2018-03-19T19:33:43.089Z,1521488023.089 [Supervisor](DEBUG): Initializing supervisor.
2018-03-19T19:33:43.092Z,1521488023.092 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-03-19T19:33:43.092Z,1521488023.092 [SyncHandler](INFO): Protected caller Thread ID is 800
2018-03-19T19:33:43.093Z,1521488023.093 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-03-19T19:33:43.094Z,1521488023.094 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-03-19T19:33:43.094Z,1521488023.094 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 801
2018-03-19T19:33:43.096Z,1521488023.096 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-03-19T19:33:43.107Z,1521488023.107 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-03-19T19:33:43.108Z,1521488023.108 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-03-19T19:33:43.108Z,1521488023.108 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 802
2018-03-19T19:33:43.109Z,1521488023.109 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-03-19T19:33:43.110Z,1521488023.110 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-03-19T19:33:43.110Z,1521488023.110 [logger ThreadHandler](INFO): Protected caller Thread ID is 803
2018-03-19T19:33:43.112Z,1521488023.112 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-03-19T19:33:43.113Z,1521488023.113 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-03-19T19:33:43.117Z,1521488023.117 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-03-19T19:33:43.419Z,1521488023.419 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-03-19T19:33:43.419Z,1521488023.419 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-03-19T19:33:43.605Z,1521488023.605 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-03-19T19:33:43.605Z,1521488023.605 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-03-19T19:33:43.865Z,1521488023.865 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-03-19T19:33:43.867Z,1521488023.867 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-03-19T19:33:44.003Z,1521488024.003 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-03-19T19:33:44.004Z,1521488024.004 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-03-19T19:33:44.099Z,1521488024.099 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-03-19T19:33:44.100Z,1521488024.100 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-03-19T19:33:44.522Z,1521488024.522 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-03-19T19:33:44.523Z,1521488024.523 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-03-19T19:33:44.841Z,1521488024.841 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-03-19T19:33:44.843Z,1521488024.843 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-03-19T19:33:45.248Z,1521488025.248 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-03-19T19:33:45.250Z,1521488025.250 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-03-19T19:33:45.351Z,1521488025.351 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-03-19T19:33:45.351Z,1521488025.351 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-03-19T19:33:45.446Z,1521488025.446 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-03-19T19:33:45.447Z,1521488025.447 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-03-19T19:33:45.642Z,1521488025.642 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-03-19T19:33:45.642Z,1521488025.642 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-03-19T19:33:45.837Z,1521488025.837 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-03-19T19:33:45.838Z,1521488025.838 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-03-19T19:33:46.152Z,1521488026.152 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-03-19T19:33:46.153Z,1521488026.153 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-03-19T19:33:46.289Z,1521488026.289 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-03-19T19:33:46.289Z,1521488026.289 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-03-19T19:33:46.370Z,1521488026.370 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2018-03-19T19:33:46.373Z,1521488026.373 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2018-03-19T19:33:46.523Z,1521488026.523 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2018-03-19T19:33:47.127Z,1521488027.127 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2018-03-19T19:33:47.219Z,1521488027.219 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2018-03-19T19:33:47.303Z,1521488027.303 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2018-03-19T19:33:47.444Z,1521488027.444 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2018-03-19T19:33:47.607Z,1521488027.607 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2018-03-19T19:33:47.683Z,1521488027.683 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2018-03-19T19:33:47.900Z,1521488027.900 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-03-19T19:33:47.901Z,1521488027.901 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2018-03-19T19:33:47.983Z,1521488027.983 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2018-03-19T19:33:48.071Z,1521488028.071 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2018-03-19T19:33:48.169Z,1521488028.169 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2018-03-19T19:33:48.289Z,1521488028.289 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2018-03-19T19:33:48.292Z,1521488028.292 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-03-19T19:33:48.565Z,1521488028.565 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-03-19T19:33:48.565Z,1521488028.565 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-03-19T19:33:48.620Z,1521488028.620 [DepthRateCalculator] Loaded
2018-03-19T19:33:48.620Z,1521488028.620 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-03-19T19:33:48.626Z,1521488028.626 [PitchRateCalculator] Loaded
2018-03-19T19:33:48.626Z,1521488028.626 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-03-19T19:33:48.641Z,1521488028.641 [SpeedCalculator] Loaded
2018-03-19T19:33:48.642Z,1521488028.642 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-03-19T19:33:48.662Z,1521488028.662 [TempGradientCalculator] Loaded
2018-03-19T19:33:48.662Z,1521488028.662 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-03-19T19:33:48.676Z,1521488028.676 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-03-19T19:33:48.677Z,1521488028.677 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-03-19T19:33:48.682Z,1521488028.682 [YawRateCalculator] Loaded
2018-03-19T19:33:48.682Z,1521488028.682 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-03-19T19:33:48.720Z,1521488028.720 [ElevatorOffsetCalculator] Loaded
2018-03-19T19:33:48.720Z,1521488028.720 [ComponentRegistry](DEBUG): SyncComponent "ElevatorOffsetCalculator" handled in the control thread.
2018-03-19T19:33:48.721Z,1521488028.721 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-03-19T19:33:48.722Z,1521488028.722 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-03-19T19:33:48.839Z,1521488028.839 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-03-19T19:33:48.839Z,1521488028.839 [StratificationFrontDetector](DEBUG): (re)initializing
2018-03-19T19:33:48.840Z,1521488028.840 [StratificationFrontDetector] Loaded
2018-03-19T19:33:48.840Z,1521488028.840 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-03-19T19:33:48.840Z,1521488028.840 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-03-19T19:33:48.841Z,1521488028.841 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-03-19T19:33:48.971Z,1521488028.971 [BuoyancyServo] Loaded
2018-03-19T19:33:48.971Z,1521488028.971 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-03-19T19:33:48.985Z,1521488028.985 [ElevatorServo] Loaded
2018-03-19T19:33:48.986Z,1521488028.986 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-03-19T19:33:48.999Z,1521488028.999 [MassServo] Loaded
2018-03-19T19:33:48.000Z,1521488029.000 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-03-19T19:33:49.014Z,1521488029.014 [RudderServo] Loaded
2018-03-19T19:33:49.014Z,1521488029.014 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-03-19T19:33:49.027Z,1521488029.027 [ThrusterServo] Loaded
2018-03-19T19:33:49.028Z,1521488029.028 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-03-19T19:33:49.028Z,1521488029.028 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-03-19T19:33:49.029Z,1521488029.029 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-03-19T19:33:49.052Z,1521488029.052 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-03-19T19:33:49.053Z,1521488029.053 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-03-19T19:33:49.174Z,1521488029.174 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-03-19T19:33:49.175Z,1521488029.175 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-03-19T19:33:49.700Z,1521488029.700 [DataOverHttps] Loaded
2018-03-19T19:33:49.700Z,1521488029.700 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-03-19T19:33:49.713Z,1521488029.713 [Depth_Keller] Loaded
2018-03-19T19:33:49.714Z,1521488029.714 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-03-19T19:33:49.718Z,1521488029.718 [DropWeight] Loaded
2018-03-19T19:33:49.718Z,1521488029.718 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-03-19T19:33:49.811Z,1521488029.811 [NAL9602] Loaded
2018-03-19T19:33:49.811Z,1521488029.811 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-03-19T19:33:49.827Z,1521488029.827 [Onboard] Loaded
2018-03-19T19:33:49.827Z,1521488029.827 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-03-19T19:33:49.837Z,1521488029.837 [Radio_Surface] Loaded
2018-03-19T19:33:49.837Z,1521488029.837 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-03-19T19:33:49.838Z,1521488029.838 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 408724E0
2018-03-19T19:33:49.839Z,1521488029.839 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 885
2018-03-19T19:33:49.989Z,1521488029.989 [PNI_TCM] Loaded
2018-03-19T19:33:49.989Z,1521488029.989 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-03-19T19:33:50.046Z,1521488030.046 [Rowe_600LCM] Loaded
2018-03-19T19:33:50.047Z,1521488030.047 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2018-03-19T19:33:50.048Z,1521488030.048 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 408A24E0
2018-03-19T19:33:50.048Z,1521488030.048 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 886
2018-03-19T19:33:51.721Z,1521488031.721 [BPC1] Loaded
2018-03-19T19:33:51.722Z,1521488031.722 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-03-19T19:33:51.722Z,1521488031.722 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-03-19T19:33:51.724Z,1521488031.724 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-03-19T19:33:51.935Z,1521488031.935 [SBIT](DEBUG): Construct Startup Built In Test.
2018-03-19T19:33:51.956Z,1521488031.956 [SBIT] Loaded
2018-03-19T19:33:51.956Z,1521488031.956 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-03-19T19:33:51.957Z,1521488031.957 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-03-19T19:33:51.968Z,1521488031.968 [IBIT] Loaded
2018-03-19T19:33:51.968Z,1521488031.968 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-03-19T19:33:51.971Z,1521488031.971 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-03-19T19:33:52.113Z,1521488032.113 [CBIT] Loaded
2018-03-19T19:33:52.113Z,1521488032.113 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-03-19T19:33:52.114Z,1521488032.114 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-03-19T19:33:52.115Z,1521488032.115 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-03-19T19:33:52.293Z,1521488032.293 [Aanderaa_O2] Loaded
2018-03-19T19:33:52.294Z,1521488032.294 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-03-19T19:33:52.305Z,1521488032.305 [CANONSampler] Loaded
2018-03-19T19:33:52.305Z,1521488032.305 [ComponentRegistry](DEBUG): SyncComponent "CANONSampler" handled in the control thread.
2018-03-19T19:33:52.379Z,1521488032.379 [CTD_NeilBrown] Loaded
2018-03-19T19:33:52.379Z,1521488032.379 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2018-03-19T19:33:52.380Z,1521488032.380 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 409624E0
2018-03-19T19:33:52.380Z,1521488032.380 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 887
2018-03-19T19:33:52.424Z,1521488032.424 [CTD_Seabird] Loaded
2018-03-19T19:33:52.424Z,1521488032.424 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-03-19T19:33:52.425Z,1521488032.425 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 409924E0
2018-03-19T19:33:52.426Z,1521488032.426 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 888
2018-03-19T19:33:52.440Z,1521488032.440 [PAR_Licor] Loaded
2018-03-19T19:33:52.440Z,1521488032.440 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-03-19T19:33:52.486Z,1521488032.486 [WetLabsBB2FL] Loaded
2018-03-19T19:33:52.486Z,1521488032.486 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-03-19T19:33:52.487Z,1521488032.487 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 409C24E0
2018-03-19T19:33:52.487Z,1521488032.487 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 889
2018-03-19T19:33:52.488Z,1521488032.488 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-03-19T19:33:52.489Z,1521488032.489 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-03-19T19:33:52.573Z,1521488032.573 [VerticalControl](DEBUG): Construct VerticalControl.
2018-03-19T19:33:52.653Z,1521488032.653 [VerticalControl] Loaded
2018-03-19T19:33:52.654Z,1521488032.654 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-03-19T19:33:52.654Z,1521488032.654 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-03-19T19:33:52.709Z,1521488032.709 [HorizontalControl] Loaded
2018-03-19T19:33:52.709Z,1521488032.709 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-03-19T19:33:52.710Z,1521488032.710 [SpeedControl](DEBUG): Construct SpeedControl.
2018-03-19T19:33:52.712Z,1521488032.712 [SpeedControl] Loaded
2018-03-19T19:33:52.712Z,1521488032.712 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-03-19T19:33:52.712Z,1521488032.712 [LoopControl](DEBUG): Construct LoopControl.
2018-03-19T19:33:52.713Z,1521488032.713 [LoopControl] Loaded
2018-03-19T19:33:52.713Z,1521488032.713 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-03-19T19:33:52.714Z,1521488032.714 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-03-19T19:33:52.714Z,1521488032.714 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-03-19T19:33:52.750Z,1521488032.750 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-03-19T19:33:52.751Z,1521488032.751 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-03-19T19:33:52.854Z,1521488032.854 [DeadReckonUsingSpeedCalculator] Loaded
2018-03-19T19:33:52.855Z,1521488032.855 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-03-19T19:33:52.907Z,1521488032.907 [DeadReckonWithRespectToSeafloor] Loaded
2018-03-19T19:33:52.907Z,1521488032.907 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-03-19T19:33:52.923Z,1521488032.923 [NavChart] Loaded
2018-03-19T19:33:52.923Z,1521488032.923 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-03-19T19:33:52.927Z,1521488032.927 [UniversalFixResidualReporter] Loaded
2018-03-19T19:33:52.927Z,1521488032.927 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-03-19T19:33:52.927Z,1521488032.927 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-03-19T19:33:52.931Z,1521488032.931 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-03-19T19:33:52.932Z,1521488032.932 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-03-19T19:33:52.938Z,1521488032.938 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-03-19T19:33:52.939Z,1521488032.939 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A4E4E0
2018-03-19T19:33:52.940Z,1521488032.940 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 890
2018-03-19T19:33:52.944Z,1521488032.944 [Supervisor](INFO): Main Thread ID is 796
2018-03-19T19:33:52.944Z,1521488032.944 [Supervisor](DEBUG): Running supervisor.
2018-03-19T19:33:52.945Z,1521488032.945 [CommandLine ThreadHandler](INFO): Handler Thread ID is 891
2018-03-19T19:33:52.947Z,1521488032.947 [controlThread ThreadHandler](INFO): Handler Thread ID is 892
2018-03-19T19:33:52.948Z,1521488032.948 [controlThread](DEBUG): Initializing ControlThread
2018-03-19T19:33:52.948Z,1521488032.948 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-03-19T19:33:52.949Z,1521488032.949 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-03-19T19:33:52.949Z,1521488032.949 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-03-19T19:33:52.949Z,1521488032.949 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-03-19T19:33:52.950Z,1521488032.950 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-03-19T19:33:52.951Z,1521488032.951 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-03-19T19:33:52.951Z,1521488032.951 [ElevatorOffsetCalculator](DEBUG): Initializing ElevatorOffsetCalculator.
2018-03-19T19:33:52.957Z,1521488032.957 [SBIT](INFO): Initialize SBIT Component.
2018-03-19T19:33:52.957Z,1521488032.957 [SBIT](IMPORTANT): git: 2018-03-19
2018-03-19T19:33:52.957Z,1521488032.957 [SBIT](INFO): git hash: a0816c0235cbc02280eea7af955e3502bfefb717
2018-03-19T19:33:52.958Z,1521488032.958 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-03-19T19:33:52.959Z,1521488032.959 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-03-19T19:33:52.960Z,1521488032.960 [SBIT](INFO): Beginning SBIT in 23.000000 seconds.
2018-03-19T19:33:52.960Z,1521488032.960 [IBIT](INFO): Initialize IBIT Component.
2018-03-19T19:33:52.961Z,1521488032.961 [CBIT](DEBUG): Initialize CBIT Component.
2018-03-19T19:33:52.961Z,1521488032.961 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2018-03-19T19:33:52.962Z,1521488032.962 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET.
2018-03-19T19:33:52.963Z,1521488032.963 [logger ThreadHandler](INFO): Handler Thread ID is 893
2018-03-19T19:33:52.979Z,1521488032.979 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 894
2018-03-19T19:33:52.985Z,1521488032.985 [Radio_Surface](INFO): Powering up
2018-03-19T19:33:52.991Z,1521488032.991 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 895
2018-03-19T19:33:52.991Z,1521488032.991 [Rowe_600LCM](INFO): Initializing
2018-03-19T19:33:52.992Z,1521488032.992 [Rowe_600LCM](INFO): Checking LCM
2018-03-19T19:33:53.111Z,1521488033.111 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 896
2018-03-19T19:33:53.112Z,1521488033.112 [CTD_NeilBrown](INFO): Powering down
2018-03-19T19:33:53.139Z,1521488033.139 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-03-19T19:33:53.140Z,1521488033.140 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-03-19T19:33:53.141Z,1521488033.141 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-03-19T19:33:53.142Z,1521488033.142 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-03-19T19:33:53.142Z,1521488033.142 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:33:53.143Z,1521488033.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:33:53.143Z,1521488033.143 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:33:53.144Z,1521488033.144 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:33:53.144Z,1521488033.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:33:53.144Z,1521488033.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:33:53.145Z,1521488033.145 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-03-19T19:33:53.213Z,1521488033.213 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 897
2018-03-19T19:33:53.213Z,1521488033.213 [CTD_Seabird](INFO): Initializing
2018-03-19T19:33:53.214Z,1521488033.214 [CTD_Seabird](INFO): Checking LCM
2018-03-19T19:33:53.218Z,1521488033.218 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-03-19T19:33:53.219Z,1521488033.219 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-03-19T19:33:53.243Z,1521488033.243 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 898
2018-03-19T19:33:53.245Z,1521488033.245 [WetLabsBB2FL](INFO): Powering down
2018-03-19T19:33:53.334Z,1521488033.334 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-19T19:33:53.335Z,1521488033.335 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 899
2018-03-19T19:33:53.342Z,1521488033.342 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-03-19T19:33:53.342Z,1521488033.342 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-03-19T19:33:53.342Z,1521488033.342 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-03-19T19:33:53.342Z,1521488033.342 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-03-19T19:33:53.343Z,1521488033.343 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-03-19T19:33:53.343Z,1521488033.343 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-03-19T19:33:53.343Z,1521488033.343 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-03-19T19:33:53.343Z,1521488033.343 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-03-19T19:33:53.343Z,1521488033.343 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-03-19T19:33:53.344Z,1521488033.344 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-03-19T19:33:53.344Z,1521488033.344 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-03-19T19:33:53.344Z,1521488033.344 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-03-19T19:33:53.344Z,1521488033.344 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-03-19T19:33:53.344Z,1521488033.344 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-03-19T19:33:53.345Z,1521488033.345 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-03-19T19:33:53.345Z,1521488033.345 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-03-19T19:33:53.410Z,1521488033.410 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-03-19T19:33:53.410Z,1521488033.410 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-03-19T19:33:53.463Z,1521488033.463 [CTD_Seabird](INFO): LCM OK
2018-03-19T19:33:53.463Z,1521488033.463 [CTD_Seabird](INFO): Powering up
2018-03-19T19:33:53.463Z,1521488033.463 [Rowe_600LCM](INFO): LCM OK
2018-03-19T19:33:53.463Z,1521488033.463 [Rowe_600LCM](INFO): Powering up
2018-03-19T19:33:53.481Z,1521488033.481 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-03-19T19:33:53.482Z,1521488033.482 [Default:A.Wait](DEBUG): Construct Wait.
2018-03-19T19:33:53.484Z,1521488033.484 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-19T19:33:53.531Z,1521488033.531 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-03-19T19:33:53.534Z,1521488033.534 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-03-19T19:33:53.552Z,1521488033.552 [Default:E.Execute](DEBUG): Construct Execute.
2018-03-19T19:33:53.575Z,1521488033.575 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-03-19T19:33:53.580Z,1521488033.580 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,Aanderaa_O2,CANONSampler,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,ElevatorOffsetCalculator,StratificationFrontDetector,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-03-19T19:33:53.599Z,1521488033.599 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-03-19T19:33:53.968Z,1521488033.968 [CANONSampler](INFO): Powering down
2018-03-19T19:33:54.279Z,1521488034.279 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:54.392Z,1521488034.392 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:54.491Z,1521488034.491 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-19T19:33:54.499Z,1521488034.499 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-19T19:33:54.505Z,1521488034.505 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-03-19T19:33:54.511Z,1521488034.511 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-03-19T19:33:54.530Z,1521488034.530 [MassServo](DEBUG): Initializing EZServoServo.
2018-03-19T19:33:54.539Z,1521488034.539 [MassServo](DEBUG): Initializing MassServo.
2018-03-19T19:33:54.564Z,1521488034.564 [RudderServo](DEBUG): Initializing EZServoServo.
2018-03-19T19:33:54.571Z,1521488034.571 [RudderServo](DEBUG): Initializing RudderServo.
2018-03-19T19:33:54.576Z,1521488034.576 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-03-19T19:33:54.583Z,1521488034.583 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-03-19T19:33:54.632Z,1521488034.632 [CommandLine](FAULT): Scheduling is paused
2018-03-19T19:33:54.632Z,1521488034.632 [CBIT](INFO): Critical error at 20180319T193352
2018-03-19T19:33:54.633Z,1521488034.633 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-03-19T19:33:54.809Z,1521488034.809 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:54.810Z,1521488034.810 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:55.135Z,1521488035.135 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:55.136Z,1521488035.136 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:55.467Z,1521488035.467 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-03-19T19:33:55.467Z,1521488035.467 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-03-19T19:33:55.467Z,1521488035.467 [BuoyancyServo] Communications Fault, FailCount= 1
2018-03-19T19:33:55.467Z,1521488035.467 [BuoyancyServo](ERROR): Communications Fault
2018-03-19T19:33:55.674Z,1521488035.674 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-03-19T19:33:55.732Z,1521488035.732 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:55.733Z,1521488035.733 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:55.746Z,1521488035.746 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-03-19T19:33:55.751Z,1521488035.751 [BuoyancyServo](INFO): Powering down
2018-03-19T19:33:56.147Z,1521488036.147 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:56.148Z,1521488036.148 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:56.535Z,1521488036.535 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:56.535Z,1521488036.535 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:56.954Z,1521488036.954 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:56.971Z,1521488036.971 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:57.320Z,1521488037.320 [Aanderaa_O2](INFO): Powering down
2018-03-19T19:33:57.455Z,1521488037.455 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:57.456Z,1521488037.456 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-03-19T19:33:57.551Z,1521488037.551 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-03-19T19:33:57.630Z,1521488037.630 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2018-03-19T19:33:57.804Z,1521488037.804 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-03-19T19:33:57.811Z,1521488037.811 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-03-19T19:33:57.813Z,1521488037.813 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-03-19T19:33:57.944Z,1521488037.944 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-03-19T19:33:57.944Z,1521488037.944 [BuoyancyServo] No Fault, FailCount= 1
2018-03-19T19:33:58.218Z,1521488038.218 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-19T19:33:58.223Z,1521488038.223 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-19T19:33:58.704Z,1521488038.704 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-19T19:33:58.990Z,1521488038.990 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-03-19T19:33:58.991Z,1521488038.991 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-03-19T19:33:59.083Z,1521488039.083 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-03-19T19:33:59.083Z,1521488039.083 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-03-19T19:33:59.083Z,1521488039.083 [BuoyancyServo] Communications Fault, FailCount= 2
2018-03-19T19:33:59.083Z,1521488039.083 [BuoyancyServo](ERROR): Communications Fault
2018-03-19T19:33:59.280Z,1521488039.280 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-03-19T19:33:59.384Z,1521488039.384 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-19T19:33:59.384Z,1521488039.384 [CTD_Seabird](INFO): Powering down
2018-03-19T19:33:59.441Z,1521488039.441 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-03-19T19:33:59.441Z,1521488039.441 [BuoyancyServo](INFO): Powering down
2018-03-19T19:34:01.895Z,1521488041.895 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-03-19T19:34:01.895Z,1521488041.895 [BuoyancyServo] No Fault, FailCount= 2
2018-03-19T19:34:02.147Z,1521488042.147 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-03-19T19:34:02.148Z,1521488042.148 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-03-19T19:34:14.812Z,1521488054.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:34:15.607Z,1521488055.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:34:16.566Z,1521488056.566 [SBIT](IMPORTANT): Beginning Startup BIT
2018-03-19T19:34:16.578Z,1521488056.578 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-19T19:34:20.000Z,1521488060.000 [NAL9602](INFO): Powering up NAL9602
2018-03-19T19:34:27.680Z,1521488067.680 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.003801
CHAN A1 (24V): -0.012555
CHAN A2 (12V): -0.002027
CHAN A3 (5V): -0.001274
CHAN B0 (3.3V): -0.000445
CHAN B1 (3.15aV): -0.000154
CHAN B2 (3.15bV): 0.000193
CHAN B3 (GND): -0.000033
OPEN: -0.000576
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-19T19:34:31.196Z,1521488071.196 [NAL9602](INFO): NAL9602 initialized
2018-03-19T19:34:40.503Z,1521488080.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:34:41.299Z,1521488081.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:35:10.432Z,1521488110.432 [SBIT](IMPORTANT): SBIT PASSED
2018-03-19T19:35:10.523Z,1521488110.523 [CommandLine](IMPORTANT): got command configSet list
2018-03-19T19:35:10.523Z,1521488110.523 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2018-03-19T19:35:10.527Z,1521488110.527 [CommandLine](IMPORTANT): Rowe_600LCM.loadAtStartup=0 bool;

2018-03-19T19:35:10.841Z,1521488110.841 [MissionManager](IMPORTANT): Started mission Startup
2018-03-19T19:35:10.842Z,1521488110.842 [Startup] Running Loop=1
2018-03-19T19:35:10.842Z,1521488110.842 [Startup](DEBUG): Aggregate::initialize Startup
2018-03-19T19:35:10.842Z,1521488110.842 [Startup:A.GoToSurface] Running Loop=1
2018-03-19T19:35:10.842Z,1521488110.842 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-19T19:35:10.851Z,1521488110.851 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-19T19:35:10.851Z,1521488110.851 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-19T19:35:10.852Z,1521488110.852 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-19T19:35:10.852Z,1521488110.852 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-19T19:35:10.852Z,1521488110.852 [Startup:A.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-03-19T19:35:10.862Z,1521488110.862 [Startup:StartupSatComms] Running Loop=1
2018-03-19T19:35:10.862Z,1521488110.862 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-03-19T19:35:10.866Z,1521488110.866 [Startup:StartupSatComms:A] Running Loop=1
2018-03-19T19:35:11.224Z,1521488111.224 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-03-19T19:36:11.219Z,1521488171.219 [Startup:StartupSatComms:A](INFO): Timed out from 2018-03-19T19:35:10.9Z
2018-03-19T19:36:11.220Z,1521488171.220 [Startup:StartupSatComms:A] Stopped
2018-03-19T19:36:11.220Z,1521488171.220 [Startup:StartupSatComms:B] Running Loop=1
2018-03-19T19:36:11.628Z,1521488171.628 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-19T19:36:26.514Z,1521488186.514 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003645
2018-03-19T19:36:28.654Z,1521488188.654 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-03-19T19:36:28.654Z,1521488188.654 [Rowe_600LCM] Communications Fault, FailCount= 1
2018-03-19T19:36:28.655Z,1521488188.655 [Rowe_600LCM](ERROR): Communications Fault
2018-03-19T19:36:29.059Z,1521488189.059 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-03-19T19:36:29.227Z,1521488189.227 [Rowe_600LCM](INFO): Powering down
2018-03-19T19:36:31.822Z,1521488191.822 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2018-03-19T19:36:31.822Z,1521488191.822 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2018-03-19T19:36:31.822Z,1521488191.822 [Rowe_600LCM] No Fault, FailCount= 1
2018-03-19T19:36:31.856Z,1521488191.856 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20180319T192909/Courier0004.lzma
2018-03-19T19:36:32.055Z,1521488192.055 [Rowe_600LCM](INFO): Initializing
2018-03-19T19:36:32.055Z,1521488192.055 [Rowe_600LCM](INFO): Checking LCM
2018-03-19T19:36:32.055Z,1521488192.055 [Rowe_600LCM](INFO): LCM OK
2018-03-19T19:36:32.056Z,1521488192.056 [Rowe_600LCM](INFO): Powering up
2018-03-19T19:36:32.631Z,1521488192.631 [DataOverHttps](INFO): Moved sent file to Logs/20180319T192909/Courier0004.lzma.bak
2018-03-19T19:36:32.631Z,1521488192.631 [DataOverHttps](INFO): SBD MOMSN=8138240
2018-03-19T19:36:36.216Z,1521488196.216 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-03-19T19:36:36.303Z,1521488196.303 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2018-03-19T19:36:36.304Z,1521488196.304 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-03-19T19:36:36.305Z,1521488196.305 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-03-19T19:36:36.306Z,1521488196.306 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-03-19T19:36:42.701Z,1521488202.701 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180319T193343/Courier0000.lzma
2018-03-19T19:36:43.499Z,1521488203.499 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0000.lzma.bak
2018-03-19T19:36:43.499Z,1521488203.499 [DataOverHttps](INFO): SBD MOMSN=8138242
2018-03-19T19:36:53.217Z,1521488213.217 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:36:53.217Z,1521488213.217 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-03-19T19:36:53.217Z,1521488213.217 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T19:36:53.219Z,1521488213.219 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:36:53.219Z,1521488213.219 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-19T19:36:53.219Z,1521488213.219 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T19:36:53.255Z,1521488213.255 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T19:36:53.255Z,1521488213.255 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T19:36:53.271Z,1521488213.271 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20180319T192909/Express0005.lzma
2018-03-19T19:36:53.388Z,1521488213.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T19:36:53.389Z,1521488213.389 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-03-19T19:36:53.389Z,1521488213.389 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T19:36:53.389Z,1521488213.389 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-19T19:36:53.729Z,1521488213.729 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:36:53.730Z,1521488213.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:36:53.730Z,1521488213.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:36:53.731Z,1521488213.731 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:36:53.731Z,1521488213.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:36:53.731Z,1521488213.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:36:54.071Z,1521488214.071 [DataOverHttps](INFO): Moved sent file to Logs/20180319T192909/Express0005.lzma.bak
2018-03-19T19:36:54.071Z,1521488214.071 [DataOverHttps](INFO): SBD MOMSN=8138246
2018-03-19T19:37:03.932Z,1521488223.932 [DataOverHttps](INFO): Sending 700 bytes from file Logs/20180319T193343/Express0001.lzma
2018-03-19T19:37:04.711Z,1521488224.711 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0001.lzma.bak
2018-03-19T19:37:04.711Z,1521488224.711 [DataOverHttps](INFO): SBD MOMSN=8138248
2018-03-19T19:37:05.163Z,1521488225.163 [Startup:StartupSatComms:B] Stopped
2018-03-19T19:37:05.163Z,1521488225.163 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-03-19T19:37:05.163Z,1521488225.163 [Startup:StartupSatComms] Stopped
2018-03-19T19:37:05.163Z,1521488225.163 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-03-19T19:37:05.164Z,1521488225.164 [Startup](INFO): Completed Startup
2018-03-19T19:37:05.164Z,1521488225.164 [MissionManager](INFO): Startup is completed.
2018-03-19T19:37:05.165Z,1521488225.165 [MissionManager](INFO): Uninitializing Mission Startup
2018-03-19T19:37:05.165Z,1521488225.165 [Startup] Stopped
2018-03-19T19:37:05.165Z,1521488225.165 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-03-19T19:37:05.165Z,1521488225.165 [Startup:A.GoToSurface] Stopped
2018-03-19T19:37:05.165Z,1521488225.165 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-19T19:37:05.571Z,1521488225.571 [MissionManager](IMPORTANT): Started mission Default
2018-03-19T19:37:05.571Z,1521488225.571 [Default] Running Loop=1
2018-03-19T19:37:05.571Z,1521488225.571 [Default](DEBUG): Aggregate::initialize Default
2018-03-19T19:37:05.571Z,1521488225.571 [Default:B.GoToSurface] Running Loop=1
2018-03-19T19:37:05.571Z,1521488225.571 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-19T19:37:05.571Z,1521488225.571 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-19T19:37:05.572Z,1521488225.572 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-19T19:37:05.572Z,1521488225.572 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-19T19:37:05.572Z,1521488225.572 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-19T19:37:05.573Z,1521488225.573 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-03-19T19:37:05.573Z,1521488225.573 [Default:A.Wait] Running Loop=1
2018-03-19T19:37:05.573Z,1521488225.573 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-03-19T19:37:18.843Z,1521488238.843 [Default:A.Wait](INFO): Done Waiting.
2018-03-19T19:37:18.843Z,1521488238.843 [Default:A.Wait] Stopped
2018-03-19T19:37:18.843Z,1521488238.843 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T19:37:19.257Z,1521488239.257 [Default:CheckIn] Running Loop=1
2018-03-19T19:37:19.257Z,1521488239.257 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T19:37:19.257Z,1521488239.257 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T19:37:19.664Z,1521488239.664 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-03-19T19:39:34.988Z,1521488374.988 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-19T19:39:53.852Z,1521488393.852 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:39:53.852Z,1521488393.852 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-03-19T19:39:53.852Z,1521488393.852 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T19:39:53.854Z,1521488393.854 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:39:53.854Z,1521488393.854 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-19T19:39:53.854Z,1521488393.854 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T19:39:53.877Z,1521488393.877 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T19:39:53.877Z,1521488393.877 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T19:39:54.254Z,1521488394.254 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T19:39:54.255Z,1521488394.255 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-03-19T19:39:54.255Z,1521488394.255 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T19:39:54.255Z,1521488394.255 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-19T19:39:54.629Z,1521488394.629 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:39:54.629Z,1521488394.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:39:54.629Z,1521488394.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:39:54.630Z,1521488394.630 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:39:54.631Z,1521488394.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:39:54.631Z,1521488394.631 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:42:19.408Z,1521488539.408 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-19T19:37:19.3Z
2018-03-19T19:42:19.408Z,1521488539.408 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T19:42:19.408Z,1521488539.408 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T19:42:19.844Z,1521488539.844 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-19T19:42:23.957Z,1521488543.957 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180319T193343/Courier0004.lzma
2018-03-19T19:42:24.759Z,1521488544.759 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0004.lzma.bak
2018-03-19T19:42:24.759Z,1521488544.759 [DataOverHttps](INFO): SBD MOMSN=8138275
2018-03-19T19:42:33.855Z,1521488553.855 [DataOverHttps](INFO): Sending 257 bytes from file Logs/20180319T193343/Express0005.lzma
2018-03-19T19:42:34.647Z,1521488554.647 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0005.lzma.bak
2018-03-19T19:42:34.647Z,1521488554.647 [DataOverHttps](INFO): SBD MOMSN=8138277
2018-03-19T19:42:35.126Z,1521488555.126 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T19:42:35.126Z,1521488555.126 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T19:42:35.126Z,1521488555.126 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T19:42:54.775Z,1521488574.775 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:42:54.775Z,1521488574.775 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-03-19T19:42:54.775Z,1521488574.775 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T19:42:54.777Z,1521488574.777 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:42:54.777Z,1521488574.777 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-19T19:42:54.777Z,1521488574.777 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T19:42:54.789Z,1521488574.789 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T19:42:54.789Z,1521488574.789 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T19:42:55.187Z,1521488575.187 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T19:42:55.188Z,1521488575.188 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-03-19T19:42:55.188Z,1521488575.188 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T19:42:55.188Z,1521488575.188 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-19T19:42:55.582Z,1521488575.582 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:42:55.582Z,1521488575.582 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:42:55.583Z,1521488575.583 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:42:55.583Z,1521488575.583 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:42:55.584Z,1521488575.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:42:55.584Z,1521488575.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:43:53.261Z,1521488633.261 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T19:44:16.650Z,1521488656.650 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-03-19T19:44:16.650Z,1521488656.650 [Rowe_600LCM] Communications Fault, FailCount= 2
2018-03-19T19:44:16.651Z,1521488656.651 [Rowe_600LCM](ERROR): Communications Fault
2018-03-19T19:44:16.864Z,1521488656.864 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2018-03-19T19:44:17.055Z,1521488657.055 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-03-19T19:44:17.144Z,1521488657.144 [Rowe_600LCM](INFO): Powering down
2018-03-19T19:44:18.490Z,1521488658.490 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2018-03-19T19:44:18.490Z,1521488658.490 [Rowe_600LCM] No Fault, FailCount= 2
2018-03-19T19:44:18.759Z,1521488658.759 [Rowe_600LCM](INFO): Initializing
2018-03-19T19:44:18.759Z,1521488658.759 [Rowe_600LCM](INFO): Checking LCM
2018-03-19T19:44:18.759Z,1521488658.759 [Rowe_600LCM](INFO): LCM OK
2018-03-19T19:44:18.759Z,1521488658.759 [Rowe_600LCM](INFO): Powering up
2018-03-19T19:44:23.008Z,1521488663.008 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-03-19T19:44:23.069Z,1521488663.069 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2018-03-19T19:44:23.071Z,1521488663.071 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-03-19T19:44:23.071Z,1521488663.071 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-03-19T19:44:23.072Z,1521488663.072 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-03-19T19:44:32.404Z,1521488672.404 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-19T19:44:32.404Z,1521488672.404 [NAL9602] Data Fault, FailCount= 1
2018-03-19T19:44:32.404Z,1521488672.404 [NAL9602](ERROR): Data Fault
2018-03-19T19:44:32.493Z,1521488672.493 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-19T19:44:32.809Z,1521488672.809 [NAL9602](INFO): Powering down
2018-03-19T19:44:33.677Z,1521488673.677 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-19T19:44:33.677Z,1521488673.677 [NAL9602] No Fault, FailCount= 1
2018-03-19T19:45:02.904Z,1521488702.904 [NAL9602](INFO): Powering up NAL9602
2018-03-19T19:45:14.100Z,1521488714.100 [NAL9602](INFO): NAL9602 initialized
2018-03-19T19:45:55.938Z,1521488755.938 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:45:55.938Z,1521488755.938 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-03-19T19:45:55.938Z,1521488755.938 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T19:45:55.952Z,1521488755.952 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:45:55.952Z,1521488755.952 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-19T19:45:55.952Z,1521488755.952 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T19:45:55.996Z,1521488755.996 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T19:45:55.996Z,1521488755.996 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T19:45:56.346Z,1521488756.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T19:45:56.346Z,1521488756.346 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-03-19T19:45:56.346Z,1521488756.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T19:45:56.346Z,1521488756.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-19T19:45:56.729Z,1521488756.729 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:45:56.730Z,1521488756.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:45:56.730Z,1521488756.730 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:45:56.731Z,1521488756.731 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:45:56.731Z,1521488756.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:45:56.731Z,1521488756.731 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:46:18.922Z,1521488778.922 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-03-19T19:46:18.922Z,1521488778.922 [Rowe_600LCM] Communications Fault, FailCount= 3
2018-03-19T19:46:18.923Z,1521488778.923 [Rowe_600LCM](ERROR): Communications Fault
2018-03-19T19:46:19.157Z,1521488779.157 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2018-03-19T19:46:19.327Z,1521488779.327 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-03-19T19:46:19.440Z,1521488779.440 [Rowe_600LCM](INFO): Powering down
2018-03-19T19:46:20.751Z,1521488780.751 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2018-03-19T19:46:20.751Z,1521488780.751 [Rowe_600LCM] No Fault, FailCount= 3
2018-03-19T19:46:21.055Z,1521488781.055 [Rowe_600LCM](INFO): Initializing
2018-03-19T19:46:21.055Z,1521488781.055 [Rowe_600LCM](INFO): Checking LCM
2018-03-19T19:46:21.055Z,1521488781.055 [Rowe_600LCM](INFO): LCM OK
2018-03-19T19:46:21.055Z,1521488781.055 [Rowe_600LCM](INFO): Powering up
2018-03-19T19:46:25.285Z,1521488785.285 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-03-19T19:46:25.357Z,1521488785.357 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2018-03-19T19:46:25.363Z,1521488785.363 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-03-19T19:46:25.364Z,1521488785.364 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-03-19T19:46:25.365Z,1521488785.365 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-03-19T19:47:11.958Z,1521488831.958 [CommandLine](IMPORTANT): got command burn 10.000000
2018-03-19T19:47:22.014Z,1521488842.014 [CommandLine](IMPORTANT): Deactivating dropweight wire
2018-03-19T19:47:35.596Z,1521488855.596 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T19:47:35.596Z,1521488855.596 [Default:CheckIn:C.Wait] Stopped
2018-03-19T19:47:35.596Z,1521488855.596 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T19:47:35.596Z,1521488855.596 [Default:CheckIn:D] Running Loop=1
2018-03-19T19:47:36.010Z,1521488856.010 [Default:CheckIn:D] Stopped
2018-03-19T19:47:36.010Z,1521488856.010 [Default:CheckIn:E] Running Loop=1
2018-03-19T19:47:39.195Z,1521488859.195 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.507283 min 
2018-03-19T19:47:39.197Z,1521488859.197 [Default:CheckIn:E] Stopped
2018-03-19T19:47:39.197Z,1521488859.197 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T19:47:39.197Z,1521488859.197 [Default:CheckIn] Stopped
2018-03-19T19:47:39.197Z,1521488859.197 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T19:47:39.197Z,1521488859.197 [Default:CheckIn](INFO): Running loop #2
2018-03-19T19:47:39.197Z,1521488859.197 [Default:CheckIn] Running Loop=2
2018-03-19T19:47:39.197Z,1521488859.197 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T19:47:39.197Z,1521488859.197 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T19:48:56.943Z,1521488936.943 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:48:56.943Z,1521488936.943 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-03-19T19:48:56.943Z,1521488936.943 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T19:48:56.945Z,1521488936.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:48:56.945Z,1521488936.945 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-19T19:48:56.945Z,1521488936.945 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T19:48:56.957Z,1521488936.957 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T19:48:56.957Z,1521488936.957 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T19:48:57.360Z,1521488937.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T19:48:57.360Z,1521488937.360 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-03-19T19:48:57.361Z,1521488937.361 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T19:48:57.361Z,1521488937.361 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-19T19:48:57.646Z,1521488937.646 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-03-19T19:48:57.646Z,1521488937.646 [Rowe_600LCM] Communications Fault, FailCount= 4
2018-03-19T19:48:57.647Z,1521488937.647 [Rowe_600LCM](ERROR): Communications Fault
2018-03-19T19:48:57.751Z,1521488937.751 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:48:57.751Z,1521488937.751 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:48:57.752Z,1521488937.752 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:48:57.753Z,1521488937.753 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:48:57.753Z,1521488937.753 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:48:57.754Z,1521488937.754 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:48:57.768Z,1521488937.768 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2018-03-19T19:48:58.051Z,1521488938.051 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-03-19T19:48:58.264Z,1521488938.264 [Rowe_600LCM](INFO): Powering down
2018-03-19T19:48:59.772Z,1521488939.772 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2018-03-19T19:48:59.772Z,1521488939.772 [Rowe_600LCM] No Fault, FailCount= 4
2018-03-19T19:48:59.880Z,1521488939.880 [Rowe_600LCM](INFO): Initializing
2018-03-19T19:48:59.880Z,1521488939.880 [Rowe_600LCM](INFO): Checking LCM
2018-03-19T19:48:59.880Z,1521488939.880 [Rowe_600LCM](INFO): LCM OK
2018-03-19T19:48:59.881Z,1521488939.881 [Rowe_600LCM](INFO): Powering up
2018-03-19T19:49:03.998Z,1521488943.998 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-03-19T19:49:04.059Z,1521488944.059 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2018-03-19T19:49:04.060Z,1521488944.060 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-03-19T19:49:04.061Z,1521488944.061 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-03-19T19:49:04.062Z,1521488944.062 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-03-19T19:50:58.039Z,1521489058.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:50:58.743Z,1521489058.743 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:50:59.539Z,1521489059.539 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:00.336Z,1521489060.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:00.755Z,1521489060.755 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:01.551Z,1521489061.551 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:02.195Z,1521489062.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:02.991Z,1521489062.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:03.788Z,1521489063.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:04.199Z,1521489064.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:04.995Z,1521489064.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:05.793Z,1521489065.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:06.211Z,1521489066.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:07.007Z,1521489067.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:07.804Z,1521489067.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:08.315Z,1521489068.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:09.111Z,1521489069.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:09.919Z,1521489069.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:10.447Z,1521489070.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:11.243Z,1521489071.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:12.039Z,1521489072.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:12.751Z,1521489072.751 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:13.547Z,1521489073.547 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:14.343Z,1521489074.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:14.763Z,1521489074.763 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:15.560Z,1521489075.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:16.191Z,1521489076.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:16.987Z,1521489076.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:17.784Z,1521489077.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:18.199Z,1521489078.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:18.995Z,1521489078.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:19.794Z,1521489079.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:20.211Z,1521489080.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:21.007Z,1521489081.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:21.804Z,1521489081.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:22.271Z,1521489082.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:23.067Z,1521489083.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:23.863Z,1521489083.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:24.453Z,1521489084.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:25.247Z,1521489085.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:26.043Z,1521489086.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:26.764Z,1521489086.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:27.559Z,1521489087.559 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:28.363Z,1521489088.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:28.767Z,1521489088.767 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:29.563Z,1521489089.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:30.195Z,1521489090.195 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:30.991Z,1521489090.991 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:31.788Z,1521489091.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:32.199Z,1521489092.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:32.995Z,1521489092.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:33.792Z,1521489093.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:34.207Z,1521489094.207 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:35.003Z,1521489095.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:35.800Z,1521489095.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:36.299Z,1521489096.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:37.095Z,1521489097.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:37.891Z,1521489097.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:38.451Z,1521489098.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:39.247Z,1521489099.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:40.044Z,1521489100.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:40.739Z,1521489100.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:41.535Z,1521489101.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:42.332Z,1521489102.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:42.735Z,1521489102.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:43.531Z,1521489103.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:44.183Z,1521489104.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:44.979Z,1521489104.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:45.776Z,1521489105.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:46.187Z,1521489106.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:46.983Z,1521489106.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:47.780Z,1521489107.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:48.206Z,1521489108.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:49.007Z,1521489109.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:49.807Z,1521489109.807 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:50.247Z,1521489110.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:51.043Z,1521489111.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:51.839Z,1521489111.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:52.487Z,1521489112.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:53.283Z,1521489113.283 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:54.079Z,1521489114.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:54.731Z,1521489114.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:55.528Z,1521489115.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:56.324Z,1521489116.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:56.731Z,1521489116.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:57.527Z,1521489117.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:58.037Z,1521489118.037 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:51:58.037Z,1521489118.037 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-03-19T19:51:58.037Z,1521489118.037 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T19:51:58.039Z,1521489118.039 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:51:58.039Z,1521489118.039 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-19T19:51:58.039Z,1521489118.039 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T19:51:58.051Z,1521489118.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T19:51:58.052Z,1521489118.052 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T19:51:58.187Z,1521489118.187 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:58.463Z,1521489118.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T19:51:58.463Z,1521489118.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-03-19T19:51:58.463Z,1521489118.463 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T19:51:58.463Z,1521489118.463 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-19T19:51:58.819Z,1521489118.819 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:51:58.819Z,1521489118.819 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:51:58.820Z,1521489118.820 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:51:58.820Z,1521489118.820 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:51:58.820Z,1521489118.820 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:51:58.821Z,1521489118.821 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:51:58.983Z,1521489118.983 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:51:59.786Z,1521489119.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:00.199Z,1521489120.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:00.995Z,1521489120.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:01.794Z,1521489121.794 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:02.203Z,1521489122.203 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:02.999Z,1521489122.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:03.796Z,1521489123.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:04.253Z,1521489124.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:05.047Z,1521489125.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:05.843Z,1521489125.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:06.471Z,1521489126.471 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:07.267Z,1521489127.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:08.063Z,1521489128.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:08.727Z,1521489128.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:09.523Z,1521489129.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:10.320Z,1521489130.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:10.731Z,1521489130.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:11.527Z,1521489131.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:12.183Z,1521489132.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:12.979Z,1521489132.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:13.777Z,1521489133.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:14.191Z,1521489134.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:14.987Z,1521489134.987 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:15.784Z,1521489135.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:16.199Z,1521489136.199 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:16.995Z,1521489136.995 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:17.792Z,1521489137.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:18.252Z,1521489138.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:19.047Z,1521489139.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:19.845Z,1521489139.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:20.479Z,1521489140.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:21.275Z,1521489141.275 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:22.071Z,1521489142.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:22.735Z,1521489142.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:23.531Z,1521489143.531 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:24.328Z,1521489144.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:24.735Z,1521489144.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:40.899Z,1521489160.899 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-19T19:47:39.2Z
2018-03-19T19:52:40.899Z,1521489160.899 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T19:52:40.899Z,1521489160.899 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T19:52:45.781Z,1521489165.781 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180319T193343/Courier0008.lzma
2018-03-19T19:52:46.579Z,1521489166.579 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0008.lzma.bak
2018-03-19T19:52:46.579Z,1521489166.579 [DataOverHttps](INFO): SBD MOMSN=8138291
2018-03-19T19:52:48.447Z,1521489168.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:49.243Z,1521489169.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:50.039Z,1521489170.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:50.739Z,1521489170.739 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:51.535Z,1521489171.535 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:52.332Z,1521489172.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:52.735Z,1521489172.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:52:56.010Z,1521489176.010 [DataOverHttps](INFO): Sending 298 bytes from file Logs/20180319T193343/Express0009.lzma
2018-03-19T19:52:56.807Z,1521489176.807 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0009.lzma.bak
2018-03-19T19:52:56.807Z,1521489176.807 [DataOverHttps](INFO): SBD MOMSN=8138293
2018-03-19T19:52:57.263Z,1521489177.263 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T19:52:57.263Z,1521489177.263 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T19:52:57.263Z,1521489177.263 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T19:53:02.455Z,1521489182.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:53:03.251Z,1521489183.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T19:53:53.433Z,1521489233.433 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T19:55:01.170Z,1521489301.170 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:55:01.170Z,1521489301.170 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-03-19T19:55:01.170Z,1521489301.170 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T19:55:01.172Z,1521489301.172 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:55:01.172Z,1521489301.172 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-03-19T19:55:01.172Z,1521489301.172 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T19:55:01.204Z,1521489301.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T19:55:01.205Z,1521489301.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T19:55:01.333Z,1521489301.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T19:55:01.333Z,1521489301.333 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-03-19T19:55:01.333Z,1521489301.333 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T19:55:01.333Z,1521489301.333 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-03-19T19:55:01.674Z,1521489301.674 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:55:01.675Z,1521489301.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:55:01.675Z,1521489301.675 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:55:01.675Z,1521489301.675 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:55:01.676Z,1521489301.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:55:01.676Z,1521489301.676 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:55:16.820Z,1521489316.820 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-19T19:55:16.820Z,1521489316.820 [NAL9602] Data Fault, FailCount= 2
2018-03-19T19:55:16.820Z,1521489316.820 [NAL9602](ERROR): Data Fault
2018-03-19T19:55:16.906Z,1521489316.906 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-19T19:55:17.216Z,1521489317.216 [NAL9602](INFO): Powering down
2018-03-19T19:55:18.087Z,1521489318.087 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-19T19:55:18.087Z,1521489318.087 [NAL9602] No Fault, FailCount= 2
2018-03-19T19:55:47.220Z,1521489347.220 [NAL9602](INFO): Powering up NAL9602
2018-03-19T19:55:58.424Z,1521489358.424 [NAL9602](INFO): NAL9602 initialized
2018-03-19T19:57:57.964Z,1521489477.964 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T19:57:57.965Z,1521489477.965 [Default:CheckIn:C.Wait] Stopped
2018-03-19T19:57:57.965Z,1521489477.965 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T19:57:57.965Z,1521489477.965 [Default:CheckIn:D] Running Loop=1
2018-03-19T19:57:58.385Z,1521489478.385 [Default:CheckIn:D] Stopped
2018-03-19T19:57:58.385Z,1521489478.385 [Default:CheckIn:E] Running Loop=1
2018-03-19T19:58:01.540Z,1521489481.540 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.880241 min 
2018-03-19T19:58:01.541Z,1521489481.541 [Default:CheckIn:E] Stopped
2018-03-19T19:58:01.541Z,1521489481.541 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T19:58:01.541Z,1521489481.541 [Default:CheckIn] Stopped
2018-03-19T19:58:01.541Z,1521489481.541 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T19:58:01.541Z,1521489481.541 [Default:CheckIn](INFO): Running loop #3
2018-03-19T19:58:01.541Z,1521489481.541 [Default:CheckIn] Running Loop=3
2018-03-19T19:58:01.541Z,1521489481.541 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T19:58:01.541Z,1521489481.541 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T19:58:01.690Z,1521489481.690 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:58:01.690Z,1521489481.690 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-03-19T19:58:01.690Z,1521489481.690 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T19:58:01.692Z,1521489481.692 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T19:58:01.692Z,1521489481.692 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-03-19T19:58:01.692Z,1521489481.692 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T19:58:01.769Z,1521489481.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T19:58:01.770Z,1521489481.770 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T19:58:02.103Z,1521489482.103 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T19:58:02.103Z,1521489482.103 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-03-19T19:58:02.104Z,1521489482.103 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T19:58:02.104Z,1521489482.104 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-03-19T19:58:02.495Z,1521489482.495 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T19:58:02.495Z,1521489482.495 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:58:02.496Z,1521489482.496 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:58:02.496Z,1521489482.496 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T19:58:02.497Z,1521489482.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T19:58:02.497Z,1521489482.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T19:58:06.594Z,1521489486.594 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2018-03-19T19:58:06.594Z,1521489486.594 [Rowe_600LCM] Communications Fault, FailCount= 5
2018-03-19T19:58:06.595Z,1521489486.595 [Rowe_600LCM](ERROR): Communications Fault
2018-03-19T19:58:06.892Z,1521489486.892 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2018-03-19T19:58:06.903Z,1521489486.903 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2018-03-19T19:58:06.999Z,1521489486.999 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2018-03-19T19:58:07.090Z,1521489487.090 [Rowe_600LCM](INFO): Powering down
2018-03-19T20:01:03.406Z,1521489663.406 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T20:01:03.406Z,1521489663.406 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-03-19T20:01:03.406Z,1521489663.406 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-03-19T20:01:03.408Z,1521489663.408 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T20:01:03.408Z,1521489663.408 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-03-19T20:01:03.408Z,1521489663.408 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T20:01:03.448Z,1521489663.448 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-03-19T20:01:03.448Z,1521489663.448 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T20:01:03.565Z,1521489663.565 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-03-19T20:01:03.566Z,1521489663.566 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-03-19T20:01:03.566Z,1521489663.566 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T20:01:03.566Z,1521489663.566 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-03-19T20:01:03.927Z,1521489663.927 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-03-19T20:01:03.927Z,1521489663.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T20:01:03.927Z,1521489663.927 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T20:01:03.928Z,1521489663.928 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T20:01:03.928Z,1521489663.928 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T20:01:03.929Z,1521489663.929 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T20:01:08.792Z,1521489668.792 [CommandLine](IMPORTANT): got command report mod platform_buoyancy_position
2018-03-19T20:01:09.117Z,1521489669.117 [Reporter](INFO): platform_buoyancy_position 947.879395 cc
2018-03-19T20:01:21.946Z,1521489681.946 [CommandLine](IMPORTANT): got command maintain control VerticalControl.buoyancyAction 200.000000 cubic_centimeter
2018-03-19T20:01:21.947Z,1521489681.947 [ComponentRegistry](DEBUG): SyncComponent "Maintain_VerticalControl.buoyancyAction" handled in the control thread.
2018-03-19T20:01:22.354Z,1521489682.354 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,Aanderaa_O2,CANONSampler,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,ElevatorOffsetCalculator,StratificationFrontDetector,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,Maintain_VerticalControl.buoyancyAction,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-03-19T20:01:27.185Z,1521489687.185 [Reporter](INFO): platform_buoyancy_position 947.610708 cc
2018-03-19T20:01:27.561Z,1521489687.561 [Reporter](INFO): platform_buoyancy_position 948.013680 cc
2018-03-19T20:01:27.974Z,1521489687.974 [Reporter](INFO): platform_buoyancy_position 945.730601 cc
2018-03-19T20:01:28.353Z,1521489688.353 [Reporter](INFO): platform_buoyancy_position 941.567239 cc
2018-03-19T20:01:28.742Z,1521489688.742 [Reporter](INFO): platform_buoyancy_position 939.015532 cc
2018-03-19T20:01:29.157Z,1521489689.157 [Reporter](INFO): platform_buoyancy_position 932.972063 cc
2018-03-19T20:01:29.557Z,1521489689.557 [Reporter](INFO): platform_buoyancy_position 928.540190 cc
2018-03-19T20:01:29.958Z,1521489689.958 [Reporter](INFO): platform_buoyancy_position 924.242544 cc
2018-03-19T20:01:30.358Z,1521489690.358 [Reporter](INFO): platform_buoyancy_position 917.930447 cc
2018-03-19T20:01:30.758Z,1521489690.758 [Reporter](INFO): platform_buoyancy_position 913.364231 cc
2018-03-19T20:01:31.165Z,1521489691.165 [Reporter](INFO): platform_buoyancy_position 907.052134 cc
2018-03-19T20:01:31.570Z,1521489691.570 [Reporter](INFO): platform_buoyancy_position 902.888831 cc
2018-03-19T20:01:31.957Z,1521489691.957 [Reporter](INFO): platform_buoyancy_position 897.113932 cc
2018-03-19T20:01:32.342Z,1521489692.342 [Reporter](INFO): platform_buoyancy_position 892.144861 cc
2018-03-19T20:01:32.761Z,1521489692.761 [Reporter](INFO): platform_buoyancy_position 887.578703 cc
2018-03-19T20:01:33.165Z,1521489693.165 [Reporter](INFO): platform_buoyancy_position 881.400832 cc
2018-03-19T20:01:33.569Z,1521489693.569 [Reporter](INFO): platform_buoyancy_position 876.968959 cc
2018-03-19T20:01:33.973Z,1521489693.973 [Reporter](INFO): platform_buoyancy_position 870.656862 cc
2018-03-19T20:01:34.354Z,1521489694.354 [Reporter](INFO): platform_buoyancy_position 866.224931 cc
2018-03-19T20:01:34.753Z,1521489694.753 [Reporter](INFO): platform_buoyancy_position 861.927343 cc
2018-03-19T20:01:35.180Z,1521489695.180 [Reporter](INFO): platform_buoyancy_position 855.480961 cc
2018-03-19T20:01:35.546Z,1521489695.546 [Reporter](INFO): platform_buoyancy_position 851.183373 cc
2018-03-19T20:01:35.969Z,1521489695.969 [Reporter](INFO): platform_buoyancy_position 844.871218 cc
2018-03-19T20:01:36.402Z,1521489696.402 [Reporter](INFO): platform_buoyancy_position 838.559121 cc
2018-03-19T20:01:36.762Z,1521489696.762 [Reporter](INFO): platform_buoyancy_position 833.992905 cc
2018-03-19T20:01:37.170Z,1521489697.170 [Reporter](INFO): platform_buoyancy_position 829.561031 cc
2018-03-19T20:01:37.557Z,1521489697.557 [Reporter](INFO): platform_buoyancy_position 823.383220 cc
2018-03-19T20:01:37.970Z,1521489697.970 [Reporter](INFO): platform_buoyancy_position 818.951346 cc
2018-03-19T20:01:38.371Z,1521489698.371 [Reporter](INFO): platform_buoyancy_position 812.639249 cc
2018-03-19T20:01:38.771Z,1521489698.771 [Reporter](INFO): platform_buoyancy_position 808.207318 cc
2018-03-19T20:01:39.167Z,1521489699.167 [Reporter](INFO): platform_buoyancy_position 802.566705 cc
2018-03-19T20:01:39.562Z,1521489699.562 [Reporter](INFO): platform_buoyancy_position 797.463290 cc
2018-03-19T20:01:39.981Z,1521489699.981 [Reporter](INFO): platform_buoyancy_position 791.285536 cc
2018-03-19T20:01:40.397Z,1521489700.397 [Reporter](INFO): platform_buoyancy_position 786.719378 cc
2018-03-19T20:01:40.755Z,1521489700.755 [Reporter](INFO): platform_buoyancy_position 782.421732 cc
2018-03-19T20:01:41.170Z,1521489701.170 [Reporter](INFO): platform_buoyancy_position 776.109635 cc
2018-03-19T20:01:41.550Z,1521489701.550 [Reporter](INFO): platform_buoyancy_position 771.677762 cc
2018-03-19T20:01:41.958Z,1521489701.958 [Reporter](INFO): platform_buoyancy_position 765.365665 cc
2018-03-19T20:01:42.377Z,1521489702.377 [Reporter](INFO): platform_buoyancy_position 761.068077 cc
2018-03-19T20:01:42.753Z,1521489702.753 [Reporter](INFO): platform_buoyancy_position 756.636087 cc
2018-03-19T20:01:43.219Z,1521489703.219 [Reporter](INFO): platform_buoyancy_position 750.189763 cc
2018-03-19T20:01:43.374Z,1521489703.374 [CommandLine](IMPORTANT): got command get VerticalControl.buoyancyNeutral
2018-03-19T20:01:43.375Z,1521489703.375 [CommandLine](IMPORTANT): VerticalControl.buoyancyNeutral 315.000012 cc
2018-03-19T20:01:43.584Z,1521489703.584 [Reporter](INFO): platform_buoyancy_position 745.892175 cc
2018-03-19T20:01:43.946Z,1521489703.946 [Reporter](INFO): platform_buoyancy_position 739.580020 cc
2018-03-19T20:01:44.341Z,1521489704.341 [Reporter](INFO): platform_buoyancy_position 735.148147 cc
2018-03-19T20:01:44.759Z,1521489704.759 [Reporter](INFO): platform_buoyancy_position 729.776104 cc
2018-03-19T20:01:45.153Z,1521489705.153 [Reporter](INFO): platform_buoyancy_position 724.404119 cc
2018-03-19T20:01:45.558Z,1521489705.558 [Reporter](INFO): platform_buoyancy_position 718.897849 cc
2018-03-19T20:01:45.965Z,1521489705.965 [Reporter](INFO): platform_buoyancy_position 713.794434 cc
2018-03-19T20:01:46.361Z,1521489706.361 [Reporter](INFO): platform_buoyancy_position 709.362561 cc
2018-03-19T20:01:46.757Z,1521489706.757 [Reporter](INFO): platform_buoyancy_position 703.050406 cc
2018-03-19T20:01:47.173Z,1521489707.173 [Reporter](INFO): platform_buoyancy_position 698.081334 cc
2018-03-19T20:01:47.537Z,1521489707.537 [Reporter](INFO): platform_buoyancy_position 692.306436 cc
2018-03-19T20:01:47.962Z,1521489707.962 [Reporter](INFO): platform_buoyancy_position 687.874504 cc
2018-03-19T20:01:48.349Z,1521489708.349 [Reporter](INFO): platform_buoyancy_position 682.368234 cc
2018-03-19T20:01:48.754Z,1521489708.754 [Reporter](INFO): platform_buoyancy_position 677.264819 cc
2018-03-19T20:01:49.165Z,1521489709.165 [Reporter](INFO): platform_buoyancy_position 670.818437 cc
2018-03-19T20:01:49.565Z,1521489709.565 [Reporter](INFO): platform_buoyancy_position 666.386564 cc
2018-03-19T20:01:49.958Z,1521489709.958 [Reporter](INFO): platform_buoyancy_position 662.088918 cc
2018-03-19T20:01:50.373Z,1521489710.373 [Reporter](INFO): platform_buoyancy_position 655.776879 cc
2018-03-19T20:01:50.741Z,1521489710.741 [Reporter](INFO): platform_buoyancy_position 651.344890 cc
2018-03-19T20:01:51.165Z,1521489711.165 [Reporter](INFO): platform_buoyancy_position 644.898508 cc
2018-03-19T20:01:51.542Z,1521489711.542 [Reporter](INFO): platform_buoyancy_position 640.600978 cc
2018-03-19T20:01:51.973Z,1521489711.973 [Reporter](INFO): platform_buoyancy_position 634.154538 cc
2018-03-19T20:01:52.361Z,1521489712.361 [Reporter](INFO): platform_buoyancy_position 629.856950 cc
2018-03-19T20:01:52.745Z,1521489712.745 [Reporter](INFO): platform_buoyancy_position 624.484906 cc
2018-03-19T20:01:53.145Z,1521489713.145 [Reporter](INFO): platform_buoyancy_position 619.247265 cc
2018-03-19T20:01:53.546Z,1521489713.546 [Reporter](INFO): platform_buoyancy_position 614.681048 cc
2018-03-19T20:01:53.950Z,1521489713.950 [Reporter](INFO): platform_buoyancy_position 608.368893 cc
2018-03-19T20:01:54.349Z,1521489714.349 [Reporter](INFO): platform_buoyancy_position 604.071363 cc
2018-03-19T20:01:54.762Z,1521489714.762 [Reporter](INFO): platform_buoyancy_position 597.624923 cc
2018-03-19T20:01:55.158Z,1521489715.158 [Reporter](INFO): platform_buoyancy_position 593.461620 cc
2018-03-19T20:01:55.565Z,1521489715.565 [Reporter](INFO): platform_buoyancy_position 589.029747 cc
2018-03-19T20:01:55.961Z,1521489715.961 [Reporter](INFO): platform_buoyancy_position 582.717650 cc
2018-03-19T20:01:56.354Z,1521489716.354 [Reporter](INFO): platform_buoyancy_position 578.151434 cc
2018-03-19T20:01:56.745Z,1521489716.745 [Reporter](INFO): platform_buoyancy_position 571.839279 cc
2018-03-19T20:01:57.153Z,1521489717.153 [Reporter](INFO): platform_buoyancy_position 567.273120 cc
2018-03-19T20:01:57.546Z,1521489717.546 [Reporter](INFO): platform_buoyancy_position 561.229594 cc
2018-03-19T20:01:57.977Z,1521489717.977 [Reporter](INFO): platform_buoyancy_position 554.783212 cc
2018-03-19T20:01:58.373Z,1521489718.373 [Reporter](INFO): platform_buoyancy_position 550.351338 cc
2018-03-19T20:01:58.745Z,1521489718.745 [Reporter](INFO): platform_buoyancy_position 546.053692 cc
2018-03-19T20:01:59.149Z,1521489719.149 [Reporter](INFO): platform_buoyancy_position 539.741653 cc
2018-03-19T20:02:02.289Z,1521489722.289 [Reporter](INFO): platform_buoyancy_position 498.914451 cc
2018-03-19T20:02:02.431Z,1521489722.431 [Reporter](INFO): platform_buoyancy_position 496.765657 cc
2018-03-19T20:02:02.801Z,1521489722.801 [Reporter](INFO): platform_buoyancy_position 492.468069 cc
2018-03-19T20:02:03.206Z,1521489723.206 [Reporter](INFO): platform_buoyancy_position 488.036167 cc
2018-03-19T20:02:03.606Z,1521489723.606 [Reporter](INFO): platform_buoyancy_position 481.724041 cc
2018-03-19T20:02:04.012Z,1521489724.012 [Reporter](INFO): platform_buoyancy_position 477.292138 cc
2018-03-19T20:02:04.403Z,1521489724.403 [Reporter](INFO): platform_buoyancy_position 470.980071 cc
2018-03-19T20:02:04.801Z,1521489724.801 [Reporter](INFO): platform_buoyancy_position 466.682453 cc
2018-03-19T20:02:05.211Z,1521489725.211 [Reporter](INFO): platform_buoyancy_position 460.773212 cc
2018-03-19T20:02:05.606Z,1521489725.606 [Reporter](INFO): platform_buoyancy_position 455.804169 cc
2018-03-19T20:02:06.002Z,1521489726.002 [Reporter](INFO): platform_buoyancy_position 451.506552 cc
2018-03-19T20:02:06.409Z,1521489726.409 [Reporter](INFO): platform_buoyancy_position 446.134538 cc
2018-03-19T20:02:06.809Z,1521489726.809 [Reporter](INFO): platform_buoyancy_position 440.896809 cc
2018-03-19T20:02:07.201Z,1521489727.201 [Reporter](INFO): platform_buoyancy_position 434.450456 cc
2018-03-19T20:02:07.609Z,1521489727.609 [Reporter](INFO): platform_buoyancy_position 430.018525 cc
2018-03-19T20:02:08.009Z,1521489728.009 [Reporter](INFO): platform_buoyancy_position 424.915139 cc
2018-03-19T20:02:08.397Z,1521489728.397 [Reporter](INFO): platform_buoyancy_position 419.408840 cc
2018-03-19T20:02:08.809Z,1521489728.809 [Reporter](INFO): platform_buoyancy_position 414.439739 cc
2018-03-19T20:02:09.197Z,1521489729.197 [Reporter](INFO): platform_buoyancy_position 408.530555 cc
2018-03-19T20:02:09.597Z,1521489729.597 [Reporter](INFO): platform_buoyancy_position 404.098624 cc
2018-03-19T20:02:09.997Z,1521489729.997 [Reporter](INFO): platform_buoyancy_position 397.920841 cc
2018-03-19T20:02:10.394Z,1521489730.394 [Reporter](INFO): platform_buoyancy_position 393.488939 cc
2018-03-19T20:02:10.801Z,1521489730.801 [Reporter](INFO): platform_buoyancy_position 387.042528 cc
2018-03-19T20:02:11.205Z,1521489731.205 [Reporter](INFO): platform_buoyancy_position 382.744940 cc
2018-03-19T20:02:11.606Z,1521489731.606 [Reporter](INFO): platform_buoyancy_position 376.298558 cc
2018-03-19T20:02:12.021Z,1521489732.021 [Reporter](INFO): platform_buoyancy_position 372.000941 cc
2018-03-19T20:02:12.406Z,1521489732.406 [Reporter](INFO): platform_buoyancy_position 365.823158 cc
2018-03-19T20:02:12.789Z,1521489732.789 [Reporter](INFO): platform_buoyancy_position 361.391227 cc
2018-03-19T20:02:13.189Z,1521489733.189 [Reporter](INFO): platform_buoyancy_position 356.959354 cc
2018-03-19T20:02:13.613Z,1521489733.613 [Reporter](INFO): platform_buoyancy_position 350.647257 cc
2018-03-19T20:02:14.009Z,1521489734.009 [Reporter](INFO): platform_buoyancy_position 346.215325 cc
2018-03-19T20:02:14.389Z,1521489734.389 [Reporter](INFO): platform_buoyancy_position 340.037543 cc
2018-03-19T20:02:14.825Z,1521489734.825 [Reporter](INFO): platform_buoyancy_position 335.471355 cc
2018-03-19T20:02:15.194Z,1521489735.194 [Reporter](INFO): platform_buoyancy_position 330.636540 cc
2018-03-19T20:02:15.605Z,1521489735.605 [Reporter](INFO): platform_buoyancy_position 324.861641 cc
2018-03-19T20:02:15.997Z,1521489735.997 [Reporter](INFO): platform_buoyancy_position 320.429739 cc
2018-03-19T20:02:16.386Z,1521489736.386 [Reporter](INFO): platform_buoyancy_position 314.251927 cc
2018-03-19T20:02:16.798Z,1521489736.798 [Reporter](INFO): platform_buoyancy_position 309.685740 cc
2018-03-19T20:02:17.213Z,1521489737.213 [Reporter](INFO): platform_buoyancy_position 303.373614 cc
2018-03-19T20:02:17.601Z,1521489737.601 [Reporter](INFO): platform_buoyancy_position 298.941741 cc
2018-03-19T20:02:18.002Z,1521489738.002 [Reporter](INFO): platform_buoyancy_position 292.629644 cc
2018-03-19T20:02:18.409Z,1521489738.409 [Reporter](INFO): platform_buoyancy_position 288.197713 cc
2018-03-19T20:02:18.781Z,1521489738.781 [Reporter](INFO): platform_buoyancy_position 283.094327 cc
2018-03-19T20:02:19.178Z,1521489739.178 [Reporter](INFO): platform_buoyancy_position 277.588057 cc
2018-03-19T20:02:19.605Z,1521489739.605 [Reporter](INFO): platform_buoyancy_position 272.753241 cc
2018-03-19T20:02:19.998Z,1521489739.998 [Reporter](INFO): platform_buoyancy_position 266.709714 cc
2018-03-19T20:02:20.390Z,1521489740.390 [Reporter](INFO): platform_buoyancy_position 262.412126 cc
2018-03-19T20:02:20.794Z,1521489740.794 [Reporter](INFO): platform_buoyancy_position 256.100029 cc
2018-03-19T20:02:21.205Z,1521489741.205 [Reporter](INFO): platform_buoyancy_position 251.668127 cc
2018-03-19T20:02:21.599Z,1521489741.599 [Reporter](INFO): platform_buoyancy_position 245.356030 cc
2018-03-19T20:02:21.997Z,1521489741.997 [Reporter](INFO): platform_buoyancy_position 240.924128 cc
2018-03-19T20:02:22.411Z,1521489742.411 [Reporter](INFO): platform_buoyancy_position 234.746345 cc
2018-03-19T20:02:22.828Z,1521489742.828 [Reporter](INFO): platform_buoyancy_position 230.180114 cc
2018-03-19T20:02:23.218Z,1521489743.218 [Reporter](INFO): platform_buoyancy_position 223.733732 cc
2018-03-19T20:02:23.617Z,1521489743.617 [Reporter](INFO): platform_buoyancy_position 219.436130 cc
2018-03-19T20:02:24.050Z,1521489744.050 [Reporter](INFO): platform_buoyancy_position 213.124018 cc
2018-03-19T20:02:24.445Z,1521489744.445 [Reporter](INFO): platform_buoyancy_position 208.826415 cc
2018-03-19T20:03:03.460Z,1521489783.460 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-19T19:58:01.5Z
2018-03-19T20:03:03.460Z,1521489783.460 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:03:03.460Z,1521489783.460 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:03:08.271Z,1521489788.271 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180319T193343/Courier0012.lzma
2018-03-19T20:03:09.071Z,1521489789.071 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0012.lzma.bak
2018-03-19T20:03:09.072Z,1521489789.072 [DataOverHttps](INFO): SBD MOMSN=8138389
2018-03-19T20:03:18.242Z,1521489798.242 [DataOverHttps](INFO): Sending 380 bytes from file Logs/20180319T193343/Express0013.lzma
2018-03-19T20:03:19.011Z,1521489799.011 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0013.lzma.bak
2018-03-19T20:03:19.011Z,1521489799.011 [DataOverHttps](INFO): SBD MOMSN=8138391
2018-03-19T20:03:19.489Z,1521489799.489 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:03:19.490Z,1521489799.490 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:03:19.490Z,1521489799.490 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:03:53.487Z,1521489833.487 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T20:03:57.025Z,1521489837.025 [NAL9602](INFO): GPS fix at 20180319T200356: (36.802861, -121.787868)
2018-03-19T20:04:04.264Z,1521489844.264 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T20:04:04.264Z,1521489844.264 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-03-19T20:04:04.264Z,1521489844.264 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T20:04:04.277Z,1521489844.277 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T20:04:04.679Z,1521489844.679 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T20:04:04.679Z,1521489844.679 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-03-19T20:04:05.065Z,1521489845.065 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T20:04:05.065Z,1521489845.065 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T20:04:05.065Z,1521489845.065 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T20:04:29.144Z,1521489869.144 [NAL9602](INFO): Powering down
2018-03-19T20:07:05.178Z,1521490025.178 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T20:07:05.178Z,1521490025.178 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-03-19T20:07:05.178Z,1521490025.178 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T20:07:05.207Z,1521490025.207 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T20:07:05.576Z,1521490025.576 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T20:07:05.577Z,1521490025.577 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-03-19T20:07:05.965Z,1521490025.965 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T20:07:05.966Z,1521490025.966 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T20:07:05.966Z,1521490025.966 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T20:08:06.798Z,1521490086.798 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2018-03-19T20:08:06.798Z,1521490086.798 [Rowe_600LCM] No Fault, FailCount= 5
2018-03-19T20:08:06.967Z,1521490086.967 [Rowe_600LCM](INFO): Initializing
2018-03-19T20:08:06.967Z,1521490086.967 [Rowe_600LCM](INFO): Checking LCM
2018-03-19T20:08:06.967Z,1521490086.967 [Rowe_600LCM](INFO): LCM OK
2018-03-19T20:08:06.967Z,1521490086.967 [Rowe_600LCM](INFO): Powering up
2018-03-19T20:08:11.090Z,1521490091.090 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2018-03-19T20:08:11.229Z,1521490091.229 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2018-03-19T20:08:11.230Z,1521490091.230 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2018-03-19T20:08:11.231Z,1521490091.231 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2018-03-19T20:08:11.232Z,1521490091.232 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2018-03-19T20:08:19.969Z,1521490099.969 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T20:08:19.969Z,1521490099.969 [Default:CheckIn:C.Wait] Stopped
2018-03-19T20:08:19.969Z,1521490099.969 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:08:19.969Z,1521490099.969 [Default:CheckIn:D] Running Loop=1
2018-03-19T20:08:20.398Z,1521490100.398 [Default:CheckIn:D] Stopped
2018-03-19T20:08:20.398Z,1521490100.398 [Default:CheckIn:E] Running Loop=1
2018-03-19T20:08:20.831Z,1521490100.831 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.247113 min 
2018-03-19T20:08:20.831Z,1521490100.831 [Default:CheckIn:E] Stopped
2018-03-19T20:08:20.831Z,1521490100.831 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T20:08:20.831Z,1521490100.831 [Default:CheckIn] Stopped
2018-03-19T20:08:20.831Z,1521490100.831 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T20:08:20.832Z,1521490100.832 [Default:CheckIn](INFO): Running loop #4
2018-03-19T20:08:20.832Z,1521490100.832 [Default:CheckIn] Running Loop=4
2018-03-19T20:08:20.832Z,1521490100.832 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T20:08:20.832Z,1521490100.832 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T20:08:25.452Z,1521490105.452 [NAL9602](INFO): Powering up
2018-03-19T20:08:36.604Z,1521490116.604 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:09:07.193Z,1521490147.193 [CommandLine](IMPORTANT): got command maintain control VerticalControl.buoyancyAction 300.000000 cubic_centimeter
2018-03-19T20:09:11.933Z,1521490151.933 [Reporter](INFO): platform_buoyancy_position 204.394528 cc
2018-03-19T20:09:12.290Z,1521490152.290 [Reporter](INFO): platform_buoyancy_position 202.245734 cc
2018-03-19T20:09:12.689Z,1521490152.689 [Reporter](INFO): platform_buoyancy_position 203.454430 cc
2018-03-19T20:09:13.106Z,1521490153.106 [Reporter](INFO): platform_buoyancy_position 204.394528 cc
2018-03-19T20:09:13.909Z,1521490153.909 [Reporter](INFO): platform_buoyancy_position 206.543336 cc
2018-03-19T20:09:14.677Z,1521490154.677 [Reporter](INFO): platform_buoyancy_position 208.692145 cc
2018-03-19T20:09:15.102Z,1521490155.102 [Reporter](INFO): platform_buoyancy_position 210.840910 cc
2018-03-19T20:09:15.505Z,1521490155.505 [Reporter](INFO): platform_buoyancy_position 210.975224 cc
2018-03-19T20:09:15.885Z,1521490155.885 [Reporter](INFO): platform_buoyancy_position 212.855433 cc
2018-03-19T20:09:16.285Z,1521490156.285 [Reporter](INFO): platform_buoyancy_position 213.124018 cc
2018-03-19T20:09:16.692Z,1521490156.692 [Reporter](INFO): platform_buoyancy_position 215.138512 cc
2018-03-19T20:09:17.094Z,1521490157.094 [Reporter](INFO): platform_buoyancy_position 215.541411 cc
2018-03-19T20:09:17.502Z,1521490157.502 [Reporter](INFO): platform_buoyancy_position 217.421635 cc
2018-03-19T20:09:17.945Z,1521490157.945 [Reporter](INFO): platform_buoyancy_position 219.570429 cc
2018-03-19T20:09:18.685Z,1521490158.685 [Reporter](INFO): platform_buoyancy_position 221.719238 cc
2018-03-19T20:09:19.085Z,1521490159.085 [Reporter](INFO): platform_buoyancy_position 223.733732 cc
2018-03-19T20:09:19.897Z,1521490159.897 [Reporter](INFO): platform_buoyancy_position 225.882541 cc
2018-03-19T20:09:20.305Z,1521490160.305 [Reporter](INFO): platform_buoyancy_position 226.956938 cc
2018-03-19T20:09:20.697Z,1521490160.697 [Reporter](INFO): platform_buoyancy_position 228.165620 cc
2018-03-19T20:09:21.113Z,1521490161.113 [Reporter](INFO): platform_buoyancy_position 230.314428 cc
2018-03-19T20:09:24.373Z,1521490164.373 [Reporter](INFO): platform_buoyancy_position 240.924128 cc
2018-03-19T20:09:24.882Z,1521490164.882 [Reporter](INFO): platform_buoyancy_position 241.192713 cc
2018-03-19T20:09:25.345Z,1521490165.345 [Reporter](INFO): platform_buoyancy_position 243.072936 cc
2018-03-19T20:09:25.689Z,1521490165.689 [Reporter](INFO): platform_buoyancy_position 245.221745 cc
2018-03-19T20:09:26.093Z,1521490166.093 [Reporter](INFO): platform_buoyancy_position 245.356030 cc
2018-03-19T20:09:26.497Z,1521490166.497 [Reporter](INFO): platform_buoyancy_position 247.370539 cc
2018-03-19T20:09:26.902Z,1521490166.902 [Reporter](INFO): platform_buoyancy_position 248.176337 cc
2018-03-19T20:09:27.338Z,1521490167.338 [Reporter](INFO): platform_buoyancy_position 249.653618 cc
2018-03-19T20:09:27.694Z,1521490167.694 [Reporter](INFO): platform_buoyancy_position 251.668127 cc
2018-03-19T20:09:28.085Z,1521490168.085 [Reporter](INFO): platform_buoyancy_position 251.802441 cc
2018-03-19T20:09:28.486Z,1521490168.486 [Reporter](INFO): platform_buoyancy_position 253.816921 cc
2018-03-19T20:09:28.906Z,1521490168.906 [Reporter](INFO): platform_buoyancy_position 255.965715 cc
2018-03-19T20:09:29.342Z,1521490169.342 [Reporter](INFO): platform_buoyancy_position 256.100029 cc
2018-03-19T20:09:29.685Z,1521490169.685 [Reporter](INFO): platform_buoyancy_position 258.114538 cc
2018-03-19T20:09:30.086Z,1521490170.086 [Reporter](INFO): platform_buoyancy_position 258.248852 cc
2018-03-19T20:09:30.486Z,1521490170.486 [Reporter](INFO): platform_buoyancy_position 260.397646 cc
2018-03-19T20:09:30.870Z,1521490170.870 [Reporter](INFO): platform_buoyancy_position 262.412126 cc
2018-03-19T20:09:31.685Z,1521490171.685 [Reporter](INFO): platform_buoyancy_position 264.560949 cc
2018-03-19T20:09:32.097Z,1521490172.097 [Reporter](INFO): platform_buoyancy_position 264.829519 cc
2018-03-19T20:09:32.477Z,1521490172.477 [Reporter](INFO): platform_buoyancy_position 266.844028 cc
2018-03-19T20:09:32.893Z,1521490172.893 [Reporter](INFO): platform_buoyancy_position 268.858508 cc
2018-03-19T20:09:33.189Z,1521490173.189 [NAL9602](INFO): SBD MO Status=2, MOMSN=4854, MT Status=2, MTMSN=0
2018-03-19T20:09:33.189Z,1521490173.189 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T20:09:33.733Z,1521490173.733 [Reporter](INFO): platform_buoyancy_position 271.007331 cc
2018-03-19T20:09:34.081Z,1521490174.081 [Reporter](INFO): platform_buoyancy_position 271.141645 cc
2018-03-19T20:09:34.493Z,1521490174.493 [Reporter](INFO): platform_buoyancy_position 273.156125 cc
2018-03-19T20:09:34.895Z,1521490174.895 [Reporter](INFO): platform_buoyancy_position 275.304919 cc
2018-03-19T20:09:35.345Z,1521490175.345 [Reporter](INFO): platform_buoyancy_position 275.439234 cc
2018-03-19T20:09:35.701Z,1521490175.701 [Reporter](INFO): platform_buoyancy_position 277.453742 cc
2018-03-19T20:09:36.098Z,1521490176.098 [Reporter](INFO): platform_buoyancy_position 279.602536 cc
2018-03-19T20:09:36.881Z,1521490176.881 [Reporter](INFO): platform_buoyancy_position 281.751330 cc
2018-03-19T20:09:37.359Z,1521490177.359 [Reporter](INFO): platform_buoyancy_position 282.019930 cc
2018-03-19T20:09:37.707Z,1521490177.707 [Reporter](INFO): platform_buoyancy_position 283.900154 cc
2018-03-19T20:09:38.097Z,1521490178.097 [Reporter](INFO): platform_buoyancy_position 286.048918 cc
2018-03-19T20:09:38.505Z,1521490178.505 [Reporter](INFO): platform_buoyancy_position 286.183233 cc
2018-03-19T20:09:38.885Z,1521490178.885 [Reporter](INFO): platform_buoyancy_position 288.197713 cc
2018-03-19T20:09:39.387Z,1521490179.387 [Reporter](INFO): platform_buoyancy_position 288.734911 cc
2018-03-19T20:09:39.685Z,1521490179.685 [Reporter](INFO): platform_buoyancy_position 290.346536 cc
2018-03-19T20:09:50.499Z,1521490190.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:51.295Z,1521490191.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:51.699Z,1521490191.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:52.495Z,1521490192.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:53.291Z,1521490193.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:53.699Z,1521490193.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:54.495Z,1521490194.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:55.291Z,1521490195.291 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:55.715Z,1521490195.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:56.512Z,1521490196.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:57.307Z,1521490197.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:57.711Z,1521490197.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:58.507Z,1521490198.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:59.193Z,1521490199.193 [NAL9602](INFO): SBD MO Status=2, MOMSN=4854, MT Status=2, MTMSN=0
2018-03-19T20:09:59.193Z,1521490199.193 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T20:09:59.303Z,1521490199.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:09:59.707Z,1521490199.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:10:00.503Z,1521490200.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:10:01.299Z,1521490201.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:10:01.735Z,1521490201.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:10:03.012Z,1521490203.012 [CommandLine](IMPORTANT): got command maintain control VerticalControl.buoyancyAction 100.000000 cubic_centimeter
2018-03-19T20:10:06.049Z,1521490206.049 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T20:10:06.049Z,1521490206.049 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-03-19T20:10:06.049Z,1521490206.049 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T20:10:06.062Z,1521490206.062 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T20:10:06.488Z,1521490206.488 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T20:10:06.488Z,1521490206.488 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-03-19T20:10:06.854Z,1521490206.854 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T20:10:06.854Z,1521490206.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T20:10:06.854Z,1521490206.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T20:10:07.736Z,1521490207.736 [Reporter](INFO): platform_buoyancy_position 292.629644 cc
2018-03-19T20:10:08.090Z,1521490208.090 [Reporter](INFO): platform_buoyancy_position 292.495330 cc
2018-03-19T20:10:08.485Z,1521490208.485 [Reporter](INFO): platform_buoyancy_position 290.480821 cc
2018-03-19T20:10:08.886Z,1521490208.886 [Reporter](INFO): platform_buoyancy_position 288.197713 cc
2018-03-19T20:10:09.342Z,1521490209.342 [Reporter](INFO): platform_buoyancy_position 282.019930 cc
2018-03-19T20:10:09.681Z,1521490209.681 [Reporter](INFO): platform_buoyancy_position 279.602536 cc
2018-03-19T20:10:10.089Z,1521490210.089 [Reporter](INFO): platform_buoyancy_position 273.290440 cc
2018-03-19T20:10:10.482Z,1521490210.482 [Reporter](INFO): platform_buoyancy_position 268.858508 cc
2018-03-19T20:10:10.913Z,1521490210.913 [Reporter](INFO): platform_buoyancy_position 262.546411 cc
2018-03-19T20:10:11.349Z,1521490211.349 [Reporter](INFO): platform_buoyancy_position 258.114538 cc
2018-03-19T20:10:11.681Z,1521490211.681 [Reporter](INFO): platform_buoyancy_position 253.682607 cc
2018-03-19T20:10:12.085Z,1521490212.085 [Reporter](INFO): platform_buoyancy_position 247.370539 cc
2018-03-19T20:10:12.513Z,1521490212.513 [Reporter](INFO): platform_buoyancy_position 241.192713 cc
2018-03-19T20:10:12.893Z,1521490212.893 [Reporter](INFO): platform_buoyancy_position 236.626525 cc
2018-03-19T20:10:13.354Z,1521490213.354 [Reporter](INFO): platform_buoyancy_position 230.314428 cc
2018-03-19T20:10:13.685Z,1521490213.685 [Reporter](INFO): platform_buoyancy_position 226.016811 cc
2018-03-19T20:10:14.077Z,1521490214.077 [Reporter](INFO): platform_buoyancy_position 221.584924 cc
2018-03-19T20:10:14.501Z,1521490214.501 [Reporter](INFO): platform_buoyancy_position 215.272827 cc
2018-03-19T20:10:14.885Z,1521490214.885 [Reporter](INFO): platform_buoyancy_position 210.840910 cc
2018-03-19T20:10:15.349Z,1521490215.349 [Reporter](INFO): platform_buoyancy_position 204.394528 cc
2018-03-19T20:10:15.689Z,1521490215.689 [Reporter](INFO): platform_buoyancy_position 200.096925 cc
2018-03-19T20:10:16.085Z,1521490216.085 [Reporter](INFO): platform_buoyancy_position 195.799323 cc
2018-03-19T20:10:16.473Z,1521490216.473 [Reporter](INFO): platform_buoyancy_position 189.352941 cc
2018-03-19T20:10:16.885Z,1521490216.885 [Reporter](INFO): platform_buoyancy_position 185.055324 cc
2018-03-19T20:10:17.361Z,1521490217.361 [Reporter](INFO): platform_buoyancy_position 178.608912 cc
2018-03-19T20:10:17.693Z,1521490217.693 [Reporter](INFO): platform_buoyancy_position 174.311310 cc
2018-03-19T20:10:18.097Z,1521490218.097 [Reporter](INFO): platform_buoyancy_position 167.999242 cc
2018-03-19T20:10:18.493Z,1521490218.493 [Reporter](INFO): platform_buoyancy_position 163.701625 cc
2018-03-19T20:10:18.905Z,1521490218.905 [Reporter](INFO): platform_buoyancy_position 157.255214 cc
2018-03-19T20:10:19.339Z,1521490219.339 [Reporter](INFO): platform_buoyancy_position 152.823297 cc
2018-03-19T20:10:19.706Z,1521490219.706 [Reporter](INFO): platform_buoyancy_position 146.645514 cc
2018-03-19T20:10:20.085Z,1521490220.085 [Reporter](INFO): platform_buoyancy_position 142.079312 cc
2018-03-19T20:10:20.485Z,1521490220.485 [Reporter](INFO): platform_buoyancy_position 137.781710 cc
2018-03-19T20:10:20.886Z,1521490220.886 [Reporter](INFO): platform_buoyancy_position 131.603912 cc
2018-03-19T20:10:21.353Z,1521490221.353 [Reporter](INFO): platform_buoyancy_position 126.366212 cc
2018-03-19T20:10:25.973Z,1521490225.973 [Reporter](INFO): platform_buoyancy_position 101.386409 cc
2018-03-19T20:11:07.985Z,1521490267.985 [NAL9602](INFO): SBD MO Status=2, MOMSN=4854, MT Status=2, MTMSN=0
2018-03-19T20:11:07.985Z,1521490267.985 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T20:11:16.459Z,1521490276.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:17.256Z,1521490277.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:17.663Z,1521490277.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:18.459Z,1521490278.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:19.256Z,1521490279.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:19.663Z,1521490279.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:20.459Z,1521490280.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:21.256Z,1521490281.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:21.663Z,1521490281.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:22.459Z,1521490282.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:23.258Z,1521490283.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:23.663Z,1521490283.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:24.459Z,1521490284.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:25.256Z,1521490285.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:25.665Z,1521490285.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:26.459Z,1521490286.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:27.256Z,1521490287.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:27.663Z,1521490287.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:28.459Z,1521490288.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:29.256Z,1521490289.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:29.663Z,1521490289.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:30.459Z,1521490290.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:31.256Z,1521490291.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:31.679Z,1521490291.679 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:32.475Z,1521490292.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:33.272Z,1521490293.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:33.683Z,1521490293.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:34.479Z,1521490294.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:35.276Z,1521490295.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:35.683Z,1521490295.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:36.479Z,1521490296.479 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:11:37.197Z,1521490297.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:12:28.644Z,1521490348.644 [CommandLine](IMPORTANT): got command maintain clear
2018-03-19T20:12:28.866Z,1521490348.866 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,Aanderaa_O2,CANONSampler,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,ElevatorOffsetCalculator,StratificationFrontDetector,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-03-19T20:12:30.890Z,1521490350.890 [Reporter](INFO): platform_buoyancy_position 101.252110 cc
2018-03-19T20:12:31.341Z,1521490351.341 [Reporter](INFO): platform_buoyancy_position 103.535211 cc
2018-03-19T20:12:31.705Z,1521490351.705 [Reporter](INFO): platform_buoyancy_position 105.684012 cc
2018-03-19T20:12:32.094Z,1521490352.094 [Reporter](INFO): platform_buoyancy_position 109.981607 cc
2018-03-19T20:12:32.501Z,1521490352.501 [Reporter](INFO): platform_buoyancy_position 116.159419 cc
2018-03-19T20:12:32.897Z,1521490352.897 [Reporter](INFO): platform_buoyancy_position 120.591314 cc
2018-03-19T20:12:33.325Z,1521490353.325 [Reporter](INFO): platform_buoyancy_position 125.560415 cc
2018-03-19T20:12:33.689Z,1521490353.689 [Reporter](INFO): platform_buoyancy_position 129.589418 cc
2018-03-19T20:12:34.086Z,1521490354.086 [Reporter](INFO): platform_buoyancy_position 135.632901 cc
2018-03-19T20:12:34.502Z,1521490354.502 [Reporter](INFO): platform_buoyancy_position 142.079312 cc
2018-03-19T20:12:34.897Z,1521490354.897 [Reporter](INFO): platform_buoyancy_position 146.511200 cc
2018-03-19T20:12:35.317Z,1521490355.317 [Reporter](INFO): platform_buoyancy_position 150.943117 cc
2018-03-19T20:12:35.698Z,1521490355.698 [Reporter](INFO): platform_buoyancy_position 157.120914 cc
2018-03-19T20:12:36.085Z,1521490356.085 [Reporter](INFO): platform_buoyancy_position 161.552831 cc
2018-03-19T20:12:36.493Z,1521490356.493 [Reporter](INFO): platform_buoyancy_position 167.864928 cc
2018-03-19T20:12:36.886Z,1521490356.886 [Reporter](INFO): platform_buoyancy_position 172.162530 cc
2018-03-19T20:12:37.293Z,1521490357.293 [Reporter](INFO): platform_buoyancy_position 178.608912 cc
2018-03-19T20:12:37.697Z,1521490357.697 [Reporter](INFO): platform_buoyancy_position 183.040829 cc
2018-03-19T20:12:38.098Z,1521490358.098 [Reporter](INFO): platform_buoyancy_position 187.472717 cc
2018-03-19T20:12:38.485Z,1521490358.485 [Reporter](INFO): platform_buoyancy_position 193.784814 cc
2018-03-19T20:12:38.901Z,1521490358.901 [Reporter](INFO): platform_buoyancy_position 197.948117 cc
2018-03-19T20:12:39.310Z,1521490359.310 [Reporter](INFO): platform_buoyancy_position 204.394528 cc
2018-03-19T20:12:39.709Z,1521490359.709 [Reporter](INFO): platform_buoyancy_position 208.692145 cc
2018-03-19T20:12:40.118Z,1521490360.118 [Reporter](INFO): platform_buoyancy_position 213.929845 cc
2018-03-19T20:12:40.477Z,1521490360.477 [Reporter](INFO): platform_buoyancy_position 219.436130 cc
2018-03-19T20:12:40.960Z,1521490360.960 [Reporter](INFO): platform_buoyancy_position 225.882541 cc
2018-03-19T20:12:41.289Z,1521490361.289 [Reporter](INFO): platform_buoyancy_position 230.314428 cc
2018-03-19T20:12:41.681Z,1521490361.681 [Reporter](INFO): platform_buoyancy_position 234.612031 cc
2018-03-19T20:12:42.093Z,1521490362.093 [Reporter](INFO): platform_buoyancy_position 240.924128 cc
2018-03-19T20:12:42.477Z,1521490362.477 [Reporter](INFO): platform_buoyancy_position 245.356030 cc
2018-03-19T20:12:42.889Z,1521490362.889 [Reporter](INFO): platform_buoyancy_position 251.668127 cc
2018-03-19T20:12:43.297Z,1521490363.297 [Reporter](INFO): platform_buoyancy_position 255.965715 cc
2018-03-19T20:12:43.685Z,1521490363.685 [Reporter](INFO): platform_buoyancy_position 262.546411 cc
2018-03-19T20:12:44.109Z,1521490364.109 [Reporter](INFO): platform_buoyancy_position 266.844028 cc
2018-03-19T20:12:44.501Z,1521490364.501 [Reporter](INFO): platform_buoyancy_position 271.275931 cc
2018-03-19T20:12:44.897Z,1521490364.897 [Reporter](INFO): platform_buoyancy_position 277.588057 cc
2018-03-19T20:12:45.398Z,1521490365.398 [Reporter](INFO): platform_buoyancy_position 283.900154 cc
2018-03-19T20:12:45.694Z,1521490365.694 [Reporter](INFO): platform_buoyancy_position 288.332027 cc
2018-03-19T20:12:46.078Z,1521490366.078 [Reporter](INFO): platform_buoyancy_position 292.495330 cc
2018-03-19T20:12:46.489Z,1521490366.489 [Reporter](INFO): platform_buoyancy_position 298.404542 cc
2018-03-19T20:12:46.895Z,1521490366.895 [Reporter](INFO): platform_buoyancy_position 303.373614 cc
2018-03-19T20:12:47.345Z,1521490367.345 [Reporter](INFO): platform_buoyancy_position 309.820025 cc
2018-03-19T20:12:47.706Z,1521490367.706 [Reporter](INFO): platform_buoyancy_position 313.983328 cc
2018-03-19T20:12:48.094Z,1521490368.094 [Reporter](INFO): platform_buoyancy_position 318.280945 cc
2018-03-19T20:12:48.499Z,1521490368.499 [Reporter](INFO): platform_buoyancy_position 324.727327 cc
2018-03-19T20:12:48.905Z,1521490368.905 [Reporter](INFO): platform_buoyancy_position 329.159229 cc
2018-03-19T20:12:49.305Z,1521490369.305 [Reporter](INFO): platform_buoyancy_position 334.531243 cc
2018-03-19T20:12:49.701Z,1521490369.701 [Reporter](INFO): platform_buoyancy_position 339.903228 cc
2018-03-19T20:12:50.101Z,1521490370.101 [Reporter](INFO): platform_buoyancy_position 346.215325 cc
2018-03-19T20:12:50.497Z,1521490370.497 [Reporter](INFO): platform_buoyancy_position 350.647257 cc
2018-03-19T20:12:50.889Z,1521490370.889 [Reporter](INFO): platform_buoyancy_position 355.616328 cc
2018-03-19T20:12:51.293Z,1521490371.293 [Reporter](INFO): platform_buoyancy_position 361.256942 cc
2018-03-19T20:12:51.685Z,1521490371.685 [Reporter](INFO): platform_buoyancy_position 365.688844 cc
2018-03-19T20:12:52.125Z,1521490372.125 [Reporter](INFO): platform_buoyancy_position 372.000941 cc
2018-03-19T20:12:52.497Z,1521490372.497 [Reporter](INFO): platform_buoyancy_position 376.432843 cc
2018-03-19T20:12:52.893Z,1521490372.893 [Reporter](INFO): platform_buoyancy_position 382.879254 cc
2018-03-19T20:12:53.297Z,1521490373.297 [Reporter](INFO): platform_buoyancy_position 387.176842 cc
2018-03-19T20:12:53.697Z,1521490373.697 [Reporter](INFO): platform_buoyancy_position 393.488939 cc
2018-03-19T20:12:54.101Z,1521490374.101 [Reporter](INFO): platform_buoyancy_position 397.920841 cc
2018-03-19T20:12:54.485Z,1521490374.485 [Reporter](INFO): platform_buoyancy_position 402.352744 cc
2018-03-19T20:12:54.949Z,1521490374.949 [Reporter](INFO): platform_buoyancy_position 408.530555 cc
2018-03-19T20:12:55.295Z,1521490375.295 [Reporter](INFO): platform_buoyancy_position 412.962429 cc
2018-03-19T20:12:55.693Z,1521490375.693 [Reporter](INFO): platform_buoyancy_position 419.274555 cc
2018-03-19T20:12:56.136Z,1521490376.136 [Reporter](INFO): platform_buoyancy_position 423.706457 cc
2018-03-19T20:12:56.481Z,1521490376.481 [Reporter](INFO): platform_buoyancy_position 429.884240 cc
2018-03-19T20:12:56.881Z,1521490376.881 [Reporter](INFO): platform_buoyancy_position 434.450456 cc
2018-03-19T20:12:57.290Z,1521490377.290 [Reporter](INFO): platform_buoyancy_position 439.150957 cc
2018-03-19T20:12:57.709Z,1521490377.709 [Reporter](INFO): platform_buoyancy_position 445.060141 cc
2018-03-19T20:12:58.085Z,1521490378.085 [Reporter](INFO): platform_buoyancy_position 449.492043 cc
2018-03-19T20:12:58.505Z,1521490378.505 [Reporter](INFO): platform_buoyancy_position 454.326888 cc
2018-03-19T20:12:58.901Z,1521490378.901 [Reporter](INFO): platform_buoyancy_position 460.236042 cc
2018-03-19T20:12:59.370Z,1521490379.370 [Reporter](INFO): platform_buoyancy_position 466.682453 cc
2018-03-19T20:12:59.715Z,1521490379.715 [Reporter](INFO): platform_buoyancy_position 470.980071 cc
2018-03-19T20:13:00.102Z,1521490380.102 [Reporter](INFO): platform_buoyancy_position 477.292138 cc
2018-03-19T20:13:00.485Z,1521490380.485 [Reporter](INFO): platform_buoyancy_position 481.589756 cc
2018-03-19T20:13:00.877Z,1521490380.877 [Reporter](INFO): platform_buoyancy_position 486.021629 cc
2018-03-19T20:13:01.340Z,1521490381.340 [Reporter](INFO): platform_buoyancy_position 492.468069 cc
2018-03-19T20:13:01.705Z,1521490381.705 [Reporter](INFO): platform_buoyancy_position 498.780108 cc
2018-03-19T20:13:02.121Z,1521490382.121 [Reporter](INFO): platform_buoyancy_position 503.077754 cc
2018-03-19T20:13:02.512Z,1521490382.512 [Reporter](INFO): platform_buoyancy_position 507.643970 cc
2018-03-19T20:13:02.889Z,1521490382.889 [Reporter](INFO): platform_buoyancy_position 513.821724 cc
2018-03-19T20:13:03.289Z,1521490383.289 [Reporter](INFO): platform_buoyancy_position 518.253597 cc
2018-03-19T20:13:03.701Z,1521490383.701 [Reporter](INFO): platform_buoyancy_position 524.700037 cc
2018-03-19T20:13:04.081Z,1521490384.081 [Reporter](INFO): platform_buoyancy_position 528.997625 cc
2018-03-19T20:13:04.493Z,1521490384.493 [Reporter](INFO): platform_buoyancy_position 534.638239 cc
2018-03-19T20:13:04.905Z,1521490384.905 [Reporter](INFO): platform_buoyancy_position 539.741653 cc
2018-03-19T20:13:05.289Z,1521490385.289 [Reporter](INFO): platform_buoyancy_position 545.785122 cc
2018-03-19T20:13:05.693Z,1521490385.693 [Reporter](INFO): platform_buoyancy_position 550.485624 cc
2018-03-19T20:13:06.093Z,1521490386.093 [Reporter](INFO): platform_buoyancy_position 554.783212 cc
2018-03-19T20:13:06.485Z,1521490386.485 [Reporter](INFO): platform_buoyancy_position 561.095309 cc
2018-03-19T20:13:06.861Z,1521490386.861 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T20:13:06.861Z,1521490386.861 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-03-19T20:13:06.861Z,1521490386.861 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T20:13:06.908Z,1521490386.908 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T20:13:06.910Z,1521490386.910 [Reporter](INFO): platform_buoyancy_position 565.527240 cc
2018-03-19T20:13:07.288Z,1521490387.288 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T20:13:07.288Z,1521490387.288 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-03-19T20:13:07.290Z,1521490387.290 [Reporter](INFO): platform_buoyancy_position 571.839279 cc
2018-03-19T20:13:07.643Z,1521490387.643 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T20:13:07.643Z,1521490387.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T20:13:07.643Z,1521490387.643 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T20:13:07.686Z,1521490387.686 [Reporter](INFO): platform_buoyancy_position 576.136925 cc
2018-03-19T20:13:08.117Z,1521490388.117 [Reporter](INFO): platform_buoyancy_position 582.717650 cc
2018-03-19T20:13:08.477Z,1521490388.477 [Reporter](INFO): platform_buoyancy_position 587.015180 cc
2018-03-19T20:13:08.962Z,1521490388.962 [Reporter](INFO): platform_buoyancy_position 591.312826 cc
2018-03-19T20:13:09.289Z,1521490389.289 [Reporter](INFO): platform_buoyancy_position 595.744757 cc
2018-03-19T20:13:09.693Z,1521490389.693 [Reporter](INFO): platform_buoyancy_position 601.922569 cc
2018-03-19T20:13:10.085Z,1521490390.085 [Reporter](INFO): platform_buoyancy_position 606.488727 cc
2018-03-19T20:13:10.497Z,1521490390.497 [Reporter](INFO): platform_buoyancy_position 612.666481 cc
2018-03-19T20:13:10.913Z,1521490390.913 [Reporter](INFO): platform_buoyancy_position 619.112921 cc
2018-03-19T20:13:11.317Z,1521490391.317 [Reporter](INFO): platform_buoyancy_position 623.544795 cc
2018-03-19T20:13:11.701Z,1521490391.701 [Reporter](INFO): platform_buoyancy_position 628.111011 cc
2018-03-19T20:13:12.082Z,1521490392.082 [Reporter](INFO): platform_buoyancy_position 634.154538 cc
2018-03-19T20:13:12.474Z,1521490392.474 [Reporter](INFO): platform_buoyancy_position 638.586411 cc
2018-03-19T20:13:12.929Z,1521490392.929 [Reporter](INFO): platform_buoyancy_position 645.032851 cc
2018-03-19T20:13:13.352Z,1521490393.352 [Reporter](INFO): platform_buoyancy_position 651.076378 cc
2018-03-19T20:13:13.690Z,1521490393.690 [Reporter](INFO): platform_buoyancy_position 655.642536 cc
2018-03-19T20:13:14.093Z,1521490394.093 [Reporter](INFO): platform_buoyancy_position 660.074409 cc
2018-03-19T20:13:14.507Z,1521490394.507 [Reporter](INFO): platform_buoyancy_position 666.252279 cc
2018-03-19T20:13:14.894Z,1521490394.894 [Reporter](INFO): platform_buoyancy_position 670.818437 cc
2018-03-19T20:13:15.401Z,1521490395.401 [Reporter](INFO): platform_buoyancy_position 677.130534 cc
2018-03-19T20:13:15.700Z,1521490395.700 [Reporter](INFO): platform_buoyancy_position 681.428122 cc
2018-03-19T20:13:16.098Z,1521490396.098 [Reporter](INFO): platform_buoyancy_position 685.860054 cc
2018-03-19T20:13:16.494Z,1521490396.494 [Reporter](INFO): platform_buoyancy_position 692.172092 cc
2018-03-19T20:13:16.885Z,1521490396.885 [Reporter](INFO): platform_buoyancy_position 696.604024 cc
2018-03-19T20:13:17.302Z,1521490397.302 [Reporter](INFO): platform_buoyancy_position 701.841724 cc
2018-03-19T20:13:17.677Z,1521490397.677 [Reporter](INFO): platform_buoyancy_position 707.213767 cc
2018-03-19T20:13:18.081Z,1521490398.081 [Reporter](INFO): platform_buoyancy_position 711.645640 cc
2018-03-19T20:13:18.481Z,1521490398.481 [Reporter](INFO): platform_buoyancy_position 717.957737 cc
2018-03-19T20:13:18.882Z,1521490398.882 [Reporter](INFO): platform_buoyancy_position 722.389668 cc
2018-03-19T20:13:19.289Z,1521490399.289 [Reporter](INFO): platform_buoyancy_position 728.701707 cc
2018-03-19T20:13:19.693Z,1521490399.693 [Reporter](INFO): platform_buoyancy_position 732.999353 cc
2018-03-19T20:13:20.086Z,1521490400.086 [Reporter](INFO): platform_buoyancy_position 739.445735 cc
2018-03-19T20:13:20.501Z,1521490400.501 [Reporter](INFO): platform_buoyancy_position 743.743323 cc
2018-03-19T20:13:20.857Z,1521490400.857 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-03-19T20:08:20.8Z
2018-03-19T20:13:20.857Z,1521490400.857 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:13:20.857Z,1521490400.857 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:13:20.902Z,1521490400.902 [Reporter](INFO): platform_buoyancy_position 748.443825 cc
2018-03-19T20:13:21.285Z,1521490401.285 [Reporter](INFO): platform_buoyancy_position 754.621637 cc
2018-03-19T20:13:21.686Z,1521490401.686 [Reporter](INFO): platform_buoyancy_position 759.053510 cc
2018-03-19T20:13:22.082Z,1521490402.082 [Reporter](INFO): platform_buoyancy_position 765.231322 cc
2018-03-19T20:13:25.403Z,1521490405.403 [Reporter](INFO): platform_buoyancy_position 808.207318 cc
2018-03-19T20:13:25.424Z,1521490405.424 [DataOverHttps](INFO): Sending 212 bytes from file Logs/20180319T193343/Courier0016.lzma
2018-03-19T20:13:25.541Z,1521490405.541 [Reporter](INFO): platform_buoyancy_position 810.356112 cc
2018-03-19T20:13:25.914Z,1521490405.914 [Reporter](INFO): platform_buoyancy_position 814.788043 cc
2018-03-19T20:13:26.211Z,1521490406.211 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0016.lzma.bak
2018-03-19T20:13:26.211Z,1521490406.211 [DataOverHttps](INFO): SBD MOMSN=8138401
2018-03-19T20:13:26.321Z,1521490406.321 [Reporter](INFO): platform_buoyancy_position 821.100140 cc
2018-03-19T20:13:26.717Z,1521490406.717 [Reporter](INFO): platform_buoyancy_position 825.532072 cc
2018-03-19T20:13:27.119Z,1521490407.119 [Reporter](INFO): platform_buoyancy_position 830.232515 cc
2018-03-19T20:13:30.483Z,1521490410.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:13:30.501Z,1521490410.501 [Reporter](INFO): platform_buoyancy_position 874.820107 cc
2018-03-19T20:13:30.644Z,1521490410.644 [Reporter](INFO): platform_buoyancy_position 877.103244 cc
2018-03-19T20:13:30.997Z,1521490410.997 [Reporter](INFO): platform_buoyancy_position 881.400832 cc
2018-03-19T20:13:31.139Z,1521490411.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:13:31.426Z,1521490411.426 [Reporter](INFO): platform_buoyancy_position 887.712929 cc
2018-03-19T20:13:31.805Z,1521490411.805 [Reporter](INFO): platform_buoyancy_position 892.010576 cc
2018-03-19T20:13:32.210Z,1521490412.210 [Reporter](INFO): platform_buoyancy_position 898.591243 cc
2018-03-19T20:13:35.522Z,1521490415.522 [Reporter](INFO): platform_buoyancy_position 941.433012 cc
2018-03-19T20:13:35.531Z,1521490415.531 [DataOverHttps](INFO): Sending 334 bytes from file Logs/20180319T193343/Express0017.lzma
2018-03-19T20:13:36.331Z,1521490416.331 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0017.lzma.bak
2018-03-19T20:13:36.331Z,1521490416.331 [DataOverHttps](INFO): SBD MOMSN=8138404
2018-03-19T20:13:36.880Z,1521490416.880 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:13:36.880Z,1521490416.880 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:13:36.880Z,1521490416.880 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:13:40.365Z,1521490420.365 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-03-19T20:13:41.471Z,1521490421.471 [Reporter](INFO): platform_buoyancy_position 954.191433 cc
2018-03-19T20:13:53.719Z,1521490433.719 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T20:14:10.852Z,1521490450.852 [NAL9602](INFO): Powering down
2018-03-19T20:15:22.483Z,1521490522.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:15:23.143Z,1521490523.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:15:36.487Z,1521490536.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:15:37.139Z,1521490537.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:16:07.716Z,1521490567.716 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T20:16:07.716Z,1521490567.716 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-03-19T20:16:07.716Z,1521490567.716 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T20:16:07.728Z,1521490567.728 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T20:16:08.127Z,1521490568.127 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T20:16:08.128Z,1521490568.128 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-03-19T20:16:08.536Z,1521490568.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T20:16:08.537Z,1521490568.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T20:16:08.537Z,1521490568.537 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T20:17:14.475Z,1521490634.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:17:15.171Z,1521490635.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:18:37.225Z,1521490717.225 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T20:18:37.226Z,1521490717.226 [Default:CheckIn:C.Wait] Stopped
2018-03-19T20:18:37.226Z,1521490717.226 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:18:37.226Z,1521490717.226 [Default:CheckIn:D] Running Loop=1
2018-03-19T20:18:37.642Z,1521490717.642 [Default:CheckIn:D] Stopped
2018-03-19T20:18:37.642Z,1521490717.642 [Default:CheckIn:E] Running Loop=1
2018-03-19T20:18:38.083Z,1521490718.083 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.534509 min 
2018-03-19T20:18:38.083Z,1521490718.083 [Default:CheckIn:E] Stopped
2018-03-19T20:18:38.084Z,1521490718.084 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T20:18:38.084Z,1521490718.084 [Default:CheckIn] Stopped
2018-03-19T20:18:38.084Z,1521490718.084 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T20:18:38.084Z,1521490718.084 [Default:CheckIn](INFO): Running loop #5
2018-03-19T20:18:38.084Z,1521490718.084 [Default:CheckIn] Running Loop=5
2018-03-19T20:18:38.084Z,1521490718.084 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T20:18:38.084Z,1521490718.084 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T20:18:41.472Z,1521490721.472 [NAL9602](INFO): Powering up
2018-03-19T20:18:52.616Z,1521490732.616 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:18:53.412Z,1521490733.412 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-03-19T20:18:53.412Z,1521490733.412 [NAL9602] Data Fault, FailCount= 3
2018-03-19T20:18:53.412Z,1521490733.412 [NAL9602](ERROR): Data Fault
2018-03-19T20:18:53.496Z,1521490733.496 [CBIT](ERROR): Data Fault in component: NAL9602
2018-03-19T20:18:53.816Z,1521490733.816 [NAL9602](INFO): Powering down
2018-03-19T20:18:54.699Z,1521490734.699 [CBIT](INFO): Clearing failed state for component NAL9602
2018-03-19T20:18:54.699Z,1521490734.699 [NAL9602] No Fault, FailCount= 3
2018-03-19T20:19:06.475Z,1521490746.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:19:07.144Z,1521490747.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:19:08.645Z,1521490748.645 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-03-19T20:19:08.645Z,1521490748.645 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-03-19T20:19:08.645Z,1521490748.645 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-03-19T20:19:08.690Z,1521490748.690 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-03-19T20:19:09.081Z,1521490749.081 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-03-19T20:19:09.081Z,1521490749.081 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-03-19T20:19:09.473Z,1521490749.473 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-03-19T20:19:09.474Z,1521490749.474 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-03-19T20:19:09.474Z,1521490749.474 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-03-19T20:19:24.216Z,1521490764.216 [NAL9602](INFO): Powering up NAL9602
2018-03-19T20:19:35.416Z,1521490775.416 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:19:48.969Z,1521490788.969 [NAL9602](INFO): SBD MO Status=0, MOMSN=4854, MT Status=0, MTMSN=0
2018-03-19T20:19:48.969Z,1521490788.969 [NAL9602](INFO): No messages in MT queue
2018-03-19T20:21:24.815Z,1521490884.815 [NAL9602](INFO): GPS fix at 20180319T202124: (36.802341, -121.787336)
2018-03-19T20:21:24.883Z,1521490884.883 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:21:24.883Z,1521490884.883 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:21:29.845Z,1521490889.845 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20180319T193343/Courier0020.lzma
2018-03-19T20:21:30.643Z,1521490890.643 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0020.lzma.bak
2018-03-19T20:21:30.643Z,1521490890.643 [DataOverHttps](INFO): SBD MOMSN=8138411
2018-03-19T20:21:40.150Z,1521490900.150 [DataOverHttps](INFO): Sending 227 bytes from file Logs/20180319T193343/Express0021.lzma
2018-03-19T20:21:40.947Z,1521490900.947 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0021.lzma.bak
2018-03-19T20:21:40.947Z,1521490900.947 [DataOverHttps](INFO): SBD MOMSN=8138414
2018-03-19T20:21:41.400Z,1521490901.400 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:21:41.400Z,1521490901.400 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:21:41.400Z,1521490901.400 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:21:59.876Z,1521490919.876 [NAL9602](INFO): Powering down
2018-03-19T20:23:53.921Z,1521491033.921 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T20:24:56.475Z,1521491096.475 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:24:57.131Z,1521491097.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:26:42.094Z,1521491202.094 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T20:26:42.094Z,1521491202.094 [Default:CheckIn:C.Wait] Stopped
2018-03-19T20:26:42.094Z,1521491202.094 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:26:42.094Z,1521491202.094 [Default:CheckIn:D] Running Loop=1
2018-03-19T20:26:42.455Z,1521491202.455 [Default:CheckIn:D] Stopped
2018-03-19T20:26:42.455Z,1521491202.455 [Default:CheckIn:E] Running Loop=1
2018-03-19T20:26:42.850Z,1521491202.850 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 49.614734 min 
2018-03-19T20:26:42.850Z,1521491202.850 [Default:CheckIn:E] Stopped
2018-03-19T20:26:42.850Z,1521491202.850 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T20:26:42.850Z,1521491202.850 [Default:CheckIn] Stopped
2018-03-19T20:26:42.851Z,1521491202.851 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T20:26:42.851Z,1521491202.851 [Default:CheckIn](INFO): Running loop #6
2018-03-19T20:26:42.851Z,1521491202.851 [Default:CheckIn] Running Loop=6
2018-03-19T20:26:42.851Z,1521491202.851 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T20:26:42.851Z,1521491202.851 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T20:26:46.176Z,1521491206.176 [NAL9602](INFO): Powering up
2018-03-19T20:26:57.312Z,1521491217.312 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:27:29.713Z,1521491249.713 [NAL9602](INFO): SBD MO Status=2, MOMSN=4855, MT Status=2, MTMSN=0
2018-03-19T20:27:29.713Z,1521491249.713 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T20:27:39.713Z,1521491259.713 [NAL9602](INFO): SBD MO Status=0, MOMSN=4855, MT Status=0, MTMSN=0
2018-03-19T20:27:39.713Z,1521491259.713 [NAL9602](INFO): No messages in MT queue
2018-03-19T20:27:40.915Z,1521491260.915 [NAL9602](INFO): GPS fix at 20180319T202740: (36.802277, -121.786858)
2018-03-19T20:27:40.988Z,1521491260.988 [UniversalFixResidualReporter](INFO): Fix residual: 77.3 %DT, over the last 1556.3 m. Residual distance 1203.6 m at bearing 126.4 degrees. Fix at (36.8023, -121.7869) with 43.2 m made good.
2018-03-19T20:27:40.989Z,1521491260.989 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:27:40.989Z,1521491260.989 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:27:45.556Z,1521491265.556 [DataOverHttps](INFO): Sending 192 bytes from file Logs/20180319T193343/Courier0024.lzma
2018-03-19T20:27:46.347Z,1521491266.347 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0024.lzma.bak
2018-03-19T20:27:46.347Z,1521491266.347 [DataOverHttps](INFO): SBD MOMSN=8138419
2018-03-19T20:27:55.429Z,1521491275.429 [DataOverHttps](INFO): Sending 158 bytes from file Logs/20180319T193343/Express0025.lzma
2018-03-19T20:27:56.219Z,1521491276.219 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0025.lzma.bak
2018-03-19T20:27:56.219Z,1521491276.219 [DataOverHttps](INFO): SBD MOMSN=8138422
2018-03-19T20:27:56.691Z,1521491276.691 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:27:56.691Z,1521491276.691 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:27:56.692Z,1521491276.692 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:28:15.680Z,1521491295.680 [NAL9602](INFO): Powering down
2018-03-19T20:28:40.467Z,1521491320.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:28:41.127Z,1521491321.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:29:01.359Z,1521491341.359 [DataOverHttps](IMPORTANT): SBD MTMSN=20180319T202901
2018-03-19T20:29:06.078Z,1521491346.078 [DataOverHttps](INFO): Received command:ibit
2018-03-19T20:29:06.139Z,1521491346.139 [CommandLine](IMPORTANT): got command ibit
2018-03-19T20:29:06.156Z,1521491346.156 [IBIT](IMPORTANT): Beginning Initiated BIT
2018-03-19T20:29:06.156Z,1521491346.156 [IBIT](IMPORTANT): Beginning control surface checks.
2018-03-19T20:29:06.159Z,1521491346.159 [CBIT](IMPORTANT): Beginning ground fault scan
2018-03-19T20:29:06.479Z,1521491346.479 [NAL9602](INFO): Powering up
2018-03-19T20:29:16.997Z,1521491356.997 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.122916
CHAN A1 (24V): -0.015419
CHAN A2 (12V): -0.002153
CHAN A3 (5V): -0.001874
CHAN B0 (3.3V): 0.000282
CHAN B1 (3.15aV): -0.000166
CHAN B2 (3.15bV): -0.000475
CHAN B3 (GND): 0.000164
OPEN: -0.000626
Full Scale Calc: 4.765 mA, -1.589 mA
2018-03-19T20:29:17.684Z,1521491357.684 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:29:44.877Z,1521491384.877 [NAL9602](INFO): SBD MO Status=2, MOMSN=4856, MT Status=2, MTMSN=0
2018-03-19T20:29:44.878Z,1521491384.878 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T20:30:05.768Z,1521491405.768 [NAL9602](INFO): SBD MO Status=2, MOMSN=4856, MT Status=2, MTMSN=0
2018-03-19T20:30:05.768Z,1521491405.768 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T20:30:16.653Z,1521491416.653 [NAL9602](INFO): SBD MO Status=0, MOMSN=4856, MT Status=0, MTMSN=0
2018-03-19T20:30:16.653Z,1521491416.653 [NAL9602](INFO): No messages in MT queue
2018-03-19T20:30:17.855Z,1521491417.855 [NAL9602](INFO): GPS fix at 20180319T203017: (36.802282, -121.786801)
2018-03-19T20:30:17.927Z,1521491417.927 [UniversalFixResidualReporter](INFO): Fix residual: 99.5 %DT, over the last 649.3 m. Residual distance 646.2 m at bearing 137.8 degrees. Fix at (36.8023, -121.7868) with 5.1 m made good.
2018-03-19T20:30:17.943Z,1521491417.943 [IBIT](IMPORTANT): Communications Status:
Fix Status: 1
Iridium Signal Strength: 5
Latitude: 36.802280 Longitude: -121.786804
2018-03-19T20:30:18.320Z,1521491418.320 [IBIT](IMPORTANT): Battery Status:
Battery Charge (AH): 0.000000
Voltage: 0.000000
2018-03-19T20:30:18.320Z,1521491418.320 [IBIT](IMPORTANT): batteryCapacityThreshold: 5.000000 Ah
2018-03-19T20:30:18.321Z,1521491418.321 [IBIT](IMPORTANT): batteryVoltageThreshold: 13.500000 V
2018-03-19T20:30:18.818Z,1521491418.818 [IBIT](IMPORTANT): bitHumidityThreshold: 55.000000 %
2018-03-19T20:30:18.819Z,1521491418.819 [IBIT](IMPORTANT): bitPressureThreshold: 0.750000 psi
2018-03-19T20:30:18.819Z,1521491418.819 [IBIT](IMPORTANT): Pressure:9.408313 PSI
2018-03-19T20:30:18.819Z,1521491418.819 [IBIT](IMPORTANT): Humidity:14.552557 %
2018-03-19T20:30:19.112Z,1521491419.112 [IBIT](IMPORTANT): surfaceThreshold: 1.000000 m
2018-03-19T20:30:19.112Z,1521491419.112 [IBIT](IMPORTANT): buoyancyNeutral: 315.000000 cc
2018-03-19T20:30:19.113Z,1521491419.113 [IBIT](IMPORTANT): massDefault: -0.075000 cm
2018-03-19T20:30:19.113Z,1521491419.113 [IBIT](IMPORTANT): stopDepth: 205.000000 m
2018-03-19T20:30:19.113Z,1521491419.113 [IBIT](IMPORTANT): abortDepth: 250.000000 m
2018-03-19T20:30:19.113Z,1521491419.113 [IBIT](IMPORTANT): IBIT PASSED
2018-03-19T20:30:32.459Z,1521491432.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:30:33.119Z,1521491433.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:30:50.656Z,1521491450.656 [NAL9602](INFO): Powering down
2018-03-19T20:32:10.463Z,1521491530.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:32:11.125Z,1521491531.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:32:57.283Z,1521491577.283 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T20:32:57.283Z,1521491577.283 [Default:CheckIn:C.Wait] Stopped
2018-03-19T20:32:57.283Z,1521491577.283 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:32:57.283Z,1521491577.283 [Default:CheckIn:D] Running Loop=1
2018-03-19T20:32:57.681Z,1521491577.681 [Default:CheckIn:D] Stopped
2018-03-19T20:32:57.681Z,1521491577.681 [Default:CheckIn:E] Running Loop=1
2018-03-19T20:32:58.082Z,1521491578.082 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 55.868502 min 
2018-03-19T20:32:58.082Z,1521491578.082 [Default:CheckIn:E] Stopped
2018-03-19T20:32:58.082Z,1521491578.082 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T20:32:58.083Z,1521491578.083 [Default:CheckIn] Stopped
2018-03-19T20:32:58.083Z,1521491578.083 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T20:32:58.083Z,1521491578.083 [Default:CheckIn](INFO): Running loop #7
2018-03-19T20:32:58.083Z,1521491578.083 [Default:CheckIn] Running Loop=7
2018-03-19T20:32:58.083Z,1521491578.083 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T20:32:58.083Z,1521491578.083 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T20:32:58.831Z,1521491578.831 [NAL9602](INFO): Powering up
2018-03-19T20:33:09.864Z,1521491589.864 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:33:25.865Z,1521491605.865 [NAL9602](INFO): SBD MO Status=0, MOMSN=4857, MT Status=0, MTMSN=0
2018-03-19T20:33:25.865Z,1521491605.865 [NAL9602](INFO): No messages in MT queue
2018-03-19T20:33:53.936Z,1521491633.936 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T20:33:57.071Z,1521491637.071 [NAL9602](INFO): GPS fix at 20180319T203356: (36.802272, -121.786861)
2018-03-19T20:33:57.144Z,1521491637.144 [UniversalFixResidualReporter](INFO): Fix residual: 100.3 %DT, over the last 906.9 m. Residual distance 909.7 m at bearing 137.1 degrees. Fix at (36.8023, -121.7869) with 5.5 m made good.
2018-03-19T20:33:57.144Z,1521491637.144 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:33:57.145Z,1521491637.145 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:34:01.692Z,1521491641.692 [DataOverHttps](INFO): Sending 71 bytes from file Logs/20180319T193343/Courier0028.lzma
2018-03-19T20:34:02.491Z,1521491642.491 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0028.lzma.bak
2018-03-19T20:34:02.491Z,1521491642.491 [DataOverHttps](INFO): SBD MOMSN=8138429
2018-03-19T20:34:11.543Z,1521491651.543 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180319T193343/Courier0032.lzma
2018-03-19T20:34:12.350Z,1521491652.350 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0032.lzma.bak
2018-03-19T20:34:12.350Z,1521491652.350 [DataOverHttps](INFO): SBD MOMSN=8138432
2018-03-19T20:34:16.467Z,1521491656.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:34:17.127Z,1521491657.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:34:25.656Z,1521491665.656 [DataOverHttps](INFO): Sending 786 bytes from file Logs/20180319T193343/Express0029.lzma
2018-03-19T20:34:26.451Z,1521491666.451 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0029.lzma.bak
2018-03-19T20:34:26.451Z,1521491666.451 [DataOverHttps](INFO): SBD MOMSN=8138434
2018-03-19T20:34:31.888Z,1521491671.888 [NAL9602](INFO): Powering down
2018-03-19T20:34:35.764Z,1521491675.764 [DataOverHttps](INFO): Sending 52 bytes from file Logs/20180319T193343/Express0033.lzma
2018-03-19T20:34:36.563Z,1521491676.563 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0033.lzma.bak
2018-03-19T20:34:36.563Z,1521491676.563 [DataOverHttps](INFO): SBD MOMSN=8138457
2018-03-19T20:34:37.019Z,1521491677.019 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:34:37.019Z,1521491677.019 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:34:37.020Z,1521491677.020 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:36:08.459Z,1521491768.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:36:09.115Z,1521491769.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:38:00.459Z,1521491880.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:38:01.131Z,1521491881.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:39:37.562Z,1521491977.562 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T20:39:37.567Z,1521491977.567 [Default:CheckIn:C.Wait] Stopped
2018-03-19T20:39:37.567Z,1521491977.567 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:39:37.567Z,1521491977.567 [Default:CheckIn:D] Running Loop=1
2018-03-19T20:39:37.973Z,1521491977.973 [Default:CheckIn:D] Stopped
2018-03-19T20:39:37.973Z,1521491977.973 [Default:CheckIn:E] Running Loop=1
2018-03-19T20:39:38.337Z,1521491978.337 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.540031 min 
2018-03-19T20:39:38.337Z,1521491978.337 [Default:CheckIn:E] Stopped
2018-03-19T20:39:38.337Z,1521491978.337 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T20:39:38.337Z,1521491978.337 [Default:CheckIn] Stopped
2018-03-19T20:39:38.338Z,1521491978.338 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T20:39:38.338Z,1521491978.338 [Default:CheckIn](INFO): Running loop #8
2018-03-19T20:39:38.338Z,1521491978.338 [Default:CheckIn] Running Loop=8
2018-03-19T20:39:38.338Z,1521491978.338 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T20:39:38.338Z,1521491978.338 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T20:39:41.722Z,1521491981.722 [NAL9602](INFO): Powering up
2018-03-19T20:39:52.451Z,1521491992.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:39:52.908Z,1521491992.908 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:39:53.111Z,1521491993.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:40:10.937Z,1521492010.937 [NAL9602](INFO): SBD MO Status=0, MOMSN=4858, MT Status=0, MTMSN=0
2018-03-19T20:40:10.937Z,1521492010.937 [NAL9602](INFO): No messages in MT queue
2018-03-19T20:40:26.107Z,1521492026.107 [NAL9602](INFO): GPS fix at 20180319T204025: (36.802318, -121.786773)
2018-03-19T20:40:26.173Z,1521492026.173 [UniversalFixResidualReporter](INFO): Fix residual: 99.9 %DT, over the last 1609.4 m. Residual distance 1607.9 m at bearing 137.8 degrees. Fix at (36.8023, -121.7868) with 9.3 m made good.
2018-03-19T20:40:26.173Z,1521492026.173 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:40:26.173Z,1521492026.173 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:40:30.756Z,1521492030.756 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0036.lzma
2018-03-19T20:40:31.539Z,1521492031.539 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0036.lzma.bak
2018-03-19T20:40:31.540Z,1521492031.540 [DataOverHttps](IMPORTANT): SBD MOMSN=8138462, MTMSN=20180319T204031
2018-03-19T20:40:36.240Z,1521492036.240 [DataOverHttps](INFO): Received command:failc
2018-03-19T20:40:36.251Z,1521492036.251 [CommandLine](IMPORTANT): got command failComponent
2018-03-19T20:40:36.252Z,1521492036.252 [CommandLine](IMPORTANT): Failed components:
2018-03-19T20:40:36.252Z,1521492036.252 [CommandLine](IMPORTANT): No failed Components.
2018-03-19T20:40:41.208Z,1521492041.208 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0037.lzma
2018-03-19T20:40:41.999Z,1521492041.999 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0037.lzma.bak
2018-03-19T20:40:41.999Z,1521492041.999 [DataOverHttps](INFO): SBD MOMSN=8138466
2018-03-19T20:40:51.677Z,1521492051.677 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180319T193343/Courier0040.lzma
2018-03-19T20:40:52.475Z,1521492052.475 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0040.lzma.bak
2018-03-19T20:40:52.475Z,1521492052.475 [DataOverHttps](INFO): SBD MOMSN=8138469
2018-03-19T20:41:02.793Z,1521492062.793 [NAL9602](INFO): Powering down
2018-03-19T20:41:02.908Z,1521492062.908 [DataOverHttps](INFO): Sending 164 bytes from file Logs/20180319T193343/Express0041.lzma
2018-03-19T20:41:03.707Z,1521492063.707 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0041.lzma.bak
2018-03-19T20:41:03.707Z,1521492063.707 [DataOverHttps](INFO): SBD MOMSN=8138471
2018-03-19T20:41:04.166Z,1521492064.166 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:41:04.166Z,1521492064.166 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:41:04.166Z,1521492064.166 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:41:44.459Z,1521492104.459 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:41:45.135Z,1521492105.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:42:19.805Z,1521492139.805 [CommandLine](IMPORTANT): got command get BPC1.loadAtStartup
2018-03-19T20:42:19.806Z,1521492139.806 [CommandLine](IMPORTANT): BPC1.loadAtStartup 1 bool
2018-03-19T20:43:36.467Z,1521492216.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:43:37.119Z,1521492217.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:43:54.262Z,1521492234.262 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T20:45:57.315Z,1521492357.315 [CommandLine](IMPORTANT): got command failComponent
2018-03-19T20:45:57.315Z,1521492357.315 [CommandLine](IMPORTANT): Failed components:
2018-03-19T20:45:57.315Z,1521492357.315 [CommandLine](IMPORTANT): No failed Components.
2018-03-19T20:46:04.681Z,1521492364.681 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T20:46:04.682Z,1521492364.682 [Default:CheckIn:C.Wait] Stopped
2018-03-19T20:46:04.682Z,1521492364.682 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:46:04.682Z,1521492364.682 [Default:CheckIn:D] Running Loop=1
2018-03-19T20:46:05.090Z,1521492365.090 [Default:CheckIn:D] Stopped
2018-03-19T20:46:05.090Z,1521492365.090 [Default:CheckIn:E] Running Loop=1
2018-03-19T20:46:05.513Z,1521492365.513 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 68.991984 min 
2018-03-19T20:46:05.513Z,1521492365.513 [Default:CheckIn:E] Stopped
2018-03-19T20:46:05.513Z,1521492365.513 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T20:46:05.513Z,1521492365.513 [Default:CheckIn] Stopped
2018-03-19T20:46:05.513Z,1521492365.513 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T20:46:05.513Z,1521492365.513 [Default:CheckIn](INFO): Running loop #9
2018-03-19T20:46:05.514Z,1521492365.514 [Default:CheckIn] Running Loop=9
2018-03-19T20:46:05.514Z,1521492365.514 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T20:46:05.514Z,1521492365.514 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T20:46:08.816Z,1521492368.816 [NAL9602](INFO): Powering up
2018-03-19T20:46:19.988Z,1521492379.988 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:46:35.989Z,1521492395.989 [NAL9602](INFO): SBD MO Status=0, MOMSN=4859, MT Status=0, MTMSN=0
2018-03-19T20:46:35.989Z,1521492395.989 [NAL9602](INFO): No messages in MT queue
2018-03-19T20:46:48.801Z,1521492408.801 [NAL9602](INFO): GPS fix at 20180319T204647: (36.802281, -121.786811)
2018-03-19T20:46:48.920Z,1521492408.920 [UniversalFixResidualReporter](INFO): Fix residual: 100.0 %DT, over the last 1583.3 m. Residual distance 1582.6 m at bearing 137.2 degrees. Fix at (36.8023, -121.7868) with 5.3 m made good.
2018-03-19T20:46:48.921Z,1521492408.921 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:46:48.921Z,1521492408.921 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:46:53.447Z,1521492413.447 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0044.lzma
2018-03-19T20:46:54.249Z,1521492414.249 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0044.lzma.bak
2018-03-19T20:46:54.249Z,1521492414.249 [DataOverHttps](INFO): SBD MOMSN=8138478
2018-03-19T20:47:03.510Z,1521492423.510 [DataOverHttps](INFO): Sending 235 bytes from file Logs/20180319T193343/Express0045.lzma
2018-03-19T20:47:04.311Z,1521492424.311 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0045.lzma.bak
2018-03-19T20:47:04.312Z,1521492424.312 [DataOverHttps](INFO): SBD MOMSN=8138481
2018-03-19T20:47:04.784Z,1521492424.784 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:47:04.784Z,1521492424.784 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:47:04.785Z,1521492424.785 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:47:20.456Z,1521492440.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:47:21.111Z,1521492441.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:47:23.756Z,1521492443.756 [NAL9602](INFO): Powering down
2018-03-19T20:47:34.456Z,1521492454.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:47:35.111Z,1521492455.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:49:12.452Z,1521492552.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:49:13.116Z,1521492553.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:49:26.447Z,1521492566.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:49:27.111Z,1521492567.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:51:10.028Z,1521492670.028 [DataOverHttps](IMPORTANT): SBD MTMSN=20180319T205110
2018-03-19T20:51:15.415Z,1521492675.415 [DataOverHttps](INFO): Received command:load Science/sci2.xml;set sci2.NeedCommsTime 45 minute;set sci2.Lat1 36.797 degree;set sci2.Lon1 -121.847 degree;set sci2.YoYoMaxDepth 40 meter;set sci2.MaxDepth 50 meter;run 
2018-03-19T20:51:15.429Z,1521492675.429 [CommandLine](IMPORTANT): got command load ./Missions/Science/sci2.xml
2018-03-19T20:51:15.429Z,1521492675.429 [MissionManager](INFO): Loading Mission: ./Missions/Science/sci2.xml
2018-03-19T20:51:15.571Z,1521492675.571 [MissionManager](INFO): DefineArg sci2.MissionTimeout = 2.000000 h
2018-03-19T20:51:15.573Z,1521492675.573 [MissionManager](INFO): DefineArg sci2.NeedCommsTime = 60.000000 min
2018-03-19T20:51:15.576Z,1521492675.576 [MissionManager](INFO): DefineArg sci2.Repeat = 1.000000 count
2018-03-19T20:51:15.579Z,1521492675.579 [MissionManager](INFO): DefineArg sci2.Lat1 = nan arcdeg
2018-03-19T20:51:15.581Z,1521492675.581 [MissionManager](INFO): DefineArg sci2.Lon1 = nan arcdeg
2018-03-19T20:51:15.584Z,1521492675.584 [MissionManager](INFO): DefineArg sci2.Lat2 = nan arcdeg
2018-03-19T20:51:15.586Z,1521492675.586 [MissionManager](INFO): DefineArg sci2.Lon2 = nan arcdeg
2018-03-19T20:51:15.589Z,1521492675.589 [MissionManager](INFO): DefineArg sci2.Lat3 = nan arcdeg
2018-03-19T20:51:15.592Z,1521492675.592 [MissionManager](INFO): DefineArg sci2.Lon3 = nan arcdeg
2018-03-19T20:51:15.594Z,1521492675.594 [MissionManager](INFO): DefineArg sci2.Lat4 = nan arcdeg
2018-03-19T20:51:15.597Z,1521492675.597 [MissionManager](INFO): DefineArg sci2.Lon4 = nan arcdeg
2018-03-19T20:51:15.619Z,1521492675.619 [MissionManager](INFO): DefineArg sci2.Lat5 = nan arcdeg
2018-03-19T20:51:15.622Z,1521492675.622 [MissionManager](INFO): DefineArg sci2.Lon5 = nan arcdeg
2018-03-19T20:51:15.624Z,1521492675.624 [MissionManager](INFO): DefineArg sci2.Lat6 = nan arcdeg
2018-03-19T20:51:15.640Z,1521492675.640 [MissionManager](INFO): DefineArg sci2.Lon6 = nan arcdeg
2018-03-19T20:51:15.643Z,1521492675.643 [MissionManager](INFO): DefineArg sci2.Lat7 = nan arcdeg
2018-03-19T20:51:15.646Z,1521492675.646 [MissionManager](INFO): DefineArg sci2.Lon7 = nan arcdeg
2018-03-19T20:51:15.657Z,1521492675.657 [MissionManager](INFO): DefineArg sci2.Speed = 1.000000 m/s
2018-03-19T20:51:15.664Z,1521492675.664 [MissionManager](INFO): DefineArg sci2.YoYoMinDepth = 2.000000 m
2018-03-19T20:51:15.669Z,1521492675.669 [MissionManager](INFO): DefineArg sci2.YoYoMaxDepth = 200.000000 m
2018-03-19T20:51:15.680Z,1521492675.680 [MissionManager](INFO): DefineArg sci2.YoYoMinAltitude = 9.000000 m
2018-03-19T20:51:15.687Z,1521492675.687 [MissionManager](INFO): DefineArg sci2.YoYoUpPitch = 20.000000 arcdeg
2018-03-19T20:51:15.692Z,1521492675.692 [MissionManager](INFO): DefineArg sci2.YoYoDownPitch = -20.000000 arcdeg
2018-03-19T20:51:15.696Z,1521492675.696 [MissionManager](INFO): DefineArg sci2.BuoyancyNeutral = 315.000012 cc
2018-03-19T20:51:15.703Z,1521492675.703 [MissionManager](INFO): DefineArg sci2.MassDefault = -0.075000 cm
2018-03-19T20:51:15.719Z,1521492675.719 [MissionManager](INFO): DefineArg sci2.MinAltitude = 5.000000 m
2018-03-19T20:51:15.722Z,1521492675.722 [MissionManager](INFO): DefineArg sci2.MaxDepth = 205.000000 m
2018-03-19T20:51:15.728Z,1521492675.728 [MissionManager](INFO): DefineArg sci2.MinOffshore = 2.000000 km
2018-03-19T20:51:15.729Z,1521492675.729 [MissionManager](INFO): Inserting Stack: Missions/Insert/Science.xml
2018-03-19T20:51:16.009Z,1521492676.009 [MissionManager](INFO): DefineArg sci2:Science.SampleISUS = 0 bool
2018-03-19T20:51:16.012Z,1521492676.012 [MissionManager](INFO): DefineArg sci2:Science.SampleISUSmaxPitch = 60.000000 arcdeg
2018-03-19T20:51:16.029Z,1521492676.029 [MissionManager](INFO): DefineArg sci2:Science.SampleISUSminPitch = -60.000000 arcdeg
2018-03-19T20:51:16.031Z,1521492676.031 [MissionManager](INFO): DefineArg sci2:Science.PeakDetectChlActive = 0 bool
2018-03-19T20:51:16.034Z,1521492676.034 [MissionManager](INFO): DefineArg sci2:Science.HighestChlPeakReportActive = 0 bool
2018-03-19T20:51:16.036Z,1521492676.036 [MissionManager](INFO): DefineArg sci2:Science.PatchTracking = 0 bool
2018-03-19T20:51:16.063Z,1521492676.063 [MissionManager](INFO): DefineArg sci2:Science.FilterWidthHorizontal = 3.000000 count
2018-03-19T20:51:16.066Z,1521492676.066 [MissionManager](INFO): DefineArg sci2:Science.NumProfilesSlidingwindow = 100.000000 count
2018-03-19T20:51:16.069Z,1521492676.069 [MissionManager](INFO): DefineArg sci2:Science.PeakDetectNO3Active = 0 bool
2018-03-19T20:51:16.071Z,1521492676.071 [MissionManager](INFO): DefineArg sci2:Science.PeakDetectOilActive = 0 bool
2018-03-19T20:51:16.074Z,1521492676.074 [MissionManager](INFO): DefineArg sci2:Science.UpwardDerivativeOfTemperatureActive = 0 bool
2018-03-19T20:51:16.088Z,1521492676.088 [MissionManager](INFO): DefineArg sci2:Science.EnabledAanderaaO2 = 1.000000 bool
2018-03-19T20:51:16.091Z,1521492676.091 [MissionManager](INFO): DefineArg sci2:Science.EnabledNeilBrown = 1.000000 bool
2018-03-19T20:51:16.108Z,1521492676.108 [MissionManager](INFO): DefineArg sci2:Science.EnabledSeabird = 1.000000 bool
2018-03-19T20:51:16.113Z,1521492676.113 [MissionManager](INFO): DefineArg sci2:Science.EnabledTurbulence_NPS = 0.000000 bool
2018-03-19T20:51:16.125Z,1521492676.125 [MissionManager](INFO): DefineArg sci2:Science.EnabledWetLabsBB2FL = 1.000000 bool
2018-03-19T20:51:16.129Z,1521492676.129 [MissionManager](INFO): DefineArg sci2:Science.EnabledWetLabsSeaOWL_UV_A = 1.000000 bool
2018-03-19T20:51:16.142Z,1521492676.142 [MissionManager](INFO): DefineArg sci2:Science.EnabledISUS = 0.000000 bool
2018-03-19T20:51:16.149Z,1521492676.149 [MissionManager](INFO): DefineArg sci2:Science.LowPassWindowLength = 20.000000 count
2018-03-19T20:51:16.152Z,1521492676.152 [MissionManager](INFO): DefineArg sci2:Science.PeakChlShallowBound = nan m
2018-03-19T20:51:16.163Z,1521492676.163 [MissionManager](INFO): DefineArg sci2:Science.PeakChlDeepBound = nan m
2018-03-19T20:51:16.166Z,1521492676.166 [MissionManager](INFO): DefineOutput sci2:Science.PeakChl = 0.000000 ug/l
2018-03-19T20:51:16.177Z,1521492676.177 [MissionManager](INFO): DefineOutput sci2:Science.PeakChlDepth = 0.000000 m
2018-03-19T20:51:16.180Z,1521492676.180 [MissionManager](INFO): DefineOutput sci2:Science.PeakChlTemperature = 0.000000 degC
2018-03-19T20:51:16.187Z,1521492676.187 [MissionManager](INFO): DefineOutput sci2:Science.PeakChlLatitude = nan arcdeg
2018-03-19T20:51:16.190Z,1521492676.190 [MissionManager](INFO): DefineOutput sci2:Science.PeakChlLongitude = nan arcdeg
2018-03-19T20:51:16.197Z,1521492676.197 [MissionManager](INFO): DefineOutput sci2:Science.PeakNO3 = 0.000000 umol/l
2018-03-19T20:51:16.204Z,1521492676.204 [MissionManager](INFO): DefineOutput sci2:Science.PeakNO3Depth = 0.000000 m
2018-03-19T20:51:16.208Z,1521492676.208 [MissionManager](INFO): DefineOutput sci2:Science.PeakNO3Latitude = nan arcdeg
2018-03-19T20:51:16.223Z,1521492676.223 [MissionManager](INFO): DefineOutput sci2:Science.PeakNO3Longitude = nan arcdeg
2018-03-19T20:51:16.226Z,1521492676.226 [MissionManager](INFO): DefineOutput sci2:Science.PatchChl = 0.000000 m
2018-03-19T20:51:16.233Z,1521492676.233 [MissionManager](INFO): DefineOutput sci2:Science.PatchChlDepth = 0.000000 m
2018-03-19T20:51:16.237Z,1521492676.237 [MissionManager](INFO): DefineOutput sci2:Science.PatchChlLatitude = nan arcdeg
2018-03-19T20:51:16.248Z,1521492676.248 [MissionManager](INFO): DefineOutput sci2:Science.PatchChlLongitude = nan arcdeg
2018-03-19T20:51:16.255Z,1521492676.255 [MissionManager](INFO): DefineOutput sci2:Science.PatchChlDistance = nan arcdeg
2018-03-19T20:51:16.258Z,1521492676.258 [MissionManager](INFO): DefineOutput sci2:Science.PeakOil = 0.000000 kg/m3
2018-03-19T20:51:16.269Z,1521492676.269 [MissionManager](INFO): DefineOutput sci2:Science.PeakOilDepth = 0.000000 m
2018-03-19T20:51:16.273Z,1521492676.273 [MissionManager](INFO): DefineOutput sci2:Science.PeakOilLatitude = nan arcdeg
2018-03-19T20:51:16.284Z,1521492676.284 [MissionManager](INFO): DefineOutput sci2:Science.PeakOilLongitude = nan arcdeg
2018-03-19T20:51:16.320Z,1521492676.320 [sci2:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-03-19T20:51:16.350Z,1521492676.350 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal.
2018-03-19T20:51:16.374Z,1521492676.374 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-03-19T20:51:16.396Z,1521492676.396 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2018-03-19T20:51:16.419Z,1521492676.419 [MissionManager](INFO): RedefineArg sci2:Science.SampleISUS = value:1 bool
2018-03-19T20:51:16.421Z,1521492676.421 [MissionManager](INFO): RedefineArg sci2:Science.PeakDetectChlActive = value:1 bool
2018-03-19T20:51:16.421Z,1521492676.421 [MissionManager](INFO): Inserting Stack: Missions/Insert/NeedComms.xml
2018-03-19T20:51:16.509Z,1521492676.509 [MissionManager](INFO): DefineArg sci2:NeedComms.DiveInterval = 3.000000 h
2018-03-19T20:51:16.512Z,1521492676.512 [MissionManager](INFO): DefineArg sci2:NeedComms.WaitForPitchUp = 10.000000 min
2018-03-19T20:51:16.529Z,1521492676.529 [MissionManager](INFO): DefineArg sci2:NeedComms.SurfacePitch = 20.000000 arcdeg
2018-03-19T20:51:16.533Z,1521492676.533 [MissionManager](INFO): DefineArg sci2:NeedComms.SurfaceDepthRate = nan m/s
2018-03-19T20:51:16.536Z,1521492676.536 [MissionManager](INFO): DefineArg sci2:NeedComms.SurfaceSpeed = 1.000000 m/s
2018-03-19T20:51:16.558Z,1521492676.558 [MissionManager](INFO): DefineArg sci2:NeedComms.GPSTimeout = 7.000000 min
2018-03-19T20:51:16.561Z,1521492676.561 [MissionManager](INFO): DefineArg sci2:NeedComms.CommsTimeout = 30.000000 min
2018-03-19T20:51:16.577Z,1521492676.577 [sci2:NeedComms:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-03-19T20:51:16.612Z,1521492676.612 [MissionManager](INFO): Inserting Stack: Missions/Insert/StandardEnvelopes.xml
2018-03-19T20:51:16.652Z,1521492676.652 [MissionManager](INFO): DefineArg sci2:StandardEnvelopes.MinAltitude = 5.000000 m
2018-03-19T20:51:16.655Z,1521492676.655 [MissionManager](INFO): DefineArg sci2:StandardEnvelopes.MaxDepth = 200.000000 m
2018-03-19T20:51:16.658Z,1521492676.658 [MissionManager](INFO): DefineArg sci2:StandardEnvelopes.MinOffshore = 2000.000000 m
2018-03-19T20:51:16.659Z,1521492676.659 [sci2:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope.
2018-03-19T20:51:16.686Z,1521492676.686 [sci2:StandardEnvelopes:B.DepthEnvelope](DEBUG): Construct DepthEnvelope.
2018-03-19T20:51:16.705Z,1521492676.705 [sci2:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Construct OffshoreEnvelope.
2018-03-19T20:51:16.737Z,1521492676.737 [sci2:I.Pitch](DEBUG): Construct.
2018-03-19T20:51:16.753Z,1521492676.753 [sci2:J.Buoyancy](DEBUG): Construct Buoyancy.
2018-03-19T20:51:16.756Z,1521492676.756 [sci2:K.SetSpeed](DEBUG): Construct.
2018-03-19T20:51:16.779Z,1521492676.779 [sci2:L.DepthEnvelope](DEBUG): Construct DepthEnvelope.
2018-03-19T20:51:16.798Z,1521492676.798 [sci2:M.AltitudeEnvelope](DEBUG): Construct AltitudeEnvelope.
2018-03-19T20:51:16.805Z,1521492676.805 [sci2:N.YoYo](DEBUG): Construct YoYo.
2018-03-19T20:51:16.837Z,1521492676.837 [sci2:Lap:Wpt1:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-19T20:51:16.863Z,1521492676.863 [sci2:Lap:Wpt2:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-19T20:51:16.870Z,1521492676.870 [sci2:Lap:Wpt3:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-19T20:51:16.888Z,1521492676.888 [sci2:Lap:Wpt4:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-19T20:51:16.906Z,1521492676.906 [sci2:Lap:Wpt5:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-19T20:51:16.914Z,1521492676.914 [sci2:Lap:Wpt6:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-19T20:51:16.938Z,1521492676.938 [sci2:Lap:Wpt7:A.Waypoint](DEBUG): Construct Waypoint.
2018-03-19T20:51:16.993Z,1521492676.993 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance"
       xmlns:Trigger="Tethys/Trigger"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Trigger http://okeanids.mbari.org/tethys/Xml/Trigger.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="sci2">

    <Description>
        Vehicle yo-yo's to the specified waypoints, with science turned on.
    </Description>

<!-- Almost every mission should start with an overall timeout and a NeedCommsTime. -->

    <DefineArg Name="MissionTimeout"><Description>
        Maximum duration of mission
    </Description><Units:hour/><Value>2</Value></DefineArg>

    <DefineArg Name="NeedCommsTime"><Description>
        How often to surface for commumications
    </Description><Units:minute/><Value>60</Value></DefineArg>

<!-- You probably need to change these. -->

    <DefineArg Name="Repeat"><Description>
        Number of times the vehicle should try to cycle through waypoints..
    </Description><Units:count/><Value>1</Value></DefineArg>

    <DefineArg Name="Lat1"><Description>
        Latitude of waypoint 1. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon1"><Description>
        Longitude of waypoint 1. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat2"><Description>
        Latitude of waypoint 2. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon2"><Description>
        Longitude of waypoint 2. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat3"><Description>
        Latitude of waypoint 3. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon3"><Description>
        Longitude of waypoint 3. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat4"><Description>
        Latitude of waypoint 4. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon4"><Description>
        Longitude of waypoint 4. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat5"><Description>
        Latitude of waypoint 5. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon5"><Description>
        Longitude of waypoint 5. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat6"><Description>
        Latitude of waypoint 6. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon6"><Description>
        Longitude of waypoint 6. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lat7"><Description>
        Latitude of waypoint 7. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

    <DefineArg Name="Lon7"><Description>
        Longitude of waypoint 7. If nan, waypoint is skipped.
    </Description><Units:degree/><Value>NaN</Value></DefineArg>

<!-- You probably do not need to change these. -->

    <DefineArg Name="Speed"><Description>
        Speed while performing the YoYo behavior.
    </Description><Units:meter_per_second/><Value>1</Value></DefineArg>

    <DefineArg Name="YoYoMinDepth"><Description>
        Minimum depth while performing the YoYo behavior.
    </Description><Units:meter/><Value>2</Value></DefineArg>

    <DefineArg Name="YoYoMaxDepth"><Description>
        Maximum depth while performing the YoYo behavior.
    </Description><Units:meter/><Value>200</Value></DefineArg>

    <DefineArg Name="YoYoMinAltitude"><Description>
        Minimum altitude while performing the YoYo behavior (for
        bottom-terminated YoYos).
    </Description><Units:meter/><Value>9</Value></DefineArg>

    <DefineArg Name="YoYoUpPitch"><Description>
        Vehicle up pitch while performing the YoYo behavior.
    </Description><Units:degree/><Value>20</Value></DefineArg>

    <DefineArg Name="YoYoDownPitch"><Description>
        Vehicle down pitch while performing the YoYo behavior.
    </Description><Units:degree/><Value>-20</Value></DefineArg>

<!-- You are even less likely to need to change these. -->

    <DefineArg Name="BuoyancyNeutral"><Description>
        Buoyancy bladder position while performing the YoYo behavior. Defaults
        to buoyancyNeutral setting in the Config/Control.cfg file. Set to NaN cc
        for active buoyancy
    </Description><Control:VerticalControl.buoyancyNeutral/></DefineArg>

    <DefineArg Name="MassDefault"><Description>
        Static setting for mass during the mission. Set to NaN mm for active
        mass position
    </Description><Control:VerticalControl.massDefault/></DefineArg>

<!--
    <DefineArg Name="CommsTimeout"><Description>
        Maximum time to try communicating before diving again.
    </Description><Units:minute/><Value>30</Value></DefineArg>
-->

    <DefineArg Name="MinAltitude"><Description>
        Minimum height above the sea floor for the entire mission.
    </Description><Units:meter/><Value>5</Value></DefineArg>

    <DefineArg Name="MaxDepth"><Description>
        Maximum depth for the entire mission.
    </Description><Units:meter/><Value>205</Value></DefineArg>

    <DefineArg Name="MinOffshore"><Description>
        Minimum offshore distance for the entire mission.
    </Description><Units:kilometer/><Value>2</Value></DefineArg>

<!-- Missions should almost always start with a timeout -->

    <Timeout Duration="MissionTimeout"/>

    <Insert Filename="Insert/Science.xml">
        <Description>
            Most missions will run the science sensors. If you don't place this
            aggregate above NeedComms, science instruments get turned off on the
            last upcast and while floating on the surface.
        </Description>
        <RedefineArg Name="SampleISUS"><True/></RedefineArg>
        <RedefineArg Name="PeakDetectChlActive"><True/></RedefineArg>
    </Insert>

<!-- Most missions should use the NeedComms aggregate. -->

    <Insert Filename="Insert/NeedComms.xml" Id="NeedComms"/>

    <Assign><Sequence/><Arg Name="NeedComms:DiveInterval"/><Arg Name="NeedCommsTime"/></Assign>

<!--    <Assign><Sequence/><Arg Name="NeedComms:CommsTimeout"/><Arg Name="CommsTimeout"/></Assign> -->

<!-- Missions should almost always start with standard safety envelopes; most missions should not expose the parameters of these envelopes. -->

    <Insert Filename="Insert/StandardEnvelopes.xml"/>

    <Assign><Sequence/><Arg Name="StandardEnvelopes:MinAltitude"/><Arg Name="MinAltitude"/></Assign>

    <Assign><Sequence/><Arg Name="StandardEnvelopes:MaxDepth"/><Arg Name="MaxDepth"/></Assign>

    <Assign><Sequence/><Arg Name="StandardEnvelopes:MinOffshore"/><Arg Name="MinOffshore"/></Assign>

<!-- Check for additional instructions first. -->

    <Call Id="StartingMission" RefId="NeedComms"/>

<!-- Many missions will keep mass position and buoyancy volume fixed at defaults. -->

    <Guidance:Pitch>
        <Parallel/>
        <Setting><Guidance:Pitch.massPosition/><Arg Name="MassDefault"/></Setting>
    </Guidance:Pitch>

    <Guidance:Buoyancy>
        <Parallel/>
        <Setting><Guidance:Buoyancy.position/><Arg Name="BuoyancyNeutral"/></Setting>
    </Guidance:Buoyancy>

    <Guidance:SetSpeed>
        <Parallel/>
        <Setting><Guidance:SetSpeed.speed/><Arg Name="Speed"/></Setting>
    </Guidance:SetSpeed>

    <Guidance:DepthEnvelope>
        <Description>
            Another depth envelope for the YoYo behavior. This envelope should
            fall within the limits of the standard safety envelopes in
            Insert/StandardEnvelopes.xml in order to avoid commanding high pitch
            angles for depth-terminated YoYos.
        </Description>
        <Parallel/>
        <Setting><Guidance:DepthEnvelope.minDepth/><Arg Name="YoYoMinDepth"/></Setting>
        <Setting><Guidance:DepthEnvelope.maxDepth/><Arg Name="YoYoMaxDepth"/></Setting>
        <Setting><Guidance:DepthEnvelope.downPitch/><Arg Name="YoYoDownPitch"/></Setting>
        <Setting><Guidance:DepthEnvelope.upPitch/><Arg Name="YoYoUpPitch"/></Setting>
    </Guidance:DepthEnvelope>

    <Guidance:AltitudeEnvelope>
        <Description>
            Another altitude envelope for the YoYo behavior. This envelope
            should fall within the limits of the standard safety envelopes in
            Insert/StandardEnvelopes.xml in order to avoid commanding high pitch
            angles for bottom-terminated YoYos.
        </Description>
        <Parallel/>
        <Setting><Guidance:AltitudeEnvelope.minAltitude/><Arg Name="YoYoMinAltitude"/></Setting>
        <Setting><Guidance:AltitudeEnvelope.upPitch/><Arg Name="YoYoUpPitch"/></Setting>
    </Guidance:AltitudeEnvelope>

    <Guidance:YoYo>
        <Parallel/>
        <Setting><Guidance:YoYo.downPitch/><Arg Name="YoYoDownPitch"/></Setting>
        <Setting><Guidance:YoYo.upPitch/><Arg Name="YoYoUpPitch"/></Setting>
    </Guidance:YoYo>

    <Aggregate Id="Lap">

        <Sequence Repeat="Repeat"/>

        <Aggregate Id="Wpt1">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat1"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon1"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt2">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat2"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon2"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt3">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat3"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon3"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt4">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat4"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon4"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt5">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat5"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon5"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt6">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat6"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon6"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

        <Aggregate Id="Wpt7">

            <Sequence/>

            <Guidance:Waypoint>
                <Sequence/>
                <Setting><Guidance:Waypoint.latitude/><Arg Name="Lat7"/></Setting>
                <Setting><Guidance:Waypoint.longitude/><Arg Name="Lon7"/></Setting>
            </Guidance:Waypoint>

        </Aggregate>

    </Aggregate>

</Mission>


2018-03-19T20:51:16.993Z,1521492676.993 [CommandLine](IMPORTANT): Loaded ./Missions/Science/sci2.xml
2018-03-19T20:51:18.451Z,1521492678.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:51:19.111Z,1521492679.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:51:21.732Z,1521492681.732 [CommandLine](IMPORTANT): got command set sci2.NeedCommsTime 45.000000 minute
2018-03-19T20:51:21.733Z,1521492681.733 [CommandLine](IMPORTANT): got command set sci2.Lat1 36.797001 degree
2018-03-19T20:51:21.734Z,1521492681.734 [CommandLine](IMPORTANT): got command set sci2.Lon1 -121.847000 degree
2018-03-19T20:51:21.750Z,1521492681.750 [CommandLine](IMPORTANT): got command set sci2.YoYoMaxDepth 40.000000 meter
2018-03-19T20:51:21.751Z,1521492681.751 [CommandLine](IMPORTANT): got command set sci2.MaxDepth 50.000000 meter
2018-03-19T20:51:21.751Z,1521492681.751 [CommandLine](IMPORTANT): got command run 
2018-03-19T20:51:21.754Z,1521492681.754 [CommandLine](IMPORTANT): Running 
2018-03-19T20:51:21.824Z,1521492681.824 [Default] Stopped
2018-03-19T20:51:21.824Z,1521492681.824 [Default](DEBUG): Aggregate::uninitialize Default
2018-03-19T20:51:21.824Z,1521492681.824 [Default:B.GoToSurface] Stopped
2018-03-19T20:51:21.824Z,1521492681.824 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-19T20:51:21.824Z,1521492681.824 [Default:CheckIn] Stopped
2018-03-19T20:51:21.824Z,1521492681.824 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T20:51:21.824Z,1521492681.824 [Default:CheckIn:C.Wait] Stopped
2018-03-19T20:51:21.824Z,1521492681.824 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:51:21.825Z,1521492681.825 [MissionManager](IMPORTANT): Started mission sci2
2018-03-19T20:51:21.825Z,1521492681.825 [sci2] Running Loop=1
2018-03-19T20:51:21.825Z,1521492681.825 [sci2](DEBUG): Aggregate::initialize sci2
2018-03-19T20:51:21.825Z,1521492681.825 [sci2:Science] Running Loop=1
2018-03-19T20:51:21.825Z,1521492681.825 [sci2:Science](DEBUG): Aggregate::initialize sci2:Science
2018-03-19T20:51:21.825Z,1521492681.825 [sci2:Science:A] Running Loop=1
2018-03-19T20:51:21.825Z,1521492681.825 [sci2:Science:B] Running Loop=1
2018-03-19T20:51:21.825Z,1521492681.825 [sci2:Science:C] Running Loop=1
2018-03-19T20:51:21.825Z,1521492681.825 [sci2:Science:D] Running Loop=1
2018-03-19T20:51:21.826Z,1521492681.826 [sci2:Science:E] Running Loop=1
2018-03-19T20:51:21.826Z,1521492681.826 [sci2:Science:F] Running Loop=1
2018-03-19T20:51:21.826Z,1521492681.826 [sci2:Science:G] Running Loop=1
2018-03-19T20:51:21.826Z,1521492681.826 [sci2:Science:Read_Oil] Running Loop=1
2018-03-19T20:51:21.826Z,1521492681.826 [sci2:Science:PeakDetectChl] Running Loop=1
2018-03-19T20:51:21.826Z,1521492681.826 [sci2:Science:PeakDetectChl](DEBUG): Aggregate::initialize sci2:Science:PeakDetectChl
2018-03-19T20:51:21.826Z,1521492681.826 [sci2:Science:PeakDetectChl:A.PeakDetectVsDepth] Running Loop=1
2018-03-19T20:51:21.826Z,1521492681.826 [sci2:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-03-19T20:51:21.832Z,1521492681.832 [sci2:Science:HighestChlPeakReport] Running Loop=1
2018-03-19T20:51:21.832Z,1521492681.832 [sci2:Science:HighestChlPeakReport](DEBUG): Aggregate::initialize sci2:Science:HighestChlPeakReport
2018-03-19T20:51:21.832Z,1521492681.832 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Running Loop=1
2018-03-19T20:51:21.832Z,1521492681.832 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal](INFO): Initialize.
2018-03-19T20:51:21.833Z,1521492681.833 [sci2:Science:PeakDetectNO3] Running Loop=1
2018-03-19T20:51:21.833Z,1521492681.833 [sci2:Science:PeakDetectNO3](DEBUG): Aggregate::initialize sci2:Science:PeakDetectNO3
2018-03-19T20:51:21.833Z,1521492681.833 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth] Running Loop=1
2018-03-19T20:51:21.833Z,1521492681.833 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-03-19T20:51:21.839Z,1521492681.839 [sci2:Science:PeakDetectOil] Running Loop=1
2018-03-19T20:51:21.839Z,1521492681.839 [sci2:Science:PeakDetectOil](DEBUG): Aggregate::initialize sci2:Science:PeakDetectOil
2018-03-19T20:51:21.839Z,1521492681.839 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth] Running Loop=1
2018-03-19T20:51:21.839Z,1521492681.839 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Initialize.
2018-03-19T20:51:21.841Z,1521492681.841 [sci2:StandardEnvelopes] Running Loop=1
2018-03-19T20:51:21.841Z,1521492681.841 [sci2:StandardEnvelopes](DEBUG): Aggregate::initialize sci2:StandardEnvelopes
2018-03-19T20:51:21.841Z,1521492681.841 [sci2:StandardEnvelopes:A.AltitudeEnvelope] Running Loop=1
2018-03-19T20:51:21.841Z,1521492681.841 [sci2:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent.
2018-03-19T20:51:21.842Z,1521492681.842 [sci2:StandardEnvelopes:B.DepthEnvelope] Running Loop=1
2018-03-19T20:51:21.842Z,1521492681.842 [sci2:StandardEnvelopes:B.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent.
2018-03-19T20:51:21.842Z,1521492681.842 [sci2:StandardEnvelopes:C.OffshoreEnvelope] Running Loop=1
2018-03-19T20:51:21.842Z,1521492681.842 [sci2:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Initialize OffshoreEnvelopeComponent.
2018-03-19T20:51:21.842Z,1521492681.842 [sci2:I.Pitch] Running Loop=1
2018-03-19T20:51:21.846Z,1521492681.846 [sci2:I.Pitch](DEBUG): Initialize.
2018-03-19T20:51:21.847Z,1521492681.847 [sci2:J.Buoyancy] Running Loop=1
2018-03-19T20:51:21.847Z,1521492681.847 [sci2:J.Buoyancy](DEBUG): Initialize Buoyancy Component.
2018-03-19T20:51:21.847Z,1521492681.847 [sci2:K.SetSpeed] Running Loop=1
2018-03-19T20:51:21.847Z,1521492681.847 [sci2:K.SetSpeed](DEBUG): Initialize.
2018-03-19T20:51:21.847Z,1521492681.847 [sci2:L.DepthEnvelope] Running Loop=1
2018-03-19T20:51:21.847Z,1521492681.847 [sci2:L.DepthEnvelope](DEBUG): Initialize DepthEnvelopeComponent.
2018-03-19T20:51:21.847Z,1521492681.847 [sci2:M.AltitudeEnvelope] Running Loop=1
2018-03-19T20:51:21.847Z,1521492681.847 [sci2:M.AltitudeEnvelope](DEBUG): Initialize AltitudeEnvelopeComponent.
2018-03-19T20:51:21.848Z,1521492681.848 [sci2:N.YoYo] Running Loop=1
2018-03-19T20:51:21.848Z,1521492681.848 [sci2:N.YoYo](DEBUG): Initialize YoYoComponent.
2018-03-19T20:51:21.848Z,1521492681.848 [sci2:C] Running Loop=1
2018-03-19T20:51:21.849Z,1521492681.849 [sci2:N.YoYo] Running Loop=1
2018-03-19T20:51:21.858Z,1521492681.858 [sci2:M.AltitudeEnvelope] Running Loop=1
2018-03-19T20:51:21.872Z,1521492681.872 [sci2:L.DepthEnvelope] Running Loop=1
2018-03-19T20:51:21.877Z,1521492681.877 [sci2:K.SetSpeed] Running Loop=1
2018-03-19T20:51:21.890Z,1521492681.890 [sci2:J.Buoyancy] Running Loop=1
2018-03-19T20:51:21.894Z,1521492681.894 [sci2:I.Pitch] Running Loop=1
2018-03-19T20:51:21.908Z,1521492681.908 [sci2:StandardEnvelopes] Running Loop=1
2018-03-19T20:51:21.908Z,1521492681.908 [sci2:StandardEnvelopes:C.OffshoreEnvelope] Running Loop=1
2018-03-19T20:51:21.938Z,1521492681.938 [sci2:StandardEnvelopes:B.DepthEnvelope] Running Loop=1
2018-03-19T20:51:21.951Z,1521492681.951 [sci2:StandardEnvelopes:A.AltitudeEnvelope] Running Loop=1
2018-03-19T20:51:21.968Z,1521492681.968 [sci2:C] Stopped
2018-03-19T20:51:21.969Z,1521492681.969 [sci2:E] Running Loop=1
2018-03-19T20:51:21.969Z,1521492681.969 [sci2:Science] Running Loop=1
2018-03-19T20:51:21.972Z,1521492681.972 [sci2:Science:PeakDetectOil] Stopped
2018-03-19T20:51:21.972Z,1521492681.972 [sci2:Science:PeakDetectOil](DEBUG): Aggregate::uninitialize sci2:Science:PeakDetectOil
2018-03-19T20:51:21.972Z,1521492681.972 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth] Stopped
2018-03-19T20:51:21.972Z,1521492681.972 [sci2:Science:PeakDetectOil:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2018-03-19T20:51:21.972Z,1521492681.972 [sci2:Science:PeakDetectNO3] Stopped
2018-03-19T20:51:21.972Z,1521492681.972 [sci2:Science:PeakDetectNO3](DEBUG): Aggregate::uninitialize sci2:Science:PeakDetectNO3
2018-03-19T20:51:21.973Z,1521492681.973 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth] Stopped
2018-03-19T20:51:21.973Z,1521492681.973 [sci2:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2018-03-19T20:51:21.973Z,1521492681.973 [sci2:Science:HighestChlPeakReport] Stopped
2018-03-19T20:51:21.973Z,1521492681.973 [sci2:Science:HighestChlPeakReport](DEBUG): Aggregate::uninitialize sci2:Science:HighestChlPeakReport
2018-03-19T20:51:21.973Z,1521492681.973 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Stopped
2018-03-19T20:51:21.973Z,1521492681.973 [sci2:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Uninitialize.
2018-03-19T20:51:21.973Z,1521492681.973 [sci2:Science:PeakDetectChl] Running Loop=1
2018-03-19T20:51:21.977Z,1521492681.977 [sci2:Science:Read_Oil] Running Loop=1
2018-03-19T20:51:21.978Z,1521492681.978 [sci2:Science:Read_Oil](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_petroleum_hydrocarbons_in_sea_water
2018-03-19T20:51:21.980Z,1521492681.980 [sci2:Science:G] Running Loop=1
2018-03-19T20:51:21.981Z,1521492681.981 [sci2:Science:G](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_chlorophyll_in_sea_water
2018-03-19T20:51:21.982Z,1521492681.982 [sci2:Science:F] Stopped
2018-03-19T20:51:21.982Z,1521492681.982 [sci2:Science:E] Stopped
2018-03-19T20:51:21.982Z,1521492681.982 [sci2:Science:D] Running Loop=1
2018-03-19T20:51:21.983Z,1521492681.983 [sci2:Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_temperature
2018-03-19T20:51:21.983Z,1521492681.983 [sci2:Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_salinity
2018-03-19T20:51:21.985Z,1521492681.985 [sci2:Science:C] Running Loop=1
2018-03-19T20:51:21.985Z,1521492681.985 [sci2:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_temperature
2018-03-19T20:51:21.986Z,1521492681.986 [sci2:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_salinity
2018-03-19T20:51:21.987Z,1521492681.987 [sci2:Science:B] Stopped
2018-03-19T20:51:21.987Z,1521492681.987 [sci2:Science:A] Running Loop=1
2018-03-19T20:51:21.988Z,1521492681.988 [sci2:Science:A](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_oxygen_in_sea_water
2018-03-19T20:51:22.112Z,1521492682.112 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2018-03-19T20:51:22.119Z,1521492682.119 [CTD_NeilBrown](INFO): Opening uart, block timeout 10ths=4
2018-03-19T20:51:22.150Z,1521492682.150 [sci2:E] Stopped
2018-03-19T20:51:22.155Z,1521492682.155 [sci2:F] Running Loop=1
2018-03-19T20:51:22.199Z,1521492682.199 [WetLabsBB2FL](INFO): Opening uart, block timeout 10ths=2
2018-03-19T20:51:22.199Z,1521492682.199 [WetLabsBB2FL](INFO): Powering up
2018-03-19T20:51:22.255Z,1521492682.255 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:22.283Z,1521492682.283 [CTD_Seabird](INFO): Initializing
2018-03-19T20:51:22.284Z,1521492682.284 [CTD_Seabird](INFO): Checking LCM
2018-03-19T20:51:22.284Z,1521492682.284 [CTD_Seabird](INFO): LCM OK
2018-03-19T20:51:22.284Z,1521492682.284 [CTD_Seabird](INFO): Powering up
2018-03-19T20:51:22.541Z,1521492682.541 [sci2:F] Stopped
2018-03-19T20:51:22.541Z,1521492682.541 [sci2:G] Running Loop=1
2018-03-19T20:51:22.666Z,1521492682.666 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:22.911Z,1521492682.911 [ThrusterServo](FAULT): getVelocity uart error serial timeout
2018-03-19T20:51:22.911Z,1521492682.911 [ThrusterServo](FAULT): Thruster uart error: serial timeout
2018-03-19T20:51:22.911Z,1521492682.911 [ThrusterServo] Communications Fault, FailCount= 1
2018-03-19T20:51:22.911Z,1521492682.911 [ThrusterServo](ERROR): Communications Fault
2018-03-19T20:51:22.915Z,1521492682.915 [CBIT](ERROR): Communications Fault in component: ThrusterServo
2018-03-19T20:51:23.008Z,1521492683.008 [sci2:G] Stopped
2018-03-19T20:51:23.008Z,1521492683.008 [sci2:StartingMission] Running Loop=1
2018-03-19T20:51:23.008Z,1521492683.008 [sci2:StartingMission](DEBUG): Aggregate::initialize sci2:StartingMission
2018-03-19T20:51:23.079Z,1521492683.079 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:23.187Z,1521492683.187 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2018-03-19T20:51:23.187Z,1521492683.187 [ThrusterServo](INFO): Powering down
2018-03-19T20:51:23.397Z,1521492683.397 [sci2:NeedComms] Running Loop=1
2018-03-19T20:51:23.397Z,1521492683.397 [sci2:NeedComms](DEBUG): Aggregate::initialize sci2:NeedComms
2018-03-19T20:51:23.397Z,1521492683.397 [sci2:NeedComms:B.GoToSurface] Running Loop=1
2018-03-19T20:51:23.397Z,1521492683.397 [sci2:NeedComms:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-19T20:51:23.397Z,1521492683.397 [sci2:NeedComms:B.GoToSurface](INFO): Received depth rate setting nan m/s.
2018-03-19T20:51:23.398Z,1521492683.398 [sci2:NeedComms:B.GoToSurface](INFO): Received pitch setting 19.999999 degrees.
2018-03-19T20:51:23.398Z,1521492683.398 [sci2:NeedComms:B.GoToSurface](INFO): Received speed setting 1.000000 m/s.
2018-03-19T20:51:23.415Z,1521492683.415 [sci2:NeedComms:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-19T20:51:23.415Z,1521492683.415 [sci2:NeedComms:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-03-19T20:51:23.415Z,1521492683.415 [sci2:NeedComms:A] Running Loop=1
2018-03-19T20:51:23.425Z,1521492683.425 [sci2:NeedComms:A](INFO): last time_fix was: 1521492407.500000 second since 1970/01/01T00:00:00Z 
2018-03-19T20:51:23.426Z,1521492683.426 [sci2:NeedComms:A] Stopped
2018-03-19T20:51:23.483Z,1521492683.483 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:23.603Z,1521492683.603 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11062.319336 psu
2018-03-19T20:51:23.618Z,1521492683.618 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:23.807Z,1521492683.807 [CTD_NeilBrown](ERROR): Salinity reading out of range: -669.739319 psu
2018-03-19T20:51:23.812Z,1521492683.812 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:23.859Z,1521492683.859 [sci2:NeedComms:C] Running Loop=1
2018-03-19T20:51:24.031Z,1521492684.031 [CTD_NeilBrown](ERROR): Salinity reading out of range: -10800.023438 psu
2018-03-19T20:51:24.036Z,1521492684.036 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:24.127Z,1521492684.127 [CBIT](INFO): Clearing failed state for component ThrusterServo
2018-03-19T20:51:24.127Z,1521492684.127 [ThrusterServo] No Fault, FailCount= 1
2018-03-19T20:51:24.240Z,1521492684.240 [CTD_NeilBrown](ERROR): Salinity reading out of range: -8372.482422 psu
2018-03-19T20:51:24.246Z,1521492684.246 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:24.277Z,1521492684.277 [sci2:NeedComms:C](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-03-19T20:51:24.347Z,1521492684.347 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-03-19T20:51:24.355Z,1521492684.355 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-03-19T20:51:24.451Z,1521492684.451 [CTD_NeilBrown](ERROR): Salinity reading out of range: -33832.500000 psu
2018-03-19T20:51:24.456Z,1521492684.456 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:24.547Z,1521492684.547 [NAL9602](INFO): Powering up
2018-03-19T20:51:24.686Z,1521492684.686 [CTD_NeilBrown](ERROR): Salinity reading out of range: 39062820.000000 psu
2018-03-19T20:51:24.691Z,1521492684.691 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:24.891Z,1521492684.891 [CTD_NeilBrown](ERROR): Salinity reading out of range: -34617.800781 psu
2018-03-19T20:51:24.896Z,1521492684.896 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:25.199Z,1521492685.199 [CTD_NeilBrown](ERROR): Salinity reading out of range: -17403.888672 psu
2018-03-19T20:51:25.205Z,1521492685.205 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:25.427Z,1521492685.427 [CTD_NeilBrown](ERROR): Salinity reading out of range: 1003.819824 psu
2018-03-19T20:51:25.432Z,1521492685.432 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:25.632Z,1521492685.632 [CTD_NeilBrown](ERROR): Salinity reading out of range: -26928.535156 psu
2018-03-19T20:51:25.639Z,1521492685.639 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:25.853Z,1521492685.853 [CTD_NeilBrown](ERROR): Salinity reading out of range: 594.943604 psu
2018-03-19T20:51:25.856Z,1521492685.856 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:26.071Z,1521492686.071 [CTD_NeilBrown](ERROR): Salinity reading out of range: -31488892.000000 psu
2018-03-19T20:51:26.076Z,1521492686.076 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:26.284Z,1521492686.284 [CTD_NeilBrown](ERROR): Salinity reading out of range: -13128.753906 psu
2018-03-19T20:51:26.288Z,1521492686.288 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:26.497Z,1521492686.497 [CTD_NeilBrown](ERROR): Salinity reading out of range: -40879.300781 psu
2018-03-19T20:51:26.502Z,1521492686.502 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:26.522Z,1521492686.522 [Reporter](INFO): platform_buoyancy_position 954.325835 cc
2018-03-19T20:51:26.803Z,1521492686.803 [CTD_NeilBrown](ERROR): Salinity reading out of range: -730.449280 psu
2018-03-19T20:51:26.808Z,1521492686.808 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:27.015Z,1521492687.015 [CTD_NeilBrown](ERROR): Salinity reading out of range: -9299283.000000 psu
2018-03-19T20:51:27.019Z,1521492687.019 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:27.228Z,1521492687.228 [CTD_NeilBrown](ERROR): Salinity reading out of range: -15551.468750 psu
2018-03-19T20:51:27.236Z,1521492687.236 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:27.451Z,1521492687.451 [CTD_NeilBrown](ERROR): Salinity reading out of range: 633.515015 psu
2018-03-19T20:51:27.455Z,1521492687.455 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:27.667Z,1521492687.667 [CTD_NeilBrown](ERROR): Salinity reading out of range: -17234.613281 psu
2018-03-19T20:51:27.676Z,1521492687.676 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:27.767Z,1521492687.767 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-19T20:51:27.875Z,1521492687.875 [CTD_NeilBrown](ERROR): Salinity reading out of range: -1928802.000000 psu
2018-03-19T20:51:27.880Z,1521492687.880 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:27.973Z,1521492687.973 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-03-19T20:51:27.975Z,1521492687.975 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-03-19T20:51:28.091Z,1521492688.091 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7524.504395 psu
2018-03-19T20:51:28.096Z,1521492688.096 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:28.414Z,1521492688.414 [CTD_NeilBrown](ERROR): Salinity reading out of range: -12888.184570 psu
2018-03-19T20:51:28.419Z,1521492688.419 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:28.613Z,1521492688.613 [CTD_NeilBrown](ERROR): Salinity reading out of range: -2905.831299 psu
2018-03-19T20:51:28.627Z,1521492688.627 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:28.822Z,1521492688.822 [CTD_NeilBrown](ERROR): Salinity reading out of range: -726.570312 psu
2018-03-19T20:51:28.836Z,1521492688.836 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:29.035Z,1521492689.035 [CTD_NeilBrown](ERROR): Salinity reading out of range: -24741.039062 psu
2018-03-19T20:51:29.040Z,1521492689.040 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:29.253Z,1521492689.253 [CTD_NeilBrown](ERROR): Salinity reading out of range: -8981.113281 psu
2018-03-19T20:51:29.288Z,1521492689.288 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:29.467Z,1521492689.467 [CTD_NeilBrown](ERROR): Salinity reading out of range: -8560.163086 psu
2018-03-19T20:51:29.471Z,1521492689.471 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:29.672Z,1521492689.672 [CTD_NeilBrown](ERROR): Salinity reading out of range: -14525.329102 psu
2018-03-19T20:51:29.679Z,1521492689.679 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:29.743Z,1521492689.743 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:29.825Z,1521492689.825 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	241		224.964		79.653		20.260		30.953		30.953		39.658		8.705		433.9		634.6		89.0	



2018-03-19T20:51:29.826Z,1521492689.826 [Aanderaa_O2](DEBUG): Error parsing device response
2018-03-19T20:51:29.895Z,1521492689.895 [CTD_NeilBrown](ERROR): Salinity reading out of range: -15384.459961 psu
2018-03-19T20:51:29.899Z,1521492689.899 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:30.202Z,1521492690.202 [CTD_NeilBrown](ERROR): Salinity reading out of range: -15000.080078 psu
2018-03-19T20:51:30.229Z,1521492690.229 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:30.419Z,1521492690.419 [CTD_NeilBrown](ERROR): Salinity reading out of range: -37367.683594 psu
2018-03-19T20:51:30.424Z,1521492690.424 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:30.635Z,1521492690.635 [CTD_NeilBrown](ERROR): Salinity reading out of range: -17003.638672 psu
2018-03-19T20:51:30.640Z,1521492690.640 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:30.847Z,1521492690.847 [CTD_NeilBrown](ERROR): Salinity reading out of range: 411.712189 psu
2018-03-19T20:51:30.852Z,1521492690.852 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:31.010Z,1521492691.010 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	241		224.802		79.597		20.261		30.961		30.961		39.661		8.700		433.8		633.7		88.9	



2018-03-19T20:51:31.010Z,1521492691.010 [Aanderaa_O2](DEBUG): Error parsing device response
2018-03-19T20:51:31.055Z,1521492691.055 [CTD_NeilBrown](ERROR): Salinity reading out of range: -40009.175781 psu
2018-03-19T20:51:31.060Z,1521492691.060 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:31.270Z,1521492691.270 [CTD_NeilBrown](ERROR): Salinity reading out of range: -31388.824219 psu
2018-03-19T20:51:31.289Z,1521492691.289 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:31.487Z,1521492691.487 [CTD_NeilBrown](ERROR): Salinity reading out of range: -18032.410156 psu
2018-03-19T20:51:31.492Z,1521492691.492 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:31.715Z,1521492691.715 [CTD_NeilBrown](ERROR): Salinity reading out of range: -1118853376.000000 psu
2018-03-19T20:51:31.726Z,1521492691.726 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:31.818Z,1521492691.818 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	241		225.111		79.707		20.261		30.945		30.945		39.645		8.701		433.9		633.0		88.9	

2018-03-19T20:51:31.819Z,1521492691.819 [Aanderaa_O2](DEBUG): Error parsing device response
2018-03-19T20:51:32.003Z,1521492692.003 [CTD_NeilBrown](ERROR): Salinity reading out of range: -38285.710938 psu
2018-03-19T20:51:32.011Z,1521492692.011 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:32.220Z,1521492692.220 [CTD_NeilBrown](ERROR): Salinity reading out of range: -96525.343750 psu
2018-03-19T20:51:32.228Z,1521492692.228 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:32.435Z,1521492692.435 [CTD_NeilBrown](ERROR): Salinity reading out of range: -14990.967773 psu
2018-03-19T20:51:32.440Z,1521492692.440 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:32.643Z,1521492692.643 [CTD_NeilBrown](ERROR): Salinity reading out of range: -1745.649658 psu
2018-03-19T20:51:32.648Z,1521492692.648 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:32.859Z,1521492692.859 [CTD_NeilBrown](ERROR): Salinity reading out of range: 1907.579102 psu
2018-03-19T20:51:32.866Z,1521492692.866 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:33.075Z,1521492693.075 [CTD_NeilBrown](ERROR): Salinity reading out of range: -28700.292969 psu
2018-03-19T20:51:33.080Z,1521492693.080 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:33.291Z,1521492693.291 [CTD_NeilBrown](ERROR): Salinity reading out of range: -54813.164062 psu
2018-03-19T20:51:33.296Z,1521492693.296 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:33.495Z,1521492693.495 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11747.554688 psu
2018-03-19T20:51:33.501Z,1521492693.501 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:33.796Z,1521492693.796 [CTD_NeilBrown](ERROR): Salinity reading out of range: -946.181396 psu
2018-03-19T20:51:33.808Z,1521492693.808 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:33.844Z,1521492693.844 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	241		225.261		79.762		20.263		30.936		30.936		39.631		8.694		433.6		631.9		88.9	

2018-03-19T20:51:33.844Z,1521492693.844 [Aanderaa_O2](DEBUG): Error parsing device response
2018-03-19T20:51:34.015Z,1521492694.015 [CTD_NeilBrown](ERROR): Salinity reading out of range: -35708.753906 psu
2018-03-19T20:51:34.020Z,1521492694.020 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:34.228Z,1521492694.228 [CTD_NeilBrown](ERROR): Salinity reading out of range: -12507.651367 psu
2018-03-19T20:51:34.236Z,1521492694.236 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:34.444Z,1521492694.444 [CTD_NeilBrown](ERROR): Salinity reading out of range: -32036.277344 psu
2018-03-19T20:51:34.449Z,1521492694.449 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:34.659Z,1521492694.659 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11897.625000 psu
2018-03-19T20:51:34.664Z,1521492694.664 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:34.867Z,1521492694.867 [CTD_NeilBrown](ERROR): Salinity reading out of range: -522.250000 psu
2018-03-19T20:51:34.871Z,1521492694.871 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:35.079Z,1521492695.079 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11824.800781 psu
2018-03-19T20:51:35.084Z,1521492695.084 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:35.295Z,1521492695.295 [CTD_NeilBrown](ERROR): Salinity reading out of range: -19204.755859 psu
2018-03-19T20:51:35.300Z,1521492695.300 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:35.384Z,1521492695.384 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:51:35.603Z,1521492695.603 [CTD_NeilBrown](ERROR): Salinity reading out of range: -49784.101562 psu
2018-03-19T20:51:35.609Z,1521492695.609 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:35.811Z,1521492695.811 [CTD_NeilBrown](ERROR): Salinity reading out of range: -2122.371826 psu
2018-03-19T20:51:35.816Z,1521492695.816 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:36.035Z,1521492696.035 [CTD_NeilBrown](ERROR): Salinity reading out of range: -46254.753906 psu
2018-03-19T20:51:36.040Z,1521492696.040 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:36.233Z,1521492696.233 [CTD_NeilBrown](ERROR): Salinity reading out of range: -247.099899 psu
2018-03-19T20:51:36.238Z,1521492696.238 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:36.451Z,1521492696.451 [CTD_NeilBrown](ERROR): Salinity reading out of range: -248123.468750 psu
2018-03-19T20:51:36.456Z,1521492696.456 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:36.675Z,1521492696.675 [CTD_NeilBrown](ERROR): Salinity reading out of range: -144248.078125 psu
2018-03-19T20:51:36.683Z,1521492696.683 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:36.879Z,1521492696.879 [CTD_NeilBrown](ERROR): Salinity reading out of range: -5622.554688 psu
2018-03-19T20:51:36.884Z,1521492696.884 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:37.092Z,1521492697.092 [CTD_NeilBrown](ERROR): Salinity reading out of range: -85385.875000 psu
2018-03-19T20:51:37.097Z,1521492697.097 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:37.159Z,1521492697.159 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:37.400Z,1521492697.400 [CTD_NeilBrown](ERROR): Salinity reading out of range: -40406.640625 psu
2018-03-19T20:51:37.405Z,1521492697.405 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:37.615Z,1521492697.615 [CTD_NeilBrown](ERROR): Salinity reading out of range: -13731.476562 psu
2018-03-19T20:51:37.620Z,1521492697.620 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:37.835Z,1521492697.835 [CTD_NeilBrown](ERROR): Salinity reading out of range: 493.528015 psu
2018-03-19T20:51:37.840Z,1521492697.840 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:38.047Z,1521492698.047 [CTD_NeilBrown](ERROR): Salinity reading out of range: -91486.554688 psu
2018-03-19T20:51:38.052Z,1521492698.052 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:38.255Z,1521492698.255 [CTD_NeilBrown](ERROR): Salinity reading out of range: -30040.267578 psu
2018-03-19T20:51:38.260Z,1521492698.260 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:38.483Z,1521492698.483 [CTD_NeilBrown](ERROR): Salinity reading out of range: -170234.687500 psu
2018-03-19T20:51:38.489Z,1521492698.489 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:38.696Z,1521492698.696 [CTD_NeilBrown](ERROR): Salinity reading out of range: -19921.240234 psu
2018-03-19T20:51:38.704Z,1521492698.704 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:39.003Z,1521492699.003 [CTD_NeilBrown](ERROR): Salinity reading out of range: -55387.652344 psu
2018-03-19T20:51:39.008Z,1521492699.008 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:39.216Z,1521492699.216 [CTD_NeilBrown](ERROR): Salinity reading out of range: -16947.619141 psu
2018-03-19T20:51:39.221Z,1521492699.221 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:39.435Z,1521492699.435 [CTD_NeilBrown](ERROR): Salinity reading out of range: 223.025497 psu
2018-03-19T20:51:39.445Z,1521492699.445 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:39.651Z,1521492699.651 [CTD_NeilBrown](ERROR): Salinity reading out of range: -22767.255859 psu
2018-03-19T20:51:39.656Z,1521492699.656 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:39.864Z,1521492699.864 [CTD_NeilBrown](ERROR): Salinity reading out of range: -26476.841797 psu
2018-03-19T20:51:39.869Z,1521492699.869 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:40.075Z,1521492700.075 [CTD_NeilBrown](ERROR): Salinity reading out of range: -16526.353516 psu
2018-03-19T20:51:40.080Z,1521492700.080 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:40.283Z,1521492700.283 [CTD_NeilBrown](ERROR): Salinity reading out of range: -12169.495117 psu
2018-03-19T20:51:40.287Z,1521492700.287 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:40.499Z,1521492700.499 [CTD_NeilBrown](ERROR): Salinity reading out of range: -26506.458984 psu
2018-03-19T20:51:40.504Z,1521492700.504 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:40.803Z,1521492700.803 [CTD_NeilBrown](ERROR): Salinity reading out of range: -4849.185547 psu
2018-03-19T20:51:40.814Z,1521492700.814 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:41.015Z,1521492701.015 [CTD_NeilBrown](ERROR): Salinity reading out of range: -12758.253906 psu
2018-03-19T20:51:41.019Z,1521492701.019 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:41.227Z,1521492701.227 [CTD_NeilBrown](ERROR): Salinity reading out of range: -18824.521484 psu
2018-03-19T20:51:41.238Z,1521492701.238 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:41.447Z,1521492701.447 [CTD_NeilBrown](ERROR): Salinity reading out of range: -15496.031250 psu
2018-03-19T20:51:41.452Z,1521492701.452 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:41.659Z,1521492701.659 [CTD_NeilBrown](ERROR): Salinity reading out of range: -14712.516602 psu
2018-03-19T20:51:41.675Z,1521492701.675 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:41.876Z,1521492701.876 [CTD_NeilBrown](ERROR): Salinity reading out of range: -166483.578125 psu
2018-03-19T20:51:41.882Z,1521492701.882 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:42.083Z,1521492702.083 [CTD_NeilBrown](ERROR): Salinity reading out of range: -19534.292969 psu
2018-03-19T20:51:42.088Z,1521492702.088 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:42.299Z,1521492702.299 [CTD_NeilBrown](ERROR): Salinity reading out of range: -1869.916626 psu
2018-03-19T20:51:42.303Z,1521492702.303 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:42.599Z,1521492702.599 [CTD_NeilBrown](ERROR): Salinity reading out of range: -51346.031250 psu
2018-03-19T20:51:42.604Z,1521492702.604 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:42.823Z,1521492702.823 [CTD_NeilBrown](ERROR): Salinity reading out of range: -39442.035156 psu
2018-03-19T20:51:42.828Z,1521492702.828 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:43.028Z,1521492703.028 [CTD_NeilBrown](ERROR): Salinity reading out of range: 3993.965820 psu
2018-03-19T20:51:43.033Z,1521492703.033 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:43.094Z,1521492703.094 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:43.253Z,1521492703.253 [CTD_NeilBrown](ERROR): Salinity reading out of range: -88998.445312 psu
2018-03-19T20:51:43.288Z,1521492703.288 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:43.459Z,1521492703.459 [CTD_NeilBrown](ERROR): Salinity reading out of range: -255.160294 psu
2018-03-19T20:51:43.463Z,1521492703.463 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:43.674Z,1521492703.674 [CTD_NeilBrown](ERROR): Salinity reading out of range: -44731.718750 psu
2018-03-19T20:51:43.708Z,1521492703.708 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011526 psu
2018-03-19T20:51:43.711Z,1521492703.711 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:43.722Z,1521492703.722 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:43.884Z,1521492703.884 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7850.161133 psu
2018-03-19T20:51:43.889Z,1521492703.889 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:44.099Z,1521492704.099 [CTD_NeilBrown](ERROR): Salinity reading out of range: -19445.808594 psu
2018-03-19T20:51:44.104Z,1521492704.104 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:44.400Z,1521492704.400 [CTD_NeilBrown](ERROR): Salinity reading out of range: -22641.509766 psu
2018-03-19T20:51:44.405Z,1521492704.405 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:44.616Z,1521492704.616 [CTD_NeilBrown](ERROR): Salinity reading out of range: 2629.793213 psu
2018-03-19T20:51:44.621Z,1521492704.621 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:44.827Z,1521492704.827 [CTD_NeilBrown](ERROR): Salinity reading out of range: -720.995728 psu
2018-03-19T20:51:44.832Z,1521492704.832 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:45.040Z,1521492705.040 [CTD_NeilBrown](ERROR): Salinity reading out of range: 1617.637939 psu
2018-03-19T20:51:45.045Z,1521492705.045 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:45.107Z,1521492705.107 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:45.258Z,1521492705.258 [CTD_NeilBrown](ERROR): Salinity reading out of range: -17467.492188 psu
2018-03-19T20:51:45.275Z,1521492705.275 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011531 psu
2018-03-19T20:51:45.280Z,1521492705.280 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:45.286Z,1521492705.286 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:45.471Z,1521492705.471 [CTD_NeilBrown](ERROR): Salinity reading out of range: -9712.671875 psu
2018-03-19T20:51:45.475Z,1521492705.475 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:45.688Z,1521492705.688 [CTD_NeilBrown](ERROR): Salinity reading out of range: -8236.982422 psu
2018-03-19T20:51:45.704Z,1521492705.704 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:45.895Z,1521492705.895 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11872.291016 psu
2018-03-19T20:51:45.899Z,1521492705.899 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:46.075Z,1521492706.075 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011536 psu
2018-03-19T20:51:46.076Z,1521492706.076 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:46.200Z,1521492706.200 [CTD_NeilBrown](ERROR): Salinity reading out of range: -5878.470703 psu
2018-03-19T20:51:46.229Z,1521492706.229 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:46.411Z,1521492706.411 [CTD_NeilBrown](ERROR): Salinity reading out of range: -8506.628906 psu
2018-03-19T20:51:46.416Z,1521492706.416 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:46.631Z,1521492706.631 [CTD_NeilBrown](ERROR): Salinity reading out of range: -9250.350586 psu
2018-03-19T20:51:46.636Z,1521492706.636 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:46.733Z,1521492706.733 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011539 psu
2018-03-19T20:51:46.737Z,1521492706.737 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:46.847Z,1521492706.847 [CTD_NeilBrown](ERROR): Salinity reading out of range: 89748.812500 psu
2018-03-19T20:51:46.851Z,1521492706.851 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:46.986Z,1521492706.986 [NAL9602](INFO): SBD MO Status=0, MOMSN=4860, MT Status=0, MTMSN=0
2018-03-19T20:51:46.986Z,1521492706.986 [NAL9602](INFO): No messages in MT queue
2018-03-19T20:51:47.059Z,1521492707.059 [CTD_NeilBrown](ERROR): Salinity reading out of range: -940.451416 psu
2018-03-19T20:51:47.063Z,1521492707.063 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:47.275Z,1521492707.275 [CTD_NeilBrown](ERROR): Salinity reading out of range: -8306.506836 psu
2018-03-19T20:51:47.280Z,1521492707.280 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:47.487Z,1521492707.487 [CTD_NeilBrown](ERROR): Salinity reading out of range: -26865.259766 psu
2018-03-19T20:51:47.492Z,1521492707.492 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:47.692Z,1521492707.692 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7841.858398 psu
2018-03-19T20:51:47.705Z,1521492707.705 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:47.784Z,1521492707.784 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:47.936Z,1521492707.936 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011787 psu
2018-03-19T20:51:47.937Z,1521492707.937 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:47.000Z,1521492708.000 [CTD_NeilBrown](ERROR): Salinity reading out of range: -15139.184570 psu
2018-03-19T20:51:48.007Z,1521492708.007 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:48.072Z,1521492708.072 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:48.216Z,1521492708.216 [CTD_NeilBrown](ERROR): Salinity reading out of range: -31868.757812 psu
2018-03-19T20:51:48.221Z,1521492708.221 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:48.439Z,1521492708.439 [CTD_NeilBrown](ERROR): Salinity reading out of range: -21496.400391 psu
2018-03-19T20:51:48.445Z,1521492708.445 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:48.647Z,1521492708.647 [CTD_NeilBrown](ERROR): Salinity reading out of range: -204.767899 psu
2018-03-19T20:51:48.652Z,1521492708.652 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:48.717Z,1521492708.717 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011543 psu
2018-03-19T20:51:48.722Z,1521492708.722 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:48.855Z,1521492708.855 [CTD_NeilBrown](ERROR): Salinity reading out of range: 3880.695801 psu
2018-03-19T20:51:48.862Z,1521492708.862 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:49.075Z,1521492709.075 [CTD_NeilBrown](ERROR): Salinity reading out of range: -40143.335938 psu
2018-03-19T20:51:49.079Z,1521492709.079 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:49.287Z,1521492709.287 [CTD_NeilBrown](ERROR): Salinity reading out of range: -68573.375000 psu
2018-03-19T20:51:49.292Z,1521492709.292 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:49.507Z,1521492709.507 [CTD_NeilBrown](ERROR): Salinity reading out of range: -65538.953125 psu
2018-03-19T20:51:49.511Z,1521492709.511 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:49.804Z,1521492709.804 [CTD_NeilBrown](ERROR): Salinity reading out of range: -282.684113 psu
2018-03-19T20:51:49.814Z,1521492709.814 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:49.920Z,1521492709.920 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011543 psu
2018-03-19T20:51:49.921Z,1521492709.921 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:50.017Z,1521492710.017 [CTD_NeilBrown](ERROR): Salinity reading out of range: -35990.304688 psu
2018-03-19T20:51:50.024Z,1521492710.024 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:50.227Z,1521492710.227 [CTD_NeilBrown](ERROR): Salinity reading out of range: -17193.109375 psu
2018-03-19T20:51:50.232Z,1521492710.232 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:50.439Z,1521492710.439 [CTD_NeilBrown](ERROR): Salinity reading out of range: -15376.969727 psu
2018-03-19T20:51:50.444Z,1521492710.444 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:50.655Z,1521492710.655 [CTD_NeilBrown](ERROR): Salinity reading out of range: -12245.372070 psu
2018-03-19T20:51:50.660Z,1521492710.660 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:50.872Z,1521492710.872 [CTD_NeilBrown](ERROR): Salinity reading out of range: 13234.469727 psu
2018-03-19T20:51:50.876Z,1521492710.876 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:50.938Z,1521492710.938 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:51.088Z,1521492711.088 [CTD_NeilBrown](ERROR): Salinity reading out of range: -13406.860352 psu
2018-03-19T20:51:51.095Z,1521492711.095 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:51.120Z,1521492711.120 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011542 psu
2018-03-19T20:51:51.122Z,1521492711.122 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:51.401Z,1521492711.401 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11975.175781 psu
2018-03-19T20:51:51.410Z,1521492711.410 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:51.624Z,1521492711.624 [CTD_NeilBrown](ERROR): Salinity reading out of range: -22046.642578 psu
2018-03-19T20:51:51.629Z,1521492711.629 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:51.694Z,1521492711.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011544 psu
2018-03-19T20:51:51.696Z,1521492711.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:51.843Z,1521492711.843 [CTD_NeilBrown](ERROR): Salinity reading out of range: -14637.162109 psu
2018-03-19T20:51:51.848Z,1521492711.848 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:52.047Z,1521492712.047 [CTD_NeilBrown](ERROR): Salinity reading out of range: -14436.346680 psu
2018-03-19T20:51:52.054Z,1521492712.054 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:52.255Z,1521492712.255 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7012.413574 psu
2018-03-19T20:51:52.260Z,1521492712.260 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:52.479Z,1521492712.479 [CTD_NeilBrown](ERROR): Salinity reading out of range: -10411.876953 psu
2018-03-19T20:51:52.485Z,1521492712.485 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:52.684Z,1521492712.684 [CTD_NeilBrown](ERROR): Salinity reading out of range: -99677.648438 psu
2018-03-19T20:51:52.699Z,1521492712.699 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:52.897Z,1521492712.897 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011548 psu
2018-03-19T20:51:52.900Z,1521492712.900 [CTD_NeilBrown](ERROR): Salinity reading out of range: 5748.604004 psu
2018-03-19T20:51:52.904Z,1521492712.904 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:52.905Z,1521492712.905 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:52.970Z,1521492712.970 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:53.208Z,1521492713.208 [CTD_NeilBrown](ERROR): Salinity reading out of range: 1484.818848 psu
2018-03-19T20:51:53.213Z,1521492713.213 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:53.421Z,1521492713.421 [CTD_NeilBrown](ERROR): Salinity reading out of range: -6798.978027 psu
2018-03-19T20:51:53.440Z,1521492713.440 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:53.635Z,1521492713.635 [CTD_NeilBrown](ERROR): Salinity reading out of range: -36482.289062 psu
2018-03-19T20:51:53.640Z,1521492713.640 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:53.694Z,1521492713.694 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011552 psu
2018-03-19T20:51:53.697Z,1521492713.697 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:53.855Z,1521492713.855 [CTD_NeilBrown](ERROR): Salinity reading out of range: -18845.314453 psu
2018-03-19T20:51:53.860Z,1521492713.860 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:54.067Z,1521492714.067 [CTD_NeilBrown](ERROR): Salinity reading out of range: -28145.285156 psu
2018-03-19T20:51:54.075Z,1521492714.075 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:54.275Z,1521492714.275 [CTD_NeilBrown](ERROR): Salinity reading out of range: 4377.103027 psu
2018-03-19T20:51:54.280Z,1521492714.280 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:54.491Z,1521492714.491 [CTD_NeilBrown](ERROR): Salinity reading out of range: -9370.643555 psu
2018-03-19T20:51:54.496Z,1521492714.496 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:54.803Z,1521492714.803 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7694.117676 psu
2018-03-19T20:51:54.808Z,1521492714.808 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:55.012Z,1521492715.012 [CTD_NeilBrown](ERROR): Salinity reading out of range: -24857.767578 psu
2018-03-19T20:51:55.017Z,1521492715.017 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:55.053Z,1521492715.053 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011556 psu
2018-03-19T20:51:55.055Z,1521492715.055 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:55.079Z,1521492715.079 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:55.223Z,1521492715.223 [CTD_NeilBrown](ERROR): Salinity reading out of range: -336.045410 psu
2018-03-19T20:51:55.226Z,1521492715.226 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:55.439Z,1521492715.439 [CTD_NeilBrown](ERROR): Salinity reading out of range: -875.859375 psu
2018-03-19T20:51:55.443Z,1521492715.443 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:55.651Z,1521492715.651 [CTD_NeilBrown](ERROR): Salinity reading out of range: -10659.888672 psu
2018-03-19T20:51:55.656Z,1521492715.656 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:55.718Z,1521492715.718 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011559 psu
2018-03-19T20:51:55.720Z,1521492715.720 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:55.863Z,1521492715.863 [CTD_NeilBrown](ERROR): Salinity reading out of range: -20180.853516 psu
2018-03-19T20:51:55.867Z,1521492715.867 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:56.075Z,1521492716.075 [CTD_NeilBrown](ERROR): Salinity reading out of range: -33105.515625 psu
2018-03-19T20:51:56.081Z,1521492716.081 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:56.291Z,1521492716.291 [CTD_NeilBrown](ERROR): Salinity reading out of range: 256.581207 psu
2018-03-19T20:51:56.295Z,1521492716.295 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:56.600Z,1521492716.600 [CTD_NeilBrown](ERROR): Salinity reading out of range: -70208.781250 psu
2018-03-19T20:51:56.612Z,1521492716.612 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:56.695Z,1521492716.695 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:56.815Z,1521492716.815 [CTD_NeilBrown](ERROR): Salinity reading out of range: -1314.513428 psu
2018-03-19T20:51:56.819Z,1521492716.819 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:57.027Z,1521492717.027 [CTD_NeilBrown](ERROR): Salinity reading out of range: 499.015900 psu
2018-03-19T20:51:57.032Z,1521492717.032 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:57.241Z,1521492717.241 [CTD_NeilBrown](ERROR): Salinity reading out of range: -689.358215 psu
2018-03-19T20:51:57.270Z,1521492717.270 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:57.287Z,1521492717.287 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011561 psu
2018-03-19T20:51:57.288Z,1521492717.288 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:57.459Z,1521492717.459 [CTD_NeilBrown](ERROR): Salinity reading out of range: -45495.625000 psu
2018-03-19T20:51:57.464Z,1521492717.464 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:57.672Z,1521492717.672 [CTD_NeilBrown](ERROR): Salinity reading out of range: -21685.410156 psu
2018-03-19T20:51:57.685Z,1521492717.685 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:57.883Z,1521492717.883 [CTD_NeilBrown](ERROR): Salinity reading out of range: 185245.890625 psu
2018-03-19T20:51:57.887Z,1521492717.887 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:58.083Z,1521492718.083 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011565 psu
2018-03-19T20:51:58.085Z,1521492718.085 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:58.111Z,1521492718.111 [CTD_NeilBrown](ERROR): Salinity reading out of range: -53616.320312 psu
2018-03-19T20:51:58.116Z,1521492718.116 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:58.399Z,1521492718.399 [CTD_NeilBrown](ERROR): Salinity reading out of range: -52526.421875 psu
2018-03-19T20:51:58.405Z,1521492718.405 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:58.474Z,1521492718.474 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:51:58.627Z,1521492718.627 [CTD_NeilBrown](ERROR): Salinity reading out of range: -413675.906250 psu
2018-03-19T20:51:58.632Z,1521492718.632 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:58.693Z,1521492718.693 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011570 psu
2018-03-19T20:51:58.696Z,1521492718.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:51:58.839Z,1521492718.839 [CTD_NeilBrown](ERROR): Salinity reading out of range: -30541.505859 psu
2018-03-19T20:51:58.844Z,1521492718.844 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:59.051Z,1521492719.051 [CTD_NeilBrown](ERROR): Salinity reading out of range: -83215.296875 psu
2018-03-19T20:51:59.061Z,1521492719.061 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:59.269Z,1521492719.269 [CTD_NeilBrown](ERROR): Salinity reading out of range: -40439.843750 psu
2018-03-19T20:51:59.320Z,1521492719.320 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:59.475Z,1521492719.475 [CTD_NeilBrown](ERROR): Salinity reading out of range: -68823.390625 psu
2018-03-19T20:51:59.480Z,1521492719.480 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:59.692Z,1521492719.692 [CTD_NeilBrown](ERROR): Salinity reading out of range: -34634.800781 psu
2018-03-19T20:51:59.698Z,1521492719.698 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:51:59.712Z,1521492719.712 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011570 psu
2018-03-19T20:51:59.713Z,1521492719.713 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:00.007Z,1521492720.007 [CTD_NeilBrown](ERROR): Salinity reading out of range: -8119.875977 psu
2018-03-19T20:52:00.012Z,1521492720.012 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:00.221Z,1521492720.221 [CTD_NeilBrown](ERROR): Salinity reading out of range: -12433.632812 psu
2018-03-19T20:52:00.262Z,1521492720.262 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:00.427Z,1521492720.427 [CTD_NeilBrown](ERROR): Salinity reading out of range: -9284.862305 psu
2018-03-19T20:52:00.442Z,1521492720.442 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:00.643Z,1521492720.643 [CTD_NeilBrown](ERROR): Salinity reading out of range: -6699.539551 psu
2018-03-19T20:52:00.648Z,1521492720.648 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:00.863Z,1521492720.863 [CTD_NeilBrown](ERROR): Salinity reading out of range: 2333.988037 psu
2018-03-19T20:52:00.867Z,1521492720.867 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:00.912Z,1521492720.912 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011575 psu
2018-03-19T20:52:00.913Z,1521492720.913 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:01.079Z,1521492721.079 [CTD_NeilBrown](ERROR): Salinity reading out of range: -163662.531250 psu
2018-03-19T20:52:01.083Z,1521492721.083 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:01.291Z,1521492721.291 [CTD_NeilBrown](ERROR): Salinity reading out of range: 1120.816772 psu
2018-03-19T20:52:01.306Z,1521492721.306 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:01.604Z,1521492721.604 [CTD_NeilBrown](ERROR): Salinity reading out of range: -20751.853516 psu
2018-03-19T20:52:01.609Z,1521492721.609 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:01.693Z,1521492721.693 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011580 psu
2018-03-19T20:52:01.694Z,1521492721.694 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:01.819Z,1521492721.819 [CTD_NeilBrown](ERROR): Salinity reading out of range: -1230338.875000 psu
2018-03-19T20:52:01.824Z,1521492721.824 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:02.043Z,1521492722.043 [CTD_NeilBrown](ERROR): Salinity reading out of range: -12992.917969 psu
2018-03-19T20:52:02.048Z,1521492722.048 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:02.248Z,1521492722.248 [CTD_NeilBrown](ERROR): Salinity reading out of range: -17326.843750 psu
2018-03-19T20:52:02.254Z,1521492722.254 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:02.459Z,1521492722.459 [CTD_NeilBrown](ERROR): Salinity reading out of range: -4422.517578 psu
2018-03-19T20:52:02.464Z,1521492722.464 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:02.685Z,1521492722.685 [CTD_NeilBrown](ERROR): Salinity reading out of range: -18212.248047 psu
2018-03-19T20:52:02.748Z,1521492722.748 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:02.895Z,1521492722.895 [CTD_NeilBrown](ERROR): Salinity reading out of range: -20011.105469 psu
2018-03-19T20:52:02.902Z,1521492722.902 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:02.904Z,1521492722.904 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011582 psu
2018-03-19T20:52:02.905Z,1521492722.905 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:02.993Z,1521492722.993 [NAL9602](INFO): GPS fix at 20180319T205202: (36.802074, -121.786811)
2018-03-19T20:52:03.034Z,1521492723.034 [UniversalFixResidualReporter](INFO): Fix residual: 98.7 %DT, over the last 1299.4 m. Residual distance 1282.5 m at bearing 136.5 degrees. Fix at (36.8021, -121.7868) with 23.1 m made good.
2018-03-19T20:52:03.068Z,1521492723.068 [sci2:NeedComms:C] Stopped
2018-03-19T20:52:03.068Z,1521492723.068 [sci2:NeedComms:D] Running Loop=1
2018-03-19T20:52:03.211Z,1521492723.211 [CTD_NeilBrown](ERROR): Salinity reading out of range: -267833.468750 psu
2018-03-19T20:52:03.216Z,1521492723.216 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:03.423Z,1521492723.423 [CTD_NeilBrown](ERROR): Salinity reading out of range: 571.150330 psu
2018-03-19T20:52:03.432Z,1521492723.432 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:03.493Z,1521492723.493 [sci2:NeedComms:D](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-03-19T20:52:03.631Z,1521492723.631 [CTD_NeilBrown](ERROR): Salinity reading out of range: -21084.818359 psu
2018-03-19T20:52:03.636Z,1521492723.636 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:03.855Z,1521492723.855 [CTD_NeilBrown](ERROR): Salinity reading out of range: -37617.554688 psu
2018-03-19T20:52:03.859Z,1521492723.859 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:04.067Z,1521492724.067 [CTD_NeilBrown](ERROR): Salinity reading out of range: -20612.500000 psu
2018-03-19T20:52:04.072Z,1521492724.072 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:04.283Z,1521492724.283 [CTD_NeilBrown](ERROR): Salinity reading out of range: 901.243103 psu
2018-03-19T20:52:04.290Z,1521492724.290 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:04.491Z,1521492724.491 [CTD_NeilBrown](ERROR): Salinity reading out of range: -71918.773438 psu
2018-03-19T20:52:04.495Z,1521492724.495 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011584 psu
2018-03-19T20:52:04.496Z,1521492724.496 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:04.499Z,1521492724.499 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:04.811Z,1521492724.811 [CTD_NeilBrown](ERROR): Salinity reading out of range: -10134.997070 psu
2018-03-19T20:52:04.815Z,1521492724.815 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:04.900Z,1521492724.900 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011588 psu
2018-03-19T20:52:04.901Z,1521492724.901 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:05.019Z,1521492725.019 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7439.112305 psu
2018-03-19T20:52:05.023Z,1521492725.023 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:05.247Z,1521492725.247 [CTD_NeilBrown](ERROR): Salinity reading out of range: -25162.591797 psu
2018-03-19T20:52:05.252Z,1521492725.252 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:05.440Z,1521492725.440 [CTD_NeilBrown](ERROR): Salinity reading out of range: -554.048218 psu
2018-03-19T20:52:05.444Z,1521492725.444 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:05.664Z,1521492725.664 [CTD_NeilBrown](ERROR): Salinity reading out of range: 461404.437500 psu
2018-03-19T20:52:05.695Z,1521492725.695 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011592 psu
2018-03-19T20:52:05.696Z,1521492725.696 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:05.703Z,1521492725.703 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:05.880Z,1521492725.880 [CTD_NeilBrown](ERROR): Salinity reading out of range: 247195.484375 psu
2018-03-19T20:52:05.885Z,1521492725.885 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:06.103Z,1521492726.103 [CTD_NeilBrown](ERROR): Salinity reading out of range: -211180.359375 psu
2018-03-19T20:52:06.109Z,1521492726.109 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:06.411Z,1521492726.411 [CTD_NeilBrown](ERROR): Salinity reading out of range: -8851.864258 psu
2018-03-19T20:52:06.415Z,1521492726.415 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:06.635Z,1521492726.635 [CTD_NeilBrown](ERROR): Salinity reading out of range: 255486432.000000 psu
2018-03-19T20:52:06.640Z,1521492726.640 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:06.840Z,1521492726.840 [CTD_NeilBrown](ERROR): Salinity reading out of range: -99531.101562 psu
2018-03-19T20:52:06.845Z,1521492726.845 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:06.896Z,1521492726.896 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011594 psu
2018-03-19T20:52:06.898Z,1521492726.898 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:07.067Z,1521492727.067 [CTD_NeilBrown](ERROR): Salinity reading out of range: 43655.242188 psu
2018-03-19T20:52:07.072Z,1521492727.072 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:07.276Z,1521492727.276 [CTD_NeilBrown](ERROR): Salinity reading out of range: 58549.617188 psu
2018-03-19T20:52:07.280Z,1521492727.280 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:07.347Z,1521492727.347 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:52:07.503Z,1521492727.503 [CTD_NeilBrown](ERROR): Salinity reading out of range: 48029.132812 psu
2018-03-19T20:52:07.510Z,1521492727.510 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:07.807Z,1521492727.807 [CTD_NeilBrown](ERROR): Salinity reading out of range: 5626.682129 psu
2018-03-19T20:52:07.812Z,1521492727.812 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:08.019Z,1521492728.019 [CTD_NeilBrown](ERROR): Salinity reading out of range: -30918.226562 psu
2018-03-19T20:52:08.024Z,1521492728.024 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:08.243Z,1521492728.243 [CTD_NeilBrown](ERROR): Salinity reading out of range: 141.702606 psu
2018-03-19T20:52:08.246Z,1521492728.246 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:08.456Z,1521492728.456 [CTD_NeilBrown](ERROR): Salinity reading out of range: 2047356.500000 psu
2018-03-19T20:52:08.460Z,1521492728.460 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:08.487Z,1521492728.487 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011597 psu
2018-03-19T20:52:08.488Z,1521492728.488 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:08.672Z,1521492728.672 [CTD_NeilBrown](ERROR): Salinity reading out of range: -46468.539062 psu
2018-03-19T20:52:08.681Z,1521492728.681 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:08.895Z,1521492728.895 [CTD_NeilBrown](ERROR): Salinity reading out of range: -135485.281250 psu
2018-03-19T20:52:08.899Z,1521492728.899 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:08.996Z,1521492728.996 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011601 psu
2018-03-19T20:52:08.997Z,1521492728.997 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:09.095Z,1521492729.095 [CTD_NeilBrown](ERROR): Salinity reading out of range: -443.221710 psu
2018-03-19T20:52:09.101Z,1521492729.101 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:09.411Z,1521492729.411 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11309.214844 psu
2018-03-19T20:52:09.418Z,1521492729.418 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:09.619Z,1521492729.619 [CTD_NeilBrown](ERROR): Salinity reading out of range: -12136.607422 psu
2018-03-19T20:52:09.623Z,1521492729.623 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:09.692Z,1521492729.692 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011605 psu
2018-03-19T20:52:09.693Z,1521492729.693 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:09.730Z,1521492729.730 [DataOverHttps](INFO): Sending 73 bytes from file Logs/20180319T193343/Courier0048.lzma
2018-03-19T20:52:09.831Z,1521492729.831 [CTD_NeilBrown](ERROR): Salinity reading out of range: 374.650513 psu
2018-03-19T20:52:09.836Z,1521492729.836 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:10.043Z,1521492730.043 [CTD_NeilBrown](ERROR): Salinity reading out of range: -13704.322266 psu
2018-03-19T20:52:10.048Z,1521492730.048 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:10.130Z,1521492730.130 [CTD_NeilBrown](DEBUG): serial timeout
2018-03-19T20:52:10.259Z,1521492730.259 [CTD_NeilBrown](ERROR): Salinity reading out of range: -1048.325073 psu
2018-03-19T20:52:10.263Z,1521492730.263 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:10.471Z,1521492730.471 [CTD_NeilBrown](ERROR): Salinity reading out of range: -6268.069824 psu
2018-03-19T20:52:10.477Z,1521492730.477 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:10.512Z,1521492730.512 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0048.lzma.bak
2018-03-19T20:52:10.512Z,1521492730.512 [DataOverHttps](IMPORTANT): SBD MOMSN=8138493, MTMSN=20180319T205210
2018-03-19T20:52:10.688Z,1521492730.688 [CTD_NeilBrown](ERROR): Salinity reading out of range: -15792.417969 psu
2018-03-19T20:52:10.693Z,1521492730.693 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:10.899Z,1521492730.899 [CTD_NeilBrown](ERROR): Salinity reading out of range: -43229.519531 psu
2018-03-19T20:52:10.931Z,1521492730.931 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:11.203Z,1521492731.203 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7014.117676 psu
2018-03-19T20:52:11.208Z,1521492731.208 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:11.283Z,1521492731.283 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011608 psu
2018-03-19T20:52:11.284Z,1521492731.284 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:11.420Z,1521492731.420 [CTD_NeilBrown](ERROR): Salinity reading out of range: -5743.108887 psu
2018-03-19T20:52:11.425Z,1521492731.425 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:11.631Z,1521492731.631 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7242.482910 psu
2018-03-19T20:52:11.636Z,1521492731.636 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:11.693Z,1521492731.693 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011608 psu
2018-03-19T20:52:11.694Z,1521492731.694 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:11.847Z,1521492731.847 [CTD_NeilBrown](ERROR): Salinity reading out of range: -4608.175781 psu
2018-03-19T20:52:11.851Z,1521492731.851 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:12.059Z,1521492732.059 [CTD_NeilBrown](ERROR): Salinity reading out of range: -5023.908203 psu
2018-03-19T20:52:12.063Z,1521492732.063 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:12.263Z,1521492732.263 [CTD_NeilBrown](ERROR): Salinity reading out of range: -1261.312012 psu
2018-03-19T20:52:12.267Z,1521492732.267 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:12.480Z,1521492732.480 [CTD_NeilBrown](ERROR): Salinity reading out of range: -16425.302734 psu
2018-03-19T20:52:12.487Z,1521492732.487 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:12.696Z,1521492732.696 [CTD_NeilBrown](ERROR): Salinity reading out of range: -14922.596680 psu
2018-03-19T20:52:12.701Z,1521492732.701 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:13.007Z,1521492733.007 [CTD_NeilBrown](ERROR): Salinity reading out of range: -5560.686523 psu
2018-03-19T20:52:13.010Z,1521492733.010 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:13.215Z,1521492733.215 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11080.896484 psu
2018-03-19T20:52:13.274Z,1521492733.274 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:13.287Z,1521492733.287 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011597 psu
2018-03-19T20:52:13.288Z,1521492733.288 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:13.448Z,1521492733.448 [CTD_NeilBrown](ERROR): Salinity reading out of range: 1522771.000000 psu
2018-03-19T20:52:13.453Z,1521492733.453 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:13.648Z,1521492733.648 [CTD_NeilBrown](ERROR): Salinity reading out of range: -2502.205322 psu
2018-03-19T20:52:13.656Z,1521492733.656 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:13.693Z,1521492733.693 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011592 psu
2018-03-19T20:52:13.694Z,1521492733.694 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:13.867Z,1521492733.867 [CTD_NeilBrown](ERROR): Salinity reading out of range: -127586.968750 psu
2018-03-19T20:52:13.872Z,1521492733.872 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:14.079Z,1521492734.079 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7587.082520 psu
2018-03-19T20:52:14.084Z,1521492734.084 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:14.295Z,1521492734.295 [CTD_NeilBrown](ERROR): Salinity reading out of range: -4936.612305 psu
2018-03-19T20:52:14.298Z,1521492734.298 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:14.603Z,1521492734.603 [CTD_NeilBrown](ERROR): Salinity reading out of range: -4343.586426 psu
2018-03-19T20:52:14.607Z,1521492734.607 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:14.831Z,1521492734.831 [CTD_NeilBrown](ERROR): Salinity reading out of range: 181773.796875 psu
2018-03-19T20:52:14.836Z,1521492734.836 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:14.892Z,1521492734.892 [CTD_Seabird](ERROR): Salinity reading out of range: 0.011594 psu
2018-03-19T20:52:14.893Z,1521492734.894 [CTD_Seabird](INFO): some bad data, not updating bins
2018-03-19T20:52:15.035Z,1521492735.035 [CTD_NeilBrown](ERROR): Salinity reading out of range: -5107.221680 psu
2018-03-19T20:52:15.040Z,1521492735.040 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:15.251Z,1521492735.251 [CTD_NeilBrown](ERROR): Salinity reading out of range: 3583.468506 psu
2018-03-19T20:52:15.254Z,1521492735.254 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:15.466Z,1521492735.466 [CTD_NeilBrown](ERROR): Salinity reading out of range: -7586.770996 psu
2018-03-19T20:52:15.471Z,1521492735.471 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:15.672Z,1521492735.672 [CTD_NeilBrown](ERROR): Salinity reading out of range: -423.089600 psu
2018-03-19T20:52:15.684Z,1521492735.684 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:15.849Z,1521492735.849 [DataOverHttps](INFO): Received command:stop
2018-03-19T20:52:15.873Z,1521492735.873 [CommandLine](IMPORTANT): got command stop
2018-03-19T20:52:15.873Z,1521492735.873 [CommandLine](IMPORTANT): Scheduling is paused
2018-03-19T20:52:15.873Z,1521492735.873 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop
2018-03-19T20:52:15.891Z,1521492735.891 [CTD_NeilBrown](ERROR): Salinity reading out of range: -4586.945801 psu
2018-03-19T20:52:15.895Z,1521492735.895 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:15.976Z,1521492735.976 [MissionManager](INFO): MissionManager is completed.
2018-03-19T20:52:15.976Z,1521492735.976 [MissionManager](INFO): Uninitializing Mission sci2
2018-03-19T20:52:15.976Z,1521492735.976 [sci2] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2](DEBUG): Aggregate::uninitialize sci2
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science](DEBUG): Aggregate::uninitialize sci2:Science
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:A] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:C] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:D] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:G] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:Read_Oil] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:PeakDetectChl] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:PeakDetectChl](DEBUG): Aggregate::uninitialize sci2:Science:PeakDetectChl
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:PeakDetectChl:A.PeakDetectVsDepth] Stopped
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2018-03-19T20:52:15.977Z,1521492735.977 [sci2:NeedComms] Stopped
2018-03-19T20:52:15.978Z,1521492735.978 [sci2:NeedComms](DEBUG): Aggregate::uninitialize sci2:NeedComms
2018-03-19T20:52:15.978Z,1521492735.978 [sci2:NeedComms:B.GoToSurface] Stopped
2018-03-19T20:52:15.978Z,1521492735.978 [sci2:NeedComms:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-03-19T20:52:15.978Z,1521492735.978 [sci2:NeedComms:D] Stopped
2018-03-19T20:52:15.978Z,1521492735.978 [sci2:StandardEnvelopes] Stopped
2018-03-19T20:52:15.978Z,1521492735.978 [sci2:StandardEnvelopes](DEBUG): Aggregate::uninitialize sci2:StandardEnvelopes
2018-03-19T20:52:15.978Z,1521492735.978 [sci2:StandardEnvelopes:A.AltitudeEnvelope] Stopped
2018-03-19T20:52:15.978Z,1521492735.978 [sci2:StandardEnvelopes:A.AltitudeEnvelope](DEBUG): Uninitialize AltitudeEnvelopeComponent.
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:StandardEnvelopes:B.DepthEnvelope] Stopped
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:StandardEnvelopes:B.DepthEnvelope](DEBUG): Uninitialize.
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:StandardEnvelopes:C.OffshoreEnvelope] Stopped
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:StandardEnvelopes:C.OffshoreEnvelope](DEBUG): Uninitialize OffshoreEnvelopeComponent.
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:StartingMission] Stopped
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:StartingMission](DEBUG): Aggregate::uninitialize sci2:StartingMission
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:I.Pitch] Stopped
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:J.Buoyancy] Stopped
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:J.Buoyancy](DEBUG): Uninitialize Buoyancy Component.
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:K.SetSpeed] Stopped
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:K.SetSpeed](DEBUG): Uninitialize.
2018-03-19T20:52:15.983Z,1521492735.983 [sci2:L.DepthEnvelope] Stopped
2018-03-19T20:52:15.984Z,1521492735.984 [sci2:L.DepthEnvelope](DEBUG): Uninitialize.
2018-03-19T20:52:15.984Z,1521492735.984 [sci2:M.AltitudeEnvelope] Stopped
2018-03-19T20:52:15.984Z,1521492735.984 [sci2:M.AltitudeEnvelope](DEBUG): Uninitialize AltitudeEnvelopeComponent.
2018-03-19T20:52:15.984Z,1521492735.984 [sci2:N.YoYo] Stopped
2018-03-19T20:52:15.984Z,1521492735.984 [sci2:N.YoYo](DEBUG): Uninitialize YoYoComponent.
2018-03-19T20:52:16.108Z,1521492736.108 [CTD_NeilBrown](ERROR): Salinity reading out of range: -11281.169922 psu
2018-03-19T20:52:16.121Z,1521492736.121 [CTD_NeilBrown](INFO): some bad data, not updating bins
2018-03-19T20:52:16.312Z,1521492736.312 [MissionManager](IMPORTANT): Started mission Default
2018-03-19T20:52:16.313Z,1521492736.313 [Default] Running Loop=1
2018-03-19T20:52:16.313Z,1521492736.313 [Default](DEBUG): Aggregate::initialize Default
2018-03-19T20:52:16.313Z,1521492736.313 [Default:B.GoToSurface] Running Loop=1
2018-03-19T20:52:16.313Z,1521492736.313 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-03-19T20:52:16.313Z,1521492736.313 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-03-19T20:52:16.314Z,1521492736.314 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-03-19T20:52:16.314Z,1521492736.314 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-03-19T20:52:16.323Z,1521492736.323 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-03-19T20:52:16.323Z,1521492736.323 [Default:B.GoToSurface](INFO): Received pitch timeout configuration 60.000000 seconds.
2018-03-19T20:52:16.323Z,1521492736.323 [Default:A.Wait] Running Loop=1
2018-03-19T20:52:16.323Z,1521492736.323 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:52:16.423Z,1521492736.423 [WetLabsBB2FL](INFO): Powering down
2018-03-19T20:52:16.595Z,1521492736.595 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-03-19T20:52:16.595Z,1521492736.595 [CTD_Seabird](INFO): Powering down
2018-03-19T20:52:16.783Z,1521492736.783 [Aanderaa_O2](INFO): Powering down
2018-03-19T20:52:21.056Z,1521492741.056 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180319T193343/Courier0052.lzma
2018-03-19T20:52:21.855Z,1521492741.855 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0052.lzma.bak
2018-03-19T20:52:21.856Z,1521492741.856 [DataOverHttps](INFO): SBD MOMSN=8138497
2018-03-19T20:52:29.513Z,1521492749.513 [Default:A.Wait](INFO): Done Waiting.
2018-03-19T20:52:29.513Z,1521492749.513 [Default:A.Wait] Stopped
2018-03-19T20:52:29.513Z,1521492749.513 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:52:29.923Z,1521492749.923 [Default:CheckIn] Running Loop=1
2018-03-19T20:52:29.923Z,1521492749.923 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T20:52:29.923Z,1521492749.923 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T20:52:31.859Z,1521492751.859 [NAL9602](INFO): GPS fix at 20180319T205231: (36.802145, -121.786811)
2018-03-19T20:52:31.931Z,1521492751.931 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:52:31.931Z,1521492751.931 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:52:41.375Z,1521492761.375 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20180319T193343/Courier0056.lzma
2018-03-19T20:52:42.167Z,1521492762.167 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0056.lzma.bak
2018-03-19T20:52:42.167Z,1521492762.167 [DataOverHttps](INFO): SBD MOMSN=8138499
2018-03-19T20:52:51.823Z,1521492771.823 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180319T193343/Courier0060.lzma
2018-03-19T20:52:52.629Z,1521492772.629 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0060.lzma.bak
2018-03-19T20:52:52.629Z,1521492772.629 [DataOverHttps](INFO): SBD MOMSN=8138502
2018-03-19T20:53:03.060Z,1521492783.060 [DataOverHttps](INFO): Sending 570 bytes from file Logs/20180319T193343/Express0049.lzma
2018-03-19T20:53:03.851Z,1521492783.851 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0049.lzma.bak
2018-03-19T20:53:03.851Z,1521492783.851 [DataOverHttps](INFO): SBD MOMSN=8138504
2018-03-19T20:53:08.047Z,1521492788.047 [NAL9602](INFO): Powering down
2018-03-19T20:53:13.218Z,1521492793.218 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20180319T193343/Express0053.lzma
2018-03-19T20:53:13.987Z,1521492793.987 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0053.lzma.bak
2018-03-19T20:53:13.987Z,1521492793.987 [DataOverHttps](INFO): SBD MOMSN=8138519
2018-03-19T20:53:23.794Z,1521492803.794 [DataOverHttps](INFO): Sending 207 bytes from file Logs/20180319T193343/Express0057.lzma
2018-03-19T20:53:24.595Z,1521492804.595 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0057.lzma.bak
2018-03-19T20:53:24.595Z,1521492804.595 [DataOverHttps](INFO): SBD MOMSN=8138521
2018-03-19T20:53:33.838Z,1521492813.838 [DataOverHttps](INFO): Sending 52 bytes from file Logs/20180319T193343/Express0061.lzma
2018-03-19T20:53:34.639Z,1521492814.639 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0061.lzma.bak
2018-03-19T20:53:34.640Z,1521492814.640 [DataOverHttps](INFO): SBD MOMSN=8138527
2018-03-19T20:53:35.100Z,1521492815.100 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:53:35.100Z,1521492815.100 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:53:35.101Z,1521492815.101 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:53:54.656Z,1521492834.656 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T20:55:16.447Z,1521492916.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:55:17.100Z,1521492917.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:57:08.447Z,1521493028.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:57:09.103Z,1521493029.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T20:58:35.567Z,1521493115.567 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T20:58:35.567Z,1521493115.567 [Default:CheckIn:C.Wait] Stopped
2018-03-19T20:58:35.568Z,1521493115.568 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T20:58:35.568Z,1521493115.568 [Default:CheckIn:D] Running Loop=1
2018-03-19T20:58:35.968Z,1521493115.968 [Default:CheckIn:D] Stopped
2018-03-19T20:58:35.968Z,1521493115.968 [Default:CheckIn:E] Running Loop=1
2018-03-19T20:58:36.366Z,1521493116.366 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 6.327589 min 
2018-03-19T20:58:36.366Z,1521493116.366 [Default:CheckIn:E] Stopped
2018-03-19T20:58:36.366Z,1521493116.366 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T20:58:36.366Z,1521493116.366 [Default:CheckIn] Stopped
2018-03-19T20:58:36.367Z,1521493116.367 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T20:58:36.367Z,1521493116.367 [Default:CheckIn](INFO): Running loop #2
2018-03-19T20:58:36.367Z,1521493116.367 [Default:CheckIn] Running Loop=2
2018-03-19T20:58:36.367Z,1521493116.367 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T20:58:36.367Z,1521493116.367 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T20:58:37.112Z,1521493117.112 [NAL9602](INFO): Powering up
2018-03-19T20:58:47.996Z,1521493127.996 [NAL9602](INFO): NAL9602 initialized
2018-03-19T20:59:15.997Z,1521493155.997 [NAL9602](INFO): SBD MO Status=0, MOMSN=4861, MT Status=0, MTMSN=0
2018-03-19T20:59:15.997Z,1521493155.997 [NAL9602](INFO): No messages in MT queue
2018-03-19T20:59:17.199Z,1521493157.199 [NAL9602](INFO): GPS fix at 20180319T205916: (36.802293, -121.786825)
2018-03-19T20:59:17.278Z,1521493157.278 [UniversalFixResidualReporter](INFO): Fix residual: 100.8 %DT, over the last 1676.6 m. Residual distance 1689.6 m at bearing 137.5 degrees. Fix at (36.8023, -121.7868) with 16.5 m made good.
2018-03-19T20:59:17.283Z,1521493157.283 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T20:59:17.283Z,1521493157.283 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T20:59:21.755Z,1521493161.755 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0064.lzma
2018-03-19T20:59:22.528Z,1521493162.528 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0064.lzma.bak
2018-03-19T20:59:22.528Z,1521493162.528 [DataOverHttps](INFO): SBD MOMSN=8138530
2018-03-19T20:59:31.620Z,1521493171.620 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0065.lzma
2018-03-19T20:59:32.419Z,1521493172.419 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0065.lzma.bak
2018-03-19T20:59:32.419Z,1521493172.419 [DataOverHttps](INFO): SBD MOMSN=8138533
2018-03-19T20:59:32.880Z,1521493172.880 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T20:59:32.880Z,1521493172.880 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T20:59:32.880Z,1521493172.880 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T20:59:51.980Z,1521493191.980 [NAL9602](INFO): Powering down
2018-03-19T21:00:52.442Z,1521493252.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:00:53.100Z,1521493253.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:02:58.435Z,1521493378.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:02:59.091Z,1521493379.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:03:54.983Z,1521493434.983 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T21:04:33.361Z,1521493473.361 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:04:33.361Z,1521493473.361 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:04:33.361Z,1521493473.361 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:04:33.361Z,1521493473.361 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:04:33.751Z,1521493473.751 [Default:CheckIn:D] Stopped
2018-03-19T21:04:33.751Z,1521493473.751 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:04:34.255Z,1521493474.255 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 12.290638 min 
2018-03-19T21:04:34.256Z,1521493474.256 [Default:CheckIn:E] Stopped
2018-03-19T21:04:34.256Z,1521493474.256 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:04:34.256Z,1521493474.256 [Default:CheckIn] Stopped
2018-03-19T21:04:34.256Z,1521493474.256 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:04:34.256Z,1521493474.256 [Default:CheckIn](INFO): Running loop #3
2018-03-19T21:04:34.256Z,1521493474.256 [Default:CheckIn] Running Loop=3
2018-03-19T21:04:34.256Z,1521493474.256 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:04:34.256Z,1521493474.256 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:04:37.803Z,1521493477.803 [NAL9602](INFO): Powering up
2018-03-19T21:04:48.701Z,1521493488.701 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:04:50.435Z,1521493490.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:04:51.091Z,1521493491.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:05:05.897Z,1521493505.897 [NAL9602](INFO): SBD MO Status=0, MOMSN=4862, MT Status=0, MTMSN=0
2018-03-19T21:05:05.897Z,1521493505.897 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:05:25.104Z,1521493525.104 [NAL9602](INFO): GPS fix at 20180319T210524: (36.802257, -121.786835)
2018-03-19T21:05:25.169Z,1521493525.169 [UniversalFixResidualReporter](INFO): Fix residual: 99.8 %DT, over the last 1521.7 m. Residual distance 1519.4 m at bearing 136.9 degrees. Fix at (36.8023, -121.7868) with 4.1 m made good.
2018-03-19T21:05:25.170Z,1521493525.170 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:05:25.170Z,1521493525.170 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:05:29.701Z,1521493529.701 [DataOverHttps](INFO): Sending 71 bytes from file Logs/20180319T193343/Courier0068.lzma
2018-03-19T21:05:30.500Z,1521493530.500 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0068.lzma.bak
2018-03-19T21:05:30.500Z,1521493530.500 [DataOverHttps](INFO): SBD MOMSN=8138537
2018-03-19T21:05:39.907Z,1521493539.907 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0069.lzma
2018-03-19T21:05:40.699Z,1521493540.699 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0069.lzma.bak
2018-03-19T21:05:40.699Z,1521493540.699 [DataOverHttps](INFO): SBD MOMSN=8138541
2018-03-19T21:05:41.162Z,1521493541.162 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:05:41.162Z,1521493541.162 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:05:41.162Z,1521493541.162 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:05:59.772Z,1521493559.772 [NAL9602](INFO): Powering down
2018-03-19T21:06:56.452Z,1521493616.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:06:57.087Z,1521493617.087 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:08:34.431Z,1521493714.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:08:35.091Z,1521493715.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:08:48.444Z,1521493728.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:08:49.094Z,1521493729.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:10:40.439Z,1521493840.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:10:41.091Z,1521493841.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:10:41.621Z,1521493841.621 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:10:41.622Z,1521493841.622 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:10:41.622Z,1521493841.622 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:10:41.622Z,1521493841.622 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:10:42.023Z,1521493842.023 [Default:CheckIn:D] Stopped
2018-03-19T21:10:42.023Z,1521493842.023 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:10:42.416Z,1521493842.416 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 18.428503 min 
2018-03-19T21:10:42.417Z,1521493842.417 [Default:CheckIn:E] Stopped
2018-03-19T21:10:42.417Z,1521493842.417 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:10:42.417Z,1521493842.417 [Default:CheckIn] Stopped
2018-03-19T21:10:42.417Z,1521493842.417 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:10:42.417Z,1521493842.417 [Default:CheckIn](INFO): Running loop #4
2018-03-19T21:10:42.417Z,1521493842.417 [Default:CheckIn] Running Loop=4
2018-03-19T21:10:42.417Z,1521493842.417 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:10:42.417Z,1521493842.417 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:10:45.988Z,1521493845.988 [NAL9602](INFO): Powering up
2018-03-19T21:10:56.876Z,1521493856.876 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:11:12.077Z,1521493872.077 [NAL9602](INFO): SBD MO Status=0, MOMSN=4863, MT Status=0, MTMSN=0
2018-03-19T21:11:12.077Z,1521493872.077 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:12:00.995Z,1521493920.995 [NAL9602](INFO): GPS fix at 20180319T211200: (36.802249, -121.787022)
2018-03-19T21:12:01.075Z,1521493921.075 [UniversalFixResidualReporter](INFO): Fix residual: 100.7 %DT, over the last 1637.4 m. Residual distance 1648.2 m at bearing 136.6 degrees. Fix at (36.8022, -121.7870) with 16.7 m made good.
2018-03-19T21:12:01.075Z,1521493921.075 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:12:01.076Z,1521493921.076 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:12:11.899Z,1521493931.899 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0072.lzma
2018-03-19T21:12:12.691Z,1521493932.691 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0072.lzma.bak
2018-03-19T21:12:12.691Z,1521493932.691 [DataOverHttps](INFO): SBD MOMSN=8138545
2018-03-19T21:12:23.299Z,1521493943.299 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180319T193343/Express0073.lzma
2018-03-19T21:12:24.083Z,1521493944.083 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0073.lzma.bak
2018-03-19T21:12:24.084Z,1521493944.084 [DataOverHttps](INFO): SBD MOMSN=8138548
2018-03-19T21:12:24.553Z,1521493944.553 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:12:24.553Z,1521493944.553 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:12:24.553Z,1521493944.553 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:12:32.427Z,1521493952.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:12:33.091Z,1521493953.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:12:33.376Z,1521493953.376 [NAL9602](INFO): Powering down
2018-03-19T21:13:55.315Z,1521494035.315 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T21:14:38.431Z,1521494078.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:14:39.123Z,1521494079.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:17:25.348Z,1521494245.348 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:17:25.348Z,1521494245.348 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:17:25.348Z,1521494245.348 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:17:25.349Z,1521494245.349 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:17:25.755Z,1521494245.755 [Default:CheckIn:D] Stopped
2018-03-19T21:17:25.755Z,1521494245.755 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:17:29.101Z,1521494249.101 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 25.157375 min 
2018-03-19T21:17:29.101Z,1521494249.101 [Default:CheckIn:E] Stopped
2018-03-19T21:17:29.101Z,1521494249.101 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:17:29.101Z,1521494249.101 [Default:CheckIn] Stopped
2018-03-19T21:17:29.101Z,1521494249.101 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:17:29.102Z,1521494249.102 [Default:CheckIn](INFO): Running loop #5
2018-03-19T21:17:29.102Z,1521494249.102 [Default:CheckIn] Running Loop=5
2018-03-19T21:17:29.102Z,1521494249.102 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:17:29.102Z,1521494249.102 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:17:29.523Z,1521494249.523 [NAL9602](INFO): Powering up
2018-03-19T21:17:40.724Z,1521494260.724 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:17:58.325Z,1521494278.325 [NAL9602](INFO): SBD MO Status=0, MOMSN=4864, MT Status=0, MTMSN=0
2018-03-19T21:17:58.325Z,1521494278.325 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:18:03.128Z,1521494283.128 [NAL9602](INFO): GPS fix at 20180319T211802: (36.802293, -121.786788)
2018-03-19T21:18:03.184Z,1521494283.184 [UniversalFixResidualReporter](INFO): Fix residual: 99.3 %DT, over the last 1497.6 m. Residual distance 1487.1 m at bearing 137.8 degrees. Fix at (36.8023, -121.7868) with 21.4 m made good.
2018-03-19T21:18:03.185Z,1521494283.185 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:18:03.185Z,1521494283.185 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:18:07.744Z,1521494287.744 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0076.lzma
2018-03-19T21:18:08.535Z,1521494288.535 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0076.lzma.bak
2018-03-19T21:18:08.535Z,1521494288.535 [DataOverHttps](INFO): SBD MOMSN=8138552
2018-03-19T21:18:17.635Z,1521494297.635 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0077.lzma
2018-03-19T21:18:18.427Z,1521494298.427 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0077.lzma.bak
2018-03-19T21:18:18.427Z,1521494298.427 [DataOverHttps](INFO): SBD MOMSN=8138555
2018-03-19T21:18:18.890Z,1521494298.890 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:18:18.890Z,1521494298.890 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:18:18.890Z,1521494298.890 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:18:37.956Z,1521494317.956 [NAL9602](INFO): Powering down
2018-03-19T21:22:20.419Z,1521494540.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:22:21.103Z,1521494541.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:23:19.351Z,1521494599.351 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:23:19.351Z,1521494599.351 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:23:19.351Z,1521494599.351 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:23:19.351Z,1521494599.351 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:23:19.758Z,1521494599.758 [Default:CheckIn:D] Stopped
2018-03-19T21:23:19.758Z,1521494599.758 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:23:20.158Z,1521494600.158 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.057422 min 
2018-03-19T21:23:20.159Z,1521494600.159 [Default:CheckIn:E] Stopped
2018-03-19T21:23:20.159Z,1521494600.159 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:23:20.159Z,1521494600.159 [Default:CheckIn] Stopped
2018-03-19T21:23:20.159Z,1521494600.159 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:23:20.159Z,1521494600.159 [Default:CheckIn](INFO): Running loop #6
2018-03-19T21:23:20.159Z,1521494600.159 [Default:CheckIn] Running Loop=6
2018-03-19T21:23:20.159Z,1521494600.159 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:23:20.159Z,1521494600.159 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:23:20.908Z,1521494600.908 [NAL9602](INFO): Powering up
2018-03-19T21:23:31.824Z,1521494611.824 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:23:46.241Z,1521494626.241 [NAL9602](INFO): SBD MO Status=0, MOMSN=4865, MT Status=0, MTMSN=0
2018-03-19T21:23:46.241Z,1521494626.241 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:23:55.514Z,1521494635.514 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T21:24:01.829Z,1521494641.829 [NAL9602](INFO): GPS fix at 20180319T212401: (36.802274, -121.786838)
2018-03-19T21:24:01.896Z,1521494641.896 [UniversalFixResidualReporter](INFO): Fix residual: 100.1 %DT, over the last 1483.5 m. Residual distance 1484.9 m at bearing 136.8 degrees. Fix at (36.8023, -121.7868) with 4.9 m made good.
2018-03-19T21:24:01.897Z,1521494641.897 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:24:01.897Z,1521494641.897 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:24:06.765Z,1521494646.765 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0080.lzma
2018-03-19T21:24:07.564Z,1521494647.564 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0080.lzma.bak
2018-03-19T21:24:07.564Z,1521494647.564 [DataOverHttps](INFO): SBD MOMSN=8138559
2018-03-19T21:24:17.412Z,1521494657.412 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0081.lzma
2018-03-19T21:24:18.211Z,1521494658.211 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0081.lzma.bak
2018-03-19T21:24:18.212Z,1521494658.212 [DataOverHttps](INFO): SBD MOMSN=8138562
2018-03-19T21:24:18.676Z,1521494658.676 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:24:18.676Z,1521494658.676 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:24:18.676Z,1521494658.676 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:24:36.500Z,1521494676.500 [NAL9602](INFO): Powering down
2018-03-19T21:26:18.415Z,1521494778.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:26:19.107Z,1521494779.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:29:19.283Z,1521494959.283 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:29:19.283Z,1521494959.283 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:29:19.283Z,1521494959.283 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:29:19.283Z,1521494959.283 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:29:19.615Z,1521494959.615 [Default:CheckIn:D] Stopped
2018-03-19T21:29:19.615Z,1521494959.615 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:29:20.030Z,1521494960.030 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 37.055042 min 
2018-03-19T21:29:20.030Z,1521494960.030 [Default:CheckIn:E] Stopped
2018-03-19T21:29:20.030Z,1521494960.030 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:29:20.030Z,1521494960.030 [Default:CheckIn] Stopped
2018-03-19T21:29:20.042Z,1521494960.042 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:29:20.043Z,1521494960.043 [Default:CheckIn](INFO): Running loop #7
2018-03-19T21:29:20.043Z,1521494960.043 [Default:CheckIn] Running Loop=7
2018-03-19T21:29:20.043Z,1521494960.043 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:29:20.043Z,1521494960.043 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:29:20.771Z,1521494960.771 [NAL9602](INFO): Powering up
2018-03-19T21:29:31.648Z,1521494971.648 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:29:46.045Z,1521494986.045 [NAL9602](INFO): SBD MO Status=0, MOMSN=4866, MT Status=0, MTMSN=0
2018-03-19T21:29:46.045Z,1521494986.045 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:30:02.052Z,1521495002.052 [NAL9602](INFO): GPS fix at 20180319T213001: (36.802222, -121.786842)
2018-03-19T21:30:02.132Z,1521495002.132 [UniversalFixResidualReporter](INFO): Fix residual: 99.7 %DT, over the last 1489.7 m. Residual distance 1485.7 m at bearing 136.9 degrees. Fix at (36.8022, -121.7868) with 5.8 m made good.
2018-03-19T21:30:02.132Z,1521495002.132 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:30:02.133Z,1521495002.133 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:30:06.594Z,1521495006.594 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0084.lzma
2018-03-19T21:30:07.392Z,1521495007.392 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0084.lzma.bak
2018-03-19T21:30:07.392Z,1521495007.392 [DataOverHttps](INFO): SBD MOMSN=8138599
2018-03-19T21:30:16.415Z,1521495016.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:30:16.468Z,1521495016.468 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20180319T193343/Express0085.lzma
2018-03-19T21:30:17.068Z,1521495017.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:30:17.267Z,1521495017.267 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0085.lzma.bak
2018-03-19T21:30:17.268Z,1521495017.268 [DataOverHttps](INFO): SBD MOMSN=8138602
2018-03-19T21:30:17.733Z,1521495017.733 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:30:17.733Z,1521495017.733 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:30:17.734Z,1521495017.734 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:30:36.916Z,1521495036.916 [NAL9602](INFO): Powering down
2018-03-19T21:31:05.935Z,1521495065.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:06.731Z,1521495066.731 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:07.371Z,1521495067.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:08.167Z,1521495068.167 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:08.963Z,1521495068.963 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:09.615Z,1521495069.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:10.411Z,1521495070.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:11.209Z,1521495071.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:11.621Z,1521495071.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:12.415Z,1521495072.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:13.067Z,1521495073.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:13.863Z,1521495073.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:14.660Z,1521495074.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:15.077Z,1521495075.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:15.871Z,1521495075.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:16.668Z,1521495076.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:17.083Z,1521495077.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:17.879Z,1521495077.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:18.675Z,1521495078.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:19.131Z,1521495079.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:19.927Z,1521495079.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:20.723Z,1521495080.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:21.323Z,1521495081.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:22.120Z,1521495082.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:22.915Z,1521495082.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:23.615Z,1521495083.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:24.411Z,1521495084.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:25.208Z,1521495085.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:25.615Z,1521495085.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:26.411Z,1521495086.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:27.071Z,1521495087.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:27.867Z,1521495087.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:28.664Z,1521495088.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:29.075Z,1521495089.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:29.871Z,1521495089.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:30.668Z,1521495090.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:31.096Z,1521495091.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:31.895Z,1521495091.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:32.692Z,1521495092.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:33.155Z,1521495093.155 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:33.975Z,1521495093.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:31:34.771Z,1521495094.771 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:32:22.451Z,1521495142.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:32:23.075Z,1521495143.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:33:55.818Z,1521495235.818 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T21:34:14.407Z,1521495254.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:34:15.063Z,1521495255.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:35:18.380Z,1521495318.380 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:35:18.380Z,1521495318.380 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:35:18.380Z,1521495318.380 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:35:18.381Z,1521495318.381 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:35:18.794Z,1521495318.794 [Default:CheckIn:D] Stopped
2018-03-19T21:35:18.794Z,1521495318.794 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:35:21.995Z,1521495321.995 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 43.041353 min 
2018-03-19T21:35:21.995Z,1521495321.995 [Default:CheckIn:E] Stopped
2018-03-19T21:35:21.995Z,1521495321.995 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:35:21.995Z,1521495321.995 [Default:CheckIn] Stopped
2018-03-19T21:35:21.995Z,1521495321.995 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:35:21.995Z,1521495321.995 [Default:CheckIn](INFO): Running loop #8
2018-03-19T21:35:21.995Z,1521495321.995 [Default:CheckIn] Running Loop=8
2018-03-19T21:35:21.996Z,1521495321.996 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:35:21.996Z,1521495321.996 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:35:22.428Z,1521495322.428 [NAL9602](INFO): Powering up
2018-03-19T21:35:33.616Z,1521495333.616 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:35:44.821Z,1521495344.821 [NAL9602](INFO): SBD MO Status=0, MOMSN=4867, MT Status=0, MTMSN=0
2018-03-19T21:35:44.821Z,1521495344.821 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:36:01.223Z,1521495361.223 [NAL9602](INFO): GPS fix at 20180319T213600: (36.802233, -121.786877)
2018-03-19T21:36:01.276Z,1521495361.276 [UniversalFixResidualReporter](INFO): Fix residual: 100.2 %DT, over the last 1485.1 m. Residual distance 1488.1 m at bearing 137.0 degrees. Fix at (36.8022, -121.7869) with 3.3 m made good.
2018-03-19T21:36:01.277Z,1521495361.277 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:36:01.277Z,1521495361.277 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:36:05.863Z,1521495365.863 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0088.lzma
2018-03-19T21:36:06.690Z,1521495366.690 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0088.lzma.bak
2018-03-19T21:36:06.690Z,1521495366.690 [DataOverHttps](INFO): SBD MOMSN=8138612
2018-03-19T21:36:17.296Z,1521495377.296 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0089.lzma
2018-03-19T21:36:18.077Z,1521495378.077 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0089.lzma.bak
2018-03-19T21:36:18.077Z,1521495378.077 [DataOverHttps](INFO): SBD MOMSN=8138615
2018-03-19T21:36:18.543Z,1521495378.543 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:36:18.543Z,1521495378.543 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:36:18.543Z,1521495378.543 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:36:36.060Z,1521495396.060 [NAL9602](INFO): Powering down
2018-03-19T21:38:12.415Z,1521495492.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:38:13.083Z,1521495493.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:38:26.411Z,1521495506.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:38:27.071Z,1521495507.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:18.403Z,1521495618.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:19.063Z,1521495619.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:27.315Z,1521495627.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:28.112Z,1521495628.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:28.907Z,1521495628.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:29.607Z,1521495629.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:30.403Z,1521495630.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:31.200Z,1521495631.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:31.607Z,1521495631.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:32.404Z,1521495632.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:33.063Z,1521495633.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:33.859Z,1521495633.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:34.656Z,1521495634.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:35.075Z,1521495635.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:35.871Z,1521495635.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:36.668Z,1521495636.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:37.079Z,1521495637.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:37.875Z,1521495637.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:38.671Z,1521495638.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:39.127Z,1521495639.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:39.923Z,1521495639.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:40.719Z,1521495640.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:41.343Z,1521495641.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:42.139Z,1521495642.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:42.935Z,1521495642.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:43.607Z,1521495643.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:44.403Z,1521495644.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:45.200Z,1521495645.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:45.615Z,1521495645.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:46.411Z,1521495646.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:47.063Z,1521495647.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:47.859Z,1521495647.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:48.656Z,1521495648.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:49.067Z,1521495649.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:49.863Z,1521495649.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:50.660Z,1521495650.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:51.075Z,1521495651.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:51.871Z,1521495651.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:52.667Z,1521495652.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:53.131Z,1521495653.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:53.927Z,1521495653.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:54.723Z,1521495654.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:55.355Z,1521495655.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:40:56.151Z,1521495656.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:05.875Z,1521495665.875 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:06.671Z,1521495666.671 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:07.139Z,1521495667.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:07.935Z,1521495667.935 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:08.733Z,1521495668.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:09.339Z,1521495669.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:10.147Z,1521495670.147 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:10.943Z,1521495670.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:11.607Z,1521495671.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:11.715Z,1521495671.715 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.386239 seconds old.
2018-03-19T21:41:11.718Z,1521495671.718 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.386254 seconds old.
2018-03-19T21:41:12.121Z,1521495672.121 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.791975 seconds old.
2018-03-19T21:41:12.123Z,1521495672.123 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.792036 seconds old.
2018-03-19T21:41:12.403Z,1521495672.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:12.509Z,1521495672.509 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.179638 seconds old.
2018-03-19T21:41:12.511Z,1521495672.511 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.179812 seconds old.
2018-03-19T21:41:12.916Z,1521495672.916 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.587011 seconds old.
2018-03-19T21:41:12.918Z,1521495672.918 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.586987 seconds old.
2018-03-19T21:41:13.200Z,1521495673.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:13.611Z,1521495673.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:14.407Z,1521495674.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:15.063Z,1521495675.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:15.859Z,1521495675.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:16.656Z,1521495676.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:17.083Z,1521495677.083 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:17.881Z,1521495677.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:18.676Z,1521495678.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:19.084Z,1521495679.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:19.334Z,1521495679.334 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:41:19.335Z,1521495679.335 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:41:19.335Z,1521495679.335 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:41:19.335Z,1521495679.335 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:41:19.733Z,1521495679.733 [Default:CheckIn:D] Stopped
2018-03-19T21:41:19.733Z,1521495679.733 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:41:19.879Z,1521495679.879 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:20.675Z,1521495680.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:21.131Z,1521495681.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:21.927Z,1521495681.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:22.723Z,1521495682.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:23.020Z,1521495683.020 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 49.057007 min 
2018-03-19T21:41:23.020Z,1521495683.020 [Default:CheckIn:E] Stopped
2018-03-19T21:41:23.020Z,1521495683.020 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:41:23.020Z,1521495683.020 [Default:CheckIn] Stopped
2018-03-19T21:41:23.020Z,1521495683.020 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:41:23.021Z,1521495683.021 [Default:CheckIn](INFO): Running loop #9
2018-03-19T21:41:23.021Z,1521495683.021 [Default:CheckIn] Running Loop=9
2018-03-19T21:41:23.021Z,1521495683.021 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:41:23.021Z,1521495683.021 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:41:23.319Z,1521495683.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:23.448Z,1521495683.448 [NAL9602](INFO): Powering up
2018-03-19T21:41:24.115Z,1521495684.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:24.911Z,1521495684.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:25.607Z,1521495685.607 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:26.403Z,1521495686.403 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:27.200Z,1521495687.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:27.611Z,1521495687.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:28.407Z,1521495688.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:29.091Z,1521495689.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:29.887Z,1521495689.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:30.684Z,1521495690.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:31.119Z,1521495691.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:31.915Z,1521495691.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:32.711Z,1521495692.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:33.115Z,1521495693.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:33.911Z,1521495693.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:34.244Z,1521495694.244 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:41:34.708Z,1521495694.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:35.127Z,1521495695.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:35.923Z,1521495695.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:36.727Z,1521495696.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:37.321Z,1521495697.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:38.115Z,1521495698.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:51.319Z,1521495711.319 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:41:52.115Z,1521495712.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:42:11.445Z,1521495731.445 [NAL9602](INFO): SBD MO Status=2, MOMSN=4868, MT Status=2, MTMSN=0
2018-03-19T21:42:11.445Z,1521495731.445 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T21:42:24.427Z,1521495744.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:42:24.815Z,1521495744.815 [NAL9602](INFO): SBD MO Status=0, MOMSN=4868, MT Status=0, MTMSN=0
2018-03-19T21:42:24.815Z,1521495744.815 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:42:25.084Z,1521495745.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:42:25.735Z,1521495745.735 [NAL9602](INFO): GPS fix at 20180319T214225: (36.802310, -121.786761)
2018-03-19T21:42:25.804Z,1521495745.804 [UniversalFixResidualReporter](INFO): Fix residual: 100.0 %DT, over the last 1590.0 m. Residual distance 1589.3 m at bearing 137.4 degrees. Fix at (36.8023, -121.7868) with 13.5 m made good.
2018-03-19T21:42:25.805Z,1521495745.805 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:42:25.805Z,1521495745.805 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:42:30.319Z,1521495750.319 [DataOverHttps](INFO): Sending 73 bytes from file Logs/20180319T193343/Courier0092.lzma
2018-03-19T21:42:31.104Z,1521495751.104 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0092.lzma.bak
2018-03-19T21:42:31.104Z,1521495751.104 [DataOverHttps](INFO): SBD MOMSN=8138634
2018-03-19T21:42:40.257Z,1521495760.257 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180319T193343/Express0093.lzma
2018-03-19T21:42:41.051Z,1521495761.051 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0093.lzma.bak
2018-03-19T21:42:41.052Z,1521495761.052 [DataOverHttps](INFO): SBD MOMSN=8138637
2018-03-19T21:42:41.516Z,1521495761.516 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:42:41.516Z,1521495761.516 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:42:41.516Z,1521495761.516 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:43:00.604Z,1521495780.604 [NAL9602](INFO): Powering down
2018-03-19T21:43:56.026Z,1521495836.026 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T21:46:22.407Z,1521495982.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:46:23.063Z,1521495983.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:47:42.167Z,1521496062.167 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:47:42.167Z,1521496062.167 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:47:42.167Z,1521496062.167 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:47:42.167Z,1521496062.167 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:47:42.569Z,1521496062.569 [Default:CheckIn:D] Stopped
2018-03-19T21:47:42.569Z,1521496062.569 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:47:42.974Z,1521496062.974 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 55.437602 min 
2018-03-19T21:47:42.974Z,1521496062.974 [Default:CheckIn:E] Stopped
2018-03-19T21:47:42.975Z,1521496062.975 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:47:42.975Z,1521496062.975 [Default:CheckIn] Stopped
2018-03-19T21:47:42.975Z,1521496062.975 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:47:42.975Z,1521496062.975 [Default:CheckIn](INFO): Running loop #10
2018-03-19T21:47:42.975Z,1521496062.975 [Default:CheckIn] Running Loop=10
2018-03-19T21:47:42.975Z,1521496062.975 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:47:42.975Z,1521496062.975 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:47:46.312Z,1521496066.312 [NAL9602](INFO): Powering up
2018-03-19T21:47:57.476Z,1521496077.476 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:48:14.419Z,1521496094.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:48:15.051Z,1521496095.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:48:19.873Z,1521496099.873 [NAL9602](INFO): SBD MO Status=2, MOMSN=4869, MT Status=2, MTMSN=0
2018-03-19T21:48:19.873Z,1521496099.873 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T21:48:37.077Z,1521496117.077 [NAL9602](INFO): SBD MO Status=2, MOMSN=4869, MT Status=2, MTMSN=0
2018-03-19T21:48:37.077Z,1521496117.077 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T21:49:01.641Z,1521496141.641 [NAL9602](INFO): SBD MO Status=0, MOMSN=4869, MT Status=0, MTMSN=0
2018-03-19T21:49:01.641Z,1521496141.641 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:49:02.844Z,1521496142.844 [NAL9602](INFO): GPS fix at 20180319T214902: (36.802284, -121.786848)
2018-03-19T21:49:02.939Z,1521496142.939 [UniversalFixResidualReporter](INFO): Fix residual: 100.2 %DT, over the last 1642.0 m. Residual distance 1645.1 m at bearing 136.7 degrees. Fix at (36.8023, -121.7868) with 8.3 m made good.
2018-03-19T21:49:02.940Z,1521496142.940 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:49:02.940Z,1521496142.940 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:49:08.657Z,1521496148.657 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0096.lzma
2018-03-19T21:49:09.455Z,1521496149.455 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0096.lzma.bak
2018-03-19T21:49:09.456Z,1521496149.456 [DataOverHttps](INFO): SBD MOMSN=8138641
2018-03-19T21:49:18.509Z,1521496158.509 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0097.lzma
2018-03-19T21:49:19.309Z,1521496159.309 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0097.lzma.bak
2018-03-19T21:49:19.309Z,1521496159.309 [DataOverHttps](INFO): SBD MOMSN=8138644
2018-03-19T21:49:19.772Z,1521496159.772 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:49:19.772Z,1521496159.772 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:49:19.772Z,1521496159.772 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:49:35.560Z,1521496175.560 [NAL9602](INFO): Powering down
2018-03-19T21:53:56.039Z,1521496436.039 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T21:54:20.423Z,1521496460.423 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T21:54:20.423Z,1521496460.423 [Default:CheckIn:C.Wait] Stopped
2018-03-19T21:54:20.423Z,1521496460.423 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T21:54:20.424Z,1521496460.424 [Default:CheckIn:D] Running Loop=1
2018-03-19T21:54:20.843Z,1521496460.843 [Default:CheckIn:D] Stopped
2018-03-19T21:54:20.843Z,1521496460.843 [Default:CheckIn:E] Running Loop=1
2018-03-19T21:54:25.583Z,1521496465.583 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.075496 min 
2018-03-19T21:54:25.583Z,1521496465.583 [Default:CheckIn:E] Stopped
2018-03-19T21:54:25.583Z,1521496465.583 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T21:54:25.583Z,1521496465.583 [Default:CheckIn] Stopped
2018-03-19T21:54:25.583Z,1521496465.583 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T21:54:25.583Z,1521496465.583 [Default:CheckIn](INFO): Running loop #11
2018-03-19T21:54:25.583Z,1521496465.583 [Default:CheckIn] Running Loop=11
2018-03-19T21:54:25.584Z,1521496465.584 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T21:54:25.584Z,1521496465.584 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T21:54:26.015Z,1521496466.015 [NAL9602](INFO): Powering up
2018-03-19T21:54:37.204Z,1521496477.204 [NAL9602](INFO): NAL9602 initialized
2018-03-19T21:54:49.605Z,1521496489.605 [NAL9602](INFO): SBD MO Status=0, MOMSN=4870, MT Status=0, MTMSN=0
2018-03-19T21:54:49.605Z,1521496489.605 [NAL9602](INFO): No messages in MT queue
2018-03-19T21:55:00.007Z,1521496500.007 [NAL9602](INFO): GPS fix at 20180319T215459: (36.802295, -121.786861)
2018-03-19T21:55:00.072Z,1521496500.072 [UniversalFixResidualReporter](INFO): Fix residual: 100.1 %DT, over the last 1476.6 m. Residual distance 1478.4 m at bearing 137.0 degrees. Fix at (36.8023, -121.7869) with 1.8 m made good.
2018-03-19T21:55:00.073Z,1521496500.073 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T21:55:00.073Z,1521496500.073 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T21:55:04.537Z,1521496504.537 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0100.lzma
2018-03-19T21:55:05.327Z,1521496505.327 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0100.lzma.bak
2018-03-19T21:55:05.328Z,1521496505.328 [DataOverHttps](INFO): SBD MOMSN=8138658
2018-03-19T21:55:14.354Z,1521496514.354 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180319T193343/Express0101.lzma
2018-03-19T21:55:15.152Z,1521496515.152 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0101.lzma.bak
2018-03-19T21:55:15.152Z,1521496515.152 [DataOverHttps](INFO): SBD MOMSN=8138661
2018-03-19T21:55:15.647Z,1521496515.647 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T21:55:15.647Z,1521496515.647 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T21:55:15.647Z,1521496515.647 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T21:55:34.668Z,1521496534.668 [NAL9602](INFO): Powering down
2018-03-19T21:56:24.399Z,1521496584.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:25.051Z,1521496585.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:33.315Z,1521496593.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:34.111Z,1521496594.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:34.907Z,1521496594.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:35.591Z,1521496595.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:36.389Z,1521496596.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:37.184Z,1521496597.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:37.591Z,1521496597.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:38.387Z,1521496598.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:39.043Z,1521496599.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:39.841Z,1521496599.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:40.636Z,1521496600.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:41.055Z,1521496601.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:41.851Z,1521496601.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:42.655Z,1521496602.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:43.059Z,1521496603.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:43.855Z,1521496603.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:44.651Z,1521496604.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:45.119Z,1521496605.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:45.915Z,1521496605.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:46.711Z,1521496606.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:47.300Z,1521496607.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:48.095Z,1521496608.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:50.383Z,1521496610.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:51.180Z,1521496611.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:51.591Z,1521496611.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:57.863Z,1521496617.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:58.659Z,1521496618.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:59.128Z,1521496619.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:56:59.924Z,1521496619.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:00.719Z,1521496620.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:01.307Z,1521496621.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:02.103Z,1521496622.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:02.899Z,1521496622.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:03.591Z,1521496623.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:04.387Z,1521496624.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:05.185Z,1521496625.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:05.595Z,1521496625.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:06.391Z,1521496626.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:07.047Z,1521496627.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:07.845Z,1521496627.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:08.658Z,1521496628.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:09.067Z,1521496629.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:09.863Z,1521496629.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:10.660Z,1521496630.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:11.067Z,1521496631.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:11.863Z,1521496631.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:12.659Z,1521496632.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:13.131Z,1521496633.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:13.927Z,1521496633.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:14.723Z,1521496634.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:15.299Z,1521496635.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:16.096Z,1521496636.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:16.891Z,1521496636.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:17.599Z,1521496637.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:18.397Z,1521496638.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:19.192Z,1521496639.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:19.599Z,1521496639.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:20.395Z,1521496640.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:21.043Z,1521496641.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:21.839Z,1521496641.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:22.640Z,1521496642.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:23.064Z,1521496643.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:23.859Z,1521496643.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:24.656Z,1521496644.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:25.067Z,1521496645.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:25.863Z,1521496645.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:26.661Z,1521496646.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:27.123Z,1521496647.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:27.919Z,1521496647.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:28.715Z,1521496648.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:29.303Z,1521496649.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:30.101Z,1521496650.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:30.895Z,1521496650.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:31.587Z,1521496651.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:32.383Z,1521496652.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:33.181Z,1521496653.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:33.599Z,1521496653.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:34.395Z,1521496654.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:35.043Z,1521496655.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:35.839Z,1521496655.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:36.636Z,1521496656.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:37.059Z,1521496657.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:37.856Z,1521496657.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:38.652Z,1521496658.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:39.103Z,1521496659.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:39.899Z,1521496659.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:40.696Z,1521496660.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:41.131Z,1521496661.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:41.927Z,1521496661.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:42.723Z,1521496662.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:43.303Z,1521496663.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:44.099Z,1521496664.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:44.896Z,1521496664.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:45.587Z,1521496665.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:46.383Z,1521496666.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:47.180Z,1521496667.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:47.595Z,1521496667.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:48.391Z,1521496668.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:49.056Z,1521496669.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:49.851Z,1521496669.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:50.648Z,1521496670.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:51.107Z,1521496671.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:51.903Z,1521496671.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:52.699Z,1521496672.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:53.115Z,1521496673.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:53.911Z,1521496673.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:54.708Z,1521496674.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:55.115Z,1521496675.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:55.911Z,1521496675.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:56.707Z,1521496676.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:57.299Z,1521496677.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:58.095Z,1521496678.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:58.891Z,1521496678.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:57:59.591Z,1521496679.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:00.387Z,1521496680.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:01.184Z,1521496681.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:01.595Z,1521496681.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:02.391Z,1521496682.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:03.057Z,1521496683.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:03.852Z,1521496683.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:04.648Z,1521496684.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:05.127Z,1521496685.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:05.923Z,1521496685.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:06.719Z,1521496686.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:07.123Z,1521496687.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:07.919Z,1521496687.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:08.716Z,1521496688.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:09.123Z,1521496689.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:09.919Z,1521496689.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:10.715Z,1521496690.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:11.299Z,1521496691.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:12.096Z,1521496692.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:12.891Z,1521496692.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:13.587Z,1521496693.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:14.383Z,1521496694.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:15.180Z,1521496695.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:15.603Z,1521496695.603 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:16.399Z,1521496696.399 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:17.043Z,1521496697.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:17.839Z,1521496697.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:18.636Z,1521496698.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:58:19.051Z,1521496699.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:03.863Z,1521496743.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:04.659Z,1521496744.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:05.115Z,1521496745.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:05.911Z,1521496745.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:06.707Z,1521496746.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:07.303Z,1521496747.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:08.100Z,1521496748.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:08.895Z,1521496748.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:09.591Z,1521496749.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:10.387Z,1521496750.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:11.184Z,1521496751.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:11.591Z,1521496751.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:12.387Z,1521496752.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:13.055Z,1521496753.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:13.851Z,1521496753.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:14.648Z,1521496754.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:15.059Z,1521496755.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:15.856Z,1521496755.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:16.656Z,1521496756.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:17.075Z,1521496757.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:17.871Z,1521496757.871 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:18.668Z,1521496758.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:19.111Z,1521496759.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:19.907Z,1521496759.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:20.703Z,1521496760.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:21.307Z,1521496761.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:22.103Z,1521496762.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:22.901Z,1521496762.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:23.591Z,1521496763.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:24.387Z,1521496764.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:25.184Z,1521496765.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:25.595Z,1521496765.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:26.391Z,1521496766.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:27.111Z,1521496767.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:27.907Z,1521496767.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:28.703Z,1521496768.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:29.107Z,1521496769.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:29.903Z,1521496769.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:30.699Z,1521496770.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:31.115Z,1521496771.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:31.911Z,1521496771.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:32.708Z,1521496772.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:33.115Z,1521496773.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:33.911Z,1521496773.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:34.707Z,1521496774.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:35.303Z,1521496775.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:36.100Z,1521496776.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:36.896Z,1521496776.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:37.595Z,1521496777.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:38.391Z,1521496778.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:39.188Z,1521496779.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T21:59:39.595Z,1521496779.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:03.307Z,1521496803.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:04.105Z,1521496804.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:04.899Z,1521496804.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:05.595Z,1521496805.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:06.391Z,1521496806.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:07.188Z,1521496807.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:07.595Z,1521496807.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:08.391Z,1521496808.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:09.095Z,1521496809.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:09.891Z,1521496809.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:10.687Z,1521496810.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:11.091Z,1521496811.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:11.887Z,1521496811.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:12.694Z,1521496812.694 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:13.103Z,1521496813.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:13.899Z,1521496813.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:14.705Z,1521496814.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:15.131Z,1521496815.131 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:15.927Z,1521496815.927 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:16.320Z,1521496816.320 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:00:16.320Z,1521496816.320 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:00:16.321Z,1521496816.321 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:00:16.321Z,1521496816.321 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:00:16.703Z,1521496816.703 [Default:CheckIn:D] Stopped
2018-03-19T22:00:16.703Z,1521496816.703 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:00:16.723Z,1521496816.723 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:17.082Z,1521496817.082 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 68.006160 min 
2018-03-19T22:00:17.084Z,1521496817.084 [Default:CheckIn:E] Stopped
2018-03-19T22:00:17.084Z,1521496817.084 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:00:17.084Z,1521496817.084 [Default:CheckIn] Stopped
2018-03-19T22:00:17.085Z,1521496817.085 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:00:17.085Z,1521496817.085 [Default:CheckIn](INFO): Running loop #12
2018-03-19T22:00:17.085Z,1521496817.085 [Default:CheckIn] Running Loop=12
2018-03-19T22:00:17.085Z,1521496817.085 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:00:17.085Z,1521496817.085 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:00:17.307Z,1521496817.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:18.103Z,1521496818.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:18.899Z,1521496818.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:19.595Z,1521496819.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:20.391Z,1521496820.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:20.396Z,1521496820.396 [NAL9602](INFO): Powering up
2018-03-19T22:00:21.188Z,1521496821.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:21.611Z,1521496821.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:22.415Z,1521496822.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:23.051Z,1521496823.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:23.847Z,1521496823.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:24.644Z,1521496824.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:25.063Z,1521496825.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:25.859Z,1521496825.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:26.656Z,1521496826.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:27.067Z,1521496827.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:27.865Z,1521496827.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:28.659Z,1521496828.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:29.123Z,1521496829.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:29.919Z,1521496829.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:30.715Z,1521496830.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:31.307Z,1521496831.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:31.540Z,1521496831.540 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:00:32.103Z,1521496832.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:32.900Z,1521496832.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:33.595Z,1521496833.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:34.391Z,1521496834.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:35.188Z,1521496835.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:35.619Z,1521496835.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:36.415Z,1521496836.415 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:37.047Z,1521496837.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:37.843Z,1521496837.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:38.640Z,1521496838.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:39.055Z,1521496839.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:39.851Z,1521496839.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:40.648Z,1521496840.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:41.071Z,1521496841.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:41.867Z,1521496841.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:42.663Z,1521496842.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:43.127Z,1521496843.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:43.923Z,1521496843.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:44.719Z,1521496844.719 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:45.303Z,1521496845.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:46.099Z,1521496846.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:46.896Z,1521496846.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:47.541Z,1521496847.541 [NAL9602](INFO): SBD MO Status=0, MOMSN=4871, MT Status=0, MTMSN=0
2018-03-19T22:00:47.541Z,1521496847.541 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:00:47.599Z,1521496847.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:48.395Z,1521496848.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:49.192Z,1521496849.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:49.623Z,1521496849.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:50.419Z,1521496850.419 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:51.053Z,1521496851.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:51.847Z,1521496851.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:52.650Z,1521496852.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:53.055Z,1521496853.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:53.851Z,1521496853.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:54.648Z,1521496854.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:55.055Z,1521496855.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:55.851Z,1521496855.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:56.647Z,1521496856.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:57.107Z,1521496857.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:57.903Z,1521496857.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:58.702Z,1521496858.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:00:59.295Z,1521496859.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:00.092Z,1521496860.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:00.887Z,1521496860.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:01.143Z,1521496861.143 [NAL9602](INFO): GPS fix at 20180319T220100: (36.802268, -121.786825)
2018-03-19T22:01:01.259Z,1521496861.259 [UniversalFixResidualReporter](INFO): Fix residual: 99.7 %DT, over the last 1493.2 m. Residual distance 1488.8 m at bearing 137.0 degrees. Fix at (36.8023, -121.7868) with 4.4 m made good.
2018-03-19T22:01:01.260Z,1521496861.260 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:01:01.261Z,1521496861.261 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:01:01.599Z,1521496861.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:02.395Z,1521496862.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:03.193Z,1521496863.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:03.599Z,1521496863.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:04.395Z,1521496864.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:05.043Z,1521496865.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:05.839Z,1521496865.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:05.872Z,1521496865.872 [DataOverHttps](INFO): Sending 71 bytes from file Logs/20180319T193343/Courier0104.lzma
2018-03-19T22:01:06.636Z,1521496866.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:06.666Z,1521496866.666 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0104.lzma.bak
2018-03-19T22:01:06.667Z,1521496866.667 [DataOverHttps](INFO): SBD MOMSN=8138677
2018-03-19T22:01:07.047Z,1521496867.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:07.843Z,1521496867.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:08.640Z,1521496868.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:09.060Z,1521496869.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:09.855Z,1521496869.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:10.651Z,1521496870.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:11.103Z,1521496871.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:11.899Z,1521496871.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:12.695Z,1521496872.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:13.315Z,1521496873.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:14.111Z,1521496874.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:14.907Z,1521496874.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:15.589Z,1521496875.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:15.859Z,1521496875.859 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0105.lzma
2018-03-19T22:01:16.383Z,1521496876.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:16.639Z,1521496876.639 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0105.lzma.bak
2018-03-19T22:01:16.640Z,1521496876.640 [DataOverHttps](INFO): SBD MOMSN=8138680
2018-03-19T22:01:17.101Z,1521496877.101 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:01:17.101Z,1521496877.101 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:01:17.101Z,1521496877.101 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:01:17.180Z,1521496877.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:17.591Z,1521496877.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:18.387Z,1521496878.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:19.043Z,1521496879.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:19.839Z,1521496879.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:20.637Z,1521496880.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:21.063Z,1521496881.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:21.859Z,1521496881.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:22.664Z,1521496882.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:23.071Z,1521496883.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:23.899Z,1521496883.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:24.696Z,1521496884.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:25.107Z,1521496885.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:25.903Z,1521496885.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:26.699Z,1521496886.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:27.299Z,1521496887.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:28.095Z,1521496888.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:28.894Z,1521496888.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:29.583Z,1521496889.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:30.379Z,1521496890.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:31.176Z,1521496891.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:31.587Z,1521496891.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:32.383Z,1521496892.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:33.043Z,1521496893.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:33.839Z,1521496893.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:34.636Z,1521496894.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:35.047Z,1521496895.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:35.843Z,1521496895.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:36.180Z,1521496896.180 [NAL9602](INFO): Powering down
2018-03-19T22:01:36.640Z,1521496896.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:37.067Z,1521496897.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:37.863Z,1521496897.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:38.659Z,1521496898.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:39.123Z,1521496899.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:39.919Z,1521496899.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:40.715Z,1521496900.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:41.298Z,1521496901.298 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:42.091Z,1521496902.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:42.887Z,1521496902.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:43.587Z,1521496903.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:44.383Z,1521496904.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:45.180Z,1521496905.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:45.587Z,1521496905.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:46.385Z,1521496906.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:47.047Z,1521496907.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:47.867Z,1521496907.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:48.664Z,1521496908.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:49.071Z,1521496909.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:49.867Z,1521496909.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:50.664Z,1521496910.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:51.071Z,1521496911.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:51.867Z,1521496911.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:52.663Z,1521496912.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:53.111Z,1521496913.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:53.907Z,1521496913.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:54.703Z,1521496914.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:55.295Z,1521496915.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:56.094Z,1521496916.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:56.891Z,1521496916.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:57.587Z,1521496917.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:58.383Z,1521496918.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:59.180Z,1521496919.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:01:59.587Z,1521496919.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:00.383Z,1521496920.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:01.043Z,1521496921.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:01.839Z,1521496921.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:02.636Z,1521496922.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:03.063Z,1521496923.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:03.860Z,1521496923.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:04.656Z,1521496924.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:05.063Z,1521496925.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:05.867Z,1521496925.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:06.663Z,1521496926.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:07.135Z,1521496927.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:07.931Z,1521496927.931 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:08.727Z,1521496928.727 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:09.299Z,1521496929.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:10.097Z,1521496930.097 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:10.891Z,1521496930.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:11.583Z,1521496931.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:12.379Z,1521496932.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:13.178Z,1521496933.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:13.595Z,1521496933.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:14.391Z,1521496934.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:15.063Z,1521496935.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:15.859Z,1521496935.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:16.656Z,1521496936.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:17.063Z,1521496937.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:17.859Z,1521496937.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:18.656Z,1521496938.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:19.124Z,1521496939.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:19.919Z,1521496939.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:20.716Z,1521496940.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:21.123Z,1521496941.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:21.919Z,1521496941.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:22.715Z,1521496942.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:23.303Z,1521496943.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:24.099Z,1521496944.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:24.896Z,1521496944.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:25.587Z,1521496945.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:26.383Z,1521496946.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:27.182Z,1521496947.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:27.595Z,1521496947.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:28.391Z,1521496948.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:29.047Z,1521496949.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:29.843Z,1521496949.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:30.640Z,1521496950.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:31.047Z,1521496951.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:31.843Z,1521496951.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:32.640Z,1521496952.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:33.055Z,1521496953.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:33.851Z,1521496953.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:34.647Z,1521496954.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:35.111Z,1521496955.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:35.907Z,1521496955.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:36.703Z,1521496956.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:37.331Z,1521496957.331 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:38.127Z,1521496958.127 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:38.923Z,1521496958.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:39.587Z,1521496959.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:40.383Z,1521496960.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:41.180Z,1521496961.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:41.587Z,1521496961.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:42.383Z,1521496962.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:43.039Z,1521496963.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:43.835Z,1521496963.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:44.632Z,1521496964.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:45.051Z,1521496965.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:45.847Z,1521496965.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:46.644Z,1521496966.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:47.063Z,1521496967.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:47.859Z,1521496967.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:48.656Z,1521496968.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:49.123Z,1521496969.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:49.919Z,1521496969.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:50.715Z,1521496970.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:51.347Z,1521496971.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:52.143Z,1521496972.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:52.939Z,1521496972.939 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:53.587Z,1521496973.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:54.383Z,1521496974.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:55.180Z,1521496975.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:55.591Z,1521496975.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:56.387Z,1521496976.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:57.039Z,1521496977.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:57.835Z,1521496977.835 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:58.632Z,1521496978.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:59.047Z,1521496979.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:02:59.843Z,1521496979.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:00.644Z,1521496980.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:01.059Z,1521496981.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:01.855Z,1521496981.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:02.651Z,1521496982.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:03.111Z,1521496983.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:03.907Z,1521496983.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:04.703Z,1521496984.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:05.303Z,1521496985.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:06.099Z,1521496986.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:06.895Z,1521496986.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:07.591Z,1521496987.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:08.387Z,1521496988.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:09.184Z,1521496989.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:09.591Z,1521496989.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:10.387Z,1521496990.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:11.043Z,1521496991.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:11.839Z,1521496991.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:12.645Z,1521496992.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:13.059Z,1521496993.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:13.857Z,1521496993.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:14.652Z,1521496994.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:15.059Z,1521496995.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:15.855Z,1521496995.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:16.651Z,1521496996.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:17.107Z,1521496997.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:17.903Z,1521496997.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:18.700Z,1521496998.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:19.296Z,1521496999.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:20.091Z,1521497000.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:20.887Z,1521497000.887 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:21.591Z,1521497001.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:22.387Z,1521497002.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:23.184Z,1521497003.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:23.591Z,1521497003.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:24.387Z,1521497004.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:25.044Z,1521497005.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:25.840Z,1521497005.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:26.636Z,1521497006.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:27.052Z,1521497007.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:27.848Z,1521497007.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:28.644Z,1521497008.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:29.063Z,1521497009.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:29.859Z,1521497009.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:30.655Z,1521497010.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:31.111Z,1521497011.111 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:31.907Z,1521497011.907 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:32.703Z,1521497012.703 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:33.299Z,1521497013.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:34.095Z,1521497014.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:34.891Z,1521497014.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:35.587Z,1521497015.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:36.383Z,1521497016.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:37.180Z,1521497017.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:37.591Z,1521497017.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:38.387Z,1521497018.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:39.045Z,1521497019.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:39.840Z,1521497019.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:40.636Z,1521497020.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:41.059Z,1521497021.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:41.855Z,1521497021.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:42.652Z,1521497022.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:43.063Z,1521497023.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:43.860Z,1521497023.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:44.656Z,1521497024.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:45.107Z,1521497025.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:45.903Z,1521497025.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:46.699Z,1521497026.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:47.299Z,1521497027.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:48.098Z,1521497028.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:48.891Z,1521497028.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:49.595Z,1521497029.595 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:50.391Z,1521497030.391 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:51.192Z,1521497031.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:51.599Z,1521497031.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:52.395Z,1521497032.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:53.044Z,1521497033.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:53.840Z,1521497033.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:54.636Z,1521497034.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:55.051Z,1521497035.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:55.848Z,1521497035.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:56.293Z,1521497036.293 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T22:03:56.644Z,1521497036.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:57.103Z,1521497037.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:57.899Z,1521497037.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:58.696Z,1521497038.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:59.115Z,1521497039.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:03:59.911Z,1521497039.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:00.707Z,1521497040.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:01.303Z,1521497041.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:02.101Z,1521497042.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:02.895Z,1521497042.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:03.591Z,1521497043.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:04.387Z,1521497044.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:05.184Z,1521497045.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:05.591Z,1521497045.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:06.387Z,1521497046.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:07.103Z,1521497047.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:07.899Z,1521497047.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:08.695Z,1521497048.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:09.099Z,1521497049.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:09.895Z,1521497049.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:10.691Z,1521497050.691 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:11.099Z,1521497051.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:11.895Z,1521497051.895 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:12.692Z,1521497052.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:13.107Z,1521497053.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:13.903Z,1521497053.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:14.699Z,1521497054.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:15.299Z,1521497055.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:16.098Z,1521497056.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:16.892Z,1521497056.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:17.587Z,1521497057.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:18.383Z,1521497058.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:19.180Z,1521497059.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:19.591Z,1521497059.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:20.387Z,1521497060.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:21.043Z,1521497061.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:21.852Z,1521497061.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:22.648Z,1521497062.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:23.063Z,1521497063.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:23.860Z,1521497063.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:24.656Z,1521497064.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:25.063Z,1521497065.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:25.859Z,1521497065.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:26.656Z,1521497066.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:27.115Z,1521497067.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:27.911Z,1521497067.911 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:28.707Z,1521497068.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:29.299Z,1521497069.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:30.095Z,1521497070.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:30.892Z,1521497070.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:31.688Z,1521497071.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:32.483Z,1521497072.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:33.281Z,1521497073.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:33.687Z,1521497073.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:34.483Z,1521497074.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:35.043Z,1521497075.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:35.839Z,1521497075.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:36.636Z,1521497076.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:37.047Z,1521497077.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:37.843Z,1521497077.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:38.640Z,1521497078.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:39.059Z,1521497079.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:39.855Z,1521497079.855 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:40.651Z,1521497080.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:41.115Z,1521497081.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:41.913Z,1521497081.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:42.707Z,1521497082.707 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:43.299Z,1521497083.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:44.096Z,1521497084.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:44.891Z,1521497084.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:45.587Z,1521497085.587 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:46.383Z,1521497086.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:47.180Z,1521497087.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:47.631Z,1521497087.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:48.427Z,1521497088.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:49.043Z,1521497089.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:49.841Z,1521497089.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:50.636Z,1521497090.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:51.047Z,1521497091.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:51.843Z,1521497091.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:52.640Z,1521497092.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:53.067Z,1521497093.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:53.863Z,1521497093.863 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:54.660Z,1521497094.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:55.123Z,1521497095.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:55.920Z,1521497095.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:56.715Z,1521497096.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:57.299Z,1521497097.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:58.095Z,1521497098.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:58.891Z,1521497098.891 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:04:59.647Z,1521497099.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:00.443Z,1521497100.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:01.239Z,1521497101.239 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:01.643Z,1521497101.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:02.439Z,1521497102.439 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:03.043Z,1521497103.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:03.839Z,1521497103.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:04.636Z,1521497104.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:05.047Z,1521497105.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:05.843Z,1521497105.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:06.640Z,1521497106.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:07.063Z,1521497107.063 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:07.859Z,1521497107.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:08.655Z,1521497108.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:09.123Z,1521497109.123 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:09.919Z,1521497109.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:10.715Z,1521497110.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:11.312Z,1521497111.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:12.108Z,1521497112.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:12.903Z,1521497112.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:13.611Z,1521497113.611 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:14.407Z,1521497114.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:15.204Z,1521497115.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:15.631Z,1521497115.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:16.427Z,1521497116.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:17.051Z,1521497117.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:17.849Z,1521497117.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:18.644Z,1521497118.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:19.051Z,1521497119.051 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:19.848Z,1521497119.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:20.645Z,1521497120.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:21.071Z,1521497121.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:21.867Z,1521497121.867 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:22.663Z,1521497122.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:23.119Z,1521497123.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:23.915Z,1521497123.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:24.711Z,1521497124.711 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:25.311Z,1521497125.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:26.107Z,1521497126.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:26.903Z,1521497126.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:27.583Z,1521497127.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:28.381Z,1521497128.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:29.176Z,1521497129.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:29.583Z,1521497129.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:30.379Z,1521497130.379 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:31.035Z,1521497131.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:31.831Z,1521497131.831 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:32.636Z,1521497132.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:33.047Z,1521497133.047 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:33.843Z,1521497133.843 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:34.647Z,1521497134.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:35.056Z,1521497135.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:35.851Z,1521497135.851 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:36.647Z,1521497136.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:37.103Z,1521497137.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:37.899Z,1521497137.899 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:38.695Z,1521497138.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:39.323Z,1521497139.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:40.119Z,1521497140.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:40.915Z,1521497140.915 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:41.579Z,1521497141.579 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:42.375Z,1521497142.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:43.172Z,1521497143.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:05:43.583Z,1521497143.583 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:06:17.693Z,1521497177.693 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:06:17.693Z,1521497177.693 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:06:17.693Z,1521497177.693 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:06:17.694Z,1521497177.694 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:06:18.095Z,1521497178.095 [Default:CheckIn:D] Stopped
2018-03-19T22:06:18.095Z,1521497178.095 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:06:18.508Z,1521497178.508 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 74.029704 min 
2018-03-19T22:06:18.508Z,1521497178.508 [Default:CheckIn:E] Stopped
2018-03-19T22:06:18.508Z,1521497178.508 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:06:18.509Z,1521497178.509 [Default:CheckIn] Stopped
2018-03-19T22:06:18.509Z,1521497178.509 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:06:18.509Z,1521497178.509 [Default:CheckIn](INFO): Running loop #13
2018-03-19T22:06:18.509Z,1521497178.509 [Default:CheckIn] Running Loop=13
2018-03-19T22:06:18.509Z,1521497178.509 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:06:18.509Z,1521497178.509 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:06:22.285Z,1521497182.285 [NAL9602](INFO): Powering up
2018-03-19T22:06:26.383Z,1521497186.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:06:27.035Z,1521497187.035 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:06:33.464Z,1521497193.464 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:06:48.272Z,1521497208.272 [NAL9602](INFO): SBD MO Status=0, MOMSN=4872, MT Status=0, MTMSN=0
2018-03-19T22:06:48.272Z,1521497208.272 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:07:01.071Z,1521497221.071 [NAL9602](INFO): GPS fix at 20180319T220700: (36.802278, -121.786825)
2018-03-19T22:07:01.137Z,1521497221.137 [UniversalFixResidualReporter](INFO): Fix residual: 100.1 %DT, over the last 1487.8 m. Residual distance 1488.6 m at bearing 137.0 degrees. Fix at (36.8023, -121.7868) with 1.1 m made good.
2018-03-19T22:07:01.138Z,1521497221.138 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:07:01.138Z,1521497221.138 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:07:06.129Z,1521497226.129 [DataOverHttps](INFO): Sending 71 bytes from file Logs/20180319T193343/Courier0108.lzma
2018-03-19T22:07:06.927Z,1521497226.927 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0108.lzma.bak
2018-03-19T22:07:06.928Z,1521497226.928 [DataOverHttps](INFO): SBD MOMSN=8138762
2018-03-19T22:07:15.970Z,1521497235.970 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20180319T193343/Express0109.lzma
2018-03-19T22:07:16.759Z,1521497236.759 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0109.lzma.bak
2018-03-19T22:07:16.760Z,1521497236.760 [DataOverHttps](INFO): SBD MOMSN=8138765
2018-03-19T22:07:17.228Z,1521497237.228 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:07:17.228Z,1521497237.228 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:07:17.228Z,1521497237.228 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:07:35.812Z,1521497255.812 [NAL9602](INFO): Powering down
2018-03-19T22:08:32.383Z,1521497312.383 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:08:33.039Z,1521497313.039 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:12:17.665Z,1521497537.665 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:12:17.666Z,1521497537.666 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:12:17.666Z,1521497537.666 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:12:17.694Z,1521497537.694 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:12:18.096Z,1521497538.096 [Default:CheckIn:D] Stopped
2018-03-19T22:12:18.096Z,1521497538.096 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:12:18.468Z,1521497538.468 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 80.029728 min 
2018-03-19T22:12:18.468Z,1521497538.468 [Default:CheckIn:E] Stopped
2018-03-19T22:12:18.468Z,1521497538.468 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:12:18.468Z,1521497538.468 [Default:CheckIn] Stopped
2018-03-19T22:12:18.469Z,1521497538.469 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:12:18.469Z,1521497538.469 [Default:CheckIn](INFO): Running loop #14
2018-03-19T22:12:18.469Z,1521497538.469 [Default:CheckIn] Running Loop=14
2018-03-19T22:12:18.469Z,1521497538.469 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:12:18.469Z,1521497538.469 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:12:23.104Z,1521497543.104 [NAL9602](INFO): Powering up
2018-03-19T22:12:30.407Z,1521497550.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:12:31.043Z,1521497551.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:12:34.024Z,1521497554.024 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:12:50.829Z,1521497570.829 [NAL9602](INFO): SBD MO Status=0, MOMSN=4873, MT Status=0, MTMSN=0
2018-03-19T22:12:50.829Z,1521497570.829 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:13:01.227Z,1521497581.227 [NAL9602](INFO): GPS fix at 20180319T221300: (36.802299, -121.786836)
2018-03-19T22:13:01.307Z,1521497581.307 [UniversalFixResidualReporter](INFO): Fix residual: 100.2 %DT, over the last 1488.9 m. Residual distance 1491.3 m at bearing 137.0 degrees. Fix at (36.8023, -121.7868) with 2.5 m made good.
2018-03-19T22:13:01.308Z,1521497581.308 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:13:01.308Z,1521497581.308 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:13:07.456Z,1521497587.456 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0112.lzma
2018-03-19T22:13:08.255Z,1521497588.255 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0112.lzma.bak
2018-03-19T22:13:08.256Z,1521497588.256 [DataOverHttps](INFO): SBD MOMSN=8138801
2018-03-19T22:13:17.402Z,1521497597.402 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20180319T193343/Express0113.lzma
2018-03-19T22:13:18.203Z,1521497598.203 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0113.lzma.bak
2018-03-19T22:13:18.203Z,1521497598.203 [DataOverHttps](INFO): SBD MOMSN=8138804
2018-03-19T22:13:18.730Z,1521497598.730 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:13:18.730Z,1521497598.730 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:13:18.730Z,1521497598.730 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:13:33.568Z,1521497613.568 [NAL9602](INFO): Powering down
2018-03-19T22:13:56.452Z,1521497636.452 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T22:16:28.375Z,1521497788.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:16:29.031Z,1521497789.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:18:19.340Z,1521497899.340 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:18:19.340Z,1521497899.340 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:18:19.341Z,1521497899.341 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:18:19.341Z,1521497899.341 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:18:19.724Z,1521497899.724 [Default:CheckIn:D] Stopped
2018-03-19T22:18:19.724Z,1521497899.724 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:18:20.130Z,1521497900.130 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 86.056852 min 
2018-03-19T22:18:20.131Z,1521497900.131 [Default:CheckIn:E] Stopped
2018-03-19T22:18:20.131Z,1521497900.131 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:18:20.131Z,1521497900.131 [Default:CheckIn] Stopped
2018-03-19T22:18:20.131Z,1521497900.131 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:18:20.131Z,1521497900.131 [Default:CheckIn](INFO): Running loop #15
2018-03-19T22:18:20.131Z,1521497900.131 [Default:CheckIn] Running Loop=15
2018-03-19T22:18:20.131Z,1521497900.131 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:18:20.131Z,1521497900.131 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:18:25.272Z,1521497905.272 [NAL9602](INFO): Powering up
2018-03-19T22:18:34.375Z,1521497914.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:18:35.031Z,1521497915.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:18:36.408Z,1521497916.408 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:18:55.209Z,1521497935.209 [NAL9602](INFO): SBD MO Status=0, MOMSN=4874, MT Status=0, MTMSN=0
2018-03-19T22:18:55.209Z,1521497935.209 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:19:01.227Z,1521497941.227 [NAL9602](INFO): GPS fix at 20180319T221900: (36.802248, -121.786812)
2018-03-19T22:19:01.295Z,1521497941.295 [UniversalFixResidualReporter](INFO): Fix residual: 99.6 %DT, over the last 1488.1 m. Residual distance 1482.5 m at bearing 136.6 degrees. Fix at (36.8022, -121.7868) with 6.0 m made good.
2018-03-19T22:19:01.295Z,1521497941.295 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:19:01.296Z,1521497941.296 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:19:05.775Z,1521497945.775 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0116.lzma
2018-03-19T22:19:06.576Z,1521497946.576 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0116.lzma.bak
2018-03-19T22:19:06.576Z,1521497946.576 [DataOverHttps](INFO): SBD MOMSN=8138814
2018-03-19T22:19:15.717Z,1521497955.717 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20180319T193343/Express0117.lzma
2018-03-19T22:19:16.511Z,1521497956.511 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0117.lzma.bak
2018-03-19T22:19:16.512Z,1521497956.512 [DataOverHttps](INFO): SBD MOMSN=8138817
2018-03-19T22:19:16.976Z,1521497956.976 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:19:16.977Z,1521497956.977 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:19:16.977Z,1521497956.977 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:19:36.039Z,1521497976.039 [NAL9602](INFO): Powering down
2018-03-19T22:20:26.375Z,1521498026.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:20:27.071Z,1521498027.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:23:56.812Z,1521498236.812 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T22:24:17.609Z,1521498257.609 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:24:17.609Z,1521498257.609 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:24:17.609Z,1521498257.609 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:24:17.610Z,1521498257.610 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:24:18.011Z,1521498258.011 [Default:CheckIn:D] Stopped
2018-03-19T22:24:18.011Z,1521498258.011 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:24:18.418Z,1521498258.418 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 92.028312 min 
2018-03-19T22:24:18.419Z,1521498258.419 [Default:CheckIn:E] Stopped
2018-03-19T22:24:18.419Z,1521498258.419 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:24:18.419Z,1521498258.419 [Default:CheckIn] Stopped
2018-03-19T22:24:18.419Z,1521498258.419 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:24:18.419Z,1521498258.419 [Default:CheckIn](INFO): Running loop #16
2018-03-19T22:24:18.419Z,1521498258.419 [Default:CheckIn] Running Loop=16
2018-03-19T22:24:18.419Z,1521498258.419 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:24:18.420Z,1521498258.420 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:24:22.372Z,1521498262.372 [NAL9602](INFO): Powering up
2018-03-19T22:24:24.371Z,1521498264.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:24:25.019Z,1521498265.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:24:33.536Z,1521498273.536 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:24:51.937Z,1521498291.937 [NAL9602](INFO): SBD MO Status=0, MOMSN=4875, MT Status=0, MTMSN=0
2018-03-19T22:24:51.937Z,1521498291.937 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:25:31.739Z,1521498331.739 [NAL9602](INFO): GPS fix at 20180319T222530: (36.802318, -121.786689)
2018-03-19T22:25:31.793Z,1521498331.793 [UniversalFixResidualReporter](INFO): Fix residual: 19.6 %DT, over the last 1622.4 m. Residual distance 318.6 m at bearing 178.9 degrees. Fix at (36.8023, -121.7867) with 13.4 m made good.
2018-03-19T22:25:31.794Z,1521498331.794 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:25:31.795Z,1521498331.795 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:25:36.785Z,1521498336.785 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0120.lzma
2018-03-19T22:25:37.587Z,1521498337.587 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0120.lzma.bak
2018-03-19T22:25:37.588Z,1521498337.588 [DataOverHttps](INFO): SBD MOMSN=8138875
2018-03-19T22:25:46.977Z,1521498346.977 [DataOverHttps](INFO): Sending 186 bytes from file Logs/20180319T193343/Express0121.lzma
2018-03-19T22:25:47.775Z,1521498347.775 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0121.lzma.bak
2018-03-19T22:25:47.776Z,1521498347.776 [DataOverHttps](INFO): SBD MOMSN=8138878
2018-03-19T22:25:48.263Z,1521498348.263 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:25:48.263Z,1521498348.263 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:25:48.263Z,1521498348.263 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:26:07.224Z,1521498367.224 [NAL9602](INFO): Powering down
2018-03-19T22:26:30.371Z,1521498390.371 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:26:31.023Z,1521498391.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:28:22.369Z,1521498502.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:28:23.059Z,1521498503.059 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:30:28.375Z,1521498628.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:30:29.023Z,1521498629.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:30:48.779Z,1521498648.779 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:30:48.779Z,1521498648.779 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:30:48.779Z,1521498648.779 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:30:48.779Z,1521498648.779 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:30:49.119Z,1521498649.119 [Default:CheckIn:D] Stopped
2018-03-19T22:30:49.119Z,1521498649.119 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:30:49.514Z,1521498649.514 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 98.546761 min 
2018-03-19T22:30:49.514Z,1521498649.514 [Default:CheckIn:E] Stopped
2018-03-19T22:30:49.515Z,1521498649.515 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:30:49.515Z,1521498649.515 [Default:CheckIn] Stopped
2018-03-19T22:30:49.515Z,1521498649.515 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:30:49.515Z,1521498649.515 [Default:CheckIn](INFO): Running loop #17
2018-03-19T22:30:49.515Z,1521498649.515 [Default:CheckIn] Running Loop=17
2018-03-19T22:30:49.515Z,1521498649.515 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:30:49.515Z,1521498649.515 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:30:52.792Z,1521498652.792 [NAL9602](INFO): Powering up
2018-03-19T22:31:03.936Z,1521498663.936 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:31:59.325Z,1521498719.325 [NAL9602](INFO): SBD MO Status=2, MOMSN=4876, MT Status=2, MTMSN=0
2018-03-19T22:31:59.325Z,1521498719.325 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T22:32:20.358Z,1521498740.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:32:21.027Z,1521498741.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:32:56.797Z,1521498776.797 [NAL9602](INFO): SBD MO Status=0, MOMSN=4876, MT Status=0, MTMSN=0
2018-03-19T22:32:56.797Z,1521498776.797 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:32:57.999Z,1521498777.999 [NAL9602](INFO): GPS fix at 20180319T223257: (36.802322, -121.786779)
2018-03-19T22:32:58.068Z,1521498778.068 [UniversalFixResidualReporter](INFO): Fix residual: 98.7 %DT, over the last 1744.7 m. Residual distance 1722.6 m at bearing -36.0 degrees. Fix at (36.8023, -121.7868) with 8.0 m made good.
2018-03-19T22:32:58.069Z,1521498778.069 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:32:58.070Z,1521498778.070 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:33:02.560Z,1521498782.560 [DataOverHttps](INFO): Sending 73 bytes from file Logs/20180319T193343/Courier0124.lzma
2018-03-19T22:33:03.327Z,1521498783.327 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0124.lzma.bak
2018-03-19T22:33:03.328Z,1521498783.328 [DataOverHttps](INFO): SBD MOMSN=8138887
2018-03-19T22:33:12.376Z,1521498792.376 [DataOverHttps](INFO): Sending 168 bytes from file Logs/20180319T193343/Express0125.lzma
2018-03-19T22:33:13.179Z,1521498793.179 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0125.lzma.bak
2018-03-19T22:33:13.179Z,1521498793.179 [DataOverHttps](INFO): SBD MOMSN=8138890
2018-03-19T22:33:13.648Z,1521498793.648 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:33:13.648Z,1521498793.648 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:33:13.649Z,1521498793.649 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:33:32.708Z,1521498812.708 [NAL9602](INFO): Powering down
2018-03-19T22:33:57.241Z,1521498837.241 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T22:34:12.359Z,1521498852.359 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:34:13.015Z,1521498853.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:36:18.368Z,1521498978.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:36:19.019Z,1521498979.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:38:10.355Z,1521499090.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:38:11.019Z,1521499091.019 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:38:14.150Z,1521499094.150 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:38:14.151Z,1521499094.151 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:38:14.151Z,1521499094.151 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:38:14.155Z,1521499094.155 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:38:14.537Z,1521499094.537 [Default:CheckIn:D] Stopped
2018-03-19T22:38:14.537Z,1521499094.537 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:38:14.941Z,1521499094.941 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 105.970402 min 
2018-03-19T22:38:14.941Z,1521499094.941 [Default:CheckIn:E] Stopped
2018-03-19T22:38:14.941Z,1521499094.941 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:38:14.941Z,1521499094.941 [Default:CheckIn] Stopped
2018-03-19T22:38:14.941Z,1521499094.941 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:38:14.941Z,1521499094.941 [Default:CheckIn](INFO): Running loop #18
2018-03-19T22:38:14.941Z,1521499094.941 [Default:CheckIn] Running Loop=18
2018-03-19T22:38:14.942Z,1521499094.942 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:38:14.942Z,1521499094.942 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:38:18.221Z,1521499098.221 [NAL9602](INFO): Powering up
2018-03-19T22:38:29.396Z,1521499109.396 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:38:44.997Z,1521499124.997 [NAL9602](INFO): SBD MO Status=0, MOMSN=4877, MT Status=0, MTMSN=0
2018-03-19T22:38:44.997Z,1521499124.997 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:39:00.999Z,1521499140.999 [NAL9602](INFO): GPS fix at 20180319T223900: (36.803874, -121.785629)
2018-03-19T22:39:01.075Z,1521499141.075 [UniversalFixResidualReporter](INFO): Fix residual: 30.7 %DT, over the last 1411.5 m. Residual distance 433.3 m at bearing -50.2 degrees. Fix at (36.8039, -121.7856) with 200.7 m made good.
2018-03-19T22:39:01.075Z,1521499141.075 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:39:01.076Z,1521499141.076 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:39:05.583Z,1521499145.583 [DataOverHttps](INFO): Sending 89 bytes from file Logs/20180319T193343/Courier0128.lzma
2018-03-19T22:39:06.367Z,1521499146.367 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0128.lzma.bak
2018-03-19T22:39:06.368Z,1521499146.368 [DataOverHttps](INFO): SBD MOMSN=8138970
2018-03-19T22:39:15.742Z,1521499155.742 [DataOverHttps](INFO): Sending 178 bytes from file Logs/20180319T193343/Express0129.lzma
2018-03-19T22:39:16.539Z,1521499156.539 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0129.lzma.bak
2018-03-19T22:39:16.540Z,1521499156.540 [DataOverHttps](INFO): SBD MOMSN=8138973
2018-03-19T22:39:17.006Z,1521499157.006 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:39:17.006Z,1521499157.006 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:39:17.006Z,1521499157.006 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:39:35.656Z,1521499175.656 [NAL9602](INFO): Powering down
2018-03-19T22:40:16.355Z,1521499216.355 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:40:17.015Z,1521499217.015 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:42:08.351Z,1521499328.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:42:09.011Z,1521499329.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:43:57.274Z,1521499437.274 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T22:44:00.356Z,1521499440.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:44:01.007Z,1521499441.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:44:17.608Z,1521499457.608 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:44:17.608Z,1521499457.608 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:44:17.608Z,1521499457.608 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:44:17.609Z,1521499457.609 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:44:18.016Z,1521499458.016 [Default:CheckIn:D] Stopped
2018-03-19T22:44:18.016Z,1521499458.016 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:44:18.416Z,1521499458.416 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 112.028394 min 
2018-03-19T22:44:18.416Z,1521499458.416 [Default:CheckIn:E] Stopped
2018-03-19T22:44:18.416Z,1521499458.416 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:44:18.416Z,1521499458.416 [Default:CheckIn] Stopped
2018-03-19T22:44:18.416Z,1521499458.416 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:44:18.416Z,1521499458.416 [Default:CheckIn](INFO): Running loop #19
2018-03-19T22:44:18.417Z,1521499458.417 [Default:CheckIn] Running Loop=19
2018-03-19T22:44:18.417Z,1521499458.417 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:44:18.417Z,1521499458.417 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:44:22.268Z,1521499462.268 [NAL9602](INFO): Powering up
2018-03-19T22:44:33.452Z,1521499473.452 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:45:21.982Z,1521499521.982 [NAL9602](INFO): SBD MO Status=0, MOMSN=4878, MT Status=0, MTMSN=0
2018-03-19T22:45:21.982Z,1521499521.982 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:45:22.912Z,1521499522.912 [NAL9602](INFO): GPS fix at 20180319T224522: (36.806635, -121.790147)
2018-03-19T22:45:22.977Z,1521499522.977 [UniversalFixResidualReporter](INFO): Fix residual: 83.2 %DT, over the last 1482.5 m. Residual distance 1233.2 m at bearing 98.8 degrees. Fix at (36.8066, -121.7901) with 505.9 m made good.
2018-03-19T22:45:22.978Z,1521499522.978 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:45:22.978Z,1521499522.978 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:45:27.885Z,1521499527.885 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0132.lzma
2018-03-19T22:45:28.684Z,1521499528.684 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0132.lzma.bak
2018-03-19T22:45:28.684Z,1521499528.684 [DataOverHttps](INFO): SBD MOMSN=8139087
2018-03-19T22:45:39.401Z,1521499539.401 [DataOverHttps](INFO): Sending 183 bytes from file Logs/20180319T193343/Express0133.lzma
2018-03-19T22:45:40.192Z,1521499540.192 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0133.lzma.bak
2018-03-19T22:45:40.192Z,1521499540.192 [DataOverHttps](INFO): SBD MOMSN=8139090
2018-03-19T22:45:40.757Z,1521499540.757 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:45:40.757Z,1521499540.757 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:45:40.757Z,1521499540.757 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:45:52.343Z,1521499552.343 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:45:53.003Z,1521499553.003 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:45:57.588Z,1521499557.588 [NAL9602](INFO): Powering down
2018-03-19T22:47:44.347Z,1521499664.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:47:45.011Z,1521499665.011 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:49:36.351Z,1521499776.351 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:49:37.027Z,1521499777.027 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:50:41.324Z,1521499841.324 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:50:41.324Z,1521499841.325 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:50:41.325Z,1521499841.325 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:50:41.325Z,1521499841.325 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:50:41.731Z,1521499841.731 [Default:CheckIn:D] Stopped
2018-03-19T22:50:41.731Z,1521499841.731 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:50:42.123Z,1521499842.123 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 118.423633 min 
2018-03-19T22:50:42.123Z,1521499842.123 [Default:CheckIn:E] Stopped
2018-03-19T22:50:42.123Z,1521499842.123 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:50:42.123Z,1521499842.123 [Default:CheckIn] Stopped
2018-03-19T22:50:42.124Z,1521499842.124 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:50:42.124Z,1521499842.124 [Default:CheckIn](INFO): Running loop #20
2018-03-19T22:50:42.124Z,1521499842.124 [Default:CheckIn] Running Loop=20
2018-03-19T22:50:42.124Z,1521499842.124 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:50:42.124Z,1521499842.124 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:50:45.475Z,1521499845.475 [NAL9602](INFO): Powering up
2018-03-19T22:50:56.640Z,1521499856.640 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:52:00.643Z,1521499920.643 [NAL9602](INFO): SBD MO Status=2, MOMSN=4879, MT Status=2, MTMSN=0
2018-03-19T22:52:00.643Z,1521499920.643 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T22:52:11.834Z,1521499931.834 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-03-19T22:52:29.045Z,1521499949.045 [NAL9602](INFO): SBD MO Status=2, MOMSN=4879, MT Status=2, MTMSN=0
2018-03-19T22:52:29.045Z,1521499949.045 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2018-03-19T22:52:43.437Z,1521499963.437 [NAL9602](INFO): SBD MO Status=0, MOMSN=4879, MT Status=0, MTMSN=0
2018-03-19T22:52:43.437Z,1521499963.437 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:52:44.697Z,1521499964.697 [NAL9602](INFO): GPS fix at 20180319T225243: (36.806903, -121.823023)
2018-03-19T22:52:44.768Z,1521499964.768 [UniversalFixResidualReporter](INFO): Fix residual: 68.6 %DT, over the last 4428.2 m. Residual distance 3038.0 m at bearing 102.7 degrees. Fix at (36.8069, -121.8230) with 2927.1 m made good.
2018-03-19T22:52:44.769Z,1521499964.769 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:52:44.769Z,1521499964.769 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:52:55.385Z,1521499975.385 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0136.lzma
2018-03-19T22:52:56.183Z,1521499976.183 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0136.lzma.bak
2018-03-19T22:52:56.184Z,1521499976.184 [DataOverHttps](INFO): SBD MOMSN=8139107
2018-03-19T22:53:06.458Z,1521499986.458 [DataOverHttps](INFO): Sending 268 bytes from file Logs/20180319T193343/Express0137.lzma
2018-03-19T22:53:07.255Z,1521499987.255 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0137.lzma.bak
2018-03-19T22:53:07.256Z,1521499987.256 [DataOverHttps](INFO): SBD MOMSN=8139110
2018-03-19T22:53:07.717Z,1521499987.717 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T22:53:07.717Z,1521499987.717 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T22:53:07.717Z,1521499987.717 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T22:53:17.424Z,1521499997.424 [NAL9602](INFO): Powering down
2018-03-19T22:53:34.347Z,1521500014.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:53:35.007Z,1521500015.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:53:57.509Z,1521500037.509 [CBIT](DEBUG): EFC running - data check-sum false
2018-03-19T22:55:26.339Z,1521500126.339 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:55:27.007Z,1521500127.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:56:56.303Z,1521500216.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:56:57.100Z,1521500217.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:56:57.507Z,1521500217.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:56:58.303Z,1521500218.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:56:59.100Z,1521500219.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:56:59.507Z,1521500219.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:00.303Z,1521500220.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:01.100Z,1521500221.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:01.507Z,1521500221.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:02.303Z,1521500222.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:03.100Z,1521500223.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:03.507Z,1521500223.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:04.303Z,1521500224.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:05.101Z,1521500225.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:05.511Z,1521500225.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:06.307Z,1521500226.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:07.104Z,1521500227.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:07.511Z,1521500227.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:08.307Z,1521500228.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:09.104Z,1521500229.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:09.507Z,1521500229.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:10.303Z,1521500230.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:11.100Z,1521500231.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:11.503Z,1521500231.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:12.299Z,1521500232.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:13.096Z,1521500233.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:13.567Z,1521500233.567 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:14.363Z,1521500234.363 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:15.159Z,1521500235.159 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:57:15.563Z,1521500235.563 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:58:08.338Z,1521500288.338 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-03-19T22:58:08.338Z,1521500288.338 [Default:CheckIn:C.Wait] Stopped
2018-03-19T22:58:08.338Z,1521500288.338 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-03-19T22:58:08.339Z,1521500288.339 [Default:CheckIn:D] Running Loop=1
2018-03-19T22:58:08.742Z,1521500288.742 [Default:CheckIn:D] Stopped
2018-03-19T22:58:08.742Z,1521500288.742 [Default:CheckIn:E] Running Loop=1
2018-03-19T22:58:09.176Z,1521500289.176 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 125.873828 min 
2018-03-19T22:58:09.177Z,1521500289.177 [Default:CheckIn:E] Stopped
2018-03-19T22:58:09.177Z,1521500289.177 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-03-19T22:58:09.177Z,1521500289.177 [Default:CheckIn] Stopped
2018-03-19T22:58:09.177Z,1521500289.177 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-03-19T22:58:09.177Z,1521500289.177 [Default:CheckIn](INFO): Running loop #21
2018-03-19T22:58:09.177Z,1521500289.177 [Default:CheckIn] Running Loop=21
2018-03-19T22:58:09.177Z,1521500289.177 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-03-19T22:58:09.177Z,1521500289.177 [Default:CheckIn:Read_GPS] Running Loop=1
2018-03-19T22:58:09.884Z,1521500289.884 [NAL9602](INFO): Powering up
2018-03-19T22:58:22.069Z,1521500302.069 [NAL9602](INFO): NAL9602 initialized
2018-03-19T22:58:35.280Z,1521500315.280 [NAL9602](INFO): SBD MO Status=0, MOMSN=4880, MT Status=0, MTMSN=0
2018-03-19T22:58:35.280Z,1521500315.280 [NAL9602](INFO): No messages in MT queue
2018-03-19T22:58:56.311Z,1521500336.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:58:57.108Z,1521500337.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:58:57.515Z,1521500337.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:58:58.311Z,1521500338.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:58:59.108Z,1521500339.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:58:59.517Z,1521500339.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:00.311Z,1521500340.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:01.107Z,1521500341.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:01.511Z,1521500341.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:02.307Z,1521500342.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:03.103Z,1521500343.103 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:03.507Z,1521500343.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:04.303Z,1521500344.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:05.100Z,1521500345.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:05.507Z,1521500345.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:06.303Z,1521500346.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:07.101Z,1521500347.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:07.511Z,1521500347.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:10.307Z,1521500350.307 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:11.107Z,1521500351.107 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:11.511Z,1521500351.511 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:22.344Z,1521500362.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:23.139Z,1521500363.139 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:23.543Z,1521500363.543 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T22:59:50.659Z,1521500390.659 [NAL9602](INFO): GPS fix at 20180319T225950: (36.806612, -121.822220)
2018-03-19T22:59:50.736Z,1521500390.736 [UniversalFixResidualReporter](INFO): Fix residual: 98.8 %DT, over the last 18680.3 m. Residual distance 18455.2 m at bearing -115.2 degrees. Fix at (36.8066, -121.8222) with 78.5 m made good.
2018-03-19T22:59:50.737Z,1521500390.737 [Default:CheckIn:Read_GPS] Stopped
2018-03-19T22:59:50.737Z,1521500390.737 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-03-19T22:59:55.270Z,1521500395.270 [DataOverHttps](INFO): Sending 72 bytes from file Logs/20180319T193343/Courier0140.lzma
2018-03-19T22:59:56.069Z,1521500396.069 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Courier0140.lzma.bak
2018-03-19T22:59:56.069Z,1521500396.069 [DataOverHttps](INFO): SBD MOMSN=8139150
2018-03-19T23:00:07.022Z,1521500407.022 [DataOverHttps](INFO): Sending 346 bytes from file Logs/20180319T193343/Express0141.lzma
2018-03-19T23:00:07.819Z,1521500407.819 [DataOverHttps](INFO): Moved sent file to Logs/20180319T193343/Express0141.lzma.bak
2018-03-19T23:00:07.820Z,1521500407.820 [DataOverHttps](INFO): SBD MOMSN=8139154
2018-03-19T23:00:08.313Z,1521500408.313 [Default:CheckIn:Read_Iridium] Stopped
2018-03-19T23:00:08.313Z,1521500408.313 [Default:CheckIn:C.Wait] Running Loop=1
2018-03-19T23:00:08.313Z,1521500408.313 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-03-19T23:00:25.628Z,1521500425.628 [NAL9602](INFO): Powering down
2018-03-19T23:00:44.295Z,1521500444.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:45.092Z,1521500445.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:45.499Z,1521500445.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:46.295Z,1521500446.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:47.092Z,1521500447.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:47.499Z,1521500447.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:48.295Z,1521500448.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:49.095Z,1521500449.095 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:49.499Z,1521500449.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:50.295Z,1521500450.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:51.092Z,1521500451.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:51.499Z,1521500451.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:52.297Z,1521500452.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:53.092Z,1521500453.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:53.499Z,1521500453.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:54.295Z,1521500454.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:55.092Z,1521500455.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:55.499Z,1521500455.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:56.295Z,1521500456.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:57.092Z,1521500457.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:57.499Z,1521500457.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:58.295Z,1521500458.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:59.093Z,1521500459.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:00:59.499Z,1521500459.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:00.295Z,1521500460.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:01.092Z,1521500461.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:01.499Z,1521500461.499 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:04.295Z,1521500464.295 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:05.092Z,1521500465.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:05.495Z,1521500465.495 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:08.292Z,1521500468.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:09.088Z,1521500469.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:09.507Z,1521500469.507 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:10.303Z,1521500470.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:11.101Z,1521500471.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:11.527Z,1521500471.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:12.323Z,1521500472.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:13.120Z,1521500473.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:13.527Z,1521500473.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:14.323Z,1521500474.323 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:15.119Z,1521500475.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:01:15.523Z,1521500475.523 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2018-03-19T23:02:13.651Z,1521500533.651 [DataOverHttps](IMPORTANT): SBD MTMSN=20180319T230213