daphne Path

trajectory

20190509T145906 [DVL_micro]:DVL failed to acquire valid data within timeout.

20190509T145906 [DVL_micro]:Data Fault

20190509T145906 [CBIT]:Data Fault in component: DVL_micro

20190509T145918 [DVL_micro]:only read 42 of 46 data items

20190509T150212 [DVL_micro]:DVL failed to acquire valid data within timeout.

20190509T150212 [DVL_micro]:Data Fault

20190509T150212 [CBIT]:Data Fault in component: DVL_micro

20190509T150323 [Default:CheckIn:E]:Default mission has been running for 28.423244 min

20190509T150518 [DVL_micro]:DVL failed to acquire valid data within timeout.

20190509T150518 [DVL_micro]:Data Fault

20190509T150518 [CBIT]:Data Fault in component: DVL_micro

20190509T150811 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190509T150850 [Default:CheckIn:E]:Default mission has been running for 33.871436 min

20190509T151433 [Default:CheckIn:E]:Default mission has been running for 39.588826 min

20190509T151539 [DVL_micro]:only read 43 of 46 data items

20190509T151615 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190509T151650 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190509T151948 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190509T152523 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190509T152532 [DVL_micro]:only read 45 of 46 data items

20190509T153046 [NAL9602]:GPS failed to acquire within timeout.

20190509T153046 [CBIT]:Data Fault in component: NAL9602

20190509T153631 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190509T154142 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190509T154142 [CBIT]:Data Fault in component: NAL9602

20190509T154143 [NAL9602]:LCB fault: Software Overcurrent.

20190509T154225 [NAL9602]:GPS failed to acquire within timeout.

20190509T154225 [CBIT]:Data Fault in component: NAL9602

20190509T154637 [DVL_micro]:checksum mismatch: reported73 , calculated:84

20190509T155213 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190509T161553 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190509T164725 [DVL_micro]:No DVL communication! Re-initializing

20190509T164725 [DVL_micro]:Communications Fault

20190509T164725 [CBIT]:Communications Fault in component: DVL_micro

20190509T165654 [NAL9602]:GPS failed to acquire within timeout.

20190509T182715 [DAT]:Communications Fault

20190509T182715 [CBIT]:Communications Fault in component: DAT

20190509T182716 [DAT]:LCB fault: Software Overcurrent.

20190509T182716 [DAT]:Hardware Fault

20190509T182719 [CommandLine]:got command ! echo 1 > /dev/loadB2

20190509T193850 [CommandLine]:Scheduling is paused

20190509T203226 [CBIT]:Beginning ground fault scan

20190509T203412 [DAT]:Communications Fault

20190509T203412 [CBIT]:Communications Fault in component: DAT

20190509T203415 [CommandLine]:got command ! echo 1 > /dev/loadB2

20190509T210059 [DVL_micro]:checksum mismatch: reported82 , calculated:81

20190509T211606 [DAT]:Communications Fault

20190509T211606 [CBIT]:Communications Fault in component: DAT

20190509T211610 [CommandLine]:got command ! echo 1 > /dev/loadB2

20190509T213819 [DVL_micro]:checksum mismatch: reported79 , calculated:87

20190509T215105 [DAT]:unknown deviceResponse_: et for address 0##

20190510T000356 [DVL_micro]:No DVL communication! Re-initializing

20190510T000356 [DVL_micro]:Communications Fault

20190510T000356 [CBIT]:Communications Fault in component: DVL_micro

20190510T014324 [DAT]:LCB fault: Software Overcurrent.

20190510T014324 [DAT]:Hardware Fault

20190510T014935 [DVL_micro]:No DVL communication! Re-initializing

20190510T014935 [DVL_micro]:Communications Fault

20190510T014935 [CBIT]:Communications Fault in component: DVL_micro

20190510T023237 [CBIT]:Beginning ground fault scan

20190510T052949 [DAT]:unknown deviceResponse_: :002 Mod:MFSK##

20190510T064319 [NAL9602]:LCB fault: Software Overcurrent.

20190510T083248 [CBIT]:Beginning ground fault scan

20190510T124833 [NAL9602]:LCB fault: Software Overcurrent.

20190510T133533 [DAT]:failed to initialize; deviceResponse_ loaded: ##Teledyne Benthos DAT-900 Series##MF Frequency Band##Directional Acoustic Transponder version 8.12.21##May 10 2019 13:32:30 ##Features enabled [Bearing]##CONNECT, available: /sec 1 of 4, Rate 1/2 CC 12.50ms MGP##Forwarding Delay UpTx time:13:32:38.3564###�?

20190510T133534 [DAT]:LCB fault: Software Overcurrent.

20190510T133534 [DAT]:Hardware Fault

20190510T173717 [DAT]:unknown deviceResponse_: cket for address 0##

20190510T194445 [DAT]:unknown deviceResponse_: 04.0 CCERR:002 Mod:MFSK##

20190510T211411 [DAT]:unknown deviceResponse_: address 0##

20190510T233914 [Default:D]:Restarting logs and Default mission.