2018-02-26T17:36:34.449Z,1519666594.449 [Supervisor](DEBUG): Initializing supervisor.
2018-02-26T17:36:34.451Z,1519666594.451 [SyncHandler](DEBUG): Created PCaller Thread at 404514E0
2018-02-26T17:36:34.452Z,1519666594.452 [SyncHandler](INFO): Protected caller Thread ID is 799
2018-02-26T17:36:34.452Z,1519666594.452 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2018-02-26T17:36:34.453Z,1519666594.453 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 404814E0
2018-02-26T17:36:34.454Z,1519666594.454 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 800
2018-02-26T17:36:34.456Z,1519666594.456 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2018-02-26T17:36:34.467Z,1519666594.467 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2018-02-26T17:36:34.468Z,1519666594.468 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 404B14E0
2018-02-26T17:36:34.468Z,1519666594.468 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 801
2018-02-26T17:36:34.469Z,1519666594.469 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2018-02-26T17:36:34.470Z,1519666594.470 [logger ThreadHandler](DEBUG): Created PCaller Thread at 404E14E0
2018-02-26T17:36:34.470Z,1519666594.470 [logger ThreadHandler](INFO): Protected caller Thread ID is 802
2018-02-26T17:36:34.472Z,1519666594.472 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2018-02-26T17:36:34.473Z,1519666594.473 [Supervisor](INFO): Looking for Config files in directory: Config/
2018-02-26T17:36:34.477Z,1519666594.477 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2018-02-26T17:36:34.773Z,1519666594.773 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2018-02-26T17:36:34.775Z,1519666594.775 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2018-02-26T17:36:34.960Z,1519666594.960 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2018-02-26T17:36:34.962Z,1519666594.962 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2018-02-26T17:36:35.221Z,1519666595.221 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2018-02-26T17:36:35.222Z,1519666595.222 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2018-02-26T17:36:35.358Z,1519666595.358 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2018-02-26T17:36:35.359Z,1519666595.359 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2018-02-26T17:36:35.453Z,1519666595.453 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2018-02-26T17:36:35.455Z,1519666595.455 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2018-02-26T17:36:35.879Z,1519666595.879 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2018-02-26T17:36:35.879Z,1519666595.879 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2018-02-26T17:36:36.197Z,1519666596.197 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2018-02-26T17:36:36.198Z,1519666596.198 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2018-02-26T17:36:36.611Z,1519666596.611 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2018-02-26T17:36:36.613Z,1519666596.613 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2018-02-26T17:36:36.715Z,1519666596.715 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2018-02-26T17:36:36.716Z,1519666596.716 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2018-02-26T17:36:36.812Z,1519666596.812 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2018-02-26T17:36:36.813Z,1519666596.813 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2018-02-26T17:36:37.006Z,1519666597.006 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2018-02-26T17:36:37.007Z,1519666597.007 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2018-02-26T17:36:37.204Z,1519666597.204 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2018-02-26T17:36:37.204Z,1519666597.204 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2018-02-26T17:36:37.523Z,1519666597.523 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2018-02-26T17:36:37.524Z,1519666597.524 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2018-02-26T17:36:38.060Z,1519666598.060 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2018-02-26T17:36:38.060Z,1519666598.060 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2018-02-26T17:36:38.141Z,1519666598.141 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2018-02-26T17:36:38.145Z,1519666598.145 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2018-02-26T17:36:38.245Z,1519666598.245 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2018-02-26T17:36:38.333Z,1519666598.333 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2018-02-26T17:36:38.425Z,1519666598.425 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2018-02-26T17:36:38.509Z,1519666598.509 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2018-02-26T17:36:38.651Z,1519666598.651 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2018-02-26T17:36:38.814Z,1519666598.814 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2018-02-26T17:36:38.890Z,1519666598.890 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2018-02-26T17:36:39.110Z,1519666599.110 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2018-02-26T17:36:39.111Z,1519666599.111 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2018-02-26T17:36:39.193Z,1519666599.193 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2018-02-26T17:36:39.282Z,1519666599.282 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2018-02-26T17:36:39.379Z,1519666599.379 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2018-02-26T17:36:39.499Z,1519666599.499 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2018-02-26T17:36:39.509Z,1519666599.509 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2018-02-26T17:36:39.782Z,1519666599.782 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2018-02-26T17:36:39.783Z,1519666599.783 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2018-02-26T17:36:39.837Z,1519666599.837 [DepthRateCalculator] Loaded
2018-02-26T17:36:39.838Z,1519666599.838 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2018-02-26T17:36:39.843Z,1519666599.843 [PitchRateCalculator] Loaded
2018-02-26T17:36:39.844Z,1519666599.844 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2018-02-26T17:36:39.859Z,1519666599.859 [SpeedCalculator] Loaded
2018-02-26T17:36:39.859Z,1519666599.859 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2018-02-26T17:36:39.879Z,1519666599.879 [TempGradientCalculator] Loaded
2018-02-26T17:36:39.879Z,1519666599.879 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2018-02-26T17:36:39.894Z,1519666599.894 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2018-02-26T17:36:39.894Z,1519666599.894 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2018-02-26T17:36:39.899Z,1519666599.899 [YawRateCalculator] Loaded
2018-02-26T17:36:39.900Z,1519666599.900 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2018-02-26T17:36:39.900Z,1519666599.900 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2018-02-26T17:36:39.901Z,1519666599.901 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2018-02-26T17:36:40.017Z,1519666600.017 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2018-02-26T17:36:40.017Z,1519666600.017 [StratificationFrontDetector](DEBUG): (re)initializing
2018-02-26T17:36:40.017Z,1519666600.017 [StratificationFrontDetector] Loaded
2018-02-26T17:36:40.018Z,1519666600.018 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2018-02-26T17:36:40.018Z,1519666600.018 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2018-02-26T17:36:40.019Z,1519666600.019 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2018-02-26T17:36:40.149Z,1519666600.149 [BuoyancyServo] Loaded
2018-02-26T17:36:40.150Z,1519666600.150 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2018-02-26T17:36:40.164Z,1519666600.164 [ElevatorServo] Loaded
2018-02-26T17:36:40.164Z,1519666600.164 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2018-02-26T17:36:40.178Z,1519666600.178 [MassServo] Loaded
2018-02-26T17:36:40.178Z,1519666600.178 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2018-02-26T17:36:40.193Z,1519666600.193 [RudderServo] Loaded
2018-02-26T17:36:40.193Z,1519666600.193 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2018-02-26T17:36:40.206Z,1519666600.206 [ThrusterServo] Loaded
2018-02-26T17:36:40.207Z,1519666600.207 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2018-02-26T17:36:40.207Z,1519666600.207 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2018-02-26T17:36:40.208Z,1519666600.208 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2018-02-26T17:36:40.231Z,1519666600.231 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2018-02-26T17:36:40.232Z,1519666600.232 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2018-02-26T17:36:40.350Z,1519666600.350 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2018-02-26T17:36:40.351Z,1519666600.351 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2018-02-26T17:36:40.881Z,1519666600.881 [DataOverHttps] Loaded
2018-02-26T17:36:40.881Z,1519666600.881 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2018-02-26T17:36:40.894Z,1519666600.894 [Depth_Keller] Loaded
2018-02-26T17:36:40.894Z,1519666600.894 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2018-02-26T17:36:40.899Z,1519666600.899 [DropWeight] Loaded
2018-02-26T17:36:40.899Z,1519666600.899 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2018-02-26T17:36:40.993Z,1519666600.993 [NAL9602] Loaded
2018-02-26T17:36:40.993Z,1519666600.993 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2018-02-26T17:36:41.008Z,1519666601.008 [Onboard] Loaded
2018-02-26T17:36:41.008Z,1519666601.008 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2018-02-26T17:36:41.018Z,1519666601.018 [Radio_Surface] Loaded
2018-02-26T17:36:41.018Z,1519666601.018 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2018-02-26T17:36:41.019Z,1519666601.019 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 4086F4E0
2018-02-26T17:36:41.020Z,1519666601.020 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 884
2018-02-26T17:36:41.170Z,1519666601.170 [PNI_TCM] Loaded
2018-02-26T17:36:41.171Z,1519666601.171 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2018-02-26T17:36:42.847Z,1519666602.847 [BPC1] Loaded
2018-02-26T17:36:42.847Z,1519666602.847 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2018-02-26T17:36:42.848Z,1519666602.848 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2018-02-26T17:36:42.849Z,1519666602.849 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2018-02-26T17:36:43.377Z,1519666603.377 [SBIT](DEBUG): Construct Startup Built In Test.
2018-02-26T17:36:43.401Z,1519666603.401 [SBIT] Loaded
2018-02-26T17:36:43.402Z,1519666603.402 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2018-02-26T17:36:43.402Z,1519666603.402 [IBIT](DEBUG): Construct Initiated Built In Test.
2018-02-26T17:36:43.413Z,1519666603.413 [IBIT] Loaded
2018-02-26T17:36:43.414Z,1519666603.414 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2018-02-26T17:36:43.417Z,1519666603.417 [CBIT](DEBUG): Construct Continuous Built In Test.
2018-02-26T17:36:43.562Z,1519666603.562 [CBIT] Loaded
2018-02-26T17:36:43.562Z,1519666603.562 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2018-02-26T17:36:43.563Z,1519666603.563 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2018-02-26T17:36:43.563Z,1519666603.563 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2018-02-26T17:36:43.744Z,1519666603.744 [Aanderaa_O2] Loaded
2018-02-26T17:36:43.744Z,1519666603.744 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2018-02-26T17:36:43.755Z,1519666603.755 [CANONSampler] Loaded
2018-02-26T17:36:43.756Z,1519666603.756 [ComponentRegistry](DEBUG): SyncComponent "CANONSampler" handled in the control thread.
2018-02-26T17:36:43.830Z,1519666603.830 [CTD_NeilBrown] Loaded
2018-02-26T17:36:43.830Z,1519666603.830 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2018-02-26T17:36:43.831Z,1519666603.831 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 4092F4E0
2018-02-26T17:36:43.831Z,1519666603.831 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 885
2018-02-26T17:36:43.875Z,1519666603.875 [CTD_Seabird] Loaded
2018-02-26T17:36:43.876Z,1519666603.876 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2018-02-26T17:36:43.877Z,1519666603.877 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 4095F4E0
2018-02-26T17:36:43.877Z,1519666603.877 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 886
2018-02-26T17:36:43.891Z,1519666603.891 [PAR_Licor] Loaded
2018-02-26T17:36:43.891Z,1519666603.891 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2018-02-26T17:36:43.938Z,1519666603.938 [WetLabsBB2FL] Loaded
2018-02-26T17:36:43.938Z,1519666603.938 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2018-02-26T17:36:43.939Z,1519666603.939 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 4098F4E0
2018-02-26T17:36:43.939Z,1519666603.939 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 887
2018-02-26T17:36:43.940Z,1519666603.940 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2018-02-26T17:36:43.940Z,1519666603.940 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2018-02-26T17:36:44.025Z,1519666604.025 [VerticalControl](DEBUG): Construct VerticalControl.
2018-02-26T17:36:44.108Z,1519666604.108 [VerticalControl] Loaded
2018-02-26T17:36:44.109Z,1519666604.109 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2018-02-26T17:36:44.109Z,1519666604.109 [HorizontalControl](DEBUG): Construct HorizontalControl.
2018-02-26T17:36:44.164Z,1519666604.164 [HorizontalControl] Loaded
2018-02-26T17:36:44.165Z,1519666604.165 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2018-02-26T17:36:44.165Z,1519666604.165 [SpeedControl](DEBUG): Construct SpeedControl.
2018-02-26T17:36:44.167Z,1519666604.167 [SpeedControl] Loaded
2018-02-26T17:36:44.167Z,1519666604.167 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2018-02-26T17:36:44.168Z,1519666604.168 [LoopControl](DEBUG): Construct LoopControl.
2018-02-26T17:36:44.168Z,1519666604.168 [LoopControl] Loaded
2018-02-26T17:36:44.169Z,1519666604.169 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2018-02-26T17:36:44.169Z,1519666604.169 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2018-02-26T17:36:44.170Z,1519666604.170 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2018-02-26T17:36:44.206Z,1519666604.206 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2018-02-26T17:36:44.206Z,1519666604.206 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2018-02-26T17:36:44.310Z,1519666604.310 [DeadReckonUsingSpeedCalculator] Loaded
2018-02-26T17:36:44.310Z,1519666604.310 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2018-02-26T17:36:44.363Z,1519666604.363 [DeadReckonWithRespectToSeafloor] Loaded
2018-02-26T17:36:44.363Z,1519666604.363 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2018-02-26T17:36:44.379Z,1519666604.379 [NavChart] Loaded
2018-02-26T17:36:44.379Z,1519666604.379 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2018-02-26T17:36:44.383Z,1519666604.383 [UniversalFixResidualReporter] Loaded
2018-02-26T17:36:44.383Z,1519666604.383 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2018-02-26T17:36:44.384Z,1519666604.384 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2018-02-26T17:36:44.387Z,1519666604.387 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2018-02-26T17:36:44.388Z,1519666604.388 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2018-02-26T17:36:44.394Z,1519666604.394 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2018-02-26T17:36:44.395Z,1519666604.395 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40A1A4E0
2018-02-26T17:36:44.396Z,1519666604.396 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 888
2018-02-26T17:36:44.400Z,1519666604.400 [Supervisor](INFO): Main Thread ID is 795
2018-02-26T17:36:44.400Z,1519666604.400 [Supervisor](DEBUG): Running supervisor.
2018-02-26T17:36:44.401Z,1519666604.401 [CommandLine ThreadHandler](INFO): Handler Thread ID is 889
2018-02-26T17:36:44.403Z,1519666604.403 [controlThread ThreadHandler](INFO): Handler Thread ID is 890
2018-02-26T17:36:44.404Z,1519666604.404 [controlThread](DEBUG): Initializing ControlThread
2018-02-26T17:36:44.405Z,1519666604.405 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2018-02-26T17:36:44.405Z,1519666604.405 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2018-02-26T17:36:44.405Z,1519666604.405 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2018-02-26T17:36:44.406Z,1519666604.406 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2018-02-26T17:36:44.406Z,1519666604.406 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2018-02-26T17:36:44.407Z,1519666604.407 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2018-02-26T17:36:44.415Z,1519666604.415 [SBIT](INFO): Initialize SBIT Component.
2018-02-26T17:36:44.416Z,1519666604.416 [SBIT](IMPORTANT): git: 2018-02-19
2018-02-26T17:36:44.416Z,1519666604.416 [SBIT](INFO): git hash: 86d1787471b878e1ef111bfaa0f2159f48b0acda
2018-02-26T17:36:44.416Z,1519666604.416 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2018-02-26T17:36:44.417Z,1519666604.417 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #2 PREEMPT Thu Jan 11 20:13:48 PST 2018
2018-02-26T17:36:44.418Z,1519666604.418 [SBIT](INFO): Beginning SBIT in 23.000000 seconds.
2018-02-26T17:36:44.419Z,1519666604.419 [IBIT](INFO): Initialize IBIT Component.
2018-02-26T17:36:44.420Z,1519666604.420 [CBIT](DEBUG): Initialize CBIT Component.
2018-02-26T17:36:44.420Z,1519666604.420 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2018-02-26T17:36:44.421Z,1519666604.421 [logger ThreadHandler](INFO): Handler Thread ID is 891
2018-02-26T17:36:44.437Z,1519666604.437 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 892
2018-02-26T17:36:44.443Z,1519666604.443 [Radio_Surface](INFO): Powering up
2018-02-26T17:36:44.449Z,1519666604.449 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 893
2018-02-26T17:36:44.450Z,1519666604.450 [CTD_NeilBrown](INFO): Powering down
2018-02-26T17:36:44.473Z,1519666604.473 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 894
2018-02-26T17:36:44.474Z,1519666604.474 [CTD_Seabird](INFO): Initializing
2018-02-26T17:36:44.474Z,1519666604.474 [CTD_Seabird](INFO): Checking LCM
2018-02-26T17:36:44.529Z,1519666604.529 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2018-02-26T17:36:44.531Z,1519666604.531 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2018-02-26T17:36:44.531Z,1519666604.531 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2018-02-26T17:36:44.532Z,1519666604.532 [LoopControl](DEBUG): Initialize LoopControlComponent.
2018-02-26T17:36:44.532Z,1519666604.532 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T17:36:44.533Z,1519666604.533 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:36:44.534Z,1519666604.534 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:36:44.534Z,1519666604.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T17:36:44.534Z,1519666604.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:36:44.535Z,1519666604.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:36:44.535Z,1519666604.535 [NavChart](DEBUG): Initialize NavChart Navigation.
2018-02-26T17:36:44.535Z,1519666604.535 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2018-02-26T17:36:44.606Z,1519666604.606 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2018-02-26T17:36:44.616Z,1519666604.616 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 895
2018-02-26T17:36:44.618Z,1519666604.618 [WetLabsBB2FL](INFO): Powering down
2018-02-26T17:36:44.633Z,1519666604.633 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 896
2018-02-26T17:36:44.802Z,1519666604.802 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2018-02-26T17:36:44.802Z,1519666604.802 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2018-02-26T17:36:44.802Z,1519666604.802 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2018-02-26T17:36:44.802Z,1519666604.802 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2018-02-26T17:36:44.803Z,1519666604.803 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2018-02-26T17:36:44.803Z,1519666604.803 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2018-02-26T17:36:44.803Z,1519666604.803 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2018-02-26T17:36:44.803Z,1519666604.803 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2018-02-26T17:36:44.803Z,1519666604.803 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2018-02-26T17:36:44.804Z,1519666604.804 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2018-02-26T17:36:44.804Z,1519666604.804 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2018-02-26T17:36:44.804Z,1519666604.804 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2018-02-26T17:36:44.804Z,1519666604.804 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2018-02-26T17:36:44.804Z,1519666604.804 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2018-02-26T17:36:44.804Z,1519666604.804 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2018-02-26T17:36:44.805Z,1519666604.805 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2018-02-26T17:36:44.808Z,1519666604.808 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2018-02-26T17:36:44.885Z,1519666604.885 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2018-02-26T17:36:44.886Z,1519666604.886 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2018-02-26T17:36:44.898Z,1519666604.898 [CTD_Seabird](INFO): LCM OK
2018-02-26T17:36:44.898Z,1519666604.898 [CTD_Seabird](INFO): Powering up
2018-02-26T17:36:44.994Z,1519666604.994 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2018-02-26T17:36:44.995Z,1519666604.995 [Default:A.Wait](DEBUG): Construct Wait.
2018-02-26T17:36:45.009Z,1519666605.009 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2018-02-26T17:36:45.037Z,1519666605.037 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2018-02-26T17:36:45.040Z,1519666605.040 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2018-02-26T17:36:45.061Z,1519666605.061 [Default:E.Execute](DEBUG): Construct Execute.
2018-02-26T17:36:45.065Z,1519666605.065 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2018-02-26T17:36:45.075Z,1519666605.075 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,Aanderaa_O2,CANONSampler,PAR_Licor,Depth_Keller,PAR_Licor,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2018-02-26T17:36:45.102Z,1519666605.102 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2018-02-26T17:36:45.110Z,1519666605.110 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2018-02-26T17:36:45.308Z,1519666605.308 [CANONSampler](INFO): Powering down
2018-02-26T17:36:45.453Z,1519666605.453 [DepthRateCalculator](ERROR): Depth measurement is not active
2018-02-26T17:36:45.538Z,1519666605.538 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:45.668Z,1519666605.668 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:45.773Z,1519666605.773 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-02-26T17:36:45.781Z,1519666605.781 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-02-26T17:36:45.795Z,1519666605.795 [ElevatorServo](DEBUG): Initializing EZServoServo.
2018-02-26T17:36:45.801Z,1519666605.801 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2018-02-26T17:36:45.807Z,1519666605.807 [MassServo](DEBUG): Initializing EZServoServo.
2018-02-26T17:36:45.813Z,1519666605.813 [MassServo](DEBUG): Initializing MassServo.
2018-02-26T17:36:45.827Z,1519666605.827 [RudderServo](DEBUG): Initializing EZServoServo.
2018-02-26T17:36:45.833Z,1519666605.833 [RudderServo](DEBUG): Initializing RudderServo.
2018-02-26T17:36:45.846Z,1519666605.846 [ThrusterServo](DEBUG): Initializing EZServoServo.
2018-02-26T17:36:45.853Z,1519666605.853 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2018-02-26T17:36:46.178Z,1519666606.178 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:46.179Z,1519666606.179 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:46.413Z,1519666606.413 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:46.414Z,1519666606.414 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:46.745Z,1519666606.745 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2018-02-26T17:36:46.745Z,1519666606.745 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2018-02-26T17:36:46.745Z,1519666606.745 [BuoyancyServo] Communications Fault, FailCount= 1
2018-02-26T17:36:46.745Z,1519666606.745 [BuoyancyServo](ERROR): Communications Fault
2018-02-26T17:36:46.944Z,1519666606.944 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2018-02-26T17:36:47.007Z,1519666607.007 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:47.008Z,1519666607.008 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:47.029Z,1519666607.029 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2018-02-26T17:36:47.030Z,1519666607.030 [BuoyancyServo](INFO): Powering down
2018-02-26T17:36:47.420Z,1519666607.420 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:47.429Z,1519666607.429 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:47.840Z,1519666607.840 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:47.841Z,1519666607.841 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:48.204Z,1519666608.204 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:48.205Z,1519666608.205 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:48.709Z,1519666608.709 [Aanderaa_O2](INFO): Powering down
2018-02-26T17:36:48.768Z,1519666608.768 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:48.769Z,1519666608.769 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2018-02-26T17:36:49.213Z,1519666609.213 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2018-02-26T17:36:49.213Z,1519666609.213 [BuoyancyServo] No Fault, FailCount= 1
2018-02-26T17:36:49.467Z,1519666609.467 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2018-02-26T17:36:49.586Z,1519666609.586 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2018-02-26T17:36:50.201Z,1519666610.201 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-02-26T17:36:50.340Z,1519666610.340 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2018-02-26T17:36:50.735Z,1519666610.735 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2018-02-26T17:36:51.088Z,1519666611.088 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2018-02-26T17:36:51.088Z,1519666611.088 [CTD_Seabird](INFO): Powering down
2018-02-26T17:37:07.893Z,1519666627.893 [SBIT](IMPORTANT): Beginning Startup BIT
2018-02-26T17:37:07.905Z,1519666627.905 [CBIT](IMPORTANT): Beginning ground fault scan
2018-02-26T17:37:11.106Z,1519666631.106 [NAL9602](INFO): Powering up NAL9602
2018-02-26T17:37:18.827Z,1519666638.827 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): -0.001420
CHAN A1 (24V): -0.005727
CHAN A2 (12V): 4.697929
CHAN A3 (5V): -0.001660
CHAN B0 (3.3V): 0.000201
CHAN B1 (3.15aV): 0.000155
CHAN B2 (3.15bV): -0.000391
CHAN B3 (GND): -0.000386
OPEN: -0.000301
Full Scale Calc: 4.765 mA, -1.589 mA
2018-02-26T17:37:22.306Z,1519666642.306 [NAL9602](INFO): NAL9602 initialized
2018-02-26T17:38:01.910Z,1519666681.910 [SBIT](IMPORTANT): SBIT PASSED
2018-02-26T17:38:02.274Z,1519666682.274 [MissionManager](IMPORTANT): Started mission Startup
2018-02-26T17:38:02.274Z,1519666682.274 [Startup] Running Loop=1
2018-02-26T17:38:02.275Z,1519666682.275 [Startup](DEBUG): Aggregate::initialize Startup
2018-02-26T17:38:02.275Z,1519666682.275 [Startup:A.GoToSurface] Running Loop=1
2018-02-26T17:38:02.275Z,1519666682.275 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-02-26T17:38:02.275Z,1519666682.275 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-02-26T17:38:02.276Z,1519666682.276 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-02-26T17:38:02.276Z,1519666682.276 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-02-26T17:38:02.276Z,1519666682.276 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-02-26T17:38:02.277Z,1519666682.277 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-02-26T17:38:02.294Z,1519666682.294 [Startup:StartupSatComms] Running Loop=1
2018-02-26T17:38:02.294Z,1519666682.294 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2018-02-26T17:38:02.294Z,1519666682.294 [Startup:StartupSatComms:A] Running Loop=1
2018-02-26T17:38:02.668Z,1519666682.668 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2018-02-26T17:39:02.675Z,1519666742.675 [Startup:StartupSatComms:A](INFO): Timed out from 2018-02-26T17:38:02.3Z
2018-02-26T17:39:02.675Z,1519666742.675 [Startup:StartupSatComms:A] Stopped
2018-02-26T17:39:02.675Z,1519666742.675 [Startup:StartupSatComms:B] Running Loop=1
2018-02-26T17:39:03.054Z,1519666743.054 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-02-26T17:39:10.625Z,1519666750.625 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003867
2018-02-26T17:39:14.624Z,1519666754.624 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20180226T173634/Courier0000.lzma
2018-02-26T17:39:15.421Z,1519666755.421 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0000.lzma.bak
2018-02-26T17:39:15.422Z,1519666755.422 [DataOverHttps](INFO): SBD MOMSN=7869006
2018-02-26T17:39:24.197Z,1519666764.197 [DataOverHttps](INFO): Sending 560 bytes from file Logs/20180226T173634/Express0001.lzma
2018-02-26T17:39:24.997Z,1519666764.997 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0001.lzma.bak
2018-02-26T17:39:24.998Z,1519666764.998 [DataOverHttps](INFO): SBD MOMSN=7869009
2018-02-26T17:39:25.449Z,1519666765.449 [Startup:StartupSatComms:B] Stopped
2018-02-26T17:39:25.449Z,1519666765.449 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2018-02-26T17:39:25.449Z,1519666765.449 [Startup:StartupSatComms] Stopped
2018-02-26T17:39:25.449Z,1519666765.449 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2018-02-26T17:39:25.450Z,1519666765.450 [Startup](INFO): Completed Startup
2018-02-26T17:39:25.450Z,1519666765.450 [MissionManager](INFO): Startup is completed.
2018-02-26T17:39:25.450Z,1519666765.450 [MissionManager](INFO): Uninitializing Mission Startup
2018-02-26T17:39:25.451Z,1519666765.451 [Startup] Stopped
2018-02-26T17:39:25.451Z,1519666765.451 [Startup](DEBUG): Aggregate::uninitialize Startup
2018-02-26T17:39:25.451Z,1519666765.451 [Startup:A.GoToSurface] Stopped
2018-02-26T17:39:25.451Z,1519666765.451 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2018-02-26T17:39:25.858Z,1519666765.858 [MissionManager](IMPORTANT): Started mission Default
2018-02-26T17:39:25.858Z,1519666765.858 [Default] Running Loop=1
2018-02-26T17:39:25.858Z,1519666765.858 [Default](DEBUG): Aggregate::initialize Default
2018-02-26T17:39:25.858Z,1519666765.858 [Default:B.GoToSurface] Running Loop=1
2018-02-26T17:39:25.858Z,1519666765.858 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2018-02-26T17:39:25.859Z,1519666765.859 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2018-02-26T17:39:25.859Z,1519666765.859 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2018-02-26T17:39:25.859Z,1519666765.859 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2018-02-26T17:39:25.859Z,1519666765.859 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2018-02-26T17:39:25.860Z,1519666765.860 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2018-02-26T17:39:25.860Z,1519666765.860 [Default:A.Wait] Running Loop=1
2018-02-26T17:39:25.860Z,1519666765.860 [Default:A.Wait](DEBUG): Initialize Wait Component.
2018-02-26T17:39:39.047Z,1519666779.047 [Default:A.Wait](INFO): Done Waiting.
2018-02-26T17:39:39.048Z,1519666779.048 [Default:A.Wait] Stopped
2018-02-26T17:39:39.048Z,1519666779.048 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T17:39:39.451Z,1519666779.451 [Default:CheckIn] Running Loop=1
2018-02-26T17:39:39.451Z,1519666779.451 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T17:39:39.451Z,1519666779.451 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T17:39:39.842Z,1519666779.842 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2018-02-26T17:39:44.624Z,1519666784.624 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:39:44.624Z,1519666784.624 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-02-26T17:39:44.624Z,1519666784.624 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T17:39:44.626Z,1519666784.626 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:39:44.626Z,1519666784.626 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-02-26T17:39:44.626Z,1519666784.626 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T17:39:44.646Z,1519666784.646 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T17:39:44.646Z,1519666784.646 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T17:39:45.058Z,1519666785.058 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T17:39:45.058Z,1519666785.058 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-02-26T17:39:45.058Z,1519666785.058 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T17:39:45.058Z,1519666785.058 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-02-26T17:39:45.428Z,1519666785.428 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T17:39:45.429Z,1519666785.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:39:45.429Z,1519666785.429 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:39:45.430Z,1519666785.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T17:39:45.430Z,1519666785.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:39:45.430Z,1519666785.430 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:40:14.774Z,1519666814.774 [CommandLine](IMPORTANT): got command burn on
2018-02-26T17:40:14.775Z,1519666814.775 [CommandLine](IMPORTANT): Activating dropweight wire
2018-02-26T17:41:01.086Z,1519666861.086 [CommandLine](IMPORTANT): got command burn off
2018-02-26T17:41:01.086Z,1519666861.086 [CommandLine](IMPORTANT): Deactivating dropweight wire
2018-02-26T17:42:21.169Z,1519666941.169 [CommandLine](IMPORTANT): got command burn on
2018-02-26T17:42:21.169Z,1519666941.169 [CommandLine](IMPORTANT): Activating dropweight wire
2018-02-26T17:42:25.750Z,1519666945.750 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2018-02-26T17:42:45.767Z,1519666965.767 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:42:45.767Z,1519666965.767 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-02-26T17:42:45.767Z,1519666965.767 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T17:42:45.769Z,1519666965.769 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:42:45.769Z,1519666965.769 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-02-26T17:42:45.769Z,1519666965.769 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T17:42:45.793Z,1519666965.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T17:42:45.794Z,1519666965.794 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T17:42:46.177Z,1519666966.177 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T17:42:46.177Z,1519666966.177 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-02-26T17:42:46.178Z,1519666966.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T17:42:46.178Z,1519666966.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-02-26T17:42:46.571Z,1519666966.571 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T17:42:46.571Z,1519666966.571 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:42:46.571Z,1519666966.571 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:42:46.572Z,1519666966.572 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T17:42:46.572Z,1519666966.572 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:42:46.572Z,1519666966.572 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:43:21.390Z,1519667001.390 [CommandLine](IMPORTANT): got command burn off
2018-02-26T17:43:21.390Z,1519667001.390 [CommandLine](IMPORTANT): Deactivating dropweight wire
2018-02-26T17:44:39.750Z,1519667079.750 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T17:39:39.5Z
2018-02-26T17:44:39.751Z,1519667079.751 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T17:44:39.751Z,1519667079.751 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T17:44:40.153Z,1519667080.153 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2018-02-26T17:44:44.101Z,1519667084.101 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0004.lzma
2018-02-26T17:44:44.901Z,1519667084.901 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0004.lzma.bak
2018-02-26T17:44:44.901Z,1519667084.901 [DataOverHttps](INFO): SBD MOMSN=7869020
2018-02-26T17:44:53.666Z,1519667093.666 [DataOverHttps](INFO): Sending 276 bytes from file Logs/20180226T173634/Express0005.lzma
2018-02-26T17:44:54.433Z,1519667094.433 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0005.lzma.bak
2018-02-26T17:44:54.433Z,1519667094.433 [DataOverHttps](INFO): SBD MOMSN=7869022
2018-02-26T17:44:54.877Z,1519667094.877 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T17:44:54.877Z,1519667094.877 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T17:44:54.877Z,1519667094.877 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T17:45:46.863Z,1519667146.863 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:45:46.863Z,1519667146.863 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-02-26T17:45:46.863Z,1519667146.863 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T17:45:46.865Z,1519667146.865 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:45:46.865Z,1519667146.865 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-02-26T17:45:46.865Z,1519667146.865 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T17:45:46.876Z,1519667146.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T17:45:46.877Z,1519667146.877 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T17:45:47.243Z,1519667147.243 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T17:45:47.243Z,1519667147.243 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-02-26T17:45:47.244Z,1519667147.244 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T17:45:47.244Z,1519667147.244 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-02-26T17:45:47.628Z,1519667147.628 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T17:45:47.628Z,1519667147.628 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:45:47.629Z,1519667147.629 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:45:47.629Z,1519667147.629 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T17:45:47.630Z,1519667147.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:45:47.630Z,1519667147.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:46:44.423Z,1519667204.423 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T17:47:23.126Z,1519667243.126 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T17:47:23.126Z,1519667243.126 [NAL9602] Data Fault, FailCount= 1
2018-02-26T17:47:23.126Z,1519667243.126 [NAL9602](ERROR): Data Fault
2018-02-26T17:47:23.231Z,1519667243.231 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T17:47:23.526Z,1519667243.526 [NAL9602](INFO): Powering down
2018-02-26T17:47:24.426Z,1519667244.426 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T17:47:24.426Z,1519667244.426 [NAL9602] No Fault, FailCount= 1
2018-02-26T17:47:53.922Z,1519667273.922 [NAL9602](INFO): Powering up NAL9602
2018-02-26T17:48:04.778Z,1519667284.778 [NAL9602](INFO): NAL9602 initialized
2018-02-26T17:48:47.631Z,1519667327.631 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:48:47.631Z,1519667327.631 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-02-26T17:48:47.631Z,1519667327.631 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T17:48:47.633Z,1519667327.633 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:48:47.633Z,1519667327.633 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-02-26T17:48:47.633Z,1519667327.633 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T17:48:47.652Z,1519667327.652 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T17:48:47.653Z,1519667327.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T17:48:48.028Z,1519667328.028 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T17:48:48.028Z,1519667328.028 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-02-26T17:48:48.028Z,1519667328.028 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T17:48:48.028Z,1519667328.028 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-02-26T17:48:48.427Z,1519667328.427 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T17:48:48.428Z,1519667328.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:48:48.428Z,1519667328.428 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:48:48.429Z,1519667328.429 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T17:48:48.429Z,1519667328.429 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:48:48.429Z,1519667328.429 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:49:55.687Z,1519667395.687 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T17:49:55.687Z,1519667395.687 [Default:CheckIn:C.Wait] Stopped
2018-02-26T17:49:55.688Z,1519667395.688 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T17:49:55.688Z,1519667395.688 [Default:CheckIn:D] Running Loop=1
2018-02-26T17:49:56.075Z,1519667396.075 [Default:CheckIn:D] Stopped
2018-02-26T17:49:56.075Z,1519667396.075 [Default:CheckIn:E] Running Loop=1
2018-02-26T17:49:56.484Z,1519667396.484 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.503584 min 
2018-02-26T17:49:56.486Z,1519667396.486 [Default:CheckIn:E] Stopped
2018-02-26T17:49:56.487Z,1519667396.487 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T17:49:56.487Z,1519667396.487 [Default:CheckIn] Stopped
2018-02-26T17:49:56.487Z,1519667396.487 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T17:49:56.487Z,1519667396.487 [Default:CheckIn](INFO): Running loop #2
2018-02-26T17:49:56.487Z,1519667396.487 [Default:CheckIn] Running Loop=2
2018-02-26T17:49:56.487Z,1519667396.487 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T17:49:56.487Z,1519667396.487 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T17:51:48.607Z,1519667508.607 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:51:48.607Z,1519667508.607 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-02-26T17:51:48.607Z,1519667508.607 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T17:51:48.609Z,1519667508.609 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:51:48.609Z,1519667508.609 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-02-26T17:51:48.609Z,1519667508.609 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T17:51:48.643Z,1519667508.643 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T17:51:48.643Z,1519667508.643 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T17:51:49.030Z,1519667509.030 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T17:51:49.030Z,1519667509.030 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-02-26T17:51:49.031Z,1519667509.031 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T17:51:49.031Z,1519667509.031 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-02-26T17:51:49.414Z,1519667509.414 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T17:51:49.414Z,1519667509.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:51:49.414Z,1519667509.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:51:49.415Z,1519667509.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T17:51:49.415Z,1519667509.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:51:49.415Z,1519667509.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:54:49.611Z,1519667689.611 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:54:49.611Z,1519667689.611 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-02-26T17:54:49.611Z,1519667689.611 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T17:54:49.613Z,1519667689.613 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:54:49.613Z,1519667689.613 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-02-26T17:54:49.613Z,1519667689.613 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T17:54:49.625Z,1519667689.625 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T17:54:49.625Z,1519667689.625 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T17:54:50.024Z,1519667690.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T17:54:50.024Z,1519667690.024 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-02-26T17:54:50.025Z,1519667690.025 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T17:54:50.025Z,1519667690.025 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-02-26T17:54:50.412Z,1519667690.412 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T17:54:50.413Z,1519667690.413 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:54:50.413Z,1519667690.413 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:54:50.414Z,1519667690.414 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T17:54:50.414Z,1519667690.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:54:50.414Z,1519667690.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:54:56.835Z,1519667696.835 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T17:49:56.5Z
2018-02-26T17:54:56.835Z,1519667696.835 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T17:54:56.835Z,1519667696.835 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T17:55:00.257Z,1519667700.257 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0008.lzma
2018-02-26T17:55:01.057Z,1519667701.057 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0008.lzma.bak
2018-02-26T17:55:01.057Z,1519667701.057 [DataOverHttps](INFO): SBD MOMSN=7869034
2018-02-26T17:55:09.982Z,1519667709.982 [DataOverHttps](INFO): Sending 171 bytes from file Logs/20180226T173634/Express0009.lzma
2018-02-26T17:55:10.780Z,1519667710.780 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0009.lzma.bak
2018-02-26T17:55:10.781Z,1519667710.781 [DataOverHttps](INFO): SBD MOMSN=7869036
2018-02-26T17:55:11.231Z,1519667711.231 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T17:55:11.231Z,1519667711.231 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T17:55:11.232Z,1519667711.232 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T17:56:44.520Z,1519667804.520 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T17:57:50.615Z,1519667870.615 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:57:50.615Z,1519667870.615 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-02-26T17:57:50.615Z,1519667870.615 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T17:57:50.616Z,1519667870.616 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T17:57:50.617Z,1519667870.617 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-02-26T17:57:50.617Z,1519667870.617 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T17:57:50.650Z,1519667870.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T17:57:50.651Z,1519667870.651 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T17:57:51.014Z,1519667871.014 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T17:57:51.014Z,1519667871.014 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-02-26T17:57:51.014Z,1519667871.014 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T17:57:51.015Z,1519667871.015 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-02-26T17:57:51.406Z,1519667871.406 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T17:57:51.406Z,1519667871.406 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:57:51.407Z,1519667871.407 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:57:51.407Z,1519667871.407 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T17:57:51.407Z,1519667871.407 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T17:57:51.408Z,1519667871.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T17:58:07.750Z,1519667887.750 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T17:58:07.750Z,1519667887.750 [NAL9602] Data Fault, FailCount= 2
2018-02-26T17:58:07.750Z,1519667887.750 [NAL9602](ERROR): Data Fault
2018-02-26T17:58:07.843Z,1519667887.843 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T17:58:08.154Z,1519667888.154 [NAL9602](INFO): Powering down
2018-02-26T17:58:09.012Z,1519667889.012 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T17:58:09.012Z,1519667889.012 [NAL9602] No Fault, FailCount= 2
2018-02-26T17:58:38.534Z,1519667918.534 [NAL9602](INFO): Powering up NAL9602
2018-02-26T17:58:49.734Z,1519667929.734 [NAL9602](INFO): NAL9602 initialized
2018-02-26T18:00:11.759Z,1519668011.759 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T18:00:11.759Z,1519668011.759 [Default:CheckIn:C.Wait] Stopped
2018-02-26T18:00:11.759Z,1519668011.759 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T18:00:11.759Z,1519668011.759 [Default:CheckIn:D] Running Loop=1
2018-02-26T18:00:12.177Z,1519668012.177 [Default:CheckIn:D] Stopped
2018-02-26T18:00:12.177Z,1519668012.177 [Default:CheckIn:E] Running Loop=1
2018-02-26T18:00:12.581Z,1519668012.581 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.771983 min 
2018-02-26T18:00:12.581Z,1519668012.581 [Default:CheckIn:E] Stopped
2018-02-26T18:00:12.581Z,1519668012.581 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T18:00:12.581Z,1519668012.581 [Default:CheckIn] Stopped
2018-02-26T18:00:12.581Z,1519668012.581 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T18:00:12.582Z,1519668012.582 [Default:CheckIn](INFO): Running loop #3
2018-02-26T18:00:12.582Z,1519668012.582 [Default:CheckIn] Running Loop=3
2018-02-26T18:00:12.582Z,1519668012.582 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T18:00:12.582Z,1519668012.582 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T18:00:51.739Z,1519668051.739 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:00:51.739Z,1519668051.739 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-02-26T18:00:51.739Z,1519668051.739 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:00:51.745Z,1519668051.745 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:00:51.745Z,1519668051.745 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-02-26T18:00:51.745Z,1519668051.745 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:00:51.769Z,1519668051.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:00:51.769Z,1519668051.769 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:00:52.142Z,1519668052.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:00:52.142Z,1519668052.142 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-02-26T18:00:52.142Z,1519668052.142 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:00:52.142Z,1519668052.142 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-02-26T18:00:52.534Z,1519668052.534 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:00:52.535Z,1519668052.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:00:52.535Z,1519668052.535 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:00:52.536Z,1519668052.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:00:52.536Z,1519668052.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:00:52.536Z,1519668052.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:03:52.746Z,1519668232.746 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:03:52.747Z,1519668232.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-02-26T18:03:52.747Z,1519668232.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:03:52.748Z,1519668232.748 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:03:52.749Z,1519668232.749 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-02-26T18:03:52.749Z,1519668232.749 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:03:52.777Z,1519668232.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:03:52.777Z,1519668232.777 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:03:53.152Z,1519668233.152 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:03:53.153Z,1519668233.153 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-02-26T18:03:53.153Z,1519668233.153 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:03:53.153Z,1519668233.153 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-02-26T18:03:53.530Z,1519668233.530 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:03:53.530Z,1519668233.530 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:03:53.530Z,1519668233.530 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:03:53.531Z,1519668233.531 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:03:53.531Z,1519668233.531 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:03:53.531Z,1519668233.531 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:05:12.804Z,1519668312.804 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T18:00:12.6Z
2018-02-26T18:05:12.805Z,1519668312.805 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T18:05:12.805Z,1519668312.805 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T18:05:16.771Z,1519668316.771 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0012.lzma
2018-02-26T18:05:17.569Z,1519668317.569 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0012.lzma.bak
2018-02-26T18:05:17.569Z,1519668317.569 [DataOverHttps](INFO): SBD MOMSN=7869040
2018-02-26T18:05:26.470Z,1519668326.470 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180226T173634/Express0013.lzma
2018-02-26T18:05:27.269Z,1519668327.269 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0013.lzma.bak
2018-02-26T18:05:27.269Z,1519668327.269 [DataOverHttps](INFO): SBD MOMSN=7869042
2018-02-26T18:05:27.728Z,1519668327.728 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T18:05:27.728Z,1519668327.728 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T18:05:27.728Z,1519668327.728 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T18:06:44.595Z,1519668404.595 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T18:06:53.795Z,1519668413.795 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:06:53.795Z,1519668413.795 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-02-26T18:06:53.795Z,1519668413.795 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:06:53.797Z,1519668413.797 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:06:53.797Z,1519668413.797 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-02-26T18:06:53.797Z,1519668413.797 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:06:53.809Z,1519668413.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:06:53.809Z,1519668413.809 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:06:54.223Z,1519668414.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:06:54.223Z,1519668414.223 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-02-26T18:06:54.223Z,1519668414.223 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:06:54.223Z,1519668414.223 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-02-26T18:06:54.606Z,1519668414.606 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:06:54.606Z,1519668414.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:06:54.606Z,1519668414.606 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:06:54.607Z,1519668414.607 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:06:54.607Z,1519668414.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:06:54.607Z,1519668414.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:08:51.066Z,1519668531.066 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T18:08:51.066Z,1519668531.066 [NAL9602] Data Fault, FailCount= 3
2018-02-26T18:08:51.066Z,1519668531.066 [NAL9602](ERROR): Data Fault
2018-02-26T18:08:51.162Z,1519668531.162 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T18:08:51.470Z,1519668531.470 [NAL9602](INFO): Powering down
2018-02-26T18:08:52.318Z,1519668532.318 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T18:08:52.318Z,1519668532.318 [NAL9602] No Fault, FailCount= 3
2018-02-26T18:09:21.473Z,1519668561.473 [NAL9602](INFO): Powering up NAL9602
2018-02-26T18:09:32.298Z,1519668572.298 [NAL9602](INFO): NAL9602 initialized
2018-02-26T18:09:54.728Z,1519668594.728 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:09:54.728Z,1519668594.728 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-02-26T18:09:54.728Z,1519668594.728 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:09:54.730Z,1519668594.730 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:09:54.730Z,1519668594.730 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-02-26T18:09:54.730Z,1519668594.730 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:09:54.763Z,1519668594.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:09:54.764Z,1519668594.764 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:09:55.143Z,1519668595.143 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:09:55.143Z,1519668595.143 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-02-26T18:09:55.143Z,1519668595.143 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:09:55.144Z,1519668595.144 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-02-26T18:09:55.542Z,1519668595.542 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:09:55.542Z,1519668595.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:09:55.542Z,1519668595.542 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:09:55.543Z,1519668595.543 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:09:55.543Z,1519668595.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:09:55.543Z,1519668595.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:10:28.351Z,1519668628.351 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T18:10:28.351Z,1519668628.351 [Default:CheckIn:C.Wait] Stopped
2018-02-26T18:10:28.351Z,1519668628.351 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T18:10:28.352Z,1519668628.352 [Default:CheckIn:D] Running Loop=1
2018-02-26T18:10:31.493Z,1519668631.493 [Default:CheckIn:D] Stopped
2018-02-26T18:10:31.493Z,1519668631.493 [Default:CheckIn:E] Running Loop=1
2018-02-26T18:10:31.625Z,1519668631.625 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.093921 min 
2018-02-26T18:10:31.626Z,1519668631.626 [Default:CheckIn:E] Stopped
2018-02-26T18:10:31.626Z,1519668631.626 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T18:10:31.626Z,1519668631.626 [Default:CheckIn] Stopped
2018-02-26T18:10:31.626Z,1519668631.626 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T18:10:31.626Z,1519668631.626 [Default:CheckIn](INFO): Running loop #4
2018-02-26T18:10:31.626Z,1519668631.626 [Default:CheckIn] Running Loop=4
2018-02-26T18:10:31.626Z,1519668631.626 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T18:10:31.627Z,1519668631.627 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T18:12:55.783Z,1519668775.783 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:12:55.783Z,1519668775.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-02-26T18:12:55.783Z,1519668775.783 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:12:55.785Z,1519668775.785 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:12:55.785Z,1519668775.785 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-02-26T18:12:55.785Z,1519668775.785 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:12:55.796Z,1519668775.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:12:55.797Z,1519668775.797 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:12:56.206Z,1519668776.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:12:56.206Z,1519668776.206 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-02-26T18:12:56.207Z,1519668776.207 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:12:56.207Z,1519668776.207 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-02-26T18:12:56.608Z,1519668776.608 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:12:56.608Z,1519668776.608 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:12:56.609Z,1519668776.609 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:12:56.609Z,1519668776.609 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:12:56.609Z,1519668776.609 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:12:56.610Z,1519668776.610 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:15:32.123Z,1519668932.123 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T18:10:31.6Z
2018-02-26T18:15:32.123Z,1519668932.123 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T18:15:32.123Z,1519668932.123 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T18:15:36.915Z,1519668936.915 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0016.lzma
2018-02-26T18:15:37.716Z,1519668937.716 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0016.lzma.bak
2018-02-26T18:15:37.717Z,1519668937.717 [DataOverHttps](INFO): SBD MOMSN=7869046
2018-02-26T18:15:46.870Z,1519668946.870 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0017.lzma
2018-02-26T18:15:47.661Z,1519668947.661 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0017.lzma.bak
2018-02-26T18:15:47.661Z,1519668947.661 [DataOverHttps](INFO): SBD MOMSN=7869048
2018-02-26T18:15:48.133Z,1519668948.133 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T18:15:48.134Z,1519668948.134 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T18:15:48.134Z,1519668948.134 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T18:15:56.864Z,1519668956.864 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:15:56.865Z,1519668956.865 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-02-26T18:15:56.865Z,1519668956.865 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:15:56.866Z,1519668956.866 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:15:56.866Z,1519668956.866 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-02-26T18:15:56.866Z,1519668956.866 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:15:56.878Z,1519668956.878 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:15:56.878Z,1519668956.878 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:15:57.325Z,1519668957.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:15:57.325Z,1519668957.325 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-02-26T18:15:57.325Z,1519668957.325 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:15:57.325Z,1519668957.325 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-02-26T18:15:57.684Z,1519668957.684 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:15:57.685Z,1519668957.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:15:57.685Z,1519668957.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:15:57.685Z,1519668957.685 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:15:57.686Z,1519668957.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:15:57.686Z,1519668957.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:16:44.880Z,1519669004.880 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T18:18:57.727Z,1519669137.727 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:18:57.727Z,1519669137.727 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-02-26T18:18:57.727Z,1519669137.727 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:18:57.733Z,1519669137.733 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:18:57.733Z,1519669137.733 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-02-26T18:18:57.734Z,1519669137.734 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:18:57.754Z,1519669137.754 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:18:57.754Z,1519669137.754 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:18:58.122Z,1519669138.122 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:18:58.122Z,1519669138.122 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-02-26T18:18:58.122Z,1519669138.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:18:58.122Z,1519669138.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-02-26T18:18:58.515Z,1519669138.515 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:18:58.516Z,1519669138.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:18:58.516Z,1519669138.516 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:18:58.517Z,1519669138.517 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:18:58.517Z,1519669138.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:18:58.517Z,1519669138.517 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:19:33.262Z,1519669173.262 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T18:19:33.262Z,1519669173.262 [NAL9602] Data Fault, FailCount= 4
2018-02-26T18:19:33.262Z,1519669173.262 [NAL9602](ERROR): Data Fault
2018-02-26T18:19:33.352Z,1519669173.352 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T18:19:33.661Z,1519669173.661 [NAL9602](INFO): Powering down
2018-02-26T18:19:34.513Z,1519669174.513 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T18:19:34.513Z,1519669174.513 [NAL9602] No Fault, FailCount= 4
2018-02-26T18:20:03.709Z,1519669203.709 [NAL9602](INFO): Powering up NAL9602
2018-02-26T18:20:14.914Z,1519669214.914 [NAL9602](INFO): NAL9602 initialized
2018-02-26T18:20:48.567Z,1519669248.567 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T18:20:48.567Z,1519669248.567 [Default:CheckIn:C.Wait] Stopped
2018-02-26T18:20:48.567Z,1519669248.567 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T18:20:48.567Z,1519669248.567 [Default:CheckIn:D] Running Loop=1
2018-02-26T18:20:48.969Z,1519669248.969 [Default:CheckIn:D] Stopped
2018-02-26T18:20:48.969Z,1519669248.969 [Default:CheckIn:E] Running Loop=1
2018-02-26T18:20:49.371Z,1519669249.371 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.385177 min 
2018-02-26T18:20:49.372Z,1519669249.372 [Default:CheckIn:E] Stopped
2018-02-26T18:20:49.372Z,1519669249.372 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T18:20:49.372Z,1519669249.372 [Default:CheckIn] Stopped
2018-02-26T18:20:49.372Z,1519669249.372 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T18:20:49.372Z,1519669249.372 [Default:CheckIn](INFO): Running loop #5
2018-02-26T18:20:49.372Z,1519669249.372 [Default:CheckIn] Running Loop=5
2018-02-26T18:20:49.372Z,1519669249.372 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T18:20:49.373Z,1519669249.373 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T18:21:58.687Z,1519669318.687 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:21:58.688Z,1519669318.688 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-02-26T18:21:58.688Z,1519669318.688 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:21:58.697Z,1519669318.697 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:21:58.697Z,1519669318.697 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-02-26T18:21:58.697Z,1519669318.697 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:21:58.717Z,1519669318.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:21:58.717Z,1519669318.717 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:21:59.101Z,1519669319.101 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:21:59.101Z,1519669319.101 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-02-26T18:21:59.102Z,1519669319.102 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:21:59.102Z,1519669319.102 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-02-26T18:21:59.486Z,1519669319.486 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:21:59.486Z,1519669319.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:21:59.486Z,1519669319.486 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:21:59.487Z,1519669319.487 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:21:59.487Z,1519669319.487 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:21:59.487Z,1519669319.487 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:24:59.835Z,1519669499.835 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:24:59.835Z,1519669499.835 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-02-26T18:24:59.835Z,1519669499.835 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:24:59.837Z,1519669499.837 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:24:59.837Z,1519669499.837 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-02-26T18:24:59.838Z,1519669499.838 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:24:59.849Z,1519669499.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:24:59.849Z,1519669499.849 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:25:00.255Z,1519669500.255 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:25:00.255Z,1519669500.255 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-02-26T18:25:00.256Z,1519669500.256 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:25:00.256Z,1519669500.256 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-02-26T18:25:00.644Z,1519669500.644 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:25:00.644Z,1519669500.644 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:25:00.645Z,1519669500.645 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:25:00.645Z,1519669500.645 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:25:00.645Z,1519669500.645 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:25:00.646Z,1519669500.646 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:25:49.450Z,1519669549.450 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T18:20:49.4Z
2018-02-26T18:25:49.450Z,1519669549.450 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T18:25:49.450Z,1519669549.450 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T18:25:53.787Z,1519669553.787 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0020.lzma
2018-02-26T18:25:54.577Z,1519669554.577 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0020.lzma.bak
2018-02-26T18:25:54.577Z,1519669554.577 [DataOverHttps](INFO): SBD MOMSN=7869052
2018-02-26T18:26:03.335Z,1519669563.335 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0021.lzma
2018-02-26T18:26:04.117Z,1519669564.117 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0021.lzma.bak
2018-02-26T18:26:04.117Z,1519669564.117 [DataOverHttps](INFO): SBD MOMSN=7869054
2018-02-26T18:26:04.595Z,1519669564.595 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T18:26:04.595Z,1519669564.595 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T18:26:04.595Z,1519669564.595 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T18:26:45.011Z,1519669605.011 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T18:28:00.927Z,1519669680.927 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:28:00.927Z,1519669680.927 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-02-26T18:28:00.927Z,1519669680.927 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:28:00.929Z,1519669680.929 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:28:00.929Z,1519669680.929 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-02-26T18:28:00.929Z,1519669680.929 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:28:00.949Z,1519669680.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:28:00.949Z,1519669680.949 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:28:01.358Z,1519669681.358 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:28:01.358Z,1519669681.358 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-02-26T18:28:01.359Z,1519669681.359 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:28:01.359Z,1519669681.359 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-02-26T18:28:01.731Z,1519669681.731 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:28:01.731Z,1519669681.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:28:01.731Z,1519669681.731 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:28:01.732Z,1519669681.732 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:28:01.732Z,1519669681.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:28:01.732Z,1519669681.732 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:30:18.405Z,1519669818.405 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T18:30:18.406Z,1519669818.406 [NAL9602] Data Fault, FailCount= 5
2018-02-26T18:30:18.406Z,1519669818.406 [NAL9602](ERROR): Data Fault
2018-02-26T18:30:18.474Z,1519669818.474 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T18:30:18.474Z,1519669818.474 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-02-26T18:30:18.806Z,1519669818.806 [NAL9602](INFO): Powering down
2018-02-26T18:30:18.877Z,1519669818.877 [CommandLine](FAULT): Scheduling is paused
2018-02-26T18:30:18.877Z,1519669818.877 [CBIT](INFO): Critical error at 20180226T183018
2018-02-26T18:30:18.877Z,1519669818.877 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2018-02-26T18:31:02.045Z,1519669862.045 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:31:02.046Z,1519669862.046 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-02-26T18:31:02.046Z,1519669862.046 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:31:02.047Z,1519669862.047 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:31:02.047Z,1519669862.047 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-02-26T18:31:02.047Z,1519669862.047 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:31:02.059Z,1519669862.059 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:31:02.059Z,1519669862.059 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:31:02.469Z,1519669862.469 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:31:02.469Z,1519669862.469 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-02-26T18:31:02.470Z,1519669862.470 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:31:02.470Z,1519669862.470 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-02-26T18:31:02.854Z,1519669862.854 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:31:02.854Z,1519669862.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:31:02.854Z,1519669862.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:31:02.855Z,1519669862.855 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:31:02.855Z,1519669862.855 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:31:02.856Z,1519669862.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:31:05.259Z,1519669865.259 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T18:31:05.259Z,1519669865.259 [Default:CheckIn:C.Wait] Stopped
2018-02-26T18:31:05.259Z,1519669865.259 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T18:31:05.259Z,1519669865.259 [Default:CheckIn:D] Running Loop=1
2018-02-26T18:31:05.654Z,1519669865.654 [Default:CheckIn:D] Stopped
2018-02-26T18:31:05.655Z,1519669865.655 [Default:CheckIn:E] Running Loop=1
2018-02-26T18:31:06.039Z,1519669866.039 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.663273 min 
2018-02-26T18:31:06.040Z,1519669866.040 [Default:CheckIn:E] Stopped
2018-02-26T18:31:06.052Z,1519669866.052 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T18:31:06.052Z,1519669866.052 [Default:CheckIn] Stopped
2018-02-26T18:31:06.052Z,1519669866.052 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T18:31:06.052Z,1519669866.052 [Default:CheckIn](INFO): Running loop #6
2018-02-26T18:31:06.052Z,1519669866.052 [Default:CheckIn] Running Loop=6
2018-02-26T18:31:06.053Z,1519669866.053 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T18:31:06.053Z,1519669866.053 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T18:32:18.445Z,1519669938.445 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T18:32:18.445Z,1519669938.445 [NAL9602] No Fault, FailCount= 5
2018-02-26T18:32:18.782Z,1519669938.782 [NAL9602](INFO): Powering up NAL9602
2018-02-26T18:32:29.585Z,1519669949.585 [NAL9602](INFO): NAL9602 initialized
2018-02-26T18:34:03.207Z,1519670043.207 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:34:03.208Z,1519670043.208 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-02-26T18:34:03.208Z,1519670043.208 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:34:03.210Z,1519670043.210 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:34:03.210Z,1519670043.210 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-02-26T18:34:03.210Z,1519670043.210 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:34:03.221Z,1519670043.221 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:34:03.221Z,1519670043.221 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:34:03.631Z,1519670043.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:34:03.631Z,1519670043.631 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-02-26T18:34:03.632Z,1519670043.632 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:34:03.636Z,1519670043.636 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-02-26T18:34:03.000Z,1519670044.000 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:34:04.000Z,1519670044.000 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:34:04.001Z,1519670044.001 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:34:04.001Z,1519670044.001 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:34:04.001Z,1519670044.001 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:34:04.002Z,1519670044.002 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:36:06.375Z,1519670166.375 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T18:31:06.1Z
2018-02-26T18:36:06.376Z,1519670166.376 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T18:36:06.376Z,1519670166.376 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T18:36:10.701Z,1519670170.701 [DataOverHttps](INFO): Sending 93 bytes from file Logs/20180226T173634/Courier0024.lzma
2018-02-26T18:36:11.484Z,1519670171.484 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0024.lzma.bak
2018-02-26T18:36:11.485Z,1519670171.485 [DataOverHttps](INFO): SBD MOMSN=7869058
2018-02-26T18:36:20.237Z,1519670180.237 [DataOverHttps](INFO): Sending 163 bytes from file Logs/20180226T173634/Express0025.lzma
2018-02-26T18:36:21.033Z,1519670181.033 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0025.lzma.bak
2018-02-26T18:36:21.033Z,1519670181.033 [DataOverHttps](INFO): SBD MOMSN=7869061
2018-02-26T18:36:21.501Z,1519670181.501 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T18:36:21.501Z,1519670181.501 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T18:36:21.501Z,1519670181.501 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T18:36:45.084Z,1519670205.084 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T18:37:04.255Z,1519670224.255 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:37:04.255Z,1519670224.255 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-02-26T18:37:04.255Z,1519670224.255 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:37:04.258Z,1519670224.258 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:37:04.259Z,1519670224.259 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-02-26T18:37:04.259Z,1519670224.259 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:37:04.279Z,1519670224.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:37:04.279Z,1519670224.279 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:37:04.280Z,1519670224.280 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:37:04.284Z,1519670224.284 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:41:22.030Z,1519670482.030 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T18:41:22.031Z,1519670482.031 [Default:CheckIn:C.Wait] Stopped
2018-02-26T18:41:22.031Z,1519670482.031 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T18:41:22.031Z,1519670482.031 [Default:CheckIn:D] Running Loop=1
2018-02-26T18:41:22.433Z,1519670482.433 [Default:CheckIn:D] Stopped
2018-02-26T18:41:22.433Z,1519670482.433 [Default:CheckIn:E] Running Loop=1
2018-02-26T18:41:22.837Z,1519670482.837 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 61.942920 min 
2018-02-26T18:41:22.838Z,1519670482.838 [Default:CheckIn:E] Stopped
2018-02-26T18:41:22.838Z,1519670482.838 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T18:41:22.838Z,1519670482.838 [Default:CheckIn] Stopped
2018-02-26T18:41:22.838Z,1519670482.838 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T18:41:22.838Z,1519670482.838 [Default:CheckIn](INFO): Running loop #7
2018-02-26T18:41:22.838Z,1519670482.838 [Default:CheckIn] Running Loop=7
2018-02-26T18:41:22.838Z,1519670482.838 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T18:41:22.838Z,1519670482.838 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T18:42:32.722Z,1519670552.722 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T18:42:32.722Z,1519670552.722 [NAL9602] Data Fault, FailCount= 1
2018-02-26T18:42:32.722Z,1519670552.722 [NAL9602](ERROR): Data Fault
2018-02-26T18:42:32.804Z,1519670552.804 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T18:42:33.121Z,1519670553.121 [NAL9602](INFO): Powering down
2018-02-26T18:42:33.976Z,1519670553.976 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T18:42:33.976Z,1519670553.976 [NAL9602] No Fault, FailCount= 1
2018-02-26T18:43:03.130Z,1519670583.130 [NAL9602](INFO): Powering up NAL9602
2018-02-26T18:43:14.322Z,1519670594.322 [NAL9602](INFO): NAL9602 initialized
2018-02-26T18:46:23.115Z,1519670783.115 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T18:41:22.8Z
2018-02-26T18:46:23.115Z,1519670783.115 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T18:46:23.115Z,1519670783.115 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T18:46:27.721Z,1519670787.721 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0028.lzma
2018-02-26T18:46:28.517Z,1519670788.517 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0028.lzma.bak
2018-02-26T18:46:28.517Z,1519670788.517 [DataOverHttps](INFO): SBD MOMSN=7869066
2018-02-26T18:46:37.293Z,1519670797.293 [DataOverHttps](INFO): Sending 220 bytes from file Logs/20180226T173634/Express0029.lzma
2018-02-26T18:46:38.085Z,1519670798.085 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0029.lzma.bak
2018-02-26T18:46:38.085Z,1519670798.085 [DataOverHttps](INFO): SBD MOMSN=7869068
2018-02-26T18:46:38.536Z,1519670798.536 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T18:46:38.536Z,1519670798.536 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T18:46:38.536Z,1519670798.536 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T18:46:45.349Z,1519670805.349 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T18:51:39.191Z,1519671099.191 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T18:51:39.191Z,1519671099.191 [Default:CheckIn:C.Wait] Stopped
2018-02-26T18:51:39.191Z,1519671099.191 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T18:51:39.191Z,1519671099.191 [Default:CheckIn:D] Running Loop=1
2018-02-26T18:51:39.603Z,1519671099.603 [Default:CheckIn:D] Stopped
2018-02-26T18:51:39.603Z,1519671099.603 [Default:CheckIn:E] Running Loop=1
2018-02-26T18:51:39.991Z,1519671099.991 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.229077 min 
2018-02-26T18:51:39.991Z,1519671099.991 [Default:CheckIn:E] Stopped
2018-02-26T18:51:39.991Z,1519671099.991 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T18:51:39.991Z,1519671099.991 [Default:CheckIn] Stopped
2018-02-26T18:51:39.991Z,1519671099.991 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T18:51:39.991Z,1519671099.991 [Default:CheckIn](INFO): Running loop #8
2018-02-26T18:51:39.991Z,1519671099.991 [Default:CheckIn] Running Loop=8
2018-02-26T18:51:39.992Z,1519671099.992 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T18:51:39.992Z,1519671099.992 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T18:52:04.382Z,1519671124.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:52:04.382Z,1519671124.382 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-02-26T18:52:04.382Z,1519671124.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:52:04.382Z,1519671124.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-02-26T18:52:04.765Z,1519671124.765 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:52:04.766Z,1519671124.766 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:52:04.766Z,1519671124.766 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:52:04.766Z,1519671124.766 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:52:04.767Z,1519671124.767 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:52:04.767Z,1519671124.767 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:53:16.702Z,1519671196.702 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T18:53:16.702Z,1519671196.702 [NAL9602] Data Fault, FailCount= 2
2018-02-26T18:53:16.702Z,1519671196.702 [NAL9602](ERROR): Data Fault
2018-02-26T18:53:16.779Z,1519671196.779 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T18:53:17.101Z,1519671197.101 [NAL9602](INFO): Powering down
2018-02-26T18:53:17.953Z,1519671197.953 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T18:53:17.953Z,1519671197.953 [NAL9602] No Fault, FailCount= 2
2018-02-26T18:53:47.469Z,1519671227.469 [NAL9602](INFO): Powering up NAL9602
2018-02-26T18:53:58.662Z,1519671238.662 [NAL9602](INFO): NAL9602 initialized
2018-02-26T18:55:05.080Z,1519671305.080 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:55:05.080Z,1519671305.080 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-02-26T18:55:05.080Z,1519671305.080 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:55:05.082Z,1519671305.082 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:55:05.082Z,1519671305.082 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-02-26T18:55:05.082Z,1519671305.082 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:55:05.094Z,1519671305.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:55:05.094Z,1519671305.094 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:55:05.480Z,1519671305.480 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:55:05.480Z,1519671305.480 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-02-26T18:55:05.481Z,1519671305.481 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:55:05.481Z,1519671305.481 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-02-26T18:55:05.885Z,1519671305.885 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:55:05.885Z,1519671305.885 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:55:05.885Z,1519671305.885 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:55:05.886Z,1519671305.886 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:55:05.886Z,1519671305.886 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:55:05.887Z,1519671305.887 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:56:40.274Z,1519671400.274 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T18:51:39.0Z
2018-02-26T18:56:40.275Z,1519671400.275 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T18:56:40.275Z,1519671400.275 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T18:56:45.039Z,1519671405.039 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0032.lzma
2018-02-26T18:56:45.529Z,1519671405.529 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T18:56:45.837Z,1519671405.837 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0032.lzma.bak
2018-02-26T18:56:45.837Z,1519671405.837 [DataOverHttps](INFO): SBD MOMSN=7869074
2018-02-26T18:56:54.999Z,1519671414.999 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180226T173634/Express0033.lzma
2018-02-26T18:56:55.797Z,1519671415.797 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0033.lzma.bak
2018-02-26T18:56:55.797Z,1519671415.797 [DataOverHttps](INFO): SBD MOMSN=7869076
2018-02-26T18:56:56.246Z,1519671416.246 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T18:56:56.246Z,1519671416.246 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T18:56:56.246Z,1519671416.246 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T18:58:06.175Z,1519671486.175 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:58:06.175Z,1519671486.175 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-02-26T18:58:06.175Z,1519671486.175 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T18:58:06.178Z,1519671486.178 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T18:58:06.178Z,1519671486.178 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-02-26T18:58:06.178Z,1519671486.178 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T18:58:06.197Z,1519671486.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T18:58:06.198Z,1519671486.198 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T18:58:06.605Z,1519671486.605 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T18:58:06.605Z,1519671486.605 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-02-26T18:58:06.606Z,1519671486.606 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T18:58:06.606Z,1519671486.606 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-02-26T18:58:07.001Z,1519671487.001 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T18:58:07.002Z,1519671487.002 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:58:07.002Z,1519671487.002 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T18:58:07.002Z,1519671487.002 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T18:58:07.003Z,1519671487.003 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T18:58:07.003Z,1519671487.003 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:01:07.310Z,1519671667.310 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:01:07.310Z,1519671667.310 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-02-26T19:01:07.310Z,1519671667.310 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:01:07.312Z,1519671667.312 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:01:07.312Z,1519671667.312 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-02-26T19:01:07.312Z,1519671667.312 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:01:07.324Z,1519671667.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:01:07.325Z,1519671667.325 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:01:07.724Z,1519671667.724 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:01:07.724Z,1519671667.724 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-02-26T19:01:07.724Z,1519671667.724 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:01:07.724Z,1519671667.724 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-02-26T19:01:08.117Z,1519671668.117 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:01:08.117Z,1519671668.117 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:01:08.118Z,1519671668.118 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:01:08.118Z,1519671668.118 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:01:08.118Z,1519671668.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:01:08.119Z,1519671668.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:01:56.928Z,1519671716.928 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T19:01:56.928Z,1519671716.928 [Default:CheckIn:C.Wait] Stopped
2018-02-26T19:01:56.928Z,1519671716.928 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T19:01:56.928Z,1519671716.928 [Default:CheckIn:D] Running Loop=1
2018-02-26T19:01:57.328Z,1519671717.328 [Default:CheckIn:D] Stopped
2018-02-26T19:01:57.329Z,1519671717.329 [Default:CheckIn:E] Running Loop=1
2018-02-26T19:01:57.717Z,1519671717.717 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.524504 min 
2018-02-26T19:01:57.717Z,1519671717.717 [Default:CheckIn:E] Stopped
2018-02-26T19:01:57.717Z,1519671717.717 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T19:01:57.717Z,1519671717.717 [Default:CheckIn] Stopped
2018-02-26T19:01:57.718Z,1519671717.718 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T19:01:57.718Z,1519671717.718 [Default:CheckIn](INFO): Running loop #9
2018-02-26T19:01:57.718Z,1519671717.718 [Default:CheckIn] Running Loop=9
2018-02-26T19:01:57.718Z,1519671717.718 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T19:01:57.718Z,1519671717.718 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T19:04:02.810Z,1519671842.810 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T19:04:02.810Z,1519671842.810 [NAL9602] Data Fault, FailCount= 3
2018-02-26T19:04:02.810Z,1519671842.810 [NAL9602](ERROR): Data Fault
2018-02-26T19:04:02.906Z,1519671842.906 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T19:04:03.205Z,1519671843.205 [NAL9602](INFO): Powering down
2018-02-26T19:04:04.071Z,1519671844.071 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T19:04:04.071Z,1519671844.071 [NAL9602] No Fault, FailCount= 3
2018-02-26T19:04:08.438Z,1519671848.438 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:04:08.438Z,1519671848.438 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-02-26T19:04:08.438Z,1519671848.438 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:04:08.439Z,1519671848.439 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:04:08.439Z,1519671848.439 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-02-26T19:04:08.440Z,1519671848.440 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:04:08.451Z,1519671848.451 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:04:08.452Z,1519671848.452 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:04:08.852Z,1519671848.852 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:04:08.852Z,1519671848.852 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-02-26T19:04:08.853Z,1519671848.853 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:04:08.853Z,1519671848.853 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-02-26T19:04:09.238Z,1519671849.238 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:04:09.238Z,1519671849.238 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:04:09.239Z,1519671849.239 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:04:09.239Z,1519671849.239 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:04:09.239Z,1519671849.239 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:04:09.240Z,1519671849.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:04:33.602Z,1519671873.602 [NAL9602](INFO): Powering up NAL9602
2018-02-26T19:04:44.402Z,1519671884.402 [NAL9602](INFO): NAL9602 initialized
2018-02-26T19:06:45.594Z,1519672005.594 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T19:06:57.989Z,1519672017.989 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T19:01:57.7Z
2018-02-26T19:06:57.989Z,1519672017.989 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T19:06:57.989Z,1519672017.989 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T19:07:02.699Z,1519672022.699 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0036.lzma
2018-02-26T19:07:03.497Z,1519672023.497 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0036.lzma.bak
2018-02-26T19:07:03.497Z,1519672023.497 [DataOverHttps](INFO): SBD MOMSN=7869080
2018-02-26T19:07:09.506Z,1519672029.506 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:07:09.506Z,1519672029.506 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-02-26T19:07:09.506Z,1519672029.506 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:07:09.508Z,1519672029.508 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:07:09.508Z,1519672029.508 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-02-26T19:07:09.508Z,1519672029.508 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:07:09.553Z,1519672029.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:07:09.553Z,1519672029.553 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:07:12.609Z,1519672032.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:07:12.609Z,1519672032.609 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-02-26T19:07:12.609Z,1519672032.609 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:07:12.610Z,1519672032.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-02-26T19:07:12.742Z,1519672032.742 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:07:12.742Z,1519672032.742 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:07:12.742Z,1519672032.742 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:07:12.743Z,1519672032.743 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:07:12.743Z,1519672032.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:07:12.743Z,1519672032.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:07:13.019Z,1519672033.019 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180226T173634/Express0037.lzma
2018-02-26T19:07:13.817Z,1519672033.817 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0037.lzma.bak
2018-02-26T19:07:13.817Z,1519672033.817 [DataOverHttps](INFO): SBD MOMSN=7869082
2018-02-26T19:07:14.272Z,1519672034.272 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T19:07:14.272Z,1519672034.272 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T19:07:14.273Z,1519672034.273 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T19:09:19.775Z,1519672159.775 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.379511 seconds old.
2018-02-26T19:09:19.776Z,1519672159.776 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.379913 seconds old.
2018-02-26T19:09:20.164Z,1519672160.164 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.768401 seconds old.
2018-02-26T19:09:20.165Z,1519672160.165 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.769061 seconds old.
2018-02-26T19:09:20.573Z,1519672160.573 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.178279 seconds old.
2018-02-26T19:09:20.574Z,1519672160.574 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.178691 seconds old.
2018-02-26T19:09:20.982Z,1519672160.982 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.586705 seconds old.
2018-02-26T19:09:20.983Z,1519672160.983 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.587100 seconds old.
2018-02-26T19:10:12.977Z,1519672212.977 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:10:12.977Z,1519672212.977 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-02-26T19:10:12.977Z,1519672212.977 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:10:12.978Z,1519672212.978 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:10:12.979Z,1519672212.979 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-02-26T19:10:12.979Z,1519672212.979 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:10:12.990Z,1519672212.990 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:10:12.990Z,1519672212.990 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:10:13.383Z,1519672213.383 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:10:13.383Z,1519672213.383 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-02-26T19:10:13.383Z,1519672213.383 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:10:13.383Z,1519672213.383 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-02-26T19:10:13.770Z,1519672213.770 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:10:13.771Z,1519672213.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:10:13.771Z,1519672213.771 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:10:13.772Z,1519672213.772 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:10:13.773Z,1519672213.773 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:10:13.773Z,1519672213.773 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:12:14.910Z,1519672334.910 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T19:12:14.910Z,1519672334.910 [Default:CheckIn:C.Wait] Stopped
2018-02-26T19:12:14.910Z,1519672334.910 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T19:12:14.910Z,1519672334.910 [Default:CheckIn:D] Running Loop=1
2018-02-26T19:12:15.307Z,1519672335.307 [Default:CheckIn:D] Stopped
2018-02-26T19:12:15.307Z,1519672335.307 [Default:CheckIn:E] Running Loop=1
2018-02-26T19:12:15.725Z,1519672335.725 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 92.824146 min 
2018-02-26T19:12:15.725Z,1519672335.725 [Default:CheckIn:E] Stopped
2018-02-26T19:12:15.725Z,1519672335.725 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T19:12:15.725Z,1519672335.725 [Default:CheckIn] Stopped
2018-02-26T19:12:15.725Z,1519672335.725 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T19:12:15.725Z,1519672335.725 [Default:CheckIn](INFO): Running loop #10
2018-02-26T19:12:15.725Z,1519672335.725 [Default:CheckIn] Running Loop=10
2018-02-26T19:12:15.726Z,1519672335.726 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T19:12:15.726Z,1519672335.726 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T19:13:14.109Z,1519672394.109 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:13:14.109Z,1519672394.109 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-02-26T19:13:14.109Z,1519672394.109 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:13:14.111Z,1519672394.111 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:13:14.111Z,1519672394.111 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-02-26T19:13:14.111Z,1519672394.111 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:13:14.123Z,1519672394.123 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:13:14.123Z,1519672394.123 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:13:14.539Z,1519672394.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:13:14.540Z,1519672394.540 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-02-26T19:13:14.544Z,1519672394.544 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:13:14.544Z,1519672394.544 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-02-26T19:13:14.910Z,1519672394.910 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:13:14.910Z,1519672394.910 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:13:14.910Z,1519672394.910 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:13:14.911Z,1519672394.911 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:13:14.911Z,1519672394.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:13:14.911Z,1519672394.911 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:14:45.238Z,1519672485.238 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T19:14:45.238Z,1519672485.238 [NAL9602] Data Fault, FailCount= 4
2018-02-26T19:14:45.238Z,1519672485.238 [NAL9602](ERROR): Data Fault
2018-02-26T19:14:45.328Z,1519672485.328 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T19:14:45.642Z,1519672485.642 [NAL9602](INFO): Powering down
2018-02-26T19:14:46.489Z,1519672486.489 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T19:14:46.490Z,1519672486.490 [NAL9602] No Fault, FailCount= 4
2018-02-26T19:15:16.038Z,1519672516.038 [NAL9602](INFO): Powering up NAL9602
2018-02-26T19:15:27.206Z,1519672527.206 [NAL9602](INFO): NAL9602 initialized
2018-02-26T19:16:15.250Z,1519672575.250 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:16:15.250Z,1519672575.250 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-02-26T19:16:15.250Z,1519672575.250 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:16:15.256Z,1519672575.256 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:16:15.256Z,1519672575.256 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-02-26T19:16:15.256Z,1519672575.256 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:16:15.281Z,1519672575.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:16:15.282Z,1519672575.282 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:16:15.661Z,1519672575.661 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:16:15.661Z,1519672575.661 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-02-26T19:16:15.662Z,1519672575.662 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:16:15.662Z,1519672575.662 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-02-26T19:16:16.057Z,1519672576.057 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:16:16.057Z,1519672576.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:16:16.057Z,1519672576.057 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:16:16.058Z,1519672576.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:16:16.058Z,1519672576.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:16:16.059Z,1519672576.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:16:45.682Z,1519672605.682 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T19:17:16.040Z,1519672636.040 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T19:12:15.7Z
2018-02-26T19:17:16.040Z,1519672636.040 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T19:17:16.040Z,1519672636.040 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T19:17:20.350Z,1519672640.350 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0040.lzma
2018-02-26T19:17:21.149Z,1519672641.149 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0040.lzma.bak
2018-02-26T19:17:21.149Z,1519672641.149 [DataOverHttps](INFO): SBD MOMSN=7869086
2018-02-26T19:17:30.291Z,1519672650.291 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180226T173634/Express0041.lzma
2018-02-26T19:17:31.073Z,1519672651.073 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0041.lzma.bak
2018-02-26T19:17:31.073Z,1519672651.073 [DataOverHttps](INFO): SBD MOMSN=7869088
2018-02-26T19:17:31.547Z,1519672651.547 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T19:17:31.547Z,1519672651.547 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T19:17:31.547Z,1519672651.547 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T19:19:16.263Z,1519672756.263 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:19:16.263Z,1519672756.263 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-02-26T19:19:16.263Z,1519672756.263 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:19:16.265Z,1519672756.265 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:19:16.266Z,1519672756.266 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-02-26T19:19:16.266Z,1519672756.266 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:19:16.285Z,1519672756.285 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:19:16.286Z,1519672756.286 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:19:16.676Z,1519672756.676 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:19:16.676Z,1519672756.676 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-02-26T19:19:16.677Z,1519672756.677 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:19:16.677Z,1519672756.677 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-02-26T19:19:17.074Z,1519672757.074 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:19:17.074Z,1519672757.074 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:19:17.075Z,1519672757.075 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:19:17.075Z,1519672757.075 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:19:17.075Z,1519672757.075 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:19:17.076Z,1519672757.076 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:22:17.080Z,1519672937.080 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:22:17.081Z,1519672937.081 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-02-26T19:22:17.081Z,1519672937.081 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:22:17.082Z,1519672937.082 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:22:17.082Z,1519672937.082 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-02-26T19:22:17.082Z,1519672937.082 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:22:17.094Z,1519672937.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:22:17.094Z,1519672937.094 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:22:17.497Z,1519672937.497 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:22:17.497Z,1519672937.497 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-02-26T19:22:17.498Z,1519672937.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:22:17.498Z,1519672937.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-02-26T19:22:17.854Z,1519672937.854 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:22:17.854Z,1519672937.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:22:17.854Z,1519672937.854 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:22:17.855Z,1519672937.855 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:22:17.855Z,1519672937.855 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:22:17.855Z,1519672937.855 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:22:32.264Z,1519672952.264 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T19:22:32.265Z,1519672952.265 [Default:CheckIn:C.Wait] Stopped
2018-02-26T19:22:32.265Z,1519672952.265 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T19:22:32.265Z,1519672952.265 [Default:CheckIn:D] Running Loop=1
2018-02-26T19:22:32.668Z,1519672952.668 [Default:CheckIn:D] Stopped
2018-02-26T19:22:32.668Z,1519672952.668 [Default:CheckIn:E] Running Loop=1
2018-02-26T19:22:33.065Z,1519672953.065 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.113493 min 
2018-02-26T19:22:33.065Z,1519672953.065 [Default:CheckIn:E] Stopped
2018-02-26T19:22:33.065Z,1519672953.065 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T19:22:33.066Z,1519672953.066 [Default:CheckIn] Stopped
2018-02-26T19:22:33.066Z,1519672953.066 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T19:22:33.066Z,1519672953.066 [Default:CheckIn](INFO): Running loop #11
2018-02-26T19:22:33.066Z,1519672953.066 [Default:CheckIn] Running Loop=11
2018-02-26T19:22:33.066Z,1519672953.066 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T19:22:33.066Z,1519672953.066 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T19:25:18.256Z,1519673118.256 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:25:18.257Z,1519673118.257 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-02-26T19:25:18.257Z,1519673118.257 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:25:18.258Z,1519673118.258 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:25:18.258Z,1519673118.258 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-02-26T19:25:18.258Z,1519673118.258 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:25:18.278Z,1519673118.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:25:18.279Z,1519673118.279 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:25:18.654Z,1519673118.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:25:18.654Z,1519673118.654 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-02-26T19:25:18.655Z,1519673118.655 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:25:18.655Z,1519673118.655 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-02-26T19:25:19.041Z,1519673119.041 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:25:19.041Z,1519673119.041 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:25:19.041Z,1519673119.041 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:25:19.042Z,1519673119.042 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:25:19.042Z,1519673119.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:25:19.042Z,1519673119.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:25:29.794Z,1519673129.794 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T19:25:29.794Z,1519673129.794 [NAL9602] Data Fault, FailCount= 5
2018-02-26T19:25:29.794Z,1519673129.794 [NAL9602](ERROR): Data Fault
2018-02-26T19:25:29.866Z,1519673129.866 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T19:25:29.866Z,1519673129.866 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-02-26T19:25:30.194Z,1519673130.194 [NAL9602](INFO): Powering down
2018-02-26T19:25:30.269Z,1519673130.269 [CBIT](INFO): Critical error at 20180226T192529
2018-02-26T19:26:45.796Z,1519673205.796 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T19:27:30.165Z,1519673250.165 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T19:27:30.166Z,1519673250.165 [NAL9602] No Fault, FailCount= 5
2018-02-26T19:27:30.506Z,1519673250.506 [NAL9602](INFO): Powering up NAL9602
2018-02-26T19:27:33.349Z,1519673253.349 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T19:22:33.1Z
2018-02-26T19:27:33.349Z,1519673253.349 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T19:27:33.349Z,1519673253.349 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T19:27:38.075Z,1519673258.075 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180226T173634/Courier0044.lzma
2018-02-26T19:27:38.873Z,1519673258.873 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0044.lzma.bak
2018-02-26T19:27:38.873Z,1519673258.873 [DataOverHttps](INFO): SBD MOMSN=7869092
2018-02-26T19:27:43.234Z,1519673263.234 [NAL9602](INFO): NAL9602 initialized
2018-02-26T19:27:48.387Z,1519673268.387 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0045.lzma
2018-02-26T19:27:49.185Z,1519673269.185 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0045.lzma.bak
2018-02-26T19:27:49.185Z,1519673269.185 [DataOverHttps](INFO): SBD MOMSN=7869095
2018-02-26T19:27:49.634Z,1519673269.634 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T19:27:49.634Z,1519673269.634 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T19:27:49.634Z,1519673269.634 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T19:28:19.182Z,1519673299.182 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:28:19.182Z,1519673299.182 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-02-26T19:28:19.182Z,1519673299.182 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:28:19.184Z,1519673299.184 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:28:19.184Z,1519673299.184 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-02-26T19:28:19.184Z,1519673299.184 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:28:19.225Z,1519673299.225 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:28:19.225Z,1519673299.225 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:28:19.625Z,1519673299.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:28:19.626Z,1519673299.626 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-02-26T19:28:19.626Z,1519673299.626 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:28:19.626Z,1519673299.626 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-02-26T19:28:19.985Z,1519673299.985 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:28:19.985Z,1519673299.985 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:28:19.986Z,1519673299.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:28:19.986Z,1519673299.986 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:28:19.986Z,1519673299.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:28:19.987Z,1519673299.987 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:31:20.337Z,1519673480.337 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:31:20.337Z,1519673480.337 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-02-26T19:31:20.337Z,1519673480.337 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:31:20.339Z,1519673480.339 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:31:20.339Z,1519673480.339 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-02-26T19:31:20.339Z,1519673480.339 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:31:20.351Z,1519673480.351 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:31:20.351Z,1519673480.351 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:31:20.749Z,1519673480.749 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:31:20.749Z,1519673480.749 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-02-26T19:31:20.749Z,1519673480.749 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:31:20.749Z,1519673480.749 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-02-26T19:31:21.135Z,1519673481.135 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:31:21.136Z,1519673481.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:31:21.136Z,1519673481.136 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:31:21.136Z,1519673481.136 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:31:21.137Z,1519673481.137 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:31:21.137Z,1519673481.137 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:32:50.308Z,1519673570.308 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T19:32:50.308Z,1519673570.308 [Default:CheckIn:C.Wait] Stopped
2018-02-26T19:32:50.308Z,1519673570.308 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T19:32:50.308Z,1519673570.308 [Default:CheckIn:D] Running Loop=1
2018-02-26T19:32:50.712Z,1519673570.712 [Default:CheckIn:D] Stopped
2018-02-26T19:32:50.712Z,1519673570.712 [Default:CheckIn:E] Running Loop=1
2018-02-26T19:32:51.114Z,1519673571.114 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.414233 min 
2018-02-26T19:32:51.114Z,1519673571.114 [Default:CheckIn:E] Stopped
2018-02-26T19:32:51.114Z,1519673571.114 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T19:32:51.114Z,1519673571.114 [Default:CheckIn] Stopped
2018-02-26T19:32:51.114Z,1519673571.114 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T19:32:51.114Z,1519673571.114 [Default:CheckIn](INFO): Running loop #12
2018-02-26T19:32:51.115Z,1519673571.115 [Default:CheckIn] Running Loop=12
2018-02-26T19:32:51.115Z,1519673571.115 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T19:32:51.115Z,1519673571.115 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T19:34:21.433Z,1519673661.433 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:34:21.433Z,1519673661.433 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-02-26T19:34:21.433Z,1519673661.433 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:34:21.434Z,1519673661.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:34:21.434Z,1519673661.434 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-02-26T19:34:21.434Z,1519673661.434 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:34:21.462Z,1519673661.462 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:34:21.463Z,1519673661.463 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:34:21.869Z,1519673661.869 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:34:21.869Z,1519673661.869 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-02-26T19:34:21.870Z,1519673661.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:34:21.870Z,1519673661.870 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-02-26T19:34:22.241Z,1519673662.241 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:34:22.242Z,1519673662.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:34:22.242Z,1519673662.242 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:34:22.243Z,1519673662.243 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:34:22.243Z,1519673662.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:34:22.243Z,1519673662.243 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:36:22.191Z,1519673782.191 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.398181 seconds old.
2018-02-26T19:36:22.193Z,1519673782.193 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.398741 seconds old.
2018-02-26T19:36:22.601Z,1519673782.601 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.807419 seconds old.
2018-02-26T19:36:22.602Z,1519673782.602 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.807856 seconds old.
2018-02-26T19:36:22.998Z,1519673782.998 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.204733 seconds old.
2018-02-26T19:36:22.999Z,1519673782.999 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.205120 seconds old.
2018-02-26T19:36:23.388Z,1519673783.388 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.595088 seconds old.
2018-02-26T19:36:23.389Z,1519673783.389 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.595486 seconds old.
2018-02-26T19:36:23.798Z,1519673783.798 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.005168 seconds old.
2018-02-26T19:36:23.799Z,1519673783.799 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.005580 seconds old.
2018-02-26T19:36:24.211Z,1519673784.211 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.417915 seconds old.
2018-02-26T19:36:24.212Z,1519673784.212 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.418514 seconds old.
2018-02-26T19:36:24.577Z,1519673784.577 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.784116 seconds old.
2018-02-26T19:36:24.578Z,1519673784.578 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.784502 seconds old.
2018-02-26T19:36:24.983Z,1519673784.983 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.189784 seconds old.
2018-02-26T19:36:24.984Z,1519673784.984 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.190183 seconds old.
2018-02-26T19:36:25.436Z,1519673785.436 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.638869 seconds old.
2018-02-26T19:36:25.438Z,1519673785.438 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.643825 seconds old.
2018-02-26T19:36:25.797Z,1519673785.797 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.004088 seconds old.
2018-02-26T19:36:25.798Z,1519673785.798 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.004478 seconds old.
2018-02-26T19:36:26.193Z,1519673786.193 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.400250 seconds old.
2018-02-26T19:36:26.194Z,1519673786.194 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.400636 seconds old.
2018-02-26T19:36:26.577Z,1519673786.577 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.784365 seconds old.
2018-02-26T19:36:26.579Z,1519673786.579 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.784778 seconds old.
2018-02-26T19:36:26.977Z,1519673786.977 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.184274 seconds old.
2018-02-26T19:36:26.978Z,1519673786.978 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.184671 seconds old.
2018-02-26T19:36:27.385Z,1519673787.385 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.592327 seconds old.
2018-02-26T19:36:27.387Z,1519673787.387 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.592722 seconds old.
2018-02-26T19:36:27.780Z,1519673787.780 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.986662 seconds old.
2018-02-26T19:36:27.781Z,1519673787.781 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.987287 seconds old.
2018-02-26T19:36:28.194Z,1519673788.194 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.401157 seconds old.
2018-02-26T19:36:28.195Z,1519673788.195 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.401562 seconds old.
2018-02-26T19:36:28.587Z,1519673788.587 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.794206 seconds old.
2018-02-26T19:36:28.593Z,1519673788.593 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.798792 seconds old.
2018-02-26T19:36:28.994Z,1519673788.994 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.200379 seconds old.
2018-02-26T19:36:28.995Z,1519673788.995 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.200769 seconds old.
2018-02-26T19:36:29.384Z,1519673789.384 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.590838 seconds old.
2018-02-26T19:36:29.385Z,1519673789.385 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.591318 seconds old.
2018-02-26T19:36:29.775Z,1519673789.775 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.981885 seconds old.
2018-02-26T19:36:29.780Z,1519673789.780 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.986467 seconds old.
2018-02-26T19:36:30.178Z,1519673790.178 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.385145 seconds old.
2018-02-26T19:36:30.179Z,1519673790.179 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.385559 seconds old.
2018-02-26T19:36:30.591Z,1519673790.591 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.798322 seconds old.
2018-02-26T19:36:30.593Z,1519673790.593 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.798811 seconds old.
2018-02-26T19:36:30.966Z,1519673790.966 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.172465 seconds old.
2018-02-26T19:36:30.967Z,1519673790.967 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.172869 seconds old.
2018-02-26T19:36:31.397Z,1519673791.397 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.603363 seconds old.
2018-02-26T19:36:31.398Z,1519673791.398 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.603783 seconds old.
2018-02-26T19:36:31.796Z,1519673791.796 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.002801 seconds old.
2018-02-26T19:36:31.797Z,1519673791.797 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.003325 seconds old.
2018-02-26T19:36:32.192Z,1519673792.192 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.398432 seconds old.
2018-02-26T19:36:32.193Z,1519673792.193 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.399072 seconds old.
2018-02-26T19:36:32.569Z,1519673792.569 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.775613 seconds old.
2018-02-26T19:36:32.570Z,1519673792.570 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.776044 seconds old.
2018-02-26T19:36:32.974Z,1519673792.974 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.180740 seconds old.
2018-02-26T19:36:32.975Z,1519673792.975 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.181175 seconds old.
2018-02-26T19:36:33.367Z,1519673793.367 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.574223 seconds old.
2018-02-26T19:36:33.369Z,1519673793.369 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.574865 seconds old.
2018-02-26T19:36:33.774Z,1519673793.774 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.980528 seconds old.
2018-02-26T19:36:33.775Z,1519673793.775 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.980979 seconds old.
2018-02-26T19:36:34.185Z,1519673794.185 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.392012 seconds old.
2018-02-26T19:36:34.186Z,1519673794.186 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.392437 seconds old.
2018-02-26T19:36:34.579Z,1519673794.579 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.785371 seconds old.
2018-02-26T19:36:34.580Z,1519673794.580 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.785814 seconds old.
2018-02-26T19:36:34.978Z,1519673794.978 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.185291 seconds old.
2018-02-26T19:36:34.980Z,1519673794.980 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.185732 seconds old.
2018-02-26T19:36:35.369Z,1519673795.369 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.576301 seconds old.
2018-02-26T19:36:35.371Z,1519673795.371 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.576736 seconds old.
2018-02-26T19:36:35.784Z,1519673795.784 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 13.990561 seconds old.
2018-02-26T19:36:35.785Z,1519673795.785 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 13.991209 seconds old.
2018-02-26T19:36:36.181Z,1519673796.181 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.387786 seconds old.
2018-02-26T19:36:36.182Z,1519673796.182 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.388219 seconds old.
2018-02-26T19:36:36.581Z,1519673796.581 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 14.787937 seconds old.
2018-02-26T19:36:36.582Z,1519673796.582 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 14.788372 seconds old.
2018-02-26T19:36:36.980Z,1519673796.980 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.186445 seconds old.
2018-02-26T19:36:36.981Z,1519673796.981 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.187104 seconds old.
2018-02-26T19:36:37.381Z,1519673797.381 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.588281 seconds old.
2018-02-26T19:36:37.383Z,1519673797.383 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.588715 seconds old.
2018-02-26T19:36:37.789Z,1519673797.789 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 15.995999 seconds old.
2018-02-26T19:36:37.790Z,1519673797.790 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 15.996440 seconds old.
2018-02-26T19:36:38.181Z,1519673798.181 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.387376 seconds old.
2018-02-26T19:36:38.182Z,1519673798.182 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.387835 seconds old.
2018-02-26T19:36:38.581Z,1519673798.581 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 16.787523 seconds old.
2018-02-26T19:36:38.582Z,1519673798.582 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 16.787973 seconds old.
2018-02-26T19:36:38.972Z,1519673798.972 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.178866 seconds old.
2018-02-26T19:36:38.973Z,1519673798.973 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.179380 seconds old.
2018-02-26T19:36:39.373Z,1519673799.373 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.579851 seconds old.
2018-02-26T19:36:39.374Z,1519673799.374 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.580293 seconds old.
2018-02-26T19:36:39.781Z,1519673799.781 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 17.987434 seconds old.
2018-02-26T19:36:39.782Z,1519673799.782 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 17.987884 seconds old.
2018-02-26T19:36:40.182Z,1519673800.182 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.388468 seconds old.
2018-02-26T19:36:40.183Z,1519673800.183 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.388900 seconds old.
2018-02-26T19:36:40.598Z,1519673800.598 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 18.804788 seconds old.
2018-02-26T19:36:40.599Z,1519673800.599 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 18.805225 seconds old.
2018-02-26T19:36:40.980Z,1519673800.980 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.182727 seconds old.
2018-02-26T19:36:40.981Z,1519673800.981 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.187399 seconds old.
2018-02-26T19:36:41.380Z,1519673801.380 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.587140 seconds old.
2018-02-26T19:36:41.381Z,1519673801.381 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.587580 seconds old.
2018-02-26T19:36:41.770Z,1519673801.770 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 19.976687 seconds old.
2018-02-26T19:36:41.771Z,1519673801.771 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 19.977131 seconds old.
2018-02-26T19:36:42.175Z,1519673802.175 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.382074 seconds old.
2018-02-26T19:36:42.177Z,1519673802.177 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.382700 seconds old.
2018-02-26T19:36:42.582Z,1519673802.582 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 20.788542 seconds old.
2018-02-26T19:36:42.583Z,1519673802.583 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 20.788977 seconds old.
2018-02-26T19:36:42.977Z,1519673802.977 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.183747 seconds old.
2018-02-26T19:36:42.978Z,1519673802.978 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.184181 seconds old.
2018-02-26T19:36:43.386Z,1519673803.386 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.592940 seconds old.
2018-02-26T19:36:43.387Z,1519673803.387 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 21.593383 seconds old.
2018-02-26T19:36:43.793Z,1519673803.793 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 21.999981 seconds old.
2018-02-26T19:36:43.794Z,1519673803.794 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.000410 seconds old.
2018-02-26T19:36:44.181Z,1519673804.181 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.388165 seconds old.
2018-02-26T19:36:44.182Z,1519673804.182 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.388601 seconds old.
2018-02-26T19:36:44.572Z,1519673804.572 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 22.778791 seconds old.
2018-02-26T19:36:44.573Z,1519673804.573 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 22.779472 seconds old.
2018-02-26T19:36:44.979Z,1519673804.979 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.186290 seconds old.
2018-02-26T19:36:44.981Z,1519673804.981 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.186803 seconds old.
2018-02-26T19:36:45.375Z,1519673805.375 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.581683 seconds old.
2018-02-26T19:36:45.376Z,1519673805.376 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.582097 seconds old.
2018-02-26T19:36:45.782Z,1519673805.782 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 23.988744 seconds old.
2018-02-26T19:36:45.783Z,1519673805.783 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 23.989162 seconds old.
2018-02-26T19:36:46.190Z,1519673806.190 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.396638 seconds old.
2018-02-26T19:36:46.191Z,1519673806.191 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.397055 seconds old.
2018-02-26T19:36:46.202Z,1519673806.202 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T19:36:46.591Z,1519673806.591 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 24.798317 seconds old.
2018-02-26T19:36:46.593Z,1519673806.593 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 24.798953 seconds old.
2018-02-26T19:36:46.987Z,1519673806.987 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.194117 seconds old.
2018-02-26T19:36:46.993Z,1519673806.993 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.198725 seconds old.
2018-02-26T19:36:47.382Z,1519673807.382 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.588861 seconds old.
2018-02-26T19:36:47.383Z,1519673807.383 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.589275 seconds old.
2018-02-26T19:36:47.771Z,1519673807.771 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 25.977555 seconds old.
2018-02-26T19:36:47.776Z,1519673807.776 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 25.977985 seconds old.
2018-02-26T19:36:48.189Z,1519673808.189 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.395819 seconds old.
2018-02-26T19:36:48.190Z,1519673808.190 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.396252 seconds old.
2018-02-26T19:36:48.584Z,1519673808.584 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 26.790843 seconds old.
2018-02-26T19:36:48.585Z,1519673808.585 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 26.791347 seconds old.
2018-02-26T19:36:48.964Z,1519673808.964 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.170465 seconds old.
2018-02-26T19:36:48.981Z,1519673808.981 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.187102 seconds old.
2018-02-26T19:36:49.384Z,1519673809.384 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.590588 seconds old.
2018-02-26T19:36:49.385Z,1519673809.385 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.591224 seconds old.
2018-02-26T19:36:49.792Z,1519673809.792 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 27.998906 seconds old.
2018-02-26T19:36:49.793Z,1519673809.793 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 27.999415 seconds old.
2018-02-26T19:36:50.193Z,1519673810.193 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.399482 seconds old.
2018-02-26T19:36:50.194Z,1519673810.194 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.399917 seconds old.
2018-02-26T19:36:50.563Z,1519673810.563 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 28.770339 seconds old.
2018-02-26T19:36:50.565Z,1519673810.565 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 28.771023 seconds old.
2018-02-26T19:36:50.969Z,1519673810.969 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.175981 seconds old.
2018-02-26T19:36:50.970Z,1519673810.970 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.176398 seconds old.
2018-02-26T19:36:51.363Z,1519673811.363 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.570060 seconds old.
2018-02-26T19:36:51.364Z,1519673811.364 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.570672 seconds old.
2018-02-26T19:36:51.769Z,1519673811.769 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 29.975515 seconds old.
2018-02-26T19:36:51.770Z,1519673811.770 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 29.975925 seconds old.
2018-02-26T19:36:52.199Z,1519673812.199 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.405767 seconds old.
2018-02-26T19:36:52.200Z,1519673812.200 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.406189 seconds old.
2018-02-26T19:36:52.598Z,1519673812.598 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 30.804566 seconds old.
2018-02-26T19:36:52.599Z,1519673812.599 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 30.804987 seconds old.
2018-02-26T19:36:52.991Z,1519673812.991 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.197862 seconds old.
2018-02-26T19:36:52.996Z,1519673812.996 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.202474 seconds old.
2018-02-26T19:36:53.373Z,1519673813.373 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 31.580132 seconds old.
2018-02-26T19:36:53.374Z,1519673813.374 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 31.580562 seconds old.
2018-02-26T19:36:56.467Z,1519673816.467 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.674113 seconds old.
2018-02-26T19:36:56.469Z,1519673816.469 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.674758 seconds old.
2018-02-26T19:36:56.581Z,1519673816.581 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 34.788273 seconds old.
2018-02-26T19:36:56.583Z,1519673816.583 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 34.788719 seconds old.
2018-02-26T19:36:56.957Z,1519673816.957 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 35.163472 seconds old.
2018-02-26T19:36:56.958Z,1519673816.958 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 35.164344 seconds old.
2018-02-26T19:37:22.558Z,1519673842.558 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:37:22.558Z,1519673842.558 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-02-26T19:37:22.558Z,1519673842.558 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:37:22.573Z,1519673842.573 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:37:22.573Z,1519673842.573 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-02-26T19:37:22.573Z,1519673842.573 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:37:22.601Z,1519673842.601 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:37:22.601Z,1519673842.601 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:37:22.953Z,1519673842.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:37:22.953Z,1519673842.953 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-02-26T19:37:22.954Z,1519673842.954 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:37:22.954Z,1519673842.954 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-02-26T19:37:23.353Z,1519673843.353 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:37:23.353Z,1519673843.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:37:23.353Z,1519673843.353 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:37:23.354Z,1519673843.354 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:37:23.354Z,1519673843.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:37:23.354Z,1519673843.354 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:37:44.090Z,1519673864.090 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T19:37:44.090Z,1519673864.090 [NAL9602] Data Fault, FailCount= 1
2018-02-26T19:37:44.090Z,1519673864.090 [NAL9602](ERROR): Data Fault
2018-02-26T19:37:44.180Z,1519673864.180 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T19:37:44.489Z,1519673864.489 [NAL9602](INFO): Powering down
2018-02-26T19:37:45.351Z,1519673865.351 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T19:37:45.351Z,1519673865.351 [NAL9602] No Fault, FailCount= 1
2018-02-26T19:37:51.327Z,1519673871.327 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T19:32:51.1Z
2018-02-26T19:37:51.327Z,1519673871.327 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T19:37:51.327Z,1519673871.327 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T19:37:56.047Z,1519673876.047 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0048.lzma
2018-02-26T19:37:56.845Z,1519673876.845 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0048.lzma.bak
2018-02-26T19:37:56.845Z,1519673876.845 [DataOverHttps](INFO): SBD MOMSN=7869099
2018-02-26T19:38:06.363Z,1519673886.363 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0049.lzma
2018-02-26T19:38:07.161Z,1519673887.161 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0049.lzma.bak
2018-02-26T19:38:07.161Z,1519673887.161 [DataOverHttps](INFO): SBD MOMSN=7869101
2018-02-26T19:38:07.613Z,1519673887.613 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T19:38:07.613Z,1519673887.613 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T19:38:07.613Z,1519673887.613 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T19:38:14.733Z,1519673894.733 [NAL9602](INFO): Powering up NAL9602
2018-02-26T19:38:25.926Z,1519673905.926 [NAL9602](INFO): NAL9602 initialized
2018-02-26T19:40:23.595Z,1519674023.595 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:40:23.596Z,1519674023.596 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-02-26T19:40:23.596Z,1519674023.596 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:40:23.602Z,1519674023.602 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:40:23.602Z,1519674023.602 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-02-26T19:40:23.602Z,1519674023.602 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:40:23.675Z,1519674023.675 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:40:23.675Z,1519674023.675 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:40:24.066Z,1519674024.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:40:24.066Z,1519674024.066 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-02-26T19:40:24.066Z,1519674024.066 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:40:24.066Z,1519674024.066 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-02-26T19:40:24.378Z,1519674024.378 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:40:24.378Z,1519674024.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:40:24.378Z,1519674024.378 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:40:24.379Z,1519674024.379 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:40:24.379Z,1519674024.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:40:24.379Z,1519674024.379 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:43:08.276Z,1519674188.276 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T19:43:08.276Z,1519674188.276 [Default:CheckIn:C.Wait] Stopped
2018-02-26T19:43:08.276Z,1519674188.276 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T19:43:08.276Z,1519674188.276 [Default:CheckIn:D] Running Loop=1
2018-02-26T19:43:08.672Z,1519674188.672 [Default:CheckIn:D] Stopped
2018-02-26T19:43:08.672Z,1519674188.672 [Default:CheckIn:E] Running Loop=1
2018-02-26T19:43:09.080Z,1519674189.080 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 123.713566 min 
2018-02-26T19:43:09.081Z,1519674189.081 [Default:CheckIn:E] Stopped
2018-02-26T19:43:09.081Z,1519674189.081 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T19:43:09.081Z,1519674189.081 [Default:CheckIn] Stopped
2018-02-26T19:43:09.081Z,1519674189.081 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T19:43:09.081Z,1519674189.081 [Default:CheckIn](INFO): Running loop #13
2018-02-26T19:43:09.081Z,1519674189.081 [Default:CheckIn] Running Loop=13
2018-02-26T19:43:09.081Z,1519674189.081 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T19:43:09.081Z,1519674189.081 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T19:43:24.646Z,1519674204.646 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:43:24.646Z,1519674204.646 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-02-26T19:43:24.646Z,1519674204.646 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:43:24.647Z,1519674204.647 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:43:24.648Z,1519674204.648 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-02-26T19:43:24.648Z,1519674204.648 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:43:24.659Z,1519674204.659 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:43:24.660Z,1519674204.660 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:43:25.056Z,1519674205.056 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:43:25.056Z,1519674205.056 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-02-26T19:43:25.056Z,1519674205.056 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:43:25.056Z,1519674205.056 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-02-26T19:43:25.453Z,1519674205.453 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:43:25.454Z,1519674205.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:43:25.454Z,1519674205.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:43:25.454Z,1519674205.454 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:43:25.455Z,1519674205.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:43:25.455Z,1519674205.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:46:25.800Z,1519674385.800 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:46:25.801Z,1519674385.801 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-02-26T19:46:25.801Z,1519674385.801 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:46:25.802Z,1519674385.802 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:46:25.802Z,1519674385.802 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-02-26T19:46:25.802Z,1519674385.802 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:46:25.819Z,1519674385.819 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:46:25.819Z,1519674385.819 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:46:26.218Z,1519674386.218 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:46:26.218Z,1519674386.218 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-02-26T19:46:26.218Z,1519674386.218 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:46:26.218Z,1519674386.218 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-02-26T19:46:26.578Z,1519674386.578 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:46:26.578Z,1519674386.578 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:46:26.579Z,1519674386.579 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:46:26.579Z,1519674386.579 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:46:26.580Z,1519674386.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:46:26.584Z,1519674386.584 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:46:46.215Z,1519674406.215 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T19:48:09.368Z,1519674489.368 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T19:43:09.1Z
2018-02-26T19:48:09.368Z,1519674489.368 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T19:48:09.368Z,1519674489.368 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T19:48:13.690Z,1519674493.690 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0052.lzma
2018-02-26T19:48:14.493Z,1519674494.493 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0052.lzma.bak
2018-02-26T19:48:14.494Z,1519674494.494 [DataOverHttps](INFO): SBD MOMSN=7869105
2018-02-26T19:48:14.562Z,1519674494.562 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.396414 seconds old.
2018-02-26T19:48:14.563Z,1519674494.563 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.396814 seconds old.
2018-02-26T19:48:14.966Z,1519674494.966 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.800153 seconds old.
2018-02-26T19:48:14.967Z,1519674494.967 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.800543 seconds old.
2018-02-26T19:48:15.343Z,1519674495.343 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.177157 seconds old.
2018-02-26T19:48:15.348Z,1519674495.348 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.177551 seconds old.
2018-02-26T19:48:23.980Z,1519674503.980 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180226T173634/Express0053.lzma
2018-02-26T19:48:24.773Z,1519674504.773 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0053.lzma.bak
2018-02-26T19:48:24.773Z,1519674504.773 [DataOverHttps](INFO): SBD MOMSN=7869107
2018-02-26T19:48:25.250Z,1519674505.250 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T19:48:25.250Z,1519674505.250 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T19:48:25.250Z,1519674505.250 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T19:48:29.170Z,1519674509.170 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T19:48:29.170Z,1519674509.170 [NAL9602] Data Fault, FailCount= 2
2018-02-26T19:48:29.170Z,1519674509.170 [NAL9602](ERROR): Data Fault
2018-02-26T19:48:29.247Z,1519674509.247 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T19:48:29.566Z,1519674509.566 [NAL9602](INFO): Powering down
2018-02-26T19:48:30.421Z,1519674510.421 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T19:48:30.421Z,1519674510.421 [NAL9602] No Fault, FailCount= 2
2018-02-26T19:48:59.962Z,1519674539.962 [NAL9602](INFO): Powering up NAL9602
2018-02-26T19:49:11.162Z,1519674551.162 [NAL9602](INFO): NAL9602 initialized
2018-02-26T19:49:29.111Z,1519674569.111 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:49:29.111Z,1519674569.111 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-02-26T19:49:29.111Z,1519674569.111 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:49:29.113Z,1519674569.113 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:49:29.113Z,1519674569.113 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-02-26T19:49:29.113Z,1519674569.113 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:49:29.149Z,1519674569.149 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:49:29.149Z,1519674569.149 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:49:29.267Z,1519674569.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T19:49:29.267Z,1519674569.267 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-02-26T19:49:29.268Z,1519674569.268 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T19:49:29.268Z,1519674569.268 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-02-26T19:49:29.614Z,1519674569.614 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T19:49:29.614Z,1519674569.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:49:29.614Z,1519674569.614 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:49:29.615Z,1519674569.615 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T19:49:29.615Z,1519674569.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T19:49:29.615Z,1519674569.615 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T19:52:30.262Z,1519674750.262 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:52:30.263Z,1519674750.263 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-02-26T19:52:30.263Z,1519674750.263 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T19:52:30.265Z,1519674750.265 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T19:52:30.265Z,1519674750.265 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-02-26T19:52:30.265Z,1519674750.265 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T19:52:30.278Z,1519674750.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:52:30.278Z,1519674750.278 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T19:52:30.278Z,1519674750.278 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:52:30.278Z,1519674750.278 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T19:53:25.948Z,1519674805.948 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T19:53:25.949Z,1519674805.949 [Default:CheckIn:C.Wait] Stopped
2018-02-26T19:53:25.949Z,1519674805.949 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T19:53:25.949Z,1519674805.949 [Default:CheckIn:D] Running Loop=1
2018-02-26T19:53:26.367Z,1519674806.367 [Default:CheckIn:D] Stopped
2018-02-26T19:53:26.367Z,1519674806.367 [Default:CheckIn:E] Running Loop=1
2018-02-26T19:53:26.737Z,1519674806.737 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.008480 min 
2018-02-26T19:53:26.738Z,1519674806.738 [Default:CheckIn:E] Stopped
2018-02-26T19:53:26.738Z,1519674806.738 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T19:53:26.738Z,1519674806.738 [Default:CheckIn] Stopped
2018-02-26T19:53:26.738Z,1519674806.738 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T19:53:26.738Z,1519674806.738 [Default:CheckIn](INFO): Running loop #14
2018-02-26T19:53:26.738Z,1519674806.738 [Default:CheckIn] Running Loop=14
2018-02-26T19:53:26.738Z,1519674806.738 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T19:53:26.738Z,1519674806.738 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T19:56:46.322Z,1519675006.322 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T19:58:27.099Z,1519675107.099 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T19:53:26.7Z
2018-02-26T19:58:27.099Z,1519675107.099 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T19:58:27.099Z,1519675107.099 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T19:58:31.422Z,1519675111.422 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0056.lzma
2018-02-26T19:58:32.221Z,1519675112.221 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0056.lzma.bak
2018-02-26T19:58:32.221Z,1519675112.221 [DataOverHttps](INFO): SBD MOMSN=7869111
2018-02-26T19:58:41.779Z,1519675121.779 [DataOverHttps](INFO): Sending 221 bytes from file Logs/20180226T173634/Express0057.lzma
2018-02-26T19:58:42.577Z,1519675122.577 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0057.lzma.bak
2018-02-26T19:58:42.577Z,1519675122.577 [DataOverHttps](INFO): SBD MOMSN=7869113
2018-02-26T19:58:43.030Z,1519675123.030 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T19:58:43.030Z,1519675123.030 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T19:58:43.030Z,1519675123.030 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T19:59:12.586Z,1519675152.586 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T19:59:12.586Z,1519675152.586 [NAL9602] Data Fault, FailCount= 3
2018-02-26T19:59:12.586Z,1519675152.586 [NAL9602](ERROR): Data Fault
2018-02-26T19:59:12.673Z,1519675152.673 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T19:59:12.986Z,1519675152.986 [NAL9602](INFO): Powering down
2018-02-26T19:59:13.838Z,1519675153.838 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T19:59:13.838Z,1519675153.838 [NAL9602] No Fault, FailCount= 3
2018-02-26T19:59:43.390Z,1519675183.390 [NAL9602](INFO): Powering up NAL9602
2018-02-26T19:59:54.561Z,1519675194.561 [NAL9602](INFO): NAL9602 initialized
2018-02-26T20:03:43.719Z,1519675423.719 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T20:03:43.719Z,1519675423.719 [Default:CheckIn:C.Wait] Stopped
2018-02-26T20:03:43.719Z,1519675423.719 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T20:03:43.719Z,1519675423.719 [Default:CheckIn:D] Running Loop=1
2018-02-26T20:03:44.117Z,1519675424.117 [Default:CheckIn:D] Stopped
2018-02-26T20:03:44.117Z,1519675424.117 [Default:CheckIn:E] Running Loop=1
2018-02-26T20:03:44.526Z,1519675424.526 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.304313 min 
2018-02-26T20:03:44.527Z,1519675424.527 [Default:CheckIn:E] Stopped
2018-02-26T20:03:44.527Z,1519675424.527 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T20:03:44.527Z,1519675424.527 [Default:CheckIn] Stopped
2018-02-26T20:03:44.527Z,1519675424.527 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T20:03:44.527Z,1519675424.527 [Default:CheckIn](INFO): Running loop #15
2018-02-26T20:03:44.527Z,1519675424.527 [Default:CheckIn] Running Loop=15
2018-02-26T20:03:44.527Z,1519675424.527 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T20:03:44.527Z,1519675424.527 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T20:06:46.478Z,1519675606.478 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T20:07:30.460Z,1519675650.460 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:07:30.460Z,1519675650.460 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-02-26T20:07:30.461Z,1519675650.461 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:07:30.461Z,1519675650.461 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-02-26T20:07:30.837Z,1519675650.837 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:07:30.838Z,1519675650.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:07:30.838Z,1519675650.838 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:07:30.838Z,1519675650.838 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:07:30.839Z,1519675650.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:07:30.839Z,1519675650.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:08:44.801Z,1519675724.801 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T20:03:44.5Z
2018-02-26T20:08:44.801Z,1519675724.801 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T20:08:44.801Z,1519675724.801 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T20:08:49.515Z,1519675729.515 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0060.lzma
2018-02-26T20:08:50.313Z,1519675730.313 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0060.lzma.bak
2018-02-26T20:08:50.313Z,1519675730.313 [DataOverHttps](INFO): SBD MOMSN=7869119
2018-02-26T20:08:59.478Z,1519675739.478 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0061.lzma
2018-02-26T20:09:00.269Z,1519675740.269 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0061.lzma.bak
2018-02-26T20:09:00.269Z,1519675740.269 [DataOverHttps](INFO): SBD MOMSN=7869121
2018-02-26T20:09:00.727Z,1519675740.727 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T20:09:00.727Z,1519675740.727 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T20:09:00.727Z,1519675740.727 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T20:09:55.438Z,1519675795.438 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T20:09:55.438Z,1519675795.438 [NAL9602] Data Fault, FailCount= 4
2018-02-26T20:09:55.438Z,1519675795.438 [NAL9602](ERROR): Data Fault
2018-02-26T20:09:55.518Z,1519675795.518 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T20:09:55.833Z,1519675795.833 [NAL9602](INFO): Powering down
2018-02-26T20:09:56.706Z,1519675796.706 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T20:09:56.706Z,1519675796.706 [NAL9602] No Fault, FailCount= 4
2018-02-26T20:10:26.190Z,1519675826.190 [NAL9602](INFO): Powering up NAL9602
2018-02-26T20:10:31.027Z,1519675831.027 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:10:31.027Z,1519675831.027 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-02-26T20:10:31.027Z,1519675831.027 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:10:31.029Z,1519675831.029 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:10:31.029Z,1519675831.029 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-02-26T20:10:31.029Z,1519675831.029 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:10:31.057Z,1519675831.057 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:10:31.058Z,1519675831.058 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:10:31.463Z,1519675831.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:10:31.463Z,1519675831.463 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-02-26T20:10:31.464Z,1519675831.464 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:10:31.464Z,1519675831.464 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-02-26T20:10:31.829Z,1519675831.829 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:10:31.830Z,1519675831.830 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:10:31.830Z,1519675831.830 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:10:31.831Z,1519675831.831 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:10:31.831Z,1519675831.831 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:10:31.831Z,1519675831.831 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:10:37.390Z,1519675837.390 [NAL9602](INFO): NAL9602 initialized
2018-02-26T20:13:32.218Z,1519676012.218 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:13:32.219Z,1519676012.219 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-02-26T20:13:32.219Z,1519676012.219 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:13:32.220Z,1519676012.220 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:13:32.220Z,1519676012.220 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-02-26T20:13:32.221Z,1519676012.221 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:13:32.263Z,1519676012.263 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:13:32.263Z,1519676012.263 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:13:32.681Z,1519676012.681 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:13:32.681Z,1519676012.681 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-02-26T20:13:32.682Z,1519676012.682 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:13:32.682Z,1519676012.682 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-02-26T20:13:33.025Z,1519676013.025 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:13:33.026Z,1519676013.026 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:13:33.026Z,1519676013.026 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:13:33.026Z,1519676013.026 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:13:33.027Z,1519676013.027 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:13:33.027Z,1519676013.027 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:14:01.407Z,1519676041.407 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T20:14:01.408Z,1519676041.408 [Default:CheckIn:C.Wait] Stopped
2018-02-26T20:14:01.408Z,1519676041.408 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T20:14:01.408Z,1519676041.408 [Default:CheckIn:D] Running Loop=1
2018-02-26T20:14:01.819Z,1519676041.819 [Default:CheckIn:D] Stopped
2018-02-26T20:14:01.819Z,1519676041.819 [Default:CheckIn:E] Running Loop=1
2018-02-26T20:14:02.224Z,1519676042.224 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.599349 min 
2018-02-26T20:14:02.224Z,1519676042.224 [Default:CheckIn:E] Stopped
2018-02-26T20:14:02.224Z,1519676042.224 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T20:14:02.225Z,1519676042.225 [Default:CheckIn] Stopped
2018-02-26T20:14:02.225Z,1519676042.225 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T20:14:02.225Z,1519676042.225 [Default:CheckIn](INFO): Running loop #16
2018-02-26T20:14:02.225Z,1519676042.225 [Default:CheckIn] Running Loop=16
2018-02-26T20:14:02.225Z,1519676042.225 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T20:14:02.225Z,1519676042.225 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T20:16:33.325Z,1519676193.325 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:16:33.325Z,1519676193.325 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-02-26T20:16:33.325Z,1519676193.325 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:16:33.327Z,1519676193.327 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:16:33.327Z,1519676193.327 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-02-26T20:16:33.327Z,1519676193.327 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:16:33.360Z,1519676193.360 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:16:33.364Z,1519676193.364 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:16:33.768Z,1519676193.768 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:16:33.768Z,1519676193.768 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-02-26T20:16:33.769Z,1519676193.769 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:16:33.769Z,1519676193.769 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-02-26T20:16:34.142Z,1519676194.142 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:16:34.142Z,1519676194.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:16:34.142Z,1519676194.142 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:16:34.143Z,1519676194.143 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:16:34.143Z,1519676194.143 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:16:34.143Z,1519676194.143 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:16:46.554Z,1519676206.554 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T20:19:02.468Z,1519676342.468 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T20:14:02.2Z
2018-02-26T20:19:02.469Z,1519676342.469 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T20:19:02.469Z,1519676342.469 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T20:19:07.191Z,1519676347.191 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0064.lzma
2018-02-26T20:19:07.989Z,1519676347.989 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0064.lzma.bak
2018-02-26T20:19:07.989Z,1519676347.989 [DataOverHttps](INFO): SBD MOMSN=7869125
2018-02-26T20:19:16.795Z,1519676356.795 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0065.lzma
2018-02-26T20:19:17.593Z,1519676357.593 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0065.lzma.bak
2018-02-26T20:19:17.593Z,1519676357.593 [DataOverHttps](INFO): SBD MOMSN=7869127
2018-02-26T20:19:18.050Z,1519676358.050 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T20:19:18.050Z,1519676358.050 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T20:19:18.050Z,1519676358.050 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T20:19:34.395Z,1519676374.395 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:19:34.395Z,1519676374.395 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-02-26T20:19:34.395Z,1519676374.395 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:19:34.397Z,1519676374.397 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:19:34.397Z,1519676374.397 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-02-26T20:19:34.397Z,1519676374.397 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:19:34.454Z,1519676374.454 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:19:34.454Z,1519676374.454 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:19:34.806Z,1519676374.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:19:34.806Z,1519676374.806 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-02-26T20:19:34.806Z,1519676374.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:19:34.806Z,1519676374.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-02-26T20:19:35.205Z,1519676375.205 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:19:35.206Z,1519676375.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:19:35.206Z,1519676375.206 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:19:35.206Z,1519676375.206 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:19:35.207Z,1519676375.207 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:19:35.207Z,1519676375.207 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:20:39.169Z,1519676439.169 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T20:20:39.169Z,1519676439.169 [NAL9602] Data Fault, FailCount= 5
2018-02-26T20:20:39.169Z,1519676439.169 [NAL9602](ERROR): Data Fault
2018-02-26T20:20:39.234Z,1519676439.234 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T20:20:39.234Z,1519676439.234 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-02-26T20:20:39.570Z,1519676439.570 [NAL9602](INFO): Powering down
2018-02-26T20:20:39.649Z,1519676439.649 [CBIT](INFO): Critical error at 20180226T202039
2018-02-26T20:22:35.597Z,1519676555.597 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:22:35.597Z,1519676555.597 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-02-26T20:22:35.598Z,1519676555.598 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:22:35.599Z,1519676555.599 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:22:35.599Z,1519676555.599 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-02-26T20:22:35.599Z,1519676555.599 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:22:35.624Z,1519676555.624 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:22:35.628Z,1519676555.628 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:22:36.012Z,1519676556.012 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:22:36.012Z,1519676556.012 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-02-26T20:22:36.013Z,1519676556.013 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:22:36.013Z,1519676556.013 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-02-26T20:22:36.388Z,1519676556.388 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:22:36.389Z,1519676556.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:22:36.389Z,1519676556.389 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:22:36.389Z,1519676556.389 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:22:36.390Z,1519676556.390 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:22:36.390Z,1519676556.390 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:22:39.227Z,1519676559.227 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T20:22:39.227Z,1519676559.227 [NAL9602] No Fault, FailCount= 5
2018-02-26T20:22:39.557Z,1519676559.557 [NAL9602](INFO): Powering up NAL9602
2018-02-26T20:22:50.750Z,1519676570.750 [NAL9602](INFO): NAL9602 initialized
2018-02-26T20:24:18.796Z,1519676658.796 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T20:24:18.797Z,1519676658.797 [Default:CheckIn:C.Wait] Stopped
2018-02-26T20:24:18.797Z,1519676658.797 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T20:24:18.797Z,1519676658.797 [Default:CheckIn:D] Running Loop=1
2018-02-26T20:24:19.209Z,1519676659.209 [Default:CheckIn:D] Stopped
2018-02-26T20:24:19.209Z,1519676659.209 [Default:CheckIn:E] Running Loop=1
2018-02-26T20:24:19.609Z,1519676659.609 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 164.889193 min 
2018-02-26T20:24:19.609Z,1519676659.609 [Default:CheckIn:E] Stopped
2018-02-26T20:24:19.609Z,1519676659.609 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T20:24:19.609Z,1519676659.609 [Default:CheckIn] Stopped
2018-02-26T20:24:19.609Z,1519676659.609 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T20:24:19.610Z,1519676659.610 [Default:CheckIn](INFO): Running loop #17
2018-02-26T20:24:19.610Z,1519676659.610 [Default:CheckIn] Running Loop=17
2018-02-26T20:24:19.610Z,1519676659.610 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T20:24:19.610Z,1519676659.610 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T20:25:36.677Z,1519676736.677 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:25:36.678Z,1519676736.678 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-02-26T20:25:36.678Z,1519676736.678 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:25:36.679Z,1519676736.679 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:25:36.679Z,1519676736.679 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-02-26T20:25:36.679Z,1519676736.679 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:25:36.692Z,1519676736.692 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:25:36.692Z,1519676736.692 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:25:37.109Z,1519676737.109 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:25:37.109Z,1519676737.109 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-02-26T20:25:37.109Z,1519676737.109 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:25:37.109Z,1519676737.109 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-02-26T20:25:37.458Z,1519676737.458 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:25:37.459Z,1519676737.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:25:37.459Z,1519676737.459 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:25:37.459Z,1519676737.459 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:25:37.460Z,1519676737.460 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:25:37.461Z,1519676737.461 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:26:46.787Z,1519676806.787 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T20:28:37.583Z,1519676917.583 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:28:37.583Z,1519676917.583 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-02-26T20:28:37.583Z,1519676917.583 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:28:37.585Z,1519676917.585 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:28:37.585Z,1519676917.585 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-02-26T20:28:37.585Z,1519676917.585 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:28:37.597Z,1519676917.597 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:28:37.597Z,1519676917.597 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:28:37.993Z,1519676917.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:28:37.993Z,1519676917.993 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-02-26T20:28:37.994Z,1519676917.994 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:28:37.994Z,1519676917.994 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-02-26T20:28:38.384Z,1519676918.384 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:28:38.384Z,1519676918.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:28:38.385Z,1519676918.385 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:28:38.385Z,1519676918.385 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:28:38.385Z,1519676918.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:28:38.386Z,1519676918.386 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:29:20.006Z,1519676960.006 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T20:24:19.6Z
2018-02-26T20:29:20.007Z,1519676960.007 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T20:29:20.007Z,1519676960.007 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T20:29:23.931Z,1519676963.931 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180226T173634/Courier0068.lzma
2018-02-26T20:29:24.729Z,1519676964.729 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0068.lzma.bak
2018-02-26T20:29:24.729Z,1519676964.729 [DataOverHttps](INFO): SBD MOMSN=7869131
2018-02-26T20:29:34.276Z,1519676974.276 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0069.lzma
2018-02-26T20:29:35.073Z,1519676975.073 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0069.lzma.bak
2018-02-26T20:29:35.073Z,1519676975.073 [DataOverHttps](INFO): SBD MOMSN=7869134
2018-02-26T20:29:35.531Z,1519676975.531 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T20:29:35.531Z,1519676975.531 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T20:29:35.531Z,1519676975.531 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T20:31:39.769Z,1519677099.769 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:31:39.769Z,1519677099.769 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-02-26T20:31:39.769Z,1519677099.769 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:31:39.771Z,1519677099.771 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:31:39.771Z,1519677099.771 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-02-26T20:31:39.771Z,1519677099.771 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:31:39.799Z,1519677099.799 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:31:39.799Z,1519677099.799 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:31:39.957Z,1519677099.957 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:31:39.957Z,1519677099.957 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-02-26T20:31:39.957Z,1519677099.957 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:31:39.957Z,1519677099.957 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-02-26T20:31:40.257Z,1519677100.257 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:31:40.257Z,1519677100.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:31:40.257Z,1519677100.257 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:31:40.258Z,1519677100.258 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:31:40.258Z,1519677100.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:31:40.258Z,1519677100.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:32:52.198Z,1519677172.198 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T20:32:52.198Z,1519677172.198 [NAL9602] Data Fault, FailCount= 1
2018-02-26T20:32:52.198Z,1519677172.198 [NAL9602](ERROR): Data Fault
2018-02-26T20:32:52.269Z,1519677172.269 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T20:32:52.597Z,1519677172.597 [NAL9602](INFO): Powering down
2018-02-26T20:32:53.461Z,1519677173.461 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T20:32:53.461Z,1519677173.461 [NAL9602] No Fault, FailCount= 1
2018-02-26T20:33:22.998Z,1519677202.998 [NAL9602](INFO): Powering up NAL9602
2018-02-26T20:33:34.198Z,1519677214.198 [NAL9602](INFO): NAL9602 initialized
2018-02-26T20:34:36.236Z,1519677276.236 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T20:34:36.236Z,1519677276.236 [Default:CheckIn:C.Wait] Stopped
2018-02-26T20:34:36.236Z,1519677276.236 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T20:34:36.236Z,1519677276.236 [Default:CheckIn:D] Running Loop=1
2018-02-26T20:34:36.647Z,1519677276.647 [Default:CheckIn:D] Stopped
2018-02-26T20:34:36.647Z,1519677276.647 [Default:CheckIn:E] Running Loop=1
2018-02-26T20:34:37.048Z,1519677277.048 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.179801 min 
2018-02-26T20:34:37.048Z,1519677277.048 [Default:CheckIn:E] Stopped
2018-02-26T20:34:37.048Z,1519677277.048 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T20:34:37.048Z,1519677277.048 [Default:CheckIn] Stopped
2018-02-26T20:34:37.049Z,1519677277.049 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T20:34:37.049Z,1519677277.049 [Default:CheckIn](INFO): Running loop #18
2018-02-26T20:34:37.049Z,1519677277.049 [Default:CheckIn] Running Loop=18
2018-02-26T20:34:37.049Z,1519677277.049 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T20:34:37.049Z,1519677277.049 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T20:34:40.945Z,1519677280.945 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:34:40.945Z,1519677280.945 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-02-26T20:34:40.945Z,1519677280.945 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:34:40.946Z,1519677280.946 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:34:40.946Z,1519677280.946 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-02-26T20:34:40.947Z,1519677280.947 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:34:40.958Z,1519677280.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:34:40.958Z,1519677280.958 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:34:41.133Z,1519677281.133 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:34:41.133Z,1519677281.133 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-02-26T20:34:41.134Z,1519677281.134 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:34:41.134Z,1519677281.134 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-02-26T20:34:41.437Z,1519677281.437 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:34:41.437Z,1519677281.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:34:41.438Z,1519677281.438 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:34:41.438Z,1519677281.438 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:34:41.438Z,1519677281.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:34:41.439Z,1519677281.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:36:46.977Z,1519677406.977 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T20:37:42.079Z,1519677462.079 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:37:42.079Z,1519677462.079 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-02-26T20:37:42.079Z,1519677462.079 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:37:42.085Z,1519677462.085 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:37:42.085Z,1519677462.085 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-02-26T20:37:42.085Z,1519677462.085 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:37:42.107Z,1519677462.107 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:37:42.107Z,1519677462.107 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:37:42.216Z,1519677462.216 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:37:42.217Z,1519677462.217 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-02-26T20:37:42.217Z,1519677462.217 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:37:42.217Z,1519677462.217 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-02-26T20:37:42.566Z,1519677462.566 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:37:42.566Z,1519677462.566 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:37:42.566Z,1519677462.566 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:37:42.567Z,1519677462.567 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:37:42.567Z,1519677462.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:37:42.567Z,1519677462.567 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:39:37.357Z,1519677577.357 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T20:34:37.0Z
2018-02-26T20:39:37.357Z,1519677577.357 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T20:39:37.357Z,1519677577.357 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T20:39:41.727Z,1519677581.727 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20180226T173634/Courier0072.lzma
2018-02-26T20:39:42.525Z,1519677582.525 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0072.lzma.bak
2018-02-26T20:39:42.525Z,1519677582.525 [DataOverHttps](INFO): SBD MOMSN=7869138
2018-02-26T20:39:51.340Z,1519677591.340 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0073.lzma
2018-02-26T20:39:52.133Z,1519677592.133 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0073.lzma.bak
2018-02-26T20:39:52.133Z,1519677592.133 [DataOverHttps](INFO): SBD MOMSN=7869140
2018-02-26T20:39:52.589Z,1519677592.589 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T20:39:52.589Z,1519677592.589 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T20:39:52.589Z,1519677592.589 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T20:40:42.947Z,1519677642.947 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:40:42.947Z,1519677642.947 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-02-26T20:40:42.947Z,1519677642.947 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:40:42.949Z,1519677642.949 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:40:42.949Z,1519677642.949 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-02-26T20:40:42.949Z,1519677642.949 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:40:42.961Z,1519677642.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:40:42.961Z,1519677642.961 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:40:43.384Z,1519677643.384 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:40:43.385Z,1519677643.385 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-02-26T20:40:43.385Z,1519677643.385 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:40:43.385Z,1519677643.385 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-02-26T20:40:43.761Z,1519677643.761 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:40:43.762Z,1519677643.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:40:43.762Z,1519677643.762 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:40:43.762Z,1519677643.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:40:43.763Z,1519677643.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:40:43.763Z,1519677643.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:43:35.614Z,1519677815.614 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T20:43:35.614Z,1519677815.614 [NAL9602] Data Fault, FailCount= 2
2018-02-26T20:43:35.614Z,1519677815.614 [NAL9602](ERROR): Data Fault
2018-02-26T20:43:35.691Z,1519677815.691 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T20:43:36.013Z,1519677816.013 [NAL9602](INFO): Powering down
2018-02-26T20:43:36.873Z,1519677816.873 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T20:43:36.873Z,1519677816.873 [NAL9602] No Fault, FailCount= 2
2018-02-26T20:43:44.055Z,1519677824.055 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:43:44.055Z,1519677824.055 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-02-26T20:43:44.055Z,1519677824.055 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:43:44.057Z,1519677824.057 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:43:44.057Z,1519677824.057 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-02-26T20:43:44.057Z,1519677824.057 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:43:44.069Z,1519677824.069 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:43:44.069Z,1519677824.069 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:43:44.475Z,1519677824.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:43:44.475Z,1519677824.475 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-02-26T20:43:44.475Z,1519677824.475 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:43:44.475Z,1519677824.475 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-02-26T20:43:44.856Z,1519677824.856 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:43:44.856Z,1519677824.856 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:43:44.857Z,1519677824.857 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:43:44.857Z,1519677824.857 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:43:44.857Z,1519677824.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:43:44.858Z,1519677824.858 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:44:06.393Z,1519677846.393 [NAL9602](INFO): Powering up NAL9602
2018-02-26T20:44:17.586Z,1519677857.586 [NAL9602](INFO): NAL9602 initialized
2018-02-26T20:44:53.236Z,1519677893.236 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T20:44:53.236Z,1519677893.236 [Default:CheckIn:C.Wait] Stopped
2018-02-26T20:44:53.236Z,1519677893.236 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T20:44:53.236Z,1519677893.236 [Default:CheckIn:D] Running Loop=1
2018-02-26T20:44:53.635Z,1519677893.635 [Default:CheckIn:D] Stopped
2018-02-26T20:44:53.635Z,1519677893.635 [Default:CheckIn:E] Running Loop=1
2018-02-26T20:44:54.032Z,1519677894.032 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.462956 min 
2018-02-26T20:44:54.032Z,1519677894.032 [Default:CheckIn:E] Stopped
2018-02-26T20:44:54.033Z,1519677894.033 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T20:44:54.033Z,1519677894.033 [Default:CheckIn] Stopped
2018-02-26T20:44:54.033Z,1519677894.033 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T20:44:54.033Z,1519677894.033 [Default:CheckIn](INFO): Running loop #19
2018-02-26T20:44:54.033Z,1519677894.033 [Default:CheckIn] Running Loop=19
2018-02-26T20:44:54.033Z,1519677894.033 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T20:44:54.033Z,1519677894.033 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T20:46:45.183Z,1519678005.183 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:46:45.183Z,1519678005.183 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-02-26T20:46:45.183Z,1519678005.183 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:46:45.189Z,1519678005.189 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:46:45.189Z,1519678005.189 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-02-26T20:46:45.189Z,1519678005.189 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:46:45.214Z,1519678005.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:46:45.214Z,1519678005.214 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:46:45.616Z,1519678005.616 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:46:45.616Z,1519678005.616 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-02-26T20:46:45.617Z,1519678005.617 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:46:45.617Z,1519678005.617 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-02-26T20:46:45.990Z,1519678005.990 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:46:45.990Z,1519678005.990 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:46:45.990Z,1519678005.990 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:46:45.991Z,1519678005.991 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:46:45.991Z,1519678005.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:46:45.991Z,1519678005.991 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:46:47.189Z,1519678007.189 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T20:49:46.291Z,1519678186.291 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:49:46.291Z,1519678186.291 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-02-26T20:49:46.291Z,1519678186.291 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:49:46.293Z,1519678186.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:49:46.293Z,1519678186.293 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-02-26T20:49:46.293Z,1519678186.293 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:49:46.305Z,1519678186.305 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:49:46.305Z,1519678186.305 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:49:46.704Z,1519678186.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:49:46.704Z,1519678186.704 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-02-26T20:49:46.705Z,1519678186.705 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:49:46.705Z,1519678186.705 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-02-26T20:49:47.100Z,1519678187.100 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:49:47.100Z,1519678187.100 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:49:47.101Z,1519678187.101 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:49:47.101Z,1519678187.101 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:49:47.101Z,1519678187.101 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:49:47.102Z,1519678187.102 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:49:54.303Z,1519678194.303 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T20:44:54.0Z
2018-02-26T20:49:54.303Z,1519678194.303 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T20:49:54.303Z,1519678194.303 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T20:49:59.027Z,1519678199.027 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0076.lzma
2018-02-26T20:49:59.825Z,1519678199.825 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0076.lzma.bak
2018-02-26T20:49:59.825Z,1519678199.825 [DataOverHttps](INFO): SBD MOMSN=7869144
2018-02-26T20:50:08.617Z,1519678208.617 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0077.lzma
2018-02-26T20:50:09.401Z,1519678209.401 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0077.lzma.bak
2018-02-26T20:50:09.401Z,1519678209.401 [DataOverHttps](INFO): SBD MOMSN=7869146
2018-02-26T20:50:09.863Z,1519678209.863 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T20:50:09.863Z,1519678209.863 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T20:50:09.863Z,1519678209.863 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T20:52:47.438Z,1519678367.438 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:52:47.438Z,1519678367.438 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-02-26T20:52:47.438Z,1519678367.438 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:52:47.440Z,1519678367.440 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:52:47.440Z,1519678367.440 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-02-26T20:52:47.440Z,1519678367.440 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:52:47.473Z,1519678367.473 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:52:47.473Z,1519678367.473 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:52:47.842Z,1519678367.842 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:52:47.842Z,1519678367.842 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-02-26T20:52:47.842Z,1519678367.842 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:52:47.842Z,1519678367.842 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-02-26T20:52:48.231Z,1519678368.231 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:52:48.231Z,1519678368.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:52:48.231Z,1519678368.231 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:52:48.232Z,1519678368.232 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:52:48.232Z,1519678368.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:52:48.232Z,1519678368.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:54:18.518Z,1519678458.518 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T20:54:18.518Z,1519678458.518 [NAL9602] Data Fault, FailCount= 3
2018-02-26T20:54:18.518Z,1519678458.518 [NAL9602](ERROR): Data Fault
2018-02-26T20:54:18.581Z,1519678458.581 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T20:54:18.917Z,1519678458.917 [NAL9602](INFO): Powering down
2018-02-26T20:54:19.778Z,1519678459.778 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T20:54:19.778Z,1519678459.778 [NAL9602] No Fault, FailCount= 3
2018-02-26T20:54:49.318Z,1519678489.318 [NAL9602](INFO): Powering up NAL9602
2018-02-26T20:55:00.118Z,1519678500.118 [NAL9602](INFO): NAL9602 initialized
2018-02-26T20:55:10.553Z,1519678510.553 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T20:55:10.553Z,1519678510.553 [Default:CheckIn:C.Wait] Stopped
2018-02-26T20:55:10.553Z,1519678510.553 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T20:55:10.553Z,1519678510.553 [Default:CheckIn:D] Running Loop=1
2018-02-26T20:55:10.985Z,1519678510.985 [Default:CheckIn:D] Stopped
2018-02-26T20:55:10.985Z,1519678510.985 [Default:CheckIn:E] Running Loop=1
2018-02-26T20:55:11.387Z,1519678511.387 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 195.752116 min 
2018-02-26T20:55:11.387Z,1519678511.387 [Default:CheckIn:E] Stopped
2018-02-26T20:55:11.387Z,1519678511.387 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T20:55:11.387Z,1519678511.387 [Default:CheckIn] Stopped
2018-02-26T20:55:11.387Z,1519678511.387 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T20:55:11.387Z,1519678511.387 [Default:CheckIn](INFO): Running loop #20
2018-02-26T20:55:11.388Z,1519678511.388 [Default:CheckIn] Running Loop=20
2018-02-26T20:55:11.388Z,1519678511.388 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T20:55:11.388Z,1519678511.388 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T20:55:32.518Z,1519678532.518 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.388754 seconds old.
2018-02-26T20:55:32.519Z,1519678532.519 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.389232 seconds old.
2018-02-26T20:55:32.911Z,1519678532.911 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.782338 seconds old.
2018-02-26T20:55:32.917Z,1519678532.917 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.787511 seconds old.
2018-02-26T20:55:33.337Z,1519678533.337 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.208305 seconds old.
2018-02-26T20:55:33.338Z,1519678533.338 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.208696 seconds old.
2018-02-26T20:55:33.736Z,1519678533.736 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.607315 seconds old.
2018-02-26T20:55:33.737Z,1519678533.737 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.607720 seconds old.
2018-02-26T20:55:34.137Z,1519678534.137 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.008310 seconds old.
2018-02-26T20:55:34.138Z,1519678534.138 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.008697 seconds old.
2018-02-26T20:55:34.519Z,1519678534.519 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.390097 seconds old.
2018-02-26T20:55:34.521Z,1519678534.521 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.390851 seconds old.
2018-02-26T20:55:34.926Z,1519678534.926 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.796767 seconds old.
2018-02-26T20:55:34.927Z,1519678534.927 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.797158 seconds old.
2018-02-26T20:55:35.326Z,1519678535.326 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.196565 seconds old.
2018-02-26T20:55:35.327Z,1519678535.327 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.196944 seconds old.
2018-02-26T20:55:35.722Z,1519678535.722 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.593413 seconds old.
2018-02-26T20:55:35.724Z,1519678535.724 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.593798 seconds old.
2018-02-26T20:55:36.131Z,1519678536.131 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.001462 seconds old.
2018-02-26T20:55:36.132Z,1519678536.132 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.001856 seconds old.
2018-02-26T20:55:36.532Z,1519678536.532 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.402816 seconds old.
2018-02-26T20:55:36.533Z,1519678536.533 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.403290 seconds old.
2018-02-26T20:55:36.940Z,1519678536.940 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.811347 seconds old.
2018-02-26T20:55:36.942Z,1519678536.941 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.811775 seconds old.
2018-02-26T20:55:37.316Z,1519678537.316 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.186490 seconds old.
2018-02-26T20:55:37.321Z,1519678537.321 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.191267 seconds old.
2018-02-26T20:55:37.706Z,1519678537.706 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.577008 seconds old.
2018-02-26T20:55:37.707Z,1519678537.707 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.577390 seconds old.
2018-02-26T20:55:38.125Z,1519678538.125 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.996372 seconds old.
2018-02-26T20:55:38.126Z,1519678538.126 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.996768 seconds old.
2018-02-26T20:55:38.513Z,1519678538.513 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.384346 seconds old.
2018-02-26T20:55:38.514Z,1519678538.514 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.384732 seconds old.
2018-02-26T20:55:38.925Z,1519678538.925 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.796271 seconds old.
2018-02-26T20:55:38.926Z,1519678538.926 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.796676 seconds old.
2018-02-26T20:55:39.320Z,1519678539.320 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.190854 seconds old.
2018-02-26T20:55:39.321Z,1519678539.321 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.191499 seconds old.
2018-02-26T20:55:39.731Z,1519678539.731 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.602000 seconds old.
2018-02-26T20:55:39.752Z,1519678539.752 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.622535 seconds old.
2018-02-26T20:55:40.123Z,1519678540.123 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.994336 seconds old.
2018-02-26T20:55:40.125Z,1519678540.125 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.994987 seconds old.
2018-02-26T20:55:40.526Z,1519678540.526 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.396607 seconds old.
2018-02-26T20:55:40.527Z,1519678540.527 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.397010 seconds old.
2018-02-26T20:55:40.919Z,1519678540.919 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.790308 seconds old.
2018-02-26T20:55:40.921Z,1519678540.921 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.790916 seconds old.
2018-02-26T20:55:41.320Z,1519678541.320 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.190579 seconds old.
2018-02-26T20:55:41.321Z,1519678541.321 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.191053 seconds old.
2018-02-26T20:55:41.721Z,1519678541.721 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.592339 seconds old.
2018-02-26T20:55:41.722Z,1519678541.722 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.592741 seconds old.
2018-02-26T20:55:42.137Z,1519678542.137 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.008147 seconds old.
2018-02-26T20:55:42.138Z,1519678542.138 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.008590 seconds old.
2018-02-26T20:55:42.528Z,1519678542.528 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.399163 seconds old.
2018-02-26T20:55:42.529Z,1519678542.529 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.399610 seconds old.
2018-02-26T20:55:42.940Z,1519678542.940 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.806621 seconds old.
2018-02-26T20:55:42.941Z,1519678542.941 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.811281 seconds old.
2018-02-26T20:55:43.323Z,1519678543.323 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.194304 seconds old.
2018-02-26T20:55:43.325Z,1519678543.325 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.195121 seconds old.
2018-02-26T20:55:43.727Z,1519678543.727 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.597612 seconds old.
2018-02-26T20:55:43.728Z,1519678543.728 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.598055 seconds old.
2018-02-26T20:55:44.127Z,1519678544.127 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.997955 seconds old.
2018-02-26T20:55:44.128Z,1519678544.128 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.998568 seconds old.
2018-02-26T20:55:44.525Z,1519678544.525 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.395630 seconds old.
2018-02-26T20:55:44.526Z,1519678544.526 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.396079 seconds old.
2018-02-26T20:55:44.922Z,1519678544.922 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.792501 seconds old.
2018-02-26T20:55:44.923Z,1519678544.923 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.792934 seconds old.
2018-02-26T20:55:48.545Z,1519678548.545 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:55:48.545Z,1519678548.545 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-02-26T20:55:48.546Z,1519678548.546 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:55:48.547Z,1519678548.547 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:55:48.547Z,1519678548.547 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-02-26T20:55:48.547Z,1519678548.547 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:55:48.567Z,1519678548.567 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:55:48.568Z,1519678548.568 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:55:48.946Z,1519678548.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:55:48.946Z,1519678548.946 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-02-26T20:55:48.946Z,1519678548.946 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:55:48.947Z,1519678548.947 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-02-26T20:55:49.326Z,1519678549.326 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:55:49.326Z,1519678549.326 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:55:49.327Z,1519678549.327 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:55:49.327Z,1519678549.327 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:55:49.327Z,1519678549.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:55:49.328Z,1519678549.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:56:47.334Z,1519678607.334 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T20:58:49.651Z,1519678729.651 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:58:49.651Z,1519678729.651 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-02-26T20:58:49.651Z,1519678729.651 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T20:58:49.657Z,1519678729.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T20:58:49.657Z,1519678729.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-02-26T20:58:49.657Z,1519678729.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T20:58:49.681Z,1519678729.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T20:58:49.682Z,1519678729.682 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T20:58:50.079Z,1519678730.079 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T20:58:50.079Z,1519678730.079 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-02-26T20:58:50.079Z,1519678730.079 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T20:58:50.079Z,1519678730.079 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-02-26T20:58:50.454Z,1519678730.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T20:58:50.455Z,1519678730.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:58:50.455Z,1519678730.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T20:58:50.455Z,1519678730.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T20:58:50.456Z,1519678730.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T20:58:50.456Z,1519678730.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:00:11.663Z,1519678811.663 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T20:55:11.4Z
2018-02-26T21:00:11.663Z,1519678811.663 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T21:00:11.663Z,1519678811.663 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T21:00:16.382Z,1519678816.382 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0080.lzma
2018-02-26T21:00:17.181Z,1519678817.181 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0080.lzma.bak
2018-02-26T21:00:17.181Z,1519678817.181 [DataOverHttps](INFO): SBD MOMSN=7869150
2018-02-26T21:00:26.351Z,1519678826.351 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0081.lzma
2018-02-26T21:00:27.149Z,1519678827.149 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0081.lzma.bak
2018-02-26T21:00:27.149Z,1519678827.149 [DataOverHttps](INFO): SBD MOMSN=7869152
2018-02-26T21:00:27.618Z,1519678827.618 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T21:00:27.619Z,1519678827.619 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T21:00:27.619Z,1519678827.619 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T21:01:50.763Z,1519678910.763 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:01:50.763Z,1519678910.763 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-02-26T21:01:50.763Z,1519678910.763 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:01:50.765Z,1519678910.765 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:01:50.765Z,1519678910.765 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-02-26T21:01:50.765Z,1519678910.765 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:01:50.796Z,1519678910.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:01:50.797Z,1519678910.797 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:01:51.200Z,1519678911.200 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:01:51.200Z,1519678911.200 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-02-26T21:01:51.200Z,1519678911.200 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:01:51.201Z,1519678911.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-02-26T21:01:51.553Z,1519678911.553 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:01:51.554Z,1519678911.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:01:51.554Z,1519678911.554 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:01:51.554Z,1519678911.554 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:01:51.555Z,1519678911.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:01:51.555Z,1519678911.555 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:04:51.871Z,1519679091.871 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:04:51.871Z,1519679091.871 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-02-26T21:04:51.872Z,1519679091.872 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:04:51.873Z,1519679091.873 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:04:51.874Z,1519679091.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-02-26T21:04:51.874Z,1519679091.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:04:51.894Z,1519679091.894 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:04:51.894Z,1519679091.894 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:04:52.282Z,1519679092.282 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:04:52.282Z,1519679092.282 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-02-26T21:04:52.283Z,1519679092.283 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:04:52.283Z,1519679092.283 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-02-26T21:04:52.667Z,1519679092.667 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:04:52.668Z,1519679092.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:04:52.668Z,1519679092.668 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:04:52.668Z,1519679092.668 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:04:52.669Z,1519679092.669 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:04:52.669Z,1519679092.669 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:05:03.018Z,1519679103.018 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T21:05:03.018Z,1519679103.018 [NAL9602] Data Fault, FailCount= 4
2018-02-26T21:05:03.018Z,1519679103.018 [NAL9602](ERROR): Data Fault
2018-02-26T21:05:03.111Z,1519679103.111 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T21:05:03.417Z,1519679103.417 [NAL9602](INFO): Powering down
2018-02-26T21:05:04.269Z,1519679104.269 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T21:05:04.269Z,1519679104.269 [NAL9602] No Fault, FailCount= 4
2018-02-26T21:05:28.276Z,1519679128.276 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T21:05:28.276Z,1519679128.276 [Default:CheckIn:C.Wait] Stopped
2018-02-26T21:05:28.276Z,1519679128.276 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T21:05:28.276Z,1519679128.276 [Default:CheckIn:D] Running Loop=1
2018-02-26T21:05:28.659Z,1519679128.659 [Default:CheckIn:D] Stopped
2018-02-26T21:05:28.659Z,1519679128.659 [Default:CheckIn:E] Running Loop=1
2018-02-26T21:05:29.063Z,1519679129.063 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.046680 min 
2018-02-26T21:05:29.063Z,1519679129.063 [Default:CheckIn:E] Stopped
2018-02-26T21:05:29.064Z,1519679129.064 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T21:05:29.064Z,1519679129.064 [Default:CheckIn] Stopped
2018-02-26T21:05:29.064Z,1519679129.064 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T21:05:29.064Z,1519679129.064 [Default:CheckIn](INFO): Running loop #21
2018-02-26T21:05:29.064Z,1519679129.064 [Default:CheckIn] Running Loop=21
2018-02-26T21:05:29.064Z,1519679129.064 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T21:05:29.065Z,1519679129.065 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T21:05:33.790Z,1519679133.790 [NAL9602](INFO): Powering up NAL9602
2018-02-26T21:05:44.982Z,1519679144.982 [NAL9602](INFO): NAL9602 initialized
2018-02-26T21:06:47.393Z,1519679207.393 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T21:07:52.978Z,1519679272.978 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:07:52.978Z,1519679272.978 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-02-26T21:07:52.978Z,1519679272.978 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:07:52.980Z,1519679272.980 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:07:52.980Z,1519679272.980 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-02-26T21:07:52.980Z,1519679272.980 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:07:53.004Z,1519679273.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:07:53.004Z,1519679273.004 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:07:53.005Z,1519679273.005 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:07:53.005Z,1519679273.005 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:10:29.330Z,1519679429.330 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T21:05:29.1Z
2018-02-26T21:10:29.330Z,1519679429.330 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T21:10:29.330Z,1519679429.330 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T21:10:33.679Z,1519679433.679 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0084.lzma
2018-02-26T21:10:34.457Z,1519679434.457 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0084.lzma.bak
2018-02-26T21:10:34.457Z,1519679434.457 [DataOverHttps](INFO): SBD MOMSN=7869156
2018-02-26T21:10:43.264Z,1519679443.264 [DataOverHttps](INFO): Sending 218 bytes from file Logs/20180226T173634/Express0085.lzma
2018-02-26T21:10:44.054Z,1519679444.054 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0085.lzma.bak
2018-02-26T21:10:44.054Z,1519679444.054 [DataOverHttps](INFO): SBD MOMSN=7869158
2018-02-26T21:10:44.509Z,1519679444.509 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T21:10:44.509Z,1519679444.509 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T21:10:44.509Z,1519679444.509 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T21:15:45.188Z,1519679745.188 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T21:15:45.188Z,1519679745.188 [Default:CheckIn:C.Wait] Stopped
2018-02-26T21:15:45.188Z,1519679745.188 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T21:15:45.188Z,1519679745.188 [Default:CheckIn:D] Running Loop=1
2018-02-26T21:15:45.589Z,1519679745.589 [Default:CheckIn:D] Stopped
2018-02-26T21:15:45.589Z,1519679745.589 [Default:CheckIn:E] Running Loop=1
2018-02-26T21:15:45.950Z,1519679745.950 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T21:15:45.950Z,1519679745.950 [NAL9602] Data Fault, FailCount= 5
2018-02-26T21:15:45.950Z,1519679745.950 [NAL9602](ERROR): Data Fault
2018-02-26T21:15:46.007Z,1519679746.007 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 216.328841 min 
2018-02-26T21:15:46.007Z,1519679746.007 [Default:CheckIn:E] Stopped
2018-02-26T21:15:46.007Z,1519679746.007 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T21:15:46.007Z,1519679746.007 [Default:CheckIn] Stopped
2018-02-26T21:15:46.008Z,1519679746.008 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T21:15:46.013Z,1519679746.013 [Default:CheckIn](INFO): Running loop #22
2018-02-26T21:15:46.013Z,1519679746.013 [Default:CheckIn] Running Loop=22
2018-02-26T21:15:46.013Z,1519679746.013 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T21:15:46.013Z,1519679746.013 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T21:15:46.031Z,1519679746.031 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T21:15:46.032Z,1519679746.032 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-02-26T21:15:46.353Z,1519679746.353 [NAL9602](INFO): Powering down
2018-02-26T21:15:46.426Z,1519679746.426 [CBIT](INFO): Critical error at 20180226T211546
2018-02-26T21:16:50.289Z,1519679810.289 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T21:17:46.344Z,1519679866.344 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T21:17:46.344Z,1519679866.344 [NAL9602] No Fault, FailCount= 5
2018-02-26T21:17:46.698Z,1519679866.698 [NAL9602](INFO): Powering up NAL9602
2018-02-26T21:17:57.858Z,1519679877.858 [NAL9602](INFO): NAL9602 initialized
2018-02-26T21:20:46.291Z,1519680046.291 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T21:15:46.0Z
2018-02-26T21:20:46.291Z,1519680046.291 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T21:20:46.292Z,1519680046.292 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T21:20:51.076Z,1519680051.076 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180226T173634/Courier0088.lzma
2018-02-26T21:20:51.874Z,1519680051.874 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0088.lzma.bak
2018-02-26T21:20:51.874Z,1519680051.874 [DataOverHttps](INFO): SBD MOMSN=7869164
2018-02-26T21:21:01.028Z,1519680061.028 [DataOverHttps](INFO): Sending 139 bytes from file Logs/20180226T173634/Express0089.lzma
2018-02-26T21:21:01.825Z,1519680061.825 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0089.lzma.bak
2018-02-26T21:21:01.825Z,1519680061.825 [DataOverHttps](INFO): SBD MOMSN=7869167
2018-02-26T21:21:02.279Z,1519680062.279 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T21:21:02.279Z,1519680062.279 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T21:21:02.279Z,1519680062.279 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T21:22:53.085Z,1519680173.085 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:22:53.085Z,1519680173.085 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-02-26T21:22:53.086Z,1519680173.086 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:22:53.086Z,1519680173.086 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-02-26T21:22:53.455Z,1519680173.455 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:22:53.455Z,1519680173.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:22:53.455Z,1519680173.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:22:53.456Z,1519680173.456 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:22:53.456Z,1519680173.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:22:53.457Z,1519680173.457 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:25:53.783Z,1519680353.783 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:25:53.783Z,1519680353.783 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-02-26T21:25:53.783Z,1519680353.783 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:25:53.785Z,1519680353.785 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:25:53.785Z,1519680353.785 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-02-26T21:25:53.785Z,1519680353.785 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:25:53.796Z,1519680353.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:25:53.797Z,1519680353.797 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:25:54.191Z,1519680354.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:25:54.191Z,1519680354.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-02-26T21:25:54.192Z,1519680354.192 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:25:54.192Z,1519680354.192 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-02-26T21:25:54.581Z,1519680354.581 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:25:54.581Z,1519680354.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:25:54.581Z,1519680354.581 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:25:54.582Z,1519680354.582 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:25:54.582Z,1519680354.582 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:25:54.582Z,1519680354.582 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:26:02.991Z,1519680362.991 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T21:26:02.991Z,1519680362.991 [Default:CheckIn:C.Wait] Stopped
2018-02-26T21:26:02.991Z,1519680362.991 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T21:26:02.991Z,1519680362.991 [Default:CheckIn:D] Running Loop=1
2018-02-26T21:26:03.389Z,1519680363.389 [Default:CheckIn:D] Stopped
2018-02-26T21:26:03.389Z,1519680363.389 [Default:CheckIn:E] Running Loop=1
2018-02-26T21:26:03.790Z,1519680363.790 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 226.625505 min 
2018-02-26T21:26:03.790Z,1519680363.790 [Default:CheckIn:E] Stopped
2018-02-26T21:26:03.790Z,1519680363.790 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T21:26:03.790Z,1519680363.790 [Default:CheckIn] Stopped
2018-02-26T21:26:03.790Z,1519680363.790 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T21:26:03.790Z,1519680363.790 [Default:CheckIn](INFO): Running loop #23
2018-02-26T21:26:03.790Z,1519680363.790 [Default:CheckIn] Running Loop=23
2018-02-26T21:26:03.790Z,1519680363.790 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T21:26:03.791Z,1519680363.791 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T21:26:50.590Z,1519680410.590 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T21:27:59.278Z,1519680479.278 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T21:27:59.278Z,1519680479.278 [NAL9602] Data Fault, FailCount= 1
2018-02-26T21:27:59.278Z,1519680479.278 [NAL9602](ERROR): Data Fault
2018-02-26T21:27:59.356Z,1519680479.356 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T21:27:59.678Z,1519680479.678 [NAL9602](INFO): Powering down
2018-02-26T21:28:00.558Z,1519680480.558 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T21:28:00.558Z,1519680480.558 [NAL9602] No Fault, FailCount= 1
2018-02-26T21:28:30.034Z,1519680510.034 [NAL9602](INFO): Powering up NAL9602
2018-02-26T21:28:41.234Z,1519680521.234 [NAL9602](INFO): NAL9602 initialized
2018-02-26T21:28:54.886Z,1519680534.886 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:28:54.886Z,1519680534.886 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-02-26T21:28:54.886Z,1519680534.886 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:28:54.888Z,1519680534.888 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:28:54.888Z,1519680534.888 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-02-26T21:28:54.888Z,1519680534.888 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:28:54.900Z,1519680534.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:28:54.901Z,1519680534.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:28:55.297Z,1519680535.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:28:55.297Z,1519680535.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-02-26T21:28:55.297Z,1519680535.297 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:28:55.297Z,1519680535.297 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-02-26T21:28:55.685Z,1519680535.685 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:28:55.685Z,1519680535.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:28:55.685Z,1519680535.685 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:28:55.686Z,1519680535.686 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:28:55.686Z,1519680535.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:28:55.686Z,1519680535.686 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:31:04.075Z,1519680664.075 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T21:26:03.8Z
2018-02-26T21:31:04.075Z,1519680664.075 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T21:31:04.075Z,1519680664.075 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T21:31:08.791Z,1519680668.791 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0092.lzma
2018-02-26T21:31:09.589Z,1519680669.589 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0092.lzma.bak
2018-02-26T21:31:09.589Z,1519680669.589 [DataOverHttps](INFO): SBD MOMSN=7869171
2018-02-26T21:31:18.536Z,1519680678.536 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0093.lzma
2018-02-26T21:31:19.317Z,1519680679.317 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0093.lzma.bak
2018-02-26T21:31:19.317Z,1519680679.317 [DataOverHttps](INFO): SBD MOMSN=7869173
2018-02-26T21:31:19.785Z,1519680679.785 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T21:31:19.785Z,1519680679.785 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T21:31:19.785Z,1519680679.785 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T21:31:55.780Z,1519680715.780 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:31:55.780Z,1519680715.780 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-02-26T21:31:55.780Z,1519680715.780 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:31:55.782Z,1519680715.782 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:31:55.782Z,1519680715.782 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-02-26T21:31:55.782Z,1519680715.782 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:31:55.793Z,1519680715.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:31:55.794Z,1519680715.794 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:31:56.191Z,1519680716.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:31:56.191Z,1519680716.191 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-02-26T21:31:56.192Z,1519680716.192 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:31:56.192Z,1519680716.192 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-02-26T21:31:56.577Z,1519680716.577 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:31:56.577Z,1519680716.577 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:31:56.578Z,1519680716.578 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:31:56.578Z,1519680716.578 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:31:56.578Z,1519680716.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:31:56.579Z,1519680716.579 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:34:56.970Z,1519680896.970 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:34:56.970Z,1519680896.970 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-02-26T21:34:56.970Z,1519680896.970 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:34:56.972Z,1519680896.972 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:34:56.972Z,1519680896.972 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-02-26T21:34:56.972Z,1519680896.972 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:34:56.984Z,1519680896.984 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:34:56.984Z,1519680896.984 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:34:57.388Z,1519680897.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:34:57.388Z,1519680897.388 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-02-26T21:34:57.389Z,1519680897.389 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:34:57.389Z,1519680897.389 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-02-26T21:34:57.773Z,1519680897.773 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:34:57.773Z,1519680897.773 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:34:57.774Z,1519680897.774 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:34:57.774Z,1519680897.774 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:34:57.774Z,1519680897.774 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:34:57.775Z,1519680897.775 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:36:20.529Z,1519680980.529 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T21:36:20.530Z,1519680980.530 [Default:CheckIn:C.Wait] Stopped
2018-02-26T21:36:20.530Z,1519680980.530 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T21:36:20.530Z,1519680980.530 [Default:CheckIn:D] Running Loop=1
2018-02-26T21:36:20.940Z,1519680980.940 [Default:CheckIn:D] Stopped
2018-02-26T21:36:20.940Z,1519680980.940 [Default:CheckIn:E] Running Loop=1
2018-02-26T21:36:21.382Z,1519680981.382 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 236.918018 min 
2018-02-26T21:36:21.382Z,1519680981.382 [Default:CheckIn:E] Stopped
2018-02-26T21:36:21.382Z,1519680981.382 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T21:36:21.382Z,1519680981.382 [Default:CheckIn] Stopped
2018-02-26T21:36:21.383Z,1519680981.383 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T21:36:21.383Z,1519680981.383 [Default:CheckIn](INFO): Running loop #24
2018-02-26T21:36:21.383Z,1519680981.383 [Default:CheckIn] Running Loop=24
2018-02-26T21:36:21.383Z,1519680981.383 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T21:36:21.383Z,1519680981.383 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T21:36:50.838Z,1519681010.838 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T21:37:58.003Z,1519681078.003 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:37:58.003Z,1519681078.003 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-02-26T21:37:58.003Z,1519681078.003 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:37:58.005Z,1519681078.005 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:37:58.005Z,1519681078.005 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-02-26T21:37:58.005Z,1519681078.005 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:37:58.016Z,1519681078.016 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:37:58.017Z,1519681078.017 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:37:58.421Z,1519681078.421 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:37:58.421Z,1519681078.421 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-02-26T21:37:58.422Z,1519681078.422 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:37:58.422Z,1519681078.422 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-02-26T21:37:58.810Z,1519681078.810 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:37:58.810Z,1519681078.810 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:37:58.810Z,1519681078.810 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:37:58.811Z,1519681078.811 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:37:58.811Z,1519681078.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:37:58.811Z,1519681078.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:38:43.346Z,1519681123.346 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T21:38:43.346Z,1519681123.346 [NAL9602] Data Fault, FailCount= 2
2018-02-26T21:38:43.346Z,1519681123.346 [NAL9602](ERROR): Data Fault
2018-02-26T21:38:43.414Z,1519681123.414 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T21:38:43.737Z,1519681123.737 [NAL9602](INFO): Powering down
2018-02-26T21:38:44.587Z,1519681124.587 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T21:38:44.588Z,1519681124.588 [NAL9602] No Fault, FailCount= 2
2018-02-26T21:39:14.138Z,1519681154.138 [NAL9602](INFO): Powering up NAL9602
2018-02-26T21:39:25.717Z,1519681165.717 [NAL9602](INFO): NAL9602 initialized
2018-02-26T21:40:59.072Z,1519681259.072 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:40:59.072Z,1519681259.072 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-02-26T21:40:59.072Z,1519681259.072 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:40:59.074Z,1519681259.074 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:40:59.074Z,1519681259.074 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-02-26T21:40:59.074Z,1519681259.074 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:40:59.086Z,1519681259.086 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:40:59.086Z,1519681259.086 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:40:59.488Z,1519681259.488 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:40:59.488Z,1519681259.488 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-02-26T21:40:59.488Z,1519681259.488 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:40:59.488Z,1519681259.488 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-02-26T21:40:59.873Z,1519681259.873 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:40:59.874Z,1519681259.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:40:59.874Z,1519681259.874 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:40:59.874Z,1519681259.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:40:59.875Z,1519681259.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:40:59.875Z,1519681259.875 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:41:21.476Z,1519681281.476 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T21:36:21.4Z
2018-02-26T21:41:21.476Z,1519681281.476 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T21:41:21.476Z,1519681281.476 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T21:41:26.223Z,1519681286.223 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0096.lzma
2018-02-26T21:41:27.021Z,1519681287.021 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0096.lzma.bak
2018-02-26T21:41:27.021Z,1519681287.021 [DataOverHttps](INFO): SBD MOMSN=7869177
2018-02-26T21:41:36.575Z,1519681296.575 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0097.lzma
2018-02-26T21:41:37.373Z,1519681297.373 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0097.lzma.bak
2018-02-26T21:41:37.373Z,1519681297.373 [DataOverHttps](INFO): SBD MOMSN=7869179
2018-02-26T21:41:37.831Z,1519681297.831 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T21:41:37.831Z,1519681297.831 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T21:41:37.831Z,1519681297.831 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T21:44:00.223Z,1519681440.223 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:44:00.223Z,1519681440.223 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-02-26T21:44:00.223Z,1519681440.223 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:44:00.229Z,1519681440.229 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:44:00.229Z,1519681440.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-02-26T21:44:00.229Z,1519681440.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:44:00.265Z,1519681440.265 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:44:00.265Z,1519681440.265 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:44:00.622Z,1519681440.622 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:44:00.622Z,1519681440.622 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-02-26T21:44:00.622Z,1519681440.622 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:44:00.622Z,1519681440.622 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-02-26T21:44:01.008Z,1519681441.008 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:44:01.008Z,1519681441.008 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:44:01.009Z,1519681441.009 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:44:01.009Z,1519681441.009 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:44:01.009Z,1519681441.009 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:44:01.010Z,1519681441.010 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:46:38.524Z,1519681598.524 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T21:46:38.524Z,1519681598.524 [Default:CheckIn:C.Wait] Stopped
2018-02-26T21:46:38.524Z,1519681598.524 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T21:46:38.524Z,1519681598.524 [Default:CheckIn:D] Running Loop=1
2018-02-26T21:46:38.945Z,1519681598.945 [Default:CheckIn:D] Stopped
2018-02-26T21:46:38.945Z,1519681598.945 [Default:CheckIn:E] Running Loop=1
2018-02-26T21:46:39.327Z,1519681599.327 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 247.218099 min 
2018-02-26T21:46:39.327Z,1519681599.327 [Default:CheckIn:E] Stopped
2018-02-26T21:46:39.327Z,1519681599.327 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T21:46:39.327Z,1519681599.327 [Default:CheckIn] Stopped
2018-02-26T21:46:39.328Z,1519681599.328 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T21:46:39.328Z,1519681599.328 [Default:CheckIn](INFO): Running loop #25
2018-02-26T21:46:39.328Z,1519681599.328 [Default:CheckIn] Running Loop=25
2018-02-26T21:46:39.328Z,1519681599.328 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T21:46:39.328Z,1519681599.328 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T21:46:50.907Z,1519681610.907 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T21:47:01.293Z,1519681621.293 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:47:01.293Z,1519681621.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-02-26T21:47:01.293Z,1519681621.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:47:01.295Z,1519681621.295 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:47:01.295Z,1519681621.295 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-02-26T21:47:01.295Z,1519681621.295 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:47:01.331Z,1519681621.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:47:01.331Z,1519681621.331 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:47:01.716Z,1519681621.716 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:47:01.716Z,1519681621.716 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-02-26T21:47:01.717Z,1519681621.717 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:47:01.717Z,1519681621.717 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-02-26T21:47:02.096Z,1519681622.096 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:47:02.097Z,1519681622.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:47:02.097Z,1519681622.097 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:47:02.097Z,1519681622.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:47:02.098Z,1519681622.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:47:02.098Z,1519681622.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:48:55.678Z,1519681735.678 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.394683 seconds old.
2018-02-26T21:48:55.679Z,1519681735.679 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.395168 seconds old.
2018-02-26T21:48:56.087Z,1519681736.087 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.803603 seconds old.
2018-02-26T21:48:56.093Z,1519681736.093 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.804070 seconds old.
2018-02-26T21:48:56.482Z,1519681736.482 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.198538 seconds old.
2018-02-26T21:48:56.483Z,1519681736.483 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.198950 seconds old.
2018-02-26T21:48:56.886Z,1519681736.886 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.602350 seconds old.
2018-02-26T21:48:56.887Z,1519681736.887 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.602749 seconds old.
2018-02-26T21:49:27.234Z,1519681767.234 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T21:49:27.234Z,1519681767.234 [NAL9602] Data Fault, FailCount= 3
2018-02-26T21:49:27.234Z,1519681767.234 [NAL9602](ERROR): Data Fault
2018-02-26T21:49:27.321Z,1519681767.321 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T21:49:27.633Z,1519681767.633 [NAL9602](INFO): Powering down
2018-02-26T21:49:28.493Z,1519681768.493 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T21:49:28.493Z,1519681768.493 [NAL9602] No Fault, FailCount= 3
2018-02-26T21:49:57.994Z,1519681797.994 [NAL9602](INFO): Powering up NAL9602
2018-02-26T21:50:02.430Z,1519681802.430 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:50:02.430Z,1519681802.430 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-02-26T21:50:02.430Z,1519681802.430 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:50:02.433Z,1519681802.433 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:50:02.433Z,1519681802.433 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-02-26T21:50:02.433Z,1519681802.433 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:50:02.495Z,1519681802.495 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:50:02.495Z,1519681802.495 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:50:02.865Z,1519681802.865 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:50:02.866Z,1519681802.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-02-26T21:50:02.866Z,1519681802.866 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:50:02.866Z,1519681802.866 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-02-26T21:50:03.237Z,1519681803.237 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:50:03.237Z,1519681803.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:50:03.237Z,1519681803.237 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:50:03.238Z,1519681803.238 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:50:03.238Z,1519681803.238 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:50:03.238Z,1519681803.238 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:50:09.194Z,1519681809.194 [NAL9602](INFO): NAL9602 initialized
2018-02-26T21:51:39.677Z,1519681899.677 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T21:46:39.3Z
2018-02-26T21:51:39.677Z,1519681899.677 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T21:51:39.677Z,1519681899.677 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T21:51:43.995Z,1519681903.995 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0100.lzma
2018-02-26T21:51:44.797Z,1519681904.797 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0100.lzma.bak
2018-02-26T21:51:44.797Z,1519681904.797 [DataOverHttps](INFO): SBD MOMSN=7869183
2018-02-26T21:51:53.947Z,1519681913.947 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0101.lzma
2018-02-26T21:51:54.745Z,1519681914.745 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0101.lzma.bak
2018-02-26T21:51:54.745Z,1519681914.745 [DataOverHttps](INFO): SBD MOMSN=7869185
2018-02-26T21:51:55.226Z,1519681915.226 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T21:51:55.226Z,1519681915.226 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T21:51:55.226Z,1519681915.226 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T21:53:03.562Z,1519681983.562 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:53:03.562Z,1519681983.562 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-02-26T21:53:03.562Z,1519681983.562 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:53:03.564Z,1519681983.564 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:53:03.564Z,1519681983.564 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-02-26T21:53:03.564Z,1519681983.564 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:53:03.576Z,1519681983.576 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:53:03.576Z,1519681983.576 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:53:03.967Z,1519681983.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:53:03.967Z,1519681983.967 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-02-26T21:53:03.968Z,1519681983.968 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:53:03.968Z,1519681983.968 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-02-26T21:53:04.366Z,1519681984.366 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:53:04.366Z,1519681984.366 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:53:04.366Z,1519681984.366 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:53:04.367Z,1519681984.367 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:53:04.367Z,1519681984.367 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:53:04.368Z,1519681984.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:56:04.670Z,1519682164.670 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:56:04.670Z,1519682164.670 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-02-26T21:56:04.670Z,1519682164.670 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:56:04.671Z,1519682164.671 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:56:04.672Z,1519682164.672 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-02-26T21:56:04.672Z,1519682164.672 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:56:04.706Z,1519682164.706 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:56:04.707Z,1519682164.707 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:56:05.081Z,1519682165.081 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:56:05.081Z,1519682165.081 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-02-26T21:56:05.082Z,1519682165.082 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:56:05.082Z,1519682165.082 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-02-26T21:56:05.462Z,1519682165.462 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:56:05.462Z,1519682165.462 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:56:05.463Z,1519682165.463 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:56:05.463Z,1519682165.463 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:56:05.463Z,1519682165.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:56:05.464Z,1519682165.464 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:56:51.080Z,1519682211.080 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T21:56:55.865Z,1519682215.865 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T21:56:55.865Z,1519682215.865 [Default:CheckIn:C.Wait] Stopped
2018-02-26T21:56:55.865Z,1519682215.865 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T21:56:55.865Z,1519682215.865 [Default:CheckIn:D] Running Loop=1
2018-02-26T21:56:56.278Z,1519682216.278 [Default:CheckIn:D] Stopped
2018-02-26T21:56:56.278Z,1519682216.278 [Default:CheckIn:E] Running Loop=1
2018-02-26T21:56:56.665Z,1519682216.665 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 257.506999 min 
2018-02-26T21:56:56.665Z,1519682216.665 [Default:CheckIn:E] Stopped
2018-02-26T21:56:56.665Z,1519682216.665 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T21:56:56.665Z,1519682216.665 [Default:CheckIn] Stopped
2018-02-26T21:56:56.665Z,1519682216.665 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T21:56:56.666Z,1519682216.666 [Default:CheckIn](INFO): Running loop #26
2018-02-26T21:56:56.666Z,1519682216.666 [Default:CheckIn] Running Loop=26
2018-02-26T21:56:56.666Z,1519682216.666 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T21:56:56.666Z,1519682216.666 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T21:59:05.817Z,1519682345.817 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:59:05.817Z,1519682345.817 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-02-26T21:59:05.817Z,1519682345.817 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T21:59:05.819Z,1519682345.819 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T21:59:05.819Z,1519682345.819 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-02-26T21:59:05.819Z,1519682345.819 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T21:59:05.831Z,1519682345.831 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T21:59:05.831Z,1519682345.831 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T21:59:06.217Z,1519682346.217 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T21:59:06.217Z,1519682346.217 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-02-26T21:59:06.217Z,1519682346.217 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T21:59:06.217Z,1519682346.217 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-02-26T21:59:06.611Z,1519682346.611 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T21:59:06.611Z,1519682346.611 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:59:06.612Z,1519682346.612 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T21:59:06.612Z,1519682346.612 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T21:59:06.613Z,1519682346.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T21:59:06.613Z,1519682346.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:00:10.126Z,1519682410.126 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T22:00:10.126Z,1519682410.126 [NAL9602] Data Fault, FailCount= 4
2018-02-26T22:00:10.126Z,1519682410.126 [NAL9602](ERROR): Data Fault
2018-02-26T22:00:10.206Z,1519682410.206 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T22:00:10.525Z,1519682410.525 [NAL9602](INFO): Powering down
2018-02-26T22:00:11.377Z,1519682411.377 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T22:00:11.377Z,1519682411.377 [NAL9602] No Fault, FailCount= 4
2018-02-26T22:00:40.926Z,1519682440.926 [NAL9602](INFO): Powering up NAL9602
2018-02-26T22:00:52.130Z,1519682452.130 [NAL9602](INFO): NAL9602 initialized
2018-02-26T22:01:56.975Z,1519682516.975 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T21:56:56.7Z
2018-02-26T22:01:56.975Z,1519682516.975 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T22:01:56.975Z,1519682516.975 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T22:02:01.317Z,1519682521.317 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0104.lzma
2018-02-26T22:02:02.101Z,1519682522.101 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0104.lzma.bak
2018-02-26T22:02:02.101Z,1519682522.101 [DataOverHttps](INFO): SBD MOMSN=7869189
2018-02-26T22:02:06.950Z,1519682526.950 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:02:06.950Z,1519682526.950 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-02-26T22:02:06.950Z,1519682526.950 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:02:06.952Z,1519682526.952 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:02:06.952Z,1519682526.952 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-02-26T22:02:06.952Z,1519682526.952 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:02:06.964Z,1519682526.964 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:02:06.964Z,1519682526.964 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:02:07.367Z,1519682527.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:02:07.367Z,1519682527.367 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-02-26T22:02:07.367Z,1519682527.367 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:02:07.367Z,1519682527.367 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-02-26T22:02:07.749Z,1519682527.749 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:02:07.750Z,1519682527.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:02:07.750Z,1519682527.750 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:02:07.750Z,1519682527.750 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:02:07.751Z,1519682527.751 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:02:07.751Z,1519682527.751 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:02:10.874Z,1519682530.874 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0105.lzma
2018-02-26T22:02:11.673Z,1519682531.673 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0105.lzma.bak
2018-02-26T22:02:11.673Z,1519682531.673 [DataOverHttps](INFO): SBD MOMSN=7869191
2018-02-26T22:02:12.165Z,1519682532.165 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T22:02:12.165Z,1519682532.165 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T22:02:12.165Z,1519682532.165 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T22:05:08.038Z,1519682708.038 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:05:08.038Z,1519682708.038 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-02-26T22:05:08.038Z,1519682708.038 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:05:08.039Z,1519682708.039 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:05:08.039Z,1519682708.039 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-02-26T22:05:08.040Z,1519682708.040 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:05:08.051Z,1519682708.051 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:05:08.052Z,1519682708.052 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:05:08.459Z,1519682708.459 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:05:08.460Z,1519682708.460 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-02-26T22:05:08.476Z,1519682708.476 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:05:08.476Z,1519682708.476 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-02-26T22:05:08.839Z,1519682708.839 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:05:08.840Z,1519682708.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:05:08.840Z,1519682708.840 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:05:08.841Z,1519682708.841 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:05:08.842Z,1519682708.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:05:08.842Z,1519682708.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:06:51.202Z,1519682811.202 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T22:07:12.801Z,1519682832.801 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T22:07:12.801Z,1519682832.801 [Default:CheckIn:C.Wait] Stopped
2018-02-26T22:07:12.801Z,1519682832.801 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T22:07:12.801Z,1519682832.801 [Default:CheckIn:D] Running Loop=1
2018-02-26T22:07:13.213Z,1519682833.213 [Default:CheckIn:D] Stopped
2018-02-26T22:07:13.213Z,1519682833.213 [Default:CheckIn:E] Running Loop=1
2018-02-26T22:07:13.607Z,1519682833.607 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 267.789242 min 
2018-02-26T22:07:13.608Z,1519682833.608 [Default:CheckIn:E] Stopped
2018-02-26T22:07:13.609Z,1519682833.609 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T22:07:13.609Z,1519682833.609 [Default:CheckIn] Stopped
2018-02-26T22:07:13.609Z,1519682833.609 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T22:07:13.609Z,1519682833.609 [Default:CheckIn](INFO): Running loop #27
2018-02-26T22:07:13.609Z,1519682833.609 [Default:CheckIn] Running Loop=27
2018-02-26T22:07:13.609Z,1519682833.609 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T22:07:13.609Z,1519682833.609 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T22:08:09.168Z,1519682889.168 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:08:09.169Z,1519682889.169 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-02-26T22:08:09.169Z,1519682889.169 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:08:09.170Z,1519682889.170 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:08:09.170Z,1519682889.170 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-02-26T22:08:09.170Z,1519682889.170 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:08:09.183Z,1519682889.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:08:09.183Z,1519682889.183 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:08:09.581Z,1519682889.581 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:08:09.581Z,1519682889.581 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-02-26T22:08:09.581Z,1519682889.581 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:08:09.581Z,1519682889.581 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-02-26T22:08:09.966Z,1519682889.966 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:08:09.966Z,1519682889.966 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:08:09.967Z,1519682889.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:08:09.967Z,1519682889.967 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:08:09.967Z,1519682889.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:08:09.972Z,1519682889.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:10:53.874Z,1519683053.874 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T22:10:53.874Z,1519683053.874 [NAL9602] Data Fault, FailCount= 5
2018-02-26T22:10:53.874Z,1519683053.874 [NAL9602](ERROR): Data Fault
2018-02-26T22:10:53.976Z,1519683053.976 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T22:10:53.977Z,1519683053.977 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-02-26T22:10:54.278Z,1519683054.278 [NAL9602](INFO): Powering down
2018-02-26T22:10:54.346Z,1519683054.346 [CBIT](INFO): Critical error at 20180226T221053
2018-02-26T22:11:10.311Z,1519683070.311 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:11:10.311Z,1519683070.311 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-02-26T22:11:10.311Z,1519683070.311 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:11:10.312Z,1519683070.312 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:11:10.313Z,1519683070.313 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-02-26T22:11:10.313Z,1519683070.313 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:11:10.324Z,1519683070.324 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:11:10.324Z,1519683070.324 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:11:10.728Z,1519683070.728 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:11:10.728Z,1519683070.728 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-02-26T22:11:10.729Z,1519683070.729 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:11:10.729Z,1519683070.729 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-02-26T22:11:11.111Z,1519683071.111 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:11:11.111Z,1519683071.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:11:11.111Z,1519683071.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:11:11.112Z,1519683071.112 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:11:11.112Z,1519683071.112 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:11:11.113Z,1519683071.113 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:12:13.688Z,1519683133.688 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T22:07:13.6Z
2018-02-26T22:12:13.688Z,1519683133.688 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T22:12:13.688Z,1519683133.688 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T22:12:18.091Z,1519683138.091 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180226T173634/Courier0108.lzma
2018-02-26T22:12:18.893Z,1519683138.893 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0108.lzma.bak
2018-02-26T22:12:18.893Z,1519683138.893 [DataOverHttps](INFO): SBD MOMSN=7869195
2018-02-26T22:12:27.651Z,1519683147.651 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0109.lzma
2018-02-26T22:12:28.417Z,1519683148.417 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0109.lzma.bak
2018-02-26T22:12:28.417Z,1519683148.417 [DataOverHttps](INFO): SBD MOMSN=7869198
2018-02-26T22:12:28.896Z,1519683148.896 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T22:12:28.896Z,1519683148.896 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T22:12:28.896Z,1519683148.896 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T22:12:54.093Z,1519683174.093 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T22:12:54.093Z,1519683174.093 [NAL9602] No Fault, FailCount= 5
2018-02-26T22:12:54.426Z,1519683174.426 [NAL9602](INFO): Powering up NAL9602
2018-02-26T22:13:05.226Z,1519683185.226 [NAL9602](INFO): NAL9602 initialized
2018-02-26T22:14:11.260Z,1519683251.260 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:14:11.260Z,1519683251.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-02-26T22:14:11.260Z,1519683251.260 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:14:11.262Z,1519683251.262 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:14:11.262Z,1519683251.262 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-02-26T22:14:11.262Z,1519683251.262 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:14:11.286Z,1519683251.286 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:14:11.286Z,1519683251.286 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:14:11.673Z,1519683251.673 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:14:11.673Z,1519683251.673 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-02-26T22:14:11.673Z,1519683251.673 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:14:11.673Z,1519683251.673 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-02-26T22:14:12.089Z,1519683252.089 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:14:12.090Z,1519683252.090 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:14:12.090Z,1519683252.090 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:14:12.091Z,1519683252.091 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:14:12.091Z,1519683252.091 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:14:12.091Z,1519683252.091 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:16:51.564Z,1519683411.564 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T22:17:12.348Z,1519683432.348 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:17:12.348Z,1519683432.348 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-02-26T22:17:12.349Z,1519683432.349 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:17:12.350Z,1519683432.350 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:17:12.350Z,1519683432.350 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-02-26T22:17:12.350Z,1519683432.350 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:17:12.378Z,1519683432.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:17:12.379Z,1519683432.379 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:17:12.795Z,1519683432.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:17:12.796Z,1519683432.796 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-02-26T22:17:12.796Z,1519683432.796 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:17:12.796Z,1519683432.796 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-02-26T22:17:13.149Z,1519683433.149 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:17:13.150Z,1519683433.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:17:13.150Z,1519683433.150 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:17:13.150Z,1519683433.150 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:17:13.151Z,1519683433.151 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:17:13.151Z,1519683433.151 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:17:29.563Z,1519683449.563 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T22:17:29.563Z,1519683449.563 [Default:CheckIn:C.Wait] Stopped
2018-02-26T22:17:29.563Z,1519683449.563 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T22:17:29.563Z,1519683449.563 [Default:CheckIn:D] Running Loop=1
2018-02-26T22:17:29.968Z,1519683449.968 [Default:CheckIn:D] Stopped
2018-02-26T22:17:29.968Z,1519683449.968 [Default:CheckIn:E] Running Loop=1
2018-02-26T22:17:30.366Z,1519683450.366 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 278.068490 min 
2018-02-26T22:17:30.367Z,1519683450.367 [Default:CheckIn:E] Stopped
2018-02-26T22:17:30.367Z,1519683450.367 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T22:17:30.367Z,1519683450.367 [Default:CheckIn] Stopped
2018-02-26T22:17:30.367Z,1519683450.367 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T22:17:30.367Z,1519683450.367 [Default:CheckIn](INFO): Running loop #28
2018-02-26T22:17:30.367Z,1519683450.367 [Default:CheckIn] Running Loop=28
2018-02-26T22:17:30.367Z,1519683450.367 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T22:17:30.368Z,1519683450.368 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T22:20:13.156Z,1519683613.156 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:20:13.156Z,1519683613.156 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-02-26T22:20:13.156Z,1519683613.156 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:20:13.158Z,1519683613.158 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:20:13.158Z,1519683613.158 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-02-26T22:20:13.158Z,1519683613.158 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:20:13.170Z,1519683613.170 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:20:13.170Z,1519683613.170 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:20:13.571Z,1519683613.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:20:13.571Z,1519683613.571 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-02-26T22:20:13.571Z,1519683613.571 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:20:13.571Z,1519683613.571 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-02-26T22:20:13.966Z,1519683613.966 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:20:13.967Z,1519683613.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:20:13.967Z,1519683613.967 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:20:13.967Z,1519683613.967 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:20:13.968Z,1519683613.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:20:13.968Z,1519683613.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:22:30.508Z,1519683750.508 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T22:17:30.4Z
2018-02-26T22:22:30.508Z,1519683750.508 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T22:22:30.508Z,1519683750.508 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T22:22:34.891Z,1519683754.891 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0112.lzma
2018-02-26T22:22:35.694Z,1519683755.694 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0112.lzma.bak
2018-02-26T22:22:35.694Z,1519683755.694 [DataOverHttps](INFO): SBD MOMSN=7869202
2018-02-26T22:22:44.576Z,1519683764.576 [DataOverHttps](INFO): Sending 98 bytes from file Logs/20180226T173634/Express0113.lzma
2018-02-26T22:22:45.365Z,1519683765.365 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0113.lzma.bak
2018-02-26T22:22:45.365Z,1519683765.365 [DataOverHttps](INFO): SBD MOMSN=7869204
2018-02-26T22:22:45.823Z,1519683765.823 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T22:22:45.823Z,1519683765.823 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T22:22:45.823Z,1519683765.823 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T22:23:07.386Z,1519683787.386 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T22:23:07.386Z,1519683787.386 [NAL9602] Data Fault, FailCount= 1
2018-02-26T22:23:07.386Z,1519683787.386 [NAL9602](ERROR): Data Fault
2018-02-26T22:23:07.460Z,1519683787.460 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T22:23:07.785Z,1519683787.785 [NAL9602](INFO): Powering down
2018-02-26T22:23:08.655Z,1519683788.655 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T22:23:08.655Z,1519683788.655 [NAL9602] No Fault, FailCount= 1
2018-02-26T22:23:14.220Z,1519683794.220 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:23:14.220Z,1519683794.220 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-02-26T22:23:14.221Z,1519683794.221 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:23:14.222Z,1519683794.222 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:23:14.222Z,1519683794.222 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-02-26T22:23:14.222Z,1519683794.222 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:23:14.234Z,1519683794.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:23:14.234Z,1519683794.234 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:23:14.234Z,1519683794.234 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:23:14.235Z,1519683794.235 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:23:37.794Z,1519683817.794 [NAL9602](INFO): Powering up NAL9602
2018-02-26T22:23:49.838Z,1519683829.838 [NAL9602](INFO): NAL9602 initialized
2018-02-26T22:26:51.629Z,1519684011.629 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T22:27:46.397Z,1519684066.397 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T22:27:46.397Z,1519684066.397 [Default:CheckIn:C.Wait] Stopped
2018-02-26T22:27:46.397Z,1519684066.397 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T22:27:46.397Z,1519684066.397 [Default:CheckIn:D] Running Loop=1
2018-02-26T22:27:49.496Z,1519684069.496 [Default:CheckIn:D] Stopped
2018-02-26T22:27:49.496Z,1519684069.496 [Default:CheckIn:E] Running Loop=1
2018-02-26T22:27:49.651Z,1519684069.651 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 288.393978 min 
2018-02-26T22:27:49.652Z,1519684069.652 [Default:CheckIn:E] Stopped
2018-02-26T22:27:49.652Z,1519684069.652 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T22:27:49.652Z,1519684069.652 [Default:CheckIn] Stopped
2018-02-26T22:27:49.652Z,1519684069.652 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T22:27:49.652Z,1519684069.652 [Default:CheckIn](INFO): Running loop #29
2018-02-26T22:27:49.653Z,1519684069.653 [Default:CheckIn] Running Loop=29
2018-02-26T22:27:49.653Z,1519684069.653 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T22:27:49.653Z,1519684069.653 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T22:32:51.344Z,1519684371.344 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T22:27:49.7Z
2018-02-26T22:32:51.344Z,1519684371.344 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T22:32:51.344Z,1519684371.344 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T22:32:56.183Z,1519684376.183 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0116.lzma
2018-02-26T22:32:56.953Z,1519684376.953 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0116.lzma.bak
2018-02-26T22:32:56.953Z,1519684376.953 [DataOverHttps](INFO): SBD MOMSN=7869207
2018-02-26T22:33:05.712Z,1519684385.712 [DataOverHttps](INFO): Sending 217 bytes from file Logs/20180226T173634/Express0117.lzma
2018-02-26T22:33:06.501Z,1519684386.501 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0117.lzma.bak
2018-02-26T22:33:06.501Z,1519684386.501 [DataOverHttps](INFO): SBD MOMSN=7869209
2018-02-26T22:33:06.961Z,1519684386.961 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T22:33:06.961Z,1519684386.961 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T22:33:06.961Z,1519684386.961 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T22:33:52.070Z,1519684432.070 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T22:33:52.070Z,1519684432.070 [NAL9602] Data Fault, FailCount= 2
2018-02-26T22:33:52.070Z,1519684432.070 [NAL9602](ERROR): Data Fault
2018-02-26T22:33:52.115Z,1519684432.115 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T22:33:52.473Z,1519684432.473 [NAL9602](INFO): Powering down
2018-02-26T22:33:53.311Z,1519684433.311 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T22:33:53.311Z,1519684433.311 [NAL9602] No Fault, FailCount= 2
2018-02-26T22:34:22.822Z,1519684462.822 [NAL9602](INFO): Powering up NAL9602
2018-02-26T22:34:34.022Z,1519684474.022 [NAL9602](INFO): NAL9602 initialized
2018-02-26T22:36:51.774Z,1519684611.774 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T22:38:07.728Z,1519684687.728 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T22:38:07.728Z,1519684687.728 [Default:CheckIn:C.Wait] Stopped
2018-02-26T22:38:07.729Z,1519684687.729 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T22:38:07.729Z,1519684687.729 [Default:CheckIn:D] Running Loop=1
2018-02-26T22:38:08.127Z,1519684688.127 [Default:CheckIn:D] Stopped
2018-02-26T22:38:08.127Z,1519684688.127 [Default:CheckIn:E] Running Loop=1
2018-02-26T22:38:08.526Z,1519684688.526 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 298.704492 min 
2018-02-26T22:38:08.527Z,1519684688.527 [Default:CheckIn:E] Stopped
2018-02-26T22:38:08.527Z,1519684688.527 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T22:38:08.527Z,1519684688.527 [Default:CheckIn] Stopped
2018-02-26T22:38:08.527Z,1519684688.527 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T22:38:08.527Z,1519684688.527 [Default:CheckIn](INFO): Running loop #30
2018-02-26T22:38:08.527Z,1519684688.527 [Default:CheckIn] Running Loop=30
2018-02-26T22:38:08.527Z,1519684688.527 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T22:38:08.527Z,1519684688.527 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T22:38:14.528Z,1519684694.528 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:38:14.528Z,1519684694.528 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-02-26T22:38:14.529Z,1519684694.529 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:38:14.529Z,1519684694.529 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-02-26T22:38:14.931Z,1519684694.931 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:38:14.931Z,1519684694.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:38:14.931Z,1519684694.931 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:38:14.932Z,1519684694.932 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:38:14.932Z,1519684694.932 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:38:14.933Z,1519684694.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:41:15.215Z,1519684875.215 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:41:15.215Z,1519684875.215 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-02-26T22:41:15.215Z,1519684875.215 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:41:15.217Z,1519684875.217 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:41:15.217Z,1519684875.217 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-02-26T22:41:15.217Z,1519684875.217 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:41:15.230Z,1519684875.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:41:15.230Z,1519684875.230 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:41:15.615Z,1519684875.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:41:15.615Z,1519684875.615 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-02-26T22:41:15.616Z,1519684875.616 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:41:15.616Z,1519684875.616 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-02-26T22:41:16.010Z,1519684876.010 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:41:16.010Z,1519684876.010 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:41:16.011Z,1519684876.011 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:41:16.011Z,1519684876.011 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:41:16.011Z,1519684876.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:41:16.012Z,1519684876.012 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:43:08.797Z,1519684988.797 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T22:38:08.5Z
2018-02-26T22:43:08.797Z,1519684988.797 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T22:43:08.797Z,1519684988.797 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T22:43:13.166Z,1519684993.166 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0120.lzma
2018-02-26T22:43:13.969Z,1519684993.969 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0120.lzma.bak
2018-02-26T22:43:13.969Z,1519684993.969 [DataOverHttps](INFO): SBD MOMSN=7869215
2018-02-26T22:43:22.713Z,1519685002.713 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0121.lzma
2018-02-26T22:43:23.477Z,1519685003.477 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0121.lzma.bak
2018-02-26T22:43:23.477Z,1519685003.477 [DataOverHttps](INFO): SBD MOMSN=7869217
2018-02-26T22:43:23.956Z,1519685003.956 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T22:43:23.956Z,1519685003.956 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T22:43:23.956Z,1519685003.956 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T22:44:16.287Z,1519685056.287 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:44:16.288Z,1519685056.288 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-02-26T22:44:16.288Z,1519685056.288 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:44:16.289Z,1519685056.289 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:44:16.289Z,1519685056.289 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-02-26T22:44:16.289Z,1519685056.289 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:44:16.301Z,1519685056.301 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:44:16.301Z,1519685056.301 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:44:16.699Z,1519685056.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:44:16.699Z,1519685056.699 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-02-26T22:44:16.699Z,1519685056.699 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:44:16.699Z,1519685056.699 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-02-26T22:44:17.093Z,1519685057.093 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:44:17.093Z,1519685057.093 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:44:17.094Z,1519685057.094 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:44:17.094Z,1519685057.094 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:44:17.094Z,1519685057.094 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:44:17.095Z,1519685057.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:44:36.202Z,1519685076.202 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T22:44:36.202Z,1519685076.202 [NAL9602] Data Fault, FailCount= 3
2018-02-26T22:44:36.202Z,1519685076.202 [NAL9602](ERROR): Data Fault
2018-02-26T22:44:36.282Z,1519685076.282 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T22:44:36.601Z,1519685076.601 [NAL9602](INFO): Powering down
2018-02-26T22:44:37.465Z,1519685077.465 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T22:44:37.465Z,1519685077.465 [NAL9602] No Fault, FailCount= 3
2018-02-26T22:45:06.606Z,1519685106.606 [NAL9602](INFO): Powering up NAL9602
2018-02-26T22:45:17.805Z,1519685117.805 [NAL9602](INFO): NAL9602 initialized
2018-02-26T22:46:51.824Z,1519685211.824 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T22:47:17.386Z,1519685237.386 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:47:17.386Z,1519685237.386 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-02-26T22:47:17.386Z,1519685237.386 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:47:17.421Z,1519685237.421 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:47:17.421Z,1519685237.421 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-02-26T22:47:17.421Z,1519685237.421 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:47:17.438Z,1519685237.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:47:17.438Z,1519685237.438 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:47:17.804Z,1519685237.804 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:47:17.804Z,1519685237.804 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-02-26T22:47:17.805Z,1519685237.805 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:47:17.805Z,1519685237.805 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-02-26T22:47:18.194Z,1519685238.194 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:47:18.195Z,1519685238.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:47:18.195Z,1519685238.195 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:47:18.195Z,1519685238.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:47:18.208Z,1519685238.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:47:18.208Z,1519685238.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:48:24.548Z,1519685304.548 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T22:48:24.548Z,1519685304.548 [Default:CheckIn:C.Wait] Stopped
2018-02-26T22:48:24.548Z,1519685304.548 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T22:48:24.548Z,1519685304.548 [Default:CheckIn:D] Running Loop=1
2018-02-26T22:48:24.950Z,1519685304.950 [Default:CheckIn:D] Stopped
2018-02-26T22:48:24.950Z,1519685304.950 [Default:CheckIn:E] Running Loop=1
2018-02-26T22:48:25.354Z,1519685305.354 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 308.984863 min 
2018-02-26T22:48:25.354Z,1519685305.354 [Default:CheckIn:E] Stopped
2018-02-26T22:48:25.354Z,1519685305.354 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T22:48:25.354Z,1519685305.354 [Default:CheckIn] Stopped
2018-02-26T22:48:25.354Z,1519685305.354 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T22:48:25.354Z,1519685305.354 [Default:CheckIn](INFO): Running loop #31
2018-02-26T22:48:25.354Z,1519685305.354 [Default:CheckIn] Running Loop=31
2018-02-26T22:48:25.355Z,1519685305.355 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T22:48:25.355Z,1519685305.355 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T22:50:18.511Z,1519685418.511 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:50:18.511Z,1519685418.511 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-02-26T22:50:18.511Z,1519685418.511 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:50:18.518Z,1519685418.518 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:50:18.518Z,1519685418.518 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-02-26T22:50:18.518Z,1519685418.518 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:50:18.530Z,1519685418.530 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:50:18.530Z,1519685418.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:50:18.929Z,1519685418.929 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:50:18.929Z,1519685418.929 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-02-26T22:50:18.930Z,1519685418.930 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:50:18.930Z,1519685418.930 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-02-26T22:50:19.308Z,1519685419.308 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:50:19.309Z,1519685419.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:50:19.309Z,1519685419.309 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:50:19.309Z,1519685419.309 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:50:19.310Z,1519685419.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:50:19.310Z,1519685419.310 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:53:19.624Z,1519685599.624 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:53:19.624Z,1519685599.624 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-02-26T22:53:19.636Z,1519685599.636 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:53:19.638Z,1519685599.638 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:53:19.638Z,1519685599.638 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-02-26T22:53:19.638Z,1519685599.638 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:53:19.657Z,1519685599.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:53:19.657Z,1519685599.657 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:53:20.046Z,1519685600.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:53:20.046Z,1519685600.046 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-02-26T22:53:20.046Z,1519685600.046 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:53:20.046Z,1519685600.046 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-02-26T22:53:20.413Z,1519685600.413 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:53:20.414Z,1519685600.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:53:20.414Z,1519685600.414 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:53:20.414Z,1519685600.414 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:53:20.415Z,1519685600.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:53:20.415Z,1519685600.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:53:25.648Z,1519685605.648 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T22:48:25.4Z
2018-02-26T22:53:25.648Z,1519685605.648 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T22:53:25.649Z,1519685605.649 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T22:53:29.939Z,1519685609.939 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0124.lzma
2018-02-26T22:53:30.737Z,1519685610.737 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0124.lzma.bak
2018-02-26T22:53:30.737Z,1519685610.737 [DataOverHttps](INFO): SBD MOMSN=7869221
2018-02-26T22:53:39.496Z,1519685619.496 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0125.lzma
2018-02-26T22:53:40.297Z,1519685620.297 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0125.lzma.bak
2018-02-26T22:53:40.297Z,1519685620.297 [DataOverHttps](INFO): SBD MOMSN=7869223
2018-02-26T22:53:40.788Z,1519685620.788 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T22:53:40.788Z,1519685620.788 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T22:53:40.788Z,1519685620.788 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T22:55:19.878Z,1519685719.878 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T22:55:19.878Z,1519685719.878 [NAL9602] Data Fault, FailCount= 4
2018-02-26T22:55:19.878Z,1519685719.878 [NAL9602](ERROR): Data Fault
2018-02-26T22:55:19.953Z,1519685719.953 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T22:55:20.278Z,1519685720.278 [NAL9602](INFO): Powering down
2018-02-26T22:55:21.136Z,1519685721.136 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T22:55:21.136Z,1519685721.136 [NAL9602] No Fault, FailCount= 4
2018-02-26T22:55:50.638Z,1519685750.638 [NAL9602](INFO): Powering up NAL9602
2018-02-26T22:56:01.838Z,1519685761.838 [NAL9602](INFO): NAL9602 initialized
2018-02-26T22:56:20.704Z,1519685780.704 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:56:20.704Z,1519685780.704 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-02-26T22:56:20.705Z,1519685780.705 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:56:20.706Z,1519685780.706 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:56:20.706Z,1519685780.706 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-02-26T22:56:20.706Z,1519685780.706 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:56:20.726Z,1519685780.726 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:56:20.727Z,1519685780.727 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:56:21.129Z,1519685781.129 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:56:21.129Z,1519685781.129 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-02-26T22:56:21.129Z,1519685781.129 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:56:21.129Z,1519685781.129 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-02-26T22:56:21.477Z,1519685781.477 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:56:21.477Z,1519685781.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:56:21.477Z,1519685781.477 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:56:21.478Z,1519685781.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:56:21.478Z,1519685781.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:56:21.478Z,1519685781.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:56:51.897Z,1519685811.897 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T22:58:41.457Z,1519685921.457 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T22:58:41.457Z,1519685921.457 [Default:CheckIn:C.Wait] Stopped
2018-02-26T22:58:41.457Z,1519685921.457 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T22:58:41.457Z,1519685921.457 [Default:CheckIn:D] Running Loop=1
2018-02-26T22:58:41.844Z,1519685921.844 [Default:CheckIn:D] Stopped
2018-02-26T22:58:41.844Z,1519685921.844 [Default:CheckIn:E] Running Loop=1
2018-02-26T22:58:42.251Z,1519685922.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 319.266439 min 
2018-02-26T22:58:42.252Z,1519685922.252 [Default:CheckIn:E] Stopped
2018-02-26T22:58:42.252Z,1519685922.252 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T22:58:42.252Z,1519685922.252 [Default:CheckIn] Stopped
2018-02-26T22:58:42.252Z,1519685922.252 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T22:58:42.252Z,1519685922.252 [Default:CheckIn](INFO): Running loop #32
2018-02-26T22:58:42.252Z,1519685922.252 [Default:CheckIn] Running Loop=32
2018-02-26T22:58:42.252Z,1519685922.252 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T22:58:42.252Z,1519685922.252 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T22:59:21.819Z,1519685961.819 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:59:21.820Z,1519685961.820 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-02-26T22:59:21.820Z,1519685961.820 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T22:59:21.821Z,1519685961.821 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T22:59:21.822Z,1519685961.822 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-02-26T22:59:21.822Z,1519685961.822 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T22:59:21.841Z,1519685961.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T22:59:21.842Z,1519685961.842 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T22:59:22.226Z,1519685962.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T22:59:22.226Z,1519685962.226 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-02-26T22:59:22.226Z,1519685962.226 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T22:59:22.226Z,1519685962.226 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-02-26T22:59:22.616Z,1519685962.616 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T22:59:22.617Z,1519685962.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:59:22.617Z,1519685962.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T22:59:22.617Z,1519685962.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T22:59:22.618Z,1519685962.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T22:59:22.618Z,1519685962.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:02:22.971Z,1519686142.971 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:02:22.972Z,1519686142.972 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-02-26T23:02:22.972Z,1519686142.972 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:02:22.978Z,1519686142.977 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:02:22.978Z,1519686142.978 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-02-26T23:02:22.978Z,1519686142.978 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:02:23.001Z,1519686143.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:02:23.004Z,1519686143.004 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:02:23.371Z,1519686143.371 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:02:23.371Z,1519686143.371 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-02-26T23:02:23.371Z,1519686143.371 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:02:23.371Z,1519686143.371 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-02-26T23:02:23.758Z,1519686143.758 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:02:23.758Z,1519686143.758 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:02:23.758Z,1519686143.758 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:02:23.759Z,1519686143.759 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:02:23.759Z,1519686143.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:02:23.759Z,1519686143.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:03:42.544Z,1519686222.544 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T22:58:42.3Z
2018-02-26T23:03:42.544Z,1519686222.544 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T23:03:42.544Z,1519686222.544 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T23:03:46.914Z,1519686226.914 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0128.lzma
2018-02-26T23:03:47.713Z,1519686227.713 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0128.lzma.bak
2018-02-26T23:03:47.713Z,1519686227.713 [DataOverHttps](INFO): SBD MOMSN=7869227
2018-02-26T23:03:56.476Z,1519686236.476 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0129.lzma
2018-02-26T23:03:57.269Z,1519686237.269 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0129.lzma.bak
2018-02-26T23:03:57.269Z,1519686237.269 [DataOverHttps](INFO): SBD MOMSN=7869229
2018-02-26T23:03:57.729Z,1519686237.729 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T23:03:57.729Z,1519686237.729 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T23:03:57.729Z,1519686237.729 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T23:05:24.066Z,1519686324.066 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:05:24.067Z,1519686324.067 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-02-26T23:05:24.067Z,1519686324.067 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:05:24.068Z,1519686324.068 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:05:24.068Z,1519686324.068 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-02-26T23:05:24.068Z,1519686324.068 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:05:24.108Z,1519686324.108 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:05:24.108Z,1519686324.108 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:05:24.495Z,1519686324.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:05:24.495Z,1519686324.495 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-02-26T23:05:24.496Z,1519686324.496 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:05:24.496Z,1519686324.496 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-02-26T23:05:24.866Z,1519686324.866 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:05:24.867Z,1519686324.867 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:05:24.867Z,1519686324.867 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:05:24.867Z,1519686324.867 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:05:24.868Z,1519686324.868 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:05:24.872Z,1519686324.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:06:02.778Z,1519686362.778 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T23:06:02.778Z,1519686362.778 [NAL9602] Data Fault, FailCount= 5
2018-02-26T23:06:02.778Z,1519686362.778 [NAL9602](ERROR): Data Fault
2018-02-26T23:06:02.853Z,1519686362.853 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T23:06:02.853Z,1519686362.853 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-02-26T23:06:03.173Z,1519686363.173 [NAL9602](INFO): Powering down
2018-02-26T23:06:03.234Z,1519686363.234 [CBIT](INFO): Critical error at 20180226T230602
2018-02-26T23:06:52.048Z,1519686412.048 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T23:08:02.830Z,1519686482.830 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T23:08:02.830Z,1519686482.830 [NAL9602] No Fault, FailCount= 5
2018-02-26T23:08:03.101Z,1519686483.101 [NAL9602](INFO): Powering up NAL9602
2018-02-26T23:08:14.294Z,1519686494.294 [NAL9602](INFO): NAL9602 initialized
2018-02-26T23:08:25.147Z,1519686505.147 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:08:25.147Z,1519686505.147 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-02-26T23:08:25.147Z,1519686505.147 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:08:25.149Z,1519686505.149 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:08:25.149Z,1519686505.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-02-26T23:08:25.149Z,1519686505.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:08:25.183Z,1519686505.183 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:08:25.183Z,1519686505.183 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:08:25.560Z,1519686505.560 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:08:25.560Z,1519686505.560 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-02-26T23:08:25.561Z,1519686505.561 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:08:25.561Z,1519686505.561 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-02-26T23:08:25.936Z,1519686505.936 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:08:25.936Z,1519686505.936 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:08:25.937Z,1519686505.937 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:08:25.937Z,1519686505.937 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:08:25.937Z,1519686505.937 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:08:25.938Z,1519686505.938 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:08:58.344Z,1519686538.344 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T23:08:58.344Z,1519686538.344 [Default:CheckIn:C.Wait] Stopped
2018-02-26T23:08:58.344Z,1519686538.344 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T23:08:58.344Z,1519686538.344 [Default:CheckIn:D] Running Loop=1
2018-02-26T23:08:58.741Z,1519686538.741 [Default:CheckIn:D] Stopped
2018-02-26T23:08:58.741Z,1519686538.741 [Default:CheckIn:E] Running Loop=1
2018-02-26T23:08:59.142Z,1519686539.142 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 329.548047 min 
2018-02-26T23:08:59.143Z,1519686539.143 [Default:CheckIn:E] Stopped
2018-02-26T23:08:59.143Z,1519686539.143 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T23:08:59.143Z,1519686539.143 [Default:CheckIn] Stopped
2018-02-26T23:08:59.143Z,1519686539.143 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T23:08:59.143Z,1519686539.143 [Default:CheckIn](INFO): Running loop #33
2018-02-26T23:08:59.143Z,1519686539.143 [Default:CheckIn] Running Loop=33
2018-02-26T23:08:59.143Z,1519686539.143 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T23:08:59.143Z,1519686539.143 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T23:11:26.260Z,1519686686.260 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:11:26.260Z,1519686686.260 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-02-26T23:11:26.260Z,1519686686.260 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:11:26.262Z,1519686686.262 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:11:26.262Z,1519686686.262 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-02-26T23:11:26.262Z,1519686686.262 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:11:26.274Z,1519686686.274 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:11:26.274Z,1519686686.274 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:11:26.657Z,1519686686.657 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:11:26.657Z,1519686686.657 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-02-26T23:11:26.657Z,1519686686.657 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:11:26.657Z,1519686686.657 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-02-26T23:11:27.058Z,1519686687.058 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:11:27.058Z,1519686687.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:11:27.058Z,1519686687.058 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:11:27.059Z,1519686687.059 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:11:27.059Z,1519686687.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:11:27.059Z,1519686687.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:13:59.408Z,1519686839.408 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T23:08:59.1Z
2018-02-26T23:13:59.408Z,1519686839.408 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T23:13:59.408Z,1519686839.408 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T23:14:03.722Z,1519686843.722 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180226T173634/Courier0132.lzma
2018-02-26T23:14:04.513Z,1519686844.513 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0132.lzma.bak
2018-02-26T23:14:04.513Z,1519686844.513 [DataOverHttps](INFO): SBD MOMSN=7869233
2018-02-26T23:14:13.240Z,1519686853.240 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0133.lzma
2018-02-26T23:14:14.041Z,1519686854.041 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0133.lzma.bak
2018-02-26T23:14:14.041Z,1519686854.041 [DataOverHttps](INFO): SBD MOMSN=7869236
2018-02-26T23:14:14.526Z,1519686854.526 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T23:14:14.526Z,1519686854.526 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T23:14:14.526Z,1519686854.526 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T23:14:27.252Z,1519686867.252 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:14:27.252Z,1519686867.252 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-02-26T23:14:27.252Z,1519686867.252 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:14:27.254Z,1519686867.254 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:14:27.254Z,1519686867.254 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-02-26T23:14:27.254Z,1519686867.254 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:14:27.285Z,1519686867.285 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:14:27.286Z,1519686867.286 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:14:27.678Z,1519686867.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:14:27.678Z,1519686867.678 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-02-26T23:14:27.678Z,1519686867.678 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:14:27.678Z,1519686867.678 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-02-26T23:14:28.053Z,1519686868.053 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:14:28.054Z,1519686868.054 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:14:28.054Z,1519686868.054 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:14:28.054Z,1519686868.054 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:14:28.055Z,1519686868.055 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:14:28.055Z,1519686868.055 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:16:52.466Z,1519687012.466 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T23:17:28.401Z,1519687048.401 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:17:28.401Z,1519687048.401 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-02-26T23:17:28.401Z,1519687048.401 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:17:28.403Z,1519687048.403 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:17:28.403Z,1519687048.403 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-02-26T23:17:28.403Z,1519687048.403 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:17:28.432Z,1519687048.432 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:17:28.436Z,1519687048.436 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:17:28.845Z,1519687048.845 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:17:28.845Z,1519687048.845 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-02-26T23:17:28.845Z,1519687048.845 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:17:28.846Z,1519687048.846 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-02-26T23:17:29.209Z,1519687049.209 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:17:29.210Z,1519687049.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:17:29.210Z,1519687049.210 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:17:29.210Z,1519687049.210 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:17:29.211Z,1519687049.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:17:29.211Z,1519687049.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:18:15.173Z,1519687095.173 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T23:18:15.173Z,1519687095.173 [NAL9602] Data Fault, FailCount= 1
2018-02-26T23:18:15.173Z,1519687095.173 [NAL9602](ERROR): Data Fault
2018-02-26T23:18:15.253Z,1519687095.253 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T23:18:15.570Z,1519687095.570 [NAL9602](INFO): Powering down
2018-02-26T23:18:19.114Z,1519687099.114 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T23:18:19.114Z,1519687099.114 [NAL9602] No Fault, FailCount= 1
2018-02-26T23:18:45.922Z,1519687125.922 [NAL9602](INFO): Powering up NAL9602
2018-02-26T23:18:57.122Z,1519687137.122 [NAL9602](INFO): NAL9602 initialized
2018-02-26T23:19:15.160Z,1519687155.160 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T23:19:15.160Z,1519687155.160 [Default:CheckIn:C.Wait] Stopped
2018-02-26T23:19:15.161Z,1519687155.161 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T23:19:15.161Z,1519687155.161 [Default:CheckIn:D] Running Loop=1
2018-02-26T23:19:15.596Z,1519687155.596 [Default:CheckIn:D] Stopped
2018-02-26T23:19:15.596Z,1519687155.596 [Default:CheckIn:E] Running Loop=1
2018-02-26T23:19:15.995Z,1519687155.995 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 339.828906 min 
2018-02-26T23:19:15.995Z,1519687155.995 [Default:CheckIn:E] Stopped
2018-02-26T23:19:15.995Z,1519687155.995 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T23:19:15.995Z,1519687155.995 [Default:CheckIn] Stopped
2018-02-26T23:19:15.995Z,1519687155.995 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T23:19:15.995Z,1519687155.995 [Default:CheckIn](INFO): Running loop #34
2018-02-26T23:19:15.996Z,1519687155.996 [Default:CheckIn] Running Loop=34
2018-02-26T23:19:15.996Z,1519687155.996 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T23:19:15.996Z,1519687155.996 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T23:20:29.537Z,1519687229.537 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:20:29.537Z,1519687229.537 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-02-26T23:20:29.537Z,1519687229.537 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:20:29.539Z,1519687229.539 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:20:29.539Z,1519687229.539 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-02-26T23:20:29.539Z,1519687229.539 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:20:29.555Z,1519687229.555 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:20:29.555Z,1519687229.555 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:20:29.933Z,1519687229.933 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:20:29.933Z,1519687229.933 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-02-26T23:20:29.934Z,1519687229.934 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:20:29.934Z,1519687229.934 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-02-26T23:20:30.332Z,1519687230.332 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:20:30.333Z,1519687230.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:20:30.333Z,1519687230.333 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:20:30.334Z,1519687230.334 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:20:30.334Z,1519687230.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:20:30.334Z,1519687230.334 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:23:30.655Z,1519687410.655 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:23:30.655Z,1519687410.655 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 15
2018-02-26T23:23:30.655Z,1519687410.655 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:23:30.657Z,1519687410.657 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:23:30.657Z,1519687410.657 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2018-02-26T23:23:30.657Z,1519687410.657 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:23:30.670Z,1519687410.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:23:30.670Z,1519687410.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:23:31.065Z,1519687411.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:23:31.065Z,1519687411.065 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 15
2018-02-26T23:23:31.065Z,1519687411.065 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:23:31.065Z,1519687411.065 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2018-02-26T23:23:31.454Z,1519687411.454 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:23:31.454Z,1519687411.454 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:23:31.455Z,1519687411.455 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:23:31.455Z,1519687411.455 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:23:31.456Z,1519687411.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:23:31.456Z,1519687411.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:24:16.244Z,1519687456.244 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T23:19:15.0Z
2018-02-26T23:24:16.244Z,1519687456.244 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T23:24:16.244Z,1519687456.244 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T23:24:20.614Z,1519687460.614 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0136.lzma
2018-02-26T23:24:21.405Z,1519687461.405 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0136.lzma.bak
2018-02-26T23:24:21.405Z,1519687461.405 [DataOverHttps](INFO): SBD MOMSN=7869240
2018-02-26T23:24:30.149Z,1519687470.149 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0137.lzma
2018-02-26T23:24:30.925Z,1519687470.925 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0137.lzma.bak
2018-02-26T23:24:30.925Z,1519687470.925 [DataOverHttps](INFO): SBD MOMSN=7869242
2018-02-26T23:24:31.412Z,1519687471.412 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T23:24:31.412Z,1519687471.412 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T23:24:31.412Z,1519687471.412 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T23:26:31.747Z,1519687591.747 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:26:31.747Z,1519687591.747 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 16
2018-02-26T23:26:31.747Z,1519687591.747 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:26:31.749Z,1519687591.749 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:26:31.749Z,1519687591.749 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2018-02-26T23:26:31.749Z,1519687591.749 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:26:31.761Z,1519687591.761 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:26:31.761Z,1519687591.761 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:26:32.162Z,1519687592.162 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:26:32.162Z,1519687592.162 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 16
2018-02-26T23:26:32.163Z,1519687592.163 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:26:32.163Z,1519687592.163 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2018-02-26T23:26:32.563Z,1519687592.563 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:26:32.564Z,1519687592.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:26:32.564Z,1519687592.564 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:26:32.565Z,1519687592.565 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:26:32.565Z,1519687592.565 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:26:32.565Z,1519687592.565 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:26:52.558Z,1519687612.558 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T23:28:58.490Z,1519687738.490 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T23:28:58.490Z,1519687738.490 [NAL9602] Data Fault, FailCount= 2
2018-02-26T23:28:58.490Z,1519687738.490 [NAL9602](ERROR): Data Fault
2018-02-26T23:28:58.579Z,1519687738.579 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T23:28:58.894Z,1519687738.894 [NAL9602](INFO): Powering down
2018-02-26T23:28:59.751Z,1519687739.751 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T23:28:59.751Z,1519687739.751 [NAL9602] No Fault, FailCount= 2
2018-02-26T23:29:29.302Z,1519687769.302 [NAL9602](INFO): Powering up NAL9602
2018-02-26T23:29:32.127Z,1519687772.127 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T23:29:32.127Z,1519687772.127 [Default:CheckIn:C.Wait] Stopped
2018-02-26T23:29:32.127Z,1519687772.127 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T23:29:32.127Z,1519687772.127 [Default:CheckIn:D] Running Loop=1
2018-02-26T23:29:32.539Z,1519687772.539 [Default:CheckIn:D] Stopped
2018-02-26T23:29:32.539Z,1519687772.539 [Default:CheckIn:E] Running Loop=1
2018-02-26T23:29:32.935Z,1519687772.935 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:29:32.935Z,1519687772.935 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 17
2018-02-26T23:29:32.935Z,1519687772.935 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:29:32.937Z,1519687772.937 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:29:32.937Z,1519687772.937 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2018-02-26T23:29:32.937Z,1519687772.937 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:29:32.939Z,1519687772.939 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 350.111361 min 
2018-02-26T23:29:32.939Z,1519687772.939 [Default:CheckIn:E] Stopped
2018-02-26T23:29:32.939Z,1519687772.939 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T23:29:32.939Z,1519687772.939 [Default:CheckIn] Stopped
2018-02-26T23:29:32.939Z,1519687772.939 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T23:29:32.940Z,1519687772.940 [Default:CheckIn](INFO): Running loop #35
2018-02-26T23:29:32.940Z,1519687772.940 [Default:CheckIn] Running Loop=35
2018-02-26T23:29:32.940Z,1519687772.940 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T23:29:32.940Z,1519687772.940 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T23:29:32.982Z,1519687772.982 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:29:32.982Z,1519687772.982 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:29:33.349Z,1519687773.349 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:29:33.349Z,1519687773.349 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 17
2018-02-26T23:29:33.349Z,1519687773.349 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:29:33.349Z,1519687773.349 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2018-02-26T23:29:36.436Z,1519687776.436 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:29:36.436Z,1519687776.436 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:29:36.437Z,1519687776.437 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:29:36.437Z,1519687776.437 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:29:36.437Z,1519687776.437 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:29:36.438Z,1519687776.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:29:40.458Z,1519687780.458 [NAL9602](INFO): NAL9602 initialized
2018-02-26T23:32:37.547Z,1519687957.547 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:32:37.547Z,1519687957.547 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 18
2018-02-26T23:32:37.547Z,1519687957.547 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:32:37.549Z,1519687957.549 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:32:37.549Z,1519687957.549 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2018-02-26T23:32:37.549Z,1519687957.549 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:32:37.561Z,1519687957.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:32:37.561Z,1519687957.561 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:32:37.687Z,1519687957.687 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:32:37.687Z,1519687957.687 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 18
2018-02-26T23:32:37.693Z,1519687957.693 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:32:37.693Z,1519687957.693 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2018-02-26T23:32:38.035Z,1519687958.035 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:32:38.035Z,1519687958.035 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:32:38.035Z,1519687958.035 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:32:38.036Z,1519687958.036 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:32:38.036Z,1519687958.036 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:32:38.036Z,1519687958.036 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:34:33.188Z,1519688073.188 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T23:29:32.9Z
2018-02-26T23:34:33.188Z,1519688073.188 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T23:34:33.188Z,1519688073.188 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T23:34:37.542Z,1519688077.542 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0140.lzma
2018-02-26T23:34:38.313Z,1519688078.313 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0140.lzma.bak
2018-02-26T23:34:38.313Z,1519688078.313 [DataOverHttps](INFO): SBD MOMSN=7869246
2018-02-26T23:34:47.103Z,1519688087.103 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0141.lzma
2018-02-26T23:34:47.881Z,1519688087.881 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0141.lzma.bak
2018-02-26T23:34:47.881Z,1519688087.881 [DataOverHttps](INFO): SBD MOMSN=7869248
2018-02-26T23:34:48.362Z,1519688088.362 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T23:34:48.362Z,1519688088.362 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T23:34:48.362Z,1519688088.362 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T23:35:38.344Z,1519688138.344 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:35:38.344Z,1519688138.344 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 19
2018-02-26T23:35:38.344Z,1519688138.344 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:35:38.346Z,1519688138.346 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:35:38.346Z,1519688138.346 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2018-02-26T23:35:38.346Z,1519688138.346 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:35:38.370Z,1519688138.370 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:35:38.370Z,1519688138.370 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:35:38.743Z,1519688138.743 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:35:38.743Z,1519688138.743 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 19
2018-02-26T23:35:38.743Z,1519688138.743 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:35:38.743Z,1519688138.743 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2018-02-26T23:35:39.138Z,1519688139.138 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:35:39.138Z,1519688139.138 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:35:39.139Z,1519688139.139 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:35:39.139Z,1519688139.139 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:35:39.139Z,1519688139.139 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:35:39.140Z,1519688139.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:36:52.602Z,1519688212.602 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T23:37:19.071Z,1519688239.071 [CBIT](IMPORTANT): Beginning ground fault scan
2018-02-26T23:37:29.873Z,1519688249.873 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134186
CHAN A1 (24V): -0.004438
CHAN A2 (12V): -0.002142
CHAN A3 (5V): -0.001422
CHAN B0 (3.3V): -0.000225
CHAN B1 (3.15aV): -0.000072
CHAN B2 (3.15bV): -0.000875
CHAN B3 (GND): 0.000124
OPEN: -0.000332
Full Scale Calc: 4.765 mA, -1.589 mA
2018-02-26T23:38:39.429Z,1519688319.429 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:38:39.429Z,1519688319.429 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 20
2018-02-26T23:38:39.429Z,1519688319.429 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:38:39.431Z,1519688319.431 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:38:39.431Z,1519688319.431 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2018-02-26T23:38:39.431Z,1519688319.431 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:38:39.443Z,1519688319.443 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:38:39.443Z,1519688319.443 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:38:39.443Z,1519688319.443 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:38:39.443Z,1519688319.443 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:39:42.958Z,1519688382.958 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T23:39:42.958Z,1519688382.958 [NAL9602] Data Fault, FailCount= 3
2018-02-26T23:39:42.958Z,1519688382.958 [NAL9602](ERROR): Data Fault
2018-02-26T23:39:43.041Z,1519688383.041 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T23:39:43.357Z,1519688383.357 [NAL9602](INFO): Powering down
2018-02-26T23:39:44.219Z,1519688384.219 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T23:39:44.219Z,1519688384.219 [NAL9602] No Fault, FailCount= 3
2018-02-26T23:39:49.010Z,1519688389.010 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T23:39:49.010Z,1519688389.010 [Default:CheckIn:C.Wait] Stopped
2018-02-26T23:39:49.010Z,1519688389.010 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T23:39:49.010Z,1519688389.010 [Default:CheckIn:D] Running Loop=1
2018-02-26T23:39:49.410Z,1519688389.410 [Default:CheckIn:D] Stopped
2018-02-26T23:39:49.410Z,1519688389.410 [Default:CheckIn:E] Running Loop=1
2018-02-26T23:39:49.803Z,1519688389.803 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 360.392513 min 
2018-02-26T23:39:49.803Z,1519688389.803 [Default:CheckIn:E] Stopped
2018-02-26T23:39:49.803Z,1519688389.803 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T23:39:49.803Z,1519688389.803 [Default:CheckIn] Stopped
2018-02-26T23:39:49.803Z,1519688389.803 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T23:39:49.803Z,1519688389.803 [Default:CheckIn](INFO): Running loop #36
2018-02-26T23:39:49.804Z,1519688389.804 [Default:CheckIn] Running Loop=36
2018-02-26T23:39:49.804Z,1519688389.804 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T23:39:49.808Z,1519688389.808 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T23:40:13.738Z,1519688413.738 [NAL9602](INFO): Powering up NAL9602
2018-02-26T23:40:24.938Z,1519688424.938 [NAL9602](INFO): NAL9602 initialized
2018-02-26T23:44:50.059Z,1519688690.059 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T23:39:49.8Z
2018-02-26T23:44:50.059Z,1519688690.059 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T23:44:50.059Z,1519688690.059 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T23:44:54.453Z,1519688694.453 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20180226T173634/Courier0144.lzma
2018-02-26T23:44:55.233Z,1519688695.233 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0144.lzma.bak
2018-02-26T23:44:55.233Z,1519688695.233 [DataOverHttps](INFO): SBD MOMSN=7869252
2018-02-26T23:45:04.289Z,1519688704.289 [DataOverHttps](INFO): Sending 396 bytes from file Logs/20180226T173634/Express0145.lzma
2018-02-26T23:45:05.077Z,1519688705.077 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0145.lzma.bak
2018-02-26T23:45:05.077Z,1519688705.077 [DataOverHttps](INFO): SBD MOMSN=7869254
2018-02-26T23:45:05.638Z,1519688705.638 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T23:45:05.638Z,1519688705.638 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T23:45:05.638Z,1519688705.638 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T23:46:52.653Z,1519688812.653 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T23:50:06.186Z,1519689006.186 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-26T23:50:06.186Z,1519689006.186 [Default:CheckIn:C.Wait] Stopped
2018-02-26T23:50:06.186Z,1519689006.186 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-26T23:50:06.186Z,1519689006.186 [Default:CheckIn:D] Running Loop=1
2018-02-26T23:50:06.590Z,1519689006.590 [Default:CheckIn:D] Stopped
2018-02-26T23:50:06.590Z,1519689006.590 [Default:CheckIn:E] Running Loop=1
2018-02-26T23:50:06.985Z,1519689006.985 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 370.678874 min 
2018-02-26T23:50:06.985Z,1519689006.985 [Default:CheckIn:E] Stopped
2018-02-26T23:50:06.985Z,1519689006.985 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-26T23:50:06.985Z,1519689006.985 [Default:CheckIn] Stopped
2018-02-26T23:50:06.985Z,1519689006.985 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-26T23:50:06.985Z,1519689006.985 [Default:CheckIn](INFO): Running loop #37
2018-02-26T23:50:06.985Z,1519689006.985 [Default:CheckIn] Running Loop=37
2018-02-26T23:50:06.985Z,1519689006.985 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-26T23:50:06.986Z,1519689006.986 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-26T23:50:28.102Z,1519689028.102 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-26T23:50:28.102Z,1519689028.102 [NAL9602] Data Fault, FailCount= 4
2018-02-26T23:50:28.102Z,1519689028.102 [NAL9602](ERROR): Data Fault
2018-02-26T23:50:28.174Z,1519689028.174 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-26T23:50:28.501Z,1519689028.501 [NAL9602](INFO): Powering down
2018-02-26T23:50:29.349Z,1519689029.349 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-26T23:50:29.349Z,1519689029.349 [NAL9602] No Fault, FailCount= 4
2018-02-26T23:50:58.902Z,1519689058.902 [NAL9602](INFO): Powering up NAL9602
2018-02-26T23:51:11.686Z,1519689071.686 [NAL9602](INFO): NAL9602 initialized
2018-02-26T23:53:39.697Z,1519689219.697 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:53:39.697Z,1519689219.697 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 20
2018-02-26T23:53:39.698Z,1519689219.698 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:53:39.698Z,1519689219.698 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2018-02-26T23:53:40.075Z,1519689220.075 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:53:40.076Z,1519689220.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:53:40.076Z,1519689220.076 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:53:40.076Z,1519689220.076 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:53:40.077Z,1519689220.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:53:40.077Z,1519689220.077 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:55:07.299Z,1519689307.299 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-26T23:50:06.0Z
2018-02-26T23:55:07.299Z,1519689307.299 [Default:CheckIn:Read_GPS] Stopped
2018-02-26T23:55:07.299Z,1519689307.299 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-26T23:55:13.532Z,1519689313.532 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0148.lzma
2018-02-26T23:55:14.333Z,1519689314.333 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0148.lzma.bak
2018-02-26T23:55:14.333Z,1519689314.333 [DataOverHttps](INFO): SBD MOMSN=7869262
2018-02-26T23:55:23.092Z,1519689323.092 [DataOverHttps](INFO): Sending 140 bytes from file Logs/20180226T173634/Express0149.lzma
2018-02-26T23:55:23.881Z,1519689323.881 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0149.lzma.bak
2018-02-26T23:55:23.881Z,1519689323.881 [DataOverHttps](INFO): SBD MOMSN=7869264
2018-02-26T23:55:24.350Z,1519689324.350 [Default:CheckIn:Read_Iridium] Stopped
2018-02-26T23:55:24.350Z,1519689324.350 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-26T23:55:24.350Z,1519689324.350 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-26T23:56:40.293Z,1519689400.293 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:56:40.293Z,1519689400.293 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2018-02-26T23:56:40.293Z,1519689400.293 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:56:40.295Z,1519689400.295 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:56:40.295Z,1519689400.295 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2018-02-26T23:56:40.295Z,1519689400.295 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:56:40.307Z,1519689400.307 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:56:40.307Z,1519689400.307 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:56:40.713Z,1519689400.713 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:56:40.713Z,1519689400.713 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2018-02-26T23:56:40.714Z,1519689400.714 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:56:40.714Z,1519689400.714 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2018-02-26T23:56:41.093Z,1519689401.093 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:56:41.094Z,1519689401.094 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:56:41.094Z,1519689401.094 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:56:41.095Z,1519689401.095 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:56:41.095Z,1519689401.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:56:41.095Z,1519689401.095 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:56:52.725Z,1519689412.725 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-26T23:59:41.458Z,1519689581.458 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:59:41.459Z,1519689581.459 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2018-02-26T23:59:41.459Z,1519689581.459 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-26T23:59:41.460Z,1519689581.460 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-26T23:59:41.460Z,1519689581.460 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2018-02-26T23:59:41.460Z,1519689581.460 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-26T23:59:41.504Z,1519689581.504 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-26T23:59:41.504Z,1519689581.504 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-26T23:59:41.866Z,1519689581.866 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-26T23:59:41.866Z,1519689581.866 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2018-02-26T23:59:41.867Z,1519689581.867 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-26T23:59:41.867Z,1519689581.867 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2018-02-26T23:59:42.245Z,1519689582.245 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-26T23:59:42.245Z,1519689582.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:59:42.245Z,1519689582.245 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-26T23:59:42.246Z,1519689582.246 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-26T23:59:42.246Z,1519689582.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-26T23:59:42.246Z,1519689582.246 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:00:25.059Z,1519689625.059 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-27T00:00:25.059Z,1519689625.059 [Default:CheckIn:C.Wait] Stopped
2018-02-27T00:00:25.059Z,1519689625.059 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-27T00:00:25.060Z,1519689625.060 [Default:CheckIn:D] Running Loop=1
2018-02-27T00:00:25.451Z,1519689625.451 [Default:CheckIn:D] Stopped
2018-02-27T00:00:25.451Z,1519689625.451 [Default:CheckIn:E] Running Loop=1
2018-02-27T00:00:25.861Z,1519689625.861 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 380.993197 min 
2018-02-27T00:00:25.861Z,1519689625.861 [Default:CheckIn:E] Stopped
2018-02-27T00:00:25.861Z,1519689625.861 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-27T00:00:25.861Z,1519689625.861 [Default:CheckIn] Stopped
2018-02-27T00:00:25.861Z,1519689625.861 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-27T00:00:25.862Z,1519689625.862 [Default:CheckIn](INFO): Running loop #38
2018-02-27T00:00:25.862Z,1519689625.862 [Default:CheckIn] Running Loop=38
2018-02-27T00:00:25.862Z,1519689625.862 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-27T00:00:25.862Z,1519689625.862 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-27T00:01:12.590Z,1519689672.590 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-27T00:01:12.590Z,1519689672.590 [NAL9602] Data Fault, FailCount= 5
2018-02-27T00:01:12.590Z,1519689672.590 [NAL9602](ERROR): Data Fault
2018-02-27T00:01:12.671Z,1519689672.671 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-27T00:01:12.671Z,1519689672.671 [CBIT](CRITICAL): Data Fault in component: NAL9602
2018-02-27T00:01:12.986Z,1519689672.986 [NAL9602](INFO): Powering down
2018-02-27T00:01:13.058Z,1519689673.058 [CBIT](INFO): Critical error at 20180227T000112
2018-02-27T00:02:42.586Z,1519689762.586 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:02:42.586Z,1519689762.586 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2018-02-27T00:02:42.586Z,1519689762.586 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:02:42.588Z,1519689762.588 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:02:42.588Z,1519689762.588 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2018-02-27T00:02:42.588Z,1519689762.588 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:02:42.633Z,1519689762.633 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:02:42.633Z,1519689762.633 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:02:42.989Z,1519689762.989 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:02:42.989Z,1519689762.989 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2018-02-27T00:02:42.989Z,1519689762.989 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:02:42.989Z,1519689762.989 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2018-02-27T00:02:43.383Z,1519689763.383 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:02:43.383Z,1519689763.383 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:02:43.384Z,1519689763.384 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:02:43.384Z,1519689763.384 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:02:43.385Z,1519689763.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:02:43.385Z,1519689763.385 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:03:12.603Z,1519689792.603 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-27T00:03:12.603Z,1519689792.603 [NAL9602] No Fault, FailCount= 5
2018-02-27T00:03:12.942Z,1519689792.942 [NAL9602](INFO): Powering up NAL9602
2018-02-27T00:03:24.142Z,1519689804.142 [NAL9602](INFO): NAL9602 initialized
2018-02-27T00:05:26.153Z,1519689926.153 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-27T00:00:25.9Z
2018-02-27T00:05:26.153Z,1519689926.153 [Default:CheckIn:Read_GPS] Stopped
2018-02-27T00:05:26.153Z,1519689926.153 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-27T00:05:30.566Z,1519689930.566 [DataOverHttps](INFO): Sending 69 bytes from file Logs/20180226T173634/Courier0152.lzma
2018-02-27T00:05:31.313Z,1519689931.313 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0152.lzma.bak
2018-02-27T00:05:31.313Z,1519689931.313 [DataOverHttps](INFO): SBD MOMSN=7869268
2018-02-27T00:05:40.082Z,1519689940.082 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0153.lzma
2018-02-27T00:05:40.845Z,1519689940.845 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0153.lzma.bak
2018-02-27T00:05:40.845Z,1519689940.845 [DataOverHttps](INFO): SBD MOMSN=7869271
2018-02-27T00:05:41.321Z,1519689941.321 [Default:CheckIn:Read_Iridium] Stopped
2018-02-27T00:05:41.322Z,1519689941.322 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-27T00:05:41.322Z,1519689941.322 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-27T00:05:44.789Z,1519689944.789 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:05:44.789Z,1519689944.789 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 4
2018-02-27T00:05:44.789Z,1519689944.789 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:05:44.791Z,1519689944.791 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:05:44.791Z,1519689944.791 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2018-02-27T00:05:44.791Z,1519689944.791 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:05:44.841Z,1519689944.841 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:05:44.841Z,1519689944.841 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:05:44.948Z,1519689944.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:05:44.948Z,1519689944.948 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 4
2018-02-27T00:05:44.949Z,1519689944.949 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:05:44.949Z,1519689944.949 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2018-02-27T00:05:45.298Z,1519689945.298 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:05:45.299Z,1519689945.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:05:45.299Z,1519689945.299 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:05:45.299Z,1519689945.299 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:05:45.300Z,1519689945.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:05:45.300Z,1519689945.300 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:06:52.885Z,1519690012.885 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-27T00:08:45.943Z,1519690125.943 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:08:45.943Z,1519690125.943 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 5
2018-02-27T00:08:45.943Z,1519690125.943 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:08:45.945Z,1519690125.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:08:45.945Z,1519690125.945 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2018-02-27T00:08:45.945Z,1519690125.945 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:08:45.979Z,1519690125.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:08:45.979Z,1519690125.979 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:08:46.100Z,1519690126.100 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:08:46.101Z,1519690126.101 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 5
2018-02-27T00:08:46.101Z,1519690126.101 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:08:46.101Z,1519690126.101 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2018-02-27T00:08:46.448Z,1519690126.448 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:08:46.449Z,1519690126.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:08:46.449Z,1519690126.449 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:08:46.449Z,1519690126.449 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:08:46.450Z,1519690126.450 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:08:46.450Z,1519690126.450 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:10:42.038Z,1519690242.038 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-27T00:10:42.038Z,1519690242.038 [Default:CheckIn:C.Wait] Stopped
2018-02-27T00:10:42.038Z,1519690242.038 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-27T00:10:42.038Z,1519690242.038 [Default:CheckIn:D] Running Loop=1
2018-02-27T00:10:42.433Z,1519690242.433 [Default:CheckIn:D] Stopped
2018-02-27T00:10:42.433Z,1519690242.433 [Default:CheckIn:E] Running Loop=1
2018-02-27T00:10:42.842Z,1519690242.842 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 391.276237 min 
2018-02-27T00:10:42.842Z,1519690242.842 [Default:CheckIn:E] Stopped
2018-02-27T00:10:42.843Z,1519690242.843 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-27T00:10:42.843Z,1519690242.843 [Default:CheckIn] Stopped
2018-02-27T00:10:42.843Z,1519690242.843 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-27T00:10:42.843Z,1519690242.843 [Default:CheckIn](INFO): Running loop #39
2018-02-27T00:10:42.843Z,1519690242.843 [Default:CheckIn] Running Loop=39
2018-02-27T00:10:42.843Z,1519690242.843 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-27T00:10:42.843Z,1519690242.843 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-27T00:11:46.709Z,1519690306.709 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:11:46.709Z,1519690306.709 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 6
2018-02-27T00:11:46.709Z,1519690306.709 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:11:46.711Z,1519690306.711 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:11:46.711Z,1519690306.711 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2018-02-27T00:11:46.711Z,1519690306.711 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:11:46.723Z,1519690306.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:11:46.723Z,1519690306.723 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:11:46.862Z,1519690306.862 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:11:46.862Z,1519690306.862 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 6
2018-02-27T00:11:46.862Z,1519690306.862 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:11:46.863Z,1519690306.863 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2018-02-27T00:11:47.194Z,1519690307.194 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:11:47.194Z,1519690307.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:11:47.194Z,1519690307.194 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:11:47.195Z,1519690307.195 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:11:47.195Z,1519690307.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:11:47.195Z,1519690307.195 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:13:25.130Z,1519690405.130 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-27T00:13:25.130Z,1519690405.130 [NAL9602] Data Fault, FailCount= 1
2018-02-27T00:13:25.130Z,1519690405.130 [NAL9602](ERROR): Data Fault
2018-02-27T00:13:25.202Z,1519690405.202 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-27T00:13:25.529Z,1519690405.529 [NAL9602](INFO): Powering down
2018-02-27T00:13:26.391Z,1519690406.391 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-27T00:13:26.391Z,1519690406.391 [NAL9602] No Fault, FailCount= 1
2018-02-27T00:13:55.886Z,1519690435.886 [NAL9602](INFO): Powering up NAL9602
2018-02-27T00:14:07.086Z,1519690447.086 [NAL9602](INFO): NAL9602 initialized
2018-02-27T00:14:47.829Z,1519690487.829 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:14:47.830Z,1519690487.830 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 7
2018-02-27T00:14:47.830Z,1519690487.830 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:14:47.831Z,1519690487.831 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:14:47.831Z,1519690487.831 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2018-02-27T00:14:47.831Z,1519690487.831 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:14:47.843Z,1519690487.843 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:14:47.844Z,1519690487.844 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:14:48.006Z,1519690488.006 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:14:48.006Z,1519690488.006 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 7
2018-02-27T00:14:48.007Z,1519690488.007 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:14:48.007Z,1519690488.007 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2018-02-27T00:14:48.327Z,1519690488.327 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:14:48.328Z,1519690488.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:14:48.328Z,1519690488.328 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:14:48.329Z,1519690488.329 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:14:48.329Z,1519690488.329 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:14:48.329Z,1519690488.329 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:15:43.111Z,1519690543.111 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-27T00:10:42.8Z
2018-02-27T00:15:43.111Z,1519690543.111 [Default:CheckIn:Read_GPS] Stopped
2018-02-27T00:15:43.111Z,1519690543.111 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-27T00:15:47.441Z,1519690547.441 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0156.lzma
2018-02-27T00:15:48.237Z,1519690548.237 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0156.lzma.bak
2018-02-27T00:15:48.237Z,1519690548.237 [DataOverHttps](INFO): SBD MOMSN=7869275
2018-02-27T00:15:56.995Z,1519690556.995 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0157.lzma
2018-02-27T00:15:57.765Z,1519690557.765 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0157.lzma.bak
2018-02-27T00:15:57.765Z,1519690557.765 [DataOverHttps](INFO): SBD MOMSN=7869277
2018-02-27T00:15:58.240Z,1519690558.240 [Default:CheckIn:Read_Iridium] Stopped
2018-02-27T00:15:58.240Z,1519690558.240 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-27T00:15:58.240Z,1519690558.240 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-27T00:16:53.001Z,1519690613.001 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-27T00:17:48.550Z,1519690668.550 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:17:48.550Z,1519690668.550 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 8
2018-02-27T00:17:48.550Z,1519690668.550 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:17:48.551Z,1519690668.551 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:17:48.552Z,1519690668.552 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2018-02-27T00:17:48.552Z,1519690668.552 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:17:48.563Z,1519690668.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:17:48.563Z,1519690668.563 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:17:48.971Z,1519690668.971 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:17:48.971Z,1519690668.971 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 8
2018-02-27T00:17:48.976Z,1519690668.976 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:17:48.976Z,1519690668.976 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2018-02-27T00:17:49.360Z,1519690669.360 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:17:49.360Z,1519690669.360 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:17:49.361Z,1519690669.361 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:17:49.361Z,1519690669.361 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:17:49.361Z,1519690669.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:17:49.362Z,1519690669.362 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:20:49.658Z,1519690849.658 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:20:49.658Z,1519690849.658 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 9
2018-02-27T00:20:49.658Z,1519690849.658 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:20:49.659Z,1519690849.659 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:20:49.660Z,1519690849.660 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2018-02-27T00:20:49.660Z,1519690849.660 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:20:49.696Z,1519690849.696 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:20:49.696Z,1519690849.696 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:20:50.064Z,1519690850.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:20:50.064Z,1519690850.064 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 9
2018-02-27T00:20:50.065Z,1519690850.065 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:20:50.065Z,1519690850.065 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2018-02-27T00:20:50.434Z,1519690850.434 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:20:50.434Z,1519690850.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:20:50.434Z,1519690850.434 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:20:50.435Z,1519690850.435 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:20:50.435Z,1519690850.435 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:20:50.435Z,1519690850.435 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:20:58.854Z,1519690858.854 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-27T00:20:58.855Z,1519690858.855 [Default:CheckIn:C.Wait] Stopped
2018-02-27T00:20:58.855Z,1519690858.855 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-27T00:20:58.855Z,1519690858.855 [Default:CheckIn:D] Running Loop=1
2018-02-27T00:20:59.248Z,1519690859.248 [Default:CheckIn:D] Stopped
2018-02-27T00:20:59.248Z,1519690859.248 [Default:CheckIn:E] Running Loop=1
2018-02-27T00:20:59.649Z,1519690859.649 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 401.556510 min 
2018-02-27T00:20:59.649Z,1519690859.649 [Default:CheckIn:E] Stopped
2018-02-27T00:20:59.649Z,1519690859.649 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-27T00:20:59.649Z,1519690859.649 [Default:CheckIn] Stopped
2018-02-27T00:20:59.649Z,1519690859.649 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-27T00:20:59.650Z,1519690859.650 [Default:CheckIn](INFO): Running loop #40
2018-02-27T00:20:59.650Z,1519690859.650 [Default:CheckIn] Running Loop=40
2018-02-27T00:20:59.650Z,1519690859.650 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-27T00:20:59.650Z,1519690859.650 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-27T00:23:50.826Z,1519691030.826 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:23:50.826Z,1519691030.826 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 10
2018-02-27T00:23:50.826Z,1519691030.826 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:23:50.827Z,1519691030.827 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:23:50.828Z,1519691030.828 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2018-02-27T00:23:50.828Z,1519691030.828 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:23:50.848Z,1519691030.848 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:23:50.852Z,1519691030.852 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:23:51.230Z,1519691031.230 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:23:51.230Z,1519691031.230 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 10
2018-02-27T00:23:51.231Z,1519691031.231 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:23:51.231Z,1519691031.231 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2018-02-27T00:23:51.616Z,1519691031.616 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:23:51.616Z,1519691031.616 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:23:51.617Z,1519691031.617 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:23:51.617Z,1519691031.617 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:23:51.617Z,1519691031.617 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:23:51.618Z,1519691031.618 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:24:08.762Z,1519691048.762 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-27T00:24:08.762Z,1519691048.762 [NAL9602] Data Fault, FailCount= 2
2018-02-27T00:24:08.762Z,1519691048.762 [NAL9602](ERROR): Data Fault
2018-02-27T00:24:08.840Z,1519691048.840 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-27T00:24:09.154Z,1519691049.154 [NAL9602](INFO): Powering down
2018-02-27T00:24:10.009Z,1519691050.009 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-27T00:24:10.009Z,1519691050.009 [NAL9602] No Fault, FailCount= 2
2018-02-27T00:24:39.158Z,1519691079.158 [NAL9602](INFO): Powering up NAL9602
2018-02-27T00:24:50.354Z,1519691090.354 [NAL9602](INFO): NAL9602 initialized
2018-02-27T00:25:59.829Z,1519691159.829 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-27T00:20:59.6Z
2018-02-27T00:25:59.829Z,1519691159.829 [Default:CheckIn:Read_GPS] Stopped
2018-02-27T00:25:59.829Z,1519691159.829 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-27T00:26:04.137Z,1519691164.137 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0160.lzma
2018-02-27T00:26:04.937Z,1519691164.937 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Courier0160.lzma.bak
2018-02-27T00:26:04.937Z,1519691164.937 [DataOverHttps](INFO): SBD MOMSN=7869281
2018-02-27T00:26:13.705Z,1519691173.705 [DataOverHttps](INFO): Sending 141 bytes from file Logs/20180226T173634/Express0161.lzma
2018-02-27T00:26:14.501Z,1519691174.501 [DataOverHttps](INFO): Moved sent file to Logs/20180226T173634/Express0161.lzma.bak
2018-02-27T00:26:14.501Z,1519691174.501 [DataOverHttps](INFO): SBD MOMSN=7869283
2018-02-27T00:26:14.992Z,1519691174.992 [Default:CheckIn:Read_Iridium] Stopped
2018-02-27T00:26:14.992Z,1519691174.992 [Default:CheckIn:C.Wait] Running Loop=1
2018-02-27T00:26:14.992Z,1519691174.992 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2018-02-27T00:26:51.716Z,1519691211.716 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:26:51.716Z,1519691211.716 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 11
2018-02-27T00:26:51.716Z,1519691211.716 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:26:51.718Z,1519691211.718 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:26:51.718Z,1519691211.718 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2018-02-27T00:26:51.718Z,1519691211.718 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:26:51.730Z,1519691211.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:26:51.730Z,1519691211.730 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:26:52.136Z,1519691212.136 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:26:52.136Z,1519691212.136 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 11
2018-02-27T00:26:52.136Z,1519691212.136 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:26:52.136Z,1519691212.136 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2018-02-27T00:26:52.527Z,1519691212.527 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:26:52.528Z,1519691212.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:26:52.528Z,1519691212.528 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:26:52.529Z,1519691212.529 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:26:52.529Z,1519691212.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:26:52.529Z,1519691212.529 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:26:53.340Z,1519691213.340 [CBIT](DEBUG): EFC running - data check-sum false
2018-02-27T00:29:52.862Z,1519691392.862 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:29:52.862Z,1519691392.862 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 12
2018-02-27T00:29:52.862Z,1519691392.862 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:29:52.864Z,1519691392.864 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:29:52.864Z,1519691392.864 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2018-02-27T00:29:52.864Z,1519691392.864 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:29:52.876Z,1519691392.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:29:52.876Z,1519691392.876 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:29:53.269Z,1519691393.269 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:29:53.269Z,1519691393.269 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 12
2018-02-27T00:29:53.269Z,1519691393.269 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:29:53.270Z,1519691393.270 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2018-02-27T00:29:53.670Z,1519691393.670 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:29:53.670Z,1519691393.670 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:29:53.670Z,1519691393.670 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:29:53.671Z,1519691393.671 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:29:53.671Z,1519691393.671 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:29:53.671Z,1519691393.671 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:31:15.639Z,1519691475.639 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2018-02-27T00:31:15.639Z,1519691475.639 [Default:CheckIn:C.Wait] Stopped
2018-02-27T00:31:15.639Z,1519691475.639 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2018-02-27T00:31:15.639Z,1519691475.639 [Default:CheckIn:D] Running Loop=1
2018-02-27T00:31:16.060Z,1519691476.060 [Default:CheckIn:D] Stopped
2018-02-27T00:31:16.060Z,1519691476.060 [Default:CheckIn:E] Running Loop=1
2018-02-27T00:31:16.450Z,1519691476.450 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 411.836686 min 
2018-02-27T00:31:16.450Z,1519691476.450 [Default:CheckIn:E] Stopped
2018-02-27T00:31:16.450Z,1519691476.450 [Default:CheckIn](INFO): Completed Default:CheckIn
2018-02-27T00:31:16.450Z,1519691476.450 [Default:CheckIn] Stopped
2018-02-27T00:31:16.450Z,1519691476.450 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2018-02-27T00:31:16.451Z,1519691476.451 [Default:CheckIn](INFO): Running loop #41
2018-02-27T00:31:16.451Z,1519691476.451 [Default:CheckIn] Running Loop=41
2018-02-27T00:31:16.451Z,1519691476.451 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2018-02-27T00:31:16.451Z,1519691476.451 [Default:CheckIn:Read_GPS] Running Loop=1
2018-02-27T00:32:47.165Z,1519691567.165 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-02-27T00:32:54.006Z,1519691574.006 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:32:54.007Z,1519691574.007 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 13
2018-02-27T00:32:54.007Z,1519691574.007 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:32:54.008Z,1519691574.008 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:32:54.009Z,1519691574.009 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2018-02-27T00:32:54.009Z,1519691574.009 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:32:54.044Z,1519691574.044 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:32:54.045Z,1519691574.045 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:32:54.445Z,1519691574.445 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:32:54.445Z,1519691574.445 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 13
2018-02-27T00:32:54.446Z,1519691574.446 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:32:54.446Z,1519691574.446 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2018-02-27T00:32:54.803Z,1519691574.803 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:32:54.804Z,1519691574.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:32:54.804Z,1519691574.804 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:32:54.805Z,1519691574.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:32:54.805Z,1519691574.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:32:54.805Z,1519691574.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:33:47.964Z,1519691627.964 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-02-27T00:34:21.565Z,1519691661.565 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.400742
2018-02-27T00:34:51.970Z,1519691691.970 [NAL9602](FAULT): GPS failed to acquire within timeout.
2018-02-27T00:34:51.970Z,1519691691.970 [NAL9602] Data Fault, FailCount= 3
2018-02-27T00:34:51.970Z,1519691691.970 [NAL9602](ERROR): Data Fault
2018-02-27T00:34:52.053Z,1519691692.053 [CBIT](ERROR): Data Fault in component: NAL9602
2018-02-27T00:34:52.365Z,1519691692.365 [NAL9602](INFO): Powering down
2018-02-27T00:34:53.221Z,1519691693.221 [CBIT](INFO): Clearing failed state for component NAL9602
2018-02-27T00:34:53.221Z,1519691693.221 [NAL9602] No Fault, FailCount= 3
2018-02-27T00:35:22.370Z,1519691722.370 [NAL9602](INFO): Powering up NAL9602
2018-02-27T00:35:33.570Z,1519691733.570 [NAL9602](INFO): NAL9602 initialized
2018-02-27T00:35:47.964Z,1519691747.964 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2018-02-27T00:35:54.833Z,1519691754.833 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:35:54.833Z,1519691754.833 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 14
2018-02-27T00:35:54.833Z,1519691754.833 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2018-02-27T00:35:54.834Z,1519691754.834 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2018-02-27T00:35:54.834Z,1519691754.834 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2018-02-27T00:35:54.834Z,1519691754.834 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2018-02-27T00:35:54.859Z,1519691754.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2018-02-27T00:35:54.859Z,1519691754.859 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2018-02-27T00:35:55.234Z,1519691755.234 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2018-02-27T00:35:55.234Z,1519691755.234 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 14
2018-02-27T00:35:55.234Z,1519691755.234 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2018-02-27T00:35:55.234Z,1519691755.234 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2018-02-27T00:35:55.620Z,1519691755.620 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2018-02-27T00:35:55.620Z,1519691755.620 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:35:55.621Z,1519691755.621 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:35:55.621Z,1519691755.621 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2018-02-27T00:35:55.621Z,1519691755.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2018-02-27T00:35:55.622Z,1519691755.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2018-02-27T00:36:16.821Z,1519691776.821 [Default:CheckIn:Read_GPS](INFO): Timed out from 2018-02-27T00:31:16.5Z
2018-02-27T00:36:16.821Z,1519691776.821 [Default:CheckIn:Read_GPS] Stopped
2018-02-27T00:36:16.821Z,1519691776.821 [Default:CheckIn:Read_Iridium] Running Loop=1
2018-02-27T00:36:22.893Z,1519691782.893 [DataOverHttps](IMPORTANT): SBD MTMSN=20180227T003622
2018-02-27T00:36:22.896Z,1519691782.896 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002722
2018-02-27T00:36:26.893Z,1519691786.893 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20180226T173634/Courier0164.lzma
2018-02-27T00:36:26.896Z,1519691786.896 [DataOverHttps](INFO): Received command:restart logs