2017-09-12T18:57:24.767Z,1505242644.767 [Supervisor](DEBUG): Initializing supervisor.
2017-09-12T18:57:24.772Z,1505242644.772 [SyncHandler](DEBUG): Created PCaller Thread at 4051A4E0
2017-09-12T18:57:24.772Z,1505242644.772 [SyncHandler](INFO): Protected caller Thread ID is 5112
2017-09-12T18:57:24.773Z,1505242644.773 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-09-12T18:57:24.774Z,1505242644.774 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4054A4E0
2017-09-12T18:57:24.774Z,1505242644.774 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 5113
2017-09-12T18:57:24.779Z,1505242644.779 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-09-12T18:57:24.794Z,1505242644.794 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-09-12T18:57:24.796Z,1505242644.796 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4057A4E0
2017-09-12T18:57:24.796Z,1505242644.796 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 5114
2017-09-12T18:57:24.797Z,1505242644.797 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-09-12T18:57:24.798Z,1505242644.798 [logger ThreadHandler](DEBUG): Created PCaller Thread at 405AA4E0
2017-09-12T18:57:24.798Z,1505242644.798 [logger ThreadHandler](INFO): Protected caller Thread ID is 5115
2017-09-12T18:57:24.801Z,1505242644.801 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-09-12T18:57:24.802Z,1505242644.802 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-09-12T18:57:24.803Z,1505242644.803 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-09-12T18:57:25.006Z,1505242645.006 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-09-12T18:57:25.006Z,1505242645.006 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-09-12T18:57:25.148Z,1505242645.148 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-09-12T18:57:25.149Z,1505242645.149 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-09-12T18:57:25.532Z,1505242645.532 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-09-12T18:57:25.532Z,1505242645.532 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-09-12T18:57:25.687Z,1505242645.687 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-09-12T18:57:25.688Z,1505242645.688 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-09-12T18:57:25.772Z,1505242645.772 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-09-12T18:57:25.996Z,1505242645.996 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-09-12T18:57:25.997Z,1505242645.997 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-09-12T18:57:26.106Z,1505242646.106 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-09-12T18:57:26.106Z,1505242646.106 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-09-12T18:57:26.439Z,1505242646.439 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-09-12T18:57:26.440Z,1505242646.440 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-09-12T18:57:26.865Z,1505242646.865 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-09-12T18:57:26.866Z,1505242646.866 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-09-12T18:57:27.219Z,1505242647.219 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-09-12T18:57:27.219Z,1505242647.219 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-09-12T18:57:27.835Z,1505242647.835 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-09-12T18:57:27.835Z,1505242647.835 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-09-12T18:57:28.048Z,1505242648.048 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-09-12T18:57:28.048Z,1505242648.048 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-09-12T18:57:28.154Z,1505242648.154 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-09-12T18:57:28.155Z,1505242648.155 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-09-12T18:57:28.707Z,1505242648.707 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-09-12T18:57:28.707Z,1505242648.707 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-09-12T18:57:28.823Z,1505242648.823 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-09-12T18:57:28.825Z,1505242648.825 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-daphne/
2017-09-12T18:57:28.826Z,1505242648.826 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Battery.cfg
2017-09-12T18:57:29.126Z,1505242649.126 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-09-12T18:57:29.126Z,1505242649.126 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/BIT.cfg
2017-09-12T18:57:29.234Z,1505242649.234 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Navigation.cfg
2017-09-12T18:57:29.329Z,1505242649.329 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Control.cfg
2017-09-12T18:57:29.444Z,1505242649.444 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Simulator.cfg
2017-09-12T18:57:29.534Z,1505242649.534 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Science.cfg
2017-09-12T18:57:29.762Z,1505242649.762 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Sensor.cfg
2017-09-12T18:57:29.938Z,1505242649.938 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/Servo.cfg
2017-09-12T18:57:30.040Z,1505242650.040 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/logger.cfg
2017-09-12T18:57:30.137Z,1505242650.137 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/secure.cfg
2017-09-12T18:57:30.225Z,1505242650.225 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/vehicle.cfg
2017-09-12T18:57:30.423Z,1505242650.423 [Supervisor](INFO): Opening Config file at: Config/lrauv-daphne/workSite.cfg
2017-09-12T18:57:30.515Z,1505242650.515 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2017-09-12T18:57:30.523Z,1505242650.523 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-09-12T18:57:30.690Z,1505242650.690 [SBIT](DEBUG): Construct Startup Built In Test.
2017-09-12T18:57:30.727Z,1505242650.727 [SBIT] Loaded
2017-09-12T18:57:30.727Z,1505242650.727 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-09-12T18:57:30.728Z,1505242650.728 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-09-12T18:57:30.763Z,1505242650.763 [IBIT] Loaded
2017-09-12T18:57:30.763Z,1505242650.763 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-09-12T18:57:30.768Z,1505242650.768 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-09-12T18:57:30.964Z,1505242650.964 [CBIT] Loaded
2017-09-12T18:57:30.964Z,1505242650.964 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-09-12T18:57:30.964Z,1505242650.964 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-09-12T18:57:30.965Z,1505242650.965 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-09-12T18:57:31.035Z,1505242651.035 [VerticalControl](DEBUG): Construct VerticalControl.
2017-09-12T18:57:31.155Z,1505242651.155 [VerticalControl] Loaded
2017-09-12T18:57:31.155Z,1505242651.155 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-09-12T18:57:31.156Z,1505242651.156 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-09-12T18:57:31.234Z,1505242651.234 [HorizontalControl] Loaded
2017-09-12T18:57:31.234Z,1505242651.234 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-09-12T18:57:31.235Z,1505242651.235 [SpeedControl](DEBUG): Construct SpeedControl.
2017-09-12T18:57:31.242Z,1505242651.242 [SpeedControl] Loaded
2017-09-12T18:57:31.242Z,1505242651.242 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-09-12T18:57:31.243Z,1505242651.243 [LoopControl](DEBUG): Construct LoopControl.
2017-09-12T18:57:31.244Z,1505242651.244 [LoopControl] Loaded
2017-09-12T18:57:31.244Z,1505242651.244 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-09-12T18:57:31.245Z,1505242651.245 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-09-12T18:57:31.245Z,1505242651.245 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-09-12T18:57:31.271Z,1505242651.271 [DepthRateCalculator] Loaded
2017-09-12T18:57:31.271Z,1505242651.271 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-09-12T18:57:31.278Z,1505242651.278 [PitchRateCalculator] Loaded
2017-09-12T18:57:31.278Z,1505242651.278 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-09-12T18:57:31.297Z,1505242651.297 [SpeedCalculator] Loaded
2017-09-12T18:57:31.297Z,1505242651.297 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-09-12T18:57:31.323Z,1505242651.323 [TempGradientCalculator] Loaded
2017-09-12T18:57:31.324Z,1505242651.324 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-09-12T18:57:31.342Z,1505242651.342 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-09-12T18:57:31.343Z,1505242651.343 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-09-12T18:57:31.349Z,1505242651.349 [YawRateCalculator] Loaded
2017-09-12T18:57:31.349Z,1505242651.349 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-09-12T18:57:31.350Z,1505242651.350 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-09-12T18:57:31.350Z,1505242651.350 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-09-12T18:57:31.436Z,1505242651.436 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-09-12T18:57:31.436Z,1505242651.436 [StratificationFrontDetector](DEBUG): (re)initializing
2017-09-12T18:57:31.436Z,1505242651.436 [StratificationFrontDetector] Loaded
2017-09-12T18:57:31.437Z,1505242651.437 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-09-12T18:57:31.437Z,1505242651.437 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-09-12T18:57:31.438Z,1505242651.438 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-09-12T18:57:31.667Z,1505242651.667 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-09-12T18:57:31.667Z,1505242651.667 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-09-12T18:57:31.781Z,1505242651.781 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-09-12T18:57:31.781Z,1505242651.781 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-09-12T18:57:31.849Z,1505242651.849 [DeadReckonUsingSpeedCalculator] Loaded
2017-09-12T18:57:31.850Z,1505242651.850 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-09-12T18:57:31.901Z,1505242651.901 [NavChart] Loaded
2017-09-12T18:57:31.901Z,1505242651.901 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-09-12T18:57:31.906Z,1505242651.906 [UniversalFixResidualReporter] Loaded
2017-09-12T18:57:31.907Z,1505242651.907 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-09-12T18:57:31.907Z,1505242651.907 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-09-12T18:57:31.908Z,1505242651.908 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-09-12T18:57:31.955Z,1505242651.955 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-09-12T18:57:31.955Z,1505242651.955 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-09-12T18:57:32.173Z,1505242652.173 [Aanderaa_O2] Loaded
2017-09-12T18:57:32.173Z,1505242652.173 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-09-12T18:57:32.192Z,1505242652.192 [PAR_Licor] Loaded
2017-09-12T18:57:32.193Z,1505242652.193 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-09-12T18:57:32.194Z,1505242652.194 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-09-12T18:57:32.194Z,1505242652.194 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-09-12T18:57:32.479Z,1505242652.479 [DataOverHttps] Loaded
2017-09-12T18:57:32.480Z,1505242652.480 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-09-12T18:57:32.497Z,1505242652.497 [Depth_Keller] Loaded
2017-09-12T18:57:32.497Z,1505242652.497 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-09-12T18:57:32.503Z,1505242652.503 [DropWeight] Loaded
2017-09-12T18:57:32.504Z,1505242652.504 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-09-12T18:57:32.702Z,1505242652.702 [NAL9602] Loaded
2017-09-12T18:57:32.702Z,1505242652.702 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-09-12T18:57:32.714Z,1505242652.714 [Onboard] Loaded
2017-09-12T18:57:32.714Z,1505242652.714 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-09-12T18:57:32.723Z,1505242652.723 [Radio_Surface] Loaded
2017-09-12T18:57:32.723Z,1505242652.723 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-09-12T18:57:32.725Z,1505242652.725 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 40A674E0
2017-09-12T18:57:32.725Z,1505242652.725 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 5198
2017-09-12T18:57:32.896Z,1505242652.896 [DAT] Loaded
2017-09-12T18:57:32.897Z,1505242652.897 [ComponentRegistry](DEBUG): SyncComponent "DAT" handled in the control thread.
2017-09-12T18:57:32.955Z,1505242652.955 [PNI_TCM] Loaded
2017-09-12T18:57:32.955Z,1505242652.955 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-09-12T18:57:35.424Z,1505242655.424 [BPC1] Loaded
2017-09-12T18:57:35.424Z,1505242655.424 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-09-12T18:57:35.424Z,1505242655.424 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-09-12T18:57:35.425Z,1505242655.425 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-09-12T18:57:35.547Z,1505242655.547 [BuoyancyServo] Loaded
2017-09-12T18:57:35.547Z,1505242655.547 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-09-12T18:57:35.562Z,1505242655.562 [ElevatorServo] Loaded
2017-09-12T18:57:35.562Z,1505242655.562 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-09-12T18:57:35.577Z,1505242655.577 [MassServo] Loaded
2017-09-12T18:57:35.577Z,1505242655.577 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-09-12T18:57:35.592Z,1505242655.592 [RudderServo] Loaded
2017-09-12T18:57:35.592Z,1505242655.592 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-09-12T18:57:35.606Z,1505242655.606 [ThrusterServo] Loaded
2017-09-12T18:57:35.607Z,1505242655.607 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-09-12T18:57:35.607Z,1505242655.607 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-09-12T18:57:35.608Z,1505242655.608 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-09-12T18:57:35.705Z,1505242655.705 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-09-12T18:57:35.706Z,1505242655.706 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-09-12T18:57:35.731Z,1505242655.731 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-09-12T18:57:35.737Z,1505242655.737 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-09-12T18:57:35.738Z,1505242655.738 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-09-12T18:57:35.748Z,1505242655.748 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-09-12T18:57:35.750Z,1505242655.750 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40B3B4E0
2017-09-12T18:57:35.750Z,1505242655.750 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 5199
2017-09-12T18:57:35.757Z,1505242655.757 [Supervisor](INFO): Main Thread ID is 5111
2017-09-12T18:57:35.757Z,1505242655.757 [Supervisor](DEBUG): Running supervisor.
2017-09-12T18:57:35.758Z,1505242655.758 [CommandLine ThreadHandler](INFO): Handler Thread ID is 5200
2017-09-12T18:57:35.762Z,1505242655.762 [controlThread ThreadHandler](INFO): Handler Thread ID is 5201
2017-09-12T18:57:35.762Z,1505242655.762 [controlThread](DEBUG): Initializing ControlThread
2017-09-12T18:57:35.763Z,1505242655.763 [SBIT](INFO): Initialize SBIT Component.
2017-09-12T18:57:35.764Z,1505242655.764 [SBIT](IMPORTANT): git: 2017-08-02-103-g54acef0
2017-09-12T18:57:35.764Z,1505242655.764 [SBIT](INFO): git hash: 54acef0e8867e4ebce852e89742b80c54cea63d9
2017-09-12T18:57:35.766Z,1505242655.766 [SBIT](INFO): Kernel Reporting Different Release From Configuration.
Kernel Expected: 2.6.27.8
Kernel Reported: 2.6.27.8-00011-g2bc81df-dirty
2017-09-12T18:57:35.766Z,1505242655.766 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #646 PREEMPT Thu Feb 11 17:01:12 PST 2016
2017-09-12T18:57:35.768Z,1505242655.768 [SBIT](INFO): Beginning SBIT in 71.000000 seconds.
2017-09-12T18:57:35.768Z,1505242655.768 [IBIT](INFO): Initialize IBIT Component.
2017-09-12T18:57:35.769Z,1505242655.769 [CBIT](DEBUG): Initialize CBIT Component.
2017-09-12T18:57:35.770Z,1505242655.770 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-09-12T18:57:35.771Z,1505242655.771 [logger ThreadHandler](INFO): Handler Thread ID is 5202
2017-09-12T18:57:35.799Z,1505242655.799 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 5203
2017-09-12T18:57:35.806Z,1505242655.806 [Radio_Surface](INFO): Powering up
2017-09-12T18:57:35.815Z,1505242655.815 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 5204
2017-09-12T18:57:35.819Z,1505242655.819 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-09-12T18:57:35.819Z,1505242655.819 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-09-12T18:57:35.820Z,1505242655.820 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-09-12T18:57:35.820Z,1505242655.820 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-09-12T18:57:35.820Z,1505242655.820 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-09-12T18:57:35.820Z,1505242655.820 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-09-12T18:57:35.820Z,1505242655.820 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-09-12T18:57:35.821Z,1505242655.821 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-09-12T18:57:35.821Z,1505242655.821 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-09-12T18:57:35.821Z,1505242655.821 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-09-12T18:57:35.821Z,1505242655.821 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-09-12T18:57:35.821Z,1505242655.821 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-09-12T18:57:35.822Z,1505242655.822 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-09-12T18:57:35.822Z,1505242655.822 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-09-12T18:57:35.822Z,1505242655.822 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-09-12T18:57:35.823Z,1505242655.823 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-09-12T18:57:35.851Z,1505242655.851 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-09-12T18:57:35.853Z,1505242655.853 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-09-12T18:57:35.853Z,1505242655.853 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-09-12T18:57:35.854Z,1505242655.854 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-09-12T18:57:35.854Z,1505242655.854 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-09-12T18:57:35.855Z,1505242655.855 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-09-12T18:57:35.855Z,1505242655.855 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-09-12T18:57:35.855Z,1505242655.855 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-09-12T18:57:35.856Z,1505242655.856 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-09-12T18:57:35.857Z,1505242655.857 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-09-12T18:57:35.858Z,1505242655.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-09-12T18:57:35.859Z,1505242655.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-09-12T18:57:35.859Z,1505242655.859 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-09-12T18:57:35.860Z,1505242655.860 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-09-12T18:57:35.860Z,1505242655.860 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-09-12T18:57:35.861Z,1505242655.861 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-09-12T18:57:35.861Z,1505242655.861 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-09-12T18:57:35.861Z,1505242655.861 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-09-12T18:57:35.881Z,1505242655.881 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-09-12T18:57:35.910Z,1505242655.910 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-09-12T18:57:35.952Z,1505242655.952 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-09-12T18:57:35.955Z,1505242655.955 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-09-12T18:57:36.031Z,1505242656.031 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-09-12T18:57:36.032Z,1505242656.032 [Default:A.Wait](DEBUG): Construct Wait.
2017-09-12T18:57:36.034Z,1505242656.034 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-09-12T18:57:36.094Z,1505242656.094 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-09-12T18:57:36.113Z,1505242656.113 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-09-12T18:57:36.141Z,1505242656.141 [Default:E.Execute](DEBUG): Construct Execute.
2017-09-12T18:57:36.145Z,1505242656.145 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-09-12T18:57:36.156Z,1505242656.156 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,DAT,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-09-12T18:57:36.332Z,1505242656.332 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-09-12T18:57:36.380Z,1505242656.380 [Depth_Keller](ERROR): Pressure reading out of range: 1831.023193 decibar
2017-09-12T18:57:36.447Z,1505242656.447 [DAT](INFO): Powering up
2017-09-12T18:57:36.447Z,1505242656.447 [DAT](DEBUG): Initializing DAT.
2017-09-12T18:57:36.625Z,1505242656.625 [DepthRateCalculator](ERROR): Depth measurement is not active
2017-09-12T18:57:36.724Z,1505242656.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:36.751Z,1505242656.751 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:36.921Z,1505242656.921 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-09-12T18:57:36.929Z,1505242656.929 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-09-12T18:57:36.948Z,1505242656.948 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-09-12T18:57:36.952Z,1505242656.952 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-09-12T18:57:36.980Z,1505242656.980 [MassServo](DEBUG): Initializing EZServoServo.
2017-09-12T18:57:36.989Z,1505242656.989 [MassServo](DEBUG): Initializing MassServo.
2017-09-12T18:57:37.003Z,1505242657.003 [RudderServo](DEBUG): Initializing EZServoServo.
2017-09-12T18:57:37.012Z,1505242657.012 [RudderServo](DEBUG): Initializing RudderServo.
2017-09-12T18:57:37.027Z,1505242657.027 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-09-12T18:57:37.033Z,1505242657.033 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-09-12T18:57:37.396Z,1505242657.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:37.397Z,1505242657.397 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:37.630Z,1505242657.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:37.631Z,1505242657.631 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:38.024Z,1505242658.024 [NAL9602](INFO): Powering up NAL9602
2017-09-12T18:57:38.071Z,1505242658.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:38.072Z,1505242658.072 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:38.483Z,1505242658.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:38.484Z,1505242658.484 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:38.850Z,1505242658.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:38.851Z,1505242658.851 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:39.324Z,1505242659.324 [Aanderaa_O2](INFO): Powering down
2017-09-12T18:57:39.438Z,1505242659.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:39.439Z,1505242659.439 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:39.662Z,1505242659.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:39.664Z,1505242659.664 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-09-12T18:57:48.917Z,1505242668.917 [NAL9602](INFO): NAL9602 initialized
2017-09-12T18:58:26.151Z,1505242706.151 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 04:51:33 
Warning battery low
CONNECT
2017-09-12T18:58:26.151Z,1505242706.151 [DAT](INFO): Got CONNECT
2017-09-12T18:58:26.151Z,1505242706.151 [DAT](INFO): entering command mode
2017-09-12T18:58:26.538Z,1505242706.538 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T18:58:26.934Z,1505242706.934 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T18:58:27.348Z,1505242707.348 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T18:58:27.750Z,1505242707.750 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T18:58:27.750Z,1505242707.750 [DAT](DEBUG): Found user prompt
2017-09-12T18:58:27.750Z,1505242707.750 [DAT](INFO): command mode acknowledged
2017-09-12T18:58:28.158Z,1505242708.158 [DAT](INFO): setting local address to 2
2017-09-12T18:58:28.554Z,1505242708.554 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T18:58:28.555Z,1505242708.555 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T18:58:28.555Z,1505242708.555 [DAT] Communications Fault, FailCount= 1
2017-09-12T18:58:28.556Z,1505242708.556 [DAT](ERROR): Communications Fault
2017-09-12T18:58:28.677Z,1505242708.677 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T18:58:28.933Z,1505242708.933 [DAT](INFO): Powering down
2017-09-12T18:58:29.837Z,1505242709.837 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T18:58:29.837Z,1505242709.837 [DAT] No Fault, FailCount= 1
2017-09-12T18:58:32.142Z,1505242712.142 [DAT](INFO): Powering up
2017-09-12T18:58:32.142Z,1505242712.142 [DAT](DEBUG): Initializing DAT.
2017-09-12T18:58:47.417Z,1505242727.417 [SBIT](IMPORTANT): Beginning Startup BIT
2017-09-12T18:58:47.430Z,1505242727.430 [CBIT](IMPORTANT): Beginning ground fault scan
2017-09-12T18:58:51.547Z,1505242731.547 [BPC1](ERROR): Failed to receive battery data
2017-09-12T18:58:51.547Z,1505242731.547 [BPC1] Communications Fault, FailCount= 1
2017-09-12T18:58:51.547Z,1505242731.547 [BPC1](ERROR): Communications Fault
2017-09-12T18:58:51.696Z,1505242731.696 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T18:58:52.847Z,1505242732.847 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T18:58:52.847Z,1505242732.847 [BPC1] No Fault, FailCount= 1
2017-09-12T18:58:58.038Z,1505242738.038 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 4.657929
CHAN A1 (24V): 0.027744
CHAN A2 (12V): 4.697929
CHAN A3 (5V): -0.011624
CHAN B0 (3.3V): -0.000292
CHAN B1 (3.15aV): 0.000225
CHAN B2 (3.15bV): -0.000029
CHAN B3 (GND): 0.000174
OPEN: -0.000288
Full Scale Calc: 4.765 mA, -1.589 mA
2017-09-12T18:59:21.362Z,1505242761.362 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 04:52:28 
Warning battery low
CONNECT
2017-09-12T18:59:21.363Z,1505242761.363 [DAT](INFO): Got CONNECT
2017-09-12T18:59:21.363Z,1505242761.363 [DAT](INFO): entering command mode
2017-09-12T18:59:21.767Z,1505242761.767 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T18:59:22.164Z,1505242762.164 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T18:59:22.562Z,1505242762.562 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T18:59:22.974Z,1505242762.974 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T18:59:22.974Z,1505242762.974 [DAT](DEBUG): Found user prompt
2017-09-12T18:59:22.975Z,1505242762.974 [DAT](INFO): command mode acknowledged
2017-09-12T18:59:23.367Z,1505242763.367 [DAT](INFO): setting local address to 2
2017-09-12T18:59:23.776Z,1505242763.776 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T18:59:23.777Z,1505242763.777 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T18:59:23.777Z,1505242763.777 [DAT] Communications Fault, FailCount= 2
2017-09-12T18:59:23.777Z,1505242763.777 [DAT](ERROR): Communications Fault
2017-09-12T18:59:23.848Z,1505242763.848 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T18:59:24.185Z,1505242764.185 [DAT](INFO): Powering down
2017-09-12T18:59:25.058Z,1505242765.058 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T18:59:25.058Z,1505242765.058 [DAT] No Fault, FailCount= 2
2017-09-12T18:59:27.365Z,1505242767.365 [DAT](INFO): Powering up
2017-09-12T18:59:27.365Z,1505242767.365 [DAT](DEBUG): Initializing DAT.
2017-09-12T18:59:41.343Z,1505242781.343 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003907
2017-09-12T18:59:41.429Z,1505242781.429 [SBIT](IMPORTANT): SBIT PASSED
2017-09-12T18:59:41.850Z,1505242781.850 [MissionManager](IMPORTANT): Started mission Startup
2017-09-12T18:59:41.850Z,1505242781.850 [Startup] Running Loop=1
2017-09-12T18:59:41.850Z,1505242781.850 [Startup](DEBUG): Aggregate::initialize Startup
2017-09-12T18:59:41.851Z,1505242781.851 [Startup:A.GoToSurface] Running Loop=1
2017-09-12T18:59:41.851Z,1505242781.851 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-09-12T18:59:41.851Z,1505242781.851 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-09-12T18:59:41.852Z,1505242781.852 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-09-12T18:59:41.852Z,1505242781.852 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-09-12T18:59:41.852Z,1505242781.852 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-09-12T18:59:41.853Z,1505242781.853 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-09-12T18:59:41.885Z,1505242781.885 [Startup:StartupSatComms] Running Loop=1
2017-09-12T18:59:41.885Z,1505242781.885 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-09-12T18:59:41.885Z,1505242781.885 [Startup:StartupSatComms:A] Running Loop=1
2017-09-12T18:59:42.224Z,1505242782.224 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-09-12T19:00:03.806Z,1505242803.806 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:00:03.806Z,1505242803.806 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:00:03.806Z,1505242803.806 [BPC1](ERROR): Communications Fault
2017-09-12T19:00:03.869Z,1505242803.869 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:00:05.024Z,1505242805.024 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:00:05.024Z,1505242805.024 [BPC1] No Fault, FailCount= 1
2017-09-12T19:00:16.595Z,1505242816.595 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 04:53:24 
Warning battery low
CONNECT
2017-09-12T19:00:16.595Z,1505242816.595 [DAT](INFO): Got CONNECT
2017-09-12T19:00:16.596Z,1505242816.596 [DAT](INFO): entering command mode
2017-09-12T19:00:16.972Z,1505242816.972 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:00:17.373Z,1505242817.373 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:00:17.768Z,1505242817.768 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:00:18.174Z,1505242818.174 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:00:18.174Z,1505242818.174 [DAT](DEBUG): Found user prompt
2017-09-12T19:00:18.174Z,1505242818.174 [DAT](INFO): command mode acknowledged
2017-09-12T19:00:18.579Z,1505242818.579 [DAT](INFO): setting local address to 2
2017-09-12T19:00:18.981Z,1505242818.981 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:00:18.982Z,1505242818.982 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:00:18.982Z,1505242818.982 [DAT] Communications Fault, FailCount= 3
2017-09-12T19:00:18.982Z,1505242818.982 [DAT](ERROR): Communications Fault
2017-09-12T19:00:19.061Z,1505242819.061 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:00:19.360Z,1505242819.360 [DAT](INFO): Powering down
2017-09-12T19:00:20.263Z,1505242820.263 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:00:20.263Z,1505242820.263 [DAT] No Fault, FailCount= 3
2017-09-12T19:00:22.564Z,1505242822.564 [DAT](INFO): Powering up
2017-09-12T19:00:22.564Z,1505242822.564 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:00:36.219Z,1505242836.219 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-09-12T19:00:36.219Z,1505242836.219 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-09-12T19:00:36.219Z,1505242836.219 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-09-12T19:00:36.221Z,1505242836.221 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-09-12T19:00:36.222Z,1505242836.222 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-09-12T19:00:36.222Z,1505242836.222 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-09-12T19:00:36.272Z,1505242836.272 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-09-12T19:00:36.272Z,1505242836.272 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-09-12T19:00:36.627Z,1505242836.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-09-12T19:00:36.627Z,1505242836.627 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-09-12T19:00:36.627Z,1505242836.627 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-09-12T19:00:36.627Z,1505242836.627 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-09-12T19:00:36.984Z,1505242836.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-09-12T19:00:36.984Z,1505242836.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-09-12T19:00:36.985Z,1505242836.985 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-09-12T19:00:36.985Z,1505242836.985 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-09-12T19:00:36.986Z,1505242836.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-09-12T19:00:36.986Z,1505242836.986 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-09-12T19:00:37.393Z,1505242837.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-09-12T19:00:40.653Z,1505242840.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-09-12T19:00:40.836Z,1505242840.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.6 s old, using for 20.0 s.
2017-09-12T19:00:41.189Z,1505242841.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.0 s old, using for 20.0 s.
2017-09-12T19:00:41.594Z,1505242841.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.4 s old, using for 20.0 s.
2017-09-12T19:00:41.978Z,1505242841.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.8 s old, using for 20.0 s.
2017-09-12T19:00:41.986Z,1505242841.986 [Startup:StartupSatComms:A](INFO): Timed out from 2017-09-12T18:59:41.9Z
2017-09-12T19:00:41.986Z,1505242841.986 [Startup:StartupSatComms:A] Stopped
2017-09-12T19:00:41.986Z,1505242841.986 [Startup:StartupSatComms:B] Running Loop=1
2017-09-12T19:00:42.382Z,1505242842.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-09-12T19:00:42.390Z,1505242842.390 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-09-12T19:00:43.029Z,1505242843.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-09-12T19:00:43.183Z,1505242843.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.0 s old, using for 20.0 s.
2017-09-12T19:00:46.523Z,1505242846.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.3 s old, using for 20.0 s.
2017-09-12T19:00:46.601Z,1505242846.601 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20170912T182609/Courier0016.lzma
2017-09-12T19:00:46.667Z,1505242846.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-09-12T19:00:47.020Z,1505242847.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-09-12T19:00:47.372Z,1505242847.372 [DataOverHttps](INFO): Moved sent file to Logs/20170912T182609/Courier0016.lzma.bak
2017-09-12T19:00:47.372Z,1505242847.372 [DataOverHttps](INFO): SBD MOMSN=5086288
2017-09-12T19:00:47.481Z,1505242847.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.3 s old, using for 20.0 s.
2017-09-12T19:00:48.169Z,1505242848.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-09-12T19:00:48.352Z,1505242848.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.1 s old, using for 20.0 s.
2017-09-12T19:00:51.567Z,1505242851.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.3 s old, using for 20.0 s.
2017-09-12T19:00:51.715Z,1505242851.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.5 s old, using for 20.0 s.
2017-09-12T19:00:52.074Z,1505242852.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.9 s old, using for 20.0 s.
2017-09-12T19:00:52.489Z,1505242852.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.3 s old, using for 20.0 s.
2017-09-12T19:00:52.849Z,1505242852.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-09-12T19:00:53.258Z,1505242853.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-09-12T19:00:56.600Z,1505242856.600 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20170912T182609/Express0017.lzma
2017-09-12T19:00:57.379Z,1505242857.379 [DataOverHttps](INFO): Moved sent file to Logs/20170912T182609/Express0017.lzma.bak
2017-09-12T19:00:57.380Z,1505242857.380 [DataOverHttps](INFO): SBD MOMSN=5086290
2017-09-12T19:01:06.613Z,1505242866.613 [DataOverHttps](INFO): Sending 515 bytes from file Logs/20170912T185724/Express0001.lzma
2017-09-12T19:01:07.375Z,1505242867.375 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0001.lzma.bak
2017-09-12T19:01:07.375Z,1505242867.375 [DataOverHttps](INFO): SBD MOMSN=5086292
2017-09-12T19:01:08.208Z,1505242868.208 [Startup:StartupSatComms:B] Stopped
2017-09-12T19:01:08.208Z,1505242868.208 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-09-12T19:01:08.208Z,1505242868.208 [Startup:StartupSatComms] Stopped
2017-09-12T19:01:08.208Z,1505242868.208 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-09-12T19:01:08.209Z,1505242868.209 [Startup](INFO): Completed Startup
2017-09-12T19:01:08.210Z,1505242868.210 [MissionManager](INFO): Startup is completed.
2017-09-12T19:01:08.210Z,1505242868.210 [MissionManager](INFO): Uninitializing Mission Startup
2017-09-12T19:01:08.210Z,1505242868.210 [Startup] Stopped
2017-09-12T19:01:08.210Z,1505242868.210 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-09-12T19:01:08.210Z,1505242868.210 [Startup:A.GoToSurface] Stopped
2017-09-12T19:01:08.210Z,1505242868.210 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-09-12T19:01:08.380Z,1505242868.380 [MissionManager](IMPORTANT): Started mission Default
2017-09-12T19:01:08.380Z,1505242868.380 [Default] Running Loop=1
2017-09-12T19:01:08.380Z,1505242868.380 [Default](DEBUG): Aggregate::initialize Default
2017-09-12T19:01:08.380Z,1505242868.380 [Default:B.GoToSurface] Running Loop=1
2017-09-12T19:01:08.381Z,1505242868.381 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-09-12T19:01:08.381Z,1505242868.381 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-09-12T19:01:08.382Z,1505242868.382 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-09-12T19:01:08.382Z,1505242868.382 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-09-12T19:01:08.387Z,1505242868.387 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-09-12T19:01:08.387Z,1505242868.387 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-09-12T19:01:08.387Z,1505242868.387 [Default:A.Wait] Running Loop=1
2017-09-12T19:01:08.387Z,1505242868.387 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-09-12T19:01:12.092Z,1505242872.092 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 04:54:19 
Warning battery low
CONNECT
2017-09-12T19:01:12.092Z,1505242872.092 [DAT](INFO): Got CONNECT
2017-09-12T19:01:12.093Z,1505242872.093 [DAT](INFO): entering command mode
2017-09-12T19:01:12.472Z,1505242872.472 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:01:12.867Z,1505242872.867 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:01:13.315Z,1505242873.315 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:01:13.315Z,1505242873.315 [DAT](DEBUG): Found user prompt
2017-09-12T19:01:13.316Z,1505242873.316 [DAT](INFO): command mode acknowledged
2017-09-12T19:01:13.669Z,1505242873.669 [DAT](INFO): setting local address to 2
2017-09-12T19:01:14.077Z,1505242874.077 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:01:14.078Z,1505242874.078 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:01:14.079Z,1505242874.079 [DAT] Communications Fault, FailCount= 4
2017-09-12T19:01:14.079Z,1505242874.079 [DAT](ERROR): Communications Fault
2017-09-12T19:01:14.170Z,1505242874.170 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:01:14.484Z,1505242874.484 [DAT](INFO): Powering down
2017-09-12T19:01:15.346Z,1505242875.346 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:01:15.346Z,1505242875.346 [DAT] No Fault, FailCount= 4
2017-09-12T19:01:17.694Z,1505242877.694 [DAT](INFO): Powering up
2017-09-12T19:01:17.694Z,1505242877.694 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:01:21.711Z,1505242881.711 [Default:A.Wait](INFO): Done Waiting.
2017-09-12T19:01:21.712Z,1505242881.712 [Default:A.Wait] Stopped
2017-09-12T19:01:21.712Z,1505242881.712 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T19:01:22.129Z,1505242882.129 [Default:CheckIn] Running Loop=1
2017-09-12T19:01:22.130Z,1505242882.130 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T19:01:22.130Z,1505242882.130 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T19:01:22.501Z,1505242882.501 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-09-12T19:02:07.267Z,1505242927.267 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 04:55:14 
Warning battery low
CONNECT
2017-09-12T19:02:07.267Z,1505242927.267 [DAT](INFO): Got CONNECT
2017-09-12T19:02:07.268Z,1505242927.268 [DAT](INFO): entering command mode
2017-09-12T19:02:07.670Z,1505242927.670 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:02:08.067Z,1505242928.067 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:02:08.469Z,1505242928.469 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:02:08.469Z,1505242928.469 [DAT](DEBUG): Found user prompt
2017-09-12T19:02:08.469Z,1505242928.469 [DAT](INFO): command mode acknowledged
2017-09-12T19:02:08.873Z,1505242928.873 [DAT](INFO): setting local address to 2
2017-09-12T19:02:12.170Z,1505242932.170 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:02:12.171Z,1505242932.171 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:02:12.171Z,1505242932.171 [DAT] Communications Fault, FailCount= 5
2017-09-12T19:02:12.171Z,1505242932.171 [DAT](ERROR): Communications Fault
2017-09-12T19:02:12.247Z,1505242932.247 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:02:12.299Z,1505242932.299 [DAT](INFO): Powering down
2017-09-12T19:02:13.161Z,1505242933.161 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:02:13.161Z,1505242933.161 [DAT] No Fault, FailCount= 5
2017-09-12T19:02:15.490Z,1505242935.490 [DAT](INFO): Powering up
2017-09-12T19:02:15.490Z,1505242935.490 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:02:29.073Z,1505242949.073 [NAL9602](INFO): SBD MO Status=2, MOMSN=478, MT Status=2, MTMSN=0
2017-09-12T19:02:29.073Z,1505242949.073 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:02:34.318Z,1505242954.318 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:02:34.318Z,1505242954.318 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:02:34.318Z,1505242954.318 [BPC1](ERROR): Data Fault
2017-09-12T19:02:34.391Z,1505242954.391 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:02:35.579Z,1505242955.579 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:02:35.579Z,1505242955.579 [BPC1] No Fault, FailCount= 1
2017-09-12T19:02:52.270Z,1505242972.270 [NAL9602](INFO): SBD MO Status=2, MOMSN=478, MT Status=2, MTMSN=0
2017-09-12T19:02:52.271Z,1505242972.271 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:02:52.677Z,1505242972.677 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-12T19:02:53.877Z,1505242973.877 [NAL9602](INFO): GPS fix at 20170912T190041: (36.802734, -121.787981)
2017-09-12T19:02:53.950Z,1505242973.950 [Default:CheckIn:Read_GPS] Stopped
2017-09-12T19:02:53.951Z,1505242973.951 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-12T19:02:54.370Z,1505242974.370 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-09-12T19:02:59.559Z,1505242979.559 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20170912T185724/Courier0004.lzma
2017-09-12T19:03:00.334Z,1505242980.334 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Courier0004.lzma.bak
2017-09-12T19:03:00.334Z,1505242980.334 [DataOverHttps](INFO): SBD MOMSN=5086302
2017-09-12T19:03:06.151Z,1505242986.151 [NAL9602](INFO): Powering down
2017-09-12T19:03:06.208Z,1505242986.208 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 04:56:12 
Warning battery low
CONNECT
2017-09-12T19:03:06.208Z,1505242986.208 [DAT](INFO): Got CONNECT
2017-09-12T19:03:06.208Z,1505242986.208 [DAT](INFO): entering command mode
2017-09-12T19:03:06.435Z,1505242986.435 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:03:06.435Z,1505242986.435 [DAT](DEBUG): Found user prompt
2017-09-12T19:03:06.436Z,1505242986.436 [DAT](INFO): command mode acknowledged
2017-09-12T19:03:06.830Z,1505242986.830 [DAT](INFO): setting local address to 2
2017-09-12T19:03:07.231Z,1505242987.231 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:03:07.232Z,1505242987.232 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:03:07.232Z,1505242987.232 [DAT] Communications Fault, FailCount= 6
2017-09-12T19:03:07.232Z,1505242987.232 [DAT](ERROR): Communications Fault
2017-09-12T19:03:07.362Z,1505242987.362 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:03:07.621Z,1505242987.621 [DAT](INFO): Powering down
2017-09-12T19:03:11.686Z,1505242991.686 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:03:11.686Z,1505242991.686 [DAT] No Fault, FailCount= 6
2017-09-12T19:03:11.772Z,1505242991.772 [DataOverHttps](INFO): Sending 299 bytes from file Logs/20170912T185724/Express0005.lzma
2017-09-12T19:03:11.794Z,1505242991.794 [DAT](INFO): Powering up
2017-09-12T19:03:11.795Z,1505242991.795 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:03:12.529Z,1505242992.529 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0005.lzma.bak
2017-09-12T19:03:12.530Z,1505242992.530 [DataOverHttps](INFO): SBD MOMSN=5086305
2017-09-12T19:03:13.257Z,1505242993.257 [Default:CheckIn:Read_Iridium] Stopped
2017-09-12T19:03:13.257Z,1505242993.257 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-12T19:03:13.257Z,1505242993.257 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-12T19:04:01.152Z,1505243041.152 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 04:57:08 
Warning battery low
CONNECT
2017-09-12T19:04:01.152Z,1505243041.152 [DAT](INFO): Got CONNECT
2017-09-12T19:04:01.153Z,1505243041.153 [DAT](INFO): entering command mode
2017-09-12T19:04:01.558Z,1505243041.558 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:04:01.946Z,1505243041.946 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:04:02.347Z,1505243042.347 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:04:02.769Z,1505243042.769 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:04:02.769Z,1505243042.769 [DAT](DEBUG): Found user prompt
2017-09-12T19:04:02.769Z,1505243042.769 [DAT](INFO): command mode acknowledged
2017-09-12T19:04:03.144Z,1505243043.144 [DAT](INFO): setting local address to 2
2017-09-12T19:04:03.545Z,1505243043.545 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:04:03.546Z,1505243043.546 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:04:03.546Z,1505243043.546 [DAT] Communications Fault, FailCount= 7
2017-09-12T19:04:03.546Z,1505243043.546 [DAT](ERROR): Communications Fault
2017-09-12T19:04:03.643Z,1505243043.643 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:04:03.960Z,1505243043.960 [DAT](INFO): Powering down
2017-09-12T19:04:04.834Z,1505243044.834 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:04:04.834Z,1505243044.834 [DAT] No Fault, FailCount= 7
2017-09-12T19:04:07.151Z,1505243047.151 [DAT](INFO): Powering up
2017-09-12T19:04:07.152Z,1505243047.152 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:04:56.726Z,1505243096.726 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 04:58:03 
Warning battery low
CONNECT
2017-09-12T19:04:56.726Z,1505243096.726 [DAT](INFO): Got CONNECT
2017-09-12T19:04:56.727Z,1505243096.727 [DAT](INFO): entering command mode
2017-09-12T19:04:57.118Z,1505243097.118 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:04:57.516Z,1505243097.516 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:04:57.912Z,1505243097.912 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:04:57.912Z,1505243097.912 [DAT](DEBUG): Found user prompt
2017-09-12T19:04:57.912Z,1505243097.912 [DAT](INFO): command mode acknowledged
2017-09-12T19:04:58.308Z,1505243098.308 [DAT](INFO): setting local address to 2
2017-09-12T19:04:58.709Z,1505243098.709 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:04:58.710Z,1505243098.710 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:04:58.710Z,1505243098.710 [DAT] Communications Fault, FailCount= 8
2017-09-12T19:04:58.710Z,1505243098.710 [DAT](ERROR): Communications Fault
2017-09-12T19:04:58.819Z,1505243098.819 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:04:58.819Z,1505243098.819 [CBIT](CRITICAL): Communications Fault in component: DAT
2017-09-12T19:04:59.109Z,1505243099.109 [DAT](INFO): Powering down
2017-09-12T19:04:59.265Z,1505243099.265 [CommandLine](FAULT): Scheduling is paused
2017-09-12T19:04:59.265Z,1505243099.265 [CBIT](INFO): Critical error at 20170912T190458
2017-09-12T19:04:59.265Z,1505243099.265 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-09-12T19:06:22.464Z,1505243182.464 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:06:22.464Z,1505243182.464 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:06:22.465Z,1505243182.465 [BPC1](ERROR): Communications Fault
2017-09-12T19:06:22.592Z,1505243182.592 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:06:23.543Z,1505243183.543 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:06:23.543Z,1505243183.543 [BPC1] No Fault, FailCount= 1
2017-09-12T19:06:57.454Z,1505243217.454 [PNI_TCM](ERROR): CRC does not match. Expected:0x55408 got:0x49049
2017-09-12T19:07:01.058Z,1505243221.058 [PNI_TCM](ERROR): CRC does not match. Expected:0x1330 got:0x23631
2017-09-12T19:07:24.957Z,1505243244.957 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:07:24.957Z,1505243244.957 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:07:24.957Z,1505243244.957 [BPC1](ERROR): Communications Fault
2017-09-12T19:07:25.085Z,1505243245.085 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:07:26.093Z,1505243246.093 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:07:26.093Z,1505243246.093 [BPC1] No Fault, FailCount= 1
2017-09-12T19:07:35.999Z,1505243255.999 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-12T19:07:51.965Z,1505243271.965 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-12T19:07:51.965Z,1505243271.965 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:07:51.965Z,1505243271.965 [BPC1](ERROR): Data Fault
2017-09-12T19:07:52.059Z,1505243272.059 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:07:53.190Z,1505243273.190 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:07:53.190Z,1505243273.190 [BPC1] No Fault, FailCount= 1
2017-09-12T19:08:13.580Z,1505243293.580 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-12T19:08:13.581Z,1505243293.581 [Default:CheckIn:C.Wait] Stopped
2017-09-12T19:08:13.581Z,1505243293.581 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T19:08:13.581Z,1505243293.581 [Default:CheckIn:D] Running Loop=1
2017-09-12T19:08:13.971Z,1505243293.971 [Default:CheckIn:D] Stopped
2017-09-12T19:08:13.971Z,1505243293.971 [Default:CheckIn:E] Running Loop=1
2017-09-12T19:08:14.379Z,1505243294.379 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 7.093139 min 
2017-09-12T19:08:14.386Z,1505243294.386 [Default:CheckIn:E] Stopped
2017-09-12T19:08:14.386Z,1505243294.386 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-12T19:08:14.386Z,1505243294.386 [Default:CheckIn] Stopped
2017-09-12T19:08:14.386Z,1505243294.386 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-12T19:08:14.387Z,1505243294.387 [Default:CheckIn](INFO): Running loop #2
2017-09-12T19:08:14.387Z,1505243294.387 [Default:CheckIn] Running Loop=2
2017-09-12T19:08:14.387Z,1505243294.387 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T19:08:14.387Z,1505243294.387 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T19:08:17.998Z,1505243297.998 [NAL9602](INFO): Powering up
2017-09-12T19:08:28.897Z,1505243308.897 [NAL9602](INFO): NAL9602 initialized
2017-09-12T19:08:59.290Z,1505243339.290 [NAL9602](INFO): SBD MO Status=2, MOMSN=478, MT Status=2, MTMSN=0
2017-09-12T19:08:59.290Z,1505243339.290 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:09:21.232Z,1505243361.232 [NAL9602](INFO): SBD MO Status=0, MOMSN=478, MT Status=0, MTMSN=0
2017-09-12T19:09:21.232Z,1505243361.232 [NAL9602](INFO): No messages in MT queue
2017-09-12T19:09:58.930Z,1505243398.930 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:09:58.931Z,1505243398.931 [DAT] No Fault, FailCount= 8
2017-09-12T19:09:59.240Z,1505243399.240 [DAT](INFO): Powering up
2017-09-12T19:09:59.240Z,1505243399.240 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:10:38.528Z,1505243438.528 [BPC1](ERROR): Failed to parse message.
2017-09-12T19:10:38.528Z,1505243438.528 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:10:38.529Z,1505243438.529 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:10:38.529Z,1505243438.529 [BPC1](ERROR): Data Fault
2017-09-12T19:10:38.607Z,1505243438.607 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:10:39.781Z,1505243439.781 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:10:39.781Z,1505243439.781 [BPC1] No Fault, FailCount= 1
2017-09-12T19:10:49.345Z,1505243449.345 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:03:56 
Warning battery low
CONNECT
2017-09-12T19:10:49.345Z,1505243449.345 [DAT](INFO): Got CONNECT
2017-09-12T19:10:49.345Z,1505243449.345 [DAT](INFO): entering command mode
2017-09-12T19:10:49.741Z,1505243449.741 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:10:50.121Z,1505243450.121 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:10:50.517Z,1505243450.517 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:10:50.910Z,1505243450.910 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:10:50.910Z,1505243450.910 [DAT](DEBUG): Found user prompt
2017-09-12T19:10:50.910Z,1505243450.910 [DAT](INFO): command mode acknowledged
2017-09-12T19:10:51.323Z,1505243451.323 [DAT](INFO): setting local address to 2
2017-09-12T19:10:51.719Z,1505243451.719 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:10:51.720Z,1505243451.720 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:10:51.721Z,1505243451.721 [DAT] Communications Fault, FailCount= 1
2017-09-12T19:10:51.721Z,1505243451.721 [DAT](ERROR): Communications Fault
2017-09-12T19:10:51.808Z,1505243451.808 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:10:52.129Z,1505243452.129 [DAT](INFO): Powering down
2017-09-12T19:10:53.007Z,1505243453.007 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:10:53.007Z,1505243453.007 [DAT] No Fault, FailCount= 1
2017-09-12T19:10:55.339Z,1505243455.339 [DAT](INFO): Powering up
2017-09-12T19:10:55.339Z,1505243455.339 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:11:19.075Z,1505243479.075 [NAL9602](INFO): GPS fix at 20170912T190906: (36.802668, -121.788089)
2017-09-12T19:11:19.145Z,1505243479.145 [Default:CheckIn:Read_GPS] Stopped
2017-09-12T19:11:19.145Z,1505243479.145 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-12T19:11:23.733Z,1505243483.733 [DataOverHttps](INFO): Sending 288 bytes from file Logs/20170912T185724/Courier0008.lzma
2017-09-12T19:11:24.531Z,1505243484.531 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Courier0008.lzma.bak
2017-09-12T19:11:24.531Z,1505243484.531 [DataOverHttps](INFO): SBD MOMSN=5086310
2017-09-12T19:11:28.666Z,1505243488.666 [NAL9602](INFO): Powering down
2017-09-12T19:11:33.811Z,1505243493.811 [DataOverHttps](INFO): Sending 192 bytes from file Logs/20170912T185724/Express0009.lzma
2017-09-12T19:11:34.602Z,1505243494.602 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0009.lzma.bak
2017-09-12T19:11:34.602Z,1505243494.602 [DataOverHttps](INFO): SBD MOMSN=5086314
2017-09-12T19:11:35.322Z,1505243495.322 [Default:CheckIn:Read_Iridium] Stopped
2017-09-12T19:11:35.322Z,1505243495.322 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-12T19:11:35.323Z,1505243495.323 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-12T19:11:39.957Z,1505243499.957 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-12T19:11:39.958Z,1505243499.958 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:11:39.958Z,1505243499.958 [BPC1](ERROR): Data Fault
2017-09-12T19:11:40.024Z,1505243500.024 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:11:41.218Z,1505243501.218 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:11:41.218Z,1505243501.218 [BPC1] No Fault, FailCount= 1
2017-09-12T19:11:44.743Z,1505243504.743 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:04:52 
Warning battery low
CONNECT
2017-09-12T19:11:44.743Z,1505243504.743 [DAT](INFO): Got CONNECT
2017-09-12T19:11:44.743Z,1505243504.743 [DAT](INFO): entering command mode
2017-09-12T19:11:45.135Z,1505243505.135 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:11:45.535Z,1505243505.535 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:11:45.935Z,1505243505.935 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:11:46.336Z,1505243506.336 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:11:46.336Z,1505243506.336 [DAT](DEBUG): Found user prompt
2017-09-12T19:11:46.336Z,1505243506.336 [DAT](INFO): command mode acknowledged
2017-09-12T19:11:46.754Z,1505243506.754 [DAT](INFO): setting local address to 2
2017-09-12T19:11:47.130Z,1505243507.130 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:11:47.131Z,1505243507.131 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:11:47.131Z,1505243507.131 [DAT] Communications Fault, FailCount= 2
2017-09-12T19:11:47.131Z,1505243507.131 [DAT](ERROR): Communications Fault
2017-09-12T19:11:47.241Z,1505243507.241 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:11:47.531Z,1505243507.531 [DAT](INFO): Powering down
2017-09-12T19:11:48.415Z,1505243508.415 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:11:48.415Z,1505243508.415 [DAT] No Fault, FailCount= 2
2017-09-12T19:11:50.746Z,1505243510.746 [DAT](INFO): Powering up
2017-09-12T19:11:50.747Z,1505243510.747 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:12:40.221Z,1505243560.221 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:05:47 
Warning battery low
CONNECT
2017-09-12T19:12:40.221Z,1505243560.221 [DAT](INFO): Got CONNECT
2017-09-12T19:12:40.221Z,1505243560.221 [DAT](INFO): entering command mode
2017-09-12T19:12:40.614Z,1505243560.614 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:12:41.015Z,1505243561.015 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:12:41.421Z,1505243561.421 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:12:41.800Z,1505243561.800 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:12:41.801Z,1505243561.801 [DAT](DEBUG): Found user prompt
2017-09-12T19:12:41.801Z,1505243561.801 [DAT](INFO): command mode acknowledged
2017-09-12T19:12:42.209Z,1505243562.209 [DAT](INFO): setting local address to 2
2017-09-12T19:12:42.611Z,1505243562.611 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:12:42.612Z,1505243562.612 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:12:42.612Z,1505243562.612 [DAT] Communications Fault, FailCount= 3
2017-09-12T19:12:42.612Z,1505243562.612 [DAT](ERROR): Communications Fault
2017-09-12T19:12:42.753Z,1505243562.753 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:12:43.015Z,1505243563.015 [DAT](INFO): Powering down
2017-09-12T19:12:43.883Z,1505243563.883 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:12:43.883Z,1505243563.883 [DAT] No Fault, FailCount= 3
2017-09-12T19:12:46.212Z,1505243566.212 [DAT](INFO): Powering up
2017-09-12T19:12:46.212Z,1505243566.212 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:12:53.025Z,1505243573.025 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-12T19:12:53.025Z,1505243573.025 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:12:53.025Z,1505243573.025 [BPC1](ERROR): Data Fault
2017-09-12T19:12:53.108Z,1505243573.108 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:12:54.283Z,1505243574.283 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:12:54.283Z,1505243574.283 [BPC1] No Fault, FailCount= 1
2017-09-12T19:13:35.820Z,1505243615.820 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:06:43 
Warning battery low
CONNECT
2017-09-12T19:13:35.820Z,1505243615.820 [DAT](INFO): Got CONNECT
2017-09-12T19:13:35.821Z,1505243615.821 [DAT](INFO): entering command mode
2017-09-12T19:13:36.222Z,1505243616.222 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:13:39.637Z,1505243619.637 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:13:39.637Z,1505243619.637 [DAT](DEBUG): Found user prompt
2017-09-12T19:13:39.637Z,1505243619.637 [DAT](INFO): command mode acknowledged
2017-09-12T19:13:39.832Z,1505243619.832 [DAT](INFO): setting local address to 2
2017-09-12T19:13:40.208Z,1505243620.208 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:13:40.209Z,1505243620.209 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:13:40.209Z,1505243620.209 [DAT] Communications Fault, FailCount= 4
2017-09-12T19:13:40.209Z,1505243620.209 [DAT](ERROR): Communications Fault
2017-09-12T19:13:40.308Z,1505243620.308 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:13:40.614Z,1505243620.614 [DAT](INFO): Powering down
2017-09-12T19:13:41.481Z,1505243621.481 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:13:41.481Z,1505243621.481 [DAT] No Fault, FailCount= 4
2017-09-12T19:13:43.803Z,1505243623.803 [DAT](INFO): Powering up
2017-09-12T19:13:43.803Z,1505243623.803 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:14:33.008Z,1505243673.008 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:07:40 
Warning battery low
CONNECT
2017-09-12T19:14:33.008Z,1505243673.008 [DAT](INFO): Got CONNECT
2017-09-12T19:14:33.009Z,1505243673.009 [DAT](INFO): entering command mode
2017-09-12T19:14:33.410Z,1505243673.410 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:14:33.807Z,1505243673.807 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:14:34.203Z,1505243674.203 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:14:34.607Z,1505243674.607 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:14:34.607Z,1505243674.607 [DAT](DEBUG): Found user prompt
2017-09-12T19:14:34.608Z,1505243674.608 [DAT](INFO): command mode acknowledged
2017-09-12T19:14:35.006Z,1505243675.006 [DAT](INFO): setting local address to 2
2017-09-12T19:14:35.396Z,1505243675.396 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:14:35.397Z,1505243675.397 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:14:35.397Z,1505243675.397 [DAT] Communications Fault, FailCount= 5
2017-09-12T19:14:35.397Z,1505243675.397 [DAT](ERROR): Communications Fault
2017-09-12T19:14:35.495Z,1505243675.495 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:14:35.810Z,1505243675.810 [DAT](INFO): Powering down
2017-09-12T19:14:39.871Z,1505243679.871 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:14:39.872Z,1505243679.872 [DAT] No Fault, FailCount= 5
2017-09-12T19:14:39.944Z,1505243679.944 [DAT](INFO): Powering up
2017-09-12T19:14:39.944Z,1505243679.944 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:15:29.527Z,1505243729.527 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:08:36 
Warning battery low
CONNECT
2017-09-12T19:15:29.527Z,1505243729.527 [DAT](INFO): Got CONNECT
2017-09-12T19:15:29.528Z,1505243729.528 [DAT](INFO): entering command mode
2017-09-12T19:15:29.906Z,1505243729.906 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:15:30.307Z,1505243730.307 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:15:30.715Z,1505243730.715 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:15:30.715Z,1505243730.715 [DAT](DEBUG): Found user prompt
2017-09-12T19:15:30.715Z,1505243730.715 [DAT](INFO): command mode acknowledged
2017-09-12T19:15:31.110Z,1505243731.110 [DAT](INFO): setting local address to 2
2017-09-12T19:15:31.509Z,1505243731.509 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:15:31.510Z,1505243731.510 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:15:31.510Z,1505243731.510 [DAT] Communications Fault, FailCount= 6
2017-09-12T19:15:31.510Z,1505243731.510 [DAT](ERROR): Communications Fault
2017-09-12T19:15:31.605Z,1505243731.605 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:15:31.909Z,1505243731.909 [DAT](INFO): Powering down
2017-09-12T19:15:32.812Z,1505243732.812 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:15:32.812Z,1505243732.812 [DAT] No Fault, FailCount= 6
2017-09-12T19:15:35.115Z,1505243735.115 [DAT](INFO): Powering up
2017-09-12T19:15:35.116Z,1505243735.116 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:15:42.581Z,1505243742.581 [PNI_TCM](ERROR): CRC does not match. Expected:0x53131 got:0x247
2017-09-12T19:16:24.560Z,1505243784.560 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:09:32 
Warning battery low
CONNECT
2017-09-12T19:16:24.560Z,1505243784.560 [DAT](INFO): Got CONNECT
2017-09-12T19:16:24.561Z,1505243784.561 [DAT](INFO): entering command mode
2017-09-12T19:16:24.956Z,1505243784.956 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:16:25.359Z,1505243785.359 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:16:25.760Z,1505243785.760 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:16:26.158Z,1505243786.158 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:16:26.159Z,1505243786.159 [DAT](DEBUG): Found user prompt
2017-09-12T19:16:26.159Z,1505243786.159 [DAT](INFO): command mode acknowledged
2017-09-12T19:16:26.548Z,1505243786.548 [DAT](INFO): setting local address to 2
2017-09-12T19:16:26.945Z,1505243786.945 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:16:26.946Z,1505243786.946 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:16:26.946Z,1505243786.946 [DAT] Communications Fault, FailCount= 7
2017-09-12T19:16:26.946Z,1505243786.946 [DAT](ERROR): Communications Fault
2017-09-12T19:16:27.038Z,1505243787.038 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:16:27.356Z,1505243787.356 [DAT](INFO): Powering down
2017-09-12T19:16:28.229Z,1505243788.229 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:16:28.229Z,1505243788.229 [DAT] No Fault, FailCount= 7
2017-09-12T19:16:30.546Z,1505243790.546 [DAT](INFO): Powering up
2017-09-12T19:16:30.546Z,1505243790.546 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:16:35.827Z,1505243795.827 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-12T19:16:35.827Z,1505243795.827 [Default:CheckIn:C.Wait] Stopped
2017-09-12T19:16:35.827Z,1505243795.827 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T19:16:35.827Z,1505243795.827 [Default:CheckIn:D] Running Loop=1
2017-09-12T19:16:36.208Z,1505243796.208 [Default:CheckIn:D] Stopped
2017-09-12T19:16:36.208Z,1505243796.208 [Default:CheckIn:E] Running Loop=1
2017-09-12T19:16:36.602Z,1505243796.602 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 15.463789 min 
2017-09-12T19:16:36.602Z,1505243796.602 [Default:CheckIn:E] Stopped
2017-09-12T19:16:36.603Z,1505243796.603 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-12T19:16:36.603Z,1505243796.603 [Default:CheckIn] Stopped
2017-09-12T19:16:36.603Z,1505243796.603 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-12T19:16:36.603Z,1505243796.603 [Default:CheckIn](INFO): Running loop #3
2017-09-12T19:16:36.603Z,1505243796.603 [Default:CheckIn] Running Loop=3
2017-09-12T19:16:36.603Z,1505243796.603 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T19:16:36.603Z,1505243796.603 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T19:16:40.109Z,1505243800.109 [NAL9602](INFO): Powering up
2017-09-12T19:16:51.283Z,1505243811.283 [NAL9602](INFO): NAL9602 initialized
2017-09-12T19:16:57.311Z,1505243817.311 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:16:57.311Z,1505243817.311 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:16:57.311Z,1505243817.311 [BPC1](ERROR): Communications Fault
2017-09-12T19:16:57.396Z,1505243817.396 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:16:58.567Z,1505243818.567 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:16:58.567Z,1505243818.567 [BPC1] No Fault, FailCount= 1
2017-09-12T19:17:20.145Z,1505243840.145 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:10:27 
Warning battery low
CONNECT
2017-09-12T19:17:20.145Z,1505243840.145 [DAT](INFO): Got CONNECT
2017-09-12T19:17:20.146Z,1505243840.146 [DAT](INFO): entering command mode
2017-09-12T19:17:20.508Z,1505243840.508 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:17:20.905Z,1505243840.905 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:17:21.319Z,1505243841.319 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:17:21.319Z,1505243841.319 [DAT](DEBUG): Found user prompt
2017-09-12T19:17:21.319Z,1505243841.319 [DAT](INFO): command mode acknowledged
2017-09-12T19:17:21.776Z,1505243841.776 [DAT](INFO): setting local address to 2
2017-09-12T19:17:22.111Z,1505243842.111 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:17:22.112Z,1505243842.112 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:17:22.112Z,1505243842.112 [DAT] Communications Fault, FailCount= 8
2017-09-12T19:17:22.113Z,1505243842.113 [DAT](ERROR): Communications Fault
2017-09-12T19:17:22.248Z,1505243842.248 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:17:22.248Z,1505243842.248 [CBIT](CRITICAL): Communications Fault in component: DAT
2017-09-12T19:17:22.498Z,1505243842.498 [DAT](INFO): Powering down
2017-09-12T19:17:22.742Z,1505243842.742 [CBIT](INFO): Critical error at 20170912T191722
2017-09-12T19:17:36.191Z,1505243856.191 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-12T19:17:53.435Z,1505243873.435 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:17:53.435Z,1505243873.435 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:17:53.436Z,1505243873.436 [BPC1](ERROR): Data Fault
2017-09-12T19:17:53.499Z,1505243873.499 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:17:54.705Z,1505243874.705 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:17:54.705Z,1505243874.705 [BPC1] No Fault, FailCount= 1
2017-09-12T19:19:27.575Z,1505243967.575 [NAL9602](INFO): SBD MO Status=2, MOMSN=479, MT Status=2, MTMSN=0
2017-09-12T19:19:27.576Z,1505243967.576 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:19:59.582Z,1505243999.582 [BPC1](ERROR): Failed to parse message.
2017-09-12T19:19:59.582Z,1505243999.582 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:19:59.582Z,1505243999.582 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:19:59.582Z,1505243999.582 [BPC1](ERROR): Data Fault
2017-09-12T19:19:59.677Z,1505243999.677 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:20:00.824Z,1505244000.824 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:20:00.824Z,1505244000.824 [BPC1] No Fault, FailCount= 1
2017-09-12T19:20:01.552Z,1505244001.552 [NAL9602](INFO): SBD MO Status=2, MOMSN=479, MT Status=2, MTMSN=0
2017-09-12T19:20:01.553Z,1505244001.553 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:20:15.563Z,1505244015.563 [NAL9602](INFO): SBD MO Status=0, MOMSN=479, MT Status=0, MTMSN=0
2017-09-12T19:20:15.563Z,1505244015.563 [NAL9602](INFO): No messages in MT queue
2017-09-12T19:20:16.757Z,1505244016.757 [NAL9602](INFO): GPS fix at 20170912T191804: (36.802734, -121.788043)
2017-09-12T19:20:16.835Z,1505244016.835 [Default:CheckIn:Read_GPS] Stopped
2017-09-12T19:20:16.835Z,1505244016.835 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-12T19:20:21.402Z,1505244021.402 [DataOverHttps](INFO): Sending 127 bytes from file Logs/20170912T185724/Courier0012.lzma
2017-09-12T19:20:22.185Z,1505244022.185 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Courier0012.lzma.bak
2017-09-12T19:20:22.185Z,1505244022.185 [DataOverHttps](INFO): SBD MOMSN=5086318
2017-09-12T19:20:26.528Z,1505244026.528 [NAL9602](INFO): Powering down
2017-09-12T19:20:31.502Z,1505244031.502 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170912T185724/Express0013.lzma
2017-09-12T19:20:32.257Z,1505244032.257 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0013.lzma.bak
2017-09-12T19:20:32.257Z,1505244032.257 [DataOverHttps](INFO): SBD MOMSN=5086323
2017-09-12T19:20:33.000Z,1505244033.000 [Default:CheckIn:Read_Iridium] Stopped
2017-09-12T19:20:33.000Z,1505244033.000 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-12T19:20:33.000Z,1505244033.000 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-12T19:21:06.012Z,1505244066.012 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:21:06.012Z,1505244066.012 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:21:06.013Z,1505244066.013 [BPC1](ERROR): Communications Fault
2017-09-12T19:21:06.083Z,1505244066.083 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:21:07.321Z,1505244067.321 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:21:07.321Z,1505244067.321 [BPC1] No Fault, FailCount= 1
2017-09-12T19:22:22.379Z,1505244142.379 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:22:22.379Z,1505244142.379 [DAT] No Fault, FailCount= 8
2017-09-12T19:22:22.691Z,1505244142.691 [DAT](INFO): Powering up
2017-09-12T19:22:22.691Z,1505244142.691 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:22:43.376Z,1505244163.376 [PNI_TCM](ERROR): CRC does not match. Expected:0x46239 got:0x7104
2017-09-12T19:22:52.982Z,1505244172.982 [PNI_TCM](ERROR): CRC does not match. Expected:0x10231 got:0x18971
2017-09-12T19:23:12.576Z,1505244192.576 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:16:20 
Warning battery low
CONNECT
2017-09-12T19:23:12.576Z,1505244192.576 [DAT](INFO): Got CONNECT
2017-09-12T19:23:12.577Z,1505244192.577 [DAT](INFO): entering command mode
2017-09-12T19:23:12.979Z,1505244192.979 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:23:13.377Z,1505244193.377 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:23:13.761Z,1505244193.761 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:23:14.169Z,1505244194.169 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:23:14.170Z,1505244194.170 [DAT](DEBUG): Found user prompt
2017-09-12T19:23:14.170Z,1505244194.170 [DAT](INFO): command mode acknowledged
2017-09-12T19:23:14.570Z,1505244194.570 [DAT](INFO): setting local address to 2
2017-09-12T19:23:14.974Z,1505244194.974 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:23:14.976Z,1505244194.976 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:23:14.976Z,1505244194.976 [DAT] Communications Fault, FailCount= 1
2017-09-12T19:23:14.976Z,1505244194.976 [DAT](ERROR): Communications Fault
2017-09-12T19:23:15.060Z,1505244195.060 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:23:15.367Z,1505244195.367 [DAT](INFO): Powering down
2017-09-12T19:23:16.246Z,1505244196.246 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:23:16.246Z,1505244196.246 [DAT] No Fault, FailCount= 1
2017-09-12T19:23:18.573Z,1505244198.573 [DAT](INFO): Powering up
2017-09-12T19:23:18.574Z,1505244198.574 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:24:07.818Z,1505244247.818 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:17:15 
Warning battery low
CONNECT
2017-09-12T19:24:07.819Z,1505244247.819 [DAT](INFO): Got CONNECT
2017-09-12T19:24:07.819Z,1505244247.819 [DAT](INFO): entering command mode
2017-09-12T19:24:08.211Z,1505244248.211 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:24:08.610Z,1505244248.610 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:24:09.012Z,1505244249.012 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:24:09.421Z,1505244249.421 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:24:09.421Z,1505244249.421 [DAT](DEBUG): Found user prompt
2017-09-12T19:24:09.421Z,1505244249.421 [DAT](INFO): command mode acknowledged
2017-09-12T19:24:09.819Z,1505244249.819 [DAT](INFO): setting local address to 2
2017-09-12T19:24:10.223Z,1505244250.223 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:24:10.224Z,1505244250.224 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:24:10.224Z,1505244250.224 [DAT] Communications Fault, FailCount= 2
2017-09-12T19:24:10.224Z,1505244250.224 [DAT](ERROR): Communications Fault
2017-09-12T19:24:10.327Z,1505244250.327 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:24:10.613Z,1505244250.613 [DAT](INFO): Powering down
2017-09-12T19:24:11.508Z,1505244251.508 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:24:11.508Z,1505244251.508 [DAT] No Fault, FailCount= 2
2017-09-12T19:24:13.821Z,1505244253.821 [DAT](INFO): Powering up
2017-09-12T19:24:13.822Z,1505244253.822 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:25:03.229Z,1505244303.229 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:18:10 
Warning battery low
CONNECT
2017-09-12T19:25:03.229Z,1505244303.229 [DAT](INFO): Got CONNECT
2017-09-12T19:25:03.230Z,1505244303.230 [DAT](INFO): entering command mode
2017-09-12T19:25:03.646Z,1505244303.646 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:25:04.007Z,1505244304.007 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:25:04.418Z,1505244304.418 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:25:04.806Z,1505244304.806 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:25:04.807Z,1505244304.807 [DAT](DEBUG): Found user prompt
2017-09-12T19:25:04.807Z,1505244304.807 [DAT](INFO): command mode acknowledged
2017-09-12T19:25:05.195Z,1505244305.195 [DAT](INFO): setting local address to 2
2017-09-12T19:25:05.606Z,1505244305.606 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:25:05.607Z,1505244305.607 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:25:05.607Z,1505244305.607 [DAT] Communications Fault, FailCount= 3
2017-09-12T19:25:05.607Z,1505244305.607 [DAT](ERROR): Communications Fault
2017-09-12T19:25:05.692Z,1505244305.692 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:25:06.004Z,1505244306.004 [DAT](INFO): Powering down
2017-09-12T19:25:06.879Z,1505244306.879 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:25:06.879Z,1505244306.879 [DAT] No Fault, FailCount= 3
2017-09-12T19:25:09.209Z,1505244309.209 [DAT](INFO): Powering up
2017-09-12T19:25:09.209Z,1505244309.209 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:25:33.256Z,1505244333.256 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-12T19:25:33.256Z,1505244333.256 [Default:CheckIn:C.Wait] Stopped
2017-09-12T19:25:33.256Z,1505244333.256 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T19:25:33.256Z,1505244333.256 [Default:CheckIn:D] Running Loop=1
2017-09-12T19:25:33.678Z,1505244333.678 [Default:CheckIn:D] Stopped
2017-09-12T19:25:33.678Z,1505244333.678 [Default:CheckIn:E] Running Loop=1
2017-09-12T19:25:34.071Z,1505244334.071 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 24.421625 min 
2017-09-12T19:25:34.071Z,1505244334.071 [Default:CheckIn:E] Stopped
2017-09-12T19:25:34.071Z,1505244334.071 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-12T19:25:34.071Z,1505244334.071 [Default:CheckIn] Stopped
2017-09-12T19:25:34.071Z,1505244334.071 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-12T19:25:34.072Z,1505244334.072 [Default:CheckIn](INFO): Running loop #4
2017-09-12T19:25:34.072Z,1505244334.072 [Default:CheckIn] Running Loop=4
2017-09-12T19:25:34.076Z,1505244334.076 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T19:25:34.076Z,1505244334.076 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T19:25:37.889Z,1505244337.889 [NAL9602](INFO): Powering up
2017-09-12T19:25:48.829Z,1505244348.829 [NAL9602](INFO): NAL9602 initialized
2017-09-12T19:25:58.458Z,1505244358.458 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:19:06 
Warning battery low
CONNECT
2017-09-12T19:25:58.458Z,1505244358.458 [DAT](INFO): Got CONNECT
2017-09-12T19:25:58.467Z,1505244358.467 [DAT](INFO): entering command mode
2017-09-12T19:25:58.845Z,1505244358.845 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:25:59.250Z,1505244359.250 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:25:59.647Z,1505244359.647 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:26:00.047Z,1505244360.047 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:26:00.048Z,1505244360.048 [DAT](DEBUG): Found user prompt
2017-09-12T19:26:00.048Z,1505244360.048 [DAT](INFO): command mode acknowledged
2017-09-12T19:26:00.460Z,1505244360.460 [DAT](INFO): setting local address to 2
2017-09-12T19:26:00.857Z,1505244360.857 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:26:00.858Z,1505244360.858 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:26:00.858Z,1505244360.858 [DAT] Communications Fault, FailCount= 4
2017-09-12T19:26:00.858Z,1505244360.858 [DAT](ERROR): Communications Fault
2017-09-12T19:26:00.946Z,1505244360.946 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:26:01.279Z,1505244361.279 [DAT](INFO): Powering down
2017-09-12T19:26:02.123Z,1505244362.123 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:26:02.123Z,1505244362.123 [DAT] No Fault, FailCount= 4
2017-09-12T19:26:04.446Z,1505244364.446 [DAT](INFO): Powering up
2017-09-12T19:26:04.446Z,1505244364.446 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:26:37.736Z,1505244397.736 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:26:37.736Z,1505244397.736 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:26:37.736Z,1505244397.736 [BPC1](ERROR): Communications Fault
2017-09-12T19:26:37.826Z,1505244397.826 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:26:38.773Z,1505244398.773 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:26:38.773Z,1505244398.773 [BPC1] No Fault, FailCount= 1
2017-09-12T19:26:53.490Z,1505244413.490 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:26:53.490Z,1505244413.490 [BPC1] Data Fault, FailCount= 2
2017-09-12T19:26:53.490Z,1505244413.490 [BPC1](ERROR): Data Fault
2017-09-12T19:26:53.554Z,1505244413.554 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:26:53.865Z,1505244413.865 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:20:01 
Warning battery low
CONNECT
2017-09-12T19:26:53.865Z,1505244413.865 [DAT](INFO): Got CONNECT
2017-09-12T19:26:53.866Z,1505244413.866 [DAT](INFO): entering command mode
2017-09-12T19:26:54.261Z,1505244414.261 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:26:54.666Z,1505244414.666 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:26:54.736Z,1505244414.736 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:26:54.736Z,1505244414.736 [BPC1] No Fault, FailCount= 2
2017-09-12T19:26:55.074Z,1505244415.074 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:26:55.485Z,1505244415.485 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:26:55.485Z,1505244415.485 [DAT](DEBUG): Found user prompt
2017-09-12T19:26:55.485Z,1505244415.485 [DAT](INFO): command mode acknowledged
2017-09-12T19:26:55.875Z,1505244415.875 [DAT](INFO): setting local address to 2
2017-09-12T19:26:56.281Z,1505244416.281 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:26:56.282Z,1505244416.282 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:26:56.282Z,1505244416.282 [DAT] Communications Fault, FailCount= 5
2017-09-12T19:26:56.282Z,1505244416.282 [DAT](ERROR): Communications Fault
2017-09-12T19:26:56.339Z,1505244416.339 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:26:56.679Z,1505244416.679 [DAT](INFO): Powering down
2017-09-12T19:26:57.546Z,1505244417.546 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:26:57.546Z,1505244417.546 [DAT] No Fault, FailCount= 5
2017-09-12T19:26:59.862Z,1505244419.862 [DAT](INFO): Powering up
2017-09-12T19:26:59.862Z,1505244419.862 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:27:38.085Z,1505244458.085 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-12T19:27:49.337Z,1505244469.337 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:20:56 
Warning battery low
CONNECT
2017-09-12T19:27:49.337Z,1505244469.337 [DAT](INFO): Got CONNECT
2017-09-12T19:27:49.337Z,1505244469.337 [DAT](INFO): entering command mode
2017-09-12T19:27:49.729Z,1505244469.729 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:27:50.129Z,1505244470.129 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:27:50.534Z,1505244470.534 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:27:50.934Z,1505244470.934 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:27:50.934Z,1505244470.934 [DAT](DEBUG): Found user prompt
2017-09-12T19:27:50.934Z,1505244470.934 [DAT](INFO): command mode acknowledged
2017-09-12T19:27:51.323Z,1505244471.323 [DAT](INFO): setting local address to 2
2017-09-12T19:27:51.720Z,1505244471.720 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:27:51.721Z,1505244471.721 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:27:51.721Z,1505244471.721 [DAT] Communications Fault, FailCount= 6
2017-09-12T19:27:51.721Z,1505244471.721 [DAT](ERROR): Communications Fault
2017-09-12T19:27:51.819Z,1505244471.819 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:27:52.121Z,1505244472.121 [DAT](INFO): Powering down
2017-09-12T19:27:52.911Z,1505244472.911 [NAL9602](INFO): SBD MO Status=2, MOMSN=480, MT Status=2, MTMSN=0
2017-09-12T19:27:52.911Z,1505244472.911 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:27:53.015Z,1505244473.015 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:27:53.015Z,1505244473.015 [DAT] No Fault, FailCount= 6
2017-09-12T19:27:55.338Z,1505244475.338 [DAT](INFO): Powering up
2017-09-12T19:27:55.338Z,1505244475.338 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:28:05.703Z,1505244485.703 [NAL9602](INFO): SBD MO Status=2, MOMSN=480, MT Status=2, MTMSN=0
2017-09-12T19:28:05.703Z,1505244485.703 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:28:24.137Z,1505244504.137 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:28:24.137Z,1505244504.137 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:28:24.137Z,1505244504.137 [BPC1](ERROR): Communications Fault
2017-09-12T19:28:24.223Z,1505244504.223 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:28:25.408Z,1505244505.408 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:28:25.408Z,1505244505.408 [BPC1] No Fault, FailCount= 1
2017-09-12T19:28:46.166Z,1505244526.166 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:21:53 
Warning battery low
CONNECT
2017-09-12T19:28:46.166Z,1505244526.166 [DAT](INFO): Got CONNECT
2017-09-12T19:28:46.167Z,1505244526.167 [DAT](INFO): entering command mode
2017-09-12T19:28:46.557Z,1505244526.557 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:28:46.947Z,1505244526.947 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:28:47.339Z,1505244527.339 [NAL9602](INFO): SBD MO Status=2, MOMSN=480, MT Status=2, MTMSN=0
2017-09-12T19:28:47.339Z,1505244527.339 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:28:47.356Z,1505244527.356 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:28:47.762Z,1505244527.762 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:28:47.763Z,1505244527.763 [DAT](DEBUG): Found user prompt
2017-09-12T19:28:47.763Z,1505244527.763 [DAT](INFO): command mode acknowledged
2017-09-12T19:28:48.154Z,1505244528.154 [DAT](INFO): setting local address to 2
2017-09-12T19:28:48.558Z,1505244528.558 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:28:48.559Z,1505244528.559 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:28:48.559Z,1505244528.559 [DAT] Communications Fault, FailCount= 7
2017-09-12T19:28:48.559Z,1505244528.559 [DAT](ERROR): Communications Fault
2017-09-12T19:28:48.654Z,1505244528.654 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:28:48.953Z,1505244528.953 [DAT](INFO): Powering down
2017-09-12T19:28:49.813Z,1505244529.813 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:28:49.813Z,1505244529.813 [DAT] No Fault, FailCount= 7
2017-09-12T19:28:52.157Z,1505244532.157 [DAT](INFO): Powering up
2017-09-12T19:28:52.158Z,1505244532.158 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:29:41.605Z,1505244581.605 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:22:49 
Warning battery low
CONNECT
2017-09-12T19:29:41.605Z,1505244581.605 [DAT](INFO): Got CONNECT
2017-09-12T19:29:41.605Z,1505244581.605 [DAT](INFO): entering command mode
2017-09-12T19:29:41.990Z,1505244581.990 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:29:42.391Z,1505244582.391 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:29:42.798Z,1505244582.798 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:29:43.192Z,1505244583.192 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:29:43.192Z,1505244583.192 [DAT](DEBUG): Found user prompt
2017-09-12T19:29:43.192Z,1505244583.192 [DAT](INFO): command mode acknowledged
2017-09-12T19:29:43.608Z,1505244583.608 [DAT](INFO): setting local address to 2
2017-09-12T19:29:43.989Z,1505244583.989 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:29:43.990Z,1505244583.990 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:29:43.990Z,1505244583.990 [DAT] Communications Fault, FailCount= 8
2017-09-12T19:29:43.991Z,1505244583.991 [DAT](ERROR): Communications Fault
2017-09-12T19:29:44.086Z,1505244584.086 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:29:44.087Z,1505244584.087 [CBIT](CRITICAL): Communications Fault in component: DAT
2017-09-12T19:29:44.390Z,1505244584.390 [DAT](INFO): Powering down
2017-09-12T19:29:44.553Z,1505244584.553 [CBIT](INFO): Critical error at 20170912T192944
2017-09-12T19:29:58.778Z,1505244598.778 [NAL9602](INFO): SBD MO Status=2, MOMSN=480, MT Status=2, MTMSN=0
2017-09-12T19:29:58.778Z,1505244598.778 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:30:34.434Z,1505244634.434 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-09-12T19:25:34.1Z
2017-09-12T19:30:34.434Z,1505244634.434 [Default:CheckIn:Read_GPS] Stopped
2017-09-12T19:30:34.434Z,1505244634.434 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-12T19:30:38.604Z,1505244638.604 [DataOverHttps](INFO): Sending 92 bytes from file Logs/20170912T185724/Courier0016.lzma
2017-09-12T19:30:39.394Z,1505244639.394 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Courier0016.lzma.bak
2017-09-12T19:30:39.395Z,1505244639.395 [DataOverHttps](INFO): SBD MOMSN=5086327
2017-09-12T19:30:48.674Z,1505244648.674 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170912T185724/Express0017.lzma
2017-09-12T19:30:49.461Z,1505244649.461 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0017.lzma.bak
2017-09-12T19:30:49.461Z,1505244649.461 [DataOverHttps](INFO): SBD MOMSN=5086330
2017-09-12T19:30:50.246Z,1505244650.246 [Default:CheckIn:Read_Iridium] Stopped
2017-09-12T19:30:50.246Z,1505244650.246 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-12T19:30:50.247Z,1505244650.247 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-12T19:30:53.592Z,1505244653.592 [NAL9602](INFO): SBD MO Status=2, MOMSN=480, MT Status=2, MTMSN=0
2017-09-12T19:30:53.592Z,1505244653.592 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:30:53.713Z,1505244653.713 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-12T19:30:59.300Z,1505244659.300 [NAL9602](INFO): Powering down
2017-09-12T19:33:07.294Z,1505244787.294 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:33:07.294Z,1505244787.294 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:33:07.294Z,1505244787.294 [BPC1](ERROR): Data Fault
2017-09-12T19:33:07.345Z,1505244787.345 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:33:08.541Z,1505244788.541 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:33:08.541Z,1505244788.541 [BPC1] No Fault, FailCount= 1
2017-09-12T19:34:21.164Z,1505244861.164 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-12T19:34:21.164Z,1505244861.164 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:34:21.164Z,1505244861.164 [BPC1](ERROR): Data Fault
2017-09-12T19:34:21.228Z,1505244861.228 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:34:22.428Z,1505244862.428 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:34:22.428Z,1505244862.428 [BPC1] No Fault, FailCount= 1
2017-09-12T19:34:44.036Z,1505244884.036 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:34:44.036Z,1505244884.036 [DAT] No Fault, FailCount= 8
2017-09-12T19:34:44.356Z,1505244884.356 [DAT](INFO): Powering up
2017-09-12T19:34:44.356Z,1505244884.356 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:35:34.462Z,1505244934.462 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:28:41 
Warning battery low
CONNECT
2017-09-12T19:35:34.463Z,1505244934.463 [DAT](INFO): Got CONNECT
2017-09-12T19:35:34.463Z,1505244934.463 [DAT](INFO): entering command mode
2017-09-12T19:35:34.851Z,1505244934.851 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:35:35.255Z,1505244935.255 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:35:35.660Z,1505244935.660 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:35:36.049Z,1505244936.049 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:35:36.050Z,1505244936.050 [DAT](DEBUG): Found user prompt
2017-09-12T19:35:36.050Z,1505244936.050 [DAT](INFO): command mode acknowledged
2017-09-12T19:35:36.450Z,1505244936.450 [DAT](INFO): setting local address to 2
2017-09-12T19:35:36.857Z,1505244936.857 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:35:36.858Z,1505244936.858 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:35:36.858Z,1505244936.858 [DAT] Communications Fault, FailCount= 1
2017-09-12T19:35:36.859Z,1505244936.859 [DAT](ERROR): Communications Fault
2017-09-12T19:35:36.932Z,1505244936.932 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:35:37.265Z,1505244937.265 [DAT](INFO): Powering down
2017-09-12T19:35:38.130Z,1505244938.130 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:35:38.130Z,1505244938.130 [DAT] No Fault, FailCount= 1
2017-09-12T19:35:40.456Z,1505244940.456 [DAT](INFO): Powering up
2017-09-12T19:35:40.456Z,1505244940.456 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:35:50.531Z,1505244950.531 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-12T19:35:50.531Z,1505244950.531 [Default:CheckIn:C.Wait] Stopped
2017-09-12T19:35:50.531Z,1505244950.531 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T19:35:50.531Z,1505244950.531 [Default:CheckIn:D] Running Loop=1
2017-09-12T19:35:50.925Z,1505244950.925 [Default:CheckIn:D] Stopped
2017-09-12T19:35:50.925Z,1505244950.925 [Default:CheckIn:E] Running Loop=1
2017-09-12T19:35:51.325Z,1505244951.325 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 34.709074 min 
2017-09-12T19:35:51.325Z,1505244951.325 [Default:CheckIn:E] Stopped
2017-09-12T19:35:51.325Z,1505244951.325 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-12T19:35:51.325Z,1505244951.325 [Default:CheckIn] Stopped
2017-09-12T19:35:51.325Z,1505244951.325 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-12T19:35:51.326Z,1505244951.326 [Default:CheckIn](INFO): Running loop #5
2017-09-12T19:35:51.326Z,1505244951.326 [Default:CheckIn] Running Loop=5
2017-09-12T19:35:51.326Z,1505244951.326 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T19:35:51.326Z,1505244951.326 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T19:35:54.892Z,1505244954.892 [NAL9602](INFO): Powering up
2017-09-12T19:36:05.824Z,1505244965.824 [NAL9602](INFO): NAL9602 initialized
2017-09-12T19:36:06.629Z,1505244966.629 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-09-12T19:36:06.629Z,1505244966.629 [NAL9602] Data Fault, FailCount= 1
2017-09-12T19:36:06.629Z,1505244966.629 [NAL9602](ERROR): Data Fault
2017-09-12T19:36:06.725Z,1505244966.725 [CBIT](ERROR): Data Fault in component: NAL9602
2017-09-12T19:36:07.023Z,1505244967.023 [NAL9602](INFO): Powering down
2017-09-12T19:36:07.934Z,1505244967.934 [CBIT](INFO): Clearing failed state for component NAL9602
2017-09-12T19:36:07.934Z,1505244967.934 [NAL9602] No Fault, FailCount= 1
2017-09-12T19:36:12.235Z,1505244972.235 [NAL9602](INFO): Powering up NAL9602
2017-09-12T19:36:23.424Z,1505244983.424 [NAL9602](INFO): NAL9602 initialized
2017-09-12T19:36:29.844Z,1505244989.844 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:29:37 
Warning battery low
CONNECT
2017-09-12T19:36:29.844Z,1505244989.844 [DAT](INFO): Got CONNECT
2017-09-12T19:36:29.845Z,1505244989.845 [DAT](INFO): entering command mode
2017-09-12T19:36:30.252Z,1505244990.252 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:36:30.649Z,1505244990.649 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:36:31.048Z,1505244991.048 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:36:31.448Z,1505244991.448 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:36:31.449Z,1505244991.449 [DAT](DEBUG): Found user prompt
2017-09-12T19:36:31.449Z,1505244991.449 [DAT](INFO): command mode acknowledged
2017-09-12T19:36:31.853Z,1505244991.853 [DAT](INFO): setting local address to 2
2017-09-12T19:36:32.263Z,1505244992.263 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:36:32.264Z,1505244992.264 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:36:32.264Z,1505244992.264 [DAT] Communications Fault, FailCount= 2
2017-09-12T19:36:32.264Z,1505244992.264 [DAT](ERROR): Communications Fault
2017-09-12T19:36:32.346Z,1505244992.346 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:36:32.639Z,1505244992.639 [DAT](INFO): Powering down
2017-09-12T19:36:33.506Z,1505244993.506 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:36:33.506Z,1505244993.506 [DAT] No Fault, FailCount= 2
2017-09-12T19:36:35.840Z,1505244995.840 [DAT](INFO): Powering up
2017-09-12T19:36:35.840Z,1505244995.840 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:37:25.058Z,1505245045.058 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:30:32 
Warning battery low
CONNECT
2017-09-12T19:37:25.058Z,1505245045.058 [DAT](INFO): Got CONNECT
2017-09-12T19:37:25.059Z,1505245045.059 [DAT](INFO): entering command mode
2017-09-12T19:37:25.449Z,1505245045.449 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:37:25.838Z,1505245045.838 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:37:26.235Z,1505245046.235 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:37:26.633Z,1505245046.633 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:37:26.633Z,1505245046.633 [DAT](DEBUG): Found user prompt
2017-09-12T19:37:26.633Z,1505245046.633 [DAT](INFO): command mode acknowledged
2017-09-12T19:37:27.037Z,1505245047.037 [DAT](INFO): setting local address to 2
2017-09-12T19:37:27.438Z,1505245047.438 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:37:27.439Z,1505245047.439 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:37:27.439Z,1505245047.439 [DAT] Communications Fault, FailCount= 3
2017-09-12T19:37:27.439Z,1505245047.439 [DAT](ERROR): Communications Fault
2017-09-12T19:37:27.541Z,1505245047.541 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:37:27.830Z,1505245047.830 [DAT](INFO): Powering down
2017-09-12T19:37:28.701Z,1505245048.701 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:37:28.701Z,1505245048.701 [DAT] No Fault, FailCount= 3
2017-09-12T19:37:31.036Z,1505245051.036 [DAT](INFO): Powering up
2017-09-12T19:37:31.036Z,1505245051.036 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:37:38.328Z,1505245058.328 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-12T19:37:41.032Z,1505245061.032 [NAL9602](INFO): SBD MO Status=2, MOMSN=480, MT Status=2, MTMSN=0
2017-09-12T19:37:41.032Z,1505245061.032 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:38:10.874Z,1505245090.874 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:38:10.874Z,1505245090.874 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:38:10.874Z,1505245090.874 [BPC1](ERROR): Communications Fault
2017-09-12T19:38:10.942Z,1505245090.942 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:38:12.131Z,1505245092.131 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:38:12.131Z,1505245092.131 [BPC1] No Fault, FailCount= 1
2017-09-12T19:38:20.466Z,1505245100.466 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:31:27 
Warning battery low
CONNECT
2017-09-12T19:38:20.467Z,1505245100.467 [DAT](INFO): Got CONNECT
2017-09-12T19:38:20.467Z,1505245100.467 [DAT](INFO): entering command mode
2017-09-12T19:38:20.861Z,1505245100.861 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:38:21.267Z,1505245101.267 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:38:21.662Z,1505245101.662 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:38:22.064Z,1505245102.064 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:38:22.064Z,1505245102.064 [DAT](DEBUG): Found user prompt
2017-09-12T19:38:22.064Z,1505245102.064 [DAT](INFO): command mode acknowledged
2017-09-12T19:38:22.449Z,1505245102.449 [DAT](INFO): setting local address to 2
2017-09-12T19:38:22.857Z,1505245102.857 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:38:22.858Z,1505245102.858 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:38:22.858Z,1505245102.858 [DAT] Communications Fault, FailCount= 4
2017-09-12T19:38:22.858Z,1505245102.858 [DAT](ERROR): Communications Fault
2017-09-12T19:38:22.940Z,1505245102.940 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:38:23.258Z,1505245103.258 [DAT](INFO): Powering down
2017-09-12T19:38:24.145Z,1505245104.145 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:38:24.145Z,1505245104.145 [DAT] No Fault, FailCount= 4
2017-09-12T19:38:26.454Z,1505245106.454 [DAT](INFO): Powering up
2017-09-12T19:38:26.454Z,1505245106.454 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:38:40.451Z,1505245120.451 [NAL9602](INFO): SBD MO Status=2, MOMSN=480, MT Status=2, MTMSN=0
2017-09-12T19:38:40.451Z,1505245120.451 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:38:44.876Z,1505245124.876 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:38:44.876Z,1505245124.876 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:38:44.876Z,1505245124.876 [BPC1](ERROR): Communications Fault
2017-09-12T19:38:44.934Z,1505245124.934 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:38:46.129Z,1505245126.129 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:38:46.129Z,1505245126.129 [BPC1] No Fault, FailCount= 1
2017-09-12T19:38:49.641Z,1505245129.641 [NAL9602](INFO): SBD MO Status=0, MOMSN=480, MT Status=0, MTMSN=0
2017-09-12T19:38:49.641Z,1505245129.641 [NAL9602](INFO): No messages in MT queue
2017-09-12T19:39:15.862Z,1505245155.862 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:32:23 
Warning battery low
CONNECT
2017-09-12T19:39:15.862Z,1505245155.862 [DAT](INFO): Got CONNECT
2017-09-12T19:39:15.863Z,1505245155.863 [DAT](INFO): entering command mode
2017-09-12T19:39:16.264Z,1505245156.264 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:39:16.668Z,1505245156.668 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:39:17.069Z,1505245157.069 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:39:17.449Z,1505245157.449 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:39:17.449Z,1505245157.449 [DAT](DEBUG): Found user prompt
2017-09-12T19:39:17.449Z,1505245157.449 [DAT](INFO): command mode acknowledged
2017-09-12T19:39:17.847Z,1505245157.847 [DAT](INFO): setting local address to 2
2017-09-12T19:39:18.300Z,1505245158.300 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:39:18.301Z,1505245158.301 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:39:18.301Z,1505245158.301 [DAT] Communications Fault, FailCount= 5
2017-09-12T19:39:18.301Z,1505245158.301 [DAT](ERROR): Communications Fault
2017-09-12T19:39:18.407Z,1505245158.407 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:39:18.655Z,1505245158.655 [DAT](INFO): Powering down
2017-09-12T19:39:19.566Z,1505245159.566 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:39:19.566Z,1505245159.566 [DAT] No Fault, FailCount= 5
2017-09-12T19:39:21.866Z,1505245161.866 [DAT](INFO): Powering up
2017-09-12T19:39:21.866Z,1505245161.866 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:40:11.072Z,1505245211.072 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:33:19 
Warning battery low
CONNECT
2017-09-12T19:40:11.072Z,1505245211.072 [DAT](INFO): Got CONNECT
2017-09-12T19:40:11.073Z,1505245211.073 [DAT](INFO): entering command mode
2017-09-12T19:40:11.434Z,1505245211.434 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:40:11.834Z,1505245211.834 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:40:12.256Z,1505245212.256 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:40:12.627Z,1505245212.627 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:40:12.627Z,1505245212.627 [DAT](DEBUG): Found user prompt
2017-09-12T19:40:12.628Z,1505245212.628 [DAT](INFO): command mode acknowledged
2017-09-12T19:40:13.050Z,1505245213.050 [DAT](INFO): setting local address to 2
2017-09-12T19:40:13.444Z,1505245213.444 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:40:13.445Z,1505245213.445 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:40:13.445Z,1505245213.445 [DAT] Communications Fault, FailCount= 6
2017-09-12T19:40:13.445Z,1505245213.445 [DAT](ERROR): Communications Fault
2017-09-12T19:40:13.539Z,1505245213.539 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:40:13.851Z,1505245213.851 [DAT](INFO): Powering down
2017-09-12T19:40:13.973Z,1505245213.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:14.231Z,1505245214.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:14.631Z,1505245214.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:14.718Z,1505245214.718 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:40:14.718Z,1505245214.718 [DAT] No Fault, FailCount= 6
2017-09-12T19:40:15.026Z,1505245215.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:15.443Z,1505245215.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:15.841Z,1505245215.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:16.256Z,1505245216.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:16.659Z,1505245216.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:17.052Z,1505245217.052 [DAT](INFO): Powering up
2017-09-12T19:40:17.053Z,1505245217.053 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:40:17.073Z,1505245217.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:17.435Z,1505245217.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:17.840Z,1505245217.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:18.252Z,1505245218.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:18.645Z,1505245218.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:19.047Z,1505245219.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:19.450Z,1505245219.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:19.858Z,1505245219.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:20.250Z,1505245220.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:20.637Z,1505245220.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:21.029Z,1505245221.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:21.441Z,1505245221.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:21.844Z,1505245221.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:22.258Z,1505245222.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:22.659Z,1505245222.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:23.042Z,1505245223.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:23.432Z,1505245223.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:23.851Z,1505245223.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:24.234Z,1505245224.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:24.638Z,1505245224.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:25.050Z,1505245225.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:25.462Z,1505245225.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:25.857Z,1505245225.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:26.242Z,1505245226.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:26.642Z,1505245226.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:27.043Z,1505245227.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:27.444Z,1505245227.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:27.848Z,1505245227.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:28.255Z,1505245228.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:28.654Z,1505245228.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:29.053Z,1505245229.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:29.441Z,1505245229.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:29.839Z,1505245229.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:30.244Z,1505245230.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:30.639Z,1505245230.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:31.043Z,1505245231.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:31.455Z,1505245231.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:31.861Z,1505245231.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:32.231Z,1505245232.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:32.644Z,1505245232.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:33.038Z,1505245233.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:33.446Z,1505245233.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:33.845Z,1505245233.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:34.249Z,1505245234.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:34.660Z,1505245234.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:35.066Z,1505245235.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:35.435Z,1505245235.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:35.844Z,1505245235.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:36.248Z,1505245236.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:36.640Z,1505245236.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:37.053Z,1505245237.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:37.470Z,1505245237.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:37.852Z,1505245237.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:38.237Z,1505245238.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:38.629Z,1505245238.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:39.032Z,1505245239.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:39.437Z,1505245239.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:39.838Z,1505245239.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:40.246Z,1505245240.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:40.644Z,1505245240.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:41.052Z,1505245241.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:41.440Z,1505245241.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:41.830Z,1505245241.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:42.242Z,1505245242.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:42.647Z,1505245242.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:43.050Z,1505245243.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:43.451Z,1505245243.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:43.856Z,1505245243.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:44.236Z,1505245244.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:44.643Z,1505245244.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:45.031Z,1505245245.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:45.440Z,1505245245.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:45.835Z,1505245245.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:46.255Z,1505245246.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:46.617Z,1505245246.617 [NAL9602](INFO): GPS fix at 20170912T193834: (36.802670, -121.788056)
2017-09-12T19:40:46.639Z,1505245246.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:46.704Z,1505245246.704 [Default:CheckIn:Read_GPS] Stopped
2017-09-12T19:40:46.704Z,1505245246.704 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-12T19:40:47.043Z,1505245247.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:47.656Z,1505245247.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:47.960Z,1505245247.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:51.267Z,1505245251.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:51.383Z,1505245251.383 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170912T185724/Courier0020.lzma
2017-09-12T19:40:51.419Z,1505245251.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:51.741Z,1505245251.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:52.118Z,1505245252.118 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Courier0020.lzma.bak
2017-09-12T19:40:52.118Z,1505245252.118 [DataOverHttps](INFO): SBD MOMSN=5086335
2017-09-12T19:40:52.163Z,1505245252.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:53.017Z,1505245253.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:53.187Z,1505245253.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:56.461Z,1505245256.461 [NAL9602](INFO): Powering down
2017-09-12T19:40:57.439Z,1505245257.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:57.848Z,1505245257.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:40:58.238Z,1505245258.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:01.783Z,1505245261.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:01.892Z,1505245261.892 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20170912T185724/Express0021.lzma
2017-09-12T19:41:01.927Z,1505245261.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:02.306Z,1505245262.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:02.687Z,1505245262.687 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0021.lzma.bak
2017-09-12T19:41:02.687Z,1505245262.687 [DataOverHttps](INFO): SBD MOMSN=5086339
2017-09-12T19:41:02.735Z,1505245262.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:03.390Z,1505245263.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:03.431Z,1505245263.431 [Default:CheckIn:Read_Iridium] Stopped
2017-09-12T19:41:03.432Z,1505245263.432 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-12T19:41:03.432Z,1505245263.432 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-12T19:41:03.512Z,1505245263.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:07.097Z,1505245267.097 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:34:13 
Warning battery low
CONNECT
2017-09-12T19:41:07.097Z,1505245267.097 [DAT](INFO): Got CONNECT
2017-09-12T19:41:07.098Z,1505245267.098 [DAT](INFO): entering command mode
2017-09-12T19:41:07.217Z,1505245267.217 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:41:07.598Z,1505245267.598 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:41:08.002Z,1505245268.002 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:41:08.003Z,1505245268.003 [DAT](DEBUG): Found user prompt
2017-09-12T19:41:08.003Z,1505245268.003 [DAT](INFO): command mode acknowledged
2017-09-12T19:41:08.004Z,1505245268.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:08.403Z,1505245268.403 [DAT](INFO): setting local address to 2
2017-09-12T19:41:08.410Z,1505245268.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:08.808Z,1505245268.808 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:41:08.809Z,1505245268.809 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:41:08.809Z,1505245268.809 [DAT] Communications Fault, FailCount= 7
2017-09-12T19:41:08.809Z,1505245268.809 [DAT](ERROR): Communications Fault
2017-09-12T19:41:08.811Z,1505245268.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:08.895Z,1505245268.895 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:41:09.196Z,1505245269.196 [DAT](INFO): Powering down
2017-09-12T19:41:09.312Z,1505245269.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:09.598Z,1505245269.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:09.998Z,1505245269.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:10.079Z,1505245270.079 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:41:10.079Z,1505245270.079 [DAT] No Fault, FailCount= 7
2017-09-12T19:41:10.399Z,1505245270.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:10.800Z,1505245270.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:11.207Z,1505245271.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:11.601Z,1505245271.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:12.008Z,1505245272.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:12.401Z,1505245272.401 [DAT](INFO): Powering up
2017-09-12T19:41:12.401Z,1505245272.401 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:41:12.420Z,1505245272.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:12.813Z,1505245272.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:13.212Z,1505245273.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:13.596Z,1505245273.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:14.005Z,1505245274.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:14.410Z,1505245274.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:14.822Z,1505245274.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:15.199Z,1505245275.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:15.599Z,1505245275.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:16.008Z,1505245276.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:16.401Z,1505245276.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:16.801Z,1505245276.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:17.209Z,1505245277.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:17.609Z,1505245277.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:18.010Z,1505245278.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:18.399Z,1505245278.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:18.796Z,1505245278.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:19.217Z,1505245279.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:19.598Z,1505245279.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:19.998Z,1505245279.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:20.399Z,1505245280.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:20.812Z,1505245280.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:21.200Z,1505245281.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:21.614Z,1505245281.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:22.030Z,1505245282.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:22.419Z,1505245282.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:22.799Z,1505245282.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:23.223Z,1505245283.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:23.609Z,1505245283.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:24.005Z,1505245284.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:24.400Z,1505245284.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:24.810Z,1505245284.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:25.205Z,1505245285.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:25.609Z,1505245285.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:25.996Z,1505245285.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:26.398Z,1505245286.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:26.798Z,1505245286.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:27.198Z,1505245287.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:27.608Z,1505245287.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:28.003Z,1505245288.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:28.404Z,1505245288.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:28.807Z,1505245288.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:29.209Z,1505245289.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:29.600Z,1505245289.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:29.998Z,1505245289.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:30.399Z,1505245290.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:30.799Z,1505245290.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:31.192Z,1505245291.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:31.604Z,1505245291.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:32.006Z,1505245292.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:32.398Z,1505245292.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:32.798Z,1505245292.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:33.199Z,1505245293.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:33.603Z,1505245293.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:34.005Z,1505245294.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:34.410Z,1505245294.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:34.801Z,1505245294.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:35.198Z,1505245295.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:35.599Z,1505245295.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:36.010Z,1505245296.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:36.407Z,1505245296.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:36.804Z,1505245296.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:37.200Z,1505245297.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:37.598Z,1505245297.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:37.999Z,1505245297.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:38.399Z,1505245298.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:38.807Z,1505245298.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:39.207Z,1505245299.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:39.609Z,1505245299.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:40.009Z,1505245300.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:40.411Z,1505245300.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:40.810Z,1505245300.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:41.196Z,1505245301.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:41.596Z,1505245301.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:41.997Z,1505245301.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:42.398Z,1505245302.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:42.798Z,1505245302.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:43.202Z,1505245303.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:43.613Z,1505245303.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:44.007Z,1505245304.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:44.408Z,1505245304.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:44.797Z,1505245304.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:45.210Z,1505245305.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:45.597Z,1505245305.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:45.999Z,1505245305.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:46.411Z,1505245306.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:46.809Z,1505245306.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:47.208Z,1505245307.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:47.606Z,1505245307.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:47.999Z,1505245307.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:48.408Z,1505245308.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:48.805Z,1505245308.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:49.205Z,1505245309.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:49.610Z,1505245309.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:50.018Z,1505245310.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:50.403Z,1505245310.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:50.799Z,1505245310.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:51.212Z,1505245311.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:51.604Z,1505245311.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:52.004Z,1505245312.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:52.406Z,1505245312.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:52.809Z,1505245312.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:53.210Z,1505245313.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:53.610Z,1505245313.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:53.996Z,1505245313.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:54.397Z,1505245314.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:54.810Z,1505245314.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:55.209Z,1505245315.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:55.611Z,1505245315.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:56.002Z,1505245316.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:56.396Z,1505245316.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:56.796Z,1505245316.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:57.205Z,1505245317.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:57.605Z,1505245317.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:58.002Z,1505245318.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:58.415Z,1505245318.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:58.811Z,1505245318.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:59.207Z,1505245319.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:59.612Z,1505245319.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:41:59.997Z,1505245319.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:00.398Z,1505245320.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:00.811Z,1505245320.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:01.203Z,1505245321.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:01.617Z,1505245321.617 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:35:09 
Warning battery low
CONNECT
2017-09-12T19:42:01.617Z,1505245321.617 [DAT](INFO): Got CONNECT
2017-09-12T19:42:01.618Z,1505245321.618 [DAT](INFO): entering command mode
2017-09-12T19:42:01.619Z,1505245321.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:02.004Z,1505245322.004 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:42:02.005Z,1505245322.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:02.409Z,1505245322.409 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:42:02.410Z,1505245322.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:02.812Z,1505245322.812 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:42:02.813Z,1505245322.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:03.215Z,1505245323.215 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:42:03.215Z,1505245323.215 [DAT](DEBUG): Found user prompt
2017-09-12T19:42:03.215Z,1505245323.215 [DAT](INFO): command mode acknowledged
2017-09-12T19:42:03.217Z,1505245323.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:03.617Z,1505245323.617 [DAT](INFO): setting local address to 2
2017-09-12T19:42:03.623Z,1505245323.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:04.010Z,1505245324.010 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:42:04.011Z,1505245324.011 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:42:04.011Z,1505245324.011 [DAT] Communications Fault, FailCount= 8
2017-09-12T19:42:04.011Z,1505245324.011 [DAT](ERROR): Communications Fault
2017-09-12T19:42:04.012Z,1505245324.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:04.089Z,1505245324.089 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:42:04.090Z,1505245324.090 [CBIT](CRITICAL): Communications Fault in component: DAT
2017-09-12T19:42:07.288Z,1505245327.288 [DAT](INFO): Powering down
2017-09-12T19:42:07.404Z,1505245327.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:07.517Z,1505245327.517 [CBIT](INFO): Critical error at 20170912T194204
2017-09-12T19:42:07.614Z,1505245327.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:07.961Z,1505245327.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:08.370Z,1505245328.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:08.755Z,1505245328.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:09.155Z,1505245329.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:09.556Z,1505245329.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:09.960Z,1505245329.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:10.361Z,1505245330.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:10.770Z,1505245330.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:11.155Z,1505245331.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:11.563Z,1505245331.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:11.968Z,1505245331.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:12.352Z,1505245332.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:12.761Z,1505245332.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:13.154Z,1505245333.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:13.562Z,1505245333.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:13.967Z,1505245333.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:14.367Z,1505245334.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:14.781Z,1505245334.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:15.153Z,1505245335.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:15.554Z,1505245335.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:15.969Z,1505245335.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:16.387Z,1505245336.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:16.789Z,1505245336.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:17.158Z,1505245337.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:17.563Z,1505245337.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:17.955Z,1505245337.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:18.360Z,1505245338.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:18.770Z,1505245338.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:19.196Z,1505245339.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:19.578Z,1505245339.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:19.954Z,1505245339.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:20.353Z,1505245340.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:20.778Z,1505245340.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:21.174Z,1505245341.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:21.562Z,1505245341.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:21.966Z,1505245341.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:22.367Z,1505245342.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:22.755Z,1505245342.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:23.168Z,1505245343.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:23.573Z,1505245343.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:23.970Z,1505245343.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:24.361Z,1505245344.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:24.757Z,1505245344.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:25.170Z,1505245345.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:25.562Z,1505245345.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:25.955Z,1505245345.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:26.361Z,1505245346.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:26.766Z,1505245346.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:27.168Z,1505245347.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:27.570Z,1505245347.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:27.980Z,1505245347.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:28.359Z,1505245348.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:28.757Z,1505245348.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:29.155Z,1505245349.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:29.556Z,1505245349.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:29.961Z,1505245349.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:30.365Z,1505245350.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:30.767Z,1505245350.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:42:49.575Z,1505245369.575 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:42:49.575Z,1505245369.575 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:42:49.575Z,1505245369.575 [BPC1](ERROR): Data Fault
2017-09-12T19:42:49.658Z,1505245369.658 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:42:50.823Z,1505245370.823 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:42:50.823Z,1505245370.823 [BPC1] No Fault, FailCount= 1
2017-09-12T19:45:53.492Z,1505245553.492 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:45:53.492Z,1505245553.492 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:45:53.492Z,1505245553.492 [BPC1](ERROR): Communications Fault
2017-09-12T19:45:53.581Z,1505245553.581 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:45:54.726Z,1505245554.726 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:45:54.726Z,1505245554.726 [BPC1] No Fault, FailCount= 1
2017-09-12T19:46:03.924Z,1505245563.924 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-12T19:46:03.925Z,1505245563.925 [Default:CheckIn:C.Wait] Stopped
2017-09-12T19:46:03.925Z,1505245563.925 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T19:46:03.925Z,1505245563.925 [Default:CheckIn:D] Running Loop=1
2017-09-12T19:46:04.350Z,1505245564.350 [Default:CheckIn:D] Stopped
2017-09-12T19:46:04.350Z,1505245564.350 [Default:CheckIn:E] Running Loop=1
2017-09-12T19:46:04.736Z,1505245564.736 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 44.932833 min 
2017-09-12T19:46:04.736Z,1505245564.736 [Default:CheckIn:E] Stopped
2017-09-12T19:46:04.737Z,1505245564.737 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-12T19:46:04.737Z,1505245564.737 [Default:CheckIn] Stopped
2017-09-12T19:46:04.737Z,1505245564.737 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-12T19:46:04.737Z,1505245564.737 [Default:CheckIn](INFO): Running loop #6
2017-09-12T19:46:04.737Z,1505245564.737 [Default:CheckIn] Running Loop=6
2017-09-12T19:46:04.737Z,1505245564.737 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T19:46:04.737Z,1505245564.737 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T19:46:08.428Z,1505245568.428 [NAL9602](INFO): Powering up
2017-09-12T19:46:19.347Z,1505245579.347 [NAL9602](INFO): NAL9602 initialized
2017-09-12T19:47:04.239Z,1505245624.239 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:47:04.239Z,1505245624.239 [DAT] No Fault, FailCount= 8
2017-09-12T19:47:04.565Z,1505245624.565 [DAT](INFO): Powering up
2017-09-12T19:47:04.566Z,1505245624.566 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:47:38.546Z,1505245658.546 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-12T19:47:54.453Z,1505245674.453 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:41:02 
Warning battery low
CONNECT
2017-09-12T19:47:54.453Z,1505245674.453 [DAT](INFO): Got CONNECT
2017-09-12T19:47:54.454Z,1505245674.454 [DAT](INFO): entering command mode
2017-09-12T19:47:54.846Z,1505245674.846 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:47:55.247Z,1505245675.247 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:47:55.651Z,1505245675.651 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:47:56.052Z,1505245676.052 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:47:56.052Z,1505245676.052 [DAT](DEBUG): Found user prompt
2017-09-12T19:47:56.052Z,1505245676.052 [DAT](INFO): command mode acknowledged
2017-09-12T19:47:56.453Z,1505245676.453 [DAT](INFO): setting local address to 2
2017-09-12T19:47:56.850Z,1505245676.850 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:47:56.851Z,1505245676.851 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:47:56.851Z,1505245676.851 [DAT] Communications Fault, FailCount= 1
2017-09-12T19:47:56.851Z,1505245676.851 [DAT](ERROR): Communications Fault
2017-09-12T19:47:56.930Z,1505245676.930 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:47:57.256Z,1505245677.256 [DAT](INFO): Powering down
2017-09-12T19:47:58.141Z,1505245678.141 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:47:58.141Z,1505245678.141 [DAT] No Fault, FailCount= 1
2017-09-12T19:48:00.463Z,1505245680.463 [DAT](INFO): Powering up
2017-09-12T19:48:00.463Z,1505245680.463 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:48:09.455Z,1505245689.455 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:48:09.456Z,1505245689.456 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:48:09.456Z,1505245689.456 [BPC1](ERROR): Communications Fault
2017-09-12T19:48:09.512Z,1505245689.512 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:48:10.725Z,1505245690.725 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:48:10.725Z,1505245690.725 [BPC1] No Fault, FailCount= 1
2017-09-12T19:48:18.647Z,1505245698.647 [PNI_TCM](ERROR): CRC does not match. Expected:0x5317 got:0x49216
2017-09-12T19:48:20.257Z,1505245700.257 [PNI_TCM](ERROR): CRC does not match. Expected:0x25015 got:0x28935
2017-09-12T19:48:21.840Z,1505245701.840 [PNI_TCM](ERROR): CRC does not match. Expected:0x54983 got:0x17204
2017-09-12T19:48:31.445Z,1505245711.445 [PNI_TCM](ERROR): CRC does not match. Expected:0x35239 got:0x35557
2017-09-12T19:48:44.262Z,1505245724.262 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-09-12T19:48:51.047Z,1505245731.047 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:41:58 
Warning battery low
CONNECT
2017-09-12T19:48:51.047Z,1505245731.047 [DAT](INFO): Got CONNECT
2017-09-12T19:48:51.048Z,1505245731.048 [DAT](INFO): entering command mode
2017-09-12T19:48:51.440Z,1505245731.440 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:48:51.840Z,1505245731.840 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:48:52.232Z,1505245732.232 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:48:52.632Z,1505245732.632 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:48:52.632Z,1505245732.632 [DAT](DEBUG): Found user prompt
2017-09-12T19:48:52.632Z,1505245732.632 [DAT](INFO): command mode acknowledged
2017-09-12T19:48:53.056Z,1505245733.056 [DAT](INFO): setting local address to 2
2017-09-12T19:48:53.443Z,1505245733.443 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:48:53.445Z,1505245733.445 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:48:53.445Z,1505245733.445 [DAT] Communications Fault, FailCount= 2
2017-09-12T19:48:53.445Z,1505245733.445 [DAT](ERROR): Communications Fault
2017-09-12T19:48:53.540Z,1505245733.540 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:48:53.836Z,1505245733.836 [DAT](INFO): Powering down
2017-09-12T19:48:54.699Z,1505245734.699 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:48:54.699Z,1505245734.699 [DAT] No Fault, FailCount= 2
2017-09-12T19:48:55.448Z,1505245735.448 [PNI_TCM](ERROR): CRC does not match. Expected:0x12763 got:0x74
2017-09-12T19:48:57.033Z,1505245737.033 [DAT](INFO): Powering up
2017-09-12T19:48:57.034Z,1505245737.034 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:48:57.053Z,1505245737.053 [PNI_TCM](ERROR): CRC does not match. Expected:0x16414 got:0x771
2017-09-12T19:49:46.531Z,1505245786.531 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:42:53 
Warning battery low
CONNECT
2017-09-12T19:49:46.531Z,1505245786.531 [DAT](INFO): Got CONNECT
2017-09-12T19:49:46.531Z,1505245786.531 [DAT](INFO): entering command mode
2017-09-12T19:49:46.925Z,1505245786.925 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:49:47.329Z,1505245787.329 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:49:47.719Z,1505245787.719 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:49:48.128Z,1505245788.128 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:49:48.128Z,1505245788.128 [DAT](DEBUG): Found user prompt
2017-09-12T19:49:48.128Z,1505245788.128 [DAT](INFO): command mode acknowledged
2017-09-12T19:49:48.537Z,1505245788.537 [DAT](INFO): setting local address to 2
2017-09-12T19:49:48.948Z,1505245788.948 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:49:48.949Z,1505245788.949 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:49:48.950Z,1505245788.950 [DAT] Communications Fault, FailCount= 3
2017-09-12T19:49:48.950Z,1505245788.950 [DAT](ERROR): Communications Fault
2017-09-12T19:49:49.026Z,1505245789.026 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:49:49.325Z,1505245789.325 [DAT](INFO): Powering down
2017-09-12T19:49:50.198Z,1505245790.198 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:49:50.199Z,1505245790.198 [DAT] No Fault, FailCount= 3
2017-09-12T19:49:52.516Z,1505245792.516 [DAT](INFO): Powering up
2017-09-12T19:49:52.516Z,1505245792.516 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:50:25.537Z,1505245825.537 [NAL9602](INFO): SBD MO Status=2, MOMSN=481, MT Status=2, MTMSN=0
2017-09-12T19:50:25.537Z,1505245825.537 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:50:34.778Z,1505245834.778 [BPC1](ERROR): Failed to parse message.
2017-09-12T19:50:34.779Z,1505245834.779 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:50:34.779Z,1505245834.779 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:50:34.779Z,1505245834.779 [BPC1](ERROR): Data Fault
2017-09-12T19:50:34.838Z,1505245834.838 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:50:36.035Z,1505245836.035 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:50:36.035Z,1505245836.035 [BPC1] No Fault, FailCount= 1
2017-09-12T19:50:42.354Z,1505245842.354 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:43:49 
Warning battery low
CONNECT
2017-09-12T19:50:42.354Z,1505245842.354 [DAT](INFO): Got CONNECT
2017-09-12T19:50:42.355Z,1505245842.355 [DAT](INFO): entering command mode
2017-09-12T19:50:42.740Z,1505245842.740 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:50:43.145Z,1505245843.145 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:50:43.541Z,1505245843.541 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:50:43.950Z,1505245843.950 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:50:43.950Z,1505245843.950 [DAT](DEBUG): Found user prompt
2017-09-12T19:50:43.950Z,1505245843.950 [DAT](INFO): command mode acknowledged
2017-09-12T19:50:44.355Z,1505245844.355 [DAT](INFO): setting local address to 2
2017-09-12T19:50:44.789Z,1505245844.789 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:50:44.790Z,1505245844.790 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:50:44.790Z,1505245844.790 [DAT] Communications Fault, FailCount= 4
2017-09-12T19:50:44.790Z,1505245844.790 [DAT](ERROR): Communications Fault
2017-09-12T19:50:44.908Z,1505245844.908 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:50:45.155Z,1505245845.155 [DAT](INFO): Powering down
2017-09-12T19:50:46.001Z,1505245846.001 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:50:46.002Z,1505245846.002 [DAT] No Fault, FailCount= 4
2017-09-12T19:50:48.376Z,1505245848.376 [DAT](INFO): Powering up
2017-09-12T19:50:48.376Z,1505245848.376 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:51:04.815Z,1505245864.815 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-09-12T19:46:04.7Z
2017-09-12T19:51:04.815Z,1505245864.815 [Default:CheckIn:Read_GPS] Stopped
2017-09-12T19:51:04.815Z,1505245864.815 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-12T19:51:09.442Z,1505245869.442 [DataOverHttps](INFO): Sending 91 bytes from file Logs/20170912T185724/Courier0024.lzma
2017-09-12T19:51:10.243Z,1505245870.243 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Courier0024.lzma.bak
2017-09-12T19:51:10.243Z,1505245870.243 [DataOverHttps](INFO): SBD MOMSN=5086344
2017-09-12T19:51:19.893Z,1505245879.893 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170912T185724/Express0025.lzma
2017-09-12T19:51:20.668Z,1505245880.668 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0025.lzma.bak
2017-09-12T19:51:20.669Z,1505245880.669 [DataOverHttps](INFO): SBD MOMSN=5086347
2017-09-12T19:51:21.388Z,1505245881.388 [Default:CheckIn:Read_Iridium] Stopped
2017-09-12T19:51:21.388Z,1505245881.388 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-12T19:51:21.388Z,1505245881.388 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-12T19:51:25.103Z,1505245885.103 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-12T19:51:30.462Z,1505245890.462 [NAL9602](INFO): Powering down
2017-09-12T19:51:37.675Z,1505245897.675 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:44:45 
Warning battery low
CONNECT
2017-09-12T19:51:37.675Z,1505245897.675 [DAT](INFO): Got CONNECT
2017-09-12T19:51:37.676Z,1505245897.676 [DAT](INFO): entering command mode
2017-09-12T19:51:38.074Z,1505245898.074 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:51:38.475Z,1505245898.475 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:51:38.868Z,1505245898.868 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:51:39.270Z,1505245899.270 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:51:39.270Z,1505245899.270 [DAT](DEBUG): Found user prompt
2017-09-12T19:51:39.270Z,1505245899.270 [DAT](INFO): command mode acknowledged
2017-09-12T19:51:39.673Z,1505245899.673 [DAT](INFO): setting local address to 2
2017-09-12T19:51:40.078Z,1505245900.078 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:51:40.079Z,1505245900.079 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:51:40.080Z,1505245900.080 [DAT] Communications Fault, FailCount= 5
2017-09-12T19:51:40.080Z,1505245900.080 [DAT](ERROR): Communications Fault
2017-09-12T19:51:40.156Z,1505245900.156 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:51:40.473Z,1505245900.473 [DAT](INFO): Powering down
2017-09-12T19:51:41.350Z,1505245901.350 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:51:41.350Z,1505245901.350 [DAT] No Fault, FailCount= 5
2017-09-12T19:51:43.667Z,1505245903.667 [DAT](INFO): Powering up
2017-09-12T19:51:43.668Z,1505245903.668 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:51:50.476Z,1505245910.476 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-12T19:51:50.476Z,1505245910.476 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:51:50.476Z,1505245910.476 [BPC1](ERROR): Data Fault
2017-09-12T19:51:50.532Z,1505245910.532 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:51:51.753Z,1505245911.753 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:51:51.753Z,1505245911.753 [BPC1] No Fault, FailCount= 1
2017-09-12T19:52:33.067Z,1505245953.067 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:45:40 
Warning battery low
CONNECT
2017-09-12T19:52:33.067Z,1505245953.067 [DAT](INFO): Got CONNECT
2017-09-12T19:52:33.067Z,1505245953.067 [DAT](INFO): entering command mode
2017-09-12T19:52:33.458Z,1505245953.458 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:52:33.859Z,1505245953.859 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:52:34.265Z,1505245954.265 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:52:34.675Z,1505245954.675 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:52:34.675Z,1505245954.675 [DAT](DEBUG): Found user prompt
2017-09-12T19:52:34.675Z,1505245954.675 [DAT](INFO): command mode acknowledged
2017-09-12T19:52:35.064Z,1505245955.064 [DAT](INFO): setting local address to 2
2017-09-12T19:52:35.468Z,1505245955.468 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:52:35.469Z,1505245955.469 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:52:35.469Z,1505245955.469 [DAT] Communications Fault, FailCount= 6
2017-09-12T19:52:35.469Z,1505245955.469 [DAT](ERROR): Communications Fault
2017-09-12T19:52:35.559Z,1505245955.559 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:52:35.861Z,1505245955.861 [DAT](INFO): Powering down
2017-09-12T19:52:36.751Z,1505245956.751 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:52:36.752Z,1505245956.752 [DAT] No Fault, FailCount= 6
2017-09-12T19:52:39.071Z,1505245959.071 [DAT](INFO): Powering up
2017-09-12T19:52:39.071Z,1505245959.071 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:53:28.454Z,1505246008.454 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:46:35 
Warning battery low
CONNECT
2017-09-12T19:53:28.454Z,1505246008.454 [DAT](INFO): Got CONNECT
2017-09-12T19:53:28.455Z,1505246008.455 [DAT](INFO): entering command mode
2017-09-12T19:53:28.834Z,1505246008.834 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:53:29.230Z,1505246009.230 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:53:29.643Z,1505246009.643 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:53:30.038Z,1505246010.038 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:53:30.039Z,1505246010.039 [DAT](DEBUG): Found user prompt
2017-09-12T19:53:30.039Z,1505246010.039 [DAT](INFO): command mode acknowledged
2017-09-12T19:53:30.456Z,1505246010.456 [DAT](INFO): setting local address to 2
2017-09-12T19:53:30.829Z,1505246010.829 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:53:30.830Z,1505246010.830 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:53:30.830Z,1505246010.830 [DAT] Communications Fault, FailCount= 7
2017-09-12T19:53:30.830Z,1505246010.830 [DAT](ERROR): Communications Fault
2017-09-12T19:53:30.925Z,1505246010.925 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:53:31.229Z,1505246011.229 [DAT](INFO): Powering down
2017-09-12T19:53:32.108Z,1505246012.108 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:53:32.108Z,1505246012.108 [DAT] No Fault, FailCount= 7
2017-09-12T19:53:34.455Z,1505246014.455 [DAT](INFO): Powering up
2017-09-12T19:53:34.455Z,1505246014.455 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:53:44.844Z,1505246024.844 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:53:44.844Z,1505246024.844 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:53:44.844Z,1505246024.844 [BPC1](ERROR): Data Fault
2017-09-12T19:53:44.902Z,1505246024.902 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:53:46.099Z,1505246026.099 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:53:46.099Z,1505246026.099 [BPC1] No Fault, FailCount= 1
2017-09-12T19:54:25.915Z,1505246065.915 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:47:31 
Warning battery low
CONNECT
2017-09-12T19:54:25.916Z,1505246065.916 [DAT](INFO): Got CONNECT
2017-09-12T19:54:25.916Z,1505246065.916 [DAT](INFO): entering command mode
2017-09-12T19:54:26.077Z,1505246066.077 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T19:54:26.077Z,1505246066.077 [DAT](DEBUG): Found user prompt
2017-09-12T19:54:26.077Z,1505246066.077 [DAT](INFO): command mode acknowledged
2017-09-12T19:54:26.442Z,1505246066.442 [DAT](INFO): setting local address to 2
2017-09-12T19:54:26.846Z,1505246066.846 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T19:54:26.847Z,1505246066.847 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T19:54:26.847Z,1505246066.847 [DAT] Communications Fault, FailCount= 8
2017-09-12T19:54:26.847Z,1505246066.847 [DAT](ERROR): Communications Fault
2017-09-12T19:54:26.942Z,1505246066.942 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T19:54:26.942Z,1505246066.942 [CBIT](CRITICAL): Communications Fault in component: DAT
2017-09-12T19:54:27.250Z,1505246067.250 [DAT](INFO): Powering down
2017-09-12T19:54:27.406Z,1505246067.406 [CBIT](INFO): Critical error at 20170912T195426
2017-09-12T19:54:42.458Z,1505246082.458 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-12T19:54:42.458Z,1505246082.458 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:54:42.458Z,1505246082.458 [BPC1](ERROR): Data Fault
2017-09-12T19:54:42.515Z,1505246082.515 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:54:43.716Z,1505246083.716 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:54:43.716Z,1505246083.716 [BPC1] No Fault, FailCount= 1
2017-09-12T19:55:02.855Z,1505246102.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:03.254Z,1505246103.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:03.644Z,1505246103.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:04.044Z,1505246104.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:04.449Z,1505246104.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:04.858Z,1505246104.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:05.254Z,1505246105.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:05.654Z,1505246105.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:06.055Z,1505246106.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:06.455Z,1505246106.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:06.848Z,1505246106.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:07.241Z,1505246107.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:07.642Z,1505246107.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:08.051Z,1505246108.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:08.452Z,1505246108.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:08.859Z,1505246108.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:09.254Z,1505246109.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:09.666Z,1505246109.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:10.042Z,1505246110.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:10.443Z,1505246110.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:10.848Z,1505246110.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:11.244Z,1505246111.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:11.254Z,1505246111.254 [BPC1](ERROR): Failed to parse bank A battery data
2017-09-12T19:55:11.254Z,1505246111.254 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:55:11.254Z,1505246111.254 [BPC1](ERROR): Data Fault
2017-09-12T19:55:11.337Z,1505246111.337 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:55:11.655Z,1505246111.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:12.045Z,1505246112.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:12.454Z,1505246112.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:12.514Z,1505246112.514 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:55:12.514Z,1505246112.514 [BPC1] No Fault, FailCount= 1
2017-09-12T19:55:12.853Z,1505246112.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:13.254Z,1505246113.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:13.654Z,1505246113.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:14.057Z,1505246114.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:14.441Z,1505246114.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:14.842Z,1505246114.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:15.242Z,1505246115.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:15.651Z,1505246115.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:16.052Z,1505246116.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:16.459Z,1505246116.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:16.853Z,1505246116.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:17.252Z,1505246117.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:17.649Z,1505246117.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:18.043Z,1505246118.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:18.443Z,1505246118.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:18.870Z,1505246118.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:19.240Z,1505246119.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:19.645Z,1505246119.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:20.051Z,1505246120.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:20.457Z,1505246120.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:20.847Z,1505246120.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:21.260Z,1505246121.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:21.663Z,1505246121.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:22.041Z,1505246122.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:22.455Z,1505246122.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:25.995Z,1505246125.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:26.178Z,1505246126.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:26.551Z,1505246126.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:26.953Z,1505246126.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:27.358Z,1505246127.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:27.734Z,1505246127.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:28.135Z,1505246128.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:28.543Z,1505246128.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:28.936Z,1505246128.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:29.344Z,1505246129.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:29.746Z,1505246129.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:30.145Z,1505246130.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:30.545Z,1505246130.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:30.945Z,1505246130.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:31.346Z,1505246131.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:31.736Z,1505246131.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:32.162Z,1505246132.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:32.533Z,1505246132.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:32.934Z,1505246132.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:33.343Z,1505246133.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:33.744Z,1505246133.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:34.143Z,1505246134.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:34.540Z,1505246134.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:34.950Z,1505246134.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:35.334Z,1505246135.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:35.735Z,1505246135.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:36.144Z,1505246136.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:36.540Z,1505246136.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:36.948Z,1505246136.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:37.350Z,1505246137.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:37.734Z,1505246137.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:38.135Z,1505246138.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:38.535Z,1505246138.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:38.945Z,1505246138.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:39.349Z,1505246139.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:39.749Z,1505246139.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:40.151Z,1505246140.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:40.551Z,1505246140.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:40.946Z,1505246140.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:41.354Z,1505246141.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:41.737Z,1505246141.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:42.141Z,1505246142.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:42.552Z,1505246142.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:42.941Z,1505246142.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:43.335Z,1505246143.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:43.356Z,1505246143.356 [BPC1](ERROR): Failed to receive battery data
2017-09-12T19:55:43.356Z,1505246143.356 [BPC1] Communications Fault, FailCount= 1
2017-09-12T19:55:43.356Z,1505246143.356 [BPC1](ERROR): Communications Fault
2017-09-12T19:55:43.424Z,1505246143.424 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T19:55:43.749Z,1505246143.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:44.144Z,1505246144.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:44.544Z,1505246144.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:44.604Z,1505246144.604 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:55:44.604Z,1505246144.604 [BPC1] No Fault, FailCount= 1
2017-09-12T19:55:44.944Z,1505246144.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:45.346Z,1505246145.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:45.747Z,1505246145.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:46.147Z,1505246146.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:46.547Z,1505246146.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:46.936Z,1505246146.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:47.337Z,1505246147.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:47.742Z,1505246147.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:48.149Z,1505246148.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:48.546Z,1505246148.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:48.946Z,1505246148.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:49.347Z,1505246149.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:49.735Z,1505246149.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:50.137Z,1505246150.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:50.541Z,1505246150.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:50.945Z,1505246150.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:51.346Z,1505246151.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:51.747Z,1505246151.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:52.147Z,1505246152.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:52.535Z,1505246152.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:52.934Z,1505246152.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:53.334Z,1505246153.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:53.744Z,1505246153.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:54.155Z,1505246154.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:54.560Z,1505246154.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:54.948Z,1505246154.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:55.359Z,1505246155.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:55.734Z,1505246155.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:56.135Z,1505246156.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:56.543Z,1505246156.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:56.948Z,1505246156.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:57.341Z,1505246157.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:57.748Z,1505246157.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:58.145Z,1505246158.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:58.547Z,1505246158.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:58.935Z,1505246158.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:59.344Z,1505246159.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:55:59.744Z,1505246159.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:00.146Z,1505246160.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:00.544Z,1505246160.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:00.945Z,1505246160.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:01.346Z,1505246161.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:01.748Z,1505246161.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:02.150Z,1505246162.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:02.537Z,1505246162.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:02.938Z,1505246162.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:03.345Z,1505246163.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:03.743Z,1505246163.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:04.148Z,1505246164.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:04.547Z,1505246164.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:04.952Z,1505246164.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:05.354Z,1505246165.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:05.734Z,1505246165.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:06.143Z,1505246166.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:06.535Z,1505246166.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:06.944Z,1505246166.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:07.346Z,1505246167.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:07.748Z,1505246167.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:08.141Z,1505246168.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:08.550Z,1505246168.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:08.956Z,1505246168.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:09.359Z,1505246169.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:09.757Z,1505246169.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:10.137Z,1505246170.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:10.534Z,1505246170.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:10.939Z,1505246170.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:11.346Z,1505246171.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:11.747Z,1505246171.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:12.148Z,1505246172.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:12.544Z,1505246172.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:12.945Z,1505246172.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:13.355Z,1505246173.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:13.735Z,1505246173.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:14.136Z,1505246174.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:14.540Z,1505246174.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:14.937Z,1505246174.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:15.350Z,1505246175.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:15.750Z,1505246175.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:16.147Z,1505246176.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:16.535Z,1505246176.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:16.944Z,1505246176.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:17.337Z,1505246177.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:17.751Z,1505246177.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:18.144Z,1505246178.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:18.546Z,1505246178.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:18.943Z,1505246178.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:19.347Z,1505246179.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:19.748Z,1505246179.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:20.149Z,1505246180.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:20.548Z,1505246180.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:20.934Z,1505246180.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:21.335Z,1505246181.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:21.735Z,1505246181.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:21.780Z,1505246181.780 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-12T19:56:21.780Z,1505246181.780 [Default:CheckIn:C.Wait] Stopped
2017-09-12T19:56:21.780Z,1505246181.780 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T19:56:21.780Z,1505246181.780 [Default:CheckIn:D] Running Loop=1
2017-09-12T19:56:22.141Z,1505246182.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:22.185Z,1505246182.185 [Default:CheckIn:D] Stopped
2017-09-12T19:56:22.185Z,1505246182.185 [Default:CheckIn:E] Running Loop=1
2017-09-12T19:56:22.551Z,1505246182.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:22.592Z,1505246182.592 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 55.230070 min 
2017-09-12T19:56:22.592Z,1505246182.592 [Default:CheckIn:E] Stopped
2017-09-12T19:56:22.593Z,1505246182.593 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-12T19:56:22.593Z,1505246182.593 [Default:CheckIn] Stopped
2017-09-12T19:56:22.593Z,1505246182.593 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-12T19:56:22.593Z,1505246182.593 [Default:CheckIn](INFO): Running loop #7
2017-09-12T19:56:22.593Z,1505246182.593 [Default:CheckIn] Running Loop=7
2017-09-12T19:56:22.593Z,1505246182.593 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T19:56:22.593Z,1505246182.593 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T19:56:25.847Z,1505246185.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:25.983Z,1505246185.983 [NAL9602](INFO): Powering up
2017-09-12T19:56:26.006Z,1505246186.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:26.391Z,1505246186.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:26.804Z,1505246186.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:27.199Z,1505246187.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:27.606Z,1505246187.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:28.005Z,1505246188.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:28.401Z,1505246188.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:28.800Z,1505246188.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:29.214Z,1505246189.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:29.597Z,1505246189.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:30.013Z,1505246190.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:30.400Z,1505246190.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:30.805Z,1505246190.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:31.190Z,1505246191.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:31.591Z,1505246191.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:32.004Z,1505246192.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:32.405Z,1505246192.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:32.814Z,1505246192.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:33.209Z,1505246193.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:33.605Z,1505246193.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:34.010Z,1505246194.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:34.391Z,1505246194.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:34.824Z,1505246194.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:35.215Z,1505246195.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:35.597Z,1505246195.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:36.006Z,1505246196.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:36.433Z,1505246196.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:36.838Z,1505246196.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:37.176Z,1505246197.176 [NAL9602](INFO): NAL9602 initialized
2017-09-12T19:56:37.193Z,1505246197.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:37.599Z,1505246197.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:37.973Z,1505246197.973 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-09-12T19:56:37.973Z,1505246197.973 [NAL9602] Data Fault, FailCount= 1
2017-09-12T19:56:37.973Z,1505246197.973 [NAL9602](ERROR): Data Fault
2017-09-12T19:56:37.991Z,1505246197.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:38.085Z,1505246198.085 [CBIT](ERROR): Data Fault in component: NAL9602
2017-09-12T19:56:38.373Z,1505246198.373 [NAL9602](INFO): Powering down
2017-09-12T19:56:38.391Z,1505246198.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:38.817Z,1505246198.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:39.202Z,1505246199.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:39.277Z,1505246199.277 [CBIT](INFO): Clearing failed state for component NAL9602
2017-09-12T19:56:39.277Z,1505246199.277 [NAL9602] No Fault, FailCount= 1
2017-09-12T19:56:39.593Z,1505246199.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:40.007Z,1505246200.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:40.412Z,1505246200.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:40.808Z,1505246200.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:41.190Z,1505246201.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:41.591Z,1505246201.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:42.001Z,1505246202.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:42.402Z,1505246202.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:42.799Z,1505246202.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:43.197Z,1505246203.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:43.574Z,1505246203.574 [NAL9602](INFO): Powering up NAL9602
2017-09-12T19:56:43.591Z,1505246203.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:43.990Z,1505246203.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:44.391Z,1505246204.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:44.792Z,1505246204.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:45.195Z,1505246205.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:45.603Z,1505246205.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:45.999Z,1505246205.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:46.404Z,1505246206.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:46.806Z,1505246206.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:47.207Z,1505246207.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:47.615Z,1505246207.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:47.989Z,1505246207.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:48.404Z,1505246208.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:48.799Z,1505246208.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:49.207Z,1505246209.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:49.609Z,1505246209.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:50.009Z,1505246210.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:50.395Z,1505246210.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:50.797Z,1505246210.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:51.210Z,1505246211.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:51.625Z,1505246211.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:52.030Z,1505246212.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:52.402Z,1505246212.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:52.812Z,1505246212.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:53.189Z,1505246213.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:53.590Z,1505246213.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:54.012Z,1505246214.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:54.418Z,1505246214.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:54.783Z,1505246214.783 [NAL9602](INFO): NAL9602 initialized
2017-09-12T19:56:54.822Z,1505246214.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:55.198Z,1505246215.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:55.606Z,1505246215.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:56.012Z,1505246216.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:56.413Z,1505246216.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:56.801Z,1505246216.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:57.210Z,1505246217.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:57.611Z,1505246217.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:58.011Z,1505246218.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:58.410Z,1505246218.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:58.805Z,1505246218.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:59.212Z,1505246219.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:59.626Z,1505246219.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:56:59.992Z,1505246219.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:00.404Z,1505246220.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:00.808Z,1505246220.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:01.207Z,1505246221.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:01.596Z,1505246221.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:02.009Z,1505246222.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:02.396Z,1505246222.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:02.798Z,1505246222.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:03.206Z,1505246223.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:03.617Z,1505246223.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:04.014Z,1505246224.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:04.402Z,1505246224.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:04.854Z,1505246224.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:05.194Z,1505246225.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:05.604Z,1505246225.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:06.013Z,1505246226.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:06.414Z,1505246226.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:06.832Z,1505246226.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:07.208Z,1505246227.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:07.606Z,1505246227.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:07.997Z,1505246227.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:08.390Z,1505246228.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:08.791Z,1505246228.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:09.192Z,1505246229.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:09.596Z,1505246229.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:10.002Z,1505246230.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:10.401Z,1505246230.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:10.802Z,1505246230.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:11.198Z,1505246231.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:11.598Z,1505246231.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:11.998Z,1505246231.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:12.412Z,1505246232.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:12.811Z,1505246232.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:13.217Z,1505246233.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:13.590Z,1505246233.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:13.990Z,1505246233.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:14.395Z,1505246234.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:14.797Z,1505246234.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:15.203Z,1505246235.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:15.610Z,1505246235.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:15.998Z,1505246235.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:16.413Z,1505246236.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:16.831Z,1505246236.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:17.207Z,1505246237.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:17.594Z,1505246237.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:17.999Z,1505246237.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:18.399Z,1505246238.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:18.803Z,1505246238.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:19.193Z,1505246239.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:19.598Z,1505246239.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:20.009Z,1505246240.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:20.411Z,1505246240.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:20.823Z,1505246240.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:21.214Z,1505246241.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:21.591Z,1505246241.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:22.007Z,1505246242.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:22.401Z,1505246242.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:22.812Z,1505246242.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:28.536Z,1505246248.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:28.705Z,1505246248.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:29.088Z,1505246249.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:29.494Z,1505246249.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:29.875Z,1505246249.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:30.279Z,1505246250.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:30.665Z,1505246250.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:31.087Z,1505246251.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:31.485Z,1505246251.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:31.865Z,1505246251.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:32.288Z,1505246252.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:32.669Z,1505246252.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:33.094Z,1505246253.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:33.474Z,1505246253.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:33.876Z,1505246253.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:34.263Z,1505246254.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:34.663Z,1505246254.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:35.065Z,1505246255.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:35.464Z,1505246255.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:35.872Z,1505246255.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:36.262Z,1505246256.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:36.677Z,1505246256.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:37.085Z,1505246257.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:37.472Z,1505246257.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:37.867Z,1505246257.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:38.269Z,1505246258.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:38.675Z,1505246258.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:38.737Z,1505246258.737 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-12T19:57:39.062Z,1505246259.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:39.471Z,1505246259.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:39.867Z,1505246259.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:40.265Z,1505246260.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:40.676Z,1505246260.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:41.069Z,1505246261.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:41.473Z,1505246261.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:41.865Z,1505246261.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:42.274Z,1505246262.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:42.664Z,1505246262.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:43.073Z,1505246263.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:43.473Z,1505246263.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:43.862Z,1505246263.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:44.262Z,1505246264.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:44.679Z,1505246264.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:45.081Z,1505246265.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:45.474Z,1505246265.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:45.870Z,1505246265.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:46.271Z,1505246266.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:46.674Z,1505246266.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:47.071Z,1505246267.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:47.475Z,1505246267.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:47.878Z,1505246267.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:48.272Z,1505246268.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:48.662Z,1505246268.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:49.062Z,1505246269.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:49.485Z,1505246269.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:49.882Z,1505246269.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:50.274Z,1505246270.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:50.680Z,1505246270.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:51.069Z,1505246271.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:51.463Z,1505246271.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:51.871Z,1505246271.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:52.270Z,1505246272.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:52.673Z,1505246272.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:53.077Z,1505246273.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:53.465Z,1505246273.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:53.884Z,1505246273.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:54.293Z,1505246274.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:54.664Z,1505246274.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:55.063Z,1505246275.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:55.473Z,1505246275.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:55.872Z,1505246275.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:56.276Z,1505246276.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:56.685Z,1505246276.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:57.063Z,1505246277.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:57.476Z,1505246277.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:57.876Z,1505246277.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:58.283Z,1505246278.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:58.683Z,1505246278.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:59.073Z,1505246279.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:59.468Z,1505246279.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:57:59.876Z,1505246279.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:00.266Z,1505246280.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:00.683Z,1505246280.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:01.070Z,1505246281.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:01.473Z,1505246281.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:01.865Z,1505246281.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:02.264Z,1505246282.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:02.672Z,1505246282.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:03.073Z,1505246283.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:03.474Z,1505246283.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:03.877Z,1505246283.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:04.268Z,1505246284.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:04.673Z,1505246284.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:05.066Z,1505246285.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:05.465Z,1505246285.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:05.870Z,1505246285.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:06.271Z,1505246286.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:06.677Z,1505246286.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:07.088Z,1505246287.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:07.472Z,1505246287.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:07.864Z,1505246287.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:08.268Z,1505246288.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:08.674Z,1505246288.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:09.068Z,1505246289.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:09.473Z,1505246289.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:09.874Z,1505246289.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:10.275Z,1505246290.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:10.677Z,1505246290.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:11.061Z,1505246291.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:11.462Z,1505246291.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:11.863Z,1505246291.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:12.271Z,1505246292.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:12.671Z,1505246292.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:13.075Z,1505246293.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:13.476Z,1505246293.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:13.865Z,1505246293.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:14.278Z,1505246294.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:14.662Z,1505246294.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:15.065Z,1505246295.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:15.465Z,1505246295.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:15.878Z,1505246295.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:16.283Z,1505246296.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:16.672Z,1505246296.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:17.074Z,1505246297.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:17.465Z,1505246297.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:17.871Z,1505246297.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:18.271Z,1505246298.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:18.663Z,1505246298.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:19.061Z,1505246299.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:19.470Z,1505246299.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:19.885Z,1505246299.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:20.290Z,1505246300.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:20.673Z,1505246300.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:21.080Z,1505246301.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:21.483Z,1505246301.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:21.876Z,1505246301.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:22.263Z,1505246302.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:22.663Z,1505246302.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:23.071Z,1505246303.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:26.351Z,1505246306.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:26.548Z,1505246306.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:26.920Z,1505246306.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:27.338Z,1505246307.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:27.715Z,1505246307.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:28.117Z,1505246308.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:28.517Z,1505246308.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:28.918Z,1505246308.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:29.318Z,1505246309.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:29.728Z,1505246309.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:30.127Z,1505246310.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:30.526Z,1505246310.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:30.916Z,1505246310.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:31.317Z,1505246311.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:31.717Z,1505246311.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:32.125Z,1505246312.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:32.518Z,1505246312.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:32.937Z,1505246312.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:33.334Z,1505246313.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:33.727Z,1505246313.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:34.128Z,1505246314.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:34.526Z,1505246314.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:34.929Z,1505246314.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:35.323Z,1505246315.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:35.716Z,1505246315.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:36.116Z,1505246316.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:36.524Z,1505246316.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:36.926Z,1505246316.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:37.336Z,1505246317.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:37.726Z,1505246317.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:38.119Z,1505246318.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:38.520Z,1505246318.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:38.943Z,1505246318.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:39.317Z,1505246319.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:39.718Z,1505246319.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:40.127Z,1505246320.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:40.524Z,1505246320.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:40.926Z,1505246320.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:41.327Z,1505246321.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:41.721Z,1505246321.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:42.118Z,1505246322.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:42.519Z,1505246322.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:42.923Z,1505246322.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:43.323Z,1505246323.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:43.724Z,1505246323.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:44.122Z,1505246324.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:44.525Z,1505246324.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:44.926Z,1505246324.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:45.315Z,1505246325.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:45.715Z,1505246325.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:46.116Z,1505246326.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:46.517Z,1505246326.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:46.921Z,1505246326.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:47.326Z,1505246327.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:47.722Z,1505246327.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:48.126Z,1505246328.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:48.526Z,1505246328.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:48.938Z,1505246328.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:49.317Z,1505246329.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:49.718Z,1505246329.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:50.127Z,1505246330.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:50.519Z,1505246330.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:50.923Z,1505246330.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:51.332Z,1505246331.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:51.732Z,1505246331.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:52.128Z,1505246332.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:52.537Z,1505246332.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:52.915Z,1505246332.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:53.316Z,1505246333.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:53.716Z,1505246333.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:54.124Z,1505246334.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:54.525Z,1505246334.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:54.929Z,1505246334.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:55.329Z,1505246335.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:55.700Z,1505246335.700 [NAL9602](INFO): SBD MO Status=2, MOMSN=481, MT Status=2, MTMSN=0
2017-09-12T19:58:55.700Z,1505246335.700 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T19:58:55.728Z,1505246335.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:56.141Z,1505246336.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:56.528Z,1505246336.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:56.917Z,1505246336.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:57.339Z,1505246337.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:57.718Z,1505246337.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:58.124Z,1505246338.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:58.528Z,1505246338.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:58.928Z,1505246338.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:59.333Z,1505246339.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:58:59.720Z,1505246339.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:00.145Z,1505246340.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:00.541Z,1505246340.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:00.920Z,1505246340.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:01.328Z,1505246341.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:01.729Z,1505246341.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:02.132Z,1505246342.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:02.519Z,1505246342.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:02.920Z,1505246342.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:03.324Z,1505246343.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:03.724Z,1505246343.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:04.129Z,1505246344.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:04.537Z,1505246344.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:04.944Z,1505246344.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:05.341Z,1505246345.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:05.715Z,1505246345.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:06.116Z,1505246346.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:06.524Z,1505246346.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:06.926Z,1505246346.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:07.329Z,1505246347.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:07.730Z,1505246347.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:08.118Z,1505246348.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:08.515Z,1505246348.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:08.532Z,1505246348.532 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-12T19:59:08.533Z,1505246348.533 [BPC1] Data Fault, FailCount= 1
2017-09-12T19:59:08.533Z,1505246348.533 [BPC1](ERROR): Data Fault
2017-09-12T19:59:08.609Z,1505246348.609 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T19:59:08.937Z,1505246348.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:09.335Z,1505246349.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:09.725Z,1505246349.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:09.778Z,1505246349.778 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T19:59:09.778Z,1505246349.778 [BPC1] No Fault, FailCount= 1
2017-09-12T19:59:10.118Z,1505246350.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:10.519Z,1505246350.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:10.926Z,1505246350.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:11.334Z,1505246351.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:11.728Z,1505246351.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:12.136Z,1505246352.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:12.538Z,1505246352.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:12.925Z,1505246352.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:13.315Z,1505246353.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:13.716Z,1505246353.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:14.121Z,1505246354.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:14.541Z,1505246354.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:14.929Z,1505246354.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:15.325Z,1505246355.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:15.715Z,1505246355.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:16.116Z,1505246356.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:16.517Z,1505246356.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:16.929Z,1505246356.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:17.317Z,1505246357.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:17.727Z,1505246357.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:18.130Z,1505246358.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:18.530Z,1505246358.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:18.928Z,1505246358.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:19.337Z,1505246359.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:19.717Z,1505246359.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:20.136Z,1505246360.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:20.550Z,1505246360.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:20.926Z,1505246360.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:21.327Z,1505246361.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:21.724Z,1505246361.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:22.131Z,1505246362.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:22.537Z,1505246362.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:22.938Z,1505246362.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:23.320Z,1505246363.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:26.606Z,1505246366.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:26.800Z,1505246366.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:26.862Z,1505246366.862 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T19:59:26.866Z,1505246366.866 [DAT] No Fault, FailCount= 8
2017-09-12T19:59:27.164Z,1505246367.164 [DAT](INFO): Powering up
2017-09-12T19:59:27.165Z,1505246367.165 [DAT](DEBUG): Initializing DAT.
2017-09-12T19:59:27.183Z,1505246367.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:27.576Z,1505246367.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:27.974Z,1505246367.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:28.352Z,1505246368.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:28.762Z,1505246368.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:29.181Z,1505246369.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:29.562Z,1505246369.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:29.957Z,1505246369.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:30.363Z,1505246370.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:30.752Z,1505246370.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:31.152Z,1505246371.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:31.560Z,1505246371.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:31.961Z,1505246371.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:32.355Z,1505246372.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:32.769Z,1505246372.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:33.176Z,1505246373.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:33.548Z,1505246373.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:33.957Z,1505246373.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:34.357Z,1505246374.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:34.798Z,1505246374.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:35.159Z,1505246375.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:35.567Z,1505246375.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:35.956Z,1505246375.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:36.372Z,1505246376.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:36.767Z,1505246376.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:37.180Z,1505246377.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:37.574Z,1505246377.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:37.974Z,1505246377.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:38.359Z,1505246378.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:38.792Z,1505246378.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:39.160Z,1505246379.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:39.565Z,1505246379.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:39.976Z,1505246379.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:40.379Z,1505246380.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:40.768Z,1505246380.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:41.173Z,1505246381.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:41.571Z,1505246381.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:41.949Z,1505246381.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:42.378Z,1505246382.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:42.750Z,1505246382.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:43.151Z,1505246383.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:43.563Z,1505246383.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:43.964Z,1505246383.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:44.361Z,1505246384.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:44.761Z,1505246384.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:45.161Z,1505246385.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:45.561Z,1505246385.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:45.982Z,1505246385.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:46.372Z,1505246386.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:46.757Z,1505246386.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:47.153Z,1505246387.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:47.554Z,1505246387.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:47.962Z,1505246387.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:48.363Z,1505246388.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:48.764Z,1505246388.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:49.152Z,1505246389.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:49.571Z,1505246389.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:49.950Z,1505246389.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:50.386Z,1505246390.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:50.770Z,1505246390.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:51.168Z,1505246391.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:51.588Z,1505246391.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:51.966Z,1505246391.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:52.378Z,1505246392.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:52.772Z,1505246392.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:53.157Z,1505246393.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:53.567Z,1505246393.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:53.948Z,1505246393.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:54.362Z,1505246394.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:54.765Z,1505246394.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:55.170Z,1505246395.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:55.591Z,1505246395.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:55.958Z,1505246395.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:56.374Z,1505246396.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:56.777Z,1505246396.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:57.216Z,1505246397.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:57.562Z,1505246397.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:57.950Z,1505246397.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:58.383Z,1505246398.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:58.778Z,1505246398.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:59.166Z,1505246399.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:59.561Z,1505246399.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T19:59:59.956Z,1505246399.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:00.362Z,1505246400.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:00.776Z,1505246400.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:01.146Z,1505246401.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:01.552Z,1505246401.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:01.953Z,1505246401.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:02.357Z,1505246402.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:02.762Z,1505246402.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:03.177Z,1505246403.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:03.563Z,1505246403.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:03.960Z,1505246403.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:04.360Z,1505246404.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:04.762Z,1505246404.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:05.150Z,1505246405.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:05.579Z,1505246405.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:05.964Z,1505246405.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:06.360Z,1505246406.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:06.761Z,1505246406.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:07.161Z,1505246407.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:07.552Z,1505246407.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:07.973Z,1505246407.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:08.394Z,1505246408.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:08.747Z,1505246408.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:09.162Z,1505246409.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:09.567Z,1505246409.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:09.956Z,1505246409.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:10.359Z,1505246410.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:10.754Z,1505246410.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:11.147Z,1505246411.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:11.548Z,1505246411.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:11.971Z,1505246411.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:12.359Z,1505246412.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:12.761Z,1505246412.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:13.157Z,1505246413.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:13.563Z,1505246413.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:13.973Z,1505246413.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:14.353Z,1505246414.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:14.761Z,1505246414.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:15.165Z,1505246415.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:15.549Z,1505246415.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:15.951Z,1505246415.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:16.352Z,1505246416.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:16.753Z,1505246416.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:17.155Z,1505246417.155 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:53:24 
Warning battery low
CONNECT
2017-09-12T20:00:17.156Z,1505246417.156 [DAT](INFO): Got CONNECT
2017-09-12T20:00:17.156Z,1505246417.156 [DAT](INFO): entering command mode
2017-09-12T20:00:17.158Z,1505246417.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:17.563Z,1505246417.563 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:00:17.564Z,1505246417.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:17.962Z,1505246417.962 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:00:17.963Z,1505246417.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:18.349Z,1505246418.349 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:00:18.351Z,1505246418.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:18.747Z,1505246418.747 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:00:18.747Z,1505246418.747 [DAT](DEBUG): Found user prompt
2017-09-12T20:00:18.747Z,1505246418.747 [DAT](INFO): command mode acknowledged
2017-09-12T20:00:18.748Z,1505246418.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:19.151Z,1505246419.151 [DAT](INFO): setting local address to 2
2017-09-12T20:00:19.158Z,1505246419.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:19.556Z,1505246419.556 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:00:19.557Z,1505246419.557 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:00:19.557Z,1505246419.557 [DAT] Communications Fault, FailCount= 1
2017-09-12T20:00:19.557Z,1505246419.557 [DAT](ERROR): Communications Fault
2017-09-12T20:00:19.559Z,1505246419.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:19.636Z,1505246419.636 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:00:19.951Z,1505246419.951 [DAT](INFO): Powering down
2017-09-12T20:00:20.071Z,1505246420.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:20.375Z,1505246420.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:20.780Z,1505246420.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:20.858Z,1505246420.858 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:00:20.858Z,1505246420.858 [DAT] No Fault, FailCount= 1
2017-09-12T20:00:21.159Z,1505246421.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:21.556Z,1505246421.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:21.956Z,1505246421.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:22.360Z,1505246422.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:22.752Z,1505246422.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:23.161Z,1505246423.161 [DAT](INFO): Powering up
2017-09-12T20:00:23.161Z,1505246423.161 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:00:23.176Z,1505246423.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:23.577Z,1505246423.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:27.095Z,1505246427.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:27.280Z,1505246427.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:27.645Z,1505246427.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:28.046Z,1505246428.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:28.448Z,1505246428.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:28.827Z,1505246428.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:29.250Z,1505246429.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:29.655Z,1505246429.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:30.035Z,1505246430.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:30.426Z,1505246430.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:30.869Z,1505246430.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:31.249Z,1505246431.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:31.637Z,1505246431.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:32.044Z,1505246432.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:32.439Z,1505246432.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:32.836Z,1505246432.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:33.246Z,1505246433.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:33.627Z,1505246433.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:34.028Z,1505246434.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:34.428Z,1505246434.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:34.837Z,1505246434.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:35.234Z,1505246435.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:35.643Z,1505246435.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:36.043Z,1505246436.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:36.435Z,1505246436.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:36.837Z,1505246436.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:37.230Z,1505246437.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:37.639Z,1505246437.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:38.030Z,1505246438.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:38.436Z,1505246438.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:38.839Z,1505246438.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:39.247Z,1505246439.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:39.651Z,1505246439.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:40.031Z,1505246440.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:40.429Z,1505246440.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:40.830Z,1505246440.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:41.231Z,1505246441.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:41.636Z,1505246441.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:42.043Z,1505246442.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:42.433Z,1505246442.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:42.841Z,1505246442.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:43.226Z,1505246443.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:43.645Z,1505246443.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:44.041Z,1505246444.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:44.440Z,1505246444.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:44.832Z,1505246444.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:45.239Z,1505246445.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:45.626Z,1505246445.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:46.027Z,1505246446.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:46.439Z,1505246446.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:46.838Z,1505246446.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:47.227Z,1505246447.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:47.640Z,1505246447.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:48.041Z,1505246448.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:48.426Z,1505246448.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:48.834Z,1505246448.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:49.236Z,1505246449.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:49.643Z,1505246449.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:50.044Z,1505246450.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:50.436Z,1505246450.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:50.826Z,1505246450.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:51.235Z,1505246451.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:51.635Z,1505246451.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:52.039Z,1505246452.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:52.443Z,1505246452.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:52.851Z,1505246452.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:53.226Z,1505246453.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:53.626Z,1505246453.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:54.027Z,1505246454.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:54.428Z,1505246454.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:54.828Z,1505246454.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:55.238Z,1505246455.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:55.637Z,1505246455.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:56.034Z,1505246456.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:56.438Z,1505246456.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:56.846Z,1505246456.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:57.244Z,1505246457.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:57.644Z,1505246457.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:58.036Z,1505246458.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:58.446Z,1505246458.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:58.827Z,1505246458.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:59.234Z,1505246459.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:00:59.639Z,1505246459.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:00.031Z,1505246460.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:00.432Z,1505246460.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:00.852Z,1505246460.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:01.261Z,1505246461.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:01.634Z,1505246461.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:02.032Z,1505246462.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:02.429Z,1505246462.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:02.829Z,1505246462.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:03.229Z,1505246463.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:03.635Z,1505246463.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:04.030Z,1505246464.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:04.439Z,1505246464.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:04.837Z,1505246464.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:05.243Z,1505246465.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:05.644Z,1505246465.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:06.026Z,1505246466.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:06.427Z,1505246466.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:06.839Z,1505246466.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:07.244Z,1505246467.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:07.644Z,1505246467.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:08.046Z,1505246468.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:08.448Z,1505246468.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:08.826Z,1505246468.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:09.227Z,1505246469.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:09.654Z,1505246469.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:10.051Z,1505246470.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:10.449Z,1505246470.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:10.853Z,1505246470.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:11.227Z,1505246471.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:11.652Z,1505246471.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:12.029Z,1505246472.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:12.460Z,1505246472.460 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:54:20 
Warning battery low
CONNECT
2017-09-12T20:01:12.460Z,1505246472.460 [DAT](INFO): Got CONNECT
2017-09-12T20:01:12.461Z,1505246472.461 [DAT](INFO): entering command mode
2017-09-12T20:01:12.463Z,1505246472.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:12.841Z,1505246472.841 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:01:12.842Z,1505246472.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:13.239Z,1505246473.239 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:01:13.240Z,1505246473.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:13.634Z,1505246473.634 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:01:13.635Z,1505246473.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:14.036Z,1505246474.036 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:01:14.036Z,1505246474.036 [DAT](DEBUG): Found user prompt
2017-09-12T20:01:14.036Z,1505246474.036 [DAT](INFO): command mode acknowledged
2017-09-12T20:01:14.037Z,1505246474.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:14.438Z,1505246474.438 [DAT](INFO): setting local address to 2
2017-09-12T20:01:14.443Z,1505246474.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:14.846Z,1505246474.846 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:01:14.847Z,1505246474.847 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:01:14.847Z,1505246474.847 [DAT] Communications Fault, FailCount= 2
2017-09-12T20:01:14.847Z,1505246474.847 [DAT](ERROR): Communications Fault
2017-09-12T20:01:14.848Z,1505246474.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:14.969Z,1505246474.969 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:01:15.244Z,1505246475.244 [DAT](INFO): Powering down
2017-09-12T20:01:15.363Z,1505246475.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:15.648Z,1505246475.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:16.056Z,1505246476.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:16.127Z,1505246476.127 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:01:16.127Z,1505246476.127 [DAT] No Fault, FailCount= 2
2017-09-12T20:01:16.426Z,1505246476.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:16.827Z,1505246476.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:17.228Z,1505246477.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:17.628Z,1505246477.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:18.029Z,1505246478.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:18.440Z,1505246478.440 [DAT](INFO): Powering up
2017-09-12T20:01:18.440Z,1505246478.440 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:01:18.463Z,1505246478.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:18.829Z,1505246478.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:19.249Z,1505246479.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:19.657Z,1505246479.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:20.055Z,1505246480.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:20.471Z,1505246480.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:20.852Z,1505246480.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:21.234Z,1505246481.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:21.652Z,1505246481.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:22.030Z,1505246482.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:22.440Z,1505246482.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:22.829Z,1505246482.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:22.932Z,1505246482.932 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-09-12T19:56:22.6Z
2017-09-12T20:01:22.932Z,1505246482.932 [Default:CheckIn:Read_GPS] Stopped
2017-09-12T20:01:22.932Z,1505246482.932 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-12T20:01:23.234Z,1505246483.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:23.788Z,1505246483.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:26.913Z,1505246486.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:27.045Z,1505246487.045 [DataOverHttps](INFO): Sending 91 bytes from file Logs/20170912T185724/Courier0028.lzma
2017-09-12T20:01:27.095Z,1505246487.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:27.463Z,1505246487.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:27.808Z,1505246487.808 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Courier0028.lzma.bak
2017-09-12T20:01:27.808Z,1505246487.808 [DataOverHttps](INFO): SBD MOMSN=5086350
2017-09-12T20:01:27.858Z,1505246487.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:28.517Z,1505246488.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:28.646Z,1505246488.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:32.183Z,1505246492.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:32.189Z,1505246492.189 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-12T20:01:32.190Z,1505246492.190 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-12T20:01:32.190Z,1505246492.190 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-12T20:01:32.191Z,1505246492.191 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-12T20:01:32.191Z,1505246492.191 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-12T20:01:32.191Z,1505246492.191 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-12T20:01:32.192Z,1505246492.192 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-12T20:01:32.192Z,1505246492.192 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-09-12T20:01:32.359Z,1505246492.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:32.758Z,1505246492.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:33.169Z,1505246493.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:33.534Z,1505246493.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:33.944Z,1505246493.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:37.449Z,1505246497.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:37.547Z,1505246497.547 [DataOverHttps](INFO): Sending 215 bytes from file Logs/20170912T185724/Express0029.lzma
2017-09-12T20:01:37.587Z,1505246497.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:37.991Z,1505246497.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:38.336Z,1505246498.336 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0029.lzma.bak
2017-09-12T20:01:38.337Z,1505246498.337 [DataOverHttps](INFO): SBD MOMSN=5086353
2017-09-12T20:01:38.392Z,1505246498.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:39.045Z,1505246499.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:39.125Z,1505246499.125 [Default:CheckIn:Read_Iridium] Stopped
2017-09-12T20:01:39.125Z,1505246499.125 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-12T20:01:39.125Z,1505246499.125 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-12T20:01:39.201Z,1505246499.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:42.482Z,1505246502.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:42.663Z,1505246502.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:43.026Z,1505246503.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:43.425Z,1505246503.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:43.798Z,1505246503.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:44.191Z,1505246504.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:44.592Z,1505246504.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:44.990Z,1505246504.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:45.388Z,1505246505.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:45.789Z,1505246505.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:46.211Z,1505246506.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:46.586Z,1505246506.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:46.995Z,1505246506.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:47.410Z,1505246507.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:47.814Z,1505246507.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:48.199Z,1505246508.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:48.631Z,1505246508.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:49.008Z,1505246509.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:49.399Z,1505246509.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:49.797Z,1505246509.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:50.207Z,1505246510.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:50.599Z,1505246510.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:51.015Z,1505246511.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:51.411Z,1505246511.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:51.787Z,1505246511.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:52.199Z,1505246512.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:52.596Z,1505246512.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:52.995Z,1505246512.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:53.397Z,1505246513.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:53.810Z,1505246513.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:54.205Z,1505246514.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:54.608Z,1505246514.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:54.987Z,1505246514.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:56.595Z,1505246516.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:56.989Z,1505246516.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:57.413Z,1505246517.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:57.820Z,1505246517.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:58.171Z,1505246518.171 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-12T20:01:58.190Z,1505246518.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:58.613Z,1505246518.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:58.987Z,1505246518.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:59.394Z,1505246519.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:01:59.795Z,1505246519.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:00.196Z,1505246520.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:00.599Z,1505246520.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:00.999Z,1505246520.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:01.400Z,1505246521.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:01.782Z,1505246521.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:02.189Z,1505246522.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:03.769Z,1505246523.769 [NAL9602](INFO): Powering down
2017-09-12T20:02:07.810Z,1505246527.810 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:55:15 
Warning battery low
CONNECT
2017-09-12T20:02:07.811Z,1505246527.811 [DAT](INFO): Got CONNECT
2017-09-12T20:02:07.811Z,1505246527.811 [DAT](INFO): entering command mode
2017-09-12T20:02:08.187Z,1505246528.187 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:02:08.609Z,1505246528.609 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:02:08.988Z,1505246528.988 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:02:09.393Z,1505246529.393 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:02:09.393Z,1505246529.393 [DAT](DEBUG): Found user prompt
2017-09-12T20:02:09.393Z,1505246529.393 [DAT](INFO): command mode acknowledged
2017-09-12T20:02:09.795Z,1505246529.795 [DAT](INFO): setting local address to 2
2017-09-12T20:02:10.197Z,1505246530.197 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:02:10.198Z,1505246530.198 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:02:10.198Z,1505246530.198 [DAT] Communications Fault, FailCount= 3
2017-09-12T20:02:10.198Z,1505246530.198 [DAT](ERROR): Communications Fault
2017-09-12T20:02:10.296Z,1505246530.296 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:02:10.602Z,1505246530.602 [DAT](INFO): Powering down
2017-09-12T20:02:11.532Z,1505246531.532 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:02:11.532Z,1505246531.532 [DAT] No Fault, FailCount= 3
2017-09-12T20:02:13.796Z,1505246533.796 [DAT](INFO): Powering up
2017-09-12T20:02:13.797Z,1505246533.797 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:02:27.402Z,1505246547.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:27.788Z,1505246547.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:28.196Z,1505246548.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:28.603Z,1505246548.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:28.990Z,1505246548.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:29.403Z,1505246549.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:29.795Z,1505246549.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:30.202Z,1505246550.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:30.596Z,1505246550.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:30.999Z,1505246550.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:31.393Z,1505246551.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:31.789Z,1505246551.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:32.198Z,1505246552.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:32.602Z,1505246552.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:33.002Z,1505246553.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:33.398Z,1505246553.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:33.799Z,1505246553.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:34.187Z,1505246554.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:34.583Z,1505246554.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:34.986Z,1505246554.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:35.387Z,1505246555.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:35.799Z,1505246555.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:36.196Z,1505246556.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:36.600Z,1505246556.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:36.994Z,1505246556.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:37.399Z,1505246557.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:37.786Z,1505246557.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:38.199Z,1505246558.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:38.599Z,1505246558.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:38.988Z,1505246558.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:39.385Z,1505246559.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:39.799Z,1505246559.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:43.246Z,1505246563.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:43.472Z,1505246563.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:43.855Z,1505246563.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:44.262Z,1505246564.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:44.269Z,1505246564.269 [PNI_TCM](ERROR): CRC does not match. Expected:0x62232 got:0x7105
2017-09-12T20:02:44.656Z,1505246564.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:45.049Z,1505246565.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:45.865Z,1505246565.865 [PNI_TCM](ERROR): CRC does not match. Expected:0x43676 got:0x11293
2017-09-12T20:02:47.465Z,1505246567.465 [PNI_TCM](ERROR): CRC does not match. Expected:0x59557 got:0x60700
2017-09-12T20:02:52.268Z,1505246572.268 [PNI_TCM](ERROR): CRC does not match. Expected:0x62554 got:0x593
2017-09-12T20:02:53.875Z,1505246573.875 [PNI_TCM](ERROR): CRC does not match. Expected:0x22085 got:0x39407
2017-09-12T20:02:55.464Z,1505246575.464 [PNI_TCM](ERROR): CRC does not match. Expected:0x37876 got:0x39485
2017-09-12T20:02:56.255Z,1505246576.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:56.662Z,1505246576.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:02:57.064Z,1505246577.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:00.264Z,1505246580.264 [PNI_TCM](ERROR): CRC does not match. Expected:0x13223 got:0x23141
2017-09-12T20:03:03.064Z,1505246583.064 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:56:10 
Warning battery low
CONNECT
2017-09-12T20:03:03.064Z,1505246583.064 [DAT](INFO): Got CONNECT
2017-09-12T20:03:03.065Z,1505246583.065 [DAT](INFO): entering command mode
2017-09-12T20:03:03.460Z,1505246583.460 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:03:03.871Z,1505246583.871 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:03:04.261Z,1505246584.261 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:03:04.648Z,1505246584.648 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:03:04.648Z,1505246584.648 [DAT](DEBUG): Found user prompt
2017-09-12T20:03:04.648Z,1505246584.648 [DAT](INFO): command mode acknowledged
2017-09-12T20:03:05.068Z,1505246585.068 [DAT](INFO): setting local address to 2
2017-09-12T20:03:05.448Z,1505246585.448 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:03:05.449Z,1505246585.449 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:03:05.449Z,1505246585.449 [DAT] Communications Fault, FailCount= 4
2017-09-12T20:03:05.449Z,1505246585.449 [DAT](ERROR): Communications Fault
2017-09-12T20:03:05.536Z,1505246585.536 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:03:05.855Z,1505246585.855 [DAT](INFO): Powering down
2017-09-12T20:03:06.671Z,1505246586.671 [PNI_TCM](ERROR): CRC does not match. Expected:0x27462 got:0x30727
2017-09-12T20:03:06.723Z,1505246586.723 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:03:06.723Z,1505246586.723 [DAT] No Fault, FailCount= 4
2017-09-12T20:03:08.271Z,1505246588.271 [PNI_TCM](ERROR): CRC does not match. Expected:0x43632 got:0x34588
2017-09-12T20:03:09.053Z,1505246589.053 [DAT](INFO): Powering up
2017-09-12T20:03:09.053Z,1505246589.053 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:03:09.868Z,1505246589.868 [PNI_TCM](ERROR): CRC does not match. Expected:0x58337 got:0x27937
2017-09-12T20:03:13.047Z,1505246593.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:13.064Z,1505246593.064 [PNI_TCM](ERROR): CRC does not match. Expected:0x948 got:0x49410
2017-09-12T20:03:13.461Z,1505246593.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:13.850Z,1505246593.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:14.256Z,1505246594.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:14.655Z,1505246594.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:14.664Z,1505246594.664 [PNI_TCM](ERROR): CRC does not match. Expected:0x5228 got:0x6465
2017-09-12T20:03:15.065Z,1505246595.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:15.462Z,1505246595.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:15.865Z,1505246595.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:16.260Z,1505246596.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:16.648Z,1505246596.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:17.052Z,1505246597.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:17.449Z,1505246597.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:17.851Z,1505246597.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:18.260Z,1505246598.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:18.665Z,1505246598.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:03:19.470Z,1505246599.470 [PNI_TCM](ERROR): CRC does not match. Expected:0x35542 got:0x49049
2017-09-12T20:03:27.861Z,1505246607.861 [PNI_TCM](ERROR): CRC does not match. Expected:0x54639 got:0x16729
2017-09-12T20:03:30.670Z,1505246610.670 [PNI_TCM](ERROR): CRC does not match. Expected:0x27061 got:0x49410
2017-09-12T20:03:32.661Z,1505246612.661 [PNI_TCM](ERROR): CRC does not match. Expected:0x51060 got:0x2589
2017-09-12T20:03:35.462Z,1505246615.462 [PNI_TCM](ERROR): CRC does not match. Expected:0x64869 got:0x31706
2017-09-12T20:03:37.478Z,1505246617.478 [PNI_TCM](ERROR): CRC does not match. Expected:0x34858 got:0x26750
2017-09-12T20:03:38.666Z,1505246618.666 [PNI_TCM](ERROR): CRC does not match. Expected:0x19994 got:0x33089
2017-09-12T20:03:58.332Z,1505246638.332 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:57:05 
Warning battery low
CONNECT
2017-09-12T20:03:58.333Z,1505246638.333 [DAT](INFO): Got CONNECT
2017-09-12T20:03:58.333Z,1505246638.333 [DAT](INFO): entering command mode
2017-09-12T20:03:58.718Z,1505246638.718 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:03:59.118Z,1505246639.118 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:03:59.519Z,1505246639.519 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:03:59.928Z,1505246639.928 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:03:59.928Z,1505246639.928 [DAT](DEBUG): Found user prompt
2017-09-12T20:03:59.928Z,1505246639.928 [DAT](INFO): command mode acknowledged
2017-09-12T20:04:00.323Z,1505246640.323 [DAT](INFO): setting local address to 2
2017-09-12T20:04:00.717Z,1505246640.717 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:04:00.718Z,1505246640.718 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:04:00.718Z,1505246640.718 [DAT] Communications Fault, FailCount= 5
2017-09-12T20:04:00.718Z,1505246640.718 [DAT](ERROR): Communications Fault
2017-09-12T20:04:00.806Z,1505246640.806 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:04:01.117Z,1505246641.117 [DAT](INFO): Powering down
2017-09-12T20:04:01.997Z,1505246641.997 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:04:01.997Z,1505246641.997 [DAT] No Fault, FailCount= 5
2017-09-12T20:04:04.318Z,1505246644.318 [DAT](INFO): Powering up
2017-09-12T20:04:04.319Z,1505246644.319 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:04:08.326Z,1505246648.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:08.726Z,1505246648.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:09.126Z,1505246649.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:10.737Z,1505246650.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:11.138Z,1505246651.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:11.519Z,1505246651.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:11.927Z,1505246651.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:12.323Z,1505246652.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:12.725Z,1505246652.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:13.126Z,1505246653.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:13.529Z,1505246653.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:13.929Z,1505246653.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:14.335Z,1505246654.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:14.731Z,1505246654.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:15.116Z,1505246655.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:15.539Z,1505246655.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:15.918Z,1505246655.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:16.319Z,1505246656.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:16.727Z,1505246656.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:17.127Z,1505246657.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:17.527Z,1505246657.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:17.934Z,1505246657.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:18.328Z,1505246658.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:18.718Z,1505246658.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:19.131Z,1505246659.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:19.519Z,1505246659.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:19.930Z,1505246659.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:20.326Z,1505246660.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:20.723Z,1505246660.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:21.139Z,1505246661.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:27.526Z,1505246667.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:27.925Z,1505246667.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:28.317Z,1505246668.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:28.718Z,1505246668.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:29.119Z,1505246669.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:29.519Z,1505246669.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:29.920Z,1505246669.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:30.321Z,1505246670.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:30.729Z,1505246670.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:31.130Z,1505246671.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:31.529Z,1505246671.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:31.919Z,1505246671.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:32.320Z,1505246672.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:32.721Z,1505246672.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:33.131Z,1505246673.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:33.529Z,1505246673.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:33.918Z,1505246673.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:34.319Z,1505246674.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:34.719Z,1505246674.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:35.125Z,1505246675.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:35.528Z,1505246675.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:35.920Z,1505246675.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:36.331Z,1505246676.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:36.730Z,1505246676.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:37.140Z,1505246677.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:37.520Z,1505246677.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:37.916Z,1505246677.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:38.317Z,1505246678.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:38.722Z,1505246678.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:39.130Z,1505246679.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:39.526Z,1505246679.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:39.937Z,1505246679.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:43.190Z,1505246683.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:43.393Z,1505246683.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:43.766Z,1505246683.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:44.169Z,1505246684.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:44.565Z,1505246684.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:44.968Z,1505246684.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:04:53.786Z,1505246693.786 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:58:01 
Warning battery low
CONNECT
2017-09-12T20:04:53.786Z,1505246693.786 [DAT](INFO): Got CONNECT
2017-09-12T20:04:53.787Z,1505246693.787 [DAT](INFO): entering command mode
2017-09-12T20:04:54.186Z,1505246694.186 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:04:54.598Z,1505246694.598 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:04:54.975Z,1505246694.975 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:04:55.376Z,1505246695.376 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:04:55.376Z,1505246695.376 [DAT](DEBUG): Found user prompt
2017-09-12T20:04:55.376Z,1505246695.376 [DAT](INFO): command mode acknowledged
2017-09-12T20:04:55.782Z,1505246695.782 [DAT](INFO): setting local address to 2
2017-09-12T20:04:56.160Z,1505246696.160 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:04:56.161Z,1505246696.161 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:04:56.161Z,1505246696.161 [DAT] Communications Fault, FailCount= 6
2017-09-12T20:04:56.161Z,1505246696.161 [DAT](ERROR): Communications Fault
2017-09-12T20:04:56.258Z,1505246696.258 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:04:56.583Z,1505246696.583 [DAT](INFO): Powering down
2017-09-12T20:04:57.462Z,1505246697.462 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:04:57.462Z,1505246697.462 [DAT] No Fault, FailCount= 6
2017-09-12T20:04:59.771Z,1505246699.771 [DAT](INFO): Powering up
2017-09-12T20:04:59.771Z,1505246699.771 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:05:49.262Z,1505246749.262 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:58:56 
Warning battery low
CONNECT
2017-09-12T20:05:49.262Z,1505246749.262 [DAT](INFO): Got CONNECT
2017-09-12T20:05:49.263Z,1505246749.263 [DAT](INFO): entering command mode
2017-09-12T20:05:49.657Z,1505246749.657 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:05:50.046Z,1505246750.046 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:05:50.446Z,1505246750.446 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:05:50.856Z,1505246750.856 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:05:50.856Z,1505246750.856 [DAT](DEBUG): Found user prompt
2017-09-12T20:05:50.856Z,1505246750.856 [DAT](INFO): command mode acknowledged
2017-09-12T20:05:51.254Z,1505246751.254 [DAT](INFO): setting local address to 2
2017-09-12T20:05:51.660Z,1505246751.660 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:05:51.661Z,1505246751.661 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:05:51.661Z,1505246751.661 [DAT] Communications Fault, FailCount= 7
2017-09-12T20:05:51.661Z,1505246751.661 [DAT](ERROR): Communications Fault
2017-09-12T20:05:51.743Z,1505246751.743 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:05:52.045Z,1505246752.045 [DAT](INFO): Powering down
2017-09-12T20:05:52.908Z,1505246752.908 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:05:52.908Z,1505246752.908 [DAT] No Fault, FailCount= 7
2017-09-12T20:05:55.246Z,1505246755.246 [DAT](INFO): Powering up
2017-09-12T20:05:55.246Z,1505246755.246 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:06:39.295Z,1505246799.295 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-12T20:06:39.295Z,1505246799.295 [Default:CheckIn:C.Wait] Stopped
2017-09-12T20:06:39.295Z,1505246799.295 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T20:06:39.295Z,1505246799.295 [Default:CheckIn:D] Running Loop=1
2017-09-12T20:06:39.727Z,1505246799.727 [Default:CheckIn:D] Stopped
2017-09-12T20:06:39.728Z,1505246799.728 [Default:CheckIn:E] Running Loop=1
2017-09-12T20:06:40.098Z,1505246800.098 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 65.522449 min 
2017-09-12T20:06:40.098Z,1505246800.098 [Default:CheckIn:E] Stopped
2017-09-12T20:06:40.098Z,1505246800.098 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-12T20:06:40.098Z,1505246800.098 [Default:CheckIn] Stopped
2017-09-12T20:06:40.098Z,1505246800.098 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-12T20:06:40.099Z,1505246800.099 [Default:CheckIn](INFO): Running loop #8
2017-09-12T20:06:40.099Z,1505246800.099 [Default:CheckIn] Running Loop=8
2017-09-12T20:06:40.103Z,1505246800.103 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T20:06:40.103Z,1505246800.103 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T20:06:43.712Z,1505246803.712 [NAL9602](INFO): Powering up
2017-09-12T20:06:44.689Z,1505246804.689 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 05:59:52 
Warning battery low
CONNECT
2017-09-12T20:06:44.689Z,1505246804.689 [DAT](INFO): Got CONNECT
2017-09-12T20:06:44.690Z,1505246804.690 [DAT](INFO): entering command mode
2017-09-12T20:06:45.089Z,1505246805.089 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:06:45.484Z,1505246805.484 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:06:45.872Z,1505246805.872 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:06:46.269Z,1505246806.269 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:06:46.269Z,1505246806.269 [DAT](DEBUG): Found user prompt
2017-09-12T20:06:46.269Z,1505246806.269 [DAT](INFO): command mode acknowledged
2017-09-12T20:06:46.679Z,1505246806.679 [DAT](INFO): setting local address to 2
2017-09-12T20:06:47.078Z,1505246807.078 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:06:47.079Z,1505246807.079 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:06:47.079Z,1505246807.079 [DAT] Communications Fault, FailCount= 8
2017-09-12T20:06:47.079Z,1505246807.079 [DAT](ERROR): Communications Fault
2017-09-12T20:06:47.150Z,1505246807.150 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:06:47.151Z,1505246807.151 [CBIT](CRITICAL): Communications Fault in component: DAT
2017-09-12T20:06:47.481Z,1505246807.481 [DAT](INFO): Powering down
2017-09-12T20:06:47.659Z,1505246807.659 [CBIT](INFO): Critical error at 20170912T200647
2017-09-12T20:06:54.652Z,1505246814.652 [NAL9602](INFO): NAL9602 initialized
2017-09-12T20:06:55.865Z,1505246815.865 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-09-12T20:06:55.865Z,1505246815.865 [NAL9602] Data Fault, FailCount= 2
2017-09-12T20:06:55.865Z,1505246815.865 [NAL9602](ERROR): Data Fault
2017-09-12T20:06:55.964Z,1505246815.964 [CBIT](ERROR): Data Fault in component: NAL9602
2017-09-12T20:06:56.254Z,1505246816.254 [NAL9602](INFO): Powering down
2017-09-12T20:06:57.189Z,1505246817.189 [CBIT](INFO): Clearing failed state for component NAL9602
2017-09-12T20:06:57.189Z,1505246817.189 [NAL9602] No Fault, FailCount= 2
2017-09-12T20:07:01.451Z,1505246821.451 [NAL9602](INFO): Powering up NAL9602
2017-09-12T20:07:12.252Z,1505246832.252 [NAL9602](INFO): NAL9602 initialized
2017-09-12T20:07:37.471Z,1505246857.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:37.869Z,1505246857.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:38.271Z,1505246858.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:38.680Z,1505246858.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:38.780Z,1505246858.780 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-12T20:07:39.080Z,1505246859.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:39.478Z,1505246859.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:39.876Z,1505246859.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:40.282Z,1505246860.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:40.701Z,1505246860.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:44.147Z,1505246864.147 [BPC1](ERROR): Failed to receive battery data
2017-09-12T20:07:44.147Z,1505246864.147 [BPC1] Communications Fault, FailCount= 1
2017-09-12T20:07:44.147Z,1505246864.147 [BPC1](ERROR): Communications Fault
2017-09-12T20:07:44.178Z,1505246864.178 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T20:07:45.103Z,1505246865.103 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T20:07:45.103Z,1505246865.103 [BPC1] No Fault, FailCount= 1
2017-09-12T20:07:49.820Z,1505246869.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:50.228Z,1505246870.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:50.633Z,1505246870.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:51.034Z,1505246871.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:51.419Z,1505246871.419 [NAL9602](INFO): SBD MO Status=2, MOMSN=481, MT Status=2, MTMSN=0
2017-09-12T20:07:51.419Z,1505246871.419 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T20:07:51.436Z,1505246871.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:51.878Z,1505246871.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:52.220Z,1505246872.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:52.624Z,1505246872.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:53.029Z,1505246873.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:53.429Z,1505246873.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:53.830Z,1505246873.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:54.234Z,1505246874.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:54.622Z,1505246874.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:55.037Z,1505246875.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:55.443Z,1505246875.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:55.860Z,1505246875.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:56.253Z,1505246876.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:56.628Z,1505246876.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:57.035Z,1505246877.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:57.460Z,1505246877.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:57.830Z,1505246877.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:58.226Z,1505246878.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:58.632Z,1505246878.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:59.043Z,1505246879.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:59.443Z,1505246879.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:07:59.841Z,1505246879.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:00.261Z,1505246880.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:00.621Z,1505246880.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:01.029Z,1505246881.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:01.435Z,1505246881.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:01.835Z,1505246881.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:02.235Z,1505246882.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:02.637Z,1505246882.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:03.025Z,1505246883.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:03.421Z,1505246883.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:03.830Z,1505246883.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:04.223Z,1505246884.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:04.623Z,1505246884.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:05.031Z,1505246885.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:05.427Z,1505246885.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:05.835Z,1505246885.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:06.242Z,1505246886.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:06.629Z,1505246886.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:07.023Z,1505246887.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:07.428Z,1505246887.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:07.821Z,1505246887.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:08.235Z,1505246888.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:08.644Z,1505246888.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:09.035Z,1505246889.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:09.437Z,1505246889.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:09.825Z,1505246889.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:08:12.220Z,1505246892.220 [NAL9602](INFO): SBD MO Status=2, MOMSN=481, MT Status=2, MTMSN=0
2017-09-12T20:08:12.220Z,1505246892.220 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T20:09:23.144Z,1505246963.144 [NAL9602](INFO): SBD MO Status=2, MOMSN=481, MT Status=2, MTMSN=0
2017-09-12T20:09:23.144Z,1505246963.144 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-09-12T20:09:31.179Z,1505246971.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:31.570Z,1505246971.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:31.975Z,1505246971.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:32.369Z,1505246972.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:32.758Z,1505246972.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:33.159Z,1505246973.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:33.560Z,1505246973.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:33.960Z,1505246973.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:34.361Z,1505246974.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:34.766Z,1505246974.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:35.176Z,1505246975.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:35.573Z,1505246975.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:35.965Z,1505246975.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:36.371Z,1505246976.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:09:36.783Z,1505246976.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-09-12T20:10:41.473Z,1505247041.473 [BPC1](ERROR): Failed to parse bank B battery data
2017-09-12T20:10:41.473Z,1505247041.473 [BPC1] Data Fault, FailCount= 1
2017-09-12T20:10:41.473Z,1505247041.473 [BPC1](ERROR): Data Fault
2017-09-12T20:10:41.521Z,1505247041.521 [CBIT](ERROR): Data Fault in component: BPC1
2017-09-12T20:10:45.450Z,1505247045.450 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T20:10:45.450Z,1505247045.450 [BPC1] No Fault, FailCount= 1
2017-09-12T20:11:40.220Z,1505247100.220 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-09-12T20:06:40.1Z
2017-09-12T20:11:40.221Z,1505247100.221 [Default:CheckIn:Read_GPS] Stopped
2017-09-12T20:11:40.221Z,1505247100.221 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-09-12T20:11:44.808Z,1505247104.808 [DataOverHttps](INFO): Sending 92 bytes from file Logs/20170912T185724/Courier0032.lzma
2017-09-12T20:11:45.605Z,1505247105.605 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Courier0032.lzma.bak
2017-09-12T20:11:45.605Z,1505247105.605 [DataOverHttps](INFO): SBD MOMSN=5086358
2017-09-12T20:11:49.898Z,1505247109.898 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:11:49.898Z,1505247109.898 [DAT] No Fault, FailCount= 8
2017-09-12T20:11:50.024Z,1505247110.024 [DAT](INFO): Powering up
2017-09-12T20:11:50.024Z,1505247110.024 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:11:54.946Z,1505247114.946 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20170912T185724/Express0033.lzma
2017-09-12T20:11:55.697Z,1505247115.697 [DataOverHttps](INFO): Moved sent file to Logs/20170912T185724/Express0033.lzma.bak
2017-09-12T20:11:55.697Z,1505247115.697 [DataOverHttps](INFO): SBD MOMSN=5086361
2017-09-12T20:11:56.443Z,1505247116.443 [Default:CheckIn:Read_Iridium] Stopped
2017-09-12T20:11:56.443Z,1505247116.443 [Default:CheckIn:C.Wait] Running Loop=1
2017-09-12T20:11:56.443Z,1505247116.443 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-09-12T20:12:15.127Z,1505247135.127 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-09-12T20:12:20.739Z,1505247140.739 [NAL9602](INFO): Powering down
2017-09-12T20:12:39.971Z,1505247159.971 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 06:05:47 
Warning battery low
CONNECT
2017-09-12T20:12:39.971Z,1505247159.971 [DAT](INFO): Got CONNECT
2017-09-12T20:12:39.972Z,1505247159.972 [DAT](INFO): entering command mode
2017-09-12T20:12:40.342Z,1505247160.342 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:12:40.755Z,1505247160.755 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:12:41.144Z,1505247161.144 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:12:41.552Z,1505247161.552 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:12:41.552Z,1505247161.552 [DAT](DEBUG): Found user prompt
2017-09-12T20:12:41.553Z,1505247161.553 [DAT](INFO): command mode acknowledged
2017-09-12T20:12:41.956Z,1505247161.956 [DAT](INFO): setting local address to 2
2017-09-12T20:12:42.350Z,1505247162.350 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:12:42.351Z,1505247162.351 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:12:42.351Z,1505247162.351 [DAT] Communications Fault, FailCount= 1
2017-09-12T20:12:42.351Z,1505247162.351 [DAT](ERROR): Communications Fault
2017-09-12T20:12:42.436Z,1505247162.436 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:12:42.754Z,1505247162.754 [DAT](INFO): Powering down
2017-09-12T20:12:43.637Z,1505247163.637 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:12:43.637Z,1505247163.637 [DAT] No Fault, FailCount= 1
2017-09-12T20:12:45.947Z,1505247165.947 [DAT](INFO): Powering up
2017-09-12T20:12:45.948Z,1505247165.948 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:13:35.496Z,1505247215.496 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 06:06:43 
Warning battery low
CONNECT
2017-09-12T20:13:35.496Z,1505247215.496 [DAT](INFO): Got CONNECT
2017-09-12T20:13:35.497Z,1505247215.497 [DAT](INFO): entering command mode
2017-09-12T20:13:35.883Z,1505247215.883 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:13:36.291Z,1505247216.291 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:13:36.694Z,1505247216.694 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:13:37.095Z,1505247217.095 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:13:37.095Z,1505247217.095 [DAT](DEBUG): Found user prompt
2017-09-12T20:13:37.095Z,1505247217.095 [DAT](INFO): command mode acknowledged
2017-09-12T20:13:37.493Z,1505247217.493 [DAT](INFO): setting local address to 2
2017-09-12T20:13:37.902Z,1505247217.902 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:13:37.903Z,1505247217.903 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:13:37.903Z,1505247217.903 [DAT] Communications Fault, FailCount= 2
2017-09-12T20:13:37.903Z,1505247217.903 [DAT](ERROR): Communications Fault
2017-09-12T20:13:37.968Z,1505247217.968 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:13:38.284Z,1505247218.284 [DAT](INFO): Powering down
2017-09-12T20:13:39.160Z,1505247219.160 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:13:39.160Z,1505247219.160 [DAT] No Fault, FailCount= 2
2017-09-12T20:13:41.502Z,1505247221.502 [DAT](INFO): Powering up
2017-09-12T20:13:41.502Z,1505247221.502 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:14:31.603Z,1505247271.603 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 06:07:38 
Warning battery low
CONNECT
2017-09-12T20:14:31.603Z,1505247271.603 [DAT](INFO): Got CONNECT
2017-09-12T20:14:31.604Z,1505247271.604 [DAT](INFO): entering command mode
2017-09-12T20:14:31.999Z,1505247271.999 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:14:32.408Z,1505247272.408 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:14:32.800Z,1505247272.800 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:14:32.800Z,1505247272.800 [DAT](DEBUG): Found user prompt
2017-09-12T20:14:32.800Z,1505247272.800 [DAT](INFO): command mode acknowledged
2017-09-12T20:14:33.207Z,1505247273.207 [DAT](INFO): setting local address to 2
2017-09-12T20:14:33.606Z,1505247273.606 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:14:33.607Z,1505247273.607 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:14:33.607Z,1505247273.607 [DAT] Communications Fault, FailCount= 3
2017-09-12T20:14:33.608Z,1505247273.608 [DAT](ERROR): Communications Fault
2017-09-12T20:14:33.662Z,1505247273.662 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:14:34.010Z,1505247274.010 [DAT](INFO): Powering down
2017-09-12T20:14:34.873Z,1505247274.873 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:14:34.873Z,1505247274.873 [DAT] No Fault, FailCount= 3
2017-09-12T20:14:37.211Z,1505247277.211 [DAT](INFO): Powering up
2017-09-12T20:14:37.212Z,1505247277.212 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:15:00.875Z,1505247300.875 [BPC1](ERROR): Failed to receive battery data
2017-09-12T20:15:00.875Z,1505247300.875 [BPC1] Communications Fault, FailCount= 1
2017-09-12T20:15:00.875Z,1505247300.875 [BPC1](ERROR): Communications Fault
2017-09-12T20:15:00.936Z,1505247300.936 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T20:15:01.844Z,1505247301.844 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T20:15:01.844Z,1505247301.844 [BPC1] No Fault, FailCount= 1
2017-09-12T20:15:26.590Z,1505247326.590 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 06:08:34 
Warning battery low
CONNECT
2017-09-12T20:15:26.590Z,1505247326.590 [DAT](INFO): Got CONNECT
2017-09-12T20:15:26.591Z,1505247326.591 [DAT](INFO): entering command mode
2017-09-12T20:15:26.977Z,1505247326.977 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:15:27.385Z,1505247327.385 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:15:27.778Z,1505247327.778 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:15:28.176Z,1505247328.176 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:15:28.176Z,1505247328.176 [DAT](DEBUG): Found user prompt
2017-09-12T20:15:28.176Z,1505247328.176 [DAT](INFO): command mode acknowledged
2017-09-12T20:15:28.577Z,1505247328.577 [DAT](INFO): setting local address to 2
2017-09-12T20:15:28.981Z,1505247328.981 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:15:28.982Z,1505247328.982 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:15:28.982Z,1505247328.982 [DAT] Communications Fault, FailCount= 4
2017-09-12T20:15:28.982Z,1505247328.982 [DAT](ERROR): Communications Fault
2017-09-12T20:15:29.063Z,1505247329.063 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:15:29.385Z,1505247329.385 [DAT](INFO): Powering down
2017-09-12T20:15:30.258Z,1505247330.258 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:15:30.258Z,1505247330.258 [DAT] No Fault, FailCount= 4
2017-09-12T20:15:32.590Z,1505247332.590 [DAT](INFO): Powering up
2017-09-12T20:15:32.590Z,1505247332.590 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:16:22.150Z,1505247382.150 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 06:09:29 
Warning battery low
CONNECT
2017-09-12T20:16:22.150Z,1505247382.150 [DAT](INFO): Got CONNECT
2017-09-12T20:16:22.151Z,1505247382.151 [DAT](INFO): entering command mode
2017-09-12T20:16:22.534Z,1505247382.534 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:16:22.939Z,1505247382.939 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:16:23.338Z,1505247383.338 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:16:23.736Z,1505247383.736 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:16:23.736Z,1505247383.736 [DAT](DEBUG): Found user prompt
2017-09-12T20:16:23.736Z,1505247383.736 [DAT](INFO): command mode acknowledged
2017-09-12T20:16:24.142Z,1505247384.142 [DAT](INFO): setting local address to 2
2017-09-12T20:16:24.548Z,1505247384.548 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:16:24.549Z,1505247384.549 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:16:24.550Z,1505247384.550 [DAT] Communications Fault, FailCount= 5
2017-09-12T20:16:24.550Z,1505247384.550 [DAT](ERROR): Communications Fault
2017-09-12T20:16:24.627Z,1505247384.627 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:16:24.933Z,1505247384.933 [DAT](INFO): Powering down
2017-09-12T20:16:25.790Z,1505247385.790 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:16:25.790Z,1505247385.790 [DAT] No Fault, FailCount= 5
2017-09-12T20:16:28.130Z,1505247388.130 [DAT](INFO): Powering up
2017-09-12T20:16:28.131Z,1505247388.131 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:16:57.033Z,1505247417.033 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-09-12T20:16:57.033Z,1505247417.033 [Default:CheckIn:C.Wait] Stopped
2017-09-12T20:16:57.033Z,1505247417.033 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-09-12T20:16:57.033Z,1505247417.033 [Default:CheckIn:D] Running Loop=1
2017-09-12T20:16:57.383Z,1505247417.383 [Default:CheckIn:D] Stopped
2017-09-12T20:16:57.383Z,1505247417.383 [Default:CheckIn:E] Running Loop=1
2017-09-12T20:16:57.770Z,1505247417.770 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 75.816715 min 
2017-09-12T20:16:57.770Z,1505247417.770 [Default:CheckIn:E] Stopped
2017-09-12T20:16:57.770Z,1505247417.770 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-09-12T20:16:57.770Z,1505247417.770 [Default:CheckIn] Stopped
2017-09-12T20:16:57.770Z,1505247417.770 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-09-12T20:16:57.771Z,1505247417.771 [Default:CheckIn](INFO): Running loop #9
2017-09-12T20:16:57.771Z,1505247417.771 [Default:CheckIn] Running Loop=9
2017-09-12T20:16:57.771Z,1505247417.771 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-09-12T20:16:57.771Z,1505247417.771 [Default:CheckIn:Read_GPS] Running Loop=1
2017-09-12T20:17:01.653Z,1505247421.653 [NAL9602](INFO): Powering up
2017-09-12T20:17:12.613Z,1505247432.613 [NAL9602](INFO): NAL9602 initialized
2017-09-12T20:17:13.394Z,1505247433.394 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-09-12T20:17:13.394Z,1505247433.394 [NAL9602] Data Fault, FailCount= 3
2017-09-12T20:17:13.395Z,1505247433.395 [NAL9602](ERROR): Data Fault
2017-09-12T20:17:13.501Z,1505247433.501 [CBIT](ERROR): Data Fault in component: NAL9602
2017-09-12T20:17:13.803Z,1505247433.803 [NAL9602](INFO): Powering down
2017-09-12T20:17:14.690Z,1505247434.690 [CBIT](INFO): Clearing failed state for component NAL9602
2017-09-12T20:17:14.690Z,1505247434.690 [NAL9602] No Fault, FailCount= 3
2017-09-12T20:17:17.433Z,1505247437.433 [DAT](DEBUG): 
Teledyne Benthos ATM-900 Series
MF Frequency Band
Directional Acoustic Transponder version 8.3.1
Jan  3 2000 06:10:25 
Warning battery low
CONNECT
2017-09-12T20:17:17.433Z,1505247437.433 [DAT](INFO): Got CONNECT
2017-09-12T20:17:17.434Z,1505247437.434 [DAT](INFO): entering command mode
2017-09-12T20:17:17.820Z,1505247437.820 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:17:18.215Z,1505247438.215 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:17:18.626Z,1505247438.626 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:17:18.995Z,1505247438.995 [NAL9602](INFO): Powering up NAL9602
2017-09-12T20:17:19.033Z,1505247439.033 [DAT](DEBUG): checking for command mode acknowledgment
2017-09-12T20:17:19.034Z,1505247439.034 [DAT](DEBUG): Found user prompt
2017-09-12T20:17:19.034Z,1505247439.034 [DAT](INFO): command mode acknowledged
2017-09-12T20:17:19.421Z,1505247439.421 [DAT](INFO): setting local address to 2
2017-09-12T20:17:19.813Z,1505247439.813 [DAT](DEBUG): checking for local address setting acknowledgment
2017-09-12T20:17:19.827Z,1505247439.827 [DAT](ERROR): failed to set local address; deviceResponse_:  02400 bits/sec 1 of 4

2017-09-12T20:17:19.827Z,1505247439.827 [DAT] Communications Fault, FailCount= 6
2017-09-12T20:17:19.827Z,1505247439.827 [DAT](ERROR): Communications Fault
2017-09-12T20:17:19.939Z,1505247439.939 [CBIT](ERROR): Communications Fault in component: DAT
2017-09-12T20:17:20.232Z,1505247440.232 [DAT](INFO): Powering down
2017-09-12T20:17:21.111Z,1505247441.111 [CBIT](INFO): Clearing failed state for component DAT
2017-09-12T20:17:21.111Z,1505247441.111 [DAT] No Fault, FailCount= 6
2017-09-12T20:17:23.419Z,1505247443.419 [DAT](INFO): Powering up
2017-09-12T20:17:23.420Z,1505247443.420 [DAT](DEBUG): Initializing DAT.
2017-09-12T20:17:30.197Z,1505247450.197 [NAL9602](INFO): NAL9602 initialized
2017-09-12T20:17:33.846Z,1505247453.846 [BPC1](ERROR): Failed to receive battery data
2017-09-12T20:17:33.846Z,1505247453.846 [BPC1] Communications Fault, FailCount= 1
2017-09-12T20:17:33.846Z,1505247453.846 [BPC1](ERROR): Communications Fault
2017-09-12T20:17:33.903Z,1505247453.903 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T20:17:35.086Z,1505247455.086 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T20:17:35.086Z,1505247455.086 [BPC1] No Fault, FailCount= 1
2017-09-12T20:17:39.102Z,1505247459.102 [CBIT](DEBUG): EFC running - data check-sum false
2017-09-12T20:17:54.621Z,1505247474.621 [BPC1](ERROR): Failed to receive battery data
2017-09-12T20:17:54.621Z,1505247474.621 [BPC1] Communications Fault, FailCount= 2
2017-09-12T20:17:54.621Z,1505247474.621 [BPC1](ERROR): Communications Fault
2017-09-12T20:17:54.719Z,1505247474.719 [CBIT](ERROR): Communications Fault in component: BPC1
2017-09-12T20:17:55.898Z,1505247475.898 [CBIT](INFO): Clearing failed state for component BPC1
2017-09-12T20:17:55.898Z,1505247475.898 [BPC1] No Fault, FailCount= 2
2017-09-12T20:18:03.976Z,1505247483.976 [NAL9602](INFO): SBD MO Status=2, MOMSN=481, MT Status=2, MTMSN=0
2017-09-12T20:18:03.976Z,1505247483.976 [NAL9602](ERROR): Failed to initiate SBD