daphne Path

trajectory

20190423T175332 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20190423T175332 [Rowe_600LCM]:Communications Fault

20190423T175332 [CBIT]:Communications Fault in component: Rowe_600LCM

20190423T175504 [CommandLine]:got command get CANONSampler.uart

20190423T175504 [CommandLine]:CANONSampler.uart /dev/ttyB1

20190423T175530 [CommandLine]:got command get CANONSampler.loadControl

20190423T175530 [CommandLine]:CANONSampler.loadControl /dev/loadB1

20190423T175535 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20190423T175535 [Rowe_600LCM]:Communications Fault

20190423T175535 [CBIT]:Communications Fault in component: Rowe_600LCM

20190423T180054 [CommandLine]:got command load ./Missions/Maintenance/sample.xml

20190423T180055 [CommandLine]:Loaded ./Missions/Maintenance/sample.xml

20190423T180105 [CommandLine]:got command set sample.MissionTimeout 120.000000 minute

20190423T180105 [CommandLine]:got command set sample.Depth 9.000000 meter

20190423T180105 [CommandLine]:got command set sample.NumberOfSamples 15.000000 count

20190423T180105 [CommandLine]:got command set sample.WaitBeforeSample 30.000000 second

20190423T180105 [CommandLine]:got command set sample:SampleAtDepth.TargetDepth 9.000000 meter

20190423T180105 [CommandLine]:got command run

20190423T180105 [CommandLine]:Running

20190423T180105 [MissionManager]:Started mission sample

20190423T180506 [sample:SampleAtDepth:SampleWrapper:B]:At 9.010335 m , settling for 0.500000 min

20190423T180549 sampling at 9.932312 m in nan degC water with nan ug/l chlorophyll fluorescence.

20190423T180736 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20190423T180736 [Rowe_600LCM]:Communications Fault

20190423T180736 [CBIT]:Communications Fault in component: Rowe_600LCM

20190423T180843 [CANONSampler]:Sample 1, err_code=0##

20190423T180940 [BuoyancyServo]:Reading outside of valid range:0.000000#

20190423T180940 [BuoyancyServo]:Buoyancy engine reporting null position

20190423T180940 [BuoyancyServo]:Hardware Fault

20190423T180940 [CBIT]:Hardware Fault in component: BuoyancyServo

20190423T181217 [sample:SampleAtDepth:SampleWrapper:B]:At 8.997337 m , settling for 0.500000 min

20190423T181300 sampling at 9.436231 m in nan degC water with nan ug/l chlorophyll fluorescence.

20190423T181548 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20190423T181548 [Rowe_600LCM]:Hardware Fault

20190423T181552 [CANONSampler]:Sample 2, err_code=0##

20190423T181621 [sample:SampleAtDepth:SampleWrapper:B]:At 9.006869 m , settling for 0.500000 min

20190423T181624 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20190423T181705 sampling at 9.994701 m in nan degC water with nan ug/l chlorophyll fluorescence.

20190423T181957 [CANONSampler]:Sample 3, err_code=0##

20190423T183559 [BuoyancyServo]:Reading outside of valid range:0.000000#

20190423T183559 [BuoyancyServo]:Buoyancy engine reporting null position

20190423T183559 [BuoyancyServo]:Hardware Fault

20190423T183559 [CBIT]:Hardware Fault in component: BuoyancyServo

20190423T185610 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20190423T185610 [Rowe_600LCM]:Hardware Fault

20190423T185620 [CANONSampler]:Failed to complete sampling within timeout

20190423T185620 [CANONSampler]:Hardware Fault

20190423T185620 [CBIT]:Hardware Fault in component: CANONSampler

20190423T185620 out sampling with CANONSampler. Stopping mission.

20190423T185621 [CommandLine]:got command stop

20190423T185621 [CommandLine]:Scheduling is paused

20190423T185621 [MissionManager]:Started mission Default

20190423T190039 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190423T190102 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190423T190157 [NAL9602]:Failed to initiate SBD session. Error code: 2

20190423T190328 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190423T190918 [Default:CheckIn:E]:Default mission has been running for 12.932841 min

20190423T190930 [NAL9602]:GPS failed to acquire within timeout.

20190423T190930 [CBIT]:Data Fault in component: NAL9602

20190423T191515 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190423T191948 [Default:CheckIn:E]:Default mission has been running for 23.437120 min

20190423T192032 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190423T192032 [CBIT]:Data Fault in component: NAL9602

20190423T192114 [NAL9602]:GPS failed to acquire within timeout.

20190423T192114 [CBIT]:Data Fault in component: NAL9602

20190423T192503 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20190423T193129 [Default:CheckIn:E]:Default mission has been running for 35.126888 min

20190423T193213 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190423T193256 [NAL9602]:GPS failed to acquire within timeout.

20190423T193256 [CommandLine]:Scheduling is paused

20190423T194238 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20190423T194725 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20190423T211826 [BPC1]:Failed to receive data from all sticks prior to timeout. Will not retry this scan cycle.

20190423T215547 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20190423T215547 [Rowe_600LCM]:Hardware Fault

20190423T234558 [CBIT]:Beginning ground fault scan

20190424T002028 [BPC1]:Failed to receive data from 5 sticks prior to timeout. Missing stick IDs are: 40, 41, 43, 45, 47.

20190424T002028 [CBIT]:Data Fault in component: BPC1

20190424T005721 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20190424T010130 [BPC1]:Failed to receive data from 4 sticks prior to timeout. Missing stick IDs are: 40, 41, 43, 45.

20190424T010130 [CBIT]:Data Fault in component: BPC1

20190424T014232 [BPC1]:Failed to receive data from 5 sticks prior to timeout. Missing stick IDs are: 40, 41, 43, 45, 46.

20190424T014232 [CBIT]:Data Fault in component: BPC1

20190424T022334 [BPC1]:Failed to receive data from 3 sticks prior to timeout. Missing stick IDs are: 43, 45, 46.

20190424T024055 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20190424T030436 [BPC1]:Failed to receive data from 3 sticks prior to timeout. Missing stick IDs are: 43, 45, 46.

20190424T033613 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).

20190424T034538 [BPC1]:Failed to receive data from 3 sticks prior to timeout. Missing stick IDs are: 43, 45, 46.

20190424T041513 [Rowe_600LCM]:LCB fault: Current Limiter Activated.

20190424T042640 [BPC1]:Failed to receive data from 2 sticks prior to timeout. Missing stick IDs are: 43, 45.

20190424T045134 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20190424T050742 [BPC1]:Failed to receive data from 2 sticks prior to timeout. Missing stick IDs are: 43, 45.

20190424T054609 [CBIT]:Beginning ground fault scan

20190424T054844 [BPC1]:Failed to receive data from 2 sticks prior to timeout. Missing stick IDs are: 43, 45.

20190424T060604 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20190424T065208 [CommandLine]:got command quit