2018-05-23T23:48:07.433Z,1527119287.433 [Supervisor](DEBUG): Initializing supervisor.
2018-05-23T23:48:07.436Z,1527119287.436 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-05-23T23:48:07.437Z,1527119287.437 [SyncHandler](INFO): Protected caller Thread ID is 801
2018-05-23T23:48:07.437Z,1527119287.437 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-05-23T23:48:07.438Z,1527119287.438 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-05-23T23:48:07.438Z,1527119287.438 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 802
2018-05-23T23:48:07.441Z,1527119287.441 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-05-23T23:48:07.453Z,1527119287.453 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-05-23T23:48:07.454Z,1527119287.454 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-05-23T23:48:07.454Z,1527119287.454 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 803
2018-05-23T23:48:07.455Z,1527119287.455 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-05-23T23:48:07.456Z,1527119287.456 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-05-23T23:48:07.456Z,1527119287.456 [logger ThreadHandler](INFO): Protected caller Thread ID is 804
2018-05-23T23:48:07.458Z,1527119287.458 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-05-23T23:48:07.458Z,1527119287.458 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-05-23T23:48:07.462Z,1527119287.462 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-05-23T23:48:07.813Z,1527119287.813 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-05-23T23:48:07.814Z,1527119287.814 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-05-23T23:48:08.031Z,1527119288.031 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-05-23T23:48:08.032Z,1527119288.032 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-05-23T23:48:08.334Z,1527119288.334 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-05-23T23:48:08.336Z,1527119288.336 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-05-23T23:48:08.479Z,1527119288.479 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-05-23T23:48:08.480Z,1527119288.480 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-05-23T23:48:08.579Z,1527119288.579 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-05-23T23:48:08.580Z,1527119288.580 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-05-23T23:48:09.066Z,1527119289.066 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-05-23T23:48:09.068Z,1527119289.068 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-05-23T23:48:09.472Z,1527119289.472 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-05-23T23:48:09.474Z,1527119289.474 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-05-23T23:48:09.946Z,1527119289.946 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-05-23T23:48:09.948Z,1527119289.948 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-05-23T23:48:10.056Z,1527119290.056 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-05-23T23:48:10.057Z,1527119290.057 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-05-23T23:48:10.156Z,1527119290.156 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-05-23T23:48:10.157Z,1527119290.157 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-05-23T23:48:10.371Z,1527119290.371 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-05-23T23:48:10.371Z,1527119290.371 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-05-23T23:48:10.589Z,1527119290.589 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-05-23T23:48:10.590Z,1527119290.590 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-05-23T23:48:10.948Z,1527119290.948 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-05-23T23:48:10.949Z,1527119290.949 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-05-23T23:48:11.534Z,1527119291.534 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-05-23T23:48:11.535Z,1527119291.535 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-05-23T23:48:11.644Z,1527119291.644 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2018-05-23T23:48:11.648Z,1527119291.648 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2018-05-23T23:48:11.815Z,1527119291.815 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2018-05-23T23:48:11.909Z,1527119291.909 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2018-05-23T23:48:12.006Z,1527119292.006 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2018-05-23T23:48:12.093Z,1527119292.093 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2018-05-23T23:48:12.250Z,1527119292.250 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2018-05-23T23:48:12.436Z,1527119292.436 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2018-05-23T23:48:12.514Z,1527119292.514 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2018-05-23T23:48:12.747Z,1527119292.747 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-05-23T23:48:12.748Z,1527119292.748 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2018-05-23T23:48:12.833Z,1527119292.833 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2018-05-23T23:48:12.925Z,1527119292.925 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2018-05-23T23:48:13.029Z,1527119293.029 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2018-05-23T23:48:13.158Z,1527119293.158 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-05-23T23:48:13.172Z,1527119293.172 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-05-23T23:48:13.450Z,1527119293.450 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-05-23T23:48:13.451Z,1527119293.451 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-05-23T23:48:13.506Z,1527119293.506 [DepthRateCalculator] Loaded
2018-05-23T23:48:13.506Z,1527119293.506 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-05-23T23:48:13.512Z,1527119293.512 [PitchRateCalculator] Loaded
2018-05-23T23:48:13.513Z,1527119293.513 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-05-23T23:48:13.528Z,1527119293.528 [SpeedCalculator] Loaded
2018-05-23T23:48:13.529Z,1527119293.529 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-05-23T23:48:13.550Z,1527119293.550 [TempGradientCalculator] Loaded
2018-05-23T23:48:13.550Z,1527119293.550 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-05-23T23:48:13.565Z,1527119293.565 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-05-23T23:48:13.566Z,1527119293.566 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-05-23T23:48:13.572Z,1527119293.572 [YawRateCalculator] Loaded
2018-05-23T23:48:13.572Z,1527119293.572 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-05-23T23:48:13.611Z,1527119293.611 [ElevatorOffsetCalculator] Loaded
2018-05-23T23:48:13.611Z,1527119293.611 [ComponentRegistry](DEBUG): SyncComponent "ElevatorOffsetCalculator" handled in the control thread.
2018-05-23T23:48:13.612Z,1527119293.612 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-05-23T23:48:13.613Z,1527119293.613 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-05-23T23:48:13.733Z,1527119293.733 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-05-23T23:48:13.733Z,1527119293.733 [StratificationFrontDetector](DEBUG): (re)initializing
2018-05-23T23:48:13.733Z,1527119293.733 [StratificationFrontDetector] Loaded
2018-05-23T23:48:13.733Z,1527119293.733 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-05-23T23:48:13.734Z,1527119293.734 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-05-23T23:48:13.735Z,1527119293.735 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-05-23T23:48:13.866Z,1527119293.866 [BuoyancyServo] Loaded
2018-05-23T23:48:13.866Z,1527119293.866 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-05-23T23:48:13.881Z,1527119293.881 [ElevatorServo] Loaded
2018-05-23T23:48:13.881Z,1527119293.881 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-05-23T23:48:13.896Z,1527119293.896 [MassServo] Loaded
2018-05-23T23:48:13.896Z,1527119293.896 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-05-23T23:48:13.911Z,1527119293.911 [RudderServo] Loaded
2018-05-23T23:48:13.911Z,1527119293.911 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-05-23T23:48:13.926Z,1527119293.926 [ThrusterServo] Loaded
2018-05-23T23:48:13.926Z,1527119293.926 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-05-23T23:48:13.926Z,1527119293.926 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-05-23T23:48:13.927Z,1527119293.927 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-05-23T23:48:13.951Z,1527119293.951 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-05-23T23:48:13.952Z,1527119293.952 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-05-23T23:48:14.075Z,1527119294.075 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-05-23T23:48:14.076Z,1527119294.076 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-05-23T23:48:14.631Z,1527119294.631 [DataOverHttps] Loaded
2018-05-23T23:48:14.631Z,1527119294.631 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-05-23T23:48:14.645Z,1527119294.645 [Depth_Keller] Loaded
2018-05-23T23:48:14.645Z,1527119294.645 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-05-23T23:48:14.650Z,1527119294.650 [DropWeight] Loaded
2018-05-23T23:48:14.650Z,1527119294.650 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-05-23T23:48:14.666Z,1527119294.666 [Onboard] Loaded
2018-05-23T23:48:14.666Z,1527119294.666 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-05-23T23:48:14.677Z,1527119294.677 [Radio_Surface] Loaded
2018-05-23T23:48:14.677Z,1527119294.677 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-05-23T23:48:14.678Z,1527119294.678 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 408844E0
2018-05-23T23:48:14.679Z,1527119294.679 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 887
2018-05-23T23:48:14.832Z,1527119294.832 [PNI_TCM] Loaded
2018-05-23T23:48:14.832Z,1527119294.832 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-05-23T23:48:16.851Z,1527119296.851 [BPC1] Loaded
2018-05-23T23:48:16.851Z,1527119296.851 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-05-23T23:48:16.852Z,1527119296.852 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-05-23T23:48:16.854Z,1527119296.854 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-05-23T23:48:17.006Z,1527119297.006 [SBIT](DEBUG): Construct Startup Built In Test.
2018-05-23T23:48:17.028Z,1527119297.028 [SBIT] Loaded
2018-05-23T23:48:17.028Z,1527119297.028 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-05-23T23:48:17.029Z,1527119297.029 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-05-23T23:48:17.048Z,1527119297.048 [IBIT] Loaded
2018-05-23T23:48:17.049Z,1527119297.049 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-05-23T23:48:17.052Z,1527119297.052 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-05-23T23:48:17.200Z,1527119297.200 [CBIT] Loaded
2018-05-23T23:48:17.200Z,1527119297.200 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-05-23T23:48:17.200Z,1527119297.200 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-05-23T23:48:17.201Z,1527119297.201 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-05-23T23:48:17.383Z,1527119297.383 [Aanderaa_O2] Loaded
2018-05-23T23:48:17.383Z,1527119297.383 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-05-23T23:48:17.395Z,1527119297.395 [CANONSampler] Loaded
2018-05-23T23:48:17.395Z,1527119297.395 [ComponentRegistry](DEBUG): SyncComponent "CANONSampler" handled in the control thread.
2018-05-23T23:48:17.471Z,1527119297.471 [CTD_NeilBrown] Loaded
2018-05-23T23:48:17.471Z,1527119297.471 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2018-05-23T23:48:17.472Z,1527119297.472 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 409444E0
2018-05-23T23:48:17.473Z,1527119297.473 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 888
2018-05-23T23:48:17.519Z,1527119297.519 [CTD_Seabird] Loaded
2018-05-23T23:48:17.519Z,1527119297.519 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-05-23T23:48:17.520Z,1527119297.520 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 409744E0
2018-05-23T23:48:17.521Z,1527119297.521 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 889
2018-05-23T23:48:17.537Z,1527119297.537 [ESPComponent] Loaded
2018-05-23T23:48:17.537Z,1527119297.537 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2018-05-23T23:48:17.551Z,1527119297.551 [PAR_Licor] Loaded
2018-05-23T23:48:17.552Z,1527119297.552 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-05-23T23:48:17.601Z,1527119297.601 [WetLabsBB2FL] Loaded
2018-05-23T23:48:17.601Z,1527119297.601 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-05-23T23:48:17.602Z,1527119297.602 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 409A44E0
2018-05-23T23:48:17.602Z,1527119297.602 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 890
2018-05-23T23:48:17.603Z,1527119297.603 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-05-23T23:48:17.604Z,1527119297.604 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-05-23T23:48:17.690Z,1527119297.690 [VerticalControl](DEBUG): Construct VerticalControl.
2018-05-23T23:48:17.774Z,1527119297.774 [VerticalControl] Loaded
2018-05-23T23:48:17.774Z,1527119297.774 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-05-23T23:48:17.775Z,1527119297.775 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-05-23T23:48:17.831Z,1527119297.831 [HorizontalControl] Loaded
2018-05-23T23:48:17.832Z,1527119297.832 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-05-23T23:48:17.832Z,1527119297.832 [SpeedControl](DEBUG): Construct SpeedControl.
2018-05-23T23:48:17.834Z,1527119297.834 [SpeedControl] Loaded
2018-05-23T23:48:17.834Z,1527119297.834 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-05-23T23:48:17.835Z,1527119297.835 [LoopControl](DEBUG): Construct LoopControl.
2018-05-23T23:48:17.835Z,1527119297.835 [LoopControl] Loaded
2018-05-23T23:48:17.836Z,1527119297.836 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-05-23T23:48:17.836Z,1527119297.836 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-05-23T23:48:17.837Z,1527119297.837 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-05-23T23:48:17.874Z,1527119297.874 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-05-23T23:48:17.874Z,1527119297.874 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-05-23T23:48:17.980Z,1527119297.980 [DeadReckonUsingSpeedCalculator] Loaded
2018-05-23T23:48:17.981Z,1527119297.981 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-05-23T23:48:18.035Z,1527119298.035 [DeadReckonWithRespectToSeafloor] Loaded
2018-05-23T23:48:18.036Z,1527119298.036 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-05-23T23:48:18.052Z,1527119298.052 [NavChart] Loaded
2018-05-23T23:48:18.053Z,1527119298.053 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-05-23T23:48:18.057Z,1527119298.057 [UniversalFixResidualReporter] Loaded
2018-05-23T23:48:18.057Z,1527119298.057 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-05-23T23:48:18.058Z,1527119298.058 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-05-23T23:48:18.061Z,1527119298.061 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-05-23T23:48:18.062Z,1527119298.062 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-05-23T23:48:18.069Z,1527119298.069 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-05-23T23:48:18.070Z,1527119298.070 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A304E0
2018-05-23T23:48:18.070Z,1527119298.070 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 891
2018-05-23T23:48:18.075Z,1527119298.075 [Supervisor](INFO): Main Thread ID is 797
2018-05-23T23:48:18.075Z,1527119298.075 [Supervisor](DEBUG): Running supervisor.
2018-05-23T23:48:18.076Z,1527119298.076 [CommandLine ThreadHandler](INFO): Handler Thread ID is 892
2018-05-23T23:48:18.078Z,1527119298.078 [controlThread ThreadHandler](INFO): Handler Thread ID is 893
2018-05-23T23:48:18.079Z,1527119298.079 [controlThread](DEBUG): Initializing ControlThread
2018-05-23T23:48:18.079Z,1527119298.079 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-05-23T23:48:18.080Z,1527119298.080 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-05-23T23:48:18.080Z,1527119298.080 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-05-23T23:48:18.080Z,1527119298.080 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-05-23T23:48:18.081Z,1527119298.081 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-05-23T23:48:18.082Z,1527119298.082 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-05-23T23:48:18.082Z,1527119298.082 [ElevatorOffsetCalculator](DEBUG): Initializing ElevatorOffsetCalculator.
2018-05-23T23:48:18.087Z,1527119298.087 [SBIT](INFO): Initialize SBIT Component.
2018-05-23T23:48:18.088Z,1527119298.088 [SBIT](IMPORTANT): git: 2018-05-17
2018-05-23T23:48:18.088Z,1527119298.088 [SBIT](INFO): git hash: 418d027d9554c4aed44cef59bd1b73332cce0e52
2018-05-23T23:48:18.088Z,1527119298.088 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-05-23T23:48:18.089Z,1527119298.089 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-05-23T23:48:18.090Z,1527119298.090 [SBIT](INFO): Beginning SBIT in 23.000000 seconds.
2018-05-23T23:48:18.091Z,1527119298.091 [IBIT](INFO): Initialize IBIT Component.
2018-05-23T23:48:18.092Z,1527119298.092 [CBIT](DEBUG): Initialize CBIT Component.
2018-05-23T23:48:18.092Z,1527119298.092 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-05-23T23:48:18.093Z,1527119298.093 [logger ThreadHandler](INFO): Handler Thread ID is 894
2018-05-23T23:48:18.114Z,1527119298.114 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 895
2018-05-23T23:48:18.119Z,1527119298.119 [Radio_Surface](INFO): Powering up
2018-05-23T23:48:18.125Z,1527119298.125 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 896
2018-05-23T23:48:18.126Z,1527119298.126 [CTD_NeilBrown](INFO): Powering down
2018-05-23T23:48:18.153Z,1527119298.153 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 897
2018-05-23T23:48:18.154Z,1527119298.154 [CTD_Seabird](INFO): Initializing
2018-05-23T23:48:18.154Z,1527119298.154 [CTD_Seabird](INFO): Checking LCM
2018-05-23T23:48:18.201Z,1527119298.201 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-05-23T23:48:18.203Z,1527119298.203 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-05-23T23:48:18.203Z,1527119298.203 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-05-23T23:48:18.204Z,1527119298.204 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-05-23T23:48:18.204Z,1527119298.204 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-23T23:48:18.206Z,1527119298.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-23T23:48:18.206Z,1527119298.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-23T23:48:18.208Z,1527119298.208 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-23T23:48:18.213Z,1527119298.213 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-23T23:48:18.214Z,1527119298.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-23T23:48:18.216Z,1527119298.216 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-05-23T23:48:18.217Z,1527119298.217 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-05-23T23:48:18.218Z,1527119298.218 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-05-23T23:48:18.279Z,1527119298.279 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 898
2018-05-23T23:48:18.280Z,1527119298.280 [WetLabsBB2FL](INFO): Powering down
2018-05-23T23:48:18.377Z,1527119298.377 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 899
2018-05-23T23:48:18.387Z,1527119298.387 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-05-23T23:48:18.387Z,1527119298.387 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-05-23T23:48:18.387Z,1527119298.387 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-05-23T23:48:18.387Z,1527119298.387 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-05-23T23:48:18.388Z,1527119298.388 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-05-23T23:48:18.388Z,1527119298.388 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-05-23T23:48:18.388Z,1527119298.388 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-05-23T23:48:18.388Z,1527119298.388 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-05-23T23:48:18.388Z,1527119298.388 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-05-23T23:48:18.389Z,1527119298.389 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-05-23T23:48:18.389Z,1527119298.389 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-05-23T23:48:18.389Z,1527119298.389 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-05-23T23:48:18.389Z,1527119298.389 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-05-23T23:48:18.389Z,1527119298.389 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-05-23T23:48:18.390Z,1527119298.390 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-05-23T23:48:18.390Z,1527119298.390 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-05-23T23:48:18.406Z,1527119298.406 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-05-23T23:48:18.522Z,1527119298.522 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-05-23T23:48:18.529Z,1527119298.529 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-05-23T23:48:18.604Z,1527119298.604 [CTD_Seabird](INFO): LCM OK
2018-05-23T23:48:18.604Z,1527119298.604 [CTD_Seabird](INFO): Powering up
2018-05-23T23:48:18.647Z,1527119298.647 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-05-23T23:48:18.650Z,1527119298.650 [Default:A.Wait](DEBUG): Construct Wait.
2018-05-23T23:48:18.652Z,1527119298.652 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-05-23T23:48:18.704Z,1527119298.704 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-05-23T23:48:18.707Z,1527119298.707 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-05-23T23:48:18.729Z,1527119298.729 [Default:E.Execute](DEBUG): Construct Execute.
2018-05-23T23:48:18.736Z,1527119298.736 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xmlns="Tethys"
         xmlns:Units="Tethys/Units"
         xmlns:Guidance="Tethys/Guidance"
         xmlns:Universal="Tethys/Universal"
         xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                             Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                             Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                             Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
         Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Sequence/>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-05-23T23:48:18.742Z,1527119298.742 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,Onboard,PNI_TCM,BPC1,Aanderaa_O2,CANONSampler,ESPComponent,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,ElevatorOffsetCalculator,StratificationFrontDetector,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-05-23T23:48:18.774Z,1527119298.774 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-05-23T23:48:18.789Z,1527119298.789 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2018-05-23T23:48:19.039Z,1527119299.039 [CANONSampler](INFO): Powering down
2018-05-23T23:48:19.277Z,1527119299.277 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-05-23T23:48:19.377Z,1527119299.377 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:19.503Z,1527119299.503 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:19.613Z,1527119299.613 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-05-23T23:48:19.621Z,1527119299.621 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-05-23T23:48:19.649Z,1527119299.649 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-05-23T23:48:19.657Z,1527119299.657 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-05-23T23:48:19.675Z,1527119299.675 [MassServo](DEBUG): Initializing EZServoServo.
2018-05-23T23:48:19.681Z,1527119299.681 [MassServo](DEBUG): Initializing MassServo.
2018-05-23T23:48:19.703Z,1527119299.703 [RudderServo](DEBUG): Initializing EZServoServo.
2018-05-23T23:48:19.709Z,1527119299.709 [RudderServo](DEBUG): Initializing RudderServo.
2018-05-23T23:48:19.723Z,1527119299.723 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-05-23T23:48:19.729Z,1527119299.729 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-05-23T23:48:20.077Z,1527119300.077 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:20.078Z,1527119300.078 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:20.299Z,1527119300.299 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:20.300Z,1527119300.300 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:20.829Z,1527119300.829 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:20.830Z,1527119300.830 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:21.233Z,1527119301.233 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:21.234Z,1527119301.234 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:21.629Z,1527119301.629 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:21.630Z,1527119301.630 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:22.003Z,1527119302.003 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:22.004Z,1527119302.004 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:22.513Z,1527119302.513 [Aanderaa_O2](INFO): Powering down
2018-05-23T23:48:22.629Z,1527119302.629 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:22.630Z,1527119302.630 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-05-23T23:48:24.033Z,1527119304.033 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-05-23T23:48:24.156Z,1527119304.156 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-05-23T23:48:24.300Z,1527119304.300 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-05-23T23:48:24.705Z,1527119304.705 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-05-23T23:48:24.705Z,1527119304.705 [CTD_Seabird](INFO): Powering down
2018-05-23T23:48:41.697Z,1527119321.697 [SBIT](IMPORTANT): Beginning Startup BIT
2018-05-23T23:48:41.701Z,1527119321.701 [CBIT](IMPORTANT): Beginning ground fault scan
2018-05-23T23:48:52.645Z,1527119332.645 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.001604
CHAN A1 (24V): 4.657929
CHAN A2 (12V): -0.002064
CHAN A3 (5V): -0.001569
CHAN B0 (3.3V): -0.000115
CHAN B1 (3.15aV): -0.000541
CHAN B2 (3.15bV): -0.000652
CHAN B3 (GND): 0.000080
OPEN: -0.000365
Full Scale Calc: 4.765 mA, -1.589 mA
2018-05-23T23:49:35.726Z,1527119375.726 [SBIT](IMPORTANT): SBIT PASSED
2018-05-23T23:49:35.751Z,1527119375.751 [CommandLine](IMPORTANT): got command configSet list
2018-05-23T23:49:35.751Z,1527119375.751 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-05-23T23:49:35.752Z,1527119375.752 [CommandLine](IMPORTANT): ESPComponent.loadAtStartup=1 bool;

2018-05-23T23:49:35.752Z,1527119375.752 [CommandLine](IMPORTANT): ESPComponent.simulateHardware=1 bool;

2018-05-23T23:49:35.752Z,1527119375.752 [CommandLine](IMPORTANT): NAL9602.loadAtStartup=0 bool;

2018-05-23T23:49:35.753Z,1527119375.753 [CommandLine](IMPORTANT): Normal linearApproximation CTD_NeilBrown.bin_mean_sea_water_salinity 0.020000 practical_salinity_unit;

2018-05-23T23:49:35.753Z,1527119375.753 [CommandLine](IMPORTANT): Normal linearApproximation CTD_NeilBrown.bin_mean_sea_water_temperature 0.150000 kelvin;

2018-05-23T23:49:35.753Z,1527119375.753 [CommandLine](IMPORTANT): Normal linearApproximation CTD_Seabird.bin_median_sea_water_salinity 0.020000 practical_salinity_unit;

2018-05-23T23:49:35.753Z,1527119375.753 [CommandLine](IMPORTANT): Normal linearApproximation CTD_Seabird.bin_median_sea_water_temperature 0.150000 kelvin;

2018-05-23T23:49:35.753Z,1527119375.753 [CommandLine](IMPORTANT): Normal linearApproximation WetLabsBB2FL.bin_mean_mass_concentration_of_chlorophyll_in_sea_water 0.100000 microgram_per_liter;

2018-05-23T23:49:35.753Z,1527119375.753 [CommandLine](IMPORTANT): Rowe_600LCM.loadAtStartup=0 bool;

2018-05-23T23:49:36.113Z,1527119376.113 [MissionManager](IMPORTANT): Started mission Startup
2018-05-23T23:49:36.113Z,1527119376.113 [Startup] Running Loop=1
2018-05-23T23:49:36.113Z,1527119376.113 [Startup](DEBUG): Aggregate::initialize Startup
2018-05-23T23:49:36.113Z,1527119376.113 [Startup:A.GoToSurface] Running Loop=1
2018-05-23T23:49:36.113Z,1527119376.113 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-05-23T23:49:36.114Z,1527119376.114 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-05-23T23:49:36.114Z,1527119376.114 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-05-23T23:49:36.115Z,1527119376.115 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-05-23T23:49:36.115Z,1527119376.115 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-05-23T23:49:36.116Z,1527119376.116 [Startup:A.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-05-23T23:49:36.147Z,1527119376.147 [Startup:StartupSatComms] Running Loop=1
2018-05-23T23:49:36.147Z,1527119376.147 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-05-23T23:49:36.147Z,1527119376.147 [Startup:StartupSatComms:A] Running Loop=1
2018-05-23T23:49:36.514Z,1527119376.514 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-05-23T23:49:54.187Z,1527119394.187 [CommandLine](IMPORTANT): got command get NAL9602.loadAtStartup
2018-05-23T23:49:54.187Z,1527119394.187 [CommandLine](IMPORTANT): NAL9602.loadAtStartup 0 bool
2018-05-23T23:50:36.522Z,1527119436.522 [Startup:StartupSatComms:A](INFO): Timed out from 2018-05-23T23:49:36.1Z
2018-05-23T23:50:36.522Z,1527119436.522 [Startup:StartupSatComms:A] Stopped
2018-05-23T23:50:36.522Z,1527119436.522 [Startup:StartupSatComms:B] Running Loop=1
2018-05-23T23:50:36.921Z,1527119436.921 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-05-23T23:50:50.454Z,1527119450.454 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.004480
2018-05-23T23:50:54.452Z,1527119454.452 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T221757/Courier0031.lzma
2018-05-23T23:50:55.215Z,1527119455.215 [DataOverHttps](INFO): Moved sent file to Logs/20180523T221757/Courier0031.lzma.bak
2018-05-23T23:50:55.216Z,1527119455.216 [DataOverHttps](INFO): SBD MOMSN=8291311
2018-05-23T23:51:03.968Z,1527119463.968 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180523T234441/Courier0000.lzma
2018-05-23T23:51:04.766Z,1527119464.766 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234441/Courier0000.lzma.bak
2018-05-23T23:51:04.766Z,1527119464.766 [DataOverHttps](INFO): SBD MOMSN=8291313
2018-05-23T23:51:13.998Z,1527119473.998 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234441/Courier0004.lzma
2018-05-23T23:51:14.740Z,1527119474.740 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234441/Courier0004.lzma.bak
2018-05-23T23:51:14.740Z,1527119474.740 [DataOverHttps](INFO): SBD MOMSN=8291317
2018-05-23T23:51:18.711Z,1527119478.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-23T23:51:18.711Z,1527119478.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-23T23:51:18.711Z,1527119478.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-23T23:51:18.713Z,1527119478.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-23T23:51:18.713Z,1527119478.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-23T23:51:18.713Z,1527119478.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-23T23:51:18.724Z,1527119478.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-23T23:51:18.725Z,1527119478.725 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-23T23:51:18.869Z,1527119478.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-23T23:51:18.869Z,1527119478.869 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-23T23:51:18.870Z,1527119478.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-23T23:51:18.870Z,1527119478.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-23T23:51:19.183Z,1527119479.183 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-23T23:51:19.183Z,1527119479.183 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-23T23:51:19.184Z,1527119479.184 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-23T23:51:19.184Z,1527119479.184 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-23T23:51:19.184Z,1527119479.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-23T23:51:19.185Z,1527119479.185 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-23T23:51:23.535Z,1527119483.535 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180523T234807/Courier0000.lzma
2018-05-23T23:51:24.298Z,1527119484.298 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0000.lzma.bak
2018-05-23T23:51:24.298Z,1527119484.298 [DataOverHttps](INFO): SBD MOMSN=8291319
2018-05-23T23:51:33.136Z,1527119493.136 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20180523T221757/Express0032.lzma
2018-05-23T23:51:33.906Z,1527119493.906 [DataOverHttps](INFO): Moved sent file to Logs/20180523T221757/Express0032.lzma.bak
2018-05-23T23:51:33.906Z,1527119493.906 [DataOverHttps](INFO): SBD MOMSN=8291322
2018-05-23T23:51:38.003Z,1527119498.003 [Startup:StartupSatComms:B](INFO): Timed out from 2018-05-23T23:50:36.5Z
2018-05-23T23:51:38.003Z,1527119498.003 [Startup:StartupSatComms:B] Stopped
2018-05-23T23:51:38.003Z,1527119498.003 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-05-23T23:51:38.003Z,1527119498.003 [Startup:StartupSatComms] Stopped
2018-05-23T23:51:38.003Z,1527119498.003 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-05-23T23:51:38.004Z,1527119498.004 [Startup](INFO): Completed Startup
2018-05-23T23:51:38.004Z,1527119498.004 [MissionManager](INFO): Startup is completed.
2018-05-23T23:51:38.005Z,1527119498.005 [MissionManager](INFO): Uninitializing Mission Startup
2018-05-23T23:51:38.005Z,1527119498.005 [Startup] Stopped
2018-05-23T23:51:38.005Z,1527119498.005 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-05-23T23:51:38.005Z,1527119498.005 [Startup:A.GoToSurface] Stopped
2018-05-23T23:51:38.005Z,1527119498.005 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-05-23T23:51:38.137Z,1527119498.137 [MissionManager](IMPORTANT): Started mission Default
2018-05-23T23:51:38.137Z,1527119498.137 [Default] Running Loop=1
2018-05-23T23:51:38.137Z,1527119498.137 [Default](DEBUG): Aggregate::initialize Default
2018-05-23T23:51:38.138Z,1527119498.138 [Default:B.GoToSurface] Running Loop=1
2018-05-23T23:51:38.138Z,1527119498.138 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-05-23T23:51:38.138Z,1527119498.138 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-05-23T23:51:38.138Z,1527119498.138 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-05-23T23:51:38.139Z,1527119498.139 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-05-23T23:51:38.139Z,1527119498.139 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-05-23T23:51:38.139Z,1527119498.139 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-05-23T23:51:38.140Z,1527119498.140 [Default:A.Wait] Running Loop=1
2018-05-23T23:51:38.140Z,1527119498.140 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-05-23T23:51:42.816Z,1527119502.816 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20180523T234015/Express0001.lzma
2018-05-23T23:51:43.614Z,1527119503.614 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234015/Express0001.lzma.bak
2018-05-23T23:51:43.614Z,1527119503.614 [DataOverHttps](INFO): SBD MOMSN=8291330
2018-05-23T23:51:51.262Z,1527119511.262 [Default:A.Wait](INFO): Done Waiting.
2018-05-23T23:51:51.262Z,1527119511.262 [Default:A.Wait] Stopped
2018-05-23T23:51:51.262Z,1527119511.262 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-05-23T23:51:51.673Z,1527119511.673 [Default:CheckIn] Running Loop=1
2018-05-23T23:51:51.673Z,1527119511.673 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-23T23:51:51.673Z,1527119511.673 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-23T23:51:52.095Z,1527119512.095 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-05-23T23:54:19.216Z,1527119659.216 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-23T23:54:19.216Z,1527119659.216 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-23T23:54:19.216Z,1527119659.216 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-23T23:54:19.218Z,1527119659.218 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-23T23:54:19.218Z,1527119659.218 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-23T23:54:19.218Z,1527119659.218 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-23T23:54:19.230Z,1527119659.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-23T23:54:19.231Z,1527119659.231 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-23T23:54:19.623Z,1527119659.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-23T23:54:19.623Z,1527119659.623 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-23T23:54:19.623Z,1527119659.623 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-23T23:54:19.623Z,1527119659.623 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-23T23:54:20.022Z,1527119660.022 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-23T23:54:20.022Z,1527119660.022 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-23T23:54:20.023Z,1527119660.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-23T23:54:20.023Z,1527119660.023 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-23T23:54:20.024Z,1527119660.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-23T23:54:20.024Z,1527119660.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-23T23:56:51.766Z,1527119811.766 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-23T23:51:51.7Z
2018-05-23T23:56:51.766Z,1527119811.766 [Default:CheckIn:Read_GPS] Stopped
2018-05-23T23:56:51.766Z,1527119811.766 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-23T23:56:52.184Z,1527119812.184 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-05-23T23:57:00.028Z,1527119820.028 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0004.lzma
2018-05-23T23:57:00.803Z,1527119820.803 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0004.lzma.bak
2018-05-23T23:57:00.803Z,1527119820.803 [DataOverHttps](INFO): SBD MOMSN=8291333
2018-05-23T23:57:17.576Z,1527119837.576 [DataOverHttps](INFO): Sending 928 bytes from file Logs/20180523T234441/Express0001.lzma
2018-05-23T23:57:18.371Z,1527119838.371 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234441/Express0001.lzma.bak
2018-05-23T23:57:18.371Z,1527119838.371 [DataOverHttps](INFO): SBD MOMSN=8291335
2018-05-23T23:57:26.602Z,1527119846.602 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-23T23:57:26.603Z,1527119846.603 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-23T23:57:26.603Z,1527119846.603 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-23T23:57:26.604Z,1527119846.604 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-23T23:57:26.604Z,1527119846.604 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-23T23:57:26.605Z,1527119846.605 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-23T23:57:26.624Z,1527119846.624 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-23T23:57:26.625Z,1527119846.625 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-23T23:57:26.783Z,1527119846.783 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-23T23:57:26.783Z,1527119846.783 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-23T23:57:26.784Z,1527119846.784 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-23T23:57:26.784Z,1527119846.784 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-23T23:57:27.113Z,1527119847.113 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-23T23:57:27.113Z,1527119847.113 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-23T23:57:27.114Z,1527119847.114 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-23T23:57:27.114Z,1527119847.114 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-23T23:57:27.114Z,1527119847.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-23T23:57:27.115Z,1527119847.115 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-23T23:57:35.010Z,1527119855.010 [DataOverHttps](INFO): Sending 39 bytes from file Logs/20180523T234441/Express0005.lzma
2018-05-23T23:57:35.790Z,1527119855.790 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234441/Express0005.lzma.bak
2018-05-23T23:57:35.790Z,1527119855.790 [DataOverHttps](INFO): SBD MOMSN=8291362
2018-05-23T23:57:52.528Z,1527119872.528 [DataOverHttps](INFO): Sending 839 bytes from file Logs/20180523T234807/Express0001.lzma
2018-05-23T23:57:53.298Z,1527119873.298 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0001.lzma.bak
2018-05-23T23:57:53.298Z,1527119873.298 [DataOverHttps](INFO): SBD MOMSN=8291364
2018-05-23T23:58:09.945Z,1527119889.945 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180523T234807/Express0005.lzma
2018-05-23T23:58:10.742Z,1527119890.742 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0005.lzma.bak
2018-05-23T23:58:10.742Z,1527119890.742 [DataOverHttps](INFO): SBD MOMSN=8291387
2018-05-23T23:58:12.087Z,1527119892.087 [Default:CheckIn:Read_Iridium] Stopped
2018-05-23T23:58:12.087Z,1527119892.087 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-23T23:58:12.088Z,1527119892.088 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-23T23:58:19.182Z,1527119899.182 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-23T23:58:27.664Z,1527119907.664 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.396221 seconds old.
2018-05-23T23:58:27.665Z,1527119907.665 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396856 seconds old.
2018-05-23T23:58:28.039Z,1527119908.039 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.771898 seconds old.
2018-05-23T23:58:28.069Z,1527119908.069 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.772307 seconds old.
2018-05-23T23:58:28.483Z,1527119908.483 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.215760 seconds old.
2018-05-23T23:58:28.484Z,1527119908.484 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.216196 seconds old.
2018-05-24T00:00:27.197Z,1527120027.197 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:00:27.198Z,1527120027.198 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T00:00:27.198Z,1527120027.198 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:00:27.199Z,1527120027.199 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:00:27.200Z,1527120027.200 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T00:00:27.200Z,1527120027.200 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:00:27.253Z,1527120027.253 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:00:27.254Z,1527120027.254 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:00:27.614Z,1527120027.614 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:00:27.614Z,1527120027.614 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T00:00:27.614Z,1527120027.614 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:00:27.614Z,1527120027.614 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T00:00:27.971Z,1527120027.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:00:27.972Z,1527120027.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:00:27.972Z,1527120027.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:00:27.972Z,1527120027.972 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:00:27.000Z,1527120028.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:00:27.000Z,1527120028.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:03:12.333Z,1527120192.333 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T00:03:12.334Z,1527120192.334 [Default:CheckIn:C.Wait] Stopped
2018-05-24T00:03:12.334Z,1527120192.334 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T00:03:12.334Z,1527120192.334 [Default:CheckIn:D] Running Loop=1
2018-05-24T00:03:12.761Z,1527120192.761 [Default:CheckIn:D] Stopped
2018-05-24T00:03:12.761Z,1527120192.761 [Default:CheckIn:E] Running Loop=1
2018-05-24T00:03:13.151Z,1527120193.151 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 11.576887 min 
2018-05-24T00:03:13.157Z,1527120193.157 [Default:CheckIn:E] Stopped
2018-05-24T00:03:13.157Z,1527120193.157 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T00:03:13.158Z,1527120193.158 [Default:CheckIn] Stopped
2018-05-24T00:03:13.158Z,1527120193.158 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T00:03:13.158Z,1527120193.158 [Default:CheckIn](INFO): Running loop #2
2018-05-24T00:03:13.158Z,1527120193.158 [Default:CheckIn] Running Loop=2
2018-05-24T00:03:13.158Z,1527120193.158 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T00:03:13.158Z,1527120193.158 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T00:03:28.335Z,1527120208.335 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:03:28.335Z,1527120208.335 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T00:03:28.335Z,1527120208.335 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:03:28.353Z,1527120208.353 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:03:28.353Z,1527120208.353 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T00:03:28.354Z,1527120208.354 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:03:28.395Z,1527120208.395 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:03:28.395Z,1527120208.395 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:03:28.749Z,1527120208.749 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:03:28.749Z,1527120208.749 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T00:03:28.750Z,1527120208.750 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:03:28.750Z,1527120208.750 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T00:03:29.132Z,1527120209.132 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:03:29.132Z,1527120209.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:03:29.133Z,1527120209.133 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:03:29.145Z,1527120209.145 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:03:29.145Z,1527120209.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:03:29.145Z,1527120209.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:06:29.333Z,1527120389.333 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:06:29.333Z,1527120389.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T00:06:29.333Z,1527120389.333 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:06:29.335Z,1527120389.335 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:06:29.335Z,1527120389.335 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T00:06:29.335Z,1527120389.335 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:06:29.347Z,1527120389.347 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:06:29.347Z,1527120389.347 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:06:29.770Z,1527120389.770 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:06:29.770Z,1527120389.770 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T00:06:29.771Z,1527120389.771 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:06:29.771Z,1527120389.771 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T00:06:30.108Z,1527120390.108 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:06:30.108Z,1527120390.108 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:06:30.129Z,1527120390.129 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:06:30.129Z,1527120390.129 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:06:30.130Z,1527120390.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:06:30.130Z,1527120390.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:08:13.324Z,1527120493.324 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T00:03:13.2Z
2018-05-24T00:08:13.324Z,1527120493.324 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T00:08:13.324Z,1527120493.324 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T00:08:21.255Z,1527120501.255 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T00:08:21.298Z,1527120501.298 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0007.lzma
2018-05-24T00:08:22.066Z,1527120502.066 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0007.lzma.bak
2018-05-24T00:08:22.066Z,1527120502.066 [DataOverHttps](INFO): SBD MOMSN=8291390
2018-05-24T00:08:38.710Z,1527120518.710 [DataOverHttps](INFO): Sending 130 bytes from file Logs/20180523T234807/Express0008.lzma
2018-05-24T00:08:39.474Z,1527120519.474 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0008.lzma.bak
2018-05-24T00:08:39.474Z,1527120519.474 [DataOverHttps](INFO): SBD MOMSN=8291392
2018-05-24T00:08:41.055Z,1527120521.055 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T00:08:41.055Z,1527120521.055 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T00:08:41.056Z,1527120521.056 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T00:09:30.450Z,1527120570.450 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:09:30.450Z,1527120570.450 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T00:09:30.450Z,1527120570.450 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:09:30.451Z,1527120570.451 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:09:30.452Z,1527120570.452 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T00:09:30.452Z,1527120570.452 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:09:30.479Z,1527120570.479 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:09:30.480Z,1527120570.480 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:09:30.882Z,1527120570.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:09:30.882Z,1527120570.882 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T00:09:30.882Z,1527120570.882 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:09:30.882Z,1527120570.882 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T00:09:31.234Z,1527120571.234 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:09:31.235Z,1527120571.235 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:09:31.235Z,1527120571.235 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:09:31.236Z,1527120571.236 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:09:31.236Z,1527120571.236 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:09:31.236Z,1527120571.236 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:12:31.598Z,1527120751.598 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:12:31.598Z,1527120751.598 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T00:12:31.598Z,1527120751.598 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:12:31.600Z,1527120751.600 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:12:31.600Z,1527120751.600 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T00:12:31.600Z,1527120751.600 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:12:31.620Z,1527120751.620 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:12:31.620Z,1527120751.620 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:12:31.999Z,1527120751.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:12:31.999Z,1527120751.999 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T00:12:31.999Z,1527120751.999 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:12:31.999Z,1527120751.999 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T00:12:32.395Z,1527120752.395 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:12:32.395Z,1527120752.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:12:32.396Z,1527120752.396 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:12:32.396Z,1527120752.396 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:12:32.396Z,1527120752.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:12:32.397Z,1527120752.397 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:13:41.570Z,1527120821.570 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T00:13:41.570Z,1527120821.570 [Default:CheckIn:C.Wait] Stopped
2018-05-24T00:13:41.570Z,1527120821.570 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T00:13:41.570Z,1527120821.570 [Default:CheckIn:D] Running Loop=1
2018-05-24T00:13:41.964Z,1527120821.964 [Default:CheckIn:D] Stopped
2018-05-24T00:13:41.964Z,1527120821.964 [Default:CheckIn:E] Running Loop=1
2018-05-24T00:13:42.367Z,1527120822.367 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 22.063780 min 
2018-05-24T00:13:42.368Z,1527120822.368 [Default:CheckIn:E] Stopped
2018-05-24T00:13:42.368Z,1527120822.368 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T00:13:42.368Z,1527120822.368 [Default:CheckIn] Stopped
2018-05-24T00:13:42.368Z,1527120822.368 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T00:13:42.368Z,1527120822.368 [Default:CheckIn](INFO): Running loop #3
2018-05-24T00:13:42.368Z,1527120822.368 [Default:CheckIn] Running Loop=3
2018-05-24T00:13:42.368Z,1527120822.368 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T00:13:42.369Z,1527120822.369 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T00:15:32.700Z,1527120932.700 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:15:32.700Z,1527120932.700 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T00:15:32.700Z,1527120932.700 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:15:32.702Z,1527120932.702 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:15:32.702Z,1527120932.702 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T00:15:32.702Z,1527120932.702 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:15:32.714Z,1527120932.714 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:15:32.714Z,1527120932.714 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:15:33.115Z,1527120933.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:15:33.115Z,1527120933.115 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T00:15:33.116Z,1527120933.116 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:15:33.116Z,1527120933.116 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T00:15:33.505Z,1527120933.505 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:15:33.506Z,1527120933.506 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:15:33.506Z,1527120933.506 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:15:33.506Z,1527120933.506 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:15:33.507Z,1527120933.507 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:15:33.507Z,1527120933.507 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:18:21.460Z,1527121101.460 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T00:18:33.849Z,1527121113.849 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:18:33.849Z,1527121113.849 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T00:18:33.849Z,1527121113.849 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:18:33.851Z,1527121113.851 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:18:33.851Z,1527121113.851 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T00:18:33.851Z,1527121113.851 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:18:33.863Z,1527121113.863 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:18:33.863Z,1527121113.863 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:18:34.265Z,1527121114.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:18:34.265Z,1527121114.265 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T00:18:34.266Z,1527121114.266 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:18:34.266Z,1527121114.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T00:18:34.655Z,1527121114.655 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:18:34.655Z,1527121114.655 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:18:34.656Z,1527121114.656 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:18:34.656Z,1527121114.656 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:18:34.656Z,1527121114.656 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:18:34.657Z,1527121114.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:18:42.662Z,1527121122.662 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T00:13:42.4Z
2018-05-24T00:18:42.662Z,1527121122.662 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T00:18:42.662Z,1527121122.662 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T00:18:46.981Z,1527121126.981 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0010.lzma
2018-05-24T00:18:47.782Z,1527121127.782 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0010.lzma.bak
2018-05-24T00:18:47.782Z,1527121127.782 [DataOverHttps](INFO): SBD MOMSN=8291395
2018-05-24T00:18:56.630Z,1527121136.630 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180523T234807/Express0011.lzma
2018-05-24T00:18:57.398Z,1527121137.398 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0011.lzma.bak
2018-05-24T00:18:57.398Z,1527121137.398 [DataOverHttps](INFO): SBD MOMSN=8291397
2018-05-24T00:18:58.268Z,1527121138.268 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T00:18:58.268Z,1527121138.268 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T00:18:58.268Z,1527121138.268 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T00:21:34.675Z,1527121294.675 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:21:34.675Z,1527121294.675 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T00:21:34.675Z,1527121294.675 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:21:34.677Z,1527121294.677 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:21:34.677Z,1527121294.677 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T00:21:34.677Z,1527121294.677 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:21:34.705Z,1527121294.705 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:21:34.705Z,1527121294.705 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:21:35.090Z,1527121295.090 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:21:35.090Z,1527121295.090 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T00:21:35.090Z,1527121295.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:21:35.090Z,1527121295.090 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T00:21:35.476Z,1527121295.476 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:21:35.476Z,1527121295.476 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:21:35.477Z,1527121295.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:21:35.477Z,1527121295.477 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:21:35.478Z,1527121295.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:21:35.478Z,1527121295.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:23:58.625Z,1527121438.625 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T00:23:58.625Z,1527121438.625 [Default:CheckIn:C.Wait] Stopped
2018-05-24T00:23:58.626Z,1527121438.626 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T00:23:58.626Z,1527121438.626 [Default:CheckIn:D] Running Loop=1
2018-05-24T00:23:59.019Z,1527121439.019 [Default:CheckIn:D] Stopped
2018-05-24T00:23:59.019Z,1527121439.019 [Default:CheckIn:E] Running Loop=1
2018-05-24T00:23:59.420Z,1527121439.420 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 32.348029 min 
2018-05-24T00:23:59.421Z,1527121439.421 [Default:CheckIn:E] Stopped
2018-05-24T00:23:59.421Z,1527121439.421 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T00:23:59.421Z,1527121439.421 [Default:CheckIn] Stopped
2018-05-24T00:23:59.421Z,1527121439.421 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T00:23:59.421Z,1527121439.421 [Default:CheckIn](INFO): Running loop #4
2018-05-24T00:23:59.421Z,1527121439.421 [Default:CheckIn] Running Loop=4
2018-05-24T00:23:59.422Z,1527121439.422 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T00:23:59.422Z,1527121439.422 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T00:24:35.782Z,1527121475.782 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:24:35.782Z,1527121475.782 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T00:24:35.782Z,1527121475.782 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:24:35.784Z,1527121475.784 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:24:35.784Z,1527121475.784 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T00:24:35.784Z,1527121475.784 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:24:35.796Z,1527121475.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:24:35.813Z,1527121475.813 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:24:36.198Z,1527121476.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:24:36.198Z,1527121476.198 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T00:24:36.199Z,1527121476.199 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:24:36.199Z,1527121476.199 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T00:24:36.587Z,1527121476.587 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:24:36.587Z,1527121476.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:24:36.588Z,1527121476.588 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:24:36.588Z,1527121476.588 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:24:36.588Z,1527121476.588 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:24:36.589Z,1527121476.589 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:27:36.906Z,1527121656.906 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:27:36.906Z,1527121656.906 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T00:27:36.906Z,1527121656.906 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:27:36.908Z,1527121656.908 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:27:36.908Z,1527121656.908 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T00:27:36.908Z,1527121656.908 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:27:36.936Z,1527121656.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:27:36.936Z,1527121656.936 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:27:37.358Z,1527121657.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:27:37.358Z,1527121657.358 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T00:27:37.358Z,1527121657.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:27:37.358Z,1527121657.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T00:27:37.711Z,1527121657.711 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:27:37.711Z,1527121657.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:27:37.712Z,1527121657.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:27:37.712Z,1527121657.712 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:27:37.712Z,1527121657.712 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:27:37.713Z,1527121657.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:28:21.702Z,1527121701.702 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T00:28:59.681Z,1527121739.681 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T00:23:59.4Z
2018-05-24T00:28:59.682Z,1527121739.682 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T00:28:59.682Z,1527121739.682 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T00:29:04.037Z,1527121744.037 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0013.lzma
2018-05-24T00:29:04.796Z,1527121744.796 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0013.lzma.bak
2018-05-24T00:29:04.796Z,1527121744.796 [DataOverHttps](INFO): SBD MOMSN=8291400
2018-05-24T00:29:13.649Z,1527121753.649 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180523T234807/Express0014.lzma
2018-05-24T00:29:14.438Z,1527121754.438 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0014.lzma.bak
2018-05-24T00:29:14.438Z,1527121754.438 [DataOverHttps](INFO): SBD MOMSN=8291402
2018-05-24T00:29:15.294Z,1527121755.294 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T00:29:15.294Z,1527121755.294 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T00:29:15.294Z,1527121755.294 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T00:30:37.747Z,1527121837.747 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:30:37.747Z,1527121837.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T00:30:37.748Z,1527121837.748 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:30:37.761Z,1527121837.761 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:30:37.761Z,1527121837.761 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T00:30:37.762Z,1527121837.761 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:30:37.774Z,1527121837.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:30:37.774Z,1527121837.774 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:30:38.163Z,1527121838.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:30:38.163Z,1527121838.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T00:30:38.163Z,1527121838.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:30:38.163Z,1527121838.163 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T00:30:38.556Z,1527121838.556 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:30:38.556Z,1527121838.556 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:30:38.557Z,1527121838.557 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:30:38.558Z,1527121838.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:30:38.558Z,1527121838.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:30:38.559Z,1527121838.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:33:38.908Z,1527122018.908 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:33:38.908Z,1527122018.908 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T00:33:38.908Z,1527122018.908 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:33:38.914Z,1527122018.914 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:33:38.914Z,1527122018.914 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T00:33:38.914Z,1527122018.914 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:33:38.934Z,1527122018.934 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:33:38.934Z,1527122018.934 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:33:39.316Z,1527122019.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:33:39.316Z,1527122019.316 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T00:33:39.316Z,1527122019.316 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:33:39.316Z,1527122019.316 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T00:33:39.704Z,1527122019.704 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:33:39.705Z,1527122019.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:33:39.705Z,1527122019.705 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:33:39.706Z,1527122019.706 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:33:39.706Z,1527122019.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:33:39.706Z,1527122019.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:34:15.713Z,1527122055.713 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T00:34:15.713Z,1527122055.713 [Default:CheckIn:C.Wait] Stopped
2018-05-24T00:34:15.714Z,1527122055.714 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T00:34:15.714Z,1527122055.714 [Default:CheckIn:D] Running Loop=1
2018-05-24T00:34:16.107Z,1527122056.107 [Default:CheckIn:D] Stopped
2018-05-24T00:34:16.107Z,1527122056.107 [Default:CheckIn:E] Running Loop=1
2018-05-24T00:34:16.519Z,1527122056.519 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 42.632817 min 
2018-05-24T00:34:16.519Z,1527122056.519 [Default:CheckIn:E] Stopped
2018-05-24T00:34:16.519Z,1527122056.519 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T00:34:16.519Z,1527122056.519 [Default:CheckIn] Stopped
2018-05-24T00:34:16.519Z,1527122056.519 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T00:34:16.520Z,1527122056.520 [Default:CheckIn](INFO): Running loop #5
2018-05-24T00:34:16.520Z,1527122056.520 [Default:CheckIn] Running Loop=5
2018-05-24T00:34:16.520Z,1527122056.520 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T00:34:16.520Z,1527122056.520 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T00:36:40.034Z,1527122200.034 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:36:40.034Z,1527122200.034 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T00:36:40.034Z,1527122200.034 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:36:40.036Z,1527122200.036 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:36:40.036Z,1527122200.036 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T00:36:40.036Z,1527122200.036 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:36:40.048Z,1527122200.048 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:36:40.057Z,1527122200.057 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:36:40.447Z,1527122200.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:36:40.447Z,1527122200.447 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T00:36:40.448Z,1527122200.448 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:36:40.448Z,1527122200.448 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T00:36:40.838Z,1527122200.838 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:36:40.839Z,1527122200.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:36:40.839Z,1527122200.839 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:36:40.839Z,1527122200.839 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:36:40.840Z,1527122200.840 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:36:40.840Z,1527122200.840 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:38:22.023Z,1527122302.023 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T00:39:16.799Z,1527122356.799 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T00:34:16.5Z
2018-05-24T00:39:16.799Z,1527122356.799 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T00:39:16.799Z,1527122356.799 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T00:39:21.119Z,1527122361.119 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0016.lzma
2018-05-24T00:39:21.918Z,1527122361.918 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0016.lzma.bak
2018-05-24T00:39:21.918Z,1527122361.918 [DataOverHttps](INFO): SBD MOMSN=8291405
2018-05-24T00:39:30.786Z,1527122370.786 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0017.lzma
2018-05-24T00:39:31.558Z,1527122371.558 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0017.lzma.bak
2018-05-24T00:39:31.558Z,1527122371.558 [DataOverHttps](INFO): SBD MOMSN=8291407
2018-05-24T00:39:32.432Z,1527122372.432 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T00:39:32.432Z,1527122372.432 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T00:39:32.432Z,1527122372.432 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T00:39:40.901Z,1527122380.901 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:39:40.901Z,1527122380.901 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T00:39:40.901Z,1527122380.901 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:39:40.902Z,1527122380.902 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:39:40.903Z,1527122380.903 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T00:39:40.903Z,1527122380.903 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:39:40.954Z,1527122380.954 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:39:40.954Z,1527122380.954 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:39:41.306Z,1527122381.306 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:39:41.307Z,1527122381.307 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T00:39:41.307Z,1527122381.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:39:41.307Z,1527122381.307 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T00:39:41.785Z,1527122381.785 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:39:41.785Z,1527122381.785 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:39:41.786Z,1527122381.786 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:39:41.786Z,1527122381.786 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:39:41.786Z,1527122381.786 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:39:41.787Z,1527122381.787 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:42:42.010Z,1527122562.010 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:42:42.010Z,1527122562.010 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T00:42:42.010Z,1527122562.010 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:42:42.011Z,1527122562.011 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:42:42.012Z,1527122562.012 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T00:42:42.012Z,1527122562.012 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:42:42.024Z,1527122562.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:42:42.024Z,1527122562.024 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:42:42.423Z,1527122562.423 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:42:42.423Z,1527122562.423 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T00:42:42.423Z,1527122562.423 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:42:42.423Z,1527122562.423 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T00:42:42.820Z,1527122562.820 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:42:42.821Z,1527122562.821 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:42:42.821Z,1527122562.821 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:42:42.822Z,1527122562.822 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:42:42.822Z,1527122562.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:42:42.822Z,1527122562.822 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:44:32.785Z,1527122672.785 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T00:44:32.785Z,1527122672.785 [Default:CheckIn:C.Wait] Stopped
2018-05-24T00:44:32.785Z,1527122672.785 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T00:44:32.785Z,1527122672.785 [Default:CheckIn:D] Running Loop=1
2018-05-24T00:44:33.178Z,1527122673.178 [Default:CheckIn:D] Stopped
2018-05-24T00:44:33.178Z,1527122673.178 [Default:CheckIn:E] Running Loop=1
2018-05-24T00:44:33.589Z,1527122673.589 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.917342 min 
2018-05-24T00:44:33.590Z,1527122673.590 [Default:CheckIn:E] Stopped
2018-05-24T00:44:33.590Z,1527122673.590 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T00:44:33.590Z,1527122673.590 [Default:CheckIn] Stopped
2018-05-24T00:44:33.590Z,1527122673.590 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T00:44:33.590Z,1527122673.590 [Default:CheckIn](INFO): Running loop #6
2018-05-24T00:44:33.590Z,1527122673.590 [Default:CheckIn] Running Loop=6
2018-05-24T00:44:33.590Z,1527122673.590 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T00:44:33.590Z,1527122673.590 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T00:45:43.139Z,1527122743.139 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:45:43.139Z,1527122743.139 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T00:45:43.139Z,1527122743.139 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:45:43.140Z,1527122743.140 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:45:43.141Z,1527122743.141 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T00:45:43.141Z,1527122743.141 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:45:43.152Z,1527122743.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:45:43.152Z,1527122743.152 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:45:43.548Z,1527122743.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T00:45:43.549Z,1527122743.549 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T00:45:43.549Z,1527122743.549 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T00:45:43.549Z,1527122743.549 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T00:45:43.946Z,1527122743.946 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T00:45:43.946Z,1527122743.946 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:45:43.947Z,1527122743.947 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:45:43.947Z,1527122743.947 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T00:45:43.947Z,1527122743.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T00:45:43.948Z,1527122743.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T00:48:22.311Z,1527122902.311 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T00:48:44.260Z,1527122924.260 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:48:44.260Z,1527122924.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T00:48:44.260Z,1527122924.260 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T00:48:44.262Z,1527122924.262 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T00:48:44.263Z,1527122924.263 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T00:48:44.263Z,1527122924.263 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T00:48:44.314Z,1527122924.314 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:48:44.315Z,1527122924.315 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T00:48:44.315Z,1527122924.315 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:48:44.315Z,1527122924.315 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T00:49:33.857Z,1527122973.857 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T00:44:33.6Z
2018-05-24T00:49:33.857Z,1527122973.857 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T00:49:33.857Z,1527122973.857 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T00:49:38.186Z,1527122978.186 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0019.lzma
2018-05-24T00:49:38.986Z,1527122978.986 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0019.lzma.bak
2018-05-24T00:49:38.986Z,1527122978.986 [DataOverHttps](INFO): SBD MOMSN=8291410
2018-05-24T00:49:48.202Z,1527122988.202 [DataOverHttps](INFO): Sending 181 bytes from file Logs/20180523T234807/Express0020.lzma
2018-05-24T00:49:48.982Z,1527122988.982 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0020.lzma.bak
2018-05-24T00:49:48.982Z,1527122988.982 [DataOverHttps](INFO): SBD MOMSN=8291412
2018-05-24T00:49:49.838Z,1527122989.838 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T00:49:49.838Z,1527122989.838 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T00:49:49.838Z,1527122989.838 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T00:54:50.232Z,1527123290.232 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T00:54:50.233Z,1527123290.233 [Default:CheckIn:C.Wait] Stopped
2018-05-24T00:54:50.233Z,1527123290.233 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T00:54:50.233Z,1527123290.233 [Default:CheckIn:D] Running Loop=1
2018-05-24T00:54:50.640Z,1527123290.640 [Default:CheckIn:D] Stopped
2018-05-24T00:54:50.640Z,1527123290.640 [Default:CheckIn:E] Running Loop=1
2018-05-24T00:54:51.040Z,1527123291.040 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 63.208378 min 
2018-05-24T00:54:51.040Z,1527123291.040 [Default:CheckIn:E] Stopped
2018-05-24T00:54:51.040Z,1527123291.040 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T00:54:51.041Z,1527123291.041 [Default:CheckIn] Stopped
2018-05-24T00:54:51.041Z,1527123291.041 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T00:54:51.041Z,1527123291.041 [Default:CheckIn](INFO): Running loop #7
2018-05-24T00:54:51.041Z,1527123291.041 [Default:CheckIn] Running Loop=7
2018-05-24T00:54:51.041Z,1527123291.041 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T00:54:51.041Z,1527123291.041 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T00:58:22.618Z,1527123502.618 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T00:59:51.367Z,1527123591.367 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T00:54:51.0Z
2018-05-24T00:59:51.367Z,1527123591.367 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T00:59:51.367Z,1527123591.367 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T00:59:55.718Z,1527123595.718 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0022.lzma
2018-05-24T00:59:56.490Z,1527123596.490 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0022.lzma.bak
2018-05-24T00:59:56.491Z,1527123596.491 [DataOverHttps](INFO): SBD MOMSN=8291417
2018-05-24T01:00:05.342Z,1527123605.342 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0023.lzma
2018-05-24T01:00:06.114Z,1527123606.114 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0023.lzma.bak
2018-05-24T01:00:06.114Z,1527123606.114 [DataOverHttps](INFO): SBD MOMSN=8291419
2018-05-24T01:00:06.986Z,1527123606.986 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T01:00:06.986Z,1527123606.986 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T01:00:06.986Z,1527123606.986 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T01:03:44.533Z,1527123824.533 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:03:44.534Z,1527123824.534 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T01:03:44.534Z,1527123824.534 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:03:44.534Z,1527123824.534 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T01:03:44.920Z,1527123824.920 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:03:44.921Z,1527123824.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:03:44.921Z,1527123824.921 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:03:44.922Z,1527123824.922 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:03:44.922Z,1527123824.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:03:44.922Z,1527123824.922 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:05:07.294Z,1527123907.294 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T01:05:07.294Z,1527123907.294 [Default:CheckIn:C.Wait] Stopped
2018-05-24T01:05:07.294Z,1527123907.294 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T01:05:07.294Z,1527123907.294 [Default:CheckIn:D] Running Loop=1
2018-05-24T01:05:07.701Z,1527123907.701 [Default:CheckIn:D] Stopped
2018-05-24T01:05:07.702Z,1527123907.702 [Default:CheckIn:E] Running Loop=1
2018-05-24T01:05:08.095Z,1527123908.095 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 73.492733 min 
2018-05-24T01:05:08.095Z,1527123908.095 [Default:CheckIn:E] Stopped
2018-05-24T01:05:08.095Z,1527123908.095 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T01:05:08.095Z,1527123908.095 [Default:CheckIn] Stopped
2018-05-24T01:05:08.095Z,1527123908.095 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T01:05:08.095Z,1527123908.095 [Default:CheckIn](INFO): Running loop #8
2018-05-24T01:05:08.095Z,1527123908.095 [Default:CheckIn] Running Loop=8
2018-05-24T01:05:08.096Z,1527123908.096 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T01:05:08.096Z,1527123908.096 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T01:06:45.276Z,1527124005.276 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:06:45.277Z,1527124005.277 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T01:06:45.277Z,1527124005.277 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:06:45.279Z,1527124005.279 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:06:45.279Z,1527124005.279 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T01:06:45.279Z,1527124005.279 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:06:45.290Z,1527124005.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:06:45.291Z,1527124005.291 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:06:45.686Z,1527124005.686 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:06:45.686Z,1527124005.686 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T01:06:45.686Z,1527124005.686 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:06:45.686Z,1527124005.686 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T01:06:46.068Z,1527124006.068 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:06:46.068Z,1527124006.068 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:06:46.069Z,1527124006.069 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:06:46.069Z,1527124006.069 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:06:46.070Z,1527124006.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:06:46.070Z,1527124006.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:08:22.878Z,1527124102.878 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T01:09:46.416Z,1527124186.416 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:09:46.416Z,1527124186.416 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T01:09:46.416Z,1527124186.416 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:09:46.418Z,1527124186.418 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:09:46.418Z,1527124186.418 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T01:09:46.418Z,1527124186.418 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:09:46.460Z,1527124186.460 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:09:46.461Z,1527124186.461 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:09:46.826Z,1527124186.826 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:09:46.826Z,1527124186.826 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T01:09:46.826Z,1527124186.826 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:09:46.826Z,1527124186.826 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T01:09:47.210Z,1527124187.210 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:09:47.211Z,1527124187.211 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:09:47.211Z,1527124187.211 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:09:47.212Z,1527124187.212 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:09:47.212Z,1527124187.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:09:47.212Z,1527124187.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:10:08.414Z,1527124208.414 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T01:05:08.1Z
2018-05-24T01:10:08.414Z,1527124208.414 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T01:10:08.414Z,1527124208.414 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T01:10:12.743Z,1527124212.743 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0025.lzma
2018-05-24T01:10:13.542Z,1527124213.542 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0025.lzma.bak
2018-05-24T01:10:13.542Z,1527124213.542 [DataOverHttps](INFO): SBD MOMSN=8291422
2018-05-24T01:10:22.520Z,1527124222.520 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180523T234807/Express0026.lzma
2018-05-24T01:10:23.318Z,1527124223.318 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0026.lzma.bak
2018-05-24T01:10:23.318Z,1527124223.318 [DataOverHttps](INFO): SBD MOMSN=8291424
2018-05-24T01:10:24.167Z,1527124224.167 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T01:10:24.167Z,1527124224.167 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T01:10:24.167Z,1527124224.167 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T01:12:47.410Z,1527124367.410 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:12:47.410Z,1527124367.410 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T01:12:47.410Z,1527124367.410 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:12:47.412Z,1527124367.412 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:12:47.412Z,1527124367.412 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T01:12:47.412Z,1527124367.412 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:12:47.424Z,1527124367.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:12:47.424Z,1527124367.424 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:12:47.828Z,1527124367.828 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:12:47.828Z,1527124367.828 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T01:12:47.828Z,1527124367.828 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:12:47.828Z,1527124367.828 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T01:12:48.212Z,1527124368.212 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:12:48.212Z,1527124368.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:12:48.213Z,1527124368.213 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:12:48.213Z,1527124368.213 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:12:48.213Z,1527124368.213 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:12:48.214Z,1527124368.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:15:24.553Z,1527124524.553 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T01:15:24.554Z,1527124524.554 [Default:CheckIn:C.Wait] Stopped
2018-05-24T01:15:24.554Z,1527124524.554 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T01:15:24.554Z,1527124524.554 [Default:CheckIn:D] Running Loop=1
2018-05-24T01:15:24.951Z,1527124524.951 [Default:CheckIn:D] Stopped
2018-05-24T01:15:24.951Z,1527124524.951 [Default:CheckIn:E] Running Loop=1
2018-05-24T01:15:25.351Z,1527124525.351 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 83.780225 min 
2018-05-24T01:15:25.351Z,1527124525.351 [Default:CheckIn:E] Stopped
2018-05-24T01:15:25.351Z,1527124525.351 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T01:15:25.351Z,1527124525.351 [Default:CheckIn] Stopped
2018-05-24T01:15:25.351Z,1527124525.351 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T01:15:25.352Z,1527124525.352 [Default:CheckIn](INFO): Running loop #9
2018-05-24T01:15:25.352Z,1527124525.352 [Default:CheckIn] Running Loop=9
2018-05-24T01:15:25.352Z,1527124525.352 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T01:15:25.352Z,1527124525.352 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T01:15:48.527Z,1527124548.527 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:15:48.527Z,1527124548.527 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T01:15:48.527Z,1527124548.527 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:15:48.533Z,1527124548.533 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:15:48.533Z,1527124548.533 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T01:15:48.533Z,1527124548.533 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:15:48.557Z,1527124548.557 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:15:48.558Z,1527124548.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:15:48.946Z,1527124548.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:15:48.946Z,1527124548.946 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T01:15:48.947Z,1527124548.947 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:15:48.947Z,1527124548.947 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T01:15:49.306Z,1527124549.306 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:15:49.307Z,1527124549.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:15:49.307Z,1527124549.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:15:49.308Z,1527124549.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:15:49.308Z,1527124549.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:15:49.308Z,1527124549.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:18:23.291Z,1527124703.291 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T01:18:49.636Z,1527124729.636 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:18:49.636Z,1527124729.636 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T01:18:49.636Z,1527124729.636 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:18:49.638Z,1527124729.638 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:18:49.638Z,1527124729.638 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T01:18:49.638Z,1527124729.638 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:18:49.670Z,1527124729.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:18:49.671Z,1527124729.671 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:18:50.042Z,1527124730.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:18:50.042Z,1527124730.042 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T01:18:50.043Z,1527124730.043 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:18:50.043Z,1527124730.043 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T01:18:50.435Z,1527124730.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:18:50.435Z,1527124730.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:18:50.436Z,1527124730.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:18:50.436Z,1527124730.436 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:18:50.436Z,1527124730.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:18:50.437Z,1527124730.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:20:25.615Z,1527124825.615 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T01:15:25.4Z
2018-05-24T01:20:25.616Z,1527124825.616 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T01:20:25.616Z,1527124825.616 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T01:20:29.965Z,1527124829.965 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0028.lzma
2018-05-24T01:20:30.770Z,1527124830.770 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0028.lzma.bak
2018-05-24T01:20:30.771Z,1527124830.771 [DataOverHttps](INFO): SBD MOMSN=8291427
2018-05-24T01:20:39.638Z,1527124839.638 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0029.lzma
2018-05-24T01:20:40.438Z,1527124840.438 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0029.lzma.bak
2018-05-24T01:20:40.438Z,1527124840.438 [DataOverHttps](INFO): SBD MOMSN=8291429
2018-05-24T01:20:41.293Z,1527124841.293 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T01:20:41.293Z,1527124841.293 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T01:20:41.293Z,1527124841.293 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T01:21:50.535Z,1527124910.535 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:21:50.535Z,1527124910.535 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T01:21:50.535Z,1527124910.535 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:21:50.537Z,1527124910.537 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:21:50.537Z,1527124910.537 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T01:21:50.537Z,1527124910.537 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:21:50.548Z,1527124910.548 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:21:50.580Z,1527124910.580 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:21:50.948Z,1527124910.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:21:50.948Z,1527124910.948 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T01:21:50.949Z,1527124910.949 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:21:50.949Z,1527124910.949 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T01:21:51.336Z,1527124911.336 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:21:51.336Z,1527124911.336 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:21:51.337Z,1527124911.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:21:51.337Z,1527124911.337 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:21:51.338Z,1527124911.338 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:21:51.338Z,1527124911.338 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:24:51.643Z,1527125091.643 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:24:51.644Z,1527125091.644 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T01:24:51.644Z,1527125091.644 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:24:51.645Z,1527125091.645 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:24:51.646Z,1527125091.646 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T01:24:51.646Z,1527125091.646 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:24:51.692Z,1527125091.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:24:51.692Z,1527125091.692 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:24:52.054Z,1527125092.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:24:52.054Z,1527125092.054 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T01:24:52.054Z,1527125092.054 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:24:52.054Z,1527125092.054 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T01:24:52.444Z,1527125092.444 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:24:52.444Z,1527125092.444 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:24:52.445Z,1527125092.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:24:52.445Z,1527125092.445 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:24:52.446Z,1527125092.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:24:52.446Z,1527125092.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:25:41.649Z,1527125141.649 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T01:25:41.649Z,1527125141.649 [Default:CheckIn:C.Wait] Stopped
2018-05-24T01:25:41.650Z,1527125141.650 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T01:25:41.650Z,1527125141.650 [Default:CheckIn:D] Running Loop=1
2018-05-24T01:25:42.046Z,1527125142.046 [Default:CheckIn:D] Stopped
2018-05-24T01:25:42.046Z,1527125142.046 [Default:CheckIn:E] Running Loop=1
2018-05-24T01:25:42.452Z,1527125142.452 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 94.065145 min 
2018-05-24T01:25:42.452Z,1527125142.452 [Default:CheckIn:E] Stopped
2018-05-24T01:25:42.452Z,1527125142.452 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T01:25:42.452Z,1527125142.452 [Default:CheckIn] Stopped
2018-05-24T01:25:42.453Z,1527125142.453 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T01:25:42.453Z,1527125142.453 [Default:CheckIn](INFO): Running loop #10
2018-05-24T01:25:42.453Z,1527125142.453 [Default:CheckIn] Running Loop=10
2018-05-24T01:25:42.453Z,1527125142.453 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T01:25:42.453Z,1527125142.453 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T01:27:52.802Z,1527125272.802 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:27:52.802Z,1527125272.802 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T01:27:52.802Z,1527125272.802 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:27:52.804Z,1527125272.804 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:27:52.804Z,1527125272.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T01:27:52.804Z,1527125272.804 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:27:52.815Z,1527125272.815 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:27:52.816Z,1527125272.816 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:27:53.213Z,1527125273.213 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:27:53.213Z,1527125273.213 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T01:27:53.214Z,1527125273.214 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:27:53.214Z,1527125273.214 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T01:27:53.607Z,1527125273.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:27:53.607Z,1527125273.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:27:53.607Z,1527125273.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:27:53.608Z,1527125273.608 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:27:53.608Z,1527125273.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:27:53.608Z,1527125273.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:28:23.639Z,1527125303.639 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T01:28:49.586Z,1527125329.586 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.382672 seconds old.
2018-05-24T01:28:49.587Z,1527125329.587 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.383113 seconds old.
2018-05-24T01:28:49.991Z,1527125329.991 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.787464 seconds old.
2018-05-24T01:28:49.992Z,1527125329.992 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.787877 seconds old.
2018-05-24T01:28:50.392Z,1527125330.392 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.188679 seconds old.
2018-05-24T01:28:50.393Z,1527125330.393 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.189313 seconds old.
2018-05-24T01:28:50.791Z,1527125330.791 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.587451 seconds old.
2018-05-24T01:28:50.792Z,1527125330.792 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.587860 seconds old.
2018-05-24T01:30:42.755Z,1527125442.755 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T01:25:42.5Z
2018-05-24T01:30:42.755Z,1527125442.755 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T01:30:42.755Z,1527125442.755 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T01:30:47.115Z,1527125447.115 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0031.lzma
2018-05-24T01:30:47.914Z,1527125447.914 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0031.lzma.bak
2018-05-24T01:30:47.914Z,1527125447.914 [DataOverHttps](INFO): SBD MOMSN=8291432
2018-05-24T01:30:53.647Z,1527125453.647 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:30:53.647Z,1527125453.647 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T01:30:53.647Z,1527125453.647 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:30:53.648Z,1527125453.648 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:30:53.649Z,1527125453.649 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T01:30:53.649Z,1527125453.649 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:30:53.675Z,1527125453.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:30:53.675Z,1527125453.675 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:30:56.743Z,1527125456.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:30:56.743Z,1527125456.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T01:30:56.743Z,1527125456.743 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:30:56.743Z,1527125456.743 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T01:30:56.755Z,1527125456.755 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0032.lzma
2018-05-24T01:30:56.851Z,1527125456.851 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:30:56.852Z,1527125456.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:30:56.852Z,1527125456.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:30:56.853Z,1527125456.853 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:30:56.853Z,1527125456.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:30:56.853Z,1527125456.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:30:57.554Z,1527125457.554 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0032.lzma.bak
2018-05-24T01:30:57.554Z,1527125457.554 [DataOverHttps](INFO): SBD MOMSN=8291434
2018-05-24T01:30:58.411Z,1527125458.411 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T01:30:58.411Z,1527125458.411 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T01:30:58.411Z,1527125458.411 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T01:33:56.870Z,1527125636.870 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:33:56.870Z,1527125636.870 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T01:33:56.870Z,1527125636.870 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:33:56.872Z,1527125636.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:33:56.872Z,1527125636.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T01:33:56.872Z,1527125636.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:33:56.914Z,1527125636.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:33:56.915Z,1527125636.915 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:33:57.281Z,1527125637.281 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:33:57.281Z,1527125637.281 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T01:33:57.282Z,1527125637.282 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:33:57.282Z,1527125637.282 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T01:33:57.668Z,1527125637.668 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:33:57.669Z,1527125637.669 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:33:57.669Z,1527125637.669 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:33:57.670Z,1527125637.670 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:33:57.670Z,1527125637.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:33:57.670Z,1527125637.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:35:58.876Z,1527125758.876 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T01:35:58.876Z,1527125758.876 [Default:CheckIn:C.Wait] Stopped
2018-05-24T01:35:58.876Z,1527125758.876 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T01:35:58.876Z,1527125758.876 [Default:CheckIn:D] Running Loop=1
2018-05-24T01:35:59.231Z,1527125759.231 [Default:CheckIn:D] Stopped
2018-05-24T01:35:59.231Z,1527125759.231 [Default:CheckIn:E] Running Loop=1
2018-05-24T01:35:59.633Z,1527125759.633 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 104.351562 min 
2018-05-24T01:35:59.633Z,1527125759.633 [Default:CheckIn:E] Stopped
2018-05-24T01:35:59.633Z,1527125759.633 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T01:35:59.633Z,1527125759.633 [Default:CheckIn] Stopped
2018-05-24T01:35:59.633Z,1527125759.633 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T01:35:59.634Z,1527125759.634 [Default:CheckIn](INFO): Running loop #11
2018-05-24T01:35:59.634Z,1527125759.634 [Default:CheckIn] Running Loop=11
2018-05-24T01:35:59.634Z,1527125759.634 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T01:35:59.634Z,1527125759.634 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T01:36:58.072Z,1527125818.072 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:36:58.072Z,1527125818.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T01:36:58.072Z,1527125818.072 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:36:58.074Z,1527125818.074 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:36:58.074Z,1527125818.074 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T01:36:58.074Z,1527125818.074 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:36:58.107Z,1527125818.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:36:58.107Z,1527125818.107 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:36:58.482Z,1527125818.482 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:36:58.482Z,1527125818.482 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T01:36:58.482Z,1527125818.482 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:36:58.482Z,1527125818.482 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T01:36:58.875Z,1527125818.875 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:36:58.875Z,1527125818.875 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:36:58.876Z,1527125818.876 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:36:58.876Z,1527125818.876 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:36:58.876Z,1527125818.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:36:58.877Z,1527125818.877 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:38:23.690Z,1527125903.690 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T01:39:59.236Z,1527125999.236 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:39:59.236Z,1527125999.236 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T01:39:59.236Z,1527125999.236 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:39:59.238Z,1527125999.238 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:39:59.238Z,1527125999.238 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T01:39:59.238Z,1527125999.238 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:39:59.264Z,1527125999.264 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:39:59.265Z,1527125999.265 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:39:59.629Z,1527125999.629 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:39:59.629Z,1527125999.629 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T01:39:59.629Z,1527125999.629 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:39:59.629Z,1527125999.629 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T01:40:00.021Z,1527126000.021 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:40:00.022Z,1527126000.022 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:40:00.022Z,1527126000.022 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:40:00.023Z,1527126000.023 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:40:00.023Z,1527126000.023 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:40:00.023Z,1527126000.023 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:40:59.998Z,1527126059.998 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T01:35:59.6Z
2018-05-24T01:40:59.998Z,1527126059.998 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T01:40:59.998Z,1527126059.998 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T01:41:04.347Z,1527126064.347 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0034.lzma
2018-05-24T01:41:05.114Z,1527126065.114 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0034.lzma.bak
2018-05-24T01:41:05.114Z,1527126065.114 [DataOverHttps](INFO): SBD MOMSN=8291437
2018-05-24T01:41:13.996Z,1527126073.996 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0035.lzma
2018-05-24T01:41:14.794Z,1527126074.794 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0035.lzma.bak
2018-05-24T01:41:14.794Z,1527126074.794 [DataOverHttps](INFO): SBD MOMSN=8291439
2018-05-24T01:41:15.648Z,1527126075.648 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T01:41:15.649Z,1527126075.649 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T01:41:15.649Z,1527126075.649 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T01:43:00.081Z,1527126180.081 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:43:00.081Z,1527126180.081 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T01:43:00.081Z,1527126180.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:43:00.083Z,1527126180.083 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:43:00.083Z,1527126180.083 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T01:43:00.083Z,1527126180.083 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:43:00.107Z,1527126180.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:43:00.107Z,1527126180.107 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:43:00.511Z,1527126180.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:43:00.511Z,1527126180.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T01:43:00.511Z,1527126180.511 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:43:00.511Z,1527126180.511 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T01:43:00.879Z,1527126180.879 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:43:00.879Z,1527126180.879 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:43:00.880Z,1527126180.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:43:00.880Z,1527126180.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:43:00.880Z,1527126180.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:43:00.914Z,1527126180.914 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:46:01.218Z,1527126361.218 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:46:01.218Z,1527126361.218 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T01:46:01.218Z,1527126361.218 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:46:01.220Z,1527126361.220 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:46:01.220Z,1527126361.220 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T01:46:01.220Z,1527126361.220 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:46:01.273Z,1527126361.273 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:46:01.273Z,1527126361.273 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:46:01.606Z,1527126361.606 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:46:01.606Z,1527126361.606 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T01:46:01.607Z,1527126361.607 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:46:01.607Z,1527126361.607 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T01:46:01.979Z,1527126361.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:46:01.979Z,1527126361.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:46:01.980Z,1527126361.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:46:01.980Z,1527126361.980 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:46:02.021Z,1527126362.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:46:02.021Z,1527126362.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:46:15.999Z,1527126375.999 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T01:46:15.999Z,1527126375.999 [Default:CheckIn:C.Wait] Stopped
2018-05-24T01:46:15.999Z,1527126375.999 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T01:46:15.000Z,1527126376.000 [Default:CheckIn:D] Running Loop=1
2018-05-24T01:46:16.385Z,1527126376.385 [Default:CheckIn:D] Stopped
2018-05-24T01:46:16.385Z,1527126376.385 [Default:CheckIn:E] Running Loop=1
2018-05-24T01:46:16.786Z,1527126376.786 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 114.637459 min 
2018-05-24T01:46:16.786Z,1527126376.786 [Default:CheckIn:E] Stopped
2018-05-24T01:46:16.786Z,1527126376.786 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T01:46:16.786Z,1527126376.786 [Default:CheckIn] Stopped
2018-05-24T01:46:16.787Z,1527126376.787 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T01:46:16.787Z,1527126376.787 [Default:CheckIn](INFO): Running loop #12
2018-05-24T01:46:16.787Z,1527126376.787 [Default:CheckIn] Running Loop=12
2018-05-24T01:46:16.787Z,1527126376.787 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T01:46:16.787Z,1527126376.787 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T01:48:23.933Z,1527126503.933 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T01:49:02.308Z,1527126542.308 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:49:02.310Z,1527126542.310 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T01:49:02.310Z,1527126542.310 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:49:02.311Z,1527126542.311 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:49:02.311Z,1527126542.311 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T01:49:02.312Z,1527126542.312 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:49:02.344Z,1527126542.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:49:02.344Z,1527126542.344 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:49:02.719Z,1527126542.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:49:02.719Z,1527126542.719 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T01:49:02.720Z,1527126542.720 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:49:02.720Z,1527126542.720 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T01:49:03.106Z,1527126543.106 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:49:03.106Z,1527126543.106 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:49:03.106Z,1527126543.106 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:49:03.107Z,1527126543.107 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:49:03.107Z,1527126543.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:49:03.107Z,1527126543.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:51:17.058Z,1527126677.058 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T01:46:16.8Z
2018-05-24T01:51:17.058Z,1527126677.058 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T01:51:17.058Z,1527126677.058 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T01:51:21.463Z,1527126681.463 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0037.lzma
2018-05-24T01:51:22.262Z,1527126682.262 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0037.lzma.bak
2018-05-24T01:51:22.262Z,1527126682.262 [DataOverHttps](INFO): SBD MOMSN=8291442
2018-05-24T01:51:31.127Z,1527126691.127 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0038.lzma
2018-05-24T01:51:32.140Z,1527126692.140 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0038.lzma.bak
2018-05-24T01:51:32.140Z,1527126692.140 [DataOverHttps](INFO): SBD MOMSN=8291444
2018-05-24T01:51:32.806Z,1527126692.806 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T01:51:32.806Z,1527126692.806 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T01:51:32.806Z,1527126692.806 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T01:52:03.339Z,1527126723.339 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:52:03.340Z,1527126723.340 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T01:52:03.340Z,1527126723.340 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:52:03.342Z,1527126723.342 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:52:03.342Z,1527126723.342 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T01:52:03.342Z,1527126723.342 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:52:03.353Z,1527126723.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:52:03.354Z,1527126723.354 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:52:03.752Z,1527126723.752 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:52:03.752Z,1527126723.752 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T01:52:03.753Z,1527126723.753 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:52:03.753Z,1527126723.753 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T01:52:04.144Z,1527126724.144 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:52:04.144Z,1527126724.144 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:52:04.145Z,1527126724.145 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:52:04.145Z,1527126724.145 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:52:04.146Z,1527126724.146 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:52:04.146Z,1527126724.146 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:55:04.475Z,1527126904.475 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:55:04.475Z,1527126904.475 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T01:55:04.475Z,1527126904.475 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:55:04.477Z,1527126904.477 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:55:04.477Z,1527126904.477 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T01:55:04.477Z,1527126904.477 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:55:04.489Z,1527126904.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:55:04.490Z,1527126904.490 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:55:04.887Z,1527126904.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:55:04.887Z,1527126904.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T01:55:04.887Z,1527126904.887 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:55:04.887Z,1527126904.887 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T01:55:05.279Z,1527126905.279 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:55:05.280Z,1527126905.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:55:05.280Z,1527126905.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:55:05.280Z,1527126905.280 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:55:05.281Z,1527126905.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:55:05.281Z,1527126905.281 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:56:33.239Z,1527126993.239 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T01:56:33.239Z,1527126993.239 [Default:CheckIn:C.Wait] Stopped
2018-05-24T01:56:33.239Z,1527126993.239 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T01:56:33.239Z,1527126993.239 [Default:CheckIn:D] Running Loop=1
2018-05-24T01:56:33.646Z,1527126993.646 [Default:CheckIn:D] Stopped
2018-05-24T01:56:33.646Z,1527126993.646 [Default:CheckIn:E] Running Loop=1
2018-05-24T01:56:34.046Z,1527126994.046 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.925146 min 
2018-05-24T01:56:34.046Z,1527126994.046 [Default:CheckIn:E] Stopped
2018-05-24T01:56:34.046Z,1527126994.046 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T01:56:34.047Z,1527126994.047 [Default:CheckIn] Stopped
2018-05-24T01:56:34.047Z,1527126994.047 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T01:56:34.047Z,1527126994.047 [Default:CheckIn](INFO): Running loop #13
2018-05-24T01:56:34.047Z,1527126994.047 [Default:CheckIn] Running Loop=13
2018-05-24T01:56:34.047Z,1527126994.047 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T01:56:34.047Z,1527126994.047 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T01:58:05.644Z,1527127085.644 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:58:05.644Z,1527127085.644 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T01:58:05.644Z,1527127085.644 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T01:58:05.646Z,1527127085.646 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T01:58:05.646Z,1527127085.646 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T01:58:05.646Z,1527127085.646 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T01:58:05.657Z,1527127085.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T01:58:05.658Z,1527127085.658 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T01:58:06.054Z,1527127086.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T01:58:06.054Z,1527127086.054 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T01:58:06.055Z,1527127086.055 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T01:58:06.055Z,1527127086.055 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T01:58:06.444Z,1527127086.444 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T01:58:06.445Z,1527127086.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:58:06.445Z,1527127086.445 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:58:06.446Z,1527127086.446 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T01:58:06.446Z,1527127086.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T01:58:06.446Z,1527127086.446 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T01:58:24.050Z,1527127104.050 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T02:01:06.760Z,1527127266.760 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:01:06.760Z,1527127266.760 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T02:01:06.760Z,1527127266.760 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:01:06.762Z,1527127266.762 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:01:06.763Z,1527127266.763 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T02:01:06.763Z,1527127266.763 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:01:06.811Z,1527127266.811 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:01:06.811Z,1527127266.811 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:01:07.177Z,1527127267.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:01:07.177Z,1527127267.177 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T02:01:07.177Z,1527127267.177 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:01:07.178Z,1527127267.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T02:01:07.554Z,1527127267.554 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:01:07.555Z,1527127267.555 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:01:07.555Z,1527127267.555 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:01:07.555Z,1527127267.555 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:01:07.556Z,1527127267.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:01:07.556Z,1527127267.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:01:34.350Z,1527127294.350 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T01:56:34.0Z
2018-05-24T02:01:34.350Z,1527127294.350 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T02:01:34.350Z,1527127294.350 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T02:01:38.780Z,1527127298.780 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0040.lzma
2018-05-24T02:01:39.578Z,1527127299.578 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0040.lzma.bak
2018-05-24T02:01:39.578Z,1527127299.578 [DataOverHttps](INFO): SBD MOMSN=8291447
2018-05-24T02:01:48.437Z,1527127308.437 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0041.lzma
2018-05-24T02:01:49.230Z,1527127309.230 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0041.lzma.bak
2018-05-24T02:01:49.230Z,1527127309.230 [DataOverHttps](INFO): SBD MOMSN=8291449
2018-05-24T02:01:50.083Z,1527127310.083 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T02:01:50.083Z,1527127310.083 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T02:01:50.084Z,1527127310.084 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T02:04:07.686Z,1527127447.686 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:04:07.686Z,1527127447.686 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T02:04:07.686Z,1527127447.686 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:04:07.688Z,1527127447.688 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:04:07.688Z,1527127447.688 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T02:04:07.688Z,1527127447.688 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:04:07.724Z,1527127447.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:04:07.724Z,1527127447.724 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:04:07.730Z,1527127447.730 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:04:07.730Z,1527127447.730 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:06:50.445Z,1527127610.445 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T02:06:50.445Z,1527127610.445 [Default:CheckIn:C.Wait] Stopped
2018-05-24T02:06:50.445Z,1527127610.445 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T02:06:50.445Z,1527127610.445 [Default:CheckIn:D] Running Loop=1
2018-05-24T02:06:50.842Z,1527127610.842 [Default:CheckIn:D] Stopped
2018-05-24T02:06:50.842Z,1527127610.842 [Default:CheckIn:E] Running Loop=1
2018-05-24T02:06:51.241Z,1527127611.241 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 135.211735 min 
2018-05-24T02:06:51.242Z,1527127611.242 [Default:CheckIn:E] Stopped
2018-05-24T02:06:51.242Z,1527127611.242 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T02:06:51.242Z,1527127611.242 [Default:CheckIn] Stopped
2018-05-24T02:06:51.242Z,1527127611.242 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T02:06:51.242Z,1527127611.242 [Default:CheckIn](INFO): Running loop #14
2018-05-24T02:06:51.242Z,1527127611.242 [Default:CheckIn] Running Loop=14
2018-05-24T02:06:51.242Z,1527127611.242 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T02:06:51.243Z,1527127611.243 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T02:08:24.379Z,1527127704.379 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T02:11:51.480Z,1527127911.480 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T02:06:51.2Z
2018-05-24T02:11:51.480Z,1527127911.480 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T02:11:51.480Z,1527127911.480 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T02:11:55.790Z,1527127915.790 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0043.lzma
2018-05-24T02:11:56.590Z,1527127916.590 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0043.lzma.bak
2018-05-24T02:11:56.590Z,1527127916.590 [DataOverHttps](INFO): SBD MOMSN=8291452
2018-05-24T02:12:05.422Z,1527127925.422 [DataOverHttps](INFO): Sending 182 bytes from file Logs/20180523T234807/Express0044.lzma
2018-05-24T02:12:06.190Z,1527127926.190 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0044.lzma.bak
2018-05-24T02:12:06.190Z,1527127926.190 [DataOverHttps](INFO): SBD MOMSN=8291454
2018-05-24T02:12:07.069Z,1527127927.069 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T02:12:07.069Z,1527127927.069 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T02:12:07.069Z,1527127927.069 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T02:17:07.180Z,1527128227.180 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T02:17:07.180Z,1527128227.180 [Default:CheckIn:C.Wait] Stopped
2018-05-24T02:17:07.180Z,1527128227.180 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T02:17:07.180Z,1527128227.180 [Default:CheckIn:D] Running Loop=1
2018-05-24T02:17:07.564Z,1527128227.564 [Default:CheckIn:D] Stopped
2018-05-24T02:17:07.564Z,1527128227.564 [Default:CheckIn:E] Running Loop=1
2018-05-24T02:17:07.966Z,1527128227.966 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 145.490446 min 
2018-05-24T02:17:07.967Z,1527128227.967 [Default:CheckIn:E] Stopped
2018-05-24T02:17:07.967Z,1527128227.967 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T02:17:07.967Z,1527128227.967 [Default:CheckIn] Stopped
2018-05-24T02:17:07.967Z,1527128227.967 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T02:17:07.967Z,1527128227.967 [Default:CheckIn](INFO): Running loop #15
2018-05-24T02:17:07.967Z,1527128227.967 [Default:CheckIn] Running Loop=15
2018-05-24T02:17:07.967Z,1527128227.967 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T02:17:07.968Z,1527128227.968 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T02:18:24.731Z,1527128304.731 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T02:19:07.954Z,1527128347.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:19:07.954Z,1527128347.954 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T02:19:07.955Z,1527128347.955 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:19:07.955Z,1527128347.955 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T02:19:08.303Z,1527128348.303 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:19:08.303Z,1527128348.303 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:19:08.304Z,1527128348.304 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:19:08.304Z,1527128348.304 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:19:08.304Z,1527128348.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:19:08.305Z,1527128348.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:22:08.243Z,1527128528.243 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T02:17:07.0Z
2018-05-24T02:22:08.243Z,1527128528.243 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T02:22:08.243Z,1527128528.243 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T02:22:08.634Z,1527128528.634 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:22:08.635Z,1527128528.635 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T02:22:08.635Z,1527128528.635 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:22:08.636Z,1527128528.636 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:22:08.636Z,1527128528.636 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T02:22:08.636Z,1527128528.636 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:22:08.649Z,1527128528.649 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:22:08.650Z,1527128528.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:22:09.253Z,1527128529.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:22:09.253Z,1527128529.253 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T02:22:09.253Z,1527128529.253 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:22:09.254Z,1527128529.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T02:22:09.452Z,1527128529.452 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:22:09.452Z,1527128529.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:22:09.453Z,1527128529.453 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:22:09.453Z,1527128529.453 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:22:09.454Z,1527128529.454 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:22:09.454Z,1527128529.454 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:22:12.602Z,1527128532.602 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0046.lzma
2018-05-24T02:22:13.402Z,1527128533.402 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0046.lzma.bak
2018-05-24T02:22:13.402Z,1527128533.402 [DataOverHttps](INFO): SBD MOMSN=8291459
2018-05-24T02:22:22.814Z,1527128542.814 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0047.lzma
2018-05-24T02:22:23.614Z,1527128543.614 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0047.lzma.bak
2018-05-24T02:22:23.614Z,1527128543.614 [DataOverHttps](INFO): SBD MOMSN=8291461
2018-05-24T02:22:24.472Z,1527128544.472 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T02:22:24.472Z,1527128544.472 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T02:22:24.472Z,1527128544.472 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T02:25:09.660Z,1527128709.660 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:25:09.660Z,1527128709.660 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T02:25:09.660Z,1527128709.660 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:25:09.662Z,1527128709.662 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:25:09.662Z,1527128709.662 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T02:25:09.662Z,1527128709.662 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:25:09.712Z,1527128709.712 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:25:09.712Z,1527128709.712 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:25:10.064Z,1527128710.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:25:10.064Z,1527128710.064 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T02:25:10.065Z,1527128710.065 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:25:10.065Z,1527128710.065 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T02:25:10.454Z,1527128710.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:25:10.454Z,1527128710.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:25:10.454Z,1527128710.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:25:10.455Z,1527128710.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:25:10.455Z,1527128710.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:25:10.455Z,1527128710.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:27:24.799Z,1527128844.799 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T02:27:24.799Z,1527128844.799 [Default:CheckIn:C.Wait] Stopped
2018-05-24T02:27:24.799Z,1527128844.799 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T02:27:24.799Z,1527128844.799 [Default:CheckIn:D] Running Loop=1
2018-05-24T02:27:25.202Z,1527128845.202 [Default:CheckIn:D] Stopped
2018-05-24T02:27:25.202Z,1527128845.202 [Default:CheckIn:E] Running Loop=1
2018-05-24T02:27:25.595Z,1527128845.595 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 155.784408 min 
2018-05-24T02:27:25.595Z,1527128845.595 [Default:CheckIn:E] Stopped
2018-05-24T02:27:25.595Z,1527128845.595 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T02:27:25.595Z,1527128845.595 [Default:CheckIn] Stopped
2018-05-24T02:27:25.595Z,1527128845.595 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T02:27:25.595Z,1527128845.595 [Default:CheckIn](INFO): Running loop #16
2018-05-24T02:27:25.596Z,1527128845.596 [Default:CheckIn] Running Loop=16
2018-05-24T02:27:25.596Z,1527128845.596 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T02:27:25.596Z,1527128845.596 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T02:27:37.558Z,1527128857.558 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395269 seconds old.
2018-05-24T02:27:37.560Z,1527128857.560 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395713 seconds old.
2018-05-24T02:27:37.956Z,1527128857.956 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.792339 seconds old.
2018-05-24T02:27:37.957Z,1527128857.957 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.792750 seconds old.
2018-05-24T02:27:38.359Z,1527128858.359 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.196011 seconds old.
2018-05-24T02:27:38.360Z,1527128858.360 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.196413 seconds old.
2018-05-24T02:27:38.757Z,1527128858.757 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.593617 seconds old.
2018-05-24T02:27:38.758Z,1527128858.758 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.594094 seconds old.
2018-05-24T02:27:39.156Z,1527128859.156 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.992933 seconds old.
2018-05-24T02:27:39.157Z,1527128859.157 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.993546 seconds old.
2018-05-24T02:27:39.563Z,1527128859.563 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.399466 seconds old.
2018-05-24T02:27:39.564Z,1527128859.564 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.399876 seconds old.
2018-05-24T02:27:39.959Z,1527128859.959 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.795573 seconds old.
2018-05-24T02:27:39.960Z,1527128859.960 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.795979 seconds old.
2018-05-24T02:27:40.363Z,1527128860.363 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.199739 seconds old.
2018-05-24T02:27:40.364Z,1527128860.364 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.200139 seconds old.
2018-05-24T02:27:40.755Z,1527128860.755 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.591559 seconds old.
2018-05-24T02:27:40.756Z,1527128860.756 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.591959 seconds old.
2018-05-24T02:27:41.156Z,1527128861.156 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.992731 seconds old.
2018-05-24T02:27:41.157Z,1527128861.157 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.993229 seconds old.
2018-05-24T02:27:41.554Z,1527128861.554 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.391039 seconds old.
2018-05-24T02:27:41.555Z,1527128861.555 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.391449 seconds old.
2018-05-24T02:27:41.963Z,1527128861.963 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.799405 seconds old.
2018-05-24T02:27:41.964Z,1527128861.964 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.799816 seconds old.
2018-05-24T02:28:10.772Z,1527128890.772 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:28:10.789Z,1527128890.789 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T02:28:10.789Z,1527128890.789 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:28:10.791Z,1527128890.791 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:28:10.791Z,1527128890.791 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T02:28:10.791Z,1527128890.791 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:28:10.823Z,1527128890.823 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:28:10.824Z,1527128890.824 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:28:11.205Z,1527128891.205 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:28:11.205Z,1527128891.205 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T02:28:11.206Z,1527128891.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:28:11.206Z,1527128891.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T02:28:11.557Z,1527128891.557 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:28:11.557Z,1527128891.557 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:28:11.558Z,1527128891.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:28:11.558Z,1527128891.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:28:11.558Z,1527128891.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:28:11.559Z,1527128891.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:28:24.775Z,1527128904.775 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T02:31:11.868Z,1527129071.868 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:31:11.868Z,1527129071.868 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T02:31:11.868Z,1527129071.868 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:31:11.870Z,1527129071.870 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:31:11.870Z,1527129071.870 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T02:31:11.870Z,1527129071.870 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:31:11.882Z,1527129071.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:31:11.882Z,1527129071.882 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:31:12.287Z,1527129072.287 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:31:12.287Z,1527129072.287 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T02:31:12.288Z,1527129072.288 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:31:12.288Z,1527129072.288 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T02:31:12.670Z,1527129072.670 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:31:12.671Z,1527129072.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:31:12.671Z,1527129072.671 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:31:12.671Z,1527129072.671 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:31:12.672Z,1527129072.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:31:12.672Z,1527129072.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:32:25.864Z,1527129145.864 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T02:27:25.6Z
2018-05-24T02:32:25.864Z,1527129145.864 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T02:32:25.864Z,1527129145.864 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T02:32:30.356Z,1527129150.356 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0049.lzma
2018-05-24T02:32:31.158Z,1527129151.158 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0049.lzma.bak
2018-05-24T02:32:31.158Z,1527129151.158 [DataOverHttps](INFO): SBD MOMSN=8291464
2018-05-24T02:32:40.011Z,1527129160.011 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0050.lzma
2018-05-24T02:32:40.802Z,1527129160.802 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0050.lzma.bak
2018-05-24T02:32:40.802Z,1527129160.802 [DataOverHttps](INFO): SBD MOMSN=8291466
2018-05-24T02:32:41.671Z,1527129161.671 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T02:32:41.672Z,1527129161.672 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T02:32:41.672Z,1527129161.672 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T02:34:12.887Z,1527129252.887 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:34:12.888Z,1527129252.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T02:34:12.888Z,1527129252.888 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:34:12.890Z,1527129252.890 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:34:12.890Z,1527129252.890 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T02:34:12.890Z,1527129252.890 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:34:12.902Z,1527129252.902 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:34:12.903Z,1527129252.903 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:34:13.322Z,1527129253.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:34:13.322Z,1527129253.322 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T02:34:13.323Z,1527129253.323 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:34:13.323Z,1527129253.323 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T02:34:13.695Z,1527129253.695 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:34:13.696Z,1527129253.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:34:13.696Z,1527129253.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:34:13.696Z,1527129253.696 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:34:13.697Z,1527129253.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:34:13.698Z,1527129253.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:37:14.000Z,1527129434.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:37:14.000Z,1527129434.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T02:37:14.000Z,1527129434.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:37:14.002Z,1527129434.002 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:37:14.002Z,1527129434.002 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T02:37:14.002Z,1527129434.002 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:37:14.030Z,1527129434.030 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:37:14.031Z,1527129434.031 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:37:14.408Z,1527129434.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:37:14.409Z,1527129434.409 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T02:37:14.409Z,1527129434.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:37:14.409Z,1527129434.409 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T02:37:14.798Z,1527129434.798 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:37:14.798Z,1527129434.798 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:37:14.799Z,1527129434.799 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:37:14.799Z,1527129434.799 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:37:14.799Z,1527129434.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:37:14.800Z,1527129434.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:37:41.999Z,1527129461.999 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T02:37:41.999Z,1527129461.999 [Default:CheckIn:C.Wait] Stopped
2018-05-24T02:37:41.999Z,1527129461.999 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T02:37:41.999Z,1527129461.999 [Default:CheckIn:D] Running Loop=1
2018-05-24T02:37:42.398Z,1527129462.398 [Default:CheckIn:D] Stopped
2018-05-24T02:37:42.398Z,1527129462.398 [Default:CheckIn:E] Running Loop=1
2018-05-24T02:37:42.799Z,1527129462.799 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 166.071012 min 
2018-05-24T02:37:42.799Z,1527129462.799 [Default:CheckIn:E] Stopped
2018-05-24T02:37:42.799Z,1527129462.799 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T02:37:42.799Z,1527129462.799 [Default:CheckIn] Stopped
2018-05-24T02:37:42.799Z,1527129462.799 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T02:37:42.800Z,1527129462.800 [Default:CheckIn](INFO): Running loop #17
2018-05-24T02:37:42.800Z,1527129462.800 [Default:CheckIn] Running Loop=17
2018-05-24T02:37:42.800Z,1527129462.800 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T02:37:42.800Z,1527129462.800 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T02:38:24.775Z,1527129504.775 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T02:40:15.125Z,1527129615.125 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:40:15.125Z,1527129615.125 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T02:40:15.125Z,1527129615.125 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:40:15.127Z,1527129615.127 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:40:15.127Z,1527129615.127 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T02:40:15.127Z,1527129615.127 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:40:15.139Z,1527129615.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:40:15.139Z,1527129615.139 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:40:15.578Z,1527129615.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:40:15.578Z,1527129615.578 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T02:40:15.578Z,1527129615.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:40:15.578Z,1527129615.578 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T02:40:15.924Z,1527129615.924 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:40:15.925Z,1527129615.925 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:40:15.926Z,1527129615.926 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:40:15.926Z,1527129615.926 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:40:15.927Z,1527129615.927 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:40:15.927Z,1527129615.927 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:42:43.124Z,1527129763.124 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T02:37:42.8Z
2018-05-24T02:42:43.124Z,1527129763.124 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T02:42:43.124Z,1527129763.124 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T02:42:47.439Z,1527129767.439 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0052.lzma
2018-05-24T02:42:48.238Z,1527129768.238 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0052.lzma.bak
2018-05-24T02:42:48.238Z,1527129768.238 [DataOverHttps](INFO): SBD MOMSN=8291469
2018-05-24T02:42:57.114Z,1527129777.114 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0053.lzma
2018-05-24T02:42:57.920Z,1527129777.920 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0053.lzma.bak
2018-05-24T02:42:57.921Z,1527129777.921 [DataOverHttps](INFO): SBD MOMSN=8291471
2018-05-24T02:42:58.798Z,1527129778.798 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T02:42:58.799Z,1527129778.799 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T02:42:58.799Z,1527129778.799 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T02:43:16.069Z,1527129796.069 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:43:16.069Z,1527129796.069 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T02:43:16.069Z,1527129796.069 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:43:16.070Z,1527129796.070 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:43:16.071Z,1527129796.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T02:43:16.071Z,1527129796.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:43:16.112Z,1527129796.112 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:43:16.112Z,1527129796.112 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:43:16.475Z,1527129796.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:43:16.475Z,1527129796.475 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T02:43:16.476Z,1527129796.476 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:43:16.476Z,1527129796.476 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T02:43:16.871Z,1527129796.871 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:43:16.871Z,1527129796.871 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:43:16.872Z,1527129796.872 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:43:16.872Z,1527129796.872 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:43:16.872Z,1527129796.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:43:16.873Z,1527129796.873 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:46:17.178Z,1527129977.178 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:46:17.178Z,1527129977.178 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T02:46:17.178Z,1527129977.178 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:46:17.180Z,1527129977.180 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:46:17.180Z,1527129977.180 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T02:46:17.180Z,1527129977.180 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:46:17.230Z,1527129977.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:46:17.231Z,1527129977.231 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:46:17.608Z,1527129977.608 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:46:17.608Z,1527129977.608 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T02:46:17.608Z,1527129977.608 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:46:17.613Z,1527129977.613 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T02:46:17.979Z,1527129977.979 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:46:17.980Z,1527129977.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:46:17.980Z,1527129977.980 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:46:17.981Z,1527129977.981 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:46:17.981Z,1527129977.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:46:17.981Z,1527129977.981 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:47:59.190Z,1527130079.190 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T02:47:59.190Z,1527130079.190 [Default:CheckIn:C.Wait] Stopped
2018-05-24T02:47:59.190Z,1527130079.190 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T02:47:59.190Z,1527130079.190 [Default:CheckIn:D] Running Loop=1
2018-05-24T02:47:59.585Z,1527130079.585 [Default:CheckIn:D] Stopped
2018-05-24T02:47:59.585Z,1527130079.585 [Default:CheckIn:E] Running Loop=1
2018-05-24T02:47:59.989Z,1527130079.989 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 176.357454 min 
2018-05-24T02:47:59.990Z,1527130079.990 [Default:CheckIn:E] Stopped
2018-05-24T02:47:59.990Z,1527130079.990 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T02:47:59.990Z,1527130079.990 [Default:CheckIn] Stopped
2018-05-24T02:47:59.990Z,1527130079.990 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T02:47:59.990Z,1527130079.990 [Default:CheckIn](INFO): Running loop #18
2018-05-24T02:47:59.990Z,1527130079.990 [Default:CheckIn] Running Loop=18
2018-05-24T02:47:59.990Z,1527130079.990 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T02:47:59.990Z,1527130079.990 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T02:48:24.885Z,1527130104.885 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T02:49:18.049Z,1527130158.049 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:49:18.050Z,1527130158.050 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T02:49:18.050Z,1527130158.050 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:49:18.051Z,1527130158.051 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:49:18.051Z,1527130158.051 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T02:49:18.052Z,1527130158.052 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:49:18.080Z,1527130158.080 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:49:18.080Z,1527130158.080 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:49:18.455Z,1527130158.455 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:49:18.455Z,1527130158.455 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T02:49:18.456Z,1527130158.456 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:49:18.456Z,1527130158.456 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T02:49:18.844Z,1527130158.844 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:49:18.844Z,1527130158.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:49:18.844Z,1527130158.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:49:18.845Z,1527130158.845 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:49:18.845Z,1527130158.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:49:18.846Z,1527130158.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:52:19.171Z,1527130339.171 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:52:19.171Z,1527130339.171 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T02:52:19.171Z,1527130339.171 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:52:19.173Z,1527130339.173 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:52:19.173Z,1527130339.173 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T02:52:19.173Z,1527130339.173 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:52:19.185Z,1527130339.185 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:52:19.186Z,1527130339.186 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:52:19.588Z,1527130339.588 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:52:19.588Z,1527130339.588 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T02:52:19.589Z,1527130339.589 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:52:19.589Z,1527130339.589 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T02:52:19.944Z,1527130339.944 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:52:19.945Z,1527130339.945 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:52:19.945Z,1527130339.945 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:52:19.946Z,1527130339.946 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:52:19.946Z,1527130339.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:52:19.946Z,1527130339.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:53:00.348Z,1527130380.348 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T02:47:59.0Z
2018-05-24T02:53:00.348Z,1527130380.348 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T02:53:00.348Z,1527130380.348 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T02:53:04.781Z,1527130384.781 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180523T234807/Courier0055.lzma
2018-05-24T02:53:05.574Z,1527130385.574 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0055.lzma.bak
2018-05-24T02:53:05.574Z,1527130385.574 [DataOverHttps](INFO): SBD MOMSN=8291474
2018-05-24T02:53:14.422Z,1527130394.422 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0056.lzma
2018-05-24T02:53:15.202Z,1527130395.202 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0056.lzma.bak
2018-05-24T02:53:15.203Z,1527130395.203 [DataOverHttps](INFO): SBD MOMSN=8291476
2018-05-24T02:53:16.144Z,1527130396.144 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T02:53:16.144Z,1527130396.144 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T02:53:16.144Z,1527130396.144 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T02:55:20.114Z,1527130520.114 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:55:20.114Z,1527130520.114 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T02:55:20.114Z,1527130520.114 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:55:20.116Z,1527130520.116 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:55:20.116Z,1527130520.116 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T02:55:20.116Z,1527130520.116 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:55:20.128Z,1527130520.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:55:20.128Z,1527130520.128 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:55:20.251Z,1527130520.251 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:55:20.251Z,1527130520.251 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T02:55:20.251Z,1527130520.251 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:55:20.251Z,1527130520.251 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T02:55:20.579Z,1527130520.579 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:55:20.580Z,1527130520.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:55:20.580Z,1527130520.580 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:55:20.580Z,1527130520.580 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:55:20.581Z,1527130520.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:55:20.581Z,1527130520.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:58:16.543Z,1527130696.543 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T02:58:16.544Z,1527130696.544 [Default:CheckIn:C.Wait] Stopped
2018-05-24T02:58:16.544Z,1527130696.544 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T02:58:16.544Z,1527130696.544 [Default:CheckIn:D] Running Loop=1
2018-05-24T02:58:16.930Z,1527130696.930 [Default:CheckIn:D] Stopped
2018-05-24T02:58:16.930Z,1527130696.930 [Default:CheckIn:E] Running Loop=1
2018-05-24T02:58:17.331Z,1527130697.331 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 186.646549 min 
2018-05-24T02:58:17.331Z,1527130697.331 [Default:CheckIn:E] Stopped
2018-05-24T02:58:17.331Z,1527130697.331 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T02:58:17.331Z,1527130697.331 [Default:CheckIn] Stopped
2018-05-24T02:58:17.331Z,1527130697.331 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T02:58:17.332Z,1527130697.332 [Default:CheckIn](INFO): Running loop #19
2018-05-24T02:58:17.332Z,1527130697.332 [Default:CheckIn] Running Loop=19
2018-05-24T02:58:17.332Z,1527130697.332 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T02:58:17.332Z,1527130697.332 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T02:58:21.240Z,1527130701.240 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:58:21.240Z,1527130701.240 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T02:58:21.240Z,1527130701.240 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T02:58:21.242Z,1527130701.242 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T02:58:21.242Z,1527130701.242 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T02:58:21.242Z,1527130701.242 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T02:58:21.274Z,1527130701.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T02:58:21.274Z,1527130701.274 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T02:58:21.407Z,1527130701.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T02:58:21.407Z,1527130701.407 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T02:58:21.407Z,1527130701.407 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T02:58:21.408Z,1527130701.408 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T02:58:21.731Z,1527130701.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T02:58:21.731Z,1527130701.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:58:21.732Z,1527130701.732 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:58:21.732Z,1527130701.732 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T02:58:21.732Z,1527130701.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T02:58:21.733Z,1527130701.733 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T02:58:24.960Z,1527130704.960 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T03:01:22.385Z,1527130882.385 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:01:22.385Z,1527130882.385 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T03:01:22.385Z,1527130882.385 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:01:22.387Z,1527130882.387 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:01:22.387Z,1527130882.387 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T03:01:22.387Z,1527130882.387 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:01:22.412Z,1527130882.412 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:01:22.412Z,1527130882.412 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:01:22.527Z,1527130882.527 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:01:22.527Z,1527130882.527 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T03:01:22.527Z,1527130882.527 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:01:22.527Z,1527130882.527 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T03:01:22.877Z,1527130882.877 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:01:22.877Z,1527130882.877 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:01:22.878Z,1527130882.878 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:01:22.878Z,1527130882.878 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:01:22.878Z,1527130882.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:01:22.879Z,1527130882.879 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:03:17.664Z,1527130997.664 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T02:58:17.3Z
2018-05-24T03:03:17.664Z,1527130997.664 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T03:03:17.664Z,1527130997.664 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T03:03:22.067Z,1527131002.067 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0058.lzma
2018-05-24T03:03:22.866Z,1527131002.866 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0058.lzma.bak
2018-05-24T03:03:22.866Z,1527131002.866 [DataOverHttps](INFO): SBD MOMSN=8291479
2018-05-24T03:03:31.733Z,1527131011.733 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0059.lzma
2018-05-24T03:03:32.534Z,1527131012.534 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0059.lzma.bak
2018-05-24T03:03:32.534Z,1527131012.534 [DataOverHttps](INFO): SBD MOMSN=8291481
2018-05-24T03:03:33.388Z,1527131013.388 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T03:03:33.388Z,1527131013.388 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T03:03:33.388Z,1527131013.388 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T03:04:23.041Z,1527131063.041 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:04:23.042Z,1527131063.042 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T03:04:23.042Z,1527131063.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:04:23.043Z,1527131063.043 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:04:23.043Z,1527131063.043 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T03:04:23.043Z,1527131063.043 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:04:23.055Z,1527131063.055 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:04:23.055Z,1527131063.055 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:04:23.458Z,1527131063.458 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:04:23.458Z,1527131063.458 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T03:04:23.459Z,1527131063.459 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:04:23.459Z,1527131063.459 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T03:04:23.843Z,1527131063.843 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:04:23.843Z,1527131063.843 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:04:23.844Z,1527131063.844 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:04:23.844Z,1527131063.844 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:04:23.845Z,1527131063.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:04:23.845Z,1527131063.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:07:24.172Z,1527131244.172 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:07:24.172Z,1527131244.172 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T03:07:24.172Z,1527131244.172 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:07:24.174Z,1527131244.174 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:07:24.174Z,1527131244.174 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T03:07:24.174Z,1527131244.174 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:07:24.218Z,1527131244.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:07:24.219Z,1527131244.219 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:07:24.575Z,1527131244.575 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:07:24.575Z,1527131244.575 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T03:07:24.576Z,1527131244.576 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:07:24.576Z,1527131244.576 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T03:07:24.968Z,1527131244.968 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:07:24.968Z,1527131244.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:07:24.968Z,1527131244.968 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:07:24.969Z,1527131244.969 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:07:24.969Z,1527131244.969 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:07:24.970Z,1527131244.970 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:08:25.366Z,1527131305.366 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T03:08:33.733Z,1527131313.733 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T03:08:33.733Z,1527131313.733 [Default:CheckIn:C.Wait] Stopped
2018-05-24T03:08:33.734Z,1527131313.734 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T03:08:33.734Z,1527131313.734 [Default:CheckIn:D] Running Loop=1
2018-05-24T03:08:34.129Z,1527131314.129 [Default:CheckIn:D] Stopped
2018-05-24T03:08:34.129Z,1527131314.129 [Default:CheckIn:E] Running Loop=1
2018-05-24T03:08:34.531Z,1527131314.531 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.933203 min 
2018-05-24T03:08:34.531Z,1527131314.531 [Default:CheckIn:E] Stopped
2018-05-24T03:08:34.531Z,1527131314.531 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T03:08:34.531Z,1527131314.531 [Default:CheckIn] Stopped
2018-05-24T03:08:34.531Z,1527131314.531 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T03:08:34.531Z,1527131314.531 [Default:CheckIn](INFO): Running loop #20
2018-05-24T03:08:34.531Z,1527131314.531 [Default:CheckIn] Running Loop=20
2018-05-24T03:08:34.532Z,1527131314.532 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T03:08:34.532Z,1527131314.532 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T03:10:25.309Z,1527131425.309 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:10:25.309Z,1527131425.309 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T03:10:25.309Z,1527131425.309 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:10:25.311Z,1527131425.311 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:10:25.311Z,1527131425.311 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T03:10:25.311Z,1527131425.311 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:10:25.322Z,1527131425.322 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:10:25.323Z,1527131425.323 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:10:25.720Z,1527131425.720 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:10:25.720Z,1527131425.720 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T03:10:25.721Z,1527131425.721 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:10:25.721Z,1527131425.721 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T03:10:26.119Z,1527131426.119 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:10:26.119Z,1527131426.119 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:10:26.120Z,1527131426.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:10:26.120Z,1527131426.120 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:10:26.120Z,1527131426.120 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:10:26.121Z,1527131426.121 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:13:26.477Z,1527131606.477 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:13:26.477Z,1527131606.477 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T03:13:26.477Z,1527131606.477 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:13:26.479Z,1527131606.479 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:13:26.479Z,1527131606.479 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T03:13:26.479Z,1527131606.479 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:13:26.491Z,1527131606.491 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:13:26.492Z,1527131606.492 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:13:26.887Z,1527131606.887 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:13:26.887Z,1527131606.887 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T03:13:26.887Z,1527131606.887 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:13:26.887Z,1527131606.887 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T03:13:27.274Z,1527131607.274 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:13:27.274Z,1527131607.274 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:13:27.275Z,1527131607.275 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:13:27.275Z,1527131607.275 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:13:27.275Z,1527131607.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:13:27.276Z,1527131607.276 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:13:34.877Z,1527131614.877 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T03:08:34.5Z
2018-05-24T03:13:34.877Z,1527131614.877 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T03:13:34.877Z,1527131614.877 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T03:13:39.297Z,1527131619.297 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0061.lzma
2018-05-24T03:13:40.098Z,1527131620.098 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0061.lzma.bak
2018-05-24T03:13:40.099Z,1527131620.099 [DataOverHttps](INFO): SBD MOMSN=8291484
2018-05-24T03:13:48.972Z,1527131628.972 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0062.lzma
2018-05-24T03:13:49.770Z,1527131629.770 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0062.lzma.bak
2018-05-24T03:13:49.770Z,1527131629.770 [DataOverHttps](INFO): SBD MOMSN=8291486
2018-05-24T03:13:50.623Z,1527131630.623 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T03:13:50.623Z,1527131630.623 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T03:13:50.623Z,1527131630.623 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T03:16:27.460Z,1527131787.460 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:16:27.460Z,1527131787.460 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T03:16:27.460Z,1527131787.460 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:16:27.462Z,1527131787.462 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:16:27.462Z,1527131787.462 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T03:16:27.462Z,1527131787.462 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:16:27.521Z,1527131787.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:16:27.522Z,1527131787.522 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:16:27.909Z,1527131787.909 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:16:27.910Z,1527131787.910 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T03:16:27.910Z,1527131787.910 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:16:27.910Z,1527131787.910 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T03:16:28.255Z,1527131788.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:16:28.256Z,1527131788.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:16:28.256Z,1527131788.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:16:28.256Z,1527131788.256 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:16:28.257Z,1527131788.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:16:28.257Z,1527131788.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:18:25.434Z,1527131905.434 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T03:18:51.002Z,1527131931.002 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T03:18:51.002Z,1527131931.002 [Default:CheckIn:C.Wait] Stopped
2018-05-24T03:18:51.002Z,1527131931.002 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T03:18:51.002Z,1527131931.002 [Default:CheckIn:D] Running Loop=1
2018-05-24T03:18:51.405Z,1527131931.405 [Default:CheckIn:D] Stopped
2018-05-24T03:18:51.406Z,1527131931.406 [Default:CheckIn:E] Running Loop=1
2018-05-24T03:18:51.802Z,1527131931.802 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 207.221126 min 
2018-05-24T03:18:51.803Z,1527131931.803 [Default:CheckIn:E] Stopped
2018-05-24T03:18:51.803Z,1527131931.803 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T03:18:51.803Z,1527131931.803 [Default:CheckIn] Stopped
2018-05-24T03:18:51.803Z,1527131931.803 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T03:18:51.803Z,1527131931.803 [Default:CheckIn](INFO): Running loop #21
2018-05-24T03:18:51.803Z,1527131931.803 [Default:CheckIn] Running Loop=21
2018-05-24T03:18:51.803Z,1527131931.803 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T03:18:51.804Z,1527131931.804 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T03:19:28.589Z,1527131968.589 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:19:28.589Z,1527131968.589 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T03:19:28.589Z,1527131968.589 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:19:28.591Z,1527131968.591 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:19:28.591Z,1527131968.591 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T03:19:28.591Z,1527131968.591 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:19:28.644Z,1527131968.644 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:19:28.645Z,1527131968.645 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:19:28.645Z,1527131968.645 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:19:28.645Z,1527131968.645 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:23:52.087Z,1527132232.087 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T03:18:51.8Z
2018-05-24T03:23:52.087Z,1527132232.087 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T03:23:52.087Z,1527132232.087 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T03:23:56.502Z,1527132236.502 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0064.lzma
2018-05-24T03:23:57.302Z,1527132237.302 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0064.lzma.bak
2018-05-24T03:23:57.302Z,1527132237.302 [DataOverHttps](INFO): SBD MOMSN=8291489
2018-05-24T03:24:06.159Z,1527132246.159 [DataOverHttps](INFO): Sending 178 bytes from file Logs/20180523T234807/Express0065.lzma
2018-05-24T03:24:06.958Z,1527132246.958 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0065.lzma.bak
2018-05-24T03:24:06.959Z,1527132246.959 [DataOverHttps](INFO): SBD MOMSN=8291491
2018-05-24T03:24:07.809Z,1527132247.809 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T03:24:07.809Z,1527132247.809 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T03:24:07.809Z,1527132247.809 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T03:28:25.575Z,1527132505.575 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T03:29:07.951Z,1527132547.951 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T03:29:07.951Z,1527132547.951 [Default:CheckIn:C.Wait] Stopped
2018-05-24T03:29:07.951Z,1527132547.951 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T03:29:07.951Z,1527132547.951 [Default:CheckIn:D] Running Loop=1
2018-05-24T03:29:08.352Z,1527132548.352 [Default:CheckIn:D] Stopped
2018-05-24T03:29:08.352Z,1527132548.352 [Default:CheckIn:E] Running Loop=1
2018-05-24T03:29:08.748Z,1527132548.748 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 217.503581 min 
2018-05-24T03:29:08.748Z,1527132548.748 [Default:CheckIn:E] Stopped
2018-05-24T03:29:08.748Z,1527132548.748 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T03:29:08.748Z,1527132548.748 [Default:CheckIn] Stopped
2018-05-24T03:29:08.748Z,1527132548.748 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T03:29:08.748Z,1527132548.748 [Default:CheckIn](INFO): Running loop #22
2018-05-24T03:29:08.748Z,1527132548.748 [Default:CheckIn] Running Loop=22
2018-05-24T03:29:08.749Z,1527132548.749 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T03:29:08.749Z,1527132548.749 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T03:34:09.032Z,1527132849.032 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T03:29:08.7Z
2018-05-24T03:34:09.032Z,1527132849.032 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T03:34:09.032Z,1527132849.032 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T03:34:13.546Z,1527132853.546 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0067.lzma
2018-05-24T03:34:14.346Z,1527132854.346 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0067.lzma.bak
2018-05-24T03:34:14.346Z,1527132854.346 [DataOverHttps](INFO): SBD MOMSN=8291496
2018-05-24T03:34:23.404Z,1527132863.404 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0068.lzma
2018-05-24T03:34:24.202Z,1527132864.202 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0068.lzma.bak
2018-05-24T03:34:24.203Z,1527132864.203 [DataOverHttps](INFO): SBD MOMSN=8291498
2018-05-24T03:34:25.053Z,1527132865.053 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T03:34:25.053Z,1527132865.053 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T03:34:25.053Z,1527132865.053 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T03:34:28.759Z,1527132868.759 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:34:28.759Z,1527132868.759 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T03:34:28.759Z,1527132868.759 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:34:28.759Z,1527132868.759 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T03:34:29.115Z,1527132869.115 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:34:29.115Z,1527132869.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:34:29.116Z,1527132869.116 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:34:29.116Z,1527132869.116 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:34:29.116Z,1527132869.116 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:34:29.117Z,1527132869.117 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:37:29.358Z,1527133049.358 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:37:29.358Z,1527133049.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T03:37:29.358Z,1527133049.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:37:29.360Z,1527133049.360 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:37:29.360Z,1527133049.360 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T03:37:29.360Z,1527133049.360 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:37:29.396Z,1527133049.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:37:29.405Z,1527133049.405 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:37:29.521Z,1527133049.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:37:29.521Z,1527133049.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T03:37:29.522Z,1527133049.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:37:29.522Z,1527133049.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T03:37:29.863Z,1527133049.863 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:37:29.863Z,1527133049.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:37:29.864Z,1527133049.864 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:37:29.864Z,1527133049.864 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:37:29.864Z,1527133049.864 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:37:29.865Z,1527133049.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:38:25.877Z,1527133105.877 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T03:39:25.426Z,1527133165.426 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T03:39:25.427Z,1527133165.427 [Default:CheckIn:C.Wait] Stopped
2018-05-24T03:39:25.427Z,1527133165.427 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T03:39:25.427Z,1527133165.427 [Default:CheckIn:D] Running Loop=1
2018-05-24T03:39:25.822Z,1527133165.822 [Default:CheckIn:D] Stopped
2018-05-24T03:39:25.822Z,1527133165.822 [Default:CheckIn:E] Running Loop=1
2018-05-24T03:39:26.224Z,1527133166.224 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.794743 min 
2018-05-24T03:39:26.224Z,1527133166.224 [Default:CheckIn:E] Stopped
2018-05-24T03:39:26.224Z,1527133166.224 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T03:39:26.224Z,1527133166.224 [Default:CheckIn] Stopped
2018-05-24T03:39:26.224Z,1527133166.224 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T03:39:26.224Z,1527133166.224 [Default:CheckIn](INFO): Running loop #23
2018-05-24T03:39:26.224Z,1527133166.224 [Default:CheckIn] Running Loop=23
2018-05-24T03:39:26.225Z,1527133166.225 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T03:39:26.225Z,1527133166.225 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T03:40:30.498Z,1527133230.498 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:40:30.498Z,1527133230.498 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T03:40:30.498Z,1527133230.498 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:40:30.500Z,1527133230.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:40:30.500Z,1527133230.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T03:40:30.500Z,1527133230.500 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:40:30.512Z,1527133230.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:40:30.513Z,1527133230.513 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:40:30.666Z,1527133230.666 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:40:30.666Z,1527133230.666 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T03:40:30.666Z,1527133230.666 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:40:30.666Z,1527133230.666 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T03:40:30.971Z,1527133230.971 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:40:30.971Z,1527133230.971 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:40:30.972Z,1527133230.972 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:40:30.972Z,1527133230.972 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:40:30.972Z,1527133230.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:40:30.974Z,1527133230.974 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:43:31.601Z,1527133411.601 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:43:31.601Z,1527133411.601 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T03:43:31.601Z,1527133411.601 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:43:31.603Z,1527133411.603 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:43:31.603Z,1527133411.603 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T03:43:31.603Z,1527133411.603 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:43:31.615Z,1527133411.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:43:31.615Z,1527133411.615 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:43:31.763Z,1527133411.763 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:43:31.763Z,1527133411.763 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T03:43:31.763Z,1527133411.763 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:43:31.764Z,1527133411.764 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T03:43:32.065Z,1527133412.065 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:43:32.066Z,1527133412.066 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:43:32.066Z,1527133412.066 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:43:32.066Z,1527133412.066 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:43:32.067Z,1527133412.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:43:32.067Z,1527133412.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:44:26.478Z,1527133466.478 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T03:39:26.2Z
2018-05-24T03:44:26.478Z,1527133466.478 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T03:44:26.478Z,1527133466.478 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T03:44:30.830Z,1527133470.830 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0070.lzma
2018-05-24T03:44:31.596Z,1527133471.596 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0070.lzma.bak
2018-05-24T03:44:31.596Z,1527133471.596 [DataOverHttps](INFO): SBD MOMSN=8291501
2018-05-24T03:44:40.484Z,1527133480.484 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0071.lzma
2018-05-24T03:44:41.254Z,1527133481.254 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0071.lzma.bak
2018-05-24T03:44:41.254Z,1527133481.254 [DataOverHttps](INFO): SBD MOMSN=8291503
2018-05-24T03:44:42.197Z,1527133482.197 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T03:44:42.197Z,1527133482.197 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T03:44:42.197Z,1527133482.197 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T03:46:32.212Z,1527133592.212 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:46:32.212Z,1527133592.212 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T03:46:32.212Z,1527133592.212 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:46:32.213Z,1527133592.213 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:46:32.214Z,1527133592.214 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T03:46:32.214Z,1527133592.214 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:46:32.249Z,1527133592.249 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:46:32.249Z,1527133592.249 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:46:32.623Z,1527133592.623 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:46:32.623Z,1527133592.623 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T03:46:32.623Z,1527133592.623 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:46:32.623Z,1527133592.623 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T03:46:33.019Z,1527133593.019 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:46:33.019Z,1527133593.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:46:33.020Z,1527133593.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:46:33.020Z,1527133593.020 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:46:33.020Z,1527133593.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:46:33.021Z,1527133593.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:48:26.205Z,1527133706.205 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T03:49:33.344Z,1527133773.344 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:49:33.344Z,1527133773.344 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T03:49:33.344Z,1527133773.344 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:49:33.346Z,1527133773.346 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:49:33.346Z,1527133773.346 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T03:49:33.346Z,1527133773.346 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:49:33.370Z,1527133773.370 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:49:33.370Z,1527133773.370 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:49:33.757Z,1527133773.757 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:49:33.757Z,1527133773.757 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T03:49:33.758Z,1527133773.758 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:49:33.758Z,1527133773.758 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T03:49:34.146Z,1527133774.146 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:49:34.147Z,1527133774.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:49:34.147Z,1527133774.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:49:34.147Z,1527133774.147 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:49:34.148Z,1527133774.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:49:34.148Z,1527133774.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:49:42.549Z,1527133782.549 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T03:49:42.549Z,1527133782.549 [Default:CheckIn:C.Wait] Stopped
2018-05-24T03:49:42.550Z,1527133782.550 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T03:49:42.550Z,1527133782.550 [Default:CheckIn:D] Running Loop=1
2018-05-24T03:49:42.947Z,1527133782.947 [Default:CheckIn:D] Stopped
2018-05-24T03:49:42.947Z,1527133782.947 [Default:CheckIn:E] Running Loop=1
2018-05-24T03:49:43.347Z,1527133783.347 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 238.080160 min 
2018-05-24T03:49:43.347Z,1527133783.347 [Default:CheckIn:E] Stopped
2018-05-24T03:49:43.347Z,1527133783.347 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T03:49:43.347Z,1527133783.347 [Default:CheckIn] Stopped
2018-05-24T03:49:43.348Z,1527133783.348 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T03:49:43.348Z,1527133783.348 [Default:CheckIn](INFO): Running loop #24
2018-05-24T03:49:43.348Z,1527133783.348 [Default:CheckIn] Running Loop=24
2018-05-24T03:49:43.348Z,1527133783.348 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T03:49:43.348Z,1527133783.348 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T03:52:34.197Z,1527133954.197 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:52:34.198Z,1527133954.198 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T03:52:34.198Z,1527133954.198 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:52:34.199Z,1527133954.199 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:52:34.199Z,1527133954.199 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T03:52:34.199Z,1527133954.199 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:52:34.211Z,1527133954.211 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:52:34.211Z,1527133954.211 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:52:34.609Z,1527133954.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:52:34.609Z,1527133954.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T03:52:34.610Z,1527133954.610 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:52:34.610Z,1527133954.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T03:52:35.003Z,1527133955.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:52:35.003Z,1527133955.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:52:35.004Z,1527133955.004 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:52:35.004Z,1527133955.004 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:52:35.004Z,1527133955.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:52:35.005Z,1527133955.005 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:54:43.358Z,1527134083.358 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T03:49:43.3Z
2018-05-24T03:54:43.358Z,1527134083.358 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T03:54:43.358Z,1527134083.358 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T03:54:47.705Z,1527134087.705 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0073.lzma
2018-05-24T03:54:48.474Z,1527134088.474 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0073.lzma.bak
2018-05-24T03:54:48.475Z,1527134088.475 [DataOverHttps](INFO): SBD MOMSN=8291506
2018-05-24T03:54:57.360Z,1527134097.360 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0074.lzma
2018-05-24T03:54:58.162Z,1527134098.162 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0074.lzma.bak
2018-05-24T03:54:58.162Z,1527134098.162 [DataOverHttps](INFO): SBD MOMSN=8291508
2018-05-24T03:54:59.047Z,1527134099.047 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T03:54:59.047Z,1527134099.047 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T03:54:59.048Z,1527134099.048 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T03:55:35.259Z,1527134135.259 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:55:35.259Z,1527134135.259 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T03:55:35.259Z,1527134135.259 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:55:35.261Z,1527134135.261 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:55:35.261Z,1527134135.261 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T03:55:35.261Z,1527134135.261 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:55:35.297Z,1527134135.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:55:35.298Z,1527134135.298 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:55:35.672Z,1527134135.672 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:55:35.672Z,1527134135.672 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T03:55:35.672Z,1527134135.672 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:55:35.672Z,1527134135.672 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T03:55:36.061Z,1527134136.061 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:55:36.061Z,1527134136.061 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:55:36.062Z,1527134136.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:55:36.062Z,1527134136.062 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:55:36.062Z,1527134136.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:55:36.063Z,1527134136.063 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:58:26.401Z,1527134306.401 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T03:58:36.384Z,1527134316.384 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:58:36.384Z,1527134316.384 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T03:58:36.384Z,1527134316.384 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T03:58:36.386Z,1527134316.386 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T03:58:36.386Z,1527134316.386 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T03:58:36.386Z,1527134316.386 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T03:58:36.397Z,1527134316.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T03:58:36.398Z,1527134316.398 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T03:58:36.793Z,1527134316.793 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T03:58:36.793Z,1527134316.793 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T03:58:36.794Z,1527134316.794 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T03:58:36.794Z,1527134316.794 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T03:58:37.174Z,1527134317.174 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T03:58:37.174Z,1527134317.174 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:58:37.175Z,1527134317.175 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:58:37.175Z,1527134317.175 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T03:58:37.175Z,1527134317.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T03:58:37.176Z,1527134317.176 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T03:59:59.224Z,1527134399.224 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T03:59:59.224Z,1527134399.224 [Default:CheckIn:C.Wait] Stopped
2018-05-24T03:59:59.225Z,1527134399.225 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T03:59:59.225Z,1527134399.225 [Default:CheckIn:D] Running Loop=1
2018-05-24T03:59:59.629Z,1527134399.629 [Default:CheckIn:D] Stopped
2018-05-24T03:59:59.629Z,1527134399.629 [Default:CheckIn:E] Running Loop=1
2018-05-24T04:00:00.028Z,1527134400.028 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 248.358187 min 
2018-05-24T04:00:00.028Z,1527134400.028 [Default:CheckIn:E] Stopped
2018-05-24T04:00:00.028Z,1527134400.028 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T04:00:00.028Z,1527134400.028 [Default:CheckIn] Stopped
2018-05-24T04:00:00.028Z,1527134400.028 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T04:00:00.029Z,1527134400.029 [Default:CheckIn](INFO): Running loop #25
2018-05-24T04:00:00.029Z,1527134400.029 [Default:CheckIn] Running Loop=25
2018-05-24T04:00:00.029Z,1527134400.029 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T04:00:00.029Z,1527134400.029 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T04:01:37.179Z,1527134497.179 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:01:37.179Z,1527134497.179 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T04:01:37.179Z,1527134497.179 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:01:37.181Z,1527134497.181 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:01:37.181Z,1527134497.181 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T04:01:37.181Z,1527134497.181 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:01:37.192Z,1527134497.192 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:01:37.193Z,1527134497.193 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:01:37.589Z,1527134497.589 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:01:37.589Z,1527134497.589 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T04:01:37.590Z,1527134497.590 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:01:37.590Z,1527134497.590 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T04:01:37.970Z,1527134497.970 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:01:37.970Z,1527134497.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:01:37.970Z,1527134497.970 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:01:37.971Z,1527134497.971 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:01:37.971Z,1527134497.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:01:37.972Z,1527134497.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:04:38.313Z,1527134678.313 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:04:38.313Z,1527134678.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T04:04:38.313Z,1527134678.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:04:38.314Z,1527134678.314 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:04:38.315Z,1527134678.315 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T04:04:38.315Z,1527134678.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:04:38.345Z,1527134678.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:04:38.345Z,1527134678.345 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:04:38.718Z,1527134678.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:04:38.718Z,1527134678.718 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T04:04:38.719Z,1527134678.719 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:04:38.719Z,1527134678.719 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T04:04:39.104Z,1527134679.104 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:04:39.104Z,1527134679.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:04:39.105Z,1527134679.105 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:04:39.105Z,1527134679.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:04:39.106Z,1527134679.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:04:39.106Z,1527134679.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:05:00.311Z,1527134700.311 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T04:00:00.0Z
2018-05-24T04:05:00.311Z,1527134700.311 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T04:05:00.311Z,1527134700.311 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T04:05:04.625Z,1527134704.625 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0076.lzma
2018-05-24T04:05:05.426Z,1527134705.426 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0076.lzma.bak
2018-05-24T04:05:05.426Z,1527134705.426 [DataOverHttps](INFO): SBD MOMSN=8291511
2018-05-24T04:05:14.532Z,1527134714.532 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0077.lzma
2018-05-24T04:05:15.330Z,1527134715.330 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0077.lzma.bak
2018-05-24T04:05:15.330Z,1527134715.330 [DataOverHttps](INFO): SBD MOMSN=8291513
2018-05-24T04:05:16.206Z,1527134716.206 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T04:05:16.206Z,1527134716.206 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T04:05:16.206Z,1527134716.206 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T04:07:39.393Z,1527134859.393 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:07:39.393Z,1527134859.393 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T04:07:39.393Z,1527134859.393 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:07:39.395Z,1527134859.395 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:07:39.395Z,1527134859.395 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T04:07:39.395Z,1527134859.395 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:07:39.407Z,1527134859.407 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:07:39.407Z,1527134859.407 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:07:39.806Z,1527134859.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:07:39.806Z,1527134859.806 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T04:07:39.806Z,1527134859.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:07:39.806Z,1527134859.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T04:07:40.188Z,1527134860.188 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:07:40.188Z,1527134860.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:07:40.188Z,1527134860.188 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:07:40.189Z,1527134860.189 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:07:40.189Z,1527134860.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:07:40.190Z,1527134860.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:08:26.586Z,1527134906.586 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T04:10:16.533Z,1527135016.533 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T04:10:16.533Z,1527135016.533 [Default:CheckIn:C.Wait] Stopped
2018-05-24T04:10:16.534Z,1527135016.534 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T04:10:16.534Z,1527135016.534 [Default:CheckIn:D] Running Loop=1
2018-05-24T04:10:16.937Z,1527135016.937 [Default:CheckIn:D] Stopped
2018-05-24T04:10:16.938Z,1527135016.938 [Default:CheckIn:E] Running Loop=1
2018-05-24T04:10:17.331Z,1527135017.331 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 258.646663 min 
2018-05-24T04:10:17.331Z,1527135017.331 [Default:CheckIn:E] Stopped
2018-05-24T04:10:17.331Z,1527135017.331 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T04:10:17.331Z,1527135017.331 [Default:CheckIn] Stopped
2018-05-24T04:10:17.331Z,1527135017.331 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T04:10:17.332Z,1527135017.332 [Default:CheckIn](INFO): Running loop #26
2018-05-24T04:10:17.332Z,1527135017.332 [Default:CheckIn] Running Loop=26
2018-05-24T04:10:17.332Z,1527135017.332 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T04:10:17.332Z,1527135017.332 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T04:10:40.502Z,1527135040.502 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:10:40.502Z,1527135040.502 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T04:10:40.502Z,1527135040.502 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:10:40.503Z,1527135040.503 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:10:40.504Z,1527135040.504 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T04:10:40.504Z,1527135040.504 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:10:40.516Z,1527135040.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:10:40.516Z,1527135040.516 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:10:40.914Z,1527135040.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:10:40.914Z,1527135040.914 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T04:10:40.914Z,1527135040.914 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:10:40.914Z,1527135040.914 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T04:10:41.307Z,1527135041.307 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:10:41.307Z,1527135041.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:10:41.308Z,1527135041.308 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:10:41.308Z,1527135041.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:10:41.308Z,1527135041.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:10:41.309Z,1527135041.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:13:41.633Z,1527135221.633 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:13:41.633Z,1527135221.633 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T04:13:41.633Z,1527135221.633 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:13:41.635Z,1527135221.635 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:13:41.635Z,1527135221.635 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T04:13:41.635Z,1527135221.635 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:13:41.647Z,1527135221.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:13:41.648Z,1527135221.648 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:13:42.048Z,1527135222.048 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:13:42.048Z,1527135222.048 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T04:13:42.049Z,1527135222.049 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:13:42.049Z,1527135222.049 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T04:13:42.431Z,1527135222.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:13:42.432Z,1527135222.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:13:42.432Z,1527135222.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:13:42.432Z,1527135222.432 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:13:42.433Z,1527135222.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:13:42.433Z,1527135222.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:15:17.611Z,1527135317.611 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T04:10:17.3Z
2018-05-24T04:15:17.611Z,1527135317.611 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T04:15:17.611Z,1527135317.611 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T04:15:21.927Z,1527135321.927 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0079.lzma
2018-05-24T04:15:22.726Z,1527135322.726 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0079.lzma.bak
2018-05-24T04:15:22.726Z,1527135322.726 [DataOverHttps](INFO): SBD MOMSN=8291516
2018-05-24T04:15:31.593Z,1527135331.593 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0080.lzma
2018-05-24T04:15:32.394Z,1527135332.394 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0080.lzma.bak
2018-05-24T04:15:32.394Z,1527135332.394 [DataOverHttps](INFO): SBD MOMSN=8291518
2018-05-24T04:15:33.255Z,1527135333.255 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T04:15:33.255Z,1527135333.255 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T04:15:33.255Z,1527135333.255 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T04:16:42.499Z,1527135402.499 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:16:42.499Z,1527135402.499 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T04:16:42.499Z,1527135402.499 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:16:42.500Z,1527135402.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:16:42.501Z,1527135402.501 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T04:16:42.501Z,1527135402.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:16:42.513Z,1527135402.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:16:42.513Z,1527135402.513 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:16:42.907Z,1527135402.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:16:42.907Z,1527135402.907 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T04:16:42.907Z,1527135402.907 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:16:42.908Z,1527135402.908 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T04:16:43.299Z,1527135403.299 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:16:43.299Z,1527135403.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:16:43.300Z,1527135403.300 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:16:43.300Z,1527135403.300 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:16:43.300Z,1527135403.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:16:43.301Z,1527135403.301 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:18:26.905Z,1527135506.905 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T04:19:43.618Z,1527135583.618 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:19:43.619Z,1527135583.619 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T04:19:43.619Z,1527135583.619 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:19:43.620Z,1527135583.620 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:19:43.620Z,1527135583.620 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T04:19:43.620Z,1527135583.620 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:19:43.632Z,1527135583.632 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:19:43.632Z,1527135583.632 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:19:44.033Z,1527135584.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:19:44.033Z,1527135584.033 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T04:19:44.034Z,1527135584.034 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:19:44.034Z,1527135584.034 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T04:19:44.417Z,1527135584.417 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:19:44.418Z,1527135584.418 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:19:44.418Z,1527135584.418 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:19:44.419Z,1527135584.419 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:19:44.419Z,1527135584.419 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:19:44.419Z,1527135584.419 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:20:33.621Z,1527135633.621 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T04:20:33.621Z,1527135633.621 [Default:CheckIn:C.Wait] Stopped
2018-05-24T04:20:33.622Z,1527135633.622 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T04:20:33.622Z,1527135633.622 [Default:CheckIn:D] Running Loop=1
2018-05-24T04:20:34.016Z,1527135634.016 [Default:CheckIn:D] Stopped
2018-05-24T04:20:34.016Z,1527135634.016 [Default:CheckIn:E] Running Loop=1
2018-05-24T04:20:34.416Z,1527135634.416 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 268.931299 min 
2018-05-24T04:20:34.417Z,1527135634.417 [Default:CheckIn:E] Stopped
2018-05-24T04:20:34.417Z,1527135634.417 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T04:20:34.417Z,1527135634.417 [Default:CheckIn] Stopped
2018-05-24T04:20:34.417Z,1527135634.417 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T04:20:34.417Z,1527135634.417 [Default:CheckIn](INFO): Running loop #27
2018-05-24T04:20:34.417Z,1527135634.417 [Default:CheckIn] Running Loop=27
2018-05-24T04:20:34.418Z,1527135634.418 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T04:20:34.418Z,1527135634.418 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T04:22:44.717Z,1527135764.717 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:22:44.717Z,1527135764.717 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T04:22:44.717Z,1527135764.717 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:22:44.719Z,1527135764.719 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:22:44.719Z,1527135764.719 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T04:22:44.719Z,1527135764.719 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:22:44.774Z,1527135764.774 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:22:44.774Z,1527135764.774 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:22:45.163Z,1527135765.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:22:45.163Z,1527135765.163 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T04:22:45.163Z,1527135765.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:22:45.163Z,1527135765.163 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T04:22:45.527Z,1527135765.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:22:45.527Z,1527135765.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:22:45.528Z,1527135765.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:22:45.528Z,1527135765.528 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:22:45.528Z,1527135765.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:22:45.529Z,1527135765.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:25:34.669Z,1527135934.669 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T04:20:34.4Z
2018-05-24T04:25:34.669Z,1527135934.669 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T04:25:34.669Z,1527135934.669 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T04:25:39.027Z,1527135939.027 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0082.lzma
2018-05-24T04:25:39.798Z,1527135939.798 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0082.lzma.bak
2018-05-24T04:25:39.798Z,1527135939.798 [DataOverHttps](INFO): SBD MOMSN=8291521
2018-05-24T04:25:45.548Z,1527135945.548 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:25:45.548Z,1527135945.548 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T04:25:45.548Z,1527135945.548 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:25:45.550Z,1527135945.550 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:25:45.550Z,1527135945.550 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T04:25:45.550Z,1527135945.550 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:25:45.583Z,1527135945.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:25:45.583Z,1527135945.583 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:25:48.646Z,1527135948.646 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:25:48.646Z,1527135948.646 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T04:25:48.647Z,1527135948.647 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:25:48.647Z,1527135948.647 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T04:25:48.659Z,1527135948.659 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0083.lzma
2018-05-24T04:25:48.754Z,1527135948.754 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:25:48.755Z,1527135948.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:25:48.755Z,1527135948.755 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:25:48.755Z,1527135948.755 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:25:48.756Z,1527135948.756 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:25:48.756Z,1527135948.756 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:25:49.458Z,1527135949.458 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0083.lzma.bak
2018-05-24T04:25:49.459Z,1527135949.459 [DataOverHttps](INFO): SBD MOMSN=8291523
2018-05-24T04:25:50.319Z,1527135950.319 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T04:25:50.319Z,1527135950.319 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T04:25:50.319Z,1527135950.319 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T04:28:27.166Z,1527136107.166 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T04:28:49.120Z,1527136129.120 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:28:49.120Z,1527136129.120 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T04:28:49.121Z,1527136129.121 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:28:49.122Z,1527136129.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:28:49.122Z,1527136129.122 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T04:28:49.122Z,1527136129.122 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:28:49.167Z,1527136129.167 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:28:49.167Z,1527136129.167 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:28:49.542Z,1527136129.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:28:49.542Z,1527136129.542 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T04:28:49.542Z,1527136129.542 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:28:49.542Z,1527136129.542 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T04:28:49.928Z,1527136129.928 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:28:49.928Z,1527136129.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:28:49.928Z,1527136129.928 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:28:49.929Z,1527136129.929 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:28:49.930Z,1527136129.930 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:28:49.930Z,1527136129.930 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:30:50.671Z,1527136250.671 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T04:30:50.671Z,1527136250.671 [Default:CheckIn:C.Wait] Stopped
2018-05-24T04:30:50.671Z,1527136250.671 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T04:30:50.671Z,1527136250.671 [Default:CheckIn:D] Running Loop=1
2018-05-24T04:30:51.053Z,1527136251.053 [Default:CheckIn:D] Stopped
2018-05-24T04:30:51.053Z,1527136251.053 [Default:CheckIn:E] Running Loop=1
2018-05-24T04:30:51.457Z,1527136251.457 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 279.215267 min 
2018-05-24T04:30:51.458Z,1527136251.458 [Default:CheckIn:E] Stopped
2018-05-24T04:30:51.458Z,1527136251.458 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T04:30:51.458Z,1527136251.458 [Default:CheckIn] Stopped
2018-05-24T04:30:51.458Z,1527136251.458 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T04:30:51.458Z,1527136251.458 [Default:CheckIn](INFO): Running loop #28
2018-05-24T04:30:51.458Z,1527136251.458 [Default:CheckIn] Running Loop=28
2018-05-24T04:30:51.458Z,1527136251.458 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T04:30:51.459Z,1527136251.459 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T04:31:50.232Z,1527136310.232 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:31:50.232Z,1527136310.232 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T04:31:50.232Z,1527136310.232 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:31:50.234Z,1527136310.234 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:31:50.234Z,1527136310.234 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T04:31:50.234Z,1527136310.234 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:31:50.264Z,1527136310.264 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:31:50.264Z,1527136310.264 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:31:50.635Z,1527136310.635 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:31:50.636Z,1527136310.636 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T04:31:50.636Z,1527136310.636 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:31:50.636Z,1527136310.636 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T04:31:51.028Z,1527136311.028 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:31:51.028Z,1527136311.028 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:31:51.029Z,1527136311.029 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:31:51.029Z,1527136311.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:31:51.030Z,1527136311.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:31:51.030Z,1527136311.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:34:51.361Z,1527136491.361 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:34:51.361Z,1527136491.361 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T04:34:51.361Z,1527136491.361 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:34:51.363Z,1527136491.363 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:34:51.363Z,1527136491.363 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T04:34:51.363Z,1527136491.363 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:34:51.392Z,1527136491.392 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:34:51.392Z,1527136491.392 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:34:51.397Z,1527136491.397 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:34:51.397Z,1527136491.397 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:35:51.728Z,1527136551.728 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T04:30:51.5Z
2018-05-24T04:35:51.728Z,1527136551.728 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T04:35:51.728Z,1527136551.728 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T04:35:56.196Z,1527136556.196 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0085.lzma
2018-05-24T04:35:56.986Z,1527136556.986 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0085.lzma.bak
2018-05-24T04:35:56.987Z,1527136556.987 [DataOverHttps](INFO): SBD MOMSN=8291526
2018-05-24T04:36:11.862Z,1527136571.862 [DataOverHttps](INFO): Sending 180 bytes from file Logs/20180523T234807/Express0086.lzma
2018-05-24T04:36:12.663Z,1527136572.663 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0086.lzma.bak
2018-05-24T04:36:12.663Z,1527136572.663 [DataOverHttps](INFO): SBD MOMSN=8291528
2018-05-24T04:36:13.544Z,1527136573.544 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T04:36:13.544Z,1527136573.544 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T04:36:13.544Z,1527136573.544 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T04:38:27.184Z,1527136707.184 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T04:41:13.900Z,1527136873.900 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T04:41:13.900Z,1527136873.900 [Default:CheckIn:C.Wait] Stopped
2018-05-24T04:41:13.900Z,1527136873.900 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T04:41:13.901Z,1527136873.901 [Default:CheckIn:D] Running Loop=1
2018-05-24T04:41:14.300Z,1527136874.300 [Default:CheckIn:D] Stopped
2018-05-24T04:41:14.300Z,1527136874.300 [Default:CheckIn:E] Running Loop=1
2018-05-24T04:41:14.708Z,1527136874.708 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 289.602702 min 
2018-05-24T04:41:14.710Z,1527136874.710 [Default:CheckIn:E] Stopped
2018-05-24T04:41:14.710Z,1527136874.710 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T04:41:14.710Z,1527136874.710 [Default:CheckIn] Stopped
2018-05-24T04:41:14.710Z,1527136874.710 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T04:41:14.710Z,1527136874.710 [Default:CheckIn](INFO): Running loop #29
2018-05-24T04:41:14.710Z,1527136874.710 [Default:CheckIn] Running Loop=29
2018-05-24T04:41:14.710Z,1527136874.710 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T04:41:14.710Z,1527136874.710 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T04:46:14.939Z,1527137174.939 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T04:41:14.7Z
2018-05-24T04:46:14.939Z,1527137174.939 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T04:46:14.939Z,1527137174.939 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T04:46:19.293Z,1527137179.293 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0088.lzma
2018-05-24T04:46:20.091Z,1527137180.091 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0088.lzma.bak
2018-05-24T04:46:20.091Z,1527137180.091 [DataOverHttps](INFO): SBD MOMSN=8291533
2018-05-24T04:46:29.208Z,1527137189.208 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0089.lzma
2018-05-24T04:46:30.006Z,1527137190.006 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0089.lzma.bak
2018-05-24T04:46:30.007Z,1527137190.007 [DataOverHttps](INFO): SBD MOMSN=8291535
2018-05-24T04:46:30.880Z,1527137190.880 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T04:46:30.880Z,1527137190.880 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T04:46:30.880Z,1527137190.880 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T04:48:27.286Z,1527137307.286 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T04:49:51.632Z,1527137391.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:49:51.632Z,1527137391.632 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T04:49:51.632Z,1527137391.632 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:49:51.632Z,1527137391.632 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T04:49:52.022Z,1527137392.022 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:49:52.023Z,1527137392.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:49:52.023Z,1527137392.023 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:49:52.023Z,1527137392.023 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:49:52.024Z,1527137392.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:49:52.024Z,1527137392.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:51:31.225Z,1527137491.225 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T04:51:31.226Z,1527137491.226 [Default:CheckIn:C.Wait] Stopped
2018-05-24T04:51:31.226Z,1527137491.226 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T04:51:31.226Z,1527137491.226 [Default:CheckIn:D] Running Loop=1
2018-05-24T04:51:31.619Z,1527137491.619 [Default:CheckIn:D] Stopped
2018-05-24T04:51:31.619Z,1527137491.619 [Default:CheckIn:E] Running Loop=1
2018-05-24T04:51:32.019Z,1527137492.019 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 299.891374 min 
2018-05-24T04:51:32.020Z,1527137492.020 [Default:CheckIn:E] Stopped
2018-05-24T04:51:32.020Z,1527137492.020 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T04:51:32.020Z,1527137492.020 [Default:CheckIn] Stopped
2018-05-24T04:51:32.020Z,1527137492.020 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T04:51:32.020Z,1527137492.020 [Default:CheckIn](INFO): Running loop #30
2018-05-24T04:51:32.020Z,1527137492.020 [Default:CheckIn] Running Loop=30
2018-05-24T04:51:32.020Z,1527137492.020 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T04:51:32.021Z,1527137492.021 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T04:52:52.363Z,1527137572.363 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:52:52.363Z,1527137572.363 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T04:52:52.363Z,1527137572.363 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:52:52.364Z,1527137572.364 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:52:52.365Z,1527137572.365 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T04:52:52.365Z,1527137572.365 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:52:52.396Z,1527137572.396 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:52:52.396Z,1527137572.396 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:52:52.772Z,1527137572.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:52:52.772Z,1527137572.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T04:52:52.773Z,1527137572.773 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:52:52.773Z,1527137572.773 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T04:52:53.161Z,1527137573.161 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:52:53.161Z,1527137573.161 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:52:53.162Z,1527137573.162 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:52:53.162Z,1527137573.162 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:52:53.162Z,1527137573.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:52:53.163Z,1527137573.163 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:55:53.476Z,1527137753.476 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:55:53.476Z,1527137753.476 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T04:55:53.476Z,1527137753.476 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:55:53.478Z,1527137753.478 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:55:53.478Z,1527137753.478 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T04:55:53.478Z,1527137753.478 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:55:53.516Z,1527137753.516 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:55:53.517Z,1527137753.517 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:55:53.886Z,1527137753.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:55:53.886Z,1527137753.886 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T04:55:53.886Z,1527137753.886 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:55:53.886Z,1527137753.886 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T04:55:54.268Z,1527137754.268 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:55:54.269Z,1527137754.269 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:55:54.269Z,1527137754.269 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:55:54.270Z,1527137754.270 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:55:54.270Z,1527137754.270 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:55:54.270Z,1527137754.270 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:56:32.269Z,1527137792.269 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T04:51:32.0Z
2018-05-24T04:56:32.269Z,1527137792.269 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T04:56:32.269Z,1527137792.269 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T04:56:36.773Z,1527137796.773 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0091.lzma
2018-05-24T04:56:37.544Z,1527137797.544 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0091.lzma.bak
2018-05-24T04:56:37.544Z,1527137797.544 [DataOverHttps](INFO): SBD MOMSN=8291538
2018-05-24T04:56:46.420Z,1527137806.420 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0092.lzma
2018-05-24T04:56:47.222Z,1527137807.222 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0092.lzma.bak
2018-05-24T04:56:47.223Z,1527137807.223 [DataOverHttps](INFO): SBD MOMSN=8291540
2018-05-24T04:56:48.097Z,1527137808.097 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T04:56:48.097Z,1527137808.097 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T04:56:48.097Z,1527137808.097 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T04:58:27.316Z,1527137907.316 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T04:58:54.512Z,1527137934.512 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:58:54.512Z,1527137934.512 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T04:58:54.513Z,1527137934.513 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T04:58:54.514Z,1527137934.514 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T04:58:54.515Z,1527137934.515 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T04:58:54.515Z,1527137934.515 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T04:58:54.538Z,1527137934.538 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T04:58:54.539Z,1527137934.539 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T04:58:54.924Z,1527137934.924 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T04:58:54.924Z,1527137934.924 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T04:58:54.924Z,1527137934.924 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T04:58:54.924Z,1527137934.924 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T04:58:55.311Z,1527137935.311 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T04:58:55.311Z,1527137935.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:58:55.311Z,1527137935.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T04:58:55.312Z,1527137935.312 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T04:58:55.312Z,1527137935.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T04:58:55.312Z,1527137935.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:01:48.457Z,1527138108.457 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T05:01:48.457Z,1527138108.457 [Default:CheckIn:C.Wait] Stopped
2018-05-24T05:01:48.457Z,1527138108.457 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T05:01:48.458Z,1527138108.457 [Default:CheckIn:D] Running Loop=1
2018-05-24T05:01:48.858Z,1527138108.858 [Default:CheckIn:D] Stopped
2018-05-24T05:01:48.858Z,1527138108.858 [Default:CheckIn:E] Running Loop=1
2018-05-24T05:01:49.262Z,1527138109.262 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 310.178678 min 
2018-05-24T05:01:49.262Z,1527138109.262 [Default:CheckIn:E] Stopped
2018-05-24T05:01:49.262Z,1527138109.262 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T05:01:49.262Z,1527138109.262 [Default:CheckIn] Stopped
2018-05-24T05:01:49.262Z,1527138109.262 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T05:01:49.262Z,1527138109.262 [Default:CheckIn](INFO): Running loop #31
2018-05-24T05:01:49.263Z,1527138109.263 [Default:CheckIn] Running Loop=31
2018-05-24T05:01:49.263Z,1527138109.263 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T05:01:49.263Z,1527138109.263 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T05:01:55.633Z,1527138115.633 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:01:55.634Z,1527138115.634 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T05:01:55.634Z,1527138115.634 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:01:55.635Z,1527138115.635 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:01:55.635Z,1527138115.635 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T05:01:55.635Z,1527138115.635 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:01:55.667Z,1527138115.667 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:01:55.667Z,1527138115.667 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:01:56.058Z,1527138116.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:01:56.058Z,1527138116.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T05:01:56.058Z,1527138116.058 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:01:56.058Z,1527138116.058 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T05:01:56.438Z,1527138116.438 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:01:56.438Z,1527138116.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:01:56.438Z,1527138116.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:01:56.439Z,1527138116.439 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:01:56.439Z,1527138116.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:01:56.440Z,1527138116.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:04:56.517Z,1527138296.517 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:04:56.517Z,1527138296.517 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T05:04:56.517Z,1527138296.517 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:04:56.519Z,1527138296.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:04:56.519Z,1527138296.519 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T05:04:56.519Z,1527138296.519 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:04:56.531Z,1527138296.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:04:56.531Z,1527138296.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:04:56.943Z,1527138296.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:04:56.943Z,1527138296.943 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T05:04:56.944Z,1527138296.944 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:04:56.944Z,1527138296.944 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T05:04:57.326Z,1527138297.326 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:04:57.327Z,1527138297.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:04:57.327Z,1527138297.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:04:57.327Z,1527138297.327 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:04:57.328Z,1527138297.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:04:57.328Z,1527138297.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:06:49.284Z,1527138409.284 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T05:01:49.3Z
2018-05-24T05:06:49.284Z,1527138409.284 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T05:06:49.284Z,1527138409.284 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T05:06:53.637Z,1527138413.637 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0094.lzma
2018-05-24T05:06:54.414Z,1527138414.414 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0094.lzma.bak
2018-05-24T05:06:54.414Z,1527138414.414 [DataOverHttps](INFO): SBD MOMSN=8291543
2018-05-24T05:07:03.264Z,1527138423.264 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0095.lzma
2018-05-24T05:07:04.054Z,1527138424.054 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0095.lzma.bak
2018-05-24T05:07:04.055Z,1527138424.055 [DataOverHttps](INFO): SBD MOMSN=8291545
2018-05-24T05:07:04.921Z,1527138424.921 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T05:07:04.921Z,1527138424.921 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T05:07:04.921Z,1527138424.921 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T05:07:57.371Z,1527138477.371 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:07:57.371Z,1527138477.371 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T05:07:57.371Z,1527138477.371 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:07:57.372Z,1527138477.372 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:07:57.373Z,1527138477.373 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T05:07:57.373Z,1527138477.373 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:07:57.401Z,1527138477.401 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:07:57.401Z,1527138477.401 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:07:57.782Z,1527138477.782 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:07:57.782Z,1527138477.782 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T05:07:57.783Z,1527138477.783 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:07:57.783Z,1527138477.783 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T05:07:58.171Z,1527138478.171 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:07:58.172Z,1527138478.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:07:58.172Z,1527138478.172 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:07:58.172Z,1527138478.172 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:07:58.173Z,1527138478.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:07:58.173Z,1527138478.173 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:08:27.350Z,1527138507.350 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T05:10:58.516Z,1527138658.516 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:10:58.516Z,1527138658.516 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T05:10:58.516Z,1527138658.516 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:10:58.518Z,1527138658.518 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:10:58.518Z,1527138658.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T05:10:58.518Z,1527138658.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:10:58.530Z,1527138658.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:10:58.531Z,1527138658.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:10:58.926Z,1527138658.926 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:10:58.926Z,1527138658.926 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T05:10:58.926Z,1527138658.926 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:10:58.926Z,1527138658.926 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T05:10:59.310Z,1527138659.310 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:10:59.310Z,1527138659.310 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:10:59.311Z,1527138659.311 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:10:59.311Z,1527138659.311 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:10:59.311Z,1527138659.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:10:59.312Z,1527138659.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:12:05.285Z,1527138725.285 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T05:12:05.286Z,1527138725.286 [Default:CheckIn:C.Wait] Stopped
2018-05-24T05:12:05.286Z,1527138725.286 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T05:12:05.286Z,1527138725.286 [Default:CheckIn:D] Running Loop=1
2018-05-24T05:12:05.679Z,1527138725.679 [Default:CheckIn:D] Stopped
2018-05-24T05:12:05.679Z,1527138725.679 [Default:CheckIn:E] Running Loop=1
2018-05-24T05:12:06.080Z,1527138726.080 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 320.459017 min 
2018-05-24T05:12:06.080Z,1527138726.080 [Default:CheckIn:E] Stopped
2018-05-24T05:12:06.080Z,1527138726.080 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T05:12:06.080Z,1527138726.080 [Default:CheckIn] Stopped
2018-05-24T05:12:06.081Z,1527138726.081 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T05:12:06.081Z,1527138726.081 [Default:CheckIn](INFO): Running loop #32
2018-05-24T05:12:06.081Z,1527138726.081 [Default:CheckIn] Running Loop=32
2018-05-24T05:12:06.081Z,1527138726.081 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T05:12:06.081Z,1527138726.081 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T05:13:59.641Z,1527138839.641 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:13:59.641Z,1527138839.641 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T05:13:59.641Z,1527138839.641 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:13:59.643Z,1527138839.643 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:13:59.643Z,1527138839.643 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T05:13:59.643Z,1527138839.643 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:13:59.655Z,1527138839.655 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:13:59.655Z,1527138839.655 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:14:00.060Z,1527138840.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:14:00.060Z,1527138840.060 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T05:14:00.061Z,1527138840.061 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:14:00.061Z,1527138840.061 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T05:14:00.447Z,1527138840.447 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:14:00.447Z,1527138840.447 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:14:00.448Z,1527138840.448 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:14:00.448Z,1527138840.448 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:14:00.448Z,1527138840.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:14:00.449Z,1527138840.449 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:17:00.448Z,1527139020.448 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:17:00.448Z,1527139020.448 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T05:17:00.448Z,1527139020.448 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:17:00.450Z,1527139020.450 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:17:00.450Z,1527139020.450 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T05:17:00.450Z,1527139020.450 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:17:00.461Z,1527139020.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:17:00.462Z,1527139020.462 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:17:00.856Z,1527139020.856 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:17:00.857Z,1527139020.857 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T05:17:00.857Z,1527139020.857 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:17:00.857Z,1527139020.857 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T05:17:01.242Z,1527139021.242 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:17:01.243Z,1527139021.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:17:01.243Z,1527139021.243 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:17:01.243Z,1527139021.243 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:17:01.244Z,1527139021.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:17:01.244Z,1527139021.244 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:17:06.439Z,1527139026.439 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T05:12:06.1Z
2018-05-24T05:17:06.439Z,1527139026.439 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T05:17:06.439Z,1527139026.439 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T05:17:10.791Z,1527139030.791 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0097.lzma
2018-05-24T05:17:11.808Z,1527139031.808 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0097.lzma.bak
2018-05-24T05:17:11.809Z,1527139031.809 [DataOverHttps](INFO): SBD MOMSN=8291548
2018-05-24T05:17:20.416Z,1527139040.416 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0098.lzma
2018-05-24T05:17:21.210Z,1527139041.210 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0098.lzma.bak
2018-05-24T05:17:21.211Z,1527139041.211 [DataOverHttps](INFO): SBD MOMSN=8291550
2018-05-24T05:17:22.093Z,1527139042.093 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T05:17:22.093Z,1527139042.093 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T05:17:22.093Z,1527139042.093 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T05:18:27.364Z,1527139107.364 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T05:20:01.305Z,1527139201.305 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:20:01.305Z,1527139201.305 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T05:20:01.305Z,1527139201.305 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:20:01.306Z,1527139201.306 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:20:01.307Z,1527139201.307 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T05:20:01.307Z,1527139201.307 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:20:01.319Z,1527139201.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:20:01.319Z,1527139201.319 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:20:01.718Z,1527139201.718 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:20:01.718Z,1527139201.718 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T05:20:01.719Z,1527139201.719 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:20:01.719Z,1527139201.719 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T05:20:02.103Z,1527139202.103 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:20:02.104Z,1527139202.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:20:02.104Z,1527139202.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:20:02.105Z,1527139202.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:20:02.105Z,1527139202.105 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:20:02.106Z,1527139202.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:22:22.447Z,1527139342.447 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T05:22:22.447Z,1527139342.447 [Default:CheckIn:C.Wait] Stopped
2018-05-24T05:22:22.447Z,1527139342.447 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T05:22:22.447Z,1527139342.447 [Default:CheckIn:D] Running Loop=1
2018-05-24T05:22:22.855Z,1527139342.855 [Default:CheckIn:D] Stopped
2018-05-24T05:22:22.855Z,1527139342.855 [Default:CheckIn:E] Running Loop=1
2018-05-24T05:22:23.246Z,1527139343.246 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 330.745280 min 
2018-05-24T05:22:23.246Z,1527139343.246 [Default:CheckIn:E] Stopped
2018-05-24T05:22:23.247Z,1527139343.247 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T05:22:23.247Z,1527139343.247 [Default:CheckIn] Stopped
2018-05-24T05:22:23.247Z,1527139343.247 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T05:22:23.247Z,1527139343.247 [Default:CheckIn](INFO): Running loop #33
2018-05-24T05:22:23.247Z,1527139343.247 [Default:CheckIn] Running Loop=33
2018-05-24T05:22:23.247Z,1527139343.247 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T05:22:23.247Z,1527139343.247 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T05:23:02.416Z,1527139382.416 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:23:02.416Z,1527139382.416 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T05:23:02.416Z,1527139382.416 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:23:02.418Z,1527139382.418 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:23:02.418Z,1527139382.418 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T05:23:02.418Z,1527139382.418 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:23:02.485Z,1527139382.485 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:23:02.485Z,1527139382.485 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:23:02.820Z,1527139382.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:23:02.820Z,1527139382.820 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T05:23:02.820Z,1527139382.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:23:02.820Z,1527139382.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T05:23:03.212Z,1527139383.212 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:23:03.212Z,1527139383.212 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:23:03.213Z,1527139383.213 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:23:03.213Z,1527139383.213 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:23:03.214Z,1527139383.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:23:03.214Z,1527139383.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:26:03.580Z,1527139563.580 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:26:03.580Z,1527139563.580 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T05:26:03.580Z,1527139563.580 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:26:03.582Z,1527139563.582 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:26:03.582Z,1527139563.582 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T05:26:03.582Z,1527139563.582 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:26:03.645Z,1527139563.645 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:26:03.645Z,1527139563.645 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:26:03.988Z,1527139563.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:26:03.988Z,1527139563.988 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T05:26:03.988Z,1527139563.988 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:26:03.988Z,1527139563.988 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T05:26:04.436Z,1527139564.436 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:26:04.437Z,1527139564.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:26:04.437Z,1527139564.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:26:04.437Z,1527139564.437 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:26:04.438Z,1527139564.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:26:04.438Z,1527139564.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:27:23.563Z,1527139643.563 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T05:22:23.2Z
2018-05-24T05:27:23.563Z,1527139643.563 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T05:27:23.563Z,1527139643.563 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T05:27:27.902Z,1527139647.902 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0100.lzma
2018-05-24T05:27:28.683Z,1527139648.683 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0100.lzma.bak
2018-05-24T05:27:28.683Z,1527139648.683 [DataOverHttps](INFO): SBD MOMSN=8291553
2018-05-24T05:27:38.019Z,1527139658.019 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0101.lzma
2018-05-24T05:27:38.784Z,1527139658.784 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0101.lzma.bak
2018-05-24T05:27:38.784Z,1527139658.784 [DataOverHttps](INFO): SBD MOMSN=8291555
2018-05-24T05:27:39.654Z,1527139659.654 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T05:27:39.654Z,1527139659.654 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T05:27:39.654Z,1527139659.654 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T05:28:27.747Z,1527139707.747 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T05:29:04.497Z,1527139744.497 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:29:04.497Z,1527139744.497 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T05:29:04.497Z,1527139744.497 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:29:04.499Z,1527139744.499 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:29:04.499Z,1527139744.499 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T05:29:04.499Z,1527139744.499 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:29:04.511Z,1527139744.511 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:29:04.511Z,1527139744.511 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:29:04.912Z,1527139744.912 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:29:04.912Z,1527139744.912 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T05:29:04.912Z,1527139744.912 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:29:04.912Z,1527139744.912 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T05:29:05.307Z,1527139745.307 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:29:05.307Z,1527139745.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:29:05.308Z,1527139745.308 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:29:05.308Z,1527139745.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:29:05.309Z,1527139745.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:29:05.309Z,1527139745.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:32:05.643Z,1527139925.643 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:32:05.643Z,1527139925.643 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T05:32:05.644Z,1527139925.644 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:32:05.646Z,1527139925.646 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:32:05.646Z,1527139925.646 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T05:32:05.646Z,1527139925.646 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:32:05.657Z,1527139925.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:32:05.658Z,1527139925.658 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:32:06.054Z,1527139926.054 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:32:06.054Z,1527139926.054 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T05:32:06.054Z,1527139926.054 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:32:06.054Z,1527139926.054 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T05:32:06.451Z,1527139926.451 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:32:06.451Z,1527139926.451 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:32:06.452Z,1527139926.452 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:32:06.452Z,1527139926.452 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:32:06.452Z,1527139926.452 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:32:06.453Z,1527139926.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:32:40.049Z,1527139960.049 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T05:32:40.049Z,1527139960.049 [Default:CheckIn:C.Wait] Stopped
2018-05-24T05:32:40.050Z,1527139960.050 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T05:32:40.050Z,1527139960.050 [Default:CheckIn:D] Running Loop=1
2018-05-24T05:32:40.443Z,1527139960.443 [Default:CheckIn:D] Stopped
2018-05-24T05:32:40.443Z,1527139960.443 [Default:CheckIn:E] Running Loop=1
2018-05-24T05:32:40.843Z,1527139960.843 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 341.038411 min 
2018-05-24T05:32:40.843Z,1527139960.843 [Default:CheckIn:E] Stopped
2018-05-24T05:32:40.843Z,1527139960.843 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T05:32:40.843Z,1527139960.843 [Default:CheckIn] Stopped
2018-05-24T05:32:40.844Z,1527139960.844 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T05:32:40.844Z,1527139960.844 [Default:CheckIn](INFO): Running loop #34
2018-05-24T05:32:40.844Z,1527139960.844 [Default:CheckIn] Running Loop=34
2018-05-24T05:32:40.844Z,1527139960.844 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T05:32:40.844Z,1527139960.844 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T05:35:06.784Z,1527140106.784 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:35:06.784Z,1527140106.784 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T05:35:06.784Z,1527140106.784 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:35:06.786Z,1527140106.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:35:06.786Z,1527140106.786 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T05:35:06.786Z,1527140106.786 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:35:06.798Z,1527140106.798 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:35:06.798Z,1527140106.798 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:35:07.197Z,1527140107.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:35:07.197Z,1527140107.197 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T05:35:07.198Z,1527140107.198 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:35:07.198Z,1527140107.198 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T05:35:07.595Z,1527140107.595 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:35:07.595Z,1527140107.595 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:35:07.596Z,1527140107.596 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:35:07.596Z,1527140107.596 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:35:07.596Z,1527140107.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:35:07.597Z,1527140107.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:37:41.151Z,1527140261.151 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T05:32:40.8Z
2018-05-24T05:37:41.151Z,1527140261.151 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T05:37:41.151Z,1527140261.151 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T05:37:45.502Z,1527140265.502 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0103.lzma
2018-05-24T05:37:46.271Z,1527140266.271 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0103.lzma.bak
2018-05-24T05:37:46.271Z,1527140266.271 [DataOverHttps](INFO): SBD MOMSN=8291558
2018-05-24T05:37:55.220Z,1527140275.220 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0104.lzma
2018-05-24T05:37:56.014Z,1527140276.014 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0104.lzma.bak
2018-05-24T05:37:56.015Z,1527140276.015 [DataOverHttps](INFO): SBD MOMSN=8291560
2018-05-24T05:37:56.896Z,1527140276.896 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T05:37:56.896Z,1527140276.896 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T05:37:56.896Z,1527140276.896 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T05:38:07.736Z,1527140287.736 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:38:07.736Z,1527140287.736 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T05:38:07.736Z,1527140287.736 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:38:07.738Z,1527140287.738 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:38:07.738Z,1527140287.738 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T05:38:07.738Z,1527140287.738 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:38:07.750Z,1527140287.750 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:38:07.750Z,1527140287.750 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:38:08.154Z,1527140288.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:38:08.154Z,1527140288.154 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T05:38:08.154Z,1527140288.154 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:38:08.154Z,1527140288.154 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T05:38:08.533Z,1527140288.533 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:38:08.534Z,1527140288.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:38:08.534Z,1527140288.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:38:08.535Z,1527140288.535 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:38:08.535Z,1527140288.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:38:08.535Z,1527140288.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:38:27.748Z,1527140307.748 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T05:41:08.856Z,1527140468.856 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:41:08.856Z,1527140468.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T05:41:08.856Z,1527140468.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:41:08.858Z,1527140468.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:41:08.859Z,1527140468.859 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T05:41:08.859Z,1527140468.859 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:41:08.870Z,1527140468.870 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:41:08.871Z,1527140468.871 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:41:09.265Z,1527140469.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:41:09.265Z,1527140469.265 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T05:41:09.265Z,1527140469.265 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:41:09.266Z,1527140469.266 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T05:41:09.653Z,1527140469.653 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:41:09.654Z,1527140469.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:41:09.654Z,1527140469.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:41:09.654Z,1527140469.654 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:41:09.655Z,1527140469.655 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:41:09.655Z,1527140469.655 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:42:57.225Z,1527140577.225 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T05:42:57.225Z,1527140577.225 [Default:CheckIn:C.Wait] Stopped
2018-05-24T05:42:57.226Z,1527140577.226 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T05:42:57.226Z,1527140577.226 [Default:CheckIn:D] Running Loop=1
2018-05-24T05:42:57.625Z,1527140577.625 [Default:CheckIn:D] Stopped
2018-05-24T05:42:57.626Z,1527140577.626 [Default:CheckIn:E] Running Loop=1
2018-05-24T05:42:58.019Z,1527140578.019 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 351.324805 min 
2018-05-24T05:42:58.019Z,1527140578.019 [Default:CheckIn:E] Stopped
2018-05-24T05:42:58.019Z,1527140578.019 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T05:42:58.019Z,1527140578.019 [Default:CheckIn] Stopped
2018-05-24T05:42:58.019Z,1527140578.019 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T05:42:58.020Z,1527140578.020 [Default:CheckIn](INFO): Running loop #35
2018-05-24T05:42:58.020Z,1527140578.020 [Default:CheckIn] Running Loop=35
2018-05-24T05:42:58.020Z,1527140578.020 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T05:42:58.020Z,1527140578.020 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T05:44:09.988Z,1527140649.988 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:44:09.988Z,1527140649.988 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T05:44:09.988Z,1527140649.988 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:44:09.990Z,1527140649.990 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:44:09.990Z,1527140649.990 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T05:44:09.990Z,1527140649.990 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:44:10.002Z,1527140650.002 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:44:10.002Z,1527140650.002 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:44:10.392Z,1527140650.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:44:10.392Z,1527140650.392 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T05:44:10.393Z,1527140650.393 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:44:10.393Z,1527140650.393 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T05:44:10.780Z,1527140650.780 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:44:10.780Z,1527140650.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:44:10.781Z,1527140650.781 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:44:10.781Z,1527140650.781 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:44:10.782Z,1527140650.782 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:44:10.782Z,1527140650.782 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:47:10.811Z,1527140830.811 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:47:10.811Z,1527140830.811 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T05:47:10.811Z,1527140830.811 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:47:10.812Z,1527140830.812 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:47:10.812Z,1527140830.812 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T05:47:10.813Z,1527140830.813 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:47:10.856Z,1527140830.856 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:47:10.857Z,1527140830.857 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:47:11.223Z,1527140831.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T05:47:11.223Z,1527140831.223 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T05:47:11.224Z,1527140831.224 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T05:47:11.224Z,1527140831.224 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T05:47:11.608Z,1527140831.608 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T05:47:11.610Z,1527140831.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:47:11.610Z,1527140831.610 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:47:11.610Z,1527140831.610 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T05:47:11.611Z,1527140831.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T05:47:11.611Z,1527140831.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T05:47:58.411Z,1527140878.411 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T05:42:58.0Z
2018-05-24T05:47:58.411Z,1527140878.411 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T05:47:58.411Z,1527140878.411 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T05:48:02.732Z,1527140882.732 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0106.lzma
2018-05-24T05:48:03.535Z,1527140883.535 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0106.lzma.bak
2018-05-24T05:48:03.535Z,1527140883.535 [DataOverHttps](INFO): SBD MOMSN=8291563
2018-05-24T05:48:12.482Z,1527140892.482 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0107.lzma
2018-05-24T05:48:13.251Z,1527140893.251 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0107.lzma.bak
2018-05-24T05:48:13.251Z,1527140893.251 [DataOverHttps](INFO): SBD MOMSN=8291565
2018-05-24T05:48:14.125Z,1527140894.125 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T05:48:14.125Z,1527140894.125 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T05:48:14.125Z,1527140894.125 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T05:48:27.766Z,1527140907.766 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T05:48:52.961Z,1527140932.961 [CBIT](IMPORTANT): Beginning ground fault scan
2018-05-24T05:49:03.763Z,1527140943.763 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134760
CHAN A1 (24V): -0.003638
CHAN A2 (12V): -0.002341
CHAN A3 (5V): -0.001453
CHAN B0 (3.3V): -0.000274
CHAN B1 (3.15aV): -0.000707
CHAN B2 (3.15bV): -0.000602
CHAN B3 (GND): 0.000090
OPEN: -0.000258
Full Scale Calc: 4.765 mA, -1.589 mA
2018-05-24T05:50:11.740Z,1527141011.740 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:50:11.740Z,1527141011.740 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T05:50:11.740Z,1527141011.740 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T05:50:11.742Z,1527141011.742 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T05:50:11.742Z,1527141011.742 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T05:50:11.742Z,1527141011.742 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T05:50:11.754Z,1527141011.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:50:11.754Z,1527141011.754 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T05:50:11.755Z,1527141011.755 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:50:11.755Z,1527141011.755 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T05:53:14.525Z,1527141194.525 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T05:53:14.526Z,1527141194.526 [Default:CheckIn:C.Wait] Stopped
2018-05-24T05:53:14.526Z,1527141194.526 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T05:53:14.526Z,1527141194.526 [Default:CheckIn:D] Running Loop=1
2018-05-24T05:53:14.929Z,1527141194.929 [Default:CheckIn:D] Stopped
2018-05-24T05:53:14.929Z,1527141194.929 [Default:CheckIn:E] Running Loop=1
2018-05-24T05:53:15.330Z,1527141195.330 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 361.613184 min 
2018-05-24T05:53:15.330Z,1527141195.330 [Default:CheckIn:E] Stopped
2018-05-24T05:53:15.330Z,1527141195.330 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T05:53:15.330Z,1527141195.330 [Default:CheckIn] Stopped
2018-05-24T05:53:15.330Z,1527141195.330 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T05:53:15.331Z,1527141195.331 [Default:CheckIn](INFO): Running loop #36
2018-05-24T05:53:15.331Z,1527141195.331 [Default:CheckIn] Running Loop=36
2018-05-24T05:53:15.331Z,1527141195.331 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T05:53:15.331Z,1527141195.331 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T05:58:15.704Z,1527141495.704 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T05:53:15.3Z
2018-05-24T05:58:15.705Z,1527141495.705 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T05:58:15.705Z,1527141495.705 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T05:58:20.054Z,1527141500.054 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180523T234807/Courier0109.lzma
2018-05-24T05:58:20.822Z,1527141500.822 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0109.lzma.bak
2018-05-24T05:58:20.823Z,1527141500.823 [DataOverHttps](INFO): SBD MOMSN=8291568
2018-05-24T05:58:29.663Z,1527141509.663 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T05:58:29.673Z,1527141509.673 [DataOverHttps](INFO): Sending 363 bytes from file Logs/20180523T234807/Express0110.lzma
2018-05-24T05:58:30.474Z,1527141510.474 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0110.lzma.bak
2018-05-24T05:58:30.475Z,1527141510.475 [DataOverHttps](INFO): SBD MOMSN=8291570
2018-05-24T05:58:31.333Z,1527141511.333 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T05:58:31.333Z,1527141511.333 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T05:58:31.333Z,1527141511.333 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T06:03:31.704Z,1527141811.704 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T06:03:31.704Z,1527141811.704 [Default:CheckIn:C.Wait] Stopped
2018-05-24T06:03:31.704Z,1527141811.704 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T06:03:31.704Z,1527141811.704 [Default:CheckIn:D] Running Loop=1
2018-05-24T06:03:32.097Z,1527141812.097 [Default:CheckIn:D] Stopped
2018-05-24T06:03:32.097Z,1527141812.097 [Default:CheckIn:E] Running Loop=1
2018-05-24T06:03:32.498Z,1527141812.498 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 371.899316 min 
2018-05-24T06:03:32.498Z,1527141812.498 [Default:CheckIn:E] Stopped
2018-05-24T06:03:32.498Z,1527141812.498 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T06:03:32.498Z,1527141812.498 [Default:CheckIn] Stopped
2018-05-24T06:03:32.498Z,1527141812.498 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T06:03:32.498Z,1527141812.498 [Default:CheckIn](INFO): Running loop #37
2018-05-24T06:03:32.498Z,1527141812.498 [Default:CheckIn] Running Loop=37
2018-05-24T06:03:32.499Z,1527141812.499 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T06:03:32.499Z,1527141812.499 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T06:05:12.081Z,1527141912.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:05:12.081Z,1527141912.081 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T06:05:12.081Z,1527141912.081 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:05:12.082Z,1527141912.082 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T06:05:12.462Z,1527141912.462 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:05:12.462Z,1527141912.462 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:05:12.463Z,1527141912.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:05:12.463Z,1527141912.463 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:05:12.463Z,1527141912.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:05:12.464Z,1527141912.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:08:12.583Z,1527142092.583 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:08:12.584Z,1527142092.584 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T06:08:12.584Z,1527142092.584 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:08:12.586Z,1527142092.586 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:08:12.586Z,1527142092.586 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T06:08:12.587Z,1527142092.587 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:08:12.600Z,1527142092.600 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:08:12.600Z,1527142092.600 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:08:13.005Z,1527142093.005 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:08:13.005Z,1527142093.005 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T06:08:13.006Z,1527142093.006 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:08:13.006Z,1527142093.006 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T06:08:13.394Z,1527142093.394 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:08:13.395Z,1527142093.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:08:13.395Z,1527142093.395 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:08:13.395Z,1527142093.395 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:08:13.396Z,1527142093.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:08:13.396Z,1527142093.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:08:29.786Z,1527142109.786 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T06:08:32.582Z,1527142112.582 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T06:03:32.5Z
2018-05-24T06:08:32.582Z,1527142112.582 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T06:08:32.582Z,1527142112.582 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T06:08:36.986Z,1527142116.986 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0112.lzma
2018-05-24T06:08:37.786Z,1527142117.786 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0112.lzma.bak
2018-05-24T06:08:37.787Z,1527142117.787 [DataOverHttps](INFO): SBD MOMSN=8291577
2018-05-24T06:08:47.085Z,1527142127.085 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0113.lzma
2018-05-24T06:08:47.862Z,1527142127.862 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0113.lzma.bak
2018-05-24T06:08:47.863Z,1527142127.863 [DataOverHttps](INFO): SBD MOMSN=8291579
2018-05-24T06:08:48.743Z,1527142128.743 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T06:08:48.743Z,1527142128.743 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T06:08:48.743Z,1527142128.743 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T06:11:13.540Z,1527142273.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:11:13.540Z,1527142273.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T06:11:13.540Z,1527142273.540 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:11:13.542Z,1527142273.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:11:13.542Z,1527142273.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T06:11:13.542Z,1527142273.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:11:13.578Z,1527142273.578 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:11:13.578Z,1527142273.578 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:11:13.947Z,1527142273.947 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:11:13.947Z,1527142273.947 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T06:11:13.948Z,1527142273.948 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:11:13.948Z,1527142273.948 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T06:11:14.338Z,1527142274.338 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:11:14.339Z,1527142274.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:11:14.339Z,1527142274.339 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:11:14.340Z,1527142274.340 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:11:14.340Z,1527142274.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:11:14.340Z,1527142274.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:13:49.101Z,1527142429.101 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T06:13:49.102Z,1527142429.102 [Default:CheckIn:C.Wait] Stopped
2018-05-24T06:13:49.102Z,1527142429.102 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T06:13:49.102Z,1527142429.102 [Default:CheckIn:D] Running Loop=1
2018-05-24T06:13:49.499Z,1527142429.499 [Default:CheckIn:D] Stopped
2018-05-24T06:13:49.499Z,1527142429.499 [Default:CheckIn:E] Running Loop=1
2018-05-24T06:13:49.902Z,1527142429.902 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 382.189355 min 
2018-05-24T06:13:49.902Z,1527142429.902 [Default:CheckIn:E] Stopped
2018-05-24T06:13:49.902Z,1527142429.902 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T06:13:49.903Z,1527142429.903 [Default:CheckIn] Stopped
2018-05-24T06:13:49.903Z,1527142429.903 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T06:13:49.903Z,1527142429.903 [Default:CheckIn](INFO): Running loop #38
2018-05-24T06:13:49.903Z,1527142429.903 [Default:CheckIn] Running Loop=38
2018-05-24T06:13:49.903Z,1527142429.903 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T06:13:49.903Z,1527142429.903 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T06:14:14.739Z,1527142454.739 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:14:14.739Z,1527142454.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T06:14:14.739Z,1527142454.739 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:14:14.741Z,1527142454.741 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:14:14.741Z,1527142454.741 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T06:14:14.741Z,1527142454.741 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:14:14.794Z,1527142454.794 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:14:14.794Z,1527142454.794 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:14:15.185Z,1527142455.185 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:14:15.185Z,1527142455.185 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T06:14:15.186Z,1527142455.186 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:14:15.186Z,1527142455.186 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T06:14:15.541Z,1527142455.541 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:14:15.541Z,1527142455.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:14:15.542Z,1527142455.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:14:15.542Z,1527142455.542 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:14:15.542Z,1527142455.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:14:15.543Z,1527142455.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:17:15.887Z,1527142635.887 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:17:15.887Z,1527142635.887 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T06:17:15.887Z,1527142635.887 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:17:15.889Z,1527142635.889 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:17:15.889Z,1527142635.889 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T06:17:15.889Z,1527142635.889 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:17:15.929Z,1527142635.929 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:17:15.929Z,1527142635.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:17:16.300Z,1527142636.300 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:17:16.300Z,1527142636.300 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T06:17:16.317Z,1527142636.317 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:17:16.317Z,1527142636.317 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T06:17:16.691Z,1527142636.691 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:17:16.691Z,1527142636.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:17:16.692Z,1527142636.692 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:17:16.692Z,1527142636.692 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:17:16.692Z,1527142636.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:17:16.693Z,1527142636.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:18:29.903Z,1527142709.903 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T06:18:50.276Z,1527142730.276 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T06:13:49.9Z
2018-05-24T06:18:50.276Z,1527142730.276 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T06:18:50.276Z,1527142730.276 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T06:18:54.631Z,1527142734.631 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0115.lzma
2018-05-24T06:18:55.431Z,1527142735.431 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0115.lzma.bak
2018-05-24T06:18:55.432Z,1527142735.432 [DataOverHttps](INFO): SBD MOMSN=8291582
2018-05-24T06:19:04.303Z,1527142744.303 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0116.lzma
2018-05-24T06:19:05.098Z,1527142745.098 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0116.lzma.bak
2018-05-24T06:19:05.099Z,1527142745.099 [DataOverHttps](INFO): SBD MOMSN=8291584
2018-05-24T06:19:05.979Z,1527142745.979 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T06:19:05.979Z,1527142745.979 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T06:19:05.979Z,1527142745.979 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T06:20:16.783Z,1527142816.783 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:20:16.783Z,1527142816.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T06:20:16.783Z,1527142816.783 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:20:16.785Z,1527142816.785 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:20:16.785Z,1527142816.785 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T06:20:16.785Z,1527142816.785 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:20:16.813Z,1527142816.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:20:16.814Z,1527142816.814 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:20:17.230Z,1527142817.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:20:17.230Z,1527142817.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T06:20:17.230Z,1527142817.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:20:17.231Z,1527142817.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T06:20:17.584Z,1527142817.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:20:17.585Z,1527142817.585 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:20:17.585Z,1527142817.585 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:20:17.586Z,1527142817.586 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:20:17.586Z,1527142817.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:20:17.587Z,1527142817.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:23:17.894Z,1527142997.894 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:23:17.894Z,1527142997.894 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T06:23:17.894Z,1527142997.894 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:23:17.896Z,1527142997.896 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:23:17.896Z,1527142997.896 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T06:23:17.896Z,1527142997.896 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:23:17.924Z,1527142997.924 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:23:17.924Z,1527142997.924 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:23:18.333Z,1527142998.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:23:18.333Z,1527142998.333 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T06:23:18.334Z,1527142998.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:23:18.334Z,1527142998.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T06:23:18.695Z,1527142998.695 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:23:18.696Z,1527142998.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:23:18.696Z,1527142998.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:23:18.696Z,1527142998.696 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:23:18.697Z,1527142998.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:23:18.697Z,1527142998.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:24:06.301Z,1527143046.301 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T06:24:06.301Z,1527143046.301 [Default:CheckIn:C.Wait] Stopped
2018-05-24T06:24:06.302Z,1527143046.302 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T06:24:06.302Z,1527143046.302 [Default:CheckIn:D] Running Loop=1
2018-05-24T06:24:06.708Z,1527143046.708 [Default:CheckIn:D] Stopped
2018-05-24T06:24:06.708Z,1527143046.708 [Default:CheckIn:E] Running Loop=1
2018-05-24T06:24:07.106Z,1527143047.106 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 392.476172 min 
2018-05-24T06:24:07.106Z,1527143047.106 [Default:CheckIn:E] Stopped
2018-05-24T06:24:07.106Z,1527143047.106 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T06:24:07.106Z,1527143047.106 [Default:CheckIn] Stopped
2018-05-24T06:24:07.107Z,1527143047.107 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T06:24:07.107Z,1527143047.107 [Default:CheckIn](INFO): Running loop #39
2018-05-24T06:24:07.107Z,1527143047.107 [Default:CheckIn] Running Loop=39
2018-05-24T06:24:07.107Z,1527143047.107 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T06:24:07.107Z,1527143047.107 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T06:26:19.054Z,1527143179.054 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:26:19.055Z,1527143179.055 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T06:26:19.055Z,1527143179.055 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:26:19.056Z,1527143179.056 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:26:19.056Z,1527143179.056 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T06:26:19.056Z,1527143179.056 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:26:19.068Z,1527143179.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:26:19.085Z,1527143179.085 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:26:19.470Z,1527143179.470 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:26:19.470Z,1527143179.470 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T06:26:19.470Z,1527143179.470 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:26:19.470Z,1527143179.470 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T06:26:19.855Z,1527143179.855 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:26:19.856Z,1527143179.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:26:19.856Z,1527143179.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:26:19.856Z,1527143179.856 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:26:19.857Z,1527143179.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:26:19.857Z,1527143179.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:28:30.231Z,1527143310.231 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T06:29:07.410Z,1527143347.410 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T06:24:07.1Z
2018-05-24T06:29:07.410Z,1527143347.410 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T06:29:07.410Z,1527143347.410 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T06:29:11.718Z,1527143351.718 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0118.lzma
2018-05-24T06:29:12.518Z,1527143352.518 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0118.lzma.bak
2018-05-24T06:29:12.519Z,1527143352.519 [DataOverHttps](INFO): SBD MOMSN=8291587
2018-05-24T06:29:21.339Z,1527143361.339 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:29:21.339Z,1527143361.339 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T06:29:21.339Z,1527143361.339 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:29:21.341Z,1527143361.341 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:29:21.341Z,1527143361.341 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T06:29:21.341Z,1527143361.341 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:29:21.353Z,1527143361.353 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:29:21.353Z,1527143361.353 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:29:21.398Z,1527143361.398 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0119.lzma
2018-05-24T06:29:21.505Z,1527143361.505 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:29:21.505Z,1527143361.505 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T06:29:21.506Z,1527143361.506 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:29:21.506Z,1527143361.506 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T06:29:21.807Z,1527143361.807 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:29:21.807Z,1527143361.807 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:29:21.808Z,1527143361.808 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:29:21.808Z,1527143361.808 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:29:21.809Z,1527143361.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:29:21.809Z,1527143361.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:29:22.163Z,1527143362.163 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0119.lzma.bak
2018-05-24T06:29:22.163Z,1527143362.163 [DataOverHttps](INFO): SBD MOMSN=8291589
2018-05-24T06:29:23.044Z,1527143363.044 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T06:29:23.044Z,1527143363.044 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T06:29:23.044Z,1527143363.044 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T06:32:21.852Z,1527143541.852 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:32:21.852Z,1527143541.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T06:32:21.852Z,1527143541.852 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:32:21.853Z,1527143541.853 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:32:21.854Z,1527143541.854 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T06:32:21.854Z,1527143541.854 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:32:21.865Z,1527143541.865 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:32:21.866Z,1527143541.866 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:32:22.261Z,1527143542.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:32:22.261Z,1527143542.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T06:32:22.262Z,1527143542.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:32:22.262Z,1527143542.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T06:32:22.653Z,1527143542.653 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:32:22.654Z,1527143542.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:32:22.654Z,1527143542.654 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:32:22.655Z,1527143542.655 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:32:22.655Z,1527143542.655 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:32:22.655Z,1527143542.655 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:34:23.422Z,1527143663.422 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T06:34:23.422Z,1527143663.422 [Default:CheckIn:C.Wait] Stopped
2018-05-24T06:34:23.422Z,1527143663.422 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T06:34:23.422Z,1527143663.422 [Default:CheckIn:D] Running Loop=1
2018-05-24T06:34:23.822Z,1527143663.822 [Default:CheckIn:D] Stopped
2018-05-24T06:34:23.822Z,1527143663.822 [Default:CheckIn:E] Running Loop=1
2018-05-24T06:34:24.226Z,1527143664.226 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 402.761393 min 
2018-05-24T06:34:24.226Z,1527143664.226 [Default:CheckIn:E] Stopped
2018-05-24T06:34:24.227Z,1527143664.227 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T06:34:24.227Z,1527143664.227 [Default:CheckIn] Stopped
2018-05-24T06:34:24.227Z,1527143664.227 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T06:34:24.227Z,1527143664.227 [Default:CheckIn](INFO): Running loop #40
2018-05-24T06:34:24.227Z,1527143664.227 [Default:CheckIn] Running Loop=40
2018-05-24T06:34:24.227Z,1527143664.227 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T06:34:24.227Z,1527143664.227 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T06:35:22.979Z,1527143722.979 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:35:22.979Z,1527143722.979 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T06:35:22.979Z,1527143722.979 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:35:22.981Z,1527143722.981 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:35:22.981Z,1527143722.981 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T06:35:22.981Z,1527143722.981 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:35:23.016Z,1527143723.016 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:35:23.017Z,1527143723.017 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:35:23.411Z,1527143723.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:35:23.411Z,1527143723.411 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T06:35:23.411Z,1527143723.411 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:35:23.411Z,1527143723.411 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T06:35:23.787Z,1527143723.787 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:35:23.787Z,1527143723.787 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:35:23.788Z,1527143723.788 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:35:23.788Z,1527143723.788 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:35:23.788Z,1527143723.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:35:23.789Z,1527143723.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:38:24.094Z,1527143904.094 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:38:24.094Z,1527143904.094 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T06:38:24.094Z,1527143904.094 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:38:24.096Z,1527143904.096 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:38:24.096Z,1527143904.096 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T06:38:24.096Z,1527143904.096 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:38:24.107Z,1527143904.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:38:24.108Z,1527143904.108 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:38:24.506Z,1527143904.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:38:24.506Z,1527143904.506 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T06:38:24.507Z,1527143904.507 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:38:24.507Z,1527143904.507 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T06:38:24.899Z,1527143904.899 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:38:24.899Z,1527143904.899 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:38:24.900Z,1527143904.900 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:38:24.900Z,1527143904.900 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:38:24.901Z,1527143904.901 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:38:24.901Z,1527143904.901 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:38:30.510Z,1527143910.510 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T06:39:24.470Z,1527143964.470 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T06:34:24.2Z
2018-05-24T06:39:24.470Z,1527143964.470 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T06:39:24.470Z,1527143964.470 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T06:39:28.901Z,1527143968.901 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0121.lzma
2018-05-24T06:39:29.690Z,1527143969.690 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0121.lzma.bak
2018-05-24T06:39:29.691Z,1527143969.691 [DataOverHttps](INFO): SBD MOMSN=8291592
2018-05-24T06:39:38.594Z,1527143978.594 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0122.lzma
2018-05-24T06:39:39.360Z,1527143979.360 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0122.lzma.bak
2018-05-24T06:39:39.361Z,1527143979.361 [DataOverHttps](INFO): SBD MOMSN=8291594
2018-05-24T06:39:40.247Z,1527143980.247 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T06:39:40.248Z,1527143980.248 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T06:39:40.248Z,1527143980.248 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T06:41:25.048Z,1527144085.048 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:41:25.048Z,1527144085.048 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T06:41:25.048Z,1527144085.048 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:41:25.050Z,1527144085.050 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:41:25.050Z,1527144085.050 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T06:41:25.050Z,1527144085.050 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:41:25.062Z,1527144085.062 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:41:25.062Z,1527144085.062 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:41:25.459Z,1527144085.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:41:25.459Z,1527144085.459 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T06:41:25.460Z,1527144085.460 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:41:25.460Z,1527144085.460 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T06:41:25.852Z,1527144085.852 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:41:25.853Z,1527144085.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:41:25.853Z,1527144085.853 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:41:25.854Z,1527144085.854 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:41:25.854Z,1527144085.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:41:25.854Z,1527144085.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:42:55.780Z,1527144175.780 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.379568 seconds old.
2018-05-24T06:42:55.781Z,1527144175.781 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.379348 seconds old.
2018-05-24T06:42:56.177Z,1527144176.177 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.776365 seconds old.
2018-05-24T06:42:56.178Z,1527144176.178 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.776037 seconds old.
2018-05-24T06:42:56.579Z,1527144176.579 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.178182 seconds old.
2018-05-24T06:42:56.580Z,1527144176.580 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.177835 seconds old.
2018-05-24T06:42:56.985Z,1527144176.985 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.584462 seconds old.
2018-05-24T06:42:56.986Z,1527144176.986 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.584125 seconds old.
2018-05-24T06:42:57.379Z,1527144177.379 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.978574 seconds old.
2018-05-24T06:42:57.380Z,1527144177.380 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.978230 seconds old.
2018-05-24T06:42:57.777Z,1527144177.777 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.376448 seconds old.
2018-05-24T06:42:57.778Z,1527144177.778 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.376135 seconds old.
2018-05-24T06:42:58.187Z,1527144178.187 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.785939 seconds old.
2018-05-24T06:42:58.188Z,1527144178.188 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.785598 seconds old.
2018-05-24T06:42:58.582Z,1527144178.582 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.181384 seconds old.
2018-05-24T06:42:58.583Z,1527144178.583 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.181054 seconds old.
2018-05-24T06:42:58.983Z,1527144178.983 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.582202 seconds old.
2018-05-24T06:42:58.984Z,1527144178.984 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.581865 seconds old.
2018-05-24T06:42:59.389Z,1527144179.389 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.988494 seconds old.
2018-05-24T06:42:59.390Z,1527144179.390 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.988153 seconds old.
2018-05-24T06:42:59.779Z,1527144179.779 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.378699 seconds old.
2018-05-24T06:42:59.780Z,1527144179.780 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.378364 seconds old.
2018-05-24T06:43:00.183Z,1527144180.183 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.781948 seconds old.
2018-05-24T06:43:00.184Z,1527144180.184 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.781609 seconds old.
2018-05-24T06:43:00.583Z,1527144180.583 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.182560 seconds old.
2018-05-24T06:43:00.584Z,1527144180.584 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.182213 seconds old.
2018-05-24T06:43:00.978Z,1527144180.978 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.577263 seconds old.
2018-05-24T06:43:00.979Z,1527144180.979 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.576919 seconds old.
2018-05-24T06:43:01.387Z,1527144181.387 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.986171 seconds old.
2018-05-24T06:43:01.388Z,1527144181.388 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.985825 seconds old.
2018-05-24T06:43:01.782Z,1527144181.782 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.381693 seconds old.
2018-05-24T06:43:01.783Z,1527144181.783 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.381354 seconds old.
2018-05-24T06:43:02.181Z,1527144182.181 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.780144 seconds old.
2018-05-24T06:43:02.182Z,1527144182.182 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.779880 seconds old.
2018-05-24T06:43:02.582Z,1527144182.582 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.181549 seconds old.
2018-05-24T06:43:02.583Z,1527144182.583 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.181206 seconds old.
2018-05-24T06:43:02.991Z,1527144182.991 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.590221 seconds old.
2018-05-24T06:43:02.992Z,1527144182.992 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.589884 seconds old.
2018-05-24T06:43:03.382Z,1527144183.382 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.981538 seconds old.
2018-05-24T06:43:03.383Z,1527144183.383 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.981199 seconds old.
2018-05-24T06:43:03.782Z,1527144183.782 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.381526 seconds old.
2018-05-24T06:43:03.783Z,1527144183.783 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.381199 seconds old.
2018-05-24T06:43:04.181Z,1527144184.181 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.780468 seconds old.
2018-05-24T06:43:04.182Z,1527144184.182 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.780144 seconds old.
2018-05-24T06:43:04.587Z,1527144184.587 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.185910 seconds old.
2018-05-24T06:43:04.588Z,1527144184.588 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.185583 seconds old.
2018-05-24T06:43:04.982Z,1527144184.982 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.581574 seconds old.
2018-05-24T06:43:04.983Z,1527144184.983 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.581258 seconds old.
2018-05-24T06:43:05.382Z,1527144185.382 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.981225 seconds old.
2018-05-24T06:43:05.383Z,1527144185.383 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.980894 seconds old.
2018-05-24T06:43:05.782Z,1527144185.782 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.381556 seconds old.
2018-05-24T06:43:05.783Z,1527144185.783 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.381258 seconds old.
2018-05-24T06:43:06.181Z,1527144186.181 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.779807 seconds old.
2018-05-24T06:43:06.182Z,1527144186.182 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.779728 seconds old.
2018-05-24T06:43:06.583Z,1527144186.583 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.182016 seconds old.
2018-05-24T06:43:06.584Z,1527144186.584 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.181722 seconds old.
2018-05-24T06:43:06.981Z,1527144186.981 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.580246 seconds old.
2018-05-24T06:43:06.982Z,1527144186.982 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.579959 seconds old.
2018-05-24T06:43:07.381Z,1527144187.381 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.980706 seconds old.
2018-05-24T06:43:07.383Z,1527144187.383 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.980414 seconds old.
2018-05-24T06:43:07.787Z,1527144187.787 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.385922 seconds old.
2018-05-24T06:43:07.788Z,1527144187.788 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.385624 seconds old.
2018-05-24T06:43:08.189Z,1527144188.189 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.787891 seconds old.
2018-05-24T06:43:08.190Z,1527144188.190 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.787673 seconds old.
2018-05-24T06:44:26.184Z,1527144266.184 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:44:26.184Z,1527144266.184 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T06:44:26.184Z,1527144266.184 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:44:26.206Z,1527144266.206 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:44:26.206Z,1527144266.206 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T06:44:26.206Z,1527144266.206 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:44:26.232Z,1527144266.232 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:44:26.232Z,1527144266.232 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:44:26.620Z,1527144266.620 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:44:26.620Z,1527144266.620 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T06:44:26.620Z,1527144266.620 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:44:26.620Z,1527144266.620 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T06:44:27.003Z,1527144267.003 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:44:27.003Z,1527144267.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:44:27.003Z,1527144267.003 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:44:27.004Z,1527144267.004 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:44:27.004Z,1527144267.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:44:27.004Z,1527144267.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:44:39.784Z,1527144279.784 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.374732 seconds old.
2018-05-24T06:44:39.786Z,1527144279.786 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.375352 seconds old.
2018-05-24T06:44:40.183Z,1527144280.183 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.773484 seconds old.
2018-05-24T06:44:40.184Z,1527144280.184 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.773885 seconds old.
2018-05-24T06:44:40.581Z,1527144280.581 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.171707 seconds old.
2018-05-24T06:44:40.582Z,1527144280.582 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.172104 seconds old.
2018-05-24T06:44:40.584Z,1527144280.584 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T06:44:40.584Z,1527144280.584 [Default:CheckIn:C.Wait] Stopped
2018-05-24T06:44:40.584Z,1527144280.584 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T06:44:40.584Z,1527144280.584 [Default:CheckIn:D] Running Loop=1
2018-05-24T06:44:40.983Z,1527144280.983 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.573676 seconds old.
2018-05-24T06:44:40.984Z,1527144280.984 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.574071 seconds old.
2018-05-24T06:44:40.986Z,1527144280.986 [Default:CheckIn:D] Stopped
2018-05-24T06:44:40.986Z,1527144280.986 [Default:CheckIn:E] Running Loop=1
2018-05-24T06:44:41.382Z,1527144281.382 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.972671 seconds old.
2018-05-24T06:44:41.383Z,1527144281.383 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.973066 seconds old.
2018-05-24T06:44:41.386Z,1527144281.386 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 413.047493 min 
2018-05-24T06:44:41.386Z,1527144281.386 [Default:CheckIn:E] Stopped
2018-05-24T06:44:41.386Z,1527144281.386 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T06:44:41.386Z,1527144281.386 [Default:CheckIn] Stopped
2018-05-24T06:44:41.386Z,1527144281.386 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T06:44:41.386Z,1527144281.386 [Default:CheckIn](INFO): Running loop #41
2018-05-24T06:44:41.386Z,1527144281.386 [Default:CheckIn] Running Loop=41
2018-05-24T06:44:41.387Z,1527144281.387 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T06:44:41.387Z,1527144281.387 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T06:44:41.783Z,1527144281.783 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.373019 seconds old.
2018-05-24T06:44:41.784Z,1527144281.784 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.373405 seconds old.
2018-05-24T06:44:42.184Z,1527144282.184 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.774626 seconds old.
2018-05-24T06:44:42.186Z,1527144282.186 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.775255 seconds old.
2018-05-24T06:44:45.278Z,1527144285.278 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.868654 seconds old.
2018-05-24T06:44:45.279Z,1527144285.279 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.869062 seconds old.
2018-05-24T06:44:45.398Z,1527144285.398 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.988637 seconds old.
2018-05-24T06:44:45.399Z,1527144285.399 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.989049 seconds old.
2018-05-24T06:44:45.759Z,1527144285.759 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.349746 seconds old.
2018-05-24T06:44:45.760Z,1527144285.760 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.350135 seconds old.
2018-05-24T06:47:27.295Z,1527144447.295 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:47:27.295Z,1527144447.295 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T06:47:27.295Z,1527144447.295 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:47:27.310Z,1527144447.310 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:47:27.310Z,1527144447.310 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T06:47:27.310Z,1527144447.310 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:47:27.348Z,1527144447.348 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:47:27.348Z,1527144447.348 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:47:27.695Z,1527144447.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:47:27.695Z,1527144447.695 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T06:47:27.695Z,1527144447.695 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:47:27.695Z,1527144447.695 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T06:47:28.084Z,1527144448.084 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:47:28.085Z,1527144448.085 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:47:28.085Z,1527144448.085 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:47:28.086Z,1527144448.086 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:47:28.086Z,1527144448.086 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:47:28.087Z,1527144448.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:48:30.856Z,1527144510.856 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T06:49:41.640Z,1527144581.640 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T06:44:41.4Z
2018-05-24T06:49:41.640Z,1527144581.640 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T06:49:41.640Z,1527144581.640 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T06:49:45.958Z,1527144585.958 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0124.lzma
2018-05-24T06:49:46.758Z,1527144586.758 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0124.lzma.bak
2018-05-24T06:49:46.759Z,1527144586.759 [DataOverHttps](INFO): SBD MOMSN=8291597
2018-05-24T06:49:55.638Z,1527144595.638 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0125.lzma
2018-05-24T06:49:56.418Z,1527144596.418 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0125.lzma.bak
2018-05-24T06:49:56.419Z,1527144596.419 [DataOverHttps](INFO): SBD MOMSN=8291599
2018-05-24T06:49:57.284Z,1527144597.284 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T06:49:57.284Z,1527144597.284 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T06:49:57.284Z,1527144597.284 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T06:50:28.137Z,1527144628.137 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:50:28.137Z,1527144628.137 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T06:50:28.137Z,1527144628.137 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:50:28.139Z,1527144628.139 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:50:28.139Z,1527144628.139 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T06:50:28.139Z,1527144628.139 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:50:28.151Z,1527144628.151 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:50:28.151Z,1527144628.151 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:50:28.550Z,1527144628.550 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:50:28.550Z,1527144628.550 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T06:50:28.550Z,1527144628.550 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:50:28.550Z,1527144628.550 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T06:50:28.935Z,1527144628.935 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:50:28.936Z,1527144628.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:50:28.936Z,1527144628.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:50:28.937Z,1527144628.937 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:50:28.937Z,1527144628.937 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:50:28.938Z,1527144628.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:53:29.234Z,1527144809.234 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:53:29.234Z,1527144809.234 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T06:53:29.234Z,1527144809.234 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:53:29.236Z,1527144809.236 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:53:29.236Z,1527144809.236 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T06:53:29.236Z,1527144809.236 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:53:29.269Z,1527144809.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:53:29.269Z,1527144809.269 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:53:29.682Z,1527144809.682 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:53:29.682Z,1527144809.682 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T06:53:29.683Z,1527144809.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:53:29.683Z,1527144809.683 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T06:53:30.035Z,1527144810.035 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:53:30.035Z,1527144810.035 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:53:30.036Z,1527144810.036 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:53:30.036Z,1527144810.036 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:53:30.037Z,1527144810.037 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:53:30.037Z,1527144810.037 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:54:57.605Z,1527144897.605 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T06:54:57.605Z,1527144897.605 [Default:CheckIn:C.Wait] Stopped
2018-05-24T06:54:57.606Z,1527144897.606 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T06:54:57.606Z,1527144897.606 [Default:CheckIn:D] Running Loop=1
2018-05-24T06:54:58.002Z,1527144898.002 [Default:CheckIn:D] Stopped
2018-05-24T06:54:58.002Z,1527144898.002 [Default:CheckIn:E] Running Loop=1
2018-05-24T06:54:58.404Z,1527144898.404 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 423.331087 min 
2018-05-24T06:54:58.404Z,1527144898.404 [Default:CheckIn:E] Stopped
2018-05-24T06:54:58.404Z,1527144898.404 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T06:54:58.405Z,1527144898.405 [Default:CheckIn] Stopped
2018-05-24T06:54:58.405Z,1527144898.405 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T06:54:58.405Z,1527144898.405 [Default:CheckIn](INFO): Running loop #42
2018-05-24T06:54:58.405Z,1527144898.405 [Default:CheckIn] Running Loop=42
2018-05-24T06:54:58.405Z,1527144898.405 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T06:54:58.405Z,1527144898.405 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T06:56:30.406Z,1527144990.406 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:56:30.406Z,1527144990.406 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T06:56:30.406Z,1527144990.406 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:56:30.408Z,1527144990.408 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:56:30.408Z,1527144990.408 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T06:56:30.408Z,1527144990.408 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:56:30.432Z,1527144990.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:56:30.432Z,1527144990.432 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:56:30.855Z,1527144990.855 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:56:30.855Z,1527144990.855 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T06:56:30.855Z,1527144990.855 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:56:30.855Z,1527144990.855 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T06:56:31.200Z,1527144991.200 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:56:31.200Z,1527144991.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:56:31.201Z,1527144991.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:56:31.201Z,1527144991.201 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:56:31.202Z,1527144991.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:56:31.202Z,1527144991.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:58:31.212Z,1527145111.212 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T06:59:31.526Z,1527145171.526 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:59:31.527Z,1527145171.527 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T06:59:31.527Z,1527145171.527 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T06:59:31.528Z,1527145171.528 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T06:59:31.528Z,1527145171.528 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T06:59:31.528Z,1527145171.528 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T06:59:31.540Z,1527145171.540 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T06:59:31.540Z,1527145171.540 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T06:59:31.939Z,1527145171.939 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T06:59:31.939Z,1527145171.939 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T06:59:31.940Z,1527145171.940 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T06:59:31.940Z,1527145171.940 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T06:59:32.328Z,1527145172.328 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T06:59:32.330Z,1527145172.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:59:32.330Z,1527145172.330 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:59:32.330Z,1527145172.330 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T06:59:32.331Z,1527145172.331 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T06:59:32.331Z,1527145172.331 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T06:59:58.732Z,1527145198.732 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T06:54:58.4Z
2018-05-24T06:59:58.732Z,1527145198.732 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T06:59:58.732Z,1527145198.732 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T07:00:03.051Z,1527145203.051 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0127.lzma
2018-05-24T07:00:03.851Z,1527145203.851 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0127.lzma.bak
2018-05-24T07:00:03.851Z,1527145203.851 [DataOverHttps](INFO): SBD MOMSN=8291602
2018-05-24T07:00:12.820Z,1527145212.820 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0128.lzma
2018-05-24T07:00:13.610Z,1527145213.610 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0128.lzma.bak
2018-05-24T07:00:13.611Z,1527145213.611 [DataOverHttps](INFO): SBD MOMSN=8291604
2018-05-24T07:00:14.471Z,1527145214.471 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T07:00:14.472Z,1527145214.472 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T07:00:14.472Z,1527145214.472 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T07:02:32.555Z,1527145352.555 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:02:32.555Z,1527145352.555 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T07:02:32.555Z,1527145352.555 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:02:32.557Z,1527145352.557 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:02:32.557Z,1527145352.557 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T07:02:32.557Z,1527145352.557 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:02:32.589Z,1527145352.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:02:32.589Z,1527145352.589 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:02:32.994Z,1527145352.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:02:32.994Z,1527145352.994 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T07:02:32.994Z,1527145352.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:02:32.994Z,1527145352.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T07:02:33.350Z,1527145353.350 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:02:33.351Z,1527145353.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:02:33.351Z,1527145353.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:02:33.352Z,1527145353.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:02:33.353Z,1527145353.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:02:33.353Z,1527145353.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:05:14.897Z,1527145514.897 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T07:05:14.898Z,1527145514.898 [Default:CheckIn:C.Wait] Stopped
2018-05-24T07:05:14.898Z,1527145514.898 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T07:05:14.898Z,1527145514.898 [Default:CheckIn:D] Running Loop=1
2018-05-24T07:05:15.291Z,1527145515.291 [Default:CheckIn:D] Stopped
2018-05-24T07:05:15.291Z,1527145515.291 [Default:CheckIn:E] Running Loop=1
2018-05-24T07:05:15.692Z,1527145515.692 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 433.619238 min 
2018-05-24T07:05:15.692Z,1527145515.692 [Default:CheckIn:E] Stopped
2018-05-24T07:05:15.692Z,1527145515.692 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T07:05:15.692Z,1527145515.692 [Default:CheckIn] Stopped
2018-05-24T07:05:15.692Z,1527145515.692 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T07:05:15.693Z,1527145515.693 [Default:CheckIn](INFO): Running loop #43
2018-05-24T07:05:15.693Z,1527145515.693 [Default:CheckIn] Running Loop=43
2018-05-24T07:05:15.693Z,1527145515.693 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T07:05:15.693Z,1527145515.693 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T07:05:33.660Z,1527145533.660 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:05:33.660Z,1527145533.660 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T07:05:33.660Z,1527145533.660 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:05:33.662Z,1527145533.662 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:05:33.662Z,1527145533.662 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T07:05:33.662Z,1527145533.662 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:05:33.693Z,1527145533.693 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:05:33.694Z,1527145533.694 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:05:33.694Z,1527145533.694 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:05:33.694Z,1527145533.694 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:08:31.230Z,1527145711.230 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T07:10:15.951Z,1527145815.951 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T07:05:15.7Z
2018-05-24T07:10:15.951Z,1527145815.951 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T07:10:15.951Z,1527145815.951 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T07:10:20.324Z,1527145820.324 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0130.lzma
2018-05-24T07:10:21.123Z,1527145821.123 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0130.lzma.bak
2018-05-24T07:10:21.123Z,1527145821.123 [DataOverHttps](INFO): SBD MOMSN=8291607
2018-05-24T07:10:30.023Z,1527145830.023 [DataOverHttps](INFO): Sending 179 bytes from file Logs/20180523T234807/Express0131.lzma
2018-05-24T07:10:30.792Z,1527145830.792 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0131.lzma.bak
2018-05-24T07:10:30.792Z,1527145830.792 [DataOverHttps](INFO): SBD MOMSN=8291609
2018-05-24T07:10:31.658Z,1527145831.658 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T07:10:31.659Z,1527145831.659 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T07:10:31.659Z,1527145831.659 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T07:15:31.968Z,1527146131.968 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T07:15:31.968Z,1527146131.968 [Default:CheckIn:C.Wait] Stopped
2018-05-24T07:15:31.968Z,1527146131.968 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T07:15:31.968Z,1527146131.968 [Default:CheckIn:D] Running Loop=1
2018-05-24T07:15:32.365Z,1527146132.365 [Default:CheckIn:D] Stopped
2018-05-24T07:15:32.365Z,1527146132.365 [Default:CheckIn:E] Running Loop=1
2018-05-24T07:15:32.765Z,1527146132.765 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 443.903809 min 
2018-05-24T07:15:32.765Z,1527146132.765 [Default:CheckIn:E] Stopped
2018-05-24T07:15:32.765Z,1527146132.765 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T07:15:32.766Z,1527146132.766 [Default:CheckIn] Stopped
2018-05-24T07:15:32.766Z,1527146132.766 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T07:15:32.766Z,1527146132.766 [Default:CheckIn](INFO): Running loop #44
2018-05-24T07:15:32.766Z,1527146132.766 [Default:CheckIn] Running Loop=44
2018-05-24T07:15:32.766Z,1527146132.766 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T07:15:32.766Z,1527146132.766 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T07:18:31.496Z,1527146311.496 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T07:20:33.047Z,1527146433.047 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T07:15:32.8Z
2018-05-24T07:20:33.047Z,1527146433.047 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T07:20:33.047Z,1527146433.047 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T07:20:34.061Z,1527146434.061 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:20:34.061Z,1527146434.061 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T07:20:34.062Z,1527146434.062 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:20:34.062Z,1527146434.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T07:20:34.254Z,1527146434.254 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:20:34.255Z,1527146434.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:20:34.255Z,1527146434.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:20:34.255Z,1527146434.255 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:20:34.256Z,1527146434.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:20:34.256Z,1527146434.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:20:37.364Z,1527146437.364 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0133.lzma
2018-05-24T07:20:38.163Z,1527146438.163 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0133.lzma.bak
2018-05-24T07:20:38.163Z,1527146438.163 [DataOverHttps](INFO): SBD MOMSN=8291614
2018-05-24T07:20:47.183Z,1527146447.183 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0134.lzma
2018-05-24T07:20:47.975Z,1527146447.975 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0134.lzma.bak
2018-05-24T07:20:47.975Z,1527146447.975 [DataOverHttps](INFO): SBD MOMSN=8291616
2018-05-24T07:20:48.850Z,1527146448.850 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T07:20:48.850Z,1527146448.850 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T07:20:48.850Z,1527146448.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T07:23:34.495Z,1527146614.495 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:23:34.495Z,1527146614.495 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T07:23:34.495Z,1527146614.495 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:23:34.497Z,1527146614.497 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:23:34.497Z,1527146614.497 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T07:23:34.497Z,1527146614.497 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:23:34.508Z,1527146614.508 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:23:34.537Z,1527146614.537 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:23:34.906Z,1527146614.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:23:34.906Z,1527146614.906 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T07:23:34.907Z,1527146614.907 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:23:34.907Z,1527146614.907 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T07:23:35.306Z,1527146615.306 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:23:35.307Z,1527146615.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:23:35.307Z,1527146615.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:23:35.307Z,1527146615.307 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:23:35.308Z,1527146615.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:23:35.308Z,1527146615.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:25:49.253Z,1527146749.253 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T07:25:49.253Z,1527146749.253 [Default:CheckIn:C.Wait] Stopped
2018-05-24T07:25:49.254Z,1527146749.254 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T07:25:49.254Z,1527146749.254 [Default:CheckIn:D] Running Loop=1
2018-05-24T07:25:49.646Z,1527146749.646 [Default:CheckIn:D] Stopped
2018-05-24T07:25:49.646Z,1527146749.646 [Default:CheckIn:E] Running Loop=1
2018-05-24T07:25:50.047Z,1527146750.047 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 454.191797 min 
2018-05-24T07:25:50.047Z,1527146750.047 [Default:CheckIn:E] Stopped
2018-05-24T07:25:50.047Z,1527146750.047 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T07:25:50.047Z,1527146750.047 [Default:CheckIn] Stopped
2018-05-24T07:25:50.047Z,1527146750.047 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T07:25:50.048Z,1527146750.048 [Default:CheckIn](INFO): Running loop #45
2018-05-24T07:25:50.048Z,1527146750.048 [Default:CheckIn] Running Loop=45
2018-05-24T07:25:50.048Z,1527146750.048 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T07:25:50.048Z,1527146750.048 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T07:26:35.620Z,1527146795.620 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:26:35.620Z,1527146795.620 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T07:26:35.620Z,1527146795.620 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:26:35.622Z,1527146795.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:26:35.622Z,1527146795.622 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T07:26:35.622Z,1527146795.622 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:26:35.669Z,1527146795.669 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:26:35.670Z,1527146795.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:26:36.034Z,1527146796.034 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:26:36.034Z,1527146796.034 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T07:26:36.035Z,1527146796.035 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:26:36.035Z,1527146796.035 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T07:26:36.423Z,1527146796.423 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:26:36.423Z,1527146796.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:26:36.424Z,1527146796.424 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:26:36.424Z,1527146796.424 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:26:36.424Z,1527146796.424 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:26:36.425Z,1527146796.425 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:28:31.603Z,1527146911.603 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T07:29:36.742Z,1527146976.742 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:29:36.742Z,1527146976.742 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T07:29:36.742Z,1527146976.742 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:29:36.744Z,1527146976.744 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:29:36.744Z,1527146976.744 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T07:29:36.744Z,1527146976.744 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:29:36.775Z,1527146976.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:29:36.776Z,1527146976.776 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:29:37.152Z,1527146977.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:29:37.152Z,1527146977.152 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T07:29:37.152Z,1527146977.152 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:29:37.153Z,1527146977.153 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T07:29:37.540Z,1527146977.540 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:29:37.541Z,1527146977.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:29:37.541Z,1527146977.541 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:29:37.541Z,1527146977.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:29:37.542Z,1527146977.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:29:37.542Z,1527146977.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:30:50.307Z,1527147050.307 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T07:25:50.0Z
2018-05-24T07:30:50.307Z,1527147050.307 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T07:30:50.307Z,1527147050.307 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T07:30:54.765Z,1527147054.765 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0136.lzma
2018-05-24T07:30:55.534Z,1527147055.534 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0136.lzma.bak
2018-05-24T07:30:55.535Z,1527147055.535 [DataOverHttps](INFO): SBD MOMSN=8291619
2018-05-24T07:31:04.424Z,1527147064.424 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0137.lzma
2018-05-24T07:31:05.195Z,1527147065.195 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0137.lzma.bak
2018-05-24T07:31:05.195Z,1527147065.195 [DataOverHttps](INFO): SBD MOMSN=8291621
2018-05-24T07:31:06.076Z,1527147066.076 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T07:31:06.076Z,1527147066.076 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T07:31:06.076Z,1527147066.076 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T07:32:37.701Z,1527147157.701 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:32:37.701Z,1527147157.701 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T07:32:37.701Z,1527147157.701 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:32:37.703Z,1527147157.703 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:32:37.703Z,1527147157.703 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T07:32:37.703Z,1527147157.703 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:32:37.715Z,1527147157.715 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:32:37.715Z,1527147157.715 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:32:38.103Z,1527147158.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:32:38.103Z,1527147158.103 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T07:32:38.104Z,1527147158.104 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:32:38.104Z,1527147158.104 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T07:32:38.497Z,1527147158.497 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:32:38.498Z,1527147158.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:32:38.498Z,1527147158.498 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:32:38.498Z,1527147158.498 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:32:38.499Z,1527147158.499 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:32:38.499Z,1527147158.499 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:35:38.856Z,1527147338.856 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:35:38.856Z,1527147338.856 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T07:35:38.856Z,1527147338.856 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:35:38.858Z,1527147338.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:35:38.858Z,1527147338.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T07:35:38.858Z,1527147338.858 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:35:38.910Z,1527147338.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:35:38.910Z,1527147338.910 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:35:39.264Z,1527147339.264 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:35:39.264Z,1527147339.264 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T07:35:39.264Z,1527147339.264 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:35:39.264Z,1527147339.264 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T07:35:39.652Z,1527147339.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:35:39.653Z,1527147339.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:35:39.653Z,1527147339.653 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:35:39.654Z,1527147339.654 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:35:39.654Z,1527147339.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:35:39.654Z,1527147339.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:36:06.513Z,1527147366.513 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T07:36:06.513Z,1527147366.513 [Default:CheckIn:C.Wait] Stopped
2018-05-24T07:36:06.514Z,1527147366.514 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T07:36:06.514Z,1527147366.514 [Default:CheckIn:D] Running Loop=1
2018-05-24T07:36:06.918Z,1527147366.918 [Default:CheckIn:D] Stopped
2018-05-24T07:36:06.918Z,1527147366.918 [Default:CheckIn:E] Running Loop=1
2018-05-24T07:36:07.291Z,1527147367.291 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 464.479688 min 
2018-05-24T07:36:07.291Z,1527147367.291 [Default:CheckIn:E] Stopped
2018-05-24T07:36:07.291Z,1527147367.291 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T07:36:07.291Z,1527147367.291 [Default:CheckIn] Stopped
2018-05-24T07:36:07.291Z,1527147367.291 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T07:36:07.292Z,1527147367.292 [Default:CheckIn](INFO): Running loop #46
2018-05-24T07:36:07.292Z,1527147367.292 [Default:CheckIn] Running Loop=46
2018-05-24T07:36:07.292Z,1527147367.292 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T07:36:07.292Z,1527147367.292 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T07:38:31.833Z,1527147511.833 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T07:38:39.827Z,1527147519.827 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:38:39.827Z,1527147519.827 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T07:38:39.827Z,1527147519.827 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:38:39.828Z,1527147519.828 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:38:39.829Z,1527147519.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T07:38:39.829Z,1527147519.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:38:39.857Z,1527147519.857 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:38:39.858Z,1527147519.858 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:38:40.239Z,1527147520.239 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:38:40.239Z,1527147520.239 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T07:38:40.239Z,1527147520.239 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:38:40.239Z,1527147520.239 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T07:38:40.624Z,1527147520.624 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:38:40.624Z,1527147520.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:38:40.624Z,1527147520.624 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:38:40.625Z,1527147520.625 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:38:40.626Z,1527147520.626 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:38:40.626Z,1527147520.626 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:41:07.357Z,1527147667.357 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T07:36:07.3Z
2018-05-24T07:41:07.357Z,1527147667.357 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T07:41:07.357Z,1527147667.357 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T07:41:11.723Z,1527147671.723 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0139.lzma
2018-05-24T07:41:12.512Z,1527147672.512 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0139.lzma.bak
2018-05-24T07:41:12.512Z,1527147672.512 [DataOverHttps](INFO): SBD MOMSN=8291624
2018-05-24T07:41:21.484Z,1527147681.484 [DataOverHttps](INFO): Sending 100 bytes from file Logs/20180523T234807/Express0140.lzma
2018-05-24T07:41:22.253Z,1527147682.253 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0140.lzma.bak
2018-05-24T07:41:22.253Z,1527147682.253 [DataOverHttps](INFO): SBD MOMSN=8291626
2018-05-24T07:41:23.132Z,1527147683.132 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T07:41:23.132Z,1527147683.132 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T07:41:23.132Z,1527147683.132 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T07:41:40.794Z,1527147700.794 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:41:40.794Z,1527147700.794 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T07:41:40.794Z,1527147700.794 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:41:40.795Z,1527147700.795 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:41:40.796Z,1527147700.796 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T07:41:40.796Z,1527147700.796 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:41:40.808Z,1527147700.808 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:41:40.808Z,1527147700.808 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:41:41.206Z,1527147701.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:41:41.206Z,1527147701.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T07:41:41.207Z,1527147701.207 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:41:41.207Z,1527147701.207 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T07:41:41.599Z,1527147701.599 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:41:41.600Z,1527147701.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:41:41.600Z,1527147701.600 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:41:41.600Z,1527147701.600 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:41:41.602Z,1527147701.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:41:41.602Z,1527147701.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:44:41.922Z,1527147881.922 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:44:41.922Z,1527147881.922 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T07:44:41.922Z,1527147881.922 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:44:41.924Z,1527147881.924 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:44:41.924Z,1527147881.924 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T07:44:41.924Z,1527147881.924 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:44:41.936Z,1527147881.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:44:41.949Z,1527147881.949 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:44:42.339Z,1527147882.339 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:44:42.339Z,1527147882.339 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T07:44:42.339Z,1527147882.339 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:44:42.339Z,1527147882.339 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T07:44:42.727Z,1527147882.727 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:44:42.728Z,1527147882.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:44:42.728Z,1527147882.728 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:44:42.728Z,1527147882.728 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:44:42.729Z,1527147882.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:44:42.729Z,1527147882.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:46:23.492Z,1527147983.492 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T07:46:23.492Z,1527147983.492 [Default:CheckIn:C.Wait] Stopped
2018-05-24T07:46:23.492Z,1527147983.492 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T07:46:23.492Z,1527147983.492 [Default:CheckIn:D] Running Loop=1
2018-05-24T07:46:23.892Z,1527147983.892 [Default:CheckIn:D] Stopped
2018-05-24T07:46:23.892Z,1527147983.892 [Default:CheckIn:E] Running Loop=1
2018-05-24T07:46:24.298Z,1527147984.298 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 474.762565 min 
2018-05-24T07:46:24.298Z,1527147984.298 [Default:CheckIn:E] Stopped
2018-05-24T07:46:24.298Z,1527147984.298 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T07:46:24.299Z,1527147984.299 [Default:CheckIn] Stopped
2018-05-24T07:46:24.299Z,1527147984.299 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T07:46:24.299Z,1527147984.299 [Default:CheckIn](INFO): Running loop #47
2018-05-24T07:46:24.299Z,1527147984.299 [Default:CheckIn] Running Loop=47
2018-05-24T07:46:24.299Z,1527147984.299 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T07:46:24.299Z,1527147984.299 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T07:47:43.060Z,1527148063.060 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:47:43.060Z,1527148063.060 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T07:47:43.060Z,1527148063.060 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:47:43.062Z,1527148063.062 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:47:43.062Z,1527148063.062 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T07:47:43.062Z,1527148063.062 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:47:43.074Z,1527148063.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:47:43.075Z,1527148063.075 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:47:43.474Z,1527148063.474 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:47:43.474Z,1527148063.474 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T07:47:43.474Z,1527148063.474 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:47:43.474Z,1527148063.474 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T07:47:43.863Z,1527148063.863 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:47:43.863Z,1527148063.863 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:47:43.864Z,1527148063.864 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:47:43.864Z,1527148063.864 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:47:43.864Z,1527148063.864 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:47:43.865Z,1527148063.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:48:31.870Z,1527148111.870 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T07:50:44.179Z,1527148244.179 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:50:44.179Z,1527148244.179 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T07:50:44.179Z,1527148244.179 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:50:44.181Z,1527148244.181 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:50:44.181Z,1527148244.181 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T07:50:44.181Z,1527148244.181 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:50:44.193Z,1527148244.193 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:50:44.193Z,1527148244.193 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:50:44.600Z,1527148244.600 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:50:44.600Z,1527148244.600 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T07:50:44.600Z,1527148244.600 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:50:44.600Z,1527148244.600 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T07:50:44.995Z,1527148244.995 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:50:44.995Z,1527148244.995 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:50:44.996Z,1527148244.996 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:50:44.996Z,1527148244.996 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:50:44.996Z,1527148244.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:50:44.997Z,1527148244.997 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:51:24.581Z,1527148284.581 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T07:46:24.3Z
2018-05-24T07:51:24.581Z,1527148284.581 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T07:51:24.581Z,1527148284.581 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T07:51:28.957Z,1527148288.957 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0142.lzma
2018-05-24T07:51:29.759Z,1527148289.759 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0142.lzma.bak
2018-05-24T07:51:29.759Z,1527148289.759 [DataOverHttps](INFO): SBD MOMSN=8291629
2018-05-24T07:51:38.671Z,1527148298.671 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0143.lzma
2018-05-24T07:51:39.439Z,1527148299.439 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0143.lzma.bak
2018-05-24T07:51:39.439Z,1527148299.439 [DataOverHttps](INFO): SBD MOMSN=8291631
2018-05-24T07:51:40.316Z,1527148300.316 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T07:51:40.316Z,1527148300.316 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T07:51:40.316Z,1527148300.316 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T07:53:45.150Z,1527148425.150 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:53:45.150Z,1527148425.150 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T07:53:45.150Z,1527148425.150 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:53:45.151Z,1527148425.151 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:53:45.151Z,1527148425.151 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T07:53:45.152Z,1527148425.152 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:53:45.163Z,1527148425.163 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:53:45.163Z,1527148425.163 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:53:45.565Z,1527148425.565 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:53:45.565Z,1527148425.565 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T07:53:45.566Z,1527148425.566 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:53:45.566Z,1527148425.566 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T07:53:45.956Z,1527148425.956 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:53:45.956Z,1527148425.956 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:53:45.957Z,1527148425.957 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:53:45.957Z,1527148425.957 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:53:45.958Z,1527148425.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:53:45.958Z,1527148425.958 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:56:40.696Z,1527148600.696 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T07:56:40.696Z,1527148600.696 [Default:CheckIn:C.Wait] Stopped
2018-05-24T07:56:40.696Z,1527148600.696 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T07:56:40.696Z,1527148600.696 [Default:CheckIn:D] Running Loop=1
2018-05-24T07:56:41.099Z,1527148601.099 [Default:CheckIn:D] Stopped
2018-05-24T07:56:41.099Z,1527148601.099 [Default:CheckIn:E] Running Loop=1
2018-05-24T07:56:41.494Z,1527148601.494 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 485.049349 min 
2018-05-24T07:56:41.494Z,1527148601.494 [Default:CheckIn:E] Stopped
2018-05-24T07:56:41.495Z,1527148601.495 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T07:56:41.495Z,1527148601.495 [Default:CheckIn] Stopped
2018-05-24T07:56:41.495Z,1527148601.495 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T07:56:41.495Z,1527148601.495 [Default:CheckIn](INFO): Running loop #48
2018-05-24T07:56:41.495Z,1527148601.495 [Default:CheckIn] Running Loop=48
2018-05-24T07:56:41.495Z,1527148601.495 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T07:56:41.495Z,1527148601.495 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T07:56:46.256Z,1527148606.256 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:56:46.256Z,1527148606.256 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T07:56:46.256Z,1527148606.256 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:56:46.258Z,1527148606.258 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:56:46.258Z,1527148606.258 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T07:56:46.258Z,1527148606.258 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:56:46.285Z,1527148606.285 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:56:46.286Z,1527148606.286 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:56:46.667Z,1527148606.667 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:56:46.667Z,1527148606.667 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T07:56:46.667Z,1527148606.667 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:56:46.667Z,1527148606.667 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T07:56:47.059Z,1527148607.059 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:56:47.059Z,1527148607.059 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:56:47.060Z,1527148607.060 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:56:47.060Z,1527148607.060 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:56:47.061Z,1527148607.061 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:56:47.061Z,1527148607.061 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:58:32.249Z,1527148712.249 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T07:59:47.431Z,1527148787.431 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:59:47.432Z,1527148787.432 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T07:59:47.432Z,1527148787.432 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T07:59:47.433Z,1527148787.433 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T07:59:47.433Z,1527148787.433 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T07:59:47.434Z,1527148787.434 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T07:59:47.445Z,1527148787.445 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T07:59:47.445Z,1527148787.445 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T07:59:47.840Z,1527148787.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T07:59:47.840Z,1527148787.840 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T07:59:47.841Z,1527148787.841 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T07:59:47.841Z,1527148787.841 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T07:59:48.231Z,1527148788.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T07:59:48.231Z,1527148788.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:59:48.232Z,1527148788.232 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T07:59:48.232Z,1527148788.232 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T07:59:48.237Z,1527148788.237 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T07:59:48.237Z,1527148788.237 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:01:41.807Z,1527148901.807 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T07:56:41.5Z
2018-05-24T08:01:41.807Z,1527148901.807 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T08:01:41.807Z,1527148901.807 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T08:01:46.144Z,1527148906.144 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0145.lzma
2018-05-24T08:01:46.934Z,1527148906.934 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0145.lzma.bak
2018-05-24T08:01:46.935Z,1527148906.935 [DataOverHttps](INFO): SBD MOMSN=8291634
2018-05-24T08:01:55.802Z,1527148915.802 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0146.lzma
2018-05-24T08:01:56.574Z,1527148916.574 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0146.lzma.bak
2018-05-24T08:01:56.574Z,1527148916.574 [DataOverHttps](INFO): SBD MOMSN=8291636
2018-05-24T08:01:57.623Z,1527148917.623 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T08:01:57.623Z,1527148917.623 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T08:01:57.623Z,1527148917.623 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T08:02:48.483Z,1527148968.483 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:02:48.483Z,1527148968.483 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T08:02:48.483Z,1527148968.483 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:02:48.485Z,1527148968.485 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:02:48.485Z,1527148968.485 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T08:02:48.485Z,1527148968.485 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:02:48.500Z,1527148968.500 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:02:48.500Z,1527148968.500 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:02:48.915Z,1527148968.915 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:02:48.915Z,1527148968.915 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T08:02:48.916Z,1527148968.916 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:02:48.916Z,1527148968.916 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T08:02:49.291Z,1527148969.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:02:49.292Z,1527148969.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:02:49.292Z,1527148969.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:02:49.292Z,1527148969.292 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:02:49.293Z,1527148969.293 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:02:49.293Z,1527148969.293 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:05:49.624Z,1527149149.624 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:05:49.624Z,1527149149.624 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T08:05:49.625Z,1527149149.625 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:05:49.627Z,1527149149.627 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:05:49.627Z,1527149149.627 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T08:05:49.627Z,1527149149.627 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:05:49.639Z,1527149149.639 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:05:49.639Z,1527149149.639 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:05:50.033Z,1527149150.033 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:05:50.033Z,1527149150.033 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T08:05:50.033Z,1527149150.033 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:05:50.034Z,1527149150.034 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T08:05:50.430Z,1527149150.430 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:05:50.431Z,1527149150.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:05:50.431Z,1527149150.431 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:05:50.431Z,1527149150.431 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:05:50.432Z,1527149150.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:05:50.432Z,1527149150.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:06:58.121Z,1527149218.121 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T08:06:58.121Z,1527149218.121 [Default:CheckIn:C.Wait] Stopped
2018-05-24T08:06:58.122Z,1527149218.122 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T08:06:58.122Z,1527149218.122 [Default:CheckIn:D] Running Loop=1
2018-05-24T08:06:58.553Z,1527149218.553 [Default:CheckIn:D] Stopped
2018-05-24T08:06:58.553Z,1527149218.553 [Default:CheckIn:E] Running Loop=1
2018-05-24T08:06:58.923Z,1527149218.923 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 495.340267 min 
2018-05-24T08:06:58.923Z,1527149218.923 [Default:CheckIn:E] Stopped
2018-05-24T08:06:58.923Z,1527149218.923 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T08:06:58.923Z,1527149218.923 [Default:CheckIn] Stopped
2018-05-24T08:06:58.923Z,1527149218.923 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T08:06:58.924Z,1527149218.924 [Default:CheckIn](INFO): Running loop #49
2018-05-24T08:06:58.924Z,1527149218.924 [Default:CheckIn] Running Loop=49
2018-05-24T08:06:58.924Z,1527149218.924 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T08:06:58.924Z,1527149218.924 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T08:08:32.541Z,1527149312.541 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T08:08:50.488Z,1527149330.488 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:08:50.488Z,1527149330.488 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T08:08:50.488Z,1527149330.488 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:08:50.489Z,1527149330.489 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:08:50.490Z,1527149330.490 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T08:08:50.490Z,1527149330.490 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:08:50.501Z,1527149330.501 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:08:50.501Z,1527149330.501 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:08:50.900Z,1527149330.900 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:08:50.900Z,1527149330.900 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T08:08:50.901Z,1527149330.901 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:08:50.901Z,1527149330.901 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T08:08:51.291Z,1527149331.291 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:08:51.291Z,1527149331.291 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:08:51.292Z,1527149331.292 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:08:51.292Z,1527149331.292 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:08:51.292Z,1527149331.292 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:08:51.293Z,1527149331.293 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:11:51.627Z,1527149511.627 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:11:51.627Z,1527149511.627 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T08:11:51.627Z,1527149511.627 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:11:51.628Z,1527149511.628 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:11:51.629Z,1527149511.629 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T08:11:51.629Z,1527149511.629 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:11:51.640Z,1527149511.640 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:11:51.640Z,1527149511.640 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:11:52.042Z,1527149512.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:11:52.042Z,1527149512.042 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T08:11:52.043Z,1527149512.043 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:11:52.043Z,1527149512.043 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T08:11:52.435Z,1527149512.435 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:11:52.435Z,1527149512.435 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:11:52.436Z,1527149512.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:11:52.436Z,1527149512.436 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:11:52.436Z,1527149512.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:11:52.437Z,1527149512.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:11:59.228Z,1527149519.228 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T08:06:58.9Z
2018-05-24T08:11:59.228Z,1527149519.228 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T08:11:59.228Z,1527149519.228 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T08:12:03.594Z,1527149523.594 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0148.lzma
2018-05-24T08:12:04.366Z,1527149524.366 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0148.lzma.bak
2018-05-24T08:12:04.367Z,1527149524.367 [DataOverHttps](INFO): SBD MOMSN=8291639
2018-05-24T08:12:13.206Z,1527149533.206 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0149.lzma
2018-05-24T08:12:14.007Z,1527149534.007 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0149.lzma.bak
2018-05-24T08:12:14.007Z,1527149534.007 [DataOverHttps](INFO): SBD MOMSN=8291641
2018-05-24T08:12:14.892Z,1527149534.892 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T08:12:14.892Z,1527149534.892 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T08:12:14.892Z,1527149534.892 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T08:14:52.463Z,1527149692.463 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:14:52.463Z,1527149692.463 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T08:14:52.464Z,1527149692.464 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:14:52.465Z,1527149692.465 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:14:52.466Z,1527149692.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T08:14:52.466Z,1527149692.466 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:14:52.477Z,1527149692.477 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:14:52.478Z,1527149692.478 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:14:52.882Z,1527149692.882 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:14:52.882Z,1527149692.882 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T08:14:52.882Z,1527149692.882 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:14:52.882Z,1527149692.882 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T08:14:53.279Z,1527149693.279 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:14:53.280Z,1527149693.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:14:53.280Z,1527149693.280 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:14:53.281Z,1527149693.281 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:14:53.282Z,1527149693.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:14:53.282Z,1527149693.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:17:15.226Z,1527149835.226 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T08:17:15.226Z,1527149835.226 [Default:CheckIn:C.Wait] Stopped
2018-05-24T08:17:15.226Z,1527149835.226 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T08:17:15.226Z,1527149835.226 [Default:CheckIn:D] Running Loop=1
2018-05-24T08:17:15.630Z,1527149835.630 [Default:CheckIn:D] Stopped
2018-05-24T08:17:15.630Z,1527149835.630 [Default:CheckIn:E] Running Loop=1
2018-05-24T08:17:16.025Z,1527149836.025 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 505.624870 min 
2018-05-24T08:17:16.025Z,1527149836.025 [Default:CheckIn:E] Stopped
2018-05-24T08:17:16.025Z,1527149836.025 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T08:17:16.026Z,1527149836.026 [Default:CheckIn] Stopped
2018-05-24T08:17:16.026Z,1527149836.026 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T08:17:16.026Z,1527149836.026 [Default:CheckIn](INFO): Running loop #50
2018-05-24T08:17:16.026Z,1527149836.026 [Default:CheckIn] Running Loop=50
2018-05-24T08:17:16.026Z,1527149836.026 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T08:17:16.026Z,1527149836.026 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T08:17:53.605Z,1527149873.605 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:17:53.605Z,1527149873.605 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T08:17:53.605Z,1527149873.605 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:17:53.607Z,1527149873.607 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:17:53.607Z,1527149873.607 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T08:17:53.607Z,1527149873.607 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:17:53.627Z,1527149873.627 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:17:53.627Z,1527149873.627 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:17:54.006Z,1527149874.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:17:54.007Z,1527149874.007 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T08:17:54.007Z,1527149874.007 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:17:54.007Z,1527149874.007 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T08:17:54.388Z,1527149874.388 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:17:54.389Z,1527149874.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:17:54.389Z,1527149874.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:17:54.389Z,1527149874.389 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:17:54.390Z,1527149874.390 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:17:54.390Z,1527149874.390 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:18:32.769Z,1527149912.769 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T08:20:54.706Z,1527150054.706 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:20:54.707Z,1527150054.707 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T08:20:54.707Z,1527150054.707 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:20:54.708Z,1527150054.708 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:20:54.708Z,1527150054.708 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T08:20:54.709Z,1527150054.709 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:20:54.741Z,1527150054.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:20:54.742Z,1527150054.742 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:20:54.742Z,1527150054.742 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:20:54.742Z,1527150054.742 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:22:16.274Z,1527150136.274 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T08:17:16.0Z
2018-05-24T08:22:16.274Z,1527150136.274 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T08:22:16.275Z,1527150136.275 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T08:22:20.630Z,1527150140.630 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0151.lzma
2018-05-24T08:22:21.398Z,1527150141.398 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0151.lzma.bak
2018-05-24T08:22:21.399Z,1527150141.399 [DataOverHttps](INFO): SBD MOMSN=8291644
2018-05-24T08:22:30.390Z,1527150150.390 [DataOverHttps](INFO): Sending 180 bytes from file Logs/20180523T234807/Express0152.lzma
2018-05-24T08:22:31.163Z,1527150151.163 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0152.lzma.bak
2018-05-24T08:22:31.163Z,1527150151.163 [DataOverHttps](INFO): SBD MOMSN=8291646
2018-05-24T08:22:32.039Z,1527150152.039 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T08:22:32.040Z,1527150152.040 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T08:22:32.040Z,1527150152.040 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T08:27:32.424Z,1527150452.424 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T08:27:32.424Z,1527150452.424 [Default:CheckIn:C.Wait] Stopped
2018-05-24T08:27:32.424Z,1527150452.424 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T08:27:32.424Z,1527150452.424 [Default:CheckIn:D] Running Loop=1
2018-05-24T08:27:32.817Z,1527150452.817 [Default:CheckIn:D] Stopped
2018-05-24T08:27:32.817Z,1527150452.817 [Default:CheckIn:E] Running Loop=1
2018-05-24T08:27:33.219Z,1527150453.219 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 515.911328 min 
2018-05-24T08:27:33.219Z,1527150453.219 [Default:CheckIn:E] Stopped
2018-05-24T08:27:33.219Z,1527150453.219 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T08:27:33.219Z,1527150453.219 [Default:CheckIn] Stopped
2018-05-24T08:27:33.219Z,1527150453.219 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T08:27:33.220Z,1527150453.220 [Default:CheckIn](INFO): Running loop #51
2018-05-24T08:27:33.220Z,1527150453.220 [Default:CheckIn] Running Loop=51
2018-05-24T08:27:33.220Z,1527150453.220 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T08:27:33.220Z,1527150453.220 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T08:28:32.806Z,1527150512.806 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T08:32:33.480Z,1527150753.480 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T08:27:33.2Z
2018-05-24T08:32:33.480Z,1527150753.480 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T08:32:33.480Z,1527150753.480 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T08:32:37.839Z,1527150757.839 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0154.lzma
2018-05-24T08:32:38.639Z,1527150758.639 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0154.lzma.bak
2018-05-24T08:32:38.639Z,1527150758.639 [DataOverHttps](INFO): SBD MOMSN=8291651
2018-05-24T08:32:47.511Z,1527150767.511 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0155.lzma
2018-05-24T08:32:48.312Z,1527150768.312 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0155.lzma.bak
2018-05-24T08:32:48.312Z,1527150768.312 [DataOverHttps](INFO): SBD MOMSN=8291653
2018-05-24T08:32:49.187Z,1527150769.187 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T08:32:49.188Z,1527150769.188 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T08:32:49.188Z,1527150769.188 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T08:35:54.731Z,1527150954.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:35:54.731Z,1527150954.731 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T08:35:54.732Z,1527150954.732 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:35:54.732Z,1527150954.732 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T08:35:55.131Z,1527150955.131 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:35:55.132Z,1527150955.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:35:55.132Z,1527150955.132 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:35:55.132Z,1527150955.132 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:35:55.133Z,1527150955.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:35:55.133Z,1527150955.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:37:49.527Z,1527151069.527 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T08:37:49.528Z,1527151069.528 [Default:CheckIn:C.Wait] Stopped
2018-05-24T08:37:49.528Z,1527151069.528 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T08:37:49.528Z,1527151069.528 [Default:CheckIn:D] Running Loop=1
2018-05-24T08:37:49.927Z,1527151069.927 [Default:CheckIn:D] Stopped
2018-05-24T08:37:49.927Z,1527151069.927 [Default:CheckIn:E] Running Loop=1
2018-05-24T08:37:50.326Z,1527151070.326 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 526.196484 min 
2018-05-24T08:37:50.326Z,1527151070.326 [Default:CheckIn:E] Stopped
2018-05-24T08:37:50.327Z,1527151070.327 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T08:37:50.327Z,1527151070.327 [Default:CheckIn] Stopped
2018-05-24T08:37:50.327Z,1527151070.327 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T08:37:50.327Z,1527151070.327 [Default:CheckIn](INFO): Running loop #52
2018-05-24T08:37:50.327Z,1527151070.327 [Default:CheckIn] Running Loop=52
2018-05-24T08:37:50.327Z,1527151070.327 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T08:37:50.327Z,1527151070.327 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T08:38:33.105Z,1527151113.105 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T08:38:55.455Z,1527151135.455 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:38:55.456Z,1527151135.456 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T08:38:55.456Z,1527151135.456 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:38:55.457Z,1527151135.457 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:38:55.458Z,1527151135.458 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T08:38:55.458Z,1527151135.458 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:38:55.482Z,1527151135.482 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:38:55.482Z,1527151135.482 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:38:55.868Z,1527151135.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:38:55.868Z,1527151135.868 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T08:38:55.868Z,1527151135.868 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:38:55.868Z,1527151135.868 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T08:38:56.264Z,1527151136.264 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:38:56.264Z,1527151136.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:38:56.264Z,1527151136.264 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:38:56.265Z,1527151136.265 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:38:56.266Z,1527151136.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:38:56.266Z,1527151136.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:41:56.598Z,1527151316.598 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:41:56.599Z,1527151316.599 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T08:41:56.599Z,1527151316.599 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:41:56.600Z,1527151316.600 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:41:56.600Z,1527151316.600 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T08:41:56.600Z,1527151316.600 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:41:56.618Z,1527151316.618 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:41:56.618Z,1527151316.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:41:57.019Z,1527151317.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:41:57.020Z,1527151317.020 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T08:41:57.020Z,1527151317.020 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:41:57.020Z,1527151317.020 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T08:41:57.405Z,1527151317.405 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:41:57.405Z,1527151317.405 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:41:57.406Z,1527151317.406 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:41:57.406Z,1527151317.406 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:41:57.406Z,1527151317.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:41:57.407Z,1527151317.407 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:42:50.599Z,1527151370.599 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T08:37:50.3Z
2018-05-24T08:42:50.599Z,1527151370.599 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T08:42:50.599Z,1527151370.599 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T08:42:54.954Z,1527151374.954 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0157.lzma
2018-05-24T08:42:55.755Z,1527151375.755 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0157.lzma.bak
2018-05-24T08:42:55.755Z,1527151375.755 [DataOverHttps](INFO): SBD MOMSN=8291656
2018-05-24T08:43:04.594Z,1527151384.594 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0158.lzma
2018-05-24T08:43:05.378Z,1527151385.378 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0158.lzma.bak
2018-05-24T08:43:05.379Z,1527151385.379 [DataOverHttps](INFO): SBD MOMSN=8291658
2018-05-24T08:43:06.241Z,1527151386.241 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T08:43:06.241Z,1527151386.241 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T08:43:06.241Z,1527151386.241 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T08:44:57.441Z,1527151497.441 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:44:57.441Z,1527151497.441 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T08:44:57.442Z,1527151497.442 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:44:57.443Z,1527151497.443 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:44:57.443Z,1527151497.443 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T08:44:57.443Z,1527151497.443 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:44:57.455Z,1527151497.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:44:57.455Z,1527151497.455 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:44:57.854Z,1527151497.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:44:57.854Z,1527151497.854 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T08:44:57.854Z,1527151497.854 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:44:57.854Z,1527151497.854 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T08:44:58.247Z,1527151498.247 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:44:58.247Z,1527151498.247 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:44:58.248Z,1527151498.248 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:44:58.248Z,1527151498.248 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:44:58.248Z,1527151498.248 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:44:58.249Z,1527151498.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:47:58.573Z,1527151678.573 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:47:58.573Z,1527151678.573 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T08:47:58.573Z,1527151678.573 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:47:58.575Z,1527151678.575 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:47:58.575Z,1527151678.575 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T08:47:58.575Z,1527151678.575 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:47:58.587Z,1527151678.587 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:47:58.587Z,1527151678.587 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:47:58.990Z,1527151678.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:47:58.990Z,1527151678.990 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T08:47:58.991Z,1527151678.991 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:47:58.991Z,1527151678.991 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T08:47:59.384Z,1527151679.384 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:47:59.384Z,1527151679.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:47:59.384Z,1527151679.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:47:59.385Z,1527151679.385 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:47:59.385Z,1527151679.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:47:59.386Z,1527151679.386 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:48:06.586Z,1527151686.586 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T08:48:06.586Z,1527151686.586 [Default:CheckIn:C.Wait] Stopped
2018-05-24T08:48:06.586Z,1527151686.586 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T08:48:06.586Z,1527151686.586 [Default:CheckIn:D] Running Loop=1
2018-05-24T08:48:06.977Z,1527151686.977 [Default:CheckIn:D] Stopped
2018-05-24T08:48:06.977Z,1527151686.977 [Default:CheckIn:E] Running Loop=1
2018-05-24T08:48:07.382Z,1527151687.382 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 536.480664 min 
2018-05-24T08:48:07.382Z,1527151687.382 [Default:CheckIn:E] Stopped
2018-05-24T08:48:07.383Z,1527151687.383 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T08:48:07.383Z,1527151687.383 [Default:CheckIn] Stopped
2018-05-24T08:48:07.383Z,1527151687.383 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T08:48:07.383Z,1527151687.383 [Default:CheckIn](INFO): Running loop #53
2018-05-24T08:48:07.383Z,1527151687.383 [Default:CheckIn] Running Loop=53
2018-05-24T08:48:07.383Z,1527151687.383 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T08:48:07.383Z,1527151687.383 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T08:48:33.357Z,1527151713.357 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T08:50:59.682Z,1527151859.682 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:50:59.682Z,1527151859.682 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T08:50:59.682Z,1527151859.682 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:50:59.684Z,1527151859.684 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:50:59.684Z,1527151859.684 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T08:50:59.684Z,1527151859.684 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:50:59.696Z,1527151859.696 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:50:59.696Z,1527151859.696 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:51:00.128Z,1527151860.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:51:00.128Z,1527151860.128 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T08:51:00.128Z,1527151860.128 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:51:00.128Z,1527151860.128 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T08:51:00.476Z,1527151860.476 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:51:00.477Z,1527151860.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:51:00.477Z,1527151860.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:51:00.478Z,1527151860.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:51:00.479Z,1527151860.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:51:00.479Z,1527151860.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:53:07.622Z,1527151987.622 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T08:48:07.4Z
2018-05-24T08:53:07.623Z,1527151987.623 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T08:53:07.623Z,1527151987.623 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T08:53:12.032Z,1527151992.032 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0160.lzma
2018-05-24T08:53:12.822Z,1527151992.822 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0160.lzma.bak
2018-05-24T08:53:12.823Z,1527151992.823 [DataOverHttps](INFO): SBD MOMSN=8291661
2018-05-24T08:53:21.678Z,1527152001.678 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0161.lzma
2018-05-24T08:53:22.455Z,1527152002.455 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0161.lzma.bak
2018-05-24T08:53:22.455Z,1527152002.455 [DataOverHttps](INFO): SBD MOMSN=8291663
2018-05-24T08:53:23.320Z,1527152003.320 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T08:53:23.320Z,1527152003.320 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T08:53:23.320Z,1527152003.320 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T08:54:00.567Z,1527152040.567 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:54:00.567Z,1527152040.567 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T08:54:00.567Z,1527152040.567 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:54:00.569Z,1527152040.569 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:54:00.569Z,1527152040.569 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T08:54:00.569Z,1527152040.569 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:54:00.601Z,1527152040.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:54:00.601Z,1527152040.601 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:54:00.980Z,1527152040.980 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:54:00.980Z,1527152040.980 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T08:54:01.005Z,1527152041.005 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:54:01.005Z,1527152041.005 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T08:54:01.369Z,1527152041.369 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:54:01.370Z,1527152041.370 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:54:01.370Z,1527152041.370 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:54:01.370Z,1527152041.370 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:54:01.371Z,1527152041.371 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:54:01.371Z,1527152041.371 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:56:06.167Z,1527152166.167 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.463194 seconds old.
2018-05-24T08:56:06.168Z,1527152166.168 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.463865 seconds old.
2018-05-24T08:56:06.532Z,1527152166.532 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.827896 seconds old.
2018-05-24T08:56:06.533Z,1527152166.533 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.828299 seconds old.
2018-05-24T08:56:06.923Z,1527152166.923 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.219736 seconds old.
2018-05-24T08:56:06.924Z,1527152166.924 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.220129 seconds old.
2018-05-24T08:56:07.330Z,1527152167.330 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.626201 seconds old.
2018-05-24T08:56:07.331Z,1527152167.331 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.626599 seconds old.
2018-05-24T08:57:01.667Z,1527152221.667 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:57:01.667Z,1527152221.667 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T08:57:01.667Z,1527152221.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T08:57:01.668Z,1527152221.668 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T08:57:01.669Z,1527152221.669 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T08:57:01.669Z,1527152221.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T08:57:01.680Z,1527152221.680 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T08:57:01.680Z,1527152221.680 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T08:57:02.089Z,1527152222.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T08:57:02.089Z,1527152222.089 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T08:57:02.089Z,1527152222.089 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T08:57:02.089Z,1527152222.089 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T08:57:02.468Z,1527152222.468 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T08:57:02.469Z,1527152222.469 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:57:02.470Z,1527152222.470 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:57:02.470Z,1527152222.470 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T08:57:02.471Z,1527152222.471 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T08:57:02.471Z,1527152222.471 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T08:58:23.660Z,1527152303.660 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T08:58:23.660Z,1527152303.660 [Default:CheckIn:C.Wait] Stopped
2018-05-24T08:58:23.660Z,1527152303.660 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T08:58:23.660Z,1527152303.660 [Default:CheckIn:D] Running Loop=1
2018-05-24T08:58:24.067Z,1527152304.067 [Default:CheckIn:D] Stopped
2018-05-24T08:58:24.068Z,1527152304.068 [Default:CheckIn:E] Running Loop=1
2018-05-24T08:58:24.471Z,1527152304.471 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 546.765495 min 
2018-05-24T08:58:24.472Z,1527152304.472 [Default:CheckIn:E] Stopped
2018-05-24T08:58:24.472Z,1527152304.472 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T08:58:24.472Z,1527152304.472 [Default:CheckIn] Stopped
2018-05-24T08:58:24.472Z,1527152304.472 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T08:58:24.472Z,1527152304.472 [Default:CheckIn](INFO): Running loop #54
2018-05-24T08:58:24.472Z,1527152304.472 [Default:CheckIn] Running Loop=54
2018-05-24T08:58:24.472Z,1527152304.472 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T08:58:24.472Z,1527152304.472 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T08:58:33.639Z,1527152313.639 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T09:00:02.797Z,1527152402.797 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:00:02.797Z,1527152402.797 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T09:00:02.797Z,1527152402.797 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:00:02.799Z,1527152402.799 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:00:02.799Z,1527152402.799 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T09:00:02.799Z,1527152402.799 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:00:02.810Z,1527152402.810 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:00:02.811Z,1527152402.811 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:00:03.225Z,1527152403.225 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:00:03.225Z,1527152403.225 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T09:00:03.226Z,1527152403.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:00:03.226Z,1527152403.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T09:00:03.582Z,1527152403.582 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:00:03.583Z,1527152403.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:00:03.583Z,1527152403.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:00:03.583Z,1527152403.583 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:00:03.584Z,1527152403.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:00:03.584Z,1527152403.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:03:03.889Z,1527152583.889 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:03:03.889Z,1527152583.889 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T09:03:03.889Z,1527152583.889 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:03:03.891Z,1527152583.891 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:03:03.891Z,1527152583.891 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T09:03:03.891Z,1527152583.891 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:03:03.902Z,1527152583.902 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:03:03.903Z,1527152583.903 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:03:04.303Z,1527152584.303 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:03:04.303Z,1527152584.303 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T09:03:04.303Z,1527152584.303 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:03:04.303Z,1527152584.303 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T09:03:04.684Z,1527152584.684 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:03:04.684Z,1527152584.684 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:03:04.685Z,1527152584.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:03:04.685Z,1527152584.685 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:03:04.686Z,1527152584.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:03:04.686Z,1527152584.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:03:24.680Z,1527152604.680 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T08:58:24.5Z
2018-05-24T09:03:24.701Z,1527152604.701 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T09:03:24.701Z,1527152604.701 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T09:03:29.035Z,1527152609.035 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180523T234807/Courier0163.lzma
2018-05-24T09:03:29.835Z,1527152609.835 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0163.lzma.bak
2018-05-24T09:03:29.835Z,1527152609.835 [DataOverHttps](INFO): SBD MOMSN=8291666
2018-05-24T09:03:38.681Z,1527152618.681 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0164.lzma
2018-05-24T09:03:39.483Z,1527152619.483 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0164.lzma.bak
2018-05-24T09:03:39.483Z,1527152619.483 [DataOverHttps](INFO): SBD MOMSN=8291668
2018-05-24T09:03:40.367Z,1527152620.367 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T09:03:40.367Z,1527152620.367 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T09:03:40.367Z,1527152620.367 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T09:06:04.746Z,1527152764.746 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:06:04.746Z,1527152764.746 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T09:06:04.746Z,1527152764.746 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:06:04.748Z,1527152764.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:06:04.748Z,1527152764.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T09:06:04.748Z,1527152764.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:06:04.793Z,1527152764.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:06:04.793Z,1527152764.793 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:06:05.210Z,1527152765.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:06:05.210Z,1527152765.210 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T09:06:05.211Z,1527152765.211 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:06:05.211Z,1527152765.211 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T09:06:05.567Z,1527152765.567 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:06:05.568Z,1527152765.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:06:05.568Z,1527152765.568 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:06:05.568Z,1527152765.568 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:06:05.569Z,1527152765.569 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:06:05.569Z,1527152765.569 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:08:33.888Z,1527152913.888 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T09:08:40.690Z,1527152920.690 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T09:08:40.690Z,1527152920.690 [Default:CheckIn:C.Wait] Stopped
2018-05-24T09:08:40.690Z,1527152920.690 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T09:08:40.690Z,1527152920.690 [Default:CheckIn:D] Running Loop=1
2018-05-24T09:08:41.085Z,1527152921.085 [Default:CheckIn:D] Stopped
2018-05-24T09:08:41.086Z,1527152921.086 [Default:CheckIn:E] Running Loop=1
2018-05-24T09:08:41.479Z,1527152921.479 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 557.049154 min 
2018-05-24T09:08:41.479Z,1527152921.479 [Default:CheckIn:E] Stopped
2018-05-24T09:08:41.479Z,1527152921.479 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T09:08:41.479Z,1527152921.479 [Default:CheckIn] Stopped
2018-05-24T09:08:41.479Z,1527152921.479 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T09:08:41.479Z,1527152921.479 [Default:CheckIn](INFO): Running loop #55
2018-05-24T09:08:41.479Z,1527152921.479 [Default:CheckIn] Running Loop=55
2018-05-24T09:08:41.480Z,1527152921.480 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T09:08:41.480Z,1527152921.480 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T09:09:05.838Z,1527152945.838 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:09:05.838Z,1527152945.838 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T09:09:05.838Z,1527152945.838 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:09:05.840Z,1527152945.840 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:09:05.840Z,1527152945.840 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T09:09:05.840Z,1527152945.840 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:09:05.873Z,1527152945.873 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:09:05.874Z,1527152945.874 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:09:06.278Z,1527152946.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:09:06.278Z,1527152946.278 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T09:09:06.278Z,1527152946.278 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:09:06.278Z,1527152946.278 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T09:09:06.640Z,1527152946.640 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:09:06.640Z,1527152946.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:09:06.640Z,1527152946.640 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:09:06.641Z,1527152946.641 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:09:06.641Z,1527152946.641 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:09:06.642Z,1527152946.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:12:06.935Z,1527153126.935 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:12:06.935Z,1527153126.935 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T09:12:06.935Z,1527153126.935 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:12:06.937Z,1527153126.937 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:12:06.937Z,1527153126.937 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T09:12:06.937Z,1527153126.937 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:12:06.974Z,1527153126.974 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:12:06.974Z,1527153126.974 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:12:07.379Z,1527153127.379 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:12:07.379Z,1527153127.379 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T09:12:07.379Z,1527153127.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:12:07.379Z,1527153127.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T09:12:07.735Z,1527153127.735 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:12:07.736Z,1527153127.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:12:07.736Z,1527153127.736 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:12:07.736Z,1527153127.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:12:07.737Z,1527153127.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:12:07.737Z,1527153127.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:13:41.714Z,1527153221.714 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T09:08:41.5Z
2018-05-24T09:13:41.715Z,1527153221.715 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T09:13:41.715Z,1527153221.715 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T09:13:46.089Z,1527153226.089 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0166.lzma
2018-05-24T09:13:46.883Z,1527153226.883 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0166.lzma.bak
2018-05-24T09:13:46.883Z,1527153226.883 [DataOverHttps](INFO): SBD MOMSN=8291671
2018-05-24T09:13:55.765Z,1527153235.765 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0167.lzma
2018-05-24T09:13:56.567Z,1527153236.567 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0167.lzma.bak
2018-05-24T09:13:56.567Z,1527153236.567 [DataOverHttps](INFO): SBD MOMSN=8291673
2018-05-24T09:13:57.467Z,1527153237.467 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T09:13:57.467Z,1527153237.467 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T09:13:57.467Z,1527153237.467 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T09:15:07.854Z,1527153307.854 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:15:07.854Z,1527153307.854 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T09:15:07.854Z,1527153307.854 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:15:07.856Z,1527153307.856 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:15:07.856Z,1527153307.856 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T09:15:07.856Z,1527153307.856 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:15:07.901Z,1527153307.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:15:07.901Z,1527153307.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:15:08.286Z,1527153308.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:15:08.286Z,1527153308.286 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T09:15:08.287Z,1527153308.287 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:15:08.287Z,1527153308.287 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T09:15:08.660Z,1527153308.660 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:15:08.660Z,1527153308.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:15:08.660Z,1527153308.660 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:15:08.661Z,1527153308.661 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:15:08.661Z,1527153308.661 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:15:08.662Z,1527153308.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:18:09.007Z,1527153489.007 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:18:09.007Z,1527153489.007 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T09:18:09.007Z,1527153489.007 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:18:09.009Z,1527153489.009 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:18:09.009Z,1527153489.009 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T09:18:09.009Z,1527153489.009 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:18:09.021Z,1527153489.021 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:18:09.021Z,1527153489.021 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:18:09.426Z,1527153489.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:18:09.426Z,1527153489.426 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T09:18:09.427Z,1527153489.427 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:18:09.427Z,1527153489.427 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T09:18:09.811Z,1527153489.811 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:18:09.812Z,1527153489.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:18:09.812Z,1527153489.812 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:18:09.813Z,1527153489.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:18:09.813Z,1527153489.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:18:09.813Z,1527153489.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:18:34.216Z,1527153514.216 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T09:18:57.813Z,1527153537.813 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T09:18:57.813Z,1527153537.813 [Default:CheckIn:C.Wait] Stopped
2018-05-24T09:18:57.814Z,1527153537.814 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T09:18:57.814Z,1527153537.814 [Default:CheckIn:D] Running Loop=1
2018-05-24T09:18:58.207Z,1527153538.207 [Default:CheckIn:D] Stopped
2018-05-24T09:18:58.207Z,1527153538.207 [Default:CheckIn:E] Running Loop=1
2018-05-24T09:18:58.606Z,1527153538.606 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 567.334505 min 
2018-05-24T09:18:58.606Z,1527153538.606 [Default:CheckIn:E] Stopped
2018-05-24T09:18:58.606Z,1527153538.606 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T09:18:58.606Z,1527153538.606 [Default:CheckIn] Stopped
2018-05-24T09:18:58.606Z,1527153538.606 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T09:18:58.606Z,1527153538.606 [Default:CheckIn](INFO): Running loop #56
2018-05-24T09:18:58.607Z,1527153538.607 [Default:CheckIn] Running Loop=56
2018-05-24T09:18:58.607Z,1527153538.607 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T09:18:58.607Z,1527153538.607 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T09:21:09.839Z,1527153669.839 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:21:09.839Z,1527153669.839 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T09:21:09.840Z,1527153669.840 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:21:09.842Z,1527153669.842 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:21:09.842Z,1527153669.842 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T09:21:09.843Z,1527153669.843 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:21:09.866Z,1527153669.866 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:21:09.866Z,1527153669.866 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:21:10.261Z,1527153670.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:21:10.261Z,1527153670.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T09:21:10.262Z,1527153670.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:21:10.262Z,1527153670.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T09:21:10.648Z,1527153670.648 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:21:10.650Z,1527153670.650 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:21:10.650Z,1527153670.650 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:21:10.650Z,1527153670.650 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:21:10.651Z,1527153670.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:21:10.651Z,1527153670.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:23:59.000Z,1527153839.000 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T09:18:58.6Z
2018-05-24T09:23:59.000Z,1527153839.000 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T09:23:59.001Z,1527153839.001 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T09:24:03.416Z,1527153843.416 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0169.lzma
2018-05-24T09:24:04.219Z,1527153844.219 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0169.lzma.bak
2018-05-24T09:24:04.219Z,1527153844.219 [DataOverHttps](INFO): SBD MOMSN=8291676
2018-05-24T09:24:13.060Z,1527153853.060 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:24:13.060Z,1527153853.060 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T09:24:13.060Z,1527153853.060 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:24:13.062Z,1527153853.062 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:24:13.062Z,1527153853.062 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T09:24:13.062Z,1527153853.062 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:24:13.074Z,1527153853.074 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:24:13.075Z,1527153853.075 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:24:13.124Z,1527153853.124 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0170.lzma
2018-05-24T09:24:13.230Z,1527153853.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:24:13.230Z,1527153853.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T09:24:13.231Z,1527153853.231 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:24:13.231Z,1527153853.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T09:24:13.527Z,1527153853.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:24:13.528Z,1527153853.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:24:13.528Z,1527153853.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:24:13.528Z,1527153853.528 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:24:13.529Z,1527153853.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:24:13.529Z,1527153853.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:24:13.883Z,1527153853.883 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0170.lzma.bak
2018-05-24T09:24:13.883Z,1527153853.883 [DataOverHttps](INFO): SBD MOMSN=8291678
2018-05-24T09:24:14.777Z,1527153854.777 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T09:24:14.777Z,1527153854.777 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T09:24:14.777Z,1527153854.777 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T09:27:13.656Z,1527154033.656 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:27:13.656Z,1527154033.656 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T09:27:13.656Z,1527154033.656 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:27:13.658Z,1527154033.658 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:27:13.658Z,1527154033.658 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T09:27:13.658Z,1527154033.658 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:27:13.670Z,1527154033.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:27:13.671Z,1527154033.671 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:27:14.071Z,1527154034.071 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:27:14.071Z,1527154034.071 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T09:27:14.072Z,1527154034.072 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:27:14.072Z,1527154034.072 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T09:27:14.466Z,1527154034.466 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:27:14.467Z,1527154034.467 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:27:14.468Z,1527154034.468 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:27:14.468Z,1527154034.468 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:27:14.469Z,1527154034.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:27:14.469Z,1527154034.469 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:28:34.512Z,1527154114.512 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T09:29:15.284Z,1527154155.284 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T09:29:15.284Z,1527154155.284 [Default:CheckIn:C.Wait] Stopped
2018-05-24T09:29:15.284Z,1527154155.284 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T09:29:15.284Z,1527154155.284 [Default:CheckIn:D] Running Loop=1
2018-05-24T09:29:15.678Z,1527154155.678 [Default:CheckIn:D] Stopped
2018-05-24T09:29:15.678Z,1527154155.678 [Default:CheckIn:E] Running Loop=1
2018-05-24T09:29:16.075Z,1527154156.075 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 577.625651 min 
2018-05-24T09:29:16.075Z,1527154156.075 [Default:CheckIn:E] Stopped
2018-05-24T09:29:16.075Z,1527154156.075 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T09:29:16.075Z,1527154156.075 [Default:CheckIn] Stopped
2018-05-24T09:29:16.075Z,1527154156.075 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T09:29:16.076Z,1527154156.076 [Default:CheckIn](INFO): Running loop #57
2018-05-24T09:29:16.076Z,1527154156.076 [Default:CheckIn] Running Loop=57
2018-05-24T09:29:16.076Z,1527154156.076 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T09:29:16.076Z,1527154156.076 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T09:30:14.842Z,1527154214.842 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:30:14.842Z,1527154214.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T09:30:14.842Z,1527154214.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:30:14.844Z,1527154214.844 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:30:14.844Z,1527154214.844 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T09:30:14.844Z,1527154214.844 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:30:14.886Z,1527154214.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:30:14.886Z,1527154214.886 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:30:15.286Z,1527154215.286 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:30:15.286Z,1527154215.286 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T09:30:15.286Z,1527154215.286 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:30:15.286Z,1527154215.286 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T09:30:15.640Z,1527154215.640 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:30:15.641Z,1527154215.641 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:30:15.641Z,1527154215.641 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:30:15.642Z,1527154215.642 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:30:15.642Z,1527154215.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:30:15.642Z,1527154215.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:33:15.942Z,1527154395.942 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:33:15.942Z,1527154395.942 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T09:33:15.942Z,1527154395.942 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:33:15.944Z,1527154395.944 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:33:15.944Z,1527154395.944 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T09:33:15.944Z,1527154395.944 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:33:15.977Z,1527154395.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:33:15.977Z,1527154395.977 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:33:16.376Z,1527154396.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:33:16.376Z,1527154396.376 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T09:33:16.377Z,1527154396.377 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:33:16.377Z,1527154396.377 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T09:33:16.741Z,1527154396.741 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:33:16.741Z,1527154396.741 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:33:16.742Z,1527154396.742 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:33:16.742Z,1527154396.742 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:33:16.742Z,1527154396.742 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:33:16.743Z,1527154396.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:34:16.340Z,1527154456.340 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T09:29:16.1Z
2018-05-24T09:34:16.340Z,1527154456.340 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T09:34:16.340Z,1527154456.340 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T09:34:20.671Z,1527154460.671 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0172.lzma
2018-05-24T09:34:21.471Z,1527154461.471 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0172.lzma.bak
2018-05-24T09:34:21.471Z,1527154461.471 [DataOverHttps](INFO): SBD MOMSN=8291681
2018-05-24T09:34:30.368Z,1527154470.368 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0173.lzma
2018-05-24T09:34:31.159Z,1527154471.159 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0173.lzma.bak
2018-05-24T09:34:31.159Z,1527154471.159 [DataOverHttps](INFO): SBD MOMSN=8291683
2018-05-24T09:34:32.068Z,1527154472.068 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T09:34:32.068Z,1527154472.068 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T09:34:32.068Z,1527154472.068 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T09:36:16.888Z,1527154576.888 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:36:16.888Z,1527154576.888 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T09:36:16.888Z,1527154576.888 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:36:16.890Z,1527154576.890 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:36:16.890Z,1527154576.890 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T09:36:16.890Z,1527154576.890 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:36:16.901Z,1527154576.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:36:16.902Z,1527154576.902 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:36:16.902Z,1527154576.902 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:36:16.902Z,1527154576.902 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:38:36.724Z,1527154716.724 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T09:39:32.380Z,1527154772.380 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T09:39:32.380Z,1527154772.380 [Default:CheckIn:C.Wait] Stopped
2018-05-24T09:39:32.380Z,1527154772.380 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T09:39:32.380Z,1527154772.380 [Default:CheckIn:D] Running Loop=1
2018-05-24T09:39:32.779Z,1527154772.779 [Default:CheckIn:D] Stopped
2018-05-24T09:39:32.779Z,1527154772.779 [Default:CheckIn:E] Running Loop=1
2018-05-24T09:39:33.179Z,1527154773.179 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 587.910677 min 
2018-05-24T09:39:33.179Z,1527154773.179 [Default:CheckIn:E] Stopped
2018-05-24T09:39:33.179Z,1527154773.179 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T09:39:33.179Z,1527154773.179 [Default:CheckIn] Stopped
2018-05-24T09:39:33.179Z,1527154773.179 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T09:39:33.179Z,1527154773.179 [Default:CheckIn](INFO): Running loop #58
2018-05-24T09:39:33.180Z,1527154773.180 [Default:CheckIn] Running Loop=58
2018-05-24T09:39:33.180Z,1527154773.180 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T09:39:33.180Z,1527154773.180 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T09:44:33.457Z,1527155073.457 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T09:39:33.2Z
2018-05-24T09:44:33.457Z,1527155073.457 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T09:44:33.457Z,1527155073.457 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T09:44:37.816Z,1527155077.816 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0175.lzma
2018-05-24T09:44:38.590Z,1527155078.590 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0175.lzma.bak
2018-05-24T09:44:38.591Z,1527155078.591 [DataOverHttps](INFO): SBD MOMSN=8291686
2018-05-24T09:44:47.486Z,1527155087.486 [DataOverHttps](INFO): Sending 180 bytes from file Logs/20180523T234807/Express0176.lzma
2018-05-24T09:44:48.255Z,1527155088.255 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0176.lzma.bak
2018-05-24T09:44:48.255Z,1527155088.255 [DataOverHttps](INFO): SBD MOMSN=8291688
2018-05-24T09:44:49.138Z,1527155089.138 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T09:44:49.138Z,1527155089.138 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T09:44:49.138Z,1527155089.138 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T09:48:37.134Z,1527155317.134 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T09:49:49.466Z,1527155389.466 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T09:49:49.467Z,1527155389.467 [Default:CheckIn:C.Wait] Stopped
2018-05-24T09:49:49.467Z,1527155389.467 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T09:49:49.467Z,1527155389.467 [Default:CheckIn:D] Running Loop=1
2018-05-24T09:49:49.873Z,1527155389.873 [Default:CheckIn:D] Stopped
2018-05-24T09:49:49.873Z,1527155389.873 [Default:CheckIn:E] Running Loop=1
2018-05-24T09:49:50.266Z,1527155390.266 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 598.195573 min 
2018-05-24T09:49:50.266Z,1527155390.266 [Default:CheckIn:E] Stopped
2018-05-24T09:49:50.266Z,1527155390.266 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T09:49:50.267Z,1527155390.267 [Default:CheckIn] Stopped
2018-05-24T09:49:50.267Z,1527155390.267 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T09:49:50.267Z,1527155390.267 [Default:CheckIn](INFO): Running loop #59
2018-05-24T09:49:50.267Z,1527155390.267 [Default:CheckIn] Running Loop=59
2018-05-24T09:49:50.267Z,1527155390.267 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T09:49:50.267Z,1527155390.267 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T09:51:17.032Z,1527155477.032 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:51:17.033Z,1527155477.033 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T09:51:17.033Z,1527155477.033 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:51:17.033Z,1527155477.033 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T09:51:17.422Z,1527155477.422 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:51:17.422Z,1527155477.422 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:51:17.423Z,1527155477.423 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:51:17.423Z,1527155477.423 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:51:17.424Z,1527155477.424 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:51:17.424Z,1527155477.424 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:54:17.742Z,1527155657.742 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:54:17.742Z,1527155657.742 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T09:54:17.743Z,1527155657.743 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:54:17.744Z,1527155657.744 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:54:17.744Z,1527155657.744 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T09:54:17.744Z,1527155657.744 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:54:17.772Z,1527155657.772 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:54:17.777Z,1527155657.777 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:54:18.151Z,1527155658.151 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:54:18.151Z,1527155658.151 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T09:54:18.152Z,1527155658.152 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:54:18.152Z,1527155658.152 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T09:54:18.544Z,1527155658.544 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:54:18.545Z,1527155658.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:54:18.545Z,1527155658.545 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:54:18.546Z,1527155658.546 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:54:18.546Z,1527155658.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:54:18.546Z,1527155658.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:54:50.558Z,1527155690.558 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T09:49:50.3Z
2018-05-24T09:54:50.558Z,1527155690.558 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T09:54:50.558Z,1527155690.558 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T09:54:54.898Z,1527155694.898 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0178.lzma
2018-05-24T09:54:55.667Z,1527155695.667 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0178.lzma.bak
2018-05-24T09:54:55.667Z,1527155695.667 [DataOverHttps](INFO): SBD MOMSN=8291693
2018-05-24T09:55:04.525Z,1527155704.525 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0179.lzma
2018-05-24T09:55:05.319Z,1527155705.319 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0179.lzma.bak
2018-05-24T09:55:05.319Z,1527155705.319 [DataOverHttps](INFO): SBD MOMSN=8291695
2018-05-24T09:55:06.206Z,1527155706.206 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T09:55:06.206Z,1527155706.206 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T09:55:06.206Z,1527155706.206 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T09:57:18.771Z,1527155838.771 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:57:18.771Z,1527155838.771 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T09:57:18.771Z,1527155838.771 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T09:57:18.772Z,1527155838.772 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T09:57:18.773Z,1527155838.773 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T09:57:18.773Z,1527155838.773 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T09:57:18.785Z,1527155838.785 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T09:57:18.785Z,1527155838.785 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T09:57:19.189Z,1527155839.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T09:57:19.189Z,1527155839.189 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T09:57:19.189Z,1527155839.189 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T09:57:19.189Z,1527155839.189 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T09:57:19.573Z,1527155839.573 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T09:57:19.574Z,1527155839.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:57:19.574Z,1527155839.574 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:57:19.575Z,1527155839.575 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T09:57:19.575Z,1527155839.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T09:57:19.575Z,1527155839.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T09:58:37.142Z,1527155917.142 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T10:00:06.691Z,1527156006.691 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T10:00:06.692Z,1527156006.692 [Default:CheckIn:C.Wait] Stopped
2018-05-24T10:00:06.692Z,1527156006.692 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T10:00:06.692Z,1527156006.692 [Default:CheckIn:D] Running Loop=1
2018-05-24T10:00:07.092Z,1527156007.092 [Default:CheckIn:D] Stopped
2018-05-24T10:00:07.092Z,1527156007.092 [Default:CheckIn:E] Running Loop=1
2018-05-24T10:00:07.498Z,1527156007.498 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 608.482552 min 
2018-05-24T10:00:07.499Z,1527156007.499 [Default:CheckIn:E] Stopped
2018-05-24T10:00:07.499Z,1527156007.499 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T10:00:07.499Z,1527156007.499 [Default:CheckIn] Stopped
2018-05-24T10:00:07.499Z,1527156007.499 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T10:00:07.499Z,1527156007.499 [Default:CheckIn](INFO): Running loop #60
2018-05-24T10:00:07.499Z,1527156007.499 [Default:CheckIn] Running Loop=60
2018-05-24T10:00:07.499Z,1527156007.499 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T10:00:07.499Z,1527156007.499 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T10:00:19.860Z,1527156019.860 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:00:19.860Z,1527156019.860 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T10:00:19.860Z,1527156019.860 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:00:19.862Z,1527156019.862 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:00:19.862Z,1527156019.862 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T10:00:19.862Z,1527156019.862 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:00:19.894Z,1527156019.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:00:19.894Z,1527156019.894 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:00:20.268Z,1527156020.268 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:00:20.269Z,1527156020.269 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T10:00:20.269Z,1527156020.269 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:00:20.269Z,1527156020.269 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T10:00:20.652Z,1527156020.652 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:00:20.652Z,1527156020.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:00:20.652Z,1527156020.652 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:00:20.653Z,1527156020.653 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:00:20.654Z,1527156020.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:00:20.654Z,1527156020.654 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:03:21.002Z,1527156201.002 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:03:21.003Z,1527156201.003 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T10:03:21.003Z,1527156201.003 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:03:21.004Z,1527156201.004 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:03:21.004Z,1527156201.004 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T10:03:21.005Z,1527156201.005 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:03:21.033Z,1527156201.033 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:03:21.033Z,1527156201.033 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:03:21.450Z,1527156201.450 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:03:21.450Z,1527156201.450 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T10:03:21.451Z,1527156201.451 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:03:21.451Z,1527156201.451 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T10:03:21.800Z,1527156201.800 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:03:21.800Z,1527156201.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:03:21.802Z,1527156201.802 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:03:21.802Z,1527156201.802 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:03:21.803Z,1527156201.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:03:21.803Z,1527156201.803 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:05:07.775Z,1527156307.775 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T10:00:07.5Z
2018-05-24T10:05:07.775Z,1527156307.775 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T10:05:07.775Z,1527156307.775 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T10:05:12.122Z,1527156312.122 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0181.lzma
2018-05-24T10:05:12.899Z,1527156312.899 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0181.lzma.bak
2018-05-24T10:05:12.899Z,1527156312.899 [DataOverHttps](INFO): SBD MOMSN=8291698
2018-05-24T10:05:21.960Z,1527156321.960 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0182.lzma
2018-05-24T10:05:22.763Z,1527156322.763 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0182.lzma.bak
2018-05-24T10:05:22.763Z,1527156322.763 [DataOverHttps](INFO): SBD MOMSN=8291700
2018-05-24T10:05:23.656Z,1527156323.656 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T10:05:23.656Z,1527156323.656 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T10:05:23.656Z,1527156323.656 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T10:06:22.107Z,1527156382.107 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:06:22.107Z,1527156382.107 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T10:06:22.108Z,1527156382.108 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:06:22.109Z,1527156382.109 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:06:22.110Z,1527156382.110 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T10:06:22.110Z,1527156382.110 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:06:22.133Z,1527156382.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:06:22.134Z,1527156382.134 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:06:22.561Z,1527156382.561 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:06:22.561Z,1527156382.561 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T10:06:22.562Z,1527156382.562 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:06:22.562Z,1527156382.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T10:06:22.914Z,1527156382.914 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:06:22.914Z,1527156382.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:06:22.914Z,1527156382.914 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:06:22.915Z,1527156382.915 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:06:22.915Z,1527156382.915 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:06:22.916Z,1527156382.916 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:08:37.261Z,1527156517.261 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T10:09:23.251Z,1527156563.251 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:09:23.251Z,1527156563.251 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T10:09:23.252Z,1527156563.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:09:23.253Z,1527156563.253 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:09:23.254Z,1527156563.254 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T10:09:23.254Z,1527156563.254 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:09:23.265Z,1527156563.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:09:23.266Z,1527156563.266 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:09:23.670Z,1527156563.670 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:09:23.670Z,1527156563.670 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T10:09:23.671Z,1527156563.671 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:09:23.671Z,1527156563.671 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T10:09:24.061Z,1527156564.061 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:09:24.061Z,1527156564.061 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:09:24.062Z,1527156564.062 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:09:24.062Z,1527156564.062 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:09:24.062Z,1527156564.062 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:09:24.063Z,1527156564.063 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:10:24.028Z,1527156624.028 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T10:10:24.028Z,1527156624.028 [Default:CheckIn:C.Wait] Stopped
2018-05-24T10:10:24.028Z,1527156624.028 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T10:10:24.028Z,1527156624.028 [Default:CheckIn:D] Running Loop=1
2018-05-24T10:10:24.430Z,1527156624.430 [Default:CheckIn:D] Stopped
2018-05-24T10:10:24.430Z,1527156624.430 [Default:CheckIn:E] Running Loop=1
2018-05-24T10:10:24.845Z,1527156624.845 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 618.771549 min 
2018-05-24T10:10:24.846Z,1527156624.846 [Default:CheckIn:E] Stopped
2018-05-24T10:10:24.846Z,1527156624.846 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T10:10:24.846Z,1527156624.846 [Default:CheckIn] Stopped
2018-05-24T10:10:24.846Z,1527156624.846 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T10:10:24.846Z,1527156624.846 [Default:CheckIn](INFO): Running loop #61
2018-05-24T10:10:24.846Z,1527156624.846 [Default:CheckIn] Running Loop=61
2018-05-24T10:10:24.846Z,1527156624.846 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T10:10:24.846Z,1527156624.846 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T10:12:24.358Z,1527156744.358 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:12:24.358Z,1527156744.358 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T10:12:24.358Z,1527156744.358 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:12:24.360Z,1527156744.360 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:12:24.360Z,1527156744.360 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T10:12:24.360Z,1527156744.360 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:12:24.372Z,1527156744.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:12:24.372Z,1527156744.372 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:12:24.772Z,1527156744.772 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:12:24.772Z,1527156744.772 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T10:12:24.773Z,1527156744.773 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:12:24.773Z,1527156744.773 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T10:12:25.157Z,1527156745.157 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:12:25.157Z,1527156745.157 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:12:25.158Z,1527156745.158 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:12:25.158Z,1527156745.158 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:12:25.158Z,1527156745.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:12:25.159Z,1527156745.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:15:25.080Z,1527156925.080 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T10:10:24.8Z
2018-05-24T10:15:25.080Z,1527156925.080 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T10:15:25.080Z,1527156925.080 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T10:15:25.484Z,1527156925.484 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:15:25.484Z,1527156925.484 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T10:15:25.484Z,1527156925.484 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:15:25.486Z,1527156925.486 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:15:25.486Z,1527156925.486 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T10:15:25.486Z,1527156925.486 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:15:25.531Z,1527156925.531 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:15:25.531Z,1527156925.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:15:26.131Z,1527156926.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:15:26.132Z,1527156926.132 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T10:15:26.132Z,1527156926.132 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:15:26.132Z,1527156926.132 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T10:15:26.296Z,1527156926.296 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:15:26.296Z,1527156926.296 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:15:26.297Z,1527156926.297 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:15:26.297Z,1527156926.297 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:15:26.298Z,1527156926.298 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:15:26.298Z,1527156926.298 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:15:29.406Z,1527156929.406 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0184.lzma
2018-05-24T10:15:30.207Z,1527156930.207 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0184.lzma.bak
2018-05-24T10:15:30.207Z,1527156930.207 [DataOverHttps](INFO): SBD MOMSN=8291703
2018-05-24T10:15:39.553Z,1527156939.553 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0185.lzma
2018-05-24T10:15:40.323Z,1527156940.323 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0185.lzma.bak
2018-05-24T10:15:40.323Z,1527156940.323 [DataOverHttps](INFO): SBD MOMSN=8291705
2018-05-24T10:15:41.198Z,1527156941.198 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T10:15:41.198Z,1527156941.198 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T10:15:41.198Z,1527156941.198 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T10:18:26.404Z,1527157106.404 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:18:26.404Z,1527157106.404 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T10:18:26.405Z,1527157106.405 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:18:26.406Z,1527157106.406 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:18:26.406Z,1527157106.406 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T10:18:26.406Z,1527157106.406 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:18:26.448Z,1527157106.448 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:18:26.449Z,1527157106.449 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:18:26.815Z,1527157106.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:18:26.815Z,1527157106.815 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T10:18:26.816Z,1527157106.816 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:18:26.816Z,1527157106.816 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T10:18:27.200Z,1527157107.200 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:18:27.200Z,1527157107.200 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:18:27.201Z,1527157107.201 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:18:27.201Z,1527157107.201 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:18:27.202Z,1527157107.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:18:27.202Z,1527157107.202 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:18:37.616Z,1527157117.616 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T10:20:41.557Z,1527157241.557 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T10:20:41.557Z,1527157241.557 [Default:CheckIn:C.Wait] Stopped
2018-05-24T10:20:41.558Z,1527157241.558 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T10:20:41.558Z,1527157241.558 [Default:CheckIn:D] Running Loop=1
2018-05-24T10:20:41.947Z,1527157241.947 [Default:CheckIn:D] Stopped
2018-05-24T10:20:41.947Z,1527157241.947 [Default:CheckIn:E] Running Loop=1
2018-05-24T10:20:42.353Z,1527157242.353 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 629.063477 min 
2018-05-24T10:20:42.353Z,1527157242.353 [Default:CheckIn:E] Stopped
2018-05-24T10:20:42.353Z,1527157242.353 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T10:20:42.353Z,1527157242.353 [Default:CheckIn] Stopped
2018-05-24T10:20:42.353Z,1527157242.353 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T10:20:42.354Z,1527157242.354 [Default:CheckIn](INFO): Running loop #62
2018-05-24T10:20:42.354Z,1527157242.354 [Default:CheckIn] Running Loop=62
2018-05-24T10:20:42.354Z,1527157242.354 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T10:20:42.354Z,1527157242.354 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T10:21:27.523Z,1527157287.523 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:21:27.523Z,1527157287.523 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T10:21:27.523Z,1527157287.523 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:21:27.525Z,1527157287.525 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:21:27.525Z,1527157287.525 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T10:21:27.525Z,1527157287.525 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:21:27.565Z,1527157287.565 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:21:27.565Z,1527157287.565 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:21:27.932Z,1527157287.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:21:27.932Z,1527157287.932 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T10:21:27.932Z,1527157287.932 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:21:27.932Z,1527157287.932 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T10:21:28.322Z,1527157288.322 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:21:28.322Z,1527157288.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:21:28.322Z,1527157288.322 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:21:28.323Z,1527157288.323 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:21:28.323Z,1527157288.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:21:28.323Z,1527157288.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:24:28.652Z,1527157468.652 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:24:28.652Z,1527157468.652 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T10:24:28.652Z,1527157468.652 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:24:28.654Z,1527157468.654 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:24:28.654Z,1527157468.654 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T10:24:28.654Z,1527157468.654 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:24:28.717Z,1527157468.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:24:28.718Z,1527157468.718 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:24:29.057Z,1527157469.057 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:24:29.057Z,1527157469.057 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T10:24:29.057Z,1527157469.057 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:24:29.057Z,1527157469.057 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T10:24:29.449Z,1527157469.449 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:24:29.449Z,1527157469.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:24:29.450Z,1527157469.450 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:24:29.450Z,1527157469.450 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:24:29.450Z,1527157469.450 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:24:29.451Z,1527157469.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:25:42.642Z,1527157542.642 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T10:20:42.4Z
2018-05-24T10:25:42.642Z,1527157542.642 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T10:25:42.642Z,1527157542.642 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T10:25:46.996Z,1527157546.996 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0187.lzma
2018-05-24T10:25:47.795Z,1527157547.795 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0187.lzma.bak
2018-05-24T10:25:47.795Z,1527157547.795 [DataOverHttps](INFO): SBD MOMSN=8291708
2018-05-24T10:25:56.663Z,1527157556.663 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0188.lzma
2018-05-24T10:25:57.454Z,1527157557.454 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0188.lzma.bak
2018-05-24T10:25:57.454Z,1527157557.454 [DataOverHttps](INFO): SBD MOMSN=8291710
2018-05-24T10:25:58.382Z,1527157558.382 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T10:25:58.382Z,1527157558.382 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T10:25:58.382Z,1527157558.382 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T10:27:29.548Z,1527157649.548 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:27:29.548Z,1527157649.548 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T10:27:29.548Z,1527157649.548 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:27:29.550Z,1527157649.550 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:27:29.550Z,1527157649.550 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T10:27:29.550Z,1527157649.550 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:27:29.582Z,1527157649.582 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:27:29.583Z,1527157649.583 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:27:29.959Z,1527157649.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:27:29.959Z,1527157649.959 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T10:27:29.960Z,1527157649.960 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:27:29.960Z,1527157649.960 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T10:27:30.359Z,1527157650.359 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:27:30.359Z,1527157650.359 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:27:30.360Z,1527157650.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:27:30.360Z,1527157650.360 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:27:30.360Z,1527157650.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:27:30.361Z,1527157650.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:28:38.008Z,1527157718.008 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T10:30:30.732Z,1527157830.732 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:30:30.732Z,1527157830.732 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T10:30:30.732Z,1527157830.732 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:30:30.734Z,1527157830.734 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:30:30.734Z,1527157830.734 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T10:30:30.734Z,1527157830.734 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:30:30.746Z,1527157830.746 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:30:30.747Z,1527157830.747 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:30:31.141Z,1527157831.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:30:31.141Z,1527157831.141 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T10:30:31.141Z,1527157831.141 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:30:31.141Z,1527157831.141 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T10:30:31.519Z,1527157831.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:30:31.519Z,1527157831.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:30:31.519Z,1527157831.519 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:30:31.520Z,1527157831.520 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:30:31.520Z,1527157831.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:30:31.521Z,1527157831.521 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:30:58.718Z,1527157858.718 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T10:30:58.718Z,1527157858.718 [Default:CheckIn:C.Wait] Stopped
2018-05-24T10:30:58.718Z,1527157858.718 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T10:30:58.718Z,1527157858.718 [Default:CheckIn:D] Running Loop=1
2018-05-24T10:30:59.117Z,1527157859.117 [Default:CheckIn:D] Stopped
2018-05-24T10:30:59.117Z,1527157859.117 [Default:CheckIn:E] Running Loop=1
2018-05-24T10:30:59.520Z,1527157859.520 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 639.349674 min 
2018-05-24T10:30:59.520Z,1527157859.520 [Default:CheckIn:E] Stopped
2018-05-24T10:30:59.520Z,1527157859.520 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T10:30:59.520Z,1527157859.520 [Default:CheckIn] Stopped
2018-05-24T10:30:59.521Z,1527157859.521 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T10:30:59.521Z,1527157859.521 [Default:CheckIn](INFO): Running loop #63
2018-05-24T10:30:59.521Z,1527157859.521 [Default:CheckIn] Running Loop=63
2018-05-24T10:30:59.521Z,1527157859.521 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T10:30:59.521Z,1527157859.521 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T10:33:31.842Z,1527158011.842 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:33:31.842Z,1527158011.842 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T10:33:31.842Z,1527158011.842 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:33:31.844Z,1527158011.844 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:33:31.844Z,1527158011.844 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T10:33:31.844Z,1527158011.844 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:33:31.880Z,1527158011.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:33:31.880Z,1527158011.880 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:33:32.250Z,1527158012.250 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:33:32.250Z,1527158012.250 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T10:33:32.251Z,1527158012.251 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:33:32.251Z,1527158012.251 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T10:33:32.647Z,1527158012.647 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:33:32.648Z,1527158012.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:33:32.648Z,1527158012.648 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:33:32.648Z,1527158012.648 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:33:32.649Z,1527158012.649 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:33:32.649Z,1527158012.649 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:35:59.813Z,1527158159.813 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T10:30:59.5Z
2018-05-24T10:35:59.814Z,1527158159.814 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T10:35:59.814Z,1527158159.814 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T10:36:07.042Z,1527158167.042 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0190.lzma
2018-05-24T10:36:07.807Z,1527158167.807 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0190.lzma.bak
2018-05-24T10:36:07.807Z,1527158167.807 [DataOverHttps](INFO): SBD MOMSN=8291713
2018-05-24T10:36:18.598Z,1527158178.598 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0191.lzma
2018-05-24T10:36:19.380Z,1527158179.380 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0191.lzma.bak
2018-05-24T10:36:19.380Z,1527158179.380 [DataOverHttps](INFO): SBD MOMSN=8291715
2018-05-24T10:36:20.270Z,1527158180.270 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T10:36:20.270Z,1527158180.270 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T10:36:20.270Z,1527158180.270 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T10:36:32.719Z,1527158192.719 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:36:32.719Z,1527158192.719 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T10:36:32.720Z,1527158192.720 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:36:32.721Z,1527158192.721 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:36:32.721Z,1527158192.721 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T10:36:32.721Z,1527158192.721 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:36:32.753Z,1527158192.753 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:36:32.753Z,1527158192.753 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:36:33.129Z,1527158193.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:36:33.129Z,1527158193.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T10:36:33.130Z,1527158193.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:36:33.130Z,1527158193.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T10:36:33.527Z,1527158193.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:36:33.527Z,1527158193.527 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:36:33.528Z,1527158193.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:36:33.528Z,1527158193.528 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:36:33.528Z,1527158193.528 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:36:33.529Z,1527158193.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:38:38.335Z,1527158318.335 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T10:39:33.851Z,1527158373.851 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:39:33.851Z,1527158373.851 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T10:39:33.851Z,1527158373.851 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:39:33.853Z,1527158373.853 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:39:33.853Z,1527158373.853 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T10:39:33.854Z,1527158373.854 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:39:33.881Z,1527158373.881 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:39:33.882Z,1527158373.882 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:39:34.261Z,1527158374.261 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:39:34.261Z,1527158374.261 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T10:39:34.262Z,1527158374.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:39:34.262Z,1527158374.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T10:39:34.648Z,1527158374.648 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:39:34.649Z,1527158374.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:39:34.649Z,1527158374.649 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:39:34.650Z,1527158374.650 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:39:34.650Z,1527158374.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:39:34.650Z,1527158374.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:41:20.627Z,1527158480.627 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T10:41:20.627Z,1527158480.627 [Default:CheckIn:C.Wait] Stopped
2018-05-24T10:41:20.627Z,1527158480.628 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T10:41:20.628Z,1527158480.628 [Default:CheckIn:D] Running Loop=1
2018-05-24T10:41:21.026Z,1527158481.026 [Default:CheckIn:D] Stopped
2018-05-24T10:41:21.026Z,1527158481.026 [Default:CheckIn:E] Running Loop=1
2018-05-24T10:41:21.427Z,1527158481.427 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 649.714844 min 
2018-05-24T10:41:21.427Z,1527158481.427 [Default:CheckIn:E] Stopped
2018-05-24T10:41:21.427Z,1527158481.427 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T10:41:21.427Z,1527158481.427 [Default:CheckIn] Stopped
2018-05-24T10:41:21.427Z,1527158481.427 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T10:41:21.427Z,1527158481.427 [Default:CheckIn](INFO): Running loop #64
2018-05-24T10:41:21.428Z,1527158481.428 [Default:CheckIn] Running Loop=64
2018-05-24T10:41:21.428Z,1527158481.428 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T10:41:21.428Z,1527158481.428 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T10:42:34.951Z,1527158554.951 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:42:34.951Z,1527158554.951 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T10:42:34.951Z,1527158554.951 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:42:34.952Z,1527158554.952 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:42:34.953Z,1527158554.953 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T10:42:34.953Z,1527158554.953 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:42:34.989Z,1527158554.989 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:42:34.989Z,1527158554.989 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:42:35.362Z,1527158555.362 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:42:35.362Z,1527158555.362 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T10:42:35.362Z,1527158555.362 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:42:35.362Z,1527158555.362 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T10:42:35.763Z,1527158555.763 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:42:35.764Z,1527158555.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:42:35.764Z,1527158555.764 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:42:35.764Z,1527158555.764 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:42:35.765Z,1527158555.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:42:35.765Z,1527158555.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:45:36.088Z,1527158736.088 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:45:36.088Z,1527158736.088 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T10:45:36.088Z,1527158736.088 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:45:36.090Z,1527158736.090 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:45:36.090Z,1527158736.090 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T10:45:36.090Z,1527158736.090 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:45:36.126Z,1527158736.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:45:36.126Z,1527158736.126 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:45:36.521Z,1527158736.521 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:45:36.521Z,1527158736.521 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T10:45:36.522Z,1527158736.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:45:36.522Z,1527158736.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T10:45:36.892Z,1527158736.892 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:45:36.892Z,1527158736.892 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:45:36.893Z,1527158736.893 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:45:36.893Z,1527158736.893 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:45:36.894Z,1527158736.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:45:36.894Z,1527158736.894 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:46:21.736Z,1527158781.736 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T10:41:21.4Z
2018-05-24T10:46:21.736Z,1527158781.736 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T10:46:21.736Z,1527158781.736 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T10:46:26.035Z,1527158786.035 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0193.lzma
2018-05-24T10:46:26.927Z,1527158786.927 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0193.lzma.bak
2018-05-24T10:46:26.927Z,1527158786.927 [DataOverHttps](INFO): SBD MOMSN=8291718
2018-05-24T10:46:35.700Z,1527158795.700 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0194.lzma
2018-05-24T10:46:36.498Z,1527158796.498 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0194.lzma.bak
2018-05-24T10:46:36.499Z,1527158796.499 [DataOverHttps](INFO): SBD MOMSN=8291720
2018-05-24T10:46:37.389Z,1527158797.389 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T10:46:37.389Z,1527158797.389 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T10:46:37.389Z,1527158797.389 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T10:48:37.000Z,1527158917.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:48:37.001Z,1527158917.001 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T10:48:37.001Z,1527158917.001 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:48:37.002Z,1527158917.002 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:48:37.003Z,1527158917.003 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T10:48:37.003Z,1527158917.003 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:48:37.037Z,1527158917.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:48:37.037Z,1527158917.037 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:48:37.411Z,1527158917.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T10:48:37.411Z,1527158917.411 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T10:48:37.412Z,1527158917.412 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T10:48:37.412Z,1527158917.412 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T10:48:37.800Z,1527158917.800 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T10:48:37.800Z,1527158917.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:48:37.800Z,1527158917.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:48:37.801Z,1527158917.801 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T10:48:37.801Z,1527158917.801 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T10:48:37.802Z,1527158917.802 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T10:48:41.314Z,1527158921.314 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T10:51:37.729Z,1527159097.729 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T10:51:37.729Z,1527159097.729 [Default:CheckIn:C.Wait] Stopped
2018-05-24T10:51:37.730Z,1527159097.730 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T10:51:37.730Z,1527159097.730 [Default:CheckIn:D] Running Loop=1
2018-05-24T10:51:38.122Z,1527159098.122 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:51:38.122Z,1527159098.122 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T10:51:38.122Z,1527159098.122 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T10:51:38.123Z,1527159098.123 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T10:51:38.124Z,1527159098.124 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T10:51:38.124Z,1527159098.124 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T10:51:38.125Z,1527159098.125 [Default:CheckIn:D] Stopped
2018-05-24T10:51:38.126Z,1527159098.126 [Default:CheckIn:E] Running Loop=1
2018-05-24T10:51:38.135Z,1527159098.135 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:51:38.136Z,1527159098.136 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T10:51:38.136Z,1527159098.136 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:51:38.136Z,1527159098.136 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T10:51:38.525Z,1527159098.525 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 659.999805 min 
2018-05-24T10:51:38.526Z,1527159098.526 [Default:CheckIn:E] Stopped
2018-05-24T10:51:38.526Z,1527159098.526 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T10:51:38.526Z,1527159098.526 [Default:CheckIn] Stopped
2018-05-24T10:51:38.526Z,1527159098.526 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T10:51:38.526Z,1527159098.526 [Default:CheckIn](INFO): Running loop #65
2018-05-24T10:51:38.526Z,1527159098.526 [Default:CheckIn] Running Loop=65
2018-05-24T10:51:38.526Z,1527159098.526 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T10:51:38.527Z,1527159098.527 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T10:56:38.813Z,1527159398.813 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T10:51:38.5Z
2018-05-24T10:56:38.813Z,1527159398.813 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T10:56:38.813Z,1527159398.813 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T10:56:43.315Z,1527159403.315 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0196.lzma
2018-05-24T10:56:44.114Z,1527159404.114 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0196.lzma.bak
2018-05-24T10:56:44.115Z,1527159404.115 [DataOverHttps](INFO): SBD MOMSN=8291723
2018-05-24T10:56:52.996Z,1527159412.996 [DataOverHttps](INFO): Sending 179 bytes from file Logs/20180523T234807/Express0197.lzma
2018-05-24T10:56:53.794Z,1527159413.794 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0197.lzma.bak
2018-05-24T10:56:53.795Z,1527159413.795 [DataOverHttps](INFO): SBD MOMSN=8291725
2018-05-24T10:56:54.675Z,1527159414.675 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T10:56:54.675Z,1527159414.675 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T10:56:54.675Z,1527159414.675 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T10:58:41.502Z,1527159521.502 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T11:01:55.028Z,1527159715.028 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T11:01:55.028Z,1527159715.028 [Default:CheckIn:C.Wait] Stopped
2018-05-24T11:01:55.045Z,1527159715.045 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T11:01:55.045Z,1527159715.045 [Default:CheckIn:D] Running Loop=1
2018-05-24T11:01:55.432Z,1527159715.432 [Default:CheckIn:D] Stopped
2018-05-24T11:01:55.432Z,1527159715.432 [Default:CheckIn:E] Running Loop=1
2018-05-24T11:01:55.835Z,1527159715.835 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 670.288216 min 
2018-05-24T11:01:55.836Z,1527159715.836 [Default:CheckIn:E] Stopped
2018-05-24T11:01:55.836Z,1527159715.836 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T11:01:55.836Z,1527159715.836 [Default:CheckIn] Stopped
2018-05-24T11:01:55.836Z,1527159715.836 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T11:01:55.836Z,1527159715.836 [Default:CheckIn](INFO): Running loop #66
2018-05-24T11:01:55.836Z,1527159715.836 [Default:CheckIn] Running Loop=66
2018-05-24T11:01:55.836Z,1527159715.836 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T11:01:55.836Z,1527159715.836 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T11:06:38.210Z,1527159998.210 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:06:38.210Z,1527159998.210 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T11:06:38.210Z,1527159998.210 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:06:38.210Z,1527159998.210 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T11:06:38.603Z,1527159998.603 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:06:38.603Z,1527159998.603 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:06:38.604Z,1527159998.604 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:06:38.604Z,1527159998.604 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:06:38.605Z,1527159998.605 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:06:38.605Z,1527159998.605 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:06:56.207Z,1527160016.207 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T11:01:55.8Z
2018-05-24T11:06:56.207Z,1527160016.207 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T11:06:56.207Z,1527160016.207 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T11:07:00.518Z,1527160020.518 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0199.lzma
2018-05-24T11:07:01.318Z,1527160021.318 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0199.lzma.bak
2018-05-24T11:07:01.319Z,1527160021.319 [DataOverHttps](INFO): SBD MOMSN=8291730
2018-05-24T11:07:09.820Z,1527160029.820 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0200.lzma
2018-05-24T11:07:10.618Z,1527160030.618 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0200.lzma.bak
2018-05-24T11:07:10.619Z,1527160030.619 [DataOverHttps](INFO): SBD MOMSN=8291732
2018-05-24T11:07:11.507Z,1527160031.507 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T11:07:11.507Z,1527160031.507 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T11:07:11.508Z,1527160031.508 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T11:08:41.548Z,1527160121.548 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T11:09:38.711Z,1527160178.711 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:09:38.711Z,1527160178.711 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T11:09:38.711Z,1527160178.711 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:09:38.713Z,1527160178.713 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:09:38.713Z,1527160178.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T11:09:38.713Z,1527160178.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:09:38.724Z,1527160178.724 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:09:38.745Z,1527160178.745 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:09:39.124Z,1527160179.124 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:09:39.124Z,1527160179.124 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T11:09:39.124Z,1527160179.124 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:09:39.124Z,1527160179.124 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T11:09:39.515Z,1527160179.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:09:39.516Z,1527160179.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:09:39.516Z,1527160179.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:09:39.516Z,1527160179.516 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:09:39.517Z,1527160179.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:09:39.517Z,1527160179.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:12:11.864Z,1527160331.864 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T11:12:11.865Z,1527160331.865 [Default:CheckIn:C.Wait] Stopped
2018-05-24T11:12:11.865Z,1527160331.865 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T11:12:11.865Z,1527160331.865 [Default:CheckIn:D] Running Loop=1
2018-05-24T11:12:12.266Z,1527160332.266 [Default:CheckIn:D] Stopped
2018-05-24T11:12:12.266Z,1527160332.266 [Default:CheckIn:E] Running Loop=1
2018-05-24T11:12:12.664Z,1527160332.664 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 680.568815 min 
2018-05-24T11:12:12.664Z,1527160332.664 [Default:CheckIn:E] Stopped
2018-05-24T11:12:12.664Z,1527160332.664 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T11:12:12.664Z,1527160332.664 [Default:CheckIn] Stopped
2018-05-24T11:12:12.664Z,1527160332.664 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T11:12:12.664Z,1527160332.664 [Default:CheckIn](INFO): Running loop #67
2018-05-24T11:12:12.664Z,1527160332.664 [Default:CheckIn] Running Loop=67
2018-05-24T11:12:12.665Z,1527160332.665 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T11:12:12.665Z,1527160332.665 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T11:12:39.836Z,1527160359.836 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:12:39.836Z,1527160359.836 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T11:12:39.836Z,1527160359.836 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:12:39.838Z,1527160359.838 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:12:39.838Z,1527160359.838 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T11:12:39.838Z,1527160359.838 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:12:39.889Z,1527160359.889 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:12:39.890Z,1527160359.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:12:40.258Z,1527160360.258 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:12:40.258Z,1527160360.258 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T11:12:40.259Z,1527160360.259 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:12:40.259Z,1527160360.259 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T11:12:40.629Z,1527160360.629 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:12:40.629Z,1527160360.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:12:40.630Z,1527160360.630 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:12:40.630Z,1527160360.630 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:12:40.631Z,1527160360.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:12:40.631Z,1527160360.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:15:40.982Z,1527160540.982 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:15:40.982Z,1527160540.982 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T11:15:40.982Z,1527160540.982 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:15:40.984Z,1527160540.984 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:15:40.984Z,1527160540.984 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T11:15:40.984Z,1527160540.984 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:15:40.995Z,1527160540.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:15:40.996Z,1527160540.996 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:15:41.390Z,1527160541.390 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:15:41.391Z,1527160541.391 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T11:15:41.391Z,1527160541.391 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:15:41.391Z,1527160541.391 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T11:15:41.780Z,1527160541.780 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:15:41.780Z,1527160541.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:15:41.780Z,1527160541.780 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:15:41.781Z,1527160541.781 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:15:41.781Z,1527160541.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:15:41.782Z,1527160541.782 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:17:12.986Z,1527160632.986 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T11:12:12.7Z
2018-05-24T11:17:12.986Z,1527160632.986 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T11:17:12.986Z,1527160632.986 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T11:17:17.320Z,1527160637.320 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0202.lzma
2018-05-24T11:17:18.122Z,1527160638.122 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0202.lzma.bak
2018-05-24T11:17:18.123Z,1527160638.123 [DataOverHttps](INFO): SBD MOMSN=8291735
2018-05-24T11:17:26.979Z,1527160646.979 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0203.lzma
2018-05-24T11:17:27.746Z,1527160647.746 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0203.lzma.bak
2018-05-24T11:17:27.747Z,1527160647.747 [DataOverHttps](INFO): SBD MOMSN=8291737
2018-05-24T11:17:28.626Z,1527160648.626 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T11:17:28.626Z,1527160648.626 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T11:17:28.626Z,1527160648.626 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T11:18:41.820Z,1527160721.820 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:18:41.820Z,1527160721.820 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T11:18:41.820Z,1527160721.820 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:18:41.822Z,1527160721.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:18:41.822Z,1527160721.822 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T11:18:41.822Z,1527160721.822 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:18:41.858Z,1527160721.858 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:18:41.859Z,1527160721.859 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:18:41.859Z,1527160721.859 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T11:18:42.231Z,1527160722.231 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:18:42.231Z,1527160722.231 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T11:18:42.231Z,1527160722.231 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:18:42.231Z,1527160722.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T11:18:42.616Z,1527160722.616 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:18:42.616Z,1527160722.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:18:42.617Z,1527160722.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:18:42.617Z,1527160722.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:18:42.617Z,1527160722.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:18:42.618Z,1527160722.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:21:42.963Z,1527160902.963 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:21:42.963Z,1527160902.963 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T11:21:42.963Z,1527160902.963 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:21:42.965Z,1527160902.965 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:21:42.965Z,1527160902.965 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T11:21:42.965Z,1527160902.965 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:21:42.993Z,1527160902.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:21:42.993Z,1527160902.993 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:21:43.406Z,1527160903.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:21:43.406Z,1527160903.406 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T11:21:43.407Z,1527160903.407 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:21:43.407Z,1527160903.407 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T11:21:43.768Z,1527160903.768 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:21:43.768Z,1527160903.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:21:43.768Z,1527160903.768 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:21:43.769Z,1527160903.769 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:21:43.769Z,1527160903.769 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:21:43.770Z,1527160903.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:22:28.969Z,1527160948.969 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T11:22:28.969Z,1527160948.969 [Default:CheckIn:C.Wait] Stopped
2018-05-24T11:22:28.970Z,1527160948.970 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T11:22:28.970Z,1527160948.970 [Default:CheckIn:D] Running Loop=1
2018-05-24T11:22:29.373Z,1527160949.373 [Default:CheckIn:D] Stopped
2018-05-24T11:22:29.374Z,1527160949.374 [Default:CheckIn:E] Running Loop=1
2018-05-24T11:22:29.768Z,1527160949.768 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 690.853906 min 
2018-05-24T11:22:29.768Z,1527160949.768 [Default:CheckIn:E] Stopped
2018-05-24T11:22:29.768Z,1527160949.768 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T11:22:29.768Z,1527160949.768 [Default:CheckIn] Stopped
2018-05-24T11:22:29.768Z,1527160949.768 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T11:22:29.769Z,1527160949.769 [Default:CheckIn](INFO): Running loop #68
2018-05-24T11:22:29.769Z,1527160949.769 [Default:CheckIn] Running Loop=68
2018-05-24T11:22:29.769Z,1527160949.769 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T11:22:29.769Z,1527160949.769 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T11:24:44.090Z,1527161084.090 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:24:44.090Z,1527161084.090 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T11:24:44.091Z,1527161084.091 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:24:44.092Z,1527161084.092 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:24:44.092Z,1527161084.092 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T11:24:44.092Z,1527161084.092 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:24:44.105Z,1527161084.105 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:24:44.105Z,1527161084.105 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:24:44.511Z,1527161084.511 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:24:44.511Z,1527161084.511 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T11:24:44.512Z,1527161084.512 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:24:44.512Z,1527161084.512 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T11:24:44.897Z,1527161084.897 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:24:44.898Z,1527161084.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:24:44.898Z,1527161084.898 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:24:44.898Z,1527161084.898 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:24:44.899Z,1527161084.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:24:44.899Z,1527161084.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:27:30.065Z,1527161250.065 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T11:22:29.8Z
2018-05-24T11:27:30.065Z,1527161250.065 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T11:27:30.065Z,1527161250.065 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T11:27:34.389Z,1527161254.389 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0205.lzma
2018-05-24T11:27:35.192Z,1527161255.192 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0205.lzma.bak
2018-05-24T11:27:35.192Z,1527161255.192 [DataOverHttps](INFO): SBD MOMSN=8291740
2018-05-24T11:27:44.148Z,1527161264.148 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0206.lzma
2018-05-24T11:27:44.950Z,1527161264.950 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0206.lzma.bak
2018-05-24T11:27:44.951Z,1527161264.951 [DataOverHttps](INFO): SBD MOMSN=8291742
2018-05-24T11:27:45.001Z,1527161265.001 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:27:45.002Z,1527161265.002 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T11:27:45.002Z,1527161265.002 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:27:45.003Z,1527161265.003 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:27:45.003Z,1527161265.003 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T11:27:45.003Z,1527161265.003 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:27:45.046Z,1527161265.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:27:45.047Z,1527161265.047 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:27:45.831Z,1527161265.831 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T11:27:45.831Z,1527161265.831 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T11:27:45.831Z,1527161265.831 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T11:27:45.841Z,1527161265.841 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:27:45.841Z,1527161265.841 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T11:27:45.842Z,1527161265.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:27:45.842Z,1527161265.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T11:27:45.978Z,1527161265.978 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:27:45.979Z,1527161265.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:27:45.979Z,1527161265.979 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:27:45.979Z,1527161265.979 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:27:45.980Z,1527161265.980 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:27:45.980Z,1527161265.980 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:28:41.870Z,1527161321.870 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T11:30:46.215Z,1527161446.215 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:30:46.215Z,1527161446.215 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T11:30:46.215Z,1527161446.215 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:30:46.216Z,1527161446.216 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:30:46.216Z,1527161446.216 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T11:30:46.217Z,1527161446.217 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:30:46.228Z,1527161446.228 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:30:46.229Z,1527161446.229 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:30:46.636Z,1527161446.636 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:30:46.636Z,1527161446.636 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T11:30:46.637Z,1527161446.637 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:30:46.637Z,1527161446.637 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T11:30:47.019Z,1527161447.019 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:30:47.019Z,1527161447.019 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:30:47.020Z,1527161447.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:30:47.020Z,1527161447.020 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:30:47.020Z,1527161447.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:30:47.021Z,1527161447.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:32:46.170Z,1527161566.170 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T11:32:46.170Z,1527161566.170 [Default:CheckIn:C.Wait] Stopped
2018-05-24T11:32:46.170Z,1527161566.170 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T11:32:46.171Z,1527161566.171 [Default:CheckIn:D] Running Loop=1
2018-05-24T11:32:46.567Z,1527161566.567 [Default:CheckIn:D] Stopped
2018-05-24T11:32:46.567Z,1527161566.567 [Default:CheckIn:E] Running Loop=1
2018-05-24T11:32:46.971Z,1527161566.971 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 701.140495 min 
2018-05-24T11:32:46.971Z,1527161566.971 [Default:CheckIn:E] Stopped
2018-05-24T11:32:46.971Z,1527161566.971 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T11:32:46.971Z,1527161566.971 [Default:CheckIn] Stopped
2018-05-24T11:32:46.971Z,1527161566.971 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T11:32:46.972Z,1527161566.972 [Default:CheckIn](INFO): Running loop #69
2018-05-24T11:32:46.972Z,1527161566.972 [Default:CheckIn] Running Loop=69
2018-05-24T11:32:46.972Z,1527161566.972 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T11:32:46.972Z,1527161566.972 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T11:33:47.342Z,1527161627.342 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:33:47.343Z,1527161627.343 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T11:33:47.343Z,1527161627.343 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:33:47.344Z,1527161627.344 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:33:47.344Z,1527161627.344 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T11:33:47.344Z,1527161627.344 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:33:47.356Z,1527161627.356 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:33:47.357Z,1527161627.357 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:33:47.758Z,1527161627.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:33:47.758Z,1527161627.758 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T11:33:47.759Z,1527161627.759 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:33:47.759Z,1527161627.759 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T11:33:48.141Z,1527161628.141 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:33:48.142Z,1527161628.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:33:48.142Z,1527161628.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:33:48.142Z,1527161628.142 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:33:48.143Z,1527161628.143 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:33:48.143Z,1527161628.143 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:36:48.454Z,1527161808.454 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:36:48.454Z,1527161808.454 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T11:36:48.454Z,1527161808.454 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:36:48.456Z,1527161808.456 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:36:48.456Z,1527161808.456 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T11:36:48.456Z,1527161808.456 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:36:48.468Z,1527161808.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:36:48.468Z,1527161808.468 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:36:48.870Z,1527161808.870 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:36:48.870Z,1527161808.870 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T11:36:48.870Z,1527161808.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:36:48.870Z,1527161808.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T11:36:49.265Z,1527161809.265 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:36:49.265Z,1527161809.265 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:36:49.265Z,1527161809.265 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:36:49.266Z,1527161809.266 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:36:49.266Z,1527161809.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:36:49.267Z,1527161809.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:37:47.222Z,1527161867.222 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T11:32:46.0Z
2018-05-24T11:37:47.222Z,1527161867.222 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T11:37:47.222Z,1527161867.222 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T11:37:51.540Z,1527161871.540 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0208.lzma
2018-05-24T11:37:52.342Z,1527161872.342 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0208.lzma.bak
2018-05-24T11:37:52.343Z,1527161872.343 [DataOverHttps](INFO): SBD MOMSN=8291745
2018-05-24T11:38:01.288Z,1527161881.288 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0209.lzma
2018-05-24T11:38:02.086Z,1527161882.086 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0209.lzma.bak
2018-05-24T11:38:02.087Z,1527161882.087 [DataOverHttps](INFO): SBD MOMSN=8291747
2018-05-24T11:38:02.980Z,1527161882.980 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T11:38:02.980Z,1527161882.980 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T11:38:02.980Z,1527161882.980 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T11:38:42.252Z,1527161922.252 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T11:39:49.419Z,1527161989.419 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:39:49.419Z,1527161989.419 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T11:39:49.419Z,1527161989.419 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:39:49.421Z,1527161989.421 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:39:49.421Z,1527161989.421 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T11:39:49.421Z,1527161989.421 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:39:49.432Z,1527161989.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:39:49.433Z,1527161989.433 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:39:49.822Z,1527161989.822 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:39:49.822Z,1527161989.822 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T11:39:49.822Z,1527161989.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:39:49.822Z,1527161989.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T11:39:50.216Z,1527161990.216 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:39:50.217Z,1527161990.217 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:39:50.217Z,1527161990.217 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:39:50.218Z,1527161990.218 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:39:50.218Z,1527161990.218 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:39:50.218Z,1527161990.218 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:42:50.571Z,1527162170.571 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:42:50.571Z,1527162170.571 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T11:42:50.571Z,1527162170.571 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:42:50.572Z,1527162170.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:42:50.573Z,1527162170.573 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T11:42:50.573Z,1527162170.573 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:42:50.585Z,1527162170.585 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:42:50.585Z,1527162170.585 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:42:50.977Z,1527162170.977 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:42:50.977Z,1527162170.977 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T11:42:50.977Z,1527162170.977 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:42:50.977Z,1527162170.977 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T11:42:51.373Z,1527162171.373 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:42:51.374Z,1527162171.374 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:42:51.374Z,1527162171.374 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:42:51.375Z,1527162171.375 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:42:51.375Z,1527162171.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:42:51.375Z,1527162171.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:43:03.383Z,1527162183.383 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T11:43:03.383Z,1527162183.383 [Default:CheckIn:C.Wait] Stopped
2018-05-24T11:43:03.383Z,1527162183.383 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T11:43:03.383Z,1527162183.383 [Default:CheckIn:D] Running Loop=1
2018-05-24T11:43:03.788Z,1527162183.788 [Default:CheckIn:D] Stopped
2018-05-24T11:43:03.788Z,1527162183.788 [Default:CheckIn:E] Running Loop=1
2018-05-24T11:43:04.177Z,1527162184.177 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 711.427474 min 
2018-05-24T11:43:04.177Z,1527162184.177 [Default:CheckIn:E] Stopped
2018-05-24T11:43:04.177Z,1527162184.177 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T11:43:04.177Z,1527162184.177 [Default:CheckIn] Stopped
2018-05-24T11:43:04.178Z,1527162184.178 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T11:43:04.178Z,1527162184.178 [Default:CheckIn](INFO): Running loop #70
2018-05-24T11:43:04.178Z,1527162184.178 [Default:CheckIn] Running Loop=70
2018-05-24T11:43:04.178Z,1527162184.178 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T11:43:04.178Z,1527162184.178 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T11:45:51.688Z,1527162351.688 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:45:51.688Z,1527162351.688 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T11:45:51.688Z,1527162351.688 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:45:51.690Z,1527162351.690 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:45:51.690Z,1527162351.690 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T11:45:51.690Z,1527162351.690 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:45:51.702Z,1527162351.702 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:45:51.702Z,1527162351.702 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:45:52.104Z,1527162352.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:45:52.104Z,1527162352.104 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T11:45:52.105Z,1527162352.105 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:45:52.105Z,1527162352.105 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T11:45:52.494Z,1527162352.494 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:45:52.495Z,1527162352.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:45:52.495Z,1527162352.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:45:52.495Z,1527162352.495 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:45:52.496Z,1527162352.496 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:45:52.496Z,1527162352.496 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:48:04.545Z,1527162484.545 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T11:43:04.2Z
2018-05-24T11:48:04.545Z,1527162484.545 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T11:48:04.545Z,1527162484.545 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T11:48:08.957Z,1527162488.957 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0211.lzma
2018-05-24T11:48:09.722Z,1527162489.722 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0211.lzma.bak
2018-05-24T11:48:09.723Z,1527162489.723 [DataOverHttps](INFO): SBD MOMSN=8291750
2018-05-24T11:48:18.575Z,1527162498.575 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0212.lzma
2018-05-24T11:48:19.374Z,1527162499.374 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0212.lzma.bak
2018-05-24T11:48:19.375Z,1527162499.375 [DataOverHttps](INFO): SBD MOMSN=8291752
2018-05-24T11:48:20.263Z,1527162500.263 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T11:48:20.263Z,1527162500.263 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T11:48:20.263Z,1527162500.263 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T11:48:42.328Z,1527162522.328 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T11:48:52.716Z,1527162532.716 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:48:52.716Z,1527162532.716 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T11:48:52.716Z,1527162532.716 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:48:52.718Z,1527162532.718 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:48:52.718Z,1527162532.718 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T11:48:52.718Z,1527162532.718 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:48:52.762Z,1527162532.762 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:48:52.762Z,1527162532.762 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:48:53.139Z,1527162533.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:48:53.140Z,1527162533.140 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T11:48:53.140Z,1527162533.140 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:48:53.140Z,1527162533.140 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T11:48:53.516Z,1527162533.516 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:48:53.516Z,1527162533.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:48:53.516Z,1527162533.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:48:53.517Z,1527162533.517 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:48:53.517Z,1527162533.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:48:53.518Z,1527162533.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:49:03.928Z,1527162543.928 [CBIT](IMPORTANT): Beginning ground fault scan
2018-05-24T11:49:14.719Z,1527162554.719 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135145
CHAN A1 (24V): -0.002997
CHAN A2 (12V): -0.002541
CHAN A3 (5V): -0.001109
CHAN B0 (3.3V): -0.000093
CHAN B1 (3.15aV): -0.000311
CHAN B2 (3.15bV): -0.000655
CHAN B3 (GND): -0.000141
OPEN: -0.000439
Full Scale Calc: 4.765 mA, -1.589 mA
2018-05-24T11:51:53.911Z,1527162713.911 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:51:53.911Z,1527162713.911 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T11:51:53.911Z,1527162713.911 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:51:53.913Z,1527162713.913 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:51:53.913Z,1527162713.913 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T11:51:53.913Z,1527162713.913 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:51:53.945Z,1527162713.945 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:51:53.945Z,1527162713.945 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:51:54.320Z,1527162714.320 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:51:54.321Z,1527162714.321 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T11:51:54.321Z,1527162714.321 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:51:54.321Z,1527162714.321 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T11:51:54.712Z,1527162714.712 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:51:54.712Z,1527162714.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:51:54.712Z,1527162714.712 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:51:54.713Z,1527162714.713 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:51:54.713Z,1527162714.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:51:54.714Z,1527162714.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:53:20.691Z,1527162800.691 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T11:53:20.691Z,1527162800.691 [Default:CheckIn:C.Wait] Stopped
2018-05-24T11:53:20.691Z,1527162800.691 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T11:53:20.691Z,1527162800.691 [Default:CheckIn:D] Running Loop=1
2018-05-24T11:53:21.093Z,1527162801.093 [Default:CheckIn:D] Stopped
2018-05-24T11:53:21.093Z,1527162801.093 [Default:CheckIn:E] Running Loop=1
2018-05-24T11:53:21.490Z,1527162801.490 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 721.715951 min 
2018-05-24T11:53:21.491Z,1527162801.491 [Default:CheckIn:E] Stopped
2018-05-24T11:53:21.491Z,1527162801.491 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T11:53:21.491Z,1527162801.491 [Default:CheckIn] Stopped
2018-05-24T11:53:21.491Z,1527162801.491 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T11:53:21.491Z,1527162801.491 [Default:CheckIn](INFO): Running loop #71
2018-05-24T11:53:21.491Z,1527162801.491 [Default:CheckIn] Running Loop=71
2018-05-24T11:53:21.491Z,1527162801.491 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T11:53:21.491Z,1527162801.491 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T11:54:55.052Z,1527162895.052 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:54:55.052Z,1527162895.052 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T11:54:55.052Z,1527162895.052 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:54:55.054Z,1527162895.054 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:54:55.054Z,1527162895.054 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T11:54:55.054Z,1527162895.054 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:54:55.066Z,1527162895.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:54:55.066Z,1527162895.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:54:55.456Z,1527162895.456 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:54:55.456Z,1527162895.456 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T11:54:55.457Z,1527162895.457 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:54:55.457Z,1527162895.457 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T11:54:55.852Z,1527162895.852 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:54:55.852Z,1527162895.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:54:55.852Z,1527162895.852 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:54:55.853Z,1527162895.853 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:54:55.853Z,1527162895.853 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:54:55.854Z,1527162895.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:57:56.204Z,1527163076.204 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:57:56.205Z,1527163076.205 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T11:57:56.205Z,1527163076.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T11:57:56.206Z,1527163076.206 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T11:57:56.207Z,1527163076.207 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T11:57:56.207Z,1527163076.207 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T11:57:56.219Z,1527163076.219 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T11:57:56.219Z,1527163076.219 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T11:57:56.627Z,1527163076.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T11:57:56.627Z,1527163076.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T11:57:56.628Z,1527163076.628 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T11:57:56.628Z,1527163076.628 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T11:57:57.011Z,1527163077.011 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T11:57:57.011Z,1527163077.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:57:57.012Z,1527163077.012 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:57:57.012Z,1527163077.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T11:57:57.012Z,1527163077.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T11:57:57.013Z,1527163077.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T11:58:21.810Z,1527163101.810 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T11:53:21.5Z
2018-05-24T11:58:21.810Z,1527163101.810 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T11:58:21.810Z,1527163101.810 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T11:58:26.133Z,1527163106.133 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180523T234807/Courier0214.lzma
2018-05-24T11:58:26.934Z,1527163106.934 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0214.lzma.bak
2018-05-24T11:58:26.935Z,1527163106.935 [DataOverHttps](INFO): SBD MOMSN=8291755
2018-05-24T11:58:35.816Z,1527163115.816 [DataOverHttps](INFO): Sending 283 bytes from file Logs/20180523T234807/Express0215.lzma
2018-05-24T11:58:36.578Z,1527163116.578 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0215.lzma.bak
2018-05-24T11:58:36.579Z,1527163116.579 [DataOverHttps](INFO): SBD MOMSN=8291757
2018-05-24T11:58:37.549Z,1527163117.549 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T11:58:37.549Z,1527163117.549 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T11:58:37.549Z,1527163117.549 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T11:58:42.405Z,1527163122.405 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T12:00:57.128Z,1527163257.128 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:00:57.128Z,1527163257.128 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T12:00:57.128Z,1527163257.128 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:00:57.130Z,1527163257.130 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:00:57.130Z,1527163257.130 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T12:00:57.131Z,1527163257.131 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:00:57.164Z,1527163257.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:00:57.164Z,1527163257.164 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:00:57.535Z,1527163257.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:00:57.535Z,1527163257.535 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T12:00:57.536Z,1527163257.536 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:00:57.536Z,1527163257.536 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T12:00:57.925Z,1527163257.925 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:00:57.925Z,1527163257.925 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:00:57.926Z,1527163257.926 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:00:57.926Z,1527163257.926 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:00:57.927Z,1527163257.927 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:00:57.927Z,1527163257.927 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:03:37.892Z,1527163417.892 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T12:03:37.892Z,1527163417.892 [Default:CheckIn:C.Wait] Stopped
2018-05-24T12:03:37.892Z,1527163417.892 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T12:03:37.892Z,1527163417.892 [Default:CheckIn:D] Running Loop=1
2018-05-24T12:03:38.294Z,1527163418.294 [Default:CheckIn:D] Stopped
2018-05-24T12:03:38.294Z,1527163418.294 [Default:CheckIn:E] Running Loop=1
2018-05-24T12:03:38.692Z,1527163418.692 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 732.002604 min 
2018-05-24T12:03:38.693Z,1527163418.693 [Default:CheckIn:E] Stopped
2018-05-24T12:03:38.693Z,1527163418.693 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T12:03:38.693Z,1527163418.693 [Default:CheckIn] Stopped
2018-05-24T12:03:38.693Z,1527163418.693 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T12:03:38.693Z,1527163418.693 [Default:CheckIn](INFO): Running loop #72
2018-05-24T12:03:38.693Z,1527163418.693 [Default:CheckIn] Running Loop=72
2018-05-24T12:03:38.694Z,1527163418.694 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T12:03:38.694Z,1527163418.694 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T12:03:58.254Z,1527163438.254 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:03:58.254Z,1527163438.254 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T12:03:58.254Z,1527163438.254 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:03:58.256Z,1527163438.256 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:03:58.256Z,1527163438.256 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T12:03:58.256Z,1527163438.256 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:03:58.284Z,1527163438.284 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:03:58.284Z,1527163438.284 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:03:58.668Z,1527163438.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:03:58.668Z,1527163438.668 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T12:03:58.668Z,1527163438.668 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:03:58.668Z,1527163438.668 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T12:03:59.072Z,1527163439.072 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:03:59.073Z,1527163439.073 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:03:59.073Z,1527163439.073 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:03:59.080Z,1527163439.080 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:03:59.082Z,1527163439.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:03:59.083Z,1527163439.083 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:06:59.424Z,1527163619.424 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:06:59.424Z,1527163619.424 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T12:06:59.424Z,1527163619.424 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:06:59.426Z,1527163619.426 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:06:59.426Z,1527163619.426 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T12:06:59.426Z,1527163619.426 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:06:59.437Z,1527163619.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:06:59.438Z,1527163619.438 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:06:59.438Z,1527163619.438 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:06:59.438Z,1527163619.438 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:08:38.984Z,1527163718.984 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T12:03:38.7Z
2018-05-24T12:08:38.984Z,1527163718.984 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T12:08:38.984Z,1527163718.984 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T12:08:43.295Z,1527163723.295 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T12:08:43.306Z,1527163723.306 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0217.lzma
2018-05-24T12:08:44.106Z,1527163724.106 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0217.lzma.bak
2018-05-24T12:08:44.107Z,1527163724.107 [DataOverHttps](INFO): SBD MOMSN=8291762
2018-05-24T12:08:53.263Z,1527163733.263 [DataOverHttps](INFO): Sending 180 bytes from file Logs/20180523T234807/Express0218.lzma
2018-05-24T12:08:54.062Z,1527163734.062 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0218.lzma.bak
2018-05-24T12:08:54.063Z,1527163734.063 [DataOverHttps](INFO): SBD MOMSN=8291764
2018-05-24T12:08:54.959Z,1527163734.959 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T12:08:54.959Z,1527163734.959 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T12:08:54.959Z,1527163734.959 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T12:14:00.070Z,1527164040.070 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T12:14:00.070Z,1527164040.070 [Default:CheckIn:C.Wait] Stopped
2018-05-24T12:14:00.071Z,1527164040.071 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T12:14:00.071Z,1527164040.071 [Default:CheckIn:D] Running Loop=1
2018-05-24T12:14:00.204Z,1527164040.204 [Default:CheckIn:D] Stopped
2018-05-24T12:14:00.204Z,1527164040.204 [Default:CheckIn:E] Running Loop=1
2018-05-24T12:14:00.560Z,1527164040.560 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 742.367773 min 
2018-05-24T12:14:00.560Z,1527164040.560 [Default:CheckIn:E] Stopped
2018-05-24T12:14:00.560Z,1527164040.560 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T12:14:00.561Z,1527164040.561 [Default:CheckIn] Stopped
2018-05-24T12:14:00.561Z,1527164040.561 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T12:14:00.561Z,1527164040.561 [Default:CheckIn](INFO): Running loop #73
2018-05-24T12:14:00.561Z,1527164040.561 [Default:CheckIn] Running Loop=73
2018-05-24T12:14:00.561Z,1527164040.561 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T12:14:00.561Z,1527164040.561 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T12:18:43.304Z,1527164323.304 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T12:19:01.565Z,1527164341.565 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T12:14:00.6Z
2018-05-24T12:19:01.565Z,1527164341.565 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T12:19:01.565Z,1527164341.565 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T12:19:06.375Z,1527164346.375 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0220.lzma
2018-05-24T12:19:07.175Z,1527164347.175 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0220.lzma.bak
2018-05-24T12:19:07.175Z,1527164347.175 [DataOverHttps](INFO): SBD MOMSN=8291769
2018-05-24T12:19:16.048Z,1527164356.048 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180523T234807/Express0221.lzma
2018-05-24T12:19:16.854Z,1527164356.854 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0221.lzma.bak
2018-05-24T12:19:16.854Z,1527164356.854 [DataOverHttps](INFO): SBD MOMSN=8291771
2018-05-24T12:19:17.742Z,1527164357.742 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T12:19:17.742Z,1527164357.742 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T12:19:17.742Z,1527164357.742 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T12:21:59.764Z,1527164519.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:21:59.764Z,1527164519.764 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T12:21:59.765Z,1527164519.765 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:21:59.765Z,1527164519.765 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T12:22:00.153Z,1527164520.153 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:22:00.153Z,1527164520.153 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:22:00.154Z,1527164520.154 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:22:00.154Z,1527164520.154 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:22:00.155Z,1527164520.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:22:00.155Z,1527164520.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:24:18.100Z,1527164658.100 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T12:24:18.100Z,1527164658.100 [Default:CheckIn:C.Wait] Stopped
2018-05-24T12:24:18.100Z,1527164658.100 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T12:24:18.100Z,1527164658.100 [Default:CheckIn:D] Running Loop=1
2018-05-24T12:24:18.499Z,1527164658.499 [Default:CheckIn:D] Stopped
2018-05-24T12:24:18.499Z,1527164658.499 [Default:CheckIn:E] Running Loop=1
2018-05-24T12:24:18.902Z,1527164658.902 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 752.672656 min 
2018-05-24T12:24:18.903Z,1527164658.903 [Default:CheckIn:E] Stopped
2018-05-24T12:24:18.903Z,1527164658.903 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T12:24:18.903Z,1527164658.903 [Default:CheckIn] Stopped
2018-05-24T12:24:18.903Z,1527164658.903 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T12:24:18.903Z,1527164658.903 [Default:CheckIn](INFO): Running loop #74
2018-05-24T12:24:18.903Z,1527164658.903 [Default:CheckIn] Running Loop=74
2018-05-24T12:24:18.903Z,1527164658.903 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T12:24:18.904Z,1527164658.904 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T12:25:00.469Z,1527164700.469 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:25:00.469Z,1527164700.469 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T12:25:00.469Z,1527164700.469 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:25:00.471Z,1527164700.471 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:25:00.471Z,1527164700.471 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T12:25:00.471Z,1527164700.471 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:25:00.520Z,1527164700.520 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:25:00.520Z,1527164700.520 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:25:00.872Z,1527164700.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:25:00.872Z,1527164700.872 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T12:25:00.873Z,1527164700.873 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:25:00.873Z,1527164700.873 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T12:25:01.275Z,1527164701.275 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:25:01.276Z,1527164701.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:25:01.276Z,1527164701.276 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:25:01.276Z,1527164701.276 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:25:01.277Z,1527164701.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:25:01.277Z,1527164701.277 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:28:01.584Z,1527164881.584 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:28:01.584Z,1527164881.584 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T12:28:01.584Z,1527164881.584 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:28:01.586Z,1527164881.586 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:28:01.586Z,1527164881.586 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T12:28:01.586Z,1527164881.586 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:28:01.597Z,1527164881.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:28:01.598Z,1527164881.598 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:28:01.990Z,1527164881.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:28:01.990Z,1527164881.990 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T12:28:01.990Z,1527164881.990 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:28:01.990Z,1527164881.990 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T12:28:02.383Z,1527164882.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:28:02.383Z,1527164882.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:28:02.384Z,1527164882.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:28:02.384Z,1527164882.384 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:28:02.384Z,1527164882.384 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:28:02.385Z,1527164882.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:28:43.323Z,1527164923.323 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T12:29:18.911Z,1527164958.911 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T12:24:18.9Z
2018-05-24T12:29:18.911Z,1527164958.911 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T12:29:18.911Z,1527164958.911 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T12:29:23.235Z,1527164963.235 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0223.lzma
2018-05-24T12:29:24.034Z,1527164964.034 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0223.lzma.bak
2018-05-24T12:29:24.035Z,1527164964.035 [DataOverHttps](INFO): SBD MOMSN=8291774
2018-05-24T12:29:32.934Z,1527164972.934 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0224.lzma
2018-05-24T12:29:33.718Z,1527164973.718 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0224.lzma.bak
2018-05-24T12:29:33.719Z,1527164973.719 [DataOverHttps](INFO): SBD MOMSN=8291776
2018-05-24T12:29:34.624Z,1527164974.624 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T12:29:34.624Z,1527164974.624 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T12:29:34.624Z,1527164974.624 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T12:31:02.648Z,1527165062.648 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:31:02.648Z,1527165062.648 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T12:31:02.648Z,1527165062.648 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:31:02.650Z,1527165062.650 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:31:02.650Z,1527165062.650 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T12:31:02.650Z,1527165062.650 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:31:02.662Z,1527165062.662 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:31:02.663Z,1527165062.663 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:31:03.058Z,1527165063.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:31:03.058Z,1527165063.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T12:31:03.058Z,1527165063.058 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:31:03.058Z,1527165063.058 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T12:31:03.443Z,1527165063.443 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:31:03.443Z,1527165063.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:31:03.443Z,1527165063.443 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:31:03.444Z,1527165063.444 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:31:03.444Z,1527165063.444 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:31:03.445Z,1527165063.445 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:34:03.760Z,1527165243.760 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:34:03.760Z,1527165243.760 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T12:34:03.760Z,1527165243.760 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:34:03.762Z,1527165243.762 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:34:03.762Z,1527165243.762 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T12:34:03.762Z,1527165243.762 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:34:03.773Z,1527165243.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:34:03.774Z,1527165243.774 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:34:04.174Z,1527165244.174 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:34:04.174Z,1527165244.174 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T12:34:04.174Z,1527165244.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:34:04.174Z,1527165244.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T12:34:04.557Z,1527165244.557 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:34:04.558Z,1527165244.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:34:04.558Z,1527165244.558 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:34:04.558Z,1527165244.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:34:04.559Z,1527165244.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:34:04.559Z,1527165244.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:34:34.956Z,1527165274.956 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T12:34:34.956Z,1527165274.956 [Default:CheckIn:C.Wait] Stopped
2018-05-24T12:34:34.956Z,1527165274.956 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T12:34:34.957Z,1527165274.957 [Default:CheckIn:D] Running Loop=1
2018-05-24T12:34:35.355Z,1527165275.355 [Default:CheckIn:D] Stopped
2018-05-24T12:34:35.356Z,1527165275.356 [Default:CheckIn:E] Running Loop=1
2018-05-24T12:34:35.756Z,1527165275.756 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 762.953646 min 
2018-05-24T12:34:35.756Z,1527165275.756 [Default:CheckIn:E] Stopped
2018-05-24T12:34:35.756Z,1527165275.756 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T12:34:35.756Z,1527165275.756 [Default:CheckIn] Stopped
2018-05-24T12:34:35.756Z,1527165275.756 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T12:34:35.756Z,1527165275.756 [Default:CheckIn](INFO): Running loop #75
2018-05-24T12:34:35.757Z,1527165275.757 [Default:CheckIn] Running Loop=75
2018-05-24T12:34:35.757Z,1527165275.757 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T12:34:35.757Z,1527165275.757 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T12:37:04.900Z,1527165424.900 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:37:04.900Z,1527165424.900 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T12:37:04.900Z,1527165424.900 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:37:04.902Z,1527165424.902 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:37:04.902Z,1527165424.902 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T12:37:04.902Z,1527165424.902 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:37:04.961Z,1527165424.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:37:04.962Z,1527165424.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:37:05.312Z,1527165425.312 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:37:05.312Z,1527165425.312 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T12:37:05.312Z,1527165425.312 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:37:05.313Z,1527165425.313 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T12:37:05.696Z,1527165425.696 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:37:05.696Z,1527165425.696 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:37:05.697Z,1527165425.697 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:37:05.697Z,1527165425.697 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:37:05.698Z,1527165425.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:37:05.698Z,1527165425.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:38:43.695Z,1527165523.695 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T12:39:36.069Z,1527165576.069 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T12:34:35.8Z
2018-05-24T12:39:36.069Z,1527165576.069 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T12:39:36.069Z,1527165576.069 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T12:39:40.392Z,1527165580.392 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0226.lzma
2018-05-24T12:39:41.194Z,1527165581.194 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0226.lzma.bak
2018-05-24T12:39:41.195Z,1527165581.195 [DataOverHttps](INFO): SBD MOMSN=8291779
2018-05-24T12:39:50.114Z,1527165590.114 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0227.lzma
2018-05-24T12:39:50.906Z,1527165590.906 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0227.lzma.bak
2018-05-24T12:39:50.907Z,1527165590.907 [DataOverHttps](INFO): SBD MOMSN=8291781
2018-05-24T12:39:51.850Z,1527165591.850 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T12:39:51.850Z,1527165591.850 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T12:39:51.850Z,1527165591.850 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T12:40:05.907Z,1527165605.907 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:40:05.907Z,1527165605.907 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T12:40:05.907Z,1527165605.907 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:40:05.910Z,1527165605.910 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:40:05.910Z,1527165605.910 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T12:40:05.910Z,1527165605.910 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:40:05.922Z,1527165605.922 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:40:05.922Z,1527165605.922 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:40:06.325Z,1527165606.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:40:06.326Z,1527165606.326 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T12:40:06.326Z,1527165606.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:40:06.326Z,1527165606.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T12:40:06.706Z,1527165606.706 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:40:06.707Z,1527165606.707 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:40:06.707Z,1527165606.707 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:40:06.708Z,1527165606.708 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:40:06.708Z,1527165606.708 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:40:06.710Z,1527165606.710 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:43:07.020Z,1527165787.020 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:43:07.020Z,1527165787.020 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T12:43:07.020Z,1527165787.020 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:43:07.022Z,1527165787.022 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:43:07.022Z,1527165787.022 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T12:43:07.022Z,1527165787.022 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:43:07.034Z,1527165787.034 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:43:07.034Z,1527165787.034 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:43:07.436Z,1527165787.436 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:43:07.436Z,1527165787.436 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T12:43:07.436Z,1527165787.436 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:43:07.436Z,1527165787.436 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T12:43:07.827Z,1527165787.827 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:43:07.828Z,1527165787.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:43:07.828Z,1527165787.828 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:43:07.828Z,1527165787.828 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:43:07.829Z,1527165787.829 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:43:07.829Z,1527165787.829 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:44:52.190Z,1527165892.190 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T12:44:52.191Z,1527165892.191 [Default:CheckIn:C.Wait] Stopped
2018-05-24T12:44:52.191Z,1527165892.191 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T12:44:52.191Z,1527165892.191 [Default:CheckIn:D] Running Loop=1
2018-05-24T12:44:52.588Z,1527165892.588 [Default:CheckIn:D] Stopped
2018-05-24T12:44:52.588Z,1527165892.588 [Default:CheckIn:E] Running Loop=1
2018-05-24T12:44:52.988Z,1527165892.988 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 773.240820 min 
2018-05-24T12:44:52.988Z,1527165892.988 [Default:CheckIn:E] Stopped
2018-05-24T12:44:52.988Z,1527165892.988 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T12:44:52.988Z,1527165892.988 [Default:CheckIn] Stopped
2018-05-24T12:44:52.988Z,1527165892.988 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T12:44:52.988Z,1527165892.988 [Default:CheckIn](INFO): Running loop #76
2018-05-24T12:44:52.989Z,1527165892.989 [Default:CheckIn] Running Loop=76
2018-05-24T12:44:52.989Z,1527165892.989 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T12:44:52.989Z,1527165892.989 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T12:46:08.203Z,1527165968.203 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:46:08.203Z,1527165968.203 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T12:46:08.204Z,1527165968.204 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:46:08.217Z,1527165968.217 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:46:08.218Z,1527165968.218 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T12:46:08.218Z,1527165968.218 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:46:08.271Z,1527165968.271 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:46:08.271Z,1527165968.271 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:46:08.637Z,1527165968.637 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:46:08.637Z,1527165968.637 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T12:46:08.638Z,1527165968.638 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:46:08.638Z,1527165968.638 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T12:46:09.014Z,1527165969.014 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:46:09.015Z,1527165969.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:46:09.015Z,1527165969.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:46:09.015Z,1527165969.015 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:46:09.016Z,1527165969.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:46:09.016Z,1527165969.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:48:43.717Z,1527166123.717 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T12:49:09.303Z,1527166149.303 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:49:09.303Z,1527166149.303 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T12:49:09.303Z,1527166149.303 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:49:09.305Z,1527166149.305 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:49:09.305Z,1527166149.305 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T12:49:09.305Z,1527166149.305 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:49:09.337Z,1527166149.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:49:09.338Z,1527166149.338 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:49:09.715Z,1527166149.715 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:49:09.715Z,1527166149.715 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T12:49:09.716Z,1527166149.716 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:49:09.716Z,1527166149.716 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T12:49:10.104Z,1527166150.104 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:49:10.104Z,1527166150.104 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:49:10.105Z,1527166150.105 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:49:10.105Z,1527166150.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:49:10.106Z,1527166150.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:49:10.106Z,1527166150.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:49:53.306Z,1527166193.306 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T12:44:52.0Z
2018-05-24T12:49:53.306Z,1527166193.306 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T12:49:53.306Z,1527166193.306 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T12:49:57.778Z,1527166197.778 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0229.lzma
2018-05-24T12:49:58.578Z,1527166198.578 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0229.lzma.bak
2018-05-24T12:49:58.579Z,1527166198.579 [DataOverHttps](INFO): SBD MOMSN=8291784
2018-05-24T12:50:07.451Z,1527166207.451 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0230.lzma
2018-05-24T12:50:08.239Z,1527166208.239 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0230.lzma.bak
2018-05-24T12:50:08.239Z,1527166208.239 [DataOverHttps](INFO): SBD MOMSN=8291786
2018-05-24T12:50:09.146Z,1527166209.146 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T12:50:09.146Z,1527166209.146 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T12:50:09.146Z,1527166209.146 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T12:52:10.184Z,1527166330.184 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:52:10.184Z,1527166330.184 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T12:52:10.184Z,1527166330.184 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:52:10.186Z,1527166330.186 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:52:10.186Z,1527166330.186 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T12:52:10.186Z,1527166330.186 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:52:10.222Z,1527166330.222 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:52:10.223Z,1527166330.223 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:52:13.296Z,1527166333.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:52:13.296Z,1527166333.296 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T12:52:13.297Z,1527166333.297 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:52:13.297Z,1527166333.297 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T12:52:13.415Z,1527166333.415 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:52:13.416Z,1527166333.416 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:52:13.416Z,1527166333.416 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:52:13.417Z,1527166333.417 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:52:13.417Z,1527166333.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:52:13.417Z,1527166333.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:55:09.311Z,1527166509.311 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T12:55:09.312Z,1527166509.312 [Default:CheckIn:C.Wait] Stopped
2018-05-24T12:55:09.312Z,1527166509.312 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T12:55:09.312Z,1527166509.312 [Default:CheckIn:D] Running Loop=1
2018-05-24T12:55:09.713Z,1527166509.713 [Default:CheckIn:D] Stopped
2018-05-24T12:55:09.714Z,1527166509.714 [Default:CheckIn:E] Running Loop=1
2018-05-24T12:55:10.111Z,1527166510.111 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 783.526237 min 
2018-05-24T12:55:10.112Z,1527166510.112 [Default:CheckIn:E] Stopped
2018-05-24T12:55:10.112Z,1527166510.112 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T12:55:10.112Z,1527166510.112 [Default:CheckIn] Stopped
2018-05-24T12:55:10.112Z,1527166510.112 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T12:55:10.112Z,1527166510.112 [Default:CheckIn](INFO): Running loop #77
2018-05-24T12:55:10.112Z,1527166510.112 [Default:CheckIn] Running Loop=77
2018-05-24T12:55:10.112Z,1527166510.112 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T12:55:10.112Z,1527166510.112 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T12:55:14.414Z,1527166514.414 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:55:14.414Z,1527166514.414 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T12:55:14.414Z,1527166514.414 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:55:14.416Z,1527166514.416 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:55:14.416Z,1527166514.416 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T12:55:14.416Z,1527166514.416 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:55:14.428Z,1527166514.428 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:55:14.429Z,1527166514.429 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:55:14.578Z,1527166514.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:55:14.578Z,1527166514.578 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T12:55:14.579Z,1527166514.579 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:55:14.579Z,1527166514.579 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T12:55:14.880Z,1527166514.880 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:55:14.880Z,1527166514.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:55:14.880Z,1527166514.880 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:55:14.881Z,1527166514.881 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:55:14.881Z,1527166514.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:55:14.882Z,1527166514.882 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:58:15.538Z,1527166695.538 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:58:15.539Z,1527166695.539 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T12:58:15.539Z,1527166695.539 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T12:58:15.540Z,1527166695.540 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T12:58:15.540Z,1527166695.540 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T12:58:15.540Z,1527166695.540 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T12:58:15.568Z,1527166695.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T12:58:15.569Z,1527166695.569 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T12:58:15.707Z,1527166695.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T12:58:15.707Z,1527166695.707 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T12:58:15.708Z,1527166695.708 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T12:58:15.708Z,1527166695.708 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T12:58:16.032Z,1527166696.032 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T12:58:16.033Z,1527166696.033 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:58:16.033Z,1527166696.033 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:58:16.034Z,1527166696.034 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T12:58:16.034Z,1527166696.034 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T12:58:16.034Z,1527166696.034 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T12:58:44.054Z,1527166724.054 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T13:00:10.394Z,1527166810.394 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T12:55:10.1Z
2018-05-24T13:00:10.394Z,1527166810.394 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T13:00:10.394Z,1527166810.394 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T13:00:14.706Z,1527166814.706 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0232.lzma
2018-05-24T13:00:15.506Z,1527166815.506 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0232.lzma.bak
2018-05-24T13:00:15.507Z,1527166815.507 [DataOverHttps](INFO): SBD MOMSN=8291789
2018-05-24T13:00:24.398Z,1527166824.398 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0233.lzma
2018-05-24T13:00:25.198Z,1527166825.198 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0233.lzma.bak
2018-05-24T13:00:25.199Z,1527166825.199 [DataOverHttps](INFO): SBD MOMSN=8291791
2018-05-24T13:00:26.106Z,1527166826.106 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T13:00:26.106Z,1527166826.106 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T13:00:26.106Z,1527166826.106 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T13:01:16.154Z,1527166876.154 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:01:16.154Z,1527166876.154 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T13:01:16.154Z,1527166876.154 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:01:16.155Z,1527166876.155 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:01:16.156Z,1527166876.156 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T13:01:16.156Z,1527166876.156 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:01:16.168Z,1527166876.168 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:01:16.168Z,1527166876.168 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:01:16.568Z,1527166876.568 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:01:16.568Z,1527166876.568 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T13:01:16.568Z,1527166876.568 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:01:16.568Z,1527166876.568 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T13:01:16.963Z,1527166876.963 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:01:16.963Z,1527166876.963 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:01:16.964Z,1527166876.964 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:01:16.964Z,1527166876.964 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:01:16.964Z,1527166876.964 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:01:16.965Z,1527166876.965 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:04:17.275Z,1527167057.275 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:04:17.275Z,1527167057.275 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T13:04:17.275Z,1527167057.275 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:04:17.276Z,1527167057.276 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:04:17.276Z,1527167057.276 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T13:04:17.277Z,1527167057.277 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:04:17.289Z,1527167057.289 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:04:17.290Z,1527167057.290 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:04:17.690Z,1527167057.690 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:04:17.690Z,1527167057.690 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T13:04:17.691Z,1527167057.691 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:04:17.691Z,1527167057.691 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T13:04:18.073Z,1527167058.073 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:04:18.074Z,1527167058.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:04:18.074Z,1527167058.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:04:18.075Z,1527167058.075 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:04:18.075Z,1527167058.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:04:18.075Z,1527167058.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:05:26.474Z,1527167126.474 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T13:05:26.474Z,1527167126.474 [Default:CheckIn:C.Wait] Stopped
2018-05-24T13:05:26.474Z,1527167126.474 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T13:05:26.474Z,1527167126.474 [Default:CheckIn:D] Running Loop=1
2018-05-24T13:05:26.877Z,1527167126.877 [Default:CheckIn:D] Stopped
2018-05-24T13:05:26.878Z,1527167126.878 [Default:CheckIn:E] Running Loop=1
2018-05-24T13:05:27.274Z,1527167127.274 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 793.812305 min 
2018-05-24T13:05:27.274Z,1527167127.274 [Default:CheckIn:E] Stopped
2018-05-24T13:05:27.275Z,1527167127.275 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T13:05:27.275Z,1527167127.275 [Default:CheckIn] Stopped
2018-05-24T13:05:27.275Z,1527167127.275 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T13:05:27.275Z,1527167127.275 [Default:CheckIn](INFO): Running loop #78
2018-05-24T13:05:27.275Z,1527167127.275 [Default:CheckIn] Running Loop=78
2018-05-24T13:05:27.275Z,1527167127.275 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T13:05:27.275Z,1527167127.275 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T13:07:18.404Z,1527167238.404 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:07:18.404Z,1527167238.404 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T13:07:18.404Z,1527167238.404 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:07:18.406Z,1527167238.406 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:07:18.406Z,1527167238.406 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T13:07:18.406Z,1527167238.406 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:07:18.418Z,1527167238.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:07:18.419Z,1527167238.419 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:07:18.819Z,1527167238.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:07:18.819Z,1527167238.819 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T13:07:18.820Z,1527167238.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:07:18.820Z,1527167238.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T13:07:19.218Z,1527167239.218 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:07:19.219Z,1527167239.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:07:19.219Z,1527167239.219 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:07:19.220Z,1527167239.220 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:07:19.220Z,1527167239.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:07:19.220Z,1527167239.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:08:44.397Z,1527167324.397 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T13:10:19.540Z,1527167419.540 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:10:19.540Z,1527167419.540 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T13:10:19.540Z,1527167419.540 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:10:19.542Z,1527167419.542 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:10:19.542Z,1527167419.542 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T13:10:19.542Z,1527167419.542 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:10:19.554Z,1527167419.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:10:19.554Z,1527167419.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:10:19.959Z,1527167419.959 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:10:19.959Z,1527167419.959 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T13:10:19.960Z,1527167419.960 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:10:19.960Z,1527167419.960 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T13:10:20.350Z,1527167420.350 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:10:20.351Z,1527167420.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:10:20.351Z,1527167420.351 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:10:20.352Z,1527167420.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:10:20.352Z,1527167420.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:10:20.352Z,1527167420.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:10:27.542Z,1527167427.542 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T13:05:27.3Z
2018-05-24T13:10:27.542Z,1527167427.542 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T13:10:27.542Z,1527167427.542 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T13:10:32.011Z,1527167432.011 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0235.lzma
2018-05-24T13:10:32.778Z,1527167432.778 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0235.lzma.bak
2018-05-24T13:10:32.778Z,1527167432.778 [DataOverHttps](INFO): SBD MOMSN=8291794
2018-05-24T13:10:41.664Z,1527167441.664 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0236.lzma
2018-05-24T13:10:42.434Z,1527167442.434 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0236.lzma.bak
2018-05-24T13:10:42.435Z,1527167442.435 [DataOverHttps](INFO): SBD MOMSN=8291796
2018-05-24T13:10:43.360Z,1527167443.360 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T13:10:43.360Z,1527167443.360 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T13:10:43.360Z,1527167443.360 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T13:13:20.552Z,1527167600.552 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:13:20.552Z,1527167600.552 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T13:13:20.552Z,1527167600.552 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:13:20.554Z,1527167600.554 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:13:20.554Z,1527167600.554 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T13:13:20.554Z,1527167600.554 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:13:20.573Z,1527167600.573 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:13:20.574Z,1527167600.574 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:13:20.985Z,1527167600.985 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:13:20.985Z,1527167600.985 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T13:13:20.986Z,1527167600.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:13:20.986Z,1527167600.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T13:13:21.363Z,1527167601.363 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:13:21.363Z,1527167601.363 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:13:21.364Z,1527167601.364 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:13:21.364Z,1527167601.364 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:13:21.364Z,1527167601.364 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:13:21.365Z,1527167601.365 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:15:43.749Z,1527167743.749 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T13:15:43.750Z,1527167743.750 [Default:CheckIn:C.Wait] Stopped
2018-05-24T13:15:43.750Z,1527167743.750 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T13:15:43.750Z,1527167743.750 [Default:CheckIn:D] Running Loop=1
2018-05-24T13:15:44.151Z,1527167744.151 [Default:CheckIn:D] Stopped
2018-05-24T13:15:44.151Z,1527167744.151 [Default:CheckIn:E] Running Loop=1
2018-05-24T13:15:44.552Z,1527167744.552 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 804.100195 min 
2018-05-24T13:15:44.552Z,1527167744.552 [Default:CheckIn:E] Stopped
2018-05-24T13:15:44.552Z,1527167744.552 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T13:15:44.552Z,1527167744.552 [Default:CheckIn] Stopped
2018-05-24T13:15:44.552Z,1527167744.552 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T13:15:44.552Z,1527167744.552 [Default:CheckIn](INFO): Running loop #79
2018-05-24T13:15:44.552Z,1527167744.552 [Default:CheckIn] Running Loop=79
2018-05-24T13:15:44.553Z,1527167744.553 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T13:15:44.553Z,1527167744.553 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T13:16:21.710Z,1527167781.710 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:16:21.710Z,1527167781.710 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T13:16:21.710Z,1527167781.710 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:16:21.712Z,1527167781.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:16:21.712Z,1527167781.712 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T13:16:21.712Z,1527167781.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:16:21.732Z,1527167781.732 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:16:21.737Z,1527167781.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:16:22.146Z,1527167782.146 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:16:22.147Z,1527167782.147 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T13:16:22.147Z,1527167782.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:16:22.147Z,1527167782.147 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T13:16:22.519Z,1527167782.519 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:16:22.520Z,1527167782.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:16:22.520Z,1527167782.520 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:16:22.520Z,1527167782.520 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:16:22.521Z,1527167782.521 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:16:22.521Z,1527167782.521 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:18:44.499Z,1527167924.499 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T13:19:22.872Z,1527167962.872 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:19:22.872Z,1527167962.872 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T13:19:22.872Z,1527167962.872 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:19:22.874Z,1527167962.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:19:22.874Z,1527167962.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T13:19:22.874Z,1527167962.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:19:22.913Z,1527167962.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:19:22.913Z,1527167962.913 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:19:23.283Z,1527167963.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:19:23.283Z,1527167963.283 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T13:19:23.284Z,1527167963.284 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:19:23.284Z,1527167963.284 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T13:19:23.668Z,1527167963.668 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:19:23.668Z,1527167963.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:19:23.668Z,1527167963.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:19:23.669Z,1527167963.669 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:19:23.669Z,1527167963.669 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:19:23.670Z,1527167963.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:20:44.837Z,1527168044.837 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T13:15:44.6Z
2018-05-24T13:20:44.837Z,1527168044.837 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T13:20:44.837Z,1527168044.837 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T13:20:49.161Z,1527168049.161 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0238.lzma
2018-05-24T13:20:49.962Z,1527168049.962 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0238.lzma.bak
2018-05-24T13:20:49.963Z,1527168049.963 [DataOverHttps](INFO): SBD MOMSN=8291799
2018-05-24T13:20:58.479Z,1527168058.479 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0239.lzma
2018-05-24T13:20:59.243Z,1527168059.243 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0239.lzma.bak
2018-05-24T13:20:59.243Z,1527168059.243 [DataOverHttps](INFO): SBD MOMSN=8291801
2018-05-24T13:21:00.129Z,1527168060.129 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T13:21:00.129Z,1527168060.129 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T13:21:00.130Z,1527168060.130 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T13:22:23.768Z,1527168143.768 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:22:23.768Z,1527168143.768 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T13:22:23.768Z,1527168143.768 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:22:23.770Z,1527168143.770 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:22:23.770Z,1527168143.770 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T13:22:23.770Z,1527168143.770 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:22:23.791Z,1527168143.791 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:22:23.791Z,1527168143.791 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:22:23.791Z,1527168143.791 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:22:23.792Z,1527168143.792 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:26:00.550Z,1527168360.550 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T13:26:00.550Z,1527168360.550 [Default:CheckIn:C.Wait] Stopped
2018-05-24T13:26:00.550Z,1527168360.550 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T13:26:00.550Z,1527168360.550 [Default:CheckIn:D] Running Loop=1
2018-05-24T13:26:00.957Z,1527168360.957 [Default:CheckIn:D] Stopped
2018-05-24T13:26:00.958Z,1527168360.958 [Default:CheckIn:E] Running Loop=1
2018-05-24T13:26:01.339Z,1527168361.339 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 814.380339 min 
2018-05-24T13:26:01.339Z,1527168361.339 [Default:CheckIn:E] Stopped
2018-05-24T13:26:01.339Z,1527168361.339 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T13:26:01.339Z,1527168361.339 [Default:CheckIn] Stopped
2018-05-24T13:26:01.339Z,1527168361.339 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T13:26:01.340Z,1527168361.340 [Default:CheckIn](INFO): Running loop #80
2018-05-24T13:26:01.340Z,1527168361.340 [Default:CheckIn] Running Loop=80
2018-05-24T13:26:01.340Z,1527168361.340 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T13:26:01.340Z,1527168361.340 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T13:28:44.606Z,1527168524.606 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T13:31:01.724Z,1527168661.724 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T13:26:01.3Z
2018-05-24T13:31:01.724Z,1527168661.724 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T13:31:01.724Z,1527168661.724 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T13:31:06.039Z,1527168666.039 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0241.lzma
2018-05-24T13:31:06.839Z,1527168666.839 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0241.lzma.bak
2018-05-24T13:31:06.839Z,1527168666.839 [DataOverHttps](INFO): SBD MOMSN=8291804
2018-05-24T13:31:15.739Z,1527168675.739 [DataOverHttps](INFO): Sending 182 bytes from file Logs/20180523T234807/Express0242.lzma
2018-05-24T13:31:16.506Z,1527168676.506 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0242.lzma.bak
2018-05-24T13:31:16.507Z,1527168676.507 [DataOverHttps](INFO): SBD MOMSN=8291806
2018-05-24T13:31:17.401Z,1527168677.401 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T13:31:17.402Z,1527168677.402 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T13:31:17.402Z,1527168677.402 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T13:36:17.836Z,1527168977.836 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T13:36:17.837Z,1527168977.837 [Default:CheckIn:C.Wait] Stopped
2018-05-24T13:36:17.837Z,1527168977.837 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T13:36:17.837Z,1527168977.837 [Default:CheckIn:D] Running Loop=1
2018-05-24T13:36:18.238Z,1527168978.238 [Default:CheckIn:D] Stopped
2018-05-24T13:36:18.238Z,1527168978.238 [Default:CheckIn:E] Running Loop=1
2018-05-24T13:36:18.637Z,1527168978.637 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 824.668359 min 
2018-05-24T13:36:18.637Z,1527168978.637 [Default:CheckIn:E] Stopped
2018-05-24T13:36:18.637Z,1527168978.637 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T13:36:18.637Z,1527168978.637 [Default:CheckIn] Stopped
2018-05-24T13:36:18.637Z,1527168978.637 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T13:36:18.638Z,1527168978.638 [Default:CheckIn](INFO): Running loop #81
2018-05-24T13:36:18.638Z,1527168978.638 [Default:CheckIn] Running Loop=81
2018-05-24T13:36:18.638Z,1527168978.638 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T13:36:18.638Z,1527168978.638 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T13:37:23.792Z,1527169043.792 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:37:23.792Z,1527169043.792 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T13:37:23.793Z,1527169043.793 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:37:23.793Z,1527169043.793 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T13:37:24.190Z,1527169044.190 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:37:24.190Z,1527169044.190 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:37:24.190Z,1527169044.190 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:37:24.191Z,1527169044.191 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:37:24.191Z,1527169044.191 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:37:24.191Z,1527169044.191 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:38:44.970Z,1527169124.970 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T13:40:24.529Z,1527169224.529 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:40:24.529Z,1527169224.529 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T13:40:24.529Z,1527169224.529 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:40:24.531Z,1527169224.531 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:40:24.531Z,1527169224.531 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T13:40:24.531Z,1527169224.531 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:40:24.542Z,1527169224.542 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:40:24.542Z,1527169224.542 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:40:24.954Z,1527169224.954 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:40:24.954Z,1527169224.954 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T13:40:24.954Z,1527169224.954 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:40:24.954Z,1527169224.954 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T13:40:25.336Z,1527169225.336 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:40:25.337Z,1527169225.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:40:25.337Z,1527169225.337 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:40:25.337Z,1527169225.337 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:40:25.338Z,1527169225.338 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:40:25.338Z,1527169225.338 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:41:18.932Z,1527169278.932 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T13:36:18.6Z
2018-05-24T13:41:18.932Z,1527169278.932 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T13:41:18.932Z,1527169278.932 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T13:41:23.335Z,1527169283.335 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0244.lzma
2018-05-24T13:41:24.110Z,1527169284.110 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0244.lzma.bak
2018-05-24T13:41:24.111Z,1527169284.111 [DataOverHttps](INFO): SBD MOMSN=8291811
2018-05-24T13:41:33.008Z,1527169293.008 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0245.lzma
2018-05-24T13:41:33.783Z,1527169293.783 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0245.lzma.bak
2018-05-24T13:41:33.783Z,1527169293.783 [DataOverHttps](INFO): SBD MOMSN=8291813
2018-05-24T13:41:34.687Z,1527169294.687 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T13:41:34.688Z,1527169294.688 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T13:41:34.688Z,1527169294.688 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T13:43:25.516Z,1527169405.516 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:43:25.516Z,1527169405.516 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T13:43:25.516Z,1527169405.516 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:43:25.518Z,1527169405.518 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:43:25.518Z,1527169405.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T13:43:25.518Z,1527169405.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:43:25.547Z,1527169405.547 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:43:25.547Z,1527169405.547 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:43:25.928Z,1527169405.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:43:25.928Z,1527169405.928 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T13:43:25.953Z,1527169405.953 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:43:25.953Z,1527169405.953 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T13:43:26.306Z,1527169406.306 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:43:26.306Z,1527169406.306 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:43:26.307Z,1527169406.307 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:43:26.307Z,1527169406.307 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:43:26.307Z,1527169406.307 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:43:26.308Z,1527169406.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:46:26.628Z,1527169586.628 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:46:26.628Z,1527169586.628 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T13:46:26.628Z,1527169586.628 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:46:26.630Z,1527169586.630 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:46:26.630Z,1527169586.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T13:46:26.630Z,1527169586.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:46:26.641Z,1527169586.641 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:46:26.642Z,1527169586.642 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:46:27.038Z,1527169587.038 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:46:27.038Z,1527169587.038 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T13:46:27.038Z,1527169587.038 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:46:27.038Z,1527169587.038 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T13:46:27.431Z,1527169587.431 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:46:27.432Z,1527169587.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:46:27.432Z,1527169587.432 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:46:27.432Z,1527169587.432 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:46:27.433Z,1527169587.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:46:27.433Z,1527169587.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:46:35.034Z,1527169595.034 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T13:46:35.034Z,1527169595.034 [Default:CheckIn:C.Wait] Stopped
2018-05-24T13:46:35.034Z,1527169595.034 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T13:46:35.034Z,1527169595.034 [Default:CheckIn:D] Running Loop=1
2018-05-24T13:46:35.441Z,1527169595.441 [Default:CheckIn:D] Stopped
2018-05-24T13:46:35.441Z,1527169595.441 [Default:CheckIn:E] Running Loop=1
2018-05-24T13:46:35.829Z,1527169595.829 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 834.955078 min 
2018-05-24T13:46:35.829Z,1527169595.829 [Default:CheckIn:E] Stopped
2018-05-24T13:46:35.830Z,1527169595.830 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T13:46:35.830Z,1527169595.830 [Default:CheckIn] Stopped
2018-05-24T13:46:35.830Z,1527169595.830 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T13:46:35.830Z,1527169595.830 [Default:CheckIn](INFO): Running loop #82
2018-05-24T13:46:35.830Z,1527169595.830 [Default:CheckIn] Running Loop=82
2018-05-24T13:46:35.830Z,1527169595.830 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T13:46:35.830Z,1527169595.830 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T13:48:45.352Z,1527169725.352 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T13:49:27.729Z,1527169767.729 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:49:27.729Z,1527169767.729 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T13:49:27.729Z,1527169767.729 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:49:27.731Z,1527169767.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:49:27.731Z,1527169767.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T13:49:27.731Z,1527169767.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:49:27.779Z,1527169767.779 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:49:27.779Z,1527169767.779 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:49:28.138Z,1527169768.138 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:49:28.138Z,1527169768.138 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T13:49:28.139Z,1527169768.139 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:49:28.139Z,1527169768.139 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T13:49:28.535Z,1527169768.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:49:28.536Z,1527169768.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:49:28.536Z,1527169768.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:49:28.536Z,1527169768.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:49:28.537Z,1527169768.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:49:28.537Z,1527169768.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:51:36.086Z,1527169896.086 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T13:46:35.8Z
2018-05-24T13:51:36.086Z,1527169896.086 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T13:51:36.086Z,1527169896.086 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T13:51:40.403Z,1527169900.403 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0247.lzma
2018-05-24T13:51:41.202Z,1527169901.202 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0247.lzma.bak
2018-05-24T13:51:41.203Z,1527169901.203 [DataOverHttps](INFO): SBD MOMSN=8291816
2018-05-24T13:51:50.115Z,1527169910.115 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0248.lzma
2018-05-24T13:51:50.914Z,1527169910.914 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0248.lzma.bak
2018-05-24T13:51:50.915Z,1527169910.915 [DataOverHttps](INFO): SBD MOMSN=8291818
2018-05-24T13:51:51.809Z,1527169911.809 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T13:51:51.809Z,1527169911.809 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T13:51:51.809Z,1527169911.809 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T13:52:28.667Z,1527169948.667 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:52:28.667Z,1527169948.667 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T13:52:28.667Z,1527169948.667 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:52:28.669Z,1527169948.669 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:52:28.670Z,1527169948.670 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T13:52:28.670Z,1527169948.670 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:52:28.700Z,1527169948.700 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:52:28.700Z,1527169948.700 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:52:29.080Z,1527169949.080 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:52:29.080Z,1527169949.080 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T13:52:29.081Z,1527169949.081 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:52:29.081Z,1527169949.081 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T13:52:29.465Z,1527169949.465 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:52:29.466Z,1527169949.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:52:29.466Z,1527169949.466 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:52:29.466Z,1527169949.466 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:52:29.467Z,1527169949.467 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:52:29.467Z,1527169949.467 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:55:29.798Z,1527170129.798 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:55:29.799Z,1527170129.799 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T13:55:29.799Z,1527170129.799 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:55:29.800Z,1527170129.800 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:55:29.800Z,1527170129.800 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T13:55:29.800Z,1527170129.800 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:55:29.812Z,1527170129.812 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:55:29.829Z,1527170129.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:55:30.216Z,1527170130.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:55:30.216Z,1527170130.216 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T13:55:30.216Z,1527170130.216 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:55:30.237Z,1527170130.237 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T13:55:30.607Z,1527170130.607 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:55:30.607Z,1527170130.607 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:55:30.608Z,1527170130.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:55:30.608Z,1527170130.608 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:55:30.608Z,1527170130.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:55:30.609Z,1527170130.609 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:56:52.167Z,1527170212.167 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T13:56:52.167Z,1527170212.167 [Default:CheckIn:C.Wait] Stopped
2018-05-24T13:56:52.167Z,1527170212.167 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T13:56:52.167Z,1527170212.167 [Default:CheckIn:D] Running Loop=1
2018-05-24T13:56:52.569Z,1527170212.569 [Default:CheckIn:D] Stopped
2018-05-24T13:56:52.569Z,1527170212.569 [Default:CheckIn:E] Running Loop=1
2018-05-24T13:56:52.968Z,1527170212.968 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 845.240495 min 
2018-05-24T13:56:52.968Z,1527170212.968 [Default:CheckIn:E] Stopped
2018-05-24T13:56:52.969Z,1527170212.969 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T13:56:52.969Z,1527170212.969 [Default:CheckIn] Stopped
2018-05-24T13:56:52.969Z,1527170212.969 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T13:56:52.969Z,1527170212.969 [Default:CheckIn](INFO): Running loop #83
2018-05-24T13:56:52.969Z,1527170212.969 [Default:CheckIn] Running Loop=83
2018-05-24T13:56:52.970Z,1527170212.970 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T13:56:52.970Z,1527170212.970 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T13:58:30.628Z,1527170310.628 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:58:30.628Z,1527170310.628 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T13:58:30.628Z,1527170310.628 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T13:58:30.630Z,1527170310.630 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T13:58:30.630Z,1527170310.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T13:58:30.630Z,1527170310.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T13:58:30.642Z,1527170310.642 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T13:58:30.643Z,1527170310.643 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T13:58:31.037Z,1527170311.037 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T13:58:31.037Z,1527170311.037 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T13:58:31.038Z,1527170311.038 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T13:58:31.038Z,1527170311.038 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T13:58:31.427Z,1527170311.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T13:58:31.427Z,1527170311.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:58:31.428Z,1527170311.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:58:31.428Z,1527170311.428 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T13:58:31.429Z,1527170311.429 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T13:58:31.429Z,1527170311.429 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T13:58:45.431Z,1527170325.431 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T14:01:31.817Z,1527170491.817 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:01:31.817Z,1527170491.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T14:01:31.817Z,1527170491.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:01:31.821Z,1527170491.821 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:01:31.821Z,1527170491.821 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T14:01:31.821Z,1527170491.821 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:01:31.901Z,1527170491.901 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:01:31.901Z,1527170491.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:01:32.190Z,1527170492.190 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:01:32.190Z,1527170492.190 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T14:01:32.191Z,1527170492.191 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:01:32.191Z,1527170492.191 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T14:01:32.586Z,1527170492.586 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:01:32.586Z,1527170492.586 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:01:32.587Z,1527170492.587 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:01:32.587Z,1527170492.587 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:01:32.587Z,1527170492.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:01:32.588Z,1527170492.588 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:01:52.982Z,1527170512.982 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T13:56:52.0Z
2018-05-24T14:01:52.982Z,1527170512.982 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T14:01:52.982Z,1527170512.982 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T14:01:57.381Z,1527170517.381 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0250.lzma
2018-05-24T14:01:58.153Z,1527170518.153 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0250.lzma.bak
2018-05-24T14:01:58.153Z,1527170518.153 [DataOverHttps](INFO): SBD MOMSN=8291821
2018-05-24T14:02:07.041Z,1527170527.041 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0251.lzma
2018-05-24T14:02:07.811Z,1527170527.811 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0251.lzma.bak
2018-05-24T14:02:07.811Z,1527170527.811 [DataOverHttps](INFO): SBD MOMSN=8291823
2018-05-24T14:02:08.706Z,1527170528.706 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T14:02:08.706Z,1527170528.706 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T14:02:08.706Z,1527170528.706 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T14:04:32.721Z,1527170672.721 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:04:32.721Z,1527170672.721 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T14:04:32.722Z,1527170672.722 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:04:32.723Z,1527170672.723 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:04:32.723Z,1527170672.723 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T14:04:32.723Z,1527170672.723 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:04:32.758Z,1527170672.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:04:32.758Z,1527170672.758 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:04:33.129Z,1527170673.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:04:33.129Z,1527170673.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T14:04:33.130Z,1527170673.130 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:04:33.130Z,1527170673.130 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T14:04:33.527Z,1527170673.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:04:33.528Z,1527170673.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:04:33.528Z,1527170673.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:04:33.528Z,1527170673.528 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:04:33.529Z,1527170673.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:04:33.529Z,1527170673.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:07:08.891Z,1527170828.891 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T14:07:08.892Z,1527170828.892 [Default:CheckIn:C.Wait] Stopped
2018-05-24T14:07:08.892Z,1527170828.892 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T14:07:08.892Z,1527170828.892 [Default:CheckIn:D] Running Loop=1
2018-05-24T14:07:09.297Z,1527170829.297 [Default:CheckIn:D] Stopped
2018-05-24T14:07:09.297Z,1527170829.297 [Default:CheckIn:E] Running Loop=1
2018-05-24T14:07:09.694Z,1527170829.694 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 855.519336 min 
2018-05-24T14:07:09.694Z,1527170829.694 [Default:CheckIn:E] Stopped
2018-05-24T14:07:09.694Z,1527170829.694 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T14:07:09.694Z,1527170829.694 [Default:CheckIn] Stopped
2018-05-24T14:07:09.694Z,1527170829.694 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T14:07:09.695Z,1527170829.695 [Default:CheckIn](INFO): Running loop #84
2018-05-24T14:07:09.695Z,1527170829.695 [Default:CheckIn] Running Loop=84
2018-05-24T14:07:09.695Z,1527170829.695 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T14:07:09.695Z,1527170829.695 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T14:07:33.693Z,1527170853.693 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:07:33.693Z,1527170853.693 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T14:07:33.693Z,1527170853.693 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:07:33.695Z,1527170853.695 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:07:33.695Z,1527170853.695 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T14:07:33.695Z,1527170853.695 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:07:33.707Z,1527170853.707 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:07:33.707Z,1527170853.707 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:07:34.103Z,1527170854.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:07:34.103Z,1527170854.103 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T14:07:34.103Z,1527170854.103 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:07:34.104Z,1527170854.104 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T14:07:34.499Z,1527170854.499 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:07:34.499Z,1527170854.499 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:07:34.500Z,1527170854.500 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:07:34.500Z,1527170854.500 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:07:34.500Z,1527170854.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:07:34.501Z,1527170854.501 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:08:45.679Z,1527170925.679 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T14:10:34.846Z,1527171034.846 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:10:34.846Z,1527171034.846 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T14:10:34.846Z,1527171034.846 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:10:34.848Z,1527171034.848 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:10:34.848Z,1527171034.848 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T14:10:34.848Z,1527171034.848 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:10:34.891Z,1527171034.891 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:10:34.891Z,1527171034.891 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:10:35.279Z,1527171035.279 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:10:35.279Z,1527171035.279 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T14:10:35.279Z,1527171035.279 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:10:35.279Z,1527171035.279 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T14:10:35.644Z,1527171035.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:10:35.645Z,1527171035.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:10:35.645Z,1527171035.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:10:35.646Z,1527171035.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:10:35.646Z,1527171035.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:10:35.646Z,1527171035.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:12:10.030Z,1527171130.030 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T14:07:09.7Z
2018-05-24T14:12:10.030Z,1527171130.030 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T14:12:10.030Z,1527171130.030 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T14:12:14.393Z,1527171134.393 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0253.lzma
2018-05-24T14:12:15.163Z,1527171135.163 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0253.lzma.bak
2018-05-24T14:12:15.163Z,1527171135.163 [DataOverHttps](INFO): SBD MOMSN=8291826
2018-05-24T14:12:24.412Z,1527171144.412 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0254.lzma
2018-05-24T14:12:25.182Z,1527171145.182 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0254.lzma.bak
2018-05-24T14:12:25.183Z,1527171145.183 [DataOverHttps](INFO): SBD MOMSN=8291828
2018-05-24T14:12:26.083Z,1527171146.083 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T14:12:26.083Z,1527171146.083 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T14:12:26.083Z,1527171146.083 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T14:13:35.703Z,1527171215.703 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:13:35.703Z,1527171215.703 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T14:13:35.703Z,1527171215.703 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:13:35.705Z,1527171215.705 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:13:35.705Z,1527171215.705 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T14:13:35.705Z,1527171215.705 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:13:35.745Z,1527171215.745 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:13:35.746Z,1527171215.746 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:13:36.116Z,1527171216.116 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:13:36.116Z,1527171216.116 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T14:13:36.116Z,1527171216.116 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:13:36.116Z,1527171216.116 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T14:13:36.506Z,1527171216.506 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:13:36.507Z,1527171216.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:13:36.507Z,1527171216.507 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:13:36.508Z,1527171216.508 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:13:36.508Z,1527171216.508 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:13:36.508Z,1527171216.508 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:16:36.838Z,1527171396.838 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:16:36.838Z,1527171396.838 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T14:16:36.839Z,1527171396.839 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:16:36.840Z,1527171396.840 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:16:36.840Z,1527171396.840 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T14:16:36.840Z,1527171396.840 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:16:36.852Z,1527171396.852 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:16:36.853Z,1527171396.853 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:16:37.256Z,1527171397.256 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:16:37.256Z,1527171397.256 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T14:16:37.256Z,1527171397.256 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:16:37.256Z,1527171397.256 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T14:16:37.645Z,1527171397.645 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:16:37.645Z,1527171397.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:16:37.646Z,1527171397.646 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:16:37.646Z,1527171397.646 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:16:37.646Z,1527171397.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:16:37.647Z,1527171397.647 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:17:26.439Z,1527171446.439 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T14:17:26.439Z,1527171446.439 [Default:CheckIn:C.Wait] Stopped
2018-05-24T14:17:26.439Z,1527171446.439 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T14:17:26.439Z,1527171446.439 [Default:CheckIn:D] Running Loop=1
2018-05-24T14:17:26.850Z,1527171446.850 [Default:CheckIn:D] Stopped
2018-05-24T14:17:26.850Z,1527171446.850 [Default:CheckIn:E] Running Loop=1
2018-05-24T14:17:27.239Z,1527171447.239 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 865.811849 min 
2018-05-24T14:17:27.240Z,1527171447.240 [Default:CheckIn:E] Stopped
2018-05-24T14:17:27.240Z,1527171447.240 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T14:17:27.240Z,1527171447.240 [Default:CheckIn] Stopped
2018-05-24T14:17:27.240Z,1527171447.240 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T14:17:27.240Z,1527171447.240 [Default:CheckIn](INFO): Running loop #85
2018-05-24T14:17:27.240Z,1527171447.240 [Default:CheckIn] Running Loop=85
2018-05-24T14:17:27.240Z,1527171447.240 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T14:17:27.241Z,1527171447.241 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T14:18:46.046Z,1527171526.046 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T14:19:37.000Z,1527171578.000 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:19:37.000Z,1527171578.000 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T14:19:37.000Z,1527171578.000 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:19:38.001Z,1527171578.001 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:19:38.002Z,1527171578.002 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T14:19:38.002Z,1527171578.002 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:19:38.035Z,1527171578.035 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:19:38.035Z,1527171578.035 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:19:38.407Z,1527171578.407 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:19:38.408Z,1527171578.408 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T14:19:38.408Z,1527171578.408 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:19:38.408Z,1527171578.408 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T14:19:38.800Z,1527171578.800 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:19:38.800Z,1527171578.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:19:38.800Z,1527171578.800 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:19:38.801Z,1527171578.801 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:19:38.801Z,1527171578.801 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:19:38.802Z,1527171578.802 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:22:27.562Z,1527171747.562 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T14:17:27.2Z
2018-05-24T14:22:27.562Z,1527171747.562 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T14:22:27.562Z,1527171747.562 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T14:22:31.985Z,1527171751.985 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0256.lzma
2018-05-24T14:22:32.782Z,1527171752.782 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0256.lzma.bak
2018-05-24T14:22:32.783Z,1527171752.783 [DataOverHttps](INFO): SBD MOMSN=8291831
2018-05-24T14:22:41.627Z,1527171761.627 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:22:41.627Z,1527171761.627 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T14:22:41.627Z,1527171761.627 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:22:41.629Z,1527171761.629 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:22:41.629Z,1527171761.629 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T14:22:41.629Z,1527171761.629 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:22:41.642Z,1527171761.642 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:22:41.642Z,1527171761.642 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:22:41.651Z,1527171761.651 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0257.lzma
2018-05-24T14:22:41.787Z,1527171761.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:22:41.787Z,1527171761.787 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T14:22:41.787Z,1527171761.787 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:22:41.787Z,1527171761.787 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T14:22:42.097Z,1527171762.097 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:22:42.097Z,1527171762.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:22:42.098Z,1527171762.098 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:22:42.098Z,1527171762.098 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:22:42.098Z,1527171762.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:22:42.099Z,1527171762.099 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:22:42.450Z,1527171762.450 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0257.lzma.bak
2018-05-24T14:22:42.451Z,1527171762.451 [DataOverHttps](INFO): SBD MOMSN=8291833
2018-05-24T14:22:43.399Z,1527171763.399 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T14:22:43.399Z,1527171763.399 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T14:22:43.399Z,1527171763.399 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T14:25:42.205Z,1527171942.205 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:25:42.205Z,1527171942.205 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T14:25:42.205Z,1527171942.205 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:25:42.207Z,1527171942.207 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:25:42.207Z,1527171942.207 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T14:25:42.207Z,1527171942.207 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:25:42.218Z,1527171942.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:25:42.219Z,1527171942.219 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:25:42.616Z,1527171942.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:25:42.617Z,1527171942.617 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T14:25:42.617Z,1527171942.617 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:25:42.617Z,1527171942.617 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T14:25:43.015Z,1527171943.015 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:25:43.015Z,1527171943.015 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:25:43.016Z,1527171943.016 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:25:43.016Z,1527171943.016 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:25:43.016Z,1527171943.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:25:43.017Z,1527171943.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:27:43.757Z,1527172063.757 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T14:27:43.757Z,1527172063.757 [Default:CheckIn:C.Wait] Stopped
2018-05-24T14:27:43.758Z,1527172063.758 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T14:27:43.758Z,1527172063.758 [Default:CheckIn:D] Running Loop=1
2018-05-24T14:27:44.162Z,1527172064.162 [Default:CheckIn:D] Stopped
2018-05-24T14:27:44.162Z,1527172064.162 [Default:CheckIn:E] Running Loop=1
2018-05-24T14:27:44.552Z,1527172064.552 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 876.100391 min 
2018-05-24T14:27:44.552Z,1527172064.552 [Default:CheckIn:E] Stopped
2018-05-24T14:27:44.552Z,1527172064.552 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T14:27:44.552Z,1527172064.552 [Default:CheckIn] Stopped
2018-05-24T14:27:44.552Z,1527172064.552 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T14:27:44.553Z,1527172064.553 [Default:CheckIn](INFO): Running loop #86
2018-05-24T14:27:44.553Z,1527172064.553 [Default:CheckIn] Running Loop=86
2018-05-24T14:27:44.553Z,1527172064.553 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T14:27:44.553Z,1527172064.553 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T14:28:43.313Z,1527172123.313 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:28:43.313Z,1527172123.313 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T14:28:43.313Z,1527172123.313 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:28:43.315Z,1527172123.315 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:28:43.315Z,1527172123.315 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T14:28:43.315Z,1527172123.315 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:28:43.326Z,1527172123.326 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:28:43.326Z,1527172123.326 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:28:43.724Z,1527172123.724 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:28:43.724Z,1527172123.724 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T14:28:43.725Z,1527172123.725 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:28:43.725Z,1527172123.725 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T14:28:44.115Z,1527172124.115 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:28:44.115Z,1527172124.115 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:28:44.116Z,1527172124.116 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:28:44.116Z,1527172124.116 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:28:44.117Z,1527172124.117 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:28:44.117Z,1527172124.117 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:28:48.830Z,1527172128.830 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T14:31:44.452Z,1527172304.452 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:31:44.452Z,1527172304.452 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T14:31:44.452Z,1527172304.452 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:31:44.454Z,1527172304.454 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:31:44.454Z,1527172304.454 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T14:31:44.454Z,1527172304.454 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:31:44.502Z,1527172304.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:31:44.502Z,1527172304.502 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:31:44.859Z,1527172304.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:31:44.859Z,1527172304.859 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T14:31:44.860Z,1527172304.860 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:31:44.860Z,1527172304.860 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T14:31:45.255Z,1527172305.255 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:31:45.255Z,1527172305.255 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:31:45.256Z,1527172305.256 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:31:45.256Z,1527172305.256 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:31:45.256Z,1527172305.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:31:45.257Z,1527172305.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:32:44.822Z,1527172364.822 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T14:27:44.6Z
2018-05-24T14:32:44.822Z,1527172364.822 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T14:32:44.822Z,1527172364.822 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T14:32:49.192Z,1527172369.192 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0259.lzma
2018-05-24T14:32:49.955Z,1527172369.955 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0259.lzma.bak
2018-05-24T14:32:49.955Z,1527172369.955 [DataOverHttps](INFO): SBD MOMSN=8291836
2018-05-24T14:32:58.852Z,1527172378.852 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0260.lzma
2018-05-24T14:32:59.619Z,1527172379.619 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0260.lzma.bak
2018-05-24T14:32:59.619Z,1527172379.619 [DataOverHttps](INFO): SBD MOMSN=8291838
2018-05-24T14:33:00.516Z,1527172380.516 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T14:33:00.516Z,1527172380.516 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T14:33:00.516Z,1527172380.516 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T14:34:45.368Z,1527172485.368 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:34:45.368Z,1527172485.368 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T14:34:45.368Z,1527172485.368 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:34:45.370Z,1527172485.370 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:34:45.370Z,1527172485.370 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T14:34:45.370Z,1527172485.370 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:34:45.382Z,1527172485.382 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:34:45.382Z,1527172485.382 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:34:45.791Z,1527172485.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:34:45.791Z,1527172485.791 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T14:34:45.792Z,1527172485.792 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:34:45.792Z,1527172485.792 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T14:34:46.146Z,1527172486.146 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:34:46.147Z,1527172486.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:34:46.147Z,1527172486.147 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:34:46.148Z,1527172486.148 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:34:46.148Z,1527172486.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:34:46.148Z,1527172486.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:37:46.280Z,1527172666.280 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:37:46.281Z,1527172666.281 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T14:37:46.281Z,1527172666.281 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:37:46.282Z,1527172666.282 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:37:46.283Z,1527172666.283 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T14:37:46.283Z,1527172666.283 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:37:46.315Z,1527172666.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:37:46.315Z,1527172666.315 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:37:46.315Z,1527172666.315 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:37:46.316Z,1527172666.316 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:38:00.684Z,1527172680.684 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T14:38:00.684Z,1527172680.684 [Default:CheckIn:C.Wait] Stopped
2018-05-24T14:38:00.684Z,1527172680.684 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T14:38:00.684Z,1527172680.684 [Default:CheckIn:D] Running Loop=1
2018-05-24T14:38:01.074Z,1527172681.074 [Default:CheckIn:D] Stopped
2018-05-24T14:38:01.074Z,1527172681.074 [Default:CheckIn:E] Running Loop=1
2018-05-24T14:38:01.468Z,1527172681.468 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 886.382292 min 
2018-05-24T14:38:01.468Z,1527172681.468 [Default:CheckIn:E] Stopped
2018-05-24T14:38:01.468Z,1527172681.468 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T14:38:01.468Z,1527172681.468 [Default:CheckIn] Stopped
2018-05-24T14:38:01.468Z,1527172681.468 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T14:38:01.469Z,1527172681.469 [Default:CheckIn](INFO): Running loop #87
2018-05-24T14:38:01.469Z,1527172681.469 [Default:CheckIn] Running Loop=87
2018-05-24T14:38:01.469Z,1527172681.469 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T14:38:01.469Z,1527172681.469 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T14:38:49.162Z,1527172729.162 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T14:43:01.818Z,1527172981.818 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T14:38:01.5Z
2018-05-24T14:43:01.818Z,1527172981.818 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T14:43:01.819Z,1527172981.819 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T14:43:06.173Z,1527172986.173 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0262.lzma
2018-05-24T14:43:06.974Z,1527172986.974 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0262.lzma.bak
2018-05-24T14:43:06.975Z,1527172986.975 [DataOverHttps](INFO): SBD MOMSN=8291841
2018-05-24T14:43:15.840Z,1527172995.840 [DataOverHttps](INFO): Sending 179 bytes from file Logs/20180523T234807/Express0263.lzma
2018-05-24T14:43:16.619Z,1527172996.619 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0263.lzma.bak
2018-05-24T14:43:16.619Z,1527172996.619 [DataOverHttps](INFO): SBD MOMSN=8291843
2018-05-24T14:43:17.500Z,1527172997.500 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T14:43:17.500Z,1527172997.500 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T14:43:17.500Z,1527172997.500 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T14:48:17.828Z,1527173297.828 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T14:48:17.829Z,1527173297.829 [Default:CheckIn:C.Wait] Stopped
2018-05-24T14:48:17.829Z,1527173297.829 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T14:48:17.829Z,1527173297.829 [Default:CheckIn:D] Running Loop=1
2018-05-24T14:48:18.226Z,1527173298.226 [Default:CheckIn:D] Stopped
2018-05-24T14:48:18.226Z,1527173298.226 [Default:CheckIn:E] Running Loop=1
2018-05-24T14:48:18.632Z,1527173298.632 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 896.668164 min 
2018-05-24T14:48:18.633Z,1527173298.633 [Default:CheckIn:E] Stopped
2018-05-24T14:48:18.633Z,1527173298.633 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T14:48:18.633Z,1527173298.633 [Default:CheckIn] Stopped
2018-05-24T14:48:18.633Z,1527173298.633 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T14:48:18.633Z,1527173298.633 [Default:CheckIn](INFO): Running loop #88
2018-05-24T14:48:18.633Z,1527173298.633 [Default:CheckIn] Running Loop=88
2018-05-24T14:48:18.634Z,1527173298.634 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T14:48:18.634Z,1527173298.634 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T14:48:49.410Z,1527173329.410 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T14:52:46.517Z,1527173566.517 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:52:46.517Z,1527173566.517 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T14:52:46.518Z,1527173566.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:52:46.518Z,1527173566.518 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T14:52:46.894Z,1527173566.894 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:52:46.895Z,1527173566.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:52:46.895Z,1527173566.895 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:52:46.895Z,1527173566.895 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:52:46.896Z,1527173566.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:52:46.896Z,1527173566.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:53:18.902Z,1527173598.902 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T14:48:18.6Z
2018-05-24T14:53:18.902Z,1527173598.902 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T14:53:18.902Z,1527173598.902 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T14:53:23.216Z,1527173603.216 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0265.lzma
2018-05-24T14:53:24.019Z,1527173604.019 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0265.lzma.bak
2018-05-24T14:53:24.019Z,1527173604.019 [DataOverHttps](INFO): SBD MOMSN=8291848
2018-05-24T14:53:33.428Z,1527173613.428 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0266.lzma
2018-05-24T14:53:34.232Z,1527173614.232 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0266.lzma.bak
2018-05-24T14:53:34.232Z,1527173614.232 [DataOverHttps](INFO): SBD MOMSN=8291850
2018-05-24T14:53:35.204Z,1527173615.204 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T14:53:35.204Z,1527173615.204 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T14:53:35.204Z,1527173615.204 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T14:55:47.220Z,1527173747.220 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:55:47.220Z,1527173747.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T14:55:47.220Z,1527173747.220 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:55:47.222Z,1527173747.222 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:55:47.222Z,1527173747.222 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T14:55:47.222Z,1527173747.222 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:55:47.269Z,1527173747.269 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:55:47.269Z,1527173747.269 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:55:47.654Z,1527173747.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:55:47.654Z,1527173747.654 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T14:55:47.655Z,1527173747.655 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:55:47.655Z,1527173747.655 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T14:55:48.020Z,1527173748.020 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:55:48.020Z,1527173748.020 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:55:48.021Z,1527173748.021 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:55:48.021Z,1527173748.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:55:48.021Z,1527173748.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:55:48.022Z,1527173748.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:58:35.577Z,1527173915.577 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T14:58:35.578Z,1527173915.578 [Default:CheckIn:C.Wait] Stopped
2018-05-24T14:58:35.578Z,1527173915.578 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T14:58:35.578Z,1527173915.578 [Default:CheckIn:D] Running Loop=1
2018-05-24T14:58:36.013Z,1527173916.013 [Default:CheckIn:D] Stopped
2018-05-24T14:58:36.014Z,1527173916.014 [Default:CheckIn:E] Running Loop=1
2018-05-24T14:58:36.461Z,1527173916.461 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 906.964583 min 
2018-05-24T14:58:36.461Z,1527173916.461 [Default:CheckIn:E] Stopped
2018-05-24T14:58:36.462Z,1527173916.462 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T14:58:36.462Z,1527173916.462 [Default:CheckIn] Stopped
2018-05-24T14:58:36.462Z,1527173916.462 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T14:58:36.462Z,1527173916.462 [Default:CheckIn](INFO): Running loop #89
2018-05-24T14:58:36.462Z,1527173916.462 [Default:CheckIn] Running Loop=89
2018-05-24T14:58:36.462Z,1527173916.462 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T14:58:36.462Z,1527173916.462 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T14:58:48.350Z,1527173928.350 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:58:48.350Z,1527173928.350 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T14:58:48.350Z,1527173928.350 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T14:58:48.351Z,1527173928.351 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T14:58:48.352Z,1527173928.352 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T14:58:48.352Z,1527173928.352 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T14:58:48.383Z,1527173928.383 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T14:58:48.384Z,1527173928.384 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T14:58:48.753Z,1527173928.753 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T14:58:48.753Z,1527173928.753 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T14:58:48.753Z,1527173928.753 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T14:58:48.754Z,1527173928.754 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T14:58:49.149Z,1527173929.149 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T14:58:49.149Z,1527173929.149 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:58:49.149Z,1527173929.149 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:58:49.150Z,1527173929.150 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T14:58:49.150Z,1527173929.150 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T14:58:49.151Z,1527173929.151 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T14:58:49.547Z,1527173929.547 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T15:01:42.269Z,1527174102.269 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.409950 seconds old.
2018-05-24T15:01:42.270Z,1527174102.270 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.410413 seconds old.
2018-05-24T15:01:42.656Z,1527174102.656 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.796412 seconds old.
2018-05-24T15:01:42.661Z,1527174102.661 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.796838 seconds old.
2018-05-24T15:01:43.067Z,1527174103.067 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.207445 seconds old.
2018-05-24T15:01:43.068Z,1527174103.068 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.207858 seconds old.
2018-05-24T15:01:49.470Z,1527174109.470 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:01:49.470Z,1527174109.470 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-05-24T15:01:49.470Z,1527174109.470 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:01:49.472Z,1527174109.472 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:01:49.472Z,1527174109.472 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-24T15:01:49.472Z,1527174109.472 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:01:49.484Z,1527174109.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:01:49.484Z,1527174109.484 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:01:49.876Z,1527174109.876 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:01:49.876Z,1527174109.876 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-05-24T15:01:49.876Z,1527174109.876 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:01:49.876Z,1527174109.876 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-24T15:01:50.251Z,1527174110.251 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:01:50.251Z,1527174110.251 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:01:50.252Z,1527174110.252 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:01:50.252Z,1527174110.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:01:50.252Z,1527174110.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:01:50.253Z,1527174110.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:03:36.619Z,1527174216.619 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T14:58:36.5Z
2018-05-24T15:03:36.619Z,1527174216.619 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T15:03:36.619Z,1527174216.619 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T15:03:40.940Z,1527174220.940 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180523T234807/Courier0268.lzma
2018-05-24T15:03:41.739Z,1527174221.739 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0268.lzma.bak
2018-05-24T15:03:41.739Z,1527174221.739 [DataOverHttps](INFO): SBD MOMSN=8291853
2018-05-24T15:03:50.617Z,1527174230.617 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0269.lzma
2018-05-24T15:03:51.414Z,1527174231.414 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0269.lzma.bak
2018-05-24T15:03:51.415Z,1527174231.415 [DataOverHttps](INFO): SBD MOMSN=8291855
2018-05-24T15:03:52.595Z,1527174232.595 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T15:03:52.595Z,1527174232.595 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T15:03:52.595Z,1527174232.595 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T15:04:50.624Z,1527174290.624 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:04:50.624Z,1527174290.624 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-05-24T15:04:50.624Z,1527174290.624 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:04:50.626Z,1527174290.626 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:04:50.626Z,1527174290.626 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-24T15:04:50.626Z,1527174290.626 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:04:50.640Z,1527174290.640 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:04:50.641Z,1527174290.641 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:04:51.042Z,1527174291.042 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:04:51.042Z,1527174291.042 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-05-24T15:04:51.042Z,1527174291.042 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:04:51.042Z,1527174291.042 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-24T15:04:51.427Z,1527174291.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:04:51.427Z,1527174291.427 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:04:51.428Z,1527174291.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:04:51.428Z,1527174291.428 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:04:51.428Z,1527174291.428 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:04:51.429Z,1527174291.429 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:07:51.729Z,1527174471.729 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:07:51.730Z,1527174471.730 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-05-24T15:07:51.730Z,1527174471.730 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:07:51.731Z,1527174471.731 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:07:51.731Z,1527174471.731 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-24T15:07:51.731Z,1527174471.731 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:07:51.743Z,1527174471.743 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:07:51.743Z,1527174471.743 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:07:52.139Z,1527174472.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:07:52.139Z,1527174472.139 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-05-24T15:07:52.140Z,1527174472.140 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:07:52.140Z,1527174472.140 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-24T15:07:52.535Z,1527174472.535 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:07:52.535Z,1527174472.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:07:52.536Z,1527174472.536 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:07:52.536Z,1527174472.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:07:52.536Z,1527174472.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:07:52.537Z,1527174472.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:08:49.712Z,1527174529.712 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T15:08:52.908Z,1527174532.908 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T15:08:52.908Z,1527174532.908 [Default:CheckIn:C.Wait] Stopped
2018-05-24T15:08:52.908Z,1527174532.908 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T15:08:52.908Z,1527174532.908 [Default:CheckIn:D] Running Loop=1
2018-05-24T15:08:53.307Z,1527174533.307 [Default:CheckIn:D] Stopped
2018-05-24T15:08:53.307Z,1527174533.307 [Default:CheckIn:E] Running Loop=1
2018-05-24T15:08:53.703Z,1527174533.703 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 917.252799 min 
2018-05-24T15:08:53.704Z,1527174533.704 [Default:CheckIn:E] Stopped
2018-05-24T15:08:53.704Z,1527174533.704 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T15:08:53.704Z,1527174533.704 [Default:CheckIn] Stopped
2018-05-24T15:08:53.704Z,1527174533.704 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T15:08:53.704Z,1527174533.704 [Default:CheckIn](INFO): Running loop #90
2018-05-24T15:08:53.704Z,1527174533.704 [Default:CheckIn] Running Loop=90
2018-05-24T15:08:53.704Z,1527174533.704 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T15:08:53.705Z,1527174533.705 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T15:10:52.890Z,1527174652.890 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:10:52.890Z,1527174652.890 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-05-24T15:10:52.890Z,1527174652.890 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:10:52.892Z,1527174652.892 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:10:52.892Z,1527174652.892 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-24T15:10:52.892Z,1527174652.892 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:10:52.905Z,1527174652.905 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:10:52.905Z,1527174652.905 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:10:53.306Z,1527174653.306 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:10:53.306Z,1527174653.306 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-05-24T15:10:53.307Z,1527174653.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:10:53.307Z,1527174653.307 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-24T15:10:53.690Z,1527174653.690 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:10:53.690Z,1527174653.690 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:10:53.691Z,1527174653.691 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:10:53.691Z,1527174653.691 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:10:53.691Z,1527174653.691 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:10:53.692Z,1527174653.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:13:54.042Z,1527174834.042 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:13:54.042Z,1527174834.042 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-05-24T15:13:54.042Z,1527174834.042 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:13:54.044Z,1527174834.044 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:13:54.044Z,1527174834.044 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-24T15:13:54.044Z,1527174834.044 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:13:54.046Z,1527174834.046 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T15:08:53.7Z
2018-05-24T15:13:54.047Z,1527174834.047 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T15:13:54.047Z,1527174834.047 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T15:13:54.073Z,1527174834.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:13:54.073Z,1527174834.073 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:13:54.453Z,1527174834.453 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:13:54.453Z,1527174834.453 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-05-24T15:13:54.453Z,1527174834.453 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:13:54.453Z,1527174834.453 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-24T15:13:55.066Z,1527174835.066 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:13:55.066Z,1527174835.066 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:13:55.067Z,1527174835.067 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:13:55.067Z,1527174835.067 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:13:55.068Z,1527174835.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:13:55.068Z,1527174835.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:13:58.498Z,1527174838.498 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0271.lzma
2018-05-24T15:13:59.283Z,1527174839.283 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0271.lzma.bak
2018-05-24T15:13:59.283Z,1527174839.283 [DataOverHttps](INFO): SBD MOMSN=8291858
2018-05-24T15:14:08.448Z,1527174848.448 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0272.lzma
2018-05-24T15:14:09.247Z,1527174849.247 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0272.lzma.bak
2018-05-24T15:14:09.247Z,1527174849.247 [DataOverHttps](INFO): SBD MOMSN=8291860
2018-05-24T15:14:10.139Z,1527174850.139 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T15:14:10.139Z,1527174850.139 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T15:14:10.139Z,1527174850.139 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T15:16:55.107Z,1527175015.107 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:16:55.107Z,1527175015.107 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-05-24T15:16:55.107Z,1527175015.107 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:16:55.110Z,1527175015.110 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:16:55.110Z,1527175015.110 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-24T15:16:55.110Z,1527175015.110 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:16:55.122Z,1527175015.122 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:16:55.122Z,1527175015.122 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:16:55.526Z,1527175015.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:16:55.526Z,1527175015.526 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-05-24T15:16:55.526Z,1527175015.526 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:16:55.526Z,1527175015.526 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-24T15:16:55.918Z,1527175015.918 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:16:55.919Z,1527175015.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:16:55.919Z,1527175015.919 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:16:55.920Z,1527175015.920 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:16:55.920Z,1527175015.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:16:55.920Z,1527175015.920 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:18:49.860Z,1527175129.860 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T15:19:10.641Z,1527175150.641 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T15:19:10.641Z,1527175150.641 [Default:CheckIn:C.Wait] Stopped
2018-05-24T15:19:10.642Z,1527175150.642 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T15:19:10.642Z,1527175150.642 [Default:CheckIn:D] Running Loop=1
2018-05-24T15:19:11.068Z,1527175151.068 [Default:CheckIn:D] Stopped
2018-05-24T15:19:11.068Z,1527175151.068 [Default:CheckIn:E] Running Loop=1
2018-05-24T15:19:11.443Z,1527175151.443 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 927.548828 min 
2018-05-24T15:19:11.443Z,1527175151.443 [Default:CheckIn:E] Stopped
2018-05-24T15:19:11.444Z,1527175151.444 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T15:19:11.444Z,1527175151.444 [Default:CheckIn] Stopped
2018-05-24T15:19:11.444Z,1527175151.444 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T15:19:11.444Z,1527175151.444 [Default:CheckIn](INFO): Running loop #91
2018-05-24T15:19:11.444Z,1527175151.444 [Default:CheckIn] Running Loop=91
2018-05-24T15:19:11.444Z,1527175151.444 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T15:19:11.444Z,1527175151.444 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T15:19:56.216Z,1527175196.216 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:19:56.216Z,1527175196.216 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-05-24T15:19:56.216Z,1527175196.216 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:19:56.218Z,1527175196.218 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:19:56.218Z,1527175196.218 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-24T15:19:56.218Z,1527175196.218 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:19:56.250Z,1527175196.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:19:56.250Z,1527175196.250 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:19:56.643Z,1527175196.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:19:56.643Z,1527175196.643 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-05-24T15:19:56.643Z,1527175196.643 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:19:56.644Z,1527175196.644 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-24T15:19:57.017Z,1527175197.017 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:19:57.018Z,1527175197.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:19:57.018Z,1527175197.018 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:19:57.018Z,1527175197.018 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:19:57.019Z,1527175197.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:19:57.019Z,1527175197.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:22:57.333Z,1527175377.333 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:22:57.333Z,1527175377.333 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-05-24T15:22:57.334Z,1527175377.334 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:22:57.335Z,1527175377.335 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:22:57.335Z,1527175377.335 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-24T15:22:57.335Z,1527175377.335 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:22:57.348Z,1527175377.348 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:22:57.348Z,1527175377.348 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:22:57.750Z,1527175377.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:22:57.750Z,1527175377.750 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-05-24T15:22:57.750Z,1527175377.750 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:22:57.750Z,1527175377.750 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-24T15:22:58.136Z,1527175378.136 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:22:58.136Z,1527175378.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:22:58.137Z,1527175378.137 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:22:58.137Z,1527175378.137 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:22:58.138Z,1527175378.138 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:22:58.138Z,1527175378.138 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:24:11.710Z,1527175451.710 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T15:19:11.4Z
2018-05-24T15:24:11.710Z,1527175451.710 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T15:24:11.710Z,1527175451.710 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T15:24:16.128Z,1527175456.128 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0274.lzma
2018-05-24T15:24:16.891Z,1527175456.891 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0274.lzma.bak
2018-05-24T15:24:16.891Z,1527175456.891 [DataOverHttps](INFO): SBD MOMSN=8291863
2018-05-24T15:24:25.793Z,1527175465.793 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0275.lzma
2018-05-24T15:24:26.595Z,1527175466.595 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0275.lzma.bak
2018-05-24T15:24:26.595Z,1527175466.595 [DataOverHttps](INFO): SBD MOMSN=8291865
2018-05-24T15:24:27.488Z,1527175467.488 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T15:24:27.488Z,1527175467.488 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T15:24:27.488Z,1527175467.488 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T15:25:58.360Z,1527175558.360 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:25:58.360Z,1527175558.360 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-05-24T15:25:58.360Z,1527175558.360 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:25:58.361Z,1527175558.361 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:25:58.362Z,1527175558.362 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-24T15:25:58.362Z,1527175558.362 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:25:58.424Z,1527175558.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:25:58.424Z,1527175558.424 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:25:58.781Z,1527175558.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:25:58.781Z,1527175558.781 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-05-24T15:25:58.782Z,1527175558.782 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:25:58.782Z,1527175558.782 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-24T15:25:59.179Z,1527175559.179 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:25:59.180Z,1527175559.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:25:59.180Z,1527175559.180 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:25:59.180Z,1527175559.180 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:25:59.181Z,1527175559.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:25:59.181Z,1527175559.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:28:49.863Z,1527175729.863 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T15:28:59.453Z,1527175739.453 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:28:59.453Z,1527175739.453 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-05-24T15:28:59.453Z,1527175739.453 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:28:59.455Z,1527175739.455 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:28:59.455Z,1527175739.455 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-24T15:28:59.455Z,1527175739.455 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:28:59.466Z,1527175739.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:28:59.467Z,1527175739.467 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:28:59.863Z,1527175739.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:28:59.863Z,1527175739.863 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-05-24T15:28:59.864Z,1527175739.864 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:28:59.864Z,1527175739.864 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-24T15:29:00.258Z,1527175740.258 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:29:00.259Z,1527175740.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:29:00.259Z,1527175740.259 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:29:00.260Z,1527175740.260 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:29:00.260Z,1527175740.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:29:00.260Z,1527175740.260 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:29:27.851Z,1527175767.851 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T15:29:27.851Z,1527175767.851 [Default:CheckIn:C.Wait] Stopped
2018-05-24T15:29:27.851Z,1527175767.851 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T15:29:27.852Z,1527175767.852 [Default:CheckIn:D] Running Loop=1
2018-05-24T15:29:28.250Z,1527175768.250 [Default:CheckIn:D] Stopped
2018-05-24T15:29:28.251Z,1527175768.251 [Default:CheckIn:E] Running Loop=1
2018-05-24T15:29:28.652Z,1527175768.652 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 937.835221 min 
2018-05-24T15:29:28.652Z,1527175768.652 [Default:CheckIn:E] Stopped
2018-05-24T15:29:28.652Z,1527175768.652 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T15:29:28.652Z,1527175768.652 [Default:CheckIn] Stopped
2018-05-24T15:29:28.653Z,1527175768.653 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T15:29:28.653Z,1527175768.653 [Default:CheckIn](INFO): Running loop #92
2018-05-24T15:29:28.653Z,1527175768.653 [Default:CheckIn] Running Loop=92
2018-05-24T15:29:28.653Z,1527175768.653 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T15:29:28.653Z,1527175768.653 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T15:32:00.578Z,1527175920.578 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:32:00.578Z,1527175920.578 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-05-24T15:32:00.578Z,1527175920.578 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:32:00.580Z,1527175920.580 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:32:00.580Z,1527175920.580 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-24T15:32:00.580Z,1527175920.580 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:32:00.592Z,1527175920.592 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:32:00.592Z,1527175920.592 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:32:00.992Z,1527175920.992 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:32:00.992Z,1527175920.992 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-05-24T15:32:00.993Z,1527175920.993 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:32:00.994Z,1527175920.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-24T15:32:01.391Z,1527175921.391 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:32:01.391Z,1527175921.391 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:32:01.392Z,1527175921.392 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:32:01.392Z,1527175921.392 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:32:01.392Z,1527175921.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:32:01.393Z,1527175921.393 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:34:28.935Z,1527176068.935 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T15:29:28.7Z
2018-05-24T15:34:28.936Z,1527176068.936 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T15:34:28.936Z,1527176068.936 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T15:34:33.296Z,1527176073.296 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0277.lzma
2018-05-24T15:34:34.067Z,1527176074.067 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0277.lzma.bak
2018-05-24T15:34:34.067Z,1527176074.067 [DataOverHttps](INFO): SBD MOMSN=8291868
2018-05-24T15:34:43.170Z,1527176083.170 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0278.lzma
2018-05-24T15:34:43.970Z,1527176083.970 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0278.lzma.bak
2018-05-24T15:34:43.971Z,1527176083.971 [DataOverHttps](INFO): SBD MOMSN=8291870
2018-05-24T15:34:44.868Z,1527176084.868 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T15:34:44.868Z,1527176084.868 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T15:34:44.868Z,1527176084.868 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T15:35:01.461Z,1527176101.461 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:35:01.461Z,1527176101.461 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-05-24T15:35:01.461Z,1527176101.461 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:35:01.463Z,1527176101.463 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:35:01.463Z,1527176101.463 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-24T15:35:01.463Z,1527176101.463 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:35:01.475Z,1527176101.475 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:35:01.475Z,1527176101.475 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:35:01.876Z,1527176101.876 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:35:01.876Z,1527176101.876 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-05-24T15:35:01.877Z,1527176101.877 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:35:01.877Z,1527176101.877 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-24T15:35:02.241Z,1527176102.241 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:35:02.242Z,1527176102.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:35:02.242Z,1527176102.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:35:02.243Z,1527176102.243 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:35:02.243Z,1527176102.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:35:02.243Z,1527176102.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:38:02.544Z,1527176282.544 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:38:02.544Z,1527176282.544 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-05-24T15:38:02.544Z,1527176282.544 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:38:02.546Z,1527176282.546 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:38:02.546Z,1527176282.546 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-24T15:38:02.546Z,1527176282.546 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:38:02.558Z,1527176282.558 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:38:02.558Z,1527176282.558 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:38:02.958Z,1527176282.958 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:38:02.958Z,1527176282.958 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-05-24T15:38:02.958Z,1527176282.958 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:38:02.958Z,1527176282.958 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-24T15:38:03.347Z,1527176283.347 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:38:03.348Z,1527176283.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:38:03.348Z,1527176283.348 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:38:03.348Z,1527176283.348 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:38:03.349Z,1527176283.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:38:03.349Z,1527176283.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:38:50.141Z,1527176330.141 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T15:39:45.313Z,1527176385.313 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T15:39:45.313Z,1527176385.313 [Default:CheckIn:C.Wait] Stopped
2018-05-24T15:39:45.314Z,1527176385.314 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T15:39:45.314Z,1527176385.314 [Default:CheckIn:D] Running Loop=1
2018-05-24T15:39:45.711Z,1527176385.711 [Default:CheckIn:D] Stopped
2018-05-24T15:39:45.711Z,1527176385.711 [Default:CheckIn:E] Running Loop=1
2018-05-24T15:39:46.114Z,1527176386.114 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 948.126237 min 
2018-05-24T15:39:46.114Z,1527176386.114 [Default:CheckIn:E] Stopped
2018-05-24T15:39:46.114Z,1527176386.114 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T15:39:46.115Z,1527176386.115 [Default:CheckIn] Stopped
2018-05-24T15:39:46.115Z,1527176386.115 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T15:39:46.115Z,1527176386.115 [Default:CheckIn](INFO): Running loop #93
2018-05-24T15:39:46.115Z,1527176386.115 [Default:CheckIn] Running Loop=93
2018-05-24T15:39:46.115Z,1527176386.115 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T15:39:46.115Z,1527176386.115 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T15:41:03.638Z,1527176463.638 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:41:03.638Z,1527176463.638 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-05-24T15:41:03.638Z,1527176463.638 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:41:03.640Z,1527176463.640 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:41:03.640Z,1527176463.640 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-24T15:41:03.640Z,1527176463.640 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:41:03.668Z,1527176463.668 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:41:03.673Z,1527176463.673 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:41:04.088Z,1527176464.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:41:04.088Z,1527176464.088 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-05-24T15:41:04.089Z,1527176464.089 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:41:04.089Z,1527176464.089 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-24T15:41:04.437Z,1527176464.437 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:41:04.438Z,1527176464.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:41:04.438Z,1527176464.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:41:04.438Z,1527176464.438 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:41:04.439Z,1527176464.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:41:04.439Z,1527176464.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:44:04.787Z,1527176644.787 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:44:04.787Z,1527176644.787 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-05-24T15:44:04.787Z,1527176644.787 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:44:04.789Z,1527176644.789 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:44:04.789Z,1527176644.789 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-24T15:44:04.789Z,1527176644.789 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:44:04.848Z,1527176644.848 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:44:04.848Z,1527176644.848 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:44:05.196Z,1527176645.196 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:44:05.196Z,1527176645.196 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-05-24T15:44:05.197Z,1527176645.197 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:44:05.197Z,1527176645.197 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-24T15:44:05.584Z,1527176645.584 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:44:05.585Z,1527176645.585 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:44:05.585Z,1527176645.585 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:44:05.586Z,1527176645.586 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:44:05.586Z,1527176645.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:44:05.586Z,1527176645.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:44:46.392Z,1527176686.392 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T15:39:46.1Z
2018-05-24T15:44:46.392Z,1527176686.392 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T15:44:46.392Z,1527176686.392 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T15:44:50.856Z,1527176690.856 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0280.lzma
2018-05-24T15:44:51.654Z,1527176691.654 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0280.lzma.bak
2018-05-24T15:44:51.655Z,1527176691.655 [DataOverHttps](INFO): SBD MOMSN=8291873
2018-05-24T15:45:00.552Z,1527176700.552 [DataOverHttps](INFO): Sending 99 bytes from file Logs/20180523T234807/Express0281.lzma
2018-05-24T15:45:01.342Z,1527176701.342 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0281.lzma.bak
2018-05-24T15:45:01.343Z,1527176701.343 [DataOverHttps](INFO): SBD MOMSN=8291875
2018-05-24T15:45:02.371Z,1527176702.371 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T15:45:02.371Z,1527176702.371 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T15:45:02.371Z,1527176702.371 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T15:47:06.216Z,1527176826.216 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:47:06.216Z,1527176826.216 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-05-24T15:47:06.216Z,1527176826.216 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:47:06.219Z,1527176826.219 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:47:06.219Z,1527176826.219 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-24T15:47:06.219Z,1527176826.219 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:47:06.232Z,1527176826.232 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:47:06.232Z,1527176826.232 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:47:06.377Z,1527176826.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:47:06.377Z,1527176826.377 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-05-24T15:47:06.378Z,1527176826.378 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:47:06.378Z,1527176826.378 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-24T15:47:06.687Z,1527176826.687 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:47:06.687Z,1527176826.687 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:47:06.688Z,1527176826.688 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:47:06.688Z,1527176826.688 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:47:06.688Z,1527176826.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:47:06.689Z,1527176826.689 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:48:50.319Z,1527176930.319 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T15:50:02.718Z,1527177002.718 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T15:50:02.718Z,1527177002.718 [Default:CheckIn:C.Wait] Stopped
2018-05-24T15:50:02.718Z,1527177002.718 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T15:50:02.718Z,1527177002.718 [Default:CheckIn:D] Running Loop=1
2018-05-24T15:50:03.116Z,1527177003.116 [Default:CheckIn:D] Stopped
2018-05-24T15:50:03.116Z,1527177003.116 [Default:CheckIn:E] Running Loop=1
2018-05-24T15:50:03.519Z,1527177003.519 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 958.416341 min 
2018-05-24T15:50:03.519Z,1527177003.519 [Default:CheckIn:E] Stopped
2018-05-24T15:50:03.519Z,1527177003.519 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T15:50:03.519Z,1527177003.519 [Default:CheckIn] Stopped
2018-05-24T15:50:03.519Z,1527177003.519 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T15:50:03.519Z,1527177003.519 [Default:CheckIn](INFO): Running loop #94
2018-05-24T15:50:03.519Z,1527177003.519 [Default:CheckIn] Running Loop=94
2018-05-24T15:50:03.520Z,1527177003.520 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T15:50:03.520Z,1527177003.520 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T15:50:07.020Z,1527177007.020 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:50:07.020Z,1527177007.020 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-05-24T15:50:07.021Z,1527177007.021 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:50:07.022Z,1527177007.022 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:50:07.022Z,1527177007.022 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-24T15:50:07.023Z,1527177007.023 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:50:07.066Z,1527177007.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:50:07.067Z,1527177007.067 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:50:07.178Z,1527177007.178 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T15:50:07.178Z,1527177007.178 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-05-24T15:50:07.178Z,1527177007.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T15:50:07.178Z,1527177007.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-24T15:50:07.529Z,1527177007.529 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T15:50:07.529Z,1527177007.529 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:50:07.530Z,1527177007.530 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:50:07.530Z,1527177007.530 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T15:50:07.530Z,1527177007.530 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T15:50:07.531Z,1527177007.531 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T15:53:07.549Z,1527177187.549 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:53:07.549Z,1527177187.549 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-05-24T15:53:07.549Z,1527177187.549 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T15:53:07.551Z,1527177187.551 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T15:53:07.551Z,1527177187.551 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-24T15:53:07.551Z,1527177187.551 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T15:53:07.563Z,1527177187.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:53:07.563Z,1527177187.563 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T15:53:07.564Z,1527177187.564 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:53:07.564Z,1527177187.564 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T15:54:25.091Z,1527177265.091 [CommandLine](IMPORTANT): got command get NAL9602.loadAtStartup
2018-05-24T15:54:25.092Z,1527177265.092 [CommandLine](IMPORTANT): NAL9602.loadAtStartup 0 bool
2018-05-24T15:55:03.872Z,1527177303.872 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T15:50:03.5Z
2018-05-24T15:55:03.872Z,1527177303.872 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T15:55:03.872Z,1527177303.872 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T15:55:30.596Z,1527177330.596 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0283.lzma
2018-05-24T15:55:31.395Z,1527177331.395 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0283.lzma.bak
2018-05-24T15:55:31.395Z,1527177331.395 [DataOverHttps](INFO): SBD MOMSN=8291878
2018-05-24T15:55:42.377Z,1527177342.377 [DataOverHttps](INFO): Sending 233 bytes from file Logs/20180523T234807/Express0284.lzma
2018-05-24T15:55:43.174Z,1527177343.174 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0284.lzma.bak
2018-05-24T15:55:43.175Z,1527177343.175 [DataOverHttps](INFO): SBD MOMSN=8291880
2018-05-24T15:55:44.069Z,1527177344.069 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T15:55:44.069Z,1527177344.069 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T15:55:44.069Z,1527177344.069 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T15:58:50.597Z,1527177530.597 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T16:00:44.343Z,1527177644.343 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T16:00:44.343Z,1527177644.343 [Default:CheckIn:C.Wait] Stopped
2018-05-24T16:00:44.343Z,1527177644.343 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T16:00:44.343Z,1527177644.343 [Default:CheckIn:D] Running Loop=1
2018-05-24T16:00:44.742Z,1527177644.742 [Default:CheckIn:D] Stopped
2018-05-24T16:00:44.742Z,1527177644.742 [Default:CheckIn:E] Running Loop=1
2018-05-24T16:00:45.142Z,1527177645.142 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 969.110091 min 
2018-05-24T16:00:45.142Z,1527177645.142 [Default:CheckIn:E] Stopped
2018-05-24T16:00:45.142Z,1527177645.142 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T16:00:45.143Z,1527177645.143 [Default:CheckIn] Stopped
2018-05-24T16:00:45.143Z,1527177645.143 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T16:00:45.143Z,1527177645.143 [Default:CheckIn](INFO): Running loop #95
2018-05-24T16:00:45.143Z,1527177645.143 [Default:CheckIn] Running Loop=95
2018-05-24T16:00:45.143Z,1527177645.143 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T16:00:45.143Z,1527177645.143 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T16:05:45.171Z,1527177945.171 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-24T16:00:45.1Z
2018-05-24T16:05:45.171Z,1527177945.171 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T16:05:45.171Z,1527177945.171 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-24T16:05:49.892Z,1527177949.892 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180523T234807/Courier0286.lzma
2018-05-24T16:05:50.690Z,1527177950.690 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Courier0286.lzma.bak
2018-05-24T16:05:50.691Z,1527177950.691 [DataOverHttps](INFO): SBD MOMSN=8291887
2018-05-24T16:05:59.705Z,1527177959.705 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180523T234807/Express0287.lzma
2018-05-24T16:06:00.506Z,1527177960.506 [DataOverHttps](INFO): Moved sent file to Logs/20180523T234807/Express0287.lzma.bak
2018-05-24T16:06:00.507Z,1527177960.507 [DataOverHttps](INFO): SBD MOMSN=8291889
2018-05-24T16:06:01.403Z,1527177961.403 [Default:CheckIn:Read_Iridium] Stopped
2018-05-24T16:06:01.403Z,1527177961.403 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-24T16:06:01.403Z,1527177961.403 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-24T16:08:07.834Z,1527178087.834 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T16:08:07.834Z,1527178087.834 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-05-24T16:08:07.834Z,1527178087.834 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T16:08:07.834Z,1527178087.834 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-24T16:08:08.222Z,1527178088.222 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T16:08:08.222Z,1527178088.222 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T16:08:08.223Z,1527178088.223 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T16:08:08.223Z,1527178088.223 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T16:08:08.224Z,1527178088.224 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T16:08:08.224Z,1527178088.224 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T16:08:50.660Z,1527178130.660 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-24T16:11:01.750Z,1527178261.750 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-24T16:11:01.750Z,1527178261.750 [Default:CheckIn:C.Wait] Stopped
2018-05-24T16:11:01.750Z,1527178261.750 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-24T16:11:01.750Z,1527178261.750 [Default:CheckIn:D] Running Loop=1
2018-05-24T16:11:02.151Z,1527178262.151 [Default:CheckIn:D] Stopped
2018-05-24T16:11:02.151Z,1527178262.151 [Default:CheckIn:E] Running Loop=1
2018-05-24T16:11:02.551Z,1527178262.551 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 979.400195 min 
2018-05-24T16:11:02.551Z,1527178262.551 [Default:CheckIn:E] Stopped
2018-05-24T16:11:02.551Z,1527178262.551 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-24T16:11:02.551Z,1527178262.551 [Default:CheckIn] Stopped
2018-05-24T16:11:02.551Z,1527178262.551 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T16:11:02.551Z,1527178262.551 [Default:CheckIn](INFO): Running loop #96
2018-05-24T16:11:02.551Z,1527178262.551 [Default:CheckIn] Running Loop=96
2018-05-24T16:11:02.552Z,1527178262.552 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-24T16:11:02.552Z,1527178262.552 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-24T16:11:08.547Z,1527178268.547 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T16:11:08.547Z,1527178268.547 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-05-24T16:11:08.547Z,1527178268.547 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T16:11:08.549Z,1527178268.549 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T16:11:08.549Z,1527178268.549 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-24T16:11:08.549Z,1527178268.549 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T16:11:08.560Z,1527178268.560 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T16:11:08.561Z,1527178268.561 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T16:11:08.953Z,1527178268.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T16:11:08.953Z,1527178268.953 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-05-24T16:11:08.953Z,1527178268.953 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T16:11:08.953Z,1527178268.953 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-24T16:11:09.348Z,1527178269.348 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T16:11:09.349Z,1527178269.349 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T16:11:09.349Z,1527178269.349 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T16:11:09.350Z,1527178269.350 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T16:11:09.350Z,1527178269.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T16:11:09.350Z,1527178269.350 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T16:14:09.678Z,1527178449.678 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T16:14:09.679Z,1527178449.679 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-05-24T16:14:09.679Z,1527178449.679 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-05-24T16:14:09.680Z,1527178449.680 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-24T16:14:09.680Z,1527178449.680 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-24T16:14:09.680Z,1527178449.680 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-24T16:14:09.692Z,1527178449.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-05-24T16:14:09.692Z,1527178449.692 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-24T16:14:10.097Z,1527178450.097 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-05-24T16:14:10.097Z,1527178450.097 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-05-24T16:14:10.098Z,1527178450.098 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-24T16:14:10.098Z,1527178450.098 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-24T16:14:10.486Z,1527178450.486 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-05-24T16:14:10.486Z,1527178450.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T16:14:10.486Z,1527178450.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T16:14:10.487Z,1527178450.487 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-24T16:14:10.487Z,1527178450.487 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-24T16:14:10.487Z,1527178450.487 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-24T16:14:59.154Z,1527178499.154 [CommandLine](IMPORTANT): got command configSet NAL9602.loadAtStartup 1.000000 bool persist
2018-05-24T16:14:59.154Z,1527178499.154 [CommandLine](IMPORTANT): configSet NAL9602.loadAtStartup requires a restart to take effect.
2018-05-24T16:15:13.233Z,1527178513.233 [CommandLine](IMPORTANT): got command restart application
2018-05-24T16:15:14.249Z,1527178514.249 [Supervisor](INFO): Stop Mission called by Supervisor::terminate
2018-05-24T16:15:14.252Z,1527178514.252 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2018-05-24T16:15:14.252Z,1527178514.252 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:14.389Z,1527178514.389 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2018-05-24T16:15:14.389Z,1527178514.389 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:14.390Z,1527178514.390 [CommandLine](INFO): Join timeout helper Thread ID is 1515
2018-05-24T16:15:14.391Z,1527178514.391 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2018-05-24T16:15:14.391Z,1527178514.391 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:14.391Z,1527178514.391 [NavChartDb](INFO): Join timeout helper Thread ID is 1516
2018-05-24T16:15:14.709Z,1527178514.709 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2018-05-24T16:15:14.709Z,1527178514.709 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:14.721Z,1527178514.721 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2018-05-24T16:15:14.721Z,1527178514.721 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:14.721Z,1527178514.721 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 1518
2018-05-24T16:15:14.825Z,1527178514.825 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2018-05-24T16:15:14.825Z,1527178514.825 [WetLabsBB2FL](INFO): Powering down
2018-05-24T16:15:14.826Z,1527178514.826 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:14.837Z,1527178514.837 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2018-05-24T16:15:14.838Z,1527178514.838 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:14.838Z,1527178514.838 [CTD_Seabird](INFO): Join timeout helper Thread ID is 1519
2018-05-24T16:15:15.181Z,1527178515.181 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2018-05-24T16:15:15.513Z,1527178515.513 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-05-24T16:15:15.513Z,1527178515.513 [CTD_Seabird](INFO): Powering down
2018-05-24T16:15:15.514Z,1527178515.514 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.525Z,1527178515.525 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2018-05-24T16:15:15.525Z,1527178515.525 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.526Z,1527178515.526 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 1523
2018-05-24T16:15:15.653Z,1527178515.653 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2018-05-24T16:15:15.653Z,1527178515.653 [CTD_NeilBrown](INFO): Powering down
2018-05-24T16:15:15.654Z,1527178515.654 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.656Z,1527178515.656 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2018-05-24T16:15:15.656Z,1527178515.656 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.656Z,1527178515.656 [Radio_Surface](INFO): Join timeout helper Thread ID is 1524
2018-05-24T16:15:15.673Z,1527178515.673 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2018-05-24T16:15:15.673Z,1527178515.673 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.675Z,1527178515.675 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2018-05-24T16:15:15.675Z,1527178515.675 [logger ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.675Z,1527178515.675 [logger](INFO): Join timeout helper Thread ID is 1525
2018-05-24T16:15:15.677Z,1527178515.677 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2018-05-24T16:15:15.677Z,1527178515.677 [logger ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.682Z,1527178515.682 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2018-05-24T16:15:15.682Z,1527178515.682 [CommandLine ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.682Z,1527178515.682 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2018-05-24T16:15:15.682Z,1527178515.682 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.682Z,1527178515.682 [controlThread](INFO): Join timeout helper Thread ID is 1526
2018-05-24T16:15:15.687Z,1527178515.687 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2018-05-24T16:15:15.687Z,1527178515.687 [controlThread](DEBUG): Uninitializing ControlThread
2018-05-24T16:15:15.688Z,1527178515.688 [PNI_TCM](INFO): Powering down
2018-05-24T16:15:15.785Z,1527178515.785 [Aanderaa_O2](INFO): Powering down
2018-05-24T16:15:15.788Z,1527178515.788 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-05-24T16:15:15.789Z,1527178515.789 [ElevatorOffsetCalculator](DEBUG): Uninitializing ElevatorOffsetCalculator.
2018-05-24T16:15:15.790Z,1527178515.790 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2018-05-24T16:15:15.791Z,1527178515.791 [MissionManager](INFO): Uninitializing Mission Default
2018-05-24T16:15:15.791Z,1527178515.791 [Default] Stopped
2018-05-24T16:15:15.791Z,1527178515.791 [Default](DEBUG): Aggregate::uninitialize Default
2018-05-24T16:15:15.791Z,1527178515.791 [Default:B.GoToSurface] Stopped
2018-05-24T16:15:15.791Z,1527178515.791 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-05-24T16:15:15.791Z,1527178515.791 [Default:CheckIn] Stopped
2018-05-24T16:15:15.791Z,1527178515.791 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-24T16:15:15.791Z,1527178515.791 [Default:CheckIn:Read_GPS] Stopped
2018-05-24T16:15:15.795Z,1527178515.795 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2018-05-24T16:15:15.795Z,1527178515.795 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2018-05-24T16:15:15.795Z,1527178515.795 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2018-05-24T16:15:15.796Z,1527178515.796 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2018-05-24T16:15:15.796Z,1527178515.796 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-05-24T16:15:15.796Z,1527178515.796 [BuoyancyServo](INFO): Powering down
2018-05-24T16:15:15.809Z,1527178515.809 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2018-05-24T16:15:15.809Z,1527178515.809 [ElevatorServo](INFO): Powering down
2018-05-24T16:15:15.810Z,1527178515.810 [MassServo](DEBUG): Uninitialize Mass Servo.
2018-05-24T16:15:15.810Z,1527178515.810 [MassServo](INFO): Powering down
2018-05-24T16:15:15.811Z,1527178515.811 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2018-05-24T16:15:15.811Z,1527178515.811 [RudderServo](INFO): Powering down
2018-05-24T16:15:15.812Z,1527178515.812 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-05-24T16:15:15.812Z,1527178515.812 [ThrusterServo](INFO): Powering down
2018-05-24T16:15:15.813Z,1527178515.813 [SBIT](DEBUG): Uninitialize SBIT Component.
2018-05-24T16:15:15.813Z,1527178515.813 [IBIT](DEBUG): Uninitialize IBIT Component.
2018-05-24T16:15:15.814Z,1527178515.814 [CBIT](DEBUG): Uninitialize CBIT Component.
2018-05-24T16:15:15.815Z,1527178515.815 [controlThread ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:15.965Z,1527178515.965 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:16.099Z,1527178516.099 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:16.113Z,1527178516.113 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:16.116Z,1527178516.116 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:16.167Z,1527178516.167 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2018-05-24T16:15:16.264Z,1527178516.264 [logger ThreadHandler](INFO): Thread cancelled.