daphne Path

trajectory

20200629T210927 [CommandLine]:got command run ./Missions/Insert/Science.xml

20200629T210929 [CommandLine]:Running ./Missions/Insert/Science.xml

20200629T210929 [MissionManager]:Started mission Science

20200629T210932 [CTD_Seabird]:Failed to parse device response: #

20200629T210933 [CTD_Seabird]:Salinity reading out of range: 3.138571 psu

20200629T210934 [CTD_Seabird]:Salinity reading out of range: 26.642616 psu

20200629T210955 [CommandLine]:got command maintain control VerticalControl.buoyancyAction 500.000000 cubic_centimeter

20200629T211328 [CommandLine]:got command maintain control VerticalControl.buoyancyAction 300.000000 cubic_centimeter

20200629T211458 [CommandLine]:got command maintain clear

20200629T211644 [CommandLine]:got command report mod platform_buoyancy_position

20200629T211648 [CommandLine]:got command load ./Missions/Maintenance/tank_ballast_and_trim.xml

20200629T211651 [CommandLine]:Loaded ./Missions/Maintenance/tank_ballast_and_trim.xml

20200629T211651 [MissionManager]:Started mission Default

20200629T211701 [CommandLine]:got command set ballast_and_trim.MissionTimeout 90.000000 minute

20200629T211701 [CommandLine]:got command set ballast_and_trim.MaxWaitOnSurface 7.000000 minute

20200629T211701 [CommandLine]:got command set ballast_and_trim.EstimationTimeout 35.000000 minute

20200629T211701 [CommandLine]:got command set ballast_and_trim.WaitToFloat 1.000000 minute

20200629T211701 [CommandLine]:got command run

20200629T211701 [CommandLine]:Running

20200629T211701 [MissionManager]:Started mission ballast_and_trim

20200629T211705 [CTD_Seabird]:Failed to parse device response: #

20200629T213535 [DropWeight]:DROP WEIGHT MISSING.#

20200629T213535 [DropWeight]:Hardware Fault

20200629T213535 [CBIT]:Hardware Fault in component: DropWeight

20200629T213536 [MissionManager]:Started mission Default

20200629T213536 [WetLabsBB2FL]:LCB fault: Software Overcurrent.

20200629T213536 [WetLabsBB2FL]:Hardware Fault

20200629T213536 [CBIT]:Hardware Fault in component: WetLabsBB2FL

20200629T214311 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20200629T214629 [CommandLine]:got command failComponent

20200629T214629 [CommandLine]:Failed components:

20200629T214629 [CommandLine]:DropWeight: Hardware Fault

20200629T214634 [CommandLine]:got command failComponent none DropWeight

20200629T214634 [CommandLine]:DropWeight failureMode is No Fault

20200629T214645 [CommandLine]:got command failComponent

20200629T214645 [CommandLine]:Failed components:

20200629T214645 [CommandLine]:No failed Components.

20200629T214655 [CommandLine]:got command failComponent

20200629T214655 [CommandLine]:Failed components:

20200629T214655 [CommandLine]:No failed Components.

20200629T214738 [CommandLine]:got command load ./Missions/Maintenance/tank_ballast_and_trim.xml

20200629T214739 [CommandLine]:Loaded ./Missions/Maintenance/tank_ballast_and_trim.xml

20200629T214749 [CommandLine]:got command set ballast_and_trim.MissionTimeout 90.000000 minute

20200629T214749 [CommandLine]:got command set ballast_and_trim.MaxWaitOnSurface 7.000000 minute

20200629T214749 [CommandLine]:got command set ballast_and_trim.EstimationTimeout 35.000000 minute

20200629T214749 [CommandLine]:got command set ballast_and_trim.WaitToFloat 1.000000 minute

20200629T214749 [CommandLine]:got command run

20200629T214749 [CommandLine]:Running

20200629T214749 [MissionManager]:Started mission ballast_and_trim

20200629T214753 [CTD_Seabird]:Failed to parse device response: #

20200629T215004 [CTD_Seabird]:Failed to parse device response: 33154,4.35015,0.00#

20200629T215101 [BuoyancyServo]:getPosition uart error serial timeout

20200629T215101 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20200629T215101 [BuoyancyServo]:Communications Fault

20200629T215101 [CBIT]:Communications Fault in component: BuoyancyServo

20200629T215112 [CTD_Seabird]:Failed to parse device response: 8.14,,4.34839,0.00#

20200629T215350 [BuoyancyServo]:getPosition uart error serial timeout

20200629T215350 [BuoyancyServo]:Buoyancy getPosition uart error.serial timeout

20200629T215350 [BuoyancyServo]:Communications Fault

20200629T215350 [CBIT]:Communications Fault in component: BuoyancyServo

20200629T222835 completed. Estimation time: 27.77 minutes.

20200629T222835 persisted config values to: 420.679403 cc buoyancy neutral and -18.033363 mm mass default

20200629T222937 [MissionManager]:Started mission Default

20200629T223029 [NAL9602]:GPS failed to acquire within timeout.

20200629T223029 [CBIT]:Data Fault in component: NAL9602

20200629T223614 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20200629T224106 [Default:CheckIn:E]:Default mission has been running for 11.472980 min

20200629T224139 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20200629T224139 [CBIT]:Data Fault in component: NAL9602

20200629T224635 [Default:CheckIn:E]:Default mission has been running for 16.961388 min

20200629T224640 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20200629T225339 [Default:CheckIn:E]:Default mission has been running for 24.025110 min

20200629T230409 [NAL9602]:GPS failed to acquire within timeout.

20200629T230409 [CBIT]:Data Fault in component: NAL9602

20200629T230640 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20200629T230640 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20200629T230651 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20200629T230651 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20200629T230702 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20200629T230702 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20200629T231844 [BPC1]:Failed to receive data from all battery packs.

20200629T231844 [BPC1]:Communications Fault

20200629T231844 [CBIT]:Communications Fault in component: BPC1

20200629T232504 [NAL9602]:GPS failed to acquire within timeout.

20200629T233804 [BPC1]:Failed to receive data from all battery packs.

20200629T233804 [BPC1]:Communications Fault

20200629T233804 [CBIT]:Communications Fault in component: BPC1

20200629T235729 [BPC1]:Failed to receive data from all battery packs.

20200629T235729 [BPC1]:Communications Fault

20200629T235729 [CBIT]:Communications Fault in component: BPC1

20200630T014151 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20200630T015219 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20200630T023336 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).

20200630T024359 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20200630T025204 [CBIT]:Beginning ground fault scan

20200630T041500 [CBIT]:Data Fault in component: BPC1

20200630T045602 [CBIT]:Data Fault in component: BPC1

20200630T053704 [CBIT]:Data Fault in component: BPC1

20200630T063746 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20200630T085215 [CBIT]:Beginning ground fault scan

20200630T145226 [CBIT]:Beginning ground fault scan

20200630T152124 [NAL9602]:Failed to initiate SBD session. Error code: 2

20200630T152447 [CommandLine]:No failed Components.

20200630T152458 [CommandLine]:got command run ./Missions/Insert/Science.xml

20200630T152459 [CommandLine]:Running ./Missions/Insert/Science.xml

20200630T152500 [MissionManager]:Started mission Science

20200630T152504 [CTD_Seabird]:Salinity reading out of range: 17.713953 psu

20200630T152527 [CommandLine]:got command maintain control VerticalControl.buoyancyAction 300.000000 cubic_centimeter

20200630T152750 [CommandLine]:got command maintain control VerticalControl.massPositionAction -5.000000 millimeter

20200630T152906 [CommandLine]:got command maintain control VerticalControl.massPositionAction -9.000000 millimeter

20200630T153006 [CommandLine]:got command maintain clear

20200630T153114 [CommandLine]:got command load ./Missions/Maintenance/tank_ballast_and_trim.xml

20200630T153116 [CommandLine]:Loaded ./Missions/Maintenance/tank_ballast_and_trim.xml

20200630T153126 [CommandLine]:got command set ballast_and_trim.MissionTimeout 90.000000 minute

20200630T153126 [CommandLine]:got command set ballast_and_trim.MaxWaitOnSurface 7.000000 minute