daphne Path

trajectory

20221018T193521 [CommandExec]:got command restart logs

20221018T194733 [Default:CheckIn:E]:Default mission has been running for 36.485612 min

20221018T194810 [NAL9602]:Failed to initiate SBD session. Error code: 2

20221018T195413 [Default:CheckIn:E]:Default mission has been running for 43.151265 min

20221018T195947 [Default:CheckIn:E]:Default mission has been running for 48.709408 min

20221018T200716 [NAL9602]:Failed to initiate SBD session. Error code: 2

20221018T201116 [NAL9602]:Failed to initiate SBD session. Error code: 2

20221018T201515 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20221018T201530 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20221018T201545 [BPC1]:BPC1A got IPBS message with 6 sticks (min is 7).

20221018T212105 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20221018T212734 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20221018T213206 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20221018T214310 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20221018T214938 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20221018T220035 [DropWeight]:DROP WEIGHT MISSING.#

20221018T220035 [DropWeight]:Hardware Fault

20221018T220035 [CommandExec]:Scheduling is paused

20221018T220035 [CBIT]:Hardware Fault in component: DropWeight

20221018T220049 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20221018T224536 [DropWeight]:DROP WEIGHT MISSING.#

20221018T224536 [DropWeight]:Hardware Fault

20221018T224536 [CBIT]:Hardware Fault in component: DropWeight

20221018T233038 [DropWeight]:DROP WEIGHT MISSING.#

20221018T233038 [DropWeight]:Hardware Fault

20221018T233038 [CBIT]:Hardware Fault in component: DropWeight

20221018T235034 [NAL9602]:LCB fault: Invalid Command. Hardware Overcurrent Shutdown. Current Limiter Activated.

20221018T235034 [CBIT]:Hardware Fault in component: NAL9602

20221018T235633 [NAL9602]:parseGSV uart error: serial timeout

20221019T000632 [NAL9602]:GPS failed to acquire within timeout.

20221019T000632 [CBIT]:Data Fault in component: NAL9602

20221019T002728 [NAL9602]:GPS failed to acquire within timeout.

20221019T002728 [CBIT]:Data Fault in component: NAL9602

20221019T004216 [CBIT]:Beginning ground fault scan

20221019T004219 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20221019T004824 [NAL9602]:GPS failed to acquire within timeout.

20221019T004824 [CBIT]:Data Fault in component: NAL9602

20221019T064227 [CBIT]:Beginning ground fault scan

20221019T064230 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20221019T094113 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20221019T124239 [CBIT]:Beginning ground fault scan

20221019T124241 [CBIT]:Error reading 24V bus power status. Assuming off for scan purposes.

20221019T135149 [CBIT]:Run-time exception #7

20221019T135149 [CBIT]:Software Fault

20221019T135200 [AHRS_M2]:Failed to acquire valid data within timeout.

20221019T135323 [CommandExec]:got command ibit

20221019T135323 [IBIT]:Beginning Initiated BIT

20221019T135323 [IBIT]:Beginning control surface checks.

20221019T135325 [NAL9602]:LCB fault: Current Limiter Activated.

20221019T135326 [NAL9602]:LCB fault: Current Limiter Activated.

20221019T135334 [CommandExec]:got command quit