2017-09-19T19:34:49.862Z,1505849689.862 [Supervisor](DEBUG): Initializing supervisor.
2017-09-19T19:34:49.866Z,1505849689.866 [SyncHandler](DEBUG): Created PCaller Thread at 4051A4E0
2017-09-19T19:34:49.867Z,1505849689.867 [SyncHandler](INFO): Protected caller Thread ID is 901
2017-09-19T19:34:49.868Z,1505849689.868 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-09-19T19:34:49.869Z,1505849689.869 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4054A4E0
2017-09-19T19:34:49.870Z,1505849689.870 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 902
2017-09-19T19:34:49.874Z,1505849689.874 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-09-19T19:34:49.888Z,1505849689.888 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-09-19T19:34:49.890Z,1505849689.890 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4057A4E0
2017-09-19T19:34:49.890Z,1505849689.890 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 903
2017-09-19T19:34:49.891Z,1505849689.891 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-09-19T19:34:49.892Z,1505849689.892 [logger ThreadHandler](DEBUG): Created PCaller Thread at 405AA4E0
2017-09-19T19:34:49.892Z,1505849689.892 [logger ThreadHandler](INFO): Protected caller Thread ID is 904
2017-09-19T19:34:49.895Z,1505849689.895 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-09-19T19:34:49.895Z,1505849689.895 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-09-19T19:34:49.897Z,1505849689.897 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-09-19T19:34:50.100Z,1505849690.100 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-09-19T19:34:50.101Z,1505849690.101 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-09-19T19:34:50.243Z,1505849690.243 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-09-19T19:34:50.244Z,1505849690.244 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-09-19T19:34:50.627Z,1505849690.627 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-09-19T19:34:50.627Z,1505849690.627 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-09-19T19:34:50.780Z,1505849690.780 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-09-19T19:34:50.780Z,1505849690.780 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-09-19T19:34:50.865Z,1505849690.865 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-09-19T19:34:51.089Z,1505849691.089 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-09-19T19:34:51.090Z,1505849691.090 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-09-19T19:34:51.200Z,1505849691.200 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-09-19T19:34:51.201Z,1505849691.201 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-09-19T19:34:51.534Z,1505849691.534 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-09-19T19:34:51.535Z,1505849691.535 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-09-19T19:34:51.960Z,1505849691.960 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-09-19T19:34:51.961Z,1505849691.961 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-09-19T19:34:52.315Z,1505849692.315 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-09-19T19:34:52.315Z,1505849692.315 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-09-19T19:34:52.928Z,1505849692.928 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-09-19T19:34:52.929Z,1505849692.929 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-09-19T19:34:53.143Z,1505849693.143 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-09-19T19:34:53.143Z,1505849693.143 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-09-19T19:34:53.251Z,1505849693.251 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-09-19T19:34:53.252Z,1505849693.252 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-09-19T19:34:53.823Z,1505849693.823 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-09-19T19:34:53.824Z,1505849693.824 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-09-19T19:34:54.092Z,1505849694.092 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-09-19T19:34:54.094Z,1505849694.094 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2017-09-19T19:34:54.095Z,1505849694.095 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2017-09-19T19:34:54.394Z,1505849694.394 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-09-19T19:34:54.395Z,1505849694.395 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2017-09-19T19:34:54.503Z,1505849694.503 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2017-09-19T19:34:54.599Z,1505849694.599 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2017-09-19T19:34:54.709Z,1505849694.709 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2017-09-19T19:34:54.801Z,1505849694.801 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2017-09-19T19:34:54.940Z,1505849694.940 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2017-09-19T19:34:55.112Z,1505849695.112 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2017-09-19T19:34:55.215Z,1505849695.215 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2017-09-19T19:34:55.313Z,1505849695.313 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2017-09-19T19:34:55.401Z,1505849695.401 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2017-09-19T19:34:55.600Z,1505849695.600 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2017-09-19T19:34:55.682Z,1505849695.682 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/root/
2017-09-19T19:34:55.682Z,1505849695.682 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2017-09-19T19:34:55.690Z,1505849695.690 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-09-19T19:34:55.815Z,1505849695.815 [SBIT](DEBUG): Construct Startup Built In Test.
2017-09-19T19:34:55.852Z,1505849695.852 [SBIT] Loaded
2017-09-19T19:34:55.852Z,1505849695.852 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-09-19T19:34:55.853Z,1505849695.853 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-09-19T19:34:55.888Z,1505849695.888 [IBIT] Loaded
2017-09-19T19:34:55.888Z,1505849695.888 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-09-19T19:34:55.893Z,1505849695.893 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-09-19T19:34:56.089Z,1505849696.089 [CBIT] Loaded
2017-09-19T19:34:56.089Z,1505849696.089 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-09-19T19:34:56.089Z,1505849696.089 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-09-19T19:34:56.090Z,1505849696.090 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-09-19T19:34:56.157Z,1505849696.157 [VerticalControl](DEBUG): Construct VerticalControl.
2017-09-19T19:34:56.277Z,1505849696.277 [VerticalControl] Loaded
2017-09-19T19:34:56.278Z,1505849696.278 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-09-19T19:34:56.279Z,1505849696.279 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-09-19T19:34:56.356Z,1505849696.356 [HorizontalControl] Loaded
2017-09-19T19:34:56.357Z,1505849696.357 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-09-19T19:34:56.358Z,1505849696.358 [SpeedControl](DEBUG): Construct SpeedControl.
2017-09-19T19:34:56.365Z,1505849696.365 [SpeedControl] Loaded
2017-09-19T19:34:56.365Z,1505849696.365 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-09-19T19:34:56.366Z,1505849696.366 [LoopControl](DEBUG): Construct LoopControl.
2017-09-19T19:34:56.366Z,1505849696.366 [LoopControl] Loaded
2017-09-19T19:34:56.367Z,1505849696.367 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-09-19T19:34:56.367Z,1505849696.367 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-09-19T19:34:56.368Z,1505849696.368 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-09-19T19:34:56.394Z,1505849696.394 [DepthRateCalculator] Loaded
2017-09-19T19:34:56.394Z,1505849696.394 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-09-19T19:34:56.401Z,1505849696.401 [PitchRateCalculator] Loaded
2017-09-19T19:34:56.401Z,1505849696.401 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-09-19T19:34:56.420Z,1505849696.420 [SpeedCalculator] Loaded
2017-09-19T19:34:56.420Z,1505849696.420 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-09-19T19:34:56.446Z,1505849696.446 [TempGradientCalculator] Loaded
2017-09-19T19:34:56.446Z,1505849696.446 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-09-19T19:34:56.465Z,1505849696.465 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-09-19T19:34:56.466Z,1505849696.466 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-09-19T19:34:56.472Z,1505849696.472 [YawRateCalculator] Loaded
2017-09-19T19:34:56.472Z,1505849696.472 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-09-19T19:34:56.473Z,1505849696.473 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-09-19T19:34:56.473Z,1505849696.473 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-09-19T19:34:56.559Z,1505849696.559 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-09-19T19:34:56.559Z,1505849696.559 [StratificationFrontDetector](DEBUG): (re)initializing
2017-09-19T19:34:56.560Z,1505849696.560 [StratificationFrontDetector] Loaded
2017-09-19T19:34:56.560Z,1505849696.560 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-09-19T19:34:56.561Z,1505849696.561 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-09-19T19:34:56.561Z,1505849696.561 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-09-19T19:34:56.791Z,1505849696.791 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-09-19T19:34:56.791Z,1505849696.792 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-09-19T19:34:56.904Z,1505849696.904 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-09-19T19:34:56.904Z,1505849696.904 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-09-19T19:34:56.973Z,1505849696.973 [DeadReckonUsingSpeedCalculator] Loaded
2017-09-19T19:34:56.973Z,1505849696.973 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-09-19T19:34:56.994Z,1505849696.994 [NavChart] Loaded
2017-09-19T19:34:56.995Z,1505849696.995 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-09-19T19:34:57.000Z,1505849697.000 [UniversalFixResidualReporter] Loaded
2017-09-19T19:34:57.001Z,1505849697.001 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-09-19T19:34:57.001Z,1505849697.001 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-09-19T19:34:57.002Z,1505849697.002 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-09-19T19:34:57.015Z,1505849697.015 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-09-19T19:34:57.016Z,1505849697.016 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-09-19T19:34:57.164Z,1505849697.164 [Aanderaa_O2] Loaded
2017-09-19T19:34:57.165Z,1505849697.165 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-09-19T19:34:57.270Z,1505849697.270 [CTD_NeilBrown] Loaded
2017-09-19T19:34:57.271Z,1505849697.271 [ComponentRegistry](DEBUG): Component "CTD_NeilBrown" handled in its own thread.
2017-09-19T19:34:57.272Z,1505849697.272 [CTD_NeilBrown ThreadHandler](DEBUG): Created PCaller Thread at 408134E0
2017-09-19T19:34:57.272Z,1505849697.272 [CTD_NeilBrown ThreadHandler](INFO): Protected caller Thread ID is 986
2017-09-19T19:34:57.316Z,1505849697.316 [CTD_Seabird] Loaded
2017-09-19T19:34:57.316Z,1505849697.316 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-09-19T19:34:57.318Z,1505849697.318 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 408434E0
2017-09-19T19:34:57.318Z,1505849697.318 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 987
2017-09-19T19:34:57.337Z,1505849697.337 [PAR_Licor] Loaded
2017-09-19T19:34:57.337Z,1505849697.337 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-09-19T19:34:57.395Z,1505849697.395 [WetLabsBB2FL] Loaded
2017-09-19T19:34:57.395Z,1505849697.395 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-09-19T19:34:57.396Z,1505849697.396 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 408734E0
2017-09-19T19:34:57.397Z,1505849697.397 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 988
2017-09-19T19:34:57.397Z,1505849697.397 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-09-19T19:34:57.398Z,1505849697.398 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-09-19T19:34:57.669Z,1505849697.669 [DataOverHttps] Loaded
2017-09-19T19:34:57.669Z,1505849697.669 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-09-19T19:34:57.686Z,1505849697.686 [Depth_Keller] Loaded
2017-09-19T19:34:57.686Z,1505849697.686 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-09-19T19:34:57.692Z,1505849697.692 [DropWeight] Loaded
2017-09-19T19:34:57.693Z,1505849697.693 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-09-19T19:34:57.805Z,1505849697.805 [NAL9602] Loaded
2017-09-19T19:34:57.806Z,1505849697.806 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-09-19T19:34:57.817Z,1505849697.817 [Onboard] Loaded
2017-09-19T19:34:57.817Z,1505849697.817 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-09-19T19:34:57.826Z,1505849697.826 [Radio_Surface] Loaded
2017-09-19T19:34:57.826Z,1505849697.826 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-09-19T19:34:57.828Z,1505849697.828 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 40AF74E0
2017-09-19T19:34:57.828Z,1505849697.828 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 989
2017-09-19T19:34:58.000Z,1505849698.000 [DAT] Loaded
2017-09-19T19:34:58.001Z,1505849698.001 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2017-09-19T19:34:58.058Z,1505849698.058 [PNI_TCM] Loaded
2017-09-19T19:34:58.058Z,1505849698.058 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-09-19T19:34:58.132Z,1505849698.132 [Rowe_600LCM] Loaded
2017-09-19T19:34:58.133Z,1505849698.133 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-09-19T19:34:58.134Z,1505849698.134 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 40B274E0
2017-09-19T19:34:58.134Z,1505849698.134 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 990
2017-09-19T19:35:00.641Z,1505849700.641 [BPC1] Loaded
2017-09-19T19:35:00.642Z,1505849700.642 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-09-19T19:35:00.642Z,1505849700.642 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-09-19T19:35:00.643Z,1505849700.643 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-09-19T19:35:00.745Z,1505849700.745 [BuoyancyServo] Loaded
2017-09-19T19:35:00.746Z,1505849700.746 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-09-19T19:35:00.761Z,1505849700.761 [ElevatorServo] Loaded
2017-09-19T19:35:00.761Z,1505849700.761 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-09-19T19:35:00.776Z,1505849700.776 [MassServo] Loaded
2017-09-19T19:35:00.776Z,1505849700.776 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-09-19T19:35:00.791Z,1505849700.791 [RudderServo] Loaded
2017-09-19T19:35:00.791Z,1505849700.791 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-09-19T19:35:00.806Z,1505849700.806 [ThrusterServo] Loaded
2017-09-19T19:35:00.806Z,1505849700.806 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-09-19T19:35:00.806Z,1505849700.806 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-09-19T19:35:00.807Z,1505849700.807 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-09-19T19:35:00.906Z,1505849700.906 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-09-19T19:35:00.906Z,1505849700.906 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-09-19T19:35:00.932Z,1505849700.932 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-09-19T19:35:00.937Z,1505849700.937 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-09-19T19:35:00.938Z,1505849700.938 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-09-19T19:35:00.949Z,1505849700.949 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-09-19T19:35:00.950Z,1505849700.950 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40BFB4E0
2017-09-19T19:35:00.950Z,1505849700.950 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 991
2017-09-19T19:35:00.957Z,1505849700.957 [Supervisor](INFO): Main Thread ID is 765
2017-09-19T19:35:00.957Z,1505849700.957 [Supervisor](DEBUG): Running supervisor.
2017-09-19T19:35:00.958Z,1505849700.958 [CommandLine ThreadHandler](INFO): Handler Thread ID is 992
2017-09-19T19:35:00.961Z,1505849700.961 [controlThread ThreadHandler](INFO): Handler Thread ID is 993
2017-09-19T19:35:00.962Z,1505849700.962 [controlThread](DEBUG): Initializing ControlThread
2017-09-19T19:35:00.963Z,1505849700.963 [SBIT](INFO): Initialize SBIT Component.
2017-09-19T19:35:00.963Z,1505849700.963 [SBIT](IMPORTANT): git: 2017-08-02-115-g578c285
2017-09-19T19:35:00.963Z,1505849700.963 [SBIT](INFO): git hash: 578c285a2bbd310b0721fe6585a19844c60a5fcb
2017-09-19T19:35:00.966Z,1505849700.966 [SBIT](INFO): Kernel Reporting Different Release From Configuration.
Kernel Expected: 2.6.27.8
Kernel Reported: 2.6.27.8-00011-g2bc81df-dirty
2017-09-19T19:35:00.966Z,1505849700.966 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #646 PREEMPT Thu Feb 11 17:01:12 PST 2016
2017-09-19T19:35:00.967Z,1505849700.967 [SBIT](INFO): Beginning SBIT in 71.000000 seconds.
2017-09-19T19:35:00.968Z,1505849700.968 [IBIT](INFO): Initialize IBIT Component.
2017-09-19T19:35:00.969Z,1505849700.969 [CBIT](DEBUG): Initialize CBIT Component.
2017-09-19T19:35:00.969Z,1505849700.969 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-09-19T19:35:00.970Z,1505849700.970 [logger ThreadHandler](INFO): Handler Thread ID is 994
2017-09-19T19:35:00.987Z,1505849700.987 [CTD_NeilBrown ThreadHandler](INFO): Handler Thread ID is 995
2017-09-19T19:35:00.988Z,1505849700.988 [CTD_NeilBrown](INFO): Powering down
2017-09-19T19:35:01.007Z,1505849701.007 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 996
2017-09-19T19:35:01.008Z,1505849701.008 [CTD_Seabird](INFO): Initializing
2017-09-19T19:35:01.059Z,1505849701.059 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-09-19T19:35:01.062Z,1505849701.062 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-09-19T19:35:01.063Z,1505849701.063 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-09-19T19:35:01.064Z,1505849701.064 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-09-19T19:35:01.065Z,1505849701.065 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-09-19T19:35:01.065Z,1505849701.065 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-09-19T19:35:01.065Z,1505849701.065 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-09-19T19:35:01.066Z,1505849701.066 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-09-19T19:35:01.067Z,1505849701.067 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-09-19T19:35:01.068Z,1505849701.068 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-09-19T19:35:01.069Z,1505849701.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-09-19T19:35:01.070Z,1505849701.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-09-19T19:35:01.071Z,1505849701.071 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 998
2017-09-19T19:35:01.073Z,1505849701.073 [WetLabsBB2FL](INFO): Powering down
2017-09-19T19:35:01.070Z,1505849701.070 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-09-19T19:35:01.074Z,1505849701.074 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-09-19T19:35:01.111Z,1505849701.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-09-19T19:35:01.111Z,1505849701.111 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-09-19T19:35:01.112Z,1505849701.112 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-09-19T19:35:01.112Z,1505849701.112 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-09-19T19:35:01.127Z,1505849701.127 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 999
2017-09-19T19:35:01.135Z,1505849701.135 [Radio_Surface](INFO): Powering up
2017-09-19T19:35:01.145Z,1505849701.145 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-09-19T19:35:01.151Z,1505849701.151 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 1000
2017-09-19T19:35:01.152Z,1505849701.152 [Rowe_600LCM](INFO): Initializing
2017-09-19T19:35:01.153Z,1505849701.153 [Rowe_600LCM](INFO): Checking LCM
2017-09-19T19:35:01.162Z,1505849701.162 [Rowe_600LCM](INFO): LCM OK
2017-09-19T19:35:01.162Z,1505849701.162 [Rowe_600LCM](INFO): Powering up
2017-09-19T19:35:01.183Z,1505849701.183 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 1001
2017-09-19T19:35:01.187Z,1505849701.187 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-09-19T19:35:01.188Z,1505849701.188 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-09-19T19:35:01.188Z,1505849701.188 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-09-19T19:35:01.188Z,1505849701.188 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-09-19T19:35:01.188Z,1505849701.188 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-09-19T19:35:01.188Z,1505849701.188 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-09-19T19:35:01.189Z,1505849701.189 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-09-19T19:35:01.189Z,1505849701.189 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-09-19T19:35:01.189Z,1505849701.189 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-09-19T19:35:01.189Z,1505849701.189 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-09-19T19:35:01.189Z,1505849701.189 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-09-19T19:35:01.190Z,1505849701.190 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-09-19T19:35:01.190Z,1505849701.190 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-09-19T19:35:01.190Z,1505849701.190 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-09-19T19:35:01.190Z,1505849701.190 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-09-19T19:35:01.191Z,1505849701.191 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-09-19T19:35:01.224Z,1505849701.224 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-09-19T19:35:01.285Z,1505849701.285 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-09-19T19:35:01.286Z,1505849701.286 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-09-19T19:35:01.333Z,1505849701.333 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-09-19T19:35:01.334Z,1505849701.334 [CTD_Seabird](INFO): Powering down
2017-09-19T19:35:01.401Z,1505849701.401 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-09-19T19:35:01.403Z,1505849701.403 [Default:A.Wait](DEBUG): Construct Wait.
2017-09-19T19:35:01.405Z,1505849701.405 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-09-19T19:35:01.460Z,1505849701.460 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-09-19T19:35:01.463Z,1505849701.463 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-09-19T19:35:01.486Z,1505849701.486 [Default:E.Execute](DEBUG): Construct Execute.
2017-09-19T19:35:01.490Z,1505849701.490 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-09-19T19:35:01.500Z,1505849701.500 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-09-19T19:35:01.588Z,1505849701.588 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-09-19T19:35:01.617Z,1505849701.617 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2017-09-19T19:35:01.700Z,1505849701.700 [DAT](INFO): Powering up
2017-09-19T19:35:01.701Z,1505849701.701 [DAT](DEBUG): Initializing DAT.
2017-09-19T19:35:01.883Z,1505849701.883 [DepthRateCalculator](ERROR): Depth measurement is not active
2017-09-19T19:35:02.029Z,1505849702.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:02.056Z,1505849702.056 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:02.193Z,1505849702.193 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-09-19T19:35:02.201Z,1505849702.201 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-09-19T19:35:02.225Z,1505849702.225 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-09-19T19:35:02.233Z,1505849702.233 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-09-19T19:35:02.256Z,1505849702.256 [MassServo](DEBUG): Initializing EZServoServo.
2017-09-19T19:35:02.265Z,1505849702.265 [MassServo](DEBUG): Initializing MassServo.
2017-09-19T19:35:02.295Z,1505849702.295 [RudderServo](DEBUG): Initializing EZServoServo.
2017-09-19T19:35:02.301Z,1505849702.301 [RudderServo](DEBUG): Initializing RudderServo.
2017-09-19T19:35:02.315Z,1505849702.315 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-09-19T19:35:02.321Z,1505849702.321 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-09-19T19:35:02.790Z,1505849702.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:02.792Z,1505849702.792 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:03.250Z,1505849703.250 [RudderServo](ERROR): Rudder initialization uart error serial timeout
2017-09-19T19:35:03.250Z,1505849703.250 [RudderServo](FAULT): Rudder failed to initialize
2017-09-19T19:35:03.250Z,1505849703.250 [RudderServo] Communications Fault, FailCount= 1
2017-09-19T19:35:03.250Z,1505849703.250 [RudderServo](ERROR): Communications Fault
2017-09-19T19:35:03.362Z,1505849703.362 [CBIT](ERROR): Communications Fault in component: RudderServo
2017-09-19T19:35:03.400Z,1505849703.400 [NAL9602](INFO): Powering up NAL9602
2017-09-19T19:35:03.432Z,1505849703.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:03.451Z,1505849703.451 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:03.459Z,1505849703.459 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2017-09-19T19:35:03.460Z,1505849703.460 [RudderServo](INFO): Powering down
2017-09-19T19:35:03.824Z,1505849703.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:03.825Z,1505849703.825 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:04.256Z,1505849704.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:04.257Z,1505849704.257 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:04.283Z,1505849704.283 [RudderServo](DEBUG): Initializing EZServoServo.
2017-09-19T19:35:04.401Z,1505849704.401 [RudderServo](DEBUG): Initializing RudderServo.
2017-09-19T19:35:04.406Z,1505849704.406 [CBIT](INFO): Clearing failed state for component RudderServo
2017-09-19T19:35:04.406Z,1505849704.406 [RudderServo] No Fault, FailCount= 1
2017-09-19T19:35:04.692Z,1505849704.692 [Aanderaa_O2](INFO): Powering down
2017-09-19T19:35:04.877Z,1505849704.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:04.878Z,1505849704.878 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:05.149Z,1505849705.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:05.150Z,1505849705.150 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-19T19:35:05.388Z,1505849705.388 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-09-19T19:35:05.500Z,1505849705.500 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-09-19T19:35:05.572Z,1505849705.572 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-09-19T19:35:05.590Z,1505849705.590 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-09-19T19:35:05.591Z,1505849705.591 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-09-19T19:35:13.989Z,1505849713.989 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.12.5
Sep 19 2017 19:34:57 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2017-09-19T19:35:13.989Z,1505849713.989 [DAT](INFO): Got CONNECT
2017-09-19T19:35:14.003Z,1505849714.003 [DAT](INFO): entering command mode
2017-09-19T19:35:14.350Z,1505849714.350 [NAL9602](INFO): NAL9602 initialized
2017-09-19T19:35:14.367Z,1505849714.367 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-19T19:35:14.368Z,1505849714.368 [DAT](DEBUG): read user prompt 1: user:1>
2017-09-19T19:35:14.368Z,1505849714.368 [DAT](INFO): command mode acknowledged
2017-09-19T19:35:14.787Z,1505849714.787 [DAT](INFO): setting local address to 2
2017-09-19T19:35:14.807Z,1505849714.807 [PNI_TCM](ERROR): CRC does not match. Expected:0x47396 got:0x45943
2017-09-19T19:35:15.182Z,1505849715.182 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-19T19:35:15.183Z,1505849715.183 [DAT](INFO): set local address to 2
2017-09-19T19:35:15.580Z,1505849715.580 [DAT](DEBUG): read user prompt 2: user:2>
2017-09-19T19:35:27.594Z,1505849727.594 [PNI_TCM](ERROR): CRC does not match. Expected:0x33564 got:0x28776
2017-09-19T19:35:38.871Z,1505849738.871 [CommandLine](IMPORTANT): got command failComponent
2017-09-19T19:35:38.871Z,1505849738.871 [CommandLine](IMPORTANT): Failed components:
2017-09-19T19:35:38.872Z,1505849738.872 [CommandLine](IMPORTANT): No failed Components.
2017-09-19T19:36:06.780Z,1505849766.780 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:07.183Z,1505849767.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:07.214Z,1505849767.214 [PNI_TCM](ERROR): CRC does not match. Expected:0x40848 got:0x26579
2017-09-19T19:36:07.585Z,1505849767.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:07.987Z,1505849767.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:08.396Z,1505849768.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:08.799Z,1505849768.799 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:09.198Z,1505849769.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:09.570Z,1505849769.570 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:09.978Z,1505849769.978 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:10.374Z,1505849770.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:10.769Z,1505849770.769 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:11.177Z,1505849771.177 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:11.575Z,1505849771.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:11.981Z,1505849771.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:12.366Z,1505849772.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:12.457Z,1505849772.457 [SBIT](IMPORTANT): Beginning Startup BIT
2017-09-19T19:36:12.470Z,1505849772.470 [CBIT](IMPORTANT): Beginning ground fault scan
2017-09-19T19:36:12.771Z,1505849772.771 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:13.182Z,1505849773.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:13.593Z,1505849773.593 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:13.998Z,1505849773.998 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:14.391Z,1505849774.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:14.981Z,1505849774.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:15.352Z,1505849775.352 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:15.752Z,1505849775.752 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:16.165Z,1505849776.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:16.553Z,1505849776.553 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:16.954Z,1505849776.954 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:17.355Z,1505849777.355 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:17.755Z,1505849777.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:18.165Z,1505849778.165 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:18.566Z,1505849778.566 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:18.971Z,1505849778.971 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:19.379Z,1505849779.379 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:19.768Z,1505849779.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:20.151Z,1505849780.151 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:20.555Z,1505849780.555 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:20.960Z,1505849780.960 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:21.366Z,1505849781.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:21.762Z,1505849781.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:22.156Z,1505849782.156 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:22.551Z,1505849782.551 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:22.966Z,1505849782.966 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:23.088Z,1505849783.088 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 4.657929
CHAN A1 (24V): 0.027656
CHAN A2 (12V): -0.002426
CHAN A3 (5V): 4.753929
CHAN B0 (3.3V): 0.001817
CHAN B1 (3.15aV): -0.000087
CHAN B2 (3.15bV): -0.000472
CHAN B3 (GND): -0.000079
OPEN: -0.000624
Full Scale Calc: 4.765 mA, -1.589 mA
2017-09-19T19:36:23.382Z,1505849783.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:23.782Z,1505849783.782 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:24.227Z,1505849784.227 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:24.575Z,1505849784.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:24.955Z,1505849784.955 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:25.351Z,1505849785.351 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:25.762Z,1505849785.762 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:26.161Z,1505849786.161 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:26.571Z,1505849786.571 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:36:40.177Z,1505849800.177 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003706
2017-09-19T19:36:45.037Z,1505849805.037 [BPC1](ERROR): Failed to receive battery data
2017-09-19T19:36:45.038Z,1505849805.038 [BPC1] Communications Fault, FailCount= 1
2017-09-19T19:36:45.038Z,1505849805.038 [BPC1](ERROR): Communications Fault
2017-09-19T19:36:45.146Z,1505849805.146 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-19T19:36:46.338Z,1505849806.338 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:36:46.339Z,1505849806.339 [BPC1] No Fault, FailCount= 1
2017-09-19T19:37:01.208Z,1505849821.208 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-19T19:37:05.194Z,1505849825.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:05.464Z,1505849825.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:05.584Z,1505849825.584 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:05.989Z,1505849825.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:06.258Z,1505849826.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:06.372Z,1505849826.372 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:06.666Z,1505849826.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:06.777Z,1505849826.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:06.795Z,1505849826.795 [PNI_TCM](ERROR): CRC does not match. Expected:0x17712 got:0x7233
2017-09-19T19:37:06.845Z,1505849826.845 [SBIT](IMPORTANT): SBIT PASSED
2017-09-19T19:37:07.185Z,1505849827.185 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:07.244Z,1505849827.244 [MissionManager](IMPORTANT): Started mission Startup
2017-09-19T19:37:07.245Z,1505849827.245 [Startup] Running Loop=1
2017-09-19T19:37:07.245Z,1505849827.245 [Startup](DEBUG): Aggregate::initialize Startup
2017-09-19T19:37:07.245Z,1505849827.245 [Startup:A.GoToSurface] Running Loop=1
2017-09-19T19:37:07.245Z,1505849827.245 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-09-19T19:37:07.250Z,1505849827.250 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-09-19T19:37:07.251Z,1505849827.251 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-09-19T19:37:07.251Z,1505849827.251 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-09-19T19:37:07.251Z,1505849827.251 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-09-19T19:37:07.252Z,1505849827.252 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-09-19T19:37:07.275Z,1505849827.275 [Startup:StartupSatComms] Running Loop=1
2017-09-19T19:37:07.275Z,1505849827.275 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-09-19T19:37:07.275Z,1505849827.275 [Startup:StartupSatComms:A] Running Loop=1
2017-09-19T19:37:07.565Z,1505849827.565 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:07.623Z,1505849827.623 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-09-19T19:37:07.974Z,1505849827.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:08.382Z,1505849828.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:08.785Z,1505849828.785 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:09.174Z,1505849829.174 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:09.579Z,1505849829.579 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:09.999Z,1505849829.999 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:10.388Z,1505849830.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:10.800Z,1505849830.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:11.197Z,1505849831.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:11.585Z,1505849831.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:11.974Z,1505849831.974 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:12.375Z,1505849832.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:12.770Z,1505849832.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:13.187Z,1505849833.187 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:13.575Z,1505849833.575 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:13.972Z,1505849833.972 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:14.368Z,1505849834.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:14.781Z,1505849834.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:15.195Z,1505849835.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:15.588Z,1505849835.588 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:15.983Z,1505849835.983 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:16.392Z,1505849836.392 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:16.779Z,1505849836.779 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:17.181Z,1505849837.181 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:17.583Z,1505849837.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:17.991Z,1505849837.991 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:18.375Z,1505849838.375 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:18.777Z,1505849838.777 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:19.188Z,1505849839.188 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:19.568Z,1505849839.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:19.969Z,1505849839.969 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:20.388Z,1505849840.388 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:20.800Z,1505849840.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:21.197Z,1505849841.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:21.594Z,1505849841.594 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:21.980Z,1505849841.980 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:22.391Z,1505849842.391 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:22.781Z,1505849842.781 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:23.182Z,1505849843.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:23.583Z,1505849843.583 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:23.986Z,1505849843.986 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:24.382Z,1505849844.382 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:24.770Z,1505849844.770 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:25.186Z,1505849845.186 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:25.601Z,1505849845.601 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:25.989Z,1505849845.989 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:26.413Z,1505849846.413 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:26.812Z,1505849846.812 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:27.182Z,1505849847.182 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:27.585Z,1505849847.585 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:27.976Z,1505849847.976 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:28.368Z,1505849848.368 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:28.795Z,1505849848.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:29.183Z,1505849849.183 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:29.568Z,1505849849.568 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:29.987Z,1505849849.987 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:30.366Z,1505849850.366 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:30.801Z,1505849850.801 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:31.197Z,1505849851.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:31.611Z,1505849851.611 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:32.006Z,1505849852.006 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:32.383Z,1505849852.383 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:39.195Z,1505849859.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:39.598Z,1505849859.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:39.608Z,1505849859.608 [PNI_TCM](ERROR): CRC does not match. Expected:0x42310 got:0x16996
2017-09-19T19:37:40.005Z,1505849860.005 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:40.393Z,1505849860.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:40.793Z,1505849860.793 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:41.210Z,1505849861.210 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:41.218Z,1505849861.218 [PNI_TCM](ERROR): CRC does not match. Expected:0x42516 got:0x1941
2017-09-19T19:37:41.610Z,1505849861.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:41.995Z,1505849861.995 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:42.384Z,1505849862.384 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:42.806Z,1505849862.806 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:42.819Z,1505849862.819 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-09-19T19:37:43.199Z,1505849863.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:43.591Z,1505849863.591 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:43.992Z,1505849863.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:44.396Z,1505849864.396 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:44.807Z,1505849864.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:45.209Z,1505849865.209 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:45.590Z,1505849865.590 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:46.022Z,1505849866.022 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:46.030Z,1505849866.030 [PNI_TCM](ERROR): CRC does not match. Expected:0x26094 got:0x63219
2017-09-19T19:37:46.426Z,1505849866.426 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:46.798Z,1505849866.798 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:47.197Z,1505849867.197 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:47.600Z,1505849867.600 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:48.001Z,1505849868.001 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:48.395Z,1505849868.395 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:48.807Z,1505849868.807 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:49.204Z,1505849869.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:49.607Z,1505849869.607 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:49.988Z,1505849869.988 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:50.404Z,1505849870.404 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:50.822Z,1505849870.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:51.199Z,1505849871.199 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:51.598Z,1505849871.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:51.992Z,1505849871.992 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:52.393Z,1505849872.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:52.795Z,1505849872.795 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:53.205Z,1505849873.205 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:53.598Z,1505849873.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:53.981Z,1505849873.981 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:54.387Z,1505849874.387 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:54.815Z,1505849874.815 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:55.198Z,1505849875.198 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:55.603Z,1505849875.603 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:56.011Z,1505849876.011 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:56.386Z,1505849876.386 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:56.787Z,1505849876.787 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:57.195Z,1505849877.195 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:57.587Z,1505849877.587 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:57.997Z,1505849877.997 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:58.393Z,1505849878.393 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:58.789Z,1505849878.789 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:58.804Z,1505849878.804 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-09-19T19:37:59.204Z,1505849879.204 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:37:59.609Z,1505849879.609 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:00.004Z,1505849880.004 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:00.411Z,1505849880.411 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:00.802Z,1505849880.802 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:01.203Z,1505849881.203 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:01.234Z,1505849881.234 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-09-19T19:38:01.234Z,1505849881.234 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-09-19T19:38:01.234Z,1505849881.234 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-09-19T19:38:01.241Z,1505849881.241 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-09-19T19:38:01.241Z,1505849881.241 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-09-19T19:38:01.241Z,1505849881.241 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-09-19T19:38:01.281Z,1505849881.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-09-19T19:38:01.281Z,1505849881.281 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-09-19T19:38:01.597Z,1505849881.597 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:01.655Z,1505849881.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-09-19T19:38:01.655Z,1505849881.655 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-09-19T19:38:01.660Z,1505849881.660 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-09-19T19:38:01.661Z,1505849881.661 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-09-19T19:38:01.984Z,1505849881.984 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:02.041Z,1505849882.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-09-19T19:38:02.042Z,1505849882.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-09-19T19:38:02.042Z,1505849882.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-09-19T19:38:02.043Z,1505849882.043 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-09-19T19:38:02.043Z,1505849882.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-09-19T19:38:02.043Z,1505849882.043 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-09-19T19:38:02.400Z,1505849882.400 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:02.800Z,1505849882.800 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:03.194Z,1505849883.194 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:03.598Z,1505849883.598 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:04.007Z,1505849884.007 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:06.812Z,1505849886.812 [PNI_TCM](ERROR): CRC does not match. Expected:0x32746 got:0x28609
2017-09-19T19:38:07.639Z,1505849887.639 [Startup:StartupSatComms:A](INFO): Timed out from 2017-09-19T19:37:07.3Z
2017-09-19T19:38:07.639Z,1505849887.639 [Startup:StartupSatComms:A] Stopped
2017-09-19T19:38:07.639Z,1505849887.639 [Startup:StartupSatComms:B] Running Loop=1
2017-09-19T19:38:08.066Z,1505849888.066 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-09-19T19:38:12.879Z,1505849892.879 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20170919T191106/Courier0052.lzma
2017-09-19T19:38:13.642Z,1505849893.642 [DataOverHttps](INFO): Moved sent file to Logs/20170919T191106/Courier0052.lzma.bak
2017-09-19T19:38:13.642Z,1505849893.642 [DataOverHttps](INFO): SBD MOMSN=5096088
2017-09-19T19:38:13.701Z,1505849893.701 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:14.507Z,1505849894.507 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:14.633Z,1505849894.633 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:18.116Z,1505849898.116 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:18.285Z,1505849898.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:18.610Z,1505849898.610 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:19.023Z,1505849899.023 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:19.415Z,1505849899.415 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:19.822Z,1505849899.822 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:23.303Z,1505849903.303 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:23.428Z,1505849903.428 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20170919T193234/Courier0000.lzma
2017-09-19T19:38:23.457Z,1505849903.457 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:23.837Z,1505849903.837 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:24.248Z,1505849904.248 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193234/Courier0000.lzma.bak
2017-09-19T19:38:24.248Z,1505849904.248 [DataOverHttps](INFO): SBD MOMSN=5096090
2017-09-19T19:38:24.319Z,1505849904.319 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:31.913Z,1505849911.913 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:32.046Z,1505849912.046 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:35.482Z,1505849915.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:35.664Z,1505849915.664 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:36.021Z,1505849916.021 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:36.453Z,1505849916.453 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:36.809Z,1505849916.809 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:37.212Z,1505849917.212 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:38:40.853Z,1505849920.853 [DataOverHttps](INFO): Sending 283 bytes from file Logs/20170919T191106/Express0053.lzma
2017-09-19T19:38:41.610Z,1505849921.610 [DataOverHttps](INFO): Moved sent file to Logs/20170919T191106/Express0053.lzma.bak
2017-09-19T19:38:41.610Z,1505849921.610 [DataOverHttps](INFO): SBD MOMSN=5096093
2017-09-19T19:38:51.716Z,1505849931.716 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20170919T193234/Express0001.lzma
2017-09-19T19:38:52.463Z,1505849932.463 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193234/Express0001.lzma.bak
2017-09-19T19:38:52.463Z,1505849932.463 [DataOverHttps](INFO): SBD MOMSN=5096101
2017-09-19T19:39:02.606Z,1505849942.606 [DataOverHttps](INFO): Sending 540 bytes from file Logs/20170919T193335/Express0001.lzma
2017-09-19T19:39:03.365Z,1505849943.365 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193335/Express0001.lzma.bak
2017-09-19T19:39:03.365Z,1505849943.365 [DataOverHttps](INFO): SBD MOMSN=5096103
2017-09-19T19:39:07.984Z,1505849947.984 [Startup:StartupSatComms:B](INFO): Timed out from 2017-09-19T19:38:07.6Z
2017-09-19T19:39:07.984Z,1505849947.984 [Startup:StartupSatComms:B] Stopped
2017-09-19T19:39:07.984Z,1505849947.984 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-09-19T19:39:07.984Z,1505849947.984 [Startup:StartupSatComms] Stopped
2017-09-19T19:39:07.985Z,1505849947.985 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-09-19T19:39:07.986Z,1505849947.986 [Startup](INFO): Completed Startup
2017-09-19T19:39:07.986Z,1505849947.986 [MissionManager](INFO): Startup is completed.
2017-09-19T19:39:07.986Z,1505849947.986 [MissionManager](INFO): Uninitializing Mission Startup
2017-09-19T19:39:07.986Z,1505849947.986 [Startup] Stopped
2017-09-19T19:39:07.986Z,1505849947.986 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-09-19T19:39:07.986Z,1505849947.986 [Startup:A.GoToSurface] Stopped
2017-09-19T19:39:07.986Z,1505849947.986 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-09-19T19:39:08.143Z,1505849948.143 [MissionManager](IMPORTANT): Started mission Default
2017-09-19T19:39:08.143Z,1505849948.143 [Default] Running Loop=1
2017-09-19T19:39:08.143Z,1505849948.143 [Default](DEBUG): Aggregate::initialize Default
2017-09-19T19:39:08.143Z,1505849948.143 [Default:B.GoToSurface] Running Loop=1
2017-09-19T19:39:08.143Z,1505849948.143 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-09-19T19:39:08.144Z,1505849948.144 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-09-19T19:39:08.144Z,1505849948.144 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-09-19T19:39:08.145Z,1505849948.145 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-09-19T19:39:08.149Z,1505849948.149 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-09-19T19:39:08.150Z,1505849948.150 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-09-19T19:39:08.150Z,1505849948.150 [Default:A.Wait] Running Loop=1
2017-09-19T19:39:08.151Z,1505849948.151 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-09-19T19:39:13.483Z,1505849953.483 [DataOverHttps](INFO): Sending 610 bytes from file Logs/20170919T193449/Express0001.lzma
2017-09-19T19:39:14.246Z,1505849954.246 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Express0001.lzma.bak
2017-09-19T19:39:14.246Z,1505849954.246 [DataOverHttps](INFO): SBD MOMSN=5096113
2017-09-19T19:39:14.278Z,1505849954.278 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:14.683Z,1505849954.683 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:15.090Z,1505849955.090 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:15.492Z,1505849955.492 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:15.887Z,1505849955.887 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:16.268Z,1505849956.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:16.667Z,1505849956.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:17.076Z,1505849957.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:17.476Z,1505849957.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:17.881Z,1505849957.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:18.280Z,1505849958.280 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:18.676Z,1505849958.676 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:19.080Z,1505849959.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:19.474Z,1505849959.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:19.893Z,1505849959.893 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:20.285Z,1505849960.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:20.669Z,1505849960.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:21.074Z,1505849961.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:21.472Z,1505849961.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:21.557Z,1505849961.557 [Default:A.Wait](INFO): Done Waiting.
2017-09-19T19:39:21.557Z,1505849961.557 [Default:A.Wait] Stopped
2017-09-19T19:39:21.557Z,1505849961.557 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-09-19T19:39:21.868Z,1505849961.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:21.912Z,1505849961.912 [Default:CheckIn] Running Loop=1
2017-09-19T19:39:21.912Z,1505849961.912 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-19T19:39:21.912Z,1505849961.912 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-19T19:39:22.281Z,1505849962.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:22.355Z,1505849962.355 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-09-19T19:39:22.667Z,1505849962.667 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:23.068Z,1505849963.068 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:23.472Z,1505849963.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:23.883Z,1505849963.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:24.288Z,1505849964.288 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:24.677Z,1505849964.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:25.078Z,1505849965.078 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:25.482Z,1505849965.482 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:25.883Z,1505849965.883 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:26.272Z,1505849966.272 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:26.665Z,1505849966.665 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:27.074Z,1505849967.074 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:27.473Z,1505849967.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:27.871Z,1505849967.871 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:28.290Z,1505849968.290 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:28.679Z,1505849968.679 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:29.067Z,1505849969.067 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:29.485Z,1505849969.485 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:29.866Z,1505849969.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:30.270Z,1505849970.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:30.668Z,1505849970.668 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:31.073Z,1505849971.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:31.469Z,1505849971.469 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:31.881Z,1505849971.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:32.281Z,1505849972.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:32.685Z,1505849972.685 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:33.100Z,1505849973.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:33.499Z,1505849973.499 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:33.900Z,1505849973.900 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:34.281Z,1505849974.281 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:34.677Z,1505849974.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:34.688Z,1505849974.688 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T19:39:34.688Z,1505849974.688 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:39:34.688Z,1505849974.688 [BPC1](ERROR): Data Fault
2017-09-19T19:39:34.760Z,1505849974.760 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:39:35.079Z,1505849975.079 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:35.479Z,1505849975.479 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:35.879Z,1505849975.879 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:35.931Z,1505849975.931 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:39:35.932Z,1505849975.932 [BPC1] No Fault, FailCount= 1
2017-09-19T19:39:36.282Z,1505849976.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:36.686Z,1505849976.686 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:37.088Z,1505849977.088 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:37.487Z,1505849977.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:37.899Z,1505849977.899 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:38.296Z,1505849978.296 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:38.678Z,1505849978.678 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:39.073Z,1505849979.073 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:39.477Z,1505849979.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:39.870Z,1505849979.870 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:40.284Z,1505849980.284 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:40.689Z,1505849980.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:41.076Z,1505849981.076 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:41.477Z,1505849981.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:41.877Z,1505849981.877 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:42.269Z,1505849982.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:42.689Z,1505849982.689 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:43.084Z,1505849983.084 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:43.472Z,1505849983.472 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:43.876Z,1505849983.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:44.282Z,1505849984.282 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:44.696Z,1505849984.696 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:45.075Z,1505849985.075 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:45.468Z,1505849985.468 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:45.876Z,1505849985.876 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:46.270Z,1505849986.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:46.677Z,1505849986.677 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:47.072Z,1505849987.072 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:47.488Z,1505849987.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:47.872Z,1505849987.872 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:48.270Z,1505849988.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:48.691Z,1505849988.691 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:49.081Z,1505849989.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:49.467Z,1505849989.467 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:49.866Z,1505849989.866 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:50.269Z,1505849990.269 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:50.669Z,1505849990.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:51.083Z,1505849991.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:51.473Z,1505849991.473 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:51.869Z,1505849991.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:52.277Z,1505849992.277 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:52.670Z,1505849992.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:53.071Z,1505849993.071 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:53.487Z,1505849993.487 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:53.865Z,1505849993.865 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:54.254Z,1505849994.254 [NAL9602](INFO): SBD MO Status=2, MOMSN=549, MT Status=2, MTMSN=0
2017-09-19T19:39:54.255Z,1505849994.255 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-19T19:39:54.275Z,1505849994.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:54.692Z,1505849994.692 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:55.080Z,1505849995.080 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:55.476Z,1505849995.476 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:55.881Z,1505849995.881 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:56.285Z,1505849996.285 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:56.669Z,1505849996.669 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:57.085Z,1505849997.085 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:57.466Z,1505849997.466 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:57.867Z,1505849997.867 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:58.270Z,1505849998.270 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:58.707Z,1505849998.707 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:59.100Z,1505849999.100 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:59.477Z,1505849999.477 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:39:59.878Z,1505849999.878 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:00.276Z,1505850000.276 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:00.682Z,1505850000.682 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:01.083Z,1505850001.083 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:01.483Z,1505850001.483 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:01.869Z,1505850001.869 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:02.268Z,1505850002.268 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:02.675Z,1505850002.675 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:03.101Z,1505850003.101 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:03.481Z,1505850003.481 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:03.880Z,1505850003.880 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:04.275Z,1505850004.275 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:04.693Z,1505850004.693 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:05.082Z,1505850005.082 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:05.489Z,1505850005.489 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:05.875Z,1505850005.875 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:06.297Z,1505850006.297 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:06.710Z,1505850006.710 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:07.087Z,1505850007.087 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:07.488Z,1505850007.488 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:07.901Z,1505850007.901 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:08.298Z,1505850008.298 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:08.670Z,1505850008.670 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:09.081Z,1505850009.081 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:09.486Z,1505850009.486 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:09.868Z,1505850009.868 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:16.442Z,1505850016.442 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:16.612Z,1505850016.612 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:16.929Z,1505850016.929 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:17.321Z,1505850017.321 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-19T19:40:17.374Z,1505850017.374 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:17.743Z,1505850017.743 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:18.138Z,1505850018.138 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:18.525Z,1505850018.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:18.927Z,1505850018.927 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:19.348Z,1505850019.348 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:19.740Z,1505850019.740 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:20.141Z,1505850020.141 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:20.528Z,1505850020.528 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:20.937Z,1505850020.937 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:21.326Z,1505850021.326 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:21.768Z,1505850021.768 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:22.139Z,1505850022.139 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:22.572Z,1505850022.572 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:22.939Z,1505850022.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:23.337Z,1505850023.337 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:23.724Z,1505850023.724 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:24.132Z,1505850024.132 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:24.529Z,1505850024.529 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:24.939Z,1505850024.939 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:25.349Z,1505850025.349 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:25.733Z,1505850025.733 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:26.126Z,1505850026.126 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:26.533Z,1505850026.533 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:26.943Z,1505850026.943 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:27.354Z,1505850027.354 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:27.715Z,1505850027.715 [NAL9602](INFO): GPS fix at 20170919T194027: (36.802737, -121.788061)
2017-09-19T19:40:27.745Z,1505850027.745 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:27.805Z,1505850027.805 [Default:CheckIn:Read_GPS] Stopped
2017-09-19T19:40:27.805Z,1505850027.805 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-19T19:40:28.144Z,1505850028.144 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:28.266Z,1505850028.266 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-09-19T19:40:39.628Z,1505850039.628 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:39.736Z,1505850039.736 [BPC1](ERROR): Failed to receive battery data
2017-09-19T19:40:39.737Z,1505850039.737 [BPC1] Communications Fault, FailCount= 1
2017-09-19T19:40:39.737Z,1505850039.737 [BPC1](ERROR): Communications Fault
2017-09-19T19:40:39.903Z,1505850039.903 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-19T19:40:39.967Z,1505850039.967 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:45.265Z,1505850045.265 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:45.428Z,1505850045.428 [DataOverHttps](INFO): Sending 216 bytes from file Logs/20170919T193449/Courier0004.lzma
2017-09-19T19:40:45.445Z,1505850045.445 [NAL9602](INFO): Powering down
2017-09-19T19:40:45.474Z,1505850045.474 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:45.576Z,1505850045.576 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:40:45.576Z,1505850045.576 [BPC1] No Fault, FailCount= 1
2017-09-19T19:40:45.842Z,1505850045.842 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:46.229Z,1505850046.229 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Courier0004.lzma.bak
2017-09-19T19:40:46.230Z,1505850046.230 [DataOverHttps](INFO): SBD MOMSN=5096127
2017-09-19T19:40:46.261Z,1505850046.261 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:47.716Z,1505850047.716 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:47.924Z,1505850047.924 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:51.904Z,1505850051.904 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:52.055Z,1505850052.055 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:52.425Z,1505850052.425 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:52.828Z,1505850052.828 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:53.222Z,1505850053.222 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:53.629Z,1505850053.629 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:57.637Z,1505850057.637 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:57.792Z,1505850057.792 [DataOverHttps](INFO): Sending 300 bytes from file Logs/20170919T193449/Express0005.lzma
2017-09-19T19:40:57.827Z,1505850057.827 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:58.238Z,1505850058.238 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:58.586Z,1505850058.586 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Express0005.lzma.bak
2017-09-19T19:40:58.587Z,1505850058.587 [DataOverHttps](INFO): SBD MOMSN=5096130
2017-09-19T19:40:58.615Z,1505850058.615 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:59.525Z,1505850059.525 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:40:59.654Z,1505850059.654 [Default:CheckIn:Read_Iridium] Stopped
2017-09-19T19:40:59.654Z,1505850059.654 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-19T19:40:59.654Z,1505850059.654 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-19T19:40:59.755Z,1505850059.755 [DAT](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:42:17.246Z,1505850137.246 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T19:42:17.246Z,1505850137.246 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:42:17.246Z,1505850137.246 [BPC1](ERROR): Data Fault
2017-09-19T19:42:17.302Z,1505850137.302 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:42:18.503Z,1505850138.503 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:42:18.503Z,1505850138.503 [BPC1] No Fault, FailCount= 1
2017-09-19T19:42:22.449Z,1505850142.449 [DAT](FAULT): unknown deviceResponse_: HS= 0.285, 562, 2.824, 2ers Stored

2017-09-19T19:42:22.449Z,1505850142.449 [DAT] Communications Fault, FailCount= 1
2017-09-19T19:42:22.449Z,1505850142.449 [DAT](ERROR): Communications Fault
2017-09-19T19:42:22.450Z,1505850142.450 [DAT](DEBUG): uncaught empty line in deviceResponse_: 

2017-09-19T19:42:22.450Z,1505850142.450 [DAT](DEBUG): read user prompt 9: user:9>
2017-09-19T19:42:22.552Z,1505850142.552 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-19T19:42:22.830Z,1505850142.830 [DAT](INFO): Powering down
2017-09-19T19:42:23.691Z,1505850143.691 [CBIT](INFO): Clearing failed state for component DAT
2017-09-19T19:42:23.691Z,1505850143.691 [DAT] No Fault, FailCount= 1
2017-09-19T19:42:26.024Z,1505850146.024 [DAT](INFO): Powering up
2017-09-19T19:42:26.024Z,1505850146.024 [DAT](DEBUG): Initializing DAT.
2017-09-19T19:42:38.040Z,1505850158.040 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.12.5
Sep 19 2017 19:42:21 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2017-09-19T19:42:38.040Z,1505850158.040 [DAT](INFO): Got CONNECT
2017-09-19T19:42:38.054Z,1505850158.054 [DAT](INFO): entering command mode
2017-09-19T19:42:38.431Z,1505850158.431 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-19T19:42:38.432Z,1505850158.432 [DAT](DEBUG): read user prompt 1: user:1>
2017-09-19T19:42:38.432Z,1505850158.432 [DAT](INFO): command mode acknowledged
2017-09-19T19:42:38.836Z,1505850158.836 [DAT](INFO): setting local address to 2
2017-09-19T19:42:39.239Z,1505850159.239 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-19T19:42:39.240Z,1505850159.240 [DAT](INFO): set local address to 2
2017-09-19T19:42:39.634Z,1505850159.634 [DAT](DEBUG): read user prompt 2: user:2>
2017-09-19T19:43:37.428Z,1505850217.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:38.223Z,1505850218.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:38.634Z,1505850218.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:39.427Z,1505850219.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:40.222Z,1505850220.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:40.641Z,1505850220.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:41.434Z,1505850221.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:42.229Z,1505850222.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:42.640Z,1505850222.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:43.433Z,1505850223.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:44.228Z,1505850224.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:44.647Z,1505850224.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:45.441Z,1505850225.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:46.234Z,1505850226.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:43:46.638Z,1505850226.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:44:17.282Z,1505850257.282 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T19:44:17.283Z,1505850257.283 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:44:17.283Z,1505850257.283 [BPC1](ERROR): Data Fault
2017-09-19T19:44:17.346Z,1505850257.346 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:44:18.511Z,1505850258.511 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:44:18.511Z,1505850258.511 [BPC1] No Fault, FailCount= 1
2017-09-19T19:45:04.640Z,1505850304.640 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-19T19:45:49.093Z,1505850349.093 [BPC1](ERROR): Failed to receive battery data
2017-09-19T19:45:49.093Z,1505850349.093 [BPC1] Communications Fault, FailCount= 1
2017-09-19T19:45:49.093Z,1505850349.093 [BPC1](ERROR): Communications Fault
2017-09-19T19:45:49.188Z,1505850349.188 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-19T19:45:50.358Z,1505850350.358 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:45:50.358Z,1505850350.358 [BPC1] No Fault, FailCount= 1
2017-09-19T19:45:59.919Z,1505850359.919 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-19T19:45:59.919Z,1505850359.919 [Default:CheckIn:C.Wait] Stopped
2017-09-19T19:45:59.919Z,1505850359.919 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-19T19:45:59.919Z,1505850359.919 [Default:CheckIn:D] Running Loop=1
2017-09-19T19:46:00.324Z,1505850360.324 [Default:CheckIn:D] Stopped
2017-09-19T19:46:00.324Z,1505850360.324 [Default:CheckIn:E] Running Loop=1
2017-09-19T19:46:00.744Z,1505850360.744 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 6.869636 min 
2017-09-19T19:46:00.746Z,1505850360.746 [Default:CheckIn:E] Stopped
2017-09-19T19:46:00.747Z,1505850360.747 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-19T19:46:00.747Z,1505850360.747 [Default:CheckIn] Stopped
2017-09-19T19:46:00.747Z,1505850360.747 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-19T19:46:00.747Z,1505850360.747 [Default:CheckIn](INFO): Running loop #2
2017-09-19T19:46:00.747Z,1505850360.747 [Default:CheckIn] Running Loop=2
2017-09-19T19:46:00.747Z,1505850360.747 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-19T19:46:00.747Z,1505850360.747 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-19T19:46:04.624Z,1505850364.624 [NAL9602](INFO): Powering up
2017-09-19T19:46:09.990Z,1505850369.990 [PNI_TCM](ERROR): CRC does not match. Expected:0x58291 got:0x6593
2017-09-19T19:46:15.550Z,1505850375.550 [NAL9602](INFO): NAL9602 initialized
2017-09-19T19:46:21.191Z,1505850381.191 [PNI_TCM](ERROR): CRC does not match. Expected:0x2498 got:0x16840
2017-09-19T19:46:24.384Z,1505850384.384 [PNI_TCM](ERROR): CRC does not match. Expected:0x38942 got:0x65049
2017-09-19T19:46:33.989Z,1505850393.989 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T19:46:33.989Z,1505850393.989 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:46:33.990Z,1505850393.990 [BPC1](ERROR): Data Fault
2017-09-19T19:46:34.082Z,1505850394.082 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:46:35.267Z,1505850395.267 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:46:35.267Z,1505850395.267 [BPC1] No Fault, FailCount= 1
2017-09-19T19:46:46.794Z,1505850406.794 [PNI_TCM](ERROR): CRC does not match. Expected:0x15066 got:0x49412
2017-09-19T19:46:47.547Z,1505850407.547 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-09-19T19:46:47.620Z,1505850407.620 [NAL9602](FAULT): received: 
+CSQ:0

OK9, 2, 0, 0, 0

OK
2017-09-19T19:46:47.620Z,1505850407.620 [NAL9602] Data Fault, FailCount= 1
2017-09-19T19:46:47.620Z,1505850407.620 [NAL9602](ERROR): Data Fault
2017-09-19T19:46:47.747Z,1505850407.747 [CBIT](ERROR): Data Fault in component: NAL9602
2017-09-19T19:46:47.958Z,1505850407.958 [NAL9602](INFO): Powering down
2017-09-19T19:46:48.841Z,1505850408.841 [CBIT](INFO): Clearing failed state for component NAL9602
2017-09-19T19:46:48.841Z,1505850408.841 [NAL9602] No Fault, FailCount= 1
2017-09-19T19:46:53.154Z,1505850413.154 [NAL9602](INFO): Powering up NAL9602
2017-09-19T19:46:55.437Z,1505850415.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:46:56.231Z,1505850416.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:46:56.384Z,1505850416.384 [PNI_TCM](ERROR): CRC does not match. Expected:0x11090 got:0x33810
2017-09-19T19:46:56.651Z,1505850416.651 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:46:57.444Z,1505850417.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:46:58.237Z,1505850418.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:46:58.650Z,1505850418.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:46:59.443Z,1505850419.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:00.237Z,1505850420.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:00.657Z,1505850420.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:01.451Z,1505850421.451 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:02.244Z,1505850422.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:02.664Z,1505850422.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:03.458Z,1505850423.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:04.251Z,1505850424.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:04.655Z,1505850424.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:05.330Z,1505850425.330 [NAL9602](INFO): NAL9602 initialized
2017-09-19T19:47:05.449Z,1505850425.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:06.242Z,1505850426.242 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:47:06.683Z,1505850426.683 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:39.449Z,1505850519.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:40.243Z,1505850520.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:40.667Z,1505850520.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:41.461Z,1505850521.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:42.254Z,1505850522.254 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:42.662Z,1505850522.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:45.447Z,1505850525.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:46.240Z,1505850526.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:46.665Z,1505850526.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:47.458Z,1505850527.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:48.251Z,1505850528.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:48:48.660Z,1505850528.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:49:50.330Z,1505850590.330 [DAT](FAULT): unknown deviceResponse_: 3,-0., CAL=   0.4,  0.14.6

2017-09-19T19:49:50.331Z,1505850590.331 [DAT] Communications Fault, FailCount= 2
2017-09-19T19:49:50.331Z,1505850590.331 [DAT](ERROR): Communications Fault
2017-09-19T19:49:50.332Z,1505850590.332 [DAT](DEBUG): read user prompt 11: user:11>
2017-09-19T19:49:50.332Z,1505850590.332 [DAT](ERROR): Read range message, but no direction.
2017-09-19T19:49:50.486Z,1505850590.486 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-19T19:49:50.738Z,1505850590.738 [DAT](INFO): Powering down
2017-09-19T19:49:51.606Z,1505850591.606 [CBIT](INFO): Clearing failed state for component DAT
2017-09-19T19:49:51.606Z,1505850591.606 [DAT] No Fault, FailCount= 0
2017-09-19T19:49:53.936Z,1505850593.936 [DAT](INFO): Powering up
2017-09-19T19:49:53.937Z,1505850593.937 [DAT](DEBUG): Initializing DAT.
2017-09-19T19:50:06.328Z,1505850606.328 [DAT](DEBUG): 
Teledyne Benthos DAT-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.12.5
Sep 19 2017 19:49:49 
WARNING: battery low
Features enabled [Bearing]
CONNECT
2017-09-19T19:50:06.328Z,1505850606.328 [DAT](INFO): Got CONNECT
2017-09-19T19:50:06.343Z,1505850606.343 [DAT](INFO): entering command mode
2017-09-19T19:50:06.583Z,1505850606.583 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-19T19:50:06.584Z,1505850606.584 [DAT](DEBUG): read user prompt 1: user:1>
2017-09-19T19:50:06.584Z,1505850606.584 [DAT](INFO): command mode acknowledged
2017-09-19T19:50:06.941Z,1505850606.941 [DAT](INFO): setting local address to 2
2017-09-19T19:50:07.354Z,1505850607.354 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-19T19:50:07.355Z,1505850607.355 [DAT](INFO): set local address to 2
2017-09-19T19:50:07.736Z,1505850607.736 [DAT](DEBUG): read user prompt 2: user:2>
2017-09-19T19:51:00.979Z,1505850660.979 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-09-19T19:46:00.7Z
2017-09-19T19:51:00.979Z,1505850660.979 [Default:CheckIn:Read_GPS] Stopped
2017-09-19T19:51:00.979Z,1505850660.979 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-19T19:51:05.966Z,1505850665.966 [DataOverHttps](INFO): Sending 195 bytes from file Logs/20170919T193449/Courier0008.lzma
2017-09-19T19:51:06.733Z,1505850666.733 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Courier0008.lzma.bak
2017-09-19T19:51:06.733Z,1505850666.733 [DataOverHttps](INFO): SBD MOMSN=5096134
2017-09-19T19:51:16.923Z,1505850676.923 [DataOverHttps](INFO): Sending 296 bytes from file Logs/20170919T193449/Express0009.lzma
2017-09-19T19:51:17.706Z,1505850677.706 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Express0009.lzma.bak
2017-09-19T19:51:17.706Z,1505850677.706 [DataOverHttps](INFO): SBD MOMSN=5096136
2017-09-19T19:51:18.695Z,1505850678.695 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-19T19:51:18.775Z,1505850678.775 [Default:CheckIn:Read_Iridium] Stopped
2017-09-19T19:51:18.775Z,1505850678.775 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-19T19:51:18.776Z,1505850678.776 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-19T19:51:23.906Z,1505850683.906 [NAL9602](INFO): Powering down
2017-09-19T19:51:44.379Z,1505850704.379 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-09-19T19:52:24.412Z,1505850744.412 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-19T19:52:24.412Z,1505850744.412 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:52:24.412Z,1505850744.412 [BPC1](ERROR): Data Fault
2017-09-19T19:52:24.475Z,1505850744.475 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:52:25.690Z,1505850745.690 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:52:25.690Z,1505850745.690 [BPC1] No Fault, FailCount= 1
2017-09-19T19:53:05.627Z,1505850785.627 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T19:53:05.627Z,1505850785.627 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:53:05.627Z,1505850785.627 [BPC1](ERROR): Data Fault
2017-09-19T19:53:05.726Z,1505850785.726 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:53:06.881Z,1505850786.881 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:53:06.881Z,1505850786.881 [BPC1] No Fault, FailCount= 1
2017-09-19T19:53:33.455Z,1505850813.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:34.247Z,1505850814.247 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:34.655Z,1505850814.655 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:39.428Z,1505850819.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:40.223Z,1505850820.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:40.637Z,1505850820.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:41.431Z,1505850821.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:42.226Z,1505850822.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:42.637Z,1505850822.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:43.430Z,1505850823.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:44.224Z,1505850824.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:44.632Z,1505850824.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:45.425Z,1505850825.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:46.221Z,1505850826.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:53:46.659Z,1505850826.659 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:54:37.660Z,1505850877.660 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T19:54:37.660Z,1505850877.660 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:54:37.660Z,1505850877.660 [BPC1](ERROR): Data Fault
2017-09-19T19:54:37.714Z,1505850877.714 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:54:38.907Z,1505850878.907 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:54:38.907Z,1505850878.907 [BPC1] No Fault, FailCount= 1
2017-09-19T19:55:04.948Z,1505850904.948 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-19T19:56:19.063Z,1505850979.063 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-19T19:56:19.064Z,1505850979.064 [Default:CheckIn:C.Wait] Stopped
2017-09-19T19:56:19.064Z,1505850979.064 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-19T19:56:19.064Z,1505850979.064 [Default:CheckIn:D] Running Loop=1
2017-09-19T19:56:19.489Z,1505850979.489 [Default:CheckIn:D] Stopped
2017-09-19T19:56:19.489Z,1505850979.489 [Default:CheckIn:E] Running Loop=1
2017-09-19T19:56:19.867Z,1505850979.867 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 17.189105 min 
2017-09-19T19:56:19.868Z,1505850979.868 [Default:CheckIn:E] Stopped
2017-09-19T19:56:19.868Z,1505850979.868 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-19T19:56:19.868Z,1505850979.868 [Default:CheckIn] Stopped
2017-09-19T19:56:19.868Z,1505850979.868 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-19T19:56:19.869Z,1505850979.869 [Default:CheckIn](INFO): Running loop #3
2017-09-19T19:56:19.869Z,1505850979.869 [Default:CheckIn] Running Loop=3
2017-09-19T19:56:19.869Z,1505850979.869 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-19T19:56:19.869Z,1505850979.869 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-19T19:56:23.785Z,1505850983.785 [NAL9602](INFO): Powering up
2017-09-19T19:56:34.970Z,1505850994.970 [NAL9602](INFO): NAL9602 initialized
2017-09-19T19:56:35.771Z,1505850995.771 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-09-19T19:56:35.771Z,1505850995.771 [NAL9602] Data Fault, FailCount= 2
2017-09-19T19:56:35.771Z,1505850995.771 [NAL9602](ERROR): Data Fault
2017-09-19T19:56:35.887Z,1505850995.887 [CBIT](ERROR): Data Fault in component: NAL9602
2017-09-19T19:56:36.215Z,1505850996.215 [NAL9602](INFO): Powering down
2017-09-19T19:56:37.057Z,1505850997.057 [CBIT](INFO): Clearing failed state for component NAL9602
2017-09-19T19:56:37.057Z,1505850997.057 [NAL9602] No Fault, FailCount= 2
2017-09-19T19:56:41.376Z,1505851001.376 [NAL9602](INFO): Powering up NAL9602
2017-09-19T19:56:52.574Z,1505851012.574 [NAL9602](INFO): NAL9602 initialized
2017-09-19T19:57:03.394Z,1505851023.394 [BPC1](ERROR): Failed to parse message.
2017-09-19T19:57:03.394Z,1505851023.394 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T19:57:03.394Z,1505851023.394 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:57:03.394Z,1505851023.394 [BPC1](ERROR): Data Fault
2017-09-19T19:57:03.462Z,1505851023.462 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:57:04.643Z,1505851024.643 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:57:04.643Z,1505851024.643 [BPC1] No Fault, FailCount= 1
2017-09-19T19:58:43.445Z,1505851123.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:58:44.238Z,1505851124.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:58:44.642Z,1505851124.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:58:45.436Z,1505851125.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:58:46.232Z,1505851126.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:58:46.653Z,1505851126.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T19:59:38.033Z,1505851178.033 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T19:59:38.033Z,1505851178.033 [BPC1] Data Fault, FailCount= 1
2017-09-19T19:59:38.033Z,1505851178.033 [BPC1](ERROR): Data Fault
2017-09-19T19:59:38.085Z,1505851178.085 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T19:59:39.278Z,1505851179.278 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T19:59:39.278Z,1505851179.278 [BPC1] No Fault, FailCount= 1
2017-09-19T20:01:20.144Z,1505851280.144 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-09-19T19:56:19.9Z
2017-09-19T20:01:20.144Z,1505851280.144 [Default:CheckIn:Read_GPS] Stopped
2017-09-19T20:01:20.145Z,1505851280.145 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-19T20:01:24.768Z,1505851284.768 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20170919T193449/Courier0012.lzma
2017-09-19T20:01:25.558Z,1505851285.558 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Courier0012.lzma.bak
2017-09-19T20:01:25.558Z,1505851285.558 [DataOverHttps](INFO): SBD MOMSN=5096142
2017-09-19T20:01:35.572Z,1505851295.572 [DataOverHttps](INFO): Sending 214 bytes from file Logs/20170919T193449/Express0013.lzma
2017-09-19T20:01:36.381Z,1505851296.381 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Express0013.lzma.bak
2017-09-19T20:01:36.381Z,1505851296.381 [DataOverHttps](INFO): SBD MOMSN=5096144
2017-09-19T20:01:37.370Z,1505851297.370 [Default:CheckIn:Read_Iridium] Stopped
2017-09-19T20:01:37.370Z,1505851297.370 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-19T20:01:37.370Z,1505851297.370 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-19T20:01:56.142Z,1505851316.142 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-19T20:02:01.743Z,1505851321.743 [NAL9602](INFO): Powering down
2017-09-19T20:03:23.114Z,1505851403.114 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-19T20:03:23.114Z,1505851403.114 [BPC1] Data Fault, FailCount= 1
2017-09-19T20:03:23.114Z,1505851403.114 [BPC1](ERROR): Data Fault
2017-09-19T20:03:23.164Z,1505851403.164 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T20:03:24.364Z,1505851404.364 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T20:03:24.364Z,1505851404.364 [BPC1] No Fault, FailCount= 1
2017-09-19T20:03:45.450Z,1505851425.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:03:46.243Z,1505851426.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:03:46.656Z,1505851426.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:05:05.122Z,1505851505.122 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-19T20:05:13.433Z,1505851513.433 [BPC1](ERROR): Failed to receive battery data
2017-09-19T20:05:13.433Z,1505851513.433 [BPC1] Communications Fault, FailCount= 1
2017-09-19T20:05:13.433Z,1505851513.433 [BPC1](ERROR): Communications Fault
2017-09-19T20:05:13.495Z,1505851513.495 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-19T20:05:14.653Z,1505851514.653 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T20:05:14.654Z,1505851514.654 [BPC1] No Fault, FailCount= 1
2017-09-19T20:06:37.863Z,1505851597.863 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-19T20:06:37.863Z,1505851597.863 [Default:CheckIn:C.Wait] Stopped
2017-09-19T20:06:37.863Z,1505851597.863 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-19T20:06:37.863Z,1505851597.863 [Default:CheckIn:D] Running Loop=1
2017-09-19T20:06:38.281Z,1505851598.281 [Default:CheckIn:D] Stopped
2017-09-19T20:06:38.281Z,1505851598.281 [Default:CheckIn:E] Running Loop=1
2017-09-19T20:06:38.622Z,1505851598.622 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 27.502293 min 
2017-09-19T20:06:38.622Z,1505851598.622 [Default:CheckIn:E] Stopped
2017-09-19T20:06:38.622Z,1505851598.622 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-19T20:06:38.623Z,1505851598.623 [Default:CheckIn] Stopped
2017-09-19T20:06:38.623Z,1505851598.623 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-19T20:06:38.623Z,1505851598.623 [Default:CheckIn](INFO): Running loop #4
2017-09-19T20:06:38.623Z,1505851598.623 [Default:CheckIn] Running Loop=4
2017-09-19T20:06:38.623Z,1505851598.623 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-19T20:06:38.624Z,1505851598.624 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-19T20:06:42.358Z,1505851602.358 [NAL9602](INFO): Powering up
2017-09-19T20:06:53.172Z,1505851613.172 [NAL9602](INFO): NAL9602 initialized
2017-09-19T20:06:53.959Z,1505851613.959 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-09-19T20:06:53.960Z,1505851613.960 [NAL9602] Data Fault, FailCount= 3
2017-09-19T20:06:53.960Z,1505851613.960 [NAL9602](ERROR): Data Fault
2017-09-19T20:06:54.135Z,1505851614.135 [CBIT](ERROR): Data Fault in component: NAL9602
2017-09-19T20:06:54.365Z,1505851614.365 [NAL9602](INFO): Powering down
2017-09-19T20:06:55.292Z,1505851615.292 [CBIT](INFO): Clearing failed state for component NAL9602
2017-09-19T20:06:55.292Z,1505851615.292 [NAL9602] No Fault, FailCount= 3
2017-09-19T20:06:55.463Z,1505851615.463 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:06:56.256Z,1505851616.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:06:56.660Z,1505851616.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:06:57.994Z,1505851617.994 [PNI_TCM](ERROR): CRC does not match. Expected:0x25900 got:0x1347
2017-09-19T20:06:59.564Z,1505851619.564 [NAL9602](INFO): Powering up NAL9602
2017-09-19T20:07:01.189Z,1505851621.189 [PNI_TCM](ERROR): CRC does not match. Expected:0x30744 got:0x145
2017-09-19T20:07:01.440Z,1505851621.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:02.233Z,1505851622.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:02.654Z,1505851622.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:02.804Z,1505851622.804 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-19T20:07:03.447Z,1505851623.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:04.241Z,1505851624.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:04.645Z,1505851624.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:05.438Z,1505851625.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:06.232Z,1505851626.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:06.640Z,1505851626.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:07:10.751Z,1505851630.751 [NAL9602](INFO): NAL9602 initialized
2017-09-19T20:08:35.457Z,1505851715.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:08:36.250Z,1505851716.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:08:36.666Z,1505851716.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:09:52.116Z,1505851792.116 [NAL9602](INFO): SBD MO Status=0, MOMSN=549, MT Status=0, MTMSN=0
2017-09-19T20:09:52.116Z,1505851792.116 [NAL9602](INFO): No messages in MT queue
2017-09-19T20:09:53.325Z,1505851793.325 [NAL9602](INFO): GPS fix at 20170919T200951: (36.802835, -121.787952)
2017-09-19T20:09:53.402Z,1505851793.402 [Default:CheckIn:Read_GPS] Stopped
2017-09-19T20:09:53.403Z,1505851793.403 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-19T20:09:58.705Z,1505851798.705 [DataOverHttps](INFO): Sending 81 bytes from file Logs/20170919T193449/Courier0016.lzma
2017-09-19T20:09:59.511Z,1505851799.511 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Courier0016.lzma.bak
2017-09-19T20:09:59.511Z,1505851799.511 [DataOverHttps](INFO): SBD MOMSN=5096149
2017-09-19T20:10:00.573Z,1505851800.573 [NAL9602](INFO): Powering down
2017-09-19T20:10:12.722Z,1505851812.722 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20170919T193449/Express0017.lzma
2017-09-19T20:10:13.621Z,1505851813.621 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Express0017.lzma.bak
2017-09-19T20:10:13.621Z,1505851813.621 [DataOverHttps](INFO): SBD MOMSN=5096152
2017-09-19T20:10:15.337Z,1505851815.337 [Default:CheckIn:Read_Iridium] Stopped
2017-09-19T20:10:15.337Z,1505851815.337 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-19T20:10:15.337Z,1505851815.337 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-19T20:11:51.426Z,1505851911.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:52.222Z,1505851912.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:52.636Z,1505851912.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:53.430Z,1505851913.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:54.223Z,1505851914.223 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:54.631Z,1505851914.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:55.425Z,1505851915.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:56.220Z,1505851916.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:56.665Z,1505851916.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:57.456Z,1505851917.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:58.249Z,1505851918.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:11:58.653Z,1505851918.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:12:01.438Z,1505851921.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:12:02.232Z,1505851922.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:12:02.636Z,1505851922.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:12:03.429Z,1505851923.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:12:04.224Z,1505851924.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:12:04.643Z,1505851924.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:13:31.513Z,1505852011.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:13:32.306Z,1505852012.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:13:32.710Z,1505852012.710 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:14:01.490Z,1505852041.490 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-19T20:14:01.490Z,1505852041.490 [BPC1] Data Fault, FailCount= 1
2017-09-19T20:14:01.491Z,1505852041.491 [BPC1](ERROR): Data Fault
2017-09-19T20:14:01.575Z,1505852041.575 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T20:14:02.773Z,1505852042.773 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T20:14:02.774Z,1505852042.774 [BPC1] No Fault, FailCount= 1
2017-09-19T20:14:15.513Z,1505852055.513 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-19T20:14:15.513Z,1505852055.513 [BPC1] Data Fault, FailCount= 2
2017-09-19T20:14:15.514Z,1505852055.514 [BPC1](ERROR): Data Fault
2017-09-19T20:14:15.570Z,1505852055.570 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-19T20:14:16.765Z,1505852056.765 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-19T20:14:16.765Z,1505852056.765 [BPC1] No Fault, FailCount= 2
2017-09-19T20:15:05.320Z,1505852105.320 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-19T20:15:15.777Z,1505852115.777 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-19T20:15:15.777Z,1505852115.777 [Default:CheckIn:C.Wait] Stopped
2017-09-19T20:15:15.777Z,1505852115.777 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-19T20:15:15.777Z,1505852115.777 [Default:CheckIn:D] Running Loop=1
2017-09-19T20:15:16.080Z,1505852116.080 [Default:CheckIn:D] Stopped
2017-09-19T20:15:16.080Z,1505852116.080 [Default:CheckIn:E] Running Loop=1
2017-09-19T20:15:16.525Z,1505852116.525 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 36.132284 min 
2017-09-19T20:15:16.525Z,1505852116.525 [Default:CheckIn:E] Stopped
2017-09-19T20:15:16.525Z,1505852116.525 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-19T20:15:16.525Z,1505852116.525 [Default:CheckIn] Stopped
2017-09-19T20:15:16.539Z,1505852116.539 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-19T20:15:16.539Z,1505852116.539 [Default:CheckIn](INFO): Running loop #5
2017-09-19T20:15:16.539Z,1505852116.539 [Default:CheckIn] Running Loop=5
2017-09-19T20:15:16.539Z,1505852116.539 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-19T20:15:16.540Z,1505852116.540 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-19T20:15:22.575Z,1505852122.575 [NAL9602](INFO): Powering up
2017-09-19T20:15:29.467Z,1505852129.467 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:30.260Z,1505852130.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:30.665Z,1505852130.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:31.458Z,1505852131.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:32.252Z,1505852132.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:32.656Z,1505852132.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:33.449Z,1505852133.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:33.559Z,1505852133.559 [NAL9602](INFO): NAL9602 initialized
2017-09-19T20:15:34.243Z,1505852134.243 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:34.647Z,1505852134.647 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:35.440Z,1505852135.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:36.234Z,1505852136.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:36.638Z,1505852136.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:37.432Z,1505852137.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:38.226Z,1505852138.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:38.637Z,1505852138.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:39.431Z,1505852139.431 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:40.226Z,1505852140.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:40.640Z,1505852140.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:41.434Z,1505852141.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:42.228Z,1505852142.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:42.648Z,1505852142.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:42.810Z,1505852142.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x8335 got:0x31513
2017-09-19T20:15:43.441Z,1505852143.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:44.235Z,1505852144.235 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:44.639Z,1505852144.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:45.432Z,1505852145.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:46.227Z,1505852146.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:46.698Z,1505852146.698 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:47.492Z,1505852147.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:48.285Z,1505852148.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:48.689Z,1505852148.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:49.483Z,1505852149.483 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:50.276Z,1505852150.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:50.680Z,1505852150.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:51.474Z,1505852151.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:52.267Z,1505852152.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:52.672Z,1505852152.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:53.465Z,1505852153.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:54.258Z,1505852154.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:54.663Z,1505852154.663 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:55.456Z,1505852155.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:56.249Z,1505852156.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:56.654Z,1505852156.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:57.447Z,1505852157.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:58.241Z,1505852158.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:58.645Z,1505852158.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:15:59.438Z,1505852159.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:00.232Z,1505852160.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:00.640Z,1505852160.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:01.434Z,1505852161.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:02.228Z,1505852162.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:02.639Z,1505852162.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:03.435Z,1505852163.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:04.228Z,1505852164.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:04.639Z,1505852164.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:05.432Z,1505852165.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:06.227Z,1505852166.227 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:06.662Z,1505852166.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:07.455Z,1505852167.455 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:08.248Z,1505852168.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:08.653Z,1505852168.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:09.446Z,1505852169.446 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:10.240Z,1505852170.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:10.644Z,1505852170.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:11.437Z,1505852171.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:12.231Z,1505852172.231 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:12.639Z,1505852172.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:13.432Z,1505852173.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:14.228Z,1505852174.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:14.642Z,1505852174.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:15.436Z,1505852175.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:16.230Z,1505852176.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:16.654Z,1505852176.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:17.447Z,1505852177.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:18.240Z,1505852178.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:18.665Z,1505852178.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:19.458Z,1505852179.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:20.251Z,1505852180.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:20.664Z,1505852180.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:21.457Z,1505852181.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:22.251Z,1505852182.251 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:22.687Z,1505852182.687 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:45.435Z,1505852205.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:46.230Z,1505852206.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:46.657Z,1505852206.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:53.456Z,1505852213.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:54.249Z,1505852214.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:54.654Z,1505852214.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:57.442Z,1505852217.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:58.236Z,1505852218.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:58.640Z,1505852218.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:16:59.434Z,1505852219.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:17:00.228Z,1505852220.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:17:00.635Z,1505852220.635 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:17:01.429Z,1505852221.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:17:02.224Z,1505852222.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:17:02.642Z,1505852222.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:17:03.436Z,1505852223.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:17:04.230Z,1505852224.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:17:04.654Z,1505852224.654 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:27.425Z,1505852307.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:28.219Z,1505852308.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:28.630Z,1505852308.630 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:29.424Z,1505852309.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:30.219Z,1505852310.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:30.641Z,1505852310.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:31.435Z,1505852311.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:32.228Z,1505852312.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:32.633Z,1505852312.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:33.426Z,1505852313.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:34.221Z,1505852314.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:34.632Z,1505852314.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:35.425Z,1505852315.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:36.221Z,1505852316.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:36.631Z,1505852316.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:37.424Z,1505852317.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:38.219Z,1505852318.219 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:38.634Z,1505852318.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:39.428Z,1505852319.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:40.222Z,1505852320.222 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:18:40.633Z,1505852320.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:19:11.929Z,1505852351.929 [NAL9602](INFO): SBD MO Status=2, MOMSN=550, MT Status=2, MTMSN=0
2017-09-19T20:19:11.929Z,1505852351.929 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-19T20:19:57.411Z,1505852397.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:19:58.206Z,1505852398.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:19:58.624Z,1505852398.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:19:59.418Z,1505852399.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:00.213Z,1505852400.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:00.624Z,1505852400.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:01.417Z,1505852401.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:02.212Z,1505852402.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:02.623Z,1505852402.623 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:03.416Z,1505852403.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:04.211Z,1505852404.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:04.622Z,1505852404.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:05.416Z,1505852405.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:06.211Z,1505852406.211 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:06.641Z,1505852406.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:07.435Z,1505852407.435 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:08.229Z,1505852408.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:08.637Z,1505852408.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:09.430Z,1505852409.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:10.228Z,1505852410.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:10.640Z,1505852410.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:11.433Z,1505852411.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:12.228Z,1505852412.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:12.643Z,1505852412.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:13.437Z,1505852413.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:14.230Z,1505852414.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:14.646Z,1505852414.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:15.440Z,1505852415.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:16.234Z,1505852416.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:16.653Z,1505852416.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:16.872Z,1505852416.872 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-09-19T20:15:16.5Z
2017-09-19T20:20:16.881Z,1505852416.881 [Default:CheckIn:Read_GPS] Stopped
2017-09-19T20:20:16.882Z,1505852416.882 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-19T20:20:17.447Z,1505852417.447 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:18.240Z,1505852418.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:18.684Z,1505852418.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:19.478Z,1505852419.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:20.271Z,1505852420.271 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:20.676Z,1505852420.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-09-19T20:20:33.939Z,1505852433.939 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20170919T193449/Courier0020.lzma
2017-09-19T20:20:34.623Z,1505852434.623 [DataOverHttps](INFO): Moved sent file to Logs/20170919T193449/Courier0020.lzma.bak
2017-09-19T20:20:34.623Z,1505852434.623 [DataOverHttps](INFO): SBD MOMSN=5096158
2017-09-19T20:20:36.186Z,1505852436.186 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-19T20:20:41.072Z,1505852441.072 [CommandLine](IMPORTANT): got command restart application
2017-09-19T20:20:41.534Z,1505852441.534 [NAL9602](INFO): Powering down
2017-09-19T20:20:42.076Z,1505852442.076 [Supervisor](INFO): Stop Mission called by Supervisor::terminate
2017-09-19T20:20:42.082Z,1505852442.082 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:42.082Z,1505852442.082 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.088Z,1505852442.088 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2017-09-19T20:20:42.089Z,1505852442.089 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.089Z,1505852442.089 [CommandLine](INFO): Join timeout helper Thread ID is 1090
2017-09-19T20:20:42.091Z,1505852442.091 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2017-09-19T20:20:42.091Z,1505852442.091 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.091Z,1505852442.091 [NavChartDb](INFO): Join timeout helper Thread ID is 1091
2017-09-19T20:20:42.201Z,1505852442.201 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:42.201Z,1505852442.201 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.221Z,1505852442.221 [ComponentRegistry](INFO): Shutting down Rowe_600LCM ThreadHandler
2017-09-19T20:20:42.221Z,1505852442.221 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.221Z,1505852442.221 [Rowe_600LCM](INFO): Join timeout helper Thread ID is 1092
2017-09-19T20:20:42.610Z,1505852442.610 [Rowe_600LCM ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:42.610Z,1505852442.610 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-09-19T20:20:42.849Z,1505852442.849 [Rowe_600LCM](INFO): Powering down
2017-09-19T20:20:42.851Z,1505852442.851 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.866Z,1505852442.866 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2017-09-19T20:20:42.866Z,1505852442.866 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.867Z,1505852442.867 [Radio_Surface](INFO): Join timeout helper Thread ID is 1094
2017-09-19T20:20:42.922Z,1505852442.922 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:42.923Z,1505852442.923 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.934Z,1505852442.934 [ComponentRegistry](INFO): Shutting down WetLabsBB2FL ThreadHandler
2017-09-19T20:20:42.934Z,1505852442.934 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:42.934Z,1505852442.934 [WetLabsBB2FL](INFO): Join timeout helper Thread ID is 1095
2017-09-19T20:20:43.299Z,1505852443.299 [WetLabsBB2FL ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:43.299Z,1505852443.299 [WetLabsBB2FL](INFO): Powering down
2017-09-19T20:20:43.300Z,1505852443.300 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:43.319Z,1505852443.319 [ComponentRegistry](INFO): Shutting down CTD_Seabird ThreadHandler
2017-09-19T20:20:43.320Z,1505852443.320 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:43.320Z,1505852443.320 [CTD_Seabird](INFO): Join timeout helper Thread ID is 1096
2017-09-19T20:20:43.707Z,1505852443.707 [CTD_Seabird ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:43.869Z,1505852443.869 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-09-19T20:20:43.869Z,1505852443.869 [CTD_Seabird](INFO): Powering down
2017-09-19T20:20:43.870Z,1505852443.870 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:43.888Z,1505852443.888 [ComponentRegistry](INFO): Shutting down CTD_NeilBrown ThreadHandler
2017-09-19T20:20:43.888Z,1505852443.888 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:43.889Z,1505852443.889 [CTD_NeilBrown](INFO): Join timeout helper Thread ID is 1098
2017-09-19T20:20:44.208Z,1505852444.208 [CTD_NeilBrown ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:44.208Z,1505852444.208 [CTD_NeilBrown](INFO): Powering down
2017-09-19T20:20:44.209Z,1505852444.209 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:44.233Z,1505852444.233 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2017-09-19T20:20:44.233Z,1505852444.233 [logger ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:44.234Z,1505852444.234 [logger](INFO): Join timeout helper Thread ID is 1099
2017-09-19T20:20:44.240Z,1505852444.240 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:44.241Z,1505852444.241 [logger ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:44.261Z,1505852444.261 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2017-09-19T20:20:44.261Z,1505852444.261 [CommandLine ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:44.261Z,1505852444.261 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2017-09-19T20:20:44.261Z,1505852444.261 [controlThread ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:44.262Z,1505852444.262 [controlThread](INFO): Join timeout helper Thread ID is 1100
2017-09-19T20:20:46.792Z,1505852446.792 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2017-09-19T20:20:46.793Z,1505852446.793 [controlThread](DEBUG): Uninitializing ControlThread
2017-09-19T20:20:46.793Z,1505852446.793 [Aanderaa_O2](INFO): Powering down
2017-09-19T20:20:46.798Z,1505852446.798 [NAL9602](INFO): Powering down
2017-09-19T20:20:46.799Z,1505852446.799 [DAT](INFO): Powering down
2017-09-19T20:20:46.920Z,1505852446.920 [PNI_TCM](INFO): Powering down
2017-09-19T20:20:47.009Z,1505852447.009 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-09-19T20:20:47.011Z,1505852447.011 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2017-09-19T20:20:47.012Z,1505852447.012 [MissionManager](INFO): Uninitializing Mission Default
2017-09-19T20:20:47.012Z,1505852447.012 [Default] Stopped
2017-09-19T20:20:47.012Z,1505852447.012 [Default](DEBUG): Aggregate::uninitialize Default
2017-09-19T20:20:47.012Z,1505852447.012 [Default:B.GoToSurface] Stopped
2017-09-19T20:20:47.012Z,1505852447.012 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-09-19T20:20:47.012Z,1505852447.012 [Default:CheckIn] Stopped
2017-09-19T20:20:47.012Z,1505852447.012 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-19T20:20:47.013Z,1505852447.013 [Default:CheckIn:Read_Iridium] Stopped
2017-09-19T20:20:47.017Z,1505852447.017 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2017-09-19T20:20:47.017Z,1505852447.017 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2017-09-19T20:20:47.017Z,1505852447.017 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2017-09-19T20:20:47.018Z,1505852447.018 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2017-09-19T20:20:47.018Z,1505852447.018 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-09-19T20:20:47.018Z,1505852447.018 [BuoyancyServo](INFO): Powering down
2017-09-19T20:20:47.032Z,1505852447.032 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2017-09-19T20:20:47.033Z,1505852447.033 [ElevatorServo](INFO): Powering down
2017-09-19T20:20:47.033Z,1505852447.033 [MassServo](DEBUG): Uninitialize Mass Servo.
2017-09-19T20:20:47.034Z,1505852447.034 [MassServo](INFO): Powering down
2017-09-19T20:20:47.035Z,1505852447.035 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2017-09-19T20:20:47.035Z,1505852447.035 [RudderServo](INFO): Powering down
2017-09-19T20:20:47.036Z,1505852447.036 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2017-09-19T20:20:47.036Z,1505852447.036 [ThrusterServo](INFO): Powering down
2017-09-19T20:20:47.037Z,1505852447.037 [SBIT](DEBUG): Uninitialize SBIT Component.
2017-09-19T20:20:47.037Z,1505852447.037 [IBIT](DEBUG): Uninitialize IBIT Component.
2017-09-19T20:20:47.037Z,1505852447.037 [CBIT](DEBUG): Uninitialize CBIT Component.
2017-09-19T20:20:47.039Z,1505852447.039 [controlThread ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:47.140Z,1505852447.140 [WetLabsBB2FL ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:47.151Z,1505852447.151 [CTD_Seabird ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:47.154Z,1505852447.154 [CTD_NeilBrown ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:47.273Z,1505852447.273 [Rowe_600LCM ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:47.293Z,1505852447.293 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:50.123Z,1505852450.123 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2017-09-19T20:20:50.371Z,1505852450.371 [logger ThreadHandler](INFO): Thread cancelled.