2018-10-08T05:24:31.220Z,1538976271.220 [Supervisor](DEBUG): Initializing supervisor.
2018-10-08T05:24:31.223Z,1538976271.223 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-10-08T05:24:31.224Z,1538976271.224 [SyncHandler](INFO): Protected caller Thread ID is 798
2018-10-08T05:24:31.224Z,1538976271.224 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-10-08T05:24:31.225Z,1538976271.225 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-10-08T05:24:31.226Z,1538976271.226 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 799
2018-10-08T05:24:31.228Z,1538976271.228 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-10-08T05:24:31.241Z,1538976271.241 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-10-08T05:24:31.242Z,1538976271.242 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-10-08T05:24:31.242Z,1538976271.242 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 800
2018-10-08T05:24:31.243Z,1538976271.243 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-10-08T05:24:31.244Z,1538976271.244 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-10-08T05:24:31.244Z,1538976271.244 [logger ThreadHandler](INFO): Protected caller Thread ID is 801
2018-10-08T05:24:31.246Z,1538976271.246 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-10-08T05:24:31.247Z,1538976271.247 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-10-08T05:24:31.251Z,1538976271.251 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-10-08T05:24:31.641Z,1538976271.641 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-10-08T05:24:31.643Z,1538976271.643 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-10-08T05:24:31.879Z,1538976271.879 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-10-08T05:24:31.881Z,1538976271.881 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-10-08T05:24:32.224Z,1538976272.224 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-10-08T05:24:32.225Z,1538976272.225 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-10-08T05:24:32.377Z,1538976272.377 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-10-08T05:24:32.378Z,1538976272.378 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-10-08T05:24:32.481Z,1538976272.481 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-10-08T05:24:32.482Z,1538976272.482 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-10-08T05:24:33.015Z,1538976273.015 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-10-08T05:24:33.016Z,1538976273.016 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-10-08T05:24:33.542Z,1538976273.542 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-10-08T05:24:33.544Z,1538976273.544 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-10-08T05:24:34.073Z,1538976274.073 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-10-08T05:24:34.074Z,1538976274.074 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-10-08T05:24:34.185Z,1538976274.185 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-10-08T05:24:34.186Z,1538976274.186 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-10-08T05:24:34.289Z,1538976274.289 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-10-08T05:24:34.291Z,1538976274.291 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-10-08T05:24:34.520Z,1538976274.520 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-10-08T05:24:34.522Z,1538976274.522 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-10-08T05:24:34.748Z,1538976274.748 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-10-08T05:24:34.749Z,1538976274.749 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-10-08T05:24:35.460Z,1538976275.460 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-10-08T05:24:35.462Z,1538976275.462 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-10-08T05:24:35.614Z,1538976275.614 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-10-08T05:24:35.614Z,1538976275.614 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-10-08T05:24:35.701Z,1538976275.701 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2018-10-08T05:24:35.704Z,1538976275.704 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2018-10-08T05:24:35.815Z,1538976275.815 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2018-10-08T05:24:35.947Z,1538976275.947 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2018-10-08T05:24:36.049Z,1538976276.049 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2018-10-08T05:24:36.138Z,1538976276.138 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2018-10-08T05:24:36.316Z,1538976276.316 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2018-10-08T05:24:36.519Z,1538976276.519 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2018-10-08T05:24:36.597Z,1538976276.597 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2018-10-08T05:24:36.843Z,1538976276.843 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-10-08T05:24:36.843Z,1538976276.843 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2018-10-08T05:24:36.930Z,1538976276.930 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2018-10-08T05:24:37.026Z,1538976277.026 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2018-10-08T05:24:37.134Z,1538976277.134 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2018-10-08T05:24:37.274Z,1538976277.274 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2018-10-08T05:24:37.277Z,1538976277.277 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-10-08T05:24:37.568Z,1538976277.568 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-10-08T05:24:37.570Z,1538976277.570 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-10-08T05:24:37.628Z,1538976277.628 [DepthRateCalculator] Loaded
2018-10-08T05:24:37.629Z,1538976277.629 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-10-08T05:24:37.635Z,1538976277.635 [PitchRateCalculator] Loaded
2018-10-08T05:24:37.635Z,1538976277.635 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-10-08T05:24:37.652Z,1538976277.652 [SpeedCalculator] Loaded
2018-10-08T05:24:37.653Z,1538976277.653 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-10-08T05:24:37.675Z,1538976277.675 [TempGradientCalculator] Loaded
2018-10-08T05:24:37.675Z,1538976277.675 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-10-08T05:24:37.681Z,1538976277.681 [YawRateCalculator] Loaded
2018-10-08T05:24:37.682Z,1538976277.682 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-10-08T05:24:37.723Z,1538976277.723 [ElevatorOffsetCalculator] Loaded
2018-10-08T05:24:37.723Z,1538976277.723 [ComponentRegistry](DEBUG): SyncComponent "ElevatorOffsetCalculator" handled in the control thread.
2018-10-08T05:24:37.724Z,1538976277.724 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-10-08T05:24:37.724Z,1538976277.724 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-10-08T05:24:37.828Z,1538976277.828 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-10-08T05:24:37.830Z,1538976277.830 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-10-08T05:24:37.971Z,1538976277.971 [BuoyancyServo] Loaded
2018-10-08T05:24:37.971Z,1538976277.971 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-10-08T05:24:37.987Z,1538976277.987 [ElevatorServo] Loaded
2018-10-08T05:24:37.987Z,1538976277.987 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-10-08T05:24:38.002Z,1538976278.002 [MassServo] Loaded
2018-10-08T05:24:38.002Z,1538976278.002 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-10-08T05:24:38.018Z,1538976278.018 [RudderServo] Loaded
2018-10-08T05:24:38.019Z,1538976278.019 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-10-08T05:24:38.034Z,1538976278.034 [ThrusterServo] Loaded
2018-10-08T05:24:38.034Z,1538976278.034 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-10-08T05:24:38.035Z,1538976278.035 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-10-08T05:24:38.036Z,1538976278.036 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-10-08T05:24:38.061Z,1538976278.061 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-10-08T05:24:38.061Z,1538976278.061 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-10-08T05:24:38.191Z,1538976278.191 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-10-08T05:24:38.192Z,1538976278.192 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-10-08T05:24:38.771Z,1538976278.771 [DataOverHttps] Loaded
2018-10-08T05:24:38.771Z,1538976278.771 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-10-08T05:24:38.785Z,1538976278.785 [Depth_Keller] Loaded
2018-10-08T05:24:38.785Z,1538976278.785 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-10-08T05:24:38.790Z,1538976278.790 [DropWeight] Loaded
2018-10-08T05:24:38.790Z,1538976278.790 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-10-08T05:24:38.892Z,1538976278.892 [NAL9602] Loaded
2018-10-08T05:24:38.893Z,1538976278.893 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-10-08T05:24:38.909Z,1538976278.909 [Onboard] Loaded
2018-10-08T05:24:38.909Z,1538976278.909 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-10-08T05:24:38.920Z,1538976278.920 [Radio_Surface] Loaded
2018-10-08T05:24:38.920Z,1538976278.920 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-10-08T05:24:38.922Z,1538976278.922 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 4088F4E0
2018-10-08T05:24:38.922Z,1538976278.922 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 883
2018-10-08T05:24:39.078Z,1538976279.078 [PNI_TCM] Loaded
2018-10-08T05:24:39.078Z,1538976279.078 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-10-08T05:24:39.141Z,1538976279.141 [Rowe_600LCM] Loaded
2018-10-08T05:24:39.141Z,1538976279.141 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2018-10-08T05:24:39.142Z,1538976279.142 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 408BF4E0
2018-10-08T05:24:39.143Z,1538976279.143 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 884
2018-10-08T05:24:40.966Z,1538976280.966 [BPC1] Loaded
2018-10-08T05:24:40.966Z,1538976280.966 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-10-08T05:24:40.966Z,1538976280.966 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-10-08T05:24:40.967Z,1538976280.967 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-10-08T05:24:41.459Z,1538976281.459 [SBIT](DEBUG): Construct Startup Built In Test.
2018-10-08T05:24:41.482Z,1538976281.482 [SBIT] Loaded
2018-10-08T05:24:41.482Z,1538976281.482 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-10-08T05:24:41.483Z,1538976281.483 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-10-08T05:24:41.495Z,1538976281.495 [IBIT] Loaded
2018-10-08T05:24:41.495Z,1538976281.495 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-10-08T05:24:41.498Z,1538976281.498 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-10-08T05:24:41.652Z,1538976281.652 [CBIT] Loaded
2018-10-08T05:24:41.653Z,1538976281.653 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-10-08T05:24:41.653Z,1538976281.653 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-10-08T05:24:41.654Z,1538976281.654 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-10-08T05:24:41.865Z,1538976281.865 [Aanderaa_O2] Loaded
2018-10-08T05:24:41.865Z,1538976281.865 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-10-08T05:24:41.945Z,1538976281.945 [CTD_NeilBrown] Loaded
2018-10-08T05:24:41.946Z,1538976281.946 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2018-10-08T05:24:41.947Z,1538976281.947 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 409894E0
2018-10-08T05:24:41.947Z,1538976281.947 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 885
2018-10-08T05:24:42.000Z,1538976282.000 [CTD_Seabird] Loaded
2018-10-08T05:24:42.000Z,1538976282.000 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-10-08T05:24:42.001Z,1538976282.001 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 409B94E0
2018-10-08T05:24:42.002Z,1538976282.002 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 886
2018-10-08T05:24:42.017Z,1538976282.017 [PAR_Licor] Loaded
2018-10-08T05:24:42.017Z,1538976282.017 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-10-08T05:24:42.113Z,1538976282.113 [WetLabsBB2FL] Loaded
2018-10-08T05:24:42.113Z,1538976282.113 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-10-08T05:24:42.114Z,1538976282.114 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 409E94E0
2018-10-08T05:24:42.115Z,1538976282.115 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 888
2018-10-08T05:24:42.115Z,1538976282.115 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-10-08T05:24:42.117Z,1538976282.117 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-10-08T05:24:42.208Z,1538976282.208 [VerticalControl](DEBUG): Construct VerticalControl.
2018-10-08T05:24:42.296Z,1538976282.296 [VerticalControl] Loaded
2018-10-08T05:24:42.296Z,1538976282.296 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-10-08T05:24:42.297Z,1538976282.297 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-10-08T05:24:42.357Z,1538976282.357 [HorizontalControl] Loaded
2018-10-08T05:24:42.357Z,1538976282.357 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-10-08T05:24:42.358Z,1538976282.358 [SpeedControl](DEBUG): Construct SpeedControl.
2018-10-08T05:24:42.359Z,1538976282.359 [SpeedControl] Loaded
2018-10-08T05:24:42.360Z,1538976282.360 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-10-08T05:24:42.360Z,1538976282.360 [LoopControl](DEBUG): Construct LoopControl.
2018-10-08T05:24:42.361Z,1538976282.361 [LoopControl] Loaded
2018-10-08T05:24:42.361Z,1538976282.361 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-10-08T05:24:42.362Z,1538976282.362 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-10-08T05:24:42.363Z,1538976282.363 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-10-08T05:24:42.401Z,1538976282.401 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-10-08T05:24:42.403Z,1538976282.403 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-10-08T05:24:42.513Z,1538976282.513 [DeadReckonUsingSpeedCalculator] Loaded
2018-10-08T05:24:42.513Z,1538976282.513 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-10-08T05:24:42.530Z,1538976282.530 [NavChart] Loaded
2018-10-08T05:24:42.530Z,1538976282.530 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-10-08T05:24:42.534Z,1538976282.534 [UniversalFixResidualReporter] Loaded
2018-10-08T05:24:42.535Z,1538976282.535 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-10-08T05:24:42.535Z,1538976282.535 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-10-08T05:24:42.539Z,1538976282.539 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-10-08T05:24:42.540Z,1538976282.540 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-10-08T05:24:42.547Z,1538976282.547 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-10-08T05:24:42.548Z,1538976282.548 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A754E0
2018-10-08T05:24:42.548Z,1538976282.548 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 889
2018-10-08T05:24:42.553Z,1538976282.553 [Supervisor](INFO): Main Thread ID is 797
2018-10-08T05:24:42.553Z,1538976282.553 [Supervisor](DEBUG): Running supervisor.
2018-10-08T05:24:42.554Z,1538976282.554 [CommandLine ThreadHandler](INFO): Handler Thread ID is 890
2018-10-08T05:24:42.556Z,1538976282.556 [controlThread ThreadHandler](INFO): Handler Thread ID is 891
2018-10-08T05:24:42.557Z,1538976282.557 [controlThread](DEBUG): Initializing ControlThread
2018-10-08T05:24:42.558Z,1538976282.558 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-10-08T05:24:42.558Z,1538976282.558 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-10-08T05:24:42.558Z,1538976282.558 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-10-08T05:24:42.559Z,1538976282.559 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-10-08T05:24:42.559Z,1538976282.559 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-10-08T05:24:42.560Z,1538976282.560 [ElevatorOffsetCalculator](DEBUG): Initializing ElevatorOffsetCalculator.
2018-10-08T05:24:42.567Z,1538976282.567 [SBIT](INFO): Initialize SBIT Component.
2018-10-08T05:24:42.568Z,1538976282.568 [SBIT](IMPORTANT): git: 2018-09-26-8-g9d1ddeb
2018-10-08T05:24:42.568Z,1538976282.568 [SBIT](INFO): git hash: 9d1ddebeffd928834fca321453eef3ce89fa1d5a
2018-10-08T05:24:42.568Z,1538976282.568 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-10-08T05:24:42.569Z,1538976282.569 [SBIT](IMPORTANT): Kernel Version:#2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-10-08T05:24:42.570Z,1538976282.570 [SBIT](INFO): Beginning SBIT in 23.000000 seconds.
2018-10-08T05:24:42.571Z,1538976282.570 [IBIT](INFO): Initialize IBIT Component.
2018-10-08T05:24:42.571Z,1538976282.571 [CBIT](DEBUG): Initialize CBIT Component.
2018-10-08T05:24:42.572Z,1538976282.572 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2018-10-08T05:24:42.572Z,1538976282.572 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-10-08T05:24:42.573Z,1538976282.573 [logger ThreadHandler](INFO): Handler Thread ID is 892
2018-10-08T05:24:42.589Z,1538976282.589 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 893
2018-10-08T05:24:42.595Z,1538976282.595 [Radio_Surface](INFO): Powering up
2018-10-08T05:24:42.601Z,1538976282.601 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 894
2018-10-08T05:24:42.602Z,1538976282.602 [Rowe_600LCM](INFO): Initializing
2018-10-08T05:24:42.602Z,1538976282.602 [Rowe_600LCM](INFO): Checking LCM
2018-10-08T05:24:42.681Z,1538976282.681 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-10-08T05:24:42.683Z,1538976282.683 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-10-08T05:24:42.684Z,1538976282.684 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-10-08T05:24:42.684Z,1538976282.684 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-10-08T05:24:42.685Z,1538976282.685 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:24:42.686Z,1538976282.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:24:42.686Z,1538976282.686 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:24:42.686Z,1538976282.686 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-10-08T05:24:42.687Z,1538976282.687 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-10-08T05:24:42.714Z,1538976282.714 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-10-08T05:24:42.724Z,1538976282.724 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 895
2018-10-08T05:24:42.727Z,1538976282.727 [CTD_NeilBrown](INFO): Powering down
2018-10-08T05:24:42.854Z,1538976282.854 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 896
2018-10-08T05:24:42.861Z,1538976282.861 [CTD_Seabird](INFO): Initializing
2018-10-08T05:24:42.862Z,1538976282.862 [CTD_Seabird](INFO): Checking LCM
2018-10-08T05:24:42.866Z,1538976282.866 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-10-08T05:24:42.953Z,1538976282.953 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 897
2018-10-08T05:24:42.954Z,1538976282.954 [WetLabsBB2FL](INFO): Powering down
2018-10-08T05:24:42.973Z,1538976282.973 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-10-08T05:24:42.974Z,1538976282.974 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-10-08T05:24:43.045Z,1538976283.045 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 898
2018-10-08T05:24:43.061Z,1538976283.061 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-10-08T05:24:43.062Z,1538976283.062 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-10-08T05:24:43.062Z,1538976283.062 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-10-08T05:24:43.062Z,1538976283.062 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-10-08T05:24:43.062Z,1538976283.062 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-10-08T05:24:43.062Z,1538976283.062 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-10-08T05:24:43.062Z,1538976283.062 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-10-08T05:24:43.063Z,1538976283.063 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-10-08T05:24:43.063Z,1538976283.063 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-10-08T05:24:43.063Z,1538976283.063 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-10-08T05:24:43.063Z,1538976283.063 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-10-08T05:24:43.063Z,1538976283.063 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-10-08T05:24:43.064Z,1538976283.064 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-10-08T05:24:43.064Z,1538976283.064 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-10-08T05:24:43.064Z,1538976283.064 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-10-08T05:24:43.064Z,1538976283.064 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-10-08T05:24:43.071Z,1538976283.071 [CTD_Seabird](INFO): LCM OK
2018-10-08T05:24:43.071Z,1538976283.071 [CTD_Seabird](INFO): Powering up
2018-10-08T05:24:43.071Z,1538976283.071 [Rowe_600LCM](INFO): LCM OK
2018-10-08T05:24:43.072Z,1538976283.072 [Rowe_600LCM](INFO): Powering up
2018-10-08T05:24:43.084Z,1538976283.084 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-10-08T05:24:43.097Z,1538976283.097 [Default:A.Wait](DEBUG): Construct Wait.
2018-10-08T05:24:43.099Z,1538976283.099 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-10-08T05:24:43.138Z,1538976283.138 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-10-08T05:24:43.141Z,1538976283.141 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-10-08T05:24:43.163Z,1538976283.163 [Default:E.Execute](DEBUG): Construct Execute.
2018-10-08T05:24:43.166Z,1538976283.166 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns="Tethys"
         xmlns:Units="Tethys/Units"
         xmlns:Guidance="Tethys/Guidance"
         xmlns:Universal="Tethys/Universal"
         xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                             Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                             Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                             Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
         Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Sequence/>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn on</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-10-08T05:24:43.185Z,1538976283.185 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,Aanderaa_O2,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,ElevatorOffsetCalculator,DeadReckonUsingSpeedCalculator,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-10-08T05:24:43.213Z,1538976283.213 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-10-08T05:24:43.222Z,1538976283.222 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2018-10-08T05:24:43.530Z,1538976283.530 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-10-08T05:24:43.599Z,1538976283.599 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-08T05:24:43.817Z,1538976283.817 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-10-08T05:24:43.825Z,1538976283.825 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-10-08T05:24:43.861Z,1538976283.861 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-10-08T05:24:43.869Z,1538976283.869 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-10-08T05:24:43.883Z,1538976283.883 [MassServo](DEBUG): Initializing EZServoServo.
2018-10-08T05:24:43.890Z,1538976283.890 [MassServo](DEBUG): Initializing MassServo.
2018-10-08T05:24:43.896Z,1538976283.896 [RudderServo](DEBUG): Initializing EZServoServo.
2018-10-08T05:24:43.897Z,1538976283.897 [RudderServo](DEBUG): Initializing RudderServo.
2018-10-08T05:24:43.927Z,1538976283.927 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-10-08T05:24:43.933Z,1538976283.933 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-10-08T05:24:44.211Z,1538976284.211 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T05:24:44.212Z,1538976284.212 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T05:24:44.212Z,1538976284.212 [DropWeight](ERROR): Hardware Fault
2018-10-08T05:24:44.294Z,1538976284.294 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-08T05:24:44.649Z,1538976284.649 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-10-08T05:24:44.649Z,1538976284.649 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-10-08T05:24:44.649Z,1538976284.649 [BuoyancyServo] Communications Fault, FailCount= 1
2018-10-08T05:24:44.649Z,1538976284.649 [BuoyancyServo](ERROR): Communications Fault
2018-10-08T05:24:44.982Z,1538976284.982 [CommandLine](FAULT): Scheduling is paused
2018-10-08T05:24:44.983Z,1538976284.983 [CBIT](INFO): Critical error at 20181008T052444
2018-10-08T05:24:44.983Z,1538976284.983 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-10-08T05:24:44.986Z,1538976284.986 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-10-08T05:24:44.986Z,1538976284.986 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T05:24:44.987Z,1538976284.987 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T05:24:45.046Z,1538976285.046 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-08T05:24:45.063Z,1538976285.063 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-10-08T05:24:45.063Z,1538976285.063 [BuoyancyServo](INFO): Powering down
2018-10-08T05:24:45.156Z,1538976285.156 [CBIT](INFO): Critical error at 20181008T052444
2018-10-08T05:24:45.437Z,1538976285.437 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-08T05:24:45.888Z,1538976285.888 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-08T05:24:46.260Z,1538976286.260 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-08T05:24:46.746Z,1538976286.746 [Aanderaa_O2](INFO): Powering down
2018-10-08T05:24:46.906Z,1538976286.906 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-08T05:24:47.058Z,1538976287.058 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-10-08T05:24:47.067Z,1538976287.067 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-10-08T05:24:47.210Z,1538976287.210 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-10-08T05:24:47.210Z,1538976287.210 [BuoyancyServo] No Fault, FailCount= 1
2018-10-08T05:24:47.240Z,1538976287.240 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 9600 >& /dev/null &
2018-10-08T05:24:47.375Z,1538976287.375 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-10-08T05:24:47.376Z,1538976287.376 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-10-08T05:24:47.377Z,1538976287.377 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-10-08T05:24:47.528Z,1538976287.528 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-10-08T05:24:47.528Z,1538976287.528 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-10-08T05:24:48.397Z,1538976288.397 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-10-08T05:24:48.899Z,1538976288.899 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-10-08T05:24:48.901Z,1538976288.901 [CTD_Seabird](INFO): LCM subscribed to channel:seabird_gpctd_t.seabird-gpctd
2018-10-08T05:24:49.886Z,1538976289.886 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-10-08T05:24:49.886Z,1538976289.886 [CTD_Seabird](INFO): Powering down
2018-10-08T05:25:06.202Z,1538976306.202 [SBIT](IMPORTANT): Beginning Startup BIT
2018-10-08T05:25:06.207Z,1538976306.207 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-08T05:25:09.081Z,1538976309.081 [NAL9602](INFO): Powering up NAL9602
2018-10-08T05:25:17.193Z,1538976317.193 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.003604
CHAN A1 (24V): -0.007968
CHAN A2 (12V): -0.002282
CHAN A3 (5V): -0.001586
CHAN B0 (3.3V): -0.000230
CHAN B1 (3.15aV): -0.000225
CHAN B2 (3.15bV): 0.000163
CHAN B3 (GND): 0.000138
OPEN: -0.000544
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-08T05:25:20.281Z,1538976320.281 [NAL9602](INFO): NAL9602 initialized
2018-10-08T05:25:59.645Z,1538976359.645 [SBIT](IMPORTANT): SBIT PASSED
2018-10-08T05:25:59.726Z,1538976359.726 [CommandLine](IMPORTANT): got command configSet list
2018-10-08T05:25:59.726Z,1538976359.726 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-10-08T05:25:59.730Z,1538976359.730 [CommandLine](IMPORTANT): BPC1.batteryMuxCycleTime=10 minute;

2018-10-08T05:25:59.730Z,1538976359.730 [CommandLine](IMPORTANT): BPC1.batterySamplingInterval=1 minute;

2018-10-08T05:25:59.730Z,1538976359.730 [CommandLine](IMPORTANT): DAT.loadAtStartup=0 bool;

2018-10-08T05:25:59.730Z,1538976359.730 [CommandLine](IMPORTANT): ESPComponent.loadAtStartup=1 bool;

2018-10-08T05:25:59.730Z,1538976359.730 [CommandLine](IMPORTANT): ESPComponent.sampleTimeout=10 minute;

2018-10-08T05:25:59.730Z,1538976359.730 [CommandLine](IMPORTANT): ESPComponent.simulateHardware=1 bool;

2018-10-08T05:25:59.730Z,1538976359.730 [CommandLine](IMPORTANT): ElevatorServo.loadAtStartup=0 bool;

2018-10-08T05:25:59.731Z,1538976359.731 [CommandLine](IMPORTANT): Express none CTD_NeilBrown.bin_mean_sea_water_salinity;

2018-10-08T05:25:59.731Z,1538976359.731 [CommandLine](IMPORTANT): Express none CTD_NeilBrown.bin_mean_sea_water_temperature;

2018-10-08T05:25:59.731Z,1538976359.731 [CommandLine](IMPORTANT): Express none CTD_NeilBrown.bin_median_sea_water_temperature;

2018-10-08T05:25:59.731Z,1538976359.731 [CommandLine](IMPORTANT): Express none CTD_Seabird.bin_median_sea_water_salinity;

2018-10-08T05:25:59.731Z,1538976359.731 [CommandLine](IMPORTANT): Express none Rowe_600LCM.height_above_sea_floor;

2018-10-08T05:25:59.731Z,1538976359.731 [CommandLine](IMPORTANT): Express none VerticalTemperatureHomogeneityIndexCalculator.vertical_temperature_homogeneity_index;

2018-10-08T05:25:59.731Z,1538976359.731 [CommandLine](IMPORTANT): Express linearApproximation height_above_sea_floor 5.000000 meter;

2018-10-08T05:25:59.731Z,1538976359.731 [CommandLine](IMPORTANT): MassServo.loadAtStartup=0 bool;

2018-10-08T05:25:59.732Z,1538976359.732 [CommandLine](IMPORTANT): Rowe_600LCM.loadAtStartup=0 bool;

2018-10-08T05:25:59.732Z,1538976359.732 [CommandLine](IMPORTANT): RudderServo.loadAtStartup=0 bool;

2018-10-08T05:25:59.732Z,1538976359.732 [CommandLine](IMPORTANT): StratificationFrontDetector.loadAtStartup=0 bool;

2018-10-08T05:25:59.732Z,1538976359.732 [CommandLine](IMPORTANT): ThrusterServo.loadAtStartup=0 bool;

2018-10-08T05:25:59.732Z,1538976359.732 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral=497.852 cubic_centimeter;

2018-10-08T05:25:59.732Z,1538976359.732 [CommandLine](IMPORTANT): VerticalControl.massDefault=-35 millimeter;

2018-10-08T05:26:00.004Z,1538976360.004 [MissionManager](IMPORTANT): Started mission Startup
2018-10-08T05:26:00.005Z,1538976360.005 [Startup] Running Loop=1
2018-10-08T05:26:00.005Z,1538976360.005 [Startup](DEBUG): Aggregate::initialize Startup
2018-10-08T05:26:00.005Z,1538976360.005 [Startup:A.GoToSurface] Running Loop=1
2018-10-08T05:26:00.005Z,1538976360.005 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-10-08T05:26:00.006Z,1538976360.006 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-10-08T05:26:00.006Z,1538976360.006 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-10-08T05:26:00.007Z,1538976360.007 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-10-08T05:26:00.007Z,1538976360.007 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-10-08T05:26:00.008Z,1538976360.008 [Startup:A.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-10-08T05:26:00.023Z,1538976360.023 [Startup:StartupSatComms] Running Loop=1
2018-10-08T05:26:00.023Z,1538976360.023 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-10-08T05:26:00.023Z,1538976360.023 [Startup:StartupSatComms:A] Running Loop=1
2018-10-08T05:26:00.433Z,1538976360.433 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-10-08T05:26:30.014Z,1538976390.014 [BPC1](FAULT): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T05:26:30.015Z,1538976390.015 [BPC1](FAULT): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.016Z,1538976390.016 [BPC1](FAULT): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T05:26:30.025Z,1538976390.025 [BPC1](FAULT): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T05:26:30.026Z,1538976390.026 [BPC1](FAULT): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T05:26:30.027Z,1538976390.027 [BPC1](FAULT): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.028Z,1538976390.028 [BPC1](FAULT): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.029Z,1538976390.029 [BPC1](FAULT): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.030Z,1538976390.030 [BPC1](FAULT): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.031Z,1538976390.031 [BPC1](FAULT): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.031Z,1538976390.031 [BPC1](FAULT): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.032Z,1538976390.032 [BPC1](FAULT): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.038Z,1538976390.038 [BPC1](FAULT): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T05:26:30.038Z,1538976390.038 [BPC1](FAULT): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T05:26:30.039Z,1538976390.039 [BPC1](FAULT): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T05:26:30.040Z,1538976390.040 [BPC1](FAULT): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.052Z,1538976390.052 [BPC1](FAULT): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T05:26:30.053Z,1538976390.053 [BPC1](FAULT): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T05:26:30.054Z,1538976390.054 [BPC1](FAULT): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T05:26:30.055Z,1538976390.055 [BPC1](FAULT): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.055Z,1538976390.055 [BPC1](FAULT): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T05:26:30.056Z,1538976390.056 [BPC1](FAULT): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T05:26:30.057Z,1538976390.057 [BPC1](INFO): Calculating totals. Valid battery stick count: 36. Valid reserve battery stick count: 4.
2018-10-08T05:27:00.436Z,1538976420.436 [Startup:StartupSatComms:A](INFO): Timed out from 2018-10-08T05:26:00.0Z
2018-10-08T05:27:00.436Z,1538976420.436 [Startup:StartupSatComms:A] Stopped
2018-10-08T05:27:00.436Z,1538976420.436 [Startup:StartupSatComms:B] Running Loop=1
2018-10-08T05:27:00.822Z,1538976420.822 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-10-08T05:27:08.388Z,1538976428.388 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.004484
2018-10-08T05:27:15.350Z,1538976435.350 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T050058/Courier0007.lzma
2018-10-08T05:27:16.136Z,1538976436.136 [DataOverHttps](INFO): Moved sent file to Logs/20181008T050058/Courier0007.lzma.bak
2018-10-08T05:27:16.136Z,1538976436.136 [DataOverHttps](INFO): SBD MOMSN=8613514
2018-10-08T05:27:26.516Z,1538976446.516 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20181008T051540/Courier0000.lzma
2018-10-08T05:27:27.312Z,1538976447.312 [DataOverHttps](INFO): Moved sent file to Logs/20181008T051540/Courier0000.lzma.bak
2018-10-08T05:27:27.312Z,1538976447.312 [DataOverHttps](INFO): SBD MOMSN=8613516
2018-10-08T05:27:36.868Z,1538976456.868 [DataOverHttps](INFO): Sending 285 bytes from file Logs/20181008T052431/Courier0000.lzma
2018-10-08T05:27:37.659Z,1538976457.659 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0000.lzma.bak
2018-10-08T05:27:37.660Z,1538976457.660 [DataOverHttps](INFO): SBD MOMSN=8613519
2018-10-08T05:27:42.692Z,1538976462.692 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:27:42.692Z,1538976462.692 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T05:27:42.692Z,1538976462.692 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:27:42.746Z,1538976462.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:27:43.094Z,1538976463.094 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:27:43.094Z,1538976463.094 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T05:27:43.452Z,1538976463.452 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:27:43.458Z,1538976463.458 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:27:43.459Z,1538976463.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:27:47.576Z,1538976467.576 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20181008T050058/Express0008.lzma
2018-10-08T05:27:48.324Z,1538976468.324 [DataOverHttps](INFO): Moved sent file to Logs/20181008T050058/Express0008.lzma.bak
2018-10-08T05:27:48.324Z,1538976468.324 [DataOverHttps](INFO): SBD MOMSN=8613522
2018-10-08T05:28:03.588Z,1538976483.588 [Startup:StartupSatComms:B](INFO): Timed out from 2018-10-08T05:27:00.4Z
2018-10-08T05:28:03.588Z,1538976483.588 [Startup:StartupSatComms:B] Stopped
2018-10-08T05:28:03.613Z,1538976483.613 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-10-08T05:28:03.614Z,1538976483.614 [Startup:StartupSatComms] Stopped
2018-10-08T05:28:03.614Z,1538976483.614 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-10-08T05:28:03.615Z,1538976483.615 [Startup](INFO): Completed Startup
2018-10-08T05:28:03.615Z,1538976483.615 [MissionManager](INFO): Startup is completed.
2018-10-08T05:28:03.615Z,1538976483.615 [MissionManager](INFO): Uninitializing Mission Startup
2018-10-08T05:28:03.615Z,1538976483.615 [Startup] Stopped
2018-10-08T05:28:03.615Z,1538976483.615 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-10-08T05:28:03.615Z,1538976483.615 [Startup:A.GoToSurface] Stopped
2018-10-08T05:28:03.615Z,1538976483.615 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-10-08T05:28:03.755Z,1538976483.755 [DataOverHttps](INFO): Sending 1228 bytes from file Logs/20181008T051540/Express0001.lzma
2018-10-08T05:28:03.889Z,1538976483.889 [MissionManager](IMPORTANT): Started mission Default
2018-10-08T05:28:03.890Z,1538976483.890 [Default] Running Loop=1
2018-10-08T05:28:03.890Z,1538976483.890 [Default](DEBUG): Aggregate::initialize Default
2018-10-08T05:28:03.890Z,1538976483.890 [Default:B.GoToSurface] Running Loop=1
2018-10-08T05:28:03.890Z,1538976483.890 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-10-08T05:28:03.890Z,1538976483.890 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-10-08T05:28:03.891Z,1538976483.891 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-10-08T05:28:03.891Z,1538976483.891 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-10-08T05:28:03.891Z,1538976483.891 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-10-08T05:28:03.892Z,1538976483.892 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-10-08T05:28:03.892Z,1538976483.892 [Default:A.Wait] Running Loop=1
2018-10-08T05:28:03.892Z,1538976483.892 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-10-08T05:28:04.479Z,1538976484.479 [DataOverHttps](INFO): Moved sent file to Logs/20181008T051540/Express0001.lzma.bak
2018-10-08T05:28:04.480Z,1538976484.480 [DataOverHttps](INFO): SBD MOMSN=8613524
2018-10-08T05:28:11.558Z,1538976491.558 [CommandLine](IMPORTANT): got command show variable BPC1
2018-10-08T05:28:11.585Z,1538976491.585 [CommandLine](IMPORTANT): BPC1.loadAtStartup (bool)
2018-10-08T05:28:11.585Z,1538976491.585 [CommandLine](IMPORTANT): BPC1.simulateHardware (bool)
2018-10-08T05:28:11.586Z,1538976491.586 [CommandLine](IMPORTANT): BPC1.batteryMissingStickThreshold (count)
2018-10-08T05:28:11.586Z,1538976491.586 [CommandLine](IMPORTANT): BPC1.batteryMuxCycleTime (minute)
2018-10-08T05:28:11.586Z,1538976491.586 [CommandLine](IMPORTANT): BPC1.batterySamplingInterval (hour)
2018-10-08T05:28:11.587Z,1538976491.587 [CommandLine](IMPORTANT): BPC1.batteryStickCommsTimeout (hour)
2018-10-08T05:28:11.608Z,1538976491.608 [CommandLine](IMPORTANT): BPC1A.uart (none)
2018-10-08T05:28:11.608Z,1538976491.608 [CommandLine](IMPORTANT): BPC1A.baud (bit_per_second)
2018-10-08T05:28:11.666Z,1538976491.666 [CommandLine](IMPORTANT): BPC1B.uart (none)
2018-10-08T05:28:11.666Z,1538976491.666 [CommandLine](IMPORTANT): BPC1B.baud (bit_per_second)
2018-10-08T05:28:11.763Z,1538976491.763 [CommandLine](IMPORTANT): BPC1.reserve_battery_charge (ampere_hour)
2018-10-08T05:28:11.763Z,1538976491.763 [CommandLine](IMPORTANT): BPC1.reserve_battery_voltage (volt)
2018-10-08T05:28:11.764Z,1538976491.764 [CommandLine](IMPORTANT): BPC1.platform_battery_charge (ampere_hour)
2018-10-08T05:28:11.764Z,1538976491.764 [CommandLine](IMPORTANT): BPC1.platform_battery_voltage (volt)
2018-10-08T05:28:11.805Z,1538976491.805 [CommandLine](IMPORTANT): BPC1.BattCapacity_1 (ampere_hour)
2018-10-08T05:28:11.805Z,1538976491.805 [CommandLine](IMPORTANT): BPC1.BattCurrent_1 (ampere)
2018-10-08T05:28:11.806Z,1538976491.806 [CommandLine](IMPORTANT): BPC1.BattSerial_1 (count)
2018-10-08T05:28:11.806Z,1538976491.806 [CommandLine](IMPORTANT): BPC1.BattStatus_1 (none)
2018-10-08T05:28:11.806Z,1538976491.806 [CommandLine](IMPORTANT): BPC1.BattTemp_1 (celsius)
2018-10-08T05:28:11.807Z,1538976491.807 [CommandLine](IMPORTANT): BPC1.BattVoltage_1 (millivolt)
2018-10-08T05:28:11.807Z,1538976491.807 [CommandLine](IMPORTANT): BPC1.BattCapacity_2 (ampere_hour)
2018-10-08T05:28:11.807Z,1538976491.807 [CommandLine](IMPORTANT): BPC1.BattCurrent_2 (ampere)
2018-10-08T05:28:11.808Z,1538976491.808 [CommandLine](IMPORTANT): BPC1.BattSerial_2 (count)
2018-10-08T05:28:11.808Z,1538976491.808 [CommandLine](IMPORTANT): BPC1.BattStatus_2 (none)
2018-10-08T05:28:11.809Z,1538976491.809 [CommandLine](IMPORTANT): BPC1.BattTemp_2 (celsius)
2018-10-08T05:28:11.809Z,1538976491.809 [CommandLine](IMPORTANT): BPC1.BattVoltage_2 (millivolt)
2018-10-08T05:28:11.809Z,1538976491.809 [CommandLine](IMPORTANT): BPC1.BattCapacity_3 (ampere_hour)
2018-10-08T05:28:11.810Z,1538976491.810 [CommandLine](IMPORTANT): BPC1.BattCurrent_3 (ampere)
2018-10-08T05:28:11.810Z,1538976491.810 [CommandLine](IMPORTANT): BPC1.BattSerial_3 (count)
2018-10-08T05:28:11.811Z,1538976491.811 [CommandLine](IMPORTANT): BPC1.BattStatus_3 (none)
2018-10-08T05:28:11.811Z,1538976491.811 [CommandLine](IMPORTANT): BPC1.BattTemp_3 (celsius)
2018-10-08T05:28:11.811Z,1538976491.811 [CommandLine](IMPORTANT): BPC1.BattVoltage_3 (millivolt)
2018-10-08T05:28:11.812Z,1538976491.812 [CommandLine](IMPORTANT): BPC1.BattCapacity_4 (ampere_hour)
2018-10-08T05:28:11.812Z,1538976491.812 [CommandLine](IMPORTANT): BPC1.BattCurrent_4 (ampere)
2018-10-08T05:28:11.846Z,1538976491.846 [CommandLine](IMPORTANT): BPC1.BattSerial_4 (count)
2018-10-08T05:28:11.847Z,1538976491.847 [CommandLine](IMPORTANT): BPC1.BattStatus_4 (none)
2018-10-08T05:28:11.847Z,1538976491.847 [CommandLine](IMPORTANT): BPC1.BattTemp_4 (celsius)
2018-10-08T05:28:11.847Z,1538976491.847 [CommandLine](IMPORTANT): BPC1.BattVoltage_4 (millivolt)
2018-10-08T05:28:11.848Z,1538976491.848 [CommandLine](IMPORTANT): BPC1.BattCapacity_5 (ampere_hour)
2018-10-08T05:28:11.848Z,1538976491.848 [CommandLine](IMPORTANT): BPC1.BattCurrent_5 (ampere)
2018-10-08T05:28:11.849Z,1538976491.849 [CommandLine](IMPORTANT): BPC1.BattSerial_5 (count)
2018-10-08T05:28:11.849Z,1538976491.849 [CommandLine](IMPORTANT): BPC1.BattStatus_5 (none)
2018-10-08T05:28:11.849Z,1538976491.849 [CommandLine](IMPORTANT): BPC1.BattTemp_5 (celsius)
2018-10-08T05:28:11.850Z,1538976491.850 [CommandLine](IMPORTANT): BPC1.BattVoltage_5 (millivolt)
2018-10-08T05:28:11.850Z,1538976491.850 [CommandLine](IMPORTANT): BPC1.BattCapacity_6 (ampere_hour)
2018-10-08T05:28:11.851Z,1538976491.851 [CommandLine](IMPORTANT): BPC1.BattCurrent_6 (ampere)
2018-10-08T05:28:11.851Z,1538976491.851 [CommandLine](IMPORTANT): BPC1.BattSerial_6 (count)
2018-10-08T05:28:11.851Z,1538976491.851 [CommandLine](IMPORTANT): BPC1.BattStatus_6 (none)
2018-10-08T05:28:11.852Z,1538976491.852 [CommandLine](IMPORTANT): BPC1.BattTemp_6 (celsius)
2018-10-08T05:28:11.852Z,1538976491.852 [CommandLine](IMPORTANT): BPC1.BattVoltage_6 (millivolt)
2018-10-08T05:28:11.881Z,1538976491.881 [CommandLine](IMPORTANT): BPC1.BattCapacity_7 (ampere_hour)
2018-10-08T05:28:11.881Z,1538976491.881 [CommandLine](IMPORTANT): BPC1.BattCurrent_7 (ampere)
2018-10-08T05:28:11.882Z,1538976491.882 [CommandLine](IMPORTANT): BPC1.BattSerial_7 (count)
2018-10-08T05:28:11.882Z,1538976491.882 [CommandLine](IMPORTANT): BPC1.BattStatus_7 (none)
2018-10-08T05:28:11.882Z,1538976491.882 [CommandLine](IMPORTANT): BPC1.BattTemp_7 (celsius)
2018-10-08T05:28:11.883Z,1538976491.883 [CommandLine](IMPORTANT): BPC1.BattVoltage_7 (millivolt)
2018-10-08T05:28:11.883Z,1538976491.883 [CommandLine](IMPORTANT): BPC1.BattCapacity_8 (ampere_hour)
2018-10-08T05:28:11.883Z,1538976491.883 [CommandLine](IMPORTANT): BPC1.BattCurrent_8 (ampere)
2018-10-08T05:28:11.884Z,1538976491.884 [CommandLine](IMPORTANT): BPC1.BattSerial_8 (count)
2018-10-08T05:28:11.884Z,1538976491.884 [CommandLine](IMPORTANT): BPC1.BattStatus_8 (none)
2018-10-08T05:28:11.885Z,1538976491.885 [CommandLine](IMPORTANT): BPC1.BattTemp_8 (celsius)
2018-10-08T05:28:11.885Z,1538976491.885 [CommandLine](IMPORTANT): BPC1.BattVoltage_8 (millivolt)
2018-10-08T05:28:11.885Z,1538976491.885 [CommandLine](IMPORTANT): BPC1.BattCapacity_9 (ampere_hour)
2018-10-08T05:28:11.886Z,1538976491.886 [CommandLine](IMPORTANT): BPC1.BattCurrent_9 (ampere)
2018-10-08T05:28:11.886Z,1538976491.886 [CommandLine](IMPORTANT): BPC1.BattSerial_9 (count)
2018-10-08T05:28:11.887Z,1538976491.887 [CommandLine](IMPORTANT): BPC1.BattStatus_9 (none)
2018-10-08T05:28:11.887Z,1538976491.887 [CommandLine](IMPORTANT): BPC1.BattTemp_9 (celsius)
2018-10-08T05:28:11.887Z,1538976491.887 [CommandLine](IMPORTANT): BPC1.BattVoltage_9 (millivolt)
2018-10-08T05:28:11.888Z,1538976491.888 [CommandLine](IMPORTANT): BPC1.BattCapacity_10 (ampere_hour)
2018-10-08T05:28:11.888Z,1538976491.888 [CommandLine](IMPORTANT): BPC1.BattCurrent_10 (ampere)
2018-10-08T05:28:11.933Z,1538976491.933 [CommandLine](IMPORTANT): BPC1.BattSerial_10 (count)
2018-10-08T05:28:11.933Z,1538976491.933 [CommandLine](IMPORTANT): BPC1.BattStatus_10 (none)
2018-10-08T05:28:11.934Z,1538976491.934 [CommandLine](IMPORTANT): BPC1.BattTemp_10 (celsius)
2018-10-08T05:28:11.934Z,1538976491.934 [CommandLine](IMPORTANT): BPC1.BattVoltage_10 (millivolt)
2018-10-08T05:28:11.934Z,1538976491.934 [CommandLine](IMPORTANT): BPC1.BattCapacity_11 (ampere_hour)
2018-10-08T05:28:11.935Z,1538976491.935 [CommandLine](IMPORTANT): BPC1.BattCurrent_11 (ampere)
2018-10-08T05:28:11.935Z,1538976491.935 [CommandLine](IMPORTANT): BPC1.BattSerial_11 (count)
2018-10-08T05:28:11.935Z,1538976491.935 [CommandLine](IMPORTANT): BPC1.BattStatus_11 (none)
2018-10-08T05:28:11.936Z,1538976491.936 [CommandLine](IMPORTANT): BPC1.BattTemp_11 (celsius)
2018-10-08T05:28:11.936Z,1538976491.936 [CommandLine](IMPORTANT): BPC1.BattVoltage_11 (millivolt)
2018-10-08T05:28:11.937Z,1538976491.937 [CommandLine](IMPORTANT): BPC1.BattCapacity_12 (ampere_hour)
2018-10-08T05:28:11.937Z,1538976491.937 [CommandLine](IMPORTANT): BPC1.BattCurrent_12 (ampere)
2018-10-08T05:28:11.937Z,1538976491.937 [CommandLine](IMPORTANT): BPC1.BattSerial_12 (count)
2018-10-08T05:28:11.938Z,1538976491.938 [CommandLine](IMPORTANT): BPC1.BattStatus_12 (none)
2018-10-08T05:28:11.938Z,1538976491.938 [CommandLine](IMPORTANT): BPC1.BattTemp_12 (celsius)
2018-10-08T05:28:11.939Z,1538976491.939 [CommandLine](IMPORTANT): BPC1.BattVoltage_12 (millivolt)
2018-10-08T05:28:11.939Z,1538976491.939 [CommandLine](IMPORTANT): BPC1.BattCapacity_13 (ampere_hour)
2018-10-08T05:28:11.939Z,1538976491.939 [CommandLine](IMPORTANT): BPC1.BattCurrent_13 (ampere)
2018-10-08T05:28:11.940Z,1538976491.940 [CommandLine](IMPORTANT): BPC1.BattSerial_13 (count)
2018-10-08T05:28:11.940Z,1538976491.940 [CommandLine](IMPORTANT): BPC1.BattStatus_13 (none)
2018-10-08T05:28:11.998Z,1538976491.998 [CommandLine](IMPORTANT): BPC1.BattTemp_13 (celsius)
2018-10-08T05:28:11.999Z,1538976491.999 [CommandLine](IMPORTANT): BPC1.BattVoltage_13 (millivolt)
2018-10-08T05:28:11.999Z,1538976491.999 [CommandLine](IMPORTANT): BPC1.BattCapacity_14 (ampere_hour)
2018-10-08T05:28:11.000Z,1538976492.000 [CommandLine](IMPORTANT): BPC1.BattCurrent_14 (ampere)
2018-10-08T05:28:11.000Z,1538976492.000 [CommandLine](IMPORTANT): BPC1.BattSerial_14 (count)
2018-10-08T05:28:12.000Z,1538976492.000 [CommandLine](IMPORTANT): BPC1.BattStatus_14 (none)
2018-10-08T05:28:12.001Z,1538976492.001 [CommandLine](IMPORTANT): BPC1.BattTemp_14 (celsius)
2018-10-08T05:28:12.001Z,1538976492.001 [CommandLine](IMPORTANT): BPC1.BattVoltage_14 (millivolt)
2018-10-08T05:28:12.002Z,1538976492.002 [CommandLine](IMPORTANT): BPC1.BattCapacity_15 (ampere_hour)
2018-10-08T05:28:12.002Z,1538976492.002 [CommandLine](IMPORTANT): BPC1.BattCurrent_15 (ampere)
2018-10-08T05:28:12.002Z,1538976492.002 [CommandLine](IMPORTANT): BPC1.BattSerial_15 (count)
2018-10-08T05:28:12.003Z,1538976492.003 [CommandLine](IMPORTANT): BPC1.BattStatus_15 (none)
2018-10-08T05:28:12.003Z,1538976492.003 [CommandLine](IMPORTANT): BPC1.BattTemp_15 (celsius)
2018-10-08T05:28:12.003Z,1538976492.003 [CommandLine](IMPORTANT): BPC1.BattVoltage_15 (millivolt)
2018-10-08T05:28:12.004Z,1538976492.004 [CommandLine](IMPORTANT): BPC1.BattCapacity_16 (ampere_hour)
2018-10-08T05:28:12.004Z,1538976492.004 [CommandLine](IMPORTANT): BPC1.BattCurrent_16 (ampere)
2018-10-08T05:28:12.035Z,1538976492.035 [CommandLine](IMPORTANT): BPC1.BattSerial_16 (count)
2018-10-08T05:28:12.036Z,1538976492.036 [CommandLine](IMPORTANT): BPC1.BattStatus_16 (none)
2018-10-08T05:28:12.037Z,1538976492.037 [CommandLine](IMPORTANT): BPC1.BattTemp_16 (celsius)
2018-10-08T05:28:12.037Z,1538976492.037 [CommandLine](IMPORTANT): BPC1.BattVoltage_16 (millivolt)
2018-10-08T05:28:12.037Z,1538976492.037 [CommandLine](IMPORTANT): BPC1.BattCapacity_17 (ampere_hour)
2018-10-08T05:28:12.038Z,1538976492.038 [CommandLine](IMPORTANT): BPC1.BattCurrent_17 (ampere)
2018-10-08T05:28:12.038Z,1538976492.038 [CommandLine](IMPORTANT): BPC1.BattSerial_17 (count)
2018-10-08T05:28:12.039Z,1538976492.039 [CommandLine](IMPORTANT): BPC1.BattStatus_17 (none)
2018-10-08T05:28:12.039Z,1538976492.039 [CommandLine](IMPORTANT): BPC1.BattTemp_17 (celsius)
2018-10-08T05:28:12.039Z,1538976492.039 [CommandLine](IMPORTANT): BPC1.BattVoltage_17 (millivolt)
2018-10-08T05:28:12.040Z,1538976492.040 [CommandLine](IMPORTANT): BPC1.BattCapacity_18 (ampere_hour)
2018-10-08T05:28:12.040Z,1538976492.040 [CommandLine](IMPORTANT): BPC1.BattCurrent_18 (ampere)
2018-10-08T05:28:12.078Z,1538976492.078 [CommandLine](IMPORTANT): BPC1.BattSerial_18 (count)
2018-10-08T05:28:12.078Z,1538976492.078 [CommandLine](IMPORTANT): BPC1.BattStatus_18 (none)
2018-10-08T05:28:12.079Z,1538976492.079 [CommandLine](IMPORTANT): BPC1.BattTemp_18 (celsius)
2018-10-08T05:28:12.079Z,1538976492.079 [CommandLine](IMPORTANT): BPC1.BattVoltage_18 (millivolt)
2018-10-08T05:28:12.079Z,1538976492.079 [CommandLine](IMPORTANT): BPC1.BattCapacity_19 (ampere_hour)
2018-10-08T05:28:12.080Z,1538976492.080 [CommandLine](IMPORTANT): BPC1.BattCurrent_19 (ampere)
2018-10-08T05:28:12.080Z,1538976492.080 [CommandLine](IMPORTANT): BPC1.BattSerial_19 (count)
2018-10-08T05:28:12.080Z,1538976492.080 [CommandLine](IMPORTANT): BPC1.BattStatus_19 (none)
2018-10-08T05:28:12.093Z,1538976492.093 [CommandLine](IMPORTANT): BPC1.BattTemp_19 (celsius)
2018-10-08T05:28:12.094Z,1538976492.094 [CommandLine](IMPORTANT): BPC1.BattVoltage_19 (millivolt)
2018-10-08T05:28:12.094Z,1538976492.094 [CommandLine](IMPORTANT): BPC1.BattCapacity_20 (ampere_hour)
2018-10-08T05:28:12.094Z,1538976492.094 [CommandLine](IMPORTANT): BPC1.BattCurrent_20 (ampere)
2018-10-08T05:28:12.095Z,1538976492.095 [CommandLine](IMPORTANT): BPC1.BattSerial_20 (count)
2018-10-08T05:28:12.095Z,1538976492.095 [CommandLine](IMPORTANT): BPC1.BattStatus_20 (none)
2018-10-08T05:28:12.096Z,1538976492.096 [CommandLine](IMPORTANT): BPC1.BattTemp_20 (celsius)
2018-10-08T05:28:12.096Z,1538976492.096 [CommandLine](IMPORTANT): BPC1.BattVoltage_20 (millivolt)
2018-10-08T05:28:12.096Z,1538976492.096 [CommandLine](IMPORTANT): BPC1.BattCapacity_21 (ampere_hour)
2018-10-08T05:28:12.117Z,1538976492.117 [CommandLine](IMPORTANT): BPC1.BattCurrent_21 (ampere)
2018-10-08T05:28:12.117Z,1538976492.117 [CommandLine](IMPORTANT): BPC1.BattSerial_21 (count)
2018-10-08T05:28:12.118Z,1538976492.118 [CommandLine](IMPORTANT): BPC1.BattStatus_21 (none)
2018-10-08T05:28:12.118Z,1538976492.118 [CommandLine](IMPORTANT): BPC1.BattTemp_21 (celsius)
2018-10-08T05:28:12.119Z,1538976492.119 [CommandLine](IMPORTANT): BPC1.BattVoltage_21 (millivolt)
2018-10-08T05:28:12.119Z,1538976492.119 [CommandLine](IMPORTANT): BPC1.BattCapacity_22 (ampere_hour)
2018-10-08T05:28:12.119Z,1538976492.119 [CommandLine](IMPORTANT): BPC1.BattCurrent_22 (ampere)
2018-10-08T05:28:12.120Z,1538976492.120 [CommandLine](IMPORTANT): BPC1.BattSerial_22 (count)
2018-10-08T05:28:12.120Z,1538976492.120 [CommandLine](IMPORTANT): BPC1.BattStatus_22 (none)
2018-10-08T05:28:12.141Z,1538976492.141 [CommandLine](IMPORTANT): BPC1.BattTemp_22 (celsius)
2018-10-08T05:28:12.141Z,1538976492.141 [CommandLine](IMPORTANT): BPC1.BattVoltage_22 (millivolt)
2018-10-08T05:28:12.142Z,1538976492.142 [CommandLine](IMPORTANT): BPC1.BattCapacity_23 (ampere_hour)
2018-10-08T05:28:12.142Z,1538976492.142 [CommandLine](IMPORTANT): BPC1.BattCurrent_23 (ampere)
2018-10-08T05:28:12.142Z,1538976492.142 [CommandLine](IMPORTANT): BPC1.BattSerial_23 (count)
2018-10-08T05:28:12.143Z,1538976492.143 [CommandLine](IMPORTANT): BPC1.BattStatus_23 (none)
2018-10-08T05:28:12.143Z,1538976492.143 [CommandLine](IMPORTANT): BPC1.BattTemp_23 (celsius)
2018-10-08T05:28:12.144Z,1538976492.144 [CommandLine](IMPORTANT): BPC1.BattVoltage_23 (millivolt)
2018-10-08T05:28:12.144Z,1538976492.144 [CommandLine](IMPORTANT): BPC1.BattCapacity_24 (ampere_hour)
2018-10-08T05:28:12.144Z,1538976492.144 [CommandLine](IMPORTANT): BPC1.BattCurrent_24 (ampere)
2018-10-08T05:28:12.165Z,1538976492.165 [CommandLine](IMPORTANT): BPC1.BattSerial_24 (count)
2018-10-08T05:28:12.165Z,1538976492.165 [CommandLine](IMPORTANT): BPC1.BattStatus_24 (none)
2018-10-08T05:28:12.166Z,1538976492.166 [CommandLine](IMPORTANT): BPC1.BattTemp_24 (celsius)
2018-10-08T05:28:12.166Z,1538976492.166 [CommandLine](IMPORTANT): BPC1.BattVoltage_24 (millivolt)
2018-10-08T05:28:12.167Z,1538976492.167 [CommandLine](IMPORTANT): BPC1.BattCapacity_25 (ampere_hour)
2018-10-08T05:28:12.167Z,1538976492.167 [CommandLine](IMPORTANT): BPC1.BattCurrent_25 (ampere)
2018-10-08T05:28:12.167Z,1538976492.167 [CommandLine](IMPORTANT): BPC1.BattSerial_25 (count)
2018-10-08T05:28:12.168Z,1538976492.168 [CommandLine](IMPORTANT): BPC1.BattStatus_25 (none)
2018-10-08T05:28:12.168Z,1538976492.168 [CommandLine](IMPORTANT): BPC1.BattTemp_25 (celsius)
2018-10-08T05:28:12.193Z,1538976492.193 [CommandLine](IMPORTANT): BPC1.BattVoltage_25 (millivolt)
2018-10-08T05:28:12.193Z,1538976492.193 [CommandLine](IMPORTANT): BPC1.BattCapacity_26 (ampere_hour)
2018-10-08T05:28:12.194Z,1538976492.194 [CommandLine](IMPORTANT): BPC1.BattCurrent_26 (ampere)
2018-10-08T05:28:12.194Z,1538976492.194 [CommandLine](IMPORTANT): BPC1.BattSerial_26 (count)
2018-10-08T05:28:12.195Z,1538976492.195 [CommandLine](IMPORTANT): BPC1.BattStatus_26 (none)
2018-10-08T05:28:12.195Z,1538976492.195 [CommandLine](IMPORTANT): BPC1.BattTemp_26 (celsius)
2018-10-08T05:28:12.195Z,1538976492.195 [CommandLine](IMPORTANT): BPC1.BattVoltage_26 (millivolt)
2018-10-08T05:28:12.196Z,1538976492.196 [CommandLine](IMPORTANT): BPC1.BattCapacity_27 (ampere_hour)
2018-10-08T05:28:12.196Z,1538976492.196 [CommandLine](IMPORTANT): BPC1.BattCurrent_27 (ampere)
2018-10-08T05:28:12.196Z,1538976492.196 [CommandLine](IMPORTANT): BPC1.BattSerial_27 (count)
2018-10-08T05:28:12.217Z,1538976492.217 [CommandLine](IMPORTANT): BPC1.BattStatus_27 (none)
2018-10-08T05:28:12.218Z,1538976492.218 [CommandLine](IMPORTANT): BPC1.BattTemp_27 (celsius)
2018-10-08T05:28:12.218Z,1538976492.218 [CommandLine](IMPORTANT): BPC1.BattVoltage_27 (millivolt)
2018-10-08T05:28:12.218Z,1538976492.218 [CommandLine](IMPORTANT): BPC1.BattCapacity_28 (ampere_hour)
2018-10-08T05:28:12.219Z,1538976492.219 [CommandLine](IMPORTANT): BPC1.BattCurrent_28 (ampere)
2018-10-08T05:28:12.219Z,1538976492.219 [CommandLine](IMPORTANT): BPC1.BattSerial_28 (count)
2018-10-08T05:28:12.220Z,1538976492.220 [CommandLine](IMPORTANT): BPC1.BattStatus_28 (none)
2018-10-08T05:28:12.220Z,1538976492.220 [CommandLine](IMPORTANT): BPC1.BattTemp_28 (celsius)
2018-10-08T05:28:12.220Z,1538976492.220 [CommandLine](IMPORTANT): BPC1.BattVoltage_28 (millivolt)
2018-10-08T05:28:12.229Z,1538976492.229 [CommandLine](IMPORTANT): BPC1.BattCapacity_29 (ampere_hour)
2018-10-08T05:28:12.229Z,1538976492.229 [CommandLine](IMPORTANT): BPC1.BattCurrent_29 (ampere)
2018-10-08T05:28:12.230Z,1538976492.230 [CommandLine](IMPORTANT): BPC1.BattSerial_29 (count)
2018-10-08T05:28:12.230Z,1538976492.230 [CommandLine](IMPORTANT): BPC1.BattStatus_29 (none)
2018-10-08T05:28:12.231Z,1538976492.231 [CommandLine](IMPORTANT): BPC1.BattTemp_29 (celsius)
2018-10-08T05:28:12.231Z,1538976492.231 [CommandLine](IMPORTANT): BPC1.BattVoltage_29 (millivolt)
2018-10-08T05:28:12.231Z,1538976492.231 [CommandLine](IMPORTANT): BPC1.BattCapacity_30 (ampere_hour)
2018-10-08T05:28:12.232Z,1538976492.232 [CommandLine](IMPORTANT): BPC1.BattCurrent_30 (ampere)
2018-10-08T05:28:12.232Z,1538976492.232 [CommandLine](IMPORTANT): BPC1.BattSerial_30 (count)
2018-10-08T05:28:12.232Z,1538976492.232 [CommandLine](IMPORTANT): BPC1.BattStatus_30 (none)
2018-10-08T05:28:12.273Z,1538976492.273 [CommandLine](IMPORTANT): BPC1.BattTemp_30 (celsius)
2018-10-08T05:28:12.273Z,1538976492.273 [CommandLine](IMPORTANT): BPC1.BattVoltage_30 (millivolt)
2018-10-08T05:28:12.274Z,1538976492.274 [CommandLine](IMPORTANT): BPC1.BattCapacity_31 (ampere_hour)
2018-10-08T05:28:12.274Z,1538976492.274 [CommandLine](IMPORTANT): BPC1.BattCurrent_31 (ampere)
2018-10-08T05:28:12.275Z,1538976492.275 [CommandLine](IMPORTANT): BPC1.BattSerial_31 (count)
2018-10-08T05:28:12.275Z,1538976492.275 [CommandLine](IMPORTANT): BPC1.BattStatus_31 (none)
2018-10-08T05:28:12.275Z,1538976492.275 [CommandLine](IMPORTANT): BPC1.BattTemp_31 (celsius)
2018-10-08T05:28:12.276Z,1538976492.276 [CommandLine](IMPORTANT): BPC1.BattVoltage_31 (millivolt)
2018-10-08T05:28:12.276Z,1538976492.276 [CommandLine](IMPORTANT): BPC1.BattCapacity_32 (ampere_hour)
2018-10-08T05:28:12.276Z,1538976492.276 [CommandLine](IMPORTANT): BPC1.BattCurrent_32 (ampere)
2018-10-08T05:28:12.292Z,1538976492.292 [CommandLine](IMPORTANT): BPC1.BattSerial_32 (count)
2018-10-08T05:28:12.292Z,1538976492.292 [CommandLine](IMPORTANT): BPC1.BattStatus_32 (none)
2018-10-08T05:28:12.293Z,1538976492.293 [CommandLine](IMPORTANT): BPC1.BattTemp_32 (celsius)
2018-10-08T05:28:12.293Z,1538976492.293 [CommandLine](IMPORTANT): BPC1.BattVoltage_32 (millivolt)
2018-10-08T05:28:12.294Z,1538976492.294 [CommandLine](IMPORTANT): BPC1.BattCapacity_33 (ampere_hour)
2018-10-08T05:28:12.294Z,1538976492.294 [CommandLine](IMPORTANT): BPC1.BattCurrent_33 (ampere)
2018-10-08T05:28:12.294Z,1538976492.294 [CommandLine](IMPORTANT): BPC1.BattSerial_33 (count)
2018-10-08T05:28:12.295Z,1538976492.295 [CommandLine](IMPORTANT): BPC1.BattStatus_33 (none)
2018-10-08T05:28:12.295Z,1538976492.295 [CommandLine](IMPORTANT): BPC1.BattTemp_33 (celsius)
2018-10-08T05:28:12.295Z,1538976492.295 [CommandLine](IMPORTANT): BPC1.BattVoltage_33 (millivolt)
2018-10-08T05:28:12.296Z,1538976492.296 [CommandLine](IMPORTANT): BPC1.BattCapacity_34 (ampere_hour)
2018-10-08T05:28:12.296Z,1538976492.296 [CommandLine](IMPORTANT): BPC1.BattCurrent_34 (ampere)
2018-10-08T05:28:12.328Z,1538976492.328 [CommandLine](IMPORTANT): BPC1.BattSerial_34 (count)
2018-10-08T05:28:12.329Z,1538976492.329 [CommandLine](IMPORTANT): BPC1.BattStatus_34 (none)
2018-10-08T05:28:12.330Z,1538976492.330 [CommandLine](IMPORTANT): BPC1.BattTemp_34 (celsius)
2018-10-08T05:28:12.330Z,1538976492.330 [CommandLine](IMPORTANT): BPC1.BattVoltage_34 (millivolt)
2018-10-08T05:28:12.330Z,1538976492.330 [CommandLine](IMPORTANT): BPC1.BattCapacity_35 (ampere_hour)
2018-10-08T05:28:12.331Z,1538976492.331 [CommandLine](IMPORTANT): BPC1.BattCurrent_35 (ampere)
2018-10-08T05:28:12.331Z,1538976492.331 [CommandLine](IMPORTANT): BPC1.BattSerial_35 (count)
2018-10-08T05:28:12.331Z,1538976492.331 [CommandLine](IMPORTANT): BPC1.BattStatus_35 (none)
2018-10-08T05:28:12.332Z,1538976492.332 [CommandLine](IMPORTANT): BPC1.BattTemp_35 (celsius)
2018-10-08T05:28:12.332Z,1538976492.332 [CommandLine](IMPORTANT): BPC1.BattVoltage_35 (millivolt)
2018-10-08T05:28:12.368Z,1538976492.368 [CommandLine](IMPORTANT): BPC1.BattCapacity_36 (ampere_hour)
2018-10-08T05:28:12.369Z,1538976492.369 [CommandLine](IMPORTANT): BPC1.BattCurrent_36 (ampere)
2018-10-08T05:28:12.369Z,1538976492.369 [CommandLine](IMPORTANT): BPC1.BattSerial_36 (count)
2018-10-08T05:28:12.370Z,1538976492.370 [CommandLine](IMPORTANT): BPC1.BattStatus_36 (none)
2018-10-08T05:28:12.370Z,1538976492.370 [CommandLine](IMPORTANT): BPC1.BattTemp_36 (celsius)
2018-10-08T05:28:12.370Z,1538976492.370 [CommandLine](IMPORTANT): BPC1.BattVoltage_36 (millivolt)
2018-10-08T05:28:12.371Z,1538976492.371 [CommandLine](IMPORTANT): BPC1.BattCapacity_37 (ampere_hour)
2018-10-08T05:28:12.371Z,1538976492.371 [CommandLine](IMPORTANT): BPC1.BattCurrent_37 (ampere)
2018-10-08T05:28:12.372Z,1538976492.372 [CommandLine](IMPORTANT): BPC1.BattSerial_37 (count)
2018-10-08T05:28:12.372Z,1538976492.372 [CommandLine](IMPORTANT): BPC1.BattStatus_37 (none)
2018-10-08T05:28:12.372Z,1538976492.372 [CommandLine](IMPORTANT): BPC1.BattTemp_37 (celsius)
2018-10-08T05:28:12.415Z,1538976492.415 [CommandLine](IMPORTANT): BPC1.BattVoltage_37 (millivolt)
2018-10-08T05:28:12.416Z,1538976492.416 [CommandLine](IMPORTANT): BPC1.BattCapacity_38 (ampere_hour)
2018-10-08T05:28:12.417Z,1538976492.417 [CommandLine](IMPORTANT): BPC1.BattCurrent_38 (ampere)
2018-10-08T05:28:12.418Z,1538976492.418 [CommandLine](IMPORTANT): BPC1.BattSerial_38 (count)
2018-10-08T05:28:12.420Z,1538976492.420 [CommandLine](IMPORTANT): BPC1.BattStatus_38 (none)
2018-10-08T05:28:12.445Z,1538976492.445 [CommandLine](IMPORTANT): BPC1.BattTemp_38 (celsius)
2018-10-08T05:28:12.446Z,1538976492.446 [CommandLine](IMPORTANT): BPC1.BattVoltage_38 (millivolt)
2018-10-08T05:28:12.447Z,1538976492.447 [CommandLine](IMPORTANT): BPC1.BattCapacity_39 (ampere_hour)
2018-10-08T05:28:12.447Z,1538976492.447 [CommandLine](IMPORTANT): BPC1.BattCurrent_39 (ampere)
2018-10-08T05:28:12.448Z,1538976492.448 [CommandLine](IMPORTANT): BPC1.BattSerial_39 (count)
2018-10-08T05:28:12.448Z,1538976492.448 [CommandLine](IMPORTANT): BPC1.BattStatus_39 (none)
2018-10-08T05:28:12.470Z,1538976492.470 [CommandLine](IMPORTANT): BPC1.BattTemp_39 (celsius)
2018-10-08T05:28:12.471Z,1538976492.471 [CommandLine](IMPORTANT): BPC1.BattVoltage_39 (millivolt)
2018-10-08T05:28:12.471Z,1538976492.471 [CommandLine](IMPORTANT): BPC1.BattCapacity_40 (ampere_hour)
2018-10-08T05:28:12.472Z,1538976492.472 [CommandLine](IMPORTANT): BPC1.BattCurrent_40 (ampere)
2018-10-08T05:28:12.472Z,1538976492.472 [CommandLine](IMPORTANT): BPC1.BattSerial_40 (count)
2018-10-08T05:28:12.498Z,1538976492.498 [CommandLine](IMPORTANT): BPC1.BattStatus_40 (none)
2018-10-08T05:28:12.498Z,1538976492.498 [CommandLine](IMPORTANT): BPC1.BattTemp_40 (celsius)
2018-10-08T05:28:12.499Z,1538976492.499 [CommandLine](IMPORTANT): BPC1.BattVoltage_40 (millivolt)
2018-10-08T05:28:12.499Z,1538976492.499 [CommandLine](IMPORTANT): BPC1.BattCapacity_41 (ampere_hour)
2018-10-08T05:28:12.500Z,1538976492.500 [CommandLine](IMPORTANT): BPC1.BattCurrent_41 (ampere)
2018-10-08T05:28:12.500Z,1538976492.500 [CommandLine](IMPORTANT): BPC1.BattSerial_41 (count)
2018-10-08T05:28:12.529Z,1538976492.529 [CommandLine](IMPORTANT): BPC1.BattStatus_41 (none)
2018-10-08T05:28:12.529Z,1538976492.529 [CommandLine](IMPORTANT): BPC1.BattTemp_41 (celsius)
2018-10-08T05:28:12.530Z,1538976492.530 [CommandLine](IMPORTANT): BPC1.BattVoltage_41 (millivolt)
2018-10-08T05:28:12.530Z,1538976492.530 [CommandLine](IMPORTANT): BPC1.BattCapacity_42 (ampere_hour)
2018-10-08T05:28:12.531Z,1538976492.531 [CommandLine](IMPORTANT): BPC1.BattCurrent_42 (ampere)
2018-10-08T05:28:12.531Z,1538976492.531 [CommandLine](IMPORTANT): BPC1.BattSerial_42 (count)
2018-10-08T05:28:12.532Z,1538976492.532 [CommandLine](IMPORTANT): BPC1.BattStatus_42 (none)
2018-10-08T05:28:12.532Z,1538976492.532 [CommandLine](IMPORTANT): BPC1.BattTemp_42 (celsius)
2018-10-08T05:28:12.570Z,1538976492.570 [CommandLine](IMPORTANT): BPC1.BattVoltage_42 (millivolt)
2018-10-08T05:28:12.570Z,1538976492.570 [CommandLine](IMPORTANT): BPC1.BattCapacity_43 (ampere_hour)
2018-10-08T05:28:12.571Z,1538976492.571 [CommandLine](IMPORTANT): BPC1.BattCurrent_43 (ampere)
2018-10-08T05:28:12.572Z,1538976492.572 [CommandLine](IMPORTANT): BPC1.BattSerial_43 (count)
2018-10-08T05:28:12.572Z,1538976492.572 [CommandLine](IMPORTANT): BPC1.BattStatus_43 (none)
2018-10-08T05:28:12.585Z,1538976492.585 [CommandLine](IMPORTANT): BPC1.BattTemp_43 (celsius)
2018-10-08T05:28:12.586Z,1538976492.586 [CommandLine](IMPORTANT): BPC1.BattVoltage_43 (millivolt)
2018-10-08T05:28:12.588Z,1538976492.588 [CommandLine](IMPORTANT): BPC1.BattCapacity_44 (ampere_hour)
2018-10-08T05:28:12.622Z,1538976492.622 [CommandLine](IMPORTANT): BPC1.BattCurrent_44 (ampere)
2018-10-08T05:28:12.623Z,1538976492.623 [CommandLine](IMPORTANT): BPC1.BattSerial_44 (count)
2018-10-08T05:28:12.623Z,1538976492.623 [CommandLine](IMPORTANT): BPC1.BattStatus_44 (none)
2018-10-08T05:28:12.624Z,1538976492.624 [CommandLine](IMPORTANT): BPC1.BattTemp_44 (celsius)
2018-10-08T05:28:12.624Z,1538976492.624 [CommandLine](IMPORTANT): BPC1.BattVoltage_44 (millivolt)
2018-10-08T05:28:12.641Z,1538976492.641 [CommandLine](IMPORTANT): BPC1.BattCapacity_45 (ampere_hour)
2018-10-08T05:28:12.643Z,1538976492.643 [CommandLine](IMPORTANT): BPC1.BattCurrent_45 (ampere)
2018-10-08T05:28:12.644Z,1538976492.644 [CommandLine](IMPORTANT): BPC1.BattSerial_45 (count)
2018-10-08T05:28:12.677Z,1538976492.677 [CommandLine](IMPORTANT): BPC1.BattStatus_45 (none)
2018-10-08T05:28:12.677Z,1538976492.677 [CommandLine](IMPORTANT): BPC1.BattTemp_45 (celsius)
2018-10-08T05:28:12.679Z,1538976492.679 [CommandLine](IMPORTANT): BPC1.BattVoltage_45 (millivolt)
2018-10-08T05:28:12.679Z,1538976492.679 [CommandLine](IMPORTANT): BPC1.BattCapacity_46 (ampere_hour)
2018-10-08T05:28:12.681Z,1538976492.681 [CommandLine](IMPORTANT): BPC1.BattCurrent_46 (ampere)
2018-10-08T05:28:12.682Z,1538976492.682 [CommandLine](IMPORTANT): BPC1.BattSerial_46 (count)
2018-10-08T05:28:12.683Z,1538976492.683 [CommandLine](IMPORTANT): BPC1.BattStatus_46 (none)
2018-10-08T05:28:12.684Z,1538976492.684 [CommandLine](IMPORTANT): BPC1.BattTemp_46 (celsius)
2018-10-08T05:28:12.721Z,1538976492.721 [CommandLine](IMPORTANT): BPC1.BattVoltage_46 (millivolt)
2018-10-08T05:28:12.721Z,1538976492.721 [CommandLine](IMPORTANT): BPC1.BattCapacity_47 (ampere_hour)
2018-10-08T05:28:12.722Z,1538976492.722 [CommandLine](IMPORTANT): BPC1.BattCurrent_47 (ampere)
2018-10-08T05:28:12.722Z,1538976492.722 [CommandLine](IMPORTANT): BPC1.BattSerial_47 (count)
2018-10-08T05:28:12.722Z,1538976492.722 [CommandLine](IMPORTANT): BPC1.BattStatus_47 (none)
2018-10-08T05:28:12.723Z,1538976492.723 [CommandLine](IMPORTANT): BPC1.BattTemp_47 (celsius)
2018-10-08T05:28:12.723Z,1538976492.723 [CommandLine](IMPORTANT): BPC1.BattVoltage_47 (millivolt)
2018-10-08T05:28:12.723Z,1538976492.723 [CommandLine](IMPORTANT): BPC1.BattCapacity_48 (ampere_hour)
2018-10-08T05:28:12.724Z,1538976492.724 [CommandLine](IMPORTANT): BPC1.BattCurrent_48 (ampere)
2018-10-08T05:28:12.724Z,1538976492.724 [CommandLine](IMPORTANT): BPC1.BattSerial_48 (count)
2018-10-08T05:28:12.725Z,1538976492.725 [CommandLine](IMPORTANT): BPC1.BattStatus_48 (none)
2018-10-08T05:28:12.725Z,1538976492.725 [CommandLine](IMPORTANT): BPC1.BattTemp_48 (celsius)
2018-10-08T05:28:12.725Z,1538976492.725 [CommandLine](IMPORTANT): BPC1.BattVoltage_48 (millivolt)
2018-10-08T05:28:12.726Z,1538976492.726 [CommandLine](IMPORTANT): BPC1.BattCapacity_49 (ampere_hour)
2018-10-08T05:28:12.726Z,1538976492.726 [CommandLine](IMPORTANT): BPC1.BattCurrent_49 (ampere)
2018-10-08T05:28:12.727Z,1538976492.727 [CommandLine](IMPORTANT): BPC1.BattSerial_49 (count)
2018-10-08T05:28:12.727Z,1538976492.727 [CommandLine](IMPORTANT): BPC1.BattStatus_49 (none)
2018-10-08T05:28:12.727Z,1538976492.727 [CommandLine](IMPORTANT): BPC1.BattTemp_49 (celsius)
2018-10-08T05:28:12.728Z,1538976492.728 [CommandLine](IMPORTANT): BPC1.BattVoltage_49 (millivolt)
2018-10-08T05:28:12.728Z,1538976492.728 [CommandLine](IMPORTANT): BPC1.BattCapacity_50 (ampere_hour)
2018-10-08T05:28:12.728Z,1538976492.728 [CommandLine](IMPORTANT): BPC1.BattCurrent_50 (ampere)
2018-10-08T05:28:12.769Z,1538976492.769 [CommandLine](IMPORTANT): BPC1.BattSerial_50 (count)
2018-10-08T05:28:12.769Z,1538976492.769 [CommandLine](IMPORTANT): BPC1.BattStatus_50 (none)
2018-10-08T05:28:12.770Z,1538976492.770 [CommandLine](IMPORTANT): BPC1.BattTemp_50 (celsius)
2018-10-08T05:28:12.770Z,1538976492.770 [CommandLine](IMPORTANT): BPC1.BattVoltage_50 (millivolt)
2018-10-08T05:28:12.771Z,1538976492.771 [CommandLine](IMPORTANT): BPC1.BattCapacity_51 (ampere_hour)
2018-10-08T05:28:12.771Z,1538976492.771 [CommandLine](IMPORTANT): BPC1.BattCurrent_51 (ampere)
2018-10-08T05:28:12.771Z,1538976492.771 [CommandLine](IMPORTANT): BPC1.BattSerial_51 (count)
2018-10-08T05:28:12.772Z,1538976492.772 [CommandLine](IMPORTANT): BPC1.BattStatus_51 (none)
2018-10-08T05:28:12.772Z,1538976492.772 [CommandLine](IMPORTANT): BPC1.BattTemp_51 (celsius)
2018-10-08T05:28:12.773Z,1538976492.773 [CommandLine](IMPORTANT): BPC1.BattVoltage_51 (millivolt)
2018-10-08T05:28:12.773Z,1538976492.773 [CommandLine](IMPORTANT): BPC1.BattCapacity_52 (ampere_hour)
2018-10-08T05:28:12.773Z,1538976492.773 [CommandLine](IMPORTANT): BPC1.BattCurrent_52 (ampere)
2018-10-08T05:28:12.774Z,1538976492.774 [CommandLine](IMPORTANT): BPC1.BattSerial_52 (count)
2018-10-08T05:28:12.774Z,1538976492.774 [CommandLine](IMPORTANT): BPC1.BattStatus_52 (none)
2018-10-08T05:28:12.774Z,1538976492.774 [CommandLine](IMPORTANT): BPC1.BattTemp_52 (celsius)
2018-10-08T05:28:12.775Z,1538976492.775 [CommandLine](IMPORTANT): BPC1.BattVoltage_52 (millivolt)
2018-10-08T05:28:12.775Z,1538976492.775 [CommandLine](IMPORTANT): BPC1.BattCapacity_53 (ampere_hour)
2018-10-08T05:28:12.776Z,1538976492.776 [CommandLine](IMPORTANT): BPC1.BattCurrent_53 (ampere)
2018-10-08T05:28:12.776Z,1538976492.776 [CommandLine](IMPORTANT): BPC1.BattSerial_53 (count)
2018-10-08T05:28:12.776Z,1538976492.776 [CommandLine](IMPORTANT): BPC1.BattStatus_53 (none)
2018-10-08T05:28:12.809Z,1538976492.809 [CommandLine](IMPORTANT): BPC1.BattTemp_53 (celsius)
2018-10-08T05:28:12.809Z,1538976492.809 [CommandLine](IMPORTANT): BPC1.BattVoltage_53 (millivolt)
2018-10-08T05:28:12.810Z,1538976492.810 [CommandLine](IMPORTANT): BPC1.BattCapacity_54 (ampere_hour)
2018-10-08T05:28:12.810Z,1538976492.810 [CommandLine](IMPORTANT): BPC1.BattCurrent_54 (ampere)
2018-10-08T05:28:12.811Z,1538976492.811 [CommandLine](IMPORTANT): BPC1.BattSerial_54 (count)
2018-10-08T05:28:12.811Z,1538976492.811 [CommandLine](IMPORTANT): BPC1.BattStatus_54 (none)
2018-10-08T05:28:12.811Z,1538976492.811 [CommandLine](IMPORTANT): BPC1.BattTemp_54 (celsius)
2018-10-08T05:28:12.812Z,1538976492.812 [CommandLine](IMPORTANT): BPC1.BattVoltage_54 (millivolt)
2018-10-08T05:28:12.812Z,1538976492.812 [CommandLine](IMPORTANT): BPC1.BattCapacity_55 (ampere_hour)
2018-10-08T05:28:12.812Z,1538976492.812 [CommandLine](IMPORTANT): BPC1.BattCurrent_55 (ampere)
2018-10-08T05:28:12.831Z,1538976492.831 [CommandLine](IMPORTANT): BPC1.BattSerial_55 (count)
2018-10-08T05:28:12.832Z,1538976492.832 [CommandLine](IMPORTANT): BPC1.BattStatus_55 (none)
2018-10-08T05:28:12.832Z,1538976492.832 [CommandLine](IMPORTANT): BPC1.BattTemp_55 (celsius)
2018-10-08T05:28:12.832Z,1538976492.832 [CommandLine](IMPORTANT): BPC1.BattVoltage_55 (millivolt)
2018-10-08T05:28:12.833Z,1538976492.833 [CommandLine](IMPORTANT): BPC1.BattCapacity_56 (ampere_hour)
2018-10-08T05:28:12.833Z,1538976492.833 [CommandLine](IMPORTANT): BPC1.BattCurrent_56 (ampere)
2018-10-08T05:28:12.834Z,1538976492.834 [CommandLine](IMPORTANT): BPC1.BattSerial_56 (count)
2018-10-08T05:28:12.834Z,1538976492.834 [CommandLine](IMPORTANT): BPC1.BattStatus_56 (none)
2018-10-08T05:28:12.834Z,1538976492.834 [CommandLine](IMPORTANT): BPC1.BattTemp_56 (celsius)
2018-10-08T05:28:12.835Z,1538976492.835 [CommandLine](IMPORTANT): BPC1.BattVoltage_56 (millivolt)
2018-10-08T05:28:12.835Z,1538976492.835 [CommandLine](IMPORTANT): BPC1.BattCapacity_57 (ampere_hour)
2018-10-08T05:28:12.836Z,1538976492.836 [CommandLine](IMPORTANT): BPC1.BattCurrent_57 (ampere)
2018-10-08T05:28:12.836Z,1538976492.836 [CommandLine](IMPORTANT): BPC1.BattSerial_57 (count)
2018-10-08T05:28:12.836Z,1538976492.836 [CommandLine](IMPORTANT): BPC1.BattStatus_57 (none)
2018-10-08T05:28:12.869Z,1538976492.869 [CommandLine](IMPORTANT): BPC1.BattTemp_57 (celsius)
2018-10-08T05:28:12.870Z,1538976492.870 [CommandLine](IMPORTANT): BPC1.BattVoltage_57 (millivolt)
2018-10-08T05:28:12.870Z,1538976492.870 [CommandLine](IMPORTANT): BPC1.BattCapacity_58 (ampere_hour)
2018-10-08T05:28:12.871Z,1538976492.871 [CommandLine](IMPORTANT): BPC1.BattCurrent_58 (ampere)
2018-10-08T05:28:12.871Z,1538976492.871 [CommandLine](IMPORTANT): BPC1.BattSerial_58 (count)
2018-10-08T05:28:12.871Z,1538976492.871 [CommandLine](IMPORTANT): BPC1.BattStatus_58 (none)
2018-10-08T05:28:12.872Z,1538976492.872 [CommandLine](IMPORTANT): BPC1.BattTemp_58 (celsius)
2018-10-08T05:28:12.872Z,1538976492.872 [CommandLine](IMPORTANT): BPC1.BattVoltage_58 (millivolt)
2018-10-08T05:28:12.872Z,1538976492.872 [CommandLine](IMPORTANT): BPC1.BattCapacity_59 (ampere_hour)
2018-10-08T05:28:12.873Z,1538976492.873 [CommandLine](IMPORTANT): BPC1.BattCurrent_59 (ampere)
2018-10-08T05:28:12.873Z,1538976492.873 [CommandLine](IMPORTANT): BPC1.BattSerial_59 (count)
2018-10-08T05:28:12.874Z,1538976492.874 [CommandLine](IMPORTANT): BPC1.BattStatus_59 (none)
2018-10-08T05:28:12.874Z,1538976492.874 [CommandLine](IMPORTANT): BPC1.BattTemp_59 (celsius)
2018-10-08T05:28:12.875Z,1538976492.875 [CommandLine](IMPORTANT): BPC1.BattVoltage_59 (millivolt)
2018-10-08T05:28:12.875Z,1538976492.875 [CommandLine](IMPORTANT): BPC1.BattCapacity_60 (ampere_hour)
2018-10-08T05:28:12.875Z,1538976492.875 [CommandLine](IMPORTANT): BPC1.BattCurrent_60 (ampere)
2018-10-08T05:28:12.876Z,1538976492.876 [CommandLine](IMPORTANT): BPC1.BattSerial_60 (count)
2018-10-08T05:28:12.876Z,1538976492.876 [CommandLine](IMPORTANT): BPC1.BattStatus_60 (none)
2018-10-08T05:28:12.876Z,1538976492.876 [CommandLine](IMPORTANT): BPC1.BattTemp_60 (celsius)
2018-10-08T05:28:12.906Z,1538976492.906 [CommandLine](IMPORTANT): BPC1.BattVoltage_60 (millivolt)
2018-10-08T05:28:12.906Z,1538976492.906 [CommandLine](IMPORTANT): BPC1.BattCapacity_61 (ampere_hour)
2018-10-08T05:28:12.907Z,1538976492.907 [CommandLine](IMPORTANT): BPC1.BattCurrent_61 (ampere)
2018-10-08T05:28:12.907Z,1538976492.907 [CommandLine](IMPORTANT): BPC1.BattSerial_61 (count)
2018-10-08T05:28:12.907Z,1538976492.907 [CommandLine](IMPORTANT): BPC1.BattStatus_61 (none)
2018-10-08T05:28:12.908Z,1538976492.908 [CommandLine](IMPORTANT): BPC1.BattTemp_61 (celsius)
2018-10-08T05:28:12.908Z,1538976492.908 [CommandLine](IMPORTANT): BPC1.BattVoltage_61 (millivolt)
2018-10-08T05:28:12.926Z,1538976492.926 [CommandLine](IMPORTANT): BPC1.BattCapacity_62 (ampere_hour)
2018-10-08T05:28:12.927Z,1538976492.927 [CommandLine](IMPORTANT): BPC1.BattCurrent_62 (ampere)
2018-10-08T05:28:12.928Z,1538976492.928 [CommandLine](IMPORTANT): BPC1.BattSerial_62 (count)
2018-10-08T05:28:12.928Z,1538976492.928 [CommandLine](IMPORTANT): BPC1.BattStatus_62 (none)
2018-10-08T05:28:12.929Z,1538976492.929 [CommandLine](IMPORTANT): BPC1.BattTemp_62 (celsius)
2018-10-08T05:28:12.929Z,1538976492.929 [CommandLine](IMPORTANT): BPC1.BattVoltage_62 (millivolt)
2018-10-08T05:28:12.983Z,1538976492.983 [CommandLine](IMPORTANT): BPC1.durationOfLastRun (second)
2018-10-08T05:28:17.259Z,1538976497.259 [Default:A.Wait](INFO): Done Waiting.
2018-10-08T05:28:17.259Z,1538976497.259 [Default:A.Wait] Stopped
2018-10-08T05:28:17.259Z,1538976497.259 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T05:28:17.650Z,1538976497.650 [Default:CheckIn] Running Loop=1
2018-10-08T05:28:17.650Z,1538976497.650 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T05:28:17.651Z,1538976497.651 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T05:28:18.058Z,1538976498.058 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-10-08T05:28:36.201Z,1538976516.201 [CommandLine](IMPORTANT): got command get BPC1.BattStatus_62
2018-10-08T05:28:36.202Z,1538976516.202 [CommandLine](IMPORTANT): BPC1.BattStatus_62 19152 n/a
2018-10-08T05:30:23.382Z,1538976623.382 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-10-08T05:30:43.837Z,1538976643.837 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:30:43.837Z,1538976643.837 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-08T05:30:43.837Z,1538976643.837 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:30:43.872Z,1538976643.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:30:44.237Z,1538976644.237 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:30:44.238Z,1538976644.238 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-08T05:30:44.672Z,1538976644.672 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:30:44.673Z,1538976644.673 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:30:44.673Z,1538976644.673 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:30:49.932Z,1538976649.932 [CommandLine](IMPORTANT): got command get BPC1.BattStatus_45
2018-10-08T05:30:49.933Z,1538976649.933 [CommandLine](IMPORTANT): BPC1.BattStatus_45 19136 n/a
2018-10-08T05:31:20.111Z,1538976680.111 [CommandLine](IMPORTANT): got command get BPC1.BattStatus_46
2018-10-08T05:31:20.111Z,1538976680.111 [CommandLine](IMPORTANT): BPC1.BattStatus_46 18624 n/a
2018-10-08T05:33:17.723Z,1538976797.723 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T05:28:17.7Z
2018-10-08T05:33:17.723Z,1538976797.723 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T05:33:17.723Z,1538976797.723 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T05:33:18.116Z,1538976798.116 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-10-08T05:33:23.627Z,1538976803.627 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0004.lzma
2018-10-08T05:33:24.423Z,1538976804.423 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0004.lzma.bak
2018-10-08T05:33:24.424Z,1538976804.424 [DataOverHttps](INFO): SBD MOMSN=8613526
2018-10-08T05:33:34.153Z,1538976814.153 [DataOverHttps](INFO): Sending 1371 bytes from file Logs/20181008T052431/Express0001.lzma
2018-10-08T05:33:34.944Z,1538976814.944 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0001.lzma.bak
2018-10-08T05:33:34.945Z,1538976814.945 [DataOverHttps](INFO): SBD MOMSN=8613528
2018-10-08T05:33:44.607Z,1538976824.607 [DataOverHttps](INFO): Sending 1588 bytes from file Logs/20181008T052431/Express0005.lzma
2018-10-08T05:33:44.680Z,1538976824.680 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:33:44.680Z,1538976824.680 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-08T05:33:44.680Z,1538976824.680 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:33:44.706Z,1538976824.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:33:45.159Z,1538976825.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:33:45.159Z,1538976825.159 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-08T05:33:45.367Z,1538976825.367 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0005.lzma.bak
2018-10-08T05:33:45.368Z,1538976825.368 [DataOverHttps](INFO): SBD MOMSN=8613530
2018-10-08T05:33:45.452Z,1538976825.452 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:33:45.453Z,1538976825.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:33:45.453Z,1538976825.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:33:46.575Z,1538976826.575 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T05:33:46.575Z,1538976826.575 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T05:33:46.576Z,1538976826.576 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T05:35:22.754Z,1538976922.754 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T05:35:22.754Z,1538976922.754 [NAL9602] Data Fault, FailCount= 1
2018-10-08T05:35:22.754Z,1538976922.754 [NAL9602](ERROR): Data Fault
2018-10-08T05:35:22.843Z,1538976922.843 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T05:35:23.161Z,1538976923.161 [NAL9602](INFO): Powering down
2018-10-08T05:35:24.024Z,1538976924.024 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T05:35:24.024Z,1538976924.024 [NAL9602] No Fault, FailCount= 1
2018-10-08T05:35:53.402Z,1538976953.402 [NAL9602](INFO): Powering up NAL9602
2018-10-08T05:36:04.606Z,1538976964.606 [NAL9602](INFO): NAL9602 initialized
2018-10-08T05:36:45.468Z,1538977005.468 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:36:45.468Z,1538977005.468 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-08T05:36:45.468Z,1538977005.468 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:36:45.482Z,1538977005.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:36:45.887Z,1538977005.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:36:45.887Z,1538977005.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-08T05:36:46.249Z,1538977006.249 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:36:46.250Z,1538977006.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:36:46.250Z,1538977006.250 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:38:47.104Z,1538977127.104 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T05:38:47.104Z,1538977127.104 [Default:CheckIn:C.Wait] Stopped
2018-10-08T05:38:47.104Z,1538977127.104 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T05:38:47.117Z,1538977127.117 [Default:CheckIn:D] Running Loop=1
2018-10-08T05:38:47.494Z,1538977127.494 [Default:CheckIn:D] Stopped
2018-10-08T05:38:47.494Z,1538977127.494 [Default:CheckIn:E] Running Loop=1
2018-10-08T05:38:50.835Z,1538977130.835 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.726705 min 
2018-10-08T05:38:50.837Z,1538977130.837 [Default:CheckIn:E] Stopped
2018-10-08T05:38:50.837Z,1538977130.837 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T05:38:50.837Z,1538977130.837 [Default:CheckIn] Stopped
2018-10-08T05:38:50.837Z,1538977130.837 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T05:38:50.838Z,1538977130.838 [Default:CheckIn](INFO): Running loop #2
2018-10-08T05:38:50.838Z,1538977130.838 [Default:CheckIn] Running Loop=2
2018-10-08T05:38:50.838Z,1538977130.838 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T05:38:50.838Z,1538977130.838 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T05:39:44.555Z,1538977184.555 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T05:39:44.555Z,1538977184.555 [DropWeight] No Fault, FailCount= 1
2018-10-08T05:39:46.529Z,1538977186.529 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:39:46.529Z,1538977186.529 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-08T05:39:46.529Z,1538977186.529 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:39:46.542Z,1538977186.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:39:46.962Z,1538977186.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:39:46.962Z,1538977186.962 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-08T05:39:47.322Z,1538977187.322 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:39:47.322Z,1538977187.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:39:47.323Z,1538977187.323 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:42:47.373Z,1538977367.373 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:42:47.373Z,1538977367.373 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-08T05:42:47.373Z,1538977367.373 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:42:47.398Z,1538977367.398 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:42:47.783Z,1538977367.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:42:47.784Z,1538977367.784 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-08T05:42:51.277Z,1538977371.277 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:42:51.277Z,1538977371.277 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:42:51.278Z,1538977371.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:43:51.957Z,1538977431.957 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T05:38:50.8Z
2018-10-08T05:43:51.957Z,1538977431.957 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T05:43:51.958Z,1538977431.958 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T05:43:57.352Z,1538977437.352 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0007.lzma
2018-10-08T05:43:58.151Z,1538977438.151 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0007.lzma.bak
2018-10-08T05:43:58.152Z,1538977438.152 [DataOverHttps](INFO): SBD MOMSN=8613536
2018-10-08T05:44:08.043Z,1538977448.043 [DataOverHttps](INFO): Sending 171 bytes from file Logs/20181008T052431/Express0008.lzma
2018-10-08T05:44:08.844Z,1538977448.844 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0008.lzma.bak
2018-10-08T05:44:08.844Z,1538977448.844 [DataOverHttps](INFO): SBD MOMSN=8613540
2018-10-08T05:44:09.913Z,1538977449.913 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T05:44:09.913Z,1538977449.913 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T05:44:09.913Z,1538977449.913 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T05:45:51.650Z,1538977551.650 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:45:51.651Z,1538977551.651 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-08T05:45:51.651Z,1538977551.651 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:45:51.664Z,1538977551.664 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:45:52.099Z,1538977552.099 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:45:52.099Z,1538977552.099 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-08T05:45:52.475Z,1538977552.475 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:45:52.475Z,1538977552.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:45:52.475Z,1538977552.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:46:06.803Z,1538977566.803 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T05:46:06.803Z,1538977566.803 [NAL9602] Data Fault, FailCount= 2
2018-10-08T05:46:06.803Z,1538977566.803 [NAL9602](ERROR): Data Fault
2018-10-08T05:46:06.889Z,1538977566.889 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T05:46:07.202Z,1538977567.202 [NAL9602](INFO): Powering down
2018-10-08T05:46:08.084Z,1538977568.084 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T05:46:08.089Z,1538977568.089 [NAL9602] No Fault, FailCount= 2
2018-10-08T05:46:37.423Z,1538977597.423 [NAL9602](INFO): Powering up NAL9602
2018-10-08T05:46:48.623Z,1538977608.623 [NAL9602](INFO): NAL9602 initialized
2018-10-08T05:48:52.763Z,1538977732.763 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:48:52.763Z,1538977732.763 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-08T05:48:52.763Z,1538977732.763 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:48:52.776Z,1538977732.776 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:48:53.214Z,1538977733.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:48:53.214Z,1538977733.214 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-08T05:48:53.568Z,1538977733.568 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:48:53.573Z,1538977733.573 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:48:53.573Z,1538977733.573 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:49:10.364Z,1538977750.364 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T05:49:10.365Z,1538977750.365 [Default:CheckIn:C.Wait] Stopped
2018-10-08T05:49:10.365Z,1538977750.365 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T05:49:10.365Z,1538977750.365 [Default:CheckIn:D] Running Loop=1
2018-10-08T05:49:10.763Z,1538977750.763 [Default:CheckIn:D] Stopped
2018-10-08T05:49:10.763Z,1538977750.763 [Default:CheckIn:E] Running Loop=1
2018-10-08T05:49:11.165Z,1538977751.165 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.114547 min 
2018-10-08T05:49:11.166Z,1538977751.166 [Default:CheckIn:E] Stopped
2018-10-08T05:49:11.166Z,1538977751.166 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T05:49:11.166Z,1538977751.166 [Default:CheckIn] Stopped
2018-10-08T05:49:11.166Z,1538977751.166 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T05:49:11.166Z,1538977751.166 [Default:CheckIn](INFO): Running loop #3
2018-10-08T05:49:11.166Z,1538977751.166 [Default:CheckIn] Running Loop=3
2018-10-08T05:49:11.167Z,1538977751.167 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T05:49:11.167Z,1538977751.167 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T05:51:53.839Z,1538977913.839 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:51:53.839Z,1538977913.839 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-08T05:51:53.839Z,1538977913.839 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:51:53.852Z,1538977913.852 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:51:54.254Z,1538977914.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:51:54.254Z,1538977914.254 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-08T05:51:54.643Z,1538977914.643 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:51:54.644Z,1538977914.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:51:54.644Z,1538977914.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:54:11.449Z,1538978051.449 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T05:49:11.2Z
2018-10-08T05:54:11.449Z,1538978051.449 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T05:54:11.449Z,1538978051.449 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T05:54:15.715Z,1538978055.715 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0010.lzma
2018-10-08T05:54:16.507Z,1538978056.507 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0010.lzma.bak
2018-10-08T05:54:16.508Z,1538978056.508 [DataOverHttps](INFO): SBD MOMSN=8613544
2018-10-08T05:54:27.066Z,1538978067.066 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T052431/Express0011.lzma
2018-10-08T05:54:27.863Z,1538978067.863 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0011.lzma.bak
2018-10-08T05:54:27.864Z,1538978067.864 [DataOverHttps](INFO): SBD MOMSN=8613548
2018-10-08T05:54:28.859Z,1538978068.859 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T05:54:28.859Z,1538978068.859 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T05:54:28.859Z,1538978068.859 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T05:54:54.837Z,1538978094.837 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:54:54.837Z,1538978094.837 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-08T05:54:54.837Z,1538978094.837 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:54:54.901Z,1538978094.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:54:55.189Z,1538978095.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:54:55.189Z,1538978095.189 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-08T05:54:55.573Z,1538978095.573 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:54:55.573Z,1538978095.573 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:54:55.574Z,1538978095.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:56:50.783Z,1538978210.783 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T05:56:50.783Z,1538978210.783 [NAL9602] Data Fault, FailCount= 3
2018-10-08T05:56:50.783Z,1538978210.783 [NAL9602](ERROR): Data Fault
2018-10-08T05:56:50.879Z,1538978210.879 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T05:56:51.192Z,1538978211.192 [NAL9602](INFO): Powering down
2018-10-08T05:56:52.057Z,1538978212.057 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T05:56:52.057Z,1538978212.057 [NAL9602] No Fault, FailCount= 3
2018-10-08T05:57:21.583Z,1538978241.583 [NAL9602](INFO): Powering up NAL9602
2018-10-08T05:57:33.580Z,1538978253.580 [NAL9602](INFO): NAL9602 initialized
2018-10-08T05:57:55.662Z,1538978275.662 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T05:57:55.662Z,1538978275.662 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-08T05:57:55.662Z,1538978275.662 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T05:57:55.727Z,1538978275.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T05:57:56.095Z,1538978276.095 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T05:57:56.095Z,1538978276.095 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-08T05:57:56.448Z,1538978276.448 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T05:57:56.449Z,1538978276.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T05:57:56.449Z,1538978276.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T05:59:29.268Z,1538978369.268 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T05:59:29.273Z,1538978369.273 [Default:CheckIn:C.Wait] Stopped
2018-10-08T05:59:29.273Z,1538978369.273 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T05:59:29.273Z,1538978369.273 [Default:CheckIn:D] Running Loop=1
2018-10-08T05:59:29.672Z,1538978369.672 [Default:CheckIn:D] Stopped
2018-10-08T05:59:29.672Z,1538978369.672 [Default:CheckIn:E] Running Loop=1
2018-10-08T05:59:33.216Z,1538978373.216 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.429696 min 
2018-10-08T05:59:33.217Z,1538978373.217 [Default:CheckIn:E] Stopped
2018-10-08T05:59:33.217Z,1538978373.217 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T05:59:33.217Z,1538978373.217 [Default:CheckIn] Stopped
2018-10-08T05:59:33.217Z,1538978373.217 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T05:59:33.217Z,1538978373.217 [Default:CheckIn](INFO): Running loop #4
2018-10-08T05:59:33.217Z,1538978373.217 [Default:CheckIn] Running Loop=4
2018-10-08T05:59:33.217Z,1538978373.217 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T05:59:33.218Z,1538978373.218 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T06:00:56.573Z,1538978456.573 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:00:56.574Z,1538978456.574 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-08T06:00:56.574Z,1538978456.574 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:00:56.659Z,1538978456.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:00:56.909Z,1538978456.909 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:00:56.909Z,1538978456.909 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-08T06:00:57.299Z,1538978457.299 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:00:57.300Z,1538978457.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:00:57.300Z,1538978457.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:03:57.496Z,1538978637.496 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:03:57.496Z,1538978637.496 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-08T06:03:57.496Z,1538978637.496 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:03:57.509Z,1538978637.509 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:03:57.934Z,1538978637.934 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:03:57.934Z,1538978637.934 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-08T06:03:58.307Z,1538978638.307 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:03:58.307Z,1538978638.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:03:58.308Z,1538978638.308 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:04:34.146Z,1538978674.146 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T05:59:33.2Z
2018-10-08T06:04:34.146Z,1538978674.146 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T06:04:34.146Z,1538978674.146 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T06:04:39.574Z,1538978679.574 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0013.lzma
2018-10-08T06:04:40.353Z,1538978680.353 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0013.lzma.bak
2018-10-08T06:04:40.353Z,1538978680.353 [DataOverHttps](INFO): SBD MOMSN=8613552
2018-10-08T06:04:50.895Z,1538978690.895 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T052431/Express0014.lzma
2018-10-08T06:04:51.687Z,1538978691.687 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0014.lzma.bak
2018-10-08T06:04:51.688Z,1538978691.688 [DataOverHttps](INFO): SBD MOMSN=8613556
2018-10-08T06:04:52.852Z,1538978692.852 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T06:04:52.852Z,1538978692.852 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T06:04:52.852Z,1538978692.852 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T06:06:58.578Z,1538978818.578 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:06:58.579Z,1538978818.579 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-08T06:06:58.579Z,1538978818.579 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:06:58.660Z,1538978818.660 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:06:58.946Z,1538978818.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:06:58.946Z,1538978818.946 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-08T06:06:59.297Z,1538978819.297 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:06:59.298Z,1538978819.298 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:06:59.298Z,1538978819.298 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:07:34.843Z,1538978854.843 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T06:07:34.843Z,1538978854.843 [NAL9602] Data Fault, FailCount= 4
2018-10-08T06:07:34.843Z,1538978854.843 [NAL9602](ERROR): Data Fault
2018-10-08T06:07:35.016Z,1538978855.016 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T06:07:35.242Z,1538978855.242 [NAL9602](INFO): Powering down
2018-10-08T06:07:36.122Z,1538978856.122 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T06:07:36.122Z,1538978856.122 [NAL9602] No Fault, FailCount= 4
2018-10-08T06:08:05.507Z,1538978885.507 [NAL9602](INFO): Powering up NAL9602
2018-10-08T06:08:16.307Z,1538978896.307 [NAL9602](INFO): NAL9602 initialized
2018-10-08T06:09:45.918Z,1538978985.918 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T06:09:45.918Z,1538978985.918 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T06:09:45.918Z,1538978985.918 [DropWeight](ERROR): Hardware Fault
2018-10-08T06:09:46.015Z,1538978986.015 [CBIT](INFO): Critical error at 20181008T060945
2018-10-08T06:09:46.017Z,1538978986.017 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T06:09:46.018Z,1538978986.018 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T06:09:46.485Z,1538978986.485 [CBIT](INFO): Critical error at 20181008T060946
2018-10-08T06:09:53.201Z,1538978993.201 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T06:09:53.201Z,1538978993.201 [Default:CheckIn:C.Wait] Stopped
2018-10-08T06:09:53.201Z,1538978993.201 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T06:09:53.201Z,1538978993.201 [Default:CheckIn:D] Running Loop=1
2018-10-08T06:09:53.578Z,1538978993.578 [Default:CheckIn:D] Stopped
2018-10-08T06:09:53.578Z,1538978993.578 [Default:CheckIn:E] Running Loop=1
2018-10-08T06:09:53.979Z,1538978993.979 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.828137 min 
2018-10-08T06:09:53.980Z,1538978993.980 [Default:CheckIn:E] Stopped
2018-10-08T06:09:53.980Z,1538978993.980 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T06:09:53.980Z,1538978993.980 [Default:CheckIn] Stopped
2018-10-08T06:09:53.980Z,1538978993.980 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T06:09:53.980Z,1538978993.980 [Default:CheckIn](INFO): Running loop #5
2018-10-08T06:09:53.980Z,1538978993.980 [Default:CheckIn] Running Loop=5
2018-10-08T06:09:53.985Z,1538978993.985 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T06:09:53.986Z,1538978993.986 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T06:09:59.589Z,1538978999.589 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:09:59.589Z,1538978999.589 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-08T06:09:59.589Z,1538978999.589 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:09:59.602Z,1538978999.602 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:10:00.001Z,1538979000.001 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:10:00.001Z,1538979000.001 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-08T06:10:00.439Z,1538979000.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:10:00.440Z,1538979000.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:10:00.441Z,1538979000.441 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:13:00.667Z,1538979180.667 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:13:00.667Z,1538979180.667 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-08T06:13:00.667Z,1538979180.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:13:00.698Z,1538979180.698 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:13:01.060Z,1538979181.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:13:01.060Z,1538979181.060 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-08T06:13:01.388Z,1538979181.388 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:13:01.389Z,1538979181.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:13:01.390Z,1538979181.390 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:14:54.104Z,1538979294.104 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T06:09:53.0Z
2018-10-08T06:14:54.104Z,1538979294.104 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T06:14:54.104Z,1538979294.104 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T06:14:58.204Z,1538979298.204 [DataOverHttps](INFO): Sending 105 bytes from file Logs/20181008T052431/Courier0016.lzma
2018-10-08T06:14:58.996Z,1538979298.996 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0016.lzma.bak
2018-10-08T06:14:58.996Z,1538979298.996 [DataOverHttps](INFO): SBD MOMSN=8613560
2018-10-08T06:15:08.992Z,1538979308.992 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T052431/Express0017.lzma
2018-10-08T06:15:09.775Z,1538979309.775 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0017.lzma.bak
2018-10-08T06:15:09.776Z,1538979309.776 [DataOverHttps](INFO): SBD MOMSN=8613564
2018-10-08T06:15:10.954Z,1538979310.954 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T06:15:10.954Z,1538979310.954 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T06:15:10.954Z,1538979310.954 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T06:16:01.699Z,1538979361.699 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:16:01.699Z,1538979361.699 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-08T06:16:01.699Z,1538979361.699 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:16:01.722Z,1538979361.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:16:02.140Z,1538979362.140 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:16:02.140Z,1538979362.140 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-08T06:16:02.605Z,1538979362.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:16:02.607Z,1538979362.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:16:02.608Z,1538979362.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:18:17.387Z,1538979497.387 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T06:18:17.387Z,1538979497.387 [NAL9602] Data Fault, FailCount= 5
2018-10-08T06:18:17.387Z,1538979497.387 [NAL9602](ERROR): Data Fault
2018-10-08T06:18:17.481Z,1538979497.481 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T06:18:17.482Z,1538979497.482 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T06:18:17.786Z,1538979497.786 [NAL9602](INFO): Powering down
2018-10-08T06:18:17.867Z,1538979497.867 [CBIT](INFO): Critical error at 20181008T061817
2018-10-08T06:19:02.655Z,1538979542.655 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:19:02.656Z,1538979542.656 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-08T06:19:02.656Z,1538979542.656 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:19:02.707Z,1538979542.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:19:03.068Z,1538979543.068 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:19:03.068Z,1538979543.068 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-08T06:19:03.439Z,1538979543.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:19:03.440Z,1538979543.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:19:03.440Z,1538979543.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:19:33.249Z,1538979573.249 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-10-08T06:19:33.249Z,1538979573.249 [Rowe_600LCM] Communications Fault, FailCount= 1
2018-10-08T06:19:33.249Z,1538979573.249 [Rowe_600LCM](ERROR): Communications Fault
2018-10-08T06:19:33.473Z,1538979573.473 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2018-10-08T06:19:33.653Z,1538979573.653 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-10-08T06:19:33.748Z,1538979573.748 [Rowe_600LCM](INFO): Powering down
2018-10-08T06:19:35.073Z,1538979575.073 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2018-10-08T06:19:35.073Z,1538979575.073 [Rowe_600LCM] No Fault, FailCount= 1
2018-10-08T06:19:35.366Z,1538979575.366 [Rowe_600LCM](INFO): Initializing
2018-10-08T06:19:35.366Z,1538979575.366 [Rowe_600LCM](INFO): Checking LCM
2018-10-08T06:19:35.366Z,1538979575.366 [Rowe_600LCM](INFO): LCM OK
2018-10-08T06:19:35.367Z,1538979575.367 [Rowe_600LCM](INFO): Powering up
2018-10-08T06:19:39.609Z,1538979579.609 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-10-08T06:19:39.675Z,1538979579.675 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 9600 >& /dev/null &
2018-10-08T06:19:39.680Z,1538979579.680 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-10-08T06:19:39.684Z,1538979579.684 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-10-08T06:19:39.684Z,1538979579.684 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-10-08T06:19:41.475Z,1538979581.475 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.396889 seconds old.
2018-10-08T06:19:41.860Z,1538979581.860 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.782489 seconds old.
2018-10-08T06:19:42.263Z,1538979582.263 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.184592 seconds old.
2018-10-08T06:20:11.091Z,1538979611.091 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T06:20:11.092Z,1538979611.092 [Default:CheckIn:C.Wait] Stopped
2018-10-08T06:20:11.092Z,1538979611.092 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T06:20:11.092Z,1538979611.092 [Default:CheckIn:D] Running Loop=1
2018-10-08T06:20:11.462Z,1538979611.462 [Default:CheckIn:D] Stopped
2018-10-08T06:20:11.463Z,1538979611.463 [Default:CheckIn:E] Running Loop=1
2018-10-08T06:20:11.856Z,1538979611.856 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.126208 min 
2018-10-08T06:20:11.856Z,1538979611.856 [Default:CheckIn:E] Stopped
2018-10-08T06:20:11.856Z,1538979611.856 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T06:20:11.857Z,1538979611.857 [Default:CheckIn] Stopped
2018-10-08T06:20:11.857Z,1538979611.857 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T06:20:11.857Z,1538979611.857 [Default:CheckIn](INFO): Running loop #6
2018-10-08T06:20:11.857Z,1538979611.857 [Default:CheckIn] Running Loop=6
2018-10-08T06:20:11.857Z,1538979611.857 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T06:20:11.857Z,1538979611.857 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T06:20:17.779Z,1538979617.779 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T06:20:17.779Z,1538979617.779 [NAL9602] No Fault, FailCount= 5
2018-10-08T06:20:18.122Z,1538979618.122 [NAL9602](INFO): Powering up NAL9602
2018-10-08T06:20:29.326Z,1538979629.326 [NAL9602](INFO): NAL9602 initialized
2018-10-08T06:22:03.604Z,1538979723.604 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:22:03.604Z,1538979723.604 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-08T06:22:03.605Z,1538979723.605 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:22:03.646Z,1538979723.646 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:22:04.014Z,1538979724.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:22:04.015Z,1538979724.015 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-08T06:22:04.395Z,1538979724.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:22:04.396Z,1538979724.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:22:04.396Z,1538979724.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:24:46.299Z,1538979886.299 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T06:24:46.299Z,1538979886.299 [DropWeight] No Fault, FailCount= 1
2018-10-08T06:25:04.702Z,1538979904.702 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:25:04.702Z,1538979904.702 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-08T06:25:04.702Z,1538979904.702 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:25:04.728Z,1538979904.728 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:25:04.733Z,1538979904.733 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:25:11.895Z,1538979911.895 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T06:20:11.9Z
2018-10-08T06:25:11.895Z,1538979911.895 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T06:25:11.895Z,1538979911.895 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T06:25:16.487Z,1538979916.487 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181008T052431/Courier0019.lzma
2018-10-08T06:25:17.279Z,1538979917.279 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0019.lzma.bak
2018-10-08T06:25:17.280Z,1538979917.280 [DataOverHttps](INFO): SBD MOMSN=8613568
2018-10-08T06:25:26.931Z,1538979926.931 [DataOverHttps](INFO): Sending 286 bytes from file Logs/20181008T052431/Express0020.lzma
2018-10-08T06:25:27.723Z,1538979927.723 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0020.lzma.bak
2018-10-08T06:25:27.724Z,1538979927.724 [DataOverHttps](INFO): SBD MOMSN=8613572
2018-10-08T06:25:28.875Z,1538979928.875 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T06:25:28.875Z,1538979928.875 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T06:25:28.875Z,1538979928.875 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T06:30:29.336Z,1538980229.336 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T06:30:29.336Z,1538980229.336 [Default:CheckIn:C.Wait] Stopped
2018-10-08T06:30:29.341Z,1538980229.341 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T06:30:29.341Z,1538980229.341 [Default:CheckIn:D] Running Loop=1
2018-10-08T06:30:29.736Z,1538980229.736 [Default:CheckIn:D] Stopped
2018-10-08T06:30:29.736Z,1538980229.736 [Default:CheckIn:E] Running Loop=1
2018-10-08T06:30:30.150Z,1538980230.150 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.430774 min 
2018-10-08T06:30:30.151Z,1538980230.151 [Default:CheckIn:E] Stopped
2018-10-08T06:30:30.151Z,1538980230.151 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T06:30:30.151Z,1538980230.151 [Default:CheckIn] Stopped
2018-10-08T06:30:30.151Z,1538980230.151 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T06:30:30.151Z,1538980230.151 [Default:CheckIn](INFO): Running loop #7
2018-10-08T06:30:30.151Z,1538980230.151 [Default:CheckIn] Running Loop=7
2018-10-08T06:30:30.152Z,1538980230.152 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T06:30:30.152Z,1538980230.152 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T06:30:34.343Z,1538980234.343 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T06:30:34.343Z,1538980234.343 [NAL9602] Data Fault, FailCount= 1
2018-10-08T06:30:34.343Z,1538980234.343 [NAL9602](ERROR): Data Fault
2018-10-08T06:30:34.519Z,1538980234.519 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T06:30:34.735Z,1538980234.735 [NAL9602](INFO): Powering down
2018-10-08T06:30:35.598Z,1538980235.598 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T06:30:35.598Z,1538980235.598 [NAL9602] No Fault, FailCount= 1
2018-10-08T06:31:05.131Z,1538980265.131 [NAL9602](INFO): Powering up NAL9602
2018-10-08T06:31:16.331Z,1538980276.331 [NAL9602](INFO): NAL9602 initialized
2018-10-08T06:35:30.330Z,1538980530.330 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T06:30:30.2Z
2018-10-08T06:35:30.330Z,1538980530.330 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T06:35:30.330Z,1538980530.330 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T06:35:35.108Z,1538980535.108 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0022.lzma
2018-10-08T06:35:35.900Z,1538980535.900 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0022.lzma.bak
2018-10-08T06:35:35.901Z,1538980535.901 [DataOverHttps](INFO): SBD MOMSN=8613576
2018-10-08T06:35:45.663Z,1538980545.663 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20181008T052431/Express0023.lzma
2018-10-08T06:35:46.456Z,1538980546.456 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0023.lzma.bak
2018-10-08T06:35:46.456Z,1538980546.456 [DataOverHttps](INFO): SBD MOMSN=8613578
2018-10-08T06:35:47.455Z,1538980547.455 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T06:35:47.455Z,1538980547.455 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T06:35:47.455Z,1538980547.455 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T06:40:05.047Z,1538980805.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:40:05.047Z,1538980805.047 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-08T06:40:05.487Z,1538980805.487 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:40:05.488Z,1538980805.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:40:05.488Z,1538980805.488 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:40:47.807Z,1538980847.807 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T06:40:47.807Z,1538980847.807 [Default:CheckIn:C.Wait] Stopped
2018-10-08T06:40:47.807Z,1538980847.807 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T06:40:47.807Z,1538980847.807 [Default:CheckIn:D] Running Loop=1
2018-10-08T06:40:48.229Z,1538980848.229 [Default:CheckIn:D] Stopped
2018-10-08T06:40:48.230Z,1538980848.230 [Default:CheckIn:E] Running Loop=1
2018-10-08T06:40:48.630Z,1538980848.630 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.738387 min 
2018-10-08T06:40:48.630Z,1538980848.630 [Default:CheckIn:E] Stopped
2018-10-08T06:40:48.630Z,1538980848.630 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T06:40:48.630Z,1538980848.630 [Default:CheckIn] Stopped
2018-10-08T06:40:48.630Z,1538980848.630 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T06:40:48.630Z,1538980848.630 [Default:CheckIn](INFO): Running loop #8
2018-10-08T06:40:48.631Z,1538980848.631 [Default:CheckIn] Running Loop=8
2018-10-08T06:40:48.631Z,1538980848.631 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T06:40:48.631Z,1538980848.631 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T06:41:18.759Z,1538980878.759 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T06:41:18.759Z,1538980878.759 [NAL9602] Data Fault, FailCount= 2
2018-10-08T06:41:18.759Z,1538980878.759 [NAL9602](ERROR): Data Fault
2018-10-08T06:41:18.860Z,1538980878.860 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T06:41:19.158Z,1538980879.158 [NAL9602](INFO): Powering down
2018-10-08T06:41:20.051Z,1538980880.051 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T06:41:20.052Z,1538980880.052 [NAL9602] No Fault, FailCount= 2
2018-10-08T06:41:49.163Z,1538980909.163 [NAL9602](INFO): Powering up NAL9602
2018-10-08T06:42:00.123Z,1538980920.123 [NAL9602](INFO): NAL9602 initialized
2018-10-08T06:43:05.737Z,1538980985.737 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:43:05.737Z,1538980985.737 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T06:43:05.737Z,1538980985.737 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:43:05.794Z,1538980985.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:43:06.197Z,1538980986.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:43:06.198Z,1538980986.198 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T06:43:06.580Z,1538980986.580 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:43:06.581Z,1538980986.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:43:06.581Z,1538980986.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:45:48.869Z,1538981148.869 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T06:40:48.6Z
2018-10-08T06:45:48.869Z,1538981148.869 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T06:45:48.869Z,1538981148.869 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T06:45:53.555Z,1538981153.555 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0025.lzma
2018-10-08T06:45:54.348Z,1538981154.348 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0025.lzma.bak
2018-10-08T06:45:54.349Z,1538981154.349 [DataOverHttps](INFO): SBD MOMSN=8613584
2018-10-08T06:46:03.933Z,1538981163.933 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20181008T052431/Express0026.lzma
2018-10-08T06:46:04.731Z,1538981164.731 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0026.lzma.bak
2018-10-08T06:46:04.732Z,1538981164.732 [DataOverHttps](INFO): SBD MOMSN=8613586
2018-10-08T06:46:05.741Z,1538981165.741 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T06:46:05.742Z,1538981165.742 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T06:46:05.742Z,1538981165.742 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T06:46:09.467Z,1538981169.467 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:46:09.468Z,1538981169.468 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-08T06:46:09.468Z,1538981169.468 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:46:09.497Z,1538981169.497 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:46:09.691Z,1538981169.691 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:46:09.691Z,1538981169.691 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-08T06:46:10.032Z,1538981170.032 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:46:10.032Z,1538981170.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:46:10.032Z,1538981170.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:49:10.073Z,1538981350.073 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:49:10.073Z,1538981350.073 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-08T06:49:10.074Z,1538981350.074 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:49:10.087Z,1538981350.087 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:49:10.268Z,1538981350.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:49:10.268Z,1538981350.268 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-08T06:49:10.663Z,1538981350.663 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:49:10.664Z,1538981350.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:49:10.664Z,1538981350.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:51:06.118Z,1538981466.118 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T06:51:06.118Z,1538981466.118 [Default:CheckIn:C.Wait] Stopped
2018-10-08T06:51:06.118Z,1538981466.118 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T06:51:06.118Z,1538981466.118 [Default:CheckIn:D] Running Loop=1
2018-10-08T06:51:06.564Z,1538981466.564 [Default:CheckIn:D] Stopped
2018-10-08T06:51:06.564Z,1538981466.564 [Default:CheckIn:E] Running Loop=1
2018-10-08T06:51:06.912Z,1538981466.912 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.044572 min 
2018-10-08T06:51:06.912Z,1538981466.912 [Default:CheckIn:E] Stopped
2018-10-08T06:51:06.913Z,1538981466.913 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T06:51:06.913Z,1538981466.913 [Default:CheckIn] Stopped
2018-10-08T06:51:06.913Z,1538981466.913 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T06:51:06.913Z,1538981466.913 [Default:CheckIn](INFO): Running loop #9
2018-10-08T06:51:06.913Z,1538981466.913 [Default:CheckIn] Running Loop=9
2018-10-08T06:51:06.914Z,1538981466.914 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T06:51:06.914Z,1538981466.914 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T06:52:01.683Z,1538981521.683 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T06:52:01.683Z,1538981521.683 [NAL9602] Data Fault, FailCount= 3
2018-10-08T06:52:01.683Z,1538981521.683 [NAL9602](ERROR): Data Fault
2018-10-08T06:52:01.759Z,1538981521.759 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T06:52:02.087Z,1538981522.087 [NAL9602](INFO): Powering down
2018-10-08T06:52:03.009Z,1538981523.009 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T06:52:03.009Z,1538981523.009 [NAL9602] No Fault, FailCount= 3
2018-10-08T06:52:10.709Z,1538981530.709 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:52:10.709Z,1538981530.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-08T06:52:10.709Z,1538981530.709 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:52:10.739Z,1538981530.739 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:52:11.166Z,1538981531.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:52:11.166Z,1538981531.166 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-08T06:52:11.510Z,1538981531.510 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:52:11.511Z,1538981531.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:52:11.511Z,1538981531.511 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:52:32.263Z,1538981552.263 [NAL9602](INFO): Powering up NAL9602
2018-10-08T06:52:43.061Z,1538981563.061 [NAL9602](INFO): NAL9602 initialized
2018-10-08T06:54:47.802Z,1538981687.802 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T06:54:47.802Z,1538981687.802 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T06:54:47.802Z,1538981687.802 [DropWeight](ERROR): Hardware Fault
2018-10-08T06:54:47.889Z,1538981687.889 [CBIT](INFO): Critical error at 20181008T065447
2018-10-08T06:54:47.891Z,1538981687.891 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T06:54:47.892Z,1538981687.892 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T06:54:48.271Z,1538981688.271 [CBIT](INFO): Critical error at 20181008T065447
2018-10-08T06:55:11.695Z,1538981711.695 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:55:11.696Z,1538981711.696 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-08T06:55:11.696Z,1538981711.696 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:55:11.709Z,1538981711.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:55:11.861Z,1538981711.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:55:11.861Z,1538981711.861 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-08T06:55:12.198Z,1538981712.198 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:55:12.199Z,1538981712.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:55:12.199Z,1538981712.199 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T06:56:07.042Z,1538981767.042 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T06:51:06.9Z
2018-10-08T06:56:07.043Z,1538981767.043 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T06:56:07.043Z,1538981767.043 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T06:56:11.714Z,1538981771.714 [DataOverHttps](INFO): Sending 104 bytes from file Logs/20181008T052431/Courier0028.lzma
2018-10-08T06:56:12.505Z,1538981772.505 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0028.lzma.bak
2018-10-08T06:56:12.505Z,1538981772.505 [DataOverHttps](INFO): SBD MOMSN=8613592
2018-10-08T06:56:22.801Z,1538981782.801 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T052431/Express0029.lzma
2018-10-08T06:56:23.595Z,1538981783.595 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0029.lzma.bak
2018-10-08T06:56:23.596Z,1538981783.596 [DataOverHttps](INFO): SBD MOMSN=8613594
2018-10-08T06:56:24.862Z,1538981784.862 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T06:56:24.862Z,1538981784.862 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T06:56:24.862Z,1538981784.862 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T06:57:33.570Z,1538981853.570 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T06:57:33.571Z,1538981853.571 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.572Z,1538981853.572 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T06:57:33.572Z,1538981853.572 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T06:57:33.573Z,1538981853.573 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T06:57:33.574Z,1538981853.574 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.575Z,1538981853.575 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.576Z,1538981853.576 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.577Z,1538981853.577 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.578Z,1538981853.578 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.578Z,1538981853.578 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.579Z,1538981853.579 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.580Z,1538981853.580 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T06:57:33.581Z,1538981853.581 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T06:57:33.582Z,1538981853.582 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T06:57:33.583Z,1538981853.583 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.584Z,1538981853.584 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T06:57:33.605Z,1538981853.605 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T06:57:33.606Z,1538981853.606 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T06:57:33.607Z,1538981853.607 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.607Z,1538981853.607 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T06:57:33.608Z,1538981853.608 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T06:57:33.621Z,1538981853.621 [BPC1](INFO): Calculating totals. Valid battery stick count: 36. Valid reserve battery stick count: 4.
2018-10-08T06:58:12.360Z,1538981892.360 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T06:58:12.360Z,1538981892.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-08T06:58:12.360Z,1538981892.360 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T06:58:12.390Z,1538981892.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T06:58:12.769Z,1538981892.769 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T06:58:12.769Z,1538981892.769 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-08T06:58:13.174Z,1538981893.174 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T06:58:13.175Z,1538981893.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T06:58:13.175Z,1538981893.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:01:13.554Z,1538982073.554 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:01:13.554Z,1538982073.554 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-08T07:01:13.555Z,1538982073.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:01:13.568Z,1538982073.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:01:13.976Z,1538982073.976 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:01:13.976Z,1538982073.976 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-08T07:01:14.361Z,1538982074.361 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:01:14.361Z,1538982074.361 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:01:14.362Z,1538982074.362 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:01:25.149Z,1538982085.149 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T07:01:25.149Z,1538982085.149 [Default:CheckIn:C.Wait] Stopped
2018-10-08T07:01:25.150Z,1538982085.150 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T07:01:25.150Z,1538982085.150 [Default:CheckIn:D] Running Loop=1
2018-10-08T07:01:25.555Z,1538982085.555 [Default:CheckIn:D] Stopped
2018-10-08T07:01:25.555Z,1538982085.555 [Default:CheckIn:E] Running Loop=1
2018-10-08T07:01:25.962Z,1538982085.962 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.361092 min 
2018-10-08T07:01:25.962Z,1538982085.962 [Default:CheckIn:E] Stopped
2018-10-08T07:01:25.962Z,1538982085.962 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T07:01:25.962Z,1538982085.962 [Default:CheckIn] Stopped
2018-10-08T07:01:25.962Z,1538982085.962 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T07:01:25.963Z,1538982085.963 [Default:CheckIn](INFO): Running loop #10
2018-10-08T07:01:25.963Z,1538982085.963 [Default:CheckIn] Running Loop=10
2018-10-08T07:01:25.963Z,1538982085.963 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T07:01:25.963Z,1538982085.963 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T07:02:44.034Z,1538982164.034 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T07:02:44.035Z,1538982164.035 [NAL9602] Data Fault, FailCount= 4
2018-10-08T07:02:44.035Z,1538982164.035 [NAL9602](ERROR): Data Fault
2018-10-08T07:02:44.135Z,1538982164.135 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T07:02:44.436Z,1538982164.436 [NAL9602](INFO): Powering down
2018-10-08T07:02:45.300Z,1538982165.300 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T07:02:45.300Z,1538982165.300 [NAL9602] No Fault, FailCount= 4
2018-10-08T07:03:14.443Z,1538982194.443 [NAL9602](INFO): Powering up NAL9602
2018-10-08T07:03:25.634Z,1538982205.634 [NAL9602](INFO): NAL9602 initialized
2018-10-08T07:04:14.677Z,1538982254.677 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:04:14.677Z,1538982254.677 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-08T07:04:14.677Z,1538982254.677 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:04:14.720Z,1538982254.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:04:15.037Z,1538982255.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:04:15.038Z,1538982255.038 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-08T07:04:15.427Z,1538982255.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:04:15.427Z,1538982255.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:04:15.428Z,1538982255.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:06:26.308Z,1538982386.308 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T07:01:25.0Z
2018-10-08T07:06:26.308Z,1538982386.308 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T07:06:26.308Z,1538982386.308 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T07:06:30.958Z,1538982390.958 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T052431/Courier0031.lzma
2018-10-08T07:06:31.739Z,1538982391.739 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0031.lzma.bak
2018-10-08T07:06:31.740Z,1538982391.740 [DataOverHttps](INFO): SBD MOMSN=8613600
2018-10-08T07:06:41.398Z,1538982401.398 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T052431/Express0032.lzma
2018-10-08T07:06:42.179Z,1538982402.179 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0032.lzma.bak
2018-10-08T07:06:42.180Z,1538982402.180 [DataOverHttps](INFO): SBD MOMSN=8613602
2018-10-08T07:06:43.172Z,1538982403.172 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T07:06:43.173Z,1538982403.173 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T07:06:43.173Z,1538982403.173 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T07:07:15.588Z,1538982435.588 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:07:15.588Z,1538982435.588 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-08T07:07:15.588Z,1538982435.588 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:07:15.627Z,1538982435.627 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:07:16.028Z,1538982436.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:07:16.028Z,1538982436.028 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-08T07:07:16.414Z,1538982436.414 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:07:16.414Z,1538982436.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:07:16.415Z,1538982436.415 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:09:48.017Z,1538982588.017 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T07:09:48.017Z,1538982588.017 [DropWeight] No Fault, FailCount= 1
2018-10-08T07:10:16.435Z,1538982616.435 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:10:16.435Z,1538982616.435 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-08T07:10:16.435Z,1538982616.435 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:10:16.504Z,1538982616.504 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:10:16.826Z,1538982616.826 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:10:16.826Z,1538982616.826 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-08T07:10:17.192Z,1538982617.192 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:10:17.193Z,1538982617.193 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:10:17.193Z,1538982617.193 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:11:43.347Z,1538982703.347 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T07:11:43.348Z,1538982703.348 [Default:CheckIn:C.Wait] Stopped
2018-10-08T07:11:43.348Z,1538982703.348 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T07:11:43.348Z,1538982703.348 [Default:CheckIn:D] Running Loop=1
2018-10-08T07:11:43.758Z,1538982703.758 [Default:CheckIn:D] Stopped
2018-10-08T07:11:43.758Z,1538982703.758 [Default:CheckIn:E] Running Loop=1
2018-10-08T07:11:44.163Z,1538982704.163 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.664469 min 
2018-10-08T07:11:44.163Z,1538982704.163 [Default:CheckIn:E] Stopped
2018-10-08T07:11:44.163Z,1538982704.163 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T07:11:44.163Z,1538982704.163 [Default:CheckIn] Stopped
2018-10-08T07:11:44.164Z,1538982704.164 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T07:11:44.164Z,1538982704.164 [Default:CheckIn](INFO): Running loop #11
2018-10-08T07:11:44.164Z,1538982704.164 [Default:CheckIn] Running Loop=11
2018-10-08T07:11:44.164Z,1538982704.164 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T07:11:44.164Z,1538982704.164 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T07:13:17.426Z,1538982797.426 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:13:17.426Z,1538982797.426 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-08T07:13:17.426Z,1538982797.426 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:13:17.439Z,1538982797.439 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:13:17.844Z,1538982797.844 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:13:17.844Z,1538982797.844 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-08T07:13:18.231Z,1538982798.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:13:18.232Z,1538982798.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:13:18.232Z,1538982798.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:13:28.959Z,1538982808.959 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T07:13:28.959Z,1538982808.959 [NAL9602] Data Fault, FailCount= 5
2018-10-08T07:13:28.959Z,1538982808.959 [NAL9602](ERROR): Data Fault
2018-10-08T07:13:29.044Z,1538982809.044 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T07:13:29.049Z,1538982809.049 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T07:13:29.358Z,1538982809.358 [NAL9602](INFO): Powering down
2018-10-08T07:13:29.428Z,1538982809.428 [CBIT](INFO): Critical error at 20181008T071329
2018-10-08T07:15:29.032Z,1538982929.032 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T07:15:29.032Z,1538982929.032 [NAL9602] No Fault, FailCount= 5
2018-10-08T07:15:29.290Z,1538982929.290 [NAL9602](INFO): Powering up NAL9602
2018-10-08T07:15:40.091Z,1538982940.091 [NAL9602](INFO): NAL9602 initialized
2018-10-08T07:16:18.474Z,1538982978.474 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:16:18.475Z,1538982978.475 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-08T07:16:18.475Z,1538982978.475 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:16:18.516Z,1538982978.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:16:18.873Z,1538982978.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:16:18.873Z,1538982978.873 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-08T07:16:19.244Z,1538982979.244 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:16:19.244Z,1538982979.244 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:16:19.245Z,1538982979.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:16:44.495Z,1538983004.495 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T07:11:44.2Z
2018-10-08T07:16:44.496Z,1538983004.496 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T07:16:44.496Z,1538983004.496 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T07:16:49.112Z,1538983009.112 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T052431/Courier0034.lzma
2018-10-08T07:16:49.903Z,1538983009.903 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0034.lzma.bak
2018-10-08T07:16:49.904Z,1538983009.904 [DataOverHttps](INFO): SBD MOMSN=8613608
2018-10-08T07:16:59.487Z,1538983019.487 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0035.lzma
2018-10-08T07:17:00.288Z,1538983020.288 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0035.lzma.bak
2018-10-08T07:17:00.288Z,1538983020.288 [DataOverHttps](INFO): SBD MOMSN=8613610
2018-10-08T07:17:01.287Z,1538983021.287 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T07:17:01.287Z,1538983021.287 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T07:17:01.288Z,1538983021.288 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T07:19:19.528Z,1538983159.528 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:19:19.528Z,1538983159.528 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-08T07:19:19.528Z,1538983159.528 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:19:19.541Z,1538983159.541 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:19:19.929Z,1538983159.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:19:19.929Z,1538983159.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-08T07:19:20.342Z,1538983160.342 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:19:20.343Z,1538983160.343 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:19:20.344Z,1538983160.344 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:22:01.477Z,1538983321.477 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T07:22:01.478Z,1538983321.478 [Default:CheckIn:C.Wait] Stopped
2018-10-08T07:22:01.478Z,1538983321.478 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T07:22:01.478Z,1538983321.478 [Default:CheckIn:D] Running Loop=1
2018-10-08T07:22:01.875Z,1538983321.875 [Default:CheckIn:D] Stopped
2018-10-08T07:22:01.875Z,1538983321.875 [Default:CheckIn:E] Running Loop=1
2018-10-08T07:22:02.275Z,1538983322.275 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.966423 min 
2018-10-08T07:22:02.275Z,1538983322.275 [Default:CheckIn:E] Stopped
2018-10-08T07:22:02.275Z,1538983322.275 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T07:22:02.275Z,1538983322.275 [Default:CheckIn] Stopped
2018-10-08T07:22:02.276Z,1538983322.276 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T07:22:02.276Z,1538983322.276 [Default:CheckIn](INFO): Running loop #12
2018-10-08T07:22:02.276Z,1538983322.276 [Default:CheckIn] Running Loop=12
2018-10-08T07:22:02.276Z,1538983322.276 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T07:22:02.276Z,1538983322.276 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T07:22:20.551Z,1538983340.551 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:22:20.551Z,1538983340.551 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-08T07:22:20.551Z,1538983340.551 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:22:20.592Z,1538983340.592 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:22:20.933Z,1538983340.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:22:20.933Z,1538983340.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-08T07:22:21.302Z,1538983341.302 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:22:21.303Z,1538983341.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:22:21.303Z,1538983341.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:25:21.604Z,1538983521.604 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:25:21.604Z,1538983521.604 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-08T07:25:21.604Z,1538983521.604 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:25:21.643Z,1538983521.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:25:22.034Z,1538983522.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:25:22.034Z,1538983522.034 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-08T07:25:22.431Z,1538983522.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:25:22.431Z,1538983522.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:25:22.432Z,1538983522.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:25:41.547Z,1538983541.547 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T07:25:41.547Z,1538983541.547 [NAL9602] Data Fault, FailCount= 1
2018-10-08T07:25:41.547Z,1538983541.547 [NAL9602](ERROR): Data Fault
2018-10-08T07:25:41.625Z,1538983541.625 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T07:25:41.946Z,1538983541.946 [NAL9602](INFO): Powering down
2018-10-08T07:25:42.849Z,1538983542.849 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T07:25:42.849Z,1538983542.849 [NAL9602] No Fault, FailCount= 1
2018-10-08T07:26:12.251Z,1538983572.251 [NAL9602](INFO): Powering up NAL9602
2018-10-08T07:26:23.055Z,1538983583.055 [NAL9602](INFO): NAL9602 initialized
2018-10-08T07:27:02.294Z,1538983622.294 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T07:22:02.3Z
2018-10-08T07:27:02.294Z,1538983622.294 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T07:27:02.294Z,1538983622.294 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T07:27:06.964Z,1538983626.964 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0037.lzma
2018-10-08T07:27:07.763Z,1538983627.763 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0037.lzma.bak
2018-10-08T07:27:07.764Z,1538983627.764 [DataOverHttps](INFO): SBD MOMSN=8613616
2018-10-08T07:27:17.379Z,1538983637.379 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0038.lzma
2018-10-08T07:27:18.148Z,1538983638.148 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0038.lzma.bak
2018-10-08T07:27:18.148Z,1538983638.148 [DataOverHttps](INFO): SBD MOMSN=8613618
2018-10-08T07:27:19.179Z,1538983639.179 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T07:27:19.179Z,1538983639.179 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T07:27:19.179Z,1538983639.179 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T07:28:23.256Z,1538983703.256 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:28:23.256Z,1538983703.256 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-08T07:28:23.257Z,1538983703.257 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:28:23.271Z,1538983703.271 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:28:23.428Z,1538983703.428 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:28:23.428Z,1538983703.428 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-08T07:28:23.725Z,1538983703.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:28:23.726Z,1538983703.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:28:23.726Z,1538983703.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:31:23.904Z,1538983883.904 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:31:23.904Z,1538983883.904 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-08T07:31:23.904Z,1538983883.904 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:31:23.969Z,1538983883.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:31:24.087Z,1538983884.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:31:24.087Z,1538983884.087 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-08T07:31:24.483Z,1538983884.483 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:31:24.484Z,1538983884.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:31:24.484Z,1538983884.484 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:32:19.626Z,1538983939.626 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T07:32:19.627Z,1538983939.627 [Default:CheckIn:C.Wait] Stopped
2018-10-08T07:32:19.627Z,1538983939.627 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T07:32:19.627Z,1538983939.627 [Default:CheckIn:D] Running Loop=1
2018-10-08T07:32:20.043Z,1538983940.043 [Default:CheckIn:D] Stopped
2018-10-08T07:32:20.043Z,1538983940.043 [Default:CheckIn:E] Running Loop=1
2018-10-08T07:32:20.452Z,1538983940.452 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.269214 min 
2018-10-08T07:32:20.452Z,1538983940.452 [Default:CheckIn:E] Stopped
2018-10-08T07:32:20.452Z,1538983940.452 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T07:32:20.452Z,1538983940.452 [Default:CheckIn] Stopped
2018-10-08T07:32:20.452Z,1538983940.452 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T07:32:20.458Z,1538983940.458 [Default:CheckIn](INFO): Running loop #13
2018-10-08T07:32:20.458Z,1538983940.458 [Default:CheckIn] Running Loop=13
2018-10-08T07:32:20.458Z,1538983940.458 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T07:32:20.458Z,1538983940.458 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T07:34:24.613Z,1538984064.613 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:34:24.613Z,1538984064.613 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-08T07:34:24.613Z,1538984064.613 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:34:24.626Z,1538984064.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:34:24.768Z,1538984064.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:34:24.768Z,1538984064.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-08T07:34:25.118Z,1538984065.118 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:34:25.118Z,1538984065.118 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:34:25.119Z,1538984065.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:36:00.219Z,1538984160.219 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.390888 seconds old.
2018-10-08T07:36:00.632Z,1538984160.632 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.804274 seconds old.
2018-10-08T07:36:01.081Z,1538984161.081 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.252618 seconds old.
2018-10-08T07:36:01.430Z,1538984161.430 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.602243 seconds old.
2018-10-08T07:36:01.832Z,1538984161.832 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.004626 seconds old.
2018-10-08T07:36:02.226Z,1538984162.226 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.398429 seconds old.
2018-10-08T07:36:02.616Z,1538984162.616 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.788591 seconds old.
2018-10-08T07:36:03.063Z,1538984163.063 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.234894 seconds old.
2018-10-08T07:36:03.411Z,1538984163.411 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.583846 seconds old.
2018-10-08T07:36:03.846Z,1538984163.846 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.017951 seconds old.
2018-10-08T07:36:04.234Z,1538984164.234 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.406802 seconds old.
2018-10-08T07:36:04.623Z,1538984164.623 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.795829 seconds old.
2018-10-08T07:36:05.024Z,1538984165.024 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.196806 seconds old.
2018-10-08T07:36:05.418Z,1538984165.418 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.590492 seconds old.
2018-10-08T07:36:05.821Z,1538984165.821 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.993662 seconds old.
2018-10-08T07:36:06.219Z,1538984166.219 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.390848 seconds old.
2018-10-08T07:36:25.202Z,1538984185.202 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T07:36:25.203Z,1538984185.203 [NAL9602] Data Fault, FailCount= 2
2018-10-08T07:36:25.203Z,1538984185.203 [NAL9602](ERROR): Data Fault
2018-10-08T07:36:25.303Z,1538984185.303 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T07:36:25.339Z,1538984185.339 [NAL9602](INFO): Powering down
2018-10-08T07:36:26.178Z,1538984186.178 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T07:36:26.178Z,1538984186.178 [NAL9602] No Fault, FailCount= 2
2018-10-08T07:36:55.719Z,1538984215.719 [NAL9602](INFO): Powering up NAL9602
2018-10-08T07:37:06.919Z,1538984226.919 [NAL9602](INFO): NAL9602 initialized
2018-10-08T07:37:20.624Z,1538984240.624 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T07:32:20.5Z
2018-10-08T07:37:20.624Z,1538984240.624 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T07:37:20.624Z,1538984240.624 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T07:37:25.203Z,1538984245.203 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:37:25.203Z,1538984245.203 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-08T07:37:25.203Z,1538984245.203 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:37:25.264Z,1538984245.264 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:37:25.287Z,1538984245.287 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0040.lzma
2018-10-08T07:37:25.395Z,1538984245.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:37:25.395Z,1538984245.395 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-08T07:37:25.749Z,1538984245.749 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:37:25.749Z,1538984245.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:37:25.750Z,1538984245.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:37:26.087Z,1538984246.087 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0040.lzma.bak
2018-10-08T07:37:26.088Z,1538984246.088 [DataOverHttps](INFO): SBD MOMSN=8613624
2018-10-08T07:37:35.796Z,1538984255.796 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0041.lzma
2018-10-08T07:37:36.600Z,1538984256.600 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0041.lzma.bak
2018-10-08T07:37:36.612Z,1538984256.612 [DataOverHttps](INFO): SBD MOMSN=8613626
2018-10-08T07:37:37.555Z,1538984257.555 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T07:37:37.555Z,1538984257.555 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T07:37:37.555Z,1538984257.555 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T07:39:49.410Z,1538984389.410 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T07:39:49.410Z,1538984389.410 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T07:39:49.410Z,1538984389.410 [DropWeight](ERROR): Hardware Fault
2018-10-08T07:39:49.501Z,1538984389.501 [CBIT](INFO): Critical error at 20181008T073949
2018-10-08T07:39:49.504Z,1538984389.504 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T07:39:49.504Z,1538984389.504 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T07:39:49.890Z,1538984389.890 [CBIT](INFO): Critical error at 20181008T073949
2018-10-08T07:40:25.874Z,1538984425.874 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:40:25.874Z,1538984425.874 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-08T07:40:25.874Z,1538984425.874 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:40:25.900Z,1538984425.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:40:25.901Z,1538984425.901 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:42:37.788Z,1538984557.788 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T07:42:37.788Z,1538984557.788 [Default:CheckIn:C.Wait] Stopped
2018-10-08T07:42:37.788Z,1538984557.788 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T07:42:37.788Z,1538984557.788 [Default:CheckIn:D] Running Loop=1
2018-10-08T07:42:38.182Z,1538984558.182 [Default:CheckIn:D] Stopped
2018-10-08T07:42:38.182Z,1538984558.182 [Default:CheckIn:E] Running Loop=1
2018-10-08T07:42:38.590Z,1538984558.590 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.571525 min 
2018-10-08T07:42:38.591Z,1538984558.591 [Default:CheckIn:E] Stopped
2018-10-08T07:42:38.591Z,1538984558.591 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T07:42:38.591Z,1538984558.591 [Default:CheckIn] Stopped
2018-10-08T07:42:38.591Z,1538984558.591 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T07:42:38.592Z,1538984558.592 [Default:CheckIn](INFO): Running loop #14
2018-10-08T07:42:38.592Z,1538984558.592 [Default:CheckIn] Running Loop=14
2018-10-08T07:42:38.592Z,1538984558.592 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T07:42:38.592Z,1538984558.592 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T07:47:10.250Z,1538984830.250 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T07:47:10.250Z,1538984830.250 [NAL9602] Data Fault, FailCount= 3
2018-10-08T07:47:10.250Z,1538984830.250 [NAL9602](ERROR): Data Fault
2018-10-08T07:47:10.323Z,1538984830.323 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T07:47:10.650Z,1538984830.650 [NAL9602](INFO): Powering down
2018-10-08T07:47:11.519Z,1538984831.519 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T07:47:11.519Z,1538984831.519 [NAL9602] No Fault, FailCount= 3
2018-10-08T07:47:38.722Z,1538984858.722 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T07:42:38.6Z
2018-10-08T07:47:38.722Z,1538984858.722 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T07:47:38.722Z,1538984858.722 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T07:47:43.276Z,1538984863.276 [NAL9602](INFO): Powering up NAL9602
2018-10-08T07:47:43.379Z,1538984863.379 [DataOverHttps](INFO): Sending 104 bytes from file Logs/20181008T052431/Courier0043.lzma
2018-10-08T07:47:44.168Z,1538984864.168 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0043.lzma.bak
2018-10-08T07:47:44.168Z,1538984864.168 [DataOverHttps](INFO): SBD MOMSN=8613632
2018-10-08T07:47:53.739Z,1538984873.739 [DataOverHttps](INFO): Sending 193 bytes from file Logs/20181008T052431/Express0044.lzma
2018-10-08T07:47:54.126Z,1538984874.126 [NAL9602](INFO): NAL9602 initialized
2018-10-08T07:47:54.524Z,1538984874.524 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0044.lzma.bak
2018-10-08T07:47:54.524Z,1538984874.524 [DataOverHttps](INFO): SBD MOMSN=8613634
2018-10-08T07:47:56.241Z,1538984876.241 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T07:47:56.241Z,1538984876.241 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T07:47:56.241Z,1538984876.241 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T07:52:56.528Z,1538985176.528 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T07:52:56.528Z,1538985176.528 [Default:CheckIn:C.Wait] Stopped
2018-10-08T07:52:56.528Z,1538985176.528 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T07:52:56.528Z,1538985176.528 [Default:CheckIn:D] Running Loop=1
2018-10-08T07:52:56.913Z,1538985176.913 [Default:CheckIn:D] Stopped
2018-10-08T07:52:56.913Z,1538985176.913 [Default:CheckIn:E] Running Loop=1
2018-10-08T07:52:57.318Z,1538985177.318 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.883708 min 
2018-10-08T07:52:57.318Z,1538985177.318 [Default:CheckIn:E] Stopped
2018-10-08T07:52:57.318Z,1538985177.318 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T07:52:57.319Z,1538985177.319 [Default:CheckIn] Stopped
2018-10-08T07:52:57.319Z,1538985177.319 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T07:52:57.319Z,1538985177.319 [Default:CheckIn](INFO): Running loop #15
2018-10-08T07:52:57.319Z,1538985177.319 [Default:CheckIn] Running Loop=15
2018-10-08T07:52:57.319Z,1538985177.319 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T07:52:57.319Z,1538985177.319 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T07:54:49.535Z,1538985289.535 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T07:54:49.535Z,1538985289.535 [DropWeight] No Fault, FailCount= 1
2018-10-08T07:55:26.115Z,1538985326.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:55:26.115Z,1538985326.115 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-08T07:55:26.539Z,1538985326.539 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:55:26.540Z,1538985326.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:55:26.540Z,1538985326.540 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:57:57.598Z,1538985477.598 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T07:57:57.599Z,1538985477.599 [NAL9602] Data Fault, FailCount= 4
2018-10-08T07:57:57.599Z,1538985477.599 [NAL9602](ERROR): Data Fault
2018-10-08T07:57:57.671Z,1538985477.671 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T07:52:57.3Z
2018-10-08T07:57:57.671Z,1538985477.671 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T07:57:57.671Z,1538985477.671 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T07:57:57.722Z,1538985477.722 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T07:57:57.998Z,1538985477.998 [NAL9602](INFO): Powering down
2018-10-08T07:57:59.259Z,1538985479.259 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T07:57:59.259Z,1538985479.259 [NAL9602] No Fault, FailCount= 4
2018-10-08T07:58:05.006Z,1538985485.006 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0046.lzma
2018-10-08T07:58:05.807Z,1538985485.807 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0046.lzma.bak
2018-10-08T07:58:05.808Z,1538985485.808 [DataOverHttps](INFO): SBD MOMSN=8613645
2018-10-08T07:58:15.446Z,1538985495.446 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0047.lzma
2018-10-08T07:58:16.243Z,1538985496.243 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0047.lzma.bak
2018-10-08T07:58:16.244Z,1538985496.244 [DataOverHttps](INFO): SBD MOMSN=8613647
2018-10-08T07:58:17.220Z,1538985497.220 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T07:58:17.220Z,1538985497.220 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T07:58:17.220Z,1538985497.220 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T07:58:26.715Z,1538985506.715 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T07:58:26.715Z,1538985506.715 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T07:58:26.715Z,1538985506.715 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T07:58:26.752Z,1538985506.752 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T07:58:27.160Z,1538985507.160 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T07:58:27.160Z,1538985507.160 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T07:58:27.517Z,1538985507.517 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T07:58:27.518Z,1538985507.518 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T07:58:27.518Z,1538985507.518 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T07:58:28.279Z,1538985508.279 [NAL9602](INFO): Powering up NAL9602
2018-10-08T07:58:39.483Z,1538985519.483 [NAL9602](INFO): NAL9602 initialized
2018-10-08T08:01:27.914Z,1538985687.914 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:01:27.914Z,1538985687.914 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-08T08:01:27.914Z,1538985687.914 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:01:27.956Z,1538985687.956 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:01:28.324Z,1538985688.324 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:01:28.324Z,1538985688.324 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-08T08:01:28.722Z,1538985688.722 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:01:28.723Z,1538985688.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:01:28.723Z,1538985688.723 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:03:17.715Z,1538985797.715 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T08:03:17.715Z,1538985797.715 [Default:CheckIn:C.Wait] Stopped
2018-10-08T08:03:17.715Z,1538985797.715 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T08:03:17.715Z,1538985797.715 [Default:CheckIn:D] Running Loop=1
2018-10-08T08:03:18.118Z,1538985798.118 [Default:CheckIn:D] Stopped
2018-10-08T08:03:18.118Z,1538985798.118 [Default:CheckIn:E] Running Loop=1
2018-10-08T08:03:18.516Z,1538985798.516 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 155.237142 min 
2018-10-08T08:03:18.516Z,1538985798.516 [Default:CheckIn:E] Stopped
2018-10-08T08:03:18.516Z,1538985798.516 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T08:03:18.516Z,1538985798.516 [Default:CheckIn] Stopped
2018-10-08T08:03:18.516Z,1538985798.516 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T08:03:18.517Z,1538985798.517 [Default:CheckIn](INFO): Running loop #16
2018-10-08T08:03:18.517Z,1538985798.517 [Default:CheckIn] Running Loop=16
2018-10-08T08:03:18.517Z,1538985798.517 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T08:03:18.517Z,1538985798.517 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T08:04:29.022Z,1538985869.022 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:04:29.023Z,1538985869.023 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-08T08:04:29.023Z,1538985869.023 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:04:29.082Z,1538985869.082 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:04:29.430Z,1538985869.430 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:04:29.430Z,1538985869.430 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-08T08:04:29.791Z,1538985869.791 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:04:29.792Z,1538985869.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:04:29.792Z,1538985869.792 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:07:06.258Z,1538986026.258 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.454859 seconds old.
2018-10-08T08:07:06.610Z,1538986026.610 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.806485 seconds old.
2018-10-08T08:07:07.027Z,1538986027.027 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.223298 seconds old.
2018-10-08T08:07:07.423Z,1538986027.423 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.619278 seconds old.
2018-10-08T08:07:07.795Z,1538986027.795 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.991982 seconds old.
2018-10-08T08:07:08.178Z,1538986028.178 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.374969 seconds old.
2018-10-08T08:07:08.610Z,1538986028.610 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.806260 seconds old.
2018-10-08T08:07:09.007Z,1538986029.007 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.203471 seconds old.
2018-10-08T08:07:09.404Z,1538986029.404 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.600770 seconds old.
2018-10-08T08:07:09.786Z,1538986029.786 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.982652 seconds old.
2018-10-08T08:07:10.211Z,1538986030.211 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.407495 seconds old.
2018-10-08T08:07:30.179Z,1538986050.179 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:07:30.179Z,1538986050.179 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-08T08:07:30.179Z,1538986050.179 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:07:30.213Z,1538986050.213 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:07:30.615Z,1538986050.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:07:30.615Z,1538986050.615 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-08T08:07:31.017Z,1538986051.017 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:07:31.018Z,1538986051.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:07:31.018Z,1538986051.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:08:18.688Z,1538986098.688 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:03:18.5Z
2018-10-08T08:08:18.688Z,1538986098.688 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T08:08:18.688Z,1538986098.688 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T08:08:23.043Z,1538986103.043 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0049.lzma
2018-10-08T08:08:23.840Z,1538986103.840 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0049.lzma.bak
2018-10-08T08:08:23.840Z,1538986103.840 [DataOverHttps](INFO): SBD MOMSN=8613653
2018-10-08T08:08:33.552Z,1538986113.552 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181008T052431/Express0050.lzma
2018-10-08T08:08:34.347Z,1538986114.347 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0050.lzma.bak
2018-10-08T08:08:34.347Z,1538986114.347 [DataOverHttps](INFO): SBD MOMSN=8613655
2018-10-08T08:08:35.337Z,1538986115.337 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T08:08:35.337Z,1538986115.337 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T08:08:35.338Z,1538986115.338 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T08:08:41.727Z,1538986121.727 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T08:08:41.727Z,1538986121.727 [NAL9602] Data Fault, FailCount= 5
2018-10-08T08:08:41.727Z,1538986121.727 [NAL9602](ERROR): Data Fault
2018-10-08T08:08:41.897Z,1538986121.897 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T08:08:41.898Z,1538986121.898 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T08:08:42.122Z,1538986122.122 [NAL9602](INFO): Powering down
2018-10-08T08:08:42.233Z,1538986122.233 [CBIT](INFO): Critical error at 20181008T080841
2018-10-08T08:10:31.330Z,1538986231.330 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:10:31.331Z,1538986231.331 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-08T08:10:31.331Z,1538986231.331 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:10:31.344Z,1538986231.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:10:31.761Z,1538986231.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:10:31.762Z,1538986231.762 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-08T08:10:32.132Z,1538986232.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:10:32.133Z,1538986232.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:10:32.133Z,1538986232.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:10:42.052Z,1538986242.052 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T08:10:42.052Z,1538986242.052 [NAL9602] No Fault, FailCount= 5
2018-10-08T08:10:42.402Z,1538986242.402 [NAL9602](INFO): Powering up NAL9602
2018-10-08T08:10:53.595Z,1538986253.595 [NAL9602](INFO): NAL9602 initialized
2018-10-08T08:13:32.472Z,1538986412.472 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:13:32.472Z,1538986412.472 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-08T08:13:32.472Z,1538986412.472 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:13:32.523Z,1538986412.523 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:13:32.873Z,1538986412.873 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:13:32.873Z,1538986412.873 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-08T08:13:33.236Z,1538986413.236 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:13:33.237Z,1538986413.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:13:33.237Z,1538986413.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:13:35.203Z,1538986415.203 [NAL9602](ERROR): parseGSV uart error: serial timeout
2018-10-08T08:13:35.658Z,1538986415.658 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T08:13:35.658Z,1538986415.658 [Default:CheckIn:C.Wait] Stopped
2018-10-08T08:13:35.658Z,1538986415.658 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T08:13:35.659Z,1538986415.659 [Default:CheckIn:D] Running Loop=1
2018-10-08T08:13:36.066Z,1538986416.066 [Default:CheckIn:D] Stopped
2018-10-08T08:13:36.066Z,1538986416.066 [Default:CheckIn:E] Running Loop=1
2018-10-08T08:13:36.451Z,1538986416.451 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.536263 min 
2018-10-08T08:13:36.451Z,1538986416.451 [Default:CheckIn:E] Stopped
2018-10-08T08:13:36.452Z,1538986416.452 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T08:13:36.452Z,1538986416.452 [Default:CheckIn] Stopped
2018-10-08T08:13:36.452Z,1538986416.452 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T08:13:36.452Z,1538986416.452 [Default:CheckIn](INFO): Running loop #17
2018-10-08T08:13:36.452Z,1538986416.452 [Default:CheckIn] Running Loop=17
2018-10-08T08:13:36.452Z,1538986416.452 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T08:13:36.452Z,1538986416.452 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T08:14:06.717Z,1538986446.717 [NAL9602](ERROR): getFix uart error: serial timeout
2018-10-08T08:14:40.126Z,1538986480.126 [NAL9602](ERROR): parseGSV uart error: serial timeout
2018-10-08T08:15:11.549Z,1538986511.549 [NAL9602](ERROR): getFix uart error: serial timeout
2018-10-08T08:15:41.875Z,1538986541.875 [NAL9602](ERROR): parseGSV uart error: serial timeout
2018-10-08T08:16:13.585Z,1538986573.585 [NAL9602](ERROR): getFix uart error: serial timeout
2018-10-08T08:16:33.340Z,1538986593.340 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:16:33.340Z,1538986593.340 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-08T08:16:33.340Z,1538986593.340 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:16:33.383Z,1538986593.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:16:33.793Z,1538986593.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:16:33.793Z,1538986593.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-08T08:16:34.138Z,1538986594.138 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:16:34.139Z,1538986594.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:16:34.139Z,1538986594.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:16:43.935Z,1538986603.935 [NAL9602](ERROR): parseGSV uart error: serial timeout
2018-10-08T08:17:15.645Z,1538986635.645 [NAL9602](ERROR): getFix uart error: serial timeout
2018-10-08T08:17:45.987Z,1538986665.987 [NAL9602](ERROR): parseGSV uart error: serial timeout
2018-10-08T08:18:17.693Z,1538986697.693 [NAL9602](ERROR): getFix uart error: serial timeout
2018-10-08T08:18:36.654Z,1538986716.654 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:13:36.5Z
2018-10-08T08:18:36.654Z,1538986716.654 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T08:18:36.654Z,1538986716.654 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T08:18:40.768Z,1538986720.768 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T052431/Courier0052.lzma
2018-10-08T08:18:41.544Z,1538986721.544 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0052.lzma.bak
2018-10-08T08:18:41.544Z,1538986721.544 [DataOverHttps](INFO): SBD MOMSN=8613661
2018-10-08T08:18:51.075Z,1538986731.075 [NAL9602](ERROR): parseGSV uart error: serial timeout
2018-10-08T08:18:51.174Z,1538986731.174 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0053.lzma
2018-10-08T08:18:51.960Z,1538986731.960 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0053.lzma.bak
2018-10-08T08:18:51.960Z,1538986731.960 [DataOverHttps](INFO): SBD MOMSN=8613663
2018-10-08T08:18:53.154Z,1538986733.154 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T08:18:53.154Z,1538986733.154 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T08:18:53.154Z,1538986733.154 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T08:19:22.261Z,1538986762.261 [NAL9602](ERROR): getFix uart error: serial timeout
2018-10-08T08:19:22.390Z,1538986762.390 [BPC1](ERROR): BPC1B failed to parse battery data due to unrecognized msg size.
2018-10-08T08:19:34.621Z,1538986774.621 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:19:34.621Z,1538986774.621 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-08T08:19:34.621Z,1538986774.621 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:19:34.673Z,1538986774.673 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:19:34.919Z,1538986774.919 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:19:34.920Z,1538986774.920 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-08T08:19:35.310Z,1538986775.310 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:19:35.311Z,1538986775.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:19:35.311Z,1538986775.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:19:52.843Z,1538986792.843 [NAL9602](ERROR): parseGSV uart error: serial timeout
2018-10-08T08:20:24.485Z,1538986824.485 [NAL9602](ERROR): getFix uart error: serial timeout
2018-10-08T08:20:57.210Z,1538986857.210 [NAL9602](ERROR): parseGSV uart error: serial timeout
2018-10-08T08:20:57.711Z,1538986857.711 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T08:20:57.711Z,1538986857.711 [NAL9602] Data Fault, FailCount= 1
2018-10-08T08:20:57.711Z,1538986857.711 [NAL9602](ERROR): Data Fault
2018-10-08T08:20:57.807Z,1538986857.807 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T08:20:58.116Z,1538986858.116 [NAL9602](INFO): Powering down
2018-10-08T08:20:59.005Z,1538986859.005 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T08:20:59.005Z,1538986859.005 [NAL9602] No Fault, FailCount= 1
2018-10-08T08:21:28.509Z,1538986888.509 [NAL9602](INFO): Powering up NAL9602
2018-10-08T08:21:39.711Z,1538986899.711 [NAL9602](INFO): NAL9602 initialized
2018-10-08T08:22:35.658Z,1538986955.658 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:22:35.658Z,1538986955.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-08T08:22:35.658Z,1538986955.658 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:22:35.672Z,1538986955.672 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:22:36.059Z,1538986956.059 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:22:36.059Z,1538986956.059 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-08T08:22:36.591Z,1538986956.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:22:36.592Z,1538986956.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:22:36.592Z,1538986956.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:23:53.674Z,1538987033.674 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T08:23:53.674Z,1538987033.674 [Default:CheckIn:C.Wait] Stopped
2018-10-08T08:23:53.674Z,1538987033.674 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T08:23:53.674Z,1538987033.674 [Default:CheckIn:D] Running Loop=1
2018-10-08T08:23:54.088Z,1538987034.088 [Default:CheckIn:D] Stopped
2018-10-08T08:23:54.088Z,1538987034.088 [Default:CheckIn:E] Running Loop=1
2018-10-08T08:23:54.526Z,1538987034.526 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.836637 min 
2018-10-08T08:23:54.526Z,1538987034.526 [Default:CheckIn:E] Stopped
2018-10-08T08:23:54.526Z,1538987034.526 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T08:23:54.526Z,1538987034.526 [Default:CheckIn] Stopped
2018-10-08T08:23:54.527Z,1538987034.527 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T08:23:54.527Z,1538987034.527 [Default:CheckIn](INFO): Running loop #18
2018-10-08T08:23:54.527Z,1538987034.527 [Default:CheckIn] Running Loop=18
2018-10-08T08:23:54.527Z,1538987034.527 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T08:23:54.527Z,1538987034.527 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T08:24:51.006Z,1538987091.006 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T08:24:51.006Z,1538987091.006 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T08:24:51.006Z,1538987091.006 [DropWeight](ERROR): Hardware Fault
2018-10-08T08:24:51.091Z,1538987091.091 [CBIT](INFO): Critical error at 20181008T082451
2018-10-08T08:24:51.098Z,1538987091.098 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T08:24:51.098Z,1538987091.098 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T08:24:51.485Z,1538987091.485 [CBIT](INFO): Critical error at 20181008T082451
2018-10-08T08:25:36.922Z,1538987136.922 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:25:36.922Z,1538987136.922 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-08T08:25:36.922Z,1538987136.922 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:25:36.973Z,1538987136.973 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:25:37.319Z,1538987137.319 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:25:37.319Z,1538987137.319 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-08T08:25:37.682Z,1538987137.682 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:25:37.683Z,1538987137.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:25:37.683Z,1538987137.683 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:28:34.664Z,1538987314.664 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T08:28:34.665Z,1538987314.665 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.666Z,1538987314.666 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T08:28:34.667Z,1538987314.667 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T08:28:34.668Z,1538987314.668 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T08:28:34.677Z,1538987314.677 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.678Z,1538987314.678 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.679Z,1538987314.679 [BPC1](FAULT): Battery stick #25 (s/n: 00E8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.679Z,1538987314.679 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.680Z,1538987314.680 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.685Z,1538987314.685 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.686Z,1538987314.686 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.687Z,1538987314.687 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.688Z,1538987314.688 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T08:28:34.693Z,1538987314.693 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T08:28:34.694Z,1538987314.694 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T08:28:34.695Z,1538987314.695 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.696Z,1538987314.696 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T08:28:34.701Z,1538987314.701 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T08:28:34.702Z,1538987314.702 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T08:28:34.703Z,1538987314.703 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.704Z,1538987314.704 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T08:28:34.704Z,1538987314.704 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T08:28:34.705Z,1538987314.705 [BPC1](INFO): Calculating totals. Valid battery stick count: 35. Valid reserve battery stick count: 4.
2018-10-08T08:28:37.878Z,1538987317.878 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:28:37.878Z,1538987317.878 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-08T08:28:37.878Z,1538987317.878 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:28:37.904Z,1538987317.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:28:38.314Z,1538987318.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:28:38.314Z,1538987318.314 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-08T08:28:38.680Z,1538987318.680 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:28:38.680Z,1538987318.680 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:28:38.681Z,1538987318.681 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:28:54.663Z,1538987334.663 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:23:54.5Z
2018-10-08T08:28:54.663Z,1538987334.663 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T08:28:54.663Z,1538987334.663 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T08:28:58.859Z,1538987338.859 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20181008T052431/Courier0055.lzma
2018-10-08T08:28:59.636Z,1538987339.636 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0055.lzma.bak
2018-10-08T08:28:59.636Z,1538987339.636 [DataOverHttps](INFO): SBD MOMSN=8613669
2018-10-08T08:29:09.181Z,1538987349.181 [DataOverHttps](INFO): Sending 224 bytes from file Logs/20181008T052431/Express0056.lzma
2018-10-08T08:29:09.948Z,1538987349.948 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0056.lzma.bak
2018-10-08T08:29:09.948Z,1538987349.948 [DataOverHttps](INFO): SBD MOMSN=8613671
2018-10-08T08:29:11.090Z,1538987351.090 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T08:29:11.090Z,1538987351.090 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T08:29:11.090Z,1538987351.090 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T08:31:39.084Z,1538987499.084 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:31:39.084Z,1538987499.084 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-08T08:31:39.084Z,1538987499.084 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:31:39.098Z,1538987499.098 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:31:39.511Z,1538987499.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:31:39.511Z,1538987499.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-08T08:31:39.887Z,1538987499.887 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:31:39.888Z,1538987499.888 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:31:39.888Z,1538987499.888 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:31:41.830Z,1538987501.830 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T08:31:41.830Z,1538987501.830 [NAL9602] Data Fault, FailCount= 2
2018-10-08T08:31:41.830Z,1538987501.830 [NAL9602](ERROR): Data Fault
2018-10-08T08:31:41.918Z,1538987501.918 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T08:31:42.230Z,1538987502.230 [NAL9602](INFO): Powering down
2018-10-08T08:31:43.105Z,1538987503.105 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T08:31:43.105Z,1538987503.105 [NAL9602] No Fault, FailCount= 2
2018-10-08T08:32:12.234Z,1538987532.234 [NAL9602](INFO): Powering up NAL9602
2018-10-08T08:32:23.202Z,1538987543.202 [NAL9602](INFO): NAL9602 initialized
2018-10-08T08:34:11.623Z,1538987651.623 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T08:34:11.624Z,1538987651.624 [Default:CheckIn:C.Wait] Stopped
2018-10-08T08:34:11.624Z,1538987651.624 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T08:34:11.624Z,1538987651.624 [Default:CheckIn:D] Running Loop=1
2018-10-08T08:34:12.019Z,1538987652.019 [Default:CheckIn:D] Stopped
2018-10-08T08:34:12.019Z,1538987652.019 [Default:CheckIn:E] Running Loop=1
2018-10-08T08:34:12.461Z,1538987652.461 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 186.135482 min 
2018-10-08T08:34:12.462Z,1538987652.462 [Default:CheckIn:E] Stopped
2018-10-08T08:34:12.463Z,1538987652.463 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T08:34:12.463Z,1538987652.463 [Default:CheckIn] Stopped
2018-10-08T08:34:12.463Z,1538987652.463 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T08:34:12.464Z,1538987652.464 [Default:CheckIn](INFO): Running loop #19
2018-10-08T08:34:12.464Z,1538987652.464 [Default:CheckIn] Running Loop=19
2018-10-08T08:34:12.464Z,1538987652.464 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T08:34:12.464Z,1538987652.464 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T08:34:40.195Z,1538987680.195 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:34:40.196Z,1538987680.196 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-08T08:34:40.196Z,1538987680.196 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:34:40.221Z,1538987680.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:34:40.617Z,1538987680.617 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:34:40.618Z,1538987680.618 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-08T08:34:40.986Z,1538987680.986 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:34:40.987Z,1538987680.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:34:40.987Z,1538987680.987 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:37:40.992Z,1538987860.992 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:37:40.992Z,1538987860.992 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-08T08:37:40.992Z,1538987860.992 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:37:41.006Z,1538987861.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:37:41.408Z,1538987861.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:37:41.413Z,1538987861.413 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-08T08:37:41.775Z,1538987861.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:37:41.775Z,1538987861.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:37:41.775Z,1538987861.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:39:12.532Z,1538987952.532 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:34:12.5Z
2018-10-08T08:39:12.532Z,1538987952.532 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T08:39:12.532Z,1538987952.532 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T08:39:17.219Z,1538987957.219 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0058.lzma
2018-10-08T08:39:18.011Z,1538987958.011 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0058.lzma.bak
2018-10-08T08:39:18.012Z,1538987958.012 [DataOverHttps](INFO): SBD MOMSN=8613677
2018-10-08T08:39:27.627Z,1538987967.627 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0059.lzma
2018-10-08T08:39:28.412Z,1538987968.412 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0059.lzma.bak
2018-10-08T08:39:28.412Z,1538987968.412 [DataOverHttps](INFO): SBD MOMSN=8613679
2018-10-08T08:39:29.514Z,1538987969.514 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T08:39:29.514Z,1538987969.514 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T08:39:29.515Z,1538987969.515 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T08:39:51.159Z,1538987991.159 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T08:39:51.159Z,1538987991.159 [DropWeight] No Fault, FailCount= 1
2018-10-08T08:40:42.086Z,1538988042.086 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:40:42.086Z,1538988042.086 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-08T08:40:42.086Z,1538988042.086 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:40:42.112Z,1538988042.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:40:42.521Z,1538988042.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:40:42.521Z,1538988042.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-08T08:40:42.894Z,1538988042.894 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:40:42.895Z,1538988042.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:40:42.895Z,1538988042.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:42:24.203Z,1538988144.203 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T08:42:24.203Z,1538988144.203 [NAL9602] Data Fault, FailCount= 3
2018-10-08T08:42:24.203Z,1538988144.203 [NAL9602](ERROR): Data Fault
2018-10-08T08:42:24.341Z,1538988144.341 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T08:42:24.602Z,1538988144.602 [NAL9602](INFO): Powering down
2018-10-08T08:42:25.485Z,1538988145.485 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T08:42:25.485Z,1538988145.485 [NAL9602] No Fault, FailCount= 3
2018-10-08T08:42:54.794Z,1538988174.794 [NAL9602](INFO): Powering up NAL9602
2018-10-08T08:43:05.995Z,1538988185.995 [NAL9602](INFO): NAL9602 initialized
2018-10-08T08:43:43.063Z,1538988223.063 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:43:43.063Z,1538988223.063 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-08T08:43:43.063Z,1538988223.063 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:43:43.093Z,1538988223.093 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:43:43.472Z,1538988223.472 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:43:43.472Z,1538988223.472 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-08T08:43:43.848Z,1538988223.848 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:43:43.848Z,1538988223.848 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:43:43.849Z,1538988223.849 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:44:29.839Z,1538988269.839 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T08:44:29.839Z,1538988269.839 [Default:CheckIn:C.Wait] Stopped
2018-10-08T08:44:29.839Z,1538988269.839 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T08:44:29.839Z,1538988269.839 [Default:CheckIn:D] Running Loop=1
2018-10-08T08:44:30.285Z,1538988270.285 [Default:CheckIn:D] Stopped
2018-10-08T08:44:30.285Z,1538988270.285 [Default:CheckIn:E] Running Loop=1
2018-10-08T08:44:30.656Z,1538988270.656 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.439909 min 
2018-10-08T08:44:30.656Z,1538988270.656 [Default:CheckIn:E] Stopped
2018-10-08T08:44:30.656Z,1538988270.656 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T08:44:30.656Z,1538988270.656 [Default:CheckIn] Stopped
2018-10-08T08:44:30.657Z,1538988270.657 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T08:44:30.657Z,1538988270.657 [Default:CheckIn](INFO): Running loop #20
2018-10-08T08:44:30.657Z,1538988270.657 [Default:CheckIn] Running Loop=20
2018-10-08T08:44:30.657Z,1538988270.657 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T08:44:30.657Z,1538988270.657 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T08:46:44.171Z,1538988404.171 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:46:44.171Z,1538988404.171 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-08T08:46:44.171Z,1538988404.171 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:46:44.184Z,1538988404.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:46:44.587Z,1538988404.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:46:44.588Z,1538988404.588 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-08T08:46:44.996Z,1538988404.996 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:46:44.998Z,1538988404.998 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:46:44.999Z,1538988404.999 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:49:30.780Z,1538988570.780 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:44:30.7Z
2018-10-08T08:49:30.780Z,1538988570.780 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T08:49:30.780Z,1538988570.780 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T08:49:35.462Z,1538988575.462 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0061.lzma
2018-10-08T08:49:36.265Z,1538988576.265 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0061.lzma.bak
2018-10-08T08:49:36.265Z,1538988576.265 [DataOverHttps](INFO): SBD MOMSN=8613685
2018-10-08T08:49:45.768Z,1538988585.768 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:49:45.768Z,1538988585.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-08T08:49:45.769Z,1538988585.769 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:49:45.782Z,1538988585.782 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:49:45.807Z,1538988585.807 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0062.lzma
2018-10-08T08:49:45.920Z,1538988585.920 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:49:45.925Z,1538988585.925 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-08T08:49:46.234Z,1538988586.234 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:49:46.235Z,1538988586.235 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:49:46.235Z,1538988586.235 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:49:46.592Z,1538988586.592 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0062.lzma.bak
2018-10-08T08:49:46.592Z,1538988586.592 [DataOverHttps](INFO): SBD MOMSN=8613687
2018-10-08T08:49:47.599Z,1538988587.599 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T08:49:47.599Z,1538988587.599 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T08:49:47.599Z,1538988587.599 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T08:52:46.496Z,1538988766.496 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:52:46.496Z,1538988766.496 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-08T08:52:46.496Z,1538988766.496 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:52:46.551Z,1538988766.551 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:52:46.980Z,1538988766.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T08:52:46.985Z,1538988766.985 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-08T08:52:47.287Z,1538988767.287 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T08:52:47.288Z,1538988767.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T08:52:47.288Z,1538988767.288 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T08:53:08.319Z,1538988788.319 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T08:53:08.319Z,1538988788.319 [NAL9602] Data Fault, FailCount= 4
2018-10-08T08:53:08.319Z,1538988788.319 [NAL9602](ERROR): Data Fault
2018-10-08T08:53:08.451Z,1538988788.451 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T08:53:08.714Z,1538988788.714 [NAL9602](INFO): Powering down
2018-10-08T08:53:09.582Z,1538988789.582 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T08:53:09.582Z,1538988789.582 [NAL9602] No Fault, FailCount= 4
2018-10-08T08:53:39.115Z,1538988819.115 [NAL9602](INFO): Powering up NAL9602
2018-10-08T08:53:52.487Z,1538988832.487 [NAL9602](INFO): NAL9602 initialized
2018-10-08T08:54:48.121Z,1538988888.121 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T08:54:48.121Z,1538988888.121 [Default:CheckIn:C.Wait] Stopped
2018-10-08T08:54:48.121Z,1538988888.121 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T08:54:48.121Z,1538988888.121 [Default:CheckIn:D] Running Loop=1
2018-10-08T08:54:48.566Z,1538988888.566 [Default:CheckIn:D] Stopped
2018-10-08T08:54:48.566Z,1538988888.566 [Default:CheckIn:E] Running Loop=1
2018-10-08T08:54:48.923Z,1538988888.923 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.744613 min 
2018-10-08T08:54:48.924Z,1538988888.924 [Default:CheckIn:E] Stopped
2018-10-08T08:54:48.924Z,1538988888.924 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T08:54:48.924Z,1538988888.924 [Default:CheckIn] Stopped
2018-10-08T08:54:48.924Z,1538988888.924 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T08:54:48.924Z,1538988888.924 [Default:CheckIn](INFO): Running loop #21
2018-10-08T08:54:48.924Z,1538988888.924 [Default:CheckIn] Running Loop=21
2018-10-08T08:54:48.925Z,1538988888.925 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T08:54:48.925Z,1538988888.925 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T08:55:47.484Z,1538988947.484 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T08:55:47.484Z,1538988947.484 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-08T08:55:47.484Z,1538988947.484 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T08:55:47.530Z,1538988947.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:55:47.530Z,1538988947.530 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T08:59:49.014Z,1538989189.014 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T08:54:48.9Z
2018-10-08T08:59:49.014Z,1538989189.014 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T08:59:49.014Z,1538989189.014 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T08:59:53.565Z,1538989193.565 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0064.lzma
2018-10-08T08:59:54.337Z,1538989194.337 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0064.lzma.bak
2018-10-08T08:59:54.337Z,1538989194.337 [DataOverHttps](INFO): SBD MOMSN=8613693
2018-10-08T09:00:03.933Z,1538989203.933 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20181008T052431/Express0065.lzma
2018-10-08T09:00:04.720Z,1538989204.720 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0065.lzma.bak
2018-10-08T09:00:04.720Z,1538989204.720 [DataOverHttps](INFO): SBD MOMSN=8613695
2018-10-08T09:00:05.699Z,1538989205.699 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T09:00:05.699Z,1538989205.699 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T09:00:05.699Z,1538989205.699 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T09:03:54.396Z,1538989434.396 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T09:03:54.396Z,1538989434.396 [NAL9602] Data Fault, FailCount= 5
2018-10-08T09:03:54.396Z,1538989434.396 [NAL9602](ERROR): Data Fault
2018-10-08T09:03:54.552Z,1538989434.552 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T09:03:54.557Z,1538989434.557 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T09:03:54.790Z,1538989434.790 [NAL9602](INFO): Powering down
2018-10-08T09:03:54.867Z,1538989434.867 [CBIT](INFO): Critical error at 20181008T090354
2018-10-08T09:05:06.189Z,1538989506.189 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T09:05:06.189Z,1538989506.189 [Default:CheckIn:C.Wait] Stopped
2018-10-08T09:05:06.189Z,1538989506.189 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T09:05:06.189Z,1538989506.189 [Default:CheckIn:D] Running Loop=1
2018-10-08T09:05:06.609Z,1538989506.609 [Default:CheckIn:D] Stopped
2018-10-08T09:05:06.609Z,1538989506.609 [Default:CheckIn:E] Running Loop=1
2018-10-08T09:05:07.013Z,1538989507.013 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 217.045312 min 
2018-10-08T09:05:07.013Z,1538989507.013 [Default:CheckIn:E] Stopped
2018-10-08T09:05:07.013Z,1538989507.013 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T09:05:07.013Z,1538989507.013 [Default:CheckIn] Stopped
2018-10-08T09:05:07.014Z,1538989507.014 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T09:05:07.014Z,1538989507.014 [Default:CheckIn](INFO): Running loop #22
2018-10-08T09:05:07.014Z,1538989507.014 [Default:CheckIn] Running Loop=22
2018-10-08T09:05:07.014Z,1538989507.014 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T09:05:07.014Z,1538989507.014 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T09:05:54.424Z,1538989554.424 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T09:05:54.425Z,1538989554.425 [NAL9602] No Fault, FailCount= 5
2018-10-08T09:05:54.719Z,1538989554.719 [NAL9602](INFO): Powering up NAL9602
2018-10-08T09:06:05.922Z,1538989565.922 [NAL9602](INFO): NAL9602 initialized
2018-10-08T09:09:52.606Z,1538989792.606 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T09:09:52.606Z,1538989792.606 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T09:09:52.606Z,1538989792.606 [DropWeight](ERROR): Hardware Fault
2018-10-08T09:09:52.689Z,1538989792.689 [CBIT](INFO): Critical error at 20181008T090952
2018-10-08T09:09:52.691Z,1538989792.691 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T09:09:52.692Z,1538989792.692 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T09:09:53.090Z,1538989793.090 [CBIT](INFO): Critical error at 20181008T090952
2018-10-08T09:10:07.067Z,1538989807.067 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:05:07.0Z
2018-10-08T09:10:07.067Z,1538989807.067 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T09:10:07.067Z,1538989807.067 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T09:10:11.617Z,1538989811.617 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20181008T052431/Courier0067.lzma
2018-10-08T09:10:12.408Z,1538989812.408 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0067.lzma.bak
2018-10-08T09:10:12.408Z,1538989812.408 [DataOverHttps](INFO): SBD MOMSN=8613701
2018-10-08T09:10:21.845Z,1538989821.845 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0068.lzma
2018-10-08T09:10:22.644Z,1538989822.644 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0068.lzma.bak
2018-10-08T09:10:22.644Z,1538989822.644 [DataOverHttps](INFO): SBD MOMSN=8613703
2018-10-08T09:10:23.652Z,1538989823.652 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T09:10:23.652Z,1538989823.652 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T09:10:23.652Z,1538989823.652 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T09:10:47.656Z,1538989847.656 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:10:47.656Z,1538989847.656 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-08T09:10:48.054Z,1538989848.054 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:10:48.054Z,1538989848.054 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:10:48.055Z,1538989848.055 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:13:48.099Z,1538990028.099 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:13:48.100Z,1538990028.100 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T09:13:48.100Z,1538990028.100 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:13:48.144Z,1538990028.144 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:13:48.536Z,1538990028.536 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:13:48.536Z,1538990028.536 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T09:13:48.937Z,1538990028.937 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:13:48.938Z,1538990028.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:13:48.938Z,1538990028.938 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:15:23.873Z,1538990123.873 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T09:15:23.873Z,1538990123.873 [Default:CheckIn:C.Wait] Stopped
2018-10-08T09:15:23.873Z,1538990123.873 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T09:15:23.874Z,1538990123.874 [Default:CheckIn:D] Running Loop=1
2018-10-08T09:15:24.257Z,1538990124.257 [Default:CheckIn:D] Stopped
2018-10-08T09:15:24.257Z,1538990124.257 [Default:CheckIn:E] Running Loop=1
2018-10-08T09:15:24.670Z,1538990124.670 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.339437 min 
2018-10-08T09:15:24.671Z,1538990124.671 [Default:CheckIn:E] Stopped
2018-10-08T09:15:24.671Z,1538990124.671 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T09:15:24.671Z,1538990124.671 [Default:CheckIn] Stopped
2018-10-08T09:15:24.671Z,1538990124.671 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T09:15:24.671Z,1538990124.671 [Default:CheckIn](INFO): Running loop #23
2018-10-08T09:15:24.671Z,1538990124.671 [Default:CheckIn] Running Loop=23
2018-10-08T09:15:24.671Z,1538990124.671 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T09:15:24.672Z,1538990124.672 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T09:16:09.326Z,1538990169.326 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T09:16:09.326Z,1538990169.326 [NAL9602] Data Fault, FailCount= 1
2018-10-08T09:16:09.326Z,1538990169.326 [NAL9602](ERROR): Data Fault
2018-10-08T09:16:09.403Z,1538990169.403 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T09:16:09.726Z,1538990169.726 [NAL9602](INFO): Powering down
2018-10-08T09:16:10.585Z,1538990170.585 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T09:16:10.586Z,1538990170.586 [NAL9602] No Fault, FailCount= 1
2018-10-08T09:16:40.054Z,1538990200.054 [NAL9602](INFO): Powering up NAL9602
2018-10-08T09:16:48.968Z,1538990208.968 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:16:48.973Z,1538990208.973 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-08T09:16:48.973Z,1538990208.973 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:16:49.028Z,1538990209.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:16:49.343Z,1538990209.343 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:16:49.343Z,1538990209.343 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-08T09:16:49.716Z,1538990209.716 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:16:49.717Z,1538990209.717 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:16:49.717Z,1538990209.717 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:16:51.254Z,1538990211.254 [NAL9602](INFO): NAL9602 initialized
2018-10-08T09:19:49.755Z,1538990389.755 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:19:49.755Z,1538990389.755 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-08T09:19:49.755Z,1538990389.755 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:19:49.794Z,1538990389.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:19:50.136Z,1538990390.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:19:50.136Z,1538990390.136 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-08T09:19:50.531Z,1538990390.531 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:19:50.531Z,1538990390.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:19:50.532Z,1538990390.532 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:20:24.927Z,1538990424.927 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:15:24.7Z
2018-10-08T09:20:24.927Z,1538990424.927 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T09:20:24.927Z,1538990424.927 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T09:20:29.500Z,1538990429.500 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0070.lzma
2018-10-08T09:20:30.268Z,1538990430.268 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0070.lzma.bak
2018-10-08T09:20:30.268Z,1538990430.268 [DataOverHttps](INFO): SBD MOMSN=8613709
2018-10-08T09:20:39.724Z,1538990439.724 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0071.lzma
2018-10-08T09:20:40.516Z,1538990440.516 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0071.lzma.bak
2018-10-08T09:20:40.516Z,1538990440.516 [DataOverHttps](INFO): SBD MOMSN=8613711
2018-10-08T09:20:41.493Z,1538990441.493 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T09:20:41.493Z,1538990441.493 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T09:20:41.493Z,1538990441.493 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T09:22:50.785Z,1538990570.785 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:22:50.785Z,1538990570.785 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-08T09:22:50.785Z,1538990570.785 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:22:50.811Z,1538990570.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:22:51.164Z,1538990571.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:22:51.165Z,1538990571.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-08T09:22:51.552Z,1538990571.552 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:22:51.552Z,1538990571.552 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:22:51.553Z,1538990571.553 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:24:49.093Z,1538990689.093 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-10-08T09:24:49.093Z,1538990689.093 [Rowe_600LCM] Communications Fault, FailCount= 2
2018-10-08T09:24:49.093Z,1538990689.093 [Rowe_600LCM](ERROR): Communications Fault
2018-10-08T09:24:49.147Z,1538990689.147 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2018-10-08T09:24:49.497Z,1538990689.497 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-10-08T09:24:49.666Z,1538990689.666 [Rowe_600LCM](INFO): Powering down
2018-10-08T09:24:51.127Z,1538990691.127 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2018-10-08T09:24:51.127Z,1538990691.127 [Rowe_600LCM] No Fault, FailCount= 2
2018-10-08T09:24:51.281Z,1538990691.281 [Rowe_600LCM](INFO): Initializing
2018-10-08T09:24:51.281Z,1538990691.281 [Rowe_600LCM](INFO): Checking LCM
2018-10-08T09:24:51.282Z,1538990691.282 [Rowe_600LCM](INFO): LCM OK
2018-10-08T09:24:51.282Z,1538990691.282 [Rowe_600LCM](INFO): Powering up
2018-10-08T09:24:52.732Z,1538990692.732 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T09:24:52.732Z,1538990692.732 [DropWeight] No Fault, FailCount= 1
2018-10-08T09:24:55.405Z,1538990695.405 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-10-08T09:24:55.511Z,1538990695.511 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 9600 >& /dev/null &
2018-10-08T09:24:55.512Z,1538990695.512 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-10-08T09:24:55.513Z,1538990695.513 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-10-08T09:24:55.514Z,1538990695.514 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-10-08T09:25:41.923Z,1538990741.923 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T09:25:41.923Z,1538990741.923 [Default:CheckIn:C.Wait] Stopped
2018-10-08T09:25:41.923Z,1538990741.923 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T09:25:41.923Z,1538990741.923 [Default:CheckIn:D] Running Loop=1
2018-10-08T09:25:42.294Z,1538990742.294 [Default:CheckIn:D] Stopped
2018-10-08T09:25:42.294Z,1538990742.294 [Default:CheckIn:E] Running Loop=1
2018-10-08T09:25:42.716Z,1538990742.716 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 237.640072 min 
2018-10-08T09:25:42.716Z,1538990742.716 [Default:CheckIn:E] Stopped
2018-10-08T09:25:42.716Z,1538990742.716 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T09:25:42.721Z,1538990742.721 [Default:CheckIn] Stopped
2018-10-08T09:25:42.721Z,1538990742.721 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T09:25:42.721Z,1538990742.721 [Default:CheckIn](INFO): Running loop #24
2018-10-08T09:25:42.721Z,1538990742.721 [Default:CheckIn] Running Loop=24
2018-10-08T09:25:42.721Z,1538990742.721 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T09:25:42.721Z,1538990742.721 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T09:25:51.836Z,1538990751.836 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:25:51.836Z,1538990751.836 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-08T09:25:51.836Z,1538990751.836 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:25:51.850Z,1538990751.850 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:25:52.268Z,1538990752.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:25:52.268Z,1538990752.268 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-08T09:25:52.652Z,1538990752.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:25:52.654Z,1538990752.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:25:52.654Z,1538990752.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:26:52.475Z,1538990812.475 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T09:26:52.475Z,1538990812.475 [NAL9602] Data Fault, FailCount= 2
2018-10-08T09:26:52.475Z,1538990812.475 [NAL9602](ERROR): Data Fault
2018-10-08T09:26:52.560Z,1538990812.560 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T09:26:52.882Z,1538990812.882 [NAL9602](INFO): Powering down
2018-10-08T09:26:53.733Z,1538990813.733 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T09:26:53.733Z,1538990813.733 [NAL9602] No Fault, FailCount= 2
2018-10-08T09:27:23.279Z,1538990843.279 [NAL9602](INFO): Powering up NAL9602
2018-10-08T09:27:34.478Z,1538990854.478 [NAL9602](INFO): NAL9602 initialized
2018-10-08T09:28:52.758Z,1538990932.758 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:28:52.758Z,1538990932.758 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-08T09:28:52.758Z,1538990932.758 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:28:52.792Z,1538990932.792 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:28:53.168Z,1538990933.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:28:53.168Z,1538990933.168 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-08T09:28:53.567Z,1538990933.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:28:53.568Z,1538990933.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:28:53.568Z,1538990933.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:30:42.935Z,1538991042.935 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:25:42.7Z
2018-10-08T09:30:42.935Z,1538991042.935 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T09:30:42.936Z,1538991042.936 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T09:30:47.464Z,1538991047.464 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0073.lzma
2018-10-08T09:30:48.264Z,1538991048.264 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0073.lzma.bak
2018-10-08T09:30:48.264Z,1538991048.264 [DataOverHttps](INFO): SBD MOMSN=8613717
2018-10-08T09:30:57.987Z,1538991057.987 [DataOverHttps](INFO): Sending 206 bytes from file Logs/20181008T052431/Express0074.lzma
2018-10-08T09:30:58.788Z,1538991058.788 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0074.lzma.bak
2018-10-08T09:30:58.788Z,1538991058.788 [DataOverHttps](INFO): SBD MOMSN=8613719
2018-10-08T09:30:59.796Z,1538991059.796 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T09:30:59.796Z,1538991059.796 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T09:30:59.796Z,1538991059.796 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T09:31:53.809Z,1538991113.809 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:31:53.810Z,1538991113.810 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-08T09:31:53.810Z,1538991113.810 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:31:53.832Z,1538991113.832 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:31:54.215Z,1538991114.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:31:54.215Z,1538991114.215 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-08T09:31:54.614Z,1538991114.614 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:31:54.615Z,1538991114.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:31:54.615Z,1538991114.615 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:34:54.619Z,1538991294.619 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:34:54.619Z,1538991294.619 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-08T09:34:54.619Z,1538991294.619 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:34:54.632Z,1538991294.632 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:34:55.047Z,1538991295.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:34:55.047Z,1538991295.047 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-08T09:34:55.433Z,1538991295.433 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:34:55.433Z,1538991295.433 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:34:55.434Z,1538991295.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:36:00.015Z,1538991360.015 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T09:36:00.016Z,1538991360.016 [Default:CheckIn:C.Wait] Stopped
2018-10-08T09:36:00.016Z,1538991360.016 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T09:36:00.016Z,1538991360.016 [Default:CheckIn:D] Running Loop=1
2018-10-08T09:36:00.461Z,1538991360.461 [Default:CheckIn:D] Stopped
2018-10-08T09:36:00.462Z,1538991360.462 [Default:CheckIn:E] Running Loop=1
2018-10-08T09:36:00.802Z,1538991360.802 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 247.942855 min 
2018-10-08T09:36:00.802Z,1538991360.802 [Default:CheckIn:E] Stopped
2018-10-08T09:36:00.802Z,1538991360.802 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T09:36:00.802Z,1538991360.802 [Default:CheckIn] Stopped
2018-10-08T09:36:00.802Z,1538991360.802 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T09:36:00.802Z,1538991360.802 [Default:CheckIn](INFO): Running loop #25
2018-10-08T09:36:00.803Z,1538991360.803 [Default:CheckIn] Running Loop=25
2018-10-08T09:36:00.803Z,1538991360.803 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T09:36:00.803Z,1538991360.803 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T09:37:35.523Z,1538991455.523 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T09:37:35.523Z,1538991455.523 [NAL9602] Data Fault, FailCount= 3
2018-10-08T09:37:35.523Z,1538991455.523 [NAL9602](ERROR): Data Fault
2018-10-08T09:37:35.678Z,1538991455.678 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T09:37:35.927Z,1538991455.927 [NAL9602](INFO): Powering down
2018-10-08T09:37:36.886Z,1538991456.886 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T09:37:36.886Z,1538991456.886 [NAL9602] No Fault, FailCount= 3
2018-10-08T09:37:55.665Z,1538991475.665 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:37:55.665Z,1538991475.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-08T09:37:55.665Z,1538991475.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:37:55.729Z,1538991475.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:37:56.064Z,1538991476.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:37:56.064Z,1538991476.064 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-08T09:37:56.488Z,1538991476.488 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:37:56.489Z,1538991476.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:37:56.489Z,1538991476.489 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:38:07.027Z,1538991487.027 [NAL9602](INFO): Powering up NAL9602
2018-10-08T09:38:17.959Z,1538991497.959 [NAL9602](INFO): NAL9602 initialized
2018-10-08T09:40:56.626Z,1538991656.626 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:40:56.626Z,1538991656.626 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-08T09:40:56.626Z,1538991656.626 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:40:56.640Z,1538991656.640 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:40:57.120Z,1538991657.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:40:57.121Z,1538991657.121 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-08T09:40:57.441Z,1538991657.441 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:40:57.441Z,1538991657.441 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:40:57.442Z,1538991657.442 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:41:01.048Z,1538991661.048 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:36:00.8Z
2018-10-08T09:41:01.048Z,1538991661.048 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T09:41:01.048Z,1538991661.048 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T09:41:05.311Z,1538991665.311 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0076.lzma
2018-10-08T09:41:06.104Z,1538991666.104 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0076.lzma.bak
2018-10-08T09:41:06.104Z,1538991666.104 [DataOverHttps](INFO): SBD MOMSN=8613725
2018-10-08T09:41:15.952Z,1538991675.952 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0077.lzma
2018-10-08T09:41:16.752Z,1538991676.752 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0077.lzma.bak
2018-10-08T09:41:16.752Z,1538991676.752 [DataOverHttps](INFO): SBD MOMSN=8613727
2018-10-08T09:41:17.750Z,1538991677.750 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T09:41:17.750Z,1538991677.750 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T09:41:17.750Z,1538991677.750 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T09:42:34.768Z,1538991754.768 [BPC1](ERROR): BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).
2018-10-08T09:43:57.826Z,1538991837.826 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:43:57.826Z,1538991837.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-08T09:43:57.826Z,1538991837.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:43:57.844Z,1538991837.844 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:43:58.313Z,1538991838.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:43:58.313Z,1538991838.313 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-08T09:43:58.632Z,1538991838.632 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:43:58.633Z,1538991838.633 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:43:58.633Z,1538991838.633 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:46:18.026Z,1538991978.026 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T09:46:18.026Z,1538991978.026 [Default:CheckIn:C.Wait] Stopped
2018-10-08T09:46:18.026Z,1538991978.026 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T09:46:18.026Z,1538991978.026 [Default:CheckIn:D] Running Loop=1
2018-10-08T09:46:18.467Z,1538991978.467 [Default:CheckIn:D] Stopped
2018-10-08T09:46:18.467Z,1538991978.467 [Default:CheckIn:E] Running Loop=1
2018-10-08T09:46:18.832Z,1538991978.832 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 258.242952 min 
2018-10-08T09:46:18.832Z,1538991978.832 [Default:CheckIn:E] Stopped
2018-10-08T09:46:18.832Z,1538991978.832 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T09:46:18.832Z,1538991978.832 [Default:CheckIn] Stopped
2018-10-08T09:46:18.832Z,1538991978.832 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T09:46:18.837Z,1538991978.837 [Default:CheckIn](INFO): Running loop #26
2018-10-08T09:46:18.837Z,1538991978.837 [Default:CheckIn] Running Loop=26
2018-10-08T09:46:18.837Z,1538991978.837 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T09:46:18.837Z,1538991978.837 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T09:46:58.794Z,1538992018.794 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:46:58.794Z,1538992018.794 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-08T09:46:58.794Z,1538992018.794 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:46:58.828Z,1538992018.828 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:46:59.240Z,1538992019.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:46:59.240Z,1538992019.240 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-08T09:46:59.591Z,1538992019.591 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:46:59.591Z,1538992019.591 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:46:59.592Z,1538992019.592 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:48:20.290Z,1538992100.290 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T09:48:20.291Z,1538992100.291 [NAL9602] Data Fault, FailCount= 4
2018-10-08T09:48:20.291Z,1538992100.291 [NAL9602](ERROR): Data Fault
2018-10-08T09:48:20.357Z,1538992100.357 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T09:48:23.795Z,1538992103.795 [NAL9602](INFO): Powering down
2018-10-08T09:48:24.635Z,1538992104.635 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T09:48:24.635Z,1538992104.635 [NAL9602] No Fault, FailCount= 4
2018-10-08T09:48:53.903Z,1538992133.903 [NAL9602](INFO): Powering up NAL9602
2018-10-08T09:49:05.107Z,1538992145.107 [NAL9602](INFO): NAL9602 initialized
2018-10-08T09:49:59.748Z,1538992199.748 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:49:59.748Z,1538992199.748 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-08T09:49:59.748Z,1538992199.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:49:59.783Z,1538992199.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:50:00.171Z,1538992200.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:50:00.172Z,1538992200.172 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-08T09:50:00.546Z,1538992200.546 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:50:00.547Z,1538992200.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:50:00.547Z,1538992200.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:51:19.125Z,1538992279.125 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:46:18.8Z
2018-10-08T09:51:19.125Z,1538992279.125 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T09:51:19.125Z,1538992279.125 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T09:51:23.807Z,1538992283.807 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0079.lzma
2018-10-08T09:51:24.588Z,1538992284.588 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0079.lzma.bak
2018-10-08T09:51:24.588Z,1538992284.588 [DataOverHttps](INFO): SBD MOMSN=8613733
2018-10-08T09:51:34.225Z,1538992294.225 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0080.lzma
2018-10-08T09:51:35.024Z,1538992295.024 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0080.lzma.bak
2018-10-08T09:51:35.024Z,1538992295.024 [DataOverHttps](INFO): SBD MOMSN=8613735
2018-10-08T09:51:36.033Z,1538992296.033 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T09:51:36.033Z,1538992296.033 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T09:51:36.033Z,1538992296.033 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T09:53:00.835Z,1538992380.835 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:53:00.835Z,1538992380.835 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-08T09:53:00.835Z,1538992380.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:53:00.914Z,1538992380.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:53:01.266Z,1538992381.266 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:53:01.266Z,1538992381.266 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-08T09:53:01.566Z,1538992381.566 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:53:01.567Z,1538992381.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:53:01.567Z,1538992381.567 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:54:54.002Z,1538992494.002 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T09:54:54.002Z,1538992494.002 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T09:54:54.002Z,1538992494.002 [DropWeight](ERROR): Hardware Fault
2018-10-08T09:54:54.097Z,1538992494.097 [CBIT](INFO): Critical error at 20181008T095454
2018-10-08T09:54:54.099Z,1538992494.099 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T09:54:54.100Z,1538992494.100 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T09:54:54.487Z,1538992494.487 [CBIT](INFO): Critical error at 20181008T095454
2018-10-08T09:56:01.569Z,1538992561.569 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:56:01.569Z,1538992561.569 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-08T09:56:01.569Z,1538992561.569 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:56:01.582Z,1538992561.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:56:01.990Z,1538992561.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:56:01.990Z,1538992561.990 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-08T09:56:02.372Z,1538992562.372 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:56:02.373Z,1538992562.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:56:02.373Z,1538992562.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:56:36.393Z,1538992596.393 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T09:56:36.394Z,1538992596.394 [Default:CheckIn:C.Wait] Stopped
2018-10-08T09:56:36.394Z,1538992596.394 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T09:56:36.394Z,1538992596.394 [Default:CheckIn:D] Running Loop=1
2018-10-08T09:56:36.815Z,1538992596.815 [Default:CheckIn:D] Stopped
2018-10-08T09:56:36.815Z,1538992596.815 [Default:CheckIn:E] Running Loop=1
2018-10-08T09:56:37.178Z,1538992597.178 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 268.548747 min 
2018-10-08T09:56:37.178Z,1538992597.178 [Default:CheckIn:E] Stopped
2018-10-08T09:56:37.179Z,1538992597.179 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T09:56:37.179Z,1538992597.179 [Default:CheckIn] Stopped
2018-10-08T09:56:37.179Z,1538992597.179 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T09:56:37.179Z,1538992597.179 [Default:CheckIn](INFO): Running loop #27
2018-10-08T09:56:37.179Z,1538992597.179 [Default:CheckIn] Running Loop=27
2018-10-08T09:56:37.179Z,1538992597.179 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T09:56:37.179Z,1538992597.179 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T09:59:02.468Z,1538992742.468 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T09:59:02.468Z,1538992742.468 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-08T09:59:02.468Z,1538992742.468 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T09:59:02.503Z,1538992742.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T09:59:02.956Z,1538992742.956 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T09:59:02.956Z,1538992742.956 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-08T09:59:03.261Z,1538992743.261 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T09:59:03.262Z,1538992743.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T09:59:03.262Z,1538992743.262 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T09:59:07.215Z,1538992747.215 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T09:59:07.215Z,1538992747.215 [NAL9602] Data Fault, FailCount= 5
2018-10-08T09:59:07.215Z,1538992747.215 [NAL9602](ERROR): Data Fault
2018-10-08T09:59:07.322Z,1538992747.322 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T09:59:07.323Z,1538992747.323 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T09:59:07.606Z,1538992747.606 [NAL9602](INFO): Powering down
2018-10-08T09:59:07.697Z,1538992747.697 [CBIT](INFO): Critical error at 20181008T095907
2018-10-08T09:59:35.639Z,1538992775.639 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T09:59:35.640Z,1538992775.640 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.642Z,1538992775.642 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T09:59:35.642Z,1538992775.642 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T09:59:35.643Z,1538992775.643 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T09:59:35.644Z,1538992775.644 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.645Z,1538992775.645 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.646Z,1538992775.646 [BPC1](ERROR): Battery stick #25 (s/n: 00E8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.647Z,1538992775.647 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.648Z,1538992775.648 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.649Z,1538992775.649 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.650Z,1538992775.650 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.650Z,1538992775.650 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.651Z,1538992775.651 [BPC1](FAULT): Battery stick #40 (s/n: 0095) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.652Z,1538992775.652 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T09:59:35.653Z,1538992775.653 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T09:59:35.654Z,1538992775.654 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T09:59:35.655Z,1538992775.655 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.656Z,1538992775.656 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T09:59:35.657Z,1538992775.657 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T09:59:35.658Z,1538992775.658 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T09:59:35.658Z,1538992775.658 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.659Z,1538992775.659 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T09:59:35.660Z,1538992775.660 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T09:59:35.661Z,1538992775.661 [BPC1](INFO): Calculating totals. Valid battery stick count: 34. Valid reserve battery stick count: 4.
2018-10-08T10:01:07.604Z,1538992867.604 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T10:01:07.604Z,1538992867.604 [NAL9602] No Fault, FailCount= 5
2018-10-08T10:01:07.918Z,1538992867.918 [NAL9602](INFO): Powering up NAL9602
2018-10-08T10:01:18.718Z,1538992878.718 [NAL9602](INFO): NAL9602 initialized
2018-10-08T10:01:37.573Z,1538992897.573 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T09:56:37.2Z
2018-10-08T10:01:37.573Z,1538992897.573 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T10:01:37.573Z,1538992897.573 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T10:01:42.100Z,1538992902.100 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Courier0082.lzma
2018-10-08T10:01:42.892Z,1538992902.892 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0082.lzma.bak
2018-10-08T10:01:42.892Z,1538992902.892 [DataOverHttps](INFO): SBD MOMSN=8613741
2018-10-08T10:01:53.239Z,1538992913.239 [DataOverHttps](INFO): Sending 224 bytes from file Logs/20181008T052431/Express0083.lzma
2018-10-08T10:01:53.992Z,1538992913.992 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0083.lzma.bak
2018-10-08T10:01:53.992Z,1538992913.992 [DataOverHttps](INFO): SBD MOMSN=8613743
2018-10-08T10:01:55.004Z,1538992915.004 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T10:01:55.004Z,1538992915.004 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T10:01:55.004Z,1538992915.004 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T10:02:03.420Z,1538992923.420 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:02:03.420Z,1538992923.420 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-08T10:02:03.420Z,1538992923.420 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:02:03.446Z,1538992923.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:02:03.833Z,1538992923.833 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:02:03.834Z,1538992923.834 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-08T10:02:04.225Z,1538992924.225 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:02:04.226Z,1538992924.226 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:02:04.226Z,1538992924.226 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:05:04.578Z,1538993104.578 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:05:04.578Z,1538993104.578 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-08T10:05:04.578Z,1538993104.578 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:05:04.620Z,1538993104.620 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:05:04.961Z,1538993104.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:05:04.961Z,1538993104.961 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-08T10:05:05.348Z,1538993105.348 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:05:05.348Z,1538993105.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:05:05.348Z,1538993105.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:06:55.517Z,1538993215.517 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T10:06:55.517Z,1538993215.517 [Default:CheckIn:C.Wait] Stopped
2018-10-08T10:06:55.517Z,1538993215.517 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T10:06:55.517Z,1538993215.517 [Default:CheckIn:D] Running Loop=1
2018-10-08T10:06:55.926Z,1538993215.926 [Default:CheckIn:D] Stopped
2018-10-08T10:06:55.926Z,1538993215.926 [Default:CheckIn:E] Running Loop=1
2018-10-08T10:06:56.330Z,1538993216.330 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 278.867253 min 
2018-10-08T10:06:56.330Z,1538993216.330 [Default:CheckIn:E] Stopped
2018-10-08T10:06:56.330Z,1538993216.330 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T10:06:56.330Z,1538993216.330 [Default:CheckIn] Stopped
2018-10-08T10:06:56.330Z,1538993216.330 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T10:06:56.330Z,1538993216.330 [Default:CheckIn](INFO): Running loop #28
2018-10-08T10:06:56.331Z,1538993216.331 [Default:CheckIn] Running Loop=28
2018-10-08T10:06:56.331Z,1538993216.331 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T10:06:56.331Z,1538993216.331 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T10:08:05.605Z,1538993285.605 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:08:05.605Z,1538993285.605 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-08T10:08:05.605Z,1538993285.605 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:08:05.627Z,1538993285.627 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:08:06.008Z,1538993286.008 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:08:06.008Z,1538993286.008 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-08T10:08:06.390Z,1538993286.390 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:08:06.390Z,1538993286.390 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:08:06.391Z,1538993286.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:09:54.157Z,1538993394.157 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T10:09:54.157Z,1538993394.157 [DropWeight] No Fault, FailCount= 1
2018-10-08T10:11:06.633Z,1538993466.633 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:11:06.633Z,1538993466.633 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-08T10:11:06.633Z,1538993466.633 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:11:06.647Z,1538993466.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:11:06.647Z,1538993466.647 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:11:20.159Z,1538993480.159 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T10:11:20.159Z,1538993480.159 [NAL9602] Data Fault, FailCount= 1
2018-10-08T10:11:20.159Z,1538993480.159 [NAL9602](ERROR): Data Fault
2018-10-08T10:11:20.297Z,1538993480.297 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T10:11:20.558Z,1538993480.558 [NAL9602](INFO): Powering down
2018-10-08T10:11:21.443Z,1538993481.443 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T10:11:21.443Z,1538993481.443 [NAL9602] No Fault, FailCount= 1
2018-10-08T10:11:50.959Z,1538993510.959 [NAL9602](INFO): Powering up NAL9602
2018-10-08T10:11:56.608Z,1538993516.608 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:06:56.3Z
2018-10-08T10:11:56.608Z,1538993516.608 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T10:11:56.608Z,1538993516.608 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T10:12:00.875Z,1538993520.875 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0085.lzma
2018-10-08T10:12:01.656Z,1538993521.656 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0085.lzma.bak
2018-10-08T10:12:01.661Z,1538993521.661 [DataOverHttps](INFO): SBD MOMSN=8613749
2018-10-08T10:12:02.740Z,1538993522.740 [NAL9602](INFO): NAL9602 initialized
2018-10-08T10:12:11.415Z,1538993531.415 [DataOverHttps](INFO): Sending 194 bytes from file Logs/20181008T052431/Express0086.lzma
2018-10-08T10:12:12.218Z,1538993532.218 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0086.lzma.bak
2018-10-08T10:12:12.219Z,1538993532.219 [DataOverHttps](INFO): SBD MOMSN=8613751
2018-10-08T10:12:13.184Z,1538993533.184 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T10:12:13.184Z,1538993533.184 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T10:12:13.184Z,1538993533.184 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T10:17:13.421Z,1538993833.421 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T10:17:13.421Z,1538993833.421 [Default:CheckIn:C.Wait] Stopped
2018-10-08T10:17:13.421Z,1538993833.421 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T10:17:13.421Z,1538993833.421 [Default:CheckIn:D] Running Loop=1
2018-10-08T10:17:13.826Z,1538993833.826 [Default:CheckIn:D] Stopped
2018-10-08T10:17:13.826Z,1538993833.826 [Default:CheckIn:E] Running Loop=1
2018-10-08T10:17:14.213Z,1538993834.213 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 289.165592 min 
2018-10-08T10:17:14.213Z,1538993834.213 [Default:CheckIn:E] Stopped
2018-10-08T10:17:14.213Z,1538993834.213 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T10:17:14.213Z,1538993834.213 [Default:CheckIn] Stopped
2018-10-08T10:17:14.214Z,1538993834.214 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T10:17:14.214Z,1538993834.214 [Default:CheckIn](INFO): Running loop #29
2018-10-08T10:17:14.214Z,1538993834.214 [Default:CheckIn] Running Loop=29
2018-10-08T10:17:14.214Z,1538993834.214 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T10:17:14.214Z,1538993834.214 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T10:22:07.243Z,1538994127.243 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T10:22:07.243Z,1538994127.243 [NAL9602] Data Fault, FailCount= 2
2018-10-08T10:22:07.243Z,1538994127.243 [NAL9602](ERROR): Data Fault
2018-10-08T10:22:07.334Z,1538994127.334 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T10:22:07.647Z,1538994127.647 [NAL9602](INFO): Powering down
2018-10-08T10:22:08.493Z,1538994128.493 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T10:22:08.494Z,1538994128.494 [NAL9602] No Fault, FailCount= 2
2018-10-08T10:22:14.484Z,1538994134.484 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:17:14.2Z
2018-10-08T10:22:14.484Z,1538994134.484 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T10:22:14.484Z,1538994134.484 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T10:22:19.218Z,1538994139.218 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0088.lzma
2018-10-08T10:22:19.976Z,1538994139.976 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0088.lzma.bak
2018-10-08T10:22:19.976Z,1538994139.976 [DataOverHttps](INFO): SBD MOMSN=8613757
2018-10-08T10:22:29.487Z,1538994149.487 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T052431/Express0089.lzma
2018-10-08T10:22:30.264Z,1538994150.264 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0089.lzma.bak
2018-10-08T10:22:30.264Z,1538994150.264 [DataOverHttps](INFO): SBD MOMSN=8613759
2018-10-08T10:22:31.245Z,1538994151.245 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T10:22:31.245Z,1538994151.245 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T10:22:31.245Z,1538994151.245 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T10:22:37.975Z,1538994157.975 [NAL9602](INFO): Powering up NAL9602
2018-10-08T10:22:49.175Z,1538994169.175 [NAL9602](INFO): NAL9602 initialized
2018-10-08T10:26:06.857Z,1538994366.857 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:26:06.858Z,1538994366.858 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-08T10:26:07.125Z,1538994367.125 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:26:07.126Z,1538994367.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:26:07.126Z,1538994367.126 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:27:31.718Z,1538994451.718 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T10:27:31.718Z,1538994451.718 [Default:CheckIn:C.Wait] Stopped
2018-10-08T10:27:31.718Z,1538994451.718 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T10:27:31.718Z,1538994451.718 [Default:CheckIn:D] Running Loop=1
2018-10-08T10:27:32.120Z,1538994452.120 [Default:CheckIn:D] Stopped
2018-10-08T10:27:32.120Z,1538994452.120 [Default:CheckIn:E] Running Loop=1
2018-10-08T10:27:32.546Z,1538994452.546 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 299.470508 min 
2018-10-08T10:27:32.546Z,1538994452.546 [Default:CheckIn:E] Stopped
2018-10-08T10:27:32.546Z,1538994452.546 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T10:27:32.546Z,1538994452.546 [Default:CheckIn] Stopped
2018-10-08T10:27:32.546Z,1538994452.546 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T10:27:32.547Z,1538994452.547 [Default:CheckIn](INFO): Running loop #30
2018-10-08T10:27:32.547Z,1538994452.547 [Default:CheckIn] Running Loop=30
2018-10-08T10:27:32.547Z,1538994452.547 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T10:27:32.547Z,1538994452.547 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T10:29:07.475Z,1538994547.475 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:29:07.475Z,1538994547.475 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T10:29:07.475Z,1538994547.475 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:29:07.505Z,1538994547.505 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:29:07.874Z,1538994547.874 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:29:07.874Z,1538994547.874 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T10:29:08.277Z,1538994548.277 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:29:08.278Z,1538994548.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:29:08.278Z,1538994548.278 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:32:08.671Z,1538994728.671 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:32:08.671Z,1538994728.671 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-08T10:32:08.672Z,1538994728.672 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:32:08.696Z,1538994728.696 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:32:09.067Z,1538994729.067 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:32:09.067Z,1538994729.067 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-08T10:32:09.438Z,1538994729.438 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:32:09.439Z,1538994729.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:32:09.439Z,1538994729.439 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:32:32.646Z,1538994752.646 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:27:32.5Z
2018-10-08T10:32:32.646Z,1538994752.646 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T10:32:32.646Z,1538994752.646 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T10:32:37.351Z,1538994757.351 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0091.lzma
2018-10-08T10:32:38.128Z,1538994758.128 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0091.lzma.bak
2018-10-08T10:32:38.128Z,1538994758.128 [DataOverHttps](INFO): SBD MOMSN=8613765
2018-10-08T10:32:47.798Z,1538994767.798 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20181008T052431/Express0092.lzma
2018-10-08T10:32:48.564Z,1538994768.564 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0092.lzma.bak
2018-10-08T10:32:48.564Z,1538994768.564 [DataOverHttps](INFO): SBD MOMSN=8613767
2018-10-08T10:32:49.553Z,1538994769.553 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T10:32:49.554Z,1538994769.554 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T10:32:49.554Z,1538994769.554 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T10:32:53.009Z,1538994773.009 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T10:32:53.009Z,1538994773.009 [NAL9602] Data Fault, FailCount= 3
2018-10-08T10:32:53.009Z,1538994773.009 [NAL9602](ERROR): Data Fault
2018-10-08T10:32:53.075Z,1538994773.075 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T10:32:53.154Z,1538994773.154 [NAL9602](INFO): Powering down
2018-10-08T10:32:53.964Z,1538994773.964 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T10:32:53.964Z,1538994773.964 [NAL9602] No Fault, FailCount= 3
2018-10-08T10:33:23.499Z,1538994803.499 [NAL9602](INFO): Powering up NAL9602
2018-10-08T10:33:34.699Z,1538994814.699 [NAL9602](INFO): NAL9602 initialized
2018-10-08T10:35:09.633Z,1538994909.633 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:35:09.634Z,1538994909.634 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-08T10:35:09.634Z,1538994909.634 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:35:09.655Z,1538994909.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:35:10.066Z,1538994910.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:35:10.066Z,1538994910.066 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-08T10:35:10.468Z,1538994910.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:35:10.474Z,1538994910.474 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:35:10.475Z,1538994910.475 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:37:49.733Z,1538995069.733 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T10:37:49.733Z,1538995069.733 [Default:CheckIn:C.Wait] Stopped
2018-10-08T10:37:49.734Z,1538995069.734 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T10:37:49.734Z,1538995069.734 [Default:CheckIn:D] Running Loop=1
2018-10-08T10:37:50.159Z,1538995070.159 [Default:CheckIn:D] Stopped
2018-10-08T10:37:50.160Z,1538995070.160 [Default:CheckIn:E] Running Loop=1
2018-10-08T10:37:50.532Z,1538995070.532 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 309.771159 min 
2018-10-08T10:37:50.532Z,1538995070.532 [Default:CheckIn:E] Stopped
2018-10-08T10:37:50.532Z,1538995070.532 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T10:37:50.532Z,1538995070.532 [Default:CheckIn] Stopped
2018-10-08T10:37:50.532Z,1538995070.532 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T10:37:50.533Z,1538995070.533 [Default:CheckIn](INFO): Running loop #31
2018-10-08T10:37:50.533Z,1538995070.533 [Default:CheckIn] Running Loop=31
2018-10-08T10:37:50.533Z,1538995070.533 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T10:37:50.533Z,1538995070.533 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T10:38:10.527Z,1538995090.527 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:38:10.527Z,1538995090.527 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-08T10:38:10.527Z,1538995090.527 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:38:10.561Z,1538995090.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:38:10.957Z,1538995090.957 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:38:10.957Z,1538995090.957 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-08T10:38:11.339Z,1538995091.339 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:38:11.340Z,1538995091.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:38:11.340Z,1538995091.340 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:38:22.548Z,1538995102.548 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.416568 seconds old.
2018-10-08T10:38:22.932Z,1538995102.932 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.800113 seconds old.
2018-10-08T10:38:23.334Z,1538995103.334 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.201944 seconds old.
2018-10-08T10:38:23.736Z,1538995103.736 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.604511 seconds old.
2018-10-08T10:38:24.147Z,1538995104.147 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.014934 seconds old.
2018-10-08T10:38:24.631Z,1538995104.631 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.498881 seconds old.
2018-10-08T10:38:24.938Z,1538995104.938 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.806596 seconds old.
2018-10-08T10:38:25.335Z,1538995105.335 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.203288 seconds old.
2018-10-08T10:39:55.526Z,1538995195.526 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T10:39:55.526Z,1538995195.526 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T10:39:55.526Z,1538995195.526 [DropWeight](ERROR): Hardware Fault
2018-10-08T10:39:55.621Z,1538995195.621 [CBIT](INFO): Critical error at 20181008T103955
2018-10-08T10:39:55.623Z,1538995195.623 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T10:39:55.624Z,1538995195.624 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T10:39:56.011Z,1538995196.011 [CBIT](INFO): Critical error at 20181008T103955
2018-10-08T10:41:11.360Z,1538995271.360 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:41:11.361Z,1538995271.361 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-08T10:41:11.361Z,1538995271.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:41:11.394Z,1538995271.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:41:11.807Z,1538995271.807 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:41:11.807Z,1538995271.807 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-08T10:41:12.187Z,1538995272.187 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:41:12.187Z,1538995272.187 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:41:12.188Z,1538995272.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:42:50.740Z,1538995370.740 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:37:50.5Z
2018-10-08T10:42:50.740Z,1538995370.740 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T10:42:50.740Z,1538995370.740 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T10:42:57.618Z,1538995377.618 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181008T052431/Courier0094.lzma
2018-10-08T10:42:58.420Z,1538995378.420 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0094.lzma.bak
2018-10-08T10:42:58.421Z,1538995378.421 [DataOverHttps](INFO): SBD MOMSN=8613773
2018-10-08T10:43:11.631Z,1538995391.631 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0095.lzma
2018-10-08T10:43:12.420Z,1538995392.420 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0095.lzma.bak
2018-10-08T10:43:12.420Z,1538995392.420 [DataOverHttps](INFO): SBD MOMSN=8613775
2018-10-08T10:43:13.422Z,1538995393.422 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T10:43:13.422Z,1538995393.422 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T10:43:13.422Z,1538995393.422 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T10:43:38.019Z,1538995418.019 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T10:43:38.019Z,1538995418.019 [NAL9602] Data Fault, FailCount= 4
2018-10-08T10:43:38.019Z,1538995418.019 [NAL9602](ERROR): Data Fault
2018-10-08T10:43:38.120Z,1538995418.120 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T10:43:38.410Z,1538995418.410 [NAL9602](INFO): Powering down
2018-10-08T10:43:39.274Z,1538995419.274 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T10:43:39.275Z,1538995419.275 [NAL9602] No Fault, FailCount= 4
2018-10-08T10:44:08.418Z,1538995448.418 [NAL9602](INFO): Powering up NAL9602
2018-10-08T10:44:12.458Z,1538995452.458 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:44:12.458Z,1538995452.458 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-08T10:44:12.458Z,1538995452.458 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:44:12.471Z,1538995452.471 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:44:12.867Z,1538995452.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:44:12.867Z,1538995452.867 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-08T10:44:13.265Z,1538995453.265 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:44:13.265Z,1538995453.265 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:44:13.266Z,1538995453.266 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:44:19.446Z,1538995459.446 [NAL9602](INFO): NAL9602 initialized
2018-10-08T10:47:13.556Z,1538995633.556 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:47:13.556Z,1538995633.556 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-08T10:47:13.556Z,1538995633.556 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:47:13.569Z,1538995633.569 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:47:13.970Z,1538995633.970 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:47:13.971Z,1538995633.971 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-08T10:47:14.378Z,1538995634.378 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:47:14.379Z,1538995634.379 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:47:14.380Z,1538995634.380 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:48:13.743Z,1538995693.743 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T10:48:13.743Z,1538995693.743 [Default:CheckIn:C.Wait] Stopped
2018-10-08T10:48:13.743Z,1538995693.743 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T10:48:13.743Z,1538995693.743 [Default:CheckIn:D] Running Loop=1
2018-10-08T10:48:14.174Z,1538995694.174 [Default:CheckIn:D] Stopped
2018-10-08T10:48:14.174Z,1538995694.174 [Default:CheckIn:E] Running Loop=1
2018-10-08T10:48:14.596Z,1538995694.596 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 320.171419 min 
2018-10-08T10:48:14.596Z,1538995694.596 [Default:CheckIn:E] Stopped
2018-10-08T10:48:14.621Z,1538995694.621 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T10:48:14.621Z,1538995694.621 [Default:CheckIn] Stopped
2018-10-08T10:48:14.621Z,1538995694.621 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T10:48:14.622Z,1538995694.622 [Default:CheckIn](INFO): Running loop #32
2018-10-08T10:48:14.622Z,1538995694.622 [Default:CheckIn] Running Loop=32
2018-10-08T10:48:14.622Z,1538995694.622 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T10:48:14.622Z,1538995694.622 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T10:50:14.422Z,1538995814.422 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:50:14.422Z,1538995814.422 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-08T10:50:14.422Z,1538995814.422 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:50:14.444Z,1538995814.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:50:14.825Z,1538995814.825 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:50:14.826Z,1538995814.826 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-08T10:50:15.200Z,1538995815.200 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:50:15.200Z,1538995815.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:50:15.205Z,1538995815.205 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:53:14.973Z,1538995994.973 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:48:14.6Z
2018-10-08T10:53:14.974Z,1538995994.974 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T10:53:14.974Z,1538995994.974 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T10:53:15.365Z,1538995995.365 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:53:15.366Z,1538995995.366 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-08T10:53:15.366Z,1538995995.366 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:53:15.379Z,1538995995.379 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:53:16.070Z,1538995996.070 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:53:16.070Z,1538995996.070 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-08T10:53:16.229Z,1538995996.229 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:53:16.230Z,1538995996.230 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:53:16.231Z,1538995996.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:53:19.514Z,1538995999.514 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0097.lzma
2018-10-08T10:53:20.314Z,1538996000.314 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0097.lzma.bak
2018-10-08T10:53:20.314Z,1538996000.314 [DataOverHttps](INFO): SBD MOMSN=8613781
2018-10-08T10:53:29.805Z,1538996009.805 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0098.lzma
2018-10-08T10:53:30.604Z,1538996010.604 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0098.lzma.bak
2018-10-08T10:53:30.604Z,1538996010.604 [DataOverHttps](INFO): SBD MOMSN=8613783
2018-10-08T10:53:31.575Z,1538996011.575 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T10:53:31.575Z,1538996011.575 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T10:53:31.575Z,1538996011.575 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T10:54:20.354Z,1538996060.354 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T10:54:20.355Z,1538996060.355 [NAL9602] Data Fault, FailCount= 5
2018-10-08T10:54:20.355Z,1538996060.355 [NAL9602](ERROR): Data Fault
2018-10-08T10:54:20.445Z,1538996060.445 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T10:54:20.446Z,1538996060.446 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T10:54:20.754Z,1538996060.754 [NAL9602](INFO): Powering down
2018-10-08T10:54:20.904Z,1538996060.904 [CBIT](INFO): Critical error at 20181008T105420
2018-10-08T10:54:55.948Z,1538996095.948 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T10:54:55.948Z,1538996095.948 [DropWeight] No Fault, FailCount= 1
2018-10-08T10:56:16.261Z,1538996176.261 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:56:16.261Z,1538996176.261 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-08T10:56:16.261Z,1538996176.261 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:56:16.341Z,1538996176.341 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:56:16.643Z,1538996176.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:56:16.644Z,1538996176.644 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-08T10:56:17.043Z,1538996177.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:56:17.044Z,1538996177.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:56:17.044Z,1538996177.044 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T10:56:20.643Z,1538996180.643 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T10:56:20.643Z,1538996180.643 [NAL9602] No Fault, FailCount= 5
2018-10-08T10:56:20.986Z,1538996180.986 [NAL9602](INFO): Powering up NAL9602
2018-10-08T10:56:31.787Z,1538996191.787 [NAL9602](INFO): NAL9602 initialized
2018-10-08T10:58:31.788Z,1538996311.788 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T10:58:31.789Z,1538996311.789 [Default:CheckIn:C.Wait] Stopped
2018-10-08T10:58:31.789Z,1538996311.789 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T10:58:31.789Z,1538996311.789 [Default:CheckIn:D] Running Loop=1
2018-10-08T10:58:32.190Z,1538996312.190 [Default:CheckIn:D] Stopped
2018-10-08T10:58:32.190Z,1538996312.190 [Default:CheckIn:E] Running Loop=1
2018-10-08T10:58:32.584Z,1538996312.584 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 330.471680 min 
2018-10-08T10:58:32.585Z,1538996312.585 [Default:CheckIn:E] Stopped
2018-10-08T10:58:32.585Z,1538996312.585 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T10:58:32.585Z,1538996312.585 [Default:CheckIn] Stopped
2018-10-08T10:58:32.585Z,1538996312.585 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T10:58:32.585Z,1538996312.585 [Default:CheckIn](INFO): Running loop #33
2018-10-08T10:58:32.586Z,1538996312.586 [Default:CheckIn] Running Loop=33
2018-10-08T10:58:32.586Z,1538996312.586 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T10:58:32.586Z,1538996312.586 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T10:59:17.330Z,1538996357.330 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T10:59:17.330Z,1538996357.330 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-08T10:59:17.330Z,1538996357.330 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T10:59:17.344Z,1538996357.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T10:59:17.768Z,1538996357.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T10:59:17.768Z,1538996357.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-08T10:59:18.159Z,1538996358.159 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T10:59:18.160Z,1538996358.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T10:59:18.160Z,1538996358.160 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:02:18.399Z,1538996538.399 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:02:18.399Z,1538996538.399 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-08T11:02:18.399Z,1538996538.399 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:02:18.437Z,1538996538.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:02:18.880Z,1538996538.880 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:02:18.885Z,1538996538.885 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-08T11:02:19.212Z,1538996539.212 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:02:19.212Z,1538996539.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:02:19.213Z,1538996539.213 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:03:32.795Z,1538996612.795 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T10:58:32.6Z
2018-10-08T11:03:32.795Z,1538996612.795 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T11:03:32.795Z,1538996612.795 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T11:03:37.460Z,1538996617.460 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T052431/Courier0100.lzma
2018-10-08T11:03:38.260Z,1538996618.260 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0100.lzma.bak
2018-10-08T11:03:38.260Z,1538996618.260 [DataOverHttps](INFO): SBD MOMSN=8613789
2018-10-08T11:03:47.815Z,1538996627.815 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0101.lzma
2018-10-08T11:03:48.608Z,1538996628.608 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0101.lzma.bak
2018-10-08T11:03:48.608Z,1538996628.608 [DataOverHttps](INFO): SBD MOMSN=8613791
2018-10-08T11:03:49.639Z,1538996629.639 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T11:03:49.639Z,1538996629.639 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T11:03:49.639Z,1538996629.639 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T11:05:19.302Z,1538996719.302 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:05:19.303Z,1538996719.303 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-08T11:05:19.303Z,1538996719.303 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:05:19.320Z,1538996719.320 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:05:19.734Z,1538996719.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:05:19.734Z,1538996719.734 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-08T11:05:20.111Z,1538996720.111 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:05:20.111Z,1538996720.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:05:20.112Z,1538996720.112 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:06:34.622Z,1538996794.622 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T11:06:34.622Z,1538996794.622 [NAL9602] Data Fault, FailCount= 1
2018-10-08T11:06:34.622Z,1538996794.622 [NAL9602](ERROR): Data Fault
2018-10-08T11:06:34.716Z,1538996794.716 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T11:06:35.018Z,1538996795.018 [NAL9602](INFO): Powering down
2018-10-08T11:06:35.873Z,1538996795.873 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T11:06:35.873Z,1538996795.873 [NAL9602] No Fault, FailCount= 1
2018-10-08T11:07:05.203Z,1538996825.203 [NAL9602](INFO): Powering up NAL9602
2018-10-08T11:07:16.403Z,1538996836.403 [NAL9602](INFO): NAL9602 initialized
2018-10-08T11:08:20.319Z,1538996900.319 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:08:20.319Z,1538996900.319 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-08T11:08:20.319Z,1538996900.319 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:08:20.333Z,1538996900.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:08:20.782Z,1538996900.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:08:20.782Z,1538996900.782 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-08T11:08:21.068Z,1538996901.068 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:08:21.068Z,1538996901.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:08:21.081Z,1538996901.081 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:08:49.958Z,1538996929.958 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T11:08:49.958Z,1538996929.958 [Default:CheckIn:C.Wait] Stopped
2018-10-08T11:08:49.958Z,1538996929.958 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T11:08:49.958Z,1538996929.958 [Default:CheckIn:D] Running Loop=1
2018-10-08T11:08:50.317Z,1538996930.317 [Default:CheckIn:D] Stopped
2018-10-08T11:08:50.318Z,1538996930.318 [Default:CheckIn:E] Running Loop=1
2018-10-08T11:08:50.751Z,1538996930.751 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 340.773796 min 
2018-10-08T11:08:50.751Z,1538996930.751 [Default:CheckIn:E] Stopped
2018-10-08T11:08:50.751Z,1538996930.751 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T11:08:50.752Z,1538996930.752 [Default:CheckIn] Stopped
2018-10-08T11:08:50.752Z,1538996930.752 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T11:08:50.752Z,1538996930.752 [Default:CheckIn](INFO): Running loop #34
2018-10-08T11:08:50.761Z,1538996930.761 [Default:CheckIn] Running Loop=34
2018-10-08T11:08:50.761Z,1538996930.761 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T11:08:50.762Z,1538996930.762 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T11:11:21.339Z,1538997081.339 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:11:21.340Z,1538997081.340 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-08T11:11:21.340Z,1538997081.340 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:11:21.353Z,1538997081.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:11:21.748Z,1538997081.748 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:11:21.748Z,1538997081.748 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-08T11:11:22.116Z,1538997082.116 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:11:22.116Z,1538997082.116 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:11:22.116Z,1538997082.116 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:13:50.914Z,1538997230.914 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:08:50.8Z
2018-10-08T11:13:50.914Z,1538997230.914 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T11:13:50.915Z,1538997230.915 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T11:13:55.428Z,1538997235.428 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0103.lzma
2018-10-08T11:13:56.196Z,1538997236.196 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0103.lzma.bak
2018-10-08T11:13:56.196Z,1538997236.196 [DataOverHttps](INFO): SBD MOMSN=8613797
2018-10-08T11:14:06.016Z,1538997246.016 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0104.lzma
2018-10-08T11:14:06.788Z,1538997246.788 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0104.lzma.bak
2018-10-08T11:14:06.788Z,1538997246.788 [DataOverHttps](INFO): SBD MOMSN=8613799
2018-10-08T11:14:07.864Z,1538997247.864 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T11:14:07.865Z,1538997247.865 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T11:14:07.865Z,1538997247.865 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T11:14:22.285Z,1538997262.285 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:14:22.285Z,1538997262.285 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-08T11:14:22.285Z,1538997262.285 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:14:22.315Z,1538997262.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:14:22.688Z,1538997262.688 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:14:22.688Z,1538997262.688 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-08T11:14:23.091Z,1538997263.091 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:14:23.091Z,1538997263.091 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:14:23.091Z,1538997263.091 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:17:19.806Z,1538997439.806 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T11:17:19.806Z,1538997439.806 [NAL9602] Data Fault, FailCount= 2
2018-10-08T11:17:19.806Z,1538997439.806 [NAL9602](ERROR): Data Fault
2018-10-08T11:17:19.873Z,1538997439.873 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T11:17:20.199Z,1538997440.199 [NAL9602](INFO): Powering down
2018-10-08T11:17:21.058Z,1538997441.058 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T11:17:21.058Z,1538997441.058 [NAL9602] No Fault, FailCount= 2
2018-10-08T11:17:23.464Z,1538997443.464 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:17:23.464Z,1538997443.464 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-08T11:17:23.464Z,1538997443.464 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:17:23.490Z,1538997443.490 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:17:23.882Z,1538997443.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:17:23.882Z,1538997443.882 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-08T11:17:24.242Z,1538997444.242 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:17:24.243Z,1538997444.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:17:24.243Z,1538997444.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:17:50.607Z,1538997470.607 [NAL9602](INFO): Powering up NAL9602
2018-10-08T11:18:01.799Z,1538997481.799 [NAL9602](INFO): NAL9602 initialized
2018-10-08T11:19:08.233Z,1538997548.233 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T11:19:08.234Z,1538997548.234 [Default:CheckIn:C.Wait] Stopped
2018-10-08T11:19:08.234Z,1538997548.234 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T11:19:08.234Z,1538997548.234 [Default:CheckIn:D] Running Loop=1
2018-10-08T11:19:08.593Z,1538997548.593 [Default:CheckIn:D] Stopped
2018-10-08T11:19:08.593Z,1538997548.593 [Default:CheckIn:E] Running Loop=1
2018-10-08T11:19:08.995Z,1538997548.995 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 351.078385 min 
2018-10-08T11:19:08.996Z,1538997548.996 [Default:CheckIn:E] Stopped
2018-10-08T11:19:08.996Z,1538997548.996 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T11:19:08.996Z,1538997548.996 [Default:CheckIn] Stopped
2018-10-08T11:19:08.996Z,1538997548.996 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T11:19:08.996Z,1538997548.996 [Default:CheckIn](INFO): Running loop #35
2018-10-08T11:19:08.996Z,1538997548.996 [Default:CheckIn] Running Loop=35
2018-10-08T11:19:08.996Z,1538997548.996 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T11:19:08.997Z,1538997548.997 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T11:20:24.520Z,1538997624.520 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:20:24.520Z,1538997624.520 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-08T11:20:24.525Z,1538997624.525 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:20:24.558Z,1538997624.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:20:24.942Z,1538997624.942 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:20:24.942Z,1538997624.942 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-08T11:20:25.331Z,1538997625.331 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:20:25.332Z,1538997625.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:20:25.332Z,1538997625.332 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:23:25.724Z,1538997805.724 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:23:25.724Z,1538997805.724 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-08T11:23:25.724Z,1538997805.724 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:23:25.774Z,1538997805.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:23:26.136Z,1538997806.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:23:26.136Z,1538997806.136 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-08T11:23:26.520Z,1538997806.520 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:23:26.520Z,1538997806.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:23:26.525Z,1538997806.525 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:24:09.333Z,1538997849.333 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:19:08.0Z
2018-10-08T11:24:09.333Z,1538997849.333 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T11:24:09.333Z,1538997849.333 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T11:24:13.957Z,1538997853.957 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0106.lzma
2018-10-08T11:24:14.759Z,1538997854.759 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0106.lzma.bak
2018-10-08T11:24:14.759Z,1538997854.759 [DataOverHttps](INFO): SBD MOMSN=8613805
2018-10-08T11:24:24.363Z,1538997864.363 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0107.lzma
2018-10-08T11:24:25.136Z,1538997865.136 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0107.lzma.bak
2018-10-08T11:24:25.136Z,1538997865.136 [DataOverHttps](INFO): SBD MOMSN=8613807
2018-10-08T11:24:26.171Z,1538997866.171 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T11:24:26.172Z,1538997866.172 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T11:24:26.172Z,1538997866.172 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T11:24:57.394Z,1538997897.394 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T11:24:57.394Z,1538997897.394 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T11:24:57.394Z,1538997897.394 [DropWeight](ERROR): Hardware Fault
2018-10-08T11:24:57.485Z,1538997897.485 [CBIT](INFO): Critical error at 20181008T112457
2018-10-08T11:24:57.488Z,1538997897.488 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T11:24:57.488Z,1538997897.488 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T11:24:57.889Z,1538997897.889 [CBIT](INFO): Critical error at 20181008T112457
2018-10-08T11:25:17.470Z,1538997917.470 [CBIT](IMPORTANT): Beginning ground fault scan
2018-10-08T11:25:30.207Z,1538997930.207 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.010832
CHAN A1 (24V): -0.005615
CHAN A2 (12V): -0.002418
CHAN A3 (5V): -0.001969
CHAN B0 (3.3V): 0.000346
CHAN B1 (3.15aV): -0.000079
CHAN B2 (3.15bV): -0.000260
CHAN B3 (GND): -0.000332
OPEN: -0.000445
Full Scale Calc: 4.765 mA, -1.589 mA
2018-10-08T11:26:26.905Z,1538997986.905 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:26:26.905Z,1538997986.905 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-08T11:26:26.905Z,1538997986.905 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:26:26.918Z,1538997986.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:26:26.919Z,1538997986.919 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:28:03.238Z,1538998083.238 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T11:28:03.238Z,1538998083.238 [NAL9602] Data Fault, FailCount= 3
2018-10-08T11:28:03.238Z,1538998083.238 [NAL9602](ERROR): Data Fault
2018-10-08T11:28:03.319Z,1538998083.319 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T11:28:03.638Z,1538998083.638 [NAL9602](INFO): Powering down
2018-10-08T11:28:04.663Z,1538998084.663 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T11:28:04.663Z,1538998084.663 [NAL9602] No Fault, FailCount= 3
2018-10-08T11:28:33.970Z,1538998113.970 [NAL9602](INFO): Powering up NAL9602
2018-10-08T11:28:45.170Z,1538998125.170 [NAL9602](INFO): NAL9602 initialized
2018-10-08T11:29:26.435Z,1538998166.435 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T11:29:26.435Z,1538998166.435 [Default:CheckIn:C.Wait] Stopped
2018-10-08T11:29:26.435Z,1538998166.435 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T11:29:26.435Z,1538998166.435 [Default:CheckIn:D] Running Loop=1
2018-10-08T11:29:26.835Z,1538998166.835 [Default:CheckIn:D] Stopped
2018-10-08T11:29:26.835Z,1538998166.835 [Default:CheckIn:E] Running Loop=1
2018-10-08T11:29:27.220Z,1538998167.220 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 361.382422 min 
2018-10-08T11:29:27.220Z,1538998167.220 [Default:CheckIn:E] Stopped
2018-10-08T11:29:27.220Z,1538998167.220 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T11:29:27.220Z,1538998167.220 [Default:CheckIn] Stopped
2018-10-08T11:29:27.220Z,1538998167.220 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T11:29:27.225Z,1538998167.225 [Default:CheckIn](INFO): Running loop #36
2018-10-08T11:29:27.225Z,1538998167.225 [Default:CheckIn] Running Loop=36
2018-10-08T11:29:27.225Z,1538998167.225 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T11:29:27.225Z,1538998167.225 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T11:30:37.156Z,1538998237.156 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T11:30:37.157Z,1538998237.157 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.158Z,1538998237.158 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T11:30:37.159Z,1538998237.159 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T11:30:37.159Z,1538998237.159 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T11:30:37.160Z,1538998237.160 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.161Z,1538998237.161 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.162Z,1538998237.162 [BPC1](ERROR): Battery stick #25 (s/n: 00E8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.163Z,1538998237.163 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.164Z,1538998237.164 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.164Z,1538998237.164 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.165Z,1538998237.165 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.166Z,1538998237.166 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.167Z,1538998237.167 [BPC1](ERROR): Battery stick #40 (s/n: 0095) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.168Z,1538998237.168 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T11:30:37.169Z,1538998237.169 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T11:30:37.169Z,1538998237.169 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T11:30:37.170Z,1538998237.170 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.171Z,1538998237.171 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T11:30:37.172Z,1538998237.172 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T11:30:37.173Z,1538998237.173 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T11:30:37.174Z,1538998237.174 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.175Z,1538998237.175 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T11:30:37.176Z,1538998237.176 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T11:30:37.176Z,1538998237.176 [BPC1](INFO): Calculating totals. Valid battery stick count: 34. Valid reserve battery stick count: 4.
2018-10-08T11:30:37.180Z,1538998237.180 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 22 sticks.
2018-10-08T11:30:37.180Z,1538998237.180 [BPC1] Data Fault, FailCount= 1
2018-10-08T11:30:37.180Z,1538998237.180 [BPC1](ERROR): Data Fault
2018-10-08T11:30:37.271Z,1538998237.271 [CBIT](ERROR): Data Fault in component: BPC1
2018-10-08T11:34:27.322Z,1538998467.322 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:29:27.2Z
2018-10-08T11:34:27.322Z,1538998467.322 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T11:34:27.322Z,1538998467.322 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T11:34:31.832Z,1538998471.832 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20181008T052431/Courier0109.lzma
2018-10-08T11:34:32.632Z,1538998472.632 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0109.lzma.bak
2018-10-08T11:34:32.632Z,1538998472.632 [DataOverHttps](INFO): SBD MOMSN=8613813
2018-10-08T11:34:42.205Z,1538998482.205 [DataOverHttps](INFO): Sending 434 bytes from file Logs/20181008T052431/Express0110.lzma
2018-10-08T11:34:43.004Z,1538998483.004 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0110.lzma.bak
2018-10-08T11:34:43.004Z,1538998483.004 [DataOverHttps](INFO): SBD MOMSN=8613815
2018-10-08T11:34:44.009Z,1538998484.009 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T11:34:44.009Z,1538998484.009 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T11:34:44.009Z,1538998484.009 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T11:38:48.759Z,1538998728.759 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T11:38:48.759Z,1538998728.759 [NAL9602] Data Fault, FailCount= 4
2018-10-08T11:38:48.759Z,1538998728.759 [NAL9602](ERROR): Data Fault
2018-10-08T11:38:48.861Z,1538998728.861 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T11:38:48.890Z,1538998728.890 [NAL9602](INFO): Powering down
2018-10-08T11:38:49.757Z,1538998729.757 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T11:38:49.757Z,1538998729.757 [NAL9602] No Fault, FailCount= 4
2018-10-08T11:39:19.274Z,1538998759.274 [NAL9602](INFO): Powering up NAL9602
2018-10-08T11:39:30.074Z,1538998770.074 [NAL9602](INFO): NAL9602 initialized
2018-10-08T11:39:44.152Z,1538998784.152 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T11:39:44.152Z,1538998784.152 [Default:CheckIn:C.Wait] Stopped
2018-10-08T11:39:44.152Z,1538998784.152 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T11:39:44.152Z,1538998784.152 [Default:CheckIn:D] Running Loop=1
2018-10-08T11:39:44.528Z,1538998784.528 [Default:CheckIn:D] Stopped
2018-10-08T11:39:44.528Z,1538998784.528 [Default:CheckIn:E] Running Loop=1
2018-10-08T11:39:44.937Z,1538998784.937 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 371.677311 min 
2018-10-08T11:39:44.937Z,1538998784.937 [Default:CheckIn:E] Stopped
2018-10-08T11:39:44.938Z,1538998784.938 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T11:39:44.938Z,1538998784.938 [Default:CheckIn] Stopped
2018-10-08T11:39:44.938Z,1538998784.938 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T11:39:44.938Z,1538998784.938 [Default:CheckIn](INFO): Running loop #37
2018-10-08T11:39:44.938Z,1538998784.938 [Default:CheckIn] Running Loop=37
2018-10-08T11:39:44.938Z,1538998784.938 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T11:39:44.938Z,1538998784.938 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T11:39:57.666Z,1538998797.666 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T11:39:57.666Z,1538998797.666 [DropWeight] No Fault, FailCount= 1
2018-10-08T11:40:38.047Z,1538998838.047 [CBIT](INFO): Clearing failed state for component BPC1
2018-10-08T11:40:38.048Z,1538998838.048 [BPC1] No Fault, FailCount= 1
2018-10-08T11:41:27.206Z,1538998887.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:41:27.207Z,1538998887.207 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-08T11:41:27.607Z,1538998887.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:41:27.607Z,1538998887.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:41:27.608Z,1538998887.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:44:27.806Z,1538999067.806 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:44:27.806Z,1538999067.806 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T11:44:27.806Z,1538999067.806 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:44:27.831Z,1538999067.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:44:28.222Z,1538999068.222 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:44:28.222Z,1538999068.222 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T11:44:28.627Z,1538999068.627 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:44:28.627Z,1538999068.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:44:28.627Z,1538999068.627 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:44:45.035Z,1538999085.035 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:39:44.9Z
2018-10-08T11:44:45.035Z,1538999085.035 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T11:44:45.035Z,1538999085.035 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T11:44:49.722Z,1538999089.722 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0112.lzma
2018-10-08T11:44:50.524Z,1538999090.524 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0112.lzma.bak
2018-10-08T11:44:50.524Z,1538999090.524 [DataOverHttps](INFO): SBD MOMSN=8613821
2018-10-08T11:45:00.953Z,1538999100.953 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0113.lzma
2018-10-08T11:45:01.752Z,1538999101.752 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0113.lzma.bak
2018-10-08T11:45:01.752Z,1538999101.752 [DataOverHttps](INFO): SBD MOMSN=8613823
2018-10-08T11:45:02.839Z,1538999102.839 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T11:45:02.839Z,1538999102.839 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T11:45:02.840Z,1538999102.840 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T11:47:28.770Z,1538999248.770 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:47:28.771Z,1538999248.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-08T11:47:28.771Z,1538999248.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:47:28.784Z,1538999248.784 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:47:29.194Z,1538999249.194 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:47:29.194Z,1538999249.194 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-08T11:47:29.583Z,1538999249.583 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:47:29.584Z,1538999249.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:47:29.584Z,1538999249.584 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:49:31.515Z,1538999371.515 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T11:49:31.515Z,1538999371.515 [NAL9602] Data Fault, FailCount= 5
2018-10-08T11:49:31.515Z,1538999371.515 [NAL9602](ERROR): Data Fault
2018-10-08T11:49:31.589Z,1538999371.589 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T11:49:31.590Z,1538999371.590 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T11:49:31.923Z,1538999371.923 [NAL9602](INFO): Powering down
2018-10-08T11:49:32.000Z,1538999372.000 [CBIT](INFO): Critical error at 20181008T114931
2018-10-08T11:50:03.177Z,1538999403.177 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T11:50:03.177Z,1538999403.177 [Default:CheckIn:C.Wait] Stopped
2018-10-08T11:50:03.177Z,1538999403.177 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T11:50:03.177Z,1538999403.177 [Default:CheckIn:D] Running Loop=1
2018-10-08T11:50:03.570Z,1538999403.570 [Default:CheckIn:D] Stopped
2018-10-08T11:50:03.570Z,1538999403.570 [Default:CheckIn:E] Running Loop=1
2018-10-08T11:50:03.970Z,1538999403.970 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 381.994661 min 
2018-10-08T11:50:03.971Z,1538999403.971 [Default:CheckIn:E] Stopped
2018-10-08T11:50:03.971Z,1538999403.971 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T11:50:03.971Z,1538999403.971 [Default:CheckIn] Stopped
2018-10-08T11:50:03.971Z,1538999403.971 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T11:50:03.971Z,1538999403.971 [Default:CheckIn](INFO): Running loop #38
2018-10-08T11:50:03.971Z,1538999403.971 [Default:CheckIn] Running Loop=38
2018-10-08T11:50:03.971Z,1538999403.971 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T11:50:03.972Z,1538999403.972 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T11:50:29.732Z,1538999429.732 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:50:29.732Z,1538999429.732 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-08T11:50:29.732Z,1538999429.732 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:50:29.745Z,1538999429.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:50:30.189Z,1538999430.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:50:30.190Z,1538999430.190 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-08T11:50:30.515Z,1538999430.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:50:30.516Z,1538999430.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:50:30.516Z,1538999430.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:51:31.540Z,1538999491.540 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T11:51:31.540Z,1538999491.540 [NAL9602] No Fault, FailCount= 5
2018-10-08T11:51:31.867Z,1538999491.867 [NAL9602](INFO): Powering up NAL9602
2018-10-08T11:51:43.071Z,1538999503.071 [NAL9602](INFO): NAL9602 initialized
2018-10-08T11:53:30.685Z,1538999610.685 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:53:30.685Z,1538999610.685 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-08T11:53:30.685Z,1538999610.685 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:53:30.704Z,1538999610.704 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:53:31.162Z,1538999611.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:53:31.162Z,1538999611.162 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-08T11:53:31.498Z,1538999611.498 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:53:31.499Z,1538999611.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:53:31.499Z,1538999611.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:55:04.338Z,1538999704.338 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T11:50:03.0Z
2018-10-08T11:55:04.338Z,1538999704.338 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T11:55:04.338Z,1538999704.338 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T11:55:08.908Z,1538999708.908 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T052431/Courier0115.lzma
2018-10-08T11:55:09.684Z,1538999709.684 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0115.lzma.bak
2018-10-08T11:55:09.684Z,1538999709.684 [DataOverHttps](INFO): SBD MOMSN=8613829
2018-10-08T11:55:19.484Z,1538999719.484 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0116.lzma
2018-10-08T11:55:20.285Z,1538999720.285 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0116.lzma.bak
2018-10-08T11:55:20.286Z,1538999720.286 [DataOverHttps](INFO): SBD MOMSN=8613831
2018-10-08T11:55:21.285Z,1538999721.285 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T11:55:21.286Z,1538999721.286 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T11:55:21.286Z,1538999721.286 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T11:56:31.939Z,1538999791.939 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:56:31.939Z,1538999791.939 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-08T11:56:31.939Z,1538999791.939 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:56:31.969Z,1538999791.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:56:32.380Z,1538999792.380 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:56:32.380Z,1538999792.380 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-08T11:56:32.678Z,1538999792.678 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:56:32.679Z,1538999792.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:56:32.679Z,1538999792.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T11:59:32.926Z,1538999972.926 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T11:59:32.927Z,1538999972.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-08T11:59:32.927Z,1538999972.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T11:59:32.951Z,1538999972.951 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T11:59:33.344Z,1538999973.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T11:59:33.344Z,1538999973.344 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-08T11:59:33.711Z,1538999973.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T11:59:33.712Z,1538999973.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T11:59:33.712Z,1538999973.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:00:21.772Z,1539000021.772 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T12:00:21.773Z,1539000021.773 [Default:CheckIn:C.Wait] Stopped
2018-10-08T12:00:21.773Z,1539000021.773 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T12:00:21.773Z,1539000021.773 [Default:CheckIn:D] Running Loop=1
2018-10-08T12:00:22.145Z,1539000022.145 [Default:CheckIn:D] Stopped
2018-10-08T12:00:22.145Z,1539000022.145 [Default:CheckIn:E] Running Loop=1
2018-10-08T12:00:22.525Z,1539000022.525 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 392.304232 min 
2018-10-08T12:00:22.525Z,1539000022.525 [Default:CheckIn:E] Stopped
2018-10-08T12:00:22.525Z,1539000022.525 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T12:00:22.525Z,1539000022.525 [Default:CheckIn] Stopped
2018-10-08T12:00:22.526Z,1539000022.526 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T12:00:22.526Z,1539000022.526 [Default:CheckIn](INFO): Running loop #39
2018-10-08T12:00:22.526Z,1539000022.526 [Default:CheckIn] Running Loop=39
2018-10-08T12:00:22.526Z,1539000022.526 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T12:00:22.526Z,1539000022.526 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T12:01:45.499Z,1539000105.499 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T12:01:45.499Z,1539000105.499 [NAL9602] Data Fault, FailCount= 1
2018-10-08T12:01:45.499Z,1539000105.499 [NAL9602](ERROR): Data Fault
2018-10-08T12:01:45.572Z,1539000105.572 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T12:01:45.894Z,1539000105.894 [NAL9602](INFO): Powering down
2018-10-08T12:01:46.876Z,1539000106.876 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T12:01:46.876Z,1539000106.876 [NAL9602] No Fault, FailCount= 1
2018-10-08T12:02:15.903Z,1539000135.903 [NAL9602](INFO): Powering up NAL9602
2018-10-08T12:02:27.435Z,1539000147.435 [NAL9602](INFO): NAL9602 initialized
2018-10-08T12:02:33.880Z,1539000153.880 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:02:33.880Z,1539000153.880 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-08T12:02:33.880Z,1539000153.880 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:02:33.925Z,1539000153.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:02:34.361Z,1539000154.361 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:02:34.361Z,1539000154.361 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-08T12:02:34.681Z,1539000154.681 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:02:34.681Z,1539000154.681 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:02:34.682Z,1539000154.682 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:05:22.821Z,1539000322.821 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:00:22.5Z
2018-10-08T12:05:22.821Z,1539000322.821 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T12:05:22.822Z,1539000322.822 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T12:05:27.348Z,1539000327.348 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0118.lzma
2018-10-08T12:05:28.148Z,1539000328.148 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0118.lzma.bak
2018-10-08T12:05:28.148Z,1539000328.148 [DataOverHttps](INFO): SBD MOMSN=8613837
2018-10-08T12:05:37.674Z,1539000337.674 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:05:37.674Z,1539000337.674 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-08T12:05:37.674Z,1539000337.674 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:05:37.698Z,1539000337.698 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:05:37.721Z,1539000337.721 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0119.lzma
2018-10-08T12:05:37.819Z,1539000337.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:05:37.819Z,1539000337.819 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-08T12:05:38.208Z,1539000338.208 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:05:38.209Z,1539000338.209 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:05:38.210Z,1539000338.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:05:38.512Z,1539000338.512 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0119.lzma.bak
2018-10-08T12:05:38.512Z,1539000338.512 [DataOverHttps](INFO): SBD MOMSN=8613839
2018-10-08T12:05:39.552Z,1539000339.552 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T12:05:39.552Z,1539000339.552 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T12:05:39.552Z,1539000339.552 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T12:08:38.568Z,1539000518.568 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:08:38.568Z,1539000518.568 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-08T12:08:38.568Z,1539000518.568 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:08:38.606Z,1539000518.606 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:08:38.988Z,1539000518.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:08:38.988Z,1539000518.988 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-08T12:08:39.372Z,1539000519.372 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:08:39.373Z,1539000519.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:08:39.373Z,1539000519.373 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:09:58.930Z,1539000598.930 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T12:09:58.930Z,1539000598.930 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T12:09:58.930Z,1539000598.930 [DropWeight](ERROR): Hardware Fault
2018-10-08T12:09:59.015Z,1539000599.015 [CBIT](INFO): Critical error at 20181008T120958
2018-10-08T12:09:59.022Z,1539000599.022 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T12:09:59.022Z,1539000599.022 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T12:09:59.458Z,1539000599.458 [CBIT](INFO): Critical error at 20181008T120959
2018-10-08T12:10:39.770Z,1539000639.770 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T12:10:39.770Z,1539000639.770 [Default:CheckIn:C.Wait] Stopped
2018-10-08T12:10:39.770Z,1539000639.770 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T12:10:39.770Z,1539000639.770 [Default:CheckIn:D] Running Loop=1
2018-10-08T12:10:40.172Z,1539000640.172 [Default:CheckIn:D] Stopped
2018-10-08T12:10:40.172Z,1539000640.172 [Default:CheckIn:E] Running Loop=1
2018-10-08T12:10:40.630Z,1539000640.630 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 402.604720 min 
2018-10-08T12:10:40.631Z,1539000640.631 [Default:CheckIn:E] Stopped
2018-10-08T12:10:40.631Z,1539000640.631 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T12:10:40.631Z,1539000640.631 [Default:CheckIn] Stopped
2018-10-08T12:10:40.632Z,1539000640.632 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T12:10:40.632Z,1539000640.632 [Default:CheckIn](INFO): Running loop #40
2018-10-08T12:10:40.632Z,1539000640.632 [Default:CheckIn] Running Loop=40
2018-10-08T12:10:40.632Z,1539000640.632 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T12:10:40.637Z,1539000640.637 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T12:11:38.902Z,1539000698.902 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:11:38.903Z,1539000698.903 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.904Z,1539000698.904 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:11:38.909Z,1539000698.909 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:11:38.910Z,1539000698.910 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:11:38.911Z,1539000698.911 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.911Z,1539000698.911 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.912Z,1539000698.912 [BPC1](ERROR): Battery stick #25 (s/n: 00E8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.917Z,1539000698.917 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.918Z,1539000698.918 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.919Z,1539000698.919 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.920Z,1539000698.920 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.925Z,1539000698.925 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.926Z,1539000698.926 [BPC1](ERROR): Battery stick #40 (s/n: 0095) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.927Z,1539000698.927 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:11:38.928Z,1539000698.928 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:11:38.929Z,1539000698.929 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:11:38.930Z,1539000698.930 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.931Z,1539000698.931 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:11:38.932Z,1539000698.932 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:11:38.953Z,1539000698.953 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:11:38.954Z,1539000698.954 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.955Z,1539000698.955 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:11:38.955Z,1539000698.955 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:11:38.956Z,1539000698.956 [BPC1](INFO): Calculating totals. Valid battery stick count: 34. Valid reserve battery stick count: 4.
2018-10-08T12:11:38.964Z,1539000698.964 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 22 sticks.
2018-10-08T12:11:38.964Z,1539000698.964 [BPC1] Data Fault, FailCount= 2
2018-10-08T12:11:38.964Z,1539000698.964 [BPC1](ERROR): Data Fault
2018-10-08T12:11:39.008Z,1539000699.008 [CBIT](ERROR): Data Fault in component: BPC1
2018-10-08T12:11:39.706Z,1539000699.706 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:11:39.706Z,1539000699.706 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-08T12:11:39.706Z,1539000699.706 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:11:39.732Z,1539000699.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:11:40.164Z,1539000700.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:11:40.164Z,1539000700.164 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-08T12:11:40.530Z,1539000700.530 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:11:40.531Z,1539000700.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:11:40.531Z,1539000700.531 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:12:29.562Z,1539000749.562 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T12:12:29.562Z,1539000749.562 [NAL9602] Data Fault, FailCount= 2
2018-10-08T12:12:29.562Z,1539000749.562 [NAL9602](ERROR): Data Fault
2018-10-08T12:12:29.645Z,1539000749.645 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T12:12:29.958Z,1539000749.958 [NAL9602](INFO): Powering down
2018-10-08T12:12:30.883Z,1539000750.883 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T12:12:30.883Z,1539000750.883 [NAL9602] No Fault, FailCount= 2
2018-10-08T12:13:00.254Z,1539000780.254 [NAL9602](INFO): Powering up NAL9602
2018-10-08T12:13:11.454Z,1539000791.454 [NAL9602](INFO): NAL9602 initialized
2018-10-08T12:14:40.676Z,1539000880.676 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:14:40.676Z,1539000880.676 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-08T12:14:40.676Z,1539000880.676 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:14:40.690Z,1539000880.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:14:41.089Z,1539000881.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:14:41.089Z,1539000881.089 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-08T12:14:41.476Z,1539000881.476 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:14:41.477Z,1539000881.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:14:41.477Z,1539000881.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:15:40.835Z,1539000940.835 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:10:40.6Z
2018-10-08T12:15:40.835Z,1539000940.835 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T12:15:40.835Z,1539000940.835 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T12:15:45.485Z,1539000945.485 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20181008T052431/Courier0121.lzma
2018-10-08T12:15:46.256Z,1539000946.256 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0121.lzma.bak
2018-10-08T12:15:46.256Z,1539000946.256 [DataOverHttps](INFO): SBD MOMSN=8613845
2018-10-08T12:15:55.948Z,1539000955.948 [DataOverHttps](INFO): Sending 198 bytes from file Logs/20181008T052431/Express0122.lzma
2018-10-08T12:15:56.740Z,1539000956.740 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0122.lzma.bak
2018-10-08T12:15:56.740Z,1539000956.740 [DataOverHttps](INFO): SBD MOMSN=8613847
2018-10-08T12:15:57.732Z,1539000957.732 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T12:15:57.732Z,1539000957.732 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T12:15:57.732Z,1539000957.732 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T12:17:41.668Z,1539001061.668 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:17:41.668Z,1539001061.668 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-08T12:17:41.668Z,1539001061.668 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:17:41.721Z,1539001061.721 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:17:42.115Z,1539001062.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:17:42.115Z,1539001062.115 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-08T12:17:42.466Z,1539001062.466 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:17:42.466Z,1539001062.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:17:42.467Z,1539001062.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:20:42.867Z,1539001242.867 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:20:42.867Z,1539001242.867 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-08T12:20:42.867Z,1539001242.867 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:20:42.881Z,1539001242.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:20:43.261Z,1539001243.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:20:43.261Z,1539001243.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-08T12:20:43.647Z,1539001243.647 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:20:43.647Z,1539001243.647 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:20:43.648Z,1539001243.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:20:58.094Z,1539001258.094 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T12:20:58.094Z,1539001258.094 [Default:CheckIn:C.Wait] Stopped
2018-10-08T12:20:58.095Z,1539001258.095 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T12:20:58.095Z,1539001258.095 [Default:CheckIn:D] Running Loop=1
2018-10-08T12:20:58.449Z,1539001258.449 [Default:CheckIn:D] Stopped
2018-10-08T12:20:58.449Z,1539001258.449 [Default:CheckIn:E] Running Loop=1
2018-10-08T12:20:58.837Z,1539001258.837 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 412.909310 min 
2018-10-08T12:20:58.838Z,1539001258.838 [Default:CheckIn:E] Stopped
2018-10-08T12:20:58.838Z,1539001258.838 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T12:20:58.838Z,1539001258.838 [Default:CheckIn] Stopped
2018-10-08T12:20:58.838Z,1539001258.838 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T12:20:58.838Z,1539001258.838 [Default:CheckIn](INFO): Running loop #41
2018-10-08T12:20:58.838Z,1539001258.838 [Default:CheckIn] Running Loop=41
2018-10-08T12:20:58.839Z,1539001258.839 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T12:20:58.839Z,1539001258.839 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T12:21:39.870Z,1539001299.870 [CBIT](INFO): Clearing failed state for component BPC1
2018-10-08T12:21:39.870Z,1539001299.870 [BPC1] No Fault, FailCount= 2
2018-10-08T12:23:13.630Z,1539001393.630 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T12:23:13.630Z,1539001393.630 [NAL9602] Data Fault, FailCount= 3
2018-10-08T12:23:13.631Z,1539001393.631 [NAL9602](ERROR): Data Fault
2018-10-08T12:23:13.712Z,1539001393.712 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T12:23:14.031Z,1539001394.031 [NAL9602](INFO): Powering down
2018-10-08T12:23:14.985Z,1539001394.985 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T12:23:14.985Z,1539001394.985 [NAL9602] No Fault, FailCount= 3
2018-10-08T12:23:43.681Z,1539001423.681 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:23:43.682Z,1539001423.682 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-08T12:23:43.682Z,1539001423.682 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:23:43.703Z,1539001423.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:23:44.096Z,1539001424.096 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:23:44.097Z,1539001424.097 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-08T12:23:44.426Z,1539001424.426 [NAL9602](INFO): Powering up NAL9602
2018-10-08T12:23:44.486Z,1539001424.486 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:23:44.487Z,1539001424.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:23:44.487Z,1539001424.487 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:23:55.226Z,1539001435.226 [NAL9602](INFO): NAL9602 initialized
2018-10-08T12:24:59.217Z,1539001499.217 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T12:24:59.217Z,1539001499.217 [DropWeight] No Fault, FailCount= 1
2018-10-08T12:25:59.056Z,1539001559.056 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:20:58.8Z
2018-10-08T12:25:59.056Z,1539001559.056 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T12:25:59.056Z,1539001559.056 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T12:26:03.723Z,1539001563.723 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0124.lzma
2018-10-08T12:26:04.492Z,1539001564.492 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0124.lzma.bak
2018-10-08T12:26:04.492Z,1539001564.492 [DataOverHttps](INFO): SBD MOMSN=8613853
2018-10-08T12:26:14.011Z,1539001574.011 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0125.lzma
2018-10-08T12:26:15.416Z,1539001575.416 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0125.lzma.bak
2018-10-08T12:26:15.416Z,1539001575.416 [DataOverHttps](INFO): SBD MOMSN=8613855
2018-10-08T12:26:16.290Z,1539001576.290 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T12:26:16.291Z,1539001576.291 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T12:26:16.291Z,1539001576.291 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T12:26:44.668Z,1539001604.668 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:26:44.668Z,1539001604.668 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-08T12:26:44.668Z,1539001604.668 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:26:44.729Z,1539001604.729 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:26:45.111Z,1539001605.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:26:45.111Z,1539001605.111 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-08T12:26:45.439Z,1539001605.439 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:26:45.440Z,1539001605.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:26:45.440Z,1539001605.440 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:29:45.766Z,1539001785.766 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:29:45.766Z,1539001785.766 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-08T12:29:45.766Z,1539001785.766 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:29:45.780Z,1539001785.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:29:46.165Z,1539001786.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:29:46.165Z,1539001786.165 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-08T12:29:46.547Z,1539001786.547 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:29:46.547Z,1539001786.547 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:29:46.548Z,1539001786.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:31:16.532Z,1539001876.532 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T12:31:16.533Z,1539001876.533 [Default:CheckIn:C.Wait] Stopped
2018-10-08T12:31:16.533Z,1539001876.533 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T12:31:16.533Z,1539001876.533 [Default:CheckIn:D] Running Loop=1
2018-10-08T12:31:16.927Z,1539001876.927 [Default:CheckIn:D] Stopped
2018-10-08T12:31:16.927Z,1539001876.927 [Default:CheckIn:E] Running Loop=1
2018-10-08T12:31:17.323Z,1539001877.323 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 423.217285 min 
2018-10-08T12:31:17.323Z,1539001877.323 [Default:CheckIn:E] Stopped
2018-10-08T12:31:17.323Z,1539001877.323 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T12:31:17.323Z,1539001877.323 [Default:CheckIn] Stopped
2018-10-08T12:31:17.323Z,1539001877.323 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T12:31:17.324Z,1539001877.324 [Default:CheckIn](INFO): Running loop #42
2018-10-08T12:31:17.324Z,1539001877.324 [Default:CheckIn] Running Loop=42
2018-10-08T12:31:17.324Z,1539001877.324 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T12:31:17.324Z,1539001877.324 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T12:32:46.817Z,1539001966.817 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:32:46.817Z,1539001966.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-08T12:32:46.817Z,1539001966.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:32:46.846Z,1539001966.846 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:32:47.227Z,1539001967.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:32:47.227Z,1539001967.227 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-08T12:32:47.612Z,1539001967.612 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:32:47.617Z,1539001967.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:32:47.617Z,1539001967.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:33:56.263Z,1539002036.263 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T12:33:56.263Z,1539002036.263 [NAL9602] Data Fault, FailCount= 4
2018-10-08T12:33:56.263Z,1539002036.263 [NAL9602](ERROR): Data Fault
2018-10-08T12:33:56.354Z,1539002036.354 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T12:33:56.658Z,1539002036.658 [NAL9602](INFO): Powering down
2018-10-08T12:33:57.525Z,1539002037.525 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T12:33:57.525Z,1539002037.525 [NAL9602] No Fault, FailCount= 4
2018-10-08T12:34:26.848Z,1539002066.848 [NAL9602](INFO): Powering up NAL9602
2018-10-08T12:34:38.043Z,1539002078.043 [NAL9602](INFO): NAL9602 initialized
2018-10-08T12:35:47.869Z,1539002147.869 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:35:47.870Z,1539002147.870 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-08T12:35:47.870Z,1539002147.870 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:35:47.895Z,1539002147.895 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:35:48.318Z,1539002148.318 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:35:48.318Z,1539002148.318 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-08T12:35:48.677Z,1539002148.677 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:35:48.677Z,1539002148.677 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:35:48.678Z,1539002148.678 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:36:17.479Z,1539002177.479 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:31:17.3Z
2018-10-08T12:36:17.479Z,1539002177.479 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T12:36:17.479Z,1539002177.479 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T12:36:22.539Z,1539002182.539 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0127.lzma
2018-10-08T12:36:23.320Z,1539002183.320 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0127.lzma.bak
2018-10-08T12:36:23.320Z,1539002183.320 [DataOverHttps](INFO): SBD MOMSN=8613861
2018-10-08T12:36:33.165Z,1539002193.165 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0128.lzma
2018-10-08T12:36:33.952Z,1539002193.952 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0128.lzma.bak
2018-10-08T12:36:33.952Z,1539002193.952 [DataOverHttps](INFO): SBD MOMSN=8613863
2018-10-08T12:36:35.137Z,1539002195.137 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T12:36:35.137Z,1539002195.137 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T12:36:35.137Z,1539002195.137 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T12:38:49.046Z,1539002329.046 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:38:49.046Z,1539002329.046 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-08T12:38:49.047Z,1539002329.047 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:38:49.076Z,1539002329.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:38:49.475Z,1539002329.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:38:49.475Z,1539002329.475 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-08T12:38:49.828Z,1539002329.828 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:38:49.828Z,1539002329.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:38:49.829Z,1539002329.829 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:41:35.584Z,1539002495.584 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T12:41:35.585Z,1539002495.585 [Default:CheckIn:C.Wait] Stopped
2018-10-08T12:41:35.585Z,1539002495.585 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T12:41:35.585Z,1539002495.585 [Default:CheckIn:D] Running Loop=1
2018-10-08T12:41:35.989Z,1539002495.989 [Default:CheckIn:D] Stopped
2018-10-08T12:41:35.989Z,1539002495.989 [Default:CheckIn:E] Running Loop=1
2018-10-08T12:41:36.391Z,1539002496.391 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 433.534993 min 
2018-10-08T12:41:36.391Z,1539002496.391 [Default:CheckIn:E] Stopped
2018-10-08T12:41:36.392Z,1539002496.392 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T12:41:36.392Z,1539002496.392 [Default:CheckIn] Stopped
2018-10-08T12:41:36.392Z,1539002496.392 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T12:41:36.392Z,1539002496.392 [Default:CheckIn](INFO): Running loop #43
2018-10-08T12:41:36.392Z,1539002496.392 [Default:CheckIn] Running Loop=43
2018-10-08T12:41:36.392Z,1539002496.392 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T12:41:36.392Z,1539002496.392 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T12:41:50.242Z,1539002510.242 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:41:50.242Z,1539002510.242 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-08T12:41:50.242Z,1539002510.242 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:41:50.283Z,1539002510.283 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:41:50.284Z,1539002510.284 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:44:40.957Z,1539002680.957 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T12:44:40.957Z,1539002680.957 [NAL9602] Data Fault, FailCount= 5
2018-10-08T12:44:40.957Z,1539002680.957 [NAL9602](ERROR): Data Fault
2018-10-08T12:44:41.048Z,1539002681.048 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T12:44:41.053Z,1539002681.053 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T12:44:41.302Z,1539002681.302 [NAL9602](INFO): Powering down
2018-10-08T12:44:41.399Z,1539002681.399 [CBIT](INFO): Critical error at 20181008T124441
2018-10-08T12:46:36.468Z,1539002796.468 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:41:36.4Z
2018-10-08T12:46:36.468Z,1539002796.468 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T12:46:36.468Z,1539002796.468 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T12:46:41.153Z,1539002801.153 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T12:46:41.153Z,1539002801.153 [NAL9602] No Fault, FailCount= 5
2018-10-08T12:46:41.181Z,1539002801.181 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181008T052431/Courier0130.lzma
2018-10-08T12:46:41.244Z,1539002801.244 [NAL9602](INFO): Powering up NAL9602
2018-10-08T12:46:41.964Z,1539002801.964 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0130.lzma.bak
2018-10-08T12:46:41.964Z,1539002801.964 [DataOverHttps](INFO): SBD MOMSN=8613869
2018-10-08T12:46:51.736Z,1539002811.736 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20181008T052431/Express0131.lzma
2018-10-08T12:46:52.149Z,1539002812.149 [NAL9602](INFO): NAL9602 initialized
2018-10-08T12:46:52.524Z,1539002812.524 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0131.lzma.bak
2018-10-08T12:46:52.524Z,1539002812.524 [DataOverHttps](INFO): SBD MOMSN=8613871
2018-10-08T12:46:53.523Z,1539002813.523 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T12:46:53.523Z,1539002813.523 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T12:46:53.523Z,1539002813.523 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T12:51:26.078Z,1539003086.078 [BPC1](ERROR): BPC1B: No match for serial number FF91 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).
2018-10-08T12:51:53.683Z,1539003113.683 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T12:51:53.684Z,1539003113.684 [Default:CheckIn:C.Wait] Stopped
2018-10-08T12:51:53.684Z,1539003113.684 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T12:51:53.684Z,1539003113.684 [Default:CheckIn:D] Running Loop=1
2018-10-08T12:51:54.092Z,1539003114.092 [Default:CheckIn:D] Stopped
2018-10-08T12:51:54.092Z,1539003114.092 [Default:CheckIn:E] Running Loop=1
2018-10-08T12:51:54.539Z,1539003114.539 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 443.836686 min 
2018-10-08T12:51:54.540Z,1539003114.540 [Default:CheckIn:E] Stopped
2018-10-08T12:51:54.540Z,1539003114.540 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T12:51:54.540Z,1539003114.540 [Default:CheckIn] Stopped
2018-10-08T12:51:54.540Z,1539003114.540 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T12:51:54.540Z,1539003114.540 [Default:CheckIn](INFO): Running loop #44
2018-10-08T12:51:54.540Z,1539003114.540 [Default:CheckIn] Running Loop=44
2018-10-08T12:51:54.545Z,1539003114.545 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T12:51:54.545Z,1539003114.545 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T12:52:40.656Z,1539003160.656 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:52:40.678Z,1539003160.678 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.679Z,1539003160.679 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:52:40.689Z,1539003160.689 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:52:40.692Z,1539003160.692 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:52:40.694Z,1539003160.694 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.696Z,1539003160.696 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.702Z,1539003160.702 [BPC1](ERROR): Battery stick #25 (s/n: 00E8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.704Z,1539003160.704 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.710Z,1539003160.710 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.711Z,1539003160.711 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.719Z,1539003160.719 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.720Z,1539003160.720 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.726Z,1539003160.726 [BPC1](ERROR): Battery stick #40 (s/n: 0095) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.727Z,1539003160.727 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:52:40.733Z,1539003160.733 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:52:40.735Z,1539003160.735 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:52:40.742Z,1539003160.742 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.744Z,1539003160.744 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:52:40.750Z,1539003160.750 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T12:52:40.752Z,1539003160.752 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:52:40.758Z,1539003160.758 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.760Z,1539003160.760 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T12:52:40.774Z,1539003160.774 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T12:52:40.775Z,1539003160.775 [BPC1](INFO): Calculating totals. Valid battery stick count: 34. Valid reserve battery stick count: 4.
2018-10-08T12:52:40.789Z,1539003160.789 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 23 sticks.
2018-10-08T12:52:40.790Z,1539003160.790 [BPC1] Data Fault, FailCount= 3
2018-10-08T12:52:40.790Z,1539003160.790 [BPC1](ERROR): Data Fault
2018-10-08T12:52:40.862Z,1539003160.862 [CBIT](ERROR): Data Fault in component: BPC1
2018-10-08T12:55:00.722Z,1539003300.722 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T12:55:00.723Z,1539003300.723 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T12:55:00.723Z,1539003300.723 [DropWeight](ERROR): Hardware Fault
2018-10-08T12:55:00.856Z,1539003300.856 [CBIT](INFO): Critical error at 20181008T125500
2018-10-08T12:55:00.863Z,1539003300.863 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T12:55:00.863Z,1539003300.863 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T12:55:01.201Z,1539003301.201 [CBIT](INFO): Critical error at 20181008T125500
2018-10-08T12:56:50.327Z,1539003410.327 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:56:50.327Z,1539003410.327 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-08T12:56:50.731Z,1539003410.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:56:50.732Z,1539003410.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:56:50.733Z,1539003410.733 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T12:56:54.718Z,1539003414.718 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T12:51:54.5Z
2018-10-08T12:56:54.718Z,1539003414.718 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T12:56:54.718Z,1539003414.718 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T12:56:55.854Z,1539003415.854 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T12:56:55.854Z,1539003415.854 [NAL9602] Data Fault, FailCount= 1
2018-10-08T12:56:55.855Z,1539003415.855 [NAL9602](ERROR): Data Fault
2018-10-08T12:56:55.942Z,1539003415.942 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T12:56:59.188Z,1539003419.188 [NAL9602](INFO): Powering down
2018-10-08T12:56:59.290Z,1539003419.290 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20181008T052431/Courier0133.lzma
2018-10-08T12:56:59.789Z,1539003419.789 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T12:56:59.789Z,1539003419.789 [NAL9602] No Fault, FailCount= 1
2018-10-08T12:57:00.094Z,1539003420.094 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0133.lzma.bak
2018-10-08T12:57:00.094Z,1539003420.094 [DataOverHttps](INFO): SBD MOMSN=8613877
2018-10-08T12:57:09.650Z,1539003429.650 [DataOverHttps](INFO): Sending 167 bytes from file Logs/20181008T052431/Express0134.lzma
2018-10-08T12:57:10.417Z,1539003430.417 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0134.lzma.bak
2018-10-08T12:57:10.417Z,1539003430.417 [DataOverHttps](INFO): SBD MOMSN=8613879
2018-10-08T12:57:11.412Z,1539003431.412 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T12:57:11.412Z,1539003431.412 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T12:57:11.412Z,1539003431.412 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T12:57:29.346Z,1539003449.346 [NAL9602](INFO): Powering up NAL9602
2018-10-08T12:57:40.546Z,1539003460.546 [NAL9602](INFO): NAL9602 initialized
2018-10-08T12:59:51.039Z,1539003591.039 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T12:59:51.039Z,1539003591.039 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T12:59:51.039Z,1539003591.039 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T12:59:51.053Z,1539003591.053 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T12:59:51.436Z,1539003591.436 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T12:59:51.436Z,1539003591.436 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T12:59:51.834Z,1539003591.834 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T12:59:51.835Z,1539003591.835 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T12:59:51.835Z,1539003591.835 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:02:11.789Z,1539003731.789 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T13:02:11.789Z,1539003731.789 [Default:CheckIn:C.Wait] Stopped
2018-10-08T13:02:11.789Z,1539003731.789 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T13:02:11.790Z,1539003731.790 [Default:CheckIn:D] Running Loop=1
2018-10-08T13:02:12.190Z,1539003732.190 [Default:CheckIn:D] Stopped
2018-10-08T13:02:12.190Z,1539003732.190 [Default:CheckIn:E] Running Loop=1
2018-10-08T13:02:12.604Z,1539003732.604 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 454.138346 min 
2018-10-08T13:02:12.604Z,1539003732.604 [Default:CheckIn:E] Stopped
2018-10-08T13:02:12.604Z,1539003732.604 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T13:02:12.604Z,1539003732.604 [Default:CheckIn] Stopped
2018-10-08T13:02:12.604Z,1539003732.604 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T13:02:12.606Z,1539003732.606 [Default:CheckIn](INFO): Running loop #45
2018-10-08T13:02:12.606Z,1539003732.606 [Default:CheckIn] Running Loop=45
2018-10-08T13:02:12.606Z,1539003732.606 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T13:02:12.606Z,1539003732.606 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T13:02:41.741Z,1539003761.741 [CBIT](INFO): Clearing failed state for component BPC1
2018-10-08T13:02:41.741Z,1539003761.741 [BPC1] No Fault, FailCount= 3
2018-10-08T13:02:52.114Z,1539003772.114 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:02:52.114Z,1539003772.114 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-08T13:02:52.114Z,1539003772.114 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:02:52.128Z,1539003772.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:02:52.564Z,1539003772.564 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:02:52.564Z,1539003772.564 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-08T13:02:52.932Z,1539003772.932 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:02:52.933Z,1539003772.933 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:02:52.933Z,1539003772.933 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:04:03.262Z,1539003843.262 [BPC1](ERROR): BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).
2018-10-08T13:04:56.520Z,1539003896.520 [BPC1](ERROR): BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-32 in onboard configuration file).
2018-10-08T13:05:53.313Z,1539003953.313 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:05:53.313Z,1539003953.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-08T13:05:53.313Z,1539003953.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:05:53.351Z,1539003953.351 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:05:53.744Z,1539003953.744 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:05:53.744Z,1539003953.744 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-08T13:05:54.127Z,1539003954.127 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:05:54.127Z,1539003954.127 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:05:54.128Z,1539003954.128 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:07:12.689Z,1539004032.689 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:02:12.6Z
2018-10-08T13:07:12.690Z,1539004032.690 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T13:07:12.690Z,1539004032.690 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T13:07:17.304Z,1539004037.304 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0136.lzma
2018-10-08T13:07:18.100Z,1539004038.100 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0136.lzma.bak
2018-10-08T13:07:18.101Z,1539004038.101 [DataOverHttps](INFO): SBD MOMSN=8613885
2018-10-08T13:07:27.670Z,1539004047.670 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0137.lzma
2018-10-08T13:07:28.456Z,1539004048.456 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0137.lzma.bak
2018-10-08T13:07:28.456Z,1539004048.456 [DataOverHttps](INFO): SBD MOMSN=8613887
2018-10-08T13:07:29.478Z,1539004049.478 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T13:07:29.478Z,1539004049.478 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T13:07:29.478Z,1539004049.478 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T13:07:41.894Z,1539004061.894 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T13:07:41.894Z,1539004061.894 [NAL9602] Data Fault, FailCount= 2
2018-10-08T13:07:41.894Z,1539004061.894 [NAL9602](ERROR): Data Fault
2018-10-08T13:07:41.961Z,1539004061.961 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T13:07:42.286Z,1539004062.286 [NAL9602](INFO): Powering down
2018-10-08T13:07:43.138Z,1539004063.138 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T13:07:43.139Z,1539004063.139 [NAL9602] No Fault, FailCount= 2
2018-10-08T13:08:12.303Z,1539004092.303 [NAL9602](INFO): Powering up NAL9602
2018-10-08T13:08:23.486Z,1539004103.486 [NAL9602](INFO): NAL9602 initialized
2018-10-08T13:08:40.717Z,1539004120.717 [BPC1](ERROR): BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-63 in onboard configuration file).
2018-10-08T13:08:54.360Z,1539004134.360 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:08:54.360Z,1539004134.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-08T13:08:54.365Z,1539004134.365 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:08:54.391Z,1539004134.391 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:08:54.765Z,1539004134.765 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:08:54.765Z,1539004134.765 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-08T13:08:55.138Z,1539004135.138 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:08:55.139Z,1539004135.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:08:55.139Z,1539004135.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:10:00.962Z,1539004200.962 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T13:10:00.962Z,1539004200.962 [DropWeight] No Fault, FailCount= 1
2018-10-08T13:11:55.460Z,1539004315.460 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:11:55.460Z,1539004315.460 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-08T13:11:55.460Z,1539004315.460 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:11:55.473Z,1539004315.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:11:55.868Z,1539004315.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:11:55.868Z,1539004315.868 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-08T13:11:56.308Z,1539004316.308 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:11:56.314Z,1539004316.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:11:56.314Z,1539004316.314 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:12:29.843Z,1539004349.843 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T13:12:29.844Z,1539004349.844 [Default:CheckIn:C.Wait] Stopped
2018-10-08T13:12:29.844Z,1539004349.844 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T13:12:29.844Z,1539004349.844 [Default:CheckIn:D] Running Loop=1
2018-10-08T13:12:30.249Z,1539004350.249 [Default:CheckIn:D] Stopped
2018-10-08T13:12:30.249Z,1539004350.249 [Default:CheckIn:E] Running Loop=1
2018-10-08T13:12:30.712Z,1539004350.712 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 464.439323 min 
2018-10-08T13:12:30.717Z,1539004350.717 [Default:CheckIn:E] Stopped
2018-10-08T13:12:30.718Z,1539004350.718 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T13:12:30.718Z,1539004350.718 [Default:CheckIn] Stopped
2018-10-08T13:12:30.718Z,1539004350.718 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T13:12:30.719Z,1539004350.719 [Default:CheckIn](INFO): Running loop #46
2018-10-08T13:12:30.719Z,1539004350.719 [Default:CheckIn] Running Loop=46
2018-10-08T13:12:30.719Z,1539004350.719 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T13:12:30.720Z,1539004350.720 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T13:14:56.620Z,1539004496.620 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:14:56.620Z,1539004496.620 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-08T13:14:56.620Z,1539004496.620 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:14:56.641Z,1539004496.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:14:57.021Z,1539004497.021 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:14:57.021Z,1539004497.021 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-08T13:14:57.423Z,1539004497.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:14:57.423Z,1539004497.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:14:57.423Z,1539004497.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:17:30.793Z,1539004650.793 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:12:30.7Z
2018-10-08T13:17:30.793Z,1539004650.793 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T13:17:30.793Z,1539004650.793 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T13:17:35.411Z,1539004655.411 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0139.lzma
2018-10-08T13:17:36.212Z,1539004656.212 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0139.lzma.bak
2018-10-08T13:17:36.212Z,1539004656.212 [DataOverHttps](INFO): SBD MOMSN=8613893
2018-10-08T13:17:45.967Z,1539004665.967 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0140.lzma
2018-10-08T13:17:46.763Z,1539004666.763 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0140.lzma.bak
2018-10-08T13:17:46.763Z,1539004666.763 [DataOverHttps](INFO): SBD MOMSN=8613895
2018-10-08T13:17:47.773Z,1539004667.773 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T13:17:47.773Z,1539004667.773 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T13:17:47.774Z,1539004667.774 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T13:17:57.449Z,1539004677.449 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:17:57.449Z,1539004677.449 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-08T13:17:57.449Z,1539004677.449 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:17:57.500Z,1539004677.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:17:57.913Z,1539004677.913 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:17:57.913Z,1539004677.913 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-08T13:17:58.293Z,1539004678.293 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:17:58.293Z,1539004678.293 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:17:58.294Z,1539004678.294 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:18:24.575Z,1539004704.575 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T13:18:24.575Z,1539004704.575 [NAL9602] Data Fault, FailCount= 3
2018-10-08T13:18:24.575Z,1539004704.575 [NAL9602](ERROR): Data Fault
2018-10-08T13:18:24.660Z,1539004704.660 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T13:18:24.970Z,1539004704.970 [NAL9602](INFO): Powering down
2018-10-08T13:18:25.848Z,1539004705.848 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T13:18:25.848Z,1539004705.848 [NAL9602] No Fault, FailCount= 3
2018-10-08T13:18:55.279Z,1539004735.279 [NAL9602](INFO): Powering up NAL9602
2018-10-08T13:19:06.479Z,1539004746.479 [NAL9602](INFO): NAL9602 initialized
2018-10-08T13:20:58.535Z,1539004858.535 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:20:58.536Z,1539004858.536 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-08T13:20:58.536Z,1539004858.536 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:20:58.566Z,1539004858.566 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:20:59.018Z,1539004859.018 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:20:59.018Z,1539004859.018 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-08T13:20:59.358Z,1539004859.358 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:20:59.358Z,1539004859.358 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:20:59.358Z,1539004859.358 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:22:48.150Z,1539004968.150 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T13:22:48.150Z,1539004968.150 [Default:CheckIn:C.Wait] Stopped
2018-10-08T13:22:48.151Z,1539004968.151 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T13:22:48.151Z,1539004968.151 [Default:CheckIn:D] Running Loop=1
2018-10-08T13:22:48.524Z,1539004968.524 [Default:CheckIn:D] Stopped
2018-10-08T13:22:48.524Z,1539004968.524 [Default:CheckIn:E] Running Loop=1
2018-10-08T13:22:48.931Z,1539004968.931 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 474.743913 min 
2018-10-08T13:22:48.932Z,1539004968.932 [Default:CheckIn:E] Stopped
2018-10-08T13:22:48.932Z,1539004968.932 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T13:22:48.932Z,1539004968.932 [Default:CheckIn] Stopped
2018-10-08T13:22:48.932Z,1539004968.932 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T13:22:48.932Z,1539004968.932 [Default:CheckIn](INFO): Running loop #47
2018-10-08T13:22:48.932Z,1539004968.932 [Default:CheckIn] Running Loop=47
2018-10-08T13:22:48.932Z,1539004968.932 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T13:22:48.933Z,1539004968.933 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T13:23:59.665Z,1539005039.665 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:23:59.665Z,1539005039.665 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-08T13:23:59.665Z,1539005039.665 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:23:59.695Z,1539005039.695 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:24:00.151Z,1539005040.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:24:00.151Z,1539005040.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-08T13:24:00.467Z,1539005040.467 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:24:00.467Z,1539005040.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:24:00.468Z,1539005040.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:27:00.863Z,1539005220.863 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:27:00.863Z,1539005220.863 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-08T13:27:00.863Z,1539005220.863 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:27:00.886Z,1539005220.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:27:01.269Z,1539005221.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:27:01.269Z,1539005221.269 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-08T13:27:01.660Z,1539005221.660 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:27:01.661Z,1539005221.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:27:01.661Z,1539005221.661 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:27:49.263Z,1539005269.263 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:22:48.9Z
2018-10-08T13:27:49.263Z,1539005269.263 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T13:27:49.263Z,1539005269.263 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T13:27:54.957Z,1539005274.957 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0142.lzma
2018-10-08T13:27:55.736Z,1539005275.736 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0142.lzma.bak
2018-10-08T13:27:55.736Z,1539005275.736 [DataOverHttps](INFO): SBD MOMSN=8613901
2018-10-08T13:28:11.071Z,1539005291.071 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0143.lzma
2018-10-08T13:28:11.872Z,1539005291.872 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0143.lzma.bak
2018-10-08T13:28:11.872Z,1539005291.872 [DataOverHttps](INFO): SBD MOMSN=8613903
2018-10-08T13:28:12.891Z,1539005292.891 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T13:28:12.891Z,1539005292.891 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T13:28:12.891Z,1539005292.891 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T13:29:07.659Z,1539005347.659 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T13:29:07.659Z,1539005347.659 [NAL9602] Data Fault, FailCount= 4
2018-10-08T13:29:07.659Z,1539005347.659 [NAL9602](ERROR): Data Fault
2018-10-08T13:29:07.757Z,1539005347.757 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T13:29:08.059Z,1539005348.059 [NAL9602](INFO): Powering down
2018-10-08T13:29:08.920Z,1539005348.920 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T13:29:08.920Z,1539005348.920 [NAL9602] No Fault, FailCount= 4
2018-10-08T13:29:38.286Z,1539005378.286 [NAL9602](INFO): Powering up NAL9602
2018-10-08T13:29:49.487Z,1539005389.487 [NAL9602](INFO): NAL9602 initialized
2018-10-08T13:30:02.065Z,1539005402.065 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:30:02.066Z,1539005402.066 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-08T13:30:02.066Z,1539005402.066 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:30:02.111Z,1539005402.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:30:02.378Z,1539005402.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:30:02.378Z,1539005402.378 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-08T13:30:02.753Z,1539005402.753 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:30:02.753Z,1539005402.753 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:30:02.754Z,1539005402.754 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:33:02.812Z,1539005582.812 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:33:02.812Z,1539005582.812 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-08T13:33:02.812Z,1539005582.812 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:33:02.886Z,1539005582.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:33:03.180Z,1539005583.180 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:33:03.180Z,1539005583.180 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-08T13:33:03.582Z,1539005583.582 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:33:03.582Z,1539005583.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:33:03.582Z,1539005583.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:33:13.133Z,1539005593.133 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T13:33:13.133Z,1539005593.133 [Default:CheckIn:C.Wait] Stopped
2018-10-08T13:33:13.133Z,1539005593.133 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T13:33:13.133Z,1539005593.133 [Default:CheckIn:D] Running Loop=1
2018-10-08T13:33:13.549Z,1539005593.549 [Default:CheckIn:D] Stopped
2018-10-08T13:33:13.549Z,1539005593.549 [Default:CheckIn:E] Running Loop=1
2018-10-08T13:33:13.923Z,1539005593.923 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 485.161003 min 
2018-10-08T13:33:13.924Z,1539005593.924 [Default:CheckIn:E] Stopped
2018-10-08T13:33:13.924Z,1539005593.924 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T13:33:13.924Z,1539005593.924 [Default:CheckIn] Stopped
2018-10-08T13:33:13.924Z,1539005593.924 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T13:33:13.924Z,1539005593.924 [Default:CheckIn](INFO): Running loop #48
2018-10-08T13:33:13.924Z,1539005593.924 [Default:CheckIn] Running Loop=48
2018-10-08T13:33:13.924Z,1539005593.924 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T13:33:13.925Z,1539005593.925 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T13:33:42.612Z,1539005622.612 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T13:33:42.613Z,1539005622.613 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.614Z,1539005622.614 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T13:33:42.615Z,1539005622.615 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T13:33:42.616Z,1539005622.616 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T13:33:42.617Z,1539005622.617 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.618Z,1539005622.618 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.619Z,1539005622.619 [BPC1](ERROR): Battery stick #25 (s/n: 00E8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.619Z,1539005622.619 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.620Z,1539005622.620 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.642Z,1539005622.642 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.644Z,1539005622.644 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.650Z,1539005622.650 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.652Z,1539005622.652 [BPC1](ERROR): Battery stick #40 (s/n: 0095) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.662Z,1539005622.662 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T13:33:42.664Z,1539005622.664 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T13:33:42.666Z,1539005622.666 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T13:33:42.667Z,1539005622.667 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.668Z,1539005622.668 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T13:33:42.669Z,1539005622.669 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T13:33:42.670Z,1539005622.670 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T13:33:42.671Z,1539005622.671 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.672Z,1539005622.672 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T13:33:42.697Z,1539005622.697 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T13:33:42.698Z,1539005622.698 [BPC1](INFO): Calculating totals. Valid battery stick count: 34. Valid reserve battery stick count: 4.
2018-10-08T13:33:42.702Z,1539005622.702 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 24 sticks.
2018-10-08T13:33:42.702Z,1539005622.702 [BPC1] Data Fault, FailCount= 4
2018-10-08T13:33:42.702Z,1539005622.702 [BPC1](ERROR): Data Fault
2018-10-08T13:33:42.808Z,1539005622.808 [CBIT](ERROR): Data Fault in component: BPC1
2018-10-08T13:36:03.727Z,1539005763.727 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:36:03.727Z,1539005763.727 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-08T13:36:03.727Z,1539005763.727 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:36:03.741Z,1539005763.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:36:04.135Z,1539005764.135 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:36:04.135Z,1539005764.135 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-08T13:36:04.526Z,1539005764.526 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:36:04.527Z,1539005764.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:36:04.527Z,1539005764.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:38:14.236Z,1539005894.236 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:33:13.9Z
2018-10-08T13:38:14.236Z,1539005894.236 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T13:38:14.236Z,1539005894.236 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T13:38:18.931Z,1539005898.931 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T052431/Courier0145.lzma
2018-10-08T13:38:19.724Z,1539005899.724 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0145.lzma.bak
2018-10-08T13:38:19.724Z,1539005899.724 [DataOverHttps](INFO): SBD MOMSN=8613909
2018-10-08T13:38:29.252Z,1539005909.252 [DataOverHttps](INFO): Sending 198 bytes from file Logs/20181008T052431/Express0146.lzma
2018-10-08T13:38:30.054Z,1539005910.054 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0146.lzma.bak
2018-10-08T13:38:30.054Z,1539005910.054 [DataOverHttps](INFO): SBD MOMSN=8613911
2018-10-08T13:38:31.072Z,1539005911.072 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T13:38:31.072Z,1539005911.072 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T13:38:31.072Z,1539005911.072 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T13:39:04.822Z,1539005944.822 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:39:04.822Z,1539005944.822 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-08T13:39:04.822Z,1539005944.822 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:39:04.859Z,1539005944.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:39:05.263Z,1539005945.263 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:39:05.263Z,1539005945.263 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-08T13:39:05.632Z,1539005945.632 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:39:05.637Z,1539005945.637 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:39:05.637Z,1539005945.637 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:39:51.867Z,1539005991.867 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T13:39:51.867Z,1539005991.867 [NAL9602] Data Fault, FailCount= 5
2018-10-08T13:39:51.867Z,1539005991.867 [NAL9602](ERROR): Data Fault
2018-10-08T13:39:51.964Z,1539005991.964 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T13:39:51.964Z,1539005991.964 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T13:39:52.266Z,1539005992.266 [NAL9602](INFO): Powering down
2018-10-08T13:39:52.328Z,1539005992.328 [CBIT](INFO): Critical error at 20181008T133951
2018-10-08T13:40:02.267Z,1539006002.267 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T13:40:02.267Z,1539006002.267 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T13:40:02.267Z,1539006002.267 [DropWeight](ERROR): Hardware Fault
2018-10-08T13:40:02.335Z,1539006002.335 [CBIT](INFO): Critical error at 20181008T134002
2018-10-08T13:40:02.342Z,1539006002.342 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T13:40:02.342Z,1539006002.342 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T13:40:02.791Z,1539006002.791 [CBIT](INFO): Critical error at 20181008T134002
2018-10-08T13:41:52.222Z,1539006112.222 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T13:41:52.222Z,1539006112.222 [NAL9602] No Fault, FailCount= 5
2018-10-08T13:41:52.566Z,1539006112.566 [NAL9602](INFO): Powering up NAL9602
2018-10-08T13:42:03.766Z,1539006123.766 [NAL9602](INFO): NAL9602 initialized
2018-10-08T13:42:05.809Z,1539006125.809 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:42:05.809Z,1539006125.809 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-08T13:42:05.809Z,1539006125.809 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:42:05.823Z,1539006125.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:42:06.238Z,1539006126.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:42:06.238Z,1539006126.238 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-08T13:42:06.640Z,1539006126.640 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:42:06.640Z,1539006126.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:42:06.650Z,1539006126.650 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:43:31.580Z,1539006211.580 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T13:43:31.581Z,1539006211.581 [Default:CheckIn:C.Wait] Stopped
2018-10-08T13:43:31.581Z,1539006211.581 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T13:43:31.581Z,1539006211.581 [Default:CheckIn:D] Running Loop=1
2018-10-08T13:43:31.989Z,1539006211.989 [Default:CheckIn:D] Stopped
2018-10-08T13:43:31.989Z,1539006211.989 [Default:CheckIn:E] Running Loop=1
2018-10-08T13:43:32.387Z,1539006212.387 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 495.468327 min 
2018-10-08T13:43:32.387Z,1539006212.387 [Default:CheckIn:E] Stopped
2018-10-08T13:43:32.388Z,1539006212.388 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T13:43:32.388Z,1539006212.388 [Default:CheckIn] Stopped
2018-10-08T13:43:32.388Z,1539006212.388 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T13:43:32.388Z,1539006212.388 [Default:CheckIn](INFO): Running loop #49
2018-10-08T13:43:32.388Z,1539006212.388 [Default:CheckIn] Running Loop=49
2018-10-08T13:43:32.388Z,1539006212.388 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T13:43:32.388Z,1539006212.388 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T13:43:43.796Z,1539006223.796 [CBIT](INFO): Clearing failed state for component BPC1
2018-10-08T13:43:43.796Z,1539006223.796 [BPC1] No Fault, FailCount= 4
2018-10-08T13:45:06.748Z,1539006306.748 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:45:06.748Z,1539006306.748 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-08T13:45:06.748Z,1539006306.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:45:06.762Z,1539006306.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:45:07.164Z,1539006307.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:45:07.164Z,1539006307.164 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-08T13:45:07.548Z,1539006307.548 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:45:07.548Z,1539006307.548 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:45:07.549Z,1539006307.549 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:48:07.655Z,1539006487.655 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:48:07.656Z,1539006487.656 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-08T13:48:07.656Z,1539006487.656 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:48:07.669Z,1539006487.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:48:08.064Z,1539006488.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:48:08.064Z,1539006488.064 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-08T13:48:08.442Z,1539006488.442 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:48:08.443Z,1539006488.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:48:08.443Z,1539006488.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:48:32.420Z,1539006512.420 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:43:32.4Z
2018-10-08T13:48:32.420Z,1539006512.420 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T13:48:32.420Z,1539006512.420 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T13:48:37.120Z,1539006517.120 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20181008T052431/Courier0148.lzma
2018-10-08T13:48:37.912Z,1539006517.912 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0148.lzma.bak
2018-10-08T13:48:37.912Z,1539006517.912 [DataOverHttps](INFO): SBD MOMSN=8613917
2018-10-08T13:48:47.708Z,1539006527.708 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0149.lzma
2018-10-08T13:48:48.504Z,1539006528.504 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0149.lzma.bak
2018-10-08T13:48:48.504Z,1539006528.504 [DataOverHttps](INFO): SBD MOMSN=8613919
2018-10-08T13:48:49.502Z,1539006529.502 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T13:48:49.502Z,1539006529.502 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T13:48:49.502Z,1539006529.502 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T13:51:08.595Z,1539006668.595 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:51:08.595Z,1539006668.595 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-08T13:51:08.595Z,1539006668.595 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:51:08.630Z,1539006668.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:51:09.009Z,1539006669.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:51:09.009Z,1539006669.009 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-08T13:51:09.385Z,1539006669.385 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:51:09.386Z,1539006669.386 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:51:09.386Z,1539006669.386 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:52:05.962Z,1539006725.962 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T13:52:05.962Z,1539006725.962 [NAL9602] Data Fault, FailCount= 1
2018-10-08T13:52:05.962Z,1539006725.963 [NAL9602](ERROR): Data Fault
2018-10-08T13:52:06.113Z,1539006726.113 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T13:52:06.364Z,1539006726.364 [NAL9602](INFO): Powering down
2018-10-08T13:52:07.242Z,1539006727.242 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T13:52:07.242Z,1539006727.242 [NAL9602] No Fault, FailCount= 1
2018-10-08T13:52:36.762Z,1539006756.762 [NAL9602](INFO): Powering up NAL9602
2018-10-08T13:52:47.962Z,1539006767.962 [NAL9602](INFO): NAL9602 initialized
2018-10-08T13:53:49.756Z,1539006829.756 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T13:53:49.756Z,1539006829.756 [Default:CheckIn:C.Wait] Stopped
2018-10-08T13:53:49.757Z,1539006829.757 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T13:53:49.757Z,1539006829.757 [Default:CheckIn:D] Running Loop=1
2018-10-08T13:53:50.179Z,1539006830.179 [Default:CheckIn:D] Stopped
2018-10-08T13:53:50.180Z,1539006830.180 [Default:CheckIn:E] Running Loop=1
2018-10-08T13:53:50.558Z,1539006830.558 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 505.771484 min 
2018-10-08T13:53:50.558Z,1539006830.558 [Default:CheckIn:E] Stopped
2018-10-08T13:53:50.559Z,1539006830.559 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T13:53:50.559Z,1539006830.559 [Default:CheckIn] Stopped
2018-10-08T13:53:50.559Z,1539006830.559 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T13:53:50.559Z,1539006830.559 [Default:CheckIn](INFO): Running loop #50
2018-10-08T13:53:50.559Z,1539006830.559 [Default:CheckIn] Running Loop=50
2018-10-08T13:53:50.559Z,1539006830.559 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T13:53:50.559Z,1539006830.559 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T13:54:09.710Z,1539006849.710 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:54:09.710Z,1539006849.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-08T13:54:09.710Z,1539006849.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:54:09.723Z,1539006849.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:54:10.328Z,1539006850.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T13:54:10.333Z,1539006850.333 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-08T13:54:10.508Z,1539006850.508 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T13:54:10.509Z,1539006850.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T13:54:10.509Z,1539006850.509 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T13:55:02.462Z,1539006902.462 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T13:55:02.462Z,1539006902.462 [DropWeight] No Fault, FailCount= 1
2018-10-08T13:57:10.597Z,1539007030.597 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T13:57:10.597Z,1539007030.597 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-08T13:57:10.597Z,1539007030.597 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T13:57:10.625Z,1539007030.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:57:10.626Z,1539007030.626 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T13:58:50.827Z,1539007130.827 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T13:53:50.6Z
2018-10-08T13:58:50.827Z,1539007130.827 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T13:58:50.827Z,1539007130.827 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T13:58:55.463Z,1539007135.463 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0151.lzma
2018-10-08T13:58:56.264Z,1539007136.264 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0151.lzma.bak
2018-10-08T13:58:56.264Z,1539007136.264 [DataOverHttps](INFO): SBD MOMSN=8613925
2018-10-08T13:59:05.999Z,1539007145.999 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20181008T052431/Express0152.lzma
2018-10-08T13:59:06.802Z,1539007146.802 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0152.lzma.bak
2018-10-08T13:59:06.802Z,1539007146.802 [DataOverHttps](INFO): SBD MOMSN=8613927
2018-10-08T13:59:07.799Z,1539007147.799 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T13:59:07.799Z,1539007147.799 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T13:59:07.800Z,1539007147.800 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T14:02:50.334Z,1539007370.334 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T14:02:50.334Z,1539007370.334 [NAL9602] Data Fault, FailCount= 2
2018-10-08T14:02:50.334Z,1539007370.334 [NAL9602](ERROR): Data Fault
2018-10-08T14:02:50.508Z,1539007370.508 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T14:02:50.727Z,1539007370.727 [NAL9602](INFO): Powering down
2018-10-08T14:02:51.619Z,1539007371.619 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T14:02:51.619Z,1539007371.619 [NAL9602] No Fault, FailCount= 2
2018-10-08T14:03:21.011Z,1539007401.011 [NAL9602](INFO): Powering up NAL9602
2018-10-08T14:03:32.211Z,1539007412.211 [NAL9602](INFO): NAL9602 initialized
2018-10-08T14:04:08.287Z,1539007448.287 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T14:04:08.287Z,1539007448.287 [Default:CheckIn:C.Wait] Stopped
2018-10-08T14:04:08.287Z,1539007448.287 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T14:04:08.287Z,1539007448.287 [Default:CheckIn:D] Running Loop=1
2018-10-08T14:04:08.659Z,1539007448.659 [Default:CheckIn:D] Stopped
2018-10-08T14:04:08.659Z,1539007448.659 [Default:CheckIn:E] Running Loop=1
2018-10-08T14:04:09.063Z,1539007449.063 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 516.079492 min 
2018-10-08T14:04:09.063Z,1539007449.063 [Default:CheckIn:E] Stopped
2018-10-08T14:04:09.063Z,1539007449.063 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T14:04:09.063Z,1539007449.063 [Default:CheckIn] Stopped
2018-10-08T14:04:09.063Z,1539007449.063 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T14:04:09.064Z,1539007449.064 [Default:CheckIn](INFO): Running loop #51
2018-10-08T14:04:09.064Z,1539007449.064 [Default:CheckIn] Running Loop=51
2018-10-08T14:04:09.064Z,1539007449.064 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T14:04:09.064Z,1539007449.064 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T14:09:09.408Z,1539007749.408 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:04:09.1Z
2018-10-08T14:09:09.408Z,1539007749.408 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T14:09:09.408Z,1539007749.408 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T14:09:14.202Z,1539007754.202 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0154.lzma
2018-10-08T14:09:14.956Z,1539007754.956 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0154.lzma.bak
2018-10-08T14:09:14.956Z,1539007754.956 [DataOverHttps](INFO): SBD MOMSN=8613933
2018-10-08T14:09:24.405Z,1539007764.405 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0155.lzma
2018-10-08T14:09:25.200Z,1539007765.200 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0155.lzma.bak
2018-10-08T14:09:25.200Z,1539007765.200 [DataOverHttps](INFO): SBD MOMSN=8613935
2018-10-08T14:09:26.202Z,1539007766.202 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T14:09:26.202Z,1539007766.202 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T14:09:26.202Z,1539007766.202 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T14:12:10.904Z,1539007930.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:12:10.904Z,1539007930.904 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-08T14:12:11.295Z,1539007931.295 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:12:11.295Z,1539007931.295 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:12:11.296Z,1539007931.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:12:20.877Z,1539007940.877 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-10-08T14:12:20.877Z,1539007940.877 [Rowe_600LCM] Communications Fault, FailCount= 3
2018-10-08T14:12:20.877Z,1539007940.877 [Rowe_600LCM](ERROR): Communications Fault
2018-10-08T14:12:20.972Z,1539007940.972 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2018-10-08T14:12:21.281Z,1539007941.281 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-10-08T14:12:21.464Z,1539007941.464 [Rowe_600LCM](INFO): Powering down
2018-10-08T14:12:22.908Z,1539007942.908 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2018-10-08T14:12:22.908Z,1539007942.908 [Rowe_600LCM] No Fault, FailCount= 3
2018-10-08T14:12:23.081Z,1539007943.081 [Rowe_600LCM](INFO): Initializing
2018-10-08T14:12:23.081Z,1539007943.081 [Rowe_600LCM](INFO): Checking LCM
2018-10-08T14:12:23.082Z,1539007943.082 [Rowe_600LCM](INFO): LCM OK
2018-10-08T14:12:23.082Z,1539007943.082 [Rowe_600LCM](INFO): Powering up
2018-10-08T14:12:27.205Z,1539007947.205 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-10-08T14:12:27.372Z,1539007947.372 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 9600 >& /dev/null &
2018-10-08T14:12:27.374Z,1539007947.374 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-10-08T14:12:27.374Z,1539007947.374 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-10-08T14:12:27.375Z,1539007947.375 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-10-08T14:13:34.559Z,1539008014.559 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T14:13:34.559Z,1539008014.559 [NAL9602] Data Fault, FailCount= 3
2018-10-08T14:13:34.559Z,1539008014.559 [NAL9602](ERROR): Data Fault
2018-10-08T14:13:34.642Z,1539008014.642 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T14:13:34.959Z,1539008014.959 [NAL9602](INFO): Powering down
2018-10-08T14:13:35.828Z,1539008015.828 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T14:13:35.828Z,1539008015.828 [NAL9602] No Fault, FailCount= 3
2018-10-08T14:14:04.962Z,1539008044.962 [NAL9602](INFO): Powering up NAL9602
2018-10-08T14:14:16.163Z,1539008056.163 [NAL9602](INFO): NAL9602 initialized
2018-10-08T14:14:26.610Z,1539008066.610 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T14:14:26.610Z,1539008066.610 [Default:CheckIn:C.Wait] Stopped
2018-10-08T14:14:26.610Z,1539008066.610 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T14:14:26.610Z,1539008066.610 [Default:CheckIn:D] Running Loop=1
2018-10-08T14:14:27.010Z,1539008067.010 [Default:CheckIn:D] Stopped
2018-10-08T14:14:27.010Z,1539008067.010 [Default:CheckIn:E] Running Loop=1
2018-10-08T14:14:27.399Z,1539008067.399 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 526.385352 min 
2018-10-08T14:14:27.400Z,1539008067.400 [Default:CheckIn:E] Stopped
2018-10-08T14:14:27.400Z,1539008067.400 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T14:14:27.400Z,1539008067.400 [Default:CheckIn] Stopped
2018-10-08T14:14:27.400Z,1539008067.400 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T14:14:27.400Z,1539008067.400 [Default:CheckIn](INFO): Running loop #52
2018-10-08T14:14:27.400Z,1539008067.400 [Default:CheckIn] Running Loop=52
2018-10-08T14:14:27.400Z,1539008067.400 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T14:14:27.421Z,1539008067.421 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T14:14:44.383Z,1539008084.383 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:14:44.383Z,1539008084.383 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.384Z,1539008084.384 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:14:44.402Z,1539008084.402 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:14:44.402Z,1539008084.402 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:14:44.403Z,1539008084.403 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.404Z,1539008084.404 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.405Z,1539008084.405 [BPC1](ERROR): Battery stick #25 (s/n: 00E8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.406Z,1539008084.406 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.407Z,1539008084.407 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.408Z,1539008084.408 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.417Z,1539008084.417 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.418Z,1539008084.418 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.419Z,1539008084.419 [BPC1](ERROR): Battery stick #40 (s/n: 0095) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.419Z,1539008084.419 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:14:44.420Z,1539008084.420 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:14:44.425Z,1539008084.425 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:14:44.426Z,1539008084.426 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.427Z,1539008084.427 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:14:44.428Z,1539008084.428 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:14:44.441Z,1539008084.441 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:14:44.442Z,1539008084.442 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.443Z,1539008084.443 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:14:44.444Z,1539008084.444 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:14:44.444Z,1539008084.444 [BPC1](INFO): Calculating totals. Valid battery stick count: 34. Valid reserve battery stick count: 4.
2018-10-08T14:14:44.452Z,1539008084.452 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 24 sticks.
2018-10-08T14:14:44.452Z,1539008084.452 [BPC1] Data Fault, FailCount= 5
2018-10-08T14:14:44.452Z,1539008084.452 [BPC1](ERROR): Data Fault
2018-10-08T14:14:44.518Z,1539008084.518 [CBIT](ERROR): Data Fault in component: BPC1
2018-10-08T14:15:11.605Z,1539008111.605 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:15:11.605Z,1539008111.605 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T14:15:11.605Z,1539008111.605 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:15:11.619Z,1539008111.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:15:12.091Z,1539008112.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:15:12.091Z,1539008112.091 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T14:15:12.411Z,1539008112.411 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:15:12.412Z,1539008112.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:15:12.412Z,1539008112.412 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:18:12.776Z,1539008292.776 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:18:12.776Z,1539008292.776 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-10-08T14:18:12.777Z,1539008292.777 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:18:12.805Z,1539008292.805 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:18:13.188Z,1539008293.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:18:13.188Z,1539008293.188 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-10-08T14:18:13.568Z,1539008293.568 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:18:13.568Z,1539008293.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:18:13.569Z,1539008293.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:19:27.510Z,1539008367.510 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:14:27.4Z
2018-10-08T14:19:27.510Z,1539008367.510 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T14:19:27.510Z,1539008367.510 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T14:19:32.223Z,1539008372.223 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T052431/Courier0157.lzma
2018-10-08T14:19:33.016Z,1539008373.016 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0157.lzma.bak
2018-10-08T14:19:33.016Z,1539008373.016 [DataOverHttps](INFO): SBD MOMSN=8613941
2018-10-08T14:19:43.425Z,1539008383.425 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20181008T052431/Express0158.lzma
2018-10-08T14:19:44.224Z,1539008384.224 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0158.lzma.bak
2018-10-08T14:19:44.224Z,1539008384.224 [DataOverHttps](INFO): SBD MOMSN=8613943
2018-10-08T14:19:45.316Z,1539008385.316 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T14:19:45.316Z,1539008385.316 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T14:19:45.316Z,1539008385.316 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T14:21:13.624Z,1539008473.624 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:21:13.624Z,1539008473.624 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-10-08T14:21:13.624Z,1539008473.624 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:21:13.637Z,1539008473.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:21:14.123Z,1539008474.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:21:14.123Z,1539008474.123 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-10-08T14:21:14.407Z,1539008474.407 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:21:14.408Z,1539008474.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:21:14.408Z,1539008474.408 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:24:14.723Z,1539008654.723 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:24:14.723Z,1539008654.723 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-10-08T14:24:14.723Z,1539008654.723 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:24:14.744Z,1539008654.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:24:15.144Z,1539008655.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:24:15.144Z,1539008655.144 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-10-08T14:24:15.533Z,1539008655.533 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:24:15.533Z,1539008655.533 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:24:15.534Z,1539008655.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:24:18.275Z,1539008658.275 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T14:24:18.275Z,1539008658.275 [NAL9602] Data Fault, FailCount= 4
2018-10-08T14:24:18.275Z,1539008658.275 [NAL9602](ERROR): Data Fault
2018-10-08T14:24:18.364Z,1539008658.364 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T14:24:18.675Z,1539008658.675 [NAL9602](INFO): Powering down
2018-10-08T14:24:19.533Z,1539008659.533 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T14:24:19.533Z,1539008659.533 [NAL9602] No Fault, FailCount= 4
2018-10-08T14:24:45.521Z,1539008685.521 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T14:24:45.521Z,1539008685.521 [Default:CheckIn:C.Wait] Stopped
2018-10-08T14:24:45.521Z,1539008685.521 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T14:24:45.522Z,1539008685.522 [Default:CheckIn:D] Running Loop=1
2018-10-08T14:24:45.553Z,1539008685.553 [CBIT](INFO): Clearing failed state for component BPC1
2018-10-08T14:24:45.553Z,1539008685.553 [BPC1] No Fault, FailCount= 5
2018-10-08T14:24:45.959Z,1539008685.959 [Default:CheckIn:D] Stopped
2018-10-08T14:24:45.959Z,1539008685.959 [Default:CheckIn:E] Running Loop=1
2018-10-08T14:24:46.317Z,1539008686.317 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 536.701139 min 
2018-10-08T14:24:46.317Z,1539008686.317 [Default:CheckIn:E] Stopped
2018-10-08T14:24:46.318Z,1539008686.318 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T14:24:46.318Z,1539008686.318 [Default:CheckIn] Stopped
2018-10-08T14:24:46.318Z,1539008686.318 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T14:24:46.318Z,1539008686.318 [Default:CheckIn](INFO): Running loop #53
2018-10-08T14:24:46.318Z,1539008686.318 [Default:CheckIn] Running Loop=53
2018-10-08T14:24:46.318Z,1539008686.318 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T14:24:46.318Z,1539008686.318 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T14:24:49.950Z,1539008689.950 [NAL9602](INFO): Powering up NAL9602
2018-10-08T14:25:00.843Z,1539008700.843 [NAL9602](INFO): NAL9602 initialized
2018-10-08T14:25:03.642Z,1539008703.642 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T14:25:03.642Z,1539008703.642 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T14:25:03.642Z,1539008703.642 [DropWeight](ERROR): Hardware Fault
2018-10-08T14:25:03.733Z,1539008703.733 [CBIT](INFO): Critical error at 20181008T142503
2018-10-08T14:25:03.736Z,1539008703.736 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T14:25:03.736Z,1539008703.736 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T14:25:04.123Z,1539008704.123 [CBIT](INFO): Critical error at 20181008T142503
2018-10-08T14:27:15.873Z,1539008835.873 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:27:15.873Z,1539008835.873 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-10-08T14:27:15.873Z,1539008835.873 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:27:15.903Z,1539008835.903 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:27:16.291Z,1539008836.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:27:16.291Z,1539008836.291 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-10-08T14:27:16.678Z,1539008836.678 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:27:16.678Z,1539008836.678 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:27:16.679Z,1539008836.679 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:29:46.603Z,1539008986.603 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:24:46.3Z
2018-10-08T14:29:46.603Z,1539008986.603 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T14:29:46.603Z,1539008986.603 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T14:29:51.269Z,1539008991.269 [DataOverHttps](INFO): Sending 104 bytes from file Logs/20181008T052431/Courier0160.lzma
2018-10-08T14:29:52.052Z,1539008992.052 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0160.lzma.bak
2018-10-08T14:29:52.052Z,1539008992.052 [DataOverHttps](INFO): SBD MOMSN=8613949
2018-10-08T14:30:01.688Z,1539009001.688 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0161.lzma
2018-10-08T14:30:02.482Z,1539009002.482 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0161.lzma.bak
2018-10-08T14:30:02.482Z,1539009002.482 [DataOverHttps](INFO): SBD MOMSN=8613951
2018-10-08T14:30:03.484Z,1539009003.484 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T14:30:03.484Z,1539009003.484 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T14:30:03.484Z,1539009003.484 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T14:30:16.772Z,1539009016.772 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:30:16.777Z,1539009016.777 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-10-08T14:30:16.777Z,1539009016.777 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:30:16.799Z,1539009016.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:30:17.130Z,1539009017.130 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:30:17.131Z,1539009017.131 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-10-08T14:30:17.507Z,1539009017.507 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:30:17.507Z,1539009017.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:30:17.508Z,1539009017.508 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:33:17.821Z,1539009197.821 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:33:17.821Z,1539009197.821 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-10-08T14:33:17.821Z,1539009197.821 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:33:17.856Z,1539009197.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:33:18.250Z,1539009198.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:33:18.251Z,1539009198.251 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-10-08T14:33:18.676Z,1539009198.676 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:33:18.677Z,1539009198.677 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:33:18.678Z,1539009198.678 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:35:02.334Z,1539009302.334 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T14:35:02.334Z,1539009302.334 [NAL9602] Data Fault, FailCount= 5
2018-10-08T14:35:02.334Z,1539009302.334 [NAL9602](ERROR): Data Fault
2018-10-08T14:35:02.421Z,1539009302.421 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T14:35:02.422Z,1539009302.422 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T14:35:02.734Z,1539009302.734 [NAL9602](INFO): Powering down
2018-10-08T14:35:02.826Z,1539009302.826 [CBIT](INFO): Critical error at 20181008T143502
2018-10-08T14:35:03.992Z,1539009303.992 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T14:35:03.992Z,1539009303.992 [Default:CheckIn:C.Wait] Stopped
2018-10-08T14:35:03.992Z,1539009303.992 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T14:35:03.992Z,1539009303.992 [Default:CheckIn:D] Running Loop=1
2018-10-08T14:35:04.391Z,1539009304.391 [Default:CheckIn:D] Stopped
2018-10-08T14:35:04.391Z,1539009304.391 [Default:CheckIn:E] Running Loop=1
2018-10-08T14:35:04.776Z,1539009304.776 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 547.008333 min 
2018-10-08T14:35:04.776Z,1539009304.776 [Default:CheckIn:E] Stopped
2018-10-08T14:35:04.776Z,1539009304.776 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T14:35:04.801Z,1539009304.801 [Default:CheckIn] Stopped
2018-10-08T14:35:04.801Z,1539009304.801 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T14:35:04.801Z,1539009304.801 [Default:CheckIn](INFO): Running loop #54
2018-10-08T14:35:04.801Z,1539009304.801 [Default:CheckIn] Running Loop=54
2018-10-08T14:35:04.801Z,1539009304.801 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T14:35:04.801Z,1539009304.801 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T14:36:18.952Z,1539009378.952 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:36:18.952Z,1539009378.952 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-10-08T14:36:18.952Z,1539009378.952 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:36:18.990Z,1539009378.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:36:19.381Z,1539009379.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:36:19.382Z,1539009379.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-10-08T14:36:19.749Z,1539009379.749 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:36:19.749Z,1539009379.749 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:36:19.750Z,1539009379.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:37:02.653Z,1539009422.653 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T14:37:02.653Z,1539009422.653 [NAL9602] No Fault, FailCount= 5
2018-10-08T14:37:02.910Z,1539009422.910 [NAL9602](INFO): Powering up NAL9602
2018-10-08T14:37:13.758Z,1539009433.758 [NAL9602](INFO): NAL9602 initialized
2018-10-08T14:39:20.153Z,1539009560.153 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:39:20.153Z,1539009560.153 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-10-08T14:39:20.153Z,1539009560.153 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:39:20.179Z,1539009560.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:39:20.624Z,1539009560.624 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:39:20.624Z,1539009560.624 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-10-08T14:39:20.956Z,1539009560.956 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:39:20.957Z,1539009560.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:39:20.957Z,1539009560.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:40:03.754Z,1539009603.754 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T14:40:03.754Z,1539009603.754 [DropWeight] No Fault, FailCount= 1
2018-10-08T14:40:04.942Z,1539009604.942 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:35:04.8Z
2018-10-08T14:40:04.942Z,1539009604.942 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T14:40:04.942Z,1539009604.942 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T14:40:09.543Z,1539009609.543 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20181008T052431/Courier0163.lzma
2018-10-08T14:40:10.324Z,1539009610.324 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0163.lzma.bak
2018-10-08T14:40:10.324Z,1539009610.324 [DataOverHttps](INFO): SBD MOMSN=8613957
2018-10-08T14:40:20.074Z,1539009620.074 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20181008T052431/Express0164.lzma
2018-10-08T14:40:20.868Z,1539009620.868 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0164.lzma.bak
2018-10-08T14:40:20.868Z,1539009620.868 [DataOverHttps](INFO): SBD MOMSN=8613959
2018-10-08T14:40:21.879Z,1539009621.879 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T14:40:21.879Z,1539009621.879 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T14:40:21.879Z,1539009621.879 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T14:42:21.230Z,1539009741.230 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:42:21.230Z,1539009741.230 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-10-08T14:42:21.230Z,1539009741.230 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:42:21.243Z,1539009741.243 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:42:21.644Z,1539009741.644 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:42:21.644Z,1539009741.644 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-10-08T14:42:22.031Z,1539009742.031 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:42:22.032Z,1539009742.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:42:22.032Z,1539009742.032 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:45:22.341Z,1539009922.341 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:45:22.341Z,1539009922.341 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-10-08T14:45:22.341Z,1539009922.341 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:45:22.352Z,1539009922.352 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T14:45:22.353Z,1539009922.353 [Default:CheckIn:C.Wait] Stopped
2018-10-08T14:45:22.353Z,1539009922.353 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T14:45:22.353Z,1539009922.353 [Default:CheckIn:D] Running Loop=1
2018-10-08T14:45:22.390Z,1539009922.390 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:45:22.707Z,1539009922.707 [Default:CheckIn:D] Stopped
2018-10-08T14:45:22.707Z,1539009922.707 [Default:CheckIn:E] Running Loop=1
2018-10-08T14:45:22.720Z,1539009922.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:45:22.720Z,1539009922.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-10-08T14:45:23.103Z,1539009923.103 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:45:23.103Z,1539009923.103 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:45:23.104Z,1539009923.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:45:23.105Z,1539009923.105 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 557.313607 min 
2018-10-08T14:45:23.106Z,1539009923.106 [Default:CheckIn:E] Stopped
2018-10-08T14:45:23.106Z,1539009923.106 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T14:45:23.106Z,1539009923.106 [Default:CheckIn] Stopped
2018-10-08T14:45:23.106Z,1539009923.106 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T14:45:23.106Z,1539009923.106 [Default:CheckIn](INFO): Running loop #55
2018-10-08T14:45:23.106Z,1539009923.106 [Default:CheckIn] Running Loop=55
2018-10-08T14:45:23.107Z,1539009923.107 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T14:45:23.107Z,1539009923.107 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T14:47:15.178Z,1539010035.178 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T14:47:15.179Z,1539010035.179 [NAL9602] Data Fault, FailCount= 1
2018-10-08T14:47:15.179Z,1539010035.179 [NAL9602](ERROR): Data Fault
2018-10-08T14:47:15.267Z,1539010035.267 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T14:47:15.579Z,1539010035.579 [NAL9602](INFO): Powering down
2018-10-08T14:47:16.494Z,1539010036.494 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T14:47:16.495Z,1539010036.495 [NAL9602] No Fault, FailCount= 1
2018-10-08T14:47:45.867Z,1539010065.867 [NAL9602](INFO): Powering up NAL9602
2018-10-08T14:47:57.063Z,1539010077.063 [NAL9602](INFO): NAL9602 initialized
2018-10-08T14:48:23.131Z,1539010103.131 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:48:23.131Z,1539010103.131 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-10-08T14:48:23.132Z,1539010103.132 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:48:23.163Z,1539010103.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:48:23.543Z,1539010103.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:48:23.543Z,1539010103.543 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-10-08T14:48:23.909Z,1539010103.909 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:48:23.909Z,1539010103.909 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:48:23.910Z,1539010103.910 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:50:23.278Z,1539010223.278 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:45:23.1Z
2018-10-08T14:50:23.278Z,1539010223.278 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T14:50:23.278Z,1539010223.278 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T14:50:27.869Z,1539010227.869 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0166.lzma
2018-10-08T14:50:28.660Z,1539010228.660 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0166.lzma.bak
2018-10-08T14:50:28.660Z,1539010228.660 [DataOverHttps](INFO): SBD MOMSN=8613965
2018-10-08T14:50:38.565Z,1539010238.565 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0167.lzma
2018-10-08T14:50:39.340Z,1539010239.340 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0167.lzma.bak
2018-10-08T14:50:39.340Z,1539010239.340 [DataOverHttps](INFO): SBD MOMSN=8613967
2018-10-08T14:50:40.494Z,1539010240.494 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T14:50:40.495Z,1539010240.495 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T14:50:40.495Z,1539010240.495 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T14:51:23.976Z,1539010283.976 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:51:23.976Z,1539010283.976 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-10-08T14:51:23.976Z,1539010283.976 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:51:24.028Z,1539010284.028 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:51:24.379Z,1539010284.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:51:24.379Z,1539010284.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-10-08T14:51:24.775Z,1539010284.775 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:51:24.775Z,1539010284.775 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:51:24.776Z,1539010284.776 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:54:24.877Z,1539010464.877 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:54:24.877Z,1539010464.877 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-10-08T14:54:24.877Z,1539010464.877 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:54:24.891Z,1539010464.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:54:25.290Z,1539010465.290 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:54:25.290Z,1539010465.290 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-10-08T14:54:25.664Z,1539010465.664 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:54:25.664Z,1539010465.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:54:25.664Z,1539010465.664 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:55:40.762Z,1539010540.762 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T14:55:40.762Z,1539010540.762 [Default:CheckIn:C.Wait] Stopped
2018-10-08T14:55:40.762Z,1539010540.762 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T14:55:40.762Z,1539010540.762 [Default:CheckIn:D] Running Loop=1
2018-10-08T14:55:41.173Z,1539010541.173 [Default:CheckIn:D] Stopped
2018-10-08T14:55:41.173Z,1539010541.173 [Default:CheckIn:E] Running Loop=1
2018-10-08T14:55:41.583Z,1539010541.583 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 567.621419 min 
2018-10-08T14:55:41.583Z,1539010541.583 [Default:CheckIn:E] Stopped
2018-10-08T14:55:41.583Z,1539010541.583 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T14:55:41.583Z,1539010541.583 [Default:CheckIn] Stopped
2018-10-08T14:55:41.584Z,1539010541.584 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T14:55:41.584Z,1539010541.584 [Default:CheckIn](INFO): Running loop #56
2018-10-08T14:55:41.584Z,1539010541.584 [Default:CheckIn] Running Loop=56
2018-10-08T14:55:41.584Z,1539010541.584 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T14:55:41.584Z,1539010541.584 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T14:55:46.166Z,1539010546.166 [BPC1](ERROR): Battery stick #1 (s/n: 0138) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:55:46.168Z,1539010546.168 [BPC1](ERROR): Battery stick #8 (s/n: 00E7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.170Z,1539010546.170 [BPC1](ERROR): Battery stick #14 (s/n: 011D) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:55:46.172Z,1539010546.172 [BPC1](ERROR): Battery stick #15 (s/n: 014E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:55:46.174Z,1539010546.174 [BPC1](ERROR): Battery stick #18 (s/n: 0140) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:55:46.176Z,1539010546.176 [BPC1](ERROR): Battery stick #21 (s/n: 00CD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.179Z,1539010546.179 [BPC1](ERROR): Battery stick #22 (s/n: 009F) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.180Z,1539010546.180 [BPC1](ERROR): Battery stick #25 (s/n: 00E8) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.181Z,1539010546.181 [BPC1](ERROR): Battery stick #26 (s/n: 00D1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.182Z,1539010546.182 [BPC1](ERROR): Battery stick #28 (s/n: 0092) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.183Z,1539010546.183 [BPC1](ERROR): Battery stick #30 (s/n: 00E9) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.184Z,1539010546.184 [BPC1](ERROR): Battery stick #32 (s/n: 0157) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.185Z,1539010546.185 [BPC1](ERROR): Battery stick #39 (s/n: 00FD) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.186Z,1539010546.186 [BPC1](ERROR): Battery stick #40 (s/n: 0095) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.186Z,1539010546.186 [BPC1](ERROR): Battery stick #43 (s/n: 00AE) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:55:46.187Z,1539010546.187 [BPC1](ERROR): Battery stick #44 (s/n: 00CB) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:55:46.188Z,1539010546.188 [BPC1](ERROR): Battery stick #45 (s/n: 00F7) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:55:46.189Z,1539010546.189 [BPC1](ERROR): Battery stick #46 (s/n: 00A1) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.190Z,1539010546.190 [BPC1](ERROR): Battery stick #50 (s/n: 0152) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:55:46.191Z,1539010546.191 [BPC1](ERROR): Battery stick #51 (s/n: 014A) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AC0.
2018-10-08T14:55:46.192Z,1539010546.192 [BPC1](ERROR): Battery stick #53 (s/n: 015E) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:55:46.192Z,1539010546.192 [BPC1](ERROR): Battery stick #56 (s/n: 0091) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.193Z,1539010546.193 [BPC1](ERROR): Battery stick #57 (s/n: 0153) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x48C0.
2018-10-08T14:55:46.194Z,1539010546.194 [BPC1](ERROR): Battery stick #62 (s/n: 00DA) reported TERMINATE_DISCHARGE_ALARM. Status code: 0x4AD0.
2018-10-08T14:55:46.195Z,1539010546.195 [BPC1](INFO): Calculating totals. Valid battery stick count: 34. Valid reserve battery stick count: 4.
2018-10-08T14:55:46.231Z,1539010546.231 [BPC1](FAULT): Failed to receive data from all sticks prior to timeout. Missing data from 24 sticks.
2018-10-08T14:55:46.231Z,1539010546.231 [BPC1] Data Fault, FailCount= 6
2018-10-08T14:55:46.231Z,1539010546.231 [BPC1](ERROR): Data Fault
2018-10-08T14:55:46.291Z,1539010546.291 [CBIT](ERROR): Data Fault in component: BPC1
2018-10-08T14:57:25.899Z,1539010645.899 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T14:57:25.899Z,1539010645.899 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-10-08T14:57:25.899Z,1539010645.899 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T14:57:25.913Z,1539010645.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T14:57:26.328Z,1539010646.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T14:57:26.328Z,1539010646.328 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-10-08T14:57:26.725Z,1539010646.725 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T14:57:26.725Z,1539010646.725 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T14:57:26.726Z,1539010646.726 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T14:57:58.455Z,1539010678.455 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T14:57:58.455Z,1539010678.455 [NAL9602] Data Fault, FailCount= 2
2018-10-08T14:57:58.455Z,1539010678.455 [NAL9602](ERROR): Data Fault
2018-10-08T14:57:58.566Z,1539010678.566 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T14:57:58.854Z,1539010678.854 [NAL9602](INFO): Powering down
2018-10-08T14:57:59.752Z,1539010679.752 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T14:57:59.752Z,1539010679.752 [NAL9602] No Fault, FailCount= 2
2018-10-08T14:58:28.886Z,1539010708.886 [NAL9602](INFO): Powering up NAL9602
2018-10-08T14:58:39.687Z,1539010719.687 [NAL9602](INFO): NAL9602 initialized
2018-10-08T15:00:26.800Z,1539010826.800 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T15:00:26.800Z,1539010826.800 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-10-08T15:00:26.800Z,1539010826.800 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T15:00:26.814Z,1539010826.814 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T15:00:27.220Z,1539010827.220 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T15:00:27.220Z,1539010827.220 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-10-08T15:00:27.610Z,1539010827.610 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T15:00:27.610Z,1539010827.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T15:00:27.610Z,1539010827.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T15:00:41.600Z,1539010841.600 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T14:55:41.6Z
2018-10-08T15:00:41.600Z,1539010841.600 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T15:00:41.600Z,1539010841.600 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T15:00:46.244Z,1539010846.244 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20181008T052431/Courier0169.lzma
2018-10-08T15:00:47.012Z,1539010847.012 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0169.lzma.bak
2018-10-08T15:00:47.012Z,1539010847.012 [DataOverHttps](INFO): SBD MOMSN=8613973
2018-10-08T15:00:56.710Z,1539010856.710 [DataOverHttps](INFO): Sending 197 bytes from file Logs/20181008T052431/Express0170.lzma
2018-10-08T15:00:57.486Z,1539010857.486 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0170.lzma.bak
2018-10-08T15:00:57.486Z,1539010857.486 [DataOverHttps](INFO): SBD MOMSN=8613975
2018-10-08T15:00:58.661Z,1539010858.661 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T15:00:58.661Z,1539010858.661 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T15:00:58.661Z,1539010858.661 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T15:03:27.828Z,1539011007.828 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T15:03:27.828Z,1539011007.828 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-10-08T15:03:27.829Z,1539011007.829 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T15:03:27.862Z,1539011007.862 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T15:03:28.272Z,1539011008.272 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T15:03:28.272Z,1539011008.272 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-10-08T15:03:28.661Z,1539011008.661 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T15:03:28.662Z,1539011008.662 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T15:03:28.662Z,1539011008.662 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T15:05:47.197Z,1539011147.197 [CBIT](INFO): Clearing failed state for component BPC1
2018-10-08T15:05:47.197Z,1539011147.197 [BPC1] No Fault, FailCount= 6
2018-10-08T15:05:59.154Z,1539011159.154 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T15:05:59.154Z,1539011159.154 [Default:CheckIn:C.Wait] Stopped
2018-10-08T15:05:59.154Z,1539011159.154 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T15:05:59.154Z,1539011159.154 [Default:CheckIn:D] Running Loop=1
2018-10-08T15:05:59.580Z,1539011159.580 [Default:CheckIn:D] Stopped
2018-10-08T15:05:59.580Z,1539011159.580 [Default:CheckIn:E] Running Loop=1
2018-10-08T15:06:00.020Z,1539011160.020 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 577.928190 min 
2018-10-08T15:06:00.020Z,1539011160.020 [Default:CheckIn:E] Stopped
2018-10-08T15:06:00.020Z,1539011160.020 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T15:06:00.025Z,1539011160.025 [Default:CheckIn] Stopped
2018-10-08T15:06:00.025Z,1539011160.025 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T15:06:00.026Z,1539011160.026 [Default:CheckIn](INFO): Running loop #57
2018-10-08T15:06:00.026Z,1539011160.026 [Default:CheckIn] Running Loop=57
2018-10-08T15:06:00.026Z,1539011160.026 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T15:06:00.026Z,1539011160.026 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T15:06:28.913Z,1539011188.913 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T15:06:28.913Z,1539011188.913 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-10-08T15:06:28.913Z,1539011188.913 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T15:06:28.950Z,1539011188.950 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T15:06:29.360Z,1539011189.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T15:06:29.360Z,1539011189.360 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-10-08T15:06:29.734Z,1539011189.734 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T15:06:29.735Z,1539011189.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T15:06:29.735Z,1539011189.735 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T15:08:40.583Z,1539011320.583 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T15:08:40.583Z,1539011320.583 [NAL9602] Data Fault, FailCount= 3
2018-10-08T15:08:40.583Z,1539011320.583 [NAL9602](ERROR): Data Fault
2018-10-08T15:08:40.664Z,1539011320.664 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T15:08:40.983Z,1539011320.983 [NAL9602](INFO): Powering down
2018-10-08T15:08:41.854Z,1539011321.854 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T15:08:41.854Z,1539011321.854 [NAL9602] No Fault, FailCount= 3
2018-10-08T15:09:11.287Z,1539011351.287 [NAL9602](INFO): Powering up NAL9602
2018-10-08T15:09:22.491Z,1539011362.491 [NAL9602](INFO): NAL9602 initialized
2018-10-08T15:09:29.751Z,1539011369.751 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T15:09:29.752Z,1539011369.752 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-10-08T15:09:29.752Z,1539011369.752 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T15:09:29.773Z,1539011369.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T15:09:30.196Z,1539011370.196 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T15:09:30.196Z,1539011370.196 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-10-08T15:09:30.535Z,1539011370.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T15:09:30.535Z,1539011370.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T15:09:30.536Z,1539011370.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T15:10:05.286Z,1539011405.286 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2018-10-08T15:10:05.286Z,1539011405.286 [DropWeight] Hardware Fault, FailCount= 1
2018-10-08T15:10:05.286Z,1539011405.286 [DropWeight](ERROR): Hardware Fault
2018-10-08T15:10:05.379Z,1539011405.379 [CBIT](INFO): Critical error at 20181008T151005
2018-10-08T15:10:05.381Z,1539011405.381 [CBIT](ERROR): Hardware Fault in component: DropWeight
2018-10-08T15:10:05.382Z,1539011405.382 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2018-10-08T15:10:05.748Z,1539011405.748 [CBIT](INFO): Critical error at 20181008T151005
2018-10-08T15:11:00.173Z,1539011460.173 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:06:00.0Z
2018-10-08T15:11:00.173Z,1539011460.173 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T15:11:00.174Z,1539011460.174 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T15:11:04.869Z,1539011464.869 [DataOverHttps](INFO): Sending 103 bytes from file Logs/20181008T052431/Courier0172.lzma
2018-10-08T15:11:05.656Z,1539011465.656 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0172.lzma.bak
2018-10-08T15:11:05.656Z,1539011465.656 [DataOverHttps](INFO): SBD MOMSN=8613981
2018-10-08T15:11:15.457Z,1539011475.457 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20181008T052431/Express0173.lzma
2018-10-08T15:11:16.243Z,1539011476.243 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0173.lzma.bak
2018-10-08T15:11:16.243Z,1539011476.243 [DataOverHttps](INFO): SBD MOMSN=8613983
2018-10-08T15:11:17.257Z,1539011477.257 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T15:11:17.257Z,1539011477.257 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T15:11:17.257Z,1539011477.257 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T15:12:30.759Z,1539011550.759 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T15:12:30.759Z,1539011550.759 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-10-08T15:12:30.759Z,1539011550.759 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T15:12:30.806Z,1539011550.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T15:12:30.806Z,1539011550.806 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T15:16:17.416Z,1539011777.416 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T15:16:17.416Z,1539011777.416 [Default:CheckIn:C.Wait] Stopped
2018-10-08T15:16:17.416Z,1539011777.416 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T15:16:17.416Z,1539011777.416 [Default:CheckIn:D] Running Loop=1
2018-10-08T15:16:17.815Z,1539011777.815 [Default:CheckIn:D] Stopped
2018-10-08T15:16:17.815Z,1539011777.815 [Default:CheckIn:E] Running Loop=1
2018-10-08T15:16:18.216Z,1539011778.216 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 588.232096 min 
2018-10-08T15:16:18.217Z,1539011778.217 [Default:CheckIn:E] Stopped
2018-10-08T15:16:18.217Z,1539011778.217 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T15:16:18.217Z,1539011778.217 [Default:CheckIn] Stopped
2018-10-08T15:16:18.217Z,1539011778.217 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T15:16:18.217Z,1539011778.217 [Default:CheckIn](INFO): Running loop #58
2018-10-08T15:16:18.217Z,1539011778.217 [Default:CheckIn] Running Loop=58
2018-10-08T15:16:18.218Z,1539011778.218 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T15:16:18.218Z,1539011778.218 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T15:19:25.826Z,1539011965.826 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T15:19:25.827Z,1539011965.827 [NAL9602] Data Fault, FailCount= 4
2018-10-08T15:19:25.827Z,1539011965.827 [NAL9602](ERROR): Data Fault
2018-10-08T15:19:25.907Z,1539011965.907 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T15:19:26.228Z,1539011966.228 [NAL9602](INFO): Powering down
2018-10-08T15:19:27.113Z,1539011967.113 [CBIT](INFO): Clearing failed state for component NAL9602
2018-10-08T15:19:27.113Z,1539011967.113 [NAL9602] No Fault, FailCount= 4
2018-10-08T15:19:56.626Z,1539011996.626 [NAL9602](INFO): Powering up NAL9602
2018-10-08T15:20:07.826Z,1539012007.826 [NAL9602](INFO): NAL9602 initialized
2018-10-08T15:21:18.270Z,1539012078.270 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:16:18.2Z
2018-10-08T15:21:18.270Z,1539012078.270 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T15:21:18.271Z,1539012078.271 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T15:21:22.944Z,1539012082.944 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20181008T052431/Courier0175.lzma
2018-10-08T15:21:23.740Z,1539012083.740 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0175.lzma.bak
2018-10-08T15:21:23.740Z,1539012083.740 [DataOverHttps](INFO): SBD MOMSN=8613989
2018-10-08T15:21:33.493Z,1539012093.493 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20181008T052431/Express0176.lzma
2018-10-08T15:21:34.248Z,1539012094.248 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0176.lzma.bak
2018-10-08T15:21:34.248Z,1539012094.248 [DataOverHttps](INFO): SBD MOMSN=8613991
2018-10-08T15:21:35.289Z,1539012095.289 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T15:21:35.289Z,1539012095.289 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T15:21:35.289Z,1539012095.289 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-10-08T15:25:05.339Z,1539012305.339 [CBIT](INFO): Clearing failed state for component DropWeight
2018-10-08T15:25:05.339Z,1539012305.339 [DropWeight] No Fault, FailCount= 1
2018-10-08T15:26:35.491Z,1539012395.491 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-10-08T15:26:35.492Z,1539012395.492 [Default:CheckIn:C.Wait] Stopped
2018-10-08T15:26:35.492Z,1539012395.492 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-10-08T15:26:35.492Z,1539012395.492 [Default:CheckIn:D] Running Loop=1
2018-10-08T15:26:35.892Z,1539012395.892 [Default:CheckIn:D] Stopped
2018-10-08T15:26:35.892Z,1539012395.892 [Default:CheckIn:E] Running Loop=1
2018-10-08T15:26:36.296Z,1539012396.296 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 598.533398 min 
2018-10-08T15:26:36.296Z,1539012396.296 [Default:CheckIn:E] Stopped
2018-10-08T15:26:36.296Z,1539012396.296 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-10-08T15:26:36.296Z,1539012396.296 [Default:CheckIn] Stopped
2018-10-08T15:26:36.296Z,1539012396.296 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-10-08T15:26:36.297Z,1539012396.297 [Default:CheckIn](INFO): Running loop #59
2018-10-08T15:26:36.297Z,1539012396.297 [Default:CheckIn] Running Loop=59
2018-10-08T15:26:36.297Z,1539012396.297 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-10-08T15:26:36.297Z,1539012396.297 [Default:CheckIn:Read_GPS] Running Loop=1
2018-10-08T15:27:30.909Z,1539012450.909 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T15:27:30.909Z,1539012450.909 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-10-08T15:27:31.334Z,1539012451.334 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T15:27:31.334Z,1539012451.334 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T15:27:31.335Z,1539012451.335 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T15:30:08.907Z,1539012608.907 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-10-08T15:30:08.907Z,1539012608.907 [NAL9602] Data Fault, FailCount= 5
2018-10-08T15:30:08.907Z,1539012608.907 [NAL9602](ERROR): Data Fault
2018-10-08T15:30:08.984Z,1539012608.984 [CBIT](ERROR): Data Fault in component: NAL9602
2018-10-08T15:30:08.997Z,1539012608.997 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-10-08T15:30:09.302Z,1539012609.302 [NAL9602](INFO): Powering down
2018-10-08T15:30:09.374Z,1539012609.374 [CBIT](INFO): Critical error at 20181008T153008
2018-10-08T15:30:31.353Z,1539012631.353 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-10-08T15:30:31.353Z,1539012631.353 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-10-08T15:30:31.353Z,1539012631.353 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-10-08T15:30:31.372Z,1539012631.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-10-08T15:30:31.783Z,1539012631.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-10-08T15:30:31.783Z,1539012631.783 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-10-08T15:30:32.173Z,1539012632.173 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-10-08T15:30:32.173Z,1539012632.173 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-10-08T15:30:32.174Z,1539012632.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-10-08T15:31:36.566Z,1539012696.566 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-10-08T15:26:36.3Z
2018-10-08T15:31:36.566Z,1539012696.566 [Default:CheckIn:Read_GPS] Stopped
2018-10-08T15:31:36.566Z,1539012696.566 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-10-08T15:31:41.221Z,1539012701.221 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20181008T052431/Courier0178.lzma
2018-10-08T15:31:42.030Z,1539012702.030 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Courier0178.lzma.bak
2018-10-08T15:31:42.030Z,1539012702.030 [DataOverHttps](INFO): SBD MOMSN=8613997
2018-10-08T15:31:50.328Z,1539012710.328 [CommandLine](IMPORTANT): got command failComponent
2018-10-08T15:31:50.331Z,1539012710.331 [CommandLine](IMPORTANT): Failed components:
2018-10-08T15:31:50.332Z,1539012710.332 [CommandLine](IMPORTANT): NAL9602: Data Fault
2018-10-08T15:31:51.893Z,1539012711.893 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20181008T052431/Express0179.lzma
2018-10-08T15:31:52.662Z,1539012712.662 [DataOverHttps](INFO): Moved sent file to Logs/20181008T052431/Express0179.lzma.bak
2018-10-08T15:31:52.662Z,1539012712.662 [DataOverHttps](INFO): SBD MOMSN=8613999
2018-10-08T15:31:53.671Z,1539012713.671 [Default:CheckIn:Read_Iridium] Stopped
2018-10-08T15:31:53.671Z,1539012713.671 [Default:CheckIn:C.Wait] Running Loop=1
2018-10-08T15:31:53.671Z,1539012713.671 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.