2017-10-30T21:02:56.273Z,1509397376.273 [Supervisor](DEBUG): Initializing supervisor.
2017-10-30T21:02:56.276Z,1509397376.276 [SyncHandler](DEBUG): Created PCaller Thread at 4051A4E0
2017-10-30T21:02:56.276Z,1509397376.276 [SyncHandler](INFO): Protected caller Thread ID is 914
2017-10-30T21:02:56.277Z,1509397376.277 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-10-30T21:02:56.278Z,1509397376.278 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4054A4E0
2017-10-30T21:02:56.278Z,1509397376.278 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 915
2017-10-30T21:02:56.281Z,1509397376.281 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-10-30T21:02:56.292Z,1509397376.292 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-10-30T21:02:56.293Z,1509397376.293 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4057A4E0
2017-10-30T21:02:56.294Z,1509397376.294 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 916
2017-10-30T21:02:56.295Z,1509397376.295 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-10-30T21:02:56.296Z,1509397376.296 [logger ThreadHandler](DEBUG): Created PCaller Thread at 405AA4E0
2017-10-30T21:02:56.296Z,1509397376.296 [logger ThreadHandler](INFO): Protected caller Thread ID is 917
2017-10-30T21:02:56.298Z,1509397376.298 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-10-30T21:02:56.298Z,1509397376.298 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-10-30T21:02:56.300Z,1509397376.300 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-10-30T21:02:56.481Z,1509397376.481 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-10-30T21:02:56.481Z,1509397376.481 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-10-30T21:02:56.612Z,1509397376.612 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-10-30T21:02:56.612Z,1509397376.612 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-10-30T21:02:56.931Z,1509397376.931 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-10-30T21:02:56.932Z,1509397376.932 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-10-30T21:02:57.082Z,1509397377.082 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-10-30T21:02:57.083Z,1509397377.083 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-10-30T21:02:57.248Z,1509397377.248 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-10-30T21:02:57.442Z,1509397377.442 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-10-30T21:02:57.443Z,1509397377.443 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-10-30T21:02:57.544Z,1509397377.544 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-10-30T21:02:57.545Z,1509397377.545 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-10-30T21:02:57.823Z,1509397377.823 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-10-30T21:02:57.824Z,1509397377.824 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-10-30T21:02:58.167Z,1509397378.167 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-10-30T21:02:58.168Z,1509397378.168 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-10-30T21:02:58.459Z,1509397378.459 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-10-30T21:02:58.460Z,1509397378.460 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-10-30T21:02:58.947Z,1509397378.947 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-10-30T21:02:58.948Z,1509397378.948 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-10-30T21:02:59.137Z,1509397379.137 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-10-30T21:02:59.138Z,1509397379.138 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-10-30T21:02:59.238Z,1509397379.238 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-10-30T21:02:59.239Z,1509397379.239 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-10-30T21:02:59.689Z,1509397379.689 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-10-30T21:02:59.690Z,1509397379.690 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-10-30T21:02:59.798Z,1509397379.798 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-10-30T21:02:59.800Z,1509397379.800 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2017-10-30T21:02:59.801Z,1509397379.801 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2017-10-30T21:03:00.035Z,1509397380.035 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-10-30T21:03:00.035Z,1509397380.035 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2017-10-30T21:03:00.138Z,1509397380.138 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2017-10-30T21:03:00.231Z,1509397380.231 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2017-10-30T21:03:00.335Z,1509397380.335 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2017-10-30T21:03:00.425Z,1509397380.425 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2017-10-30T21:03:00.552Z,1509397380.552 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2017-10-30T21:03:00.704Z,1509397380.704 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2017-10-30T21:03:00.801Z,1509397380.801 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2017-10-30T21:03:00.897Z,1509397380.897 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2017-10-30T21:03:00.983Z,1509397380.983 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2017-10-30T21:03:01.159Z,1509397381.159 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2017-10-30T21:03:01.240Z,1509397381.240 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2017-10-30T21:03:01.249Z,1509397381.249 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-10-30T21:03:01.377Z,1509397381.377 [SBIT](DEBUG): Construct Startup Built In Test.
2017-10-30T21:03:01.407Z,1509397381.407 [SBIT] Loaded
2017-10-30T21:03:01.407Z,1509397381.407 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-10-30T21:03:01.408Z,1509397381.408 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-10-30T21:03:01.436Z,1509397381.436 [IBIT] Loaded
2017-10-30T21:03:01.436Z,1509397381.436 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-10-30T21:03:01.440Z,1509397381.440 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-10-30T21:03:01.591Z,1509397381.591 [CBIT] Loaded
2017-10-30T21:03:01.591Z,1509397381.591 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-10-30T21:03:01.591Z,1509397381.591 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-10-30T21:03:01.592Z,1509397381.592 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-10-30T21:03:01.660Z,1509397381.660 [VerticalControl](DEBUG): Construct VerticalControl.
2017-10-30T21:03:01.759Z,1509397381.759 [VerticalControl] Loaded
2017-10-30T21:03:01.759Z,1509397381.759 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-10-30T21:03:01.760Z,1509397381.760 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-10-30T21:03:01.823Z,1509397381.823 [HorizontalControl] Loaded
2017-10-30T21:03:01.824Z,1509397381.824 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-10-30T21:03:01.824Z,1509397381.824 [SpeedControl](DEBUG): Construct SpeedControl.
2017-10-30T21:03:01.830Z,1509397381.830 [SpeedControl] Loaded
2017-10-30T21:03:01.830Z,1509397381.830 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-10-30T21:03:01.831Z,1509397381.831 [LoopControl](DEBUG): Construct LoopControl.
2017-10-30T21:03:01.832Z,1509397381.832 [LoopControl] Loaded
2017-10-30T21:03:01.832Z,1509397381.832 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-10-30T21:03:01.832Z,1509397381.832 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-10-30T21:03:01.833Z,1509397381.833 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-10-30T21:03:01.857Z,1509397381.857 [DepthRateCalculator] Loaded
2017-10-30T21:03:01.858Z,1509397381.858 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-10-30T21:03:01.863Z,1509397381.863 [PitchRateCalculator] Loaded
2017-10-30T21:03:01.863Z,1509397381.863 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-10-30T21:03:01.879Z,1509397381.879 [SpeedCalculator] Loaded
2017-10-30T21:03:01.880Z,1509397381.880 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-10-30T21:03:01.901Z,1509397381.901 [TempGradientCalculator] Loaded
2017-10-30T21:03:01.901Z,1509397381.901 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-10-30T21:03:01.917Z,1509397381.917 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-10-30T21:03:01.917Z,1509397381.917 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-10-30T21:03:01.922Z,1509397381.922 [YawRateCalculator] Loaded
2017-10-30T21:03:01.923Z,1509397381.923 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-10-30T21:03:01.923Z,1509397381.923 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-10-30T21:03:01.924Z,1509397381.924 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-10-30T21:03:02.006Z,1509397382.006 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-10-30T21:03:02.006Z,1509397382.006 [StratificationFrontDetector](DEBUG): (re)initializing
2017-10-30T21:03:02.007Z,1509397382.007 [StratificationFrontDetector] Loaded
2017-10-30T21:03:02.007Z,1509397382.007 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-10-30T21:03:02.008Z,1509397382.008 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-10-30T21:03:02.008Z,1509397382.008 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-10-30T21:03:02.245Z,1509397382.245 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-10-30T21:03:02.245Z,1509397382.245 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-10-30T21:03:02.337Z,1509397382.337 [DeadReckonUsingSpeedCalculator] Loaded
2017-10-30T21:03:02.338Z,1509397382.338 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-10-30T21:03:02.394Z,1509397382.394 [DeadReckonWithRespectToSeafloor] Loaded
2017-10-30T21:03:02.394Z,1509397382.394 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-10-30T21:03:02.411Z,1509397382.411 [NavChart] Loaded
2017-10-30T21:03:02.411Z,1509397382.411 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-10-30T21:03:02.415Z,1509397382.415 [UniversalFixResidualReporter] Loaded
2017-10-30T21:03:02.415Z,1509397382.415 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-10-30T21:03:02.416Z,1509397382.416 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-10-30T21:03:02.416Z,1509397382.416 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-10-30T21:03:02.430Z,1509397382.430 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-10-30T21:03:02.431Z,1509397382.431 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-10-30T21:03:02.576Z,1509397382.576 [Aanderaa_O2] Loaded
2017-10-30T21:03:02.576Z,1509397382.576 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-10-30T21:03:02.588Z,1509397382.588 [CANONSampler] Loaded
2017-10-30T21:03:02.589Z,1509397382.589 [ComponentRegistry](DEBUG): SyncComponent "CANONSampler" handled in the control thread.
2017-10-30T21:03:02.668Z,1509397382.668 [CTD_NeilBrown] Loaded
2017-10-30T21:03:02.669Z,1509397382.669 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2017-10-30T21:03:02.670Z,1509397382.670 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 4078C4E0
2017-10-30T21:03:02.670Z,1509397382.670 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 999
2017-10-30T21:03:02.704Z,1509397382.704 [CTD_Seabird] Loaded
2017-10-30T21:03:02.704Z,1509397382.704 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-10-30T21:03:02.706Z,1509397382.706 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 407BC4E0
2017-10-30T21:03:02.706Z,1509397382.706 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 1000
2017-10-30T21:03:02.721Z,1509397382.721 [PAR_Licor] Loaded
2017-10-30T21:03:02.721Z,1509397382.721 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-10-30T21:03:02.770Z,1509397382.770 [WetLabsBB2FL] Loaded
2017-10-30T21:03:02.771Z,1509397382.771 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-10-30T21:03:02.772Z,1509397382.772 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407EC4E0
2017-10-30T21:03:02.772Z,1509397382.772 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 1001
2017-10-30T21:03:02.773Z,1509397382.773 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-10-30T21:03:02.773Z,1509397382.773 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-10-30T21:03:03.034Z,1509397383.034 [DataOverHttps] Loaded
2017-10-30T21:03:03.034Z,1509397383.034 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-10-30T21:03:03.048Z,1509397383.048 [Depth_Keller] Loaded
2017-10-30T21:03:03.048Z,1509397383.048 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-10-30T21:03:03.053Z,1509397383.053 [DropWeight] Loaded
2017-10-30T21:03:03.053Z,1509397383.053 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-10-30T21:03:03.161Z,1509397383.161 [NAL9602] Loaded
2017-10-30T21:03:03.162Z,1509397383.162 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-10-30T21:03:03.171Z,1509397383.171 [Onboard] Loaded
2017-10-30T21:03:03.171Z,1509397383.171 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-10-30T21:03:03.178Z,1509397383.178 [Radio_Surface] Loaded
2017-10-30T21:03:03.179Z,1509397383.179 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-10-30T21:03:03.180Z,1509397383.180 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 40A304E0
2017-10-30T21:03:03.180Z,1509397383.180 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 1002
2017-10-30T21:03:03.228Z,1509397383.228 [PNI_TCM] Loaded
2017-10-30T21:03:03.229Z,1509397383.229 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-10-30T21:03:05.080Z,1509397385.080 [BPC1] Loaded
2017-10-30T21:03:05.080Z,1509397385.080 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-10-30T21:03:05.080Z,1509397385.080 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-10-30T21:03:05.081Z,1509397385.081 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-10-30T21:03:05.178Z,1509397385.178 [BuoyancyServo] Loaded
2017-10-30T21:03:05.178Z,1509397385.178 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-10-30T21:03:05.190Z,1509397385.190 [ElevatorServo] Loaded
2017-10-30T21:03:05.191Z,1509397385.191 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-10-30T21:03:05.202Z,1509397385.202 [MassServo] Loaded
2017-10-30T21:03:05.202Z,1509397385.202 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-10-30T21:03:05.214Z,1509397385.214 [RudderServo] Loaded
2017-10-30T21:03:05.214Z,1509397385.214 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-10-30T21:03:05.226Z,1509397385.226 [ThrusterServo] Loaded
2017-10-30T21:03:05.226Z,1509397385.226 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-10-30T21:03:05.227Z,1509397385.227 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-10-30T21:03:05.227Z,1509397385.227 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-10-30T21:03:05.327Z,1509397385.327 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-10-30T21:03:05.328Z,1509397385.328 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-10-30T21:03:05.354Z,1509397385.354 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-10-30T21:03:05.357Z,1509397385.357 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-10-30T21:03:05.358Z,1509397385.358 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-10-30T21:03:05.365Z,1509397385.365 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-10-30T21:03:05.366Z,1509397385.366 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40ADE4E0
2017-10-30T21:03:05.367Z,1509397385.367 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 1003
2017-10-30T21:03:05.372Z,1509397385.372 [Supervisor](INFO): Main Thread ID is 764
2017-10-30T21:03:05.372Z,1509397385.372 [Supervisor](DEBUG): Running supervisor.
2017-10-30T21:03:05.372Z,1509397385.372 [CommandLine ThreadHandler](INFO): Handler Thread ID is 1004
2017-10-30T21:03:05.375Z,1509397385.375 [controlThread ThreadHandler](INFO): Handler Thread ID is 1005
2017-10-30T21:03:05.376Z,1509397385.376 [controlThread](DEBUG): Initializing ControlThread
2017-10-30T21:03:05.377Z,1509397385.377 [SBIT](INFO): Initialize SBIT Component.
2017-10-30T21:03:05.377Z,1509397385.377 [SBIT](IMPORTANT): git: 2017-10-26
2017-10-30T21:03:05.377Z,1509397385.377 [SBIT](INFO): git hash: 28bc8905b20845041bb4f5c496aa82bb18273281
2017-10-30T21:03:05.379Z,1509397385.379 [SBIT](INFO): Kernel Reporting Different Release From Configuration.
Kernel Expected: 2.6.27.8
Kernel Reported: 2.6.27.8-00011-g2bc81df-dirty
2017-10-30T21:03:05.379Z,1509397385.379 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #646 PREEMPT Thu Feb 11 17:01:12 PST 2016
2017-10-30T21:03:05.380Z,1509397385.380 [SBIT](INFO): Beginning SBIT in 23.000000 seconds.
2017-10-30T21:03:05.381Z,1509397385.381 [IBIT](INFO): Initialize IBIT Component.
2017-10-30T21:03:05.382Z,1509397385.382 [CBIT](DEBUG): Initialize CBIT Component.
2017-10-30T21:03:05.382Z,1509397385.382 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-10-30T21:03:05.383Z,1509397385.383 [logger ThreadHandler](INFO): Handler Thread ID is 1006
2017-10-30T21:03:05.410Z,1509397385.410 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 1007
2017-10-30T21:03:05.411Z,1509397385.411 [CTD_NeilBrown](INFO): Powering down
2017-10-30T21:03:05.445Z,1509397385.445 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 1008
2017-10-30T21:03:05.446Z,1509397385.446 [CTD_Seabird](INFO): Initializing
2017-10-30T21:03:05.482Z,1509397385.482 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-10-30T21:03:05.484Z,1509397385.484 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-10-30T21:03:05.485Z,1509397385.485 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-10-30T21:03:05.486Z,1509397385.486 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-10-30T21:03:05.486Z,1509397385.486 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-10-30T21:03:05.486Z,1509397385.486 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-10-30T21:03:05.487Z,1509397385.487 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-10-30T21:03:05.487Z,1509397385.487 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-10-30T21:03:05.488Z,1509397385.488 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-10-30T21:03:05.489Z,1509397385.489 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-10-30T21:03:05.489Z,1509397385.489 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-10-30T21:03:05.490Z,1509397385.490 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:03:05.491Z,1509397385.491 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:03:05.491Z,1509397385.491 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:03:05.492Z,1509397385.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:03:05.492Z,1509397385.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:03:05.493Z,1509397385.493 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-10-30T21:03:05.493Z,1509397385.493 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-10-30T21:03:05.504Z,1509397385.504 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-10-30T21:03:05.510Z,1509397385.510 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 1010
2017-10-30T21:03:05.512Z,1509397385.512 [WetLabsBB2FL](INFO): Powering down
2017-10-30T21:03:05.550Z,1509397385.550 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 1011
2017-10-30T21:03:05.556Z,1509397385.556 [Radio_Surface](INFO): Powering up
2017-10-30T21:03:05.559Z,1509397385.559 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-10-30T21:03:05.570Z,1509397385.570 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 1012
2017-10-30T21:03:05.574Z,1509397385.574 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-10-30T21:03:05.574Z,1509397385.574 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-10-30T21:03:05.574Z,1509397385.574 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-10-30T21:03:05.575Z,1509397385.575 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-10-30T21:03:05.575Z,1509397385.575 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-10-30T21:03:05.575Z,1509397385.575 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-10-30T21:03:05.575Z,1509397385.575 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-10-30T21:03:05.575Z,1509397385.575 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-10-30T21:03:05.576Z,1509397385.576 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-10-30T21:03:05.576Z,1509397385.576 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-10-30T21:03:05.576Z,1509397385.576 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-10-30T21:03:05.576Z,1509397385.576 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-10-30T21:03:05.576Z,1509397385.576 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-10-30T21:03:05.577Z,1509397385.577 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-10-30T21:03:05.577Z,1509397385.577 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-10-30T21:03:05.577Z,1509397385.577 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-10-30T21:03:05.638Z,1509397385.638 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-10-30T21:03:05.639Z,1509397385.639 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-10-30T21:03:05.717Z,1509397385.717 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-10-30T21:03:05.718Z,1509397385.718 [Default:A.Wait](DEBUG): Construct Wait.
2017-10-30T21:03:05.720Z,1509397385.720 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-10-30T21:03:05.764Z,1509397385.764 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-10-30T21:03:05.764Z,1509397385.764 [CTD_Seabird](INFO): Powering down
2017-10-30T21:03:05.814Z,1509397385.814 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-10-30T21:03:05.817Z,1509397385.817 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-10-30T21:03:05.839Z,1509397385.839 [Default:E.Execute](DEBUG): Construct Execute.
2017-10-30T21:03:05.842Z,1509397385.842 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-10-30T21:03:05.863Z,1509397385.863 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,CANONSampler,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-10-30T21:03:05.918Z,1509397385.918 [CANONSampler](INFO): Powering down
2017-10-30T21:03:06.125Z,1509397386.125 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-10-30T21:03:06.149Z,1509397386.149 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2017-10-30T21:03:06.326Z,1509397386.326 [DepthRateCalculator](ERROR): Depth measurement is not active
2017-10-30T21:03:06.415Z,1509397386.415 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:06.439Z,1509397386.439 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:06.544Z,1509397386.544 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-10-30T21:03:06.551Z,1509397386.551 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-10-30T21:03:06.574Z,1509397386.574 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-10-30T21:03:06.579Z,1509397386.579 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-10-30T21:03:06.585Z,1509397386.585 [MassServo](DEBUG): Initializing EZServoServo.
2017-10-30T21:03:06.592Z,1509397386.592 [MassServo](DEBUG): Initializing MassServo.
2017-10-30T21:03:06.598Z,1509397386.598 [RudderServo](DEBUG): Initializing EZServoServo.
2017-10-30T21:03:06.603Z,1509397386.603 [RudderServo](DEBUG): Initializing RudderServo.
2017-10-30T21:03:06.609Z,1509397386.609 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-10-30T21:03:06.616Z,1509397386.616 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-10-30T21:03:06.934Z,1509397386.934 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:06.935Z,1509397386.935 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:07.171Z,1509397387.171 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:07.172Z,1509397387.172 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:07.641Z,1509397387.641 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:07.642Z,1509397387.642 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:08.053Z,1509397388.053 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:08.054Z,1509397388.054 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:08.438Z,1509397388.438 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:08.446Z,1509397388.446 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:08.826Z,1509397388.826 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:08.843Z,1509397388.843 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:09.312Z,1509397389.312 [Aanderaa_O2](INFO): Powering down
2017-10-30T21:03:09.439Z,1509397389.439 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:09.448Z,1509397389.448 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-30T21:03:29.059Z,1509397409.059 [SBIT](IMPORTANT): Beginning Startup BIT
2017-10-30T21:03:29.071Z,1509397409.071 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:03:33.508Z,1509397413.508 [NAL9602](INFO): Powering up NAL9602
2017-10-30T21:03:40.420Z,1509397420.420 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 4.657929
CHAN A1 (24V): -0.005531
CHAN A2 (12V): 4.697929
CHAN A3 (5V): 0.000365
CHAN B0 (3.3V): 0.000104
CHAN B1 (3.15aV): 0.000934
CHAN B2 (3.15bV): 0.000254
CHAN B3 (GND): 0.000667
OPEN: -0.000676
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:03:44.937Z,1509397424.937 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:04:08.528Z,1509397448.528 [NAL9602](INFO): SBD MO Status=2, MOMSN=3290, MT Status=2, MTMSN=0
2017-10-30T21:04:08.529Z,1509397448.529 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T21:04:23.140Z,1509397463.140 [SBIT](IMPORTANT): SBIT PASSED
2017-10-30T21:04:23.532Z,1509397463.532 [MissionManager](IMPORTANT): Started mission Startup
2017-10-30T21:04:23.532Z,1509397463.532 [Startup] Running Loop=1
2017-10-30T21:04:23.532Z,1509397463.532 [Startup](DEBUG): Aggregate::initialize Startup
2017-10-30T21:04:23.532Z,1509397463.532 [Startup:A.GoToSurface] Running Loop=1
2017-10-30T21:04:23.533Z,1509397463.533 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-10-30T21:04:23.533Z,1509397463.533 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-10-30T21:04:23.534Z,1509397463.534 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-10-30T21:04:23.534Z,1509397463.534 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-10-30T21:04:23.534Z,1509397463.534 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-10-30T21:04:23.535Z,1509397463.535 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-10-30T21:04:23.540Z,1509397463.540 [Startup:StartupSatComms] Running Loop=1
2017-10-30T21:04:23.540Z,1509397463.540 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-10-30T21:04:23.557Z,1509397463.557 [Startup:StartupSatComms:A] Running Loop=1
2017-10-30T21:04:23.917Z,1509397463.917 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-10-30T21:04:35.086Z,1509397475.086 [NAL9602](INFO): SBD MO Status=2, MOMSN=3290, MT Status=2, MTMSN=0
2017-10-30T21:04:35.086Z,1509397475.086 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T21:05:10.749Z,1509397510.749 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:05:11.090Z,1509397511.090 [NAL9602](INFO): SBD MO Status=0, MOMSN=3290, MT Status=0, MTMSN=0
2017-10-30T21:05:11.090Z,1509397511.090 [NAL9602](INFO): No messages in MT queue
2017-10-30T21:05:21.630Z,1509397521.630 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.000274
CHAN A1 (24V): -0.004056
CHAN A2 (12V): -0.001889
CHAN A3 (5V): -0.000232
CHAN B0 (3.3V): -0.000322
CHAN B1 (3.15aV): -0.000042
CHAN B2 (3.15bV): -0.000387
CHAN B3 (GND): 0.000038
OPEN: -0.000262
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:05:23.582Z,1509397523.582 [Startup:StartupSatComms:A](INFO): Timed out from 2017-10-30T21:04:23.5Z
2017-10-30T21:05:23.582Z,1509397523.582 [Startup:StartupSatComms:A] Stopped
2017-10-30T21:05:23.582Z,1509397523.582 [Startup:StartupSatComms:B] Running Loop=1
2017-10-30T21:05:23.947Z,1509397523.947 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-10-30T21:05:39.992Z,1509397539.992 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T21:05:39.992Z,1509397539.992 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:05:39.992Z,1509397539.992 [BPC1](ERROR): Data Fault
2017-10-30T21:05:40.021Z,1509397540.021 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:05:41.209Z,1509397541.209 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:05:41.209Z,1509397541.209 [BPC1] No Fault, FailCount= 1
2017-10-30T21:06:07.620Z,1509397567.620 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:06:07.620Z,1509397567.620 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-10-30T21:06:07.620Z,1509397567.620 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-10-30T21:06:07.622Z,1509397567.622 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:06:07.622Z,1509397567.622 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-30T21:06:07.622Z,1509397567.622 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:06:07.634Z,1509397567.634 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-10-30T21:06:07.634Z,1509397567.634 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:06:07.776Z,1509397567.776 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-10-30T21:06:07.776Z,1509397567.776 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-10-30T21:06:07.777Z,1509397567.777 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:06:07.777Z,1509397567.777 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-30T21:06:08.120Z,1509397568.120 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-10-30T21:06:08.120Z,1509397568.120 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:06:08.121Z,1509397568.121 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:06:08.121Z,1509397568.121 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:06:08.122Z,1509397568.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:06:08.122Z,1509397568.122 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:06:12.190Z,1509397572.190 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003906
2017-10-30T21:06:16.365Z,1509397576.365 [DataOverHttps](INFO): Sending 44 bytes from file Logs/20171030T172617/Courier0012.lzma
2017-10-30T21:06:17.115Z,1509397577.115 [DataOverHttps](INFO): Moved sent file to Logs/20171030T172617/Courier0012.lzma.bak
2017-10-30T21:06:17.115Z,1509397577.115 [DataOverHttps](INFO): SBD MOMSN=5176960
2017-10-30T21:06:21.182Z,1509397581.182 [NAL9602](INFO): SBD MO Status=2, MOMSN=3291, MT Status=2, MTMSN=0
2017-10-30T21:06:21.183Z,1509397581.183 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T21:06:26.292Z,1509397586.292 [Startup:StartupSatComms:B](INFO): Timed out from 2017-10-30T21:05:23.6Z
2017-10-30T21:06:26.292Z,1509397586.292 [Startup:StartupSatComms:B] Stopped
2017-10-30T21:06:26.292Z,1509397586.292 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-10-30T21:06:26.292Z,1509397586.292 [Startup:StartupSatComms] Stopped
2017-10-30T21:06:26.292Z,1509397586.292 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-10-30T21:06:26.293Z,1509397586.293 [Startup](INFO): Completed Startup
2017-10-30T21:06:26.293Z,1509397586.293 [MissionManager](INFO): Startup is completed.
2017-10-30T21:06:26.293Z,1509397586.293 [MissionManager](INFO): Uninitializing Mission Startup
2017-10-30T21:06:26.294Z,1509397586.294 [Startup] Stopped
2017-10-30T21:06:26.294Z,1509397586.294 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-10-30T21:06:26.294Z,1509397586.294 [Startup:A.GoToSurface] Stopped
2017-10-30T21:06:26.294Z,1509397586.294 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-10-30T21:06:26.363Z,1509397586.363 [DataOverHttps](INFO): Sending 2176 bytes from file Logs/20171030T172617/Express0013.lzma
2017-10-30T21:06:26.441Z,1509397586.441 [MissionManager](IMPORTANT): Started mission Default
2017-10-30T21:06:26.441Z,1509397586.441 [Default] Running Loop=1
2017-10-30T21:06:26.442Z,1509397586.442 [Default](DEBUG): Aggregate::initialize Default
2017-10-30T21:06:26.442Z,1509397586.442 [Default:B.GoToSurface] Running Loop=1
2017-10-30T21:06:26.442Z,1509397586.442 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-10-30T21:06:26.442Z,1509397586.442 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-10-30T21:06:26.442Z,1509397586.442 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-10-30T21:06:26.443Z,1509397586.443 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-10-30T21:06:26.447Z,1509397586.447 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-10-30T21:06:26.448Z,1509397586.448 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-10-30T21:06:26.448Z,1509397586.448 [Default:A.Wait] Running Loop=1
2017-10-30T21:06:26.448Z,1509397586.448 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-10-30T21:06:27.134Z,1509397587.134 [DataOverHttps](INFO): Moved sent file to Logs/20171030T172617/Express0013.lzma.bak
2017-10-30T21:06:27.135Z,1509397587.135 [DataOverHttps](INFO): SBD MOMSN=5176962
2017-10-30T21:06:39.710Z,1509397599.710 [Default:A.Wait](INFO): Done Waiting.
2017-10-30T21:06:39.711Z,1509397599.711 [Default:A.Wait] Stopped
2017-10-30T21:06:39.711Z,1509397599.711 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T21:06:40.120Z,1509397600.120 [Default:CheckIn] Running Loop=1
2017-10-30T21:06:40.120Z,1509397600.120 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T21:06:40.120Z,1509397600.120 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T21:06:40.517Z,1509397600.517 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-10-30T21:06:47.267Z,1509397607.267 [NAL9602](INFO): GPS fix at 20171030T210645: (36.802753, -121.788054)
2017-10-30T21:06:47.357Z,1509397607.357 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T21:06:47.357Z,1509397607.357 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T21:06:47.787Z,1509397607.787 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-10-30T21:06:54.079Z,1509397614.079 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:06:54.140Z,1509397614.140 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20171030T210256/Courier0004.lzma
2017-10-30T21:06:54.894Z,1509397614.894 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0004.lzma.bak
2017-10-30T21:06:54.895Z,1509397614.895 [DataOverHttps](INFO): SBD MOMSN=5177063
2017-10-30T21:07:04.928Z,1509397624.928 [DataOverHttps](INFO): Sending 570 bytes from file Logs/20171030T210256/Express0001.lzma
2017-10-30T21:07:05.731Z,1509397625.731 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0001.lzma.bak
2017-10-30T21:07:05.732Z,1509397625.732 [DataOverHttps](INFO): SBD MOMSN=5177067
2017-10-30T21:07:15.183Z,1509397635.183 [DataOverHttps](INFO): Sending 211 bytes from file Logs/20171030T210256/Express0005.lzma
2017-10-30T21:07:15.298Z,1509397635.298 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.000243
CHAN A1 (24V): -0.003409
CHAN A2 (12V): -0.002179
CHAN A3 (5V): 0.000345
CHAN B0 (3.3V): -0.000284
CHAN B1 (3.15aV): -0.000293
CHAN B2 (3.15bV): -0.000591
CHAN B3 (GND): -0.000088
OPEN: -0.000477
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:07:15.988Z,1509397635.988 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0005.lzma.bak
2017-10-30T21:07:15.988Z,1509397635.988 [DataOverHttps](INFO): SBD MOMSN=5177078
2017-10-30T21:07:16.445Z,1509397636.445 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T21:07:16.445Z,1509397636.445 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T21:07:16.445Z,1509397636.445 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T21:07:24.484Z,1509397644.484 [NAL9602](INFO): Powering down
2017-10-30T21:08:25.937Z,1509397705.937 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-30T21:08:25.937Z,1509397705.937 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:08:25.937Z,1509397705.937 [BPC1](ERROR): Data Fault
2017-10-30T21:08:25.996Z,1509397705.996 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:08:27.161Z,1509397707.161 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:08:27.161Z,1509397707.161 [BPC1] No Fault, FailCount= 1
2017-10-30T21:08:45.556Z,1509397725.556 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:08:56.365Z,1509397736.365 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.000046
CHAN A1 (24V): -0.003317
CHAN A2 (12V): -0.002235
CHAN A3 (5V): 0.000595
CHAN B0 (3.3V): -0.000207
CHAN B1 (3.15aV): -0.000316
CHAN B2 (3.15bV): -0.000754
CHAN B3 (GND): -0.000068
OPEN: -0.000404
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:09:08.359Z,1509397748.359 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:09:08.359Z,1509397748.359 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-30T21:09:08.359Z,1509397748.359 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:09:08.393Z,1509397748.393 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:09:08.778Z,1509397748.778 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:09:08.778Z,1509397748.778 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-30T21:09:09.162Z,1509397749.162 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:09:09.162Z,1509397749.162 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:09:09.163Z,1509397749.163 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:10:26.573Z,1509397826.573 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:10:37.390Z,1509397837.390 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.000691
CHAN A1 (24V): -0.002730
CHAN A2 (12V): -0.002071
CHAN A3 (5V): -0.000065
CHAN B0 (3.3V): -0.000175
CHAN B1 (3.15aV): 0.000196
CHAN B2 (3.15bV): 0.000174
CHAN B3 (GND): -0.000765
OPEN: -0.000459
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:12:07.513Z,1509397927.513 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:12:09.491Z,1509397929.491 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:12:09.492Z,1509397929.492 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-30T21:12:09.492Z,1509397929.492 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:12:09.514Z,1509397929.514 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:12:09.950Z,1509397929.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:12:09.950Z,1509397929.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-30T21:12:10.285Z,1509397930.285 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:12:10.285Z,1509397930.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:12:10.285Z,1509397930.285 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:12:17.083Z,1509397937.083 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T21:12:17.083Z,1509397937.083 [Default:CheckIn:C.Wait] Stopped
2017-10-30T21:12:17.083Z,1509397937.083 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T21:12:17.083Z,1509397937.083 [Default:CheckIn:D] Running Loop=1
2017-10-30T21:12:17.485Z,1509397937.485 [Default:CheckIn:D] Stopped
2017-10-30T21:12:17.485Z,1509397937.485 [Default:CheckIn:E] Running Loop=1
2017-10-30T21:12:17.899Z,1509397937.899 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 5.850696 min 
2017-10-30T21:12:17.901Z,1509397937.901 [Default:CheckIn:E] Stopped
2017-10-30T21:12:17.901Z,1509397937.901 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T21:12:17.901Z,1509397937.901 [Default:CheckIn] Stopped
2017-10-30T21:12:17.901Z,1509397937.901 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T21:12:17.901Z,1509397937.901 [Default:CheckIn](INFO): Running loop #2
2017-10-30T21:12:17.901Z,1509397937.901 [Default:CheckIn] Running Loop=2
2017-10-30T21:12:17.901Z,1509397937.901 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T21:12:17.901Z,1509397937.901 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T21:12:21.197Z,1509397941.197 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003080
CHAN A1 (24V): -0.003662
CHAN A2 (12V): -0.002118
CHAN A3 (5V): 0.000527
CHAN B0 (3.3V): 0.000129
CHAN B1 (3.15aV): 0.000040
CHAN B2 (3.15bV): -0.000417
CHAN B3 (GND): -0.000897
OPEN: -0.000471
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:12:21.262Z,1509397941.262 [NAL9602](INFO): Powering up
2017-10-30T21:12:32.421Z,1509397952.421 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:13:05.715Z,1509397985.715 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T21:13:08.818Z,1509397988.818 [NAL9602](INFO): SBD MO Status=0, MOMSN=3291, MT Status=0, MTMSN=0
2017-10-30T21:13:08.818Z,1509397988.818 [NAL9602](INFO): No messages in MT queue
2017-10-30T21:13:32.298Z,1509398012.298 [PNI_TCM](ERROR): CRC does not match. Expected:0x61297 got:0x16938
2017-10-30T21:13:38.715Z,1509398018.715 [PNI_TCM](ERROR): CRC does not match. Expected:0x8889 got:0x49063
2017-10-30T21:13:41.905Z,1509398021.905 [PNI_TCM](ERROR): CRC does not match. Expected:0x45502 got:0x26838
2017-10-30T21:13:45.112Z,1509398025.112 [PNI_TCM](ERROR): CRC does not match. Expected:0x57559 got:0x28957
2017-10-30T21:13:51.504Z,1509398031.504 [PNI_TCM](ERROR): CRC does not match. Expected:0x33558 got:0x49177
2017-10-30T21:13:51.579Z,1509398031.579 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:14:02.352Z,1509398042.352 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134616
CHAN A1 (24V): -0.003398
CHAN A2 (12V): -0.001947
CHAN A3 (5V): 0.000076
CHAN B0 (3.3V): -0.000522
CHAN B1 (3.15aV): -0.000440
CHAN B2 (3.15bV): -0.000331
CHAN B3 (GND): -0.000480
OPEN: -0.000309
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:14:02.698Z,1509398042.698 [PNI_TCM](ERROR): CRC does not match. Expected:0x44686 got:0x16820
2017-10-30T21:14:05.906Z,1509398045.906 [PNI_TCM](ERROR): CRC does not match. Expected:0x56832 got:0x6335
2017-10-30T21:14:26.882Z,1509398066.882 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T21:14:26.882Z,1509398066.882 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:14:26.882Z,1509398066.882 [BPC1](ERROR): Data Fault
2017-10-30T21:14:26.942Z,1509398066.942 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:14:28.106Z,1509398068.106 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:14:28.106Z,1509398068.106 [BPC1] No Fault, FailCount= 1
2017-10-30T21:14:36.044Z,1509398076.044 [NAL9602](INFO): GPS fix at 20171030T211434: (36.802738, -121.787932)
2017-10-30T21:14:36.105Z,1509398076.105 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T21:14:36.105Z,1509398076.105 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T21:14:40.681Z,1509398080.681 [DataOverHttps](INFO): Sending 230 bytes from file Logs/20171030T210256/Courier0008.lzma
2017-10-30T21:14:41.460Z,1509398081.460 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0008.lzma.bak
2017-10-30T21:14:41.460Z,1509398081.460 [DataOverHttps](INFO): SBD MOMSN=5177081
2017-10-30T21:14:41.490Z,1509398081.490 [PNI_TCM](ERROR): CRC does not match. Expected:0x31622 got:0x6429
2017-10-30T21:14:50.738Z,1509398090.738 [DataOverHttps](INFO): Sending 535 bytes from file Logs/20171030T210256/Express0009.lzma
2017-10-30T21:14:51.513Z,1509398091.513 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0009.lzma.bak
2017-10-30T21:14:51.513Z,1509398091.513 [DataOverHttps](INFO): SBD MOMSN=5177084
2017-10-30T21:14:52.008Z,1509398092.008 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T21:14:52.008Z,1509398092.008 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T21:14:52.008Z,1509398092.008 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T21:15:10.325Z,1509398110.325 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:15:10.326Z,1509398110.326 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-30T21:15:10.326Z,1509398110.326 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:15:10.360Z,1509398110.360 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:15:10.699Z,1509398110.699 [NAL9602](INFO): Powering down
2017-10-30T21:15:10.779Z,1509398110.779 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:15:10.779Z,1509398110.779 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-30T21:15:11.136Z,1509398111.136 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:15:11.137Z,1509398111.137 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:15:11.137Z,1509398111.137 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:15:32.745Z,1509398132.745 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:15:43.588Z,1509398143.588 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003738
CHAN A1 (24V): -0.003321
CHAN A2 (12V): -0.001951
CHAN A3 (5V): 0.000282
CHAN B0 (3.3V): -0.000454
CHAN B1 (3.15aV): -0.000510
CHAN B2 (3.15bV): 0.000125
CHAN B3 (GND): -0.000363
OPEN: -0.000330
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:15:48.320Z,1509398148.320 [PNI_TCM](ERROR): CRC does not match. Expected:0x57177 got:0x46208
2017-10-30T21:17:13.926Z,1509398233.926 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:17:24.772Z,1509398244.772 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003495
CHAN A1 (24V): -0.003347
CHAN A2 (12V): -0.002601
CHAN A3 (5V): 0.000203
CHAN B0 (3.3V): -0.000089
CHAN B1 (3.15aV): -0.000134
CHAN B2 (3.15bV): -0.000145
CHAN B3 (GND): -0.000101
OPEN: -0.000197
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:18:11.303Z,1509398291.303 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:18:11.303Z,1509398291.303 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-30T21:18:11.303Z,1509398291.303 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:18:11.337Z,1509398291.337 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:18:11.695Z,1509398291.695 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:18:11.695Z,1509398291.695 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-30T21:18:12.069Z,1509398292.069 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:18:12.070Z,1509398292.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:18:12.070Z,1509398292.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:18:56.673Z,1509398336.673 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:19:07.187Z,1509398347.187 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135142
CHAN A1 (24V): -0.003385
CHAN A2 (12V): -0.002628
CHAN A3 (5V): -0.000091
CHAN B0 (3.3V): -0.000180
CHAN B1 (3.15aV): 0.000293
CHAN B2 (3.15bV): -0.000658
CHAN B3 (GND): 0.000029
OPEN: -0.000245
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:19:52.752Z,1509398392.752 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T21:19:52.752Z,1509398392.752 [Default:CheckIn:C.Wait] Stopped
2017-10-30T21:19:52.753Z,1509398392.753 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T21:19:52.753Z,1509398392.753 [Default:CheckIn:D] Running Loop=1
2017-10-30T21:19:53.162Z,1509398393.162 [Default:CheckIn:D] Stopped
2017-10-30T21:19:53.162Z,1509398393.162 [Default:CheckIn:E] Running Loop=1
2017-10-30T21:19:53.551Z,1509398393.551 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 13.445331 min 
2017-10-30T21:19:53.551Z,1509398393.551 [Default:CheckIn:E] Stopped
2017-10-30T21:19:53.552Z,1509398393.552 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T21:19:53.552Z,1509398393.552 [Default:CheckIn] Stopped
2017-10-30T21:19:53.552Z,1509398393.552 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T21:19:53.552Z,1509398393.552 [Default:CheckIn](INFO): Running loop #3
2017-10-30T21:19:53.552Z,1509398393.552 [Default:CheckIn] Running Loop=3
2017-10-30T21:19:53.552Z,1509398393.552 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T21:19:53.552Z,1509398393.552 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T21:19:56.928Z,1509398396.928 [NAL9602](INFO): Powering up
2017-10-30T21:20:08.096Z,1509398408.096 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:20:33.706Z,1509398433.706 [NAL9602](INFO): SBD MO Status=2, MOMSN=3292, MT Status=2, MTMSN=0
2017-10-30T21:20:33.706Z,1509398433.706 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T21:20:37.373Z,1509398437.373 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:20:48.167Z,1509398448.167 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002979
CHAN A1 (24V): -0.003792
CHAN A2 (12V): -0.001938
CHAN A3 (5V): -0.000379
CHAN B0 (3.3V): -0.000290
CHAN B1 (3.15aV): -0.000454
CHAN B2 (3.15bV): -0.000405
CHAN B3 (GND): 0.000137
OPEN: -0.000032
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:21:12.097Z,1509398472.097 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:21:12.097Z,1509398472.097 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-30T21:21:12.097Z,1509398472.097 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:21:12.110Z,1509398472.110 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:21:12.476Z,1509398472.476 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:21:12.477Z,1509398472.477 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-30T21:21:12.874Z,1509398472.874 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:21:12.874Z,1509398472.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:21:12.874Z,1509398472.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:21:16.834Z,1509398476.834 [NAL9602](INFO): SBD MO Status=0, MOMSN=3292, MT Status=0, MTMSN=0
2017-10-30T21:21:16.834Z,1509398476.834 [NAL9602](INFO): No messages in MT queue
2017-10-30T21:22:18.528Z,1509398538.528 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:22:22.886Z,1509398542.886 [BPC1](ERROR): Failed to receive battery data
2017-10-30T21:22:22.886Z,1509398542.886 [BPC1] Communications Fault, FailCount= 1
2017-10-30T21:22:22.887Z,1509398542.887 [BPC1](ERROR): Communications Fault
2017-10-30T21:22:22.910Z,1509398542.910 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T21:22:24.121Z,1509398544.121 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:22:24.122Z,1509398544.122 [BPC1] No Fault, FailCount= 1
2017-10-30T21:22:29.328Z,1509398549.328 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003145
CHAN A1 (24V): -0.003586
CHAN A2 (12V): -0.002201
CHAN A3 (5V): 0.000174
CHAN B0 (3.3V): 0.000038
CHAN B1 (3.15aV): -0.000225
CHAN B2 (3.15bV): -0.000134
CHAN B3 (GND): -0.000118
OPEN: -0.000174
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:23:05.915Z,1509398585.915 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T21:23:59.672Z,1509398639.672 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:24:10.473Z,1509398650.473 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134601
CHAN A1 (24V): -0.003398
CHAN A2 (12V): -0.002180
CHAN A3 (5V): 0.000739
CHAN B0 (3.3V): -0.000511
CHAN B1 (3.15aV): -0.000313
CHAN B2 (3.15bV): -0.000076
CHAN B3 (GND): 0.000382
OPEN: -0.000382
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:24:13.235Z,1509398653.235 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:24:13.236Z,1509398653.236 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-30T21:24:13.236Z,1509398653.236 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:24:13.249Z,1509398653.249 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:24:13.671Z,1509398653.671 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:24:13.672Z,1509398653.672 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-30T21:24:14.058Z,1509398654.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:24:14.058Z,1509398654.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:24:14.059Z,1509398654.059 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:24:40.029Z,1509398680.029 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T21:24:40.029Z,1509398680.029 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:24:40.029Z,1509398680.029 [BPC1](ERROR): Data Fault
2017-10-30T21:24:40.077Z,1509398680.077 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:24:41.287Z,1509398681.287 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:24:41.287Z,1509398681.287 [BPC1] No Fault, FailCount= 1
2017-10-30T21:24:53.203Z,1509398693.203 [NAL9602](INFO): GPS fix at 20171030T212452: (36.802853, -121.788011)
2017-10-30T21:24:53.268Z,1509398693.268 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T21:24:53.268Z,1509398693.268 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T21:24:57.877Z,1509398697.877 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20171030T210256/Courier0012.lzma
2017-10-30T21:24:58.652Z,1509398698.652 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0012.lzma.bak
2017-10-30T21:24:58.652Z,1509398698.652 [DataOverHttps](INFO): SBD MOMSN=5177099
2017-10-30T21:24:59.105Z,1509398699.105 [PNI_TCM](ERROR): CRC does not match. Expected:0x25248 got:0x16543
2017-10-30T21:25:11.279Z,1509398711.279 [DataOverHttps](INFO): Sending 545 bytes from file Logs/20171030T210256/Express0013.lzma
2017-10-30T21:25:12.009Z,1509398712.009 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0013.lzma.bak
2017-10-30T21:25:12.009Z,1509398712.009 [DataOverHttps](INFO): SBD MOMSN=5177102
2017-10-30T21:25:12.497Z,1509398712.497 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T21:25:12.497Z,1509398712.497 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T21:25:12.498Z,1509398712.498 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T21:25:28.230Z,1509398728.230 [NAL9602](INFO): Powering down
2017-10-30T21:25:40.698Z,1509398740.698 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:25:51.518Z,1509398751.518 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003615
CHAN A1 (24V): -0.003235
CHAN A2 (12V): -0.001623
CHAN A3 (5V): 0.000310
CHAN B0 (3.3V): -0.000101
CHAN B1 (3.15aV): -0.000169
CHAN B2 (3.15bV): -0.000079
CHAN B3 (GND): 0.000002
OPEN: -0.000395
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:27:16.541Z,1509398836.541 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:27:16.541Z,1509398836.541 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-30T21:27:16.541Z,1509398836.541 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:27:16.583Z,1509398836.583 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:27:16.728Z,1509398836.728 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:27:16.728Z,1509398836.728 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-30T21:27:17.047Z,1509398837.047 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:27:17.047Z,1509398837.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:27:17.047Z,1509398837.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:27:21.895Z,1509398841.895 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:27:32.663Z,1509398852.663 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134636
CHAN A1 (24V): -0.003391
CHAN A2 (12V): 4.697929
CHAN A3 (5V): 0.000451
CHAN B0 (3.3V): -0.000134
CHAN B1 (3.15aV): -0.000266
CHAN B2 (3.15bV): 0.000304
CHAN B3 (GND): 0.000244
OPEN: -0.000476
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:29:03.059Z,1509398943.059 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:29:06.614Z,1509398946.614 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T21:29:06.614Z,1509398946.614 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:29:06.614Z,1509398946.614 [BPC1](ERROR): Data Fault
2017-10-30T21:29:06.645Z,1509398946.645 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:29:07.853Z,1509398947.853 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:29:07.853Z,1509398947.853 [BPC1] No Fault, FailCount= 1
2017-10-30T21:29:13.832Z,1509398953.832 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003378
CHAN A1 (24V): -0.002796
CHAN A2 (12V): -0.002127
CHAN A3 (5V): 0.000388
CHAN B0 (3.3V): -0.000028
CHAN B1 (3.15aV): 0.000364
CHAN B2 (3.15bV): -0.000282
CHAN B3 (GND): -0.000053
OPEN: -0.000454
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:29:32.540Z,1509398972.540 [BPC1](ERROR): Failed to receive battery data
2017-10-30T21:29:32.540Z,1509398972.540 [BPC1] Communications Fault, FailCount= 2
2017-10-30T21:29:32.540Z,1509398972.540 [BPC1](ERROR): Communications Fault
2017-10-30T21:29:32.602Z,1509398972.602 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T21:29:33.785Z,1509398973.785 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:29:33.785Z,1509398973.785 [BPC1] No Fault, FailCount= 2
2017-10-30T21:30:12.970Z,1509399012.970 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T21:30:12.971Z,1509399012.971 [Default:CheckIn:C.Wait] Stopped
2017-10-30T21:30:12.971Z,1509399012.971 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T21:30:12.971Z,1509399012.971 [Default:CheckIn:D] Running Loop=1
2017-10-30T21:30:13.377Z,1509399013.377 [Default:CheckIn:D] Stopped
2017-10-30T21:30:13.378Z,1509399013.378 [Default:CheckIn:E] Running Loop=1
2017-10-30T21:30:13.779Z,1509399013.779 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 23.782263 min 
2017-10-30T21:30:13.779Z,1509399013.779 [Default:CheckIn:E] Stopped
2017-10-30T21:30:13.779Z,1509399013.779 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T21:30:13.779Z,1509399013.779 [Default:CheckIn] Stopped
2017-10-30T21:30:13.780Z,1509399013.780 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T21:30:13.784Z,1509399013.784 [Default:CheckIn](INFO): Running loop #4
2017-10-30T21:30:13.784Z,1509399013.784 [Default:CheckIn] Running Loop=4
2017-10-30T21:30:13.784Z,1509399013.784 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T21:30:13.784Z,1509399013.784 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T21:30:17.395Z,1509399017.395 [NAL9602](INFO): Powering up
2017-10-30T21:30:17.522Z,1509399017.522 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:30:17.522Z,1509399017.522 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-30T21:30:17.522Z,1509399017.522 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:30:17.546Z,1509399017.546 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:30:17.693Z,1509399017.693 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:30:17.693Z,1509399017.693 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-30T21:30:18.016Z,1509399018.016 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:30:18.016Z,1509399018.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:30:18.017Z,1509399018.017 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:30:28.365Z,1509399028.365 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:30:44.042Z,1509399044.042 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:30:54.839Z,1509399054.839 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134345
CHAN A1 (24V): -0.004233
CHAN A2 (12V): -0.002021
CHAN A3 (5V): 0.000371
CHAN B0 (3.3V): 0.000441
CHAN B1 (3.15aV): -0.000167
CHAN B2 (3.15bV): -0.000543
CHAN B3 (GND): -0.000107
OPEN: -0.000315
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:31:21.310Z,1509399081.310 [NAL9602](INFO): SBD MO Status=2, MOMSN=3293, MT Status=2, MTMSN=0
2017-10-30T21:31:21.310Z,1509399081.310 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T21:32:24.881Z,1509399144.881 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:32:28.804Z,1509399148.804 [NAL9602](INFO): SBD MO Status=2, MOMSN=3293, MT Status=2, MTMSN=0
2017-10-30T21:32:28.805Z,1509399148.805 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T21:32:35.665Z,1509399155.665 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002869
CHAN A1 (24V): -0.004123
CHAN A2 (12V): -0.002333
CHAN A3 (5V): 0.000439
CHAN B0 (3.3V): -0.000183
CHAN B1 (3.15aV): -0.000391
CHAN B2 (3.15bV): 0.000078
CHAN B3 (GND): 0.000320
OPEN: -0.000433
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:32:50.811Z,1509399170.811 [NAL9602](INFO): SBD MO Status=2, MOMSN=3293, MT Status=2, MTMSN=0
2017-10-30T21:32:50.811Z,1509399170.811 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T21:32:53.234Z,1509399173.234 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-30T21:32:53.234Z,1509399173.234 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:32:53.234Z,1509399173.234 [BPC1](ERROR): Data Fault
2017-10-30T21:32:53.301Z,1509399173.301 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:32:54.493Z,1509399174.493 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:32:54.493Z,1509399174.493 [BPC1] No Fault, FailCount= 1
2017-10-30T21:33:04.405Z,1509399184.405 [NAL9602](INFO): SBD MO Status=0, MOMSN=3293, MT Status=0, MTMSN=0
2017-10-30T21:33:04.405Z,1509399184.405 [NAL9602](INFO): No messages in MT queue
2017-10-30T21:33:06.095Z,1509399186.095 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T21:33:18.373Z,1509399198.373 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:33:18.373Z,1509399198.373 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-30T21:33:18.373Z,1509399198.373 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:33:18.395Z,1509399198.395 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:33:18.543Z,1509399198.543 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:33:18.543Z,1509399198.543 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-30T21:33:18.896Z,1509399198.896 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:33:18.897Z,1509399198.897 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:33:18.897Z,1509399198.897 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:34:05.698Z,1509399245.698 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:34:18.372Z,1509399258.372 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134724
CHAN A1 (24V): -0.004007
CHAN A2 (12V): -0.002097
CHAN A3 (5V): 0.000130
CHAN B0 (3.3V): -0.000361
CHAN B1 (3.15aV): -0.000161
CHAN B2 (3.15bV): 0.000040
CHAN B3 (GND): 0.000312
OPEN: -0.000570
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:35:13.907Z,1509399313.907 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T21:30:13.8Z
2017-10-30T21:35:13.907Z,1509399313.907 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T21:35:13.907Z,1509399313.907 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T21:35:18.567Z,1509399318.567 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0016.lzma
2017-10-30T21:35:19.317Z,1509399319.317 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0016.lzma.bak
2017-10-30T21:35:19.317Z,1509399319.317 [DataOverHttps](INFO): SBD MOMSN=5177118
2017-10-30T21:35:28.743Z,1509399328.743 [DataOverHttps](INFO): Sending 549 bytes from file Logs/20171030T210256/Express0017.lzma
2017-10-30T21:35:29.515Z,1509399329.515 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0017.lzma.bak
2017-10-30T21:35:29.516Z,1509399329.516 [DataOverHttps](INFO): SBD MOMSN=5177120
2017-10-30T21:35:29.978Z,1509399329.978 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T21:35:29.978Z,1509399329.978 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T21:35:29.978Z,1509399329.978 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T21:35:44.628Z,1509399344.628 [NAL9602](INFO): Powering down
2017-10-30T21:35:48.702Z,1509399348.702 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:35:59.505Z,1509399359.505 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003681
CHAN A1 (24V): -0.003065
CHAN A2 (12V): -0.002112
CHAN A3 (5V): 0.000448
CHAN B0 (3.3V): -0.000261
CHAN B1 (3.15aV): 4.767929
CHAN B2 (3.15bV): 0.000299
CHAN B3 (GND): 4.792929
OPEN: -0.000304
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:36:19.074Z,1509399379.074 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:36:19.074Z,1509399379.074 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-30T21:36:19.074Z,1509399379.074 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:36:19.088Z,1509399379.088 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:36:19.532Z,1509399379.532 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:36:19.532Z,1509399379.532 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-30T21:36:19.880Z,1509399379.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:36:19.881Z,1509399379.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:36:19.881Z,1509399379.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:37:29.874Z,1509399449.874 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:37:43.713Z,1509399463.713 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135257
CHAN A1 (24V): -0.002890
CHAN A2 (12V): -0.001464
CHAN A3 (5V): 0.000117
CHAN B0 (3.3V): -0.000248
CHAN B1 (3.15aV): 0.000376
CHAN B2 (3.15bV): -0.000178
CHAN B3 (GND): 0.000486
OPEN: -0.000412
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:39:13.927Z,1509399553.927 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:39:19.960Z,1509399559.960 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:39:19.960Z,1509399559.960 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-30T21:39:19.960Z,1509399559.960 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:39:19.973Z,1509399559.973 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:39:20.358Z,1509399560.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:39:20.358Z,1509399560.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-30T21:39:20.729Z,1509399560.729 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:39:20.730Z,1509399560.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:39:20.730Z,1509399560.730 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:39:24.743Z,1509399564.743 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003292
CHAN A1 (24V): -0.003285
CHAN A2 (12V): 4.697929
CHAN A3 (5V): 0.000006
CHAN B0 (3.3V): -0.000195
CHAN B1 (3.15aV): -0.000588
CHAN B2 (3.15bV): -0.000208
CHAN B3 (GND): -0.000266
OPEN: -0.000532
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:39:39.799Z,1509399579.799 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-30T21:39:39.799Z,1509399579.799 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:39:39.799Z,1509399579.799 [BPC1](ERROR): Data Fault
2017-10-30T21:39:39.834Z,1509399579.834 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:39:41.029Z,1509399581.029 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:39:41.029Z,1509399581.029 [BPC1] No Fault, FailCount= 1
2017-10-30T21:40:30.603Z,1509399630.603 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T21:40:30.604Z,1509399630.604 [Default:CheckIn:C.Wait] Stopped
2017-10-30T21:40:30.604Z,1509399630.604 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T21:40:30.604Z,1509399630.604 [Default:CheckIn:D] Running Loop=1
2017-10-30T21:40:31.003Z,1509399631.003 [Default:CheckIn:D] Stopped
2017-10-30T21:40:31.003Z,1509399631.003 [Default:CheckIn:E] Running Loop=1
2017-10-30T21:40:31.395Z,1509399631.395 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 34.076015 min 
2017-10-30T21:40:31.395Z,1509399631.395 [Default:CheckIn:E] Stopped
2017-10-30T21:40:31.395Z,1509399631.395 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T21:40:31.396Z,1509399631.396 [Default:CheckIn] Stopped
2017-10-30T21:40:31.396Z,1509399631.396 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T21:40:31.396Z,1509399631.396 [Default:CheckIn](INFO): Running loop #5
2017-10-30T21:40:31.396Z,1509399631.396 [Default:CheckIn] Running Loop=5
2017-10-30T21:40:31.396Z,1509399631.396 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T21:40:31.396Z,1509399631.396 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T21:40:35.187Z,1509399635.187 [NAL9602](INFO): Powering up
2017-10-30T21:40:46.093Z,1509399646.093 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:40:46.895Z,1509399646.895 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-30T21:40:46.895Z,1509399646.895 [NAL9602] Data Fault, FailCount= 1
2017-10-30T21:40:46.895Z,1509399646.895 [NAL9602](ERROR): Data Fault
2017-10-30T21:40:46.975Z,1509399646.975 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T21:40:47.295Z,1509399647.295 [NAL9602](INFO): Powering down
2017-10-30T21:40:48.180Z,1509399648.180 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T21:40:48.180Z,1509399648.180 [NAL9602] No Fault, FailCount= 1
2017-10-30T21:40:54.993Z,1509399654.993 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:41:05.760Z,1509399665.760 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135092
CHAN A1 (24V): -0.003324
CHAN A2 (12V): -0.002394
CHAN A3 (5V): 0.000020
CHAN B0 (3.3V): 0.000176
CHAN B1 (3.15aV): -0.000622
CHAN B2 (3.15bV): -0.000120
CHAN B3 (GND): 0.000097
OPEN: -0.000509
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:41:17.299Z,1509399677.299 [NAL9602](INFO): Powering up NAL9602
2017-10-30T21:41:28.502Z,1509399688.502 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:42:21.089Z,1509399741.089 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:42:21.089Z,1509399741.089 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-30T21:42:21.089Z,1509399741.089 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:42:21.111Z,1509399741.111 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:42:21.506Z,1509399741.506 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:42:21.507Z,1509399741.507 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-30T21:42:21.877Z,1509399741.877 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:42:21.878Z,1509399741.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:42:21.878Z,1509399741.878 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:42:35.825Z,1509399755.825 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:42:46.588Z,1509399766.588 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002802
CHAN A1 (24V): -0.004662
CHAN A2 (12V): -0.001932
CHAN A3 (5V): 0.000153
CHAN B0 (3.3V): -0.000057
CHAN B1 (3.15aV): -0.000375
CHAN B2 (3.15bV): -0.000478
CHAN B3 (GND): -0.000045
OPEN: -0.000506
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:43:06.177Z,1509399786.177 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T21:44:16.951Z,1509399856.951 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:44:27.772Z,1509399867.772 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134185
CHAN A1 (24V): -0.004195
CHAN A2 (12V): -0.002583
CHAN A3 (5V): -0.000471
CHAN B0 (3.3V): 0.000002
CHAN B1 (3.15aV): -0.000273
CHAN B2 (3.15bV): -0.000298
CHAN B3 (GND): -0.000112
OPEN: -0.000451
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:45:17.926Z,1509399917.926 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T21:45:17.926Z,1509399917.926 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:45:17.926Z,1509399917.926 [BPC1](ERROR): Data Fault
2017-10-30T21:45:17.975Z,1509399917.975 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:45:19.183Z,1509399919.183 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:45:19.183Z,1509399919.183 [BPC1] No Fault, FailCount= 1
2017-10-30T21:45:21.953Z,1509399921.953 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:45:21.953Z,1509399921.953 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-30T21:45:21.953Z,1509399921.953 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:45:21.966Z,1509399921.966 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:45:22.353Z,1509399922.353 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:45:22.353Z,1509399922.353 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-30T21:45:22.729Z,1509399922.729 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:45:22.746Z,1509399922.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:45:22.746Z,1509399922.746 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:45:31.549Z,1509399931.549 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T21:40:31.4Z
2017-10-30T21:45:31.549Z,1509399931.549 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T21:45:31.549Z,1509399931.549 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T21:45:36.188Z,1509399936.188 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0020.lzma
2017-10-30T21:45:36.986Z,1509399936.986 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0020.lzma.bak
2017-10-30T21:45:36.986Z,1509399936.986 [DataOverHttps](INFO): SBD MOMSN=5177135
2017-10-30T21:45:46.408Z,1509399946.408 [DataOverHttps](INFO): Sending 627 bytes from file Logs/20171030T210256/Express0021.lzma
2017-10-30T21:45:47.198Z,1509399947.198 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0021.lzma.bak
2017-10-30T21:45:47.198Z,1509399947.198 [DataOverHttps](INFO): SBD MOMSN=5177137
2017-10-30T21:45:47.671Z,1509399947.671 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T21:45:47.671Z,1509399947.671 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T21:45:47.672Z,1509399947.672 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T21:45:58.030Z,1509399958.030 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:46:08.859Z,1509399968.859 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002840
CHAN A1 (24V): -0.003582
CHAN A2 (12V): -0.002392
CHAN A3 (5V): 0.000253
CHAN B0 (3.3V): -0.000022
CHAN B1 (3.15aV): 0.000720
CHAN B2 (3.15bV): -0.000189
CHAN B3 (GND): -0.000392
OPEN: -0.000401
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:46:31.151Z,1509399991.151 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-30T21:47:01.903Z,1509400021.903 [NAL9602](INFO): Powering down
2017-10-30T21:47:39.200Z,1509400059.200 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:47:52.294Z,1509400072.294 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135328
CHAN A1 (24V): -0.003209
CHAN A2 (12V): -0.002418
CHAN A3 (5V): 0.000164
CHAN B0 (3.3V): -0.000398
CHAN B1 (3.15aV): -0.000314
CHAN B2 (3.15bV): -0.000420
CHAN B3 (GND): -0.000116
OPEN: -0.000526
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:48:23.073Z,1509400103.073 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:48:23.073Z,1509400103.073 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-30T21:48:23.073Z,1509400103.073 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:48:23.107Z,1509400103.107 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:48:23.475Z,1509400103.475 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:48:23.475Z,1509400103.475 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-30T21:48:23.863Z,1509400103.863 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:48:23.864Z,1509400103.864 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:48:23.864Z,1509400103.864 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:49:22.493Z,1509400162.493 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:49:33.299Z,1509400173.299 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003239
CHAN A1 (24V): -0.003309
CHAN A2 (12V): -0.002245
CHAN A3 (5V): 0.000068
CHAN B0 (3.3V): -0.000513
CHAN B1 (3.15aV): -0.000640
CHAN B2 (3.15bV): -0.000025
CHAN B3 (GND): 0.000371
OPEN: -0.000529
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:50:48.467Z,1509400248.467 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T21:50:48.467Z,1509400248.467 [Default:CheckIn:C.Wait] Stopped
2017-10-30T21:50:48.467Z,1509400248.467 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T21:50:48.467Z,1509400248.467 [Default:CheckIn:D] Running Loop=1
2017-10-30T21:50:48.867Z,1509400248.867 [Default:CheckIn:D] Stopped
2017-10-30T21:50:48.867Z,1509400248.867 [Default:CheckIn:E] Running Loop=1
2017-10-30T21:50:49.257Z,1509400249.257 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 44.373755 min 
2017-10-30T21:50:49.257Z,1509400249.257 [Default:CheckIn:E] Stopped
2017-10-30T21:50:49.257Z,1509400249.257 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T21:50:49.257Z,1509400249.257 [Default:CheckIn] Stopped
2017-10-30T21:50:49.257Z,1509400249.257 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T21:50:49.261Z,1509400249.261 [Default:CheckIn](INFO): Running loop #6
2017-10-30T21:50:49.262Z,1509400249.262 [Default:CheckIn] Running Loop=6
2017-10-30T21:50:49.262Z,1509400249.262 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T21:50:49.262Z,1509400249.262 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T21:50:53.059Z,1509400253.059 [NAL9602](INFO): Powering up
2017-10-30T21:51:03.635Z,1509400263.635 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:51:03.970Z,1509400263.970 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:51:14.462Z,1509400274.462 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134480
CHAN A1 (24V): -0.003600
CHAN A2 (12V): -0.001727
CHAN A3 (5V): 0.000782
CHAN B0 (3.3V): 0.000111
CHAN B1 (3.15aV): -0.000740
CHAN B2 (3.15bV): -0.000581
CHAN B3 (GND): -0.000050
OPEN: -0.000624
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:51:24.011Z,1509400284.011 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:51:24.011Z,1509400284.011 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-30T21:51:24.011Z,1509400284.011 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:51:24.033Z,1509400284.033 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:51:24.437Z,1509400284.437 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:51:24.437Z,1509400284.437 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-30T21:51:24.818Z,1509400284.818 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:51:24.819Z,1509400284.819 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:51:24.819Z,1509400284.819 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:51:35.973Z,1509400295.973 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-30T21:51:36.048Z,1509400296.048 [NAL9602](FAULT): received: 
+CSQ:0

OK93, 0, 0, 0, 0

OK
2017-10-30T21:51:36.048Z,1509400296.048 [NAL9602] Data Fault, FailCount= 2
2017-10-30T21:51:36.048Z,1509400296.048 [NAL9602](ERROR): Data Fault
2017-10-30T21:51:36.120Z,1509400296.120 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T21:51:36.369Z,1509400296.369 [NAL9602](INFO): Powering down
2017-10-30T21:51:37.257Z,1509400297.257 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T21:51:37.257Z,1509400297.257 [NAL9602] No Fault, FailCount= 2
2017-10-30T21:52:06.541Z,1509400326.541 [NAL9602](INFO): Powering up NAL9602
2017-10-30T21:52:17.342Z,1509400337.342 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:52:18.140Z,1509400338.140 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-30T21:52:18.140Z,1509400338.140 [NAL9602] Data Fault, FailCount= 3
2017-10-30T21:52:18.140Z,1509400338.140 [NAL9602](ERROR): Data Fault
2017-10-30T21:52:18.227Z,1509400338.227 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T21:52:18.540Z,1509400338.540 [NAL9602](INFO): Powering down
2017-10-30T21:52:19.400Z,1509400339.400 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T21:52:19.400Z,1509400339.400 [NAL9602] No Fault, FailCount= 3
2017-10-30T21:52:44.599Z,1509400364.599 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:52:48.960Z,1509400368.960 [NAL9602](INFO): Powering up NAL9602
2017-10-30T21:52:57.755Z,1509400377.755 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003409
CHAN A1 (24V): -0.003345
CHAN A2 (12V): -0.002012
CHAN A3 (5V): -0.000012
CHAN B0 (3.3V): -0.000175
CHAN B1 (3.15aV): -0.000897
CHAN B2 (3.15bV): 0.000043
CHAN B3 (GND): 0.000243
OPEN: -0.000212
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:53:00.098Z,1509400380.098 [NAL9602](INFO): NAL9602 initialized
2017-10-30T21:53:06.201Z,1509400386.201 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T21:54:24.958Z,1509400464.958 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:54:24.958Z,1509400464.958 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-30T21:54:24.958Z,1509400464.958 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:54:24.971Z,1509400464.971 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:54:25.358Z,1509400465.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:54:25.358Z,1509400465.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-30T21:54:25.758Z,1509400465.758 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:54:25.758Z,1509400465.758 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:54:25.759Z,1509400465.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:54:27.775Z,1509400467.775 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:54:38.578Z,1509400478.578 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134912
CHAN A1 (24V): -0.003974
CHAN A2 (12V): -0.002454
CHAN A3 (5V): 0.000053
CHAN B0 (3.3V): 0.000193
CHAN B1 (3.15aV): -0.000240
CHAN B2 (3.15bV): -0.000328
CHAN B3 (GND): 0.000149
OPEN: -0.000498
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:55:09.497Z,1509400509.497 [BPC1](ERROR): Failed to receive battery data
2017-10-30T21:55:09.497Z,1509400509.497 [BPC1] Communications Fault, FailCount= 1
2017-10-30T21:55:09.497Z,1509400509.497 [BPC1](ERROR): Communications Fault
2017-10-30T21:55:09.621Z,1509400509.621 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T21:55:10.818Z,1509400510.818 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:55:10.818Z,1509400510.818 [BPC1] No Fault, FailCount= 1
2017-10-30T21:55:49.508Z,1509400549.508 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T21:50:49.3Z
2017-10-30T21:55:49.509Z,1509400549.509 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T21:55:49.509Z,1509400549.509 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T21:55:54.120Z,1509400554.120 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0024.lzma
2017-10-30T21:55:54.887Z,1509400554.887 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0024.lzma.bak
2017-10-30T21:55:54.887Z,1509400554.887 [DataOverHttps](INFO): SBD MOMSN=5177153
2017-10-30T21:56:04.281Z,1509400564.281 [DataOverHttps](INFO): Sending 687 bytes from file Logs/20171030T210256/Express0025.lzma
2017-10-30T21:56:05.027Z,1509400565.027 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0025.lzma.bak
2017-10-30T21:56:05.027Z,1509400565.027 [DataOverHttps](INFO): SBD MOMSN=5177155
2017-10-30T21:56:05.512Z,1509400565.512 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T21:56:05.512Z,1509400565.512 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T21:56:05.512Z,1509400565.512 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T21:56:09.175Z,1509400569.175 [NAL9602](INFO): SBD MO Status=2, MOMSN=3294, MT Status=2, MTMSN=0
2017-10-30T21:56:09.176Z,1509400569.176 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T21:56:09.241Z,1509400569.241 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:56:09.318Z,1509400569.318 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-30T21:56:19.729Z,1509400579.729 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002857
CHAN A1 (24V): -0.003944
CHAN A2 (12V): -0.001639
CHAN A3 (5V): -0.000251
CHAN B0 (3.3V): -0.000002
CHAN B1 (3.15aV): -0.000090
CHAN B2 (3.15bV): -0.000226
CHAN B3 (GND): 0.000433
OPEN: -0.000524
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:56:40.065Z,1509400600.065 [NAL9602](INFO): Powering down
2017-10-30T21:56:59.693Z,1509400619.693 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-30T21:56:59.693Z,1509400619.693 [BPC1] Data Fault, FailCount= 1
2017-10-30T21:56:59.693Z,1509400619.693 [BPC1](ERROR): Data Fault
2017-10-30T21:56:59.755Z,1509400619.755 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T21:57:00.944Z,1509400620.944 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:57:00.945Z,1509400620.945 [BPC1] No Fault, FailCount= 1
2017-10-30T21:57:26.093Z,1509400646.093 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T21:57:26.093Z,1509400646.093 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-30T21:57:26.093Z,1509400646.093 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T21:57:26.106Z,1509400646.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T21:57:26.501Z,1509400646.501 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T21:57:26.501Z,1509400646.501 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-30T21:57:26.881Z,1509400646.881 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T21:57:26.882Z,1509400646.882 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T21:57:26.882Z,1509400646.882 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T21:57:50.089Z,1509400670.089 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:58:00.896Z,1509400680.896 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135171
CHAN A1 (24V): -0.003315
CHAN A2 (12V): -0.002148
CHAN A3 (5V): 0.000483
CHAN B0 (3.3V): -0.000145
CHAN B1 (3.15aV): 0.000040
CHAN B2 (3.15bV): -0.000089
CHAN B3 (GND): -0.000874
OPEN: -0.000465
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T21:58:35.472Z,1509400715.472 [BPC1](ERROR): Failed to receive battery data
2017-10-30T21:58:35.472Z,1509400715.472 [BPC1] Communications Fault, FailCount= 1
2017-10-30T21:58:35.472Z,1509400715.472 [BPC1](ERROR): Communications Fault
2017-10-30T21:58:35.531Z,1509400715.531 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T21:58:36.722Z,1509400716.722 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T21:58:36.722Z,1509400716.722 [BPC1] No Fault, FailCount= 1
2017-10-30T21:59:31.262Z,1509400771.262 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T21:59:42.098Z,1509400782.098 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003037
CHAN A1 (24V): -0.003179
CHAN A2 (12V): -0.001705
CHAN A3 (5V): 0.000615
CHAN B0 (3.3V): -0.000037
CHAN B1 (3.15aV): -0.000557
CHAN B2 (3.15bV): -0.000151
CHAN B3 (GND): 0.000049
OPEN: -0.000359
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:00:27.050Z,1509400827.050 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:00:27.050Z,1509400827.050 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-30T22:00:27.050Z,1509400827.050 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:00:27.083Z,1509400827.083 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:00:27.464Z,1509400827.464 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:00:27.464Z,1509400827.464 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-30T22:00:27.852Z,1509400827.852 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:00:27.857Z,1509400827.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:00:27.857Z,1509400827.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:01:06.255Z,1509400866.255 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T22:01:06.256Z,1509400866.256 [Default:CheckIn:C.Wait] Stopped
2017-10-30T22:01:06.256Z,1509400866.256 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T22:01:06.256Z,1509400866.256 [Default:CheckIn:D] Running Loop=1
2017-10-30T22:01:06.645Z,1509400866.645 [Default:CheckIn:D] Stopped
2017-10-30T22:01:06.645Z,1509400866.645 [Default:CheckIn:E] Running Loop=1
2017-10-30T22:01:07.070Z,1509400867.070 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 54.670060 min 
2017-10-30T22:01:07.070Z,1509400867.070 [Default:CheckIn:E] Stopped
2017-10-30T22:01:07.082Z,1509400867.082 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T22:01:07.082Z,1509400867.082 [Default:CheckIn] Stopped
2017-10-30T22:01:07.082Z,1509400867.082 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T22:01:07.083Z,1509400867.083 [Default:CheckIn](INFO): Running loop #7
2017-10-30T22:01:07.083Z,1509400867.083 [Default:CheckIn] Running Loop=7
2017-10-30T22:01:07.083Z,1509400867.083 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T22:01:07.083Z,1509400867.083 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T22:01:10.594Z,1509400870.594 [NAL9602](INFO): Powering up
2017-10-30T22:01:12.233Z,1509400872.233 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:01:21.743Z,1509400881.743 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:01:23.036Z,1509400883.036 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003080
CHAN A1 (24V): -0.004159
CHAN A2 (12V): -0.001982
CHAN A3 (5V): 0.000029
CHAN B0 (3.3V): -0.000024
CHAN B1 (3.15aV): 0.000125
CHAN B2 (3.15bV): -0.000078
CHAN B3 (GND): 0.000386
OPEN: -0.000247
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:02:11.569Z,1509400931.569 [PNI_TCM](ERROR): CRC does not match. Expected:0x65530 got:0x36633
2017-10-30T22:02:53.227Z,1509400973.227 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:03:04.027Z,1509400984.027 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134353
CHAN A1 (24V): -0.003362
CHAN A2 (12V): -0.001892
CHAN A3 (5V): 0.000736
CHAN B0 (3.3V): -0.000018
CHAN B1 (3.15aV): -0.000640
CHAN B2 (3.15bV): -0.000608
CHAN B3 (GND): 0.000187
OPEN: -0.000389
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:03:06.395Z,1509400986.395 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T22:03:27.924Z,1509401007.924 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:03:27.924Z,1509401007.924 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-30T22:03:27.925Z,1509401007.925 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:03:27.954Z,1509401007.954 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:03:28.347Z,1509401008.347 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:03:28.347Z,1509401008.347 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-30T22:03:28.737Z,1509401008.737 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:03:28.737Z,1509401008.737 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:03:28.738Z,1509401008.738 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:04:34.162Z,1509401074.162 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:04:44.958Z,1509401084.958 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003110
CHAN A1 (24V): -0.003318
CHAN A2 (12V): -0.002154
CHAN A3 (5V): 0.000058
CHAN B0 (3.3V): 0.000119
CHAN B1 (3.15aV): -0.000190
CHAN B2 (3.15bV): 0.000125
CHAN B3 (GND): 0.000009
OPEN: -0.000270
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:05:05.317Z,1509401105.317 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:05:05.317Z,1509401105.317 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:05:05.317Z,1509401105.317 [BPC1](ERROR): Communications Fault
2017-10-30T22:05:05.397Z,1509401105.397 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:05:06.580Z,1509401106.580 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:05:06.580Z,1509401106.580 [BPC1] No Fault, FailCount= 1
2017-10-30T22:05:37.973Z,1509401137.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x38763 got:0x49067
2017-10-30T22:05:45.592Z,1509401145.592 [PNI_TCM](ERROR): CRC does not match. Expected:0x20461 got:0x25935
2017-10-30T22:05:47.953Z,1509401147.953 [NAL9602](INFO): SBD MO Status=2, MOMSN=3294, MT Status=2, MTMSN=0
2017-10-30T22:05:47.953Z,1509401147.953 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T22:06:07.232Z,1509401167.232 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T22:01:07.1Z
2017-10-30T22:06:07.232Z,1509401167.232 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T22:06:07.232Z,1509401167.232 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T22:06:11.659Z,1509401171.659 [PNI_TCM](ERROR): CRC does not match. Expected:0x61106 got:0x16818
2017-10-30T22:06:11.659Z,1509401171.659 [PNI_TCM](ERROR): CRC does not match. Expected:0x53919 got:0x16818
2017-10-30T22:06:11.659Z,1509401171.659 [PNI_TCM](ERROR): CRC does not match. Expected:0x12716 got:0x16818
2017-10-30T22:06:11.660Z,1509401171.660 [PNI_TCM](ERROR): CRC does not match. Expected:0x35913 got:0x16818
2017-10-30T22:06:11.660Z,1509401171.660 [PNI_TCM](ERROR): CRC does not match. Expected:0x13330 got:0x16818
2017-10-30T22:06:11.661Z,1509401171.661 [PNI_TCM](ERROR): CRC does not match. Expected:0x63171 got:0x16818
2017-10-30T22:06:11.661Z,1509401171.661 [PNI_TCM](ERROR): CRC does not match. Expected:0x36723 got:0x16818
2017-10-30T22:06:11.661Z,1509401171.661 [PNI_TCM](ERROR): CRC does not match. Expected:0x56197 got:0x16818
2017-10-30T22:06:11.853Z,1509401171.853 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0028.lzma
2017-10-30T22:06:12.649Z,1509401172.649 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0028.lzma.bak
2017-10-30T22:06:12.649Z,1509401172.649 [DataOverHttps](INFO): SBD MOMSN=5177173
2017-10-30T22:06:16.787Z,1509401176.787 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:06:21.934Z,1509401181.934 [DataOverHttps](INFO): Sending 629 bytes from file Logs/20171030T210256/Express0029.lzma
2017-10-30T22:06:22.736Z,1509401182.736 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0029.lzma.bak
2017-10-30T22:06:22.736Z,1509401182.736 [DataOverHttps](INFO): SBD MOMSN=5177175
2017-10-30T22:06:23.215Z,1509401183.215 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T22:06:23.215Z,1509401183.215 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T22:06:23.215Z,1509401183.215 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T22:06:26.820Z,1509401186.820 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-30T22:06:29.024Z,1509401189.024 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:06:29.024Z,1509401189.024 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-30T22:06:29.024Z,1509401189.024 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:06:29.038Z,1509401189.037 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:06:29.447Z,1509401189.447 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:06:29.447Z,1509401189.447 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-30T22:06:29.827Z,1509401189.827 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:06:29.828Z,1509401189.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:06:29.828Z,1509401189.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:06:32.256Z,1509401192.256 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134434
CHAN A1 (24V): -0.003671
CHAN A2 (12V): -0.002625
CHAN A3 (5V): 0.000421
CHAN B0 (3.3V): 0.000216
CHAN B1 (3.15aV): 0.000148
CHAN B2 (3.15bV): -0.000401
CHAN B3 (GND): -0.000101
OPEN: -0.000456
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:06:56.981Z,1509401216.981 [NAL9602](INFO): Powering down
2017-10-30T22:08:02.489Z,1509401282.489 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:08:13.270Z,1509401293.270 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135298
CHAN A1 (24V): -0.003379
CHAN A2 (12V): -0.002313
CHAN A3 (5V): 0.000450
CHAN B0 (3.3V): -0.000249
CHAN B1 (3.15aV): -0.000066
CHAN B2 (3.15bV): 0.000128
CHAN B3 (GND): 0.000126
OPEN: -0.000615
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:09:30.044Z,1509401370.044 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:09:30.044Z,1509401370.044 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-30T22:09:30.044Z,1509401370.044 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:09:30.078Z,1509401370.078 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:09:30.445Z,1509401370.445 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:09:30.445Z,1509401370.445 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-30T22:09:30.853Z,1509401370.853 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:09:30.854Z,1509401370.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:09:30.854Z,1509401370.854 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:09:43.653Z,1509401383.653 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:09:54.452Z,1509401394.452 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003881
CHAN A1 (24V): -0.003308
CHAN A2 (12V): -0.002147
CHAN A3 (5V): 0.000350
CHAN B0 (3.3V): -0.000634
CHAN B1 (3.15aV): -0.000305
CHAN B2 (3.15bV): 0.000240
CHAN B3 (GND): -0.000110
OPEN: -0.000801
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:10:40.593Z,1509401440.593 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T22:10:40.593Z,1509401440.593 [BPC1] Data Fault, FailCount= 1
2017-10-30T22:10:40.593Z,1509401440.593 [BPC1](ERROR): Data Fault
2017-10-30T22:10:40.648Z,1509401440.648 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T22:10:41.856Z,1509401441.856 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:10:41.856Z,1509401441.856 [BPC1] No Fault, FailCount= 1
2017-10-30T22:11:23.816Z,1509401483.816 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T22:11:23.816Z,1509401483.816 [Default:CheckIn:C.Wait] Stopped
2017-10-30T22:11:23.816Z,1509401483.816 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T22:11:23.816Z,1509401483.816 [Default:CheckIn:D] Running Loop=1
2017-10-30T22:11:24.225Z,1509401484.225 [Default:CheckIn:D] Stopped
2017-10-30T22:11:24.225Z,1509401484.225 [Default:CheckIn:E] Running Loop=1
2017-10-30T22:11:24.611Z,1509401484.611 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 64.963062 min 
2017-10-30T22:11:24.611Z,1509401484.611 [Default:CheckIn:E] Stopped
2017-10-30T22:11:24.612Z,1509401484.612 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T22:11:24.612Z,1509401484.612 [Default:CheckIn] Stopped
2017-10-30T22:11:24.612Z,1509401484.612 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T22:11:24.612Z,1509401484.612 [Default:CheckIn](INFO): Running loop #8
2017-10-30T22:11:24.612Z,1509401484.612 [Default:CheckIn] Running Loop=8
2017-10-30T22:11:24.612Z,1509401484.612 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T22:11:24.612Z,1509401484.612 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T22:11:24.643Z,1509401484.643 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:11:28.222Z,1509401488.222 [NAL9602](INFO): Powering up
2017-10-30T22:11:38.670Z,1509401498.670 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134503
CHAN A1 (24V): -0.003483
CHAN A2 (12V): -0.002309
CHAN A3 (5V): 0.000412
CHAN B0 (3.3V): 0.000082
CHAN B1 (3.15aV): 0.000140
CHAN B2 (3.15bV): -0.000523
CHAN B3 (GND): 0.000011
OPEN: -0.000492
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:11:39.419Z,1509401499.419 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:11:40.205Z,1509401500.205 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-30T22:11:40.205Z,1509401500.205 [NAL9602] Data Fault, FailCount= 4
2017-10-30T22:11:40.205Z,1509401500.205 [NAL9602](ERROR): Data Fault
2017-10-30T22:11:40.296Z,1509401500.296 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T22:11:40.621Z,1509401500.621 [NAL9602](INFO): Powering down
2017-10-30T22:11:41.480Z,1509401501.480 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T22:11:41.481Z,1509401501.481 [NAL9602] No Fault, FailCount= 4
2017-10-30T22:12:11.006Z,1509401531.006 [NAL9602](INFO): Powering up NAL9602
2017-10-30T22:12:21.807Z,1509401541.807 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:12:31.245Z,1509401551.245 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:12:31.245Z,1509401551.245 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-30T22:12:31.245Z,1509401551.245 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:12:31.259Z,1509401551.259 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:12:31.612Z,1509401551.612 [PNI_TCM](ERROR): CRC does not match. Expected:0x2928 got:0x49066
2017-10-30T22:12:31.667Z,1509401551.667 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:12:31.667Z,1509401551.667 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-30T22:12:32.021Z,1509401552.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:12:32.049Z,1509401552.049 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:12:32.050Z,1509401552.050 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:12:38.007Z,1509401558.007 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-30T22:12:39.622Z,1509401559.622 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-30T22:12:42.807Z,1509401562.807 [PNI_TCM](ERROR): CRC does not match. Expected:0x31357 got:0x39963
2017-10-30T22:12:44.410Z,1509401564.410 [PNI_TCM](ERROR): CRC does not match. Expected:0x17883 got:0x11036
2017-10-30T22:12:49.599Z,1509401569.599 [PNI_TCM](ERROR): CRC does not match. Expected:0x7496 got:0x49066
2017-10-30T22:12:54.007Z,1509401574.007 [PNI_TCM](ERROR): CRC does not match. Expected:0x35311 got:0x28
2017-10-30T22:12:55.615Z,1509401575.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x57530 got:0x7490
2017-10-30T22:12:57.210Z,1509401577.210 [PNI_TCM](ERROR): CRC does not match. Expected:0x58230 got:0x43603
2017-10-30T22:13:03.599Z,1509401583.599 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-30T22:13:04.005Z,1509401584.005 [PNI_TCM](ERROR): CRC does not match. Expected:0x42609 got:0x8988
2017-10-30T22:13:06.452Z,1509401586.452 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T22:13:08.409Z,1509401588.409 [PNI_TCM](ERROR): CRC does not match. Expected:0x17035 got:0x197
2017-10-30T22:13:08.869Z,1509401588.869 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:13:10.008Z,1509401590.008 [PNI_TCM](ERROR): CRC does not match. Expected:0x13894 got:0x43842
2017-10-30T22:13:18.010Z,1509401598.010 [PNI_TCM](ERROR): CRC does not match. Expected:0x25313 got:0x7490
2017-10-30T22:13:19.610Z,1509401599.610 [PNI_TCM](ERROR): CRC does not match. Expected:0x62890 got:0x16938
2017-10-30T22:13:19.713Z,1509401599.713 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003258
CHAN A1 (24V): -0.004233
CHAN A2 (12V): -0.002068
CHAN A3 (5V): 0.000198
CHAN B0 (3.3V): 0.000014
CHAN B1 (3.15aV): 0.000075
CHAN B2 (3.15bV): 0.000095
CHAN B3 (GND): -0.000419
OPEN: -0.000309
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:14:49.731Z,1509401689.731 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:14:53.700Z,1509401693.700 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:14:53.700Z,1509401693.700 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:14:53.700Z,1509401693.700 [BPC1](ERROR): Communications Fault
2017-10-30T22:14:53.754Z,1509401693.754 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:14:54.946Z,1509401694.946 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:14:54.946Z,1509401694.946 [BPC1] No Fault, FailCount= 1
2017-10-30T22:15:00.557Z,1509401700.557 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002552
CHAN A1 (24V): -0.004168
CHAN A2 (12V): -0.002224
CHAN A3 (5V): 0.000236
CHAN B0 (3.3V): -0.000892
CHAN B1 (3.15aV): 0.000014
CHAN B2 (3.15bV): 0.000130
CHAN B3 (GND): 0.000152
OPEN: -0.000523
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:15:32.276Z,1509401732.276 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:15:32.276Z,1509401732.276 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-30T22:15:32.276Z,1509401732.276 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:15:32.290Z,1509401732.290 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:15:32.689Z,1509401732.689 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:15:32.689Z,1509401732.689 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-30T22:15:33.053Z,1509401733.053 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:15:33.054Z,1509401733.054 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:15:33.054Z,1509401733.054 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:16:24.668Z,1509401784.668 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T22:11:24.6Z
2017-10-30T22:16:24.668Z,1509401784.668 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T22:16:24.668Z,1509401784.668 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T22:16:28.823Z,1509401788.823 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0032.lzma
2017-10-30T22:16:29.591Z,1509401789.591 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0032.lzma.bak
2017-10-30T22:16:29.591Z,1509401789.591 [DataOverHttps](INFO): SBD MOMSN=5177191
2017-10-30T22:16:33.812Z,1509401793.812 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:16:38.932Z,1509401798.932 [DataOverHttps](INFO): Sending 651 bytes from file Logs/20171030T210256/Express0033.lzma
2017-10-30T22:16:39.732Z,1509401799.732 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0033.lzma.bak
2017-10-30T22:16:39.732Z,1509401799.732 [DataOverHttps](INFO): SBD MOMSN=5177193
2017-10-30T22:16:40.199Z,1509401800.199 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T22:16:40.199Z,1509401800.199 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T22:16:40.199Z,1509401800.199 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T22:16:49.313Z,1509401809.313 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002327
CHAN A1 (24V): -0.003924
CHAN A2 (12V): -0.002368
CHAN A3 (5V): 0.000353
CHAN B0 (3.3V): 0.000160
CHAN B1 (3.15aV): -0.000332
CHAN B2 (3.15bV): -0.000204
CHAN B3 (GND): 0.000311
OPEN: -0.000208
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:17:24.826Z,1509401844.826 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-30T22:17:55.502Z,1509401875.502 [NAL9602](INFO): Powering down
2017-10-30T22:18:19.572Z,1509401899.572 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:18:30.397Z,1509401910.397 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134624
CHAN A1 (24V): -0.003638
CHAN A2 (12V): -0.002176
CHAN A3 (5V): 0.000350
CHAN B0 (3.3V): -0.000261
CHAN B1 (3.15aV): -0.000267
CHAN B2 (3.15bV): -0.000444
CHAN B3 (GND): -0.000166
OPEN: -0.000409
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:18:33.164Z,1509401913.164 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:18:33.164Z,1509401913.164 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-30T22:18:33.164Z,1509401913.164 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:18:33.178Z,1509401913.178 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:18:33.578Z,1509401913.578 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:18:33.578Z,1509401913.578 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-30T22:18:33.949Z,1509401913.949 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:18:33.950Z,1509401913.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:18:33.950Z,1509401913.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:20:00.564Z,1509402000.564 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:20:11.454Z,1509402011.454 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003117
CHAN A1 (24V): -0.003138
CHAN A2 (12V): -0.001945
CHAN A3 (5V): 0.000536
CHAN B0 (3.3V): 0.000091
CHAN B1 (3.15aV): -0.000894
CHAN B2 (3.15bV): 0.000545
CHAN B3 (GND): 0.000017
OPEN: -0.000650
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:20:32.540Z,1509402032.540 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:20:32.540Z,1509402032.540 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:20:32.540Z,1509402032.540 [BPC1](ERROR): Communications Fault
2017-10-30T22:20:32.585Z,1509402032.585 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:20:33.785Z,1509402033.785 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:20:33.786Z,1509402033.786 [BPC1] No Fault, FailCount= 1
2017-10-30T22:21:34.348Z,1509402094.348 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:21:34.348Z,1509402094.348 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-30T22:21:34.348Z,1509402094.348 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:21:34.373Z,1509402094.373 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:21:34.757Z,1509402094.757 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:21:34.757Z,1509402094.757 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-30T22:21:35.141Z,1509402095.141 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:21:35.142Z,1509402095.142 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:21:35.142Z,1509402095.142 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:21:40.775Z,1509402100.775 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T22:21:40.775Z,1509402100.775 [Default:CheckIn:C.Wait] Stopped
2017-10-30T22:21:40.775Z,1509402100.775 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T22:21:40.775Z,1509402100.775 [Default:CheckIn:D] Running Loop=1
2017-10-30T22:21:41.144Z,1509402101.144 [Default:CheckIn:D] Stopped
2017-10-30T22:21:41.144Z,1509402101.144 [Default:CheckIn:E] Running Loop=1
2017-10-30T22:21:41.597Z,1509402101.597 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 75.245036 min 
2017-10-30T22:21:41.597Z,1509402101.597 [Default:CheckIn:E] Stopped
2017-10-30T22:21:41.597Z,1509402101.597 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T22:21:41.598Z,1509402101.598 [Default:CheckIn] Stopped
2017-10-30T22:21:41.598Z,1509402101.598 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T22:21:41.598Z,1509402101.598 [Default:CheckIn](INFO): Running loop #9
2017-10-30T22:21:41.598Z,1509402101.598 [Default:CheckIn] Running Loop=9
2017-10-30T22:21:41.602Z,1509402101.602 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T22:21:41.602Z,1509402101.602 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T22:21:41.622Z,1509402101.622 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:21:45.231Z,1509402105.231 [NAL9602](INFO): Powering up
2017-10-30T22:21:54.755Z,1509402114.755 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135025
CHAN A1 (24V): -0.003670
CHAN A2 (12V): -0.002006
CHAN A3 (5V): -0.000162
CHAN B0 (3.3V): -0.000092
CHAN B1 (3.15aV): -0.000711
CHAN B2 (3.15bV): -0.000458
CHAN B3 (GND): 0.000323
OPEN: -0.000351
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:21:56.267Z,1509402116.267 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:22:28.266Z,1509402148.266 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-30T22:22:28.348Z,1509402148.348 [NAL9602](FAULT): received: 
+CSQ:0

OK94, 2, 0, 0, 0

OK
2017-10-30T22:22:28.349Z,1509402148.349 [NAL9602] Data Fault, FailCount= 5
2017-10-30T22:22:28.349Z,1509402148.349 [NAL9602](ERROR): Data Fault
2017-10-30T22:22:28.481Z,1509402148.481 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T22:22:28.482Z,1509402148.482 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-30T22:22:28.666Z,1509402148.666 [NAL9602](INFO): Powering down
2017-10-30T22:22:28.731Z,1509402148.731 [CommandLine](FAULT): Scheduling is paused
2017-10-30T22:22:28.732Z,1509402148.732 [CBIT](INFO): Critical error at 20171030T222228
2017-10-30T22:22:28.732Z,1509402148.732 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-10-30T22:23:06.656Z,1509402186.656 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T22:23:25.047Z,1509402205.047 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:23:35.877Z,1509402215.877 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003474
CHAN A1 (24V): -0.003644
CHAN A2 (12V): -0.002309
CHAN A3 (5V): -0.000009
CHAN B0 (3.3V): 0.000122
CHAN B1 (3.15aV): 0.000105
CHAN B2 (3.15bV): 0.000052
CHAN B3 (GND): 0.000003
OPEN: -0.000132
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:24:28.401Z,1509402268.401 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T22:24:28.401Z,1509402268.401 [NAL9602] No Fault, FailCount= 5
2017-10-30T22:24:28.748Z,1509402268.748 [NAL9602](INFO): Powering up NAL9602
2017-10-30T22:24:35.179Z,1509402275.179 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:24:35.179Z,1509402275.179 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-30T22:24:35.179Z,1509402275.179 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:24:35.223Z,1509402275.223 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:24:35.224Z,1509402275.224 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:24:39.545Z,1509402279.545 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:24:40.347Z,1509402280.347 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-30T22:24:40.348Z,1509402280.348 [NAL9602] Data Fault, FailCount= 1
2017-10-30T22:24:40.348Z,1509402280.348 [NAL9602](ERROR): Data Fault
2017-10-30T22:24:40.434Z,1509402280.434 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T22:24:40.747Z,1509402280.747 [NAL9602](INFO): Powering down
2017-10-30T22:24:41.629Z,1509402281.629 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T22:24:41.629Z,1509402281.629 [NAL9602] No Fault, FailCount= 1
2017-10-30T22:24:46.054Z,1509402286.054 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:24:46.054Z,1509402286.054 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:24:46.054Z,1509402286.054 [BPC1](ERROR): Communications Fault
2017-10-30T22:24:46.100Z,1509402286.100 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:24:46.978Z,1509402286.978 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:24:46.978Z,1509402286.978 [BPC1] No Fault, FailCount= 1
2017-10-30T22:25:06.225Z,1509402306.225 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:25:10.919Z,1509402310.919 [NAL9602](INFO): Powering up NAL9602
2017-10-30T22:25:17.394Z,1509402317.394 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134859
CHAN A1 (24V): -0.003165
CHAN A2 (12V): -0.002509
CHAN A3 (5V): 0.000177
CHAN B0 (3.3V): -0.000198
CHAN B1 (3.15aV): -0.000084
CHAN B2 (3.15bV): -0.000817
CHAN B3 (GND): -0.000139
OPEN: -0.000223
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:25:22.117Z,1509402322.117 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:26:41.976Z,1509402401.976 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T22:21:41.6Z
2017-10-30T22:26:41.976Z,1509402401.976 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T22:26:41.976Z,1509402401.976 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T22:26:46.549Z,1509402406.549 [DataOverHttps](INFO): Sending 111 bytes from file Logs/20171030T210256/Courier0036.lzma
2017-10-30T22:26:47.304Z,1509402407.304 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0036.lzma.bak
2017-10-30T22:26:47.304Z,1509402407.304 [DataOverHttps](INFO): SBD MOMSN=5177210
2017-10-30T22:26:47.411Z,1509402407.411 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:26:56.806Z,1509402416.806 [DataOverHttps](INFO): Sending 792 bytes from file Logs/20171030T210256/Express0037.lzma
2017-10-30T22:26:57.604Z,1509402417.604 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0037.lzma.bak
2017-10-30T22:26:57.605Z,1509402417.605 [DataOverHttps](INFO): SBD MOMSN=5177213
2017-10-30T22:26:58.100Z,1509402418.100 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T22:26:58.101Z,1509402418.101 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T22:26:58.101Z,1509402418.101 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T22:27:01.666Z,1509402421.666 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-30T22:27:05.897Z,1509402425.897 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002948
CHAN A1 (24V): -0.004159
CHAN A2 (12V): -0.001732
CHAN A3 (5V): 0.000182
CHAN B0 (3.3V): -0.000271
CHAN B1 (3.15aV): -0.000348
CHAN B2 (3.15bV): -0.000061
CHAN B3 (GND): -0.000212
OPEN: -0.000545
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:27:31.835Z,1509402451.835 [NAL9602](INFO): Powering down
2017-10-30T22:28:32.416Z,1509402512.416 [PNI_TCM](ERROR): CRC does not match. Expected:0x45941 got:0x43994
2017-10-30T22:28:36.082Z,1509402516.082 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:28:46.844Z,1509402526.844 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134783
CHAN A1 (24V): -0.003221
CHAN A2 (12V): -0.001829
CHAN A3 (5V): -0.000170
CHAN B0 (3.3V): -0.000174
CHAN B1 (3.15aV): 0.000302
CHAN B2 (3.15bV): -0.000604
CHAN B3 (GND): -0.000225
OPEN: -0.000447
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:30:17.014Z,1509402617.014 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:30:27.791Z,1509402627.791 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003660
CHAN A1 (24V): -0.003682
CHAN A2 (12V): -0.002307
CHAN A3 (5V): 0.000150
CHAN B0 (3.3V): 0.000338
CHAN B1 (3.15aV): -0.000452
CHAN B2 (3.15bV): 0.000225
CHAN B3 (GND): -0.000113
OPEN: -0.000370
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:31:57.927Z,1509402717.927 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:31:58.707Z,1509402718.707 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T22:31:58.707Z,1509402718.707 [Default:CheckIn:C.Wait] Stopped
2017-10-30T22:31:58.707Z,1509402718.707 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T22:31:58.707Z,1509402718.707 [Default:CheckIn:D] Running Loop=1
2017-10-30T22:31:59.112Z,1509402719.112 [Default:CheckIn:D] Stopped
2017-10-30T22:31:59.112Z,1509402719.112 [Default:CheckIn:E] Running Loop=1
2017-10-30T22:31:59.513Z,1509402719.513 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 85.544507 min 
2017-10-30T22:31:59.513Z,1509402719.513 [Default:CheckIn:E] Stopped
2017-10-30T22:31:59.513Z,1509402719.513 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T22:31:59.514Z,1509402719.514 [Default:CheckIn] Stopped
2017-10-30T22:31:59.514Z,1509402719.514 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T22:31:59.514Z,1509402719.514 [Default:CheckIn](INFO): Running loop #10
2017-10-30T22:31:59.514Z,1509402719.514 [Default:CheckIn] Running Loop=10
2017-10-30T22:31:59.514Z,1509402719.514 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T22:31:59.514Z,1509402719.514 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T22:32:03.010Z,1509402723.010 [NAL9602](INFO): Powering up
2017-10-30T22:32:11.085Z,1509402731.085 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134950
CHAN A1 (24V): -0.002826
CHAN A2 (12V): -0.002015
CHAN A3 (5V): 0.000538
CHAN B0 (3.3V): -0.000080
CHAN B1 (3.15aV): -0.000473
CHAN B2 (3.15bV): -0.000166
CHAN B3 (GND): 0.000215
OPEN: -0.000504
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:32:13.815Z,1509402733.815 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:32:45.822Z,1509402765.822 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-30T22:32:45.905Z,1509402765.905 [NAL9602](FAULT): received: 
+CSQ:0

OK94, 2, 0, 0, 0

OK
2017-10-30T22:32:45.905Z,1509402765.905 [NAL9602] Data Fault, FailCount= 2
2017-10-30T22:32:45.905Z,1509402765.905 [NAL9602](ERROR): Data Fault
2017-10-30T22:32:45.998Z,1509402765.998 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T22:32:46.214Z,1509402766.214 [NAL9602](INFO): Powering down
2017-10-30T22:32:47.089Z,1509402767.089 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T22:32:47.089Z,1509402767.089 [NAL9602] No Fault, FailCount= 2
2017-10-30T22:33:06.692Z,1509402786.692 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T22:33:16.231Z,1509402796.231 [NAL9602](INFO): Powering up NAL9602
2017-10-30T22:33:27.416Z,1509402807.416 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:33:41.090Z,1509402821.090 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:33:45.419Z,1509402825.419 [NAL9602](INFO): SBD MO Status=2, MOMSN=3294, MT Status=2, MTMSN=0
2017-10-30T22:33:45.420Z,1509402825.420 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T22:33:51.909Z,1509402831.909 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002666
CHAN A1 (24V): -0.004118
CHAN A2 (12V): -0.001883
CHAN A3 (5V): 0.000536
CHAN B0 (3.3V): -0.000086
CHAN B1 (3.15aV): 0.000033
CHAN B2 (3.15bV): -0.000290
CHAN B3 (GND): -0.000506
OPEN: -0.000476
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:34:35.192Z,1509402875.192 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:34:35.192Z,1509402875.192 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:34:35.192Z,1509402875.192 [BPC1](ERROR): Communications Fault
2017-10-30T22:34:35.252Z,1509402875.252 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:34:36.456Z,1509402876.456 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:34:36.457Z,1509402876.457 [BPC1] No Fault, FailCount= 1
2017-10-30T22:35:22.286Z,1509402922.286 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:35:33.097Z,1509402933.097 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134151
CHAN A1 (24V): -0.004038
CHAN A2 (12V): -0.002662
CHAN A3 (5V): 0.000247
CHAN B0 (3.3V): -0.001001
CHAN B1 (3.15aV): 0.000148
CHAN B2 (3.15bV): -0.000092
CHAN B3 (GND): -0.000053
OPEN: -0.000507
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:36:05.989Z,1509402965.989 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:36:05.989Z,1509402965.989 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:36:05.989Z,1509402965.989 [BPC1](ERROR): Communications Fault
2017-10-30T22:36:06.104Z,1509402966.104 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:36:07.022Z,1509402967.022 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:36:07.022Z,1509402967.022 [BPC1] No Fault, FailCount= 1
2017-10-30T22:36:10.322Z,1509402970.322 [CommandLine](IMPORTANT): got command report
2017-10-30T22:36:14.477Z,1509402974.477 [CommandLine](IMPORTANT): got command show variable ctd_seabird
2017-10-30T22:36:14.532Z,1509402974.532 [CommandLine](IMPORTANT): CTD_Seabird.loadAtStartup (bool)
2017-10-30T22:36:14.532Z,1509402974.532 [CommandLine](IMPORTANT): CTD_Seabird.simulateHardware (bool)
2017-10-30T22:36:14.532Z,1509402974.532 [CommandLine](IMPORTANT): CTD_Seabird.maxPressBound (decibar)
2017-10-30T22:36:14.533Z,1509402974.533 [CommandLine](IMPORTANT): CTD_Seabird.minPressBound (decibar)
2017-10-30T22:36:14.533Z,1509402974.533 [CommandLine](IMPORTANT): CTD_Seabird.maxSalinityBound (practical_salinity_unit)
2017-10-30T22:36:14.533Z,1509402974.533 [CommandLine](IMPORTANT): CTD_Seabird.minSalinityBound (practical_salinity_unit)
2017-10-30T22:36:14.662Z,1509402974.662 [CommandLine](IMPORTANT): CTD_Seabird.loadControl (none)
2017-10-30T22:36:14.667Z,1509402974.667 [CommandLine](IMPORTANT): CTD_Seabird.uart (none)
2017-10-30T22:36:14.667Z,1509402974.667 [CommandLine](IMPORTANT): CTD_Seabird.baud (bit_per_second)
2017-10-30T22:36:14.668Z,1509402974.668 [CommandLine](IMPORTANT): CTD_Seabird.lcmApplication (none)
2017-10-30T22:36:14.713Z,1509402974.713 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_electrical_conductivity (unspecified)
2017-10-30T22:36:14.715Z,1509402974.715 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_temperature (celsius)
2017-10-30T22:36:14.717Z,1509402974.717 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_salinity (practical_salinity_unit)
2017-10-30T22:36:14.717Z,1509402974.717 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_density (kilogram_per_cubic_meter)
2017-10-30T22:36:14.718Z,1509402974.718 [CommandLine](IMPORTANT): CTD_Seabird.depth (meter)
2017-10-30T22:36:14.719Z,1509402974.719 [CommandLine](IMPORTANT): CTD_Seabird.sea_water_pressure (decibar)
2017-10-30T22:36:14.778Z,1509402974.778 [CommandLine](IMPORTANT): CTD_Seabird.durationOfLastRun (second)
2017-10-30T22:36:14.787Z,1509402974.787 [CommandLine](IMPORTANT): CTD_Seabird.component_voltage (volt)
2017-10-30T22:36:14.788Z,1509402974.788 [CommandLine](IMPORTANT): CTD_Seabird.component_avgVoltage (volt)
2017-10-30T22:36:14.788Z,1509402974.788 [CommandLine](IMPORTANT): CTD_Seabird.component_current (milliampere)
2017-10-30T22:36:14.788Z,1509402974.788 [CommandLine](IMPORTANT): CTD_Seabird.component_avgCurrent (milliampere)
2017-10-30T22:36:24.105Z,1509402984.105 [CommandLine](IMPORTANT): got command report touch CTD_Seabird.sea_water_temperature
2017-10-30T22:36:31.043Z,1509402991.043 [CommandLine](IMPORTANT): got command run ./Missions/Insert/Science.xml
2017-10-30T22:36:31.043Z,1509402991.043 [MissionManager](INFO): Loading Mission: ./Missions/Insert/Science.xml
2017-10-30T22:36:31.183Z,1509402991.183 [MissionManager](INFO): DefineArg Science.SampleISUS = 0 bool
2017-10-30T22:36:31.188Z,1509402991.188 [MissionManager](INFO): DefineArg Science.SampleISUSmaxPitch = 60.000000 arcdeg
2017-10-30T22:36:31.192Z,1509402991.192 [MissionManager](INFO): DefineArg Science.SampleISUSminPitch = -60.000000 arcdeg
2017-10-30T22:36:31.196Z,1509402991.196 [MissionManager](INFO): DefineArg Science.PeakDetectChlActive = 0 bool
2017-10-30T22:36:31.201Z,1509402991.201 [MissionManager](INFO): DefineArg Science.HighestChlPeakReportActive = 0 bool
2017-10-30T22:36:31.205Z,1509402991.205 [MissionManager](INFO): DefineArg Science.PatchTracking = 0 bool
2017-10-30T22:36:31.208Z,1509402991.208 [MissionManager](INFO): DefineArg Science.FilterWidthHorizontal = 3.000000 count
2017-10-30T22:36:31.211Z,1509402991.211 [MissionManager](INFO): DefineArg Science.NumProfilesSlidingwindow = 100.000000 count
2017-10-30T22:36:31.214Z,1509402991.214 [MissionManager](INFO): DefineArg Science.PeakDetectNO3Active = 0 bool
2017-10-30T22:36:31.217Z,1509402991.217 [MissionManager](INFO): DefineArg Science.UpwardDerivativeOfTemperatureActive = 0 bool
2017-10-30T22:36:31.220Z,1509402991.220 [MissionManager](INFO): DefineArg Science.EnabledAanderaaO2 = 1.000000 bool
2017-10-30T22:36:31.274Z,1509402991.274 [MissionManager](INFO): DefineArg Science.EnabledNeilBrown = 1.000000 bool
2017-10-30T22:36:31.278Z,1509402991.278 [MissionManager](INFO): DefineArg Science.EnabledSeabird = 1.000000 bool
2017-10-30T22:36:31.282Z,1509402991.282 [MissionManager](INFO): DefineArg Science.EnabledTurbulence_NPS = 0.000000 bool
2017-10-30T22:36:31.298Z,1509402991.298 [MissionManager](INFO): DefineArg Science.EnabledWetLabsBB2FL = 1.000000 bool
2017-10-30T22:36:31.301Z,1509402991.301 [MissionManager](INFO): DefineArg Science.EnabledISUS = 0.000000 bool
2017-10-30T22:36:31.305Z,1509402991.305 [MissionManager](INFO): DefineArg Science.LowPassWindowLength = 20.000000 count
2017-10-30T22:36:31.308Z,1509402991.308 [MissionManager](INFO): DefineArg Science.PeakChlShallowBound = nan m
2017-10-30T22:36:31.362Z,1509402991.362 [MissionManager](INFO): DefineArg Science.PeakChlDeepBound = nan m
2017-10-30T22:36:31.374Z,1509402991.374 [MissionManager](INFO): DefineOutput Science.PeakChl = 0.000000 ug/l
2017-10-30T22:36:31.394Z,1509402991.394 [MissionManager](INFO): DefineOutput Science.PeakChlDepth = 0.000000 m
2017-10-30T22:36:31.410Z,1509402991.410 [MissionManager](INFO): DefineOutput Science.PeakChlLatitude = nan arcdeg
2017-10-30T22:36:31.422Z,1509402991.422 [MissionManager](INFO): DefineOutput Science.PeakChlLongitude = nan arcdeg
2017-10-30T22:36:31.430Z,1509402991.430 [MissionManager](INFO): DefineOutput Science.PeakNO3 = 0.000000 umol/l
2017-10-30T22:36:31.442Z,1509402991.442 [MissionManager](INFO): DefineOutput Science.PeakNO3Depth = 0.000000 m
2017-10-30T22:36:31.454Z,1509402991.454 [MissionManager](INFO): DefineOutput Science.PeakNO3Latitude = nan arcdeg
2017-10-30T22:36:31.457Z,1509402991.457 [MissionManager](INFO): DefineOutput Science.PeakNO3Longitude = nan arcdeg
2017-10-30T22:36:31.465Z,1509402991.465 [MissionManager](INFO): DefineOutput Science.PatchChl = 0.000000 m
2017-10-30T22:36:31.473Z,1509402991.473 [MissionManager](INFO): DefineOutput Science.PatchChlDepth = 0.000000 m
2017-10-30T22:36:31.490Z,1509402991.490 [MissionManager](INFO): DefineOutput Science.PatchChlLatitude = nan arcdeg
2017-10-30T22:36:31.498Z,1509402991.498 [MissionManager](INFO): DefineOutput Science.PatchChlLongitude = nan arcdeg
2017-10-30T22:36:31.503Z,1509402991.503 [MissionManager](INFO): DefineOutput Science.PatchChlDistance = nan arcdeg
2017-10-30T22:36:31.541Z,1509402991.541 [Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2017-10-30T22:36:31.569Z,1509402991.569 [Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal.
2017-10-30T22:36:31.615Z,1509402991.615 [Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2017-10-30T22:36:31.671Z,1509402991.671 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Aggregate xmlns="Tethys"
       xmlns:Derivation="Tethys/Derivation"
       xmlns:Science="Tethys/Science"
       xmlns:Sensor="Tethys/Sensor"
       xmlns:Trigger="Tethys/Trigger"
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Derivation http://okeanids.mbari.org/tethys/Xml/Derivation.xsd
                           Tethys/Science http://okeanids.mbari.org/tethys/Xml/Science.xsd
                           Tethys/Sensor http://okeanids.mbari.org/tethys/Xml/Sensor.xsd
                           Tethys/Trigger http://okeanids.mbari.org/tethys/Xml/Trigger.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Science">

    <DefineArg Name="SampleISUS"><Description>
        Set either this or PeakDetectNO3Active to True in order to sample
        Nitrate. EnabledISUS must also be true.
    </Description><False/></DefineArg>

    <DefineArg Name="SampleISUSmaxPitch"><Description>
        Maximum pitch to sample ISUS. (EnabledISUS must also be true.)
    </Description><Units:degree/><Value>60.0</Value></DefineArg>

    <DefineArg Name="SampleISUSminPitch"><Description>
        Minimum pitch to sample ISUS. (EnabledISUS must also be true.)
    </Description><Units:degree/><Value>-60.0</Value></DefineArg>

    <DefineArg Name="PeakDetectChlActive"><Description>
        Turns on peak detection of Cholorphyll.
    </Description><False/></DefineArg>

    <DefineArg Name="HighestChlPeakReportActive"><Description>
        Turns on reporting of the highest peak value on yo-yo profiles in a
        horizontal sliding window (of length numProfilesSlidingwindow)
    </Description><False/></DefineArg>

    <DefineArg Name="PatchTracking"><Description>
        If tracking a patch
    </Description><False/></DefineArg>

    <DefineArg Name="FilterWidthHorizontal"><Description>
        Width of boxcar filter applied to yoyo-wise chl peaks to pick out the
        highest peak.
    </Description><Units:count/><Value>3</Value></DefineArg>

    <DefineArg Name="NumProfilesSlidingwindow"><Description>
        Length of horizontal sliding window. The highest yoyo-wise chl peak
        (after low-pass filtering by a filter of length FilterWidthHorizontal)
        within this window.
    </Description><Units:count/><Value>100</Value></DefineArg>

    <DefineArg Name="PeakDetectNO3Active"><Description>
        Turns on peak detection of Nitrate (and turns on ISUS).
    </Description><False/></DefineArg>

    <DefineArg Name="UpwardDerivativeOfTemperatureActive"><Description>
        Turns on seawater temperature derivative.
    </Description><False/></DefineArg>

    <DefineArg Name="EnabledAanderaaO2"><Description>
        Automatically set to True if the Aanderaa O2 sensor is installed. Set to
        false to disable reading Aandera O2.
    </Description><Science:Aanderaa_O2.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledNeilBrown"><Description>
        Automatically set to true if the Neil Brown CTD is enabled. Set to false
        to disable reading from the Neil Brown.
    </Description><Science:CTD_NeilBrown.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledSeabird"><Description>
        Automatically set to true if the CTD is enabled. Set to false to disable
        reading from the CTD.
    </Description><Science:CTD_Seabird.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledTurbulence_NPS"><Description>
        Automatically set to true if the NPS Turbulence sensor is enabled. Set
        to false to disable reading from the NPS Turbulence sensor.
    </Description><Science:Turbulence_NPS.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledWetLabsBB2FL"><Description>
        Automatically set to true if the the WetLabs BB2FL is enabled. Set to
        false to disable the WetLabs BB2FL.
    </Description><Science:WetLabsBB2FL.loadAtStartup/></DefineArg>

    <DefineArg Name="EnabledISUS"><Description>
        Automatically set to True if ISUS is enabled. Set to false to disable
        ISUS.
    </Description><Science:ISUS.loadAtStartup/></DefineArg>

<!--
    <DefineArg Name="EnabledSeeStar"><Description>
        Automatically set to True if SeeStar/SCPI is enabled. Set false to
        override.
    </Description><Sensor:SCPI.loadAtStartup/></DefineArg>

    <DefineArg Name="SeeStarTimeout"><Description>
        Timeout to trigger/read trigger for SeeStar camera.
    </Description><Sensor:SCPI.sampleTime/></DefineArg>

    <DefineArg Name="SeeStarTriggerDepth"><Description>
        Trigger the camera above this depth.
    </Description><Units:meter/><Value>40.0</Value></DefineArg>
-->

    <DefineArg Name="LowPassWindowLength"><Description>
        Low-pass window length (based on depth sensor sampling interval 0.4
        second) for low-pass filtering.
    </Description><Units:count/><Value>20</Value></DefineArg>

    <DefineArg Name="PeakChlShallowBound"><Description>
        Shallow depth bound for detecting chl peak on each descent or ascent
        profile.
    </Description><Units:meter/><Value>NaN</Value></DefineArg>

    <DefineArg Name="PeakChlDeepBound"><Description>
        Deep depth bound for detecting chl peak on each descent or ascent
        profile.
    </Description><Units:meter/><Value>NaN</Value></DefineArg>

    <DefineOutput Name="PeakChl"><Units:microgram_per_liter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakChlLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakChlLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakNO3"><Units:micromole_per_liter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Depth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Latitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PeakNO3Longitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChl"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PatchChlDepth"><Units:meter/><Value>0</Value></DefineOutput>

    <DefineOutput Name="PatchChlLatitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChlLongitude"><Units:degree/><Value>NaN</Value></DefineOutput>

    <DefineOutput Name="PatchChlDistance"><Units:degree/><Value>NaN</Value></DefineOutput>

    <Parallel/>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledAanderaaO2"/>
        </While>
        <Universal:mass_concentration_of_oxygen_in_sea_water/>
    </ReadData>

    <ReadData>
        <While>
            <Arg Name="EnabledISUS"/>
            <And><Universal:platform_pitch_angle/><Lt><Arg Name="SampleISUSmaxPitch"/></Lt><And><Universal:platform_pitch_angle/><Gt><Arg Name="SampleISUSminPitch"/></Gt><And><Arg Name="SampleISUS"/><Or><Arg Name="PeakDetectNO3Active"/></Or></And></And></And>
        </While>
        <Universal:mole_concentration_of_nitrate_in_sea_water/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledNeilBrown"/>
            <Or><Arg Name="EnabledSeabird"/></Or>
        </While>
        <Universal:sea_water_temperature/>
        <Universal:sea_water_salinity/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledSeabird"/>
        </While>
        <Science:CTD_Seabird.sea_water_temperature/>
        <Science:CTD_Seabird.sea_water_salinity/>
    </ReadData>
    
    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledNeilBrown"/>
            <Or><Arg Name="EnabledSeabird"/></Or>
            <And><Arg Name="UpwardDerivativeOfTemperatureActive"/></And>
        </While>
        <Universal:upward_derivative_of_sea_water_temperature/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledTurbulence_NPS"/>
        </While>
        <Science:Turbulence_NPS.MicroCond/>
    </ReadData>

    <ReadData Strategy="MinError">
        <While>
            <Arg Name="EnabledWetLabsBB2FL"/>
            <Or><Arg Name="PeakDetectChlActive"/></Or>
        </While>
        <Universal:mass_concentration_of_chlorophyll_in_sea_water/>
    </ReadData>

    <Aggregate  Id="PeakDetectChl">

        <While>
            <Arg Name="PeakDetectChlActive"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mass_concentration_of_chlorophyll_in_sea_water/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.windowLength/><Arg Name="LowPassWindowLength"/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.shallowBound/><Arg Name="PeakChlShallowBound"/></Setting>
            <Setting><Trigger:PeakDetectVsDepth.deepBound/><Arg Name="PeakChlDeepBound"/></Setting>
            <OutputArg Name="PeakChl"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakChlDepth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakChlLatitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakChlLongitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakChl"/><Arg Name="PeakChlDepth"/>
        </SendData>

    </Aggregate>

    <Aggregate Id="HighestChlPeakReport">

        <While>
            <Arg Name="HighestChlPeakReportActive"/>
        </While>

        <Trigger:PeakDetectHorizontal>
            <Sequence/>
            <Setting><Trigger:PeakDetectHorizontal.detectFrom/><Arg Name="PeakChl"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.depthFrom/><Arg Name="PeakChlDepth"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.latitudeFrom/><Arg Name="PeakChlLatitude"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.longitudeFrom/><Arg Name="PeakChlLongitude"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.patchTracking/><Arg Name="PatchTracking"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.filterWidth/><Arg Name="FilterWidthHorizontal"/></Setting>
            <Setting><Trigger:PeakDetectHorizontal.numProfilesSlidingwindow/><Arg Name="NumProfilesSlidingwindow"/></Setting>
            <OutputArg Name="PatchChl"><Trigger:PeakDetectHorizontal.peakDetect/></OutputArg>
            <OutputArg Name="PatchChlDepth"><Trigger:PeakDetectHorizontal.peakDepth/></OutputArg>
            <OutputArg Name="PatchChlLatitude"><Trigger:PeakDetectHorizontal.peakLatitude/></OutputArg>
            <OutputArg Name="PatchChlLongitude"><Trigger:PeakDetectHorizontal.peakLongitude/></OutputArg>
            <OutputArg Name="PatchChlDistance"><Trigger:PeakDetectHorizontal.peakDistance/></OutputArg>
        </Trigger:PeakDetectHorizontal>

    </Aggregate>

    <Aggregate Id="PeakDetectNO3">

        <While>
            <Arg Name="PeakDetectNO3Active"/>
        </While>

        <Trigger:PeakDetectVsDepth>
            <Sequence/>
            <Setting><Trigger:PeakDetectVsDepth.detect/><Universal:mole_concentration_of_nitrate_in_sea_water/></Setting>
            <OutputArg Name="PeakNO3"><Trigger:PeakDetectVsDepth.peakDetect/></OutputArg>
            <OutputArg Name="PeakNO3Depth"><Trigger:PeakDetectVsDepth.peakDepth/></OutputArg>
            <OutputArg Name="PeakNO3Latitude"><Trigger:PeakDetectVsDepth.peakLatitude/></OutputArg>
            <OutputArg Name="PeakNO3Longitude"><Trigger:PeakDetectVsDepth.peakLongitude/></OutputArg>
        </Trigger:PeakDetectVsDepth>

        <SendData Service="Express"><Arg Name="PeakNO3"/><Arg Name="PeakNO3Depth"/>
        </SendData>

    </Aggregate>

<!--
    <Aggregate Id="RollSeeStar">

        <Description>
            Turn on the SeeStar/SCPI camera.
        </Description>

        <When>
            <Arg Name="EnabledSeeStar"/>
            <And><Universal:depth/><Lt><Arg Name="SeeStarTriggerDepth"/></Lt></And>
        </When>

        <ReadDatum Id="TriggerSeeStar">
            <Timeout Duration="SeeStarTimeout"/>
            <Sensor:SCPI.sampleSCPI/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Arg Name="SeeStarTimeout"/></Setting>
        </Guidance:Wait>

    </Aggregate>
-->

</Aggregate>


2017-10-30T22:36:31.682Z,1509402991.682 [CommandLine](IMPORTANT): Running ./Missions/Insert/Science.xml
2017-10-30T22:36:31.771Z,1509402991.771 [Default] Stopped
2017-10-30T22:36:31.771Z,1509402991.771 [Default](DEBUG): Aggregate::uninitialize Default
2017-10-30T22:36:31.771Z,1509402991.771 [Default:B.GoToSurface] Stopped
2017-10-30T22:36:31.772Z,1509402991.772 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-10-30T22:36:31.772Z,1509402991.772 [Default:CheckIn] Stopped
2017-10-30T22:36:31.772Z,1509402991.772 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T22:36:31.772Z,1509402991.772 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T22:36:31.772Z,1509402991.772 [MissionManager](IMPORTANT): Started mission Science
2017-10-30T22:36:31.772Z,1509402991.772 [Science] Running Loop=1
2017-10-30T22:36:31.772Z,1509402991.772 [Science](DEBUG): Aggregate::initialize Science
2017-10-30T22:36:31.772Z,1509402991.772 [Science:A] Running Loop=1
2017-10-30T22:36:31.772Z,1509402991.772 [Science:B] Running Loop=1
2017-10-30T22:36:31.772Z,1509402991.772 [Science:C] Running Loop=1
2017-10-30T22:36:31.773Z,1509402991.773 [Science:D] Running Loop=1
2017-10-30T22:36:31.773Z,1509402991.773 [Science:E] Running Loop=1
2017-10-30T22:36:31.773Z,1509402991.773 [Science:F] Running Loop=1
2017-10-30T22:36:31.773Z,1509402991.773 [Science:G] Running Loop=1
2017-10-30T22:36:31.773Z,1509402991.773 [Science:PeakDetectChl] Running Loop=1
2017-10-30T22:36:31.773Z,1509402991.773 [Science:PeakDetectChl](DEBUG): Aggregate::initialize Science:PeakDetectChl
2017-10-30T22:36:31.773Z,1509402991.773 [Science:PeakDetectChl:A.PeakDetectVsDepth] Running Loop=1
2017-10-30T22:36:31.773Z,1509402991.773 [Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Initialize.
2017-10-30T22:36:31.780Z,1509402991.780 [Science:HighestChlPeakReport] Running Loop=1
2017-10-30T22:36:31.780Z,1509402991.780 [Science:HighestChlPeakReport](DEBUG): Aggregate::initialize Science:HighestChlPeakReport
2017-10-30T22:36:31.780Z,1509402991.780 [Science:HighestChlPeakReport:A.PeakDetectHorizontal] Running Loop=1
2017-10-30T22:36:31.780Z,1509402991.780 [Science:HighestChlPeakReport:A.PeakDetectHorizontal](INFO): Initialize.
2017-10-30T22:36:31.781Z,1509402991.781 [Science:PeakDetectNO3] Running Loop=1
2017-10-30T22:36:31.781Z,1509402991.781 [Science:PeakDetectNO3](DEBUG): Aggregate::initialize Science:PeakDetectNO3
2017-10-30T22:36:31.781Z,1509402991.781 [Science:PeakDetectNO3:A.PeakDetectVsDepth] Running Loop=1
2017-10-30T22:36:31.781Z,1509402991.781 [Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Initialize.
2017-10-30T22:36:31.784Z,1509402991.784 [Science:PeakDetectNO3] Stopped
2017-10-30T22:36:31.784Z,1509402991.784 [Science:PeakDetectNO3](DEBUG): Aggregate::uninitialize Science:PeakDetectNO3
2017-10-30T22:36:31.784Z,1509402991.784 [Science:PeakDetectNO3:A.PeakDetectVsDepth] Stopped
2017-10-30T22:36:31.784Z,1509402991.784 [Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2017-10-30T22:36:31.784Z,1509402991.784 [Science:HighestChlPeakReport] Stopped
2017-10-30T22:36:31.784Z,1509402991.784 [Science:HighestChlPeakReport](DEBUG): Aggregate::uninitialize Science:HighestChlPeakReport
2017-10-30T22:36:31.784Z,1509402991.784 [Science:HighestChlPeakReport:A.PeakDetectHorizontal] Stopped
2017-10-30T22:36:31.784Z,1509402991.784 [Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Uninitialize.
2017-10-30T22:36:31.784Z,1509402991.784 [Science:PeakDetectChl] Stopped
2017-10-30T22:36:31.785Z,1509402991.785 [Science:PeakDetectChl](DEBUG): Aggregate::uninitialize Science:PeakDetectChl
2017-10-30T22:36:31.785Z,1509402991.785 [Science:PeakDetectChl:A.PeakDetectVsDepth] Stopped
2017-10-30T22:36:31.785Z,1509402991.785 [Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2017-10-30T22:36:31.785Z,1509402991.785 [Science:G] Running Loop=1
2017-10-30T22:36:31.785Z,1509402991.785 [Science:G](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_chlorophyll_in_sea_water
2017-10-30T22:36:31.799Z,1509402991.799 [Science:F] Stopped
2017-10-30T22:36:31.799Z,1509402991.799 [Science:E] Stopped
2017-10-30T22:36:31.799Z,1509402991.799 [Science:D] Running Loop=1
2017-10-30T22:36:31.800Z,1509402991.800 [Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_temperature
2017-10-30T22:36:31.801Z,1509402991.801 [Science:D](DEBUG): Initialize ReadDataComponent to sense CTD_Seabird.sea_water_salinity
2017-10-30T22:36:31.804Z,1509402991.804 [Science:C] Running Loop=1
2017-10-30T22:36:31.805Z,1509402991.805 [Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_temperature
2017-10-30T22:36:31.805Z,1509402991.805 [Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_salinity
2017-10-30T22:36:31.807Z,1509402991.807 [Science:B] Stopped
2017-10-30T22:36:31.807Z,1509402991.807 [Science:A] Running Loop=1
2017-10-30T22:36:31.808Z,1509402991.808 [Science:A](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_oxygen_in_sea_water
2017-10-30T22:36:31.863Z,1509402991.863 [CTD_Seabird](INFO): Initializing
2017-10-30T22:36:31.863Z,1509402991.863 [CTD_Seabird](INFO): Checking LCM
2017-10-30T22:36:31.987Z,1509402991.987 [CTD_NeilBrown](DEBUG): Initializing CTD_NeilBrown.
2017-10-30T22:36:31.995Z,1509402991.995 [CTD_NeilBrown](INFO): Opening uart, block timeout 10ths=4
2017-10-30T22:36:32.121Z,1509402992.121 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:32.203Z,1509402992.203 [WetLabsBB2FL](INFO): Opening uart, block timeout 10ths=4
2017-10-30T22:36:32.203Z,1509402992.203 [WetLabsBB2FL](INFO): Powering up
2017-10-30T22:36:32.535Z,1509402992.535 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:32.705Z,1509402992.705 [CTD_Seabird](INFO): LCM OK
2017-10-30T22:36:32.705Z,1509402992.705 [CTD_Seabird](INFO): Powering up
2017-10-30T22:36:32.944Z,1509402992.944 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:33.348Z,1509402993.348 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:33.470Z,1509402993.470 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.057400 psu
2017-10-30T22:36:33.477Z,1509402993.477 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:33.669Z,1509402993.669 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.060300 psu
2017-10-30T22:36:33.673Z,1509402993.673 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:33.874Z,1509402993.874 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.062500 psu
2017-10-30T22:36:33.878Z,1509402993.878 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:34.082Z,1509402994.082 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.063700 psu
2017-10-30T22:36:34.086Z,1509402994.086 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:34.282Z,1509402994.282 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.059200 psu
2017-10-30T22:36:34.286Z,1509402994.286 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:34.479Z,1509402994.479 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071900 psu
2017-10-30T22:36:34.483Z,1509402994.483 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:34.683Z,1509402994.683 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070400 psu
2017-10-30T22:36:34.687Z,1509402994.687 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:34.884Z,1509402994.884 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074500 psu
2017-10-30T22:36:34.887Z,1509402994.887 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:34.951Z,1509402994.951 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:35.088Z,1509402995.088 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.068800 psu
2017-10-30T22:36:35.092Z,1509402995.092 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:35.300Z,1509402995.300 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.067800 psu
2017-10-30T22:36:35.304Z,1509402995.304 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:35.501Z,1509402995.501 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070300 psu
2017-10-30T22:36:35.505Z,1509402995.505 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:35.705Z,1509402995.705 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071300 psu
2017-10-30T22:36:35.738Z,1509402995.738 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:35.910Z,1509402995.910 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072400 psu
2017-10-30T22:36:35.914Z,1509402995.914 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:36.107Z,1509402996.107 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075500 psu
2017-10-30T22:36:36.127Z,1509402996.127 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:36.318Z,1509402996.318 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072000 psu
2017-10-30T22:36:36.322Z,1509402996.322 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:36.528Z,1509402996.528 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078500 psu
2017-10-30T22:36:36.532Z,1509402996.532 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:36.721Z,1509402996.721 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074200 psu
2017-10-30T22:36:36.728Z,1509402996.728 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:36.923Z,1509402996.923 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072100 psu
2017-10-30T22:36:36.937Z,1509402996.937 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:37.127Z,1509402997.127 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076900 psu
2017-10-30T22:36:37.164Z,1509402997.164 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:37.301Z,1509402997.301 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-10-30T22:36:37.328Z,1509402997.328 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071100 psu
2017-10-30T22:36:37.333Z,1509402997.333 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:37.492Z,1509402997.492 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2017-10-30T22:36:37.528Z,1509402997.528 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.079000 psu
2017-10-30T22:36:37.533Z,1509402997.533 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:37.730Z,1509402997.730 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071200 psu
2017-10-30T22:36:37.736Z,1509402997.736 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:37.940Z,1509402997.940 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073400 psu
2017-10-30T22:36:37.945Z,1509402997.945 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:38.141Z,1509402998.141 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074700 psu
2017-10-30T22:36:38.147Z,1509402998.147 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:38.345Z,1509402998.345 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071700 psu
2017-10-30T22:36:38.350Z,1509402998.350 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:38.353Z,1509402998.353 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2017-10-30T22:36:38.549Z,1509402998.549 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078800 psu
2017-10-30T22:36:38.556Z,1509402998.556 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:38.746Z,1509402998.746 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074700 psu
2017-10-30T22:36:38.755Z,1509402998.755 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:38.952Z,1509402998.952 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077600 psu
2017-10-30T22:36:38.978Z,1509402998.978 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:39.154Z,1509402999.154 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078200 psu
2017-10-30T22:36:39.163Z,1509402999.163 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:39.368Z,1509402999.368 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073400 psu
2017-10-30T22:36:39.380Z,1509402999.380 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:39.563Z,1509402999.563 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072300 psu
2017-10-30T22:36:39.572Z,1509402999.572 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:39.712Z,1509402999.712 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	241		220.933		78.717		20.576		31.031		31.031		39.705		8.674		402.7		650.2		78.6	



2017-10-30T22:36:39.712Z,1509402999.712 [Aanderaa_O2](DEBUG): Error parsing device response
2017-10-30T22:36:39.764Z,1509402999.764 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.069800 psu
2017-10-30T22:36:39.780Z,1509402999.780 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:40.072Z,1509403000.072 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072400 psu
2017-10-30T22:36:40.078Z,1509403000.078 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:40.266Z,1509403000.266 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071900 psu
2017-10-30T22:36:40.276Z,1509403000.276 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:40.347Z,1509403000.347 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:40.469Z,1509403000.469 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074300 psu
2017-10-30T22:36:40.477Z,1509403000.477 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:40.676Z,1509403000.676 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074300 psu
2017-10-30T22:36:40.683Z,1509403000.683 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:40.885Z,1509403000.885 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075500 psu
2017-10-30T22:36:40.894Z,1509403000.894 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:40.913Z,1509403000.913 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	241		221.028		78.751		20.576		31.025		31.025		39.700		8.674		402.4		649.4		78.6	


2017-10-30T22:36:40.913Z,1509403000.913 [Aanderaa_O2](DEBUG): Error parsing device response
2017-10-30T22:36:41.078Z,1509403001.078 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075400 psu
2017-10-30T22:36:41.084Z,1509403001.084 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:41.153Z,1509403001.153 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:41.286Z,1509403001.286 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074800 psu
2017-10-30T22:36:41.294Z,1509403001.294 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:41.494Z,1509403001.494 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.080500 psu
2017-10-30T22:36:41.500Z,1509403001.500 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:41.698Z,1509403001.698 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071700 psu
2017-10-30T22:36:41.706Z,1509403001.706 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:41.715Z,1509403001.715 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	241		220.800		78.670		20.576		31.038		31.038		39.707		8.670		402.4		648.6		78.6	



2017-10-30T22:36:41.715Z,1509403001.715 [Aanderaa_O2](DEBUG): Error parsing device response
2017-10-30T22:36:41.899Z,1509403001.899 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072300 psu
2017-10-30T22:36:41.905Z,1509403001.905 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:42.099Z,1509403002.099 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077200 psu
2017-10-30T22:36:42.105Z,1509403002.105 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:42.307Z,1509403002.307 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072300 psu
2017-10-30T22:36:42.317Z,1509403002.317 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:42.503Z,1509403002.503 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076600 psu
2017-10-30T22:36:42.530Z,1509403002.530 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:42.714Z,1509403002.714 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071300 psu
2017-10-30T22:36:42.723Z,1509403002.723 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:42.924Z,1509403002.924 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071100 psu
2017-10-30T22:36:42.937Z,1509403002.937 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:43.113Z,1509403003.113 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073100 psu
2017-10-30T22:36:43.119Z,1509403003.119 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:43.322Z,1509403003.322 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077500 psu
2017-10-30T22:36:43.375Z,1509403003.375 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:43.521Z,1509403003.521 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071600 psu
2017-10-30T22:36:43.527Z,1509403003.527 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:43.722Z,1509403003.722 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076800 psu
2017-10-30T22:36:43.861Z,1509403003.861 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:43.927Z,1509403003.927 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073000 psu
2017-10-30T22:36:43.933Z,1509403003.933 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:44.126Z,1509403004.126 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074500 psu
2017-10-30T22:36:44.137Z,1509403004.137 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:44.334Z,1509403004.334 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071600 psu
2017-10-30T22:36:44.340Z,1509403004.340 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:44.532Z,1509403004.532 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072800 psu
2017-10-30T22:36:44.541Z,1509403004.541 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:44.737Z,1509403004.737 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.065300 psu
2017-10-30T22:36:44.760Z,1509403004.760 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:44.943Z,1509403004.943 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078400 psu
2017-10-30T22:36:44.950Z,1509403004.950 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:45.144Z,1509403005.144 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073900 psu
2017-10-30T22:36:45.150Z,1509403005.150 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:45.346Z,1509403005.346 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071000 psu
2017-10-30T22:36:45.380Z,1509403005.380 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:45.552Z,1509403005.552 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071300 psu
2017-10-30T22:36:45.566Z,1509403005.566 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:45.749Z,1509403005.749 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.069500 psu
2017-10-30T22:36:45.803Z,1509403005.803 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:45.884Z,1509403005.884 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:45.957Z,1509403005.957 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072500 psu
2017-10-30T22:36:45.978Z,1509403005.978 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:46.159Z,1509403006.159 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071400 psu
2017-10-30T22:36:46.177Z,1509403006.177 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:46.371Z,1509403006.371 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072500 psu
2017-10-30T22:36:46.377Z,1509403006.377 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:46.666Z,1509403006.666 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073900 psu
2017-10-30T22:36:46.672Z,1509403006.672 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:46.866Z,1509403006.866 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078500 psu
2017-10-30T22:36:46.872Z,1509403006.872 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:47.075Z,1509403007.075 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078300 psu
2017-10-30T22:36:47.081Z,1509403007.081 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:47.275Z,1509403007.275 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.079600 psu
2017-10-30T22:36:47.281Z,1509403007.281 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:47.484Z,1509403007.484 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077300 psu
2017-10-30T22:36:47.490Z,1509403007.490 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:47.680Z,1509403007.680 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074700 psu
2017-10-30T22:36:47.686Z,1509403007.686 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:47.892Z,1509403007.892 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072000 psu
2017-10-30T22:36:47.898Z,1509403007.898 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:48.084Z,1509403008.084 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070300 psu
2017-10-30T22:36:48.091Z,1509403008.091 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:48.289Z,1509403008.289 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.082000 psu
2017-10-30T22:36:48.295Z,1509403008.295 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:48.493Z,1509403008.493 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073500 psu
2017-10-30T22:36:48.499Z,1509403008.499 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:48.698Z,1509403008.698 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074000 psu
2017-10-30T22:36:48.707Z,1509403008.707 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:48.902Z,1509403008.902 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070700 psu
2017-10-30T22:36:48.908Z,1509403008.908 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:49.105Z,1509403009.105 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072500 psu
2017-10-30T22:36:49.113Z,1509403009.113 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:49.306Z,1509403009.306 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072000 psu
2017-10-30T22:36:49.338Z,1509403009.338 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:49.515Z,1509403009.515 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078200 psu
2017-10-30T22:36:49.522Z,1509403009.522 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:49.715Z,1509403009.715 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072200 psu
2017-10-30T22:36:49.731Z,1509403009.731 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:49.915Z,1509403009.915 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070800 psu
2017-10-30T22:36:49.926Z,1509403009.926 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:50.126Z,1509403010.126 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070200 psu
2017-10-30T22:36:50.156Z,1509403010.156 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:50.328Z,1509403010.328 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.068500 psu
2017-10-30T22:36:50.334Z,1509403010.334 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:50.529Z,1509403010.529 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070200 psu
2017-10-30T22:36:50.535Z,1509403010.535 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:50.732Z,1509403010.732 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076200 psu
2017-10-30T22:36:50.738Z,1509403010.738 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:50.937Z,1509403010.937 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070600 psu
2017-10-30T22:36:50.943Z,1509403010.943 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:51.133Z,1509403011.133 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077800 psu
2017-10-30T22:36:51.139Z,1509403011.139 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:51.338Z,1509403011.338 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073500 psu
2017-10-30T22:36:51.344Z,1509403011.344 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:51.546Z,1509403011.546 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078400 psu
2017-10-30T22:36:51.551Z,1509403011.551 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:51.756Z,1509403011.756 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.079300 psu
2017-10-30T22:36:51.764Z,1509403011.764 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:51.955Z,1509403011.955 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075900 psu
2017-10-30T22:36:51.961Z,1509403011.961 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:52.151Z,1509403012.151 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073300 psu
2017-10-30T22:36:52.188Z,1509403012.188 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:52.360Z,1509403012.360 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077600 psu
2017-10-30T22:36:52.393Z,1509403012.393 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:52.559Z,1509403012.559 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076100 psu
2017-10-30T22:36:52.565Z,1509403012.565 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:52.760Z,1509403012.760 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073100 psu
2017-10-30T22:36:52.766Z,1509403012.766 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:52.960Z,1509403012.960 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074800 psu
2017-10-30T22:36:52.969Z,1509403012.969 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:53.164Z,1509403013.164 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.068700 psu
2017-10-30T22:36:53.170Z,1509403013.170 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:53.248Z,1509403013.248 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:36:53.429Z,1509403013.429 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.121301 degC
2017-10-30T22:36:53.473Z,1509403013.473 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071600 psu
2017-10-30T22:36:53.479Z,1509403013.479 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:53.676Z,1509403013.676 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.064100 psu
2017-10-30T22:36:53.686Z,1509403013.686 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:53.874Z,1509403013.874 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076100 psu
2017-10-30T22:36:53.883Z,1509403013.883 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:54.074Z,1509403014.074 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075100 psu
2017-10-30T22:36:54.082Z,1509403014.082 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:54.276Z,1509403014.276 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077400 psu
2017-10-30T22:36:54.290Z,1509403014.290 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:54.358Z,1509403014.358 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:54.448Z,1509403014.448 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:36:54.483Z,1509403014.483 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072600 psu
2017-10-30T22:36:54.490Z,1509403014.490 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:54.623Z,1509403014.623 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.122003 degC
2017-10-30T22:36:54.683Z,1509403014.683 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.069800 psu
2017-10-30T22:36:54.698Z,1509403014.698 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:54.895Z,1509403014.895 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.067700 psu
2017-10-30T22:36:54.906Z,1509403014.906 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:55.088Z,1509403015.088 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070500 psu
2017-10-30T22:36:55.106Z,1509403015.106 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:55.171Z,1509403015.171 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:55.298Z,1509403015.298 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070500 psu
2017-10-30T22:36:55.327Z,1509403015.327 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:55.501Z,1509403015.501 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074800 psu
2017-10-30T22:36:55.510Z,1509403015.510 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:55.648Z,1509403015.648 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031104 psu
2017-10-30T22:36:55.702Z,1509403015.702 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075500 psu
2017-10-30T22:36:55.729Z,1509403015.729 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:55.835Z,1509403015.835 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.121698 degC
2017-10-30T22:36:55.906Z,1509403015.906 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073200 psu
2017-10-30T22:36:55.913Z,1509403015.913 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:56.109Z,1509403016.109 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.069600 psu
2017-10-30T22:36:56.133Z,1509403016.133 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:56.244Z,1509403016.244 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:36:56.283Z,1509403016.283 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.121790 degC
2017-10-30T22:36:56.317Z,1509403016.317 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070800 psu
2017-10-30T22:36:56.322Z,1509403016.322 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:56.522Z,1509403016.522 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076200 psu
2017-10-30T22:36:56.528Z,1509403016.528 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:56.714Z,1509403016.714 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078000 psu
2017-10-30T22:36:56.722Z,1509403016.722 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:56.927Z,1509403016.927 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071500 psu
2017-10-30T22:36:56.935Z,1509403016.935 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:57.123Z,1509403017.123 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072000 psu
2017-10-30T22:36:57.131Z,1509403017.131 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:57.327Z,1509403017.327 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072300 psu
2017-10-30T22:36:57.349Z,1509403017.349 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:57.444Z,1509403017.444 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:36:57.531Z,1509403017.531 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074200 psu
2017-10-30T22:36:57.538Z,1509403017.538 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:57.740Z,1509403017.740 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.069600 psu
2017-10-30T22:36:57.747Z,1509403017.747 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:57.856Z,1509403017.856 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.121606 degC
2017-10-30T22:36:57.932Z,1509403017.932 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074000 psu
2017-10-30T22:36:57.938Z,1509403017.938 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:58.007Z,1509403018.007 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:36:58.138Z,1509403018.138 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071700 psu
2017-10-30T22:36:58.145Z,1509403018.145 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:58.340Z,1509403018.340 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076800 psu
2017-10-30T22:36:58.347Z,1509403018.347 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:58.549Z,1509403018.549 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072900 psu
2017-10-30T22:36:58.555Z,1509403018.555 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:58.642Z,1509403018.642 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:36:58.644Z,1509403018.644 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.121393 degC
2017-10-30T22:36:58.746Z,1509403018.746 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070700 psu
2017-10-30T22:36:58.752Z,1509403018.752 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:58.951Z,1509403018.951 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074000 psu
2017-10-30T22:36:58.955Z,1509403018.955 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:59.162Z,1509403019.162 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071200 psu
2017-10-30T22:36:59.168Z,1509403019.168 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:59.245Z,1509403019.245 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:36:59.358Z,1509403019.358 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075700 psu
2017-10-30T22:36:59.364Z,1509403019.364 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:59.439Z,1509403019.439 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.121515 degC
2017-10-30T22:36:59.558Z,1509403019.558 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072000 psu
2017-10-30T22:36:59.564Z,1509403019.564 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:36:59.771Z,1509403019.771 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074200 psu
2017-10-30T22:36:59.775Z,1509403019.775 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:00.071Z,1509403020.071 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075500 psu
2017-10-30T22:37:00.080Z,1509403020.080 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:00.276Z,1509403020.276 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073800 psu
2017-10-30T22:37:00.282Z,1509403020.282 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:00.447Z,1509403020.447 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:37:00.480Z,1509403020.480 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075200 psu
2017-10-30T22:37:00.486Z,1509403020.486 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:00.622Z,1509403020.622 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.120691 degC
2017-10-30T22:37:00.680Z,1509403020.680 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071200 psu
2017-10-30T22:37:00.685Z,1509403020.685 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:00.881Z,1509403020.881 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077100 psu
2017-10-30T22:37:00.887Z,1509403020.887 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:01.081Z,1509403021.081 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070900 psu
2017-10-30T22:37:01.087Z,1509403021.087 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:01.245Z,1509403021.245 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:37:01.293Z,1509403021.293 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.069700 psu
2017-10-30T22:37:01.299Z,1509403021.299 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:01.493Z,1509403021.493 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071700 psu
2017-10-30T22:37:01.499Z,1509403021.499 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:01.694Z,1509403021.694 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071700 psu
2017-10-30T22:37:01.700Z,1509403021.700 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:01.898Z,1509403021.898 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072300 psu
2017-10-30T22:37:01.904Z,1509403021.904 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:02.095Z,1509403022.095 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075500 psu
2017-10-30T22:37:02.103Z,1509403022.103 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:02.170Z,1509403022.170 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:37:02.307Z,1509403022.307 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072200 psu
2017-10-30T22:37:02.313Z,1509403022.313 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:02.448Z,1509403022.448 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:37:02.511Z,1509403022.511 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070800 psu
2017-10-30T22:37:02.516Z,1509403022.516 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:02.711Z,1509403022.711 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072600 psu
2017-10-30T22:37:02.716Z,1509403022.716 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:02.912Z,1509403022.912 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073500 psu
2017-10-30T22:37:02.917Z,1509403022.917 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:03.112Z,1509403023.112 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075900 psu
2017-10-30T22:37:03.120Z,1509403023.120 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:03.324Z,1509403023.324 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070800 psu
2017-10-30T22:37:03.331Z,1509403023.331 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:03.525Z,1509403023.525 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074800 psu
2017-10-30T22:37:03.528Z,1509403023.528 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:03.649Z,1509403023.649 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:37:03.721Z,1509403023.721 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077100 psu
2017-10-30T22:37:03.725Z,1509403023.725 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:03.925Z,1509403023.925 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074300 psu
2017-10-30T22:37:03.931Z,1509403023.931 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:04.138Z,1509403024.138 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.075900 psu
2017-10-30T22:37:04.143Z,1509403024.143 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:04.245Z,1509403024.245 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:37:04.334Z,1509403024.334 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070800 psu
2017-10-30T22:37:04.340Z,1509403024.340 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:04.534Z,1509403024.534 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.069300 psu
2017-10-30T22:37:04.540Z,1509403024.540 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:04.747Z,1509403024.747 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076000 psu
2017-10-30T22:37:04.767Z,1509403024.767 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:04.944Z,1509403024.944 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072200 psu
2017-10-30T22:37:04.948Z,1509403024.948 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:05.152Z,1509403025.152 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.070600 psu
2017-10-30T22:37:05.157Z,1509403025.157 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:05.351Z,1509403025.351 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.074900 psu
2017-10-30T22:37:05.355Z,1509403025.355 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:05.449Z,1509403025.449 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:37:05.548Z,1509403025.548 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071000 psu
2017-10-30T22:37:05.555Z,1509403025.555 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:05.627Z,1509403025.627 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:37:05.761Z,1509403025.761 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.080900 psu
2017-10-30T22:37:05.770Z,1509403025.770 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:05.965Z,1509403025.965 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.072300 psu
2017-10-30T22:37:05.971Z,1509403025.971 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:06.003Z,1509403026.003 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:37:06.005Z,1509403026.005 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.121301 degC
2017-10-30T22:37:06.157Z,1509403026.157 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.076400 psu
2017-10-30T22:37:06.158Z,1509403026.158 [CTD_NeilBrown](INFO): Ground Fault scan is active; will mark data as invalid.
2017-10-30T22:37:06.166Z,1509403026.166 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:06.229Z,1509403026.229 [CTD_NeilBrown](DEBUG): serial timeout
2017-10-30T22:37:06.245Z,1509403026.245 [CTD_Seabird](ERROR): Salinity reading out of range: 0.031153 psu
2017-10-30T22:37:06.245Z,1509403026.245 [CTD_Seabird](INFO): Ground Fault scan is active; will mark data as invalid.
2017-10-30T22:37:06.361Z,1509403026.361 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.073900 psu
2017-10-30T22:37:06.362Z,1509403026.362 [CTD_NeilBrown](INFO): Ground Fault scan is active; will mark data as invalid.
2017-10-30T22:37:06.368Z,1509403026.368 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:06.540Z,1509403026.540 [Reporter](INFO): CTD_Seabird.sea_water_temperature 19.121912 degC
2017-10-30T22:37:06.570Z,1509403026.570 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.071300 psu
2017-10-30T22:37:06.570Z,1509403026.570 [CTD_NeilBrown](INFO): Ground Fault scan is active; will mark data as invalid.
2017-10-30T22:37:06.576Z,1509403026.576 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:06.866Z,1509403026.866 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077700 psu
2017-10-30T22:37:06.867Z,1509403026.867 [CTD_NeilBrown](INFO): Ground Fault scan is active; will mark data as invalid.
2017-10-30T22:37:06.875Z,1509403026.875 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:07.070Z,1509403027.070 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.078300 psu
2017-10-30T22:37:07.071Z,1509403027.071 [CTD_NeilBrown](INFO): Ground Fault scan is active; will mark data as invalid.
2017-10-30T22:37:07.076Z,1509403027.076 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:07.195Z,1509403027.195 [CommandLine](IMPORTANT): got command stop
2017-10-30T22:37:07.196Z,1509403027.196 [CommandLine](IMPORTANT): Scheduling is paused
2017-10-30T22:37:07.196Z,1509403027.196 [Supervisor](INFO): Stop Mission called by CommandLine::commandStop
2017-10-30T22:37:07.275Z,1509403027.275 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.077000 psu
2017-10-30T22:37:07.276Z,1509403027.276 [CTD_NeilBrown](INFO): Ground Fault scan is active; will mark data as invalid.
2017-10-30T22:37:07.282Z,1509403027.282 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:07.356Z,1509403027.356 [MissionManager](INFO): MissionManager is completed.
2017-10-30T22:37:07.356Z,1509403027.356 [MissionManager](INFO): Uninitializing Mission Science
2017-10-30T22:37:07.356Z,1509403027.356 [Science] Stopped
2017-10-30T22:37:07.356Z,1509403027.356 [Science](DEBUG): Aggregate::uninitialize Science
2017-10-30T22:37:07.356Z,1509403027.356 [Science:A] Stopped
2017-10-30T22:37:07.356Z,1509403027.356 [Science:C] Stopped
2017-10-30T22:37:07.356Z,1509403027.356 [Science:D] Stopped
2017-10-30T22:37:07.356Z,1509403027.356 [Science:G] Stopped
2017-10-30T22:37:07.483Z,1509403027.483 [CTD_NeilBrown](ERROR): Salinity reading out of range: -0.068700 psu
2017-10-30T22:37:07.484Z,1509403027.484 [CTD_NeilBrown](INFO): Ground Fault scan is active; will mark data as invalid.
2017-10-30T22:37:07.493Z,1509403027.493 [CTD_NeilBrown](INFO): some bad data, not updating bins
2017-10-30T22:37:07.560Z,1509403027.560 [WetLabsBB2FL](INFO): Powering down
2017-10-30T22:37:07.714Z,1509403027.714 [MissionManager](IMPORTANT): Started mission Default
2017-10-30T22:37:07.714Z,1509403027.714 [Default] Running Loop=1
2017-10-30T22:37:07.714Z,1509403027.714 [Default](DEBUG): Aggregate::initialize Default
2017-10-30T22:37:07.714Z,1509403027.714 [Default:B.GoToSurface] Running Loop=1
2017-10-30T22:37:07.714Z,1509403027.714 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-10-30T22:37:07.731Z,1509403027.731 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-10-30T22:37:07.731Z,1509403027.731 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-10-30T22:37:07.732Z,1509403027.732 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-10-30T22:37:07.732Z,1509403027.732 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-10-30T22:37:07.732Z,1509403027.732 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-10-30T22:37:07.733Z,1509403027.733 [Default:A.Wait] Running Loop=1
2017-10-30T22:37:07.733Z,1509403027.733 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-10-30T22:37:07.968Z,1509403027.968 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-10-30T22:37:07.968Z,1509403027.968 [CTD_Seabird](INFO): Powering down
2017-10-30T22:37:08.131Z,1509403028.131 [Aanderaa_O2](INFO): Powering down
2017-10-30T22:37:10.064Z,1509403030.064 [PNI_TCM](ERROR): CRC does not match. Expected:0x11368 got:0x49330
2017-10-30T22:37:13.253Z,1509403033.253 [PNI_TCM](ERROR): CRC does not match. Expected:0x43144 got:0x32519
2017-10-30T22:37:14.852Z,1509403034.852 [PNI_TCM](ERROR): CRC does not match. Expected:0x25288 got:0x10781
2017-10-30T22:37:16.824Z,1509403036.824 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-30T22:37:16.918Z,1509403036.918 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.001942
CHAN A1 (24V): -0.004073
CHAN A2 (12V): -0.002432
CHAN A3 (5V): 0.000347
CHAN B0 (3.3V): -0.000080
CHAN B1 (3.15aV): -0.000292
CHAN B2 (3.15bV): -0.000587
CHAN B3 (GND): 0.000208
OPEN: -0.000447
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:37:20.878Z,1509403040.878 [Default:A.Wait](INFO): Done Waiting.
2017-10-30T22:37:20.878Z,1509403040.878 [Default:A.Wait] Stopped
2017-10-30T22:37:20.878Z,1509403040.878 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T22:37:21.270Z,1509403041.270 [Default:CheckIn] Running Loop=1
2017-10-30T22:37:21.270Z,1509403041.270 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T22:37:21.270Z,1509403041.270 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T22:37:22.860Z,1509403042.860 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-30T22:37:22.860Z,1509403042.860 [NAL9602] Data Fault, FailCount= 3
2017-10-30T22:37:22.860Z,1509403042.860 [NAL9602](ERROR): Data Fault
2017-10-30T22:37:22.939Z,1509403042.939 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T22:37:23.233Z,1509403043.233 [NAL9602](INFO): Powering down
2017-10-30T22:37:24.094Z,1509403044.094 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T22:37:24.094Z,1509403044.094 [NAL9602] No Fault, FailCount= 3
2017-10-30T22:37:26.056Z,1509403046.056 [PNI_TCM](ERROR): CRC does not match. Expected:0x44456 got:0x6978
2017-10-30T22:37:29.246Z,1509403049.246 [PNI_TCM](ERROR): CRC does not match. Expected:0x8675 got:0x64025
2017-10-30T22:37:29.667Z,1509403049.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x47805 got:0x44317
2017-10-30T22:37:34.053Z,1509403054.053 [PNI_TCM](ERROR): CRC does not match. Expected:0x35263 got:0x43481
2017-10-30T22:37:35.655Z,1509403055.655 [PNI_TCM](ERROR): CRC does not match. Expected:0x32560 got:0x8732
2017-10-30T22:37:37.261Z,1509403057.261 [PNI_TCM](ERROR): CRC does not match. Expected:0x60397 got:0x28476
2017-10-30T22:37:44.043Z,1509403064.043 [PNI_TCM](ERROR): CRC does not match. Expected:0x25742 got:0x24661
2017-10-30T22:37:50.053Z,1509403070.053 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-30T22:37:51.659Z,1509403071.659 [PNI_TCM](ERROR): CRC does not match. Expected:0x16822 got:0x43805
2017-10-30T22:37:53.252Z,1509403073.252 [PNI_TCM](ERROR): CRC does not match. Expected:0x3998 got:0x1857
2017-10-30T22:37:53.625Z,1509403073.625 [NAL9602](INFO): Powering up NAL9602
2017-10-30T22:37:56.457Z,1509403076.457 [PNI_TCM](ERROR): CRC does not match. Expected:0x22764 got:0x34587
2017-10-30T22:37:58.055Z,1509403078.055 [PNI_TCM](ERROR): CRC does not match. Expected:0x14277 got:0x49066
2017-10-30T22:38:01.266Z,1509403081.266 [PNI_TCM](ERROR): CRC does not match. Expected:0x36909 got:0x6978
2017-10-30T22:38:04.955Z,1509403084.955 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:38:17.798Z,1509403097.798 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T22:38:17.798Z,1509403097.798 [BPC1] Data Fault, FailCount= 1
2017-10-30T22:38:17.798Z,1509403097.798 [BPC1](ERROR): Data Fault
2017-10-30T22:38:17.842Z,1509403097.842 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T22:38:19.030Z,1509403099.030 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:38:19.030Z,1509403099.030 [BPC1] No Fault, FailCount= 1
2017-10-30T22:38:47.073Z,1509403127.073 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:38:57.843Z,1509403137.843 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134357
CHAN A1 (24V): -0.003618
CHAN A2 (12V): -0.002244
CHAN A3 (5V): 0.000435
CHAN B0 (3.3V): -0.000413
CHAN B1 (3.15aV): -0.000143
CHAN B2 (3.15bV): -0.000151
CHAN B3 (GND): 0.000396
OPEN: -0.000409
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:39:06.848Z,1509403146.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-30T22:39:07.250Z,1509403147.250 [PNI_TCM](ERROR): CRC does not match. Expected:0x21083 got:0x48668
2017-10-30T22:39:12.441Z,1509403152.441 [PNI_TCM](ERROR): CRC does not match. Expected:0x2429 got:0x24318
2017-10-30T22:39:16.455Z,1509403156.455 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-30T22:39:18.054Z,1509403158.054 [PNI_TCM](ERROR): CRC does not match. Expected:0x10298 got:0x109
2017-10-30T22:39:21.260Z,1509403161.260 [PNI_TCM](ERROR): CRC does not match. Expected:0x36186 got:0x16817
2017-10-30T22:39:22.871Z,1509403162.871 [PNI_TCM](ERROR): CRC does not match. Expected:0x46889 got:0x796
2017-10-30T22:39:30.849Z,1509403170.849 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-30T22:39:31.255Z,1509403171.255 [PNI_TCM](ERROR): CRC does not match. Expected:0x8286 got:0x7360
2017-10-30T22:39:32.465Z,1509403172.465 [PNI_TCM](ERROR): CRC does not match. Expected:0x32911 got:0x16817
2017-10-30T22:39:35.290Z,1509403175.290 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:39:35.290Z,1509403175.290 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-30T22:39:35.684Z,1509403175.684 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:39:35.685Z,1509403175.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:39:35.685Z,1509403175.685 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:39:36.463Z,1509403176.463 [PNI_TCM](ERROR): CRC does not match. Expected:0x45201 got:0x122
2017-10-30T22:39:43.652Z,1509403183.652 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-30T22:39:44.061Z,1509403184.061 [PNI_TCM](ERROR): CRC does not match. Expected:0x51258 got:0x1857
2017-10-30T22:39:45.653Z,1509403185.653 [PNI_TCM](ERROR): CRC does not match. Expected:0x43444 got:0x3484
2017-10-30T22:39:46.860Z,1509403186.860 [PNI_TCM](ERROR): CRC does not match. Expected:0x29995 got:0x49066
2017-10-30T22:39:56.457Z,1509403196.457 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-30T22:40:28.073Z,1509403228.073 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:40:38.883Z,1509403238.883 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.005043
CHAN A1 (24V): -0.003733
CHAN A2 (12V): -0.001547
CHAN A3 (5V): 0.000151
CHAN B0 (3.3V): 0.000275
CHAN B1 (3.15aV): -0.000652
CHAN B2 (3.15bV): -0.000043
CHAN B3 (GND): -0.000439
OPEN: -0.000736
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:40:53.206Z,1509403253.206 [NAL9602](INFO): GPS fix at 20171030T224051: (36.802702, -121.788068)
2017-10-30T22:40:53.260Z,1509403253.260 [DeadReckonWithRespectToSeafloor](INFO): Failure count cleared after critical for DeadReckonWithRespectToSeafloor
2017-10-30T22:40:53.263Z,1509403253.263 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T22:40:53.267Z,1509403253.267 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T22:40:57.922Z,1509403257.922 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20171030T210256/Courier0040.lzma
2017-10-30T22:40:58.722Z,1509403258.722 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0040.lzma.bak
2017-10-30T22:40:58.722Z,1509403258.722 [DataOverHttps](INFO): SBD MOMSN=5177233
2017-10-30T22:41:07.889Z,1509403267.889 [DataOverHttps](INFO): Sending 1333 bytes from file Logs/20171030T210256/Express0041.lzma
2017-10-30T22:41:08.634Z,1509403268.634 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0041.lzma.bak
2017-10-30T22:41:08.634Z,1509403268.634 [DataOverHttps](INFO): SBD MOMSN=5177236
2017-10-30T22:41:09.101Z,1509403269.101 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T22:41:09.101Z,1509403269.101 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T22:41:09.101Z,1509403269.101 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T22:41:28.176Z,1509403288.176 [NAL9602](INFO): Powering down
2017-10-30T22:41:41.798Z,1509403301.798 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T22:41:41.798Z,1509403301.798 [BPC1] Data Fault, FailCount= 1
2017-10-30T22:41:41.798Z,1509403301.798 [BPC1](ERROR): Data Fault
2017-10-30T22:41:41.862Z,1509403301.862 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T22:41:43.054Z,1509403303.054 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:41:43.054Z,1509403303.054 [BPC1] No Fault, FailCount= 1
2017-10-30T22:42:09.030Z,1509403329.030 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:42:22.456Z,1509403342.456 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134845
CHAN A1 (24V): -0.003379
CHAN A2 (12V): -0.001798
CHAN A3 (5V): 0.000609
CHAN B0 (3.3V): -0.000107
CHAN B1 (3.15aV): -0.000240
CHAN B2 (3.15bV): -0.000410
CHAN B3 (GND): -0.000004
OPEN: -0.000330
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:42:25.226Z,1509403345.226 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T22:42:25.226Z,1509403345.226 [BPC1] Data Fault, FailCount= 1
2017-10-30T22:42:25.226Z,1509403345.226 [BPC1](ERROR): Data Fault
2017-10-30T22:42:25.280Z,1509403345.280 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T22:42:26.459Z,1509403346.459 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:42:26.459Z,1509403346.459 [BPC1] No Fault, FailCount= 1
2017-10-30T22:42:36.032Z,1509403356.032 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:42:36.032Z,1509403356.032 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-30T22:42:36.032Z,1509403356.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:42:36.072Z,1509403356.072 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:42:36.481Z,1509403356.481 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:42:36.481Z,1509403356.481 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-30T22:42:36.836Z,1509403356.836 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:42:36.836Z,1509403356.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:42:36.837Z,1509403356.837 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:43:06.891Z,1509403386.891 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T22:43:52.647Z,1509403432.647 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:44:03.471Z,1509403443.471 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004712
CHAN A1 (24V): -0.003103
CHAN A2 (12V): -0.002051
CHAN A3 (5V): 0.000310
CHAN B0 (3.3V): 0.000058
CHAN B1 (3.15aV): -0.000025
CHAN B2 (3.15bV): -0.000113
CHAN B3 (GND): 0.000497
OPEN: -0.000715
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:44:22.822Z,1509403462.822 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:44:22.822Z,1509403462.822 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:44:22.822Z,1509403462.822 [BPC1](ERROR): Communications Fault
2017-10-30T22:44:22.866Z,1509403462.866 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:44:24.073Z,1509403464.073 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:44:24.073Z,1509403464.073 [BPC1] No Fault, FailCount= 1
2017-10-30T22:45:18.065Z,1509403518.065 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-30T22:45:19.666Z,1509403519.666 [PNI_TCM](ERROR): CRC does not match. Expected:0x30485 got:0x40426
2017-10-30T22:45:30.867Z,1509403530.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-30T22:45:33.695Z,1509403533.695 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:45:36.905Z,1509403536.905 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:45:36.905Z,1509403536.905 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-30T22:45:36.905Z,1509403536.905 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:45:36.919Z,1509403536.919 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:45:37.289Z,1509403537.289 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:45:37.289Z,1509403537.289 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-30T22:45:37.683Z,1509403537.683 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:45:37.683Z,1509403537.683 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:45:37.684Z,1509403537.684 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:45:38.869Z,1509403538.869 [PNI_TCM](ERROR): CRC does not match. Expected:0x51678 got:0x7360
2017-10-30T22:45:44.536Z,1509403544.536 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135148
CHAN A1 (24V): -0.003176
CHAN A2 (12V): -0.002073
CHAN A3 (5V): 0.000239
CHAN B0 (3.3V): 0.000229
CHAN B1 (3.15aV): 0.000052
CHAN B2 (3.15bV): 0.000096
CHAN B3 (GND): 0.000720
OPEN: -0.000629
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:46:04.464Z,1509403564.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x24823 got:0x49067
2017-10-30T22:46:09.694Z,1509403569.694 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T22:46:09.694Z,1509403569.694 [Default:CheckIn:C.Wait] Stopped
2017-10-30T22:46:09.694Z,1509403569.694 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T22:46:09.694Z,1509403569.694 [Default:CheckIn:D] Running Loop=1
2017-10-30T22:46:10.118Z,1509403570.118 [Default:CheckIn:D] Stopped
2017-10-30T22:46:10.118Z,1509403570.118 [Default:CheckIn:E] Running Loop=1
2017-10-30T22:46:10.493Z,1509403570.493 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 9.040071 min 
2017-10-30T22:46:10.494Z,1509403570.494 [Default:CheckIn:E] Stopped
2017-10-30T22:46:10.494Z,1509403570.494 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T22:46:10.494Z,1509403570.494 [Default:CheckIn] Stopped
2017-10-30T22:46:10.494Z,1509403570.494 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T22:46:10.494Z,1509403570.494 [Default:CheckIn](INFO): Running loop #2
2017-10-30T22:46:10.494Z,1509403570.494 [Default:CheckIn] Running Loop=2
2017-10-30T22:46:10.494Z,1509403570.494 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T22:46:10.494Z,1509403570.494 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T22:46:13.908Z,1509403573.908 [NAL9602](INFO): Powering up
2017-10-30T22:46:25.082Z,1509403585.082 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:47:01.517Z,1509403621.517 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:47:01.517Z,1509403621.517 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:47:01.517Z,1509403621.517 [BPC1](ERROR): Communications Fault
2017-10-30T22:47:01.577Z,1509403621.577 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:47:02.741Z,1509403622.741 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:47:02.741Z,1509403622.741 [BPC1] No Fault, FailCount= 1
2017-10-30T22:47:14.552Z,1509403634.552 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:47:25.329Z,1509403645.329 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004791
CHAN A1 (24V): -0.004136
CHAN A2 (12V): -0.002491
CHAN A3 (5V): -0.000042
CHAN B0 (3.3V): -0.000348
CHAN B1 (3.15aV): -0.000208
CHAN B2 (3.15bV): -0.000369
CHAN B3 (GND): 0.000753
OPEN: -0.000404
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:48:28.298Z,1509403708.298 [NAL9602](INFO): SBD MO Status=2, MOMSN=3294, MT Status=2, MTMSN=0
2017-10-30T22:48:28.298Z,1509403708.298 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T22:48:37.897Z,1509403717.897 [NAL9602](INFO): SBD MO Status=0, MOMSN=3294, MT Status=0, MTMSN=0
2017-10-30T22:48:37.897Z,1509403717.897 [NAL9602](INFO): No messages in MT queue
2017-10-30T22:48:37.994Z,1509403717.994 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:48:37.994Z,1509403717.994 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-30T22:48:37.994Z,1509403717.994 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:48:38.008Z,1509403718.008 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:48:38.360Z,1509403718.360 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:48:38.360Z,1509403718.360 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-30T22:48:38.756Z,1509403718.756 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:48:38.756Z,1509403718.756 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:48:38.757Z,1509403718.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:48:55.571Z,1509403735.571 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:49:06.366Z,1509403746.366 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003016
CHAN A1 (24V): -0.003456
CHAN A2 (12V): -0.002060
CHAN A3 (5V): -0.000323
CHAN B0 (3.3V): -0.000010
CHAN B1 (3.15aV): -0.000688
CHAN B2 (3.15bV): 0.000040
CHAN B3 (GND): -0.000392
OPEN: -0.000579
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:50:36.791Z,1509403836.791 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:50:47.588Z,1509403847.588 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003345
CHAN A1 (24V): -0.003779
CHAN A2 (12V): -0.001995
CHAN A3 (5V): 0.000267
CHAN B0 (3.3V): -0.000283
CHAN B1 (3.15aV): -0.000070
CHAN B2 (3.15bV): 0.000002
CHAN B3 (GND): 0.000552
OPEN: -0.000365
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:51:10.750Z,1509403870.750 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T22:46:10.5Z
2017-10-30T22:51:10.750Z,1509403870.750 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T22:51:10.751Z,1509403870.751 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T22:51:14.999Z,1509403874.999 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0044.lzma
2017-10-30T22:51:15.766Z,1509403875.766 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0044.lzma.bak
2017-10-30T22:51:15.766Z,1509403875.766 [DataOverHttps](INFO): SBD MOMSN=5177340
2017-10-30T22:51:25.125Z,1509403885.125 [DataOverHttps](INFO): Sending 557 bytes from file Logs/20171030T210256/Express0045.lzma
2017-10-30T22:51:25.883Z,1509403885.883 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0045.lzma.bak
2017-10-30T22:51:25.883Z,1509403885.883 [DataOverHttps](INFO): SBD MOMSN=5177342
2017-10-30T22:51:26.345Z,1509403886.345 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T22:51:26.345Z,1509403886.345 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T22:51:26.345Z,1509403886.345 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T22:51:39.065Z,1509403899.065 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:51:39.065Z,1509403899.065 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-30T22:51:39.065Z,1509403899.065 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:51:39.106Z,1509403899.106 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:51:39.455Z,1509403899.455 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:51:39.455Z,1509403899.455 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-30T22:51:39.841Z,1509403899.841 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:51:39.846Z,1509403899.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:51:39.846Z,1509403899.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:51:45.392Z,1509403905.392 [NAL9602](INFO): Powering down
2017-10-30T22:52:17.876Z,1509403937.876 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:52:30.645Z,1509403950.645 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002955
CHAN A1 (24V): -0.003186
CHAN A2 (12V): -0.002012
CHAN A3 (5V): -0.000045
CHAN B0 (3.3V): -0.000478
CHAN B1 (3.15aV): -0.000349
CHAN B2 (3.15bV): -0.000651
CHAN B3 (GND): 0.000088
OPEN: -0.000671
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:53:07.036Z,1509403987.036 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T22:54:00.827Z,1509404040.827 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:54:11.628Z,1509404051.628 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135154
CHAN A1 (24V): -0.003633
CHAN A2 (12V): -0.002497
CHAN A3 (5V): 0.000223
CHAN B0 (3.3V): -0.000384
CHAN B1 (3.15aV): -0.000010
CHAN B2 (3.15bV): 0.000010
CHAN B3 (GND): 0.000333
OPEN: -0.000509
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:54:17.998Z,1509404057.998 [BPC1](ERROR): Failed to receive battery data
2017-10-30T22:54:17.998Z,1509404057.998 [BPC1] Communications Fault, FailCount= 1
2017-10-30T22:54:17.998Z,1509404057.998 [BPC1](ERROR): Communications Fault
2017-10-30T22:54:18.060Z,1509404058.060 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T22:54:19.254Z,1509404059.254 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T22:54:19.254Z,1509404059.254 [BPC1] No Fault, FailCount= 1
2017-10-30T22:54:39.919Z,1509404079.919 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:54:39.920Z,1509404079.920 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-30T22:54:39.920Z,1509404079.920 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:54:39.974Z,1509404079.974 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:54:40.306Z,1509404080.306 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:54:40.306Z,1509404080.306 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-30T22:54:40.674Z,1509404080.674 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:54:40.675Z,1509404080.675 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:54:40.675Z,1509404080.675 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:55:41.869Z,1509404141.869 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:55:52.701Z,1509404152.701 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003899
CHAN A1 (24V): -0.003541
CHAN A2 (12V): -0.002348
CHAN A3 (5V): -0.000198
CHAN B0 (3.3V): 0.000152
CHAN B1 (3.15aV): -0.000205
CHAN B2 (3.15bV): -0.000964
CHAN B3 (GND): 0.000159
OPEN: -0.000420
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:56:27.074Z,1509404187.074 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T22:56:27.075Z,1509404187.075 [Default:CheckIn:C.Wait] Stopped
2017-10-30T22:56:27.075Z,1509404187.075 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T22:56:27.075Z,1509404187.075 [Default:CheckIn:D] Running Loop=1
2017-10-30T22:56:27.468Z,1509404187.468 [Default:CheckIn:D] Stopped
2017-10-30T22:56:27.469Z,1509404187.469 [Default:CheckIn:E] Running Loop=1
2017-10-30T22:56:27.870Z,1509404187.870 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 19.329240 min 
2017-10-30T22:56:27.871Z,1509404187.871 [Default:CheckIn:E] Stopped
2017-10-30T22:56:27.871Z,1509404187.871 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T22:56:27.871Z,1509404187.871 [Default:CheckIn] Stopped
2017-10-30T22:56:27.871Z,1509404187.871 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T22:56:27.871Z,1509404187.871 [Default:CheckIn](INFO): Running loop #3
2017-10-30T22:56:27.871Z,1509404187.871 [Default:CheckIn] Running Loop=3
2017-10-30T22:56:27.871Z,1509404187.871 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T22:56:27.872Z,1509404187.872 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T22:56:31.490Z,1509404191.490 [NAL9602](INFO): Powering up
2017-10-30T22:56:42.390Z,1509404202.390 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:56:43.187Z,1509404203.187 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-30T22:56:43.187Z,1509404203.187 [NAL9602] Data Fault, FailCount= 1
2017-10-30T22:56:43.187Z,1509404203.187 [NAL9602](ERROR): Data Fault
2017-10-30T22:56:43.287Z,1509404203.287 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T22:56:43.593Z,1509404203.593 [NAL9602](INFO): Powering down
2017-10-30T22:56:44.485Z,1509404204.485 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T22:56:44.485Z,1509404204.485 [NAL9602] No Fault, FailCount= 1
2017-10-30T22:57:13.987Z,1509404233.987 [NAL9602](INFO): Powering up NAL9602
2017-10-30T22:57:22.856Z,1509404242.856 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:57:24.793Z,1509404244.793 [NAL9602](INFO): NAL9602 initialized
2017-10-30T22:57:36.034Z,1509404256.034 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002721
CHAN A1 (24V): -0.003482
CHAN A2 (12V): -0.001803
CHAN A3 (5V): 0.000109
CHAN B0 (3.3V): 0.000232
CHAN B1 (3.15aV): 0.000361
CHAN B2 (3.15bV): -0.000337
CHAN B3 (GND): 0.000037
OPEN: -0.000226
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:57:40.807Z,1509404260.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T22:57:40.807Z,1509404260.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-30T22:57:40.807Z,1509404260.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T22:57:40.837Z,1509404260.837 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T22:57:41.244Z,1509404261.244 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T22:57:41.244Z,1509404261.244 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-30T22:57:41.594Z,1509404261.594 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T22:57:41.594Z,1509404261.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T22:57:41.594Z,1509404261.594 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T22:58:21.155Z,1509404301.155 [NAL9602](INFO): SBD MO Status=2, MOMSN=3295, MT Status=2, MTMSN=0
2017-10-30T22:58:21.155Z,1509404301.155 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T22:58:46.988Z,1509404326.988 [NAL9602](INFO): SBD MO Status=2, MOMSN=3295, MT Status=2, MTMSN=0
2017-10-30T22:58:46.988Z,1509404326.988 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T22:59:06.257Z,1509404346.257 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T22:59:17.073Z,1509404357.073 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134833
CHAN A1 (24V): -0.003830
CHAN A2 (12V): -0.002400
CHAN A3 (5V): 0.000283
CHAN B0 (3.3V): 0.000344
CHAN B1 (3.15aV): 0.000042
CHAN B2 (3.15bV): -0.000045
CHAN B3 (GND): 0.000127
OPEN: -0.000345
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T22:59:22.592Z,1509404362.592 [NAL9602](INFO): SBD MO Status=2, MOMSN=3295, MT Status=2, MTMSN=0
2017-10-30T22:59:22.592Z,1509404362.592 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T22:59:55.560Z,1509404395.560 [NAL9602](INFO): SBD MO Status=0, MOMSN=3295, MT Status=0, MTMSN=0
2017-10-30T22:59:55.560Z,1509404395.560 [NAL9602](INFO): No messages in MT queue
2017-10-30T23:00:41.780Z,1509404441.780 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:00:41.780Z,1509404441.780 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-30T23:00:41.780Z,1509404441.780 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:00:41.793Z,1509404441.793 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:00:42.227Z,1509404442.227 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:00:42.227Z,1509404442.227 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-30T23:00:42.579Z,1509404442.579 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:00:42.580Z,1509404442.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:00:42.581Z,1509404442.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:00:47.409Z,1509404447.409 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:00:58.234Z,1509404458.234 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003423
CHAN A1 (24V): -0.003891
CHAN A2 (12V): -0.002085
CHAN A3 (5V): 0.000171
CHAN B0 (3.3V): 0.000346
CHAN B1 (3.15aV): -0.000569
CHAN B2 (3.15bV): -0.000517
CHAN B3 (GND): -0.000162
OPEN: -0.000448
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:01:28.206Z,1509404488.206 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T22:56:27.9Z
2017-10-30T23:01:28.206Z,1509404488.206 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T23:01:28.207Z,1509404488.207 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T23:01:32.944Z,1509404492.944 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0048.lzma
2017-10-30T23:01:33.700Z,1509404493.700 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0048.lzma.bak
2017-10-30T23:01:33.700Z,1509404493.700 [DataOverHttps](INFO): SBD MOMSN=5177391
2017-10-30T23:01:42.944Z,1509404502.944 [DataOverHttps](INFO): Sending 596 bytes from file Logs/20171030T210256/Express0049.lzma
2017-10-30T23:01:43.688Z,1509404503.688 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0049.lzma.bak
2017-10-30T23:01:43.688Z,1509404503.688 [DataOverHttps](INFO): SBD MOMSN=5177393
2017-10-30T23:01:44.164Z,1509404504.164 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T23:01:44.164Z,1509404504.164 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T23:01:44.164Z,1509404504.164 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T23:02:03.303Z,1509404523.303 [NAL9602](INFO): Powering down
2017-10-30T23:02:14.486Z,1509404534.486 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:02:28.563Z,1509404548.563 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:02:39.410Z,1509404559.410 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134836
CHAN A1 (24V): -0.003483
CHAN A2 (12V): -0.002023
CHAN A3 (5V): 0.000206
CHAN B0 (3.3V): 0.000217
CHAN B1 (3.15aV): 0.000083
CHAN B2 (3.15bV): 0.000104
CHAN B3 (GND): -0.000224
OPEN: -0.000348
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:03:07.353Z,1509404587.353 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T23:03:14.497Z,1509404594.497 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:03:42.944Z,1509404622.944 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:03:42.944Z,1509404622.944 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-30T23:03:42.944Z,1509404622.944 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:03:42.970Z,1509404622.970 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:03:43.390Z,1509404623.390 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:03:43.390Z,1509404623.390 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-30T23:03:43.738Z,1509404623.738 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:03:43.738Z,1509404623.738 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:03:43.739Z,1509404623.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:04:09.747Z,1509404649.747 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:04:15.293Z,1509404655.293 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:04:20.572Z,1509404660.572 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003741
CHAN A1 (24V): -0.003535
CHAN A2 (12V): -0.002135
CHAN A3 (5V): 0.000494
CHAN B0 (3.3V): 0.000254
CHAN B1 (3.15aV): 0.000027
CHAN B2 (3.15bV): -0.000819
CHAN B3 (GND): 0.000024
OPEN: -0.000470
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:04:44.087Z,1509404684.087 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.400040
2017-10-30T23:05:15.688Z,1509404715.688 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:05:50.948Z,1509404750.948 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:06:01.775Z,1509404761.775 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135439
CHAN A1 (24V): -0.002821
CHAN A2 (12V): -0.002148
CHAN A3 (5V): -0.000144
CHAN B0 (3.3V): 0.000164
CHAN B1 (3.15aV): 0.000140
CHAN B2 (3.15bV): -0.000016
CHAN B3 (GND): 0.000373
OPEN: -0.000064
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:06:16.089Z,1509404776.089 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:06:44.153Z,1509404804.153 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:06:44.153Z,1509404804.153 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-30T23:06:44.153Z,1509404804.153 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:06:44.187Z,1509404804.187 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:06:44.580Z,1509404804.580 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:06:44.580Z,1509404804.580 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-30T23:06:44.932Z,1509404804.932 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:06:44.933Z,1509404804.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:06:44.933Z,1509404804.933 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:06:44.935Z,1509404804.935 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T23:06:44.936Z,1509404804.936 [Default:CheckIn:C.Wait] Stopped
2017-10-30T23:06:44.936Z,1509404804.936 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T23:06:44.936Z,1509404804.936 [Default:CheckIn:D] Running Loop=1
2017-10-30T23:06:45.376Z,1509404805.376 [Default:CheckIn:D] Stopped
2017-10-30T23:06:45.376Z,1509404805.376 [Default:CheckIn:E] Running Loop=1
2017-10-30T23:06:45.748Z,1509404805.748 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 29.627708 min 
2017-10-30T23:06:45.749Z,1509404805.749 [Default:CheckIn:E] Stopped
2017-10-30T23:06:45.749Z,1509404805.749 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T23:06:45.749Z,1509404805.749 [Default:CheckIn] Stopped
2017-10-30T23:06:45.749Z,1509404805.749 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T23:06:45.749Z,1509404805.749 [Default:CheckIn](INFO): Running loop #4
2017-10-30T23:06:45.749Z,1509404805.749 [Default:CheckIn] Running Loop=4
2017-10-30T23:06:45.749Z,1509404805.749 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T23:06:45.750Z,1509404805.750 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T23:06:46.500Z,1509404806.500 [NAL9602](INFO): Powering up
2017-10-30T23:06:57.698Z,1509404817.698 [NAL9602](INFO): NAL9602 initialized
2017-10-30T23:07:16.488Z,1509404836.488 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:07:31.787Z,1509404851.787 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:07:33.700Z,1509404853.700 [NAL9602](INFO): SBD MO Status=2, MOMSN=3296, MT Status=2, MTMSN=0
2017-10-30T23:07:33.701Z,1509404853.701 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:07:42.593Z,1509404862.593 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003403
CHAN A1 (24V): -0.003598
CHAN A2 (12V): -0.002121
CHAN A3 (5V): 0.000239
CHAN B0 (3.3V): 0.000279
CHAN B1 (3.15aV): -0.000490
CHAN B2 (3.15bV): -0.001002
CHAN B3 (GND): 0.000002
OPEN: -0.000588
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:07:46.501Z,1509404866.501 [NAL9602](INFO): SBD MO Status=2, MOMSN=3296, MT Status=2, MTMSN=0
2017-10-30T23:07:46.501Z,1509404866.501 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:08:16.486Z,1509404896.486 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:09:12.630Z,1509404952.630 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:09:16.890Z,1509404956.890 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:09:23.384Z,1509404963.384 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133894
CHAN A1 (24V): -0.004368
CHAN A2 (12V): -0.002015
CHAN A3 (5V): 0.000120
CHAN B0 (3.3V): 0.000347
CHAN B1 (3.15aV): -0.000364
CHAN B2 (3.15bV): -0.000220
CHAN B3 (GND): -0.000254
OPEN: -0.000489
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:09:32.124Z,1509404972.124 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T23:09:32.124Z,1509404972.124 [BPC1] Data Fault, FailCount= 1
2017-10-30T23:09:32.124Z,1509404972.124 [BPC1](ERROR): Data Fault
2017-10-30T23:09:32.180Z,1509404972.180 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:09:33.356Z,1509404973.356 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:09:33.356Z,1509404973.356 [BPC1] No Fault, FailCount= 1
2017-10-30T23:09:37.319Z,1509404977.319 [PNI_TCM](ERROR): CRC does not match. Expected:0x4574 got:0x46363
2017-10-30T23:09:44.946Z,1509404984.946 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:09:44.946Z,1509404984.946 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-30T23:09:44.946Z,1509404984.946 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:09:45.012Z,1509404985.012 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:09:45.374Z,1509404985.374 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:09:45.374Z,1509404985.374 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-30T23:09:45.742Z,1509404985.742 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:09:45.747Z,1509404985.747 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:09:45.747Z,1509404985.747 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:09:53.316Z,1509404993.316 [PNI_TCM](ERROR): CRC does not match. Expected:0x8561 got:0x43493
2017-10-30T23:09:53.335Z,1509404993.335 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T23:09:53.335Z,1509404993.335 [BPC1] Data Fault, FailCount= 2
2017-10-30T23:09:53.335Z,1509404993.335 [BPC1](ERROR): Data Fault
2017-10-30T23:09:53.393Z,1509404993.393 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:09:54.587Z,1509404994.587 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:09:54.587Z,1509404994.587 [BPC1] No Fault, FailCount= 2
2017-10-30T23:10:07.736Z,1509405007.736 [PNI_TCM](ERROR): CRC does not match. Expected:0x32381 got:0x49330
2017-10-30T23:10:17.285Z,1509405017.285 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:10:17.315Z,1509405017.315 [PNI_TCM](ERROR): CRC does not match. Expected:0x40378 got:0x33
2017-10-30T23:10:22.118Z,1509405022.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x9632 got:0x45312
2017-10-30T23:10:26.917Z,1509405026.917 [PNI_TCM](ERROR): CRC does not match. Expected:0x56579 got:0x28679
2017-10-30T23:10:31.717Z,1509405031.717 [PNI_TCM](ERROR): CRC does not match. Expected:0x15066 got:0x43908
2017-10-30T23:10:46.116Z,1509405046.116 [PNI_TCM](ERROR): CRC does not match. Expected:0x59882 got:0x59599
2017-10-30T23:10:50.916Z,1509405050.916 [PNI_TCM](ERROR): CRC does not match. Expected:0x46484 got:0x6978
2017-10-30T23:10:53.782Z,1509405053.782 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:10:58.931Z,1509405058.931 [PNI_TCM](ERROR): CRC does not match. Expected:0x14434 got:0x10921
2017-10-30T23:11:03.755Z,1509405063.755 [PNI_TCM](ERROR): CRC does not match. Expected:0x25035 got:0x16384
2017-10-30T23:11:04.580Z,1509405064.580 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002576
CHAN A1 (24V): -0.003383
CHAN A2 (12V): -0.002400
CHAN A3 (5V): 0.000433
CHAN B0 (3.3V): -0.000009
CHAN B1 (3.15aV): -0.000514
CHAN B2 (3.15bV): -0.000070
CHAN B3 (GND): -0.000671
OPEN: -0.000689
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:11:08.523Z,1509405068.523 [PNI_TCM](ERROR): CRC does not match. Expected:0x59730 got:0x65178
2017-10-30T23:11:11.721Z,1509405071.721 [PNI_TCM](ERROR): CRC does not match. Expected:0x22811 got:0x49329
2017-10-30T23:11:13.322Z,1509405073.322 [PNI_TCM](ERROR): CRC does not match. Expected:0x46092 got:0x10933
2017-10-30T23:11:17.698Z,1509405077.698 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:11:21.316Z,1509405081.316 [PNI_TCM](ERROR): CRC does not match. Expected:0x33032 got:0x16816
2017-10-30T23:11:22.927Z,1509405082.927 [PNI_TCM](ERROR): CRC does not match. Expected:0x56060 got:0x7490
2017-10-30T23:11:30.937Z,1509405090.937 [PNI_TCM](ERROR): CRC does not match. Expected:0x3553 got:0x3613
2017-10-30T23:11:32.519Z,1509405092.519 [PNI_TCM](ERROR): CRC does not match. Expected:0x18530 got:0x43888
2017-10-30T23:11:37.338Z,1509405097.338 [PNI_TCM](ERROR): CRC does not match. Expected:0x40935 got:0x45378
2017-10-30T23:11:42.121Z,1509405102.121 [PNI_TCM](ERROR): CRC does not match. Expected:0x10706 got:0x21993
2017-10-30T23:11:45.780Z,1509405105.780 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T23:06:45.7Z
2017-10-30T23:11:45.780Z,1509405105.780 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T23:11:45.780Z,1509405105.780 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T23:11:46.923Z,1509405106.923 [PNI_TCM](ERROR): CRC does not match. Expected:0x41931 got:0x169
2017-10-30T23:12:00.501Z,1509405120.501 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-30T23:12:02.918Z,1509405122.918 [PNI_TCM](ERROR): CRC does not match. Expected:0x29102 got:0x12827
2017-10-30T23:12:14.132Z,1509405134.132 [PNI_TCM](ERROR): CRC does not match. Expected:0x61456 got:0x16384
2017-10-30T23:12:17.336Z,1509405137.336 [PNI_TCM](ERROR): CRC does not match. Expected:0x49640 got:0x8419
2017-10-30T23:12:18.089Z,1509405138.089 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:12:28.535Z,1509405148.535 [PNI_TCM](ERROR): CRC does not match. Expected:0x52581 got:0x10931
2017-10-30T23:12:31.729Z,1509405151.729 [PNI_TCM](ERROR): CRC does not match. Expected:0x51852 got:0x45120
2017-10-30T23:12:33.321Z,1509405153.321 [PNI_TCM](ERROR): CRC does not match. Expected:0x60086 got:0x45122
2017-10-30T23:12:35.010Z,1509405155.010 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:12:44.542Z,1509405164.542 [PNI_TCM](ERROR): CRC does not match. Expected:0x32003 got:0x16816
2017-10-30T23:12:45.760Z,1509405165.760 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:12:45.760Z,1509405165.760 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-30T23:12:45.760Z,1509405165.760 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:12:45.782Z,1509405165.782 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:12:45.790Z,1509405165.790 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134265
CHAN A1 (24V): -0.004001
CHAN A2 (12V): -0.002135
CHAN A3 (5V): -0.000179
CHAN B0 (3.3V): -0.000361
CHAN B1 (3.15aV): -0.000360
CHAN B2 (3.15bV): -0.000249
CHAN B3 (GND): -0.000887
OPEN: -0.000645
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:12:46.193Z,1509405166.193 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:12:46.193Z,1509405166.193 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-30T23:12:46.541Z,1509405166.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:12:46.542Z,1509405166.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:12:46.542Z,1509405166.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:13:07.480Z,1509405187.480 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T23:13:09.812Z,1509405189.812 [NAL9602](INFO): SBD MO Status=2, MOMSN=3296, MT Status=2, MTMSN=0
2017-10-30T23:13:09.812Z,1509405189.812 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:13:18.203Z,1509405198.203 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:13:36.342Z,1509405216.342 [NAL9602](INFO): SBD MO Status=2, MOMSN=3296, MT Status=2, MTMSN=0
2017-10-30T23:13:36.342Z,1509405216.342 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:14:02.068Z,1509405242.068 [BPC1](ERROR): Failed to receive battery data
2017-10-30T23:14:02.069Z,1509405242.069 [BPC1] Communications Fault, FailCount= 1
2017-10-30T23:14:02.069Z,1509405242.069 [BPC1](ERROR): Communications Fault
2017-10-30T23:14:02.113Z,1509405242.113 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T23:14:03.292Z,1509405243.292 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:14:03.293Z,1509405243.293 [BPC1] No Fault, FailCount= 1
2017-10-30T23:14:10.840Z,1509405250.840 [NAL9602](INFO): SBD MO Status=2, MOMSN=3296, MT Status=2, MTMSN=0
2017-10-30T23:14:10.841Z,1509405250.841 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:14:15.810Z,1509405255.810 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:14:18.587Z,1509405258.587 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:14:26.986Z,1509405266.986 [NAL9602](INFO): SBD MO Status=2, MOMSN=3296, MT Status=2, MTMSN=0
2017-10-30T23:14:26.987Z,1509405266.987 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:14:28.675Z,1509405268.675 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003148
CHAN A1 (24V): -0.003595
CHAN A2 (12V): -0.002135
CHAN A3 (5V): 0.000241
CHAN B0 (3.3V): -0.000358
CHAN B1 (3.15aV): -0.000746
CHAN B2 (3.15bV): 0.000019
CHAN B3 (GND): -0.000030
OPEN: -0.000656
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:15:18.582Z,1509405318.582 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:15:40.346Z,1509405340.346 [NAL9602](INFO): SBD MO Status=2, MOMSN=3296, MT Status=2, MTMSN=0
2017-10-30T23:15:40.346Z,1509405340.346 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:15:47.595Z,1509405347.595 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:15:47.595Z,1509405347.595 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-30T23:15:47.596Z,1509405347.596 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:15:47.637Z,1509405347.637 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:15:47.772Z,1509405347.772 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:15:47.772Z,1509405347.772 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-30T23:15:48.139Z,1509405348.139 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:15:48.140Z,1509405348.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:15:48.140Z,1509405348.140 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:15:58.944Z,1509405358.944 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:16:04.865Z,1509405364.865 [NAL9602](INFO): SBD MO Status=1, MOMSN=3296, MT Status=0, MTMSN=0
2017-10-30T23:16:04.914Z,1509405364.914 [NAL9602](INFO): Sent 45 bytes from file Logs/20171030T210256/Courier0052.lzma
2017-10-30T23:16:04.915Z,1509405364.915 [NAL9602](INFO): Packets left to send: 0
2017-10-30T23:16:04.917Z,1509405364.917 [NAL9602](DEBUG): Stored copy of sent data in Logs/20171030T210256/Courier0052.lzma.parts/0000.sbd
2017-10-30T23:16:04.917Z,1509405364.917 [NAL9602](DEBUG): Completed sending Logs/20171030T210256/Courier0052.lzma
2017-10-30T23:16:11.137Z,1509405371.137 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134351
CHAN A1 (24V): -0.003568
CHAN A2 (12V): -0.001520
CHAN A3 (5V): 0.000615
CHAN B0 (3.3V): -0.000381
CHAN B1 (3.15aV): -0.000337
CHAN B2 (3.15bV): -0.000484
CHAN B3 (GND): 0.000126
OPEN: -0.000532
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:16:12.691Z,1509405372.691 [BPC1](ERROR): Failed to parse message.
2017-10-30T23:16:12.691Z,1509405372.691 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T23:16:12.691Z,1509405372.691 [BPC1] Data Fault, FailCount= 1
2017-10-30T23:16:12.691Z,1509405372.691 [BPC1](ERROR): Data Fault
2017-10-30T23:16:12.731Z,1509405372.731 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:16:13.962Z,1509405373.962 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:16:13.963Z,1509405373.963 [BPC1] No Fault, FailCount= 1
2017-10-30T23:16:19.045Z,1509405379.045 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:16:20.650Z,1509405380.650 [NAL9602](INFO): SBD MO Status=1, MOMSN=3297, MT Status=0, MTMSN=0
2017-10-30T23:16:20.703Z,1509405380.703 [NAL9602](INFO): Sent 332 bytes from file Logs/20171030T210256/Express0053.lzma
2017-10-30T23:16:20.704Z,1509405380.704 [NAL9602](INFO): Packets left to send: 1
2017-10-30T23:16:20.705Z,1509405380.705 [NAL9602](DEBUG): Stored copy of sent data in Logs/20171030T210256/Express0053.lzma.parts/0001.sbd
2017-10-30T23:16:39.980Z,1509405399.980 [NAL9602](INFO): SBD MO Status=2, MOMSN=3298, MT Status=2, MTMSN=0
2017-10-30T23:16:39.980Z,1509405399.980 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:16:59.664Z,1509405419.664 [NAL9602](INFO): SBD MO Status=2, MOMSN=3298, MT Status=2, MTMSN=0
2017-10-30T23:16:59.664Z,1509405419.664 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:17:17.865Z,1509405437.865 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T23:17:17.865Z,1509405437.865 [BPC1] Data Fault, FailCount= 1
2017-10-30T23:17:17.865Z,1509405437.865 [BPC1](ERROR): Data Fault
2017-10-30T23:17:17.949Z,1509405437.949 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:17:19.035Z,1509405439.035 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:17:19.035Z,1509405439.035 [BPC1] No Fault, FailCount= 1
2017-10-30T23:17:19.373Z,1509405439.373 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:17:28.974Z,1509405448.974 [NAL9602](INFO): SBD MO Status=1, MOMSN=3298, MT Status=0, MTMSN=0
2017-10-30T23:17:29.023Z,1509405449.023 [NAL9602](INFO): Sent 217 bytes from file Logs/20171030T210256/Express0053.lzma
2017-10-30T23:17:29.024Z,1509405449.024 [NAL9602](INFO): Packets left to send: 0
2017-10-30T23:17:29.025Z,1509405449.025 [NAL9602](DEBUG): Stored copy of sent data in Logs/20171030T210256/Express0053.lzma.parts/0000.sbd
2017-10-30T23:17:29.025Z,1509405449.025 [NAL9602](DEBUG): Completed sending Logs/20171030T210256/Express0053.lzma
2017-10-30T23:17:41.457Z,1509405461.457 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:17:41.773Z,1509405461.773 [NAL9602](INFO): SBD MO Status=2, MOMSN=3299, MT Status=2, MTMSN=0
2017-10-30T23:17:41.773Z,1509405461.773 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:17:52.239Z,1509405472.239 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134792
CHAN A1 (24V): -0.004106
CHAN A2 (12V): -0.002409
CHAN A3 (5V): 0.000477
CHAN B0 (3.3V): 0.000205
CHAN B1 (3.15aV): -0.000189
CHAN B2 (3.15bV): -0.000131
CHAN B3 (GND): 0.000617
OPEN: -0.000217
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:18:00.599Z,1509405480.599 [BPC1](ERROR): Failed to parse message.
2017-10-30T23:18:00.599Z,1509405480.599 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-30T23:18:00.599Z,1509405480.599 [BPC1] Data Fault, FailCount= 1
2017-10-30T23:18:00.599Z,1509405480.599 [BPC1](ERROR): Data Fault
2017-10-30T23:18:00.661Z,1509405480.661 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:18:01.846Z,1509405481.846 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:18:01.846Z,1509405481.846 [BPC1] No Fault, FailCount= 1
2017-10-30T23:18:06.978Z,1509405486.978 [NAL9602](INFO): SBD MO Status=0, MOMSN=3299, MT Status=0, MTMSN=0
2017-10-30T23:18:07.086Z,1509405487.086 [Default:CheckIn:Read_Iridium] Stopped
2017-10-30T23:18:07.086Z,1509405487.086 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-30T23:18:07.086Z,1509405487.086 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-30T23:18:19.772Z,1509405499.772 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:18:37.777Z,1509405517.777 [NAL9602](INFO): Powering down
2017-10-30T23:18:48.210Z,1509405528.210 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:18:48.210Z,1509405528.210 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-30T23:18:48.210Z,1509405528.210 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:18:48.252Z,1509405528.252 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:18:48.653Z,1509405528.653 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:18:48.653Z,1509405528.653 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-30T23:18:49.020Z,1509405529.020 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:18:49.020Z,1509405529.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:18:49.021Z,1509405529.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:19:19.779Z,1509405559.779 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:19:22.633Z,1509405562.633 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:19:33.445Z,1509405573.445 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003462
CHAN A1 (24V): -0.003726
CHAN A2 (12V): -0.002050
CHAN A3 (5V): 0.000580
CHAN B0 (3.3V): -0.000398
CHAN B1 (3.15aV): 0.000075
CHAN B2 (3.15bV): -0.000391
CHAN B3 (GND): -0.000344
OPEN: -0.000515
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:20:20.171Z,1509405620.171 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:21:03.457Z,1509405663.457 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:21:14.239Z,1509405674.239 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135169
CHAN A1 (24V): -0.003026
CHAN A2 (12V): -0.002345
CHAN A3 (5V): 0.000064
CHAN B0 (3.3V): -0.000019
CHAN B1 (3.15aV): 0.000095
CHAN B2 (3.15bV): -0.000108
CHAN B3 (GND): -0.000233
OPEN: -0.000220
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:21:20.570Z,1509405680.570 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:21:49.031Z,1509405709.031 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:21:49.031Z,1509405709.031 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-30T23:21:49.031Z,1509405709.031 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:21:49.062Z,1509405709.062 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:21:49.446Z,1509405709.446 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:21:49.446Z,1509405709.446 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-30T23:21:49.876Z,1509405709.876 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:21:49.876Z,1509405709.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:21:49.876Z,1509405709.876 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:22:20.974Z,1509405740.974 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:22:44.255Z,1509405764.255 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:22:55.057Z,1509405775.057 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003043
CHAN A1 (24V): -0.003285
CHAN A2 (12V): -0.001998
CHAN A3 (5V): -0.000311
CHAN B0 (3.3V): -0.000107
CHAN B1 (3.15aV): -0.000446
CHAN B2 (3.15bV): -0.000039
CHAN B3 (GND): -0.000365
OPEN: -0.000683
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:23:07.830Z,1509405787.830 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-30T23:23:07.835Z,1509405787.835 [Default:CheckIn:C.Wait] Stopped
2017-10-30T23:23:07.835Z,1509405787.835 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-30T23:23:07.835Z,1509405787.835 [Default:CheckIn:D] Running Loop=1
2017-10-30T23:23:07.854Z,1509405787.854 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T23:23:08.232Z,1509405788.232 [Default:CheckIn:D] Stopped
2017-10-30T23:23:08.232Z,1509405788.232 [Default:CheckIn:E] Running Loop=1
2017-10-30T23:23:08.618Z,1509405788.618 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 46.008354 min 
2017-10-30T23:23:08.618Z,1509405788.618 [Default:CheckIn:E] Stopped
2017-10-30T23:23:08.618Z,1509405788.618 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-30T23:23:08.618Z,1509405788.618 [Default:CheckIn] Stopped
2017-10-30T23:23:08.618Z,1509405788.618 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-30T23:23:08.619Z,1509405788.619 [Default:CheckIn](INFO): Running loop #5
2017-10-30T23:23:08.619Z,1509405788.619 [Default:CheckIn] Running Loop=5
2017-10-30T23:23:08.619Z,1509405788.619 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-30T23:23:08.619Z,1509405788.619 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-30T23:23:09.385Z,1509405789.385 [NAL9602](INFO): Powering up
2017-10-30T23:23:20.573Z,1509405800.573 [NAL9602](INFO): NAL9602 initialized
2017-10-30T23:23:21.369Z,1509405801.369 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:23:21.372Z,1509405801.372 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-30T23:23:21.372Z,1509405801.372 [NAL9602] Data Fault, FailCount= 1
2017-10-30T23:23:21.372Z,1509405801.372 [NAL9602](ERROR): Data Fault
2017-10-30T23:23:21.448Z,1509405801.448 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-30T23:23:21.774Z,1509405801.774 [NAL9602](INFO): Powering down
2017-10-30T23:23:22.645Z,1509405802.645 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-30T23:23:22.645Z,1509405802.645 [NAL9602] No Fault, FailCount= 1
2017-10-30T23:23:52.174Z,1509405832.174 [NAL9602](INFO): Powering up NAL9602
2017-10-30T23:24:03.384Z,1509405843.384 [NAL9602](INFO): NAL9602 initialized
2017-10-30T23:24:21.376Z,1509405861.376 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:24:25.060Z,1509405865.060 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:24:35.871Z,1509405875.871 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134163
CHAN A1 (24V): -0.004129
CHAN A2 (12V): -0.002103
CHAN A3 (5V): -0.000065
CHAN B0 (3.3V): 0.000035
CHAN B1 (3.15aV): -0.000373
CHAN B2 (3.15bV): -0.000260
CHAN B3 (GND): 0.000052
OPEN: -0.000274
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:24:50.265Z,1509405890.265 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:24:50.265Z,1509405890.265 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-30T23:24:50.265Z,1509405890.265 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:24:50.303Z,1509405890.303 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:24:50.663Z,1509405890.663 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:24:50.663Z,1509405890.663 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-30T23:24:51.029Z,1509405891.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:24:51.029Z,1509405891.029 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:24:51.034Z,1509405891.034 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:25:21.772Z,1509405921.772 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:25:51.022Z,1509405951.022 [BPC1](ERROR): Failed to receive battery data
2017-10-30T23:25:51.022Z,1509405951.022 [BPC1] Communications Fault, FailCount= 1
2017-10-30T23:25:51.022Z,1509405951.022 [BPC1](ERROR): Communications Fault
2017-10-30T23:25:51.070Z,1509405951.070 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T23:25:52.241Z,1509405952.241 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:25:52.241Z,1509405952.241 [BPC1] No Fault, FailCount= 1
2017-10-30T23:26:06.237Z,1509405966.237 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:26:17.068Z,1509405977.068 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.002502
CHAN A1 (24V): -0.003783
CHAN A2 (12V): -0.001673
CHAN A3 (5V): 0.000304
CHAN B0 (3.3V): 0.000214
CHAN B1 (3.15aV): 0.000422
CHAN B2 (3.15bV): -0.000084
CHAN B3 (GND): 4.792929
OPEN: -0.000289
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:26:22.171Z,1509405982.171 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:26:51.780Z,1509406011.780 [NAL9602](INFO): SBD MO Status=2, MOMSN=3300, MT Status=2, MTMSN=0
2017-10-30T23:26:51.780Z,1509406011.780 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:27:22.571Z,1509406042.571 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:27:38.623Z,1509406058.623 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T23:27:38.623Z,1509406058.623 [BPC1] Data Fault, FailCount= 1
2017-10-30T23:27:38.623Z,1509406058.623 [BPC1](ERROR): Data Fault
2017-10-30T23:27:38.661Z,1509406058.661 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:27:39.857Z,1509406059.857 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:27:39.857Z,1509406059.857 [BPC1] No Fault, FailCount= 1
2017-10-30T23:27:47.463Z,1509406067.463 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:27:51.032Z,1509406071.032 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:27:51.032Z,1509406071.032 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-30T23:27:51.032Z,1509406071.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:27:51.066Z,1509406071.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:27:51.465Z,1509406071.465 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:27:51.465Z,1509406071.465 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-30T23:27:51.831Z,1509406071.831 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:27:51.832Z,1509406071.832 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:27:51.833Z,1509406071.833 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:27:58.268Z,1509406078.268 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002270
CHAN A1 (24V): -0.003959
CHAN A2 (12V): -0.002182
CHAN A3 (5V): 0.000250
CHAN B0 (3.3V): 0.000160
CHAN B1 (3.15aV): -0.000532
CHAN B2 (3.15bV): -0.000254
CHAN B3 (GND): -0.000016
OPEN: -0.000442
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:28:08.633Z,1509406088.633 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-30T23:23:08.6Z
2017-10-30T23:28:08.633Z,1509406088.633 [Default:CheckIn:Read_GPS] Stopped
2017-10-30T23:28:08.633Z,1509406088.633 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-30T23:28:22.978Z,1509406102.978 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:29:05.782Z,1509406145.782 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-30T23:29:22.977Z,1509406162.977 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:29:28.643Z,1509406168.643 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:29:39.461Z,1509406179.461 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003011
CHAN A1 (24V): -0.004018
CHAN A2 (12V): -0.002260
CHAN A3 (5V): 0.000724
CHAN B0 (3.3V): -0.000630
CHAN B1 (3.15aV): -0.000685
CHAN B2 (3.15bV): -0.000128
CHAN B3 (GND): -0.000200
OPEN: -0.000648
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:30:23.380Z,1509406223.380 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:30:52.231Z,1509406252.231 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:30:52.231Z,1509406252.231 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-30T23:30:52.231Z,1509406252.231 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:30:52.265Z,1509406252.265 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:30:52.651Z,1509406252.651 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:30:52.651Z,1509406252.651 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-30T23:30:53.039Z,1509406253.039 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:30:53.039Z,1509406253.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:30:53.039Z,1509406253.039 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:31:09.852Z,1509406269.852 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:31:20.690Z,1509406280.690 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002740
CHAN A1 (24V): -0.004618
CHAN A2 (12V): -0.002004
CHAN A3 (5V): 0.000268
CHAN B0 (3.3V): 0.000070
CHAN B1 (3.15aV): 0.000380
CHAN B2 (3.15bV): -0.000238
CHAN B3 (GND): 0.000120
OPEN: -0.000512
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:31:24.168Z,1509406284.168 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:32:05.541Z,1509406325.541 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-30T23:32:05.541Z,1509406325.541 [BPC1] Data Fault, FailCount= 1
2017-10-30T23:32:05.541Z,1509406325.541 [BPC1](ERROR): Data Fault
2017-10-30T23:32:05.595Z,1509406325.595 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:32:06.722Z,1509406326.722 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:32:06.722Z,1509406326.722 [BPC1] No Fault, FailCount= 1
2017-10-30T23:32:15.463Z,1509406335.463 [NAL9602](INFO): SBD MO Status=2, MOMSN=3300, MT Status=2, MTMSN=0
2017-10-30T23:32:15.464Z,1509406335.464 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:32:24.255Z,1509406344.255 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:32:50.850Z,1509406370.850 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:32:58.367Z,1509406378.367 [NAL9602](INFO): SBD MO Status=2, MOMSN=3300, MT Status=2, MTMSN=0
2017-10-30T23:32:58.368Z,1509406378.368 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:33:01.651Z,1509406381.651 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134545
CHAN A1 (24V): -0.003842
CHAN A2 (12V): -0.002648
CHAN A3 (5V): 0.000327
CHAN B0 (3.3V): 0.000010
CHAN B1 (3.15aV): -0.000655
CHAN B2 (3.15bV): -0.000346
CHAN B3 (GND): 0.000156
OPEN: -0.000374
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:33:08.135Z,1509406388.135 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T23:33:20.075Z,1509406400.075 [NAL9602](INFO): SBD MO Status=2, MOMSN=3300, MT Status=2, MTMSN=0
2017-10-30T23:33:20.076Z,1509406400.076 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:33:24.475Z,1509406404.475 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:33:33.000Z,1509406413.000 [NAL9602](INFO): SBD MO Status=2, MOMSN=3300, MT Status=2, MTMSN=0
2017-10-30T23:33:33.000Z,1509406413.000 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:33:53.042Z,1509406433.042 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:33:53.042Z,1509406433.042 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-30T23:33:53.042Z,1509406433.042 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:33:53.068Z,1509406433.068 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:33:53.472Z,1509406433.472 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:33:53.472Z,1509406433.472 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-30T23:33:53.850Z,1509406433.850 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:33:53.850Z,1509406433.850 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:33:53.851Z,1509406433.851 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:34:19.896Z,1509406459.896 [NAL9602](INFO): SBD MO Status=1, MOMSN=3300, MT Status=0, MTMSN=0
2017-10-30T23:34:19.950Z,1509406459.950 [NAL9602](INFO): Sent 45 bytes from file Logs/20171030T210256/Courier0056.lzma
2017-10-30T23:34:19.950Z,1509406459.950 [NAL9602](INFO): Packets left to send: 0
2017-10-30T23:34:19.952Z,1509406459.952 [NAL9602](DEBUG): Stored copy of sent data in Logs/20171030T210256/Courier0056.lzma.parts/0000.sbd
2017-10-30T23:34:19.952Z,1509406459.952 [NAL9602](DEBUG): Completed sending Logs/20171030T210256/Courier0056.lzma
2017-10-30T23:34:24.794Z,1509406464.794 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:34:31.686Z,1509406471.686 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:34:37.605Z,1509406477.605 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:34:37.605Z,1509406477.605 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:34:42.486Z,1509406482.486 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003307
CHAN A1 (24V): -0.003379
CHAN A2 (12V): -0.001715
CHAN A3 (5V): 0.000468
CHAN B0 (3.3V): -0.000227
CHAN B1 (3.15aV): -0.000594
CHAN B2 (3.15bV): 0.000504
CHAN B3 (GND): 0.000027
OPEN: -0.000002
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:35:03.685Z,1509406503.685 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:35:03.685Z,1509406503.685 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:35:23.708Z,1509406523.708 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-30T23:35:23.708Z,1509406523.708 [BPC1] Data Fault, FailCount= 1
2017-10-30T23:35:23.708Z,1509406523.708 [BPC1](ERROR): Data Fault
2017-10-30T23:35:23.760Z,1509406523.760 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:35:24.885Z,1509406524.885 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:35:24.978Z,1509406524.978 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:35:24.978Z,1509406524.978 [BPC1] No Fault, FailCount= 1
2017-10-30T23:35:52.639Z,1509406552.639 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:35:52.639Z,1509406552.639 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:36:12.813Z,1509406572.813 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:36:18.752Z,1509406578.752 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:36:18.752Z,1509406578.752 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:36:23.741Z,1509406583.741 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002954
CHAN A1 (24V): -0.003823
CHAN A2 (12V): -0.002082
CHAN A3 (5V): 0.000364
CHAN B0 (3.3V): -0.000015
CHAN B1 (3.15aV): -0.000064
CHAN B2 (3.15bV): -0.000258
CHAN B3 (GND): 0.000482
OPEN: -0.000407
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:36:26.489Z,1509406586.489 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:36:44.842Z,1509406604.842 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:36:44.843Z,1509406604.843 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:36:54.149Z,1509406614.149 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:36:54.149Z,1509406614.149 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-30T23:36:54.149Z,1509406614.149 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:36:54.164Z,1509406614.164 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:36:54.522Z,1509406614.522 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:36:54.522Z,1509406614.522 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-30T23:36:54.912Z,1509406614.912 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:36:54.912Z,1509406614.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:36:54.912Z,1509406614.912 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:37:25.240Z,1509406645.240 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:37:46.975Z,1509406666.975 [PNI_TCM](ERROR): CRC does not match. Expected:0x42166 got:0x50972
2017-10-30T23:37:48.580Z,1509406668.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x58674 got:0x49255
2017-10-30T23:37:49.748Z,1509406669.748 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:37:49.748Z,1509406669.748 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:37:53.794Z,1509406673.794 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:37:56.570Z,1509406676.570 [PNI_TCM](ERROR): CRC does not match. Expected:0x58856 got:0x858
2017-10-30T23:37:59.763Z,1509406679.763 [PNI_TCM](ERROR): CRC does not match. Expected:0x65198 got:0x16938
2017-10-30T23:38:01.365Z,1509406681.365 [PNI_TCM](ERROR): CRC does not match. Expected:0x24216 got:0x62235
2017-10-30T23:38:02.968Z,1509406682.968 [PNI_TCM](ERROR): CRC does not match. Expected:0x7032 got:0x7360
2017-10-30T23:38:04.615Z,1509406684.615 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134209
CHAN A1 (24V): -0.003917
CHAN A2 (12V): -0.002064
CHAN A3 (5V): 0.000012
CHAN B0 (3.3V): 0.000140
CHAN B1 (3.15aV): -0.000069
CHAN B2 (3.15bV): 0.000081
CHAN B3 (GND): -0.000126
OPEN: -0.000409
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:38:18.981Z,1509406698.981 [PNI_TCM](ERROR): CRC does not match. Expected:0x63646 got:0x57372
2017-10-30T23:38:22.162Z,1509406702.162 [PNI_TCM](ERROR): CRC does not match. Expected:0x56412 got:0x40428
2017-10-30T23:38:23.761Z,1509406703.761 [PNI_TCM](ERROR): CRC does not match. Expected:0x12279 got:0x6335
2017-10-30T23:38:25.378Z,1509406705.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x48727 got:0x21979
2017-10-30T23:38:25.731Z,1509406705.731 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:38:27.007Z,1509406707.007 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-30T23:38:34.981Z,1509406714.981 [PNI_TCM](ERROR): CRC does not match. Expected:0x12386 got:0x60810
2017-10-30T23:38:49.361Z,1509406729.361 [PNI_TCM](ERROR): CRC does not match. Expected:0x15077 got:0x49067
2017-10-30T23:38:50.964Z,1509406730.964 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-30T23:38:52.566Z,1509406732.566 [PNI_TCM](ERROR): CRC does not match. Expected:0x63845 got:0x52505
2017-10-30T23:39:00.559Z,1509406740.559 [PNI_TCM](ERROR): CRC does not match. Expected:0x44342 got:0x43961
2017-10-30T23:39:08.569Z,1509406748.569 [PNI_TCM](ERROR): CRC does not match. Expected:0x10040 got:0x45120
2017-10-30T23:39:25.442Z,1509406765.442 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:39:29.049Z,1509406769.049 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:39:29.049Z,1509406769.049 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:39:34.725Z,1509406774.725 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:39:45.541Z,1509406785.541 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003071
CHAN A1 (24V): -0.003841
CHAN A2 (12V): -0.002247
CHAN A3 (5V): 0.000585
CHAN B0 (3.3V): -0.000193
CHAN B1 (3.15aV): -0.000378
CHAN B2 (3.15bV): 0.000072
CHAN B3 (GND): 0.000314
OPEN: -0.000052
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:39:55.097Z,1509406795.097 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:39:55.097Z,1509406795.097 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-30T23:39:55.097Z,1509406795.097 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:39:55.128Z,1509406795.128 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:39:55.129Z,1509406795.129 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:40:25.841Z,1509406825.841 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:40:56.808Z,1509406856.808 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:40:56.808Z,1509406856.808 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:41:15.706Z,1509406875.706 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:41:26.004Z,1509406886.004 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:41:26.492Z,1509406886.492 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134159
CHAN A1 (24V): -0.004425
CHAN A2 (12V): -0.001517
CHAN A3 (5V): 0.000524
CHAN B0 (3.3V): 0.000084
CHAN B1 (3.15aV): 0.000033
CHAN B2 (3.15bV): -0.000202
CHAN B3 (GND): 0.000483
OPEN: -0.000468
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:41:36.136Z,1509406896.136 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:41:36.136Z,1509406896.136 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:41:48.580Z,1509406908.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x57575 got:0x60315
2017-10-30T23:41:50.162Z,1509406910.162 [PNI_TCM](ERROR): CRC does not match. Expected:0x26284 got:0x7490
2017-10-30T23:41:50.587Z,1509406910.587 [PNI_TCM](ERROR): CRC does not match. Expected:0x41419 got:0x16384
2017-10-30T23:42:15.432Z,1509406935.432 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:42:15.432Z,1509406935.432 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:42:15.473Z,1509406935.473 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T23:42:15.473Z,1509406935.473 [BPC1] Data Fault, FailCount= 1
2017-10-30T23:42:15.474Z,1509406935.474 [BPC1](ERROR): Data Fault
2017-10-30T23:42:15.523Z,1509406935.523 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:42:16.724Z,1509406936.724 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:42:16.724Z,1509406936.724 [BPC1] No Fault, FailCount= 1
2017-10-30T23:42:25.827Z,1509406945.827 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:42:36.683Z,1509406956.683 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-30T23:42:36.684Z,1509406956.684 [BPC1] Data Fault, FailCount= 2
2017-10-30T23:42:36.684Z,1509406956.684 [BPC1](ERROR): Data Fault
2017-10-30T23:42:36.751Z,1509406956.751 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-30T23:42:37.906Z,1509406957.906 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:42:37.906Z,1509406957.906 [BPC1] No Fault, FailCount= 2
2017-10-30T23:42:56.710Z,1509406976.710 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:43:07.507Z,1509406987.507 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002886
CHAN A1 (24V): -0.003774
CHAN A2 (12V): -0.001888
CHAN A3 (5V): 0.000118
CHAN B0 (3.3V): -0.000846
CHAN B1 (3.15aV): -0.000693
CHAN B2 (3.15bV): -0.000058
CHAN B3 (GND): 0.000046
OPEN: -0.000504
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:43:08.287Z,1509406988.287 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T23:43:26.771Z,1509407006.771 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:43:37.534Z,1509407017.534 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:43:37.534Z,1509407017.534 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:44:26.902Z,1509407066.902 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:44:37.743Z,1509407077.743 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:44:42.073Z,1509407082.073 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:44:42.074Z,1509407082.074 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:44:48.566Z,1509407088.566 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003115
CHAN A1 (24V): -0.003604
CHAN A2 (12V): -0.002686
CHAN A3 (5V): 0.000542
CHAN B0 (3.3V): -0.000033
CHAN B1 (3.15aV): -0.000525
CHAN B2 (3.15bV): -0.000667
CHAN B3 (GND): 0.000058
OPEN: -0.000400
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:45:08.191Z,1509407108.191 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:45:08.191Z,1509407108.191 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:45:15.813Z,1509407115.813 [BPC1](ERROR): Failed to receive battery data
2017-10-30T23:45:15.813Z,1509407115.813 [BPC1] Communications Fault, FailCount= 1
2017-10-30T23:45:15.813Z,1509407115.813 [BPC1](ERROR): Communications Fault
2017-10-30T23:45:15.848Z,1509407115.848 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T23:45:16.738Z,1509407116.738 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:45:16.738Z,1509407116.738 [BPC1] No Fault, FailCount= 1
2017-10-30T23:45:26.268Z,1509407126.268 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:45:33.884Z,1509407133.884 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:45:33.884Z,1509407133.884 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:45:59.583Z,1509407159.583 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:45:59.583Z,1509407159.583 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:46:18.831Z,1509407178.831 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:46:26.768Z,1509407186.768 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:46:29.657Z,1509407189.657 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134589
CHAN A1 (24V): -0.003700
CHAN A2 (12V): -0.002103
CHAN A3 (5V): -0.000303
CHAN B0 (3.3V): -0.000172
CHAN B1 (3.15aV): 0.000016
CHAN B2 (3.15bV): -0.000143
CHAN B3 (GND): -0.000100
OPEN: -0.000539
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:46:50.086Z,1509407210.086 [NAL9602](INFO): SBD MO Status=2, MOMSN=3301, MT Status=2, MTMSN=0
2017-10-30T23:46:50.086Z,1509407210.086 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:47:26.883Z,1509407246.883 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:47:59.794Z,1509407279.794 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:48:10.622Z,1509407290.622 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.002758
CHAN A1 (24V): -0.003424
CHAN A2 (12V): 4.697929
CHAN A3 (5V): 0.000097
CHAN B0 (3.3V): -0.000087
CHAN B1 (3.15aV): -0.000770
CHAN B2 (3.15bV): -0.000385
CHAN B3 (GND): -0.000260
OPEN: -0.000501
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:48:27.282Z,1509407307.282 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:49:27.685Z,1509407367.685 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:49:40.976Z,1509407380.976 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:49:51.747Z,1509407391.747 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134609
CHAN A1 (24V): -0.003898
CHAN A2 (12V): -0.001274
CHAN A3 (5V): -0.000042
CHAN B0 (3.3V): 0.000075
CHAN B1 (3.15aV): -0.000055
CHAN B2 (3.15bV): -0.000273
CHAN B3 (GND): -0.000007
OPEN: -0.000462
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:50:27.288Z,1509407427.288 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:51:21.750Z,1509407481.750 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:51:28.080Z,1509407488.080 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:51:32.608Z,1509407492.608 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002617
CHAN A1 (24V): -0.003654
CHAN A2 (12V): -0.002157
CHAN A3 (5V): 0.000703
CHAN B0 (3.3V): -0.000610
CHAN B1 (3.15aV): -0.000717
CHAN B2 (3.15bV): -0.000414
CHAN B3 (GND): -0.000289
OPEN: -0.000950
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:52:28.480Z,1509407548.480 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:53:02.988Z,1509407582.988 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:53:08.539Z,1509407588.539 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-30T23:53:13.790Z,1509407593.790 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134678
CHAN A1 (24V): -0.003783
CHAN A2 (12V): -0.002215
CHAN A3 (5V): 0.000592
CHAN B0 (3.3V): -0.000278
CHAN B1 (3.15aV): -0.000601
CHAN B2 (3.15bV): -0.000620
CHAN B3 (GND): 0.000050
OPEN: -0.000277
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:53:28.119Z,1509407608.119 [BPC1](ERROR): Failed to receive battery data
2017-10-30T23:53:28.119Z,1509407608.119 [BPC1] Communications Fault, FailCount= 1
2017-10-30T23:53:28.119Z,1509407608.119 [BPC1](ERROR): Communications Fault
2017-10-30T23:53:28.188Z,1509407608.188 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T23:53:28.887Z,1509407608.887 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:53:29.358Z,1509407609.358 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:53:29.358Z,1509407609.358 [BPC1] No Fault, FailCount= 1
2017-10-30T23:53:50.196Z,1509407630.196 [PNI_TCM](ERROR): CRC does not match. Expected:0x31301 got:0x45184
2017-10-30T23:54:10.972Z,1509407650.972 [NAL9602](INFO): SBD MO Status=1, MOMSN=3301, MT Status=0, MTMSN=0
2017-10-30T23:54:11.021Z,1509407651.021 [NAL9602](INFO): Sent 332 bytes from file Logs/20171030T210256/Express0057.lzma
2017-10-30T23:54:11.021Z,1509407651.021 [NAL9602](INFO): Packets left to send: 2
2017-10-30T23:54:11.023Z,1509407651.023 [NAL9602](DEBUG): Stored copy of sent data in Logs/20171030T210256/Express0057.lzma.parts/0002.sbd
2017-10-30T23:54:22.730Z,1509407662.730 [NAL9602](INFO): SBD MO Status=2, MOMSN=3302, MT Status=2, MTMSN=0
2017-10-30T23:54:22.730Z,1509407662.730 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-30T23:54:28.730Z,1509407668.730 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:54:43.999Z,1509407683.999 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:54:54.861Z,1509407694.861 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003305
CHAN A1 (24V): -0.004066
CHAN A2 (12V): -0.002145
CHAN A3 (5V): -0.000370
CHAN B0 (3.3V): -0.000225
CHAN B1 (3.15aV): -0.000004
CHAN B2 (3.15bV): 0.000078
CHAN B3 (GND): -0.000815
OPEN: -0.000423
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:54:55.212Z,1509407695.212 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:54:55.212Z,1509407695.212 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-30T23:54:55.589Z,1509407695.589 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:54:55.589Z,1509407695.589 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:54:55.590Z,1509407695.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:55:00.763Z,1509407700.763 [BPC1](ERROR): Failed to receive battery data
2017-10-30T23:55:00.764Z,1509407700.764 [BPC1] Communications Fault, FailCount= 1
2017-10-30T23:55:00.764Z,1509407700.764 [BPC1](ERROR): Communications Fault
2017-10-30T23:55:00.812Z,1509407700.812 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-30T23:55:02.005Z,1509407702.005 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-30T23:55:02.005Z,1509407702.005 [BPC1] No Fault, FailCount= 1
2017-10-30T23:55:29.125Z,1509407729.125 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:56:25.222Z,1509407785.222 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:56:29.521Z,1509407789.521 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:56:35.991Z,1509407795.991 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134357
CHAN A1 (24V): -0.003700
CHAN A2 (12V): -0.002291
CHAN A3 (5V): 0.000039
CHAN B0 (3.3V): -0.000457
CHAN B1 (3.15aV): -0.000163
CHAN B2 (3.15bV): -0.000396
CHAN B3 (GND): -0.000147
OPEN: -0.000432
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:57:29.924Z,1509407849.924 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:57:55.655Z,1509407875.655 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-30T23:57:55.655Z,1509407875.655 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-30T23:57:55.655Z,1509407875.655 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-30T23:57:55.676Z,1509407875.676 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-30T23:57:56.017Z,1509407876.017 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-30T23:57:56.017Z,1509407876.017 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-30T23:57:56.385Z,1509407876.385 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-30T23:57:56.386Z,1509407876.386 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-30T23:57:56.386Z,1509407876.386 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-30T23:58:06.017Z,1509407886.017 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:58:16.804Z,1509407896.804 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003170
CHAN A1 (24V): -0.003723
CHAN A2 (12V): -0.002439
CHAN A3 (5V): -0.000027
CHAN B0 (3.3V): -0.000052
CHAN B1 (3.15aV): 0.000157
CHAN B2 (3.15bV): -0.000298
CHAN B3 (GND): 0.000052
OPEN: -0.000716
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-30T23:58:30.328Z,1509407910.328 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:59:30.331Z,1509407970.331 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-30T23:59:46.833Z,1509407986.833 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-30T23:59:57.610Z,1509407997.610 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134425
CHAN A1 (24V): -0.003936
CHAN A2 (12V): -0.002167
CHAN A3 (5V): 0.000354
CHAN B0 (3.3V): 0.000287
CHAN B1 (3.15aV): -0.000414
CHAN B2 (3.15bV): -0.000282
CHAN B3 (GND): 0.000294
OPEN: -0.000442
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:00:30.731Z,1509408030.731 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:00:56.387Z,1509408056.387 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:00:56.387Z,1509408056.387 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T00:00:56.387Z,1509408056.387 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:00:56.425Z,1509408056.425 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:00:56.819Z,1509408056.819 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:00:56.819Z,1509408056.819 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T00:00:57.173Z,1509408057.173 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:00:57.174Z,1509408057.174 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:00:57.174Z,1509408057.174 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:01:27.627Z,1509408087.627 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:01:30.733Z,1509408090.733 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:01:38.409Z,1509408098.409 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003018
CHAN A1 (24V): -0.004182
CHAN A2 (12V): -0.002341
CHAN A3 (5V): 0.000120
CHAN B0 (3.3V): -0.000495
CHAN B1 (3.15aV): 0.000067
CHAN B2 (3.15bV): 0.000125
CHAN B3 (GND): -0.000268
OPEN: -0.000409
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:01:39.199Z,1509408099.199 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T00:01:39.199Z,1509408099.199 [BPC1] Data Fault, FailCount= 1
2017-10-31T00:01:39.199Z,1509408099.199 [BPC1](ERROR): Data Fault
2017-10-31T00:01:39.227Z,1509408099.227 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T00:01:40.415Z,1509408100.415 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:01:40.415Z,1509408100.415 [BPC1] No Fault, FailCount= 1
2017-10-31T00:02:31.133Z,1509408151.133 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:03:08.511Z,1509408188.511 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:03:08.938Z,1509408188.938 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T00:03:19.301Z,1509408199.301 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134627
CHAN A1 (24V): -0.004416
CHAN A2 (12V): -0.002024
CHAN A3 (5V): 0.000395
CHAN B0 (3.3V): -0.000189
CHAN B1 (3.15aV): -0.000045
CHAN B2 (3.15bV): -0.000246
CHAN B3 (GND): 0.000000
OPEN: -0.000465
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:03:31.239Z,1509408211.239 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:03:36.037Z,1509408216.037 [NAL9602](INFO): SBD MO Status=2, MOMSN=3302, MT Status=2, MTMSN=0
2017-10-31T00:03:36.037Z,1509408216.037 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T00:03:57.281Z,1509408237.281 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:03:57.281Z,1509408237.281 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T00:03:57.281Z,1509408237.281 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:03:57.295Z,1509408237.295 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:03:57.694Z,1509408237.694 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:03:57.694Z,1509408237.694 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T00:03:58.097Z,1509408238.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:03:58.097Z,1509408238.097 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:03:58.098Z,1509408238.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:04:32.032Z,1509408272.032 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:04:34.460Z,1509408274.460 [BPC1](ERROR): Failed to parse message.
2017-10-31T00:04:34.461Z,1509408274.461 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T00:04:34.461Z,1509408274.461 [BPC1] Data Fault, FailCount= 1
2017-10-31T00:04:34.461Z,1509408274.461 [BPC1](ERROR): Data Fault
2017-10-31T00:04:34.535Z,1509408274.535 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T00:04:35.716Z,1509408275.716 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:04:35.716Z,1509408275.716 [BPC1] No Fault, FailCount= 1
2017-10-31T00:04:49.794Z,1509408289.794 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:05:00.534Z,1509408300.534 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002387
CHAN A1 (24V): -0.003311
CHAN A2 (12V): -0.002686
CHAN A3 (5V): 0.000745
CHAN B0 (3.3V): 0.000213
CHAN B1 (3.15aV): -0.000232
CHAN B2 (3.15bV): 0.000249
CHAN B3 (GND): 0.000391
OPEN: -0.000350
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:05:31.642Z,1509408331.642 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:06:30.912Z,1509408390.912 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:06:32.033Z,1509408392.033 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:06:41.743Z,1509408401.743 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002471
CHAN A1 (24V): -0.004536
CHAN A2 (12V): -0.002507
CHAN A3 (5V): 0.000161
CHAN B0 (3.3V): -0.000157
CHAN B1 (3.15aV): -0.000307
CHAN B2 (3.15bV): -0.000229
CHAN B3 (GND): -0.000304
OPEN: -0.000547
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:06:58.482Z,1509408418.482 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:06:58.482Z,1509408418.482 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T00:06:58.482Z,1509408418.482 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:06:58.527Z,1509408418.527 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:06:58.892Z,1509408418.892 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:06:58.892Z,1509408418.892 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T00:06:59.291Z,1509408419.291 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:06:59.296Z,1509408419.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:06:59.296Z,1509408419.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:07:27.273Z,1509408447.273 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T00:07:27.273Z,1509408447.273 [BPC1] Data Fault, FailCount= 1
2017-10-31T00:07:27.273Z,1509408447.273 [BPC1](ERROR): Data Fault
2017-10-31T00:07:27.295Z,1509408447.295 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T00:07:28.495Z,1509408448.495 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:07:28.495Z,1509408448.495 [BPC1] No Fault, FailCount= 1
2017-10-31T00:07:32.036Z,1509408452.036 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:08:11.754Z,1509408491.754 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:08:22.546Z,1509408502.546 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134971
CHAN A1 (24V): -0.004332
CHAN A2 (12V): -0.001809
CHAN A3 (5V): 0.000165
CHAN B0 (3.3V): 0.000591
CHAN B1 (3.15aV): -0.000237
CHAN B2 (3.15bV): -0.000593
CHAN B3 (GND): -0.000360
OPEN: -0.000283
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:08:32.039Z,1509408512.039 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:09:32.831Z,1509408572.831 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:09:52.924Z,1509408592.924 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:09:59.700Z,1509408599.700 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:09:59.700Z,1509408599.700 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T00:09:59.700Z,1509408599.700 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:09:59.738Z,1509408599.738 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:10:00.133Z,1509408600.133 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:10:00.133Z,1509408600.133 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T00:10:00.491Z,1509408600.491 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:10:00.492Z,1509408600.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:10:00.492Z,1509408600.492 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:10:03.764Z,1509408603.764 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003006
CHAN A1 (24V): -0.004156
CHAN A2 (12V): -0.002316
CHAN A3 (5V): -0.000332
CHAN B0 (3.3V): 0.000225
CHAN B1 (3.15aV): 0.000145
CHAN B2 (3.15bV): -0.000210
CHAN B3 (GND): 0.000279
OPEN: -0.000253
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:10:32.834Z,1509408632.834 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:11:33.238Z,1509408693.238 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:11:34.116Z,1509408694.116 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:11:44.939Z,1509408704.939 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134610
CHAN A1 (24V): -0.003910
CHAN A2 (12V): -0.002550
CHAN A3 (5V): 0.000557
CHAN B0 (3.3V): 0.000014
CHAN B1 (3.15aV): -0.000597
CHAN B2 (3.15bV): -0.000481
CHAN B3 (GND): -0.000595
OPEN: -0.000229
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:12:33.637Z,1509408753.637 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:13:00.555Z,1509408780.555 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:13:00.555Z,1509408780.555 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T00:13:00.555Z,1509408780.555 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:13:00.585Z,1509408780.585 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:13:00.890Z,1509408780.890 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:13:00.890Z,1509408780.890 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T00:13:01.331Z,1509408781.331 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:13:01.332Z,1509408781.332 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:13:01.332Z,1509408781.332 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:13:09.323Z,1509408789.323 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T00:13:14.956Z,1509408794.956 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:13:25.717Z,1509408805.717 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002252
CHAN A1 (24V): -0.004618
CHAN A2 (12V): -0.002732
CHAN A3 (5V): 0.000014
CHAN B0 (3.3V): -0.000318
CHAN B1 (3.15aV): 0.000058
CHAN B2 (3.15bV): -0.000058
CHAN B3 (GND): 0.000159
OPEN: -0.000221
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:13:33.640Z,1509408813.640 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:14:34.031Z,1509408874.031 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:14:56.136Z,1509408896.136 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:15:06.988Z,1509408906.988 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134494
CHAN A1 (24V): -0.003520
CHAN A2 (12V): -0.002113
CHAN A3 (5V): 0.000295
CHAN B0 (3.3V): 0.000201
CHAN B1 (3.15aV): -0.000043
CHAN B2 (3.15bV): -0.000070
CHAN B3 (GND): -0.000351
OPEN: -0.000517
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:15:34.034Z,1509408934.034 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:16:01.682Z,1509408961.682 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:16:01.682Z,1509408961.682 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T00:16:01.683Z,1509408961.683 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:16:01.704Z,1509408961.704 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:16:02.141Z,1509408962.141 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:16:02.141Z,1509408962.141 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T00:16:02.479Z,1509408962.479 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:16:02.480Z,1509408962.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:16:02.480Z,1509408962.480 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:16:12.095Z,1509408972.095 [BPC1](ERROR): Failed to parse message.
2017-10-31T00:16:12.095Z,1509408972.095 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T00:16:12.096Z,1509408972.096 [BPC1] Data Fault, FailCount= 1
2017-10-31T00:16:12.096Z,1509408972.096 [BPC1](ERROR): Data Fault
2017-10-31T00:16:12.135Z,1509408972.135 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T00:16:13.312Z,1509408973.312 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:16:13.312Z,1509408973.312 [BPC1] No Fault, FailCount= 1
2017-10-31T00:16:34.434Z,1509408994.434 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:16:37.300Z,1509408997.300 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:16:48.115Z,1509409008.115 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134998
CHAN A1 (24V): -0.003726
CHAN A2 (12V): -0.002056
CHAN A3 (5V): -0.000221
CHAN B0 (3.3V): 0.000079
CHAN B1 (3.15aV): 0.000793
CHAN B2 (3.15bV): -0.000540
CHAN B3 (GND): 0.000662
OPEN: -0.000450
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:17:34.833Z,1509409054.833 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:18:18.535Z,1509409098.535 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:18:29.359Z,1509409109.359 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003933
CHAN A1 (24V): -0.003270
CHAN A2 (12V): -0.002377
CHAN A3 (5V): -0.000168
CHAN B0 (3.3V): -0.000342
CHAN B1 (3.15aV): -0.000523
CHAN B2 (3.15bV): -0.000440
CHAN B3 (GND): -0.000350
OPEN: -0.000395
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:18:34.836Z,1509409114.836 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:19:02.909Z,1509409142.909 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:19:02.909Z,1509409142.909 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T00:19:02.909Z,1509409142.909 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:19:02.931Z,1509409142.931 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:19:03.343Z,1509409143.343 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:19:03.343Z,1509409143.343 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T00:19:03.718Z,1509409143.718 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:19:03.719Z,1509409143.719 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:19:03.719Z,1509409143.719 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:19:35.232Z,1509409175.232 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:19:59.700Z,1509409199.700 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:20:10.522Z,1509409210.522 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134447
CHAN A1 (24V): -0.004389
CHAN A2 (12V): -0.002498
CHAN A3 (5V): 0.000101
CHAN B0 (3.3V): -0.000001
CHAN B1 (3.15aV): 0.000093
CHAN B2 (3.15bV): -0.000395
CHAN B3 (GND): 0.000062
OPEN: -0.000460
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:20:35.231Z,1509409235.231 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-31T00:21:09.865Z,1509409269.865 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002607
2017-10-31T00:21:14.076Z,1509409274.076 [DataOverHttps](INFO): Sending 806 bytes from file Logs/20171030T210256/Express0057.lzma
2017-10-31T00:21:14.803Z,1509409274.803 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0057.lzma.bak
2017-10-31T00:21:14.803Z,1509409274.803 [DataOverHttps](INFO): SBD MOMSN=5177465
2017-10-31T00:21:15.262Z,1509409275.262 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T00:21:15.262Z,1509409275.262 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T00:21:15.262Z,1509409275.262 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T00:21:40.782Z,1509409300.782 [NAL9602](INFO): Powering down
2017-10-31T00:21:40.860Z,1509409300.860 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:21:51.730Z,1509409311.730 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003150
CHAN A1 (24V): -0.003768
CHAN A2 (12V): -0.002463
CHAN A3 (5V): 0.000665
CHAN B0 (3.3V): 0.000787
CHAN B1 (3.15aV): -0.000441
CHAN B2 (3.15bV): -0.000446
CHAN B3 (GND): -0.000342
OPEN: -0.000273
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:22:04.035Z,1509409324.035 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:22:04.035Z,1509409324.035 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T00:22:04.035Z,1509409324.035 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:22:04.050Z,1509409324.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:22:04.451Z,1509409324.451 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:22:04.451Z,1509409324.451 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T00:22:04.837Z,1509409324.837 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:22:04.837Z,1509409324.837 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:22:04.837Z,1509409324.837 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:22:56.618Z,1509409376.618 [BPC1](ERROR): Failed to receive battery data
2017-10-31T00:22:56.618Z,1509409376.618 [BPC1] Communications Fault, FailCount= 1
2017-10-31T00:22:56.618Z,1509409376.618 [BPC1](ERROR): Communications Fault
2017-10-31T00:22:56.671Z,1509409376.671 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T00:22:57.825Z,1509409377.825 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:22:57.825Z,1509409377.825 [BPC1] No Fault, FailCount= 1
2017-10-31T00:23:09.418Z,1509409389.418 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T00:23:21.741Z,1509409401.741 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:23:32.552Z,1509409412.552 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134507
CHAN A1 (24V): -0.003938
CHAN A2 (12V): -0.001589
CHAN A3 (5V): -0.000185
CHAN B0 (3.3V): -0.000620
CHAN B1 (3.15aV): -0.000269
CHAN B2 (3.15bV): -0.000120
CHAN B3 (GND): 0.000315
OPEN: -0.000192
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:24:07.312Z,1509409447.312 [BPC1](ERROR): Failed to receive battery data
2017-10-31T00:24:07.312Z,1509409447.312 [BPC1] Communications Fault, FailCount= 1
2017-10-31T00:24:07.312Z,1509409447.312 [BPC1](ERROR): Communications Fault
2017-10-31T00:24:07.375Z,1509409447.375 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T00:24:08.565Z,1509409448.565 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:24:08.565Z,1509409448.565 [BPC1] No Fault, FailCount= 1
2017-10-31T00:25:02.938Z,1509409502.938 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:25:04.911Z,1509409504.911 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:25:04.911Z,1509409504.911 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T00:25:04.911Z,1509409504.911 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:25:04.925Z,1509409504.925 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:25:05.321Z,1509409505.321 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:25:05.321Z,1509409505.321 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T00:25:05.689Z,1509409505.689 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:25:05.693Z,1509409505.693 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:25:05.694Z,1509409505.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:25:13.731Z,1509409513.731 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002869
CHAN A1 (24V): -0.004310
CHAN A2 (12V): -0.002077
CHAN A3 (5V): 0.000527
CHAN B0 (3.3V): -0.000292
CHAN B1 (3.15aV): 0.000116
CHAN B2 (3.15bV): 0.000030
CHAN B3 (GND): 0.000309
OPEN: -0.000270
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:26:15.879Z,1509409575.879 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T00:26:15.880Z,1509409575.880 [Default:CheckIn:C.Wait] Stopped
2017-10-31T00:26:15.880Z,1509409575.880 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T00:26:15.880Z,1509409575.880 [Default:CheckIn:D] Running Loop=1
2017-10-31T00:26:16.287Z,1509409576.287 [Default:CheckIn:D] Stopped
2017-10-31T00:26:16.287Z,1509409576.287 [Default:CheckIn:E] Running Loop=1
2017-10-31T00:26:16.683Z,1509409576.683 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 109.142879 min 
2017-10-31T00:26:16.683Z,1509409576.683 [Default:CheckIn:E] Stopped
2017-10-31T00:26:16.683Z,1509409576.683 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T00:26:16.683Z,1509409576.683 [Default:CheckIn] Stopped
2017-10-31T00:26:16.684Z,1509409576.684 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T00:26:16.684Z,1509409576.684 [Default:CheckIn](INFO): Running loop #6
2017-10-31T00:26:16.684Z,1509409576.684 [Default:CheckIn] Running Loop=6
2017-10-31T00:26:16.684Z,1509409576.684 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T00:26:16.684Z,1509409576.684 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T00:26:20.317Z,1509409580.317 [NAL9602](INFO): Powering up
2017-10-31T00:26:31.271Z,1509409591.271 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:26:32.068Z,1509409592.068 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T00:26:32.068Z,1509409592.068 [NAL9602] Data Fault, FailCount= 2
2017-10-31T00:26:32.068Z,1509409592.068 [NAL9602](ERROR): Data Fault
2017-10-31T00:26:32.161Z,1509409592.161 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T00:26:32.472Z,1509409592.472 [NAL9602](INFO): Powering down
2017-10-31T00:26:33.368Z,1509409593.368 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T00:26:33.368Z,1509409593.368 [NAL9602] No Fault, FailCount= 2
2017-10-31T00:26:43.753Z,1509409603.753 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:26:54.561Z,1509409614.561 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134645
CHAN A1 (24V): -0.004153
CHAN A2 (12V): -0.002151
CHAN A3 (5V): 0.000803
CHAN B0 (3.3V): -0.000071
CHAN B1 (3.15aV): -0.000552
CHAN B2 (3.15bV): -0.000384
CHAN B3 (GND): 0.000052
OPEN: -0.000253
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:27:02.868Z,1509409622.868 [NAL9602](INFO): Powering up NAL9602
2017-10-31T00:27:14.066Z,1509409634.066 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:27:25.559Z,1509409645.559 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T00:27:25.559Z,1509409645.559 [BPC1] Data Fault, FailCount= 1
2017-10-31T00:27:25.559Z,1509409645.559 [BPC1](ERROR): Data Fault
2017-10-31T00:27:25.616Z,1509409645.616 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T00:27:26.788Z,1509409646.788 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:27:26.788Z,1509409646.788 [BPC1] No Fault, FailCount= 1
2017-10-31T00:28:05.957Z,1509409685.957 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:28:05.957Z,1509409685.957 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T00:28:05.957Z,1509409685.957 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:28:05.987Z,1509409685.987 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:28:06.388Z,1509409686.388 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:28:06.388Z,1509409686.388 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T00:28:06.758Z,1509409686.758 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:28:06.759Z,1509409686.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:28:06.759Z,1509409686.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:28:24.637Z,1509409704.637 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:28:35.406Z,1509409715.406 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002989
CHAN A1 (24V): -0.004304
CHAN A2 (12V): -0.002312
CHAN A3 (5V): 0.000174
CHAN B0 (3.3V): -0.000469
CHAN B1 (3.15aV): -0.000322
CHAN B2 (3.15bV): -0.000602
CHAN B3 (GND): 0.000149
OPEN: -0.000073
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:30:05.643Z,1509409805.643 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:30:16.387Z,1509409816.387 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133797
CHAN A1 (24V): -0.004753
CHAN A2 (12V): -0.002129
CHAN A3 (5V): -0.000126
CHAN B0 (3.3V): -0.000084
CHAN B1 (3.15aV): -0.000316
CHAN B2 (3.15bV): -0.000251
CHAN B3 (GND): -0.000447
OPEN: -0.000526
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:30:31.853Z,1509409831.853 [PNI_TCM](ERROR): CRC does not match. Expected:0x63802 got:0x41752
2017-10-31T00:30:45.436Z,1509409845.436 [PNI_TCM](ERROR): CRC does not match. Expected:0x45158 got:0x30607
2017-10-31T00:30:55.033Z,1509409855.033 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16541
2017-10-31T00:31:00.655Z,1509409860.655 [PNI_TCM](ERROR): CRC does not match. Expected:0x31179 got:0x44012
2017-10-31T00:31:07.054Z,1509409867.054 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:31:07.054Z,1509409867.054 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T00:31:07.054Z,1509409867.054 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:31:07.068Z,1509409867.068 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:31:07.488Z,1509409867.488 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:31:07.488Z,1509409867.488 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T00:31:07.862Z,1509409867.862 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:31:07.862Z,1509409867.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:31:07.862Z,1509409867.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:31:17.038Z,1509409877.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x6528 got:0x44678
2017-10-31T00:31:17.099Z,1509409877.099 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T00:26:16.7Z
2017-10-31T00:31:17.099Z,1509409877.099 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T00:31:17.099Z,1509409877.099 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T00:31:17.431Z,1509409877.431 [PNI_TCM](ERROR): CRC does not match. Expected:0x46528 got:0x2823
2017-10-31T00:31:21.964Z,1509409881.964 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0060.lzma
2017-10-31T00:31:22.709Z,1509409882.709 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0060.lzma.bak
2017-10-31T00:31:22.709Z,1509409882.709 [DataOverHttps](INFO): SBD MOMSN=5177490
2017-10-31T00:31:31.964Z,1509409891.964 [DataOverHttps](INFO): Sending 1768 bytes from file Logs/20171030T210256/Express0061.lzma
2017-10-31T00:31:32.732Z,1509409892.732 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0061.lzma.bak
2017-10-31T00:31:32.732Z,1509409892.732 [DataOverHttps](INFO): SBD MOMSN=5177492
2017-10-31T00:31:33.191Z,1509409893.191 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T00:31:33.191Z,1509409893.191 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T00:31:33.191Z,1509409893.191 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T00:31:46.801Z,1509409906.801 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:31:57.605Z,1509409917.605 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002080
CHAN A1 (24V): -0.004460
CHAN A2 (12V): -0.002356
CHAN A3 (5V): -0.000189
CHAN B0 (3.3V): 0.000260
CHAN B1 (3.15aV): -0.000338
CHAN B2 (3.15bV): -0.000338
CHAN B3 (GND): -0.000353
OPEN: -0.000565
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:32:20.719Z,1509409940.719 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T00:32:51.236Z,1509409971.236 [NAL9602](INFO): Powering down
2017-10-31T00:33:09.710Z,1509409989.710 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T00:33:27.763Z,1509410007.763 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:33:41.586Z,1509410021.586 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134531
CHAN A1 (24V): -0.004010
CHAN A2 (12V): -0.001671
CHAN A3 (5V): 0.000314
CHAN B0 (3.3V): 0.000161
CHAN B1 (3.15aV): -0.000366
CHAN B2 (3.15bV): -0.000302
CHAN B3 (GND): 0.000065
OPEN: -0.000486
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:34:07.975Z,1509410047.975 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:34:07.975Z,1509410047.975 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T00:34:07.976Z,1509410047.976 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:34:08.004Z,1509410048.004 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:34:08.379Z,1509410048.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:34:08.379Z,1509410048.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T00:34:08.815Z,1509410048.815 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:34:08.816Z,1509410048.816 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:34:08.820Z,1509410048.820 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:35:11.823Z,1509410111.823 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:35:22.728Z,1509410122.728 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134392
CHAN A1 (24V): -0.003686
CHAN A2 (12V): -0.002156
CHAN A3 (5V): 0.000191
CHAN B0 (3.3V): -0.000604
CHAN B1 (3.15aV): 0.000145
CHAN B2 (3.15bV): -0.000501
CHAN B3 (GND): 4.792929
OPEN: -0.000350
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:36:33.984Z,1509410193.984 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T00:36:33.984Z,1509410193.984 [Default:CheckIn:C.Wait] Stopped
2017-10-31T00:36:33.984Z,1509410193.984 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T00:36:33.984Z,1509410193.984 [Default:CheckIn:D] Running Loop=1
2017-10-31T00:36:34.374Z,1509410194.374 [Default:CheckIn:D] Stopped
2017-10-31T00:36:34.374Z,1509410194.374 [Default:CheckIn:E] Running Loop=1
2017-10-31T00:36:34.764Z,1509410194.764 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 119.444132 min 
2017-10-31T00:36:34.764Z,1509410194.764 [Default:CheckIn:E] Stopped
2017-10-31T00:36:34.765Z,1509410194.765 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T00:36:34.765Z,1509410194.765 [Default:CheckIn] Stopped
2017-10-31T00:36:34.765Z,1509410194.765 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T00:36:34.765Z,1509410194.765 [Default:CheckIn](INFO): Running loop #7
2017-10-31T00:36:34.765Z,1509410194.765 [Default:CheckIn] Running Loop=7
2017-10-31T00:36:34.765Z,1509410194.765 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T00:36:34.765Z,1509410194.765 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T00:36:38.136Z,1509410198.136 [NAL9602](INFO): Powering up
2017-10-31T00:36:49.291Z,1509410209.291 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:36:52.963Z,1509410212.963 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:37:03.760Z,1509410223.760 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002025
CHAN A1 (24V): -0.003985
CHAN A2 (12V): -0.002247
CHAN A3 (5V): 0.000138
CHAN B0 (3.3V): -0.000148
CHAN B1 (3.15aV): 0.000117
CHAN B2 (3.15bV): -0.000875
CHAN B3 (GND): -0.000621
OPEN: -0.000503
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:37:08.923Z,1509410228.923 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:37:08.923Z,1509410228.923 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T00:37:08.923Z,1509410228.923 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:37:08.973Z,1509410228.973 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:37:09.358Z,1509410229.358 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:37:09.358Z,1509410229.358 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T00:37:09.734Z,1509410229.734 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:37:09.739Z,1509410229.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:37:09.739Z,1509410229.739 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:37:21.284Z,1509410241.284 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T00:37:21.365Z,1509410241.365 [NAL9602](FAULT): received: 
+CSQ:0

OK02, 2, 0, 0, 0

OK
2017-10-31T00:37:21.365Z,1509410241.365 [NAL9602] Data Fault, FailCount= 3
2017-10-31T00:37:21.365Z,1509410241.365 [NAL9602](ERROR): Data Fault
2017-10-31T00:37:21.475Z,1509410241.475 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T00:37:21.686Z,1509410241.686 [NAL9602](INFO): Powering down
2017-10-31T00:37:22.553Z,1509410242.553 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T00:37:22.554Z,1509410242.554 [NAL9602] No Fault, FailCount= 3
2017-10-31T00:37:52.006Z,1509410272.006 [NAL9602](INFO): Powering up NAL9602
2017-10-31T00:38:02.808Z,1509410282.808 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:38:03.609Z,1509410283.609 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T00:38:03.609Z,1509410283.609 [NAL9602] Data Fault, FailCount= 4
2017-10-31T00:38:03.609Z,1509410283.609 [NAL9602](ERROR): Data Fault
2017-10-31T00:38:03.700Z,1509410283.700 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T00:38:04.005Z,1509410284.005 [NAL9602](INFO): Powering down
2017-10-31T00:38:04.891Z,1509410284.891 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T00:38:04.891Z,1509410284.891 [NAL9602] No Fault, FailCount= 4
2017-10-31T00:38:34.013Z,1509410314.013 [NAL9602](INFO): Powering up NAL9602
2017-10-31T00:38:34.075Z,1509410314.075 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:38:44.986Z,1509410324.986 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:38:48.262Z,1509410328.262 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133341
CHAN A1 (24V): -0.004671
CHAN A2 (12V): -0.002489
CHAN A3 (5V): 0.000223
CHAN B0 (3.3V): -0.000095
CHAN B1 (3.15aV): 4.767929
CHAN B2 (3.15bV): -0.000540
CHAN B3 (GND): 0.000499
OPEN: -0.000230
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:40:06.386Z,1509410406.386 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T00:40:06.387Z,1509410406.387 [BPC1] Data Fault, FailCount= 1
2017-10-31T00:40:06.387Z,1509410406.387 [BPC1](ERROR): Data Fault
2017-10-31T00:40:06.410Z,1509410406.410 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T00:40:07.601Z,1509410407.601 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:40:07.602Z,1509410407.602 [BPC1] No Fault, FailCount= 1
2017-10-31T00:40:09.974Z,1509410409.974 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:40:09.974Z,1509410409.974 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T00:40:09.974Z,1509410409.974 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:40:09.989Z,1509410409.989 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:40:10.405Z,1509410410.405 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:40:10.406Z,1509410410.406 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T00:40:10.792Z,1509410410.792 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:40:10.793Z,1509410410.793 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:40:10.793Z,1509410410.793 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:40:18.412Z,1509410418.412 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:40:29.219Z,1509410429.219 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.001962
CHAN A1 (24V): -0.004424
CHAN A2 (12V): -0.002200
CHAN A3 (5V): 0.000218
CHAN B0 (3.3V): -0.000246
CHAN B1 (3.15aV): 0.000431
CHAN B2 (3.15bV): 0.000116
CHAN B3 (GND): -0.000174
OPEN: -0.000386
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:41:35.018Z,1509410495.018 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T00:36:34.8Z
2017-10-31T00:41:35.018Z,1509410495.018 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T00:41:35.018Z,1509410495.018 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T00:41:39.402Z,1509410499.402 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0064.lzma
2017-10-31T00:41:40.160Z,1509410500.160 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0064.lzma.bak
2017-10-31T00:41:40.160Z,1509410500.160 [DataOverHttps](INFO): SBD MOMSN=5177572
2017-10-31T00:41:49.803Z,1509410509.803 [DataOverHttps](INFO): Sending 683 bytes from file Logs/20171030T210256/Express0065.lzma
2017-10-31T00:41:50.541Z,1509410510.541 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0065.lzma.bak
2017-10-31T00:41:50.541Z,1509410510.541 [DataOverHttps](INFO): SBD MOMSN=5177574
2017-10-31T00:41:51.003Z,1509410511.003 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T00:41:51.003Z,1509410511.003 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T00:41:51.004Z,1509410511.004 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T00:41:54.817Z,1509410514.817 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T00:41:59.385Z,1509410519.385 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:42:10.189Z,1509410530.189 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002324
CHAN A1 (24V): -0.004672
CHAN A2 (12V): -0.002504
CHAN A3 (5V): 0.000292
CHAN B0 (3.3V): -0.000458
CHAN B1 (3.15aV): -0.000055
CHAN B2 (3.15bV): -0.000198
CHAN B3 (GND): -0.000350
OPEN: -0.000347
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:42:25.319Z,1509410545.319 [NAL9602](INFO): Powering down
2017-10-31T00:42:48.936Z,1509410568.936 [BPC1](ERROR): Failed to receive battery data
2017-10-31T00:42:48.936Z,1509410568.936 [BPC1] Communications Fault, FailCount= 1
2017-10-31T00:42:48.936Z,1509410568.936 [BPC1](ERROR): Communications Fault
2017-10-31T00:42:48.967Z,1509410568.967 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T00:42:50.167Z,1509410570.167 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:42:50.168Z,1509410570.168 [BPC1] No Fault, FailCount= 1
2017-10-31T00:43:09.715Z,1509410589.715 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T00:43:10.877Z,1509410590.877 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:43:10.877Z,1509410590.877 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T00:43:10.877Z,1509410590.877 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:43:10.890Z,1509410590.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:43:11.277Z,1509410591.277 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:43:11.277Z,1509410591.277 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T00:43:11.693Z,1509410591.693 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:43:11.694Z,1509410591.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:43:11.694Z,1509410591.694 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:43:40.485Z,1509410620.485 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:43:51.376Z,1509410631.376 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003536
CHAN A1 (24V): -0.003176
CHAN A2 (12V): -0.002018
CHAN A3 (5V): 0.000189
CHAN B0 (3.3V): -0.000433
CHAN B1 (3.15aV): 0.000258
CHAN B2 (3.15bV): -0.000401
CHAN B3 (GND): 0.000034
OPEN: -0.000247
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:45:21.401Z,1509410721.401 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:45:32.198Z,1509410732.198 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134863
CHAN A1 (24V): -0.003185
CHAN A2 (12V): -0.002279
CHAN A3 (5V): 0.000423
CHAN B0 (3.3V): 0.000029
CHAN B1 (3.15aV): -0.000135
CHAN B2 (3.15bV): -0.000629
CHAN B3 (GND): -0.000163
OPEN: -0.000629
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:46:11.995Z,1509410771.995 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:46:11.996Z,1509410771.996 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T00:46:11.996Z,1509410771.996 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:46:12.033Z,1509410772.033 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:46:12.433Z,1509410772.433 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:46:12.433Z,1509410772.433 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T00:46:12.800Z,1509410772.800 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:46:12.800Z,1509410772.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:46:12.801Z,1509410772.801 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:46:51.606Z,1509410811.606 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T00:46:51.606Z,1509410811.606 [Default:CheckIn:C.Wait] Stopped
2017-10-31T00:46:51.606Z,1509410811.606 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T00:46:51.607Z,1509410811.607 [Default:CheckIn:D] Running Loop=1
2017-10-31T00:46:52.001Z,1509410812.001 [Default:CheckIn:D] Stopped
2017-10-31T00:46:52.001Z,1509410812.001 [Default:CheckIn:E] Running Loop=1
2017-10-31T00:46:52.403Z,1509410812.403 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 129.738118 min 
2017-10-31T00:46:52.403Z,1509410812.403 [Default:CheckIn:E] Stopped
2017-10-31T00:46:52.404Z,1509410812.404 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T00:46:52.404Z,1509410812.404 [Default:CheckIn] Stopped
2017-10-31T00:46:52.404Z,1509410812.404 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T00:46:52.404Z,1509410812.404 [Default:CheckIn](INFO): Running loop #8
2017-10-31T00:46:52.404Z,1509410812.404 [Default:CheckIn] Running Loop=8
2017-10-31T00:46:52.404Z,1509410812.404 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T00:46:52.404Z,1509410812.404 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T00:46:56.019Z,1509410816.019 [NAL9602](INFO): Powering up
2017-10-31T00:47:02.589Z,1509410822.589 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:47:06.917Z,1509410826.917 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:47:13.387Z,1509410833.387 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002731
CHAN A1 (24V): -0.003907
CHAN A2 (12V): -0.001711
CHAN A3 (5V): 0.000636
CHAN B0 (3.3V): -0.000490
CHAN B1 (3.15aV): -0.000158
CHAN B2 (3.15bV): -0.000498
CHAN B3 (GND): -0.000636
OPEN: -0.000082
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:47:38.923Z,1509410858.923 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T00:47:38.997Z,1509410858.997 [NAL9602](FAULT): received: 
+CSQ:0

OK02, 2, 0, 0, 0

OK
2017-10-31T00:47:38.997Z,1509410858.997 [NAL9602] Data Fault, FailCount= 5
2017-10-31T00:47:38.997Z,1509410858.997 [NAL9602](ERROR): Data Fault
2017-10-31T00:47:39.107Z,1509410859.107 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T00:47:39.107Z,1509410859.107 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T00:47:39.315Z,1509410859.315 [NAL9602](INFO): Powering down
2017-10-31T00:47:39.402Z,1509410859.402 [CommandLine](FAULT): Scheduling is paused
2017-10-31T00:47:39.403Z,1509410859.403 [CBIT](INFO): Critical error at 20171031T004739
2017-10-31T00:48:43.608Z,1509410923.608 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:48:56.667Z,1509410936.667 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134868
CHAN A1 (24V): -0.003143
CHAN A2 (12V): -0.002282
CHAN A3 (5V): 0.000179
CHAN B0 (3.3V): 0.000599
CHAN B1 (3.15aV): 0.000107
CHAN B2 (3.15bV): -0.000054
CHAN B3 (GND): 0.000068
OPEN: -0.000370
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:49:13.024Z,1509410953.024 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:49:13.024Z,1509410953.024 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T00:49:13.024Z,1509410953.024 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:49:13.037Z,1509410953.037 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:49:13.475Z,1509410953.475 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:49:13.475Z,1509410953.475 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T00:49:13.818Z,1509410953.818 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:49:13.818Z,1509410953.818 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:49:13.819Z,1509410953.819 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:49:39.018Z,1509410979.018 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T00:49:39.018Z,1509410979.018 [NAL9602] No Fault, FailCount= 5
2017-10-31T00:49:39.365Z,1509410979.365 [NAL9602](INFO): Powering up NAL9602
2017-10-31T00:49:50.575Z,1509410990.575 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:49:51.376Z,1509410991.376 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T00:49:51.376Z,1509410991.376 [NAL9602] Data Fault, FailCount= 1
2017-10-31T00:49:51.376Z,1509410991.376 [NAL9602](ERROR): Data Fault
2017-10-31T00:49:51.483Z,1509410991.483 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T00:49:51.768Z,1509410991.768 [NAL9602](INFO): Powering down
2017-10-31T00:49:52.625Z,1509410992.625 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T00:49:52.625Z,1509410992.625 [NAL9602] No Fault, FailCount= 1
2017-10-31T00:50:21.889Z,1509411021.889 [NAL9602](INFO): Powering up NAL9602
2017-10-31T00:50:26.749Z,1509411026.749 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:50:33.091Z,1509411033.091 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:50:37.556Z,1509411037.556 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002133
CHAN A1 (24V): -0.004621
CHAN A2 (12V): -0.002329
CHAN A3 (5V): 0.000426
CHAN B0 (3.3V): -0.000464
CHAN B1 (3.15aV): -0.000249
CHAN B2 (3.15bV): -0.000599
CHAN B3 (GND): -0.000066
OPEN: -0.000629
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:51:52.733Z,1509411112.733 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T00:46:52.4Z
2017-10-31T00:51:52.733Z,1509411112.733 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T00:51:52.733Z,1509411112.733 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T00:51:57.541Z,1509411117.541 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171030T210256/Courier0068.lzma
2017-10-31T00:51:58.310Z,1509411118.310 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0068.lzma.bak
2017-10-31T00:51:58.310Z,1509411118.310 [DataOverHttps](INFO): SBD MOMSN=5177592
2017-10-31T00:52:07.585Z,1509411127.585 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:52:07.651Z,1509411127.651 [DataOverHttps](INFO): Sending 696 bytes from file Logs/20171030T210256/Express0069.lzma
2017-10-31T00:52:08.402Z,1509411128.402 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0069.lzma.bak
2017-10-31T00:52:08.402Z,1509411128.402 [DataOverHttps](INFO): SBD MOMSN=5177595
2017-10-31T00:52:08.890Z,1509411128.890 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T00:52:08.890Z,1509411128.890 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T00:52:08.890Z,1509411128.890 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T00:52:14.102Z,1509411134.102 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:52:14.102Z,1509411134.102 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T00:52:14.103Z,1509411134.103 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:52:14.116Z,1509411134.116 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:52:14.518Z,1509411134.518 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T00:52:14.518Z,1509411134.518 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T00:52:14.891Z,1509411134.891 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T00:52:14.891Z,1509411134.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T00:52:14.892Z,1509411134.892 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T00:52:20.056Z,1509411140.056 [NAL9602](INFO): SBD MO Status=0, MOMSN=3302, MT Status=0, MTMSN=0
2017-10-31T00:52:20.056Z,1509411140.056 [NAL9602](INFO): No messages in MT queue
2017-10-31T00:52:20.933Z,1509411140.933 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133742
CHAN A1 (24V): -0.004807
CHAN A2 (12V): -0.002088
CHAN A3 (5V): 0.000100
CHAN B0 (3.3V): -0.000127
CHAN B1 (3.15aV): -0.000414
CHAN B2 (3.15bV): -0.000608
CHAN B3 (GND): -0.000104
OPEN: -0.000307
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:52:31.290Z,1509411151.290 [BPC1](ERROR): Failed to receive battery data
2017-10-31T00:52:31.290Z,1509411151.290 [BPC1] Communications Fault, FailCount= 1
2017-10-31T00:52:31.290Z,1509411151.290 [BPC1](ERROR): Communications Fault
2017-10-31T00:52:31.331Z,1509411151.331 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T00:52:32.523Z,1509411152.523 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:52:32.523Z,1509411152.523 [BPC1] No Fault, FailCount= 1
2017-10-31T00:52:50.863Z,1509411170.863 [NAL9602](INFO): Powering down
2017-10-31T00:53:12.603Z,1509411192.603 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T00:53:51.110Z,1509411231.110 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:54:01.887Z,1509411241.887 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003477
CHAN A1 (24V): -0.003623
CHAN A2 (12V): -0.001867
CHAN A3 (5V): 0.000603
CHAN B0 (3.3V): 0.000220
CHAN B1 (3.15aV): -0.000576
CHAN B2 (3.15bV): 0.000666
CHAN B3 (GND): 0.000002
OPEN: -0.000644
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:55:15.043Z,1509411315.043 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T00:55:15.043Z,1509411315.043 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T00:55:15.043Z,1509411315.043 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T00:55:15.093Z,1509411315.093 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:55:15.093Z,1509411315.093 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T00:55:32.257Z,1509411332.257 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:55:43.050Z,1509411343.050 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002940
CHAN A1 (24V): -0.003959
CHAN A2 (12V): -0.002368
CHAN A3 (5V): 0.000474
CHAN B0 (3.3V): -0.000096
CHAN B1 (3.15aV): -0.000719
CHAN B2 (3.15bV): -0.000089
CHAN B3 (GND): 0.000126
OPEN: -0.000112
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:56:06.214Z,1509411366.214 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T00:56:06.214Z,1509411366.214 [BPC1] Data Fault, FailCount= 1
2017-10-31T00:56:06.214Z,1509411366.214 [BPC1](ERROR): Data Fault
2017-10-31T00:56:06.284Z,1509411366.284 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T00:56:07.456Z,1509411367.456 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T00:56:07.456Z,1509411367.456 [BPC1] No Fault, FailCount= 1
2017-10-31T00:57:09.358Z,1509411429.358 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T00:57:09.359Z,1509411429.359 [Default:CheckIn:C.Wait] Stopped
2017-10-31T00:57:09.359Z,1509411429.359 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T00:57:09.360Z,1509411429.360 [Default:CheckIn:D] Running Loop=1
2017-10-31T00:57:09.769Z,1509411429.769 [Default:CheckIn:D] Stopped
2017-10-31T00:57:09.769Z,1509411429.769 [Default:CheckIn:E] Running Loop=1
2017-10-31T00:57:10.165Z,1509411430.165 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 140.034261 min 
2017-10-31T00:57:10.165Z,1509411430.165 [Default:CheckIn:E] Stopped
2017-10-31T00:57:10.165Z,1509411430.165 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T00:57:10.165Z,1509411430.165 [Default:CheckIn] Stopped
2017-10-31T00:57:10.165Z,1509411430.165 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T00:57:10.165Z,1509411430.165 [Default:CheckIn](INFO): Running loop #9
2017-10-31T00:57:10.165Z,1509411430.165 [Default:CheckIn] Running Loop=9
2017-10-31T00:57:10.166Z,1509411430.166 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T00:57:10.166Z,1509411430.166 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T00:57:13.529Z,1509411433.529 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:57:13.583Z,1509411433.583 [NAL9602](INFO): Powering up
2017-10-31T00:57:24.013Z,1509411444.013 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134474
CHAN A1 (24V): -0.003626
CHAN A2 (12V): -0.002051
CHAN A3 (5V): 0.000533
CHAN B0 (3.3V): -0.000115
CHAN B1 (3.15aV): -0.000004
CHAN B2 (3.15bV): 0.000257
CHAN B3 (GND): -0.000103
OPEN: -0.000365
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T00:57:24.759Z,1509411444.759 [NAL9602](INFO): NAL9602 initialized
2017-10-31T00:58:24.677Z,1509411504.677 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T00:58:54.291Z,1509411534.291 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T00:59:05.151Z,1509411545.151 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003141
CHAN A1 (24V): -0.004182
CHAN A2 (12V): -0.002188
CHAN A3 (5V): 0.000214
CHAN B0 (3.3V): 0.000353
CHAN B1 (3.15aV): -0.000484
CHAN B2 (3.15bV): -0.000372
CHAN B3 (GND): -0.000222
OPEN: -0.000215
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:00:35.356Z,1509411635.356 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:00:46.066Z,1509411646.066 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134477
CHAN A1 (24V): -0.003764
CHAN A2 (12V): -0.002107
CHAN A3 (5V): -0.000315
CHAN B0 (3.3V): -0.000180
CHAN B1 (3.15aV): -0.000757
CHAN B2 (3.15bV): 0.000087
CHAN B3 (GND): -0.000133
OPEN: -0.000559
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:01:02.811Z,1509411662.811 [NAL9602](INFO): SBD MO Status=0, MOMSN=3303, MT Status=0, MTMSN=0
2017-10-31T01:01:02.811Z,1509411662.811 [NAL9602](INFO): No messages in MT queue
2017-10-31T01:01:02.811Z,1509411662.811 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2017-10-31T01:01:03.603Z,1509411663.603 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T01:01:03.603Z,1509411663.603 [NAL9602] Data Fault, FailCount= 1
2017-10-31T01:01:03.603Z,1509411663.603 [NAL9602](ERROR): Data Fault
2017-10-31T01:01:03.662Z,1509411663.662 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T01:01:04.009Z,1509411664.009 [NAL9602](INFO): Powering down
2017-10-31T01:01:04.880Z,1509411664.880 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T01:01:04.880Z,1509411664.880 [NAL9602] No Fault, FailCount= 1
2017-10-31T01:01:34.215Z,1509411694.215 [NAL9602](INFO): Powering up NAL9602
2017-10-31T01:01:45.040Z,1509411705.040 [NAL9602](INFO): NAL9602 initialized
2017-10-31T01:02:03.442Z,1509411723.442 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T01:02:03.442Z,1509411723.442 [BPC1] Data Fault, FailCount= 1
2017-10-31T01:02:03.442Z,1509411723.442 [BPC1](ERROR): Data Fault
2017-10-31T01:02:03.523Z,1509411723.523 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T01:02:04.693Z,1509411724.693 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:02:04.693Z,1509411724.693 [BPC1] No Fault, FailCount= 1
2017-10-31T01:02:10.285Z,1509411730.285 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T00:57:10.2Z
2017-10-31T01:02:10.285Z,1509411730.285 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T01:02:10.285Z,1509411730.285 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T01:02:15.031Z,1509411735.031 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0072.lzma
2017-10-31T01:02:15.782Z,1509411735.782 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0072.lzma.bak
2017-10-31T01:02:15.782Z,1509411735.782 [DataOverHttps](INFO): SBD MOMSN=5177615
2017-10-31T01:02:16.326Z,1509411736.326 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:02:27.091Z,1509411747.091 [DataOverHttps](INFO): Sending 650 bytes from file Logs/20171030T210256/Express0073.lzma
2017-10-31T01:02:27.890Z,1509411747.890 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0073.lzma.bak
2017-10-31T01:02:27.890Z,1509411747.890 [DataOverHttps](INFO): SBD MOMSN=5177617
2017-10-31T01:02:28.348Z,1509411748.348 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T01:02:28.348Z,1509411748.348 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T01:02:28.348Z,1509411748.348 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T01:02:32.098Z,1509411752.098 [BPC1](ERROR): Failed to receive battery data
2017-10-31T01:02:32.098Z,1509411752.098 [BPC1] Communications Fault, FailCount= 2
2017-10-31T01:02:32.098Z,1509411752.098 [BPC1](ERROR): Communications Fault
2017-10-31T01:02:32.153Z,1509411752.153 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T01:02:33.112Z,1509411753.112 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:02:33.113Z,1509411753.113 [BPC1] No Fault, FailCount= 2
2017-10-31T01:02:36.317Z,1509411756.317 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002425
CHAN A1 (24V): -0.004147
CHAN A2 (12V): -0.002274
CHAN A3 (5V): 0.000029
CHAN B0 (3.3V): 0.000038
CHAN B1 (3.15aV): -0.000838
CHAN B2 (3.15bV): -0.000473
CHAN B3 (GND): 0.000153
OPEN: -0.000824
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:02:40.656Z,1509411760.656 [NAL9602](INFO): Powering down
2017-10-31T01:03:12.718Z,1509411792.718 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T01:04:06.497Z,1509411846.497 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:04:17.332Z,1509411857.332 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003053
CHAN A1 (24V): -0.003486
CHAN A2 (12V): -0.002615
CHAN A3 (5V): 0.000089
CHAN B0 (3.3V): -0.000180
CHAN B1 (3.15aV): 0.000269
CHAN B2 (3.15bV): -0.000464
CHAN B3 (GND): -0.000110
OPEN: -0.000307
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:05:47.384Z,1509411947.384 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:05:58.172Z,1509411958.172 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134415
CHAN A1 (24V): -0.003854
CHAN A2 (12V): -0.001997
CHAN A3 (5V): 0.000257
CHAN B0 (3.3V): 0.000008
CHAN B1 (3.15aV): -0.000222
CHAN B2 (3.15bV): 0.000033
CHAN B3 (GND): 0.000090
OPEN: -0.000106
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:07:28.520Z,1509412048.520 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:07:28.909Z,1509412048.909 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T01:07:28.909Z,1509412048.909 [Default:CheckIn:C.Wait] Stopped
2017-10-31T01:07:28.909Z,1509412048.909 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T01:07:28.909Z,1509412048.909 [Default:CheckIn:D] Running Loop=1
2017-10-31T01:07:29.309Z,1509412049.309 [Default:CheckIn:D] Stopped
2017-10-31T01:07:29.309Z,1509412049.309 [Default:CheckIn:E] Running Loop=1
2017-10-31T01:07:29.697Z,1509412049.697 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 150.359912 min 
2017-10-31T01:07:29.697Z,1509412049.697 [Default:CheckIn:E] Stopped
2017-10-31T01:07:29.697Z,1509412049.697 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T01:07:29.697Z,1509412049.697 [Default:CheckIn] Stopped
2017-10-31T01:07:29.697Z,1509412049.697 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T01:07:29.698Z,1509412049.698 [Default:CheckIn](INFO): Running loop #10
2017-10-31T01:07:29.698Z,1509412049.698 [Default:CheckIn] Running Loop=10
2017-10-31T01:07:29.698Z,1509412049.698 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T01:07:29.698Z,1509412049.698 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T01:07:33.308Z,1509412053.308 [NAL9602](INFO): Powering up
2017-10-31T01:07:35.930Z,1509412055.930 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T01:07:41.586Z,1509412061.586 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002771
CHAN A1 (24V): -0.003909
CHAN A2 (12V): -0.002060
CHAN A3 (5V): 0.000100
CHAN B0 (3.3V): -0.000239
CHAN B1 (3.15aV): -0.000008
CHAN B2 (3.15bV): -0.000684
CHAN B3 (GND): -0.000119
OPEN: -0.000379
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:07:44.292Z,1509412064.292 [NAL9602](INFO): NAL9602 initialized
2017-10-31T01:07:47.130Z,1509412067.130 [PNI_TCM](ERROR): CRC does not match. Expected:0x41130 got:0x58652
2017-10-31T01:07:53.537Z,1509412073.537 [PNI_TCM](ERROR): CRC does not match. Expected:0x47021 got:0x58314
2017-10-31T01:07:59.932Z,1509412079.932 [PNI_TCM](ERROR): CRC does not match. Expected:0x4111 got:0x97
2017-10-31T01:08:01.527Z,1509412081.527 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T01:08:09.529Z,1509412089.529 [PNI_TCM](ERROR): CRC does not match. Expected:0x55847 got:0x40761
2017-10-31T01:09:11.743Z,1509412151.743 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:09:22.528Z,1509412162.528 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135113
CHAN A1 (24V): -0.003726
CHAN A2 (12V): -0.002059
CHAN A3 (5V): 0.000192
CHAN B0 (3.3V): -0.000128
CHAN B1 (3.15aV): -0.000470
CHAN B2 (3.15bV): -0.000252
CHAN B3 (GND): -0.000224
OPEN: -0.000521
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:10:15.254Z,1509412215.254 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:10:15.255Z,1509412215.255 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T01:10:15.635Z,1509412215.635 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:10:15.635Z,1509412215.635 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:10:15.635Z,1509412215.635 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:10:16.829Z,1509412216.829 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T01:10:16.829Z,1509412216.829 [BPC1] Data Fault, FailCount= 1
2017-10-31T01:10:16.829Z,1509412216.829 [BPC1](ERROR): Data Fault
2017-10-31T01:10:16.881Z,1509412216.881 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T01:10:18.061Z,1509412218.061 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:10:18.061Z,1509412218.061 [BPC1] No Fault, FailCount= 1
2017-10-31T01:10:52.626Z,1509412252.626 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:10:57.760Z,1509412257.760 [NAL9602](INFO): SBD MO Status=2, MOMSN=3304, MT Status=2, MTMSN=0
2017-10-31T01:10:57.760Z,1509412257.760 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:11:03.473Z,1509412263.473 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002879
CHAN A1 (24V): -0.003806
CHAN A2 (12V): -0.002582
CHAN A3 (5V): 0.000236
CHAN B0 (3.3V): 0.000164
CHAN B1 (3.15aV): 0.000105
CHAN B2 (3.15bV): -0.000301
CHAN B3 (GND): -0.000436
OPEN: -0.000623
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:11:20.964Z,1509412280.964 [NAL9602](INFO): SBD MO Status=0, MOMSN=3304, MT Status=0, MTMSN=0
2017-10-31T01:11:20.964Z,1509412280.964 [NAL9602](INFO): No messages in MT queue
2017-10-31T01:11:22.161Z,1509412282.161 [NAL9602](INFO): GPS fix at 20171031T011119: (36.802696, -121.788048)
2017-10-31T01:11:22.218Z,1509412282.218 [DeadReckonWithRespectToSeafloor](INFO): Failure count cleared after critical for DeadReckonWithRespectToSeafloor
2017-10-31T01:11:22.225Z,1509412282.225 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T01:11:22.225Z,1509412282.225 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T01:11:26.895Z,1509412286.895 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20171030T210256/Courier0076.lzma
2017-10-31T01:11:27.683Z,1509412287.683 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0076.lzma.bak
2017-10-31T01:11:27.683Z,1509412287.683 [DataOverHttps](INFO): SBD MOMSN=5177635
2017-10-31T01:11:36.860Z,1509412296.860 [DataOverHttps](INFO): Sending 543 bytes from file Logs/20171030T210256/Express0077.lzma
2017-10-31T01:11:37.602Z,1509412297.602 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0077.lzma.bak
2017-10-31T01:11:37.603Z,1509412297.603 [DataOverHttps](INFO): SBD MOMSN=5177639
2017-10-31T01:11:38.064Z,1509412298.064 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T01:11:38.065Z,1509412298.065 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T01:11:38.065Z,1509412298.065 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T01:11:56.795Z,1509412316.795 [NAL9602](INFO): Powering down
2017-10-31T01:12:14.826Z,1509412334.826 [BPC1](ERROR): Failed to receive battery data
2017-10-31T01:12:14.826Z,1509412334.826 [BPC1] Communications Fault, FailCount= 1
2017-10-31T01:12:14.826Z,1509412334.826 [BPC1](ERROR): Communications Fault
2017-10-31T01:12:14.881Z,1509412334.881 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T01:12:16.045Z,1509412336.045 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:12:16.045Z,1509412336.045 [BPC1] No Fault, FailCount= 1
2017-10-31T01:12:33.670Z,1509412353.670 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:12:47.403Z,1509412367.403 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002714
CHAN A1 (24V): -0.004086
CHAN A2 (12V): -0.002182
CHAN A3 (5V): 0.000014
CHAN B0 (3.3V): -0.000411
CHAN B1 (3.15aV): -0.000402
CHAN B2 (3.15bV): -0.000261
CHAN B3 (GND): -0.000169
OPEN: -0.000571
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:13:13.021Z,1509412393.021 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T01:13:15.781Z,1509412395.781 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:13:15.782Z,1509412395.782 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T01:13:15.782Z,1509412395.782 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:13:15.807Z,1509412395.807 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:13:16.192Z,1509412396.192 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:13:16.192Z,1509412396.192 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T01:13:16.572Z,1509412396.572 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:13:16.573Z,1509412396.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:13:16.573Z,1509412396.573 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:13:50.345Z,1509412430.345 [PNI_TCM](ERROR): CRC does not match. Expected:0x52339 got:0x16194
2017-10-31T01:13:58.361Z,1509412438.361 [PNI_TCM](ERROR): CRC does not match. Expected:0x29790 got:0x6978
2017-10-31T01:13:59.942Z,1509412439.942 [PNI_TCM](ERROR): CRC does not match. Expected:0x42009 got:0x23127
2017-10-31T01:14:01.541Z,1509412441.541 [PNI_TCM](ERROR): CRC does not match. Expected:0x43516 got:0x31771
2017-10-31T01:14:11.138Z,1509412451.138 [PNI_TCM](ERROR): CRC does not match. Expected:0x45774 got:0x46105
2017-10-31T01:14:17.551Z,1509412457.551 [PNI_TCM](ERROR): CRC does not match. Expected:0x51256 got:0x43820
2017-10-31T01:14:17.589Z,1509412457.589 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:14:19.148Z,1509412459.148 [PNI_TCM](ERROR): CRC does not match. Expected:0x26430 got:0x6591
2017-10-31T01:14:27.142Z,1509412467.142 [PNI_TCM](ERROR): CRC does not match. Expected:0x30685 got:0x40563
2017-10-31T01:14:28.419Z,1509412468.419 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003341
CHAN A1 (24V): -0.003679
CHAN A2 (12V): -0.002157
CHAN A3 (5V): -0.000076
CHAN B0 (3.3V): -0.000843
CHAN B1 (3.15aV): -0.000491
CHAN B2 (3.15bV): 0.000107
CHAN B3 (GND): -0.000113
OPEN: -0.000700
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:14:33.544Z,1509412473.544 [PNI_TCM](ERROR): CRC does not match. Expected:0x49587 got:0x49068
2017-10-31T01:14:35.147Z,1509412475.147 [PNI_TCM](ERROR): CRC does not match. Expected:0x38829 got:0x13595
2017-10-31T01:15:58.791Z,1509412558.791 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:16:09.599Z,1509412569.599 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134889
CHAN A1 (24V): -0.003445
CHAN A2 (12V): -0.002241
CHAN A3 (5V): 0.000759
CHAN B0 (3.3V): -0.000495
CHAN B1 (3.15aV): -0.000007
CHAN B2 (3.15bV): -0.000007
CHAN B3 (GND): -0.000591
OPEN: -0.000206
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:16:16.793Z,1509412576.793 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:16:16.794Z,1509412576.794 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T01:16:16.794Z,1509412576.794 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:16:16.824Z,1509412576.824 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:16:17.253Z,1509412577.253 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:16:17.253Z,1509412577.253 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T01:16:17.599Z,1509412577.599 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:16:17.600Z,1509412577.600 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:16:17.600Z,1509412577.600 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:16:38.814Z,1509412598.814 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T01:16:38.814Z,1509412598.814 [Default:CheckIn:C.Wait] Stopped
2017-10-31T01:16:38.814Z,1509412598.814 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T01:16:38.815Z,1509412598.815 [Default:CheckIn:D] Running Loop=1
2017-10-31T01:16:39.207Z,1509412599.207 [Default:CheckIn:D] Stopped
2017-10-31T01:16:39.207Z,1509412599.207 [Default:CheckIn:E] Running Loop=1
2017-10-31T01:16:39.601Z,1509412599.601 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 159.524886 min 
2017-10-31T01:16:39.601Z,1509412599.601 [Default:CheckIn:E] Stopped
2017-10-31T01:16:39.601Z,1509412599.601 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T01:16:39.601Z,1509412599.601 [Default:CheckIn] Stopped
2017-10-31T01:16:39.602Z,1509412599.602 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T01:16:39.602Z,1509412599.602 [Default:CheckIn](INFO): Running loop #11
2017-10-31T01:16:39.602Z,1509412599.602 [Default:CheckIn] Running Loop=11
2017-10-31T01:16:39.602Z,1509412599.602 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T01:16:39.602Z,1509412599.602 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T01:16:42.996Z,1509412602.996 [NAL9602](INFO): Powering up
2017-10-31T01:16:54.166Z,1509412614.166 [NAL9602](INFO): NAL9602 initialized
2017-10-31T01:17:04.216Z,1509412624.216 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T01:17:04.217Z,1509412624.217 [BPC1] Data Fault, FailCount= 1
2017-10-31T01:17:04.217Z,1509412624.217 [BPC1](ERROR): Data Fault
2017-10-31T01:17:04.280Z,1509412624.280 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T01:17:05.431Z,1509412625.431 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:17:05.432Z,1509412625.432 [BPC1] No Fault, FailCount= 1
2017-10-31T01:17:39.849Z,1509412659.849 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:17:53.721Z,1509412673.721 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002637
CHAN A1 (24V): -0.004363
CHAN A2 (12V): -0.002035
CHAN A3 (5V): 0.000053
CHAN B0 (3.3V): -0.000228
CHAN B1 (3.15aV): 0.000582
CHAN B2 (3.15bV): -0.000540
CHAN B3 (GND): 0.000385
OPEN: -0.000329
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:18:26.069Z,1509412706.069 [NAL9602](INFO): SBD MO Status=2, MOMSN=3305, MT Status=2, MTMSN=0
2017-10-31T01:18:26.069Z,1509412706.069 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:19:17.664Z,1509412757.664 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:19:17.664Z,1509412757.664 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T01:19:17.664Z,1509412757.664 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:19:17.711Z,1509412757.711 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:19:18.123Z,1509412758.123 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:19:18.123Z,1509412758.123 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T01:19:18.484Z,1509412758.484 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:19:18.489Z,1509412758.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:19:18.489Z,1509412758.489 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:19:24.075Z,1509412764.075 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:19:34.867Z,1509412774.867 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134412
CHAN A1 (24V): -0.004309
CHAN A2 (12V): -0.001865
CHAN A3 (5V): 0.000480
CHAN B0 (3.3V): -0.000474
CHAN B1 (3.15aV): -0.000290
CHAN B2 (3.15bV): -0.000607
CHAN B3 (GND): 0.000565
OPEN: -0.000470
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:20:01.018Z,1509412801.018 [NAL9602](INFO): SBD MO Status=2, MOMSN=3305, MT Status=2, MTMSN=0
2017-10-31T01:20:01.019Z,1509412801.019 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:20:56.414Z,1509412856.414 [NAL9602](INFO): SBD MO Status=0, MOMSN=3305, MT Status=0, MTMSN=0
2017-10-31T01:20:56.414Z,1509412856.414 [NAL9602](INFO): No messages in MT queue
2017-10-31T01:20:57.618Z,1509412857.618 [NAL9602](INFO): GPS fix at 20171031T012056: (36.802748, -121.787946)
2017-10-31T01:20:57.681Z,1509412857.681 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T01:20:57.682Z,1509412857.682 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T01:21:02.282Z,1509412862.282 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20171030T210256/Courier0080.lzma
2017-10-31T01:21:03.072Z,1509412863.072 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0080.lzma.bak
2017-10-31T01:21:03.073Z,1509412863.073 [DataOverHttps](INFO): SBD MOMSN=5177655
2017-10-31T01:21:07.197Z,1509412867.197 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:21:12.273Z,1509412872.273 [DataOverHttps](INFO): Sending 512 bytes from file Logs/20171030T210256/Express0081.lzma
2017-10-31T01:21:13.076Z,1509412873.076 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0081.lzma.bak
2017-10-31T01:21:13.076Z,1509412873.076 [DataOverHttps](INFO): SBD MOMSN=5177658
2017-10-31T01:21:13.537Z,1509412873.537 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T01:21:13.537Z,1509412873.537 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T01:21:13.537Z,1509412873.537 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T01:21:22.847Z,1509412882.847 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002307
CHAN A1 (24V): -0.004168
CHAN A2 (12V): -0.002641
CHAN A3 (5V): 0.000176
CHAN B0 (3.3V): 0.000210
CHAN B1 (3.15aV): 0.000014
CHAN B2 (3.15bV): 0.000098
CHAN B3 (GND): 0.000118
OPEN: -0.000138
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:21:32.391Z,1509412892.391 [NAL9602](INFO): Powering down
2017-10-31T01:22:05.224Z,1509412925.224 [BPC1](ERROR): Failed to receive battery data
2017-10-31T01:22:05.224Z,1509412925.224 [BPC1] Communications Fault, FailCount= 1
2017-10-31T01:22:05.224Z,1509412925.224 [BPC1](ERROR): Communications Fault
2017-10-31T01:22:05.269Z,1509412925.269 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T01:22:06.483Z,1509412926.483 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:22:06.483Z,1509412926.483 [BPC1] No Fault, FailCount= 1
2017-10-31T01:22:18.609Z,1509412938.609 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:22:18.609Z,1509412938.609 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T01:22:18.609Z,1509412938.609 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:22:18.623Z,1509412938.623 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:22:19.081Z,1509412939.081 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:22:19.081Z,1509412939.081 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T01:22:19.415Z,1509412939.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:22:19.415Z,1509412939.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:22:19.415Z,1509412939.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:22:53.039Z,1509412973.039 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:23:03.816Z,1509412983.816 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135096
CHAN A1 (24V): -0.003512
CHAN A2 (12V): -0.002244
CHAN A3 (5V): 0.000448
CHAN B0 (3.3V): 0.000084
CHAN B1 (3.15aV): -0.000605
CHAN B2 (3.15bV): -0.000375
CHAN B3 (GND): -0.000678
OPEN: -0.000383
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:23:13.063Z,1509412993.063 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T01:23:24.753Z,1509413004.753 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T01:23:26.361Z,1509413006.361 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T01:23:27.965Z,1509413007.965 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T01:23:32.760Z,1509413012.760 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T01:23:35.959Z,1509413015.959 [PNI_TCM](ERROR): CRC does not match. Expected:0x57586 got:0x53872
2017-10-31T01:23:37.563Z,1509413017.563 [PNI_TCM](ERROR): CRC does not match. Expected:0x8670 got:0x49330
2017-10-31T01:23:45.557Z,1509413025.557 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T01:23:47.160Z,1509413027.160 [PNI_TCM](ERROR): CRC does not match. Expected:0x47165 got:0x49329
2017-10-31T01:23:48.764Z,1509413028.764 [PNI_TCM](ERROR): CRC does not match. Expected:0x2600 got:0x54526
2017-10-31T01:23:53.553Z,1509413033.553 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T01:23:53.953Z,1509413033.953 [PNI_TCM](ERROR): CRC does not match. Expected:0x34888 got:0x16384
2017-10-31T01:23:55.162Z,1509413035.162 [PNI_TCM](ERROR): CRC does not match. Expected:0x46347 got:0x45286
2017-10-31T01:23:56.761Z,1509413036.761 [PNI_TCM](ERROR): CRC does not match. Expected:0x37982 got:0x44079
2017-10-31T01:24:01.565Z,1509413041.565 [PNI_TCM](ERROR): CRC does not match. Expected:0x23235 got:0x10970
2017-10-31T01:24:09.955Z,1509413049.955 [PNI_TCM](ERROR): CRC does not match. Expected:0x23811 got:0x13
2017-10-31T01:24:12.756Z,1509413052.756 [PNI_TCM](ERROR): CRC does not match. Expected:0x29756 got:0x55928
2017-10-31T01:24:14.362Z,1509413054.362 [PNI_TCM](ERROR): CRC does not match. Expected:0x28459 got:0x16815
2017-10-31T01:24:33.932Z,1509413073.932 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:24:41.474Z,1509413081.474 [BPC1](ERROR): Failed to receive battery data
2017-10-31T01:24:41.474Z,1509413081.474 [BPC1] Communications Fault, FailCount= 1
2017-10-31T01:24:41.474Z,1509413081.474 [BPC1](ERROR): Communications Fault
2017-10-31T01:24:41.529Z,1509413081.529 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T01:24:42.700Z,1509413082.700 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:24:42.700Z,1509413082.700 [BPC1] No Fault, FailCount= 1
2017-10-31T01:24:44.715Z,1509413084.715 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003028
CHAN A1 (24V): -0.003514
CHAN A2 (12V): -0.002436
CHAN A3 (5V): 0.000147
CHAN B0 (3.3V): -0.000452
CHAN B1 (3.15aV): -0.000572
CHAN B2 (3.15bV): -0.000145
CHAN B3 (GND): 0.000323
OPEN: -0.000348
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:25:19.434Z,1509413119.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:25:19.434Z,1509413119.434 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T01:25:19.434Z,1509413119.434 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:25:19.468Z,1509413119.468 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:25:19.856Z,1509413119.856 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:25:19.856Z,1509413119.856 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T01:25:20.210Z,1509413120.210 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:25:20.211Z,1509413120.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:25:20.211Z,1509413120.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:26:14.222Z,1509413174.222 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T01:26:14.222Z,1509413174.222 [Default:CheckIn:C.Wait] Stopped
2017-10-31T01:26:14.222Z,1509413174.222 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T01:26:14.222Z,1509413174.222 [Default:CheckIn:D] Running Loop=1
2017-10-31T01:26:14.628Z,1509413174.628 [Default:CheckIn:D] Stopped
2017-10-31T01:26:14.629Z,1509413174.629 [Default:CheckIn:E] Running Loop=1
2017-10-31T01:26:15.036Z,1509413175.036 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 169.115234 min 
2017-10-31T01:26:15.037Z,1509413175.037 [Default:CheckIn:E] Stopped
2017-10-31T01:26:15.037Z,1509413175.037 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T01:26:15.037Z,1509413175.037 [Default:CheckIn] Stopped
2017-10-31T01:26:15.037Z,1509413175.037 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T01:26:15.037Z,1509413175.037 [Default:CheckIn](INFO): Running loop #12
2017-10-31T01:26:15.037Z,1509413175.037 [Default:CheckIn] Running Loop=12
2017-10-31T01:26:15.037Z,1509413175.037 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T01:26:15.037Z,1509413175.037 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T01:26:15.060Z,1509413175.060 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:26:18.368Z,1509413178.368 [NAL9602](INFO): Powering up
2017-10-31T01:26:28.781Z,1509413188.781 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134119
CHAN A1 (24V): -0.004615
CHAN A2 (12V): -0.002001
CHAN A3 (5V): 0.000489
CHAN B0 (3.3V): -0.000010
CHAN B1 (3.15aV): -0.000987
CHAN B2 (3.15bV): -0.000332
CHAN B3 (GND): -0.000636
OPEN: -0.000306
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:26:29.511Z,1509413189.511 [NAL9602](INFO): NAL9602 initialized
2017-10-31T01:27:00.764Z,1509413220.764 [PNI_TCM](ERROR): CRC does not match. Expected:0x35263 got:0x46617
2017-10-31T01:27:01.545Z,1509413221.545 [PNI_TCM](ERROR): CRC does not match. Expected:0x7771 got:0x29008
2017-10-31T01:27:59.116Z,1509413279.116 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:28:09.936Z,1509413289.936 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003104
CHAN A1 (24V): -0.004238
CHAN A2 (12V): -0.002457
CHAN A3 (5V): 0.000491
CHAN B0 (3.3V): -0.000272
CHAN B1 (3.15aV): -0.000204
CHAN B2 (3.15bV): -0.000223
CHAN B3 (GND): -0.000197
OPEN: -0.000218
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:28:20.253Z,1509413300.253 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:28:20.257Z,1509413300.257 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T01:28:20.257Z,1509413300.257 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:28:20.282Z,1509413300.282 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:28:20.683Z,1509413300.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:28:20.683Z,1509413300.683 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T01:28:21.081Z,1509413301.081 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:28:21.081Z,1509413301.081 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:28:21.082Z,1509413301.082 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:28:57.795Z,1509413337.795 [NAL9602](INFO): SBD MO Status=2, MOMSN=3306, MT Status=2, MTMSN=0
2017-10-31T01:28:57.795Z,1509413337.795 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:29:15.804Z,1509413355.804 [NAL9602](INFO): SBD MO Status=2, MOMSN=3306, MT Status=2, MTMSN=0
2017-10-31T01:29:15.804Z,1509413355.804 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:29:37.185Z,1509413377.185 [NAL9602](INFO): SBD MO Status=2, MOMSN=3306, MT Status=2, MTMSN=0
2017-10-31T01:29:37.186Z,1509413377.186 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:29:40.077Z,1509413380.077 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:29:50.882Z,1509413390.882 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134444
CHAN A1 (24V): -0.003963
CHAN A2 (12V): -0.002200
CHAN A3 (5V): 0.000274
CHAN B0 (3.3V): -0.000549
CHAN B1 (3.15aV): -0.000178
CHAN B2 (3.15bV): 0.000037
CHAN B3 (GND): -0.000333
OPEN: -0.000401
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:29:54.410Z,1509413394.410 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T01:29:54.410Z,1509413394.410 [BPC1] Data Fault, FailCount= 1
2017-10-31T01:29:54.410Z,1509413394.410 [BPC1](ERROR): Data Fault
2017-10-31T01:29:54.489Z,1509413394.489 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T01:29:55.653Z,1509413395.653 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:29:55.653Z,1509413395.653 [BPC1] No Fault, FailCount= 1
2017-10-31T01:30:33.795Z,1509413433.795 [NAL9602](INFO): SBD MO Status=2, MOMSN=3306, MT Status=2, MTMSN=0
2017-10-31T01:30:33.795Z,1509413433.795 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:30:49.400Z,1509413449.400 [NAL9602](INFO): SBD MO Status=2, MOMSN=3306, MT Status=2, MTMSN=0
2017-10-31T01:30:49.400Z,1509413449.400 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:31:03.016Z,1509413463.016 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T01:31:03.016Z,1509413463.016 [BPC1] Data Fault, FailCount= 1
2017-10-31T01:31:03.016Z,1509413463.016 [BPC1](ERROR): Data Fault
2017-10-31T01:31:03.088Z,1509413463.088 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T01:31:04.272Z,1509413464.272 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:31:04.273Z,1509413464.273 [BPC1] No Fault, FailCount= 1
2017-10-31T01:31:07.006Z,1509413467.006 [NAL9602](INFO): SBD MO Status=2, MOMSN=3306, MT Status=2, MTMSN=0
2017-10-31T01:31:07.006Z,1509413467.006 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:31:15.046Z,1509413475.046 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T01:26:15.0Z
2017-10-31T01:31:15.046Z,1509413475.046 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T01:31:15.047Z,1509413475.047 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T01:31:19.661Z,1509413479.661 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0084.lzma
2017-10-31T01:31:20.789Z,1509413480.789 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0084.lzma.bak
2017-10-31T01:31:20.789Z,1509413480.789 [DataOverHttps](INFO): SBD MOMSN=5177672
2017-10-31T01:31:20.904Z,1509413480.904 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:31:21.246Z,1509413481.246 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:31:21.246Z,1509413481.246 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T01:31:21.246Z,1509413481.246 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:31:21.307Z,1509413481.307 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:31:21.669Z,1509413481.669 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:31:21.669Z,1509413481.669 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T01:31:24.985Z,1509413484.985 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:31:24.986Z,1509413484.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:31:24.986Z,1509413484.986 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:31:30.181Z,1509413490.181 [DataOverHttps](INFO): Sending 550 bytes from file Logs/20171030T210256/Express0085.lzma
2017-10-31T01:31:30.986Z,1509413490.986 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0085.lzma.bak
2017-10-31T01:31:30.986Z,1509413490.986 [DataOverHttps](INFO): SBD MOMSN=5177674
2017-10-31T01:31:31.444Z,1509413491.444 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T01:31:31.444Z,1509413491.444 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T01:31:31.444Z,1509413491.444 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T01:31:35.074Z,1509413495.074 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T01:31:39.363Z,1509413499.363 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133854
CHAN A1 (24V): -0.004803
CHAN A2 (12V): -0.002051
CHAN A3 (5V): -0.000148
CHAN B0 (3.3V): 0.000035
CHAN B1 (3.15aV): -0.000378
CHAN B2 (3.15bV): -0.000448
CHAN B3 (GND): 0.000645
OPEN: -0.000698
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:32:05.293Z,1509413525.293 [NAL9602](INFO): Powering down
2017-10-31T01:33:06.691Z,1509413586.691 [BPC1](ERROR): Failed to parse message.
2017-10-31T01:33:06.691Z,1509413586.691 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T01:33:06.691Z,1509413586.691 [BPC1] Data Fault, FailCount= 1
2017-10-31T01:33:06.691Z,1509413586.691 [BPC1](ERROR): Data Fault
2017-10-31T01:33:06.719Z,1509413586.719 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T01:33:07.923Z,1509413587.923 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:33:07.923Z,1509413587.923 [BPC1] No Fault, FailCount= 1
2017-10-31T01:33:09.525Z,1509413589.525 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:33:13.129Z,1509413593.129 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T01:33:20.335Z,1509413600.335 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134774
CHAN A1 (24V): -0.003136
CHAN A2 (12V): -0.001862
CHAN A3 (5V): 0.000245
CHAN B0 (3.3V): -0.000283
CHAN B1 (3.15aV): -0.000325
CHAN B2 (3.15bV): -0.000388
CHAN B3 (GND): 0.000152
OPEN: -0.000417
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:34:25.259Z,1509413665.259 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:34:25.259Z,1509413665.259 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T01:34:25.260Z,1509413665.260 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:34:25.294Z,1509413665.294 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:34:25.735Z,1509413665.735 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:34:25.736Z,1509413665.736 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T01:34:26.046Z,1509413666.046 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:34:26.046Z,1509413666.046 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:34:26.047Z,1509413666.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:34:50.388Z,1509413690.388 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:35:01.222Z,1509413701.222 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134954
CHAN A1 (24V): -0.003238
CHAN A2 (12V): -0.002357
CHAN A3 (5V): 0.000318
CHAN B0 (3.3V): 4.766929
CHAN B1 (3.15aV): -0.000747
CHAN B2 (3.15bV): -0.000928
CHAN B3 (GND): -0.000016
OPEN: -0.000242
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:36:31.561Z,1509413791.561 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:36:31.933Z,1509413791.933 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T01:36:31.933Z,1509413791.933 [Default:CheckIn:C.Wait] Stopped
2017-10-31T01:36:31.933Z,1509413791.933 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T01:36:31.933Z,1509413791.933 [Default:CheckIn:D] Running Loop=1
2017-10-31T01:36:32.334Z,1509413792.334 [Default:CheckIn:D] Stopped
2017-10-31T01:36:32.334Z,1509413792.334 [Default:CheckIn:E] Running Loop=1
2017-10-31T01:36:32.735Z,1509413792.735 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 179.410335 min 
2017-10-31T01:36:32.736Z,1509413792.736 [Default:CheckIn:E] Stopped
2017-10-31T01:36:32.736Z,1509413792.736 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T01:36:32.736Z,1509413792.736 [Default:CheckIn] Stopped
2017-10-31T01:36:32.736Z,1509413792.736 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T01:36:32.736Z,1509413792.736 [Default:CheckIn](INFO): Running loop #13
2017-10-31T01:36:32.736Z,1509413792.736 [Default:CheckIn] Running Loop=13
2017-10-31T01:36:32.737Z,1509413792.737 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T01:36:32.737Z,1509413792.737 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T01:36:36.351Z,1509413796.351 [NAL9602](INFO): Powering up
2017-10-31T01:36:41.772Z,1509413801.772 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T01:36:41.772Z,1509413801.772 [BPC1] Data Fault, FailCount= 1
2017-10-31T01:36:41.772Z,1509413801.772 [BPC1](ERROR): Data Fault
2017-10-31T01:36:41.831Z,1509413801.831 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T01:36:43.022Z,1509413803.022 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:36:43.022Z,1509413803.022 [BPC1] No Fault, FailCount= 1
2017-10-31T01:36:44.595Z,1509413804.595 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003012
CHAN A1 (24V): -0.003520
CHAN A2 (12V): -0.001985
CHAN A3 (5V): 0.000162
CHAN B0 (3.3V): 0.000008
CHAN B1 (3.15aV): -0.000152
CHAN B2 (3.15bV): -0.000410
CHAN B3 (GND): 0.000108
OPEN: -0.000320
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:36:47.336Z,1509413807.336 [NAL9602](INFO): NAL9602 initialized
2017-10-31T01:36:48.134Z,1509413808.134 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T01:36:48.134Z,1509413808.134 [NAL9602] Data Fault, FailCount= 1
2017-10-31T01:36:48.134Z,1509413808.134 [NAL9602](ERROR): Data Fault
2017-10-31T01:36:48.216Z,1509413808.216 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T01:36:48.530Z,1509413808.530 [NAL9602](INFO): Powering down
2017-10-31T01:36:49.394Z,1509413809.394 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T01:36:49.394Z,1509413809.394 [NAL9602] No Fault, FailCount= 1
2017-10-31T01:37:18.546Z,1509413838.546 [NAL9602](INFO): Powering up NAL9602
2017-10-31T01:37:26.198Z,1509413846.198 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:37:26.198Z,1509413846.198 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T01:37:26.198Z,1509413846.198 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:37:26.227Z,1509413846.227 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:37:26.601Z,1509413846.601 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:37:26.601Z,1509413846.601 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T01:37:26.975Z,1509413846.975 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:37:26.976Z,1509413846.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:37:26.976Z,1509413846.976 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:37:29.732Z,1509413849.732 [NAL9602](INFO): NAL9602 initialized
2017-10-31T01:37:58.404Z,1509413878.404 [NAL9602](INFO): SBD MO Status=0, MOMSN=3306, MT Status=0, MTMSN=0
2017-10-31T01:37:58.404Z,1509413878.404 [NAL9602](INFO): No messages in MT queue
2017-10-31T01:38:14.883Z,1509413894.883 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:38:25.726Z,1509413905.726 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134207
CHAN A1 (24V): -0.004001
CHAN A2 (12V): -0.002469
CHAN A3 (5V): -0.000083
CHAN B0 (3.3V): 0.000322
CHAN B1 (3.15aV): -0.000302
CHAN B2 (3.15bV): 0.000511
CHAN B3 (GND): 0.000117
OPEN: -0.000532
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:38:40.001Z,1509413920.001 [PNI_TCM](ERROR): CRC does not match. Expected:0x58385 got:0x52253
2017-10-31T01:38:43.205Z,1509413923.205 [PNI_TCM](ERROR): CRC does not match. Expected:0x47703 got:0x21984
2017-10-31T01:38:51.190Z,1509413931.190 [PNI_TCM](ERROR): CRC does not match. Expected:0x31904 got:0x6591
2017-10-31T01:38:59.205Z,1509413939.205 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T01:38:59.205Z,1509413939.205 [BPC1] Data Fault, FailCount= 1
2017-10-31T01:38:59.205Z,1509413939.205 [BPC1](ERROR): Data Fault
2017-10-31T01:38:59.258Z,1509413939.258 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T01:39:00.457Z,1509413940.457 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:39:00.457Z,1509413940.457 [BPC1] No Fault, FailCount= 1
2017-10-31T01:39:04.002Z,1509413944.002 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T01:39:05.590Z,1509413945.590 [PNI_TCM](ERROR): CRC does not match. Expected:0x59323 got:0x45399
2017-10-31T01:39:07.214Z,1509413947.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x63223 got:0x6978
2017-10-31T01:39:08.795Z,1509413948.795 [PNI_TCM](ERROR): CRC does not match. Expected:0x43965 got:0x16981
2017-10-31T01:39:18.414Z,1509413958.414 [PNI_TCM](ERROR): CRC does not match. Expected:0x65375 got:0x45252
2017-10-31T01:39:24.802Z,1509413964.802 [PNI_TCM](ERROR): CRC does not match. Expected:0x14157 got:0x45273
2017-10-31T01:39:28.015Z,1509413968.015 [PNI_TCM](ERROR): CRC does not match. Expected:0x515 got:0x16981
2017-10-31T01:39:54.552Z,1509413994.552 [NAL9602](INFO): GPS fix at 20171031T013952: (36.803029, -121.788148)
2017-10-31T01:39:54.621Z,1509413994.621 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T01:39:54.622Z,1509413994.622 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T01:39:55.954Z,1509413995.954 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:39:59.359Z,1509413999.359 [DataOverHttps](INFO): Sending 78 bytes from file Logs/20171030T210256/Courier0088.lzma
2017-10-31T01:40:00.090Z,1509414000.090 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0088.lzma.bak
2017-10-31T01:40:00.090Z,1509414000.090 [DataOverHttps](INFO): SBD MOMSN=5177690
2017-10-31T01:40:09.502Z,1509414009.502 [DataOverHttps](INFO): Sending 615 bytes from file Logs/20171030T210256/Express0089.lzma
2017-10-31T01:40:10.306Z,1509414010.306 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0089.lzma.bak
2017-10-31T01:40:10.307Z,1509414010.307 [DataOverHttps](INFO): SBD MOMSN=5177693
2017-10-31T01:40:10.777Z,1509414010.777 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T01:40:10.777Z,1509414010.777 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T01:40:10.777Z,1509414010.777 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T01:40:17.619Z,1509414017.619 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002742
CHAN A1 (24V): -0.004363
CHAN A2 (12V): -0.002018
CHAN A3 (5V): 0.000006
CHAN B0 (3.3V): -0.000293
CHAN B1 (3.15aV): -0.000573
CHAN B2 (3.15bV): -0.000454
CHAN B3 (GND): -0.000053
OPEN: -0.000576
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:40:23.169Z,1509414023.169 [PNI_TCM](ERROR): CRC does not match. Expected:0x35314 got:0x0
2017-10-31T01:40:27.180Z,1509414027.180 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:40:27.181Z,1509414027.181 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T01:40:27.181Z,1509414027.181 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:40:27.195Z,1509414027.195 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:40:27.605Z,1509414027.605 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:40:27.605Z,1509414027.605 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T01:40:27.987Z,1509414027.987 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:40:27.992Z,1509414027.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:40:27.992Z,1509414027.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:40:29.539Z,1509414029.539 [NAL9602](INFO): Powering down
2017-10-31T01:41:40.579Z,1509414100.579 [BPC1](ERROR): Failed to receive battery data
2017-10-31T01:41:40.579Z,1509414100.579 [BPC1] Communications Fault, FailCount= 1
2017-10-31T01:41:40.579Z,1509414100.579 [BPC1](ERROR): Communications Fault
2017-10-31T01:41:40.637Z,1509414100.637 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T01:41:41.842Z,1509414101.842 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:41:41.842Z,1509414101.842 [BPC1] No Fault, FailCount= 1
2017-10-31T01:41:47.815Z,1509414107.815 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:41:58.632Z,1509414118.632 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135033
CHAN A1 (24V): -0.003508
CHAN A2 (12V): -0.002404
CHAN A3 (5V): -0.000368
CHAN B0 (3.3V): 0.000809
CHAN B1 (3.15aV): 0.000001
CHAN B2 (3.15bV): -0.000496
CHAN B3 (GND): -0.000197
OPEN: -0.000404
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:42:19.203Z,1509414139.203 [PNI_TCM](ERROR): CRC does not match. Expected:0x29189 got:0x16938
2017-10-31T01:42:24.023Z,1509414144.023 [PNI_TCM](ERROR): CRC does not match. Expected:0x65231 got:0x16938
2017-10-31T01:42:28.806Z,1509414148.806 [PNI_TCM](ERROR): CRC does not match. Expected:0x40883 got:0x25351
2017-10-31T01:42:33.608Z,1509414153.608 [PNI_TCM](ERROR): CRC does not match. Expected:0x59701 got:0x6591
2017-10-31T01:42:35.192Z,1509414155.192 [PNI_TCM](ERROR): CRC does not match. Expected:0x19312 got:0x49067
2017-10-31T01:42:38.403Z,1509414158.403 [PNI_TCM](ERROR): CRC does not match. Expected:0x47948 got:0x10981
2017-10-31T01:42:52.793Z,1509414172.793 [PNI_TCM](ERROR): CRC does not match. Expected:0x23417 got:0x19170
2017-10-31T01:42:59.213Z,1509414179.213 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16541
2017-10-31T01:43:00.801Z,1509414180.801 [PNI_TCM](ERROR): CRC does not match. Expected:0x19983 got:0x16938
2017-10-31T01:43:14.992Z,1509414194.992 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T01:43:28.354Z,1509414208.354 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:43:28.354Z,1509414208.354 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T01:43:28.354Z,1509414208.354 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:43:28.396Z,1509414208.396 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:43:28.679Z,1509414208.679 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:43:28.679Z,1509414208.679 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T01:43:28.680Z,1509414208.680 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:43:29.066Z,1509414209.066 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:43:29.067Z,1509414209.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:43:29.067Z,1509414209.067 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:43:39.469Z,1509414219.469 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134948
CHAN A1 (24V): -0.003427
CHAN A2 (12V): -0.002186
CHAN A3 (5V): 0.000395
CHAN B0 (3.3V): -0.000139
CHAN B1 (3.15aV): -0.000281
CHAN B2 (3.15bV): -0.000037
CHAN B3 (GND): 0.000068
OPEN: -0.000291
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:44:26.378Z,1509414266.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T01:45:09.624Z,1509414309.624 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:45:11.200Z,1509414311.200 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T01:45:11.200Z,1509414311.200 [Default:CheckIn:C.Wait] Stopped
2017-10-31T01:45:11.200Z,1509414311.200 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T01:45:11.200Z,1509414311.200 [Default:CheckIn:D] Running Loop=1
2017-10-31T01:45:11.595Z,1509414311.595 [Default:CheckIn:D] Stopped
2017-10-31T01:45:11.595Z,1509414311.595 [Default:CheckIn:E] Running Loop=1
2017-10-31T01:45:12.004Z,1509414312.004 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 188.064681 min 
2017-10-31T01:45:12.004Z,1509414312.004 [Default:CheckIn:E] Stopped
2017-10-31T01:45:12.004Z,1509414312.004 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T01:45:12.004Z,1509414312.004 [Default:CheckIn] Stopped
2017-10-31T01:45:12.005Z,1509414312.005 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T01:45:12.005Z,1509414312.005 [Default:CheckIn](INFO): Running loop #14
2017-10-31T01:45:12.005Z,1509414312.005 [Default:CheckIn] Running Loop=14
2017-10-31T01:45:12.005Z,1509414312.005 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T01:45:12.005Z,1509414312.005 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T01:45:15.454Z,1509414315.454 [NAL9602](INFO): Powering up
2017-10-31T01:45:23.523Z,1509414323.523 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003347
CHAN A1 (24V): -0.003654
CHAN A2 (12V): -0.001717
CHAN A3 (5V): 0.000703
CHAN B0 (3.3V): 0.000182
CHAN B1 (3.15aV): 0.000022
CHAN B2 (3.15bV): -0.000850
CHAN B3 (GND): -0.000254
OPEN: -0.000491
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:45:26.261Z,1509414326.261 [NAL9602](INFO): NAL9602 initialized
2017-10-31T01:46:01.866Z,1509414361.866 [NAL9602](INFO): SBD MO Status=2, MOMSN=3307, MT Status=2, MTMSN=0
2017-10-31T01:46:01.867Z,1509414361.867 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:46:29.333Z,1509414389.333 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:46:29.334Z,1509414389.334 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T01:46:29.334Z,1509414389.334 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:46:29.363Z,1509414389.364 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:46:29.760Z,1509414389.760 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:46:29.760Z,1509414389.760 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T01:46:30.130Z,1509414390.130 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:46:30.130Z,1509414390.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:46:30.130Z,1509414390.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:46:53.680Z,1509414413.680 [NAL9602](INFO): SBD MO Status=2, MOMSN=3307, MT Status=2, MTMSN=0
2017-10-31T01:46:53.681Z,1509414413.681 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:46:53.778Z,1509414413.778 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:47:04.585Z,1509414424.585 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002398
CHAN A1 (24V): -0.004425
CHAN A2 (12V): -0.001868
CHAN A3 (5V): 0.000373
CHAN B0 (3.3V): -0.000677
CHAN B1 (3.15aV): -0.000694
CHAN B2 (3.15bV): -0.000351
CHAN B3 (GND): -0.000709
OPEN: -0.000709
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:47:43.639Z,1509414463.639 [NAL9602](INFO): SBD MO Status=2, MOMSN=3307, MT Status=2, MTMSN=0
2017-10-31T01:47:43.640Z,1509414463.640 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T01:48:34.753Z,1509414514.753 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:48:45.529Z,1509414525.529 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002322
CHAN A1 (24V): -0.004365
CHAN A2 (12V): -0.002112
CHAN A3 (5V): 0.000095
CHAN B0 (3.3V): -0.000207
CHAN B1 (3.15aV): -0.000243
CHAN B2 (3.15bV): -0.000126
CHAN B3 (GND): 0.000347
OPEN: -0.000409
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:49:00.261Z,1509414540.261 [NAL9602](INFO): SBD MO Status=0, MOMSN=3307, MT Status=0, MTMSN=0
2017-10-31T01:49:00.261Z,1509414540.261 [NAL9602](INFO): No messages in MT queue
2017-10-31T01:49:16.338Z,1509414556.338 [NAL9602](INFO): GPS fix at 20171031T014911: (36.802777, -121.787935)
2017-10-31T01:49:16.396Z,1509414556.396 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T01:49:16.396Z,1509414556.396 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T01:49:21.528Z,1509414561.528 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20171030T210256/Courier0092.lzma
2017-10-31T01:49:22.271Z,1509414562.271 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0092.lzma.bak
2017-10-31T01:49:22.271Z,1509414562.271 [DataOverHttps](INFO): SBD MOMSN=5177708
2017-10-31T01:49:31.336Z,1509414571.336 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:49:31.336Z,1509414571.336 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T01:49:31.336Z,1509414571.336 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:49:31.381Z,1509414571.381 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:49:31.424Z,1509414571.424 [DataOverHttps](INFO): Sending 559 bytes from file Logs/20171030T210256/Express0093.lzma
2017-10-31T01:49:31.520Z,1509414571.520 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:49:31.520Z,1509414571.520 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T01:49:31.879Z,1509414571.879 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:49:31.884Z,1509414571.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:49:31.884Z,1509414571.884 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:49:32.221Z,1509414572.221 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0093.lzma.bak
2017-10-31T01:49:32.221Z,1509414572.221 [DataOverHttps](INFO): SBD MOMSN=5177711
2017-10-31T01:49:32.677Z,1509414572.677 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T01:49:32.677Z,1509414572.677 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T01:49:32.678Z,1509414572.678 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T01:49:47.863Z,1509414587.863 [NAL9602](INFO): Powering down
2017-10-31T01:50:15.542Z,1509414615.542 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:50:26.383Z,1509414626.383 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134569
CHAN A1 (24V): -0.004092
CHAN A2 (12V): -0.002571
CHAN A3 (5V): 0.000298
CHAN B0 (3.3V): 0.000131
CHAN B1 (3.15aV): -0.000758
CHAN B2 (3.15bV): -0.000440
CHAN B3 (GND): 0.000000
OPEN: -0.000215
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:51:24.099Z,1509414684.099 [BPC1](ERROR): Failed to receive battery data
2017-10-31T01:51:24.100Z,1509414684.100 [BPC1] Communications Fault, FailCount= 1
2017-10-31T01:51:24.100Z,1509414684.100 [BPC1](ERROR): Communications Fault
2017-10-31T01:51:24.151Z,1509414684.151 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T01:51:25.325Z,1509414685.325 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T01:51:25.325Z,1509414685.325 [BPC1] No Fault, FailCount= 1
2017-10-31T01:51:56.689Z,1509414716.689 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:52:07.537Z,1509414727.537 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003730
CHAN A1 (24V): -0.003191
CHAN A2 (12V): -0.001986
CHAN A3 (5V): 0.000223
CHAN B0 (3.3V): -0.000416
CHAN B1 (3.15aV): 0.000117
CHAN B2 (3.15bV): -0.000466
CHAN B3 (GND): -0.000498
OPEN: -0.000395
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:52:31.911Z,1509414751.911 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:52:31.912Z,1509414751.912 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T01:52:31.912Z,1509414751.912 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:52:31.925Z,1509414751.925 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:52:32.313Z,1509414752.313 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:52:32.313Z,1509414752.313 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T01:52:32.677Z,1509414752.677 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:52:32.678Z,1509414752.678 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:52:32.678Z,1509414752.678 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:53:15.322Z,1509414795.322 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T01:53:37.723Z,1509414817.723 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:53:48.527Z,1509414828.527 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134743
CHAN A1 (24V): -0.003626
CHAN A2 (12V): -0.002132
CHAN A3 (5V): 0.000027
CHAN B0 (3.3V): -0.000610
CHAN B1 (3.15aV): 0.000004
CHAN B2 (3.15bV): -0.000142
CHAN B3 (GND): -0.000491
OPEN: -0.000397
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:54:33.294Z,1509414873.294 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T01:54:33.295Z,1509414873.295 [Default:CheckIn:C.Wait] Stopped
2017-10-31T01:54:33.295Z,1509414873.295 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T01:54:33.295Z,1509414873.295 [Default:CheckIn:D] Running Loop=1
2017-10-31T01:54:33.696Z,1509414873.696 [Default:CheckIn:D] Stopped
2017-10-31T01:54:33.696Z,1509414873.696 [Default:CheckIn:E] Running Loop=1
2017-10-31T01:54:34.091Z,1509414874.091 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 197.433024 min 
2017-10-31T01:54:34.091Z,1509414874.091 [Default:CheckIn:E] Stopped
2017-10-31T01:54:34.091Z,1509414874.091 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T01:54:34.092Z,1509414874.092 [Default:CheckIn] Stopped
2017-10-31T01:54:34.092Z,1509414874.092 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T01:54:34.092Z,1509414874.092 [Default:CheckIn](INFO): Running loop #15
2017-10-31T01:54:34.092Z,1509414874.092 [Default:CheckIn] Running Loop=15
2017-10-31T01:54:34.092Z,1509414874.092 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T01:54:34.092Z,1509414874.092 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T01:54:37.425Z,1509414877.425 [NAL9602](INFO): Powering up
2017-10-31T01:54:48.566Z,1509414888.566 [NAL9602](INFO): NAL9602 initialized
2017-10-31T01:55:18.657Z,1509414918.657 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:55:29.452Z,1509414929.452 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003038
CHAN A1 (24V): -0.003415
CHAN A2 (12V): -0.002265
CHAN A3 (5V): 0.000056
CHAN B0 (3.3V): 0.000096
CHAN B1 (3.15aV): -0.000225
CHAN B2 (3.15bV): -0.000045
CHAN B3 (GND): -0.000047
OPEN: -0.000330
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:55:33.031Z,1509414933.031 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:55:33.032Z,1509414933.032 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T01:55:33.032Z,1509414933.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:55:33.066Z,1509414933.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:55:33.431Z,1509414933.431 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:55:33.431Z,1509414933.431 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T01:55:33.804Z,1509414933.804 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:55:33.805Z,1509414933.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:55:33.805Z,1509414933.805 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:56:59.589Z,1509415019.589 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:57:10.432Z,1509415030.432 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134253
CHAN A1 (24V): -0.004144
CHAN A2 (12V): -0.002391
CHAN A3 (5V): 0.000377
CHAN B0 (3.3V): -0.000268
CHAN B1 (3.15aV): -0.000292
CHAN B2 (3.15bV): -0.000020
CHAN B3 (GND): 0.000458
OPEN: -0.000441
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:57:20.327Z,1509415040.327 [NAL9602](INFO): SBD MO Status=0, MOMSN=3308, MT Status=0, MTMSN=0
2017-10-31T01:57:20.327Z,1509415040.327 [NAL9602](INFO): No messages in MT queue
2017-10-31T01:58:34.122Z,1509415114.122 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T01:58:34.123Z,1509415114.123 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T01:58:34.123Z,1509415114.123 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T01:58:34.160Z,1509415114.160 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T01:58:34.557Z,1509415114.557 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T01:58:34.557Z,1509415114.557 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T01:58:34.918Z,1509415114.918 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T01:58:34.919Z,1509415114.919 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T01:58:34.919Z,1509415114.919 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T01:58:40.733Z,1509415120.733 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T01:58:51.527Z,1509415131.527 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002295
CHAN A1 (24V): -0.003841
CHAN A2 (12V): -0.002197
CHAN A3 (5V): 0.000901
CHAN B0 (3.3V): 0.000608
CHAN B1 (3.15aV): -0.000481
CHAN B2 (3.15bV): -0.000485
CHAN B3 (GND): 0.000144
OPEN: -0.000560
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T01:59:34.306Z,1509415174.306 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T01:54:34.1Z
2017-10-31T01:59:34.306Z,1509415174.306 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T01:59:34.306Z,1509415174.306 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T01:59:38.608Z,1509415178.608 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0096.lzma
2017-10-31T01:59:39.379Z,1509415179.379 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0096.lzma.bak
2017-10-31T01:59:39.379Z,1509415179.379 [DataOverHttps](INFO): SBD MOMSN=5177728
2017-10-31T01:59:48.560Z,1509415188.560 [DataOverHttps](INFO): Sending 548 bytes from file Logs/20171030T210256/Express0097.lzma
2017-10-31T01:59:49.314Z,1509415189.314 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0097.lzma.bak
2017-10-31T01:59:49.315Z,1509415189.315 [DataOverHttps](INFO): SBD MOMSN=5177730
2017-10-31T01:59:49.773Z,1509415189.773 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T01:59:49.774Z,1509415189.774 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T01:59:49.774Z,1509415189.774 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T02:00:08.737Z,1509415208.737 [NAL9602](INFO): Powering down
2017-10-31T02:00:21.637Z,1509415221.637 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:00:32.420Z,1509415232.420 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134321
CHAN A1 (24V): -0.004062
CHAN A2 (12V): -0.001800
CHAN A3 (5V): 0.000509
CHAN B0 (3.3V): -0.000263
CHAN B1 (3.15aV): 0.000198
CHAN B2 (3.15bV): -0.000393
CHAN B3 (GND): -0.000351
OPEN: -0.000373
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:01:27.704Z,1509415287.704 [BPC1](ERROR): Failed to parse message.
2017-10-31T02:01:27.704Z,1509415287.704 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T02:01:27.704Z,1509415287.704 [BPC1] Data Fault, FailCount= 1
2017-10-31T02:01:27.704Z,1509415287.704 [BPC1](ERROR): Data Fault
2017-10-31T02:01:27.763Z,1509415287.763 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:01:28.946Z,1509415288.946 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:01:28.946Z,1509415288.946 [BPC1] No Fault, FailCount= 1
2017-10-31T02:01:35.329Z,1509415295.329 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:01:35.329Z,1509415295.329 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T02:01:35.329Z,1509415295.329 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:01:35.355Z,1509415295.355 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:01:35.742Z,1509415295.742 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:01:35.742Z,1509415295.742 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T02:01:36.127Z,1509415296.127 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:01:36.127Z,1509415296.127 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:01:36.128Z,1509415296.128 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:02:02.680Z,1509415322.680 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:02:13.503Z,1509415333.503 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002872
CHAN A1 (24V): -0.003349
CHAN A2 (12V): -0.001850
CHAN A3 (5V): 0.000233
CHAN B0 (3.3V): -0.000166
CHAN B1 (3.15aV): 0.000104
CHAN B2 (3.15bV): 0.000027
CHAN B3 (GND): 0.000662
OPEN: -0.000480
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:03:14.168Z,1509415394.168 [BPC1](ERROR): Failed to parse message.
2017-10-31T02:03:14.168Z,1509415394.168 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T02:03:14.168Z,1509415394.168 [BPC1] Data Fault, FailCount= 1
2017-10-31T02:03:14.168Z,1509415394.168 [BPC1](ERROR): Data Fault
2017-10-31T02:03:14.245Z,1509415394.245 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:03:15.388Z,1509415395.388 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:03:15.388Z,1509415395.388 [BPC1] No Fault, FailCount= 1
2017-10-31T02:03:15.389Z,1509415395.389 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T02:03:43.820Z,1509415423.820 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:03:57.388Z,1509415437.388 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003688
CHAN A1 (24V): -0.003633
CHAN A2 (12V): -0.002045
CHAN A3 (5V): 0.000360
CHAN B0 (3.3V): -0.000062
CHAN B1 (3.15aV): -0.000329
CHAN B2 (3.15bV): -0.000140
CHAN B3 (GND): 0.000567
OPEN: -0.000498
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:04:36.136Z,1509415476.136 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:04:36.136Z,1509415476.136 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T02:04:36.136Z,1509415476.136 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:04:36.150Z,1509415476.150 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:04:36.571Z,1509415476.571 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:04:36.571Z,1509415476.571 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T02:04:36.947Z,1509415476.947 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:04:36.947Z,1509415476.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:04:36.948Z,1509415476.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:04:50.543Z,1509415490.543 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T02:04:50.543Z,1509415490.543 [Default:CheckIn:C.Wait] Stopped
2017-10-31T02:04:50.543Z,1509415490.543 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T02:04:50.543Z,1509415490.543 [Default:CheckIn:D] Running Loop=1
2017-10-31T02:04:50.943Z,1509415490.943 [Default:CheckIn:D] Stopped
2017-10-31T02:04:50.944Z,1509415490.944 [Default:CheckIn:E] Running Loop=1
2017-10-31T02:04:51.340Z,1509415491.340 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 207.720492 min 
2017-10-31T02:04:51.341Z,1509415491.341 [Default:CheckIn:E] Stopped
2017-10-31T02:04:51.341Z,1509415491.341 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T02:04:51.341Z,1509415491.341 [Default:CheckIn] Stopped
2017-10-31T02:04:51.341Z,1509415491.341 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T02:04:51.341Z,1509415491.341 [Default:CheckIn](INFO): Running loop #16
2017-10-31T02:04:51.341Z,1509415491.341 [Default:CheckIn] Running Loop=16
2017-10-31T02:04:51.341Z,1509415491.341 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T02:04:51.341Z,1509415491.341 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T02:04:54.737Z,1509415494.737 [NAL9602](INFO): Powering up
2017-10-31T02:05:05.918Z,1509415505.918 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:05:06.720Z,1509415506.720 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T02:05:06.720Z,1509415506.720 [NAL9602] Data Fault, FailCount= 1
2017-10-31T02:05:06.720Z,1509415506.720 [NAL9602](ERROR): Data Fault
2017-10-31T02:05:06.804Z,1509415506.804 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T02:05:07.126Z,1509415507.126 [NAL9602](INFO): Powering down
2017-10-31T02:05:08.017Z,1509415508.017 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T02:05:08.018Z,1509415508.018 [NAL9602] No Fault, FailCount= 1
2017-10-31T02:05:27.592Z,1509415527.592 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:05:37.517Z,1509415537.517 [NAL9602](INFO): Powering up NAL9602
2017-10-31T02:05:38.415Z,1509415538.415 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134834
CHAN A1 (24V): -0.002837
CHAN A2 (12V): -0.001935
CHAN A3 (5V): 0.000223
CHAN B0 (3.3V): -0.000307
CHAN B1 (3.15aV): 0.000078
CHAN B2 (3.15bV): -0.000190
CHAN B3 (GND): -0.000415
OPEN: -0.000318
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:05:48.317Z,1509415548.317 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:06:59.683Z,1509415619.683 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T02:06:59.683Z,1509415619.683 [BPC1] Data Fault, FailCount= 1
2017-10-31T02:06:59.683Z,1509415619.683 [BPC1](ERROR): Data Fault
2017-10-31T02:06:59.706Z,1509415619.706 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:07:00.951Z,1509415620.951 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:07:00.951Z,1509415620.951 [BPC1] No Fault, FailCount= 1
2017-10-31T02:07:08.527Z,1509415628.527 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:07:19.327Z,1509415639.327 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003142
CHAN A1 (24V): -0.003882
CHAN A2 (12V): -0.002321
CHAN A3 (5V): 0.000247
CHAN B0 (3.3V): -0.000281
CHAN B1 (3.15aV): -0.000102
CHAN B2 (3.15bV): 0.000045
CHAN B3 (GND): 0.000370
OPEN: -0.000344
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:07:37.292Z,1509415657.292 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:07:37.292Z,1509415657.292 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T02:07:37.292Z,1509415657.292 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:07:37.306Z,1509415657.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:07:37.707Z,1509415657.707 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:07:37.707Z,1509415657.707 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T02:07:38.096Z,1509415658.096 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:07:38.096Z,1509415658.096 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:07:38.096Z,1509415658.096 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:08:01.644Z,1509415681.644 [PNI_TCM](ERROR): CRC does not match. Expected:0x23514 got:0x48642
2017-10-31T02:08:09.650Z,1509415689.650 [PNI_TCM](ERROR): CRC does not match. Expected:0x35638 got:0x16279
2017-10-31T02:08:16.058Z,1509415696.058 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T02:08:22.455Z,1509415702.455 [PNI_TCM](ERROR): CRC does not match. Expected:0x47024 got:0x16938
2017-10-31T02:08:27.251Z,1509415707.251 [PNI_TCM](ERROR): CRC does not match. Expected:0x65342 got:0x16813
2017-10-31T02:08:36.848Z,1509415716.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x27859 got:0x4125
2017-10-31T02:08:41.649Z,1509415721.649 [PNI_TCM](ERROR): CRC does not match. Expected:0x51851 got:0x40332
2017-10-31T02:08:49.691Z,1509415729.691 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:09:02.774Z,1509415742.774 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003114
CHAN A1 (24V): -0.004153
CHAN A2 (12V): -0.002027
CHAN A3 (5V): 0.000529
CHAN B0 (3.3V): -0.000233
CHAN B1 (3.15aV): 0.000342
CHAN B2 (3.15bV): 0.000292
CHAN B3 (GND): 0.000124
OPEN: -0.000603
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:09:51.575Z,1509415791.575 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T02:04:51.3Z
2017-10-31T02:09:51.575Z,1509415791.575 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T02:09:51.575Z,1509415791.575 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T02:09:56.318Z,1509415796.318 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0100.lzma
2017-10-31T02:09:57.068Z,1509415797.068 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0100.lzma.bak
2017-10-31T02:09:57.068Z,1509415797.068 [DataOverHttps](INFO): SBD MOMSN=5177745
2017-10-31T02:10:06.257Z,1509415806.257 [DataOverHttps](INFO): Sending 587 bytes from file Logs/20171030T210256/Express0101.lzma
2017-10-31T02:10:07.043Z,1509415807.043 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0101.lzma.bak
2017-10-31T02:10:07.044Z,1509415807.044 [DataOverHttps](INFO): SBD MOMSN=5177747
2017-10-31T02:10:07.506Z,1509415807.506 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T02:10:07.506Z,1509415807.506 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T02:10:07.506Z,1509415807.506 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T02:10:32.996Z,1509415832.996 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:10:38.157Z,1509415838.157 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:10:38.157Z,1509415838.157 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T02:10:38.157Z,1509415838.157 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:10:38.171Z,1509415838.171 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:10:38.571Z,1509415838.571 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:10:38.571Z,1509415838.571 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T02:10:38.949Z,1509415838.949 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:10:38.949Z,1509415838.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:10:38.950Z,1509415838.950 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:10:43.757Z,1509415843.757 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133341
CHAN A1 (24V): -0.004781
CHAN A2 (12V): -0.002541
CHAN A3 (5V): 0.000036
CHAN B0 (3.3V): -0.000372
CHAN B1 (3.15aV): -0.000513
CHAN B2 (3.15bV): -0.000137
CHAN B3 (GND): -0.000219
OPEN: -0.000350
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:10:51.312Z,1509415851.312 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T02:11:21.922Z,1509415881.922 [NAL9602](INFO): Powering down
2017-10-31T02:12:14.207Z,1509415934.207 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:12:24.973Z,1509415944.973 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134366
CHAN A1 (24V): -0.004342
CHAN A2 (12V): -0.002627
CHAN A3 (5V): 0.000341
CHAN B0 (3.3V): -0.000066
CHAN B1 (3.15aV): -0.000293
CHAN B2 (3.15bV): -0.000334
CHAN B3 (GND): -0.000068
OPEN: -0.000756
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:13:15.604Z,1509415995.604 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T02:13:39.201Z,1509416019.201 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:13:39.202Z,1509416019.202 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T02:13:39.202Z,1509416019.202 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:13:39.215Z,1509416019.215 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:13:39.583Z,1509416019.583 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:13:39.583Z,1509416019.583 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T02:13:39.971Z,1509416019.971 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:13:39.971Z,1509416019.971 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:13:39.972Z,1509416019.972 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:13:55.234Z,1509416035.234 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:14:05.981Z,1509416045.981 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003009
CHAN A1 (24V): -0.004285
CHAN A2 (12V): -0.001904
CHAN A3 (5V): -0.000059
CHAN B0 (3.3V): 0.000097
CHAN B1 (3.15aV): -0.000482
CHAN B2 (3.15bV): -0.000132
CHAN B3 (GND): 0.000106
OPEN: -0.000648
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:15:08.268Z,1509416108.268 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T02:15:08.268Z,1509416108.268 [Default:CheckIn:C.Wait] Stopped
2017-10-31T02:15:08.268Z,1509416108.268 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T02:15:08.268Z,1509416108.268 [Default:CheckIn:D] Running Loop=1
2017-10-31T02:15:08.538Z,1509416108.538 [Default:CheckIn:D] Stopped
2017-10-31T02:15:08.538Z,1509416108.538 [Default:CheckIn:E] Running Loop=1
2017-10-31T02:15:08.939Z,1509416108.939 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 218.013737 min 
2017-10-31T02:15:08.939Z,1509416108.939 [Default:CheckIn:E] Stopped
2017-10-31T02:15:08.939Z,1509416108.939 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T02:15:08.939Z,1509416108.939 [Default:CheckIn] Stopped
2017-10-31T02:15:08.939Z,1509416108.939 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T02:15:08.940Z,1509416108.940 [Default:CheckIn](INFO): Running loop #17
2017-10-31T02:15:08.940Z,1509416108.940 [Default:CheckIn] Running Loop=17
2017-10-31T02:15:08.940Z,1509416108.940 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T02:15:08.940Z,1509416108.940 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T02:15:12.301Z,1509416112.301 [NAL9602](INFO): Powering up
2017-10-31T02:15:23.491Z,1509416123.491 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:15:36.356Z,1509416136.356 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:15:47.172Z,1509416147.172 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134451
CHAN A1 (24V): -0.003698
CHAN A2 (12V): -0.002088
CHAN A3 (5V): -0.000188
CHAN B0 (3.3V): 0.000225
CHAN B1 (3.15aV): -0.000125
CHAN B2 (3.15bV): -0.000293
CHAN B3 (GND): -0.000377
OPEN: -0.000200
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:15:55.498Z,1509416155.498 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T02:15:55.572Z,1509416155.572 [NAL9602](FAULT): received: 
+CSQ:0

OK08, 0, 0, 0, 0

OK
2017-10-31T02:15:55.572Z,1509416155.572 [NAL9602] Data Fault, FailCount= 2
2017-10-31T02:15:55.572Z,1509416155.572 [NAL9602](ERROR): Data Fault
2017-10-31T02:15:55.674Z,1509416155.674 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T02:15:55.896Z,1509416155.896 [NAL9602](INFO): Powering down
2017-10-31T02:15:56.745Z,1509416156.745 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T02:15:56.745Z,1509416156.745 [NAL9602] No Fault, FailCount= 2
2017-10-31T02:16:26.199Z,1509416186.199 [NAL9602](INFO): Powering up NAL9602
2017-10-31T02:16:36.991Z,1509416196.991 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:16:37.799Z,1509416197.799 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T02:16:37.800Z,1509416197.800 [NAL9602] Data Fault, FailCount= 3
2017-10-31T02:16:37.800Z,1509416197.800 [NAL9602](ERROR): Data Fault
2017-10-31T02:16:37.885Z,1509416197.885 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T02:16:38.197Z,1509416198.197 [NAL9602](INFO): Powering down
2017-10-31T02:16:39.079Z,1509416199.079 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T02:16:39.079Z,1509416199.079 [NAL9602] No Fault, FailCount= 3
2017-10-31T02:16:40.236Z,1509416200.236 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:16:40.236Z,1509416200.236 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T02:16:40.236Z,1509416200.236 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:16:40.250Z,1509416200.250 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:16:40.699Z,1509416200.699 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:16:40.699Z,1509416200.699 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T02:16:41.065Z,1509416201.065 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:16:41.065Z,1509416201.065 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:16:41.065Z,1509416201.065 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:17:08.201Z,1509416228.201 [NAL9602](INFO): Powering up NAL9602
2017-10-31T02:17:17.226Z,1509416237.226 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:17:19.163Z,1509416239.163 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:17:28.073Z,1509416248.073 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002424
CHAN A1 (24V): -0.004412
CHAN A2 (12V): -0.002241
CHAN A3 (5V): 0.000324
CHAN B0 (3.3V): -0.000151
CHAN B1 (3.15aV): -0.000444
CHAN B2 (3.15bV): -0.000643
CHAN B3 (GND): 0.000323
OPEN: -0.000314
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:18:58.297Z,1509416338.297 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:19:09.117Z,1509416349.117 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133879
CHAN A1 (24V): -0.003947
CHAN A2 (12V): -0.002362
CHAN A3 (5V): 0.000547
CHAN B0 (3.3V): -0.000136
CHAN B1 (3.15aV): 0.000039
CHAN B2 (3.15bV): -0.000408
CHAN B3 (GND): 0.000164
OPEN: -0.000342
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:19:41.440Z,1509416381.440 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:19:41.445Z,1509416381.445 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T02:19:41.445Z,1509416381.445 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:19:41.462Z,1509416381.462 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:19:41.830Z,1509416381.830 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:19:41.830Z,1509416381.830 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T02:19:42.188Z,1509416382.188 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:19:42.188Z,1509416382.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:19:42.188Z,1509416382.188 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:20:08.973Z,1509416408.973 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T02:15:08.9Z
2017-10-31T02:20:08.973Z,1509416408.973 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T02:20:08.974Z,1509416408.974 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T02:20:13.724Z,1509416413.724 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0104.lzma
2017-10-31T02:20:14.508Z,1509416414.508 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0104.lzma.bak
2017-10-31T02:20:14.508Z,1509416414.508 [DataOverHttps](INFO): SBD MOMSN=5177763
2017-10-31T02:20:24.932Z,1509416424.932 [DataOverHttps](INFO): Sending 682 bytes from file Logs/20171030T210256/Express0105.lzma
2017-10-31T02:20:25.701Z,1509416425.701 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0105.lzma.bak
2017-10-31T02:20:25.702Z,1509416425.702 [DataOverHttps](INFO): SBD MOMSN=5177765
2017-10-31T02:20:26.133Z,1509416426.133 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T02:20:26.188Z,1509416426.188 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T02:20:26.188Z,1509416426.188 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T02:20:26.188Z,1509416426.188 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T02:20:39.306Z,1509416439.306 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:20:43.274Z,1509416443.274 [PNI_TCM](ERROR): CRC does not match. Expected:0x475 got:0x45239
2017-10-31T02:20:50.116Z,1509416450.116 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002736
CHAN A1 (24V): -0.003983
CHAN A2 (12V): -0.002124
CHAN A3 (5V): 0.000520
CHAN B0 (3.3V): 0.000163
CHAN B1 (3.15aV): 0.000134
CHAN B2 (3.15bV): -0.000240
CHAN B3 (GND): -0.000662
OPEN: -0.000267
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:20:54.485Z,1509416454.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x48521 got:0x18951
2017-10-31T02:20:56.865Z,1509416456.865 [NAL9602](INFO): Powering down
2017-10-31T02:21:17.679Z,1509416477.679 [BPC1](ERROR): Failed to receive battery data
2017-10-31T02:21:17.679Z,1509416477.679 [BPC1] Communications Fault, FailCount= 1
2017-10-31T02:21:17.680Z,1509416477.680 [BPC1](ERROR): Communications Fault
2017-10-31T02:21:17.750Z,1509416477.750 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T02:21:18.930Z,1509416478.930 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:21:18.930Z,1509416478.930 [BPC1] No Fault, FailCount= 1
2017-10-31T02:22:20.280Z,1509416540.280 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:22:33.386Z,1509416553.386 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002940
CHAN A1 (24V): -0.003614
CHAN A2 (12V): -0.002120
CHAN A3 (5V): 0.000688
CHAN B0 (3.3V): -0.000016
CHAN B1 (3.15aV): -0.000832
CHAN B2 (3.15bV): -0.000169
CHAN B3 (GND): -0.000051
OPEN: -0.000335
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:22:42.596Z,1509416562.596 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:22:42.596Z,1509416562.596 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T02:22:42.596Z,1509416562.596 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:22:42.622Z,1509416562.622 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:22:43.021Z,1509416563.021 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:22:43.021Z,1509416563.021 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T02:22:43.348Z,1509416563.348 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:22:43.349Z,1509416563.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:22:43.349Z,1509416563.349 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:23:15.800Z,1509416595.800 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T02:24:03.423Z,1509416643.423 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:24:14.221Z,1509416654.221 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003249
CHAN A1 (24V): -0.003202
CHAN A2 (12V): -0.001947
CHAN A3 (5V): 0.000059
CHAN B0 (3.3V): -0.000381
CHAN B1 (3.15aV): 0.000254
CHAN B2 (3.15bV): -0.000295
CHAN B3 (GND): -0.000048
OPEN: -0.000326
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:25:26.736Z,1509416726.736 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T02:25:26.736Z,1509416726.736 [Default:CheckIn:C.Wait] Stopped
2017-10-31T02:25:26.737Z,1509416726.737 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T02:25:26.737Z,1509416726.737 [Default:CheckIn:D] Running Loop=1
2017-10-31T02:25:27.139Z,1509416727.139 [Default:CheckIn:D] Stopped
2017-10-31T02:25:27.139Z,1509416727.139 [Default:CheckIn:E] Running Loop=1
2017-10-31T02:25:27.543Z,1509416727.543 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 228.323747 min 
2017-10-31T02:25:27.543Z,1509416727.543 [Default:CheckIn:E] Stopped
2017-10-31T02:25:27.544Z,1509416727.544 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T02:25:27.544Z,1509416727.544 [Default:CheckIn] Stopped
2017-10-31T02:25:27.544Z,1509416727.544 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T02:25:27.544Z,1509416727.544 [Default:CheckIn](INFO): Running loop #18
2017-10-31T02:25:27.544Z,1509416727.544 [Default:CheckIn] Running Loop=18
2017-10-31T02:25:27.544Z,1509416727.544 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T02:25:27.544Z,1509416727.544 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T02:25:30.892Z,1509416730.892 [NAL9602](INFO): Powering up
2017-10-31T02:25:37.677Z,1509416737.677 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T02:25:39.290Z,1509416739.290 [PNI_TCM](ERROR): CRC does not match. Expected:0x62597 got:0x49992
2017-10-31T02:25:41.284Z,1509416741.284 [PNI_TCM](ERROR): CRC does not match. Expected:0x3579 got:0x58137
2017-10-31T02:25:42.063Z,1509416742.063 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:25:43.740Z,1509416743.740 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:25:43.740Z,1509416743.740 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T02:25:43.740Z,1509416743.740 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:25:43.753Z,1509416743.753 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:25:44.184Z,1509416744.184 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:25:44.184Z,1509416744.184 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T02:25:44.534Z,1509416744.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:25:44.534Z,1509416744.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:25:44.535Z,1509416744.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:25:44.565Z,1509416744.565 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:25:45.685Z,1509416745.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x23858 got:0x44480
2017-10-31T02:25:48.873Z,1509416748.873 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T02:25:49.276Z,1509416749.276 [PNI_TCM](ERROR): CRC does not match. Expected:0x33379 got:0x2845
2017-10-31T02:25:53.673Z,1509416753.673 [PNI_TCM](ERROR): CRC does not match. Expected:0x54923 got:0x61106
2017-10-31T02:25:54.076Z,1509416754.076 [PNI_TCM](ERROR): CRC does not match. Expected:0x28683 got:0x49328
2017-10-31T02:25:55.327Z,1509416755.327 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134401
CHAN A1 (24V): -0.003970
CHAN A2 (12V): -0.002139
CHAN A3 (5V): -0.000336
CHAN B0 (3.3V): 0.000061
CHAN B1 (3.15aV): -0.000345
CHAN B2 (3.15bV): -0.000700
CHAN B3 (GND): -0.000019
OPEN: -0.000477
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:25:56.883Z,1509416756.883 [PNI_TCM](ERROR): CRC does not match. Expected:0x49425 got:0x44548
2017-10-31T02:25:58.482Z,1509416758.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x61706 got:0x17945
2017-10-31T02:26:04.880Z,1509416764.880 [PNI_TCM](ERROR): CRC does not match. Expected:0x10383 got:0x17927
2017-10-31T02:26:06.480Z,1509416766.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x63762 got:0x32768
2017-10-31T02:26:08.080Z,1509416768.080 [PNI_TCM](ERROR): CRC does not match. Expected:0x5058 got:0x54552
2017-10-31T02:26:14.049Z,1509416774.049 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T02:26:14.122Z,1509416774.122 [NAL9602](FAULT): received: 
+CSQ:0

OK08, 0, 0, 0, 0

OK
2017-10-31T02:26:14.122Z,1509416774.122 [NAL9602] Data Fault, FailCount= 4
2017-10-31T02:26:14.122Z,1509416774.122 [NAL9602](ERROR): Data Fault
2017-10-31T02:26:14.258Z,1509416774.258 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T02:26:14.456Z,1509416774.456 [NAL9602](INFO): Powering down
2017-10-31T02:26:15.302Z,1509416775.302 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T02:26:15.302Z,1509416775.302 [NAL9602] No Fault, FailCount= 4
2017-10-31T02:26:17.683Z,1509416777.683 [PNI_TCM](ERROR): CRC does not match. Expected:0x11241 got:0x6591
2017-10-31T02:26:19.289Z,1509416779.289 [PNI_TCM](ERROR): CRC does not match. Expected:0x3085 got:0x18799
2017-10-31T02:26:26.102Z,1509416786.102 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16542
2017-10-31T02:26:44.808Z,1509416804.808 [NAL9602](INFO): Powering up NAL9602
2017-10-31T02:26:56.006Z,1509416816.006 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:27:25.682Z,1509416845.682 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:27:33.279Z,1509416853.279 [PNI_TCM](ERROR): CRC does not match. Expected:0x28135 got:0x44444
2017-10-31T02:27:36.089Z,1509416856.089 [PNI_TCM](ERROR): CRC does not match. Expected:0x41141 got:0x24
2017-10-31T02:27:37.299Z,1509416857.299 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T02:27:37.300Z,1509416857.300 [BPC1] Data Fault, FailCount= 1
2017-10-31T02:27:37.300Z,1509416857.300 [BPC1](ERROR): Data Fault
2017-10-31T02:27:37.330Z,1509416857.330 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:27:38.524Z,1509416858.524 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:27:38.524Z,1509416858.524 [BPC1] No Fault, FailCount= 1
2017-10-31T02:27:39.282Z,1509416859.282 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16541
2017-10-31T02:27:39.719Z,1509416859.719 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003262
CHAN A1 (24V): -0.004477
CHAN A2 (12V): -0.002706
CHAN A3 (5V): -0.000161
CHAN B0 (3.3V): 0.000176
CHAN B1 (3.15aV): 0.000248
CHAN B2 (3.15bV): -0.000101
CHAN B3 (GND): -0.000318
OPEN: -0.000254
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:27:44.086Z,1509416864.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x6647 got:0x44396
2017-10-31T02:27:45.686Z,1509416865.686 [PNI_TCM](ERROR): CRC does not match. Expected:0x56347 got:0x63769
2017-10-31T02:27:48.901Z,1509416868.901 [PNI_TCM](ERROR): CRC does not match. Expected:0x19750 got:0x25677
2017-10-31T02:27:50.484Z,1509416870.484 [PNI_TCM](ERROR): CRC does not match. Expected:0x61946 got:0x44132
2017-10-31T02:27:54.074Z,1509416874.074 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T02:27:56.886Z,1509416876.886 [PNI_TCM](ERROR): CRC does not match. Expected:0x53805 got:0x44218
2017-10-31T02:27:58.480Z,1509416878.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x19108 got:0x16965
2017-10-31T02:28:00.090Z,1509416880.090 [PNI_TCM](ERROR): CRC does not match. Expected:0x15553 got:0x6978
2017-10-31T02:28:01.687Z,1509416881.687 [PNI_TCM](ERROR): CRC does not match. Expected:0x64846 got:0x55446
2017-10-31T02:28:08.086Z,1509416888.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x48998 got:0x44825
2017-10-31T02:28:11.674Z,1509416891.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T02:28:17.687Z,1509416897.687 [PNI_TCM](ERROR): CRC does not match. Expected:0x41109 got:0x40419
2017-10-31T02:28:19.279Z,1509416899.279 [PNI_TCM](ERROR): CRC does not match. Expected:0x45963 got:0x49068
2017-10-31T02:28:19.690Z,1509416899.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x8039 got:0x10976
2017-10-31T02:28:22.482Z,1509416902.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T02:28:25.687Z,1509416905.687 [PNI_TCM](ERROR): CRC does not match. Expected:0x24221 got:0x40275
2017-10-31T02:28:44.744Z,1509416924.744 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:28:44.744Z,1509416924.744 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T02:28:44.744Z,1509416924.744 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:28:44.769Z,1509416924.769 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:28:45.122Z,1509416925.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:28:45.122Z,1509416925.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T02:28:45.508Z,1509416925.508 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:28:45.509Z,1509416925.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:28:45.509Z,1509416925.509 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:29:09.909Z,1509416949.909 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:29:20.711Z,1509416960.711 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134315
CHAN A1 (24V): -0.003836
CHAN A2 (12V): -0.002156
CHAN A3 (5V): -0.000335
CHAN B0 (3.3V): -0.000043
CHAN B1 (3.15aV): 0.000378
CHAN B2 (3.15bV): -0.000367
CHAN B3 (GND): -0.000322
OPEN: -0.000392
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:30:27.794Z,1509417027.794 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T02:25:27.5Z
2017-10-31T02:30:27.794Z,1509417027.794 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T02:30:27.794Z,1509417027.794 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T02:30:32.758Z,1509417032.758 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0108.lzma
2017-10-31T02:30:33.498Z,1509417033.498 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0108.lzma.bak
2017-10-31T02:30:33.499Z,1509417033.499 [DataOverHttps](INFO): SBD MOMSN=5177783
2017-10-31T02:30:42.782Z,1509417042.782 [DataOverHttps](INFO): Sending 650 bytes from file Logs/20171030T210256/Express0109.lzma
2017-10-31T02:30:43.550Z,1509417043.550 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0109.lzma.bak
2017-10-31T02:30:43.551Z,1509417043.551 [DataOverHttps](INFO): SBD MOMSN=5177785
2017-10-31T02:30:44.027Z,1509417044.027 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T02:30:44.028Z,1509417044.028 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T02:30:44.028Z,1509417044.028 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T02:30:47.683Z,1509417047.683 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T02:30:51.020Z,1509417051.020 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:31:01.873Z,1509417061.873 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 4.661218
CHAN A1 (24V): -0.004391
CHAN A2 (12V): -0.001980
CHAN A3 (5V): 0.000526
CHAN B0 (3.3V): -0.000378
CHAN B1 (3.15aV): -0.000319
CHAN B2 (3.15bV): -0.000123
CHAN B3 (GND): -0.000633
OPEN: -0.000656
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:31:06.597Z,1509417066.597 [BPC1](ERROR): Failed to receive battery data
2017-10-31T02:31:06.597Z,1509417066.597 [BPC1] Communications Fault, FailCount= 1
2017-10-31T02:31:06.597Z,1509417066.597 [BPC1](ERROR): Communications Fault
2017-10-31T02:31:06.657Z,1509417066.657 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T02:31:07.823Z,1509417067.823 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:31:07.823Z,1509417067.823 [BPC1] No Fault, FailCount= 1
2017-10-31T02:31:18.160Z,1509417078.160 [NAL9602](INFO): Powering down
2017-10-31T02:31:47.970Z,1509417107.970 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:31:47.970Z,1509417107.970 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T02:31:47.970Z,1509417107.970 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:31:48.015Z,1509417108.015 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:31:48.199Z,1509417108.199 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:31:48.199Z,1509417108.199 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T02:31:48.497Z,1509417108.497 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:31:48.498Z,1509417108.498 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:31:48.499Z,1509417108.499 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:32:32.090Z,1509417152.090 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:32:34.069Z,1509417154.069 [BPC1](ERROR): Failed to receive battery data
2017-10-31T02:32:34.069Z,1509417154.069 [BPC1] Communications Fault, FailCount= 1
2017-10-31T02:32:34.069Z,1509417154.069 [BPC1](ERROR): Communications Fault
2017-10-31T02:32:34.095Z,1509417154.095 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T02:32:35.334Z,1509417155.334 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:32:35.334Z,1509417155.334 [BPC1] No Fault, FailCount= 1
2017-10-31T02:32:42.907Z,1509417162.907 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002989
CHAN A1 (24V): -0.003418
CHAN A2 (12V): -0.002189
CHAN A3 (5V): 0.000259
CHAN B0 (3.3V): -0.000184
CHAN B1 (3.15aV): -0.000617
CHAN B2 (3.15bV): -0.000473
CHAN B3 (GND): 0.000185
OPEN: -0.000621
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:33:15.842Z,1509417195.842 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T02:34:01.647Z,1509417241.647 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T02:34:01.647Z,1509417241.647 [BPC1] Data Fault, FailCount= 1
2017-10-31T02:34:01.647Z,1509417241.647 [BPC1](ERROR): Data Fault
2017-10-31T02:34:01.671Z,1509417241.671 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:34:02.864Z,1509417242.864 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:34:02.864Z,1509417242.864 [BPC1] No Fault, FailCount= 1
2017-10-31T02:34:12.924Z,1509417252.924 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:34:22.434Z,1509417262.434 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T02:34:22.434Z,1509417262.434 [BPC1] Data Fault, FailCount= 2
2017-10-31T02:34:22.434Z,1509417262.434 [BPC1](ERROR): Data Fault
2017-10-31T02:34:22.498Z,1509417262.498 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:34:23.733Z,1509417263.733 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:34:23.734Z,1509417263.734 [BPC1] No Fault, FailCount= 2
2017-10-31T02:34:23.754Z,1509417263.754 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003620
CHAN A1 (24V): -0.002902
CHAN A2 (12V): -0.002086
CHAN A3 (5V): 0.000089
CHAN B0 (3.3V): 0.000400
CHAN B1 (3.15aV): -0.000026
CHAN B2 (3.15bV): 0.000101
CHAN B3 (GND): 0.000079
OPEN: -0.000371
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:34:48.640Z,1509417288.640 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:34:48.640Z,1509417288.640 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T02:34:48.640Z,1509417288.640 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:34:48.653Z,1509417288.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:34:48.776Z,1509417288.776 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:34:48.776Z,1509417288.776 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T02:34:49.156Z,1509417289.156 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:34:49.156Z,1509417289.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:34:49.157Z,1509417289.157 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:35:44.727Z,1509417344.727 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T02:35:44.728Z,1509417344.728 [Default:CheckIn:C.Wait] Stopped
2017-10-31T02:35:44.728Z,1509417344.728 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T02:35:44.728Z,1509417344.728 [Default:CheckIn:D] Running Loop=1
2017-10-31T02:35:45.120Z,1509417345.120 [Default:CheckIn:D] Stopped
2017-10-31T02:35:45.120Z,1509417345.120 [Default:CheckIn:E] Running Loop=1
2017-10-31T02:35:45.531Z,1509417345.531 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 238.623437 min 
2017-10-31T02:35:45.532Z,1509417345.532 [Default:CheckIn:E] Stopped
2017-10-31T02:35:45.532Z,1509417345.532 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T02:35:45.532Z,1509417345.532 [Default:CheckIn] Stopped
2017-10-31T02:35:45.532Z,1509417345.532 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T02:35:45.532Z,1509417345.532 [Default:CheckIn](INFO): Running loop #19
2017-10-31T02:35:45.532Z,1509417345.532 [Default:CheckIn] Running Loop=19
2017-10-31T02:35:45.532Z,1509417345.532 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T02:35:45.532Z,1509417345.532 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T02:35:48.877Z,1509417348.877 [NAL9602](INFO): Powering up
2017-10-31T02:35:54.167Z,1509417354.167 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:36:00.038Z,1509417360.038 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:36:00.835Z,1509417360.835 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T02:36:00.835Z,1509417360.835 [NAL9602] Data Fault, FailCount= 5
2017-10-31T02:36:00.835Z,1509417360.835 [NAL9602](ERROR): Data Fault
2017-10-31T02:36:00.902Z,1509417360.902 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T02:36:00.902Z,1509417360.902 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T02:36:01.233Z,1509417361.233 [NAL9602](INFO): Powering down
2017-10-31T02:36:01.332Z,1509417361.332 [CBIT](INFO): Critical error at 20171031T023600
2017-10-31T02:36:04.963Z,1509417364.963 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133947
CHAN A1 (24V): 4.657929
CHAN A2 (12V): -0.002121
CHAN A3 (5V): 0.000435
CHAN B0 (3.3V): -0.000039
CHAN B1 (3.15aV): 0.000270
CHAN B2 (3.15bV): 0.000137
CHAN B3 (GND): 0.000015
OPEN: -0.000809
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:36:59.832Z,1509417419.832 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T02:36:59.832Z,1509417419.832 [BPC1] Data Fault, FailCount= 1
2017-10-31T02:36:59.832Z,1509417419.832 [BPC1](ERROR): Data Fault
2017-10-31T02:36:59.900Z,1509417419.900 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:37:01.058Z,1509417421.058 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:37:01.058Z,1509417421.058 [BPC1] No Fault, FailCount= 1
2017-10-31T02:37:35.076Z,1509417455.076 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:37:45.879Z,1509417465.879 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003565
CHAN A1 (24V): -0.003536
CHAN A2 (12V): -0.002354
CHAN A3 (5V): 0.000332
CHAN B0 (3.3V): -0.000121
CHAN B1 (3.15aV): 0.000033
CHAN B2 (3.15bV): -0.000251
CHAN B3 (GND): 0.000305
OPEN: -0.000412
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:37:49.199Z,1509417469.199 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:37:49.199Z,1509417469.199 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T02:37:49.199Z,1509417469.199 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:37:49.246Z,1509417469.246 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:37:49.360Z,1509417469.360 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:37:49.360Z,1509417469.360 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T02:37:49.705Z,1509417469.705 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:37:49.705Z,1509417469.705 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:37:49.706Z,1509417469.706 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:37:55.312Z,1509417475.312 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T02:38:00.949Z,1509417480.949 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T02:38:00.949Z,1509417480.949 [NAL9602] No Fault, FailCount= 5
2017-10-31T02:38:01.265Z,1509417481.265 [NAL9602](INFO): Powering up NAL9602
2017-10-31T02:38:02.100Z,1509417482.100 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T02:38:12.475Z,1509417492.475 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:38:21.712Z,1509417501.712 [PNI_TCM](ERROR): CRC does not match. Expected:0x61576 got:0x8987
2017-10-31T02:38:44.902Z,1509417524.902 [PNI_TCM](ERROR): CRC does not match. Expected:0x16984 got:0x6591
2017-10-31T02:38:49.609Z,1509417529.609 [PNI_TCM](ERROR): CRC does not match. Expected:0x63562 got:0x45451
2017-10-31T02:38:49.609Z,1509417529.609 [PNI_TCM](ERROR): CRC does not match. Expected:0x42027 got:0x45206
2017-10-31T02:38:49.609Z,1509417529.609 [PNI_TCM](ERROR): CRC does not match. Expected:0x45510 got:0x45215
2017-10-31T02:38:49.610Z,1509417529.610 [PNI_TCM](ERROR): CRC does not match. Expected:0x3495 got:0x45171
2017-10-31T02:38:49.610Z,1509417529.610 [PNI_TCM](ERROR): CRC does not match. Expected:0x43411 got:0x45391
2017-10-31T02:38:49.611Z,1509417529.611 [PNI_TCM](ERROR): CRC does not match. Expected:0x43672 got:0x45537
2017-10-31T02:38:49.611Z,1509417529.611 [PNI_TCM](ERROR): CRC does not match. Expected:0x10192 got:0x45477
2017-10-31T02:38:49.611Z,1509417529.611 [PNI_TCM](ERROR): CRC does not match. Expected:0x50142 got:0x45422
2017-10-31T02:39:16.215Z,1509417556.215 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:39:27.025Z,1509417567.025 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134462
CHAN A1 (24V): -0.003759
CHAN A2 (12V): -0.002283
CHAN A3 (5V): 0.000653
CHAN B0 (3.3V): -0.000037
CHAN B1 (3.15aV): -0.000055
CHAN B2 (3.15bV): -0.000189
CHAN B3 (GND): 0.000411
OPEN: -0.000580
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:40:42.752Z,1509417642.752 [NAL9602](INFO): SBD MO Status=0, MOMSN=3309, MT Status=0, MTMSN=0
2017-10-31T02:40:42.752Z,1509417642.752 [NAL9602](INFO): No messages in MT queue
2017-10-31T02:40:42.752Z,1509417642.752 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2017-10-31T02:40:45.586Z,1509417645.586 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T02:35:45.5Z
2017-10-31T02:40:45.587Z,1509417645.587 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T02:40:45.587Z,1509417645.587 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T02:40:49.739Z,1509417649.739 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171030T210256/Courier0112.lzma
2017-10-31T02:40:49.791Z,1509417649.791 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:40:49.791Z,1509417649.791 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T02:40:49.791Z,1509417649.791 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:40:49.805Z,1509417649.805 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:40:50.178Z,1509417650.178 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:40:50.178Z,1509417650.178 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T02:40:50.498Z,1509417650.498 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0112.lzma.bak
2017-10-31T02:40:50.498Z,1509417650.498 [DataOverHttps](INFO): SBD MOMSN=5177802
2017-10-31T02:40:50.558Z,1509417650.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:40:50.559Z,1509417650.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:40:50.559Z,1509417650.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:40:59.661Z,1509417659.661 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:41:00.082Z,1509417660.082 [DataOverHttps](INFO): Sending 663 bytes from file Logs/20171030T210256/Express0113.lzma
2017-10-31T02:41:00.874Z,1509417660.874 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0113.lzma.bak
2017-10-31T02:41:00.875Z,1509417660.875 [DataOverHttps](INFO): SBD MOMSN=5177805
2017-10-31T02:41:01.371Z,1509417661.371 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T02:41:01.372Z,1509417661.372 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T02:41:01.372Z,1509417661.372 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T02:41:13.233Z,1509417673.233 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002817
CHAN A1 (24V): -0.004295
CHAN A2 (12V): -0.002151
CHAN A3 (5V): 0.000132
CHAN B0 (3.3V): -0.000115
CHAN B1 (3.15aV): -0.000082
CHAN B2 (3.15bV): -0.000264
CHAN B3 (GND): 0.000293
OPEN: -0.000233
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:41:15.973Z,1509417675.973 [NAL9602](INFO): Powering down
2017-10-31T02:42:43.470Z,1509417763.470 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:42:54.289Z,1509417774.289 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002636
CHAN A1 (24V): -0.003559
CHAN A2 (12V): -0.002683
CHAN A3 (5V): 0.000195
CHAN B0 (3.3V): 0.000567
CHAN B1 (3.15aV): -0.000444
CHAN B2 (3.15bV): -0.000508
CHAN B3 (GND): -0.000612
OPEN: -0.000327
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:43:16.190Z,1509417796.190 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T02:43:50.566Z,1509417830.566 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:43:50.566Z,1509417830.566 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T02:43:50.566Z,1509417830.566 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:43:50.579Z,1509417830.579 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:43:50.982Z,1509417830.982 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T02:43:50.982Z,1509417830.982 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T02:43:51.367Z,1509417831.367 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T02:43:51.367Z,1509417831.367 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T02:43:51.368Z,1509417831.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T02:44:24.438Z,1509417864.438 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:44:35.175Z,1509417875.175 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134403
CHAN A1 (24V): -0.003609
CHAN A2 (12V): -0.002301
CHAN A3 (5V): 0.000607
CHAN B0 (3.3V): 0.000167
CHAN B1 (3.15aV): -0.000478
CHAN B2 (3.15bV): -0.000122
CHAN B3 (GND): -0.000145
OPEN: -0.000424
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:45:50.278Z,1509417950.278 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T02:45:50.278Z,1509417950.278 [BPC1] Data Fault, FailCount= 1
2017-10-31T02:45:50.278Z,1509417950.278 [BPC1](ERROR): Data Fault
2017-10-31T02:45:50.324Z,1509417950.324 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:45:51.513Z,1509417951.513 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:45:51.513Z,1509417951.513 [BPC1] No Fault, FailCount= 1
2017-10-31T02:46:01.879Z,1509417961.879 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T02:46:01.879Z,1509417961.879 [Default:CheckIn:C.Wait] Stopped
2017-10-31T02:46:01.879Z,1509417961.879 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T02:46:01.904Z,1509417961.904 [Default:CheckIn:D] Running Loop=1
2017-10-31T02:46:02.301Z,1509417962.301 [Default:CheckIn:D] Stopped
2017-10-31T02:46:02.301Z,1509417962.301 [Default:CheckIn:E] Running Loop=1
2017-10-31T02:46:02.680Z,1509417962.680 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 248.909798 min 
2017-10-31T02:46:02.681Z,1509417962.681 [Default:CheckIn:E] Stopped
2017-10-31T02:46:02.681Z,1509417962.681 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T02:46:02.681Z,1509417962.681 [Default:CheckIn] Stopped
2017-10-31T02:46:02.681Z,1509417962.681 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T02:46:02.681Z,1509417962.681 [Default:CheckIn](INFO): Running loop #20
2017-10-31T02:46:02.681Z,1509417962.681 [Default:CheckIn] Running Loop=20
2017-10-31T02:46:02.681Z,1509417962.681 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T02:46:02.682Z,1509417962.682 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T02:46:06.501Z,1509417966.501 [NAL9602](INFO): Powering up
2017-10-31T02:46:06.588Z,1509417966.588 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:46:17.101Z,1509417977.101 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003220
CHAN A1 (24V): -0.004419
CHAN A2 (12V): -0.002079
CHAN A3 (5V): 0.000460
CHAN B0 (3.3V): 0.000157
CHAN B1 (3.15aV): -0.000584
CHAN B2 (3.15bV): -0.000013
CHAN B3 (GND): 0.000120
OPEN: -0.000470
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:46:17.410Z,1509417977.410 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:46:51.461Z,1509418011.461 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T02:46:51.461Z,1509418011.461 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T02:46:51.461Z,1509418011.461 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T02:46:51.498Z,1509418011.498 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:46:51.499Z,1509418011.499 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T02:47:47.266Z,1509418067.266 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:47:58.065Z,1509418078.065 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134434
CHAN A1 (24V): -0.003259
CHAN A2 (12V): -0.002179
CHAN A3 (5V): -0.000033
CHAN B0 (3.3V): 0.000028
CHAN B1 (3.15aV): -0.000519
CHAN B2 (3.15bV): -0.000375
CHAN B3 (GND): 0.000206
OPEN: -0.000591
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:48:08.200Z,1509418088.200 [NAL9602](INFO): SBD MO Status=2, MOMSN=3310, MT Status=2, MTMSN=0
2017-10-31T02:48:08.201Z,1509418088.201 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T02:48:25.794Z,1509418105.794 [NAL9602](INFO): SBD MO Status=2, MOMSN=3310, MT Status=2, MTMSN=0
2017-10-31T02:48:25.794Z,1509418105.794 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T02:48:54.199Z,1509418134.199 [NAL9602](INFO): SBD MO Status=2, MOMSN=3310, MT Status=2, MTMSN=0
2017-10-31T02:48:54.199Z,1509418134.199 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T02:49:17.528Z,1509418157.528 [NAL9602](INFO): SBD MO Status=2, MOMSN=3310, MT Status=2, MTMSN=0
2017-10-31T02:49:17.528Z,1509418157.528 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T02:49:28.403Z,1509418168.403 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:49:38.725Z,1509418178.725 [NAL9602](INFO): SBD MO Status=2, MOMSN=3310, MT Status=2, MTMSN=0
2017-10-31T02:49:38.726Z,1509418178.726 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T02:49:39.216Z,1509418179.216 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002829
CHAN A1 (24V): -0.004106
CHAN A2 (12V): -0.002248
CHAN A3 (5V): -0.000342
CHAN B0 (3.3V): -0.000054
CHAN B1 (3.15aV): -0.000369
CHAN B2 (3.15bV): -0.000452
CHAN B3 (GND): -0.000235
OPEN: -0.000245
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:49:55.929Z,1509418195.929 [NAL9602](INFO): SBD MO Status=0, MOMSN=3310, MT Status=0, MTMSN=0
2017-10-31T02:49:55.929Z,1509418195.929 [NAL9602](INFO): No messages in MT queue
2017-10-31T02:49:56.725Z,1509418196.725 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T02:49:56.725Z,1509418196.725 [NAL9602] Data Fault, FailCount= 1
2017-10-31T02:49:56.725Z,1509418196.725 [NAL9602](ERROR): Data Fault
2017-10-31T02:49:56.811Z,1509418196.811 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T02:49:57.131Z,1509418197.131 [NAL9602](INFO): Powering down
2017-10-31T02:49:57.532Z,1509418197.532 [NAL9602](FAULT): LCB fault:  Software Overcurrent.
2017-10-31T02:49:57.532Z,1509418197.532 [NAL9602] Hardware Fault, FailCount= 1
2017-10-31T02:49:57.532Z,1509418197.532 [NAL9602](ERROR): Hardware Fault
2017-10-31T02:49:58.011Z,1509418198.011 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T02:49:58.011Z,1509418198.011 [NAL9602] No Fault, FailCount= 1
2017-10-31T02:50:27.469Z,1509418227.469 [NAL9602](INFO): Powering up NAL9602
2017-10-31T02:50:38.278Z,1509418238.278 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:50:47.909Z,1509418247.909 [BPC1](ERROR): Failed to receive battery data
2017-10-31T02:50:47.909Z,1509418247.909 [BPC1] Communications Fault, FailCount= 1
2017-10-31T02:50:47.909Z,1509418247.909 [BPC1](ERROR): Communications Fault
2017-10-31T02:50:47.953Z,1509418247.953 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T02:50:49.141Z,1509418249.141 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:50:49.141Z,1509418249.141 [BPC1] No Fault, FailCount= 1
2017-10-31T02:51:02.716Z,1509418262.716 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T02:46:02.7Z
2017-10-31T02:51:02.716Z,1509418262.716 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T02:51:02.716Z,1509418262.716 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T02:51:07.279Z,1509418267.279 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0116.lzma
2017-10-31T02:51:08.030Z,1509418268.030 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0116.lzma.bak
2017-10-31T02:51:08.031Z,1509418268.031 [DataOverHttps](INFO): SBD MOMSN=5177823
2017-10-31T02:51:12.195Z,1509418272.195 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:51:17.240Z,1509418277.240 [DataOverHttps](INFO): Sending 668 bytes from file Logs/20171030T210256/Express0117.lzma
2017-10-31T02:51:18.042Z,1509418278.042 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0117.lzma.bak
2017-10-31T02:51:18.042Z,1509418278.042 [DataOverHttps](INFO): SBD MOMSN=5177825
2017-10-31T02:51:18.513Z,1509418278.513 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T02:51:18.513Z,1509418278.513 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T02:51:18.513Z,1509418278.513 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T02:51:27.653Z,1509418287.653 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134010
CHAN A1 (24V): -0.004559
CHAN A2 (12V): -0.002065
CHAN A3 (5V): 0.000254
CHAN B0 (3.3V): -0.000059
CHAN B1 (3.15aV): 0.000127
CHAN B2 (3.15bV): -0.000169
CHAN B3 (GND): 0.000006
OPEN: -0.000435
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:51:33.185Z,1509418293.185 [NAL9602](INFO): Powering down
2017-10-31T02:51:52.827Z,1509418312.827 [BPC1](ERROR): Failed to parse message.
2017-10-31T02:51:52.827Z,1509418312.827 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T02:51:52.827Z,1509418312.827 [BPC1] Data Fault, FailCount= 1
2017-10-31T02:51:52.827Z,1509418312.827 [BPC1](ERROR): Data Fault
2017-10-31T02:51:52.881Z,1509418312.881 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T02:51:54.072Z,1509418314.072 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T02:51:54.072Z,1509418314.072 [BPC1] No Fault, FailCount= 1
2017-10-31T02:52:57.814Z,1509418377.814 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:53:08.628Z,1509418388.628 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135107
CHAN A1 (24V): -0.003361
CHAN A2 (12V): -0.002315
CHAN A3 (5V): 0.000256
CHAN B0 (3.3V): 0.000069
CHAN B1 (3.15aV): 0.000192
CHAN B2 (3.15bV): 0.000139
CHAN B3 (GND): 0.000165
OPEN: -0.000695
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:53:16.220Z,1509418396.220 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T02:54:38.798Z,1509418478.798 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:54:49.600Z,1509418489.600 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002873
CHAN A1 (24V): -0.003647
CHAN A2 (12V): -0.002480
CHAN A3 (5V): 0.000254
CHAN B0 (3.3V): -0.000098
CHAN B1 (3.15aV): 0.000011
CHAN B2 (3.15bV): -0.000075
CHAN B3 (GND): -0.000003
OPEN: -0.000229
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:56:18.933Z,1509418578.933 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T02:56:18.933Z,1509418578.933 [Default:CheckIn:C.Wait] Stopped
2017-10-31T02:56:18.933Z,1509418578.933 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T02:56:18.934Z,1509418578.934 [Default:CheckIn:D] Running Loop=1
2017-10-31T02:56:19.329Z,1509418579.329 [Default:CheckIn:D] Stopped
2017-10-31T02:56:19.329Z,1509418579.329 [Default:CheckIn:E] Running Loop=1
2017-10-31T02:56:19.721Z,1509418579.721 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 259.193571 min 
2017-10-31T02:56:19.722Z,1509418579.722 [Default:CheckIn:E] Stopped
2017-10-31T02:56:19.722Z,1509418579.722 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T02:56:19.722Z,1509418579.722 [Default:CheckIn] Stopped
2017-10-31T02:56:19.722Z,1509418579.722 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T02:56:19.722Z,1509418579.722 [Default:CheckIn](INFO): Running loop #21
2017-10-31T02:56:19.722Z,1509418579.722 [Default:CheckIn] Running Loop=21
2017-10-31T02:56:19.723Z,1509418579.723 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T02:56:19.723Z,1509418579.723 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T02:56:19.746Z,1509418579.746 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:56:24.064Z,1509418584.064 [NAL9602](INFO): Powering up
2017-10-31T02:56:33.711Z,1509418593.711 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134110
CHAN A1 (24V): -0.004430
CHAN A2 (12V): -0.002332
CHAN A3 (5V): -0.000056
CHAN B0 (3.3V): 0.000319
CHAN B1 (3.15aV): -0.000228
CHAN B2 (3.15bV): -0.000460
CHAN B3 (GND): 0.000461
OPEN: -0.000679
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:56:35.181Z,1509418595.181 [NAL9602](INFO): NAL9602 initialized
2017-10-31T02:57:25.519Z,1509418645.519 [NAL9602](INFO): SBD MO Status=2, MOMSN=3311, MT Status=2, MTMSN=0
2017-10-31T02:57:25.520Z,1509418645.520 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T02:57:45.523Z,1509418665.523 [NAL9602](INFO): SBD MO Status=2, MOMSN=3311, MT Status=2, MTMSN=0
2017-10-31T02:57:45.523Z,1509418665.523 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T02:57:55.920Z,1509418675.920 [NAL9602](INFO): SBD MO Status=0, MOMSN=3311, MT Status=0, MTMSN=0
2017-10-31T02:57:55.920Z,1509418675.920 [NAL9602](INFO): No messages in MT queue
2017-10-31T02:58:04.006Z,1509418684.006 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:58:14.806Z,1509418694.806 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003167
CHAN A1 (24V): -0.003788
CHAN A2 (12V): -0.002115
CHAN A3 (5V): 0.000008
CHAN B0 (3.3V): -0.000122
CHAN B1 (3.15aV): 0.000080
CHAN B2 (3.15bV): -0.000285
CHAN B3 (GND): 0.000177
OPEN: -0.000498
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T02:59:45.101Z,1509418785.101 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T02:59:55.897Z,1509418795.897 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134856
CHAN A1 (24V): -0.003854
CHAN A2 (12V): -0.001885
CHAN A3 (5V): 0.000292
CHAN B0 (3.3V): -0.000313
CHAN B1 (3.15aV): -0.000322
CHAN B2 (3.15bV): -0.000243
CHAN B3 (GND): 0.000088
OPEN: -0.000133
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:00:05.836Z,1509418805.836 [NAL9602](INFO): GPS fix at 20171031T030004: (36.802741, -121.788066)
2017-10-31T03:00:05.908Z,1509418805.908 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T03:00:05.909Z,1509418805.909 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T03:00:06.680Z,1509418806.680 [BPC1](ERROR): Failed to parse message.
2017-10-31T03:00:06.680Z,1509418806.680 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:00:06.680Z,1509418806.680 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:00:06.680Z,1509418806.680 [BPC1](ERROR): Data Fault
2017-10-31T03:00:06.702Z,1509418806.702 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:00:10.490Z,1509418810.490 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20171030T210256/Courier0120.lzma
2017-10-31T03:00:10.577Z,1509418810.577 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:00:10.577Z,1509418810.577 [BPC1] No Fault, FailCount= 1
2017-10-31T03:00:11.238Z,1509418811.238 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0120.lzma.bak
2017-10-31T03:00:11.239Z,1509418811.239 [DataOverHttps](INFO): SBD MOMSN=5177845
2017-10-31T03:00:20.396Z,1509418820.396 [DataOverHttps](INFO): Sending 546 bytes from file Logs/20171030T210256/Express0121.lzma
2017-10-31T03:00:21.145Z,1509418821.145 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0121.lzma.bak
2017-10-31T03:00:21.145Z,1509418821.145 [DataOverHttps](INFO): SBD MOMSN=5177848
2017-10-31T03:00:21.612Z,1509418821.612 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T03:00:21.612Z,1509418821.612 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T03:00:21.612Z,1509418821.612 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T03:00:35.514Z,1509418835.514 [BPC1](ERROR): Failed to receive battery data
2017-10-31T03:00:35.515Z,1509418835.515 [BPC1] Communications Fault, FailCount= 2
2017-10-31T03:00:35.515Z,1509418835.515 [BPC1](ERROR): Communications Fault
2017-10-31T03:00:35.566Z,1509418835.566 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T03:00:36.740Z,1509418836.740 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:00:36.740Z,1509418836.740 [BPC1] No Fault, FailCount= 2
2017-10-31T03:00:40.675Z,1509418840.675 [NAL9602](INFO): Powering down
2017-10-31T03:01:26.130Z,1509418886.130 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:01:36.925Z,1509418896.925 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003052
CHAN A1 (24V): -0.004062
CHAN A2 (12V): -0.002612
CHAN A3 (5V): 0.000320
CHAN B0 (3.3V): -0.000675
CHAN B1 (3.15aV): -0.000348
CHAN B2 (3.15bV): -0.000335
CHAN B3 (GND): 0.000008
OPEN: -0.000121
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:01:51.704Z,1509418911.704 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:01:51.704Z,1509418911.704 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T03:01:52.107Z,1509418912.107 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:01:52.107Z,1509418912.107 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:01:52.108Z,1509418912.108 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:01:52.503Z,1509418912.503 [DeadReckonWithRespectToSeafloor](INFO): Failure count cleared after critical for DeadReckonWithRespectToSeafloor
2017-10-31T03:03:07.092Z,1509418987.092 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:03:09.859Z,1509418989.859 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:03:09.859Z,1509418989.859 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:03:09.859Z,1509418989.859 [BPC1](ERROR): Data Fault
2017-10-31T03:03:09.917Z,1509418989.917 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:03:11.113Z,1509418991.113 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:03:11.113Z,1509418991.113 [BPC1] No Fault, FailCount= 1
2017-10-31T03:03:16.388Z,1509418996.388 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T03:03:17.890Z,1509418997.890 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003729
CHAN A1 (24V): -0.003398
CHAN A2 (12V): -0.002053
CHAN A3 (5V): -0.000062
CHAN B0 (3.3V): -0.000355
CHAN B1 (3.15aV): -0.000189
CHAN B2 (3.15bV): -0.000852
CHAN B3 (GND): -0.000200
OPEN: -0.000118
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:04:47.922Z,1509419087.922 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:04:52.269Z,1509419092.269 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:04:52.269Z,1509419092.269 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T03:04:52.269Z,1509419092.269 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:04:52.303Z,1509419092.303 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:04:52.679Z,1509419092.679 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:04:52.679Z,1509419092.679 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T03:04:53.068Z,1509419093.068 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:04:53.069Z,1509419093.069 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:04:53.069Z,1509419093.069 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:04:58.741Z,1509419098.741 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135196
CHAN A1 (24V): -0.003377
CHAN A2 (12V): -0.002139
CHAN A3 (5V): 0.000168
CHAN B0 (3.3V): -0.000325
CHAN B1 (3.15aV): 0.000066
CHAN B2 (3.15bV): -0.000331
CHAN B3 (GND): -0.000174
OPEN: -0.000457
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:05:22.293Z,1509419122.293 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T03:05:22.293Z,1509419122.293 [Default:CheckIn:C.Wait] Stopped
2017-10-31T03:05:22.293Z,1509419122.293 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T03:05:22.294Z,1509419122.294 [Default:CheckIn:D] Running Loop=1
2017-10-31T03:05:22.680Z,1509419122.680 [Default:CheckIn:D] Stopped
2017-10-31T03:05:22.680Z,1509419122.680 [Default:CheckIn:E] Running Loop=1
2017-10-31T03:05:23.073Z,1509419123.073 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 268.249447 min 
2017-10-31T03:05:23.073Z,1509419123.073 [Default:CheckIn:E] Stopped
2017-10-31T03:05:23.073Z,1509419123.073 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T03:05:23.073Z,1509419123.073 [Default:CheckIn] Stopped
2017-10-31T03:05:23.073Z,1509419123.073 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T03:05:23.074Z,1509419123.074 [Default:CheckIn](INFO): Running loop #22
2017-10-31T03:05:23.074Z,1509419123.074 [Default:CheckIn] Running Loop=22
2017-10-31T03:05:23.074Z,1509419123.074 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T03:05:23.074Z,1509419123.074 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T03:05:26.490Z,1509419126.490 [NAL9602](INFO): Powering up
2017-10-31T03:05:37.652Z,1509419137.652 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:06:28.973Z,1509419188.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x40595 got:0x49152
2017-10-31T03:06:29.013Z,1509419189.013 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:06:35.364Z,1509419195.364 [PNI_TCM](ERROR): CRC does not match. Expected:0x28323 got:0x7490
2017-10-31T03:06:38.571Z,1509419198.571 [PNI_TCM](ERROR): CRC does not match. Expected:0x44188 got:0x44288
2017-10-31T03:06:39.793Z,1509419199.793 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002582
CHAN A1 (24V): -0.004397
CHAN A2 (12V): -0.002145
CHAN A3 (5V): 0.000301
CHAN B0 (3.3V): 0.000026
CHAN B1 (3.15aV): -0.000535
CHAN B2 (3.15bV): -0.000154
CHAN B3 (GND): -0.000207
OPEN: -0.000394
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:06:41.768Z,1509419201.768 [PNI_TCM](ERROR): CRC does not match. Expected:0x58263 got:0x61074
2017-10-31T03:06:43.366Z,1509419203.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x26427 got:0x16812
2017-10-31T03:06:44.970Z,1509419204.970 [PNI_TCM](ERROR): CRC does not match. Expected:0x19565 got:0x18717
2017-10-31T03:06:46.580Z,1509419206.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T03:06:56.168Z,1509419216.168 [PNI_TCM](ERROR): CRC does not match. Expected:0x16239 got:0x44224
2017-10-31T03:06:57.767Z,1509419217.767 [PNI_TCM](ERROR): CRC does not match. Expected:0x56205 got:0x49328
2017-10-31T03:07:00.964Z,1509419220.964 [PNI_TCM](ERROR): CRC does not match. Expected:0x11812 got:0x6335
2017-10-31T03:07:05.336Z,1509419225.336 [NAL9602](INFO): SBD MO Status=2, MOMSN=3312, MT Status=2, MTMSN=0
2017-10-31T03:07:05.336Z,1509419225.336 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:07:05.765Z,1509419225.765 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T03:07:08.961Z,1509419228.961 [PNI_TCM](ERROR): CRC does not match. Expected:0x60009 got:0x6591
2017-10-31T03:07:10.565Z,1509419230.565 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T03:07:13.766Z,1509419233.766 [PNI_TCM](ERROR): CRC does not match. Expected:0x64725 got:0x16384
2017-10-31T03:07:15.371Z,1509419235.371 [PNI_TCM](ERROR): CRC does not match. Expected:0x35033 got:0x8413
2017-10-31T03:07:17.358Z,1509419237.358 [PNI_TCM](ERROR): CRC does not match. Expected:0x4761 got:0x44352
2017-10-31T03:07:17.733Z,1509419237.733 [NAL9602](INFO): SBD MO Status=2, MOMSN=3312, MT Status=2, MTMSN=0
2017-10-31T03:07:17.733Z,1509419237.733 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:07:21.762Z,1509419241.762 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T03:07:23.367Z,1509419243.367 [PNI_TCM](ERROR): CRC does not match. Expected:0x8428 got:0x48157
2017-10-31T03:07:38.558Z,1509419258.558 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:07:38.558Z,1509419258.558 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:07:38.558Z,1509419258.558 [BPC1](ERROR): Data Fault
2017-10-31T03:07:38.581Z,1509419258.581 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:07:39.781Z,1509419259.781 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:07:39.781Z,1509419259.781 [BPC1] No Fault, FailCount= 1
2017-10-31T03:07:42.107Z,1509419262.107 [NAL9602](INFO): SBD MO Status=2, MOMSN=3312, MT Status=2, MTMSN=0
2017-10-31T03:07:42.107Z,1509419262.107 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:07:53.364Z,1509419273.364 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:07:53.364Z,1509419273.364 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T03:07:53.364Z,1509419273.364 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:07:53.396Z,1509419273.396 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:07:53.774Z,1509419273.774 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:07:53.774Z,1509419273.774 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T03:07:54.144Z,1509419274.144 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:07:54.145Z,1509419274.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:07:54.145Z,1509419274.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:08:04.518Z,1509419284.518 [NAL9602](INFO): SBD MO Status=0, MOMSN=3312, MT Status=0, MTMSN=0
2017-10-31T03:08:04.518Z,1509419284.518 [NAL9602](INFO): No messages in MT queue
2017-10-31T03:08:09.822Z,1509419289.822 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:08:20.619Z,1509419300.619 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003320
CHAN A1 (24V): 4.657929
CHAN A2 (12V): -0.002007
CHAN A3 (5V): 0.000204
CHAN B0 (3.3V): 0.000011
CHAN B1 (3.15aV): 0.000352
CHAN B2 (3.15bV): -0.000304
CHAN B3 (GND): 0.000297
OPEN: -0.000224
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:08:52.757Z,1509419332.757 [BPC1](ERROR): Failed to receive battery data
2017-10-31T03:08:52.757Z,1509419332.757 [BPC1] Communications Fault, FailCount= 1
2017-10-31T03:08:52.757Z,1509419332.757 [BPC1](ERROR): Communications Fault
2017-10-31T03:08:52.820Z,1509419332.820 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T03:08:53.971Z,1509419333.971 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:08:53.971Z,1509419333.971 [BPC1] No Fault, FailCount= 1
2017-10-31T03:09:50.978Z,1509419390.978 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:10:01.788Z,1509419401.788 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002956
CHAN A1 (24V): -0.004254
CHAN A2 (12V): -0.002359
CHAN A3 (5V): 0.000497
CHAN B0 (3.3V): 0.000091
CHAN B1 (3.15aV): 0.000225
CHAN B2 (3.15bV): 0.000255
CHAN B3 (GND): -0.000032
OPEN: -0.000236
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:10:05.702Z,1509419405.702 [NAL9602](INFO): GPS fix at 20171031T031003: (36.802646, -121.788265)
2017-10-31T03:10:05.771Z,1509419405.771 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T03:10:05.771Z,1509419405.771 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T03:10:10.364Z,1509419410.364 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20171030T210256/Courier0124.lzma
2017-10-31T03:10:11.122Z,1509419411.122 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0124.lzma.bak
2017-10-31T03:10:11.122Z,1509419411.122 [DataOverHttps](INFO): SBD MOMSN=5177865
2017-10-31T03:10:20.344Z,1509419420.344 [DataOverHttps](INFO): Sending 554 bytes from file Logs/20171030T210256/Express0125.lzma
2017-10-31T03:10:21.090Z,1509419421.090 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0125.lzma.bak
2017-10-31T03:10:21.090Z,1509419421.090 [DataOverHttps](INFO): SBD MOMSN=5177868
2017-10-31T03:10:21.550Z,1509419421.550 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T03:10:21.550Z,1509419421.550 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T03:10:21.550Z,1509419421.550 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T03:10:27.055Z,1509419427.055 [BPC1](ERROR): Failed to receive battery data
2017-10-31T03:10:27.055Z,1509419427.055 [BPC1] Communications Fault, FailCount= 1
2017-10-31T03:10:27.055Z,1509419427.055 [BPC1](ERROR): Communications Fault
2017-10-31T03:10:27.116Z,1509419427.116 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T03:10:28.019Z,1509419428.019 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:10:28.019Z,1509419428.019 [BPC1] No Fault, FailCount= 1
2017-10-31T03:10:40.739Z,1509419440.739 [NAL9602](INFO): Powering down
2017-10-31T03:10:54.376Z,1509419454.376 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:10:54.376Z,1509419454.376 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T03:10:54.376Z,1509419454.376 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:10:54.389Z,1509419454.389 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:10:54.809Z,1509419454.809 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:10:54.809Z,1509419454.809 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T03:10:55.189Z,1509419455.189 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:10:55.190Z,1509419455.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:10:55.190Z,1509419455.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:11:28.169Z,1509419488.169 [PNI_TCM](ERROR): CRC does not match. Expected:0x693 got:0x51992
2017-10-31T03:11:31.380Z,1509419491.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x31909 got:0x1857
2017-10-31T03:11:31.825Z,1509419491.825 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:11:32.972Z,1509419492.972 [PNI_TCM](ERROR): CRC does not match. Expected:0x51407 got:0x45359
2017-10-31T03:11:34.571Z,1509419494.571 [PNI_TCM](ERROR): CRC does not match. Expected:0x38079 got:0x49328
2017-10-31T03:11:36.181Z,1509419496.181 [PNI_TCM](ERROR): CRC does not match. Expected:0x8931 got:0x49069
2017-10-31T03:11:40.972Z,1509419500.972 [PNI_TCM](ERROR): CRC does not match. Expected:0x54580 got:0x7490
2017-10-31T03:11:42.577Z,1509419502.577 [PNI_TCM](ERROR): CRC does not match. Expected:0x40133 got:0x45849
2017-10-31T03:11:42.629Z,1509419502.629 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134527
CHAN A1 (24V): -0.003420
CHAN A2 (12V): -0.001783
CHAN A3 (5V): 0.000174
CHAN B0 (3.3V): 0.000008
CHAN B1 (3.15aV): 0.000060
CHAN B2 (3.15bV): -0.000308
CHAN B3 (GND): -0.000133
OPEN: -0.000465
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:11:47.365Z,1509419507.365 [PNI_TCM](ERROR): CRC does not match. Expected:0x2388 got:0x44493
2017-10-31T03:11:47.770Z,1509419507.770 [PNI_TCM](ERROR): CRC does not match. Expected:0x47443 got:0x7490
2017-10-31T03:11:48.972Z,1509419508.972 [PNI_TCM](ERROR): CRC does not match. Expected:0x6832 got:0x45332
2017-10-31T03:11:50.574Z,1509419510.574 [PNI_TCM](ERROR): CRC does not match. Expected:0x8156 got:0x49330
2017-10-31T03:11:53.772Z,1509419513.772 [PNI_TCM](ERROR): CRC does not match. Expected:0x56721 got:0x20487
2017-10-31T03:11:55.381Z,1509419515.381 [PNI_TCM](ERROR): CRC does not match. Expected:0x32492 got:0x40416
2017-10-31T03:11:58.567Z,1509419518.567 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T03:11:58.967Z,1509419518.967 [PNI_TCM](ERROR): CRC does not match. Expected:0x32594 got:0x0
2017-10-31T03:12:01.776Z,1509419521.776 [PNI_TCM](ERROR): CRC does not match. Expected:0x27457 got:0x49071
2017-10-31T03:12:03.381Z,1509419523.381 [PNI_TCM](ERROR): CRC does not match. Expected:0x44450 got:0x18973
2017-10-31T03:12:04.979Z,1509419524.979 [PNI_TCM](ERROR): CRC does not match. Expected:0x6845 got:0x16812
2017-10-31T03:12:08.566Z,1509419528.566 [PNI_TCM](ERROR): CRC does not match. Expected:0x17734 got:0x4123
2017-10-31T03:12:12.972Z,1509419532.972 [PNI_TCM](ERROR): CRC does not match. Expected:0x47756 got:0x57045
2017-10-31T03:12:16.173Z,1509419536.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x30449 got:0x16981
2017-10-31T03:12:19.383Z,1509419539.383 [PNI_TCM](ERROR): CRC does not match. Expected:0x36483 got:0x0
2017-10-31T03:13:12.751Z,1509419592.751 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:13:16.857Z,1509419596.857 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T03:13:26.338Z,1509419606.338 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003218
CHAN A1 (24V): -0.004009
CHAN A2 (12V): -0.002182
CHAN A3 (5V): 0.000017
CHAN B0 (3.3V): 0.000703
CHAN B1 (3.15aV): -0.000179
CHAN B2 (3.15bV): -0.000388
CHAN B3 (GND): -0.000371
OPEN: -0.000341
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:13:55.501Z,1509419635.501 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:13:55.501Z,1509419635.501 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T03:13:55.501Z,1509419635.501 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:13:55.522Z,1509419635.522 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:13:55.911Z,1509419635.911 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:13:55.911Z,1509419635.911 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T03:13:56.298Z,1509419636.298 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:13:56.298Z,1509419636.298 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:13:56.299Z,1509419636.299 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:14:56.626Z,1509419696.626 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:15:05.791Z,1509419705.791 [PNI_TCM](ERROR): CRC does not match. Expected:0x47872 got:0x45501
2017-10-31T03:15:07.854Z,1509419707.854 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135113
CHAN A1 (24V): -0.003280
CHAN A2 (12V): -0.001936
CHAN A3 (5V): -0.000045
CHAN B0 (3.3V): -0.000054
CHAN B1 (3.15aV): -0.000028
CHAN B2 (3.15bV): -0.000573
CHAN B3 (GND): -0.000083
OPEN: -0.000538
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:15:21.803Z,1509419721.803 [PNI_TCM](ERROR): CRC does not match. Expected:0x25078 got:0x49328
2017-10-31T03:15:22.213Z,1509419722.213 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T03:15:22.214Z,1509419722.214 [Default:CheckIn:C.Wait] Stopped
2017-10-31T03:15:22.214Z,1509419722.214 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T03:15:22.215Z,1509419722.215 [Default:CheckIn:D] Running Loop=1
2017-10-31T03:15:22.622Z,1509419722.622 [Default:CheckIn:D] Stopped
2017-10-31T03:15:22.622Z,1509419722.622 [Default:CheckIn:E] Running Loop=1
2017-10-31T03:15:23.017Z,1509419723.017 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 278.248470 min 
2017-10-31T03:15:23.017Z,1509419723.017 [Default:CheckIn:E] Stopped
2017-10-31T03:15:23.017Z,1509419723.017 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T03:15:23.017Z,1509419723.017 [Default:CheckIn] Stopped
2017-10-31T03:15:23.017Z,1509419723.017 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T03:15:23.017Z,1509419723.017 [Default:CheckIn](INFO): Running loop #23
2017-10-31T03:15:23.018Z,1509419723.018 [Default:CheckIn] Running Loop=23
2017-10-31T03:15:23.018Z,1509419723.018 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T03:15:23.018Z,1509419723.018 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T03:15:26.355Z,1509419726.355 [NAL9602](INFO): Powering up
2017-10-31T03:15:37.509Z,1509419737.509 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:16:29.228Z,1509419789.228 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:16:29.228Z,1509419789.228 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:16:38.084Z,1509419798.084 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:16:48.897Z,1509419808.897 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003186
CHAN A1 (24V): -0.003854
CHAN A2 (12V): -0.002386
CHAN A3 (5V): 0.000242
CHAN B0 (3.3V): -0.000269
CHAN B1 (3.15aV): -0.000319
CHAN B2 (3.15bV): -0.000217
CHAN B3 (GND): 0.000188
OPEN: -0.000588
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:16:56.462Z,1509419816.462 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:16:56.462Z,1509419816.462 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T03:16:56.463Z,1509419816.463 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:16:56.476Z,1509419816.476 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:16:56.883Z,1509419816.883 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:16:56.883Z,1509419816.883 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T03:16:57.277Z,1509419817.277 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:16:57.278Z,1509419817.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:16:57.278Z,1509419817.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:18:19.267Z,1509419899.267 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:18:32.904Z,1509419912.904 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134186
CHAN A1 (24V): -0.004079
CHAN A2 (12V): -0.002186
CHAN A3 (5V): 0.000345
CHAN B0 (3.3V): -0.000334
CHAN B1 (3.15aV): -0.000076
CHAN B2 (3.15bV): -0.000302
CHAN B3 (GND): -0.000265
OPEN: -0.000406
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:18:41.236Z,1509419921.236 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T03:18:41.236Z,1509419921.236 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:18:41.236Z,1509419921.236 [BPC1](ERROR): Data Fault
2017-10-31T03:18:41.314Z,1509419921.314 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:18:42.496Z,1509419922.496 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:18:42.496Z,1509419922.496 [BPC1] No Fault, FailCount= 1
2017-10-31T03:19:57.496Z,1509419997.496 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:19:57.496Z,1509419997.496 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T03:19:57.496Z,1509419997.496 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:19:57.510Z,1509419997.510 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:19:57.903Z,1509419997.903 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:19:57.903Z,1509419997.903 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T03:19:58.268Z,1509419998.268 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:19:58.268Z,1509419998.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:19:58.268Z,1509419998.268 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:20:03.092Z,1509420003.092 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:20:13.917Z,1509420013.917 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003266
CHAN A1 (24V): -0.003609
CHAN A2 (12V): -0.001974
CHAN A3 (5V): 0.000217
CHAN B0 (3.3V): 0.000004
CHAN B1 (3.15aV): -0.000045
CHAN B2 (3.15bV): -0.000440
CHAN B3 (GND): 0.000499
OPEN: -0.000459
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:20:23.094Z,1509420023.094 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T03:15:23.0Z
2017-10-31T03:20:23.094Z,1509420023.094 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T03:20:23.094Z,1509420023.094 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T03:20:28.572Z,1509420028.572 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0128.lzma
2017-10-31T03:20:29.327Z,1509420029.327 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0128.lzma.bak
2017-10-31T03:20:29.328Z,1509420029.328 [DataOverHttps](INFO): SBD MOMSN=5177883
2017-10-31T03:20:38.789Z,1509420038.789 [DataOverHttps](INFO): Sending 545 bytes from file Logs/20171030T210256/Express0129.lzma
2017-10-31T03:20:39.571Z,1509420039.571 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0129.lzma.bak
2017-10-31T03:20:39.572Z,1509420039.572 [DataOverHttps](INFO): SBD MOMSN=5177885
2017-10-31T03:20:40.045Z,1509420040.045 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T03:20:40.045Z,1509420040.045 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T03:20:40.046Z,1509420040.046 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T03:20:40.375Z,1509420040.375 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T03:21:13.864Z,1509420073.864 [NAL9602](INFO): Powering down
2017-10-31T03:21:44.112Z,1509420104.112 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:21:54.614Z,1509420114.614 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134737
CHAN A1 (24V): -0.003508
CHAN A2 (12V): -0.002050
CHAN A3 (5V): 0.000256
CHAN B0 (3.3V): -0.000112
CHAN B1 (3.15aV): -0.000873
CHAN B2 (3.15bV): -0.000010
CHAN B3 (GND): -0.000707
OPEN: -0.000526
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:22:34.572Z,1509420154.572 [PNI_TCM](ERROR): CRC does not match. Expected:0x18279 got:0x6591
2017-10-31T03:22:36.173Z,1509420156.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x15053 got:0x1857
2017-10-31T03:22:44.254Z,1509420164.254 [PNI_TCM](ERROR): CRC does not match. Expected:0x45405 got:0x31260
2017-10-31T03:22:44.255Z,1509420164.255 [PNI_TCM](ERROR): CRC does not match. Expected:0x42380 got:0x29980
2017-10-31T03:22:44.255Z,1509420164.255 [PNI_TCM](ERROR): CRC does not match. Expected:0x42844 got:0x13084
2017-10-31T03:22:44.255Z,1509420164.255 [PNI_TCM](ERROR): CRC does not match. Expected:0x62603 got:0x52764
2017-10-31T03:22:44.256Z,1509420164.256 [PNI_TCM](ERROR): CRC does not match. Expected:0x22193 got:0x11036
2017-10-31T03:22:44.256Z,1509420164.256 [PNI_TCM](ERROR): CRC does not match. Expected:0x52855 got:0x13596
2017-10-31T03:22:44.256Z,1509420164.256 [PNI_TCM](ERROR): CRC does not match. Expected:0x8839 got:0x39452
2017-10-31T03:22:44.257Z,1509420164.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x51317 got:0x32540
2017-10-31T03:22:58.427Z,1509420178.427 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:22:58.427Z,1509420178.427 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T03:22:58.427Z,1509420178.427 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:22:58.473Z,1509420178.473 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:22:58.851Z,1509420178.851 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:22:58.851Z,1509420178.851 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T03:22:59.233Z,1509420179.233 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:22:59.233Z,1509420179.233 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:22:59.234Z,1509420179.234 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:23:17.309Z,1509420197.309 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T03:23:24.843Z,1509420204.843 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:23:35.647Z,1509420215.647 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003733
CHAN A1 (24V): -0.002930
CHAN A2 (12V): -0.002153
CHAN A3 (5V): -0.000035
CHAN B0 (3.3V): -0.000669
CHAN B1 (3.15aV): -0.000670
CHAN B2 (3.15bV): 0.000852
CHAN B3 (GND): -0.000277
OPEN: -0.000297
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:25:06.008Z,1509420306.008 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:25:16.796Z,1509420316.796 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003565
CHAN A1 (24V): -0.003886
CHAN A2 (12V): -0.002344
CHAN A3 (5V): 0.000413
CHAN B0 (3.3V): -0.000372
CHAN B1 (3.15aV): 0.000067
CHAN B2 (3.15bV): -0.000063
CHAN B3 (GND): 0.000462
OPEN: -0.000474
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:25:40.782Z,1509420340.782 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T03:25:40.782Z,1509420340.782 [Default:CheckIn:C.Wait] Stopped
2017-10-31T03:25:40.782Z,1509420340.782 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T03:25:40.783Z,1509420340.783 [Default:CheckIn:D] Running Loop=1
2017-10-31T03:25:41.191Z,1509420341.191 [Default:CheckIn:D] Stopped
2017-10-31T03:25:41.191Z,1509420341.191 [Default:CheckIn:E] Running Loop=1
2017-10-31T03:25:41.617Z,1509420341.617 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 288.557943 min 
2017-10-31T03:25:41.617Z,1509420341.617 [Default:CheckIn:E] Stopped
2017-10-31T03:25:41.618Z,1509420341.618 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T03:25:41.618Z,1509420341.618 [Default:CheckIn] Stopped
2017-10-31T03:25:41.618Z,1509420341.618 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T03:25:41.618Z,1509420341.618 [Default:CheckIn](INFO): Running loop #24
2017-10-31T03:25:41.618Z,1509420341.618 [Default:CheckIn] Running Loop=24
2017-10-31T03:25:41.618Z,1509420341.618 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T03:25:41.618Z,1509420341.618 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T03:25:44.967Z,1509420344.967 [NAL9602](INFO): Powering up
2017-10-31T03:25:56.125Z,1509420356.125 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:25:56.933Z,1509420356.933 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T03:25:56.933Z,1509420356.933 [NAL9602] Data Fault, FailCount= 1
2017-10-31T03:25:56.933Z,1509420356.933 [NAL9602](ERROR): Data Fault
2017-10-31T03:25:57.013Z,1509420357.013 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T03:25:57.329Z,1509420357.329 [NAL9602](INFO): Powering down
2017-10-31T03:25:58.199Z,1509420358.199 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T03:25:58.199Z,1509420358.199 [NAL9602] No Fault, FailCount= 1
2017-10-31T03:25:59.370Z,1509420359.370 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:25:59.370Z,1509420359.370 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T03:25:59.370Z,1509420359.370 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:25:59.394Z,1509420359.394 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:25:59.786Z,1509420359.786 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:25:59.786Z,1509420359.786 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T03:26:00.174Z,1509420360.174 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:26:00.174Z,1509420360.174 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:26:00.175Z,1509420360.175 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:26:05.757Z,1509420365.757 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:26:05.757Z,1509420365.757 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:26:05.757Z,1509420365.757 [BPC1](ERROR): Data Fault
2017-10-31T03:26:05.783Z,1509420365.783 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:26:06.992Z,1509420366.992 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:26:06.992Z,1509420366.992 [BPC1] No Fault, FailCount= 1
2017-10-31T03:26:27.725Z,1509420387.725 [NAL9602](INFO): Powering up NAL9602
2017-10-31T03:26:38.940Z,1509420398.940 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:26:47.162Z,1509420407.162 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:26:57.948Z,1509420417.948 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.001829
CHAN A1 (24V): -0.004385
CHAN A2 (12V): -0.001421
CHAN A3 (5V): 0.000127
CHAN B0 (3.3V): -0.000012
CHAN B1 (3.15aV): -0.000001
CHAN B2 (3.15bV): -0.000073
CHAN B3 (GND): 0.000026
OPEN: -0.000217
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:27:12.277Z,1509420432.277 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:27:12.277Z,1509420432.277 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:27:46.201Z,1509420466.201 [PNI_TCM](ERROR): CRC does not match. Expected:0x40575 got:0x25420
2017-10-31T03:27:56.194Z,1509420476.194 [PNI_TCM](ERROR): CRC does not match. Expected:0x38509 got:0x6335
2017-10-31T03:28:06.610Z,1509420486.610 [PNI_TCM](ERROR): CRC does not match. Expected:0x51280 got:0x10994
2017-10-31T03:28:20.193Z,1509420500.193 [PNI_TCM](ERROR): CRC does not match. Expected:0x61581 got:0x32768
2017-10-31T03:28:23.014Z,1509420503.014 [PNI_TCM](ERROR): CRC does not match. Expected:0x6176 got:0x6591
2017-10-31T03:28:28.243Z,1509420508.243 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:28:37.398Z,1509420517.398 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T03:28:39.025Z,1509420519.025 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003873
CHAN A1 (24V): -0.004210
CHAN A2 (12V): -0.002678
CHAN A3 (5V): -0.000047
CHAN B0 (3.3V): 0.000008
CHAN B1 (3.15aV): -0.000354
CHAN B2 (3.15bV): -0.000691
CHAN B3 (GND): 0.000152
OPEN: -0.000473
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:28:48.205Z,1509420528.205 [PNI_TCM](ERROR): CRC does not match. Expected:0x31725 got:0x174
2017-10-31T03:28:55.003Z,1509420535.003 [PNI_TCM](ERROR): CRC does not match. Expected:0x41819 got:0x16813
2017-10-31T03:28:59.412Z,1509420539.412 [PNI_TCM](ERROR): CRC does not match. Expected:0x45327 got:0x7490
2017-10-31T03:29:00.252Z,1509420540.252 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:29:00.252Z,1509420540.252 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T03:29:00.261Z,1509420540.261 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:29:00.298Z,1509420540.298 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:29:00.657Z,1509420540.657 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:29:00.658Z,1509420540.658 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T03:29:01.021Z,1509420541.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:29:01.021Z,1509420541.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:29:01.021Z,1509420541.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:29:11.022Z,1509420551.022 [PNI_TCM](ERROR): CRC does not match. Expected:0x6127 got:0x45319
2017-10-31T03:29:29.008Z,1509420569.008 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T03:29:29.009Z,1509420569.009 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:29:29.009Z,1509420569.009 [BPC1](ERROR): Data Fault
2017-10-31T03:29:29.072Z,1509420569.072 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:29:29.800Z,1509420569.800 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16542
2017-10-31T03:29:30.206Z,1509420570.206 [PNI_TCM](ERROR): CRC does not match. Expected:0x14293 got:0x20900
2017-10-31T03:29:30.264Z,1509420570.264 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:29:30.264Z,1509420570.264 [BPC1] No Fault, FailCount= 1
2017-10-31T03:29:31.410Z,1509420571.410 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T03:29:34.601Z,1509420574.601 [PNI_TCM](ERROR): CRC does not match. Expected:0x1995 got:0x10985
2017-10-31T03:29:35.012Z,1509420575.012 [PNI_TCM](ERROR): CRC does not match. Expected:0x31859 got:0x1857
2017-10-31T03:29:38.242Z,1509420578.242 [PNI_TCM](ERROR): CRC does not match. Expected:0x29484 got:0x44160
2017-10-31T03:29:39.400Z,1509420579.400 [PNI_TCM](ERROR): CRC does not match. Expected:0x2108 got:0x7360
2017-10-31T03:29:39.812Z,1509420579.812 [PNI_TCM](ERROR): CRC does not match. Expected:0x36592 got:0x15389
2017-10-31T03:29:59.144Z,1509420599.144 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:29:59.145Z,1509420599.145 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:30:09.203Z,1509420609.203 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:30:16.765Z,1509420616.765 [BPC1](ERROR): Failed to receive battery data
2017-10-31T03:30:16.765Z,1509420616.765 [BPC1] Communications Fault, FailCount= 1
2017-10-31T03:30:16.765Z,1509420616.765 [BPC1](ERROR): Communications Fault
2017-10-31T03:30:16.822Z,1509420616.822 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T03:30:18.018Z,1509420618.018 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:30:18.018Z,1509420618.018 [BPC1] No Fault, FailCount= 1
2017-10-31T03:30:20.018Z,1509420620.018 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004841
CHAN A1 (24V): -0.003291
CHAN A2 (12V): -0.002413
CHAN A3 (5V): 0.000486
CHAN B0 (3.3V): -0.000549
CHAN B1 (3.15aV): -0.000379
CHAN B2 (3.15bV): -0.000255
CHAN B3 (GND): -0.000244
OPEN: -0.000333
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:30:30.739Z,1509420630.739 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:30:30.739Z,1509420630.739 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:30:41.995Z,1509420641.995 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T03:25:41.6Z
2017-10-31T03:30:41.995Z,1509420641.995 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T03:30:41.995Z,1509420641.995 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T03:30:45.745Z,1509420645.745 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0132.lzma
2017-10-31T03:30:46.523Z,1509420646.523 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0132.lzma.bak
2017-10-31T03:30:46.523Z,1509420646.523 [DataOverHttps](INFO): SBD MOMSN=5177900
2017-10-31T03:30:51.140Z,1509420651.140 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:30:51.144Z,1509420651.144 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:30:56.355Z,1509420656.355 [DataOverHttps](INFO): Sending 644 bytes from file Logs/20171030T210256/Express0133.lzma
2017-10-31T03:30:57.116Z,1509420657.116 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0133.lzma.bak
2017-10-31T03:30:57.116Z,1509420657.116 [DataOverHttps](INFO): SBD MOMSN=5177902
2017-10-31T03:30:57.585Z,1509420657.585 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T03:30:57.585Z,1509420657.585 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T03:30:57.585Z,1509420657.585 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T03:31:13.859Z,1509420673.859 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:31:13.860Z,1509420673.860 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:31:38.217Z,1509420698.217 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:31:38.217Z,1509420698.217 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:31:41.414Z,1509420701.414 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T03:31:50.281Z,1509420710.281 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:32:01.712Z,1509420721.712 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:32:01.712Z,1509420721.712 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T03:32:01.712Z,1509420721.712 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:32:01.746Z,1509420721.746 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:32:01.929Z,1509420721.929 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:32:01.929Z,1509420721.929 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T03:32:02.274Z,1509420722.274 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:32:02.274Z,1509420722.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:32:02.275Z,1509420722.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:32:03.528Z,1509420723.528 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134133
CHAN A1 (24V): -0.003903
CHAN A2 (12V): -0.002179
CHAN A3 (5V): 0.000324
CHAN B0 (3.3V): 0.000085
CHAN B1 (3.15aV): -0.000457
CHAN B2 (3.15bV): -0.000061
CHAN B3 (GND): 0.000143
OPEN: -0.000370
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:32:11.838Z,1509420731.838 [NAL9602](INFO): Powering down
2017-10-31T03:33:17.658Z,1509420797.658 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T03:33:33.662Z,1509420813.662 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:33:44.446Z,1509420824.446 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004238
CHAN A1 (24V): -0.003917
CHAN A2 (12V): -0.002060
CHAN A3 (5V): 0.000310
CHAN B0 (3.3V): -0.000165
CHAN B1 (3.15aV): -0.000346
CHAN B2 (3.15bV): -0.000122
CHAN B3 (GND): -0.000024
OPEN: -0.000362
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:35:02.380Z,1509420902.380 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:35:02.380Z,1509420902.380 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T03:35:02.380Z,1509420902.380 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:35:02.394Z,1509420902.394 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:35:02.756Z,1509420902.756 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:35:02.756Z,1509420902.756 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T03:35:03.105Z,1509420903.105 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:35:03.106Z,1509420903.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:35:03.106Z,1509420903.106 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:35:14.761Z,1509420914.761 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:35:25.540Z,1509420925.540 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134578
CHAN A1 (24V): -0.004154
CHAN A2 (12V): -0.002218
CHAN A3 (5V): 0.000550
CHAN B0 (3.3V): -0.000237
CHAN B1 (3.15aV): -0.000501
CHAN B2 (3.15bV): 0.000431
CHAN B3 (GND): 0.000474
OPEN: -0.000356
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:35:30.688Z,1509420930.688 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:35:30.688Z,1509420930.688 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:35:30.688Z,1509420930.688 [BPC1](ERROR): Data Fault
2017-10-31T03:35:30.773Z,1509420930.773 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:35:31.980Z,1509420931.980 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:35:31.980Z,1509420931.980 [BPC1] No Fault, FailCount= 1
2017-10-31T03:35:58.308Z,1509420958.308 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T03:35:58.309Z,1509420958.309 [Default:CheckIn:C.Wait] Stopped
2017-10-31T03:35:58.309Z,1509420958.309 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T03:35:58.309Z,1509420958.309 [Default:CheckIn:D] Running Loop=1
2017-10-31T03:35:58.710Z,1509420958.710 [Default:CheckIn:D] Stopped
2017-10-31T03:35:58.710Z,1509420958.710 [Default:CheckIn:E] Running Loop=1
2017-10-31T03:35:59.110Z,1509420959.110 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 298.849935 min 
2017-10-31T03:35:59.110Z,1509420959.110 [Default:CheckIn:E] Stopped
2017-10-31T03:35:59.110Z,1509420959.110 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T03:35:59.111Z,1509420959.111 [Default:CheckIn] Stopped
2017-10-31T03:35:59.111Z,1509420959.111 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T03:35:59.111Z,1509420959.111 [Default:CheckIn](INFO): Running loop #25
2017-10-31T03:35:59.111Z,1509420959.111 [Default:CheckIn] Running Loop=25
2017-10-31T03:35:59.111Z,1509420959.111 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T03:35:59.111Z,1509420959.111 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T03:36:02.446Z,1509420962.446 [NAL9602](INFO): Powering up
2017-10-31T03:36:13.595Z,1509420973.595 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:36:45.598Z,1509421005.598 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T03:36:45.680Z,1509421005.680 [NAL9602](FAULT): received: 
+SBDI: 2, 3313, 2, 0, 0, 0

OK
2017-10-31T03:36:45.681Z,1509421005.681 [NAL9602] Data Fault, FailCount= 2
2017-10-31T03:36:45.681Z,1509421005.681 [NAL9602](ERROR): Data Fault
2017-10-31T03:36:45.757Z,1509421005.757 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T03:36:45.994Z,1509421005.994 [NAL9602](INFO): Powering down
2017-10-31T03:36:46.852Z,1509421006.852 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T03:36:46.852Z,1509421006.852 [NAL9602] No Fault, FailCount= 2
2017-10-31T03:36:55.679Z,1509421015.679 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:37:09.524Z,1509421029.524 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002950
CHAN A1 (24V): -0.003891
CHAN A2 (12V): -0.002357
CHAN A3 (5V): 0.000324
CHAN B0 (3.3V): 0.000032
CHAN B1 (3.15aV): 0.000004
CHAN B2 (3.15bV): -0.000226
CHAN B3 (GND): -0.000750
OPEN: -0.000312
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:37:16.238Z,1509421036.238 [NAL9602](INFO): Powering up NAL9602
2017-10-31T03:37:27.438Z,1509421047.438 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:37:28.239Z,1509421048.239 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T03:37:28.239Z,1509421048.239 [NAL9602] Data Fault, FailCount= 3
2017-10-31T03:37:28.239Z,1509421048.239 [NAL9602](ERROR): Data Fault
2017-10-31T03:37:28.307Z,1509421048.307 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T03:37:28.643Z,1509421048.643 [NAL9602](INFO): Powering down
2017-10-31T03:37:29.500Z,1509421049.500 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T03:37:29.500Z,1509421049.500 [NAL9602] No Fault, FailCount= 3
2017-10-31T03:37:59.034Z,1509421079.034 [NAL9602](INFO): Powering up NAL9602
2017-10-31T03:38:03.369Z,1509421083.369 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:38:03.369Z,1509421083.369 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T03:38:03.369Z,1509421083.369 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:38:03.382Z,1509421083.382 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:38:03.820Z,1509421083.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:38:03.820Z,1509421083.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T03:38:04.167Z,1509421084.167 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:38:04.168Z,1509421084.168 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:38:04.168Z,1509421084.168 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:38:10.124Z,1509421090.124 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:38:29.385Z,1509421109.385 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:38:29.385Z,1509421109.385 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:38:29.385Z,1509421109.385 [BPC1](ERROR): Data Fault
2017-10-31T03:38:29.445Z,1509421109.445 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:38:30.601Z,1509421110.601 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:38:30.601Z,1509421110.601 [BPC1] No Fault, FailCount= 1
2017-10-31T03:38:39.813Z,1509421119.813 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:38:50.597Z,1509421130.597 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003554
CHAN A1 (24V): 4.657929
CHAN A2 (12V): -0.002560
CHAN A3 (5V): 0.000027
CHAN B0 (3.3V): 0.000213
CHAN B1 (3.15aV): -0.000555
CHAN B2 (3.15bV): -0.000229
CHAN B3 (GND): -0.000257
OPEN: -0.000341
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:39:52.098Z,1509421192.098 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:39:52.098Z,1509421192.098 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:40:03.899Z,1509421203.899 [BPC1](ERROR): Failed to receive battery data
2017-10-31T03:40:03.899Z,1509421203.899 [BPC1] Communications Fault, FailCount= 1
2017-10-31T03:40:03.899Z,1509421203.899 [BPC1](ERROR): Communications Fault
2017-10-31T03:40:03.923Z,1509421203.923 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T03:40:05.116Z,1509421205.116 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:40:05.116Z,1509421205.116 [BPC1] No Fault, FailCount= 1
2017-10-31T03:40:20.715Z,1509421220.715 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:40:31.911Z,1509421231.911 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002311
CHAN A1 (24V): -0.004223
CHAN A2 (12V): -0.002057
CHAN A3 (5V): 0.000656
CHAN B0 (3.3V): 0.000096
CHAN B1 (3.15aV): -0.000366
CHAN B2 (3.15bV): -0.000222
CHAN B3 (GND): 0.000232
OPEN: -0.000473
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:40:52.654Z,1509421252.654 [NAL9602](INFO): SBD MO Status=2, MOMSN=3313, MT Status=2, MTMSN=0
2017-10-31T03:40:52.654Z,1509421252.654 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:40:59.501Z,1509421259.501 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T03:35:59.1Z
2017-10-31T03:40:59.501Z,1509421259.501 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T03:40:59.502Z,1509421259.502 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T03:41:03.649Z,1509421263.649 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0136.lzma
2017-10-31T03:41:04.412Z,1509421264.412 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0136.lzma.bak
2017-10-31T03:41:04.412Z,1509421264.412 [DataOverHttps](INFO): SBD MOMSN=5177919
2017-10-31T03:41:04.498Z,1509421264.498 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:41:04.498Z,1509421264.498 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T03:41:04.498Z,1509421264.498 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:41:04.519Z,1509421264.519 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:41:04.887Z,1509421264.887 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:41:04.887Z,1509421264.887 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T03:41:05.271Z,1509421265.271 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:41:05.272Z,1509421265.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:41:05.272Z,1509421265.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:41:13.870Z,1509421273.870 [DataOverHttps](INFO): Sending 679 bytes from file Logs/20171030T210256/Express0137.lzma
2017-10-31T03:41:14.612Z,1509421274.612 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0137.lzma.bak
2017-10-31T03:41:14.613Z,1509421274.613 [DataOverHttps](INFO): SBD MOMSN=5177921
2017-10-31T03:41:15.082Z,1509421275.082 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T03:41:15.082Z,1509421275.082 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T03:41:15.082Z,1509421275.082 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T03:41:31.235Z,1509421291.235 [NAL9602](INFO): SBD MO Status=0, MOMSN=3313, MT Status=0, MTMSN=0
2017-10-31T03:41:31.235Z,1509421291.235 [NAL9602](INFO): No messages in MT queue
2017-10-31T03:42:02.038Z,1509421322.038 [NAL9602](INFO): Powering down
2017-10-31T03:42:02.124Z,1509421322.124 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:42:12.897Z,1509421332.897 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135216
CHAN A1 (24V): -0.003518
CHAN A2 (12V): -0.002616
CHAN A3 (5V): 0.000047
CHAN B0 (3.3V): -0.000340
CHAN B1 (3.15aV): 0.000286
CHAN B2 (3.15bV): -0.000461
CHAN B3 (GND): 0.000121
OPEN: -0.000435
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:43:19.011Z,1509421399.011 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T03:43:24.265Z,1509421404.265 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T03:43:24.265Z,1509421404.265 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:43:24.265Z,1509421404.265 [BPC1](ERROR): Data Fault
2017-10-31T03:43:24.321Z,1509421404.321 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:43:25.515Z,1509421405.515 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:43:25.515Z,1509421405.515 [BPC1] No Fault, FailCount= 1
2017-10-31T03:43:43.093Z,1509421423.093 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:43:53.915Z,1509421433.915 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003422
CHAN A1 (24V): -0.003530
CHAN A2 (12V): -0.002218
CHAN A3 (5V): 0.000445
CHAN B0 (3.3V): -0.000155
CHAN B1 (3.15aV): -0.000205
CHAN B2 (3.15bV): 0.000078
CHAN B3 (GND): -0.000160
OPEN: -0.000380
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:44:05.493Z,1509421445.493 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:44:05.493Z,1509421445.493 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T03:44:05.493Z,1509421445.493 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:44:05.515Z,1509421445.515 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:44:05.900Z,1509421445.900 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:44:05.900Z,1509421445.900 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T03:44:06.286Z,1509421446.286 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:44:06.287Z,1509421446.287 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:44:06.287Z,1509421446.287 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:45:23.933Z,1509421523.933 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:45:34.717Z,1509421534.717 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134469
CHAN A1 (24V): -0.003706
CHAN A2 (12V): -0.002427
CHAN A3 (5V): 0.000513
CHAN B0 (3.3V): -0.000083
CHAN B1 (3.15aV): -0.000467
CHAN B2 (3.15bV): 0.000069
CHAN B3 (GND): -0.000616
OPEN: -0.000716
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:45:39.474Z,1509421539.474 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:45:39.474Z,1509421539.474 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:45:39.474Z,1509421539.474 [BPC1](ERROR): Data Fault
2017-10-31T03:45:39.538Z,1509421539.538 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:45:40.723Z,1509421540.723 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:45:40.723Z,1509421540.723 [BPC1] No Fault, FailCount= 1
2017-10-31T03:46:15.495Z,1509421575.495 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T03:46:15.495Z,1509421575.495 [Default:CheckIn:C.Wait] Stopped
2017-10-31T03:46:15.496Z,1509421575.496 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T03:46:15.496Z,1509421575.496 [Default:CheckIn:D] Running Loop=1
2017-10-31T03:46:15.897Z,1509421575.897 [Default:CheckIn:D] Stopped
2017-10-31T03:46:15.897Z,1509421575.897 [Default:CheckIn:E] Running Loop=1
2017-10-31T03:46:16.311Z,1509421576.311 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 309.136393 min 
2017-10-31T03:46:16.311Z,1509421576.311 [Default:CheckIn:E] Stopped
2017-10-31T03:46:16.311Z,1509421576.311 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T03:46:16.311Z,1509421576.311 [Default:CheckIn] Stopped
2017-10-31T03:46:16.312Z,1509421576.312 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T03:46:16.312Z,1509421576.312 [Default:CheckIn](INFO): Running loop #26
2017-10-31T03:46:16.312Z,1509421576.312 [Default:CheckIn] Running Loop=26
2017-10-31T03:46:16.312Z,1509421576.312 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T03:46:16.312Z,1509421576.312 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T03:46:19.758Z,1509421579.758 [NAL9602](INFO): Powering up
2017-10-31T03:46:30.887Z,1509421590.887 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:46:45.312Z,1509421605.312 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:46:45.313Z,1509421605.313 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:46:45.313Z,1509421605.313 [BPC1](ERROR): Data Fault
2017-10-31T03:46:45.382Z,1509421605.382 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:46:46.552Z,1509421606.552 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:46:46.552Z,1509421606.552 [BPC1] No Fault, FailCount= 1
2017-10-31T03:47:04.957Z,1509421624.957 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:47:06.533Z,1509421626.533 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:47:06.534Z,1509421626.534 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T03:47:06.534Z,1509421626.534 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:47:06.563Z,1509421626.563 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:47:06.964Z,1509421626.964 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:47:06.964Z,1509421626.964 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T03:47:07.407Z,1509421627.407 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:47:07.407Z,1509421627.407 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:47:07.408Z,1509421627.408 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:47:15.760Z,1509421635.760 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003083
CHAN A1 (24V): -0.003986
CHAN A2 (12V): -0.002026
CHAN A3 (5V): 0.000616
CHAN B0 (3.3V): 0.000088
CHAN B1 (3.15aV): -0.000831
CHAN B2 (3.15bV): -0.000581
CHAN B3 (GND): 0.000023
OPEN: -0.000062
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:48:45.852Z,1509421725.852 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:48:56.669Z,1509421736.669 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134204
CHAN A1 (24V): -0.004065
CHAN A2 (12V): -0.002415
CHAN A3 (5V): 0.000211
CHAN B0 (3.3V): 0.000556
CHAN B1 (3.15aV): 0.000431
CHAN B2 (3.15bV): 0.000175
CHAN B3 (GND): 0.000176
OPEN: -0.000430
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:50:07.765Z,1509421807.765 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:50:07.765Z,1509421807.765 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T03:50:07.765Z,1509421807.765 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:50:07.782Z,1509421807.782 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:50:08.184Z,1509421808.184 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:50:08.184Z,1509421808.184 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T03:50:08.558Z,1509421808.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:50:08.562Z,1509421808.562 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:50:08.563Z,1509421808.563 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:50:26.784Z,1509421826.784 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:50:37.553Z,1509421837.553 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134160
CHAN A1 (24V): -0.004268
CHAN A2 (12V): -0.002151
CHAN A3 (5V): 0.000383
CHAN B0 (3.3V): 0.000269
CHAN B1 (3.15aV): -0.000086
CHAN B2 (3.15bV): 0.000277
CHAN B3 (GND): 0.000277
OPEN: -0.000545
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:50:48.259Z,1509421848.259 [NAL9602](INFO): SBD MO Status=0, MOMSN=3314, MT Status=0, MTMSN=0
2017-10-31T03:50:48.260Z,1509421848.260 [NAL9602](INFO): No messages in MT queue
2017-10-31T03:50:49.064Z,1509421849.064 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T03:50:49.064Z,1509421849.064 [NAL9602] Data Fault, FailCount= 1
2017-10-31T03:50:49.064Z,1509421849.064 [NAL9602](ERROR): Data Fault
2017-10-31T03:50:49.175Z,1509421849.175 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T03:50:49.460Z,1509421849.460 [NAL9602](INFO): Powering down
2017-10-31T03:50:50.333Z,1509421850.333 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T03:50:50.333Z,1509421850.333 [NAL9602] No Fault, FailCount= 1
2017-10-31T03:51:16.704Z,1509421876.704 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T03:46:16.3Z
2017-10-31T03:51:16.704Z,1509421876.704 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T03:51:16.704Z,1509421876.704 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T03:51:20.753Z,1509421880.753 [NAL9602](INFO): Powering up NAL9602
2017-10-31T03:51:20.925Z,1509421880.925 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0140.lzma
2017-10-31T03:51:21.676Z,1509421881.676 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0140.lzma.bak
2017-10-31T03:51:21.676Z,1509421881.676 [DataOverHttps](INFO): SBD MOMSN=5177940
2017-10-31T03:51:26.653Z,1509421886.653 [PNI_TCM](ERROR): CRC does not match. Expected:0x60753 got:0x16812
2017-10-31T03:51:30.888Z,1509421890.888 [DataOverHttps](INFO): Sending 603 bytes from file Logs/20171030T210256/Express0141.lzma
2017-10-31T03:51:31.241Z,1509421891.241 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:51:31.636Z,1509421891.636 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0141.lzma.bak
2017-10-31T03:51:31.636Z,1509421891.636 [DataOverHttps](INFO): SBD MOMSN=5177942
2017-10-31T03:51:32.119Z,1509421892.119 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T03:51:32.119Z,1509421892.119 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T03:51:32.119Z,1509421892.119 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T03:52:02.252Z,1509421922.252 [NAL9602](INFO): Powering down
2017-10-31T03:52:07.956Z,1509421927.956 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:52:18.729Z,1509421938.729 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003904
CHAN A1 (24V): -0.003244
CHAN A2 (12V): -0.002070
CHAN A3 (5V): 0.000026
CHAN B0 (3.3V): -0.000137
CHAN B1 (3.15aV): -0.000602
CHAN B2 (3.15bV): -0.000201
CHAN B3 (GND): 0.000220
OPEN: -0.000333
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:53:08.610Z,1509421988.610 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:53:08.610Z,1509421988.610 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T03:53:08.610Z,1509421988.610 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:53:08.644Z,1509421988.644 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:53:08.986Z,1509421988.986 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:53:08.986Z,1509421988.986 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T03:53:09.375Z,1509421989.375 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:53:09.376Z,1509421989.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:53:09.376Z,1509421989.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:53:19.407Z,1509421999.407 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T03:53:48.824Z,1509422028.824 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:53:59.582Z,1509422039.582 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134086
CHAN A1 (24V): -0.003742
CHAN A2 (12V): -0.002410
CHAN A3 (5V): 0.000148
CHAN B0 (3.3V): 0.000146
CHAN B1 (3.15aV): 0.000408
CHAN B2 (3.15bV): -0.000625
CHAN B3 (GND): -0.000324
OPEN: -0.000636
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:55:20.484Z,1509422120.484 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T03:55:20.484Z,1509422120.484 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:55:20.484Z,1509422120.484 [BPC1](ERROR): Data Fault
2017-10-31T03:55:20.537Z,1509422120.537 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:55:21.729Z,1509422121.729 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:55:21.729Z,1509422121.729 [BPC1] No Fault, FailCount= 1
2017-10-31T03:55:29.734Z,1509422129.734 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:55:43.746Z,1509422143.746 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003277
CHAN A1 (24V): -0.003777
CHAN A2 (12V): -0.002167
CHAN A3 (5V): 0.000135
CHAN B0 (3.3V): -0.000242
CHAN B1 (3.15aV): -0.000008
CHAN B2 (3.15bV): 0.000216
CHAN B3 (GND): -0.000188
OPEN: -0.000559
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:56:09.694Z,1509422169.694 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:56:09.694Z,1509422169.694 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T03:56:09.694Z,1509422169.694 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:56:09.708Z,1509422169.708 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:56:10.111Z,1509422170.111 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:56:10.111Z,1509422170.111 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T03:56:10.496Z,1509422170.496 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:56:10.497Z,1509422170.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:56:10.497Z,1509422170.497 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:56:32.487Z,1509422192.487 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T03:56:32.487Z,1509422192.487 [Default:CheckIn:C.Wait] Stopped
2017-10-31T03:56:32.487Z,1509422192.487 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T03:56:32.488Z,1509422192.488 [Default:CheckIn:D] Running Loop=1
2017-10-31T03:56:32.884Z,1509422192.884 [Default:CheckIn:D] Stopped
2017-10-31T03:56:32.884Z,1509422192.884 [Default:CheckIn:E] Running Loop=1
2017-10-31T03:56:33.285Z,1509422193.285 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 319.419499 min 
2017-10-31T03:56:33.285Z,1509422193.285 [Default:CheckIn:E] Stopped
2017-10-31T03:56:33.285Z,1509422193.285 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T03:56:33.286Z,1509422193.286 [Default:CheckIn] Stopped
2017-10-31T03:56:33.286Z,1509422193.286 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T03:56:33.286Z,1509422193.286 [Default:CheckIn](INFO): Running loop #27
2017-10-31T03:56:33.286Z,1509422193.286 [Default:CheckIn] Running Loop=27
2017-10-31T03:56:33.286Z,1509422193.286 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T03:56:33.286Z,1509422193.286 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T03:56:37.097Z,1509422197.097 [NAL9602](INFO): Powering up
2017-10-31T03:56:47.975Z,1509422207.975 [NAL9602](INFO): NAL9602 initialized
2017-10-31T03:57:05.190Z,1509422225.190 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T03:57:05.190Z,1509422225.190 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:57:14.076Z,1509422234.076 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:57:24.858Z,1509422244.858 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134325
CHAN A1 (24V): -0.004741
CHAN A2 (12V): -0.002291
CHAN A3 (5V): -0.000005
CHAN B0 (3.3V): -0.000355
CHAN B1 (3.15aV): -0.000710
CHAN B2 (3.15bV): -0.000488
CHAN B3 (GND): -0.000374
OPEN: -0.000347
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:57:29.585Z,1509422249.585 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T03:57:29.585Z,1509422249.585 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:58:12.177Z,1509422292.177 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T03:58:12.178Z,1509422292.178 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T03:58:54.911Z,1509422334.911 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T03:59:05.712Z,1509422345.712 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002940
CHAN A1 (24V): -0.003686
CHAN A2 (12V): -0.002067
CHAN A3 (5V): 0.000221
CHAN B0 (3.3V): 0.000302
CHAN B1 (3.15aV): -0.000717
CHAN B2 (3.15bV): 0.000034
CHAN B3 (GND): -0.000122
OPEN: -0.000201
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T03:59:10.877Z,1509422350.877 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T03:59:10.877Z,1509422350.877 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T03:59:10.877Z,1509422350.877 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T03:59:10.890Z,1509422350.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T03:59:11.292Z,1509422351.292 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T03:59:11.293Z,1509422351.293 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T03:59:11.673Z,1509422351.673 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T03:59:11.673Z,1509422351.673 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T03:59:11.674Z,1509422351.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T03:59:49.275Z,1509422389.275 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T03:59:49.275Z,1509422389.275 [BPC1] Data Fault, FailCount= 1
2017-10-31T03:59:49.275Z,1509422389.275 [BPC1](ERROR): Data Fault
2017-10-31T03:59:49.318Z,1509422389.318 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T03:59:50.498Z,1509422390.498 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T03:59:50.498Z,1509422390.498 [BPC1] No Fault, FailCount= 1
2017-10-31T04:00:38.171Z,1509422438.171 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:00:48.657Z,1509422448.657 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133683
CHAN A1 (24V): -0.004219
CHAN A2 (12V): -0.002073
CHAN A3 (5V): 0.000023
CHAN B0 (3.3V): -0.000142
CHAN B1 (3.15aV): -0.000202
CHAN B2 (3.15bV): -0.000223
CHAN B3 (GND): -0.000048
OPEN: -0.000565
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:01:10.191Z,1509422470.191 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:01:10.191Z,1509422470.191 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:01:33.462Z,1509422493.462 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T03:56:33.3Z
2017-10-31T04:01:33.462Z,1509422493.462 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T04:01:33.462Z,1509422493.462 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T04:01:38.125Z,1509422498.125 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0144.lzma
2017-10-31T04:01:38.884Z,1509422498.884 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0144.lzma.bak
2017-10-31T04:01:38.884Z,1509422498.884 [DataOverHttps](INFO): SBD MOMSN=5177959
2017-10-31T04:01:48.306Z,1509422508.306 [DataOverHttps](INFO): Sending 553 bytes from file Logs/20171030T210256/Express0145.lzma
2017-10-31T04:01:49.077Z,1509422509.077 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0145.lzma.bak
2017-10-31T04:01:49.077Z,1509422509.077 [DataOverHttps](INFO): SBD MOMSN=5177961
2017-10-31T04:01:49.505Z,1509422509.505 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:01:49.505Z,1509422509.505 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:01:49.566Z,1509422509.566 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T04:01:49.566Z,1509422509.566 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T04:01:49.570Z,1509422509.570 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T04:01:53.260Z,1509422513.260 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T04:02:11.815Z,1509422531.815 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:02:11.816Z,1509422531.816 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T04:02:11.816Z,1509422531.816 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:02:11.852Z,1509422531.852 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:02:12.223Z,1509422532.223 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:02:12.224Z,1509422532.224 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T04:02:12.623Z,1509422532.623 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:02:12.623Z,1509422532.623 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:02:12.624Z,1509422532.624 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:02:19.070Z,1509422539.070 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:02:23.770Z,1509422543.770 [NAL9602](INFO): Powering down
2017-10-31T04:02:29.837Z,1509422549.837 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003202
CHAN A1 (24V): -0.003544
CHAN A2 (12V): -0.002138
CHAN A3 (5V): 0.000636
CHAN B0 (3.3V): 0.000235
CHAN B1 (3.15aV): -0.000364
CHAN B2 (3.15bV): -0.000446
CHAN B3 (GND): -0.000189
OPEN: -0.000529
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:02:55.477Z,1509422575.477 [PNI_TCM](ERROR): CRC does not match. Expected:0x43 got:0x49328
2017-10-31T04:03:19.505Z,1509422599.505 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T04:04:00.079Z,1509422640.079 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:04:10.924Z,1509422650.924 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134353
CHAN A1 (24V): -0.003520
CHAN A2 (12V): -0.002160
CHAN A3 (5V): -0.000130
CHAN B0 (3.3V): 0.000246
CHAN B1 (3.15aV): 0.000090
CHAN B2 (3.15bV): -0.000944
CHAN B3 (GND): -0.000051
OPEN: -0.000471
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:04:45.275Z,1509422685.275 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T04:04:45.275Z,1509422685.275 [BPC1] Data Fault, FailCount= 1
2017-10-31T04:04:45.275Z,1509422685.275 [BPC1](ERROR): Data Fault
2017-10-31T04:04:45.319Z,1509422685.319 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T04:04:46.472Z,1509422686.472 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:04:46.472Z,1509422686.472 [BPC1] No Fault, FailCount= 1
2017-10-31T04:05:12.738Z,1509422712.738 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:05:12.738Z,1509422712.738 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T04:05:12.738Z,1509422712.738 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:05:12.776Z,1509422712.776 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:05:13.153Z,1509422713.153 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:05:13.153Z,1509422713.153 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T04:05:13.548Z,1509422713.548 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:05:13.548Z,1509422713.548 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:05:13.548Z,1509422713.548 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:05:41.160Z,1509422741.160 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:05:54.464Z,1509422754.464 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003010
CHAN A1 (24V): -0.004009
CHAN A2 (12V): -0.002268
CHAN A3 (5V): -0.000118
CHAN B0 (3.3V): -0.000093
CHAN B1 (3.15aV): -0.000199
CHAN B2 (3.15bV): -0.000414
CHAN B3 (GND): 0.000115
OPEN: -0.000488
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:06:50.040Z,1509422810.040 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T04:06:50.041Z,1509422810.041 [Default:CheckIn:C.Wait] Stopped
2017-10-31T04:06:50.041Z,1509422810.041 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T04:06:50.041Z,1509422810.041 [Default:CheckIn:D] Running Loop=1
2017-10-31T04:06:50.448Z,1509422810.448 [Default:CheckIn:D] Stopped
2017-10-31T04:06:50.448Z,1509422810.448 [Default:CheckIn:E] Running Loop=1
2017-10-31T04:06:50.840Z,1509422810.840 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 329.712240 min 
2017-10-31T04:06:50.840Z,1509422810.840 [Default:CheckIn:E] Stopped
2017-10-31T04:06:50.840Z,1509422810.840 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T04:06:50.840Z,1509422810.840 [Default:CheckIn] Stopped
2017-10-31T04:06:50.840Z,1509422810.840 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T04:06:50.841Z,1509422810.841 [Default:CheckIn](INFO): Running loop #28
2017-10-31T04:06:50.841Z,1509422810.841 [Default:CheckIn] Running Loop=28
2017-10-31T04:06:50.841Z,1509422810.841 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T04:06:50.841Z,1509422810.841 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T04:06:54.182Z,1509422814.182 [NAL9602](INFO): Powering up
2017-10-31T04:07:03.801Z,1509422823.801 [BPC1](ERROR): Failed to receive battery data
2017-10-31T04:07:03.801Z,1509422823.801 [BPC1] Communications Fault, FailCount= 1
2017-10-31T04:07:03.801Z,1509422823.801 [BPC1](ERROR): Communications Fault
2017-10-31T04:07:03.856Z,1509422823.856 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T04:07:05.043Z,1509422825.043 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:07:05.043Z,1509422825.043 [BPC1] No Fault, FailCount= 1
2017-10-31T04:07:05.375Z,1509422825.375 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:07:06.185Z,1509422826.185 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T04:07:06.185Z,1509422826.185 [NAL9602] Data Fault, FailCount= 1
2017-10-31T04:07:06.185Z,1509422826.185 [NAL9602](ERROR): Data Fault
2017-10-31T04:07:06.285Z,1509422826.285 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T04:07:06.577Z,1509422826.577 [NAL9602](INFO): Powering down
2017-10-31T04:07:07.442Z,1509422827.442 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T04:07:07.442Z,1509422827.442 [NAL9602] No Fault, FailCount= 1
2017-10-31T04:07:24.680Z,1509422844.680 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:07:35.464Z,1509422855.464 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134953
CHAN A1 (24V): -0.003121
CHAN A2 (12V): -0.002123
CHAN A3 (5V): 0.000374
CHAN B0 (3.3V): 0.000041
CHAN B1 (3.15aV): -0.000189
CHAN B2 (3.15bV): -0.000361
CHAN B3 (GND): 0.000394
OPEN: -0.000464
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:07:36.981Z,1509422856.981 [NAL9602](INFO): Powering up NAL9602
2017-10-31T04:07:48.181Z,1509422868.181 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:08:13.586Z,1509422893.586 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:08:13.586Z,1509422893.586 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T04:08:13.586Z,1509422893.586 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:08:13.607Z,1509422893.607 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:08:13.608Z,1509422893.608 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:08:25.932Z,1509422905.932 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:08:25.932Z,1509422905.932 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:09:01.086Z,1509422941.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x28681 got:0x49069
2017-10-31T04:09:02.688Z,1509422942.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x18725 got:0x20231
2017-10-31T04:09:05.529Z,1509422945.529 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:09:07.493Z,1509422947.493 [PNI_TCM](ERROR): CRC does not match. Expected:0x30848 got:0x6591
2017-10-31T04:09:13.888Z,1509422953.888 [PNI_TCM](ERROR): CRC does not match. Expected:0x4981 got:0x16384
2017-10-31T04:09:15.487Z,1509422955.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x10187 got:0x45256
2017-10-31T04:09:16.392Z,1509422956.392 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003151
CHAN A1 (24V): -0.003626
CHAN A2 (12V): -0.002656
CHAN A3 (5V): 0.000051
CHAN B0 (3.3V): -0.000311
CHAN B1 (3.15aV): -0.000020
CHAN B2 (3.15bV): -0.000043
CHAN B3 (GND): -0.000151
OPEN: -0.000380
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:09:17.086Z,1509422957.086 [PNI_TCM](ERROR): CRC does not match. Expected:0x58450 got:0x63004
2017-10-31T04:09:18.685Z,1509422958.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x16175 got:0x21001
2017-10-31T04:09:29.891Z,1509422969.891 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T04:09:34.648Z,1509422974.648 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:09:34.649Z,1509422974.649 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:09:41.895Z,1509422981.895 [BPC1](ERROR): Failed to receive battery data
2017-10-31T04:09:41.895Z,1509422981.895 [BPC1] Communications Fault, FailCount= 1
2017-10-31T04:09:41.895Z,1509422981.895 [BPC1](ERROR): Communications Fault
2017-10-31T04:09:41.916Z,1509422981.916 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T04:09:42.691Z,1509422982.691 [PNI_TCM](ERROR): CRC does not match. Expected:0x45598 got:0x6978
2017-10-31T04:09:43.164Z,1509422983.164 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:09:43.164Z,1509422983.164 [BPC1] No Fault, FailCount= 1
2017-10-31T04:09:44.301Z,1509422984.301 [PNI_TCM](ERROR): CRC does not match. Expected:0x13273 got:0x32027
2017-10-31T04:09:49.094Z,1509422989.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x5126 got:0x1857
2017-10-31T04:10:03.234Z,1509423003.234 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:10:03.234Z,1509423003.234 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:10:46.503Z,1509423046.503 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:11:00.250Z,1509423060.250 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003357
CHAN A1 (24V): -0.004045
CHAN A2 (12V): -0.002712
CHAN A3 (5V): 0.000032
CHAN B0 (3.3V): -0.000021
CHAN B1 (3.15aV): 4.767929
CHAN B2 (3.15bV): -0.000455
CHAN B3 (GND): 0.000076
OPEN: -0.000486
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:11:06.566Z,1509423066.566 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:11:06.566Z,1509423066.566 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:11:31.812Z,1509423091.812 [BPC1](ERROR): Failed to parse message.
2017-10-31T04:11:31.812Z,1509423091.812 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T04:11:31.813Z,1509423091.813 [BPC1] Data Fault, FailCount= 1
2017-10-31T04:11:31.813Z,1509423091.813 [BPC1](ERROR): Data Fault
2017-10-31T04:11:31.870Z,1509423091.870 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T04:11:33.022Z,1509423093.022 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:11:33.022Z,1509423093.022 [BPC1] No Fault, FailCount= 1
2017-10-31T04:11:51.028Z,1509423111.028 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T04:06:50.8Z
2017-10-31T04:11:51.028Z,1509423111.028 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T04:11:51.028Z,1509423111.028 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T04:11:55.310Z,1509423115.310 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0148.lzma
2017-10-31T04:11:56.076Z,1509423116.076 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0148.lzma.bak
2017-10-31T04:11:56.076Z,1509423116.076 [DataOverHttps](INFO): SBD MOMSN=5177976
2017-10-31T04:12:01.891Z,1509423121.891 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T04:12:05.435Z,1509423125.435 [DataOverHttps](INFO): Sending 697 bytes from file Logs/20171030T210256/Express0149.lzma
2017-10-31T04:12:06.175Z,1509423126.175 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0149.lzma.bak
2017-10-31T04:12:06.175Z,1509423126.175 [DataOverHttps](INFO): SBD MOMSN=5177978
2017-10-31T04:12:06.649Z,1509423126.649 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T04:12:06.649Z,1509423126.649 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T04:12:06.649Z,1509423126.649 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T04:12:30.552Z,1509423150.552 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:12:41.349Z,1509423161.349 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134118
CHAN A1 (24V): -0.004456
CHAN A2 (12V): -0.002904
CHAN A3 (5V): -0.000061
CHAN B0 (3.3V): 0.000044
CHAN B1 (3.15aV): -0.000610
CHAN B2 (3.15bV): -0.000169
CHAN B3 (GND): 0.000471
OPEN: -0.000454
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:12:50.886Z,1509423170.886 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T04:13:19.702Z,1509423199.702 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T04:13:21.606Z,1509423201.606 [NAL9602](INFO): Powering down
2017-10-31T04:14:11.402Z,1509423251.402 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:14:22.190Z,1509423262.190 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003091
CHAN A1 (24V): -0.004062
CHAN A2 (12V): -0.002244
CHAN A3 (5V): 0.000336
CHAN B0 (3.3V): 0.000081
CHAN B1 (3.15aV): -0.000246
CHAN B2 (3.15bV): -0.000036
CHAN B3 (GND): 0.000085
OPEN: -0.000448
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:14:59.764Z,1509423299.764 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T04:14:59.764Z,1509423299.764 [BPC1] Data Fault, FailCount= 1
2017-10-31T04:14:59.764Z,1509423299.764 [BPC1](ERROR): Data Fault
2017-10-31T04:14:59.816Z,1509423299.816 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T04:15:00.994Z,1509423300.994 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:15:00.994Z,1509423300.994 [BPC1] No Fault, FailCount= 1
2017-10-31T04:15:52.368Z,1509423352.368 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:16:03.172Z,1509423363.172 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134942
CHAN A1 (24V): -0.003083
CHAN A2 (12V): -0.002151
CHAN A3 (5V): 0.000221
CHAN B0 (3.3V): 0.000194
CHAN B1 (3.15aV): -0.000690
CHAN B2 (3.15bV): -0.000272
CHAN B3 (GND): -0.000225
OPEN: -0.000727
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:17:07.386Z,1509423427.386 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T04:17:07.386Z,1509423427.386 [Default:CheckIn:C.Wait] Stopped
2017-10-31T04:17:07.386Z,1509423427.386 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T04:17:07.386Z,1509423427.386 [Default:CheckIn:D] Running Loop=1
2017-10-31T04:17:07.779Z,1509423427.779 [Default:CheckIn:D] Stopped
2017-10-31T04:17:07.779Z,1509423427.779 [Default:CheckIn:E] Running Loop=1
2017-10-31T04:17:08.181Z,1509423428.181 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 340.001074 min 
2017-10-31T04:17:08.181Z,1509423428.181 [Default:CheckIn:E] Stopped
2017-10-31T04:17:08.181Z,1509423428.181 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T04:17:08.181Z,1509423428.181 [Default:CheckIn] Stopped
2017-10-31T04:17:08.181Z,1509423428.181 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T04:17:08.181Z,1509423428.181 [Default:CheckIn](INFO): Running loop #29
2017-10-31T04:17:08.181Z,1509423428.181 [Default:CheckIn] Running Loop=29
2017-10-31T04:17:08.182Z,1509423428.182 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T04:17:08.182Z,1509423428.182 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T04:17:11.577Z,1509423431.577 [NAL9602](INFO): Powering up
2017-10-31T04:17:22.759Z,1509423442.759 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:17:33.214Z,1509423453.214 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:17:44.022Z,1509423464.022 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002535
CHAN A1 (24V): -0.003561
CHAN A2 (12V): -0.002342
CHAN A3 (5V): 0.000347
CHAN B0 (3.3V): -0.000230
CHAN B1 (3.15aV): -0.000741
CHAN B2 (3.15bV): -0.000055
CHAN B3 (GND): 0.000100
OPEN: -0.000365
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:17:54.762Z,1509423474.762 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T04:17:54.837Z,1509423474.837 [NAL9602](FAULT): received: 
+CSQ:0

OK15, 2, 0, 0, 0

OK
2017-10-31T04:17:54.837Z,1509423474.837 [NAL9602] Data Fault, FailCount= 2
2017-10-31T04:17:54.837Z,1509423474.837 [NAL9602](ERROR): Data Fault
2017-10-31T04:17:54.901Z,1509423474.901 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T04:17:55.162Z,1509423475.162 [NAL9602](INFO): Powering down
2017-10-31T04:17:56.027Z,1509423476.027 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T04:17:56.027Z,1509423476.027 [NAL9602] No Fault, FailCount= 2
2017-10-31T04:18:25.322Z,1509423505.322 [NAL9602](INFO): Powering up NAL9602
2017-10-31T04:18:36.516Z,1509423516.516 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:18:37.321Z,1509423517.321 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T04:18:37.321Z,1509423517.321 [NAL9602] Data Fault, FailCount= 3
2017-10-31T04:18:37.321Z,1509423517.321 [NAL9602](ERROR): Data Fault
2017-10-31T04:18:37.412Z,1509423517.412 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T04:18:37.718Z,1509423517.718 [NAL9602](INFO): Powering down
2017-10-31T04:18:38.588Z,1509423518.588 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T04:18:38.588Z,1509423518.588 [NAL9602] No Fault, FailCount= 3
2017-10-31T04:19:08.118Z,1509423548.118 [NAL9602](INFO): Powering up NAL9602
2017-10-31T04:19:14.347Z,1509423554.347 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:19:19.092Z,1509423559.092 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:19:25.230Z,1509423565.230 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133838
CHAN A1 (24V): -0.004179
CHAN A2 (12V): -0.002195
CHAN A3 (5V): -0.000304
CHAN B0 (3.3V): 0.000396
CHAN B1 (3.15aV): 0.000317
CHAN B2 (3.15bV): -0.000505
CHAN B3 (GND): -0.000248
OPEN: -0.000589
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:20:13.114Z,1509423613.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x34165 got:0x44096
2017-10-31T04:20:14.712Z,1509423614.712 [PNI_TCM](ERROR): CRC does not match. Expected:0x16009 got:0x10269
2017-10-31T04:20:17.911Z,1509423617.911 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T04:20:21.897Z,1509423621.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x39766 got:0x64029
2017-10-31T04:20:25.911Z,1509423625.911 [PNI_TCM](ERROR): CRC does not match. Expected:0x32693 got:0x15897
2017-10-31T04:20:30.705Z,1509423630.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x47052 got:0x6978
2017-10-31T04:20:34.693Z,1509423634.693 [PNI_TCM](ERROR): CRC does not match. Expected:0x2268 got:0x7490
2017-10-31T04:20:35.511Z,1509423635.511 [PNI_TCM](ERROR): CRC does not match. Expected:0x57408 got:0x6978
2017-10-31T04:20:41.070Z,1509423641.070 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:20:41.070Z,1509423641.070 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:20:46.717Z,1509423646.717 [PNI_TCM](ERROR): CRC does not match. Expected:0x47040 got:0x10996
2017-10-31T04:20:55.538Z,1509423655.538 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:21:06.376Z,1509423666.376 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002899
CHAN A1 (24V): -0.003577
CHAN A2 (12V): -0.001986
CHAN A3 (5V): -0.000011
CHAN B0 (3.3V): -0.000004
CHAN B1 (3.15aV): 0.000266
CHAN B2 (3.15bV): -0.000039
CHAN B3 (GND): 0.000091
OPEN: -0.000292
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:21:09.114Z,1509423669.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x41380 got:0x63005
2017-10-31T04:22:08.543Z,1509423728.543 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T04:17:08.2Z
2017-10-31T04:22:08.543Z,1509423728.543 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T04:22:08.544Z,1509423728.544 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T04:22:12.542Z,1509423732.542 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:22:12.542Z,1509423732.542 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:22:12.697Z,1509423732.697 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0152.lzma
2017-10-31T04:22:13.460Z,1509423733.460 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0152.lzma.bak
2017-10-31T04:22:13.460Z,1509423733.460 [DataOverHttps](INFO): SBD MOMSN=5177996
2017-10-31T04:22:23.211Z,1509423743.211 [DataOverHttps](INFO): Sending 685 bytes from file Logs/20171030T210256/Express0153.lzma
2017-10-31T04:22:23.957Z,1509423743.957 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0153.lzma.bak
2017-10-31T04:22:23.957Z,1509423743.957 [DataOverHttps](INFO): SBD MOMSN=5177998
2017-10-31T04:22:24.510Z,1509423744.510 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T04:22:24.510Z,1509423744.510 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T04:22:24.510Z,1509423744.510 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T04:22:28.325Z,1509423748.325 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T04:22:36.490Z,1509423756.490 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:22:47.310Z,1509423767.310 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133821
CHAN A1 (24V): -0.004648
CHAN A2 (12V): -0.002377
CHAN A3 (5V): -0.000023
CHAN B0 (3.3V): 0.000114
CHAN B1 (3.15aV): -0.000070
CHAN B2 (3.15bV): 0.000027
CHAN B3 (GND): -0.000076
OPEN: -0.000588
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:22:58.823Z,1509423778.823 [NAL9602](INFO): Powering down
2017-10-31T04:23:13.683Z,1509423793.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:23:13.683Z,1509423793.683 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T04:23:14.067Z,1509423794.067 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:23:14.068Z,1509423794.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:23:14.068Z,1509423794.068 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:23:20.078Z,1509423800.078 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T04:24:17.503Z,1509423857.503 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:24:31.502Z,1509423871.502 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003516
CHAN A1 (24V): -0.003814
CHAN A2 (12V): -0.001915
CHAN A3 (5V): -0.000220
CHAN B0 (3.3V): -0.000404
CHAN B1 (3.15aV): -0.000020
CHAN B2 (3.15bV): 4.767929
CHAN B3 (GND): 0.000268
OPEN: -0.000626
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:26:01.622Z,1509423961.622 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:26:12.441Z,1509423972.441 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134924
CHAN A1 (24V): -0.003371
CHAN A2 (12V): -0.002385
CHAN A3 (5V): 0.000232
CHAN B0 (3.3V): -0.000387
CHAN B1 (3.15aV): -0.000808
CHAN B2 (3.15bV): -0.000363
CHAN B3 (GND): 0.000206
OPEN: -0.000580
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:26:14.415Z,1509423974.415 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:26:14.415Z,1509423974.415 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T04:26:14.415Z,1509423974.415 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:26:14.448Z,1509423974.448 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:26:14.827Z,1509423974.827 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:26:14.827Z,1509423974.827 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T04:26:15.216Z,1509423975.216 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:26:15.216Z,1509423975.216 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:26:15.217Z,1509423975.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:26:22.797Z,1509423982.797 [BPC1](ERROR): Failed to receive battery data
2017-10-31T04:26:22.797Z,1509423982.797 [BPC1] Communications Fault, FailCount= 1
2017-10-31T04:26:22.797Z,1509423982.797 [BPC1](ERROR): Communications Fault
2017-10-31T04:26:22.820Z,1509423982.820 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T04:26:24.061Z,1509423984.061 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:26:24.061Z,1509423984.061 [BPC1] No Fault, FailCount= 1
2017-10-31T04:27:24.930Z,1509424044.930 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T04:27:24.930Z,1509424044.930 [Default:CheckIn:C.Wait] Stopped
2017-10-31T04:27:24.930Z,1509424044.930 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T04:27:24.931Z,1509424044.931 [Default:CheckIn:D] Running Loop=1
2017-10-31T04:27:25.316Z,1509424045.316 [Default:CheckIn:D] Stopped
2017-10-31T04:27:25.316Z,1509424045.316 [Default:CheckIn:E] Running Loop=1
2017-10-31T04:27:25.720Z,1509424045.720 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 350.293359 min 
2017-10-31T04:27:25.720Z,1509424045.720 [Default:CheckIn:E] Stopped
2017-10-31T04:27:25.721Z,1509424045.721 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T04:27:25.721Z,1509424045.721 [Default:CheckIn] Stopped
2017-10-31T04:27:25.721Z,1509424045.721 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T04:27:25.721Z,1509424045.721 [Default:CheckIn](INFO): Running loop #30
2017-10-31T04:27:25.721Z,1509424045.721 [Default:CheckIn] Running Loop=30
2017-10-31T04:27:25.721Z,1509424045.721 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T04:27:25.721Z,1509424045.721 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T04:27:29.186Z,1509424049.186 [NAL9602](INFO): Powering up
2017-10-31T04:27:40.316Z,1509424060.316 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:27:42.805Z,1509424062.805 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:27:53.616Z,1509424073.616 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003132
CHAN A1 (24V): -0.003668
CHAN A2 (12V): -0.001915
CHAN A3 (5V): 0.000592
CHAN B0 (3.3V): 0.000400
CHAN B1 (3.15aV): -0.000131
CHAN B2 (3.15bV): -0.000826
CHAN B3 (GND): 0.000068
OPEN: -0.000439
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:28:12.315Z,1509424092.315 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T04:28:12.397Z,1509424092.397 [NAL9602](FAULT): received: 
+CSQ:0

OK15, 2, 0, 0, 0

OK
2017-10-31T04:28:12.397Z,1509424092.397 [NAL9602] Data Fault, FailCount= 4
2017-10-31T04:28:12.397Z,1509424092.397 [NAL9602](ERROR): Data Fault
2017-10-31T04:28:12.469Z,1509424092.469 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T04:28:12.715Z,1509424092.715 [NAL9602](INFO): Powering down
2017-10-31T04:28:13.595Z,1509424093.595 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T04:28:13.595Z,1509424093.595 [NAL9602] No Fault, FailCount= 4
2017-10-31T04:28:42.735Z,1509424122.735 [NAL9602](INFO): Powering up NAL9602
2017-10-31T04:28:53.535Z,1509424133.535 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:29:15.614Z,1509424155.614 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:29:15.614Z,1509424155.614 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T04:29:15.614Z,1509424155.614 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:29:15.636Z,1509424155.636 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:29:16.026Z,1509424156.026 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:29:16.027Z,1509424156.027 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T04:29:16.391Z,1509424156.391 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:29:16.391Z,1509424156.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:29:16.392Z,1509424156.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:29:22.777Z,1509424162.777 [BPC1](ERROR): Failed to receive battery data
2017-10-31T04:29:22.777Z,1509424162.777 [BPC1] Communications Fault, FailCount= 1
2017-10-31T04:29:22.777Z,1509424162.777 [BPC1](ERROR): Communications Fault
2017-10-31T04:29:22.813Z,1509424162.813 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T04:29:24.018Z,1509424164.018 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:29:24.018Z,1509424164.018 [BPC1] No Fault, FailCount= 1
2017-10-31T04:29:24.019Z,1509424164.019 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:29:29.932Z,1509424169.932 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T04:29:34.719Z,1509424174.719 [PNI_TCM](ERROR): CRC does not match. Expected:0x9832 got:0x38940
2017-10-31T04:29:35.124Z,1509424175.124 [PNI_TCM](ERROR): CRC does not match. Expected:0x4066 got:0x8221
2017-10-31T04:29:36.324Z,1509424176.324 [PNI_TCM](ERROR): CRC does not match. Expected:0x36970 got:0x61465
2017-10-31T04:29:37.601Z,1509424177.601 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133923
CHAN A1 (24V): -0.004045
CHAN A2 (12V): -0.002323
CHAN A3 (5V): 0.000321
CHAN B0 (3.3V): 0.000123
CHAN B1 (3.15aV): -0.000385
CHAN B2 (3.15bV): 0.000339
CHAN B3 (GND): -0.000313
OPEN: -0.000194
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:29:42.726Z,1509424182.726 [PNI_TCM](ERROR): CRC does not match. Expected:0x50794 got:0x6978
2017-10-31T04:29:50.731Z,1509424190.731 [PNI_TCM](ERROR): CRC does not match. Expected:0x59814 got:0x9172
2017-10-31T04:29:51.508Z,1509424191.508 [PNI_TCM](ERROR): CRC does not match. Expected:0x15350 got:0x1857
2017-10-31T04:29:52.327Z,1509424192.327 [PNI_TCM](ERROR): CRC does not match. Expected:0x17657 got:0x1857
2017-10-31T04:29:55.531Z,1509424195.531 [PNI_TCM](ERROR): CRC does not match. Expected:0x39603 got:0x291
2017-10-31T04:30:05.522Z,1509424205.522 [PNI_TCM](ERROR): CRC does not match. Expected:0x44316 got:0x10995
2017-10-31T04:30:15.513Z,1509424215.513 [PNI_TCM](ERROR): CRC does not match. Expected:0x2076 got:0x16981
2017-10-31T04:30:19.920Z,1509424219.920 [PNI_TCM](ERROR): CRC does not match. Expected:0x40571 got:0x63512
2017-10-31T04:30:45.698Z,1509424245.698 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:30:45.698Z,1509424245.698 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:31:07.788Z,1509424267.788 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:31:18.583Z,1509424278.583 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003151
CHAN A1 (24V): -0.004210
CHAN A2 (12V): -0.002083
CHAN A3 (5V): 0.000379
CHAN B0 (3.3V): -0.000324
CHAN B1 (3.15aV): 0.000504
CHAN B2 (3.15bV): 0.000111
CHAN B3 (GND): 0.000450
OPEN: -0.000477
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:31:52.656Z,1509424312.656 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:31:52.656Z,1509424312.656 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:32:16.710Z,1509424336.710 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:32:16.711Z,1509424336.711 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T04:32:16.711Z,1509424336.711 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:32:16.727Z,1509424336.727 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:32:17.135Z,1509424337.135 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:32:17.135Z,1509424337.135 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T04:32:17.490Z,1509424337.490 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:32:17.491Z,1509424337.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:32:17.491Z,1509424337.491 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:32:20.252Z,1509424340.252 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:32:20.252Z,1509424340.252 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:32:25.939Z,1509424345.939 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T04:27:25.7Z
2017-10-31T04:32:25.940Z,1509424345.940 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T04:32:25.940Z,1509424345.940 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T04:32:30.240Z,1509424350.240 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0156.lzma
2017-10-31T04:32:30.993Z,1509424350.993 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0156.lzma.bak
2017-10-31T04:32:30.993Z,1509424350.993 [DataOverHttps](INFO): SBD MOMSN=5178016
2017-10-31T04:32:43.199Z,1509424363.199 [DataOverHttps](INFO): Sending 673 bytes from file Logs/20171030T210256/Express0157.lzma
2017-10-31T04:32:43.234Z,1509424363.234 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T04:32:43.965Z,1509424363.965 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0157.lzma.bak
2017-10-31T04:32:43.965Z,1509424363.965 [DataOverHttps](INFO): SBD MOMSN=5178018
2017-10-31T04:32:44.470Z,1509424364.470 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T04:32:44.470Z,1509424364.470 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T04:32:44.470Z,1509424364.470 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T04:32:48.671Z,1509424368.671 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:32:59.481Z,1509424379.481 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133894
CHAN A1 (24V): -0.004248
CHAN A2 (12V): -0.002239
CHAN A3 (5V): -0.000451
CHAN B0 (3.3V): 0.000346
CHAN B1 (3.15aV): -0.000288
CHAN B2 (3.15bV): 0.000043
CHAN B3 (GND): -0.000318
OPEN: -0.000438
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:33:13.795Z,1509424393.795 [NAL9602](INFO): Powering down
2017-10-31T04:33:20.258Z,1509424400.258 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T04:34:29.703Z,1509424469.703 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:34:40.508Z,1509424480.508 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002904
CHAN A1 (24V): -0.003909
CHAN A2 (12V): -0.001450
CHAN A3 (5V): 0.000047
CHAN B0 (3.3V): -0.000068
CHAN B1 (3.15aV): 0.000308
CHAN B2 (3.15bV): -0.000273
CHAN B3 (GND): 0.000143
OPEN: -0.000503
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:35:17.808Z,1509424517.808 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:35:17.808Z,1509424517.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T04:35:17.808Z,1509424517.808 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:35:17.846Z,1509424517.846 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:35:18.210Z,1509424518.210 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:35:18.211Z,1509424518.211 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T04:35:18.621Z,1509424518.621 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:35:18.621Z,1509424518.621 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:35:18.622Z,1509424518.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:35:50.741Z,1509424550.741 [PNI_TCM](ERROR): CRC does not match. Expected:0x63735 got:0x46616
2017-10-31T04:35:52.346Z,1509424552.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x19003 got:0x7960
2017-10-31T04:35:57.139Z,1509424557.139 [PNI_TCM](ERROR): CRC does not match. Expected:0x10982 got:0x49068
2017-10-31T04:35:58.740Z,1509424558.740 [PNI_TCM](ERROR): CRC does not match. Expected:0x1925 got:0x48409
2017-10-31T04:36:00.741Z,1509424560.741 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T04:36:01.946Z,1509424561.946 [PNI_TCM](ERROR): CRC does not match. Expected:0x36574 got:0x16981
2017-10-31T04:36:05.936Z,1509424565.936 [BPC1](ERROR): Failed to receive battery data
2017-10-31T04:36:05.936Z,1509424565.936 [BPC1] Communications Fault, FailCount= 1
2017-10-31T04:36:05.936Z,1509424565.936 [BPC1](ERROR): Communications Fault
2017-10-31T04:36:05.995Z,1509424565.995 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T04:36:07.193Z,1509424567.193 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:36:07.193Z,1509424567.193 [BPC1] No Fault, FailCount= 1
2017-10-31T04:36:08.740Z,1509424568.740 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T04:36:09.945Z,1509424569.945 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T04:36:10.761Z,1509424570.761 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:36:18.329Z,1509424578.329 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T04:36:21.585Z,1509424581.585 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134772
CHAN A1 (24V): -0.003115
CHAN A2 (12V): -0.002207
CHAN A3 (5V): 0.000161
CHAN B0 (3.3V): -0.000422
CHAN B1 (3.15aV): -0.000331
CHAN B2 (3.15bV): -0.000490
CHAN B3 (GND): 0.000361
OPEN: -0.000350
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:36:24.344Z,1509424584.344 [PNI_TCM](ERROR): CRC does not match. Expected:0x30018 got:0x60535
2017-10-31T04:36:25.942Z,1509424585.942 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T04:36:27.943Z,1509424587.943 [PNI_TCM](ERROR): CRC does not match. Expected:0x11595 got:0x44272
2017-10-31T04:36:37.137Z,1509424597.137 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T04:37:45.121Z,1509424665.121 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T04:37:45.121Z,1509424665.121 [Default:CheckIn:C.Wait] Stopped
2017-10-31T04:37:45.121Z,1509424665.121 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T04:37:45.121Z,1509424665.121 [Default:CheckIn:D] Running Loop=1
2017-10-31T04:37:45.519Z,1509424665.519 [Default:CheckIn:D] Stopped
2017-10-31T04:37:45.519Z,1509424665.519 [Default:CheckIn:E] Running Loop=1
2017-10-31T04:37:45.937Z,1509424665.937 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 360.630078 min 
2017-10-31T04:37:45.937Z,1509424665.937 [Default:CheckIn:E] Stopped
2017-10-31T04:37:45.938Z,1509424665.938 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T04:37:45.938Z,1509424665.938 [Default:CheckIn] Stopped
2017-10-31T04:37:45.938Z,1509424665.938 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T04:37:45.938Z,1509424665.938 [Default:CheckIn](INFO): Running loop #31
2017-10-31T04:37:45.938Z,1509424665.938 [Default:CheckIn] Running Loop=31
2017-10-31T04:37:45.938Z,1509424665.938 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T04:37:45.939Z,1509424665.939 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T04:37:49.461Z,1509424669.461 [NAL9602](INFO): Powering up
2017-10-31T04:37:51.878Z,1509424671.878 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:38:00.609Z,1509424680.609 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:38:01.400Z,1509424681.400 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T04:38:01.400Z,1509424681.400 [NAL9602] Data Fault, FailCount= 5
2017-10-31T04:38:01.400Z,1509424681.400 [NAL9602](ERROR): Data Fault
2017-10-31T04:38:01.475Z,1509424681.475 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T04:38:01.475Z,1509424681.475 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T04:38:01.806Z,1509424681.806 [NAL9602](INFO): Powering down
2017-10-31T04:38:01.878Z,1509424681.878 [CBIT](INFO): Critical error at 20171031T043801
2017-10-31T04:38:02.671Z,1509424682.671 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002645
CHAN A1 (24V): -0.004506
CHAN A2 (12V): -0.002294
CHAN A3 (5V): -0.000117
CHAN B0 (3.3V): -0.000540
CHAN B1 (3.15aV): -0.000552
CHAN B2 (3.15bV): 0.000105
CHAN B3 (GND): -0.000925
OPEN: -0.000394
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:38:17.438Z,1509424697.438 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T04:38:17.438Z,1509424697.438 [BPC1] Data Fault, FailCount= 1
2017-10-31T04:38:17.438Z,1509424697.438 [BPC1](ERROR): Data Fault
2017-10-31T04:38:17.499Z,1509424697.499 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T04:38:18.666Z,1509424698.666 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:38:18.666Z,1509424698.666 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T04:38:18.666Z,1509424698.666 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:38:18.680Z,1509424698.680 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:38:18.680Z,1509424698.680 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:38:18.681Z,1509424698.681 [BPC1] No Fault, FailCount= 1
2017-10-31T04:38:19.113Z,1509424699.113 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:38:19.113Z,1509424699.113 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T04:38:19.450Z,1509424699.450 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:38:19.451Z,1509424699.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:38:19.451Z,1509424699.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:39:32.844Z,1509424772.844 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:39:43.646Z,1509424783.646 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003642
CHAN A1 (24V): -0.003768
CHAN A2 (12V): -0.002233
CHAN A3 (5V): 0.000518
CHAN B0 (3.3V): 0.000043
CHAN B1 (3.15aV): -0.000175
CHAN B2 (3.15bV): 0.000054
CHAN B3 (GND): -0.000071
OPEN: -0.000504
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:40:01.443Z,1509424801.443 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T04:40:01.443Z,1509424801.443 [NAL9602] No Fault, FailCount= 5
2017-10-31T04:40:01.788Z,1509424801.788 [NAL9602](INFO): Powering up NAL9602
2017-10-31T04:40:12.589Z,1509424812.589 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:41:13.681Z,1509424873.681 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:41:19.652Z,1509424879.652 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:41:19.652Z,1509424879.652 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T04:41:19.652Z,1509424879.652 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:41:19.702Z,1509424879.702 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:41:20.086Z,1509424880.086 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:41:20.086Z,1509424880.086 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T04:41:20.458Z,1509424880.458 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:41:20.458Z,1509424880.458 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:41:20.463Z,1509424880.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:41:24.471Z,1509424884.471 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002780
CHAN A1 (24V): -0.004351
CHAN A2 (12V): -0.002318
CHAN A3 (5V): -0.000018
CHAN B0 (3.3V): 0.000213
CHAN B1 (3.15aV): -0.000552
CHAN B2 (3.15bV): 0.000116
CHAN B3 (GND): 0.000023
OPEN: -0.000571
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:41:29.600Z,1509424889.600 [NAL9602](INFO): SBD MO Status=2, MOMSN=3315, MT Status=2, MTMSN=0
2017-10-31T04:41:29.600Z,1509424889.600 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:42:19.091Z,1509424939.091 [NAL9602](INFO): SBD MO Status=0, MOMSN=3315, MT Status=0, MTMSN=0
2017-10-31T04:42:19.091Z,1509424939.091 [NAL9602](INFO): No messages in MT queue
2017-10-31T04:42:19.091Z,1509424939.091 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2017-10-31T04:42:23.096Z,1509424943.096 [NAL9602](INFO): GPS fix at 20171031T044220: (36.802777, -121.787935)
2017-10-31T04:42:23.158Z,1509424943.158 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T04:42:23.159Z,1509424943.159 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T04:42:29.133Z,1509424949.133 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20171030T210256/Courier0160.lzma
2017-10-31T04:42:29.925Z,1509424949.925 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0160.lzma.bak
2017-10-31T04:42:29.925Z,1509424949.925 [DataOverHttps](INFO): SBD MOMSN=5178035
2017-10-31T04:42:39.113Z,1509424959.113 [DataOverHttps](INFO): Sending 653 bytes from file Logs/20171030T210256/Express0161.lzma
2017-10-31T04:42:39.883Z,1509424959.883 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0161.lzma.bak
2017-10-31T04:42:39.884Z,1509424959.884 [DataOverHttps](INFO): SBD MOMSN=5178039
2017-10-31T04:42:40.351Z,1509424960.351 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T04:42:40.351Z,1509424960.351 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T04:42:40.351Z,1509424960.351 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T04:42:54.717Z,1509424974.717 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:42:59.454Z,1509424979.454 [NAL9602](INFO): Powering down
2017-10-31T04:43:05.525Z,1509424985.525 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134129
CHAN A1 (24V): -0.003718
CHAN A2 (12V): -0.002053
CHAN A3 (5V): 0.000463
CHAN B0 (3.3V): 0.000040
CHAN B1 (3.15aV): -0.000345
CHAN B2 (3.15bV): -0.000331
CHAN B3 (GND): -0.000071
OPEN: -0.000323
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:43:18.338Z,1509424998.338 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T04:43:18.338Z,1509424998.338 [BPC1] Data Fault, FailCount= 1
2017-10-31T04:43:18.338Z,1509424998.338 [BPC1](ERROR): Data Fault
2017-10-31T04:43:18.385Z,1509424998.385 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T04:43:19.586Z,1509424999.586 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:43:19.587Z,1509424999.587 [BPC1] No Fault, FailCount= 1
2017-10-31T04:43:20.318Z,1509425000.318 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T04:44:20.473Z,1509425060.473 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:44:20.473Z,1509425060.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T04:44:20.473Z,1509425060.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:44:20.486Z,1509425060.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:44:20.885Z,1509425060.885 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:44:20.885Z,1509425060.885 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T04:44:21.275Z,1509425061.275 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:44:21.275Z,1509425061.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:44:21.275Z,1509425061.275 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:44:35.699Z,1509425075.699 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:44:48.726Z,1509425088.726 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003030
CHAN A1 (24V): -0.003686
CHAN A2 (12V): -0.002262
CHAN A3 (5V): 0.000477
CHAN B0 (3.3V): 0.000234
CHAN B1 (3.15aV): -0.000046
CHAN B2 (3.15bV): -0.000061
CHAN B3 (GND): 0.000108
OPEN: -0.000242
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:45:10.711Z,1509425110.711 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T04:45:10.711Z,1509425110.711 [BPC1] Data Fault, FailCount= 1
2017-10-31T04:45:10.711Z,1509425110.711 [BPC1](ERROR): Data Fault
2017-10-31T04:45:10.771Z,1509425110.771 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T04:45:11.948Z,1509425111.948 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:45:11.948Z,1509425111.948 [BPC1] No Fault, FailCount= 1
2017-10-31T04:46:19.001Z,1509425179.001 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:46:29.837Z,1509425189.837 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134659
CHAN A1 (24V): -0.003583
CHAN A2 (12V): -0.002316
CHAN A3 (5V): 0.000554
CHAN B0 (3.3V): -0.000089
CHAN B1 (3.15aV): 0.000022
CHAN B2 (3.15bV): 0.000016
CHAN B3 (GND): -0.000416
OPEN: -0.000497
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:47:21.429Z,1509425241.429 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:47:21.429Z,1509425241.429 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T04:47:21.429Z,1509425241.429 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:47:21.455Z,1509425241.455 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:47:21.843Z,1509425241.843 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:47:21.843Z,1509425241.843 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T04:47:22.240Z,1509425242.240 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:47:22.240Z,1509425242.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:47:22.241Z,1509425242.241 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:47:41.047Z,1509425261.047 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T04:47:41.048Z,1509425261.048 [Default:CheckIn:C.Wait] Stopped
2017-10-31T04:47:41.048Z,1509425261.048 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T04:47:41.048Z,1509425261.048 [Default:CheckIn:D] Running Loop=1
2017-10-31T04:47:41.444Z,1509425261.444 [Default:CheckIn:D] Stopped
2017-10-31T04:47:41.444Z,1509425261.444 [Default:CheckIn:E] Running Loop=1
2017-10-31T04:47:41.843Z,1509425261.843 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 370.562174 min 
2017-10-31T04:47:41.844Z,1509425261.844 [Default:CheckIn:E] Stopped
2017-10-31T04:47:41.844Z,1509425261.844 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T04:47:41.844Z,1509425261.844 [Default:CheckIn] Stopped
2017-10-31T04:47:41.844Z,1509425261.844 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T04:47:41.844Z,1509425261.844 [Default:CheckIn](INFO): Running loop #32
2017-10-31T04:47:41.844Z,1509425261.844 [Default:CheckIn] Running Loop=32
2017-10-31T04:47:41.844Z,1509425261.844 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T04:47:41.845Z,1509425261.845 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T04:47:45.221Z,1509425265.221 [NAL9602](INFO): Powering up
2017-10-31T04:47:56.375Z,1509425276.375 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:48:00.069Z,1509425280.069 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:48:10.872Z,1509425290.872 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134121
CHAN A1 (24V): -0.004054
CHAN A2 (12V): -0.002268
CHAN A3 (5V): 0.000471
CHAN B0 (3.3V): -0.000495
CHAN B1 (3.15aV): -0.000532
CHAN B2 (3.15bV): -0.000155
CHAN B3 (GND): -0.000232
OPEN: -0.000465
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:48:13.587Z,1509425293.587 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T04:48:13.587Z,1509425293.587 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:48:50.513Z,1509425330.513 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T04:48:50.514Z,1509425330.514 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:49:02.541Z,1509425342.541 [BPC1](ERROR): Failed to receive battery data
2017-10-31T04:49:02.541Z,1509425342.541 [BPC1] Communications Fault, FailCount= 1
2017-10-31T04:49:02.541Z,1509425342.541 [BPC1](ERROR): Communications Fault
2017-10-31T04:49:02.615Z,1509425342.615 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T04:49:03.792Z,1509425343.792 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T04:49:03.792Z,1509425343.792 [BPC1] No Fault, FailCount= 1
2017-10-31T04:49:08.113Z,1509425348.113 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T04:49:08.114Z,1509425348.114 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:49:40.999Z,1509425380.999 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:49:54.972Z,1509425394.972 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133865
CHAN A1 (24V): -0.004344
CHAN A2 (12V): -0.001885
CHAN A3 (5V): -0.000541
CHAN B0 (3.3V): -0.000054
CHAN B1 (3.15aV): -0.000588
CHAN B2 (3.15bV): -0.000496
CHAN B3 (GND): -0.000322
OPEN: -0.000250
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:50:03.713Z,1509425403.713 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T04:50:03.713Z,1509425403.713 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:50:22.569Z,1509425422.569 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:50:22.569Z,1509425422.569 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T04:50:22.569Z,1509425422.569 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:50:22.582Z,1509425422.582 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:50:23.018Z,1509425423.018 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:50:23.018Z,1509425423.018 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T04:50:23.390Z,1509425423.390 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:50:23.391Z,1509425423.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:50:23.391Z,1509425423.391 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:50:29.714Z,1509425429.714 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T04:50:29.715Z,1509425429.715 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:50:47.070Z,1509425447.070 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T04:50:47.070Z,1509425447.070 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:51:25.136Z,1509425485.136 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:51:35.980Z,1509425495.980 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002713
CHAN A1 (24V): -0.003521
CHAN A2 (12V): -0.002477
CHAN A3 (5V): 0.000100
CHAN B0 (3.3V): -0.000121
CHAN B1 (3.15aV): -0.000337
CHAN B2 (3.15bV): -0.000155
CHAN B3 (GND): 0.000320
OPEN: -0.000407
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:52:42.093Z,1509425562.093 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T04:47:41.8Z
2017-10-31T04:52:42.093Z,1509425562.093 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T04:52:42.093Z,1509425562.093 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T04:52:46.396Z,1509425566.396 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0164.lzma
2017-10-31T04:52:47.176Z,1509425567.176 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0164.lzma.bak
2017-10-31T04:52:47.176Z,1509425567.176 [DataOverHttps](INFO): SBD MOMSN=5178057
2017-10-31T04:52:56.381Z,1509425576.381 [DataOverHttps](INFO): Sending 550 bytes from file Logs/20171030T210256/Express0165.lzma
2017-10-31T04:52:57.163Z,1509425577.163 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0165.lzma.bak
2017-10-31T04:52:57.164Z,1509425577.164 [DataOverHttps](INFO): SBD MOMSN=5178059
2017-10-31T04:52:57.630Z,1509425577.630 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T04:52:57.630Z,1509425577.630 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T04:52:57.630Z,1509425577.630 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T04:53:01.302Z,1509425581.302 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T04:53:06.267Z,1509425586.267 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:53:17.102Z,1509425597.102 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002884
CHAN A1 (24V): -0.004235
CHAN A2 (12V): -0.002310
CHAN A3 (5V): 0.000197
CHAN B0 (3.3V): -0.000119
CHAN B1 (3.15aV): -0.000323
CHAN B2 (3.15bV): -0.000167
CHAN B3 (GND): 0.000149
OPEN: -0.000321
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:53:20.672Z,1509425600.672 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T04:53:23.454Z,1509425603.454 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:53:23.455Z,1509425603.455 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T04:53:23.455Z,1509425603.455 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:53:23.468Z,1509425603.468 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:53:23.870Z,1509425603.870 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:53:23.871Z,1509425603.871 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T04:53:24.255Z,1509425604.255 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:53:24.256Z,1509425604.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:53:24.256Z,1509425604.256 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:53:31.813Z,1509425611.813 [NAL9602](INFO): Powering down
2017-10-31T04:54:47.246Z,1509425687.246 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:54:58.072Z,1509425698.072 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003593
CHAN A1 (24V): -0.003394
CHAN A2 (12V): -0.002165
CHAN A3 (5V): 0.000005
CHAN B0 (3.3V): -0.000178
CHAN B1 (3.15aV): 0.000122
CHAN B2 (3.15bV): -0.000796
CHAN B3 (GND): 0.000061
OPEN: -0.000388
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:56:24.509Z,1509425784.509 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:56:24.509Z,1509425784.509 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T04:56:24.509Z,1509425784.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:56:24.553Z,1509425784.553 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:56:24.950Z,1509425784.950 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:56:24.950Z,1509425784.950 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T04:56:25.312Z,1509425785.312 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:56:25.313Z,1509425785.313 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:56:25.313Z,1509425785.313 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:56:28.155Z,1509425788.155 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:56:38.911Z,1509425798.911 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003312
CHAN A1 (24V): -0.003871
CHAN A2 (12V): -0.002123
CHAN A3 (5V): 0.000350
CHAN B0 (3.3V): -0.000119
CHAN B1 (3.15aV): 0.000632
CHAN B2 (3.15bV): 0.000472
CHAN B3 (GND): -0.000375
OPEN: -0.000383
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:57:58.097Z,1509425878.097 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T04:57:58.097Z,1509425878.097 [Default:CheckIn:C.Wait] Stopped
2017-10-31T04:57:58.097Z,1509425878.097 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T04:57:58.097Z,1509425878.097 [Default:CheckIn:D] Running Loop=1
2017-10-31T04:57:58.488Z,1509425878.488 [Default:CheckIn:D] Stopped
2017-10-31T04:57:58.488Z,1509425878.488 [Default:CheckIn:E] Running Loop=1
2017-10-31T04:57:58.920Z,1509425878.920 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 380.846224 min 
2017-10-31T04:57:58.920Z,1509425878.920 [Default:CheckIn:E] Stopped
2017-10-31T04:57:58.920Z,1509425878.920 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T04:57:58.921Z,1509425878.921 [Default:CheckIn] Stopped
2017-10-31T04:57:58.921Z,1509425878.921 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T04:57:58.921Z,1509425878.921 [Default:CheckIn](INFO): Running loop #33
2017-10-31T04:57:58.921Z,1509425878.921 [Default:CheckIn] Running Loop=33
2017-10-31T04:57:58.921Z,1509425878.921 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T04:57:58.921Z,1509425878.921 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T04:58:02.517Z,1509425882.517 [NAL9602](INFO): Powering up
2017-10-31T04:58:09.135Z,1509425889.135 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T04:58:13.456Z,1509425893.456 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:58:14.256Z,1509425894.256 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T04:58:14.256Z,1509425894.256 [NAL9602] Data Fault, FailCount= 1
2017-10-31T04:58:14.256Z,1509425894.256 [NAL9602](ERROR): Data Fault
2017-10-31T04:58:14.341Z,1509425894.341 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T04:58:14.662Z,1509425894.662 [NAL9602](INFO): Powering down
2017-10-31T04:58:15.530Z,1509425895.530 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T04:58:15.530Z,1509425895.530 [NAL9602] No Fault, FailCount= 1
2017-10-31T04:58:19.959Z,1509425899.959 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134106
CHAN A1 (24V): -0.004556
CHAN A2 (12V): -0.002288
CHAN A3 (5V): 0.000209
CHAN B0 (3.3V): -0.000237
CHAN B1 (3.15aV): 0.000001
CHAN B2 (3.15bV): 0.000007
CHAN B3 (GND): -0.000189
OPEN: -0.000517
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T04:58:45.056Z,1509425925.056 [NAL9602](INFO): Powering up NAL9602
2017-10-31T04:58:55.857Z,1509425935.857 [NAL9602](INFO): NAL9602 initialized
2017-10-31T04:59:25.329Z,1509425965.329 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T04:59:25.329Z,1509425965.329 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T04:59:25.329Z,1509425965.329 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T04:59:25.344Z,1509425965.344 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T04:59:25.767Z,1509425965.767 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T04:59:25.768Z,1509425965.768 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T04:59:26.135Z,1509425966.135 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T04:59:26.135Z,1509425966.135 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T04:59:26.136Z,1509425966.136 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T04:59:29.684Z,1509425969.684 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T04:59:29.684Z,1509425969.684 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T04:59:50.144Z,1509425990.144 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:00:03.313Z,1509426003.313 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003253
CHAN A1 (24V): -0.003988
CHAN A2 (12V): -0.001850
CHAN A3 (5V): -0.000195
CHAN B0 (3.3V): -0.000333
CHAN B1 (3.15aV): 0.000401
CHAN B2 (3.15bV): 0.000110
CHAN B3 (GND): 0.000361
OPEN: -0.000659
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:00:04.445Z,1509426004.445 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T05:00:04.445Z,1509426004.445 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T05:01:19.658Z,1509426079.658 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T05:01:19.658Z,1509426079.658 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T05:01:33.354Z,1509426093.354 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:01:44.162Z,1509426104.162 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134591
CHAN A1 (24V): -0.003853
CHAN A2 (12V): -0.002479
CHAN A3 (5V): 0.000003
CHAN B0 (3.3V): -0.000219
CHAN B1 (3.15aV): 0.000293
CHAN B2 (3.15bV): -0.000401
CHAN B3 (GND): -0.000421
OPEN: -0.000718
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:02:26.266Z,1509426146.266 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:02:26.267Z,1509426146.267 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T05:02:26.267Z,1509426146.267 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:02:26.305Z,1509426146.305 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:02:26.751Z,1509426146.751 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:02:26.751Z,1509426146.751 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T05:02:27.075Z,1509426147.075 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:02:27.076Z,1509426147.076 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:02:27.076Z,1509426147.076 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:02:59.083Z,1509426179.083 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T04:57:58.9Z
2017-10-31T05:02:59.083Z,1509426179.083 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T05:02:59.083Z,1509426179.083 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T05:03:03.656Z,1509426183.656 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0168.lzma
2017-10-31T05:03:04.409Z,1509426184.409 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0168.lzma.bak
2017-10-31T05:03:04.409Z,1509426184.409 [DataOverHttps](INFO): SBD MOMSN=5178074
2017-10-31T05:03:13.793Z,1509426193.793 [DataOverHttps](INFO): Sending 637 bytes from file Logs/20171030T210256/Express0169.lzma
2017-10-31T05:03:14.249Z,1509426194.249 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:03:14.564Z,1509426194.564 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0169.lzma.bak
2017-10-31T05:03:14.564Z,1509426194.564 [DataOverHttps](INFO): SBD MOMSN=5178076
2017-10-31T05:03:15.044Z,1509426195.044 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T05:03:15.044Z,1509426195.044 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T05:03:15.044Z,1509426195.044 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T05:03:21.054Z,1509426201.054 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T05:03:28.239Z,1509426208.239 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134241
CHAN A1 (24V): -0.004819
CHAN A2 (12V): -0.001765
CHAN A3 (5V): -0.000427
CHAN B0 (3.3V): 0.000019
CHAN B1 (3.15aV): -0.000013
CHAN B2 (3.15bV): -0.000735
CHAN B3 (GND): -0.000035
OPEN: -0.000468
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:03:40.591Z,1509426220.591 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T05:03:40.591Z,1509426220.591 [BPC1] Data Fault, FailCount= 1
2017-10-31T05:03:40.592Z,1509426220.592 [BPC1](ERROR): Data Fault
2017-10-31T05:03:40.615Z,1509426220.615 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T05:03:41.822Z,1509426221.822 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:03:41.822Z,1509426221.822 [BPC1] No Fault, FailCount= 1
2017-10-31T05:03:58.964Z,1509426238.964 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T05:04:29.608Z,1509426269.608 [NAL9602](INFO): Powering down
2017-10-31T05:04:58.463Z,1509426298.463 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:05:09.264Z,1509426309.264 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003297
CHAN A1 (24V): -0.003356
CHAN A2 (12V): -0.002619
CHAN A3 (5V): -0.000067
CHAN B0 (3.3V): -0.000287
CHAN B1 (3.15aV): -0.000270
CHAN B2 (3.15bV): -0.000145
CHAN B3 (GND): -0.000047
OPEN: -0.000656
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:05:12.829Z,1509426312.829 [BPC1](ERROR): Failed to receive battery data
2017-10-31T05:05:12.829Z,1509426312.829 [BPC1] Communications Fault, FailCount= 1
2017-10-31T05:05:12.829Z,1509426312.829 [BPC1](ERROR): Communications Fault
2017-10-31T05:05:12.852Z,1509426312.852 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T05:05:14.055Z,1509426314.055 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:05:14.055Z,1509426314.055 [BPC1] No Fault, FailCount= 1
2017-10-31T05:05:27.427Z,1509426327.427 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:05:27.427Z,1509426327.427 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T05:05:27.427Z,1509426327.427 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:05:27.452Z,1509426327.452 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:05:27.832Z,1509426327.832 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:05:27.833Z,1509426327.833 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T05:05:28.223Z,1509426328.223 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:05:28.223Z,1509426328.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:05:28.223Z,1509426328.223 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:06:39.279Z,1509426399.279 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:06:50.075Z,1509426410.075 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003391
CHAN A1 (24V): -0.003136
CHAN A2 (12V): -0.002253
CHAN A3 (5V): -0.000011
CHAN B0 (3.3V): 0.000067
CHAN B1 (3.15aV): -0.000505
CHAN B2 (3.15bV): -0.000042
CHAN B3 (GND): -0.000030
OPEN: -0.000462
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:08:15.459Z,1509426495.459 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T05:08:15.459Z,1509426495.459 [Default:CheckIn:C.Wait] Stopped
2017-10-31T05:08:15.459Z,1509426495.459 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T05:08:15.460Z,1509426495.460 [Default:CheckIn:D] Running Loop=1
2017-10-31T05:08:15.873Z,1509426495.873 [Default:CheckIn:D] Stopped
2017-10-31T05:08:15.873Z,1509426495.873 [Default:CheckIn:E] Running Loop=1
2017-10-31T05:08:16.269Z,1509426496.269 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 391.135970 min 
2017-10-31T05:08:16.270Z,1509426496.270 [Default:CheckIn:E] Stopped
2017-10-31T05:08:16.274Z,1509426496.274 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T05:08:16.274Z,1509426496.274 [Default:CheckIn] Stopped
2017-10-31T05:08:16.274Z,1509426496.274 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T05:08:16.275Z,1509426496.275 [Default:CheckIn](INFO): Running loop #34
2017-10-31T05:08:16.275Z,1509426496.275 [Default:CheckIn] Running Loop=34
2017-10-31T05:08:16.275Z,1509426496.275 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T05:08:16.275Z,1509426496.275 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T05:08:19.939Z,1509426499.939 [NAL9602](INFO): Powering up
2017-10-31T05:08:20.140Z,1509426500.140 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:08:28.466Z,1509426508.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:08:28.466Z,1509426508.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T05:08:28.466Z,1509426508.466 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:08:28.512Z,1509426508.512 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:08:28.894Z,1509426508.894 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:08:28.894Z,1509426508.894 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T05:08:29.270Z,1509426509.270 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:08:29.270Z,1509426509.270 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:08:29.271Z,1509426509.271 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:08:30.820Z,1509426510.820 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:08:30.917Z,1509426510.917 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002990
CHAN A1 (24V): -0.004032
CHAN A2 (12V): -0.002236
CHAN A3 (5V): -0.000029
CHAN B0 (3.3V): -0.000019
CHAN B1 (3.15aV): 0.000084
CHAN B2 (3.15bV): -0.000975
CHAN B3 (GND): -0.000176
OPEN: -0.000421
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:09:02.821Z,1509426542.821 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T05:09:02.905Z,1509426542.905 [NAL9602](FAULT): received: 
+CSQ:0

OK16, 2, 0, 0, 0

OK
2017-10-31T05:09:02.905Z,1509426542.905 [NAL9602] Data Fault, FailCount= 2
2017-10-31T05:09:02.905Z,1509426542.905 [NAL9602](ERROR): Data Fault
2017-10-31T05:09:02.951Z,1509426542.951 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T05:09:03.221Z,1509426543.221 [NAL9602](INFO): Powering down
2017-10-31T05:09:04.102Z,1509426544.102 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T05:09:04.103Z,1509426544.103 [NAL9602] No Fault, FailCount= 2
2017-10-31T05:09:33.419Z,1509426573.419 [NAL9602](INFO): Powering up NAL9602
2017-10-31T05:09:44.222Z,1509426584.222 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:09:45.024Z,1509426585.024 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T05:09:45.024Z,1509426585.024 [NAL9602] Data Fault, FailCount= 3
2017-10-31T05:09:45.024Z,1509426585.024 [NAL9602](ERROR): Data Fault
2017-10-31T05:09:45.115Z,1509426585.115 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T05:09:45.420Z,1509426585.420 [NAL9602](INFO): Powering down
2017-10-31T05:09:46.291Z,1509426586.291 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T05:09:46.291Z,1509426586.291 [NAL9602] No Fault, FailCount= 3
2017-10-31T05:10:01.091Z,1509426601.091 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:10:03.854Z,1509426603.854 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T05:10:03.854Z,1509426603.854 [BPC1] Data Fault, FailCount= 1
2017-10-31T05:10:03.855Z,1509426603.855 [BPC1](ERROR): Data Fault
2017-10-31T05:10:03.917Z,1509426603.917 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T05:10:05.107Z,1509426605.107 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:10:05.107Z,1509426605.107 [BPC1] No Fault, FailCount= 1
2017-10-31T05:10:11.908Z,1509426611.908 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003234
CHAN A1 (24V): -0.003476
CHAN A2 (12V): -0.002488
CHAN A3 (5V): 0.000401
CHAN B0 (3.3V): 0.000078
CHAN B1 (3.15aV): -0.000547
CHAN B2 (3.15bV): 0.000108
CHAN B3 (GND): 4.792929
OPEN: -0.000332
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:10:15.424Z,1509426615.424 [NAL9602](INFO): Powering up NAL9602
2017-10-31T05:10:26.375Z,1509426626.375 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:10:27.607Z,1509426627.607 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T05:10:59.158Z,1509426659.158 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T05:10:59.158Z,1509426659.158 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T05:10:59.600Z,1509426659.600 [PNI_TCM](ERROR): CRC does not match. Expected:0x14648 got:0x38168
2017-10-31T05:11:00.391Z,1509426660.391 [PNI_TCM](ERROR): CRC does not match. Expected:0x52980 got:0x60485
2017-10-31T05:11:29.434Z,1509426689.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:11:29.434Z,1509426689.434 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T05:11:29.434Z,1509426689.434 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:11:29.485Z,1509426689.485 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:11:29.834Z,1509426689.834 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:11:29.834Z,1509426689.834 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T05:11:30.214Z,1509426690.214 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:11:30.214Z,1509426690.214 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:11:30.215Z,1509426690.215 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:11:42.257Z,1509426702.257 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:11:53.050Z,1509426713.050 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134907
CHAN A1 (24V): -0.004368
CHAN A2 (12V): -0.002209
CHAN A3 (5V): 0.000644
CHAN B0 (3.3V): 0.000608
CHAN B1 (3.15aV): -0.000863
CHAN B2 (3.15bV): -0.000591
CHAN B3 (GND): 0.000094
OPEN: -0.000624
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:13:16.691Z,1509426796.691 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T05:08:16.3Z
2017-10-31T05:13:16.691Z,1509426796.691 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T05:13:16.692Z,1509426796.692 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T05:13:20.801Z,1509426800.801 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0172.lzma
2017-10-31T05:13:21.267Z,1509426801.267 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T05:13:21.584Z,1509426801.584 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0172.lzma.bak
2017-10-31T05:13:21.584Z,1509426801.584 [DataOverHttps](INFO): SBD MOMSN=5178093
2017-10-31T05:13:25.986Z,1509426805.986 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:13:31.148Z,1509426811.148 [DataOverHttps](INFO): Sending 690 bytes from file Logs/20171030T210256/Express0173.lzma
2017-10-31T05:13:31.952Z,1509426811.952 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0173.lzma.bak
2017-10-31T05:13:31.952Z,1509426811.952 [DataOverHttps](INFO): SBD MOMSN=5178095
2017-10-31T05:13:32.418Z,1509426812.418 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T05:13:32.418Z,1509426812.418 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T05:13:32.418Z,1509426812.418 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T05:13:36.014Z,1509426816.014 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T05:13:41.452Z,1509426821.452 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002562
CHAN A1 (24V): -0.004966
CHAN A2 (12V): -0.002213
CHAN A3 (5V): 0.000036
CHAN B0 (3.3V): -0.000215
CHAN B1 (3.15aV): -0.000084
CHAN B2 (3.15bV): -0.000454
CHAN B3 (GND): -0.000009
OPEN: -0.000306
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:14:06.168Z,1509426846.168 [NAL9602](INFO): Powering down
2017-10-31T05:14:30.615Z,1509426870.615 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:14:30.615Z,1509426870.615 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T05:14:30.615Z,1509426870.615 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:14:30.628Z,1509426870.628 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:14:31.114Z,1509426871.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:14:31.114Z,1509426871.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T05:14:31.417Z,1509426871.417 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:14:31.417Z,1509426871.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:14:31.418Z,1509426871.418 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:15:11.729Z,1509426911.729 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:15:22.515Z,1509426922.515 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003370
CHAN A1 (24V): -0.003561
CHAN A2 (12V): -0.002435
CHAN A3 (5V): 0.000064
CHAN B0 (3.3V): -0.000143
CHAN B1 (3.15aV): -0.000513
CHAN B2 (3.15bV): -0.000257
CHAN B3 (GND): 0.000114
OPEN: -0.000224
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:16:52.858Z,1509427012.858 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:17:03.639Z,1509427023.639 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134581
CHAN A1 (24V): -0.003718
CHAN A2 (12V): -0.002345
CHAN A3 (5V): 0.000077
CHAN B0 (3.3V): 4.766929
CHAN B1 (3.15aV): -0.000255
CHAN B2 (3.15bV): 0.000189
CHAN B3 (GND): -0.000174
OPEN: -0.000520
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:17:31.613Z,1509427051.613 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:17:31.613Z,1509427051.613 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T05:17:31.613Z,1509427051.613 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:17:31.652Z,1509427051.652 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:17:32.025Z,1509427052.025 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:17:32.026Z,1509427052.026 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T05:17:32.415Z,1509427052.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:17:32.415Z,1509427052.415 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:17:32.416Z,1509427052.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:18:33.037Z,1509427113.037 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T05:18:33.038Z,1509427113.038 [Default:CheckIn:C.Wait] Stopped
2017-10-31T05:18:33.038Z,1509427113.038 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T05:18:33.038Z,1509427113.038 [Default:CheckIn:D] Running Loop=1
2017-10-31T05:18:33.452Z,1509427113.452 [Default:CheckIn:D] Stopped
2017-10-31T05:18:33.452Z,1509427113.452 [Default:CheckIn:E] Running Loop=1
2017-10-31T05:18:33.850Z,1509427113.850 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 401.428971 min 
2017-10-31T05:18:33.851Z,1509427113.851 [Default:CheckIn:E] Stopped
2017-10-31T05:18:33.851Z,1509427113.851 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T05:18:33.851Z,1509427113.851 [Default:CheckIn] Stopped
2017-10-31T05:18:33.851Z,1509427113.851 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T05:18:33.851Z,1509427113.851 [Default:CheckIn](INFO): Running loop #35
2017-10-31T05:18:33.851Z,1509427113.851 [Default:CheckIn] Running Loop=35
2017-10-31T05:18:33.851Z,1509427113.851 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T05:18:33.852Z,1509427113.852 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T05:18:33.863Z,1509427113.863 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:18:37.422Z,1509427117.422 [NAL9602](INFO): Powering up
2017-10-31T05:18:43.030Z,1509427123.030 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T05:18:43.030Z,1509427123.030 [BPC1] Data Fault, FailCount= 1
2017-10-31T05:18:43.030Z,1509427123.030 [BPC1](ERROR): Data Fault
2017-10-31T05:18:43.070Z,1509427123.070 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T05:18:44.276Z,1509427124.276 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:18:44.276Z,1509427124.276 [BPC1] No Fault, FailCount= 1
2017-10-31T05:18:47.893Z,1509427127.893 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003100
CHAN A1 (24V): -0.003982
CHAN A2 (12V): -0.002218
CHAN A3 (5V): -0.000165
CHAN B0 (3.3V): 0.000260
CHAN B1 (3.15aV): -0.000355
CHAN B2 (3.15bV): 0.000333
CHAN B3 (GND): -0.000185
OPEN: -0.000362
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:18:48.595Z,1509427128.595 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:19:20.594Z,1509427160.594 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T05:19:20.668Z,1509427160.668 [NAL9602](FAULT): received: 
+CSQ:0

OK16, 2, 0, 0, 0

OK
2017-10-31T05:19:20.669Z,1509427160.669 [NAL9602] Data Fault, FailCount= 4
2017-10-31T05:19:20.669Z,1509427160.669 [NAL9602](ERROR): Data Fault
2017-10-31T05:19:20.754Z,1509427160.754 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T05:19:20.994Z,1509427160.994 [NAL9602](INFO): Powering down
2017-10-31T05:19:21.876Z,1509427161.876 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T05:19:21.876Z,1509427161.876 [NAL9602] No Fault, FailCount= 4
2017-10-31T05:19:51.174Z,1509427191.174 [NAL9602](INFO): Powering up NAL9602
2017-10-31T05:20:02.372Z,1509427202.372 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:20:03.627Z,1509427203.627 [PNI_TCM](ERROR): CRC does not match. Expected:0x11791 got:0x15956
2017-10-31T05:20:12.401Z,1509427212.401 [PNI_TCM](ERROR): CRC does not match. Expected:0x5974 got:0x1857
2017-10-31T05:20:16.424Z,1509427216.424 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T05:20:18.034Z,1509427218.034 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:20:28.853Z,1509427228.853 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134347
CHAN A1 (24V): -0.003682
CHAN A2 (12V): -0.002124
CHAN A3 (5V): 0.000106
CHAN B0 (3.3V): -0.000080
CHAN B1 (3.15aV): 0.000083
CHAN B2 (3.15bV): -0.000352
CHAN B3 (GND): -0.000166
OPEN: -0.000412
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:20:32.447Z,1509427232.447 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:20:32.447Z,1509427232.447 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T05:20:32.447Z,1509427232.447 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:20:32.493Z,1509427232.493 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:20:32.854Z,1509427232.854 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:20:32.854Z,1509427232.854 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T05:20:33.217Z,1509427233.217 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:20:33.217Z,1509427233.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:20:33.217Z,1509427233.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:21:58.884Z,1509427318.884 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:22:09.706Z,1509427329.706 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003126
CHAN A1 (24V): -0.004374
CHAN A2 (12V): -0.001598
CHAN A3 (5V): 0.000310
CHAN B0 (3.3V): -0.000290
CHAN B1 (3.15aV): -0.000220
CHAN B2 (3.15bV): -0.000052
CHAN B3 (GND): 4.792929
OPEN: -0.000601
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:23:21.472Z,1509427401.472 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T05:23:33.466Z,1509427413.466 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:23:33.466Z,1509427413.466 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T05:23:33.466Z,1509427413.466 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:23:33.488Z,1509427413.488 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:23:33.852Z,1509427413.852 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T05:18:33.9Z
2017-10-31T05:23:33.852Z,1509427413.852 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T05:23:33.852Z,1509427413.852 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T05:23:33.884Z,1509427413.884 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:23:33.884Z,1509427413.884 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T05:23:34.322Z,1509427414.322 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:23:34.322Z,1509427414.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:23:34.322Z,1509427414.322 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:23:38.433Z,1509427418.433 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0176.lzma
2017-10-31T05:23:39.188Z,1509427419.188 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0176.lzma.bak
2017-10-31T05:23:39.188Z,1509427419.188 [DataOverHttps](INFO): SBD MOMSN=5178113
2017-10-31T05:23:40.075Z,1509427420.075 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:23:48.839Z,1509427428.839 [DataOverHttps](INFO): Sending 665 bytes from file Logs/20171030T210256/Express0177.lzma
2017-10-31T05:23:49.641Z,1509427429.641 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0177.lzma.bak
2017-10-31T05:23:49.641Z,1509427429.641 [DataOverHttps](INFO): SBD MOMSN=5178115
2017-10-31T05:23:50.130Z,1509427430.130 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T05:23:50.130Z,1509427430.130 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T05:23:50.130Z,1509427430.130 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T05:23:53.707Z,1509427433.707 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T05:23:59.174Z,1509427439.174 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133383
CHAN A1 (24V): -0.004580
CHAN A2 (12V): -0.002227
CHAN A3 (5V): 0.000259
CHAN B0 (3.3V): -0.000421
CHAN B1 (3.15aV): -0.000070
CHAN B2 (3.15bV): 0.000052
CHAN B3 (GND): 0.000029
OPEN: -0.000583
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:24:23.905Z,1509427463.905 [NAL9602](INFO): Powering down
2017-10-31T05:25:29.448Z,1509427529.448 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:25:40.249Z,1509427540.249 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134860
CHAN A1 (24V): -0.003283
CHAN A2 (12V): -0.001165
CHAN A3 (5V): 0.000141
CHAN B0 (3.3V): 0.000344
CHAN B1 (3.15aV): -0.000104
CHAN B2 (3.15bV): -0.000093
CHAN B3 (GND): -0.000100
OPEN: -0.000276
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:26:34.625Z,1509427594.625 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:26:34.625Z,1509427594.625 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T05:26:34.625Z,1509427594.625 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:26:34.659Z,1509427594.659 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:26:35.051Z,1509427595.051 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:26:35.051Z,1509427595.051 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T05:26:35.427Z,1509427595.427 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:26:35.432Z,1509427595.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:26:35.432Z,1509427595.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:27:10.392Z,1509427630.392 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:27:21.198Z,1509427641.198 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003184
CHAN A1 (24V): -0.003589
CHAN A2 (12V): -0.002466
CHAN A3 (5V): 0.000041
CHAN B0 (3.3V): -0.000490
CHAN B1 (3.15aV): 0.000004
CHAN B2 (3.15bV): -0.000039
CHAN B3 (GND): 0.000294
OPEN: -0.000311
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:28:32.620Z,1509427712.620 [BPC1](ERROR): Failed to receive battery data
2017-10-31T05:28:32.620Z,1509427712.620 [BPC1] Communications Fault, FailCount= 1
2017-10-31T05:28:32.620Z,1509427712.620 [BPC1](ERROR): Communications Fault
2017-10-31T05:28:32.643Z,1509427712.643 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T05:28:33.843Z,1509427713.843 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:28:33.843Z,1509427713.843 [BPC1] No Fault, FailCount= 1
2017-10-31T05:28:50.652Z,1509427730.652 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T05:28:50.652Z,1509427730.652 [Default:CheckIn:C.Wait] Stopped
2017-10-31T05:28:50.652Z,1509427730.652 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T05:28:50.652Z,1509427730.652 [Default:CheckIn:D] Running Loop=1
2017-10-31T05:28:51.053Z,1509427731.053 [Default:CheckIn:D] Stopped
2017-10-31T05:28:51.053Z,1509427731.053 [Default:CheckIn:E] Running Loop=1
2017-10-31T05:28:51.446Z,1509427731.446 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 411.722331 min 
2017-10-31T05:28:51.446Z,1509427731.446 [Default:CheckIn:E] Stopped
2017-10-31T05:28:51.446Z,1509427731.446 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T05:28:51.446Z,1509427731.446 [Default:CheckIn] Stopped
2017-10-31T05:28:51.446Z,1509427731.446 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T05:28:51.447Z,1509427731.447 [Default:CheckIn](INFO): Running loop #36
2017-10-31T05:28:51.447Z,1509427731.447 [Default:CheckIn] Running Loop=36
2017-10-31T05:28:51.451Z,1509427731.451 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T05:28:51.451Z,1509427731.451 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T05:28:51.471Z,1509427731.471 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:28:55.095Z,1509427735.095 [NAL9602](INFO): Powering up
2017-10-31T05:29:05.546Z,1509427745.546 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134292
CHAN A1 (24V): -0.004304
CHAN A2 (12V): -0.001812
CHAN A3 (5V): 0.000268
CHAN B0 (3.3V): -0.000233
CHAN B1 (3.15aV): 0.000161
CHAN B2 (3.15bV): -0.000432
CHAN B3 (GND): -0.000006
OPEN: -0.000389
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:29:06.268Z,1509427746.268 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:29:07.067Z,1509427747.067 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T05:29:07.067Z,1509427747.067 [NAL9602] Data Fault, FailCount= 5
2017-10-31T05:29:07.067Z,1509427747.067 [NAL9602](ERROR): Data Fault
2017-10-31T05:29:07.139Z,1509427747.139 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T05:29:07.144Z,1509427747.144 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T05:29:07.474Z,1509427747.474 [NAL9602](INFO): Powering down
2017-10-31T05:29:07.554Z,1509427747.554 [CBIT](INFO): Critical error at 20171031T052907
2017-10-31T05:29:35.515Z,1509427775.515 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:29:35.515Z,1509427775.515 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T05:29:35.515Z,1509427775.515 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:29:35.547Z,1509427775.547 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:29:35.944Z,1509427775.944 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:29:35.944Z,1509427775.944 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T05:29:36.320Z,1509427776.320 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:29:36.320Z,1509427776.320 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:29:36.320Z,1509427776.320 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:30:35.643Z,1509427835.643 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:30:46.477Z,1509427846.477 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002866
CHAN A1 (24V): -0.003450
CHAN A2 (12V): -0.002042
CHAN A3 (5V): -0.000000
CHAN B0 (3.3V): -0.000528
CHAN B1 (3.15aV): -0.000391
CHAN B2 (3.15bV): -0.000042
CHAN B3 (GND): -0.000253
OPEN: -0.000442
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:31:07.434Z,1509427867.434 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T05:31:07.434Z,1509427867.434 [NAL9602] No Fault, FailCount= 5
2017-10-31T05:31:07.720Z,1509427867.720 [NAL9602](INFO): Powering up NAL9602
2017-10-31T05:31:18.529Z,1509427878.529 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:32:10.073Z,1509427930.073 [PNI_TCM](ERROR): CRC does not match. Expected:0x46919 got:0x21973
2017-10-31T05:32:16.504Z,1509427936.504 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:32:19.655Z,1509427939.655 [PNI_TCM](ERROR): CRC does not match. Expected:0x10153 got:0x45020
2017-10-31T05:32:27.310Z,1509427947.310 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134238
CHAN A1 (24V): -0.004507
CHAN A2 (12V): -0.001686
CHAN A3 (5V): 0.000094
CHAN B0 (3.3V): -0.000101
CHAN B1 (3.15aV): -0.000137
CHAN B2 (3.15bV): -0.000002
CHAN B3 (GND): 0.000067
OPEN: -0.000442
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:32:36.485Z,1509427956.485 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:32:36.485Z,1509427956.485 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T05:32:36.485Z,1509427956.485 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:32:36.527Z,1509427956.527 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:32:36.909Z,1509427956.909 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:32:36.909Z,1509427956.909 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T05:32:37.273Z,1509427957.273 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:32:37.273Z,1509427957.273 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:32:37.274Z,1509427957.274 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:33:21.890Z,1509428001.890 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T05:33:51.459Z,1509428031.459 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T05:28:51.5Z
2017-10-31T05:33:51.459Z,1509428031.459 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T05:33:51.460Z,1509428031.460 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T05:33:55.625Z,1509428035.625 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171030T210256/Courier0180.lzma
2017-10-31T05:33:56.380Z,1509428036.380 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0180.lzma.bak
2017-10-31T05:33:56.380Z,1509428036.380 [DataOverHttps](INFO): SBD MOMSN=5178132
2017-10-31T05:34:00.534Z,1509428040.534 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:34:05.699Z,1509428045.699 [DataOverHttps](INFO): Sending 648 bytes from file Logs/20171030T210256/Express0181.lzma
2017-10-31T05:34:06.504Z,1509428046.504 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0181.lzma.bak
2017-10-31T05:34:06.504Z,1509428046.504 [DataOverHttps](INFO): SBD MOMSN=5178135
2017-10-31T05:34:07.010Z,1509428047.010 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T05:34:07.010Z,1509428047.010 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T05:34:07.010Z,1509428047.010 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T05:34:16.119Z,1509428056.119 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002153
CHAN A1 (24V): -0.004277
CHAN A2 (12V): -0.001995
CHAN A3 (5V): 0.000251
CHAN B0 (3.3V): 0.000123
CHAN B1 (3.15aV): -0.000155
CHAN B2 (3.15bV): -0.000700
CHAN B3 (GND): 0.000009
OPEN: -0.000474
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:34:16.452Z,1509428056.452 [PNI_TCM](ERROR): CRC does not match. Expected:0x27767 got:0x21974
2017-10-31T05:34:17.251Z,1509428057.251 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T05:34:26.062Z,1509428066.062 [PNI_TCM](ERROR): CRC does not match. Expected:0x48246 got:0x49070
2017-10-31T05:35:37.526Z,1509428137.526 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:35:37.526Z,1509428137.526 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T05:35:37.527Z,1509428137.527 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:35:37.552Z,1509428137.552 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:35:37.942Z,1509428137.942 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:35:37.942Z,1509428137.942 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T05:35:38.327Z,1509428138.327 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:35:38.328Z,1509428138.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:35:38.328Z,1509428138.328 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:35:46.339Z,1509428146.339 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:35:57.165Z,1509428157.165 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134822
CHAN A1 (24V): -0.003889
CHAN A2 (12V): -0.002133
CHAN A3 (5V): 0.000138
CHAN B0 (3.3V): 0.000197
CHAN B1 (3.15aV): -0.000537
CHAN B2 (3.15bV): 0.000269
CHAN B3 (GND): -0.000030
OPEN: -0.000067
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:36:21.426Z,1509428181.426 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T05:36:50.254Z,1509428210.254 [BPC1](ERROR): Failed to receive battery data
2017-10-31T05:36:50.254Z,1509428210.254 [BPC1] Communications Fault, FailCount= 1
2017-10-31T05:36:50.254Z,1509428210.254 [BPC1](ERROR): Communications Fault
2017-10-31T05:36:50.277Z,1509428210.277 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T05:36:51.488Z,1509428211.488 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:36:51.488Z,1509428211.488 [BPC1] No Fault, FailCount= 1
2017-10-31T05:36:52.216Z,1509428212.216 [NAL9602](INFO): Powering down
2017-10-31T05:37:14.055Z,1509428234.055 [PNI_TCM](ERROR): CRC does not match. Expected:0x51574 got:0x43033
2017-10-31T05:37:14.457Z,1509428234.457 [PNI_TCM](ERROR): CRC does not match. Expected:0x18165 got:0x43776
2017-10-31T05:37:20.459Z,1509428240.459 [PNI_TCM](ERROR): CRC does not match. Expected:0x4409 got:0x6978
2017-10-31T05:37:26.861Z,1509428246.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x28812 got:0x7360
2017-10-31T05:37:27.302Z,1509428247.302 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:37:28.457Z,1509428248.457 [PNI_TCM](ERROR): CRC does not match. Expected:0x11908 got:0x16981
2017-10-31T05:37:31.662Z,1509428251.662 [PNI_TCM](ERROR): CRC does not match. Expected:0x8130 got:0x6591
2017-10-31T05:37:33.265Z,1509428253.265 [PNI_TCM](ERROR): CRC does not match. Expected:0x10477 got:0x35916
2017-10-31T05:37:38.061Z,1509428258.061 [PNI_TCM](ERROR): CRC does not match. Expected:0x27782 got:0x44175
2017-10-31T05:37:38.117Z,1509428258.117 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003580
CHAN A1 (24V): -0.003059
CHAN A2 (12V): -0.002097
CHAN A3 (5V): 0.000101
CHAN B0 (3.3V): 0.000254
CHAN B1 (3.15aV): -0.000560
CHAN B2 (3.15bV): 0.000160
CHAN B3 (GND): 0.000126
OPEN: -0.000291
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:37:40.050Z,1509428260.050 [PNI_TCM](ERROR): CRC does not match. Expected:0x12882 got:0x36124
2017-10-31T05:37:42.858Z,1509428262.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T05:37:44.458Z,1509428264.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x15824 got:0x44114
2017-10-31T05:37:46.068Z,1509428266.068 [PNI_TCM](ERROR): CRC does not match. Expected:0x54506 got:0x44404
2017-10-31T05:37:49.273Z,1509428269.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x13396 got:0x45166
2017-10-31T05:37:54.055Z,1509428274.055 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16541
2017-10-31T05:37:54.461Z,1509428274.461 [PNI_TCM](ERROR): CRC does not match. Expected:0x25906 got:0x7490
2017-10-31T05:38:06.869Z,1509428286.869 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T05:38:08.468Z,1509428288.468 [PNI_TCM](ERROR): CRC does not match. Expected:0x62191 got:0x29212
2017-10-31T05:38:23.006Z,1509428303.006 [BPC1](ERROR): Failed to receive battery data
2017-10-31T05:38:23.006Z,1509428303.006 [BPC1] Communications Fault, FailCount= 1
2017-10-31T05:38:23.006Z,1509428303.006 [BPC1](ERROR): Communications Fault
2017-10-31T05:38:23.097Z,1509428303.097 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T05:38:24.236Z,1509428304.236 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:38:24.236Z,1509428304.236 [BPC1] No Fault, FailCount= 1
2017-10-31T05:38:38.617Z,1509428318.617 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:38:38.618Z,1509428318.618 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T05:38:38.618Z,1509428318.618 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:38:38.655Z,1509428318.655 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:38:39.027Z,1509428319.027 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:38:39.027Z,1509428319.027 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T05:38:39.453Z,1509428319.453 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:38:39.453Z,1509428319.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:38:39.453Z,1509428319.453 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:39:07.842Z,1509428347.842 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T05:39:07.842Z,1509428347.842 [Default:CheckIn:C.Wait] Stopped
2017-10-31T05:39:07.842Z,1509428347.842 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T05:39:07.843Z,1509428347.843 [Default:CheckIn:D] Running Loop=1
2017-10-31T05:39:08.212Z,1509428348.212 [Default:CheckIn:D] Stopped
2017-10-31T05:39:08.212Z,1509428348.212 [Default:CheckIn:E] Running Loop=1
2017-10-31T05:39:08.239Z,1509428348.239 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:39:08.644Z,1509428348.644 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 422.008301 min 
2017-10-31T05:39:08.644Z,1509428348.644 [Default:CheckIn:E] Stopped
2017-10-31T05:39:08.644Z,1509428348.644 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T05:39:08.644Z,1509428348.644 [Default:CheckIn] Stopped
2017-10-31T05:39:08.645Z,1509428348.645 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T05:39:08.645Z,1509428348.645 [Default:CheckIn](INFO): Running loop #37
2017-10-31T05:39:08.645Z,1509428348.645 [Default:CheckIn] Running Loop=37
2017-10-31T05:39:08.645Z,1509428348.645 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T05:39:08.645Z,1509428348.645 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T05:39:12.012Z,1509428352.012 [NAL9602](INFO): Powering up
2017-10-31T05:39:21.295Z,1509428361.295 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134119
CHAN A1 (24V): -0.003910
CHAN A2 (12V): -0.001962
CHAN A3 (5V): 0.000053
CHAN B0 (3.3V): -0.000296
CHAN B1 (3.15aV): 0.000037
CHAN B2 (3.15bV): 0.000040
CHAN B3 (GND): -0.000060
OPEN: -0.000379
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:39:22.824Z,1509428362.824 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:39:46.067Z,1509428386.067 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16541
2017-10-31T05:39:48.463Z,1509428388.463 [BPC1](ERROR): Failed to parse message.
2017-10-31T05:39:48.463Z,1509428388.463 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T05:39:48.463Z,1509428388.463 [BPC1] Data Fault, FailCount= 1
2017-10-31T05:39:48.463Z,1509428388.463 [BPC1](ERROR): Data Fault
2017-10-31T05:39:48.524Z,1509428388.524 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T05:39:49.690Z,1509428389.690 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:39:49.690Z,1509428389.690 [BPC1] No Fault, FailCount= 1
2017-10-31T05:39:54.818Z,1509428394.818 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T05:39:54.896Z,1509428394.896 [NAL9602](FAULT): received: 
+CSQ:0

OK16, 2, 0, 0, 0

OK
2017-10-31T05:39:54.896Z,1509428394.896 [NAL9602] Data Fault, FailCount= 1
2017-10-31T05:39:54.896Z,1509428394.896 [NAL9602](ERROR): Data Fault
2017-10-31T05:39:54.965Z,1509428394.965 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T05:39:55.218Z,1509428395.218 [NAL9602](INFO): Powering down
2017-10-31T05:39:56.087Z,1509428396.087 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T05:39:56.087Z,1509428396.087 [NAL9602] No Fault, FailCount= 1
2017-10-31T05:40:25.458Z,1509428425.458 [NAL9602](INFO): Powering up NAL9602
2017-10-31T05:40:36.660Z,1509428436.660 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:40:51.563Z,1509428451.563 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:41:02.321Z,1509428462.321 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002536
CHAN A1 (24V): -0.004076
CHAN A2 (12V): -0.002321
CHAN A3 (5V): 0.000362
CHAN B0 (3.3V): 0.000099
CHAN B1 (3.15aV): -0.000143
CHAN B2 (3.15bV): 0.000149
CHAN B3 (GND): 0.000305
OPEN: -0.000471
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:41:15.682Z,1509428475.682 [PNI_TCM](ERROR): CRC does not match. Expected:0x15590 got:0x44945
2017-10-31T05:41:22.075Z,1509428482.075 [PNI_TCM](ERROR): CRC does not match. Expected:0x36463 got:0x7490
2017-10-31T05:41:38.080Z,1509428498.080 [PNI_TCM](ERROR): CRC does not match. Expected:0x54483 got:0x45509
2017-10-31T05:41:39.701Z,1509428499.701 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:41:39.701Z,1509428499.701 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T05:41:39.701Z,1509428499.701 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:41:39.738Z,1509428499.738 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:41:39.738Z,1509428499.738 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:41:41.267Z,1509428501.267 [PNI_TCM](ERROR): CRC does not match. Expected:0x6553 got:0x49072
2017-10-31T05:41:42.869Z,1509428502.869 [PNI_TCM](ERROR): CRC does not match. Expected:0x9295 got:0x22729
2017-10-31T05:41:46.069Z,1509428506.069 [PNI_TCM](ERROR): CRC does not match. Expected:0x52246 got:0x44902
2017-10-31T05:41:47.678Z,1509428507.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x40555 got:0x44333
2017-10-31T05:41:52.491Z,1509428512.491 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T05:41:55.678Z,1509428515.678 [PNI_TCM](ERROR): CRC does not match. Expected:0x50756 got:0x16849
2017-10-31T05:41:57.269Z,1509428517.269 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T05:42:02.079Z,1509428522.079 [PNI_TCM](ERROR): CRC does not match. Expected:0x29786 got:0x43712
2017-10-31T05:42:06.867Z,1509428526.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x52625 got:0x6591
2017-10-31T05:42:08.469Z,1509428528.469 [PNI_TCM](ERROR): CRC does not match. Expected:0x57826 got:0x7360
2017-10-31T05:42:32.411Z,1509428552.411 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:42:43.201Z,1509428563.201 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133471
CHAN A1 (24V): -0.004386
CHAN A2 (12V): -0.002262
CHAN A3 (5V): 0.000526
CHAN B0 (3.3V): -0.000148
CHAN B1 (3.15aV): -0.000110
CHAN B2 (3.15bV): 0.000048
CHAN B3 (GND): 0.000106
OPEN: -0.000539
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:43:22.017Z,1509428602.017 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T05:43:33.999Z,1509428613.999 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T05:43:33.999Z,1509428613.999 [BPC1] Data Fault, FailCount= 1
2017-10-31T05:43:33.999Z,1509428613.999 [BPC1](ERROR): Data Fault
2017-10-31T05:43:34.022Z,1509428614.022 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T05:43:35.229Z,1509428615.229 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:43:35.229Z,1509428615.229 [BPC1] No Fault, FailCount= 1
2017-10-31T05:43:59.181Z,1509428639.181 [BPC1](ERROR): Failed to receive battery data
2017-10-31T05:43:59.181Z,1509428639.181 [BPC1] Communications Fault, FailCount= 2
2017-10-31T05:43:59.181Z,1509428639.181 [BPC1](ERROR): Communications Fault
2017-10-31T05:43:59.251Z,1509428639.251 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T05:44:00.420Z,1509428640.420 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:44:00.420Z,1509428640.420 [BPC1] No Fault, FailCount= 2
2017-10-31T05:44:08.791Z,1509428648.791 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T05:39:08.6Z
2017-10-31T05:44:08.791Z,1509428648.791 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T05:44:08.792Z,1509428648.792 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T05:44:12.981Z,1509428652.981 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0184.lzma
2017-10-31T05:44:13.400Z,1509428653.400 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:44:13.724Z,1509428653.724 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0184.lzma.bak
2017-10-31T05:44:13.724Z,1509428653.724 [DataOverHttps](INFO): SBD MOMSN=5178152
2017-10-31T05:44:23.293Z,1509428663.293 [DataOverHttps](INFO): Sending 713 bytes from file Logs/20171030T210256/Express0185.lzma
2017-10-31T05:44:24.097Z,1509428664.097 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0185.lzma.bak
2017-10-31T05:44:24.097Z,1509428664.097 [DataOverHttps](INFO): SBD MOMSN=5178154
2017-10-31T05:44:24.598Z,1509428664.598 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T05:44:24.598Z,1509428664.598 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T05:44:24.598Z,1509428664.598 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T05:44:28.477Z,1509428668.477 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T05:44:32.704Z,1509428672.704 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.001644
CHAN A1 (24V): -0.004045
CHAN A2 (12V): -0.001991
CHAN A3 (5V): 0.000238
CHAN B0 (3.3V): -0.000514
CHAN B1 (3.15aV): 0.000034
CHAN B2 (3.15bV): -0.000644
CHAN B3 (GND): 0.000268
OPEN: -0.000530
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:44:58.641Z,1509428698.641 [NAL9602](INFO): Powering down
2017-10-31T05:45:29.261Z,1509428729.261 [PNI_TCM](ERROR): CRC does not match. Expected:0x25603 got:0x1857
2017-10-31T05:46:02.883Z,1509428762.883 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:46:13.700Z,1509428773.700 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003637
CHAN A1 (24V): -0.003417
CHAN A2 (12V): -0.002418
CHAN A3 (5V): 0.000161
CHAN B0 (3.3V): 0.000064
CHAN B1 (3.15aV): 0.000537
CHAN B2 (3.15bV): -0.000485
CHAN B3 (GND): -0.000132
OPEN: -0.000545
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:47:43.874Z,1509428863.874 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:47:54.679Z,1509428874.679 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134848
CHAN A1 (24V): -0.003933
CHAN A2 (12V): -0.002210
CHAN A3 (5V): -0.000064
CHAN B0 (3.3V): -0.000181
CHAN B1 (3.15aV): -0.000351
CHAN B2 (3.15bV): -0.000410
CHAN B3 (GND): -0.000036
OPEN: -0.000344
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:48:08.616Z,1509428888.616 [BPC1](ERROR): Failed to receive battery data
2017-10-31T05:48:08.616Z,1509428888.616 [BPC1] Communications Fault, FailCount= 1
2017-10-31T05:48:08.616Z,1509428888.616 [BPC1](ERROR): Communications Fault
2017-10-31T05:48:08.659Z,1509428888.659 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T05:48:09.857Z,1509428889.857 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:48:09.857Z,1509428889.857 [BPC1] No Fault, FailCount= 1
2017-10-31T05:49:24.779Z,1509428964.779 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:49:25.220Z,1509428965.220 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T05:49:25.220Z,1509428965.220 [Default:CheckIn:C.Wait] Stopped
2017-10-31T05:49:25.220Z,1509428965.220 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T05:49:25.220Z,1509428965.220 [Default:CheckIn:D] Running Loop=1
2017-10-31T05:49:25.582Z,1509428965.582 [Default:CheckIn:D] Stopped
2017-10-31T05:49:25.582Z,1509428965.582 [Default:CheckIn:E] Running Loop=1
2017-10-31T05:49:25.989Z,1509428965.989 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 432.297786 min 
2017-10-31T05:49:25.989Z,1509428965.989 [Default:CheckIn:E] Stopped
2017-10-31T05:49:25.989Z,1509428965.989 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T05:49:25.989Z,1509428965.989 [Default:CheckIn] Stopped
2017-10-31T05:49:25.990Z,1509428965.990 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T05:49:25.990Z,1509428965.990 [Default:CheckIn](INFO): Running loop #38
2017-10-31T05:49:25.990Z,1509428965.990 [Default:CheckIn] Running Loop=38
2017-10-31T05:49:25.990Z,1509428965.990 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T05:49:25.990Z,1509428965.990 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T05:49:29.380Z,1509428969.380 [NAL9602](INFO): Powering up
2017-10-31T05:49:38.646Z,1509428978.646 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002947
CHAN A1 (24V): -0.004385
CHAN A2 (12V): -0.002039
CHAN A3 (5V): -0.000262
CHAN B0 (3.3V): -0.000424
CHAN B1 (3.15aV): -0.000452
CHAN B2 (3.15bV): -0.000534
CHAN B3 (GND): 0.000227
OPEN: -0.000677
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:49:40.195Z,1509428980.195 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:49:40.984Z,1509428980.984 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T05:49:40.984Z,1509428980.984 [NAL9602] Data Fault, FailCount= 2
2017-10-31T05:49:40.984Z,1509428980.984 [NAL9602](ERROR): Data Fault
2017-10-31T05:49:41.068Z,1509428981.068 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T05:49:41.401Z,1509428981.401 [NAL9602](INFO): Powering down
2017-10-31T05:49:42.239Z,1509428982.239 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T05:49:42.239Z,1509428982.239 [NAL9602] No Fault, FailCount= 2
2017-10-31T05:50:11.785Z,1509429011.785 [NAL9602](INFO): Powering up NAL9602
2017-10-31T05:50:22.598Z,1509429022.598 [NAL9602](INFO): NAL9602 initialized
2017-10-31T05:50:38.066Z,1509429038.066 [PNI_TCM](ERROR): CRC does not match. Expected:0x24116 got:0x61799
2017-10-31T05:50:42.074Z,1509429042.074 [PNI_TCM](ERROR): CRC does not match. Expected:0x23789 got:0x6335
2017-10-31T05:50:42.477Z,1509429042.477 [PNI_TCM](ERROR): CRC does not match. Expected:0x53770 got:0x16981
2017-10-31T05:50:46.885Z,1509429046.885 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T05:50:56.495Z,1509429056.495 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T05:51:07.688Z,1509429067.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x39245 got:0x0
2017-10-31T05:51:08.906Z,1509429068.906 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:51:12.496Z,1509429072.496 [PNI_TCM](ERROR): CRC does not match. Expected:0x27868 got:0x16810
2017-10-31T05:51:17.289Z,1509429077.289 [PNI_TCM](ERROR): CRC does not match. Expected:0x12829 got:0x44396
2017-10-31T05:51:19.707Z,1509429079.707 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134113
CHAN A1 (24V): -0.004076
CHAN A2 (12V): -0.002279
CHAN A3 (5V): 0.000239
CHAN B0 (3.3V): -0.000926
CHAN B1 (3.15aV): -0.000132
CHAN B2 (3.15bV): 0.000117
CHAN B3 (GND): 0.000294
OPEN: -0.000227
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:51:24.074Z,1509429084.074 [PNI_TCM](ERROR): CRC does not match. Expected:0x58115 got:0x40404
2017-10-31T05:51:26.078Z,1509429086.078 [PNI_TCM](ERROR): CRC does not match. Expected:0x37466 got:0x21996
2017-10-31T05:52:49.790Z,1509429169.790 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:53:00.617Z,1509429180.617 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002657
CHAN A1 (24V): -0.004265
CHAN A2 (12V): -0.002142
CHAN A3 (5V): 0.000818
CHAN B0 (3.3V): -0.000031
CHAN B1 (3.15aV): -0.000372
CHAN B2 (3.15bV): -0.000369
CHAN B3 (GND): -0.000133
OPEN: -0.000607
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:53:22.246Z,1509429202.246 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T05:53:45.633Z,1509429225.633 [BPC1](ERROR): Failed to receive battery data
2017-10-31T05:53:45.633Z,1509429225.633 [BPC1] Communications Fault, FailCount= 1
2017-10-31T05:53:45.633Z,1509429225.633 [BPC1](ERROR): Communications Fault
2017-10-31T05:53:45.655Z,1509429225.655 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T05:53:46.855Z,1509429226.855 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T05:53:46.855Z,1509429226.855 [BPC1] No Fault, FailCount= 1
2017-10-31T05:54:26.088Z,1509429266.088 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T05:49:25.0Z
2017-10-31T05:54:26.088Z,1509429266.088 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T05:54:26.089Z,1509429266.089 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T05:54:30.673Z,1509429270.673 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:54:30.725Z,1509429270.725 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0188.lzma
2017-10-31T05:54:31.497Z,1509429271.497 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0188.lzma.bak
2017-10-31T05:54:31.497Z,1509429271.497 [DataOverHttps](INFO): SBD MOMSN=5178172
2017-10-31T05:54:37.314Z,1509429277.314 [NAL9602](INFO): SBD MO Status=2, MOMSN=3316, MT Status=2, MTMSN=0
2017-10-31T05:54:37.314Z,1509429277.314 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T05:54:40.789Z,1509429280.789 [DataOverHttps](INFO): Sending 638 bytes from file Logs/20171030T210256/Express0189.lzma
2017-10-31T05:54:41.593Z,1509429281.593 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0189.lzma.bak
2017-10-31T05:54:41.593Z,1509429281.593 [DataOverHttps](INFO): SBD MOMSN=5178174
2017-10-31T05:54:42.092Z,1509429282.092 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T05:54:42.092Z,1509429282.092 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T05:54:42.093Z,1509429282.093 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T05:54:48.958Z,1509429288.958 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133609
CHAN A1 (24V): -0.004451
CHAN A2 (12V): -0.002691
CHAN A3 (5V): 0.000254
CHAN B0 (3.3V): -0.000422
CHAN B1 (3.15aV): -0.000850
CHAN B2 (3.15bV): 0.000072
CHAN B3 (GND): -0.000292
OPEN: -0.000526
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:54:57.702Z,1509429297.702 [NAL9602](INFO): SBD MO Status=0, MOMSN=3316, MT Status=0, MTMSN=0
2017-10-31T05:54:57.703Z,1509429297.703 [NAL9602](INFO): No messages in MT queue
2017-10-31T05:55:28.497Z,1509429328.497 [NAL9602](INFO): Powering down
2017-10-31T05:56:19.120Z,1509429379.120 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:56:29.926Z,1509429389.926 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003451
CHAN A1 (24V): -0.003761
CHAN A2 (12V): -0.001785
CHAN A3 (5V): 0.000647
CHAN B0 (3.3V): 0.000154
CHAN B1 (3.15aV): -0.000343
CHAN B2 (3.15bV): -0.000319
CHAN B3 (GND): -0.000035
OPEN: -0.000595
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:56:39.920Z,1509429399.920 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:56:39.920Z,1509429399.920 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T05:56:40.306Z,1509429400.306 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:56:40.306Z,1509429400.306 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:56:40.307Z,1509429400.307 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:58:00.000Z,1509429480.000 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:58:10.843Z,1509429490.843 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135018
CHAN A1 (24V): -0.003412
CHAN A2 (12V): -0.002136
CHAN A3 (5V): 0.000632
CHAN B0 (3.3V): -0.000162
CHAN B1 (3.15aV): 0.000233
CHAN B2 (3.15bV): 0.000043
CHAN B3 (GND): 0.000165
OPEN: -0.000606
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:59:40.368Z,1509429580.368 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T05:59:40.368Z,1509429580.368 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T05:59:40.368Z,1509429580.368 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T05:59:40.382Z,1509429580.382 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T05:59:40.792Z,1509429580.792 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T05:59:40.792Z,1509429580.792 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T05:59:41.166Z,1509429581.166 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T05:59:41.167Z,1509429581.167 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T05:59:41.167Z,1509429581.167 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T05:59:41.180Z,1509429581.180 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T05:59:42.755Z,1509429582.755 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T05:59:42.756Z,1509429582.756 [Default:CheckIn:C.Wait] Stopped
2017-10-31T05:59:42.756Z,1509429582.756 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T05:59:42.756Z,1509429582.756 [Default:CheckIn:D] Running Loop=1
2017-10-31T05:59:43.156Z,1509429583.156 [Default:CheckIn:D] Stopped
2017-10-31T05:59:43.156Z,1509429583.156 [Default:CheckIn:E] Running Loop=1
2017-10-31T05:59:43.587Z,1509429583.587 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 442.590690 min 
2017-10-31T05:59:43.588Z,1509429583.588 [Default:CheckIn:E] Stopped
2017-10-31T05:59:43.588Z,1509429583.588 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T05:59:43.588Z,1509429583.588 [Default:CheckIn] Stopped
2017-10-31T05:59:43.588Z,1509429583.588 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T05:59:43.588Z,1509429583.588 [Default:CheckIn](INFO): Running loop #39
2017-10-31T05:59:43.588Z,1509429583.588 [Default:CheckIn] Running Loop=39
2017-10-31T05:59:43.588Z,1509429583.588 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T05:59:43.589Z,1509429583.589 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T05:59:46.949Z,1509429586.949 [NAL9602](INFO): Powering up
2017-10-31T05:59:55.035Z,1509429595.035 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003275
CHAN A1 (24V): -0.003941
CHAN A2 (12V): -0.002312
CHAN A3 (5V): 0.000298
CHAN B0 (3.3V): 0.000152
CHAN B1 (3.15aV): 0.000363
CHAN B2 (3.15bV): 0.000124
CHAN B3 (GND): 0.000067
OPEN: -0.000620
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T05:59:57.755Z,1509429597.755 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:01:25.294Z,1509429685.294 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:01:36.089Z,1509429696.089 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002731
CHAN A1 (24V): -0.003412
CHAN A2 (12V): -0.002369
CHAN A3 (5V): -0.000079
CHAN B0 (3.3V): -0.000451
CHAN B1 (3.15aV): 0.000278
CHAN B2 (3.15bV): -0.000457
CHAN B3 (GND): 0.000173
OPEN: -0.000520
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:02:41.516Z,1509429761.516 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:02:41.516Z,1509429761.516 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T06:02:41.516Z,1509429761.516 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:02:41.530Z,1509429761.530 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:02:41.938Z,1509429761.938 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:02:41.938Z,1509429761.938 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T06:02:42.329Z,1509429762.329 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:02:42.329Z,1509429762.329 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:02:42.330Z,1509429762.330 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:03:06.093Z,1509429786.093 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:03:16.915Z,1509429796.915 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003183
CHAN A1 (24V): 4.657929
CHAN A2 (12V): -0.002336
CHAN A3 (5V): 0.000297
CHAN B0 (3.3V): -0.000107
CHAN B1 (3.15aV): -0.000042
CHAN B2 (3.15bV): 0.000136
CHAN B3 (GND): 0.000193
OPEN: -0.000374
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:03:22.511Z,1509429802.511 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T06:04:43.861Z,1509429883.861 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T05:59:43.6Z
2017-10-31T06:04:43.861Z,1509429883.861 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T06:04:43.861Z,1509429883.861 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T06:04:48.123Z,1509429888.123 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:04:48.162Z,1509429888.162 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0192.lzma
2017-10-31T06:04:48.937Z,1509429888.937 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0192.lzma.bak
2017-10-31T06:04:48.937Z,1509429888.937 [DataOverHttps](INFO): SBD MOMSN=5178192
2017-10-31T06:04:58.244Z,1509429898.244 [DataOverHttps](INFO): Sending 556 bytes from file Logs/20171030T210256/Express0193.lzma
2017-10-31T06:04:59.049Z,1509429899.049 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0193.lzma.bak
2017-10-31T06:04:59.049Z,1509429899.049 [DataOverHttps](INFO): SBD MOMSN=5178194
2017-10-31T06:04:59.530Z,1509429899.530 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T06:04:59.530Z,1509429899.530 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T06:04:59.530Z,1509429899.530 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T06:05:03.196Z,1509429903.196 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T06:05:06.300Z,1509429906.300 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133754
CHAN A1 (24V): -0.004697
CHAN A2 (12V): -0.002179
CHAN A3 (5V): 0.000091
CHAN B0 (3.3V): -0.000165
CHAN B1 (3.15aV): 0.000220
CHAN B2 (3.15bV): -0.000410
CHAN B3 (GND): 0.000029
OPEN: -0.000336
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:05:33.412Z,1509429933.412 [NAL9602](INFO): Powering down
2017-10-31T06:05:42.672Z,1509429942.672 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:05:42.672Z,1509429942.672 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T06:05:42.672Z,1509429942.672 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:05:42.703Z,1509429942.703 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:05:43.078Z,1509429943.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:05:43.078Z,1509429943.078 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T06:05:43.461Z,1509429943.461 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:05:43.462Z,1509429943.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:05:43.462Z,1509429943.462 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:06:36.513Z,1509429996.513 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:06:47.280Z,1509430007.280 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134618
CHAN A1 (24V): -0.003242
CHAN A2 (12V): -0.002424
CHAN A3 (5V): 0.000594
CHAN B0 (3.3V): -0.000522
CHAN B1 (3.15aV): 0.000237
CHAN B2 (3.15bV): 0.000192
CHAN B3 (GND): 0.000274
OPEN: -0.000183
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:06:54.847Z,1509430014.847 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T06:06:54.847Z,1509430014.847 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:06:54.847Z,1509430014.847 [BPC1](ERROR): Data Fault
2017-10-31T06:06:54.922Z,1509430014.922 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:06:56.092Z,1509430016.092 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:06:56.092Z,1509430016.092 [BPC1] No Fault, FailCount= 1
2017-10-31T06:08:17.664Z,1509430097.664 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:08:28.482Z,1509430108.482 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002851
CHAN A1 (24V): -0.003465
CHAN A2 (12V): -0.002288
CHAN A3 (5V): 0.000600
CHAN B0 (3.3V): 0.000152
CHAN B1 (3.15aV): -0.000555
CHAN B2 (3.15bV): -0.000551
CHAN B3 (GND): 0.000064
OPEN: -0.000306
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:08:43.630Z,1509430123.630 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:08:43.630Z,1509430123.630 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T06:08:43.630Z,1509430123.630 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:08:43.664Z,1509430123.664 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:08:44.137Z,1509430124.137 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:08:44.138Z,1509430124.138 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T06:08:44.440Z,1509430124.440 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:08:44.440Z,1509430124.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:08:44.441Z,1509430124.441 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:09:58.669Z,1509430198.669 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:10:00.259Z,1509430200.259 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T06:10:00.259Z,1509430200.259 [Default:CheckIn:C.Wait] Stopped
2017-10-31T06:10:00.260Z,1509430200.260 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T06:10:00.260Z,1509430200.260 [Default:CheckIn:D] Running Loop=1
2017-10-31T06:10:00.658Z,1509430200.658 [Default:CheckIn:D] Stopped
2017-10-31T06:10:00.658Z,1509430200.658 [Default:CheckIn:E] Running Loop=1
2017-10-31T06:10:01.064Z,1509430201.064 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 452.882389 min 
2017-10-31T06:10:01.064Z,1509430201.064 [Default:CheckIn:E] Stopped
2017-10-31T06:10:01.064Z,1509430201.064 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T06:10:01.064Z,1509430201.064 [Default:CheckIn] Stopped
2017-10-31T06:10:01.065Z,1509430201.065 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T06:10:01.065Z,1509430201.065 [Default:CheckIn](INFO): Running loop #40
2017-10-31T06:10:01.065Z,1509430201.065 [Default:CheckIn] Running Loop=40
2017-10-31T06:10:01.065Z,1509430201.065 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T06:10:01.065Z,1509430201.065 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T06:10:04.421Z,1509430204.421 [NAL9602](INFO): Powering up
2017-10-31T06:10:12.515Z,1509430212.515 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134412
CHAN A1 (24V): -0.004083
CHAN A2 (12V): -0.001838
CHAN A3 (5V): 0.000377
CHAN B0 (3.3V): 0.000382
CHAN B1 (3.15aV): -0.000507
CHAN B2 (3.15bV): -0.000428
CHAN B3 (GND): -0.000083
OPEN: -0.000710
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:10:15.232Z,1509430215.232 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:10:16.032Z,1509430216.032 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T06:10:16.032Z,1509430216.032 [NAL9602] Data Fault, FailCount= 1
2017-10-31T06:10:16.032Z,1509430216.032 [NAL9602](ERROR): Data Fault
2017-10-31T06:10:16.130Z,1509430216.130 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T06:10:16.425Z,1509430216.425 [NAL9602](INFO): Powering down
2017-10-31T06:10:17.299Z,1509430217.299 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T06:10:17.299Z,1509430217.299 [NAL9602] No Fault, FailCount= 1
2017-10-31T06:10:46.826Z,1509430246.826 [NAL9602](INFO): Powering up NAL9602
2017-10-31T06:10:57.627Z,1509430257.627 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:11:42.628Z,1509430302.628 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:11:44.628Z,1509430304.628 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:11:44.628Z,1509430304.628 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T06:11:44.628Z,1509430304.628 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:11:44.661Z,1509430304.661 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:11:45.059Z,1509430305.059 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:11:45.059Z,1509430305.059 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T06:11:45.438Z,1509430305.438 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:11:45.438Z,1509430305.438 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:11:45.439Z,1509430305.439 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:11:53.458Z,1509430313.458 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002875
CHAN A1 (24V): -0.004919
CHAN A2 (12V): -0.002435
CHAN A3 (5V): 0.000185
CHAN B0 (3.3V): 0.000054
CHAN B1 (3.15aV): 0.000061
CHAN B2 (3.15bV): -0.000292
CHAN B3 (GND): 0.000068
OPEN: -0.000520
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:13:22.749Z,1509430402.749 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T06:13:23.516Z,1509430403.516 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:13:34.349Z,1509430414.349 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134418
CHAN A1 (24V): -0.004145
CHAN A2 (12V): -0.002094
CHAN A3 (5V): 0.000108
CHAN B0 (3.3V): 0.000294
CHAN B1 (3.15aV): 0.000433
CHAN B2 (3.15bV): 0.000051
CHAN B3 (GND): 0.000183
OPEN: -0.000488
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:13:52.240Z,1509430432.240 [NAL9602](INFO): SBD MO Status=2, MOMSN=3317, MT Status=2, MTMSN=0
2017-10-31T06:13:52.240Z,1509430432.240 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:14:22.452Z,1509430462.452 [NAL9602](INFO): SBD MO Status=2, MOMSN=3317, MT Status=2, MTMSN=0
2017-10-31T06:14:22.452Z,1509430462.452 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:14:45.707Z,1509430485.707 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:14:45.707Z,1509430485.707 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T06:14:45.707Z,1509430485.707 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:14:45.743Z,1509430485.743 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:14:46.126Z,1509430486.126 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:14:46.126Z,1509430486.126 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T06:14:46.506Z,1509430486.506 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:14:46.507Z,1509430486.507 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:14:46.507Z,1509430486.507 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:15:01.312Z,1509430501.312 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T06:10:01.1Z
2017-10-31T06:15:01.312Z,1509430501.312 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T06:15:01.312Z,1509430501.312 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T06:15:05.379Z,1509430505.379 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:15:05.453Z,1509430505.453 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0196.lzma
2017-10-31T06:15:06.193Z,1509430506.193 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0196.lzma.bak
2017-10-31T06:15:06.193Z,1509430506.193 [DataOverHttps](INFO): SBD MOMSN=5178209
2017-10-31T06:15:12.102Z,1509430512.102 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T06:15:12.102Z,1509430512.102 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:15:12.102Z,1509430512.102 [BPC1](ERROR): Data Fault
2017-10-31T06:15:12.126Z,1509430512.126 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:15:15.573Z,1509430515.573 [DataOverHttps](INFO): Sending 648 bytes from file Logs/20171030T210256/Express0197.lzma
2017-10-31T06:15:16.045Z,1509430516.045 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:15:16.045Z,1509430516.045 [BPC1] No Fault, FailCount= 1
2017-10-31T06:15:16.377Z,1509430516.377 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0197.lzma.bak
2017-10-31T06:15:16.377Z,1509430516.377 [DataOverHttps](INFO): SBD MOMSN=5178211
2017-10-31T06:15:16.842Z,1509430516.842 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T06:15:16.842Z,1509430516.842 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T06:15:16.842Z,1509430516.842 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T06:15:23.520Z,1509430523.520 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002276
CHAN A1 (24V): -0.004239
CHAN A2 (12V): -0.002148
CHAN A3 (5V): 0.000006
CHAN B0 (3.3V): 0.000226
CHAN B1 (3.15aV): 0.000289
CHAN B2 (3.15bV): -0.000988
CHAN B3 (GND): 0.000170
OPEN: -0.000513
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:15:27.856Z,1509430527.856 [NAL9602](INFO): SBD MO Status=2, MOMSN=3317, MT Status=2, MTMSN=0
2017-10-31T06:15:27.857Z,1509430527.857 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:16:02.652Z,1509430562.652 [NAL9602](INFO): SBD MO Status=2, MOMSN=3317, MT Status=2, MTMSN=0
2017-10-31T06:16:02.652Z,1509430562.652 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:16:03.050Z,1509430563.050 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T06:16:30.958Z,1509430590.958 [PNI_TCM](ERROR): CRC does not match. Expected:0x9195 got:0x43584
2017-10-31T06:16:33.728Z,1509430593.728 [NAL9602](INFO): Powering down
2017-10-31T06:16:53.775Z,1509430613.775 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:17:04.608Z,1509430624.608 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003978
CHAN A1 (24V): -0.003280
CHAN A2 (12V): -0.002283
CHAN A3 (5V): 0.000185
CHAN B0 (3.3V): -0.000175
CHAN B1 (3.15aV): 0.000340
CHAN B2 (3.15bV): -0.000223
CHAN B3 (GND): 0.000112
OPEN: -0.000400
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:17:26.485Z,1509430646.485 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T06:17:26.485Z,1509430646.485 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:17:26.485Z,1509430646.485 [BPC1](ERROR): Data Fault
2017-10-31T06:17:26.533Z,1509430646.533 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:17:27.721Z,1509430647.721 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:17:27.722Z,1509430647.722 [BPC1] No Fault, FailCount= 1
2017-10-31T06:17:46.906Z,1509430666.906 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:17:46.906Z,1509430666.906 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T06:17:46.906Z,1509430666.906 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:17:46.942Z,1509430666.942 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:17:47.303Z,1509430667.303 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:17:47.303Z,1509430667.303 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T06:17:47.703Z,1509430667.703 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:17:47.703Z,1509430667.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:17:47.704Z,1509430667.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:18:34.663Z,1509430714.663 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:18:45.490Z,1509430725.490 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134375
CHAN A1 (24V): -0.003421
CHAN A2 (12V): -0.001664
CHAN A3 (5V): 0.000488
CHAN B0 (3.3V): -0.000254
CHAN B1 (3.15aV): -0.000189
CHAN B2 (3.15bV): -0.000252
CHAN B3 (GND): -0.000569
OPEN: -0.000273
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:19:15.839Z,1509430755.839 [BPC1](ERROR): Failed to parse message.
2017-10-31T06:19:15.839Z,1509430755.839 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T06:19:15.839Z,1509430755.839 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:19:15.839Z,1509430755.839 [BPC1](ERROR): Data Fault
2017-10-31T06:19:15.890Z,1509430755.890 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:19:17.078Z,1509430757.078 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:19:17.078Z,1509430757.078 [BPC1] No Fault, FailCount= 1
2017-10-31T06:20:15.700Z,1509430815.700 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:20:17.285Z,1509430817.285 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T06:20:17.285Z,1509430817.285 [Default:CheckIn:C.Wait] Stopped
2017-10-31T06:20:17.285Z,1509430817.285 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T06:20:17.286Z,1509430817.286 [Default:CheckIn:D] Running Loop=1
2017-10-31T06:20:17.685Z,1509430817.685 [Default:CheckIn:D] Stopped
2017-10-31T06:20:17.685Z,1509430817.685 [Default:CheckIn:E] Running Loop=1
2017-10-31T06:20:18.082Z,1509430818.082 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 463.166178 min 
2017-10-31T06:20:18.082Z,1509430818.082 [Default:CheckIn:E] Stopped
2017-10-31T06:20:18.082Z,1509430818.082 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T06:20:18.082Z,1509430818.082 [Default:CheckIn] Stopped
2017-10-31T06:20:18.083Z,1509430818.083 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T06:20:18.083Z,1509430818.083 [Default:CheckIn](INFO): Running loop #41
2017-10-31T06:20:18.083Z,1509430818.083 [Default:CheckIn] Running Loop=41
2017-10-31T06:20:18.083Z,1509430818.083 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T06:20:18.083Z,1509430818.083 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T06:20:21.793Z,1509430821.793 [NAL9602](INFO): Powering up
2017-10-31T06:20:28.915Z,1509430828.915 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003880
CHAN A1 (24V): -0.004007
CHAN A2 (12V): -0.002598
CHAN A3 (5V): -0.000092
CHAN B0 (3.3V): 0.000325
CHAN B1 (3.15aV): -0.000528
CHAN B2 (3.15bV): -0.000128
CHAN B3 (GND): -0.000051
OPEN: -0.000624
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:20:32.824Z,1509430832.824 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:20:42.874Z,1509430842.874 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T06:20:42.874Z,1509430842.874 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:20:42.874Z,1509430842.874 [BPC1](ERROR): Data Fault
2017-10-31T06:20:42.897Z,1509430842.897 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:20:44.111Z,1509430844.111 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:20:44.112Z,1509430844.112 [BPC1] No Fault, FailCount= 1
2017-10-31T06:20:48.069Z,1509430848.069 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:20:48.069Z,1509430848.069 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T06:20:48.069Z,1509430848.069 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:20:48.082Z,1509430848.082 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:20:48.494Z,1509430848.494 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:20:48.494Z,1509430848.494 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T06:20:48.871Z,1509430848.871 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:20:48.872Z,1509430848.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:20:48.872Z,1509430848.872 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:21:04.058Z,1509430864.058 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T06:21:04.058Z,1509430864.058 [BPC1] Data Fault, FailCount= 2
2017-10-31T06:21:04.059Z,1509430864.059 [BPC1](ERROR): Data Fault
2017-10-31T06:21:04.126Z,1509430864.126 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:21:05.292Z,1509430865.292 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:21:05.293Z,1509430865.293 [BPC1] No Fault, FailCount= 2
2017-10-31T06:21:59.075Z,1509430919.075 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:22:09.880Z,1509430929.880 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002227
CHAN A1 (24V): -0.004309
CHAN A2 (12V): -0.002213
CHAN A3 (5V): 0.000227
CHAN B0 (3.3V): 0.000051
CHAN B1 (3.15aV): -0.000726
CHAN B2 (3.15bV): -0.000461
CHAN B3 (GND): 0.000200
OPEN: -0.000542
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:23:22.785Z,1509431002.785 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T06:23:39.947Z,1509431019.947 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:23:49.123Z,1509431029.123 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:23:49.124Z,1509431029.124 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T06:23:49.124Z,1509431029.124 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:23:49.162Z,1509431029.162 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:23:49.551Z,1509431029.551 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:23:49.551Z,1509431029.551 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T06:23:49.902Z,1509431029.902 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:23:49.902Z,1509431029.902 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:23:49.902Z,1509431029.902 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:23:50.722Z,1509431030.722 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003297
CHAN A1 (24V): -0.003889
CHAN A2 (12V): -0.002051
CHAN A3 (5V): 0.000656
CHAN B0 (3.3V): 0.000088
CHAN B1 (3.15aV): -0.000560
CHAN B2 (3.15bV): -0.000057
CHAN B3 (GND): -0.000312
OPEN: -0.000338
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:24:14.268Z,1509431054.268 [NAL9602](INFO): SBD MO Status=2, MOMSN=3317, MT Status=2, MTMSN=0
2017-10-31T06:24:14.268Z,1509431054.268 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:24:53.870Z,1509431093.870 [NAL9602](INFO): SBD MO Status=2, MOMSN=3317, MT Status=2, MTMSN=0
2017-10-31T06:24:53.871Z,1509431093.871 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:25:15.472Z,1509431115.472 [NAL9602](INFO): SBD MO Status=2, MOMSN=3317, MT Status=2, MTMSN=0
2017-10-31T06:25:15.473Z,1509431115.473 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:25:17.910Z,1509431117.910 [BPC1](ERROR): Failed to receive battery data
2017-10-31T06:25:17.910Z,1509431117.910 [BPC1] Communications Fault, FailCount= 1
2017-10-31T06:25:17.910Z,1509431117.910 [BPC1](ERROR): Communications Fault
2017-10-31T06:25:17.977Z,1509431117.977 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T06:25:18.330Z,1509431118.330 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T06:20:18.1Z
2017-10-31T06:25:18.330Z,1509431118.330 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T06:25:18.330Z,1509431118.330 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T06:25:19.145Z,1509431119.145 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:25:19.145Z,1509431119.145 [BPC1] No Fault, FailCount= 1
2017-10-31T06:25:22.838Z,1509431122.838 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:25:22.888Z,1509431122.888 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0200.lzma
2017-10-31T06:25:23.658Z,1509431123.658 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0200.lzma.bak
2017-10-31T06:25:23.658Z,1509431123.658 [DataOverHttps](INFO): SBD MOMSN=5178228
2017-10-31T06:25:33.013Z,1509431133.013 [DataOverHttps](INFO): Sending 625 bytes from file Logs/20171030T210256/Express0201.lzma
2017-10-31T06:25:33.818Z,1509431133.818 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0201.lzma.bak
2017-10-31T06:25:33.818Z,1509431133.818 [DataOverHttps](INFO): SBD MOMSN=5178230
2017-10-31T06:25:34.284Z,1509431134.284 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T06:25:34.284Z,1509431134.284 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T06:25:34.284Z,1509431134.284 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T06:25:40.096Z,1509431140.096 [NAL9602](INFO): SBD MO Status=2, MOMSN=3317, MT Status=2, MTMSN=0
2017-10-31T06:25:40.096Z,1509431140.096 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:25:40.493Z,1509431140.493 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T06:25:40.975Z,1509431140.975 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133821
CHAN A1 (24V): -0.004639
CHAN A2 (12V): -0.002279
CHAN A3 (5V): -0.000118
CHAN B0 (3.3V): 0.000188
CHAN B1 (3.15aV): -0.000086
CHAN B2 (3.15bV): -0.000331
CHAN B3 (GND): -0.000045
OPEN: -0.000585
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:26:11.291Z,1509431171.291 [NAL9602](INFO): Powering down
2017-10-31T06:26:45.607Z,1509431205.607 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T06:26:45.607Z,1509431205.607 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:26:45.607Z,1509431205.607 [BPC1](ERROR): Data Fault
2017-10-31T06:26:45.680Z,1509431205.680 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:26:46.829Z,1509431206.829 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:26:46.829Z,1509431206.829 [BPC1] No Fault, FailCount= 1
2017-10-31T06:26:50.014Z,1509431210.014 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:26:50.014Z,1509431210.014 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T06:26:50.014Z,1509431210.014 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:26:50.045Z,1509431210.045 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:26:50.429Z,1509431210.429 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:26:50.429Z,1509431210.429 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T06:26:50.827Z,1509431210.827 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:26:50.827Z,1509431210.827 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:26:50.828Z,1509431210.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:27:11.266Z,1509431231.266 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:27:22.056Z,1509431242.056 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134975
CHAN A1 (24V): -0.003246
CHAN A2 (12V): -0.002341
CHAN A3 (5V): -0.000012
CHAN B0 (3.3V): -0.000268
CHAN B1 (3.15aV): 0.000178
CHAN B2 (3.15bV): -0.000358
CHAN B3 (GND): 0.000276
OPEN: -0.000524
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:27:33.208Z,1509431253.208 [BPC1](ERROR): Failed to receive battery data
2017-10-31T06:27:33.208Z,1509431253.208 [BPC1] Communications Fault, FailCount= 1
2017-10-31T06:27:33.208Z,1509431253.208 [BPC1](ERROR): Communications Fault
2017-10-31T06:27:33.249Z,1509431253.249 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T06:27:34.430Z,1509431254.430 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:27:34.430Z,1509431254.430 [BPC1] No Fault, FailCount= 1
2017-10-31T06:28:52.116Z,1509431332.116 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:29:02.902Z,1509431342.902 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003404
CHAN A1 (24V): -0.003891
CHAN A2 (12V): -0.002335
CHAN A3 (5V): 0.000338
CHAN B0 (3.3V): -0.000010
CHAN B1 (3.15aV): -0.000052
CHAN B2 (3.15bV): -0.000672
CHAN B3 (GND): 0.000505
OPEN: -0.000347
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:29:14.875Z,1509431354.875 [BPC1](ERROR): Failed to parse message.
2017-10-31T06:29:14.875Z,1509431354.875 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T06:29:14.875Z,1509431354.875 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:29:14.875Z,1509431354.875 [BPC1](ERROR): Data Fault
2017-10-31T06:29:14.919Z,1509431354.919 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:29:16.099Z,1509431356.099 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:29:16.099Z,1509431356.099 [BPC1] No Fault, FailCount= 1
2017-10-31T06:29:51.163Z,1509431391.163 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:29:51.163Z,1509431391.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T06:29:51.163Z,1509431391.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:29:51.193Z,1509431391.193 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:29:51.610Z,1509431391.610 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:29:51.610Z,1509431391.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T06:29:51.967Z,1509431391.967 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:29:51.967Z,1509431391.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:29:51.967Z,1509431391.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:30:23.145Z,1509431423.145 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T06:30:23.145Z,1509431423.145 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:30:23.145Z,1509431423.145 [BPC1](ERROR): Data Fault
2017-10-31T06:30:23.168Z,1509431423.168 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:30:24.369Z,1509431424.369 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:30:24.369Z,1509431424.369 [BPC1] No Fault, FailCount= 1
2017-10-31T06:30:33.201Z,1509431433.201 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:30:34.771Z,1509431434.771 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T06:30:34.772Z,1509431434.772 [Default:CheckIn:C.Wait] Stopped
2017-10-31T06:30:34.772Z,1509431434.772 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T06:30:34.772Z,1509431434.772 [Default:CheckIn:D] Running Loop=1
2017-10-31T06:30:35.169Z,1509431435.169 [Default:CheckIn:D] Stopped
2017-10-31T06:30:35.169Z,1509431435.169 [Default:CheckIn:E] Running Loop=1
2017-10-31T06:30:35.567Z,1509431435.567 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 473.457585 min 
2017-10-31T06:30:35.567Z,1509431435.567 [Default:CheckIn:E] Stopped
2017-10-31T06:30:35.567Z,1509431435.567 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T06:30:35.572Z,1509431435.572 [Default:CheckIn] Stopped
2017-10-31T06:30:35.572Z,1509431435.572 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T06:30:35.572Z,1509431435.572 [Default:CheckIn](INFO): Running loop #42
2017-10-31T06:30:35.572Z,1509431435.572 [Default:CheckIn] Running Loop=42
2017-10-31T06:30:35.572Z,1509431435.572 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T06:30:35.572Z,1509431435.572 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T06:30:39.363Z,1509431439.363 [NAL9602](INFO): Powering up
2017-10-31T06:30:45.167Z,1509431445.167 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T06:30:45.167Z,1509431445.167 [BPC1] Data Fault, FailCount= 2
2017-10-31T06:30:45.167Z,1509431445.167 [BPC1](ERROR): Data Fault
2017-10-31T06:30:45.189Z,1509431445.189 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:30:46.392Z,1509431446.392 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:30:46.392Z,1509431446.392 [BPC1] No Fault, FailCount= 2
2017-10-31T06:30:46.396Z,1509431446.396 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002950
CHAN A1 (24V): -0.004330
CHAN A2 (12V): -0.002301
CHAN A3 (5V): 0.000117
CHAN B0 (3.3V): 0.000154
CHAN B1 (3.15aV): 0.000152
CHAN B2 (3.15bV): -0.000393
CHAN B3 (GND): -0.000172
OPEN: -0.000404
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:30:50.328Z,1509431450.328 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:30:51.124Z,1509431451.124 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T06:30:51.124Z,1509431451.124 [NAL9602] Data Fault, FailCount= 2
2017-10-31T06:30:51.124Z,1509431451.124 [NAL9602](ERROR): Data Fault
2017-10-31T06:30:51.229Z,1509431451.229 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T06:30:51.530Z,1509431451.530 [NAL9602](INFO): Powering down
2017-10-31T06:30:52.396Z,1509431452.396 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T06:30:52.396Z,1509431452.396 [NAL9602] No Fault, FailCount= 2
2017-10-31T06:31:06.763Z,1509431466.763 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T06:31:06.763Z,1509431466.763 [BPC1] Data Fault, FailCount= 3
2017-10-31T06:31:06.763Z,1509431466.763 [BPC1](ERROR): Data Fault
2017-10-31T06:31:06.827Z,1509431466.827 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:31:08.004Z,1509431468.004 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:31:08.004Z,1509431468.004 [BPC1] No Fault, FailCount= 3
2017-10-31T06:31:21.534Z,1509431481.534 [NAL9602](INFO): Powering up NAL9602
2017-10-31T06:31:32.360Z,1509431492.360 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:32:16.566Z,1509431536.566 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:32:27.447Z,1509431547.447 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134498
CHAN A1 (24V): -0.004004
CHAN A2 (12V): -0.002006
CHAN A3 (5V): -0.000020
CHAN B0 (3.3V): -0.000063
CHAN B1 (3.15aV): -0.000070
CHAN B2 (3.15bV): -0.000140
CHAN B3 (GND): -0.000324
OPEN: -0.000718
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:32:28.545Z,1509431548.545 [PNI_TCM](ERROR): CRC does not match. Expected:0x42759 got:0x8729
2017-10-31T06:32:52.360Z,1509431572.360 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:32:52.361Z,1509431572.361 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T06:32:52.361Z,1509431572.361 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:32:52.411Z,1509431572.411 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:32:52.787Z,1509431572.787 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:32:52.787Z,1509431572.787 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T06:32:53.178Z,1509431573.178 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:32:53.179Z,1509431573.179 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:32:53.179Z,1509431573.179 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:33:08.721Z,1509431588.721 [NAL9602](INFO): SBD MO Status=0, MOMSN=3317, MT Status=0, MTMSN=0
2017-10-31T06:33:08.721Z,1509431588.721 [NAL9602](INFO): No messages in MT queue
2017-10-31T06:33:22.797Z,1509431602.797 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T06:33:57.585Z,1509431637.585 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:34:07.541Z,1509431647.541 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T06:34:07.541Z,1509431647.541 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:34:07.541Z,1509431647.541 [BPC1](ERROR): Data Fault
2017-10-31T06:34:07.585Z,1509431647.585 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:34:08.357Z,1509431648.357 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002753
CHAN A1 (24V): -0.004191
CHAN A2 (12V): -0.001741
CHAN A3 (5V): 0.000132
CHAN B0 (3.3V): 0.000178
CHAN B1 (3.15aV): 0.000057
CHAN B2 (3.15bV): -0.000410
CHAN B3 (GND): -0.000229
OPEN: -0.000464
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:34:08.768Z,1509431648.768 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:34:08.768Z,1509431648.768 [BPC1] No Fault, FailCount= 1
2017-10-31T06:35:06.101Z,1509431706.101 [NAL9602](INFO): GPS fix at 20171031T063503: (36.802798, -121.788106)
2017-10-31T06:35:06.180Z,1509431706.180 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T06:35:06.180Z,1509431706.180 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T06:35:10.755Z,1509431710.755 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20171030T210256/Courier0204.lzma
2017-10-31T06:35:11.479Z,1509431711.479 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0204.lzma.bak
2017-10-31T06:35:11.479Z,1509431711.479 [DataOverHttps](INFO): SBD MOMSN=5178247
2017-10-31T06:35:20.692Z,1509431720.692 [DataOverHttps](INFO): Sending 645 bytes from file Logs/20171030T210256/Express0205.lzma
2017-10-31T06:35:21.439Z,1509431721.439 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0205.lzma.bak
2017-10-31T06:35:21.439Z,1509431721.439 [DataOverHttps](INFO): SBD MOMSN=5178250
2017-10-31T06:35:21.905Z,1509431721.905 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T06:35:21.905Z,1509431721.905 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T06:35:21.905Z,1509431721.905 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T06:35:38.728Z,1509431738.728 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:35:41.038Z,1509431741.038 [NAL9602](INFO): Powering down
2017-10-31T06:35:49.516Z,1509431749.516 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134047
CHAN A1 (24V): -0.003389
CHAN A2 (12V): -0.002333
CHAN A3 (5V): 0.000227
CHAN B0 (3.3V): 0.000219
CHAN B1 (3.15aV): -0.000107
CHAN B2 (3.15bV): -0.000670
CHAN B3 (GND): -0.000101
OPEN: -0.000609
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:35:53.493Z,1509431753.493 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:35:53.493Z,1509431753.493 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T06:35:53.493Z,1509431753.493 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:35:53.521Z,1509431753.521 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:35:53.901Z,1509431753.901 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:35:53.901Z,1509431753.901 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T06:35:54.288Z,1509431754.288 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:35:54.288Z,1509431754.288 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:35:54.288Z,1509431754.288 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:37:19.758Z,1509431839.758 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:37:33.265Z,1509431853.265 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135372
CHAN A1 (24V): -0.004150
CHAN A2 (12V): -0.002286
CHAN A3 (5V): -0.000106
CHAN B0 (3.3V): 0.000226
CHAN B1 (3.15aV): 0.000246
CHAN B2 (3.15bV): -0.000484
CHAN B3 (GND): -0.000035
OPEN: -0.000235
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:38:54.507Z,1509431934.507 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:38:54.507Z,1509431934.507 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T06:38:54.507Z,1509431934.507 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:38:54.541Z,1509431934.541 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:38:54.906Z,1509431934.906 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:38:54.906Z,1509431934.906 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T06:38:55.305Z,1509431935.305 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:38:55.306Z,1509431935.306 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:38:55.306Z,1509431935.306 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:39:03.326Z,1509431943.326 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:39:14.131Z,1509431954.131 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134818
CHAN A1 (24V): -0.003329
CHAN A2 (12V): -0.001836
CHAN A3 (5V): 0.000045
CHAN B0 (3.3V): -0.000177
CHAN B1 (3.15aV): -0.000102
CHAN B2 (3.15bV): -0.000441
CHAN B3 (GND): 0.000235
OPEN: -0.000430
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:40:22.345Z,1509432022.345 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T06:40:22.346Z,1509432022.346 [Default:CheckIn:C.Wait] Stopped
2017-10-31T06:40:22.346Z,1509432022.346 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T06:40:22.346Z,1509432022.346 [Default:CheckIn:D] Running Loop=1
2017-10-31T06:40:22.751Z,1509432022.751 [Default:CheckIn:D] Stopped
2017-10-31T06:40:22.751Z,1509432022.751 [Default:CheckIn:E] Running Loop=1
2017-10-31T06:40:23.144Z,1509432023.144 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 483.250618 min 
2017-10-31T06:40:23.144Z,1509432023.144 [Default:CheckIn:E] Stopped
2017-10-31T06:40:23.144Z,1509432023.144 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T06:40:23.144Z,1509432023.144 [Default:CheckIn] Stopped
2017-10-31T06:40:23.145Z,1509432023.145 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T06:40:23.145Z,1509432023.145 [Default:CheckIn](INFO): Running loop #43
2017-10-31T06:40:23.145Z,1509432023.145 [Default:CheckIn] Running Loop=43
2017-10-31T06:40:23.145Z,1509432023.145 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T06:40:23.145Z,1509432023.145 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T06:40:28.188Z,1509432028.188 [NAL9602](INFO): Powering up
2017-10-31T06:40:32.716Z,1509432032.716 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T06:40:32.716Z,1509432032.716 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:40:32.716Z,1509432032.716 [BPC1](ERROR): Data Fault
2017-10-31T06:40:32.798Z,1509432032.798 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:40:33.961Z,1509432033.961 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:40:33.961Z,1509432033.961 [BPC1] No Fault, FailCount= 1
2017-10-31T06:40:39.091Z,1509432039.091 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:40:44.377Z,1509432044.377 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:40:55.209Z,1509432055.209 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002635
CHAN A1 (24V): -0.004176
CHAN A2 (12V): -0.001558
CHAN A3 (5V): 0.000251
CHAN B0 (3.3V): -0.000372
CHAN B1 (3.15aV): -0.000332
CHAN B2 (3.15bV): -0.000787
CHAN B3 (GND): 0.000276
OPEN: -0.000445
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:41:55.472Z,1509432115.472 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:41:55.472Z,1509432115.472 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T06:41:55.472Z,1509432115.472 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:41:55.522Z,1509432115.522 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:41:55.880Z,1509432115.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:41:55.880Z,1509432115.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T06:41:56.277Z,1509432116.277 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:41:56.278Z,1509432116.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:41:56.278Z,1509432116.278 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:41:59.029Z,1509432119.029 [NAL9602](INFO): SBD MO Status=2, MOMSN=3318, MT Status=2, MTMSN=0
2017-10-31T06:41:59.029Z,1509432119.029 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:42:29.002Z,1509432149.002 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:42:39.480Z,1509432159.480 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133974
CHAN A1 (24V): -0.004230
CHAN A2 (12V): -0.002580
CHAN A3 (5V): -0.000042
CHAN B0 (3.3V): 0.000134
CHAN B1 (3.15aV): -0.000125
CHAN B2 (3.15bV): -0.000455
CHAN B3 (GND): -0.000306
OPEN: -0.000553
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:42:58.221Z,1509432178.221 [NAL9602](INFO): SBD MO Status=2, MOMSN=3318, MT Status=2, MTMSN=0
2017-10-31T06:42:58.221Z,1509432178.221 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:43:17.419Z,1509432197.419 [NAL9602](INFO): SBD MO Status=0, MOMSN=3318, MT Status=0, MTMSN=0
2017-10-31T06:43:17.419Z,1509432197.419 [NAL9602](INFO): No messages in MT queue
2017-10-31T06:43:17.419Z,1509432197.419 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2017-10-31T06:43:23.110Z,1509432203.110 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T06:43:55.216Z,1509432235.216 [BPC1](ERROR): Failed to parse message.
2017-10-31T06:43:55.216Z,1509432235.216 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T06:43:55.216Z,1509432235.216 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:43:55.216Z,1509432235.216 [BPC1](ERROR): Data Fault
2017-10-31T06:43:55.281Z,1509432235.281 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:43:56.436Z,1509432236.436 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:43:56.436Z,1509432236.436 [BPC1] No Fault, FailCount= 1
2017-10-31T06:44:09.640Z,1509432249.640 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:44:15.205Z,1509432255.205 [BPC1](ERROR): Failed to parse message.
2017-10-31T06:44:15.205Z,1509432255.205 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T06:44:15.205Z,1509432255.205 [BPC1] Data Fault, FailCount= 2
2017-10-31T06:44:15.206Z,1509432255.206 [BPC1](ERROR): Data Fault
2017-10-31T06:44:15.264Z,1509432255.264 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:44:16.456Z,1509432256.456 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:44:16.456Z,1509432256.456 [BPC1] No Fault, FailCount= 2
2017-10-31T06:44:20.444Z,1509432260.444 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003120
CHAN A1 (24V): -0.003909
CHAN A2 (12V): -0.002374
CHAN A3 (5V): 0.000265
CHAN B0 (3.3V): 0.000161
CHAN B1 (3.15aV): 0.000039
CHAN B2 (3.15bV): -0.000320
CHAN B3 (GND): -0.000041
OPEN: -0.000451
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:44:43.575Z,1509432283.575 [BPC1](ERROR): Failed to receive battery data
2017-10-31T06:44:43.575Z,1509432283.575 [BPC1] Communications Fault, FailCount= 3
2017-10-31T06:44:43.575Z,1509432283.575 [BPC1](ERROR): Communications Fault
2017-10-31T06:44:43.621Z,1509432283.621 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T06:44:44.816Z,1509432284.816 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:44:44.816Z,1509432284.816 [BPC1] No Fault, FailCount= 3
2017-10-31T06:44:56.377Z,1509432296.377 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:44:56.377Z,1509432296.377 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T06:44:56.377Z,1509432296.377 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:44:56.407Z,1509432296.407 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:44:56.834Z,1509432296.834 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:44:56.834Z,1509432296.834 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T06:44:57.179Z,1509432297.179 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:44:57.180Z,1509432297.180 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:44:57.180Z,1509432297.180 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:45:23.166Z,1509432323.166 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T06:40:23.1Z
2017-10-31T06:45:23.166Z,1509432323.166 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T06:45:23.166Z,1509432323.166 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T06:45:27.907Z,1509432327.907 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0208.lzma
2017-10-31T06:45:28.651Z,1509432328.651 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0208.lzma.bak
2017-10-31T06:45:28.651Z,1509432328.651 [DataOverHttps](INFO): SBD MOMSN=5178268
2017-10-31T06:45:37.816Z,1509432337.816 [DataOverHttps](INFO): Sending 543 bytes from file Logs/20171030T210256/Express0209.lzma
2017-10-31T06:45:38.598Z,1509432338.598 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0209.lzma.bak
2017-10-31T06:45:38.599Z,1509432338.599 [DataOverHttps](INFO): SBD MOMSN=5178270
2017-10-31T06:45:39.082Z,1509432339.082 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T06:45:39.082Z,1509432339.082 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T06:45:39.082Z,1509432339.082 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T06:45:50.520Z,1509432350.520 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:45:54.464Z,1509432354.464 [NAL9602](INFO): Powering down
2017-10-31T06:46:01.350Z,1509432361.350 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002716
CHAN A1 (24V): -0.004107
CHAN A2 (12V): -0.002359
CHAN A3 (5V): 0.000432
CHAN B0 (3.3V): -0.000060
CHAN B1 (3.15aV): -0.000525
CHAN B2 (3.15bV): 0.000507
CHAN B3 (GND): -0.000836
OPEN: -0.000430
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:47:31.489Z,1509432451.489 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:47:44.930Z,1509432464.930 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134363
CHAN A1 (24V): -0.004071
CHAN A2 (12V): -0.002441
CHAN A3 (5V): -0.000124
CHAN B0 (3.3V): -0.000463
CHAN B1 (3.15aV): 0.000408
CHAN B2 (3.15bV): -0.000160
CHAN B3 (GND): -0.000135
OPEN: -0.000412
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:47:57.300Z,1509432477.300 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:47:57.300Z,1509432477.300 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T06:47:57.300Z,1509432477.300 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:47:57.351Z,1509432477.351 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:47:57.707Z,1509432477.707 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:47:57.707Z,1509432477.707 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T06:47:58.101Z,1509432478.101 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:47:58.101Z,1509432478.101 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:47:58.101Z,1509432478.101 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:49:15.160Z,1509432555.160 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:49:25.956Z,1509432565.956 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003469
CHAN A1 (24V): -0.003208
CHAN A2 (12V): -0.002077
CHAN A3 (5V): 0.000460
CHAN B0 (3.3V): 0.000310
CHAN B1 (3.15aV): -0.000566
CHAN B2 (3.15bV): -0.000249
CHAN B3 (GND): -0.000419
OPEN: -0.000430
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:50:39.529Z,1509432639.529 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T06:50:39.529Z,1509432639.529 [Default:CheckIn:C.Wait] Stopped
2017-10-31T06:50:39.530Z,1509432639.530 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T06:50:39.530Z,1509432639.530 [Default:CheckIn:D] Running Loop=1
2017-10-31T06:50:39.947Z,1509432639.947 [Default:CheckIn:D] Stopped
2017-10-31T06:50:39.947Z,1509432639.947 [Default:CheckIn:E] Running Loop=1
2017-10-31T06:50:40.316Z,1509432640.316 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 493.537207 min 
2017-10-31T06:50:40.316Z,1509432640.316 [Default:CheckIn:E] Stopped
2017-10-31T06:50:40.317Z,1509432640.317 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T06:50:40.317Z,1509432640.317 [Default:CheckIn] Stopped
2017-10-31T06:50:40.317Z,1509432640.317 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T06:50:40.317Z,1509432640.317 [Default:CheckIn](INFO): Running loop #44
2017-10-31T06:50:40.317Z,1509432640.317 [Default:CheckIn] Running Loop=44
2017-10-31T06:50:40.317Z,1509432640.317 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T06:50:40.317Z,1509432640.317 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T06:50:43.965Z,1509432643.965 [NAL9602](INFO): Powering up
2017-10-31T06:50:48.875Z,1509432648.875 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T06:50:48.875Z,1509432648.875 [BPC1] Data Fault, FailCount= 1
2017-10-31T06:50:48.875Z,1509432648.875 [BPC1](ERROR): Data Fault
2017-10-31T06:50:48.915Z,1509432648.915 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T06:50:50.098Z,1509432650.098 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T06:50:50.099Z,1509432650.099 [BPC1] No Fault, FailCount= 1
2017-10-31T06:50:54.841Z,1509432654.841 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:50:55.642Z,1509432655.642 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T06:50:55.643Z,1509432655.643 [NAL9602] Data Fault, FailCount= 1
2017-10-31T06:50:55.643Z,1509432655.643 [NAL9602](ERROR): Data Fault
2017-10-31T06:50:55.725Z,1509432655.725 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T06:50:56.039Z,1509432656.039 [NAL9602](INFO): Powering down
2017-10-31T06:50:56.121Z,1509432656.121 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:50:56.919Z,1509432656.919 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T06:50:56.919Z,1509432656.919 [NAL9602] No Fault, FailCount= 1
2017-10-31T06:50:58.480Z,1509432658.480 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:50:58.480Z,1509432658.480 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T06:50:58.480Z,1509432658.480 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:50:58.506Z,1509432658.506 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:50:58.929Z,1509432658.929 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:50:58.929Z,1509432658.929 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T06:50:59.283Z,1509432659.283 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:50:59.284Z,1509432659.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:50:59.284Z,1509432659.284 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:51:06.932Z,1509432666.932 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135024
CHAN A1 (24V): -0.003071
CHAN A2 (12V): -0.002253
CHAN A3 (5V): 0.000295
CHAN B0 (3.3V): 0.000196
CHAN B1 (3.15aV): -0.000299
CHAN B2 (3.15bV): -0.000139
CHAN B3 (GND): -0.000182
OPEN: -0.000232
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:51:26.042Z,1509432686.042 [NAL9602](INFO): Powering up NAL9602
2017-10-31T06:51:37.240Z,1509432697.240 [NAL9602](INFO): NAL9602 initialized
2017-10-31T06:52:28.418Z,1509432748.418 [NAL9602](INFO): SBD MO Status=2, MOMSN=3319, MT Status=2, MTMSN=0
2017-10-31T06:52:28.419Z,1509432748.419 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:52:37.288Z,1509432757.288 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:52:50.511Z,1509432770.511 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003522
CHAN A1 (24V): -0.003659
CHAN A2 (12V): -0.001995
CHAN A3 (5V): 0.000197
CHAN B0 (3.3V): -0.000240
CHAN B1 (3.15aV): -0.000599
CHAN B2 (3.15bV): -0.000234
CHAN B3 (GND): -0.000130
OPEN: -0.000488
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:53:23.321Z,1509432803.321 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T06:53:47.816Z,1509432827.816 [PNI_TCM](ERROR): CRC does not match. Expected:0x769 got:0x43520
2017-10-31T06:53:52.632Z,1509432832.632 [PNI_TCM](ERROR): CRC does not match. Expected:0x418 got:0x16384
2017-10-31T06:53:59.429Z,1509432839.429 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:53:59.429Z,1509432839.429 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T06:53:59.429Z,1509432839.429 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:53:59.471Z,1509432839.471 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:53:59.888Z,1509432839.888 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:53:59.888Z,1509432839.888 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T06:54:00.228Z,1509432840.228 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:54:00.229Z,1509432840.229 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:54:00.229Z,1509432840.229 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:54:11.823Z,1509432851.823 [PNI_TCM](ERROR): CRC does not match. Expected:0x33622 got:0x49325
2017-10-31T06:54:18.222Z,1509432858.222 [PNI_TCM](ERROR): CRC does not match. Expected:0x48613 got:0x39269
2017-10-31T06:54:19.809Z,1509432859.809 [PNI_TCM](ERROR): CRC does not match. Expected:0x37843 got:0x57533
2017-10-31T06:54:20.657Z,1509432860.657 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:54:21.415Z,1509432861.415 [PNI_TCM](ERROR): CRC does not match. Expected:0x12275 got:0x21958
2017-10-31T06:54:23.015Z,1509432863.015 [PNI_TCM](ERROR): CRC does not match. Expected:0x28977 got:0x7360
2017-10-31T06:54:26.227Z,1509432866.227 [PNI_TCM](ERROR): CRC does not match. Expected:0x49968 got:0x52507
2017-10-31T06:54:31.452Z,1509432871.452 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002724
CHAN A1 (24V): -0.004292
CHAN A2 (12V): -0.002110
CHAN A3 (5V): 0.000441
CHAN B0 (3.3V): 0.000073
CHAN B1 (3.15aV): 0.000702
CHAN B2 (3.15bV): -0.000181
CHAN B3 (GND): -0.000353
OPEN: -0.000523
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:54:35.811Z,1509432875.811 [PNI_TCM](ERROR): CRC does not match. Expected:0x21211 got:0x6591
2017-10-31T06:54:39.787Z,1509432879.787 [NAL9602](INFO): SBD MO Status=2, MOMSN=3319, MT Status=2, MTMSN=0
2017-10-31T06:54:39.787Z,1509432879.787 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:55:16.777Z,1509432916.777 [NAL9602](INFO): SBD MO Status=2, MOMSN=3319, MT Status=2, MTMSN=0
2017-10-31T06:55:16.777Z,1509432916.777 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T06:55:40.432Z,1509432940.432 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T06:50:40.3Z
2017-10-31T06:55:40.432Z,1509432940.432 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T06:55:40.432Z,1509432940.432 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T06:55:45.083Z,1509432945.083 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0212.lzma
2017-10-31T06:55:45.859Z,1509432945.859 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0212.lzma.bak
2017-10-31T06:55:45.859Z,1509432945.859 [DataOverHttps](INFO): SBD MOMSN=5178285
2017-10-31T06:55:55.252Z,1509432955.252 [DataOverHttps](INFO): Sending 590 bytes from file Logs/20171030T210256/Express0213.lzma
2017-10-31T06:55:56.027Z,1509432956.027 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0213.lzma.bak
2017-10-31T06:55:56.027Z,1509432956.027 [DataOverHttps](INFO): SBD MOMSN=5178287
2017-10-31T06:55:56.528Z,1509432956.528 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T06:55:56.528Z,1509432956.528 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T06:55:56.528Z,1509432956.528 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T06:56:01.596Z,1509432961.596 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:56:12.391Z,1509432972.391 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002247
CHAN A1 (24V): -0.004419
CHAN A2 (12V): -0.001933
CHAN A3 (5V): 0.000529
CHAN B0 (3.3V): 0.000270
CHAN B1 (3.15aV): -0.000210
CHAN B2 (3.15bV): -0.000538
CHAN B3 (GND): -0.000119
OPEN: -0.000639
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:56:39.919Z,1509432999.919 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T06:57:00.623Z,1509433020.623 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T06:57:00.623Z,1509433020.623 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T06:57:00.623Z,1509433020.623 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T06:57:00.636Z,1509433020.636 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T06:57:00.824Z,1509433020.824 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T06:57:00.824Z,1509433020.824 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T06:57:01.125Z,1509433021.125 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T06:57:01.126Z,1509433021.126 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T06:57:01.126Z,1509433021.126 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T06:57:10.687Z,1509433030.687 [NAL9602](INFO): Powering down
2017-10-31T06:57:42.758Z,1509433062.758 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:57:53.544Z,1509433073.544 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135156
CHAN A1 (24V): -0.003115
CHAN A2 (12V): -0.002433
CHAN A3 (5V): 0.000295
CHAN B0 (3.3V): -0.000330
CHAN B1 (3.15aV): 0.000230
CHAN B2 (3.15bV): -0.000040
CHAN B3 (GND): -0.000253
OPEN: -0.000700
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T06:59:23.558Z,1509433163.558 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T06:59:34.302Z,1509433174.302 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003940
CHAN A1 (24V): -0.003430
CHAN A2 (12V): -0.002006
CHAN A3 (5V): 0.000307
CHAN B0 (3.3V): -0.000195
CHAN B1 (3.15aV): 0.000098
CHAN B2 (3.15bV): -0.000611
CHAN B3 (GND): 0.000097
OPEN: -0.000235
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:00:01.305Z,1509433201.305 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:00:01.305Z,1509433201.305 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T07:00:01.306Z,1509433201.306 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:00:01.355Z,1509433201.355 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:00:01.474Z,1509433201.474 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:00:01.474Z,1509433201.474 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T07:00:01.846Z,1509433201.846 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:00:01.846Z,1509433201.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:00:01.846Z,1509433201.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:00:06.219Z,1509433206.219 [PNI_TCM](ERROR): CRC does not match. Expected:0x40797 got:0x55323
2017-10-31T07:00:08.615Z,1509433208.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T07:00:09.017Z,1509433209.017 [PNI_TCM](ERROR): CRC does not match. Expected:0x36161 got:0x43584
2017-10-31T07:00:11.816Z,1509433211.816 [PNI_TCM](ERROR): CRC does not match. Expected:0x47406 got:0x39764
2017-10-31T07:00:25.017Z,1509433225.017 [PNI_TCM](ERROR): CRC does not match. Expected:0x50778 got:0x89
2017-10-31T07:00:27.831Z,1509433227.831 [PNI_TCM](ERROR): CRC does not match. Expected:0x52224 got:0x32007
2017-10-31T07:00:30.205Z,1509433230.205 [PNI_TCM](ERROR): CRC does not match. Expected:0x45565 got:0x16938
2017-10-31T07:00:35.823Z,1509433235.823 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T07:00:53.426Z,1509433253.426 [PNI_TCM](ERROR): CRC does not match. Expected:0x60120 got:0x147
2017-10-31T07:00:54.205Z,1509433254.205 [PNI_TCM](ERROR): CRC does not match. Expected:0x35264 got:0x10964
2017-10-31T07:00:57.035Z,1509433257.035 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T07:00:57.040Z,1509433257.040 [Default:CheckIn:C.Wait] Stopped
2017-10-31T07:00:57.040Z,1509433257.040 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T07:00:57.040Z,1509433257.040 [Default:CheckIn:D] Running Loop=1
2017-10-31T07:00:57.445Z,1509433257.445 [Default:CheckIn:D] Stopped
2017-10-31T07:00:57.445Z,1509433257.445 [Default:CheckIn:E] Running Loop=1
2017-10-31T07:00:57.848Z,1509433257.848 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 503.828841 min 
2017-10-31T07:00:57.848Z,1509433257.848 [Default:CheckIn:E] Stopped
2017-10-31T07:00:57.849Z,1509433257.849 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T07:00:57.849Z,1509433257.849 [Default:CheckIn] Stopped
2017-10-31T07:00:57.849Z,1509433257.849 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T07:00:57.849Z,1509433257.849 [Default:CheckIn](INFO): Running loop #45
2017-10-31T07:00:57.849Z,1509433257.849 [Default:CheckIn] Running Loop=45
2017-10-31T07:00:57.849Z,1509433257.849 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T07:00:57.849Z,1509433257.849 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T07:01:01.655Z,1509433261.655 [NAL9602](INFO): Powering up
2017-10-31T07:01:04.684Z,1509433264.684 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:01:07.836Z,1509433267.836 [PNI_TCM](ERROR): CRC does not match. Expected:0x39586 got:0x6591
2017-10-31T07:01:11.029Z,1509433271.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x29097 got:0x16810
2017-10-31T07:01:12.602Z,1509433272.602 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:01:15.520Z,1509433275.520 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133548
CHAN A1 (24V): -0.004419
CHAN A2 (12V): -0.002457
CHAN A3 (5V): 0.000277
CHAN B0 (3.3V): 0.000199
CHAN B1 (3.15aV): -0.000014
CHAN B2 (3.15bV): 0.000027
CHAN B3 (GND): 0.000005
OPEN: -0.000423
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:01:23.836Z,1509433283.836 [PNI_TCM](ERROR): CRC does not match. Expected:0x17295 got:0x10979
2017-10-31T07:01:33.447Z,1509433293.447 [PNI_TCM](ERROR): CRC does not match. Expected:0x53821 got:0x49328
2017-10-31T07:01:44.216Z,1509433304.216 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T07:01:44.296Z,1509433304.296 [NAL9602](FAULT): received: 
+CSQ:0

OK19, 2, 0, 0, 0

OK
2017-10-31T07:01:44.296Z,1509433304.296 [NAL9602] Data Fault, FailCount= 2
2017-10-31T07:01:44.296Z,1509433304.296 [NAL9602](ERROR): Data Fault
2017-10-31T07:01:44.371Z,1509433304.371 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T07:01:44.605Z,1509433304.605 [NAL9602](INFO): Powering down
2017-10-31T07:01:45.474Z,1509433305.474 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T07:01:45.474Z,1509433305.474 [NAL9602] No Fault, FailCount= 2
2017-10-31T07:01:51.027Z,1509433311.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x35068 got:0x21964
2017-10-31T07:01:52.633Z,1509433312.633 [PNI_TCM](ERROR): CRC does not match. Expected:0x35499 got:0x6591
2017-10-31T07:01:54.236Z,1509433314.236 [PNI_TCM](ERROR): CRC does not match. Expected:0x43664 got:0x3934
2017-10-31T07:02:14.772Z,1509433334.772 [NAL9602](INFO): Powering up NAL9602
2017-10-31T07:02:25.970Z,1509433345.970 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:02:26.775Z,1509433346.775 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T07:02:26.775Z,1509433346.775 [NAL9602] Data Fault, FailCount= 3
2017-10-31T07:02:26.775Z,1509433346.775 [NAL9602](ERROR): Data Fault
2017-10-31T07:02:26.865Z,1509433346.865 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T07:02:27.172Z,1509433347.172 [NAL9602](INFO): Powering down
2017-10-31T07:02:28.043Z,1509433348.043 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T07:02:28.043Z,1509433348.043 [NAL9602] No Fault, FailCount= 3
2017-10-31T07:02:45.640Z,1509433365.640 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:02:56.464Z,1509433376.464 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003414
CHAN A1 (24V): -0.003482
CHAN A2 (12V): -0.002270
CHAN A3 (5V): 0.000777
CHAN B0 (3.3V): -0.000349
CHAN B1 (3.15aV): -0.000661
CHAN B2 (3.15bV): -0.000363
CHAN B3 (GND): -0.000345
OPEN: -0.000444
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:02:57.183Z,1509433377.183 [NAL9602](INFO): Powering up NAL9602
2017-10-31T07:03:02.171Z,1509433382.171 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:03:02.171Z,1509433382.171 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T07:03:02.171Z,1509433382.171 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:03:02.185Z,1509433382.185 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:03:02.640Z,1509433382.640 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:03:02.640Z,1509433382.640 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T07:03:02.979Z,1509433382.979 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:03:02.979Z,1509433382.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:03:02.980Z,1509433382.980 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:03:08.133Z,1509433388.133 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:03:23.395Z,1509433403.395 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T07:03:42.131Z,1509433422.131 [NAL9602](INFO): SBD MO Status=2, MOMSN=3319, MT Status=2, MTMSN=0
2017-10-31T07:03:42.132Z,1509433422.132 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T07:04:26.881Z,1509433466.881 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:04:37.658Z,1509433477.658 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133897
CHAN A1 (24V): -0.005037
CHAN A2 (12V): -0.002220
CHAN A3 (5V): 0.000424
CHAN B0 (3.3V): 0.000054
CHAN B1 (3.15aV): -0.000316
CHAN B2 (3.15bV): 0.000376
CHAN B3 (GND): -0.000669
OPEN: -0.000317
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:05:58.224Z,1509433558.224 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T07:00:57.8Z
2017-10-31T07:05:58.225Z,1509433558.225 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T07:05:58.225Z,1509433558.225 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T07:06:02.363Z,1509433562.363 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0216.lzma
2017-10-31T07:06:03.111Z,1509433563.111 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0216.lzma.bak
2017-10-31T07:06:03.111Z,1509433563.111 [DataOverHttps](INFO): SBD MOMSN=5178304
2017-10-31T07:06:03.192Z,1509433563.192 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:06:03.192Z,1509433563.192 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T07:06:03.192Z,1509433563.192 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:06:03.218Z,1509433563.218 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:06:03.641Z,1509433563.641 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:06:03.641Z,1509433563.641 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T07:06:03.993Z,1509433563.993 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:06:03.993Z,1509433563.993 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:06:03.994Z,1509433563.994 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:06:07.771Z,1509433567.771 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:06:12.427Z,1509433572.427 [DataOverHttps](INFO): Sending 688 bytes from file Logs/20171030T210256/Express0217.lzma
2017-10-31T07:06:13.235Z,1509433573.235 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0217.lzma.bak
2017-10-31T07:06:13.235Z,1509433573.235 [DataOverHttps](INFO): SBD MOMSN=5178306
2017-10-31T07:06:13.701Z,1509433573.701 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T07:06:13.702Z,1509433573.702 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T07:06:13.702Z,1509433573.702 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T07:06:17.299Z,1509433577.299 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T07:06:23.506Z,1509433583.506 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T07:06:23.506Z,1509433583.506 [BPC1] Data Fault, FailCount= 1
2017-10-31T07:06:23.506Z,1509433583.506 [BPC1](ERROR): Data Fault
2017-10-31T07:06:23.591Z,1509433583.591 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:06:24.389Z,1509433584.389 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002680
CHAN A1 (24V): -0.004297
CHAN A2 (12V): -0.002345
CHAN A3 (5V): 0.000285
CHAN B0 (3.3V): -0.000687
CHAN B1 (3.15aV): -0.000860
CHAN B2 (3.15bV): 0.000358
CHAN B3 (GND): -0.000088
OPEN: -0.000442
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:06:24.819Z,1509433584.819 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:06:24.819Z,1509433584.819 [BPC1] No Fault, FailCount= 1
2017-10-31T07:06:47.479Z,1509433607.479 [NAL9602](INFO): Powering down
2017-10-31T07:07:54.604Z,1509433674.604 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:08:05.412Z,1509433685.412 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135156
CHAN A1 (24V): -0.002979
CHAN A2 (12V): -0.002282
CHAN A3 (5V): 0.000012
CHAN B0 (3.3V): 0.000229
CHAN B1 (3.15aV): 0.000074
CHAN B2 (3.15bV): -0.000326
CHAN B3 (GND): 0.000449
OPEN: -0.000388
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:08:39.506Z,1509433719.506 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T07:08:39.506Z,1509433719.506 [BPC1] Data Fault, FailCount= 1
2017-10-31T07:08:39.506Z,1509433719.506 [BPC1](ERROR): Data Fault
2017-10-31T07:08:39.529Z,1509433719.529 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:08:40.730Z,1509433720.730 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:08:40.730Z,1509433720.730 [BPC1] No Fault, FailCount= 1
2017-10-31T07:09:04.309Z,1509433744.309 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:09:04.309Z,1509433744.309 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T07:09:04.309Z,1509433744.309 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:09:04.322Z,1509433744.322 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:09:04.719Z,1509433744.719 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:09:04.719Z,1509433744.719 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T07:09:05.117Z,1509433745.117 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:09:05.117Z,1509433745.117 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:09:05.118Z,1509433745.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:09:35.695Z,1509433775.695 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:09:46.526Z,1509433786.526 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003804
CHAN A1 (24V): -0.003633
CHAN A2 (12V): -0.002101
CHAN A3 (5V): 0.000008
CHAN B0 (3.3V): -0.000722
CHAN B1 (3.15aV): 0.000037
CHAN B2 (3.15bV): -0.000613
CHAN B3 (GND): 0.000059
OPEN: -0.000117
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:11:14.336Z,1509433874.336 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T07:11:14.336Z,1509433874.336 [Default:CheckIn:C.Wait] Stopped
2017-10-31T07:11:14.337Z,1509433874.337 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T07:11:14.337Z,1509433874.337 [Default:CheckIn:D] Running Loop=1
2017-10-31T07:11:14.791Z,1509433874.791 [Default:CheckIn:D] Stopped
2017-10-31T07:11:14.791Z,1509433874.791 [Default:CheckIn:E] Running Loop=1
2017-10-31T07:11:15.132Z,1509433875.132 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 514.117969 min 
2017-10-31T07:11:15.133Z,1509433875.133 [Default:CheckIn:E] Stopped
2017-10-31T07:11:15.141Z,1509433875.141 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T07:11:15.141Z,1509433875.141 [Default:CheckIn] Stopped
2017-10-31T07:11:15.141Z,1509433875.141 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T07:11:15.141Z,1509433875.141 [Default:CheckIn](INFO): Running loop #46
2017-10-31T07:11:15.142Z,1509433875.142 [Default:CheckIn] Running Loop=46
2017-10-31T07:11:15.142Z,1509433875.142 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T07:11:15.142Z,1509433875.142 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T07:11:18.457Z,1509433878.457 [BPC1](ERROR): Failed to receive battery data
2017-10-31T07:11:18.458Z,1509433878.458 [BPC1] Communications Fault, FailCount= 1
2017-10-31T07:11:18.458Z,1509433878.458 [BPC1](ERROR): Communications Fault
2017-10-31T07:11:18.480Z,1509433878.480 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T07:11:18.480Z,1509433878.480 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:11:18.568Z,1509433878.568 [NAL9602](INFO): Powering up
2017-10-31T07:11:19.388Z,1509433879.388 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:11:19.388Z,1509433879.388 [BPC1] No Fault, FailCount= 1
2017-10-31T07:11:28.957Z,1509433888.957 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134235
CHAN A1 (24V): -0.004092
CHAN A2 (12V): -0.002283
CHAN A3 (5V): -0.000173
CHAN B0 (3.3V): 0.000025
CHAN B1 (3.15aV): 0.000028
CHAN B2 (3.15bV): -0.000351
CHAN B3 (GND): -0.000079
OPEN: -0.000453
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:11:29.706Z,1509433889.706 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:12:01.696Z,1509433921.696 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T07:12:01.775Z,1509433921.775 [NAL9602](FAULT): received: 
+CSQ:0

OK19, 2, 0, 0, 0

OK
2017-10-31T07:12:01.775Z,1509433921.775 [NAL9602] Data Fault, FailCount= 4
2017-10-31T07:12:01.775Z,1509433921.775 [NAL9602](ERROR): Data Fault
2017-10-31T07:12:01.881Z,1509433921.881 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T07:12:02.097Z,1509433922.097 [NAL9602](INFO): Powering down
2017-10-31T07:12:02.954Z,1509433922.954 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T07:12:02.954Z,1509433922.954 [NAL9602] No Fault, FailCount= 4
2017-10-31T07:12:05.342Z,1509433925.342 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:12:05.342Z,1509433925.342 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T07:12:05.342Z,1509433925.342 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:12:05.387Z,1509433925.387 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:12:05.781Z,1509433925.781 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:12:05.781Z,1509433925.781 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T07:12:06.141Z,1509433926.141 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:12:06.141Z,1509433926.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:12:06.141Z,1509433926.141 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:12:32.276Z,1509433952.276 [NAL9602](INFO): Powering up NAL9602
2017-10-31T07:12:43.085Z,1509433963.085 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:12:59.145Z,1509433979.145 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:13:09.947Z,1509433989.947 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002610
CHAN A1 (24V): -0.003882
CHAN A2 (12V): -0.002020
CHAN A3 (5V): 0.000277
CHAN B0 (3.3V): -0.000383
CHAN B1 (3.15aV): -0.000455
CHAN B2 (3.15bV): -0.000213
CHAN B3 (GND): -0.000445
OPEN: -0.000435
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:13:23.754Z,1509434003.754 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T07:14:40.100Z,1509434080.100 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:14:50.841Z,1509434090.841 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134222
CHAN A1 (24V): -0.003726
CHAN A2 (12V): -0.002050
CHAN A3 (5V): 0.000012
CHAN B0 (3.3V): -0.000287
CHAN B1 (3.15aV): -0.000260
CHAN B2 (3.15bV): -0.000308
CHAN B3 (GND): -0.000151
OPEN: -0.000251
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:15:06.426Z,1509434106.426 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:15:06.426Z,1509434106.426 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T07:15:06.426Z,1509434106.426 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:15:06.439Z,1509434106.439 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:15:06.847Z,1509434106.847 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:15:06.847Z,1509434106.847 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T07:15:07.225Z,1509434107.225 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:15:07.225Z,1509434107.225 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:15:07.225Z,1509434107.225 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:16:15.233Z,1509434175.233 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T07:11:15.1Z
2017-10-31T07:16:15.233Z,1509434175.233 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T07:16:15.233Z,1509434175.233 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T07:16:19.415Z,1509434179.415 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0220.lzma
2017-10-31T07:16:20.194Z,1509434180.194 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0220.lzma.bak
2017-10-31T07:16:20.194Z,1509434180.194 [DataOverHttps](INFO): SBD MOMSN=5178324
2017-10-31T07:16:20.252Z,1509434180.252 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T07:16:21.062Z,1509434181.062 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:16:30.436Z,1509434190.436 [DataOverHttps](INFO): Sending 673 bytes from file Logs/20171030T210256/Express0221.lzma
2017-10-31T07:16:30.500Z,1509434190.500 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T07:16:30.500Z,1509434190.500 [BPC1] Data Fault, FailCount= 1
2017-10-31T07:16:30.500Z,1509434190.500 [BPC1](ERROR): Data Fault
2017-10-31T07:16:30.548Z,1509434190.548 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:16:31.240Z,1509434191.240 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0221.lzma.bak
2017-10-31T07:16:31.240Z,1509434191.240 [DataOverHttps](INFO): SBD MOMSN=5178326
2017-10-31T07:16:31.703Z,1509434191.703 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T07:16:31.703Z,1509434191.703 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T07:16:31.703Z,1509434191.703 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T07:16:31.730Z,1509434191.730 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:16:31.730Z,1509434191.730 [BPC1] No Fault, FailCount= 1
2017-10-31T07:16:35.307Z,1509434195.307 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T07:16:40.749Z,1509434200.749 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002363
CHAN A1 (24V): -0.004210
CHAN A2 (12V): -0.001836
CHAN A3 (5V): -0.000236
CHAN B0 (3.3V): 0.000167
CHAN B1 (3.15aV): -0.000054
CHAN B2 (3.15bV): -0.000290
CHAN B3 (GND): -0.000389
OPEN: -0.000274
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:16:55.519Z,1509434215.519 [BPC1](ERROR): Failed to receive battery data
2017-10-31T07:16:55.520Z,1509434215.520 [BPC1] Communications Fault, FailCount= 2
2017-10-31T07:16:55.520Z,1509434215.520 [BPC1](ERROR): Communications Fault
2017-10-31T07:16:55.580Z,1509434215.580 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T07:16:56.757Z,1509434216.757 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:16:56.758Z,1509434216.758 [BPC1] No Fault, FailCount= 2
2017-10-31T07:17:05.488Z,1509434225.488 [NAL9602](INFO): Powering down
2017-10-31T07:18:07.317Z,1509434287.317 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:18:07.317Z,1509434287.317 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T07:18:07.317Z,1509434287.317 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:18:07.385Z,1509434287.385 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:18:07.722Z,1509434287.722 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:18:07.722Z,1509434287.722 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T07:18:08.113Z,1509434288.113 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:18:08.114Z,1509434288.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:18:08.114Z,1509434288.114 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:18:10.931Z,1509434290.931 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:18:21.787Z,1509434301.787 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003580
CHAN A1 (24V): -0.003324
CHAN A2 (12V): -0.002277
CHAN A3 (5V): 0.000635
CHAN B0 (3.3V): 0.000375
CHAN B1 (3.15aV): 0.000122
CHAN B2 (3.15bV): -0.000419
CHAN B3 (GND): 0.000183
OPEN: -0.000580
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:19:47.875Z,1509434387.875 [PNI_TCM](ERROR): CRC does not match. Expected:0x8690 got:0x10759
2017-10-31T07:19:51.063Z,1509434391.063 [PNI_TCM](ERROR): CRC does not match. Expected:0x39008 got:0x8217
2017-10-31T07:19:51.963Z,1509434391.963 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:19:52.667Z,1509434392.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x15703 got:0x32768
2017-10-31T07:19:54.270Z,1509434394.270 [PNI_TCM](ERROR): CRC does not match. Expected:0x2679 got:0x43520
2017-10-31T07:20:02.268Z,1509434402.268 [PNI_TCM](ERROR): CRC does not match. Expected:0x53180 got:0x45501
2017-10-31T07:20:02.701Z,1509434402.701 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002961
CHAN A1 (24V): -0.003291
CHAN A2 (12V): -0.001906
CHAN A3 (5V): 0.000304
CHAN B0 (3.3V): -0.000219
CHAN B1 (3.15aV): 0.000320
CHAN B2 (3.15bV): -0.000070
CHAN B3 (GND): 0.000143
OPEN: -0.000627
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:20:11.862Z,1509434411.862 [PNI_TCM](ERROR): CRC does not match. Expected:0x55927 got:0x21953
2017-10-31T07:20:13.471Z,1509434413.471 [PNI_TCM](ERROR): CRC does not match. Expected:0x52404 got:0x45735
2017-10-31T07:20:21.466Z,1509434421.466 [PNI_TCM](ERROR): CRC does not match. Expected:0x8960 got:0x49071
2017-10-31T07:21:08.425Z,1509434468.425 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:21:08.425Z,1509434468.425 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T07:21:08.425Z,1509434468.425 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:21:08.467Z,1509434468.467 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:21:08.868Z,1509434468.868 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:21:08.868Z,1509434468.868 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T07:21:09.236Z,1509434469.236 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:21:09.237Z,1509434469.237 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:21:09.237Z,1509434469.237 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:21:32.462Z,1509434492.462 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T07:21:32.462Z,1509434492.462 [Default:CheckIn:C.Wait] Stopped
2017-10-31T07:21:32.462Z,1509434492.462 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T07:21:32.462Z,1509434492.462 [Default:CheckIn:D] Running Loop=1
2017-10-31T07:21:32.847Z,1509434492.847 [Default:CheckIn:D] Stopped
2017-10-31T07:21:32.847Z,1509434492.847 [Default:CheckIn:E] Running Loop=1
2017-10-31T07:21:32.862Z,1509434492.862 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:21:33.256Z,1509434493.256 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 524.418880 min 
2017-10-31T07:21:33.256Z,1509434493.256 [Default:CheckIn:E] Stopped
2017-10-31T07:21:33.257Z,1509434493.257 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T07:21:33.257Z,1509434493.257 [Default:CheckIn] Stopped
2017-10-31T07:21:33.257Z,1509434493.257 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T07:21:33.257Z,1509434493.257 [Default:CheckIn](INFO): Running loop #47
2017-10-31T07:21:33.257Z,1509434493.257 [Default:CheckIn] Running Loop=47
2017-10-31T07:21:33.257Z,1509434493.257 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T07:21:33.257Z,1509434493.257 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T07:21:36.612Z,1509434496.612 [NAL9602](INFO): Powering up
2017-10-31T07:21:45.888Z,1509434505.888 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134324
CHAN A1 (24V): -0.004159
CHAN A2 (12V): -0.002521
CHAN A3 (5V): 0.000513
CHAN B0 (3.3V): 0.000055
CHAN B1 (3.15aV): 0.000520
CHAN B2 (3.15bV): -0.000249
CHAN B3 (GND): -0.000488
OPEN: -0.000492
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:21:47.418Z,1509434507.418 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:21:48.216Z,1509434508.216 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T07:21:48.216Z,1509434508.216 [NAL9602] Data Fault, FailCount= 5
2017-10-31T07:21:48.216Z,1509434508.216 [NAL9602](ERROR): Data Fault
2017-10-31T07:21:48.296Z,1509434508.296 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T07:21:48.296Z,1509434508.296 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T07:21:48.616Z,1509434508.616 [NAL9602](INFO): Powering down
2017-10-31T07:21:48.732Z,1509434508.732 [CBIT](INFO): Critical error at 20171031T072148
2017-10-31T07:22:00.653Z,1509434520.653 [PNI_TCM](ERROR): CRC does not match. Expected:0x18758 got:0x58648
2017-10-31T07:22:01.055Z,1509434521.055 [PNI_TCM](ERROR): CRC does not match. Expected:0x16983 got:0x45382
2017-10-31T07:22:24.655Z,1509434544.655 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T07:22:25.058Z,1509434545.058 [PNI_TCM](ERROR): CRC does not match. Expected:0x35817 got:0x16981
2017-10-31T07:22:27.061Z,1509434547.061 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16541
2017-10-31T07:23:16.160Z,1509434596.160 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:23:18.523Z,1509434598.523 [BPC1](ERROR): Failed to parse message.
2017-10-31T07:23:18.523Z,1509434598.523 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T07:23:18.523Z,1509434598.523 [BPC1] Data Fault, FailCount= 1
2017-10-31T07:23:18.523Z,1509434598.523 [BPC1](ERROR): Data Fault
2017-10-31T07:23:18.581Z,1509434598.581 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:23:19.766Z,1509434599.766 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:23:19.766Z,1509434599.766 [BPC1] No Fault, FailCount= 1
2017-10-31T07:23:23.786Z,1509434603.786 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T07:23:26.957Z,1509434606.957 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003568
CHAN A1 (24V): -0.003408
CHAN A2 (12V): -0.002512
CHAN A3 (5V): 0.000832
CHAN B0 (3.3V): -0.000151
CHAN B1 (3.15aV): -0.000172
CHAN B2 (3.15bV): -0.000716
CHAN B3 (GND): -0.000185
OPEN: -0.000126
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:23:48.397Z,1509434628.397 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T07:23:48.397Z,1509434628.397 [NAL9602] No Fault, FailCount= 5
2017-10-31T07:23:48.718Z,1509434628.718 [NAL9602](INFO): Powering up NAL9602
2017-10-31T07:23:59.519Z,1509434639.519 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:24:09.567Z,1509434649.567 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:24:09.567Z,1509434649.567 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T07:24:09.567Z,1509434649.567 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:24:09.585Z,1509434649.585 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:24:10.000Z,1509434650.000 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:24:10.001Z,1509434650.001 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T07:24:10.359Z,1509434650.359 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:24:10.360Z,1509434650.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:24:10.360Z,1509434650.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:24:48.177Z,1509434688.177 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T07:24:48.177Z,1509434688.177 [BPC1] Data Fault, FailCount= 1
2017-10-31T07:24:48.177Z,1509434688.177 [BPC1](ERROR): Data Fault
2017-10-31T07:24:48.225Z,1509434688.225 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:24:49.406Z,1509434689.406 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:24:49.406Z,1509434689.406 [BPC1] No Fault, FailCount= 1
2017-10-31T07:24:56.989Z,1509434696.989 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:25:07.828Z,1509434707.828 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002234
CHAN A1 (24V): -0.004380
CHAN A2 (12V): -0.001976
CHAN A3 (5V): 0.000242
CHAN B0 (3.3V): -0.000487
CHAN B1 (3.15aV): 0.000387
CHAN B2 (3.15bV): 0.000105
CHAN B3 (GND): -0.000179
OPEN: -0.000471
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:26:33.301Z,1509434793.301 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T07:21:33.3Z
2017-10-31T07:26:33.301Z,1509434793.301 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T07:26:33.302Z,1509434793.302 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T07:26:38.022Z,1509434798.022 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:26:38.101Z,1509434798.101 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171030T210256/Courier0224.lzma
2017-10-31T07:26:38.837Z,1509434798.837 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0224.lzma.bak
2017-10-31T07:26:38.837Z,1509434798.837 [DataOverHttps](INFO): SBD MOMSN=5178343
2017-10-31T07:26:44.904Z,1509434804.904 [BPC1](ERROR): Failed to receive battery data
2017-10-31T07:26:44.904Z,1509434804.904 [BPC1] Communications Fault, FailCount= 1
2017-10-31T07:26:44.904Z,1509434804.904 [BPC1](ERROR): Communications Fault
2017-10-31T07:26:44.928Z,1509434804.928 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T07:26:48.313Z,1509434808.313 [DataOverHttps](INFO): Sending 636 bytes from file Logs/20171030T210256/Express0225.lzma
2017-10-31T07:26:48.781Z,1509434808.781 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:26:48.781Z,1509434808.781 [BPC1] No Fault, FailCount= 1
2017-10-31T07:26:49.117Z,1509434809.117 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0225.lzma.bak
2017-10-31T07:26:49.117Z,1509434809.117 [DataOverHttps](INFO): SBD MOMSN=5178346
2017-10-31T07:26:49.596Z,1509434809.596 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T07:26:49.596Z,1509434809.596 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T07:26:49.596Z,1509434809.596 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T07:26:56.424Z,1509434816.424 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002637
CHAN A1 (24V): -0.004485
CHAN A2 (12V): -0.002339
CHAN A3 (5V): 0.000485
CHAN B0 (3.3V): -0.000617
CHAN B1 (3.15aV): -0.000498
CHAN B2 (3.15bV): 0.000027
CHAN B3 (GND): 0.000394
OPEN: -0.000647
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:27:10.431Z,1509434830.431 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:27:10.432Z,1509434830.432 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T07:27:10.432Z,1509434830.432 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:27:10.445Z,1509434830.445 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:27:10.806Z,1509434830.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:27:10.806Z,1509434830.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T07:27:11.185Z,1509434831.185 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:27:11.185Z,1509434831.185 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:27:11.186Z,1509434831.186 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:28:26.647Z,1509434906.647 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:28:37.463Z,1509434917.463 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002457
CHAN A1 (24V): -0.004397
CHAN A2 (12V): -0.002345
CHAN A3 (5V): 0.000151
CHAN B0 (3.3V): 0.000169
CHAN B1 (3.15aV): -0.000516
CHAN B2 (3.15bV): 0.000002
CHAN B3 (GND): 0.000258
OPEN: -0.000567
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:29:02.496Z,1509434942.496 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T07:29:33.295Z,1509434973.295 [NAL9602](INFO): Powering down
2017-10-31T07:30:07.774Z,1509435007.774 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:30:11.317Z,1509435011.317 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:30:11.317Z,1509435011.317 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T07:30:11.317Z,1509435011.317 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:30:11.330Z,1509435011.330 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:30:11.735Z,1509435011.735 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:30:11.735Z,1509435011.735 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T07:30:12.130Z,1509435012.130 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:30:12.130Z,1509435012.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:30:12.131Z,1509435012.131 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:30:18.558Z,1509435018.558 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134577
CHAN A1 (24V): -0.003303
CHAN A2 (12V): -0.002185
CHAN A3 (5V): 0.000158
CHAN B0 (3.3V): -0.000080
CHAN B1 (3.15aV): -0.000214
CHAN B2 (3.15bV): -0.000561
CHAN B3 (GND): -0.000232
OPEN: -0.000139
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:31:48.784Z,1509435108.784 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:31:50.337Z,1509435110.337 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T07:31:50.337Z,1509435110.337 [Default:CheckIn:C.Wait] Stopped
2017-10-31T07:31:50.337Z,1509435110.337 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T07:31:50.337Z,1509435110.337 [Default:CheckIn:D] Running Loop=1
2017-10-31T07:31:50.737Z,1509435110.737 [Default:CheckIn:D] Stopped
2017-10-31T07:31:50.737Z,1509435110.737 [Default:CheckIn:E] Running Loop=1
2017-10-31T07:31:51.139Z,1509435111.139 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 534.717057 min 
2017-10-31T07:31:51.143Z,1509435111.143 [Default:CheckIn:E] Stopped
2017-10-31T07:31:51.144Z,1509435111.144 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T07:31:51.144Z,1509435111.144 [Default:CheckIn] Stopped
2017-10-31T07:31:51.144Z,1509435111.144 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T07:31:51.144Z,1509435111.144 [Default:CheckIn](INFO): Running loop #48
2017-10-31T07:31:51.144Z,1509435111.144 [Default:CheckIn] Running Loop=48
2017-10-31T07:31:51.144Z,1509435111.144 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T07:31:51.144Z,1509435111.144 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T07:31:54.768Z,1509435114.768 [NAL9602](INFO): Powering up
2017-10-31T07:32:01.826Z,1509435121.826 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003564
CHAN A1 (24V): -0.003950
CHAN A2 (12V): -0.002348
CHAN A3 (5V): 0.000177
CHAN B0 (3.3V): -0.000525
CHAN B1 (3.15aV): -0.000198
CHAN B2 (3.15bV): 0.000093
CHAN B3 (GND): -0.000572
OPEN: -0.000527
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:32:05.748Z,1509435125.748 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:32:37.757Z,1509435157.757 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T07:32:37.841Z,1509435157.841 [NAL9602](FAULT): received: 
+CSQ:0

OK19, 2, 0, 0, 0

OK
2017-10-31T07:32:37.841Z,1509435157.841 [NAL9602] Data Fault, FailCount= 1
2017-10-31T07:32:37.841Z,1509435157.841 [NAL9602](ERROR): Data Fault
2017-10-31T07:32:37.932Z,1509435157.932 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T07:32:38.147Z,1509435158.147 [NAL9602](INFO): Powering down
2017-10-31T07:32:39.018Z,1509435159.018 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T07:32:39.018Z,1509435159.018 [NAL9602] No Fault, FailCount= 1
2017-10-31T07:33:08.351Z,1509435188.351 [NAL9602](INFO): Powering up NAL9602
2017-10-31T07:33:12.392Z,1509435192.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:33:12.392Z,1509435192.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T07:33:12.392Z,1509435192.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:33:12.421Z,1509435192.421 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:33:12.422Z,1509435192.422 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:33:19.549Z,1509435199.549 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:33:24.058Z,1509435204.058 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T07:33:32.054Z,1509435212.054 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:33:42.830Z,1509435222.830 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133891
CHAN A1 (24V): -0.003936
CHAN A2 (12V): -0.002274
CHAN A3 (5V): 0.000026
CHAN B0 (3.3V): 0.000026
CHAN B1 (3.15aV): 0.000366
CHAN B2 (3.15bV): -0.000260
CHAN B3 (GND): 0.000024
OPEN: -0.000547
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:35:12.847Z,1509435312.847 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:35:23.627Z,1509435323.627 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002907
CHAN A1 (24V): -0.003380
CHAN A2 (12V): -0.002348
CHAN A3 (5V): 0.000270
CHAN B0 (3.3V): -0.000445
CHAN B1 (3.15aV): -0.000252
CHAN B2 (3.15bV): -0.000588
CHAN B3 (GND): 0.000274
OPEN: -0.000038
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:36:03.893Z,1509435363.893 [PNI_TCM](ERROR): CRC does not match. Expected:0x63193 got:0x9499
2017-10-31T07:36:07.114Z,1509435367.114 [PNI_TCM](ERROR): CRC does not match. Expected:0x6311 got:0x49437
2017-10-31T07:36:09.102Z,1509435369.102 [PNI_TCM](ERROR): CRC does not match. Expected:0x60374 got:0x60189
2017-10-31T07:36:15.084Z,1509435375.084 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T07:36:15.487Z,1509435375.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x20258 got:0x45319
2017-10-31T07:36:24.700Z,1509435384.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x34448 got:0x50695
2017-10-31T07:36:29.504Z,1509435389.504 [PNI_TCM](ERROR): CRC does not match. Expected:0x31521 got:0x7490
2017-10-31T07:36:32.691Z,1509435392.691 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T07:36:36.318Z,1509435396.318 [BPC1](ERROR): Failed to receive battery data
2017-10-31T07:36:36.318Z,1509435396.318 [BPC1] Communications Fault, FailCount= 1
2017-10-31T07:36:36.318Z,1509435396.318 [BPC1](ERROR): Communications Fault
2017-10-31T07:36:36.361Z,1509435396.361 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T07:36:37.537Z,1509435397.537 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:36:37.537Z,1509435397.537 [BPC1] No Fault, FailCount= 1
2017-10-31T07:36:39.089Z,1509435399.089 [PNI_TCM](ERROR): CRC does not match. Expected:0x39380 got:0x26102
2017-10-31T07:36:42.306Z,1509435402.306 [PNI_TCM](ERROR): CRC does not match. Expected:0x18233 got:0x30471
2017-10-31T07:36:43.911Z,1509435403.911 [PNI_TCM](ERROR): CRC does not match. Expected:0x61926 got:0x0
2017-10-31T07:36:51.530Z,1509435411.530 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T07:31:51.1Z
2017-10-31T07:36:51.530Z,1509435411.530 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T07:36:51.530Z,1509435411.530 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T07:36:56.217Z,1509435416.217 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:36:56.242Z,1509435416.242 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0228.lzma
2017-10-31T07:36:57.035Z,1509435417.035 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0228.lzma.bak
2017-10-31T07:36:57.035Z,1509435417.035 [DataOverHttps](INFO): SBD MOMSN=5178363
2017-10-31T07:36:57.104Z,1509435417.104 [PNI_TCM](ERROR): CRC does not match. Expected:0x9359 got:0x18183
2017-10-31T07:37:06.462Z,1509435426.462 [DataOverHttps](INFO): Sending 719 bytes from file Logs/20171030T210256/Express0229.lzma
2017-10-31T07:37:07.266Z,1509435427.266 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0229.lzma.bak
2017-10-31T07:37:07.266Z,1509435427.266 [DataOverHttps](INFO): SBD MOMSN=5178365
2017-10-31T07:37:07.734Z,1509435427.734 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T07:37:07.734Z,1509435427.734 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T07:37:07.734Z,1509435427.734 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T07:37:11.324Z,1509435431.324 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T07:37:14.403Z,1509435434.403 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134092
CHAN A1 (24V): -0.004374
CHAN A2 (12V): -0.002088
CHAN A3 (5V): 0.000182
CHAN B0 (3.3V): -0.000030
CHAN B1 (3.15aV): 0.000498
CHAN B2 (3.15bV): -0.000004
CHAN B3 (GND): 0.000068
OPEN: -0.000501
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:37:41.541Z,1509435461.541 [NAL9602](INFO): Powering down
2017-10-31T07:38:07.169Z,1509435487.169 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T07:38:07.169Z,1509435487.169 [BPC1] Data Fault, FailCount= 1
2017-10-31T07:38:07.169Z,1509435487.169 [BPC1](ERROR): Data Fault
2017-10-31T07:38:07.235Z,1509435487.235 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:38:08.409Z,1509435488.409 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:38:08.409Z,1509435488.409 [BPC1] No Fault, FailCount= 1
2017-10-31T07:38:44.594Z,1509435524.594 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:38:55.419Z,1509435535.419 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003257
CHAN A1 (24V): -0.003197
CHAN A2 (12V): -0.002369
CHAN A3 (5V): 0.000192
CHAN B0 (3.3V): -0.000457
CHAN B1 (3.15aV): -0.000182
CHAN B2 (3.15bV): -0.000298
CHAN B3 (GND): 0.001107
OPEN: -0.000147
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:40:01.221Z,1509435601.221 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T07:40:01.221Z,1509435601.221 [BPC1] Data Fault, FailCount= 1
2017-10-31T07:40:01.221Z,1509435601.221 [BPC1](ERROR): Data Fault
2017-10-31T07:40:01.269Z,1509435601.269 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:40:02.453Z,1509435602.453 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:40:02.453Z,1509435602.453 [BPC1] No Fault, FailCount= 1
2017-10-31T07:40:23.573Z,1509435623.573 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T07:40:23.573Z,1509435623.573 [BPC1] Data Fault, FailCount= 2
2017-10-31T07:40:23.573Z,1509435623.573 [BPC1](ERROR): Data Fault
2017-10-31T07:40:23.669Z,1509435623.669 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:40:24.848Z,1509435624.848 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:40:24.848Z,1509435624.848 [BPC1] No Fault, FailCount= 2
2017-10-31T07:40:25.654Z,1509435625.654 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:40:36.426Z,1509435636.426 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134491
CHAN A1 (24V): -0.003913
CHAN A2 (12V): -0.002250
CHAN A3 (5V): 0.000236
CHAN B0 (3.3V): -0.000054
CHAN B1 (3.15aV): 0.000152
CHAN B2 (3.15bV): -0.000137
CHAN B3 (GND): 0.000235
OPEN: -0.000491
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:42:06.574Z,1509435726.574 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:42:08.166Z,1509435728.166 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T07:42:08.167Z,1509435728.167 [Default:CheckIn:C.Wait] Stopped
2017-10-31T07:42:08.167Z,1509435728.167 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T07:42:08.168Z,1509435728.168 [Default:CheckIn:D] Running Loop=1
2017-10-31T07:42:08.566Z,1509435728.566 [Default:CheckIn:D] Stopped
2017-10-31T07:42:08.566Z,1509435728.566 [Default:CheckIn:E] Running Loop=1
2017-10-31T07:42:08.959Z,1509435728.959 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 545.014193 min 
2017-10-31T07:42:08.959Z,1509435728.959 [Default:CheckIn:E] Stopped
2017-10-31T07:42:08.959Z,1509435728.959 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T07:42:08.959Z,1509435728.959 [Default:CheckIn] Stopped
2017-10-31T07:42:08.959Z,1509435728.959 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T07:42:08.959Z,1509435728.959 [Default:CheckIn](INFO): Running loop #49
2017-10-31T07:42:08.959Z,1509435728.959 [Default:CheckIn] Running Loop=49
2017-10-31T07:42:08.960Z,1509435728.960 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T07:42:08.960Z,1509435728.960 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T07:42:12.589Z,1509435732.589 [NAL9602](INFO): Powering up
2017-10-31T07:42:19.649Z,1509435739.649 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003770
CHAN A1 (24V): -0.003930
CHAN A2 (12V): -0.002112
CHAN A3 (5V): 0.000374
CHAN B0 (3.3V): -0.000113
CHAN B1 (3.15aV): -0.000275
CHAN B2 (3.15bV): -0.000195
CHAN B3 (GND): -0.000147
OPEN: -0.000632
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:42:23.577Z,1509435743.577 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:42:24.374Z,1509435744.374 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T07:42:24.374Z,1509435744.374 [NAL9602] Data Fault, FailCount= 2
2017-10-31T07:42:24.374Z,1509435744.374 [NAL9602](ERROR): Data Fault
2017-10-31T07:42:24.492Z,1509435744.492 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T07:42:24.774Z,1509435744.774 [NAL9602](INFO): Powering down
2017-10-31T07:42:25.701Z,1509435745.701 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T07:42:25.701Z,1509435745.701 [NAL9602] No Fault, FailCount= 2
2017-10-31T07:42:54.778Z,1509435774.778 [NAL9602](INFO): Powering up NAL9602
2017-10-31T07:43:05.575Z,1509435785.575 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:43:24.332Z,1509435804.332 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T07:43:27.486Z,1509435807.486 [PNI_TCM](ERROR): CRC does not match. Expected:0x12193 got:0x40480
2017-10-31T07:43:27.881Z,1509435807.881 [PNI_TCM](ERROR): CRC does not match. Expected:0x28688 got:0x47127
2017-10-31T07:43:39.094Z,1509435819.094 [PNI_TCM](ERROR): CRC does not match. Expected:0x50377 got:0x45648
2017-10-31T07:43:49.919Z,1509435829.919 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:44:00.732Z,1509435840.732 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134993
CHAN A1 (24V): -0.003670
CHAN A2 (12V): -0.002153
CHAN A3 (5V): -0.000082
CHAN B0 (3.3V): 0.000087
CHAN B1 (3.15aV): -0.000593
CHAN B2 (3.15bV): -0.000176
CHAN B3 (GND): 0.000144
OPEN: -0.000398
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:45:30.896Z,1509435930.896 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:45:41.735Z,1509435941.735 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002332
CHAN A1 (24V): -0.004241
CHAN A2 (12V): -0.002030
CHAN A3 (5V): 0.000188
CHAN B0 (3.3V): -0.000043
CHAN B1 (3.15aV): 0.000336
CHAN B2 (3.15bV): -0.000617
CHAN B3 (GND): 0.000059
OPEN: -0.000765
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:46:29.077Z,1509435989.077 [BPC1](ERROR): Failed to receive battery data
2017-10-31T07:46:29.077Z,1509435989.077 [BPC1] Communications Fault, FailCount= 1
2017-10-31T07:46:29.078Z,1509435989.078 [BPC1](ERROR): Communications Fault
2017-10-31T07:46:29.152Z,1509435989.152 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T07:46:30.330Z,1509435990.330 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:46:30.330Z,1509435990.330 [BPC1] No Fault, FailCount= 1
2017-10-31T07:47:09.071Z,1509436029.071 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T07:42:08.0Z
2017-10-31T07:47:09.071Z,1509436029.071 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T07:47:09.072Z,1509436029.072 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T07:47:13.716Z,1509436033.716 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:47:13.775Z,1509436033.775 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0232.lzma
2017-10-31T07:47:14.530Z,1509436034.530 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0232.lzma.bak
2017-10-31T07:47:14.530Z,1509436034.530 [DataOverHttps](INFO): SBD MOMSN=5178383
2017-10-31T07:47:24.318Z,1509436044.318 [DataOverHttps](INFO): Sending 639 bytes from file Logs/20171030T210256/Express0233.lzma
2017-10-31T07:47:25.120Z,1509436045.120 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0233.lzma.bak
2017-10-31T07:47:25.120Z,1509436045.120 [DataOverHttps](INFO): SBD MOMSN=5178385
2017-10-31T07:47:25.592Z,1509436045.592 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T07:47:25.592Z,1509436045.592 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T07:47:25.592Z,1509436045.592 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T07:47:32.480Z,1509436052.480 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133735
CHAN A1 (24V): -0.004200
CHAN A2 (12V): -0.002341
CHAN A3 (5V): 0.000247
CHAN B0 (3.3V): -0.000277
CHAN B1 (3.15aV): -0.000575
CHAN B2 (3.15bV): -0.000281
CHAN B3 (GND): 0.000132
OPEN: -0.000423
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:48:08.394Z,1509436088.394 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T07:48:12.464Z,1509436092.464 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:48:12.464Z,1509436092.464 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T07:48:12.837Z,1509436092.837 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:48:12.838Z,1509436092.838 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:48:12.838Z,1509436092.838 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:48:38.894Z,1509436118.894 [NAL9602](INFO): Powering down
2017-10-31T07:49:02.546Z,1509436142.546 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:49:13.348Z,1509436153.348 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003459
CHAN A1 (24V): -0.003718
CHAN A2 (12V): -0.002332
CHAN A3 (5V): 0.000435
CHAN B0 (3.3V): -0.000154
CHAN B1 (3.15aV): 0.000311
CHAN B2 (3.15bV): -0.000126
CHAN B3 (GND): -0.000182
OPEN: -0.000394
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:50:43.488Z,1509436243.488 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:50:54.264Z,1509436254.264 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134934
CHAN A1 (24V): -0.003315
CHAN A2 (12V): -0.002503
CHAN A3 (5V): -0.000212
CHAN B0 (3.3V): -0.000031
CHAN B1 (3.15aV): -0.000317
CHAN B2 (3.15bV): 0.000031
CHAN B3 (GND): -0.000186
OPEN: -0.000488
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:51:13.030Z,1509436273.030 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:51:13.031Z,1509436273.031 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T07:51:13.031Z,1509436273.031 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:51:13.068Z,1509436273.068 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:51:13.464Z,1509436273.464 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:51:13.464Z,1509436273.464 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T07:51:13.833Z,1509436273.833 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:51:13.833Z,1509436273.833 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:51:13.833Z,1509436273.833 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:52:24.669Z,1509436344.669 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:52:26.211Z,1509436346.211 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T07:52:26.212Z,1509436346.212 [Default:CheckIn:C.Wait] Stopped
2017-10-31T07:52:26.212Z,1509436346.212 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T07:52:26.212Z,1509436346.212 [Default:CheckIn:D] Running Loop=1
2017-10-31T07:52:26.666Z,1509436346.666 [Default:CheckIn:D] Stopped
2017-10-31T07:52:26.666Z,1509436346.666 [Default:CheckIn:E] Running Loop=1
2017-10-31T07:52:27.000Z,1509436347.000 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 555.315885 min 
2017-10-31T07:52:27.000Z,1509436347.000 [Default:CheckIn:E] Stopped
2017-10-31T07:52:27.001Z,1509436347.001 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T07:52:27.001Z,1509436347.001 [Default:CheckIn] Stopped
2017-10-31T07:52:27.001Z,1509436347.001 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T07:52:27.001Z,1509436347.001 [Default:CheckIn](INFO): Running loop #50
2017-10-31T07:52:27.001Z,1509436347.001 [Default:CheckIn] Running Loop=50
2017-10-31T07:52:27.002Z,1509436347.002 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T07:52:27.002Z,1509436347.002 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T07:52:30.245Z,1509436350.245 [BPC1](ERROR): Failed to receive battery data
2017-10-31T07:52:30.245Z,1509436350.245 [BPC1] Communications Fault, FailCount= 1
2017-10-31T07:52:30.245Z,1509436350.245 [BPC1](ERROR): Communications Fault
2017-10-31T07:52:30.270Z,1509436350.270 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T07:52:30.374Z,1509436350.374 [NAL9602](INFO): Powering up
2017-10-31T07:52:31.281Z,1509436351.281 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:52:31.282Z,1509436351.282 [BPC1] No Fault, FailCount= 1
2017-10-31T07:52:38.473Z,1509436358.473 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003174
CHAN A1 (24V): -0.004156
CHAN A2 (12V): -0.002051
CHAN A3 (5V): 0.000103
CHAN B0 (3.3V): -0.000033
CHAN B1 (3.15aV): -0.000348
CHAN B2 (3.15bV): 0.000211
CHAN B3 (GND): 0.000103
OPEN: -0.000342
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:52:41.178Z,1509436361.178 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:53:13.180Z,1509436393.180 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T07:53:13.255Z,1509436393.255 [NAL9602](FAULT): received: 
+CSQ:0

OK19, 2, 0, 0, 0

OK
2017-10-31T07:53:13.255Z,1509436393.255 [NAL9602] Data Fault, FailCount= 3
2017-10-31T07:53:13.255Z,1509436393.255 [NAL9602](ERROR): Data Fault
2017-10-31T07:53:13.356Z,1509436393.356 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T07:53:13.580Z,1509436393.580 [NAL9602](INFO): Powering down
2017-10-31T07:53:14.462Z,1509436394.462 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T07:53:14.462Z,1509436394.462 [NAL9602] No Fault, FailCount= 3
2017-10-31T07:53:24.433Z,1509436404.433 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T07:53:43.712Z,1509436423.712 [NAL9602](INFO): Powering up NAL9602
2017-10-31T07:53:54.910Z,1509436434.910 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:53:55.711Z,1509436435.711 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T07:53:55.711Z,1509436435.711 [NAL9602] Data Fault, FailCount= 4
2017-10-31T07:53:55.711Z,1509436435.711 [NAL9602](ERROR): Data Fault
2017-10-31T07:53:55.784Z,1509436435.784 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T07:53:56.116Z,1509436436.116 [NAL9602](INFO): Powering down
2017-10-31T07:53:56.992Z,1509436436.992 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T07:53:56.992Z,1509436436.992 [NAL9602] No Fault, FailCount= 4
2017-10-31T07:54:08.578Z,1509436448.578 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:54:14.158Z,1509436454.158 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:54:14.158Z,1509436454.158 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T07:54:14.158Z,1509436454.158 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:54:14.171Z,1509436454.171 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:54:14.586Z,1509436454.586 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:54:14.586Z,1509436454.586 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T07:54:14.947Z,1509436454.947 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:54:14.948Z,1509436454.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:54:14.949Z,1509436454.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:54:19.411Z,1509436459.411 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003621
CHAN A1 (24V): -0.003306
CHAN A2 (12V): -0.002294
CHAN A3 (5V): 0.000312
CHAN B0 (3.3V): -0.000513
CHAN B1 (3.15aV): 0.000008
CHAN B2 (3.15bV): -0.000032
CHAN B3 (GND): 0.000021
OPEN: -0.000289
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:54:26.120Z,1509436466.120 [NAL9602](INFO): Powering up NAL9602
2017-10-31T07:54:37.225Z,1509436477.225 [NAL9602](INFO): NAL9602 initialized
2017-10-31T07:55:49.732Z,1509436549.732 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:56:00.538Z,1509436560.538 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002862
CHAN A1 (24V): -0.003651
CHAN A2 (12V): -0.002527
CHAN A3 (5V): 0.000491
CHAN B0 (3.3V): -0.000216
CHAN B1 (3.15aV): -0.000067
CHAN B2 (3.15bV): -0.000093
CHAN B3 (GND): 0.000288
OPEN: -0.000470
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:56:18.105Z,1509436578.105 [BPC1](ERROR): Failed to receive battery data
2017-10-31T07:56:18.105Z,1509436578.105 [BPC1] Communications Fault, FailCount= 1
2017-10-31T07:56:18.105Z,1509436578.105 [BPC1](ERROR): Communications Fault
2017-10-31T07:56:18.136Z,1509436578.136 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T07:56:19.362Z,1509436579.362 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:56:19.362Z,1509436579.362 [BPC1] No Fault, FailCount= 1
2017-10-31T07:57:15.150Z,1509436635.150 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T07:57:15.150Z,1509436635.150 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T07:57:15.150Z,1509436635.150 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T07:57:15.191Z,1509436635.191 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T07:57:15.563Z,1509436635.563 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T07:57:15.563Z,1509436635.563 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T07:57:15.912Z,1509436635.912 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T07:57:15.913Z,1509436635.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T07:57:15.913Z,1509436635.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T07:57:25.906Z,1509436645.906 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T07:57:25.906Z,1509436645.906 [BPC1] Data Fault, FailCount= 1
2017-10-31T07:57:25.906Z,1509436645.906 [BPC1](ERROR): Data Fault
2017-10-31T07:57:25.932Z,1509436645.932 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T07:57:27.125Z,1509436647.125 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T07:52:27.0Z
2017-10-31T07:57:27.125Z,1509436647.125 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T07:57:27.125Z,1509436647.125 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T07:57:27.147Z,1509436647.147 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:57:27.147Z,1509436647.147 [BPC1] No Fault, FailCount= 1
2017-10-31T07:57:31.359Z,1509436651.359 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:57:31.399Z,1509436651.399 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0236.lzma
2017-10-31T07:57:32.176Z,1509436652.176 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0236.lzma.bak
2017-10-31T07:57:32.180Z,1509436652.180 [DataOverHttps](INFO): SBD MOMSN=5178402
2017-10-31T07:57:41.683Z,1509436661.683 [DataOverHttps](INFO): Sending 687 bytes from file Logs/20171030T210256/Express0237.lzma
2017-10-31T07:57:42.487Z,1509436662.487 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0237.lzma.bak
2017-10-31T07:57:42.487Z,1509436662.487 [DataOverHttps](INFO): SBD MOMSN=5178404
2017-10-31T07:57:42.957Z,1509436662.957 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T07:57:42.957Z,1509436662.957 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T07:57:42.957Z,1509436662.957 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T07:57:46.732Z,1509436666.732 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T07:57:49.804Z,1509436669.804 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133338
CHAN A1 (24V): -0.004179
CHAN A2 (12V): -0.002279
CHAN A3 (5V): 0.000244
CHAN B0 (3.3V): 0.000160
CHAN B1 (3.15aV): 0.000286
CHAN B2 (3.15bV): -0.000529
CHAN B3 (GND): -0.000398
OPEN: -0.000683
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:58:16.905Z,1509436696.905 [NAL9602](INFO): Powering down
2017-10-31T07:59:20.168Z,1509436760.168 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T07:59:30.981Z,1509436770.981 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135133
CHAN A1 (24V): -0.002771
CHAN A2 (12V): -0.001950
CHAN A3 (5V): 0.000268
CHAN B0 (3.3V): -0.000298
CHAN B1 (3.15aV): 0.000022
CHAN B2 (3.15bV): -0.000431
CHAN B3 (GND): 0.000085
OPEN: -0.000356
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T07:59:42.934Z,1509436782.934 [BPC1](ERROR): Failed to receive battery data
2017-10-31T07:59:42.934Z,1509436782.934 [BPC1] Communications Fault, FailCount= 1
2017-10-31T07:59:42.934Z,1509436782.934 [BPC1](ERROR): Communications Fault
2017-10-31T07:59:42.995Z,1509436782.995 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T07:59:47.044Z,1509436787.044 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T07:59:47.044Z,1509436787.044 [BPC1] No Fault, FailCount= 1
2017-10-31T08:00:15.918Z,1509436815.918 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:00:15.918Z,1509436815.918 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T08:00:15.918Z,1509436815.918 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:00:15.950Z,1509436815.950 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:00:16.315Z,1509436816.315 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:00:16.315Z,1509436816.315 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T08:00:16.747Z,1509436816.747 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:00:16.747Z,1509436816.747 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:00:16.748Z,1509436816.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:01:01.372Z,1509436861.372 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:01:12.184Z,1509436872.184 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003636
CHAN A1 (24V): -0.003215
CHAN A2 (12V): -0.002422
CHAN A3 (5V): 0.000409
CHAN B0 (3.3V): 0.000217
CHAN B1 (3.15aV): 0.000278
CHAN B2 (3.15bV): -0.000269
CHAN B3 (GND): 0.000100
OPEN: -0.000277
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:02:42.427Z,1509436962.427 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:02:43.671Z,1509436963.671 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T08:02:43.671Z,1509436963.671 [Default:CheckIn:C.Wait] Stopped
2017-10-31T08:02:43.671Z,1509436963.671 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T08:02:43.672Z,1509436963.672 [Default:CheckIn:D] Running Loop=1
2017-10-31T08:02:44.030Z,1509436964.030 [Default:CheckIn:D] Stopped
2017-10-31T08:02:44.030Z,1509436964.030 [Default:CheckIn:E] Running Loop=1
2017-10-31T08:02:44.444Z,1509436964.444 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 565.605273 min 
2017-10-31T08:02:44.445Z,1509436964.445 [Default:CheckIn:E] Stopped
2017-10-31T08:02:44.445Z,1509436964.445 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T08:02:44.445Z,1509436964.445 [Default:CheckIn] Stopped
2017-10-31T08:02:44.445Z,1509436964.445 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T08:02:44.445Z,1509436964.445 [Default:CheckIn](INFO): Running loop #51
2017-10-31T08:02:44.445Z,1509436964.445 [Default:CheckIn] Running Loop=51
2017-10-31T08:02:44.474Z,1509436964.474 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T08:02:44.474Z,1509436964.474 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T08:02:47.775Z,1509436967.775 [NAL9602](INFO): Powering up
2017-10-31T08:02:55.866Z,1509436975.866 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134518
CHAN A1 (24V): -0.003517
CHAN A2 (12V): -0.002062
CHAN A3 (5V): 0.000289
CHAN B0 (3.3V): 0.000044
CHAN B1 (3.15aV): -0.000023
CHAN B2 (3.15bV): 0.000010
CHAN B3 (GND): 0.000103
OPEN: -0.000498
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:02:58.582Z,1509436978.582 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:03:07.003Z,1509436987.003 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T08:03:07.003Z,1509436987.003 [BPC1] Data Fault, FailCount= 1
2017-10-31T08:03:07.003Z,1509436987.003 [BPC1](ERROR): Data Fault
2017-10-31T08:03:07.078Z,1509436987.078 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T08:03:08.250Z,1509436988.250 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:03:08.250Z,1509436988.250 [BPC1] No Fault, FailCount= 1
2017-10-31T08:03:17.043Z,1509436997.043 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:03:17.043Z,1509436997.043 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T08:03:17.043Z,1509436997.043 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:03:17.070Z,1509436997.070 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:03:17.455Z,1509436997.455 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:03:17.455Z,1509436997.455 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T08:03:17.838Z,1509436997.838 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:03:17.839Z,1509436997.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:03:17.839Z,1509436997.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:03:24.667Z,1509437004.667 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T08:03:30.587Z,1509437010.587 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T08:03:30.667Z,1509437010.667 [NAL9602](FAULT): received: 
+CSQ:0

OK19, 2, 0, 0, 0

OK
2017-10-31T08:03:30.667Z,1509437010.667 [NAL9602] Data Fault, FailCount= 5
2017-10-31T08:03:30.667Z,1509437010.667 [NAL9602](ERROR): Data Fault
2017-10-31T08:03:30.768Z,1509437010.768 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T08:03:30.769Z,1509437010.769 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T08:03:30.991Z,1509437010.991 [NAL9602](INFO): Powering down
2017-10-31T08:03:31.095Z,1509437011.095 [CBIT](INFO): Critical error at 20171031T080330
2017-10-31T08:04:26.039Z,1509437066.039 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:04:36.812Z,1509437076.812 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002971
CHAN A1 (24V): -0.004182
CHAN A2 (12V): -0.002401
CHAN A3 (5V): 0.000262
CHAN B0 (3.3V): 0.000326
CHAN B1 (3.15aV): 0.000021
CHAN B2 (3.15bV): 0.000033
CHAN B3 (GND): 0.000034
OPEN: -0.000462
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:05:30.710Z,1509437130.710 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T08:05:30.710Z,1509437130.710 [NAL9602] No Fault, FailCount= 5
2017-10-31T08:05:31.045Z,1509437131.045 [NAL9602](INFO): Powering up NAL9602
2017-10-31T08:05:42.240Z,1509437142.240 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:05:43.042Z,1509437143.042 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T08:05:43.042Z,1509437143.042 [NAL9602] Data Fault, FailCount= 1
2017-10-31T08:05:43.042Z,1509437143.042 [NAL9602](ERROR): Data Fault
2017-10-31T08:05:43.129Z,1509437143.129 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T08:05:43.438Z,1509437143.438 [NAL9602](INFO): Powering down
2017-10-31T08:05:44.316Z,1509437144.316 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T08:05:44.316Z,1509437144.316 [NAL9602] No Fault, FailCount= 1
2017-10-31T08:06:07.074Z,1509437167.074 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:06:13.806Z,1509437173.806 [NAL9602](INFO): Powering up NAL9602
2017-10-31T08:06:17.850Z,1509437177.850 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:06:17.850Z,1509437177.850 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T08:06:17.850Z,1509437177.850 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:06:17.890Z,1509437177.890 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:06:17.893Z,1509437177.893 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003702
CHAN A1 (24V): -0.003488
CHAN A2 (12V): -0.002150
CHAN A3 (5V): -0.000023
CHAN B0 (3.3V): -0.000437
CHAN B1 (3.15aV): -0.000707
CHAN B2 (3.15bV): -0.000358
CHAN B3 (GND): 0.000194
OPEN: -0.000359
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:06:18.280Z,1509437178.280 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:06:18.280Z,1509437178.280 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T08:06:18.664Z,1509437178.664 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:06:18.665Z,1509437178.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:06:18.665Z,1509437178.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:06:25.008Z,1509437185.008 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:07:17.591Z,1509437237.591 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T08:07:17.591Z,1509437237.591 [BPC1] Data Fault, FailCount= 1
2017-10-31T08:07:17.591Z,1509437237.591 [BPC1](ERROR): Data Fault
2017-10-31T08:07:17.639Z,1509437237.639 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T08:07:18.836Z,1509437238.836 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:07:18.836Z,1509437238.836 [BPC1] No Fault, FailCount= 1
2017-10-31T08:07:44.811Z,1509437264.811 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T08:02:44.5Z
2017-10-31T08:07:44.811Z,1509437264.811 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T08:07:44.811Z,1509437264.811 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T08:07:48.989Z,1509437268.989 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:07:49.064Z,1509437269.064 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171030T210256/Courier0240.lzma
2017-10-31T08:07:49.803Z,1509437269.803 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0240.lzma.bak
2017-10-31T08:07:49.804Z,1509437269.804 [DataOverHttps](INFO): SBD MOMSN=5178422
2017-10-31T08:07:59.312Z,1509437279.312 [DataOverHttps](INFO): Sending 680 bytes from file Logs/20171030T210256/Express0241.lzma
2017-10-31T08:08:00.116Z,1509437280.116 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0241.lzma.bak
2017-10-31T08:08:00.116Z,1509437280.116 [DataOverHttps](INFO): SBD MOMSN=5178425
2017-10-31T08:08:00.635Z,1509437280.635 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T08:08:00.636Z,1509437280.636 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T08:08:00.636Z,1509437280.636 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T08:08:04.315Z,1509437284.315 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T08:08:07.393Z,1509437287.393 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002990
CHAN A1 (24V): -0.004098
CHAN A2 (12V): -0.002173
CHAN A3 (5V): -0.000414
CHAN B0 (3.3V): 0.000090
CHAN B1 (3.15aV): -0.000423
CHAN B2 (3.15bV): -0.000638
CHAN B3 (GND): -0.000321
OPEN: -0.000510
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:08:34.528Z,1509437314.528 [NAL9602](INFO): Powering down
2017-10-31T08:09:18.945Z,1509437358.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:09:18.946Z,1509437358.946 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T08:09:18.946Z,1509437358.946 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:09:18.959Z,1509437358.959 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:09:19.382Z,1509437359.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:09:19.383Z,1509437359.383 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T08:09:19.756Z,1509437359.756 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:09:19.757Z,1509437359.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:09:19.757Z,1509437359.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:09:37.766Z,1509437377.766 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:09:48.589Z,1509437388.589 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134625
CHAN A1 (24V): -0.003882
CHAN A2 (12V): -0.002004
CHAN A3 (5V): 0.000438
CHAN B0 (3.3V): -0.000069
CHAN B1 (3.15aV): -0.000555
CHAN B2 (3.15bV): -0.000888
CHAN B3 (GND): -0.000103
OPEN: -0.000412
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:11:18.949Z,1509437478.949 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:11:29.753Z,1509437489.753 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003469
CHAN A1 (24V): -0.003120
CHAN A2 (12V): -0.002120
CHAN A3 (5V): 0.000001
CHAN B0 (3.3V): -0.000105
CHAN B1 (3.15aV): -0.000693
CHAN B2 (3.15bV): 0.000098
CHAN B3 (GND): 0.000317
OPEN: -0.000635
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:12:19.905Z,1509437539.905 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:12:19.905Z,1509437539.905 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T08:12:19.905Z,1509437539.905 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:12:19.931Z,1509437539.931 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:12:20.311Z,1509437540.311 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:12:20.311Z,1509437540.311 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T08:12:20.736Z,1509437540.736 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:12:20.765Z,1509437540.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:12:20.766Z,1509437540.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:12:59.926Z,1509437579.926 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:13:01.089Z,1509437581.089 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T08:13:01.089Z,1509437581.089 [Default:CheckIn:C.Wait] Stopped
2017-10-31T08:13:01.089Z,1509437581.089 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T08:13:01.090Z,1509437581.090 [Default:CheckIn:D] Running Loop=1
2017-10-31T08:13:01.501Z,1509437581.501 [Default:CheckIn:D] Stopped
2017-10-31T08:13:01.501Z,1509437581.501 [Default:CheckIn:E] Running Loop=1
2017-10-31T08:13:01.896Z,1509437581.896 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 575.896419 min 
2017-10-31T08:13:01.896Z,1509437581.896 [Default:CheckIn:E] Stopped
2017-10-31T08:13:01.896Z,1509437581.896 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T08:13:01.896Z,1509437581.896 [Default:CheckIn] Stopped
2017-10-31T08:13:01.896Z,1509437581.896 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T08:13:01.897Z,1509437581.897 [Default:CheckIn](INFO): Running loop #52
2017-10-31T08:13:01.897Z,1509437581.897 [Default:CheckIn] Running Loop=52
2017-10-31T08:13:01.897Z,1509437581.897 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T08:13:01.897Z,1509437581.897 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T08:13:05.523Z,1509437585.523 [NAL9602](INFO): Powering up
2017-10-31T08:13:13.793Z,1509437593.793 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134704
CHAN A1 (24V): -0.003930
CHAN A2 (12V): -0.002250
CHAN A3 (5V): 0.000415
CHAN B0 (3.3V): -0.000377
CHAN B1 (3.15aV): -0.000284
CHAN B2 (3.15bV): -0.000084
CHAN B3 (GND): -0.000244
OPEN: -0.000224
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:13:16.523Z,1509437596.523 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:13:24.988Z,1509437604.988 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T08:13:48.513Z,1509437628.513 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T08:13:48.588Z,1509437628.588 [NAL9602](FAULT): received: 
+CSQ:0

OK19, 2, 0, 0, 0

OK
2017-10-31T08:13:48.588Z,1509437628.588 [NAL9602] Data Fault, FailCount= 2
2017-10-31T08:13:48.588Z,1509437628.588 [NAL9602](ERROR): Data Fault
2017-10-31T08:13:48.676Z,1509437628.676 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T08:13:48.914Z,1509437628.914 [NAL9602](INFO): Powering down
2017-10-31T08:13:49.782Z,1509437629.782 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T08:13:49.782Z,1509437629.782 [NAL9602] No Fault, FailCount= 2
2017-10-31T08:14:10.372Z,1509437650.372 [PNI_TCM](ERROR): CRC does not match. Expected:0x45381 got:0x16809
2017-10-31T08:14:11.977Z,1509437651.977 [PNI_TCM](ERROR): CRC does not match. Expected:0x55279 got:0x16809
2017-10-31T08:14:13.580Z,1509437653.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x35763 got:0x7490
2017-10-31T08:14:19.144Z,1509437659.144 [NAL9602](INFO): Powering up NAL9602
2017-10-31T08:14:21.580Z,1509437661.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x40272 got:0x10900
2017-10-31T08:14:29.947Z,1509437669.947 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:14:44.033Z,1509437684.033 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:14:50.372Z,1509437690.372 [PNI_TCM](ERROR): CRC does not match. Expected:0x57526 got:0x48445
2017-10-31T08:14:54.812Z,1509437694.812 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002809
CHAN A1 (24V): -0.004186
CHAN A2 (12V): -0.002039
CHAN A3 (5V): 0.000294
CHAN B0 (3.3V): -0.000393
CHAN B1 (3.15aV): -0.000229
CHAN B2 (3.15bV): -0.000608
CHAN B3 (GND): -0.000633
OPEN: -0.000368
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:15:20.967Z,1509437720.967 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:15:20.967Z,1509437720.967 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T08:15:20.968Z,1509437720.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:15:20.981Z,1509437720.981 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:15:21.391Z,1509437721.391 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:15:21.391Z,1509437721.391 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T08:15:21.775Z,1509437721.775 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:15:21.779Z,1509437721.779 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:15:21.780Z,1509437721.780 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:16:00.549Z,1509437760.549 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:16:00.549Z,1509437760.549 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:16:00.549Z,1509437760.549 [BPC1](ERROR): Communications Fault
2017-10-31T08:16:00.594Z,1509437760.594 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:16:01.785Z,1509437761.785 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:16:01.785Z,1509437761.785 [BPC1] No Fault, FailCount= 1
2017-10-31T08:16:13.569Z,1509437773.569 [PNI_TCM](ERROR): CRC does not match. Expected:0x17303 got:0x65532
2017-10-31T08:16:24.862Z,1509437784.862 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:16:27.972Z,1509437787.972 [PNI_TCM](ERROR): CRC does not match. Expected:0x55250 got:0x40510
2017-10-31T08:16:29.588Z,1509437789.588 [PNI_TCM](ERROR): CRC does not match. Expected:0x21909 got:0x49330
2017-10-31T08:16:31.184Z,1509437791.184 [PNI_TCM](ERROR): CRC does not match. Expected:0x22444 got:0x16408
2017-10-31T08:16:32.774Z,1509437792.774 [PNI_TCM](ERROR): CRC does not match. Expected:0x65213 got:0x21959
2017-10-31T08:16:35.649Z,1509437795.649 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134045
CHAN A1 (24V): -0.004618
CHAN A2 (12V): -0.002300
CHAN A3 (5V): -0.000214
CHAN B0 (3.3V): 0.000072
CHAN B1 (3.15aV): -0.000747
CHAN B2 (3.15bV): -0.000482
CHAN B3 (GND): -0.000200
OPEN: -0.000427
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:16:37.571Z,1509437797.571 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T08:16:39.191Z,1509437799.191 [PNI_TCM](ERROR): CRC does not match. Expected:0x45144 got:0x44658
2017-10-31T08:16:45.146Z,1509437805.146 [NAL9602](INFO): SBD MO Status=2, MOMSN=3319, MT Status=2, MTMSN=0
2017-10-31T08:16:45.146Z,1509437805.146 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:16:51.970Z,1509437811.970 [PNI_TCM](ERROR): CRC does not match. Expected:0x28628 got:0x6335
2017-10-31T08:16:53.570Z,1509437813.570 [PNI_TCM](ERROR): CRC does not match. Expected:0x52095 got:0x16981
2017-10-31T08:16:55.177Z,1509437815.177 [PNI_TCM](ERROR): CRC does not match. Expected:0x442 got:0x44675
2017-10-31T08:17:21.022Z,1509437841.022 [NAL9602](INFO): SBD MO Status=2, MOMSN=3319, MT Status=2, MTMSN=0
2017-10-31T08:17:21.023Z,1509437841.023 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:17:41.827Z,1509437861.827 [NAL9602](INFO): SBD MO Status=0, MOMSN=3319, MT Status=0, MTMSN=0
2017-10-31T08:17:41.827Z,1509437861.827 [NAL9602](INFO): No messages in MT queue
2017-10-31T08:17:42.619Z,1509437862.619 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T08:17:42.619Z,1509437862.619 [NAL9602] Data Fault, FailCount= 1
2017-10-31T08:17:42.619Z,1509437862.619 [NAL9602](ERROR): Data Fault
2017-10-31T08:17:42.751Z,1509437862.751 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T08:17:43.016Z,1509437863.016 [NAL9602](INFO): Powering down
2017-10-31T08:17:43.895Z,1509437863.895 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T08:17:43.895Z,1509437863.895 [NAL9602] No Fault, FailCount= 1
2017-10-31T08:18:02.265Z,1509437882.265 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T08:13:01.9Z
2017-10-31T08:18:02.265Z,1509437882.265 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T08:18:02.266Z,1509437882.266 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T08:18:06.753Z,1509437886.753 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:18:06.829Z,1509437886.829 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0244.lzma
2017-10-31T08:18:07.576Z,1509437887.576 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0244.lzma.bak
2017-10-31T08:18:07.577Z,1509437887.577 [DataOverHttps](INFO): SBD MOMSN=5178443
2017-10-31T08:18:13.064Z,1509437893.064 [NAL9602](INFO): Powering up NAL9602
2017-10-31T08:18:16.976Z,1509437896.976 [DataOverHttps](INFO): Sending 666 bytes from file Logs/20171030T210256/Express0245.lzma
2017-10-31T08:18:17.780Z,1509437897.780 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0245.lzma.bak
2017-10-31T08:18:17.781Z,1509437897.781 [DataOverHttps](INFO): SBD MOMSN=5178445
2017-10-31T08:18:18.254Z,1509437898.254 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T08:18:18.254Z,1509437898.254 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T08:18:18.255Z,1509437898.255 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T08:18:22.049Z,1509437902.049 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:18:22.049Z,1509437902.049 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T08:18:22.049Z,1509437902.049 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:18:22.063Z,1509437902.063 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:18:22.231Z,1509437902.231 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:18:22.232Z,1509437902.232 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T08:18:22.602Z,1509437902.602 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:18:22.602Z,1509437902.602 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:18:22.603Z,1509437902.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:18:24.151Z,1509437904.151 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:18:25.069Z,1509437905.069 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002890
CHAN A1 (24V): -0.003430
CHAN A2 (12V): -0.002209
CHAN A3 (5V): 0.000223
CHAN B0 (3.3V): -0.000195
CHAN B1 (3.15aV): 0.000116
CHAN B2 (3.15bV): 0.000045
CHAN B3 (GND): -0.000129
OPEN: -0.000297
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:18:55.358Z,1509437935.358 [NAL9602](INFO): Powering down
2017-10-31T08:19:02.982Z,1509437942.982 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:19:02.983Z,1509437942.983 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:19:02.983Z,1509437942.983 [BPC1](ERROR): Communications Fault
2017-10-31T08:19:03.030Z,1509437943.030 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:19:04.228Z,1509437944.228 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:19:04.228Z,1509437944.228 [BPC1] No Fault, FailCount= 1
2017-10-31T08:19:55.312Z,1509437995.312 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:20:06.134Z,1509438006.134 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003930
CHAN A1 (24V): -0.003698
CHAN A2 (12V): -0.002138
CHAN A3 (5V): 0.000077
CHAN B0 (3.3V): -0.000307
CHAN B1 (3.15aV): -0.000046
CHAN B2 (3.15bV): -0.000266
CHAN B3 (GND): -0.000262
OPEN: -0.000804
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:20:06.492Z,1509438006.492 [BPC1](ERROR): Failed to parse message.
2017-10-31T08:20:06.492Z,1509438006.492 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T08:20:06.492Z,1509438006.492 [BPC1] Data Fault, FailCount= 1
2017-10-31T08:20:06.492Z,1509438006.492 [BPC1](ERROR): Data Fault
2017-10-31T08:20:06.527Z,1509438006.527 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T08:20:07.718Z,1509438007.718 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:20:07.718Z,1509438007.718 [BPC1] No Fault, FailCount= 1
2017-10-31T08:21:22.718Z,1509438082.718 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:21:22.718Z,1509438082.718 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T08:21:22.718Z,1509438082.718 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:21:22.731Z,1509438082.731 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:21:23.126Z,1509438083.126 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:21:23.126Z,1509438083.126 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T08:21:23.527Z,1509438083.527 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:21:23.527Z,1509438083.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:21:23.527Z,1509438083.527 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:21:36.323Z,1509438096.323 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:21:38.683Z,1509438098.683 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:21:38.683Z,1509438098.683 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:21:38.683Z,1509438098.683 [BPC1](ERROR): Communications Fault
2017-10-31T08:21:38.707Z,1509438098.707 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:21:39.914Z,1509438099.914 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:21:39.914Z,1509438099.914 [BPC1] No Fault, FailCount= 1
2017-10-31T08:21:47.109Z,1509438107.109 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003361
CHAN A1 (24V): -0.004336
CHAN A2 (12V): -0.001929
CHAN A3 (5V): 0.000566
CHAN B0 (3.3V): -0.000130
CHAN B1 (3.15aV): -0.000384
CHAN B2 (3.15bV): 0.000272
CHAN B3 (GND): -0.000086
OPEN: -0.000204
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:23:17.351Z,1509438197.351 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:23:18.948Z,1509438198.948 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T08:23:18.948Z,1509438198.948 [Default:CheckIn:C.Wait] Stopped
2017-10-31T08:23:18.948Z,1509438198.948 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T08:23:18.948Z,1509438198.948 [Default:CheckIn:D] Running Loop=1
2017-10-31T08:23:19.347Z,1509438199.347 [Default:CheckIn:D] Stopped
2017-10-31T08:23:19.347Z,1509438199.347 [Default:CheckIn:E] Running Loop=1
2017-10-31T08:23:19.752Z,1509438199.752 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 586.193880 min 
2017-10-31T08:23:19.752Z,1509438199.752 [Default:CheckIn:E] Stopped
2017-10-31T08:23:19.752Z,1509438199.752 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T08:23:19.752Z,1509438199.752 [Default:CheckIn] Stopped
2017-10-31T08:23:19.752Z,1509438199.752 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T08:23:19.753Z,1509438199.753 [Default:CheckIn](INFO): Running loop #53
2017-10-31T08:23:19.753Z,1509438199.753 [Default:CheckIn] Running Loop=53
2017-10-31T08:23:19.753Z,1509438199.753 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T08:23:19.753Z,1509438199.753 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T08:23:23.203Z,1509438203.203 [NAL9602](INFO): Powering up
2017-10-31T08:23:25.294Z,1509438205.294 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T08:23:31.284Z,1509438211.284 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003776
CHAN A1 (24V): -0.004054
CHAN A2 (12V): -0.002050
CHAN A3 (5V): 0.000592
CHAN B0 (3.3V): -0.000071
CHAN B1 (3.15aV): -0.000628
CHAN B2 (3.15bV): -0.001058
CHAN B3 (GND): -0.000139
OPEN: -0.000738
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:23:34.007Z,1509438214.007 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:24:23.942Z,1509438263.942 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:24:23.943Z,1509438263.943 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T08:24:23.943Z,1509438263.943 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:24:23.957Z,1509438263.957 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:24:24.379Z,1509438264.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:24:24.379Z,1509438264.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T08:24:24.660Z,1509438264.660 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:24:24.661Z,1509438264.661 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:24:24.661Z,1509438264.661 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:25:01.446Z,1509438301.446 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:25:12.270Z,1509438312.270 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134053
CHAN A1 (24V): -0.004251
CHAN A2 (12V): -0.002577
CHAN A3 (5V): 0.000165
CHAN B0 (3.3V): 0.000067
CHAN B1 (3.15aV): -0.000346
CHAN B2 (3.15bV): -0.000048
CHAN B3 (GND): -0.000107
OPEN: -0.000380
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:25:20.216Z,1509438320.216 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T08:25:20.216Z,1509438320.216 [BPC1] Data Fault, FailCount= 1
2017-10-31T08:25:20.216Z,1509438320.216 [BPC1](ERROR): Data Fault
2017-10-31T08:25:20.282Z,1509438320.282 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T08:25:24.016Z,1509438324.016 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:25:24.016Z,1509438324.016 [BPC1] No Fault, FailCount= 1
2017-10-31T08:25:47.960Z,1509438347.960 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:25:47.960Z,1509438347.960 [BPC1] Communications Fault, FailCount= 2
2017-10-31T08:25:47.960Z,1509438347.960 [BPC1](ERROR): Communications Fault
2017-10-31T08:25:48.035Z,1509438348.035 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:25:49.188Z,1509438349.188 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:25:49.188Z,1509438349.188 [BPC1] No Fault, FailCount= 2
2017-10-31T08:26:42.566Z,1509438402.566 [NAL9602](INFO): SBD MO Status=2, MOMSN=3320, MT Status=2, MTMSN=0
2017-10-31T08:26:42.567Z,1509438402.567 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:26:42.652Z,1509438402.652 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:26:53.446Z,1509438413.446 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003355
CHAN A1 (24V): -0.003470
CHAN A2 (12V): -0.001798
CHAN A3 (5V): 0.000327
CHAN B0 (3.3V): -0.000121
CHAN B1 (3.15aV): 0.000108
CHAN B2 (3.15bV): -0.000105
CHAN B3 (GND): 0.000018
OPEN: -0.000521
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:27:08.567Z,1509438428.567 [NAL9602](INFO): SBD MO Status=2, MOMSN=3320, MT Status=2, MTMSN=0
2017-10-31T08:27:08.568Z,1509438428.568 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:27:24.696Z,1509438444.696 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:27:24.697Z,1509438444.697 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T08:27:24.697Z,1509438444.697 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:27:24.721Z,1509438444.721 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:27:25.164Z,1509438445.164 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:27:25.164Z,1509438445.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T08:27:25.506Z,1509438445.506 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:27:25.506Z,1509438445.506 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:27:25.506Z,1509438445.506 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:27:27.868Z,1509438447.868 [NAL9602](INFO): SBD MO Status=0, MOMSN=3320, MT Status=0, MTMSN=0
2017-10-31T08:27:27.869Z,1509438447.869 [NAL9602](INFO): No messages in MT queue
2017-10-31T08:27:27.869Z,1509438447.869 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2017-10-31T08:27:29.062Z,1509438449.062 [NAL9602](INFO): GPS fix at 20171031T082725: (36.802679, -121.788008)
2017-10-31T08:27:29.119Z,1509438449.119 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T08:27:29.119Z,1509438449.119 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T08:27:33.705Z,1509438453.705 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20171030T210256/Courier0248.lzma
2017-10-31T08:27:34.481Z,1509438454.481 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0248.lzma.bak
2017-10-31T08:27:34.481Z,1509438454.481 [DataOverHttps](INFO): SBD MOMSN=5178464
2017-10-31T08:27:43.714Z,1509438463.714 [DataOverHttps](INFO): Sending 531 bytes from file Logs/20171030T210256/Express0249.lzma
2017-10-31T08:27:44.499Z,1509438464.499 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0249.lzma.bak
2017-10-31T08:27:44.499Z,1509438464.499 [DataOverHttps](INFO): SBD MOMSN=5178467
2017-10-31T08:27:44.977Z,1509438464.977 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T08:27:44.977Z,1509438464.977 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T08:27:44.978Z,1509438464.978 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T08:28:03.665Z,1509438483.665 [NAL9602](INFO): Powering down
2017-10-31T08:28:23.790Z,1509438503.790 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:28:34.530Z,1509438514.530 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134245
CHAN A1 (24V): -0.004232
CHAN A2 (12V): -0.002321
CHAN A3 (5V): -0.000253
CHAN B0 (3.3V): -0.000346
CHAN B1 (3.15aV): -0.000123
CHAN B2 (3.15bV): -0.000357
CHAN B3 (GND): 0.000120
OPEN: -0.000418
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:28:48.971Z,1509438528.971 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:28:48.972Z,1509438528.972 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:28:48.972Z,1509438528.972 [BPC1](ERROR): Communications Fault
2017-10-31T08:28:49.042Z,1509438529.042 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:28:49.956Z,1509438529.956 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:28:49.956Z,1509438529.956 [BPC1] No Fault, FailCount= 1
2017-10-31T08:30:04.531Z,1509438604.531 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:30:15.374Z,1509438615.374 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003292
CHAN A1 (24V): -0.003654
CHAN A2 (12V): -0.002274
CHAN A3 (5V): 0.000306
CHAN B0 (3.3V): -0.000142
CHAN B1 (3.15aV): -0.000084
CHAN B2 (3.15bV): -0.000205
CHAN B3 (GND): -0.000531
OPEN: -0.000919
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:30:25.752Z,1509438625.752 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:30:25.752Z,1509438625.752 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T08:30:25.752Z,1509438625.752 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:30:25.800Z,1509438625.800 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:30:26.129Z,1509438626.129 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:30:26.129Z,1509438626.129 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T08:30:26.477Z,1509438626.477 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:30:26.478Z,1509438626.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:30:26.478Z,1509438626.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:31:45.613Z,1509438705.613 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:31:59.221Z,1509438719.221 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134539
CHAN A1 (24V): -0.004015
CHAN A2 (12V): -0.002750
CHAN A3 (5V): 0.000574
CHAN B0 (3.3V): 0.000114
CHAN B1 (3.15aV): 0.000161
CHAN B2 (3.15bV): 0.000152
CHAN B3 (GND): -0.000209
OPEN: -0.000479
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:32:45.610Z,1509438765.610 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T08:32:45.610Z,1509438765.610 [Default:CheckIn:C.Wait] Stopped
2017-10-31T08:32:45.610Z,1509438765.610 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T08:32:45.614Z,1509438765.614 [Default:CheckIn:D] Running Loop=1
2017-10-31T08:32:45.999Z,1509438765.999 [Default:CheckIn:D] Stopped
2017-10-31T08:32:45.999Z,1509438765.999 [Default:CheckIn:E] Running Loop=1
2017-10-31T08:32:46.400Z,1509438766.400 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 595.638086 min 
2017-10-31T08:32:46.400Z,1509438766.400 [Default:CheckIn:E] Stopped
2017-10-31T08:32:46.401Z,1509438766.401 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T08:32:46.401Z,1509438766.401 [Default:CheckIn] Stopped
2017-10-31T08:32:46.401Z,1509438766.401 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T08:32:46.401Z,1509438766.401 [Default:CheckIn](INFO): Running loop #54
2017-10-31T08:32:46.401Z,1509438766.401 [Default:CheckIn] Running Loop=54
2017-10-31T08:32:46.401Z,1509438766.401 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T08:32:46.401Z,1509438766.401 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T08:32:49.743Z,1509438769.743 [NAL9602](INFO): Powering up
2017-10-31T08:33:00.891Z,1509438780.891 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:33:25.378Z,1509438805.378 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T08:33:26.558Z,1509438806.558 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:33:26.558Z,1509438806.558 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T08:33:26.559Z,1509438806.559 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:33:26.572Z,1509438806.572 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:33:26.949Z,1509438806.949 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:33:26.949Z,1509438806.949 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T08:33:27.344Z,1509438807.344 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:33:27.344Z,1509438807.344 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:33:27.345Z,1509438807.345 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:33:29.383Z,1509438809.383 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:33:40.197Z,1509438820.197 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002299
CHAN A1 (24V): -0.003983
CHAN A2 (12V): -0.001892
CHAN A3 (5V): 0.000401
CHAN B0 (3.3V): 0.000213
CHAN B1 (3.15aV): -0.000245
CHAN B2 (3.15bV): 0.000192
CHAN B3 (GND): -0.000475
OPEN: -0.000488
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:35:10.275Z,1509438910.275 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:35:21.083Z,1509438921.083 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003100
CHAN A1 (24V): -0.003757
CHAN A2 (12V): -0.002421
CHAN A3 (5V): 0.000109
CHAN B0 (3.3V): -0.000171
CHAN B1 (3.15aV): -0.000332
CHAN B2 (3.15bV): 0.000036
CHAN B3 (GND): 0.000286
OPEN: -0.000212
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:35:37.856Z,1509438937.856 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:35:37.856Z,1509438937.856 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:35:37.856Z,1509438937.856 [BPC1](ERROR): Communications Fault
2017-10-31T08:35:37.879Z,1509438937.879 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:35:39.074Z,1509438939.074 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:35:39.074Z,1509438939.074 [BPC1] No Fault, FailCount= 1
2017-10-31T08:35:52.809Z,1509438952.809 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x43392
2017-10-31T08:35:54.417Z,1509438954.417 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T08:35:56.005Z,1509438956.005 [PNI_TCM](ERROR): CRC does not match. Expected:0x39218 got:0x55836
2017-10-31T08:36:00.806Z,1509438960.806 [PNI_TCM](ERROR): CRC does not match. Expected:0x21761 got:0x32542
2017-10-31T08:36:02.412Z,1509438962.412 [PNI_TCM](ERROR): CRC does not match. Expected:0x41191 got:0x44524
2017-10-31T08:36:04.015Z,1509438964.015 [PNI_TCM](ERROR): CRC does not match. Expected:0x3463 got:0x29981
2017-10-31T08:36:07.211Z,1509438967.211 [PNI_TCM](ERROR): CRC does not match. Expected:0x23013 got:0x40573
2017-10-31T08:36:10.815Z,1509438970.815 [PNI_TCM](ERROR): CRC does not match. Expected:0x59025 got:0x54301
2017-10-31T08:36:15.211Z,1509438975.211 [PNI_TCM](ERROR): CRC does not match. Expected:0x38218 got:0x49069
2017-10-31T08:36:18.407Z,1509438978.407 [PNI_TCM](ERROR): CRC does not match. Expected:0x12658 got:0x21961
2017-10-31T08:36:23.180Z,1509438983.180 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:36:23.180Z,1509438983.180 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:36:27.637Z,1509438987.637 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:36:27.637Z,1509438987.637 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T08:36:27.637Z,1509438987.637 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:36:27.651Z,1509438987.651 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:36:28.053Z,1509438988.053 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:36:28.053Z,1509438988.053 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T08:36:28.436Z,1509438988.436 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:36:28.436Z,1509438988.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:36:28.436Z,1509438988.436 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:36:36.004Z,1509438996.004 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T08:36:36.404Z,1509438996.404 [PNI_TCM](ERROR): CRC does not match. Expected:0x38403 got:0x16938
2017-10-31T08:36:37.609Z,1509438997.609 [PNI_TCM](ERROR): CRC does not match. Expected:0x33607 got:0x12056
2017-10-31T08:36:39.216Z,1509438999.216 [PNI_TCM](ERROR): CRC does not match. Expected:0x38731 got:0x0
2017-10-31T08:36:40.814Z,1509439000.814 [PNI_TCM](ERROR): CRC does not match. Expected:0x29408 got:0x7490
2017-10-31T08:36:44.018Z,1509439004.018 [PNI_TCM](ERROR): CRC does not match. Expected:0x27213 got:0x1857
2017-10-31T08:36:45.615Z,1509439005.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x39205 got:0x51875
2017-10-31T08:36:50.471Z,1509439010.471 [PNI_TCM](ERROR): CRC does not match. Expected:0x54461 got:0x6425
2017-10-31T08:36:50.472Z,1509439010.472 [PNI_TCM](ERROR): CRC does not match. Expected:0x34452 got:0x19737
2017-10-31T08:36:50.472Z,1509439010.472 [PNI_TCM](ERROR): CRC does not match. Expected:0x14203 got:0x33817
2017-10-31T08:36:50.472Z,1509439010.472 [PNI_TCM](ERROR): CRC does not match. Expected:0x16629 got:0x61977
2017-10-31T08:36:50.473Z,1509439010.473 [PNI_TCM](ERROR): CRC does not match. Expected:0x36199 got:0x13849
2017-10-31T08:36:50.473Z,1509439010.473 [PNI_TCM](ERROR): CRC does not match. Expected:0x31168 got:0x3353
2017-10-31T08:36:50.474Z,1509439010.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x55509 got:0x16409
2017-10-31T08:36:50.474Z,1509439010.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x17300 got:0x41241
2017-10-31T08:36:51.475Z,1509439011.475 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:37:02.226Z,1509439022.226 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134492
CHAN A1 (24V): -0.004188
CHAN A2 (12V): -0.002669
CHAN A3 (5V): 0.000035
CHAN B0 (3.3V): -0.000421
CHAN B1 (3.15aV): -0.000075
CHAN B2 (3.15bV): -0.000069
CHAN B3 (GND): -0.000422
OPEN: -0.000386
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:37:12.580Z,1509439032.580 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:37:12.580Z,1509439032.580 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:37:46.619Z,1509439066.619 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T08:32:46.4Z
2017-10-31T08:37:46.619Z,1509439066.619 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T08:37:46.619Z,1509439066.619 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T08:37:50.679Z,1509439070.679 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:37:50.679Z,1509439070.679 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:37:50.817Z,1509439070.817 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0252.lzma
2017-10-31T08:37:51.588Z,1509439071.588 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0252.lzma.bak
2017-10-31T08:37:51.589Z,1509439071.589 [DataOverHttps](INFO): SBD MOMSN=5178483
2017-10-31T08:37:55.704Z,1509439075.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x52497 got:0x44219
2017-10-31T08:37:55.704Z,1509439075.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x31872 got:0x2466
2017-10-31T08:37:55.704Z,1509439075.704 [PNI_TCM](ERROR): CRC does not match. Expected:0x45139 got:0x63110
2017-10-31T08:37:55.705Z,1509439075.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x27488 got:0x29972
2017-10-31T08:37:55.705Z,1509439075.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x17305 got:0x63411
2017-10-31T08:37:55.705Z,1509439075.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x841 got:0x55416
2017-10-31T08:37:55.706Z,1509439075.706 [PNI_TCM](ERROR): CRC does not match. Expected:0x25395 got:0x43915
2017-10-31T08:37:55.706Z,1509439075.706 [PNI_TCM](ERROR): CRC does not match. Expected:0x29779 got:0x60828
2017-10-31T08:38:01.041Z,1509439081.041 [DataOverHttps](INFO): Sending 556 bytes from file Logs/20171030T210256/Express0253.lzma
2017-10-31T08:38:01.817Z,1509439081.817 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0253.lzma.bak
2017-10-31T08:38:01.817Z,1509439081.817 [DataOverHttps](INFO): SBD MOMSN=5178485
2017-10-31T08:38:02.293Z,1509439082.293 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T08:38:02.293Z,1509439082.293 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T08:38:02.293Z,1509439082.293 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T08:38:05.963Z,1509439085.963 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T08:38:32.541Z,1509439112.541 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:38:36.470Z,1509439116.470 [NAL9602](INFO): Powering down
2017-10-31T08:38:43.357Z,1509439123.357 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002704
CHAN A1 (24V): -0.004010
CHAN A2 (12V): -0.002185
CHAN A3 (5V): 0.000211
CHAN B0 (3.3V): -0.000089
CHAN B1 (3.15aV): 0.000136
CHAN B2 (3.15bV): -0.000235
CHAN B3 (GND): -0.000068
OPEN: -0.000008
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:39:28.502Z,1509439168.502 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:39:28.503Z,1509439168.503 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T08:39:28.503Z,1509439168.503 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:39:28.518Z,1509439168.518 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:39:28.966Z,1509439168.966 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:39:28.966Z,1509439168.966 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T08:39:29.308Z,1509439169.308 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:39:29.308Z,1509439169.308 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:39:29.309Z,1509439169.309 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:40:13.519Z,1509439213.519 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:40:24.353Z,1509439224.353 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134298
CHAN A1 (24V): -0.004094
CHAN A2 (12V): -0.002151
CHAN A3 (5V): -0.000182
CHAN B0 (3.3V): 0.000084
CHAN B1 (3.15aV): 0.000142
CHAN B2 (3.15bV): -0.000763
CHAN B3 (GND): 0.000093
OPEN: -0.000233
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:40:59.071Z,1509439259.071 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:40:59.071Z,1509439259.071 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:40:59.071Z,1509439259.071 [BPC1](ERROR): Communications Fault
2017-10-31T08:40:59.118Z,1509439259.118 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:41:00.294Z,1509439260.294 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:41:00.294Z,1509439260.294 [BPC1] No Fault, FailCount= 1
2017-10-31T08:41:54.465Z,1509439314.465 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:42:07.291Z,1509439327.291 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003627
CHAN A1 (24V): -0.003573
CHAN A2 (12V): -0.002330
CHAN A3 (5V): 0.000436
CHAN B0 (3.3V): -0.000265
CHAN B1 (3.15aV): -0.000061
CHAN B2 (3.15bV): -0.000657
CHAN B3 (GND): -0.000550
OPEN: -0.000582
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:42:29.318Z,1509439349.318 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:42:29.318Z,1509439349.318 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T08:42:29.318Z,1509439349.318 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:42:29.342Z,1509439349.342 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:42:29.685Z,1509439349.685 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:42:29.685Z,1509439349.685 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T08:42:30.097Z,1509439350.097 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:42:30.098Z,1509439350.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:42:30.098Z,1509439350.098 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:43:02.861Z,1509439382.861 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T08:43:02.862Z,1509439382.862 [Default:CheckIn:C.Wait] Stopped
2017-10-31T08:43:02.862Z,1509439382.862 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T08:43:02.862Z,1509439382.862 [Default:CheckIn:D] Running Loop=1
2017-10-31T08:43:03.273Z,1509439383.273 [Default:CheckIn:D] Stopped
2017-10-31T08:43:03.273Z,1509439383.273 [Default:CheckIn:E] Running Loop=1
2017-10-31T08:43:03.672Z,1509439383.672 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 605.925977 min 
2017-10-31T08:43:03.672Z,1509439383.672 [Default:CheckIn:E] Stopped
2017-10-31T08:43:03.673Z,1509439383.673 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T08:43:03.673Z,1509439383.673 [Default:CheckIn] Stopped
2017-10-31T08:43:03.673Z,1509439383.673 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T08:43:03.673Z,1509439383.673 [Default:CheckIn](INFO): Running loop #55
2017-10-31T08:43:03.673Z,1509439383.673 [Default:CheckIn] Running Loop=55
2017-10-31T08:43:03.673Z,1509439383.673 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T08:43:03.673Z,1509439383.673 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T08:43:07.204Z,1509439387.204 [NAL9602](INFO): Powering up
2017-10-31T08:43:18.352Z,1509439398.352 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:43:19.153Z,1509439399.153 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T08:43:19.153Z,1509439399.153 [NAL9602] Data Fault, FailCount= 1
2017-10-31T08:43:19.153Z,1509439399.153 [NAL9602](ERROR): Data Fault
2017-10-31T08:43:19.234Z,1509439399.234 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T08:43:19.553Z,1509439399.553 [NAL9602](INFO): Powering down
2017-10-31T08:43:20.418Z,1509439400.418 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T08:43:20.419Z,1509439400.419 [NAL9602] No Fault, FailCount= 1
2017-10-31T08:43:25.637Z,1509439405.637 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T08:43:37.622Z,1509439417.622 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:43:48.415Z,1509439428.415 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135199
CHAN A1 (24V): -0.003374
CHAN A2 (12V): -0.001992
CHAN A3 (5V): 0.000383
CHAN B0 (3.3V): -0.000013
CHAN B1 (3.15aV): -0.000164
CHAN B2 (3.15bV): -0.000919
CHAN B3 (GND): -0.000092
OPEN: -0.000500
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:43:49.560Z,1509439429.560 [NAL9602](INFO): Powering up NAL9602
2017-10-31T08:44:00.354Z,1509439440.354 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:44:42.539Z,1509439482.539 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T08:44:42.539Z,1509439482.539 [BPC1] Data Fault, FailCount= 1
2017-10-31T08:44:42.539Z,1509439482.539 [BPC1](ERROR): Data Fault
2017-10-31T08:44:42.592Z,1509439482.592 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T08:44:43.765Z,1509439483.765 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:44:43.765Z,1509439483.765 [BPC1] No Fault, FailCount= 1
2017-10-31T08:45:09.631Z,1509439509.631 [PNI_TCM](ERROR): CRC does not match. Expected:0x33229 got:0x7490
2017-10-31T08:45:11.233Z,1509439511.233 [PNI_TCM](ERROR): CRC does not match. Expected:0x59219 got:0x43264
2017-10-31T08:45:18.486Z,1509439518.486 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:45:19.620Z,1509439519.620 [PNI_TCM](ERROR): CRC does not match. Expected:0x22104 got:0x49330
2017-10-31T08:45:29.326Z,1509439529.326 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003145
CHAN A1 (24V): -0.003907
CHAN A2 (12V): -0.002168
CHAN A3 (5V): 0.000345
CHAN B0 (3.3V): -0.000143
CHAN B1 (3.15aV): 0.000289
CHAN B2 (3.15bV): -0.000587
CHAN B3 (GND): 0.000212
OPEN: -0.000550
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:45:30.432Z,1509439530.432 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T08:45:30.476Z,1509439530.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:45:30.476Z,1509439530.476 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T08:45:30.476Z,1509439530.476 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:45:30.490Z,1509439530.490 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:45:30.880Z,1509439530.880 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:45:30.880Z,1509439530.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T08:45:31.252Z,1509439531.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:45:31.253Z,1509439531.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:45:31.253Z,1509439531.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:45:32.018Z,1509439532.018 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T08:45:32.437Z,1509439532.437 [PNI_TCM](ERROR): CRC does not match. Expected:0x50856 got:0x45735
2017-10-31T08:45:32.838Z,1509439532.838 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:45:32.838Z,1509439532.838 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:45:32.838Z,1509439532.838 [BPC1](ERROR): Communications Fault
2017-10-31T08:45:32.862Z,1509439532.862 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:45:34.063Z,1509439534.063 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:45:34.063Z,1509439534.063 [BPC1] No Fault, FailCount= 1
2017-10-31T08:45:38.430Z,1509439538.430 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T08:45:40.031Z,1509439540.031 [PNI_TCM](ERROR): CRC does not match. Expected:0x29103 got:0x35864
2017-10-31T08:45:41.633Z,1509439541.633 [PNI_TCM](ERROR): CRC does not match. Expected:0x61071 got:0x49330
2017-10-31T08:45:44.829Z,1509439544.829 [PNI_TCM](ERROR): CRC does not match. Expected:0x9221 got:0x16938
2017-10-31T08:45:46.438Z,1509439546.438 [PNI_TCM](ERROR): CRC does not match. Expected:0x10801 got:0x23833
2017-10-31T08:45:49.596Z,1509439549.596 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:45:49.596Z,1509439549.596 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:45:51.232Z,1509439551.232 [PNI_TCM](ERROR): CRC does not match. Expected:0x56388 got:0x7490
2017-10-31T08:45:52.831Z,1509439552.831 [PNI_TCM](ERROR): CRC does not match. Expected:0x38078 got:0x44629
2017-10-31T08:45:56.037Z,1509439556.037 [PNI_TCM](ERROR): CRC does not match. Expected:0x2782 got:0x30232
2017-10-31T08:46:04.033Z,1509439564.033 [PNI_TCM](ERROR): CRC does not match. Expected:0x24447 got:0x44625
2017-10-31T08:46:37.493Z,1509439597.493 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T08:46:37.493Z,1509439597.493 [BPC1] Data Fault, FailCount= 1
2017-10-31T08:46:37.493Z,1509439597.493 [BPC1](ERROR): Data Fault
2017-10-31T08:46:37.552Z,1509439597.552 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T08:46:38.734Z,1509439598.734 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:46:38.734Z,1509439598.734 [BPC1] No Fault, FailCount= 1
2017-10-31T08:46:59.531Z,1509439619.531 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:47:13.255Z,1509439633.255 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134624
CHAN A1 (24V): -0.003754
CHAN A2 (12V): -0.002280
CHAN A3 (5V): 0.000330
CHAN B0 (3.3V): -0.000022
CHAN B1 (3.15aV): 0.000242
CHAN B2 (3.15bV): -0.000676
CHAN B3 (GND): 0.000383
OPEN: -0.000573
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:47:18.789Z,1509439638.789 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:47:18.789Z,1509439638.789 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:47:32.425Z,1509439652.425 [PNI_TCM](ERROR): CRC does not match. Expected:0x29222 got:0x49073
2017-10-31T08:47:42.031Z,1509439662.031 [PNI_TCM](ERROR): CRC does not match. Expected:0x48743 got:0x6591
2017-10-31T08:48:04.037Z,1509439684.037 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T08:43:03.7Z
2017-10-31T08:48:04.037Z,1509439684.037 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T08:48:04.037Z,1509439684.037 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T08:48:08.189Z,1509439688.189 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0256.lzma
2017-10-31T08:48:08.960Z,1509439688.960 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0256.lzma.bak
2017-10-31T08:48:08.961Z,1509439688.961 [DataOverHttps](INFO): SBD MOMSN=5178500
2017-10-31T08:48:09.008Z,1509439689.008 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:48:09.008Z,1509439689.008 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:48:09.008Z,1509439689.008 [BPC1](ERROR): Communications Fault
2017-10-31T08:48:09.068Z,1509439689.068 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:48:13.313Z,1509439693.313 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:48:13.313Z,1509439693.313 [BPC1] No Fault, FailCount= 1
2017-10-31T08:48:18.466Z,1509439698.466 [DataOverHttps](INFO): Sending 643 bytes from file Logs/20171030T210256/Express0257.lzma
2017-10-31T08:48:19.233Z,1509439699.233 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0257.lzma.bak
2017-10-31T08:48:19.233Z,1509439699.233 [DataOverHttps](INFO): SBD MOMSN=5178502
2017-10-31T08:48:19.721Z,1509439699.721 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T08:48:19.722Z,1509439699.722 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T08:48:19.722Z,1509439699.722 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T08:48:31.499Z,1509439711.499 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:48:31.499Z,1509439711.499 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T08:48:31.499Z,1509439711.499 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:48:31.537Z,1509439711.537 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:48:31.902Z,1509439711.902 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:48:31.902Z,1509439711.902 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T08:48:32.271Z,1509439712.271 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:48:32.272Z,1509439712.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:48:32.272Z,1509439712.272 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:48:43.478Z,1509439723.478 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:48:54.307Z,1509439734.307 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002869
CHAN A1 (24V): -0.004489
CHAN A2 (12V): -0.001921
CHAN A3 (5V): 0.000018
CHAN B0 (3.3V): -0.000022
CHAN B1 (3.15aV): -0.000610
CHAN B2 (3.15bV): 0.000181
CHAN B3 (GND): -0.000371
OPEN: -0.000573
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:49:03.419Z,1509439743.419 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T08:49:34.080Z,1509439774.080 [NAL9602](INFO): Powering down
2017-10-31T08:50:24.517Z,1509439824.517 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:50:35.329Z,1509439835.329 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002886
CHAN A1 (24V): -0.004221
CHAN A2 (12V): -0.002086
CHAN A3 (5V): -0.000152
CHAN B0 (3.3V): -0.000034
CHAN B1 (3.15aV): -0.000095
CHAN B2 (3.15bV): -0.000338
CHAN B3 (GND): -0.000386
OPEN: -0.000473
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:51:32.669Z,1509439892.669 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:51:32.669Z,1509439892.669 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T08:51:32.669Z,1509439892.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:51:32.693Z,1509439892.693 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:51:33.086Z,1509439893.086 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:51:33.086Z,1509439893.086 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T08:51:33.465Z,1509439893.465 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:51:33.465Z,1509439893.465 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:51:33.466Z,1509439893.466 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:51:57.830Z,1509439917.830 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T08:51:57.830Z,1509439917.830 [BPC1] Data Fault, FailCount= 1
2017-10-31T08:51:57.830Z,1509439917.830 [BPC1](ERROR): Data Fault
2017-10-31T08:51:57.878Z,1509439917.878 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T08:51:59.082Z,1509439919.082 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:51:59.082Z,1509439919.082 [BPC1] No Fault, FailCount= 1
2017-10-31T08:52:05.468Z,1509439925.468 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:52:16.264Z,1509439936.264 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135386
CHAN A1 (24V): -0.003379
CHAN A2 (12V): -0.002050
CHAN A3 (5V): 0.000161
CHAN B0 (3.3V): -0.000177
CHAN B1 (3.15aV): -0.000505
CHAN B2 (3.15bV): -0.000170
CHAN B3 (GND): 0.000403
OPEN: -0.000267
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:53:20.290Z,1509440000.290 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T08:53:20.291Z,1509440000.291 [Default:CheckIn:C.Wait] Stopped
2017-10-31T08:53:20.291Z,1509440000.291 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T08:53:20.291Z,1509440000.291 [Default:CheckIn:D] Running Loop=1
2017-10-31T08:53:20.665Z,1509440000.665 [Default:CheckIn:D] Stopped
2017-10-31T08:53:20.665Z,1509440000.665 [Default:CheckIn:E] Running Loop=1
2017-10-31T08:53:21.070Z,1509440001.070 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 616.215820 min 
2017-10-31T08:53:21.070Z,1509440001.070 [Default:CheckIn:E] Stopped
2017-10-31T08:53:21.070Z,1509440001.070 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T08:53:21.070Z,1509440001.070 [Default:CheckIn] Stopped
2017-10-31T08:53:21.070Z,1509440001.070 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T08:53:21.071Z,1509440001.071 [Default:CheckIn](INFO): Running loop #56
2017-10-31T08:53:21.071Z,1509440001.071 [Default:CheckIn] Running Loop=56
2017-10-31T08:53:21.071Z,1509440001.071 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T08:53:21.071Z,1509440001.071 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T08:53:24.559Z,1509440004.559 [NAL9602](INFO): Powering up
2017-10-31T08:53:25.762Z,1509440005.762 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T08:53:35.696Z,1509440015.696 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:53:46.554Z,1509440026.554 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:53:57.388Z,1509440037.388 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003184
CHAN A1 (24V): -0.003915
CHAN A2 (12V): -0.001880
CHAN A3 (5V): 0.000362
CHAN B0 (3.3V): -0.000384
CHAN B1 (3.15aV): 0.000151
CHAN B2 (3.15bV): -0.000329
CHAN B3 (GND): -0.000347
OPEN: -0.000353
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:54:07.694Z,1509440047.694 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T08:54:07.777Z,1509440047.777 [NAL9602](FAULT): received: 
+CSQ:0

OK21, 2, 0, 0, 0

OK
2017-10-31T08:54:07.777Z,1509440047.777 [NAL9602] Data Fault, FailCount= 2
2017-10-31T08:54:07.777Z,1509440047.777 [NAL9602](ERROR): Data Fault
2017-10-31T08:54:07.864Z,1509440047.864 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T08:54:08.101Z,1509440048.101 [NAL9602](INFO): Powering down
2017-10-31T08:54:08.971Z,1509440048.971 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T08:54:08.971Z,1509440048.971 [NAL9602] No Fault, FailCount= 2
2017-10-31T08:54:33.645Z,1509440073.645 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:54:33.645Z,1509440073.645 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T08:54:33.645Z,1509440073.645 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:54:33.670Z,1509440073.670 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:54:34.062Z,1509440074.062 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:54:34.062Z,1509440074.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T08:54:34.447Z,1509440074.447 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:54:34.447Z,1509440074.447 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:54:34.448Z,1509440074.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:54:38.388Z,1509440078.388 [NAL9602](INFO): Powering up NAL9602
2017-10-31T08:54:49.188Z,1509440089.188 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:54:49.989Z,1509440089.989 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T08:54:49.989Z,1509440089.989 [NAL9602] Data Fault, FailCount= 3
2017-10-31T08:54:49.990Z,1509440089.990 [NAL9602](ERROR): Data Fault
2017-10-31T08:54:50.085Z,1509440090.085 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T08:54:50.390Z,1509440090.390 [NAL9602](INFO): Powering down
2017-10-31T08:54:51.262Z,1509440091.262 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T08:54:51.262Z,1509440091.262 [NAL9602] No Fault, FailCount= 3
2017-10-31T08:55:20.794Z,1509440120.794 [NAL9602](INFO): Powering up NAL9602
2017-10-31T08:55:25.454Z,1509440125.454 [BPC1](ERROR): Failed to receive battery data
2017-10-31T08:55:25.454Z,1509440125.454 [BPC1] Communications Fault, FailCount= 1
2017-10-31T08:55:25.454Z,1509440125.454 [BPC1](ERROR): Communications Fault
2017-10-31T08:55:25.477Z,1509440125.477 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T08:55:26.703Z,1509440126.703 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:55:26.703Z,1509440126.703 [BPC1] No Fault, FailCount= 1
2017-10-31T08:55:27.489Z,1509440127.489 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:55:31.813Z,1509440131.813 [NAL9602](INFO): NAL9602 initialized
2017-10-31T08:55:38.301Z,1509440138.301 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133686
CHAN A1 (24V): -0.004668
CHAN A2 (12V): -0.002413
CHAN A3 (5V): -0.000003
CHAN B0 (3.3V): -0.000162
CHAN B1 (3.15aV): 0.000411
CHAN B2 (3.15bV): -0.000184
CHAN B3 (GND): -0.000298
OPEN: -0.000656
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:55:57.413Z,1509440157.413 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:55:57.413Z,1509440157.413 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:56:14.620Z,1509440174.620 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:56:14.620Z,1509440174.620 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:56:32.046Z,1509440192.046 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:56:32.046Z,1509440192.046 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:56:51.288Z,1509440211.288 [BPC1](ERROR): Failed to parse message.
2017-10-31T08:56:51.288Z,1509440211.288 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T08:56:51.288Z,1509440211.288 [BPC1] Data Fault, FailCount= 1
2017-10-31T08:56:51.288Z,1509440211.288 [BPC1](ERROR): Data Fault
2017-10-31T08:56:51.311Z,1509440211.311 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T08:56:52.517Z,1509440212.517 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T08:56:52.517Z,1509440212.517 [BPC1] No Fault, FailCount= 1
2017-10-31T08:57:08.505Z,1509440228.505 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:57:15.240Z,1509440235.240 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T08:57:15.240Z,1509440235.240 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T08:57:19.305Z,1509440239.305 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002488
CHAN A1 (24V): -0.003373
CHAN A2 (12V): -0.002117
CHAN A3 (5V): 0.000145
CHAN B0 (3.3V): -0.000242
CHAN B1 (3.15aV): -0.000529
CHAN B2 (3.15bV): -0.000669
CHAN B3 (GND): 0.000261
OPEN: -0.000112
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:57:34.765Z,1509440254.765 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T08:57:34.765Z,1509440254.765 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T08:57:34.765Z,1509440254.765 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T08:57:34.779Z,1509440254.779 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T08:57:35.202Z,1509440255.202 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T08:57:35.202Z,1509440255.202 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T08:57:35.585Z,1509440255.585 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T08:57:35.590Z,1509440255.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T08:57:35.590Z,1509440255.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T08:58:21.170Z,1509440301.170 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T08:53:21.1Z
2017-10-31T08:58:21.171Z,1509440301.171 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T08:58:21.171Z,1509440301.171 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T08:58:27.615Z,1509440307.615 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0260.lzma
2017-10-31T08:58:28.360Z,1509440308.360 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0260.lzma.bak
2017-10-31T08:58:28.360Z,1509440308.360 [DataOverHttps](INFO): SBD MOMSN=5178519
2017-10-31T08:58:37.681Z,1509440317.681 [DataOverHttps](INFO): Sending 681 bytes from file Logs/20171030T210256/Express0261.lzma
2017-10-31T08:58:38.448Z,1509440318.448 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0261.lzma.bak
2017-10-31T08:58:38.448Z,1509440318.448 [DataOverHttps](INFO): SBD MOMSN=5178521
2017-10-31T08:58:38.878Z,1509440318.878 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T08:58:38.934Z,1509440318.934 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T08:58:38.934Z,1509440318.934 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T08:58:38.934Z,1509440318.934 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T08:58:49.498Z,1509440329.498 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T08:59:00.306Z,1509440340.306 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134289
CHAN A1 (24V): -0.004742
CHAN A2 (12V): -0.002274
CHAN A3 (5V): 0.000159
CHAN B0 (3.3V): 0.000104
CHAN B1 (3.15aV): -0.000520
CHAN B2 (3.15bV): 0.000430
CHAN B3 (GND): -0.000307
OPEN: -0.000526
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T08:59:09.439Z,1509440349.439 [NAL9602](INFO): Powering down
2017-10-31T09:00:30.478Z,1509440430.478 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:00:35.644Z,1509440435.644 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:00:35.644Z,1509440435.644 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T09:00:35.644Z,1509440435.644 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:00:35.679Z,1509440435.679 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:00:36.101Z,1509440436.101 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:00:36.101Z,1509440436.101 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T09:00:36.450Z,1509440436.450 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:00:36.451Z,1509440436.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:00:36.451Z,1509440436.451 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:00:43.228Z,1509440443.228 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003381
CHAN A1 (24V): -0.004073
CHAN A2 (12V): -0.001974
CHAN A3 (5V): 0.000518
CHAN B0 (3.3V): -0.000421
CHAN B1 (3.15aV): -0.000172
CHAN B2 (3.15bV): -0.000204
CHAN B3 (GND): 0.000180
OPEN: -0.000424
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:02:13.577Z,1509440533.577 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:02:24.372Z,1509440544.372 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134907
CHAN A1 (24V): -0.003447
CHAN A2 (12V): -0.002183
CHAN A3 (5V): 0.000323
CHAN B0 (3.3V): -0.000198
CHAN B1 (3.15aV): -0.000461
CHAN B2 (3.15bV): 0.000146
CHAN B3 (GND): 0.000185
OPEN: -0.000462
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:03:26.128Z,1509440606.128 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T09:03:36.560Z,1509440616.560 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:03:36.561Z,1509440616.561 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T09:03:36.561Z,1509440616.561 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:03:36.574Z,1509440616.574 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:03:36.943Z,1509440616.943 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:03:36.943Z,1509440616.943 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T09:03:37.341Z,1509440617.341 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:03:37.341Z,1509440617.341 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:03:37.342Z,1509440617.342 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:03:39.347Z,1509440619.347 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T09:03:39.347Z,1509440619.347 [Default:CheckIn:C.Wait] Stopped
2017-10-31T09:03:39.347Z,1509440619.347 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T09:03:39.347Z,1509440619.347 [Default:CheckIn:D] Running Loop=1
2017-10-31T09:03:39.744Z,1509440619.744 [Default:CheckIn:D] Stopped
2017-10-31T09:03:39.744Z,1509440619.744 [Default:CheckIn:E] Running Loop=1
2017-10-31T09:03:40.117Z,1509440620.117 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 626.533854 min 
2017-10-31T09:03:40.117Z,1509440620.117 [Default:CheckIn:E] Stopped
2017-10-31T09:03:40.117Z,1509440620.117 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T09:03:40.117Z,1509440620.117 [Default:CheckIn] Stopped
2017-10-31T09:03:40.117Z,1509440620.117 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T09:03:40.117Z,1509440620.117 [Default:CheckIn](INFO): Running loop #57
2017-10-31T09:03:40.117Z,1509440620.117 [Default:CheckIn] Running Loop=57
2017-10-31T09:03:40.118Z,1509440620.118 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T09:03:40.118Z,1509440620.118 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T09:03:43.742Z,1509440623.742 [NAL9602](INFO): Powering up
2017-10-31T09:03:54.656Z,1509440634.656 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:03:54.753Z,1509440634.753 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:04:05.526Z,1509440645.526 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002986
CHAN A1 (24V): -0.004177
CHAN A2 (12V): -0.002157
CHAN A3 (5V): -0.000412
CHAN B0 (3.3V): -0.000331
CHAN B1 (3.15aV): 0.000127
CHAN B2 (3.15bV): -0.000220
CHAN B3 (GND): -0.000478
OPEN: -0.000429
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:04:26.647Z,1509440666.647 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T09:04:26.720Z,1509440666.720 [NAL9602](FAULT): received: 
+CSQ:0

OK21, 2, 0, 0, 0

OK
2017-10-31T09:04:26.720Z,1509440666.720 [NAL9602] Data Fault, FailCount= 4
2017-10-31T09:04:26.720Z,1509440666.720 [NAL9602](ERROR): Data Fault
2017-10-31T09:04:26.805Z,1509440666.805 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T09:04:27.050Z,1509440667.050 [NAL9602](INFO): Powering down
2017-10-31T09:04:27.916Z,1509440667.916 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T09:04:27.916Z,1509440667.916 [NAL9602] No Fault, FailCount= 4
2017-10-31T09:04:57.079Z,1509440697.079 [NAL9602](INFO): Powering up NAL9602
2017-10-31T09:05:07.882Z,1509440707.882 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:05:09.535Z,1509440709.535 [BPC1](ERROR): Failed to receive battery data
2017-10-31T09:05:09.535Z,1509440709.535 [BPC1] Communications Fault, FailCount= 1
2017-10-31T09:05:09.535Z,1509440709.535 [BPC1](ERROR): Communications Fault
2017-10-31T09:05:09.564Z,1509440709.564 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T09:05:10.775Z,1509440710.774 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:05:10.775Z,1509440710.775 [BPC1] No Fault, FailCount= 1
2017-10-31T09:05:35.613Z,1509440735.613 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:05:44.910Z,1509440744.910 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T09:05:44.911Z,1509440744.911 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T09:05:49.381Z,1509440749.381 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134701
CHAN A1 (24V): -0.003871
CHAN A2 (12V): -0.001979
CHAN A3 (5V): 0.000100
CHAN B0 (3.3V): -0.000210
CHAN B1 (3.15aV): -0.000426
CHAN B2 (3.15bV): -0.000387
CHAN B3 (GND): -0.000401
OPEN: -0.000409
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:06:37.367Z,1509440797.367 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:06:37.367Z,1509440797.367 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T09:06:37.367Z,1509440797.367 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:06:37.393Z,1509440797.393 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:06:37.778Z,1509440797.778 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:06:37.778Z,1509440797.778 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T09:06:38.156Z,1509440798.156 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:06:38.156Z,1509440798.156 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:06:38.157Z,1509440798.157 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:07:15.463Z,1509440835.463 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T09:07:15.463Z,1509440835.463 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T09:07:19.562Z,1509440839.562 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:07:30.356Z,1509440850.356 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002291
CHAN A1 (24V): -0.004515
CHAN A2 (12V): -0.002064
CHAN A3 (5V): -0.000159
CHAN B0 (3.3V): -0.000366
CHAN B1 (3.15aV): -0.000487
CHAN B2 (3.15bV): 0.000152
CHAN B3 (GND): 0.000188
OPEN: -0.000301
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:07:32.300Z,1509440852.300 [BPC1](ERROR): Failed to receive battery data
2017-10-31T09:07:32.300Z,1509440852.300 [BPC1] Communications Fault, FailCount= 1
2017-10-31T09:07:32.301Z,1509440852.301 [BPC1](ERROR): Communications Fault
2017-10-31T09:07:32.325Z,1509440852.325 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T09:07:33.541Z,1509440853.541 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:07:33.541Z,1509440853.541 [BPC1] No Fault, FailCount= 1
2017-10-31T09:07:41.070Z,1509440861.070 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T09:07:41.070Z,1509440861.070 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T09:08:19.759Z,1509440899.759 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T09:08:19.759Z,1509440899.759 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T09:08:40.197Z,1509440920.197 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T09:03:40.1Z
2017-10-31T09:08:40.197Z,1509440920.197 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T09:08:40.198Z,1509440920.198 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T09:08:44.972Z,1509440924.972 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0264.lzma
2017-10-31T09:08:45.732Z,1509440925.732 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0264.lzma.bak
2017-10-31T09:08:45.732Z,1509440925.732 [DataOverHttps](INFO): SBD MOMSN=5178539
2017-10-31T09:08:54.914Z,1509440934.914 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T09:08:54.915Z,1509440934.915 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T09:08:55.082Z,1509440935.082 [DataOverHttps](INFO): Sending 675 bytes from file Logs/20171030T210256/Express0265.lzma
2017-10-31T09:08:55.824Z,1509440935.824 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0265.lzma.bak
2017-10-31T09:08:55.824Z,1509440935.824 [DataOverHttps](INFO): SBD MOMSN=5178541
2017-10-31T09:08:56.309Z,1509440936.309 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T09:08:56.309Z,1509440936.309 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T09:08:56.309Z,1509440936.309 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T09:08:59.893Z,1509440939.893 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T09:09:00.492Z,1509440940.492 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:09:11.283Z,1509440951.283 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002691
CHAN A1 (24V): -0.004162
CHAN A2 (12V): -0.002433
CHAN A3 (5V): 0.000189
CHAN B0 (3.3V): -0.000033
CHAN B1 (3.15aV): -0.000002
CHAN B2 (3.15bV): -0.000637
CHAN B3 (GND): 0.000124
OPEN: -0.000670
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:09:27.232Z,1509440967.232 [BPC1](ERROR): Failed to parse message.
2017-10-31T09:09:27.232Z,1509440967.232 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T09:09:27.233Z,1509440967.233 [BPC1] Data Fault, FailCount= 1
2017-10-31T09:09:27.233Z,1509440967.233 [BPC1](ERROR): Data Fault
2017-10-31T09:09:27.294Z,1509440967.294 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T09:09:28.456Z,1509440968.456 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:09:28.456Z,1509440968.456 [BPC1] No Fault, FailCount= 1
2017-10-31T09:09:30.401Z,1509440970.401 [NAL9602](INFO): Powering down
2017-10-31T09:09:38.454Z,1509440978.454 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:09:38.454Z,1509440978.454 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T09:09:38.454Z,1509440978.454 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:09:38.486Z,1509440978.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:09:38.879Z,1509440978.879 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:09:38.880Z,1509440978.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T09:09:39.241Z,1509440979.241 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:09:39.242Z,1509440979.242 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:09:39.242Z,1509440979.242 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:10:41.458Z,1509441041.458 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:10:52.282Z,1509441052.282 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134930
CHAN A1 (24V): -0.003232
CHAN A2 (12V): -0.002294
CHAN A3 (5V): 0.000236
CHAN B0 (3.3V): 0.000134
CHAN B1 (3.15aV): -0.000876
CHAN B2 (3.15bV): -0.000382
CHAN B3 (GND): -0.000092
OPEN: -0.000045
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:11:04.880Z,1509441064.880 [PNI_TCM](ERROR): CRC does not match. Expected:0x29241 got:0x16938
2017-10-31T09:11:08.083Z,1509441068.083 [PNI_TCM](ERROR): CRC does not match. Expected:0x31444 got:0x62491
2017-10-31T09:11:12.883Z,1509441072.883 [PNI_TCM](ERROR): CRC does not match. Expected:0x462 got:0x45416
2017-10-31T09:11:14.480Z,1509441074.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x14171 got:0x6978
2017-10-31T09:11:16.084Z,1509441076.084 [PNI_TCM](ERROR): CRC does not match. Expected:0x40358 got:0x6978
2017-10-31T09:11:24.085Z,1509441084.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x34584 got:0x1857
2017-10-31T09:11:35.299Z,1509441095.299 [PNI_TCM](ERROR): CRC does not match. Expected:0x43920 got:0x21956
2017-10-31T09:11:36.883Z,1509441096.883 [PNI_TCM](ERROR): CRC does not match. Expected:0x9025 got:0x49330
2017-10-31T09:11:38.485Z,1509441098.485 [PNI_TCM](ERROR): CRC does not match. Expected:0x27681 got:0x24839
2017-10-31T09:11:40.083Z,1509441100.083 [PNI_TCM](ERROR): CRC does not match. Expected:0x32299 got:0x40987
2017-10-31T09:11:49.679Z,1509441109.679 [PNI_TCM](ERROR): CRC does not match. Expected:0x11533 got:0x32723
2017-10-31T09:12:00.615Z,1509441120.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x47209 got:0x20354
2017-10-31T09:12:00.615Z,1509441120.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x36102 got:0x35703
2017-10-31T09:12:00.615Z,1509441120.615 [PNI_TCM](ERROR): CRC does not match. Expected:0x59137 got:0x10102
2017-10-31T09:12:00.616Z,1509441120.616 [PNI_TCM](ERROR): CRC does not match. Expected:0x30766 got:0x34938
2017-10-31T09:12:00.616Z,1509441120.616 [PNI_TCM](ERROR): CRC does not match. Expected:0x52450 got:0x55223
2017-10-31T09:12:00.617Z,1509441120.617 [PNI_TCM](ERROR): CRC does not match. Expected:0x12384 got:0x10413
2017-10-31T09:12:00.617Z,1509441120.617 [PNI_TCM](ERROR): CRC does not match. Expected:0x46697 got:0x12248
2017-10-31T09:12:00.617Z,1509441120.617 [PNI_TCM](ERROR): CRC does not match. Expected:0x37924 got:0x7599
2017-10-31T09:12:22.380Z,1509441142.380 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:12:33.198Z,1509441153.198 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003162
CHAN A1 (24V): -0.004341
CHAN A2 (12V): -0.001901
CHAN A3 (5V): 0.000683
CHAN B0 (3.3V): -0.000013
CHAN B1 (3.15aV): -0.000285
CHAN B2 (3.15bV): -0.000849
CHAN B3 (GND): 0.000729
OPEN: -0.000307
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:12:39.566Z,1509441159.566 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:12:39.566Z,1509441159.566 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T09:12:39.566Z,1509441159.566 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:12:39.579Z,1509441159.579 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:12:39.978Z,1509441159.978 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:12:39.978Z,1509441159.978 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T09:12:40.366Z,1509441160.366 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:12:40.366Z,1509441160.366 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:12:40.367Z,1509441160.367 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:12:51.185Z,1509441171.185 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T09:12:51.185Z,1509441171.185 [BPC1] Data Fault, FailCount= 1
2017-10-31T09:12:51.185Z,1509441171.185 [BPC1](ERROR): Data Fault
2017-10-31T09:12:51.239Z,1509441171.239 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T09:12:52.378Z,1509441172.378 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:12:52.378Z,1509441172.378 [BPC1] No Fault, FailCount= 1
2017-10-31T09:13:26.154Z,1509441206.154 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T09:13:56.948Z,1509441236.948 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T09:13:56.948Z,1509441236.948 [Default:CheckIn:C.Wait] Stopped
2017-10-31T09:13:56.949Z,1509441236.949 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T09:13:56.949Z,1509441236.949 [Default:CheckIn:D] Running Loop=1
2017-10-31T09:13:57.385Z,1509441237.385 [Default:CheckIn:D] Stopped
2017-10-31T09:13:57.385Z,1509441237.385 [Default:CheckIn:E] Running Loop=1
2017-10-31T09:13:57.734Z,1509441237.734 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 636.827865 min 
2017-10-31T09:13:57.734Z,1509441237.734 [Default:CheckIn:E] Stopped
2017-10-31T09:13:57.735Z,1509441237.735 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T09:13:57.735Z,1509441237.735 [Default:CheckIn] Stopped
2017-10-31T09:13:57.735Z,1509441237.735 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T09:13:57.735Z,1509441237.735 [Default:CheckIn](INFO): Running loop #58
2017-10-31T09:13:57.735Z,1509441237.735 [Default:CheckIn] Running Loop=58
2017-10-31T09:13:57.735Z,1509441237.735 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T09:13:57.735Z,1509441237.735 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T09:14:01.106Z,1509441241.106 [NAL9602](INFO): Powering up
2017-10-31T09:14:03.529Z,1509441243.529 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:14:12.247Z,1509441252.247 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:14:13.046Z,1509441253.046 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T09:14:13.046Z,1509441253.046 [NAL9602] Data Fault, FailCount= 5
2017-10-31T09:14:13.046Z,1509441253.046 [NAL9602](ERROR): Data Fault
2017-10-31T09:14:13.141Z,1509441253.141 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T09:14:13.141Z,1509441253.141 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T09:14:13.445Z,1509441253.445 [NAL9602](INFO): Powering down
2017-10-31T09:14:13.534Z,1509441253.534 [CBIT](INFO): Critical error at 20171031T091413
2017-10-31T09:14:14.308Z,1509441254.308 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133932
CHAN A1 (24V): -0.004597
CHAN A2 (12V): -0.002123
CHAN A3 (5V): -0.000003
CHAN B0 (3.3V): 0.000116
CHAN B1 (3.15aV): -0.000544
CHAN B2 (3.15bV): -0.000148
CHAN B3 (GND): -0.000121
OPEN: -0.000460
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:15:05.764Z,1509441305.764 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T09:15:05.764Z,1509441305.764 [BPC1] Data Fault, FailCount= 1
2017-10-31T09:15:05.765Z,1509441305.765 [BPC1](ERROR): Data Fault
2017-10-31T09:15:05.805Z,1509441305.805 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T09:15:06.991Z,1509441306.991 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:15:06.991Z,1509441306.991 [BPC1] No Fault, FailCount= 1
2017-10-31T09:15:26.980Z,1509441326.980 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T09:15:26.980Z,1509441326.980 [BPC1] Data Fault, FailCount= 2
2017-10-31T09:15:26.980Z,1509441326.980 [BPC1](ERROR): Data Fault
2017-10-31T09:15:27.060Z,1509441327.060 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T09:15:28.190Z,1509441328.190 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:15:28.190Z,1509441328.190 [BPC1] No Fault, FailCount= 2
2017-10-31T09:15:40.576Z,1509441340.576 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:15:40.576Z,1509441340.576 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T09:15:40.576Z,1509441340.576 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:15:40.590Z,1509441340.590 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:15:40.992Z,1509441340.992 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:15:40.992Z,1509441340.992 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T09:15:41.383Z,1509441341.383 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:15:41.383Z,1509441341.383 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:15:41.384Z,1509441341.384 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:15:44.596Z,1509441344.596 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:15:55.385Z,1509441355.385 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003910
CHAN A1 (24V): -0.003103
CHAN A2 (12V): -0.001953
CHAN A3 (5V): -0.000123
CHAN B0 (3.3V): -0.000425
CHAN B1 (3.15aV): -0.000054
CHAN B2 (3.15bV): 0.000101
CHAN B3 (GND): -0.000157
OPEN: -0.000403
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:16:13.434Z,1509441373.434 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T09:16:13.434Z,1509441373.434 [NAL9602] No Fault, FailCount= 5
2017-10-31T09:16:13.731Z,1509441373.731 [NAL9602](INFO): Powering up NAL9602
2017-10-31T09:16:24.964Z,1509441384.964 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:16:42.538Z,1509441402.538 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T09:16:42.538Z,1509441402.538 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T09:17:12.705Z,1509441432.705 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T09:17:12.706Z,1509441432.706 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T09:17:25.586Z,1509441445.586 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:17:36.466Z,1509441456.466 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134600
CHAN A1 (24V): -0.003985
CHAN A2 (12V): -0.002357
CHAN A3 (5V): 0.000377
CHAN B0 (3.3V): -0.000212
CHAN B1 (3.15aV): -0.000340
CHAN B2 (3.15bV): -0.000008
CHAN B3 (GND): 0.000550
OPEN: -0.000442
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:18:23.717Z,1509441503.717 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T09:18:23.717Z,1509441503.717 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T09:18:41.765Z,1509441521.765 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:18:41.766Z,1509441521.766 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T09:18:41.766Z,1509441521.766 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:18:41.812Z,1509441521.812 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:18:42.201Z,1509441522.201 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:18:42.201Z,1509441522.201 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T09:18:42.572Z,1509441522.572 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:18:42.572Z,1509441522.572 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:18:42.572Z,1509441522.572 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:18:57.791Z,1509441537.791 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T09:13:57.7Z
2017-10-31T09:18:57.791Z,1509441537.791 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T09:18:57.792Z,1509441537.792 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T09:19:02.381Z,1509441542.381 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171030T210256/Courier0268.lzma
2017-10-31T09:19:03.152Z,1509441543.152 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0268.lzma.bak
2017-10-31T09:19:03.153Z,1509441543.153 [DataOverHttps](INFO): SBD MOMSN=5178558
2017-10-31T09:19:07.316Z,1509441547.316 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:19:12.432Z,1509441552.432 [DataOverHttps](INFO): Sending 634 bytes from file Logs/20171030T210256/Express0269.lzma
2017-10-31T09:19:13.236Z,1509441553.236 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0269.lzma.bak
2017-10-31T09:19:13.236Z,1509441553.236 [DataOverHttps](INFO): SBD MOMSN=5178561
2017-10-31T09:19:13.729Z,1509441553.729 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T09:19:13.729Z,1509441553.729 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T09:19:13.729Z,1509441553.729 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T09:19:22.799Z,1509441562.799 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002293
CHAN A1 (24V): -0.004294
CHAN A2 (12V): -0.002463
CHAN A3 (5V): 0.000421
CHAN B0 (3.3V): -0.000177
CHAN B1 (3.15aV): 0.000060
CHAN B2 (3.15bV): -0.000470
CHAN B3 (GND): -0.000210
OPEN: -0.000544
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:20:53.002Z,1509441653.002 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:21:03.784Z,1509441663.784 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002364
CHAN A1 (24V): -0.004507
CHAN A2 (12V): -0.001926
CHAN A3 (5V): 0.000624
CHAN B0 (3.3V): 0.000066
CHAN B1 (3.15aV): -0.000395
CHAN B2 (3.15bV): -0.000328
CHAN B3 (GND): 0.000608
OPEN: -0.000556
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:21:27.475Z,1509441687.475 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T09:21:42.709Z,1509441702.709 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:21:42.709Z,1509441702.709 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T09:21:42.709Z,1509441702.709 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:21:42.767Z,1509441702.767 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:21:43.185Z,1509441703.185 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:21:43.186Z,1509441703.186 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T09:21:43.518Z,1509441703.518 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:21:43.518Z,1509441703.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:21:43.518Z,1509441703.518 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:21:58.279Z,1509441718.279 [NAL9602](INFO): Powering down
2017-10-31T09:22:33.902Z,1509441753.902 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:22:44.708Z,1509441764.708 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135068
CHAN A1 (24V): -0.003957
CHAN A2 (12V): -0.001744
CHAN A3 (5V): 0.000211
CHAN B0 (3.3V): -0.000242
CHAN B1 (3.15aV): 0.000248
CHAN B2 (3.15bV): 0.000025
CHAN B3 (GND): -0.000391
OPEN: -0.000462
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:23:26.334Z,1509441806.334 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T09:24:14.296Z,1509441854.296 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T09:24:14.297Z,1509441854.297 [Default:CheckIn:C.Wait] Stopped
2017-10-31T09:24:14.297Z,1509441854.297 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T09:24:14.297Z,1509441854.297 [Default:CheckIn:D] Running Loop=1
2017-10-31T09:24:14.710Z,1509441854.710 [Default:CheckIn:D] Stopped
2017-10-31T09:24:14.710Z,1509441854.710 [Default:CheckIn:E] Running Loop=1
2017-10-31T09:24:14.729Z,1509441854.729 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:24:15.105Z,1509441855.105 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 647.116602 min 
2017-10-31T09:24:15.105Z,1509441855.105 [Default:CheckIn:E] Stopped
2017-10-31T09:24:15.105Z,1509441855.105 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T09:24:15.105Z,1509441855.105 [Default:CheckIn] Stopped
2017-10-31T09:24:15.105Z,1509441855.105 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T09:24:15.106Z,1509441855.106 [Default:CheckIn](INFO): Running loop #59
2017-10-31T09:24:15.106Z,1509441855.106 [Default:CheckIn] Running Loop=59
2017-10-31T09:24:15.106Z,1509441855.106 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T09:24:15.106Z,1509441855.106 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T09:24:18.461Z,1509441858.461 [NAL9602](INFO): Powering up
2017-10-31T09:24:20.103Z,1509441860.103 [PNI_TCM](ERROR): CRC does not match. Expected:0x26062 got:0x40578
2017-10-31T09:24:24.904Z,1509441864.904 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T09:24:27.758Z,1509441867.758 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002827
CHAN A1 (24V): -0.003894
CHAN A2 (12V): -0.002251
CHAN A3 (5V): 0.000223
CHAN B0 (3.3V): 0.000187
CHAN B1 (3.15aV): -0.000243
CHAN B2 (3.15bV): -0.000496
CHAN B3 (GND): 0.000073
OPEN: -0.000282
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:24:29.267Z,1509441869.267 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:24:34.900Z,1509441874.900 [PNI_TCM](ERROR): CRC does not match. Expected:0x61429 got:0x40620
2017-10-31T09:24:43.728Z,1509441883.728 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:24:43.728Z,1509441883.728 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T09:24:43.728Z,1509441883.728 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:24:43.766Z,1509441883.766 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:24:44.133Z,1509441884.133 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:24:44.133Z,1509441884.133 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T09:24:44.514Z,1509441884.514 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:24:44.515Z,1509441884.515 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:24:44.515Z,1509441884.515 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:25:01.265Z,1509441901.265 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T09:25:01.348Z,1509441901.348 [NAL9602](FAULT): received: 
+CSQ:0

OK21, 2, 0, 0, 0

OK
2017-10-31T09:25:01.348Z,1509441901.348 [NAL9602] Data Fault, FailCount= 1
2017-10-31T09:25:01.348Z,1509441901.348 [NAL9602](ERROR): Data Fault
2017-10-31T09:25:01.445Z,1509441901.445 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T09:25:01.666Z,1509441901.666 [NAL9602](INFO): Powering down
2017-10-31T09:25:02.109Z,1509441902.109 [PNI_TCM](ERROR): CRC does not match. Expected:0x65060 got:0x49330
2017-10-31T09:25:02.532Z,1509441902.532 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T09:25:02.532Z,1509441902.532 [NAL9602] No Fault, FailCount= 1
2017-10-31T09:25:04.897Z,1509441904.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T09:25:05.294Z,1509441905.294 [PNI_TCM](ERROR): CRC does not match. Expected:0x59570 got:0x21985
2017-10-31T09:25:08.097Z,1509441908.097 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T09:25:08.498Z,1509441908.498 [PNI_TCM](ERROR): CRC does not match. Expected:0x25322 got:0x16981
2017-10-31T09:25:31.897Z,1509441931.897 [NAL9602](INFO): Powering up NAL9602
2017-10-31T09:25:43.101Z,1509441943.101 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:25:57.956Z,1509441957.956 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:26:08.767Z,1509441968.767 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135171
CHAN A1 (24V): -0.003715
CHAN A2 (12V): -0.002501
CHAN A3 (5V): 0.000320
CHAN B0 (3.3V): -0.000016
CHAN B1 (3.15aV): -0.000717
CHAN B2 (3.15bV): -0.000266
CHAN B3 (GND): 0.000043
OPEN: -0.000421
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:27:39.001Z,1509442059.001 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:27:44.556Z,1509442064.556 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:27:44.556Z,1509442064.556 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T09:27:44.556Z,1509442064.556 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:27:44.569Z,1509442064.569 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:27:44.570Z,1509442064.570 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:27:49.779Z,1509442069.779 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003536
CHAN A1 (24V): -0.004348
CHAN A2 (12V): -0.002141
CHAN A3 (5V): -0.000045
CHAN B0 (3.3V): -0.000636
CHAN B1 (3.15aV): -0.000175
CHAN B2 (3.15bV): -0.000117
CHAN B3 (GND): 0.000211
OPEN: -0.000344
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:28:15.336Z,1509442095.336 [PNI_TCM](ERROR): CRC does not match. Expected:0x31985 got:0x1857
2017-10-31T09:29:15.188Z,1509442155.188 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T09:24:15.1Z
2017-10-31T09:29:15.188Z,1509442155.188 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T09:29:15.188Z,1509442155.188 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T09:29:19.328Z,1509442159.328 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0272.lzma
2017-10-31T09:29:19.816Z,1509442159.816 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:29:20.104Z,1509442160.104 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0272.lzma.bak
2017-10-31T09:29:20.104Z,1509442160.104 [DataOverHttps](INFO): SBD MOMSN=5178578
2017-10-31T09:29:29.416Z,1509442169.416 [DataOverHttps](INFO): Sending 718 bytes from file Logs/20171030T210256/Express0273.lzma
2017-10-31T09:29:30.225Z,1509442170.225 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0273.lzma.bak
2017-10-31T09:29:30.225Z,1509442170.225 [DataOverHttps](INFO): SBD MOMSN=5178580
2017-10-31T09:29:30.693Z,1509442170.693 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T09:29:30.693Z,1509442170.693 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T09:29:30.693Z,1509442170.693 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T09:29:34.510Z,1509442174.510 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T09:29:38.741Z,1509442178.741 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133888
CHAN A1 (24V): -0.004615
CHAN A2 (12V): -0.002462
CHAN A3 (5V): 0.000341
CHAN B0 (3.3V): 0.000132
CHAN B1 (3.15aV): -0.000763
CHAN B2 (3.15bV): -0.000511
CHAN B3 (GND): -0.000224
OPEN: -0.000504
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:30:04.685Z,1509442204.685 [NAL9602](INFO): Powering down
2017-10-31T09:31:08.924Z,1509442268.924 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:31:19.719Z,1509442279.719 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134528
CHAN A1 (24V): -0.003706
CHAN A2 (12V): -0.002076
CHAN A3 (5V): 0.000516
CHAN B0 (3.3V): -0.000428
CHAN B1 (3.15aV): -0.000055
CHAN B2 (3.15bV): -0.000254
CHAN B3 (GND): -0.000088
OPEN: -0.000345
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:32:36.118Z,1509442356.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x48596 got:0x6591
2017-10-31T09:32:39.721Z,1509442359.721 [PNI_TCM](ERROR): CRC does not match. Expected:0x31345 got:0x32768
2017-10-31T09:32:49.739Z,1509442369.739 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:33:00.562Z,1509442380.562 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135121
CHAN A1 (24V): -0.003350
CHAN A2 (12V): -0.002135
CHAN A3 (5V): -0.000162
CHAN B0 (3.3V): -0.000071
CHAN B1 (3.15aV): -0.000402
CHAN B2 (3.15bV): -0.000617
CHAN B3 (GND): 0.000343
OPEN: -0.000627
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:33:04.920Z,1509442384.920 [PNI_TCM](ERROR): CRC does not match. Expected:0x38032 got:0x6978
2017-10-31T09:33:13.707Z,1509442393.707 [PNI_TCM](ERROR): CRC does not match. Expected:0x43664 got:0x1857
2017-10-31T09:33:21.714Z,1509442401.714 [PNI_TCM](ERROR): CRC does not match. Expected:0x1948 got:0x26396
2017-10-31T09:33:26.595Z,1509442406.595 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T09:34:30.926Z,1509442470.926 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:34:31.314Z,1509442471.314 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T09:34:31.314Z,1509442471.314 [Default:CheckIn:C.Wait] Stopped
2017-10-31T09:34:31.314Z,1509442471.314 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T09:34:31.315Z,1509442471.315 [Default:CheckIn:D] Running Loop=1
2017-10-31T09:34:31.714Z,1509442471.714 [Default:CheckIn:D] Stopped
2017-10-31T09:34:31.714Z,1509442471.714 [Default:CheckIn:E] Running Loop=1
2017-10-31T09:34:32.124Z,1509442472.124 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 657.400000 min 
2017-10-31T09:34:32.124Z,1509442472.124 [Default:CheckIn:E] Stopped
2017-10-31T09:34:32.124Z,1509442472.124 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T09:34:32.125Z,1509442472.125 [Default:CheckIn] Stopped
2017-10-31T09:34:32.125Z,1509442472.125 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T09:34:32.125Z,1509442472.125 [Default:CheckIn](INFO): Running loop #60
2017-10-31T09:34:32.125Z,1509442472.125 [Default:CheckIn] Running Loop=60
2017-10-31T09:34:32.125Z,1509442472.125 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T09:34:32.125Z,1509442472.125 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T09:34:35.565Z,1509442475.565 [NAL9602](INFO): Powering up
2017-10-31T09:34:44.848Z,1509442484.848 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134562
CHAN A1 (24V): -0.004110
CHAN A2 (12V): -0.002301
CHAN A3 (5V): 0.000357
CHAN B0 (3.3V): 0.000154
CHAN B1 (3.15aV): -0.000096
CHAN B2 (3.15bV): -0.000499
CHAN B3 (GND): 0.000327
OPEN: -0.000582
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:34:46.764Z,1509442486.764 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:34:47.560Z,1509442487.560 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T09:34:47.560Z,1509442487.560 [NAL9602] Data Fault, FailCount= 2
2017-10-31T09:34:47.560Z,1509442487.560 [NAL9602](ERROR): Data Fault
2017-10-31T09:34:47.644Z,1509442487.644 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T09:34:47.961Z,1509442487.961 [NAL9602](INFO): Powering down
2017-10-31T09:34:48.824Z,1509442488.824 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T09:34:48.829Z,1509442488.829 [NAL9602] No Fault, FailCount= 2
2017-10-31T09:35:17.976Z,1509442517.976 [NAL9602](INFO): Powering up NAL9602
2017-10-31T09:35:29.184Z,1509442529.184 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:36:15.156Z,1509442575.156 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:36:25.992Z,1509442585.992 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003068
CHAN A1 (24V): -0.004136
CHAN A2 (12V): -0.002160
CHAN A3 (5V): 0.000360
CHAN B0 (3.3V): 0.000029
CHAN B1 (3.15aV): -0.000375
CHAN B2 (3.15bV): -0.000154
CHAN B3 (GND): 0.000155
OPEN: -0.000383
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:37:56.059Z,1509442676.059 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:38:06.848Z,1509442686.848 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134145
CHAN A1 (24V): -0.004003
CHAN A2 (12V): -0.001847
CHAN A3 (5V): 0.000195
CHAN B0 (3.3V): -0.000121
CHAN B1 (3.15aV): -0.000641
CHAN B2 (3.15bV): -0.000441
CHAN B3 (GND): 0.000011
OPEN: -0.000701
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:39:32.366Z,1509442772.366 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T09:34:32.1Z
2017-10-31T09:39:32.366Z,1509442772.366 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T09:39:32.367Z,1509442772.367 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T09:39:37.040Z,1509442777.040 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:39:37.116Z,1509442777.116 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0276.lzma
2017-10-31T09:39:37.885Z,1509442777.885 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0276.lzma.bak
2017-10-31T09:39:37.885Z,1509442777.885 [DataOverHttps](INFO): SBD MOMSN=5178598
2017-10-31T09:39:47.273Z,1509442787.273 [DataOverHttps](INFO): Sending 638 bytes from file Logs/20171030T210256/Express0277.lzma
2017-10-31T09:39:48.078Z,1509442788.078 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0277.lzma.bak
2017-10-31T09:39:48.078Z,1509442788.078 [DataOverHttps](INFO): SBD MOMSN=5178600
2017-10-31T09:39:48.551Z,1509442788.551 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T09:39:48.551Z,1509442788.551 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T09:39:48.551Z,1509442788.551 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T09:39:55.316Z,1509442795.316 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.002159
CHAN A1 (24V): -0.004165
CHAN A2 (12V): -0.002068
CHAN A3 (5V): 0.000141
CHAN B0 (3.3V): 4.766929
CHAN B1 (3.15aV): -0.000366
CHAN B2 (3.15bV): -0.000460
CHAN B3 (GND): 0.000347
OPEN: -0.000662
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:40:32.013Z,1509442832.013 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T09:41:02.637Z,1509442862.637 [NAL9602](INFO): Powering down
2017-10-31T09:41:13.475Z,1509442873.475 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T09:41:13.475Z,1509442873.475 [BPC1] Data Fault, FailCount= 1
2017-10-31T09:41:13.475Z,1509442873.475 [BPC1](ERROR): Data Fault
2017-10-31T09:41:13.497Z,1509442873.497 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T09:41:14.706Z,1509442874.706 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:41:14.706Z,1509442874.706 [BPC1] No Fault, FailCount= 1
2017-10-31T09:41:25.492Z,1509442885.492 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:41:36.299Z,1509442896.299 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003322
CHAN A1 (24V): -0.003561
CHAN A2 (12V): -0.002315
CHAN A3 (5V): 0.000317
CHAN B0 (3.3V): 0.000173
CHAN B1 (3.15aV): -0.000061
CHAN B2 (3.15bV): -0.000466
CHAN B3 (GND): 0.000165
OPEN: -0.000410
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:42:44.914Z,1509442964.914 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:42:44.914Z,1509442964.914 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T09:42:45.301Z,1509442965.301 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:42:45.301Z,1509442965.301 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:42:45.302Z,1509442965.302 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:43:06.465Z,1509442986.465 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:43:17.206Z,1509442997.206 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134928
CHAN A1 (24V): -0.003152
CHAN A2 (12V): -0.002235
CHAN A3 (5V): 0.000061
CHAN B0 (3.3V): -0.000324
CHAN B1 (3.15aV): -0.000193
CHAN B2 (3.15bV): 0.000095
CHAN B3 (GND): -0.000633
OPEN: -0.000338
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:43:26.842Z,1509443006.842 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T09:43:56.146Z,1509443036.146 [PNI_TCM](ERROR): CRC does not match. Expected:0x11391 got:0x1857
2017-10-31T09:44:01.346Z,1509443041.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x21154 got:0x43289
2017-10-31T09:44:18.543Z,1509443058.543 [PNI_TCM](ERROR): CRC does not match. Expected:0x25248 got:0x16542
2017-10-31T09:44:20.144Z,1509443060.144 [PNI_TCM](ERROR): CRC does not match. Expected:0x18574 got:0x21959
2017-10-31T09:44:21.745Z,1509443061.745 [PNI_TCM](ERROR): CRC does not match. Expected:0x62835 got:0x17433
2017-10-31T09:44:29.745Z,1509443069.745 [PNI_TCM](ERROR): CRC does not match. Expected:0x6849 got:0x6335
2017-10-31T09:44:32.948Z,1509443072.948 [PNI_TCM](ERROR): CRC does not match. Expected:0x61106 got:0x16981
2017-10-31T09:44:34.547Z,1509443074.547 [PNI_TCM](ERROR): CRC does not match. Expected:0x37790 got:0x1857
2017-10-31T09:44:37.747Z,1509443077.747 [PNI_TCM](ERROR): CRC does not match. Expected:0x63964 got:0x6591
2017-10-31T09:44:40.136Z,1509443080.136 [BPC1](ERROR): Failed to receive battery data
2017-10-31T09:44:40.136Z,1509443080.136 [BPC1] Communications Fault, FailCount= 1
2017-10-31T09:44:40.136Z,1509443080.136 [BPC1](ERROR): Communications Fault
2017-10-31T09:44:40.196Z,1509443080.196 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T09:44:41.376Z,1509443081.376 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:44:41.377Z,1509443081.377 [BPC1] No Fault, FailCount= 1
2017-10-31T09:44:42.541Z,1509443082.541 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T09:44:42.940Z,1509443082.940 [PNI_TCM](ERROR): CRC does not match. Expected:0x38956 got:0x255
2017-10-31T09:44:45.744Z,1509443085.744 [PNI_TCM](ERROR): CRC does not match. Expected:0x21979 got:0x49072
2017-10-31T09:44:47.348Z,1509443087.348 [PNI_TCM](ERROR): CRC does not match. Expected:0x18343 got:0x6335
2017-10-31T09:44:47.418Z,1509443087.418 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:44:48.962Z,1509443088.962 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T09:44:48.962Z,1509443088.962 [Default:CheckIn:C.Wait] Stopped
2017-10-31T09:44:48.962Z,1509443088.962 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T09:44:48.962Z,1509443088.962 [Default:CheckIn:D] Running Loop=1
2017-10-31T09:44:49.361Z,1509443089.361 [Default:CheckIn:D] Stopped
2017-10-31T09:44:49.361Z,1509443089.361 [Default:CheckIn:E] Running Loop=1
2017-10-31T09:44:49.770Z,1509443089.770 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 667.694141 min 
2017-10-31T09:44:49.770Z,1509443089.770 [Default:CheckIn:E] Stopped
2017-10-31T09:44:49.770Z,1509443089.770 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T09:44:49.770Z,1509443089.770 [Default:CheckIn] Stopped
2017-10-31T09:44:49.770Z,1509443089.770 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T09:44:49.770Z,1509443089.770 [Default:CheckIn](INFO): Running loop #61
2017-10-31T09:44:49.775Z,1509443089.775 [Default:CheckIn] Running Loop=61
2017-10-31T09:44:49.775Z,1509443089.775 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T09:44:49.775Z,1509443089.775 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T09:44:53.385Z,1509443093.385 [NAL9602](INFO): Powering up
2017-10-31T09:45:00.455Z,1509443100.455 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134860
CHAN A1 (24V): -0.003747
CHAN A2 (12V): -0.002257
CHAN A3 (5V): 0.000282
CHAN B0 (3.3V): -0.000231
CHAN B1 (3.15aV): -0.000547
CHAN B2 (3.15bV): 0.000025
CHAN B3 (GND): -0.000118
OPEN: -0.000292
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:45:04.384Z,1509443104.384 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:45:45.665Z,1509443145.665 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:45:45.665Z,1509443145.665 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T09:45:45.665Z,1509443145.665 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:45:45.703Z,1509443145.703 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:45:46.065Z,1509443146.065 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:45:46.065Z,1509443146.065 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T09:45:46.447Z,1509443146.447 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:45:46.448Z,1509443146.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:45:46.448Z,1509443146.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:46:30.702Z,1509443190.702 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:46:41.485Z,1509443201.485 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133612
CHAN A1 (24V): -0.004987
CHAN A2 (12V): -0.002126
CHAN A3 (5V): 0.000070
CHAN B0 (3.3V): 0.000210
CHAN B1 (3.15aV): -0.000472
CHAN B2 (3.15bV): -0.000375
CHAN B3 (GND): -0.000324
OPEN: -0.000447
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:48:11.878Z,1509443291.878 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:48:22.698Z,1509443302.698 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002032
CHAN A1 (24V): -0.004206
CHAN A2 (12V): -0.002136
CHAN A3 (5V): 0.000554
CHAN B0 (3.3V): -0.000031
CHAN B1 (3.15aV): -0.000631
CHAN B2 (3.15bV): -0.000384
CHAN B3 (GND): -0.000251
OPEN: -0.000485
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:48:46.659Z,1509443326.659 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:48:46.659Z,1509443326.659 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T09:48:46.659Z,1509443326.659 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:48:46.697Z,1509443326.697 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:48:47.070Z,1509443327.070 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:48:47.070Z,1509443327.070 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T09:48:47.467Z,1509443327.467 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:48:47.467Z,1509443327.467 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:48:47.468Z,1509443327.468 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:49:49.808Z,1509443389.808 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T09:44:49.8Z
2017-10-31T09:49:49.808Z,1509443389.808 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T09:49:49.808Z,1509443389.808 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T09:49:54.571Z,1509443394.571 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:49:54.609Z,1509443394.609 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0280.lzma
2017-10-31T09:49:55.385Z,1509443395.385 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0280.lzma.bak
2017-10-31T09:49:55.385Z,1509443395.385 [DataOverHttps](INFO): SBD MOMSN=5178617
2017-10-31T09:50:04.820Z,1509443404.820 [DataOverHttps](INFO): Sending 619 bytes from file Logs/20171030T210256/Express0281.lzma
2017-10-31T09:50:05.625Z,1509443405.625 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0281.lzma.bak
2017-10-31T09:50:05.625Z,1509443405.625 [DataOverHttps](INFO): SBD MOMSN=5178619
2017-10-31T09:50:06.106Z,1509443406.106 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T09:50:06.106Z,1509443406.106 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T09:50:06.106Z,1509443406.106 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T09:50:09.687Z,1509443409.687 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T09:50:12.653Z,1509443412.653 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133735
CHAN A1 (24V): -0.004574
CHAN A2 (12V): -0.001889
CHAN A3 (5V): 0.000065
CHAN B0 (3.3V): 4.766929
CHAN B1 (3.15aV): 0.000166
CHAN B2 (3.15bV): 0.000255
CHAN B3 (GND): -0.000406
OPEN: -0.000332
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:50:40.198Z,1509443440.198 [NAL9602](INFO): Powering down
2017-10-31T09:51:42.780Z,1509443502.780 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:51:47.580Z,1509443507.580 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:51:47.580Z,1509443507.580 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T09:51:47.580Z,1509443507.580 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:51:47.618Z,1509443507.618 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:51:47.998Z,1509443507.998 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:51:47.998Z,1509443507.998 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T09:51:48.360Z,1509443508.360 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:51:48.360Z,1509443508.360 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:51:48.377Z,1509443508.377 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:51:53.623Z,1509443513.623 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003772
CHAN A1 (24V): -0.003768
CHAN A2 (12V): -0.002117
CHAN A3 (5V): -0.000127
CHAN B0 (3.3V): -0.000277
CHAN B1 (3.15aV): -0.000434
CHAN B2 (3.15bV): -0.000273
CHAN B3 (GND): 0.000118
OPEN: -0.000503
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:53:15.869Z,1509443595.869 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T09:53:15.869Z,1509443595.869 [BPC1] Data Fault, FailCount= 1
2017-10-31T09:53:15.869Z,1509443595.869 [BPC1](ERROR): Data Fault
2017-10-31T09:53:15.926Z,1509443595.926 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T09:53:17.109Z,1509443597.109 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:53:17.109Z,1509443597.109 [BPC1] No Fault, FailCount= 1
2017-10-31T09:53:23.897Z,1509443603.897 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:53:27.125Z,1509443607.125 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T09:53:34.723Z,1509443614.723 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134627
CHAN A1 (24V): -0.003701
CHAN A2 (12V): -0.001826
CHAN A3 (5V): 0.000165
CHAN B0 (3.3V): -0.000105
CHAN B1 (3.15aV): -0.000622
CHAN B2 (3.15bV): -0.000626
CHAN B3 (GND): 0.000417
OPEN: -0.000315
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:54:26.016Z,1509443666.016 [BPC1](ERROR): Failed to receive battery data
2017-10-31T09:54:26.016Z,1509443666.016 [BPC1] Communications Fault, FailCount= 1
2017-10-31T09:54:26.017Z,1509443666.017 [BPC1](ERROR): Communications Fault
2017-10-31T09:54:26.098Z,1509443666.098 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T09:54:27.281Z,1509443667.281 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:54:27.281Z,1509443667.281 [BPC1] No Fault, FailCount= 1
2017-10-31T09:54:48.483Z,1509443688.483 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:54:48.483Z,1509443688.483 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T09:54:48.483Z,1509443688.483 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:54:48.497Z,1509443688.497 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:54:48.898Z,1509443688.898 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:54:48.898Z,1509443688.898 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T09:54:49.252Z,1509443689.252 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:54:49.252Z,1509443689.252 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:54:49.253Z,1509443689.253 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:55:04.868Z,1509443704.868 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:55:06.895Z,1509443706.895 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T09:55:06.896Z,1509443706.896 [Default:CheckIn:C.Wait] Stopped
2017-10-31T09:55:06.896Z,1509443706.896 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T09:55:06.896Z,1509443706.896 [Default:CheckIn:D] Running Loop=1
2017-10-31T09:55:07.250Z,1509443707.250 [Default:CheckIn:D] Stopped
2017-10-31T09:55:07.250Z,1509443707.250 [Default:CheckIn:E] Running Loop=1
2017-10-31T09:55:07.647Z,1509443707.647 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 677.992253 min 
2017-10-31T09:55:07.647Z,1509443707.647 [Default:CheckIn:E] Stopped
2017-10-31T09:55:07.647Z,1509443707.647 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T09:55:07.648Z,1509443707.648 [Default:CheckIn] Stopped
2017-10-31T09:55:07.648Z,1509443707.648 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T09:55:07.648Z,1509443707.648 [Default:CheckIn](INFO): Running loop #62
2017-10-31T09:55:07.648Z,1509443707.648 [Default:CheckIn] Running Loop=62
2017-10-31T09:55:07.648Z,1509443707.648 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T09:55:07.648Z,1509443707.648 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T09:55:11.132Z,1509443711.132 [NAL9602](INFO): Powering up
2017-10-31T09:55:18.065Z,1509443718.065 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003834
CHAN A1 (24V): -0.003535
CHAN A2 (12V): -0.002003
CHAN A3 (5V): 0.000591
CHAN B0 (3.3V): -0.000493
CHAN B1 (3.15aV): -0.000448
CHAN B2 (3.15bV): -0.000026
CHAN B3 (GND): -0.000204
OPEN: -0.000539
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:55:21.943Z,1509443721.943 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:55:22.741Z,1509443722.741 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T09:55:22.741Z,1509443722.741 [NAL9602] Data Fault, FailCount= 3
2017-10-31T09:55:22.741Z,1509443722.741 [NAL9602](ERROR): Data Fault
2017-10-31T09:55:22.843Z,1509443722.843 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T09:55:23.137Z,1509443723.137 [NAL9602](INFO): Powering down
2017-10-31T09:55:23.994Z,1509443723.994 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T09:55:23.994Z,1509443723.994 [NAL9602] No Fault, FailCount= 3
2017-10-31T09:55:53.538Z,1509443753.538 [NAL9602](INFO): Powering up NAL9602
2017-10-31T09:55:58.375Z,1509443758.375 [BPC1](ERROR): Failed to receive battery data
2017-10-31T09:55:58.375Z,1509443758.375 [BPC1] Communications Fault, FailCount= 1
2017-10-31T09:55:58.375Z,1509443758.375 [BPC1](ERROR): Communications Fault
2017-10-31T09:55:58.434Z,1509443758.434 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T09:55:59.593Z,1509443759.593 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T09:55:59.593Z,1509443759.593 [BPC1] No Fault, FailCount= 1
2017-10-31T09:56:04.735Z,1509443764.735 [NAL9602](INFO): NAL9602 initialized
2017-10-31T09:56:48.252Z,1509443808.252 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:56:59.042Z,1509443819.042 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134104
CHAN A1 (24V): -0.003912
CHAN A2 (12V): -0.001967
CHAN A3 (5V): 0.000385
CHAN B0 (3.3V): -0.000299
CHAN B1 (3.15aV): -0.000485
CHAN B2 (3.15bV): -0.000104
CHAN B3 (GND): 0.000477
OPEN: -0.000250
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:57:49.283Z,1509443869.283 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T09:57:49.284Z,1509443869.284 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T09:57:49.284Z,1509443869.284 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T09:57:49.309Z,1509443869.309 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T09:57:49.636Z,1509443869.636 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T09:57:49.636Z,1509443869.636 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T09:57:50.019Z,1509443870.019 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T09:57:50.020Z,1509443870.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T09:57:50.020Z,1509443870.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T09:58:29.124Z,1509443909.124 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T09:58:39.897Z,1509443919.897 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002096
CHAN A1 (24V): -0.003985
CHAN A2 (12V): -0.001767
CHAN A3 (5V): 0.000074
CHAN B0 (3.3V): 0.000399
CHAN B1 (3.15aV): -0.000034
CHAN B2 (3.15bV): -0.000132
CHAN B3 (GND): -0.000232
OPEN: -0.000645
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T09:59:16.178Z,1509443956.178 [PNI_TCM](ERROR): CRC does not match. Expected:0x44434 got:0x26648
2017-10-31T09:59:19.768Z,1509443959.768 [PNI_TCM](ERROR): CRC does not match. Expected:0x45238 got:0x16404
2017-10-31T09:59:20.987Z,1509443960.987 [PNI_TCM](ERROR): CRC does not match. Expected:0x60629 got:0x45394
2017-10-31T09:59:28.983Z,1509443968.983 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T09:59:35.379Z,1509443975.379 [PNI_TCM](ERROR): CRC does not match. Expected:0x4890 got:0x25007
2017-10-31T09:59:43.378Z,1509443983.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x12829 got:0x26882
2017-10-31T09:59:44.979Z,1509443984.979 [PNI_TCM](ERROR): CRC does not match. Expected:0x36707 got:0x6978
2017-10-31T09:59:51.375Z,1509443991.375 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T09:59:56.583Z,1509443996.583 [PNI_TCM](ERROR): CRC does not match. Expected:0x3797 got:0x49073
2017-10-31T10:00:02.580Z,1509444002.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x62212 got:0x50350
2017-10-31T10:00:07.806Z,1509444007.806 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T09:55:07.6Z
2017-10-31T10:00:07.806Z,1509444007.806 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T10:00:07.806Z,1509444007.806 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T10:00:12.559Z,1509444012.559 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:00:12.597Z,1509444012.597 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0284.lzma
2017-10-31T10:00:13.375Z,1509444013.375 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0284.lzma.bak
2017-10-31T10:00:13.375Z,1509444013.375 [DataOverHttps](INFO): SBD MOMSN=5178635
2017-10-31T10:00:22.742Z,1509444022.742 [DataOverHttps](INFO): Sending 649 bytes from file Logs/20171030T210256/Express0285.lzma
2017-10-31T10:00:23.546Z,1509444023.546 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0285.lzma.bak
2017-10-31T10:00:23.546Z,1509444023.546 [DataOverHttps](INFO): SBD MOMSN=5178637
2017-10-31T10:00:24.087Z,1509444024.087 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T10:00:24.087Z,1509444024.087 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T10:00:24.088Z,1509444024.088 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T10:00:31.862Z,1509444031.862 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002437
CHAN A1 (24V): -0.004032
CHAN A2 (12V): -0.001856
CHAN A3 (5V): 0.000376
CHAN B0 (3.3V): 0.000116
CHAN B1 (3.15aV): -0.000076
CHAN B2 (3.15bV): -0.000008
CHAN B3 (GND): -0.000079
OPEN: -0.000597
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:00:50.266Z,1509444050.266 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:00:50.266Z,1509444050.266 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T10:00:50.266Z,1509444050.266 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:00:50.298Z,1509444050.298 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:00:50.683Z,1509444050.683 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:00:50.683Z,1509444050.683 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T10:00:51.046Z,1509444051.046 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:00:51.046Z,1509444051.046 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:00:51.047Z,1509444051.047 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:01:07.403Z,1509444067.403 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T10:01:37.966Z,1509444097.966 [NAL9602](INFO): Powering down
2017-10-31T10:02:02.037Z,1509444122.037 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:02:12.826Z,1509444132.826 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134836
CHAN A1 (24V): -0.003892
CHAN A2 (12V): -0.002138
CHAN A3 (5V): 0.000021
CHAN B0 (3.3V): -0.000002
CHAN B1 (3.15aV): -0.000095
CHAN B2 (3.15bV): -0.000205
CHAN B3 (GND): 0.000159
OPEN: -0.000583
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:03:28.471Z,1509444208.471 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T10:03:42.963Z,1509444222.963 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:03:51.328Z,1509444231.328 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:03:51.329Z,1509444231.329 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T10:03:51.329Z,1509444231.329 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:03:51.362Z,1509444231.362 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:03:51.768Z,1509444231.768 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:03:51.768Z,1509444231.768 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T10:03:52.129Z,1509444232.129 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:03:52.129Z,1509444232.129 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:03:52.130Z,1509444232.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:03:53.748Z,1509444233.748 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.002752
CHAN A1 (24V): -0.004339
CHAN A2 (12V): -0.002038
CHAN A3 (5V): 0.000424
CHAN B0 (3.3V): -0.000048
CHAN B1 (3.15aV): -0.000064
CHAN B2 (3.15bV): 4.767929
CHAN B3 (GND): 0.000314
OPEN: -0.000398
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:04:15.326Z,1509444255.326 [BPC1](ERROR): Failed to receive battery data
2017-10-31T10:04:15.327Z,1509444255.327 [BPC1] Communications Fault, FailCount= 1
2017-10-31T10:04:15.327Z,1509444255.327 [BPC1](ERROR): Communications Fault
2017-10-31T10:04:15.350Z,1509444255.350 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T10:04:16.574Z,1509444256.574 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:04:16.574Z,1509444256.574 [BPC1] No Fault, FailCount= 1
2017-10-31T10:05:23.750Z,1509444323.750 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:05:24.505Z,1509444324.505 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T10:05:24.505Z,1509444324.505 [Default:CheckIn:C.Wait] Stopped
2017-10-31T10:05:24.505Z,1509444324.505 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T10:05:24.506Z,1509444324.506 [Default:CheckIn:D] Running Loop=1
2017-10-31T10:05:24.914Z,1509444324.914 [Default:CheckIn:D] Stopped
2017-10-31T10:05:24.914Z,1509444324.914 [Default:CheckIn:E] Running Loop=1
2017-10-31T10:05:25.353Z,1509444325.353 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 688.286654 min 
2017-10-31T10:05:25.353Z,1509444325.353 [Default:CheckIn:E] Stopped
2017-10-31T10:05:25.353Z,1509444325.353 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T10:05:25.353Z,1509444325.353 [Default:CheckIn] Stopped
2017-10-31T10:05:25.353Z,1509444325.353 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T10:05:25.353Z,1509444325.353 [Default:CheckIn](INFO): Running loop #63
2017-10-31T10:05:25.353Z,1509444325.353 [Default:CheckIn] Running Loop=63
2017-10-31T10:05:25.354Z,1509444325.354 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T10:05:25.354Z,1509444325.354 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T10:05:28.908Z,1509444328.908 [NAL9602](INFO): Powering up
2017-10-31T10:05:37.136Z,1509444337.136 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134943
CHAN A1 (24V): -0.004129
CHAN A2 (12V): -0.002551
CHAN A3 (5V): 0.000632
CHAN B0 (3.3V): -0.000049
CHAN B1 (3.15aV): -0.000317
CHAN B2 (3.15bV): -0.000481
CHAN B3 (GND): -0.000013
OPEN: -0.000230
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:05:39.869Z,1509444339.869 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:05:45.900Z,1509444345.900 [BPC1](ERROR): Failed to receive battery data
2017-10-31T10:05:45.900Z,1509444345.900 [BPC1] Communications Fault, FailCount= 1
2017-10-31T10:05:45.901Z,1509444345.901 [BPC1](ERROR): Communications Fault
2017-10-31T10:05:45.936Z,1509444345.936 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T10:05:47.126Z,1509444347.126 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:05:47.126Z,1509444347.126 [BPC1] No Fault, FailCount= 1
2017-10-31T10:06:05.903Z,1509444365.903 [BPC1](ERROR): Failed to parse message.
2017-10-31T10:06:05.903Z,1509444365.903 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T10:06:05.903Z,1509444365.903 [BPC1] Data Fault, FailCount= 2
2017-10-31T10:06:05.903Z,1509444365.903 [BPC1](ERROR): Data Fault
2017-10-31T10:06:05.927Z,1509444365.927 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T10:06:07.128Z,1509444367.128 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:06:07.128Z,1509444367.128 [BPC1] No Fault, FailCount= 2
2017-10-31T10:06:11.479Z,1509444371.479 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T10:06:11.561Z,1509444371.561 [NAL9602](FAULT): received: 
+CSQ:0

OK21, 2, 0, 0, 0

OK
2017-10-31T10:06:11.562Z,1509444371.562 [NAL9602] Data Fault, FailCount= 4
2017-10-31T10:06:11.562Z,1509444371.562 [NAL9602](ERROR): Data Fault
2017-10-31T10:06:11.665Z,1509444371.665 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T10:06:11.875Z,1509444371.875 [NAL9602](INFO): Powering down
2017-10-31T10:06:12.738Z,1509444372.738 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T10:06:12.738Z,1509444372.738 [NAL9602] No Fault, FailCount= 4
2017-10-31T10:06:41.947Z,1509444401.947 [NAL9602](INFO): Powering up NAL9602
2017-10-31T10:06:52.406Z,1509444412.406 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:06:52.406Z,1509444412.406 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T10:06:52.406Z,1509444412.406 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:06:52.420Z,1509444412.420 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:06:52.866Z,1509444412.866 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:06:52.866Z,1509444412.866 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T10:06:53.157Z,1509444413.157 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:06:53.212Z,1509444413.212 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:06:53.212Z,1509444413.212 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:06:53.213Z,1509444413.213 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:06:53.946Z,1509444413.946 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T10:06:53.946Z,1509444413.946 [NAL9602] Data Fault, FailCount= 5
2017-10-31T10:06:53.946Z,1509444413.946 [NAL9602](ERROR): Data Fault
2017-10-31T10:06:54.038Z,1509444414.038 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T10:06:54.038Z,1509444414.038 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T10:06:54.347Z,1509444414.347 [NAL9602](INFO): Powering down
2017-10-31T10:06:54.429Z,1509444414.429 [CBIT](INFO): Critical error at 20171031T100654
2017-10-31T10:07:07.200Z,1509444427.200 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:07:18.010Z,1509444438.010 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003338
CHAN A1 (24V): -0.003612
CHAN A2 (12V): -0.002347
CHAN A3 (5V): 0.000347
CHAN B0 (3.3V): -0.000074
CHAN B1 (3.15aV): 0.000016
CHAN B2 (3.15bV): -0.000223
CHAN B3 (GND): 0.000267
OPEN: -0.000273
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:08:48.320Z,1509444528.320 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:08:54.306Z,1509444534.306 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T10:08:54.306Z,1509444534.306 [NAL9602] No Fault, FailCount= 5
2017-10-31T10:08:54.640Z,1509444534.640 [NAL9602](INFO): Powering up NAL9602
2017-10-31T10:08:59.108Z,1509444539.108 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135125
CHAN A1 (24V): -0.003264
CHAN A2 (12V): -0.002527
CHAN A3 (5V): 0.000029
CHAN B0 (3.3V): -0.000060
CHAN B1 (3.15aV): 0.000075
CHAN B2 (3.15bV): -0.000258
CHAN B3 (GND): -0.000539
OPEN: -0.000415
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:09:05.831Z,1509444545.831 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:09:32.201Z,1509444572.201 [PNI_TCM](ERROR): CRC does not match. Expected:0x12214 got:0x42752
2017-10-31T10:09:36.985Z,1509444576.985 [PNI_TCM](ERROR): CRC does not match. Expected:0x28799 got:0x5336
2017-10-31T10:09:37.397Z,1509444577.397 [PNI_TCM](ERROR): CRC does not match. Expected:0x63836 got:0x45718
2017-10-31T10:09:40.200Z,1509444580.200 [PNI_TCM](ERROR): CRC does not match. Expected:0x24197 got:0x16981
2017-10-31T10:09:41.795Z,1509444581.795 [PNI_TCM](ERROR): CRC does not match. Expected:0x5705 got:0x51746
2017-10-31T10:09:43.416Z,1509444583.416 [PNI_TCM](ERROR): CRC does not match. Expected:0x42994 got:0x49330
2017-10-31T10:09:49.793Z,1509444589.793 [PNI_TCM](ERROR): CRC does not match. Expected:0x58962 got:0x44620
2017-10-31T10:09:51.395Z,1509444591.395 [PNI_TCM](ERROR): CRC does not match. Expected:0x38028 got:0x40801
2017-10-31T10:09:53.001Z,1509444593.001 [PNI_TCM](ERROR): CRC does not match. Expected:0x50013 got:0x13593
2017-10-31T10:09:53.434Z,1509444593.434 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:09:53.434Z,1509444593.434 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T10:09:53.434Z,1509444593.434 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:09:53.447Z,1509444593.447 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:09:53.822Z,1509444593.822 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:09:53.822Z,1509444593.822 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T10:09:54.210Z,1509444594.210 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:09:54.211Z,1509444594.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:09:54.211Z,1509444594.211 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:09:57.807Z,1509444597.807 [PNI_TCM](ERROR): CRC does not match. Expected:0x53505 got:0x9410
2017-10-31T10:10:01.002Z,1509444601.002 [PNI_TCM](ERROR): CRC does not match. Expected:0x12049 got:0x16938
2017-10-31T10:10:09.003Z,1509444609.003 [PNI_TCM](ERROR): CRC does not match. Expected:0x31977 got:0x10969
2017-10-31T10:10:18.598Z,1509444618.598 [PNI_TCM](ERROR): CRC does not match. Expected:0x53963 got:0x16541
2017-10-31T10:10:20.195Z,1509444620.195 [PNI_TCM](ERROR): CRC does not match. Expected:0x26895 got:0x6978
2017-10-31T10:10:21.797Z,1509444621.797 [PNI_TCM](ERROR): CRC does not match. Expected:0x60668 got:0x18090
2017-10-31T10:10:23.403Z,1509444623.403 [PNI_TCM](ERROR): CRC does not match. Expected:0x31266 got:0x49331
2017-10-31T10:10:25.436Z,1509444625.436 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T10:05:25.4Z
2017-10-31T10:10:25.436Z,1509444625.436 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T10:10:25.436Z,1509444625.436 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T10:10:30.414Z,1509444630.414 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:10:30.472Z,1509444630.472 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20171030T210256/Courier0288.lzma
2017-10-31T10:10:31.252Z,1509444631.252 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0288.lzma.bak
2017-10-31T10:10:31.252Z,1509444631.252 [DataOverHttps](INFO): SBD MOMSN=5178654
2017-10-31T10:10:31.259Z,1509444631.259 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T10:10:31.259Z,1509444631.259 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T10:10:41.141Z,1509444641.141 [DataOverHttps](INFO): Sending 676 bytes from file Logs/20171030T210256/Express0289.lzma
2017-10-31T10:10:41.941Z,1509444641.941 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0289.lzma.bak
2017-10-31T10:10:41.941Z,1509444641.941 [DataOverHttps](INFO): SBD MOMSN=5178657
2017-10-31T10:10:42.410Z,1509444642.410 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T10:10:42.411Z,1509444642.411 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T10:10:42.411Z,1509444642.411 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T10:10:49.308Z,1509444649.308 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002849
CHAN A1 (24V): -0.003841
CHAN A2 (12V): -0.001997
CHAN A3 (5V): 0.000006
CHAN B0 (3.3V): -0.000075
CHAN B1 (3.15aV): -0.000322
CHAN B2 (3.15bV): -0.000055
CHAN B3 (GND): -0.000224
OPEN: -0.000730
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:10:57.216Z,1509444657.216 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T10:10:57.216Z,1509444657.216 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T10:10:57.612Z,1509444657.612 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T10:11:28.007Z,1509444688.007 [NAL9602](INFO): Powering down
2017-10-31T10:11:52.000Z,1509444713.000 [PNI_TCM](ERROR): CRC does not match. Expected:0x2815 got:0x52831
2017-10-31T10:11:54.607Z,1509444714.607 [PNI_TCM](ERROR): CRC does not match. Expected:0x54148 got:0x53070
2017-10-31T10:12:09.015Z,1509444729.015 [PNI_TCM](ERROR): CRC does not match. Expected:0x39862 got:0x16769
2017-10-31T10:12:10.602Z,1509444730.602 [PNI_TCM](ERROR): CRC does not match. Expected:0x32970 got:0x16981
2017-10-31T10:12:19.433Z,1509444739.433 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:12:21.801Z,1509444741.801 [PNI_TCM](ERROR): CRC does not match. Expected:0x20976 got:0x49074
2017-10-31T10:12:23.398Z,1509444743.398 [PNI_TCM](ERROR): CRC does not match. Expected:0x64486 got:0x16981
2017-10-31T10:12:25.030Z,1509444745.030 [PNI_TCM](ERROR): CRC does not match. Expected:0x17188 got:0x43072
2017-10-31T10:12:26.601Z,1509444746.601 [PNI_TCM](ERROR): CRC does not match. Expected:0x27368 got:0x1857
2017-10-31T10:12:28.214Z,1509444748.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x64342 got:0x36963
2017-10-31T10:12:29.820Z,1509444749.820 [PNI_TCM](ERROR): CRC does not match. Expected:0x9524 got:0x6335
2017-10-31T10:12:30.263Z,1509444750.263 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003865
CHAN A1 (24V): -0.003264
CHAN A2 (12V): -0.002856
CHAN A3 (5V): -0.000015
CHAN B0 (3.3V): 0.000479
CHAN B1 (3.15aV): 0.000004
CHAN B2 (3.15bV): -0.000237
CHAN B3 (GND): 0.000191
OPEN: -0.000089
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:12:39.401Z,1509444759.401 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T10:12:54.461Z,1509444774.461 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:12:54.462Z,1509444774.462 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T10:12:54.462Z,1509444774.462 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:12:54.475Z,1509444774.475 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:12:54.874Z,1509444774.874 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:12:54.874Z,1509444774.874 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T10:12:55.303Z,1509444775.303 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:12:55.304Z,1509444775.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:12:55.304Z,1509444775.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:13:28.493Z,1509444808.493 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T10:14:00.424Z,1509444840.424 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:14:11.228Z,1509444851.228 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134492
CHAN A1 (24V): -0.004174
CHAN A2 (12V): -0.002147
CHAN A3 (5V): -0.000024
CHAN B0 (3.3V): 0.000101
CHAN B1 (3.15aV): 0.000087
CHAN B2 (3.15bV): -0.000185
CHAN B3 (GND): -0.000297
OPEN: -0.000353
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:15:41.414Z,1509444941.414 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:15:43.004Z,1509444943.004 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T10:15:43.004Z,1509444943.004 [Default:CheckIn:C.Wait] Stopped
2017-10-31T10:15:43.004Z,1509444943.004 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T10:15:43.005Z,1509444943.005 [Default:CheckIn:D] Running Loop=1
2017-10-31T10:15:43.375Z,1509444943.375 [Default:CheckIn:D] Stopped
2017-10-31T10:15:43.375Z,1509444943.375 [Default:CheckIn:E] Running Loop=1
2017-10-31T10:15:43.779Z,1509444943.779 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 698.594336 min 
2017-10-31T10:15:43.779Z,1509444943.779 [Default:CheckIn:E] Stopped
2017-10-31T10:15:43.779Z,1509444943.779 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T10:15:43.779Z,1509444943.779 [Default:CheckIn] Stopped
2017-10-31T10:15:43.780Z,1509444943.780 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T10:15:43.780Z,1509444943.780 [Default:CheckIn](INFO): Running loop #64
2017-10-31T10:15:43.780Z,1509444943.780 [Default:CheckIn] Running Loop=64
2017-10-31T10:15:43.780Z,1509444943.780 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T10:15:43.780Z,1509444943.780 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T10:15:47.168Z,1509444947.168 [NAL9602](INFO): Powering up
2017-10-31T10:15:55.267Z,1509444955.267 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003911
CHAN A1 (24V): -0.004144
CHAN A2 (12V): -0.002107
CHAN A3 (5V): 0.000474
CHAN B0 (3.3V): 0.000108
CHAN B1 (3.15aV): 0.000098
CHAN B2 (3.15bV): 0.000043
CHAN B3 (GND): 0.000082
OPEN: -0.000523
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:15:55.617Z,1509444955.617 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:15:55.618Z,1509444955.618 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T10:15:55.618Z,1509444955.618 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:15:55.654Z,1509444955.654 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:15:56.025Z,1509444956.025 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:15:56.025Z,1509444956.025 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T10:15:56.413Z,1509444956.413 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:15:56.414Z,1509444956.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:15:56.414Z,1509444956.414 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:15:57.974Z,1509444957.974 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:17:25.483Z,1509445045.483 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:17:36.292Z,1509445056.292 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134647
CHAN A1 (24V): -0.003980
CHAN A2 (12V): -0.002591
CHAN A3 (5V): 0.000566
CHAN B0 (3.3V): -0.000369
CHAN B1 (3.15aV): -0.000390
CHAN B2 (3.15bV): -0.000279
CHAN B3 (GND): -0.000469
OPEN: -0.000283
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:18:28.863Z,1509445108.863 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T10:18:28.863Z,1509445108.863 [BPC1] Data Fault, FailCount= 1
2017-10-31T10:18:28.864Z,1509445108.864 [BPC1](ERROR): Data Fault
2017-10-31T10:18:28.956Z,1509445108.956 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T10:18:30.055Z,1509445110.055 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:18:30.055Z,1509445110.055 [BPC1] No Fault, FailCount= 1
2017-10-31T10:18:49.405Z,1509445129.405 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T10:18:53.816Z,1509445133.816 [PNI_TCM](ERROR): CRC does not match. Expected:0x26750 got:0x57646
2017-10-31T10:18:56.614Z,1509445136.614 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:18:56.614Z,1509445136.614 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T10:18:56.614Z,1509445136.614 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:18:56.629Z,1509445136.629 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:18:57.038Z,1509445137.038 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:18:57.038Z,1509445137.038 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T10:18:57.428Z,1509445137.428 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:18:57.433Z,1509445137.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:18:57.434Z,1509445137.434 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:19:03.419Z,1509445143.419 [PNI_TCM](ERROR): CRC does not match. Expected:0x3413 got:0x0
2017-10-31T10:19:06.632Z,1509445146.632 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:19:14.625Z,1509445154.625 [PNI_TCM](ERROR): CRC does not match. Expected:0x41805 got:0x10521
2017-10-31T10:19:15.406Z,1509445155.406 [PNI_TCM](ERROR): CRC does not match. Expected:0x33523 got:0x1857
2017-10-31T10:19:17.463Z,1509445157.463 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002952
CHAN A1 (24V): -0.004977
CHAN A2 (12V): -0.002348
CHAN A3 (5V): 0.000074
CHAN B0 (3.3V): 0.000028
CHAN B1 (3.15aV): 0.000184
CHAN B2 (3.15bV): -0.000070
CHAN B3 (GND): -0.000076
OPEN: -0.000261
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:19:29.792Z,1509445169.792 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T10:19:30.622Z,1509445170.622 [PNI_TCM](ERROR): CRC does not match. Expected:0x51927 got:0x57788
2017-10-31T10:19:31.400Z,1509445171.400 [PNI_TCM](ERROR): CRC does not match. Expected:0x29726 got:0x20370
2017-10-31T10:20:09.249Z,1509445209.249 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T10:20:09.249Z,1509445209.249 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T10:20:44.100Z,1509445244.100 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T10:15:43.8Z
2017-10-31T10:20:44.100Z,1509445244.100 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T10:20:44.100Z,1509445244.100 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T10:20:48.380Z,1509445248.380 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:20:48.452Z,1509445248.452 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0292.lzma
2017-10-31T10:20:49.196Z,1509445249.196 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0292.lzma.bak
2017-10-31T10:20:49.196Z,1509445249.196 [DataOverHttps](INFO): SBD MOMSN=5178675
2017-10-31T10:20:58.507Z,1509445258.507 [DataOverHttps](INFO): Sending 630 bytes from file Logs/20171030T210256/Express0293.lzma
2017-10-31T10:20:59.308Z,1509445259.308 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0293.lzma.bak
2017-10-31T10:20:59.309Z,1509445259.309 [DataOverHttps](INFO): SBD MOMSN=5178677
2017-10-31T10:20:59.781Z,1509445259.781 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T10:20:59.781Z,1509445259.781 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T10:20:59.781Z,1509445259.781 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T10:21:03.571Z,1509445263.571 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T10:21:06.623Z,1509445266.623 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133935
CHAN A1 (24V): 4.657929
CHAN A2 (12V): -0.002462
CHAN A3 (5V): 0.000427
CHAN B0 (3.3V): 0.000140
CHAN B1 (3.15aV): -0.000119
CHAN B2 (3.15bV): -0.000360
CHAN B3 (GND): 0.000185
OPEN: -0.000373
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:21:33.733Z,1509445293.733 [NAL9602](INFO): Powering down
2017-10-31T10:21:57.780Z,1509445317.780 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:21:57.780Z,1509445317.780 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T10:21:57.780Z,1509445317.780 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:21:57.794Z,1509445317.794 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:21:58.217Z,1509445318.217 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:21:58.217Z,1509445318.217 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T10:21:58.564Z,1509445318.564 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:21:58.564Z,1509445318.564 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:21:58.565Z,1509445318.565 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:22:36.758Z,1509445356.758 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:22:47.570Z,1509445367.570 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002875
CHAN A1 (24V): -0.003415
CHAN A2 (12V): -0.002516
CHAN A3 (5V): 0.000344
CHAN B0 (3.3V): -0.000027
CHAN B1 (3.15aV): 0.000036
CHAN B2 (3.15bV): -0.000390
CHAN B3 (GND): 0.000040
OPEN: -0.000421
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:23:28.626Z,1509445408.626 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T10:24:17.704Z,1509445457.704 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:24:28.526Z,1509445468.526 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134945
CHAN A1 (24V): -0.003432
CHAN A2 (12V): -0.001926
CHAN A3 (5V): 0.000247
CHAN B0 (3.3V): 0.000343
CHAN B1 (3.15aV): -0.000161
CHAN B2 (3.15bV): -0.000316
CHAN B3 (GND): -0.000425
OPEN: -0.000174
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:24:58.888Z,1509445498.888 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:24:58.888Z,1509445498.888 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T10:24:58.888Z,1509445498.888 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:24:58.921Z,1509445498.921 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:24:59.297Z,1509445499.297 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:24:59.297Z,1509445499.297 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T10:24:59.692Z,1509445499.692 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:24:59.692Z,1509445499.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:24:59.692Z,1509445499.692 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:25:58.736Z,1509445558.736 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:26:00.267Z,1509445560.267 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T10:26:00.267Z,1509445560.267 [Default:CheckIn:C.Wait] Stopped
2017-10-31T10:26:00.267Z,1509445560.267 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T10:26:00.268Z,1509445560.268 [Default:CheckIn:D] Running Loop=1
2017-10-31T10:26:00.669Z,1509445560.669 [Default:CheckIn:D] Stopped
2017-10-31T10:26:00.669Z,1509445560.669 [Default:CheckIn:E] Running Loop=1
2017-10-31T10:26:01.077Z,1509445561.077 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 708.882552 min 
2017-10-31T10:26:01.078Z,1509445561.078 [Default:CheckIn:E] Stopped
2017-10-31T10:26:01.078Z,1509445561.078 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T10:26:01.078Z,1509445561.078 [Default:CheckIn] Stopped
2017-10-31T10:26:01.078Z,1509445561.078 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T10:26:01.078Z,1509445561.078 [Default:CheckIn](INFO): Running loop #65
2017-10-31T10:26:01.078Z,1509445561.078 [Default:CheckIn] Running Loop=65
2017-10-31T10:26:01.079Z,1509445561.079 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T10:26:01.079Z,1509445561.079 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T10:26:04.460Z,1509445564.460 [NAL9602](INFO): Powering up
2017-10-31T10:26:12.554Z,1509445572.554 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134562
CHAN A1 (24V): -0.003814
CHAN A2 (12V): -0.002500
CHAN A3 (5V): 0.000074
CHAN B0 (3.3V): -0.000327
CHAN B1 (3.15aV): -0.000131
CHAN B2 (3.15bV): -0.000322
CHAN B3 (GND): -0.000306
OPEN: -0.000497
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:26:15.266Z,1509445575.266 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:26:16.064Z,1509445576.064 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T10:26:16.064Z,1509445576.064 [NAL9602] Data Fault, FailCount= 1
2017-10-31T10:26:16.064Z,1509445576.064 [NAL9602](ERROR): Data Fault
2017-10-31T10:26:16.133Z,1509445576.133 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T10:26:16.464Z,1509445576.464 [NAL9602](INFO): Powering down
2017-10-31T10:26:17.335Z,1509445577.335 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T10:26:17.335Z,1509445577.335 [NAL9602] No Fault, FailCount= 1
2017-10-31T10:26:46.878Z,1509445606.878 [NAL9602](INFO): Powering up NAL9602
2017-10-31T10:26:58.074Z,1509445618.074 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:27:42.838Z,1509445662.838 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:27:53.637Z,1509445673.637 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002118
CHAN A1 (24V): -0.004728
CHAN A2 (12V): -0.001973
CHAN A3 (5V): -0.000233
CHAN B0 (3.3V): -0.000236
CHAN B1 (3.15aV): -0.000201
CHAN B2 (3.15bV): -0.000373
CHAN B3 (GND): 0.000130
OPEN: -0.000436
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:28:00.037Z,1509445680.037 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:28:00.038Z,1509445680.038 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T10:28:00.038Z,1509445680.038 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:28:00.066Z,1509445680.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:28:00.448Z,1509445680.448 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:28:00.448Z,1509445680.448 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T10:28:00.842Z,1509445680.842 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:28:00.842Z,1509445680.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:28:00.842Z,1509445680.842 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:29:17.924Z,1509445757.924 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T10:29:17.924Z,1509445757.924 [BPC1] Data Fault, FailCount= 1
2017-10-31T10:29:17.924Z,1509445757.924 [BPC1](ERROR): Data Fault
2017-10-31T10:29:18.011Z,1509445758.011 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T10:29:19.181Z,1509445759.181 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:29:19.181Z,1509445759.181 [BPC1] No Fault, FailCount= 1
2017-10-31T10:29:23.972Z,1509445763.972 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:29:34.795Z,1509445774.795 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134168
CHAN A1 (24V): -0.004197
CHAN A2 (12V): -0.002216
CHAN A3 (5V): 0.000209
CHAN B0 (3.3V): -0.000481
CHAN B1 (3.15aV): 0.000031
CHAN B2 (3.15bV): -0.000599
CHAN B3 (GND): -0.000253
OPEN: -0.000441
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:30:59.260Z,1509445859.260 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T10:30:59.261Z,1509445859.261 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T10:31:00.894Z,1509445860.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:31:00.894Z,1509445860.894 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T10:31:00.894Z,1509445860.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:31:00.932Z,1509445860.932 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:31:01.295Z,1509445861.295 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T10:26:01.1Z
2017-10-31T10:31:01.295Z,1509445861.295 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T10:31:01.295Z,1509445861.295 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T10:31:01.322Z,1509445861.322 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:31:01.322Z,1509445861.322 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T10:31:01.703Z,1509445861.703 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:31:01.703Z,1509445861.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:31:01.703Z,1509445861.703 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:31:05.607Z,1509445865.607 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:31:05.656Z,1509445865.656 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0296.lzma
2017-10-31T10:31:06.432Z,1509445866.432 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0296.lzma.bak
2017-10-31T10:31:06.432Z,1509445866.432 [DataOverHttps](INFO): SBD MOMSN=5178693
2017-10-31T10:31:15.868Z,1509445875.868 [DataOverHttps](INFO): Sending 646 bytes from file Logs/20171030T210256/Express0297.lzma
2017-10-31T10:31:16.672Z,1509445876.672 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0297.lzma.bak
2017-10-31T10:31:16.673Z,1509445876.673 [DataOverHttps](INFO): SBD MOMSN=5178695
2017-10-31T10:31:17.147Z,1509445877.147 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T10:31:17.147Z,1509445877.147 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T10:31:17.147Z,1509445877.147 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T10:31:23.995Z,1509445883.995 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002010
CHAN A1 (24V): -0.004759
CHAN A2 (12V): -0.002027
CHAN A3 (5V): -0.000241
CHAN B0 (3.3V): -0.000346
CHAN B1 (3.15aV): 0.000014
CHAN B2 (3.15bV): -0.000620
CHAN B3 (GND): 0.000106
OPEN: -0.000486
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:32:01.105Z,1509445921.105 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T10:32:31.713Z,1509445951.713 [NAL9602](INFO): Powering down
2017-10-31T10:32:54.193Z,1509445974.193 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:33:04.990Z,1509445984.990 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003121
CHAN A1 (24V): -0.004003
CHAN A2 (12V): -0.002407
CHAN A3 (5V): 0.000669
CHAN B0 (3.3V): -0.000177
CHAN B1 (3.15aV): 0.000289
CHAN B2 (3.15bV): 0.000030
CHAN B3 (GND): 0.000256
OPEN: -0.000226
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:33:28.733Z,1509446008.733 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T10:33:53.485Z,1509446033.485 [BPC1](ERROR): Failed to receive battery data
2017-10-31T10:33:53.485Z,1509446033.485 [BPC1] Communications Fault, FailCount= 1
2017-10-31T10:33:53.485Z,1509446033.485 [BPC1](ERROR): Communications Fault
2017-10-31T10:33:53.517Z,1509446033.517 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T10:33:54.705Z,1509446034.705 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:33:54.705Z,1509446034.705 [BPC1] No Fault, FailCount= 1
2017-10-31T10:34:01.873Z,1509446041.873 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:34:01.873Z,1509446041.873 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T10:34:01.873Z,1509446041.873 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:34:01.912Z,1509446041.912 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:34:02.321Z,1509446042.321 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:34:02.321Z,1509446042.321 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T10:34:02.679Z,1509446042.679 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:34:02.680Z,1509446042.680 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:34:02.680Z,1509446042.680 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:34:34.999Z,1509446074.999 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:34:45.784Z,1509446085.784 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135201
CHAN A1 (24V): -0.003177
CHAN A2 (12V): -0.002106
CHAN A3 (5V): 0.000006
CHAN B0 (3.3V): -0.000030
CHAN B1 (3.15aV): -0.000231
CHAN B2 (3.15bV): -0.000039
CHAN B3 (GND): -0.000154
OPEN: -0.000470
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:34:56.955Z,1509446096.955 [BPC1](ERROR): Failed to parse message.
2017-10-31T10:34:56.955Z,1509446096.955 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T10:34:56.956Z,1509446096.956 [BPC1] Data Fault, FailCount= 1
2017-10-31T10:34:56.956Z,1509446096.956 [BPC1](ERROR): Data Fault
2017-10-31T10:34:57.021Z,1509446097.021 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T10:34:58.206Z,1509446098.206 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:34:58.206Z,1509446098.206 [BPC1] No Fault, FailCount= 1
2017-10-31T10:36:15.804Z,1509446175.804 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:36:17.761Z,1509446177.761 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T10:36:17.761Z,1509446177.761 [Default:CheckIn:C.Wait] Stopped
2017-10-31T10:36:17.761Z,1509446177.761 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T10:36:17.762Z,1509446177.762 [Default:CheckIn:D] Running Loop=1
2017-10-31T10:36:18.169Z,1509446178.169 [Default:CheckIn:D] Stopped
2017-10-31T10:36:18.169Z,1509446178.169 [Default:CheckIn:E] Running Loop=1
2017-10-31T10:36:18.558Z,1509446178.558 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 719.174284 min 
2017-10-31T10:36:18.558Z,1509446178.558 [Default:CheckIn:E] Stopped
2017-10-31T10:36:18.558Z,1509446178.558 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T10:36:18.559Z,1509446178.559 [Default:CheckIn] Stopped
2017-10-31T10:36:18.559Z,1509446178.559 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T10:36:18.559Z,1509446178.559 [Default:CheckIn](INFO): Running loop #66
2017-10-31T10:36:18.559Z,1509446178.559 [Default:CheckIn] Running Loop=66
2017-10-31T10:36:18.559Z,1509446178.559 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T10:36:18.559Z,1509446178.559 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T10:36:21.958Z,1509446181.958 [NAL9602](INFO): Powering up
2017-10-31T10:36:28.397Z,1509446188.397 [BPC1](ERROR): Failed to receive battery data
2017-10-31T10:36:28.397Z,1509446188.397 [BPC1] Communications Fault, FailCount= 1
2017-10-31T10:36:28.398Z,1509446188.398 [BPC1](ERROR): Communications Fault
2017-10-31T10:36:28.420Z,1509446188.420 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T10:36:29.224Z,1509446189.224 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003209
CHAN A1 (24V): -0.003498
CHAN A2 (12V): -0.002333
CHAN A3 (5V): 0.000397
CHAN B0 (3.3V): 0.000204
CHAN B1 (3.15aV): -0.000169
CHAN B2 (3.15bV): -0.000570
CHAN B3 (GND): -0.000374
OPEN: -0.000386
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:36:29.640Z,1509446189.640 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:36:29.640Z,1509446189.640 [BPC1] No Fault, FailCount= 1
2017-10-31T10:36:32.763Z,1509446192.763 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:37:02.806Z,1509446222.806 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:37:02.806Z,1509446222.806 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T10:37:02.806Z,1509446222.806 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:37:02.832Z,1509446222.832 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:37:03.239Z,1509446223.239 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:37:03.239Z,1509446223.239 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T10:37:03.607Z,1509446223.607 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:37:03.607Z,1509446223.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:37:03.607Z,1509446223.607 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:37:04.769Z,1509446224.769 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T10:37:04.848Z,1509446224.848 [NAL9602](FAULT): received: 
+CSQ:1

OK21, 2, 0, 0, 0

OK
2017-10-31T10:37:04.848Z,1509446224.848 [NAL9602] Data Fault, FailCount= 2
2017-10-31T10:37:04.848Z,1509446224.848 [NAL9602](ERROR): Data Fault
2017-10-31T10:37:04.927Z,1509446224.927 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T10:37:05.162Z,1509446225.162 [NAL9602](INFO): Powering down
2017-10-31T10:37:06.029Z,1509446226.029 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T10:37:06.029Z,1509446226.029 [NAL9602] No Fault, FailCount= 2
2017-10-31T10:37:35.290Z,1509446255.290 [NAL9602](INFO): Powering up NAL9602
2017-10-31T10:37:46.487Z,1509446266.487 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:37:47.296Z,1509446267.296 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T10:37:47.296Z,1509446267.296 [NAL9602] Data Fault, FailCount= 3
2017-10-31T10:37:47.296Z,1509446267.296 [NAL9602](ERROR): Data Fault
2017-10-31T10:37:47.380Z,1509446267.380 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T10:37:47.689Z,1509446267.689 [NAL9602](INFO): Powering down
2017-10-31T10:37:48.542Z,1509446268.542 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T10:37:48.542Z,1509446268.542 [NAL9602] No Fault, FailCount= 3
2017-10-31T10:37:59.355Z,1509446279.355 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:38:10.173Z,1509446290.173 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135213
CHAN A1 (24V): -0.003498
CHAN A2 (12V): -0.002439
CHAN A3 (5V): 0.000139
CHAN B0 (3.3V): -0.000336
CHAN B1 (3.15aV): -0.000593
CHAN B2 (3.15bV): -0.000282
CHAN B3 (GND): 0.000067
OPEN: -0.000662
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:38:18.089Z,1509446298.089 [NAL9602](INFO): Powering up NAL9602
2017-10-31T10:38:29.279Z,1509446309.279 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:39:26.438Z,1509446366.438 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T10:39:26.439Z,1509446366.439 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T10:39:40.515Z,1509446380.515 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:39:51.334Z,1509446391.334 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003153
CHAN A1 (24V): -0.003789
CHAN A2 (12V): -0.002027
CHAN A3 (5V): -0.000209
CHAN B0 (3.3V): -0.000090
CHAN B1 (3.15aV): -0.000154
CHAN B2 (3.15bV): -0.000023
CHAN B3 (GND): 0.000130
OPEN: -0.000595
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:40:03.699Z,1509446403.699 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:40:03.699Z,1509446403.699 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T10:40:03.700Z,1509446403.700 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:40:03.725Z,1509446403.725 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:40:04.103Z,1509446404.103 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:40:04.103Z,1509446404.103 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T10:40:04.478Z,1509446404.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:40:04.478Z,1509446404.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:40:04.479Z,1509446404.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:40:38.985Z,1509446438.985 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T10:40:38.985Z,1509446438.985 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T10:41:04.227Z,1509446464.227 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T10:41:18.667Z,1509446478.667 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T10:36:18.6Z
2017-10-31T10:41:18.667Z,1509446478.667 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T10:41:18.667Z,1509446478.667 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T10:41:23.209Z,1509446483.209 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:41:23.249Z,1509446483.249 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0300.lzma
2017-10-31T10:41:24.025Z,1509446484.025 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0300.lzma.bak
2017-10-31T10:41:24.025Z,1509446484.025 [DataOverHttps](INFO): SBD MOMSN=5178712
2017-10-31T10:41:33.520Z,1509446493.520 [DataOverHttps](INFO): Sending 685 bytes from file Logs/20171030T210256/Express0301.lzma
2017-10-31T10:41:34.325Z,1509446494.325 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0301.lzma.bak
2017-10-31T10:41:34.325Z,1509446494.325 [DataOverHttps](INFO): SBD MOMSN=5178714
2017-10-31T10:41:34.798Z,1509446494.798 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T10:41:34.798Z,1509446494.798 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T10:41:34.798Z,1509446494.798 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T10:41:38.453Z,1509446498.453 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T10:41:39.076Z,1509446499.076 [PNI_TCM](ERROR): CRC does not match. Expected:0x54395 got:0x16808
2017-10-31T10:41:40.261Z,1509446500.261 [PNI_TCM](ERROR): CRC does not match. Expected:0x53519 got:0x49073
2017-10-31T10:41:41.519Z,1509446501.519 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134365
CHAN A1 (24V): -0.003995
CHAN A2 (12V): -0.002556
CHAN A3 (5V): -0.000174
CHAN B0 (3.3V): -0.000564
CHAN B1 (3.15aV): -0.000664
CHAN B2 (3.15bV): -0.000526
CHAN B3 (GND): -0.000371
OPEN: -0.000286
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:41:43.472Z,1509446503.472 [PNI_TCM](ERROR): CRC does not match. Expected:0x33256 got:0x22813
2017-10-31T10:41:46.677Z,1509446506.677 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16542
2017-10-31T10:41:48.266Z,1509446508.266 [PNI_TCM](ERROR): CRC does not match. Expected:0x45372 got:0x6978
2017-10-31T10:41:54.672Z,1509446514.672 [PNI_TCM](ERROR): CRC does not match. Expected:0x43045 got:0x129
2017-10-31T10:42:08.634Z,1509446528.634 [NAL9602](INFO): Powering down
2017-10-31T10:42:13.864Z,1509446533.864 [PNI_TCM](ERROR): CRC does not match. Expected:0x33389 got:0x45813
2017-10-31T10:42:15.470Z,1509446535.470 [PNI_TCM](ERROR): CRC does not match. Expected:0x33959 got:0x45767
2017-10-31T10:42:18.663Z,1509446538.663 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T10:42:20.264Z,1509446540.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x49365 got:0x49207
2017-10-31T10:42:23.458Z,1509446543.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x32602 got:0x6335
2017-10-31T10:42:25.077Z,1509446545.077 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T10:42:31.466Z,1509446551.466 [PNI_TCM](ERROR): CRC does not match. Expected:0x28029 got:0x43136
2017-10-31T10:42:33.061Z,1509446553.061 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16542
2017-10-31T10:42:34.667Z,1509446554.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x8119 got:0x51473
2017-10-31T10:43:04.627Z,1509446584.627 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T10:43:04.627Z,1509446584.627 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T10:43:04.628Z,1509446584.628 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T10:43:04.641Z,1509446584.641 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:43:04.642Z,1509446584.642 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T10:43:11.860Z,1509446591.860 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:43:22.645Z,1509446602.645 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003132
CHAN A1 (24V): -0.004113
CHAN A2 (12V): -0.002248
CHAN A3 (5V): 0.000209
CHAN B0 (3.3V): 0.000341
CHAN B1 (3.15aV): -0.000208
CHAN B2 (3.15bV): 0.000054
CHAN B3 (GND): 0.000414
OPEN: -0.000370
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:43:29.054Z,1509446609.054 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T10:43:40.847Z,1509446620.847 [BPC1](ERROR): Failed to receive battery data
2017-10-31T10:43:40.848Z,1509446620.848 [BPC1] Communications Fault, FailCount= 1
2017-10-31T10:43:40.848Z,1509446620.848 [BPC1](ERROR): Communications Fault
2017-10-31T10:43:40.908Z,1509446620.908 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T10:43:42.082Z,1509446622.082 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:43:42.082Z,1509446622.082 [BPC1] No Fault, FailCount= 1
2017-10-31T10:44:27.645Z,1509446667.645 [BPC1](ERROR): Failed to receive battery data
2017-10-31T10:44:27.645Z,1509446667.645 [BPC1] Communications Fault, FailCount= 1
2017-10-31T10:44:27.645Z,1509446667.645 [BPC1](ERROR): Communications Fault
2017-10-31T10:44:27.711Z,1509446667.711 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T10:44:28.869Z,1509446668.869 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:44:28.869Z,1509446668.869 [BPC1] No Fault, FailCount= 1
2017-10-31T10:44:52.728Z,1509446692.728 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:45:03.477Z,1509446703.477 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134816
CHAN A1 (24V): -0.003604
CHAN A2 (12V): -0.002160
CHAN A3 (5V): 0.000385
CHAN B0 (3.3V): -0.000043
CHAN B1 (3.15aV): -0.000040
CHAN B2 (3.15bV): -0.000419
CHAN B3 (GND): -0.000071
OPEN: -0.000364
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:46:18.602Z,1509446778.602 [BPC1](ERROR): Failed to receive battery data
2017-10-31T10:46:18.602Z,1509446778.602 [BPC1] Communications Fault, FailCount= 1
2017-10-31T10:46:18.602Z,1509446778.602 [BPC1](ERROR): Communications Fault
2017-10-31T10:46:18.626Z,1509446778.626 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T10:46:19.827Z,1509446779.827 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:46:19.827Z,1509446779.827 [BPC1] No Fault, FailCount= 1
2017-10-31T10:46:33.845Z,1509446793.845 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:46:35.430Z,1509446795.430 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T10:46:35.431Z,1509446795.431 [Default:CheckIn:C.Wait] Stopped
2017-10-31T10:46:35.431Z,1509446795.431 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T10:46:35.431Z,1509446795.431 [Default:CheckIn:D] Running Loop=1
2017-10-31T10:46:35.809Z,1509446795.809 [Default:CheckIn:D] Stopped
2017-10-31T10:46:35.809Z,1509446795.809 [Default:CheckIn:E] Running Loop=1
2017-10-31T10:46:36.239Z,1509446796.239 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 729.468229 min 
2017-10-31T10:46:36.240Z,1509446796.240 [Default:CheckIn:E] Stopped
2017-10-31T10:46:36.240Z,1509446796.240 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T10:46:36.240Z,1509446796.240 [Default:CheckIn] Stopped
2017-10-31T10:46:36.240Z,1509446796.240 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T10:46:36.240Z,1509446796.240 [Default:CheckIn](INFO): Running loop #67
2017-10-31T10:46:36.240Z,1509446796.240 [Default:CheckIn] Running Loop=67
2017-10-31T10:46:36.240Z,1509446796.240 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T10:46:36.240Z,1509446796.240 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T10:46:39.868Z,1509446799.868 [NAL9602](INFO): Powering up
2017-10-31T10:46:46.960Z,1509446806.960 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004148
CHAN A1 (24V): -0.004092
CHAN A2 (12V): -0.002815
CHAN A3 (5V): 0.000203
CHAN B0 (3.3V): 0.000297
CHAN B1 (3.15aV): -0.000401
CHAN B2 (3.15bV): -0.000157
CHAN B3 (GND): -0.000539
OPEN: -0.000444
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:46:50.900Z,1509446810.900 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:47:22.897Z,1509446842.897 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T10:47:22.981Z,1509446842.981 [NAL9602](FAULT): received: 
+CSQ:0

OK21, 2, 0, 0, 0

OK
2017-10-31T10:47:22.981Z,1509446842.981 [NAL9602] Data Fault, FailCount= 4
2017-10-31T10:47:22.981Z,1509446842.981 [NAL9602](ERROR): Data Fault
2017-10-31T10:47:23.078Z,1509446843.078 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T10:47:23.295Z,1509446843.295 [NAL9602](INFO): Powering down
2017-10-31T10:47:24.147Z,1509446844.147 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T10:47:24.147Z,1509446844.147 [NAL9602] No Fault, FailCount= 4
2017-10-31T10:47:53.424Z,1509446873.424 [NAL9602](INFO): Powering up NAL9602
2017-10-31T10:47:53.457Z,1509446873.457 [PNI_TCM](ERROR): CRC does not match. Expected:0x52954 got:0x49744
2017-10-31T10:48:04.236Z,1509446884.236 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:48:05.884Z,1509446885.884 [PNI_TCM](ERROR): CRC does not match. Expected:0x34960 got:0x53086
2017-10-31T10:48:17.088Z,1509446897.088 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:48:26.631Z,1509446906.631 [NAL9602](INFO): SBD MO Status=2, MOMSN=3321, MT Status=2, MTMSN=0
2017-10-31T10:48:26.631Z,1509446906.631 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T10:48:28.329Z,1509446908.329 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134521
CHAN A1 (24V): -0.004047
CHAN A2 (12V): -0.002117
CHAN A3 (5V): -0.000145
CHAN B0 (3.3V): -0.000311
CHAN B1 (3.15aV): 0.000099
CHAN B2 (3.15bV): 0.000136
CHAN B3 (GND): 0.000383
OPEN: -0.000214
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:48:31.474Z,1509446911.474 [PNI_TCM](ERROR): CRC does not match. Expected:0x12209 got:0x62748
2017-10-31T10:48:32.249Z,1509446912.249 [PNI_TCM](ERROR): CRC does not match. Expected:0x914 got:0x63566
2017-10-31T10:48:54.180Z,1509446934.180 [NAL9602](INFO): SBD MO Status=0, MOMSN=3321, MT Status=0, MTMSN=0
2017-10-31T10:48:54.180Z,1509446934.180 [NAL9602](INFO): No messages in MT queue
2017-10-31T10:48:54.980Z,1509446934.980 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T10:48:54.980Z,1509446934.980 [NAL9602] Data Fault, FailCount= 1
2017-10-31T10:48:54.980Z,1509446934.980 [NAL9602](ERROR): Data Fault
2017-10-31T10:48:55.061Z,1509446935.061 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T10:48:55.381Z,1509446935.381 [NAL9602](INFO): Powering down
2017-10-31T10:48:56.268Z,1509446936.268 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T10:48:56.268Z,1509446936.268 [NAL9602] No Fault, FailCount= 1
2017-10-31T10:49:25.781Z,1509446965.781 [NAL9602](INFO): Powering up NAL9602
2017-10-31T10:49:36.588Z,1509446976.588 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:49:58.478Z,1509446998.478 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:50:09.271Z,1509447009.271 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003145
CHAN A1 (24V): -0.003606
CHAN A2 (12V): -0.002220
CHAN A3 (5V): 0.000029
CHAN B0 (3.3V): -0.000275
CHAN B1 (3.15aV): -0.000407
CHAN B2 (3.15bV): -0.000537
CHAN B3 (GND): -0.000510
OPEN: -0.000344
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:51:36.264Z,1509447096.264 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T10:46:36.2Z
2017-10-31T10:51:36.264Z,1509447096.264 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T10:51:36.265Z,1509447096.265 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T10:51:40.946Z,1509447100.946 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:51:41.028Z,1509447101.028 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0304.lzma
2017-10-31T10:51:41.765Z,1509447101.765 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0304.lzma.bak
2017-10-31T10:51:41.766Z,1509447101.766 [DataOverHttps](INFO): SBD MOMSN=5178733
2017-10-31T10:51:56.370Z,1509447116.370 [DataOverHttps](INFO): Sending 755 bytes from file Logs/20171030T210256/Express0305.lzma
2017-10-31T10:51:57.178Z,1509447117.178 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0305.lzma.bak
2017-10-31T10:51:57.178Z,1509447117.178 [DataOverHttps](INFO): SBD MOMSN=5178735
2017-10-31T10:51:57.689Z,1509447117.689 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T10:51:57.689Z,1509447117.689 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T10:51:57.689Z,1509447117.689 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T10:52:01.540Z,1509447121.540 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002907
CHAN A1 (24V): -0.004628
CHAN A2 (12V): -0.002059
CHAN A3 (5V): 0.000607
CHAN B0 (3.3V): -0.000142
CHAN B1 (3.15aV): -0.000108
CHAN B2 (3.15bV): 0.000133
CHAN B3 (GND): -0.000498
OPEN: -0.000445
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:52:04.299Z,1509447124.299 [PNI_TCM](ERROR): CRC does not match. Expected:0x36740 got:0x49070
2017-10-31T10:52:05.898Z,1509447125.898 [PNI_TCM](ERROR): CRC does not match. Expected:0x50265 got:0x49074
2017-10-31T10:52:07.480Z,1509447127.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x50069 got:0x16938
2017-10-31T10:52:09.084Z,1509447129.084 [PNI_TCM](ERROR): CRC does not match. Expected:0x9380 got:0x8565
2017-10-31T10:52:11.062Z,1509447131.062 [NAL9602](INFO): Powering down
2017-10-31T10:52:13.895Z,1509447133.895 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T10:52:15.482Z,1509447135.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x16721 got:0x57038
2017-10-31T10:52:23.496Z,1509447143.496 [PNI_TCM](ERROR): CRC does not match. Expected:0x22414 got:0x44694
2017-10-31T10:52:42.685Z,1509447162.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x48464 got:0x33309
2017-10-31T10:52:49.096Z,1509447169.096 [PNI_TCM](ERROR): CRC does not match. Expected:0x12661 got:0x53932
2017-10-31T10:52:50.685Z,1509447170.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x59884 got:0x16981
2017-10-31T10:52:52.288Z,1509447172.288 [PNI_TCM](ERROR): CRC does not match. Expected:0x2388 got:0x29209
2017-10-31T10:52:53.884Z,1509447173.884 [PNI_TCM](ERROR): CRC does not match. Expected:0x11303 got:0x42944
2017-10-31T10:53:29.323Z,1509447209.323 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T10:53:31.734Z,1509447211.734 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:53:32.895Z,1509447212.895 [BPC1](ERROR): Failed to receive battery data
2017-10-31T10:53:32.895Z,1509447212.895 [BPC1] Communications Fault, FailCount= 1
2017-10-31T10:53:32.895Z,1509447212.895 [BPC1](ERROR): Communications Fault
2017-10-31T10:53:32.925Z,1509447212.925 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T10:53:34.137Z,1509447214.137 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:53:34.137Z,1509447214.137 [BPC1] No Fault, FailCount= 1
2017-10-31T10:53:42.514Z,1509447222.514 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134681
CHAN A1 (24V): -0.003311
CHAN A2 (12V): -0.002089
CHAN A3 (5V): 0.000109
CHAN B0 (3.3V): -0.000099
CHAN B1 (3.15aV): -0.000475
CHAN B2 (3.15bV): -0.000619
CHAN B3 (GND): -0.000166
OPEN: -0.000510
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:54:04.292Z,1509447244.292 [PNI_TCM](ERROR): CRC does not match. Expected:0x54970 got:0x57931
2017-10-31T10:54:05.887Z,1509447245.887 [PNI_TCM](ERROR): CRC does not match. Expected:0x63630 got:0x21954
2017-10-31T10:54:12.281Z,1509447252.281 [PNI_TCM](ERROR): CRC does not match. Expected:0x37912 got:0x6591
2017-10-31T10:54:13.891Z,1509447253.891 [PNI_TCM](ERROR): CRC does not match. Expected:0x57594 got:0x6591
2017-10-31T10:54:18.705Z,1509447258.705 [PNI_TCM](ERROR): CRC does not match. Expected:0x36783 got:0x20883
2017-10-31T10:54:20.295Z,1509447260.295 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T10:54:23.894Z,1509447263.894 [PNI_TCM](ERROR): CRC does not match. Expected:0x17286 got:0x35864
2017-10-31T10:54:28.286Z,1509447268.286 [PNI_TCM](ERROR): CRC does not match. Expected:0x44714 got:0x45682
2017-10-31T10:54:37.887Z,1509447277.887 [PNI_TCM](ERROR): CRC does not match. Expected:0x3847 got:0x48583
2017-10-31T10:54:42.690Z,1509447282.690 [PNI_TCM](ERROR): CRC does not match. Expected:0x64756 got:0x21969
2017-10-31T10:54:45.886Z,1509447285.886 [PNI_TCM](ERROR): CRC does not match. Expected:0x25144 got:0x45550
2017-10-31T10:54:49.088Z,1509447289.088 [PNI_TCM](ERROR): CRC does not match. Expected:0x49703 got:0x16807
2017-10-31T10:54:52.294Z,1509447292.294 [PNI_TCM](ERROR): CRC does not match. Expected:0x12477 got:0x797
2017-10-31T10:54:58.693Z,1509447298.693 [PNI_TCM](ERROR): CRC does not match. Expected:0x27075 got:0x16981
2017-10-31T10:55:12.871Z,1509447312.871 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:55:23.674Z,1509447323.674 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.005157
CHAN A1 (24V): -0.003592
CHAN A2 (12V): -0.002015
CHAN A3 (5V): -0.000033
CHAN B0 (3.3V): -0.000025
CHAN B1 (3.15aV): -0.000540
CHAN B2 (3.15bV): 0.000051
CHAN B3 (GND): -0.000292
OPEN: -0.000267
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:56:02.212Z,1509447362.212 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T10:56:02.212Z,1509447362.212 [BPC1] Data Fault, FailCount= 1
2017-10-31T10:56:02.212Z,1509447362.212 [BPC1](ERROR): Data Fault
2017-10-31T10:56:02.240Z,1509447362.240 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T10:56:03.135Z,1509447363.135 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T10:56:03.135Z,1509447363.135 [BPC1] No Fault, FailCount= 1
2017-10-31T10:56:04.296Z,1509447364.296 [PNI_TCM](ERROR): CRC does not match. Expected:0x13981 got:0x43136
2017-10-31T10:56:05.892Z,1509447365.892 [PNI_TCM](ERROR): CRC does not match. Expected:0x48177 got:0x16981
2017-10-31T10:56:07.490Z,1509447367.490 [PNI_TCM](ERROR): CRC does not match. Expected:0x6805 got:0x44668
2017-10-31T10:56:09.087Z,1509447369.087 [PNI_TCM](ERROR): CRC does not match. Expected:0x60894 got:0x45507
2017-10-31T10:56:12.305Z,1509447372.305 [PNI_TCM](ERROR): CRC does not match. Expected:0x64476 got:0x50772
2017-10-31T10:56:21.893Z,1509447381.893 [PNI_TCM](ERROR): CRC does not match. Expected:0x49767 got:0x21939
2017-10-31T10:56:25.085Z,1509447385.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x34281 got:0x60433
2017-10-31T10:56:26.697Z,1509447386.697 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T10:56:28.289Z,1509447388.289 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T10:56:29.886Z,1509447389.886 [PNI_TCM](ERROR): CRC does not match. Expected:0x2466 got:0x45799
2017-10-31T10:56:34.691Z,1509447394.691 [PNI_TCM](ERROR): CRC does not match. Expected:0x62477 got:0x6978
2017-10-31T10:56:37.888Z,1509447397.888 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T10:56:39.491Z,1509447399.491 [PNI_TCM](ERROR): CRC does not match. Expected:0x58714 got:0x32536
2017-10-31T10:56:41.092Z,1509447401.092 [PNI_TCM](ERROR): CRC does not match. Expected:0x37355 got:0x53506
2017-10-31T10:56:42.693Z,1509447402.693 [PNI_TCM](ERROR): CRC does not match. Expected:0x59145 got:0x49070
2017-10-31T10:56:45.893Z,1509447405.893 [PNI_TCM](ERROR): CRC does not match. Expected:0x19786 got:0x16938
2017-10-31T10:56:49.482Z,1509447409.482 [PNI_TCM](ERROR): CRC does not match. Expected:0x45556 got:0x60181
2017-10-31T10:56:51.085Z,1509447411.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x39214 got:0x16808
2017-10-31T10:56:52.291Z,1509447412.291 [PNI_TCM](ERROR): CRC does not match. Expected:0x27488 got:0x6335
2017-10-31T10:56:53.889Z,1509447413.889 [PNI_TCM](ERROR): CRC does not match. Expected:0x1169 got:0x49070
2017-10-31T10:56:53.940Z,1509447413.940 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:56:55.490Z,1509447415.490 [PNI_TCM](ERROR): CRC does not match. Expected:0x49690 got:0x16981
2017-10-31T10:56:57.096Z,1509447417.096 [PNI_TCM](ERROR): CRC does not match. Expected:0x54875 got:0x45542
2017-10-31T10:56:58.338Z,1509447418.338 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T10:56:58.338Z,1509447418.338 [Default:CheckIn:C.Wait] Stopped
2017-10-31T10:56:58.338Z,1509447418.338 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T10:56:58.338Z,1509447418.338 [Default:CheckIn:D] Running Loop=1
2017-10-31T10:56:58.692Z,1509447418.692 [PNI_TCM](ERROR): CRC does not match. Expected:0x59386 got:0x7360
2017-10-31T10:56:58.734Z,1509447418.734 [Default:CheckIn:D] Stopped
2017-10-31T10:56:58.734Z,1509447418.734 [Default:CheckIn:E] Running Loop=1
2017-10-31T10:56:59.115Z,1509447419.115 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 739.850326 min 
2017-10-31T10:56:59.116Z,1509447419.116 [Default:CheckIn:E] Stopped
2017-10-31T10:56:59.116Z,1509447419.116 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T10:56:59.116Z,1509447419.116 [Default:CheckIn] Stopped
2017-10-31T10:56:59.117Z,1509447419.117 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T10:56:59.117Z,1509447419.117 [Default:CheckIn](INFO): Running loop #68
2017-10-31T10:56:59.117Z,1509447419.117 [Default:CheckIn] Running Loop=68
2017-10-31T10:56:59.117Z,1509447419.117 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T10:56:59.117Z,1509447419.117 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T10:57:02.752Z,1509447422.752 [NAL9602](INFO): Powering up
2017-10-31T10:57:07.961Z,1509447427.961 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.005284
CHAN A1 (24V): -0.003232
CHAN A2 (12V): -0.001964
CHAN A3 (5V): 0.000292
CHAN B0 (3.3V): -0.000075
CHAN B1 (3.15aV): 0.000708
CHAN B2 (3.15bV): -0.000749
CHAN B3 (GND): -0.000515
OPEN: -0.000214
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:57:13.897Z,1509447433.897 [NAL9602](INFO): NAL9602 initialized
2017-10-31T10:58:04.914Z,1509447484.914 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T10:58:04.914Z,1509447484.914 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T10:58:05.294Z,1509447485.294 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T10:58:05.294Z,1509447485.294 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T10:58:05.294Z,1509447485.294 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T10:58:27.250Z,1509447507.250 [NAL9602](INFO): SBD MO Status=2, MOMSN=3322, MT Status=2, MTMSN=0
2017-10-31T10:58:27.250Z,1509447507.250 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T10:58:38.126Z,1509447518.126 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T10:58:48.917Z,1509447528.917 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134515
CHAN A1 (24V): -0.003614
CHAN A2 (12V): -0.001936
CHAN A3 (5V): 0.000612
CHAN B0 (3.3V): -0.000137
CHAN B1 (3.15aV): -0.000302
CHAN B2 (3.15bV): -0.000491
CHAN B3 (GND): -0.000072
OPEN: -0.000341
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T10:59:03.491Z,1509447543.491 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T10:59:08.301Z,1509447548.301 [PNI_TCM](ERROR): CRC does not match. Expected:0x30562 got:0x49075
2017-10-31T10:59:09.892Z,1509447549.892 [PNI_TCM](ERROR): CRC does not match. Expected:0x8561 got:0x49073
2017-10-31T10:59:13.901Z,1509447553.901 [PNI_TCM](ERROR): CRC does not match. Expected:0x11913 got:0x53533
2017-10-31T10:59:14.695Z,1509447554.695 [PNI_TCM](ERROR): CRC does not match. Expected:0x19227 got:0x24583
2017-10-31T10:59:19.491Z,1509447559.491 [PNI_TCM](ERROR): CRC does not match. Expected:0x52279 got:0x49070
2017-10-31T10:59:19.897Z,1509447559.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x5934 got:0x0
2017-10-31T10:59:21.880Z,1509447561.880 [PNI_TCM](ERROR): CRC does not match. Expected:0x38500 got:0x49153
2017-10-31T10:59:27.496Z,1509447567.496 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T10:59:32.289Z,1509447572.289 [PNI_TCM](ERROR): CRC does not match. Expected:0x59691 got:0x16981
2017-10-31T10:59:32.700Z,1509447572.700 [PNI_TCM](ERROR): CRC does not match. Expected:0x54199 got:0x10971
2017-10-31T10:59:35.887Z,1509447575.887 [PNI_TCM](ERROR): CRC does not match. Expected:0x9870 got:0x6335
2017-10-31T10:59:51.059Z,1509447591.059 [NAL9602](INFO): SBD MO Status=0, MOMSN=3322, MT Status=0, MTMSN=0
2017-10-31T10:59:51.059Z,1509447591.059 [NAL9602](INFO): No messages in MT queue
2017-10-31T10:59:51.495Z,1509447591.495 [PNI_TCM](ERROR): CRC does not match. Expected:0x5261 got:0x6591
2017-10-31T10:59:51.855Z,1509447591.855 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T10:59:51.855Z,1509447591.855 [NAL9602] Data Fault, FailCount= 1
2017-10-31T10:59:51.855Z,1509447591.855 [NAL9602](ERROR): Data Fault
2017-10-31T10:59:51.941Z,1509447591.941 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T10:59:52.255Z,1509447592.255 [NAL9602](INFO): Powering down
2017-10-31T10:59:53.126Z,1509447593.126 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T10:59:53.127Z,1509447593.127 [NAL9602] No Fault, FailCount= 1
2017-10-31T11:00:19.027Z,1509447619.027 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:00:22.559Z,1509447622.559 [NAL9602](INFO): Powering up NAL9602
2017-10-31T11:00:29.822Z,1509447629.822 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003637
CHAN A1 (24V): -0.003745
CHAN A2 (12V): -0.002413
CHAN A3 (5V): -0.000121
CHAN B0 (3.3V): -0.000213
CHAN B1 (3.15aV): 4.767929
CHAN B2 (3.15bV): -0.000064
CHAN B3 (GND): 0.000285
OPEN: -0.000576
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:00:33.767Z,1509447633.767 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:01:05.584Z,1509447665.584 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:01:05.585Z,1509447665.585 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T11:01:05.585Z,1509447665.585 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:01:05.616Z,1509447665.616 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:01:05.991Z,1509447665.991 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:01:05.991Z,1509447665.991 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T11:01:06.368Z,1509447666.368 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:01:06.368Z,1509447666.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:01:06.368Z,1509447666.368 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:01:59.188Z,1509447719.188 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T10:56:59.1Z
2017-10-31T11:01:59.188Z,1509447719.188 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T11:01:59.188Z,1509447719.188 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T11:02:00.011Z,1509447720.011 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:02:03.296Z,1509447723.296 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0308.lzma
2017-10-31T11:02:04.066Z,1509447724.066 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0308.lzma.bak
2017-10-31T11:02:04.066Z,1509447724.066 [DataOverHttps](INFO): SBD MOMSN=5178755
2017-10-31T11:02:13.401Z,1509447733.401 [DataOverHttps](INFO): Sending 588 bytes from file Logs/20171030T210256/Express0309.lzma
2017-10-31T11:02:14.214Z,1509447734.214 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0309.lzma.bak
2017-10-31T11:02:14.214Z,1509447734.214 [DataOverHttps](INFO): SBD MOMSN=5178757
2017-10-31T11:02:14.703Z,1509447734.703 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T11:02:14.703Z,1509447734.703 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T11:02:14.704Z,1509447734.704 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T11:02:21.388Z,1509447741.388 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002629
CHAN A1 (24V): -0.004203
CHAN A2 (12V): -0.002076
CHAN A3 (5V): 0.000453
CHAN B0 (3.3V): -0.000422
CHAN B1 (3.15aV): -0.000585
CHAN B2 (3.15bV): -0.000496
CHAN B3 (GND): -0.000109
OPEN: -0.000506
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:02:30.125Z,1509447750.125 [NAL9602](INFO): Powering down
2017-10-31T11:03:28.042Z,1509447808.042 [BPC1](ERROR): Failed to receive battery data
2017-10-31T11:03:28.042Z,1509447808.042 [BPC1] Communications Fault, FailCount= 1
2017-10-31T11:03:28.042Z,1509447808.042 [BPC1](ERROR): Communications Fault
2017-10-31T11:03:28.123Z,1509447808.123 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T11:03:29.295Z,1509447809.295 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:03:29.295Z,1509447809.295 [BPC1] No Fault, FailCount= 1
2017-10-31T11:03:29.739Z,1509447809.739 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T11:03:51.678Z,1509447831.678 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:04:02.500Z,1509447842.500 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135228
CHAN A1 (24V): -0.003411
CHAN A2 (12V): -0.002053
CHAN A3 (5V): 0.000227
CHAN B0 (3.3V): 0.000413
CHAN B1 (3.15aV): -0.000575
CHAN B2 (3.15bV): -0.000457
CHAN B3 (GND): -0.000015
OPEN: -0.000277
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:04:06.472Z,1509447846.472 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:04:06.473Z,1509447846.473 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T11:04:06.473Z,1509447846.473 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:04:06.486Z,1509447846.486 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:04:06.882Z,1509447846.882 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:04:06.882Z,1509447846.882 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T11:04:07.266Z,1509447847.266 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:04:07.266Z,1509447847.266 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:04:07.267Z,1509447847.267 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:05:32.543Z,1509447932.543 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:05:43.339Z,1509447943.339 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134516
CHAN A1 (24V): -0.003555
CHAN A2 (12V): -0.002515
CHAN A3 (5V): 0.000112
CHAN B0 (3.3V): -0.000112
CHAN B1 (3.15aV): -0.000078
CHAN B2 (3.15bV): -0.000160
CHAN B3 (GND): -0.000179
OPEN: -0.000836
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:05:58.911Z,1509447958.911 [BPC1](ERROR): Failed to receive battery data
2017-10-31T11:05:58.911Z,1509447958.911 [BPC1] Communications Fault, FailCount= 1
2017-10-31T11:05:58.911Z,1509447958.911 [BPC1](ERROR): Communications Fault
2017-10-31T11:05:58.934Z,1509447958.934 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T11:06:00.142Z,1509447960.142 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:06:00.142Z,1509447960.142 [BPC1] No Fault, FailCount= 1
2017-10-31T11:06:33.891Z,1509447993.891 [PNI_TCM](ERROR): CRC does not match. Expected:0x15919 got:0x16807
2017-10-31T11:06:53.899Z,1509448013.899 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T11:06:54.301Z,1509448014.301 [PNI_TCM](ERROR): CRC does not match. Expected:0x31594 got:0x6591
2017-10-31T11:06:55.508Z,1509448015.508 [PNI_TCM](ERROR): CRC does not match. Expected:0x34719 got:0x44720
2017-10-31T11:06:56.290Z,1509448016.290 [PNI_TCM](ERROR): CRC does not match. Expected:0x28585 got:0x49070
2017-10-31T11:07:05.112Z,1509448025.112 [PNI_TCM](ERROR): CRC does not match. Expected:0x53123 got:0x6591
2017-10-31T11:07:07.527Z,1509448027.527 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:07:07.528Z,1509448027.528 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T11:07:07.528Z,1509448027.528 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:07:07.555Z,1509448027.555 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:07:07.957Z,1509448027.957 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:07:07.957Z,1509448027.957 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T11:07:08.326Z,1509448028.326 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:07:08.327Z,1509448028.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:07:08.327Z,1509448028.327 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:07:13.542Z,1509448033.542 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:07:15.128Z,1509448035.128 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T11:07:15.128Z,1509448035.128 [Default:CheckIn:C.Wait] Stopped
2017-10-31T11:07:15.128Z,1509448035.128 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T11:07:15.128Z,1509448035.128 [Default:CheckIn:D] Running Loop=1
2017-10-31T11:07:15.519Z,1509448035.519 [Default:CheckIn:D] Stopped
2017-10-31T11:07:15.519Z,1509448035.519 [Default:CheckIn:E] Running Loop=1
2017-10-31T11:07:15.930Z,1509448035.930 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 750.130078 min 
2017-10-31T11:07:15.930Z,1509448035.930 [Default:CheckIn:E] Stopped
2017-10-31T11:07:15.930Z,1509448035.930 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T11:07:15.930Z,1509448035.930 [Default:CheckIn] Stopped
2017-10-31T11:07:15.930Z,1509448035.930 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T11:07:15.931Z,1509448035.931 [Default:CheckIn](INFO): Running loop #69
2017-10-31T11:07:15.931Z,1509448035.931 [Default:CheckIn] Running Loop=69
2017-10-31T11:07:15.931Z,1509448035.931 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T11:07:15.931Z,1509448035.931 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T11:07:19.606Z,1509448039.606 [NAL9602](INFO): Powering up
2017-10-31T11:07:26.684Z,1509448046.684 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135219
CHAN A1 (24V): -0.003406
CHAN A2 (12V): -0.002136
CHAN A3 (5V): 0.000162
CHAN B0 (3.3V): -0.000124
CHAN B1 (3.15aV): 0.000208
CHAN B2 (3.15bV): -0.000463
CHAN B3 (GND): -0.000006
OPEN: -0.000479
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:07:30.592Z,1509448050.592 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:08:52.330Z,1509448132.330 [NAL9602](INFO): SBD MO Status=2, MOMSN=3323, MT Status=2, MTMSN=0
2017-10-31T11:08:52.331Z,1509448132.331 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T11:08:56.809Z,1509448136.809 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:09:07.638Z,1509448147.638 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134662
CHAN A1 (24V): -0.004182
CHAN A2 (12V): -0.002067
CHAN A3 (5V): 0.000385
CHAN B0 (3.3V): -0.000096
CHAN B1 (3.15aV): -0.000354
CHAN B2 (3.15bV): -0.000328
CHAN B3 (GND): -0.000684
OPEN: -0.000311
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:09:34.161Z,1509448174.161 [NAL9602](INFO): SBD MO Status=0, MOMSN=3323, MT Status=0, MTMSN=0
2017-10-31T11:09:34.161Z,1509448174.161 [NAL9602](INFO): No messages in MT queue
2017-10-31T11:09:35.365Z,1509448175.365 [NAL9602](INFO): GPS fix at 20171031T110931: (36.802742, -121.787947)
2017-10-31T11:09:35.438Z,1509448175.438 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T11:09:35.438Z,1509448175.438 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T11:09:40.040Z,1509448180.040 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20171030T210256/Courier0312.lzma
2017-10-31T11:09:40.792Z,1509448180.792 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0312.lzma.bak
2017-10-31T11:09:40.792Z,1509448180.792 [DataOverHttps](INFO): SBD MOMSN=5178773
2017-10-31T11:09:50.020Z,1509448190.020 [DataOverHttps](INFO): Sending 484 bytes from file Logs/20171030T210256/Express0313.lzma
2017-10-31T11:09:50.763Z,1509448190.763 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0313.lzma.bak
2017-10-31T11:09:50.764Z,1509448190.764 [DataOverHttps](INFO): SBD MOMSN=5178776
2017-10-31T11:09:51.233Z,1509448191.233 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T11:09:51.233Z,1509448191.233 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T11:09:51.233Z,1509448191.233 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T11:10:08.379Z,1509448208.379 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:10:08.379Z,1509448208.379 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T11:10:08.379Z,1509448208.379 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:10:08.409Z,1509448208.409 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:10:08.846Z,1509448208.846 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:10:08.846Z,1509448208.846 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T11:10:09.190Z,1509448209.190 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:10:09.190Z,1509448209.190 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:10:09.191Z,1509448209.191 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:10:10.334Z,1509448210.334 [NAL9602](INFO): Powering down
2017-10-31T11:10:37.986Z,1509448237.986 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:10:48.812Z,1509448248.812 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003550
CHAN A1 (24V): -0.004406
CHAN A2 (12V): -0.002554
CHAN A3 (5V): 0.000138
CHAN B0 (3.3V): -0.000230
CHAN B1 (3.15aV): -0.000098
CHAN B2 (3.15bV): -0.000494
CHAN B3 (GND): 0.000288
OPEN: -0.000336
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:12:19.082Z,1509448339.082 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:12:29.886Z,1509448349.886 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003288
CHAN A1 (24V): -0.003395
CHAN A2 (12V): -0.002186
CHAN A3 (5V): 0.000198
CHAN B0 (3.3V): -0.000119
CHAN B1 (3.15aV): -0.000170
CHAN B2 (3.15bV): -0.000498
CHAN B3 (GND): -0.000006
OPEN: -0.000401
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:13:09.326Z,1509448389.326 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:13:09.327Z,1509448389.327 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T11:13:09.327Z,1509448389.327 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:13:09.340Z,1509448389.340 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:13:09.744Z,1509448389.744 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:13:09.744Z,1509448389.744 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T11:13:10.117Z,1509448390.117 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:13:10.118Z,1509448390.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:13:10.118Z,1509448390.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:13:30.141Z,1509448410.141 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T11:13:33.297Z,1509448413.297 [BPC1](ERROR): Failed to receive battery data
2017-10-31T11:13:33.297Z,1509448413.297 [BPC1] Communications Fault, FailCount= 1
2017-10-31T11:13:33.297Z,1509448413.297 [BPC1](ERROR): Communications Fault
2017-10-31T11:13:33.366Z,1509448413.366 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T11:13:34.541Z,1509448414.541 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:13:34.541Z,1509448414.541 [BPC1] No Fault, FailCount= 1
2017-10-31T11:14:00.157Z,1509448440.157 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:14:10.953Z,1509448450.953 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134604
CHAN A1 (24V): -0.003676
CHAN A2 (12V): -0.001936
CHAN A3 (5V): 0.000198
CHAN B0 (3.3V): 0.000111
CHAN B1 (3.15aV): -0.000304
CHAN B2 (3.15bV): 0.000298
CHAN B3 (GND): 0.000021
OPEN: -0.000512
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:14:51.729Z,1509448491.729 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T11:14:51.730Z,1509448491.730 [Default:CheckIn:C.Wait] Stopped
2017-10-31T11:14:51.730Z,1509448491.730 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T11:14:51.730Z,1509448491.730 [Default:CheckIn:D] Running Loop=1
2017-10-31T11:14:52.135Z,1509448492.135 [Default:CheckIn:D] Stopped
2017-10-31T11:14:52.135Z,1509448492.135 [Default:CheckIn:E] Running Loop=1
2017-10-31T11:14:52.532Z,1509448492.532 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 757.740365 min 
2017-10-31T11:14:52.532Z,1509448492.532 [Default:CheckIn:E] Stopped
2017-10-31T11:14:52.533Z,1509448492.533 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T11:14:52.533Z,1509448492.533 [Default:CheckIn] Stopped
2017-10-31T11:14:52.533Z,1509448492.533 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T11:14:52.533Z,1509448492.533 [Default:CheckIn](INFO): Running loop #70
2017-10-31T11:14:52.533Z,1509448492.533 [Default:CheckIn] Running Loop=70
2017-10-31T11:14:52.533Z,1509448492.533 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T11:14:52.533Z,1509448492.533 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T11:14:55.906Z,1509448495.906 [NAL9602](INFO): Powering up
2017-10-31T11:15:07.064Z,1509448507.064 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:15:31.862Z,1509448531.862 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T11:15:31.863Z,1509448531.863 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T11:15:41.167Z,1509448541.167 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:15:51.939Z,1509448551.939 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134033
CHAN A1 (24V): -0.004401
CHAN A2 (12V): 4.697929
CHAN A3 (5V): -0.000407
CHAN B0 (3.3V): -0.000311
CHAN B1 (3.15aV): -0.000654
CHAN B2 (3.15bV): -0.000102
CHAN B3 (GND): 0.000053
OPEN: -0.000559
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:16:10.232Z,1509448570.232 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:16:10.232Z,1509448570.232 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T11:16:10.232Z,1509448570.232 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:16:10.270Z,1509448570.270 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:16:10.628Z,1509448570.628 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:16:10.628Z,1509448570.628 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T11:16:11.012Z,1509448571.012 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:16:11.013Z,1509448571.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:16:11.013Z,1509448571.013 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:17:22.222Z,1509448642.222 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:17:28.162Z,1509448648.162 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T11:17:28.162Z,1509448648.162 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T11:17:33.049Z,1509448653.049 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003626
CHAN A1 (24V): -0.003452
CHAN A2 (12V): -0.002027
CHAN A3 (5V): -0.000256
CHAN B0 (3.3V): -0.000563
CHAN B1 (3.15aV): -0.000243
CHAN B2 (3.15bV): -0.000363
CHAN B3 (GND): 0.000130
OPEN: -0.000548
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:17:52.176Z,1509448672.176 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T11:17:52.176Z,1509448672.176 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:17:52.176Z,1509448672.176 [BPC1](ERROR): Data Fault
2017-10-31T11:17:52.230Z,1509448672.230 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:17:53.431Z,1509448673.431 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:17:53.431Z,1509448673.431 [BPC1] No Fault, FailCount= 1
2017-10-31T11:18:21.683Z,1509448701.683 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T11:18:21.683Z,1509448701.683 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T11:18:59.521Z,1509448739.521 [PNI_TCM](ERROR): CRC does not match. Expected:0x54067 got:0x8209
2017-10-31T11:19:03.164Z,1509448743.164 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:19:10.328Z,1509448750.328 [PNI_TCM](ERROR): CRC does not match. Expected:0x16072 got:0x3846
2017-10-31T11:19:11.146Z,1509448751.146 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:19:11.147Z,1509448751.147 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T11:19:11.147Z,1509448751.147 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:19:11.160Z,1509448751.160 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:19:11.558Z,1509448751.558 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:19:11.558Z,1509448751.558 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T11:19:11.944Z,1509448751.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:19:11.944Z,1509448751.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:19:11.944Z,1509448751.944 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:19:13.970Z,1509448753.970 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133847
CHAN A1 (24V): 4.657929
CHAN A2 (12V): -0.002410
CHAN A3 (5V): 0.000565
CHAN B0 (3.3V): 0.000167
CHAN B1 (3.15aV): -0.000326
CHAN B2 (3.15bV): 0.000030
CHAN B3 (GND): 0.000303
OPEN: -0.000660
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:19:20.316Z,1509448760.316 [PNI_TCM](ERROR): CRC does not match. Expected:0x19215 got:0x29977
2017-10-31T11:19:21.914Z,1509448761.914 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T11:19:35.546Z,1509448775.546 [PNI_TCM](ERROR): CRC does not match. Expected:0x63588 got:0x17944
2017-10-31T11:19:41.933Z,1509448781.933 [PNI_TCM](ERROR): CRC does not match. Expected:0x39707 got:0x49074
2017-10-31T11:19:42.337Z,1509448782.337 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T11:19:42.338Z,1509448782.338 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:19:42.338Z,1509448782.338 [BPC1](ERROR): Data Fault
2017-10-31T11:19:42.361Z,1509448782.361 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:19:43.542Z,1509448783.542 [PNI_TCM](ERROR): CRC does not match. Expected:0x44053 got:0x48156
2017-10-31T11:19:43.611Z,1509448783.611 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:19:43.611Z,1509448783.611 [BPC1] No Fault, FailCount= 1
2017-10-31T11:19:50.720Z,1509448790.720 [PNI_TCM](ERROR): CRC does not match. Expected:0x38428 got:0x43136
2017-10-31T11:19:52.749Z,1509448792.749 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T11:14:52.5Z
2017-10-31T11:19:52.749Z,1509448792.749 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T11:19:52.750Z,1509448792.750 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T11:19:57.452Z,1509448797.452 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0316.lzma
2017-10-31T11:19:58.196Z,1509448798.196 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0316.lzma.bak
2017-10-31T11:19:58.196Z,1509448798.196 [DataOverHttps](INFO): SBD MOMSN=5178790
2017-10-31T11:20:07.449Z,1509448807.449 [DataOverHttps](INFO): Sending 542 bytes from file Logs/20171030T210256/Express0317.lzma
2017-10-31T11:20:08.224Z,1509448808.224 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0317.lzma.bak
2017-10-31T11:20:08.224Z,1509448808.224 [DataOverHttps](INFO): SBD MOMSN=5178792
2017-10-31T11:20:08.695Z,1509448808.695 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T11:20:08.695Z,1509448808.695 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T11:20:08.695Z,1509448808.695 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T11:20:12.347Z,1509448812.347 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T11:20:42.836Z,1509448842.836 [NAL9602](INFO): Powering down
2017-10-31T11:20:44.110Z,1509448844.110 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:20:54.922Z,1509448854.922 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003118
CHAN A1 (24V): -0.003580
CHAN A2 (12V): -0.001594
CHAN A3 (5V): 0.000444
CHAN B0 (3.3V): -0.000048
CHAN B1 (3.15aV): 0.000071
CHAN B2 (3.15bV): -0.000232
CHAN B3 (GND): -0.000413
OPEN: -0.000348
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:22:12.727Z,1509448932.727 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:22:12.727Z,1509448932.727 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T11:22:12.728Z,1509448932.728 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:22:12.771Z,1509448932.771 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:22:12.892Z,1509448932.892 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:22:12.892Z,1509448932.892 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T11:22:13.240Z,1509448933.240 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:22:13.240Z,1509448933.240 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:22:13.241Z,1509448933.241 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:22:20.034Z,1509448940.034 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T11:22:20.034Z,1509448940.034 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:22:20.034Z,1509448940.034 [BPC1](ERROR): Data Fault
2017-10-31T11:22:20.074Z,1509448940.074 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:22:21.262Z,1509448941.262 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:22:21.262Z,1509448941.262 [BPC1] No Fault, FailCount= 1
2017-10-31T11:22:25.250Z,1509448945.250 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:22:36.061Z,1509448956.061 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135281
CHAN A1 (24V): -0.003164
CHAN A2 (12V): -0.002139
CHAN A3 (5V): 0.000020
CHAN B0 (3.3V): -0.000467
CHAN B1 (3.15aV): -0.000269
CHAN B2 (3.15bV): -0.000367
CHAN B3 (GND): -0.000266
OPEN: -0.000556
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:23:07.630Z,1509448987.630 [BPC1](ERROR): Failed to receive battery data
2017-10-31T11:23:07.631Z,1509448987.631 [BPC1] Communications Fault, FailCount= 1
2017-10-31T11:23:07.631Z,1509448987.631 [BPC1](ERROR): Communications Fault
2017-10-31T11:23:07.690Z,1509448987.690 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T11:23:08.863Z,1509448988.863 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:23:08.864Z,1509448988.864 [BPC1] No Fault, FailCount= 1
2017-10-31T11:23:27.566Z,1509449007.566 [BPC1](ERROR): Failed to parse message.
2017-10-31T11:23:27.566Z,1509449007.566 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T11:23:27.567Z,1509449007.567 [BPC1] Data Fault, FailCount= 2
2017-10-31T11:23:27.567Z,1509449007.567 [BPC1](ERROR): Data Fault
2017-10-31T11:23:27.590Z,1509449007.590 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:23:28.814Z,1509449008.814 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:23:28.814Z,1509449008.814 [BPC1] No Fault, FailCount= 2
2017-10-31T11:23:30.412Z,1509449010.412 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T11:23:51.552Z,1509449031.552 [PNI_TCM](ERROR): CRC does not match. Expected:0x13093 got:0x75
2017-10-31T11:24:01.164Z,1509449041.164 [PNI_TCM](ERROR): CRC does not match. Expected:0x43862 got:0x152
2017-10-31T11:24:06.391Z,1509449046.391 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:24:08.362Z,1509449048.362 [BPC1](ERROR): Failed to parse message.
2017-10-31T11:24:08.362Z,1509449048.362 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T11:24:08.362Z,1509449048.362 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:24:08.362Z,1509449048.362 [BPC1](ERROR): Data Fault
2017-10-31T11:24:08.414Z,1509449048.414 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:24:09.588Z,1509449049.588 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:24:09.588Z,1509449049.588 [BPC1] No Fault, FailCount= 1
2017-10-31T11:24:20.434Z,1509449060.434 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003636
CHAN A1 (24V): -0.003167
CHAN A2 (12V): -0.002497
CHAN A3 (5V): -0.000132
CHAN B0 (3.3V): 0.000038
CHAN B1 (3.15aV): -0.000252
CHAN B2 (3.15bV): -0.000320
CHAN B3 (GND): -0.000630
OPEN: -0.000535
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:25:09.234Z,1509449109.234 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T11:25:09.234Z,1509449109.234 [Default:CheckIn:C.Wait] Stopped
2017-10-31T11:25:09.234Z,1509449109.234 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T11:25:09.235Z,1509449109.235 [Default:CheckIn:D] Running Loop=1
2017-10-31T11:25:09.634Z,1509449109.634 [Default:CheckIn:D] Stopped
2017-10-31T11:25:09.634Z,1509449109.634 [Default:CheckIn:E] Running Loop=1
2017-10-31T11:25:10.031Z,1509449110.031 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 768.032031 min 
2017-10-31T11:25:10.031Z,1509449110.031 [Default:CheckIn:E] Stopped
2017-10-31T11:25:10.031Z,1509449110.031 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T11:25:10.032Z,1509449110.032 [Default:CheckIn] Stopped
2017-10-31T11:25:10.032Z,1509449110.032 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T11:25:10.032Z,1509449110.032 [Default:CheckIn](INFO): Running loop #71
2017-10-31T11:25:10.032Z,1509449110.032 [Default:CheckIn] Running Loop=71
2017-10-31T11:25:10.032Z,1509449110.032 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T11:25:10.032Z,1509449110.032 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T11:25:13.344Z,1509449113.344 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:25:13.345Z,1509449113.345 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T11:25:13.345Z,1509449113.345 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:25:13.374Z,1509449113.374 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:25:13.424Z,1509449113.424 [NAL9602](INFO): Powering up
2017-10-31T11:25:13.516Z,1509449113.516 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:25:13.516Z,1509449113.516 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T11:25:13.873Z,1509449113.873 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:25:13.874Z,1509449113.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:25:13.874Z,1509449113.874 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:25:24.590Z,1509449124.590 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:25:25.396Z,1509449125.396 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T11:25:25.396Z,1509449125.396 [NAL9602] Data Fault, FailCount= 1
2017-10-31T11:25:25.396Z,1509449125.396 [NAL9602](ERROR): Data Fault
2017-10-31T11:25:25.484Z,1509449125.484 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T11:25:25.792Z,1509449125.792 [NAL9602](INFO): Powering down
2017-10-31T11:25:26.673Z,1509449126.673 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T11:25:26.673Z,1509449126.673 [NAL9602] No Fault, FailCount= 1
2017-10-31T11:25:50.665Z,1509449150.665 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:25:55.016Z,1509449155.016 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T11:25:55.016Z,1509449155.016 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:25:55.016Z,1509449155.016 [BPC1](ERROR): Data Fault
2017-10-31T11:25:55.090Z,1509449155.090 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:25:56.188Z,1509449156.188 [NAL9602](INFO): Powering up NAL9602
2017-10-31T11:25:56.272Z,1509449156.272 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:25:56.272Z,1509449156.272 [BPC1] No Fault, FailCount= 1
2017-10-31T11:26:01.457Z,1509449161.457 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003642
CHAN A1 (24V): -0.003448
CHAN A2 (12V): -0.002079
CHAN A3 (5V): 0.000356
CHAN B0 (3.3V): -0.000243
CHAN B1 (3.15aV): -0.000357
CHAN B2 (3.15bV): -0.000234
CHAN B3 (GND): 0.000124
OPEN: -0.000173
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:26:06.993Z,1509449166.993 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:27:31.582Z,1509449251.582 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:27:39.032Z,1509449259.032 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T11:27:39.032Z,1509449259.032 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T11:27:42.289Z,1509449262.289 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134483
CHAN A1 (24V): -0.003956
CHAN A2 (12V): -0.002554
CHAN A3 (5V): 0.000374
CHAN B0 (3.3V): -0.000502
CHAN B1 (3.15aV): 4.767929
CHAN B2 (3.15bV): -0.000510
CHAN B3 (GND): -0.000132
OPEN: -0.000494
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:27:47.054Z,1509449267.054 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T11:27:47.054Z,1509449267.054 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:27:47.054Z,1509449267.054 [BPC1](ERROR): Data Fault
2017-10-31T11:27:47.111Z,1509449267.111 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:27:48.356Z,1509449268.356 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:27:48.356Z,1509449268.356 [BPC1] No Fault, FailCount= 1
2017-10-31T11:28:13.974Z,1509449293.974 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:28:13.974Z,1509449293.974 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T11:28:13.974Z,1509449293.974 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:28:13.000Z,1509449294.000 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:28:14.134Z,1509449294.134 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:28:14.134Z,1509449294.134 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T11:28:14.463Z,1509449294.463 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:28:14.463Z,1509449294.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:28:14.463Z,1509449294.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:28:22.421Z,1509449302.421 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T11:28:22.421Z,1509449302.421 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T11:28:44.029Z,1509449324.029 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T11:28:44.029Z,1509449324.029 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T11:29:14.130Z,1509449354.130 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:29:24.680Z,1509449364.680 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002957
CHAN A1 (24V): -0.004625
CHAN A2 (12V): -0.002689
CHAN A3 (5V): 0.000530
CHAN B0 (3.3V): -0.000357
CHAN B1 (3.15aV): -0.000066
CHAN B2 (3.15bV): -0.000488
CHAN B3 (GND): 0.000182
OPEN: -0.000553
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:30:10.225Z,1509449410.225 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T11:25:10.0Z
2017-10-31T11:30:10.225Z,1509449410.225 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T11:30:10.226Z,1509449410.226 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T11:30:14.548Z,1509449414.548 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0320.lzma
2017-10-31T11:30:15.300Z,1509449415.300 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0320.lzma.bak
2017-10-31T11:30:15.300Z,1509449415.300 [DataOverHttps](INFO): SBD MOMSN=5178807
2017-10-31T11:30:19.355Z,1509449419.355 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T11:30:19.355Z,1509449419.355 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T11:30:25.075Z,1509449425.075 [DataOverHttps](INFO): Sending 631 bytes from file Logs/20171030T210256/Express0321.lzma
2017-10-31T11:30:25.880Z,1509449425.880 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0321.lzma.bak
2017-10-31T11:30:25.880Z,1509449425.880 [DataOverHttps](INFO): SBD MOMSN=5178809
2017-10-31T11:30:26.448Z,1509449426.448 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T11:30:26.448Z,1509449426.448 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T11:30:26.448Z,1509449426.448 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T11:30:41.158Z,1509449441.158 [PNI_TCM](ERROR): CRC does not match. Expected:0x17827 got:0x6591
2017-10-31T11:30:54.825Z,1509449454.825 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:31:01.957Z,1509449461.957 [PNI_TCM](ERROR): CRC does not match. Expected:0x45297 got:0x40333
2017-10-31T11:31:05.603Z,1509449465.603 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134256
CHAN A1 (24V): -0.003853
CHAN A2 (12V): -0.002007
CHAN A3 (5V): 0.000241
CHAN B0 (3.3V): -0.000307
CHAN B1 (3.15aV): 0.000423
CHAN B2 (3.15bV): -0.000557
CHAN B3 (GND): 0.000212
OPEN: -0.000609
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:31:09.924Z,1509449469.924 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T11:31:09.963Z,1509449469.963 [PNI_TCM](ERROR): CRC does not match. Expected:0x48960 got:0x29918
2017-10-31T11:31:14.803Z,1509449474.803 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:31:14.804Z,1509449474.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T11:31:14.804Z,1509449474.804 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:31:14.843Z,1509449474.843 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:31:15.249Z,1509449475.249 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:31:15.249Z,1509449475.249 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T11:31:15.560Z,1509449475.560 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:31:15.560Z,1509449475.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:31:15.561Z,1509449475.561 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:31:25.958Z,1509449485.958 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T11:31:40.492Z,1509449500.492 [NAL9602](INFO): Powering down
2017-10-31T11:32:35.877Z,1509449555.877 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:32:46.710Z,1509449566.710 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 4.661299
CHAN A1 (24V): -0.004000
CHAN A2 (12V): -0.002495
CHAN A3 (5V): 0.000133
CHAN B0 (3.3V): -0.000096
CHAN B1 (3.15aV): -0.000028
CHAN B2 (3.15bV): 0.000411
CHAN B3 (GND): -0.000375
OPEN: -0.000215
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:33:30.461Z,1509449610.461 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T11:34:15.736Z,1509449655.736 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:34:15.741Z,1509449655.741 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T11:34:15.741Z,1509449655.741 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:34:15.766Z,1509449655.766 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:34:16.165Z,1509449656.165 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:34:16.165Z,1509449656.165 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T11:34:16.536Z,1509449656.536 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:34:16.536Z,1509449656.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:34:16.536Z,1509449656.536 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:34:16.952Z,1509449656.952 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:34:30.791Z,1509449670.791 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003681
CHAN A1 (24V): -0.003524
CHAN A2 (12V): -0.002669
CHAN A3 (5V): 0.000079
CHAN B0 (3.3V): 0.000231
CHAN B1 (3.15aV): 0.000346
CHAN B2 (3.15bV): -0.000361
CHAN B3 (GND): -0.000024
OPEN: -0.000268
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:35:26.871Z,1509449726.871 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T11:35:26.872Z,1509449726.872 [Default:CheckIn:C.Wait] Stopped
2017-10-31T11:35:26.872Z,1509449726.872 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T11:35:26.872Z,1509449726.872 [Default:CheckIn:D] Running Loop=1
2017-10-31T11:35:27.264Z,1509449727.264 [Default:CheckIn:D] Stopped
2017-10-31T11:35:27.264Z,1509449727.264 [Default:CheckIn:E] Running Loop=1
2017-10-31T11:35:27.701Z,1509449727.701 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 778.325846 min 
2017-10-31T11:35:27.702Z,1509449727.702 [Default:CheckIn:E] Stopped
2017-10-31T11:35:27.702Z,1509449727.702 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T11:35:27.702Z,1509449727.702 [Default:CheckIn] Stopped
2017-10-31T11:35:27.702Z,1509449727.702 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T11:35:27.702Z,1509449727.702 [Default:CheckIn](INFO): Running loop #72
2017-10-31T11:35:27.706Z,1509449727.706 [Default:CheckIn] Running Loop=72
2017-10-31T11:35:27.706Z,1509449727.706 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T11:35:27.707Z,1509449727.707 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T11:35:31.010Z,1509449731.010 [NAL9602](INFO): Powering up
2017-10-31T11:35:42.155Z,1509449742.155 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:36:01.037Z,1509449761.037 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:36:11.829Z,1509449771.829 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003385
CHAN A1 (24V): -0.003892
CHAN A2 (12V): -0.002886
CHAN A3 (5V): 0.000457
CHAN B0 (3.3V): -0.000046
CHAN B1 (3.15aV): -0.000496
CHAN B2 (3.15bV): -0.000255
CHAN B3 (GND): -0.000718
OPEN: -0.000629
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:36:14.157Z,1509449774.157 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T11:36:14.232Z,1509449774.232 [NAL9602](FAULT): received: 
+CSQ:0

OK24, 2, 0, 0, 0

OK
2017-10-31T11:36:14.232Z,1509449774.232 [NAL9602] Data Fault, FailCount= 2
2017-10-31T11:36:14.232Z,1509449774.232 [NAL9602](ERROR): Data Fault
2017-10-31T11:36:14.359Z,1509449774.359 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T11:36:14.554Z,1509449774.554 [NAL9602](INFO): Powering down
2017-10-31T11:36:15.467Z,1509449775.467 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T11:36:15.467Z,1509449775.467 [NAL9602] No Fault, FailCount= 2
2017-10-31T11:36:44.712Z,1509449804.712 [NAL9602](INFO): Powering up NAL9602
2017-10-31T11:36:55.515Z,1509449815.515 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:36:56.312Z,1509449816.312 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T11:36:56.312Z,1509449816.312 [NAL9602] Data Fault, FailCount= 3
2017-10-31T11:36:56.312Z,1509449816.312 [NAL9602](ERROR): Data Fault
2017-10-31T11:36:56.398Z,1509449816.398 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T11:36:56.700Z,1509449816.700 [NAL9602](INFO): Powering down
2017-10-31T11:36:57.577Z,1509449817.577 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T11:36:57.577Z,1509449817.577 [NAL9602] No Fault, FailCount= 3
2017-10-31T11:37:16.751Z,1509449836.751 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:37:16.751Z,1509449836.751 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T11:37:16.751Z,1509449836.751 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:37:16.766Z,1509449836.766 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:37:17.171Z,1509449837.171 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:37:17.171Z,1509449837.171 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T11:37:17.556Z,1509449837.556 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:37:17.556Z,1509449837.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:37:17.556Z,1509449837.556 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:37:27.098Z,1509449847.098 [NAL9602](INFO): Powering up NAL9602
2017-10-31T11:37:38.166Z,1509449858.166 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:37:41.839Z,1509449861.839 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:37:42.618Z,1509449862.618 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T11:37:42.618Z,1509449862.618 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:37:42.618Z,1509449862.618 [BPC1](ERROR): Data Fault
2017-10-31T11:37:42.666Z,1509449862.666 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:37:43.840Z,1509449863.840 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:37:43.840Z,1509449863.840 [BPC1] No Fault, FailCount= 1
2017-10-31T11:37:52.678Z,1509449872.678 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133857
CHAN A1 (24V): -0.004097
CHAN A2 (12V): -0.002344
CHAN A3 (5V): 0.000274
CHAN B0 (3.3V): -0.000248
CHAN B1 (3.15aV): -0.000752
CHAN B2 (3.15bV): -0.001026
CHAN B3 (GND): -0.000684
OPEN: -0.000386
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:39:22.983Z,1509449962.983 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:39:33.979Z,1509449973.979 [PNI_TCM](ERROR): CRC does not match. Expected:0x61167 got:0x16938
2017-10-31T11:39:36.010Z,1509449976.010 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134256
CHAN A1 (24V): -0.003761
CHAN A2 (12V): -0.001835
CHAN A3 (5V): 0.000765
CHAN B0 (3.3V): 0.000026
CHAN B1 (3.15aV): -0.000716
CHAN B2 (3.15bV): -0.000114
CHAN B3 (GND): 0.000379
OPEN: -0.000374
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:39:38.777Z,1509449978.777 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T11:39:43.576Z,1509449983.576 [PNI_TCM](ERROR): CRC does not match. Expected:0x23508 got:0x49073
2017-10-31T11:39:48.752Z,1509449988.752 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T11:39:49.173Z,1509449989.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16542
2017-10-31T11:40:01.179Z,1509450001.179 [PNI_TCM](ERROR): CRC does not match. Expected:0x32431 got:0x45370
2017-10-31T11:40:17.593Z,1509450017.593 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:40:17.594Z,1509450017.594 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T11:40:17.594Z,1509450017.594 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:40:17.628Z,1509450017.628 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:40:18.010Z,1509450018.010 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:40:18.010Z,1509450018.010 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T11:40:18.401Z,1509450018.401 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:40:18.402Z,1509450018.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:40:18.402Z,1509450018.402 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:40:25.178Z,1509450025.178 [PNI_TCM](ERROR): CRC does not match. Expected:0x48350 got:0x34364
2017-10-31T11:40:28.023Z,1509450028.023 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T11:35:27.7Z
2017-10-31T11:40:28.023Z,1509450028.023 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T11:40:28.024Z,1509450028.024 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T11:40:32.216Z,1509450032.216 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0324.lzma
2017-10-31T11:40:32.956Z,1509450032.956 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0324.lzma.bak
2017-10-31T11:40:32.956Z,1509450032.956 [DataOverHttps](INFO): SBD MOMSN=5178826
2017-10-31T11:40:42.356Z,1509450042.356 [DataOverHttps](INFO): Sending 693 bytes from file Logs/20171030T210256/Express0325.lzma
2017-10-31T11:40:43.112Z,1509450043.112 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0325.lzma.bak
2017-10-31T11:40:43.113Z,1509450043.113 [DataOverHttps](INFO): SBD MOMSN=5178828
2017-10-31T11:40:43.181Z,1509450043.181 [PNI_TCM](ERROR): CRC does not match. Expected:0x15818 got:0x36379
2017-10-31T11:40:43.586Z,1509450043.586 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T11:40:43.586Z,1509450043.586 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T11:40:43.587Z,1509450043.587 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T11:40:47.264Z,1509450047.264 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T11:41:06.265Z,1509450066.265 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:41:17.078Z,1509450077.078 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002752
CHAN A1 (24V): -0.004432
CHAN A2 (12V): -0.001751
CHAN A3 (5V): 0.000251
CHAN B0 (3.3V): -0.000036
CHAN B1 (3.15aV): -0.000231
CHAN B2 (3.15bV): -0.000885
CHAN B3 (GND): 0.000417
OPEN: -0.000400
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:41:17.793Z,1509450077.793 [NAL9602](INFO): Powering down
2017-10-31T11:42:41.796Z,1509450161.796 [BPC1](ERROR): Failed to receive battery data
2017-10-31T11:42:41.796Z,1509450161.796 [BPC1] Communications Fault, FailCount= 1
2017-10-31T11:42:41.796Z,1509450161.796 [BPC1](ERROR): Communications Fault
2017-10-31T11:42:41.844Z,1509450161.844 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T11:42:43.033Z,1509450163.033 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:42:43.033Z,1509450163.033 [BPC1] No Fault, FailCount= 1
2017-10-31T11:42:47.905Z,1509450167.905 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:42:58.415Z,1509450178.415 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134700
CHAN A1 (24V): -0.004017
CHAN A2 (12V): -0.001745
CHAN A3 (5V): 0.000406
CHAN B0 (3.3V): 0.000079
CHAN B1 (3.15aV): 0.000108
CHAN B2 (3.15bV): -0.000279
CHAN B3 (GND): -0.000015
OPEN: -0.000479
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:43:18.781Z,1509450198.781 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:43:18.781Z,1509450198.781 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T11:43:18.781Z,1509450198.781 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:43:18.795Z,1509450198.795 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:43:19.195Z,1509450199.195 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:43:19.196Z,1509450199.196 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T11:43:19.580Z,1509450199.580 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:43:19.580Z,1509450199.580 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:43:19.581Z,1509450199.581 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:43:30.811Z,1509450210.811 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T11:44:28.538Z,1509450268.538 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:44:39.327Z,1509450279.327 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134854
CHAN A1 (24V): -0.003124
CHAN A2 (12V): -0.002230
CHAN A3 (5V): 0.000288
CHAN B0 (3.3V): 0.000138
CHAN B1 (3.15aV): -0.000116
CHAN B2 (3.15bV): 0.000320
CHAN B3 (GND): -0.000183
OPEN: -0.000598
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:44:48.759Z,1509450288.759 [BPC1](ERROR): Failed to parse message.
2017-10-31T11:44:48.759Z,1509450288.759 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T11:44:48.760Z,1509450288.760 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:44:48.760Z,1509450288.760 [BPC1](ERROR): Data Fault
2017-10-31T11:44:48.794Z,1509450288.794 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:44:49.973Z,1509450289.973 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:44:49.973Z,1509450289.973 [BPC1] No Fault, FailCount= 1
2017-10-31T11:45:09.541Z,1509450309.541 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T11:45:09.541Z,1509450309.541 [BPC1] Data Fault, FailCount= 2
2017-10-31T11:45:09.541Z,1509450309.541 [BPC1](ERROR): Data Fault
2017-10-31T11:45:09.598Z,1509450309.598 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:45:10.775Z,1509450310.775 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:45:10.775Z,1509450310.775 [BPC1] No Fault, FailCount= 2
2017-10-31T11:45:44.377Z,1509450344.377 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T11:45:44.378Z,1509450344.378 [Default:CheckIn:C.Wait] Stopped
2017-10-31T11:45:44.378Z,1509450344.378 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T11:45:44.378Z,1509450344.378 [Default:CheckIn:D] Running Loop=1
2017-10-31T11:45:44.767Z,1509450344.767 [Default:CheckIn:D] Stopped
2017-10-31T11:45:44.767Z,1509450344.767 [Default:CheckIn:E] Running Loop=1
2017-10-31T11:45:45.163Z,1509450345.163 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 788.617578 min 
2017-10-31T11:45:45.163Z,1509450345.163 [Default:CheckIn:E] Stopped
2017-10-31T11:45:45.164Z,1509450345.164 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T11:45:45.164Z,1509450345.164 [Default:CheckIn] Stopped
2017-10-31T11:45:45.164Z,1509450345.164 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T11:45:45.164Z,1509450345.164 [Default:CheckIn](INFO): Running loop #73
2017-10-31T11:45:45.164Z,1509450345.164 [Default:CheckIn] Running Loop=73
2017-10-31T11:45:45.164Z,1509450345.164 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T11:45:45.164Z,1509450345.164 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T11:45:48.665Z,1509450348.665 [NAL9602](INFO): Powering up
2017-10-31T11:45:59.815Z,1509450359.815 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:46:09.495Z,1509450369.495 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:46:19.865Z,1509450379.865 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:46:19.865Z,1509450379.865 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T11:46:19.865Z,1509450379.865 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:46:19.891Z,1509450379.891 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:46:20.310Z,1509450380.310 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:46:20.311Z,1509450380.311 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T11:46:20.319Z,1509450380.319 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133791
CHAN A1 (24V): -0.004160
CHAN A2 (12V): -0.001915
CHAN A3 (5V): 0.000195
CHAN B0 (3.3V): -0.000036
CHAN B1 (3.15aV): 0.000042
CHAN B2 (3.15bV): -0.000685
CHAN B3 (GND): 0.000059
OPEN: -0.000435
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:46:20.706Z,1509450380.706 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:46:20.707Z,1509450380.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:46:20.707Z,1509450380.707 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:46:31.822Z,1509450391.822 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T11:46:31.901Z,1509450391.901 [NAL9602](FAULT): received: 
+CSQ:0

OK24, 2, 0, 0, 0

OK
2017-10-31T11:46:31.901Z,1509450391.901 [NAL9602] Data Fault, FailCount= 4
2017-10-31T11:46:31.901Z,1509450391.901 [NAL9602](ERROR): Data Fault
2017-10-31T11:46:31.999Z,1509450391.999 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T11:46:32.218Z,1509450392.218 [NAL9602](INFO): Powering down
2017-10-31T11:46:33.095Z,1509450393.095 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T11:46:33.095Z,1509450393.095 [NAL9602] No Fault, FailCount= 4
2017-10-31T11:46:49.590Z,1509450409.590 [PNI_TCM](ERROR): CRC does not match. Expected:0x17964 got:0x16807
2017-10-31T11:46:52.787Z,1509450412.787 [PNI_TCM](ERROR): CRC does not match. Expected:0x63369 got:0x37148
2017-10-31T11:46:53.992Z,1509450413.992 [PNI_TCM](ERROR): CRC does not match. Expected:0x48756 got:0x55004
2017-10-31T11:46:57.186Z,1509450417.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x31899 got:0x40370
2017-10-31T11:47:02.356Z,1509450422.356 [NAL9602](INFO): Powering up NAL9602
2017-10-31T11:47:06.793Z,1509450426.793 [PNI_TCM](ERROR): CRC does not match. Expected:0x44262 got:0x1048
2017-10-31T11:47:08.393Z,1509450428.393 [PNI_TCM](ERROR): CRC does not match. Expected:0x44416 got:0x21992
2017-10-31T11:47:13.556Z,1509450433.556 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:47:22.786Z,1509450442.786 [PNI_TCM](ERROR): CRC does not match. Expected:0x33762 got:0x49330
2017-10-31T11:47:24.388Z,1509450444.388 [PNI_TCM](ERROR): CRC does not match. Expected:0x18705 got:0x21984
2017-10-31T11:47:27.597Z,1509450447.597 [PNI_TCM](ERROR): CRC does not match. Expected:0x53158 got:0x6335
2017-10-31T11:47:30.797Z,1509450450.797 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T11:47:35.599Z,1509450455.599 [PNI_TCM](ERROR): CRC does not match. Expected:0x41242 got:0x16981
2017-10-31T11:47:37.194Z,1509450457.194 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T11:47:40.406Z,1509450460.406 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T11:47:50.627Z,1509450470.627 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:48:01.443Z,1509450481.443 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002585
CHAN A1 (24V): -0.004903
CHAN A2 (12V): -0.002189
CHAN A3 (5V): -0.000006
CHAN B0 (3.3V): -0.000157
CHAN B1 (3.15aV): -0.000132
CHAN B2 (3.15bV): -0.000202
CHAN B3 (GND): -0.000280
OPEN: -0.000947
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:48:50.792Z,1509450530.792 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T11:48:52.396Z,1509450532.396 [PNI_TCM](ERROR): CRC does not match. Expected:0x12681 got:0x21983
2017-10-31T11:48:53.999Z,1509450533.999 [PNI_TCM](ERROR): CRC does not match. Expected:0x36854 got:0x49152
2017-10-31T11:48:57.186Z,1509450537.186 [PNI_TCM](ERROR): CRC does not match. Expected:0x17827 got:0x51454
2017-10-31T11:48:57.597Z,1509450537.597 [PNI_TCM](ERROR): CRC does not match. Expected:0x13442 got:0x7490
2017-10-31T11:49:00.401Z,1509450540.401 [PNI_TCM](ERROR): CRC does not match. Expected:0x8536 got:0x10993
2017-10-31T11:49:01.997Z,1509450541.997 [PNI_TCM](ERROR): CRC does not match. Expected:0x38559 got:0x32768
2017-10-31T11:49:12.005Z,1509450552.005 [PNI_TCM](ERROR): CRC does not match. Expected:0x58546 got:0x25863
2017-10-31T11:49:16.785Z,1509450556.785 [PNI_TCM](ERROR): CRC does not match. Expected:0x18617 got:0x45454
2017-10-31T11:49:18.003Z,1509450558.003 [PNI_TCM](ERROR): CRC does not match. Expected:0x20388 got:0x21987
2017-10-31T11:49:19.603Z,1509450559.603 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T11:49:20.828Z,1509450560.828 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:49:20.829Z,1509450560.829 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T11:49:20.829Z,1509450560.829 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:49:20.863Z,1509450560.863 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:49:21.192Z,1509450561.192 [PNI_TCM](ERROR): CRC does not match. Expected:0x28299 got:0x217
2017-10-31T11:49:21.255Z,1509450561.255 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:49:21.255Z,1509450561.255 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T11:49:21.610Z,1509450561.610 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:49:21.611Z,1509450561.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:49:21.611Z,1509450561.611 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:49:24.394Z,1509450564.394 [PNI_TCM](ERROR): CRC does not match. Expected:0x52577 got:0x6591
2017-10-31T11:49:25.996Z,1509450565.996 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T11:49:30.798Z,1509450570.798 [PNI_TCM](ERROR): CRC does not match. Expected:0x5079 got:0x62749
2017-10-31T11:49:31.642Z,1509450571.642 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:49:37.200Z,1509450577.200 [PNI_TCM](ERROR): CRC does not match. Expected:0x14651 got:0x12824
2017-10-31T11:49:40.399Z,1509450580.399 [PNI_TCM](ERROR): CRC does not match. Expected:0x26438 got:0x1857
2017-10-31T11:49:42.476Z,1509450582.476 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133947
CHAN A1 (24V): -0.004504
CHAN A2 (12V): -0.002173
CHAN A3 (5V): -0.000156
CHAN B0 (3.3V): -0.000022
CHAN B1 (3.15aV): -0.000014
CHAN B2 (3.15bV): -0.000223
CHAN B3 (GND): 0.000074
OPEN: -0.000565
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:49:45.197Z,1509450585.197 [PNI_TCM](ERROR): CRC does not match. Expected:0x61808 got:0x56
2017-10-31T11:50:45.393Z,1509450645.393 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T11:45:45.2Z
2017-10-31T11:50:45.393Z,1509450645.393 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T11:50:45.394Z,1509450645.394 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T11:50:49.621Z,1509450649.621 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0328.lzma
2017-10-31T11:50:50.368Z,1509450650.368 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0328.lzma.bak
2017-10-31T11:50:50.369Z,1509450650.369 [DataOverHttps](INFO): SBD MOMSN=5178846
2017-10-31T11:50:59.718Z,1509450659.718 [DataOverHttps](INFO): Sending 672 bytes from file Logs/20171030T210256/Express0329.lzma
2017-10-31T11:51:00.452Z,1509450660.452 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0329.lzma.bak
2017-10-31T11:51:00.452Z,1509450660.452 [DataOverHttps](INFO): SBD MOMSN=5178848
2017-10-31T11:51:00.914Z,1509450660.914 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T11:51:00.914Z,1509450660.914 [BPC1] Data Fault, FailCount= 1
2017-10-31T11:51:00.914Z,1509450660.914 [BPC1](ERROR): Data Fault
2017-10-31T11:51:00.948Z,1509450660.948 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T11:51:00.948Z,1509450660.948 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T11:51:00.948Z,1509450660.948 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T11:51:00.971Z,1509450660.971 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T11:51:04.516Z,1509450664.516 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T11:51:04.721Z,1509450664.721 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:51:04.721Z,1509450664.721 [BPC1] No Fault, FailCount= 1
2017-10-31T11:51:12.681Z,1509450672.681 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:51:23.477Z,1509450683.477 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002639
CHAN A1 (24V): -0.004638
CHAN A2 (12V): -0.002335
CHAN A3 (5V): 0.000297
CHAN B0 (3.3V): -0.000336
CHAN B1 (3.15aV): -0.000354
CHAN B2 (3.15bV): 0.000316
CHAN B3 (GND): 0.000358
OPEN: -0.000320
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:51:34.997Z,1509450694.997 [NAL9602](INFO): Powering down
2017-10-31T11:52:21.719Z,1509450741.719 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:52:21.719Z,1509450741.719 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T11:52:21.719Z,1509450741.719 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:52:21.741Z,1509450741.741 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:52:22.124Z,1509450742.124 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:52:22.124Z,1509450742.124 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T11:52:22.518Z,1509450742.518 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:52:22.519Z,1509450742.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:52:22.519Z,1509450742.519 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:52:36.110Z,1509450756.110 [BPC1](ERROR): Failed to receive battery data
2017-10-31T11:52:36.110Z,1509450756.110 [BPC1] Communications Fault, FailCount= 1
2017-10-31T11:52:36.111Z,1509450756.111 [BPC1](ERROR): Communications Fault
2017-10-31T11:52:36.159Z,1509450756.159 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T11:52:37.332Z,1509450757.332 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T11:52:37.332Z,1509450757.332 [BPC1] No Fault, FailCount= 1
2017-10-31T11:52:53.749Z,1509450773.749 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:53:06.765Z,1509450786.765 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003114
CHAN A1 (24V): -0.003374
CHAN A2 (12V): -0.002098
CHAN A3 (5V): 0.000235
CHAN B0 (3.3V): 0.000220
CHAN B1 (3.15aV): -0.000588
CHAN B2 (3.15bV): -0.000293
CHAN B3 (GND): 0.000473
OPEN: -0.000326
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:53:31.150Z,1509450811.150 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T11:54:36.936Z,1509450876.936 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:54:47.741Z,1509450887.741 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002870
CHAN A1 (24V): -0.003786
CHAN A2 (12V): -0.002236
CHAN A3 (5V): 0.000100
CHAN B0 (3.3V): -0.000012
CHAN B1 (3.15aV): -0.000042
CHAN B2 (3.15bV): 0.000001
CHAN B3 (GND): -0.000275
OPEN: -0.000448
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:55:22.854Z,1509450922.854 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:55:22.855Z,1509450922.855 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T11:55:22.855Z,1509450922.855 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:55:22.868Z,1509450922.868 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:55:23.271Z,1509450923.271 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:55:23.271Z,1509450923.271 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T11:55:23.657Z,1509450923.657 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:55:23.662Z,1509450923.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:55:23.662Z,1509450923.662 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:56:01.654Z,1509450961.654 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T11:56:01.655Z,1509450961.655 [Default:CheckIn:C.Wait] Stopped
2017-10-31T11:56:01.655Z,1509450961.655 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T11:56:01.655Z,1509450961.655 [Default:CheckIn:D] Running Loop=1
2017-10-31T11:56:02.051Z,1509450962.051 [Default:CheckIn:D] Stopped
2017-10-31T11:56:02.052Z,1509450962.052 [Default:CheckIn:E] Running Loop=1
2017-10-31T11:56:02.459Z,1509450962.459 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 798.905599 min 
2017-10-31T11:56:02.459Z,1509450962.459 [Default:CheckIn:E] Stopped
2017-10-31T11:56:02.459Z,1509450962.459 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T11:56:02.459Z,1509450962.459 [Default:CheckIn] Stopped
2017-10-31T11:56:02.460Z,1509450962.460 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T11:56:02.460Z,1509450962.460 [Default:CheckIn](INFO): Running loop #74
2017-10-31T11:56:02.460Z,1509450962.460 [Default:CheckIn] Running Loop=74
2017-10-31T11:56:02.460Z,1509450962.460 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T11:56:02.460Z,1509450962.460 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T11:56:06.007Z,1509450966.007 [NAL9602](INFO): Powering up
2017-10-31T11:56:08.013Z,1509450968.013 [PNI_TCM](ERROR): CRC does not match. Expected:0x21134 got:0x17992
2017-10-31T11:56:12.419Z,1509450972.419 [PNI_TCM](ERROR): CRC does not match. Expected:0x16560 got:0x40542
2017-10-31T11:56:16.025Z,1509450976.025 [PNI_TCM](ERROR): CRC does not match. Expected:0x55669 got:0x54124
2017-10-31T11:56:17.183Z,1509450977.183 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:56:17.988Z,1509450977.988 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T11:56:17.988Z,1509450977.988 [NAL9602] Data Fault, FailCount= 5
2017-10-31T11:56:17.988Z,1509450977.988 [NAL9602](ERROR): Data Fault
2017-10-31T11:56:18.059Z,1509450978.059 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T11:56:18.063Z,1509450978.063 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T11:56:18.064Z,1509450978.064 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:56:18.377Z,1509450978.377 [NAL9602](INFO): Powering down
2017-10-31T11:56:18.459Z,1509450978.459 [CBIT](INFO): Critical error at 20171031T115618
2017-10-31T11:56:23.602Z,1509450983.602 [PNI_TCM](ERROR): CRC does not match. Expected:0x53948 got:0x27
2017-10-31T11:56:24.004Z,1509450984.004 [PNI_TCM](ERROR): CRC does not match. Expected:0x8268 got:0x63215
2017-10-31T11:56:28.410Z,1509450988.410 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T11:56:28.853Z,1509450988.853 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135087
CHAN A1 (24V): -0.003265
CHAN A2 (12V): -0.001954
CHAN A3 (5V): -0.000014
CHAN B0 (3.3V): -0.000293
CHAN B1 (3.15aV): 0.000270
CHAN B2 (3.15bV): -0.000131
CHAN B3 (GND): 0.000002
OPEN: -0.000374
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:56:30.007Z,1509450990.007 [PNI_TCM](ERROR): CRC does not match. Expected:0x61459 got:0x40450
2017-10-31T11:56:33.207Z,1509450993.207 [PNI_TCM](ERROR): CRC does not match. Expected:0x5520 got:0x49330
2017-10-31T11:56:34.810Z,1509450994.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x64317 got:0x59527
2017-10-31T11:56:36.411Z,1509450996.411 [PNI_TCM](ERROR): CRC does not match. Expected:0x60399 got:0x16938
2017-10-31T11:56:38.011Z,1509450998.011 [PNI_TCM](ERROR): CRC does not match. Expected:0x23537 got:0x49074
2017-10-31T11:56:39.613Z,1509450999.613 [PNI_TCM](ERROR): CRC does not match. Expected:0x61149 got:0x7490
2017-10-31T11:56:41.211Z,1509451001.211 [PNI_TCM](ERROR): CRC does not match. Expected:0x4195 got:0x21960
2017-10-31T11:56:42.815Z,1509451002.815 [PNI_TCM](ERROR): CRC does not match. Expected:0x53323 got:0x10974
2017-10-31T11:56:47.619Z,1509451007.619 [PNI_TCM](ERROR): CRC does not match. Expected:0x14875 got:0x1857
2017-10-31T11:56:57.609Z,1509451017.609 [PNI_TCM](ERROR): CRC does not match. Expected:0x32154 got:0x21957
2017-10-31T11:56:58.807Z,1509451018.807 [PNI_TCM](ERROR): CRC does not match. Expected:0x49624 got:0x44630
2017-10-31T11:57:02.013Z,1509451022.013 [PNI_TCM](ERROR): CRC does not match. Expected:0x16517 got:0x50204
2017-10-31T11:57:59.014Z,1509451079.014 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:58:11.775Z,1509451091.775 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004331
CHAN A1 (24V): -0.003461
CHAN A2 (12V): -0.002289
CHAN A3 (5V): -0.000074
CHAN B0 (3.3V): 0.000105
CHAN B1 (3.15aV): -0.000554
CHAN B2 (3.15bV): 0.000058
CHAN B3 (GND): -0.000179
OPEN: -0.000644
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T11:58:18.152Z,1509451098.152 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T11:58:18.152Z,1509451098.152 [NAL9602] No Fault, FailCount= 5
2017-10-31T11:58:18.475Z,1509451098.475 [NAL9602](INFO): Powering up NAL9602
2017-10-31T11:58:23.720Z,1509451103.720 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T11:58:23.720Z,1509451103.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T11:58:23.720Z,1509451103.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T11:58:23.758Z,1509451103.758 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T11:58:24.159Z,1509451104.159 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T11:58:24.159Z,1509451104.159 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T11:58:24.525Z,1509451104.525 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T11:58:24.526Z,1509451104.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T11:58:24.526Z,1509451104.526 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T11:58:29.276Z,1509451109.276 [NAL9602](INFO): NAL9602 initialized
2017-10-31T11:59:42.034Z,1509451182.034 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T11:59:52.850Z,1509451192.850 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134191
CHAN A1 (24V): -0.004188
CHAN A2 (12V): -0.002086
CHAN A3 (5V): 0.000059
CHAN B0 (3.3V): -0.000152
CHAN B1 (3.15aV): -0.000399
CHAN B2 (3.15bV): -0.000552
CHAN B3 (GND): 0.000338
OPEN: -0.000276
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:01:02.643Z,1509451262.643 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T11:56:02.5Z
2017-10-31T12:01:02.643Z,1509451262.643 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T12:01:02.644Z,1509451262.644 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T12:01:07.161Z,1509451267.161 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171030T210256/Courier0332.lzma
2017-10-31T12:01:07.933Z,1509451267.933 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0332.lzma.bak
2017-10-31T12:01:07.933Z,1509451267.933 [DataOverHttps](INFO): SBD MOMSN=5178865
2017-10-31T12:01:17.154Z,1509451277.154 [DataOverHttps](INFO): Sending 636 bytes from file Logs/20171030T210256/Express0333.lzma
2017-10-31T12:01:17.905Z,1509451277.905 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0333.lzma.bak
2017-10-31T12:01:17.905Z,1509451277.905 [DataOverHttps](INFO): SBD MOMSN=5178868
2017-10-31T12:01:18.401Z,1509451278.401 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T12:01:18.401Z,1509451278.401 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T12:01:18.401Z,1509451278.401 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T12:01:23.014Z,1509451283.014 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:01:24.574Z,1509451284.574 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:01:24.574Z,1509451284.574 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T12:01:24.574Z,1509451284.574 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:01:24.596Z,1509451284.596 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:01:24.987Z,1509451284.987 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:01:24.987Z,1509451284.987 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T12:01:25.387Z,1509451285.387 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:01:25.388Z,1509451285.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:01:25.388Z,1509451285.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:01:33.808Z,1509451293.808 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003914
CHAN A1 (24V): -0.004118
CHAN A2 (12V): -0.002750
CHAN A3 (5V): 0.000059
CHAN B0 (3.3V): -0.000227
CHAN B1 (3.15aV): -0.000557
CHAN B2 (3.15bV): -0.000113
CHAN B3 (GND): -0.000074
OPEN: -0.000453
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:02:54.371Z,1509451374.371 [BPC1](ERROR): Failed to parse message.
2017-10-31T12:02:54.371Z,1509451374.371 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T12:02:54.371Z,1509451374.371 [BPC1] Data Fault, FailCount= 1
2017-10-31T12:02:54.371Z,1509451374.371 [BPC1](ERROR): Data Fault
2017-10-31T12:02:54.411Z,1509451374.411 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T12:02:55.613Z,1509451375.613 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:02:55.613Z,1509451375.613 [BPC1] No Fault, FailCount= 1
2017-10-31T12:03:04.013Z,1509451384.013 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:03:14.774Z,1509451394.774 [BPC1](ERROR): Failed to parse message.
2017-10-31T12:03:14.774Z,1509451394.774 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T12:03:14.775Z,1509451394.775 [BPC1] Data Fault, FailCount= 2
2017-10-31T12:03:14.775Z,1509451394.775 [BPC1](ERROR): Data Fault
2017-10-31T12:03:14.797Z,1509451394.797 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T12:03:14.801Z,1509451394.801 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004304
CHAN A1 (24V): -0.004232
CHAN A2 (12V): -0.001871
CHAN A3 (5V): -0.000129
CHAN B0 (3.3V): 0.000281
CHAN B1 (3.15aV): -0.000555
CHAN B2 (3.15bV): -0.000393
CHAN B3 (GND): -0.000416
OPEN: -0.000680
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:03:15.995Z,1509451395.995 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:03:15.995Z,1509451395.995 [BPC1] No Fault, FailCount= 2
2017-10-31T12:03:31.391Z,1509451411.391 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T12:03:32.123Z,1509451412.123 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T12:04:02.909Z,1509451442.909 [NAL9602](INFO): Powering down
2017-10-31T12:04:25.573Z,1509451465.573 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:04:25.573Z,1509451465.573 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T12:04:25.573Z,1509451465.573 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:04:25.603Z,1509451465.603 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:04:25.981Z,1509451465.981 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:04:25.981Z,1509451465.981 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T12:04:26.360Z,1509451466.360 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:04:26.361Z,1509451466.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:04:26.361Z,1509451466.361 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:04:45.193Z,1509451485.193 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:04:55.944Z,1509451495.944 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134359
CHAN A1 (24V): -0.003630
CHAN A2 (12V): -0.001914
CHAN A3 (5V): 0.000503
CHAN B0 (3.3V): -0.000258
CHAN B1 (3.15aV): -0.000166
CHAN B2 (3.15bV): -0.000101
CHAN B3 (GND): -0.000248
OPEN: -0.000353
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:06:19.111Z,1509451579.111 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T12:06:19.111Z,1509451579.111 [Default:CheckIn:C.Wait] Stopped
2017-10-31T12:06:19.111Z,1509451579.111 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T12:06:19.111Z,1509451579.111 [Default:CheckIn:D] Running Loop=1
2017-10-31T12:06:19.505Z,1509451579.505 [Default:CheckIn:D] Stopped
2017-10-31T12:06:19.505Z,1509451579.505 [Default:CheckIn:E] Running Loop=1
2017-10-31T12:06:19.916Z,1509451579.916 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 809.196549 min 
2017-10-31T12:06:19.916Z,1509451579.916 [Default:CheckIn:E] Stopped
2017-10-31T12:06:19.916Z,1509451579.916 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T12:06:19.916Z,1509451579.916 [Default:CheckIn] Stopped
2017-10-31T12:06:19.916Z,1509451579.916 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T12:06:19.917Z,1509451579.917 [Default:CheckIn](INFO): Running loop #75
2017-10-31T12:06:19.917Z,1509451579.917 [Default:CheckIn] Running Loop=75
2017-10-31T12:06:19.917Z,1509451579.917 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T12:06:19.917Z,1509451579.917 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T12:06:23.467Z,1509451583.467 [NAL9602](INFO): Powering up
2017-10-31T12:06:26.319Z,1509451586.319 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:06:34.617Z,1509451594.617 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:06:37.081Z,1509451597.081 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002201
CHAN A1 (24V): -0.004477
CHAN A2 (12V): -0.001935
CHAN A3 (5V): 0.000005
CHAN B0 (3.3V): -0.000175
CHAN B1 (3.15aV): -0.000682
CHAN B2 (3.15bV): -0.000747
CHAN B3 (GND): -0.000185
OPEN: -0.000397
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:07:06.612Z,1509451626.612 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T12:07:06.685Z,1509451626.685 [NAL9602](FAULT): received: 
+CSQ:0

OK24, 2, 0, 0, 0

OK
2017-10-31T12:07:06.685Z,1509451626.685 [NAL9602] Data Fault, FailCount= 1
2017-10-31T12:07:06.685Z,1509451626.685 [NAL9602](ERROR): Data Fault
2017-10-31T12:07:06.779Z,1509451626.779 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T12:07:07.015Z,1509451627.015 [NAL9602](INFO): Powering down
2017-10-31T12:07:07.884Z,1509451627.884 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T12:07:07.884Z,1509451627.884 [NAL9602] No Fault, FailCount= 1
2017-10-31T12:07:26.382Z,1509451646.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:07:26.382Z,1509451646.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T12:07:26.382Z,1509451646.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:07:26.397Z,1509451646.397 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:07:26.397Z,1509451646.397 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:07:37.138Z,1509451657.138 [NAL9602](INFO): Powering up NAL9602
2017-10-31T12:07:47.940Z,1509451667.940 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:08:07.222Z,1509451687.222 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:08:18.039Z,1509451698.039 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134198
CHAN A1 (24V): -0.004550
CHAN A2 (12V): -0.002447
CHAN A3 (5V): 0.000023
CHAN B0 (3.3V): -0.000049
CHAN B1 (3.15aV): -0.000890
CHAN B2 (3.15bV): -0.000184
CHAN B3 (GND): -0.000286
OPEN: -0.000568
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:09:07.426Z,1509451747.426 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T12:09:07.426Z,1509451747.426 [BPC1] Data Fault, FailCount= 1
2017-10-31T12:09:07.426Z,1509451747.426 [BPC1](ERROR): Data Fault
2017-10-31T12:09:07.498Z,1509451747.498 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T12:09:08.676Z,1509451748.676 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:09:08.676Z,1509451748.676 [BPC1] No Fault, FailCount= 1
2017-10-31T12:09:48.215Z,1509451788.215 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:09:59.056Z,1509451799.056 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002413
CHAN A1 (24V): -0.003907
CHAN A2 (12V): -0.002163
CHAN A3 (5V): 0.000356
CHAN B0 (3.3V): 0.000052
CHAN B1 (3.15aV): -0.000089
CHAN B2 (3.15bV): -0.000073
CHAN B3 (GND): 0.000277
OPEN: -0.000488
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:10:12.571Z,1509451812.571 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T12:10:12.571Z,1509451812.571 [BPC1] Data Fault, FailCount= 1
2017-10-31T12:10:12.571Z,1509451812.571 [BPC1](ERROR): Data Fault
2017-10-31T12:10:12.639Z,1509451812.639 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T12:10:13.856Z,1509451813.856 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:10:13.856Z,1509451813.856 [BPC1] No Fault, FailCount= 1
2017-10-31T12:11:19.988Z,1509451879.988 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T12:06:19.9Z
2017-10-31T12:11:19.989Z,1509451879.989 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T12:11:19.994Z,1509451879.994 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T12:11:24.521Z,1509451884.521 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0336.lzma
2017-10-31T12:11:25.286Z,1509451885.286 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0336.lzma.bak
2017-10-31T12:11:25.286Z,1509451885.286 [DataOverHttps](INFO): SBD MOMSN=5178885
2017-10-31T12:11:29.581Z,1509451889.581 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:11:30.836Z,1509451890.836 [PNI_TCM](ERROR): CRC does not match. Expected:0x5243 got:0x49069
2017-10-31T12:11:34.728Z,1509451894.728 [DataOverHttps](INFO): Sending 713 bytes from file Logs/20171030T210256/Express0337.lzma
2017-10-31T12:11:35.529Z,1509451895.529 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0337.lzma.bak
2017-10-31T12:11:35.529Z,1509451895.529 [DataOverHttps](INFO): SBD MOMSN=5178887
2017-10-31T12:11:36.008Z,1509451896.008 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T12:11:36.008Z,1509451896.008 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T12:11:36.009Z,1509451896.009 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T12:11:39.613Z,1509451899.613 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T12:11:45.113Z,1509451905.113 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133559
CHAN A1 (24V): -0.003770
CHAN A2 (12V): -0.002059
CHAN A3 (5V): 0.000015
CHAN B0 (3.3V): 0.000241
CHAN B1 (3.15aV): -0.000275
CHAN B2 (3.15bV): -0.000258
CHAN B3 (GND): 0.000177
OPEN: -0.000601
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:12:10.242Z,1509451930.242 [NAL9602](INFO): Powering down
2017-10-31T12:13:15.321Z,1509451995.321 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:13:26.149Z,1509452006.149 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135183
CHAN A1 (24V): -0.003118
CHAN A2 (12V): -0.002291
CHAN A3 (5V): -0.000214
CHAN B0 (3.3V): 0.000411
CHAN B1 (3.15aV): -0.000511
CHAN B2 (3.15bV): -0.000367
CHAN B3 (GND): -0.000165
OPEN: -0.000517
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:13:31.720Z,1509452011.720 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T12:14:56.277Z,1509452096.277 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:15:07.024Z,1509452107.024 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003146
CHAN A1 (24V): -0.004003
CHAN A2 (12V): -0.002354
CHAN A3 (5V): -0.000005
CHAN B0 (3.3V): -0.000052
CHAN B1 (3.15aV): -0.000216
CHAN B2 (3.15bV): 0.000451
CHAN B3 (GND): 0.000005
OPEN: -0.000404
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:16:36.432Z,1509452196.432 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T12:16:36.433Z,1509452196.433 [Default:CheckIn:C.Wait] Stopped
2017-10-31T12:16:36.433Z,1509452196.433 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T12:16:36.433Z,1509452196.433 [Default:CheckIn:D] Running Loop=1
2017-10-31T12:16:36.847Z,1509452196.847 [Default:CheckIn:D] Stopped
2017-10-31T12:16:36.847Z,1509452196.847 [Default:CheckIn:E] Running Loop=1
2017-10-31T12:16:37.231Z,1509452197.231 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 819.485547 min 
2017-10-31T12:16:37.231Z,1509452197.231 [Default:CheckIn:E] Stopped
2017-10-31T12:16:37.231Z,1509452197.231 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T12:16:37.232Z,1509452197.232 [Default:CheckIn] Stopped
2017-10-31T12:16:37.232Z,1509452197.232 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T12:16:37.232Z,1509452197.232 [Default:CheckIn](INFO): Running loop #76
2017-10-31T12:16:37.232Z,1509452197.232 [Default:CheckIn] Running Loop=76
2017-10-31T12:16:37.232Z,1509452197.232 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T12:16:37.232Z,1509452197.232 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T12:16:37.256Z,1509452197.256 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:16:41.127Z,1509452201.127 [NAL9602](INFO): Powering up
2017-10-31T12:16:50.590Z,1509452210.590 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134450
CHAN A1 (24V): -0.004235
CHAN A2 (12V): -0.001659
CHAN A3 (5V): 0.000353
CHAN B0 (3.3V): -0.000543
CHAN B1 (3.15aV): 0.000130
CHAN B2 (3.15bV): -0.000060
CHAN B3 (GND): -0.000224
OPEN: -0.000176
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:16:52.128Z,1509452212.128 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:16:52.921Z,1509452212.921 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T12:16:52.922Z,1509452212.922 [NAL9602] Data Fault, FailCount= 2
2017-10-31T12:16:52.922Z,1509452212.922 [NAL9602](ERROR): Data Fault
2017-10-31T12:16:53.010Z,1509452213.010 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T12:16:53.322Z,1509452213.322 [NAL9602](INFO): Powering down
2017-10-31T12:16:54.192Z,1509452214.192 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T12:16:54.192Z,1509452214.192 [NAL9602] No Fault, FailCount= 2
2017-10-31T12:17:23.726Z,1509452243.726 [NAL9602](INFO): Powering up NAL9602
2017-10-31T12:17:34.924Z,1509452254.924 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:18:20.814Z,1509452300.814 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:18:31.608Z,1509452311.608 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003294
CHAN A1 (24V): -0.003517
CHAN A2 (12V): -0.002291
CHAN A3 (5V): 0.000262
CHAN B0 (3.3V): -0.000190
CHAN B1 (3.15aV): -0.000226
CHAN B2 (3.15bV): -0.000025
CHAN B3 (GND): -0.000013
OPEN: -0.000588
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:20:01.920Z,1509452401.920 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:20:12.735Z,1509452412.735 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133991
CHAN A1 (24V): -0.004550
CHAN A2 (12V): -0.002017
CHAN A3 (5V): 0.000167
CHAN B0 (3.3V): -0.000599
CHAN B1 (3.15aV): -0.000384
CHAN B2 (3.15bV): 0.000048
CHAN B3 (GND): -0.000026
OPEN: -0.000570
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:20:42.868Z,1509452442.868 [PNI_TCM](ERROR): CRC does not match. Expected:0x57402 got:0x32775
2017-10-31T12:20:50.855Z,1509452450.855 [PNI_TCM](ERROR): CRC does not match. Expected:0x22923 got:0x59163
2017-10-31T12:20:52.458Z,1509452452.458 [PNI_TCM](ERROR): CRC does not match. Expected:0x22013 got:0x10966
2017-10-31T12:20:57.250Z,1509452457.250 [PNI_TCM](ERROR): CRC does not match. Expected:0x6855 got:0x60189
2017-10-31T12:20:57.656Z,1509452457.656 [PNI_TCM](ERROR): CRC does not match. Expected:0x31374 got:0x34567
2017-10-31T12:21:06.858Z,1509452466.858 [PNI_TCM](ERROR): CRC does not match. Expected:0x3935 got:0x6978
2017-10-31T12:21:08.455Z,1509452468.455 [PNI_TCM](ERROR): CRC does not match. Expected:0x13792 got:0x6978
2017-10-31T12:21:13.265Z,1509452473.265 [PNI_TCM](ERROR): CRC does not match. Expected:0x40399 got:0x7490
2017-10-31T12:21:19.669Z,1509452479.669 [PNI_TCM](ERROR): CRC does not match. Expected:0x37417 got:0x7360
2017-10-31T12:21:27.663Z,1509452487.663 [PNI_TCM](ERROR): CRC does not match. Expected:0x44642 got:0x43072
2017-10-31T12:21:28.469Z,1509452488.469 [BPC1](ERROR): Failed to receive battery data
2017-10-31T12:21:28.469Z,1509452488.469 [BPC1] Communications Fault, FailCount= 1
2017-10-31T12:21:28.469Z,1509452488.469 [BPC1](ERROR): Communications Fault
2017-10-31T12:21:28.520Z,1509452488.520 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T12:21:29.705Z,1509452489.705 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:21:29.705Z,1509452489.705 [BPC1] No Fault, FailCount= 1
2017-10-31T12:21:30.864Z,1509452490.864 [PNI_TCM](ERROR): CRC does not match. Expected:0x26884 got:0x58872
2017-10-31T12:21:32.852Z,1509452492.852 [PNI_TCM](ERROR): CRC does not match. Expected:0x22909 got:0x57203
2017-10-31T12:21:37.287Z,1509452497.287 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T12:16:37.2Z
2017-10-31T12:21:37.287Z,1509452497.287 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T12:21:37.287Z,1509452497.287 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T12:21:41.759Z,1509452501.759 [PNI_TCM](ERROR): CRC does not match. Expected:0x26620 got:0x57125
2017-10-31T12:21:41.760Z,1509452501.760 [PNI_TCM](ERROR): CRC does not match. Expected:0x60716 got:0x3448
2017-10-31T12:21:41.760Z,1509452501.760 [PNI_TCM](ERROR): CRC does not match. Expected:0x31954 got:0x21834
2017-10-31T12:21:41.761Z,1509452501.761 [PNI_TCM](ERROR): CRC does not match. Expected:0x55305 got:0x47383
2017-10-31T12:21:41.761Z,1509452501.761 [PNI_TCM](ERROR): CRC does not match. Expected:0x3503 got:0x32081
2017-10-31T12:21:41.761Z,1509452501.761 [PNI_TCM](ERROR): CRC does not match. Expected:0x64111 got:0x18868
2017-10-31T12:21:41.762Z,1509452501.762 [PNI_TCM](ERROR): CRC does not match. Expected:0x45025 got:0x46636
2017-10-31T12:21:41.762Z,1509452501.762 [PNI_TCM](ERROR): CRC does not match. Expected:0x53606 got:0x53687
2017-10-31T12:21:41.893Z,1509452501.893 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0340.lzma
2017-10-31T12:21:42.678Z,1509452502.678 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0340.lzma.bak
2017-10-31T12:21:42.679Z,1509452502.679 [DataOverHttps](INFO): SBD MOMSN=5178905
2017-10-31T12:21:42.779Z,1509452502.779 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:21:52.101Z,1509452512.101 [DataOverHttps](INFO): Sending 655 bytes from file Logs/20171030T210256/Express0341.lzma
2017-10-31T12:21:52.905Z,1509452512.905 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0341.lzma.bak
2017-10-31T12:21:52.906Z,1509452512.906 [DataOverHttps](INFO): SBD MOMSN=5178907
2017-10-31T12:21:53.416Z,1509452513.416 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T12:21:53.416Z,1509452513.416 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T12:21:53.416Z,1509452513.416 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T12:22:01.247Z,1509452521.247 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002713
CHAN A1 (24V): -0.004330
CHAN A2 (12V): -0.002089
CHAN A3 (5V): 0.000500
CHAN B0 (3.3V): 0.000141
CHAN B1 (3.15aV): 0.000139
CHAN B2 (3.15bV): -0.000202
CHAN B3 (GND): -0.000213
OPEN: -0.000648
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:22:16.794Z,1509452536.794 [BPC1](ERROR): Failed to receive battery data
2017-10-31T12:22:16.795Z,1509452536.795 [BPC1] Communications Fault, FailCount= 1
2017-10-31T12:22:16.795Z,1509452536.795 [BPC1](ERROR): Communications Fault
2017-10-31T12:22:16.848Z,1509452536.848 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T12:22:18.013Z,1509452538.013 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:22:18.014Z,1509452538.014 [BPC1] No Fault, FailCount= 1
2017-10-31T12:22:26.432Z,1509452546.432 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:22:26.432Z,1509452546.432 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T12:22:26.857Z,1509452546.857 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:22:26.858Z,1509452546.858 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:22:26.858Z,1509452546.858 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:22:37.962Z,1509452557.962 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T12:23:08.623Z,1509452588.623 [NAL9602](INFO): Powering down
2017-10-31T12:23:31.478Z,1509452611.478 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:23:31.881Z,1509452611.881 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T12:23:42.319Z,1509452622.319 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002963
CHAN A1 (24V): -0.003471
CHAN A2 (12V): -0.002286
CHAN A3 (5V): -0.000136
CHAN B0 (3.3V): -0.000137
CHAN B1 (3.15aV): -0.000031
CHAN B2 (3.15bV): -0.000320
CHAN B3 (GND): 0.000159
OPEN: -0.000441
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:23:59.662Z,1509452639.662 [PNI_TCM](ERROR): CRC does not match. Expected:0x55974 got:0x10976
2017-10-31T12:24:09.264Z,1509452649.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x20444 got:0x32283
2017-10-31T12:24:12.466Z,1509452652.466 [PNI_TCM](ERROR): CRC does not match. Expected:0x48777 got:0x45283
2017-10-31T12:24:18.859Z,1509452658.859 [PNI_TCM](ERROR): CRC does not match. Expected:0x41069 got:0x6335
2017-10-31T12:24:20.464Z,1509452660.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x24406 got:0x40348
2017-10-31T12:24:22.067Z,1509452662.067 [PNI_TCM](ERROR): CRC does not match. Expected:0x21261 got:0x7490
2017-10-31T12:24:23.671Z,1509452663.671 [PNI_TCM](ERROR): CRC does not match. Expected:0x15493 got:0x16981
2017-10-31T12:24:30.068Z,1509452670.068 [PNI_TCM](ERROR): CRC does not match. Expected:0x17626 got:0x23065
2017-10-31T12:24:33.267Z,1509452673.267 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T12:24:34.867Z,1509452674.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x39737 got:0x6978
2017-10-31T12:24:42.867Z,1509452682.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T12:24:52.463Z,1509452692.463 [PNI_TCM](ERROR): CRC does not match. Expected:0x47999 got:0x40243
2017-10-31T12:25:12.665Z,1509452712.665 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:25:23.489Z,1509452723.489 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134578
CHAN A1 (24V): -0.004107
CHAN A2 (12V): -0.002306
CHAN A3 (5V): 0.000015
CHAN B0 (3.3V): -0.000395
CHAN B1 (3.15aV): -0.000696
CHAN B2 (3.15bV): -0.000190
CHAN B3 (GND): -0.000201
OPEN: -0.000292
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:25:27.042Z,1509452727.042 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:25:27.042Z,1509452727.042 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T12:25:27.042Z,1509452727.042 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:25:27.055Z,1509452727.055 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:25:27.475Z,1509452727.475 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:25:27.475Z,1509452727.475 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T12:25:27.855Z,1509452727.855 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:25:27.856Z,1509452727.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:25:27.856Z,1509452727.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:26:04.466Z,1509452764.466 [PNI_TCM](ERROR): CRC does not match. Expected:0x36453 got:0x40609
2017-10-31T12:26:14.056Z,1509452774.056 [PNI_TCM](ERROR): CRC does not match. Expected:0x57752 got:0x39192
2017-10-31T12:26:14.460Z,1509452774.460 [PNI_TCM](ERROR): CRC does not match. Expected:0x58760 got:0x13081
2017-10-31T12:26:23.667Z,1509452783.667 [PNI_TCM](ERROR): CRC does not match. Expected:0x53587 got:0x1857
2017-10-31T12:26:50.050Z,1509452810.050 [PNI_TCM](ERROR): CRC does not match. Expected:0x42522 got:0x33070
2017-10-31T12:26:53.715Z,1509452813.715 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:26:54.079Z,1509452814.079 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T12:26:54.080Z,1509452814.080 [Default:CheckIn:C.Wait] Stopped
2017-10-31T12:26:54.080Z,1509452814.080 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T12:26:54.080Z,1509452814.080 [Default:CheckIn:D] Running Loop=1
2017-10-31T12:26:54.505Z,1509452814.505 [Default:CheckIn:D] Stopped
2017-10-31T12:26:54.505Z,1509452814.505 [Default:CheckIn:E] Running Loop=1
2017-10-31T12:26:54.875Z,1509452814.875 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 829.779818 min 
2017-10-31T12:26:54.875Z,1509452814.875 [Default:CheckIn:E] Stopped
2017-10-31T12:26:54.875Z,1509452814.875 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T12:26:54.875Z,1509452814.875 [Default:CheckIn] Stopped
2017-10-31T12:26:54.876Z,1509452814.876 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T12:26:54.876Z,1509452814.876 [Default:CheckIn](INFO): Running loop #77
2017-10-31T12:26:54.876Z,1509452814.876 [Default:CheckIn] Running Loop=77
2017-10-31T12:26:54.876Z,1509452814.876 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T12:26:54.876Z,1509452814.876 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T12:26:58.333Z,1509452818.333 [NAL9602](INFO): Powering up
2017-10-31T12:27:07.635Z,1509452827.635 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.002544
CHAN A1 (24V): 4.657929
CHAN A2 (12V): -0.002138
CHAN A3 (5V): 0.000070
CHAN B0 (3.3V): 0.000091
CHAN B1 (3.15aV): -0.000237
CHAN B2 (3.15bV): -0.000467
CHAN B3 (GND): -0.000013
OPEN: -0.000582
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:27:09.140Z,1509452829.140 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:27:41.136Z,1509452861.136 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T12:27:41.213Z,1509452861.213 [NAL9602](FAULT): received: 
+CSQ:0

OK24, 2, 0, 0, 0

OK
2017-10-31T12:27:41.213Z,1509452861.213 [NAL9602] Data Fault, FailCount= 3
2017-10-31T12:27:41.213Z,1509452861.213 [NAL9602](ERROR): Data Fault
2017-10-31T12:27:41.308Z,1509452861.308 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T12:27:41.539Z,1509452861.539 [NAL9602](INFO): Powering down
2017-10-31T12:27:42.398Z,1509452862.398 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T12:27:42.398Z,1509452862.398 [NAL9602] No Fault, FailCount= 3
2017-10-31T12:28:11.731Z,1509452891.731 [NAL9602](INFO): Powering up NAL9602
2017-10-31T12:28:22.932Z,1509452902.932 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:28:23.732Z,1509452903.732 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T12:28:23.732Z,1509452903.732 [NAL9602] Data Fault, FailCount= 4
2017-10-31T12:28:23.732Z,1509452903.732 [NAL9602](ERROR): Data Fault
2017-10-31T12:28:23.827Z,1509452903.827 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T12:28:24.122Z,1509452904.122 [NAL9602](INFO): Powering down
2017-10-31T12:28:25.012Z,1509452905.012 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T12:28:25.012Z,1509452905.012 [NAL9602] No Fault, FailCount= 4
2017-10-31T12:28:28.163Z,1509452908.163 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:28:28.163Z,1509452908.163 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T12:28:28.163Z,1509452908.163 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:28:28.176Z,1509452908.176 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:28:28.591Z,1509452908.591 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:28:28.591Z,1509452908.591 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T12:28:28.965Z,1509452908.965 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:28:28.965Z,1509452908.965 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:28:28.965Z,1509452908.965 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:28:37.782Z,1509452917.782 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:28:48.633Z,1509452928.633 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134834
CHAN A1 (24V): -0.003647
CHAN A2 (12V): -0.002110
CHAN A3 (5V): 0.000585
CHAN B0 (3.3V): -0.000010
CHAN B1 (3.15aV): -0.000205
CHAN B2 (3.15bV): -0.000248
CHAN B3 (GND): 0.000255
OPEN: -0.000500
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:28:54.126Z,1509452934.126 [NAL9602](INFO): Powering up NAL9602
2017-10-31T12:29:05.155Z,1509452945.155 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:30:18.823Z,1509453018.823 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:30:29.616Z,1509453029.616 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002486
CHAN A1 (24V): -0.004854
CHAN A2 (12V): -0.002241
CHAN A3 (5V): 0.000806
CHAN B0 (3.3V): 0.000205
CHAN B1 (3.15aV): -0.000401
CHAN B2 (3.15bV): -0.000805
CHAN B3 (GND): -0.000150
OPEN: -0.000594
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:31:28.980Z,1509453088.980 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:31:28.980Z,1509453088.980 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T12:31:28.980Z,1509453088.980 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:31:28.994Z,1509453088.994 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:31:29.403Z,1509453089.403 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:31:29.403Z,1509453089.403 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T12:31:29.771Z,1509453089.771 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:31:29.772Z,1509453089.772 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:31:29.772Z,1509453089.772 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:31:55.040Z,1509453115.040 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T12:26:54.9Z
2017-10-31T12:31:55.040Z,1509453115.040 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T12:31:55.041Z,1509453115.041 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T12:31:59.642Z,1509453119.642 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0344.lzma
2017-10-31T12:31:59.744Z,1509453119.744 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:32:00.406Z,1509453120.406 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0344.lzma.bak
2017-10-31T12:32:00.406Z,1509453120.406 [DataOverHttps](INFO): SBD MOMSN=5178924
2017-10-31T12:32:00.450Z,1509453120.450 [PNI_TCM](ERROR): CRC does not match. Expected:0x40024 got:0x6978
2017-10-31T12:32:11.144Z,1509453131.144 [DataOverHttps](INFO): Sending 697 bytes from file Logs/20171030T210256/Express0345.lzma
2017-10-31T12:32:11.952Z,1509453131.952 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0345.lzma.bak
2017-10-31T12:32:11.952Z,1509453131.952 [DataOverHttps](INFO): SBD MOMSN=5178926
2017-10-31T12:32:11.963Z,1509453131.963 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T12:32:12.426Z,1509453132.426 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T12:32:12.426Z,1509453132.426 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T12:32:12.426Z,1509453132.426 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T12:32:19.153Z,1509453139.153 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133594
CHAN A1 (24V): -0.004427
CHAN A2 (12V): -0.002630
CHAN A3 (5V): -0.000064
CHAN B0 (3.3V): -0.000119
CHAN B1 (3.15aV): 0.000074
CHAN B2 (3.15bV): -0.000464
CHAN B3 (GND): -0.000200
OPEN: -0.000421
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:32:41.897Z,1509453161.897 [BPC1](ERROR): Failed to parse message.
2017-10-31T12:32:41.897Z,1509453161.897 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T12:32:41.897Z,1509453161.897 [BPC1] Data Fault, FailCount= 1
2017-10-31T12:32:41.897Z,1509453161.897 [BPC1](ERROR): Data Fault
2017-10-31T12:32:41.919Z,1509453161.919 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T12:32:42.663Z,1509453162.663 [NAL9602](INFO): Powering down
2017-10-31T12:32:43.121Z,1509453163.121 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:32:43.121Z,1509453163.121 [BPC1] No Fault, FailCount= 1
2017-10-31T12:33:32.199Z,1509453212.199 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T12:33:49.424Z,1509453229.424 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:34:00.265Z,1509453240.265 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134784
CHAN A1 (24V): -0.004009
CHAN A2 (12V): -0.002050
CHAN A3 (5V): 0.000373
CHAN B0 (3.3V): -0.000381
CHAN B1 (3.15aV): -0.000525
CHAN B2 (3.15bV): 0.000272
CHAN B3 (GND): 0.000123
OPEN: -0.000918
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:34:30.164Z,1509453270.164 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:34:30.164Z,1509453270.164 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T12:34:30.164Z,1509453270.164 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:34:30.201Z,1509453270.201 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:34:30.551Z,1509453270.551 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:34:30.551Z,1509453270.551 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T12:34:30.940Z,1509453270.940 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:34:30.940Z,1509453270.940 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:34:30.941Z,1509453270.941 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:34:33.310Z,1509453273.310 [BPC1](ERROR): Failed to receive battery data
2017-10-31T12:34:33.310Z,1509453273.310 [BPC1] Communications Fault, FailCount= 1
2017-10-31T12:34:33.310Z,1509453273.310 [BPC1](ERROR): Communications Fault
2017-10-31T12:34:33.464Z,1509453273.464 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T12:34:34.576Z,1509453274.576 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:34:34.576Z,1509453274.576 [BPC1] No Fault, FailCount= 1
2017-10-31T12:35:30.398Z,1509453330.398 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:35:41.222Z,1509453341.222 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003395
CHAN A1 (24V): -0.003620
CHAN A2 (12V): -0.001521
CHAN A3 (5V): -0.000005
CHAN B0 (3.3V): 0.000070
CHAN B1 (3.15aV): -0.000496
CHAN B2 (3.15bV): -0.000399
CHAN B3 (GND): 0.000321
OPEN: -0.000573
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:37:11.491Z,1509453431.491 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:37:13.077Z,1509453433.077 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T12:37:13.077Z,1509453433.077 [Default:CheckIn:C.Wait] Stopped
2017-10-31T12:37:13.077Z,1509453433.077 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T12:37:13.078Z,1509453433.078 [Default:CheckIn:D] Running Loop=1
2017-10-31T12:37:13.445Z,1509453433.445 [Default:CheckIn:D] Stopped
2017-10-31T12:37:13.445Z,1509453433.445 [Default:CheckIn:E] Running Loop=1
2017-10-31T12:37:13.862Z,1509453433.862 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 840.095508 min 
2017-10-31T12:37:13.862Z,1509453433.862 [Default:CheckIn:E] Stopped
2017-10-31T12:37:13.862Z,1509453433.862 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T12:37:13.862Z,1509453433.862 [Default:CheckIn] Stopped
2017-10-31T12:37:13.866Z,1509453433.866 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T12:37:13.867Z,1509453433.867 [Default:CheckIn](INFO): Running loop #78
2017-10-31T12:37:13.867Z,1509453433.867 [Default:CheckIn] Running Loop=78
2017-10-31T12:37:13.867Z,1509453433.867 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T12:37:13.867Z,1509453433.867 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T12:37:17.661Z,1509453437.661 [NAL9602](INFO): Powering up
2017-10-31T12:37:24.741Z,1509453444.741 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135169
CHAN A1 (24V): -0.003889
CHAN A2 (12V): -0.002347
CHAN A3 (5V): 0.000058
CHAN B0 (3.3V): 0.000135
CHAN B1 (3.15aV): -0.000843
CHAN B2 (3.15bV): -0.000079
CHAN B3 (GND): 0.000027
OPEN: -0.000651
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:37:28.659Z,1509453448.659 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:37:31.105Z,1509453451.105 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:37:31.105Z,1509453451.105 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T12:37:31.105Z,1509453451.105 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:37:31.119Z,1509453451.119 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:37:31.573Z,1509453451.573 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:37:31.573Z,1509453451.573 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T12:37:31.923Z,1509453451.923 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:37:31.924Z,1509453451.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:37:31.924Z,1509453451.924 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:38:54.912Z,1509453534.912 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:39:05.742Z,1509453545.742 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002768
CHAN A1 (24V): -0.003268
CHAN A2 (12V): -0.001774
CHAN A3 (5V): 0.000079
CHAN B0 (3.3V): 0.000244
CHAN B1 (3.15aV): -0.000002
CHAN B2 (3.15bV): -0.000416
CHAN B3 (GND): -0.000139
OPEN: -0.000438
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:40:32.208Z,1509453632.208 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:40:32.208Z,1509453632.208 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T12:40:32.208Z,1509453632.208 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:40:32.229Z,1509453632.229 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:40:32.657Z,1509453632.657 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:40:32.657Z,1509453632.657 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T12:40:33.025Z,1509453633.025 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:40:33.025Z,1509453633.025 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:40:33.026Z,1509453633.026 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:40:35.843Z,1509453635.843 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:40:46.659Z,1509453646.659 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134465
CHAN A1 (24V): -0.003979
CHAN A2 (12V): -0.001874
CHAN A3 (5V): 0.000277
CHAN B0 (3.3V): -0.000554
CHAN B1 (3.15aV): 0.000673
CHAN B2 (3.15bV): -0.000408
CHAN B3 (GND): 0.000105
OPEN: -0.000379
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:41:38.642Z,1509453698.642 [BPC1](ERROR): Failed to parse message.
2017-10-31T12:41:38.642Z,1509453698.642 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T12:41:38.643Z,1509453698.643 [BPC1] Data Fault, FailCount= 1
2017-10-31T12:41:38.643Z,1509453698.643 [BPC1](ERROR): Data Fault
2017-10-31T12:41:38.705Z,1509453698.705 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T12:41:39.904Z,1509453699.904 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:41:39.904Z,1509453699.904 [BPC1] No Fault, FailCount= 1
2017-10-31T12:42:13.869Z,1509453733.869 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T12:37:13.9Z
2017-10-31T12:42:13.869Z,1509453733.869 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T12:42:13.869Z,1509453733.869 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T12:42:18.387Z,1509453738.387 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:42:18.445Z,1509453738.445 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0348.lzma
2017-10-31T12:42:19.204Z,1509453739.204 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0348.lzma.bak
2017-10-31T12:42:19.205Z,1509453739.205 [DataOverHttps](INFO): SBD MOMSN=5178944
2017-10-31T12:42:24.106Z,1509453744.106 [PNI_TCM](ERROR): CRC does not match. Expected:0x59668 got:0x43136
2017-10-31T12:42:29.348Z,1509453749.348 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16541
2017-10-31T12:42:29.348Z,1509453749.348 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16541
2017-10-31T12:42:29.349Z,1509453749.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16542
2017-10-31T12:42:29.378Z,1509453749.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T12:42:29.379Z,1509453749.379 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T12:42:29.379Z,1509453749.379 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16541
2017-10-31T12:42:29.379Z,1509453749.379 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16541
2017-10-31T12:42:29.380Z,1509453749.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16542
2017-10-31T12:42:29.380Z,1509453749.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T12:42:29.380Z,1509453749.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16542
2017-10-31T12:42:29.574Z,1509453749.574 [DataOverHttps](INFO): Sending 625 bytes from file Logs/20171030T210256/Express0349.lzma
2017-10-31T12:42:29.622Z,1509453749.622 [PNI_TCM](FAULT): Failed to acquire valid data within timeout.
2017-10-31T12:42:29.622Z,1509453749.622 [PNI_TCM] Data Fault, FailCount= 1
2017-10-31T12:42:29.622Z,1509453749.622 [PNI_TCM](ERROR): Data Fault
2017-10-31T12:42:29.629Z,1509453749.629 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.193404 seconds old.
2017-10-31T12:42:29.631Z,1509453749.631 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.185691 seconds old.
2017-10-31T12:42:29.645Z,1509453749.645 [CBIT](ERROR): Data Fault in component: PNI_TCM
2017-10-31T12:42:29.999Z,1509453749.999 [PNI_TCM](INFO): Powering down
2017-10-31T12:42:30.099Z,1509453750.099 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.663851 seconds old.
2017-10-31T12:42:30.102Z,1509453750.102 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.655932 seconds old.
2017-10-31T12:42:30.375Z,1509453750.375 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0349.lzma.bak
2017-10-31T12:42:30.375Z,1509453750.375 [DataOverHttps](INFO): SBD MOMSN=5178946
2017-10-31T12:42:30.411Z,1509453750.411 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.975845 seconds old.
2017-10-31T12:42:30.414Z,1509453750.414 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.967926 seconds old.
2017-10-31T12:42:30.837Z,1509453750.837 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.401617 seconds old.
2017-10-31T12:42:30.840Z,1509453750.840 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.393698 seconds old.
2017-10-31T12:42:30.842Z,1509453750.842 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T12:42:30.842Z,1509453750.842 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T12:42:30.842Z,1509453750.842 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T12:42:31.202Z,1509453751.202 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.766893 seconds old.
2017-10-31T12:42:31.205Z,1509453751.205 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.759080 seconds old.
2017-10-31T12:42:31.218Z,1509453751.218 [CBIT](INFO): Clearing failed state for component PNI_TCM
2017-10-31T12:42:31.218Z,1509453751.218 [PNI_TCM] No Fault, FailCount= 1
2017-10-31T12:42:34.416Z,1509453754.416 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T12:42:34.490Z,1509453754.490 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.054894 seconds old.
2017-10-31T12:42:34.493Z,1509453754.493 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.046975 seconds old.
2017-10-31T12:42:34.630Z,1509453754.630 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.185997 seconds old.
2017-10-31T12:42:34.632Z,1509453754.632 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.186297 seconds old.
2017-10-31T12:42:35.047Z,1509453755.047 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.611274 seconds old.
2017-10-31T12:42:35.049Z,1509453755.049 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.603355 seconds old.
2017-10-31T12:42:35.448Z,1509453755.448 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.012808 seconds old.
2017-10-31T12:42:35.451Z,1509453755.451 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.004889 seconds old.
2017-10-31T12:42:35.845Z,1509453755.845 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.409035 seconds old.
2017-10-31T12:42:35.847Z,1509453755.847 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.401116 seconds old.
2017-10-31T12:42:36.254Z,1509453756.254 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.818881 seconds old.
2017-10-31T12:42:36.257Z,1509453756.257 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.810968 seconds old.
2017-10-31T12:42:36.623Z,1509453756.623 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.186964 seconds old.
2017-10-31T12:42:36.625Z,1509453756.625 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.179151 seconds old.
2017-10-31T12:42:37.030Z,1509453757.030 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.594910 seconds old.
2017-10-31T12:42:37.033Z,1509453757.033 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.586991 seconds old.
2017-10-31T12:42:37.475Z,1509453757.475 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002562
CHAN A1 (24V): -0.004616
CHAN A2 (12V): -0.002462
CHAN A3 (5V): 0.000314
CHAN B0 (3.3V): -0.000069
CHAN B1 (3.15aV): -0.000331
CHAN B2 (3.15bV): -0.000443
CHAN B3 (GND): -0.000016
OPEN: -0.000547
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:43:04.602Z,1509453784.602 [NAL9602](INFO): Powering down
2017-10-31T12:43:34.804Z,1509453814.804 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:43:34.804Z,1509453814.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T12:43:34.804Z,1509453814.804 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:43:34.818Z,1509453814.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:43:34.818Z,1509453814.818 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T12:43:34.966Z,1509453814.966 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:43:34.966Z,1509453814.966 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T12:43:35.281Z,1509453815.281 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:43:35.282Z,1509453815.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:43:35.282Z,1509453815.282 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:44:07.715Z,1509453847.715 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:44:18.532Z,1509453858.532 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002977
CHAN A1 (24V): -0.003620
CHAN A2 (12V): -0.002176
CHAN A3 (5V): 0.000542
CHAN B0 (3.3V): -0.000119
CHAN B1 (3.15aV): -0.000063
CHAN B2 (3.15bV): -0.000175
CHAN B3 (GND): 0.000185
OPEN: -0.000238
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:45:41.756Z,1509453941.756 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T12:45:41.756Z,1509453941.756 [BPC1] Data Fault, FailCount= 1
2017-10-31T12:45:41.756Z,1509453941.756 [BPC1](ERROR): Data Fault
2017-10-31T12:45:41.811Z,1509453941.811 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T12:45:43.009Z,1509453943.009 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:45:43.009Z,1509453943.009 [BPC1] No Fault, FailCount= 1
2017-10-31T12:45:48.602Z,1509453948.602 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:45:59.427Z,1509453959.427 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134648
CHAN A1 (24V): -0.004224
CHAN A2 (12V): -0.001823
CHAN A3 (5V): 0.000167
CHAN B0 (3.3V): -0.000387
CHAN B1 (3.15aV): -0.000161
CHAN B2 (3.15bV): -0.000132
CHAN B3 (GND): 0.000244
OPEN: -0.000377
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:46:35.433Z,1509453995.433 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:46:35.433Z,1509453995.433 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T12:46:35.433Z,1509453995.433 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:46:35.476Z,1509453995.476 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:46:35.610Z,1509453995.610 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:46:35.610Z,1509453995.610 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T12:46:35.968Z,1509453995.968 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:46:35.968Z,1509453995.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:46:35.968Z,1509453995.968 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:47:29.572Z,1509454049.572 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:47:31.541Z,1509454051.541 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T12:47:31.541Z,1509454051.541 [Default:CheckIn:C.Wait] Stopped
2017-10-31T12:47:31.542Z,1509454051.542 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T12:47:31.542Z,1509454051.542 [Default:CheckIn:D] Running Loop=1
2017-10-31T12:47:32.018Z,1509454052.018 [Default:CheckIn:D] Stopped
2017-10-31T12:47:32.018Z,1509454052.018 [Default:CheckIn:E] Running Loop=1
2017-10-31T12:47:32.343Z,1509454052.343 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 850.405078 min 
2017-10-31T12:47:32.343Z,1509454052.343 [Default:CheckIn:E] Stopped
2017-10-31T12:47:32.343Z,1509454052.343 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T12:47:32.343Z,1509454052.343 [Default:CheckIn] Stopped
2017-10-31T12:47:32.343Z,1509454052.343 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T12:47:32.344Z,1509454052.344 [Default:CheckIn](INFO): Running loop #79
2017-10-31T12:47:32.344Z,1509454052.344 [Default:CheckIn] Running Loop=79
2017-10-31T12:47:32.344Z,1509454052.344 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T12:47:32.344Z,1509454052.344 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T12:47:35.802Z,1509454055.802 [NAL9602](INFO): Powering up
2017-10-31T12:47:42.659Z,1509454062.659 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003109
CHAN A1 (24V): -0.004171
CHAN A2 (12V): -0.002274
CHAN A3 (5V): 0.000295
CHAN B0 (3.3V): 0.000108
CHAN B1 (3.15aV): -0.000207
CHAN B2 (3.15bV): -0.000039
CHAN B3 (GND): 0.000108
OPEN: -0.000462
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:47:46.608Z,1509454066.608 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:47:47.428Z,1509454067.428 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T12:47:47.428Z,1509454067.428 [NAL9602] Data Fault, FailCount= 5
2017-10-31T12:47:47.428Z,1509454067.428 [NAL9602](ERROR): Data Fault
2017-10-31T12:47:47.529Z,1509454067.529 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T12:47:47.530Z,1509454067.530 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T12:47:47.822Z,1509454067.822 [NAL9602](INFO): Powering down
2017-10-31T12:47:47.886Z,1509454067.886 [CBIT](INFO): Critical error at 20171031T124747
2017-10-31T12:49:12.838Z,1509454152.838 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:49:23.664Z,1509454163.664 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003040
CHAN A1 (24V): -0.003691
CHAN A2 (12V): -0.002054
CHAN A3 (5V): 0.000383
CHAN B0 (3.3V): -0.000066
CHAN B1 (3.15aV): -0.000134
CHAN B2 (3.15bV): -0.000366
CHAN B3 (GND): -0.000235
OPEN: -0.000542
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:49:36.145Z,1509454176.145 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:49:36.146Z,1509454176.146 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T12:49:36.146Z,1509454176.146 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:49:36.203Z,1509454176.203 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:49:36.340Z,1509454176.340 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:49:36.344Z,1509454176.344 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T12:49:36.658Z,1509454176.658 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:49:36.658Z,1509454176.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:49:36.659Z,1509454176.659 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:49:47.507Z,1509454187.507 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T12:49:47.507Z,1509454187.507 [NAL9602] No Fault, FailCount= 5
2017-10-31T12:49:47.831Z,1509454187.831 [NAL9602](INFO): Powering up NAL9602
2017-10-31T12:49:59.030Z,1509454199.030 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:50:53.798Z,1509454253.798 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:51:04.588Z,1509454264.588 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003085
CHAN A1 (24V): -0.004109
CHAN A2 (12V): -0.001842
CHAN A3 (5V): 0.000716
CHAN B0 (3.3V): 0.000051
CHAN B1 (3.15aV): -0.000287
CHAN B2 (3.15bV): -0.000149
CHAN B3 (GND): 0.000090
OPEN: -0.000410
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:51:41.731Z,1509454301.731 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T12:51:41.731Z,1509454301.731 [BPC1] Data Fault, FailCount= 1
2017-10-31T12:51:41.731Z,1509454301.731 [BPC1](ERROR): Data Fault
2017-10-31T12:51:41.795Z,1509454301.795 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T12:51:42.955Z,1509454302.955 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T12:51:42.955Z,1509454302.955 [BPC1] No Fault, FailCount= 1
2017-10-31T12:51:59.710Z,1509454319.710 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T12:51:59.710Z,1509454319.710 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T12:52:32.576Z,1509454352.576 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T12:47:32.3Z
2017-10-31T12:52:32.576Z,1509454352.576 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T12:52:32.576Z,1509454352.576 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T12:52:37.035Z,1509454357.035 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:52:37.035Z,1509454357.035 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T12:52:37.035Z,1509454357.035 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:52:37.049Z,1509454357.049 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:52:37.050Z,1509454357.050 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:52:37.139Z,1509454357.139 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20171030T210256/Courier0352.lzma
2017-10-31T12:52:37.215Z,1509454357.215 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:52:37.215Z,1509454357.215 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T12:52:37.545Z,1509454357.545 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:52:37.546Z,1509454357.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:52:37.546Z,1509454357.546 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:52:37.867Z,1509454357.867 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0352.lzma.bak
2017-10-31T12:52:37.867Z,1509454357.867 [DataOverHttps](INFO): SBD MOMSN=5178962
2017-10-31T12:52:37.908Z,1509454357.908 [PNI_TCM](ERROR): CRC does not match. Expected:0x32725 got:0x49152
2017-10-31T12:52:42.809Z,1509454362.809 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T12:52:42.809Z,1509454362.809 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T12:52:42.863Z,1509454362.863 [PNI_TCM](ERROR): CRC does not match. Expected:0x14459 got:0x10520
2017-10-31T12:52:42.864Z,1509454362.864 [PNI_TCM](ERROR): CRC does not match. Expected:0x8997 got:0x9496
2017-10-31T12:52:42.864Z,1509454362.864 [PNI_TCM](ERROR): CRC does not match. Expected:0x60937 got:0x46872
2017-10-31T12:52:42.864Z,1509454362.864 [PNI_TCM](ERROR): CRC does not match. Expected:0x50976 got:0x32024
2017-10-31T12:52:42.865Z,1509454362.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x50162 got:0x56600
2017-10-31T12:52:42.865Z,1509454362.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x30207 got:0x40984
2017-10-31T12:52:42.866Z,1509454362.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x29278 got:0x52248
2017-10-31T12:52:42.866Z,1509454362.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x30616 got:0x50456
2017-10-31T12:52:42.866Z,1509454362.866 [PNI_TCM](ERROR): CRC does not match. Expected:0x12633 got:0x34584
2017-10-31T12:52:42.867Z,1509454362.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x1841 got:0x50200
2017-10-31T12:52:48.275Z,1509454368.275 [DataOverHttps](INFO): Sending 677 bytes from file Logs/20171030T210256/Express0353.lzma
2017-10-31T12:52:49.080Z,1509454369.080 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0353.lzma.bak
2017-10-31T12:52:49.080Z,1509454369.080 [DataOverHttps](INFO): SBD MOMSN=5178965
2017-10-31T12:52:49.560Z,1509454369.560 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T12:52:49.560Z,1509454369.560 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T12:52:49.560Z,1509454369.560 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T12:52:53.262Z,1509454373.262 [PNI_TCM](ERROR): CRC does not match. Expected:0x11532 got:0x42944
2017-10-31T12:52:53.262Z,1509454373.262 [PNI_TCM](ERROR): CRC does not match. Expected:0x54000 got:0x43136
2017-10-31T12:52:53.263Z,1509454373.263 [PNI_TCM](ERROR): CRC does not match. Expected:0x37218 got:0x43008
2017-10-31T12:52:53.263Z,1509454373.263 [PNI_TCM](ERROR): CRC does not match. Expected:0x56761 got:0x42944
2017-10-31T12:52:53.263Z,1509454373.263 [PNI_TCM](ERROR): CRC does not match. Expected:0x52991 got:0x43008
2017-10-31T12:52:53.264Z,1509454373.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x10876 got:0x42944
2017-10-31T12:52:53.264Z,1509454373.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x52058 got:0x43136
2017-10-31T12:52:53.265Z,1509454373.265 [PNI_TCM](ERROR): CRC does not match. Expected:0x27478 got:0x43200
2017-10-31T12:52:56.365Z,1509454376.365 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002701
CHAN A1 (24V): -0.004538
CHAN A2 (12V): -0.001880
CHAN A3 (5V): 0.000244
CHAN B0 (3.3V): 0.000191
CHAN B1 (3.15aV): -0.000084
CHAN B2 (3.15bV): 0.000117
CHAN B3 (GND): -0.000548
OPEN: -0.000498
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:53:13.458Z,1509454393.458 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T12:53:13.459Z,1509454393.459 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T12:53:19.897Z,1509454399.897 [PNI_TCM](ERROR): CRC does not match. Expected:0x60894 got:0x13520
2017-10-31T12:53:35.161Z,1509454415.161 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T12:53:35.906Z,1509454415.906 [PNI_TCM](ERROR): CRC does not match. Expected:0x25731 got:0x5383
2017-10-31T12:53:39.459Z,1509454419.459 [NAL9602](INFO): SBD MO Status=2, MOMSN=3324, MT Status=2, MTMSN=0
2017-10-31T12:53:39.460Z,1509454419.460 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T12:54:05.717Z,1509454445.717 [NAL9602](INFO): SBD MO Status=0, MOMSN=3324, MT Status=0, MTMSN=0
2017-10-31T12:54:05.717Z,1509454445.717 [NAL9602](INFO): No messages in MT queue
2017-10-31T12:54:05.717Z,1509454445.717 [NAL9602](INFO): Failure count cleared after critical for NAL9602
2017-10-31T12:54:26.607Z,1509454466.607 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:54:36.121Z,1509454476.121 [NAL9602](INFO): Powering down
2017-10-31T12:54:37.414Z,1509454477.414 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002820
CHAN A1 (24V): -0.004569
CHAN A2 (12V): -0.002429
CHAN A3 (5V): 0.000297
CHAN B0 (3.3V): -0.000195
CHAN B1 (3.15aV): -0.000311
CHAN B2 (3.15bV): -0.000370
CHAN B3 (GND): 0.000335
OPEN: -0.000120
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:54:58.336Z,1509454498.336 [PNI_TCM](ERROR): CRC does not match. Expected:0x33254 got:0x45680
2017-10-31T12:55:07.936Z,1509454507.936 [PNI_TCM](ERROR): CRC does not match. Expected:0x44680 got:0x1857
2017-10-31T12:55:30.317Z,1509454530.317 [PNI_TCM](ERROR): CRC does not match. Expected:0x8550 got:0x7490
2017-10-31T12:55:33.515Z,1509454533.515 [PNI_TCM](ERROR): CRC does not match. Expected:0x57422 got:0x45610
2017-10-31T12:55:35.115Z,1509454535.115 [PNI_TCM](ERROR): CRC does not match. Expected:0x60800 got:0x1061
2017-10-31T12:55:37.940Z,1509454537.940 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:55:37.940Z,1509454537.940 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T12:55:37.940Z,1509454537.940 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:55:37.965Z,1509454537.965 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:55:38.363Z,1509454538.363 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:55:38.363Z,1509454538.363 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T12:55:38.743Z,1509454538.743 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:55:38.743Z,1509454538.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:55:38.743Z,1509454538.743 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:55:43.126Z,1509454543.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x45217 got:0x17518
2017-10-31T12:56:07.749Z,1509454567.749 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:56:18.518Z,1509454578.518 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134647
CHAN A1 (24V): -0.004188
CHAN A2 (12V): -0.002115
CHAN A3 (5V): 0.000400
CHAN B0 (3.3V): -0.000115
CHAN B1 (3.15aV): 0.000393
CHAN B2 (3.15bV): -0.000937
CHAN B3 (GND): -0.000229
OPEN: -0.000532
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:57:48.682Z,1509454668.682 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:57:50.319Z,1509454670.319 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T12:57:50.319Z,1509454670.319 [Default:CheckIn:C.Wait] Stopped
2017-10-31T12:57:50.319Z,1509454670.319 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T12:57:50.320Z,1509454670.320 [Default:CheckIn:D] Running Loop=1
2017-10-31T12:57:50.653Z,1509454670.653 [Default:CheckIn:D] Stopped
2017-10-31T12:57:50.653Z,1509454670.653 [Default:CheckIn:E] Running Loop=1
2017-10-31T12:57:51.064Z,1509454671.064 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 860.715625 min 
2017-10-31T12:57:51.065Z,1509454671.065 [Default:CheckIn:E] Stopped
2017-10-31T12:57:51.065Z,1509454671.065 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T12:57:51.065Z,1509454671.065 [Default:CheckIn] Stopped
2017-10-31T12:57:51.065Z,1509454671.065 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T12:57:51.065Z,1509454671.065 [Default:CheckIn](INFO): Running loop #80
2017-10-31T12:57:51.065Z,1509454671.065 [Default:CheckIn] Running Loop=80
2017-10-31T12:57:51.065Z,1509454671.065 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T12:57:51.066Z,1509454671.066 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T12:57:54.748Z,1509454674.748 [NAL9602](INFO): Powering up
2017-10-31T12:58:01.782Z,1509454681.782 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003473
CHAN A1 (24V): -0.003556
CHAN A2 (12V): -0.002145
CHAN A3 (5V): 0.000050
CHAN B0 (3.3V): -0.000177
CHAN B1 (3.15aV): 0.000122
CHAN B2 (3.15bV): -0.000370
CHAN B3 (GND): 0.000088
OPEN: -0.000229
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:58:05.711Z,1509454685.711 [NAL9602](INFO): NAL9602 initialized
2017-10-31T12:58:38.957Z,1509454718.957 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T12:58:38.957Z,1509454718.957 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T12:58:38.957Z,1509454718.957 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T12:58:38.971Z,1509454718.971 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T12:58:39.375Z,1509454719.375 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T12:58:39.375Z,1509454719.375 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T12:58:39.764Z,1509454719.764 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T12:58:39.765Z,1509454719.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T12:58:39.765Z,1509454719.765 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T12:59:32.145Z,1509454772.145 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T12:59:42.938Z,1509454782.938 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134659
CHAN A1 (24V): -0.003994
CHAN A2 (12V): -0.002064
CHAN A3 (5V): -0.000052
CHAN B0 (3.3V): -0.000448
CHAN B1 (3.15aV): -0.000013
CHAN B2 (3.15bV): 0.000075
CHAN B3 (GND): -0.000315
OPEN: -0.000161
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T12:59:59.524Z,1509454799.524 [PNI_TCM](ERROR): CRC does not match. Expected:0x1528 got:0x6978
2017-10-31T13:00:03.484Z,1509454803.484 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:00:03.485Z,1509454803.485 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:00:03.937Z,1509454803.937 [PNI_TCM](ERROR): CRC does not match. Expected:0x1682 got:0x45997
2017-10-31T13:00:07.126Z,1509454807.126 [PNI_TCM](ERROR): CRC does not match. Expected:0x37176 got:0x34564
2017-10-31T13:00:09.121Z,1509454809.121 [PNI_TCM](ERROR): CRC does not match. Expected:0x9954 got:0x2898
2017-10-31T13:00:16.725Z,1509454816.725 [PNI_TCM](ERROR): CRC does not match. Expected:0x53274 got:0x49074
2017-10-31T13:00:23.122Z,1509454823.122 [PNI_TCM](ERROR): CRC does not match. Expected:0x45001 got:0x16541
2017-10-31T13:00:24.731Z,1509454824.731 [PNI_TCM](ERROR): CRC does not match. Expected:0x47928 got:0x52507
2017-10-31T13:00:36.732Z,1509454836.732 [PNI_TCM](ERROR): CRC does not match. Expected:0x35043 got:0x219
2017-10-31T13:00:39.512Z,1509454839.512 [PNI_TCM](ERROR): CRC does not match. Expected:0x44733 got:0x26033
2017-10-31T13:00:51.933Z,1509454851.933 [PNI_TCM](ERROR): CRC does not match. Expected:0x12836 got:0x43136
2017-10-31T13:01:13.055Z,1509454873.055 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:01:21.799Z,1509454881.799 [BPC1](ERROR): Failed to parse message.
2017-10-31T13:01:21.799Z,1509454881.799 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T13:01:21.799Z,1509454881.799 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:01:21.799Z,1509454881.799 [BPC1](ERROR): Data Fault
2017-10-31T13:01:21.848Z,1509454881.848 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:01:23.048Z,1509454883.048 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:01:23.048Z,1509454883.048 [BPC1] No Fault, FailCount= 1
2017-10-31T13:01:23.835Z,1509454883.835 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003047
CHAN A1 (24V): -0.004203
CHAN A2 (12V): -0.002157
CHAN A3 (5V): -0.000335
CHAN B0 (3.3V): 0.000391
CHAN B1 (3.15aV): -0.000647
CHAN B2 (3.15bV): -0.000388
CHAN B3 (GND): -0.000042
OPEN: -0.000359
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:01:39.814Z,1509454899.814 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:01:39.814Z,1509454899.815 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T13:01:39.814Z,1509454899.815 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:01:39.856Z,1509454899.856 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:01:40.241Z,1509454900.241 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:01:40.241Z,1509454900.241 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T13:01:40.629Z,1509454900.629 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:01:40.630Z,1509454900.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:01:40.630Z,1509454900.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:02:02.625Z,1509454922.625 [BPC1](ERROR): Failed to parse message.
2017-10-31T13:02:02.625Z,1509454922.625 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T13:02:02.625Z,1509454922.625 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:02:02.625Z,1509454922.625 [BPC1](ERROR): Data Fault
2017-10-31T13:02:02.648Z,1509454922.648 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:02:03.849Z,1509454923.849 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:02:03.849Z,1509454923.849 [BPC1] No Fault, FailCount= 1
2017-10-31T13:02:09.386Z,1509454929.386 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:02:09.386Z,1509454929.386 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:02:26.617Z,1509454946.617 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:02:26.618Z,1509454946.618 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:02:38.623Z,1509454958.623 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T13:02:38.624Z,1509454958.624 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:02:38.624Z,1509454958.624 [BPC1](ERROR): Data Fault
2017-10-31T13:02:38.646Z,1509454958.646 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:02:39.855Z,1509454959.855 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:02:39.855Z,1509454959.855 [BPC1] No Fault, FailCount= 1
2017-10-31T13:02:50.992Z,1509454970.992 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:02:50.992Z,1509454970.992 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:02:51.443Z,1509454971.443 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T12:57:51.1Z
2017-10-31T13:02:51.444Z,1509454971.444 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T13:02:51.444Z,1509454971.444 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T13:02:55.551Z,1509454975.551 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:02:55.969Z,1509454975.969 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0356.lzma
2017-10-31T13:02:56.765Z,1509454976.765 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0356.lzma.bak
2017-10-31T13:02:56.765Z,1509454976.765 [DataOverHttps](INFO): SBD MOMSN=5178984
2017-10-31T13:03:06.377Z,1509454986.377 [DataOverHttps](INFO): Sending 544 bytes from file Logs/20171030T210256/Express0357.lzma
2017-10-31T13:03:07.182Z,1509454987.182 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0357.lzma.bak
2017-10-31T13:03:07.182Z,1509454987.182 [DataOverHttps](INFO): SBD MOMSN=5178986
2017-10-31T13:03:07.654Z,1509454987.654 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T13:03:07.655Z,1509454987.655 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T13:03:07.655Z,1509454987.655 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T13:03:12.658Z,1509454992.658 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:03:12.658Z,1509454992.658 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:03:13.047Z,1509454993.047 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T13:03:14.329Z,1509454994.329 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002634
CHAN A1 (24V): -0.004230
CHAN A2 (12V): -0.002536
CHAN A3 (5V): 0.000089
CHAN B0 (3.3V): -0.000642
CHAN B1 (3.15aV): -0.000042
CHAN B2 (3.15bV): -0.000343
CHAN B3 (GND): -0.000129
OPEN: -0.000421
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:03:35.530Z,1509455015.530 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T13:03:43.854Z,1509455023.854 [NAL9602](INFO): Powering down
2017-10-31T13:04:40.894Z,1509455080.894 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:04:40.894Z,1509455080.894 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T13:04:40.894Z,1509455080.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:04:40.907Z,1509455080.907 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:04:41.307Z,1509455081.307 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:04:41.307Z,1509455081.307 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T13:04:41.673Z,1509455081.673 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:04:41.674Z,1509455081.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:04:41.674Z,1509455081.674 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:04:44.517Z,1509455084.517 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:04:55.353Z,1509455095.353 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003702
CHAN A1 (24V): -0.003526
CHAN A2 (12V): -0.002494
CHAN A3 (5V): -0.000035
CHAN B0 (3.3V): 0.000261
CHAN B1 (3.15aV): 0.000837
CHAN B2 (3.15bV): -0.000178
CHAN B3 (GND): 0.000049
OPEN: -0.000262
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:06:25.585Z,1509455185.585 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:06:36.144Z,1509455196.144 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134512
CHAN A1 (24V): -0.004212
CHAN A2 (12V): -0.002318
CHAN A3 (5V): 0.000336
CHAN B0 (3.3V): -0.000199
CHAN B1 (3.15aV): -0.000055
CHAN B2 (3.15bV): -0.000266
CHAN B3 (GND): 0.000103
OPEN: -0.000306
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:07:42.037Z,1509455262.037 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:07:42.049Z,1509455262.049 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T13:07:42.049Z,1509455262.049 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:07:42.079Z,1509455262.079 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:07:42.434Z,1509455262.434 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:07:42.434Z,1509455262.434 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T13:07:42.833Z,1509455262.833 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:07:42.834Z,1509455262.834 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:07:42.834Z,1509455262.834 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:08:06.460Z,1509455286.460 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:08:08.417Z,1509455288.417 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T13:08:08.417Z,1509455288.417 [Default:CheckIn:C.Wait] Stopped
2017-10-31T13:08:08.417Z,1509455288.417 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T13:08:08.417Z,1509455288.417 [Default:CheckIn:D] Running Loop=1
2017-10-31T13:08:08.822Z,1509455288.822 [Default:CheckIn:D] Stopped
2017-10-31T13:08:08.823Z,1509455288.823 [Default:CheckIn:E] Running Loop=1
2017-10-31T13:08:09.222Z,1509455289.222 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 871.018490 min 
2017-10-31T13:08:09.222Z,1509455289.222 [Default:CheckIn:E] Stopped
2017-10-31T13:08:09.223Z,1509455289.223 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T13:08:09.223Z,1509455289.223 [Default:CheckIn] Stopped
2017-10-31T13:08:09.223Z,1509455289.223 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T13:08:09.223Z,1509455289.223 [Default:CheckIn](INFO): Running loop #81
2017-10-31T13:08:09.223Z,1509455289.223 [Default:CheckIn] Running Loop=81
2017-10-31T13:08:09.223Z,1509455289.223 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T13:08:09.223Z,1509455289.223 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T13:08:12.713Z,1509455292.713 [NAL9602](INFO): Powering up
2017-10-31T13:08:15.144Z,1509455295.144 [PNI_TCM](ERROR): CRC does not match. Expected:0x45598 got:0x16938
2017-10-31T13:08:19.671Z,1509455299.671 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002984
CHAN A1 (24V): -0.004392
CHAN A2 (12V): -0.002406
CHAN A3 (5V): -0.000109
CHAN B0 (3.3V): 0.000355
CHAN B1 (3.15aV): 0.000383
CHAN B2 (3.15bV): -0.000049
CHAN B3 (GND): -0.000342
OPEN: -0.000518
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:08:21.553Z,1509455301.553 [PNI_TCM](ERROR): CRC does not match. Expected:0x47324 got:0x3
2017-10-31T13:08:23.525Z,1509455303.525 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:08:24.319Z,1509455304.319 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T13:08:24.319Z,1509455304.319 [NAL9602] Data Fault, FailCount= 1
2017-10-31T13:08:24.319Z,1509455304.319 [NAL9602](ERROR): Data Fault
2017-10-31T13:08:24.413Z,1509455304.413 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T13:08:24.722Z,1509455304.722 [NAL9602](INFO): Powering down
2017-10-31T13:08:25.587Z,1509455305.587 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T13:08:25.587Z,1509455305.587 [NAL9602] No Fault, FailCount= 1
2017-10-31T13:08:54.723Z,1509455334.723 [NAL9602](INFO): Powering up NAL9602
2017-10-31T13:09:03.150Z,1509455343.150 [PNI_TCM](ERROR): CRC does not match. Expected:0x26768 got:0x7175
2017-10-31T13:09:05.921Z,1509455345.921 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:09:49.976Z,1509455389.976 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:09:51.903Z,1509455391.903 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:09:51.903Z,1509455391.903 [BPC1] Communications Fault, FailCount= 1
2017-10-31T13:09:51.903Z,1509455391.903 [BPC1](ERROR): Communications Fault
2017-10-31T13:09:51.959Z,1509455391.959 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:09:53.150Z,1509455393.150 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:09:53.150Z,1509455393.150 [BPC1] No Fault, FailCount= 1
2017-10-31T13:10:00.761Z,1509455400.761 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002844
CHAN A1 (24V): -0.004060
CHAN A2 (12V): -0.002157
CHAN A3 (5V): -0.000247
CHAN B0 (3.3V): -0.000177
CHAN B1 (3.15aV): 0.000013
CHAN B2 (3.15bV): 0.000043
CHAN B3 (GND): 0.000188
OPEN: -0.000245
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:10:42.945Z,1509455442.945 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:10:42.945Z,1509455442.945 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T13:10:42.945Z,1509455442.945 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:10:42.958Z,1509455442.958 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:10:43.376Z,1509455443.376 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:10:43.376Z,1509455443.376 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T13:10:43.747Z,1509455443.747 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:10:43.748Z,1509455443.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:10:43.748Z,1509455443.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:10:56.503Z,1509455456.503 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:10:56.503Z,1509455456.503 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:10:56.947Z,1509455456.947 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T13:10:56.948Z,1509455456.948 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:10:56.948Z,1509455456.948 [BPC1](ERROR): Data Fault
2017-10-31T13:10:56.998Z,1509455456.998 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:10:58.203Z,1509455458.203 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:10:58.203Z,1509455458.203 [BPC1] No Fault, FailCount= 1
2017-10-31T13:11:18.250Z,1509455478.250 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:11:18.250Z,1509455478.250 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:11:22.283Z,1509455482.283 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:11:22.283Z,1509455482.283 [BPC1] Communications Fault, FailCount= 2
2017-10-31T13:11:22.283Z,1509455482.283 [BPC1](ERROR): Communications Fault
2017-10-31T13:11:22.306Z,1509455482.306 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:11:23.526Z,1509455483.526 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:11:23.526Z,1509455483.526 [BPC1] No Fault, FailCount= 2
2017-10-31T13:11:31.119Z,1509455491.119 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:11:41.938Z,1509455501.938 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002721
CHAN A1 (24V): -0.003811
CHAN A2 (12V): -0.002557
CHAN A3 (5V): 0.000377
CHAN B0 (3.3V): 0.000143
CHAN B1 (3.15aV): -0.000761
CHAN B2 (3.15bV): 0.000187
CHAN B3 (GND): -0.000472
OPEN: -0.000279
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:11:57.051Z,1509455517.051 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:11:57.051Z,1509455517.051 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:12:02.692Z,1509455522.692 [BPC1](ERROR): Failed to parse message.
2017-10-31T13:12:02.692Z,1509455522.692 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T13:12:02.692Z,1509455522.692 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:12:02.692Z,1509455522.692 [BPC1](ERROR): Data Fault
2017-10-31T13:12:02.716Z,1509455522.716 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:12:03.921Z,1509455523.921 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:12:03.921Z,1509455523.921 [BPC1] No Fault, FailCount= 1
2017-10-31T13:12:13.717Z,1509455533.717 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:12:13.717Z,1509455533.717 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:12:42.663Z,1509455562.663 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:12:42.663Z,1509455562.663 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:13:07.484Z,1509455587.484 [BPC1](ERROR): Failed to parse message.
2017-10-31T13:13:07.484Z,1509455587.484 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T13:13:07.484Z,1509455587.484 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:13:07.484Z,1509455587.484 [BPC1](ERROR): Data Fault
2017-10-31T13:13:07.528Z,1509455587.528 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:13:08.730Z,1509455588.730 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:13:08.730Z,1509455588.730 [BPC1] No Fault, FailCount= 1
2017-10-31T13:13:09.500Z,1509455589.500 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T13:08:09.2Z
2017-10-31T13:13:09.501Z,1509455589.501 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T13:13:09.501Z,1509455589.501 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T13:13:13.572Z,1509455593.572 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:13:13.998Z,1509455593.998 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0360.lzma
2017-10-31T13:13:14.786Z,1509455594.786 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0360.lzma.bak
2017-10-31T13:13:14.786Z,1509455594.786 [DataOverHttps](INFO): SBD MOMSN=5179001
2017-10-31T13:13:24.147Z,1509455604.147 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:13:24.147Z,1509455604.147 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:13:24.310Z,1509455604.310 [DataOverHttps](INFO): Sending 647 bytes from file Logs/20171030T210256/Express0361.lzma
2017-10-31T13:13:25.115Z,1509455605.115 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0361.lzma.bak
2017-10-31T13:13:25.115Z,1509455605.115 [DataOverHttps](INFO): SBD MOMSN=5179003
2017-10-31T13:13:25.598Z,1509455605.598 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T13:13:25.598Z,1509455605.598 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T13:13:25.598Z,1509455605.598 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T13:13:32.308Z,1509455612.308 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133565
CHAN A1 (24V): -0.004660
CHAN A2 (12V): -0.002291
CHAN A3 (5V): 0.000171
CHAN B0 (3.3V): 0.000131
CHAN B1 (3.15aV): -0.000008
CHAN B2 (3.15bV): -0.000201
CHAN B3 (GND): -0.000513
OPEN: -0.000457
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:13:35.885Z,1509455615.885 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T13:13:43.872Z,1509455623.872 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:13:43.872Z,1509455623.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T13:13:43.872Z,1509455623.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:13:43.901Z,1509455623.901 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:13:44.275Z,1509455624.275 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:13:44.275Z,1509455624.275 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T13:13:44.663Z,1509455624.663 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:13:44.664Z,1509455624.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:13:44.664Z,1509455624.664 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:13:55.868Z,1509455635.868 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:13:55.869Z,1509455635.869 [BPC1] Communications Fault, FailCount= 1
2017-10-31T13:13:55.869Z,1509455635.869 [BPC1](ERROR): Communications Fault
2017-10-31T13:13:55.934Z,1509455635.934 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:13:57.098Z,1509455637.098 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:13:57.098Z,1509455637.098 [BPC1] No Fault, FailCount= 1
2017-10-31T13:14:08.619Z,1509455648.619 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T13:14:39.266Z,1509455679.266 [NAL9602](INFO): Powering down
2017-10-31T13:15:02.525Z,1509455702.525 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:15:13.340Z,1509455713.340 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002871
CHAN A1 (24V): -0.004073
CHAN A2 (12V): -0.001976
CHAN A3 (5V): 0.000141
CHAN B0 (3.3V): 0.000087
CHAN B1 (3.15aV): 0.000133
CHAN B2 (3.15bV): -0.000104
CHAN B3 (GND): 0.000329
OPEN: -0.000642
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:16:43.629Z,1509455803.629 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:16:44.804Z,1509455804.804 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:16:44.804Z,1509455804.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T13:16:44.804Z,1509455804.804 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:16:44.818Z,1509455804.818 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:16:45.214Z,1509455805.214 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:16:45.214Z,1509455805.214 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T13:16:45.590Z,1509455805.590 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:16:45.590Z,1509455805.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:16:45.590Z,1509455805.590 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:16:54.426Z,1509455814.426 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134777
CHAN A1 (24V): -0.003262
CHAN A2 (12V): -0.002030
CHAN A3 (5V): 0.000038
CHAN B0 (3.3V): 0.000293
CHAN B1 (3.15aV): 0.000157
CHAN B2 (3.15bV): -0.000260
CHAN B3 (GND): -0.000019
OPEN: -0.000638
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:18:24.782Z,1509455904.782 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:18:26.303Z,1509455906.303 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T13:18:26.312Z,1509455906.312 [Default:CheckIn:C.Wait] Stopped
2017-10-31T13:18:26.312Z,1509455906.312 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T13:18:26.312Z,1509455906.312 [Default:CheckIn:D] Running Loop=1
2017-10-31T13:18:26.673Z,1509455906.673 [Default:CheckIn:D] Stopped
2017-10-31T13:18:26.673Z,1509455906.673 [Default:CheckIn:E] Running Loop=1
2017-10-31T13:18:27.168Z,1509455907.168 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 881.315951 min 
2017-10-31T13:18:27.169Z,1509455907.169 [Default:CheckIn:E] Stopped
2017-10-31T13:18:27.169Z,1509455907.169 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T13:18:27.169Z,1509455907.169 [Default:CheckIn] Stopped
2017-10-31T13:18:27.169Z,1509455907.169 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T13:18:27.169Z,1509455907.169 [Default:CheckIn](INFO): Running loop #82
2017-10-31T13:18:27.169Z,1509455907.169 [Default:CheckIn] Running Loop=82
2017-10-31T13:18:27.169Z,1509455907.169 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T13:18:27.170Z,1509455907.170 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T13:18:32.703Z,1509455912.703 [NAL9602](INFO): Powering up
2017-10-31T13:18:39.959Z,1509455919.959 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.001988
CHAN A1 (24V): -0.004727
CHAN A2 (12V): -0.001723
CHAN A3 (5V): 0.000080
CHAN B0 (3.3V): -0.000105
CHAN B1 (3.15aV): -0.000155
CHAN B2 (3.15bV): 0.000483
CHAN B3 (GND): -0.000533
OPEN: -0.000374
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:18:43.873Z,1509455923.873 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:19:15.860Z,1509455955.860 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T13:19:15.934Z,1509455955.934 [NAL9602](FAULT): received: 
+CSQ:0

OK25, 2, 0, 0, 0

OK
2017-10-31T13:19:15.934Z,1509455955.934 [NAL9602] Data Fault, FailCount= 2
2017-10-31T13:19:15.934Z,1509455955.934 [NAL9602](ERROR): Data Fault
2017-10-31T13:19:16.031Z,1509455956.031 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T13:19:16.260Z,1509455956.260 [NAL9602](INFO): Powering down
2017-10-31T13:19:17.131Z,1509455957.131 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T13:19:17.132Z,1509455957.132 [NAL9602] No Fault, FailCount= 2
2017-10-31T13:19:45.677Z,1509455985.677 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:19:45.677Z,1509455985.677 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T13:19:45.677Z,1509455985.677 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:19:45.691Z,1509455985.691 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:19:46.098Z,1509455986.098 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:19:46.098Z,1509455986.098 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T13:19:46.436Z,1509455986.436 [NAL9602](INFO): Powering up NAL9602
2017-10-31T13:19:46.498Z,1509455986.498 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:19:46.499Z,1509455986.499 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:19:46.499Z,1509455986.499 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:19:57.634Z,1509455997.634 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:19:58.435Z,1509455998.435 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T13:19:58.435Z,1509455998.435 [NAL9602] Data Fault, FailCount= 3
2017-10-31T13:19:58.435Z,1509455998.435 [NAL9602](ERROR): Data Fault
2017-10-31T13:19:58.526Z,1509455998.526 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T13:19:58.835Z,1509455998.835 [NAL9602](INFO): Powering down
2017-10-31T13:19:59.690Z,1509455999.690 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T13:19:59.690Z,1509455999.690 [NAL9602] No Fault, FailCount= 3
2017-10-31T13:20:10.107Z,1509456010.107 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:20:20.887Z,1509456020.887 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134534
CHAN A1 (24V): -0.003414
CHAN A2 (12V): -0.001626
CHAN A3 (5V): 0.000389
CHAN B0 (3.3V): 0.000029
CHAN B1 (3.15aV): 0.000063
CHAN B2 (3.15bV): -0.000099
CHAN B3 (GND): -0.000192
OPEN: -0.000162
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:20:30.906Z,1509456030.906 [NAL9602](INFO): Powering up NAL9602
2017-10-31T13:20:41.831Z,1509456041.831 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:21:10.226Z,1509456070.226 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:21:10.226Z,1509456070.226 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:21:17.469Z,1509456077.469 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:21:17.469Z,1509456077.469 [BPC1] Communications Fault, FailCount= 1
2017-10-31T13:21:17.469Z,1509456077.469 [BPC1](ERROR): Communications Fault
2017-10-31T13:21:17.493Z,1509456077.493 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:21:18.686Z,1509456078.686 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:21:18.686Z,1509456078.686 [BPC1] No Fault, FailCount= 1
2017-10-31T13:21:43.386Z,1509456103.386 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:21:43.387Z,1509456103.387 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:21:51.060Z,1509456111.060 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:22:01.899Z,1509456121.899 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003248
CHAN A1 (24V): -0.003885
CHAN A2 (12V): -0.002333
CHAN A3 (5V): -0.000082
CHAN B0 (3.3V): -0.000107
CHAN B1 (3.15aV): 0.000258
CHAN B2 (3.15bV): -0.000432
CHAN B3 (GND): 0.000196
OPEN: -0.000239
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:22:46.603Z,1509456166.603 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:22:46.604Z,1509456166.604 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T13:22:46.604Z,1509456166.604 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:22:46.657Z,1509456166.657 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:22:46.657Z,1509456166.657 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:23:27.449Z,1509456207.449 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T13:18:27.2Z
2017-10-31T13:23:27.449Z,1509456207.449 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T13:23:27.449Z,1509456207.449 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T13:23:31.943Z,1509456211.943 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0364.lzma
2017-10-31T13:23:32.017Z,1509456212.017 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:23:32.687Z,1509456212.687 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0364.lzma.bak
2017-10-31T13:23:32.688Z,1509456212.688 [DataOverHttps](INFO): SBD MOMSN=5179020
2017-10-31T13:23:37.111Z,1509456217.111 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T13:23:38.377Z,1509456218.377 [PNI_TCM](ERROR): CRC does not match. Expected:0x32926 got:0x7360
2017-10-31T13:23:42.265Z,1509456222.265 [DataOverHttps](INFO): Sending 734 bytes from file Logs/20171030T210256/Express0365.lzma
2017-10-31T13:23:43.068Z,1509456223.068 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0365.lzma.bak
2017-10-31T13:23:43.068Z,1509456223.068 [DataOverHttps](INFO): SBD MOMSN=5179022
2017-10-31T13:23:43.570Z,1509456223.570 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T13:23:43.570Z,1509456223.570 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T13:23:43.570Z,1509456223.570 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T13:23:50.181Z,1509456230.181 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133868
CHAN A1 (24V): -0.004606
CHAN A2 (12V): -0.001618
CHAN A3 (5V): 0.000239
CHAN B0 (3.3V): -0.000346
CHAN B1 (3.15aV): 0.000022
CHAN B2 (3.15bV): -0.000493
CHAN B3 (GND): -0.000188
OPEN: -0.000633
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:23:56.509Z,1509456236.509 [NAL9602](INFO): SBD MO Status=2, MOMSN=3325, MT Status=2, MTMSN=0
2017-10-31T13:23:56.509Z,1509456236.509 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:23:56.905Z,1509456236.905 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T13:24:27.326Z,1509456267.326 [NAL9602](INFO): Powering down
2017-10-31T13:25:20.347Z,1509456320.347 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:25:31.188Z,1509456331.188 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003907
CHAN A1 (24V): -0.002715
CHAN A2 (12V): -0.002212
CHAN A3 (5V): 0.000264
CHAN B0 (3.3V): 0.000044
CHAN B1 (3.15aV): -0.000704
CHAN B2 (3.15bV): 0.000164
CHAN B3 (GND): -0.000275
OPEN: -0.000162
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:27:01.425Z,1509456421.425 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:27:12.265Z,1509456432.265 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135154
CHAN A1 (24V): -0.003250
CHAN A2 (12V): -0.002068
CHAN A3 (5V): 0.000633
CHAN B0 (3.3V): -0.000254
CHAN B1 (3.15aV): 0.000127
CHAN B2 (3.15bV): -0.000446
CHAN B3 (GND): -0.000548
OPEN: -0.000676
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:27:54.369Z,1509456474.369 [PNI_TCM](ERROR): CRC does not match. Expected:0x62829 got:0x40429
2017-10-31T13:27:54.764Z,1509456474.764 [PNI_TCM](ERROR): CRC does not match. Expected:0x19267 got:0x6591
2017-10-31T13:27:55.161Z,1509456475.161 [PNI_TCM](ERROR): CRC does not match. Expected:0x28294 got:0x16808
2017-10-31T13:28:25.559Z,1509456505.559 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T13:28:42.406Z,1509456522.406 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:28:43.993Z,1509456523.993 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T13:28:43.993Z,1509456523.993 [Default:CheckIn:C.Wait] Stopped
2017-10-31T13:28:43.994Z,1509456523.994 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T13:28:43.994Z,1509456523.994 [Default:CheckIn:D] Running Loop=1
2017-10-31T13:28:44.386Z,1509456524.386 [Default:CheckIn:D] Stopped
2017-10-31T13:28:44.386Z,1509456524.386 [Default:CheckIn:E] Running Loop=1
2017-10-31T13:28:44.785Z,1509456524.785 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 891.611198 min 
2017-10-31T13:28:44.786Z,1509456524.786 [Default:CheckIn:E] Stopped
2017-10-31T13:28:44.786Z,1509456524.786 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T13:28:44.786Z,1509456524.786 [Default:CheckIn] Stopped
2017-10-31T13:28:44.786Z,1509456524.786 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T13:28:44.786Z,1509456524.786 [Default:CheckIn](INFO): Running loop #83
2017-10-31T13:28:44.786Z,1509456524.786 [Default:CheckIn] Running Loop=83
2017-10-31T13:28:44.786Z,1509456524.786 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T13:28:44.786Z,1509456524.786 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T13:28:48.407Z,1509456528.407 [NAL9602](INFO): Powering up
2017-10-31T13:28:55.508Z,1509456535.508 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003198
CHAN A1 (24V): -0.003929
CHAN A2 (12V): -0.002068
CHAN A3 (5V): 0.000441
CHAN B0 (3.3V): -0.000012
CHAN B1 (3.15aV): -0.000073
CHAN B2 (3.15bV): -0.000332
CHAN B3 (GND): 0.000232
OPEN: -0.000312
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:28:59.469Z,1509456539.469 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:29:13.883Z,1509456553.883 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:29:13.883Z,1509456553.883 [BPC1] Communications Fault, FailCount= 1
2017-10-31T13:29:13.883Z,1509456553.883 [BPC1](ERROR): Communications Fault
2017-10-31T13:29:13.907Z,1509456553.907 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:29:15.108Z,1509456555.108 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:29:15.108Z,1509456555.108 [BPC1] No Fault, FailCount= 1
2017-10-31T13:29:26.250Z,1509456566.250 [NAL9602](INFO): SBD MO Status=0, MOMSN=3325, MT Status=0, MTMSN=0
2017-10-31T13:29:26.250Z,1509456566.250 [NAL9602](INFO): No messages in MT queue
2017-10-31T13:30:25.880Z,1509456625.880 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:30:36.653Z,1509456636.653 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133457
CHAN A1 (24V): -0.004600
CHAN A2 (12V): -0.001761
CHAN A3 (5V): 0.000815
CHAN B0 (3.3V): 0.000260
CHAN B1 (3.15aV): -0.000338
CHAN B2 (3.15bV): -0.000531
CHAN B3 (GND): 0.000067
OPEN: -0.000438
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:30:42.966Z,1509456642.966 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T13:30:42.966Z,1509456642.966 [NAL9602] Data Fault, FailCount= 1
2017-10-31T13:30:42.966Z,1509456642.966 [NAL9602](ERROR): Data Fault
2017-10-31T13:30:43.052Z,1509456643.052 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T13:30:43.363Z,1509456643.363 [NAL9602](INFO): Powering down
2017-10-31T13:30:43.790Z,1509456643.790 [BPC1](ERROR): Failed to parse message.
2017-10-31T13:30:43.790Z,1509456643.790 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T13:30:43.790Z,1509456643.790 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:30:43.790Z,1509456643.790 [BPC1](ERROR): Data Fault
2017-10-31T13:30:43.824Z,1509456643.824 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:30:44.239Z,1509456644.239 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T13:30:44.239Z,1509456644.239 [NAL9602] No Fault, FailCount= 1
2017-10-31T13:30:45.045Z,1509456645.045 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:30:45.045Z,1509456645.045 [BPC1] No Fault, FailCount= 1
2017-10-31T13:31:08.957Z,1509456668.957 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:31:08.957Z,1509456668.957 [BPC1] Communications Fault, FailCount= 2
2017-10-31T13:31:08.957Z,1509456668.957 [BPC1](ERROR): Communications Fault
2017-10-31T13:31:08.981Z,1509456668.981 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:31:10.183Z,1509456670.183 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:31:10.183Z,1509456670.183 [BPC1] No Fault, FailCount= 2
2017-10-31T13:31:13.726Z,1509456673.726 [NAL9602](INFO): Powering up NAL9602
2017-10-31T13:31:24.924Z,1509456684.924 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:32:06.747Z,1509456726.747 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:32:17.546Z,1509456737.546 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002885
CHAN A1 (24V): -0.004133
CHAN A2 (12V): -0.002500
CHAN A3 (5V): 0.000336
CHAN B0 (3.3V): 0.000154
CHAN B1 (3.15aV): -0.000128
CHAN B2 (3.15bV): -0.000649
CHAN B3 (GND): -0.000347
OPEN: -0.000410
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:33:37.316Z,1509456817.316 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T13:33:44.907Z,1509456824.907 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T13:28:44.8Z
2017-10-31T13:33:44.907Z,1509456824.907 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T13:33:44.907Z,1509456824.907 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T13:33:49.587Z,1509456829.587 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:33:49.672Z,1509456829.672 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0368.lzma
2017-10-31T13:33:50.437Z,1509456830.437 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0368.lzma.bak
2017-10-31T13:33:50.438Z,1509456830.438 [DataOverHttps](INFO): SBD MOMSN=5179042
2017-10-31T13:33:59.802Z,1509456839.802 [DataOverHttps](INFO): Sending 652 bytes from file Logs/20171030T210256/Express0369.lzma
2017-10-31T13:34:00.601Z,1509456840.601 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0369.lzma.bak
2017-10-31T13:34:00.601Z,1509456840.601 [DataOverHttps](INFO): SBD MOMSN=5179044
2017-10-31T13:34:01.077Z,1509456841.077 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T13:34:01.077Z,1509456841.077 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T13:34:01.077Z,1509456841.077 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T13:34:05.911Z,1509456845.911 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T13:34:05.911Z,1509456845.911 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:34:05.911Z,1509456845.911 [BPC1](ERROR): Data Fault
2017-10-31T13:34:05.938Z,1509456845.938 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:34:07.151Z,1509456847.151 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:34:07.151Z,1509456847.151 [BPC1] No Fault, FailCount= 1
2017-10-31T13:34:07.947Z,1509456847.947 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133760
CHAN A1 (24V): -0.004585
CHAN A2 (12V): -0.002091
CHAN A3 (5V): 0.000524
CHAN B0 (3.3V): -0.000254
CHAN B1 (3.15aV): -0.000337
CHAN B2 (3.15bV): -0.000349
CHAN B3 (GND): -0.000153
OPEN: -0.000282
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:34:15.462Z,1509456855.462 [NAL9602](INFO): Powering down
2017-10-31T13:35:38.110Z,1509456938.110 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:35:48.899Z,1509456948.899 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134793
CHAN A1 (24V): -0.003146
CHAN A2 (12V): -0.001800
CHAN A3 (5V): 0.000174
CHAN B0 (3.3V): 0.000294
CHAN B1 (3.15aV): 0.000105
CHAN B2 (3.15bV): -0.000276
CHAN B3 (GND): -0.000091
OPEN: -0.000574
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:37:18.996Z,1509457038.996 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:37:29.784Z,1509457049.784 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004039
CHAN A1 (24V): -0.003382
CHAN A2 (12V): -0.002377
CHAN A3 (5V): 0.000453
CHAN B0 (3.3V): -0.000207
CHAN B1 (3.15aV): -0.000569
CHAN B2 (3.15bV): -0.000275
CHAN B3 (GND): 0.000373
OPEN: -0.000671
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:37:46.984Z,1509457066.984 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:37:46.985Z,1509457066.985 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T13:37:47.372Z,1509457067.372 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:37:47.373Z,1509457067.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:37:47.373Z,1509457067.373 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:38:59.807Z,1509457139.807 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:39:01.746Z,1509457141.746 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T13:39:01.746Z,1509457141.746 [Default:CheckIn:C.Wait] Stopped
2017-10-31T13:39:01.747Z,1509457141.747 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T13:39:01.747Z,1509457141.747 [Default:CheckIn:D] Running Loop=1
2017-10-31T13:39:02.155Z,1509457142.155 [Default:CheckIn:D] Stopped
2017-10-31T13:39:02.155Z,1509457142.155 [Default:CheckIn:E] Running Loop=1
2017-10-31T13:39:02.542Z,1509457142.542 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 901.907357 min 
2017-10-31T13:39:02.542Z,1509457142.542 [Default:CheckIn:E] Stopped
2017-10-31T13:39:02.543Z,1509457142.543 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T13:39:02.543Z,1509457142.543 [Default:CheckIn] Stopped
2017-10-31T13:39:02.543Z,1509457142.543 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T13:39:02.543Z,1509457142.543 [Default:CheckIn](INFO): Running loop #84
2017-10-31T13:39:02.543Z,1509457142.543 [Default:CheckIn] Running Loop=84
2017-10-31T13:39:02.543Z,1509457142.543 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T13:39:02.543Z,1509457142.543 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T13:39:05.996Z,1509457145.996 [NAL9602](INFO): Powering up
2017-10-31T13:39:12.865Z,1509457152.865 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133826
CHAN A1 (24V): -0.004230
CHAN A2 (12V): -0.001907
CHAN A3 (5V): -0.000155
CHAN B0 (3.3V): -0.000006
CHAN B1 (3.15aV): 0.000002
CHAN B2 (3.15bV): -0.000338
CHAN B3 (GND): -0.000036
OPEN: -0.000095
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:39:16.811Z,1509457156.811 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:40:07.206Z,1509457207.206 [PNI_TCM](ERROR): CRC does not match. Expected:0x16749 got:0x16541
2017-10-31T13:40:10.791Z,1509457210.791 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T13:40:13.599Z,1509457213.599 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T13:40:14.406Z,1509457214.406 [PNI_TCM](ERROR): CRC does not match. Expected:0x11528 got:0x16384
2017-10-31T13:40:18.412Z,1509457218.412 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T13:40:28.414Z,1509457228.414 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T13:40:28.414Z,1509457228.414 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:40:28.414Z,1509457228.414 [BPC1](ERROR): Data Fault
2017-10-31T13:40:28.443Z,1509457228.443 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:40:29.643Z,1509457229.643 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:40:29.643Z,1509457229.643 [BPC1] No Fault, FailCount= 1
2017-10-31T13:40:42.802Z,1509457242.802 [PNI_TCM](ERROR): CRC does not match. Expected:0x43927 got:0x6335
2017-10-31T13:40:43.266Z,1509457243.266 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:40:47.660Z,1509457247.660 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:40:47.660Z,1509457247.660 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T13:40:47.660Z,1509457247.660 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:40:47.674Z,1509457247.674 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:40:48.040Z,1509457248.040 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:40:48.040Z,1509457248.040 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T13:40:48.432Z,1509457248.432 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:40:48.432Z,1509457248.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:40:48.433Z,1509457248.433 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:40:53.597Z,1509457253.597 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:40:53.597Z,1509457253.597 [BPC1] Communications Fault, FailCount= 2
2017-10-31T13:40:53.597Z,1509457253.597 [BPC1](ERROR): Communications Fault
2017-10-31T13:40:53.673Z,1509457253.673 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:40:54.067Z,1509457254.067 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002753
CHAN A1 (24V): -0.003688
CHAN A2 (12V): -0.002129
CHAN A3 (5V): 0.000370
CHAN B0 (3.3V): -0.000519
CHAN B1 (3.15aV): -0.000148
CHAN B2 (3.15bV): -0.000307
CHAN B3 (GND): 0.000582
OPEN: -0.000473
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:40:54.851Z,1509457254.851 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:40:54.851Z,1509457254.851 [BPC1] No Fault, FailCount= 2
2017-10-31T13:40:56.800Z,1509457256.800 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T13:40:57.215Z,1509457257.215 [PNI_TCM](ERROR): CRC does not match. Expected:0x1760 got:0x43072
2017-10-31T13:42:24.172Z,1509457344.172 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:42:35.021Z,1509457355.021 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002616
CHAN A1 (24V): -0.004433
CHAN A2 (12V): -0.001868
CHAN A3 (5V): 0.000214
CHAN B0 (3.3V): -0.000717
CHAN B1 (3.15aV): 0.000133
CHAN B2 (3.15bV): -0.000358
CHAN B3 (GND): 0.000296
OPEN: -0.000462
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:43:33.643Z,1509457413.643 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T13:43:33.643Z,1509457413.643 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:43:33.643Z,1509457413.643 [BPC1](ERROR): Data Fault
2017-10-31T13:43:33.720Z,1509457413.720 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:43:34.868Z,1509457414.868 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:43:34.868Z,1509457414.868 [BPC1] No Fault, FailCount= 1
2017-10-31T13:43:37.668Z,1509457417.668 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T13:43:48.451Z,1509457428.451 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:43:48.451Z,1509457428.451 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T13:43:48.451Z,1509457428.451 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:43:48.495Z,1509457428.495 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:43:48.885Z,1509457428.885 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:43:48.885Z,1509457428.885 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T13:43:49.253Z,1509457429.253 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:43:49.254Z,1509457429.254 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:43:49.254Z,1509457429.254 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:44:02.872Z,1509457442.872 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T13:39:02.5Z
2017-10-31T13:44:02.872Z,1509457442.872 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T13:44:02.872Z,1509457442.872 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T13:44:07.591Z,1509457447.591 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:44:07.670Z,1509457447.670 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0372.lzma
2017-10-31T13:44:08.410Z,1509457448.410 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0372.lzma.bak
2017-10-31T13:44:08.411Z,1509457448.411 [DataOverHttps](INFO): SBD MOMSN=5179061
2017-10-31T13:44:13.612Z,1509457453.612 [PNI_TCM](ERROR): CRC does not match. Expected:0x36005 got:0x49330
2017-10-31T13:44:17.850Z,1509457457.850 [DataOverHttps](INFO): Sending 544 bytes from file Logs/20171030T210256/Express0373.lzma
2017-10-31T13:44:18.649Z,1509457458.649 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0373.lzma.bak
2017-10-31T13:44:18.650Z,1509457458.650 [DataOverHttps](INFO): SBD MOMSN=5179063
2017-10-31T13:44:19.129Z,1509457459.129 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T13:44:19.129Z,1509457459.129 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T13:44:19.129Z,1509457459.129 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T13:44:22.909Z,1509457462.909 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T13:44:25.929Z,1509457465.929 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002463
CHAN A1 (24V): -0.004489
CHAN A2 (12V): -0.002039
CHAN A3 (5V): 0.000223
CHAN B0 (3.3V): -0.000139
CHAN B1 (3.15aV): 0.000083
CHAN B2 (3.15bV): -0.000523
CHAN B3 (GND): 0.000137
OPEN: -0.000435
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:44:53.055Z,1509457493.055 [NAL9602](INFO): Powering down
2017-10-31T13:45:27.239Z,1509457527.239 [PNI_TCM](ERROR): CRC does not match. Expected:0x14412 got:0x16982
2017-10-31T13:45:32.038Z,1509457532.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x7604 got:0x45576
2017-10-31T13:45:44.831Z,1509457544.831 [PNI_TCM](ERROR): CRC does not match. Expected:0x37089 got:0x50409
2017-10-31T13:45:54.413Z,1509457554.413 [PNI_TCM](ERROR): CRC does not match. Expected:0x27423 got:0x42167
2017-10-31T13:45:56.020Z,1509457556.020 [PNI_TCM](ERROR): CRC does not match. Expected:0x40188 got:0x6591
2017-10-31T13:45:56.061Z,1509457556.061 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:45:57.620Z,1509457557.620 [PNI_TCM](ERROR): CRC does not match. Expected:0x47606 got:0x1857
2017-10-31T13:46:02.433Z,1509457562.433 [PNI_TCM](ERROR): CRC does not match. Expected:0x33975 got:0x64572
2017-10-31T13:46:06.856Z,1509457566.856 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134169
CHAN A1 (24V): -0.003491
CHAN A2 (12V): -0.002115
CHAN A3 (5V): 0.000042
CHAN B0 (3.3V): -0.000012
CHAN B1 (3.15aV): -0.000107
CHAN B2 (3.15bV): -0.000866
CHAN B3 (GND): -0.000151
OPEN: -0.000407
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:46:16.817Z,1509457576.817 [PNI_TCM](ERROR): CRC does not match. Expected:0x15683 got:0x12517
2017-10-31T13:46:18.417Z,1509457578.417 [PNI_TCM](ERROR): CRC does not match. Expected:0x33883 got:0x43264
2017-10-31T13:46:20.020Z,1509457580.020 [PNI_TCM](ERROR): CRC does not match. Expected:0x10643 got:0x156
2017-10-31T13:46:49.491Z,1509457609.491 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:46:49.491Z,1509457609.491 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T13:46:49.491Z,1509457609.491 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:46:49.505Z,1509457609.505 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:46:49.906Z,1509457609.906 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:46:49.906Z,1509457609.906 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T13:46:50.304Z,1509457610.304 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:46:50.305Z,1509457610.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:46:50.305Z,1509457610.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:47:36.990Z,1509457656.990 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:47:47.762Z,1509457667.762 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002887
CHAN A1 (24V): -0.004101
CHAN A2 (12V): -0.002310
CHAN A3 (5V): 0.000262
CHAN B0 (3.3V): -0.000784
CHAN B1 (3.15aV): -0.000776
CHAN B2 (3.15bV): 0.000042
CHAN B3 (GND): 0.000330
OPEN: -0.000477
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:48:33.494Z,1509457713.494 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:48:33.494Z,1509457713.494 [BPC1] Communications Fault, FailCount= 1
2017-10-31T13:48:33.494Z,1509457713.494 [BPC1](ERROR): Communications Fault
2017-10-31T13:48:33.517Z,1509457713.517 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:48:34.745Z,1509457714.745 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:48:34.745Z,1509457714.745 [BPC1] No Fault, FailCount= 1
2017-10-31T13:49:17.948Z,1509457757.948 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:49:19.910Z,1509457759.910 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T13:49:19.910Z,1509457759.910 [Default:CheckIn:C.Wait] Stopped
2017-10-31T13:49:19.910Z,1509457759.910 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T13:49:19.910Z,1509457759.910 [Default:CheckIn:D] Running Loop=1
2017-10-31T13:49:20.311Z,1509457760.311 [Default:CheckIn:D] Stopped
2017-10-31T13:49:20.311Z,1509457760.311 [Default:CheckIn:E] Running Loop=1
2017-10-31T13:49:20.711Z,1509457760.711 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 912.209961 min 
2017-10-31T13:49:20.712Z,1509457760.712 [Default:CheckIn:E] Stopped
2017-10-31T13:49:20.712Z,1509457760.712 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T13:49:20.712Z,1509457760.712 [Default:CheckIn] Stopped
2017-10-31T13:49:20.712Z,1509457760.712 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T13:49:20.712Z,1509457760.712 [Default:CheckIn](INFO): Running loop #85
2017-10-31T13:49:20.712Z,1509457760.712 [Default:CheckIn] Running Loop=85
2017-10-31T13:49:20.712Z,1509457760.712 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T13:49:20.713Z,1509457760.713 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T13:49:24.110Z,1509457764.110 [NAL9602](INFO): Powering up
2017-10-31T13:49:31.014Z,1509457771.014 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135089
CHAN A1 (24V): -0.003915
CHAN A2 (12V): -0.002136
CHAN A3 (5V): 0.000295
CHAN B0 (3.3V): 0.000076
CHAN B1 (3.15aV): -0.000578
CHAN B2 (3.15bV): -0.000448
CHAN B3 (GND): -0.000347
OPEN: -0.000451
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:49:34.924Z,1509457774.924 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:49:35.714Z,1509457775.714 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T13:49:35.714Z,1509457775.714 [NAL9602] Data Fault, FailCount= 2
2017-10-31T13:49:35.714Z,1509457775.714 [NAL9602](ERROR): Data Fault
2017-10-31T13:49:35.798Z,1509457775.798 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T13:49:36.125Z,1509457776.125 [NAL9602](INFO): Powering down
2017-10-31T13:49:36.988Z,1509457776.988 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T13:49:36.988Z,1509457776.988 [NAL9602] No Fault, FailCount= 2
2017-10-31T13:49:50.570Z,1509457790.570 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:49:50.570Z,1509457790.570 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T13:49:50.570Z,1509457790.570 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:49:50.596Z,1509457790.596 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:49:50.989Z,1509457790.989 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:49:50.989Z,1509457790.989 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T13:49:51.352Z,1509457791.352 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:49:51.376Z,1509457791.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:49:51.377Z,1509457791.377 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:50:06.514Z,1509457806.514 [NAL9602](INFO): Powering up NAL9602
2017-10-31T13:50:17.715Z,1509457817.715 [NAL9602](INFO): NAL9602 initialized
2017-10-31T13:50:24.769Z,1509457824.769 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T13:50:24.769Z,1509457824.769 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:50:24.769Z,1509457824.769 [BPC1](ERROR): Data Fault
2017-10-31T13:50:24.890Z,1509457824.890 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:50:25.820Z,1509457825.820 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:50:25.820Z,1509457825.820 [BPC1] No Fault, FailCount= 1
2017-10-31T13:50:49.741Z,1509457849.741 [BPC1](ERROR): Failed to receive battery data
2017-10-31T13:50:49.741Z,1509457849.741 [BPC1] Communications Fault, FailCount= 2
2017-10-31T13:50:49.741Z,1509457849.741 [BPC1](ERROR): Communications Fault
2017-10-31T13:50:49.788Z,1509457849.788 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T13:50:50.978Z,1509457850.978 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:50:50.978Z,1509457850.978 [BPC1] No Fault, FailCount= 2
2017-10-31T13:51:01.389Z,1509457861.389 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:51:12.186Z,1509457872.186 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003125
CHAN A1 (24V): -0.004094
CHAN A2 (12V): -0.002332
CHAN A3 (5V): 0.000067
CHAN B0 (3.3V): -0.000066
CHAN B1 (3.15aV): 0.000022
CHAN B2 (3.15bV): -0.000263
CHAN B3 (GND): -0.000316
OPEN: -0.000394
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:52:17.310Z,1509457937.310 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T13:52:17.310Z,1509457937.310 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:52:17.310Z,1509457937.310 [BPC1](ERROR): Data Fault
2017-10-31T13:52:17.389Z,1509457937.389 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:52:18.547Z,1509457938.547 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:52:18.547Z,1509457938.547 [BPC1] No Fault, FailCount= 1
2017-10-31T13:52:42.438Z,1509457962.438 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:52:51.618Z,1509457971.618 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:52:51.618Z,1509457971.618 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-31T13:52:51.618Z,1509457971.618 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:52:51.652Z,1509457971.652 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:52:52.023Z,1509457972.023 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:52:52.023Z,1509457972.023 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-31T13:52:52.416Z,1509457972.416 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:52:52.417Z,1509457972.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:52:52.417Z,1509457972.417 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:52:53.256Z,1509457973.256 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134542
CHAN A1 (24V): -0.003779
CHAN A2 (12V): -0.002035
CHAN A3 (5V): 0.000008
CHAN B0 (3.3V): -0.000128
CHAN B1 (3.15aV): 0.000046
CHAN B2 (3.15bV): -0.000407
CHAN B3 (GND): 0.000308
OPEN: -0.000394
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:53:37.927Z,1509458017.927 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T13:54:21.104Z,1509458061.104 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T13:49:20.7Z
2017-10-31T13:54:21.104Z,1509458061.104 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T13:54:21.104Z,1509458061.104 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T13:54:26.882Z,1509458066.882 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:54:26.948Z,1509458066.948 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0376.lzma
2017-10-31T13:54:27.729Z,1509458067.729 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0376.lzma.bak
2017-10-31T13:54:27.729Z,1509458067.729 [DataOverHttps](INFO): SBD MOMSN=5179078
2017-10-31T13:54:37.080Z,1509458077.080 [DataOverHttps](INFO): Sending 643 bytes from file Logs/20171030T210256/Express0377.lzma
2017-10-31T13:54:37.885Z,1509458077.885 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0377.lzma.bak
2017-10-31T13:54:37.885Z,1509458077.885 [DataOverHttps](INFO): SBD MOMSN=5179080
2017-10-31T13:54:38.376Z,1509458078.376 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T13:54:38.377Z,1509458078.377 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T13:54:38.377Z,1509458078.377 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T13:54:45.022Z,1509458085.022 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.001192
CHAN A1 (24V): -0.004583
CHAN A2 (12V): -0.002080
CHAN A3 (5V): 0.000616
CHAN B0 (3.3V): -0.000408
CHAN B1 (3.15aV): -0.000335
CHAN B2 (3.15bV): -0.000354
CHAN B3 (GND): 0.000379
OPEN: -0.000451
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:55:27.755Z,1509458127.755 [NAL9602](INFO): SBD MO Status=2, MOMSN=3326, MT Status=2, MTMSN=0
2017-10-31T13:55:27.755Z,1509458127.755 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T13:55:28.154Z,1509458128.154 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T13:55:43.163Z,1509458143.163 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T13:55:43.163Z,1509458143.163 [BPC1] Data Fault, FailCount= 1
2017-10-31T13:55:43.164Z,1509458143.164 [BPC1](ERROR): Data Fault
2017-10-31T13:55:43.188Z,1509458143.188 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T13:55:44.403Z,1509458144.403 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T13:55:44.403Z,1509458144.403 [BPC1] No Fault, FailCount= 1
2017-10-31T13:55:52.762Z,1509458152.762 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:55:52.762Z,1509458152.762 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-31T13:55:52.762Z,1509458152.762 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:55:52.790Z,1509458152.790 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:55:53.223Z,1509458153.223 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:55:53.223Z,1509458153.223 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-31T13:55:53.571Z,1509458153.571 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:55:53.571Z,1509458153.571 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:55:53.572Z,1509458153.572 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:55:58.720Z,1509458158.720 [NAL9602](INFO): Powering down
2017-10-31T13:56:15.180Z,1509458175.180 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:56:25.988Z,1509458185.988 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003037
CHAN A1 (24V): -0.003320
CHAN A2 (12V): -0.002079
CHAN A3 (5V): 0.000257
CHAN B0 (3.3V): -0.000193
CHAN B1 (3.15aV): -0.000316
CHAN B2 (3.15bV): 0.000089
CHAN B3 (GND): 0.000429
OPEN: -0.000841
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:56:44.038Z,1509458204.038 [PNI_TCM](ERROR): CRC does not match. Expected:0x58206 got:0x55576
2017-10-31T13:56:45.641Z,1509458205.641 [PNI_TCM](ERROR): CRC does not match. Expected:0x27893 got:0x7360
2017-10-31T13:56:52.036Z,1509458212.036 [PNI_TCM](ERROR): CRC does not match. Expected:0x3742 got:0x62745
2017-10-31T13:56:53.645Z,1509458213.645 [PNI_TCM](ERROR): CRC does not match. Expected:0x13328 got:0x14364
2017-10-31T13:56:58.444Z,1509458218.444 [PNI_TCM](ERROR): CRC does not match. Expected:0x13452 got:0x22088
2017-10-31T13:57:03.241Z,1509458223.241 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T13:57:06.448Z,1509458226.448 [PNI_TCM](ERROR): CRC does not match. Expected:0x44217 got:0x20507
2017-10-31T13:57:07.228Z,1509458227.228 [PNI_TCM](ERROR): CRC does not match. Expected:0x33198 got:0x45411
2017-10-31T13:57:10.044Z,1509458230.044 [PNI_TCM](ERROR): CRC does not match. Expected:0x61450 got:0x16938
2017-10-31T13:57:25.641Z,1509458245.641 [PNI_TCM](ERROR): CRC does not match. Expected:0x35413 got:0x16809
2017-10-31T13:57:27.242Z,1509458247.242 [PNI_TCM](ERROR): CRC does not match. Expected:0x49462 got:0x49329
2017-10-31T13:57:56.284Z,1509458276.284 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:58:07.081Z,1509458287.081 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004121
CHAN A1 (24V): -0.003149
CHAN A2 (12V): -0.001841
CHAN A3 (5V): 0.000530
CHAN B0 (3.3V): 0.000131
CHAN B1 (3.15aV): 0.000045
CHAN B2 (3.15bV): -0.000488
CHAN B3 (GND): -0.000069
OPEN: -0.000332
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:58:53.695Z,1509458333.695 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T13:58:53.695Z,1509458333.695 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-31T13:58:53.695Z,1509458333.695 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T13:58:53.722Z,1509458333.722 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T13:58:54.124Z,1509458334.124 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T13:58:54.124Z,1509458334.124 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-31T13:58:54.514Z,1509458334.514 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T13:58:54.515Z,1509458334.515 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T13:58:54.515Z,1509458334.515 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T13:59:37.375Z,1509458377.375 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T13:59:38.928Z,1509458378.928 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T13:59:38.928Z,1509458378.928 [Default:CheckIn:C.Wait] Stopped
2017-10-31T13:59:38.928Z,1509458378.928 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T13:59:38.928Z,1509458378.928 [Default:CheckIn:D] Running Loop=1
2017-10-31T13:59:39.295Z,1509458379.295 [Default:CheckIn:D] Stopped
2017-10-31T13:59:39.295Z,1509458379.295 [Default:CheckIn:E] Running Loop=1
2017-10-31T13:59:39.699Z,1509458379.699 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 922.526367 min 
2017-10-31T13:59:39.700Z,1509458379.700 [Default:CheckIn:E] Stopped
2017-10-31T13:59:39.700Z,1509458379.700 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T13:59:39.700Z,1509458379.700 [Default:CheckIn] Stopped
2017-10-31T13:59:39.700Z,1509458379.700 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T13:59:39.700Z,1509458379.700 [Default:CheckIn](INFO): Running loop #86
2017-10-31T13:59:39.700Z,1509458379.700 [Default:CheckIn] Running Loop=86
2017-10-31T13:59:39.700Z,1509458379.700 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T13:59:39.700Z,1509458379.700 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T13:59:43.092Z,1509458383.092 [NAL9602](INFO): Powering up
2017-10-31T13:59:51.214Z,1509458391.214 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003278
CHAN A1 (24V): -0.003711
CHAN A2 (12V): -0.002209
CHAN A3 (5V): 0.000486
CHAN B0 (3.3V): -0.000224
CHAN B1 (3.15aV): -0.000022
CHAN B2 (3.15bV): -0.000187
CHAN B3 (GND): -0.000533
OPEN: -0.000448
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T13:59:53.898Z,1509458393.898 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:00:29.111Z,1509458429.111 [NAL9602](INFO): SBD MO Status=2, MOMSN=3326, MT Status=2, MTMSN=0
2017-10-31T14:00:29.111Z,1509458429.111 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T14:00:36.747Z,1509458436.747 [BPC1](ERROR): Failed to receive battery data
2017-10-31T14:00:36.747Z,1509458436.747 [BPC1] Communications Fault, FailCount= 1
2017-10-31T14:00:36.747Z,1509458436.747 [BPC1](ERROR): Communications Fault
2017-10-31T14:00:36.770Z,1509458436.770 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T14:00:37.962Z,1509458437.962 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:00:37.962Z,1509458437.962 [BPC1] No Fault, FailCount= 1
2017-10-31T14:01:21.415Z,1509458481.415 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:01:32.248Z,1509458492.248 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133983
CHAN A1 (24V): -0.004401
CHAN A2 (12V): -0.001970
CHAN A3 (5V): 0.000045
CHAN B0 (3.3V): 0.000228
CHAN B1 (3.15aV): -0.000193
CHAN B2 (3.15bV): -0.000348
CHAN B3 (GND): 0.000111
OPEN: -0.000400
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:01:54.669Z,1509458514.669 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:01:54.669Z,1509458514.669 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-31T14:01:54.669Z,1509458514.669 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:01:54.695Z,1509458514.695 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:01:55.082Z,1509458515.082 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:01:55.082Z,1509458515.082 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-31T14:01:55.457Z,1509458515.457 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:01:55.457Z,1509458515.457 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:01:55.458Z,1509458515.458 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:03:02.454Z,1509458582.454 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:03:13.278Z,1509458593.278 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002796
CHAN A1 (24V): -0.005206
CHAN A2 (12V): -0.002101
CHAN A3 (5V): 0.000114
CHAN B0 (3.3V): 0.000385
CHAN B1 (3.15aV): -0.000607
CHAN B2 (3.15bV): 0.000024
CHAN B3 (GND): 0.000211
OPEN: -0.000403
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:03:38.047Z,1509458618.047 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T14:04:39.815Z,1509458679.815 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T13:59:39.7Z
2017-10-31T14:04:39.815Z,1509458679.815 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T14:04:39.815Z,1509458679.815 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T14:04:44.008Z,1509458684.008 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:04:44.046Z,1509458684.046 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0380.lzma
2017-10-31T14:04:44.836Z,1509458684.836 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0380.lzma.bak
2017-10-31T14:04:44.836Z,1509458684.836 [DataOverHttps](INFO): SBD MOMSN=5179097
2017-10-31T14:04:54.124Z,1509458694.124 [DataOverHttps](INFO): Sending 626 bytes from file Logs/20171030T210256/Express0381.lzma
2017-10-31T14:04:54.928Z,1509458694.928 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0381.lzma.bak
2017-10-31T14:04:54.928Z,1509458694.928 [DataOverHttps](INFO): SBD MOMSN=5179099
2017-10-31T14:04:55.420Z,1509458695.420 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T14:04:55.420Z,1509458695.420 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T14:04:55.420Z,1509458695.420 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T14:04:55.795Z,1509458695.795 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:04:55.795Z,1509458695.795 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-31T14:04:55.796Z,1509458695.796 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:04:55.845Z,1509458695.845 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:04:59.020Z,1509458699.020 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T14:04:59.110Z,1509458699.110 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:04:59.110Z,1509458699.110 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-31T14:04:59.259Z,1509458699.259 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:04:59.265Z,1509458699.265 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:04:59.265Z,1509458699.265 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:05:02.095Z,1509458702.095 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133547
CHAN A1 (24V): -0.004347
CHAN A2 (12V): -0.002162
CHAN A3 (5V): 0.000277
CHAN B0 (3.3V): -0.000074
CHAN B1 (3.15aV): -0.000569
CHAN B2 (3.15bV): -0.000366
CHAN B3 (GND): -0.000197
OPEN: -0.000485
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:05:08.834Z,1509458708.834 [PNI_TCM](ERROR): CRC does not match. Expected:0x63034 got:0x6978
2017-10-31T14:05:29.204Z,1509458729.204 [NAL9602](INFO): Powering down
2017-10-31T14:05:39.228Z,1509458739.228 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T14:06:13.010Z,1509458773.010 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T14:06:13.010Z,1509458773.010 [BPC1] Data Fault, FailCount= 1
2017-10-31T14:06:13.010Z,1509458773.010 [BPC1](ERROR): Data Fault
2017-10-31T14:06:13.062Z,1509458773.062 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T14:06:14.266Z,1509458774.266 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:06:14.266Z,1509458774.266 [BPC1] No Fault, FailCount= 1
2017-10-31T14:06:32.249Z,1509458792.249 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:06:43.057Z,1509458803.057 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002934
CHAN A1 (24V): -0.003674
CHAN A2 (12V): -0.002386
CHAN A3 (5V): -0.000192
CHAN B0 (3.3V): 0.000299
CHAN B1 (3.15aV): -0.000335
CHAN B2 (3.15bV): -0.000448
CHAN B3 (GND): -0.000192
OPEN: -0.000547
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:07:59.882Z,1509458879.882 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:07:59.882Z,1509458879.882 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-31T14:07:59.882Z,1509458879.882 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:07:59.928Z,1509458879.928 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:08:00.057Z,1509458880.057 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:08:00.057Z,1509458880.057 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-31T14:08:00.396Z,1509458880.396 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:08:00.396Z,1509458880.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:08:00.396Z,1509458880.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:08:13.198Z,1509458893.198 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:08:24.027Z,1509458904.027 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134898
CHAN A1 (24V): -0.003265
CHAN A2 (12V): -0.002457
CHAN A3 (5V): 0.000009
CHAN B0 (3.3V): 0.000316
CHAN B1 (3.15aV): -0.000192
CHAN B2 (3.15bV): 0.000261
CHAN B3 (GND): 0.000377
OPEN: -0.000632
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:09:54.345Z,1509458994.345 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:09:55.949Z,1509458995.949 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T14:09:55.949Z,1509458995.949 [Default:CheckIn:C.Wait] Stopped
2017-10-31T14:09:55.949Z,1509458995.949 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T14:09:55.950Z,1509458995.950 [Default:CheckIn:D] Running Loop=1
2017-10-31T14:09:56.371Z,1509458996.371 [Default:CheckIn:D] Stopped
2017-10-31T14:09:56.371Z,1509458996.371 [Default:CheckIn:E] Running Loop=1
2017-10-31T14:09:56.751Z,1509458996.751 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 932.810938 min 
2017-10-31T14:09:56.751Z,1509458996.751 [Default:CheckIn:E] Stopped
2017-10-31T14:09:56.751Z,1509458996.751 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T14:09:56.751Z,1509458996.751 [Default:CheckIn] Stopped
2017-10-31T14:09:56.751Z,1509458996.751 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T14:09:56.752Z,1509458996.752 [Default:CheckIn](INFO): Running loop #87
2017-10-31T14:09:56.752Z,1509458996.752 [Default:CheckIn] Running Loop=87
2017-10-31T14:09:56.752Z,1509458996.752 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T14:09:56.752Z,1509458996.752 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T14:10:00.353Z,1509459000.353 [NAL9602](INFO): Powering up
2017-10-31T14:10:07.392Z,1509459007.392 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003817
CHAN A1 (24V): -0.004048
CHAN A2 (12V): -0.002216
CHAN A3 (5V): 0.000463
CHAN B0 (3.3V): 0.000273
CHAN B1 (3.15aV): 0.000263
CHAN B2 (3.15bV): -0.000216
CHAN B3 (GND): 0.000167
OPEN: -0.000224
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:10:11.343Z,1509459011.343 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:10:12.140Z,1509459012.140 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T14:10:12.140Z,1509459012.140 [NAL9602] Data Fault, FailCount= 3
2017-10-31T14:10:12.140Z,1509459012.140 [NAL9602](ERROR): Data Fault
2017-10-31T14:10:12.221Z,1509459012.221 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T14:10:12.540Z,1509459012.540 [NAL9602](INFO): Powering down
2017-10-31T14:10:13.401Z,1509459013.401 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T14:10:13.401Z,1509459013.401 [NAL9602] No Fault, FailCount= 3
2017-10-31T14:10:26.577Z,1509459026.577 [BPC1](ERROR): Failed to receive battery data
2017-10-31T14:10:26.578Z,1509459026.578 [BPC1] Communications Fault, FailCount= 1
2017-10-31T14:10:26.578Z,1509459026.578 [BPC1](ERROR): Communications Fault
2017-10-31T14:10:26.600Z,1509459026.600 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T14:10:27.836Z,1509459027.836 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:10:27.837Z,1509459027.837 [BPC1] No Fault, FailCount= 1
2017-10-31T14:10:42.544Z,1509459042.544 [NAL9602](INFO): Powering up NAL9602
2017-10-31T14:10:53.742Z,1509459053.742 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:11:00.700Z,1509459060.700 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:11:00.700Z,1509459060.700 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-31T14:11:00.700Z,1509459060.700 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:11:00.714Z,1509459060.714 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:11:00.872Z,1509459060.872 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:11:00.872Z,1509459060.872 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-31T14:11:01.183Z,1509459061.183 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:11:01.184Z,1509459061.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:11:01.184Z,1509459061.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:11:37.601Z,1509459097.601 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:11:48.421Z,1509459108.421 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134094
CHAN A1 (24V): -0.004404
CHAN A2 (12V): -0.001915
CHAN A3 (5V): 0.000183
CHAN B0 (3.3V): 0.000160
CHAN B1 (3.15aV): -0.000805
CHAN B2 (3.15bV): -0.000126
CHAN B3 (GND): 0.000485
OPEN: -0.000227
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:13:18.638Z,1509459198.638 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:13:29.529Z,1509459209.529 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003306
CHAN A1 (24V): -0.003948
CHAN A2 (12V): -0.002120
CHAN A3 (5V): 0.000241
CHAN B0 (3.3V): -0.000105
CHAN B1 (3.15aV): 0.000128
CHAN B2 (3.15bV): 0.000357
CHAN B3 (GND): -0.000519
OPEN: -0.000135
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:13:38.261Z,1509459218.261 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T14:14:01.265Z,1509459241.265 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:14:01.265Z,1509459241.265 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-31T14:14:01.265Z,1509459241.265 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:14:01.279Z,1509459241.279 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:14:01.651Z,1509459241.651 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:14:01.651Z,1509459241.651 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-31T14:14:02.050Z,1509459242.050 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:14:02.051Z,1509459242.051 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:14:02.051Z,1509459242.051 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:14:56.864Z,1509459296.864 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T14:09:56.8Z
2017-10-31T14:14:56.864Z,1509459296.865 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T14:14:56.865Z,1509459296.865 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T14:15:02.774Z,1509459302.774 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:15:03.199Z,1509459303.199 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0384.lzma
2017-10-31T14:15:03.991Z,1509459303.991 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0384.lzma.bak
2017-10-31T14:15:03.991Z,1509459303.991 [DataOverHttps](INFO): SBD MOMSN=5179115
2017-10-31T14:15:13.359Z,1509459313.359 [DataOverHttps](INFO): Sending 658 bytes from file Logs/20171030T210256/Express0385.lzma
2017-10-31T14:15:14.163Z,1509459314.163 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0385.lzma.bak
2017-10-31T14:15:14.164Z,1509459314.164 [DataOverHttps](INFO): SBD MOMSN=5179117
2017-10-31T14:15:14.643Z,1509459314.643 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T14:15:14.643Z,1509459314.643 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T14:15:14.643Z,1509459314.643 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T14:15:21.353Z,1509459321.353 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133863
CHAN A1 (24V): -0.004572
CHAN A2 (12V): -0.002182
CHAN A3 (5V): 0.000185
CHAN B0 (3.3V): 0.000587
CHAN B1 (3.15aV): -0.000494
CHAN B2 (3.15bV): -0.000137
CHAN B3 (GND): 0.000438
OPEN: -0.000306
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:15:24.084Z,1509459324.084 [PNI_TCM](ERROR): CRC does not match. Expected:0x23794 got:0x6335
2017-10-31T14:15:25.671Z,1509459325.671 [PNI_TCM](ERROR): CRC does not match. Expected:0x13032 got:0x28187
2017-10-31T14:15:30.467Z,1509459330.467 [PNI_TCM](ERROR): CRC does not match. Expected:0x35844 got:0x16541
2017-10-31T14:15:30.870Z,1509459330.870 [PNI_TCM](ERROR): CRC does not match. Expected:0x27844 got:0x10929
2017-10-31T14:15:32.078Z,1509459332.078 [PNI_TCM](ERROR): CRC does not match. Expected:0x10914 got:0x33703
2017-10-31T14:15:33.684Z,1509459333.684 [PNI_TCM](ERROR): CRC does not match. Expected:0x18145 got:0x1344
2017-10-31T14:15:37.278Z,1509459337.278 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T14:15:48.076Z,1509459348.076 [PNI_TCM](ERROR): CRC does not match. Expected:0x51297 got:0x52764
2017-10-31T14:15:52.865Z,1509459352.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x12118 got:0x19993
2017-10-31T14:15:53.264Z,1509459353.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x17967 got:0x22063
2017-10-31T14:15:54.487Z,1509459354.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x22970 got:0x61876
2017-10-31T14:15:56.072Z,1509459356.072 [PNI_TCM](ERROR): CRC does not match. Expected:0x1639 got:0x42792
2017-10-31T14:15:56.434Z,1509459356.434 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T14:15:57.673Z,1509459357.673 [PNI_TCM](ERROR): CRC does not match. Expected:0x10854 got:0x39964
2017-10-31T14:15:58.459Z,1509459358.459 [PNI_TCM](ERROR): CRC does not match. Expected:0x41490 got:0x22791
2017-10-31T14:16:04.074Z,1509459364.074 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-31T14:16:05.671Z,1509459365.671 [PNI_TCM](ERROR): CRC does not match. Expected:0x49129 got:0x62969
2017-10-31T14:16:14.476Z,1509459374.476 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T14:16:14.476Z,1509459374.476 [BPC1] Data Fault, FailCount= 1
2017-10-31T14:16:14.476Z,1509459374.476 [BPC1](ERROR): Data Fault
2017-10-31T14:16:14.539Z,1509459374.539 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T14:16:18.625Z,1509459378.625 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:16:18.626Z,1509459378.626 [BPC1] No Fault, FailCount= 1
2017-10-31T14:16:27.069Z,1509459387.069 [NAL9602](INFO): Powering down
2017-10-31T14:16:51.558Z,1509459411.558 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:17:02.300Z,1509459422.300 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:17:02.300Z,1509459422.300 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-31T14:17:02.300Z,1509459422.300 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:17:02.341Z,1509459422.341 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:17:02.345Z,1509459422.345 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003453
CHAN A1 (24V): -0.003264
CHAN A2 (12V): -0.002294
CHAN A3 (5V): 0.000407
CHAN B0 (3.3V): -0.000063
CHAN B1 (3.15aV): 0.000399
CHAN B2 (3.15bV): 0.000145
CHAN B3 (GND): -0.000086
OPEN: -0.000435
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:17:02.734Z,1509459422.734 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:17:02.734Z,1509459422.734 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-31T14:17:03.143Z,1509459423.143 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:17:03.144Z,1509459423.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:17:03.144Z,1509459423.144 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:17:21.668Z,1509459441.668 [PNI_TCM](ERROR): CRC does not match. Expected:0x31726 got:0x6335
2017-10-31T14:18:32.711Z,1509459512.711 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:18:43.511Z,1509459523.511 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134545
CHAN A1 (24V): -0.003774
CHAN A2 (12V): -0.002129
CHAN A3 (5V): 0.000217
CHAN B0 (3.3V): 0.000340
CHAN B1 (3.15aV): -0.000346
CHAN B2 (3.15bV): -0.000369
CHAN B3 (GND): -0.000144
OPEN: -0.000365
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:19:28.888Z,1509459568.888 [PNI_TCM](ERROR): CRC does not match. Expected:0x34944 got:0x16938
2017-10-31T14:20:03.316Z,1509459603.316 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:20:03.316Z,1509459603.316 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-31T14:20:03.316Z,1509459603.316 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:20:03.351Z,1509459603.351 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:20:03.798Z,1509459603.798 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:20:03.798Z,1509459603.798 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-31T14:20:04.117Z,1509459604.117 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:20:04.118Z,1509459604.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:20:04.118Z,1509459604.118 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:20:07.290Z,1509459607.290 [PNI_TCM](ERROR): CRC does not match. Expected:0x22222 got:0x46
2017-10-31T14:20:12.088Z,1509459612.088 [PNI_TCM](ERROR): CRC does not match. Expected:0x2741 got:0x46217
2017-10-31T14:20:13.691Z,1509459613.691 [PNI_TCM](ERROR): CRC does not match. Expected:0x47894 got:0x43328
2017-10-31T14:20:13.769Z,1509459613.769 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:20:15.322Z,1509459615.322 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T14:20:15.322Z,1509459615.322 [Default:CheckIn:C.Wait] Stopped
2017-10-31T14:20:15.322Z,1509459615.322 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T14:20:15.323Z,1509459615.323 [Default:CheckIn:D] Running Loop=1
2017-10-31T14:20:15.715Z,1509459615.715 [Default:CheckIn:D] Stopped
2017-10-31T14:20:15.715Z,1509459615.715 [Default:CheckIn:E] Running Loop=1
2017-10-31T14:20:16.120Z,1509459616.120 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 943.133333 min 
2017-10-31T14:20:16.120Z,1509459616.120 [Default:CheckIn:E] Stopped
2017-10-31T14:20:16.120Z,1509459616.120 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T14:20:16.120Z,1509459616.120 [Default:CheckIn] Stopped
2017-10-31T14:20:16.120Z,1509459616.120 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T14:20:16.120Z,1509459616.120 [Default:CheckIn](INFO): Running loop #88
2017-10-31T14:20:16.120Z,1509459616.120 [Default:CheckIn] Running Loop=88
2017-10-31T14:20:16.121Z,1509459616.121 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T14:20:16.121Z,1509459616.121 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T14:20:19.759Z,1509459619.759 [NAL9602](INFO): Powering up
2017-10-31T14:20:27.856Z,1509459627.856 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003800
CHAN A1 (24V): -0.003795
CHAN A2 (12V): -0.002394
CHAN A3 (5V): -0.000003
CHAN B0 (3.3V): 0.000155
CHAN B1 (3.15aV): -0.000140
CHAN B2 (3.15bV): -0.000570
CHAN B3 (GND): 0.000117
OPEN: -0.000345
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:20:30.568Z,1509459630.568 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:21:02.558Z,1509459662.558 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T14:21:02.635Z,1509459662.635 [NAL9602](FAULT): received: 
+CSQ:0

OK26, 2, 0, 0, 0

OK
2017-10-31T14:21:02.635Z,1509459662.635 [NAL9602] Data Fault, FailCount= 4
2017-10-31T14:21:02.635Z,1509459662.635 [NAL9602](ERROR): Data Fault
2017-10-31T14:21:02.728Z,1509459662.728 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T14:21:02.961Z,1509459662.961 [NAL9602](INFO): Powering down
2017-10-31T14:21:03.826Z,1509459663.826 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T14:21:03.826Z,1509459663.826 [NAL9602] No Fault, FailCount= 4
2017-10-31T14:21:33.084Z,1509459693.084 [NAL9602](INFO): Powering up NAL9602
2017-10-31T14:21:44.290Z,1509459704.290 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:21:45.092Z,1509459705.092 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T14:21:45.092Z,1509459705.092 [NAL9602] Data Fault, FailCount= 5
2017-10-31T14:21:45.092Z,1509459705.092 [NAL9602](ERROR): Data Fault
2017-10-31T14:21:45.194Z,1509459705.194 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T14:21:45.195Z,1509459705.195 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T14:21:45.484Z,1509459705.484 [NAL9602](INFO): Powering down
2017-10-31T14:21:45.584Z,1509459705.584 [CBIT](INFO): Critical error at 20171031T142145
2017-10-31T14:21:57.949Z,1509459717.949 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:22:08.746Z,1509459728.746 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134734
CHAN A1 (24V): -0.003200
CHAN A2 (12V): -0.002248
CHAN A3 (5V): 0.000182
CHAN B0 (3.3V): -0.000554
CHAN B1 (3.15aV): 0.000425
CHAN B2 (3.15bV): 0.000122
CHAN B3 (GND): 0.000314
OPEN: -0.000227
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:23:04.272Z,1509459784.272 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:23:04.273Z,1509459784.273 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-31T14:23:04.273Z,1509459784.273 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:23:04.307Z,1509459784.307 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:23:04.671Z,1509459784.671 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:23:04.671Z,1509459784.671 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-31T14:23:05.057Z,1509459785.057 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:23:05.058Z,1509459785.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:23:05.058Z,1509459785.058 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:23:38.589Z,1509459818.589 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T14:23:38.983Z,1509459818.983 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:23:45.416Z,1509459825.416 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T14:23:45.416Z,1509459825.416 [NAL9602] No Fault, FailCount= 5
2017-10-31T14:23:45.738Z,1509459825.738 [NAL9602](INFO): Powering up NAL9602
2017-10-31T14:23:49.797Z,1509459829.797 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.003461
CHAN A1 (24V): -0.003461
CHAN A2 (12V): 4.697929
CHAN A3 (5V): -0.000474
CHAN B0 (3.3V): -0.000031
CHAN B1 (3.15aV): -0.000181
CHAN B2 (3.15bV): -0.000446
CHAN B3 (GND): -0.000109
OPEN: -0.000479
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:23:56.932Z,1509459836.932 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:25:16.429Z,1509459916.429 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T14:20:16.1Z
2017-10-31T14:25:16.429Z,1509459916.429 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T14:25:16.430Z,1509459916.430 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T14:25:20.460Z,1509459920.460 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:25:20.541Z,1509459920.541 [DataOverHttps](INFO): Sending 87 bytes from file Logs/20171030T210256/Courier0388.lzma
2017-10-31T14:25:21.276Z,1509459921.276 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0388.lzma.bak
2017-10-31T14:25:21.277Z,1509459921.277 [DataOverHttps](INFO): SBD MOMSN=5179134
2017-10-31T14:25:31.544Z,1509459931.544 [DataOverHttps](INFO): Sending 694 bytes from file Logs/20171030T210256/Express0389.lzma
2017-10-31T14:25:32.349Z,1509459932.349 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0389.lzma.bak
2017-10-31T14:25:32.349Z,1509459932.349 [DataOverHttps](INFO): SBD MOMSN=5179137
2017-10-31T14:25:32.833Z,1509459932.833 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T14:25:32.833Z,1509459932.833 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T14:25:32.833Z,1509459932.833 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T14:25:36.414Z,1509459936.414 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T14:25:39.469Z,1509459939.469 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133264
CHAN A1 (24V): -0.003956
CHAN A2 (12V): -0.002124
CHAN A3 (5V): 0.000036
CHAN B0 (3.3V): 0.000126
CHAN B1 (3.15aV): -0.000328
CHAN B2 (3.15bV): -0.000320
CHAN B3 (GND): 0.000093
OPEN: -0.000161
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:26:05.081Z,1509459965.081 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:26:05.081Z,1509459965.081 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-31T14:26:05.093Z,1509459965.093 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:26:05.160Z,1509459965.160 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:26:05.507Z,1509459965.507 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:26:05.507Z,1509459965.507 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-31T14:26:05.836Z,1509459965.836 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:26:05.836Z,1509459965.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:26:05.836Z,1509459965.836 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:26:06.594Z,1509459966.594 [NAL9602](INFO): Powering down
2017-10-31T14:27:09.717Z,1509460029.717 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:27:15.232Z,1509460035.232 [BPC1](ERROR): Failed to receive battery data
2017-10-31T14:27:15.232Z,1509460035.232 [BPC1] Communications Fault, FailCount= 1
2017-10-31T14:27:15.232Z,1509460035.232 [BPC1](ERROR): Communications Fault
2017-10-31T14:27:15.279Z,1509460035.279 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T14:27:16.481Z,1509460036.481 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:27:16.481Z,1509460036.481 [BPC1] No Fault, FailCount= 1
2017-10-31T14:27:20.479Z,1509460040.479 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002310
CHAN A1 (24V): -0.004042
CHAN A2 (12V): -0.002568
CHAN A3 (5V): 0.000497
CHAN B0 (3.3V): 0.000299
CHAN B1 (3.15aV): -0.000245
CHAN B2 (3.15bV): 0.000445
CHAN B3 (GND): -0.000069
OPEN: -0.000339
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:28:50.506Z,1509460130.506 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:29:01.287Z,1509460141.287 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134312
CHAN A1 (24V): -0.003627
CHAN A2 (12V): -0.002070
CHAN A3 (5V): 0.000374
CHAN B0 (3.3V): -0.000384
CHAN B1 (3.15aV): -0.000552
CHAN B2 (3.15bV): -0.000014
CHAN B3 (GND): -0.000154
OPEN: -0.000482
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:29:06.067Z,1509460146.067 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:29:06.067Z,1509460146.067 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-31T14:29:06.067Z,1509460146.067 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:29:06.093Z,1509460146.093 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:29:06.498Z,1509460146.498 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:29:06.498Z,1509460146.498 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-31T14:29:06.908Z,1509460146.908 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:29:06.908Z,1509460146.908 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:29:06.909Z,1509460146.909 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:30:31.498Z,1509460231.498 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:30:33.480Z,1509460233.480 [BPC1](ERROR): Failed to parse message.
2017-10-31T14:30:33.480Z,1509460233.480 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T14:30:33.480Z,1509460233.480 [BPC1] Data Fault, FailCount= 1
2017-10-31T14:30:33.480Z,1509460233.480 [BPC1](ERROR): Data Fault
2017-10-31T14:30:33.492Z,1509460233.492 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T14:30:33.492Z,1509460233.492 [Default:CheckIn:C.Wait] Stopped
2017-10-31T14:30:33.492Z,1509460233.492 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T14:30:33.493Z,1509460233.493 [Default:CheckIn:D] Running Loop=1
2017-10-31T14:30:33.503Z,1509460233.503 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T14:30:33.897Z,1509460233.897 [Default:CheckIn:D] Stopped
2017-10-31T14:30:33.897Z,1509460233.897 [Default:CheckIn:E] Running Loop=1
2017-10-31T14:30:34.305Z,1509460234.305 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 953.436393 min 
2017-10-31T14:30:34.305Z,1509460234.305 [Default:CheckIn:E] Stopped
2017-10-31T14:30:34.305Z,1509460234.305 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T14:30:34.306Z,1509460234.306 [Default:CheckIn] Stopped
2017-10-31T14:30:34.306Z,1509460234.306 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T14:30:34.306Z,1509460234.306 [Default:CheckIn](INFO): Running loop #89
2017-10-31T14:30:34.306Z,1509460234.306 [Default:CheckIn] Running Loop=89
2017-10-31T14:30:34.306Z,1509460234.306 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T14:30:34.306Z,1509460234.306 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T14:30:37.662Z,1509460237.662 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:30:37.662Z,1509460237.662 [BPC1] No Fault, FailCount= 1
2017-10-31T14:30:37.752Z,1509460237.752 [NAL9602](INFO): Powering up
2017-10-31T14:30:44.608Z,1509460244.608 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002469
CHAN A1 (24V): -0.004268
CHAN A2 (12V): -0.002107
CHAN A3 (5V): 0.000220
CHAN B0 (3.3V): 0.000063
CHAN B1 (3.15aV): -0.000058
CHAN B2 (3.15bV): -0.000102
CHAN B3 (GND): 0.000214
OPEN: -0.000604
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:30:58.570Z,1509460258.570 [NAL9602](ERROR): NAL9602 initialization error.
2017-10-31T14:30:58.570Z,1509460258.570 [NAL9602] Communications Fault, FailCount= 1
2017-10-31T14:30:58.570Z,1509460258.570 [NAL9602](ERROR): Communications Fault
2017-10-31T14:30:58.659Z,1509460258.659 [CBIT](ERROR): Communications Fault in component: NAL9602
2017-10-31T14:30:58.964Z,1509460258.964 [NAL9602](INFO): Powering down
2017-10-31T14:30:59.848Z,1509460259.848 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T14:30:59.848Z,1509460259.848 [NAL9602] No Fault, FailCount= 1
2017-10-31T14:31:29.357Z,1509460289.357 [NAL9602](INFO): Powering up NAL9602
2017-10-31T14:31:40.285Z,1509460300.285 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:32:07.143Z,1509460327.143 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:32:07.143Z,1509460327.143 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-31T14:32:07.143Z,1509460327.143 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:32:07.169Z,1509460327.169 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:32:07.575Z,1509460327.575 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:32:07.575Z,1509460327.575 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-31T14:32:07.928Z,1509460327.928 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:32:07.929Z,1509460327.929 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:32:07.929Z,1509460327.929 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:32:14.741Z,1509460334.741 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:32:25.566Z,1509460345.566 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003005
CHAN A1 (24V): -0.003779
CHAN A2 (12V): -0.002170
CHAN A3 (5V): 0.000042
CHAN B0 (3.3V): -0.000375
CHAN B1 (3.15aV): -0.000476
CHAN B2 (3.15bV): -0.000381
CHAN B3 (GND): 0.000140
OPEN: -0.000638
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:32:52.110Z,1509460372.110 [PNI_TCM](ERROR): CRC does not match. Expected:0x43756 got:0x6591
2017-10-31T14:33:01.718Z,1509460381.718 [PNI_TCM](ERROR): CRC does not match. Expected:0x42735 got:0x49329
2017-10-31T14:33:11.315Z,1509460391.315 [PNI_TCM](ERROR): CRC does not match. Expected:0x20926 got:0x49068
2017-10-31T14:33:12.911Z,1509460392.911 [PNI_TCM](ERROR): CRC does not match. Expected:0x18191 got:0x6978
2017-10-31T14:33:17.710Z,1509460397.710 [PNI_TCM](ERROR): CRC does not match. Expected:0x4295 got:0x49329
2017-10-31T14:33:19.337Z,1509460399.337 [PNI_TCM](ERROR): CRC does not match. Expected:0x35860 got:0x1857
2017-10-31T14:33:28.910Z,1509460408.910 [PNI_TCM](ERROR): CRC does not match. Expected:0x42405 got:0x16667
2017-10-31T14:33:33.339Z,1509460413.339 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T14:33:33.339Z,1509460413.339 [BPC1] Data Fault, FailCount= 1
2017-10-31T14:33:33.339Z,1509460413.339 [BPC1](ERROR): Data Fault
2017-10-31T14:33:33.363Z,1509460413.363 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T14:33:34.557Z,1509460414.557 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:33:34.557Z,1509460414.557 [BPC1] No Fault, FailCount= 1
2017-10-31T14:33:38.840Z,1509460418.840 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T14:33:55.686Z,1509460435.686 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:34:06.445Z,1509460446.445 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134191
CHAN A1 (24V): -0.003785
CHAN A2 (12V): -0.002430
CHAN A3 (5V): 0.000357
CHAN B0 (3.3V): 0.000413
CHAN B1 (3.15aV): -0.000573
CHAN B2 (3.15bV): -0.000243
CHAN B3 (GND): 0.000176
OPEN: -0.000598
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:35:08.025Z,1509460508.025 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:35:08.025Z,1509460508.025 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-31T14:35:08.025Z,1509460508.025 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:35:08.038Z,1509460508.038 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:35:08.427Z,1509460508.427 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:35:08.427Z,1509460508.427 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-31T14:35:08.801Z,1509460508.801 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:35:08.802Z,1509460508.802 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:35:08.802Z,1509460508.802 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:35:34.448Z,1509460534.448 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T14:30:34.3Z
2017-10-31T14:35:34.449Z,1509460534.449 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T14:35:34.449Z,1509460534.449 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T14:35:38.914Z,1509460538.914 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:35:38.968Z,1509460538.968 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0392.lzma
2017-10-31T14:35:39.729Z,1509460539.729 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0392.lzma.bak
2017-10-31T14:35:39.729Z,1509460539.729 [DataOverHttps](INFO): SBD MOMSN=5179155
2017-10-31T14:35:45.417Z,1509460545.417 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T14:35:45.418Z,1509460545.418 [BPC1] Data Fault, FailCount= 1
2017-10-31T14:35:45.418Z,1509460545.418 [BPC1](ERROR): Data Fault
2017-10-31T14:35:45.462Z,1509460545.462 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T14:35:49.323Z,1509460549.323 [DataOverHttps](INFO): Sending 614 bytes from file Logs/20171030T210256/Express0393.lzma
2017-10-31T14:35:49.422Z,1509460549.422 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:35:49.422Z,1509460549.422 [BPC1] No Fault, FailCount= 1
2017-10-31T14:35:50.126Z,1509460550.126 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0393.lzma.bak
2017-10-31T14:35:50.126Z,1509460550.126 [DataOverHttps](INFO): SBD MOMSN=5179157
2017-10-31T14:35:50.628Z,1509460550.628 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T14:35:50.628Z,1509460550.628 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T14:35:50.628Z,1509460550.628 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T14:35:57.214Z,1509460557.214 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002903
CHAN A1 (24V): -0.004189
CHAN A2 (12V): -0.002118
CHAN A3 (5V): 0.000365
CHAN B0 (3.3V): -0.000387
CHAN B1 (3.15aV): -0.000160
CHAN B2 (3.15bV): -0.000313
CHAN B3 (GND): 0.000235
OPEN: -0.000780
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:36:43.134Z,1509460603.134 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T14:36:58.573Z,1509460618.573 [BPC1](ERROR): Failed to receive battery data
2017-10-31T14:36:58.573Z,1509460618.573 [BPC1] Communications Fault, FailCount= 1
2017-10-31T14:36:58.573Z,1509460618.573 [BPC1](ERROR): Communications Fault
2017-10-31T14:36:58.623Z,1509460618.623 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T14:36:59.799Z,1509460619.799 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:36:59.799Z,1509460619.799 [BPC1] No Fault, FailCount= 1
2017-10-31T14:37:13.732Z,1509460633.732 [NAL9602](INFO): Powering down
2017-10-31T14:37:27.397Z,1509460647.397 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:37:38.621Z,1509460658.621 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134684
CHAN A1 (24V): -0.004148
CHAN A2 (12V): -0.001538
CHAN A3 (5V): 0.000323
CHAN B0 (3.3V): -0.000087
CHAN B1 (3.15aV): -0.000249
CHAN B2 (3.15bV): -0.000541
CHAN B3 (GND): 0.000650
OPEN: -0.000595
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:38:08.803Z,1509460688.803 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:38:08.803Z,1509460688.803 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-31T14:38:08.803Z,1509460688.803 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:38:08.829Z,1509460688.829 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:38:08.829Z,1509460688.829 [CBIT](FAULT): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:39:08.964Z,1509460748.964 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:39:19.796Z,1509460759.796 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.003762
CHAN A1 (24V): -0.003680
CHAN A2 (12V): -0.001885
CHAN A3 (5V): 0.000553
CHAN B0 (3.3V): -0.000251
CHAN B1 (3.15aV): -0.000223
CHAN B2 (3.15bV): -0.000319
CHAN B3 (GND): 0.000064
OPEN: -0.000362
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:40:03.519Z,1509460803.519 [BPC1](ERROR): Failed to receive battery data
2017-10-31T14:40:03.519Z,1509460803.519 [BPC1] Communications Fault, FailCount= 1
2017-10-31T14:40:03.519Z,1509460803.519 [BPC1](ERROR): Communications Fault
2017-10-31T14:40:03.567Z,1509460803.567 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T14:40:04.749Z,1509460804.749 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:40:04.749Z,1509460804.749 [BPC1] No Fault, FailCount= 1
2017-10-31T14:40:23.533Z,1509460823.533 [BPC1](ERROR): Failed to parse message.
2017-10-31T14:40:23.533Z,1509460823.533 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T14:40:23.533Z,1509460823.533 [BPC1] Data Fault, FailCount= 2
2017-10-31T14:40:23.533Z,1509460823.533 [BPC1](ERROR): Data Fault
2017-10-31T14:40:23.586Z,1509460823.586 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T14:40:24.750Z,1509460824.750 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:40:24.750Z,1509460824.750 [BPC1] No Fault, FailCount= 2
2017-10-31T14:40:49.950Z,1509460849.950 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:40:51.149Z,1509460851.149 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T14:40:51.150Z,1509460851.150 [Default:CheckIn:C.Wait] Stopped
2017-10-31T14:40:51.150Z,1509460851.150 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T14:40:51.150Z,1509460851.150 [Default:CheckIn:D] Running Loop=1
2017-10-31T14:40:51.547Z,1509460851.547 [Default:CheckIn:D] Stopped
2017-10-31T14:40:51.547Z,1509460851.547 [Default:CheckIn:E] Running Loop=1
2017-10-31T14:40:51.952Z,1509460851.952 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 963.730534 min 
2017-10-31T14:40:51.952Z,1509460851.952 [Default:CheckIn:E] Stopped
2017-10-31T14:40:51.953Z,1509460851.953 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T14:40:51.953Z,1509460851.953 [Default:CheckIn] Stopped
2017-10-31T14:40:51.953Z,1509460851.953 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T14:40:51.953Z,1509460851.953 [Default:CheckIn](INFO): Running loop #90
2017-10-31T14:40:51.953Z,1509460851.953 [Default:CheckIn] Running Loop=90
2017-10-31T14:40:51.953Z,1509460851.953 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T14:40:51.953Z,1509460851.953 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T14:40:55.662Z,1509460855.662 [NAL9602](INFO): Powering up
2017-10-31T14:41:03.742Z,1509460863.742 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134539
CHAN A1 (24V): -0.004839
CHAN A2 (12V): -0.002113
CHAN A3 (5V): 0.000448
CHAN B0 (3.3V): -0.000142
CHAN B1 (3.15aV): 0.000529
CHAN B2 (3.15bV): -0.000079
CHAN B3 (GND): -0.000221
OPEN: -0.000338
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:41:06.476Z,1509460866.476 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:41:07.278Z,1509460867.278 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T14:41:07.278Z,1509460867.278 [NAL9602] Data Fault, FailCount= 2
2017-10-31T14:41:07.278Z,1509460867.278 [NAL9602](ERROR): Data Fault
2017-10-31T14:41:07.402Z,1509460867.402 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T14:41:07.676Z,1509460867.676 [NAL9602](INFO): Powering down
2017-10-31T14:41:08.569Z,1509460868.569 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T14:41:08.569Z,1509460868.569 [NAL9602] No Fault, FailCount= 2
2017-10-31T14:41:24.927Z,1509460884.927 [PNI_TCM](ERROR): CRC does not match. Expected:0x7833 got:0x6978
2017-10-31T14:41:37.679Z,1509460897.679 [NAL9602](INFO): Powering up NAL9602
2017-10-31T14:41:48.871Z,1509460908.871 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:42:33.894Z,1509460953.894 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:42:44.694Z,1509460964.694 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002183
CHAN A1 (24V): -0.004901
CHAN A2 (12V): -0.002569
CHAN A3 (5V): 0.000818
CHAN B0 (3.3V): 0.000067
CHAN B1 (3.15aV): 0.000455
CHAN B2 (3.15bV): 0.000240
CHAN B3 (GND): -0.000348
OPEN: -0.000509
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:43:38.856Z,1509461018.856 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T14:44:14.696Z,1509461054.696 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:44:25.919Z,1509461065.919 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.133762
CHAN A1 (24V): -0.004506
CHAN A2 (12V): -0.002268
CHAN A3 (5V): 0.000403
CHAN B0 (3.3V): -0.000060
CHAN B1 (3.15aV): -0.000163
CHAN B2 (3.15bV): -0.000496
CHAN B3 (GND): 0.000286
OPEN: -0.000226
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:45:52.343Z,1509461152.343 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T14:40:51.0Z
2017-10-31T14:45:52.343Z,1509461152.343 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T14:45:52.344Z,1509461152.344 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T14:45:56.016Z,1509461156.016 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:45:56.093Z,1509461156.093 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0396.lzma
2017-10-31T14:45:56.865Z,1509461156.865 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0396.lzma.bak
2017-10-31T14:45:56.865Z,1509461156.865 [DataOverHttps](INFO): SBD MOMSN=5179173
2017-10-31T14:46:06.276Z,1509461166.276 [DataOverHttps](INFO): Sending 692 bytes from file Logs/20171030T210256/Express0397.lzma
2017-10-31T14:46:07.078Z,1509461167.078 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0397.lzma.bak
2017-10-31T14:46:07.078Z,1509461167.078 [DataOverHttps](INFO): SBD MOMSN=5179175
2017-10-31T14:46:07.556Z,1509461167.556 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T14:46:07.556Z,1509461167.556 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T14:46:07.556Z,1509461167.556 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T14:46:14.227Z,1509461174.227 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.002642
CHAN A1 (24V): -0.004182
CHAN A2 (12V): -0.002398
CHAN A3 (5V): 0.000459
CHAN B0 (3.3V): 0.000117
CHAN B1 (3.15aV): 0.000434
CHAN B2 (3.15bV): -0.000101
CHAN B3 (GND): 0.000664
OPEN: -0.000494
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:46:23.337Z,1509461183.337 [PNI_TCM](ERROR): CRC does not match. Expected:0x2553 got:0x97
2017-10-31T14:46:27.316Z,1509461187.316 [NAL9602](INFO): SBD MO Status=2, MOMSN=3326, MT Status=2, MTMSN=0
2017-10-31T14:46:27.317Z,1509461187.317 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-31T14:46:29.739Z,1509461189.739 [PNI_TCM](ERROR): CRC does not match. Expected:0x9002 got:0x0
2017-10-31T14:46:31.354Z,1509461191.354 [PNI_TCM](ERROR): CRC does not match. Expected:0x37094 got:0x9499
2017-10-31T14:46:34.561Z,1509461194.561 [PNI_TCM](ERROR): CRC does not match. Expected:0x47605 got:0x45113
2017-10-31T14:46:41.346Z,1509461201.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x47253 got:0x49152
2017-10-31T14:46:45.737Z,1509461205.737 [PNI_TCM](ERROR): CRC does not match. Expected:0x19189 got:0x10400
2017-10-31T14:46:48.937Z,1509461208.937 [PNI_TCM](ERROR): CRC does not match. Expected:0x6090 got:0x7360
2017-10-31T14:46:51.711Z,1509461211.711 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T14:46:52.132Z,1509461212.132 [PNI_TCM](ERROR): CRC does not match. Expected:0x11698 got:0x6978
2017-10-31T14:46:53.738Z,1509461213.738 [PNI_TCM](ERROR): CRC does not match. Expected:0x14866 got:0x45379
2017-10-31T14:46:55.339Z,1509461215.339 [PNI_TCM](ERROR): CRC does not match. Expected:0x11114 got:0x51169
2017-10-31T14:46:58.543Z,1509461218.543 [PNI_TCM](ERROR): CRC does not match. Expected:0x3477 got:0x49071
2017-10-31T14:47:01.730Z,1509461221.730 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-31T14:47:05.330Z,1509461225.330 [PNI_TCM](ERROR): CRC does not match. Expected:0x46162 got:0x7490
2017-10-31T14:47:08.140Z,1509461228.140 [PNI_TCM](ERROR): CRC does not match. Expected:0x11265 got:0x49329
2017-10-31T14:47:22.310Z,1509461242.310 [NAL9602](INFO): Powering down
2017-10-31T14:47:44.384Z,1509461264.384 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:47:55.189Z,1509461275.189 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): 0.004000
CHAN A1 (24V): -0.002935
CHAN A2 (12V): -0.002356
CHAN A3 (5V): 0.000257
CHAN B0 (3.3V): 0.000094
CHAN B1 (3.15aV): 0.000280
CHAN B2 (3.15bV): -0.000104
CHAN B3 (GND): 0.000452
OPEN: -0.000421
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:48:39.838Z,1509461319.838 [BPC1](ERROR): Failed to parse message.
2017-10-31T14:48:39.838Z,1509461319.838 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-31T14:48:39.838Z,1509461319.838 [BPC1] Data Fault, FailCount= 1
2017-10-31T14:48:39.838Z,1509461319.838 [BPC1](ERROR): Data Fault
2017-10-31T14:48:39.885Z,1509461319.885 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T14:48:41.095Z,1509461321.095 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:48:41.095Z,1509461321.095 [BPC1] No Fault, FailCount= 1
2017-10-31T14:49:25.492Z,1509461365.492 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:49:36.268Z,1509461376.268 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134578
CHAN A1 (24V): -0.003732
CHAN A2 (12V): -0.002447
CHAN A3 (5V): 0.000553
CHAN B0 (3.3V): -0.000009
CHAN B1 (3.15aV): 0.000046
CHAN B2 (3.15bV): -0.000054
CHAN B3 (GND): 0.000595
OPEN: -0.000769
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:49:49.817Z,1509461389.817 [BPC1](ERROR): Failed to receive battery data
2017-10-31T14:49:49.818Z,1509461389.818 [BPC1] Communications Fault, FailCount= 1
2017-10-31T14:49:49.818Z,1509461389.818 [BPC1](ERROR): Communications Fault
2017-10-31T14:49:49.856Z,1509461389.856 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T14:49:51.057Z,1509461391.057 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:49:51.057Z,1509461391.057 [BPC1] No Fault, FailCount= 1
2017-10-31T14:51:06.496Z,1509461466.496 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:51:08.062Z,1509461468.062 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T14:51:08.062Z,1509461468.062 [Default:CheckIn:C.Wait] Stopped
2017-10-31T14:51:08.062Z,1509461468.062 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T14:51:08.062Z,1509461468.062 [Default:CheckIn:D] Running Loop=1
2017-10-31T14:51:08.476Z,1509461468.476 [Default:CheckIn:D] Stopped
2017-10-31T14:51:08.476Z,1509461468.476 [Default:CheckIn:E] Running Loop=1
2017-10-31T14:51:08.845Z,1509461468.845 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 974.012695 min 
2017-10-31T14:51:08.846Z,1509461468.846 [Default:CheckIn:E] Stopped
2017-10-31T14:51:08.846Z,1509461468.846 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T14:51:08.846Z,1509461468.846 [Default:CheckIn] Stopped
2017-10-31T14:51:08.846Z,1509461468.846 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T14:51:08.846Z,1509461468.846 [Default:CheckIn](INFO): Running loop #91
2017-10-31T14:51:08.846Z,1509461468.846 [Default:CheckIn] Running Loop=91
2017-10-31T14:51:08.846Z,1509461468.846 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T14:51:08.847Z,1509461468.847 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T14:51:12.547Z,1509461472.547 [NAL9602](INFO): Powering up
2017-10-31T14:51:19.620Z,1509461479.620 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.003069
CHAN A1 (24V): -0.009756
CHAN A2 (12V): -0.002029
CHAN A3 (5V): 0.000417
CHAN B0 (3.3V): -0.000102
CHAN B1 (3.15aV): 0.000239
CHAN B2 (3.15bV): -0.000499
CHAN B3 (GND): -0.000513
OPEN: -0.000414
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:51:23.508Z,1509461483.508 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:51:55.117Z,1509461515.117 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T14:51:55.200Z,1509461515.200 [NAL9602](FAULT): received: 
+CSQ:0

OK26, 2, 0, 0, 0

OK
2017-10-31T14:51:55.200Z,1509461515.200 [NAL9602] Data Fault, FailCount= 3
2017-10-31T14:51:55.200Z,1509461515.200 [NAL9602](ERROR): Data Fault
2017-10-31T14:51:55.286Z,1509461515.286 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T14:51:55.499Z,1509461515.499 [NAL9602](INFO): Powering down
2017-10-31T14:51:56.385Z,1509461516.385 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T14:51:56.385Z,1509461516.385 [NAL9602] No Fault, FailCount= 3
2017-10-31T14:52:25.767Z,1509461545.767 [NAL9602](INFO): Powering up NAL9602
2017-10-31T14:52:36.577Z,1509461556.577 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:52:37.378Z,1509461557.378 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T14:52:37.378Z,1509461557.378 [NAL9602] Data Fault, FailCount= 4
2017-10-31T14:52:37.378Z,1509461557.378 [NAL9602](ERROR): Data Fault
2017-10-31T14:52:37.460Z,1509461557.460 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T14:52:37.766Z,1509461557.766 [NAL9602](INFO): Powering down
2017-10-31T14:52:38.650Z,1509461558.650 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T14:52:38.650Z,1509461558.650 [NAL9602] No Fault, FailCount= 4
2017-10-31T14:52:49.834Z,1509461569.834 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:53:00.627Z,1509461580.627 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.128589
CHAN A1 (24V): -0.009659
CHAN A2 (12V): -0.002235
CHAN A3 (5V): 0.000039
CHAN B0 (3.3V): -0.000381
CHAN B1 (3.15aV): -0.000316
CHAN B2 (3.15bV): -0.000069
CHAN B3 (GND): 0.000187
OPEN: -0.000729
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:53:07.768Z,1509461587.768 [NAL9602](INFO): Powering up NAL9602
2017-10-31T14:53:09.049Z,1509461589.049 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:53:09.050Z,1509461589.050 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-31T14:53:09.482Z,1509461589.482 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:53:09.482Z,1509461589.482 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:53:09.482Z,1509461589.482 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:53:18.890Z,1509461598.890 [NAL9602](INFO): NAL9602 initialized
2017-10-31T14:53:38.972Z,1509461618.972 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T14:54:30.748Z,1509461670.748 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:54:41.524Z,1509461681.524 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.002888
CHAN A1 (24V): -0.009969
CHAN A2 (12V): -0.002474
CHAN A3 (5V): 0.000688
CHAN B0 (3.3V): 0.000544
CHAN B1 (3.15aV): 0.000466
CHAN B2 (3.15bV): -0.001000
CHAN B3 (GND): 0.000202
OPEN: -0.000330
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:55:04.686Z,1509461704.686 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-31T14:55:04.686Z,1509461704.686 [BPC1] Data Fault, FailCount= 1
2017-10-31T14:55:04.686Z,1509461704.686 [BPC1](ERROR): Data Fault
2017-10-31T14:55:04.767Z,1509461704.767 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-31T14:55:05.938Z,1509461705.938 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:55:05.938Z,1509461705.938 [BPC1] No Fault, FailCount= 1
2017-10-31T14:56:08.880Z,1509461768.880 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-10-31T14:51:08.8Z
2017-10-31T14:56:08.880Z,1509461768.880 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T14:56:08.881Z,1509461768.881 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-31T14:56:09.694Z,1509461769.694 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:56:09.694Z,1509461769.694 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-31T14:56:09.694Z,1509461769.694 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:56:09.708Z,1509461769.708 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:56:10.091Z,1509461770.091 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:56:10.092Z,1509461770.092 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-31T14:56:13.604Z,1509461773.604 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:56:13.604Z,1509461773.604 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:56:13.609Z,1509461773.609 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:56:13.664Z,1509461773.664 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:56:13.705Z,1509461773.705 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20171030T210256/Courier0400.lzma
2017-10-31T14:56:14.494Z,1509461774.494 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Courier0400.lzma.bak
2017-10-31T14:56:14.494Z,1509461774.494 [DataOverHttps](INFO): SBD MOMSN=5179193
2017-10-31T14:56:14.526Z,1509461774.526 [BPC1](ERROR): Failed to receive battery data
2017-10-31T14:56:14.526Z,1509461774.526 [BPC1] Communications Fault, FailCount= 1
2017-10-31T14:56:14.526Z,1509461774.526 [BPC1](ERROR): Communications Fault
2017-10-31T14:56:14.569Z,1509461774.569 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-31T14:56:18.728Z,1509461778.728 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-31T14:56:18.728Z,1509461778.728 [BPC1] No Fault, FailCount= 1
2017-10-31T14:56:24.089Z,1509461784.089 [DataOverHttps](INFO): Sending 679 bytes from file Logs/20171030T210256/Express0401.lzma
2017-10-31T14:56:24.894Z,1509461784.894 [DataOverHttps](INFO): Moved sent file to Logs/20171030T210256/Express0401.lzma.bak
2017-10-31T14:56:24.894Z,1509461784.894 [DataOverHttps](INFO): SBD MOMSN=5179195
2017-10-31T14:56:25.421Z,1509461785.421 [Default:CheckIn:Read_Iridium] Stopped
2017-10-31T14:56:25.421Z,1509461785.421 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-31T14:56:25.421Z,1509461785.421 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-31T14:56:29.499Z,1509461789.499 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-31T14:56:32.581Z,1509461792.581 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.128688
CHAN A1 (24V): -0.009838
CHAN A2 (12V): -0.002366
CHAN A3 (5V): -0.000095
CHAN B0 (3.3V): -0.000266
CHAN B1 (3.15aV): -0.000299
CHAN B2 (3.15bV): -0.000113
CHAN B3 (GND): -0.000182
OPEN: -0.000345
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:56:34.546Z,1509461794.546 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-31T14:56:34.951Z,1509461794.951 [PNI_TCM](ERROR): CRC does not match. Expected:0x11344 got:0x42779
2017-10-31T14:56:40.951Z,1509461800.951 [PNI_TCM](ERROR): CRC does not match. Expected:0x3808 got:0x17945
2017-10-31T14:56:48.950Z,1509461808.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x63084 got:0x24344
2017-10-31T14:56:51.346Z,1509461811.346 [PNI_TCM](ERROR): CRC does not match. Expected:0x27253 got:0x1857
2017-10-31T14:56:59.715Z,1509461819.715 [NAL9602](INFO): Powering down
2017-10-31T14:57:11.349Z,1509461831.349 [PNI_TCM](ERROR): CRC does not match. Expected:0x4767 got:0x17304
2017-10-31T14:57:11.757Z,1509461831.757 [PNI_TCM](ERROR): CRC does not match. Expected:0x32549 got:0x1857
2017-10-31T14:57:14.548Z,1509461834.548 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-31T14:57:14.950Z,1509461834.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x271 got:0x7490
2017-10-31T14:57:24.152Z,1509461844.152 [PNI_TCM](ERROR): CRC does not match. Expected:0x42013 got:0x30292
2017-10-31T14:58:02.778Z,1509461882.778 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:58:13.582Z,1509461893.582 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.002828
CHAN A1 (24V): -0.009704
CHAN A2 (12V): -0.002251
CHAN A3 (5V): 0.000083
CHAN B0 (3.3V): -0.000216
CHAN B1 (3.15aV): -0.000051
CHAN B2 (3.15bV): -0.000554
CHAN B3 (GND): 0.000235
OPEN: -0.000573
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T14:59:13.607Z,1509461953.607 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T14:59:13.607Z,1509461953.607 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-31T14:59:13.607Z,1509461953.607 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T14:59:13.653Z,1509461953.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T14:59:14.067Z,1509461954.067 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T14:59:14.067Z,1509461954.067 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-31T14:59:14.395Z,1509461954.395 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T14:59:14.395Z,1509461954.395 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T14:59:14.396Z,1509461954.396 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T14:59:43.938Z,1509461983.938 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T14:59:54.707Z,1509461994.707 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.128530
CHAN A1 (24V): -0.009745
CHAN A2 (12V): -0.002454
CHAN A3 (5V): 0.000080
CHAN B0 (3.3V): -0.000183
CHAN B1 (3.15aV): 0.000423
CHAN B2 (3.15bV): -0.000460
CHAN B3 (GND): 0.000167
OPEN: -0.000345
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T15:01:25.053Z,1509462085.053 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T15:01:25.830Z,1509462085.830 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-31T15:01:25.831Z,1509462085.831 [Default:CheckIn:C.Wait] Stopped
2017-10-31T15:01:25.831Z,1509462085.831 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-31T15:01:25.831Z,1509462085.831 [Default:CheckIn:D] Running Loop=1
2017-10-31T15:01:26.239Z,1509462086.239 [Default:CheckIn:D] Stopped
2017-10-31T15:01:26.239Z,1509462086.239 [Default:CheckIn:E] Running Loop=1
2017-10-31T15:01:26.640Z,1509462086.640 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 984.308724 min 
2017-10-31T15:01:26.640Z,1509462086.640 [Default:CheckIn:E] Stopped
2017-10-31T15:01:26.640Z,1509462086.640 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-31T15:01:26.641Z,1509462086.641 [Default:CheckIn] Stopped
2017-10-31T15:01:26.641Z,1509462086.641 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T15:01:26.641Z,1509462086.641 [Default:CheckIn](INFO): Running loop #92
2017-10-31T15:01:26.641Z,1509462086.641 [Default:CheckIn] Running Loop=92
2017-10-31T15:01:26.641Z,1509462086.641 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-31T15:01:26.641Z,1509462086.641 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-31T15:01:30.247Z,1509462090.247 [NAL9602](INFO): Powering up
2017-10-31T15:01:38.513Z,1509462098.513 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.002934
CHAN A1 (24V): -0.010042
CHAN A2 (12V): -0.001788
CHAN A3 (5V): 0.000212
CHAN B0 (3.3V): 0.000134
CHAN B1 (3.15aV): -0.000578
CHAN B2 (3.15bV): -0.000676
CHAN B3 (GND): -0.000007
OPEN: -0.000627
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T15:01:41.234Z,1509462101.234 [NAL9602](INFO): NAL9602 initialized
2017-10-31T15:02:13.233Z,1509462133.233 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-31T15:02:13.754Z,1509462133.754 [NAL9602](FAULT): received: 
2017-10-31T15:02:13.754Z,1509462133.754 [NAL9602] Data Fault, FailCount= 5
2017-10-31T15:02:13.754Z,1509462133.754 [NAL9602](ERROR): Data Fault
2017-10-31T15:02:13.843Z,1509462133.843 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T15:02:13.844Z,1509462133.844 [CBIT](CRITICAL): Data Fault in component: NAL9602
2017-10-31T15:02:13.926Z,1509462133.926 [NAL9602](INFO): Powering down
2017-10-31T15:02:14.013Z,1509462134.013 [CBIT](INFO): Critical error at 20171031T150213
2017-10-31T15:02:14.707Z,1509462134.707 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T15:02:14.707Z,1509462134.707 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-31T15:02:14.707Z,1509462134.707 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T15:02:14.720Z,1509462134.720 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T15:02:15.145Z,1509462135.145 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T15:02:15.145Z,1509462135.145 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-31T15:02:15.514Z,1509462135.514 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T15:02:15.515Z,1509462135.515 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T15:02:15.515Z,1509462135.515 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T15:03:08.843Z,1509462188.843 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T15:03:19.669Z,1509462199.669 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.129042
CHAN A1 (24V): -0.009750
CHAN A2 (12V): -0.002042
CHAN A3 (5V): 0.000310
CHAN B0 (3.3V): -0.000110
CHAN B1 (3.15aV): -0.000199
CHAN B2 (3.15bV): -0.000902
CHAN B3 (GND): 0.000276
OPEN: -0.000429
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T15:03:39.320Z,1509462219.320 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-31T15:04:14.156Z,1509462254.156 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T15:04:14.156Z,1509462254.156 [NAL9602] No Fault, FailCount= 5
2017-10-31T15:04:14.454Z,1509462254.454 [NAL9602](INFO): Powering up NAL9602
2017-10-31T15:04:25.255Z,1509462265.255 [NAL9602](INFO): NAL9602 initialized
2017-10-31T15:04:26.061Z,1509462266.061 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-31T15:04:26.061Z,1509462266.061 [NAL9602] Data Fault, FailCount= 1
2017-10-31T15:04:26.061Z,1509462266.061 [NAL9602](ERROR): Data Fault
2017-10-31T15:04:26.173Z,1509462266.173 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-31T15:04:26.453Z,1509462266.453 [NAL9602](INFO): Powering down
2017-10-31T15:04:27.321Z,1509462267.321 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-31T15:04:27.321Z,1509462267.321 [NAL9602] No Fault, FailCount= 1
2017-10-31T15:04:49.688Z,1509462289.688 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-31T15:04:56.799Z,1509462296.799 [NAL9602](INFO): Powering up NAL9602
2017-10-31T15:05:00.488Z,1509462300.488 [CBIT](IMPORTANT): No ground fault detected
mA:
CHAN A0 (Batt): -0.002870
CHAN A1 (24V): -0.010056
CHAN A2 (12V): -0.002477
CHAN A3 (5V): 0.000407
CHAN B0 (3.3V): 0.000008
CHAN B1 (3.15aV): -0.000007
CHAN B2 (3.15bV): -0.000098
CHAN B3 (GND): -0.000035
OPEN: -0.000341
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-31T15:05:07.991Z,1509462307.991 [NAL9602](INFO): NAL9602 initialized
2017-10-31T15:05:15.650Z,1509462315.650 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-31T15:05:15.651Z,1509462315.651 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-31T15:05:15.651Z,1509462315.651 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-31T15:05:15.672Z,1509462315.672 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-31T15:05:16.061Z,1509462316.061 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-31T15:05:16.062Z,1509462316.062 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-31T15:05:16.451Z,1509462316.451 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-31T15:05:16.455Z,1509462316.455 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-31T15:05:16.456Z,1509462316.456 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-31T15:05:31.905Z,1509462331.905 [DataOverHttps](IMPORTANT): SBD MTMSN=20171031T150528
2017-10-31T15:05:36.095Z,1509462336.095 [DataOverHttps](INFO): Received command:restart app
2017-10-31T15:05:36.187Z,1509462336.187 [CommandLine](IMPORTANT): got command restart application
2017-10-31T15:05:37.199Z,1509462337.199 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2017-10-31T15:05:37.200Z,1509462337.200 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:37.252Z,1509462337.252 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2017-10-31T15:05:37.252Z,1509462337.252 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:37.253Z,1509462337.253 [CommandLine](INFO): Join timeout helper Thread ID is 3502
2017-10-31T15:05:37.256Z,1509462337.256 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2017-10-31T15:05:37.256Z,1509462337.256 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:37.257Z,1509462337.257 [NavChartDb](INFO): Join timeout helper Thread ID is 3503
2017-10-31T15:05:37.629Z,1509462337.629 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2017-10-31T15:05:37.629Z,1509462337.629 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:37.649Z,1509462337.649 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2017-10-31T15:05:37.649Z,1509462337.649 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:37.649Z,1509462337.649 [Radio_Surface](INFO): Join timeout helper Thread ID is 3504
2017-10-31T15:05:38.001Z,1509462338.001 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2017-10-31T15:05:38.002Z,1509462338.002 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.007Z,1509462338.007 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2017-10-31T15:05:38.007Z,1509462338.007 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.007Z,1509462338.007 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 3505
2017-10-31T15:05:38.182Z,1509462338.182 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2017-10-31T15:05:38.182Z,1509462338.182 [WetLabsBB2FL](INFO): Powering down
2017-10-31T15:05:38.183Z,1509462338.183 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.185Z,1509462338.185 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2017-10-31T15:05:38.186Z,1509462338.186 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.186Z,1509462338.186 [CTD_Seabird](INFO): Join timeout helper Thread ID is 3506
2017-10-31T15:05:38.222Z,1509462338.222 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2017-10-31T15:05:38.321Z,1509462338.321 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-10-31T15:05:38.321Z,1509462338.321 [CTD_Seabird](INFO): Powering down
2017-10-31T15:05:38.322Z,1509462338.322 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.339Z,1509462338.339 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2017-10-31T15:05:38.339Z,1509462338.339 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.340Z,1509462338.340 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 3508
2017-10-31T15:05:38.574Z,1509462338.574 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2017-10-31T15:05:38.575Z,1509462338.575 [CTD_NeilBrown](INFO): Powering down
2017-10-31T15:05:38.576Z,1509462338.576 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.583Z,1509462338.583 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2017-10-31T15:05:38.583Z,1509462338.583 [logger ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.584Z,1509462338.584 [logger](INFO): Join timeout helper Thread ID is 3509
2017-10-31T15:05:38.610Z,1509462338.610 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2017-10-31T15:05:38.611Z,1509462338.611 [logger ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.623Z,1509462338.623 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2017-10-31T15:05:38.623Z,1509462338.623 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.623Z,1509462338.623 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2017-10-31T15:05:38.623Z,1509462338.623 [controlThread ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:38.624Z,1509462338.624 [controlThread](INFO): Join timeout helper Thread ID is 3510
2017-10-31T15:05:38.843Z,1509462338.843 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2017-10-31T15:05:38.843Z,1509462338.843 [controlThread](DEBUG): Uninitializing ControlThread
2017-10-31T15:05:38.843Z,1509462338.843 [Aanderaa_O2](INFO): Powering down
2017-10-31T15:05:38.846Z,1509462338.846 [NAL9602](INFO): Powering down
2017-10-31T15:05:38.847Z,1509462338.847 [PNI_TCM](INFO): Powering down
2017-10-31T15:05:38.936Z,1509462338.936 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-10-31T15:05:38.937Z,1509462338.937 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2017-10-31T15:05:38.938Z,1509462338.938 [MissionManager](INFO): Uninitializing Mission Default
2017-10-31T15:05:38.939Z,1509462338.939 [Default] Stopped
2017-10-31T15:05:38.939Z,1509462338.939 [Default](DEBUG): Aggregate::uninitialize Default
2017-10-31T15:05:38.939Z,1509462338.939 [Default:B.GoToSurface] Stopped
2017-10-31T15:05:38.939Z,1509462338.939 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-10-31T15:05:38.939Z,1509462338.939 [Default:CheckIn] Stopped
2017-10-31T15:05:38.939Z,1509462338.939 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-31T15:05:38.939Z,1509462338.939 [Default:CheckIn:Read_GPS] Stopped
2017-10-31T15:05:38.943Z,1509462338.943 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2017-10-31T15:05:38.943Z,1509462338.943 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2017-10-31T15:05:38.943Z,1509462338.943 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2017-10-31T15:05:38.944Z,1509462338.944 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2017-10-31T15:05:38.944Z,1509462338.944 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-10-31T15:05:38.944Z,1509462338.944 [BuoyancyServo](INFO): Powering down
2017-10-31T15:05:38.959Z,1509462338.959 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2017-10-31T15:05:38.959Z,1509462338.959 [ElevatorServo](INFO): Powering down
2017-10-31T15:05:38.960Z,1509462338.960 [MassServo](DEBUG): Uninitialize Mass Servo.
2017-10-31T15:05:38.960Z,1509462338.960 [MassServo](INFO): Powering down
2017-10-31T15:05:38.961Z,1509462338.961 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2017-10-31T15:05:38.961Z,1509462338.961 [RudderServo](INFO): Powering down
2017-10-31T15:05:38.962Z,1509462338.962 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2017-10-31T15:05:38.962Z,1509462338.962 [ThrusterServo](INFO): Powering down
2017-10-31T15:05:38.963Z,1509462338.963 [SBIT](DEBUG): Uninitialize SBIT Component.
2017-10-31T15:05:38.963Z,1509462338.963 [IBIT](DEBUG): Uninitialize IBIT Component.
2017-10-31T15:05:38.964Z,1509462338.964 [CBIT](DEBUG): Uninitialize CBIT Component.
2017-10-31T15:05:38.965Z,1509462338.965 [controlThread ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:39.084Z,1509462339.084 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:39.089Z,1509462339.089 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:39.099Z,1509462339.099 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:39.165Z,1509462339.165 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:39.210Z,1509462339.210 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-10-31T15:05:39.278Z,1509462339.278 [logger ThreadHandler](INFO): Thread cancelled.