daphne Path

trajectory

20180710T195420 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20180710T195420 [Rowe_600LCM]:Communications Fault

20180710T195420 [CBIT]:Communications Fault in component: Rowe_600LCM

20180710T195538 [BPC1]:Failed to receive data from both battery packs

20180710T195538 [BPC1]:Communications Fault

20180710T195538 [CBIT]:Communications Fault in component: BPC1

20180710T195648 [Default:CheckIn:E]:Default mission has been running for 309.529622 min

20180710T195912 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180710T200016 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180710T200104 [NAL9602]:Failed to initiate SBD session. Error code: 2

20180710T200214 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180710T200307 [BPC1]:Failed to receive data from both battery packs

20180710T200307 [BPC1]:Communications Fault

20180710T200307 [CBIT]:Communications Fault in component: BPC1

20180710T200621 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20180710T200621 [Rowe_600LCM]:Communications Fault

20180710T200621 [CBIT]:Communications Fault in component: Rowe_600LCM

20180710T200705 [Default:CheckIn:E]:Default mission has been running for 319.802279 min

20180710T200720 [NAL9602]:GPS failed to acquire within timeout.

20180710T200720 [CBIT]:Data Fault in component: NAL9602

20180710T200823 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20180710T200823 [Rowe_600LCM]:Communications Fault

20180710T200823 [CBIT]:Communications Fault in component: Rowe_600LCM

20180710T201422 [BPC1]:Failed to receive data from both battery packs

20180710T201422 [BPC1]:Communications Fault

20180710T201422 [CBIT]:Communications Fault in component: BPC1

20180710T201725 [Default:CheckIn:E]:Default mission has been running for 330.101562 min

20180710T202240 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180710T202501 [BPC1]:Failed to parse Bank A battery data

20180710T202758 [NAL9602]:GPS failed to acquire within timeout.

20180710T202759 [CBIT]:Data Fault in component: NAL9602

20180710T203344 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20180710T203525 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20180710T203525 [Rowe_600LCM]:Hardware Fault

20180710T203847 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20180710T203848 [CBIT]:Data Fault in component: NAL9602

20180710T203930 [NAL9602]:GPS failed to acquire within timeout.

20180710T210942 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20180710T211855 [CBIT]:Beginning ground fault scan

20180710T211959 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20180710T212750 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20180710T212750 [Rowe_600LCM]:Hardware Fault

20180710T215534 [BPC1]:Failed to parse message.

20180710T215534 [BPC1]:Failed to parse Bank B battery data

20180710T221321 [CommandLine]:got command burn 5.000000

20180710T221326 [CommandLine]:Deactivating dropweight wire

20180710T221440 [CommandLine]:got command ibit

20180710T221440 [IBIT]:Beginning Initiated BIT

20180710T221440 [IBIT]:Beginning control surface checks.

20180710T221440 [CBIT]:Beginning ground fault scan

20180710T221630 [IBIT]:Error acquiring IBIT communications status. Timeout expired.

20180710T221631 [IBIT]:Warning: Battery Data not active. Expected only when running primaries. Threshold checking not active.

20180710T221631 [IBIT]:bitPressureThreshold: 0.750000 psi

20180710T221656 [CommandLine]:got command failComponent

20180710T221656 [CommandLine]:Failed components:

20180710T221657 [CommandLine]:Rowe_600LCM: Communications Fault

20180710T221823 [CommandLine]:got command get BPC1.loadAtStartup

20180710T221823 [CommandLine]:BPC1.loadAtStartup 1 bool

20180710T221904 [CommandLine]:got command get

20180710T221904 [CommandLine]:Incomplete syntax. Try: help get

20180710T221914 [CommandLine]:got command get IBIT.batteryCapacityThreshold

20180710T221914 [CommandLine]:IBIT.batteryCapacityThreshold 5.000000 Ah

20180710T221942 [CommandLine]:got command get IBIT.batteryVoltageThreshold

20180710T221942 [CommandLine]:IBIT.batteryVoltageThreshold 13.500000 V

20180710T222004 [CommandLine]:got command failComponent hardware BPC1

20180710T222004 [CommandLine]:BPC1 failureMode is Hardware Fault

20180710T222004 [CBIT]:Hardware Fault in component: BPC1

20180710T222031 [CommandLine]:got command show variable BPC1

20180710T222031 [CommandLine]:BPC1.loadAtStartup (bool)

20180710T222031 [CommandLine]:BPC1.simulateHardware (bool)

20180710T222031 [CommandLine]:BPC1A.uart (none)

20180710T222031 [CommandLine]:BPC1A.baud (bit_per_second)

20180710T222031 [CommandLine]:BPC1B.uart (none)

20180710T222031 [CommandLine]:BPC1B.baud (bit_per_second)

20180710T222031 [CommandLine]:BPC1.BattTemp_0 (celsius)

20180710T222031 [CommandLine]:BPC1.BattVoltage_0 (millivolt)

20180710T222031 [CommandLine]:BPC1.BattCurrent_0 (ampere)

20180710T222031 [CommandLine]:BPC1.BattCapacity_0 (ampere_hour)

20180710T222031 [CommandLine]:BPC1.BattStatus_0 (enum)

20180710T222031 [CommandLine]:BPC1.BattSerial_0 (count)

20180710T222031 [CommandLine]:BPC1.BattTemp_1 (celsius)

20180710T222031 [CommandLine]:BPC1.BattVoltage_1 (millivolt)

20180710T222031 [CommandLine]:BPC1.BattCurrent_1 (ampere)

20180710T222031 [CommandLine]:BPC1.BattCapacity_1 (ampere_hour)

20180710T222031 [CommandLine]:BPC1.BattStatus_1 (enum)

20180710T222031 [CommandLine]:BPC1.BattSerial_1 (count)

20180710T222031 [CommandLine]:BPC1.BattTemp_2 (celsius)

20180710T222031 [CommandLine]:BPC1.BattVoltage_2 (millivolt)

20180710T222031 [CommandLine]:BPC1.BattCurrent_2 (ampere)

20180710T222031 [CommandLine]:BPC1.BattCapacity_2 (ampere_hour)

20180710T222031 [CommandLine]:BPC1.BattStatus_2 (enum)

20180710T222031 [CommandLine]:BPC1.BattSerial_2 (count)

20180710T222032 [CommandLine]:BPC1.platform_battery_charge (ampere_hour)

20180710T222032 [CommandLine]:BPC1.platform_battery_voltage (unspecified)

20180710T222032 [CommandLine]:BPC1.platform_battery_discharging (bool)

20180710T222032 [CommandLine]:BPC1.platform_battery_fully_charged (bool)

20180710T222032 [CommandLine]:BPC1.durationOfLastRun (second)

20180710T223832 [PNI_TCM]:Failed to acquire valid data within timeout.

20180710T223832 [CBIT]:Data Fault in component: PNI_TCM

20180710T224106 [BPC1]:Failed to receive data from all sticks prior to timeout. Missing data from 2 sticks.

20180710T224106 [CBIT]:Data Fault in component: BPC1

20180710T224141 [CommandLine]:got command get platform_battery_voltage

20180710T224141 [CommandLine]:Element has no value

20180710T224152 [CommandLine]:got command failComponent

20180710T224152 [CommandLine]:Failed components:

20180710T224152 [CommandLine]:Rowe_600LCM: Communications Fault

20180710T224203 [CommandLine]:got command failComponent hardware BPC1

20180710T224203 [CommandLine]:BPC1 failureMode is Hardware Fault

20180710T224203 [CBIT]:Hardware Fault in component: BPC1

20180710T224438 [CommandLine]:got command get platform_battery_voltage

20180710T224438 [CommandLine]:Element has no value

20180710T224659 [CommandLine]:got command report mod platform_battery_voltage

20180710T224724 [CommandLine]:got command report mod BPC1.platform_battery_voltage

20180710T224738 [BPC1]:Failed to parse Bank A battery data

20180710T225239 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20180710T225239 [Rowe_600LCM]:Hardware Fault

20180710T230305 [BPC1]:Failed to receive data from all sticks prior to timeout. Missing data from 2 sticks.

20180710T230305 [CBIT]:Data Fault in component: BPC1