183148 [CommandExec]:got command ! grep -i sigquality /mnt/mmc/LRAUV/Logs/latest/syslog

20241007T184135 [DropWeight]:DROP WEIGHT MISSING.#

20241007T184135 [DropWeight]:Hardware Fault

20241007T184135 [CBIT]:Hardware Fault in component: DropWeight

20241007T190142 [CommandExec]:got command configSet Express linearApproximation platform_roll_angle 0.1 degree persist

20241007T191042 [CommandExec]:got command configSet Express linearApproximation platform_pitch_angle 0.1 degree persist

20241007T191118 [NAL9602]:Inadequate Iridium signal strength reported: 0

20241007T191122 [NAL9602]:Inadequate Iridium signal strength reported: 0

20241007T191131 [NAL9602]:Inadequate Iridium signal strength reported: 0

20241007T191923 [CommandExec]:got command configSet Express linearApproximation platform_elevator_angle 0.1 degree persist

20241007T191923 [CommandExec]:got command configSet Express linearApproximation platform_rudder_angle 0.1 degree persist

20241007T191950 [CommandExec]:got command ibit

20241007T191951 [IBIT]:Beginning Initiated BIT

20241007T191951 [IBIT]:Beginning control surface checks.

20241007T191951 [CBIT]:Beginning ground fault scan

20241007T192001 [CBIT]:Ground fault scan returned out of bounds value. Re-running scan.

20241007T192002 [CBIT]:Beginning ground fault scan

20241007T192006 [IBIT]:Control surface position failure.

20241007T192013 [CBIT]:Ground fault scan returned out of bounds value. Re-running scan.

20241007T192014 [CBIT]:Beginning ground fault scan

20241007T192051 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 1#Latitude: 36.802883 Longitude: -121.788078

20241007T192051 [IBIT]:batteryCapacityThreshold: 50.000000 Ah

20241007T192051 [IBIT]:batteryVoltageThreshold: 13.700000 V

20241007T192054 [IBIT]:bitPressureThreshold: 0.750000 psi

20241007T192637 [DropWeight]:DROP WEIGHT MISSING.#

20241007T192637 [DropWeight]:Hardware Fault

20241007T192637 [CBIT]:Hardware Fault in component: DropWeight

20241007T192735 [CommandExec]:got command ! grep -i sigquality /mnt/mmc/LRAUV/Logs/latest/syslog

20241007T192754 [CommandExec]:got command ibit

20241007T192754 [IBIT]:Beginning Initiated BIT

20241007T192754 [IBIT]:Beginning control surface checks.

20241007T192807 [CBIT]:Ground fault scan returned out of bounds value. Re-running scan.

20241007T192831 [CBIT]:Ground fault scan returned out of bounds value in succession 3 times. Will re-run scan on normal schedule.

20241007T192840 [BPC1]:BPC1B got IPBS message with 4 sticks (min is 7).

20241007T192841 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 5#Latitude: 36.802898 Longitude: -121.788094

20241007T192842 [IBIT]:batteryCapacityThreshold: 50.000000 Ah

20241007T192842 [IBIT]:batteryVoltageThreshold: 13.700000 V

20241007T192842 [IBIT]:bitPressureThreshold: 0.750000 psi

20241007T192853 [BPC1]:BPC1B got IPBS message with 4 sticks (min is 7).

20241007T192904 [BPC1]:BPC1B got IPBS message with 4 sticks (min is 7).

20241007T193756 [CommandExec]:got command ! echo 1 > /dev/loadB6

20241007T195501 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20241007T195758 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20241007T195835 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20241007T200542 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20241007T201138 [DropWeight]:DROP WEIGHT MISSING.#

20241007T201138 [DropWeight]:Hardware Fault

20241007T201138 [CBIT]:Hardware Fault in component: DropWeight

20241007T201217 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20241007T202218 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20241007T202851 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20241007T205628 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20241007T210416 [CommandExec]:got command restart application