daphne Path

trajectory

20190501T182442 [CommandLine]:got command failComponent

20190501T182442 [CommandLine]:Failed components:

20190501T182442 [CommandLine]:No failed Components.

20190501T182724 [DVL_micro]:DVL failed to acquire valid data within timeout.

20190501T182724 [DVL_micro]:Data Fault

20190501T182724 [CBIT]:Data Fault in component: DVL_micro

20190501T183030 [DVL_micro]:DVL failed to acquire valid data within timeout.

20190501T183030 [DVL_micro]:Data Fault

20190501T183030 [CBIT]:Data Fault in component: DVL_micro

20190501T183050 [Default:CheckIn:E]:Default mission has been running for 9.009512 min

20190501T183134 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190501T183134 [CBIT]:Data Fault in component: NAL9602

20190501T183320 [DVL_micro]:only read 17 of 46 data items

20190501T183336 [DVL_micro]:DVL failed to acquire valid data within timeout.

20190501T183336 [DVL_micro]:Data Fault

20190501T183336 [CBIT]:Data Fault in component: DVL_micro

20190501T183802 [Default:CheckIn:E]:Default mission has been running for 16.207561 min

20190501T183911 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190501T183952 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190501T184357 [CommandLine]:got command ibit

20190501T184357 [IBIT]:Beginning Initiated BIT

20190501T184357 [IBIT]:Beginning control surface checks.

20190501T184357 [CBIT]:Beginning ground fault scan

20190501T184459 [IBIT]:Communications Status:#Fix Status: 1#Iridium Signal Strength: 4#Latitude: 36.802753 Longitude: -121.786896

20190501T184459 [IBIT]:Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.

20190501T184500 [IBIT]:bitPressureThreshold: 0.750000 psi

20190501T184538 [Default:CheckIn:E]:Default mission has been running for 23.802852 min

20190501T184613 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190501T184856 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20190501T184939 [DVL_micro]:only read 45 of 46 data items

20190501T185015 [DVL_micro]:only read 44 of 46 data items

20190501T185053 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190501T185247 [CommandLine]:got command ibit

20190501T185247 [IBIT]:Beginning Initiated BIT

20190501T185247 [IBIT]:Beginning control surface checks.

20190501T185247 [CBIT]:Beginning ground fault scan

20190501T185330 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190501T185331 [CBIT]:Data Fault in component: NAL9602

20190501T185438 [IBIT]:Error acquiring IBIT communications status. Timeout expired.

20190501T185439 [IBIT]:Battery Status:#Battery Charge (AH): 0.000000#Voltage: 0.000000

20190501T185439 [IBIT]:batteryCapacityThreshold: 50.000000 Ah

20190501T185439 [IBIT]:batteryVoltageThreshold: 13.700000 V

20190501T185439 [IBIT]:bitPressureThreshold: 0.750000 psi

20190501T185642 [NAL9602]:GPS failed to acquire within timeout.

20190501T185642 [CBIT]:Data Fault in component: NAL9602

20190501T185756 [CommandLine]:got command load ./Missions/Science/sci2.xml

20190501T185758 [CommandLine]:Loaded ./Missions/Science/sci2.xml

20190501T185807 [CommandLine]:got command set sci2.NeedCommsTime 30.000000 minute

20190501T185807 [CommandLine]:got command set sci2.Lat1 36.750000 degree

20190501T185807 [CommandLine]:got command set sci2.Lon1 -122.022003 degree

20190501T185807 [CommandLine]:got command set sci2.YoYoMaxDepth 20.000000 meter

20190501T185807 [CommandLine]:got command set sci2.MaxDepth 30.000000 meter

20190501T185807 [CommandLine]:got command run

20190501T185807 [CommandLine]:Running

20190501T185807 [MissionManager]:Started mission sci2

20190501T185809 [sci2:M.AltitudeEnvelope]:Altitude Measurement is not Active.

20190501T185809 [sci2:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20190501T185809 [CTD_NeilBrown]:Salinity reading out of range: 1617.261475 psu

20190501T185810 [CTD_NeilBrown]:Salinity reading out of range: 2213.164062 psu

20190501T185810 [CTD_NeilBrown]:Salinity reading out of range: 2703.711426 psu

20190501T185810 [CTD_Seabird]:Failed to parse device response: #

20190501T185812 [CTD_Seabird]:Salinity reading out of range: 0.121002 psu

20190501T185813 [CTD_Seabird]:Salinity reading out of range: 0.118589 psu

20190501T185814 [CTD_Seabird]:Salinity reading out of range: 0.116973 psu

20190501T185839 [CommandLine]:got command stop

20190501T185839 [CommandLine]:Scheduling is paused

20190501T185840 [MissionManager]:Started mission Default

20190501T190640 [DVL_micro]:checksum mismatch: reported98 , calculated:112