daphne Path

trajectory

20170913T231033 [CommandLine]:got command restart logs

20170913T231037 [BPC1]:Failed to receive battery data

20170913T231037 [BPC1]:Communications Fault

20170913T231037 [CBIT]:Communications Fault in component: BPC1

20170913T231121 [BPC1]:Failed to receive battery data

20170913T231121 [BPC1]:Communications Fault

20170913T231121 [CBIT]:Communications Fault in component: BPC1

20170913T231306 [BPC1]:Failed to receive battery data

20170913T231306 [BPC1]:Communications Fault

20170913T231306 [CBIT]:Communications Fault in component: BPC1

20170913T231557 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20170913T231831 [BPC1]:Failed to parse bank A battery data

20170913T231831 [CBIT]:Data Fault in component: BPC1

20170913T232029 [BPC1]:Failed to parse message.

20170913T232029 [BPC1]:Failed to parse bank A battery data

20170913T232029 [CBIT]:Data Fault in component: BPC1

20170913T232149 [Default:CheckIn:E]:Default mission has been running for 11.305499 min

20170913T232201 [NAL9602]:GPS failed to acquire within timeout.

20170913T232201 [CBIT]:Data Fault in component: NAL9602

20170913T232819 [Default:CheckIn:E]:Default mission has been running for 17.857823 min

20170913T233645 [Default:CheckIn:E]:Default mission has been running for 26.291030 min

20170913T233905 [PNI_TCM]:CRC does not match. Expected:0x50555 got:0x25880

20170913T233931 [PNI_TCM]:CRC does not match. Expected:0x14800 got:0x207

20170913T233942 [PNI_TCM]:CRC does not match. Expected:0x58695 got:0x41215

20170913T234202 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20170913T234720 [NAL9602]:GPS failed to acquire within timeout.

20170913T234720 [CBIT]:Data Fault in component: NAL9602

20170913T235008 [NAL9602]:Failed to initiate SBD session. Error code: 2

20170913T235045 [NAL9602]:Failed to initiate SBD session. Error code: 2

20170913T235345 [DAT]:Communications Fault

20170913T235345 [CBIT]:Communications Fault in component: DAT

20170913T235445 [DAT]:Communications Fault

20170913T235445 [CBIT]:Communications Fault in component: DAT

20170913T235446 [BPC1]:Failed to parse bank A battery data

20170913T235446 [CBIT]:Data Fault in component: BPC1

20170913T235623 [DAT]:Communications Fault

20170913T235624 [CBIT]:Communications Fault in component: DAT

20170913T235727 [DAT]:failed to initialize; deviceResponse_ loaded: , available: 8 , LVL= 32752, 32753

20170913T235831 [DAT]:failed to initialize; deviceResponse_ loaded: , available:

20170913T235935 [DAT]:failed to initialize; deviceResponse_ loaded: , available:

20170914T000003 [BPC1]:Failed to parse bank B battery data

20170914T000038 [DAT]:failed to initialize; deviceResponse_ loaded: , available:

20170914T000047 [BPC1]:Failed to parse message.

20170914T000047 [BPC1]:Failed to parse bank B battery data

20170914T000246 [CommandLine]:Scheduling is paused

20170914T000649 [NAL9602]:Failed to initiate SBD session. Error code: 2

20170914T000945 [BPC1]:Failed to parse message.

20170914T000958 [BPC1]:Failed to parse bank B battery data

20170914T001202 [DAT]:failed to initialize; deviceResponse_ loaded: , available: .9## | DatVerbose | 27504 | 0..65535## | RXonDAT | Dis | Ena, Dis## | Orientation

20170914T003845 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20170914T004400 [NAL9602]:GPS failed to acquire within timeout.

20170914T004400 [CBIT]:Data Fault in component: NAL9602

20170914T011531 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20170914T011942 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20170914T011942 [Rowe_600LCM]:Communications Fault

20170914T011942 [CBIT]:Communications Fault in component: Rowe_600LCM

20170914T011943 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20170914T011943 [Rowe_600LCM]:Hardware Fault

20170914T012550 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20170914T030701 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20170914T044137 [CBIT]:Beginning ground fault scan

20170914T050135 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20170914T050135 [Rowe_600LCM]:Communications Fault

20170914T050136 [CBIT]:Communications Fault in component: Rowe_600LCM

20170914T052443 [Rowe_600LCM]:Did not receive valid device response within the specified allowable sample time.

20170914T052443 [Rowe_600LCM]:Communications Fault

20170914T052443 [CBIT]:Communications Fault in component: Rowe_600LCM

20170914T065801 [NAL9602]:Queried for signal strength and failed to receive proper response. no error

20170914T065801 [NAL9602]:received: ##COMMAND MODE: Started####COMMAND MODE: Ready for Input##

20170914T075050 [NAL9602]:Inadequate Iridium signal strength reported: 0

20170914T075055 [NAL9602]:Inadequate Iridium signal strength reported: 0

20170914T075119 [NAL9602]:Inadequate Iridium signal strength reported: 0

20170914T104147 [CBIT]:Beginning ground fault scan

20170914T122156 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20170914T122156 [Rowe_600LCM]:Hardware Fault

20170914T122215 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: allowance for input measurements to start up has expired, velocity or orientation is invalid, and horizontal path length since last fix is nonzero.

20170914T122215 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20170914T122215 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20170914T164213 [CBIT]:Beginning ground fault scan

20170914T170433 [PNI_TCM]:Failed to acquire valid data within timeout.

20170914T170434 [CBIT]:Data Fault in component: PNI_TCM

20170914T212235 [PNI_TCM]:Failed to acquire valid data within timeout.

20170914T212235 [CBIT]:Data Fault in component: PNI_TCM

20170914T212244 [PNI_TCM]:Failed to set parameters during initialization.

20170914T212244 [CBIT]:Data Fault in component: PNI_TCM

20170914T212245 [PNI_TCM]:LCB fault: Current Limiter Activated.

20170914T212245 [PNI_TCM]:Hardware Fault

20170914T212256 [PNI_TCM]:Failed to set parameters during initialization.

20170914T212305 [PNI_TCM]:Failed to set parameters during initialization.

20170914T212434 [DeadReckonUsingMultipleVelocitySources]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20170914T212434 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20170914T212434 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: allowance for input measurements to start up has expired, velocity or orientation is invalid, and horizontal path length since last fix is nonzero.

20170914T212434 [DeadReckonUsingSpeedCalculator]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20170914T212434 [DeadReckonUsingSpeedCalculator]:Software Fault

20170914T212434 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20170914T212434 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20170914T212635 [DeadReckonUsingMultipleVelocitySources]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20170914T212635 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20170914T212635 [DeadReckonUsingSpeedCalculator]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20170914T212635 [DeadReckonUsingSpeedCalculator]:Software Fault

20170914T212635 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20170914T212635 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20170914T212836 [DeadReckonUsingMultipleVelocitySources]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20170914T212836 [DeadReckonUsingSpeedCalculator]:Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds.

20170914T212836 [DeadReckonUsingSpeedCalculator]:Software Fault

20170914T212836 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20170914T214140 [DropWeight]:DROP WEIGHT MISSING.#

20170914T214140 [DropWeight]:Hardware Fault

20170914T214141 [CBIT]:Hardware Fault in component: DropWeight

20170914T222643 [DropWeight]:DROP WEIGHT MISSING.#

20170914T222643 [DropWeight]:Hardware Fault

20170914T222643 [CBIT]:Hardware Fault in component: DropWeight

20170914T231144 [DropWeight]:DROP WEIGHT MISSING.#

20170914T231144 [DropWeight]:Hardware Fault

20170914T231144 [CBIT]:Hardware Fault in component: DropWeight

20170915T003938 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20170915T004437 [CommandLine]:Deactivating dropweight wire

20170915T024940 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20170915T025440 [CommandLine]:Deactivating dropweight wire

20170915T045942 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20170915T050442 [CommandLine]:Deactivating dropweight wire

20170915T131057 [Rowe_600LCM]:LCB fault: Software Overcurrent.

20170915T131057 [Rowe_600LCM]:Hardware Fault

20170915T183132 [Rowe_600LCM]:LCB fault: Current Limiter Activated.

20170916T004153 [PAR_Licor]:Data Fault

20170916T004153 [CBIT]:Data Fault in component: PAR_Licor

20170916T152903 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: allowance for input measurements to start up has expired, velocity or orientation is invalid, and horizontal path length since last fix is nonzero.