2018-05-20T23:41:32.878Z,1526859692.878 [Default](DEBUG): Aggregate::uninitialize Default
2018-05-20T23:41:32.878Z,1526859692.878 [Default:B.GoToSurface] Stopped
2018-05-20T23:41:32.878Z,1526859692.878 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-05-20T23:41:32.955Z,1526859692.955 [CommandLine](IMPORTANT): got command restart logs
2018-05-20T23:41:33.041Z,1526859693.041 [MissionManager](IMPORTANT): Started mission Default
2018-05-20T23:41:33.041Z,1526859693.041 [Default] Running Loop=1
2018-05-20T23:41:33.041Z,1526859693.041 [Default](DEBUG): Aggregate::initialize Default
2018-05-20T23:41:33.041Z,1526859693.041 [Default:B.GoToSurface] Running Loop=1
2018-05-20T23:41:33.041Z,1526859693.041 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-05-20T23:41:33.041Z,1526859693.041 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-05-20T23:41:33.042Z,1526859693.042 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-05-20T23:41:33.046Z,1526859693.046 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-05-20T23:41:33.047Z,1526859693.047 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-05-20T23:41:33.047Z,1526859693.047 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-05-20T23:41:33.047Z,1526859693.047 [Default:A.Wait] Running Loop=1
2018-05-20T23:41:33.047Z,1526859693.047 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-05-20T23:41:46.151Z,1526859706.151 [Default:A.Wait](INFO): Done Waiting.
2018-05-20T23:41:46.151Z,1526859706.151 [Default:A.Wait] Stopped
2018-05-20T23:41:46.151Z,1526859706.151 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-05-20T23:41:46.551Z,1526859706.551 [Default:CheckIn] Running Loop=1
2018-05-20T23:41:46.551Z,1526859706.551 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-20T23:41:46.551Z,1526859706.551 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-20T23:41:47.299Z,1526859707.299 [NAL9602](INFO): Powering up
2018-05-20T23:41:58.507Z,1526859718.507 [NAL9602](INFO): NAL9602 initialized
2018-05-20T23:42:33.284Z,1526859753.284 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-20T23:42:33.362Z,1526859753.362 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-20T23:42:33.362Z,1526859753.362 [NAL9602] Data Fault, FailCount= 1
2018-05-20T23:42:33.362Z,1526859753.362 [NAL9602](ERROR): Data Fault
2018-05-20T23:42:33.462Z,1526859753.462 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-20T23:42:33.515Z,1526859753.515 [NAL9602](INFO): Powering down
2018-05-20T23:42:34.331Z,1526859754.331 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-20T23:42:34.331Z,1526859754.331 [NAL9602] No Fault, FailCount= 1
2018-05-20T23:43:03.887Z,1526859783.887 [NAL9602](INFO): Powering up NAL9602
2018-05-20T23:43:15.076Z,1526859795.076 [NAL9602](INFO): NAL9602 initialized
2018-05-20T23:44:20.154Z,1526859860.154 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-20T23:46:46.564Z,1526860006.564 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-20T23:41:46.6Z
2018-05-20T23:46:46.564Z,1526860006.564 [Default:CheckIn:Read_GPS] Stopped
2018-05-20T23:46:46.564Z,1526860006.564 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-20T23:46:50.994Z,1526860010.994 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180518T232615/Courier0852.lzma
2018-05-20T23:46:51.768Z,1526860011.768 [DataOverHttps](INFO): Moved sent file to Logs/20180518T232615/Courier0852.lzma.bak
2018-05-20T23:46:51.768Z,1526860011.768 [DataOverHttps](INFO): SBD MOMSN=8287654
2018-05-20T23:47:02.339Z,1526860022.339 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-20T23:47:10.576Z,1526860030.576 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0000.lzma
2018-05-20T23:47:11.377Z,1526860031.377 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0000.lzma.bak
2018-05-20T23:47:11.377Z,1526860031.377 [DataOverHttps](INFO): SBD MOMSN=8287656
2018-05-20T23:47:20.230Z,1526860040.230 [DataOverHttps](INFO): Sending 301 bytes from file Logs/20180518T232615/Express0853.lzma
2018-05-20T23:47:21.014Z,1526860041.014 [DataOverHttps](INFO): Moved sent file to Logs/20180518T232615/Express0853.lzma.bak
2018-05-20T23:47:21.014Z,1526860041.014 [DataOverHttps](INFO): SBD MOMSN=8287659
2018-05-20T23:47:29.807Z,1526860049.807 [DataOverHttps](INFO): Sending 352 bytes from file Logs/20180520T234132/Express0001.lzma
2018-05-20T23:47:30.608Z,1526860050.608 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0001.lzma.bak
2018-05-20T23:47:30.608Z,1526860050.608 [DataOverHttps](INFO): SBD MOMSN=8287665
2018-05-20T23:47:31.275Z,1526860051.275 [Default:CheckIn:Read_Iridium] Stopped
2018-05-20T23:47:31.275Z,1526860051.275 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-20T23:47:31.275Z,1526860051.275 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-20T23:47:35.991Z,1526860055.991 [NAL9602](INFO): Powering down
2018-05-20T23:51:54.491Z,1526860314.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-20T23:51:54.491Z,1526860314.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-20T23:51:54.868Z,1526860314.868 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-20T23:51:54.869Z,1526860314.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-20T23:51:54.869Z,1526860314.869 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-20T23:52:31.675Z,1526860351.675 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-20T23:52:31.675Z,1526860351.675 [Default:CheckIn:C.Wait] Stopped
2018-05-20T23:52:31.675Z,1526860351.675 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-20T23:52:31.676Z,1526860351.676 [Default:CheckIn:D] Running Loop=1
2018-05-20T23:52:32.097Z,1526860352.097 [Default:CheckIn:D] Stopped
2018-05-20T23:52:32.097Z,1526860352.097 [Default:CheckIn:E] Running Loop=1
2018-05-20T23:52:32.471Z,1526860352.471 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.984268 min 
2018-05-20T23:52:32.472Z,1526860352.472 [Default:CheckIn:E] Stopped
2018-05-20T23:52:32.472Z,1526860352.472 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-20T23:52:32.472Z,1526860352.472 [Default:CheckIn] Stopped
2018-05-20T23:52:32.472Z,1526860352.472 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-20T23:52:32.472Z,1526860352.472 [Default:CheckIn](INFO): Running loop #2
2018-05-20T23:52:32.472Z,1526860352.472 [Default:CheckIn] Running Loop=2
2018-05-20T23:52:32.472Z,1526860352.472 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-20T23:52:32.473Z,1526860352.473 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-20T23:52:35.967Z,1526860355.967 [NAL9602](INFO): Powering up
2018-05-20T23:52:46.896Z,1526860366.896 [NAL9602](INFO): NAL9602 initialized
2018-05-20T23:52:47.696Z,1526860367.696 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-20T23:52:47.696Z,1526860367.696 [NAL9602] Data Fault, FailCount= 2
2018-05-20T23:52:47.696Z,1526860367.696 [NAL9602](ERROR): Data Fault
2018-05-20T23:52:47.787Z,1526860367.787 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-20T23:52:48.097Z,1526860368.097 [NAL9602](INFO): Powering down
2018-05-20T23:52:48.980Z,1526860368.980 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-20T23:52:48.980Z,1526860368.980 [NAL9602] No Fault, FailCount= 2
2018-05-20T23:53:18.496Z,1526860398.496 [NAL9602](INFO): Powering up NAL9602
2018-05-20T23:53:29.703Z,1526860409.703 [NAL9602](INFO): NAL9602 initialized
2018-05-20T23:54:20.175Z,1526860460.175 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-20T23:54:55.085Z,1526860495.085 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-20T23:54:55.085Z,1526860495.085 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-20T23:54:55.085Z,1526860495.085 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-20T23:54:55.099Z,1526860495.099 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-20T23:54:55.495Z,1526860495.495 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-20T23:54:55.495Z,1526860495.495 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-20T23:54:55.880Z,1526860495.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-20T23:54:55.880Z,1526860495.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-20T23:54:55.880Z,1526860495.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-20T23:57:32.480Z,1526860652.480 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-20T23:52:32.5Z
2018-05-20T23:57:32.480Z,1526860652.480 [Default:CheckIn:Read_GPS] Stopped
2018-05-20T23:57:32.480Z,1526860652.480 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-20T23:57:36.512Z,1526860656.512 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0003.lzma
2018-05-20T23:57:37.303Z,1526860657.303 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0003.lzma.bak
2018-05-20T23:57:37.304Z,1526860657.304 [DataOverHttps](INFO): SBD MOMSN=8287670
2018-05-20T23:57:46.298Z,1526860666.298 [DataOverHttps](INFO): Sending 245 bytes from file Logs/20180520T234132/Express0004.lzma
2018-05-20T23:57:47.087Z,1526860667.087 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0004.lzma.bak
2018-05-20T23:57:47.088Z,1526860667.088 [DataOverHttps](INFO): SBD MOMSN=8287672
2018-05-20T23:57:47.785Z,1526860667.785 [Default:CheckIn:Read_Iridium] Stopped
2018-05-20T23:57:47.786Z,1526860667.786 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-20T23:57:47.786Z,1526860667.786 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-20T23:57:56.019Z,1526860676.019 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-20T23:57:56.019Z,1526860676.019 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-20T23:57:56.019Z,1526860676.019 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-20T23:57:56.041Z,1526860676.041 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-20T23:57:56.428Z,1526860676.428 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-20T23:57:56.428Z,1526860676.428 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-20T23:57:56.806Z,1526860676.806 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-20T23:57:56.807Z,1526860676.807 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-20T23:57:56.807Z,1526860676.807 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-20T23:58:36.352Z,1526860716.352 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-20T23:58:48.384Z,1526860728.384 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-20T23:58:48.384Z,1526860728.384 [BPC1] Communications Fault, FailCount= 1
2018-05-20T23:58:48.384Z,1526860728.384 [BPC1](ERROR): Communications Fault
2018-05-20T23:58:48.472Z,1526860728.472 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-20T23:58:52.016Z,1526860732.016 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-20T23:58:52.016Z,1526860732.016 [BPC1] No Fault, FailCount= 1
2018-05-20T23:59:06.764Z,1526860746.764 [NAL9602](INFO): Powering down
2018-05-21T00:00:57.202Z,1526860857.202 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:00:57.202Z,1526860857.202 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T00:00:57.203Z,1526860857.203 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:00:57.234Z,1526860857.234 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:00:57.609Z,1526860857.609 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:00:57.609Z,1526860857.609 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T00:00:57.994Z,1526860857.994 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:00:57.995Z,1526860857.995 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:00:57.995Z,1526860857.995 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:02:47.981Z,1526860967.981 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T00:02:47.981Z,1526860967.981 [Default:CheckIn:C.Wait] Stopped
2018-05-21T00:02:47.981Z,1526860967.981 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T00:02:47.982Z,1526860967.982 [Default:CheckIn:D] Running Loop=1
2018-05-21T00:02:48.411Z,1526860968.411 [Default:CheckIn:D] Stopped
2018-05-21T00:02:48.411Z,1526860968.411 [Default:CheckIn:E] Running Loop=1
2018-05-21T00:02:48.791Z,1526860968.791 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.256158 min 
2018-05-21T00:02:48.791Z,1526860968.791 [Default:CheckIn:E] Stopped
2018-05-21T00:02:48.791Z,1526860968.791 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T00:02:48.791Z,1526860968.791 [Default:CheckIn] Stopped
2018-05-21T00:02:48.791Z,1526860968.791 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T00:02:48.792Z,1526860968.792 [Default:CheckIn](INFO): Running loop #3
2018-05-21T00:02:48.792Z,1526860968.792 [Default:CheckIn] Running Loop=3
2018-05-21T00:02:48.792Z,1526860968.792 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T00:02:48.792Z,1526860968.792 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T00:02:52.317Z,1526860972.317 [NAL9602](INFO): Powering up
2018-05-21T00:03:03.208Z,1526860983.208 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:03:35.207Z,1526861015.207 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T00:03:35.286Z,1526861015.286 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T00:03:35.286Z,1526861015.286 [NAL9602] Data Fault, FailCount= 3
2018-05-21T00:03:35.286Z,1526861015.286 [NAL9602](ERROR): Data Fault
2018-05-21T00:03:35.374Z,1526861015.374 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:03:35.603Z,1526861015.603 [NAL9602](INFO): Powering down
2018-05-21T00:03:36.498Z,1526861016.498 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:03:36.498Z,1526861016.498 [NAL9602] No Fault, FailCount= 3
2018-05-21T00:03:58.217Z,1526861038.217 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:03:58.217Z,1526861038.217 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T00:03:58.217Z,1526861038.217 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:03:58.229Z,1526861038.229 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:03:58.660Z,1526861038.660 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:03:58.660Z,1526861038.660 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T00:03:59.013Z,1526861039.013 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:03:59.014Z,1526861039.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:03:59.014Z,1526861039.014 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:04:05.767Z,1526861045.767 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:04:16.968Z,1526861056.968 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:04:17.768Z,1526861057.768 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T00:04:17.768Z,1526861057.768 [NAL9602] Data Fault, FailCount= 4
2018-05-21T00:04:17.768Z,1526861057.768 [NAL9602](ERROR): Data Fault
2018-05-21T00:04:17.853Z,1526861057.853 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:04:18.167Z,1526861058.167 [NAL9602](INFO): Powering down
2018-05-21T00:04:19.038Z,1526861059.038 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:04:19.038Z,1526861059.038 [NAL9602] No Fault, FailCount= 4
2018-05-21T00:04:20.238Z,1526861060.238 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T00:04:48.567Z,1526861088.567 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:04:59.748Z,1526861099.748 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:06:17.134Z,1526861177.134 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T00:06:17.134Z,1526861177.134 [BPC1] Communications Fault, FailCount= 2
2018-05-21T00:06:17.134Z,1526861177.134 [BPC1](ERROR): Communications Fault
2018-05-21T00:06:17.159Z,1526861177.159 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T00:06:18.352Z,1526861178.352 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T00:06:18.353Z,1526861178.353 [BPC1] No Fault, FailCount= 2
2018-05-21T00:06:59.160Z,1526861219.160 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:06:59.160Z,1526861219.160 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T00:06:59.161Z,1526861219.161 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:06:59.189Z,1526861219.189 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:06:59.553Z,1526861219.553 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:06:59.553Z,1526861219.553 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T00:06:59.937Z,1526861219.937 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:06:59.937Z,1526861219.937 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:06:59.938Z,1526861219.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:07:49.175Z,1526861269.175 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T00:02:48.8Z
2018-05-21T00:07:49.175Z,1526861269.175 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T00:07:49.175Z,1526861269.175 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T00:07:53.595Z,1526861273.595 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0006.lzma
2018-05-21T00:07:54.395Z,1526861274.395 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0006.lzma.bak
2018-05-21T00:07:54.396Z,1526861274.396 [DataOverHttps](INFO): SBD MOMSN=8287677
2018-05-21T00:08:03.303Z,1526861283.303 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0007.lzma
2018-05-21T00:08:04.080Z,1526861284.080 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0007.lzma.bak
2018-05-21T00:08:04.080Z,1526861284.080 [DataOverHttps](INFO): SBD MOMSN=8287679
2018-05-21T00:08:04.764Z,1526861284.764 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T00:08:04.764Z,1526861284.764 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T00:08:04.764Z,1526861284.764 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T00:08:08.269Z,1526861288.269 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T00:08:38.767Z,1526861318.767 [NAL9602](INFO): Powering down
2018-05-21T00:10:00.077Z,1526861400.077 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:10:00.078Z,1526861400.078 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T00:10:00.078Z,1526861400.078 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:10:00.091Z,1526861400.091 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:10:00.498Z,1526861400.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:10:00.498Z,1526861400.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T00:10:00.880Z,1526861400.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:10:00.881Z,1526861400.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:10:00.881Z,1526861400.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:13:01.220Z,1526861581.220 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:13:01.220Z,1526861581.220 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T00:13:01.220Z,1526861581.220 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:13:01.232Z,1526861581.232 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:13:01.631Z,1526861581.631 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:13:01.632Z,1526861581.632 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T00:13:02.021Z,1526861582.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:13:02.022Z,1526861582.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:13:02.022Z,1526861582.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:13:05.232Z,1526861585.232 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T00:13:05.233Z,1526861585.233 [Default:CheckIn:C.Wait] Stopped
2018-05-21T00:13:05.233Z,1526861585.233 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T00:13:05.233Z,1526861585.233 [Default:CheckIn:D] Running Loop=1
2018-05-21T00:13:05.623Z,1526861585.623 [Default:CheckIn:D] Stopped
2018-05-21T00:13:05.623Z,1526861585.623 [Default:CheckIn:E] Running Loop=1
2018-05-21T00:13:06.029Z,1526861586.029 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.543036 min 
2018-05-21T00:13:06.029Z,1526861586.029 [Default:CheckIn:E] Stopped
2018-05-21T00:13:06.029Z,1526861586.029 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T00:13:06.030Z,1526861586.030 [Default:CheckIn] Stopped
2018-05-21T00:13:06.030Z,1526861586.030 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T00:13:06.030Z,1526861586.030 [Default:CheckIn](INFO): Running loop #4
2018-05-21T00:13:06.030Z,1526861586.030 [Default:CheckIn] Running Loop=4
2018-05-21T00:13:06.030Z,1526861586.030 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T00:13:06.030Z,1526861586.030 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T00:13:09.564Z,1526861589.564 [NAL9602](INFO): Powering up
2018-05-21T00:13:20.468Z,1526861600.468 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:13:52.462Z,1526861632.462 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T00:13:52.542Z,1526861632.542 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T00:13:52.542Z,1526861632.542 [NAL9602] Data Fault, FailCount= 5
2018-05-21T00:13:52.542Z,1526861632.542 [NAL9602](ERROR): Data Fault
2018-05-21T00:13:52.627Z,1526861632.627 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:13:52.627Z,1526861632.627 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T00:13:52.863Z,1526861632.863 [NAL9602](INFO): Powering down
2018-05-21T00:13:52.925Z,1526861632.925 [CBIT](INFO): Critical error at 20180521T001352
2018-05-21T00:14:20.289Z,1526861660.289 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T00:14:41.455Z,1526861681.455 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T00:14:41.455Z,1526861681.455 [BPC1] Communications Fault, FailCount= 3
2018-05-21T00:14:41.455Z,1526861681.455 [BPC1](ERROR): Communications Fault
2018-05-21T00:14:41.482Z,1526861681.482 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T00:14:42.682Z,1526861682.682 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T00:14:42.682Z,1526861682.682 [BPC1] No Fault, FailCount= 3
2018-05-21T00:15:52.580Z,1526861752.580 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:15:52.580Z,1526861752.580 [NAL9602] No Fault, FailCount= 5
2018-05-21T00:15:52.923Z,1526861752.923 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:16:02.165Z,1526861762.165 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:16:02.165Z,1526861762.165 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T00:16:02.165Z,1526861762.165 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:16:02.193Z,1526861762.193 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:16:02.607Z,1526861762.607 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:16:02.607Z,1526861762.607 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T00:16:02.960Z,1526861762.960 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:16:02.961Z,1526861762.961 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:16:02.961Z,1526861762.961 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:16:03.731Z,1526861763.731 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:16:04.524Z,1526861764.524 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T00:16:04.524Z,1526861764.524 [NAL9602] Data Fault, FailCount= 1
2018-05-21T00:16:04.524Z,1526861764.524 [NAL9602](ERROR): Data Fault
2018-05-21T00:16:04.612Z,1526861764.612 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:16:04.923Z,1526861764.923 [NAL9602](INFO): Powering down
2018-05-21T00:16:05.784Z,1526861765.784 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:16:05.784Z,1526861765.784 [NAL9602] No Fault, FailCount= 1
2018-05-21T00:16:34.996Z,1526861794.996 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:16:46.196Z,1526861806.196 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:18:06.295Z,1526861886.295 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T00:13:06.0Z
2018-05-21T00:18:06.295Z,1526861886.295 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T00:18:06.295Z,1526861886.295 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T00:18:10.190Z,1526861890.190 [DataOverHttps](INFO): Sending 93 bytes from file Logs/20180520T234132/Courier0009.lzma
2018-05-21T00:18:10.987Z,1526861890.987 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0009.lzma.bak
2018-05-21T00:18:10.988Z,1526861890.988 [DataOverHttps](INFO): SBD MOMSN=8287685
2018-05-21T00:18:19.883Z,1526861899.883 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0010.lzma
2018-05-21T00:18:20.675Z,1526861900.675 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0010.lzma.bak
2018-05-21T00:18:20.676Z,1526861900.676 [DataOverHttps](INFO): SBD MOMSN=8287688
2018-05-21T00:18:21.344Z,1526861901.344 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T00:18:21.344Z,1526861901.344 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T00:18:21.344Z,1526861901.344 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T00:18:24.583Z,1526861904.583 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T00:18:55.064Z,1526861935.064 [NAL9602](INFO): Powering down
2018-05-21T00:19:03.106Z,1526861943.106 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:19:03.106Z,1526861943.106 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T00:19:03.106Z,1526861943.106 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:19:03.119Z,1526861943.119 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:19:03.583Z,1526861943.583 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:19:03.583Z,1526861943.583 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T00:19:03.918Z,1526861943.918 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:19:03.918Z,1526861943.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:19:03.918Z,1526861943.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:21:35.502Z,1526862095.502 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T00:21:35.502Z,1526862095.502 [BPC1] Communications Fault, FailCount= 4
2018-05-21T00:21:35.502Z,1526862095.502 [BPC1](ERROR): Communications Fault
2018-05-21T00:21:35.564Z,1526862095.564 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T00:21:36.726Z,1526862096.726 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T00:21:36.726Z,1526862096.726 [BPC1] No Fault, FailCount= 4
2018-05-21T00:22:04.319Z,1526862124.319 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:22:04.319Z,1526862124.319 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T00:22:04.319Z,1526862124.319 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:22:04.333Z,1526862124.333 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:22:04.737Z,1526862124.737 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:22:04.737Z,1526862124.737 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T00:22:05.121Z,1526862125.121 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:22:05.133Z,1526862125.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:22:05.134Z,1526862125.134 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:23:21.890Z,1526862201.890 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T00:23:21.890Z,1526862201.890 [Default:CheckIn:C.Wait] Stopped
2018-05-21T00:23:21.890Z,1526862201.890 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T00:23:21.890Z,1526862201.890 [Default:CheckIn:D] Running Loop=1
2018-05-21T00:23:22.293Z,1526862202.293 [Default:CheckIn:D] Stopped
2018-05-21T00:23:22.293Z,1526862202.293 [Default:CheckIn:E] Running Loop=1
2018-05-21T00:23:22.692Z,1526862202.692 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.820874 min 
2018-05-21T00:23:22.692Z,1526862202.692 [Default:CheckIn:E] Stopped
2018-05-21T00:23:22.692Z,1526862202.692 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T00:23:22.692Z,1526862202.692 [Default:CheckIn] Stopped
2018-05-21T00:23:22.692Z,1526862202.692 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T00:23:22.693Z,1526862202.693 [Default:CheckIn](INFO): Running loop #5
2018-05-21T00:23:22.693Z,1526862202.693 [Default:CheckIn] Running Loop=5
2018-05-21T00:23:22.693Z,1526862202.693 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T00:23:22.693Z,1526862202.693 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T00:23:25.975Z,1526862205.975 [NAL9602](INFO): Powering up
2018-05-21T00:23:37.128Z,1526862217.128 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:24:20.389Z,1526862260.389 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T00:25:05.200Z,1526862305.200 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:25:05.200Z,1526862305.200 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T00:25:05.201Z,1526862305.201 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:25:05.213Z,1526862305.213 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:25:05.561Z,1526862305.561 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:25:05.561Z,1526862305.561 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T00:25:05.964Z,1526862305.964 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:25:05.964Z,1526862305.964 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:25:05.964Z,1526862305.964 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:28:06.023Z,1526862486.023 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:28:06.023Z,1526862486.023 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T00:28:06.023Z,1526862486.023 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:28:06.035Z,1526862486.035 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:28:06.442Z,1526862486.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:28:06.442Z,1526862486.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T00:28:06.835Z,1526862486.835 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:28:06.836Z,1526862486.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:28:06.836Z,1526862486.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:28:22.833Z,1526862502.833 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T00:23:22.7Z
2018-05-21T00:28:22.833Z,1526862502.833 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T00:28:22.833Z,1526862502.833 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T00:28:26.789Z,1526862506.789 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180520T234132/Courier0012.lzma
2018-05-21T00:28:27.579Z,1526862507.579 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0012.lzma.bak
2018-05-21T00:28:27.580Z,1526862507.580 [DataOverHttps](INFO): SBD MOMSN=8287694
2018-05-21T00:28:36.712Z,1526862516.712 [DataOverHttps](INFO): Sending 199 bytes from file Logs/20180520T234132/Express0013.lzma
2018-05-21T00:28:37.788Z,1526862517.788 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0013.lzma.bak
2018-05-21T00:28:37.788Z,1526862517.788 [DataOverHttps](INFO): SBD MOMSN=8287696
2018-05-21T00:28:38.189Z,1526862518.189 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T00:28:38.189Z,1526862518.189 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T00:28:38.189Z,1526862518.189 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T00:28:41.408Z,1526862521.408 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T00:29:11.907Z,1526862551.907 [NAL9602](INFO): Powering down
2018-05-21T00:31:07.201Z,1526862667.201 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:31:07.201Z,1526862667.201 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T00:31:07.201Z,1526862667.201 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:31:07.214Z,1526862667.214 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:31:07.622Z,1526862667.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:31:07.622Z,1526862667.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T00:31:08.007Z,1526862668.007 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:31:08.007Z,1526862668.007 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:31:08.007Z,1526862668.007 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:33:38.758Z,1526862818.758 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T00:33:38.758Z,1526862818.758 [Default:CheckIn:C.Wait] Stopped
2018-05-21T00:33:38.758Z,1526862818.758 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T00:33:38.759Z,1526862818.759 [Default:CheckIn:D] Running Loop=1
2018-05-21T00:33:39.164Z,1526862819.164 [Default:CheckIn:D] Stopped
2018-05-21T00:33:39.164Z,1526862819.164 [Default:CheckIn:E] Running Loop=1
2018-05-21T00:33:39.558Z,1526862819.558 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 52.102051 min 
2018-05-21T00:33:39.558Z,1526862819.558 [Default:CheckIn:E] Stopped
2018-05-21T00:33:39.558Z,1526862819.558 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T00:33:39.559Z,1526862819.559 [Default:CheckIn] Stopped
2018-05-21T00:33:39.559Z,1526862819.559 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T00:33:39.559Z,1526862819.559 [Default:CheckIn](INFO): Running loop #6
2018-05-21T00:33:39.559Z,1526862819.559 [Default:CheckIn] Running Loop=6
2018-05-21T00:33:39.559Z,1526862819.559 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T00:33:39.559Z,1526862819.559 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T00:33:42.751Z,1526862822.751 [NAL9602](INFO): Powering up
2018-05-21T00:33:53.919Z,1526862833.919 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:33:54.708Z,1526862834.708 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T00:33:54.708Z,1526862834.708 [NAL9602] Data Fault, FailCount= 2
2018-05-21T00:33:54.709Z,1526862834.709 [NAL9602](ERROR): Data Fault
2018-05-21T00:33:54.781Z,1526862834.781 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:33:55.111Z,1526862835.111 [NAL9602](INFO): Powering down
2018-05-21T00:33:55.965Z,1526862835.965 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:33:55.965Z,1526862835.965 [NAL9602] No Fault, FailCount= 2
2018-05-21T00:34:08.351Z,1526862848.351 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:34:08.351Z,1526862848.351 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T00:34:08.351Z,1526862848.351 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:34:08.364Z,1526862848.364 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:34:08.764Z,1526862848.764 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:34:08.764Z,1526862848.764 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T00:34:09.169Z,1526862849.169 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:34:09.170Z,1526862849.170 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:34:09.170Z,1526862849.170 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:34:20.776Z,1526862860.776 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T00:34:25.511Z,1526862865.511 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:34:36.712Z,1526862876.712 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:37:09.260Z,1526863029.260 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:37:09.260Z,1526863029.260 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T00:37:09.260Z,1526863029.260 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:37:09.307Z,1526863029.307 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:37:09.683Z,1526863029.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:37:09.683Z,1526863029.683 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T00:37:10.049Z,1526863030.049 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:37:10.049Z,1526863030.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:37:10.050Z,1526863030.050 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:37:43.237Z,1526863063.237 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T00:37:43.237Z,1526863063.237 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T00:38:26.806Z,1526863106.806 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T00:38:26.806Z,1526863106.806 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T00:38:39.644Z,1526863119.644 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T00:33:39.6Z
2018-05-21T00:38:39.644Z,1526863119.644 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T00:38:39.644Z,1526863119.644 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T00:38:43.444Z,1526863123.444 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0015.lzma
2018-05-21T00:38:44.235Z,1526863124.235 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0015.lzma.bak
2018-05-21T00:38:44.236Z,1526863124.236 [DataOverHttps](INFO): SBD MOMSN=8287700
2018-05-21T00:38:53.052Z,1526863133.052 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20180520T234132/Express0016.lzma
2018-05-21T00:38:53.852Z,1526863133.852 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0016.lzma.bak
2018-05-21T00:38:53.852Z,1526863133.852 [DataOverHttps](INFO): SBD MOMSN=8287702
2018-05-21T00:38:54.535Z,1526863134.535 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T00:38:54.535Z,1526863134.535 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T00:38:54.535Z,1526863134.535 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T00:39:43.116Z,1526863183.116 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T00:40:10.367Z,1526863210.367 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:40:10.367Z,1526863210.367 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T00:40:10.367Z,1526863210.367 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:40:10.380Z,1526863210.380 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:40:10.801Z,1526863210.801 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:40:10.801Z,1526863210.801 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T00:40:11.174Z,1526863211.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:40:11.175Z,1526863211.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:40:11.175Z,1526863211.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:40:13.523Z,1526863213.523 [NAL9602](INFO): Powering down
2018-05-21T00:43:11.519Z,1526863391.519 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:43:11.519Z,1526863391.519 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T00:43:11.519Z,1526863391.519 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:43:11.544Z,1526863391.544 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:43:11.967Z,1526863391.967 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:43:11.967Z,1526863391.967 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T00:43:12.312Z,1526863392.312 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:43:12.312Z,1526863392.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:43:12.313Z,1526863392.313 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:43:54.714Z,1526863434.714 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T00:43:54.714Z,1526863434.714 [Default:CheckIn:C.Wait] Stopped
2018-05-21T00:43:54.714Z,1526863434.714 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T00:43:54.715Z,1526863434.715 [Default:CheckIn:D] Running Loop=1
2018-05-21T00:43:55.126Z,1526863435.126 [Default:CheckIn:D] Stopped
2018-05-21T00:43:55.126Z,1526863435.126 [Default:CheckIn:E] Running Loop=1
2018-05-21T00:43:55.525Z,1526863435.525 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.368079 min 
2018-05-21T00:43:55.525Z,1526863435.525 [Default:CheckIn:E] Stopped
2018-05-21T00:43:55.525Z,1526863435.525 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T00:43:55.526Z,1526863435.526 [Default:CheckIn] Stopped
2018-05-21T00:43:55.526Z,1526863435.526 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T00:43:55.526Z,1526863435.526 [Default:CheckIn](INFO): Running loop #7
2018-05-21T00:43:55.526Z,1526863435.526 [Default:CheckIn] Running Loop=7
2018-05-21T00:43:55.526Z,1526863435.526 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T00:43:55.526Z,1526863435.526 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T00:43:58.699Z,1526863438.699 [NAL9602](INFO): Powering up
2018-05-21T00:44:09.848Z,1526863449.848 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:44:21.106Z,1526863461.106 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T00:44:41.848Z,1526863481.848 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T00:44:41.930Z,1526863481.930 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T00:44:41.930Z,1526863481.930 [NAL9602] Data Fault, FailCount= 3
2018-05-21T00:44:41.930Z,1526863481.930 [NAL9602](ERROR): Data Fault
2018-05-21T00:44:41.996Z,1526863481.996 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:44:42.247Z,1526863482.247 [NAL9602](INFO): Powering down
2018-05-21T00:44:43.114Z,1526863483.114 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:44:43.118Z,1526863483.118 [NAL9602] No Fault, FailCount= 3
2018-05-21T00:45:12.634Z,1526863512.634 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:45:23.432Z,1526863523.432 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:45:24.232Z,1526863524.232 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T00:45:24.232Z,1526863524.232 [NAL9602] Data Fault, FailCount= 4
2018-05-21T00:45:24.232Z,1526863524.232 [NAL9602](ERROR): Data Fault
2018-05-21T00:45:24.301Z,1526863524.301 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:45:24.632Z,1526863524.632 [NAL9602](INFO): Powering down
2018-05-21T00:45:25.495Z,1526863525.495 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:45:25.495Z,1526863525.495 [NAL9602] No Fault, FailCount= 4
2018-05-21T00:45:55.032Z,1526863555.032 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:46:05.896Z,1526863565.896 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:46:12.354Z,1526863572.354 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:46:12.354Z,1526863572.354 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T00:46:12.354Z,1526863572.354 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:46:12.366Z,1526863572.366 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:46:12.758Z,1526863572.758 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:46:12.758Z,1526863572.758 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T00:46:13.159Z,1526863573.159 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:46:13.159Z,1526863573.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:46:13.159Z,1526863573.159 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:46:59.604Z,1526863619.604 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T00:46:59.604Z,1526863619.604 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T00:48:55.755Z,1526863735.755 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T00:43:55.5Z
2018-05-21T00:48:55.755Z,1526863735.755 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T00:48:55.756Z,1526863735.756 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T00:48:59.857Z,1526863739.857 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0018.lzma
2018-05-21T00:49:00.636Z,1526863740.636 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0018.lzma.bak
2018-05-21T00:49:00.636Z,1526863740.636 [DataOverHttps](INFO): SBD MOMSN=8287707
2018-05-21T00:49:09.651Z,1526863749.651 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0019.lzma
2018-05-21T00:49:10.452Z,1526863750.452 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0019.lzma.bak
2018-05-21T00:49:10.452Z,1526863750.452 [DataOverHttps](INFO): SBD MOMSN=8287709
2018-05-21T00:49:11.134Z,1526863751.134 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T00:49:11.135Z,1526863751.135 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T00:49:11.135Z,1526863751.135 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T00:49:14.484Z,1526863754.484 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T00:49:14.538Z,1526863754.538 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:49:14.538Z,1526863754.538 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T00:49:14.538Z,1526863754.538 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:49:14.551Z,1526863754.551 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:49:14.696Z,1526863754.696 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T00:49:14.696Z,1526863754.696 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T00:49:15.033Z,1526863755.033 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T00:49:15.033Z,1526863755.033 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T00:49:15.034Z,1526863755.034 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T00:49:44.963Z,1526863784.963 [NAL9602](INFO): Powering down
2018-05-21T00:52:15.818Z,1526863935.818 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T00:52:15.818Z,1526863935.818 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T00:52:15.818Z,1526863935.818 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T00:52:15.834Z,1526863935.834 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:52:15.835Z,1526863935.835 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T00:54:11.661Z,1526864051.661 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T00:54:11.661Z,1526864051.661 [Default:CheckIn:C.Wait] Stopped
2018-05-21T00:54:11.661Z,1526864051.661 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T00:54:11.661Z,1526864051.661 [Default:CheckIn:D] Running Loop=1
2018-05-21T00:54:12.052Z,1526864052.052 [Default:CheckIn:D] Stopped
2018-05-21T00:54:12.052Z,1526864052.052 [Default:CheckIn:E] Running Loop=1
2018-05-21T00:54:12.463Z,1526864052.463 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.650187 min 
2018-05-21T00:54:12.463Z,1526864052.463 [Default:CheckIn:E] Stopped
2018-05-21T00:54:12.463Z,1526864052.463 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T00:54:12.463Z,1526864052.463 [Default:CheckIn] Stopped
2018-05-21T00:54:12.463Z,1526864052.463 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T00:54:12.463Z,1526864052.463 [Default:CheckIn](INFO): Running loop #8
2018-05-21T00:54:12.464Z,1526864052.464 [Default:CheckIn] Running Loop=8
2018-05-21T00:54:12.464Z,1526864052.464 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T00:54:12.464Z,1526864052.464 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T00:54:15.913Z,1526864055.913 [NAL9602](INFO): Powering up
2018-05-21T00:54:21.259Z,1526864061.259 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T00:54:26.788Z,1526864066.788 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:54:58.788Z,1526864098.788 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T00:54:58.870Z,1526864098.870 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T00:54:58.870Z,1526864098.870 [NAL9602] Data Fault, FailCount= 5
2018-05-21T00:54:58.871Z,1526864098.871 [NAL9602](ERROR): Data Fault
2018-05-21T00:54:58.957Z,1526864098.957 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:54:58.957Z,1526864098.957 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T00:54:59.187Z,1526864099.187 [NAL9602](INFO): Powering down
2018-05-21T00:54:59.276Z,1526864099.276 [CBIT](INFO): Critical error at 20180521T005458
2018-05-21T00:56:59.047Z,1526864219.047 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:56:59.047Z,1526864219.047 [NAL9602] No Fault, FailCount= 5
2018-05-21T00:56:59.380Z,1526864219.380 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:57:10.580Z,1526864230.580 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:57:11.380Z,1526864231.380 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T00:57:11.380Z,1526864231.380 [NAL9602] Data Fault, FailCount= 1
2018-05-21T00:57:11.380Z,1526864231.380 [NAL9602](ERROR): Data Fault
2018-05-21T00:57:11.520Z,1526864231.520 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T00:57:11.779Z,1526864231.779 [NAL9602](INFO): Powering down
2018-05-21T00:57:12.635Z,1526864232.635 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T00:57:12.635Z,1526864232.635 [NAL9602] No Fault, FailCount= 1
2018-05-21T00:57:41.944Z,1526864261.944 [NAL9602](INFO): Powering up NAL9602
2018-05-21T00:57:53.144Z,1526864273.144 [NAL9602](INFO): NAL9602 initialized
2018-05-21T00:59:12.803Z,1526864352.803 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T00:54:12.5Z
2018-05-21T00:59:12.803Z,1526864352.803 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T00:59:12.803Z,1526864352.803 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T00:59:16.754Z,1526864356.754 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0021.lzma
2018-05-21T00:59:17.535Z,1526864357.535 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0021.lzma.bak
2018-05-21T00:59:17.536Z,1526864357.536 [DataOverHttps](INFO): SBD MOMSN=8287715
2018-05-21T00:59:26.406Z,1526864366.406 [DataOverHttps](INFO): Sending 332 bytes from file Logs/20180520T234132/Express0022.lzma
2018-05-21T00:59:27.207Z,1526864367.207 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0022.lzma.bak
2018-05-21T00:59:27.208Z,1526864367.208 [DataOverHttps](INFO): SBD MOMSN=8287718
2018-05-21T00:59:27.948Z,1526864367.948 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T00:59:27.948Z,1526864367.948 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T00:59:27.948Z,1526864367.948 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T00:59:31.123Z,1526864371.123 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T01:00:01.627Z,1526864401.627 [NAL9602](INFO): Powering down
2018-05-21T01:04:21.529Z,1526864661.529 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T01:04:28.300Z,1526864668.300 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T01:04:28.300Z,1526864668.300 [Default:CheckIn:C.Wait] Stopped
2018-05-21T01:04:28.300Z,1526864668.300 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T01:04:28.300Z,1526864668.300 [Default:CheckIn:D] Running Loop=1
2018-05-21T01:04:28.695Z,1526864668.695 [Default:CheckIn:D] Stopped
2018-05-21T01:04:28.695Z,1526864668.695 [Default:CheckIn:E] Running Loop=1
2018-05-21T01:04:29.100Z,1526864669.100 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.927563 min 
2018-05-21T01:04:29.100Z,1526864669.100 [Default:CheckIn:E] Stopped
2018-05-21T01:04:29.100Z,1526864669.100 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T01:04:29.101Z,1526864669.101 [Default:CheckIn] Stopped
2018-05-21T01:04:29.101Z,1526864669.101 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T01:04:29.101Z,1526864669.101 [Default:CheckIn](INFO): Running loop #9
2018-05-21T01:04:29.101Z,1526864669.101 [Default:CheckIn] Running Loop=9
2018-05-21T01:04:29.101Z,1526864669.101 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T01:04:29.101Z,1526864669.101 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T01:04:32.475Z,1526864672.475 [NAL9602](INFO): Powering up
2018-05-21T01:04:43.620Z,1526864683.620 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:05:15.620Z,1526864715.620 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T01:05:15.702Z,1526864715.702 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T01:05:15.702Z,1526864715.702 [NAL9602] Data Fault, FailCount= 2
2018-05-21T01:05:15.702Z,1526864715.702 [NAL9602](ERROR): Data Fault
2018-05-21T01:05:15.817Z,1526864715.817 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T01:05:16.020Z,1526864716.020 [NAL9602](INFO): Powering down
2018-05-21T01:05:16.951Z,1526864716.951 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T01:05:16.951Z,1526864716.951 [NAL9602] No Fault, FailCount= 2
2018-05-21T01:05:46.388Z,1526864746.388 [NAL9602](INFO): Powering up NAL9602
2018-05-21T01:05:57.592Z,1526864757.592 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:07:16.072Z,1526864836.072 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:07:16.072Z,1526864836.072 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T01:07:16.441Z,1526864836.441 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:07:16.441Z,1526864836.441 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:07:16.441Z,1526864836.441 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:09:29.122Z,1526864969.122 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T01:04:29.1Z
2018-05-21T01:09:29.122Z,1526864969.122 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T01:09:29.122Z,1526864969.122 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T01:09:33.071Z,1526864973.071 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0024.lzma
2018-05-21T01:09:33.847Z,1526864973.847 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0024.lzma.bak
2018-05-21T01:09:33.848Z,1526864973.848 [DataOverHttps](INFO): SBD MOMSN=8287725
2018-05-21T01:09:42.840Z,1526864982.840 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0025.lzma
2018-05-21T01:09:43.639Z,1526864983.639 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0025.lzma.bak
2018-05-21T01:09:43.640Z,1526864983.640 [DataOverHttps](INFO): SBD MOMSN=8287727
2018-05-21T01:09:44.330Z,1526864984.330 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T01:09:44.330Z,1526864984.330 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T01:09:44.330Z,1526864984.330 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T01:09:47.553Z,1526864987.553 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T01:10:16.492Z,1526865016.492 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:10:16.492Z,1526865016.492 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T01:10:16.492Z,1526865016.492 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:10:16.505Z,1526865016.505 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:10:16.902Z,1526865016.902 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:10:16.903Z,1526865016.903 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T01:10:17.290Z,1526865017.290 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:10:17.291Z,1526865017.291 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:10:17.291Z,1526865017.291 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:10:18.051Z,1526865018.051 [NAL9602](INFO): Powering down
2018-05-21T01:13:17.615Z,1526865197.615 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:13:17.615Z,1526865197.615 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T01:13:17.615Z,1526865197.615 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:13:17.628Z,1526865197.628 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:13:18.024Z,1526865198.024 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:13:18.024Z,1526865198.024 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T01:13:18.405Z,1526865198.405 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:13:18.406Z,1526865198.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:13:18.406Z,1526865198.406 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:14:21.613Z,1526865261.613 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T01:14:44.784Z,1526865284.784 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T01:14:44.784Z,1526865284.784 [Default:CheckIn:C.Wait] Stopped
2018-05-21T01:14:44.784Z,1526865284.784 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T01:14:44.784Z,1526865284.784 [Default:CheckIn:D] Running Loop=1
2018-05-21T01:14:45.201Z,1526865285.201 [Default:CheckIn:D] Stopped
2018-05-21T01:14:45.201Z,1526865285.201 [Default:CheckIn:E] Running Loop=1
2018-05-21T01:14:45.594Z,1526865285.594 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 93.202669 min 
2018-05-21T01:14:45.595Z,1526865285.595 [Default:CheckIn:E] Stopped
2018-05-21T01:14:45.595Z,1526865285.595 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T01:14:45.595Z,1526865285.595 [Default:CheckIn] Stopped
2018-05-21T01:14:45.595Z,1526865285.595 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T01:14:45.595Z,1526865285.595 [Default:CheckIn](INFO): Running loop #10
2018-05-21T01:14:45.595Z,1526865285.595 [Default:CheckIn] Running Loop=10
2018-05-21T01:14:45.595Z,1526865285.595 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T01:14:45.595Z,1526865285.595 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T01:14:49.110Z,1526865289.110 [NAL9602](INFO): Powering up
2018-05-21T01:14:59.980Z,1526865299.980 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:15:00.780Z,1526865300.780 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T01:15:00.780Z,1526865300.780 [NAL9602] Data Fault, FailCount= 3
2018-05-21T01:15:00.780Z,1526865300.780 [NAL9602](ERROR): Data Fault
2018-05-21T01:15:00.869Z,1526865300.869 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T01:15:01.179Z,1526865301.179 [NAL9602](INFO): Powering down
2018-05-21T01:15:02.044Z,1526865302.044 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T01:15:02.044Z,1526865302.044 [NAL9602] No Fault, FailCount= 3
2018-05-21T01:15:31.579Z,1526865331.579 [NAL9602](INFO): Powering up NAL9602
2018-05-21T01:15:42.780Z,1526865342.780 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:16:18.571Z,1526865378.571 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:16:18.571Z,1526865378.571 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T01:16:18.571Z,1526865378.571 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:16:18.584Z,1526865378.584 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:16:18.978Z,1526865378.978 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:16:18.978Z,1526865378.978 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T01:16:19.361Z,1526865379.361 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:16:19.361Z,1526865379.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:16:19.362Z,1526865379.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:19:19.477Z,1526865559.477 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:19:19.477Z,1526865559.477 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T01:19:19.477Z,1526865559.477 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:19:19.498Z,1526865559.498 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:19:19.894Z,1526865559.894 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:19:19.895Z,1526865559.895 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T01:19:20.271Z,1526865560.271 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:19:20.271Z,1526865560.271 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:19:20.271Z,1526865560.271 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:19:45.864Z,1526865585.864 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T01:14:45.6Z
2018-05-21T01:19:45.864Z,1526865585.864 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T01:19:45.864Z,1526865585.864 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T01:19:49.700Z,1526865589.700 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0027.lzma
2018-05-21T01:19:50.499Z,1526865590.499 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0027.lzma.bak
2018-05-21T01:19:50.500Z,1526865590.500 [DataOverHttps](INFO): SBD MOMSN=8287732
2018-05-21T01:19:59.324Z,1526865599.324 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20180520T234132/Express0028.lzma
2018-05-21T01:20:00.124Z,1526865600.124 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0028.lzma.bak
2018-05-21T01:20:00.124Z,1526865600.124 [DataOverHttps](INFO): SBD MOMSN=8287734
2018-05-21T01:20:00.818Z,1526865600.818 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T01:20:00.818Z,1526865600.818 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T01:20:00.818Z,1526865600.818 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T01:20:49.496Z,1526865649.496 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T01:21:20.291Z,1526865680.291 [NAL9602](INFO): Powering down
2018-05-21T01:22:20.420Z,1526865740.420 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:22:20.420Z,1526865740.420 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T01:22:20.420Z,1526865740.420 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:22:20.432Z,1526865740.432 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:22:20.838Z,1526865740.838 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:22:20.838Z,1526865740.838 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T01:22:21.222Z,1526865741.222 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:22:21.223Z,1526865741.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:22:21.223Z,1526865741.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:24:21.799Z,1526865861.799 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T01:25:01.353Z,1526865901.353 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T01:25:01.353Z,1526865901.353 [Default:CheckIn:C.Wait] Stopped
2018-05-21T01:25:01.353Z,1526865901.353 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T01:25:01.353Z,1526865901.353 [Default:CheckIn:D] Running Loop=1
2018-05-21T01:25:01.754Z,1526865901.754 [Default:CheckIn:D] Stopped
2018-05-21T01:25:01.754Z,1526865901.754 [Default:CheckIn:E] Running Loop=1
2018-05-21T01:25:02.161Z,1526865902.161 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.478548 min 
2018-05-21T01:25:02.161Z,1526865902.161 [Default:CheckIn:E] Stopped
2018-05-21T01:25:02.161Z,1526865902.161 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T01:25:02.161Z,1526865902.161 [Default:CheckIn] Stopped
2018-05-21T01:25:02.161Z,1526865902.161 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T01:25:02.162Z,1526865902.162 [Default:CheckIn](INFO): Running loop #11
2018-05-21T01:25:02.162Z,1526865902.162 [Default:CheckIn] Running Loop=11
2018-05-21T01:25:02.162Z,1526865902.162 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T01:25:02.162Z,1526865902.162 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T01:25:05.621Z,1526865905.621 [NAL9602](INFO): Powering up
2018-05-21T01:25:16.520Z,1526865916.520 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:25:21.363Z,1526865921.363 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:25:21.363Z,1526865921.363 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T01:25:21.363Z,1526865921.363 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:25:21.392Z,1526865921.392 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:25:21.789Z,1526865921.789 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:25:21.789Z,1526865921.789 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T01:25:22.165Z,1526865922.165 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:25:22.165Z,1526865922.165 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:25:22.166Z,1526865922.166 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:25:48.520Z,1526865948.520 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T01:25:48.602Z,1526865948.602 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T01:25:48.602Z,1526865948.602 [NAL9602] Data Fault, FailCount= 4
2018-05-21T01:25:48.602Z,1526865948.602 [NAL9602](ERROR): Data Fault
2018-05-21T01:25:48.675Z,1526865948.675 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T01:25:48.919Z,1526865948.919 [NAL9602](INFO): Powering down
2018-05-21T01:25:49.783Z,1526865949.783 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T01:25:49.784Z,1526865949.784 [NAL9602] No Fault, FailCount= 4
2018-05-21T01:26:18.991Z,1526865978.991 [NAL9602](INFO): Powering up NAL9602
2018-05-21T01:26:30.191Z,1526865990.191 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:26:30.991Z,1526865990.991 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T01:26:30.992Z,1526865990.992 [NAL9602] Data Fault, FailCount= 5
2018-05-21T01:26:30.992Z,1526865990.992 [NAL9602](ERROR): Data Fault
2018-05-21T01:26:31.072Z,1526865991.072 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T01:26:31.072Z,1526865991.072 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T01:26:31.391Z,1526865991.391 [NAL9602](INFO): Powering down
2018-05-21T01:26:31.472Z,1526865991.472 [CBIT](INFO): Critical error at 20180521T012631
2018-05-21T01:28:22.223Z,1526866102.223 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:28:22.223Z,1526866102.223 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T01:28:22.223Z,1526866102.223 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:28:22.236Z,1526866102.236 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:28:22.630Z,1526866102.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:28:22.630Z,1526866102.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T01:28:23.020Z,1526866103.020 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:28:23.021Z,1526866103.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:28:23.021Z,1526866103.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:28:31.043Z,1526866111.043 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T01:28:31.043Z,1526866111.043 [NAL9602] No Fault, FailCount= 5
2018-05-21T01:28:31.375Z,1526866111.375 [NAL9602](INFO): Powering up NAL9602
2018-05-21T01:28:42.576Z,1526866122.576 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:30:02.221Z,1526866202.221 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T01:25:02.2Z
2018-05-21T01:30:02.221Z,1526866202.221 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T01:30:02.221Z,1526866202.221 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T01:30:06.577Z,1526866206.577 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0030.lzma
2018-05-21T01:30:07.375Z,1526866207.375 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0030.lzma.bak
2018-05-21T01:30:07.376Z,1526866207.376 [DataOverHttps](INFO): SBD MOMSN=8287739
2018-05-21T01:30:16.370Z,1526866216.370 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180520T234132/Express0031.lzma
2018-05-21T01:30:17.168Z,1526866217.168 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0031.lzma.bak
2018-05-21T01:30:17.168Z,1526866217.168 [DataOverHttps](INFO): SBD MOMSN=8287742
2018-05-21T01:30:17.860Z,1526866217.860 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T01:30:17.860Z,1526866217.860 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T01:30:17.860Z,1526866217.860 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T01:30:21.199Z,1526866221.199 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T01:30:51.695Z,1526866251.695 [NAL9602](INFO): Powering down
2018-05-21T01:31:23.112Z,1526866283.112 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:31:23.112Z,1526866283.112 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T01:31:23.112Z,1526866283.112 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:31:23.161Z,1526866283.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:31:23.516Z,1526866283.516 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:31:23.516Z,1526866283.516 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T01:31:23.910Z,1526866283.910 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:31:23.911Z,1526866283.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:31:23.911Z,1526866283.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:34:21.911Z,1526866461.911 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T01:34:23.971Z,1526866463.971 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:34:23.971Z,1526866463.971 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T01:34:23.971Z,1526866463.971 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:34:24.008Z,1526866464.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:34:24.375Z,1526866464.375 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:34:24.375Z,1526866464.375 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T01:34:24.777Z,1526866464.777 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:34:24.778Z,1526866464.778 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:34:24.778Z,1526866464.778 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:35:18.381Z,1526866518.381 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T01:35:18.381Z,1526866518.381 [Default:CheckIn:C.Wait] Stopped
2018-05-21T01:35:18.381Z,1526866518.381 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T01:35:18.381Z,1526866518.381 [Default:CheckIn:D] Running Loop=1
2018-05-21T01:35:18.799Z,1526866518.799 [Default:CheckIn:D] Stopped
2018-05-21T01:35:18.799Z,1526866518.799 [Default:CheckIn:E] Running Loop=1
2018-05-21T01:35:22.095Z,1526866522.095 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.762630 min 
2018-05-21T01:35:22.095Z,1526866522.095 [Default:CheckIn:E] Stopped
2018-05-21T01:35:22.095Z,1526866522.095 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T01:35:22.095Z,1526866522.095 [Default:CheckIn] Stopped
2018-05-21T01:35:22.095Z,1526866522.095 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T01:35:22.095Z,1526866522.095 [Default:CheckIn](INFO): Running loop #12
2018-05-21T01:35:22.096Z,1526866522.096 [Default:CheckIn] Running Loop=12
2018-05-21T01:35:22.096Z,1526866522.096 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T01:35:22.096Z,1526866522.096 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T01:35:22.519Z,1526866522.519 [NAL9602](INFO): Powering up
2018-05-21T01:35:33.720Z,1526866533.720 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:36:05.720Z,1526866565.720 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T01:36:05.798Z,1526866565.798 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T01:36:05.798Z,1526866565.798 [NAL9602] Data Fault, FailCount= 1
2018-05-21T01:36:05.798Z,1526866565.798 [NAL9602](ERROR): Data Fault
2018-05-21T01:36:05.859Z,1526866565.859 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T01:36:06.119Z,1526866566.119 [NAL9602](INFO): Powering down
2018-05-21T01:36:06.987Z,1526866566.987 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T01:36:06.987Z,1526866566.987 [NAL9602] No Fault, FailCount= 1
2018-05-21T01:36:36.487Z,1526866596.487 [NAL9602](INFO): Powering up NAL9602
2018-05-21T01:36:47.692Z,1526866607.692 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:37:24.953Z,1526866644.953 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:37:24.953Z,1526866644.953 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T01:37:24.953Z,1526866644.953 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:37:24.966Z,1526866644.966 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:37:25.385Z,1526866645.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:37:25.385Z,1526866645.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T01:37:25.755Z,1526866645.755 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:37:25.755Z,1526866645.755 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:37:25.756Z,1526866645.756 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:40:22.778Z,1526866822.778 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T01:35:22.1Z
2018-05-21T01:40:22.778Z,1526866822.778 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T01:40:22.778Z,1526866822.778 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T01:40:27.783Z,1526866827.783 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:40:27.783Z,1526866827.783 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T01:40:27.783Z,1526866827.783 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:40:27.816Z,1526866827.816 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:40:27.902Z,1526866827.902 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0033.lzma
2018-05-21T01:40:27.999Z,1526866827.999 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:40:27.999Z,1526866827.999 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T01:40:28.310Z,1526866828.310 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:40:28.311Z,1526866828.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:40:28.311Z,1526866828.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:40:28.655Z,1526866828.655 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0033.lzma.bak
2018-05-21T01:40:28.656Z,1526866828.656 [DataOverHttps](INFO): SBD MOMSN=8287748
2018-05-21T01:40:37.462Z,1526866837.462 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T01:40:37.546Z,1526866837.546 [DataOverHttps](INFO): Sending 240 bytes from file Logs/20180520T234132/Express0034.lzma
2018-05-21T01:40:38.348Z,1526866838.348 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0034.lzma.bak
2018-05-21T01:40:38.348Z,1526866838.348 [DataOverHttps](INFO): SBD MOMSN=8287750
2018-05-21T01:40:39.038Z,1526866839.038 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T01:40:39.038Z,1526866839.038 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T01:40:39.038Z,1526866839.038 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T01:41:07.931Z,1526866867.931 [NAL9602](INFO): Powering down
2018-05-21T01:43:28.516Z,1526867008.516 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:43:28.517Z,1526867008.517 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T01:43:28.517Z,1526867008.517 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:43:28.530Z,1526867008.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:43:28.926Z,1526867008.926 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:43:28.926Z,1526867008.926 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T01:43:29.315Z,1526867009.315 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:43:29.315Z,1526867009.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:43:29.315Z,1526867009.315 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:44:21.935Z,1526867061.935 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T01:45:39.455Z,1526867139.455 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T01:45:39.455Z,1526867139.455 [Default:CheckIn:C.Wait] Stopped
2018-05-21T01:45:39.455Z,1526867139.455 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T01:45:39.455Z,1526867139.455 [Default:CheckIn:D] Running Loop=1
2018-05-21T01:45:39.861Z,1526867139.861 [Default:CheckIn:D] Stopped
2018-05-21T01:45:39.861Z,1526867139.861 [Default:CheckIn:E] Running Loop=1
2018-05-21T01:45:40.263Z,1526867140.263 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 124.113664 min 
2018-05-21T01:45:40.264Z,1526867140.264 [Default:CheckIn:E] Stopped
2018-05-21T01:45:40.264Z,1526867140.264 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T01:45:40.264Z,1526867140.264 [Default:CheckIn] Stopped
2018-05-21T01:45:40.264Z,1526867140.264 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T01:45:40.264Z,1526867140.264 [Default:CheckIn](INFO): Running loop #13
2018-05-21T01:45:40.264Z,1526867140.264 [Default:CheckIn] Running Loop=13
2018-05-21T01:45:40.264Z,1526867140.264 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T01:45:40.265Z,1526867140.265 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T01:45:43.447Z,1526867143.447 [NAL9602](INFO): Powering up
2018-05-21T01:45:54.588Z,1526867154.588 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:45:55.384Z,1526867155.384 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T01:45:55.385Z,1526867155.385 [NAL9602] Data Fault, FailCount= 2
2018-05-21T01:45:55.385Z,1526867155.385 [NAL9602](ERROR): Data Fault
2018-05-21T01:45:55.470Z,1526867155.470 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T01:45:55.788Z,1526867155.788 [NAL9602](INFO): Powering down
2018-05-21T01:45:56.642Z,1526867156.642 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T01:45:56.642Z,1526867156.642 [NAL9602] No Fault, FailCount= 2
2018-05-21T01:46:26.184Z,1526867186.184 [NAL9602](INFO): Powering up NAL9602
2018-05-21T01:46:29.424Z,1526867189.424 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:46:29.424Z,1526867189.424 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T01:46:29.424Z,1526867189.424 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:46:29.436Z,1526867189.436 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:46:29.867Z,1526867189.867 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:46:29.867Z,1526867189.867 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T01:46:30.219Z,1526867190.219 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:46:30.220Z,1526867190.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:46:30.220Z,1526867190.220 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:46:37.383Z,1526867197.383 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:49:30.339Z,1526867370.339 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:49:30.339Z,1526867370.339 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T01:49:30.339Z,1526867370.339 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:49:30.371Z,1526867370.371 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:49:30.749Z,1526867370.749 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:49:30.749Z,1526867370.749 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T01:49:31.140Z,1526867371.140 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:49:31.141Z,1526867371.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:49:31.141Z,1526867371.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:50:40.352Z,1526867440.352 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T01:45:40.3Z
2018-05-21T01:50:40.352Z,1526867440.352 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T01:50:40.352Z,1526867440.352 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T01:50:44.228Z,1526867444.228 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0036.lzma
2018-05-21T01:50:45.027Z,1526867445.027 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0036.lzma.bak
2018-05-21T01:50:45.028Z,1526867445.028 [DataOverHttps](INFO): SBD MOMSN=8287755
2018-05-21T01:50:54.381Z,1526867454.381 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0037.lzma
2018-05-21T01:50:55.180Z,1526867455.180 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0037.lzma.bak
2018-05-21T01:50:55.180Z,1526867455.180 [DataOverHttps](INFO): SBD MOMSN=8287757
2018-05-21T01:50:55.879Z,1526867455.879 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T01:50:55.879Z,1526867455.879 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T01:50:55.880Z,1526867455.880 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T01:51:44.103Z,1526867504.103 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T01:52:14.687Z,1526867534.687 [NAL9602](INFO): Powering down
2018-05-21T01:52:31.536Z,1526867551.536 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:52:31.536Z,1526867551.536 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T01:52:31.536Z,1526867551.536 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:52:31.549Z,1526867551.549 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:52:31.946Z,1526867551.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:52:31.946Z,1526867551.946 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T01:52:32.332Z,1526867552.332 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:52:32.332Z,1526867552.332 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:52:32.332Z,1526867552.332 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:54:21.951Z,1526867661.951 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T01:55:32.441Z,1526867732.441 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:55:32.441Z,1526867732.441 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T01:55:32.441Z,1526867732.441 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:55:32.485Z,1526867732.485 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:55:32.894Z,1526867732.894 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:55:32.894Z,1526867732.894 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T01:55:33.248Z,1526867733.248 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:55:33.249Z,1526867733.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:55:33.249Z,1526867733.249 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T01:55:56.058Z,1526867756.058 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T01:55:56.059Z,1526867756.059 [Default:CheckIn:C.Wait] Stopped
2018-05-21T01:55:56.059Z,1526867756.059 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T01:55:56.059Z,1526867756.059 [Default:CheckIn:D] Running Loop=1
2018-05-21T01:55:56.460Z,1526867756.460 [Default:CheckIn:D] Stopped
2018-05-21T01:55:56.460Z,1526867756.460 [Default:CheckIn:E] Running Loop=1
2018-05-21T01:55:56.854Z,1526867756.854 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.390316 min 
2018-05-21T01:55:56.855Z,1526867756.855 [Default:CheckIn:E] Stopped
2018-05-21T01:55:56.855Z,1526867756.855 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T01:55:56.855Z,1526867756.855 [Default:CheckIn] Stopped
2018-05-21T01:55:56.855Z,1526867756.855 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T01:55:56.855Z,1526867756.855 [Default:CheckIn](INFO): Running loop #14
2018-05-21T01:55:56.855Z,1526867756.855 [Default:CheckIn] Running Loop=14
2018-05-21T01:55:56.855Z,1526867756.855 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T01:55:56.855Z,1526867756.855 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T01:56:00.318Z,1526867760.318 [NAL9602](INFO): Powering up
2018-05-21T01:56:11.188Z,1526867771.188 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:56:43.188Z,1526867803.188 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T01:56:43.266Z,1526867803.266 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T01:56:43.266Z,1526867803.266 [NAL9602] Data Fault, FailCount= 3
2018-05-21T01:56:43.266Z,1526867803.266 [NAL9602](ERROR): Data Fault
2018-05-21T01:56:43.351Z,1526867803.351 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T01:56:43.587Z,1526867803.587 [NAL9602](INFO): Powering down
2018-05-21T01:56:44.452Z,1526867804.452 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T01:56:44.452Z,1526867804.452 [NAL9602] No Fault, FailCount= 3
2018-05-21T01:57:13.987Z,1526867833.987 [NAL9602](INFO): Powering up NAL9602
2018-05-21T01:57:25.188Z,1526867845.188 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:57:25.988Z,1526867845.988 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T01:57:25.988Z,1526867845.988 [NAL9602] Data Fault, FailCount= 4
2018-05-21T01:57:25.988Z,1526867845.988 [NAL9602](ERROR): Data Fault
2018-05-21T01:57:26.088Z,1526867846.088 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T01:57:26.387Z,1526867846.387 [NAL9602](INFO): Powering down
2018-05-21T01:57:27.267Z,1526867847.267 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T01:57:27.267Z,1526867847.267 [NAL9602] No Fault, FailCount= 4
2018-05-21T01:57:56.787Z,1526867876.787 [NAL9602](INFO): Powering up NAL9602
2018-05-21T01:58:07.660Z,1526867887.660 [NAL9602](INFO): NAL9602 initialized
2018-05-21T01:58:33.312Z,1526867913.312 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T01:58:33.312Z,1526867913.312 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T01:58:33.312Z,1526867913.312 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T01:58:33.349Z,1526867913.349 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T01:58:33.739Z,1526867913.739 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T01:58:33.739Z,1526867913.739 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T01:58:34.106Z,1526867914.106 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T01:58:34.107Z,1526867914.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T01:58:34.107Z,1526867914.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:00:57.117Z,1526868057.117 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T01:55:56.9Z
2018-05-21T02:00:57.117Z,1526868057.117 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T02:00:57.117Z,1526868057.117 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T02:01:01.448Z,1526868061.448 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0039.lzma
2018-05-21T02:01:02.248Z,1526868062.248 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0039.lzma.bak
2018-05-21T02:01:02.248Z,1526868062.248 [DataOverHttps](INFO): SBD MOMSN=8287762
2018-05-21T02:01:11.259Z,1526868071.259 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0040.lzma
2018-05-21T02:01:12.059Z,1526868072.059 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0040.lzma.bak
2018-05-21T02:01:12.060Z,1526868072.060 [DataOverHttps](INFO): SBD MOMSN=8287764
2018-05-21T02:01:12.779Z,1526868072.779 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T02:01:12.779Z,1526868072.779 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T02:01:12.779Z,1526868072.779 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T02:01:16.044Z,1526868076.044 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T02:01:34.211Z,1526868094.211 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:01:34.212Z,1526868094.212 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T02:01:34.212Z,1526868094.212 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:01:34.237Z,1526868094.237 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:01:34.623Z,1526868094.623 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:01:34.624Z,1526868094.624 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T02:01:35.006Z,1526868095.006 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:01:35.006Z,1526868095.006 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:01:35.007Z,1526868095.007 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:01:46.563Z,1526868106.563 [NAL9602](INFO): Powering down
2018-05-21T02:04:22.228Z,1526868262.228 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T02:04:35.382Z,1526868275.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:04:35.382Z,1526868275.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T02:04:35.382Z,1526868275.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:04:35.394Z,1526868275.394 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:04:35.794Z,1526868275.794 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:04:35.794Z,1526868275.794 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T02:04:36.199Z,1526868276.199 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:04:36.200Z,1526868276.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:04:36.200Z,1526868276.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:06:13.269Z,1526868373.269 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T02:06:13.269Z,1526868373.269 [Default:CheckIn:C.Wait] Stopped
2018-05-21T02:06:13.269Z,1526868373.269 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T02:06:13.269Z,1526868373.269 [Default:CheckIn:D] Running Loop=1
2018-05-21T02:06:13.669Z,1526868373.669 [Default:CheckIn:D] Stopped
2018-05-21T02:06:13.669Z,1526868373.669 [Default:CheckIn:E] Running Loop=1
2018-05-21T02:06:14.069Z,1526868374.069 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.677132 min 
2018-05-21T02:06:14.069Z,1526868374.069 [Default:CheckIn:E] Stopped
2018-05-21T02:06:14.069Z,1526868374.069 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T02:06:14.069Z,1526868374.069 [Default:CheckIn] Stopped
2018-05-21T02:06:14.069Z,1526868374.069 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T02:06:14.070Z,1526868374.070 [Default:CheckIn](INFO): Running loop #15
2018-05-21T02:06:14.070Z,1526868374.070 [Default:CheckIn] Running Loop=15
2018-05-21T02:06:14.070Z,1526868374.070 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T02:06:14.070Z,1526868374.070 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T02:06:17.566Z,1526868377.566 [NAL9602](INFO): Powering up
2018-05-21T02:06:28.440Z,1526868388.440 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:07:00.440Z,1526868420.440 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T02:07:00.518Z,1526868420.518 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T02:07:00.518Z,1526868420.518 [NAL9602] Data Fault, FailCount= 5
2018-05-21T02:07:00.518Z,1526868420.518 [NAL9602](ERROR): Data Fault
2018-05-21T02:07:00.584Z,1526868420.584 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T02:07:00.584Z,1526868420.584 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T02:07:00.839Z,1526868420.839 [NAL9602](INFO): Powering down
2018-05-21T02:07:00.910Z,1526868420.910 [CBIT](INFO): Critical error at 20180521T020700
2018-05-21T02:07:36.476Z,1526868456.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:07:36.476Z,1526868456.476 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T02:07:36.476Z,1526868456.476 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:07:36.533Z,1526868456.533 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:07:36.533Z,1526868456.533 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:09:00.869Z,1526868540.869 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T02:09:00.870Z,1526868540.870 [NAL9602] No Fault, FailCount= 5
2018-05-21T02:09:01.211Z,1526868541.211 [NAL9602](INFO): Powering up NAL9602
2018-05-21T02:09:12.412Z,1526868552.412 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:09:13.212Z,1526868553.212 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T02:09:13.212Z,1526868553.212 [NAL9602] Data Fault, FailCount= 1
2018-05-21T02:09:13.212Z,1526868553.212 [NAL9602](ERROR): Data Fault
2018-05-21T02:09:13.292Z,1526868553.292 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T02:09:13.611Z,1526868553.611 [NAL9602](INFO): Powering down
2018-05-21T02:09:14.464Z,1526868554.464 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T02:09:14.464Z,1526868554.464 [NAL9602] No Fault, FailCount= 1
2018-05-21T02:09:43.634Z,1526868583.634 [NAL9602](INFO): Powering up NAL9602
2018-05-21T02:09:54.835Z,1526868594.835 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:11:14.460Z,1526868674.460 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T02:06:14.1Z
2018-05-21T02:11:14.460Z,1526868674.460 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T02:11:14.460Z,1526868674.460 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T02:11:18.956Z,1526868678.956 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0042.lzma
2018-05-21T02:11:19.748Z,1526868679.748 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0042.lzma.bak
2018-05-21T02:11:19.748Z,1526868679.748 [DataOverHttps](INFO): SBD MOMSN=8287770
2018-05-21T02:11:29.063Z,1526868689.063 [DataOverHttps](INFO): Sending 313 bytes from file Logs/20180520T234132/Express0043.lzma
2018-05-21T02:11:29.864Z,1526868689.864 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0043.lzma.bak
2018-05-21T02:11:29.864Z,1526868689.864 [DataOverHttps](INFO): SBD MOMSN=8287773
2018-05-21T02:11:30.549Z,1526868690.549 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T02:11:30.549Z,1526868690.549 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T02:11:30.549Z,1526868690.549 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T02:11:33.785Z,1526868693.785 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T02:12:04.271Z,1526868724.271 [NAL9602](INFO): Powering down
2018-05-21T02:14:22.534Z,1526868862.534 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T02:16:30.972Z,1526868990.972 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T02:16:30.972Z,1526868990.972 [Default:CheckIn:C.Wait] Stopped
2018-05-21T02:16:30.972Z,1526868990.972 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T02:16:30.972Z,1526868990.972 [Default:CheckIn:D] Running Loop=1
2018-05-21T02:16:31.385Z,1526868991.385 [Default:CheckIn:D] Stopped
2018-05-21T02:16:31.385Z,1526868991.385 [Default:CheckIn:E] Running Loop=1
2018-05-21T02:16:34.479Z,1526868994.479 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.972396 min 
2018-05-21T02:16:34.480Z,1526868994.480 [Default:CheckIn:E] Stopped
2018-05-21T02:16:34.480Z,1526868994.480 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T02:16:34.480Z,1526868994.480 [Default:CheckIn] Stopped
2018-05-21T02:16:34.480Z,1526868994.480 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T02:16:34.480Z,1526868994.480 [Default:CheckIn](INFO): Running loop #16
2018-05-21T02:16:34.480Z,1526868994.480 [Default:CheckIn] Running Loop=16
2018-05-21T02:16:34.480Z,1526868994.480 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T02:16:34.480Z,1526868994.480 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T02:16:34.903Z,1526868994.903 [NAL9602](INFO): Powering up
2018-05-21T02:16:46.104Z,1526869006.104 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:17:18.104Z,1526869038.104 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T02:17:18.178Z,1526869038.178 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T02:17:18.178Z,1526869038.178 [NAL9602] Data Fault, FailCount= 2
2018-05-21T02:17:18.178Z,1526869038.178 [NAL9602](ERROR): Data Fault
2018-05-21T02:17:18.254Z,1526869038.254 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T02:17:18.503Z,1526869038.503 [NAL9602](INFO): Powering down
2018-05-21T02:17:19.365Z,1526869039.365 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T02:17:19.365Z,1526869039.365 [NAL9602] No Fault, FailCount= 2
2018-05-21T02:17:48.587Z,1526869068.587 [NAL9602](INFO): Powering up NAL9602
2018-05-21T02:17:59.787Z,1526869079.787 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:21:35.620Z,1526869295.620 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T02:16:34.5Z
2018-05-21T02:21:35.620Z,1526869295.620 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T02:21:35.621Z,1526869295.621 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T02:21:40.428Z,1526869300.428 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0045.lzma
2018-05-21T02:21:41.229Z,1526869301.229 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0045.lzma.bak
2018-05-21T02:21:41.229Z,1526869301.229 [DataOverHttps](INFO): SBD MOMSN=8287780
2018-05-21T02:21:49.985Z,1526869309.985 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T02:21:50.075Z,1526869310.075 [DataOverHttps](INFO): Sending 239 bytes from file Logs/20180520T234132/Express0046.lzma
2018-05-21T02:21:50.876Z,1526869310.876 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0046.lzma.bak
2018-05-21T02:21:50.876Z,1526869310.876 [DataOverHttps](INFO): SBD MOMSN=8287782
2018-05-21T02:21:51.556Z,1526869311.556 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T02:21:51.556Z,1526869311.556 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T02:21:51.557Z,1526869311.557 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T02:22:20.131Z,1526869340.131 [NAL9602](INFO): Powering down
2018-05-21T02:22:36.587Z,1526869356.587 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:22:36.587Z,1526869356.587 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T02:22:36.976Z,1526869356.976 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:22:36.977Z,1526869356.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:22:36.977Z,1526869356.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:24:22.801Z,1526869462.801 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T02:25:37.076Z,1526869537.076 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:25:37.076Z,1526869537.076 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T02:25:37.076Z,1526869537.076 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:25:37.088Z,1526869537.088 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:25:37.478Z,1526869537.478 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:25:37.478Z,1526869537.478 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T02:25:37.874Z,1526869537.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:25:37.875Z,1526869537.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:25:37.875Z,1526869537.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:26:51.861Z,1526869611.861 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T02:26:51.861Z,1526869611.861 [Default:CheckIn:C.Wait] Stopped
2018-05-21T02:26:51.861Z,1526869611.861 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T02:26:51.862Z,1526869611.862 [Default:CheckIn:D] Running Loop=1
2018-05-21T02:26:52.258Z,1526869612.258 [Default:CheckIn:D] Stopped
2018-05-21T02:26:52.258Z,1526869612.258 [Default:CheckIn:E] Running Loop=1
2018-05-21T02:26:52.665Z,1526869612.665 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 165.320280 min 
2018-05-21T02:26:52.666Z,1526869612.666 [Default:CheckIn:E] Stopped
2018-05-21T02:26:52.666Z,1526869612.666 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T02:26:52.666Z,1526869612.666 [Default:CheckIn] Stopped
2018-05-21T02:26:52.666Z,1526869612.666 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T02:26:52.666Z,1526869612.666 [Default:CheckIn](INFO): Running loop #17
2018-05-21T02:26:52.666Z,1526869612.666 [Default:CheckIn] Running Loop=17
2018-05-21T02:26:52.667Z,1526869612.667 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T02:26:52.667Z,1526869612.667 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T02:26:56.178Z,1526869616.178 [NAL9602](INFO): Powering up
2018-05-21T02:27:07.072Z,1526869627.072 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:27:07.872Z,1526869627.872 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T02:27:07.872Z,1526869627.872 [NAL9602] Data Fault, FailCount= 3
2018-05-21T02:27:07.872Z,1526869627.872 [NAL9602](ERROR): Data Fault
2018-05-21T02:27:07.951Z,1526869627.951 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T02:27:08.271Z,1526869628.271 [NAL9602](INFO): Powering down
2018-05-21T02:27:09.123Z,1526869629.123 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T02:27:09.123Z,1526869629.123 [NAL9602] No Fault, FailCount= 3
2018-05-21T02:27:38.671Z,1526869658.671 [NAL9602](INFO): Powering up NAL9602
2018-05-21T02:27:49.872Z,1526869669.872 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:28:38.147Z,1526869718.147 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:28:38.148Z,1526869718.148 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T02:28:38.148Z,1526869718.148 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:28:38.179Z,1526869718.179 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:28:38.557Z,1526869718.557 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:28:38.557Z,1526869718.557 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T02:28:38.937Z,1526869718.937 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:28:38.938Z,1526869718.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:28:38.939Z,1526869718.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:31:39.029Z,1526869899.029 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:31:39.029Z,1526869899.029 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T02:31:39.029Z,1526869899.029 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:31:39.042Z,1526869899.042 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:31:39.442Z,1526869899.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:31:39.442Z,1526869899.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T02:31:39.821Z,1526869899.821 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:31:39.821Z,1526869899.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:31:39.821Z,1526869899.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:31:53.024Z,1526869913.024 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T02:26:52.7Z
2018-05-21T02:31:53.024Z,1526869913.024 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T02:31:53.024Z,1526869913.024 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T02:31:56.913Z,1526869916.913 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0048.lzma
2018-05-21T02:31:57.712Z,1526869917.712 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0048.lzma.bak
2018-05-21T02:31:57.712Z,1526869917.712 [DataOverHttps](INFO): SBD MOMSN=8287787
2018-05-21T02:32:06.525Z,1526869926.525 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0049.lzma
2018-05-21T02:32:07.324Z,1526869927.324 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0049.lzma.bak
2018-05-21T02:32:07.324Z,1526869927.324 [DataOverHttps](INFO): SBD MOMSN=8287789
2018-05-21T02:32:08.021Z,1526869928.021 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T02:32:08.021Z,1526869928.021 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T02:32:08.021Z,1526869928.021 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T02:32:56.732Z,1526869976.732 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T02:33:27.519Z,1526870007.519 [NAL9602](INFO): Powering down
2018-05-21T02:34:22.867Z,1526870062.867 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T02:34:40.039Z,1526870080.039 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:34:40.040Z,1526870080.040 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T02:34:40.040Z,1526870080.040 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:34:40.052Z,1526870080.052 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:34:40.451Z,1526870080.451 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:34:40.451Z,1526870080.451 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T02:34:40.841Z,1526870080.841 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:34:40.842Z,1526870080.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:34:40.845Z,1526870080.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:37:08.285Z,1526870228.285 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T02:37:08.285Z,1526870228.285 [Default:CheckIn:C.Wait] Stopped
2018-05-21T02:37:08.286Z,1526870228.286 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T02:37:08.286Z,1526870228.286 [Default:CheckIn:D] Running Loop=1
2018-05-21T02:37:08.704Z,1526870228.704 [Default:CheckIn:D] Stopped
2018-05-21T02:37:08.704Z,1526870228.704 [Default:CheckIn:E] Running Loop=1
2018-05-21T02:37:09.088Z,1526870229.088 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.594368 min 
2018-05-21T02:37:09.088Z,1526870229.088 [Default:CheckIn:E] Stopped
2018-05-21T02:37:09.088Z,1526870229.088 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T02:37:09.088Z,1526870229.088 [Default:CheckIn] Stopped
2018-05-21T02:37:09.088Z,1526870229.088 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T02:37:09.089Z,1526870229.089 [Default:CheckIn](INFO): Running loop #18
2018-05-21T02:37:09.089Z,1526870229.089 [Default:CheckIn] Running Loop=18
2018-05-21T02:37:09.089Z,1526870229.089 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T02:37:09.089Z,1526870229.089 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T02:37:09.844Z,1526870229.844 [NAL9602](INFO): Powering up
2018-05-21T02:37:21.016Z,1526870241.016 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:37:41.066Z,1526870261.066 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:37:41.066Z,1526870261.066 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T02:37:41.067Z,1526870261.067 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:37:41.079Z,1526870261.079 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:37:41.491Z,1526870261.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:37:41.491Z,1526870261.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T02:37:41.865Z,1526870261.865 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:37:41.865Z,1526870261.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:37:41.865Z,1526870261.865 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:37:53.016Z,1526870273.016 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T02:37:53.094Z,1526870273.094 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T02:37:53.094Z,1526870273.094 [NAL9602] Data Fault, FailCount= 4
2018-05-21T02:37:53.094Z,1526870273.094 [NAL9602](ERROR): Data Fault
2018-05-21T02:37:53.170Z,1526870273.170 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T02:37:53.415Z,1526870273.415 [NAL9602](INFO): Powering down
2018-05-21T02:37:54.281Z,1526870274.281 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T02:37:54.282Z,1526870274.282 [NAL9602] No Fault, FailCount= 4
2018-05-21T02:38:23.467Z,1526870303.467 [NAL9602](INFO): Powering up NAL9602
2018-05-21T02:38:34.668Z,1526870314.668 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:38:35.468Z,1526870315.468 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T02:38:35.468Z,1526870315.468 [NAL9602] Data Fault, FailCount= 5
2018-05-21T02:38:35.468Z,1526870315.468 [NAL9602](ERROR): Data Fault
2018-05-21T02:38:35.564Z,1526870315.564 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T02:38:35.565Z,1526870315.565 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T02:38:35.867Z,1526870315.867 [NAL9602](INFO): Powering down
2018-05-21T02:38:35.938Z,1526870315.938 [CBIT](INFO): Critical error at 20180521T023835
2018-05-21T02:40:35.547Z,1526870435.547 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T02:40:35.547Z,1526870435.547 [NAL9602] No Fault, FailCount= 5
2018-05-21T02:40:35.883Z,1526870435.883 [NAL9602](INFO): Powering up NAL9602
2018-05-21T02:40:41.919Z,1526870441.919 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:40:41.919Z,1526870441.919 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T02:40:41.919Z,1526870441.919 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:40:41.960Z,1526870441.960 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:40:42.356Z,1526870442.356 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:40:42.357Z,1526870442.357 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T02:40:42.726Z,1526870442.726 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:40:42.727Z,1526870442.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:40:42.727Z,1526870442.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:40:47.086Z,1526870447.086 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:42:09.105Z,1526870529.105 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T02:37:09.1Z
2018-05-21T02:42:09.105Z,1526870529.105 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T02:42:09.106Z,1526870529.106 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T02:42:13.586Z,1526870533.586 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0051.lzma
2018-05-21T02:42:14.388Z,1526870534.388 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0051.lzma.bak
2018-05-21T02:42:14.388Z,1526870534.388 [DataOverHttps](INFO): SBD MOMSN=8287794
2018-05-21T02:42:23.394Z,1526870543.394 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180520T234132/Express0052.lzma
2018-05-21T02:42:24.164Z,1526870544.164 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0052.lzma.bak
2018-05-21T02:42:24.164Z,1526870544.164 [DataOverHttps](INFO): SBD MOMSN=8287797
2018-05-21T02:42:24.804Z,1526870544.804 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T02:42:24.856Z,1526870544.856 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T02:42:24.856Z,1526870544.856 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T02:42:24.856Z,1526870544.856 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T02:42:55.087Z,1526870575.087 [NAL9602](INFO): Powering down
2018-05-21T02:43:42.908Z,1526870622.908 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:43:42.909Z,1526870622.909 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T02:43:42.909Z,1526870622.909 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:43:42.930Z,1526870622.930 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:43:43.330Z,1526870623.330 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:43:43.330Z,1526870623.330 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T02:43:43.747Z,1526870623.747 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:43:43.748Z,1526870623.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:43:43.748Z,1526870623.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:44:22.921Z,1526870662.921 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T02:46:44.016Z,1526870804.016 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:46:44.016Z,1526870804.016 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T02:46:44.016Z,1526870804.016 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:46:44.041Z,1526870804.041 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:46:44.471Z,1526870804.471 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:46:44.471Z,1526870804.471 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T02:46:44.862Z,1526870804.862 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:46:44.862Z,1526870804.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:46:44.863Z,1526870804.863 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:47:25.224Z,1526870845.224 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T02:47:25.225Z,1526870845.225 [Default:CheckIn:C.Wait] Stopped
2018-05-21T02:47:25.225Z,1526870845.225 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T02:47:25.225Z,1526870845.225 [Default:CheckIn:D] Running Loop=1
2018-05-21T02:47:25.625Z,1526870845.625 [Default:CheckIn:D] Stopped
2018-05-21T02:47:25.625Z,1526870845.625 [Default:CheckIn:E] Running Loop=1
2018-05-21T02:47:26.019Z,1526870846.019 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.876400 min 
2018-05-21T02:47:26.019Z,1526870846.019 [Default:CheckIn:E] Stopped
2018-05-21T02:47:26.020Z,1526870846.020 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T02:47:26.020Z,1526870846.020 [Default:CheckIn] Stopped
2018-05-21T02:47:26.020Z,1526870846.020 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T02:47:26.020Z,1526870846.020 [Default:CheckIn](INFO): Running loop #19
2018-05-21T02:47:26.020Z,1526870846.020 [Default:CheckIn] Running Loop=19
2018-05-21T02:47:26.020Z,1526870846.020 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T02:47:26.020Z,1526870846.020 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T02:47:29.487Z,1526870849.487 [NAL9602](INFO): Powering up
2018-05-21T02:47:40.380Z,1526870860.380 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:48:12.376Z,1526870892.376 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T02:48:12.451Z,1526870892.451 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T02:48:12.451Z,1526870892.451 [NAL9602] Data Fault, FailCount= 1
2018-05-21T02:48:12.451Z,1526870892.451 [NAL9602](ERROR): Data Fault
2018-05-21T02:48:12.536Z,1526870892.536 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T02:48:12.775Z,1526870892.775 [NAL9602](INFO): Powering down
2018-05-21T02:48:13.666Z,1526870893.666 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T02:48:13.666Z,1526870893.666 [NAL9602] No Fault, FailCount= 1
2018-05-21T02:48:42.823Z,1526870922.823 [NAL9602](INFO): Powering up NAL9602
2018-05-21T02:48:54.024Z,1526870934.024 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:49:45.136Z,1526870985.136 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:49:45.136Z,1526870985.136 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T02:49:45.136Z,1526870985.136 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:49:45.148Z,1526870985.148 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:49:45.538Z,1526870985.538 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:49:45.538Z,1526870985.538 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T02:49:45.903Z,1526870985.903 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:49:45.903Z,1526870985.903 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:49:45.904Z,1526870985.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:52:26.305Z,1526871146.305 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T02:47:26.0Z
2018-05-21T02:52:26.305Z,1526871146.305 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T02:52:26.305Z,1526871146.305 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T02:52:30.779Z,1526871150.779 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0054.lzma
2018-05-21T02:52:31.576Z,1526871151.576 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0054.lzma.bak
2018-05-21T02:52:31.576Z,1526871151.576 [DataOverHttps](INFO): SBD MOMSN=8287803
2018-05-21T02:52:40.523Z,1526871160.523 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0055.lzma
2018-05-21T02:52:41.324Z,1526871161.324 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0055.lzma.bak
2018-05-21T02:52:41.324Z,1526871161.324 [DataOverHttps](INFO): SBD MOMSN=8287805
2018-05-21T02:52:42.021Z,1526871162.021 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T02:52:42.021Z,1526871162.021 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T02:52:42.021Z,1526871162.021 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T02:52:45.307Z,1526871165.307 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T02:52:46.228Z,1526871166.228 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:52:46.229Z,1526871166.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T02:52:46.229Z,1526871166.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:52:46.270Z,1526871166.270 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:52:46.639Z,1526871166.639 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:52:46.639Z,1526871166.639 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T02:52:47.026Z,1526871167.026 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:52:47.027Z,1526871167.027 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:52:47.027Z,1526871167.027 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:53:15.787Z,1526871195.787 [NAL9602](INFO): Powering down
2018-05-21T02:54:23.205Z,1526871263.205 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T02:55:47.204Z,1526871347.204 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:55:47.204Z,1526871347.204 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T02:55:47.204Z,1526871347.204 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:55:47.217Z,1526871347.217 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:55:47.616Z,1526871347.616 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:55:47.616Z,1526871347.616 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T02:55:48.018Z,1526871348.018 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:55:48.019Z,1526871348.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:55:48.019Z,1526871348.019 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T02:57:42.190Z,1526871462.190 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T02:57:42.191Z,1526871462.191 [Default:CheckIn:C.Wait] Stopped
2018-05-21T02:57:42.191Z,1526871462.191 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T02:57:42.191Z,1526871462.191 [Default:CheckIn:D] Running Loop=1
2018-05-21T02:57:42.585Z,1526871462.585 [Default:CheckIn:D] Stopped
2018-05-21T02:57:42.585Z,1526871462.585 [Default:CheckIn:E] Running Loop=1
2018-05-21T02:57:42.988Z,1526871462.988 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 196.159066 min 
2018-05-21T02:57:42.988Z,1526871462.988 [Default:CheckIn:E] Stopped
2018-05-21T02:57:42.988Z,1526871462.988 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T02:57:42.988Z,1526871462.988 [Default:CheckIn] Stopped
2018-05-21T02:57:42.989Z,1526871462.989 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T02:57:42.989Z,1526871462.989 [Default:CheckIn](INFO): Running loop #20
2018-05-21T02:57:42.989Z,1526871462.989 [Default:CheckIn] Running Loop=20
2018-05-21T02:57:42.989Z,1526871462.989 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T02:57:42.989Z,1526871462.989 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T02:57:46.443Z,1526871466.443 [NAL9602](INFO): Powering up
2018-05-21T02:57:57.320Z,1526871477.320 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:57:58.120Z,1526871478.120 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T02:57:58.120Z,1526871478.120 [NAL9602] Data Fault, FailCount= 2
2018-05-21T02:57:58.120Z,1526871478.120 [NAL9602](ERROR): Data Fault
2018-05-21T02:57:58.216Z,1526871478.216 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T02:57:58.519Z,1526871478.519 [NAL9602](INFO): Powering down
2018-05-21T02:57:59.380Z,1526871479.380 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T02:57:59.380Z,1526871479.380 [NAL9602] No Fault, FailCount= 2
2018-05-21T02:57:59.762Z,1526871479.762 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395013 seconds old.
2018-05-21T02:57:59.765Z,1526871479.765 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396404 seconds old.
2018-05-21T02:58:00.171Z,1526871480.171 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.804301 seconds old.
2018-05-21T02:58:00.173Z,1526871480.173 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.804717 seconds old.
2018-05-21T02:58:00.564Z,1526871480.564 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.197373 seconds old.
2018-05-21T02:58:00.566Z,1526871480.566 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.197743 seconds old.
2018-05-21T02:58:00.961Z,1526871480.961 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.594007 seconds old.
2018-05-21T02:58:00.963Z,1526871480.963 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.594612 seconds old.
2018-05-21T02:58:01.365Z,1526871481.365 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.998204 seconds old.
2018-05-21T02:58:01.367Z,1526871481.367 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.998845 seconds old.
2018-05-21T02:58:01.764Z,1526871481.764 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.397444 seconds old.
2018-05-21T02:58:01.766Z,1526871481.766 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.397849 seconds old.
2018-05-21T02:58:02.159Z,1526871482.159 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.792554 seconds old.
2018-05-21T02:58:02.161Z,1526871482.161 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.792947 seconds old.
2018-05-21T02:58:02.570Z,1526871482.570 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.203426 seconds old.
2018-05-21T02:58:02.572Z,1526871482.572 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.204213 seconds old.
2018-05-21T02:58:02.961Z,1526871482.961 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.594114 seconds old.
2018-05-21T02:58:02.963Z,1526871482.963 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.594593 seconds old.
2018-05-21T02:58:03.359Z,1526871483.359 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.992794 seconds old.
2018-05-21T02:58:03.361Z,1526871483.361 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.993174 seconds old.
2018-05-21T02:58:03.764Z,1526871483.764 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.396954 seconds old.
2018-05-21T02:58:03.766Z,1526871483.766 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.397336 seconds old.
2018-05-21T02:58:04.164Z,1526871484.164 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.797372 seconds old.
2018-05-21T02:58:04.166Z,1526871484.166 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.797750 seconds old.
2018-05-21T02:58:04.565Z,1526871484.565 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.198501 seconds old.
2018-05-21T02:58:04.572Z,1526871484.572 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.203274 seconds old.
2018-05-21T02:58:04.960Z,1526871484.960 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.593349 seconds old.
2018-05-21T02:58:04.962Z,1526871484.962 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.593741 seconds old.
2018-05-21T02:58:05.364Z,1526871485.364 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.997399 seconds old.
2018-05-21T02:58:05.366Z,1526871485.366 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.997782 seconds old.
2018-05-21T02:58:05.768Z,1526871485.768 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.401679 seconds old.
2018-05-21T02:58:05.771Z,1526871485.771 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.402444 seconds old.
2018-05-21T02:58:28.920Z,1526871508.920 [NAL9602](INFO): Powering up NAL9602
2018-05-21T02:58:40.128Z,1526871520.128 [NAL9602](INFO): NAL9602 initialized
2018-05-21T02:58:48.148Z,1526871528.148 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T02:58:48.148Z,1526871528.148 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T02:58:48.148Z,1526871528.148 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T02:58:48.173Z,1526871528.173 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T02:58:48.596Z,1526871528.596 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T02:58:48.597Z,1526871528.597 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T02:58:48.962Z,1526871528.962 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T02:58:48.963Z,1526871528.963 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T02:58:48.963Z,1526871528.963 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:01:49.179Z,1526871709.179 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:01:49.179Z,1526871709.179 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T03:01:49.179Z,1526871709.179 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:01:49.216Z,1526871709.216 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:01:49.618Z,1526871709.618 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:01:49.618Z,1526871709.618 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T03:01:49.982Z,1526871709.982 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:01:49.983Z,1526871709.983 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:01:49.983Z,1526871709.983 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:02:43.181Z,1526871763.181 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T02:57:42.0Z
2018-05-21T03:02:43.181Z,1526871763.181 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T03:02:43.181Z,1526871763.181 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T03:02:47.605Z,1526871767.605 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0057.lzma
2018-05-21T03:02:48.396Z,1526871768.396 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0057.lzma.bak
2018-05-21T03:02:48.396Z,1526871768.396 [DataOverHttps](INFO): SBD MOMSN=8287810
2018-05-21T03:02:57.297Z,1526871777.297 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0058.lzma
2018-05-21T03:02:58.088Z,1526871778.088 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0058.lzma.bak
2018-05-21T03:02:58.088Z,1526871778.088 [DataOverHttps](INFO): SBD MOMSN=8287812
2018-05-21T03:02:58.792Z,1526871778.792 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T03:02:58.792Z,1526871778.792 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T03:02:58.792Z,1526871778.792 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T03:03:29.745Z,1526871809.745 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.384225 seconds old.
2018-05-21T03:03:29.747Z,1526871809.747 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.384880 seconds old.
2018-05-21T03:03:30.152Z,1526871810.152 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.791714 seconds old.
2018-05-21T03:03:30.155Z,1526871810.155 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.792306 seconds old.
2018-05-21T03:03:30.560Z,1526871810.560 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.199466 seconds old.
2018-05-21T03:03:30.562Z,1526871810.562 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.199877 seconds old.
2018-05-21T03:03:44.104Z,1526871824.104 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T03:04:14.615Z,1526871854.615 [NAL9602](INFO): Powering down
2018-05-21T03:04:23.474Z,1526871863.474 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T03:04:50.260Z,1526871890.260 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:04:50.260Z,1526871890.260 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T03:04:50.260Z,1526871890.260 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:04:50.320Z,1526871890.320 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:04:50.667Z,1526871890.667 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:04:50.667Z,1526871890.667 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T03:04:51.058Z,1526871891.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:04:51.059Z,1526871891.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:04:51.059Z,1526871891.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:07:51.241Z,1526872071.241 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:07:51.241Z,1526872071.241 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T03:07:51.241Z,1526872071.241 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:07:51.283Z,1526872071.283 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:07:51.693Z,1526872071.693 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:07:51.693Z,1526872071.693 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T03:07:52.045Z,1526872072.045 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:07:52.045Z,1526872072.045 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:07:52.046Z,1526872072.046 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:07:59.242Z,1526872079.242 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T03:07:59.243Z,1526872079.243 [Default:CheckIn:C.Wait] Stopped
2018-05-21T03:07:59.243Z,1526872079.243 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T03:07:59.243Z,1526872079.243 [Default:CheckIn:D] Running Loop=1
2018-05-21T03:07:59.649Z,1526872079.649 [Default:CheckIn:D] Stopped
2018-05-21T03:07:59.649Z,1526872079.649 [Default:CheckIn:E] Running Loop=1
2018-05-21T03:08:02.838Z,1526872082.838 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.443457 min 
2018-05-21T03:08:02.839Z,1526872082.839 [Default:CheckIn:E] Stopped
2018-05-21T03:08:02.839Z,1526872082.839 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T03:08:02.839Z,1526872082.839 [Default:CheckIn] Stopped
2018-05-21T03:08:02.839Z,1526872082.839 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T03:08:02.839Z,1526872082.839 [Default:CheckIn](INFO): Running loop #21
2018-05-21T03:08:02.839Z,1526872082.839 [Default:CheckIn] Running Loop=21
2018-05-21T03:08:02.839Z,1526872082.839 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T03:08:02.839Z,1526872082.839 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T03:08:03.263Z,1526872083.263 [NAL9602](INFO): Powering up
2018-05-21T03:08:14.463Z,1526872094.463 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:08:46.468Z,1526872126.468 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T03:08:46.542Z,1526872126.542 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T03:08:46.542Z,1526872126.542 [NAL9602] Data Fault, FailCount= 3
2018-05-21T03:08:46.542Z,1526872126.542 [NAL9602](ERROR): Data Fault
2018-05-21T03:08:46.620Z,1526872126.620 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T03:08:46.863Z,1526872126.863 [NAL9602](INFO): Powering down
2018-05-21T03:08:47.728Z,1526872127.728 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T03:08:47.728Z,1526872127.728 [NAL9602] No Fault, FailCount= 3
2018-05-21T03:09:17.024Z,1526872157.024 [NAL9602](INFO): Powering up NAL9602
2018-05-21T03:09:28.224Z,1526872168.224 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:09:29.024Z,1526872169.024 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T03:09:29.024Z,1526872169.024 [NAL9602] Data Fault, FailCount= 4
2018-05-21T03:09:29.024Z,1526872169.024 [NAL9602](ERROR): Data Fault
2018-05-21T03:09:29.104Z,1526872169.104 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T03:09:29.423Z,1526872169.423 [NAL9602](INFO): Powering down
2018-05-21T03:09:30.282Z,1526872170.282 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T03:09:30.282Z,1526872170.282 [NAL9602] No Fault, FailCount= 4
2018-05-21T03:09:59.824Z,1526872199.824 [NAL9602](INFO): Powering up NAL9602
2018-05-21T03:10:11.003Z,1526872211.003 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:10:52.263Z,1526872252.263 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:10:52.263Z,1526872252.263 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T03:10:52.263Z,1526872252.263 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:10:52.276Z,1526872252.276 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:10:52.670Z,1526872252.670 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:10:52.670Z,1526872252.670 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T03:10:53.058Z,1526872253.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:10:53.058Z,1526872253.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:10:53.059Z,1526872253.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:13:03.701Z,1526872383.701 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T03:08:02.8Z
2018-05-21T03:13:03.701Z,1526872383.701 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T03:13:03.701Z,1526872383.701 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T03:13:08.787Z,1526872388.787 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0060.lzma
2018-05-21T03:13:09.580Z,1526872389.580 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0060.lzma.bak
2018-05-21T03:13:09.580Z,1526872389.580 [DataOverHttps](INFO): SBD MOMSN=8287817
2018-05-21T03:13:18.301Z,1526872398.301 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T03:13:18.393Z,1526872398.393 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0061.lzma
2018-05-21T03:13:19.188Z,1526872399.188 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0061.lzma.bak
2018-05-21T03:13:19.188Z,1526872399.188 [DataOverHttps](INFO): SBD MOMSN=8287819
2018-05-21T03:13:19.876Z,1526872399.876 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T03:13:19.876Z,1526872399.876 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T03:13:19.876Z,1526872399.876 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T03:13:48.595Z,1526872428.595 [NAL9602](INFO): Powering down
2018-05-21T03:13:53.443Z,1526872433.443 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:13:53.443Z,1526872433.443 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T03:13:53.443Z,1526872433.443 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:13:53.458Z,1526872433.458 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:13:53.848Z,1526872433.848 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:13:53.848Z,1526872433.848 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T03:13:54.242Z,1526872434.242 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:13:54.243Z,1526872434.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:13:54.243Z,1526872434.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:14:23.772Z,1526872463.772 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T03:16:54.310Z,1526872614.310 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:16:54.310Z,1526872614.310 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T03:16:54.310Z,1526872614.310 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:16:54.323Z,1526872614.323 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:16:54.718Z,1526872614.718 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:16:54.718Z,1526872614.718 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T03:16:55.107Z,1526872615.107 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:16:55.107Z,1526872615.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:16:55.107Z,1526872615.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:18:20.309Z,1526872700.309 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T03:18:20.309Z,1526872700.309 [Default:CheckIn:C.Wait] Stopped
2018-05-21T03:18:20.309Z,1526872700.309 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T03:18:20.309Z,1526872700.309 [Default:CheckIn:D] Running Loop=1
2018-05-21T03:18:20.705Z,1526872700.705 [Default:CheckIn:D] Stopped
2018-05-21T03:18:20.706Z,1526872700.706 [Default:CheckIn:E] Running Loop=1
2018-05-21T03:18:21.110Z,1526872701.110 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 216.794401 min 
2018-05-21T03:18:21.110Z,1526872701.110 [Default:CheckIn:E] Stopped
2018-05-21T03:18:21.110Z,1526872701.110 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T03:18:21.110Z,1526872701.110 [Default:CheckIn] Stopped
2018-05-21T03:18:21.110Z,1526872701.110 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T03:18:21.111Z,1526872701.111 [Default:CheckIn](INFO): Running loop #22
2018-05-21T03:18:21.111Z,1526872701.111 [Default:CheckIn] Running Loop=22
2018-05-21T03:18:21.111Z,1526872701.111 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T03:18:21.111Z,1526872701.111 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T03:18:24.607Z,1526872704.607 [NAL9602](INFO): Powering up
2018-05-21T03:18:35.480Z,1526872715.480 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:19:07.484Z,1526872747.484 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T03:19:07.562Z,1526872747.562 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T03:19:07.562Z,1526872747.562 [NAL9602] Data Fault, FailCount= 5
2018-05-21T03:19:07.562Z,1526872747.562 [NAL9602](ERROR): Data Fault
2018-05-21T03:19:07.655Z,1526872747.655 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T03:19:07.656Z,1526872747.656 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T03:19:07.879Z,1526872747.879 [NAL9602](INFO): Powering down
2018-05-21T03:19:07.961Z,1526872747.961 [CBIT](INFO): Critical error at 20180521T031907
2018-05-21T03:19:55.152Z,1526872795.152 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:19:55.152Z,1526872795.152 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T03:19:55.152Z,1526872795.152 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:19:55.165Z,1526872795.165 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:19:55.567Z,1526872795.567 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:19:55.567Z,1526872795.567 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T03:19:55.953Z,1526872795.953 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:19:55.954Z,1526872795.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:19:55.954Z,1526872795.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:21:07.653Z,1526872867.653 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T03:21:07.653Z,1526872867.653 [NAL9602] No Fault, FailCount= 5
2018-05-21T03:21:07.967Z,1526872867.967 [NAL9602](INFO): Powering up NAL9602
2018-05-21T03:21:19.168Z,1526872879.168 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:21:19.968Z,1526872879.968 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T03:21:19.968Z,1526872879.968 [NAL9602] Data Fault, FailCount= 1
2018-05-21T03:21:19.968Z,1526872879.968 [NAL9602](ERROR): Data Fault
2018-05-21T03:21:20.051Z,1526872880.051 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T03:21:20.367Z,1526872880.367 [NAL9602](INFO): Powering down
2018-05-21T03:21:21.224Z,1526872881.224 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T03:21:21.224Z,1526872881.224 [NAL9602] No Fault, FailCount= 1
2018-05-21T03:21:50.763Z,1526872910.763 [NAL9602](INFO): Powering up NAL9602
2018-05-21T03:22:01.564Z,1526872921.564 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:22:56.037Z,1526872976.037 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:22:56.037Z,1526872976.037 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T03:22:56.037Z,1526872976.037 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:22:56.049Z,1526872976.049 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:22:56.050Z,1526872976.050 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:23:21.223Z,1526873001.223 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T03:18:21.1Z
2018-05-21T03:23:21.223Z,1526873001.223 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T03:23:21.223Z,1526873001.223 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T03:23:25.294Z,1526873005.294 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0063.lzma
2018-05-21T03:23:26.096Z,1526873006.096 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0063.lzma.bak
2018-05-21T03:23:26.096Z,1526873006.096 [DataOverHttps](INFO): SBD MOMSN=8287825
2018-05-21T03:23:34.908Z,1526873014.908 [DataOverHttps](INFO): Sending 310 bytes from file Logs/20180520T234132/Express0064.lzma
2018-05-21T03:23:35.704Z,1526873015.704 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0064.lzma.bak
2018-05-21T03:23:35.704Z,1526873015.704 [DataOverHttps](INFO): SBD MOMSN=8287828
2018-05-21T03:23:36.387Z,1526873016.387 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T03:23:36.387Z,1526873016.387 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T03:23:36.387Z,1526873016.387 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T03:23:39.723Z,1526873019.723 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T03:23:57.434Z,1526873037.434 [BPC1](ERROR): Failed to parse Bank B battery data
2018-05-21T03:24:10.211Z,1526873050.211 [NAL9602](INFO): Powering down
2018-05-21T03:24:23.911Z,1526873063.911 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T03:28:36.653Z,1526873316.653 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T03:28:36.653Z,1526873316.653 [Default:CheckIn:C.Wait] Stopped
2018-05-21T03:28:36.654Z,1526873316.654 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T03:28:36.654Z,1526873316.654 [Default:CheckIn:D] Running Loop=1
2018-05-21T03:28:37.064Z,1526873317.064 [Default:CheckIn:D] Stopped
2018-05-21T03:28:37.064Z,1526873317.064 [Default:CheckIn:E] Running Loop=1
2018-05-21T03:28:37.468Z,1526873317.468 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 227.067057 min 
2018-05-21T03:28:37.468Z,1526873317.468 [Default:CheckIn:E] Stopped
2018-05-21T03:28:37.468Z,1526873317.468 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T03:28:37.468Z,1526873317.468 [Default:CheckIn] Stopped
2018-05-21T03:28:37.468Z,1526873317.468 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T03:28:37.468Z,1526873317.468 [Default:CheckIn](INFO): Running loop #23
2018-05-21T03:28:37.468Z,1526873317.468 [Default:CheckIn] Running Loop=23
2018-05-21T03:28:37.469Z,1526873317.469 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T03:28:37.469Z,1526873317.469 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T03:28:40.635Z,1526873320.635 [NAL9602](INFO): Powering up
2018-05-21T03:28:51.784Z,1526873331.784 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:29:23.784Z,1526873363.784 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T03:29:23.858Z,1526873363.858 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T03:29:23.858Z,1526873363.858 [NAL9602] Data Fault, FailCount= 2
2018-05-21T03:29:23.858Z,1526873363.858 [NAL9602](ERROR): Data Fault
2018-05-21T03:29:23.921Z,1526873363.921 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T03:29:24.183Z,1526873364.183 [NAL9602](INFO): Powering down
2018-05-21T03:29:25.038Z,1526873365.038 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T03:29:25.038Z,1526873365.038 [NAL9602] No Fault, FailCount= 2
2018-05-21T03:29:54.583Z,1526873394.583 [NAL9602](INFO): Powering up NAL9602
2018-05-21T03:30:05.783Z,1526873405.783 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:30:14.626Z,1526873414.626 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T03:30:14.626Z,1526873414.626 [BPC1] Communications Fault, FailCount= 1
2018-05-21T03:30:14.626Z,1526873414.626 [BPC1](ERROR): Communications Fault
2018-05-21T03:30:14.650Z,1526873414.650 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T03:30:15.867Z,1526873415.867 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T03:30:15.867Z,1526873415.867 [BPC1] No Fault, FailCount= 1
2018-05-21T03:33:37.531Z,1526873617.531 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T03:28:37.5Z
2018-05-21T03:33:37.531Z,1526873617.531 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T03:33:37.531Z,1526873617.531 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T03:33:41.495Z,1526873621.495 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0066.lzma
2018-05-21T03:33:42.288Z,1526873622.288 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0066.lzma.bak
2018-05-21T03:33:42.288Z,1526873622.288 [DataOverHttps](INFO): SBD MOMSN=8287835
2018-05-21T03:33:51.398Z,1526873631.398 [DataOverHttps](INFO): Sending 239 bytes from file Logs/20180520T234132/Express0067.lzma
2018-05-21T03:33:52.200Z,1526873632.200 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0067.lzma.bak
2018-05-21T03:33:52.200Z,1526873632.200 [DataOverHttps](INFO): SBD MOMSN=8287837
2018-05-21T03:33:52.888Z,1526873632.888 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T03:33:52.888Z,1526873632.888 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T03:33:52.889Z,1526873632.889 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T03:33:56.108Z,1526873636.108 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T03:34:24.285Z,1526873664.285 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T03:34:26.619Z,1526873666.619 [NAL9602](INFO): Powering down
2018-05-21T03:37:19.227Z,1526873839.227 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T03:37:19.228Z,1526873839.228 [BPC1] Communications Fault, FailCount= 2
2018-05-21T03:37:19.228Z,1526873839.228 [BPC1](ERROR): Communications Fault
2018-05-21T03:37:19.264Z,1526873839.264 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T03:37:20.498Z,1526873840.498 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T03:37:20.498Z,1526873840.498 [BPC1] No Fault, FailCount= 2
2018-05-21T03:37:57.257Z,1526873877.257 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:37:57.257Z,1526873877.257 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T03:37:57.353Z,1526873877.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:37:57.354Z,1526873877.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:37:57.355Z,1526873877.355 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:38:53.335Z,1526873933.335 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T03:38:53.336Z,1526873933.336 [Default:CheckIn:C.Wait] Stopped
2018-05-21T03:38:53.336Z,1526873933.336 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T03:38:53.336Z,1526873933.336 [Default:CheckIn:D] Running Loop=1
2018-05-21T03:38:53.734Z,1526873933.734 [Default:CheckIn:D] Stopped
2018-05-21T03:38:53.734Z,1526873933.734 [Default:CheckIn:E] Running Loop=1
2018-05-21T03:38:54.133Z,1526873934.133 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 237.344889 min 
2018-05-21T03:38:54.133Z,1526873934.133 [Default:CheckIn:E] Stopped
2018-05-21T03:38:54.133Z,1526873934.133 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T03:38:54.133Z,1526873934.133 [Default:CheckIn] Stopped
2018-05-21T03:38:54.133Z,1526873934.133 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T03:38:54.134Z,1526873934.134 [Default:CheckIn](INFO): Running loop #24
2018-05-21T03:38:54.134Z,1526873934.134 [Default:CheckIn] Running Loop=24
2018-05-21T03:38:54.134Z,1526873934.134 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T03:38:54.134Z,1526873934.134 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T03:38:57.523Z,1526873937.523 [NAL9602](INFO): Powering up
2018-05-21T03:39:08.668Z,1526873948.668 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:39:09.468Z,1526873949.468 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T03:39:09.468Z,1526873949.468 [NAL9602] Data Fault, FailCount= 3
2018-05-21T03:39:09.468Z,1526873949.468 [NAL9602](ERROR): Data Fault
2018-05-21T03:39:09.579Z,1526873949.579 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T03:39:09.867Z,1526873949.867 [NAL9602](INFO): Powering down
2018-05-21T03:39:10.728Z,1526873950.728 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T03:39:10.729Z,1526873950.729 [NAL9602] No Fault, FailCount= 3
2018-05-21T03:39:40.268Z,1526873980.268 [NAL9602](INFO): Powering up NAL9602
2018-05-21T03:39:51.467Z,1526873991.467 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:40:57.813Z,1526874057.813 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:40:57.813Z,1526874057.813 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T03:40:57.813Z,1526874057.813 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:40:57.826Z,1526874057.826 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:40:57.975Z,1526874057.975 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:40:57.975Z,1526874057.975 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T03:40:58.306Z,1526874058.306 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:40:58.307Z,1526874058.307 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:40:58.307Z,1526874058.307 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:43:54.199Z,1526874234.199 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T03:38:54.1Z
2018-05-21T03:43:54.199Z,1526874234.199 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T03:43:54.199Z,1526874234.199 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T03:43:58.141Z,1526874238.141 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0069.lzma
2018-05-21T03:43:58.595Z,1526874238.595 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:43:58.595Z,1526874238.595 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T03:43:58.595Z,1526874238.595 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:43:58.608Z,1526874238.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:43:58.936Z,1526874238.936 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0069.lzma.bak
2018-05-21T03:43:58.936Z,1526874238.936 [DataOverHttps](INFO): SBD MOMSN=8287842
2018-05-21T03:43:59.031Z,1526874239.031 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:43:59.031Z,1526874239.031 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T03:43:59.644Z,1526874239.644 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:43:59.645Z,1526874239.645 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:43:59.645Z,1526874239.645 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:44:08.008Z,1526874248.008 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20180520T234132/Express0070.lzma
2018-05-21T03:44:08.784Z,1526874248.784 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0070.lzma.bak
2018-05-21T03:44:08.784Z,1526874248.784 [DataOverHttps](INFO): SBD MOMSN=8287844
2018-05-21T03:44:09.470Z,1526874249.470 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T03:44:09.470Z,1526874249.470 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T03:44:09.470Z,1526874249.470 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T03:44:24.476Z,1526874264.476 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T03:44:57.583Z,1526874297.583 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T03:45:28.243Z,1526874328.243 [NAL9602](INFO): Powering down
2018-05-21T03:45:34.672Z,1526874334.672 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T03:45:34.672Z,1526874334.672 [BPC1] Communications Fault, FailCount= 3
2018-05-21T03:45:34.672Z,1526874334.672 [BPC1](ERROR): Communications Fault
2018-05-21T03:45:34.696Z,1526874334.696 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T03:45:35.899Z,1526874335.899 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T03:45:35.899Z,1526874335.899 [BPC1] No Fault, FailCount= 3
2018-05-21T03:46:59.655Z,1526874419.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:46:59.655Z,1526874419.655 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T03:46:59.656Z,1526874419.656 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:46:59.684Z,1526874419.684 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:47:00.064Z,1526874420.064 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:47:00.064Z,1526874420.064 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T03:47:00.457Z,1526874420.457 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:47:00.457Z,1526874420.457 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:47:00.458Z,1526874420.458 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:49:09.683Z,1526874549.683 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T03:49:09.683Z,1526874549.683 [Default:CheckIn:C.Wait] Stopped
2018-05-21T03:49:09.683Z,1526874549.683 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T03:49:09.683Z,1526874549.683 [Default:CheckIn:D] Running Loop=1
2018-05-21T03:49:10.083Z,1526874550.083 [Default:CheckIn:D] Stopped
2018-05-21T03:49:10.083Z,1526874550.083 [Default:CheckIn:E] Running Loop=1
2018-05-21T03:49:10.484Z,1526874550.484 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 247.617367 min 
2018-05-21T03:49:10.484Z,1526874550.484 [Default:CheckIn:E] Stopped
2018-05-21T03:49:10.484Z,1526874550.484 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T03:49:10.484Z,1526874550.484 [Default:CheckIn] Stopped
2018-05-21T03:49:10.484Z,1526874550.484 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T03:49:10.485Z,1526874550.485 [Default:CheckIn](INFO): Running loop #25
2018-05-21T03:49:10.485Z,1526874550.485 [Default:CheckIn] Running Loop=25
2018-05-21T03:49:10.485Z,1526874550.485 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T03:49:10.485Z,1526874550.485 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T03:49:14.149Z,1526874554.149 [NAL9602](INFO): Powering up
2018-05-21T03:49:25.036Z,1526874565.036 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:49:57.036Z,1526874597.036 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T03:49:57.118Z,1526874597.118 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T03:49:57.118Z,1526874597.118 [NAL9602] Data Fault, FailCount= 4
2018-05-21T03:49:57.118Z,1526874597.118 [NAL9602](ERROR): Data Fault
2018-05-21T03:49:57.201Z,1526874597.201 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T03:49:57.435Z,1526874597.435 [NAL9602](INFO): Powering down
2018-05-21T03:49:58.295Z,1526874598.295 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T03:49:58.295Z,1526874598.295 [NAL9602] No Fault, FailCount= 4
2018-05-21T03:50:00.681Z,1526874600.681 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:50:00.681Z,1526874600.681 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T03:50:00.681Z,1526874600.681 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:50:00.693Z,1526874600.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:50:01.097Z,1526874601.097 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:50:01.097Z,1526874601.097 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T03:50:01.493Z,1526874601.493 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:50:01.493Z,1526874601.493 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:50:01.494Z,1526874601.494 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:50:27.803Z,1526874627.803 [NAL9602](INFO): Powering up NAL9602
2018-05-21T03:50:39.008Z,1526874639.008 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:50:39.804Z,1526874639.804 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T03:50:39.804Z,1526874639.804 [NAL9602] Data Fault, FailCount= 5
2018-05-21T03:50:39.804Z,1526874639.804 [NAL9602](ERROR): Data Fault
2018-05-21T03:50:39.877Z,1526874639.877 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T03:50:39.878Z,1526874639.878 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T03:50:40.207Z,1526874640.207 [NAL9602](INFO): Powering down
2018-05-21T03:50:40.287Z,1526874640.287 [CBIT](INFO): Critical error at 20180521T035039
2018-05-21T03:52:22.264Z,1526874742.264 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T03:52:22.265Z,1526874742.265 [BPC1] Communications Fault, FailCount= 4
2018-05-21T03:52:22.265Z,1526874742.265 [BPC1](ERROR): Communications Fault
2018-05-21T03:52:22.289Z,1526874742.289 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T03:52:23.511Z,1526874743.511 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T03:52:23.511Z,1526874743.511 [BPC1] No Fault, FailCount= 4
2018-05-21T03:52:39.902Z,1526874759.902 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T03:52:39.903Z,1526874759.903 [NAL9602] No Fault, FailCount= 5
2018-05-21T03:52:40.235Z,1526874760.235 [NAL9602](INFO): Powering up NAL9602
2018-05-21T03:52:51.436Z,1526874771.436 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:53:01.880Z,1526874781.880 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:53:01.880Z,1526874781.880 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T03:53:01.880Z,1526874781.880 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:53:01.893Z,1526874781.893 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:53:02.291Z,1526874782.291 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:53:02.291Z,1526874782.291 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T03:53:02.684Z,1526874782.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:53:02.685Z,1526874782.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:53:02.685Z,1526874782.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:54:10.861Z,1526874850.861 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T03:49:10.5Z
2018-05-21T03:54:10.861Z,1526874850.861 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T03:54:10.862Z,1526874850.862 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T03:54:15.324Z,1526874855.324 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0072.lzma
2018-05-21T03:54:16.101Z,1526874856.101 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0072.lzma.bak
2018-05-21T03:54:16.102Z,1526874856.102 [DataOverHttps](INFO): SBD MOMSN=8287849
2018-05-21T03:54:25.221Z,1526874865.221 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T03:54:25.262Z,1526874865.262 [DataOverHttps](INFO): Sending 253 bytes from file Logs/20180520T234132/Express0073.lzma
2018-05-21T03:54:26.032Z,1526874866.032 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0073.lzma.bak
2018-05-21T03:54:26.032Z,1526874866.032 [DataOverHttps](INFO): SBD MOMSN=8287852
2018-05-21T03:54:26.717Z,1526874866.717 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T03:54:26.717Z,1526874866.717 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T03:54:26.717Z,1526874866.717 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T03:54:30.198Z,1526874870.198 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T03:55:00.715Z,1526874900.715 [NAL9602](INFO): Powering down
2018-05-21T03:56:02.819Z,1526874962.819 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:56:02.819Z,1526874962.819 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T03:56:02.820Z,1526874962.820 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:56:02.852Z,1526874962.852 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:56:03.226Z,1526874963.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:56:03.226Z,1526874963.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T03:56:03.607Z,1526874963.607 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:56:03.608Z,1526874963.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:56:03.608Z,1526874963.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:59:03.798Z,1526875143.798 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T03:59:03.798Z,1526875143.798 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T03:59:03.798Z,1526875143.798 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T03:59:03.834Z,1526875143.834 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T03:59:04.225Z,1526875144.225 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T03:59:04.225Z,1526875144.225 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T03:59:04.596Z,1526875144.596 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T03:59:04.596Z,1526875144.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T03:59:04.597Z,1526875144.597 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T03:59:26.999Z,1526875166.999 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T03:59:26.999Z,1526875166.999 [Default:CheckIn:C.Wait] Stopped
2018-05-21T03:59:26.999Z,1526875166.999 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T03:59:26.999Z,1526875166.999 [Default:CheckIn:D] Running Loop=1
2018-05-21T03:59:27.405Z,1526875167.405 [Default:CheckIn:D] Stopped
2018-05-21T03:59:27.405Z,1526875167.405 [Default:CheckIn:E] Running Loop=1
2018-05-21T03:59:27.800Z,1526875167.800 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 257.906055 min 
2018-05-21T03:59:27.801Z,1526875167.801 [Default:CheckIn:E] Stopped
2018-05-21T03:59:27.801Z,1526875167.801 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T03:59:27.801Z,1526875167.801 [Default:CheckIn] Stopped
2018-05-21T03:59:27.801Z,1526875167.801 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T03:59:27.801Z,1526875167.801 [Default:CheckIn](INFO): Running loop #26
2018-05-21T03:59:27.801Z,1526875167.801 [Default:CheckIn] Running Loop=26
2018-05-21T03:59:27.802Z,1526875167.802 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T03:59:27.802Z,1526875167.802 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T03:59:31.085Z,1526875171.085 [NAL9602](INFO): Powering up
2018-05-21T03:59:42.268Z,1526875182.268 [NAL9602](INFO): NAL9602 initialized
2018-05-21T03:59:55.898Z,1526875195.898 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T03:59:55.898Z,1526875195.898 [BPC1] Communications Fault, FailCount= 5
2018-05-21T03:59:55.898Z,1526875195.898 [BPC1](ERROR): Communications Fault
2018-05-21T03:59:55.954Z,1526875195.954 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T03:59:57.124Z,1526875197.124 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T03:59:57.124Z,1526875197.124 [BPC1] No Fault, FailCount= 5
2018-05-21T04:00:14.268Z,1526875214.268 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T04:00:14.350Z,1526875214.350 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T04:00:14.350Z,1526875214.350 [NAL9602] Data Fault, FailCount= 1
2018-05-21T04:00:14.350Z,1526875214.350 [NAL9602](ERROR): Data Fault
2018-05-21T04:00:14.440Z,1526875214.440 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T04:00:14.667Z,1526875214.667 [NAL9602](INFO): Powering down
2018-05-21T04:00:15.520Z,1526875215.520 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T04:00:15.520Z,1526875215.520 [NAL9602] No Fault, FailCount= 1
2018-05-21T04:00:44.848Z,1526875244.848 [NAL9602](INFO): Powering up NAL9602
2018-05-21T04:00:56.044Z,1526875256.044 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:02:04.888Z,1526875324.888 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:02:04.888Z,1526875324.888 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T04:02:04.889Z,1526875324.889 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:02:04.919Z,1526875324.919 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:02:05.294Z,1526875325.294 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:02:05.294Z,1526875325.294 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T04:02:05.675Z,1526875325.675 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:02:05.675Z,1526875325.675 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:02:05.676Z,1526875325.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:04:25.227Z,1526875465.227 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T04:04:27.997Z,1526875467.997 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T03:59:27.8Z
2018-05-21T04:04:27.997Z,1526875467.997 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T04:04:27.998Z,1526875467.998 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T04:04:31.979Z,1526875471.979 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0075.lzma
2018-05-21T04:04:32.768Z,1526875472.768 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0075.lzma.bak
2018-05-21T04:04:32.768Z,1526875472.768 [DataOverHttps](INFO): SBD MOMSN=8287858
2018-05-21T04:04:41.835Z,1526875481.835 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0076.lzma
2018-05-21T04:04:42.636Z,1526875482.636 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0076.lzma.bak
2018-05-21T04:04:42.636Z,1526875482.636 [DataOverHttps](INFO): SBD MOMSN=8287860
2018-05-21T04:04:43.321Z,1526875483.321 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T04:04:43.321Z,1526875483.321 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T04:04:43.321Z,1526875483.321 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T04:04:46.545Z,1526875486.545 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T04:05:05.874Z,1526875505.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:05:05.875Z,1526875505.875 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T04:05:05.875Z,1526875505.875 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:05:05.888Z,1526875505.888 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:05:06.290Z,1526875506.290 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:05:06.291Z,1526875506.291 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T04:05:06.674Z,1526875506.674 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:05:06.674Z,1526875506.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:05:06.675Z,1526875506.675 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:05:17.043Z,1526875517.043 [NAL9602](INFO): Powering down
2018-05-21T04:06:26.706Z,1526875586.706 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T04:06:26.706Z,1526875586.706 [BPC1] Communications Fault, FailCount= 6
2018-05-21T04:06:26.707Z,1526875586.707 [BPC1](ERROR): Communications Fault
2018-05-21T04:06:26.731Z,1526875586.731 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T04:06:27.929Z,1526875587.929 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T04:06:27.929Z,1526875587.929 [BPC1] No Fault, FailCount= 6
2018-05-21T04:08:06.770Z,1526875686.770 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:08:06.770Z,1526875686.770 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T04:08:06.770Z,1526875686.770 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:08:06.784Z,1526875686.784 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:08:07.187Z,1526875687.187 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:08:07.187Z,1526875687.187 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T04:08:07.550Z,1526875687.550 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:08:07.566Z,1526875687.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:08:07.567Z,1526875687.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:09:43.570Z,1526875783.570 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T04:09:43.570Z,1526875783.570 [Default:CheckIn:C.Wait] Stopped
2018-05-21T04:09:43.571Z,1526875783.571 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T04:09:43.571Z,1526875783.571 [Default:CheckIn:D] Running Loop=1
2018-05-21T04:09:43.981Z,1526875783.981 [Default:CheckIn:D] Stopped
2018-05-21T04:09:43.981Z,1526875783.981 [Default:CheckIn:E] Running Loop=1
2018-05-21T04:09:47.139Z,1526875787.139 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 268.182340 min 
2018-05-21T04:09:47.139Z,1526875787.139 [Default:CheckIn:E] Stopped
2018-05-21T04:09:47.139Z,1526875787.139 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T04:09:47.139Z,1526875787.139 [Default:CheckIn] Stopped
2018-05-21T04:09:47.140Z,1526875787.140 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T04:09:47.140Z,1526875787.140 [Default:CheckIn](INFO): Running loop #27
2018-05-21T04:09:47.140Z,1526875787.140 [Default:CheckIn] Running Loop=27
2018-05-21T04:09:47.140Z,1526875787.140 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T04:09:47.140Z,1526875787.140 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T04:09:47.603Z,1526875787.603 [NAL9602](INFO): Powering up
2018-05-21T04:09:58.804Z,1526875798.804 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:09:59.608Z,1526875799.608 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T04:09:59.608Z,1526875799.608 [NAL9602] Data Fault, FailCount= 2
2018-05-21T04:09:59.608Z,1526875799.608 [NAL9602](ERROR): Data Fault
2018-05-21T04:09:59.714Z,1526875799.714 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T04:10:00.003Z,1526875800.003 [NAL9602](INFO): Powering down
2018-05-21T04:10:00.924Z,1526875800.924 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T04:10:00.924Z,1526875800.924 [NAL9602] No Fault, FailCount= 2
2018-05-21T04:10:30.008Z,1526875830.008 [NAL9602](INFO): Powering up NAL9602
2018-05-21T04:10:41.204Z,1526875841.204 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:11:07.840Z,1526875867.840 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:11:07.840Z,1526875867.840 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T04:11:07.840Z,1526875867.840 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:11:07.861Z,1526875867.861 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:11:08.269Z,1526875868.269 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:11:08.269Z,1526875868.269 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T04:11:08.635Z,1526875868.635 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:11:08.636Z,1526875868.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:11:08.636Z,1526875868.636 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:14:08.728Z,1526876048.728 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:14:08.728Z,1526876048.728 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T04:14:08.728Z,1526876048.728 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:14:08.740Z,1526876048.740 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:14:09.141Z,1526876049.141 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:14:09.141Z,1526876049.141 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T04:14:09.527Z,1526876049.527 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:14:09.527Z,1526876049.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:14:09.527Z,1526876049.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:14:25.534Z,1526876065.534 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T04:14:47.448Z,1526876087.448 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T04:14:47.448Z,1526876087.448 [BPC1] Communications Fault, FailCount= 7
2018-05-21T04:14:47.449Z,1526876087.449 [BPC1](ERROR): Communications Fault
2018-05-21T04:14:47.462Z,1526876087.462 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T04:09:47.1Z
2018-05-21T04:14:47.463Z,1526876087.463 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T04:14:47.463Z,1526876087.463 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T04:14:47.473Z,1526876087.473 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T04:14:48.376Z,1526876088.376 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T04:14:48.376Z,1526876088.376 [BPC1] No Fault, FailCount= 7
2018-05-21T04:14:52.290Z,1526876092.290 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0078.lzma
2018-05-21T04:14:53.092Z,1526876093.092 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0078.lzma.bak
2018-05-21T04:14:53.092Z,1526876093.092 [DataOverHttps](INFO): SBD MOMSN=8287865
2018-05-21T04:15:02.110Z,1526876102.110 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0079.lzma
2018-05-21T04:15:02.912Z,1526876102.912 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0079.lzma.bak
2018-05-21T04:15:02.912Z,1526876102.912 [DataOverHttps](INFO): SBD MOMSN=8287867
2018-05-21T04:15:03.591Z,1526876103.591 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T04:15:03.591Z,1526876103.591 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T04:15:03.591Z,1526876103.591 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T04:15:47.776Z,1526876147.776 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T04:16:18.339Z,1526876178.339 [NAL9602](INFO): Powering down
2018-05-21T04:17:09.547Z,1526876229.547 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:17:09.547Z,1526876229.547 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T04:17:09.548Z,1526876229.548 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:17:09.560Z,1526876229.560 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:17:09.961Z,1526876229.961 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:17:09.961Z,1526876229.961 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T04:17:10.347Z,1526876230.347 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:17:10.348Z,1526876230.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:17:10.348Z,1526876230.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:20:03.991Z,1526876403.991 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T04:20:03.991Z,1526876403.991 [Default:CheckIn:C.Wait] Stopped
2018-05-21T04:20:03.991Z,1526876403.991 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T04:20:03.991Z,1526876403.991 [Default:CheckIn:D] Running Loop=1
2018-05-21T04:20:04.397Z,1526876404.397 [Default:CheckIn:D] Stopped
2018-05-21T04:20:04.397Z,1526876404.397 [Default:CheckIn:E] Running Loop=1
2018-05-21T04:20:04.795Z,1526876404.795 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 278.522591 min 
2018-05-21T04:20:04.795Z,1526876404.795 [Default:CheckIn:E] Stopped
2018-05-21T04:20:04.795Z,1526876404.795 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T04:20:04.796Z,1526876404.796 [Default:CheckIn] Stopped
2018-05-21T04:20:04.796Z,1526876404.796 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T04:20:04.796Z,1526876404.796 [Default:CheckIn](INFO): Running loop #28
2018-05-21T04:20:04.796Z,1526876404.796 [Default:CheckIn] Running Loop=28
2018-05-21T04:20:04.796Z,1526876404.796 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T04:20:04.796Z,1526876404.796 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T04:20:08.293Z,1526876408.293 [NAL9602](INFO): Powering up
2018-05-21T04:20:10.423Z,1526876410.423 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:20:10.423Z,1526876410.423 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T04:20:10.423Z,1526876410.423 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:20:10.436Z,1526876410.436 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:20:10.862Z,1526876410.862 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:20:10.862Z,1526876410.862 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T04:20:11.231Z,1526876411.231 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:20:11.231Z,1526876411.231 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:20:11.232Z,1526876411.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:20:19.176Z,1526876419.176 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:20:51.176Z,1526876451.176 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T04:20:51.250Z,1526876451.250 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T04:20:51.250Z,1526876451.250 [NAL9602] Data Fault, FailCount= 3
2018-05-21T04:20:51.250Z,1526876451.250 [NAL9602](ERROR): Data Fault
2018-05-21T04:20:51.337Z,1526876451.337 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T04:20:51.575Z,1526876451.575 [NAL9602](INFO): Powering down
2018-05-21T04:20:52.430Z,1526876452.430 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T04:20:52.430Z,1526876452.430 [NAL9602] No Fault, FailCount= 3
2018-05-21T04:21:21.580Z,1526876481.579 [NAL9602](INFO): Powering up NAL9602
2018-05-21T04:21:32.780Z,1526876492.780 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:21:33.580Z,1526876493.580 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T04:21:33.580Z,1526876493.580 [NAL9602] Data Fault, FailCount= 4
2018-05-21T04:21:33.580Z,1526876493.580 [NAL9602](ERROR): Data Fault
2018-05-21T04:21:33.667Z,1526876493.667 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T04:21:33.984Z,1526876493.984 [NAL9602](INFO): Powering down
2018-05-21T04:21:34.845Z,1526876494.845 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T04:21:34.845Z,1526876494.845 [NAL9602] No Fault, FailCount= 4
2018-05-21T04:21:40.810Z,1526876500.810 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T04:21:40.811Z,1526876500.811 [BPC1] Communications Fault, FailCount= 8
2018-05-21T04:21:40.811Z,1526876500.811 [BPC1](ERROR): Communications Fault
2018-05-21T04:21:40.863Z,1526876500.863 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T04:21:42.040Z,1526876502.040 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T04:21:42.040Z,1526876502.040 [BPC1] No Fault, FailCount= 8
2018-05-21T04:22:04.380Z,1526876524.380 [NAL9602](INFO): Powering up NAL9602
2018-05-21T04:22:15.572Z,1526876535.572 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:23:11.265Z,1526876591.265 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:23:11.265Z,1526876591.265 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T04:23:11.265Z,1526876591.265 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:23:11.278Z,1526876591.278 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:23:11.680Z,1526876591.680 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:23:11.680Z,1526876591.680 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T04:23:12.067Z,1526876592.067 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:23:12.067Z,1526876592.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:23:12.067Z,1526876592.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:24:25.649Z,1526876665.649 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T04:25:04.860Z,1526876704.860 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T04:20:04.8Z
2018-05-21T04:25:04.860Z,1526876704.860 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T04:25:04.860Z,1526876704.860 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T04:25:10.364Z,1526876710.364 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0081.lzma
2018-05-21T04:25:11.148Z,1526876711.148 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0081.lzma.bak
2018-05-21T04:25:11.148Z,1526876711.148 [DataOverHttps](INFO): SBD MOMSN=8287872
2018-05-21T04:25:24.921Z,1526876724.921 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T04:25:25.018Z,1526876725.018 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180520T234132/Express0082.lzma
2018-05-21T04:25:25.820Z,1526876725.820 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0082.lzma.bak
2018-05-21T04:25:25.820Z,1526876725.820 [DataOverHttps](INFO): SBD MOMSN=8287874
2018-05-21T04:25:26.514Z,1526876726.514 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T04:25:26.514Z,1526876726.514 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T04:25:26.514Z,1526876726.514 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T04:25:55.391Z,1526876755.391 [NAL9602](INFO): Powering down
2018-05-21T04:26:12.237Z,1526876772.237 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:26:12.237Z,1526876772.237 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T04:26:12.237Z,1526876772.237 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:26:12.250Z,1526876772.250 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:26:12.656Z,1526876772.656 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:26:12.657Z,1526876772.657 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T04:26:13.038Z,1526876773.038 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:26:13.050Z,1526876773.050 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:26:13.051Z,1526876773.051 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:28:21.506Z,1526876901.506 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T04:28:21.507Z,1526876901.507 [BPC1] Communications Fault, FailCount= 9
2018-05-21T04:28:21.507Z,1526876901.507 [BPC1](ERROR): Communications Fault
2018-05-21T04:28:21.531Z,1526876901.531 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T04:28:22.729Z,1526876902.729 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T04:28:22.729Z,1526876902.729 [BPC1] No Fault, FailCount= 9
2018-05-21T04:29:13.271Z,1526876953.271 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:29:13.272Z,1526876953.272 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T04:29:13.272Z,1526876953.272 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:29:13.315Z,1526876953.315 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:29:13.684Z,1526876953.684 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:29:13.684Z,1526876953.684 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T04:29:14.076Z,1526876954.076 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:29:14.077Z,1526876954.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:29:14.077Z,1526876954.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:30:26.937Z,1526877026.937 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T04:30:26.937Z,1526877026.937 [Default:CheckIn:C.Wait] Stopped
2018-05-21T04:30:26.937Z,1526877026.937 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T04:30:26.937Z,1526877026.937 [Default:CheckIn:D] Running Loop=1
2018-05-21T04:30:27.328Z,1526877027.328 [Default:CheckIn:D] Stopped
2018-05-21T04:30:27.328Z,1526877027.328 [Default:CheckIn:E] Running Loop=1
2018-05-21T04:30:30.545Z,1526877030.545 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 288.904785 min 
2018-05-21T04:30:30.545Z,1526877030.545 [Default:CheckIn:E] Stopped
2018-05-21T04:30:30.545Z,1526877030.545 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T04:30:30.546Z,1526877030.546 [Default:CheckIn] Stopped
2018-05-21T04:30:30.546Z,1526877030.546 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T04:30:30.546Z,1526877030.546 [Default:CheckIn](INFO): Running loop #29
2018-05-21T04:30:30.550Z,1526877030.550 [Default:CheckIn] Running Loop=29
2018-05-21T04:30:30.550Z,1526877030.550 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T04:30:30.550Z,1526877030.550 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T04:30:30.999Z,1526877030.999 [NAL9602](INFO): Powering up
2018-05-21T04:30:42.199Z,1526877042.199 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:31:14.208Z,1526877074.208 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T04:31:14.290Z,1526877074.290 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T04:31:14.290Z,1526877074.290 [NAL9602] Data Fault, FailCount= 5
2018-05-21T04:31:14.290Z,1526877074.290 [NAL9602](ERROR): Data Fault
2018-05-21T04:31:14.387Z,1526877074.387 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T04:31:14.387Z,1526877074.387 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T04:31:14.599Z,1526877074.599 [NAL9602](INFO): Powering down
2018-05-21T04:31:14.668Z,1526877074.668 [CBIT](INFO): Critical error at 20180521T043114
2018-05-21T04:32:14.401Z,1526877134.401 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:32:14.401Z,1526877134.401 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T04:32:14.401Z,1526877134.401 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:32:14.430Z,1526877134.430 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:32:14.859Z,1526877134.859 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:32:14.859Z,1526877134.859 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T04:32:15.234Z,1526877135.234 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:32:15.235Z,1526877135.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:32:15.235Z,1526877135.235 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:33:14.456Z,1526877194.456 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T04:33:14.456Z,1526877194.456 [NAL9602] No Fault, FailCount= 5
2018-05-21T04:33:14.776Z,1526877194.776 [NAL9602](INFO): Powering up NAL9602
2018-05-21T04:33:25.976Z,1526877205.976 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:33:26.775Z,1526877206.775 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T04:33:26.776Z,1526877206.776 [NAL9602] Data Fault, FailCount= 1
2018-05-21T04:33:26.776Z,1526877206.776 [NAL9602](ERROR): Data Fault
2018-05-21T04:33:26.843Z,1526877206.843 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T04:33:27.175Z,1526877207.175 [NAL9602](INFO): Powering down
2018-05-21T04:33:30.758Z,1526877210.758 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T04:33:30.758Z,1526877210.758 [NAL9602] No Fault, FailCount= 1
2018-05-21T04:33:57.178Z,1526877237.178 [NAL9602](INFO): Powering up NAL9602
2018-05-21T04:34:08.372Z,1526877248.372 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:34:26.034Z,1526877266.034 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T04:34:59.351Z,1526877299.351 [CBIT](IMPORTANT): Beginning ground fault scan
2018-05-21T04:35:10.224Z,1526877310.224 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.010499
CHAN A1 (24V): -0.003653
CHAN A2 (12V): -0.002359
CHAN A3 (5V): -0.001281
CHAN B0 (3.3V): 0.000087
CHAN B1 (3.15aV): -0.000096
CHAN B2 (3.15bV): -0.000031
CHAN B3 (GND): -0.000097
OPEN: -0.000420
Full Scale Calc: 4.765 mA, -1.589 mA
2018-05-21T04:35:15.398Z,1526877315.398 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:35:15.399Z,1526877315.399 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T04:35:15.399Z,1526877315.399 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:35:15.465Z,1526877315.465 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:35:15.798Z,1526877315.798 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:35:15.798Z,1526877315.798 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T04:35:16.189Z,1526877316.189 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:35:16.189Z,1526877316.189 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:35:16.190Z,1526877316.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:35:31.453Z,1526877331.453 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T04:30:30.6Z
2018-05-21T04:35:31.453Z,1526877331.453 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T04:35:31.453Z,1526877331.453 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T04:35:36.395Z,1526877336.395 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0084.lzma
2018-05-21T04:35:37.180Z,1526877337.180 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0084.lzma.bak
2018-05-21T04:35:37.180Z,1526877337.180 [DataOverHttps](INFO): SBD MOMSN=8287880
2018-05-21T04:35:45.895Z,1526877345.895 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T04:35:45.997Z,1526877345.997 [DataOverHttps](INFO): Sending 435 bytes from file Logs/20180520T234132/Express0085.lzma
2018-05-21T04:35:46.788Z,1526877346.788 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0085.lzma.bak
2018-05-21T04:35:46.788Z,1526877346.788 [DataOverHttps](INFO): SBD MOMSN=8287883
2018-05-21T04:35:47.597Z,1526877347.597 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T04:35:47.597Z,1526877347.597 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T04:35:47.597Z,1526877347.597 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T04:36:16.084Z,1526877376.084 [NAL9602](INFO): Powering down
2018-05-21T04:38:16.501Z,1526877496.501 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:38:16.501Z,1526877496.501 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T04:38:16.501Z,1526877496.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:38:16.513Z,1526877496.513 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:38:16.514Z,1526877496.514 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:39:24.511Z,1526877564.511 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T04:39:24.511Z,1526877564.511 [BPC1] Communications Fault, FailCount= 10
2018-05-21T04:39:24.511Z,1526877564.511 [BPC1](ERROR): Communications Fault
2018-05-21T04:39:24.535Z,1526877564.535 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T04:39:24.535Z,1526877564.535 [CBIT](CRITICAL): Communications Fault in component: BPC1
2018-05-21T04:39:24.936Z,1526877564.936 [CBIT](INFO): Critical error at 20180521T043924
2018-05-21T04:40:47.896Z,1526877647.896 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T04:40:47.896Z,1526877647.896 [Default:CheckIn:C.Wait] Stopped
2018-05-21T04:40:47.896Z,1526877647.896 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T04:40:47.896Z,1526877647.897 [Default:CheckIn:D] Running Loop=1
2018-05-21T04:40:48.288Z,1526877648.288 [Default:CheckIn:D] Stopped
2018-05-21T04:40:48.288Z,1526877648.288 [Default:CheckIn:E] Running Loop=1
2018-05-21T04:40:48.689Z,1526877648.689 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 299.254102 min 
2018-05-21T04:40:48.690Z,1526877648.690 [Default:CheckIn:E] Stopped
2018-05-21T04:40:48.690Z,1526877648.690 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T04:40:48.690Z,1526877648.690 [Default:CheckIn] Stopped
2018-05-21T04:40:48.690Z,1526877648.690 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T04:40:48.690Z,1526877648.690 [Default:CheckIn](INFO): Running loop #30
2018-05-21T04:40:48.691Z,1526877648.691 [Default:CheckIn] Running Loop=30
2018-05-21T04:40:48.691Z,1526877648.691 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T04:40:48.691Z,1526877648.691 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T04:40:52.209Z,1526877652.209 [NAL9602](INFO): Powering up
2018-05-21T04:41:03.112Z,1526877663.112 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:41:35.112Z,1526877695.112 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T04:41:35.186Z,1526877695.186 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T04:41:35.186Z,1526877695.186 [NAL9602] Data Fault, FailCount= 2
2018-05-21T04:41:35.186Z,1526877695.186 [NAL9602](ERROR): Data Fault
2018-05-21T04:41:35.263Z,1526877695.263 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T04:41:35.511Z,1526877695.511 [NAL9602](INFO): Powering down
2018-05-21T04:41:36.372Z,1526877696.372 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T04:41:36.372Z,1526877696.372 [NAL9602] No Fault, FailCount= 2
2018-05-21T04:42:05.892Z,1526877725.892 [NAL9602](INFO): Powering up NAL9602
2018-05-21T04:42:17.092Z,1526877737.092 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:44:24.857Z,1526877864.857 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T04:44:24.857Z,1526877864.857 [BPC1] No Fault, FailCount= 10
2018-05-21T04:44:26.069Z,1526877866.069 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T04:45:01.993Z,1526877901.993 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T04:45:01.993Z,1526877901.993 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T04:45:48.848Z,1526877948.848 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T04:40:48.7Z
2018-05-21T04:45:48.848Z,1526877948.848 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T04:45:48.848Z,1526877948.848 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T04:45:53.357Z,1526877953.357 [DataOverHttps](INFO): Sending 75 bytes from file Logs/20180520T234132/Courier0087.lzma
2018-05-21T04:45:54.156Z,1526877954.156 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0087.lzma.bak
2018-05-21T04:45:54.156Z,1526877954.156 [DataOverHttps](INFO): SBD MOMSN=8287891
2018-05-21T04:46:03.148Z,1526877963.148 [DataOverHttps](INFO): Sending 296 bytes from file Logs/20180520T234132/Express0088.lzma
2018-05-21T04:46:03.940Z,1526877963.940 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0088.lzma.bak
2018-05-21T04:46:03.940Z,1526877963.940 [DataOverHttps](INFO): SBD MOMSN=8287894
2018-05-21T04:46:04.641Z,1526877964.641 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T04:46:04.641Z,1526877964.641 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T04:46:04.641Z,1526877964.641 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T04:46:07.855Z,1526877967.855 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T04:46:38.387Z,1526877998.387 [NAL9602](INFO): Powering down
2018-05-21T04:51:05.117Z,1526878265.117 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T04:51:05.117Z,1526878265.117 [Default:CheckIn:C.Wait] Stopped
2018-05-21T04:51:05.117Z,1526878265.117 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T04:51:05.117Z,1526878265.117 [Default:CheckIn:D] Running Loop=1
2018-05-21T04:51:05.517Z,1526878265.517 [Default:CheckIn:D] Stopped
2018-05-21T04:51:05.517Z,1526878265.517 [Default:CheckIn:E] Running Loop=1
2018-05-21T04:51:05.918Z,1526878265.918 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 309.541276 min 
2018-05-21T04:51:05.918Z,1526878265.918 [Default:CheckIn:E] Stopped
2018-05-21T04:51:05.918Z,1526878265.918 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T04:51:05.918Z,1526878265.918 [Default:CheckIn] Stopped
2018-05-21T04:51:05.918Z,1526878265.918 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T04:51:05.918Z,1526878265.918 [Default:CheckIn](INFO): Running loop #31
2018-05-21T04:51:05.918Z,1526878265.918 [Default:CheckIn] Running Loop=31
2018-05-21T04:51:05.919Z,1526878265.919 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T04:51:05.919Z,1526878265.919 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T04:51:09.521Z,1526878269.521 [NAL9602](INFO): Powering up
2018-05-21T04:51:20.392Z,1526878280.392 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:51:21.192Z,1526878281.192 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T04:51:21.192Z,1526878281.192 [NAL9602] Data Fault, FailCount= 3
2018-05-21T04:51:21.192Z,1526878281.192 [NAL9602](ERROR): Data Fault
2018-05-21T04:51:21.303Z,1526878281.303 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T04:51:21.591Z,1526878281.591 [NAL9602](INFO): Powering down
2018-05-21T04:51:22.452Z,1526878282.452 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T04:51:22.452Z,1526878282.452 [NAL9602] No Fault, FailCount= 3
2018-05-21T04:51:51.991Z,1526878311.991 [NAL9602](INFO): Powering up NAL9602
2018-05-21T04:52:03.191Z,1526878323.191 [NAL9602](INFO): NAL9602 initialized
2018-05-21T04:52:19.797Z,1526878339.797 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T04:52:19.797Z,1526878339.797 [BPC1] Communications Fault, FailCount= 1
2018-05-21T04:52:19.797Z,1526878339.797 [BPC1](ERROR): Communications Fault
2018-05-21T04:52:19.826Z,1526878339.826 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T04:52:21.025Z,1526878341.025 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T04:52:21.026Z,1526878341.026 [BPC1] No Fault, FailCount= 1
2018-05-21T04:53:16.622Z,1526878396.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:53:16.622Z,1526878396.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T04:53:17.016Z,1526878397.016 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:53:17.017Z,1526878397.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:53:17.017Z,1526878397.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:54:25.896Z,1526878465.896 [BPC1](ERROR): Failed to parse Bank A battery data
2018-05-21T04:54:26.335Z,1526878466.335 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T04:56:06.086Z,1526878566.086 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T04:51:05.9Z
2018-05-21T04:56:06.086Z,1526878566.086 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T04:56:06.086Z,1526878566.086 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T04:56:10.459Z,1526878570.459 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0090.lzma
2018-05-21T04:56:11.261Z,1526878571.261 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0090.lzma.bak
2018-05-21T04:56:11.261Z,1526878571.261 [DataOverHttps](INFO): SBD MOMSN=8287900
2018-05-21T04:56:17.081Z,1526878577.081 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:56:17.081Z,1526878577.081 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T04:56:17.082Z,1526878577.082 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:56:17.103Z,1526878577.103 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:56:20.340Z,1526878580.340 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:56:20.340Z,1526878580.340 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T04:56:20.370Z,1526878580.370 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0091.lzma
2018-05-21T04:56:20.470Z,1526878580.470 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:56:20.471Z,1526878580.471 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:56:20.471Z,1526878580.471 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T04:56:21.149Z,1526878581.149 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0091.lzma.bak
2018-05-21T04:56:21.149Z,1526878581.149 [DataOverHttps](INFO): SBD MOMSN=8287902
2018-05-21T04:56:21.841Z,1526878581.841 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T04:56:21.841Z,1526878581.841 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T04:56:21.841Z,1526878581.841 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T04:57:09.963Z,1526878629.963 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T04:57:40.468Z,1526878660.468 [NAL9602](INFO): Powering down
2018-05-21T04:59:20.707Z,1526878760.707 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T04:59:20.708Z,1526878760.708 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T04:59:20.708Z,1526878760.708 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T04:59:20.720Z,1526878760.720 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T04:59:21.119Z,1526878761.119 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T04:59:21.119Z,1526878761.119 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T04:59:21.510Z,1526878761.510 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T04:59:21.511Z,1526878761.511 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T04:59:21.511Z,1526878761.511 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:01:10.647Z,1526878870.647 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T05:01:10.647Z,1526878870.647 [BPC1] Communications Fault, FailCount= 2
2018-05-21T05:01:10.647Z,1526878870.647 [BPC1](ERROR): Communications Fault
2018-05-21T05:01:10.700Z,1526878870.700 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T05:01:11.877Z,1526878871.877 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T05:01:11.877Z,1526878871.877 [BPC1] No Fault, FailCount= 2
2018-05-21T05:01:22.256Z,1526878882.256 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T05:01:22.256Z,1526878882.256 [Default:CheckIn:C.Wait] Stopped
2018-05-21T05:01:22.256Z,1526878882.256 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T05:01:22.256Z,1526878882.256 [Default:CheckIn:D] Running Loop=1
2018-05-21T05:01:22.658Z,1526878882.658 [Default:CheckIn:D] Stopped
2018-05-21T05:01:22.658Z,1526878882.658 [Default:CheckIn:E] Running Loop=1
2018-05-21T05:01:23.057Z,1526878883.057 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 319.826953 min 
2018-05-21T05:01:23.058Z,1526878883.058 [Default:CheckIn:E] Stopped
2018-05-21T05:01:23.058Z,1526878883.058 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T05:01:23.058Z,1526878883.058 [Default:CheckIn] Stopped
2018-05-21T05:01:23.058Z,1526878883.058 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T05:01:23.058Z,1526878883.058 [Default:CheckIn](INFO): Running loop #32
2018-05-21T05:01:23.058Z,1526878883.058 [Default:CheckIn] Running Loop=32
2018-05-21T05:01:23.058Z,1526878883.058 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T05:01:23.059Z,1526878883.059 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T05:01:26.645Z,1526878886.645 [NAL9602](INFO): Powering up
2018-05-21T05:01:37.548Z,1526878897.548 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:02:09.548Z,1526878929.548 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T05:02:09.626Z,1526878929.626 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T05:02:09.626Z,1526878929.626 [NAL9602] Data Fault, FailCount= 4
2018-05-21T05:02:09.626Z,1526878929.626 [NAL9602](ERROR): Data Fault
2018-05-21T05:02:09.700Z,1526878929.700 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T05:02:09.955Z,1526878929.955 [NAL9602](INFO): Powering down
2018-05-21T05:02:10.849Z,1526878930.849 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T05:02:10.849Z,1526878930.849 [NAL9602] No Fault, FailCount= 4
2018-05-21T05:02:21.596Z,1526878941.596 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:02:21.596Z,1526878941.596 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T05:02:21.596Z,1526878941.596 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:02:21.625Z,1526878941.625 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:02:22.008Z,1526878942.008 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:02:22.008Z,1526878942.008 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T05:02:22.388Z,1526878942.388 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:02:22.388Z,1526878942.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:02:22.389Z,1526878942.389 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:02:39.963Z,1526878959.963 [NAL9602](INFO): Powering up NAL9602
2018-05-21T05:02:51.164Z,1526878971.164 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:02:51.964Z,1526878971.964 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T05:02:51.964Z,1526878971.964 [NAL9602] Data Fault, FailCount= 5
2018-05-21T05:02:51.964Z,1526878971.964 [NAL9602](ERROR): Data Fault
2018-05-21T05:02:52.060Z,1526878972.060 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T05:02:52.060Z,1526878972.060 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T05:02:52.363Z,1526878972.363 [NAL9602](INFO): Powering down
2018-05-21T05:02:52.443Z,1526878972.443 [CBIT](INFO): Critical error at 20180521T050252
2018-05-21T05:04:26.830Z,1526879066.830 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T05:04:46.086Z,1526879086.086 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.399081 seconds old.
2018-05-21T05:04:46.088Z,1526879086.088 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.399678 seconds old.
2018-05-21T05:04:46.488Z,1526879086.488 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.801264 seconds old.
2018-05-21T05:04:46.490Z,1526879086.490 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.801657 seconds old.
2018-05-21T05:04:46.884Z,1526879086.884 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.197296 seconds old.
2018-05-21T05:04:46.886Z,1526879086.886 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.197658 seconds old.
2018-05-21T05:04:47.296Z,1526879087.296 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.609603 seconds old.
2018-05-21T05:04:47.307Z,1526879087.307 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.618223 seconds old.
2018-05-21T05:04:47.694Z,1526879087.694 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.006829 seconds old.
2018-05-21T05:04:47.696Z,1526879087.696 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.007282 seconds old.
2018-05-21T05:04:48.095Z,1526879088.095 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.408103 seconds old.
2018-05-21T05:04:48.097Z,1526879088.097 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.408479 seconds old.
2018-05-21T05:04:48.492Z,1526879088.492 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.805040 seconds old.
2018-05-21T05:04:48.494Z,1526879088.494 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.805416 seconds old.
2018-05-21T05:04:48.894Z,1526879088.894 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.207357 seconds old.
2018-05-21T05:04:48.896Z,1526879088.896 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.207798 seconds old.
2018-05-21T05:04:49.296Z,1526879089.296 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.609036 seconds old.
2018-05-21T05:04:49.298Z,1526879089.298 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.609410 seconds old.
2018-05-21T05:04:49.692Z,1526879089.692 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.005594 seconds old.
2018-05-21T05:04:49.695Z,1526879089.695 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.006167 seconds old.
2018-05-21T05:04:50.100Z,1526879090.100 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.413311 seconds old.
2018-05-21T05:04:50.102Z,1526879090.102 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.413694 seconds old.
2018-05-21T05:04:50.500Z,1526879090.500 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.791308 seconds old.
2018-05-21T05:04:50.502Z,1526879090.502 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.813400 seconds old.
2018-05-21T05:04:50.887Z,1526879090.887 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.200036 seconds old.
2018-05-21T05:04:50.889Z,1526879090.889 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.200450 seconds old.
2018-05-21T05:04:51.281Z,1526879091.281 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.593748 seconds old.
2018-05-21T05:04:51.311Z,1526879091.311 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.622200 seconds old.
2018-05-21T05:04:51.705Z,1526879091.705 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.018072 seconds old.
2018-05-21T05:04:51.707Z,1526879091.707 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.018562 seconds old.
2018-05-21T05:04:52.078Z,1526879092.078 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.391367 seconds old.
2018-05-21T05:04:52.080Z,1526879092.080 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.391999 seconds old.
2018-05-21T05:04:52.109Z,1526879092.109 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T05:04:52.109Z,1526879092.109 [NAL9602] No Fault, FailCount= 5
2018-05-21T05:04:52.444Z,1526879092.444 [NAL9602](INFO): Powering up NAL9602
2018-05-21T05:04:52.480Z,1526879092.480 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.793413 seconds old.
2018-05-21T05:04:52.482Z,1526879092.482 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.793780 seconds old.
2018-05-21T05:04:52.883Z,1526879092.883 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.196155 seconds old.
2018-05-21T05:04:52.885Z,1526879092.885 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.196525 seconds old.
2018-05-21T05:04:53.279Z,1526879093.279 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.592306 seconds old.
2018-05-21T05:04:53.281Z,1526879093.281 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.592677 seconds old.
2018-05-21T05:04:53.688Z,1526879093.688 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.001284 seconds old.
2018-05-21T05:04:53.690Z,1526879093.690 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.001677 seconds old.
2018-05-21T05:04:54.081Z,1526879094.081 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.394710 seconds old.
2018-05-21T05:04:54.084Z,1526879094.084 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.395470 seconds old.
2018-05-21T05:04:54.488Z,1526879094.488 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.801528 seconds old.
2018-05-21T05:04:54.491Z,1526879094.491 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.802090 seconds old.
2018-05-21T05:04:54.888Z,1526879094.888 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.201255 seconds old.
2018-05-21T05:04:54.890Z,1526879094.890 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.201629 seconds old.
2018-05-21T05:04:55.284Z,1526879095.284 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.596772 seconds old.
2018-05-21T05:04:55.286Z,1526879095.286 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.597150 seconds old.
2018-05-21T05:04:55.684Z,1526879095.684 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.997726 seconds old.
2018-05-21T05:04:55.687Z,1526879095.687 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.998310 seconds old.
2018-05-21T05:04:56.096Z,1526879096.096 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.409667 seconds old.
2018-05-21T05:04:56.099Z,1526879096.099 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.410158 seconds old.
2018-05-21T05:04:56.488Z,1526879096.488 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.801251 seconds old.
2018-05-21T05:04:56.490Z,1526879096.490 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.801638 seconds old.
2018-05-21T05:04:56.884Z,1526879096.884 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.197388 seconds old.
2018-05-21T05:04:56.886Z,1526879096.886 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.197949 seconds old.
2018-05-21T05:04:57.288Z,1526879097.288 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.601690 seconds old.
2018-05-21T05:04:57.291Z,1526879097.291 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.602184 seconds old.
2018-05-21T05:04:57.685Z,1526879097.685 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.998074 seconds old.
2018-05-21T05:04:57.687Z,1526879097.687 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.998566 seconds old.
2018-05-21T05:04:58.082Z,1526879098.082 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.395179 seconds old.
2018-05-21T05:04:58.084Z,1526879098.084 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.396016 seconds old.
2018-05-21T05:04:58.496Z,1526879098.496 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.809238 seconds old.
2018-05-21T05:04:58.498Z,1526879098.498 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.809648 seconds old.
2018-05-21T05:04:58.883Z,1526879098.883 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.196438 seconds old.
2018-05-21T05:04:58.885Z,1526879098.885 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.196862 seconds old.
2018-05-21T05:04:59.283Z,1526879099.283 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.596071 seconds old.
2018-05-21T05:04:59.285Z,1526879099.285 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.596492 seconds old.
2018-05-21T05:04:59.687Z,1526879099.687 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.999931 seconds old.
2018-05-21T05:04:59.689Z,1526879099.689 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.000370 seconds old.
2018-05-21T05:05:00.099Z,1526879100.099 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.411806 seconds old.
2018-05-21T05:05:00.101Z,1526879100.101 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.412238 seconds old.
2018-05-21T05:05:00.498Z,1526879100.498 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.807213 seconds old.
2018-05-21T05:05:00.500Z,1526879100.500 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.811865 seconds old.
2018-05-21T05:05:00.897Z,1526879100.897 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.209730 seconds old.
2018-05-21T05:05:00.903Z,1526879100.903 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.214352 seconds old.
2018-05-21T05:05:01.279Z,1526879101.279 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.592096 seconds old.
2018-05-21T05:05:01.281Z,1526879101.281 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.592508 seconds old.
2018-05-21T05:05:01.681Z,1526879101.681 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.994401 seconds old.
2018-05-21T05:05:01.684Z,1526879101.684 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.995059 seconds old.
2018-05-21T05:05:02.084Z,1526879102.084 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.397651 seconds old.
2018-05-21T05:05:02.087Z,1526879102.087 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.398264 seconds old.
2018-05-21T05:05:02.488Z,1526879102.488 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.800776 seconds old.
2018-05-21T05:05:02.490Z,1526879102.490 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.801181 seconds old.
2018-05-21T05:05:02.882Z,1526879102.882 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.195032 seconds old.
2018-05-21T05:05:02.884Z,1526879102.884 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.195662 seconds old.
2018-05-21T05:05:03.319Z,1526879103.319 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.632392 seconds old.
2018-05-21T05:05:03.321Z,1526879103.321 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.632831 seconds old.
2018-05-21T05:05:03.644Z,1526879103.644 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:05:03.688Z,1526879103.688 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.001036 seconds old.
2018-05-21T05:05:03.690Z,1526879103.690 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.001467 seconds old.
2018-05-21T05:05:04.084Z,1526879104.084 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.397128 seconds old.
2018-05-21T05:05:04.086Z,1526879104.086 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.397543 seconds old.
2018-05-21T05:05:04.491Z,1526879104.491 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.804093 seconds old.
2018-05-21T05:05:04.493Z,1526879104.493 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.804511 seconds old.
2018-05-21T05:05:04.892Z,1526879104.892 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.205630 seconds old.
2018-05-21T05:05:04.895Z,1526879104.895 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.206250 seconds old.
2018-05-21T05:05:05.302Z,1526879105.302 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.614770 seconds old.
2018-05-21T05:05:05.308Z,1526879105.308 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.619408 seconds old.
2018-05-21T05:05:05.691Z,1526879105.691 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.003923 seconds old.
2018-05-21T05:05:05.693Z,1526879105.693 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.004379 seconds old.
2018-05-21T05:05:06.085Z,1526879106.085 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.398041 seconds old.
2018-05-21T05:05:06.087Z,1526879106.087 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.398700 seconds old.
2018-05-21T05:05:06.492Z,1526879106.492 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.805506 seconds old.
2018-05-21T05:05:06.495Z,1526879106.495 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.806102 seconds old.
2018-05-21T05:05:06.891Z,1526879106.891 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.204015 seconds old.
2018-05-21T05:05:06.893Z,1526879106.893 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.204451 seconds old.
2018-05-21T05:05:07.294Z,1526879107.294 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.607650 seconds old.
2018-05-21T05:05:07.297Z,1526879107.297 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.608124 seconds old.
2018-05-21T05:05:07.696Z,1526879107.696 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.009626 seconds old.
2018-05-21T05:05:07.699Z,1526879107.699 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.010239 seconds old.
2018-05-21T05:05:08.106Z,1526879108.106 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.418963 seconds old.
2018-05-21T05:05:08.108Z,1526879108.108 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.419587 seconds old.
2018-05-21T05:05:08.507Z,1526879108.507 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.819798 seconds old.
2018-05-21T05:05:08.509Z,1526879108.509 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.820246 seconds old.
2018-05-21T05:05:08.933Z,1526879108.933 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.245772 seconds old.
2018-05-21T05:05:08.935Z,1526879108.935 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.246436 seconds old.
2018-05-21T05:05:09.298Z,1526879109.298 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.610881 seconds old.
2018-05-21T05:05:09.301Z,1526879109.301 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.612320 seconds old.
2018-05-21T05:05:09.706Z,1526879109.706 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.018917 seconds old.
2018-05-21T05:05:09.712Z,1526879109.712 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.023740 seconds old.
2018-05-21T05:05:10.100Z,1526879110.100 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.413634 seconds old.
2018-05-21T05:05:10.103Z,1526879110.103 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.414250 seconds old.
2018-05-21T05:05:10.510Z,1526879110.510 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.822863 seconds old.
2018-05-21T05:05:10.543Z,1526879110.543 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.854345 seconds old.
2018-05-21T05:05:10.879Z,1526879110.879 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.191812 seconds old.
2018-05-21T05:05:10.881Z,1526879110.881 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.192263 seconds old.
2018-05-21T05:05:11.288Z,1526879111.288 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.601230 seconds old.
2018-05-21T05:05:11.310Z,1526879111.310 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.601683 seconds old.
2018-05-21T05:05:11.690Z,1526879111.690 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.002819 seconds old.
2018-05-21T05:05:11.692Z,1526879111.692 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.003448 seconds old.
2018-05-21T05:05:12.108Z,1526879112.108 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.420913 seconds old.
2018-05-21T05:05:12.110Z,1526879112.110 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.421336 seconds old.
2018-05-21T05:05:12.504Z,1526879112.504 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.817658 seconds old.
2018-05-21T05:05:12.511Z,1526879112.511 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.822396 seconds old.
2018-05-21T05:05:12.921Z,1526879112.921 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.233926 seconds old.
2018-05-21T05:05:12.927Z,1526879112.927 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.238799 seconds old.
2018-05-21T05:05:13.303Z,1526879113.303 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.615939 seconds old.
2018-05-21T05:05:13.305Z,1526879113.305 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.616374 seconds old.
2018-05-21T05:05:13.704Z,1526879113.704 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.016968 seconds old.
2018-05-21T05:05:13.706Z,1526879113.706 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.017401 seconds old.
2018-05-21T05:05:14.087Z,1526879114.087 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.400277 seconds old.
2018-05-21T05:05:14.089Z,1526879114.089 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.400712 seconds old.
2018-05-21T05:05:14.516Z,1526879114.516 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.828756 seconds old.
2018-05-21T05:05:14.518Z,1526879114.518 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.829195 seconds old.
2018-05-21T05:05:14.901Z,1526879114.901 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.214533 seconds old.
2018-05-21T05:05:14.908Z,1526879114.908 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.219400 seconds old.
2018-05-21T05:05:15.315Z,1526879115.315 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.628143 seconds old.
2018-05-21T05:05:15.317Z,1526879115.317 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.628629 seconds old.
2018-05-21T05:05:15.704Z,1526879115.704 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.017587 seconds old.
2018-05-21T05:05:15.715Z,1526879115.715 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.026294 seconds old.
2018-05-21T05:05:16.104Z,1526879116.104 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.417683 seconds old.
2018-05-21T05:05:16.116Z,1526879116.116 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.427147 seconds old.
2018-05-21T05:05:16.510Z,1526879116.510 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.823115 seconds old.
2018-05-21T05:05:16.516Z,1526879116.516 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.827955 seconds old.
2018-05-21T05:05:16.925Z,1526879116.925 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.237825 seconds old.
2018-05-21T05:05:16.935Z,1526879116.935 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.246640 seconds old.
2018-05-21T05:05:17.328Z,1526879117.328 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.641701 seconds old.
2018-05-21T05:05:17.339Z,1526879117.339 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.650451 seconds old.
2018-05-21T05:05:17.696Z,1526879117.696 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.009570 seconds old.
2018-05-21T05:05:17.731Z,1526879117.731 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.042344 seconds old.
2018-05-21T05:05:18.121Z,1526879118.121 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.434342 seconds old.
2018-05-21T05:05:18.152Z,1526879118.152 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.463104 seconds old.
2018-05-21T05:05:18.517Z,1526879118.517 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.830682 seconds old.
2018-05-21T05:05:18.544Z,1526879118.544 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.855527 seconds old.
2018-05-21T05:05:18.876Z,1526879118.876 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.188893 seconds old.
2018-05-21T05:05:18.878Z,1526879118.878 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.189297 seconds old.
2018-05-21T05:05:19.279Z,1526879119.279 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.591842 seconds old.
2018-05-21T05:05:19.281Z,1526879119.281 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.592285 seconds old.
2018-05-21T05:05:19.678Z,1526879119.678 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.991371 seconds old.
2018-05-21T05:05:19.680Z,1526879119.680 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.992004 seconds old.
2018-05-21T05:05:20.083Z,1526879120.083 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.396619 seconds old.
2018-05-21T05:05:20.086Z,1526879120.086 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.397034 seconds old.
2018-05-21T05:05:20.484Z,1526879120.484 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.797523 seconds old.
2018-05-21T05:05:20.487Z,1526879120.487 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.798133 seconds old.
2018-05-21T05:05:20.883Z,1526879120.883 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.196453 seconds old.
2018-05-21T05:05:20.885Z,1526879120.885 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.196884 seconds old.
2018-05-21T05:05:21.288Z,1526879121.288 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.601226 seconds old.
2018-05-21T05:05:21.290Z,1526879121.290 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.601650 seconds old.
2018-05-21T05:05:21.686Z,1526879121.686 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.998739 seconds old.
2018-05-21T05:05:21.688Z,1526879121.688 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.999375 seconds old.
2018-05-21T05:05:22.096Z,1526879122.096 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.409492 seconds old.
2018-05-21T05:05:22.111Z,1526879122.111 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.422042 seconds old.
2018-05-21T05:05:22.492Z,1526879122.492 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.805410 seconds old.
2018-05-21T05:05:22.494Z,1526879122.494 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.805889 seconds old.
2018-05-21T05:05:22.495Z,1526879122.495 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:05:22.495Z,1526879122.495 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T05:05:22.495Z,1526879122.495 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:05:22.528Z,1526879122.528 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:05:22.892Z,1526879122.892 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.205294 seconds old.
2018-05-21T05:05:22.919Z,1526879122.919 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:05:22.919Z,1526879122.919 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T05:05:23.292Z,1526879123.292 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.605672 seconds old.
2018-05-21T05:05:23.294Z,1526879123.294 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:05:23.295Z,1526879123.295 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:05:23.295Z,1526879123.295 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:05:23.698Z,1526879123.698 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 38.011223 seconds old.
2018-05-21T05:05:23.700Z,1526879123.700 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 38.011738 seconds old.
2018-05-21T05:05:26.856Z,1526879126.856 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 41.169654 seconds old.
2018-05-21T05:05:26.863Z,1526879126.863 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 41.174241 seconds old.
2018-05-21T05:05:27.016Z,1526879127.016 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 41.329595 seconds old.
2018-05-21T05:05:27.019Z,1526879127.019 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 41.330766 seconds old.
2018-05-21T05:06:23.367Z,1526879183.367 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T05:01:23.1Z
2018-05-21T05:06:23.368Z,1526879183.368 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T05:06:23.368Z,1526879183.368 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T05:06:27.029Z,1526879187.029 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0093.lzma
2018-05-21T05:06:27.828Z,1526879187.828 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0093.lzma.bak
2018-05-21T05:06:27.828Z,1526879187.828 [DataOverHttps](INFO): SBD MOMSN=8287907
2018-05-21T05:06:36.933Z,1526879196.933 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180520T234132/Express0094.lzma
2018-05-21T05:06:37.708Z,1526879197.708 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0094.lzma.bak
2018-05-21T05:06:37.708Z,1526879197.708 [DataOverHttps](INFO): SBD MOMSN=8287910
2018-05-21T05:06:38.393Z,1526879198.393 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T05:06:38.393Z,1526879198.393 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T05:06:38.394Z,1526879198.394 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T05:06:41.623Z,1526879201.623 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T05:07:12.119Z,1526879232.119 [NAL9602](INFO): Powering down
2018-05-21T05:08:17.417Z,1526879297.417 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T05:08:17.417Z,1526879297.417 [BPC1] Communications Fault, FailCount= 3
2018-05-21T05:08:17.417Z,1526879297.417 [BPC1](ERROR): Communications Fault
2018-05-21T05:08:17.441Z,1526879297.441 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T05:08:18.679Z,1526879298.679 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T05:08:18.679Z,1526879298.679 [BPC1] No Fault, FailCount= 3
2018-05-21T05:08:23.429Z,1526879303.429 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:08:23.429Z,1526879303.429 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T05:08:23.429Z,1526879303.429 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:08:23.442Z,1526879303.442 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:08:23.846Z,1526879303.846 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:08:23.846Z,1526879303.846 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T05:08:24.238Z,1526879304.238 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:08:24.238Z,1526879304.238 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:08:24.239Z,1526879304.239 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:11:24.605Z,1526879484.605 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:11:24.605Z,1526879484.605 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T05:11:24.605Z,1526879484.605 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:11:24.618Z,1526879484.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:11:25.022Z,1526879485.022 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:11:25.022Z,1526879485.022 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T05:11:25.407Z,1526879485.407 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:11:25.408Z,1526879485.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:11:25.408Z,1526879485.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:11:38.616Z,1526879498.616 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T05:11:38.617Z,1526879498.617 [Default:CheckIn:C.Wait] Stopped
2018-05-21T05:11:38.617Z,1526879498.617 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T05:11:38.617Z,1526879498.617 [Default:CheckIn:D] Running Loop=1
2018-05-21T05:11:39.009Z,1526879499.009 [Default:CheckIn:D] Stopped
2018-05-21T05:11:39.009Z,1526879499.009 [Default:CheckIn:E] Running Loop=1
2018-05-21T05:11:39.417Z,1526879499.417 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 330.099479 min 
2018-05-21T05:11:39.417Z,1526879499.417 [Default:CheckIn:E] Stopped
2018-05-21T05:11:39.417Z,1526879499.417 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T05:11:39.417Z,1526879499.417 [Default:CheckIn] Stopped
2018-05-21T05:11:39.418Z,1526879499.418 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T05:11:39.418Z,1526879499.418 [Default:CheckIn](INFO): Running loop #33
2018-05-21T05:11:39.418Z,1526879499.418 [Default:CheckIn] Running Loop=33
2018-05-21T05:11:39.418Z,1526879499.418 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T05:11:39.418Z,1526879499.418 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T05:11:42.886Z,1526879502.886 [NAL9602](INFO): Powering up
2018-05-21T05:11:53.744Z,1526879513.744 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:12:25.744Z,1526879545.744 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T05:12:25.822Z,1526879545.822 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T05:12:25.822Z,1526879545.822 [NAL9602] Data Fault, FailCount= 1
2018-05-21T05:12:25.822Z,1526879545.822 [NAL9602](ERROR): Data Fault
2018-05-21T05:12:25.897Z,1526879545.897 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T05:12:26.143Z,1526879546.143 [NAL9602](INFO): Powering down
2018-05-21T05:12:27.025Z,1526879547.025 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T05:12:27.025Z,1526879547.025 [NAL9602] No Fault, FailCount= 1
2018-05-21T05:12:56.208Z,1526879576.208 [NAL9602](INFO): Powering up NAL9602
2018-05-21T05:13:07.407Z,1526879587.407 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:14:25.660Z,1526879665.660 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:14:25.660Z,1526879665.660 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T05:14:25.660Z,1526879665.660 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:14:25.673Z,1526879665.673 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:14:26.075Z,1526879666.075 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:14:26.075Z,1526879666.075 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T05:14:26.495Z,1526879666.495 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:14:26.495Z,1526879666.495 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:14:26.495Z,1526879666.495 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:14:26.874Z,1526879666.874 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T05:16:39.648Z,1526879799.648 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T05:11:39.4Z
2018-05-21T05:16:39.648Z,1526879799.648 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T05:16:39.648Z,1526879799.648 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T05:16:44.315Z,1526879804.315 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180520T234132/Courier0096.lzma
2018-05-21T05:16:45.116Z,1526879805.116 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0096.lzma.bak
2018-05-21T05:16:45.116Z,1526879805.116 [DataOverHttps](INFO): SBD MOMSN=8287916
2018-05-21T05:16:54.059Z,1526879814.059 [DataOverHttps](INFO): Sending 239 bytes from file Logs/20180520T234132/Express0097.lzma
2018-05-21T05:16:54.848Z,1526879814.848 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0097.lzma.bak
2018-05-21T05:16:54.848Z,1526879814.848 [DataOverHttps](INFO): SBD MOMSN=8287918
2018-05-21T05:16:55.557Z,1526879815.557 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T05:16:55.557Z,1526879815.557 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T05:16:55.557Z,1526879815.557 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T05:16:58.824Z,1526879818.824 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T05:17:26.545Z,1526879846.545 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:17:26.545Z,1526879846.545 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T05:17:26.545Z,1526879846.545 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:17:26.571Z,1526879846.571 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:17:26.994Z,1526879846.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:17:26.994Z,1526879846.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T05:17:27.350Z,1526879847.350 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:17:27.351Z,1526879847.351 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:17:27.351Z,1526879847.351 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:17:29.311Z,1526879849.311 [NAL9602](INFO): Powering down
2018-05-21T05:20:27.405Z,1526880027.405 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:20:27.405Z,1526880027.405 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T05:20:27.405Z,1526880027.405 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:20:27.430Z,1526880027.430 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:20:27.818Z,1526880027.818 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:20:27.818Z,1526880027.818 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T05:20:28.199Z,1526880028.199 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:20:28.200Z,1526880028.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:20:28.200Z,1526880028.200 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:21:55.809Z,1526880115.809 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T05:21:55.809Z,1526880115.809 [Default:CheckIn:C.Wait] Stopped
2018-05-21T05:21:55.809Z,1526880115.809 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T05:21:55.809Z,1526880115.809 [Default:CheckIn:D] Running Loop=1
2018-05-21T05:21:56.211Z,1526880116.211 [Default:CheckIn:D] Stopped
2018-05-21T05:21:56.211Z,1526880116.211 [Default:CheckIn:E] Running Loop=1
2018-05-21T05:21:56.617Z,1526880116.617 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 340.386165 min 
2018-05-21T05:21:56.617Z,1526880116.617 [Default:CheckIn:E] Stopped
2018-05-21T05:21:56.618Z,1526880116.618 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T05:21:56.618Z,1526880116.618 [Default:CheckIn] Stopped
2018-05-21T05:21:56.618Z,1526880116.618 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T05:21:56.618Z,1526880116.618 [Default:CheckIn](INFO): Running loop #34
2018-05-21T05:21:56.618Z,1526880116.618 [Default:CheckIn] Running Loop=34
2018-05-21T05:21:56.618Z,1526880116.618 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T05:21:56.618Z,1526880116.618 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T05:21:59.791Z,1526880119.791 [NAL9602](INFO): Powering up
2018-05-21T05:22:10.940Z,1526880130.940 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:22:11.740Z,1526880131.740 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T05:22:11.740Z,1526880131.740 [NAL9602] Data Fault, FailCount= 2
2018-05-21T05:22:11.740Z,1526880131.740 [NAL9602](ERROR): Data Fault
2018-05-21T05:22:11.824Z,1526880131.824 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T05:22:12.139Z,1526880132.139 [NAL9602](INFO): Powering down
2018-05-21T05:22:13.009Z,1526880133.009 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T05:22:13.009Z,1526880133.009 [NAL9602] No Fault, FailCount= 2
2018-05-21T05:22:42.144Z,1526880162.144 [NAL9602](INFO): Powering up NAL9602
2018-05-21T05:22:53.339Z,1526880173.339 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:23:28.203Z,1526880208.203 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:23:28.204Z,1526880208.204 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T05:23:28.204Z,1526880208.204 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:23:28.237Z,1526880208.237 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:23:28.606Z,1526880208.606 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:23:28.606Z,1526880208.606 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T05:23:28.990Z,1526880208.990 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:23:28.991Z,1526880208.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:23:28.991Z,1526880208.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:24:27.084Z,1526880267.084 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T05:26:29.276Z,1526880389.276 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:26:29.276Z,1526880389.276 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T05:26:29.276Z,1526880389.276 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:26:29.289Z,1526880389.289 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:26:29.691Z,1526880389.691 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:26:29.691Z,1526880389.691 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T05:26:30.077Z,1526880390.077 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:26:30.077Z,1526880390.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:26:30.077Z,1526880390.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:26:56.895Z,1526880416.895 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T05:21:56.6Z
2018-05-21T05:26:56.895Z,1526880416.895 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T05:26:56.895Z,1526880416.895 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T05:27:00.897Z,1526880420.897 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0099.lzma
2018-05-21T05:27:01.688Z,1526880421.688 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0099.lzma.bak
2018-05-21T05:27:01.688Z,1526880421.688 [DataOverHttps](INFO): SBD MOMSN=8287923
2018-05-21T05:27:10.710Z,1526880430.710 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0100.lzma
2018-05-21T05:27:11.504Z,1526880431.504 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0100.lzma.bak
2018-05-21T05:27:11.504Z,1526880431.504 [DataOverHttps](INFO): SBD MOMSN=8287925
2018-05-21T05:27:12.208Z,1526880432.208 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T05:27:12.208Z,1526880432.208 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T05:27:12.208Z,1526880432.208 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T05:27:57.168Z,1526880477.168 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T05:28:27.628Z,1526880507.628 [NAL9602](INFO): Powering down
2018-05-21T05:29:30.084Z,1526880570.084 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:29:30.084Z,1526880570.084 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T05:29:30.084Z,1526880570.084 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:29:30.096Z,1526880570.096 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:29:30.497Z,1526880570.497 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:29:30.497Z,1526880570.497 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T05:29:30.884Z,1526880570.884 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:29:30.884Z,1526880570.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:29:30.885Z,1526880570.885 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:32:12.519Z,1526880732.519 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T05:32:12.519Z,1526880732.519 [Default:CheckIn:C.Wait] Stopped
2018-05-21T05:32:12.519Z,1526880732.519 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T05:32:12.519Z,1526880732.519 [Default:CheckIn:D] Running Loop=1
2018-05-21T05:32:12.929Z,1526880732.929 [Default:CheckIn:D] Stopped
2018-05-21T05:32:12.929Z,1526880732.929 [Default:CheckIn:E] Running Loop=1
2018-05-21T05:32:13.329Z,1526880733.329 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 350.664811 min 
2018-05-21T05:32:13.329Z,1526880733.329 [Default:CheckIn:E] Stopped
2018-05-21T05:32:13.329Z,1526880733.329 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T05:32:13.329Z,1526880733.329 [Default:CheckIn] Stopped
2018-05-21T05:32:13.330Z,1526880733.330 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T05:32:13.330Z,1526880733.330 [Default:CheckIn](INFO): Running loop #35
2018-05-21T05:32:13.330Z,1526880733.330 [Default:CheckIn] Running Loop=35
2018-05-21T05:32:13.330Z,1526880733.330 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T05:32:13.330Z,1526880733.330 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T05:32:16.523Z,1526880736.523 [NAL9602](INFO): Powering up
2018-05-21T05:32:27.708Z,1526880747.708 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:32:30.957Z,1526880750.957 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:32:30.957Z,1526880750.957 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T05:32:30.957Z,1526880750.957 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:32:30.969Z,1526880750.969 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:32:31.379Z,1526880751.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:32:31.379Z,1526880751.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T05:32:31.771Z,1526880751.771 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:32:31.771Z,1526880751.771 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:32:31.771Z,1526880751.771 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:34:27.378Z,1526880867.378 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T05:35:31.948Z,1526880931.948 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:35:31.949Z,1526880931.949 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T05:35:31.949Z,1526880931.949 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:35:31.974Z,1526880931.974 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:35:32.370Z,1526880932.370 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:35:32.370Z,1526880932.370 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T05:35:32.755Z,1526880932.755 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:35:32.756Z,1526880932.756 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:35:32.756Z,1526880932.756 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:37:13.577Z,1526881033.577 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T05:32:13.3Z
2018-05-21T05:37:13.577Z,1526881033.577 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T05:37:13.577Z,1526881033.577 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T05:37:17.256Z,1526881037.256 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0102.lzma
2018-05-21T05:37:18.056Z,1526881038.056 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0102.lzma.bak
2018-05-21T05:37:18.056Z,1526881038.056 [DataOverHttps](INFO): SBD MOMSN=8287930
2018-05-21T05:37:27.058Z,1526881047.058 [DataOverHttps](INFO): Sending 199 bytes from file Logs/20180520T234132/Express0103.lzma
2018-05-21T05:37:27.856Z,1526881047.856 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0103.lzma.bak
2018-05-21T05:37:27.856Z,1526881047.856 [DataOverHttps](INFO): SBD MOMSN=8287932
2018-05-21T05:37:28.607Z,1526881048.607 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T05:37:28.607Z,1526881048.607 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T05:37:28.607Z,1526881048.607 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T05:37:31.838Z,1526881051.838 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T05:38:02.351Z,1526881082.351 [NAL9602](INFO): Powering down
2018-05-21T05:38:32.823Z,1526881112.823 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:38:32.823Z,1526881112.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T05:38:32.823Z,1526881112.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:38:32.836Z,1526881112.836 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:38:33.206Z,1526881113.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:38:33.223Z,1526881113.223 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T05:38:33.595Z,1526881113.595 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:38:33.596Z,1526881113.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:38:33.596Z,1526881113.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:41:33.606Z,1526881293.606 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:41:33.607Z,1526881293.607 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T05:41:33.607Z,1526881293.607 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:41:33.619Z,1526881293.619 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:41:34.024Z,1526881294.024 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:41:34.024Z,1526881294.024 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T05:41:34.412Z,1526881294.412 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:41:34.412Z,1526881294.412 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:41:34.413Z,1526881294.413 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:42:28.802Z,1526881348.802 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T05:42:28.802Z,1526881348.802 [Default:CheckIn:C.Wait] Stopped
2018-05-21T05:42:28.802Z,1526881348.802 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T05:42:28.802Z,1526881348.802 [Default:CheckIn:D] Running Loop=1
2018-05-21T05:42:29.220Z,1526881349.220 [Default:CheckIn:D] Stopped
2018-05-21T05:42:29.220Z,1526881349.220 [Default:CheckIn:E] Running Loop=1
2018-05-21T05:42:29.605Z,1526881349.605 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 360.936328 min 
2018-05-21T05:42:29.605Z,1526881349.605 [Default:CheckIn:E] Stopped
2018-05-21T05:42:29.605Z,1526881349.605 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T05:42:29.606Z,1526881349.606 [Default:CheckIn] Stopped
2018-05-21T05:42:29.606Z,1526881349.606 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T05:42:29.606Z,1526881349.606 [Default:CheckIn](INFO): Running loop #36
2018-05-21T05:42:29.606Z,1526881349.606 [Default:CheckIn] Running Loop=36
2018-05-21T05:42:29.606Z,1526881349.606 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T05:42:29.606Z,1526881349.606 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T05:42:33.113Z,1526881353.113 [NAL9602](INFO): Powering up
2018-05-21T05:42:43.984Z,1526881363.984 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:42:44.781Z,1526881364.781 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T05:42:44.781Z,1526881364.781 [NAL9602] Data Fault, FailCount= 3
2018-05-21T05:42:44.781Z,1526881364.781 [NAL9602](ERROR): Data Fault
2018-05-21T05:42:44.864Z,1526881364.864 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T05:42:45.187Z,1526881365.187 [NAL9602](INFO): Powering down
2018-05-21T05:42:46.043Z,1526881366.043 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T05:42:46.043Z,1526881366.043 [NAL9602] No Fault, FailCount= 3
2018-05-21T05:43:15.584Z,1526881395.584 [NAL9602](INFO): Powering up NAL9602
2018-05-21T05:43:26.783Z,1526881406.783 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:44:27.660Z,1526881467.660 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T05:44:34.501Z,1526881474.501 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:44:34.501Z,1526881474.501 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T05:44:34.501Z,1526881474.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:44:34.526Z,1526881474.526 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:44:34.921Z,1526881474.921 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:44:34.921Z,1526881474.921 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T05:44:35.303Z,1526881475.303 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:44:35.304Z,1526881475.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:44:35.304Z,1526881475.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:47:29.857Z,1526881649.857 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T05:42:29.6Z
2018-05-21T05:47:29.858Z,1526881649.858 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T05:47:29.858Z,1526881649.858 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T05:47:33.531Z,1526881653.531 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0105.lzma
2018-05-21T05:47:34.324Z,1526881654.324 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0105.lzma.bak
2018-05-21T05:47:34.324Z,1526881654.324 [DataOverHttps](INFO): SBD MOMSN=8287936
2018-05-21T05:47:38.285Z,1526881658.285 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:47:38.285Z,1526881658.285 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T05:47:38.285Z,1526881658.285 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:47:38.330Z,1526881658.330 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:47:38.505Z,1526881658.505 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:47:38.505Z,1526881658.505 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T05:47:38.831Z,1526881658.831 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:47:38.831Z,1526881658.831 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:47:38.832Z,1526881658.832 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:47:43.237Z,1526881663.237 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0106.lzma
2018-05-21T05:47:44.021Z,1526881664.021 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0106.lzma.bak
2018-05-21T05:47:44.021Z,1526881664.021 [DataOverHttps](INFO): SBD MOMSN=8287938
2018-05-21T05:47:44.714Z,1526881664.714 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T05:47:44.714Z,1526881664.714 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T05:47:44.714Z,1526881664.714 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T05:48:33.288Z,1526881713.288 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T05:49:03.807Z,1526881743.807 [NAL9602](INFO): Powering down
2018-05-21T05:50:39.215Z,1526881839.215 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:50:39.215Z,1526881839.215 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T05:50:39.215Z,1526881839.215 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:50:39.250Z,1526881839.250 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:50:39.665Z,1526881839.665 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T05:50:39.665Z,1526881839.665 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T05:50:40.003Z,1526881840.003 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T05:50:40.003Z,1526881840.003 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T05:50:40.004Z,1526881840.004 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T05:52:44.945Z,1526881964.945 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T05:52:44.945Z,1526881964.945 [Default:CheckIn:C.Wait] Stopped
2018-05-21T05:52:44.945Z,1526881964.945 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T05:52:44.945Z,1526881964.945 [Default:CheckIn:D] Running Loop=1
2018-05-21T05:52:45.350Z,1526881965.350 [Default:CheckIn:D] Stopped
2018-05-21T05:52:45.350Z,1526881965.350 [Default:CheckIn:E] Running Loop=1
2018-05-21T05:52:45.747Z,1526881965.747 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 371.205143 min 
2018-05-21T05:52:45.748Z,1526881965.748 [Default:CheckIn:E] Stopped
2018-05-21T05:52:45.748Z,1526881965.748 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T05:52:45.748Z,1526881965.748 [Default:CheckIn] Stopped
2018-05-21T05:52:45.748Z,1526881965.748 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T05:52:45.748Z,1526881965.748 [Default:CheckIn](INFO): Running loop #37
2018-05-21T05:52:45.748Z,1526881965.748 [Default:CheckIn] Running Loop=37
2018-05-21T05:52:45.748Z,1526881965.748 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T05:52:45.748Z,1526881965.748 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T05:52:49.239Z,1526881969.239 [NAL9602](INFO): Powering up
2018-05-21T05:53:00.140Z,1526881980.140 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:53:32.140Z,1526882012.140 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T05:53:32.218Z,1526882012.218 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T05:53:32.218Z,1526882012.218 [NAL9602] Data Fault, FailCount= 4
2018-05-21T05:53:32.218Z,1526882012.218 [NAL9602](ERROR): Data Fault
2018-05-21T05:53:32.306Z,1526882012.306 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T05:53:32.543Z,1526882012.543 [NAL9602](INFO): Powering down
2018-05-21T05:53:33.401Z,1526882013.401 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T05:53:33.401Z,1526882013.401 [NAL9602] No Fault, FailCount= 4
2018-05-21T05:53:40.183Z,1526882020.183 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T05:53:40.183Z,1526882020.183 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T05:53:40.183Z,1526882020.183 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T05:53:40.239Z,1526882020.239 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:53:40.239Z,1526882020.239 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T05:54:02.551Z,1526882042.551 [NAL9602](INFO): Powering up NAL9602
2018-05-21T05:54:13.351Z,1526882053.351 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:54:14.152Z,1526882054.152 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T05:54:14.152Z,1526882054.152 [NAL9602] Data Fault, FailCount= 5
2018-05-21T05:54:14.152Z,1526882054.152 [NAL9602](ERROR): Data Fault
2018-05-21T05:54:14.231Z,1526882054.231 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T05:54:14.231Z,1526882054.231 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T05:54:14.551Z,1526882054.551 [NAL9602](INFO): Powering down
2018-05-21T05:54:14.627Z,1526882054.627 [CBIT](INFO): Critical error at 20180521T055414
2018-05-21T05:54:27.803Z,1526882067.803 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T05:56:14.236Z,1526882174.236 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T05:56:14.236Z,1526882174.236 [NAL9602] No Fault, FailCount= 5
2018-05-21T05:56:14.575Z,1526882174.575 [NAL9602](INFO): Powering up NAL9602
2018-05-21T05:56:25.776Z,1526882185.776 [NAL9602](INFO): NAL9602 initialized
2018-05-21T05:57:45.947Z,1526882265.947 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T05:52:45.7Z
2018-05-21T05:57:45.947Z,1526882265.947 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T05:57:45.947Z,1526882265.947 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T05:57:49.932Z,1526882269.932 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0108.lzma
2018-05-21T05:57:50.716Z,1526882270.716 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0108.lzma.bak
2018-05-21T05:57:50.717Z,1526882270.717 [DataOverHttps](INFO): SBD MOMSN=8287943
2018-05-21T05:57:59.604Z,1526882279.604 [DataOverHttps](INFO): Sending 310 bytes from file Logs/20180520T234132/Express0109.lzma
2018-05-21T05:58:00.405Z,1526882280.405 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0109.lzma.bak
2018-05-21T05:58:00.405Z,1526882280.405 [DataOverHttps](INFO): SBD MOMSN=8287946
2018-05-21T05:58:01.099Z,1526882281.099 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T05:58:01.099Z,1526882281.099 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T05:58:01.099Z,1526882281.099 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T05:58:04.319Z,1526882284.319 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T05:58:34.824Z,1526882314.824 [NAL9602](INFO): Powering down
2018-05-21T06:03:01.449Z,1526882581.449 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T06:03:01.449Z,1526882581.449 [Default:CheckIn:C.Wait] Stopped
2018-05-21T06:03:01.449Z,1526882581.449 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T06:03:01.449Z,1526882581.449 [Default:CheckIn:D] Running Loop=1
2018-05-21T06:03:01.856Z,1526882581.856 [Default:CheckIn:D] Stopped
2018-05-21T06:03:01.856Z,1526882581.856 [Default:CheckIn:E] Running Loop=1
2018-05-21T06:03:04.963Z,1526882584.963 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 381.480241 min 
2018-05-21T06:03:04.964Z,1526882584.964 [Default:CheckIn:E] Stopped
2018-05-21T06:03:04.964Z,1526882584.964 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T06:03:04.964Z,1526882584.964 [Default:CheckIn] Stopped
2018-05-21T06:03:04.964Z,1526882584.964 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T06:03:04.964Z,1526882584.964 [Default:CheckIn](INFO): Running loop #38
2018-05-21T06:03:04.964Z,1526882584.964 [Default:CheckIn] Running Loop=38
2018-05-21T06:03:04.965Z,1526882584.965 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T06:03:04.965Z,1526882584.965 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T06:03:05.411Z,1526882585.411 [NAL9602](INFO): Powering up
2018-05-21T06:03:16.612Z,1526882596.612 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:03:48.616Z,1526882628.616 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T06:03:48.690Z,1526882628.690 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T06:03:48.690Z,1526882628.690 [NAL9602] Data Fault, FailCount= 1
2018-05-21T06:03:48.690Z,1526882628.690 [NAL9602](ERROR): Data Fault
2018-05-21T06:03:48.778Z,1526882628.778 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T06:03:49.011Z,1526882629.011 [NAL9602](INFO): Powering down
2018-05-21T06:03:49.873Z,1526882629.873 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T06:03:49.873Z,1526882629.873 [NAL9602] No Fault, FailCount= 1
2018-05-21T06:04:19.080Z,1526882659.080 [NAL9602](INFO): Powering up NAL9602
2018-05-21T06:04:27.932Z,1526882667.932 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T06:04:30.280Z,1526882670.280 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:08:05.490Z,1526882885.490 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T06:03:04.0Z
2018-05-21T06:08:05.514Z,1526882885.514 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T06:08:05.514Z,1526882885.514 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T06:08:10.345Z,1526882890.345 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0111.lzma
2018-05-21T06:08:11.144Z,1526882891.144 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0111.lzma.bak
2018-05-21T06:08:11.144Z,1526882891.144 [DataOverHttps](INFO): SBD MOMSN=8287953
2018-05-21T06:08:20.139Z,1526882900.139 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0112.lzma
2018-05-21T06:08:20.540Z,1526882900.540 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T06:08:20.932Z,1526882900.932 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0112.lzma.bak
2018-05-21T06:08:20.932Z,1526882900.932 [DataOverHttps](INFO): SBD MOMSN=8287955
2018-05-21T06:08:21.619Z,1526882901.619 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T06:08:21.619Z,1526882901.619 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T06:08:21.619Z,1526882901.619 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T06:08:40.262Z,1526882920.262 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:08:40.262Z,1526882920.262 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T06:08:40.643Z,1526882920.643 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:08:40.644Z,1526882920.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:08:40.644Z,1526882920.644 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:08:51.003Z,1526882931.003 [NAL9602](INFO): Powering down
2018-05-21T06:11:40.679Z,1526883100.679 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:11:40.679Z,1526883100.679 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T06:11:40.679Z,1526883100.679 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:11:40.724Z,1526883100.724 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:11:41.085Z,1526883101.085 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:11:41.085Z,1526883101.085 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T06:11:41.475Z,1526883101.475 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:11:41.475Z,1526883101.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:11:41.475Z,1526883101.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:13:21.857Z,1526883201.857 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T06:13:21.857Z,1526883201.857 [Default:CheckIn:C.Wait] Stopped
2018-05-21T06:13:21.857Z,1526883201.857 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T06:13:21.857Z,1526883201.857 [Default:CheckIn:D] Running Loop=1
2018-05-21T06:13:22.283Z,1526883202.283 [Default:CheckIn:D] Stopped
2018-05-21T06:13:22.283Z,1526883202.283 [Default:CheckIn:E] Running Loop=1
2018-05-21T06:13:22.693Z,1526883202.693 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 391.820703 min 
2018-05-21T06:13:22.693Z,1526883202.693 [Default:CheckIn:E] Stopped
2018-05-21T06:13:22.694Z,1526883202.694 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T06:13:22.694Z,1526883202.694 [Default:CheckIn] Stopped
2018-05-21T06:13:22.694Z,1526883202.694 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T06:13:22.702Z,1526883202.702 [Default:CheckIn](INFO): Running loop #39
2018-05-21T06:13:22.702Z,1526883202.702 [Default:CheckIn] Running Loop=39
2018-05-21T06:13:22.702Z,1526883202.702 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T06:13:22.703Z,1526883202.703 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T06:13:23.415Z,1526883203.415 [NAL9602](INFO): Powering up
2018-05-21T06:13:34.247Z,1526883214.247 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:13:35.040Z,1526883215.040 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T06:13:35.040Z,1526883215.040 [NAL9602] Data Fault, FailCount= 2
2018-05-21T06:13:35.040Z,1526883215.040 [NAL9602](ERROR): Data Fault
2018-05-21T06:13:35.121Z,1526883215.121 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T06:13:35.439Z,1526883215.439 [NAL9602](INFO): Powering down
2018-05-21T06:13:36.294Z,1526883216.294 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T06:13:36.294Z,1526883216.294 [NAL9602] No Fault, FailCount= 2
2018-05-21T06:14:05.840Z,1526883245.840 [NAL9602](INFO): Powering up NAL9602
2018-05-21T06:14:17.040Z,1526883257.040 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:14:27.940Z,1526883267.940 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T06:14:41.518Z,1526883281.518 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:14:41.518Z,1526883281.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T06:14:41.518Z,1526883281.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:14:41.531Z,1526883281.531 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:14:41.932Z,1526883281.932 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:14:41.932Z,1526883281.932 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T06:14:42.327Z,1526883282.327 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:14:42.327Z,1526883282.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:14:42.328Z,1526883282.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:17:42.438Z,1526883462.438 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:17:42.438Z,1526883462.438 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T06:17:42.438Z,1526883462.438 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:17:42.459Z,1526883462.459 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:17:42.850Z,1526883462.850 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:17:42.850Z,1526883462.850 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T06:17:43.231Z,1526883463.231 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:17:43.232Z,1526883463.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:17:43.232Z,1526883463.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:18:22.837Z,1526883502.837 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T06:13:22.7Z
2018-05-21T06:18:22.837Z,1526883502.837 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T06:18:22.838Z,1526883502.838 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T06:18:26.777Z,1526883506.777 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0114.lzma
2018-05-21T06:18:27.560Z,1526883507.560 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0114.lzma.bak
2018-05-21T06:18:27.560Z,1526883507.560 [DataOverHttps](INFO): SBD MOMSN=8287960
2018-05-21T06:18:36.445Z,1526883516.445 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20180520T234132/Express0115.lzma
2018-05-21T06:18:37.244Z,1526883517.244 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0115.lzma.bak
2018-05-21T06:18:37.244Z,1526883517.244 [DataOverHttps](INFO): SBD MOMSN=8287962
2018-05-21T06:18:37.937Z,1526883517.937 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T06:18:37.937Z,1526883517.937 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T06:18:37.937Z,1526883517.937 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T06:19:20.852Z,1526883560.852 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T06:19:51.635Z,1526883591.635 [NAL9602](INFO): Powering down
2018-05-21T06:20:43.319Z,1526883643.319 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:20:43.319Z,1526883643.319 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T06:20:43.319Z,1526883643.319 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:20:43.354Z,1526883643.354 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:20:43.755Z,1526883643.755 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:20:43.755Z,1526883643.755 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T06:20:44.118Z,1526883644.118 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:20:44.119Z,1526883644.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:20:44.119Z,1526883644.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:23:38.137Z,1526883818.137 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T06:23:38.137Z,1526883818.137 [Default:CheckIn:C.Wait] Stopped
2018-05-21T06:23:38.137Z,1526883818.137 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T06:23:38.138Z,1526883818.138 [Default:CheckIn:D] Running Loop=1
2018-05-21T06:23:38.548Z,1526883818.548 [Default:CheckIn:D] Stopped
2018-05-21T06:23:38.548Z,1526883818.548 [Default:CheckIn:E] Running Loop=1
2018-05-21T06:23:38.929Z,1526883818.929 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 402.091764 min 
2018-05-21T06:23:38.929Z,1526883818.929 [Default:CheckIn:E] Stopped
2018-05-21T06:23:38.930Z,1526883818.930 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T06:23:38.930Z,1526883818.930 [Default:CheckIn] Stopped
2018-05-21T06:23:38.930Z,1526883818.930 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T06:23:38.930Z,1526883818.930 [Default:CheckIn](INFO): Running loop #40
2018-05-21T06:23:38.930Z,1526883818.930 [Default:CheckIn] Running Loop=40
2018-05-21T06:23:38.930Z,1526883818.930 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T06:23:38.931Z,1526883818.931 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T06:23:42.450Z,1526883822.450 [NAL9602](INFO): Powering up
2018-05-21T06:23:44.181Z,1526883824.181 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:23:44.182Z,1526883824.182 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T06:23:44.182Z,1526883824.182 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:23:44.195Z,1526883824.195 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:23:44.609Z,1526883824.609 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:23:44.609Z,1526883824.609 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T06:23:44.972Z,1526883824.972 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:23:44.973Z,1526883824.973 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:23:44.973Z,1526883824.973 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:23:53.323Z,1526883833.323 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:24:25.324Z,1526883865.324 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T06:24:25.406Z,1526883865.406 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T06:24:25.406Z,1526883865.406 [NAL9602] Data Fault, FailCount= 3
2018-05-21T06:24:25.406Z,1526883865.406 [NAL9602](ERROR): Data Fault
2018-05-21T06:24:25.483Z,1526883865.483 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T06:24:25.731Z,1526883865.731 [NAL9602](INFO): Powering down
2018-05-21T06:24:26.582Z,1526883866.582 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T06:24:26.582Z,1526883866.582 [NAL9602] No Fault, FailCount= 3
2018-05-21T06:24:28.201Z,1526883868.201 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T06:24:56.131Z,1526883896.131 [NAL9602](INFO): Powering up NAL9602
2018-05-21T06:25:07.332Z,1526883907.332 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:25:08.168Z,1526883908.168 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T06:25:08.168Z,1526883908.168 [NAL9602] Data Fault, FailCount= 4
2018-05-21T06:25:08.168Z,1526883908.168 [NAL9602](ERROR): Data Fault
2018-05-21T06:25:08.276Z,1526883908.276 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T06:25:08.531Z,1526883908.531 [NAL9602](INFO): Powering down
2018-05-21T06:25:09.481Z,1526883909.481 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T06:25:09.481Z,1526883909.481 [NAL9602] No Fault, FailCount= 4
2018-05-21T06:25:38.932Z,1526883938.932 [NAL9602](INFO): Powering up NAL9602
2018-05-21T06:25:50.119Z,1526883950.119 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:26:45.071Z,1526884005.071 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:26:45.071Z,1526884005.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T06:26:45.071Z,1526884005.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:26:45.115Z,1526884005.115 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:26:45.502Z,1526884005.502 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:26:45.502Z,1526884005.502 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T06:26:45.874Z,1526884005.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:26:45.875Z,1526884005.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:26:45.875Z,1526884005.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:28:39.086Z,1526884119.086 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T06:23:38.9Z
2018-05-21T06:28:39.086Z,1526884119.086 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T06:28:39.086Z,1526884119.086 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T06:28:43.048Z,1526884123.048 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0117.lzma
2018-05-21T06:28:43.816Z,1526884123.816 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0117.lzma.bak
2018-05-21T06:28:43.816Z,1526884123.816 [DataOverHttps](INFO): SBD MOMSN=8287967
2018-05-21T06:28:52.836Z,1526884132.836 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0118.lzma
2018-05-21T06:28:53.636Z,1526884133.636 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0118.lzma.bak
2018-05-21T06:28:53.636Z,1526884133.636 [DataOverHttps](INFO): SBD MOMSN=8287969
2018-05-21T06:28:54.363Z,1526884134.363 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T06:28:54.363Z,1526884134.363 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T06:28:54.363Z,1526884134.363 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T06:28:57.558Z,1526884137.558 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T06:29:28.043Z,1526884168.043 [NAL9602](INFO): Powering down
2018-05-21T06:29:46.091Z,1526884186.091 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:29:46.091Z,1526884186.091 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T06:29:46.091Z,1526884186.091 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:29:46.104Z,1526884186.104 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:29:46.495Z,1526884186.495 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:29:46.495Z,1526884186.495 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T06:29:46.890Z,1526884186.890 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:29:46.891Z,1526884186.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:29:46.891Z,1526884186.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:32:46.908Z,1526884366.908 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:32:46.908Z,1526884366.908 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T06:32:46.908Z,1526884366.908 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:32:46.920Z,1526884366.920 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:32:47.318Z,1526884367.318 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:32:47.318Z,1526884367.318 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T06:32:47.707Z,1526884367.707 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:32:47.708Z,1526884367.708 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:32:47.708Z,1526884367.708 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:33:54.516Z,1526884434.516 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T06:33:54.517Z,1526884434.517 [Default:CheckIn:C.Wait] Stopped
2018-05-21T06:33:54.517Z,1526884434.517 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T06:33:54.517Z,1526884434.517 [Default:CheckIn:D] Running Loop=1
2018-05-21T06:33:54.917Z,1526884434.917 [Default:CheckIn:D] Stopped
2018-05-21T06:33:54.917Z,1526884434.917 [Default:CheckIn:E] Running Loop=1
2018-05-21T06:33:55.311Z,1526884435.311 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 412.364583 min 
2018-05-21T06:33:55.312Z,1526884435.312 [Default:CheckIn:E] Stopped
2018-05-21T06:33:55.312Z,1526884435.312 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T06:33:55.312Z,1526884435.312 [Default:CheckIn] Stopped
2018-05-21T06:33:55.312Z,1526884435.312 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T06:33:55.312Z,1526884435.312 [Default:CheckIn](INFO): Running loop #41
2018-05-21T06:33:55.312Z,1526884435.312 [Default:CheckIn] Running Loop=41
2018-05-21T06:33:55.312Z,1526884435.312 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T06:33:55.312Z,1526884435.312 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T06:33:56.067Z,1526884436.067 [NAL9602](INFO): Powering up
2018-05-21T06:34:06.940Z,1526884446.940 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:34:28.207Z,1526884468.207 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T06:35:47.829Z,1526884547.829 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:35:47.830Z,1526884547.830 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T06:35:47.830Z,1526884547.830 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:35:47.843Z,1526884547.843 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:35:48.229Z,1526884548.229 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:35:48.229Z,1526884548.229 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T06:35:48.595Z,1526884548.595 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:35:48.596Z,1526884548.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:35:48.596Z,1526884548.596 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:38:48.747Z,1526884728.747 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:38:48.747Z,1526884728.747 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T06:38:48.747Z,1526884728.747 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:38:48.772Z,1526884728.772 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:38:49.161Z,1526884729.161 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:38:49.162Z,1526884729.161 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T06:38:49.546Z,1526884729.546 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:38:49.547Z,1526884729.547 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:38:49.547Z,1526884729.547 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:38:55.556Z,1526884735.556 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T06:33:55.3Z
2018-05-21T06:38:55.556Z,1526884735.556 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T06:38:55.556Z,1526884735.556 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T06:38:59.481Z,1526884739.481 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0120.lzma
2018-05-21T06:39:00.280Z,1526884740.280 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0120.lzma.bak
2018-05-21T06:39:00.280Z,1526884740.280 [DataOverHttps](INFO): SBD MOMSN=8287975
2018-05-21T06:39:09.266Z,1526884749.266 [DataOverHttps](INFO): Sending 200 bytes from file Logs/20180520T234132/Express0121.lzma
2018-05-21T06:39:10.068Z,1526884750.068 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0121.lzma.bak
2018-05-21T06:39:10.068Z,1526884750.068 [DataOverHttps](INFO): SBD MOMSN=8287977
2018-05-21T06:39:10.076Z,1526884750.076 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T06:39:10.759Z,1526884750.759 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T06:39:10.759Z,1526884750.759 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T06:39:10.760Z,1526884750.760 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T06:39:40.843Z,1526884780.843 [NAL9602](INFO): Powering down
2018-05-21T06:41:49.808Z,1526884909.808 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:41:49.808Z,1526884909.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T06:41:49.808Z,1526884909.808 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:41:49.821Z,1526884909.821 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:41:50.226Z,1526884910.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:41:50.226Z,1526884910.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T06:41:50.614Z,1526884910.614 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:41:50.614Z,1526884910.614 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:41:50.615Z,1526884910.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:44:11.149Z,1526885051.149 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T06:44:11.149Z,1526885051.149 [Default:CheckIn:C.Wait] Stopped
2018-05-21T06:44:11.149Z,1526885051.149 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T06:44:11.149Z,1526885051.149 [Default:CheckIn:D] Running Loop=1
2018-05-21T06:44:11.568Z,1526885051.568 [Default:CheckIn:D] Stopped
2018-05-21T06:44:11.568Z,1526885051.568 [Default:CheckIn:E] Running Loop=1
2018-05-21T06:44:11.969Z,1526885051.969 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 422.642122 min 
2018-05-21T06:44:11.970Z,1526885051.970 [Default:CheckIn:E] Stopped
2018-05-21T06:44:11.970Z,1526885051.970 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T06:44:11.970Z,1526885051.970 [Default:CheckIn] Stopped
2018-05-21T06:44:11.970Z,1526885051.970 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T06:44:11.970Z,1526885051.970 [Default:CheckIn](INFO): Running loop #42
2018-05-21T06:44:11.970Z,1526885051.970 [Default:CheckIn] Running Loop=42
2018-05-21T06:44:11.971Z,1526885051.971 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T06:44:11.971Z,1526885051.971 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T06:44:15.491Z,1526885055.491 [NAL9602](INFO): Powering up
2018-05-21T06:44:26.376Z,1526885066.376 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:44:27.173Z,1526885067.173 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T06:44:27.173Z,1526885067.173 [NAL9602] Data Fault, FailCount= 5
2018-05-21T06:44:27.173Z,1526885067.173 [NAL9602](ERROR): Data Fault
2018-05-21T06:44:27.263Z,1526885067.263 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T06:44:27.263Z,1526885067.263 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T06:44:27.577Z,1526885067.577 [NAL9602](INFO): Powering down
2018-05-21T06:44:27.668Z,1526885067.668 [CBIT](INFO): Critical error at 20180521T064427
2018-05-21T06:44:28.456Z,1526885068.456 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T06:44:50.840Z,1526885090.840 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:44:50.840Z,1526885090.840 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T06:44:50.840Z,1526885090.840 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:44:50.853Z,1526885090.853 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:44:51.248Z,1526885091.248 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:44:51.248Z,1526885091.248 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T06:44:51.615Z,1526885091.615 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:44:51.616Z,1526885091.616 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:44:51.616Z,1526885091.616 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:46:27.546Z,1526885187.546 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T06:46:27.546Z,1526885187.546 [NAL9602] No Fault, FailCount= 5
2018-05-21T06:46:27.892Z,1526885187.892 [NAL9602](INFO): Powering up NAL9602
2018-05-21T06:46:39.091Z,1526885199.091 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:47:51.926Z,1526885271.926 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:47:51.927Z,1526885271.927 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T06:47:51.927Z,1526885271.927 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:47:51.939Z,1526885271.939 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:47:52.345Z,1526885272.345 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:47:52.345Z,1526885272.345 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T06:47:52.736Z,1526885272.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:47:52.736Z,1526885272.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:47:52.736Z,1526885272.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:49:12.060Z,1526885352.060 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T06:44:11.0Z
2018-05-21T06:49:12.061Z,1526885352.061 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T06:49:12.061Z,1526885352.061 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T06:49:16.581Z,1526885356.581 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0123.lzma
2018-05-21T06:49:17.384Z,1526885357.384 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0123.lzma.bak
2018-05-21T06:49:17.384Z,1526885357.384 [DataOverHttps](INFO): SBD MOMSN=8287981
2018-05-21T06:49:26.319Z,1526885366.319 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0124.lzma
2018-05-21T06:49:27.108Z,1526885367.108 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0124.lzma.bak
2018-05-21T06:49:27.108Z,1526885367.108 [DataOverHttps](INFO): SBD MOMSN=8287984
2018-05-21T06:49:27.807Z,1526885367.807 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T06:49:27.807Z,1526885367.807 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T06:49:27.807Z,1526885367.807 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T06:50:52.759Z,1526885452.759 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:50:52.759Z,1526885452.759 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T06:50:52.760Z,1526885452.760 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:50:52.773Z,1526885452.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:50:53.211Z,1526885453.211 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:50:53.211Z,1526885453.211 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T06:50:53.557Z,1526885453.557 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:50:53.558Z,1526885453.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:50:53.559Z,1526885453.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:51:42.700Z,1526885502.700 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T06:52:13.499Z,1526885533.499 [NAL9602](INFO): Powering down
2018-05-21T06:53:53.585Z,1526885633.585 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:53:53.585Z,1526885633.585 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T06:53:53.585Z,1526885633.585 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:53:53.606Z,1526885633.606 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:53:53.993Z,1526885633.993 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:53:53.993Z,1526885633.993 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T06:53:54.386Z,1526885634.386 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:53:54.387Z,1526885634.387 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:53:54.387Z,1526885634.387 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:54:27.988Z,1526885667.988 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T06:54:27.989Z,1526885667.989 [Default:CheckIn:C.Wait] Stopped
2018-05-21T06:54:27.989Z,1526885667.989 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T06:54:27.989Z,1526885667.989 [Default:CheckIn:D] Running Loop=1
2018-05-21T06:54:28.392Z,1526885668.392 [Default:CheckIn:D] Stopped
2018-05-21T06:54:28.392Z,1526885668.392 [Default:CheckIn:E] Running Loop=1
2018-05-21T06:54:28.788Z,1526885668.788 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 432.922526 min 
2018-05-21T06:54:28.788Z,1526885668.788 [Default:CheckIn:E] Stopped
2018-05-21T06:54:28.788Z,1526885668.788 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T06:54:28.789Z,1526885668.789 [Default:CheckIn] Stopped
2018-05-21T06:54:28.789Z,1526885668.789 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T06:54:28.789Z,1526885668.789 [Default:CheckIn](INFO): Running loop #43
2018-05-21T06:54:28.789Z,1526885668.789 [Default:CheckIn] Running Loop=43
2018-05-21T06:54:28.789Z,1526885668.789 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T06:54:28.789Z,1526885668.789 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T06:54:28.799Z,1526885668.799 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T06:54:31.955Z,1526885671.955 [NAL9602](INFO): Powering up
2018-05-21T06:54:43.108Z,1526885683.108 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:55:15.108Z,1526885715.108 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T06:55:15.190Z,1526885715.190 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T06:55:15.190Z,1526885715.190 [NAL9602] Data Fault, FailCount= 1
2018-05-21T06:55:15.190Z,1526885715.190 [NAL9602](ERROR): Data Fault
2018-05-21T06:55:15.324Z,1526885715.324 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T06:55:15.507Z,1526885715.507 [NAL9602](INFO): Powering down
2018-05-21T06:55:16.435Z,1526885716.435 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T06:55:16.435Z,1526885716.435 [NAL9602] No Fault, FailCount= 1
2018-05-21T06:55:45.515Z,1526885745.515 [NAL9602](INFO): Powering up NAL9602
2018-05-21T06:55:56.716Z,1526885756.716 [NAL9602](INFO): NAL9602 initialized
2018-05-21T06:56:54.434Z,1526885814.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:56:54.435Z,1526885814.435 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T06:56:54.435Z,1526885814.435 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:56:54.447Z,1526885814.447 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:56:54.853Z,1526885814.853 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:56:54.853Z,1526885814.853 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T06:56:55.239Z,1526885815.239 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:56:55.239Z,1526885815.239 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:56:55.240Z,1526885815.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T06:59:28.821Z,1526885968.821 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T06:54:28.8Z
2018-05-21T06:59:28.821Z,1526885968.821 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T06:59:28.821Z,1526885968.821 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T06:59:32.841Z,1526885972.841 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0126.lzma
2018-05-21T06:59:33.640Z,1526885973.640 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0126.lzma.bak
2018-05-21T06:59:33.640Z,1526885973.640 [DataOverHttps](INFO): SBD MOMSN=8287989
2018-05-21T06:59:42.657Z,1526885982.657 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0127.lzma
2018-05-21T06:59:43.424Z,1526885983.424 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0127.lzma.bak
2018-05-21T06:59:43.424Z,1526885983.424 [DataOverHttps](INFO): SBD MOMSN=8287991
2018-05-21T06:59:44.117Z,1526885984.117 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T06:59:44.117Z,1526885984.117 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T06:59:44.117Z,1526885984.117 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T06:59:47.408Z,1526885987.408 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T06:59:55.523Z,1526885995.523 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T06:59:55.523Z,1526885995.523 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T06:59:55.523Z,1526885995.523 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T06:59:55.570Z,1526885995.570 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T06:59:55.932Z,1526885995.932 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T06:59:55.932Z,1526885995.932 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T06:59:56.322Z,1526885996.322 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T06:59:56.323Z,1526885996.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T06:59:56.323Z,1526885996.323 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:00:17.879Z,1526886017.879 [NAL9602](INFO): Powering down
2018-05-21T07:02:56.461Z,1526886176.461 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:02:56.461Z,1526886176.461 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T07:02:56.461Z,1526886176.461 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:02:56.484Z,1526886176.484 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:02:56.873Z,1526886176.873 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:02:56.873Z,1526886176.873 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T07:02:57.265Z,1526886177.265 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:02:57.265Z,1526886177.265 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:02:57.265Z,1526886177.265 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:04:28.936Z,1526886268.936 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T07:04:44.526Z,1526886284.526 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T07:04:44.526Z,1526886284.526 [Default:CheckIn:C.Wait] Stopped
2018-05-21T07:04:44.526Z,1526886284.526 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T07:04:44.526Z,1526886284.526 [Default:CheckIn:D] Running Loop=1
2018-05-21T07:04:44.939Z,1526886284.939 [Default:CheckIn:D] Stopped
2018-05-21T07:04:44.939Z,1526886284.939 [Default:CheckIn:E] Running Loop=1
2018-05-21T07:04:45.332Z,1526886285.332 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 443.198307 min 
2018-05-21T07:04:45.332Z,1526886285.332 [Default:CheckIn:E] Stopped
2018-05-21T07:04:45.332Z,1526886285.332 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T07:04:45.332Z,1526886285.332 [Default:CheckIn] Stopped
2018-05-21T07:04:45.332Z,1526886285.332 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T07:04:45.333Z,1526886285.333 [Default:CheckIn](INFO): Running loop #44
2018-05-21T07:04:45.333Z,1526886285.333 [Default:CheckIn] Running Loop=44
2018-05-21T07:04:45.333Z,1526886285.333 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T07:04:45.333Z,1526886285.333 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T07:04:48.535Z,1526886288.535 [NAL9602](INFO): Powering up
2018-05-21T07:04:59.708Z,1526886299.708 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:05:00.508Z,1526886300.508 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T07:05:00.508Z,1526886300.508 [NAL9602] Data Fault, FailCount= 2
2018-05-21T07:05:00.508Z,1526886300.508 [NAL9602](ERROR): Data Fault
2018-05-21T07:05:00.590Z,1526886300.590 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T07:05:00.907Z,1526886300.907 [NAL9602](INFO): Powering down
2018-05-21T07:05:01.778Z,1526886301.778 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T07:05:01.778Z,1526886301.778 [NAL9602] No Fault, FailCount= 2
2018-05-21T07:05:30.916Z,1526886330.916 [NAL9602](INFO): Powering up NAL9602
2018-05-21T07:05:42.107Z,1526886342.107 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:05:57.274Z,1526886357.274 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:05:57.274Z,1526886357.274 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T07:05:57.274Z,1526886357.274 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:05:57.287Z,1526886357.287 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:05:57.693Z,1526886357.693 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:05:57.693Z,1526886357.693 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T07:05:58.066Z,1526886358.066 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:05:58.067Z,1526886358.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:05:58.067Z,1526886358.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:08:58.192Z,1526886538.192 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:08:58.192Z,1526886538.192 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T07:08:58.192Z,1526886538.192 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:08:58.237Z,1526886538.237 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:08:58.237Z,1526886538.237 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:09:45.398Z,1526886585.398 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T07:04:45.3Z
2018-05-21T07:09:45.399Z,1526886585.399 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T07:09:45.399Z,1526886585.399 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T07:09:49.081Z,1526886589.081 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0129.lzma
2018-05-21T07:09:49.872Z,1526886589.872 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0129.lzma.bak
2018-05-21T07:09:49.872Z,1526886589.872 [DataOverHttps](INFO): SBD MOMSN=8287996
2018-05-21T07:09:58.737Z,1526886598.737 [DataOverHttps](INFO): Sending 273 bytes from file Logs/20180520T234132/Express0130.lzma
2018-05-21T07:09:59.536Z,1526886599.536 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0130.lzma.bak
2018-05-21T07:09:59.536Z,1526886599.536 [DataOverHttps](INFO): SBD MOMSN=8287998
2018-05-21T07:10:00.232Z,1526886600.232 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T07:10:00.232Z,1526886600.232 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T07:10:00.232Z,1526886600.232 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T07:10:48.800Z,1526886648.800 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T07:11:19.571Z,1526886679.571 [NAL9602](INFO): Powering down
2018-05-21T07:14:29.038Z,1526886869.038 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T07:15:00.628Z,1526886900.628 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T07:15:00.628Z,1526886900.628 [Default:CheckIn:C.Wait] Stopped
2018-05-21T07:15:00.629Z,1526886900.629 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T07:15:00.629Z,1526886900.629 [Default:CheckIn:D] Running Loop=1
2018-05-21T07:15:01.036Z,1526886901.036 [Default:CheckIn:D] Stopped
2018-05-21T07:15:01.036Z,1526886901.036 [Default:CheckIn:E] Running Loop=1
2018-05-21T07:15:01.436Z,1526886901.436 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 453.466569 min 
2018-05-21T07:15:01.437Z,1526886901.437 [Default:CheckIn:E] Stopped
2018-05-21T07:15:01.437Z,1526886901.437 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T07:15:01.437Z,1526886901.437 [Default:CheckIn] Stopped
2018-05-21T07:15:01.437Z,1526886901.437 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T07:15:01.437Z,1526886901.437 [Default:CheckIn](INFO): Running loop #45
2018-05-21T07:15:01.437Z,1526886901.437 [Default:CheckIn] Running Loop=45
2018-05-21T07:15:01.437Z,1526886901.437 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T07:15:01.437Z,1526886901.437 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T07:15:04.747Z,1526886904.747 [NAL9602](INFO): Powering up
2018-05-21T07:15:15.896Z,1526886915.896 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:15:47.896Z,1526886947.896 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T07:15:47.970Z,1526886947.970 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T07:15:47.970Z,1526886947.970 [NAL9602] Data Fault, FailCount= 3
2018-05-21T07:15:47.970Z,1526886947.970 [NAL9602](ERROR): Data Fault
2018-05-21T07:15:48.051Z,1526886948.051 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T07:15:48.295Z,1526886948.295 [NAL9602](INFO): Powering down
2018-05-21T07:15:49.148Z,1526886949.148 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T07:15:49.148Z,1526886949.148 [NAL9602] No Fault, FailCount= 3
2018-05-21T07:16:18.459Z,1526886978.459 [NAL9602](INFO): Powering up NAL9602
2018-05-21T07:16:29.664Z,1526886989.664 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:16:30.460Z,1526886990.460 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T07:16:30.460Z,1526886990.460 [NAL9602] Data Fault, FailCount= 4
2018-05-21T07:16:30.460Z,1526886990.460 [NAL9602](ERROR): Data Fault
2018-05-21T07:16:30.539Z,1526886990.539 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T07:16:30.859Z,1526886990.859 [NAL9602](INFO): Powering down
2018-05-21T07:16:31.718Z,1526886991.718 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T07:16:31.718Z,1526886991.718 [NAL9602] No Fault, FailCount= 4
2018-05-21T07:17:01.260Z,1526887021.260 [NAL9602](INFO): Powering up NAL9602
2018-05-21T07:17:12.068Z,1526887032.068 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:20:01.829Z,1526887201.829 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T07:15:01.4Z
2018-05-21T07:20:01.829Z,1526887201.829 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T07:20:01.829Z,1526887201.829 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T07:20:05.707Z,1526887205.707 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0132.lzma
2018-05-21T07:20:06.500Z,1526887206.500 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0132.lzma.bak
2018-05-21T07:20:06.500Z,1526887206.500 [DataOverHttps](INFO): SBD MOMSN=8288004
2018-05-21T07:20:15.400Z,1526887215.400 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180520T234132/Express0133.lzma
2018-05-21T07:20:16.176Z,1526887216.176 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0133.lzma.bak
2018-05-21T07:20:16.176Z,1526887216.176 [DataOverHttps](INFO): SBD MOMSN=8288006
2018-05-21T07:20:16.872Z,1526887216.872 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T07:20:16.872Z,1526887216.872 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T07:20:16.872Z,1526887216.872 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T07:20:20.272Z,1526887220.272 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T07:20:50.783Z,1526887250.783 [NAL9602](INFO): Powering down
2018-05-21T07:23:58.338Z,1526887438.338 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:23:58.338Z,1526887438.338 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T07:23:58.720Z,1526887438.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:23:58.721Z,1526887438.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:23:58.721Z,1526887438.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:24:29.151Z,1526887469.151 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T07:25:17.131Z,1526887517.131 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T07:25:17.131Z,1526887517.131 [Default:CheckIn:C.Wait] Stopped
2018-05-21T07:25:17.132Z,1526887517.132 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T07:25:17.132Z,1526887517.132 [Default:CheckIn:D] Running Loop=1
2018-05-21T07:25:17.571Z,1526887517.571 [Default:CheckIn:D] Stopped
2018-05-21T07:25:17.571Z,1526887517.571 [Default:CheckIn:E] Running Loop=1
2018-05-21T07:25:17.981Z,1526887517.981 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 463.742155 min 
2018-05-21T07:25:17.981Z,1526887517.981 [Default:CheckIn:E] Stopped
2018-05-21T07:25:17.981Z,1526887517.981 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T07:25:17.981Z,1526887517.981 [Default:CheckIn] Stopped
2018-05-21T07:25:17.981Z,1526887517.981 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T07:25:17.982Z,1526887517.982 [Default:CheckIn](INFO): Running loop #46
2018-05-21T07:25:17.982Z,1526887517.982 [Default:CheckIn] Running Loop=46
2018-05-21T07:25:17.982Z,1526887517.982 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T07:25:17.982Z,1526887517.982 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T07:25:18.655Z,1526887518.655 [NAL9602](INFO): Powering up
2018-05-21T07:25:29.628Z,1526887529.628 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:26:01.628Z,1526887561.628 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T07:26:01.706Z,1526887561.706 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T07:26:01.706Z,1526887561.706 [NAL9602] Data Fault, FailCount= 5
2018-05-21T07:26:01.706Z,1526887561.706 [NAL9602](ERROR): Data Fault
2018-05-21T07:26:01.781Z,1526887561.781 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T07:26:01.781Z,1526887561.781 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T07:26:02.035Z,1526887562.035 [NAL9602](INFO): Powering down
2018-05-21T07:26:02.104Z,1526887562.104 [CBIT](INFO): Critical error at 20180521T072601
2018-05-21T07:26:58.925Z,1526887618.925 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:26:58.925Z,1526887618.925 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T07:26:58.925Z,1526887618.925 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:26:58.962Z,1526887618.962 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:26:59.345Z,1526887619.345 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:26:59.345Z,1526887619.345 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T07:26:59.732Z,1526887619.732 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:26:59.732Z,1526887619.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:26:59.732Z,1526887619.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:28:01.787Z,1526887681.787 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T07:28:01.787Z,1526887681.787 [NAL9602] No Fault, FailCount= 5
2018-05-21T07:28:02.112Z,1526887682.112 [NAL9602](INFO): Powering up NAL9602
2018-05-21T07:28:13.311Z,1526887693.311 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:28:14.120Z,1526887694.120 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T07:28:14.120Z,1526887694.120 [NAL9602] Data Fault, FailCount= 1
2018-05-21T07:28:14.120Z,1526887694.120 [NAL9602](ERROR): Data Fault
2018-05-21T07:28:14.201Z,1526887694.201 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T07:28:14.511Z,1526887694.511 [NAL9602](INFO): Powering down
2018-05-21T07:28:15.366Z,1526887695.366 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T07:28:15.366Z,1526887695.366 [NAL9602] No Fault, FailCount= 1
2018-05-21T07:28:44.607Z,1526887724.607 [NAL9602](INFO): Powering up NAL9602
2018-05-21T07:28:55.808Z,1526887735.808 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:29:59.867Z,1526887799.867 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:29:59.867Z,1526887799.867 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T07:29:59.867Z,1526887799.867 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:29:59.880Z,1526887799.880 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:30:00.281Z,1526887800.281 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:30:00.281Z,1526887800.281 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T07:30:00.671Z,1526887800.671 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:30:00.671Z,1526887800.671 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:30:00.671Z,1526887800.671 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:30:18.300Z,1526887818.300 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T07:25:17.0Z
2018-05-21T07:30:18.300Z,1526887818.300 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T07:30:18.301Z,1526887818.301 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T07:30:22.335Z,1526887822.335 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0135.lzma
2018-05-21T07:30:23.128Z,1526887823.128 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0135.lzma.bak
2018-05-21T07:30:23.128Z,1526887823.128 [DataOverHttps](INFO): SBD MOMSN=8288012
2018-05-21T07:30:31.956Z,1526887831.956 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0136.lzma
2018-05-21T07:30:32.744Z,1526887832.744 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0136.lzma.bak
2018-05-21T07:30:32.744Z,1526887832.744 [DataOverHttps](INFO): SBD MOMSN=8288015
2018-05-21T07:30:32.752Z,1526887832.752 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T07:30:33.461Z,1526887833.461 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T07:30:33.461Z,1526887833.461 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T07:30:33.461Z,1526887833.461 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T07:31:03.743Z,1526887863.743 [NAL9602](INFO): Powering down
2018-05-21T07:33:00.960Z,1526887980.960 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:33:00.960Z,1526887980.960 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T07:33:00.960Z,1526887980.960 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:33:00.973Z,1526887980.973 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:33:01.391Z,1526887981.391 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:33:01.391Z,1526887981.391 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T07:33:01.771Z,1526887981.771 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:33:01.772Z,1526887981.772 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:33:01.772Z,1526887981.772 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:34:29.400Z,1526888069.400 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T07:35:33.912Z,1526888133.912 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T07:35:33.912Z,1526888133.912 [Default:CheckIn:C.Wait] Stopped
2018-05-21T07:35:33.913Z,1526888133.913 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T07:35:33.913Z,1526888133.913 [Default:CheckIn:D] Running Loop=1
2018-05-21T07:35:34.308Z,1526888134.308 [Default:CheckIn:D] Stopped
2018-05-21T07:35:34.308Z,1526888134.308 [Default:CheckIn:E] Running Loop=1
2018-05-21T07:35:34.713Z,1526888134.713 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 474.021126 min 
2018-05-21T07:35:34.713Z,1526888134.713 [Default:CheckIn:E] Stopped
2018-05-21T07:35:34.713Z,1526888134.713 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T07:35:34.713Z,1526888134.713 [Default:CheckIn] Stopped
2018-05-21T07:35:34.713Z,1526888134.713 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T07:35:34.714Z,1526888134.714 [Default:CheckIn](INFO): Running loop #47
2018-05-21T07:35:34.714Z,1526888134.714 [Default:CheckIn] Running Loop=47
2018-05-21T07:35:34.714Z,1526888134.714 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T07:35:34.714Z,1526888134.714 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T07:35:37.883Z,1526888137.883 [NAL9602](INFO): Powering up
2018-05-21T07:35:49.028Z,1526888149.028 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:36:01.872Z,1526888161.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:36:01.872Z,1526888161.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T07:36:01.872Z,1526888161.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:36:01.885Z,1526888161.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:36:02.311Z,1526888162.311 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:36:02.311Z,1526888162.311 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T07:36:02.686Z,1526888162.686 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:36:02.687Z,1526888162.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:36:02.687Z,1526888162.687 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:39:02.969Z,1526888342.969 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:39:02.970Z,1526888342.970 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T07:39:02.970Z,1526888342.970 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:39:03.007Z,1526888343.007 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:39:03.430Z,1526888343.430 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:39:03.430Z,1526888343.430 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T07:39:03.782Z,1526888343.782 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:39:03.783Z,1526888343.783 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:39:03.783Z,1526888343.783 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:40:35.008Z,1526888435.008 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T07:35:34.7Z
2018-05-21T07:40:35.008Z,1526888435.008 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T07:40:35.008Z,1526888435.008 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T07:40:38.830Z,1526888438.830 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0138.lzma
2018-05-21T07:40:39.632Z,1526888439.632 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0138.lzma.bak
2018-05-21T07:40:39.632Z,1526888439.632 [DataOverHttps](INFO): SBD MOMSN=8288021
2018-05-21T07:40:48.445Z,1526888448.445 [DataOverHttps](INFO): Sending 200 bytes from file Logs/20180520T234132/Express0139.lzma
2018-05-21T07:40:49.244Z,1526888449.244 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0139.lzma.bak
2018-05-21T07:40:49.244Z,1526888449.244 [DataOverHttps](INFO): SBD MOMSN=8288023
2018-05-21T07:40:49.944Z,1526888449.944 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T07:40:49.944Z,1526888449.944 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T07:40:49.944Z,1526888449.944 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T07:40:53.192Z,1526888453.192 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T07:41:23.663Z,1526888483.663 [NAL9602](INFO): Powering down
2018-05-21T07:42:04.115Z,1526888524.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:42:04.115Z,1526888524.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T07:42:04.115Z,1526888524.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:42:04.161Z,1526888524.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:42:04.519Z,1526888524.519 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:42:04.519Z,1526888524.519 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T07:42:04.914Z,1526888524.914 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:42:04.915Z,1526888524.915 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:42:04.915Z,1526888524.915 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:44:29.790Z,1526888669.790 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T07:45:04.985Z,1526888704.985 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:45:04.985Z,1526888704.985 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T07:45:04.985Z,1526888704.985 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:45:04.998Z,1526888704.998 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:45:05.403Z,1526888705.403 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:45:05.403Z,1526888705.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T07:45:05.784Z,1526888705.784 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:45:05.785Z,1526888705.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:45:05.785Z,1526888705.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:45:50.193Z,1526888750.193 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T07:45:50.194Z,1526888750.194 [Default:CheckIn:C.Wait] Stopped
2018-05-21T07:45:50.194Z,1526888750.194 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T07:45:50.194Z,1526888750.194 [Default:CheckIn:D] Running Loop=1
2018-05-21T07:45:50.596Z,1526888750.596 [Default:CheckIn:D] Stopped
2018-05-21T07:45:50.596Z,1526888750.596 [Default:CheckIn:E] Running Loop=1
2018-05-21T07:45:53.855Z,1526888753.855 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 484.292578 min 
2018-05-21T07:45:53.856Z,1526888753.856 [Default:CheckIn:E] Stopped
2018-05-21T07:45:53.856Z,1526888753.856 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T07:45:53.856Z,1526888753.856 [Default:CheckIn] Stopped
2018-05-21T07:45:53.856Z,1526888753.856 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T07:45:53.856Z,1526888753.856 [Default:CheckIn](INFO): Running loop #48
2018-05-21T07:45:53.856Z,1526888753.856 [Default:CheckIn] Running Loop=48
2018-05-21T07:45:53.856Z,1526888753.856 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T07:45:53.856Z,1526888753.856 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T07:45:54.299Z,1526888754.299 [NAL9602](INFO): Powering up
2018-05-21T07:46:05.500Z,1526888765.500 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:46:06.300Z,1526888766.300 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T07:46:06.300Z,1526888766.300 [NAL9602] Data Fault, FailCount= 2
2018-05-21T07:46:06.300Z,1526888766.300 [NAL9602](ERROR): Data Fault
2018-05-21T07:46:06.398Z,1526888766.398 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T07:46:06.699Z,1526888766.699 [NAL9602](INFO): Powering down
2018-05-21T07:46:07.561Z,1526888767.561 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T07:46:07.561Z,1526888767.561 [NAL9602] No Fault, FailCount= 2
2018-05-21T07:46:37.100Z,1526888797.100 [NAL9602](INFO): Powering up NAL9602
2018-05-21T07:46:48.299Z,1526888808.299 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:48:06.051Z,1526888886.051 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:48:06.051Z,1526888886.051 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T07:48:06.052Z,1526888886.052 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:48:06.064Z,1526888886.064 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:48:06.491Z,1526888886.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:48:06.491Z,1526888886.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T07:48:06.870Z,1526888886.870 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:48:06.871Z,1526888886.871 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:48:06.871Z,1526888886.871 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:50:54.718Z,1526889054.718 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T07:45:53.9Z
2018-05-21T07:50:54.719Z,1526889054.719 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T07:50:54.719Z,1526889054.719 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T07:50:59.565Z,1526889059.565 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0141.lzma
2018-05-21T07:51:00.358Z,1526889060.358 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0141.lzma.bak
2018-05-21T07:51:00.358Z,1526889060.358 [DataOverHttps](INFO): SBD MOMSN=8288027
2018-05-21T07:51:09.420Z,1526889069.420 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:51:09.420Z,1526889069.420 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T07:51:09.420Z,1526889069.420 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:51:09.432Z,1526889069.432 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:51:09.478Z,1526889069.478 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0142.lzma
2018-05-21T07:51:09.587Z,1526889069.587 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:51:09.587Z,1526889069.587 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T07:51:09.913Z,1526889069.913 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:51:09.913Z,1526889069.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:51:09.914Z,1526889069.914 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:51:10.242Z,1526889070.242 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0142.lzma.bak
2018-05-21T07:51:10.242Z,1526889070.242 [DataOverHttps](INFO): SBD MOMSN=8288029
2018-05-21T07:51:10.937Z,1526889070.937 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T07:51:10.937Z,1526889070.937 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T07:51:10.937Z,1526889070.937 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T07:51:54.261Z,1526889114.261 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T07:52:24.775Z,1526889144.775 [NAL9602](INFO): Powering down
2018-05-21T07:54:10.202Z,1526889250.202 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:54:10.203Z,1526889250.203 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T07:54:10.203Z,1526889250.203 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:54:10.232Z,1526889250.232 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:54:10.612Z,1526889250.612 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:54:10.612Z,1526889250.612 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T07:54:10.000Z,1526889251.000 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:54:11.000Z,1526889251.000 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:54:11.001Z,1526889251.001 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:54:29.841Z,1526889269.841 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T07:56:11.382Z,1526889371.382 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T07:56:11.382Z,1526889371.382 [Default:CheckIn:C.Wait] Stopped
2018-05-21T07:56:11.383Z,1526889371.383 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T07:56:11.383Z,1526889371.383 [Default:CheckIn:D] Running Loop=1
2018-05-21T07:56:11.782Z,1526889371.782 [Default:CheckIn:D] Stopped
2018-05-21T07:56:11.782Z,1526889371.782 [Default:CheckIn:E] Running Loop=1
2018-05-21T07:56:12.185Z,1526889372.185 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 494.645671 min 
2018-05-21T07:56:12.185Z,1526889372.185 [Default:CheckIn:E] Stopped
2018-05-21T07:56:12.185Z,1526889372.185 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T07:56:12.185Z,1526889372.185 [Default:CheckIn] Stopped
2018-05-21T07:56:12.185Z,1526889372.185 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T07:56:12.186Z,1526889372.186 [Default:CheckIn](INFO): Running loop #49
2018-05-21T07:56:12.186Z,1526889372.186 [Default:CheckIn] Running Loop=49
2018-05-21T07:56:12.186Z,1526889372.186 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T07:56:12.186Z,1526889372.186 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T07:56:15.559Z,1526889375.559 [NAL9602](INFO): Powering up
2018-05-21T07:56:26.708Z,1526889386.708 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:56:58.715Z,1526889418.715 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T07:56:58.790Z,1526889418.790 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T07:56:58.790Z,1526889418.790 [NAL9602] Data Fault, FailCount= 3
2018-05-21T07:56:58.790Z,1526889418.790 [NAL9602](ERROR): Data Fault
2018-05-21T07:56:58.884Z,1526889418.884 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T07:56:59.107Z,1526889419.107 [NAL9602](INFO): Powering down
2018-05-21T07:57:00.007Z,1526889420.007 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T07:57:00.007Z,1526889420.007 [NAL9602] No Fault, FailCount= 3
2018-05-21T07:57:11.173Z,1526889431.173 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T07:57:11.173Z,1526889431.173 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T07:57:11.173Z,1526889431.173 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T07:57:11.186Z,1526889431.186 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T07:57:11.578Z,1526889431.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T07:57:11.579Z,1526889431.579 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T07:57:11.951Z,1526889431.951 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T07:57:11.951Z,1526889431.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T07:57:11.951Z,1526889431.951 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T07:57:29.112Z,1526889449.112 [NAL9602](INFO): Powering up NAL9602
2018-05-21T07:57:40.307Z,1526889460.307 [NAL9602](INFO): NAL9602 initialized
2018-05-21T07:57:41.108Z,1526889461.108 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T07:57:41.108Z,1526889461.108 [NAL9602] Data Fault, FailCount= 4
2018-05-21T07:57:41.108Z,1526889461.108 [NAL9602](ERROR): Data Fault
2018-05-21T07:57:41.207Z,1526889461.207 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T07:57:41.507Z,1526889461.507 [NAL9602](INFO): Powering down
2018-05-21T07:57:42.373Z,1526889462.373 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T07:57:42.373Z,1526889462.373 [NAL9602] No Fault, FailCount= 4
2018-05-21T07:58:11.904Z,1526889491.904 [NAL9602](INFO): Powering up NAL9602
2018-05-21T07:58:22.708Z,1526889502.708 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:00:12.015Z,1526889612.015 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:00:12.016Z,1526889612.016 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T08:00:12.016Z,1526889612.016 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:00:12.028Z,1526889612.028 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:00:12.426Z,1526889612.426 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:00:12.426Z,1526889612.426 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T08:00:12.805Z,1526889612.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:00:12.806Z,1526889612.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:00:12.806Z,1526889612.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:01:12.437Z,1526889672.437 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T07:56:12.2Z
2018-05-21T08:01:12.437Z,1526889672.437 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T08:01:12.437Z,1526889672.437 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T08:01:16.431Z,1526889676.431 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0144.lzma
2018-05-21T08:01:17.200Z,1526889677.200 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0144.lzma.bak
2018-05-21T08:01:17.200Z,1526889677.200 [DataOverHttps](INFO): SBD MOMSN=8288034
2018-05-21T08:01:26.092Z,1526889686.092 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180520T234132/Express0145.lzma
2018-05-21T08:01:26.892Z,1526889686.892 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0145.lzma.bak
2018-05-21T08:01:26.892Z,1526889686.892 [DataOverHttps](INFO): SBD MOMSN=8288036
2018-05-21T08:01:27.581Z,1526889687.581 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T08:01:27.581Z,1526889687.581 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T08:01:27.581Z,1526889687.581 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T08:01:30.811Z,1526889690.811 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T08:02:01.299Z,1526889721.299 [NAL9602](INFO): Powering down
2018-05-21T08:03:12.916Z,1526889792.916 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:03:12.916Z,1526889792.916 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T08:03:12.916Z,1526889792.916 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:03:12.929Z,1526889792.929 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:03:13.337Z,1526889793.337 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:03:13.338Z,1526889793.338 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T08:03:13.720Z,1526889793.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:03:13.720Z,1526889793.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:03:13.721Z,1526889793.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:04:31.935Z,1526889871.935 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T08:06:14.035Z,1526889974.035 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:06:14.035Z,1526889974.035 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T08:06:14.035Z,1526889974.035 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:06:14.048Z,1526889974.048 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:06:14.458Z,1526889974.458 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:06:14.458Z,1526889974.458 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T08:06:14.836Z,1526889974.836 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:06:14.837Z,1526889974.837 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:06:14.837Z,1526889974.837 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:06:28.035Z,1526889988.035 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T08:06:28.035Z,1526889988.035 [Default:CheckIn:C.Wait] Stopped
2018-05-21T08:06:28.035Z,1526889988.035 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T08:06:28.035Z,1526889988.035 [Default:CheckIn:D] Running Loop=1
2018-05-21T08:06:28.445Z,1526889988.445 [Default:CheckIn:D] Stopped
2018-05-21T08:06:28.445Z,1526889988.445 [Default:CheckIn:E] Running Loop=1
2018-05-21T08:06:28.837Z,1526889988.837 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 504.923405 min 
2018-05-21T08:06:28.837Z,1526889988.837 [Default:CheckIn:E] Stopped
2018-05-21T08:06:28.837Z,1526889988.837 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T08:06:28.837Z,1526889988.837 [Default:CheckIn] Stopped
2018-05-21T08:06:28.838Z,1526889988.838 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T08:06:28.838Z,1526889988.838 [Default:CheckIn](INFO): Running loop #50
2018-05-21T08:06:28.838Z,1526889988.838 [Default:CheckIn] Running Loop=50
2018-05-21T08:06:28.838Z,1526889988.838 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T08:06:28.838Z,1526889988.838 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T08:06:32.028Z,1526889992.028 [NAL9602](INFO): Powering up
2018-05-21T08:06:43.179Z,1526890003.179 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:07:15.172Z,1526890035.172 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T08:07:15.254Z,1526890035.254 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T08:07:15.254Z,1526890035.254 [NAL9602] Data Fault, FailCount= 5
2018-05-21T08:07:15.254Z,1526890035.254 [NAL9602](ERROR): Data Fault
2018-05-21T08:07:15.316Z,1526890035.316 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T08:07:15.316Z,1526890035.316 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T08:07:15.580Z,1526890035.580 [NAL9602](INFO): Powering down
2018-05-21T08:07:15.625Z,1526890035.625 [CBIT](INFO): Critical error at 20180521T080715
2018-05-21T08:09:14.839Z,1526890154.839 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:09:14.839Z,1526890154.839 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T08:09:14.839Z,1526890154.839 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:09:14.852Z,1526890154.852 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:09:15.254Z,1526890155.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:09:15.254Z,1526890155.254 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T08:09:15.645Z,1526890155.645 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:09:15.645Z,1526890155.645 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:09:15.646Z,1526890155.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:09:15.670Z,1526890155.670 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T08:09:15.671Z,1526890155.671 [NAL9602] No Fault, FailCount= 5
2018-05-21T08:09:15.995Z,1526890155.995 [NAL9602](INFO): Powering up NAL9602
2018-05-21T08:09:27.195Z,1526890167.195 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:09:27.996Z,1526890167.996 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T08:09:27.996Z,1526890167.996 [NAL9602] Data Fault, FailCount= 1
2018-05-21T08:09:27.996Z,1526890167.996 [NAL9602](ERROR): Data Fault
2018-05-21T08:09:28.075Z,1526890168.075 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T08:09:28.400Z,1526890168.400 [NAL9602](INFO): Powering down
2018-05-21T08:09:29.254Z,1526890169.254 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T08:09:29.254Z,1526890169.254 [NAL9602] No Fault, FailCount= 1
2018-05-21T08:09:58.767Z,1526890198.767 [NAL9602](INFO): Powering up NAL9602
2018-05-21T08:10:09.968Z,1526890209.968 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:11:28.910Z,1526890288.910 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T08:06:28.8Z
2018-05-21T08:11:28.910Z,1526890288.910 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T08:11:28.911Z,1526890288.911 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T08:11:33.225Z,1526890293.225 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0147.lzma
2018-05-21T08:11:34.024Z,1526890294.024 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0147.lzma.bak
2018-05-21T08:11:34.024Z,1526890294.024 [DataOverHttps](INFO): SBD MOMSN=8288042
2018-05-21T08:11:42.904Z,1526890302.904 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0148.lzma
2018-05-21T08:11:43.673Z,1526890303.673 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0148.lzma.bak
2018-05-21T08:11:43.673Z,1526890303.673 [DataOverHttps](INFO): SBD MOMSN=8288045
2018-05-21T08:11:44.381Z,1526890304.381 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T08:11:44.381Z,1526890304.381 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T08:11:44.381Z,1526890304.381 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T08:11:47.785Z,1526890307.785 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T08:12:15.916Z,1526890335.916 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:12:15.916Z,1526890335.916 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T08:12:15.916Z,1526890335.916 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:12:15.951Z,1526890335.951 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:12:16.342Z,1526890336.342 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:12:16.342Z,1526890336.342 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T08:12:16.716Z,1526890336.716 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:12:16.717Z,1526890336.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:12:16.717Z,1526890336.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:12:18.275Z,1526890338.275 [NAL9602](INFO): Powering down
2018-05-21T08:14:31.998Z,1526890471.998 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T08:15:16.935Z,1526890516.935 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:15:16.935Z,1526890516.935 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T08:15:16.935Z,1526890516.935 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:15:16.992Z,1526890516.992 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:15:17.433Z,1526890517.433 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:15:17.433Z,1526890517.433 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T08:15:17.775Z,1526890517.775 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:15:17.776Z,1526890517.776 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:15:17.776Z,1526890517.776 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:16:44.925Z,1526890604.925 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T08:16:44.925Z,1526890604.925 [Default:CheckIn:C.Wait] Stopped
2018-05-21T08:16:44.925Z,1526890604.925 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T08:16:44.926Z,1526890604.926 [Default:CheckIn:D] Running Loop=1
2018-05-21T08:16:45.326Z,1526890605.326 [Default:CheckIn:D] Stopped
2018-05-21T08:16:45.326Z,1526890605.326 [Default:CheckIn:E] Running Loop=1
2018-05-21T08:16:45.726Z,1526890605.726 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 515.204753 min 
2018-05-21T08:16:45.726Z,1526890605.726 [Default:CheckIn:E] Stopped
2018-05-21T08:16:45.726Z,1526890605.726 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T08:16:45.726Z,1526890605.727 [Default:CheckIn] Stopped
2018-05-21T08:16:45.727Z,1526890605.727 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T08:16:45.727Z,1526890605.727 [Default:CheckIn](INFO): Running loop #51
2018-05-21T08:16:45.727Z,1526890605.727 [Default:CheckIn] Running Loop=51
2018-05-21T08:16:45.727Z,1526890605.727 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T08:16:45.727Z,1526890605.727 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T08:16:49.261Z,1526890609.261 [NAL9602](INFO): Powering up
2018-05-21T08:17:00.179Z,1526890620.179 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:17:14.210Z,1526890634.210 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T08:17:14.210Z,1526890634.210 [BPC1] Communications Fault, FailCount= 1
2018-05-21T08:17:14.210Z,1526890634.210 [BPC1](ERROR): Communications Fault
2018-05-21T08:17:14.268Z,1526890634.268 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T08:17:15.423Z,1526890635.423 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T08:17:15.423Z,1526890635.423 [BPC1] No Fault, FailCount= 1
2018-05-21T08:18:17.901Z,1526890697.901 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:18:17.901Z,1526890697.901 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T08:18:17.901Z,1526890697.901 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:18:17.916Z,1526890697.916 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:18:18.313Z,1526890698.313 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:18:18.313Z,1526890698.313 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T08:18:18.704Z,1526890698.704 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:18:18.705Z,1526890698.705 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:18:18.705Z,1526890698.705 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:21:18.874Z,1526890878.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:21:18.874Z,1526890878.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T08:21:18.874Z,1526890878.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:21:18.887Z,1526890878.887 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:21:19.274Z,1526890879.274 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:21:19.274Z,1526890879.274 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T08:21:19.661Z,1526890879.661 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:21:19.662Z,1526890879.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:21:19.662Z,1526890879.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:21:46.069Z,1526890906.069 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T08:16:45.7Z
2018-05-21T08:21:46.070Z,1526890906.070 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T08:21:46.070Z,1526890906.070 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T08:21:49.939Z,1526890909.939 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0150.lzma
2018-05-21T08:21:50.730Z,1526890910.730 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0150.lzma.bak
2018-05-21T08:21:50.730Z,1526890910.730 [DataOverHttps](INFO): SBD MOMSN=8288051
2018-05-21T08:21:59.660Z,1526890919.660 [DataOverHttps](INFO): Sending 199 bytes from file Logs/20180520T234132/Express0151.lzma
2018-05-21T08:22:00.460Z,1526890920.460 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0151.lzma.bak
2018-05-21T08:22:00.460Z,1526890920.460 [DataOverHttps](INFO): SBD MOMSN=8288053
2018-05-21T08:22:01.160Z,1526890921.160 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T08:22:01.160Z,1526890921.160 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T08:22:01.160Z,1526890921.160 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T08:22:04.372Z,1526890924.372 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T08:22:34.871Z,1526890954.871 [NAL9602](INFO): Powering down
2018-05-21T08:24:19.779Z,1526891059.779 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:24:19.779Z,1526891059.779 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T08:24:19.779Z,1526891059.779 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:24:19.791Z,1526891059.791 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:24:19.792Z,1526891059.792 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:24:32.186Z,1526891072.186 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T08:24:49.767Z,1526891089.767 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T08:24:49.767Z,1526891089.767 [BPC1] Communications Fault, FailCount= 2
2018-05-21T08:24:49.767Z,1526891089.767 [BPC1](ERROR): Communications Fault
2018-05-21T08:24:49.835Z,1526891089.835 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T08:24:50.987Z,1526891090.987 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T08:24:50.987Z,1526891090.987 [BPC1] No Fault, FailCount= 2
2018-05-21T08:27:01.429Z,1526891221.429 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T08:27:01.429Z,1526891221.429 [Default:CheckIn:C.Wait] Stopped
2018-05-21T08:27:01.429Z,1526891221.429 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T08:27:01.429Z,1526891221.429 [Default:CheckIn:D] Running Loop=1
2018-05-21T08:27:01.847Z,1526891221.847 [Default:CheckIn:D] Stopped
2018-05-21T08:27:01.847Z,1526891221.847 [Default:CheckIn:E] Running Loop=1
2018-05-21T08:27:02.236Z,1526891222.236 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 525.480111 min 
2018-05-21T08:27:02.236Z,1526891222.236 [Default:CheckIn:E] Stopped
2018-05-21T08:27:02.236Z,1526891222.236 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T08:27:02.237Z,1526891222.237 [Default:CheckIn] Stopped
2018-05-21T08:27:02.237Z,1526891222.237 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T08:27:02.237Z,1526891222.237 [Default:CheckIn](INFO): Running loop #52
2018-05-21T08:27:02.237Z,1526891222.237 [Default:CheckIn] Running Loop=52
2018-05-21T08:27:02.237Z,1526891222.237 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T08:27:02.237Z,1526891222.237 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T08:27:05.428Z,1526891225.428 [NAL9602](INFO): Powering up
2018-05-21T08:27:16.600Z,1526891236.600 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:27:17.400Z,1526891237.400 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T08:27:17.400Z,1526891237.400 [NAL9602] Data Fault, FailCount= 2
2018-05-21T08:27:17.400Z,1526891237.400 [NAL9602](ERROR): Data Fault
2018-05-21T08:27:17.503Z,1526891237.503 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T08:27:17.799Z,1526891237.799 [NAL9602](INFO): Powering down
2018-05-21T08:27:18.695Z,1526891238.695 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T08:27:18.695Z,1526891238.695 [NAL9602] No Fault, FailCount= 2
2018-05-21T08:27:47.803Z,1526891267.803 [NAL9602](INFO): Powering up NAL9602
2018-05-21T08:27:58.999Z,1526891278.999 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:32:02.555Z,1526891522.555 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T08:27:02.2Z
2018-05-21T08:32:02.555Z,1526891522.555 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T08:32:02.555Z,1526891522.555 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T08:32:06.227Z,1526891526.227 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0153.lzma
2018-05-21T08:32:07.024Z,1526891527.024 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0153.lzma.bak
2018-05-21T08:32:07.024Z,1526891527.024 [DataOverHttps](INFO): SBD MOMSN=8288057
2018-05-21T08:32:16.307Z,1526891536.307 [DataOverHttps](INFO): Sending 274 bytes from file Logs/20180520T234132/Express0154.lzma
2018-05-21T08:32:17.104Z,1526891537.104 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0154.lzma.bak
2018-05-21T08:32:17.104Z,1526891537.104 [DataOverHttps](INFO): SBD MOMSN=8288059
2018-05-21T08:32:17.804Z,1526891537.804 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T08:32:17.804Z,1526891537.804 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T08:32:17.804Z,1526891537.804 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T08:33:05.560Z,1526891585.560 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T08:33:36.139Z,1526891616.139 [NAL9602](INFO): Powering down
2018-05-21T08:34:32.194Z,1526891672.194 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T08:36:01.352Z,1526891761.352 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T08:36:01.352Z,1526891761.352 [BPC1] Communications Fault, FailCount= 3
2018-05-21T08:36:01.353Z,1526891761.353 [BPC1](ERROR): Communications Fault
2018-05-21T08:36:01.376Z,1526891761.376 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T08:36:02.571Z,1526891762.571 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T08:36:02.571Z,1526891762.571 [BPC1] No Fault, FailCount= 3
2018-05-21T08:37:18.280Z,1526891838.280 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T08:37:18.280Z,1526891838.280 [Default:CheckIn:C.Wait] Stopped
2018-05-21T08:37:18.280Z,1526891838.280 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T08:37:18.280Z,1526891838.280 [Default:CheckIn:D] Running Loop=1
2018-05-21T08:37:18.678Z,1526891838.678 [Default:CheckIn:D] Stopped
2018-05-21T08:37:18.678Z,1526891838.678 [Default:CheckIn:E] Running Loop=1
2018-05-21T08:37:19.088Z,1526891839.088 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 535.760612 min 
2018-05-21T08:37:19.088Z,1526891839.088 [Default:CheckIn:E] Stopped
2018-05-21T08:37:19.088Z,1526891839.088 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T08:37:19.088Z,1526891839.088 [Default:CheckIn] Stopped
2018-05-21T08:37:19.088Z,1526891839.088 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T08:37:19.089Z,1526891839.089 [Default:CheckIn](INFO): Running loop #53
2018-05-21T08:37:19.089Z,1526891839.089 [Default:CheckIn] Running Loop=53
2018-05-21T08:37:19.089Z,1526891839.089 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T08:37:19.089Z,1526891839.089 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T08:37:22.735Z,1526891842.735 [NAL9602](INFO): Powering up
2018-05-21T08:37:33.612Z,1526891853.612 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:38:05.612Z,1526891885.612 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T08:38:05.694Z,1526891885.694 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T08:38:05.694Z,1526891885.694 [NAL9602] Data Fault, FailCount= 3
2018-05-21T08:38:05.694Z,1526891885.694 [NAL9602](ERROR): Data Fault
2018-05-21T08:38:05.785Z,1526891885.785 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T08:38:06.011Z,1526891886.011 [NAL9602](INFO): Powering down
2018-05-21T08:38:06.863Z,1526891886.863 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T08:38:06.863Z,1526891886.863 [NAL9602] No Fault, FailCount= 3
2018-05-21T08:38:36.176Z,1526891916.176 [NAL9602](INFO): Powering up NAL9602
2018-05-21T08:38:47.376Z,1526891927.376 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:38:48.176Z,1526891928.176 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T08:38:48.176Z,1526891928.176 [NAL9602] Data Fault, FailCount= 4
2018-05-21T08:38:48.176Z,1526891928.176 [NAL9602](ERROR): Data Fault
2018-05-21T08:38:48.248Z,1526891928.248 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T08:38:48.575Z,1526891928.575 [NAL9602](INFO): Powering down
2018-05-21T08:38:49.447Z,1526891929.447 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T08:38:49.447Z,1526891929.447 [NAL9602] No Fault, FailCount= 4
2018-05-21T08:39:18.975Z,1526891958.975 [NAL9602](INFO): Powering up NAL9602
2018-05-21T08:39:19.837Z,1526891959.837 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:39:19.837Z,1526891959.837 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T08:39:22.936Z,1526891962.936 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:39:22.937Z,1526891962.937 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:39:22.937Z,1526891962.937 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:39:29.795Z,1526891969.795 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:42:19.122Z,1526892139.122 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T08:37:19.1Z
2018-05-21T08:42:19.156Z,1526892139.156 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T08:42:19.156Z,1526892139.156 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T08:42:23.505Z,1526892143.505 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:42:23.505Z,1526892143.505 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T08:42:23.505Z,1526892143.505 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:42:23.519Z,1526892143.519 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:42:23.529Z,1526892143.529 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0156.lzma
2018-05-21T08:42:23.660Z,1526892143.660 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:42:23.660Z,1526892143.660 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T08:42:23.976Z,1526892143.976 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:42:23.977Z,1526892143.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:42:23.977Z,1526892143.977 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:42:24.328Z,1526892144.328 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0156.lzma.bak
2018-05-21T08:42:24.328Z,1526892144.328 [DataOverHttps](INFO): SBD MOMSN=8288065
2018-05-21T08:42:33.443Z,1526892153.443 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0157.lzma
2018-05-21T08:42:34.220Z,1526892154.220 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0157.lzma.bak
2018-05-21T08:42:34.220Z,1526892154.220 [DataOverHttps](INFO): SBD MOMSN=8288067
2018-05-21T08:42:34.925Z,1526892154.925 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T08:42:34.925Z,1526892154.925 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T08:42:34.925Z,1526892154.925 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T08:42:38.136Z,1526892158.136 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T08:42:41.455Z,1526892161.455 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T08:42:41.455Z,1526892161.455 [BPC1] Communications Fault, FailCount= 4
2018-05-21T08:42:41.455Z,1526892161.455 [BPC1](ERROR): Communications Fault
2018-05-21T08:42:41.480Z,1526892161.480 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T08:42:42.683Z,1526892162.683 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T08:42:42.684Z,1526892162.684 [BPC1] No Fault, FailCount= 4
2018-05-21T08:43:08.623Z,1526892188.623 [NAL9602](INFO): Powering down
2018-05-21T08:44:32.376Z,1526892272.376 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T08:45:24.014Z,1526892324.014 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:45:24.014Z,1526892324.014 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T08:45:24.018Z,1526892324.018 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:45:24.039Z,1526892324.039 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:45:24.454Z,1526892324.454 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:45:24.454Z,1526892324.454 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T08:45:24.815Z,1526892324.815 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:45:24.815Z,1526892324.815 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:45:24.815Z,1526892324.815 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:47:35.211Z,1526892455.211 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T08:47:35.211Z,1526892455.211 [Default:CheckIn:C.Wait] Stopped
2018-05-21T08:47:35.211Z,1526892455.211 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T08:47:35.211Z,1526892455.211 [Default:CheckIn:D] Running Loop=1
2018-05-21T08:47:35.601Z,1526892455.601 [Default:CheckIn:D] Stopped
2018-05-21T08:47:35.601Z,1526892455.601 [Default:CheckIn:E] Running Loop=1
2018-05-21T08:47:36.003Z,1526892456.003 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 546.042676 min 
2018-05-21T08:47:36.003Z,1526892456.003 [Default:CheckIn:E] Stopped
2018-05-21T08:47:36.003Z,1526892456.003 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T08:47:36.004Z,1526892456.004 [Default:CheckIn] Stopped
2018-05-21T08:47:36.004Z,1526892456.004 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T08:47:36.004Z,1526892456.004 [Default:CheckIn](INFO): Running loop #54
2018-05-21T08:47:36.004Z,1526892456.004 [Default:CheckIn] Running Loop=54
2018-05-21T08:47:36.004Z,1526892456.004 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T08:47:36.004Z,1526892456.004 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T08:47:39.402Z,1526892459.402 [NAL9602](INFO): Powering up
2018-05-21T08:47:50.580Z,1526892470.580 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:48:22.580Z,1526892502.580 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T08:48:22.658Z,1526892502.658 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T08:48:22.658Z,1526892502.658 [NAL9602] Data Fault, FailCount= 5
2018-05-21T08:48:22.658Z,1526892502.658 [NAL9602](ERROR): Data Fault
2018-05-21T08:48:22.744Z,1526892502.744 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T08:48:22.745Z,1526892502.745 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T08:48:22.979Z,1526892502.979 [NAL9602](INFO): Powering down
2018-05-21T08:48:23.067Z,1526892503.067 [CBIT](INFO): Critical error at 20180521T084822
2018-05-21T08:48:25.030Z,1526892505.030 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:48:25.030Z,1526892505.030 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T08:48:25.030Z,1526892505.030 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:48:25.043Z,1526892505.043 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:48:25.457Z,1526892505.457 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:48:25.457Z,1526892505.457 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T08:48:25.846Z,1526892505.846 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:48:25.846Z,1526892505.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:48:25.847Z,1526892505.847 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:50:22.858Z,1526892622.858 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T08:50:22.858Z,1526892622.858 [NAL9602] No Fault, FailCount= 5
2018-05-21T08:50:23.187Z,1526892623.187 [NAL9602](INFO): Powering up NAL9602
2018-05-21T08:50:34.387Z,1526892634.387 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:50:35.187Z,1526892635.187 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T08:50:35.188Z,1526892635.188 [NAL9602] Data Fault, FailCount= 1
2018-05-21T08:50:35.188Z,1526892635.188 [NAL9602](ERROR): Data Fault
2018-05-21T08:50:35.277Z,1526892635.277 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T08:50:35.587Z,1526892635.587 [NAL9602](INFO): Powering down
2018-05-21T08:50:36.453Z,1526892636.453 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T08:50:36.453Z,1526892636.453 [NAL9602] No Fault, FailCount= 1
2018-05-21T08:51:05.980Z,1526892665.980 [NAL9602](INFO): Powering up NAL9602
2018-05-21T08:51:16.821Z,1526892676.821 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T08:51:16.821Z,1526892676.821 [BPC1] Communications Fault, FailCount= 5
2018-05-21T08:51:16.821Z,1526892676.821 [BPC1](ERROR): Communications Fault
2018-05-21T08:51:16.857Z,1526892676.857 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T08:51:17.180Z,1526892677.180 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:51:18.056Z,1526892678.056 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T08:51:18.056Z,1526892678.056 [BPC1] No Fault, FailCount= 5
2018-05-21T08:51:26.041Z,1526892686.041 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:51:26.041Z,1526892686.041 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T08:51:26.041Z,1526892686.041 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:51:26.054Z,1526892686.054 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:51:26.456Z,1526892686.456 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:51:26.456Z,1526892686.456 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T08:51:26.818Z,1526892686.818 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:51:26.819Z,1526892686.819 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:51:26.819Z,1526892686.819 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:52:36.096Z,1526892756.096 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T08:47:36.0Z
2018-05-21T08:52:36.096Z,1526892756.096 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T08:52:36.096Z,1526892756.096 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T08:52:40.045Z,1526892760.045 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20180520T234132/Courier0159.lzma
2018-05-21T08:52:40.824Z,1526892760.824 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0159.lzma.bak
2018-05-21T08:52:40.824Z,1526892760.824 [DataOverHttps](INFO): SBD MOMSN=8288073
2018-05-21T08:52:49.851Z,1526892769.851 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0160.lzma
2018-05-21T08:52:50.652Z,1526892770.652 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0160.lzma.bak
2018-05-21T08:52:50.652Z,1526892770.652 [DataOverHttps](INFO): SBD MOMSN=8288076
2018-05-21T08:52:51.369Z,1526892771.369 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T08:52:51.369Z,1526892771.369 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T08:52:51.369Z,1526892771.369 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T08:52:54.570Z,1526892774.570 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T08:53:25.067Z,1526892805.067 [NAL9602](INFO): Powering down
2018-05-21T08:54:27.101Z,1526892867.101 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:54:27.101Z,1526892867.101 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T08:54:27.101Z,1526892867.101 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:54:27.115Z,1526892867.115 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:54:27.518Z,1526892867.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:54:27.518Z,1526892867.518 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T08:54:27.906Z,1526892867.906 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:54:27.907Z,1526892867.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:54:27.907Z,1526892867.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:54:32.720Z,1526892872.720 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T08:57:28.125Z,1526893048.125 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T08:57:28.125Z,1526893048.125 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T08:57:28.125Z,1526893048.125 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T08:57:28.138Z,1526893048.138 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T08:57:28.537Z,1526893048.537 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T08:57:28.537Z,1526893048.537 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T08:57:28.899Z,1526893048.899 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T08:57:28.899Z,1526893048.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T08:57:28.899Z,1526893048.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T08:57:51.701Z,1526893071.701 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T08:57:51.701Z,1526893071.701 [Default:CheckIn:C.Wait] Stopped
2018-05-21T08:57:51.701Z,1526893071.701 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T08:57:51.701Z,1526893071.701 [Default:CheckIn:D] Running Loop=1
2018-05-21T08:57:52.117Z,1526893072.117 [Default:CheckIn:D] Stopped
2018-05-21T08:57:52.117Z,1526893072.117 [Default:CheckIn:E] Running Loop=1
2018-05-21T08:57:52.531Z,1526893072.531 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 556.317904 min 
2018-05-21T08:57:52.531Z,1526893072.531 [Default:CheckIn:E] Stopped
2018-05-21T08:57:52.531Z,1526893072.531 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T08:57:52.531Z,1526893072.531 [Default:CheckIn] Stopped
2018-05-21T08:57:52.531Z,1526893072.531 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T08:57:52.531Z,1526893072.531 [Default:CheckIn](INFO): Running loop #55
2018-05-21T08:57:52.531Z,1526893072.531 [Default:CheckIn] Running Loop=55
2018-05-21T08:57:52.532Z,1526893072.532 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T08:57:52.532Z,1526893072.532 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T08:57:56.091Z,1526893076.091 [NAL9602](INFO): Powering up
2018-05-21T08:58:06.970Z,1526893086.970 [NAL9602](INFO): NAL9602 initialized
2018-05-21T08:58:38.968Z,1526893118.968 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T08:58:39.050Z,1526893119.050 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T08:58:39.050Z,1526893119.050 [NAL9602] Data Fault, FailCount= 2
2018-05-21T08:58:39.050Z,1526893119.050 [NAL9602](ERROR): Data Fault
2018-05-21T08:58:39.151Z,1526893119.151 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T08:58:39.367Z,1526893119.367 [NAL9602](INFO): Powering down
2018-05-21T08:58:40.224Z,1526893120.224 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T08:58:40.224Z,1526893120.224 [NAL9602] No Fault, FailCount= 2
2018-05-21T08:59:09.524Z,1526893149.524 [NAL9602](INFO): Powering up NAL9602
2018-05-21T08:59:20.323Z,1526893160.323 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:00:29.242Z,1526893229.242 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:00:29.242Z,1526893229.242 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T09:00:29.242Z,1526893229.242 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:00:29.255Z,1526893229.255 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:00:29.652Z,1526893229.652 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:00:29.653Z,1526893229.653 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T09:00:30.046Z,1526893230.046 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:00:30.047Z,1526893230.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:00:30.047Z,1526893230.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:02:17.617Z,1526893337.617 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T09:02:17.617Z,1526893337.617 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T09:02:52.866Z,1526893372.866 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T08:57:52.5Z
2018-05-21T09:02:52.866Z,1526893372.866 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T09:02:52.866Z,1526893372.866 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T09:02:56.847Z,1526893376.847 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0162.lzma
2018-05-21T09:02:57.640Z,1526893377.640 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0162.lzma.bak
2018-05-21T09:02:57.640Z,1526893377.640 [DataOverHttps](INFO): SBD MOMSN=8288082
2018-05-21T09:03:06.613Z,1526893386.613 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0163.lzma
2018-05-21T09:03:07.412Z,1526893387.412 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0163.lzma.bak
2018-05-21T09:03:07.412Z,1526893387.412 [DataOverHttps](INFO): SBD MOMSN=8288084
2018-05-21T09:03:08.107Z,1526893388.107 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T09:03:08.107Z,1526893388.107 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T09:03:08.107Z,1526893388.107 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T09:03:11.389Z,1526893391.389 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T09:03:30.327Z,1526893410.327 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:03:30.327Z,1526893410.327 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T09:03:30.327Z,1526893410.327 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:03:30.339Z,1526893410.339 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:03:30.757Z,1526893410.757 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:03:30.757Z,1526893410.757 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T09:03:31.132Z,1526893411.132 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:03:31.132Z,1526893411.132 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:03:31.133Z,1526893411.133 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:03:41.879Z,1526893421.879 [NAL9602](INFO): Powering down
2018-05-21T09:03:51.532Z,1526893431.532 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.394608 seconds old.
2018-05-21T09:03:51.534Z,1526893431.534 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.394758 seconds old.
2018-05-21T09:03:51.936Z,1526893431.936 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.798845 seconds old.
2018-05-21T09:03:51.939Z,1526893431.939 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.799102 seconds old.
2018-05-21T09:03:52.316Z,1526893432.316 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.178986 seconds old.
2018-05-21T09:03:52.335Z,1526893432.335 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.195274 seconds old.
2018-05-21T09:03:52.726Z,1526893432.726 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.588012 seconds old.
2018-05-21T09:03:52.728Z,1526893432.728 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.588253 seconds old.
2018-05-21T09:03:53.120Z,1526893433.120 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.982134 seconds old.
2018-05-21T09:03:53.122Z,1526893433.122 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.982275 seconds old.
2018-05-21T09:03:53.521Z,1526893433.521 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.383250 seconds old.
2018-05-21T09:03:53.523Z,1526893433.523 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.383631 seconds old.
2018-05-21T09:03:53.919Z,1526893433.919 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.781493 seconds old.
2018-05-21T09:03:53.921Z,1526893433.921 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.781643 seconds old.
2018-05-21T09:03:54.327Z,1526893434.327 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.189293 seconds old.
2018-05-21T09:03:54.329Z,1526893434.329 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.189443 seconds old.
2018-05-21T09:04:33.114Z,1526893473.114 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T09:06:31.414Z,1526893591.414 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:06:31.414Z,1526893591.414 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T09:06:31.418Z,1526893591.418 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:06:31.439Z,1526893591.439 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:06:31.820Z,1526893591.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:06:31.820Z,1526893591.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T09:06:32.206Z,1526893592.206 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:06:32.207Z,1526893592.207 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:06:32.207Z,1526893592.207 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:08:08.612Z,1526893688.612 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T09:08:08.613Z,1526893688.613 [Default:CheckIn:C.Wait] Stopped
2018-05-21T09:08:08.613Z,1526893688.613 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T09:08:08.613Z,1526893688.613 [Default:CheckIn:D] Running Loop=1
2018-05-21T09:08:09.007Z,1526893689.007 [Default:CheckIn:D] Stopped
2018-05-21T09:08:09.007Z,1526893689.007 [Default:CheckIn:E] Running Loop=1
2018-05-21T09:08:09.405Z,1526893689.405 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 566.599414 min 
2018-05-21T09:08:09.406Z,1526893689.406 [Default:CheckIn:E] Stopped
2018-05-21T09:08:09.406Z,1526893689.406 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T09:08:09.406Z,1526893689.406 [Default:CheckIn] Stopped
2018-05-21T09:08:09.406Z,1526893689.406 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T09:08:09.406Z,1526893689.406 [Default:CheckIn](INFO): Running loop #56
2018-05-21T09:08:09.406Z,1526893689.406 [Default:CheckIn] Running Loop=56
2018-05-21T09:08:09.407Z,1526893689.407 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T09:08:09.407Z,1526893689.407 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T09:08:12.883Z,1526893692.883 [NAL9602](INFO): Powering up
2018-05-21T09:08:23.760Z,1526893703.760 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:08:24.560Z,1526893704.560 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T09:08:24.560Z,1526893704.560 [NAL9602] Data Fault, FailCount= 3
2018-05-21T09:08:24.560Z,1526893704.560 [NAL9602](ERROR): Data Fault
2018-05-21T09:08:24.647Z,1526893704.647 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T09:08:24.959Z,1526893704.959 [NAL9602](INFO): Powering down
2018-05-21T09:08:25.820Z,1526893705.820 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T09:08:25.820Z,1526893705.820 [NAL9602] No Fault, FailCount= 3
2018-05-21T09:08:55.359Z,1526893735.359 [NAL9602](INFO): Powering up NAL9602
2018-05-21T09:09:06.560Z,1526893746.560 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:09:32.252Z,1526893772.252 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:09:32.253Z,1526893772.253 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T09:09:32.253Z,1526893772.253 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:09:32.265Z,1526893772.265 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:09:32.666Z,1526893772.666 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:09:32.667Z,1526893772.667 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T09:09:33.059Z,1526893773.059 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:09:33.059Z,1526893773.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:09:33.060Z,1526893773.060 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:12:33.392Z,1526893953.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:12:33.392Z,1526893953.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T09:12:33.392Z,1526893953.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:12:33.451Z,1526893953.451 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:12:33.795Z,1526893953.795 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:12:33.795Z,1526893953.795 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T09:12:34.195Z,1526893954.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:12:34.195Z,1526893954.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:12:34.195Z,1526893954.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:13:09.798Z,1526893989.798 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T09:08:09.4Z
2018-05-21T09:13:09.798Z,1526893989.798 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T09:13:09.798Z,1526893989.798 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T09:13:14.318Z,1526893994.318 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0165.lzma
2018-05-21T09:13:15.118Z,1526893995.118 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0165.lzma.bak
2018-05-21T09:13:15.118Z,1526893995.118 [DataOverHttps](INFO): SBD MOMSN=8288089
2018-05-21T09:13:24.033Z,1526894004.033 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0166.lzma
2018-05-21T09:13:24.832Z,1526894004.832 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0166.lzma.bak
2018-05-21T09:13:24.832Z,1526894004.832 [DataOverHttps](INFO): SBD MOMSN=8288091
2018-05-21T09:13:25.527Z,1526894005.527 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T09:13:25.527Z,1526894005.527 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T09:13:25.527Z,1526894005.527 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T09:14:10.488Z,1526894050.488 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T09:14:33.364Z,1526894073.364 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T09:14:41.295Z,1526894081.295 [NAL9602](INFO): Powering down
2018-05-21T09:15:34.572Z,1526894134.572 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:15:34.572Z,1526894134.572 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T09:15:34.572Z,1526894134.572 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:15:34.601Z,1526894134.601 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:15:34.978Z,1526894134.978 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:15:34.978Z,1526894134.978 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T09:15:35.367Z,1526894135.367 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:15:35.368Z,1526894135.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:15:35.368Z,1526894135.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:18:25.961Z,1526894305.961 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T09:18:25.961Z,1526894305.961 [Default:CheckIn:C.Wait] Stopped
2018-05-21T09:18:25.961Z,1526894305.961 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T09:18:25.961Z,1526894305.961 [Default:CheckIn:D] Running Loop=1
2018-05-21T09:18:26.365Z,1526894306.365 [Default:CheckIn:D] Stopped
2018-05-21T09:18:26.365Z,1526894306.365 [Default:CheckIn:E] Running Loop=1
2018-05-21T09:18:29.558Z,1526894309.558 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 576.888737 min 
2018-05-21T09:18:29.558Z,1526894309.558 [Default:CheckIn:E] Stopped
2018-05-21T09:18:29.558Z,1526894309.558 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T09:18:29.558Z,1526894309.558 [Default:CheckIn] Stopped
2018-05-21T09:18:29.558Z,1526894309.558 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T09:18:29.558Z,1526894309.558 [Default:CheckIn](INFO): Running loop #57
2018-05-21T09:18:29.559Z,1526894309.559 [Default:CheckIn] Running Loop=57
2018-05-21T09:18:29.559Z,1526894309.559 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T09:18:29.559Z,1526894309.559 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T09:18:29.983Z,1526894309.983 [NAL9602](INFO): Powering up
2018-05-21T09:18:35.626Z,1526894315.626 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:18:35.626Z,1526894315.626 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T09:18:35.626Z,1526894315.626 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:18:35.640Z,1526894315.640 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:18:36.046Z,1526894316.046 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:18:36.046Z,1526894316.046 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T09:18:36.430Z,1526894316.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:18:36.430Z,1526894316.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:18:36.431Z,1526894316.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:18:40.784Z,1526894320.784 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:20:19.189Z,1526894419.189 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T09:20:19.189Z,1526894419.189 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T09:21:36.450Z,1526894496.450 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:21:36.450Z,1526894496.450 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T09:21:36.450Z,1526894496.450 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:21:36.463Z,1526894496.463 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:21:36.878Z,1526894496.878 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:21:36.878Z,1526894496.878 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T09:21:37.241Z,1526894497.241 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:21:37.242Z,1526894497.242 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:21:37.242Z,1526894497.242 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:23:29.648Z,1526894609.648 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T09:18:29.6Z
2018-05-21T09:23:29.648Z,1526894609.648 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T09:23:29.648Z,1526894609.648 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T09:23:34.520Z,1526894614.520 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0168.lzma
2018-05-21T09:23:35.320Z,1526894615.320 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0168.lzma.bak
2018-05-21T09:23:35.320Z,1526894615.320 [DataOverHttps](INFO): SBD MOMSN=8288096
2018-05-21T09:23:44.471Z,1526894624.471 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T09:23:44.580Z,1526894624.580 [DataOverHttps](INFO): Sending 199 bytes from file Logs/20180520T234132/Express0169.lzma
2018-05-21T09:23:45.364Z,1526894625.364 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0169.lzma.bak
2018-05-21T09:23:45.364Z,1526894625.364 [DataOverHttps](INFO): SBD MOMSN=8288098
2018-05-21T09:23:46.071Z,1526894626.071 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T09:23:46.071Z,1526894626.071 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T09:23:46.071Z,1526894626.071 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T09:24:14.739Z,1526894654.739 [NAL9602](INFO): Powering down
2018-05-21T09:24:33.584Z,1526894673.584 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T09:24:37.577Z,1526894677.577 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:24:37.577Z,1526894677.577 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T09:24:37.577Z,1526894677.577 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:24:37.598Z,1526894677.598 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:24:37.986Z,1526894677.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:24:37.986Z,1526894677.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T09:24:38.374Z,1526894678.374 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:24:38.375Z,1526894678.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:24:38.375Z,1526894678.375 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:27:38.421Z,1526894858.421 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:27:38.422Z,1526894858.422 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T09:27:38.422Z,1526894858.422 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:27:38.435Z,1526894858.435 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:27:38.839Z,1526894858.839 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:27:38.839Z,1526894858.839 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T09:27:39.220Z,1526894859.220 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:27:39.221Z,1526894859.221 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:27:39.221Z,1526894859.221 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:28:46.589Z,1526894926.589 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T09:28:46.590Z,1526894926.590 [Default:CheckIn:C.Wait] Stopped
2018-05-21T09:28:46.590Z,1526894926.590 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T09:28:46.590Z,1526894926.590 [Default:CheckIn:D] Running Loop=1
2018-05-21T09:28:46.982Z,1526894926.982 [Default:CheckIn:D] Stopped
2018-05-21T09:28:46.982Z,1526894926.982 [Default:CheckIn:E] Running Loop=1
2018-05-21T09:28:47.391Z,1526894927.391 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 587.232357 min 
2018-05-21T09:28:47.391Z,1526894927.391 [Default:CheckIn:E] Stopped
2018-05-21T09:28:47.391Z,1526894927.391 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T09:28:47.391Z,1526894927.391 [Default:CheckIn] Stopped
2018-05-21T09:28:47.391Z,1526894927.391 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T09:28:47.392Z,1526894927.392 [Default:CheckIn](INFO): Running loop #58
2018-05-21T09:28:47.392Z,1526894927.392 [Default:CheckIn] Running Loop=58
2018-05-21T09:28:47.392Z,1526894927.392 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T09:28:47.392Z,1526894927.392 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T09:28:50.559Z,1526894930.559 [NAL9602](INFO): Powering up
2018-05-21T09:29:01.711Z,1526894941.711 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:29:02.508Z,1526894942.508 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T09:29:02.508Z,1526894942.508 [NAL9602] Data Fault, FailCount= 4
2018-05-21T09:29:02.508Z,1526894942.508 [NAL9602](ERROR): Data Fault
2018-05-21T09:29:02.600Z,1526894942.600 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T09:29:02.907Z,1526894942.907 [NAL9602](INFO): Powering down
2018-05-21T09:29:03.765Z,1526894943.765 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T09:29:03.765Z,1526894943.765 [NAL9602] No Fault, FailCount= 4
2018-05-21T09:29:32.911Z,1526894972.911 [NAL9602](INFO): Powering up NAL9602
2018-05-21T09:29:44.107Z,1526894984.107 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:30:39.453Z,1526895039.453 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:30:39.453Z,1526895039.453 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T09:30:39.453Z,1526895039.453 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:30:39.466Z,1526895039.466 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:30:39.871Z,1526895039.871 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:30:39.871Z,1526895039.871 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T09:30:40.259Z,1526895040.259 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:30:40.259Z,1526895040.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:30:40.259Z,1526895040.259 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:33:40.274Z,1526895220.274 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:33:40.274Z,1526895220.274 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T09:33:40.274Z,1526895220.274 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:33:40.305Z,1526895220.305 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:33:40.664Z,1526895220.664 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:33:40.664Z,1526895220.664 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T09:33:41.056Z,1526895221.056 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:33:41.056Z,1526895221.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:33:41.057Z,1526895221.057 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:33:47.463Z,1526895227.463 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T09:28:47.4Z
2018-05-21T09:33:47.463Z,1526895227.463 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T09:33:47.464Z,1526895227.464 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T09:33:51.404Z,1526895231.404 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0171.lzma
2018-05-21T09:33:52.204Z,1526895232.204 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0171.lzma.bak
2018-05-21T09:33:52.204Z,1526895232.204 [DataOverHttps](INFO): SBD MOMSN=8288102
2018-05-21T09:34:01.211Z,1526895241.211 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0172.lzma
2018-05-21T09:34:01.988Z,1526895241.988 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0172.lzma.bak
2018-05-21T09:34:01.988Z,1526895241.988 [DataOverHttps](INFO): SBD MOMSN=8288104
2018-05-21T09:34:02.777Z,1526895242.777 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T09:34:02.777Z,1526895242.777 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T09:34:02.777Z,1526895242.777 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T09:34:33.765Z,1526895273.765 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T09:34:47.708Z,1526895287.708 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T09:35:18.267Z,1526895318.267 [NAL9602](INFO): Powering down
2018-05-21T09:36:41.096Z,1526895401.096 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:36:41.096Z,1526895401.096 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T09:36:41.096Z,1526895401.096 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:36:41.129Z,1526895401.129 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:36:41.543Z,1526895401.543 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:36:41.543Z,1526895401.543 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T09:36:41.890Z,1526895401.890 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:36:41.890Z,1526895401.890 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:36:41.891Z,1526895401.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:39:03.164Z,1526895543.164 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T09:39:03.165Z,1526895543.165 [Default:CheckIn:C.Wait] Stopped
2018-05-21T09:39:03.165Z,1526895543.165 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T09:39:03.165Z,1526895543.165 [Default:CheckIn:D] Running Loop=1
2018-05-21T09:39:03.557Z,1526895543.557 [Default:CheckIn:D] Stopped
2018-05-21T09:39:03.557Z,1526895543.557 [Default:CheckIn:E] Running Loop=1
2018-05-21T09:39:03.960Z,1526895543.960 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 597.508594 min 
2018-05-21T09:39:03.960Z,1526895543.960 [Default:CheckIn:E] Stopped
2018-05-21T09:39:03.960Z,1526895543.960 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T09:39:03.960Z,1526895543.960 [Default:CheckIn] Stopped
2018-05-21T09:39:03.960Z,1526895543.960 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T09:39:03.960Z,1526895543.960 [Default:CheckIn](INFO): Running loop #59
2018-05-21T09:39:03.960Z,1526895543.960 [Default:CheckIn] Running Loop=59
2018-05-21T09:39:03.961Z,1526895543.961 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T09:39:03.961Z,1526895543.961 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T09:39:07.622Z,1526895547.622 [NAL9602](INFO): Powering up
2018-05-21T09:39:18.492Z,1526895558.492 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:39:42.145Z,1526895582.145 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:39:42.145Z,1526895582.145 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T09:39:42.145Z,1526895582.145 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:39:42.209Z,1526895582.209 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:39:42.209Z,1526895582.209 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:39:50.492Z,1526895590.492 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T09:39:50.574Z,1526895590.574 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T09:39:50.574Z,1526895590.574 [NAL9602] Data Fault, FailCount= 5
2018-05-21T09:39:50.574Z,1526895590.574 [NAL9602](ERROR): Data Fault
2018-05-21T09:39:50.676Z,1526895590.676 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T09:39:50.677Z,1526895590.677 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T09:39:50.891Z,1526895590.891 [NAL9602](INFO): Powering down
2018-05-21T09:39:50.955Z,1526895590.955 [CBIT](INFO): Critical error at 20180521T093950
2018-05-21T09:41:50.960Z,1526895710.960 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T09:41:50.960Z,1526895710.960 [NAL9602] No Fault, FailCount= 5
2018-05-21T09:41:51.283Z,1526895711.283 [NAL9602](INFO): Powering up NAL9602
2018-05-21T09:42:02.483Z,1526895722.483 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:42:03.284Z,1526895723.284 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T09:42:03.284Z,1526895723.284 [NAL9602] Data Fault, FailCount= 1
2018-05-21T09:42:03.285Z,1526895723.285 [NAL9602](ERROR): Data Fault
2018-05-21T09:42:03.376Z,1526895723.376 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T09:42:03.687Z,1526895723.687 [NAL9602](INFO): Powering down
2018-05-21T09:42:04.552Z,1526895724.552 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T09:42:04.552Z,1526895724.552 [NAL9602] No Fault, FailCount= 1
2018-05-21T09:42:33.860Z,1526895753.860 [NAL9602](INFO): Powering up NAL9602
2018-05-21T09:42:45.060Z,1526895765.060 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:44:04.276Z,1526895844.276 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T09:39:03.0Z
2018-05-21T09:44:04.276Z,1526895844.276 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T09:44:04.276Z,1526895844.276 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T09:44:08.647Z,1526895848.647 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0174.lzma
2018-05-21T09:44:09.448Z,1526895849.448 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0174.lzma.bak
2018-05-21T09:44:09.448Z,1526895849.448 [DataOverHttps](INFO): SBD MOMSN=8288109
2018-05-21T09:44:18.362Z,1526895858.362 [DataOverHttps](INFO): Sending 312 bytes from file Logs/20180520T234132/Express0175.lzma
2018-05-21T09:44:19.128Z,1526895859.128 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0175.lzma.bak
2018-05-21T09:44:19.128Z,1526895859.128 [DataOverHttps](INFO): SBD MOMSN=8288112
2018-05-21T09:44:19.826Z,1526895859.826 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T09:44:19.826Z,1526895859.826 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T09:44:19.826Z,1526895859.826 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T09:44:23.042Z,1526895863.042 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T09:44:34.004Z,1526895874.004 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T09:44:53.531Z,1526895893.531 [NAL9602](INFO): Powering down
2018-05-21T09:49:20.200Z,1526896160.200 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T09:49:20.200Z,1526896160.200 [Default:CheckIn:C.Wait] Stopped
2018-05-21T09:49:20.200Z,1526896160.200 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T09:49:20.200Z,1526896160.200 [Default:CheckIn:D] Running Loop=1
2018-05-21T09:49:20.600Z,1526896160.600 [Default:CheckIn:D] Stopped
2018-05-21T09:49:20.600Z,1526896160.600 [Default:CheckIn:E] Running Loop=1
2018-05-21T09:49:23.839Z,1526896163.839 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 607.792643 min 
2018-05-21T09:49:23.839Z,1526896163.839 [Default:CheckIn:E] Stopped
2018-05-21T09:49:23.839Z,1526896163.839 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T09:49:23.839Z,1526896163.839 [Default:CheckIn] Stopped
2018-05-21T09:49:23.839Z,1526896163.839 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T09:49:23.839Z,1526896163.839 [Default:CheckIn](INFO): Running loop #60
2018-05-21T09:49:23.839Z,1526896163.839 [Default:CheckIn] Running Loop=60
2018-05-21T09:49:23.840Z,1526896163.840 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T09:49:23.840Z,1526896163.840 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T09:49:24.263Z,1526896164.263 [NAL9602](INFO): Powering up
2018-05-21T09:49:35.076Z,1526896175.076 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:50:07.064Z,1526896207.064 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T09:50:07.142Z,1526896207.142 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T09:50:07.142Z,1526896207.142 [NAL9602] Data Fault, FailCount= 2
2018-05-21T09:50:07.142Z,1526896207.142 [NAL9602](ERROR): Data Fault
2018-05-21T09:50:07.206Z,1526896207.206 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T09:50:07.473Z,1526896207.473 [NAL9602](INFO): Powering down
2018-05-21T09:50:08.387Z,1526896208.387 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T09:50:08.387Z,1526896208.387 [NAL9602] No Fault, FailCount= 2
2018-05-21T09:50:37.832Z,1526896237.832 [NAL9602](INFO): Powering up NAL9602
2018-05-21T09:50:49.032Z,1526896249.032 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:54:24.704Z,1526896464.704 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T09:49:23.8Z
2018-05-21T09:54:24.704Z,1526896464.704 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T09:54:24.704Z,1526896464.704 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T09:54:29.608Z,1526896469.608 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0177.lzma
2018-05-21T09:54:30.392Z,1526896470.392 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0177.lzma.bak
2018-05-21T09:54:30.392Z,1526896470.392 [DataOverHttps](INFO): SBD MOMSN=8288119
2018-05-21T09:54:34.541Z,1526896474.541 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T09:54:39.385Z,1526896479.385 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T09:54:39.453Z,1526896479.453 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20180520T234132/Express0178.lzma
2018-05-21T09:54:40.254Z,1526896480.254 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0178.lzma.bak
2018-05-21T09:54:40.260Z,1526896480.260 [DataOverHttps](INFO): SBD MOMSN=8288121
2018-05-21T09:54:40.949Z,1526896480.949 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T09:54:40.950Z,1526896480.950 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T09:54:40.950Z,1526896480.950 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T09:54:44.214Z,1526896484.214 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:54:44.214Z,1526896484.214 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T09:54:44.331Z,1526896484.331 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:54:44.332Z,1526896484.332 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:54:44.332Z,1526896484.332 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:55:09.827Z,1526896509.827 [NAL9602](INFO): Powering down
2018-05-21T09:57:44.849Z,1526896664.849 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T09:57:44.849Z,1526896664.849 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T09:57:44.849Z,1526896664.849 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T09:57:44.900Z,1526896664.900 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T09:57:45.027Z,1526896665.027 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T09:57:45.027Z,1526896665.027 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T09:57:45.352Z,1526896665.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T09:57:45.353Z,1526896665.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T09:57:45.353Z,1526896665.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T09:59:41.335Z,1526896781.335 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T09:59:41.335Z,1526896781.335 [Default:CheckIn:C.Wait] Stopped
2018-05-21T09:59:41.335Z,1526896781.335 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T09:59:41.335Z,1526896781.335 [Default:CheckIn:D] Running Loop=1
2018-05-21T09:59:41.741Z,1526896781.741 [Default:CheckIn:D] Stopped
2018-05-21T09:59:41.741Z,1526896781.741 [Default:CheckIn:E] Running Loop=1
2018-05-21T09:59:42.136Z,1526896782.136 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 618.144987 min 
2018-05-21T09:59:42.137Z,1526896782.137 [Default:CheckIn:E] Stopped
2018-05-21T09:59:42.137Z,1526896782.137 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T09:59:42.137Z,1526896782.137 [Default:CheckIn] Stopped
2018-05-21T09:59:42.137Z,1526896782.137 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T09:59:42.137Z,1526896782.137 [Default:CheckIn](INFO): Running loop #61
2018-05-21T09:59:42.137Z,1526896782.137 [Default:CheckIn] Running Loop=61
2018-05-21T09:59:42.137Z,1526896782.137 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T09:59:42.138Z,1526896782.138 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T09:59:45.383Z,1526896785.383 [NAL9602](INFO): Powering up
2018-05-21T09:59:56.552Z,1526896796.552 [NAL9602](INFO): NAL9602 initialized
2018-05-21T09:59:57.348Z,1526896797.348 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T09:59:57.348Z,1526896797.348 [NAL9602] Data Fault, FailCount= 3
2018-05-21T09:59:57.348Z,1526896797.348 [NAL9602](ERROR): Data Fault
2018-05-21T09:59:57.452Z,1526896797.452 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T09:59:57.751Z,1526896797.751 [NAL9602](INFO): Powering down
2018-05-21T09:59:58.601Z,1526896798.601 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T09:59:58.601Z,1526896798.601 [NAL9602] No Fault, FailCount= 3
2018-05-21T10:00:27.755Z,1526896827.755 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:00:38.952Z,1526896838.952 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:00:45.499Z,1526896845.499 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:00:45.499Z,1526896845.499 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T10:00:45.499Z,1526896845.499 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:00:45.511Z,1526896845.511 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:00:45.659Z,1526896845.659 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:00:45.659Z,1526896845.659 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T10:00:45.998Z,1526896845.998 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:00:45.999Z,1526896845.999 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:00:45.999Z,1526896845.999 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:03:46.132Z,1526897026.132 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:03:46.132Z,1526897026.132 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T10:03:46.132Z,1526897026.132 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:03:46.177Z,1526897026.177 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:03:46.296Z,1526897026.296 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:03:46.297Z,1526897026.297 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T10:03:46.642Z,1526897026.642 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:03:46.643Z,1526897026.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:03:46.643Z,1526897026.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:04:34.655Z,1526897074.655 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T10:04:42.262Z,1526897082.262 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T09:59:42.1Z
2018-05-21T10:04:42.262Z,1526897082.262 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T10:04:42.263Z,1526897082.263 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T10:04:46.243Z,1526897086.243 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0180.lzma
2018-05-21T10:04:46.984Z,1526897086.984 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0180.lzma.bak
2018-05-21T10:04:46.984Z,1526897086.984 [DataOverHttps](INFO): SBD MOMSN=8288126
2018-05-21T10:04:56.006Z,1526897096.006 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0181.lzma
2018-05-21T10:04:56.808Z,1526897096.808 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0181.lzma.bak
2018-05-21T10:04:56.808Z,1526897096.808 [DataOverHttps](INFO): SBD MOMSN=8288128
2018-05-21T10:04:57.529Z,1526897097.529 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T10:04:57.529Z,1526897097.529 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T10:04:57.529Z,1526897097.529 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T10:05:45.583Z,1526897145.583 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T10:06:16.095Z,1526897176.095 [NAL9602](INFO): Powering down
2018-05-21T10:06:46.945Z,1526897206.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:06:46.945Z,1526897206.945 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T10:06:46.945Z,1526897206.945 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:06:46.983Z,1526897206.983 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:06:47.360Z,1526897207.360 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:06:47.360Z,1526897207.360 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T10:06:47.748Z,1526897207.748 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:06:47.749Z,1526897207.749 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:06:47.749Z,1526897207.749 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:09:11.481Z,1526897351.481 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.388365 seconds old.
2018-05-21T10:09:11.483Z,1526897351.483 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.389012 seconds old.
2018-05-21T10:09:11.879Z,1526897351.879 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.786708 seconds old.
2018-05-21T10:09:11.881Z,1526897351.881 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.787127 seconds old.
2018-05-21T10:09:12.284Z,1526897352.284 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.191204 seconds old.
2018-05-21T10:09:12.286Z,1526897352.286 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.191609 seconds old.
2018-05-21T10:09:12.682Z,1526897352.682 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.589602 seconds old.
2018-05-21T10:09:12.684Z,1526897352.684 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.590226 seconds old.
2018-05-21T10:09:13.084Z,1526897353.084 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.991451 seconds old.
2018-05-21T10:09:13.086Z,1526897353.086 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.991845 seconds old.
2018-05-21T10:09:13.481Z,1526897353.481 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.388133 seconds old.
2018-05-21T10:09:13.483Z,1526897353.483 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.388621 seconds old.
2018-05-21T10:09:13.880Z,1526897353.880 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.787428 seconds old.
2018-05-21T10:09:13.882Z,1526897353.882 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.787835 seconds old.
2018-05-21T10:09:14.284Z,1526897354.284 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.191412 seconds old.
2018-05-21T10:09:14.286Z,1526897354.286 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.191821 seconds old.
2018-05-21T10:09:14.680Z,1526897354.680 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.587925 seconds old.
2018-05-21T10:09:14.683Z,1526897354.683 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.588403 seconds old.
2018-05-21T10:09:15.080Z,1526897355.080 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.987723 seconds old.
2018-05-21T10:09:15.084Z,1526897355.084 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.988823 seconds old.
2018-05-21T10:09:15.484Z,1526897355.484 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.391428 seconds old.
2018-05-21T10:09:15.486Z,1526897355.486 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.391823 seconds old.
2018-05-21T10:09:15.884Z,1526897355.884 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.791543 seconds old.
2018-05-21T10:09:15.886Z,1526897355.886 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.791956 seconds old.
2018-05-21T10:09:16.280Z,1526897356.280 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.187768 seconds old.
2018-05-21T10:09:16.283Z,1526897356.283 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.188373 seconds old.
2018-05-21T10:09:16.679Z,1526897356.679 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.586791 seconds old.
2018-05-21T10:09:16.681Z,1526897356.681 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.587202 seconds old.
2018-05-21T10:09:17.084Z,1526897357.084 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.991925 seconds old.
2018-05-21T10:09:17.087Z,1526897357.087 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.992397 seconds old.
2018-05-21T10:09:17.493Z,1526897357.493 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.400177 seconds old.
2018-05-21T10:09:17.495Z,1526897357.495 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.400828 seconds old.
2018-05-21T10:09:47.900Z,1526897387.900 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:09:47.900Z,1526897387.900 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T10:09:47.900Z,1526897387.900 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:09:47.913Z,1526897387.913 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:09:48.314Z,1526897388.314 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:09:48.314Z,1526897388.314 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T10:09:48.674Z,1526897388.674 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:09:48.674Z,1526897388.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:09:48.675Z,1526897388.675 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:09:57.882Z,1526897397.882 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T10:09:57.883Z,1526897397.883 [Default:CheckIn:C.Wait] Stopped
2018-05-21T10:09:57.883Z,1526897397.883 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T10:09:57.883Z,1526897397.883 [Default:CheckIn:D] Running Loop=1
2018-05-21T10:09:58.301Z,1526897398.301 [Default:CheckIn:D] Stopped
2018-05-21T10:09:58.301Z,1526897398.301 [Default:CheckIn:E] Running Loop=1
2018-05-21T10:09:58.693Z,1526897398.693 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 628.421029 min 
2018-05-21T10:09:58.693Z,1526897398.693 [Default:CheckIn:E] Stopped
2018-05-21T10:09:58.693Z,1526897398.693 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T10:09:58.693Z,1526897398.693 [Default:CheckIn] Stopped
2018-05-21T10:09:58.693Z,1526897398.693 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T10:09:58.694Z,1526897398.694 [Default:CheckIn](INFO): Running loop #62
2018-05-21T10:09:58.694Z,1526897398.694 [Default:CheckIn] Running Loop=62
2018-05-21T10:09:58.694Z,1526897398.694 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T10:09:58.694Z,1526897398.694 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T10:10:02.221Z,1526897402.221 [NAL9602](INFO): Powering up
2018-05-21T10:10:13.120Z,1526897413.120 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:10:45.120Z,1526897445.120 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T10:10:45.194Z,1526897445.194 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T10:10:45.194Z,1526897445.194 [NAL9602] Data Fault, FailCount= 4
2018-05-21T10:10:45.194Z,1526897445.194 [NAL9602](ERROR): Data Fault
2018-05-21T10:10:45.255Z,1526897445.255 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T10:10:45.527Z,1526897445.527 [NAL9602](INFO): Powering down
2018-05-21T10:10:46.375Z,1526897446.375 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T10:10:46.375Z,1526897446.375 [NAL9602] No Fault, FailCount= 4
2018-05-21T10:11:15.684Z,1526897475.684 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:11:26.880Z,1526897486.880 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:11:27.680Z,1526897487.680 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T10:11:27.680Z,1526897487.680 [NAL9602] Data Fault, FailCount= 5
2018-05-21T10:11:27.680Z,1526897487.680 [NAL9602](ERROR): Data Fault
2018-05-21T10:11:27.763Z,1526897487.763 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T10:11:27.764Z,1526897487.764 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T10:11:28.079Z,1526897488.079 [NAL9602](INFO): Powering down
2018-05-21T10:11:28.157Z,1526897488.157 [CBIT](INFO): Critical error at 20180521T101127
2018-05-21T10:12:48.919Z,1526897568.919 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:12:48.919Z,1526897568.919 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T10:12:48.919Z,1526897568.919 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:12:48.932Z,1526897568.932 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:12:49.334Z,1526897569.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:12:49.334Z,1526897569.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T10:12:49.720Z,1526897569.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:12:49.720Z,1526897569.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:12:49.720Z,1526897569.720 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:13:27.711Z,1526897607.711 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T10:13:27.711Z,1526897607.711 [NAL9602] No Fault, FailCount= 5
2018-05-21T10:13:28.052Z,1526897608.052 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:13:39.252Z,1526897619.252 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:14:35.064Z,1526897675.064 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T10:14:58.981Z,1526897698.981 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T10:09:58.7Z
2018-05-21T10:14:58.981Z,1526897698.981 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T10:14:58.981Z,1526897698.981 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T10:15:03.393Z,1526897703.393 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0183.lzma
2018-05-21T10:15:04.188Z,1526897704.188 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0183.lzma.bak
2018-05-21T10:15:04.188Z,1526897704.188 [DataOverHttps](INFO): SBD MOMSN=8288133
2018-05-21T10:15:15.674Z,1526897715.674 [DataOverHttps](INFO): Sending 254 bytes from file Logs/20180520T234132/Express0184.lzma
2018-05-21T10:15:16.063Z,1526897716.063 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T10:15:16.460Z,1526897716.460 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0184.lzma.bak
2018-05-21T10:15:16.460Z,1526897716.460 [DataOverHttps](INFO): SBD MOMSN=8288136
2018-05-21T10:15:17.609Z,1526897717.609 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T10:15:17.609Z,1526897717.609 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T10:15:17.609Z,1526897717.609 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T10:15:46.868Z,1526897746.868 [NAL9602](INFO): Powering down
2018-05-21T10:15:50.119Z,1526897750.119 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:15:50.119Z,1526897750.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T10:15:50.119Z,1526897750.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:15:50.131Z,1526897750.131 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:15:50.522Z,1526897750.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:15:50.522Z,1526897750.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T10:15:50.910Z,1526897750.910 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:15:50.911Z,1526897750.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:15:50.911Z,1526897750.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:18:50.984Z,1526897930.984 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:18:50.984Z,1526897930.984 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T10:18:50.984Z,1526897930.984 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:18:50.998Z,1526897930.998 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:18:51.391Z,1526897931.391 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:18:51.391Z,1526897931.391 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T10:18:51.784Z,1526897931.784 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:18:51.784Z,1526897931.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:18:51.785Z,1526897931.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:20:17.978Z,1526898017.978 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T10:20:17.978Z,1526898017.978 [Default:CheckIn:C.Wait] Stopped
2018-05-21T10:20:17.978Z,1526898017.978 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T10:20:17.978Z,1526898017.978 [Default:CheckIn:D] Running Loop=1
2018-05-21T10:20:18.378Z,1526898018.378 [Default:CheckIn:D] Stopped
2018-05-21T10:20:18.378Z,1526898018.378 [Default:CheckIn:E] Running Loop=1
2018-05-21T10:20:18.779Z,1526898018.779 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 638.755599 min 
2018-05-21T10:20:18.779Z,1526898018.779 [Default:CheckIn:E] Stopped
2018-05-21T10:20:18.779Z,1526898018.779 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T10:20:18.779Z,1526898018.779 [Default:CheckIn] Stopped
2018-05-21T10:20:18.779Z,1526898018.779 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T10:20:18.779Z,1526898018.779 [Default:CheckIn](INFO): Running loop #63
2018-05-21T10:20:18.779Z,1526898018.779 [Default:CheckIn] Running Loop=63
2018-05-21T10:20:18.780Z,1526898018.780 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T10:20:18.780Z,1526898018.780 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T10:20:22.236Z,1526898022.236 [NAL9602](INFO): Powering up
2018-05-21T10:20:33.136Z,1526898033.136 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:21:05.144Z,1526898065.144 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T10:21:05.218Z,1526898065.218 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T10:21:05.218Z,1526898065.218 [NAL9602] Data Fault, FailCount= 1
2018-05-21T10:21:05.218Z,1526898065.218 [NAL9602](ERROR): Data Fault
2018-05-21T10:21:05.300Z,1526898065.300 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T10:21:05.543Z,1526898065.543 [NAL9602](INFO): Powering down
2018-05-21T10:21:06.426Z,1526898066.426 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T10:21:06.426Z,1526898066.426 [NAL9602] No Fault, FailCount= 1
2018-05-21T10:21:35.619Z,1526898095.619 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:21:46.819Z,1526898106.819 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:21:52.063Z,1526898112.063 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:21:52.063Z,1526898112.063 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T10:21:52.063Z,1526898112.063 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:21:52.076Z,1526898112.076 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:21:52.487Z,1526898112.487 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:21:52.487Z,1526898112.487 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T10:21:52.870Z,1526898112.870 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:21:52.870Z,1526898112.870 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:21:52.871Z,1526898112.871 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:23:55.434Z,1526898235.434 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T10:23:55.434Z,1526898235.434 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T10:24:35.160Z,1526898275.160 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T10:24:53.107Z,1526898293.107 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:24:53.108Z,1526898293.108 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T10:24:53.108Z,1526898293.108 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:24:53.161Z,1526898293.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:24:53.530Z,1526898293.530 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:24:53.530Z,1526898293.530 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T10:24:53.917Z,1526898293.917 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:24:53.918Z,1526898293.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:24:53.918Z,1526898293.918 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:25:19.141Z,1526898319.141 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T10:20:18.8Z
2018-05-21T10:25:19.141Z,1526898319.141 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T10:25:19.141Z,1526898319.141 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T10:25:23.296Z,1526898323.296 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0186.lzma
2018-05-21T10:25:24.088Z,1526898324.088 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0186.lzma.bak
2018-05-21T10:25:24.089Z,1526898324.089 [DataOverHttps](INFO): SBD MOMSN=8288142
2018-05-21T10:25:28.062Z,1526898328.062 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T10:25:28.062Z,1526898328.062 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T10:25:32.979Z,1526898332.979 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0187.lzma
2018-05-21T10:25:33.765Z,1526898333.765 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0187.lzma.bak
2018-05-21T10:25:33.765Z,1526898333.765 [DataOverHttps](INFO): SBD MOMSN=8288144
2018-05-21T10:25:34.503Z,1526898334.503 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T10:25:34.503Z,1526898334.503 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T10:25:34.503Z,1526898334.503 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T10:25:37.863Z,1526898337.863 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T10:26:08.355Z,1526898368.355 [NAL9602](INFO): Powering down
2018-05-21T10:27:54.044Z,1526898474.044 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:27:54.044Z,1526898474.044 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T10:27:54.044Z,1526898474.044 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:27:54.068Z,1526898474.068 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:27:54.451Z,1526898474.451 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:27:54.451Z,1526898474.451 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T10:27:54.847Z,1526898474.847 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:27:54.848Z,1526898474.848 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:27:54.848Z,1526898474.848 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:30:34.953Z,1526898634.953 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T10:30:34.953Z,1526898634.953 [Default:CheckIn:C.Wait] Stopped
2018-05-21T10:30:34.953Z,1526898634.953 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T10:30:34.953Z,1526898634.953 [Default:CheckIn:D] Running Loop=1
2018-05-21T10:30:35.358Z,1526898635.358 [Default:CheckIn:D] Stopped
2018-05-21T10:30:35.358Z,1526898635.358 [Default:CheckIn:E] Running Loop=1
2018-05-21T10:30:35.758Z,1526898635.758 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 649.038607 min 
2018-05-21T10:30:35.759Z,1526898635.759 [Default:CheckIn:E] Stopped
2018-05-21T10:30:35.759Z,1526898635.759 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T10:30:35.759Z,1526898635.759 [Default:CheckIn] Stopped
2018-05-21T10:30:35.759Z,1526898635.759 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T10:30:35.759Z,1526898635.759 [Default:CheckIn](INFO): Running loop #64
2018-05-21T10:30:35.759Z,1526898635.759 [Default:CheckIn] Running Loop=64
2018-05-21T10:30:35.759Z,1526898635.759 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T10:30:35.759Z,1526898635.759 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T10:30:39.281Z,1526898639.281 [NAL9602](INFO): Powering up
2018-05-21T10:30:50.424Z,1526898650.424 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:30:51.224Z,1526898651.224 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T10:30:51.224Z,1526898651.224 [NAL9602] Data Fault, FailCount= 2
2018-05-21T10:30:51.224Z,1526898651.224 [NAL9602](ERROR): Data Fault
2018-05-21T10:30:51.308Z,1526898651.308 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T10:30:51.623Z,1526898651.623 [NAL9602](INFO): Powering down
2018-05-21T10:30:52.493Z,1526898652.493 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T10:30:52.493Z,1526898652.493 [NAL9602] No Fault, FailCount= 2
2018-05-21T10:30:54.858Z,1526898654.858 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:30:54.858Z,1526898654.858 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T10:30:54.858Z,1526898654.858 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:30:54.895Z,1526898654.895 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:30:55.306Z,1526898655.306 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:30:55.306Z,1526898655.306 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T10:30:55.660Z,1526898655.660 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:30:55.661Z,1526898655.661 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:30:55.661Z,1526898655.661 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:31:22.024Z,1526898682.024 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:31:33.224Z,1526898693.224 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:33:55.819Z,1526898835.819 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:33:55.820Z,1526898835.820 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T10:33:55.820Z,1526898835.820 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:33:55.832Z,1526898835.832 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:33:56.230Z,1526898836.230 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:33:56.230Z,1526898836.230 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T10:33:56.622Z,1526898836.622 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:33:56.623Z,1526898836.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:33:56.623Z,1526898836.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:34:30.969Z,1526898870.969 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T10:34:30.969Z,1526898870.969 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T10:34:35.471Z,1526898875.471 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T10:34:48.145Z,1526898888.145 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T10:34:48.145Z,1526898888.145 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T10:35:10.279Z,1526898910.279 [CBIT](IMPORTANT): Beginning ground fault scan
2018-05-21T10:35:21.003Z,1526898921.003 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134503
CHAN A1 (24V): -0.003771
CHAN A2 (12V): -0.001877
CHAN A3 (5V): -0.000819
CHAN B0 (3.3V): 0.000011
CHAN B1 (3.15aV): 0.000240
CHAN B2 (3.15bV): -0.000343
CHAN B3 (GND): -0.000036
OPEN: -0.000613
Full Scale Calc: 4.765 mA, -1.589 mA
2018-05-21T10:35:35.801Z,1526898935.801 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T10:30:35.8Z
2018-05-21T10:35:35.801Z,1526898935.801 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T10:35:35.801Z,1526898935.801 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T10:35:39.808Z,1526898939.808 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0189.lzma
2018-05-21T10:35:40.608Z,1526898940.608 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0189.lzma.bak
2018-05-21T10:35:40.608Z,1526898940.608 [DataOverHttps](INFO): SBD MOMSN=8288149
2018-05-21T10:35:49.614Z,1526898949.614 [DataOverHttps](INFO): Sending 398 bytes from file Logs/20180520T234132/Express0190.lzma
2018-05-21T10:35:50.380Z,1526898950.380 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0190.lzma.bak
2018-05-21T10:35:50.380Z,1526898950.380 [DataOverHttps](INFO): SBD MOMSN=8288151
2018-05-21T10:35:51.077Z,1526898951.077 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T10:35:51.077Z,1526898951.077 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T10:35:51.078Z,1526898951.078 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T10:36:39.692Z,1526898999.692 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T10:36:56.703Z,1526899016.703 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:36:56.703Z,1526899016.703 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T10:36:56.703Z,1526899016.703 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:36:56.736Z,1526899016.736 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:36:57.147Z,1526899017.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:36:57.147Z,1526899017.147 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T10:36:57.500Z,1526899017.500 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:36:57.500Z,1526899017.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:36:57.500Z,1526899017.500 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:37:10.267Z,1526899030.267 [NAL9602](INFO): Powering down
2018-05-21T10:39:57.559Z,1526899197.559 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:39:57.559Z,1526899197.559 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T10:39:57.559Z,1526899197.559 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:39:57.584Z,1526899197.584 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:39:57.997Z,1526899197.997 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:39:57.997Z,1526899197.997 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T10:39:58.344Z,1526899198.344 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:39:58.345Z,1526899198.345 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:39:58.345Z,1526899198.345 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:40:51.556Z,1526899251.556 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T10:40:51.557Z,1526899251.557 [Default:CheckIn:C.Wait] Stopped
2018-05-21T10:40:51.557Z,1526899251.557 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T10:40:51.557Z,1526899251.557 [Default:CheckIn:D] Running Loop=1
2018-05-21T10:40:51.957Z,1526899251.957 [Default:CheckIn:D] Stopped
2018-05-21T10:40:51.957Z,1526899251.957 [Default:CheckIn:E] Running Loop=1
2018-05-21T10:40:52.357Z,1526899252.357 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 659.315234 min 
2018-05-21T10:40:52.358Z,1526899252.358 [Default:CheckIn:E] Stopped
2018-05-21T10:40:52.358Z,1526899252.358 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T10:40:52.358Z,1526899252.358 [Default:CheckIn] Stopped
2018-05-21T10:40:52.358Z,1526899252.358 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T10:40:52.358Z,1526899252.358 [Default:CheckIn](INFO): Running loop #65
2018-05-21T10:40:52.358Z,1526899252.358 [Default:CheckIn] Running Loop=65
2018-05-21T10:40:52.359Z,1526899252.359 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T10:40:52.359Z,1526899252.359 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T10:40:56.003Z,1526899256.003 [NAL9602](INFO): Powering up
2018-05-21T10:41:06.880Z,1526899266.880 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:41:38.880Z,1526899298.880 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T10:41:38.954Z,1526899298.954 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T10:41:38.954Z,1526899298.954 [NAL9602] Data Fault, FailCount= 3
2018-05-21T10:41:38.954Z,1526899298.954 [NAL9602](ERROR): Data Fault
2018-05-21T10:41:39.045Z,1526899299.045 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T10:41:39.279Z,1526899299.279 [NAL9602](INFO): Powering down
2018-05-21T10:41:40.140Z,1526899300.140 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T10:41:40.140Z,1526899300.140 [NAL9602] No Fault, FailCount= 3
2018-05-21T10:42:09.320Z,1526899329.320 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:42:20.120Z,1526899340.120 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:42:20.920Z,1526899340.920 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T10:42:20.920Z,1526899340.920 [NAL9602] Data Fault, FailCount= 4
2018-05-21T10:42:20.920Z,1526899340.920 [NAL9602](ERROR): Data Fault
2018-05-21T10:42:21.018Z,1526899341.018 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T10:42:21.319Z,1526899341.319 [NAL9602](INFO): Powering down
2018-05-21T10:42:22.171Z,1526899342.171 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T10:42:22.171Z,1526899342.171 [NAL9602] No Fault, FailCount= 4
2018-05-21T10:42:51.719Z,1526899371.719 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:42:58.551Z,1526899378.551 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:42:58.551Z,1526899378.551 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T10:42:58.551Z,1526899378.551 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:42:58.580Z,1526899378.580 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:42:58.962Z,1526899378.962 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:42:58.962Z,1526899378.962 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T10:42:59.352Z,1526899379.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:42:59.352Z,1526899379.352 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:42:59.353Z,1526899379.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:43:02.912Z,1526899382.912 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:44:35.847Z,1526899475.847 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T10:45:52.401Z,1526899552.401 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T10:40:52.4Z
2018-05-21T10:45:52.401Z,1526899552.401 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T10:45:52.401Z,1526899552.401 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T10:45:56.760Z,1526899556.760 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0192.lzma
2018-05-21T10:45:57.536Z,1526899557.536 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0192.lzma.bak
2018-05-21T10:45:57.536Z,1526899557.536 [DataOverHttps](INFO): SBD MOMSN=8288158
2018-05-21T10:46:01.672Z,1526899561.672 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:46:01.672Z,1526899561.672 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T10:46:01.672Z,1526899561.672 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:46:01.685Z,1526899561.685 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:46:01.852Z,1526899561.852 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:46:01.852Z,1526899561.852 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T10:46:02.193Z,1526899562.193 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:46:02.193Z,1526899562.193 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:46:02.194Z,1526899562.194 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:46:06.655Z,1526899566.655 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0193.lzma
2018-05-21T10:46:07.456Z,1526899567.456 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0193.lzma.bak
2018-05-21T10:46:07.456Z,1526899567.456 [DataOverHttps](INFO): SBD MOMSN=8288160
2018-05-21T10:46:08.156Z,1526899568.156 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T10:46:08.156Z,1526899568.156 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T10:46:08.156Z,1526899568.156 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T10:46:11.427Z,1526899571.427 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T10:46:41.927Z,1526899601.927 [NAL9602](INFO): Powering down
2018-05-21T10:49:02.248Z,1526899742.248 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:49:02.248Z,1526899742.248 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T10:49:02.248Z,1526899742.248 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:49:02.273Z,1526899742.273 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:49:02.669Z,1526899742.669 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:49:02.669Z,1526899742.669 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T10:49:03.055Z,1526899743.055 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:49:03.055Z,1526899743.055 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:49:03.056Z,1526899743.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:51:08.629Z,1526899868.629 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T10:51:08.630Z,1526899868.630 [Default:CheckIn:C.Wait] Stopped
2018-05-21T10:51:08.630Z,1526899868.630 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T10:51:08.630Z,1526899868.630 [Default:CheckIn:D] Running Loop=1
2018-05-21T10:51:09.031Z,1526899869.031 [Default:CheckIn:D] Stopped
2018-05-21T10:51:09.031Z,1526899869.031 [Default:CheckIn:E] Running Loop=1
2018-05-21T10:51:09.427Z,1526899869.427 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 669.599805 min 
2018-05-21T10:51:09.427Z,1526899869.427 [Default:CheckIn:E] Stopped
2018-05-21T10:51:09.428Z,1526899869.428 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T10:51:09.428Z,1526899869.428 [Default:CheckIn] Stopped
2018-05-21T10:51:09.428Z,1526899869.428 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T10:51:09.428Z,1526899869.428 [Default:CheckIn](INFO): Running loop #66
2018-05-21T10:51:09.428Z,1526899869.428 [Default:CheckIn] Running Loop=66
2018-05-21T10:51:09.428Z,1526899869.428 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T10:51:09.428Z,1526899869.428 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T10:51:12.724Z,1526899872.724 [NAL9602](INFO): Powering up
2018-05-21T10:51:23.904Z,1526899883.904 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:51:55.904Z,1526899915.904 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T10:51:55.978Z,1526899915.978 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T10:51:55.978Z,1526899915.978 [NAL9602] Data Fault, FailCount= 5
2018-05-21T10:51:55.978Z,1526899915.978 [NAL9602](ERROR): Data Fault
2018-05-21T10:51:56.038Z,1526899916.038 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T10:51:56.043Z,1526899916.043 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T10:51:56.303Z,1526899916.303 [NAL9602](INFO): Powering down
2018-05-21T10:51:56.400Z,1526899916.400 [CBIT](INFO): Critical error at 20180521T105156
2018-05-21T10:52:03.153Z,1526899923.153 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:52:03.153Z,1526899923.153 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T10:52:03.153Z,1526899923.153 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:52:03.166Z,1526899923.166 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:52:03.563Z,1526899923.563 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T10:52:03.563Z,1526899923.563 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T10:52:03.947Z,1526899923.947 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T10:52:03.947Z,1526899923.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T10:52:03.948Z,1526899923.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T10:53:56.119Z,1526900036.119 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T10:53:56.120Z,1526900036.120 [NAL9602] No Fault, FailCount= 5
2018-05-21T10:53:56.451Z,1526900036.451 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:54:07.652Z,1526900047.652 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:54:08.452Z,1526900048.452 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T10:54:08.452Z,1526900048.452 [NAL9602] Data Fault, FailCount= 1
2018-05-21T10:54:08.452Z,1526900048.452 [NAL9602](ERROR): Data Fault
2018-05-21T10:54:08.536Z,1526900048.536 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T10:54:08.851Z,1526900048.851 [NAL9602](INFO): Powering down
2018-05-21T10:54:09.716Z,1526900049.716 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T10:54:09.716Z,1526900049.716 [NAL9602] No Fault, FailCount= 1
2018-05-21T10:54:36.180Z,1526900076.180 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T10:54:38.927Z,1526900078.927 [NAL9602](INFO): Powering up NAL9602
2018-05-21T10:54:50.128Z,1526900090.128 [NAL9602](INFO): NAL9602 initialized
2018-05-21T10:55:04.179Z,1526900104.179 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T10:55:04.179Z,1526900104.179 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T10:55:04.179Z,1526900104.179 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T10:55:04.228Z,1526900104.228 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:55:04.229Z,1526900104.229 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T10:56:09.508Z,1526900169.508 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T10:51:09.4Z
2018-05-21T10:56:09.508Z,1526900169.508 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T10:56:09.509Z,1526900169.509 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T10:56:13.500Z,1526900173.500 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0195.lzma
2018-05-21T10:56:14.284Z,1526900174.284 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0195.lzma.bak
2018-05-21T10:56:14.284Z,1526900174.284 [DataOverHttps](INFO): SBD MOMSN=8288166
2018-05-21T10:56:23.348Z,1526900183.348 [DataOverHttps](INFO): Sending 310 bytes from file Logs/20180520T234132/Express0196.lzma
2018-05-21T10:56:24.148Z,1526900184.148 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0196.lzma.bak
2018-05-21T10:56:24.148Z,1526900184.148 [DataOverHttps](INFO): SBD MOMSN=8288169
2018-05-21T10:56:24.884Z,1526900184.884 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T10:56:24.884Z,1526900184.884 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T10:56:24.884Z,1526900184.884 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T10:56:28.058Z,1526900188.058 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T10:56:58.527Z,1526900218.527 [NAL9602](INFO): Powering down
2018-05-21T11:01:25.148Z,1526900485.148 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T11:01:25.148Z,1526900485.148 [Default:CheckIn:C.Wait] Stopped
2018-05-21T11:01:25.148Z,1526900485.148 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T11:01:25.148Z,1526900485.148 [Default:CheckIn:D] Running Loop=1
2018-05-21T11:01:25.548Z,1526900485.548 [Default:CheckIn:D] Stopped
2018-05-21T11:01:25.548Z,1526900485.548 [Default:CheckIn:E] Running Loop=1
2018-05-21T11:01:25.948Z,1526900485.948 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 679.875130 min 
2018-05-21T11:01:25.949Z,1526900485.949 [Default:CheckIn:E] Stopped
2018-05-21T11:01:25.949Z,1526900485.949 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T11:01:25.949Z,1526900485.949 [Default:CheckIn] Stopped
2018-05-21T11:01:25.949Z,1526900485.949 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T11:01:25.949Z,1526900485.949 [Default:CheckIn](INFO): Running loop #67
2018-05-21T11:01:25.949Z,1526900485.949 [Default:CheckIn] Running Loop=67
2018-05-21T11:01:25.949Z,1526900485.949 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T11:01:25.949Z,1526900485.949 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T11:01:29.581Z,1526900489.581 [NAL9602](INFO): Powering up
2018-05-21T11:01:40.456Z,1526900500.456 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:02:12.456Z,1526900532.456 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T11:02:12.539Z,1526900532.539 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T11:02:12.539Z,1526900532.539 [NAL9602] Data Fault, FailCount= 2
2018-05-21T11:02:12.539Z,1526900532.539 [NAL9602](ERROR): Data Fault
2018-05-21T11:02:12.634Z,1526900532.634 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T11:02:12.855Z,1526900532.855 [NAL9602](INFO): Powering down
2018-05-21T11:02:13.697Z,1526900533.697 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T11:02:13.697Z,1526900533.697 [NAL9602] No Fault, FailCount= 2
2018-05-21T11:02:43.056Z,1526900563.056 [NAL9602](INFO): Powering up NAL9602
2018-05-21T11:02:54.256Z,1526900574.256 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:04:36.383Z,1526900676.383 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T11:06:26.054Z,1526900786.054 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T11:01:25.9Z
2018-05-21T11:06:26.054Z,1526900786.054 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T11:06:26.054Z,1526900786.054 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T11:06:30.206Z,1526900790.206 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0198.lzma
2018-05-21T11:06:31.008Z,1526900791.008 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0198.lzma.bak
2018-05-21T11:06:31.008Z,1526900791.008 [DataOverHttps](INFO): SBD MOMSN=8288176
2018-05-21T11:06:39.969Z,1526900799.969 [DataOverHttps](INFO): Sending 242 bytes from file Logs/20180520T234132/Express0199.lzma
2018-05-21T11:06:40.752Z,1526900800.752 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0199.lzma.bak
2018-05-21T11:06:40.752Z,1526900800.752 [DataOverHttps](INFO): SBD MOMSN=8288178
2018-05-21T11:06:41.460Z,1526900801.460 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T11:06:41.460Z,1526900801.460 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T11:06:41.460Z,1526900801.460 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T11:06:44.755Z,1526900804.755 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T11:07:15.227Z,1526900835.227 [NAL9602](INFO): Powering down
2018-05-21T11:10:04.547Z,1526901004.547 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:10:04.547Z,1526901004.547 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T11:10:04.923Z,1526901004.923 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:10:04.923Z,1526901004.923 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:10:04.924Z,1526901004.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:11:41.909Z,1526901101.909 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T11:11:41.910Z,1526901101.910 [Default:CheckIn:C.Wait] Stopped
2018-05-21T11:11:41.910Z,1526901101.910 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T11:11:41.910Z,1526901101.910 [Default:CheckIn:D] Running Loop=1
2018-05-21T11:11:42.311Z,1526901102.311 [Default:CheckIn:D] Stopped
2018-05-21T11:11:42.311Z,1526901102.311 [Default:CheckIn:E] Running Loop=1
2018-05-21T11:11:42.717Z,1526901102.717 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 690.154492 min 
2018-05-21T11:11:42.717Z,1526901102.717 [Default:CheckIn:E] Stopped
2018-05-21T11:11:42.718Z,1526901102.718 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T11:11:42.718Z,1526901102.718 [Default:CheckIn] Stopped
2018-05-21T11:11:42.718Z,1526901102.718 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T11:11:42.718Z,1526901102.718 [Default:CheckIn](INFO): Running loop #68
2018-05-21T11:11:42.718Z,1526901102.718 [Default:CheckIn] Running Loop=68
2018-05-21T11:11:42.718Z,1526901102.718 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T11:11:42.718Z,1526901102.718 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T11:11:45.885Z,1526901105.885 [NAL9602](INFO): Powering up
2018-05-21T11:11:57.036Z,1526901117.036 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:11:57.836Z,1526901117.836 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T11:11:57.836Z,1526901117.836 [NAL9602] Data Fault, FailCount= 3
2018-05-21T11:11:57.836Z,1526901117.836 [NAL9602](ERROR): Data Fault
2018-05-21T11:11:57.916Z,1526901117.916 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T11:11:58.235Z,1526901118.235 [NAL9602](INFO): Powering down
2018-05-21T11:11:59.090Z,1526901119.090 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T11:11:59.090Z,1526901119.090 [NAL9602] No Fault, FailCount= 3
2018-05-21T11:12:28.635Z,1526901148.635 [NAL9602](INFO): Powering up NAL9602
2018-05-21T11:12:39.840Z,1526901159.840 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:13:05.154Z,1526901185.154 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:13:05.154Z,1526901185.154 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T11:13:05.155Z,1526901185.155 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:13:05.168Z,1526901185.168 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:13:05.565Z,1526901185.565 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:13:05.565Z,1526901185.565 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T11:13:05.956Z,1526901185.956 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:13:05.957Z,1526901185.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:13:05.957Z,1526901185.957 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:14:36.455Z,1526901276.455 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T11:16:06.119Z,1526901366.119 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:16:06.119Z,1526901366.119 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T11:16:06.119Z,1526901366.119 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:16:06.131Z,1526901366.131 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:16:06.539Z,1526901366.539 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:16:06.540Z,1526901366.540 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T11:16:06.925Z,1526901366.925 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:16:06.925Z,1526901366.925 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:16:06.926Z,1526901366.926 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:16:42.931Z,1526901402.931 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T11:11:42.7Z
2018-05-21T11:16:42.931Z,1526901402.931 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T11:16:42.931Z,1526901402.931 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T11:16:46.944Z,1526901406.944 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0201.lzma
2018-05-21T11:16:47.720Z,1526901407.720 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0201.lzma.bak
2018-05-21T11:16:47.720Z,1526901407.720 [DataOverHttps](INFO): SBD MOMSN=8288183
2018-05-21T11:16:56.741Z,1526901416.741 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0202.lzma
2018-05-21T11:16:57.528Z,1526901417.528 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0202.lzma.bak
2018-05-21T11:16:57.528Z,1526901417.528 [DataOverHttps](INFO): SBD MOMSN=8288185
2018-05-21T11:16:58.242Z,1526901418.242 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T11:16:58.242Z,1526901418.242 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T11:16:58.242Z,1526901418.242 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T11:17:46.463Z,1526901466.463 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T11:18:17.051Z,1526901497.051 [NAL9602](INFO): Powering down
2018-05-21T11:19:07.096Z,1526901547.096 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:19:07.097Z,1526901547.097 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T11:19:07.097Z,1526901547.097 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:19:07.109Z,1526901547.109 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:19:07.516Z,1526901547.516 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:19:07.516Z,1526901547.516 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T11:19:07.909Z,1526901547.909 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:19:07.910Z,1526901547.910 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:19:07.911Z,1526901547.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:21:58.742Z,1526901718.742 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T11:21:58.742Z,1526901718.742 [Default:CheckIn:C.Wait] Stopped
2018-05-21T11:21:58.742Z,1526901718.742 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T11:21:58.742Z,1526901718.742 [Default:CheckIn:D] Running Loop=1
2018-05-21T11:21:59.143Z,1526901719.143 [Default:CheckIn:D] Stopped
2018-05-21T11:21:59.143Z,1526901719.143 [Default:CheckIn:E] Running Loop=1
2018-05-21T11:21:59.550Z,1526901719.550 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 700.435026 min 
2018-05-21T11:21:59.550Z,1526901719.550 [Default:CheckIn:E] Stopped
2018-05-21T11:21:59.550Z,1526901719.550 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T11:21:59.550Z,1526901719.550 [Default:CheckIn] Stopped
2018-05-21T11:21:59.550Z,1526901719.550 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T11:21:59.551Z,1526901719.551 [Default:CheckIn](INFO): Running loop #69
2018-05-21T11:21:59.551Z,1526901719.551 [Default:CheckIn] Running Loop=69
2018-05-21T11:21:59.551Z,1526901719.551 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T11:21:59.551Z,1526901719.551 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T11:22:02.731Z,1526901722.731 [NAL9602](INFO): Powering up
2018-05-21T11:22:07.959Z,1526901727.959 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:22:07.959Z,1526901727.959 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T11:22:07.959Z,1526901727.959 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:22:07.972Z,1526901727.972 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:22:08.391Z,1526901728.391 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:22:08.391Z,1526901728.391 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T11:22:08.745Z,1526901728.745 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:22:08.746Z,1526901728.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:22:08.746Z,1526901728.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:22:13.912Z,1526901733.912 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:22:45.912Z,1526901765.912 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T11:22:45.990Z,1526901765.990 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T11:22:45.990Z,1526901765.990 [NAL9602] Data Fault, FailCount= 4
2018-05-21T11:22:45.990Z,1526901765.990 [NAL9602](ERROR): Data Fault
2018-05-21T11:22:46.048Z,1526901766.048 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T11:22:46.319Z,1526901766.319 [NAL9602](INFO): Powering down
2018-05-21T11:22:47.174Z,1526901767.174 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T11:22:47.174Z,1526901767.174 [NAL9602] No Fault, FailCount= 4
2018-05-21T11:23:16.324Z,1526901796.324 [NAL9602](INFO): Powering up NAL9602
2018-05-21T11:23:27.523Z,1526901807.523 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:23:28.324Z,1526901808.324 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T11:23:28.324Z,1526901808.324 [NAL9602] Data Fault, FailCount= 5
2018-05-21T11:23:28.324Z,1526901808.324 [NAL9602](ERROR): Data Fault
2018-05-21T11:23:28.413Z,1526901808.413 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T11:23:28.414Z,1526901808.414 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T11:23:28.723Z,1526901808.723 [NAL9602](INFO): Powering down
2018-05-21T11:23:28.794Z,1526901808.794 [CBIT](INFO): Critical error at 20180521T112328
2018-05-21T11:24:36.829Z,1526901876.829 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T11:25:08.772Z,1526901908.772 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:25:08.772Z,1526901908.772 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T11:25:08.772Z,1526901908.772 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:25:08.815Z,1526901908.815 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:25:09.219Z,1526901909.219 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:25:09.219Z,1526901909.219 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T11:25:09.622Z,1526901909.622 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:25:09.622Z,1526901909.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:25:09.623Z,1526901909.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:25:28.399Z,1526901928.399 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T11:25:28.399Z,1526901928.399 [NAL9602] No Fault, FailCount= 5
2018-05-21T11:25:28.723Z,1526901928.723 [NAL9602](INFO): Powering up NAL9602
2018-05-21T11:25:39.916Z,1526901939.916 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:26:59.935Z,1526902019.935 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T11:21:59.6Z
2018-05-21T11:26:59.935Z,1526902019.935 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T11:26:59.935Z,1526902019.935 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T11:27:03.744Z,1526902023.744 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0204.lzma
2018-05-21T11:27:04.544Z,1526902024.544 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0204.lzma.bak
2018-05-21T11:27:04.544Z,1526902024.544 [DataOverHttps](INFO): SBD MOMSN=8288190
2018-05-21T11:27:13.369Z,1526902033.369 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0205.lzma
2018-05-21T11:27:14.160Z,1526902034.160 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0205.lzma.bak
2018-05-21T11:27:14.160Z,1526902034.160 [DataOverHttps](INFO): SBD MOMSN=8288193
2018-05-21T11:27:14.869Z,1526902034.869 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T11:27:14.869Z,1526902034.869 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T11:27:14.869Z,1526902034.869 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T11:27:18.134Z,1526902038.134 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T11:27:48.631Z,1526902068.631 [NAL9602](INFO): Powering down
2018-05-21T11:28:09.884Z,1526902089.884 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:28:09.884Z,1526902089.884 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T11:28:09.884Z,1526902089.884 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:28:09.909Z,1526902089.909 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:28:10.294Z,1526902090.294 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:28:10.294Z,1526902090.294 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T11:28:10.673Z,1526902090.673 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:28:10.674Z,1526902090.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:28:10.674Z,1526902090.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:31:10.811Z,1526902270.811 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:31:10.811Z,1526902270.811 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T11:31:10.811Z,1526902270.811 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:31:10.836Z,1526902270.836 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:31:11.240Z,1526902271.240 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:31:11.240Z,1526902271.240 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T11:31:11.592Z,1526902271.592 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:31:11.593Z,1526902271.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:31:11.593Z,1526902271.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:32:15.228Z,1526902335.228 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T11:32:15.229Z,1526902335.229 [Default:CheckIn:C.Wait] Stopped
2018-05-21T11:32:15.229Z,1526902335.229 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T11:32:15.229Z,1526902335.229 [Default:CheckIn:D] Running Loop=1
2018-05-21T11:32:15.625Z,1526902335.625 [Default:CheckIn:D] Stopped
2018-05-21T11:32:15.625Z,1526902335.625 [Default:CheckIn:E] Running Loop=1
2018-05-21T11:32:16.037Z,1526902336.037 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 710.709701 min 
2018-05-21T11:32:16.037Z,1526902336.037 [Default:CheckIn:E] Stopped
2018-05-21T11:32:16.038Z,1526902336.038 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T11:32:16.038Z,1526902336.038 [Default:CheckIn] Stopped
2018-05-21T11:32:16.038Z,1526902336.038 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T11:32:16.040Z,1526902336.040 [Default:CheckIn](INFO): Running loop #70
2018-05-21T11:32:16.040Z,1526902336.040 [Default:CheckIn] Running Loop=70
2018-05-21T11:32:16.040Z,1526902336.040 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T11:32:16.040Z,1526902336.040 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T11:32:19.282Z,1526902339.282 [NAL9602](INFO): Powering up
2018-05-21T11:32:30.452Z,1526902350.452 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:33:02.452Z,1526902382.452 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T11:33:02.534Z,1526902382.534 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T11:33:02.534Z,1526902382.534 [NAL9602] Data Fault, FailCount= 1
2018-05-21T11:33:02.534Z,1526902382.534 [NAL9602](ERROR): Data Fault
2018-05-21T11:33:02.606Z,1526902382.606 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T11:33:02.851Z,1526902382.851 [NAL9602](INFO): Powering down
2018-05-21T11:33:03.727Z,1526902383.727 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T11:33:03.727Z,1526902383.727 [NAL9602] No Fault, FailCount= 1
2018-05-21T11:33:32.907Z,1526902412.907 [NAL9602](INFO): Powering up NAL9602
2018-05-21T11:33:44.108Z,1526902424.108 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:34:11.748Z,1526902451.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:34:11.748Z,1526902451.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T11:34:11.748Z,1526902451.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:34:11.760Z,1526902451.760 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:34:12.161Z,1526902452.161 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:34:12.161Z,1526902452.161 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T11:34:12.562Z,1526902452.562 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:34:12.563Z,1526902452.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:34:12.563Z,1526902452.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:34:37.145Z,1526902477.145 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T11:37:12.708Z,1526902632.708 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:37:12.708Z,1526902632.708 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T11:37:12.708Z,1526902632.708 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:37:12.737Z,1526902632.737 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:37:13.114Z,1526902633.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:37:13.114Z,1526902633.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T11:37:13.505Z,1526902633.505 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:37:13.506Z,1526902633.506 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:37:13.506Z,1526902633.506 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:37:16.327Z,1526902636.327 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T11:32:16.0Z
2018-05-21T11:37:16.327Z,1526902636.327 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T11:37:16.327Z,1526902636.327 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T11:37:20.331Z,1526902640.331 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0207.lzma
2018-05-21T11:37:21.112Z,1526902641.112 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0207.lzma.bak
2018-05-21T11:37:21.112Z,1526902641.112 [DataOverHttps](INFO): SBD MOMSN=8288199
2018-05-21T11:37:30.093Z,1526902650.093 [DataOverHttps](INFO): Sending 237 bytes from file Logs/20180520T234132/Express0208.lzma
2018-05-21T11:37:30.884Z,1526902650.884 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0208.lzma.bak
2018-05-21T11:37:30.884Z,1526902650.884 [DataOverHttps](INFO): SBD MOMSN=8288201
2018-05-21T11:37:31.589Z,1526902651.589 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T11:37:31.589Z,1526902651.589 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T11:37:31.589Z,1526902651.589 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T11:37:35.052Z,1526902655.052 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T11:38:05.523Z,1526902685.523 [NAL9602](INFO): Powering down
2018-05-21T11:40:13.786Z,1526902813.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:40:13.787Z,1526902813.787 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T11:40:13.787Z,1526902813.787 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:40:13.800Z,1526902813.800 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:40:14.201Z,1526902814.201 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:40:14.201Z,1526902814.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T11:40:14.591Z,1526902814.591 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:40:14.592Z,1526902814.592 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:40:14.592Z,1526902814.592 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:42:31.826Z,1526902951.826 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T11:42:31.826Z,1526902951.826 [Default:CheckIn:C.Wait] Stopped
2018-05-21T11:42:31.826Z,1526902951.826 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T11:42:31.827Z,1526902951.827 [Default:CheckIn:D] Running Loop=1
2018-05-21T11:42:32.245Z,1526902952.245 [Default:CheckIn:D] Stopped
2018-05-21T11:42:32.245Z,1526902952.245 [Default:CheckIn:E] Running Loop=1
2018-05-21T11:42:32.636Z,1526902952.636 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 720.986719 min 
2018-05-21T11:42:32.636Z,1526902952.636 [Default:CheckIn:E] Stopped
2018-05-21T11:42:32.636Z,1526902952.636 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T11:42:32.636Z,1526902952.636 [Default:CheckIn] Stopped
2018-05-21T11:42:32.636Z,1526902952.636 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T11:42:32.636Z,1526902952.636 [Default:CheckIn](INFO): Running loop #71
2018-05-21T11:42:32.636Z,1526902952.636 [Default:CheckIn] Running Loop=71
2018-05-21T11:42:32.637Z,1526902952.637 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T11:42:32.637Z,1526902952.637 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T11:42:33.378Z,1526902953.378 [NAL9602](INFO): Powering up
2018-05-21T11:42:44.343Z,1526902964.343 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:42:45.136Z,1526902965.136 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T11:42:45.136Z,1526902965.136 [NAL9602] Data Fault, FailCount= 2
2018-05-21T11:42:45.136Z,1526902965.136 [NAL9602](ERROR): Data Fault
2018-05-21T11:42:45.217Z,1526902965.217 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T11:42:45.535Z,1526902965.535 [NAL9602](INFO): Powering down
2018-05-21T11:42:46.387Z,1526902966.387 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T11:42:46.387Z,1526902966.387 [NAL9602] No Fault, FailCount= 2
2018-05-21T11:43:14.775Z,1526902994.775 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:43:14.775Z,1526902994.775 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T11:43:14.775Z,1526902994.775 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:43:14.788Z,1526902994.788 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:43:15.187Z,1526902995.187 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:43:15.187Z,1526902995.187 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T11:43:15.578Z,1526902995.578 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:43:15.579Z,1526902995.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:43:15.579Z,1526902995.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:43:15.935Z,1526902995.935 [NAL9602](INFO): Powering up NAL9602
2018-05-21T11:43:27.135Z,1526903007.135 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:44:37.209Z,1526903077.209 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T11:46:15.807Z,1526903175.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:46:15.807Z,1526903175.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T11:46:15.807Z,1526903175.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:46:15.835Z,1526903175.835 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:46:16.211Z,1526903176.211 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:46:16.212Z,1526903176.212 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T11:46:16.598Z,1526903176.598 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:46:16.598Z,1526903176.598 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:46:16.599Z,1526903176.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:47:32.832Z,1526903252.832 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T11:42:32.6Z
2018-05-21T11:47:32.832Z,1526903252.832 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T11:47:32.832Z,1526903252.832 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T11:47:37.168Z,1526903257.168 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0210.lzma
2018-05-21T11:47:37.968Z,1526903257.968 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0210.lzma.bak
2018-05-21T11:47:37.968Z,1526903257.968 [DataOverHttps](INFO): SBD MOMSN=8288206
2018-05-21T11:47:47.052Z,1526903267.052 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0211.lzma
2018-05-21T11:47:47.852Z,1526903267.852 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0211.lzma.bak
2018-05-21T11:47:47.852Z,1526903267.852 [DataOverHttps](INFO): SBD MOMSN=8288208
2018-05-21T11:47:48.560Z,1526903268.560 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T11:47:48.560Z,1526903268.560 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T11:47:48.560Z,1526903268.560 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T11:48:31.124Z,1526903311.124 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T11:49:01.583Z,1526903341.583 [NAL9602](INFO): Powering down
2018-05-21T11:49:16.827Z,1526903356.827 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:49:16.827Z,1526903356.827 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T11:49:16.827Z,1526903356.827 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:49:16.871Z,1526903356.871 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:49:17.234Z,1526903357.234 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:49:17.234Z,1526903357.234 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T11:49:17.623Z,1526903357.623 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:49:17.624Z,1526903357.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:49:17.624Z,1526903357.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:52:17.786Z,1526903537.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:52:17.786Z,1526903537.786 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T11:52:17.786Z,1526903537.786 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:52:17.799Z,1526903537.799 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:52:18.201Z,1526903538.201 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:52:18.201Z,1526903538.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T11:52:18.586Z,1526903538.586 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:52:18.587Z,1526903538.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:52:18.587Z,1526903538.587 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:52:48.987Z,1526903568.987 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T11:52:48.987Z,1526903568.987 [Default:CheckIn:C.Wait] Stopped
2018-05-21T11:52:48.987Z,1526903568.987 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T11:52:48.987Z,1526903568.987 [Default:CheckIn:D] Running Loop=1
2018-05-21T11:52:49.393Z,1526903569.393 [Default:CheckIn:D] Stopped
2018-05-21T11:52:49.393Z,1526903569.393 [Default:CheckIn:E] Running Loop=1
2018-05-21T11:52:49.793Z,1526903569.793 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 731.272526 min 
2018-05-21T11:52:49.794Z,1526903569.794 [Default:CheckIn:E] Stopped
2018-05-21T11:52:49.794Z,1526903569.794 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T11:52:49.794Z,1526903569.794 [Default:CheckIn] Stopped
2018-05-21T11:52:49.794Z,1526903569.794 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T11:52:49.794Z,1526903569.794 [Default:CheckIn](INFO): Running loop #72
2018-05-21T11:52:49.794Z,1526903569.794 [Default:CheckIn] Running Loop=72
2018-05-21T11:52:49.795Z,1526903569.795 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T11:52:49.795Z,1526903569.795 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T11:52:53.364Z,1526903573.364 [NAL9602](INFO): Powering up
2018-05-21T11:53:04.264Z,1526903584.264 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:53:36.264Z,1526903616.264 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T11:53:36.338Z,1526903616.338 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T11:53:36.338Z,1526903616.338 [NAL9602] Data Fault, FailCount= 3
2018-05-21T11:53:36.338Z,1526903616.338 [NAL9602](ERROR): Data Fault
2018-05-21T11:53:36.435Z,1526903616.435 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T11:53:36.668Z,1526903616.668 [NAL9602](INFO): Powering down
2018-05-21T11:53:37.563Z,1526903617.563 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T11:53:37.564Z,1526903617.564 [NAL9602] No Fault, FailCount= 3
2018-05-21T11:54:07.035Z,1526903647.035 [NAL9602](INFO): Powering up NAL9602
2018-05-21T11:54:18.236Z,1526903658.236 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:54:19.040Z,1526903659.040 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T11:54:19.040Z,1526903659.040 [NAL9602] Data Fault, FailCount= 4
2018-05-21T11:54:19.040Z,1526903659.040 [NAL9602](ERROR): Data Fault
2018-05-21T11:54:19.125Z,1526903659.125 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T11:54:19.439Z,1526903659.439 [NAL9602](INFO): Powering down
2018-05-21T11:54:20.299Z,1526903660.299 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T11:54:20.299Z,1526903660.299 [NAL9602] No Fault, FailCount= 4
2018-05-21T11:54:37.495Z,1526903677.495 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T11:54:49.835Z,1526903689.835 [NAL9602](INFO): Powering up NAL9602
2018-05-21T11:55:01.020Z,1526903701.020 [NAL9602](INFO): NAL9602 initialized
2018-05-21T11:55:18.680Z,1526903718.680 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:55:18.680Z,1526903718.680 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T11:55:18.680Z,1526903718.680 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:55:18.781Z,1526903718.781 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:55:19.201Z,1526903719.201 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:55:19.201Z,1526903719.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T11:55:19.490Z,1526903719.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:55:19.491Z,1526903719.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:55:19.491Z,1526903719.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:57:49.799Z,1526903869.799 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T11:52:49.8Z
2018-05-21T11:57:49.799Z,1526903869.799 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T11:57:49.799Z,1526903869.799 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T11:57:54.218Z,1526903874.218 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0213.lzma
2018-05-21T11:57:55.020Z,1526903875.020 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0213.lzma.bak
2018-05-21T11:57:55.020Z,1526903875.020 [DataOverHttps](INFO): SBD MOMSN=8288213
2018-05-21T11:58:04.143Z,1526903884.143 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0214.lzma
2018-05-21T11:58:04.937Z,1526903884.937 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0214.lzma.bak
2018-05-21T11:58:04.937Z,1526903884.937 [DataOverHttps](INFO): SBD MOMSN=8288215
2018-05-21T11:58:05.632Z,1526903885.632 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T11:58:05.632Z,1526903885.632 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T11:58:05.632Z,1526903885.632 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T11:58:08.847Z,1526903888.847 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T11:58:09.395Z,1526903889.395 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.374483 seconds old.
2018-05-21T11:58:09.397Z,1526903889.397 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.374908 seconds old.
2018-05-21T11:58:09.791Z,1526903889.791 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.771148 seconds old.
2018-05-21T11:58:09.793Z,1526903889.793 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.771561 seconds old.
2018-05-21T11:58:10.221Z,1526903890.221 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.201159 seconds old.
2018-05-21T11:58:10.224Z,1526903890.224 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.201811 seconds old.
2018-05-21T11:58:19.828Z,1526903899.828 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T11:58:19.828Z,1526903899.828 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T11:58:19.828Z,1526903899.828 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T11:58:19.841Z,1526903899.841 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T11:58:20.206Z,1526903900.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T11:58:20.206Z,1526903900.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T11:58:20.598Z,1526903900.598 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T11:58:20.599Z,1526903900.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T11:58:20.599Z,1526903900.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T11:58:39.351Z,1526903919.351 [NAL9602](INFO): Powering down
2018-05-21T12:01:20.648Z,1526904080.648 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:01:20.648Z,1526904080.648 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T12:01:20.648Z,1526904080.648 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:01:20.660Z,1526904080.660 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:01:21.062Z,1526904081.062 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:01:21.062Z,1526904081.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T12:01:21.455Z,1526904081.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:01:21.455Z,1526904081.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:01:21.456Z,1526904081.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:02:33.053Z,1526904153.053 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T12:02:33.053Z,1526904153.053 [BPC1] Communications Fault, FailCount= 1
2018-05-21T12:02:33.053Z,1526904153.053 [BPC1](ERROR): Communications Fault
2018-05-21T12:02:33.076Z,1526904153.076 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T12:02:34.286Z,1526904154.286 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T12:02:34.286Z,1526904154.286 [BPC1] No Fault, FailCount= 1
2018-05-21T12:03:05.866Z,1526904185.866 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T12:03:05.866Z,1526904185.866 [Default:CheckIn:C.Wait] Stopped
2018-05-21T12:03:05.866Z,1526904185.866 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T12:03:05.867Z,1526904185.867 [Default:CheckIn:D] Running Loop=1
2018-05-21T12:03:06.274Z,1526904186.274 [Default:CheckIn:D] Stopped
2018-05-21T12:03:06.274Z,1526904186.274 [Default:CheckIn:E] Running Loop=1
2018-05-21T12:03:06.677Z,1526904186.677 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 741.553906 min 
2018-05-21T12:03:06.677Z,1526904186.677 [Default:CheckIn:E] Stopped
2018-05-21T12:03:06.677Z,1526904186.677 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T12:03:06.677Z,1526904186.677 [Default:CheckIn] Stopped
2018-05-21T12:03:06.677Z,1526904186.677 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T12:03:06.678Z,1526904186.678 [Default:CheckIn](INFO): Running loop #73
2018-05-21T12:03:06.678Z,1526904186.678 [Default:CheckIn] Running Loop=73
2018-05-21T12:03:06.678Z,1526904186.678 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T12:03:06.678Z,1526904186.678 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T12:03:09.863Z,1526904189.863 [NAL9602](INFO): Powering up
2018-05-21T12:03:21.048Z,1526904201.048 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:03:53.044Z,1526904233.044 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T12:03:53.126Z,1526904233.126 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T12:03:53.126Z,1526904233.126 [NAL9602] Data Fault, FailCount= 5
2018-05-21T12:03:53.126Z,1526904233.126 [NAL9602](ERROR): Data Fault
2018-05-21T12:03:53.229Z,1526904233.229 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T12:03:53.229Z,1526904233.229 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T12:03:53.443Z,1526904233.443 [NAL9602](INFO): Powering down
2018-05-21T12:03:53.517Z,1526904233.517 [CBIT](INFO): Critical error at 20180521T120353
2018-05-21T12:04:21.521Z,1526904261.521 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:04:21.521Z,1526904261.521 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T12:04:21.521Z,1526904261.521 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:04:21.534Z,1526904261.534 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:04:21.944Z,1526904261.944 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:04:21.944Z,1526904261.944 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T12:04:22.331Z,1526904262.331 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:04:22.332Z,1526904262.332 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:04:22.332Z,1526904262.332 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:04:37.535Z,1526904277.535 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T12:05:53.461Z,1526904353.461 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T12:05:53.461Z,1526904353.461 [NAL9602] No Fault, FailCount= 5
2018-05-21T12:05:53.792Z,1526904353.792 [NAL9602](INFO): Powering up NAL9602
2018-05-21T12:06:04.591Z,1526904364.591 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:06:05.392Z,1526904365.392 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T12:06:05.392Z,1526904365.392 [NAL9602] Data Fault, FailCount= 1
2018-05-21T12:06:05.392Z,1526904365.392 [NAL9602](ERROR): Data Fault
2018-05-21T12:06:05.510Z,1526904365.510 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T12:06:05.792Z,1526904365.792 [NAL9602](INFO): Powering down
2018-05-21T12:06:06.655Z,1526904366.655 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T12:06:06.655Z,1526904366.655 [NAL9602] No Fault, FailCount= 1
2018-05-21T12:06:36.176Z,1526904396.176 [NAL9602](INFO): Powering up NAL9602
2018-05-21T12:06:46.979Z,1526904406.979 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:07:22.346Z,1526904442.346 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:07:22.346Z,1526904442.346 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T12:07:22.346Z,1526904442.346 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:07:22.395Z,1526904442.395 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:07:22.723Z,1526904442.723 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:07:22.723Z,1526904442.723 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T12:07:23.150Z,1526904443.150 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:07:23.153Z,1526904443.153 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:07:23.153Z,1526904443.153 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:08:06.713Z,1526904486.713 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T12:03:06.7Z
2018-05-21T12:08:06.713Z,1526904486.713 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T12:08:06.713Z,1526904486.713 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T12:08:10.841Z,1526904490.841 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0216.lzma
2018-05-21T12:08:11.640Z,1526904491.640 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0216.lzma.bak
2018-05-21T12:08:11.640Z,1526904491.640 [DataOverHttps](INFO): SBD MOMSN=8288221
2018-05-21T12:08:20.565Z,1526904500.565 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180520T234132/Express0217.lzma
2018-05-21T12:08:21.364Z,1526904501.364 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0217.lzma.bak
2018-05-21T12:08:21.364Z,1526904501.364 [DataOverHttps](INFO): SBD MOMSN=8288224
2018-05-21T12:08:22.075Z,1526904502.075 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T12:08:22.075Z,1526904502.075 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T12:08:22.076Z,1526904502.076 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T12:08:25.276Z,1526904505.276 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T12:08:55.789Z,1526904535.789 [NAL9602](INFO): Powering down
2018-05-21T12:09:30.603Z,1526904570.603 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.392571 seconds old.
2018-05-21T12:09:30.605Z,1526904570.605 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.392985 seconds old.
2018-05-21T12:09:31.006Z,1526904571.006 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.795788 seconds old.
2018-05-21T12:09:31.009Z,1526904571.009 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.796200 seconds old.
2018-05-21T12:09:31.402Z,1526904571.402 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.191234 seconds old.
2018-05-21T12:09:31.404Z,1526904571.404 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.191715 seconds old.
2018-05-21T12:09:31.810Z,1526904571.810 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.599783 seconds old.
2018-05-21T12:09:31.813Z,1526904571.813 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.600200 seconds old.
2018-05-21T12:10:26.167Z,1526904626.167 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:10:26.167Z,1526904626.167 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T12:10:26.167Z,1526904626.167 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:10:26.179Z,1526904626.179 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:10:26.180Z,1526904626.180 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:11:49.019Z,1526904709.019 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T12:11:49.020Z,1526904709.020 [BPC1] Communications Fault, FailCount= 2
2018-05-21T12:11:49.020Z,1526904709.020 [BPC1](ERROR): Communications Fault
2018-05-21T12:11:49.097Z,1526904709.097 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T12:11:50.266Z,1526904710.266 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T12:11:50.267Z,1526904710.267 [BPC1] No Fault, FailCount= 2
2018-05-21T12:13:22.269Z,1526904802.269 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T12:13:22.269Z,1526904802.269 [Default:CheckIn:C.Wait] Stopped
2018-05-21T12:13:22.269Z,1526904802.269 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T12:13:22.269Z,1526904802.269 [Default:CheckIn:D] Running Loop=1
2018-05-21T12:13:22.646Z,1526904802.646 [Default:CheckIn:D] Stopped
2018-05-21T12:13:22.646Z,1526904802.646 [Default:CheckIn:E] Running Loop=1
2018-05-21T12:13:23.015Z,1526904803.015 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 751.826758 min 
2018-05-21T12:13:23.015Z,1526904803.015 [Default:CheckIn:E] Stopped
2018-05-21T12:13:23.015Z,1526904803.015 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T12:13:23.015Z,1526904803.015 [Default:CheckIn] Stopped
2018-05-21T12:13:23.015Z,1526904803.015 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T12:13:23.016Z,1526904803.016 [Default:CheckIn](INFO): Running loop #74
2018-05-21T12:13:23.016Z,1526904803.016 [Default:CheckIn] Running Loop=74
2018-05-21T12:13:23.016Z,1526904803.016 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T12:13:23.016Z,1526904803.016 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T12:13:23.768Z,1526904803.768 [NAL9602](INFO): Powering up
2018-05-21T12:13:34.655Z,1526904814.655 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:14:06.648Z,1526904846.648 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T12:14:06.730Z,1526904846.730 [NAL9602](FAULT): received: 
+CSQ:1

OK56, 2, 0, 0, 0

OK
2018-05-21T12:14:06.730Z,1526904846.730 [NAL9602] Data Fault, FailCount= 2
2018-05-21T12:14:06.730Z,1526904846.730 [NAL9602](ERROR): Data Fault
2018-05-21T12:14:06.833Z,1526904846.833 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T12:14:07.047Z,1526904847.047 [NAL9602](INFO): Powering down
2018-05-21T12:14:07.900Z,1526904847.900 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T12:14:07.900Z,1526904847.900 [NAL9602] No Fault, FailCount= 2
2018-05-21T12:14:37.227Z,1526904877.227 [NAL9602](INFO): Powering up NAL9602
2018-05-21T12:14:37.679Z,1526904877.679 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T12:14:48.427Z,1526904888.427 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:17:55.693Z,1526905075.693 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:17:55.693Z,1526905075.693 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:18:23.336Z,1526905103.336 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T12:13:23.0Z
2018-05-21T12:18:23.336Z,1526905103.336 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T12:18:23.336Z,1526905103.336 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T12:18:27.836Z,1526905107.836 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:18:27.836Z,1526905107.836 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:18:27.950Z,1526905107.950 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0219.lzma
2018-05-21T12:18:28.752Z,1526905108.752 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0219.lzma.bak
2018-05-21T12:18:28.752Z,1526905108.752 [DataOverHttps](INFO): SBD MOMSN=8288230
2018-05-21T12:18:37.588Z,1526905117.588 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T12:18:37.726Z,1526905117.726 [DataOverHttps](INFO): Sending 294 bytes from file Logs/20180520T234132/Express0220.lzma
2018-05-21T12:18:38.529Z,1526905118.529 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0220.lzma.bak
2018-05-21T12:18:38.529Z,1526905118.529 [DataOverHttps](INFO): SBD MOMSN=8288232
2018-05-21T12:18:39.245Z,1526905119.245 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T12:18:39.245Z,1526905119.245 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T12:18:39.245Z,1526905119.245 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T12:19:08.120Z,1526905148.120 [NAL9602](INFO): Powering down
2018-05-21T12:21:53.201Z,1526905313.201 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T12:21:53.201Z,1526905313.201 [BPC1] Communications Fault, FailCount= 3
2018-05-21T12:21:53.201Z,1526905313.201 [BPC1](ERROR): Communications Fault
2018-05-21T12:21:53.252Z,1526905313.252 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T12:21:54.423Z,1526905314.423 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T12:21:54.423Z,1526905314.423 [BPC1] No Fault, FailCount= 3
2018-05-21T12:23:39.610Z,1526905419.610 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T12:23:39.610Z,1526905419.610 [Default:CheckIn:C.Wait] Stopped
2018-05-21T12:23:39.610Z,1526905419.610 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T12:23:39.610Z,1526905419.610 [Default:CheckIn:D] Running Loop=1
2018-05-21T12:23:40.024Z,1526905420.024 [Default:CheckIn:D] Stopped
2018-05-21T12:23:40.024Z,1526905420.024 [Default:CheckIn:E] Running Loop=1
2018-05-21T12:23:40.417Z,1526905420.417 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 762.116406 min 
2018-05-21T12:23:40.417Z,1526905420.417 [Default:CheckIn:E] Stopped
2018-05-21T12:23:40.417Z,1526905420.417 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T12:23:40.417Z,1526905420.417 [Default:CheckIn] Stopped
2018-05-21T12:23:40.417Z,1526905420.417 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T12:23:40.417Z,1526905420.417 [Default:CheckIn](INFO): Running loop #75
2018-05-21T12:23:40.418Z,1526905420.418 [Default:CheckIn] Running Loop=75
2018-05-21T12:23:40.418Z,1526905420.418 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T12:23:40.418Z,1526905420.418 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T12:23:43.615Z,1526905423.615 [NAL9602](INFO): Powering up
2018-05-21T12:23:54.753Z,1526905434.753 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:23:55.548Z,1526905435.548 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T12:23:55.548Z,1526905435.548 [NAL9602] Data Fault, FailCount= 3
2018-05-21T12:23:55.548Z,1526905435.548 [NAL9602](ERROR): Data Fault
2018-05-21T12:23:55.631Z,1526905435.631 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T12:23:55.947Z,1526905435.947 [NAL9602](INFO): Powering down
2018-05-21T12:23:56.828Z,1526905436.828 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T12:23:56.828Z,1526905436.828 [NAL9602] No Fault, FailCount= 3
2018-05-21T12:24:25.952Z,1526905465.952 [NAL9602](INFO): Powering up NAL9602
2018-05-21T12:24:37.147Z,1526905477.147 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:24:38.047Z,1526905478.047 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T12:25:26.477Z,1526905526.477 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:25:26.477Z,1526905526.477 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T12:25:26.866Z,1526905526.866 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:25:26.867Z,1526905526.867 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:25:26.867Z,1526905526.867 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:26:29.774Z,1526905589.774 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:26:29.774Z,1526905589.774 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:28:02.958Z,1526905682.958 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:28:02.958Z,1526905682.958 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:28:27.008Z,1526905707.008 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:28:27.008Z,1526905707.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T12:28:27.009Z,1526905707.009 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:28:27.021Z,1526905707.021 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:28:27.417Z,1526905707.417 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:28:27.417Z,1526905707.417 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T12:28:27.806Z,1526905707.806 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:28:27.806Z,1526905707.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:28:27.807Z,1526905707.807 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:28:40.603Z,1526905720.603 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T12:23:40.4Z
2018-05-21T12:28:40.603Z,1526905720.603 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T12:28:40.604Z,1526905720.604 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T12:28:40.961Z,1526905720.961 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:28:40.962Z,1526905720.962 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:28:44.730Z,1526905724.730 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0222.lzma
2018-05-21T12:28:45.524Z,1526905725.524 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0222.lzma.bak
2018-05-21T12:28:45.524Z,1526905725.524 [DataOverHttps](INFO): SBD MOMSN=8288238
2018-05-21T12:28:54.512Z,1526905734.512 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0223.lzma
2018-05-21T12:28:55.280Z,1526905735.280 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0223.lzma.bak
2018-05-21T12:28:55.280Z,1526905735.280 [DataOverHttps](INFO): SBD MOMSN=8288240
2018-05-21T12:28:55.986Z,1526905735.986 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T12:28:55.986Z,1526905735.986 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T12:28:55.986Z,1526905735.986 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T12:28:59.335Z,1526905739.335 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T12:28:59.335Z,1526905739.335 [BPC1] Communications Fault, FailCount= 4
2018-05-21T12:28:59.335Z,1526905739.335 [BPC1](ERROR): Communications Fault
2018-05-21T12:28:59.388Z,1526905739.388 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T12:29:00.305Z,1526905740.305 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T12:29:00.305Z,1526905740.305 [BPC1] No Fault, FailCount= 4
2018-05-21T12:29:18.609Z,1526905758.609 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:29:18.609Z,1526905758.609 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:29:39.009Z,1526905779.009 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:29:39.009Z,1526905779.009 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:29:41.008Z,1526905781.008 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T12:30:11.579Z,1526905811.579 [NAL9602](INFO): Powering down
2018-05-21T12:31:28.027Z,1526905888.027 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:31:28.027Z,1526905888.027 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T12:31:28.027Z,1526905888.027 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:31:28.059Z,1526905888.059 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:31:28.430Z,1526905888.430 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:31:28.430Z,1526905888.430 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T12:31:28.819Z,1526905888.819 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:31:28.820Z,1526905888.820 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:31:28.820Z,1526905888.820 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:33:56.530Z,1526906036.530 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T12:33:56.530Z,1526906036.530 [Default:CheckIn:C.Wait] Stopped
2018-05-21T12:33:56.530Z,1526906036.530 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T12:33:56.530Z,1526906036.530 [Default:CheckIn:D] Running Loop=1
2018-05-21T12:33:56.931Z,1526906036.931 [Default:CheckIn:D] Stopped
2018-05-21T12:33:56.931Z,1526906036.931 [Default:CheckIn:E] Running Loop=1
2018-05-21T12:34:00.229Z,1526906040.229 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 772.398177 min 
2018-05-21T12:34:00.230Z,1526906040.230 [Default:CheckIn:E] Stopped
2018-05-21T12:34:00.230Z,1526906040.230 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T12:34:00.230Z,1526906040.230 [Default:CheckIn] Stopped
2018-05-21T12:34:00.230Z,1526906040.230 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T12:34:00.231Z,1526906040.231 [Default:CheckIn](INFO): Running loop #76
2018-05-21T12:34:00.231Z,1526906040.231 [Default:CheckIn] Running Loop=76
2018-05-21T12:34:00.231Z,1526906040.231 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T12:34:00.232Z,1526906040.232 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T12:34:00.663Z,1526906040.663 [NAL9602](INFO): Powering up
2018-05-21T12:34:11.856Z,1526906051.856 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:34:29.109Z,1526906069.109 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:34:29.109Z,1526906069.109 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T12:34:29.110Z,1526906069.110 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:34:29.139Z,1526906069.139 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:34:29.523Z,1526906069.523 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:34:29.523Z,1526906069.523 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T12:34:29.911Z,1526906069.911 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:34:29.912Z,1526906069.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:34:29.912Z,1526906069.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:34:38.340Z,1526906078.340 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T12:34:43.856Z,1526906083.856 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T12:34:43.930Z,1526906083.930 [NAL9602](FAULT): received: 
+SBDI: 2, 5856, 2, 0, 0, 0

OK
2018-05-21T12:34:43.930Z,1526906083.930 [NAL9602] Data Fault, FailCount= 4
2018-05-21T12:34:43.930Z,1526906083.930 [NAL9602](ERROR): Data Fault
2018-05-21T12:34:44.019Z,1526906084.019 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T12:34:44.255Z,1526906084.255 [NAL9602](INFO): Powering down
2018-05-21T12:34:45.126Z,1526906085.126 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T12:34:45.126Z,1526906085.126 [NAL9602] No Fault, FailCount= 4
2018-05-21T12:35:07.475Z,1526906107.475 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T12:35:07.475Z,1526906107.475 [BPC1] Communications Fault, FailCount= 5
2018-05-21T12:35:07.475Z,1526906107.475 [BPC1](ERROR): Communications Fault
2018-05-21T12:35:07.527Z,1526906107.527 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T12:35:08.769Z,1526906108.769 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T12:35:08.769Z,1526906108.769 [BPC1] No Fault, FailCount= 5
2018-05-21T12:35:14.643Z,1526906114.643 [NAL9602](INFO): Powering up NAL9602
2018-05-21T12:35:25.843Z,1526906125.843 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:35:26.644Z,1526906126.644 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T12:35:26.644Z,1526906126.644 [NAL9602] Data Fault, FailCount= 5
2018-05-21T12:35:26.644Z,1526906126.644 [NAL9602](ERROR): Data Fault
2018-05-21T12:35:26.724Z,1526906126.724 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T12:35:26.724Z,1526906126.724 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T12:35:27.052Z,1526906127.052 [NAL9602](INFO): Powering down
2018-05-21T12:35:27.128Z,1526906127.128 [CBIT](INFO): Critical error at 20180521T123526
2018-05-21T12:36:22.334Z,1526906182.334 [BPC1](ERROR): Failed to parse Bank B battery data
2018-05-21T12:37:27.021Z,1526906247.021 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T12:37:27.021Z,1526906247.021 [NAL9602] No Fault, FailCount= 5
2018-05-21T12:37:27.304Z,1526906247.304 [NAL9602](INFO): Powering up NAL9602
2018-05-21T12:37:30.151Z,1526906250.151 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:37:30.151Z,1526906250.151 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T12:37:30.151Z,1526906250.151 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:37:30.192Z,1526906250.192 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:37:30.556Z,1526906250.556 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:37:30.556Z,1526906250.556 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T12:37:30.947Z,1526906250.947 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:37:30.948Z,1526906250.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:37:30.948Z,1526906250.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:37:38.108Z,1526906258.108 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:38:34.141Z,1526906314.141 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:38:34.141Z,1526906314.141 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:38:43.787Z,1526906323.787 [BPC1](ERROR): Failed to parse Bank A battery data
2018-05-21T12:38:52.141Z,1526906332.141 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:38:52.141Z,1526906332.141 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:39:00.903Z,1526906340.903 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T12:34:00.2Z
2018-05-21T12:39:00.903Z,1526906340.903 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T12:39:00.903Z,1526906340.903 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T12:39:05.728Z,1526906345.728 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0225.lzma
2018-05-21T12:39:06.528Z,1526906346.528 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0225.lzma.bak
2018-05-21T12:39:06.528Z,1526906346.528 [DataOverHttps](INFO): SBD MOMSN=8288245
2018-05-21T12:39:15.474Z,1526906355.474 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180520T234132/Express0226.lzma
2018-05-21T12:39:15.479Z,1526906355.479 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T12:39:16.276Z,1526906356.276 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0226.lzma.bak
2018-05-21T12:39:16.276Z,1526906356.276 [DataOverHttps](INFO): SBD MOMSN=8288248
2018-05-21T12:39:16.991Z,1526906356.991 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T12:39:16.991Z,1526906356.991 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T12:39:16.992Z,1526906356.992 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T12:39:46.267Z,1526906386.267 [NAL9602](INFO): Powering down
2018-05-21T12:40:31.130Z,1526906431.130 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:40:31.131Z,1526906431.131 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T12:40:31.131Z,1526906431.131 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:40:31.155Z,1526906431.155 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:40:31.555Z,1526906431.555 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:40:31.555Z,1526906431.555 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T12:40:31.966Z,1526906431.966 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:40:31.967Z,1526906431.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:40:31.967Z,1526906431.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:43:32.360Z,1526906612.360 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:43:32.360Z,1526906612.360 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T12:43:32.360Z,1526906612.360 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:43:32.393Z,1526906612.393 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:43:32.763Z,1526906612.763 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:43:32.763Z,1526906612.763 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T12:43:33.195Z,1526906613.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:43:33.196Z,1526906613.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:43:33.196Z,1526906613.196 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:43:56.334Z,1526906636.334 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T12:43:56.334Z,1526906636.334 [BPC1] Communications Fault, FailCount= 6
2018-05-21T12:43:56.334Z,1526906636.334 [BPC1](ERROR): Communications Fault
2018-05-21T12:43:56.358Z,1526906636.358 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T12:43:57.557Z,1526906637.557 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T12:43:57.557Z,1526906637.557 [BPC1] No Fault, FailCount= 6
2018-05-21T12:44:17.147Z,1526906657.147 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T12:44:17.147Z,1526906657.147 [Default:CheckIn:C.Wait] Stopped
2018-05-21T12:44:17.147Z,1526906657.147 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T12:44:17.147Z,1526906657.147 [Default:CheckIn:D] Running Loop=1
2018-05-21T12:44:17.552Z,1526906657.552 [Default:CheckIn:D] Stopped
2018-05-21T12:44:17.552Z,1526906657.552 [Default:CheckIn:E] Running Loop=1
2018-05-21T12:44:17.986Z,1526906657.986 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 782.741862 min 
2018-05-21T12:44:17.987Z,1526906657.987 [Default:CheckIn:E] Stopped
2018-05-21T12:44:17.987Z,1526906657.987 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T12:44:17.987Z,1526906657.987 [Default:CheckIn] Stopped
2018-05-21T12:44:17.987Z,1526906657.987 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T12:44:17.987Z,1526906657.987 [Default:CheckIn](INFO): Running loop #77
2018-05-21T12:44:17.987Z,1526906657.987 [Default:CheckIn] Running Loop=77
2018-05-21T12:44:17.987Z,1526906657.987 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T12:44:17.987Z,1526906657.987 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T12:44:18.706Z,1526906658.706 [NAL9602](INFO): Powering up
2018-05-21T12:44:29.552Z,1526906669.552 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:44:38.418Z,1526906678.418 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T12:46:33.435Z,1526906793.435 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:46:33.435Z,1526906793.435 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T12:46:33.435Z,1526906793.435 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:46:33.479Z,1526906793.479 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:46:33.870Z,1526906793.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:46:33.870Z,1526906793.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T12:46:34.232Z,1526906794.232 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:46:34.232Z,1526906794.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:46:34.232Z,1526906794.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:47:29.841Z,1526906849.841 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:47:29.841Z,1526906849.841 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:48:09.441Z,1526906889.441 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T12:48:09.441Z,1526906889.441 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T12:49:18.063Z,1526906958.063 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T12:44:17.0Z
2018-05-21T12:49:18.063Z,1526906958.063 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T12:49:18.063Z,1526906958.063 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T12:49:22.431Z,1526906962.431 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0228.lzma
2018-05-21T12:49:23.225Z,1526906963.225 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0228.lzma.bak
2018-05-21T12:49:23.225Z,1526906963.225 [DataOverHttps](INFO): SBD MOMSN=8288254
2018-05-21T12:49:32.152Z,1526906972.152 [DataOverHttps](INFO): Sending 199 bytes from file Logs/20180520T234132/Express0229.lzma
2018-05-21T12:49:32.552Z,1526906972.552 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T12:49:32.945Z,1526906972.945 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0229.lzma.bak
2018-05-21T12:49:32.945Z,1526906972.945 [DataOverHttps](INFO): SBD MOMSN=8288256
2018-05-21T12:49:33.653Z,1526906973.653 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T12:49:33.653Z,1526906973.653 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T12:49:33.653Z,1526906973.653 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T12:49:36.904Z,1526906976.904 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:49:36.904Z,1526906976.904 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T12:49:36.904Z,1526906976.904 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:49:36.937Z,1526906976.937 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:49:37.057Z,1526906977.057 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:49:37.057Z,1526906977.057 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T12:49:37.415Z,1526906977.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:49:37.416Z,1526906977.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:49:37.416Z,1526906977.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:50:02.952Z,1526907002.952 [NAL9602](INFO): Powering down
2018-05-21T12:50:49.364Z,1526907049.364 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T12:50:49.364Z,1526907049.364 [BPC1] Communications Fault, FailCount= 7
2018-05-21T12:50:49.364Z,1526907049.364 [BPC1](ERROR): Communications Fault
2018-05-21T12:50:49.388Z,1526907049.388 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T12:50:50.587Z,1526907050.587 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T12:50:50.587Z,1526907050.587 [BPC1] No Fault, FailCount= 7
2018-05-21T12:51:33.774Z,1526907093.774 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.385073 seconds old.
2018-05-21T12:51:33.776Z,1526907093.776 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.385517 seconds old.
2018-05-21T12:51:34.180Z,1526907094.180 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.791453 seconds old.
2018-05-21T12:51:34.182Z,1526907094.182 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.791759 seconds old.
2018-05-21T12:51:34.574Z,1526907094.574 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.184753 seconds old.
2018-05-21T12:51:34.576Z,1526907094.576 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.185202 seconds old.
2018-05-21T12:51:37.798Z,1526907097.798 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.408674 seconds old.
2018-05-21T12:51:37.816Z,1526907097.816 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.425263 seconds old.
2018-05-21T12:51:37.964Z,1526907097.964 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.575089 seconds old.
2018-05-21T12:51:37.966Z,1526907097.966 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.575310 seconds old.
2018-05-21T12:52:37.997Z,1526907157.997 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:52:37.997Z,1526907157.997 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T12:52:37.997Z,1526907157.997 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:52:38.010Z,1526907158.010 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:52:38.167Z,1526907158.167 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:52:38.167Z,1526907158.167 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T12:52:38.464Z,1526907158.464 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:52:38.464Z,1526907158.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:52:38.464Z,1526907158.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:54:34.081Z,1526907274.081 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T12:54:34.081Z,1526907274.081 [Default:CheckIn:C.Wait] Stopped
2018-05-21T12:54:34.081Z,1526907274.081 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T12:54:34.081Z,1526907274.081 [Default:CheckIn:D] Running Loop=1
2018-05-21T12:54:34.487Z,1526907274.487 [Default:CheckIn:D] Stopped
2018-05-21T12:54:34.487Z,1526907274.487 [Default:CheckIn:E] Running Loop=1
2018-05-21T12:54:34.872Z,1526907274.872 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 793.024089 min 
2018-05-21T12:54:34.873Z,1526907274.873 [Default:CheckIn:E] Stopped
2018-05-21T12:54:34.873Z,1526907274.873 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T12:54:34.873Z,1526907274.873 [Default:CheckIn] Stopped
2018-05-21T12:54:34.873Z,1526907274.873 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T12:54:34.873Z,1526907274.873 [Default:CheckIn](INFO): Running loop #78
2018-05-21T12:54:34.873Z,1526907274.873 [Default:CheckIn] Running Loop=78
2018-05-21T12:54:34.873Z,1526907274.873 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T12:54:34.873Z,1526907274.873 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T12:54:38.061Z,1526907278.061 [NAL9602](INFO): Powering up
2018-05-21T12:54:38.482Z,1526907278.482 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T12:54:49.208Z,1526907289.208 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:54:50.008Z,1526907290.008 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T12:54:50.008Z,1526907290.008 [NAL9602] Data Fault, FailCount= 1
2018-05-21T12:54:50.008Z,1526907290.008 [NAL9602](ERROR): Data Fault
2018-05-21T12:54:50.094Z,1526907290.094 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T12:54:50.407Z,1526907290.407 [NAL9602](INFO): Powering down
2018-05-21T12:54:51.269Z,1526907291.269 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T12:54:51.270Z,1526907291.270 [NAL9602] No Fault, FailCount= 1
2018-05-21T12:55:20.411Z,1526907320.411 [NAL9602](INFO): Powering up NAL9602
2018-05-21T12:55:31.607Z,1526907331.607 [NAL9602](INFO): NAL9602 initialized
2018-05-21T12:55:38.777Z,1526907338.777 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:55:38.777Z,1526907338.777 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T12:55:38.777Z,1526907338.777 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:55:38.850Z,1526907338.850 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:55:38.971Z,1526907338.971 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:55:38.971Z,1526907338.971 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T12:55:39.321Z,1526907339.321 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:55:39.321Z,1526907339.321 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:55:39.322Z,1526907339.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:57:54.926Z,1526907474.926 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T12:57:54.926Z,1526907474.926 [BPC1] Communications Fault, FailCount= 8
2018-05-21T12:57:54.926Z,1526907474.926 [BPC1](ERROR): Communications Fault
2018-05-21T12:57:54.954Z,1526907474.954 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T12:57:56.149Z,1526907476.149 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T12:57:56.149Z,1526907476.149 [BPC1] No Fault, FailCount= 8
2018-05-21T12:58:39.408Z,1526907519.408 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T12:58:39.408Z,1526907519.408 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T12:58:39.408Z,1526907519.408 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T12:58:39.421Z,1526907519.421 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T12:58:39.835Z,1526907519.835 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T12:58:39.835Z,1526907519.835 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T12:58:40.211Z,1526907520.211 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T12:58:40.211Z,1526907520.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T12:58:40.211Z,1526907520.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T12:59:35.006Z,1526907575.006 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T12:54:34.9Z
2018-05-21T12:59:35.006Z,1526907575.006 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T12:59:35.006Z,1526907575.006 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T12:59:38.842Z,1526907578.842 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180520T234132/Courier0231.lzma
2018-05-21T12:59:39.588Z,1526907579.588 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0231.lzma.bak
2018-05-21T12:59:39.588Z,1526907579.588 [DataOverHttps](INFO): SBD MOMSN=8288260
2018-05-21T12:59:48.725Z,1526907588.725 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0232.lzma
2018-05-21T12:59:49.524Z,1526907589.524 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0232.lzma.bak
2018-05-21T12:59:49.524Z,1526907589.524 [DataOverHttps](INFO): SBD MOMSN=8288262
2018-05-21T12:59:50.280Z,1526907590.280 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T12:59:50.280Z,1526907590.280 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T12:59:50.280Z,1526907590.280 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T13:00:35.304Z,1526907635.304 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T13:01:06.075Z,1526907666.075 [NAL9602](INFO): Powering down
2018-05-21T13:01:40.517Z,1526907700.517 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:01:40.518Z,1526907700.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T13:01:40.518Z,1526907700.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:01:40.530Z,1526907700.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:01:40.955Z,1526907700.955 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:01:40.955Z,1526907700.955 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T13:01:41.318Z,1526907701.318 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:01:41.319Z,1526907701.319 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:01:41.319Z,1526907701.319 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:04:38.840Z,1526907878.840 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T13:04:41.628Z,1526907881.628 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:04:41.628Z,1526907881.628 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T13:04:41.628Z,1526907881.628 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:04:41.641Z,1526907881.641 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:04:42.101Z,1526907882.101 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:04:42.101Z,1526907882.101 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T13:04:42.440Z,1526907882.440 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:04:42.440Z,1526907882.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:04:42.440Z,1526907882.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:04:50.426Z,1526907890.426 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T13:04:50.426Z,1526907890.426 [Default:CheckIn:C.Wait] Stopped
2018-05-21T13:04:50.426Z,1526907890.426 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T13:04:50.426Z,1526907890.426 [Default:CheckIn:D] Running Loop=1
2018-05-21T13:04:50.824Z,1526907890.824 [Default:CheckIn:D] Stopped
2018-05-21T13:04:50.824Z,1526907890.824 [Default:CheckIn:E] Running Loop=1
2018-05-21T13:04:51.225Z,1526907891.225 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 803.296354 min 
2018-05-21T13:04:51.226Z,1526907891.226 [Default:CheckIn:E] Stopped
2018-05-21T13:04:51.226Z,1526907891.226 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T13:04:51.226Z,1526907891.226 [Default:CheckIn] Stopped
2018-05-21T13:04:51.226Z,1526907891.226 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T13:04:51.226Z,1526907891.226 [Default:CheckIn](INFO): Running loop #79
2018-05-21T13:04:51.226Z,1526907891.226 [Default:CheckIn] Running Loop=79
2018-05-21T13:04:51.227Z,1526907891.227 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T13:04:51.227Z,1526907891.227 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T13:04:54.688Z,1526907894.688 [NAL9602](INFO): Powering up
2018-05-21T13:05:05.584Z,1526907905.584 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:07:42.765Z,1526908062.765 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:07:42.766Z,1526908062.766 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T13:07:42.766Z,1526908062.766 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:07:42.778Z,1526908062.778 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:07:43.179Z,1526908063.179 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:07:43.179Z,1526908063.179 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T13:07:43.582Z,1526908063.582 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:07:43.582Z,1526908063.582 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:07:43.583Z,1526908063.583 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:09:51.569Z,1526908191.569 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T13:04:51.2Z
2018-05-21T13:09:51.569Z,1526908191.569 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T13:09:51.569Z,1526908191.569 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T13:09:55.628Z,1526908195.628 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0234.lzma
2018-05-21T13:09:56.420Z,1526908196.420 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0234.lzma.bak
2018-05-21T13:09:56.420Z,1526908196.420 [DataOverHttps](INFO): SBD MOMSN=8288267
2018-05-21T13:10:05.204Z,1526908205.204 [DataOverHttps](INFO): Sending 200 bytes from file Logs/20180520T234132/Express0235.lzma
2018-05-21T13:10:05.972Z,1526908205.972 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0235.lzma.bak
2018-05-21T13:10:05.972Z,1526908205.972 [DataOverHttps](INFO): SBD MOMSN=8288269
2018-05-21T13:10:06.765Z,1526908206.765 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T13:10:06.765Z,1526908206.765 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T13:10:06.765Z,1526908206.765 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T13:10:09.929Z,1526908209.929 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T13:10:40.423Z,1526908240.423 [NAL9602](INFO): Powering down
2018-05-21T13:10:43.676Z,1526908243.676 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:10:43.676Z,1526908243.676 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T13:10:43.676Z,1526908243.676 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:10:43.689Z,1526908243.689 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:10:44.100Z,1526908244.100 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:10:44.100Z,1526908244.100 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T13:10:44.488Z,1526908244.488 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:10:44.489Z,1526908244.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:10:44.489Z,1526908244.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:13:44.515Z,1526908424.515 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:13:44.516Z,1526908424.516 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T13:13:44.516Z,1526908424.516 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:13:44.570Z,1526908424.570 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:13:44.939Z,1526908424.939 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:13:44.939Z,1526908424.939 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T13:13:45.361Z,1526908425.361 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:13:45.362Z,1526908425.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:13:45.362Z,1526908425.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:14:39.050Z,1526908479.050 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T13:15:07.038Z,1526908507.038 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T13:15:07.038Z,1526908507.038 [Default:CheckIn:C.Wait] Stopped
2018-05-21T13:15:07.038Z,1526908507.038 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T13:15:07.038Z,1526908507.038 [Default:CheckIn:D] Running Loop=1
2018-05-21T13:15:07.441Z,1526908507.441 [Default:CheckIn:D] Stopped
2018-05-21T13:15:07.441Z,1526908507.441 [Default:CheckIn:E] Running Loop=1
2018-05-21T13:15:07.878Z,1526908507.878 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 813.573307 min 
2018-05-21T13:15:07.878Z,1526908507.878 [Default:CheckIn:E] Stopped
2018-05-21T13:15:07.879Z,1526908507.879 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T13:15:07.879Z,1526908507.879 [Default:CheckIn] Stopped
2018-05-21T13:15:07.879Z,1526908507.879 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T13:15:07.879Z,1526908507.879 [Default:CheckIn](INFO): Running loop #80
2018-05-21T13:15:07.879Z,1526908507.879 [Default:CheckIn] Running Loop=80
2018-05-21T13:15:07.879Z,1526908507.879 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T13:15:07.879Z,1526908507.879 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T13:15:14.211Z,1526908514.211 [NAL9602](INFO): Powering up
2018-05-21T13:15:25.163Z,1526908525.163 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:15:25.964Z,1526908525.964 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T13:15:25.964Z,1526908525.964 [NAL9602] Data Fault, FailCount= 2
2018-05-21T13:15:25.964Z,1526908525.964 [NAL9602](ERROR): Data Fault
2018-05-21T13:15:26.073Z,1526908526.073 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T13:15:26.363Z,1526908526.363 [NAL9602](INFO): Powering down
2018-05-21T13:15:27.281Z,1526908527.281 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T13:15:27.281Z,1526908527.281 [NAL9602] No Fault, FailCount= 2
2018-05-21T13:15:56.764Z,1526908556.764 [NAL9602](INFO): Powering up NAL9602
2018-05-21T13:16:07.968Z,1526908567.968 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:16:45.736Z,1526908605.736 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:16:45.737Z,1526908605.737 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T13:16:45.737Z,1526908605.737 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:16:45.753Z,1526908605.753 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:16:46.161Z,1526908606.161 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:16:46.161Z,1526908606.161 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T13:16:46.545Z,1526908606.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:16:46.546Z,1526908606.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:16:46.546Z,1526908606.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:19:46.771Z,1526908786.771 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:19:46.772Z,1526908786.772 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T13:19:46.772Z,1526908786.772 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:19:46.785Z,1526908786.785 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:19:47.191Z,1526908787.191 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:19:47.191Z,1526908787.191 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T13:19:47.577Z,1526908787.577 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:19:47.578Z,1526908787.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:19:47.578Z,1526908787.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:20:07.985Z,1526908807.985 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T13:15:07.9Z
2018-05-21T13:20:07.985Z,1526908807.985 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T13:20:07.985Z,1526908807.985 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T13:20:12.015Z,1526908812.015 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0237.lzma
2018-05-21T13:20:12.808Z,1526908812.808 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0237.lzma.bak
2018-05-21T13:20:12.808Z,1526908812.808 [DataOverHttps](INFO): SBD MOMSN=8288273
2018-05-21T13:20:21.625Z,1526908821.625 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0238.lzma
2018-05-21T13:20:22.424Z,1526908822.424 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0238.lzma.bak
2018-05-21T13:20:22.424Z,1526908822.424 [DataOverHttps](INFO): SBD MOMSN=8288275
2018-05-21T13:20:23.179Z,1526908823.179 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T13:20:23.179Z,1526908823.179 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T13:20:23.179Z,1526908823.179 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T13:21:13.656Z,1526908873.656 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T13:21:44.443Z,1526908904.443 [NAL9602](INFO): Powering down
2018-05-21T13:22:47.656Z,1526908967.656 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:22:47.657Z,1526908967.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T13:22:47.657Z,1526908967.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:22:47.669Z,1526908967.669 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:22:48.102Z,1526908968.102 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:22:48.102Z,1526908968.102 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T13:22:48.462Z,1526908968.462 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:22:48.463Z,1526908968.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:22:48.463Z,1526908968.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:24:39.128Z,1526909079.128 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T13:25:23.524Z,1526909123.524 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T13:25:23.525Z,1526909123.525 [Default:CheckIn:C.Wait] Stopped
2018-05-21T13:25:23.525Z,1526909123.525 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T13:25:23.525Z,1526909123.525 [Default:CheckIn:D] Running Loop=1
2018-05-21T13:25:23.931Z,1526909123.931 [Default:CheckIn:D] Stopped
2018-05-21T13:25:23.931Z,1526909123.931 [Default:CheckIn:E] Running Loop=1
2018-05-21T13:25:24.332Z,1526909124.332 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 823.848177 min 
2018-05-21T13:25:24.332Z,1526909124.332 [Default:CheckIn:E] Stopped
2018-05-21T13:25:24.332Z,1526909124.332 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T13:25:24.332Z,1526909124.332 [Default:CheckIn] Stopped
2018-05-21T13:25:24.332Z,1526909124.332 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T13:25:24.333Z,1526909124.333 [Default:CheckIn](INFO): Running loop #81
2018-05-21T13:25:24.333Z,1526909124.333 [Default:CheckIn] Running Loop=81
2018-05-21T13:25:24.333Z,1526909124.333 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T13:25:24.333Z,1526909124.333 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T13:25:28.354Z,1526909128.354 [NAL9602](INFO): Powering up
2018-05-21T13:25:39.260Z,1526909139.260 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:25:48.511Z,1526909148.511 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:25:48.511Z,1526909148.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T13:25:48.511Z,1526909148.511 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:25:48.526Z,1526909148.526 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:25:48.526Z,1526909148.526 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:26:11.260Z,1526909171.260 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T13:26:11.334Z,1526909171.334 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T13:26:11.334Z,1526909171.334 [NAL9602] Data Fault, FailCount= 3
2018-05-21T13:26:11.334Z,1526909171.334 [NAL9602](ERROR): Data Fault
2018-05-21T13:26:11.406Z,1526909171.406 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T13:26:11.659Z,1526909171.659 [NAL9602](INFO): Powering down
2018-05-21T13:26:12.520Z,1526909172.520 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T13:26:12.520Z,1526909172.520 [NAL9602] No Fault, FailCount= 3
2018-05-21T13:26:42.032Z,1526909202.032 [NAL9602](INFO): Powering up NAL9602
2018-05-21T13:26:53.231Z,1526909213.231 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:26:54.032Z,1526909214.032 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T13:26:54.032Z,1526909214.032 [NAL9602] Data Fault, FailCount= 4
2018-05-21T13:26:54.032Z,1526909214.032 [NAL9602](ERROR): Data Fault
2018-05-21T13:26:54.102Z,1526909214.102 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T13:26:54.431Z,1526909214.431 [NAL9602](INFO): Powering down
2018-05-21T13:26:55.291Z,1526909215.291 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T13:26:55.291Z,1526909215.291 [NAL9602] No Fault, FailCount= 4
2018-05-21T13:27:24.832Z,1526909244.832 [NAL9602](INFO): Powering up NAL9602
2018-05-21T13:27:35.684Z,1526909255.684 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:30:24.711Z,1526909424.711 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T13:25:24.3Z
2018-05-21T13:30:24.711Z,1526909424.711 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T13:30:24.711Z,1526909424.711 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T13:30:28.680Z,1526909428.680 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0240.lzma
2018-05-21T13:30:29.472Z,1526909429.472 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0240.lzma.bak
2018-05-21T13:30:29.472Z,1526909429.472 [DataOverHttps](INFO): SBD MOMSN=8288280
2018-05-21T13:30:38.541Z,1526909438.541 [DataOverHttps](INFO): Sending 311 bytes from file Logs/20180520T234132/Express0241.lzma
2018-05-21T13:30:39.308Z,1526909439.308 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0241.lzma.bak
2018-05-21T13:30:39.308Z,1526909439.308 [DataOverHttps](INFO): SBD MOMSN=8288282
2018-05-21T13:30:40.030Z,1526909440.030 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T13:30:40.030Z,1526909440.030 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T13:30:40.030Z,1526909440.030 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T13:30:43.291Z,1526909443.291 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T13:31:13.772Z,1526909473.772 [NAL9602](INFO): Powering down
2018-05-21T13:34:39.412Z,1526909679.412 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T13:35:40.228Z,1526909740.228 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T13:35:40.228Z,1526909740.228 [Default:CheckIn:C.Wait] Stopped
2018-05-21T13:35:40.228Z,1526909740.228 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T13:35:40.228Z,1526909740.228 [Default:CheckIn:D] Running Loop=1
2018-05-21T13:35:40.622Z,1526909740.622 [Default:CheckIn:D] Stopped
2018-05-21T13:35:40.623Z,1526909740.623 [Default:CheckIn:E] Running Loop=1
2018-05-21T13:35:41.024Z,1526909741.024 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 834.126367 min 
2018-05-21T13:35:41.024Z,1526909741.024 [Default:CheckIn:E] Stopped
2018-05-21T13:35:41.024Z,1526909741.024 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T13:35:41.025Z,1526909741.025 [Default:CheckIn] Stopped
2018-05-21T13:35:41.025Z,1526909741.025 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T13:35:41.025Z,1526909741.025 [Default:CheckIn](INFO): Running loop #82
2018-05-21T13:35:41.025Z,1526909741.025 [Default:CheckIn] Running Loop=82
2018-05-21T13:35:41.025Z,1526909741.025 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T13:35:41.025Z,1526909741.025 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T13:35:44.583Z,1526909744.583 [NAL9602](INFO): Powering up
2018-05-21T13:35:55.456Z,1526909755.456 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:36:27.456Z,1526909787.456 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T13:36:27.538Z,1526909787.538 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T13:36:27.538Z,1526909787.538 [NAL9602] Data Fault, FailCount= 5
2018-05-21T13:36:27.538Z,1526909787.538 [NAL9602](ERROR): Data Fault
2018-05-21T13:36:27.614Z,1526909787.614 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T13:36:27.614Z,1526909787.614 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T13:36:27.856Z,1526909787.856 [NAL9602](INFO): Powering down
2018-05-21T13:36:27.927Z,1526909787.927 [CBIT](INFO): Critical error at 20180521T133627
2018-05-21T13:38:27.848Z,1526909907.848 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T13:38:27.848Z,1526909907.848 [NAL9602] No Fault, FailCount= 5
2018-05-21T13:38:28.191Z,1526909908.191 [NAL9602](INFO): Powering up NAL9602
2018-05-21T13:38:39.392Z,1526909919.392 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:38:40.192Z,1526909920.192 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T13:38:40.192Z,1526909920.192 [NAL9602] Data Fault, FailCount= 1
2018-05-21T13:38:40.192Z,1526909920.192 [NAL9602](ERROR): Data Fault
2018-05-21T13:38:40.272Z,1526909920.272 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T13:38:40.591Z,1526909920.591 [NAL9602](INFO): Powering down
2018-05-21T13:38:41.443Z,1526909921.443 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T13:38:41.443Z,1526909921.443 [NAL9602] No Fault, FailCount= 1
2018-05-21T13:39:10.651Z,1526909950.651 [NAL9602](INFO): Powering up NAL9602
2018-05-21T13:39:21.852Z,1526909961.852 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:40:41.092Z,1526910041.092 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T13:35:41.0Z
2018-05-21T13:40:41.092Z,1526910041.092 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T13:40:41.092Z,1526910041.092 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T13:40:45.458Z,1526910045.458 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0243.lzma
2018-05-21T13:40:46.224Z,1526910046.224 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0243.lzma.bak
2018-05-21T13:40:46.224Z,1526910046.224 [DataOverHttps](INFO): SBD MOMSN=8288289
2018-05-21T13:40:50.585Z,1526910050.585 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:40:50.586Z,1526910050.586 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T13:40:50.729Z,1526910050.729 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:40:50.730Z,1526910050.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:40:50.731Z,1526910050.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:40:55.403Z,1526910055.403 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0244.lzma
2018-05-21T13:40:56.204Z,1526910056.204 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0244.lzma.bak
2018-05-21T13:40:56.204Z,1526910056.204 [DataOverHttps](INFO): SBD MOMSN=8288292
2018-05-21T13:40:56.906Z,1526910056.906 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T13:40:56.906Z,1526910056.906 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T13:40:56.906Z,1526910056.906 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T13:41:00.121Z,1526910060.121 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T13:41:30.611Z,1526910090.611 [NAL9602](INFO): Powering down
2018-05-21T13:43:50.771Z,1526910230.771 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:43:50.771Z,1526910230.771 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T13:43:50.771Z,1526910230.771 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:43:50.828Z,1526910230.828 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:43:51.175Z,1526910231.175 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:43:51.175Z,1526910231.175 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T13:43:51.563Z,1526910231.563 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:43:51.563Z,1526910231.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:43:51.564Z,1526910231.564 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:44:39.748Z,1526910279.748 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T13:45:57.300Z,1526910357.300 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T13:45:57.300Z,1526910357.300 [Default:CheckIn:C.Wait] Stopped
2018-05-21T13:45:57.300Z,1526910357.300 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T13:45:57.300Z,1526910357.300 [Default:CheckIn:D] Running Loop=1
2018-05-21T13:45:57.713Z,1526910357.713 [Default:CheckIn:D] Stopped
2018-05-21T13:45:57.713Z,1526910357.713 [Default:CheckIn:E] Running Loop=1
2018-05-21T13:45:58.121Z,1526910358.121 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 844.411198 min 
2018-05-21T13:45:58.121Z,1526910358.121 [Default:CheckIn:E] Stopped
2018-05-21T13:45:58.122Z,1526910358.122 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T13:45:58.122Z,1526910358.122 [Default:CheckIn] Stopped
2018-05-21T13:45:58.122Z,1526910358.122 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T13:45:58.122Z,1526910358.122 [Default:CheckIn](INFO): Running loop #83
2018-05-21T13:45:58.122Z,1526910358.122 [Default:CheckIn] Running Loop=83
2018-05-21T13:45:58.123Z,1526910358.123 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T13:45:58.123Z,1526910358.123 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T13:46:01.399Z,1526910361.399 [NAL9602](INFO): Powering up
2018-05-21T13:46:12.580Z,1526910372.580 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:46:44.572Z,1526910404.572 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T13:46:44.650Z,1526910404.650 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T13:46:44.650Z,1526910404.650 [NAL9602] Data Fault, FailCount= 2
2018-05-21T13:46:44.650Z,1526910404.650 [NAL9602](ERROR): Data Fault
2018-05-21T13:46:44.742Z,1526910404.742 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T13:46:44.971Z,1526910404.971 [NAL9602](INFO): Powering down
2018-05-21T13:46:45.838Z,1526910405.838 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T13:46:45.838Z,1526910405.838 [NAL9602] No Fault, FailCount= 2
2018-05-21T13:46:51.811Z,1526910411.811 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:46:51.812Z,1526910411.812 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T13:46:51.812Z,1526910411.812 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:46:51.837Z,1526910411.837 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:46:52.222Z,1526910412.222 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:46:52.222Z,1526910412.222 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T13:46:52.611Z,1526910412.611 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:46:52.612Z,1526910412.612 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:46:52.612Z,1526910412.612 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:47:15.160Z,1526910435.160 [NAL9602](INFO): Powering up NAL9602
2018-05-21T13:47:25.960Z,1526910445.960 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:49:52.804Z,1526910592.804 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:49:52.804Z,1526910592.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T13:49:52.804Z,1526910592.804 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:49:52.828Z,1526910592.828 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:49:53.205Z,1526910593.205 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:49:53.205Z,1526910593.205 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T13:49:53.598Z,1526910593.598 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:49:53.599Z,1526910593.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:49:53.599Z,1526910593.599 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:50:58.468Z,1526910658.468 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T13:45:58.1Z
2018-05-21T13:50:58.468Z,1526910658.468 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T13:50:58.468Z,1526910658.468 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T13:51:02.378Z,1526910662.378 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0246.lzma
2018-05-21T13:51:03.180Z,1526910663.180 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0246.lzma.bak
2018-05-21T13:51:03.180Z,1526910663.180 [DataOverHttps](INFO): SBD MOMSN=8288298
2018-05-21T13:51:12.058Z,1526910672.058 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0247.lzma
2018-05-21T13:51:12.856Z,1526910672.856 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0247.lzma.bak
2018-05-21T13:51:12.856Z,1526910672.856 [DataOverHttps](INFO): SBD MOMSN=8288300
2018-05-21T13:51:13.566Z,1526910673.566 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T13:51:13.566Z,1526910673.566 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T13:51:13.566Z,1526910673.566 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T13:51:16.784Z,1526910676.784 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T13:51:47.275Z,1526910707.275 [NAL9602](INFO): Powering down
2018-05-21T13:52:53.692Z,1526910773.692 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:52:53.692Z,1526910773.692 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T13:52:53.692Z,1526910773.692 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:52:53.717Z,1526910773.717 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:52:54.142Z,1526910774.142 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:52:54.142Z,1526910774.142 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T13:52:54.506Z,1526910774.506 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:52:54.507Z,1526910774.507 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:52:54.507Z,1526910774.507 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:54:39.786Z,1526910879.786 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T13:55:54.795Z,1526910954.795 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:55:54.795Z,1526910954.795 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T13:55:54.795Z,1526910954.795 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:55:54.808Z,1526910954.808 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:55:55.201Z,1526910955.201 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:55:55.201Z,1526910955.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T13:55:55.603Z,1526910955.603 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:55:55.603Z,1526910955.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:55:55.603Z,1526910955.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T13:56:13.993Z,1526910973.993 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T13:56:13.993Z,1526910973.993 [Default:CheckIn:C.Wait] Stopped
2018-05-21T13:56:13.994Z,1526910973.994 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T13:56:13.994Z,1526910973.994 [Default:CheckIn:D] Running Loop=1
2018-05-21T13:56:14.390Z,1526910974.390 [Default:CheckIn:D] Stopped
2018-05-21T13:56:14.390Z,1526910974.390 [Default:CheckIn:E] Running Loop=1
2018-05-21T13:56:14.793Z,1526910974.793 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 854.689128 min 
2018-05-21T13:56:14.793Z,1526910974.793 [Default:CheckIn:E] Stopped
2018-05-21T13:56:14.793Z,1526910974.793 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T13:56:14.793Z,1526910974.793 [Default:CheckIn] Stopped
2018-05-21T13:56:14.793Z,1526910974.793 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T13:56:14.793Z,1526910974.793 [Default:CheckIn](INFO): Running loop #84
2018-05-21T13:56:14.794Z,1526910974.794 [Default:CheckIn] Running Loop=84
2018-05-21T13:56:14.794Z,1526910974.794 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T13:56:14.794Z,1526910974.794 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T13:56:18.020Z,1526910978.020 [NAL9602](INFO): Powering up
2018-05-21T13:56:29.220Z,1526910989.220 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:56:30.020Z,1526910990.020 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T13:56:30.020Z,1526910990.020 [NAL9602] Data Fault, FailCount= 3
2018-05-21T13:56:30.020Z,1526910990.020 [NAL9602](ERROR): Data Fault
2018-05-21T13:56:30.114Z,1526910990.114 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T13:56:30.419Z,1526910990.419 [NAL9602](INFO): Powering down
2018-05-21T13:56:31.287Z,1526910991.287 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T13:56:31.287Z,1526910991.287 [NAL9602] No Fault, FailCount= 3
2018-05-21T13:57:00.819Z,1526911020.819 [NAL9602](INFO): Powering up NAL9602
2018-05-21T13:57:11.620Z,1526911031.620 [NAL9602](INFO): NAL9602 initialized
2018-05-21T13:58:55.897Z,1526911135.897 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T13:58:55.897Z,1526911135.897 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T13:58:55.897Z,1526911135.897 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T13:58:55.909Z,1526911135.909 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T13:58:56.321Z,1526911136.321 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T13:58:56.321Z,1526911136.321 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T13:58:56.703Z,1526911136.703 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T13:58:56.703Z,1526911136.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T13:58:56.703Z,1526911136.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:01:14.983Z,1526911274.983 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T13:56:14.8Z
2018-05-21T14:01:14.983Z,1526911274.983 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T14:01:14.983Z,1526911274.983 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T14:01:18.738Z,1526911278.738 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0249.lzma
2018-05-21T14:01:19.528Z,1526911279.528 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0249.lzma.bak
2018-05-21T14:01:19.528Z,1526911279.528 [DataOverHttps](INFO): SBD MOMSN=8288305
2018-05-21T14:01:28.613Z,1526911288.613 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20180520T234132/Express0250.lzma
2018-05-21T14:01:29.412Z,1526911289.412 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0250.lzma.bak
2018-05-21T14:01:29.412Z,1526911289.412 [DataOverHttps](INFO): SBD MOMSN=8288307
2018-05-21T14:01:30.121Z,1526911290.121 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T14:01:30.121Z,1526911290.121 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T14:01:30.121Z,1526911290.121 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T14:01:57.082Z,1526911317.082 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:01:57.082Z,1526911317.082 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T14:01:57.083Z,1526911317.083 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:01:57.111Z,1526911317.111 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:01:57.483Z,1526911317.483 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:01:57.483Z,1526911317.483 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T14:01:57.869Z,1526911317.869 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:01:57.870Z,1526911317.870 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:01:57.870Z,1526911317.870 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:02:14.615Z,1526911334.615 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T14:02:45.087Z,1526911365.087 [NAL9602](INFO): Powering down
2018-05-21T14:04:40.080Z,1526911480.080 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T14:04:58.068Z,1526911498.068 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:04:58.068Z,1526911498.068 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T14:04:58.068Z,1526911498.068 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:04:58.081Z,1526911498.081 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:04:58.478Z,1526911498.478 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:04:58.478Z,1526911498.478 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T14:04:58.887Z,1526911498.887 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:04:58.887Z,1526911498.887 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:04:58.887Z,1526911498.887 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:06:30.516Z,1526911590.516 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T14:06:30.517Z,1526911590.517 [Default:CheckIn:C.Wait] Stopped
2018-05-21T14:06:30.517Z,1526911590.517 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T14:06:30.517Z,1526911590.517 [Default:CheckIn:D] Running Loop=1
2018-05-21T14:06:30.933Z,1526911590.933 [Default:CheckIn:D] Stopped
2018-05-21T14:06:30.933Z,1526911590.933 [Default:CheckIn:E] Running Loop=1
2018-05-21T14:06:31.327Z,1526911591.327 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 864.964844 min 
2018-05-21T14:06:31.327Z,1526911591.327 [Default:CheckIn:E] Stopped
2018-05-21T14:06:31.328Z,1526911591.328 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T14:06:31.328Z,1526911591.328 [Default:CheckIn] Stopped
2018-05-21T14:06:31.328Z,1526911591.328 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T14:06:31.328Z,1526911591.328 [Default:CheckIn](INFO): Running loop #85
2018-05-21T14:06:31.328Z,1526911591.328 [Default:CheckIn] Running Loop=85
2018-05-21T14:06:31.328Z,1526911591.328 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T14:06:31.328Z,1526911591.328 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T14:06:34.631Z,1526911594.631 [NAL9602](INFO): Powering up
2018-05-21T14:06:45.795Z,1526911605.795 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:07:17.796Z,1526911637.796 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T14:07:17.870Z,1526911637.870 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T14:07:17.870Z,1526911637.870 [NAL9602] Data Fault, FailCount= 4
2018-05-21T14:07:17.870Z,1526911637.870 [NAL9602](ERROR): Data Fault
2018-05-21T14:07:17.939Z,1526911637.939 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:07:18.203Z,1526911638.203 [NAL9602](INFO): Powering down
2018-05-21T14:07:19.097Z,1526911639.097 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:07:19.097Z,1526911639.097 [NAL9602] No Fault, FailCount= 4
2018-05-21T14:07:48.604Z,1526911668.604 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:07:59.048Z,1526911679.048 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:07:59.048Z,1526911679.048 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T14:07:59.048Z,1526911679.048 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:07:59.060Z,1526911679.060 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:07:59.491Z,1526911679.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:07:59.491Z,1526911679.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T14:07:59.804Z,1526911679.804 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:07:59.855Z,1526911679.855 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:07:59.856Z,1526911679.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:07:59.856Z,1526911679.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:08:00.604Z,1526911680.604 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T14:08:00.604Z,1526911680.604 [NAL9602] Data Fault, FailCount= 5
2018-05-21T14:08:00.604Z,1526911680.604 [NAL9602](ERROR): Data Fault
2018-05-21T14:08:00.695Z,1526911680.695 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:08:00.695Z,1526911680.695 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T14:08:01.003Z,1526911681.003 [NAL9602](INFO): Powering down
2018-05-21T14:08:01.076Z,1526911681.076 [CBIT](INFO): Critical error at 20180521T140800
2018-05-21T14:10:00.723Z,1526911800.723 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:10:00.723Z,1526911800.723 [NAL9602] No Fault, FailCount= 5
2018-05-21T14:10:01.039Z,1526911801.039 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:10:12.240Z,1526911812.240 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:10:59.866Z,1526911859.866 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:10:59.867Z,1526911859.867 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T14:10:59.867Z,1526911859.867 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:10:59.879Z,1526911859.879 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:11:00.282Z,1526911860.282 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:11:00.282Z,1526911860.282 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T14:11:00.678Z,1526911860.678 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:11:00.679Z,1526911860.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:11:00.679Z,1526911860.679 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:11:31.487Z,1526911891.487 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T14:06:31.3Z
2018-05-21T14:11:31.487Z,1526911891.487 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T14:11:31.487Z,1526911891.487 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T14:11:35.443Z,1526911895.443 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0252.lzma
2018-05-21T14:11:36.236Z,1526911896.236 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0252.lzma.bak
2018-05-21T14:11:36.236Z,1526911896.236 [DataOverHttps](INFO): SBD MOMSN=8288312
2018-05-21T14:11:45.244Z,1526911905.244 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180520T234132/Express0253.lzma
2018-05-21T14:11:46.012Z,1526911906.012 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0253.lzma.bak
2018-05-21T14:11:46.012Z,1526911906.012 [DataOverHttps](INFO): SBD MOMSN=8288315
2018-05-21T14:11:46.738Z,1526911906.738 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T14:11:46.739Z,1526911906.739 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T14:11:46.739Z,1526911906.739 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T14:11:49.935Z,1526911909.935 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T14:12:20.427Z,1526911940.427 [NAL9602](INFO): Powering down
2018-05-21T14:13:06.526Z,1526911986.526 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.388873 seconds old.
2018-05-21T14:13:06.529Z,1526911986.529 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.389949 seconds old.
2018-05-21T14:13:06.928Z,1526911986.928 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.791187 seconds old.
2018-05-21T14:13:06.930Z,1526911986.930 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.791418 seconds old.
2018-05-21T14:13:07.322Z,1526911987.322 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.184785 seconds old.
2018-05-21T14:13:07.324Z,1526911987.324 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.185195 seconds old.
2018-05-21T14:13:07.732Z,1526911987.732 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.595110 seconds old.
2018-05-21T14:13:07.734Z,1526911987.734 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.595297 seconds old.
2018-05-21T14:13:08.129Z,1526911988.129 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.992573 seconds old.
2018-05-21T14:13:08.132Z,1526911988.132 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.992861 seconds old.
2018-05-21T14:13:08.521Z,1526911988.521 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.383780 seconds old.
2018-05-21T14:13:08.523Z,1526911988.523 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.384231 seconds old.
2018-05-21T14:13:08.928Z,1526911988.928 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.791361 seconds old.
2018-05-21T14:13:08.930Z,1526911988.930 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.791633 seconds old.
2018-05-21T14:13:09.322Z,1526911989.322 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.185040 seconds old.
2018-05-21T14:13:09.325Z,1526911989.325 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.186043 seconds old.
2018-05-21T14:13:09.728Z,1526911989.728 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.591617 seconds old.
2018-05-21T14:13:09.735Z,1526911989.735 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.595926 seconds old.
2018-05-21T14:13:10.129Z,1526911990.129 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.992166 seconds old.
2018-05-21T14:13:10.131Z,1526911990.131 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.992466 seconds old.
2018-05-21T14:13:10.520Z,1526911990.520 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.382714 seconds old.
2018-05-21T14:13:10.522Z,1526911990.522 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.382917 seconds old.
2018-05-21T14:13:10.928Z,1526911990.928 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.791538 seconds old.
2018-05-21T14:13:10.931Z,1526911990.931 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.791936 seconds old.
2018-05-21T14:14:00.965Z,1526912040.965 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:14:00.965Z,1526912040.965 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T14:14:00.965Z,1526912040.965 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:14:00.977Z,1526912040.977 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:14:01.337Z,1526912041.337 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:14:01.337Z,1526912041.337 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T14:14:01.730Z,1526912041.730 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:14:01.731Z,1526912041.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:14:01.731Z,1526912041.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:14:40.146Z,1526912080.146 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T14:16:46.908Z,1526912206.908 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T14:16:46.909Z,1526912206.909 [Default:CheckIn:C.Wait] Stopped
2018-05-21T14:16:46.909Z,1526912206.909 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T14:16:46.909Z,1526912206.909 [Default:CheckIn:D] Running Loop=1
2018-05-21T14:16:47.297Z,1526912207.297 [Default:CheckIn:D] Stopped
2018-05-21T14:16:47.297Z,1526912207.297 [Default:CheckIn:E] Running Loop=1
2018-05-21T14:16:47.706Z,1526912207.706 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 875.237565 min 
2018-05-21T14:16:47.706Z,1526912207.706 [Default:CheckIn:E] Stopped
2018-05-21T14:16:47.706Z,1526912207.706 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T14:16:47.706Z,1526912207.706 [Default:CheckIn] Stopped
2018-05-21T14:16:47.707Z,1526912207.707 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T14:16:47.707Z,1526912207.707 [Default:CheckIn](INFO): Running loop #86
2018-05-21T14:16:47.707Z,1526912207.707 [Default:CheckIn] Running Loop=86
2018-05-21T14:16:47.707Z,1526912207.707 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T14:16:47.707Z,1526912207.707 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T14:16:50.939Z,1526912210.939 [NAL9602](INFO): Powering up
2018-05-21T14:17:01.767Z,1526912221.767 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:17:01.767Z,1526912221.767 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T14:17:01.767Z,1526912221.767 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:17:01.780Z,1526912221.780 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:17:02.116Z,1526912222.116 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:17:02.175Z,1526912222.175 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:17:02.175Z,1526912222.175 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T14:17:02.565Z,1526912222.565 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:17:02.565Z,1526912222.565 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:17:02.565Z,1526912222.565 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:17:34.116Z,1526912254.116 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T14:17:34.190Z,1526912254.190 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T14:17:34.190Z,1526912254.190 [NAL9602] Data Fault, FailCount= 1
2018-05-21T14:17:34.190Z,1526912254.190 [NAL9602](ERROR): Data Fault
2018-05-21T14:17:34.280Z,1526912254.280 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:17:34.519Z,1526912254.519 [NAL9602](INFO): Powering down
2018-05-21T14:17:35.369Z,1526912255.369 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:17:35.369Z,1526912255.369 [NAL9602] No Fault, FailCount= 1
2018-05-21T14:18:04.896Z,1526912284.896 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:18:16.095Z,1526912296.095 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:20:02.568Z,1526912402.568 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:20:02.568Z,1526912402.568 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T14:20:02.568Z,1526912402.568 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:20:02.581Z,1526912402.581 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:20:02.965Z,1526912402.965 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:20:02.965Z,1526912402.965 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T14:20:03.353Z,1526912403.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:20:03.353Z,1526912403.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:20:03.353Z,1526912403.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:21:47.840Z,1526912507.840 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T14:16:47.7Z
2018-05-21T14:21:47.840Z,1526912507.840 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T14:21:47.840Z,1526912507.840 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T14:21:51.532Z,1526912511.532 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0255.lzma
2018-05-21T14:21:52.300Z,1526912512.300 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0255.lzma.bak
2018-05-21T14:21:52.300Z,1526912512.300 [DataOverHttps](INFO): SBD MOMSN=8288321
2018-05-21T14:22:01.144Z,1526912521.144 [DataOverHttps](INFO): Sending 240 bytes from file Logs/20180520T234132/Express0256.lzma
2018-05-21T14:22:01.912Z,1526912521.912 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0256.lzma.bak
2018-05-21T14:22:01.912Z,1526912521.912 [DataOverHttps](INFO): SBD MOMSN=8288323
2018-05-21T14:22:02.642Z,1526912522.642 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T14:22:02.642Z,1526912522.642 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T14:22:02.642Z,1526912522.642 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T14:22:05.818Z,1526912525.818 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T14:22:36.311Z,1526912556.311 [NAL9602](INFO): Powering down
2018-05-21T14:23:06.260Z,1526912586.260 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:23:06.260Z,1526912586.260 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T14:23:06.260Z,1526912586.260 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:23:06.289Z,1526912586.289 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:23:06.415Z,1526912586.415 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:23:06.415Z,1526912586.415 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T14:23:06.753Z,1526912586.753 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:23:06.754Z,1526912586.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:23:06.754Z,1526912586.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:24:40.461Z,1526912680.461 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T14:26:06.923Z,1526912766.923 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:26:06.923Z,1526912766.923 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T14:26:06.923Z,1526912766.923 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:26:06.969Z,1526912766.969 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:26:07.076Z,1526912767.076 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:26:07.076Z,1526912767.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T14:26:07.437Z,1526912767.437 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:26:07.438Z,1526912767.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:26:07.438Z,1526912767.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:27:03.058Z,1526912823.058 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T14:27:03.058Z,1526912823.058 [Default:CheckIn:C.Wait] Stopped
2018-05-21T14:27:03.058Z,1526912823.058 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T14:27:03.058Z,1526912823.058 [Default:CheckIn:D] Running Loop=1
2018-05-21T14:27:03.461Z,1526912823.461 [Default:CheckIn:D] Stopped
2018-05-21T14:27:03.461Z,1526912823.461 [Default:CheckIn:E] Running Loop=1
2018-05-21T14:27:03.850Z,1526912823.850 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 885.506966 min 
2018-05-21T14:27:03.850Z,1526912823.850 [Default:CheckIn:E] Stopped
2018-05-21T14:27:03.850Z,1526912823.850 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T14:27:03.850Z,1526912823.850 [Default:CheckIn] Stopped
2018-05-21T14:27:03.850Z,1526912823.850 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T14:27:03.850Z,1526912823.850 [Default:CheckIn](INFO): Running loop #87
2018-05-21T14:27:03.851Z,1526912823.851 [Default:CheckIn] Running Loop=87
2018-05-21T14:27:03.851Z,1526912823.851 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T14:27:03.851Z,1526912823.851 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T14:27:07.088Z,1526912827.088 [NAL9602](INFO): Powering up
2018-05-21T14:27:18.268Z,1526912838.268 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:27:19.068Z,1526912839.068 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T14:27:19.068Z,1526912839.068 [NAL9602] Data Fault, FailCount= 2
2018-05-21T14:27:19.068Z,1526912839.068 [NAL9602](ERROR): Data Fault
2018-05-21T14:27:19.151Z,1526912839.151 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:27:19.467Z,1526912839.467 [NAL9602](INFO): Powering down
2018-05-21T14:27:20.330Z,1526912840.330 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:27:20.331Z,1526912840.331 [NAL9602] No Fault, FailCount= 2
2018-05-21T14:27:49.868Z,1526912869.868 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:28:01.068Z,1526912881.068 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:29:07.739Z,1526912947.739 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:29:07.739Z,1526912947.739 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T14:29:07.739Z,1526912947.739 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:29:07.764Z,1526912947.764 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:29:08.147Z,1526912948.147 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:29:08.147Z,1526912948.147 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T14:29:08.514Z,1526912948.514 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:29:08.518Z,1526912948.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:29:08.519Z,1526912948.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:32:04.243Z,1526913124.243 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T14:27:03.9Z
2018-05-21T14:32:04.243Z,1526913124.243 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T14:32:04.243Z,1526913124.243 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T14:32:07.921Z,1526913127.921 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0258.lzma
2018-05-21T14:32:08.588Z,1526913128.588 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0258.lzma.bak
2018-05-21T14:32:08.588Z,1526913128.588 [DataOverHttps](INFO): SBD MOMSN=8288328
2018-05-21T14:32:08.683Z,1526913128.683 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:32:08.683Z,1526913128.683 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T14:32:08.684Z,1526913128.684 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:32:08.708Z,1526913128.708 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:32:09.316Z,1526913129.316 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:32:09.317Z,1526913129.317 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T14:32:09.467Z,1526913129.467 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:32:09.468Z,1526913129.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:32:09.468Z,1526913129.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:32:17.880Z,1526913137.880 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0259.lzma
2018-05-21T14:32:18.640Z,1526913138.640 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0259.lzma.bak
2018-05-21T14:32:18.640Z,1526913138.640 [DataOverHttps](INFO): SBD MOMSN=8288330
2018-05-21T14:32:19.475Z,1526913139.475 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T14:32:19.475Z,1526913139.475 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T14:32:19.475Z,1526913139.475 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T14:33:07.491Z,1526913187.491 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T14:33:38.283Z,1526913218.283 [NAL9602](INFO): Powering down
2018-05-21T14:34:40.831Z,1526913280.831 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T14:35:09.624Z,1526913309.624 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:35:09.624Z,1526913309.624 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T14:35:09.624Z,1526913309.624 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:35:09.681Z,1526913309.681 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:35:10.060Z,1526913310.060 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:35:10.060Z,1526913310.060 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T14:35:10.403Z,1526913310.403 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:35:10.403Z,1526913310.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:35:10.404Z,1526913310.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:36:58.527Z,1526913418.527 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.402385 seconds old.
2018-05-21T14:36:58.529Z,1526913418.529 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.402826 seconds old.
2018-05-21T14:36:58.928Z,1526913418.928 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.803421 seconds old.
2018-05-21T14:36:58.930Z,1526913418.930 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.803834 seconds old.
2018-05-21T14:36:59.303Z,1526913419.303 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.178875 seconds old.
2018-05-21T14:36:59.305Z,1526913419.305 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.179274 seconds old.
2018-05-21T14:36:59.726Z,1526913419.726 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.585412 seconds old.
2018-05-21T14:36:59.728Z,1526913419.728 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.602034 seconds old.
2018-05-21T14:37:00.108Z,1526913420.108 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.983444 seconds old.
2018-05-21T14:37:00.110Z,1526913420.110 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.983841 seconds old.
2018-05-21T14:37:00.508Z,1526913420.508 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.383639 seconds old.
2018-05-21T14:37:00.511Z,1526913420.511 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.384033 seconds old.
2018-05-21T14:37:00.911Z,1526913420.911 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.786376 seconds old.
2018-05-21T14:37:00.913Z,1526913420.913 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.786790 seconds old.
2018-05-21T14:37:01.312Z,1526913421.312 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.187648 seconds old.
2018-05-21T14:37:01.314Z,1526913421.314 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.188130 seconds old.
2018-05-21T14:37:01.710Z,1526913421.710 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.585272 seconds old.
2018-05-21T14:37:01.712Z,1526913421.712 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.585752 seconds old.
2018-05-21T14:37:02.116Z,1526913422.116 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.991061 seconds old.
2018-05-21T14:37:02.118Z,1526913422.118 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.991456 seconds old.
2018-05-21T14:37:02.546Z,1526913422.546 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.421454 seconds old.
2018-05-21T14:37:02.550Z,1526913422.550 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.422640 seconds old.
2018-05-21T14:37:02.910Z,1526913422.910 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.785869 seconds old.
2018-05-21T14:37:02.912Z,1526913422.912 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.786284 seconds old.
2018-05-21T14:37:03.313Z,1526913423.313 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.188079 seconds old.
2018-05-21T14:37:03.315Z,1526913423.315 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.188702 seconds old.
2018-05-21T14:37:03.710Z,1526913423.710 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.585958 seconds old.
2018-05-21T14:37:03.713Z,1526913423.713 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.586373 seconds old.
2018-05-21T14:37:04.110Z,1526913424.110 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.985498 seconds old.
2018-05-21T14:37:04.112Z,1526913424.112 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.985983 seconds old.
2018-05-21T14:37:04.515Z,1526913424.515 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.390774 seconds old.
2018-05-21T14:37:04.517Z,1526913424.517 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.391188 seconds old.
2018-05-21T14:37:04.911Z,1526913424.911 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.786282 seconds old.
2018-05-21T14:37:04.913Z,1526913424.913 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.786688 seconds old.
2018-05-21T14:37:05.311Z,1526913425.311 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.186619 seconds old.
2018-05-21T14:37:05.313Z,1526913425.313 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.187017 seconds old.
2018-05-21T14:37:05.713Z,1526913425.713 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.588818 seconds old.
2018-05-21T14:37:05.716Z,1526913425.716 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.589461 seconds old.
2018-05-21T14:37:06.112Z,1526913426.112 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.987912 seconds old.
2018-05-21T14:37:06.115Z,1526913426.115 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.988393 seconds old.
2018-05-21T14:37:06.511Z,1526913426.511 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.386416 seconds old.
2018-05-21T14:37:06.513Z,1526913426.513 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.386829 seconds old.
2018-05-21T14:37:06.915Z,1526913426.915 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.790688 seconds old.
2018-05-21T14:37:06.917Z,1526913426.917 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.791116 seconds old.
2018-05-21T14:37:07.310Z,1526913427.310 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.185165 seconds old.
2018-05-21T14:37:07.312Z,1526913427.312 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.185655 seconds old.
2018-05-21T14:37:07.711Z,1526913427.711 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.586916 seconds old.
2018-05-21T14:37:07.714Z,1526913427.714 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.587316 seconds old.
2018-05-21T14:37:08.118Z,1526913428.118 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.993580 seconds old.
2018-05-21T14:37:08.120Z,1526913428.120 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.994206 seconds old.
2018-05-21T14:37:08.519Z,1526913428.519 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.394018 seconds old.
2018-05-21T14:37:08.521Z,1526913428.521 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.394479 seconds old.
2018-05-21T14:37:08.909Z,1526913428.909 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.784430 seconds old.
2018-05-21T14:37:08.911Z,1526913428.911 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.784969 seconds old.
2018-05-21T14:37:09.313Z,1526913429.313 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.188787 seconds old.
2018-05-21T14:37:09.316Z,1526913429.316 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.189466 seconds old.
2018-05-21T14:37:09.711Z,1526913429.711 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.586792 seconds old.
2018-05-21T14:37:09.713Z,1526913429.713 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.587248 seconds old.
2018-05-21T14:37:10.121Z,1526913430.121 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.996382 seconds old.
2018-05-21T14:37:10.123Z,1526913430.123 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.996926 seconds old.
2018-05-21T14:37:10.515Z,1526913430.515 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.390162 seconds old.
2018-05-21T14:37:10.517Z,1526913430.517 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.390613 seconds old.
2018-05-21T14:37:10.920Z,1526913430.920 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.795772 seconds old.
2018-05-21T14:37:10.923Z,1526913430.923 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.796302 seconds old.
2018-05-21T14:37:11.322Z,1526913431.322 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.197140 seconds old.
2018-05-21T14:37:11.324Z,1526913431.324 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.197666 seconds old.
2018-05-21T14:37:11.713Z,1526913431.713 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.588845 seconds old.
2018-05-21T14:37:11.716Z,1526913431.716 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.589531 seconds old.
2018-05-21T14:37:12.112Z,1526913432.112 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.987765 seconds old.
2018-05-21T14:37:12.115Z,1526913432.115 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.988301 seconds old.
2018-05-21T14:37:12.514Z,1526913432.514 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.389295 seconds old.
2018-05-21T14:37:12.516Z,1526913432.516 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.389825 seconds old.
2018-05-21T14:37:12.934Z,1526913432.934 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.805366 seconds old.
2018-05-21T14:37:12.936Z,1526913432.936 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.810018 seconds old.
2018-05-21T14:37:13.323Z,1526913433.323 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.198367 seconds old.
2018-05-21T14:37:13.325Z,1526913433.325 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.198813 seconds old.
2018-05-21T14:37:13.720Z,1526913433.720 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.595007 seconds old.
2018-05-21T14:37:13.722Z,1526913433.722 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.595464 seconds old.
2018-05-21T14:37:14.124Z,1526913434.124 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.999805 seconds old.
2018-05-21T14:37:14.131Z,1526913434.131 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.004414 seconds old.
2018-05-21T14:37:14.527Z,1526913434.527 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.402371 seconds old.
2018-05-21T14:37:14.529Z,1526913434.529 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.402814 seconds old.
2018-05-21T14:37:14.921Z,1526913434.921 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.796843 seconds old.
2018-05-21T14:37:14.935Z,1526913434.935 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.808426 seconds old.
2018-05-21T14:37:15.305Z,1526913435.305 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.180094 seconds old.
2018-05-21T14:37:15.323Z,1526913435.323 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.197245 seconds old.
2018-05-21T14:37:15.734Z,1526913435.734 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.609150 seconds old.
2018-05-21T14:37:15.736Z,1526913435.736 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.609682 seconds old.
2018-05-21T14:37:16.106Z,1526913436.106 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.981683 seconds old.
2018-05-21T14:37:16.108Z,1526913436.108 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.982197 seconds old.
2018-05-21T14:37:16.506Z,1526913436.506 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.381574 seconds old.
2018-05-21T14:37:16.508Z,1526913436.508 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.382235 seconds old.
2018-05-21T14:37:16.909Z,1526913436.909 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.784209 seconds old.
2018-05-21T14:37:16.911Z,1526913436.911 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.784743 seconds old.
2018-05-21T14:37:17.309Z,1526913437.309 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.184890 seconds old.
2018-05-21T14:37:17.312Z,1526913437.312 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.185419 seconds old.
2018-05-21T14:37:17.712Z,1526913437.712 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.587431 seconds old.
2018-05-21T14:37:17.714Z,1526913437.714 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.587872 seconds old.
2018-05-21T14:37:18.117Z,1526913438.117 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.992173 seconds old.
2018-05-21T14:37:18.119Z,1526913438.119 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.992697 seconds old.
2018-05-21T14:37:18.511Z,1526913438.511 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.385944 seconds old.
2018-05-21T14:37:18.513Z,1526913438.513 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.386387 seconds old.
2018-05-21T14:37:18.913Z,1526913438.913 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.787989 seconds old.
2018-05-21T14:37:18.915Z,1526913438.915 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.788656 seconds old.
2018-05-21T14:37:19.311Z,1526913439.311 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.186780 seconds old.
2018-05-21T14:37:19.313Z,1526913439.313 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.187218 seconds old.
2018-05-21T14:37:19.712Z,1526913439.712 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.587292 seconds old.
2018-05-21T14:37:19.714Z,1526913439.714 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.587733 seconds old.
2018-05-21T14:37:19.716Z,1526913439.716 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T14:37:19.717Z,1526913439.717 [Default:CheckIn:C.Wait] Stopped
2018-05-21T14:37:19.717Z,1526913439.717 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T14:37:19.717Z,1526913439.717 [Default:CheckIn:D] Running Loop=1
2018-05-21T14:37:20.110Z,1526913440.110 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.985696 seconds old.
2018-05-21T14:37:20.113Z,1526913440.113 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.986343 seconds old.
2018-05-21T14:37:20.116Z,1526913440.116 [Default:CheckIn:D] Stopped
2018-05-21T14:37:20.116Z,1526913440.116 [Default:CheckIn:E] Running Loop=1
2018-05-21T14:37:20.513Z,1526913440.513 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.388502 seconds old.
2018-05-21T14:37:20.515Z,1526913440.515 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.389036 seconds old.
2018-05-21T14:37:20.519Z,1526913440.519 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 895.784570 min 
2018-05-21T14:37:20.519Z,1526913440.519 [Default:CheckIn:E] Stopped
2018-05-21T14:37:20.519Z,1526913440.519 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T14:37:20.519Z,1526913440.519 [Default:CheckIn] Stopped
2018-05-21T14:37:20.519Z,1526913440.519 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T14:37:20.519Z,1526913440.519 [Default:CheckIn](INFO): Running loop #88
2018-05-21T14:37:20.520Z,1526913440.520 [Default:CheckIn] Running Loop=88
2018-05-21T14:37:20.520Z,1526913440.520 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T14:37:20.520Z,1526913440.520 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T14:37:20.912Z,1526913440.912 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.787880 seconds old.
2018-05-21T14:37:20.915Z,1526913440.915 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.788429 seconds old.
2018-05-21T14:37:23.986Z,1526913443.986 [NAL9602](INFO): Powering up
2018-05-21T14:37:24.030Z,1526913444.030 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.905540 seconds old.
2018-05-21T14:37:24.032Z,1526913444.032 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.906203 seconds old.
2018-05-21T14:37:24.151Z,1526913444.151 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.026789 seconds old.
2018-05-21T14:37:24.153Z,1526913444.153 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.027256 seconds old.
2018-05-21T14:37:24.532Z,1526913444.532 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.407464 seconds old.
2018-05-21T14:37:24.534Z,1526913444.534 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.407909 seconds old.
2018-05-21T14:37:24.924Z,1526913444.924 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.799158 seconds old.
2018-05-21T14:37:24.926Z,1526913444.926 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.799631 seconds old.
2018-05-21T14:37:25.327Z,1526913445.327 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.202912 seconds old.
2018-05-21T14:37:25.330Z,1526913445.330 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.203347 seconds old.
2018-05-21T14:37:25.732Z,1526913445.732 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.607458 seconds old.
2018-05-21T14:37:25.734Z,1526913445.734 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.607893 seconds old.
2018-05-21T14:37:26.125Z,1526913446.125 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.000487 seconds old.
2018-05-21T14:37:26.127Z,1526913446.127 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.001022 seconds old.
2018-05-21T14:37:26.532Z,1526913446.532 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.407738 seconds old.
2018-05-21T14:37:26.535Z,1526913446.535 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.408394 seconds old.
2018-05-21T14:37:26.926Z,1526913446.926 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.801825 seconds old.
2018-05-21T14:37:26.928Z,1526913446.928 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.802278 seconds old.
2018-05-21T14:37:27.326Z,1526913447.326 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.201905 seconds old.
2018-05-21T14:37:27.329Z,1526913447.329 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.202372 seconds old.
2018-05-21T14:37:27.725Z,1526913447.725 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.600608 seconds old.
2018-05-21T14:37:27.728Z,1526913447.728 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.601299 seconds old.
2018-05-21T14:37:28.136Z,1526913448.136 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.011442 seconds old.
2018-05-21T14:37:28.138Z,1526913448.138 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.011881 seconds old.
2018-05-21T14:37:28.527Z,1526913448.527 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.402911 seconds old.
2018-05-21T14:37:28.530Z,1526913448.530 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.403355 seconds old.
2018-05-21T14:37:28.936Z,1526913448.936 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.811750 seconds old.
2018-05-21T14:37:28.943Z,1526913448.943 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.816552 seconds old.
2018-05-21T14:37:29.326Z,1526913449.326 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.201282 seconds old.
2018-05-21T14:37:29.328Z,1526913449.328 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.202211 seconds old.
2018-05-21T14:37:29.732Z,1526913449.732 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.607453 seconds old.
2018-05-21T14:37:29.734Z,1526913449.734 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.607898 seconds old.
2018-05-21T14:37:30.127Z,1526913450.127 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.002600 seconds old.
2018-05-21T14:37:30.129Z,1526913450.129 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.003026 seconds old.
2018-05-21T14:37:30.532Z,1526913450.532 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.407460 seconds old.
2018-05-21T14:37:30.534Z,1526913450.534 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.407905 seconds old.
2018-05-21T14:37:30.935Z,1526913450.935 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 32.810206 seconds old.
2018-05-21T14:37:30.937Z,1526913450.937 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 32.810665 seconds old.
2018-05-21T14:37:31.328Z,1526913451.328 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.203332 seconds old.
2018-05-21T14:37:31.330Z,1526913451.330 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.203773 seconds old.
2018-05-21T14:37:31.736Z,1526913451.736 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 33.611575 seconds old.
2018-05-21T14:37:31.738Z,1526913451.738 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 33.612026 seconds old.
2018-05-21T14:37:32.136Z,1526913452.136 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.011035 seconds old.
2018-05-21T14:37:32.138Z,1526913452.138 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.011466 seconds old.
2018-05-21T14:37:32.528Z,1526913452.528 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.403621 seconds old.
2018-05-21T14:37:32.530Z,1526913452.530 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.404208 seconds old.
2018-05-21T14:37:32.933Z,1526913452.933 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.807966 seconds old.
2018-05-21T14:37:32.935Z,1526913452.935 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.808503 seconds old.
2018-05-21T14:37:33.336Z,1526913453.336 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.211768 seconds old.
2018-05-21T14:37:33.339Z,1526913453.339 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.212302 seconds old.
2018-05-21T14:37:33.728Z,1526913453.728 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.603006 seconds old.
2018-05-21T14:37:33.730Z,1526913453.730 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.603459 seconds old.
2018-05-21T14:37:34.136Z,1526913454.136 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.011440 seconds old.
2018-05-21T14:37:34.138Z,1526913454.138 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.011881 seconds old.
2018-05-21T14:37:34.540Z,1526913454.540 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.415471 seconds old.
2018-05-21T14:37:34.542Z,1526913454.542 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.415914 seconds old.
2018-05-21T14:37:34.888Z,1526913454.888 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:37:34.933Z,1526913454.933 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 36.808447 seconds old.
2018-05-21T14:37:34.935Z,1526913454.935 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 36.809142 seconds old.
2018-05-21T14:37:35.337Z,1526913455.337 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.212280 seconds old.
2018-05-21T14:37:35.339Z,1526913455.339 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 37.212820 seconds old.
2018-05-21T14:37:35.737Z,1526913455.737 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 37.612319 seconds old.
2018-05-21T14:37:35.739Z,1526913455.739 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 37.612863 seconds old.
2018-05-21T14:37:36.148Z,1526913456.148 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 38.023929 seconds old.
2018-05-21T14:37:36.151Z,1526913456.151 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 38.024559 seconds old.
2018-05-21T14:37:36.540Z,1526913456.540 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 38.415486 seconds old.
2018-05-21T14:37:36.542Z,1526913456.542 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 38.415911 seconds old.
2018-05-21T14:37:36.938Z,1526913456.938 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 38.813780 seconds old.
2018-05-21T14:37:36.940Z,1526913456.940 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 38.814252 seconds old.
2018-05-21T14:37:37.328Z,1526913457.328 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 39.203543 seconds old.
2018-05-21T14:37:37.330Z,1526913457.330 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 39.203976 seconds old.
2018-05-21T14:37:37.735Z,1526913457.735 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 39.610025 seconds old.
2018-05-21T14:37:37.737Z,1526913457.737 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 39.610480 seconds old.
2018-05-21T14:37:38.129Z,1526913458.129 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 40.004823 seconds old.
2018-05-21T14:37:38.132Z,1526913458.132 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 40.005355 seconds old.
2018-05-21T14:37:38.529Z,1526913458.529 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 40.403981 seconds old.
2018-05-21T14:37:38.531Z,1526913458.531 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 40.404614 seconds old.
2018-05-21T14:37:38.936Z,1526913458.936 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 40.811471 seconds old.
2018-05-21T14:37:38.938Z,1526913458.938 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 40.811917 seconds old.
2018-05-21T14:37:39.333Z,1526913459.333 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 41.207979 seconds old.
2018-05-21T14:37:39.335Z,1526913459.335 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 41.208506 seconds old.
2018-05-21T14:37:39.729Z,1526913459.729 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 41.603952 seconds old.
2018-05-21T14:37:39.731Z,1526913459.731 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 41.604597 seconds old.
2018-05-21T14:37:40.137Z,1526913460.137 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 42.012205 seconds old.
2018-05-21T14:37:40.139Z,1526913460.139 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 42.012740 seconds old.
2018-05-21T14:37:40.532Z,1526913460.532 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 42.407462 seconds old.
2018-05-21T14:37:40.534Z,1526913460.534 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 42.407907 seconds old.
2018-05-21T14:37:40.929Z,1526913460.929 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 42.804051 seconds old.
2018-05-21T14:37:40.931Z,1526913460.931 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 42.804706 seconds old.
2018-05-21T14:37:41.332Z,1526913461.332 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 43.206949 seconds old.
2018-05-21T14:37:41.334Z,1526913461.334 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 43.207409 seconds old.
2018-05-21T14:37:41.728Z,1526913461.728 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 43.603743 seconds old.
2018-05-21T14:37:41.730Z,1526913461.730 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 43.604260 seconds old.
2018-05-21T14:37:42.127Z,1526913462.127 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 44.002789 seconds old.
2018-05-21T14:37:42.129Z,1526913462.129 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 44.003236 seconds old.
2018-05-21T14:37:42.534Z,1526913462.534 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 44.409333 seconds old.
2018-05-21T14:37:42.536Z,1526913462.536 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 44.409863 seconds old.
2018-05-21T14:37:42.944Z,1526913462.944 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 44.819184 seconds old.
2018-05-21T14:37:42.946Z,1526913462.946 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 44.819965 seconds old.
2018-05-21T14:37:43.333Z,1526913463.333 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 45.208582 seconds old.
2018-05-21T14:37:43.340Z,1526913463.340 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 45.213272 seconds old.
2018-05-21T14:37:43.742Z,1526913463.742 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 45.617420 seconds old.
2018-05-21T14:37:43.744Z,1526913463.744 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 45.618248 seconds old.
2018-05-21T14:37:44.119Z,1526913464.119 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 45.994834 seconds old.
2018-05-21T14:37:44.121Z,1526913464.121 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 45.995273 seconds old.
2018-05-21T14:37:44.521Z,1526913464.521 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 46.396221 seconds old.
2018-05-21T14:37:44.523Z,1526913464.523 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 46.396902 seconds old.
2018-05-21T14:37:44.926Z,1526913464.926 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 46.800959 seconds old.
2018-05-21T14:37:44.952Z,1526913464.952 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 46.825533 seconds old.
2018-05-21T14:37:45.324Z,1526913465.324 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 47.199626 seconds old.
2018-05-21T14:37:45.326Z,1526913465.326 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 47.200129 seconds old.
2018-05-21T14:37:45.728Z,1526913465.728 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 47.602931 seconds old.
2018-05-21T14:37:45.730Z,1526913465.730 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 47.603375 seconds old.
2018-05-21T14:37:46.124Z,1526913466.124 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 47.999812 seconds old.
2018-05-21T14:37:46.127Z,1526913466.127 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 48.000443 seconds old.
2018-05-21T14:37:46.527Z,1526913466.527 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 48.401967 seconds old.
2018-05-21T14:37:46.529Z,1526913466.529 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 48.402427 seconds old.
2018-05-21T14:37:46.927Z,1526913466.927 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 48.802617 seconds old.
2018-05-21T14:37:46.929Z,1526913466.929 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 48.803067 seconds old.
2018-05-21T14:37:47.327Z,1526913467.327 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 49.202196 seconds old.
2018-05-21T14:37:47.329Z,1526913467.329 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 49.202653 seconds old.
2018-05-21T14:37:47.728Z,1526913467.728 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 49.603651 seconds old.
2018-05-21T14:37:47.730Z,1526913467.730 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 49.604162 seconds old.
2018-05-21T14:37:48.137Z,1526913468.137 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 50.012413 seconds old.
2018-05-21T14:37:48.143Z,1526913468.143 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 50.017119 seconds old.
2018-05-21T14:37:48.531Z,1526913468.531 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 50.406081 seconds old.
2018-05-21T14:37:48.533Z,1526913468.533 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 50.406536 seconds old.
2018-05-21T14:37:48.932Z,1526913468.932 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 50.807464 seconds old.
2018-05-21T14:37:48.934Z,1526913468.934 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 50.807910 seconds old.
2018-05-21T14:37:49.338Z,1526913469.338 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 51.213687 seconds old.
2018-05-21T14:37:49.341Z,1526913469.341 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 51.214326 seconds old.
2018-05-21T14:37:49.732Z,1526913469.732 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 51.607757 seconds old.
2018-05-21T14:37:49.735Z,1526913469.735 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 51.608409 seconds old.
2018-05-21T14:37:50.127Z,1526913470.127 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 52.002907 seconds old.
2018-05-21T14:37:50.130Z,1526913470.130 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 52.003340 seconds old.
2018-05-21T14:37:50.530Z,1526913470.530 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 52.405549 seconds old.
2018-05-21T14:37:50.533Z,1526913470.533 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 52.406334 seconds old.
2018-05-21T14:37:50.933Z,1526913470.933 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 52.808075 seconds old.
2018-05-21T14:37:50.939Z,1526913470.939 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 52.812880 seconds old.
2018-05-21T14:37:51.329Z,1526913471.329 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 53.204918 seconds old.
2018-05-21T14:37:51.332Z,1526913471.332 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 53.205459 seconds old.
2018-05-21T14:37:51.728Z,1526913471.728 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 53.603494 seconds old.
2018-05-21T14:37:51.730Z,1526913471.730 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 53.603948 seconds old.
2018-05-21T14:37:52.135Z,1526913472.135 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 54.010197 seconds old.
2018-05-21T14:37:52.137Z,1526913472.137 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 54.010677 seconds old.
2018-05-21T14:37:52.530Z,1526913472.530 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 54.405415 seconds old.
2018-05-21T14:37:52.532Z,1526913472.532 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 54.405937 seconds old.
2018-05-21T14:37:52.933Z,1526913472.933 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 54.808292 seconds old.
2018-05-21T14:37:52.935Z,1526913472.935 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 54.808971 seconds old.
2018-05-21T14:37:53.329Z,1526913473.329 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 55.204566 seconds old.
2018-05-21T14:37:53.331Z,1526913473.331 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 55.205260 seconds old.
2018-05-21T14:37:53.736Z,1526913473.736 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 55.611771 seconds old.
2018-05-21T14:37:53.739Z,1526913473.739 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 55.612318 seconds old.
2018-05-21T14:37:54.132Z,1526913474.132 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 56.006948 seconds old.
2018-05-21T14:37:54.134Z,1526913474.134 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 56.007395 seconds old.
2018-05-21T14:37:54.536Z,1526913474.536 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 56.411173 seconds old.
2018-05-21T14:37:54.538Z,1526913474.538 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 56.411621 seconds old.
2018-05-21T14:37:54.929Z,1526913474.929 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 56.803969 seconds old.
2018-05-21T14:37:54.931Z,1526913474.931 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 56.804492 seconds old.
2018-05-21T14:37:55.338Z,1526913475.338 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 57.209659 seconds old.
2018-05-21T14:37:55.341Z,1526913475.341 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 57.214321 seconds old.
2018-05-21T14:37:55.729Z,1526913475.729 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 57.604686 seconds old.
2018-05-21T14:37:55.732Z,1526913475.732 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 57.605916 seconds old.
2018-05-21T14:37:56.139Z,1526913476.139 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 58.014807 seconds old.
2018-05-21T14:37:56.141Z,1526913476.141 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 58.015254 seconds old.
2018-05-21T14:37:56.528Z,1526913476.528 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 58.403377 seconds old.
2018-05-21T14:37:56.532Z,1526913476.532 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 58.403831 seconds old.
2018-05-21T14:37:56.932Z,1526913476.932 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 58.807478 seconds old.
2018-05-21T14:37:56.935Z,1526913476.935 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 58.807925 seconds old.
2018-05-21T14:37:57.334Z,1526913477.334 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 59.209844 seconds old.
2018-05-21T14:37:57.337Z,1526913477.337 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 59.210301 seconds old.
2018-05-21T14:37:57.730Z,1526913477.730 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 59.605210 seconds old.
2018-05-21T14:37:57.732Z,1526913477.732 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 59.605876 seconds old.
2018-05-21T14:37:58.136Z,1526913478.136 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 60.011728 seconds old.
2018-05-21T14:37:58.139Z,1526913478.139 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 60.012356 seconds old.
2018-05-21T14:37:58.533Z,1526913478.533 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 60.408280 seconds old.
2018-05-21T14:37:58.535Z,1526913478.535 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 60.408814 seconds old.
2018-05-21T14:37:58.929Z,1526913478.929 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 60.804241 seconds old.
2018-05-21T14:37:58.931Z,1526913478.931 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 60.804919 seconds old.
2018-05-21T14:37:59.341Z,1526913479.341 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 61.216038 seconds old.
2018-05-21T14:37:59.347Z,1526913479.347 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 61.220712 seconds old.
2018-05-21T14:37:59.735Z,1526913479.735 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 61.610931 seconds old.
2018-05-21T14:37:59.738Z,1526913479.738 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 61.611370 seconds old.
2018-05-21T14:38:00.136Z,1526913480.136 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 62.011811 seconds old.
2018-05-21T14:38:00.143Z,1526913480.143 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 62.016466 seconds old.
2018-05-21T14:38:00.533Z,1526913480.533 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 62.408172 seconds old.
2018-05-21T14:38:00.543Z,1526913480.543 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 62.416837 seconds old.
2018-05-21T14:38:00.955Z,1526913480.955 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 62.830264 seconds old.
2018-05-21T14:38:00.957Z,1526913480.957 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 62.830731 seconds old.
2018-05-21T14:38:01.345Z,1526913481.345 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 63.220298 seconds old.
2018-05-21T14:38:01.351Z,1526913481.351 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 63.225196 seconds old.
2018-05-21T14:38:01.724Z,1526913481.724 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 63.599724 seconds old.
2018-05-21T14:38:01.743Z,1526913481.743 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 63.616273 seconds old.
2018-05-21T14:38:02.126Z,1526913482.126 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 64.001221 seconds old.
2018-05-21T14:38:02.128Z,1526913482.128 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 64.001731 seconds old.
2018-05-21T14:38:02.527Z,1526913482.527 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 64.402412 seconds old.
2018-05-21T14:38:02.529Z,1526913482.529 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 64.402873 seconds old.
2018-05-21T14:38:02.927Z,1526913482.927 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 64.802822 seconds old.
2018-05-21T14:38:02.929Z,1526913482.929 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 64.803271 seconds old.
2018-05-21T14:38:03.332Z,1526913483.332 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 65.207440 seconds old.
2018-05-21T14:38:03.334Z,1526913483.334 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 65.207889 seconds old.
2018-05-21T14:38:03.728Z,1526913483.728 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 65.603798 seconds old.
2018-05-21T14:38:03.739Z,1526913483.739 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 65.612308 seconds old.
2018-05-21T14:38:04.139Z,1526913484.139 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 66.014211 seconds old.
2018-05-21T14:38:04.141Z,1526913484.141 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 66.014666 seconds old.
2018-05-21T14:38:04.527Z,1526913484.527 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 66.402527 seconds old.
2018-05-21T14:38:04.529Z,1526913484.529 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 66.402982 seconds old.
2018-05-21T14:38:04.930Z,1526913484.930 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 66.805489 seconds old.
2018-05-21T14:38:04.932Z,1526913484.932 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 66.806167 seconds old.
2018-05-21T14:38:05.331Z,1526913485.331 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 67.206893 seconds old.
2018-05-21T14:38:05.334Z,1526913485.334 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 67.207333 seconds old.
2018-05-21T14:38:05.727Z,1526913485.727 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 67.602547 seconds old.
2018-05-21T14:38:05.729Z,1526913485.729 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 67.602996 seconds old.
2018-05-21T14:38:06.128Z,1526913486.128 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 68.003577 seconds old.
2018-05-21T14:38:06.130Z,1526913486.130 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 68.004018 seconds old.
2018-05-21T14:38:06.533Z,1526913486.533 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 68.408801 seconds old.
2018-05-21T14:38:06.536Z,1526913486.536 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 68.409512 seconds old.
2018-05-21T14:38:06.889Z,1526913486.889 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T14:38:06.970Z,1526913486.970 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T14:38:06.970Z,1526913486.970 [NAL9602] Data Fault, FailCount= 3
2018-05-21T14:38:06.970Z,1526913486.970 [NAL9602](ERROR): Data Fault
2018-05-21T14:38:07.026Z,1526913487.026 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 68.901270 seconds old.
2018-05-21T14:38:07.039Z,1526913487.039 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 68.912406 seconds old.
2018-05-21T14:38:07.060Z,1526913487.060 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:38:07.288Z,1526913487.288 [NAL9602](INFO): Powering down
2018-05-21T14:38:07.340Z,1526913487.340 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 69.215823 seconds old.
2018-05-21T14:38:07.343Z,1526913487.343 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 69.216465 seconds old.
2018-05-21T14:38:07.738Z,1526913487.738 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 69.613584 seconds old.
2018-05-21T14:38:07.740Z,1526913487.740 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 69.614105 seconds old.
2018-05-21T14:38:08.141Z,1526913488.141 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 70.015997 seconds old.
2018-05-21T14:38:08.143Z,1526913488.143 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 70.016548 seconds old.
2018-05-21T14:38:08.156Z,1526913488.156 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:38:08.156Z,1526913488.156 [NAL9602] No Fault, FailCount= 3
2018-05-21T14:38:08.538Z,1526913488.538 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 70.413495 seconds old.
2018-05-21T14:38:08.540Z,1526913488.540 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 70.414158 seconds old.
2018-05-21T14:38:08.938Z,1526913488.938 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 70.813540 seconds old.
2018-05-21T14:38:08.940Z,1526913488.940 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 70.814068 seconds old.
2018-05-21T14:38:09.338Z,1526913489.338 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 71.213486 seconds old.
2018-05-21T14:38:09.340Z,1526913489.340 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 71.214150 seconds old.
2018-05-21T14:38:09.739Z,1526913489.739 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 71.614070 seconds old.
2018-05-21T14:38:09.741Z,1526913489.741 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 71.614546 seconds old.
2018-05-21T14:38:10.131Z,1526913490.131 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 72.006917 seconds old.
2018-05-21T14:38:10.134Z,1526913490.134 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 72.007353 seconds old.
2018-05-21T14:38:10.538Z,1526913490.538 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 72.413478 seconds old.
2018-05-21T14:38:10.540Z,1526913490.540 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 72.414014 seconds old.
2018-05-21T14:38:10.541Z,1526913490.541 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:38:10.541Z,1526913490.541 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T14:38:10.541Z,1526913490.541 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:38:10.554Z,1526913490.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:38:10.939Z,1526913490.939 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 72.813998 seconds old.
2018-05-21T14:38:10.953Z,1526913490.953 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:38:10.953Z,1526913490.953 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T14:38:11.338Z,1526913491.338 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 73.212948 seconds old.
2018-05-21T14:38:11.339Z,1526913491.339 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:38:11.340Z,1526913491.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:38:11.340Z,1526913491.340 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:38:11.739Z,1526913491.739 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 73.614119 seconds old.
2018-05-21T14:38:11.741Z,1526913491.741 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 73.614581 seconds old.
2018-05-21T14:38:12.138Z,1526913492.138 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 74.013582 seconds old.
2018-05-21T14:38:12.140Z,1526913492.140 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 74.014248 seconds old.
2018-05-21T14:38:12.538Z,1526913492.538 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 74.413066 seconds old.
2018-05-21T14:38:12.540Z,1526913492.540 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 74.413602 seconds old.
2018-05-21T14:38:12.940Z,1526913492.940 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 74.815622 seconds old.
2018-05-21T14:38:12.942Z,1526913492.942 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 74.816166 seconds old.
2018-05-21T14:38:13.334Z,1526913493.334 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 75.209625 seconds old.
2018-05-21T14:38:13.336Z,1526913493.336 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 75.210268 seconds old.
2018-05-21T14:38:13.732Z,1526913493.732 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 75.607788 seconds old.
2018-05-21T14:38:13.735Z,1526913493.735 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 75.608320 seconds old.
2018-05-21T14:38:14.138Z,1526913494.138 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 76.013430 seconds old.
2018-05-21T14:38:14.140Z,1526913494.140 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 76.013974 seconds old.
2018-05-21T14:38:14.535Z,1526913494.535 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 76.410697 seconds old.
2018-05-21T14:38:14.537Z,1526913494.537 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 76.411168 seconds old.
2018-05-21T14:38:14.938Z,1526913494.938 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 76.812947 seconds old.
2018-05-21T14:38:14.940Z,1526913494.940 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 76.813473 seconds old.
2018-05-21T14:38:15.338Z,1526913495.338 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 77.213258 seconds old.
2018-05-21T14:38:15.340Z,1526913495.340 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 77.213785 seconds old.
2018-05-21T14:38:15.717Z,1526913495.717 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 77.592144 seconds old.
2018-05-21T14:38:15.727Z,1526913495.727 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 77.600808 seconds old.
2018-05-21T14:38:16.142Z,1526913496.142 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 78.017310 seconds old.
2018-05-21T14:38:16.144Z,1526913496.144 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 78.017838 seconds old.
2018-05-21T14:38:16.521Z,1526913496.521 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 78.396441 seconds old.
2018-05-21T14:38:16.547Z,1526913496.547 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 78.421089 seconds old.
2018-05-21T14:38:16.948Z,1526913496.948 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 78.823741 seconds old.
2018-05-21T14:38:16.955Z,1526913496.955 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 78.828540 seconds old.
2018-05-21T14:38:17.328Z,1526913497.328 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 79.203002 seconds old.
2018-05-21T14:38:17.330Z,1526913497.330 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 79.203454 seconds old.
2018-05-21T14:38:17.720Z,1526913497.720 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 79.595573 seconds old.
2018-05-21T14:38:17.722Z,1526913497.722 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 79.596009 seconds old.
2018-05-21T14:38:18.123Z,1526913498.123 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 79.998187 seconds old.
2018-05-21T14:38:18.125Z,1526913498.125 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 79.998649 seconds old.
2018-05-21T14:38:18.528Z,1526913498.528 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 80.403553 seconds old.
2018-05-21T14:38:18.530Z,1526913498.530 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 80.403992 seconds old.
2018-05-21T14:38:18.921Z,1526913498.921 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 80.796908 seconds old.
2018-05-21T14:38:18.924Z,1526913498.924 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 80.797428 seconds old.
2018-05-21T14:38:19.327Z,1526913499.327 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 81.202390 seconds old.
2018-05-21T14:38:19.329Z,1526913499.329 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 81.202891 seconds old.
2018-05-21T14:38:19.732Z,1526913499.732 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 81.607731 seconds old.
2018-05-21T14:38:19.735Z,1526913499.735 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 81.608371 seconds old.
2018-05-21T14:38:20.126Z,1526913500.126 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 82.001260 seconds old.
2018-05-21T14:38:20.128Z,1526913500.128 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 82.001755 seconds old.
2018-05-21T14:38:20.526Z,1526913500.526 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 82.401883 seconds old.
2018-05-21T14:38:20.529Z,1526913500.529 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 82.402380 seconds old.
2018-05-21T14:38:20.927Z,1526913500.927 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 82.802852 seconds old.
2018-05-21T14:38:20.930Z,1526913500.930 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 82.803313 seconds old.
2018-05-21T14:38:24.094Z,1526913504.094 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 85.969251 seconds old.
2018-05-21T14:38:24.118Z,1526913504.118 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 85.991660 seconds old.
2018-05-21T14:38:24.232Z,1526913504.232 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 86.107750 seconds old.
2018-05-21T14:38:24.235Z,1526913504.235 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 86.108404 seconds old.
2018-05-21T14:38:37.344Z,1526913517.344 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:38:48.543Z,1526913528.543 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:38:49.344Z,1526913529.344 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T14:38:49.344Z,1526913529.344 [NAL9602] Data Fault, FailCount= 4
2018-05-21T14:38:49.344Z,1526913529.344 [NAL9602](ERROR): Data Fault
2018-05-21T14:38:49.435Z,1526913529.435 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:38:49.743Z,1526913529.743 [NAL9602](INFO): Powering down
2018-05-21T14:38:50.598Z,1526913530.598 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:38:50.598Z,1526913530.598 [NAL9602] No Fault, FailCount= 4
2018-05-21T14:39:20.144Z,1526913560.144 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:39:30.956Z,1526913570.956 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:41:11.400Z,1526913671.400 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:41:11.400Z,1526913671.400 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T14:41:11.400Z,1526913671.400 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:41:11.413Z,1526913671.413 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:41:11.413Z,1526913671.413 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:42:12.177Z,1526913732.177 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T14:42:12.177Z,1526913732.177 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T14:42:20.624Z,1526913740.624 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T14:37:20.5Z
2018-05-21T14:42:20.624Z,1526913740.624 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T14:42:20.624Z,1526913740.624 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T14:42:24.680Z,1526913744.680 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0261.lzma
2018-05-21T14:42:25.460Z,1526913745.460 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0261.lzma.bak
2018-05-21T14:42:25.460Z,1526913745.460 [DataOverHttps](INFO): SBD MOMSN=8288335
2018-05-21T14:42:34.478Z,1526913754.478 [DataOverHttps](INFO): Sending 312 bytes from file Logs/20180520T234132/Express0262.lzma
2018-05-21T14:42:35.276Z,1526913755.276 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0262.lzma.bak
2018-05-21T14:42:35.276Z,1526913755.276 [DataOverHttps](INFO): SBD MOMSN=8288337
2018-05-21T14:42:35.978Z,1526913755.978 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T14:42:35.978Z,1526913755.978 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T14:42:35.979Z,1526913755.979 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T14:42:39.303Z,1526913759.303 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T14:43:09.803Z,1526913789.803 [NAL9602](INFO): Powering down
2018-05-21T14:44:41.197Z,1526913881.197 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T14:47:36.505Z,1526914056.505 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T14:47:36.505Z,1526914056.505 [Default:CheckIn:C.Wait] Stopped
2018-05-21T14:47:36.505Z,1526914056.505 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T14:47:36.505Z,1526914056.505 [Default:CheckIn:D] Running Loop=1
2018-05-21T14:47:36.896Z,1526914056.896 [Default:CheckIn:D] Stopped
2018-05-21T14:47:36.897Z,1526914056.897 [Default:CheckIn:E] Running Loop=1
2018-05-21T14:47:37.296Z,1526914057.296 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 906.064258 min 
2018-05-21T14:47:37.297Z,1526914057.297 [Default:CheckIn:E] Stopped
2018-05-21T14:47:37.297Z,1526914057.297 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T14:47:37.297Z,1526914057.297 [Default:CheckIn] Stopped
2018-05-21T14:47:37.297Z,1526914057.297 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T14:47:37.297Z,1526914057.297 [Default:CheckIn](INFO): Running loop #89
2018-05-21T14:47:37.297Z,1526914057.297 [Default:CheckIn] Running Loop=89
2018-05-21T14:47:37.297Z,1526914057.297 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T14:47:37.297Z,1526914057.297 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T14:47:40.944Z,1526914060.944 [NAL9602](INFO): Powering up
2018-05-21T14:47:51.830Z,1526914071.830 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:48:23.435Z,1526914103.435 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T14:48:23.510Z,1526914103.510 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T14:48:23.510Z,1526914103.510 [NAL9602] Data Fault, FailCount= 5
2018-05-21T14:48:23.510Z,1526914103.510 [NAL9602](ERROR): Data Fault
2018-05-21T14:48:23.615Z,1526914103.615 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:48:23.615Z,1526914103.615 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T14:48:23.823Z,1526914103.823 [NAL9602](INFO): Powering down
2018-05-21T14:48:23.907Z,1526914103.907 [CBIT](INFO): Critical error at 20180521T144823
2018-05-21T14:50:23.866Z,1526914223.866 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:50:23.866Z,1526914223.866 [NAL9602] No Fault, FailCount= 5
2018-05-21T14:50:24.207Z,1526914224.207 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:50:35.408Z,1526914235.408 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:50:36.208Z,1526914236.208 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T14:50:36.208Z,1526914236.208 [NAL9602] Data Fault, FailCount= 1
2018-05-21T14:50:36.208Z,1526914236.208 [NAL9602](ERROR): Data Fault
2018-05-21T14:50:36.287Z,1526914236.287 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:50:36.607Z,1526914236.607 [NAL9602](INFO): Powering down
2018-05-21T14:50:37.459Z,1526914237.459 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:50:37.459Z,1526914237.459 [NAL9602] No Fault, FailCount= 1
2018-05-21T14:51:06.672Z,1526914266.672 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:51:17.871Z,1526914277.871 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:51:50.837Z,1526914310.837 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T14:51:50.837Z,1526914310.837 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T14:52:37.312Z,1526914357.312 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T14:47:37.3Z
2018-05-21T14:52:37.312Z,1526914357.312 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T14:52:37.313Z,1526914357.313 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T14:52:41.628Z,1526914361.628 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0264.lzma
2018-05-21T14:52:42.400Z,1526914362.400 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0264.lzma.bak
2018-05-21T14:52:42.400Z,1526914362.400 [DataOverHttps](INFO): SBD MOMSN=8288344
2018-05-21T14:52:51.511Z,1526914371.511 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0265.lzma
2018-05-21T14:52:52.272Z,1526914372.272 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0265.lzma.bak
2018-05-21T14:52:52.272Z,1526914372.272 [DataOverHttps](INFO): SBD MOMSN=8288347
2018-05-21T14:52:53.125Z,1526914373.125 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T14:52:53.126Z,1526914373.126 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T14:52:53.126Z,1526914373.126 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T14:52:56.262Z,1526914376.262 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T14:53:26.743Z,1526914406.743 [NAL9602](INFO): Powering down
2018-05-21T14:54:41.244Z,1526914481.244 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T14:56:11.822Z,1526914571.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:56:11.822Z,1526914571.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T14:56:12.175Z,1526914572.175 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:56:12.176Z,1526914572.176 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:56:12.176Z,1526914572.176 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:57:53.435Z,1526914673.435 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T14:57:53.435Z,1526914673.435 [Default:CheckIn:C.Wait] Stopped
2018-05-21T14:57:53.435Z,1526914673.435 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T14:57:53.435Z,1526914673.435 [Default:CheckIn:D] Running Loop=1
2018-05-21T14:57:53.839Z,1526914673.839 [Default:CheckIn:D] Stopped
2018-05-21T14:57:53.839Z,1526914673.839 [Default:CheckIn:E] Running Loop=1
2018-05-21T14:57:54.238Z,1526914674.238 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 916.346615 min 
2018-05-21T14:57:54.238Z,1526914674.238 [Default:CheckIn:E] Stopped
2018-05-21T14:57:54.238Z,1526914674.238 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T14:57:54.239Z,1526914674.239 [Default:CheckIn] Stopped
2018-05-21T14:57:54.239Z,1526914674.239 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T14:57:54.239Z,1526914674.239 [Default:CheckIn](INFO): Running loop #90
2018-05-21T14:57:54.239Z,1526914674.239 [Default:CheckIn] Running Loop=90
2018-05-21T14:57:54.239Z,1526914674.239 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T14:57:54.239Z,1526914674.239 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T14:57:57.547Z,1526914677.547 [NAL9602](INFO): Powering up
2018-05-21T14:58:08.700Z,1526914688.700 [NAL9602](INFO): NAL9602 initialized
2018-05-21T14:58:40.700Z,1526914720.700 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T14:58:40.778Z,1526914720.778 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T14:58:40.778Z,1526914720.778 [NAL9602] Data Fault, FailCount= 2
2018-05-21T14:58:40.778Z,1526914720.778 [NAL9602](ERROR): Data Fault
2018-05-21T14:58:40.869Z,1526914720.869 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T14:58:41.103Z,1526914721.103 [NAL9602](INFO): Powering down
2018-05-21T14:58:41.972Z,1526914721.972 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T14:58:41.972Z,1526914721.972 [NAL9602] No Fault, FailCount= 2
2018-05-21T14:59:11.468Z,1526914751.468 [NAL9602](INFO): Powering up NAL9602
2018-05-21T14:59:12.319Z,1526914752.319 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T14:59:12.319Z,1526914752.319 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T14:59:12.320Z,1526914752.320 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T14:59:12.332Z,1526914752.332 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T14:59:12.742Z,1526914752.742 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T14:59:12.742Z,1526914752.742 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T14:59:13.102Z,1526914753.102 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T14:59:13.114Z,1526914753.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T14:59:13.115Z,1526914753.115 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T14:59:22.668Z,1526914762.668 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:02:13.176Z,1526914933.176 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:02:13.176Z,1526914933.176 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T15:02:13.176Z,1526914933.176 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:02:13.205Z,1526914933.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:02:13.586Z,1526914933.586 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:02:13.586Z,1526914933.586 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T15:02:13.971Z,1526914933.971 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:02:13.971Z,1526914933.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:02:13.972Z,1526914933.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:02:54.370Z,1526914974.370 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T14:57:54.2Z
2018-05-21T15:02:54.370Z,1526914974.370 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T15:02:54.371Z,1526914974.371 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T15:02:58.344Z,1526914978.344 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0267.lzma
2018-05-21T15:02:59.136Z,1526914979.136 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0267.lzma.bak
2018-05-21T15:02:59.136Z,1526914979.136 [DataOverHttps](INFO): SBD MOMSN=8288353
2018-05-21T15:03:08.045Z,1526914988.045 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0268.lzma
2018-05-21T15:03:08.812Z,1526914988.812 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0268.lzma.bak
2018-05-21T15:03:08.812Z,1526914988.812 [DataOverHttps](INFO): SBD MOMSN=8288355
2018-05-21T15:03:09.539Z,1526914989.539 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T15:03:09.539Z,1526914989.539 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T15:03:09.539Z,1526914989.539 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T15:03:12.726Z,1526914992.726 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T15:03:43.227Z,1526915023.227 [NAL9602](INFO): Powering down
2018-05-21T15:04:41.295Z,1526915081.295 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T15:05:17.385Z,1526915117.385 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:05:17.385Z,1526915117.385 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T15:05:17.385Z,1526915117.385 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:05:17.435Z,1526915117.435 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:05:17.620Z,1526915117.620 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:05:17.620Z,1526915117.620 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T15:05:17.927Z,1526915117.927 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:05:17.928Z,1526915117.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:05:17.928Z,1526915117.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:08:10.024Z,1526915290.024 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T15:08:10.025Z,1526915290.025 [Default:CheckIn:C.Wait] Stopped
2018-05-21T15:08:10.025Z,1526915290.025 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T15:08:10.025Z,1526915290.025 [Default:CheckIn:D] Running Loop=1
2018-05-21T15:08:10.420Z,1526915290.420 [Default:CheckIn:D] Stopped
2018-05-21T15:08:10.420Z,1526915290.420 [Default:CheckIn:E] Running Loop=1
2018-05-21T15:08:10.822Z,1526915290.822 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 926.622982 min 
2018-05-21T15:08:10.822Z,1526915290.822 [Default:CheckIn:E] Stopped
2018-05-21T15:08:10.823Z,1526915290.823 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T15:08:10.823Z,1526915290.823 [Default:CheckIn] Stopped
2018-05-21T15:08:10.823Z,1526915290.823 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T15:08:10.823Z,1526915290.823 [Default:CheckIn](INFO): Running loop #91
2018-05-21T15:08:10.823Z,1526915290.823 [Default:CheckIn] Running Loop=91
2018-05-21T15:08:10.823Z,1526915290.823 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T15:08:10.823Z,1526915290.823 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T15:08:14.285Z,1526915294.285 [NAL9602](INFO): Powering up
2018-05-21T15:08:18.015Z,1526915298.015 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:08:18.015Z,1526915298.015 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T15:08:18.015Z,1526915298.015 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:08:18.036Z,1526915298.036 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:08:18.431Z,1526915298.431 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:08:18.432Z,1526915298.432 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T15:08:18.824Z,1526915298.824 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:08:18.824Z,1526915298.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:08:18.825Z,1526915298.825 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:08:25.172Z,1526915305.172 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:08:25.972Z,1526915305.972 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T15:08:25.972Z,1526915305.972 [NAL9602] Data Fault, FailCount= 3
2018-05-21T15:08:25.972Z,1526915305.972 [NAL9602](ERROR): Data Fault
2018-05-21T15:08:26.054Z,1526915306.054 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T15:08:26.371Z,1526915306.371 [NAL9602](INFO): Powering down
2018-05-21T15:08:27.224Z,1526915307.224 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T15:08:27.224Z,1526915307.224 [NAL9602] No Fault, FailCount= 3
2018-05-21T15:08:56.772Z,1526915336.772 [NAL9602](INFO): Powering up NAL9602
2018-05-21T15:09:07.579Z,1526915347.579 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:11:19.121Z,1526915479.121 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:11:19.121Z,1526915479.121 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T15:11:19.121Z,1526915479.121 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:11:19.134Z,1526915479.134 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:11:19.534Z,1526915479.534 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:11:19.534Z,1526915479.534 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T15:11:19.923Z,1526915479.923 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:11:19.923Z,1526915479.923 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:11:19.924Z,1526915479.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:13:11.137Z,1526915591.137 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T15:08:10.8Z
2018-05-21T15:13:11.137Z,1526915591.137 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T15:13:11.137Z,1526915591.137 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T15:13:15.179Z,1526915595.179 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0270.lzma
2018-05-21T15:13:15.972Z,1526915595.972 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0270.lzma.bak
2018-05-21T15:13:15.972Z,1526915595.972 [DataOverHttps](INFO): SBD MOMSN=8288360
2018-05-21T15:13:24.767Z,1526915604.767 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0271.lzma
2018-05-21T15:13:25.568Z,1526915605.568 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0271.lzma.bak
2018-05-21T15:13:25.568Z,1526915605.568 [DataOverHttps](INFO): SBD MOMSN=8288362
2018-05-21T15:13:26.284Z,1526915606.284 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T15:13:26.284Z,1526915606.284 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T15:13:26.284Z,1526915606.284 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T15:14:10.544Z,1526915650.544 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T15:14:20.226Z,1526915660.226 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:14:20.226Z,1526915660.226 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T15:14:20.226Z,1526915660.226 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:14:20.239Z,1526915660.239 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:14:20.622Z,1526915660.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:14:20.622Z,1526915660.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T15:14:20.991Z,1526915660.991 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:14:20.992Z,1526915660.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:14:20.992Z,1526915660.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:14:41.319Z,1526915681.319 [NAL9602](INFO): Powering down
2018-05-21T15:14:41.397Z,1526915681.397 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T15:17:21.382Z,1526915841.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:17:21.382Z,1526915841.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T15:17:21.382Z,1526915841.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:17:21.423Z,1526915841.423 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:17:21.821Z,1526915841.821 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:17:21.821Z,1526915841.821 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T15:17:22.233Z,1526915842.233 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:17:22.234Z,1526915842.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:17:22.234Z,1526915842.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:18:26.589Z,1526915906.589 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T15:18:26.589Z,1526915906.589 [Default:CheckIn:C.Wait] Stopped
2018-05-21T15:18:26.589Z,1526915906.589 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T15:18:26.589Z,1526915906.589 [Default:CheckIn:D] Running Loop=1
2018-05-21T15:18:26.994Z,1526915906.994 [Default:CheckIn:D] Stopped
2018-05-21T15:18:26.995Z,1526915906.995 [Default:CheckIn:E] Running Loop=1
2018-05-21T15:18:27.396Z,1526915907.396 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 936.899219 min 
2018-05-21T15:18:27.396Z,1526915907.396 [Default:CheckIn:E] Stopped
2018-05-21T15:18:27.396Z,1526915907.396 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T15:18:27.397Z,1526915907.397 [Default:CheckIn] Stopped
2018-05-21T15:18:27.397Z,1526915907.397 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T15:18:27.397Z,1526915907.397 [Default:CheckIn](INFO): Running loop #92
2018-05-21T15:18:27.397Z,1526915907.397 [Default:CheckIn] Running Loop=92
2018-05-21T15:18:27.397Z,1526915907.397 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T15:18:27.397Z,1526915907.397 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T15:18:30.860Z,1526915910.860 [NAL9602](INFO): Powering up
2018-05-21T15:18:41.732Z,1526915921.732 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:19:13.732Z,1526915953.732 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T15:19:13.814Z,1526915953.814 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T15:19:13.814Z,1526915953.814 [NAL9602] Data Fault, FailCount= 4
2018-05-21T15:19:13.814Z,1526915953.814 [NAL9602](ERROR): Data Fault
2018-05-21T15:19:13.898Z,1526915953.898 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T15:19:14.131Z,1526915954.131 [NAL9602](INFO): Powering down
2018-05-21T15:19:14.997Z,1526915954.997 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T15:19:14.997Z,1526915954.997 [NAL9602] No Fault, FailCount= 4
2018-05-21T15:19:44.143Z,1526915984.143 [NAL9602](INFO): Powering up NAL9602
2018-05-21T15:19:55.344Z,1526915995.344 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:19:56.144Z,1526915996.144 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T15:19:56.144Z,1526915996.144 [NAL9602] Data Fault, FailCount= 5
2018-05-21T15:19:56.145Z,1526915996.145 [NAL9602](ERROR): Data Fault
2018-05-21T15:19:56.227Z,1526915996.227 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T15:19:56.227Z,1526915996.227 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T15:19:56.543Z,1526915996.543 [NAL9602](INFO): Powering down
2018-05-21T15:19:56.609Z,1526915996.609 [CBIT](INFO): Critical error at 20180521T151956
2018-05-21T15:20:22.599Z,1526916022.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:20:22.599Z,1526916022.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T15:20:22.600Z,1526916022.600 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:20:22.613Z,1526916022.613 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:20:23.056Z,1526916023.056 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:20:23.056Z,1526916023.056 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T15:20:23.391Z,1526916023.391 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:20:23.392Z,1526916023.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:20:23.392Z,1526916023.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:21:56.240Z,1526916116.240 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T15:21:56.241Z,1526916116.241 [NAL9602] No Fault, FailCount= 5
2018-05-21T15:21:56.591Z,1526916116.591 [NAL9602](INFO): Powering up NAL9602
2018-05-21T15:22:07.764Z,1526916127.764 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:23:23.620Z,1526916203.620 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:23:23.620Z,1526916203.620 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T15:23:23.620Z,1526916203.620 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:23:23.641Z,1526916203.641 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:23:24.040Z,1526916204.040 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:23:24.040Z,1526916204.040 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T15:23:24.427Z,1526916204.427 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:23:24.427Z,1526916204.427 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:23:24.427Z,1526916204.427 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:23:27.610Z,1526916207.610 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T15:18:27.4Z
2018-05-21T15:23:27.610Z,1526916207.610 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T15:23:27.610Z,1526916207.610 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T15:23:31.974Z,1526916211.974 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0273.lzma
2018-05-21T15:23:32.764Z,1526916212.764 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0273.lzma.bak
2018-05-21T15:23:32.766Z,1526916212.766 [DataOverHttps](INFO): SBD MOMSN=8288367
2018-05-21T15:23:41.893Z,1526916221.893 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0274.lzma
2018-05-21T15:23:42.692Z,1526916222.692 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0274.lzma.bak
2018-05-21T15:23:42.692Z,1526916222.692 [DataOverHttps](INFO): SBD MOMSN=8288370
2018-05-21T15:23:43.405Z,1526916223.405 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T15:23:43.405Z,1526916223.405 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T15:23:43.405Z,1526916223.405 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T15:23:46.601Z,1526916226.601 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T15:24:17.103Z,1526916257.103 [NAL9602](INFO): Powering down
2018-05-21T15:24:41.555Z,1526916281.555 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T15:26:24.803Z,1526916384.803 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:26:24.803Z,1526916384.803 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T15:26:24.803Z,1526916384.803 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:26:24.816Z,1526916384.816 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:26:25.213Z,1526916385.213 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:26:25.213Z,1526916385.213 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T15:26:25.601Z,1526916385.601 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:26:25.602Z,1526916385.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:26:25.602Z,1526916385.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:28:43.736Z,1526916523.736 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T15:28:43.736Z,1526916523.736 [Default:CheckIn:C.Wait] Stopped
2018-05-21T15:28:43.736Z,1526916523.736 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T15:28:43.736Z,1526916523.736 [Default:CheckIn:D] Running Loop=1
2018-05-21T15:28:44.148Z,1526916524.148 [Default:CheckIn:D] Stopped
2018-05-21T15:28:44.148Z,1526916524.148 [Default:CheckIn:E] Running Loop=1
2018-05-21T15:28:44.546Z,1526916524.546 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 947.185091 min 
2018-05-21T15:28:44.546Z,1526916524.546 [Default:CheckIn:E] Stopped
2018-05-21T15:28:44.546Z,1526916524.546 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T15:28:44.547Z,1526916524.547 [Default:CheckIn] Stopped
2018-05-21T15:28:44.547Z,1526916524.547 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T15:28:44.547Z,1526916524.547 [Default:CheckIn](INFO): Running loop #93
2018-05-21T15:28:44.547Z,1526916524.547 [Default:CheckIn] Running Loop=93
2018-05-21T15:28:44.547Z,1526916524.547 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T15:28:44.547Z,1526916524.547 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T15:28:48.060Z,1526916528.060 [NAL9602](INFO): Powering up
2018-05-21T15:28:58.948Z,1526916538.948 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:29:25.800Z,1526916565.800 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:29:25.800Z,1526916565.800 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T15:29:25.800Z,1526916565.800 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:29:25.813Z,1526916565.813 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:29:26.204Z,1526916566.204 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:29:26.204Z,1526916566.204 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T15:29:26.599Z,1526916566.599 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:29:26.600Z,1526916566.600 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:29:26.600Z,1526916566.600 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:29:30.948Z,1526916570.948 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T15:29:31.030Z,1526916571.030 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T15:29:31.030Z,1526916571.030 [NAL9602] Data Fault, FailCount= 1
2018-05-21T15:29:31.030Z,1526916571.030 [NAL9602](ERROR): Data Fault
2018-05-21T15:29:31.133Z,1526916571.133 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T15:29:31.347Z,1526916571.347 [NAL9602](INFO): Powering down
2018-05-21T15:29:32.207Z,1526916572.207 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T15:29:32.207Z,1526916572.207 [NAL9602] No Fault, FailCount= 1
2018-05-21T15:30:01.515Z,1526916601.515 [NAL9602](INFO): Powering up NAL9602
2018-05-21T15:30:12.316Z,1526916612.316 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:32:26.787Z,1526916746.787 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:32:26.787Z,1526916746.787 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T15:32:26.788Z,1526916746.788 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:32:26.800Z,1526916746.800 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:32:27.206Z,1526916747.206 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:32:27.206Z,1526916747.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T15:32:27.588Z,1526916747.588 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:32:27.589Z,1526916747.589 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:32:27.589Z,1526916747.589 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:33:44.869Z,1526916824.869 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T15:28:44.5Z
2018-05-21T15:33:44.869Z,1526916824.869 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T15:33:44.870Z,1526916824.870 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T15:33:48.779Z,1526916828.779 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0276.lzma
2018-05-21T15:33:49.580Z,1526916829.580 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0276.lzma.bak
2018-05-21T15:33:49.580Z,1526916829.580 [DataOverHttps](INFO): SBD MOMSN=8288376
2018-05-21T15:33:58.448Z,1526916838.448 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0277.lzma
2018-05-21T15:33:59.249Z,1526916839.249 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0277.lzma.bak
2018-05-21T15:33:59.249Z,1526916839.249 [DataOverHttps](INFO): SBD MOMSN=8288378
2018-05-21T15:34:00.051Z,1526916840.051 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T15:34:00.051Z,1526916840.051 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T15:34:00.051Z,1526916840.051 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T15:34:03.402Z,1526916843.402 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T15:34:33.907Z,1526916873.907 [NAL9602](INFO): Powering down
2018-05-21T15:34:41.561Z,1526916881.561 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T15:35:27.923Z,1526916927.923 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:35:27.923Z,1526916927.923 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T15:35:27.923Z,1526916927.923 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:35:27.948Z,1526916927.948 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:35:28.334Z,1526916928.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:35:28.334Z,1526916928.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T15:35:28.723Z,1526916928.723 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:35:28.724Z,1526916928.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:35:28.724Z,1526916928.724 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:38:28.815Z,1526917108.815 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:38:28.816Z,1526917108.816 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T15:38:28.816Z,1526917108.816 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:38:28.831Z,1526917108.831 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:38:29.232Z,1526917109.232 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:38:29.232Z,1526917109.232 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T15:38:29.614Z,1526917109.614 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:38:29.615Z,1526917109.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:38:29.615Z,1526917109.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:39:00.422Z,1526917140.422 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T15:39:00.422Z,1526917140.422 [Default:CheckIn:C.Wait] Stopped
2018-05-21T15:39:00.422Z,1526917140.422 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T15:39:00.423Z,1526917140.423 [Default:CheckIn:D] Running Loop=1
2018-05-21T15:39:00.813Z,1526917140.813 [Default:CheckIn:D] Stopped
2018-05-21T15:39:00.813Z,1526917140.813 [Default:CheckIn:E] Running Loop=1
2018-05-21T15:39:01.215Z,1526917141.215 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 957.462891 min 
2018-05-21T15:39:01.215Z,1526917141.215 [Default:CheckIn:E] Stopped
2018-05-21T15:39:01.215Z,1526917141.215 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T15:39:01.215Z,1526917141.215 [Default:CheckIn] Stopped
2018-05-21T15:39:01.216Z,1526917141.216 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T15:39:01.216Z,1526917141.216 [Default:CheckIn](INFO): Running loop #94
2018-05-21T15:39:01.216Z,1526917141.216 [Default:CheckIn] Running Loop=94
2018-05-21T15:39:01.216Z,1526917141.216 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T15:39:01.216Z,1526917141.216 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T15:39:04.689Z,1526917144.689 [NAL9602](INFO): Powering up
2018-05-21T15:39:15.580Z,1526917155.580 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:39:16.380Z,1526917156.380 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T15:39:16.380Z,1526917156.380 [NAL9602] Data Fault, FailCount= 2
2018-05-21T15:39:16.380Z,1526917156.380 [NAL9602](ERROR): Data Fault
2018-05-21T15:39:16.468Z,1526917156.468 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T15:39:16.779Z,1526917156.779 [NAL9602](INFO): Powering down
2018-05-21T15:39:17.641Z,1526917157.641 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T15:39:17.641Z,1526917157.641 [NAL9602] No Fault, FailCount= 2
2018-05-21T15:39:47.179Z,1526917187.179 [NAL9602](INFO): Powering up NAL9602
2018-05-21T15:39:58.380Z,1526917198.380 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:41:29.739Z,1526917289.739 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:41:29.739Z,1526917289.739 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T15:41:29.739Z,1526917289.739 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:41:29.796Z,1526917289.796 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:41:30.144Z,1526917290.144 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:41:30.144Z,1526917290.144 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T15:41:30.538Z,1526917290.538 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:41:30.539Z,1526917290.539 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:41:30.539Z,1526917290.539 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:44:01.540Z,1526917441.540 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T15:39:01.2Z
2018-05-21T15:44:01.540Z,1526917441.540 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T15:44:01.540Z,1526917441.540 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T15:44:05.492Z,1526917445.492 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0279.lzma
2018-05-21T15:44:06.272Z,1526917446.272 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0279.lzma.bak
2018-05-21T15:44:06.272Z,1526917446.272 [DataOverHttps](INFO): SBD MOMSN=8288383
2018-05-21T15:44:15.131Z,1526917455.131 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0280.lzma
2018-05-21T15:44:15.932Z,1526917455.932 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0280.lzma.bak
2018-05-21T15:44:15.932Z,1526917455.932 [DataOverHttps](INFO): SBD MOMSN=8288385
2018-05-21T15:44:16.638Z,1526917456.638 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T15:44:16.638Z,1526917456.638 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T15:44:16.638Z,1526917456.638 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T15:44:30.816Z,1526917470.816 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:44:30.816Z,1526917470.816 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T15:44:30.816Z,1526917470.816 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:44:30.829Z,1526917470.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:44:31.226Z,1526917471.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:44:31.226Z,1526917471.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T15:44:31.617Z,1526917471.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:44:31.617Z,1526917471.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:44:31.618Z,1526917471.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:44:41.649Z,1526917481.649 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T15:45:04.763Z,1526917504.763 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T15:45:35.207Z,1526917535.207 [NAL9602](INFO): Powering down
2018-05-21T15:47:32.006Z,1526917652.006 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:47:32.006Z,1526917652.006 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T15:47:32.006Z,1526917652.006 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:47:32.019Z,1526917652.019 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:47:32.416Z,1526917652.416 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:47:32.416Z,1526917652.416 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T15:47:32.813Z,1526917652.813 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:47:32.813Z,1526917652.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:47:32.814Z,1526917652.814 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:49:16.912Z,1526917756.912 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T15:49:16.912Z,1526917756.912 [Default:CheckIn:C.Wait] Stopped
2018-05-21T15:49:16.912Z,1526917756.912 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T15:49:16.912Z,1526917756.912 [Default:CheckIn:D] Running Loop=1
2018-05-21T15:49:17.310Z,1526917757.310 [Default:CheckIn:D] Stopped
2018-05-21T15:49:17.310Z,1526917757.310 [Default:CheckIn:E] Running Loop=1
2018-05-21T15:49:17.716Z,1526917757.716 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 967.737826 min 
2018-05-21T15:49:17.716Z,1526917757.716 [Default:CheckIn:E] Stopped
2018-05-21T15:49:17.716Z,1526917757.716 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T15:49:17.716Z,1526917757.716 [Default:CheckIn] Stopped
2018-05-21T15:49:17.717Z,1526917757.717 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T15:49:17.717Z,1526917757.717 [Default:CheckIn](INFO): Running loop #95
2018-05-21T15:49:17.717Z,1526917757.717 [Default:CheckIn] Running Loop=95
2018-05-21T15:49:17.717Z,1526917757.717 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T15:49:17.717Z,1526917757.717 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T15:49:21.363Z,1526917761.363 [NAL9602](INFO): Powering up
2018-05-21T15:49:32.236Z,1526917772.236 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:50:04.232Z,1526917804.232 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T15:50:04.306Z,1526917804.306 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T15:50:04.306Z,1526917804.306 [NAL9602] Data Fault, FailCount= 3
2018-05-21T15:50:04.306Z,1526917804.306 [NAL9602](ERROR): Data Fault
2018-05-21T15:50:04.381Z,1526917804.381 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T15:50:04.631Z,1526917804.631 [NAL9602](INFO): Powering down
2018-05-21T15:50:05.493Z,1526917805.493 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T15:50:05.493Z,1526917805.493 [NAL9602] No Fault, FailCount= 3
2018-05-21T15:50:33.051Z,1526917833.051 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:50:33.051Z,1526917833.051 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T15:50:33.051Z,1526917833.051 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:50:33.064Z,1526917833.064 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:50:33.487Z,1526917833.487 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:50:33.487Z,1526917833.487 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T15:50:33.856Z,1526917833.856 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:50:33.857Z,1526917833.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:50:33.857Z,1526917833.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:50:35.004Z,1526917835.004 [NAL9602](INFO): Powering up NAL9602
2018-05-21T15:50:46.204Z,1526917846.204 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:50:47.004Z,1526917847.004 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T15:50:47.004Z,1526917847.004 [NAL9602] Data Fault, FailCount= 4
2018-05-21T15:50:47.004Z,1526917847.004 [NAL9602](ERROR): Data Fault
2018-05-21T15:50:47.087Z,1526917847.087 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T15:50:47.407Z,1526917847.407 [NAL9602](INFO): Powering down
2018-05-21T15:50:48.275Z,1526917848.275 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T15:50:48.275Z,1526917848.275 [NAL9602] No Fault, FailCount= 4
2018-05-21T15:51:17.804Z,1526917877.804 [NAL9602](INFO): Powering up NAL9602
2018-05-21T15:51:28.980Z,1526917888.980 [NAL9602](INFO): NAL9602 initialized
2018-05-21T15:53:33.978Z,1526918013.978 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:53:33.979Z,1526918013.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T15:53:33.979Z,1526918013.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:53:34.003Z,1526918014.003 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:53:34.409Z,1526918014.409 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T15:53:34.409Z,1526918014.409 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T15:53:34.784Z,1526918014.784 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T15:53:34.784Z,1526918014.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T15:53:34.785Z,1526918014.785 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T15:54:18.027Z,1526918058.027 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T15:49:17.7Z
2018-05-21T15:54:18.027Z,1526918058.027 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T15:54:18.027Z,1526918058.027 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T15:54:22.432Z,1526918062.432 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0282.lzma
2018-05-21T15:54:23.212Z,1526918063.212 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0282.lzma.bak
2018-05-21T15:54:23.212Z,1526918063.212 [DataOverHttps](INFO): SBD MOMSN=8288390
2018-05-21T15:54:32.138Z,1526918072.138 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0283.lzma
2018-05-21T15:54:32.941Z,1526918072.941 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0283.lzma.bak
2018-05-21T15:54:32.951Z,1526918072.951 [DataOverHttps](INFO): SBD MOMSN=8288392
2018-05-21T15:54:33.667Z,1526918073.667 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T15:54:33.667Z,1526918073.667 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T15:54:33.667Z,1526918073.667 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T15:54:36.863Z,1526918076.863 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T15:54:41.813Z,1526918081.813 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T15:55:07.359Z,1526918107.359 [NAL9602](INFO): Powering down
2018-05-21T15:56:37.512Z,1526918197.512 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T15:56:37.512Z,1526918197.512 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T15:56:37.512Z,1526918197.512 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T15:56:37.565Z,1526918197.565 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:56:37.565Z,1526918197.565 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T15:59:34.079Z,1526918374.079 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T15:59:34.079Z,1526918374.079 [Default:CheckIn:C.Wait] Stopped
2018-05-21T15:59:34.080Z,1526918374.080 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T15:59:34.080Z,1526918374.080 [Default:CheckIn:D] Running Loop=1
2018-05-21T15:59:34.480Z,1526918374.480 [Default:CheckIn:D] Stopped
2018-05-21T15:59:34.480Z,1526918374.480 [Default:CheckIn:E] Running Loop=1
2018-05-21T15:59:34.889Z,1526918374.889 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 978.023958 min 
2018-05-21T15:59:34.889Z,1526918374.889 [Default:CheckIn:E] Stopped
2018-05-21T15:59:34.889Z,1526918374.889 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T15:59:34.889Z,1526918374.889 [Default:CheckIn] Stopped
2018-05-21T15:59:34.889Z,1526918374.889 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T15:59:34.889Z,1526918374.889 [Default:CheckIn](INFO): Running loop #96
2018-05-21T15:59:34.889Z,1526918374.889 [Default:CheckIn] Running Loop=96
2018-05-21T15:59:34.890Z,1526918374.890 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T15:59:34.890Z,1526918374.890 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T15:59:38.268Z,1526918378.268 [NAL9602](INFO): Powering up
2018-05-21T15:59:49.456Z,1526918389.456 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:00:21.456Z,1526918421.456 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T16:00:21.538Z,1526918421.538 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T16:00:21.538Z,1526918421.538 [NAL9602] Data Fault, FailCount= 5
2018-05-21T16:00:21.538Z,1526918421.538 [NAL9602](ERROR): Data Fault
2018-05-21T16:00:21.632Z,1526918421.632 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T16:00:21.633Z,1526918421.633 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T16:00:21.855Z,1526918421.855 [NAL9602](INFO): Powering down
2018-05-21T16:00:21.926Z,1526918421.926 [CBIT](INFO): Critical error at 20180521T160021
2018-05-21T16:02:21.872Z,1526918541.872 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T16:02:21.872Z,1526918541.872 [NAL9602] No Fault, FailCount= 5
2018-05-21T16:02:22.228Z,1526918542.228 [NAL9602](INFO): Powering up NAL9602
2018-05-21T16:02:33.428Z,1526918553.428 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:02:34.220Z,1526918554.220 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T16:02:34.220Z,1526918554.220 [NAL9602] Data Fault, FailCount= 1
2018-05-21T16:02:34.220Z,1526918554.220 [NAL9602](ERROR): Data Fault
2018-05-21T16:02:34.288Z,1526918554.288 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T16:02:34.619Z,1526918554.619 [NAL9602](INFO): Powering down
2018-05-21T16:02:35.487Z,1526918555.487 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T16:02:35.487Z,1526918555.487 [NAL9602] No Fault, FailCount= 1
2018-05-21T16:03:04.672Z,1526918584.672 [NAL9602](INFO): Powering up NAL9602
2018-05-21T16:03:15.868Z,1526918595.868 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:04:35.133Z,1526918675.133 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T15:59:34.9Z
2018-05-21T16:04:35.133Z,1526918675.133 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T16:04:35.133Z,1526918675.133 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T16:04:39.141Z,1526918679.141 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0285.lzma
2018-05-21T16:04:39.940Z,1526918679.940 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0285.lzma.bak
2018-05-21T16:04:39.940Z,1526918679.940 [DataOverHttps](INFO): SBD MOMSN=8288398
2018-05-21T16:04:43.988Z,1526918683.988 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T16:04:49.124Z,1526918689.124 [DataOverHttps](INFO): Sending 313 bytes from file Logs/20180520T234132/Express0286.lzma
2018-05-21T16:04:49.925Z,1526918689.925 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0286.lzma.bak
2018-05-21T16:04:49.925Z,1526918689.925 [DataOverHttps](INFO): SBD MOMSN=8288401
2018-05-21T16:04:50.632Z,1526918690.632 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T16:04:50.632Z,1526918690.632 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T16:04:50.632Z,1526918690.632 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T16:04:53.838Z,1526918693.838 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T16:05:24.347Z,1526918724.347 [NAL9602](INFO): Powering down
2018-05-21T16:06:33.176Z,1526918793.176 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T16:06:33.176Z,1526918793.176 [BPC1] Communications Fault, FailCount= 1
2018-05-21T16:06:33.176Z,1526918793.176 [BPC1](ERROR): Communications Fault
2018-05-21T16:06:33.200Z,1526918793.200 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T16:06:34.415Z,1526918794.415 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T16:06:34.415Z,1526918794.415 [BPC1] No Fault, FailCount= 1
2018-05-21T16:09:51.144Z,1526918991.144 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T16:09:51.145Z,1526918991.145 [Default:CheckIn:C.Wait] Stopped
2018-05-21T16:09:51.145Z,1526918991.145 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T16:09:51.145Z,1526918991.145 [Default:CheckIn:D] Running Loop=1
2018-05-21T16:09:51.516Z,1526918991.516 [Default:CheckIn:D] Stopped
2018-05-21T16:09:51.516Z,1526918991.516 [Default:CheckIn:E] Running Loop=1
2018-05-21T16:09:51.916Z,1526918991.916 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 988.307943 min 
2018-05-21T16:09:51.916Z,1526918991.916 [Default:CheckIn:E] Stopped
2018-05-21T16:09:51.916Z,1526918991.916 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T16:09:51.916Z,1526918991.916 [Default:CheckIn] Stopped
2018-05-21T16:09:51.916Z,1526918991.916 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T16:09:51.917Z,1526918991.917 [Default:CheckIn](INFO): Running loop #97
2018-05-21T16:09:51.917Z,1526918991.917 [Default:CheckIn] Running Loop=97
2018-05-21T16:09:51.917Z,1526918991.917 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T16:09:51.917Z,1526918991.917 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T16:09:55.399Z,1526918995.399 [NAL9602](INFO): Powering up
2018-05-21T16:10:06.320Z,1526919006.320 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:10:38.320Z,1526919038.320 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T16:10:38.402Z,1526919038.402 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T16:10:38.402Z,1526919038.402 [NAL9602] Data Fault, FailCount= 2
2018-05-21T16:10:38.403Z,1526919038.403 [NAL9602](ERROR): Data Fault
2018-05-21T16:10:38.469Z,1526919038.469 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T16:10:38.719Z,1526919038.719 [NAL9602](INFO): Powering down
2018-05-21T16:10:39.585Z,1526919039.585 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T16:10:39.585Z,1526919039.585 [NAL9602] No Fault, FailCount= 2
2018-05-21T16:11:08.827Z,1526919068.827 [NAL9602](INFO): Powering up NAL9602
2018-05-21T16:11:20.027Z,1526919080.027 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:11:37.711Z,1526919097.711 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:11:37.711Z,1526919097.711 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T16:11:38.067Z,1526919098.067 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:11:38.068Z,1526919098.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:11:38.068Z,1526919098.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:14:38.272Z,1526919278.272 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:14:38.272Z,1526919278.272 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T16:14:38.272Z,1526919278.272 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:14:38.285Z,1526919278.285 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:14:38.690Z,1526919278.690 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:14:38.690Z,1526919278.690 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T16:14:39.067Z,1526919279.067 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:14:39.067Z,1526919279.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:14:39.067Z,1526919279.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:14:44.288Z,1526919284.288 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T16:14:52.272Z,1526919292.272 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T16:09:51.9Z
2018-05-21T16:14:52.272Z,1526919292.272 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T16:14:52.272Z,1526919292.272 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T16:14:56.299Z,1526919296.299 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0288.lzma
2018-05-21T16:14:57.092Z,1526919297.092 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0288.lzma.bak
2018-05-21T16:14:57.092Z,1526919297.092 [DataOverHttps](INFO): SBD MOMSN=8288408
2018-05-21T16:15:05.906Z,1526919305.906 [DataOverHttps](INFO): Sending 238 bytes from file Logs/20180520T234132/Express0289.lzma
2018-05-21T16:15:06.708Z,1526919306.708 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0289.lzma.bak
2018-05-21T16:15:06.708Z,1526919306.708 [DataOverHttps](INFO): SBD MOMSN=8288410
2018-05-21T16:15:07.425Z,1526919307.425 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T16:15:07.425Z,1526919307.425 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T16:15:07.425Z,1526919307.425 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T16:15:13.281Z,1526919313.281 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T16:15:20.673Z,1526919320.673 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T16:15:20.674Z,1526919320.674 [BPC1] Communications Fault, FailCount= 2
2018-05-21T16:15:20.674Z,1526919320.674 [BPC1](ERROR): Communications Fault
2018-05-21T16:15:20.805Z,1526919320.805 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T16:15:21.948Z,1526919321.948 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T16:15:21.948Z,1526919321.948 [BPC1] No Fault, FailCount= 2
2018-05-21T16:15:43.856Z,1526919343.856 [NAL9602](INFO): Powering down
2018-05-21T16:17:39.115Z,1526919459.115 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:17:39.115Z,1526919459.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T16:17:39.116Z,1526919459.116 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:17:39.128Z,1526919459.128 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:17:39.527Z,1526919459.527 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:17:39.527Z,1526919459.527 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T16:17:39.916Z,1526919459.916 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:17:39.917Z,1526919459.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:17:39.917Z,1526919459.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:20:07.743Z,1526919607.743 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T16:20:07.743Z,1526919607.743 [Default:CheckIn:C.Wait] Stopped
2018-05-21T16:20:07.743Z,1526919607.743 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T16:20:07.743Z,1526919607.743 [Default:CheckIn:D] Running Loop=1
2018-05-21T16:20:08.142Z,1526919608.142 [Default:CheckIn:D] Stopped
2018-05-21T16:20:08.142Z,1526919608.142 [Default:CheckIn:E] Running Loop=1
2018-05-21T16:20:13.716Z,1526919613.716 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 998.585026 min 
2018-05-21T16:20:13.717Z,1526919613.717 [Default:CheckIn:E] Stopped
2018-05-21T16:20:13.717Z,1526919613.717 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T16:20:13.717Z,1526919613.717 [Default:CheckIn] Stopped
2018-05-21T16:20:13.717Z,1526919613.717 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T16:20:13.717Z,1526919613.717 [Default:CheckIn](INFO): Running loop #98
2018-05-21T16:20:13.717Z,1526919613.717 [Default:CheckIn] Running Loop=98
2018-05-21T16:20:13.717Z,1526919613.717 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T16:20:13.717Z,1526919613.717 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T16:20:14.167Z,1526919614.167 [NAL9602](INFO): Powering up
2018-05-21T16:20:25.376Z,1526919625.376 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:20:26.168Z,1526919626.168 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T16:20:26.168Z,1526919626.168 [NAL9602] Data Fault, FailCount= 3
2018-05-21T16:20:26.168Z,1526919626.168 [NAL9602](ERROR): Data Fault
2018-05-21T16:20:26.279Z,1526919626.279 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T16:20:26.567Z,1526919626.567 [NAL9602](INFO): Powering down
2018-05-21T16:20:27.456Z,1526919627.456 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T16:20:27.456Z,1526919627.456 [NAL9602] No Fault, FailCount= 3
2018-05-21T16:20:40.210Z,1526919640.210 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:20:40.210Z,1526919640.210 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T16:20:40.210Z,1526919640.210 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:20:40.235Z,1526919640.235 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:20:40.622Z,1526919640.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:20:40.633Z,1526919640.633 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T16:20:41.008Z,1526919641.008 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:20:41.009Z,1526919641.009 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:20:41.009Z,1526919641.009 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:20:56.967Z,1526919656.967 [NAL9602](INFO): Powering up NAL9602
2018-05-21T16:21:07.768Z,1526919667.768 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:23:41.240Z,1526919821.240 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:23:41.240Z,1526919821.240 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T16:23:41.240Z,1526919821.240 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:23:41.253Z,1526919821.253 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:23:41.659Z,1526919821.659 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:23:41.659Z,1526919821.659 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T16:23:42.039Z,1526919822.039 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:23:42.039Z,1526919822.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:23:42.039Z,1526919822.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:24:44.434Z,1526919884.434 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T16:25:15.720Z,1526919915.720 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T16:20:13.7Z
2018-05-21T16:25:15.720Z,1526919915.720 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T16:25:15.720Z,1526919915.720 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T16:25:27.435Z,1526919927.435 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0291.lzma
2018-05-21T16:25:28.209Z,1526919928.209 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0291.lzma.bak
2018-05-21T16:25:28.209Z,1526919928.209 [DataOverHttps](INFO): SBD MOMSN=8288415
2018-05-21T16:25:37.379Z,1526919937.379 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180520T234132/Express0292.lzma
2018-05-21T16:25:38.180Z,1526919938.180 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0292.lzma.bak
2018-05-21T16:25:38.180Z,1526919938.180 [DataOverHttps](INFO): SBD MOMSN=8288417
2018-05-21T16:25:38.918Z,1526919938.918 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T16:25:38.918Z,1526919938.918 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T16:25:38.918Z,1526919938.918 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T16:26:04.270Z,1526919964.270 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T16:26:04.270Z,1526919964.270 [BPC1] Communications Fault, FailCount= 3
2018-05-21T16:26:04.270Z,1526919964.270 [BPC1](ERROR): Communications Fault
2018-05-21T16:26:04.298Z,1526919964.298 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T16:26:05.510Z,1526919965.510 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T16:26:05.510Z,1526919965.510 [BPC1] No Fault, FailCount= 3
2018-05-21T16:26:13.851Z,1526919973.851 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T16:26:42.863Z,1526920002.863 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:26:42.863Z,1526920002.863 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T16:26:42.864Z,1526920002.864 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:26:42.885Z,1526920002.885 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:26:43.007Z,1526920003.007 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:26:43.007Z,1526920003.007 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T16:26:43.355Z,1526920003.355 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:26:43.356Z,1526920003.356 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:26:43.356Z,1526920003.356 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:26:44.503Z,1526920004.503 [NAL9602](INFO): Powering down
2018-05-21T16:27:18.536Z,1526920038.536 [BPC1](ERROR): Failed to parse message.
2018-05-21T16:27:18.536Z,1526920038.536 [BPC1](ERROR): Failed to parse Bank A battery data
2018-05-21T16:29:43.677Z,1526920183.677 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:29:43.677Z,1526920183.677 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T16:29:43.677Z,1526920183.677 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:29:43.718Z,1526920183.718 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:29:44.135Z,1526920184.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:29:44.135Z,1526920184.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T16:29:44.473Z,1526920184.473 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:29:44.473Z,1526920184.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:29:44.473Z,1526920184.473 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:30:39.286Z,1526920239.286 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T16:30:39.288Z,1526920239.288 [Default:CheckIn:C.Wait] Stopped
2018-05-21T16:30:39.288Z,1526920239.288 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T16:30:39.288Z,1526920239.288 [Default:CheckIn:D] Running Loop=1
2018-05-21T16:30:39.689Z,1526920239.689 [Default:CheckIn:D] Stopped
2018-05-21T16:30:39.689Z,1526920239.689 [Default:CheckIn:E] Running Loop=1
2018-05-21T16:30:40.093Z,1526920240.093 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1009.110807 min 
2018-05-21T16:30:40.093Z,1526920240.093 [Default:CheckIn:E] Stopped
2018-05-21T16:30:40.094Z,1526920240.094 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T16:30:40.094Z,1526920240.094 [Default:CheckIn] Stopped
2018-05-21T16:30:40.094Z,1526920240.094 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T16:30:40.094Z,1526920240.094 [Default:CheckIn](INFO): Running loop #99
2018-05-21T16:30:40.094Z,1526920240.094 [Default:CheckIn] Running Loop=99
2018-05-21T16:30:40.094Z,1526920240.094 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T16:30:40.094Z,1526920240.094 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T16:30:43.279Z,1526920243.279 [NAL9602](INFO): Powering up
2018-05-21T16:30:54.456Z,1526920254.456 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:31:26.456Z,1526920286.456 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T16:31:26.538Z,1526920286.538 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T16:31:26.538Z,1526920286.538 [NAL9602] Data Fault, FailCount= 4
2018-05-21T16:31:26.538Z,1526920286.538 [NAL9602](ERROR): Data Fault
2018-05-21T16:31:26.623Z,1526920286.623 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T16:31:26.855Z,1526920286.855 [NAL9602](INFO): Powering down
2018-05-21T16:31:27.710Z,1526920287.710 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T16:31:27.711Z,1526920287.711 [NAL9602] No Fault, FailCount= 4
2018-05-21T16:31:56.919Z,1526920316.919 [NAL9602](INFO): Powering up NAL9602
2018-05-21T16:32:08.119Z,1526920328.119 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:32:08.920Z,1526920328.920 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T16:32:08.920Z,1526920328.920 [NAL9602] Data Fault, FailCount= 5
2018-05-21T16:32:08.920Z,1526920328.920 [NAL9602](ERROR): Data Fault
2018-05-21T16:32:09.036Z,1526920329.036 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T16:32:09.036Z,1526920329.036 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T16:32:09.319Z,1526920329.319 [NAL9602](INFO): Powering down
2018-05-21T16:32:09.378Z,1526920329.378 [CBIT](INFO): Critical error at 20180521T163209
2018-05-21T16:32:44.722Z,1526920364.722 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:32:44.722Z,1526920364.722 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T16:32:44.723Z,1526920364.723 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:32:44.744Z,1526920364.744 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:32:45.134Z,1526920365.134 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:32:45.134Z,1526920365.134 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T16:32:45.519Z,1526920365.519 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:32:45.519Z,1526920365.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:32:45.520Z,1526920365.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:34:09.132Z,1526920449.132 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T16:34:09.132Z,1526920449.132 [NAL9602] No Fault, FailCount= 5
2018-05-21T16:34:09.452Z,1526920449.452 [NAL9602](INFO): Powering up NAL9602
2018-05-21T16:34:20.652Z,1526920460.652 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:34:44.710Z,1526920484.710 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T16:34:51.866Z,1526920491.866 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T16:34:51.867Z,1526920491.867 [BPC1] Communications Fault, FailCount= 4
2018-05-21T16:34:51.867Z,1526920491.867 [BPC1](ERROR): Communications Fault
2018-05-21T16:34:51.929Z,1526920491.929 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T16:34:53.098Z,1526920493.098 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T16:34:53.099Z,1526920493.099 [BPC1] No Fault, FailCount= 4
2018-05-21T16:35:21.106Z,1526920521.106 [CBIT](IMPORTANT): Beginning ground fault scan
2018-05-21T16:35:31.887Z,1526920531.887 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134041
CHAN A1 (24V): -0.004138
CHAN A2 (12V): -0.002341
CHAN A3 (5V): -0.001748
CHAN B0 (3.3V): 0.000285
CHAN B1 (3.15aV): -0.000090
CHAN B2 (3.15bV): -0.000319
CHAN B3 (GND): -0.000272
OPEN: -0.000382
Full Scale Calc: 4.765 mA, -1.589 mA
2018-05-21T16:35:40.288Z,1526920540.288 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T16:30:40.1Z
2018-05-21T16:35:40.288Z,1526920540.288 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T16:35:40.288Z,1526920540.288 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T16:35:44.417Z,1526920544.417 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0294.lzma
2018-05-21T16:35:45.209Z,1526920545.209 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0294.lzma.bak
2018-05-21T16:35:45.209Z,1526920545.209 [DataOverHttps](INFO): SBD MOMSN=8288422
2018-05-21T16:35:45.921Z,1526920545.921 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:35:45.921Z,1526920545.921 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T16:35:45.921Z,1526920545.921 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:35:45.959Z,1526920545.959 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:35:46.108Z,1526920546.108 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:35:46.108Z,1526920546.108 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T16:35:49.165Z,1526920549.165 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:35:49.166Z,1526920549.166 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:35:49.166Z,1526920549.166 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:35:58.832Z,1526920558.832 [DataOverHttps](INFO): Sending 434 bytes from file Logs/20180520T234132/Express0295.lzma
2018-05-21T16:35:59.632Z,1526920559.632 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0295.lzma.bak
2018-05-21T16:35:59.632Z,1526920559.632 [DataOverHttps](INFO): SBD MOMSN=8288425
2018-05-21T16:36:00.360Z,1526920560.360 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T16:36:00.360Z,1526920560.360 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T16:36:00.360Z,1526920560.360 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T16:36:08.833Z,1526920568.833 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T16:36:08.833Z,1526920568.833 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T16:36:09.236Z,1526920569.236 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T16:36:40.032Z,1526920600.032 [NAL9602](INFO): Powering down
2018-05-21T16:38:49.313Z,1526920729.313 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:38:49.313Z,1526920729.313 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T16:38:49.313Z,1526920729.313 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:38:49.326Z,1526920729.326 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:38:49.746Z,1526920729.746 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:38:49.746Z,1526920729.746 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T16:38:50.118Z,1526920730.118 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:38:50.118Z,1526920730.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:38:50.119Z,1526920730.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:41:00.534Z,1526920860.534 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T16:41:00.534Z,1526920860.534 [Default:CheckIn:C.Wait] Stopped
2018-05-21T16:41:00.534Z,1526920860.534 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T16:41:00.534Z,1526920860.534 [Default:CheckIn:D] Running Loop=1
2018-05-21T16:41:00.929Z,1526920860.929 [Default:CheckIn:D] Stopped
2018-05-21T16:41:00.929Z,1526920860.929 [Default:CheckIn:E] Running Loop=1
2018-05-21T16:41:01.329Z,1526920861.329 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1019.464779 min 
2018-05-21T16:41:01.329Z,1526920861.329 [Default:CheckIn:E] Stopped
2018-05-21T16:41:01.329Z,1526920861.329 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T16:41:01.329Z,1526920861.329 [Default:CheckIn] Stopped
2018-05-21T16:41:01.329Z,1526920861.329 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T16:41:01.330Z,1526920861.330 [Default:CheckIn](INFO): Running loop #100
2018-05-21T16:41:01.330Z,1526920861.330 [Default:CheckIn] Running Loop=100
2018-05-21T16:41:01.330Z,1526920861.330 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T16:41:01.331Z,1526920861.331 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T16:41:04.792Z,1526920864.792 [NAL9602](INFO): Powering up
2018-05-21T16:41:15.696Z,1526920875.696 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:41:50.153Z,1526920910.153 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:41:50.153Z,1526920910.153 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T16:41:50.153Z,1526920910.153 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:41:50.166Z,1526920910.166 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:41:50.583Z,1526920910.583 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:41:50.583Z,1526920910.583 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T16:41:50.949Z,1526920910.949 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:41:50.950Z,1526920910.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:41:50.950Z,1526920910.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:42:17.397Z,1526920937.397 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T16:42:17.397Z,1526920937.397 [BPC1] Communications Fault, FailCount= 5
2018-05-21T16:42:17.397Z,1526920937.397 [BPC1](ERROR): Communications Fault
2018-05-21T16:42:17.421Z,1526920937.421 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T16:42:18.619Z,1526920938.619 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T16:42:18.620Z,1526920938.620 [BPC1] No Fault, FailCount= 5
2018-05-21T16:44:44.794Z,1526921084.794 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T16:44:51.184Z,1526921091.184 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:44:51.184Z,1526921091.184 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T16:44:51.184Z,1526921091.184 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:44:51.214Z,1526921091.214 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:44:51.537Z,1526921091.537 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T16:44:51.537Z,1526921091.537 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T16:44:51.613Z,1526921091.613 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:44:51.613Z,1526921091.613 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T16:44:51.986Z,1526921091.986 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:44:51.987Z,1526921091.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:44:51.987Z,1526921091.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:45:23.113Z,1526921123.113 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T16:45:23.113Z,1526921123.113 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T16:46:01.582Z,1526921161.582 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T16:41:01.3Z
2018-05-21T16:46:01.583Z,1526921161.583 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T16:46:01.583Z,1526921161.583 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T16:46:05.583Z,1526921165.583 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0297.lzma
2018-05-21T16:46:06.376Z,1526921166.376 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0297.lzma.bak
2018-05-21T16:46:06.376Z,1526921166.376 [DataOverHttps](INFO): SBD MOMSN=8288433
2018-05-21T16:46:20.256Z,1526921180.256 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T16:46:20.327Z,1526921180.327 [DataOverHttps](INFO): Sending 199 bytes from file Logs/20180520T234132/Express0298.lzma
2018-05-21T16:46:21.128Z,1526921181.128 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0298.lzma.bak
2018-05-21T16:46:21.128Z,1526921181.128 [DataOverHttps](INFO): SBD MOMSN=8288435
2018-05-21T16:46:21.856Z,1526921181.856 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T16:46:21.857Z,1526921181.857 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T16:46:21.857Z,1526921181.857 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T16:46:50.735Z,1526921210.735 [NAL9602](INFO): Powering down
2018-05-21T16:47:52.082Z,1526921272.082 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:47:52.082Z,1526921272.082 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T16:47:52.087Z,1526921272.087 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:47:52.119Z,1526921272.119 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:47:52.524Z,1526921272.524 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:47:52.524Z,1526921272.524 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T16:47:52.877Z,1526921272.877 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:47:52.878Z,1526921272.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:47:52.878Z,1526921272.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:49:57.836Z,1526921397.836 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T16:49:57.837Z,1526921397.837 [BPC1] Communications Fault, FailCount= 6
2018-05-21T16:49:57.837Z,1526921397.837 [BPC1](ERROR): Communications Fault
2018-05-21T16:49:57.881Z,1526921397.881 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T16:49:59.067Z,1526921399.067 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T16:49:59.067Z,1526921399.067 [BPC1] No Fault, FailCount= 6
2018-05-21T16:50:53.027Z,1526921453.027 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:50:53.027Z,1526921453.027 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T16:50:53.027Z,1526921453.027 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:50:53.039Z,1526921453.039 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:50:53.445Z,1526921453.445 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:50:53.445Z,1526921453.445 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T16:50:53.830Z,1526921453.830 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:50:53.831Z,1526921453.831 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:50:53.831Z,1526921453.831 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:51:12.216Z,1526921472.216 [BPC1](ERROR): Failed to parse Bank A battery data
2018-05-21T16:51:22.240Z,1526921482.240 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T16:51:22.240Z,1526921482.240 [Default:CheckIn:C.Wait] Stopped
2018-05-21T16:51:22.240Z,1526921482.240 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T16:51:22.240Z,1526921482.240 [Default:CheckIn:D] Running Loop=1
2018-05-21T16:51:22.635Z,1526921482.635 [Default:CheckIn:D] Stopped
2018-05-21T16:51:22.635Z,1526921482.635 [Default:CheckIn:E] Running Loop=1
2018-05-21T16:51:23.038Z,1526921483.038 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1029.826562 min 
2018-05-21T16:51:23.039Z,1526921483.039 [Default:CheckIn:E] Stopped
2018-05-21T16:51:23.039Z,1526921483.039 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T16:51:23.039Z,1526921483.039 [Default:CheckIn] Stopped
2018-05-21T16:51:23.039Z,1526921483.039 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T16:51:23.039Z,1526921483.039 [Default:CheckIn](INFO): Running loop #101
2018-05-21T16:51:23.039Z,1526921483.039 [Default:CheckIn] Running Loop=101
2018-05-21T16:51:23.040Z,1526921483.040 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T16:51:23.040Z,1526921483.040 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T16:51:26.335Z,1526921486.335 [NAL9602](INFO): Powering up
2018-05-21T16:51:37.480Z,1526921497.480 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:51:38.276Z,1526921498.276 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T16:51:38.276Z,1526921498.276 [NAL9602] Data Fault, FailCount= 1
2018-05-21T16:51:38.276Z,1526921498.276 [NAL9602](ERROR): Data Fault
2018-05-21T16:51:38.356Z,1526921498.356 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T16:51:38.675Z,1526921498.675 [NAL9602](INFO): Powering down
2018-05-21T16:51:39.556Z,1526921499.556 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T16:51:39.556Z,1526921499.556 [NAL9602] No Fault, FailCount= 1
2018-05-21T16:52:09.075Z,1526921529.075 [NAL9602](INFO): Powering up NAL9602
2018-05-21T16:52:20.275Z,1526921540.276 [NAL9602](INFO): NAL9602 initialized
2018-05-21T16:53:54.146Z,1526921634.146 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:53:54.146Z,1526921634.146 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T16:53:54.147Z,1526921634.147 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:53:54.159Z,1526921634.159 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:53:54.569Z,1526921634.569 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:53:54.569Z,1526921634.569 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T16:53:54.962Z,1526921634.962 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:53:54.962Z,1526921634.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:53:54.963Z,1526921634.963 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:54:45.023Z,1526921685.023 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T16:54:53.365Z,1526921693.365 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T16:54:53.365Z,1526921693.365 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T16:55:19.769Z,1526921719.769 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T16:55:19.769Z,1526921719.769 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T16:55:58.382Z,1526921758.382 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T16:55:58.382Z,1526921758.382 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T16:56:23.251Z,1526921783.251 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T16:51:23.0Z
2018-05-21T16:56:23.251Z,1526921783.251 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T16:56:23.251Z,1526921783.251 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T16:56:26.882Z,1526921786.882 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0300.lzma
2018-05-21T16:56:27.684Z,1526921787.684 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0300.lzma.bak
2018-05-21T16:56:27.684Z,1526921787.684 [DataOverHttps](INFO): SBD MOMSN=8288439
2018-05-21T16:56:41.670Z,1526921801.670 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0301.lzma
2018-05-21T16:56:42.468Z,1526921802.468 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0301.lzma.bak
2018-05-21T16:56:42.468Z,1526921802.468 [DataOverHttps](INFO): SBD MOMSN=8288441
2018-05-21T16:56:43.204Z,1526921803.204 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T16:56:43.204Z,1526921803.204 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T16:56:43.204Z,1526921803.204 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T16:56:55.094Z,1526921815.094 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:56:55.094Z,1526921815.094 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T16:56:55.095Z,1526921815.095 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:56:55.107Z,1526921815.107 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:56:55.531Z,1526921815.531 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:56:55.531Z,1526921815.531 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T16:56:55.905Z,1526921815.905 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:56:55.905Z,1526921815.905 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:56:55.906Z,1526921815.906 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T16:57:26.656Z,1526921846.656 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T16:57:42.281Z,1526921862.281 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T16:57:42.281Z,1526921862.281 [BPC1] Communications Fault, FailCount= 7
2018-05-21T16:57:42.282Z,1526921862.282 [BPC1](ERROR): Communications Fault
2018-05-21T16:57:42.305Z,1526921862.305 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T16:57:43.512Z,1526921863.512 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T16:57:43.512Z,1526921863.512 [BPC1] No Fault, FailCount= 7
2018-05-21T16:57:57.423Z,1526921877.423 [NAL9602](INFO): Powering down
2018-05-21T16:59:56.079Z,1526921996.079 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T16:59:56.079Z,1526921996.079 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T16:59:56.079Z,1526921996.079 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T16:59:56.092Z,1526921996.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T16:59:56.494Z,1526921996.494 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T16:59:56.495Z,1526921996.495 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T16:59:56.880Z,1526921996.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T16:59:56.880Z,1526921996.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T16:59:56.880Z,1526921996.880 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:01:43.445Z,1526922103.445 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T17:01:43.445Z,1526922103.445 [Default:CheckIn:C.Wait] Stopped
2018-05-21T17:01:43.445Z,1526922103.445 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T17:01:43.445Z,1526922103.445 [Default:CheckIn:D] Running Loop=1
2018-05-21T17:01:43.849Z,1526922103.849 [Default:CheckIn:D] Stopped
2018-05-21T17:01:43.849Z,1526922103.849 [Default:CheckIn:E] Running Loop=1
2018-05-21T17:01:44.247Z,1526922104.247 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1040.180143 min 
2018-05-21T17:01:44.247Z,1526922104.247 [Default:CheckIn:E] Stopped
2018-05-21T17:01:44.248Z,1526922104.248 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T17:01:44.248Z,1526922104.248 [Default:CheckIn] Stopped
2018-05-21T17:01:44.248Z,1526922104.248 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T17:01:44.248Z,1526922104.248 [Default:CheckIn](INFO): Running loop #102
2018-05-21T17:01:44.248Z,1526922104.248 [Default:CheckIn] Running Loop=102
2018-05-21T17:01:44.248Z,1526922104.248 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T17:01:44.248Z,1526922104.248 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T17:01:47.722Z,1526922107.722 [NAL9602](INFO): Powering up
2018-05-21T17:01:58.620Z,1526922118.620 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:02:30.620Z,1526922150.620 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T17:02:30.698Z,1526922150.698 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T17:02:30.698Z,1526922150.698 [NAL9602] Data Fault, FailCount= 2
2018-05-21T17:02:30.698Z,1526922150.698 [NAL9602](ERROR): Data Fault
2018-05-21T17:02:30.784Z,1526922150.784 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T17:02:31.024Z,1526922151.024 [NAL9602](INFO): Powering down
2018-05-21T17:02:31.885Z,1526922151.885 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T17:02:31.885Z,1526922151.885 [NAL9602] No Fault, FailCount= 2
2018-05-21T17:02:57.068Z,1526922177.068 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:02:57.068Z,1526922177.068 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T17:02:57.068Z,1526922177.068 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:02:57.080Z,1526922177.080 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:02:57.490Z,1526922177.490 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:02:57.490Z,1526922177.490 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T17:02:57.874Z,1526922177.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:02:57.875Z,1526922177.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:02:57.875Z,1526922177.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:03:01.428Z,1526922181.428 [NAL9602](INFO): Powering up NAL9602
2018-05-21T17:03:12.628Z,1526922192.628 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:03:13.436Z,1526922193.436 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T17:03:13.436Z,1526922193.436 [NAL9602] Data Fault, FailCount= 3
2018-05-21T17:03:13.436Z,1526922193.436 [NAL9602](ERROR): Data Fault
2018-05-21T17:03:13.524Z,1526922193.524 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T17:03:13.827Z,1526922193.827 [NAL9602](INFO): Powering down
2018-05-21T17:03:14.690Z,1526922194.690 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T17:03:14.690Z,1526922194.690 [NAL9602] No Fault, FailCount= 3
2018-05-21T17:03:44.227Z,1526922224.227 [NAL9602](INFO): Powering up NAL9602
2018-05-21T17:03:55.140Z,1526922235.140 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:04:48.099Z,1526922288.099 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T17:04:50.181Z,1526922290.181 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T17:04:50.181Z,1526922290.181 [BPC1] Communications Fault, FailCount= 8
2018-05-21T17:04:50.181Z,1526922290.181 [BPC1](ERROR): Communications Fault
2018-05-21T17:04:50.208Z,1526922290.208 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T17:04:51.393Z,1526922291.393 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T17:04:51.393Z,1526922291.393 [BPC1] No Fault, FailCount= 8
2018-05-21T17:05:58.150Z,1526922358.150 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:05:58.150Z,1526922358.150 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T17:05:58.150Z,1526922358.150 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:05:58.183Z,1526922358.183 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:05:58.593Z,1526922358.593 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:05:58.593Z,1526922358.593 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T17:05:58.953Z,1526922358.953 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:05:58.954Z,1526922358.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:05:58.954Z,1526922358.954 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:06:44.555Z,1526922404.555 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T17:01:44.2Z
2018-05-21T17:06:44.555Z,1526922404.555 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T17:06:44.555Z,1526922404.555 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T17:06:48.573Z,1526922408.573 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0303.lzma
2018-05-21T17:06:49.356Z,1526922409.356 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0303.lzma.bak
2018-05-21T17:06:49.356Z,1526922409.356 [DataOverHttps](INFO): SBD MOMSN=8288446
2018-05-21T17:07:03.169Z,1526922423.169 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T17:07:03.270Z,1526922423.270 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0304.lzma
2018-05-21T17:07:04.060Z,1526922424.060 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0304.lzma.bak
2018-05-21T17:07:04.060Z,1526922424.060 [DataOverHttps](INFO): SBD MOMSN=8288448
2018-05-21T17:07:04.776Z,1526922424.776 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T17:07:04.776Z,1526922424.776 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T17:07:04.776Z,1526922424.776 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T17:07:33.651Z,1526922453.651 [NAL9602](INFO): Powering down
2018-05-21T17:08:59.034Z,1526922539.034 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:08:59.035Z,1526922539.035 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T17:08:59.035Z,1526922539.035 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:08:59.047Z,1526922539.047 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:08:59.442Z,1526922539.442 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:08:59.442Z,1526922539.442 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T17:08:59.842Z,1526922539.842 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:08:59.843Z,1526922539.843 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:08:59.843Z,1526922539.843 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:11:24.329Z,1526922684.329 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T17:11:24.329Z,1526922684.329 [BPC1] Communications Fault, FailCount= 9
2018-05-21T17:11:24.329Z,1526922684.329 [BPC1](ERROR): Communications Fault
2018-05-21T17:11:24.399Z,1526922684.399 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T17:11:25.551Z,1526922685.551 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T17:11:25.551Z,1526922685.551 [BPC1] No Fault, FailCount= 9
2018-05-21T17:11:59.947Z,1526922719.947 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:11:59.947Z,1526922719.947 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T17:11:59.947Z,1526922719.947 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:11:59.994Z,1526922719.994 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:11:59.995Z,1526922719.995 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:12:05.141Z,1526922725.141 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T17:12:05.142Z,1526922725.142 [Default:CheckIn:C.Wait] Stopped
2018-05-21T17:12:05.142Z,1526922725.142 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T17:12:05.142Z,1526922725.142 [Default:CheckIn:D] Running Loop=1
2018-05-21T17:12:05.548Z,1526922725.548 [Default:CheckIn:D] Stopped
2018-05-21T17:12:05.548Z,1526922725.548 [Default:CheckIn:E] Running Loop=1
2018-05-21T17:12:05.952Z,1526922725.952 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1050.541797 min 
2018-05-21T17:12:05.952Z,1526922725.952 [Default:CheckIn:E] Stopped
2018-05-21T17:12:05.952Z,1526922725.952 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T17:12:05.952Z,1526922725.952 [Default:CheckIn] Stopped
2018-05-21T17:12:05.952Z,1526922725.952 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T17:12:05.952Z,1526922725.952 [Default:CheckIn](INFO): Running loop #103
2018-05-21T17:12:05.953Z,1526922725.953 [Default:CheckIn] Running Loop=103
2018-05-21T17:12:05.953Z,1526922725.953 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T17:12:05.953Z,1526922725.953 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T17:12:09.540Z,1526922729.540 [NAL9602](INFO): Powering up
2018-05-21T17:12:20.436Z,1526922740.436 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:12:52.436Z,1526922772.436 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T17:12:52.510Z,1526922772.510 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T17:12:52.510Z,1526922772.510 [NAL9602] Data Fault, FailCount= 4
2018-05-21T17:12:52.510Z,1526922772.510 [NAL9602](ERROR): Data Fault
2018-05-21T17:12:52.649Z,1526922772.649 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T17:12:52.835Z,1526922772.835 [NAL9602](INFO): Powering down
2018-05-21T17:12:53.716Z,1526922773.716 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T17:12:53.716Z,1526922773.716 [NAL9602] No Fault, FailCount= 4
2018-05-21T17:13:23.004Z,1526922803.004 [NAL9602](INFO): Powering up NAL9602
2018-05-21T17:13:34.203Z,1526922814.203 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:14:48.259Z,1526922888.259 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T17:17:06.028Z,1526923026.028 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T17:12:05.0Z
2018-05-21T17:17:06.028Z,1526923026.028 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T17:17:06.028Z,1526923026.028 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T17:17:10.607Z,1526923030.607 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0306.lzma
2018-05-21T17:17:11.396Z,1526923031.396 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0306.lzma.bak
2018-05-21T17:17:11.396Z,1526923031.396 [DataOverHttps](INFO): SBD MOMSN=8288454
2018-05-21T17:17:25.120Z,1526923045.120 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T17:17:25.276Z,1526923045.276 [DataOverHttps](INFO): Sending 295 bytes from file Logs/20180520T234132/Express0307.lzma
2018-05-21T17:17:26.076Z,1526923046.076 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0307.lzma.bak
2018-05-21T17:17:26.076Z,1526923046.076 [DataOverHttps](INFO): SBD MOMSN=8288456
2018-05-21T17:17:26.811Z,1526923046.811 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T17:17:26.811Z,1526923046.811 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T17:17:26.811Z,1526923046.811 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T17:17:55.443Z,1526923075.443 [NAL9602](INFO): Powering down
2018-05-21T17:18:43.246Z,1526923123.246 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T17:18:43.246Z,1526923123.246 [BPC1] Communications Fault, FailCount= 10
2018-05-21T17:18:43.246Z,1526923123.246 [BPC1](ERROR): Communications Fault
2018-05-21T17:18:43.273Z,1526923123.273 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T17:18:43.274Z,1526923123.274 [CBIT](CRITICAL): Communications Fault in component: BPC1
2018-05-21T17:18:43.672Z,1526923123.672 [CBIT](INFO): Critical error at 20180521T171843
2018-05-21T17:22:26.970Z,1526923346.970 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T17:22:26.970Z,1526923346.970 [Default:CheckIn:C.Wait] Stopped
2018-05-21T17:22:26.970Z,1526923346.970 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T17:22:26.970Z,1526923346.970 [Default:CheckIn:D] Running Loop=1
2018-05-21T17:22:27.363Z,1526923347.363 [Default:CheckIn:D] Stopped
2018-05-21T17:22:27.363Z,1526923347.363 [Default:CheckIn:E] Running Loop=1
2018-05-21T17:22:27.779Z,1526923347.779 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1060.905404 min 
2018-05-21T17:22:27.780Z,1526923347.780 [Default:CheckIn:E] Stopped
2018-05-21T17:22:27.780Z,1526923347.780 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T17:22:27.780Z,1526923347.780 [Default:CheckIn] Stopped
2018-05-21T17:22:27.780Z,1526923347.780 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T17:22:27.780Z,1526923347.780 [Default:CheckIn](INFO): Running loop #104
2018-05-21T17:22:27.780Z,1526923347.780 [Default:CheckIn] Running Loop=104
2018-05-21T17:22:27.780Z,1526923347.780 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T17:22:27.780Z,1526923347.780 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T17:22:31.124Z,1526923351.124 [NAL9602](INFO): Powering up
2018-05-21T17:22:42.272Z,1526923362.272 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:22:43.072Z,1526923363.072 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T17:22:43.072Z,1526923363.072 [NAL9602] Data Fault, FailCount= 5
2018-05-21T17:22:43.072Z,1526923363.072 [NAL9602](ERROR): Data Fault
2018-05-21T17:22:43.145Z,1526923363.145 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T17:22:43.146Z,1526923363.146 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T17:22:43.471Z,1526923363.471 [NAL9602](INFO): Powering down
2018-05-21T17:22:43.566Z,1526923363.566 [CBIT](INFO): Critical error at 20180521T172243
2018-05-21T17:23:43.510Z,1526923423.510 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T17:23:43.510Z,1526923423.510 [BPC1] No Fault, FailCount= 10
2018-05-21T17:24:43.109Z,1526923483.109 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T17:24:43.109Z,1526923483.109 [NAL9602] No Fault, FailCount= 5
2018-05-21T17:24:43.459Z,1526923483.459 [NAL9602](INFO): Powering up NAL9602
2018-05-21T17:24:48.319Z,1526923488.319 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T17:24:54.260Z,1526923494.260 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:26:09.568Z,1526923569.568 [BPC1](ERROR): Failed to parse Bank B battery data
2018-05-21T17:27:00.168Z,1526923620.168 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:27:00.168Z,1526923620.168 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T17:27:00.553Z,1526923620.553 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:27:00.554Z,1526923620.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:27:00.554Z,1526923620.554 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:27:28.160Z,1526923648.160 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T17:22:27.8Z
2018-05-21T17:27:28.160Z,1526923648.160 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T17:27:28.160Z,1526923648.160 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T17:27:31.888Z,1526923651.888 [DataOverHttps](INFO): Sending 97 bytes from file Logs/20180520T234132/Courier0309.lzma
2018-05-21T17:27:32.688Z,1526923652.688 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0309.lzma.bak
2018-05-21T17:27:32.688Z,1526923652.688 [DataOverHttps](INFO): SBD MOMSN=8288462
2018-05-21T17:27:46.369Z,1526923666.369 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0310.lzma
2018-05-21T17:27:47.168Z,1526923667.168 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0310.lzma.bak
2018-05-21T17:27:47.168Z,1526923667.168 [DataOverHttps](INFO): SBD MOMSN=8288466
2018-05-21T17:27:48.095Z,1526923668.095 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T17:27:48.095Z,1526923668.095 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T17:27:48.095Z,1526923668.095 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T17:29:57.448Z,1526923797.448 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T17:30:00.716Z,1526923800.716 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:30:00.717Z,1526923800.717 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T17:30:00.717Z,1526923800.717 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:30:00.729Z,1526923800.729 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:30:01.117Z,1526923801.117 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:30:01.117Z,1526923801.117 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T17:30:01.482Z,1526923801.482 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:30:01.482Z,1526923801.482 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:30:01.483Z,1526923801.483 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:30:28.255Z,1526923828.255 [NAL9602](INFO): Powering down
2018-05-21T17:31:47.883Z,1526923907.883 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T17:31:47.884Z,1526923907.884 [BPC1] Communications Fault, FailCount= 1
2018-05-21T17:31:47.884Z,1526923907.884 [BPC1](ERROR): Communications Fault
2018-05-21T17:31:47.914Z,1526923907.914 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T17:31:51.829Z,1526923911.829 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T17:31:51.829Z,1526923911.829 [BPC1] No Fault, FailCount= 1
2018-05-21T17:32:48.287Z,1526923968.287 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T17:32:48.287Z,1526923968.287 [Default:CheckIn:C.Wait] Stopped
2018-05-21T17:32:48.287Z,1526923968.287 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T17:32:48.287Z,1526923968.287 [Default:CheckIn:D] Running Loop=1
2018-05-21T17:32:48.693Z,1526923968.693 [Default:CheckIn:D] Stopped
2018-05-21T17:32:48.693Z,1526923968.693 [Default:CheckIn:E] Running Loop=1
2018-05-21T17:32:49.093Z,1526923969.093 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1071.260872 min 
2018-05-21T17:32:49.093Z,1526923969.093 [Default:CheckIn:E] Stopped
2018-05-21T17:32:49.094Z,1526923969.094 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T17:32:49.094Z,1526923969.094 [Default:CheckIn] Stopped
2018-05-21T17:32:49.094Z,1526923969.094 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T17:32:49.094Z,1526923969.094 [Default:CheckIn](INFO): Running loop #105
2018-05-21T17:32:49.094Z,1526923969.094 [Default:CheckIn] Running Loop=105
2018-05-21T17:32:49.094Z,1526923969.094 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T17:32:49.094Z,1526923969.094 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T17:32:52.276Z,1526923972.276 [NAL9602](INFO): Powering up
2018-05-21T17:33:01.880Z,1526923981.880 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:33:01.881Z,1526923981.881 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T17:33:01.881Z,1526923981.881 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:33:01.894Z,1526923981.894 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:33:02.307Z,1526923982.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:33:02.307Z,1526923982.307 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T17:33:02.683Z,1526923982.683 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:33:02.684Z,1526923982.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:33:02.684Z,1526923982.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:33:03.440Z,1526923983.440 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:33:35.440Z,1526924015.440 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T17:33:35.514Z,1526924015.514 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T17:33:35.514Z,1526924015.514 [NAL9602] Data Fault, FailCount= 1
2018-05-21T17:33:35.514Z,1526924015.514 [NAL9602](ERROR): Data Fault
2018-05-21T17:33:35.589Z,1526924015.589 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T17:33:35.839Z,1526924015.839 [NAL9602](INFO): Powering down
2018-05-21T17:33:36.701Z,1526924016.701 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T17:33:36.701Z,1526924016.701 [NAL9602] No Fault, FailCount= 1
2018-05-21T17:34:05.907Z,1526924045.907 [NAL9602](INFO): Powering up NAL9602
2018-05-21T17:34:17.108Z,1526924057.108 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:34:48.370Z,1526924088.370 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T17:36:02.804Z,1526924162.804 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:36:02.804Z,1526924162.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T17:36:02.804Z,1526924162.804 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:36:02.817Z,1526924162.817 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:36:03.220Z,1526924163.220 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:36:03.220Z,1526924163.220 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T17:36:03.610Z,1526924163.610 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:36:03.610Z,1526924163.610 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:36:03.611Z,1526924163.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:37:49.332Z,1526924269.332 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T17:32:49.1Z
2018-05-21T17:37:49.332Z,1526924269.332 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T17:37:49.332Z,1526924269.332 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T17:37:53.507Z,1526924273.507 [BPC1](ERROR): Failed to receive data from both battery packs
2018-05-21T17:37:53.507Z,1526924273.507 [BPC1] Communications Fault, FailCount= 2
2018-05-21T17:37:53.507Z,1526924273.507 [BPC1](ERROR): Communications Fault
2018-05-21T17:37:53.565Z,1526924273.565 [CBIT](ERROR): Communications Fault in component: BPC1
2018-05-21T17:37:53.587Z,1526924273.587 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0312.lzma
2018-05-21T17:37:54.380Z,1526924274.380 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0312.lzma.bak
2018-05-21T17:37:54.381Z,1526924274.381 [DataOverHttps](INFO): SBD MOMSN=8288471
2018-05-21T17:37:54.475Z,1526924274.475 [CBIT](INFO): Clearing failed state for component BPC1
2018-05-21T17:37:54.475Z,1526924274.475 [BPC1] No Fault, FailCount= 2
2018-05-21T17:38:08.183Z,1526924288.183 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T17:38:08.280Z,1526924288.280 [DataOverHttps](INFO): Sending 239 bytes from file Logs/20180520T234132/Express0313.lzma
2018-05-21T17:38:09.052Z,1526924289.052 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0313.lzma.bak
2018-05-21T17:38:09.052Z,1526924289.052 [DataOverHttps](INFO): SBD MOMSN=8288473
2018-05-21T17:38:09.781Z,1526924289.781 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T17:38:09.781Z,1526924289.781 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T17:38:09.781Z,1526924289.781 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T17:38:38.356Z,1526924318.356 [NAL9602](INFO): Powering down
2018-05-21T17:39:04.010Z,1526924344.010 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:39:04.011Z,1526924344.011 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T17:39:04.011Z,1526924344.011 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:39:04.023Z,1526924344.023 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:39:04.417Z,1526924344.417 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:39:04.417Z,1526924344.417 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T17:39:04.810Z,1526924344.810 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:39:04.811Z,1526924344.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:39:04.811Z,1526924344.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:42:05.071Z,1526924525.071 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:42:05.071Z,1526924525.071 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T17:42:05.071Z,1526924525.071 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:42:05.086Z,1526924525.086 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:42:05.496Z,1526924525.496 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:42:05.496Z,1526924525.496 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T17:42:05.878Z,1526924525.878 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:42:05.879Z,1526924525.879 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:42:05.879Z,1526924525.879 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:43:10.313Z,1526924590.313 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T17:43:10.313Z,1526924590.313 [Default:CheckIn:C.Wait] Stopped
2018-05-21T17:43:10.313Z,1526924590.313 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T17:43:10.313Z,1526924590.313 [Default:CheckIn:D] Running Loop=1
2018-05-21T17:43:10.716Z,1526924590.716 [Default:CheckIn:D] Stopped
2018-05-21T17:43:10.716Z,1526924590.716 [Default:CheckIn:E] Running Loop=1
2018-05-21T17:43:11.117Z,1526924591.117 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1081.627930 min 
2018-05-21T17:43:11.117Z,1526924591.117 [Default:CheckIn:E] Stopped
2018-05-21T17:43:11.117Z,1526924591.117 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T17:43:11.117Z,1526924591.117 [Default:CheckIn] Stopped
2018-05-21T17:43:11.118Z,1526924591.118 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T17:43:11.118Z,1526924591.118 [Default:CheckIn](INFO): Running loop #106
2018-05-21T17:43:11.118Z,1526924591.118 [Default:CheckIn] Running Loop=106
2018-05-21T17:43:11.118Z,1526924591.118 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T17:43:11.118Z,1526924591.118 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T17:43:14.291Z,1526924594.291 [NAL9602](INFO): Powering up
2018-05-21T17:43:25.440Z,1526924605.440 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:43:26.240Z,1526924606.240 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T17:43:26.241Z,1526924606.241 [NAL9602] Data Fault, FailCount= 2
2018-05-21T17:43:26.241Z,1526924606.241 [NAL9602](ERROR): Data Fault
2018-05-21T17:43:26.328Z,1526924606.328 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T17:43:26.639Z,1526924606.639 [NAL9602](INFO): Powering down
2018-05-21T17:43:27.498Z,1526924607.498 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T17:43:27.507Z,1526924607.507 [NAL9602] No Fault, FailCount= 2
2018-05-21T17:43:57.040Z,1526924637.040 [NAL9602](INFO): Powering up NAL9602
2018-05-21T17:44:08.239Z,1526924648.239 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:44:48.701Z,1526924688.701 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T17:45:05.882Z,1526924705.882 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:45:05.882Z,1526924705.882 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T17:45:05.883Z,1526924705.883 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:45:05.895Z,1526924705.895 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:45:06.311Z,1526924706.311 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:45:06.311Z,1526924706.311 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T17:45:06.695Z,1526924706.695 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:45:06.695Z,1526924706.695 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:45:06.696Z,1526924706.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:48:06.748Z,1526924886.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:48:06.748Z,1526924886.748 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T17:48:06.748Z,1526924886.748 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:48:06.760Z,1526924886.760 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:48:07.155Z,1526924887.155 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:48:07.156Z,1526924887.156 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T17:48:07.561Z,1526924887.561 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:48:07.561Z,1526924887.561 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:48:07.562Z,1526924887.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:48:11.140Z,1526924891.140 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T17:43:11.1Z
2018-05-21T17:48:11.141Z,1526924891.141 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T17:48:11.141Z,1526924891.141 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T17:48:15.145Z,1526924895.145 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180520T234132/Courier0315.lzma
2018-05-21T17:48:15.946Z,1526924895.946 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0315.lzma.bak
2018-05-21T17:48:15.946Z,1526924895.946 [DataOverHttps](INFO): SBD MOMSN=8288478
2018-05-21T17:48:25.022Z,1526924905.022 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0316.lzma
2018-05-21T17:48:25.824Z,1526924905.824 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0316.lzma.bak
2018-05-21T17:48:25.824Z,1526924905.824 [DataOverHttps](INFO): SBD MOMSN=8288480
2018-05-21T17:48:26.562Z,1526924906.562 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T17:48:26.562Z,1526924906.562 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T17:48:26.562Z,1526924906.562 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T17:49:14.635Z,1526924954.635 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T17:49:45.116Z,1526924985.116 [NAL9602](INFO): Powering down
2018-05-21T17:51:07.754Z,1526925067.754 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:51:07.754Z,1526925067.754 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T17:51:07.754Z,1526925067.754 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:51:07.769Z,1526925067.769 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:51:08.174Z,1526925068.174 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:51:08.174Z,1526925068.174 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T17:51:08.551Z,1526925068.551 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:51:08.552Z,1526925068.552 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:51:08.552Z,1526925068.552 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:53:27.041Z,1526925207.041 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T17:53:27.041Z,1526925207.041 [Default:CheckIn:C.Wait] Stopped
2018-05-21T17:53:27.041Z,1526925207.041 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T17:53:27.041Z,1526925207.041 [Default:CheckIn:D] Running Loop=1
2018-05-21T17:53:27.446Z,1526925207.446 [Default:CheckIn:D] Stopped
2018-05-21T17:53:27.446Z,1526925207.446 [Default:CheckIn:E] Running Loop=1
2018-05-21T17:53:30.742Z,1526925210.742 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1091.906771 min 
2018-05-21T17:53:30.743Z,1526925210.743 [Default:CheckIn:E] Stopped
2018-05-21T17:53:30.743Z,1526925210.743 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T17:53:30.743Z,1526925210.743 [Default:CheckIn] Stopped
2018-05-21T17:53:30.743Z,1526925210.743 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T17:53:30.743Z,1526925210.743 [Default:CheckIn](INFO): Running loop #107
2018-05-21T17:53:30.743Z,1526925210.743 [Default:CheckIn] Running Loop=107
2018-05-21T17:53:30.743Z,1526925210.743 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T17:53:30.743Z,1526925210.743 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T17:53:31.171Z,1526925211.171 [NAL9602](INFO): Powering up
2018-05-21T17:53:41.972Z,1526925221.972 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:54:08.819Z,1526925248.819 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:54:08.819Z,1526925248.819 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T17:54:08.819Z,1526925248.819 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:54:08.831Z,1526925248.831 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:54:09.231Z,1526925249.231 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:54:09.231Z,1526925249.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T17:54:09.619Z,1526925249.619 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:54:09.619Z,1526925249.619 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:54:09.619Z,1526925249.619 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:54:13.968Z,1526925253.968 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T17:54:14.042Z,1526925254.042 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T17:54:14.042Z,1526925254.042 [NAL9602] Data Fault, FailCount= 3
2018-05-21T17:54:14.042Z,1526925254.042 [NAL9602](ERROR): Data Fault
2018-05-21T17:54:14.139Z,1526925254.139 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T17:54:14.375Z,1526925254.375 [NAL9602](INFO): Powering down
2018-05-21T17:54:15.224Z,1526925255.224 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T17:54:15.224Z,1526925255.224 [NAL9602] No Fault, FailCount= 3
2018-05-21T17:54:44.744Z,1526925284.744 [NAL9602](INFO): Powering up NAL9602
2018-05-21T17:54:48.827Z,1526925288.827 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T17:54:55.944Z,1526925295.944 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:54:56.744Z,1526925296.744 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T17:54:56.744Z,1526925296.744 [NAL9602] Data Fault, FailCount= 4
2018-05-21T17:54:56.744Z,1526925296.744 [NAL9602](ERROR): Data Fault
2018-05-21T17:54:56.836Z,1526925296.836 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T17:54:57.143Z,1526925297.143 [NAL9602](INFO): Powering down
2018-05-21T17:54:58.018Z,1526925298.018 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T17:54:58.018Z,1526925298.018 [NAL9602] No Fault, FailCount= 4
2018-05-21T17:55:27.148Z,1526925327.148 [NAL9602](INFO): Powering up NAL9602
2018-05-21T17:55:38.324Z,1526925338.324 [NAL9602](INFO): NAL9602 initialized
2018-05-21T17:57:09.686Z,1526925429.686 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T17:57:09.686Z,1526925429.686 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T17:57:09.687Z,1526925429.687 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T17:57:09.699Z,1526925429.699 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T17:57:10.092Z,1526925430.092 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T17:57:10.092Z,1526925430.092 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T17:57:10.491Z,1526925430.491 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T17:57:10.492Z,1526925430.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T17:57:10.492Z,1526925430.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T17:58:31.771Z,1526925511.771 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T17:53:30.7Z
2018-05-21T17:58:31.771Z,1526925511.771 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T17:58:31.771Z,1526925511.771 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T17:58:36.766Z,1526925516.766 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0318.lzma
2018-05-21T17:58:37.900Z,1526925517.900 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0318.lzma.bak
2018-05-21T17:58:37.900Z,1526925517.900 [DataOverHttps](INFO): SBD MOMSN=8288485
2018-05-21T17:58:46.360Z,1526925526.360 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T17:58:46.448Z,1526925526.448 [DataOverHttps](INFO): Sending 258 bytes from file Logs/20180520T234132/Express0319.lzma
2018-05-21T17:58:47.248Z,1526925527.248 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0319.lzma.bak
2018-05-21T17:58:47.248Z,1526925527.248 [DataOverHttps](INFO): SBD MOMSN=8288487
2018-05-21T17:58:47.958Z,1526925527.958 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T17:58:47.958Z,1526925527.958 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T17:58:47.958Z,1526925527.958 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T17:59:16.615Z,1526925556.615 [NAL9602](INFO): Powering down
2018-05-21T18:00:10.632Z,1526925610.632 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:00:10.632Z,1526925610.632 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T18:00:10.632Z,1526925610.632 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:00:10.644Z,1526925610.644 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:00:11.053Z,1526925611.053 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:00:11.053Z,1526925611.053 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T18:00:11.438Z,1526925611.438 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:00:11.439Z,1526925611.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:00:11.439Z,1526925611.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:03:11.629Z,1526925791.629 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:03:11.630Z,1526925791.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T18:03:11.630Z,1526925791.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:03:11.651Z,1526925791.651 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:03:12.031Z,1526925792.031 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:03:12.031Z,1526925792.031 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T18:03:12.419Z,1526925792.419 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:03:12.420Z,1526925792.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:03:12.420Z,1526925792.420 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:03:48.429Z,1526925828.429 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T18:03:48.429Z,1526925828.429 [Default:CheckIn:C.Wait] Stopped
2018-05-21T18:03:48.429Z,1526925828.429 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T18:03:48.429Z,1526925828.429 [Default:CheckIn:D] Running Loop=1
2018-05-21T18:03:48.823Z,1526925828.823 [Default:CheckIn:D] Stopped
2018-05-21T18:03:48.823Z,1526925828.823 [Default:CheckIn:E] Running Loop=1
2018-05-21T18:03:49.224Z,1526925829.224 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1102.263021 min 
2018-05-21T18:03:49.224Z,1526925829.224 [Default:CheckIn:E] Stopped
2018-05-21T18:03:49.224Z,1526925829.224 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T18:03:49.224Z,1526925829.224 [Default:CheckIn] Stopped
2018-05-21T18:03:49.224Z,1526925829.224 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T18:03:49.225Z,1526925829.225 [Default:CheckIn](INFO): Running loop #108
2018-05-21T18:03:49.225Z,1526925829.225 [Default:CheckIn] Running Loop=108
2018-05-21T18:03:49.225Z,1526925829.225 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T18:03:49.225Z,1526925829.225 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T18:03:52.682Z,1526925832.682 [NAL9602](INFO): Powering up
2018-05-21T18:04:03.556Z,1526925843.556 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:04:35.556Z,1526925875.556 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T18:04:35.638Z,1526925875.638 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T18:04:35.638Z,1526925875.638 [NAL9602] Data Fault, FailCount= 5
2018-05-21T18:04:35.638Z,1526925875.638 [NAL9602](ERROR): Data Fault
2018-05-21T18:04:35.726Z,1526925875.726 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T18:04:35.727Z,1526925875.727 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T18:04:35.956Z,1526925875.956 [NAL9602](INFO): Powering down
2018-05-21T18:04:36.028Z,1526925876.028 [CBIT](INFO): Critical error at 20180521T180435
2018-05-21T18:04:49.207Z,1526925889.207 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T18:06:12.476Z,1526925972.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:06:12.476Z,1526925972.476 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T18:06:12.476Z,1526925972.476 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:06:12.507Z,1526925972.507 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:06:12.886Z,1526925972.886 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:06:12.886Z,1526925972.886 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T18:06:13.274Z,1526925973.274 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:06:13.275Z,1526925973.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:06:13.275Z,1526925973.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:06:35.690Z,1526925995.690 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T18:06:35.690Z,1526925995.690 [NAL9602] No Fault, FailCount= 5
2018-05-21T18:06:36.028Z,1526925996.028 [NAL9602](INFO): Powering up NAL9602
2018-05-21T18:06:47.230Z,1526926007.230 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:06:48.028Z,1526926008.028 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T18:06:48.028Z,1526926008.028 [NAL9602] Data Fault, FailCount= 1
2018-05-21T18:06:48.028Z,1526926008.028 [NAL9602](ERROR): Data Fault
2018-05-21T18:06:48.113Z,1526926008.113 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T18:06:48.427Z,1526926008.427 [NAL9602](INFO): Powering down
2018-05-21T18:06:49.279Z,1526926009.279 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T18:06:49.280Z,1526926009.280 [NAL9602] No Fault, FailCount= 1
2018-05-21T18:07:18.591Z,1526926038.591 [NAL9602](INFO): Powering up NAL9602
2018-05-21T18:07:29.392Z,1526926049.392 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:08:49.431Z,1526926129.431 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T18:03:49.2Z
2018-05-21T18:08:49.431Z,1526926129.431 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T18:08:49.431Z,1526926129.431 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T18:08:53.901Z,1526926133.901 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0321.lzma
2018-05-21T18:08:54.704Z,1526926134.704 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0321.lzma.bak
2018-05-21T18:08:54.704Z,1526926134.704 [DataOverHttps](INFO): SBD MOMSN=8288493
2018-05-21T18:09:03.498Z,1526926143.498 [DataOverHttps](INFO): Sending 258 bytes from file Logs/20180520T234132/Express0322.lzma
2018-05-21T18:09:04.300Z,1526926144.300 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0322.lzma.bak
2018-05-21T18:09:04.300Z,1526926144.300 [DataOverHttps](INFO): SBD MOMSN=8288496
2018-05-21T18:09:05.008Z,1526926145.008 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T18:09:05.008Z,1526926145.008 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T18:09:05.008Z,1526926145.008 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T18:09:08.277Z,1526926148.277 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T18:09:13.622Z,1526926153.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:09:13.623Z,1526926153.623 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T18:09:13.623Z,1526926153.623 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:09:13.635Z,1526926153.635 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:09:14.032Z,1526926154.032 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:09:14.032Z,1526926154.032 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T18:09:14.422Z,1526926154.422 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:09:14.423Z,1526926154.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:09:14.423Z,1526926154.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:09:38.771Z,1526926178.771 [NAL9602](INFO): Powering down
2018-05-21T18:12:14.551Z,1526926334.551 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:12:14.551Z,1526926334.551 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T18:12:14.551Z,1526926334.551 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:12:14.563Z,1526926334.563 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:12:14.962Z,1526926334.962 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:12:14.962Z,1526926334.962 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T18:12:15.353Z,1526926335.353 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:12:15.353Z,1526926335.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:12:15.353Z,1526926335.353 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:14:05.461Z,1526926445.461 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T18:14:05.461Z,1526926445.461 [Default:CheckIn:C.Wait] Stopped
2018-05-21T18:14:05.461Z,1526926445.461 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T18:14:05.462Z,1526926445.462 [Default:CheckIn:D] Running Loop=1
2018-05-21T18:14:05.858Z,1526926445.858 [Default:CheckIn:D] Stopped
2018-05-21T18:14:05.858Z,1526926445.858 [Default:CheckIn:E] Running Loop=1
2018-05-21T18:14:06.251Z,1526926446.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1112.547005 min 
2018-05-21T18:14:06.251Z,1526926446.251 [Default:CheckIn:E] Stopped
2018-05-21T18:14:06.251Z,1526926446.251 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T18:14:06.251Z,1526926446.251 [Default:CheckIn] Stopped
2018-05-21T18:14:06.251Z,1526926446.251 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T18:14:06.251Z,1526926446.251 [Default:CheckIn](INFO): Running loop #109
2018-05-21T18:14:06.251Z,1526926446.251 [Default:CheckIn] Running Loop=109
2018-05-21T18:14:06.252Z,1526926446.252 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T18:14:06.252Z,1526926446.252 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T18:14:09.715Z,1526926449.715 [NAL9602](INFO): Powering up
2018-05-21T18:14:20.620Z,1526926460.620 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:14:49.500Z,1526926489.500 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T18:14:52.620Z,1526926492.620 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T18:14:52.695Z,1526926492.695 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T18:14:52.695Z,1526926492.695 [NAL9602] Data Fault, FailCount= 2
2018-05-21T18:14:52.695Z,1526926492.695 [NAL9602](ERROR): Data Fault
2018-05-21T18:14:52.804Z,1526926492.804 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T18:14:53.022Z,1526926493.022 [NAL9602](INFO): Powering down
2018-05-21T18:14:53.898Z,1526926493.898 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T18:14:53.899Z,1526926493.899 [NAL9602] No Fault, FailCount= 2
2018-05-21T18:15:15.575Z,1526926515.575 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:15:15.575Z,1526926515.575 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T18:15:15.575Z,1526926515.575 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:15:15.641Z,1526926515.641 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:15:15.938Z,1526926515.938 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:15:15.939Z,1526926515.939 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T18:15:16.336Z,1526926516.336 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:15:16.337Z,1526926516.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:15:16.337Z,1526926516.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:15:23.063Z,1526926523.063 [NAL9602](INFO): Powering up NAL9602
2018-05-21T18:15:34.259Z,1526926534.259 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:18:16.647Z,1526926696.647 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:18:16.647Z,1526926696.647 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T18:18:16.647Z,1526926696.647 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:18:16.672Z,1526926696.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:18:17.059Z,1526926697.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:18:17.059Z,1526926697.059 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T18:18:17.447Z,1526926697.447 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:18:17.447Z,1526926697.447 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:18:17.447Z,1526926697.447 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:19:06.640Z,1526926746.640 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T18:14:06.3Z
2018-05-21T18:19:06.640Z,1526926746.640 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T18:19:06.640Z,1526926746.640 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T18:19:10.316Z,1526926750.316 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0324.lzma
2018-05-21T18:19:11.116Z,1526926751.116 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0324.lzma.bak
2018-05-21T18:19:11.116Z,1526926751.116 [DataOverHttps](INFO): SBD MOMSN=8288502
2018-05-21T18:19:20.131Z,1526926760.131 [DataOverHttps](INFO): Sending 240 bytes from file Logs/20180520T234132/Express0325.lzma
2018-05-21T18:19:20.932Z,1526926760.932 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0325.lzma.bak
2018-05-21T18:19:20.932Z,1526926760.932 [DataOverHttps](INFO): SBD MOMSN=8288504
2018-05-21T18:19:21.663Z,1526926761.663 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T18:19:21.663Z,1526926761.663 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T18:19:21.663Z,1526926761.663 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T18:19:24.904Z,1526926764.904 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T18:19:55.403Z,1526926795.403 [NAL9602](INFO): Powering down
2018-05-21T18:21:17.514Z,1526926877.514 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:21:17.515Z,1526926877.515 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T18:21:17.515Z,1526926877.515 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:21:17.527Z,1526926877.527 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:21:17.919Z,1526926877.919 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:21:17.919Z,1526926877.919 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T18:21:18.310Z,1526926878.310 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:21:18.311Z,1526926878.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:21:18.311Z,1526926878.311 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:24:18.668Z,1526927058.668 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:24:18.668Z,1526927058.668 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T18:24:18.668Z,1526927058.668 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:24:18.680Z,1526927058.680 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:24:19.087Z,1526927059.087 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:24:19.087Z,1526927059.087 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T18:24:19.474Z,1526927059.474 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:24:19.475Z,1526927059.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:24:19.475Z,1526927059.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:24:21.880Z,1526927061.880 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T18:24:21.880Z,1526927061.880 [Default:CheckIn:C.Wait] Stopped
2018-05-21T18:24:21.880Z,1526927061.880 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T18:24:21.881Z,1526927061.881 [Default:CheckIn:D] Running Loop=1
2018-05-21T18:24:22.271Z,1526927062.271 [Default:CheckIn:D] Stopped
2018-05-21T18:24:22.271Z,1526927062.271 [Default:CheckIn:E] Running Loop=1
2018-05-21T18:24:22.672Z,1526927062.672 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1122.820443 min 
2018-05-21T18:24:22.672Z,1526927062.672 [Default:CheckIn:E] Stopped
2018-05-21T18:24:22.672Z,1526927062.672 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T18:24:22.673Z,1526927062.673 [Default:CheckIn] Stopped
2018-05-21T18:24:22.673Z,1526927062.673 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T18:24:22.673Z,1526927062.673 [Default:CheckIn](INFO): Running loop #110
2018-05-21T18:24:22.673Z,1526927062.673 [Default:CheckIn] Running Loop=110
2018-05-21T18:24:22.673Z,1526927062.673 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T18:24:22.673Z,1526927062.673 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T18:24:23.427Z,1526927063.427 [NAL9602](INFO): Powering up
2018-05-21T18:24:34.288Z,1526927074.288 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:24:35.088Z,1526927075.088 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T18:24:35.088Z,1526927075.088 [NAL9602] Data Fault, FailCount= 3
2018-05-21T18:24:35.088Z,1526927075.088 [NAL9602](ERROR): Data Fault
2018-05-21T18:24:35.169Z,1526927075.169 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T18:24:35.487Z,1526927075.487 [NAL9602](INFO): Powering down
2018-05-21T18:24:36.362Z,1526927076.362 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T18:24:36.362Z,1526927076.362 [NAL9602] No Fault, FailCount= 3
2018-05-21T18:24:49.565Z,1526927089.565 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T18:25:05.888Z,1526927105.888 [NAL9602](INFO): Powering up NAL9602
2018-05-21T18:25:17.087Z,1526927117.087 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:27:19.568Z,1526927239.568 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:27:19.569Z,1526927239.569 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T18:27:19.569Z,1526927239.569 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:27:19.582Z,1526927239.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:27:19.582Z,1526927239.582 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:29:22.857Z,1526927362.857 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T18:24:22.7Z
2018-05-21T18:29:22.857Z,1526927362.857 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T18:29:22.857Z,1526927362.857 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T18:29:26.812Z,1526927366.812 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0327.lzma
2018-05-21T18:29:27.612Z,1526927367.612 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0327.lzma.bak
2018-05-21T18:29:27.612Z,1526927367.612 [DataOverHttps](INFO): SBD MOMSN=8288509
2018-05-21T18:29:36.754Z,1526927376.754 [DataOverHttps](INFO): Sending 275 bytes from file Logs/20180520T234132/Express0328.lzma
2018-05-21T18:29:37.540Z,1526927377.540 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0328.lzma.bak
2018-05-21T18:29:37.540Z,1526927377.540 [DataOverHttps](INFO): SBD MOMSN=8288511
2018-05-21T18:29:38.256Z,1526927378.256 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T18:29:38.256Z,1526927378.256 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T18:29:38.257Z,1526927378.257 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T18:30:20.716Z,1526927420.716 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T18:30:21.565Z,1526927421.565 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395792 seconds old.
2018-05-21T18:30:21.964Z,1526927421.964 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.794825 seconds old.
2018-05-21T18:30:22.357Z,1526927422.357 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.187799 seconds old.
2018-05-21T18:30:22.761Z,1526927422.761 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.592108 seconds old.
2018-05-21T18:30:23.165Z,1526927423.165 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.996316 seconds old.
2018-05-21T18:30:23.556Z,1526927423.556 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.386711 seconds old.
2018-05-21T18:30:23.959Z,1526927423.959 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.789698 seconds old.
2018-05-21T18:30:24.364Z,1526927424.364 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.194987 seconds old.
2018-05-21T18:30:51.127Z,1526927451.127 [NAL9602](INFO): Powering down
2018-05-21T18:34:38.596Z,1526927678.596 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T18:34:38.596Z,1526927678.596 [Default:CheckIn:C.Wait] Stopped
2018-05-21T18:34:38.596Z,1526927678.596 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T18:34:38.596Z,1526927678.596 [Default:CheckIn:D] Running Loop=1
2018-05-21T18:34:38.996Z,1526927678.996 [Default:CheckIn:D] Stopped
2018-05-21T18:34:38.996Z,1526927678.996 [Default:CheckIn:E] Running Loop=1
2018-05-21T18:34:42.108Z,1526927682.108 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1133.099219 min 
2018-05-21T18:34:42.108Z,1526927682.108 [Default:CheckIn:E] Stopped
2018-05-21T18:34:42.109Z,1526927682.109 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T18:34:42.109Z,1526927682.109 [Default:CheckIn] Stopped
2018-05-21T18:34:42.109Z,1526927682.109 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T18:34:42.109Z,1526927682.109 [Default:CheckIn](INFO): Running loop #111
2018-05-21T18:34:42.109Z,1526927682.109 [Default:CheckIn] Running Loop=111
2018-05-21T18:34:42.109Z,1526927682.109 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T18:34:42.109Z,1526927682.109 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T18:34:42.547Z,1526927682.547 [NAL9602](INFO): Powering up
2018-05-21T18:34:49.807Z,1526927689.807 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T18:34:53.748Z,1526927693.748 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:35:25.748Z,1526927725.748 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T18:35:25.830Z,1526927725.830 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T18:35:25.830Z,1526927725.830 [NAL9602] Data Fault, FailCount= 4
2018-05-21T18:35:25.830Z,1526927725.830 [NAL9602](ERROR): Data Fault
2018-05-21T18:35:25.915Z,1526927725.915 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T18:35:26.147Z,1526927726.147 [NAL9602](INFO): Powering down
2018-05-21T18:35:27.018Z,1526927727.018 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T18:35:27.018Z,1526927727.018 [NAL9602] No Fault, FailCount= 4
2018-05-21T18:35:56.263Z,1526927756.263 [NAL9602](INFO): Powering up NAL9602
2018-05-21T18:36:07.464Z,1526927767.464 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:36:08.268Z,1526927768.268 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T18:36:08.269Z,1526927768.269 [NAL9602] Data Fault, FailCount= 5
2018-05-21T18:36:08.269Z,1526927768.269 [NAL9602](ERROR): Data Fault
2018-05-21T18:36:08.364Z,1526927768.364 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T18:36:08.364Z,1526927768.364 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T18:36:08.663Z,1526927768.663 [NAL9602](INFO): Powering down
2018-05-21T18:36:08.733Z,1526927768.733 [CBIT](INFO): Critical error at 20180521T183608
2018-05-21T18:38:08.318Z,1526927888.318 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T18:38:08.318Z,1526927888.318 [NAL9602] No Fault, FailCount= 5
2018-05-21T18:38:08.659Z,1526927888.659 [NAL9602](INFO): Powering up NAL9602
2018-05-21T18:38:19.860Z,1526927899.860 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:39:43.123Z,1526927983.123 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T18:34:42.1Z
2018-05-21T18:39:43.123Z,1526927983.123 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T18:39:43.123Z,1526927983.123 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T18:39:47.976Z,1526927987.976 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0330.lzma
2018-05-21T18:39:48.768Z,1526927988.768 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0330.lzma.bak
2018-05-21T18:39:48.768Z,1526927988.768 [DataOverHttps](INFO): SBD MOMSN=8288517
2018-05-21T18:39:58.036Z,1526927998.036 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T18:39:58.145Z,1526927998.145 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0331.lzma
2018-05-21T18:39:58.912Z,1526927998.912 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0331.lzma.bak
2018-05-21T18:39:58.912Z,1526927998.912 [DataOverHttps](INFO): SBD MOMSN=8288520
2018-05-21T18:39:59.625Z,1526927999.625 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T18:39:59.625Z,1526927999.625 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T18:39:59.625Z,1526927999.625 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T18:40:28.551Z,1526928028.551 [NAL9602](INFO): Powering down
2018-05-21T18:42:19.846Z,1526928139.846 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:42:19.846Z,1526928139.846 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T18:42:20.244Z,1526928140.244 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:42:20.245Z,1526928140.245 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:42:20.245Z,1526928140.245 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:44:49.823Z,1526928289.823 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T18:44:59.815Z,1526928299.815 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T18:44:59.815Z,1526928299.815 [Default:CheckIn:C.Wait] Stopped
2018-05-21T18:44:59.815Z,1526928299.815 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T18:44:59.815Z,1526928299.815 [Default:CheckIn:D] Running Loop=1
2018-05-21T18:45:00.225Z,1526928300.225 [Default:CheckIn:D] Stopped
2018-05-21T18:45:00.225Z,1526928300.225 [Default:CheckIn:E] Running Loop=1
2018-05-21T18:45:00.614Z,1526928300.614 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1143.453125 min 
2018-05-21T18:45:00.614Z,1526928300.614 [Default:CheckIn:E] Stopped
2018-05-21T18:45:00.614Z,1526928300.614 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T18:45:00.614Z,1526928300.614 [Default:CheckIn] Stopped
2018-05-21T18:45:00.615Z,1526928300.615 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T18:45:00.615Z,1526928300.615 [Default:CheckIn](INFO): Running loop #112
2018-05-21T18:45:00.615Z,1526928300.615 [Default:CheckIn] Running Loop=112
2018-05-21T18:45:00.615Z,1526928300.615 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T18:45:00.615Z,1526928300.615 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T18:45:01.367Z,1526928301.367 [NAL9602](INFO): Powering up
2018-05-21T18:45:12.232Z,1526928312.232 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:45:20.284Z,1526928320.284 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:45:20.284Z,1526928320.284 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T18:45:20.284Z,1526928320.284 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:45:20.297Z,1526928320.297 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:45:20.734Z,1526928320.734 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:45:20.734Z,1526928320.734 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T18:45:21.083Z,1526928321.083 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:45:21.083Z,1526928321.083 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:45:21.083Z,1526928321.083 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:45:44.232Z,1526928344.232 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T18:45:44.311Z,1526928344.311 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T18:45:44.311Z,1526928344.311 [NAL9602] Data Fault, FailCount= 1
2018-05-21T18:45:44.311Z,1526928344.311 [NAL9602](ERROR): Data Fault
2018-05-21T18:45:44.393Z,1526928344.393 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T18:45:44.631Z,1526928344.631 [NAL9602](INFO): Powering down
2018-05-21T18:45:45.489Z,1526928345.489 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T18:45:45.490Z,1526928345.490 [NAL9602] No Fault, FailCount= 1
2018-05-21T18:46:15.008Z,1526928375.008 [NAL9602](INFO): Powering up NAL9602
2018-05-21T18:46:26.208Z,1526928386.208 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:47:46.221Z,1526928466.221 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T18:47:46.221Z,1526928466.221 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T18:48:11.465Z,1526928491.465 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T18:48:11.465Z,1526928491.465 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T18:48:21.104Z,1526928501.104 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:48:21.104Z,1526928501.104 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T18:48:21.104Z,1526928501.104 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:48:21.117Z,1526928501.117 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:48:21.518Z,1526928501.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:48:21.518Z,1526928501.518 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T18:48:21.903Z,1526928501.903 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:48:21.903Z,1526928501.903 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:48:21.903Z,1526928501.903 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:50:00.789Z,1526928600.789 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T18:45:00.6Z
2018-05-21T18:50:00.789Z,1526928600.789 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T18:50:00.789Z,1526928600.789 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T18:50:05.205Z,1526928605.205 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0333.lzma
2018-05-21T18:50:06.004Z,1526928606.004 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0333.lzma.bak
2018-05-21T18:50:06.004Z,1526928606.004 [DataOverHttps](INFO): SBD MOMSN=8288526
2018-05-21T18:50:15.029Z,1526928615.029 [DataOverHttps](INFO): Sending 240 bytes from file Logs/20180520T234132/Express0334.lzma
2018-05-21T18:50:15.060Z,1526928615.060 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T18:50:15.824Z,1526928615.824 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0334.lzma.bak
2018-05-21T18:50:15.824Z,1526928615.824 [DataOverHttps](INFO): SBD MOMSN=8288528
2018-05-21T18:50:16.580Z,1526928616.580 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T18:50:16.581Z,1526928616.581 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T18:50:16.581Z,1526928616.581 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T18:50:45.551Z,1526928645.551 [NAL9602](INFO): Powering down
2018-05-21T18:51:21.995Z,1526928681.995 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:51:21.995Z,1526928681.995 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T18:51:21.995Z,1526928681.995 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:51:22.008Z,1526928682.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:51:22.414Z,1526928682.414 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:51:22.414Z,1526928682.414 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T18:51:22.796Z,1526928682.796 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:51:22.796Z,1526928682.796 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:51:22.797Z,1526928682.797 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:54:08.748Z,1526928848.748 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.395784 seconds old.
2018-05-21T18:54:08.751Z,1526928848.751 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396402 seconds old.
2018-05-21T18:54:09.147Z,1526928849.147 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.793597 seconds old.
2018-05-21T18:54:09.149Z,1526928849.149 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.794838 seconds old.
2018-05-21T18:54:09.553Z,1526928849.553 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.200080 seconds old.
2018-05-21T18:54:09.555Z,1526928849.555 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.200591 seconds old.
2018-05-21T18:54:09.948Z,1526928849.948 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.595828 seconds old.
2018-05-21T18:54:09.951Z,1526928849.951 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.596430 seconds old.
2018-05-21T18:54:23.149Z,1526928863.149 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:54:23.149Z,1526928863.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T18:54:23.149Z,1526928863.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:54:23.162Z,1526928863.162 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:54:23.561Z,1526928863.561 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:54:23.562Z,1526928863.562 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T18:54:23.946Z,1526928863.946 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:54:23.947Z,1526928863.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:54:23.947Z,1526928863.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:54:49.967Z,1526928889.967 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T18:55:16.794Z,1526928916.794 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T18:55:16.794Z,1526928916.794 [Default:CheckIn:C.Wait] Stopped
2018-05-21T18:55:16.794Z,1526928916.794 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T18:55:16.802Z,1526928916.802 [Default:CheckIn:D] Running Loop=1
2018-05-21T18:55:17.215Z,1526928917.215 [Default:CheckIn:D] Stopped
2018-05-21T18:55:17.215Z,1526928917.215 [Default:CheckIn:E] Running Loop=1
2018-05-21T18:55:17.595Z,1526928917.595 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1153.736198 min 
2018-05-21T18:55:17.595Z,1526928917.595 [Default:CheckIn:E] Stopped
2018-05-21T18:55:17.595Z,1526928917.595 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T18:55:17.595Z,1526928917.595 [Default:CheckIn] Stopped
2018-05-21T18:55:17.595Z,1526928917.595 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T18:55:17.595Z,1526928917.595 [Default:CheckIn](INFO): Running loop #113
2018-05-21T18:55:17.595Z,1526928917.595 [Default:CheckIn] Running Loop=113
2018-05-21T18:55:17.596Z,1526928917.596 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T18:55:17.596Z,1526928917.596 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T18:55:22.248Z,1526928922.248 [NAL9602](INFO): Powering up
2018-05-21T18:55:33.147Z,1526928933.147 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:55:33.947Z,1526928933.947 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T18:55:33.948Z,1526928933.948 [NAL9602] Data Fault, FailCount= 2
2018-05-21T18:55:33.948Z,1526928933.948 [NAL9602](ERROR): Data Fault
2018-05-21T18:55:34.062Z,1526928934.062 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T18:55:34.347Z,1526928934.347 [NAL9602](INFO): Powering down
2018-05-21T18:55:35.232Z,1526928935.232 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T18:55:35.232Z,1526928935.232 [NAL9602] No Fault, FailCount= 2
2018-05-21T18:56:04.747Z,1526928964.747 [NAL9602](INFO): Powering up NAL9602
2018-05-21T18:56:15.951Z,1526928975.951 [NAL9602](INFO): NAL9602 initialized
2018-05-21T18:57:23.996Z,1526929043.996 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T18:57:23.996Z,1526929043.996 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T18:57:23.996Z,1526929043.996 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T18:57:24.021Z,1526929044.021 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T18:57:24.403Z,1526929044.403 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T18:57:24.403Z,1526929044.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T18:57:24.793Z,1526929044.793 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T18:57:24.794Z,1526929044.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T18:57:24.794Z,1526929044.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T18:58:03.145Z,1526929083.145 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T18:58:03.145Z,1526929083.145 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T18:58:45.219Z,1526929125.219 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T18:58:45.219Z,1526929125.219 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T19:00:17.654Z,1526929217.654 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T18:55:17.6Z
2018-05-21T19:00:17.655Z,1526929217.655 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T19:00:17.655Z,1526929217.655 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T19:00:21.980Z,1526929221.980 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0336.lzma
2018-05-21T19:00:22.780Z,1526929222.780 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0336.lzma.bak
2018-05-21T19:00:22.780Z,1526929222.780 [DataOverHttps](INFO): SBD MOMSN=8288533
2018-05-21T19:00:26.768Z,1526929226.768 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:00:26.768Z,1526929226.768 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T19:00:26.768Z,1526929226.768 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:00:26.781Z,1526929226.781 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:00:26.933Z,1526929226.933 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:00:26.933Z,1526929226.933 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T19:00:27.251Z,1526929227.251 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:00:27.251Z,1526929227.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:00:27.251Z,1526929227.251 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:00:31.795Z,1526929231.795 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20180520T234132/Express0337.lzma
2018-05-21T19:00:32.568Z,1526929232.568 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0337.lzma.bak
2018-05-21T19:00:32.568Z,1526929232.568 [DataOverHttps](INFO): SBD MOMSN=8288535
2018-05-21T19:00:33.293Z,1526929233.293 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T19:00:33.293Z,1526929233.293 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T19:00:33.293Z,1526929233.293 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T19:01:21.431Z,1526929281.431 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T19:01:51.951Z,1526929311.951 [NAL9602](INFO): Powering down
2018-05-21T19:03:27.595Z,1526929407.595 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:03:27.596Z,1526929407.596 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T19:03:27.596Z,1526929407.596 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:03:27.608Z,1526929407.608 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:03:28.007Z,1526929408.007 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:03:28.007Z,1526929408.007 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T19:03:28.390Z,1526929408.390 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:03:28.391Z,1526929408.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:03:28.391Z,1526929408.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:04:49.988Z,1526929489.988 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T19:05:33.577Z,1526929533.577 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T19:05:33.577Z,1526929533.577 [Default:CheckIn:C.Wait] Stopped
2018-05-21T19:05:33.577Z,1526929533.577 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T19:05:33.578Z,1526929533.578 [Default:CheckIn:D] Running Loop=1
2018-05-21T19:05:33.984Z,1526929533.984 [Default:CheckIn:D] Stopped
2018-05-21T19:05:33.985Z,1526929533.985 [Default:CheckIn:E] Running Loop=1
2018-05-21T19:05:34.380Z,1526929534.380 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1164.015755 min 
2018-05-21T19:05:34.380Z,1526929534.380 [Default:CheckIn:E] Stopped
2018-05-21T19:05:34.380Z,1526929534.380 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T19:05:34.381Z,1526929534.381 [Default:CheckIn] Stopped
2018-05-21T19:05:34.381Z,1526929534.381 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T19:05:34.381Z,1526929534.381 [Default:CheckIn](INFO): Running loop #114
2018-05-21T19:05:34.381Z,1526929534.381 [Default:CheckIn] Running Loop=114
2018-05-21T19:05:34.381Z,1526929534.381 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T19:05:34.381Z,1526929534.381 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T19:05:37.965Z,1526929537.965 [NAL9602](INFO): Powering up
2018-05-21T19:05:48.860Z,1526929548.860 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:06:20.860Z,1526929580.860 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T19:06:20.934Z,1526929580.934 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T19:06:20.934Z,1526929580.934 [NAL9602] Data Fault, FailCount= 3
2018-05-21T19:06:20.934Z,1526929580.934 [NAL9602](ERROR): Data Fault
2018-05-21T19:06:21.018Z,1526929581.018 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T19:06:21.263Z,1526929581.263 [NAL9602](INFO): Powering down
2018-05-21T19:06:22.111Z,1526929582.111 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T19:06:22.111Z,1526929582.111 [NAL9602] No Fault, FailCount= 3
2018-05-21T19:06:28.510Z,1526929588.510 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:06:28.511Z,1526929588.511 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T19:06:28.511Z,1526929588.511 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:06:28.523Z,1526929588.523 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:06:28.924Z,1526929588.924 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:06:28.924Z,1526929588.924 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T19:06:29.317Z,1526929589.317 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:06:29.317Z,1526929589.317 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:06:29.318Z,1526929589.318 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:06:51.267Z,1526929611.267 [NAL9602](INFO): Powering up NAL9602
2018-05-21T19:07:02.475Z,1526929622.475 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:07:03.268Z,1526929623.268 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T19:07:03.268Z,1526929623.268 [NAL9602] Data Fault, FailCount= 4
2018-05-21T19:07:03.268Z,1526929623.268 [NAL9602](ERROR): Data Fault
2018-05-21T19:07:03.363Z,1526929623.363 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T19:07:03.671Z,1526929623.671 [NAL9602](INFO): Powering down
2018-05-21T19:07:04.535Z,1526929624.535 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T19:07:04.535Z,1526929624.535 [NAL9602] No Fault, FailCount= 4
2018-05-21T19:07:33.676Z,1526929653.676 [NAL9602](INFO): Powering up NAL9602
2018-05-21T19:07:44.488Z,1526929664.488 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:09:29.388Z,1526929769.388 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:09:29.388Z,1526929769.388 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T19:09:29.388Z,1526929769.388 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:09:29.400Z,1526929769.400 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:09:29.795Z,1526929769.795 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:09:29.795Z,1526929769.795 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T19:09:30.186Z,1526929770.186 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:09:30.186Z,1526929770.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:09:30.186Z,1526929770.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:10:34.575Z,1526929834.575 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T19:05:34.4Z
2018-05-21T19:10:34.575Z,1526929834.575 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T19:10:34.576Z,1526929834.576 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T19:10:38.253Z,1526929838.253 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0339.lzma
2018-05-21T19:10:39.052Z,1526929839.052 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0339.lzma.bak
2018-05-21T19:10:39.052Z,1526929839.052 [DataOverHttps](INFO): SBD MOMSN=8288540
2018-05-21T19:10:47.947Z,1526929847.947 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0340.lzma
2018-05-21T19:10:48.740Z,1526929848.740 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0340.lzma.bak
2018-05-21T19:10:48.740Z,1526929848.740 [DataOverHttps](INFO): SBD MOMSN=8288542
2018-05-21T19:10:49.518Z,1526929849.518 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T19:10:49.518Z,1526929849.518 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T19:10:49.518Z,1526929849.518 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T19:10:52.917Z,1526929852.917 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T19:11:23.435Z,1526929883.435 [NAL9602](INFO): Powering down
2018-05-21T19:12:30.357Z,1526929950.357 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:12:30.357Z,1526929950.357 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T19:12:30.357Z,1526929950.357 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:12:30.370Z,1526929950.370 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:12:30.774Z,1526929950.774 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:12:30.774Z,1526929950.774 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T19:12:31.160Z,1526929951.160 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:12:31.160Z,1526929951.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:12:31.160Z,1526929951.160 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:14:50.135Z,1526930090.135 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T19:15:31.455Z,1526930131.455 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:15:31.455Z,1526930131.455 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T19:15:31.455Z,1526930131.455 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:15:31.468Z,1526930131.468 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:15:31.887Z,1526930131.887 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:15:31.887Z,1526930131.887 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T19:15:32.260Z,1526930132.260 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:15:32.261Z,1526930132.261 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:15:32.261Z,1526930132.261 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:15:49.849Z,1526930149.849 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T19:15:49.849Z,1526930149.849 [Default:CheckIn:C.Wait] Stopped
2018-05-21T19:15:49.849Z,1526930149.849 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T19:15:49.849Z,1526930149.849 [Default:CheckIn:D] Running Loop=1
2018-05-21T19:15:50.249Z,1526930150.249 [Default:CheckIn:D] Stopped
2018-05-21T19:15:50.249Z,1526930150.249 [Default:CheckIn:E] Running Loop=1
2018-05-21T19:15:50.659Z,1526930150.659 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1174.286849 min 
2018-05-21T19:15:50.659Z,1526930150.659 [Default:CheckIn:E] Stopped
2018-05-21T19:15:50.659Z,1526930150.659 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T19:15:50.660Z,1526930150.660 [Default:CheckIn] Stopped
2018-05-21T19:15:50.660Z,1526930150.660 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T19:15:50.660Z,1526930150.660 [Default:CheckIn](INFO): Running loop #115
2018-05-21T19:15:50.660Z,1526930150.660 [Default:CheckIn] Running Loop=115
2018-05-21T19:15:50.660Z,1526930150.660 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T19:15:50.660Z,1526930150.660 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T19:15:54.031Z,1526930154.031 [NAL9602](INFO): Powering up
2018-05-21T19:16:05.180Z,1526930165.180 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:16:37.180Z,1526930197.180 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T19:16:37.258Z,1526930197.258 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T19:16:37.258Z,1526930197.258 [NAL9602] Data Fault, FailCount= 5
2018-05-21T19:16:37.258Z,1526930197.258 [NAL9602](ERROR): Data Fault
2018-05-21T19:16:37.349Z,1526930197.349 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T19:16:37.349Z,1526930197.349 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T19:16:37.583Z,1526930197.583 [NAL9602](INFO): Powering down
2018-05-21T19:16:37.643Z,1526930197.643 [CBIT](INFO): Critical error at 20180521T191637
2018-05-21T19:18:32.376Z,1526930312.376 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:18:32.376Z,1526930312.376 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T19:18:32.377Z,1526930312.377 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:18:32.389Z,1526930312.389 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:18:32.792Z,1526930312.792 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:18:32.793Z,1526930312.793 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T19:18:33.180Z,1526930313.180 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:18:33.181Z,1526930313.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:18:33.181Z,1526930313.181 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:18:37.596Z,1526930317.596 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T19:18:37.596Z,1526930317.596 [NAL9602] No Fault, FailCount= 5
2018-05-21T19:18:37.931Z,1526930317.931 [NAL9602](INFO): Powering up NAL9602
2018-05-21T19:18:49.132Z,1526930329.132 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:18:49.932Z,1526930329.932 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T19:18:49.932Z,1526930329.932 [NAL9602] Data Fault, FailCount= 1
2018-05-21T19:18:49.932Z,1526930329.932 [NAL9602](ERROR): Data Fault
2018-05-21T19:18:50.015Z,1526930330.015 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T19:18:50.331Z,1526930330.331 [NAL9602](INFO): Powering down
2018-05-21T19:18:51.193Z,1526930331.193 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T19:18:51.193Z,1526930331.193 [NAL9602] No Fault, FailCount= 1
2018-05-21T19:19:20.455Z,1526930360.455 [NAL9602](INFO): Powering up NAL9602
2018-05-21T19:19:31.662Z,1526930371.662 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:20:50.675Z,1526930450.675 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T19:15:50.7Z
2018-05-21T19:20:50.675Z,1526930450.675 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T19:20:50.675Z,1526930450.675 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T19:20:55.111Z,1526930455.111 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0342.lzma
2018-05-21T19:20:55.904Z,1526930455.904 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0342.lzma.bak
2018-05-21T19:20:55.904Z,1526930455.904 [DataOverHttps](INFO): SBD MOMSN=8288548
2018-05-21T19:21:04.782Z,1526930464.782 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180520T234132/Express0343.lzma
2018-05-21T19:21:05.580Z,1526930465.580 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0343.lzma.bak
2018-05-21T19:21:05.580Z,1526930465.580 [DataOverHttps](INFO): SBD MOMSN=8288551
2018-05-21T19:21:06.295Z,1526930466.295 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T19:21:06.295Z,1526930466.295 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T19:21:06.295Z,1526930466.295 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T19:21:09.489Z,1526930469.489 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T19:21:33.211Z,1526930493.211 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:21:33.211Z,1526930493.211 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T19:21:33.212Z,1526930493.212 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:21:33.256Z,1526930493.256 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:21:33.616Z,1526930493.616 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:21:33.617Z,1526930493.617 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T19:21:34.003Z,1526930494.003 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:21:34.003Z,1526930494.003 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:21:34.003Z,1526930494.003 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:21:39.963Z,1526930499.963 [NAL9602](INFO): Powering down
2018-05-21T19:24:34.227Z,1526930674.227 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:24:34.228Z,1526930674.228 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T19:24:34.228Z,1526930674.228 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:24:34.241Z,1526930674.241 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:24:34.646Z,1526930674.646 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:24:34.646Z,1526930674.646 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T19:24:35.029Z,1526930675.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:24:35.030Z,1526930675.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:24:35.030Z,1526930675.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:24:50.235Z,1526930690.235 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T19:26:06.644Z,1526930766.644 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T19:26:06.644Z,1526930766.644 [Default:CheckIn:C.Wait] Stopped
2018-05-21T19:26:06.644Z,1526930766.644 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T19:26:06.644Z,1526930766.644 [Default:CheckIn:D] Running Loop=1
2018-05-21T19:26:07.044Z,1526930767.044 [Default:CheckIn:D] Stopped
2018-05-21T19:26:07.044Z,1526930767.044 [Default:CheckIn:E] Running Loop=1
2018-05-21T19:26:10.208Z,1526930770.208 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1184.566667 min 
2018-05-21T19:26:10.209Z,1526930770.209 [Default:CheckIn:E] Stopped
2018-05-21T19:26:10.209Z,1526930770.209 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T19:26:10.209Z,1526930770.209 [Default:CheckIn] Stopped
2018-05-21T19:26:10.209Z,1526930770.209 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T19:26:10.209Z,1526930770.209 [Default:CheckIn](INFO): Running loop #116
2018-05-21T19:26:10.209Z,1526930770.209 [Default:CheckIn] Running Loop=116
2018-05-21T19:26:10.209Z,1526930770.209 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T19:26:10.210Z,1526930770.210 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T19:26:10.631Z,1526930770.631 [NAL9602](INFO): Powering up
2018-05-21T19:26:21.832Z,1526930781.832 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:26:53.832Z,1526930813.832 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T19:26:53.914Z,1526930813.914 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T19:26:53.914Z,1526930813.914 [NAL9602] Data Fault, FailCount= 2
2018-05-21T19:26:53.914Z,1526930813.914 [NAL9602](ERROR): Data Fault
2018-05-21T19:26:54.017Z,1526930814.017 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T19:26:54.231Z,1526930814.231 [NAL9602](INFO): Powering down
2018-05-21T19:26:55.105Z,1526930815.105 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T19:26:55.105Z,1526930815.105 [NAL9602] No Fault, FailCount= 2
2018-05-21T19:27:24.396Z,1526930844.396 [NAL9602](INFO): Powering up NAL9602
2018-05-21T19:27:35.254Z,1526930855.254 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:27:35.254Z,1526930855.254 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T19:27:35.254Z,1526930855.254 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:27:35.283Z,1526930855.283 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:27:35.604Z,1526930855.604 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:27:35.663Z,1526930855.663 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:27:35.663Z,1526930855.663 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T19:27:36.049Z,1526930856.049 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:27:36.049Z,1526930856.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:27:36.049Z,1526930856.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:30:36.325Z,1526931036.325 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:30:36.325Z,1526931036.325 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T19:30:36.325Z,1526931036.325 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:30:36.351Z,1526931036.351 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:30:36.733Z,1526931036.733 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:30:36.733Z,1526931036.733 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T19:30:37.134Z,1526931037.134 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:30:37.135Z,1526931037.135 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:30:37.135Z,1526931037.135 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:31:10.836Z,1526931070.836 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T19:26:10.2Z
2018-05-21T19:31:10.836Z,1526931070.836 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T19:31:10.836Z,1526931070.836 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T19:31:15.795Z,1526931075.795 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0345.lzma
2018-05-21T19:31:16.588Z,1526931076.588 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0345.lzma.bak
2018-05-21T19:31:16.588Z,1526931076.588 [DataOverHttps](INFO): SBD MOMSN=8288557
2018-05-21T19:31:25.440Z,1526931085.440 [DataOverHttps](INFO): Sending 239 bytes from file Logs/20180520T234132/Express0346.lzma
2018-05-21T19:31:25.444Z,1526931085.444 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T19:31:26.240Z,1526931086.240 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0346.lzma.bak
2018-05-21T19:31:26.240Z,1526931086.240 [DataOverHttps](INFO): SBD MOMSN=8288559
2018-05-21T19:31:26.979Z,1526931086.979 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T19:31:26.979Z,1526931086.979 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T19:31:26.979Z,1526931086.979 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T19:31:55.903Z,1526931115.903 [NAL9602](INFO): Powering down
2018-05-21T19:33:37.235Z,1526931217.235 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:33:37.235Z,1526931217.235 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T19:33:37.235Z,1526931217.235 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:33:37.280Z,1526931217.280 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:33:37.639Z,1526931217.639 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:33:37.639Z,1526931217.639 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T19:33:38.027Z,1526931218.027 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:33:38.028Z,1526931218.028 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:33:38.028Z,1526931218.028 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:34:50.417Z,1526931290.417 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T19:36:27.283Z,1526931387.283 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T19:36:27.283Z,1526931387.283 [Default:CheckIn:C.Wait] Stopped
2018-05-21T19:36:27.283Z,1526931387.283 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T19:36:27.283Z,1526931387.283 [Default:CheckIn:D] Running Loop=1
2018-05-21T19:36:27.685Z,1526931387.685 [Default:CheckIn:D] Stopped
2018-05-21T19:36:27.685Z,1526931387.685 [Default:CheckIn:E] Running Loop=1
2018-05-21T19:36:28.076Z,1526931388.076 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1194.910677 min 
2018-05-21T19:36:28.076Z,1526931388.076 [Default:CheckIn:E] Stopped
2018-05-21T19:36:28.077Z,1526931388.077 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T19:36:28.077Z,1526931388.077 [Default:CheckIn] Stopped
2018-05-21T19:36:28.077Z,1526931388.077 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T19:36:28.077Z,1526931388.077 [Default:CheckIn](INFO): Running loop #117
2018-05-21T19:36:28.077Z,1526931388.077 [Default:CheckIn] Running Loop=117
2018-05-21T19:36:28.077Z,1526931388.077 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T19:36:28.077Z,1526931388.077 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T19:36:31.722Z,1526931391.722 [NAL9602](INFO): Powering up
2018-05-21T19:36:38.270Z,1526931398.270 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:36:38.271Z,1526931398.271 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T19:36:38.271Z,1526931398.271 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:36:38.286Z,1526931398.286 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:36:38.678Z,1526931398.678 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:36:38.678Z,1526931398.678 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T19:36:39.074Z,1526931399.074 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:36:39.075Z,1526931399.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:36:39.075Z,1526931399.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:36:42.624Z,1526931402.624 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:36:43.420Z,1526931403.420 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T19:36:43.420Z,1526931403.420 [NAL9602] Data Fault, FailCount= 3
2018-05-21T19:36:43.420Z,1526931403.420 [NAL9602](ERROR): Data Fault
2018-05-21T19:36:43.487Z,1526931403.487 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T19:36:43.819Z,1526931403.819 [NAL9602](INFO): Powering down
2018-05-21T19:36:44.688Z,1526931404.688 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T19:36:44.688Z,1526931404.688 [NAL9602] No Fault, FailCount= 3
2018-05-21T19:37:14.220Z,1526931434.220 [NAL9602](INFO): Powering up NAL9602
2018-05-21T19:37:25.420Z,1526931445.420 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:39:39.134Z,1526931579.134 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:39:39.134Z,1526931579.134 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T19:39:39.134Z,1526931579.134 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:39:39.163Z,1526931579.163 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:39:39.545Z,1526931579.545 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:39:39.545Z,1526931579.545 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T19:39:39.938Z,1526931579.938 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:39:39.939Z,1526931579.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:39:39.939Z,1526931579.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:41:28.361Z,1526931688.361 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T19:36:28.1Z
2018-05-21T19:41:28.361Z,1526931688.361 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T19:41:28.361Z,1526931688.361 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T19:41:32.026Z,1526931692.026 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0348.lzma
2018-05-21T19:41:32.828Z,1526931692.828 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0348.lzma.bak
2018-05-21T19:41:32.828Z,1526931692.828 [DataOverHttps](INFO): SBD MOMSN=8288564
2018-05-21T19:41:41.980Z,1526931701.980 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0349.lzma
2018-05-21T19:41:42.756Z,1526931702.756 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0349.lzma.bak
2018-05-21T19:41:42.756Z,1526931702.756 [DataOverHttps](INFO): SBD MOMSN=8288566
2018-05-21T19:41:43.490Z,1526931703.490 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T19:41:43.490Z,1526931703.490 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T19:41:43.490Z,1526931703.490 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T19:42:32.064Z,1526931752.064 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T19:42:40.104Z,1526931760.104 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T19:42:40.104Z,1526931760.104 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T19:42:40.104Z,1526931760.104 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T19:42:40.116Z,1526931760.116 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:42:40.116Z,1526931760.116 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T19:43:02.531Z,1526931782.531 [NAL9602](INFO): Powering down
2018-05-21T19:44:50.720Z,1526931890.720 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T19:46:43.712Z,1526932003.712 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T19:46:43.712Z,1526932003.712 [Default:CheckIn:C.Wait] Stopped
2018-05-21T19:46:43.712Z,1526932003.712 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T19:46:43.712Z,1526932003.712 [Default:CheckIn:D] Running Loop=1
2018-05-21T19:46:44.111Z,1526932004.111 [Default:CheckIn:D] Stopped
2018-05-21T19:46:44.111Z,1526932004.111 [Default:CheckIn:E] Running Loop=1
2018-05-21T19:46:44.519Z,1526932004.519 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1205.184505 min 
2018-05-21T19:46:44.519Z,1526932004.519 [Default:CheckIn:E] Stopped
2018-05-21T19:46:44.519Z,1526932004.519 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T19:46:44.519Z,1526932004.519 [Default:CheckIn] Stopped
2018-05-21T19:46:44.519Z,1526932004.519 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T19:46:44.519Z,1526932004.519 [Default:CheckIn](INFO): Running loop #118
2018-05-21T19:46:44.520Z,1526932004.520 [Default:CheckIn] Running Loop=118
2018-05-21T19:46:44.520Z,1526932004.520 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T19:46:44.520Z,1526932004.520 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T19:46:48.094Z,1526932008.094 [NAL9602](INFO): Powering up
2018-05-21T19:46:58.952Z,1526932018.952 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:51:44.860Z,1526932304.860 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T19:46:44.5Z
2018-05-21T19:51:44.860Z,1526932304.860 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T19:51:44.860Z,1526932304.860 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T19:51:48.733Z,1526932308.733 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0351.lzma
2018-05-21T19:51:49.536Z,1526932309.536 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0351.lzma.bak
2018-05-21T19:51:49.536Z,1526932309.536 [DataOverHttps](INFO): SBD MOMSN=8288571
2018-05-21T19:51:58.462Z,1526932318.462 [DataOverHttps](INFO): Sending 255 bytes from file Logs/20180520T234132/Express0352.lzma
2018-05-21T19:51:59.264Z,1526932319.264 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0352.lzma.bak
2018-05-21T19:51:59.264Z,1526932319.264 [DataOverHttps](INFO): SBD MOMSN=8288573
2018-05-21T19:52:00.006Z,1526932320.006 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T19:52:00.007Z,1526932320.007 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T19:52:00.007Z,1526932320.007 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T19:52:03.180Z,1526932323.180 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T19:52:33.679Z,1526932353.679 [NAL9602](INFO): Powering down
2018-05-21T19:54:50.981Z,1526932490.981 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T19:56:50.300Z,1526932610.300 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.387571 seconds old.
2018-05-21T19:56:50.708Z,1526932610.708 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.795381 seconds old.
2018-05-21T19:56:51.099Z,1526932611.099 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.186053 seconds old.
2018-05-21T19:56:51.508Z,1526932611.508 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.595184 seconds old.
2018-05-21T19:56:51.900Z,1526932611.900 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.987498 seconds old.
2018-05-21T19:56:52.311Z,1526932612.311 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.398126 seconds old.
2018-05-21T19:56:52.704Z,1526932612.704 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.791082 seconds old.
2018-05-21T19:56:53.101Z,1526932613.101 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.187784 seconds old.
2018-05-21T19:56:53.500Z,1526932613.500 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.587546 seconds old.
2018-05-21T19:56:53.909Z,1526932613.909 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.995739 seconds old.
2018-05-21T19:56:54.300Z,1526932614.300 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.386875 seconds old.
2018-05-21T19:56:54.701Z,1526932614.701 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.787716 seconds old.
2018-05-21T19:56:55.147Z,1526932615.147 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.233758 seconds old.
2018-05-21T19:56:55.500Z,1526932615.500 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.586997 seconds old.
2018-05-21T19:56:55.899Z,1526932615.899 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.986590 seconds old.
2018-05-21T19:56:56.304Z,1526932616.304 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.391089 seconds old.
2018-05-21T19:56:56.704Z,1526932616.704 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.791094 seconds old.
2018-05-21T19:56:57.100Z,1526932617.100 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.187533 seconds old.
2018-05-21T19:56:57.504Z,1526932617.504 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.591103 seconds old.
2018-05-21T19:56:57.904Z,1526932617.904 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.991118 seconds old.
2018-05-21T19:56:58.301Z,1526932618.301 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.387750 seconds old.
2018-05-21T19:56:58.700Z,1526932618.700 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.787236 seconds old.
2018-05-21T19:56:59.163Z,1526932619.163 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.249614 seconds old.
2018-05-21T19:56:59.498Z,1526932619.498 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.584601 seconds old.
2018-05-21T19:56:59.908Z,1526932619.908 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.995414 seconds old.
2018-05-21T19:57:00.312Z,1526932620.312 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.399351 seconds old.
2018-05-21T19:57:00.316Z,1526932620.316 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T19:57:00.316Z,1526932620.316 [Default:CheckIn:C.Wait] Stopped
2018-05-21T19:57:00.316Z,1526932620.316 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T19:57:00.316Z,1526932620.316 [Default:CheckIn:D] Running Loop=1
2018-05-21T19:57:00.698Z,1526932620.698 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.785294 seconds old.
2018-05-21T19:57:00.702Z,1526932620.702 [Default:CheckIn:D] Stopped
2018-05-21T19:57:00.702Z,1526932620.702 [Default:CheckIn:E] Running Loop=1
2018-05-21T19:57:01.104Z,1526932621.104 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.190939 seconds old.
2018-05-21T19:57:01.108Z,1526932621.108 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1215.461068 min 
2018-05-21T19:57:01.108Z,1526932621.108 [Default:CheckIn:E] Stopped
2018-05-21T19:57:01.108Z,1526932621.108 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T19:57:01.108Z,1526932621.108 [Default:CheckIn] Stopped
2018-05-21T19:57:01.108Z,1526932621.108 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T19:57:01.109Z,1526932621.109 [Default:CheckIn](INFO): Running loop #119
2018-05-21T19:57:01.109Z,1526932621.109 [Default:CheckIn] Running Loop=119
2018-05-21T19:57:01.109Z,1526932621.109 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T19:57:01.109Z,1526932621.109 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T19:57:01.506Z,1526932621.506 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.593124 seconds old.
2018-05-21T19:57:04.568Z,1526932624.568 [NAL9602](INFO): Powering up
2018-05-21T19:57:04.611Z,1526932624.611 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.698520 seconds old.
2018-05-21T19:57:04.726Z,1526932624.726 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.812830 seconds old.
2018-05-21T19:57:05.101Z,1526932625.101 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.187600 seconds old.
2018-05-21T19:57:05.508Z,1526932625.508 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.595492 seconds old.
2018-05-21T19:57:05.904Z,1526932625.904 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.991269 seconds old.
2018-05-21T19:57:15.456Z,1526932635.456 [NAL9602](INFO): NAL9602 initialized
2018-05-21T19:57:16.256Z,1526932636.256 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T19:57:16.256Z,1526932636.256 [NAL9602] Data Fault, FailCount= 4
2018-05-21T19:57:16.256Z,1526932636.256 [NAL9602](ERROR): Data Fault
2018-05-21T19:57:16.360Z,1526932636.360 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T19:57:16.667Z,1526932636.667 [NAL9602](INFO): Powering down
2018-05-21T19:57:17.526Z,1526932637.526 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T19:57:17.526Z,1526932637.526 [NAL9602] No Fault, FailCount= 4
2018-05-21T19:57:40.326Z,1526932660.326 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T19:57:40.326Z,1526932660.326 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T19:57:40.695Z,1526932660.695 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T19:57:40.695Z,1526932660.695 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T19:57:40.695Z,1526932660.695 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T19:57:47.057Z,1526932667.057 [NAL9602](INFO): Powering up NAL9602
2018-05-21T19:57:55.896Z,1526932675.896 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.383318 seconds old.
2018-05-21T19:57:55.898Z,1526932675.898 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.383642 seconds old.
2018-05-21T19:57:56.308Z,1526932676.308 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.795268 seconds old.
2018-05-21T19:57:56.310Z,1526932676.310 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.795580 seconds old.
2018-05-21T19:57:56.704Z,1526932676.704 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.191702 seconds old.
2018-05-21T19:57:56.707Z,1526932676.707 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.192255 seconds old.
2018-05-21T19:57:57.109Z,1526932677.109 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.596121 seconds old.
2018-05-21T19:57:57.111Z,1526932677.111 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.596663 seconds old.
2018-05-21T19:57:58.256Z,1526932678.256 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:00:31.942Z,1526932831.942 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-05-21T20:00:40.798Z,1526932840.798 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:00:40.798Z,1526932840.798 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T20:00:40.798Z,1526932840.798 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:00:40.823Z,1526932840.823 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:00:41.263Z,1526932841.263 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:00:41.263Z,1526932841.263 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T20:00:41.593Z,1526932841.593 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:00:41.593Z,1526932841.593 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:00:41.594Z,1526932841.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:01:31.942Z,1526932891.942 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-05-21T20:02:01.249Z,1526932921.249 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T19:57:01.1Z
2018-05-21T20:02:01.249Z,1526932921.249 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T20:02:01.249Z,1526932921.249 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T20:02:06.343Z,1526932926.343 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.399780
2018-05-21T20:02:20.894Z,1526932940.894 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002579
2018-05-21T20:02:25.054Z,1526932945.054 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0354.lzma
2018-05-21T20:02:25.848Z,1526932945.848 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0354.lzma.bak
2018-05-21T20:02:25.848Z,1526932945.848 [DataOverHttps](INFO): SBD MOMSN=8288578
2018-05-21T20:02:33.854Z,1526932953.854 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2018-05-21T20:02:33.854Z,1526932953.854 [PNI_TCM] Data Fault, FailCount= 1
2018-05-21T20:02:33.854Z,1526932953.854 [PNI_TCM](ERROR): Data Fault
2018-05-21T20:02:33.901Z,1526932953.901 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.812019 seconds old.
2018-05-21T20:02:33.925Z,1526932953.925 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.826223 seconds old.
2018-05-21T20:02:33.949Z,1526932953.949 [CBIT](ERROR): Data Fault in component: PNI_TCM
2018-05-21T20:02:33.996Z,1526932953.996 [PNI_TCM](INFO): Powering down
2018-05-21T20:02:34.112Z,1526932954.112 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.022816 seconds old.
2018-05-21T20:02:34.134Z,1526932954.134 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.014896 seconds old.
2018-05-21T20:02:34.398Z,1526932954.398 [PNI_TCM](FAULT): LCB fault:  Software Overcurrent.
2018-05-21T20:02:34.398Z,1526932954.398 [PNI_TCM] Hardware Fault, FailCount= 1
2018-05-21T20:02:34.398Z,1526932954.398 [PNI_TCM](ERROR): Hardware Fault
2018-05-21T20:02:34.421Z,1526932954.421 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.331728 seconds old.
2018-05-21T20:02:34.451Z,1526932954.451 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.351980 seconds old.
2018-05-21T20:02:34.800Z,1526932954.800 [PNI_TCM](FAULT): LCB fault:  Software Overcurrent.
2018-05-21T20:02:34.825Z,1526932954.825 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.735624 seconds old.
2018-05-21T20:02:34.831Z,1526932954.831 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.732079 seconds old.
2018-05-21T20:02:35.192Z,1526932955.192 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.103387 seconds old.
2018-05-21T20:02:35.211Z,1526932955.211 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.112276 seconds old.
2018-05-21T20:02:35.248Z,1526932955.248 [CBIT](INFO): Clearing failed state for component PNI_TCM
2018-05-21T20:02:35.248Z,1526932955.248 [PNI_TCM] No Fault, FailCount= 1
2018-05-21T20:02:35.620Z,1526932955.620 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.531123 seconds old.
2018-05-21T20:02:35.622Z,1526932955.622 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.523191 seconds old.
2018-05-21T20:02:35.992Z,1526932955.992 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.903089 seconds old.
2018-05-21T20:02:35.994Z,1526932955.994 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.895159 seconds old.
2018-05-21T20:02:36.428Z,1526932956.428 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.339409 seconds old.
2018-05-21T20:02:36.435Z,1526932956.435 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.335806 seconds old.
2018-05-21T20:02:36.844Z,1526932956.844 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.754564 seconds old.
2018-05-21T20:02:36.846Z,1526932956.846 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.746625 seconds old.
2018-05-21T20:02:37.228Z,1526932957.228 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.138789 seconds old.
2018-05-21T20:02:37.234Z,1526932957.234 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.130909 seconds old.
2018-05-21T20:02:37.630Z,1526932957.630 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.541371 seconds old.
2018-05-21T20:02:37.633Z,1526932957.633 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.533701 seconds old.
2018-05-21T20:02:38.027Z,1526932958.027 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.938216 seconds old.
2018-05-21T20:02:38.029Z,1526932958.029 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.930326 seconds old.
2018-05-21T20:02:38.405Z,1526932958.405 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.315753 seconds old.
2018-05-21T20:02:38.407Z,1526932958.407 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.307961 seconds old.
2018-05-21T20:03:01.968Z,1526932981.968 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T20:03:06.054Z,1526932986.054 [DataOverHttps](INFO): Sending 219 bytes from file Logs/20180520T234132/Express0355.lzma
2018-05-21T20:03:06.836Z,1526932986.836 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0355.lzma.bak
2018-05-21T20:03:06.836Z,1526932986.836 [DataOverHttps](INFO): SBD MOMSN=8288580
2018-05-21T20:03:07.577Z,1526932987.577 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T20:03:07.577Z,1526932987.577 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T20:03:07.577Z,1526932987.577 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T20:03:32.552Z,1526933012.552 [NAL9602](INFO): Powering down
2018-05-21T20:03:41.801Z,1526933021.801 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:03:41.801Z,1526933021.801 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T20:03:41.801Z,1526933021.801 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:03:41.851Z,1526933021.851 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:03:42.208Z,1526933022.208 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:03:42.209Z,1526933022.209 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T20:03:42.594Z,1526933022.594 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:03:42.595Z,1526933022.595 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:03:42.595Z,1526933022.595 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:04:51.184Z,1526933091.184 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T20:06:42.937Z,1526933202.937 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:06:42.937Z,1526933202.937 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T20:06:42.937Z,1526933202.937 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:06:42.950Z,1526933202.950 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:06:43.346Z,1526933203.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:06:43.346Z,1526933203.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T20:06:43.736Z,1526933203.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:06:43.736Z,1526933203.736 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:06:43.737Z,1526933203.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:08:07.847Z,1526933287.847 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T20:08:07.847Z,1526933287.847 [Default:CheckIn:C.Wait] Stopped
2018-05-21T20:08:07.847Z,1526933287.847 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T20:08:07.847Z,1526933287.847 [Default:CheckIn:D] Running Loop=1
2018-05-21T20:08:08.236Z,1526933288.236 [Default:CheckIn:D] Stopped
2018-05-21T20:08:08.236Z,1526933288.236 [Default:CheckIn:E] Running Loop=1
2018-05-21T20:08:08.661Z,1526933288.661 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1226.586589 min 
2018-05-21T20:08:08.662Z,1526933288.662 [Default:CheckIn:E] Stopped
2018-05-21T20:08:08.662Z,1526933288.662 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T20:08:08.662Z,1526933288.662 [Default:CheckIn] Stopped
2018-05-21T20:08:08.662Z,1526933288.662 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T20:08:08.662Z,1526933288.662 [Default:CheckIn](INFO): Running loop #120
2018-05-21T20:08:08.662Z,1526933288.662 [Default:CheckIn] Running Loop=120
2018-05-21T20:08:08.663Z,1526933288.663 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T20:08:08.663Z,1526933288.663 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T20:08:12.003Z,1526933292.003 [NAL9602](INFO): Powering up
2018-05-21T20:08:23.164Z,1526933303.164 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:08:23.964Z,1526933303.964 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T20:08:23.964Z,1526933303.964 [NAL9602] Data Fault, FailCount= 5
2018-05-21T20:08:23.964Z,1526933303.964 [NAL9602](ERROR): Data Fault
2018-05-21T20:08:24.046Z,1526933304.046 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T20:08:24.046Z,1526933304.046 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T20:08:24.367Z,1526933304.367 [NAL9602](INFO): Powering down
2018-05-21T20:08:24.438Z,1526933304.438 [CBIT](INFO): Critical error at 20180521T200824
2018-05-21T20:09:43.979Z,1526933383.979 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:09:43.979Z,1526933383.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T20:09:43.979Z,1526933383.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:09:43.992Z,1526933383.992 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:09:44.394Z,1526933384.394 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:09:44.394Z,1526933384.394 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T20:09:44.780Z,1526933384.780 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:09:44.781Z,1526933384.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:09:44.781Z,1526933384.781 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:10:24.011Z,1526933424.011 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T20:10:24.011Z,1526933424.011 [NAL9602] No Fault, FailCount= 5
2018-05-21T20:10:24.312Z,1526933424.312 [NAL9602](INFO): Powering up NAL9602
2018-05-21T20:10:35.516Z,1526933435.516 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:12:44.948Z,1526933564.948 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:12:44.948Z,1526933564.948 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-05-21T20:12:44.948Z,1526933564.948 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:12:44.977Z,1526933564.977 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:12:45.371Z,1526933565.371 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:12:45.371Z,1526933565.371 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-05-21T20:12:45.742Z,1526933565.742 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:12:45.743Z,1526933565.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:12:45.743Z,1526933565.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:13:08.945Z,1526933588.945 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T20:08:08.7Z
2018-05-21T20:13:08.945Z,1526933588.945 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T20:13:08.945Z,1526933588.945 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T20:13:13.353Z,1526933593.353 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180520T234132/Courier0357.lzma
2018-05-21T20:13:14.152Z,1526933594.152 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0357.lzma.bak
2018-05-21T20:13:14.152Z,1526933594.152 [DataOverHttps](INFO): SBD MOMSN=8288585
2018-05-21T20:13:23.272Z,1526933603.272 [DataOverHttps](INFO): Sending 303 bytes from file Logs/20180520T234132/Express0358.lzma
2018-05-21T20:13:24.072Z,1526933604.072 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0358.lzma.bak
2018-05-21T20:13:24.072Z,1526933604.072 [DataOverHttps](INFO): SBD MOMSN=8288588
2018-05-21T20:13:24.806Z,1526933604.806 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T20:13:24.806Z,1526933604.806 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T20:13:24.807Z,1526933604.807 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T20:14:51.502Z,1526933691.502 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T20:15:39.212Z,1526933739.212 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T20:15:46.053Z,1526933746.053 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:15:46.053Z,1526933746.053 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-05-21T20:15:46.053Z,1526933746.053 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:15:46.066Z,1526933746.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:15:46.470Z,1526933746.470 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:15:46.470Z,1526933746.470 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-05-21T20:15:46.856Z,1526933746.856 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:15:46.856Z,1526933746.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:15:46.857Z,1526933746.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:16:10.011Z,1526933770.011 [NAL9602](INFO): Powering down
2018-05-21T20:18:24.053Z,1526933904.053 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.383825 seconds old.
2018-05-21T20:18:24.064Z,1526933904.064 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.381197 seconds old.
2018-05-21T20:18:24.456Z,1526933904.456 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.786852 seconds old.
2018-05-21T20:18:24.478Z,1526933904.478 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.775280 seconds old.
2018-05-21T20:18:25.256Z,1526933905.256 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.396003 seconds old.
2018-05-21T20:18:25.258Z,1526933905.258 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396361 seconds old.
2018-05-21T20:18:25.261Z,1526933905.261 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T20:18:25.261Z,1526933905.261 [Default:CheckIn:C.Wait] Stopped
2018-05-21T20:18:25.261Z,1526933905.261 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T20:18:25.261Z,1526933905.261 [Default:CheckIn:D] Running Loop=1
2018-05-21T20:18:25.664Z,1526933905.664 [Default:CheckIn:D] Stopped
2018-05-21T20:18:25.664Z,1526933905.664 [Default:CheckIn:E] Running Loop=1
2018-05-21T20:18:26.067Z,1526933906.067 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1236.877083 min 
2018-05-21T20:18:26.067Z,1526933906.067 [Default:CheckIn:E] Stopped
2018-05-21T20:18:26.068Z,1526933906.068 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T20:18:26.068Z,1526933906.068 [Default:CheckIn] Stopped
2018-05-21T20:18:26.068Z,1526933906.068 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T20:18:26.068Z,1526933906.068 [Default:CheckIn](INFO): Running loop #121
2018-05-21T20:18:26.068Z,1526933906.068 [Default:CheckIn] Running Loop=121
2018-05-21T20:18:26.068Z,1526933906.068 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T20:18:26.068Z,1526933906.068 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T20:18:29.359Z,1526933909.359 [NAL9602](INFO): Powering up
2018-05-21T20:18:40.532Z,1526933920.532 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:18:46.975Z,1526933926.975 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:18:46.975Z,1526933926.975 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-05-21T20:18:46.975Z,1526933926.975 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:18:46.988Z,1526933926.988 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:18:47.390Z,1526933927.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:18:47.390Z,1526933927.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-05-21T20:18:47.769Z,1526933927.769 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:18:47.770Z,1526933927.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:18:47.770Z,1526933927.770 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:19:12.529Z,1526933952.529 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T20:19:12.610Z,1526933952.610 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T20:19:12.610Z,1526933952.610 [NAL9602] Data Fault, FailCount= 1
2018-05-21T20:19:12.610Z,1526933952.610 [NAL9602](ERROR): Data Fault
2018-05-21T20:19:12.679Z,1526933952.679 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T20:19:12.927Z,1526933952.927 [NAL9602](INFO): Powering down
2018-05-21T20:19:13.781Z,1526933953.781 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T20:19:13.781Z,1526933953.781 [NAL9602] No Fault, FailCount= 1
2018-05-21T20:19:43.096Z,1526933983.096 [NAL9602](INFO): Powering up NAL9602
2018-05-21T20:19:54.296Z,1526933994.296 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:21:48.099Z,1526934108.099 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:21:48.099Z,1526934108.099 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-05-21T20:21:48.099Z,1526934108.099 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:21:48.112Z,1526934108.112 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:21:48.510Z,1526934108.510 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:21:48.510Z,1526934108.510 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-05-21T20:21:48.903Z,1526934108.903 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:21:48.903Z,1526934108.903 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:21:48.904Z,1526934108.904 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:23:26.333Z,1526934206.333 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T20:18:26.1Z
2018-05-21T20:23:26.333Z,1526934206.333 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T20:23:26.333Z,1526934206.333 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T20:23:30.087Z,1526934210.087 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0360.lzma
2018-05-21T20:23:30.816Z,1526934210.816 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0360.lzma.bak
2018-05-21T20:23:30.816Z,1526934210.816 [DataOverHttps](INFO): SBD MOMSN=8288596
2018-05-21T20:23:40.082Z,1526934220.082 [DataOverHttps](INFO): Sending 240 bytes from file Logs/20180520T234132/Express0361.lzma
2018-05-21T20:23:40.848Z,1526934220.848 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0361.lzma.bak
2018-05-21T20:23:40.848Z,1526934220.848 [DataOverHttps](INFO): SBD MOMSN=8288598
2018-05-21T20:23:41.577Z,1526934221.577 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T20:23:41.577Z,1526934221.577 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T20:23:41.577Z,1526934221.577 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T20:23:44.760Z,1526934224.760 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T20:24:15.248Z,1526934255.248 [NAL9602](INFO): Powering down
2018-05-21T20:24:49.291Z,1526934289.291 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:24:49.291Z,1526934289.291 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-05-21T20:24:49.291Z,1526934289.291 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:24:49.304Z,1526934289.304 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:24:49.705Z,1526934289.705 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:24:49.705Z,1526934289.705 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-05-21T20:24:50.081Z,1526934290.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:24:50.081Z,1526934290.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:24:50.082Z,1526934290.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:24:51.723Z,1526934291.723 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T20:27:50.096Z,1526934470.096 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:27:50.096Z,1526934470.096 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-05-21T20:27:50.096Z,1526934470.096 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:27:50.109Z,1526934470.109 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:27:50.555Z,1526934470.555 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:27:50.555Z,1526934470.555 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-05-21T20:27:50.895Z,1526934470.895 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:27:50.896Z,1526934470.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:27:50.896Z,1526934470.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:28:41.726Z,1526934521.726 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T20:28:41.726Z,1526934521.726 [Default:CheckIn:C.Wait] Stopped
2018-05-21T20:28:41.726Z,1526934521.726 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T20:28:41.726Z,1526934521.726 [Default:CheckIn:D] Running Loop=1
2018-05-21T20:28:42.091Z,1526934522.091 [Default:CheckIn:D] Stopped
2018-05-21T20:28:42.091Z,1526934522.091 [Default:CheckIn:E] Running Loop=1
2018-05-21T20:28:42.573Z,1526934522.573 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1247.150781 min 
2018-05-21T20:28:42.573Z,1526934522.573 [Default:CheckIn:E] Stopped
2018-05-21T20:28:42.573Z,1526934522.573 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T20:28:42.573Z,1526934522.573 [Default:CheckIn] Stopped
2018-05-21T20:28:42.574Z,1526934522.574 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T20:28:42.574Z,1526934522.574 [Default:CheckIn](INFO): Running loop #122
2018-05-21T20:28:42.574Z,1526934522.574 [Default:CheckIn] Running Loop=122
2018-05-21T20:28:42.574Z,1526934522.574 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T20:28:42.574Z,1526934522.574 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T20:28:43.255Z,1526934523.255 [NAL9602](INFO): Powering up
2018-05-21T20:28:54.447Z,1526934534.447 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:28:55.248Z,1526934535.248 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T20:28:55.248Z,1526934535.248 [NAL9602] Data Fault, FailCount= 2
2018-05-21T20:28:55.248Z,1526934535.248 [NAL9602](ERROR): Data Fault
2018-05-21T20:28:55.327Z,1526934535.327 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T20:28:55.643Z,1526934535.643 [NAL9602](INFO): Powering down
2018-05-21T20:28:56.534Z,1526934536.534 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T20:28:56.534Z,1526934536.534 [NAL9602] No Fault, FailCount= 2
2018-05-21T20:29:26.043Z,1526934566.043 [NAL9602](INFO): Powering up NAL9602
2018-05-21T20:29:37.244Z,1526934577.244 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:30:51.128Z,1526934651.128 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:30:51.128Z,1526934651.128 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-05-21T20:30:51.128Z,1526934651.128 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:30:51.141Z,1526934651.141 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:30:51.565Z,1526934651.565 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:30:51.565Z,1526934651.565 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-05-21T20:30:51.983Z,1526934651.983 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:30:51.984Z,1526934651.984 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:30:51.984Z,1526934651.984 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:33:42.872Z,1526934822.872 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T20:28:42.6Z
2018-05-21T20:33:42.872Z,1526934822.872 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T20:33:42.872Z,1526934822.872 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T20:33:47.394Z,1526934827.394 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0363.lzma
2018-05-21T20:33:48.192Z,1526934828.192 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0363.lzma.bak
2018-05-21T20:33:48.192Z,1526934828.192 [DataOverHttps](INFO): SBD MOMSN=8288603
2018-05-21T20:33:52.232Z,1526934832.232 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:33:52.232Z,1526934832.232 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-05-21T20:33:52.232Z,1526934832.232 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:33:52.244Z,1526934832.244 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:33:52.399Z,1526934832.399 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:33:52.399Z,1526934832.399 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-05-21T20:33:52.721Z,1526934832.721 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:33:52.722Z,1526934832.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:33:52.723Z,1526934832.723 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:33:57.046Z,1526934837.046 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180520T234132/Express0364.lzma
2018-05-21T20:33:57.848Z,1526934837.848 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0364.lzma.bak
2018-05-21T20:33:57.848Z,1526934837.848 [DataOverHttps](INFO): SBD MOMSN=8288605
2018-05-21T20:33:58.579Z,1526934838.579 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T20:33:58.580Z,1526934838.580 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T20:33:58.580Z,1526934838.580 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T20:34:41.220Z,1526934881.220 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T20:34:52.103Z,1526934892.103 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T20:35:11.987Z,1526934911.987 [NAL9602](INFO): Powering down
2018-05-21T20:36:29.182Z,1526934989.182 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-05-21T20:36:52.832Z,1526935012.832 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:36:52.832Z,1526935012.832 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-05-21T20:36:52.832Z,1526935012.832 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:36:52.845Z,1526935012.845 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:36:53.240Z,1526935013.240 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:36:53.240Z,1526935013.240 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-05-21T20:36:53.639Z,1526935013.639 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:36:53.640Z,1526935013.640 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:36:53.640Z,1526935013.640 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:37:29.582Z,1526935049.582 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-05-21T20:38:03.296Z,1526935083.296 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.112808
2018-05-21T20:38:59.033Z,1526935139.033 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T20:38:59.033Z,1526935139.033 [Default:CheckIn:C.Wait] Stopped
2018-05-21T20:38:59.033Z,1526935139.033 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T20:38:59.033Z,1526935139.033 [Default:CheckIn:D] Running Loop=1
2018-05-21T20:38:59.433Z,1526935139.433 [Default:CheckIn:D] Stopped
2018-05-21T20:38:59.433Z,1526935139.433 [Default:CheckIn:E] Running Loop=1
2018-05-21T20:38:59.836Z,1526935139.836 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1257.439844 min 
2018-05-21T20:38:59.836Z,1526935139.836 [Default:CheckIn:E] Stopped
2018-05-21T20:38:59.836Z,1526935139.836 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T20:38:59.837Z,1526935139.837 [Default:CheckIn] Stopped
2018-05-21T20:38:59.837Z,1526935139.837 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T20:38:59.837Z,1526935139.837 [Default:CheckIn](INFO): Running loop #123
2018-05-21T20:38:59.837Z,1526935139.837 [Default:CheckIn] Running Loop=123
2018-05-21T20:38:59.837Z,1526935139.837 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T20:38:59.837Z,1526935139.837 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T20:39:00.591Z,1526935140.591 [NAL9602](INFO): Powering up
2018-05-21T20:39:07.501Z,1526935147.501 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002576
2018-05-21T20:39:11.504Z,1526935151.504 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:39:43.504Z,1526935183.504 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T20:39:43.594Z,1526935183.594 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T20:39:43.594Z,1526935183.594 [NAL9602] Data Fault, FailCount= 3
2018-05-21T20:39:43.594Z,1526935183.594 [NAL9602](ERROR): Data Fault
2018-05-21T20:39:43.714Z,1526935183.714 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T20:39:43.903Z,1526935183.903 [NAL9602](INFO): Powering down
2018-05-21T20:39:44.761Z,1526935184.761 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T20:39:44.761Z,1526935184.761 [NAL9602] No Fault, FailCount= 3
2018-05-21T20:39:53.973Z,1526935193.973 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:39:53.973Z,1526935193.973 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-05-21T20:39:53.973Z,1526935193.973 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:39:53.986Z,1526935193.986 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:39:54.388Z,1526935194.388 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:39:54.388Z,1526935194.388 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-05-21T20:39:54.737Z,1526935194.737 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:39:54.737Z,1526935194.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:39:54.738Z,1526935194.738 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:40:14.288Z,1526935214.288 [NAL9602](INFO): Powering up NAL9602
2018-05-21T20:40:25.483Z,1526935225.483 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:40:26.283Z,1526935226.283 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T20:40:26.284Z,1526935226.284 [NAL9602] Data Fault, FailCount= 4
2018-05-21T20:40:26.284Z,1526935226.284 [NAL9602](ERROR): Data Fault
2018-05-21T20:40:26.376Z,1526935226.376 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T20:40:26.683Z,1526935226.683 [NAL9602](INFO): Powering down
2018-05-21T20:40:27.548Z,1526935227.548 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T20:40:27.548Z,1526935227.548 [NAL9602] No Fault, FailCount= 4
2018-05-21T20:40:54.735Z,1526935254.735 [BPC1](INFO): Failure count cleared after critical for BPC1
2018-05-21T20:40:57.084Z,1526935257.084 [NAL9602](INFO): Powering up NAL9602
2018-05-21T20:41:08.068Z,1526935268.068 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:42:54.931Z,1526935374.931 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:42:54.931Z,1526935374.931 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-05-21T20:42:54.932Z,1526935374.932 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:42:54.944Z,1526935374.944 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:42:55.334Z,1526935375.334 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:42:55.334Z,1526935375.334 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-05-21T20:42:55.710Z,1526935375.710 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:42:55.711Z,1526935375.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:42:55.711Z,1526935375.711 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:43:59.953Z,1526935439.953 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T20:38:59.8Z
2018-05-21T20:43:59.953Z,1526935439.953 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T20:43:59.954Z,1526935439.954 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T20:44:07.342Z,1526935447.342 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180520T234132/Courier0366.lzma
2018-05-21T20:44:09.740Z,1526935449.740 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0366.lzma.bak
2018-05-21T20:44:09.740Z,1526935449.740 [DataOverHttps](INFO): SBD MOMSN=8288611
2018-05-21T20:44:14.730Z,1526935454.730 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T20:44:21.118Z,1526935461.118 [DataOverHttps](INFO): Sending 256 bytes from file Logs/20180520T234132/Express0367.lzma
2018-05-21T20:44:22.316Z,1526935462.316 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0367.lzma.bak
2018-05-21T20:44:22.316Z,1526935462.316 [DataOverHttps](INFO): SBD MOMSN=8288613
2018-05-21T20:44:23.071Z,1526935463.071 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T20:44:23.071Z,1526935463.071 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T20:44:23.071Z,1526935463.071 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T20:44:45.196Z,1526935485.196 [NAL9602](INFO): Powering down
2018-05-21T20:44:52.473Z,1526935492.473 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T20:45:55.744Z,1526935555.744 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:45:55.744Z,1526935555.744 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-05-21T20:45:55.744Z,1526935555.744 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:45:55.779Z,1526935555.779 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:45:56.217Z,1526935556.217 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:45:56.217Z,1526935556.217 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-05-21T20:45:56.549Z,1526935556.549 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:45:56.550Z,1526935556.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:45:56.550Z,1526935556.550 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:48:56.615Z,1526935736.615 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:48:56.615Z,1526935736.615 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-05-21T20:48:56.615Z,1526935736.615 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:48:56.668Z,1526935736.668 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:48:57.028Z,1526935737.028 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:48:57.028Z,1526935737.028 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-05-21T20:48:57.415Z,1526935737.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:48:57.416Z,1526935737.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:48:57.416Z,1526935737.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:49:23.407Z,1526935763.407 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T20:49:23.407Z,1526935763.407 [Default:CheckIn:C.Wait] Stopped
2018-05-21T20:49:23.407Z,1526935763.407 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T20:49:23.407Z,1526935763.407 [Default:CheckIn:D] Running Loop=1
2018-05-21T20:49:23.824Z,1526935763.824 [Default:CheckIn:D] Stopped
2018-05-21T20:49:23.824Z,1526935763.824 [Default:CheckIn:E] Running Loop=1
2018-05-21T20:49:24.216Z,1526935764.216 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1267.846354 min 
2018-05-21T20:49:24.216Z,1526935764.216 [Default:CheckIn:E] Stopped
2018-05-21T20:49:24.217Z,1526935764.217 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T20:49:24.217Z,1526935764.217 [Default:CheckIn] Stopped
2018-05-21T20:49:24.217Z,1526935764.217 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T20:49:24.217Z,1526935764.217 [Default:CheckIn](INFO): Running loop #124
2018-05-21T20:49:24.217Z,1526935764.217 [Default:CheckIn] Running Loop=124
2018-05-21T20:49:24.217Z,1526935764.217 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T20:49:24.217Z,1526935764.217 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T20:49:27.587Z,1526935767.587 [NAL9602](INFO): Powering up
2018-05-21T20:49:38.736Z,1526935778.736 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:50:10.732Z,1526935810.732 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T20:50:10.807Z,1526935810.807 [NAL9602](FAULT): received: 
+CSQ:0

OK56, 2, 0, 0, 0

OK
2018-05-21T20:50:10.807Z,1526935810.807 [NAL9602] Data Fault, FailCount= 5
2018-05-21T20:50:10.808Z,1526935810.808 [NAL9602](ERROR): Data Fault
2018-05-21T20:50:10.887Z,1526935810.887 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T20:50:10.888Z,1526935810.888 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-05-21T20:50:11.139Z,1526935811.139 [NAL9602](INFO): Powering down
2018-05-21T20:50:11.235Z,1526935811.235 [CBIT](INFO): Critical error at 20180521T205010
2018-05-21T20:51:57.761Z,1526935917.761 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:51:57.761Z,1526935917.761 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-05-21T20:51:57.761Z,1526935917.761 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:51:57.799Z,1526935917.799 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:51:58.178Z,1526935918.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:51:58.206Z,1526935918.206 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-05-21T20:51:58.566Z,1526935918.566 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:51:58.567Z,1526935918.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:51:58.567Z,1526935918.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:52:10.989Z,1526935930.989 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T20:52:10.989Z,1526935930.989 [NAL9602] No Fault, FailCount= 5
2018-05-21T20:52:11.319Z,1526935931.319 [NAL9602](INFO): Powering up NAL9602
2018-05-21T20:52:22.520Z,1526935942.520 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:52:23.324Z,1526935943.324 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T20:52:23.324Z,1526935943.324 [NAL9602] Data Fault, FailCount= 1
2018-05-21T20:52:23.324Z,1526935943.324 [NAL9602](ERROR): Data Fault
2018-05-21T20:52:23.415Z,1526935943.415 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T20:52:23.719Z,1526935943.719 [NAL9602](INFO): Powering down
2018-05-21T20:52:24.592Z,1526935944.592 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T20:52:24.592Z,1526935944.592 [NAL9602] No Fault, FailCount= 1
2018-05-21T20:52:53.728Z,1526935973.728 [NAL9602](INFO): Powering up NAL9602
2018-05-21T20:53:04.527Z,1526935984.527 [NAL9602](INFO): NAL9602 initialized
2018-05-21T20:53:40.694Z,1526936020.694 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T20:53:40.694Z,1526936020.694 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T20:53:55.901Z,1526936035.901 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T20:53:55.901Z,1526936035.901 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T20:54:24.336Z,1526936064.336 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T20:49:24.2Z
2018-05-21T20:54:24.336Z,1526936064.336 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T20:54:24.336Z,1526936064.336 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T20:54:29.829Z,1526936069.829 [DataOverHttps](INFO): Sending 70 bytes from file Logs/20180520T234132/Courier0369.lzma
2018-05-21T20:54:30.628Z,1526936070.628 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0369.lzma.bak
2018-05-21T20:54:30.628Z,1526936070.628 [DataOverHttps](INFO): SBD MOMSN=8288619
2018-05-21T20:54:40.517Z,1526936080.517 [NAL9602](INFO): SBD MO Status=2, MOMSN=5856, MT Status=2, MTMSN=0
2018-05-21T20:54:40.517Z,1526936080.517 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-05-21T20:54:46.075Z,1526936086.075 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-05-21T20:54:46.578Z,1526936086.578 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180520T234132/Express0370.lzma
2018-05-21T20:54:47.776Z,1526936087.776 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0370.lzma.bak
2018-05-21T20:54:47.776Z,1526936087.776 [DataOverHttps](INFO): SBD MOMSN=8288622
2018-05-21T20:54:48.872Z,1526936088.872 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T20:54:48.872Z,1526936088.872 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T20:54:48.872Z,1526936088.872 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T20:54:54.178Z,1526936094.178 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T20:54:58.696Z,1526936098.696 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:54:58.696Z,1526936098.696 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-05-21T20:54:58.697Z,1526936098.697 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:54:58.720Z,1526936098.720 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:54:59.078Z,1526936099.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T20:54:59.078Z,1526936099.078 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-05-21T20:54:59.478Z,1526936099.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T20:54:59.478Z,1526936099.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T20:54:59.479Z,1526936099.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T20:55:16.591Z,1526936116.591 [NAL9602](INFO): Powering down
2018-05-21T20:57:59.627Z,1526936279.627 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T20:57:59.627Z,1526936279.627 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-05-21T20:57:59.627Z,1526936279.627 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T20:57:59.640Z,1526936279.640 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:57:59.640Z,1526936279.640 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T20:59:49.399Z,1526936389.399 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T20:59:49.399Z,1526936389.399 [Default:CheckIn:C.Wait] Stopped
2018-05-21T20:59:49.399Z,1526936389.399 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T20:59:49.400Z,1526936389.400 [Default:CheckIn:D] Running Loop=1
2018-05-21T20:59:49.808Z,1526936389.808 [Default:CheckIn:D] Stopped
2018-05-21T20:59:49.808Z,1526936389.808 [Default:CheckIn:E] Running Loop=1
2018-05-21T20:59:52.908Z,1526936392.908 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1278.279427 min 
2018-05-21T20:59:52.908Z,1526936392.908 [Default:CheckIn:E] Stopped
2018-05-21T20:59:52.908Z,1526936392.908 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T20:59:52.908Z,1526936392.908 [Default:CheckIn] Stopped
2018-05-21T20:59:52.908Z,1526936392.908 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T20:59:52.909Z,1526936392.909 [Default:CheckIn](INFO): Running loop #125
2018-05-21T20:59:52.909Z,1526936392.909 [Default:CheckIn] Running Loop=125
2018-05-21T20:59:52.909Z,1526936392.909 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T20:59:52.909Z,1526936392.909 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T20:59:53.339Z,1526936393.339 [NAL9602](INFO): Powering up
2018-05-21T21:00:04.532Z,1526936404.532 [NAL9602](INFO): NAL9602 initialized
2018-05-21T21:00:36.532Z,1526936436.532 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2018-05-21T21:00:37.046Z,1526936437.046 [NAL9602](FAULT): received: 
2018-05-21T21:00:37.046Z,1526936437.046 [NAL9602] Data Fault, FailCount= 2
2018-05-21T21:00:37.046Z,1526936437.046 [NAL9602](ERROR): Data Fault
2018-05-21T21:00:37.118Z,1526936437.118 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T21:00:37.175Z,1526936437.175 [NAL9602](INFO): Powering down
2018-05-21T21:00:38.002Z,1526936438.002 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T21:00:38.002Z,1526936438.002 [NAL9602] No Fault, FailCount= 2
2018-05-21T21:01:07.531Z,1526936467.531 [NAL9602](INFO): Powering up NAL9602
2018-05-21T21:01:18.731Z,1526936478.731 [NAL9602](INFO): NAL9602 initialized
2018-05-21T21:04:49.413Z,1526936689.413 [NAL9602](INFO): SBD MO Status=0, MOMSN=5856, MT Status=0, MTMSN=0
2018-05-21T21:04:49.413Z,1526936689.413 [NAL9602](INFO): No messages in MT queue
2018-05-21T21:04:50.216Z,1526936690.216 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-05-21T21:04:50.216Z,1526936690.216 [NAL9602] Data Fault, FailCount= 1
2018-05-21T21:04:50.216Z,1526936690.216 [NAL9602](ERROR): Data Fault
2018-05-21T21:04:50.309Z,1526936690.309 [CBIT](ERROR): Data Fault in component: NAL9602
2018-05-21T21:04:50.612Z,1526936690.612 [NAL9602](INFO): Powering down
2018-05-21T21:04:53.767Z,1526936693.767 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-05-21T20:59:52.9Z
2018-05-21T21:04:53.767Z,1526936693.767 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T21:04:53.767Z,1526936693.767 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T21:04:53.918Z,1526936693.918 [CBIT](INFO): Clearing failed state for component NAL9602
2018-05-21T21:04:53.918Z,1526936693.918 [NAL9602] No Fault, FailCount= 1
2018-05-21T21:04:54.331Z,1526936694.331 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0372.lzma
2018-05-21T21:04:54.391Z,1526936694.391 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T21:04:54.988Z,1526936694.988 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0372.lzma.bak
2018-05-21T21:04:54.988Z,1526936694.988 [DataOverHttps](INFO): SBD MOMSN=8288628
2018-05-21T21:05:04.192Z,1526936704.192 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20180520T234132/Express0373.lzma
2018-05-21T21:05:04.984Z,1526936704.984 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0373.lzma.bak
2018-05-21T21:05:04.984Z,1526936704.984 [DataOverHttps](INFO): SBD MOMSN=8288630
2018-05-21T21:05:05.707Z,1526936705.707 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T21:05:05.707Z,1526936705.707 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T21:05:05.707Z,1526936705.707 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T21:05:20.615Z,1526936720.615 [NAL9602](INFO): Powering up NAL9602
2018-05-21T21:05:31.804Z,1526936731.804 [NAL9602](INFO): NAL9602 initialized
2018-05-21T21:06:03.003Z,1526936763.003 [NAL9602](INFO): Powering down
2018-05-21T21:10:05.880Z,1526937005.880 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T21:10:05.880Z,1526937005.880 [Default:CheckIn:C.Wait] Stopped
2018-05-21T21:10:05.880Z,1526937005.880 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T21:10:05.880Z,1526937005.880 [Default:CheckIn:D] Running Loop=1
2018-05-21T21:10:06.273Z,1526937006.273 [Default:CheckIn:D] Stopped
2018-05-21T21:10:06.273Z,1526937006.273 [Default:CheckIn:E] Running Loop=1
2018-05-21T21:10:06.676Z,1526937006.676 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1288.553906 min 
2018-05-21T21:10:06.677Z,1526937006.677 [Default:CheckIn:E] Stopped
2018-05-21T21:10:06.677Z,1526937006.677 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T21:10:06.677Z,1526937006.677 [Default:CheckIn] Stopped
2018-05-21T21:10:06.677Z,1526937006.677 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T21:10:06.677Z,1526937006.677 [Default:CheckIn](INFO): Running loop #126
2018-05-21T21:10:06.677Z,1526937006.677 [Default:CheckIn] Running Loop=126
2018-05-21T21:10:06.677Z,1526937006.677 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T21:10:06.677Z,1526937006.677 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T21:10:10.210Z,1526937010.210 [NAL9602](INFO): Powering up
2018-05-21T21:10:21.108Z,1526937021.108 [NAL9602](INFO): NAL9602 initialized
2018-05-21T21:12:50.865Z,1526937170.865 [NAL9602](INFO): SBD MO Status=0, MOMSN=5857, MT Status=0, MTMSN=0
2018-05-21T21:12:50.865Z,1526937170.865 [NAL9602](INFO): No messages in MT queue
2018-05-21T21:12:50.865Z,1526937170.865 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2018-05-21T21:12:52.068Z,1526937172.068 [NAL9602](INFO): GPS fix at 20180521T211247: (36.802525, -121.787036)
2018-05-21T21:12:52.149Z,1526937172.149 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T21:12:52.149Z,1526937172.149 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T21:12:58.250Z,1526937178.250 [DataOverHttps](INFO): Sending 212 bytes from file Logs/20180520T234132/Courier0375.lzma
2018-05-21T21:12:59.048Z,1526937179.048 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0375.lzma.bak
2018-05-21T21:12:59.048Z,1526937179.048 [DataOverHttps](INFO): SBD MOMSN=8288638
2018-05-21T21:12:59.796Z,1526937179.796 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:12:59.797Z,1526937179.797 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-05-21T21:12:59.906Z,1526937179.906 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:12:59.907Z,1526937179.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:12:59.907Z,1526937179.907 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:13:03.010Z,1526937183.010 [DeadReckonWithRespectToSeafloor](INFO): Failure count cleared after critical for DeadReckonWithRespectToSeafloor
2018-05-21T21:13:13.506Z,1526937193.506 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180520T234132/Express0376.lzma
2018-05-21T21:13:14.304Z,1526937194.304 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0376.lzma.bak
2018-05-21T21:13:14.304Z,1526937194.304 [DataOverHttps](INFO): SBD MOMSN=8288641
2018-05-21T21:13:15.107Z,1526937195.107 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T21:13:15.107Z,1526937195.107 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T21:13:15.107Z,1526937195.107 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T21:13:27.935Z,1526937207.935 [NAL9602](INFO): Powering down
2018-05-21T21:14:54.452Z,1526937294.452 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T21:16:00.227Z,1526937360.227 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:16:00.227Z,1526937360.227 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T21:16:00.227Z,1526937360.227 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:16:00.239Z,1526937360.239 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:16:00.645Z,1526937360.645 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:16:00.646Z,1526937360.646 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T21:16:01.032Z,1526937361.032 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:16:01.033Z,1526937361.033 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:16:01.033Z,1526937361.033 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:18:15.457Z,1526937495.457 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T21:18:15.457Z,1526937495.457 [Default:CheckIn:C.Wait] Stopped
2018-05-21T21:18:15.457Z,1526937495.457 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T21:18:15.457Z,1526937495.457 [Default:CheckIn:D] Running Loop=1
2018-05-21T21:18:15.857Z,1526937495.857 [Default:CheckIn:D] Stopped
2018-05-21T21:18:15.857Z,1526937495.857 [Default:CheckIn:E] Running Loop=1
2018-05-21T21:18:16.261Z,1526937496.261 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1296.713542 min 
2018-05-21T21:18:16.261Z,1526937496.261 [Default:CheckIn:E] Stopped
2018-05-21T21:18:16.261Z,1526937496.261 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T21:18:16.262Z,1526937496.262 [Default:CheckIn] Stopped
2018-05-21T21:18:16.262Z,1526937496.262 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T21:18:16.262Z,1526937496.262 [Default:CheckIn](INFO): Running loop #127
2018-05-21T21:18:16.262Z,1526937496.262 [Default:CheckIn] Running Loop=127
2018-05-21T21:18:16.262Z,1526937496.262 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T21:18:16.262Z,1526937496.262 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T21:18:19.456Z,1526937499.456 [NAL9602](INFO): Powering up
2018-05-21T21:18:30.636Z,1526937510.636 [NAL9602](INFO): NAL9602 initialized
2018-05-21T21:19:01.075Z,1526937541.075 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:19:01.075Z,1526937541.075 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T21:19:01.075Z,1526937541.075 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:19:01.129Z,1526937541.129 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:19:01.488Z,1526937541.488 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:19:01.489Z,1526937541.489 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T21:19:01.885Z,1526937541.885 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:19:01.886Z,1526937541.886 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:19:01.886Z,1526937541.886 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:19:19.411Z,1526937559.411 [NAL9602](INFO): SBD MO Status=0, MOMSN=5858, MT Status=0, MTMSN=0
2018-05-21T21:19:19.411Z,1526937559.411 [NAL9602](INFO): No messages in MT queue
2018-05-21T21:19:55.915Z,1526937595.915 [NAL9602](INFO): GPS fix at 20180521T211951: (36.802692, -121.786931)
2018-05-21T21:19:55.974Z,1526937595.974 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T21:19:55.974Z,1526937595.974 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T21:20:00.317Z,1526937600.317 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180520T234132/Courier0378.lzma
2018-05-21T21:20:01.096Z,1526937601.096 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0378.lzma.bak
2018-05-21T21:20:01.097Z,1526937601.097 [DataOverHttps](IMPORTANT): SBD MOMSN=8288646, MTMSN=20180521T211957
2018-05-21T21:20:05.923Z,1526937605.923 [DataOverHttps](INFO): Received command:ibit
2018-05-21T21:20:05.947Z,1526937605.947 [CommandLine](IMPORTANT): got command ibit
2018-05-21T21:20:06.052Z,1526937606.052 [IBIT](IMPORTANT): Beginning Initiated BIT
2018-05-21T21:20:06.052Z,1526937606.052 [IBIT](IMPORTANT): Beginning control surface checks.
2018-05-21T21:20:06.067Z,1526937606.067 [CBIT](IMPORTANT): Beginning ground fault scan
2018-05-21T21:20:07.623Z,1526937607.623 [NAL9602](INFO): GPS fix at 20180521T212002: (36.802703, -121.786923)
2018-05-21T21:20:11.265Z,1526937611.265 [DataOverHttps](INFO): Sending 123 bytes from file Logs/20180520T234132/Express0379.lzma
2018-05-21T21:20:12.067Z,1526937612.067 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0379.lzma.bak
2018-05-21T21:20:12.068Z,1526937612.068 [DataOverHttps](INFO): SBD MOMSN=8288650
2018-05-21T21:20:12.883Z,1526937612.883 [NAL9602](INFO): GPS fix at 20180521T212008: (36.802728, -121.786912)
2018-05-21T21:20:21.368Z,1526937621.368 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180520T234132/Courier0381.lzma
2018-05-21T21:20:21.375Z,1526937621.375 [NAL9602](INFO): GPS fix at 20180521T212016: (36.802745, -121.786908)
2018-05-21T21:20:22.168Z,1526937622.168 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0381.lzma.bak
2018-05-21T21:20:22.168Z,1526937622.168 [DataOverHttps](INFO): SBD MOMSN=8288653
2018-05-21T21:20:26.553Z,1526937626.553 [NAL9602](INFO): GPS fix at 20180521T212022: (36.802740, -121.786914)
2018-05-21T21:20:28.278Z,1526937628.278 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.121359
CHAN A1 (24V): -0.016284
CHAN A2 (12V): 4.697929
CHAN A3 (5V): -0.001304
CHAN B0 (3.3V): -0.000327
CHAN B1 (3.15aV): -0.000201
CHAN B2 (3.15bV): 0.000045
CHAN B3 (GND): -0.000088
OPEN: -0.000438
Full Scale Calc: 4.765 mA, -1.589 mA
2018-05-21T21:20:31.671Z,1526937631.671 [DataOverHttps](INFO): Sending 246 bytes from file Logs/20180520T234132/Express0382.lzma
2018-05-21T21:20:31.705Z,1526937631.705 [NAL9602](INFO): GPS fix at 20180521T212026: (36.802736, -121.786920)
2018-05-21T21:20:32.468Z,1526937632.468 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0382.lzma.bak
2018-05-21T21:20:32.468Z,1526937632.468 [DataOverHttps](INFO): SBD MOMSN=8288655
2018-05-21T21:20:37.731Z,1526937637.731 [NAL9602](INFO): GPS fix at 20180521T212032: (36.802719, -121.786933)
2018-05-21T21:20:43.968Z,1526937643.968 [NAL9602](INFO): GPS fix at 20180521T212039: (36.802701, -121.786943)
2018-05-21T21:20:49.360Z,1526937649.360 [NAL9602](INFO): GPS fix at 20180521T212044: (36.802538, -121.787016)
2018-05-21T21:20:53.969Z,1526937653.969 [IBIT](IMPORTANT): Communications Status:
Fix Status: 1
Iridium Signal Strength: 3
Latitude: 36.802536 Longitude: -121.787018
2018-05-21T21:20:54.442Z,1526937654.442 [IBIT](IMPORTANT): Battery Status:
Battery Charge (AH): 0.000000
Voltage: 0.000000
2018-05-21T21:20:54.443Z,1526937654.443 [IBIT](IMPORTANT): batteryCapacityThreshold: 5.000000 Ah
2018-05-21T21:20:54.443Z,1526937654.443 [IBIT](IMPORTANT): batteryVoltageThreshold: 13.500000 V
2018-05-21T21:20:54.788Z,1526937654.788 [NAL9602](INFO): GPS fix at 20180521T212050: (36.802507, -121.787034)
2018-05-21T21:20:54.865Z,1526937654.865 [IBIT](IMPORTANT): bitHumidityThreshold: 55.000000 %
2018-05-21T21:20:54.865Z,1526937654.865 [IBIT](IMPORTANT): bitPressureThreshold: 0.750000 psi
2018-05-21T21:20:54.866Z,1526937654.866 [IBIT](IMPORTANT): Pressure:9.537331 PSI
2018-05-21T21:20:54.870Z,1526937654.870 [IBIT](IMPORTANT): Humidity:14.119154 %
2018-05-21T21:20:55.281Z,1526937655.281 [IBIT](IMPORTANT): surfaceThreshold: 1.000000 m
2018-05-21T21:20:55.281Z,1526937655.281 [IBIT](IMPORTANT): buoyancyNeutral: 315.000000 cc
2018-05-21T21:20:55.282Z,1526937655.282 [IBIT](IMPORTANT): massDefault: -0.075000 cm
2018-05-21T21:20:55.320Z,1526937655.320 [IBIT](IMPORTANT): stopDepth: 205.000000 m
2018-05-21T21:20:55.320Z,1526937655.320 [IBIT](IMPORTANT): abortDepth: 250.000000 m
2018-05-21T21:20:55.320Z,1526937655.320 [IBIT](IMPORTANT): IBIT PASSED
2018-05-21T21:20:55.777Z,1526937655.777 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T21:20:55.777Z,1526937655.777 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T21:20:55.777Z,1526937655.777 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T21:21:29.170Z,1526937689.170 [NAL9602](INFO): Powering down
2018-05-21T21:22:03.594Z,1526937723.594 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:22:03.594Z,1526937723.594 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T21:22:03.595Z,1526937723.595 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:22:03.615Z,1526937723.615 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:22:03.733Z,1526937723.733 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:22:03.733Z,1526937723.733 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T21:22:04.068Z,1526937724.068 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:22:04.068Z,1526937724.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:22:04.068Z,1526937724.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:24:54.484Z,1526937894.484 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T21:25:04.215Z,1526937904.215 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:25:04.215Z,1526937904.215 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T21:25:04.215Z,1526937904.215 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:25:04.248Z,1526937904.248 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:25:04.594Z,1526937904.594 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:25:04.594Z,1526937904.594 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T21:25:04.946Z,1526937904.946 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:25:04.947Z,1526937904.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:25:04.947Z,1526937904.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:25:58.952Z,1526937958.952 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T21:25:58.953Z,1526937958.953 [Default:CheckIn:C.Wait] Stopped
2018-05-21T21:25:58.953Z,1526937958.953 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T21:25:58.953Z,1526937958.953 [Default:CheckIn:D] Running Loop=1
2018-05-21T21:25:59.351Z,1526937959.351 [Default:CheckIn:D] Stopped
2018-05-21T21:25:59.351Z,1526937959.351 [Default:CheckIn:E] Running Loop=1
2018-05-21T21:25:59.758Z,1526937959.758 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1304.438542 min 
2018-05-21T21:25:59.758Z,1526937959.758 [Default:CheckIn:E] Stopped
2018-05-21T21:25:59.758Z,1526937959.758 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T21:25:59.758Z,1526937959.758 [Default:CheckIn] Stopped
2018-05-21T21:25:59.758Z,1526937959.758 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T21:25:59.759Z,1526937959.759 [Default:CheckIn](INFO): Running loop #128
2018-05-21T21:25:59.759Z,1526937959.759 [Default:CheckIn] Running Loop=128
2018-05-21T21:25:59.759Z,1526937959.759 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T21:25:59.759Z,1526937959.759 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T21:26:00.503Z,1526937960.503 [NAL9602](INFO): Powering up
2018-05-21T21:26:11.684Z,1526937971.684 [NAL9602](INFO): NAL9602 initialized
2018-05-21T21:26:28.092Z,1526937988.092 [NAL9602](INFO): SBD MO Status=0, MOMSN=5859, MT Status=0, MTMSN=0
2018-05-21T21:26:28.092Z,1526937988.092 [NAL9602](INFO): No messages in MT queue
2018-05-21T21:27:06.891Z,1526938026.891 [NAL9602](INFO): GPS fix at 20180521T212702: (36.804152, -121.785923)
2018-05-21T21:27:06.955Z,1526938026.955 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T21:27:06.955Z,1526938026.955 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T21:27:11.330Z,1526938031.330 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180520T234132/Courier0384.lzma
2018-05-21T21:27:12.112Z,1526938032.112 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0384.lzma.bak
2018-05-21T21:27:12.112Z,1526938032.112 [DataOverHttps](INFO): SBD MOMSN=8288663
2018-05-21T21:27:20.962Z,1526938040.962 [DataOverHttps](INFO): Sending 623 bytes from file Logs/20180520T234132/Express0385.lzma
2018-05-21T21:27:21.720Z,1526938041.720 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0385.lzma.bak
2018-05-21T21:27:21.720Z,1526938041.720 [DataOverHttps](INFO): SBD MOMSN=8288666
2018-05-21T21:27:22.455Z,1526938042.455 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T21:27:22.456Z,1526938042.456 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T21:27:22.456Z,1526938042.456 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T21:27:41.483Z,1526938061.483 [NAL9602](INFO): Powering down
2018-05-21T21:28:05.131Z,1526938085.131 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:28:05.131Z,1526938085.131 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T21:28:05.131Z,1526938085.131 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:28:05.144Z,1526938085.144 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:28:05.536Z,1526938085.536 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:28:05.536Z,1526938085.536 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T21:28:05.931Z,1526938085.931 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:28:05.931Z,1526938085.931 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:28:05.932Z,1526938085.932 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:31:06.322Z,1526938266.322 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:31:06.322Z,1526938266.322 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T21:31:06.323Z,1526938266.323 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:31:06.335Z,1526938266.335 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:31:06.746Z,1526938266.746 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:31:06.746Z,1526938266.746 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T21:31:07.120Z,1526938267.120 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:31:07.121Z,1526938267.121 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:31:07.121Z,1526938267.121 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:32:22.877Z,1526938342.877 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T21:32:22.877Z,1526938342.877 [Default:CheckIn:C.Wait] Stopped
2018-05-21T21:32:22.877Z,1526938342.877 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T21:32:22.877Z,1526938342.877 [Default:CheckIn:D] Running Loop=1
2018-05-21T21:32:23.282Z,1526938343.282 [Default:CheckIn:D] Stopped
2018-05-21T21:32:23.282Z,1526938343.282 [Default:CheckIn:E] Running Loop=1
2018-05-21T21:32:23.682Z,1526938343.682 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1310.837370 min 
2018-05-21T21:32:23.682Z,1526938343.682 [Default:CheckIn:E] Stopped
2018-05-21T21:32:23.682Z,1526938343.682 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T21:32:23.683Z,1526938343.683 [Default:CheckIn] Stopped
2018-05-21T21:32:23.683Z,1526938343.683 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T21:32:23.683Z,1526938343.683 [Default:CheckIn](INFO): Running loop #129
2018-05-21T21:32:23.683Z,1526938343.683 [Default:CheckIn] Running Loop=129
2018-05-21T21:32:23.683Z,1526938343.683 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T21:32:23.683Z,1526938343.683 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T21:32:27.146Z,1526938347.146 [NAL9602](INFO): Powering up
2018-05-21T21:32:38.052Z,1526938358.052 [NAL9602](INFO): NAL9602 initialized
2018-05-21T21:32:55.257Z,1526938375.257 [NAL9602](INFO): SBD MO Status=0, MOMSN=5860, MT Status=0, MTMSN=0
2018-05-21T21:32:55.257Z,1526938375.257 [NAL9602](INFO): No messages in MT queue
2018-05-21T21:34:07.297Z,1526938447.297 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:34:07.297Z,1526938447.297 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-05-21T21:34:07.297Z,1526938447.297 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:34:07.310Z,1526938447.310 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:34:07.761Z,1526938447.761 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:34:07.761Z,1526938447.761 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-05-21T21:34:08.087Z,1526938448.087 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:34:08.087Z,1526938448.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:34:08.088Z,1526938448.088 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:34:54.521Z,1526938494.521 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T21:37:08.159Z,1526938628.159 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:37:08.159Z,1526938628.159 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-05-21T21:37:08.159Z,1526938628.159 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:37:08.172Z,1526938628.172 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:37:08.577Z,1526938628.577 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:37:08.577Z,1526938628.577 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-05-21T21:37:08.963Z,1526938628.963 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:37:08.963Z,1526938628.963 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:37:08.963Z,1526938628.963 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:37:09.719Z,1526938629.719 [NAL9602](INFO): GPS fix at 20180521T213705: (36.804463, -121.806127)
2018-05-21T21:37:09.796Z,1526938629.796 [Default:CheckIn:Read_GPS] Stopped
2018-05-21T21:37:09.796Z,1526938629.796 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-05-21T21:37:14.221Z,1526938634.221 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180520T234132/Courier0387.lzma
2018-05-21T21:37:15.013Z,1526938635.013 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Courier0387.lzma.bak
2018-05-21T21:37:15.013Z,1526938635.013 [DataOverHttps](INFO): SBD MOMSN=8288686
2018-05-21T21:37:28.850Z,1526938648.850 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180520T234132/Express0388.lzma
2018-05-21T21:37:29.644Z,1526938649.644 [DataOverHttps](INFO): Moved sent file to Logs/20180520T234132/Express0388.lzma.bak
2018-05-21T21:37:29.644Z,1526938649.644 [DataOverHttps](INFO): SBD MOMSN=8288689
2018-05-21T21:37:30.375Z,1526938650.375 [Default:CheckIn:Read_Iridium] Stopped
2018-05-21T21:37:30.375Z,1526938650.375 [Default:CheckIn:C.Wait] Running Loop=1
2018-05-21T21:37:30.375Z,1526938650.375 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-05-21T21:37:44.500Z,1526938664.500 [NAL9602](INFO): Powering down
2018-05-21T21:40:09.140Z,1526938809.140 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:40:09.140Z,1526938809.140 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-05-21T21:40:09.141Z,1526938809.141 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:40:09.153Z,1526938809.153 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:40:09.550Z,1526938809.550 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:40:09.550Z,1526938809.550 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-05-21T21:40:09.939Z,1526938809.939 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:40:09.939Z,1526938809.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:40:09.939Z,1526938809.939 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:41:15.887Z,1526938875.887 [Radio_Surface](INFO): Powering down
2018-05-21T21:41:16.291Z,1526938876.291 [Radio_Surface](FAULT): LCB fault:  Software Overcurrent.
2018-05-21T21:41:16.291Z,1526938876.291 [Radio_Surface] Hardware Fault, FailCount= 1
2018-05-21T21:41:16.291Z,1526938876.291 [Radio_Surface](ERROR): Hardware Fault
2018-05-21T21:41:16.418Z,1526938876.418 [CBIT](ERROR): Hardware Fault in component: Radio_Surface
2018-05-21T21:41:17.536Z,1526938877.536 [CBIT](INFO): Clearing failed state for component Radio_Surface
2018-05-21T21:41:17.536Z,1526938877.536 [Radio_Surface] No Fault, FailCount= 1
2018-05-21T21:41:17.914Z,1526938877.914 [Radio_Surface](INFO): Powering up
2018-05-21T21:42:00.742Z,1526938920.742 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-05-21T21:42:30.798Z,1526938950.798 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-05-21T21:42:30.798Z,1526938950.798 [Default:CheckIn:C.Wait] Stopped
2018-05-21T21:42:30.798Z,1526938950.798 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-05-21T21:42:30.799Z,1526938950.799 [Default:CheckIn:D] Running Loop=1
2018-05-21T21:42:31.203Z,1526938951.203 [Default:CheckIn:D] Stopped
2018-05-21T21:42:31.203Z,1526938951.203 [Default:CheckIn:E] Running Loop=1
2018-05-21T21:42:31.604Z,1526938951.604 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1320.969401 min 
2018-05-21T21:42:31.604Z,1526938951.604 [Default:CheckIn:E] Stopped
2018-05-21T21:42:31.604Z,1526938951.604 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-05-21T21:42:31.604Z,1526938951.604 [Default:CheckIn] Stopped
2018-05-21T21:42:31.604Z,1526938951.604 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-05-21T21:42:31.604Z,1526938951.604 [Default:CheckIn](INFO): Running loop #130
2018-05-21T21:42:31.604Z,1526938951.604 [Default:CheckIn] Running Loop=130
2018-05-21T21:42:31.605Z,1526938951.605 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-05-21T21:42:31.605Z,1526938951.605 [Default:CheckIn:Read_GPS] Running Loop=1
2018-05-21T21:42:32.347Z,1526938952.347 [NAL9602](INFO): Powering up
2018-05-21T21:42:43.548Z,1526938963.548 [NAL9602](INFO): NAL9602 initialized
2018-05-21T21:43:01.142Z,1526938981.142 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-05-21T21:43:07.549Z,1526938987.549 [NAL9602](INFO): SBD MO Status=0, MOMSN=5861, MT Status=0, MTMSN=0
2018-05-21T21:43:07.549Z,1526938987.549 [NAL9602](INFO): No messages in MT queue
2018-05-21T21:43:10.009Z,1526938990.009 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-05-21T21:43:10.009Z,1526938990.009 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-05-21T21:43:10.009Z,1526938990.009 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-05-21T21:43:10.034Z,1526938990.034 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-05-21T21:43:10.418Z,1526938990.418 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-05-21T21:43:10.418Z,1526938990.418 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-05-21T21:43:10.807Z,1526938990.807 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-05-21T21:43:10.807Z,1526938990.807 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-05-21T21:43:10.807Z,1526938990.807 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-05-21T21:43:35.543Z,1526939015.543 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.079483
2018-05-21T21:44:55.519Z,1526939095.519 [CBIT](DEBUG): EFC running - data check-sum false
2018-05-21T21:44:56.374Z,1526939096.374 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.373925 seconds old.
2018-05-21T21:44:56.376Z,1526939096.376 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.374606 seconds old.
2018-05-21T21:44:56.727Z,1526939096.727 [DataOverHttps](IMPORTANT): SBD MTMSN=20180521T214452
2018-05-21T21:44:56.730Z,1526939096.730 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002893
2018-05-21T21:44:56.804Z,1526939096.804 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.804381 seconds old.
2018-05-21T21:44:56.810Z,1526939096.810 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.804855 seconds old.
2018-05-21T21:45:00.793Z,1526939100.793 [DataOverHttps](INFO): Received command:restart logs